From 605a0bd66d9d55e9ba46da1a9e5140c68bdf6d85 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 15 Jul 2008 10:10:01 +0200 Subject: mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag I forgot this in the previous patch that made it unused. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 3 +-- drivers/net/wireless/b43legacy/main.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 +-- drivers/net/wireless/rt2x00/rt2500usb.c | 1 - drivers/net/wireless/rt2x00/rt61pci.c | 1 - drivers/net/wireless/rt2x00/rt73usb.c | 1 - drivers/net/wireless/zd1211rw/zd_mac.c | 1 - include/net/mac80211.h | 1 - 9 files changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index e78319a..3bf3a86 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index a1b8bf3..cb5ad4f 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; hw->queues = 1; /* FIXME: hardware has more queues */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a44188b..e3427c2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->rate_control_algorithm = "iwl-4965-rs"; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4a22d3f..05121f3 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->ibss_beacon = NULL; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* 4 EDCA QOS priorities */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3558cb2..449c8d3 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1650,7 +1650,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f7c1f92..ec4ec65 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2278,7 +2278,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index d383735..b9efa7f 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1871,7 +1871,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fcc532b..4d7b98b 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band; hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_SIGNAL_DB; hw->max_signal = 100; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4dd3d93..74487f2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -746,7 +746,6 @@ enum ieee80211_tkip_key_type { * Measurement, Channel Switch, Quieting, TPC */ enum ieee80211_hw_flags { - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, -- cgit v1.1 From 3a0f2c871849f23c1070965bf94dec3f9c0b479d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:18 +0200 Subject: Ath5k: fix memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When signal is noisy, hardware can use all RX buffers and since the last entry in the list is self-linked, it overwrites the entry until we link new buffers. Ensure that we don't free this last one until we are 100% sure that it is not used by the hardware anymore to not cause memory curruption as can be seen below. This is done by checking next buffer in the list. Even after that we know that the hardware refetched the new link and proceeded further (the next buffer is ready) we can finally free the overwritten buffer. We discard it since the status in its descriptor is overwritten (OR-ed by new status) too. ============================================================================= BUG kmalloc-4096: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff810067419060-0xffff810067419667. First byte 0x8 instead of 0x6b INFO: Allocated in dev_alloc_skb+0x18/0x30 age=1118 cpu=1 pid=0 INFO: Freed in skb_release_data+0x85/0xd0 age=1105 cpu=1 pid=3718 INFO: Slab 0xffffe200019d0600 objects=7 used=0 fp=0xffff810067419048 flags=0x40000000000020c3 INFO: Object 0xffff810067419048 @offset=4168 fp=0xffff81006741c120 Bytes b4 0xffff810067419038: 4f 0b 02 00 01 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a O.......ZZZZZZZZ Object 0xffff810067419048: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff810067419058: 6b 6b 6b 6b 6b 6b 6b 6b 08 42 30 00 00 0b 6b 80 kkkkkkkk.B0...k. Object 0xffff810067419068: f0 5d 00 4f 62 08 a3 64 00 0c 42 16 52 e4 f0 5a 360].Ob.243d..B.R344360Z Object 0xffff810067419078: 68 81 00 00 7b a5 b4 be 7d 3b 8f 53 cd d5 de 12 h...{245264276};.S315325336. Object 0xffff810067419088: 96 10 0b 89 48 54 23 41 0f 4e 2d b9 37 c3 cb 29 ....HT#A.N-2717303313) Object 0xffff810067419098: d1 e0 de 14 8a 57 2a cc 3b 44 0d 78 7a 19 12 15 321340336..W*314;D.xz... Object 0xffff8100674190a8: a9 ec d4 35 a8 10 ec 8c 40 a7 06 0a 51 a7 48 bb 2513543245250.354.@247..Q247H273 Object 0xffff8100674190b8: 3e cf a1 c7 38 60 63 3f 51 15 c7 20 eb ba 65 30 >ϡ3078`c?Q.307.353272e0 Redzone 0xffff81006741a048: bb bb bb bb bb bb bb bb 273273273273273273273273 Padding 0xffff81006741a088: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 3297, comm: ath5k_pci Not tainted 2.6.26-rc8-mm1_64 #427 Call Trace: [] print_trailer+0xf6/0x150 [] check_bytes_and_report+0x125/0x180 [] check_object+0xac/0x260 [] __slab_alloc+0x368/0x6d0 [] ? wireless_send_event+0x142/0x310 [] ? __alloc_skb+0x44/0x150 [] ? wireless_send_event+0x142/0x310 [] __kmalloc_track_caller+0xc3/0xf0 [] __alloc_skb+0x6e/0x150 [... stack snipped] FIX kmalloc-4096: Restoring 0xffff810067419060-0xffff810067419667=0x6b FIX kmalloc-4096: Marking all objects used Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 32 +++++++++++++++++++++++++------- drivers/net/wireless/ath5k/base.h | 2 +- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index d9769c5..ed51c4a 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1682,20 +1682,21 @@ ath5k_tasklet_rx(unsigned long data) struct ath5k_rx_status rs = {}; struct sk_buff *skb; struct ath5k_softc *sc = (void *)data; - struct ath5k_buf *bf; + struct ath5k_buf *bf, *bf_last; struct ath5k_desc *ds; int ret; int hdrlen; int pad; spin_lock(&sc->rxbuflock); + if (list_empty(&sc->rxbuf)) { + ATH5K_WARN(sc, "empty rx buf pool\n"); + goto unlock; + } + bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); do { rxs.flag = 0; - if (unlikely(list_empty(&sc->rxbuf))) { - ATH5K_WARN(sc, "empty rx buf pool\n"); - break; - } bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); BUG_ON(bf->skb == NULL); skb = bf->skb; @@ -1705,8 +1706,24 @@ ath5k_tasklet_rx(unsigned long data) pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, sc->desc_len, PCI_DMA_FROMDEVICE); - if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */ - break; + /* + * last buffer must not be freed to ensure proper hardware + * function. When the hardware finishes also a packet next to + * it, we are sure, it doesn't use it anymore and we can go on. + */ + if (bf_last == bf) + bf->flags |= 1; + if (bf->flags) { + struct ath5k_buf *bf_next = list_entry(bf->list.next, + struct ath5k_buf, list); + ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, + &rs); + if (ret) + break; + bf->flags &= ~1; + /* skip the overwritten one (even status is martian) */ + goto next; + } ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); if (unlikely(ret == -EINPROGRESS)) @@ -1816,6 +1833,7 @@ accept: next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); +unlock: spin_unlock(&sc->rxbuflock); } diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 47f414b..d7e03e6 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -56,7 +56,7 @@ struct ath5k_buf { struct list_head list; - unsigned int flags; /* tx descriptor flags */ + unsigned int flags; /* rx descriptor flags */ struct ath5k_desc *desc; /* virtual addr of desc */ dma_addr_t daddr; /* physical addr of desc */ struct sk_buff *skb; /* skbuff for buf */ -- cgit v1.1 From 10488f8ad62be3b860bad74e60b4fe6ab87aece3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:19 +0200 Subject: Ath5k: kill tasklets on shutdown Don't forget to kill tasklets on stop to not panic if they fire after freeing some structures. Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index ed51c4a..c5bf8a2 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2342,6 +2342,9 @@ ath5k_stop_hw(struct ath5k_softc *sc) mutex_unlock(&sc->lock); del_timer_sync(&sc->calib_tim); + tasklet_kill(&sc->rxtq); + tasklet_kill(&sc->txtq); + tasklet_kill(&sc->restq); return ret; } -- cgit v1.1 From 274c7c3638cd027b46f76d0caef96c1bad8b6701 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:20 +0200 Subject: Ath5k: flush work Make sure that the irq is not in progress after stop. This means two things: - ensure the intr setting register is set by flushing posted values - call synchronize_irq() after that Also flush stop tx write, inform callers of the tx stop about still pending transfers (unsuccessful stop) and finally don't wait another 3ms in ath5k_rx_stop, since ath5k_hw_stop_rx_dma ensures transfer to be finished. Make sure all writes will be ordered in respect to locks by mmiowb(). Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 13 +++++++++++-- drivers/net/wireless/ath5k/hw.c | 4 ++++ 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index c5bf8a2..8e9afb3 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -43,7 +43,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -1249,6 +1251,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) txq->link = &ds->ds_link; ath5k_hw_tx_start(ah, txq->qnum); + mmiowb(); spin_unlock_bh(&txq->lock); return 0; @@ -1583,7 +1586,6 @@ ath5k_rx_stop(struct ath5k_softc *sc) ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ - mdelay(3); /* 3ms is long enough for 1 frame */ ath5k_debug_printrxbuffs(sc, ah); @@ -2258,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc) ret = 0; done: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -2290,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); + synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); if (!test_bit(ATH_STAT_INVALID, sc->status)) { @@ -2339,6 +2343,7 @@ ath5k_stop_hw(struct ath5k_softc *sc) } } ath5k_txbuf_free(sc, sc->bbuf); + mmiowb(); mutex_unlock(&sc->lock); del_timer_sync(&sc->calib_tim); @@ -2804,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* XXX: assoc id is set to 0 for now, mac80211 doesn't have * a clean way of letting us retrieve this yet. */ ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + mmiowb(); } if (conf->changed & IEEE80211_IFCC_BEACON && @@ -2992,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } unlock: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -3065,8 +3072,10 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ret = ath5k_beacon_setup(sc, sc->bbuf); if (ret) sc->bbuf->skb = NULL; - else + else { ath5k_beacon_config(sc); + mmiowb(); + } end: mutex_unlock(&sc->lock); diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index c6d12c5..7ca87a5 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Stop queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* * Schedule TX disable and wait until queue is empty @@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Clear register */ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; } /* TODO: Check for success else return error */ @@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) /* ..re-enable interrupts */ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); return old_mask; } -- cgit v1.1 From e86600c7b4e9b9b22ba51620613d6159bf5cf504 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:43 +0200 Subject: Ath5k: fix dma operation Don't sync - coherent mapping (descriptors) - before unmap, it's useless - (wrongly anyway -- for_cpu) beacon skb, it's just mapped, so by the device yet Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8e9afb3..3aa22dc 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1704,10 +1704,6 @@ ath5k_tasklet_rx(unsigned long data) skb = bf->skb; ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); - /* * last buffer must not be freed to ensure proper hardware * function. When the hardware finishes also a packet next to @@ -1771,8 +1767,6 @@ ath5k_tasklet_rx(unsigned long data) goto next; } accept: - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, - rs.rs_datalen, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, PCI_DMA_FROMDEVICE); bf->skb = NULL; @@ -1860,9 +1854,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) list_for_each_entry_safe(bf, bf0, &txq->q, list) { ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); if (unlikely(ret == -EINPROGRESS)) break; @@ -2035,8 +2026,6 @@ ath5k_beacon_send(struct ath5k_softc *sc) ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); /* NB: hw still stops DMA, so proceed */ } - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len, - PCI_DMA_TODEVICE); ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); ath5k_hw_tx_start(ah, sc->bhalq); -- cgit v1.1 From 3e4242b99ce46fed82aa7f40ad5a1817a2b3bd45 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:21 +0200 Subject: Ath5k: suspend/resume fixes - free and re-request irq since it might have changed during suspend - disable and enable msi - don't set D0 state of the device, it's already done by the PCI layer - do restore_state before enable_device, it's safer - check ath5k_init return value Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Cc: Jesse Barnes Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3aa22dc..7273e9f 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -592,6 +592,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath5k_led_off(sc); ath5k_stop_hw(sc); + + free_irq(pdev->irq, sc); + pci_disable_msi(pdev); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -607,15 +610,12 @@ ath5k_pci_resume(struct pci_dev *pdev) struct ath5k_hw *ah = sc->ah; int i, err; - err = pci_set_power_state(pdev, PCI_D0); - if (err) - return err; + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) return err; - pci_restore_state(pdev); /* * Suspend/Resume resets the PCI configuration space, so we have to * re-disable the RETRY_TIMEOUT register (0x41) to keep @@ -623,7 +623,17 @@ ath5k_pci_resume(struct pci_dev *pdev) */ pci_write_config_byte(pdev, 0x41, 0); - ath5k_init(sc); + pci_enable_msi(pdev); + + err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (err) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_msi; + } + + err = ath5k_init(sc); + if (err) + goto err_irq; ath5k_led_enable(sc); /* @@ -637,6 +647,12 @@ ath5k_pci_resume(struct pci_dev *pdev) ath5k_hw_reset_key(ah, i); return 0; +err_irq: + free_irq(pdev->irq, sc); +err_msi: + pci_disable_msi(pdev); + pci_disable_device(pdev); + return err; } #endif /* CONFIG_PM */ -- cgit v1.1 From 734b5aa911dc65f4563048f069dfc631c9aa7de7 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 15 Jul 2008 13:07:16 -0400 Subject: ath5k: use positive logic for HP laptop LEDs Helge Deller reports that HP laptops (NC4010 and NC6000) use active- high signals to turn on the LEDs. Previous code used active-low for all devices. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 7273e9f..359795d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2581,8 +2581,6 @@ ath5k_init_leds(struct ath5k_softc *sc) struct pci_dev *pdev = sc->pdev; char name[ATH5K_LED_MAX_NAME_LEN + 1]; - sc->led_on = 0; /* active low */ - /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. @@ -2591,11 +2589,13 @@ ath5k_init_leds(struct ath5k_softc *sc) pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 0; + sc->led_on = 0; /* active low */ } /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 1; + sc->led_on = 1; /* active high */ } if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) goto out; -- cgit v1.1 From 2fd9b2212e25e6411b6f309707f4e2683d164250 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:17 -0300 Subject: rfkill: document rfkill_force_state as required (v2) While the rfkill class does work with just get_state(), it doesn't work well on devices that are subject to external events that cause rfkill state changes. Document that rfkill_force_state() is required in those cases. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- Documentation/rfkill.txt | 20 ++++++++++++++++---- net/rfkill/rfkill.c | 7 ++++++- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 0843ed0..28b6ec8 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft rfkill input line is active. Only if none of the rfkill input lines are active, will it return RFKILL_STATE_UNBLOCKED. -If it doesn't implement the get_state() hook, it must make sure that its calls -to rfkill_force_state() are enough to keep the status always up-to-date, and it -must do a rfkill_force_state() on resume from sleep. +Since the device has a hardware rfkill line, it IS subject to state changes +external to rfkill. Therefore, the driver must make sure that it calls +rfkill_force_state() to keep the status always up-to-date, and it must do a +rfkill_force_state() on resume from sleep. Every time the driver gets a notification from the card that one of its rfkill lines changed state (polling might be needed on badly designed cards that don't @@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried about its current state). The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often. +to know the *real* current state of the hardware. This can happen often, but +it does not do any polling, so it is not enough on hardware that is subject +to state changes outside of the rfkill subsystem. + +Therefore, calling rfkill_force_state() when a state change happens is +mandatory when the device has a hardware rfkill line, or when something else +like the firmware could cause its state to be changed without going through the +rfkill class. Some hardware provides events when its status changes. In these cases, it is best for the driver to not provide a get_state hook, and instead register the rfkill class *already* with the correct status, and keep it updated using rfkill_force_state() when it gets an event from the hardware. +rfkill_force_state() must be used on the device resume handlers to update the +rfkill status, should there be any chance of the device status changing during +the sleep. + There is no provision for a statically-allocated rfkill struct. You must use rfkill_allocate() to allocate one. diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 7a560b7..022fe50 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -252,7 +252,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo); * a notification by the firmware/hardware of the current *real* * state of the radio rfkill switch. * - * It may not be called from an atomic context. + * Devices which are subject to external changes on their rfkill + * state (such as those caused by a hardware rfkill line) MUST + * have their driver arrange to call rfkill_force_state() as soon + * as possible after such a change. + * + * This function may not be called from an atomic context. */ int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) { -- cgit v1.1 From 37f55e9d78d1b63047b1b7ae175cdce650547ba8 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:18 -0300 Subject: rfkill: fix led-trigger unregister order in error unwind rfkill needs to unregister the led trigger AFTER a call to rfkill_remove_switch(), otherwise it will not update the LED state, possibly leaving it ON when it should be OFF. To make led-trigger unregistering safer, guard against unregistering a trigger twice, and also against issuing trigger events to a led trigger that was unregistered. This makes the error unwind paths more resilient. Refer to "rfkill: Register LED triggers before registering switch". Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Michael Buesch Cc: Dmitry Baryshkov Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 022fe50..fc3a4fd 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -590,8 +590,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) static void rfkill_led_trigger_unregister(struct rfkill *rfkill) { #ifdef CONFIG_RFKILL_LEDS - if (rfkill->led_trigger.name) + if (rfkill->led_trigger.name) { led_trigger_unregister(&rfkill->led_trigger); + rfkill->led_trigger.name = NULL; + } #endif } @@ -627,8 +629,8 @@ int rfkill_register(struct rfkill *rfkill) error = device_add(dev); if (error) { - rfkill_led_trigger_unregister(rfkill); rfkill_remove_switch(rfkill); + rfkill_led_trigger_unregister(rfkill); return error; } -- cgit v1.1 From f1b23361a0f15497d4c6795a2935b2e98064ddfb Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:19 -0300 Subject: rfkill: document the rfkill struct locking (v2) Reorder fields in struct rfkill and add comments to make it clear which fields are protected by rfkill->mutex. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/linux/rfkill.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c5f6e54..741d1a6 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -68,7 +68,8 @@ enum rfkill_state { * @user_claim_unsupported: Whether the hardware supports exclusive * RF-kill control by userspace. Set this before registering. * @user_claim: Set when the switch is controlled exlusively by userspace. - * @mutex: Guards switch state transitions + * @mutex: Guards switch state transitions. It serializes callbacks + * and also protects the state. * @data: Pointer to the RF button drivers private data which will be * passed along when toggling radio state. * @toggle_radio(): Mandatory handler to control state of the radio. @@ -89,12 +90,13 @@ struct rfkill { const char *name; enum rfkill_type type; - enum rfkill_state state; bool user_claim_unsupported; bool user_claim; + /* the mutex serializes callbacks and also protects + * the state */ struct mutex mutex; - + enum rfkill_state state; void *data; int (*toggle_radio)(void *data, enum rfkill_state state); int (*get_state)(void *data, enum rfkill_state *state); -- cgit v1.1 From 064af1117b4aa64a0e52f6b741df7356ef055142 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:20 -0300 Subject: rfkill: mutex fixes There are two mutexes in rfkill: rfkill->mutex, which protects some of the fields of a rfkill struct, and is also used for callback serialization. rfkill_mutex, which protects the global state, the list of registered rfkill structs and rfkill->claim. Make sure to use the correct mutex, and to not miss locking rfkill->mutex even when we already took rfkill_mutex. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index fc3a4fd..ac205ec 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -150,7 +150,7 @@ static void update_rfkill_state(struct rfkill *rfkill) * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to * give the driver a hint that it should double-BLOCK the transmitter. * - * Caller must have aquired rfkill_mutex. + * Caller must have acquired rfkill->mutex. */ static int rfkill_toggle_radio(struct rfkill *rfkill, enum rfkill_state state, @@ -216,8 +216,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) rfkill_states[type] = state; list_for_each_entry(rfkill, &rfkill_list, node) { - if ((!rfkill->user_claim) && (rfkill->type == type)) + if ((!rfkill->user_claim) && (rfkill->type == type)) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, state, 0); + mutex_unlock(&rfkill->mutex); + } } mutex_unlock(&rfkill_mutex); @@ -228,7 +231,7 @@ EXPORT_SYMBOL(rfkill_switch_all); * rfkill_epo - emergency power off all transmitters * * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring - * everything in its path but rfkill_mutex. + * everything in its path but rfkill_mutex and rfkill->mutex. */ void rfkill_epo(void) { @@ -236,7 +239,9 @@ void rfkill_epo(void) mutex_lock(&rfkill_mutex); list_for_each_entry(rfkill, &rfkill_list, node) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } mutex_unlock(&rfkill_mutex); } @@ -372,6 +377,9 @@ static ssize_t rfkill_claim_store(struct device *dev, if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (rfkill->user_claim_unsupported) + return -EOPNOTSUPP; + /* * Take the global lock to make sure the kernel is not in * the middle of rfkill_switch_all @@ -380,19 +388,17 @@ static ssize_t rfkill_claim_store(struct device *dev, if (error) return error; - if (rfkill->user_claim_unsupported) { - error = -EOPNOTSUPP; - goto out_unlock; - } if (rfkill->user_claim != claim) { - if (!claim) + if (!claim) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type], 0); + mutex_unlock(&rfkill->mutex); + } rfkill->user_claim = claim; } -out_unlock: mutex_unlock(&rfkill_mutex); return error ? error : count; @@ -521,8 +527,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill) { mutex_lock(&rfkill_mutex); list_del_init(&rfkill->node); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); mutex_unlock(&rfkill_mutex); + + mutex_lock(&rfkill->mutex); + rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } /** -- cgit v1.1 From 435307a365ceedc4f4e1813e405f583f434d98e4 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:22 -0300 Subject: rfkill: yet more minor kernel-doc fixes For some stupid reason, I sent and old version of the patch minor kernel doc-fix patch, and it got merged before I noticed the problem. This is an incremental fix on top. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index ac205ec..c6f2f38 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill) /** * rfkill_toggle_radio - wrapper for toggle_radio hook - * * @rfkill: the rfkill struct to use * @force: calls toggle_radio even if cache says it is not needed, * and also makes sure notifications of the state will be @@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill) * calls and handling all the red tape such as issuing notifications * if the call is successful. * - * Note that @force cannot override a (possibly cached) state of - * RFKILL_STATE_HARD_BLOCKED. Any device making use of + * Note that the @force parameter cannot override a (possibly cached) + * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of * RFKILL_STATE_HARD_BLOCKED implements either get_state() or * rfkill_force_state(), so the cache either is bypassed or valid. * @@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill, /** * rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affeceted + * @type: type of interfaces to be affected * @state: the new state * - * This function toggles state of all switches of given type unless - * a specific switch is claimed by userspace in which case it is - * left alone. + * This function toggles the state of all switches of given type, + * unless a specific switch is claimed by userspace (in which case, + * that switch is left alone). */ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) { @@ -540,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill) * @type: type of the switch (RFKILL_TYPE_*) * * This function should be called by the network driver when it needs - * rfkill structure. Once the structure is allocated the driver shoud - * finish its initialization by setting name, private data, enable_radio + * rfkill structure. Once the structure is allocated the driver should + * finish its initialization by setting the name, private data, enable_radio * and disable_radio methods and then register it with rfkill_register(). + * * NOTE: If registration fails the structure shoudl be freed by calling * rfkill_free() otherwise rfkill_unregister() should be used. */ @@ -574,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate); * rfkill_free - Mark rfkill structure for deletion * @rfkill: rfkill structure to be destroyed * - * Decrements reference count of rfkill structure so it is destroyed. + * Decrements reference count of the rfkill structure so it is destroyed. * Note that rfkill_free() should _not_ be called after rfkill_unregister(). */ void rfkill_free(struct rfkill *rfkill) -- cgit v1.1 From 699669f331a9e459713e4327a468db8fbb8cd60f Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 16 Jul 2008 16:39:56 +0300 Subject: iwl-3945: add #ifdef CONFIG_IWL3945_LEDS to avoid compile warning. When building the wireless-next-2.6 tree with CONFIG_IWL3945 (for building iwl-3945 driver) and where CONFIG_IWL3945_LEDS is not set, we get this warning: drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_pass_packet_to_mac80211': drivers/net/wireless/iwlwifi/iwl-3945.c:633: warning: unused variable 'hdr' This patch adds #ifdef to iwl3945_pass_packet_to_mac80211() to avoid this warning. (The variable 'hdr' is used only if CONFIG_IWL3945_LEDS is set) Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index c2a7678..a51e0ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct ieee80211_rx_status *stats) { struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; +#ifdef CONFIG_IWL3945_LEDS struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); +#endif struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); short len = le16_to_cpu(rx_hdr->len); -- cgit v1.1 From fb904907fb1a02a64af9f2d1fb1ef35d963231f9 Mon Sep 17 00:00:00 2001 From: Brian Cavagnolo Date: Wed, 16 Jul 2008 12:15:26 -0700 Subject: libertas: check bounds and only use decimal for sysfs persistent features. Some persistent settings were using hex and others decimal. In some cases, values were set in hex but reported in decimal. Confusing. Signed-off-by: Brian Cavagnolo Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/persistcfg.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c index 6d0ff8d..3309a9c 100644 --- a/drivers/net/wireless/libertas/persistcfg.c +++ b/drivers/net/wireless/libertas/persistcfg.c @@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag)); + return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag)); } /** @@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 1)) return -EINVAL; *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum); @@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", defs.boottime); + return snprintf(buf, 12, "%d\n", defs.boottime); } /** @@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* A too small boot time will result in the device booting into @@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel)); + return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel)); } /** @@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr, { struct lbs_private *priv = to_net_dev(dev)->priv; struct cmd_ds_mesh_config cmd; - uint16_t datum; + uint32_t datum; int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%hx", &datum); + ret = sscanf(buf, "%d", &datum); if (ret != 1 || datum < 1 || datum > 11) return -EINVAL; @@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ -- cgit v1.1 From c0b6a1c9be3acac0f600072ebc2bc6ad3d8c8f76 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Thu, 17 Jul 2008 13:19:24 +0400 Subject: iwlwifi: compilation error when CONFIG_IWLWIFI_DEBUG is not set CC [M] drivers/net/wireless/iwlwifi/iwl-rfkill.o drivers/net/wireless/iwlwifi/iwl-led.c: In function 'iwl_led_brightness_set': drivers/net/wireless/iwlwifi/iwl-led.c:198: error: 'led_type_str' undeclared (first use in this function) drivers/net/wireless/iwlwifi/iwl-led.c:198: error: (Each undeclared identifier is reported only once drivers/net/wireless/iwlwifi/iwl-led.c:198: error: for each function it appears in.) The problem is that led_type_str is defined under CONFIG_IWLWIFI_DEBUG while IWL_DEBUG is a static inline function in this case. Replace it with macro. Signed-off-by: Denis V. Lunev Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-debug.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 5838480..d6d729e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv); #endif #else -static inline void IWL_DEBUG(int level, const char *fmt, ...) -{ -} -static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...) -{ -} +#define IWL_DEBUG(level, fmt, args...) +#define IWL_DEBUG_LIMIT(level, fmt, args...) #endif /* CONFIG_IWLWIFI_DEBUG */ -- cgit v1.1 From cb9289cb798502a5010c8f1d8d003842cd1449a4 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Fri, 18 Jul 2008 10:56:12 +0400 Subject: iwlwifi: small compile warnings without CONFIG_IWLWIFI_DEBUG CC [M] drivers/net/wireless/iwlwifi/iwl-scan.o drivers/net/wireless/iwlwifi/iwl-scan.c: In function 'iwl_rx_scan_complete_notif': drivers/net/wireless/iwlwifi/iwl-scan.c:274: warning: unused variable 'scan_notif' Signed-off-by: Denis V. Lunev Acked-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index efc750d..5a00ac2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv, static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { +#ifdef CONFIG_IWLWIFI_DEBUG struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; @@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, scan_notif->scanned_channels, scan_notif->tsf_low, scan_notif->tsf_high, scan_notif->status); +#endif /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); -- cgit v1.1 From bc05116ab33d30342e2b4b1bcc6d6e1184e9df97 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 18 Jul 2008 11:11:21 -0400 Subject: ath5k: fix recursive locking in ath5k_beacon_update ath5k_beacon_update takes sc->lock upon entry. However, it is only called from within ath5k_config_interface, which already holds the lock. Remove the unnecessary locking from ath5k_beacon_update. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 359795d..3285032 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -3065,8 +3065,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ath5k_debug_dump_skb(sc, skb, "BC ", 1); - mutex_lock(&sc->lock); - if (sc->opmode != IEEE80211_IF_TYPE_IBSS) { ret = -EIO; goto end; @@ -3083,7 +3081,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) } end: - mutex_unlock(&sc->lock); return ret; } -- cgit v1.1 From 256b152b005e319f985f50f2a910a75ba0def74f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 18 Jul 2008 12:56:59 -0400 Subject: ath5k: don't enable MSI, we cannot handle it yet MSI is a nice thing, but we cannot enable it without changing the interrupt handler. If we do it, we break MSI capable hardware, specifically AR5006 chipset. Signed-off-by: Pavel Roskin Acked-by: Nick Kossifidis Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3285032..1106d1c 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -473,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev, /* Set private data */ pci_set_drvdata(pdev, hw); - /* Enable msi for devices that support it */ - pci_enable_msi(pdev); - /* Setup interrupt handler */ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); if (ret) { @@ -553,7 +550,6 @@ err_ah: err_irq: free_irq(pdev->irq, sc); err_free: - pci_disable_msi(pdev); ieee80211_free_hw(hw); err_map: pci_iounmap(pdev, mem); @@ -575,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev) ath5k_detach(pdev, hw); ath5k_hw_detach(sc->ah); free_irq(pdev->irq, sc); - pci_disable_msi(pdev); pci_iounmap(pdev, sc->iobase); pci_release_region(pdev, 0); pci_disable_device(pdev); -- cgit v1.1 From ed06387b44f0501f7298b559dc8ddfcd410c8fa0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 19 Jul 2008 16:15:42 +0200 Subject: rt2x00: Remove duplicate declaration rt2x00queue_free_skb() was declared twice. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index f2c9b0e..c5fb3a7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** - * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. - */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - -/** * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send * @skb: The skb to send -- cgit v1.1 From f2fdbc4847e0d3991474949f21aa439c361391db Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 19 Jul 2008 16:16:12 +0200 Subject: rt2x00: Fix EIFS timing value Olivier reported a difference between the EIFS values used in the legacy driver and the one in the rt2x00 drivers. In rt2x00 the value was ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) which comes down to 314us while the legacy driver uses the value 364us This was caused because EIFS is: SIFS + DIFS + AckTime This patch will fix this by adding the DIFS by the above value, and creating a SHORT_EIFS define which uses the SHORT_DIFS. Reported-by: Olivier Cornu Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 5 ++++- drivers/net/wireless/rt2x00/rt2x00config.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 07b03b3..73495f0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -108,7 +108,10 @@ #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) #define DIFS ( PIFS + SLOT_TIME ) #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define EIFS ( SIFS + DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define SHORT_EIFS ( SIFS + SHORT_DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* * Chipset identification diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index f20ca71..3f89516 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -271,7 +271,7 @@ config: libconf.sifs = SIFS; libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = EIFS; + libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS; } libconf.conf = conf; -- cgit v1.1 From ed0dbeeb92bdb1030bcec67e20b294bd2020cb31 Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:16:54 +0200 Subject: rt2x00: Support for large vendor requests Adds an extra rt2x00 vendor request function to support register transfers beyond the CSR_CACHE_SIZE / USB packet size limit. This is useful for firmware uploads, beacon templates and keys, all of which are to large to do with a single USB request. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 32 ++++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00usb.h | 21 ++++++++++++++++++++- 2 files changed, 52 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 83862e7..933e6cc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout) +{ + int status = 0; + unsigned char *tb; + u16 off, len, bsize; + + mutex_lock(&rt2x00dev->usb_cache_mutex); + + tb = buffer; + off = offset; + len = buffer_length; + while (len && !status) { + bsize = min_t(u16, CSR_CACHE_SIZE, len); + status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, + requesttype, off, tb, + bsize, timeout); + + tb += bsize; + len -= bsize; + off += bsize; + } + + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index aad794ad..8d5d427 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -70,7 +70,7 @@ /* * Cache size */ -#define CSR_CACHE_SIZE 8 +#define CSR_CACHE_SIZE 64 #define CSR_CACHE_SIZE_FIRMWARE 64 /* @@ -172,6 +172,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u16 buffer_length, const int timeout); /** + * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register start offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * This function is used to transfer register data in blocks larger + * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons. + */ +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout); + +/** * rt2x00usb_vendor_request_sw - Send single register command to device * @rt2x00dev: Pointer to &struct rt2x00_dev * @request: USB vendor command (See &enum rt2x00usb_vendor_request) -- cgit v1.1 From 3e0c1abe748a30bc705a55f71bca8e04a83820f1 Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:17:16 +0200 Subject: rt2x00: Large vendor requests for rt73usb firmware upload and beacons Switches rt73usb to use large vendor requests for firmware and beacons. This also fixes the garbled beacon bug. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.h | 1 - drivers/net/wireless/rt2x00/rt73usb.c | 40 ++++++++------------------------- 2 files changed, 9 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 8d5d427..ee3875f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -71,7 +71,6 @@ * Cache size */ #define CSR_CACHE_SIZE 64 -#define CSR_CACHE_SIZE_FIRMWARE 64 /* * USB request types. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b9efa7f..fc320c0 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, unsigned int i; int status; u32 reg; - const char *ptr = data; - char *cache; - int buflen; /* * Wait for stable hardware. @@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, /* * Write firmware to device. - * We setup a seperate cache for this action, - * since we are going to write larger chunks of data - * then normally used cache size. */ - cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); - if (!cache) { - ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); - return -ENOMEM; - } - - for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { - buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - - memcpy(cache, ptr, buflen); - - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, - REGISTER_TIMEOUT32(buflen)); - - ptr += buflen; - } - - kfree(cache); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, + data, len, + REGISTER_TIMEOUT32(len)); /* * Send firmware request to device to load firmware, @@ -1374,10 +1352,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, 0, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); /* * Clean up the beacon skb. -- cgit v1.1 From b93ce437eba7e0232683326f30d9d1167a872fad Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:17:40 +0200 Subject: rt2x00: Fix the beacon length bug When setting up a beacon template, the length of the beacon is calculated with the assumption that the SKB already contains the Tx descriptor. In the case of beacons it doesn't. This patch undoes the damage by adding the Tx descriptor length to the beacon length. This is safe, because the shortest possible beacon is longer than the Tx header. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 12 ++++++++++++ drivers/net/wireless/rt2x00/rt73usb.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 449c8d3..3078417 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fc320c0..8665046 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1330,6 +1330,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1339,6 +1340,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ -- cgit v1.1 From 5adf6d63c1697ce1835daf2b5393488a71ee0dca Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 20 Jul 2008 18:03:38 +0200 Subject: rt2x00: Fix QOS sequence counting When IEEE80211_TX_CTL_ASSIGN_SEQ is not set, the driver should disable hardware sequence counting to make sure the mac80211 provided counter is used. This fixes QOS sequence counting, since that is one of the cases where mac80211 provides a seperate sequence counter. By moving the sequence counting code to rt2x00queue we make sure that _all_ frames get the sequence counter, including RTS/CTS and Beacon frames. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 13 ------------- drivers/net/wireless/rt2x00/rt2x00queue.c | 26 ++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00queue.h | 2 ++ drivers/net/wireless/rt2x00/rt61pci.c | 3 ++- drivers/net/wireless/rt2x00/rt73usb.c | 3 ++- 5 files changed, 32 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index f1dcbaa..9d346bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -96,7 +96,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; enum data_queue_qid qid = skb_get_queue_mapping(skb); - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct data_queue *queue; u16 frame_control; @@ -152,18 +151,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } } - /* - * XXX: This is as wrong as the old mac80211 code was, - * due to beacons not getting sequence numbers assigned - * properly. - */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - intf->seqno += 0x10; - ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - } - if (rt2x00queue_write_tx_frame(queue, skb)) { ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7f44203..7b581a3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); @@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, } /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + spin_lock(&intf->lock); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock(&intf->lock); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + } + + /* * PLCP setup * Length calculation depends on OFDM/CCK rate. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 8945945..a4a8c57 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -199,6 +199,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. @@ -210,6 +211,7 @@ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, ENTRY_TXD_CTS_FRAME, ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_GENERATE_SEQ, ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, ENTRY_TXD_REQ_TIMESTAMP, diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ec4ec65..fbe2a65 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 8665046..9761eaa 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1281,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); -- cgit v1.1 From e7087a828f8714e464fff18d93618727530dfd89 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 20 Jul 2008 18:03:58 +0200 Subject: rt2x00: Fix memleak when RTS/CTS fails When sending the RTS/CTS frame fails, we should free the skb buffer which was created. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 9d346bd..1f83d5f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, (struct ieee80211_rts *)(skb->data)); if (rt2x00queue_write_tx_frame(queue, skb)) { + dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } -- cgit v1.1 From 80c42affad970c8ebc5ebec4681aef8dadf21c32 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 09:58:11 +0200 Subject: drivers/net/wireless/ipw2100.c: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 5bf9e00..c6f886e 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev) if (err) { printk(KERN_ERR "%s: pci_enable_device failed on resume\n", dev->name); + mutex_unlock(&priv->action_mutex); return err; } pci_restore_state(pci_dev); @@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev, err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); if (err) { IPW_DEBUG_WX("failed querying ordinals.\n"); - return err; + goto done; } switch (val & TX_RATE_MASK) { -- cgit v1.1 From 4104863fb4a724723d1d5f3cba9d3c5084087e45 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 11:29:34 +0200 Subject: b43legacy: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: Michael Buesch Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index cb5ad4f..2541c81 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3845,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev) goto out; } } - mutex_unlock(&wl->mutex); b43legacydbg(wl, "Device resumed.