From ea266ba1591d28889645a245e1df6f889c574640 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 17 Feb 2007 02:40:22 +0100 Subject: sl82c105: DMA support fixes Fix a number of issues with the DMA support code: - driver claims support for all SW/MW DMA modes while supporting only MWDMA2; - ide_dma_check() method tries to enable DMA on the "known good" drives which don't support MWDMA2; - ide_dma_on() method upon failure to set drive to MWDMA2 re-tunes already tuned PIO mode and calls ide_dma_off() method instead of returning error; - ide_dma_off() method sets drive->current_speed while it doesn't actually change (only the PIO timings are re-loaded into the chip's registers); - init_hwif() method forcibly sets/resets both "drive DMA capable" bits while this is properly handled by ide_dma_{on,off}() methods being called later... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sl82c105.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 170a261..1cb8afe 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -164,7 +164,7 @@ static int sl82c105_check_drive (ide_drive_t *drive) return hwif->ide_dma_on(drive); } - if (__ide_dma_good_drive(drive)) + if (__ide_dma_good_drive(drive) && id->eide_dma_time < 150) return hwif->ide_dma_on(drive); } while (0); @@ -259,10 +259,8 @@ static int sl82c105_ide_dma_on (ide_drive_t *drive) { DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name)); - if (config_for_dma(drive)) { - config_for_pio(drive, 4, 0, 0); - return HWIF(drive)->ide_dma_off_quietly(drive); - } + if (config_for_dma(drive)) + return 1; printk(KERN_INFO "%s: DMA enabled\n", drive->name); return __ide_dma_on(drive); } @@ -278,7 +276,6 @@ static int sl82c105_ide_dma_off_quietly (ide_drive_t *drive) if (drive->pio_speed) speed = drive->pio_speed - XFER_PIO_0; config_for_pio(drive, speed, 0, 1); - drive->current_speed = drive->pio_speed; return rc; } @@ -401,11 +398,9 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c /* * Initialise the chip */ - static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { unsigned int rev; - u8 dma_state; DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); @@ -431,7 +426,6 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) if (!hwif->dma_base) return; - dma_state = hwif->INB(hwif->dma_base + 2) & ~0x60; rev = sl82c105_bridge_revision(hwif->pci_dev); if (rev <= 5) { /* @@ -441,11 +435,8 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n", hwif->name, rev); } else { - dma_state |= 0x60; - hwif->atapi_dma = 1; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; + hwif->mwdma_mask = 0x04; hwif->ide_dma_check = &sl82c105_check_drive; hwif->ide_dma_on = &sl82c105_ide_dma_on; @@ -462,7 +453,6 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) if (hwif->mate) hwif->serialized = hwif->mate->serialized = 1; } - hwif->OUTB(dma_state, hwif->dma_base + 2); } static ide_pci_device_t sl82c105_chipset __devinitdata = { -- cgit v1.1