From c24b720188e9a1f83caa5b6d49b4cb5b843256f1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 13 Apr 2009 14:40:01 -0700 Subject: mm: reformat the Unevictable-LRU documentation Do a bit of reformatting on the Unevictable-LRU documentation. Signed-off-by: David Howells Acked-by: Lee Schermerhorn Cc: Rik van Riel Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/unevictable-lru.txt | 1041 +++++++++++++++++++--------------- 1 file changed, 572 insertions(+), 469 deletions(-) (limited to 'Documentation/vm/unevictable-lru.txt') diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 0706a72..2d70d0d 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -1,588 +1,691 @@ - -This document describes the Linux memory management "Unevictable LRU" -infrastructure and the use of this infrastructure to manage several types -of "unevictable" pages. The document attempts to provide the overall -rationale behind this mechanism and the rationale for some of the design -decisions that drove the implementation. The latter design rationale is -discussed in the context of an implementation description. Admittedly, one -can obtain the implementation details--the "what does it do?"--by reading the -code. One hopes that the descriptions below add value by provide the answer -to "why does it do that?". - -Unevictable LRU Infrastructure: - -The Unevictable LRU adds an additional LRU list to track unevictable pages -and to hide these pages from vmscan. This mechanism is based on a patch by -Larry Woodman of Red Hat to address several scalability problems with page + ============================== + UNEVICTABLE LRU INFRASTRUCTURE + ============================== + +======== +CONTENTS +======== + + (*) The Unevictable LRU + + - The unevictable page list. + - Memory control group interaction. + - Marking address spaces unevictable. + - Detecting Unevictable Pages. + - vmscan's handling of unevictable pages. + + (*) mlock()'d pages. + + - History. + - Basic management. + - mlock()/mlockall() system call handling. + - Filtering special vmas. + - munlock()/munlockall() system call handling. + - Migrating mlocked pages. + - mmap(MAP_LOCKED) system call handling. + - munmap()/exit()/exec() system call handling. + - try_to_unmap(). + - try_to_munlock() reverse map scan. + - Page reclaim in shrink_*_list(). + + +============ +INTRODUCTION +============ + +This document describes the Linux memory manager's "Unevictable LRU" +infrastructure and the use of this to manage several types of "unevictable" +pages. + +The document attempts to provide the overall rationale behind this mechanism +and the rationale for some of the design decisions that drove the +implementation. The latter design rationale is discussed in the context of an +implementation description. Admittedly, one can obtain the implementation +details - the "what does it do?" - by reading the code. One hopes that the +descriptions below add value by provide the answer to "why does it do that?". + + +=================== +THE UNEVICTABLE LRU +=================== + +The Unevictable LRU facility adds an additional LRU list to track unevictable +pages and to hide these pages from vmscan. This mechanism is based on a patch +by Larry Woodman of Red Hat to address several scalability problems with page reclaim in Linux. The problems have been observed at customer sites on large -memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB -of main memory will have over 32 million 4k pages in a single zone. When a -large fraction of these pages are not evictable for any reason [see below], -vmscan will spend a lot of time scanning the LRU lists looking for the small -fraction of pages that are evictable. This can result in a situation where -all cpus are spending 100% of their time in vmscan for hours or days on end, -with the system completely unresponsive. - -The Unevictable LRU infrastructure addresses the following classes of -unevictable pages: - -+ page owned by ramfs -+ page mapped into SHM_LOCKed shared memory regions -+ page mapped into VM_LOCKED [mlock()ed] vmas - -The infrastructure might be able to handle other conditions that make pages +memory x86_64 systems. + +To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of +main memory will have over 32 million 4k pages in a single zone. When a large +fraction of these pages are not evictable for any reason [see below], vmscan +will spend a lot of time scanning the LRU lists looking for the small fraction +of pages that are evictable. This can result in a situation where all CPUs are +spending 100% of their time in vmscan for hours or days on end, with the system +completely unresponsive. + +The unevictable list addresses the following classes of unevictable pages: + + (*) Those owned by ramfs. + + (*) Those mapped into SHM_LOCK'd shared memory regions. + + (*) Those mapped into VM_LOCKED [mlock()ed] VMAs. + +The infrastructure may also be able to handle other conditions that make pages unevictable, either by definition or by circumstance, in the future. -The Unevictable LRU List +THE UNEVICTABLE PAGE LIST +------------------------- The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list called the "unevictable" list and an associated page flag, PG_unevictable, to -indicate that the page is being managed on the unevictable list. The -PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active -flag in that it indicates on which LRU list a page resides when PG_lru is set. -The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU -Kconfig option. +indicate that the page is being managed on the unevictable list. + +The PG_unevictable flag is analogous to, and mutually exclusive with, the +PG_active flag in that it indicates on which LRU list a page resides when +PG_lru is set. The unevictable list is compile-time configurable based on the +UNEVICTABLE_LRU Kconfig option. The Unevictable LRU infrastructure maintains unevictable pages on an additional LRU list for a few reasons: -1) We get to "treat unevictable pages just like we treat other pages in the - system, which means we get to use the same code to manipulate them, the - same code to isolate them (for migrate, etc.), the same code to keep track - of the statistics, etc..." [Rik van Riel] + (1) We get to "treat unevictable pages just like we treat other pages in the + system - which means we get to use the same code to manipulate them, the + same code to isolate them (for migrate, etc.), the same code to keep track + of the statistics, etc..." [Rik van Riel] + + (2) We want to be able to migrate unevictable pages between nodes for memory + defragmentation, workload management and memory hotplug. The linux kernel + can only migrate pages that it can successfully isolate from the LRU + lists. If we were to maintain pages elsewhere than on an LRU-like list, + where they can be found by isolate_lru_page(), we would prevent their + migration, unless we reworked migration code to find the unevictable pages + itself. -2) We want to be able to migrate unevictable pages between nodes--for memory - defragmentation, workload management and memory hotplug. The linux kernel - can only migrate pages that it can successfully isolate from the lru lists. - If we were to maintain pages elsewise than on an lru-like list, where they - can be found by isolate_lru_page(), we would prevent their migration, unless - we reworked migration code to find the unevictable pages. +The unevictable list does not differentiate between file-backed and anonymous, +swap-backed pages. This differentiation