From 1a721859f8e57ddf3f6df2b5094057f9f536b4d0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Feb 2011 14:41:19 +0100 Subject: mach-u300: use mmci driver for GPIO card detect The mmci driver can handle a GPIO pin for card detect, using IRQs and all just fine, so switch to using that. Delete the old bogus input device hack, if userspace need to detect MMC cards it should use udev like everyone else. Signed-off-by: Linus Walleij --- arch/arm/mach-u300/mmc.c | 148 +++++------------------------------------------ 1 file changed, 13 insertions(+), 135 deletions(-) (limited to 'arch/arm/mach-u300') diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index de1ac9a..8bb4ef4 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -13,11 +13,6 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include @@ -25,137 +20,27 @@ #include "mmc.h" #include "padmux.h" -struct mmci_card_event { - struct input_dev *mmc_input; - int mmc_inserted; - struct work_struct workq; - struct mmci_platform_data mmc0_plat_data; +static struct mmci_platform_data mmc0_plat_data = { + /* + * Do not set ocr_mask or voltage translation function, + * we have a regulator we can control instead. + */ + /* Nominally 2.85V on our platform */ + .f_max = 24000000, + .gpio_wp = -1, + .gpio_cd = U300_GPIO_PIN_MMC_CD, + .cd_invert = true, + .capabilities = MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; -static unsigned int mmc_status(struct device *dev) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - return mmci_card->mmc_inserted; -} - -static int mmci_callback(void *data) -{ - struct mmci_card_event *mmci_card = data; - - disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD); - schedule_work(&mmci_card->workq); - - return 0; -} - - -static ssize_t gpio_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct mmci_card_event *mmci_card = container_of( - dev->platform_data, - struct mmci_card_event, mmc0_plat_data); - - - return sprintf(buf, "%d\n", !mmci_card->mmc_inserted); -} - -static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL); - -static void _mmci_callback(struct work_struct *ws) -{ - - struct mmci_card_event *mmci_card = container_of( - ws, - struct mmci_card_event, workq); - - mdelay(20); - - mmci_card->mmc_inserted = !gpio_get_value(U300_GPIO_PIN_MMC_CD); - - input_report_switch(mmci_card->mmc_input, KEY_INSERT, - mmci_card->mmc_inserted); - input_sync(mmci_card->mmc_input); - - pr_debug("MMC/SD card was %s\n", - mmci_card->mmc_inserted ? "inserted" : "removed"); - - enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, mmci_card->mmc_inserted); -} - int __devinit mmc_init(struct amba_device *adev) { - struct mmci_card_event *mmci_card; struct device *mmcsd_device = &adev->dev; struct pmx *pmx; int ret = 0; - mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL); - if (!mmci_card) - return -ENOMEM; - - /* - * Do not set ocr_mask or voltage translation function, - * we have a regulator we can control instead. - */ - /* Nominally 2.85V on our platform */ - mmci_card->mmc0_plat_data.f_max = 24000000; - mmci_card->mmc0_plat_data.status = mmc_status; - mmci_card->mmc0_plat_data.gpio_wp = -1; - mmci_card->mmc0_plat_data.gpio_cd = -1; - mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - - mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; - - INIT_WORK(&mmci_card->workq, _mmci_callback); - - ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection"); - if (ret) { - printk(KERN_CRIT "Could not allocate MMC card detection " \ - "GPIO pin\n"); - goto out; - } - - ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD); - if (ret) { - printk(KERN_CRIT "Invalid GPIO pin requested\n"); - goto out; - } - - ret = sysfs_create_file(&mmcsd_device->kobj, - &dev_attr_mmc_inserted.attr); - if (ret) - goto out; - - mmci_card->mmc_input = input_allocate_device(); - if (!mmci_card->mmc_input) { - printk(KERN_CRIT "Could not allocate MMC input device\n"); - return -ENOMEM; - } - - mmci_card->mmc_input->name = "MMC insert notification"; - mmci_card->mmc_input->id.bustype = BUS_HOST; - mmci_card->mmc_input->id.vendor = 0; - mmci_card->mmc_input->id.product = 0; - mmci_card->mmc_input->id.version = 0x0100; - mmci_card->mmc_input->dev.parent = mmcsd_device; - input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT); - - /* - * Since this must always be compiled into the kernel, this input - * is never unregistered or free:ed. - */ - ret = input_register_device(mmci_card->mmc_input); - if (ret) { - input_free_device(mmci_card->mmc_input); - goto out; - } - - input_set_drvdata(mmci_card->mmc_input, mmci_card); + mmcsd_device->platform_data = &mmc0_plat_data; /* * Setup padmuxing for MMC. Since this must always be @@ -171,12 +56,5 @@ int __devinit mmc_init(struct amba_device *adev) pr_warning("Could not activate padmuxing\n"); } - ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback, - mmci_card); - - schedule_work(&mmci_card->workq); - - printk(KERN_INFO "Registered MMC insert/remove notification\n"); -out: return ret; } -- cgit v1.1