aboutsummaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: update ip6_rt_last_gc every time GC is runMichal Kubeček2015-10-132-4/+6
| | | | | | | | | | | | | | commit 49a18d86f66d33a20144ecb5a34bba0d1856b260 upstream. As pointed out by Eric Dumazet, net->ipv6.ip6_rt_last_gc should hold the last time garbage collector was run so that we should update it whenever fib6_run_gc() calls fib6_clean_all(), not only if we got there from ip6_dst_gc(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
* ipv6: prevent fib6_run_gc() contentionMichal Kubeček2015-10-133-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2ac3ac8f86f2fe065d746d9a9abaca867adec577 upstream. On a high-traffic router with many processors and many IPv6 dst entries, soft lockup in fib6_run_gc() can occur when number of entries reaches gc_thresh. This happens because fib6_run_gc() uses fib6_gc_lock to allow only one thread to run the garbage collector but ip6_dst_gc() doesn't update net->ipv6.ip6_rt_last_gc until fib6_run_gc() returns. On a system with many entries, this can take some time so that in the meantime, other threads pass the tests in ip6_dst_gc() (ip6_rt_last_gc is still not updated) and wait for the lock. They then have to run the garbage collector one after another which blocks them for quite long. Resolve this by replacing special value ~0UL of expire parameter to fib6_run_gc() by explicit "force" parameter to choose between spin_lock_bh() and spin_trylock_bh() and call fib6_run_gc() with force=false if gc_thresh is reached but not max_size. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
* fib_rules: fix fib rule dumps across multiple skbsWilson Kok2015-10-131-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 41fc014332d91ee90c32840bf161f9685b7fbf2b ] dump_rules returns skb length and not error. But when family == AF_UNSPEC, the caller of dump_rules assumes that it returns an error. Hence, when family == AF_UNSPEC, we continue trying to dump on -EMSGSIZE errors resulting in incorrect dump idx carried between skbs belonging to the same dump. This results in fib rule dump always only dumping rules that fit into the first skb. This patch fixes dump_rules to return error so that we exit correctly and idx is correctly maintained between skbs that are part of the same dump. Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - s/portid/pid/ - Check whether fib_nl_fill_rule() returns < 0, as it may return > 0 on success (thanks to Roland Dreier)] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Roland Dreier <roland@purestorage.com>
* net/ipv6: Correct PIM6 mrt_lock handlingRichard Laing2015-10-131-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit 25b4a44c19c83d98e8c0807a7ede07c1f28eab8b ] In the IPv6 multicast routing code the mrt_lock was not being released correctly in the MFC iterator, as a result adding or deleting a MIF would cause a hang because the mrt_lock could not be acquired. This fix is a copy of the code for the IPv4 case and ensures that the lock is released correctly. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipv6: lock socket in ip6_datagram_connect()Eric Dumazet2015-10-132-9/+27
| | | | | | | | | | | | | | | | [ Upstream commit 03645a11a570d52e70631838cb786eb4253eb463 ] ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: Fix skb csum races when peekingHerbert Xu2015-10-131-1/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ] When we calculate the checksum on the recv path, we store the result in the skb as an optimisation in case we need the checksum again down the line. This is in fact bogus for the MSG_PEEK case as this is done without any locking. So multiple threads can peek and then store the result to the same skb, potentially resulting in bogus skb states. This patch fixes this by only storing the result if the skb is not shared. This preserves the optimisations for the few cases where it can be done safely due to locking or other reasons, e.g., SIOCINQ. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()Oleg Nesterov2015-10-131-1/+3