is only important while the pages are, +in fact, evictable. -The unevictable LRU list does not differentiate between file backed and swap -backed [anon] pages. This differentiation is only important while the pages -are, in fact, evictable. +The unevictable list benefits from the "arrayification" of the per-zone LRU +lists and statistics originally proposed and posted by Christoph Lameter. -The unevictable LRU list benefits from the "arrayification" of the per-zone -LRU lists and statistics originally proposed and posted by Christoph Lameter. +The unevictable list does not use the LRU pagevec mechanism. Rather, +unevictable pages are placed directly on the page's zone's unevictable list +under the zone lru_lock. This allows us to prevent the stranding of pages on +the unevictable list when one task has the page isolated from the LRU and other +tasks are changing the "evictability" state of the page. -The unevictable list does not use the lru pagevec mechanism. Rather, -unevictable pages are placed directly on the page's zone's unevictable -list under the zone lru_lock. The reason for this is to prevent stranding -of pages on the unevictable list when one task has the page isolated from the -lru and other tasks are changing the "evictability" state of the page. +MEMORY CONTROL GROUP INTERACTION +-------------------------------- -Unevictable LRU and Memory Controller Interaction +The unevictable LRU facility interacts with the memory control group [aka +memory controller; see Documentation/cgroups/memory.txt] by extending the +lru_list enum. + +The memory controller data structure automatically gets a per-zone unevictable +list as a result of the "arrayification" of the per-zone LRU lists (one per +lru_list enum element). The memory controller tracks the movement of pages to +and from the unevictable list. -The memory controller data structure automatically gets a per zone unevictable -lru list as a result of the "arrayification" of the per-zone LRU lists. The -memory controller tracks the movement of pages to and from the unevictable list. When a memory control group comes under memory pressure, the controller will not attempt to reclaim pages on the unevictable list. This has a couple of -effects. Because the pages are "hidden" from reclaim on the unevictable list, -the reclaim process can be more efficient, dealing only with pages that have -a chance of being reclaimed. On the other hand, if too many of the pages -charged to the control group are unevictable, the evictable portion of the -working set of the tasks in the control group may not fit into the available -memory. This can cause the control group to thrash or to oom-kill tasks. - - -Unevictable LRU: Detecting Unevictable Pages - -The function page_evictable(page, vma) in vmscan.c determines whether a -page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions, -page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's -address space using a wrapper function. Wrapper functions are used to set, -clear and test the flag to reduce the requirement for #ifdef's throughout the -source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created. -This flag remains for the life of the inode. - -For shared memory regions, AS_UNEVICTABLE is set when an application -successfully SHM_LOCKs the region and is removed when the region is -SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page -tables for the region as does, for example, mlock(). So, we make no special -effort to push any pages in the SHM_LOCKed region to the unevictable list. -Vmscan will do this when/if it encounters the pages during reclaim. On -SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the -unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed -region is destroyed, the pages are also "rescued" from the unevictable list in -the process of freeing them. - -page_evictable() detects mlock()ed pages by testing an additional page flag, -PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a -non-NULL vma is supplied, page_evictable() will check whether the vma is +effects: + + (1) Because the pages are "hidden" from reclaim on the unevictable list, the + reclaim process can be more efficient, dealing only with pages that have a + chance of being reclaimed. + + (2) On the other hand, if too many of the pages charged to the control group + are unevictable, the evictable portion of the working set of the tasks in + the control group may not fit into the available memory. This can cause + the control group to thrash or to OOM-kill tasks. + + +MARKING ADDRESS SPACES UNEVICTABLE +---------------------------------- + +For facilities such as ramfs none of the pages attached to the address space +may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE +address space flag is provided, and this can be manipulated by a filesystem +using a number of wrapper functions: + + (*) void mapping_set_unevictable(struct address_space *mapping); + + Mark the address space as being completely unevictable. + + (*) void mapping_clear_unevictable(struct address_space *mapping); + + Mark the address space as being evictable. + + (*) int mapping_unevictable(struct address_space *mapping); + + Query the address space, and return true if it is completely + unevictable. + +These are currently used in two places in the kernel: + + (1) By ramfs to mark the address spaces of its inodes when they are created, + and this mark remains for the life of the inode. + + (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called. + + Note that SHM_LOCK is not required to page in the locked pages if they're + swapped out; the application must touch the pages manually if it wants to + ensure they're in memory. + + +DETECTING UNEVICTABLE PAGES +--------------------------- + +The function page_evictable() in vmscan.c determines whether a page is +evictable or not using the query function outlined above [see section "Marking +address spaces unevictable"] to check the AS_UNEVICTABLE flag. + +For address spaces that are so marked after being populated (as SHM regions +might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate +the page tables for the region as does, for example, mlock(), nor need it make +any special effort to push any pages in the SHM_LOCK'd area to the unevictable +list. Instead, vmscan will do this if and when it encounters the pages during +a reclamation scan. + +On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan +the pages in the region and "rescue" them from the unevictable list if no other +condition is keeping them unevictable. If an unevictable region is destroyed, +the pages are also "rescued" from the unevictable list in the process of +freeing them. + +page_evictable() also checks for mlocked pages by testing an additional page +flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked, +and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and update the appropriate statistics if the vma is VM_LOCKED. This method allows efficient "culling" of pages in the fault path that are being faulted in to -VM_LOCKED vmas. +VM_LOCKED VMAs. -Unevictable Pages and Vmscan [shrink_*_list()] +VMSCAN'S HANDLING OF UNEVICTABLE PAGES +-------------------------------------- If unevictable pages are culled in the fault path, or moved to the unevictable -list at mlock() or mmap() time, vmscan will never encounter the pages until -they have become evictable again, for example, via munlock() and have been -"rescued" from the unevictable list. However, there may be situations where we -decide, for