From ca7ed0f22f4876986b2eb1fbd80ba78e07fd69d5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 8 Dec 2006 02:38:39 -0800 Subject: [PATCH] Char: stallion, kill typedefs Typedefs are considered ugly in the kernel. Eliminate them. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/stallion.c | 458 ++++++++++++++++++++++++------------------------ 1 file changed, 227 insertions(+), 231 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 6a6e512..b108ac6 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -88,16 +88,14 @@ * PCI BIOS32 support is compiled into the kernel. */ -typedef struct { +static struct stlconf { int brdtype; int ioaddr1; int ioaddr2; unsigned long memaddr; int irq; int irqtype; -} stlconf_t; - -static stlconf_t stl_brdconf[] = { +} stl_brdconf[] = { /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/ }; @@ -154,8 +152,8 @@ static struct termios stl_deftermios = { */ static comstats_t stl_comstats; static combrd_t stl_brdstats; -static stlbrd_t stl_dummybrd; -static stlport_t stl_dummyport; +static struct stlbrd stl_dummybrd; +static struct stlport stl_dummyport; /* * Define global place to put buffer overflow characters. @@ -164,7 +162,7 @@ static char stl_unwanted[SC26198_RXFIFOSIZE]; /*****************************************************************************/ -static stlbrd_t *stl_brds[STL_MAXBRDS]; +static struct stlbrd *stl_brds[STL_MAXBRDS]; /* * Per board state flags. Used with the state field of the board struct. @@ -243,12 +241,10 @@ static char **stl_brdsp[] = { * parse any module arguments. */ -typedef struct stlbrdtype { +static struct { char *name; int type; -} stlbrdtype_t; - -static stlbrdtype_t stl_brdstr[] = { +} stl_brdstr[] = { { "easyio", BRD_EASYIO }, { "eio", BRD_EASYIO }, { "20", BRD_EASYIO }, @@ -458,7 +454,7 @@ static unsigned int stl_baudrates[] = { */ static void stl_argbrds(void); -static int stl_parsebrd(stlconf_t *confp, char **argp); +static int stl_parsebrd(struct stlconf *confp, char **argp); static unsigned long stl_atol(char *str); @@ -482,31 +478,31 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout); static void stl_sendxchar(struct tty_struct *tty, char ch); static void stl_hangup(struct tty_struct *tty); static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); -static int stl_portinfo(stlport_t *portp, int portnr, char *pos); +static int stl_portinfo(struct stlport *portp, int portnr, char *pos); static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data); -static int stl_brdinit(stlbrd_t *brdp); -static int stl_initports(stlbrd_t *brdp, stlpanel_t *panelp); -static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp); -static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp); +static int stl_brdinit(struct stlbrd *brdp); +static int stl_initports(struct stlbrd *brdp, struct stlpanel *panelp); +static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp); +static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp); static int stl_getbrdstats(combrd_t __user *bp); -static int stl_getportstats(stlport_t *portp, comstats_t __user *cp); -static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp); -static int stl_getportstruct(stlport_t __user *arg); -static int stl_getbrdstruct(stlbrd_t __user *arg); -static int stl_waitcarrier(stlport_t *portp, struct file *filp); -static int stl_eiointr(stlbrd_t *brdp); -static int stl_echatintr(stlbrd_t *brdp); -static int stl_echmcaintr(stlbrd_t *brdp); -static int stl_echpciintr(stlbrd_t *brdp); -static int stl_echpci64intr(stlbrd_t *brdp); +static int stl_getportstats(struct stlport *portp, comstats_t __user *cp); +static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); +static int stl_getportstruct(struct stlport __user *arg); +static int stl_getbrdstruct(struct stlbrd __user *arg); +static int stl_waitcarrier(struct stlport *portp, struct file *filp); +static int stl_eiointr(struct stlbrd *brdp); +static int stl_echatintr(struct stlbrd *brdp); +static int stl_echmcaintr(struct stlbrd *brdp); +static int stl_echpciintr(struct stlbrd *brdp); +static int stl_echpci64intr(struct stlbrd *brdp); static void stl_offintr(struct work_struct *); -static stlbrd_t *stl_allocbrd(void); -static stlport_t *stl_getport(int brdnr, int panelnr, int portnr); +static struct stlbrd *stl_allocbrd(void); +static struct stlport *stl_getport(int brdnr, int panelnr, int portnr); static inline int stl_initbrds(void); -static inline int stl_initeio(stlbrd_t *brdp); -static inline int stl_initech(stlbrd_t *brdp); +static inline int stl_initeio(struct stlbrd *brdp); +static inline int stl_initech(struct stlbrd *brdp); static inline int stl_getbrdnr(void); #ifdef CONFIG_PCI @@ -517,59 +513,59 @@ static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp); /* * CD1400 uart specific handling functions. */ -static void stl_cd1400setreg(stlport_t *portp, int regnr, int value); -static int stl_cd1400getreg(stlport_t *portp, int regnr); -static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value); -static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp); -static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); -static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp); -static int stl_cd1400getsignals(stlport_t *portp); -static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts); -static void stl_cd1400ccrwait(stlport_t *portp); -static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx); -static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx); -static void stl_cd1400disableintrs(stlport_t *portp); -static void stl_cd1400sendbreak(stlport_t *portp, int len); -static void stl_cd1400flowctrl(stlport_t *portp, int state); -static void stl_cd1400sendflow(stlport_t *portp, int state); -static void stl_cd1400flush(stlport_t *portp); -static int stl_cd1400datastate(stlport_t *portp); -static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase); -static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase); -static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr); -static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr); -static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr); - -static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr); +static void stl_cd1400setreg(struct stlport *portp, int regnr, int value); +static int stl_cd1400getreg(struct stlport *portp, int regnr); +static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value); +static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp); +static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); +static void stl_cd1400setport(struct stlport *portp, struct termios *tiosp); +static int stl_cd1400getsignals(struct stlport *portp); +static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts); +static void stl_cd1400ccrwait(struct stlport *portp); +static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx); +static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx); +static void stl_cd1400disableintrs(struct stlport *portp); +static void stl_cd1400sendbreak(struct stlport *portp, int len); +static void stl_cd1400flowctrl(struct stlport *portp, int state); +static void stl_cd1400sendflow(struct stlport *portp, int state); +static void stl_cd1400flush(struct stlport *portp); +static int stl_cd1400datastate(struct stlport *portp); +static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase); +static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase); +static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr); +static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr); +static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr); + +static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr); /* * SC26198 uart specific handling functions. */ -static void stl_sc26198setreg(stlport_t *portp, int regnr, int value); -static int stl_sc26198getreg(stlport_t *portp, int regnr); -static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value); -static int stl_sc26198getglobreg(stlport_t *portp, int regnr); -static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp); -static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); -static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp); -static int stl_sc26198getsignals(stlport_t *portp); -static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts); -static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx); -static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx); -static void stl_sc26198disableintrs(stlport_t *portp); -static void stl_sc26198sendbreak(stlport_t *portp, int len); -static void stl_sc26198flowctrl(stlport_t *portp, int state); -static void stl_sc26198sendflow(stlport_t *portp, int state); -static void stl_sc26198flush(stlport_t *portp); -static int stl_sc26198datastate(stlport_t *portp); -static void stl_sc26198wait(stlport_t *portp); -static void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty); -static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase); -static void stl_sc26198txisr(stlport_t *port); -static void stl_sc26198rxisr(stlport_t *port, unsigned int iack); -static void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch); -static void stl_sc26198rxbadchars(stlport_t *portp); -static void stl_sc26198otherisr(stlport_t *port, unsigned int iack); +static void stl_sc26198setreg(struct stlport *portp, int regnr, int value); +static int stl_sc26198getreg(struct stlport *portp, int regnr); +static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value); +static int stl_sc26198getglobreg(struct stlport *portp, int regnr); +static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp); +static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); +static void stl_sc26198setport(struct stlport *portp, struct termios *tiosp); +static int stl_sc26198getsignals(struct stlport *portp); +static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts); +static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx); +static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx); +static void stl_sc26198disableintrs(struct stlport *portp); +static void stl_sc26198sendbreak(struct stlport *portp, int len); +static void stl_sc26198flowctrl(struct stlport *portp, int state); +static void stl_sc26198sendflow(struct stlport *portp, int state); +static void stl_sc26198flush(struct stlport *portp); +static int stl_sc26198datastate(struct stlport *portp); +static void stl_sc26198wait(struct stlport *portp); +static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty); +static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase); +static