| | | | | | | | | | | | | [ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ] pktgen_thread_worker() is obviously racy, kthread_stop() can come between the kthread_should_stop() check and set_current_state(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net/tipc: initialize security state for new connection socketStephen Smalley2015-10-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fdd75ea8df370f206a8163786e7470c1277a5064 ] Calling connect() with an AF_TIPC socket would trigger a series of error messages from SELinux along the lines of: SELinux: Invalid class 0 type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> } for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable> permissive=0 This was due to a failure to initialize the security state of the new connection sock by the tipc code, leaving it with junk in the security class field and an unlabeled secid. Add a call to security_sk_clone() to inherit the security state from the parent socket. Reported-by: Tim Shearer <tim.shearer@overturenetworks.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* RDS: verify the underlying transport exists before creating a connectionSasha Levin2015-10-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 74e98eb085889b0d2d4908f59f6e00026063014f upstream. There was no verification that an underlying transport exists when creating a connection, this would cause dereferencing a NULL ptr. It might happen on sockets that weren't properly bound before attempting to send a message, which will cause a NULL ptr deref: [135546.047719] kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [135546.051270] Modules linked in: [135546.051781] CPU: 4 PID: 15650 Comm: trinity-c4 Not tainted 4.2.0-next-20150902-sasha-00041-gbaa1222-dirty #2527 [135546.053217] task: ffff8800835bc000 ti: ffff8800bc708000 task.ti: ffff8800bc708000 [135546.054291] RIP: __rds_conn_create (net/rds/connection.c:194) [135546.055666] RSP: 0018:ffff8800bc70fab0 EFLAGS: 00010202 [135546.056457] RAX: dffffc0000000000 RBX: 0000000000000f2c RCX: ffff8800835bc000 [135546.057494] RDX: 0000000000000007 RSI: ffff8800835bccd8 RDI: 0000000000000038 [135546.058530] RBP: ffff8800bc70fb18 R08: 0000000000000001 R09: 0000000000000000 [135546.059556] R10: ffffed014d7a3a23 R11: ffffed014d7a3a21 R12: 0000000000000000 [135546.060614] R13: 0000000000000001 R14: ffff8801ec3d0000 R15: 0000000000000000 [135546.061668] FS: 00007faad4ffb700(0000) GS:ffff880252000000(0000) knlGS:0000000000000000 [135546.062836] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [135546.063682] CR2: 000000000000846a CR3: 000000009d137000 CR4: 00000000000006a0 [135546.064723] Stack: [135546.065048] ffffffffafe2055c ffffffffafe23fc1 ffffed00493097bf ffff8801ec3d0008 [135546.066247] 0000000000000000 00000000000000d0 0000000000000000 ac194a24c0586342 [135546.067438] 1ffff100178e1f78 ffff880320581b00 ffff8800bc70fdd0 ffff880320581b00 [135546.068629] Call Trace: [135546.069028] ? __rds_conn_create (include/linux/rcupdate.h:856 net/rds/connection.c:134) [135546.069989] ? rds_message_copy_from_user (net/rds/message.c:298) [135546.071021] rds_conn_create_outgoing (net/rds/connection.c:278) [135546.071981] rds_sendmsg (net/rds/send.c:1058) [135546.072858] ? perf_trace_lock (include/trace/events/lock.h:38) [135546.073744] ? lockdep_init (kernel/locking/lockdep.c:3298) [135546.074577] ? rds_send_drop_to (net/rds/send.c:976) [135546.075508] ? __might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3795) [135546.076349] ? __might_fault (mm/memory.c:3795) [135546.077179] ? rds_send_drop_to (net/rds/send.c:976) [135546.078114] sock_sendmsg (net/socket.c:611 net/socket.c:620) [135546.078856] SYSC_sendto (net/socket.c:1657) [135546.079596] ? SYSC_connect (net/socket.c:1628) [135546.080510] ? trace_dump_stack (kernel/trace/trace.c:1926) [135546.081397] ? ring_buffer_unlock_commit (kernel/trace/ring_buffer.c:2479 kernel/trace/ring_buffer.c:2558 kernel/trace/ring_buffer.c:2674) [135546.082390] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749) [135546.083410] ? trace_event_raw_event_sys_enter (include/trace/events/syscalls.h:16) [135546.084481] ? do_audit_syscall_entry (include/trace/events/syscalls.h:16) [135546.085438] ? trace_buffer_unlock_commit (kernel/trace/trace.c:1749) [135546.085515] rds_ib_laddr_check(): addr 36.74.25.172 ret -99 node type -1 Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipv6: addrconf: validate new MTU before applying itMarcelo Leitner2015-10-131-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | commit 77751427a1ff25b27d47a4c36b12c3c8667855ac upstream. Currently we don't check if the new MTU is valid or not and this allows one to configure a smaller than minimum allowed by RFCs or even bigger than interface own MTU, which is a problem as it may lead to packet drops. If you have a daemon like NetworkManager running, this may be exploited by remote attackers by forging RA packets with an invalid MTU, possibly leading to a DoS. (NetworkManager currently only validates for values too small, but not for too big ones.) The fix is just to make sure the new value is valid. That is, between IPV6_MIN_MTU and interface's MTU. Note that similar check is already performed at ndisc_router_discovery(), for when kernel itself parses the RA. Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* SUNRPC: xs_reset_transport must mark the connection as disconnectedTrond Myklebust2015-10-131-0/+2
