From 6067aaeadb5b3df26f27ac827256b1ef01e674f5 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 28 Apr 2011 15:04:31 -0700 Subject: drm/i915: split clock gating init into per-chipset functions This helps contain the mess to init_display() instead. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 337 ++++++++++++++++++++--------------- 1 file changed, 193 insertions(+), 144 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 18888a2..7eeffaf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7211,161 +7211,194 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) mutex_unlock(&dev_priv->dev->struct_mutex); } -void intel_enable_clock_gating(struct drm_device *dev) +static void ironlake_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + /* Required for FBC */ + dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | + DPFCRUNIT_CLOCK_GATE_DISABLE | + DPFDUNIT_CLOCK_GATE_DISABLE; + /* Required for CxSR */ + dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_3DCGDIS0, + MARIUNIT_CLOCK_GATE_DISABLE | + SVSMUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_3DCGDIS1, + VFMUNIT_CLOCK_GATE_DISABLE); + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + + /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + + /* + * According to the spec the following bits should be set in + * order to enable memory self-refresh + * The bit 22/21 of 0x42004 + * The bit 5 of 0x42020 + * The bit 15 of 0x45000 + */ + I915_WRITE(ILK_DISPLAY_CHICKEN2, + (I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL)); + I915_WRITE(ILK_DSPCLK_GATE, + (I915_READ(ILK_DSPCLK_GATE) | + ILK_DPARB_CLK_GATE)); + I915_WRITE(DISP_ARB_CTL, + (I915_READ(DISP_ARB_CTL) | + DISP_FBC_WM_DIS)); + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); + + /* + * Based on the document from hardware guys the following bits + * should be set unconditionally in order to enable FBC. + * The bit 22 of 0x42000 + * The bit 22 of 0x42004 + * The bit 7,8,9 of 0x42020. + */ + if (IS_IRONLAKE_M(dev)) { + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE); + I915_WRITE(ILK_DSPCLK_GATE, + I915_READ(ILK_DSPCLK_GATE) | + ILK_DPFC_DIS1 | + ILK_DPFC_DIS2 | + ILK_CLK_FBC); + } + + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); + I915_WRITE(_3D_CHICKEN2, + _3D_CHICKEN2_WM_READ_PIPELINED << 16 | + _3D_CHICKEN2_WM_READ_PIPELINED); +} + +static void gen6_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); /* - * Disable clock gating reported to work incorrectly according to the - * specs, but enable as much else as we can. + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. */ - if (HAS_PCH_SPLIT(dev)) { - uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); - if (IS_GEN5(dev)) { - /* Required for FBC */ - dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | - DPFCRUNIT_CLOCK_GATE_DISABLE | - DPFDUNIT_CLOCK_GATE_DISABLE; - /* Required for CxSR */ - dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; - - I915_WRITE(PCH_3DCGDIS0, - MARIUNIT_CLOCK_GATE_DISABLE | - SVSMUNIT_CLOCK_GATE_DISABLE); - I915_WRITE(PCH_3DCGDIS1, - VFMUNIT_CLOCK_GATE_DISABLE); - } + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_ELPIN_409_SELECT); - I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); - /* - * On Ibex Peak and Cougar Point, we need to disable clock - * gating for the panel power sequencer or it will fail to - * start up when no ports are active. - */ - I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + /* + * According to the spec the following bits should be + * set in order to enable memory self-refresh and fbc: + * The bit21 and bit22 of 0x42000 + * The bit21 and bit22 of 0x42004 + * The bit5 and bit7 of 0x42020 + * The bit14 of 0x70180 + * The bit14 of 0x71180 + */ + I915_WRITE(ILK_DISPLAY_CHICKEN1, + I915_READ(ILK_DISPLAY_CHICKEN1) | + ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); + I915_WRITE(ILK_DISPLAY_CHICKEN2, + I915_READ(ILK_DISPLAY_CHICKEN2) | + ILK_DPARB_GATE | ILK_VSDPFD_FULL); + I915_WRITE(ILK_DSPCLK_GATE, + I915_READ(ILK_DSPCLK_GATE) | + ILK_DPARB_CLK_GATE | + ILK_DPFD_CLK_GATE); - /* - * According to the spec the following bits should be set in - * order to enable memory self-refresh - * The bit 22/21 of 0x42004 - * The bit 5 of 0x42020 - * The bit 15 of 0x45000 - */ - if (IS_GEN5(dev)) { - I915_WRITE(ILK_DISPLAY_CHICKEN2, - (I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE | ILK_VSDPFD_FULL)); - I915_WRITE(ILK_DSPCLK_GATE, - (I915_READ(ILK_DSPCLK_GATE) | - ILK_DPARB_CLK_GATE)); - I915_WRITE(DISP_ARB_CTL, - (I915_READ(DISP_ARB_CTL) | - DISP_FBC_WM_DIS)); - I915_WRITE(WM3_LP_ILK, 0); - I915_WRITE(WM2_LP_ILK, 0); - I915_WRITE(WM1_LP_ILK, 0); - } - /* - * Based on the document from hardware guys the following bits - * should be set unconditionally in order to enable FBC. - * The bit 22 of 0x42000 - * The bit 22 of 0x42004 - * The bit 7,8,9 of 0x42020. - */ - if (IS_IRONLAKE_M(dev)) { - I915_WRITE(ILK_DISPLAY_CHICKEN1, - I915_READ(ILK_DISPLAY_CHICKEN1) | - ILK_FBCQ_DIS); - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE); - I915_WRITE(ILK_DSPCLK_GATE, - I915_READ(ILK_DSPCLK_GATE) | - ILK_DPFC_DIS1 | - ILK_DPFC_DIS2 | - ILK_CLK_FBC); - } + for_each_pipe(pipe) + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); +} - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_ELPIN_409_SELECT); +static void g4x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dspclk_gate; - if (IS_GEN5(dev)) { - I915_WRITE(_3D_CHICKEN2, - _3D_CHICKEN2_WM_READ_PIPELINED << 16 | - _3D_CHICKEN2_WM_READ_PIPELINED); - } + I915_WRITE(RENCLK_GATE_D1, 0); + I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | + GS_UNIT_CLOCK_GATE_DISABLE | + CL_UNIT_CLOCK_GATE_DISABLE); + I915_WRITE(RAMCLK_GATE_D, 0); + dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | + OVRUNIT_CLOCK_GATE_DISABLE | + OVCUNIT_CLOCK_GATE_DISABLE; + if (IS_GM45(dev)) + dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, dspclk_gate); +} - if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { - I915_WRITE(WM3_LP_ILK, 0); - I915_WRITE(WM2_LP_ILK, 0); - I915_WRITE(WM1_LP_ILK, 0); +static void crestline_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; - /* - * According to the spec the following bits should be - * set in order to enable memory self-refresh and fbc: - * The bit21 and bit22 of 0x42000 - * The bit21 and bit22 of 0x42004 - * The bit5 and bit7 of 0x42020 - * The bit14 of 0x70180 - * The bit14 of 0x71180 - */ - I915_WRITE(ILK_DISPLAY_CHICKEN1, - I915_READ(ILK_DISPLAY_CHICKEN1) | - ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); - I915_WRITE(ILK_DISPLAY_CHICKEN2, - I915_READ(ILK_DISPLAY_CHICKEN2) | - ILK_DPARB_GATE | ILK_VSDPFD_FULL); - I915_WRITE(ILK_DSPCLK_GATE, - I915_READ(ILK_DSPCLK_GATE) | - ILK_DPARB_CLK_GATE | - ILK_DPFD_CLK_GATE); - - for_each_pipe(pipe) - I915_WRITE(DSPCNTR(pipe), - I915_READ(DSPCNTR(pipe)) | - DISPPLANE_TRICKLE_FEED_DISABLE); - } - } else if (IS_G4X(dev)) { - uint32_t dspclk_gate; - I915_WRITE(RENCLK_GATE_D1, 0); - I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | - GS_UNIT_CLOCK_GATE_DISABLE | - CL_UNIT_CLOCK_GATE_DISABLE); - I915_WRITE(RAMCLK_GATE_D, 0); - dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | - OVRUNIT_CLOCK_GATE_DISABLE | - OVCUNIT_CLOCK_GATE_DISABLE; - if (IS_GM45(dev)) - dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; - I915_WRITE(DSPCLK_GATE_D, dspclk_gate); - } else if (IS_CRESTLINE(dev)) { - I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); - I915_WRITE(RENCLK_GATE_D2, 0); - I915_WRITE(DSPCLK_GATE_D, 0); - I915_WRITE(RAMCLK_GATE_D, 0); - I915_WRITE16(DEUC, 0); - } else if (IS_BROADWATER(dev)) { - I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | - I965_RCC_CLOCK_GATE_DISABLE | - I965_RCPB_CLOCK_GATE_DISABLE | - I965_ISC_CLOCK_GATE_DISABLE | - I965_FBC_CLOCK_GATE_DISABLE); - I915_WRITE(RENCLK_GATE_D2, 0); - } else if (IS_GEN3(dev)) { - u32 dstate = I915_READ(D_STATE); + I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); + I915_WRITE(DSPCLK_GATE_D, 0); + I915_WRITE(RAMCLK_GATE_D, 0); + I915_WRITE16(DEUC, 0); +} - dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | - DSTATE_DOT_CLOCK_GATING; - I915_WRITE(D_STATE, dstate); - } else if (IS_I85X(dev) || IS_I865G(dev)) { - I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); - } else if (IS_I830(dev)) { - I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); - } +static void broadwater_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | + I965_RCC_CLOCK_GATE_DISABLE | + I965_RCPB_CLOCK_GATE_DISABLE | + I965_ISC_CLOCK_GATE_DISABLE | + I965_FBC_CLOCK_GATE_DISABLE); + I915_WRITE(RENCLK_GATE_D2, 0); +} + +static void gen3_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dstate = I915_READ(D_STATE); + + dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | + DSTATE_DOT_CLOCK_GATING; + I915_WRITE(D_STATE, dstate); +} + +static void i85x_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); +} + +static void i830_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); } static void ironlake_teardown_rc6(struct drm_device *dev) @@ -7549,6 +7582,7 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = NULL; } dev_priv->display.fdi_link_train = ironlake_fdi_link_train; + dev_priv->display.init_clock_gating = ironlake_init_clock_gating; } else if (IS_GEN6(dev)) { if (SNB_READ_WM0_LATENCY()) { dev_priv->display.update_wm = sandybridge_update_wm; @@ -7558,6 +7592,7 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = NULL; } dev_priv->display.fdi_link_train = gen6_fdi_link_train; + dev_priv->display.init_clock_gating = gen6_init_clock_gating; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; @@ -7568,6 +7603,8 @@ static void intel_init_display(struct drm_device *dev) "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } + dev_priv->display.init_clock_gating = gen6_init_clock_gating; + } else dev_priv->display.update_wm = NULL; } else if (IS_PINEVIEW(dev)) { @@ -7585,18 +7622,30 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = NULL; } else dev_priv->display.update_wm = pineview_update_wm; - } else if (IS_G4X(dev)) + } else if (IS_G4X(dev)) { dev_priv->display.update_wm = g4x_update_wm; - else if (IS_GEN4(dev)) + dev_priv->display.init_clock_gating = g4x_init_clock_gating; + } else if (IS_GEN4(dev)) { dev_priv->display.update_wm = i965_update_wm; - else if (IS_GEN3(dev)) { + if (IS_CRESTLINE(dev)) + dev_priv->display.init_clock_gating = crestline_init_clock_gating; + else if (IS_BROADWATER(dev)) + dev_priv->display.init_clock_gating = broadwater_init_clock_gating; + } else if (IS_GEN3(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i9xx_get_fifo_size; + dev_priv->display.init_clock_gating = gen3_init_clock_gating; + } else if (IS_I865G(dev)) { + dev_priv->display.update_wm = i830_update_wm; + dev_priv->display.init_clock_gating = i85x_init_clock_gating; + dev_priv->display.get_fifo_size = i830_get_fifo_size; } else if (IS_I85X(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i85x_get_fifo_size; + dev_priv->display.init_clock_gating = i85x_init_clock_gating; } else { dev_priv->display.update_wm = i830_update_wm; + dev_priv->display.init_clock_gating = i830_init_clock_gating; if (IS_845G(dev)) dev_priv->display.get_fifo_size = i845_get_fifo_size; else @@ -7726,7 +7775,7 @@ void intel_modeset_init(struct drm_device *dev) i915_disable_vga(dev); intel_setup_outputs(dev); - intel_enable_clock_gating(dev); + dev_priv->display.init_clock_gating(dev); if (IS_IRONLAKE_M(dev)) { ironlake_enable_drps(dev); -- cgit v1.1