the sake of expediency, to leave a unevictable page on one of the -regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for -such pages in all of the shrink_{active|inactive|page}_list() functions and -will "cull" such pages that it encounters--that is, it diverts those pages to -the unevictable list for the zone being scanned. - -There may be situations where a page is mapped into a VM_LOCKED vma, but the -page is not marked as PageMlocked. Such pages will make it all the way to +list at mlock() or mmap() time, vmscan will not encounter the pages until they +have become evictable again (via munlock() for example) and have been "rescued" +from the unevictable list. However, there may be situations where we decide, +for the sake of expediency, to leave a unevictable page on one of the regular +active/inactive LRU lists for vmscan to deal with. vmscan checks for such +pages in all of the shrink_{active|inactive|page}_list() functions and will +"cull" such pages that it encounters: that is, it diverts those pages to the +unevictable list for the zone being scanned. + +There may be situations where a page is mapped into a VM_LOCKED VMA, but the +page is not marked as PG_mlocked. Such pages will make it all the way to shrink_page_list() where they will be detected when vmscan walks the reverse -map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list() -will cull the page at that point. +map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, +shrink_page_list() will cull the page at that point. -To "cull" an unevictable page, vmscan simply puts the page back on the lru -list using putback_lru_page()--the inverse operation to isolate_lru_page()-- -after dropping the page lock. Because the condition which makes the page -unevictable may change once the page is unlocked, putback_lru_page() will -recheck the unevictable state of a page that it places on the unevictable lru -list. If the page has become unevictable, putback_lru_page() removes it from -the list and retries, including the page_unevictable() test. Because such a -race is a rare event and movement of pages onto the unevictable list should be -rare, these extra evictabilty checks should not occur in the majority of calls -to putback_lru_page(). +To "cull" an unevictable page, vmscan simply puts the page back on the LRU list +using putback_lru_page() - the inverse operation to isolate_lru_page() - after +dropping the page lock. Because the condition which makes the page unevictable +may change once the page is unlocked, putback_lru_page() will recheck the +unevictable state of a page that it places on the unevictable list. If the +page has become unevictable, putback_lru_page() removes it from the list and +retries, including the page_unevictable() test. Because such a race is a rare +event and movement of pages onto the unevictable list should be rare, these +extra evictabilty checks should not occur in the majority of calls to +putback_lru_page(). -Mlocked Page: Prior Work +============= +MLOCKED PAGES +============= -The "Unevictable Mlocked Pages" infrastructure is based on work originally +The unevictable page list is also useful for mlock(), in addition to ramfs and +SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in +NOMMU situations, all mappings are effectively mlocked. + + +HISTORY +------- + +The "Unevictable mlocked Pages" infrastructure is based on work originally posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU". -Nick posted his patch as an alternative to a patch posted by Christoph -Lameter to achieve the same objective--hiding mlocked pages from vmscan. -In Nick's patch, he used one of the struct page lru list link fields as a count -of VM_LOCKED vmas that map the page. This use of the link field for a count -prevented the management of the pages on an LRU list. Thus, mlocked pages were -not migratable as isolate_lru_page() could not find them and the lru list link -field was not available to the migration subsystem. Nick resolved this by -putting mlocked pages back on the lru list before attempting to isolate them, -thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated -with the Unevictable LRU work, the count was replaced by walking the reverse -map to determine whether any VM_LOCKED vmas mapped the page. More on this -below. - - -Mlocked Pages: Basic Management - -Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of -unevictable pages. When such a page has been "noticed" by the memory -management subsystem, the page is marked with the PG_mlocked [PageMlocked()] -flag. A PageMlocked() page will be placed on the unevictable LRU list when -it is added to the LRU. Pages can be "noticed" by memory management in -several places: - -1) in the mlock()/mlockall() system call handlers. -2) in the mmap() system call handler when mmap()ing a region with the - MAP_LOCKED flag, or mmap()ing a region in a task that has called - mlockall() with the MCL_FUTURE flag. Both of these conditions result - in the VM_LOCKED flag being set for the vma. -3) in the fault path, if mlocked pages are "culled" in the fault path, - and when a VM_LOCKED stack segment is expanded. -4) as mentioned above, in vmscan:shrink_page_list() when attempting to - reclaim a page in a VM_LOCKED vma via try_to_unmap(). - -Mlocked pages become unlocked and rescued from the unevictable list when: - -1) mapped in a range unlocked via the munlock()/munlockall() system calls. -2) munmapped() out of the last VM_LOCKED vma that maps the page, including - unmapping at task exit. -3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file. -4) before a page is COWed in a VM_LOCKED vma. - - -Mlocked Pages: mlock()/mlockall() System Call Handling +Nick posted his patch as an alternative to a patch posted by Christoph Lameter +to achieve the same objective: hiding mlocked pages from vmscan. + +In Nick's patch, he used one of the struct page LRU list link fields as a count +of VM_LOCKED VMAs that map the page. This use of the link field for a count +prevented the management of the pages on an LRU list, and thus mlocked pages +were not migratable as isolate_lru_page() could not find them, and the LRU list +link field was not available to the migration subsystem. + +Nick resolved this by putting mlocked pages back on the lru list before +attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When +Nick's patch was integrated with the Unevictable LRU work, the count was +replaced by walking the reverse map to determine whether any VM_LOCKED VMAs +mapped the page. More on this below. + + +BASIC MANAGEMENT +---------------- + +mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable +pages. When such a page has been "noticed" by the memory management subsystem, +the page is marked with the PG_mlocked flag. This can be manipulated using the +PageMlocked() functions. + +A PG_mlocked page will be placed on the unevictable list when it is added to +the LRU. Such pages can be "noticed" by memory management in several places: + + (1) in the mlock()/mlockall() system call handlers; + + (2) in the mmap() system call handler when mmapping a region with the + MAP_LOCKED flag; + + (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE + flag + + (4) in the fault path, if mlocked pages are "culled" in the fault path, + and when a VM_LOCKED stack segment is expanded; or + + (5) as mentioned above, in vmscan:shrink_page_list() when attempting to + reclaim a page in a VM_LOCKED VMA via try_to_unmap() + +all of which result in the VM_LOCKED flag being set for the VMA if it doesn't +already have it set. + +mlocked pages become unlocked and rescued from the unevictable list when: + + (1) mapped in a range unlocked via the munlock()/munlockall() system calls; + + (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including + unmapping at task exit; + + (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file; + or + + (4) before a page is COW'd in a VM_LOCKED VMA. + + +mlock()/mlockall() SYSTEM CALL HANDLING +--------------------------------------- Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup() -for each vma in the range specified by the call. In the case of mlockall(), +for each VMA in the range specified by the call. In the case of mlockall(), this is the entire active address space of the task. Note that mlock_fixup() -is used for both mlock()ing and munlock()ing a range of memory. A call to -mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED -is treated as a no-op--mlock_fixup() simply returns. - -If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas" -below, mlock_fixup() will attempt to merge the vma with its neighbors or split -off a subset of the vma if the range does not cover the entire vma. Once the -vma has been merged or split or neither, mlock_fixup() will call -__mlock_vma_pages_range() to fault in the pages via get_user_pages() and -to mark the pages as mlocked via mlock_vma_page(). - -Note that the vma being mlocked might be mapped with PROT_NONE. In this case, -get_user_pages() will be unable to fault in the pages. That's OK. If pages -do end up getting faulted into this VM_LOCKED vma, we'll handle them in the +is used for both mlocking and munlocking a range of memory. A call to mlock() +an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is +treated as a no-op, and mlock_fixup() simply returns. + +If the VMA passes some filtering as described in "Filtering Special Vmas" +below, mlock_fixup() will attempt to merge the VMA with its neighbors or split +off a subset of the VMA if the range does not cover the entire VMA. Once the +VMA has been merged or split or neither, mlock_fixup() will call +__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to +mark the pages as mlocked via mlock_vma_page(). + +Note that the VMA being mlocked might be mapped with PROT_NONE. In this case, +get_user_pages() will be unable to fault in the pages. That's okay. If pages +do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the fault path or in vmscan. Also note that a page returned by get_user_pages() could be truncated or -migrated out from under us, while we're trying to mlock it. To detect -this, __mlock_vma_pages_range() tests the page_mapping after acquiring -the page lock. If the page is still associated with its mapping, we'll -go ahead and call mlock_vma_page(). If the mapping is gone, we just -unlock the page and move on. Worse case, this results in page mapped -in a VM_LOCKED vma remaining on a normal LRU list without being -PageMlocked(). Again, vmscan will detect and cull such pages. - -mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will -TestSetPageMlocked() for each page returned by get_user_pages(). We use -TestSetPageMlocked() because the page might already be mlocked by another -task/vma and we don't want to do extra work. We especially do not want to -count an mlocked page more than once in the statistics. If the page was -already mlocked, mlock_vma_page() is done. +migrated out from under us, while we're trying to mlock it. To detect this, +__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock. +If the page is still associated with its mapping, we'll go ahead and call +mlock_vma_page(). If the mapping is gone, we just unlock the page and move on. +In the worst case, this will result in a page mapped in a VM_LOCKED VMA +remaining on a normal LRU list without being PageMlocked(). Again, vmscan will +detect and cull such pages. + +mlock_vma_page() will call TestSetPageMlocked() for each page returned by +get_user_pages(). We use TestSetPageMlocked() because the page might already +be mlocked by another task/VMA and we don't want to do extra work. We +especially do not want to count an mlocked page more than once in the +statistics. If the page was already mlocked, mlock_vma_page() need do nothing +more. If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the page from the LRU, as it is likely on the appropriate active or inactive list -at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will -putback the page--putback_lru_page()--which will notice that the page is now -mlocked and divert the page to the zone's unevictable LRU list. If +at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put +back the page - by calling putback_lru_page() - which will notice that the page +is now mlocked and divert the page to the zone's unevictable list. If mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle -it later if/when it attempts to reclaim the page. +it later if and when it attempts to reclaim the page. -Mlocked Pages: Filtering Special Vmas +FILTERING SPECIAL VMAS +---------------------- -mlock_fixup() filters several classes of "special" vmas: +mlock_fixup() filters several classes of "special" VMAs: -1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind +1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind these mappings are inherently pinned, so we don't need to mark them as - mlocked. In any case, most of the pages have no struct page in which to - so mark the page. Because of this, get_user_pages() will fail for these - vmas, so there is no sense in attempting to visit them. - -2) vmas mapping hugetlbfs page are already effectively pinned into memory. - We don't need nor want to mlock() these pages. However, to preserve the - prior behavior of mlock()--before the unevictable/mlock changes-- - mlock_fixup() will call make_pages_present() in the hugetlbfs vma range - to allocate the huge pages and populate the ptes. - -3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of - kernel pages, such as the vdso page, relay channel pages, etc. These pages + mlocked. In any case, most of the pages have no struct page in which to so + mark the page. Because of this, get_user_pages() will fail for these VMAs, + so there is no sense in attempting to visit them. + +2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We + neither need nor want to mlock() these pages. However, to preserve the + prior behavior of mlock() - before the unevictable/mlock changes - + mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to + allocate the huge pages and populate the ptes. + +3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of + kernel pages, such as the VDSO page, relay channel pages, etc. These pages are inherently unevictable and are not managed on the LRU lists. - mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls + mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls make_pages_present() to populate the ptes. -Note that for all of these special vmas, mlock_fixup() does not set the +Note that for all of these special VMAs, mlock_fixup() does not set the VM_LOCKED flag. Therefore, we won't have to deal with them later during -munlock() or munmap()--for example, at task exit. Neither does mlock_fixup() -account these vmas against the task's "locked_vm". - -Mlocked Pages: Downgrading the Mmap Semaphore. - -mlock_fixup() must be called with the mmap semaphore held for write, because -it may have to merge or split vmas. However, mlocking a large region of -memory can take a long time--especially if vmscan