void stl_sc26198txisr(struct stlport *port); +static void stl_sc26198rxisr(struct stlport *port, unsigned int iack); +static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch); +static void stl_sc26198rxbadchars(struct stlport *portp); +static void stl_sc26198otherisr(struct stlport *port, unsigned int iack); /*****************************************************************************/ @@ -577,20 +573,20 @@ static void stl_sc26198otherisr(stlport_t *port, unsigned int iack); * Generic UART support structure. */ typedef struct uart { - int (*panelinit)(stlbrd_t *brdp, stlpanel_t *panelp); - void (*portinit)(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); - void (*setport)(stlport_t *portp, struct termios *tiosp); - int (*getsignals)(stlport_t *portp); - void (*setsignals)(stlport_t *portp, int dtr, int rts); - void (*enablerxtx)(stlport_t *portp, int rx, int tx); - void (*startrxtx)(stlport_t *portp, int rx, int tx); - void (*disableintrs)(stlport_t *portp); - void (*sendbreak)(stlport_t *portp, int len); - void (*flowctrl)(stlport_t *portp, int state); - void (*sendflow)(stlport_t *portp, int state); - void (*flush)(stlport_t *portp); - int (*datastate)(stlport_t *portp); - void (*intr)(stlpanel_t *panelp, unsigned int iobase); + int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp); + void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp); + void (*setport)(struct stlport *portp, struct termios *tiosp); + int (*getsignals)(struct stlport *portp); + void (*setsignals)(struct stlport *portp, int dtr, int rts); + void (*enablerxtx)(struct stlport *portp, int rx, int tx); + void (*startrxtx)(struct stlport *portp, int rx, int tx); + void (*disableintrs)(struct stlport *portp); + void (*sendbreak)(struct stlport *portp, int len); + void (*flowctrl)(struct stlport *portp, int state); + void (*sendflow)(struct stlport *portp, int state); + void (*flush)(struct stlport *portp); + int (*datastate)(struct stlport *portp); + void (*intr)(struct stlpanel *panelp, unsigned int iobase); } uart_t; /* @@ -730,9 +726,9 @@ static int __init stallion_module_init(void) static void __exit stallion_module_exit(void) { - stlbrd_t *brdp; - stlpanel_t *panelp; - stlport_t *portp; + struct stlbrd *brdp; + struct stlpanel *panelp; + struct stlport *portp; int i, j, k; pr_debug("cleanup_module()\n"); @@ -802,8 +798,8 @@ module_exit(stallion_module_exit); static void stl_argbrds(void) { - stlconf_t conf; - stlbrd_t *brdp; + struct stlconf conf; + struct stlbrd *brdp; int i; pr_debug("stl_argbrds()\n"); @@ -867,7 +863,7 @@ static unsigned long stl_atol(char *str) * Parse the supplied argument string, into the board conf struct. */ -static int stl_parsebrd(stlconf_t *confp, char **argp) +static int stl_parsebrd(struct stlconf *confp, char **argp) { char *sp; int i; @@ -911,14 +907,14 @@ static int stl_parsebrd(stlconf_t *confp, char **argp) * Allocate a new board structure. Fill out the basic info in it. */ -static stlbrd_t *stl_allocbrd(void) +static struct stlbrd *stl_allocbrd(void) { - stlbrd_t *brdp; + struct stlbrd *brdp; - brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL); + brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL); if (!brdp) { printk("STALLION: failed to allocate memory (size=%Zd)\n", - sizeof(stlbrd_t)); + sizeof(struct stlbrd)); return NULL; } @@ -930,8 +926,8 @@ static stlbrd_t *stl_allocbrd(void) static int stl_open(struct tty_struct *tty, struct file *filp) { - stlport_t *portp; - stlbrd_t *brdp; + struct stlport *portp; + struct stlbrd *brdp; unsigned int minordev; int brdnr, panelnr, portnr, rc; @@ -1020,7 +1016,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) * maybe because if we are clocal then we don't need to wait... */ -static int stl_waitcarrier(stlport_t *portp, struct file *filp) +static int stl_waitcarrier(struct stlport *portp, struct file *filp) { unsigned long flags; int rc, doclocal; @@ -1074,7 +1070,7 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp) static void stl_close(struct tty_struct *tty, struct file *filp) { - stlport_t *portp; + struct stlport *portp; unsigned long flags; pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); @@ -1154,7 +1150,7 @@ static void stl_close(struct tty_struct *tty, struct file *filp) static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count) { - stlport_t *portp; + struct stlport *portp; unsigned int len, stlen; unsigned char *chbuf; char *head, *tail; @@ -1211,7 +1207,7 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count static void stl_putchar(struct tty_struct *tty, unsigned char ch) { - stlport_t *portp; + struct stlport *portp; unsigned int len; char *head, *tail; @@ -1249,7 +1245,7 @@ static void stl_putchar(struct tty_struct *tty, unsigned char ch) static void stl_flushchars(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_flushchars(tty=%p)\n", tty); @@ -1268,7 +1264,7 @@ static void stl_flushchars(struct tty_struct *tty) static int stl_writeroom(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; char *head, *tail; pr_debug("stl_writeroom(tty=%p)\n", tty); @@ -1299,7 +1295,7 @@ static int stl_writeroom(struct tty_struct *tty) static int stl_charsinbuffer(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; unsigned