From 74bcc029c6ab942f252477a74102877f7d093388 Mon Sep 17 00:00:00 2001 From: mcampbellsmith Date: Wed, 20 Nov 2013 22:34:44 +1100 Subject: mali: bulk import of r3p2-01rel3 drivers from i9300-update12 Courtesy of a similar commit from OMNI ROM. Requires updated mali blobs Change-Id: I9ee55b653b57b7c390f8e0e8cd4fc068f1c751c3 --- drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h | 626 ++++++++++++++++++++++++ 1 file changed, 626 insertions(+) create mode 100644 drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h (limited to 'drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h') diff --git a/drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h b/drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h new file mode 100644 index 0000000..1f8a320 --- /dev/null +++ b/drivers/gpu/mali400/r3p2/mali/common/mali_ukk.h @@ -0,0 +1,626 @@ +/* + * Copyright (C) 2010-2012 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation, and any use by you of this program is subject to the terms of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained from Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +/** + * @file mali_ukk.h + * Defines the kernel-side interface of the user-kernel interface + */ + +#ifndef __MALI_UKK_H__ +#define __MALI_UKK_H__ + +#include "mali_osk.h" +#include "mali_uk_types.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +/** + * @addtogroup uddapi Unified Device Driver (UDD) APIs + * + * @{ + */ + +/** + * @addtogroup u_k_api UDD User/Kernel Interface (U/K) APIs + * + * - The _mali_uk functions are an abstraction of the interface to the device + * driver. On certain OSs, this would be implemented via the IOCTL interface. + * On other OSs, it could be via extension of some Device Driver Class, or + * direct function call for Bare metal/RTOSs. + * - It is important to note that: + * - The Device Driver has implemented the _mali_ukk set of functions + * - The Base Driver calls the corresponding set of _mali_uku functions. + * - What requires porting is solely the calling mechanism from User-side to + * Kernel-side, and propagating back the results. + * - Each U/K function is associated with a (group, number) pair from + * \ref _mali_uk_functions to make it possible for a common function in the + * Base Driver and Device Driver to route User/Kernel calls from/to the + * correct _mali_uk function. For example, in an IOCTL system, the IOCTL number + * would be formed based on the group and number assigned to the _mali_uk + * function, as listed in \ref _mali_uk_functions. On the user-side, each + * _mali_uku function would just make an IOCTL with the IOCTL-code being an + * encoded form of the (group, number) pair. On the kernel-side, the Device + * Driver's IOCTL handler decodes the IOCTL-code back into a (group, number) + * pair, and uses this to determine which corresponding _mali_ukk should be + * called. + * - Refer to \ref _mali_uk_functions for more information about this + * (group, number) pairing. + * - In a system where there is no distinction between user and kernel-side, + * the U/K interface may be implemented as:@code + * MALI_STATIC_INLINE _mali_osk_errcode_t _mali_uku_examplefunction( _mali_uk_examplefunction_s *args ) + * { + * return mali_ukk_examplefunction( args ); + * } + * @endcode + * - Therefore, all U/K calls behave \em as \em though they were direct + * function calls (but the \b implementation \em need \em not be a direct + * function calls) + * + * @note Naming the _mali_uk functions the same on both User and Kernel sides + * on non-RTOS systems causes debugging issues when setting breakpoints. In + * this case, it is not clear which function the breakpoint is put on. + * Therefore the _mali_uk functions in user space are prefixed with \c _mali_uku + * and in kernel space with \c _mali_ukk. The naming for the argument + * structures is unaffected. + * + * - The _mali_uk functions are synchronous. + * - Arguments to the _mali_uk functions are passed in a structure. The only + * parameter passed to the _mali_uk functions is a pointer to this structure. + * This first member of this structure, ctx, is a pointer to a context returned + * by _mali_uku_open(). For example:@code + * typedef struct + * { + * void *ctx; + * u32 number_of_cores; + * } _mali_uk_get_gp_number_of_cores_s; + * @endcode + * + * - Each _mali_uk function has its own argument structure named after the + * function. The argument is distinguished by the _s suffix. + * - The argument types are defined by the base driver and user-kernel + * interface. + * - All _mali_uk functions return a standard \ref _mali_osk_errcode_t. + * - Only arguments of type input or input/output need be initialized before + * calling a _mali_uk function. + * - Arguments of type output and input/output are only valid when the + * _mali_uk function returns \ref _MALI_OSK_ERR_OK. + * - The \c ctx member is always invalid after it has been used by a + * _mali_uk function, except for the context management functions + * + * + * \b Interface \b restrictions + * + * The requirements of the interface mean that an implementation of the + * User-kernel interface may do no 'real' work. For example, the following are + * illegal in the User-kernel implementation: + * - Calling functions necessary for operation on all systems, which would + * not otherwise get called on RTOS systems. + * - For example, a U/K interface that calls multiple _mali_ukk functions + * during one particular U/K call. This could not be achieved by the same code + * which uses direct function calls for the U/K interface. + * - Writing in values to the args members, when otherwise these members would + * not hold a useful value for a direct function call U/K interface. + * - For example, U/K interface implementation that take NULL members in + * their arguments structure from the user side, but those members are + * replaced with non-NULL values in the kernel-side of the U/K interface + * implementation. A scratch area for writing data is one such example. In this + * case, a direct function call U/K interface would segfault, because no code + * would be present to replace the NULL pointer with a meaningful pointer. + * - Note that we discourage the case where the U/K implementation changes + * a NULL argument member to non-NULL, and then the Device Driver code (outside + * of the U/K layer) re-checks this member for NULL, and corrects it when + * necessary. Whilst such code works even on direct function call U/K + * intefaces, it reduces the testing coverage of the Device Driver code. This + * is because we have no way of testing the NULL == value path on an OS + * implementation. + * + * A number of allowable examples exist where U/K interfaces do 'real' work: + * - The 'pointer switching' technique for \ref _mali_ukk_get_system_info + * - In this case, without the pointer switching on direct function call + * U/K interface, the Device Driver code still sees the same thing: a pointer + * to which it can write memory. This is because such a system has no + * distinction between a user and kernel pointer. + * - Writing an OS-specific value into the ukk_private member for + * _mali_ukk_mem_mmap(). + * - In this case, this value is passed around by Device Driver code, but + * its actual value is never checked. Device Driver code simply passes it from + * the U/K layer to the OSK layer, where it can be acted upon. In this case, + * \em some OS implementations of the U/K (_mali_ukk_mem_mmap()) and OSK + * (_mali_osk_mem_mapregion_init()) functions will collaborate on the + * meaning of ukk_private member. On other OSs, it may be unused by both + * U/K and OSK layers + * - Therefore, on error inside the U/K interface implementation itself, + * it will be as though the _mali_ukk function itself had failed, and cleaned + * up after itself. + * - Compare this to a direct function call U/K implementation, where all + * error cleanup is handled by the _mali_ukk function itself. The direct + * function call U/K interface implementation is automatically atomic. + * + * The last example highlights a consequence of all U/K interface + * implementations: they must be atomic with respect to the Device Driver code. + * And therefore, should Device Driver code succeed but the U/K implementation + * fail afterwards (but before return to user-space), then the U/K + * implementation must cause appropriate cleanup actions to preserve the + * atomicity of the interface. + * + * @{ + */ + + +/** @defgroup _mali_uk_context U/K Context management + * + * These functions allow for initialisation of the user-kernel interface once per process. + * + * Generally the context will store the OS specific object to communicate with the kernel device driver and further + * state information required by the specific implementation. The context is shareable among all threads in the caller process. + * + * On IOCTL systems, this is likely to be a file descriptor as a result of opening the kernel device driver. + * + * On a bare-metal/RTOS system with no distinction between kernel and + * user-space, the U/K interface simply calls the _mali_ukk variant of the + * function by direct function call. In this case, the context returned is the + * mali_session_data from _mali_ukk_open(). + * + * The kernel side implementations of the U/K interface expect the first member of the argument structure to + * be the context created by _mali_uku_open(). On some OS implementations, the meaning of this context + * will be different between user-side and kernel-side. In which case, the kernel-side will need to replace this context + * with the kernel-side equivalent, because user-side will not have access to kernel-side data. The context parameter + * in the argument structure therefore has to be of type input/output. + * + * It should be noted that the caller cannot reuse the \c ctx member of U/K + * argument structure after a U/K call, because it may be overwritten. Instead, + * the context handle must always be stored elsewhere, and copied into + * the appropriate U/K argument structure for each user-side call to + * the U/K interface. This is not usually a problem, since U/K argument + * structures are usually placed on the stack. + * + * @{ */ + +/** @brief Begin a new Mali Device Driver session + * + * This is used to obtain a per-process context handle for all future U/K calls. + * + * @param context pointer to storage to return a (void*)context handle. + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_open( void **context ); + +/** @brief End a Mali Device Driver session + * + * This should be called when the process no longer requires use of the Mali Device Driver. + * + * The context handle must not be used after it has been closed. + * + * @param context pointer to a stored (void*)context handle. + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_close( void **context ); + +/** @} */ /* end group _mali_uk_context */ + + +/** @addtogroup _mali_uk_core U/K Core + * + * The core functions provide the following functionality: + * - verify that the user and kernel API are compatible + * - retrieve information about the cores and memory banks in the system + * - wait for the result of jobs started on a core + * + * @{ */ + +/** @brief Waits for a job notification. + * + * Sleeps until notified or a timeout occurs. Returns information about the notification. + * + * @param args see _mali_uk_wait_for_notification_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_wait_for_notification( _mali_uk_wait_for_notification_s *args ); + +/** @brief Post a notification to the notification queue of this application. + * + * @param args see _mali_uk_post_notification_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_post_notification( _mali_uk_post_notification_s *args ); + +/** @brief Verifies if the user and kernel side of this API are compatible. + * + * @param args see _mali_uk_get_api_version_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_get_api_version( _mali_uk_get_api_version_s *args ); + +/** @brief Get the user space settings applicable for calling process. + * + * @param args see _mali_uk_get_user_settings_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_get_user_settings(_mali_uk_get_user_settings_s *args); + +/** @brief Get a user space setting applicable for calling process. + * + * @param args see _mali_uk_get_user_setting_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_get_user_setting(_mali_uk_get_user_setting_s *args); + +/** @} */ /* end group _mali_uk_core */ + + +/** @addtogroup _mali_uk_memory U/K Memory + * + * The memory functions provide functionality with and without a Mali-MMU present. + * + * For Mali-MMU based systems, the following functionality is provided: + * - Initialize and terminate MALI virtual address space + * - Allocate/deallocate physical memory to a MALI virtual address range and map into/unmap from the + * current process address space + * - Map/unmap external physical memory into the MALI virtual address range + * + * For Mali-nonMMU based systems: + * - Allocate/deallocate MALI memory + * + * @{ */ + +/** + * @brief Initialize the Mali-MMU Memory system + * + * For Mali-MMU builds of the drivers, this function must be called before any + * other functions in the \ref _mali_uk_memory group are called. + * + * @note This function is for Mali-MMU builds \b only. It should not be called + * when the drivers are built without Mali-MMU support. + * + * @param args see \ref _mali_uk_init_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable + * _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_init_mem( _mali_uk_init_mem_s *args ); + +/** + * @brief Terminate the MMU Memory system + * + * For Mali-MMU builds of the drivers, this function must be called when + * functions in the \ref _mali_uk_memory group will no longer be called. This + * function must be called before the application terminates. + * + * @note This function is for Mali-MMU builds \b only. It should not be called + * when the drivers are built without Mali-MMU support. + * + * @param args see \ref _mali_uk_term_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable + * _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_term_mem( _mali_uk_term_mem_s *args ); + +/** @brief Map Mali Memory into the current user process + * + * Maps Mali memory into the current user process in a generic way. + * + * This function is to be used for Mali-MMU mode. The function is available in both Mali-MMU and Mali-nonMMU modes, + * but should not be called by a user process in Mali-nonMMU mode. + * + * The implementation and operation of _mali_ukk_mem_mmap() is dependant on whether the driver is built for Mali-MMU + * or Mali-nonMMU: + * - In the nonMMU case, _mali_ukk_mem_mmap() requires a physical address to be specified. For this reason, an OS U/K + * implementation should not allow this to be called from user-space. In any case, nonMMU implementations are + * inherently insecure, and so the overall impact is minimal. Mali-MMU mode should be used if security is desired. + * - In the MMU case, _mali_ukk_mem_mmap() the _mali_uk_mem_mmap_s::phys_addr + * member is used for the \em Mali-virtual address desired for the mapping. The + * implementation of _mali_ukk_mem_mmap() will allocate both the CPU-virtual + * and CPU-physical addresses, and can cope with mapping a contiguous virtual + * address range to a sequence of non-contiguous physical pages. In this case, + * the CPU-physical addresses are not communicated back to the user-side, as + * they are unnecsessary; the \em Mali-virtual address range must be used for + * programming Mali structures. + * + * In the second (MMU) case, _mali_ukk_mem_mmap() handles management of + * CPU-virtual and CPU-physical ranges, but the \em caller must manage the + * \em Mali-virtual address range from the user-side. + * + * @note Mali-virtual address ranges are entirely separate between processes. + * It is not possible for a process to accidentally corrupt another process' + * \em Mali-virtual address space. + * + * @param args see _mali_uk_mem_mmap_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_mem_mmap( _mali_uk_mem_mmap_s *args ); + +/** @brief Unmap Mali Memory from the current user process + * + * Unmaps Mali memory from the current user process in a generic way. This only operates on Mali memory supplied + * from _mali_ukk_mem_mmap(). + * + * @param args see _mali_uk_mem_munmap_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_mem_munmap( _mali_uk_mem_munmap_s *args ); + +/** @brief Determine the buffer size necessary for an MMU page table dump. + * @param args see _mali_uk_query_mmu_page_table_dump_size_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_query_mmu_page_table_dump_size( _mali_uk_query_mmu_page_table_dump_size_s *args ); +/** @brief Dump MMU Page tables. + * @param args see _mali_uk_dump_mmu_page_table_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_dump_mmu_page_table( _mali_uk_dump_mmu_page_table_s * args ); + +/** @brief Write user data to specified Mali memory without causing segfaults. + * @param args see _mali_uk_mem_write_safe_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_mem_write_safe( _mali_uk_mem_write_safe_s *args ); + +/** @brief Map a physically contiguous range of memory into Mali + * @param args see _mali_uk_map_external_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_map_external_mem( _mali_uk_map_external_mem_s *args ); + +/** @brief Unmap a physically contiguous range of memory from Mali + * @param args see _mali_uk_unmap_external_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_unmap_external_mem( _mali_uk_unmap_external_mem_s *args ); + +#if defined(CONFIG_MALI400_UMP) +/** @brief Map UMP memory into Mali + * @param args see _mali_uk_attach_ump_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_attach_ump_mem( _mali_uk_attach_ump_mem_s *args ); +/** @brief Unmap UMP memory from Mali + * @param args see _mali_uk_release_ump_mem_s in mali_utgard_uk_types.h + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_release_ump_mem( _mali_uk_release_ump_mem_s *args ); +#endif /* CONFIG_MALI400_UMP */ + +/** @brief Determine virtual-to-physical mapping of a contiguous memory range + * (optional) + * + * This allows the user-side to do a virtual-to-physical address translation. + * In conjunction with _mali_uku_map_external_mem, this can be used to do + * direct rendering. + * + * This function will only succeed on a virtual range that is mapped into the + * current process, and that is contigious. + * + * If va is not page-aligned, then it is rounded down to the next page + * boundary. The remainer is added to size, such that ((u32)va)+size before + * rounding is equal to ((u32)va)+size after rounding. The rounded modified + * va and size will be written out into args on success. + * + * If the supplied size is zero, or not a multiple of the system's PAGE_SIZE, + * then size will be rounded up to the next multiple of PAGE_SIZE before + * translation occurs. The rounded up size will be written out into args on + * success. + * + * On most OSs, virtual-to-physical address translation is a priveledged + * function. Therefore, the implementer must validate the range supplied, to + * ensure they are not providing arbitrary virtual-to-physical address + * translations. While it is unlikely such a mechanism could be used to + * compromise the security of a system on its own, it is possible it could be + * combined with another small security risk to cause a much larger security + * risk. + * + * @note This is an optional part of the interface, and is only used by certain + * implementations of libEGL. If the platform layer in your libEGL + * implementation does not require Virtual-to-Physical address translation, + * then this function need not be implemented. A stub implementation should not + * be required either, as it would only be removed by the compiler's dead code + * elimination. + * + * @note if implemented, this function is entirely platform-dependant, and does + * not exist in common code. + * + * @param args see _mali_uk_va_to_mali_pa_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_va_to_mali_pa( _mali_uk_va_to_mali_pa_s * args ); + +/** @} */ /* end group _mali_uk_memory */ + + +/** @addtogroup _mali_uk_pp U/K Fragment Processor + * + * The Fragment Processor (aka PP (Pixel Processor)) functions provide the following functionality: + * - retrieving version of the fragment processors + * - determine number of fragment processors + * - starting a job on a fragment processor + * + * @{ */ + +/** @brief Issue a request to start a new job on a Fragment Processor. + * + * If the request fails args->status is set to _MALI_UK_START_JOB_NOT_STARTED_DO_REQUEUE and you can + * try to start the job again. + * + * An existing job could be returned for requeueing if the new job has a higher priority than a previously started job + * which the hardware hasn't actually