aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/davinci/davinci-mcasp.c
Commit message (Collapse)AuthorAgeFilesLines
* merged more uncritical stuff from 3.2.72Wolfgang Wiedmeyer2015-10-231-7/+13
|
* ASoC: davinci-mcasp: enable ping-pong SRAM buffersBen Gardiner2011-05-191-0/+2
| | | | | | | | | | | | The davinci-i2s driver copies the platform data for playback and capture sram sizes which is in turn used by davinci-pcm to allocate ping-pong buffers. Copy also the platform data in davinci-mcasp probe. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* davinci-mcasp: fix _CBM_CFS pin directionsBen Gardiner2011-04-261-1/+3
| | | | | | | | | | | | | | | | | | | The current davinci_mcasp_set_dai_fmt() sets bits ACLKX and ACLKR in the PDIR register for the codec clock-master/frame-slave mode; however, this results in the ACLKX and ACLKR pins being outputs according to SPRUFM1 [1] which conflicts with "codec is clock master." Similarly to the previous patch in this series, "fix _CBM_CFS hw_params" -- For codec clock-master/frame-slave mode (_CMB_CFS), clear bits ACLKX and ACLKR in the PDIR register to set the pins as inputs and hence allow externally sourced bit-clocks. [1] http://www.ti.com/litv/pdf/sprufm1 Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: James Nuss <jamesnuss@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* davinci-mcasp: fix _CBM_CFS hw_paramsBen Gardiner2011-04-261-2/+2
| | | | | | | | | | | | | | | | | | | The current davinci_mcasp_set_dai_fmt() sets bits ACLKXE and ACLKRE (CLKXM and CLKRM as they are reffered to in SPRUFM1 [1]) for codec clock-slave/ frame-slave mode (_CBS_CFS) which selects internally generated bit-clock and frame-sync signals; however, it does the same thing again for codec clock-master/frame-slave mode (_CBM_CFS) in the very next case statement which is incorrectly selecting internally generated bit-clocks in this mode. For codec clock-master/frame-slave mode (_CBM_CFS), clear bits ACLKXE and ACLKRE to select externally-generated bit-clocks. [1] http://www.ti.com/litv/pdf/sprufm1 Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: James Nuss <jamesnuss@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* davinci-mcasp: use bitfield definitions for PDIRBen Gardiner2011-04-261-3/+6
| | | | | | | | | | | | | The current driver creates value for set/clr of PDIR using (x<<26) instead of the #defines that are convieniently made available. Update the driver to use the bitfield definitions of PDIR. There is no functional change introduced by this patch. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: James Nuss <jamesnuss@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: davinci-mcasp: correct tdm_slots limitBen Gardiner2011-04-261-2/+2
| | | | | | | | | | | | | | The current check for the number of tdm-slots specified by platform data is always true (x >= 2 || x <= 32); therefore the else branch that warns of an incorrect number of slots can never be taken. Check that the number of tdm slots specified by platform data is between 2 and 32, inclusive. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: James Nuss <jamesnuss@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Davinci: Replace usage of IO_ADDRESS with ioremap()Vaibhav Bedia2011-02-091-6/+14
| | | | | | | | | This patch modifies the Davinci i2s and mcasp drivers to make use of ioremap() instead of IO_ADDRESS() Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Davinci: Call clk_disable() and clk_put() in case of errorVaibhav Bedia2011-02-091-3/+6
| | | | | | | | | In case of any error in probe() function, clk_disable() and clk_put() should be called if clk_enable() and clk_get() went through. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Davinci: Use resource_size() helper functionVaibhav Bedia2011-02-091-3/+3
| | | | | | | | | This patch modifies the Davinci i2s and mcasp drivers to make use of the resource_size() helper function for readability. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: davinci: fixes for multi-componentChris Paulson-Ellis2010-11-171-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multi-component commit f0fba2ad broke a few things which this patch should fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be good if those with access to other Davinci boards could test. -- The multi-component commit put the initialisation of snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c). The initialisation had to be moved from the probe function in these drivers because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver. Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in davinci-pcm.c) before hw_params is called. I have moved the initialisation to a new snd_soc_dai_ops.startup function in each of these drivers. This fix indicates that all platforms that use davinci-pcm must have been broken and need to test with this fix. -- The multi-component commit also changed the McBSP driver name from "davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board level references to the driver name. This change is understandable, as there is a similarly named "davinci-mcasp" driver in davinci-mcasp.c. There is probably no 'correct' name for this driver. The DM6446 datasheet calls it the "ASP" and describes it as a "specialised McBSP". The DM355 datasheet calls it the "ASP" and describes it as a "specialised ASP". The DM365 datasheet calls it the "McBSP". Rather than fix this problem by reverting to "davinci-asp", I've elected to avoid future confusion with the "davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also consistent with the names of the functions in the driver. There are other fixes required, so it was never going to be as simple as a revert anyway. -- The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has 2 ports), so I've changed the the id of the platform_device from 0 to -1. -- In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link structure with the DM355 EVM as they use different cpu DAI names (the DM355 has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port). This also means that the 2 boards need different snd_soc_card structures. -- The codec_name entries in davinci-evm.c didn't match the i2c ids in the board files. I have only checked and fixed the details of the names used for the McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should check the others. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: davinci-mcasp.c: Return error code in failureJulia Lawall2010-10-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this code, 0 is returned on failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @a@ identifier alloc; identifier ret; constant C; expression x; @@ x = alloc(...); if (x == NULL) { <+... \(ret = -C; \| return -C; \) ...+> } @@ identifier f, a.alloc; expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = alloc(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2010-08-121-19/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: davinci: let platform data define edma queue numbersSekhar Nori2010-07-201-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the EDMA queue to be used by for servicing ASP through internal RAM is fixed to EDMAQ_0 and that to service internal RAM from external RAM is fixed to EDMAQ_1. This may not be the desirable configuration on all platforms. For example, on DM365, queue 0 has large fifo size and is more suitable for video transfers. Having audio and video transfers on the same queue may lead to starvation on audio side. platform data as defined currently passes a queue number to the driver but that remains unused inside the driver. Fix this by defining one queue each for ASP and RAM transfers in the platform data and using it inside the driver. Since EDMAQ_0 maps to 0, thats the queue that will be used if the asp queue number is not initialized. None of the platforms currently utilize ping-pong transfers through internal RAM so that functionality remains unchanged too. This patch has been tested on DM644x and OMAP-L138 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Fix McASP hardware FIFO configurationSudhakar Rajashekhara2010-06-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO support. This FIFO provides additional data buffering. It also provides tolerance to variation in host/DMA controller response times. More details of the FIFO operation can be found at http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=sprufm1&fileType=pdf Existing sequence of steps for audio playback/capture are: a. DMA configuration b. McASP configuration (configures and enables FIFO) c. Start DMA d. Start McASP (enables FIFO) During McASP configuration, while FIFO was being configured, FIFO was being enabled in davinci_hw_common_param() function of sound/soc/davinci/davinci-mcasp.c file. This generated a transmit DMA event, which gets serviced when DMA is started. https://patchwork.kernel.org/patch/84611/ patch clears the DMA events before starting DMA, which is the right thing to do. But this resulted in a state where DMA was waiting for an event from McASP (after step c above), but the event which was already there, has got cleared (because of step b above). The fix is not to enable the FIFO during McASP configuration as FIFO was being enabled as part of McASP start. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-04-071-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
| * ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack2010-04-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* ASoC: DaVinci: Fix stream restart errorChaithrika U S2010-01-261-3/+2
