From 7b88e62f5d219a86d81bdf4388012c97dc42e8f8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 5 Oct 2011 15:14:02 -0700 Subject: ARM: OMAP1: Use generic map_io, init_early and init_irq This allows removing omap hacks for map_io allowing generic map_io. Note that in the future we can't do cpu_is_omapxxxx detection until in init_early. This means that board-innovator.c now assumes 15xx only, and board-generic.c assumes 16xx only. This is best fixed later on by passing the SoC type from device tree. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 16 ++------ arch/arm/mach-omap1/board-fsample.c | 76 +++++++++++++++++------------------ arch/arm/mach-omap1/board-generic.c | 16 ++------ arch/arm/mach-omap1/board-h2.c | 16 ++------ arch/arm/mach-omap1/board-h3.c | 16 ++------ arch/arm/mach-omap1/board-htcherald.c | 12 ++---- arch/arm/mach-omap1/board-innovator.c | 36 ++++++++--------- arch/arm/mach-omap1/board-nokia770.c | 34 ++++++---------- arch/arm/mach-omap1/board-osk.c | 16 ++------ arch/arm/mach-omap1/board-palmte.c | 16 ++------ arch/arm/mach-omap1/board-palmtt.c | 16 ++------ arch/arm/mach-omap1/board-palmz71.c | 18 ++------- arch/arm/mach-omap1/board-perseus2.c | 75 +++++++++++++++++----------------- arch/arm/mach-omap1/board-sx1.c | 17 ++------ arch/arm/mach-omap1/board-voiceblue.c | 16 ++------ arch/arm/mach-omap1/io.c | 56 ++++++++++++-------------- 16 files changed, 158 insertions(+), 294 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 312ea6b..4427737 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -135,12 +135,6 @@ void ams_delta_latch2_write(u16 mask, u16 value) *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; } -static void __init ams_delta_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { @@ -379,17 +373,13 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); -static void __init ams_delta_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell */ .boot_params = 0x10000100, - .map_io = ams_delta_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = ams_delta_init_irq, + .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a6b1bea..b09dfe6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -297,6 +297,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = { static void __init omap_fsample_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + fsample_init_smc91x(); if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -326,12 +359,6 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_fsample_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_fsample_io_desc[] __initdata = { { @@ -350,49 +377,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = { static void __init omap_fsample_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); iotable_init(omap_fsample_io_desc, ARRAY_SIZE(omap_fsample_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland */ .boot_params = 0x10000100, .map_io = omap_fsample_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_fsample_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 04fc356..cc0cca7 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -28,12 +28,6 @@ #include #include -static void __init omap_generic_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* assume no Mini-AB port */ #ifdef CONFIG_ARCH_OMAP15XX @@ -87,17 +81,13 @@ static void __init omap_generic_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_generic_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren */ .boot_params = 0x10000100, - .map_io = omap_generic_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_generic_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cb7fb1a..248a5b8 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -373,12 +373,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { }, }; -static void __init h2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, @@ -454,17 +448,13 @@ static void __init h2_init(void) h2_mmc_init(); } -static void __init h2_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak */ .boot_params = 0x10000100, - .map_io = h2_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h2_init_irq, + .init_irq = omap1_init_irq, .init_machine = h2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 31f3487..f28f05f 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -436,23 +436,13 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init h3_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .boot_params = 0x10000100, - .map_io = h3_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h3_init_irq, + .init_irq = omap1_init_irq, .init_machine = h3_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 36e06ea..67798df 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -500,7 +500,7 @@ static void __init htcherald_lcd_init(void) static void __init htcherald_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); /* * The LCD panel must be disabled and DMA turned off here, as doing @@ -601,20 +601,14 @@ static void __init htcherald_init(void) #endif } -static void __init htcherald_init_irq(void) -{ - printk(KERN_INFO "htcherald_init_irq.\n"); - omap1_init_common_hw(); - omap1_init_irq(); -} - MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone */ /* Maintainer: wing-linux.sourceforge.net */ .boot_params = 0x10000100, .map_io = htcherald_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = htcherald_init_irq, + .init_irq = omap1_init_irq, .init_machine = htcherald_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 0b1ba46..3e349d0 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -289,12 +289,6 @@ static void __init innovator_init_smc91x(void) } } -static void __init innovator_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ @@ -439,30 +433,32 @@ static void __init innovator_init(void) innovator_mmc_init(); } +/* + * REVISIT: Assume 15xx for now, we don't want to do revision check + * until later on. The right way to fix this is to set up a different + * machine_id for 16xx Innovator, or use device tree. + */ static void __init innovator_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - printk("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); - } -#endif + iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); + udelay(10); /* Delay needed for FPGA */ + + /* Dump the Innovator FPGA rev early - useful info for support. */ + pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", + fpga_read(OMAP1510_FPGA_REV_HIGH), + fpga_read(OMAP1510_FPGA_REV_LOW), + fpga_read(OMAP1510_FPGA_BOARD_REV)); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ .boot_params = 0x10000100, .map_io = innovator_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = innovator_init_irq, + .init_irq = omap1_init_irq, .init_machine = innovator_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5469ce2..9b348b6 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -39,21 +39,6 @@ #define ADS7846_PENDOWN_GPIO 15 -static void __init omap_nokia770_init_irq(void) -{ - /* On Nokia 770, the SleepX signal is masked with an - * MPUIO line by default. It has to be unmasked for it - * to become functional */ - - /* SleepX mask direction */ - omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); - /* Unmask SleepX signal */ - omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); - - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int nokia770_keymap[] = { KEY(1, 0, GROUP_0 | KEY_UP), KEY(2, 0, GROUP_1 | KEY_F5), @@ -246,6 +231,15 @@ static inline void nokia770_mmc_init(void) static void __init omap_nokia770_init(void) { + /* On Nokia 770, the SleepX signal is masked with an + * MPUIO line by default. It has to be unmasked for it + * to become functional */ + + /* SleepX mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask SleepX signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); @@ -258,16 +252,12 @@ static void __init omap_nokia770_init(void) nokia770_mmc_init(); } -static