| | | | | | | | | | commit 0c78789e3a030615c6650fde89546cadf40ec2cc upstream. In case the reconnection attempt fails. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.2: add local variable xprt] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mac80211: enable assoc check for mesh interfacesBob Copeland2015-10-131-3/+0
| | | | | | | | | | | | | | | | | | | | commit 3633ebebab2bbe88124388b7620442315c968e8f upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by: Alexis Green <agreen@cococorp.com> Tested-by: Jesse Jones <jjones@cococorp.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE statelucien2015-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit f648f807f61e64d247d26611e34cc97e4ed03401 upstream. Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not resetting the association overall_error_count. This allowed the association to better enforce assoc.max_retrans limit. However, the same issue still exists when the association is in SHUTDOWN_RECEIVED state. In this state, HB-ACKs will continue to reset the overall_error_count for the association would extend the lifetime of association unnecessarily. This patch solves this by resetting the overall_error_count whenever the current state is small then SCTP_STATE_SHUTDOWN_PENDING. As a small side-effect, we end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT states, but they are not really impacted because we disable Heartbeats in those states. Fixes: Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: Fix RCU splat in af_keyDavid Ahern2015-10-131-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ba51b6be38c122f7dab40965b4397aaf6188a464 upstream. Hit the following splat testing VRF change for ipsec: [ 113.475692] =============================== [ 113.476194] [ INFO: suspicious RCU usage. ] [ 113.476667] 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED Not tainted [ 113.477545] ------------------------------- [ 113.478013] /work/monster-14/dsa/kernel.git/include/linux/rcupdate.h:568 Illegal context switch in RCU read-side critical section! [ 113.479288] [ 113.479288] other info that might help us debug this: [ 113.479288] [ 113.480207] [ 113.480207] rcu_scheduler_active = 1, debug_locks = 1 [ 113.480931] 2 locks held by setkey/6829: [ 113.481371] #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff814e9887>] pfkey_sendmsg+0xfb/0x213 [ 113.482509] #1: (rcu_read_lock){......}, at: [<ffffffff814e767f>] rcu_read_lock+0x0/0x6e [ 113.483509] [ 113.483509] stack backtrace: [ 113.484041] CPU: 0 PID: 6829 Comm: setkey Not tainted 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED [ 113.485422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 113.486845] 0000000000000001 ffff88001d4c7a98 ffffffff81518af2 ffffffff81086962 [ 113.487732] ffff88001d538480 ffff88001d4c7ac8 ffffffff8107ae75 ffffffff8180a154 [ 113.488628] 0000000000000b30 0000000000000000 00000000000000d0 ffff88001d4c7ad8 [ 113.489525] Call Trace: [ 113.489813] [<ffffffff81518af2>] dump_stack+0x4c/0x65 [ 113.490389] [<ffffffff81086962>] ? console_unlock+0x3d6/0x405 [ 113.491039] [<ffffffff8107ae75>] lockdep_rcu_suspicious+0xfa/0x103 [ 113.491735] [<ffffffff81064032>] rcu_preempt_sleep_check+0x45/0x47 [ 113.492442] [<ffffffff8106404d>] ___might_sleep+0x19/0x1c8 [ 113.493077] [<ffffffff81064268>] __might_sleep+0x6c/0x82 [ 113.493681] [<ffffffff81133190>] cache_alloc_debugcheck_before.isra.50+0x1d/0x24 [ 113.494508] [<ffffffff81134876>] kmem_cache_alloc+0x31/0x18f [ 113.495149] [<ffffffff814012b5>] skb_clone+0x64/0x80 [ 113.495712] [<ffffffff814e6f71>] pfkey_broadcast_one+0x3d/0xff [ 113.496380] [<ffffffff814e7b84>] pfkey_broadcast+0xb5/0x11e [ 113.497024] [<ffffffff814e82d1>] pfkey_register+0x191/0x1b1 [ 113.497653] [<ffffffff814e9770>] pfkey_process+0x162/0x17e [ 113.498274] [<ffffffff814e9895>] pfkey_sendmsg+0x109/0x213 In pfkey_sendmsg the net mutex is taken and then pfkey_broadcast takes the RCU lock. Since pfkey_broadcast takes the RCU lock the allocation argument is pointless since GFP_ATOMIC must be used between the rcu_read_{,un}lock. The one call outside of rcu can be done with GFP_KERNEL. Fixes: 7f6b9dbd5afbd ("af_key: locking change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: Fix skb_set_peeked use-after-free bugHerbert Xu2015-10-131-6/+7
