From 9e33a3553821418b2c4f53d09311476c55176b13 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 28 Mar 2011 13:33:40 +0200 Subject: rt2x00: Implement tx power temperature compensation rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 106 ++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800lib.c | 133 +++++++++++++++++++++++++++++-- drivers/net/wireless/rt2x00/rt2800lib.h | 1 + drivers/net/wireless/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/rt2x00/rt2800usb.c | 1 + drivers/net/wireless/rt2x00/rt2x00.h | 6 ++ drivers/net/wireless/rt2x00/rt2x00dev.c | 2 + drivers/net/wireless/rt2x00/rt2x00lib.h | 13 +++ drivers/net/wireless/rt2x00/rt2x00link.c | 38 +++++++++ 9 files changed, 296 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 70b9abb..3b3d851 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2104,6 +2104,59 @@ struct mac_iveiv_entry { #define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) /* + * EEPROM temperature compensation boundaries 802.11BG + * MINUS4: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -4) + * MINUS3: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -3) + */ +#define EEPROM_TSSI_BOUND_BG1 0x0037 +#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * MINUS2: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -2) + * MINUS1: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -1) + */ +#define EEPROM_TSSI_BOUND_BG2 0x0038 +#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * REF: Reference TSSI value, no tx power changes needed + * PLUS1: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 1) + */ +#define EEPROM_TSSI_BOUND_BG3 0x0039 +#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * PLUS2: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 2) + * PLUS3: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 3) + */ +#define EEPROM_TSSI_BOUND_BG4 0x003a +#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * PLUS4: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 4) + * AGC_STEP: Temperature compensation step. + */ +#define EEPROM_TSSI_BOUND_BG5 0x003b +#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00) + +/* * EEPROM TXPOWER 802.11A */ #define EEPROM_TXPOWER_A1 0x003c @@ -2113,6 +2166,59 @@ struct mac_iveiv_entry { #define EEPROM_TXPOWER_A_2 FIELD16(0xff00) /* + * EEPROM temperature compensation boundaries 802.11A + * MINUS4: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -4) + * MINUS3: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -3) + */ +#define EEPROM_TSSI_BOUND_A1 0x006a +#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * MINUS2: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -2) + * MINUS1: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -1) + */ +#define EEPROM_TSSI_BOUND_A2 0x006b +#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * REF: Reference TSSI value, no tx power changes needed + * PLUS1: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 1) + */ +#define EEPROM_TSSI_BOUND_A3 0x006c +#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * PLUS2: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 2) + * PLUS3: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 3) + */ +#define EEPROM_TSSI_BOUND_A4 0x006d +#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * PLUS4: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 4) + * AGC_STEP: Temperature compensation step. + */ +#define EEPROM_TSSI_BOUND_A5 0x006e +#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00) + +/* * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode */ #define EEPROM_TXPOWER_BYRATE 0x006f diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 0265133..59302fa 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1813,6 +1813,116 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®); } +static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) +{ + u8 tssi_bounds[9]; + u8 current_tssi; + u16 eeprom; + u8 step; + int i; + + /* + * Read TSSI boundaries for temperature compensation from + * the EEPROM. + * + * Array idx 0 1 2 3 4 5 6 7 8 + * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4 + * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00 + */ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_PLUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_AGC_STEP); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_PLUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_AGC_STEP); + } + + /* + * Check if temperature compensation is supported. + */ + if (tssi_bounds[4] == 0xff) + return 0; + + /* + * Read current TSSI (BBP 49). + */ + rt2800_bbp_read(rt2x00dev, 49, ¤t_tssi); + + /* + * Compare TSSI value (BBP49) with the compensation boundaries + * from the EEPROM and increase or decrease tx power. + */ + for (i = 0; i <= 3; i++) { + if (current_tssi > tssi_bounds[i]) + break; + } + + if (i == 4) { + for (i = 8; i >= 5; i--) { + if (current_tssi < tssi_bounds[i]) + break; + } + } + + return (i - 4) * step; +} + static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev, enum ieee80211_band band) { @@ -1904,7 +2014,8 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, } static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf) + enum ieee80211_band band, + int power_level) { u8 txpower; u16 eeprom; @@ -1912,8 +2023,6 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, u32 reg; u8 r1; u32 offset; - enum ieee80211_band band = conf->channel->band; - int power_level = conf->power_level; int delta; /* @@ -1922,6 +2031,11 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); /* + * calculate temperature