From b85a3ef4ac65169b65fd2fe9bec7912bbf475ba4 Mon Sep 17 00:00:00 2001 From: John Linn Date: Mon, 20 Jun 2011 11:47:27 -0600 Subject: ARM: Xilinx: Adding Xilinx board support The 1st board support is minimal to get a system up and running on the Xilinx platform. This platform reuses the clock implementation from plat-versatile, and it depends entirely on CONFIG_OF support. There is only one board support file which obtains all device information from a device tree dtb file which is passed to the kernel at boot time. Signed-off-by: John Linn --- arch/arm/boot/dts/zynq-ep107.dts | 52 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-ep107.dts (limited to 'arch/arm/boot/dts/zynq-ep107.dts') diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts new file mode 100644 index 0000000..37ca192 --- /dev/null +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +/ { + model = "Xilinx Zynq EP107"; + compatible = "xlnx,zynq-ep107"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; + linux,stdout-path = &uart0; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + intc: interrupt-controller@f8f01000 { + interrupt-controller; + compatible = "arm,gic"; + reg = <0xF8F01000 0x1000>; + #interrupt-cells = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <59 0>; + clock = <50000000>; + }; + }; +}; -- cgit v1.1