aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: never linger on process exitVladimir Davydov2014-09-133-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 093facf3634da1b0c2cc7ed106f1983da901bbab upstream. If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix SSP acceptor just-works confirmation without MITMJohan Hedberg2014-07-111-2/+5
| | | | | | | | | | | | | | | | | | | | | | | commit ba15a58b179ed76a7e887177f2b06de12c58ec8f upstream. From the Bluetooth Core Specification 4.1 page 1958: "if both devices have set the Authentication_Requirements parameter to one of the MITM Protection Not Required options, authentication stage 1 shall function as if both devices set their IO capabilities to DisplayOnly (e.g., Numeric comparison with automatic confirmation on both devices)" So far our implementation has done user confirmation for all just-works cases regardless of the MITM requirements, however following the specification to the word means that we should not be doing confirmation when neither side has the MITM flag set. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: s/conn->flags/conn->pend/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix check for connection encryptionJohan Hedberg2014-07-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit e694788d73efe139b24f78b036deb97fe57fa8cb upstream. The conn->link_key variable tracks the type of link key in use. It is set whenever we respond to a link key request as well as when we get a link key notification event. These two events do not however always guarantee that encryption is enabled: getting a link key request and responding to it may only mean that the remote side has requested authentication but not encryption. On the other hand, the encrypt change event is a certain guarantee that encryption is enabled. The real encryption state is already tracked in the conn->link_mode variable through the HCI_LM_ENCRYPT bit. This patch fixes a check for encryption in the hci_conn_auth function to use the proper conn->link_mode value and thereby eliminates the chance of a false positive result. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix redundant encryption request for reauthenticationJohan Hedberg2014-06-091-3/+6
| | | | | | | | | | | | | | | | | | | commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream. When we're performing reauthentication (in order to elevate the security level from an unauthenticated key to an authenticated one) we do not need to issue any encryption command once authentication completes. Since the trigger for the encryption HCI command is the ENCRYPT_PEND flag this flag should not be set in this scenario. Instead, the REAUTH_PEND flag takes care of all necessary steps for reauthentication. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: - Adjust context - s/conn->flags/conn->pend/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa2014-01-033-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ] This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix invalid length check in l2cap_information_rsp()Jaganath Kanakkassery2013-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3f6fa3d489e127ca5a5b298eabac3ff5dbe0e112 upstream. The length check is invalid since the length varies with type of info response. This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888 Because of this, l2cap info rsp is not handled and command reject is sent. > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels < ACL data: handle 11 flags 0x00 dlen 10 L2CAP(s): Command rej: reason 0 Command not understood Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix crash in l2cap_build_cmd() with small MTUAnderson Lizardo2013-07-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 300b962e5244a1ea010df7e88595faa0085b461d upstream. If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus controller, memory corruption happens due to a memcpy() call with negative length. Fix this crash on either incoming or outgoing connections with a MTU smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE: [ 46.885433] BUG: unable to handle kernel paging request at f56ad000 [ 46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40 [ 46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060 [ 46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common [ 46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12 [ 46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 46.888037] Workqueue: hci0 hci_rx_work [bluetooth] [ 46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000 [ 46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0 [ 46.888037] EIP is at memcpy+0x1d/0x40 [ 46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2 [ 46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c [ 46.888037] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0 [ 