| | | | | | | | | | | | | | | | | | | | | commit a0a2a6602496a45ae838a96db8b8173794b5d398 upstream. The commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ("net: Clone skb before setting peeked flag") introduced a use-after-free bug in skb_recv_datagram. This is because skb_set_peeked may create a new skb and free the existing one. As it stands the caller will continue to use the old freed skb. This patch fixes it by making skb_set_peeked return the new skb (or the old one if unchanged). Fixes: 738ac1ebb96d ("net: Clone skb before setting peeked flag") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Brenden Blanco <bblanco@plumgrid.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: Clone skb before setting peeked flagHerbert Xu2015-10-131-4/+38
| | | | | | | | | | | | | | | | | | | | | | commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec upstream. Shared skbs must not be modified and this is crucial for broadcast and/or multicast paths where we use it as an optimisation to avoid unnecessary cloning. The function skb_recv_datagram breaks this rule by setting peeked without cloning the skb first. This causes funky races which leads to double-free. This patch fixes this by cloning the skb and replacing the skb in the list when setting skb->peeked. Fixes: a59322be07c9 ("[UDP]: Only increment counter on first peek/recv") Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rds: fix an integer overflow test in rds_info_getsockopt()Dan Carpenter2015-10-131-1/+1
| | | | | | | | | | | | | | | | | commit 468b732b6f76b138c0926eadf38ac88467dcd271 upstream. "len" is a signed integer. We check that len is not negative, so it goes from zero to INT_MAX. PAGE_SIZE is unsigned long so the comparison is type promoted to unsigned long. ULONG_MAX - 4095 is a higher than INT_MAX so the condition can never be true. I don't know if this is harmful but it seems safe to limit "len" to INT_MAX - 4095. Fixes: a8c879a7ee98 ('RDS: Info and stats') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* pktgen: Require CONFIG_INET due to use of IPv4 checksum functionThomas Graf2015-10-131-1/+1
| | | | | | | | | | | | commit ffd756b3174e496cf6f3c5458c434e31d2cd48b0 upstream. Unlike for IPv6, the IPv4 checksum functions are only available if CONFIG_INET is set. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipv6: Fix build failure when CONFIG_INET disabledBen Hutchings2015-10-131-1/+2
| | | | | | | | | | output_core.c, added in 3.2.66, is only needed and can only be compiled when CONFIG_INET is enabled. The condition in the Makefile is already correct upstream. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* netfilter: nf_conntrack: Support expectations in different zonesJoe Stringer2015-08-121-1/+2
| | | | | | | | | | | | | | | commit 4b31814d20cbe5cd4ccf18089751e77a04afe4f2 upstream. When zones were originally introduced, the expectation functions were all extended to perform lookup using the zone. However, insertion was not modified to check the zone. This means that two expectations which are intended to apply for different connections that have the same tuple but exist in different zones cannot both be tracked. Fixes: 5d0aa2ccd4 (netfilter: nf_conntrack: add support for "conntrack zones") Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* inet: frags: fix defragmented packet's IP header for af_packetEdward Hyunkoo Jee2015-08-121-2/+4
| | | | | | | | | | | | | | | | | | | | | commit 0848f6428ba3a2e42db124d41ac6f548655735bf upstream. When ip_frag_queue() computes positions, it assumes that the passed sk_buff does not contain L2 headers. However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly functions can be called on outgoing packets that contain L2 headers. Also, IPv4 checksum is not corrected after reassembly. Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.") Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mac80211: clear subdir_stations when removing debugfsTom Hughes2015-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | commit 4479004e6409087d1b4986881dc98c6c15dffb28 upstream. If we don't do this, and we then fail to recreate the debugfs directory during a mode change, then we will fail later trying to add stations to this now bogus directory: BUG: unable to handle kernel NULL pointer dereference at 0000006c IP: [<c0a92202>] mutex_lock+0x12/0x30 Call Trace: [<c0678ab4>] start_creating+0x44/0xc0 [<c0679203>] debugfs_create_dir+0x13/0xf0 [<f8a938ae>] ieee80211_sta_debugfs_add+0x6e/0x490 [mac80211] Signed-off-by: Tom Hughes <tom@compton.nu> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* datagram: Factor out sk queue referencingPavel Emelyanov2015-08-121-4/+5
