From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/networking/3c359.txt | 58 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/networking/3c359.txt (limited to 'Documentation/networking/3c359.txt') diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt new file mode 100644 index 0000000..4af8071 --- /dev/null +++ b/Documentation/networking/3c359.txt @@ -0,0 +1,58 @@ + +3COM PCI TOKEN LINK VELOCITY XL TOKEN RING CARDS README + +Release 0.9.0 - Release + Jul 17th 2000 Mike Phillips + + 1.2.0 - Final + Feb 17th 2002 Mike Phillips + Updated for submission to the 2.4.x kernel. + +Thanks: + Terry Murphy from 3Com for tech docs and support, + Adam D. Ligas for testing the driver. + +Note: + This driver will NOT work with the 3C339 Token Ring cards, you need +to use the tms380 driver instead. + +Options: + +The driver accepts three options: ringspeed, pkt_buf_sz and message_level. + +These options can be specified differently for each card found. + +ringspeed: Has one of three settings 0 (default), 4 or 16. 0 will +make the card autosense the ringspeed and join at the appropriate speed, +this will be the default option for most people. 4 or 16 allow you to +explicitly force the card to operate at a certain speed. The card will fail +if you try to insert it at the wrong speed. (Although some hubs will allow +this so be *very* careful). The main purpose for explicitly setting the ring +speed is for when the card is first on the ring. In autosense mode, if the card +cannot detect any active monitors on the ring it will open at the same speed as +its last opening. This can be hazardous if this speed does not match the speed +you want the ring to operate at. + +pkt_buf_sz: This is this initial receive buffer allocation size. This will +default to 4096 if no value is entered. You may increase performance of the +driver by setting this to a value larger than the network packet size, although +the driver now re-sizes buffers based on MTU settings as well. + +message_level: Controls level of messages created by the driver. Defaults to 0: +which only displays start-up and critical messages. Presently any non-zero +value will display all soft messages as well. NB This does not turn +debugging messages on, that must be done by modified the source code. + +Variable MTU size: + +The driver can handle a MTU size upto either 4500 or 18000 depending upon +ring speed. The driver also changes the size of the receive buffers as part +of the mtu re-sizing, so if you set mtu = 18000, you will need to be able +to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring +position = 296,000 bytes of memory space, plus of course anything +necessary for the tx sk_buff's. Remember this is per card, so if you are +building routers, gateway's etc, you could start to use a lot of memory +real fast. + +2/17/02 Mike Phillips + -- cgit v1.1