void __init omap_nokia770_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(NOKIA770, "Nokia 770") .boot_params = 0x10000100, - .map_io = omap_nokia770_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_nokia770_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index b08a213..562986e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -279,12 +279,6 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } -static void __init osk_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -576,17 +570,13 @@ static void __init osk_init(void) osk_mistral_init(); } -static void __init osk_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme */ .boot_params = 0x10000100, - .map_io = osk_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = osk_init_irq, + .init_irq = omap1_init_irq, .init_machine = osk_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 459cb6b..fc9edd8 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -59,12 +59,6 @@ #define PALMTE_MMC2_GPIO OMAP_MPUIO(7) #define PALMTE_MMC3_GPIO OMAP_MPUIO(11) -static void __init omap_palmte_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmte_keymap[] = { KEY(0, 0, KEY_F1), /* Calendar */ KEY(1, 0, KEY_F2), /* Contacts */ @@ -269,16 +263,12 @@ static void __init omap_palmte_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmte_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .boot_params = 0x10000100, - .map_io = omap_palmte_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmte_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index b214f45..5ff3def 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { } }; -static void __init omap_palmtt_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config palmtt_usb_config __initdata = { .register_dev = 1, .hmc_mode = 0, @@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmtt_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .boot_params = 0x10000100, - .map_io = omap_palmtt_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmtt_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 9b0ea48..8e08873 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -57,13 +57,6 @@ #define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) #define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) -static void __init -omap_palmz71_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmz71_keymap[] = { KEY(0, 0, KEY_F1), KEY(1, 0, KEY_F2), @@ -334,17 +327,12 @@ omap_palmz71_init(void) palmz71_gpio_setup(0); } -static void __init -omap_palmz71_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .boot_params = 0x10000100, - .map_io = omap_palmz71_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmz71_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 67acd41..6ed649b 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -265,6 +265,39 @@ static void __init perseus2_init_smc91x(void) static void __init omap_perseus2_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + perseus2_init_smc91x(); if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -294,11 +327,6 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_perseus2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -311,49 +339,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman */ .boot_params = 0x10000100, .map_io = omap_perseus2_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_perseus2_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 9c3b7c5..23326e0 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -407,24 +407,13 @@ static void __init omap_sx1_init(void) gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ } -/*----------------------------------------*/ -static void __init omap_sx1_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} -/*----------------------------------------*/ - -static void __init omap_sx1_map_io(void) -{ - omap1_map_common_io(); -} MACHINE_START(SX1, "OMAP310 based Siemens SX1") .boot_params = 0x10000100, - .map_io = omap_sx1_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_sx1_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 036edc0e..1444ce8 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { static struct omap_board_config_kernel voiceblue_config[] = { }; -static void __init voiceblue_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init voiceblue_map_io(void) -{ - omap1_map_common_io(); -} - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -302,9 +291,10 @@ static void __init voiceblue_init(void) MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl */ .boot_params = 0x10000100, - .map_io = voiceblue_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = voiceblue_init_irq, + .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 870886a..a16aab7 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -85,50 +85,44 @@ static struct map_desc omap16xx_io_desc[] __initdata = { #endif /* - * Maps common IO regions for omap1. This should only get called from - * board specific init. + * Maps common IO regions for omap1 */ -void __init omap1_map_common_io(void) +static void __init omap1_map_common_io(void) { iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_omapxxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - omap_check_revision(); +} #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); - } +void __init omap7xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); +} #endif + #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); - } +void __init omap15xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); +} #endif - omap_sram_init(); +#if defined(CONFIG_ARCH_OMAP16XX) +void __init omap16xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } +#endif /* - * Common low-level hardware init for omap1. This should only get called from - * board specific init. + * Common low-level hardware init for omap1. */ -void __init omap1_init_common_hw(void) +void omap1_init_early(void) { + omap_check_revision(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -138,8 +132,8 @@ void __init omap1_init_common_hw(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); - omap1_mux_init(); + omap_sram_init(); } /* -- cgit v1.1 From a66cb3454f220f49f900646ebdc76cb943319eb7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Oct 2011 13:52:57 -0700 Subject: ARM: OMAP: Map SRAM later on with ioremap_exec() This allows us to remove omap hacks for map_io. Acked-by: Nicolas Pitre Reviewed-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/devices.c | 3 +++ arch/arm/mach-omap1/io.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36f26c3..38e1142 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -291,6 +292,8 @@ static int __init omap1_init_devices(void) if (!cpu_class_is_omap1()) return -ENODEV; + omap_sram_init(); + /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index a16aab7..8140a4e 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -21,7 +21,6 @@ #include "clock.h" extern void omap_check_revision(void); -extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -133,7 +132,6 @@ void omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_sram_init(); } /* -- cgit v1.1 From 8aca3ab5865f8cfbde841b6daf9442cc2279ced3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 5 Oct 2011 17:22:39 -0700 Subject: ARM: OMAP: Warn if omap_ioremap is called before SoC detection We don't have cpu_is_omapxxxx SoC detection initialized until SoC detection is initialized from init_early. Note that with the common map_io we should no longer need cpu_is_omapxxxx for ioremap. Acked-by: Nicolas Pitre Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/io.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 8140a4e..fd9eb09 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -121,6 +121,7 @@ void __init omap16xx_map_io(void) void omap1_init_early(void) { omap_check_revision(); + omap_ioremap_init(); /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". -- cgit v1.1