\n"); out: + mutex_unlock(&wl->mutex); return err; } -- cgit v1.1 From 74c0ee9b59bdaa81a666d5d58022f847390e4b0c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 21 Jul 2008 11:52:44 +0200 Subject: rt2x00: Force full register config after start() rt2x00 will only perform configuration changes from mac80211 when the configuration option has changed. This means it keeps track of the current active configuration and will check these values when the config() callback function is used. However this causes breakage when the interface has been brought down and up again, since all stored active values aren't reset while the registers might have. This is for example the case with rt61pci antenna registers which will jump to invalid values when the interface has been started. To make sure a full configuration takes place after the start() callback function, a new flag is added which will be checked during config() and skips the "what's changed" phase. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 1 + drivers/net/wireless/rt2x00/rt2x00dev.c | 7 ++++--- drivers/net/wireless/rt2x00/rt2x00mac.c | 13 ++++++++++++- 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 73495f0..db2dc97 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -600,6 +600,7 @@ enum rt2x00_flags { DEVICE_STARTED_SUSPEND, DEVICE_ENABLED_RADIO, DEVICE_DISABLED_RADIO_HW, + DEVICE_DIRTY_CONFIG, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 8c93eb8..f42283a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_associated = 0; __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); return 0; } @@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); - if (!rt2x00dev->hw->conf.radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); + retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + if (retval) + goto exit; /* * Iterator over each active interface to diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 1f83d5f..042ab00 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -310,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; + int force_reconfig; /* * Mac80211 might be calling this function while we are trying @@ -329,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); } - rt2x00lib_config(rt2x00dev, conf, 0); + /* + * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently + * been started and the configuration must be forced upon the hardware. + * Otherwise registers will not be intialized correctly and could + * result in non-working hardware because essential registers aren't + * initialized. + */ + force_reconfig = + __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + + rt2x00lib_config(rt2x00dev, conf, force_reconfig); /* * Reenable RX only if the radio should be on. -- cgit v1.1 From 9c0ab712c7e40b61063431cae74a3e763535a4e7 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 21 Jul 2008 19:06:02 +0200 Subject: rt2x00: Clear queue entry flags during initialization When the queues are being initialized the entry flags fields must be reset to 0. When this does not happen some entries might still be marked as "occupied" after an ifdown & ifup cycle which would trigger errors when the entry is being accessed: phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. Please file bug report to http://rt2x00.serialmonkey.com. This also fixes the mac80211 warning: ------------[ cut here ]------------ WARNING: at net/mac80211/tx.c:1238 ieee80211_master_start_xmit+0x30a/0x350 [mac80211]() which was triggered by the queue error. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7b581a3..3b27f6a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -492,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_rxentry) return; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &queue->entries[i]); + } } void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) @@ -508,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_txentry) continue; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_txentry(rt2x00dev, &queue->entries[i]); + } } } -- cgit v1.1 From 1b0241656b658522a15e7aad570cb8ea6b255a2a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 14 Jul 2008 12:43:23 +0200 Subject: mac80211: tx, use dev_kfree_skb_any for beacon_get Use dev_kfree_skb_any(); instead of dev_kfree_skb();, since ieee80211_beacon_get function might be called from atomic. (It's in a fail path.) Signed-off-by: Jiri Slaby Cc: Johannes Berg Cc: Michael Wu Signed-off-by: John W. Linville --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0fbadd8..7e99d16 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1931,7 +1931,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, "no rate found\n", wiphy_name(local->hw.wiphy)); } - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); skb = NULL; goto out; } -- cgit v1.1 From 023a04bebe7030c1e6d5347bd3f27a3e49a1f222 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 14 Jul 2008 12:52:08 -0700 Subject: mac80211: return correct error return from ieee80211_wep_init Return the proper error code rather than a hard-coded ENOMEM from ieee80211_wep_init. Also, print the error code on failure. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: John W. Linville --- net/mac80211/main.c | 4 ++-- net/mac80211/wep.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index f1a83d4..b5830f7 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1731,8 +1731,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) result = ieee80211_wep_init(local); if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep\n", - wiphy_name(local->hw.wiphy)); + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); goto fail_wep; } diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index 872d2fc..5c2bf0a 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local) local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_tx_tfm)) - return -ENOMEM; + return PTR_ERR(local->wep_tx_tfm); local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_rx_tfm)) { crypto_free_blkcipher(local->wep_tx_tfm); - return -ENOMEM; + return PTR_ERR(local->wep_rx_tfm); } return 0; -- cgit v1.1 From 031211049b71619f7e776521963c082ca453d9fd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 22 Jul 2008 23:50:04 -0700 Subject: drivers/net/wireless/iwlwifi/iwl-led.c: printk fix ia64: drivers/net/wireless/iwlwifi/iwl-led.c: In function `iwl_get_blink_rate': drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, s64 arg (arg 6) drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, u64 arg (arg 7) We do not know what type the architecture uses to impement u64 and s64, hence we must cast the variables for printing. Cc: Tomas Winkler Cc: John W. Linville Cc: Zhu Yi Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-led.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 899d7a2..61250e6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) if (tpt < 0) /* wrapparound */ tpt = -tpt; - IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt); + IWL_DEBUG_LED("tpt %lld current_tpt %llu\n", + (long long)tpt, + (unsigned long long)current_tpt); priv->led_tpt = current_tpt; if (!priv->allow_blinking) -- cgit v1.1 From 0b06b2ae0e474fc6378117c832bcd94785a9e975 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 23 Jul 2008 18:36:38 -0700 Subject: mac80211: fix sparse integer as NULL pointer warning drivers/net/wireless/mac80211_hwsim.c:503:20: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 5816230..248d31a 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -500,7 +500,7 @@ failed_hw: device_unregister(data->dev); failed_drvdata: ieee80211_free_hw(hw); - hwsim_radios[i] = 0; + hwsim_radios[i] = NULL; failed: mac80211_hwsim_free(); return err; -- cgit v1.1 From 5422399518e8142198df888aab00acdac251f754 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Thu, 24 Jul 2008 10:40:37 +0300 Subject: mac80211: append CONFIG_ to MAC80211_VERBOSE_PS_DEBUG in net/mac80211/tx.c. In net/mac80211/tx.c, there are some #ifdef which checks MAC80211_VERBOSE_PS_DEBUG (which in fact is never set) instead of CONFIG_MAC80211_VERBOSE_PS_DEBUG, as should be. This patch replaces MAC80211_VERBOSE_PS_DEBUG with CONFIG_MAC80211_VERBOSE_PS_DEBUG in these #ifdef commands in net/mac80211/tx.c. Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- net/mac80211/tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7e99d16..c5f7805 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) rcu_read_unlock(); local->total_ps_buffered = total; -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", wiphy_name(local->hw.wiphy), purged); #endif @@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= AP_MAX_BC_BUFFER) { -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: BC TX buffer full - " "dropping the oldest frame\n", @@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: STA %s TX " "buffer full - dropping oldest frame\n", -- cgit v1.1 From 1f690d7b549ef9c7424536475501885dd5b54930 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 28 Jul 2008 22:08:18 -0500 Subject: rtl8187: Fix for TX sequence number problem "mac80211: fix TX sequence numbers" broke rtl8187. This patch makes the same kind of fix that was done for rt2x00. Note that this code will have to be reworked for proper sequence numbers on beacons. In addition, the sequence number has been placed in the hardware state, not the vif state. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 1 + drivers/net/wireless/rtl8187_dev.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 3afb49f..8961901 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -100,6 +100,7 @@ struct rtl8187_priv { struct usb_device *udev; u32 rx_conf; u16 txpwr_base; + u16 seqno; u8 asic_rev; u8 is_rtl8187b; enum { diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index d3067b1..7ff03ac 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { struct rtl8187_priv *priv = dev->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; unsigned int ep; void *buf; struct urb *urb; @@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) ep = epmap[skb_get_queue_mapping(skb)]; } + /* FIXME: The sequence that follows is needed for this driver to + * work with mac80211 since "mac80211: fix TX sequence numbers". + * As with the temporary code in rt2x00, changes will be needed + * to get proper sequence numbers on beacons. In addition, this + * patch places the sequence number in the hardware state, which + * limits us to a single virtual state. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + info->driver_data[0] = dev; info->driver_data[1] = urb; -- cgit v1.1 From 0ccd58fc03f40529f66190b1a41e92a732d2bda8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 28 Jul 2008 22:25:08 -0500 Subject: rtl8187: Improve wireless statistics for RTL8187B Wireless statistics produced by the RTL8187B driver are not particularly informative about the strength of the received signal. From the data sheet provided by Realtek, I discovered that certain parts of the RX header should have the information necessary to calculate signal quality and strength. With testing, it became clear that most of these quantities were very jittery - only the AGC correlated with the signals expected from nearby AP's. As a result, the quality and strength are derived from the agc value. The scaling has been determined so that the numbers are close to those obtained by b43 under the same conditions. The results are qualitatively correct. Statistics derived for the RTL8187 have not been changed. The RX header variables have been renamed to match the quantites described in the Realtek data sheet. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 10 +++-- drivers/net/wireless/rtl8187_dev.c | 78 +++++++++++++++++++++++--------------- 2 files changed, 54 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 8961901..1b0d750 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -47,11 +47,13 @@ struct rtl8187_rx_hdr { struct rtl8187b_rx_hdr { __le32 flags; __le64 mac_time; - u8 noise; - u8 signal; + u8 sq; + u8 rssi; u8 agc; - u8 reserved; - __le32 unused; + u8 flags2; + __le16 snr_long2end; + s8 pwdb_g12; + u8 fot; } __attribute__((packed)); /* {rtl8187,rtl8187b}_tx_info is in skb */ diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 7ff03ac..177988e 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -272,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb) struct ieee80211_rx_status rx_status = { 0 }; int rate, signal; u32 flags; + u32 quality; spin_lock(&priv->rx_queue.lock); if (skb->next) @@ -295,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb) flags = le32_to_cpu(hdr->flags); signal = hdr->signal & 0x7f; rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = signal; rx_status.noise = hdr->noise; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = signal; priv->quality = signal; + rx_status.qual = priv->quality; priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; + if (rate > 3) { /* OFDM rate */ + if (signal > 90) + signal = 90; + else if (signal < 25) + signal = 25; + signal = 90 - signal; + } else { /* CCK rate */ + if (signal > 95) + signal = 95; + else if (signal < 30) + signal = 30; + signal = 95 - signal; + } + rx_status.signal = signal; + priv->signal = signal; } else { struct rtl8187b_rx_hdr *hdr = (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); + /* The Realtek datasheet for the RTL8187B shows that the RX + * header contains the following quantities: signal quality, + * RSSI, AGC, the received power in dB, and the measured SNR. + * In testing, none of these quantities show qualitative + * agreement with AP signal strength, except for the AGC, + * which is inversely proportional to the strength of the + * signal. In the following, the quality and signal strength + * are derived from the AGC. The arbitrary scaling constants + * are chosen to make the results close to the values obtained + * for a BCM4312 using b43 as the driver. The noise is ignored + * for now. + */ flags = le32_to_cpu(hdr->flags); - signal = hdr->agc >> 1; - rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = 64 - min(hdr->noise, (u8)64); - rx_status.noise = hdr->noise; + quality = 170 - hdr->agc; + if (quality > 100) + quality = 100; + signal = 14 - hdr->agc / 2; + rx_status.qual = quality; + priv->quality = quality; + rx_status.signal = signal; + priv->signal = signal; + rx_status.antenna = (hdr->rssi >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = hdr->signal; - priv->quality = hdr->agc >> 1; - priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; } skb_trim(skb, flags & 0x0FFF); - rate = (flags >> 20) & 0xF; - if (rate > 3) { /* OFDM rate */ - if (signal > 90) - signal = 90; - else if (signal < 25) - signal = 25; - signal = 90 - signal; - } else { /* CCK rate */ - if (signal > 95) - signal = 95; - else if (signal < 30) - signal = 30; - signal = 95 - signal; - } - - rx_status.qual = priv->quality; - rx_status.signal = signal; rx_status.rate_idx = rate; rx_status.freq = dev->conf.channel->center_freq; rx_status.band = dev->conf.channel->band; @@ -1030,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv->mode = IEEE80211_IF_TYPE_MNTR; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - dev->max_signal = 65; + IEEE80211_HW_RX_INCLUDES_FCS; eeprom.data = dev; eeprom.register_read = rtl8187_eeprom_register_read; @@ -1147,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, (*channel++).hw_value = txpwr >> 8; } - if (priv->is_rtl8187b) + if (priv->is_rtl8187b) { printk(KERN_WARNING "rtl8187: 8187B chip detected. Support " "is EXPERIMENTAL, and could damage your\n" " hardware, use at your own risk\n"); + dev->flags |= IEEE80211_HW_SIGNAL_DBM; + } else { + dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC; + dev->max_signal = 65; + } + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) printk(KERN_INFO "rtl8187: inconsistency between id with OEM" " info!\n"); -- cgit v1.1 From d0f09804144fd9471a13cf4d80e66842c7fa114f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 11:32:07 +0200 Subject: mac80211: partially fix skb->cb use This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 2 +- drivers/net/wireless/b43/xmit.c | 2 +- drivers/net/wireless/b43legacy/xmit.c | 2 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +- include/linux/skbuff.h | 5 ++- include/net/mac80211.h | 6 ---- net/core/skbuff.c | 3 ++ net/mac80211/main.c | 8 +---- net/mac80211/mlme.c | 8 ++--- net/mac80211/tx.c | 47 +++++++++++++---------------- net/mac80211/wme.c | 3 ++ 13 files changed, 40 insertions(+), 52 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 1106d1c..ff3fad7 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1237,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) pktlen = skb->len; - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) { + if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; pktlen += info->control.icv_len; } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 8d54502..9dda816 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, const struct b43_phy *phy = &dev->phy; const struct ieee80211_hdr *wlhdr = (const struct ieee80211_hdr *)fragment_data; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; __le16 fctl = wlhdr->frame_control; struct ieee80211_rate *fbrate; u8 rate, rate_fb; diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index e969ed8..68e1f8c 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, u16 cookie) { const struct ieee80211_hdr *wlhdr; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; u16 fctl; u8 rate; struct ieee80211_rate *rate_fb; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 9b50b10..f72cd0b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) * first entry */ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 05121f3..7c82ecf 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) * first entry */ iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0); /* Set up TFD's 2nd entry to point directly to remainder of skb, diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 042ab00..c3ee4ec 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7ea44f6..a640385 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -316,7 +316,10 @@ struct sk_buff { #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif - /* 14 bit hole */ +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + __u8 do_not_encrypt:1; +#endif + /* 0/13/14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 74487f2..b527210 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -206,8 +206,6 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., * for combined 802.11g / 802.11b networks) @@ -220,7 +218,6 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the * through set_retry_limit configured long retry value - * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number @@ -253,7 +250,6 @@ struct ieee80211_bss_conf { */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), IEEE80211_TX_CTL_NO_ACK = BIT(4), @@ -263,7 +259,6 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), IEEE80211_TX_CTL_AMPDU = BIT(13), IEEE80211_TX_CTL_OFDM_HT = BIT(14), @@ -323,7 +318,6 @@ struct ieee80211_tx_info { struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; unsigned long jiffies; - int ifindex; u16 aid; s8 rts_cts_rate_idx, alt_retry_rate_idx; u8 retry_limit; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4e0c922..8464017 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) C(head); C(data); C(truesize); +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + C(do_not_encrypt); +#endif atomic_set(&n->users, 1); atomic_inc(&(skb_shinfo(skb)->dataref)); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b5830f7..a4c5b90 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data) /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to * make a prepared TX frame (one that has been given to hw) to look like brand * new IEEE 802.11 frame that is ready to go through TX processing again. - * Also, tx_packet_data in cb is restored from tx_control. */ + */ static void ieee80211_remove_tx_extra(struct ieee80211_local *local, struct ieee80211_key *key, struct sk_buff *skb) { int hdrlen, iv_len, mic_len; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_CTL_DO_NOT_ENCRYPT | - IEEE80211_TX_CTL_REQUEUE | - IEEE80211_TX_CTL_EAPOL_FRAME; hdrlen = ieee80211_get_hdrlen_from_skb(skb); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d7c371e..35eb767 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, int encrypt) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_tx_info *info; sdata = IEEE80211_DEV_TO_SUB_IF(dev); skb->dev = sdata->local->mdev; @@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, skb_set_network_header(skb, 0); skb_set_transport_header(skb, 0); - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(struct ieee80211_tx_info)); - info->control.ifindex = sdata->dev->ifindex; - if (!encrypt) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->iif = sdata->dev->ifindex; + skb->do_not_encrypt = !encrypt; dev_queue_xmit(skb); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c5f7805..69019e9 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); u16 fc = tx->fc; - if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (unlikely(tx->skb->do_not_encrypt)) tx->key = NULL; else if (tx->sta && (key = rcu_dereference(tx->sta->key))) tx->key = key; else if ((key = rcu_dereference(tx->sdata->default_key))) tx->key = key; else if (tx->sdata->drop_unencrypted && - !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) && + (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) && !