| | | | | | | | | | | | commit 4934b0329f7150dcb5f90506860e2db32274c755 upstream. This makes lines shorter and simplifies further patching. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Prerequisite of "net: Clone skb before setting peeked flag"] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rds: rds_ib_device.refcount overflowWengang Wang2015-08-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4fabb59449aa44a585b3603ffdadd4c5f4d0c033 upstream. Fixes: 3e0249f9c05c ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: call rcu_read_lock early in process_backlogJulian Anastasov2015-08-121-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 upstream. Incoming packet should be either in backlog queue or in RCU read-side section. Otherwise, the final sequence of flush_backlog() and synchronize_net() may miss packets that can run without device reference: CPU 1 CPU 2 skb->dev: no reference process_backlog:__skb_dequeue process_backlog:local_irq_enable on_each_cpu for flush_backlog => IPI(hardirq): flush_backlog - packet not found in backlog CPU delayed ... synchronize_net - no ongoing RCU read-side sections netdev_run_todo, rcu_barrier: no ongoing callbacks __netif_receive_skb_core:rcu_read_lock - too late free dev process packet for freed dev Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Adjust context - No need to rename the label in __netif_receive_skb()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: do not process device backlog during unregistrationJulian Anastasov2015-08-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 upstream. commit 381c759d9916 ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtnetlink: verify IFLA_VF_INFO attributes before passing them to driverDaniel Borkmann2015-08-121-54/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4f7d2cdfdde71ffe962399b7020c674050329423 upstream. Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Drop unsupported attributes - Use ndo_set_vf_tx_rate operation, not ndo_set_vf_rate] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* 9p: forgetting to cancel request on interrupted zero-copy RPCAl Viro2015-08-121-1/+2
| | | | | | | | | | | | | commit a84b69cb6e0a41e86bc593904faa6def3b957343 upstream. If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* netfilter: bridge: don't leak skb in error pathsFlorian Westphal2015-08-121-1/+4
| | | | | | | | | | | | | | | | commit dd302b59bde0149c20df7278c0d36c765e66afbd upstream. br_nf_dev_queue_xmit must free skb in its error path. NF_DROP is misleading -- its an okfn, not a netfilter hook. Fixes: 462fb2af9788a ("bridge : Sanitize skb before it enters the IP stack") Fixes: efb6de9b4ba00 ("netfilter: bridge: forward IPv6 fragmented packets") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.2: - Adjust filename - Drop IPv6 changes] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* crush: fix a bug in tree bucket decodeIlya Dryomov2015-08-121-1/+1
| | | | | | | | | | | | | | | | commit 82cd003a77173c91b9acad8033fb7931dac8d751 upstream. struct crush_bucket_tree::num_nodes is u8, so ceph_decode_8_safe() should be used. -Wconversion catches this, but I guess it went unnoticed in all the noise it spews. The actual problem (at least for common crushmaps) isn't the u32 -> u8 truncation though - it's the advancement by 4 bytes instead of 1 in the crushmap buffer. Fixes: http://tracker.ceph.com/issues/2759 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* bridge: multicast: restore router configuration on port link down/upSatish Ashok2015-08-121-0/+5
| | | | | | | | | | | | | | | commit 754bc547f0a79f7568b5b81c7fc0a8d044a6571a upstream. When a port goes through a link down/up the multicast router configuration is not restored. Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 0909e11758bd ("bridge: Add multicast_router sysfs entries") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* NET: ROSE: Don't dereference NULL neighbour pointer.Ralf Baechle2015-08-121-1/+2
