From a32fe93daf9c6b6ffbab1d9b9e2a8e4c335bda5c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 27 Apr 2010 22:13:34 +0000 Subject: powerpc/4xx: Add optional "reset_type" property to control reboot via dts By setting "reset_type" to one of the following values, the default software reset mechanism may be overidden. Here the possible values of "reset_type": 1 - PPC4xx core reset 2 - PPC4xx chip reset 3 - PPC4xx system reset (default) This will be used by a new PPC440SPe board port, which needs a "chip reset" instead of the default "system reset" to be asserted. Signed-off-by: Stefan Roese Cc: Josh Boyer Cc: Benjamin Herrenschmidt Acked-by: Josh Boyer Signed-off-by: Josh Boyer --- Documentation/powerpc/dts-bindings/4xx/reboot.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/powerpc/dts-bindings/4xx/reboot.txt (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/dts-bindings/4xx/reboot.txt b/Documentation/powerpc/dts-bindings/4xx/reboot.txt new file mode 100644 index 0000000..d721726 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/4xx/reboot.txt @@ -0,0 +1,18 @@ +Reboot property to control system reboot on PPC4xx systems: + +By setting "reset_type" to one of the following values, the default +software reset mechanism may be overidden. Here the possible values of +"reset_type": + + 1 - PPC4xx core reset + 2 - PPC4xx chip reset + 3 - PPC4xx system reset (default) + +Example: + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + ... + reset-type = <2>; /* Use chip-reset */ + }; -- cgit v1.1