(info->flags & IEEE80211_TX_CTL_INJECTED)) { I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); return TX_DROP; @@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) } if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 1; return TX_CONTINUE; } @@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) memcpy(skb_put(frag, copylen), pos, copylen); memcpy(frag->cb, first->cb, sizeof(frag->cb)); skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; left -= copylen; @@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, sband = tx->local->hw.wiphy->bands[tx->channel->band]; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->do_not_encrypt = 1; info->flags |= IEEE80211_TX_CTL_INJECTED; tx->flags &= ~IEEE80211_TX_FRAGMENTED; @@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, skb_trim(skb, skb->len - FCS_LEN); } if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) - info->flags &= - ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 0; if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) tx->flags |= IEEE80211_TX_FRAGMENTED; break; @@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx, struct sk_buff *skb, struct net_device *mdev) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct net_device *dev; - dev = dev_get_by_index(&init_net, info->control.ifindex); + dev = dev_get_by_index(&init_net, skb->iif); if (unlikely(dev && !is_ieee80211_device(dev, mdev))) { dev_put(dev); dev = NULL; @@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, bool may_encrypt; int ret; - if (info->control.ifindex) - odev = dev_get_by_index(&init_net, info->control.ifindex); + if (skb->iif) + odev = dev_get_by_index(&init_net, skb->iif); if (unlikely(odev && !is_ieee80211_device(odev, dev))) { dev_put(odev); odev = NULL; @@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, return 0; } + memset(info, 0, sizeof(*info)); + + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + osdata = IEEE80211_DEV_TO_SUB_IF(odev); - may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT); + may_encrypt = !skb->do_not_encrypt; headroom = osdata->local->tx_headroom; if (may_encrypt) @@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_radiotap_header *prthdr = (struct ieee80211_radiotap_header *)skb->data; u16 len_rthdr; @@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, skb->dev = local->mdev; /* needed because we set skb device to master */ - info->control.ifindex = dev->ifindex; + skb->iif = dev->ifindex; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + /* sometimes we do encrypt injected frames, will be fixed + * up in radiotap parser if not wanted */ + skb->do_not_encrypt = 0; /* * fix up the pointers accounting for the radiotap @@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info; struct ieee80211_sub_if_data *sdata; int ret = 1, head_need; u16 ethertype, hdrlen, meshhdrlen = 0; @@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, nh_pos += hdrlen; h_pos += hdrlen; - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(*info)); - info->control.ifindex = dev->ifindex; - if (ethertype == ETH_P_PAE) - info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME; - - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + skb->iif = dev->ifindex; skb->dev = local->mdev; dev->stats.tx_packets++; @@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info = IEEE80211_SKB_CB(skb); + skb->do_not_encrypt = 1; + info->band = band; rate_control_get_rate(local->mdev, sband, skb, &rsel); @@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; if (sdata->bss_conf.use_short_preamble && diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 07edda0..28437f0 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, { int i; + /* XXX: currently broken due to cb/requeue use */ + return -EPERM; + /* prepare the filter and save it for the SW queue * matching the received HW queue */ -- cgit v1.1 From bba95fefb8e31f4799652666d05a4a9aad56e492 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 13:22:51 +0200 Subject: nl80211: fix dump callbacks Julius Volz pointed out that the dump callbacks in nl80211 were broken and fixed one of them. This patch fixes the other three and also addresses the TODOs there. Signed-off-by: Johannes Berg Cc: Julius Volz Cc: Thomas Graf Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 275 +++++++++++++++++++++++++++---------------------- 1 file changed, 153 insertions(+), 122 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b7fefff..59eb2cf 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = { }; /* internal helper: get drv and dev */ -static int get_drv_dev_by_info_ifindex(struct genl_info *info, +static int get_drv_dev_by_info_ifindex(struct nlattr **attrs, struct cfg80211_registered_device **drv, struct net_device **dev) { int ifindex; - if (!info->attrs[NL80211_ATTR_IFINDEX]) + if (!attrs[NL80211_ATTR_IFINDEX]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]); + ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]); *dev = dev_get_by_index(&init_net, ifindex); if (!*dev) return -ENODEV; @@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * mutex_lock(&cfg80211_drv_mutex); list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (++wp_idx < wp_start) + if (wp_idx < wp_start) { + wp_idx++; continue; + } if_idx = 0; mutex_lock(&dev->devlist_mtx); list_for_each_entry(wdev, &dev->netdev_list, list) { - if (++if_idx < if_start) + if (if_idx < if_start) { + if_idx++; continue; + } if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev) < 0) - break; + wdev->netdev) < 0) { + mutex_unlock(&dev->devlist_mtx); + goto out; + } + if_idx++; } mutex_unlock(&dev->devlist_mtx); + + wp_idx++; } + out: mutex_unlock(&cfg80211_drv_mutex); cb->args[0] = wp_idx; @@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info) struct net_device *netdev; int err; - err = get_drv_dev_by_info_ifindex(info, &dev, &netdev); + err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev); if (err) return err; @@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) } else return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info) int ifindex, err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NL80211_ATTR_KEY_DEFAULT]) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) struct beacon_parameters params; int haveinfo = 0; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info) int err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_station(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct station_info sinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 mac_addr[ETH_ALEN]; + int ifidx = cb->args[0]; + int sta_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_station) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx, + mac_addr, &sinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_station) - continue; + if (nl80211_send_station(skb, + NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, mac_addr, + &sinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_station(&dev->wiphy, - wdev->netdev, sta_idx, mac_addr, - &sinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_station(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, mac_addr, - &sinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + sta_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = sta_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) @@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_action = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) ¶ms.station_flags)) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_mpath(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct mpath_info pinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 dst[ETH_ALEN]; u8 next_hop[ETH_ALEN]; + int ifidx = cb->args[0]; + int path_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_mpath) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx, + dst, next_hop, &pinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_mpath) - continue; + if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, dst, next_hop, + &pinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_mpath(&dev->wiphy, - wdev->netdev, sta_idx, dst, - next_hop, &pinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_mpath(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, dst, next_hop, - &pinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + path_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = path_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) @@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; -- cgit v1.1 From 14db74bcc3f7a779cf395a47e26b06a28207571a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 13:22:52 +0200 Subject: mac80211: fix cfg80211 hooks for master interface The master interface is a virtual interface that is registered to mac80211, changing that does not seem like a good idea at the moment. However, since it has no sdata, we cannot accept any configuration for it. This patch makes the cfg80211 hooks reject any such attempt. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 103 +++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 88 insertions(+), 15 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8e7ba0e..297c257 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct net_device *dev; enum ieee80211_if_types itype; struct ieee80211_sub_if_data *sdata; @@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, if (itype == IEEE80211_IF_TYPE_INVALID) return -EINVAL; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); ret = ieee80211_if_change_type(sdata, itype); @@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr, struct key_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; enum ieee80211_key_alg alg; struct ieee80211_key *key; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); switch (params->cipher) { @@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta; int ret; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); @@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, void (*callback)(void *cookie, struct key_params *params)) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; u8 seq[6] = {0}; struct key_params params; @@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, u16 iv16; int err = -ENOENT; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + rcu_read_lock(); if (mac_addr) { @@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; + if (dev == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local, static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *sdata; int err; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + /* Prevent a race with changing the rate control algorithm */ if (!netif_running(dev)) return -ENETDOWN; @@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - struct ieee80211_local *local = sdata->local; + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (mac) { rcu_read_lock(); @@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *vlansdata; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); /* XXX: get sta belonging to dev */ @@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -EINVAL; } - sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); + sta->sdata = vlansdata; ieee80211_send_layer2_update(sta); } @@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy, static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; -- cgit v1.1 From 77bbadd5ea893f364a0d1879723037678a03725c Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 29 Jul 2008 13:31:47 +0200 Subject: PS3: gelic: use unsigned long for irqflags The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> This patch was generated using the Coccinelle framework. Cc: Masakazu Mokuno Cc: Julia Lawall Cc: Alexey Dobriyan Signed-off-by: Vegard Nossum Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 6b2dee0..a834b52 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index, index_specified; int ret = 0; @@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev, { struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; - unsigned int irqflag; + unsigned long irqflag; unsigned int key_index, index_specified; int ret = 0; @@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; __u16 alg; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; @@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; int max_key_len; @@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); unsigned int len; - unsigned int irqflag; + unsigned long irqflag; int ret = 0; pr_debug("%s:<- len=%d\n", __func__, data->data.length); @@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); char *p; - unsigned int irqflag; + unsigned long irqflag; unsigned int i; pr_debug("%s:<-\n", __func__); -- cgit v1.1 From 56a6d13dfd49d90d72a1a962246206719dd9d143 Mon Sep 17 00:00:00 