| | | | | | | | | | | | commit d496f7842aada20c61e6044b3395383fa972872c upstream. A ROSE socket doesn't necessarily always have a neighbour pointer so check if the neighbour pointer is valid before dereferencing it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* SUNRPC: Fix a memory leak in the backchannel codeTrond Myklebust2015-08-121-1/+1
| | | | | | | | | | | | commit 88de6af24f2b48b06c514d3c3d0a8f22fafe30bd upstream. req->rq_private_buf isn't initialised when xprt_setup_backchannel calls xprt_free_allocation. Fixes: fb7a0b9addbdb ("nfs41: New backchannel helper routines") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* pktgen: adjust spacing in proc file interface outputJesper Dangaard Brouer2015-08-121-1/+1
| | | | | | | | | | | | commit d079abd181950a44cdf31daafd1662388a6c4d2e upstream. Too many spaces were introduced in commit 63adc6fb8ac0 ("pktgen: cleanup checkpatch warnings"), thus misaligning "src_min:" to other columns. Fixes: 63adc6fb8ac0 ("pktgen: cleanup checkpatch warnings") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: socket: Fix the wrong returns for recvmsg and sendmsgJunling Zheng2015-08-071-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 08adb7dabd4874cc5666b4490653b26534702ce0 upstream. We found that after v3.10.73, recvmsg might return -EFAULT while -EINVAL was expected. We tested it through the recvmsg01 testcase come from LTP testsuit. It set msg->msg_namelen to -1 and the recvmsg syscall returned errno 14, which is unexpected (errno 22 is expected): recvmsg01 4 TFAIL : invalid socket length ; returned -1 (expected -1), errno 14 (expected 22) Linux mainline has no this bug for commit 08adb7dab fixes it accidentally. However, it is too large and complex to be backported to LTS 3.10. Commit 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) made get_compat_msghdr() return error if msg_sys->msg_namelen was negative, which changed the behaviors of recvmsg and sendmsg syscall in a lib32 system: Before commit 281c9c36, get_compat_msghdr() wouldn't fail and it would return -EINVAL in move_addr_to_user() or somewhere if msg_sys->msg_namelen was invalid and then syscall returned -EINVAL, which is correct. And now, when msg_sys->msg_namelen is negative, get_compat_msghdr() will fail and wants to return -EINVAL, however, the outer syscall will return -EFAULT directly, which is unexpected. This patch gets the return value of get_compat_msghdr() as well as copy_msghdr_from_user(), then returns this expected value if get_compat_msghdr() fails. Fixes: 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) Signed-off-by: Junling Zheng <zhengjunling@huawei.com> Signed-off-by: Hanbing Xu <xuhanbing@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* sctp: Fix race between OOTB responce and route removalAlexander Sverdlin2015-08-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 29c4afc4e98f4dc0ea9df22c631841f9c220b944 ] There is NULL pointer dereference possible during statistics update if the route used for OOTB responce is removed at unfortunate time. If the route exists when we receive OOTB packet and we finally jump into sctp_packet_transmit() to send ABORT, but in the meantime route is removed under our feet, we take "no_route" path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...). But sctp_ootb_pkt_new() used to prepare responce packet doesn't call sctp_transport_set_owner() and therefore there is no asoc associated with this packet. Probably temporary asoc just for OOTB responces is overkill, so just introduce a check like in all other places in sctp_packet_transmit(), where "asoc" is dereferenced. To reproduce this, one needs to 0. ensure that sctp module is loaded (otherwise ABORT is not generated) 1. remove default route on the machine 2. while true; do ip route del [interface-specific route] ip route add [interface-specific route] done 3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT responce On x86_64 the crash looks like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.0.5-1-ARCH #1 Hardware name: ... task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000 RIP: 0010:[<ffffffffa05ec9ac>] [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP: 0018:ffff880127c037b8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480 RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700 RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28 