From e8b6a1271035e621d1c4b22403c697b5c969728c Mon Sep 17 00:00:00 2001 From: Samuel Gabrielsson Date: Wed, 30 Mar 2011 10:21:23 -0300 Subject: i7core_edac: Add scrubbing support Add scrubbing support to i7core_edac, tested on intel Xeon L5638. Signed-off-by: Samuel Gabrielsson Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i7core_edac.c | 126 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) (limited to 'drivers/edac') diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index c64ba26..0c02486 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -78,6 +78,8 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); /* OFFSETS for Device 0 Function 0 */ #define MC_CFG_CONTROL 0x90 + #define MC_CFG_UNLOCK 0x02 + #define MC_CFG_LOCK 0x00 /* OFFSETS for Device 3 Function 0 */ @@ -98,6 +100,14 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); #define DIMM0_COR_ERR(r) ((r) & 0x7fff) /* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */ +#define MC_SSRCONTROL 0x48 + #define SSR_MODE_DISABLE 0x00 + #define SSR_MODE_ENABLE 0x01 + #define SSR_MODE_MASK 0x03 + +#define MC_SCRUB_CONTROL 0x4c + #define STARTSCRUB (1 << 24) + #define MC_COR_ECC_CNT_0 0x80 #define MC_COR_ECC_CNT_1 0x84 #define MC_COR_ECC_CNT_2 0x88 @@ -1901,6 +1911,116 @@ static int i7core_mce_check_error(void *priv, struct mce *mce) return 1; } +/* + * set_sdram_scrub_rate This routine sets byte/sec bandwidth scrub rate + * to hardware according to SCRUBINTERVAL formula + * found in datasheet. + */ +static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + const u32 cache_line_size = 64; + const u32 freq_dclk = 800*1000000; + u32 dw_scrub; + u32 dw_ssr; + + /* Get data from the MC register, function 2 */ + pdev = pvt->pci_mcr[2]; + if (!pdev) + return -ENODEV; + + pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub); + + if (new_bw == 0) { + /* Prepare to disable petrol scrub */ + dw_scrub &= ~STARTSCRUB; + /* Stop the patrol scrub engine */ + write_and_test(pdev, MC_SCRUB_CONTROL, dw_scrub & ~0x00ffffff); + + /* Get current status of scrub rate and set bit to disable */ + pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr); + dw_ssr &= ~SSR_MODE_MASK; + dw_ssr |= SSR_MODE_DISABLE; + } else { + /* + * Translate the desired scrub rate to a register value and + * program the cooresponding register value. + */ + dw_scrub = 0x00ffffff & (cache_line_size * freq_dclk / new_bw); + + /* Start the patrol scrub engine */ + pci_write_config_dword(pdev, MC_SCRUB_CONTROL, + STARTSCRUB | dw_scrub); + + /* Get current status of scrub rate and set bit to enable */ + pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr); + dw_ssr &= ~SSR_MODE_MASK; + dw_ssr |= SSR_MODE_ENABLE; + } + /* Disable or enable scrubbing */ + pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr); + + return new_bw; +} + +/* + * get_sdram_scrub_rate This routine convert current scrub rate value + * into byte/sec bandwidth accourding to + * SCRUBINTERVAL formula found in datasheet. + */ +static int get_sdram_scrub_rate(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + const u32 cache_line_size = 64; + const u32 freq_dclk = 800*1000000; + u32 scrubval; + + /* Get data from the MC register, function 2 */ + pdev = pvt->pci_mcr[2]; + if (!pdev) + return -ENODEV; + + /* Get current scrub control data */ + pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval); + + /* Mask highest 8-bits to 0 */ + scrubval &= 0x00ffffff; + if (!scrubval) + return 0; + + /* Calculate scrub rate value into byte/sec bandwidth */ + return 0xffffffff & (cache_line_size * freq_dclk / (u64) scrubval); +} + +static void enable_sdram_scrub_setting(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 pci_lock; + + /* Unlock writes to pci registers */ + pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock); + pci_lock &= ~0x3; + pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, + pci_lock | MC_CFG_UNLOCK); + + mci->set_sdram_scrub_rate = set_sdram_scrub_rate; + mci->get_sdram_scrub_rate = get_sdram_scrub_rate; +} + +static void disable_sdram_scrub_setting(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 pci_lock; + + /* Lock writes to pci registers */ + pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock); + pci_lock &= ~0x3; + pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, + pci_lock | MC_CFG_LOCK); +} + static void i7core_pci_ctl_create(struct i7core_pvt *pvt) { pvt->i7core_pci = edac_pci_create_generic_ctl( @@ -1939,6 +2059,9 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev) debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n", __func__, mci, &i7core_dev->pdev[0]->dev); + /* Disable scrubrate setting */ + disable_sdram_scrub_setting(mci); + /* Disable MCE NMI handler */ edac_mce_unregister(&pvt->edac_mce); @@ -2012,6 +2135,9 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev) /* Set the function pointer to an actual operation function */ mci->edac_check = i7core_check_error; + /* Enable scrubrate setting */ + enable_sdram_scrub_setting(mci); + /* add this new MC control structure to EDAC's list of MCs */ if (unlikely(edac_mc_add_mc(mci))) { debugf0("MC: " __FILE__ -- cgit v1.1