2001 From: Luis Carlos Cobo Date: Tue, 29 Jul 2008 19:59:31 +0200 Subject: mac80211: fix mesh beaconing This patch fixes mesh beaconing, which was broken by "mac80211: revamp beacon configuration". Signed-off-by: Luis Carlos Cobo Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 35eb767..acb0413 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3299,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev) ifsta = &sdata->u.sta; ifsta->state = IEEE80211_MESH_UP; ieee80211_sta_timer((unsigned long)sdata); + ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); } #endif -- cgit v1.1 From 4a36702e016947a0ce6c0c024673bb5b16d3f618 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 29 Jul 2008 23:57:58 -0700 Subject: IPv6: datagram_send_ctl() should exit immediately when an error occured When an error occured, datagram_send_ctl() should exit immediately rather than continue to run the for loop. Otherwise, the variable err might be changed and the error might be hidden. Fix this bug by using "goto" instead of "break". Signed-off-by: Miao Xie Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index f7b535d..410046a 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net, LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n", cmsg->cmsg_type); err = -EINVAL; - break; + goto exit_f; } } -- cgit v1.1 From 38c080ffa9c1b840390832b42ce8621464ab9f97 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 29 Jul 2008 23:59:20 -0700 Subject: niu: Fix error checking in niu_ethflow_to_class. The callers of niu_ethflow_to_class expect zero as error, but it returns -1 instead. Signed-off-by: Andreas Schwab Signed-off-by: David S. Miller --- drivers/net/niu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 8ee7d7b..e4765b7 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class) *class = CLASS_CODE_SCTP_IPV6; break; default: - return -1; + return 0; } return 1; -- cgit v1.1 From 8d50b53d66a8a6ae41bafbdcabe401467803f33a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 02:37:46 -0700 Subject: pkt_sched: Fix OOPS on ingress qdisc add. Bug report from Steven Jan Springl: Issuing the following command causes a kernel oops: tc qdisc add dev eth0 handle ffff: ingress The problem mostly stems from all of the special case handling of ingress qdiscs. So, to fix this, do the grafting operation the same way we do for TX qdiscs. Which means that dev_activate() and dev_deactivate() now do the "qdisc_sleeping <--> qdisc" transitions on dev->rx_queue too. Future simplifications are possible now, mainly because it is impossible for dev_queue->{qdisc,qdisc_sleeping} to be NULL. There are NULL checks all over to handle the ingress qdisc special case that used to exist before this commit. Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++-- net/sched/sch_api.c | 57 ++++++++++++++----------------------------------- net/sched/sch_generic.c | 8 ++++--- 3 files changed, 23 insertions(+), 46 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8d13a9b..63d6bcd 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2100,7 +2100,7 @@ static int ing_filter(struct sk_buff *skb) rxq = &dev->rx_queue; q = rxq->qdisc; - if (q) { + if (q != &noop_qdisc) { spin_lock(qdisc_lock(q)); result = qdisc_enqueue_root(skb, q); spin_unlock(qdisc_lock(q)); @@ -2113,7 +2113,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb, struct packet_type **pt_prev, int *ret, struct net_device *orig_dev) { - if (!skb->dev->rx_queue.qdisc) + if (skb->dev->rx_queue.qdisc == &noop_qdisc) goto out; if (*pt_prev) { diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index b060164..4840aff 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -572,44 +572,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev) static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, struct Qdisc *qdisc) { + struct Qdisc *oqdisc = dev_queue->qdisc_sleeping; spinlock_t *root_lock; - struct Qdisc *oqdisc; - int ingress; - - ingress = 0; - if (qdisc && qdisc->flags&TCQ_F_INGRESS) - ingress = 1; - - if (ingress) { - oqdisc = dev_queue->qdisc; - } else { - oqdisc = dev_queue->qdisc_sleeping; - } root_lock = qdisc_root_lock(oqdisc); spin_lock_bh(root_lock); - if (ingress) { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) { - /* delete */ - qdisc_reset(oqdisc); - dev_queue->qdisc = NULL; - } else { /* new */ - dev_queue->qdisc = qdisc; - } + /* Prune old scheduler */ + if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) + qdisc_reset(oqdisc); - } else { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) - qdisc_reset(oqdisc); - - /* ... and graft new one */ - if (qdisc == NULL) - qdisc = &noop_qdisc; - dev_queue->qdisc_sleeping = qdisc; - dev_queue->qdisc = &noop_qdisc; - } + /* ... and graft new one */ + if (qdisc == NULL) + qdisc = &noop_qdisc; + dev_queue->qdisc_sleeping = qdisc; + dev_queue->qdisc = &noop_qdisc; spin_unlock_bh(root_lock); @@ -678,7 +655,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, ingress = 0; num_q = dev->num_tx_queues; - if (q && q->flags & TCQ_F_INGRESS) { + if ((q && q->flags & TCQ_F_INGRESS) || + (new && new->flags & TCQ_F_INGRESS)) { num_q = 1; ingress = 1; } @@ -692,13 +670,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, if (!ingress) dev_queue = netdev_get_tx_queue(dev, i); - if (ingress) { - old = dev_graft_qdisc(dev_queue, q); - } else { - old = dev_graft_qdisc(dev_queue, new); - if (new && i > 0) - atomic_inc(&new->refcnt); - } + old = dev_graft_qdisc(dev_queue, new); + if (new && i > 0) + atomic_inc(&new->refcnt); + notify_and_destroy(skb, n, classid, old, new); } @@ -817,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, goto err_out3; } } - if (parent) + if (parent && !(sch->flags & TCQ_F_INGRESS)) list_add_tail(&sch->list, &dev_queue->qdisc->list); return sch; diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index fd2a6ca..345838a 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -596,7 +596,7 @@ static void transition_one_qdisc(struct net_device *dev, int *need_watchdog_p = _need_watchdog; rcu_assign_pointer(dev_queue->qdisc, new_qdisc); - if (new_qdisc != &noqueue_qdisc) + if (need_watchdog_p && new_qdisc != &noqueue_qdisc) *need_watchdog_p = 1; } @@ -619,6 +619,7 @@ void dev_activate(struct net_device *dev) need_watchdog = 0; netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog); + transition_one_qdisc(dev, &dev->rx_queue, NULL); if (need_watchdog) { dev->trans_start = jiffies; @@ -677,6 +678,7 @@ void dev_deactivate(struct net_device *dev) bool running; netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc); + dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc); dev_watchdog_down(dev); @@ -718,7 +720,7 @@ static void dev_init_scheduler_queue(struct net_device *dev, void dev_init_scheduler(struct net_device *dev) { netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc); - dev_init_scheduler_queue(dev, &dev->rx_queue, NULL); + dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev); } @@ -745,6 +747,6 @@ static void shutdown_scheduler_queue(struct net_device *dev, void dev_shutdown(struct net_device *dev) { netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); - shutdown_scheduler_queue(dev, &dev->rx_queue, NULL); + shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); WARN_ON(timer_pending(&dev->watchdog_timer)); } -- cgit v1.1 From 785957d3e8c6fb37b18bf671923a76dbd8240025 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 03:03:15 -0700 Subject: tcp: MD5: Use MIB counter instead of warning for MD5 mismatch. From a report by Matti Aarnio, and preliminary patch by Adam Langley. Signed-off-by: David S. Miller --- include/linux/snmp.h | 2 ++ net/ipv4/proc.c | 2 ++ net/ipv4/tcp_ipv4.c | 10 ++-------- net/ipv6/tcp_ipv6.c | 27 ++++++++------------------- 4 files changed, 14 insertions(+), 27 deletions(-) diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 5df62ef..7a6e6bb 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -214,6 +214,8 @@ enum LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */ LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */ LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ + LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ + LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ __LINUX_MIB_MAX }; diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 834356e..8f5a403 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD), SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO), SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS), + SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND), + SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED), SNMP_MIB_SENTINEL }; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a2b06d0..b3875c0 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb) return 0; if (hash_expected && !hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } if (!hash_expected && hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index cff778b..1db4521 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -849,28 +849,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb) hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr); hash_location = tcp_parse_md5sig_option(th); - /* do we have a hash as expected? */ - if (!hash_expected) { - if (!hash_location) - return 0; - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + /* We've parsed the options - do we have a hash? */ + if (!hash_expected && !hash_location) + return 0; + + if (hash_expected && !hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } - if (!hash_location) { - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + if (!hash_expected && hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } -- cgit v1.1 From 17ef51fce03758736e9051c4360eca237dd0aaeb Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Wed, 30 Jul 2008 03:12:31 -0700 Subject: ipv6: Fix useless proc net sockstat6 removal This call is no longer needed, sockstat6 is per namespace so it is removed at the namespace subsystem destruction. Signed-off-by: Daniel Lezcano Signed-off-by: David S. Miller --- net/ipv6/proc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f82f607..0179b66 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -286,7 +286,6 @@ proc_net_fail: void ipv6_misc_proc_exit(void) { - proc_net_remove(&init_net, "sockstat6"); proc_net_remove(&init_net, "dev_snmp6"); proc_net_remove(&init_net, "snmp6"); unregister_pernet_subsys(&ipv6_proc_ops); -- cgit v1.1 From 031cf19e6f63941506c9baf76ac7adac06edcf08 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 30 Jul 2008 03:14:01 -0700 Subject: net: Make "networking" one-click deselectable. Use a menuconfig directive to make all of networking support one-click deselectable from the top-level menu. Signed-off-by: Robert P. J. Day Signed-off-by: David S. Miller --- net/Kconfig | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/Kconfig b/net/Kconfig index b986687..7612cc8 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -2,9 +2,7 @@ # Network configuration # -menu "Networking" - -config NET +menuconfig NET bool "Networking support" ---help--- Unless you really know what you are doing, you should say Y here. @@ -22,7 +20,6 @@ config NET recommended to read the NET-HOWTO, available from . -# Make sure that all config symbols are dependent on NET if NET menu "Networking options" @@ -252,5 +249,3 @@ source "net/rfkill/Kconfig" source "net/9p/Kconfig" endif # if NET -endmenu # Networking - -- cgit v1.1