46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 46.888037] DR6: ffff0ff0 DR7: 00000400 [ 46.888037] Stack: [ 46.888037] fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000 [ 46.888037] f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560 [ 46.888037] f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2 [ 46.888037] Call Trace: [ 46.888037] [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth] [ 46.888037] [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth] [ 46.888037] [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth] [ 46.888037] [<c019b37b>] ? trace_hardirqs_off+0xb/0x10 [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064ad20>] ? mutex_lock_nested+0x280/0x360 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<c064ad08>] ? mutex_lock_nested+0x268/0x360 [ 46.888037] [<c01a125b>] ? trace_hardirqs_on+0xb/0x10 [ 46.888037] [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth] [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth] [ 46.888037] [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth] [ 46.888037] [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth] [ 46.888037] [<c0158979>] process_one_work+0x1a9/0x600 [ 46.888037] [<c01588fb>] ? process_one_work+0x12b/0x600 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c0159187>] worker_thread+0xf7/0x320 [ 46.888037] [<c0159090>] ? rescuer_thread+0x290/0x290 [ 46.888037] [<c01602f8>] kthread+0xa8/0xb0 [ 46.888037] [<c0656777>] ret_from_kernel_thread+0x1b/0x28 [ 46.888037] [<c0160250>] ? flush_kthread_worker+0x120/0x120 [ 46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89 [ 46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c [ 46.888037] CR2: 00000000f56ad000 [ 46.888037] ---[ end trace 0217c1f4d78714a9 ]--- Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix missing length checks for L2CAP signalling PDUsJohan Hedberg2013-06-191-20/+65
| | | | | | | | | | | | | | | | | | | commit cb3b3152b2f5939d67005cff841a1ca748b19888 upstream. There has been code in place to check that the L2CAP length header matches the amount of data received, but many PDU handlers have not been checking that the data received actually matches that expected by the specific PDU. This patch adds passing the length header to the specific handler functions and ensures that those functions fail cleanly in the case of an incorrect amount of data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - Move uses of *req below the new check in l2cap_connect_req] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg()Mathias Krause2013-05-131-0/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit e11e0455c0d7d3d62276a0c55d9dfbc16779d691 ] If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: fix possible info leak in bt_sock_recvmsg()Mathias Krause2013-05-131-2/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 4683f42fde3977bdb4e8a09622788cc8b5313778 ] In case the socket is already shutting down, bt_sock_recvmsg() returns with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the msg_namelen assignment in front of the shutdown test. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix sending HCI commands after resetSzymon Janc2013-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit dbccd791a3fbbdac12c33834b73beff3984988e9 upstream. After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix handling of unexpected SMP PDUsJohan Hedberg2013-02-201-0/+13
| | | | | | | | | | | | | | | | commit 8cf9fa1240229cbdd888236c0c43fcbad680cf00 upstream. The conn->smp_chan pointer can be NULL if SMP PDUs arrive at unexpected moments. To avoid NULL pointer dereferences the code should be checking for this and disconnect if an unexpected SMP PDU arrives. This patch fixes the issue by adding a check for conn->smp_chan for all other PDUs except pairing request and security request (which are are the first PDUs to come to initialize the SMP context). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix incorrect strncpy() in hidp_setup_hid()Anderson Lizardo2013-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 0a9ab9bdb3e891762553f667066190c1d22ad62b upstream. The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Add missing lock nesting notationGustavo Padovan2013-01-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dc2a0e20fbc85a71c63aa4330b496fda33f6bf80 upstream. This patch fixes the following report, it happens when accepting rfcomm connections: [ 228.165378] ============================================= [ 228.165378] [ INFO: possible recursive locking detected ] [ 228.165378] 3.7.0-rc1-00536-gc1d5dc4 #120 Tainted: G W [ 228.165378] --------------------------------------------- [ 228.165378] bluetoothd/1341 is trying to acquire lock: [ 228.165378] (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at: [<ffffffffa0000aa0>] bt_accept_dequeue+0xa0/0x180 [bluetooth] [ 