aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: Fix build failure when CONFIG_INET disabledBen Hutchings2015-10-131-1/+2
| | | | | | | | | | output_core.c, added in 3.2.66, is only needed and can only be compiled when CONFIG_INET is enabled. The condition in the Makefile is already correct upstream. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packetsBen Hutchings2015-01-011-1/+1
| | | | | | | | | | | | | | commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7 upstream. UFO is now disabled on all drivers that work with virtio net headers, but userland may try to send UFO/IPv6 packets anyway. Instead of sending with ID=0, we should select identifiers on their behalf (as we used to). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 916e4cf46d02 ("ipv6: reuse ip6_frag_id from ip6_ufo_append_data") Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: For 3.2, net/ipv6/output_core.c is a completely new file]
* [IPV6] MROUTE: Support multicast forwarding.YOSHIFUJI Hideaki2008-04-051-0/+2
| | | | | | | | Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [UDP]: Revert udplite and code split.David S. Miller2008-03-061-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit db1ed684f6c430c4cdad67d058688b8a1b5e607c ("[IPV6] UDP: Rename IPv6 UDP files."), commit 8be8af8fa4405652e6c0797db5465a4be8afb998 ("[IPV4] UDP: Move IPv4-specific bits to other file.") and commit e898d4db2749c6052072e9bc4448e396cbdeb06a ("[UDP]: Allow users to configure UDP-Lite."). First, udplite is of such small cost, and it is a core protocol just like TCP and normal UDP are. We spent enormous amounts of effort to make udplite share as much code with core UDP as possible. All of that work is less valuable if we're just going to slap a config option on udplite support. It is also causing build failures, as reported on linux-next, showing that the changeset was not tested very well. In fact, this is the second build failure resulting from the udplite change. Finally, the config options provided was a bool, instead of a modular option. Meaning the udplite code does not even get build tested by allmodconfig builds, and furthermore the user is not presented with a reasonable modular build option which is particularly needed by distribution vendors. Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] UDP: Rename IPv6 UDP files.YOSHIFUJI Hideaki2008-03-041-2/+2
| | | | | | | Rename net/ipv6/udp.c to net/ipv6/udp_ipv6.c Rename net/ipv6/udplite.c to net/ipv6/udplite_ipv6.c. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [UDP]: Allow users to configure UDP-Lite.YOSHIFUJI Hideaki2008-03-041-1/+2
| | | | | | | | | | | | | | | | Let's give users an option for disabling UDP-Lite (~4K). old: | text data bss dec hex filename | 286498 12432 6072 305002 4a76a net/ipv4/built-in.o | 193830 8192 3204 205226 321aa net/ipv6/ipv6.o new (without UDP-Lite): | text data bss dec hex filename | 284086 12136 5432 301654 49a56 net/ipv4/built-in.o | 191835 7832 3076 202743 317f7 net/ipv6/ipv6.o Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [TCP]: Add IPv6 support to TCP SYN cookiesGlenn Griffin2008-03-041-0/+1
| | | | | | | | | Updated to incorporate Eric's suggestion of using a per cpu buffer rather than allocating on the stack. Just a two line change, but will resend in it's entirety. Signed-off-by: Glenn Griffin <ggriffin.kernel@gmail.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6]: Make the ipv6/sysctl_net_ipv6.c compilation cleanerPavel Emelyanov2008-01-281-2/+2
| | | | | | | | | Since this file is entirely enclosed with the #ifdef CONFIG_SYSCTL/#endif pair, it's OK to move this CONFIG_ into a Makefile. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.YOSHIFUJI Hideaki2008-01-281-0/+1
| | | | | | | | Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] MIP6: Loadable module support for MIPv6.Masahide NAKAMURA2007-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes MIPv6 loadable module named "mip6". Here is a modprobe.conf(5) example to load it automatically when user application uses XFRM state for MIPv6: alias xfrm-type-10-43 mip6 alias xfrm-type-10-60 mip6 Some MIPv6 feature is not included by this modular, however, it should not be affected to other features like either IPsec or IPv6 with and without the patch. We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt separately for future work. Loadable features: * MH receiving check (to send ICMP error back) * RO header parsing and building (i.e. RH2 and HAO in DSTOPTS) * XFRM policy/state database handling for RO These are NOT covered as loadable: * Home Address flags and its rule on source address selection * XFRM sub policy (depends on its own kernel option) * XFRM functions to receive RO as IPv6 extension header * MH sending/receiving through raw socket if user application opens it (since raw socket allows to do so) * RH2 sending as ancillary data * RH2 operation with setsockopt(2) Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix Makefile thinko.David S. Miller2007-04-251-1/+1
| | | | | | obj-$(CONFIG_PROC_FS) --> ipv6-$(CONFIG_PROC_FS) Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Consolidate common SNMP codeHerbert Xu2007-04-251-1/+2
| | | | | | | | | | | | | | | This patch moves the non-proc SNMP code into addrconf.c and reuses IPv4 SNMP code where applicable. As a result we can skip proc.o if /proc is disabled. Note that I've made a number of functions static since they're only used by addrconf.c for now. If they ever get used elsewhere we can always remove the static. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Decentralize EXPORT_SYMBOLs.YOSHIFUJI Hideaki2007-04-251-1/+1
| | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem.YOSHIFUJI Hideaki2007-02-261-1/+1
| | | | | | | Link __ipv6_addr_type() statically for sunrpc code even if IPv6 is built as module. Signed-off-by: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