int size; char *head, *tail; @@ -1327,10 +1323,10 @@ static int stl_charsinbuffer(struct tty_struct *tty) * Generate the serial struct info. */ -static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp) +static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) { struct serial_struct sio; - stlbrd_t *brdp; + struct stlbrd *brdp; pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp); @@ -1366,7 +1362,7 @@ static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp) * just quietly ignore any requests to change irq, etc. */ -static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp) +static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp) { struct serial_struct sio; @@ -1396,7 +1392,7 @@ static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp) static int stl_tiocmget(struct tty_struct *tty, struct file *file) { - stlport_t *portp; + struct stlport *portp; if (tty == NULL) return -ENODEV; @@ -1412,7 +1408,7 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file) static int stl_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - stlport_t *portp; + struct stlport *portp; int rts = -1, dtr = -1; if (tty == NULL) @@ -1438,7 +1434,7 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file, static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - stlport_t *portp; + struct stlport *portp; unsigned int ival; int rc; void __user *argp = (void __user *)arg; @@ -1503,7 +1499,7 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd static void stl_settermios(struct tty_struct *tty, struct termios *old) { - stlport_t *portp; + struct stlport *portp; struct termios *tiosp; pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old); @@ -1539,7 +1535,7 @@ static void stl_settermios(struct tty_struct *tty, struct termios *old) static void stl_throttle(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_throttle(tty=%p)\n", tty); @@ -1559,7 +1555,7 @@ static void stl_throttle(struct tty_struct *tty) static void stl_unthrottle(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_unthrottle(tty=%p)\n", tty); @@ -1580,7 +1576,7 @@ static void stl_unthrottle(struct tty_struct *tty) static void stl_stop(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_stop(tty=%p)\n", tty); @@ -1600,7 +1596,7 @@ static void stl_stop(struct tty_struct *tty) static void stl_start(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_start(tty=%p)\n", tty); @@ -1622,7 +1618,7 @@ static void stl_start(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_hangup(tty=%p)\n", tty); @@ -1656,7 +1652,7 @@ static void stl_hangup(struct tty_struct *tty) static void stl_flushbuffer(struct tty_struct *tty) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_flushbuffer(tty=%p)\n", tty); @@ -1674,7 +1670,7 @@ static void stl_flushbuffer(struct tty_struct *tty) static void stl_breakctl(struct tty_struct *tty, int state) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state); @@ -1691,7 +1687,7 @@ static void stl_breakctl(struct tty_struct *tty, int state) static void stl_waituntilsent(struct tty_struct *tty, int timeout) { - stlport_t *portp; + struct stlport *portp; unsigned long tend; pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout); @@ -1719,7 +1715,7 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) static void stl_sendxchar(struct tty_struct *tty, char ch) { - stlport_t *portp; + struct stlport *portp; pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch); @@ -1747,7 +1743,7 @@ static void stl_sendxchar(struct tty_struct *tty, char ch) * short then padded with spaces). */ -static int stl_portinfo(stlport_t *portp, int portnr, char *pos) +static int stl_portinfo(struct stlport *portp, int portnr, char *pos) { char *sp; int sigs, cnt; @@ -1793,9 +1789,9 @@ static int stl_portinfo(stlport_t *portp, int portnr, char *pos) static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) { - stlbrd_t *brdp; - stlpanel_t *panelp; - stlport_t *portp; + struct stlbrd *brdp; + struct stlpanel *panelp; + struct stlport *portp; int brdnr, panelnr, portnr, totalport; int curoff, maxoff; char *pos; @@ -1876,7 +1872,7 @@ stl_readdone: static irqreturn_t stl_intr(int irq, void *dev_id) { - stlbrd_t *brdp = dev_id; + struct stlbrd *brdp = dev_id; pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, irq); @@ -1889,9 +1885,9 @@ static irqreturn_t stl_intr(int irq, void *dev_id) * Interrupt service routine for EasyIO board types. */ -static int stl_eiointr(stlbrd_t *brdp) +static int stl_eiointr(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int iobase; int handled = 0; @@ -1912,9 +1908,9 @@ static int stl_eiointr(stlbrd_t *brdp) * Interrupt service routine for ECH-AT board types. */ -static int stl_echatintr(stlbrd_t *brdp) +static int stl_echatintr(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int ioaddr; int bnknr; int handled = 0; @@ -1943,9 +1939,9 @@ static int stl_echatintr(stlbrd_t *brdp) * Interrupt service routine for ECH-MCA board types. */ -static int stl_echmcaintr(stlbrd_t *brdp) +static int stl_echmcaintr(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int ioaddr; int bnknr; int handled = 0; @@ -1969,9 +1965,9 @@ static int stl_echmcaintr(stlbrd_t *brdp) * Interrupt service routine for ECH-PCI board types. */ -static int stl_echpciintr(stlbrd_t *brdp) +static int stl_echpciintr(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int ioaddr; int bnknr, recheck; int handled = 0; @@ -2000,9 +1996,9 @@ static int stl_echpciintr(stlbrd_t *brdp) * Interrupt service routine for ECH-8/64-PCI board types. */ -static int stl_echpci64intr(stlbrd_t *brdp) +static int stl_echpci64intr(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int ioaddr; int bnknr; int handled = 0; @@ -2028,7 +2024,7 @@ static int stl_echpci64intr(stlbrd_t *brdp) */ static void stl_offintr(struct work_struct *work) { - stlport_t *portp = container_of(work, stlport_t, tqueue); + struct stlport *portp = container_of(work, struct stlport, tqueue); struct tty_struct *tty; unsigned int oldsigs; @@ -2065,9 +2061,9 @@ static void stl_offintr(struct work_struct *work) * Initialize all the ports on a panel. */ -static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp) +static int __init stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) { - stlport_t *portp; + struct stlport *portp; int chipmask, i; pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp); @@ -2079,10 +2075,10 @@ static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp) * each ports data structures. */ for (i = 0; (i < panelp->nrports); i++) { - portp = kzalloc(sizeof(stlport_t), GFP_KERNEL); + portp = kzalloc(sizeof(struct stlport), GFP_KERNEL); if (!portp) { printk("STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(stlport_t)); + "(size=%Zd)\n", sizeof(struct stlport)); break; } @@ -2114,9 +2110,9 @@ static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp) * Try to find and initialize an EasyIO board. */ -static inline int stl_initeio(stlbrd_t *brdp) +static inline int stl_initeio(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int status; char *name; int rc; @@ -2213,10 +2209,10 @@ static inline int stl_initeio(stlbrd_t *brdp) * can complete the setup. */ - panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); + panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); if (!panelp) { printk(KERN_WARNING "STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(stlpanel_t)); + "(size=%Zd)\n", sizeof(struct stlpanel)); return -ENOMEM; } @@ -2255,9 +2251,9 @@ static inline int stl_initeio(stlbrd_t *brdp) * dealing with all types of ECH board. */ -static inline int stl_initech(stlbrd_t *brdp) +static inline int stl_initech(struct stlbrd *brdp) { - stlpanel_t *panelp; + struct stlpanel *panelp; unsigned int status, nxtid, ioaddr, conflict; int panelnr, banknr, i; char *name; @@ -2385,10 +2381,10 @@ static inline int stl_initech(stlbrd_t *brdp) status = inb(ioaddr + ECH_PNLSTATUS); if ((status & ECH_PNLIDMASK) != nxtid) break; - panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); + panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL); if (!panelp) { printk("STALLION: failed to allocate memory " - "(size=%Zd)\n", sizeof(stlpanel_t)); + "(size=%Zd)\n", sizeof(struct stlpanel)); break; } panelp->magic = STL_PANELMAGIC; @@ -2466,7 +2462,7 @@ static inline int stl_initech(stlbrd_t *brdp) * since the initial search and setup is very different. */ -static int __init stl_brdinit(stlbrd_t *brdp) +static int __init stl_brdinit(struct stlbrd *brdp) { int i; @@ -2540,7 +2536,7 @@ static inline int stl_getbrdnr(void) static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp) { - stlbrd_t *brdp; + struct stlbrd *brdp; pr_debug("stl_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", brdtype, devp->bus->number, devp->devfn); @@ -2638,8 +2634,8 @@ static inline int stl_findpcibrds(void) static inline int stl_initbrds(void) { - stlbrd_t *brdp; - stlconf_t *confp; + struct stlbrd *brdp; + struct stlconf *confp; int i; pr_debug("stl_initbrds()\n"); @@ -2688,8 +2684,8 @@ static inline int stl_initbrds(void) static int stl_getbrdstats(combrd_t __user *bp) { - stlbrd_t *brdp; - stlpanel_t *panelp; + struct stlbrd *brdp; + struct stlpanel *panelp; int i; if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t))) @@ -2726,10 +2722,10 @@ static int stl_getbrdstats(combrd_t __user *bp) * Resolve the referenced port number into a port struct pointer. */ -static stlport_t *stl_getport(int brdnr, int panelnr, int portnr) +static struct stlport *stl_getport(int brdnr, int panelnr, int portnr) { - stlbrd_t *brdp; - stlpanel_t *panelp; + struct stlbrd *brdp; + struct stlpanel *panelp; if ((brdnr < 0) || (brdnr >= STL_MAXBRDS)) return(NULL); @@ -2754,7 +2750,7 @@ static stlport_t *stl_getport(int brdnr, int panelnr, int portnr) * what port to get stats for (used through board control device). */ -static int stl_getportstats(stlport_t *portp, comstats_t __user *cp) +static int stl_getportstats(struct stlport *portp, comstats_t __user *cp) { unsigned char *head, *tail; unsigned long flags; @@ -2812,7 +2808,7 @@ static int stl_getportstats(stlport_t *portp, comstats_t __user *cp) * Clear the port stats structure. We also return it zeroed out... */ -static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp) +static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp) { if (!portp) { if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) @@ -2837,17 +2833,17 @@ static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp) * Return the entire driver ports