| | | | | | | | | | | | Sometimes after a suspend-resume cycle, the ALSA application restarts the stream when resume fails and McASP fails to work as the clock is not enabled. This patch corrects this bug. Testes on TI DA850/OMAP-L138 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Update suspend/resume support for McASP driverChaithrika U S2009-12-041-2/+16
| | | | | | | | | | | | | | | | Add clock enable and disable calls to resume and suspend respectively. Also add a member to the audio device data structure which tracks the clock status. Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches[1] which add suspend-to-RAM support to DA850/OMAP-L138 SoC were applied. [1] http://linux.davincidsp.com/pipermail/davinci-linux-open-source/ 2009-November/016958.html Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: remove requirement that dma_params is 1st in structureTroy Kisky2009-11-181-0/+1
| | | | | | | | | Remove requirement that dma_params is 1st in the structures davinci_audio_dev and davinci_mcbsp_dev. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: McASP FIFO related updatesChaithrika U S2009-09-301-10/+7
| | | | | | | | | | | The DMA params for McASP with FIFO has been updated so that it works for various FIFO levels. A member- 'fifo_level' has been added to the DMA params data structure. The fifo_level can be adjusted by the tx[rx]_numevt platform data. This is relevant only for DA8xx/OMAP-L1xx platforms. This implementation has been tested for numevt values 1, 2, 4, 8. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Correct McASP FIFO initializationChaithrika U S2009-09-231-18/+18
| | | | | | | | | | | McASP write FIFO registers should be modified for playback and read FIFO registers for capture. Check the PCM mode before manipulating the FIFO registers. Currently, irrespective of playback/capture both the FIFOs are enabled or disbaled. This resulted in errors in audio loopback mode. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Davinci: Fix race with cpu_dai->dma_dataTroy Kisky2009-09-231-34/+10
| | | | | | | | | | | This patch removes references to cpu_dai->dma_data. It makes struct davinci_pcm_dma_params part of struct davinci_mcbsp_dev or struct davinci_audio_dev. It removes the unused name variable from davinci_pcm_dma_params. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Fixes to McASP configurationChaithrika U S2009-09-181-2/+22
| | | | | | | | | | | McASP register settings are not correct for DSP mode of operation. There is a channel swap initally. This patch provides fixes to the register values for proper working. Tested on DA830/OMAP-L137 EVM, DM6467 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Add a DAI format to McASP driverChaithrika U S2009-08-131-0/+10
| | | | | | | | The patch adds a DAI format: Codec bit clock master and frame sync slave, to the driver. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: McASP driver enhacementsChaithrika U S2009-08-131-8/+97
| | | | | | | | | | | | | | | | | | On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO support. This FIFO provides additional data buffering. It also provides tolerance to variation in host/DMA controller response times. The read and write FIFO sizes are 256 bytes each. If FIFO is enabled, the DMA events from McASP are sent to the FIFO which in turn sends DMA requests to the host CPU according to the thresholds programmed. More details of the FIFO operation can be found at http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber= sprufm1&fileType=pdf This patch adds support for FIFO configuration. The platform data has a version field which differentiates the McASP on different SoCs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: davinci: don't use clock namesKevin Hilman2009-07-161-1/+1
| | | | | | | | clock name strings are no longer passed on platform_data. Instead, we rely entirely on struct device and clkdev to find the right clock. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Add mcasp support for DM646xChaithrika U S2009-06-071-0/+874
Adds driver support for the two instances of McASP on TI's DM646x. The multichannel audio serial port (McASP) functions as a general-purpose audio serial port optimized for the needs of multichannel audio application. (http://www.ti.com/litv/pdf/spruer1b). There are two instances of McASP on DM646x. The McASP0 module includes up to 4 serializers that can be individually enabled to either transmit or receive in different modes. The McASP1 module is limited with only 1 pinned-out serializer that can be enabled to only transmit in DIT mode (neither receiving in any mode nor transmitting in either Burst or TDM mode is supported). McASP0 consists of transmit and receive sections that may operate synchronized, or completely independently with separate master clocks, bit clocks, and frame syncs, and using different transmit modes with different bit-stream formats. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.1 at 2024-05-21 17:59:25 +0000