* [NET]: Supporting UDP-Lite (RFC 3828) in LinuxGerrit Renker2006-12-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Seperate sit driver to extra moduleJoerg Roedel2006-10-111-1/+2
| | | | | | | | | This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit) from the IPv6 module. It adds an option to Kconfig which makes it possible to compile it as a seperate module. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: BEET modeDiego Beltrami2006-10-041-0/+1
| | | | | | | | | | | | | | | | | This patch introduces the BEET mode (Bound End-to-End Tunnel) with as specified by the ietf draft at the following link: http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt The patch provides only single family support (i.e. inner family = outer family). Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com> Signed-off-by: Miika Komu <miika@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi> Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] MIP6: Add routing header type 2 transformation.Noriaki TAKAMIYA2006-09-221-0/+2
| | | | | | | | | | Add routing header type 2 transformation for Mobile IPv6. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM] STATE: Introduce route optimization mode.Masahide NAKAMURA2006-09-221-0/+1
| | | | | | | | | | | | | Route optimization is used with routing header and destination options header for Mobile IPv6. At outbound it makes header space like IPsec transport. At inbound it does nothing because exhdrs.c functions have responsibility to update skbuff information for these headers. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Policy Routing RulesThomas Graf2006-09-221-0/+1
| | | | | | | | Adds support for policy routing rules including a new local table for routes with a local destination. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] xfrm: Abstract out encapsulation modesHerbert Xu2006-06-171-0/+2
| | | | | | | | | | | | | | This patch adds the structure xfrm_mode. It is meant to represent the operations carried out by transport/tunnel modes. By doing this we allow additional encapsulation modes to be added without clogging up the xfrm_input/xfrm_output paths. Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and BEET modes. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET]: Introduce tunnel4/tunnel6Herbert Xu2006-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basically this patch moves the generic tunnel protocol stuff out of xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c and tunnel6 respectively. The reason for this is that the problem that Hugo uncovered is only the tip of the iceberg. The real problem is that when we removed the dependency of ipip on xfrm4_tunnel we didn't really consider the module case at all. For instance, as it is it's possible to build both ipip and xfrm4_tunnel as modules and if the latter is loaded then ipip simply won't load. After considering the alternatives I've decided that the best way out of this is to restore the dependency of ipip on the non-xfrm-specific part of xfrm4_tunnel. This is acceptable IMHO because the intention of the removal was really to be able to use ipip without the xfrm subsystem. This is still preserved by this patch. So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles the arbitration between the two. The order of processing is determined by a simple integer which ensures that ipip gets processed before xfrm4_tunnel. The situation for ICMP handling is a little bit more complicated since we may not have enough information to determine who it's for. It's not a big deal at the moment since the xfrm ICMP handlers are basically no-ops. In future we can deal with this when we look at ICMP caching in general. The user-visible change to this is the removal of the TUNNEL Kconfig prompts. This makes sense because it can only be used through IPCOMP as it stands. The addition of the new modules shouldn't introduce any problems since module dependency will cause them to be loaded. Oh and I also turned some unnecessary pskb's in IPv6 related to this patch to skb's. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix modular build with netfilter enabled.David S. Miller2006-01-101-1/+2
| | | | | | | | | Also, drop __exit marker from ipv6_netfilter_fini() as this can be invoked from inet6_init() error handling paths. Based upon a report from Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: net/ipv[46]/netfilter.c cleanupsPatrick McHardy2006-01-101-3/+2
| | | | | | | | Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few unneccessary includes. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Generalise tcp_v6_search_req & tcp_v6_synq_addArnaldo Carvalho de Melo2006-01-031-1/+2
| | | | | | | | | More work is needed tho to introduce inet6_request_sock from tcp6_request_sock, in the same layout considerations as ipv6_pinfo in inet_sock, next changeset will do that. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET6_HASHTABLES]: Move inet6_lookup functions to net/ipv6/inet6_hashtables.cArnaldo Carvalho de Melo2005-08-291-0/+2
| | | | | | | | | | | | Doing this we allow tcp_diag to support IPV6 even if tcp_diag is compiled statically and IPV6 is compiled as a module, removing the previous restriction while not building any IPV6 code if it is not selected. Now to work on the tcpdiag_register infrastructure and then to rename the whole thing to inetdiag, reflecting its by then completely generic nature. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Move ipv4 specific code from net/core/netfilter.c to ↵Harald Welte2005-08-291-1/+1
| | | | | | | | | | | net/ipv4/netfilter.c Netfilter cleanup - Move ipv4 code from net/core/netfilter.c to net/ipv4/netfilter.c - Move ipv6 netfilter code from net/ipv6/ip6_output.c to net/ipv6/netfilter.c Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Linux-2.6.12-rc2Linus Torvalds2005-04-161-0/+25
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.1 at 2024-05-13 09:49:58 +0000