228.165378] [ 228.165378] but task is already holding lock: [ 228.165378] (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at: [<ffffffffa0205118>] rfcomm_sock_accept+0x58/0x2d0 [rfcomm] [ 228.165378] [ 228.165378] other info that might help us debug this: [ 228.165378] Possible unsafe locking scenario: [ 228.165378] [ 228.165378] CPU0 [ 228.165378] ---- [ 228.165378] lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM); [ 228.165378] lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM); [ 228.165378] [ 228.165378] *** DEADLOCK *** [ 228.165378] [ 228.165378] May be due to missing lock nesting notation Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Avoid calling undefined smp_conn_security()Ben Hutchings2012-11-161-0/+2
| | | | | | | | | | | | | | Commit ff03261adc8b4bdd8291f1783c079b53a892b429 ('Bluetooth: Fix sending a HCI Authorization Request over LE links', commit d8343f125710fb596f7a88cd756679f14f4e77b9 upstream) added an call to smp_conn_security() from hci_conn_security(). The former is only defined if CONFIG_BT_L2CAP=y. This is not required in mainline since commit f1e91e1640d808d332498a6b09b2bcd01462eff9 ('Bluetooth: Always compile SCO and L2CAP in Bluetooth Core') removed that option. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: SMP: Fix setting unknown auth_req bitsJohan Hedberg2012-10-301-2/+4
| | | | | | | | | | | | | | | | commit 065a13e2cc665f6547dc7e8a9d6b6565badf940a upstream. When sending a pairing request or response we should not just blindly copy the value that the remote device sent. Instead we should at least make sure to mask out any unknown bits. This is particularly critical from the upcoming LE Secure Connections feature perspective as incorrectly indicating support for it (by copying the remote value) would cause a failure to pair with devices that support it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix sending a HCI Authorization Request over LE linksVinicius Costa Gomes2012-10-101-0/+4
| | | | | | | | | | | | | commit d8343f125710fb596f7a88cd756679f14f4e77b9 upstream. In the case that the link is already in the connected state and a Pairing request arrives from the mgmt interface, hci_conn_security() would be called but it was not considering LE links. Reported-by: João Paulo Rechi Vita <jprvita@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Change signature of smp_conn_security()Vinicius Costa Gomes2012-10-103-8/+9
| | | | | | | | | | | | | | commit cc110922da7e902b62d18641a370fec01a9fa794 upstream. To make it clear that it may be called from contexts that may not have any knowledge of L2CAP, we change the connection parameter, to receive a hci_conn. This also makes it clear that it is checking the security of the link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: L2CAP - Fix info leak via getsockname()Mathias Krause2012-09-191-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 792039c73cf176c8e39a6e8beef2c94ff46522ed ] The L2CAP code fails to initialize the l2_bdaddr_type member of struct sockaddr_l2 and the padding byte added for alignment. It that for leaks two bytes kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: RFCOMM - Fix info leak via getsockname()Mathias Krause2012-09-191-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 9344a972961d1a6d2c04d9008b13617bcb6ec2ef ] The RFCOMM code fails to initialize the trailing padding byte of struct sockaddr_rc added for alignment. It that for leaks one byte kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST)Mathias Krause2012-09-191-1/+1
| | | | | | | | | | | | | | | | | | | [ Upstream commit f9432c5ec8b1e9a09b9b0e5569e3c73db8de432a ] The RFCOMM code fails to initialize the two padding bytes of struct rfcomm_dev_list_req inserted for alignment before copying it to userland. Additionally there are two padding bytes in each instance of struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus dev_num times two bytes uninitialized kernel heap memory. Allocate the memory using kzalloc() to fix this issue. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY)Mathias Krause2012-09-191-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 9ad2de43f1aee7e7274a4e0d41465489299e344b ] The RFCOMM code fails to initialize the key_size member of struct bt_security before copying it to userland -- that for leaking one byte kernel stack. Initialize key_size with 0 to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: HCI - Fix info leak via getsockname()Mathias Krause2012-09-191-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 3f68ba07b1da811bf383b4b701b129bfcb2e4988 ] The HCI code fails to initialize the hci_channel member of struct sockaddr_hci and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize hci_channel with 0 to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER)Mathias Krause2012-09-191-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit e15ca9a0ef9a86f0477530b0f44a725d67f889ee ] The HCI code fails to initialize the two padding bytes of struct hci_ufilter before copying it to userland -- that for leaking two bytes kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix using uninitialized option in RFCModeSzymon Janc2012-09-121-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | commit 8f321f853ea33330c7141977cd34804476e2e07e upstream. If remote device sends bogus RFC option with invalid length, undefined options values are used. Fix this by using defaults when remote misbehaves. This also fixes the following warning reported by gcc 4.7.0: net/bluetooth/l2cap_core.c: In function 'l2cap_config_rsp': net/bluetooth/l2cap_core.c:3302:13: warning: 'rfc.max_pdu_size' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.max_pdu_size' was declared here net/bluetooth/l2cap_core.c:3298:25: warning: 'rfc.monitor_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.monitor_timeout' was declared here net/bluetooth/l2cap_core.c:3297:25: warning: 'rfc.retrans_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.retrans_timeout' was declared here net/bluetooth/l2cap_core.c:3295:2: warning: 'rfc.mode' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.mode' was declared here Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: Fix legacy pairing with some devicesSzymon Janc2012-09-122-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a9ea3ed9b71cc3271dd59e76f65748adcaa76422 upstream. Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> [bwh: Backported to 3.2: - Adjust context - hci_conn_ssp_enabled() is not defined; open-code the condition] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Bluetooth: hci_core: fix NULL-pointer dereference at unregisterJohan Hovold2012-04-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 94324962066231a938564bebad0f941cd2d06bb2 upstream. Make sure hci_dev_open returns immediately if hci_dev_unregister has been called. This fixes a race between hci_dev_open and hci_dev_unregister which can lead to a NULL-pointer dereference. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n /dev/ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close calls hci_dev_unregister and sleeps on req lock in hci_dev_do_close 5. hci_dev_open (1) releases req lock 6. hci_dev_do_close grabs req lock and returns as device is not up 7. hci_dev_unregister sleeps in destroy_workqueue 8. hci_dev_open (3) grabs req lock, calls hci_init_req and eventually sleeps 9. hci_dev_unregister finishes, while hci_dev_open is still running... [ 79.627136] INFO: trying to register non-static key. [ 79.632354] the code is fine but needs lockdep annotation. [ 79.638122] turning off the locking correctness validator. [ 79.643920] [<c00188bc>] (unwind_backtrace+0x0/0xf8) from [<c00729c4>] (__lock_acquire+0x1590/0x1ab0) [ 79.653594] [<c00729c4>] (__lock_acquire+0x1590/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128) [ 79.663085] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0040a88>] (run_timer_softirq+0x150/0x3ac) [ 79.672668] [<c0040a88>] (run_timer_softirq+0x150/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c) [ 79.682281] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94) [ 79.690856] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84) [ 79.699157] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) [ 79.708648] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60) [ 79.718048] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.723358] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.731933] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.740509] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.747497] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 79.756011] pgd = cf3b4000 [ 79.758850] [00000000] *pgd=8f0c7831, *pte=00000000, *ppte=00000000 [ 79.765502] Internal error: Oops: 80000007 [#1] [ 79.770294] Modules linked in: [ 79.773529] CPU: 0 Tainted: G W (3.3.0-rc6-00002-gb5d5c87 #421) [ 79.781066] PC is at 0x0 [ 79.783721] LR is at run_timer_softirq+0x16c/0x3ac [ 79.788787] pc : [<00000000>] lr : [<c0040aa4>] psr: 60000113 [ 79.788787] sp : cf281ee0 ip : 00000000 fp : cf280000 [ 79.800903] r10: 00000004 r9 : 00000100 r8 : b6f234d0 [ 79.806427] r7 : c0519c28 r6 : cf093488 r5 : c0561a00 r4 : 00000000 [ 79.813323] r3 : 00000000 r2 : c054eee0 r1 : 00000001 r0 : 00000000 [ 79.820190] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 79.827728] Control: 10c5387d Table: 8f3b4019 DAC: 00000015 [ 79.833801] Process gpsd (pid: 1265, stack limit = 0xcf2802e8) [ 79.839965] Stack: (0xcf281ee0 to 0xcf282000) [ 79.844573] 1ee0: 00000002 00000000 c0040a24 00000000 00000002 cf281f08 00200200 00000000 [ 79.853210] 1f00: 00000000 cf281f18 cf281f08 00000000 00000000 00000000 cf281f18 cf281f18 [ 79.861816] 1f20: 00000000 00000001 