must reclaim pages to -satisfy the regions requirements. Faulting in a large region with the mmap -semaphore held for write can hold off other faults on the address space, in -the case of a multi-threaded task. It can also hold off scans of the task's -address space via /proc. While testing under heavy load, it was observed that -the ps(1) command could be held off for many minutes while a large segment was -mlock()ed down. - -To address this issue, and to make the system more responsive during mlock()ing -of large segments, mlock_fixup() downgrades the mmap semaphore to read mode -during the call to __mlock_vma_pages_range(). This works fine. However, the -callers of mlock_fixup() expect the semaphore to be returned in write mode. -So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not -support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore -and reacquire it in write mode. In a multi-threaded task, it is possible for -the task memory map to change while the semaphore is dropped. Therefore, -mlock_fixup() looks up the vma at the range start address after reacquiring -the semaphore in write mode and verifies that it still covers the original -range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of -mlock_fixup() have been changed to deal with this new error condition. - -Note: when munlocking a region, all of the pages should already be resident-- -unless we have racing threads mlocking() and munlocking() regions. So, -unlocking should not have to wait for page allocations nor faults of any kind. -Therefore mlock_fixup() does not downgrade the semaphore for munlock(). - - -Mlocked Pages: munlock()/munlockall() System Call Handling - -The munlock() and munlockall() system calls are handled by the same functions-- -do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock -vs lock operation indicated by an argument. So, these system calls are also -handled by mlock_fixup(). Again, if called for an already munlock()ed vma, -mlock_fixup() simply returns. Because of the vma filtering discussed above, -VM_LOCKED will not be set in any "special" vmas. So, these vmas will be +munlock(), munmap() or task exit. Neither does mlock_fixup() account these +VMAs against the task's "locked_vm". + + +munlock()/munlockall() SYSTEM CALL HANDLING +------------------------------------------- + +The munlock() and munlockall() system calls are handled by the same functions - +do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs +lock operation indicated by an argument. So, these system calls are also +handled by mlock_fixup(). Again, if called for an already munlocked VMA, +mlock_fixup() simply returns. Because of the VMA filtering discussed above, +VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be ignored for munlock. -If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off -the specified range. The range is then munlocked via the function -__mlock_vma_pages_range()--the same function used to mlock a vma range-- +If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the +specified range. The range is then munlocked via the function +__mlock_vma_pages_range() - the same function used to mlock a VMA range - passing a flag to indicate that munlock() is being performed. -Because the vma access protections could have been changed to PROT_NONE after +Because the VMA access protections could have been changed to PROT_NONE after faulting in and mlocking pages, get_user_pages() was unreliable for visiting -these pages for munlocking. Because we don't want to leave pages mlocked(), +these pages for munlocking. Because we don't want to leave pages mlocked, get_user_pages() was enhanced to accept a flag to ignore the permissions when -fetching the pages--all of which should be resident as a result of previous -mlock()ing. +fetching the pages - all of which should be resident as a result of previous +mlocking. For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked -flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page() -use the Test*PageMlocked() function to handle the case where the page might -have already been unlocked by another task. If the page was mlocked, -munlock_vma_page() updates that zone statistics for the number of mlocked -pages. Note, however, that at this point we haven't checked whether the page -is mapped by other VM_LOCKED vmas. - -We can't call try_to_munlock(), the function that walks the reverse map to check -for other VM_LOCKED vmas, without first isolating the page from the LRU. +flag using TestClearPageMlocked(). As with mlock_vma_page(), +munlock_vma_page() use the Test*PageMlocked() function to handle the case where +the page might have already been unlocked by another task. If the page was +mlocked, munlock_vma_page() updates that zone statistics for the number of +mlocked pages. Note, however, that at this point we haven't checked whether +the page is mapped by other VM_LOCKED VMAs. + +We can't call try_to_munlock(), the function that walks the reverse map to +check for other VM_LOCKED VMAs, without first isolating the page from the LRU. try_to_munlock() is a variant of try_to_unmap() and thus requires that the page -not be on an lru list. [More on these below.] However, the call to -isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). -So, we go ahead and clear PG_mlocked up front, as this might be the only chance -we have. If we can successfully isolate the page, we go ahead and +not be on an LRU list [more on these below]. However, the call to +isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So, +we go ahead and clear PG_mlocked up front, as this might be the only chance we +have. If we can successfully isolate the page, we go ahead and try_to_munlock(), which will restore the PG_mlocked flag and update the zone -page statistics if it finds another vma holding the page mlocked. If we fail +page statistics if it finds another VMA holding the page mlocked. If we fail to isolate the page, we'll have left a potentially mlocked page on the LRU. -This is fine, because we'll catch it later when/if vmscan tries to reclaim the -page. This should be relatively rare. - -Mlocked Pages: Migrating Them... - -A page that is being migrated has been isolated from the lru lists and is -held locked across unmapping of the page, updating the page's mapping -[address_space] entry and copying the contents and state, until the -page table entry has been replaced with an entry that refers to the new -page. Linux supports migration of mlocked pages and other unevictable -pages. This involves simply moving the PageMlocked and PageUnevictable states -from the old page to the new page. - -Note that page migration can race with mlocking or munlocking of the same -page. This has been discussed from the mlock/munlock perspective in the -respective sections above. Both processes [migration, m[un]locking], hold -the page locked. This provides the first level of synchronization. Page -migration zeros out the page_mapping of the old page before unlocking it, -so m[un]lock can skip these pages by testing the page mapping under page -lock. - -When completing page migration, we place the new and old pages back onto the -lru after dropping the page lock. The "unneeded" page--old page on success, -new page on failure--will be freed when the reference count held by the -migration process is released. To ensure that we don't strand pages on the -unevictable list because of a race between munlock and migration, page -migration uses the putback_lru_page() function to add migrated pages back to -the lru. - - -Mlocked Pages: mmap(MAP_LOCKED) System Call Handling +This is fine, because we'll catch it later if and if vmscan tries to reclaim +the page. This should be relatively rare. + + +MIGRATING MLOCKED PAGES +----------------------- + +A page that is being migrated has been isolated from the LRU lists and is held +locked across unmapping of the page, updating the page's address space entry +and copying the contents and state, until the page table entry has been +replaced with an entry that refers to the new page. Linux supports migration +of mlocked pages and other unevictable pages. This involves simply moving the +PG_mlocked and PG_unevictable states from the old page to the new page. + +Note that page migration can race with mlocking or munlocking of the same page. +This has been discussed from the mlock/munlock perspective in the respective +sections above. Both processes (migration and m[un]locking) hold the page +locked. This provides the first level of synchronization. Page migration +zeros out the page_mapping of the old page before unlocking it, so m[un]lock +can skip these pages by testing the page mapping under page lock. + +To complete page migration, we place the new and old pages back onto the LRU +after dropping the page lock. The "unneeded" page - old page on success, new +page on failure - will be freed when the reference count held by the migration +process is released. To ensure that we don't strand pages on the unevictable +list because of a race between munlock and migration, page migration uses the +putback_lru_page() function to add migrated pages back to the LRU. + + +mmap(MAP_LOCKED) SYSTEM CALL HANDLING +------------------------------------- In addition the the mlock()/mlockall() system calls, an application can request -that a region of memory be mlocked using the MAP_LOCKED flag with the mmap() +that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap() call. Furthermore, any mmap() call or brk() call that expands the heap by a task that has previously called mlockall() with the MCL_FUTURE flag will result -in the newly mapped memory being mlocked. Before the unevictable/mlock changes, -the kernel simply called make_pages_present() to allocate pages and populate -the page table. +in the newly mapped memory being mlocked. Before the unevictable/mlock +changes, the kernel simply called make_pages_present() to allocate pages and +populate the page table. To mlock a range of memory under the unevictable/mlock infrastructure, the mmap() handler and task address space expansion functions call mlock_vma_pages_range() specifying the vma and the address range to mlock. -mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in -"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will -have already been set by the caller, in filtered vmas. Thus these vma's need -not be visited for munlock when the region is unmapped. +mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in +"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have +already been set by the caller, in filtered VMAs. Thus these VMA's need not be +visited for munlock when the region is unmapped. -For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to +For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to fault/allocate the pages and mlock them. Again, like mlock_fixup(), mlock_vma_pages_range() downgrades the mmap semaphore to read mode before -attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore +attempting to fault/allocate and mlock the pages and "upgrades" the semaphore back to write mode before returning. -The callers of mlock_vma_pages_range() will have already added the memory -range to be mlocked to the task's "locked_vm". To account for filtered vmas, +The callers of mlock_vma_pages_range() will have already added the memory range +to be mlocked to the task's "locked_vm". To account for filtered VMAs, mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the -callers then subtract a non-negative return value from the task's locked_vm. -A negative return value represent an error--for example, from get_user_pages() -attempting to fault in a vma with PROT_NONE access. In this case, we leave -the memory range accounted as locked_vm, as the protections could be changed -later and pages allocated into that region. +callers then subtract a non-negative return value from the task's locked_vm. A +negative return value represent an error - for example, from get_user_pages() +attempting to fault in a VMA with PROT_NONE access. In this case, we leave the +memory range accounted as locked_vm, as the protections could be changed later +and pages allocated into that region. -Mlocked Pages: munmap()/exit()/exec() System Call Handling +munmap()/exit()/exec() SYSTEM CALL HANDLING +------------------------------------------- When unmapping an mlocked region of memory, whether by an explicit call to munmap() or via an internal unmap from exit() or exec() processing, we must -munlock the pages if we're removing the last VM_LOCKED vma that maps the pages. +munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages. Before the unevictable/mlock changes, mlocking did not mark the pages in any way, so unmapping them required no processing. To munlock a range of memory under the unevictable/mlock infrastructure, the -munmap() hander and task address space tear down function call +munmap() handler and task address space call tear down function munlock_vma_pages_all(). The name reflects the observation that one always -specifies the entire vma range when munlock()ing during unmap of a region. -Because of the vma filtering when mlocking() regions, only "normal" vmas that +specifies the entire VMA range when munlock()ing during unmap of a region. +Because of the VMA filtering when mlocking() regions, only "normal" VMAs that actually contain mlocked pages will be passed to munlock_vma_pages_all(). -munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup() +munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup() for the munlock case, calls __munlock_vma_pages_range() to walk the page table -for the vma's memory range and munlock_vma_page() each resident page mapped by -the vma. This effectively munlocks the page, only if this is the last -VM_LOCKED vma that maps the page. - +for the VMA's memory range and munlock_vma_page() each resident page mapped by +the VMA. This effectively munlocks the page, only if this is the last +VM_LOCKED VMA that maps the page. -Mlocked Page: try_to_unmap() -[Note: the code changes represented by this section are really quite small -compared to the text to describe what happening and why, and to discuss the -implications.] +try_to_unmap() +-------------- -Pages can, of course, be mapped into multiple vmas. Some of these vmas may +Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may have VM_LOCKED flag set. It is possible for a page mapped into one or more -VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one -of the active or inactive LRU lists. This could happen if, for example, a -task in the process of munlock()ing the page could not isolate the page from -the LRU. As a result, vmscan/shrink_page_list() might encounter such a page -as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To -handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED -vmas while it is walking a page's reverse map. +VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one +of the active or inactive LRU lists. This could happen if, for example, a task +in the process of munlocking