R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0 FS: 0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0 Stack: ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520 0000000000000000 0000000000000001 0000000000000000 0000000000000000 Call Trace: <IRQ> [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp] [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp] [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp] [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210 [<ffffffff810e0329>] ? update_process_times+0x59/0x60 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0 [<ffffffff8101f599>] ? read_tsc+0x9/0x10 [<ffffffff8116d4b5>] ? put_page+0x55/0x60 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic] [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp] [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp] [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp] [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp] [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp] [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169] [<ffffffff8147896a>] net_rx_action+0x21a/0x360 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0 [<ffffffff8107912d>] irq_exit+0xad/0xb0 [<ffffffff8157d158>] do_IRQ+0x58/0xf0 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp] [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480 [<ffffffff8156b365>] rest_init+0x85/0x90 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184 Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9 RIP [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP <ffff880127c037b8> CR2: 0000000000000020 ---[ end trace 5aec7fd2dc983574 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) drm_kms_helper: panic occurred, switching back to text console ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: sctp alway uses init_net] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* neigh: do not modify unlinked entriesJulian Anastasov2015-08-071-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2c51a97f76d20ebf1f50fef908b986cb051fdff9 ] The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Fixes: a263b3093641 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: drop change to __neigh_set_probe_once() which we don't have] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* packet: avoid out of bounds read in round robin fanoutWillem de Bruijn2015-08-071-16/+2
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 468479e6043c84f5a65299cc07cb08a22a28c2b1 ] PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600698d ("packet: Add fanout support.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Adjust context - Demux functions return a sock pointer, not an index] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* packet: read num_members once in packet_rcv_fanout()Eric Dumazet2015-08-071-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit f98f4514d07871da7a113dd9e3e330743fd70ae4 ] We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb417115fb ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600698dc ("packet: Add fanout support.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* bridge: fix br_stp_set_bridge_priority race conditionsNikolay Aleksandrov2015-08-072-3/+3
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2dab80a8b486f02222a69daca6859519e05781d9 ] After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f258f19 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762e972 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f258f19 ("bridge: range check STP parameters") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* unix/caif: sk_socket can disappear when state is unlockedMark Salyzyn2015-08-072-0/+16
| | | | | | | | | | | | | | | [ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ] got a rare NULL pointer dereference in clear_bit Signed-off-by: Mark Salyzyn <salyzyn@android.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipvs: kernel oops - do_ip_vs_get_ctlHans Schillstrom2015-08-072-22/+39
| | | | | | | | | | | | | | | | | | commit 8537de8a7ab6681cc72fb0411ab1ba7fdba62dd0 upstream. Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by: "Ryan O'Hara" <rohara@redhat.com> Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Andreas Unterkircher <unki@netshadow.at>