c056184c 00000000 00000001 b6f234d0 c0561848 00000004 [ 79.870452] 1f40: cf280000 c003a3b8 c051e79c 00000001 00000000 00000100 3fa9e7b8 0000000a [ 79.879089] 1f60: 00000025 cf280000 00000025 00000000 00000000 b6f234d0 00000000 00000004 [ 79.887756] 1f80: 00000000 c003a924 c053ad38 c0013a50 fa200000 cf281fb0 ffffffff c0008530 [ 79.896362] 1fa0: 0001e6a0 0000aab8 80000010 c037499c 0001e6a0 be8dab00 0001e698 00036698 [ 79.904998] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.913665] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff 00fbf700 04ffff00 [ 79.922302] [<c0040aa4>] (run_timer_softirq+0x16c/0x3ac) from [<c003a3b8>] (__do_softirq+0xd4/0x22c) [ 79.931945] [<c003a3b8>] (__do_softirq+0xd4/0x22c) from [<c003a924>] (irq_exit+0x8c/0x94) [ 79.940582] [<c003a924>] (irq_exit+0x8c/0x94) from [<c0013a50>] (handle_IRQ+0x34/0x84) [ 79.948913] [<c0013a50>] (handle_IRQ+0x34/0x84) from [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) [ 79.958404] [<c0008530>] (omap3_intc_handle_irq+0x48/0x4c) from [<c037499c>] (__irq_usr+0x3c/0x60) [ 79.967773] Exception stack(0xcf281fb0 to 0xcf281ff8) [ 79.973083] 1fa0: 0001e6a0 be8dab00 0001e698 00036698 [ 79.981658] 1fc0: 0002df98 0002df38 0000001f 00000000 b6f234d0 00000000 00000004 00000000 [ 79.990234] 1fe0: 0001e6f8 be8d6aa0 be8dac50 0000aab8 80000010 ffffffff [ 79.997161] Code: bad PC value [ 80.000396] ---[ end trace 6f6739840475f9ee ]--- [ 80.005279] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: Fix l2cap conn failures for ssp devicesPeter Hurley2012-04-131-0/+4
| | | | | | | | | | | | | | | | | | | | commit 18daf1644e634bae951a6e3d4d19d89170209762 upstream Commit 330605423c fixed l2cap conn establishment for non-ssp remote devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security is tested (which was always returning failure on any subsequent security checks). However, this broke l2cap conn establishment for ssp remote devices when an ACL link was already established at SDP-level security. This fix ensures that encryption must be pending whenever authentication is also pending. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Merge branch 'master' of ↵John W. Linville2012-01-041-1/+1
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"Gustavo F. Padovan2011-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | This reverts commit e1b6eb3ccb0c2a34302a9fd87dd15d7b86337f23. This was causing a delay of 10 seconds in the resume process of a Thinkpad laptop. I'm afraid this could affect more devices once 3.2 is released. Reported-by: Tomáš Janoušek <tomi@nomi.cz> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Merge branch 'master' of ↵John W. Linville2011-12-213-2/+13
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * Revert "Bluetooth: Revert: Fix L2CAP connection establishment"Gustavo F. Padovan2011-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | This reverts commit 4dff523a913197e3314c7b0d08734ab037709093. It was reported that this patch cause issues when trying to connect to legacy devices so reverting it. Reported-by: David Fries <david@fries.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Clear RFCOMM session timer when disconnecting last channelMat Martineau2011-12-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the last RFCOMM data channel is closed, a timer is normally set up to disconnect the control channel at a later time. If the control channel disconnect command is sent with the timer pending, the timer needs to be cancelled. If the timer is not cancelled in this situation, the reference counting logic for the RFCOMM session does not work correctly when the remote device closes the L2CAP connection. The session is freed at the wrong time, leading to a kernel panic. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Prevent uninitialized data access in L2CAP configurationMat Martineau2011-12-181-1/+11
| | | | | | | | | | | | | | | | | | | | | | When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Merge branch 'master' of ↵John W. Linville2011-12-093-8/+7
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * Bluetooth: Correct version check in hci_setupAndrei Emeltchenko2011-12-031-1/+1
| | | | | | | | | | | | | | | | Check for hci_ver instead of lmp_ver Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: bnep: Fix module referenceDavid Herrmann2011-11-211-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: cmtp: Fix module referenceDavid Herrmann2011-11-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Merge branch 'for-davem' of ↵David S. Miller2011-11-092-9/+9
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
| * Bluetooth: Use miliseconds for L2CAP channel timeoutsAndrzej Kaczmarek2011-11-071-8/+8
| | | | | | | | | | | | | | | | | | | | | | Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| * Bluetooth: Revert: Fix L2CAP connection establishmentArek Lichwa2011-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2011-11-073-5/+8