structure to a user app. */ -static int stl_getportstruct(stlport_t __user *arg) +static int stl_getportstruct(struct stlport __user *arg) { - stlport_t *portp; + struct stlport *portp; - if (copy_from_user(&stl_dummyport, arg, sizeof(stlport_t))) + if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport))) return -EFAULT; portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr, stl_dummyport.portnr); if (!portp) return -ENODEV; - return copy_to_user(arg, portp, sizeof(stlport_t)) ? -EFAULT : 0; + return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0; } /*****************************************************************************/ @@ -2856,18 +2852,18 @@ static int stl_getportstruct(stlport_t __user *arg) * Return the entire driver board structure to a user app. */ -static int stl_getbrdstruct(stlbrd_t __user *arg) +static int stl_getbrdstruct(struct stlbrd __user *arg) { - stlbrd_t *brdp; + struct stlbrd *brdp; - if (copy_from_user(&stl_dummybrd, arg, sizeof(stlbrd_t))) + if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd))) return -EFAULT; if ((stl_dummybrd.brdnr < 0) || (stl_dummybrd.brdnr >= STL_MAXBRDS)) return -ENODEV; brdp = stl_brds[stl_dummybrd.brdnr]; if (!brdp) return(-ENODEV); - return copy_to_user(arg, brdp, sizeof(stlbrd_t)) ? -EFAULT : 0; + return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0; } /*****************************************************************************/ @@ -2997,19 +2993,19 @@ static int __init stl_init(void) * (Maybe should make this inline...) */ -static int stl_cd1400getreg(stlport_t *portp, int regnr) +static int stl_cd1400getreg(struct stlport *portp, int regnr) { outb((regnr + portp->uartaddr), portp->ioaddr); return inb(portp->ioaddr + EREG_DATA); } -static void stl_cd1400setreg(stlport_t *portp, int regnr, int value) +static void stl_cd1400setreg(struct stlport *portp, int regnr, int value) { outb((regnr + portp->uartaddr), portp->ioaddr); outb(value, portp->ioaddr + EREG_DATA); } -static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value) +static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value) { outb((regnr + portp->uartaddr), portp->ioaddr); if (inb(portp->ioaddr + EREG_DATA) != value) { @@ -3027,7 +3023,7 @@ static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value) * identical when dealing with ports. */ -static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) +static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp) { unsigned int gfrcr; int chipmask, i, j; @@ -3084,7 +3080,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) * Initialize hardware specific port registers. */ -static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp) +static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) { unsigned long flags; pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, @@ -3115,7 +3111,7 @@ static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *po * since it won't usually take too long to be ready. */ -static void stl_cd1400ccrwait(stlport_t *portp) +static void stl_cd1400ccrwait(struct stlport *portp) { int i; @@ -3136,9 +3132,9 @@ static void stl_cd1400ccrwait(stlport_t *portp) * settings. */ -static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp) +static void stl_cd1400setport(struct stlport *portp, struct termios *tiosp) { - stlbrd_t *brdp; + struct stlbrd *brdp; unsigned long flags; unsigned int clkdiv, baudrate; unsigned char cor1, cor2, cor3; @@ -3359,7 +3355,7 @@ static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp) * Set the state of the DTR and RTS signals. */ -static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts) +static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts) { unsigned char msvr1, msvr2; unsigned long flags; @@ -3391,7 +3387,7 @@ static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts) * Return the state of the signals. */ -static int stl_cd1400getsignals(stlport_t *portp) +static int stl_cd1400getsignals(struct stlport *portp) { unsigned char msvr1, msvr2; unsigned long flags; @@ -3427,7 +3423,7 @@ static int stl_cd1400getsignals(stlport_t *portp) * Enable/Disable the Transmitter and/or Receiver. */ -static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx) +static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx) { unsigned char ccr; unsigned long flags; @@ -3461,7 +3457,7 @@ static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx) * Start/stop the Transmitter and/or Receiver. */ -static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx) +static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx) { unsigned char sreron, sreroff; unsigned long flags; @@ -3498,7 +3494,7 @@ static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx) * Disable all interrupts from this port. */ -static void stl_cd1400disableintrs(stlport_t *portp) +static void stl_cd1400disableintrs(struct stlport *portp) { unsigned long flags; @@ -3514,7 +3510,7 @@ static void stl_cd1400disableintrs(stlport_t *portp) /*****************************************************************************/ -static void stl_cd1400sendbreak(stlport_t *portp, int len) +static void stl_cd1400sendbreak(struct stlport *portp, int len) { unsigned long flags; @@ -3539,7 +3535,7 @@ static void stl_cd1400sendbreak(stlport_t *portp, int len) * Take flow control actions... */ -static void stl_cd1400flowctrl(stlport_t *portp, int state) +static void stl_cd1400flowctrl(struct stlport *portp, int state) { struct tty_struct *tty; unsigned long flags; @@ -3601,7 +3597,7 @@ static void stl_cd1400flowctrl(stlport_t *portp, int state) * Send a flow control character... */ -static void stl_cd1400sendflow(stlport_t *portp, int state) +static void stl_cd1400sendflow(struct stlport *portp, int state) { struct tty_struct *tty; unsigned long flags; @@ -3634,7 +3630,7 @@ static void stl_cd1400sendflow(stlport_t *portp, int state) /*****************************************************************************/ -static void stl_cd1400flush(stlport_t *portp) +static void stl_cd1400flush(struct stlport *portp) { unsigned long flags; @@ -3663,7 +3659,7 @@ static void stl_cd1400flush(stlport_t *portp) * maintains the busy port flag. */ -static int stl_cd1400datastate(stlport_t *portp) +static int stl_cd1400datastate(struct stlport *portp) { pr_debug("stl_cd1400datastate(portp=%p)\n", portp); @@ -3679,7 +3675,7 @@ static int stl_cd1400datastate(stlport_t *portp) * Interrupt service routine for cd1400 EasyIO boards. */ -static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase) +static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase) { unsigned char svrtype; @@ -3709,7 +3705,7 @@ static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase) * Interrupt service routine for cd1400 panels. */ -static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase) +static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase) { unsigned char svrtype; @@ -3735,7 +3731,7 @@ static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase) * this is the only way to generate them on the cd1400. */ -static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr) +static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr) { if (portp->brklen == 1) { outb((COR2 + portp->uartaddr), ioaddr); @@ -3777,9 +3773,9 @@ static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr) * be NULL if the buffer has been freed. */ -static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr) +static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) { - stlport_t *portp; + struct stlport *portp; int len, stlen; char *head, *tail; unsigned char ioack, srer; @@ -3856,9 +3852,9 @@ stl_txalldone: * shutdown a port not in user context. Need to handle this case. */ -static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr) +static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) { - stlport_t *portp; + struct stlport *portp; struct tty_struct *tty; unsigned int ioack, len, buflen; unsigned char status; @@ -3954,9 +3950,9 @@ stl_rxalldone: * processing routine. */ -static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr) +static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr) { - stlport_t *portp; + struct stlport *portp; unsigned int ioack; unsigned char misr; @@ -3992,19 +3988,19 @@ static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr) * (Maybe should make this inline...) */ -static int stl_sc26198getreg(stlport_t *portp, int regnr) +static int stl_sc26198getreg(struct stlport *portp, int regnr) { outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); return inb(portp->ioaddr + XP_DATA); } -static void stl_sc26198setreg(stlport_t *portp, int regnr, int value) +static void stl_sc26198setreg(struct stlport *portp, int regnr, int value) { outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); outb(value, (portp->ioaddr + XP_DATA)); } -static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value) +static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value) { outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); if (inb(portp->ioaddr + XP_DATA) != value) { @@ -4020,14 +4016,14 @@ static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value) * Functions to get and set the sc26198 global registers. */ -static int stl_sc26198getglobreg(stlport_t *portp, int regnr) +static int stl_sc26198getglobreg(struct stlport *portp, int regnr) { outb(regnr, (portp->ioaddr + XP_ADDR)); return inb(portp->ioaddr + XP_DATA); } #if 0 -static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value) +static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value) { outb(regnr, (portp->ioaddr + XP_ADDR)); outb(value, (portp->ioaddr + XP_DATA)); @@ -4042,7 +4038,7 @@ static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value) * identical when dealing with ports. */ -static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp) +static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp) { int chipmask, i; int nrchips, ioaddr; @@ -4087,7 +4083,7 @@ static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp) * Initialize hardware specific port registers. */ -static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp) +static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp) { pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp, panelp, portp); @@ -4113,9 +4109,9 @@ static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *p * settings. */ -static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp) +static void stl_sc26198setport(struct stlport *portp, struct termios *tiosp) { - stlbrd_t *brdp; + struct stlbrd *brdp; unsigned long flags; unsigned int baudrate; unsigned char mr0, mr1, mr2, clk; @@ -4308,7 +4304,7 @@ static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp) * Set the state of the DTR and RTS signals. */ -static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts) +static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts) { unsigned char iopioron, iopioroff; unsigned long flags; @@ -4341,7 +4337,7 @@ static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts) * Return the state of the signals. */ -static int stl_sc26198getsignals(stlport_t *portp) +static int stl_sc26198getsignals(struct stlport *portp) { unsigned char ipr; unsigned long flags; @@ -4370,7 +4366,7 @@ static int stl_sc26198getsignals(stlport_t *portp) * Enable/Disable the Transmitter and/or Receiver. */ -static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx) +static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx) { unsigned char ccr; unsigned long flags; @@ -4401,7 +4397,7 @@ static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx) * Start/stop the Transmitter and/or Receiver. */ -static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx) +static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx) { unsigned char imr; unsigned long flags; @@ -4434,7 +4430,7 @@ static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx) * Disable all interrupts from this port. */ -static void stl_sc26198disableintrs(stlport_t *portp) +static void stl_sc26198disableintrs(struct stlport *portp) { unsigned long flags; @@ -4450,7 +4446,7 @@ static void stl_sc26198disableintrs(stlport_t *portp) /*****************************************************************************/ -static void stl_sc26198sendbreak(stlport_t *portp, int len) +static void stl_sc26198sendbreak(struct stlport *portp, int len) { unsigned long flags; @@ -4474,7 +4470,7 @@ static void stl_sc26198sendbreak(stlport_t *portp, int len) * Take flow control actions... */ -static void stl_sc26198flowctrl(stlport_t *portp, int state) +static void stl_sc26198flowctrl(struct stlport *portp, int state) { struct tty_struct *tty; unsigned long flags; @@ -4543,7 +4539,7 @@ static void stl_sc26198flowctrl(stlport_t *portp, int state) * Send a flow control character. */ -static void stl_sc26198sendflow(stlport_t *portp, int state) +static void stl_sc26198sendflow(struct stlport *portp, int state) { struct tty_struct *tty; unsigned long flags; @@ -4582,7 +4578,7 @@ static void stl_sc26198sendflow(stlport_t *portp, int state) /*****************************************************************************/ -static void stl_sc26198flush(stlport_t *portp) +static void stl_sc26198flush(struct stlport *portp) { unsigned long flags; @@ -4610,7 +4606,7 @@ static void stl_sc26198flush(stlport_t *portp) * check the port statusy register to be sure. */ -static int stl_sc26198datastate(stlport_t *portp) +static int stl_sc26198datastate(struct stlport *portp) { unsigned long flags; unsigned char sr; @@ -4638,7 +4634,7 @@ static int stl_sc26198datastate(stlport_t *portp) * to process a command... */ -static void stl_sc26198wait(stlport_t *portp) +static void stl_sc26198wait(struct stlport *portp) { int i; @@ -4659,7 +4655,7 @@ static void stl_sc26198wait(stlport_t *portp) * automatic flow control modes of the sc26198. */ -static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty) +static inline void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty) { unsigned char mr0; @@ -4677,9 +4673,9 @@ static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty) * Interrupt service routine for sc26198 panels. */ -static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase) +static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase) { - stlport_t *portp; + struct stlport *portp; unsigned int iack; spin_lock(&brd_lock); @@ -4715,7 +4711,7 @@ static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase) * be NULL if the buffer has been freed. */ -static void stl_sc26198txisr(stlport_t *portp) +static void stl_sc26198txisr(struct stlport *portp) { unsigned int ioaddr; unsigned char mr0; @@ -4776,7 +4772,7 @@ static void stl_sc26198txisr(stlport_t *portp) * shutdown a port not in user context. Need to handle this case. */ -static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack) +static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) { struct tty_struct *tty; unsigned int len, buflen, ioaddr; @@ -4830,7 +4826,7 @@ static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack) * Process an RX bad character. */ -static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch) +static inline void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch) { struct tty_struct *tty; unsigned int ioaddr; @@ -4888,7 +4884,7 @@ static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, ch * the FIFO). */ -static void stl_sc26198rxbadchars(stlport_t *portp) +static void stl_sc26198rxbadchars(struct stlport *portp) { unsigned char status, mr1; char ch; @@ -4921,7 +4917,7 @@ static void stl_sc26198rxbadchars(stlport_t *portp) * processing time. */ -static void stl_sc26198otherisr(stlport_t *portp, unsigned int iack) +static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack) { unsigned char cir, ipr, xisr; -- cgit v1.1