From 8ebed854506301f4f67e75c73cae967d4a45ab4d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 9 Jul 2011 13:10:19 -0700 Subject: hwmon: (max16064) Add support for peak attributes Add support for voltage and temperature peak (historic maximum) attributes. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson --- Documentation/hwmon/max16064 | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/hwmon/max16064') diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index 4172899..f6e8bcb 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -50,6 +50,8 @@ in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-4]_highest Historical maximum voltage. +in[1-4]_reset_history Write any value to reset history. temp1_input Measured temperature. From READ_TEMPERATURE_1 register. temp1_max Maximum temperature. From OT_WARN_LIMIT register. @@ -60,3 +62,5 @@ temp1_max_alarm Chip temperature high alarm. Set by comparing temp1_crit_alarm Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set. +temp1_highest Historical maximum temperature. +temp1_reset_history Write any value to reset history. -- cgit v1.1