compensation delta + */ + delta += rt2800_get_gain_calibration_delta(rt2x00dev); + + /* * set to normal bbp tx power control mode: +/- 0dBm */ rt2800_bbp_read(rt2x00dev, 1, &r1); @@ -2041,6 +2155,13 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, } } +void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev) +{ + rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band, + rt2x00dev->tx_power); +} +EXPORT_SYMBOL_GPL(rt2800_gain_calibration); + static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { @@ -2094,10 +2215,12 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev, if (flags & IEEE80211_CONF_CHANGE_CHANNEL) { rt2800_config_channel(rt2x00dev, libconf->conf, &libconf->rf, &libconf->channel); - rt2800_config_txpower(rt2x00dev, libconf->conf); + rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band, + libconf->conf->power_level); } if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800_config_txpower(rt2x00dev, libconf->conf); + rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band, + libconf->conf->power_level); if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) rt2800_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_PS) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 0c92d86..f2d1594 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -181,6 +181,7 @@ void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count); +void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev); int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index d305514..adc3534 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -1053,6 +1053,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, + .gain_calibration = rt2800_gain_calibration, .start_queue = rt2800pci_start_queue, .kick_queue = rt2800pci_kick_queue, .stop_queue = rt2800pci_stop_queue, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 1c99a4f..8b3ab3f 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -629,6 +629,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, + .gain_calibration = rt2800_gain_calibration, .watchdog = rt2800usb_watchdog, .start_queue = rt2800usb_start_queue, .kick_queue = rt2x00usb_kick_queue, diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 60b1cb0..dd0f66a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -348,6 +348,11 @@ struct link { * to bring the device/driver back into the desired state. */ struct delayed_work watchdog_work; + + /* + * Work structure for scheduling periodic AGC adjustments. + */ + struct delayed_work agc_work; }; enum rt2x00_delayed_flags { @@ -556,6 +561,7 @@ struct rt2x00lib_ops { struct link_qual *qual); void (*link_tuner) (struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count); + void (*gain_calibration) (struct rt2x00_dev *rt2x00dev); /* * Data queue handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 55c1d03..a98c434 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -71,6 +71,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) */ rt2x00queue_start_queues(rt2x00dev); rt2x00link_start_tuner(rt2x00dev); + rt2x00link_start_agc(rt2x00dev); /* * Start watchdog monitoring. @@ -93,6 +94,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Stop all queues */ + rt2x00link_stop_agc(rt2x00dev); rt2x00link_stop_tuner(rt2x00dev); rt2x00queue_stop_queues(rt2x00dev); rt2x00queue_flush_queues(rt2x00dev, true); diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 63c40d4..88f2f92 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -32,6 +32,7 @@ */ #define WATCHDOG_INTERVAL round_jiffies_relative(HZ) #define LINK_TUNE_INTERVAL round_jiffies_relative(HZ) +#define AGC_INTERVAL round_jiffies_relative(4 * HZ) /* * rt2x00_rate: Per rate device information @@ -271,6 +272,18 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev); void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev); /** + * rt2x00link_start_agc - Start periodic gain calibration + * @rt2x00dev: Pointer to &struct rt2x00_dev. + */ +void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00link_stop_agc - Stop periodic gain calibration + * @rt2x00dev: Pointer to &struct rt2x00_dev. + */ +void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev); + +/** * rt2x00link_register - Initialize link tuning & watchdog functionality * @rt2x00dev: Pointer to &struct rt2x00_dev. * diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index fc8cee9..128b361 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -446,8 +446,46 @@ static void rt2x00link_watchdog(struct work_struct *work) WATCHDOG_INTERVAL); } +void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev) +{ + struct link *link = &rt2x00dev->link; + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + rt2x00dev->ops->lib->gain_calibration) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->agc_work, + AGC_INTERVAL); +} + +void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev) +{ + cancel_delayed_work_sync(&rt2x00dev->link.agc_work); +} + +static void rt2x00link_agc(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, link.agc_work.work); + struct link *link = &rt2x00dev->link; + + /* + * When the radio is shutting down we should + * immediately cease the watchdog monitoring. + */ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + rt2x00dev->ops->lib->gain_calibration(rt2x00dev); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->agc_work, + AGC_INTERVAL); +} + void rt2x00link_register(struct rt2x00_dev *rt2x00dev) { + INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc); INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); } -- cgit v1.1