From 2b8f0119b857d32f827641a9f7b31fe8d31bfde6 Mon Sep 17 00:00:00 2001
From: Richard Cochran <richardcochran@gmail.com>
Date: Wed, 28 Sep 2011 15:16:41 +0200
Subject: ixp4xx: support omicron ixp425 based boards

This patch adds board support for the DEVIXP, the MICCPT, and the
MIC256, which are three IXP425 based boards produced by OMICRON
electronics, GmbH.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-ixp4xx/miccpt-pci.c | 78 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 arch/arm/mach-ixp4xx/miccpt-pci.c

(limited to 'arch/arm/mach-ixp4xx/miccpt-pci.c')

diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV		4
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		1
+#define INTB		2
+#define INTC		3
+#define INTD		4
+
+
+void __init miccpt_pci_preinit(void)
+{
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
+	};
+
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
+
+	return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= miccpt_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+	if (machine_is_miccpt())
+		pci_common_init(&miccpt_pci);
+	return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
-- 
cgit v1.1