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
| * Merge branch 'master' of ↵John W. Linville2011-11-023-5/+8
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
| | * Bluetooth: Set HCI_MGMT flag only in read_controller_infoJohan Hedberg2011-10-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HCI_MGMT flag should only be set when user space requests the full controller information. This way we avoid potential issues with setting change events ariving before the actual read_controller_info command finishes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: Increase HCI reset timeout in hci_dev_do_closeSzymon Janc2011-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've noticed that my CSR usb dongle was not working if it was plugged in when PC was booting. It looks like I get two HCI reset command complete events (see hcidump logs below). The root cause is reset called from off_timer. Timeout for this reset to complete is set to 250ms and my bt dongle requires more time for replying with command complete event. After that, chip seems to reply with reset command complete event for next non-reset command. Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is already used for timeouting hci_reset_req in hci_dev_reset(). This might also be related to BT not working after suspend that was reported here some time ago. Hcidump log: 2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0 2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000 3) plen 0 2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00 01) plen 0 2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 1.1 (0x1) HCI Revision: 0x36f LMP Version: 1.1 (0x1) LMP Subversion: 0x36f Manufacturer: Cambridge Silicon Radio (10) Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
| | * Bluetooth: rfcomm: Fix sleep in invalid context in rfcomm_security_cfmSzymon Janc2011-10-141-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was triggered by turning off encryption on ACL link when rfcomm was using high security. rfcomm_security_cfm (which is called from rx task) was closing DLC and this involves sending disconnect message (and locking socket). Move closing DLC to rfcomm_process_dlcs and only flag DLC for closure in rfcomm_security_cfm. BUG: sleeping function called from invalid context at net/core/sock.c:2032 in_atomic(): 1, irqs_disabled(): 0, pid: 1788, name: kworker/0:3 [<c0068a08>] (unwind_backtrace+0x0/0x108) from [<c05e25dc>] (dump_stack+0x20/0x24) [<c05e25dc>] (dump_stack+0x20/0x24) from [<c0087ba8>] (__might_sleep+0x110/0x12c) [<c0087ba8>] (__might_sleep+0x110/0x12c) from [<c04801d8>] (lock_sock_nested+0x2c/0x64) [<c04801d8>] (lock_sock_nested+0x2c/0x64) from [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) from [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) from [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) from [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) from [<c056b168>] (rfcomm_send_disc+0x78/0x80) [<c056b168>] (rfcomm_send_disc+0x78/0x80) from [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) from [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) from [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) from [<c0550380>] (hci_rx_task+0x1d0/0x2d0) [<c0550380>] (hci_rx_task+0x1d0/0x2d0) from [<c009ee04>] (tasklet_action+0x138/0x1e4) [<c009ee04>] (tasklet_action+0x138/0x1e4) from [<c009f21c>] (__do_softirq+0xcc/0x274) [<c009f21c>] (__do_softirq+0xcc/0x274) from [<c009f6c0>] (do_softirq+0x60/0x6c) [<c009f6c0>] (do_softirq+0x60/0x6c) from [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) from [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040d470>] (data_from_chip+0xf4/0xaec) [<c040d470>] (data_from_chip+0xf4/0xaec) from [<c04136c0>] (send_skb_to_core+0x40/0x178) [<c04136c0>] (send_skb_to_core+0x40/0x178) from [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) from [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) from [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) from [<c00b2774>] (process_one_work+0x144/0x4b8) [<c00b2774>] (process_one_work+0x144/0x4b8) from [<c00b2e8c>] (worker_thread+0x198/0x468) [<c00b2e8c>] (worker_thread+0x198/0x468) from [<c00b9bc8>] (kthread+0x98/0xa0) [<c00b9bc8>] (kthread+0x98/0xa0) from [<c0061744>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | | net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | | net: Fix files explicitly needing to include module.hPaul Gortmaker2011-10-312-0/+2
|/ / | | | | | | | | | | | | | | | | With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2011-10-243-1/+11
|\ \
| * | bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore2011-10-183-1/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.1 at 2024-05-23 06:38:25 +0000