* sctp: fix ASCONF list handlingMarcelo Ricardo Leitner2015-08-071-11/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2d45a02d0166caf2627fe91897c6ffc3b19514c4 upstream. ->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b67ae ("sctp: Add Auto-ASCONF support (core).") Reported-by: Ji Jianwen <jiji@redhat.com> Suggested-by: Neil Horman <nhorman@tuxdriver.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Adjust filename, context - Most per-netns state is global] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* udp: fix behavior of wrong checksumsEric Dumazet2015-08-072-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit beb39db59d14990e401e235faf66a6b9b31240b0 upstream. We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* bridge: fix multicast router rlist endless loopNikolay Aleksandrov2015-08-071-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | commit 1a040eaca1a22f8da8285ceda6b5e4a2cb704867 upstream. Since the addition of sysfs multicast router support if one set multicast_router to "2" more than once, then the port would be added to the hlist every time and could end up linking to itself and thus causing an endless loop for rlist walkers. So to reproduce just do: echo 2 > multicast_router; echo 2 > multicast_router; in a bridge port and let some igmp traffic flow, for me it hangs up in br_multicast_flood(). Fix this by adding a check in br_multicast_add_router() if the port is already linked. The reason this didn't happen before the addition of multicast_router sysfs entries is because there's a !hlist_unhashed check that prevents it. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 0909e11758bd ("bridge: Add multicast_router sysfs entries") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* bridge: fix parsing of MLDv2 reportsThadeu Lima de Souza Cascardo2015-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 upstream. When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.") Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Jonathan Toppins <jtoppins@cumulusnetworks.com>
* mac80211: move WEP tailroom size checkJanusz Dziedzic2015-08-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 47b4e1fc4972cc43a19121bc2608a60aef3bf216 upstream. Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [<ffffffff817bf491>] dump_stack+0x45/0x57 [<ffffffff8107746a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8107755a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc09ae109>] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [<ffffffffc09ae7ab>] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [<ffffffffc09d3fb1>] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: s/IEEE80211_WEP/WEP/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipvs: fix memory leak in ip_vs_ctl.cTommi Rantala2015-08-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f30bf2a5cac6c60ab366c4bc6db913597bf4d6ab upstream. Fix memory leak introduced in commit a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8262ea8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811fba74>] __kmalloc_track_caller+0x244/0x430 [<ffffffff811b88a0>] kmemdup+0x20/0x50 [<ffffffff823276b7>] ip_vs_control_net_init+0x1f7/0x510 [<ffffffff8231d630>] __ip_vs_init+0x100/0x250 [<ffffffff822363a1>] ops_init+0x41/0x190 [<ffffffff82236583>] setup_net+0x93/0x150 [<ffffffff82236cc2>] copy_net_ns+0x82/0x140 [<ffffffff810ab13d>] create_new_namespaces+0xfd/0x190 [<ffffffff810ab49a>] unshare_nsproxy_namespaces+0x5a/0xc0 [<ffffffff810833e3>] SyS_unshare+0x173/0x310 [<ffffffff8265cbd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ipvs: uninitialized data with IP_VS_IPV6Dan Carpenter2015-05-091-5/+5
| | | | | | | | | | | | | | | | commit 3b05ac3824ed9648c0d9c02d51d9b54e4e7e874f upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Pablo Neira Ayuso <pablo@netfilter.org>
* ipvs: rerouting to local clients is not needed anymoreJulian Anastasov2015-05-091-11/+21
| | | | | | | | | | | | | | | | | | | | | | commit 579eb62ac35845686a7c4286c0a820b4eb1f96aa upstream. commit f5a41847acc5 ("ipvs: move ip_route_me_harder for ICMP") from 2.6.37 introduced ip_route_me_harder() call for responses to local clients, so that we can provide valid rt_src after SNAT. It was used by TCP to provide valid daddr for ip_send_reply(). After commit 0a5ebb8000c5 ("ipv4: Pass explicit daddr arg to ip_send_reply()." from 3.0 this rerouting is not needed anymore and should be avoided, especially in LOCAL_IN. Fixes 3.12.33 crash in xfrm reported by Florian Wiessner: "3.12.33 - BUG xfrm_selector_match+0x25/0x2f6" Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.1 at 2024-05-03 07:03:01 +0000