aboutsummaryrefslogtreecommitdiffstats
path: root/net/sctp/output.c
Commit message (Collapse)AuthorAgeFilesLines
* merged more uncritical stuff from 3.2.72Wolfgang Wiedmeyer2015-10-231-4/+5
|
* sctp: Don't charge for data in sndbuf again when transmitting packetThomas Graf2012-10-131-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4c3a5bdae293f75cdf729c6c00124e8489af2276 ] SCTP charges wmem_alloc via sctp_set_owner_w() in sctp_sendmsg() and via skb_set_owner_w() in sctp_packet_transmit(). If a sender runs out of sndbuf it will sleep in sctp_wait_for_sndbuf() and expects to be waken up by __sctp_write_space(). Buffer space charged via sctp_set_owner_w() is released in sctp_wfree() which calls __sctp_write_space() directly. Buffer space charged via skb_set_owner_w() is released via sock_wfree() which calls sk->sk_write_space() _if_ SOCK_USE_WRITE_QUEUE is not set. sctp_endpoint_init() sets SOCK_USE_WRITE_QUEUE on all sockets. Therefore if sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. This could be fixed by clearing the SOCK_USE_WRITE_QUEUE flag but ... Charging for the data twice does not make sense in the first place, it leads to overcharging sndbuf by a factor 2. Therefore this patch only charges a single byte in wmem_alloc when transmitting an SCTP packet to ensure that the socket stays alive until the packet has been released. This means that control chunks are no longer accounted for in wmem_alloc which I believe is not a problem as skb->truesize will typically lead to overcharging anyway and thus compensates for any control overhead. Signed-off-by: Thomas Graf <tgraf@suug.ch> CC: Vlad Yasevich <vyasevic@redhat.com> CC: Neil Horman <nhorman@tuxdriver.com> CC: David Miller <davem@davemloft.net> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: check cached dst before using itNicolas Dichtel2012-06-101-3/+1
| | | | | | | | | | | | [ Upstream commit e0268868ba064980488fc8c194db3d8e9fb2959c ] dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: Do not account for sizeof(struct sk_buff) in estimated rwndThomas Graf2012-01-061-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a76c0adf60f6ca5ff3481992e4ea0383776b24d2 ] When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* net: sctp: fix checksum marking for outgoing packetsMichał Mirosław2011-07-141-11/+8
| | | | | | | | | | | | | | Packets to devices without NETIF_F_SCTP_CSUM (including NETIF_F_NO_CSUM) should be properly checksummed because the packets can be diverted or rerouted after construction. This still leaves packets diverted from NETIF_F_SCTP_CSUM-enabled devices with broken checksums. Fixing this needs implementing software offload fallback in networking core. For users of sctp_checksum_disable, skb->ip_summed should be left as CHECKSUM_NONE and not CHECKSUM_UNNECESSARY as per include/linux/skbuff.h. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* Merge branch 'master' of ↵David S. Miller2010-09-271-1/+0
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
| * sctp: Do not reset the packet during sctp_packet_config().Vlad Yasevich2010-09-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | sctp_packet_config() is called when getting the packet ready for appending of chunks. The function should not touch the current state, since it's possible to ping-pong between two transports when sending, and that can result packet corruption followed by skb overlfow crash. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/sctp: Use pr_fmt and pr_<level>Joe Perches2010-08-261-0/+2
|/ | | | | | | | | | | | Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to use do { print } while (0) guards. Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when lines were continued. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add a missing newline in "Failed bind hash alloc" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Tag messages that can be Nagle delayed at creation.Vlad Yasevich2010-04-301-1/+1
| | | | | | | | | | When we create the sctp_datamsg and fragment the user data, we know exactly if we are sending full segments or not and how they might be bundled. During this time, we can mark messages a Nagle capable or not. This makes the check at transmit time much simpler. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: remove 'resent' bit from the chunkVlad Yasevich2010-04-301-16/+9
| | | | | | | | | | | The 'resent' bit is used to make sure that we don't update rto estimate based on retransmitted chunks. However, we already have the 'rto_pending' bit that we test when need to update rto, so 'resent' bit is just extra. Additionally, we currently have a bug in that we always set a 'resent' bit and thus rto estimate is only updated by Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* sctp: Fix mis-ordering of user space data when multihoming in useNeil Horman2009-11-231-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently had a bug reported to me, in which the user was sending packets with a payload containing a sequence number. The packets were getting delivered in order according the chunk TSN values, but the sequence values in the payload were arriving out of order. At first I thought it must be an application error, but we eventually found it to be a problem on the transmit side in the sctp stack. The conditions for the error are that multihoming must be in use, and it helps if each transport has a different pmtu. The problem occurs in sctp_outq_flush. Basically we dequeue packets from the data queue, and attempt to append them to the orrered packet for a given transport. After we append a data chunk we add the trasport to the end of a list of transports to have their packets sent at the end of sctp_outq_flush. The problem occurs when a data chunks fills up a offered packet on a transport. The function that does the appending (sctp_packet_transmit_chunk), will try to call sctp_packet_transmit on the full packet, and then append the chunk to a new packet. This call to sctp_packet_transmit, sends that packet ahead of the others that may be queued in the transport_list in sctp_outq_flush. The result is that frames that were sent in one order from the user space sending application get re-ordered prior to tsn assignment in sctp_packet_transmit, resulting in mis-sequencing of data payloads, even though tsn ordering is correct. The fix is to change where we assign a tsn. By doing this earlier, we are then free to place chunks in packets, whatever way we see fit and the protocol will make sure to do all the appropriate re-ordering on receive as is needed. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: William Reich <reich@ulticom.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Update max.burst implementationVlad Yasevich2009-11-231-23/+0
| | | | | | | | | | | | | Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Remove useless last_time_used variableVlad Yasevich2009-11-231-2/+0
| | | | | | | | | | | | | | | The transport last_time_used variable is rather useless. It was only used when determining if CWND needs to be updated due to idle transport. However, idle transport detection was based on a Heartbeat timer and last_time_used was not incremented when sending Heartbeats. As a result the check for cwnd reduction was always true. We can get rid of the variable and just base our cwnd manipulation on the HB timer (like the code comment sais). We also have to call into the cwnd manipulation function regardless of whether HBs are enabled or not. That way we will detect idle transports if the user has disabled Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: remove dup code in net/sctp/output.cWei Yongjun2009-09-041-24/+13
| | | | | | | Use sctp_packet_reset() instead of dup code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Correctly track if AUTH has been bundled.Vlad Yasevich2009-09-041-1/+1
| | | | | | | | | We currently track if AUTH has been bundled using the 'auth' pointer to the chunk. However, AUTH is disallowed after DATA is already in the packet, so we need to instead use the 'has_auth' field. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: fix to reset packet information after packet transmitWei Yongjun2009-09-041-1/+12
| | | | | | | | | | The packet information does not reset after packet transmit, this may cause some problems such as following DATA chunk be sent without AUTH chunk, even if the authentication of DATA chunk has been requested by the peer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Don't do NAGLE delay on large writes that were fragmented smallVlad Yasevich2009-09-041-1/+3
| | | | | | | | | | | | | SCTP will delay the last part of a large write due to NAGLE, if that part is smaller then MTU. Since we are doing large writes, we might as well send the last portion now instead of waiting untill the next large write happens. The small portion will be sent as is regardless, so it's better to not delay it. This is a result of much discussions with Wei Yongjun <yjwei@cn.fujitsu.com> and Doug Graham <dgraham@nortel.com>. Many thanks go out to them. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Nagle delay should be based on path mtuVlad Yasevich2009-09-041-2/+3
| | | | | | | | | | | The decision to delay due to Nagle should be based on the path mtu and future packet size. We currently incorrectly base it on 'frag_point' which is the SCTP DATA segment size, and also we do not count DATA chunk header overhead in the computation. This actuall allows situations where a user can set low 'frag_point', and then send small messages without delay. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Generate SACKs when actually sending outbound DATAVlad Yasevich2009-09-041-57/+85
| | | | | | | | | | | | | | | We are now trying to bundle SACKs when we have outbound DATA to send. However, there are situations where this outbound DATA will not be sent (due to congestion or available window). In such cases it's ok to wait for the timer to expire. This patch refactors the sending code so that betfore attempting to bundle the SACK we check to see if the DATA will actually be transmitted. Based on eirlier works for Doug Graham <dgraham@nortel.com> and Wei Youngjun <yjwei@cn.fujitsu.com>. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: Fix piggybacked ACKsDoug Graham2009-09-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the conditions under which a SACK will be piggybacked on a DATA packet. The previous condition was incorrect due to a misinterpretation of RFC 4960 and/or RFC 2960. Specifically, the following paragraph from section 6.2 had not been implemented correctly: Before an endpoint transmits a DATA chunk, if any received DATA chunks have not been acknowledged (e.g., due to delayed ack), the sender should create a SACK and bundle it with the outbound DATA chunk, as long as the size of the final SCTP packet does not exceed the current MTU. See Section 6.2. When about to send a DATA chunk, the code now checks to see if the SACK timer is running. If it is, we know we have a SACK to send to the peer, so we append the SACK (assuming available space in the packet) and turn off the timer. For a simple request-response scenario, this will result in the SACK being bundled with the response, meaning the the SACK is received quickly by the client, and also meaning that no separate SACK packet needs to be sent by the server to acknowledge the request. Prior to this patch, a separate SACK packet would have been sent by the server SCTP only after its delayed-ACK timer had expired (usually 200ms). This is wasteful of bandwidth, and can also have a major negative impact on performance due the interaction of delayed ACKs with the Nagle algorithm. Signed-off-by: Doug Graham <dgraham@nortel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: xmit sctp packet always return no route errorWei Yongjun2009-06-291-1/+1