the page could not isolate the page from the LRU. +As a result, vmscan/shrink_page_list() might encounter such a page as described +in section "vmscan's handling of unevictable pages". To handle this situation, +try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse +map. try_to_unmap() is always called, by either vmscan for reclaim or for page -migration, with the argument page locked and isolated from the LRU. BUG_ON() -assertions enforce this requirement. Separate functions handle anonymous and -mapped file pages, as these types of pages have different reverse map -mechanisms. - - try_to_unmap_anon() - -To unmap anonymous pages, each vma in the list anchored in the anon_vma must be -visited--at least until a VM_LOCKED vma is encountered. If the page is being -unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked -pages are migratable. However, for reclaim, if the page is mapped into a -VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap -semphore of the mm_struct to which the vma belongs in read mode. If this is -successful, try_to_unmap() will mlock the page via mlock_vma_page()--we -wouldn't have gotten to try_to_unmap() if the page were already mlocked--and -will return SWAP_MLOCK, indicating that the page is unevictable. If the -mmap semaphore cannot be acquired, we are not sure whether the page is really -unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN. - - try_to_unmap_file() -- linear mappings - -Unmapping of a mapped file page works the same, except that the scan visits -all vmas that maps the page's index/page offset in the page's mapping's -reverse map priority search tree. It must also visit each vma in the page's -mapping's non-linear list, if the list is non-empty. As for anonymous pages, -on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will -attempt to acquire the associated mm_struct's mmap semaphore to mlock the page, -returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not. - - try_to_unmap_file() -- non-linear mappings - -If a page's mapping contains a non-empty non-linear mapping vma list, then -try_to_un{map|lock}() must also visit each vma in that list to determine -whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit -all vmas in the non-linear list to ensure that the pages is not/should not be -mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate. -However, there is no easy way to determine whether the page is actually mapped -in a given vma--either for unmapping or testing whether the VM_LOCKED vma -actually pins the page. - -So, try_to_unmap_file() handles non-linear mappings by scanning a certain -number of pages--a "cluster"--in each non-linear vma associated with the page's -mapping, for each file mapped page that vmscan tries to unmap. If this happens -to unmap the page we're trying to unmap, try_to_unmap() will notice this on -return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it -will return SWAP_AGAIN, causing vmscan to recirculate this page. We take -advantage of the cluster scan in try_to_unmap_cluster() as follows: - -For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap -semaphore of the associated mm_struct for read without blocking. If this -attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will -retain the mmap semaphore for the scan; otherwise it drops it here. Then, -for each page in the cluster, if we're holding the mmap semaphore for a locked -vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This -call is a no-op if the page is already locked, but will mlock any pages in -the non-linear mapping that happen to be unlocked. If one of the pages so -mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will -return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan -to cull the page, rather than recirculating it on the inactive list. Again, -if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns -SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but -couldn't be mlocked. - - -Mlocked pages: try_to_munlock() Reverse Map Scan - -TODO/FIXME: a better name might be page_mlocked()--analogous to the -page_referenced() reverse map walker. - -When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall() -System Call Handling" above--tries to munlock a page, it needs to -determine whether or not the page is mapped by any VM_LOCKED vma, without -actually attempting to unmap all ptes from the page. For this purpose, the -unevictable/mlock infrastructure introduced a variant of try_to_unmap() called -try_to_munlock(). +migration, with the argument page locked and isolated from the LRU. Separate +functions handle anonymous and mapped file pages, as these types of pages have +different reverse map mechanisms. + + (*) try_to_unmap_anon() + + To unmap anonymous pages, each VMA in the list anchored in the anon_vma + must be visited - at least until a VM_LOCKED VMA is encountered. If the + page is being unmapped for migration, VM_LOCKED VMAs do not stop the + process because mlocked pages are migratable. However, for reclaim, if + the page is mapped into a VM_LOCKED VMA, the scan stops. + + try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of + the mm_struct to which the VMA belongs. If this is successful, it will + mlock the page via mlock_vma_page() - we wouldn't have gotten to + try_to_unmap_anon() if the page were already mlocked - and will return + SWAP_MLOCK, indicating that the page is unevictable. + + If the mmap semaphore cannot be acquired, we are not sure whether the page + is really unevictable or not. In this case, try_to_unmap_anon() will + return SWAP_AGAIN. + + (*) try_to_unmap_file() - linear mappings + + Unmapping of a mapped file page works the same as for anonymous mappings, + except that the scan visits all VMAs that map the page's index/page offset + in the page's mapping's reverse map priority search tree. It also visits + each VMA in the page's mapping's non-linear list, if the list is + non-empty. + + As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file + page, try_to_unmap_file() will attempt to acquire the associated + mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this + is successful, and SWAP_AGAIN, if not. + + (*) try_to_unmap_file() - non-linear mappings + + If a page's mapping contains a non-empty non-linear mapping VMA list, then + try_to_un{map|lock}() must also visit each VMA in that list to determine + whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit + all VMAs in the non-linear list to ensure that the pages is not/should not + be mlocked. + + If a VM_LOCKED VMA is found in the list, the scan could terminate. + However, there is no easy way to determine whether the page is actually + mapped in a given VMA - either for unmapping or testing whether the + VM_LOCKED VMA actually pins the page. + + try_to_unmap_file() handles non-linear mappings by scanning a certain + number of pages - a "cluster" - in each non-linear VMA associated with the + page's mapping, for each file mapped page that vmscan tries to unmap. If + this happens to unmap the page we're trying to unmap, try_to_unmap() will + notice this on return (page_mapcount(page) will be 0) and return + SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to + recirculate this page. We take advantage of the cluster scan in + try_to_unmap_cluster() as follows: + + For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the + mmap semaphore of the associated mm_struct for read without blocking. + + If this attempt is successful and the VMA is VM_LOCKED, + try_to_unmap_cluster() will retain