| | | | | | | | | | | Commit 'net: skb->dst accessors'(adf30907d63893e4208dfe3f5c88ae12bc2f25d5) broken the sctp protocol stack, the sctp packet can never be sent out after Eric Dumazet's patch, which have typo in the sctp code. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Vlad Yasevich <vladisalv.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: skb->dst accessorsEric Dumazet2009-06-031-3/+3
| | | | | | | | | | | | | | | | | | Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: add feature bit for SCTP offload in hardwareJesse Brandeburg2009-04-281-3/+14
| | | | | | | | | | | | | | this is the sctp code to enable hardware crc32c offload for adapters that support it. Originally by: Vlad Yasevich <vladislav.yasevich@hp.com> modified by Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Clean up TEST_FRAME hacks.Vlad Yasevich2009-03-211-4/+1
| | | | | | | | Remove 2 TEST_FRAME hacks that are no longer needed. These allowed sctp regression tests to compile before, but are no longer needed. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Clean up sctp checksumming codeVlad Yasevich2009-02-161-8/+6
| | | | | | | | | | | The sctp crc32c checksum is always generated in little endian. So, we clean up the code to treat it as little endian and remove all the __force casts. Suggested by Herbert Xu. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Allow to disable SCTP checksums via module parameterLucas Nussbaum2009-02-161-1/+1
| | | | | | | | | | | | | | | | | | | | | This is a new version of my patch, now using a module parameter instead of a sysctl, so that the option is harder to find. Please note that, once the module is loaded, it is still possible to change the value of the parameter in /sys/module/sctp/parameters/, which is useful if you want to do performance comparisons without rebooting. Computation of SCTP checksums significantly affects the performance of SCTP. For example, using two dual-Opteron 246 connected using a Gbe network, it was not possible to achieve more than ~730 Mbps, compared to 941 Mbps after disabling SCTP checksums. Unfortunately, SCTP checksum offloading in NICs is not commonly available (yet). By default, checksums are still enabled, of course. Signed-off-by: Lucas Nussbaum <lucas.nussbaum@ens-lyon.fr> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace uses of __constant_{endian}Harvey Harrison2009-02-011-1/+1
| | | | | | | Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Properly timestamp outgoing data chunks for rtx purposesVlad Yasevich2009-01-221-3/+4
| | | | | | | | | | | | | | | | | | | Recent changes to the retransmit code exposed a long standing bug where it was possible for a chunk to be time stamped after the retransmit timer was reset. This caused a rare situation where the retrnamist timer has expired, but nothing was marked for retrnasmission because all of timesamps on data were less then 1 rto ago. As result, the timer was never restarted since nothing was retransmitted, and this resulted in a hung association that did couldn't complete the data transfer. The solution is to timestamp the chunk when it's added to the packet for transmission purposes. After the packet is trsnmitted the rtx timer is restarted. This guarantees that when the timer expires, there will be data to retransmit. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: reduce memory footprint of sctp_chunk structureNeil Horman2008-10-011-1/+1
| | | | | | | | | sctp_chunks should be put on a diet. This is some of the low hanging fruit that we can strip out. Changes all the __s8/__u8 flags to bitfields. Saves 12 bytes per chunk. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* sctp: set the skb->ip_summed correctly when sending over loopback.Vlad Yasevich2008-09-181-1/+2
| | | | | | | | | | Loopback used to clobber the ip_summed filed which sctp then used to figure out if it needed to do checksumming or not. Now that loopback doesn't do that any more, sctp needs to set the ip_summed field correctly. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Drop ipfargok in sctp_xmit functionHerbert Xu2008-08-031-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ipfragok flag controls whether the packet may be fragmented either on the local host on beyond. The latter is only valid on IPv4. In fact, we never want to do the latter even on IPv4 when PMTU is enabled. This is because even though we can't fragment packets within SCTP due to the prtocol's inherent faults, we can still fragment it at IP layer. By setting the DF bit we will improve the PMTU process. RFC 2960 only says that we SHOULD clear the DF bit in this case, so we're compliant even if we set the DF bit. In fact RFC 4960 no longer has this statement. Once we make this change, we only need to control the local fragmentation. There is already a bit in the skb which controls that, local_df. So this patch sets that instead of using the ipfragok argument. The only complication is that there isn't a struct sock object per transport, so for IPv4 we have to resort to changing the pmtudisc field for every packet. This should be safe though as the protocol is single-threaded. Note that after this patch we can remove ipfragok from the rest of the stack too. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: remove unnecessary byteshifting, calculate directly in big-endianHarvey Harrison2008-07-181-2/+2
| | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mib: add net to IP_INC_STATS_BHPavel Emelyanov2008-07-161-1/+2
| | | | | Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Follow security requirement of responding with 1 packetVlad Yasevich2008-06-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | RFC 4960, Section 11.4. Protection of Non-SCTP-Capable Hosts When an SCTP stack receives a packet containing multiple control or DATA chunks and the processing of the packet requires the sending of multiple chunks in response, the sender of the response chunk(s) MUST NOT send more than one packet. If bundling is supported, multiple response chunks that fit into a single packet MAY be bundled together into one single response packet. If bundling is not supported, then the sender MUST NOT send more than one response chunk and MUST discard all other responses. Note that this rule does NOT apply to a SACK chunk, since a SACK chunk is, in itself, a response to DATA and a SACK does not require a response of more DATA. We implement this by not servicing our outqueue until we reach the end of the packet. This enables maximum bundling. We also identify 'response' chunks and make sure that we only send 1 packet when sending such chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: Fix ECN markings for IPv6Vlad Yasevich2008-06-041-1/+1
| | | | | | | | | | | Commit e9df2e8fd8fbc95c57dbd1d33dada66c4627b44c ("[IPV6]: Use appropriate sock tclass setting for routing lookup.") also changed the way that ECN capable transports mark this capability in IPv6. As a result, SCTP was not marking ECN capablity because the traffic class was never set. This patch brings back the markings for IPv6 traffic. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-03-051-7/+7
| | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Stop claiming that this is a "reference implementation"Vlad Yasevich2008-02-051-4/+4
| | | | | | | | | | | I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
* [SCTP]: Use crc32c library for checksum calculations.Vlad Yasevich2008-01-281-0/+1
| | | | | | | | | | The crc32c library used an identical table and algorithm as SCTP. Switch to using the library instead of carrying our own table. Using crypto layer proved to have too much overhead compared to using the library directly. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Enable the sending of the AUTH chunk.Vlad Yasevich2007-10-101-27/+104
| | | | | | | | | | | | | | | | | | | | | SCTP-AUTH, Section 6.2: Endpoints MUST send all requested chunks authenticated where this has been requested by the peer. The other chunks MAY be sent authenticated or not. If endpoint pair shared keys are used, one of them MUST be selected for authentication. To send chunks in an authenticated way, the sender MUST include these chunks after an AUTH chunk. This means that a sender MUST bundle chunks in order to authenticate them. If the endpoint has no endpoint pair shared key for the peer, it MUST use Shared Key Identifier 0 with an empty endpoint pair shared key. If there are multiple endpoint shared keys the sender selects one and uses the corresponding Shared Key Identifier Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Implement SCTP-AUTH initializations.Vlad Yasevich2007-10-101-0/+4
| | | | | | | | The patch initializes AUTH related members of the generic SCTP structures and provides a way to enable/disable auth extension. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: cleanup extra semicolonsStephen Hemminger2007-04-251-1/+1
| | | | | | | | | | | Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] SCTP: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-101-6/+6
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Include sk_buff overhead while updating the peer's receive window.Sridhar Samudrala2006-09-291-2/+8
| | | | | | | | | | | Currently if the sender is sending small messages, it can cause a receiver to run out of receive buffer space even when the advertised receive window is still open and results in packet drops and retransmissions. Including a overhead while updating the sender's view of peer receive window will reduce the chances of receive buffer space overshooting the receive window. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Don't do CRC32C checksum over loopback.Sridhar Samudrala2006-06-171-21/+27
| | | | | Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Fix 'fast retransmit' to send a TSN only once.Vlad Yasevich2006-02-021-1/+1
| | | | | | | | | | | | SCTP used to "fast retransmit" a TSN every time we hit the number of missing reports for the TSN. However the Implementers Guide specifies that we should only "fast retransmit" a given TSN once. Subsequent retransmits should be timeouts only. Also change the number of missing reports to 3 as per the latest IG(similar to TCP). Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Update SCTP_PEER_ADDR_PARAMS socket option to the latest api draft.Frank Filz2006-01-031-6/+11
| | | | | | | | | | This patch adds support to set/get heartbeat interval, maximum number of retransmissions, pathmtu, sackdelay time for a particular transport/ association/socket as per the latest SCTP sockets api draft11. Signed-off-by: Frank Filz <ffilz@us.ibm.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP]: Use struct list_head for chunk lists, not sk_buff_head.David S. Miller2005-07-081-9/+13
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in ↵Sridhar Samudrala2005-04-281-2/+2
| | | | | | | sctp_packet_transmit(). Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.1 at 2024-05-10 11:18:40 +0000