the mmap semaphore for the scan; + otherwise it drops it here. + + Then, for each page in the cluster, if we're holding the mmap semaphore + for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to + mlock the page. This call is a no-op if the page is already locked, + but will mlock any pages in the non-linear mapping that happen to be + unlocked. + + If one of the pages so mlocked is the page passed in to try_to_unmap(), + try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default + SWAP_AGAIN. This will allow vmscan to cull the page, rather than + recirculating it on the inactive list. + + Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it + returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED + VMA, but couldn't be mlocked. + + +try_to_munlock() REVERSE MAP SCAN +--------------------------------- + + [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the + page_referenced() reverse map walker. + +When munlock_vma_page() [see section "munlock()/munlockall() System Call +Handling" above] tries to munlock a page, it needs to determine whether or not +the page is mapped by any VM_LOCKED VMA without actually attempting to unmap +all PTEs from the page. For this purpose, the unevictable/mlock infrastructure +introduced a variant of try_to_unmap() called try_to_munlock(). try_to_munlock() calls the same functions as try_to_unmap() for anonymous and mapped file pages with an additional argument specifing unlock versus unmap processing. Again, these functions walk the respective reverse maps looking -for VM_LOCKED vmas. When such a vma is found for anonymous pages and file +for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions attempt to acquire the associated mmap semphore, mlock the page via mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page. -If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap -semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() -to recycle the page on the inactive list and hope that it has better luck -with the page next time. - -For file pages mapped into non-linear vmas, the try_to_munlock() logic works -slightly differently. On encountering a VM_LOCKED non-linear vma that might -map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking -the page. munlock_vma_page() will just leave the page unlocked and let -vmscan deal with it--the usual fallback position. - -Note that try_to_munlock()'s reverse map walk must visit every vma in a pages' -reverse map to determine that a page is NOT mapped into any VM_LOCKED vma. -However, the scan can terminate when it encounters a VM_LOCKED vma and can -successfully acquire the vma's mmap semphore for read and mlock the page. -Although try_to_munlock() can be called many [very many!] times when -munlock()ing a large region or tearing down a large address space that has been -mlocked via mlockall(), overall this is a fairly rare event. - -Mlocked Page: Page Reclaim in shrink_*_list() - -shrink_active_list() culls any obviously unevictable pages--i.e., -!page_evictable(page, NULL)--diverting these to the unevictable lru -list. However, shrink_active_list() only sees unevictable pages that -made it onto the active/inactive lru lists. Note that these pages do not -have PageUnevictable set--otherwise, they would be on the unevictable list and -shrink_active_list would never see them. +If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap +semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to +recycle the page on the inactive list and hope that it has better luck with the +page next time. + +For file pages mapped into non-linear VMAs, the try_to_munlock() logic works +slightly differently. On encountering a VM_LOCKED non-linear VMA that might +map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the +page. munlock_vma_page() will just leave the page unlocked and let vmscan deal +with it - the usual fallback position. + +Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's +reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA. +However, the scan can terminate when it encounters a VM_LOCKED VMA and can +successfully acquire the VMA's mmap semphore for read and mlock the page. +Although try_to_munlock() might be called a great many times when munlocking a +large region or tearing down a large address space that has been mlocked via +mlockall(), overall this is a fairly rare event. + + +PAGE RECLAIM IN shrink_*_list() +------------------------------- + +shrink_active_list() culls any obviously unevictable pages - i.e. +!page_evictable(page, NULL) - diverting these to the unevictable list. +However, shrink_active_list() only sees unevictable pages that made it onto the +active/inactive lru lists. Note that these pages do not have PageUnevictable +set - otherwise they would be on the unevictable list and shrink_active_list +would never see them. Some examples of these unevictable pages on the LRU lists are: -1) ramfs pages that have been placed on the lru lists when first allocated. + (1) ramfs pages that have been placed on the LRU lists when first allocated. + + (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to + allocate or fault in the pages in the shared memory region. This happens + when an application accesses the page the first time after SHM_LOCK'ing + the segment. -2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to - allocate or fault in the pages in the shared memory region. This happens - when an application accesses the page the first time after SHM_LOCKing - the segment. + (3) mlocked pages that could not be isolated from the LRU and moved to the + unevictable list in mlock_vma_page(). -3) Mlocked pages that could not be isolated from the lru and moved to the - unevictable list in mlock_vma_page(). + (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't + acquire the VMA's mmap semaphore to test the flags and set PageMlocked. + munlock_vma_page() was forced to let the page back on to the normal LRU + list for vmscan to handle. -3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't - acquire the vma's mmap semaphore to test the flags and set PageMlocked. - munlock_vma_page() was forced to let the page back on to the normal - LRU list for vmscan to handle. +shrink_inactive_list() also diverts any unevictable pages that it finds on the +inactive lists to the appropriate zone's unevictable list. -shrink_inactive_list() also culls any unevictable pages that it finds on -the inactive lists, again diverting them to the appropriate zone's unevictable -lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became -SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or -pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from -the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice -the latter, but will pass on to shrink_page_list(). +shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd +after shrink_active_list() had moved them to the inactive list, or pages mapped +into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to +recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter, +but will pass on to shrink_page_list(). shrink_page_list() again culls obviously unevictable pages that it could encounter for similar reason to shrink_inactive_list(). Pages mapped into -VM_LOCKED vmas but without PG_mlocked set will make it all the way to +VM_LOCKED VMAs but without PG_mlocked set will make it all the way to try_to_unmap(). shrink_page_list() will divert them to the unevictable list when try_to_unmap() returns SWAP_MLOCK, as discussed above. -- cgit v1.1