started processing yet. In this case the new job will be started instead and the + * existing one returned, otherwise the new job is started and the status field args->status is set to + * _MALI_UK_START_JOB_STARTED. + * + * Job completion can be awaited with _mali_ukk_wait_for_notification(). + * + * @oaram ctx user-kernel context (mali_session) + * @param uargs see _mali_uk_pp_start_job_s in "mali_utgard_uk_types.h". Use _mali_osk_copy_from_user to retrieve data! + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_pp_start_job( void *ctx, _mali_uk_pp_start_job_s *uargs, int *fence ); + +/** @brief Returns the number of Fragment Processors in the system + * + * @param args see _mali_uk_get_pp_number_of_cores_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_get_pp_number_of_cores( _mali_uk_get_pp_number_of_cores_s *args ); + +/** @brief Returns the version that all Fragment Processor cores are compatible with. + * + * This function may only be called when _mali_ukk_get_pp_number_of_cores() indicated at least one Fragment + * Processor core is available. + * + * @param args see _mali_uk_get_pp_core_version_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_get_pp_core_version( _mali_uk_get_pp_core_version_s *args ); + +/** @brief Disable Write-back unit(s) on specified job + * + * @param args see _mali_uk_get_pp_core_version_s in "mali_utgard_uk_types.h" + */ +void _mali_ukk_pp_job_disable_wb(_mali_uk_pp_disable_wb_s *args); + + +/** @} */ /* end group _mali_uk_pp */ + + +/** @addtogroup _mali_uk_gp U/K Vertex Processor + * + * The Vertex Processor (aka GP (Geometry Processor)) functions provide the following functionality: + * - retrieving version of the Vertex Processors + * - determine number of Vertex Processors available + * - starting a job on a Vertex Processor + * + * @{ */ + +/** @brief Issue a request to start a new job on a Vertex Processor. + * + * If the request fails args->status is set to _MALI_UK_START_JOB_NOT_STARTED_DO_REQUEUE and you can + * try to start the job again. + * + * An existing job could be returned for requeueing if the new job has a higher priority than a previously started job + * which the hardware hasn't actually started processing yet. In this case the new job will be started and the + * existing one returned, otherwise the new job is started and the status field args->status is set to + * _MALI_UK_START_JOB_STARTED. + * + * Job completion can be awaited with _mali_ukk_wait_for_notification(). + * + * @oaram ctx user-kernel context (mali_session) + * @param uargs see _mali_uk_gp_start_job_s in "mali_utgard_uk_types.h". Use _mali_osk_copy_from_user to retrieve data! + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_gp_start_job( void *ctx, _mali_uk_gp_start_job_s *uargs ); + +/** @brief Returns the number of Vertex Processors in the system. + * + * @param args see _mali_uk_get_gp_number_of_cores_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_get_gp_number_of_cores( _mali_uk_get_gp_number_of_cores_s *args ); + +/** @brief Returns the version that all Vertex Processor cores are compatible with. + * + * This function may only be called when _mali_uk_get_gp_number_of_cores() indicated at least one Vertex + * Processor core is available. + * + * @param args see _mali_uk_get_gp_core_version_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_get_gp_core_version( _mali_uk_get_gp_core_version_s *args ); + +/** @brief Resume or abort suspended Vertex Processor jobs. + * + * After receiving notification that a Vertex Processor job was suspended from + * _mali_ukk_wait_for_notification() you can use this function to resume or abort the job. + * + * @param args see _mali_uk_gp_suspend_response_s in "mali_utgard_uk_types.h" + * @return _MALI_OSK_ERR_OK on success, otherwise a suitable _mali_osk_errcode_t on failure. + */ +_mali_osk_errcode_t _mali_ukk_gp_suspend_response( _mali_uk_gp_suspend_response_s *args ); + +/** @} */ /* end group _mali_uk_gp */ + +#if defined(CONFIG_MALI400_PROFILING) +/** @addtogroup _mali_uk_profiling U/K Timeline profiling module + * @{ */ + +/** @brief Start recording profiling events. + * + * @param args see _mali_uk_profiling_start_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_profiling_start(_mali_uk_profiling_start_s *args); + +/** @brief Add event to profiling buffer. + * + * @param args see _mali_uk_profiling_add_event_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_profiling_add_event(_mali_uk_profiling_add_event_s *args); + +/** @brief Stop recording profiling events. + * + * @param args see _mali_uk_profiling_stop_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_profiling_stop(_mali_uk_profiling_stop_s *args); + +/** @brief Retrieve a recorded profiling event. + * + * @param args see _mali_uk_profiling_get_event_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_profiling_get_event(_mali_uk_profiling_get_event_s *args); + +/** @brief Clear recorded profiling events. + * + * @param args see _mali_uk_profiling_clear_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_profiling_clear(_mali_uk_profiling_clear_s *args); + +/** @} */ /* end group _mali_uk_profiling */ +#endif + +/** @addtogroup _mali_uk_vsync U/K VSYNC reporting module + * @{ */ + +/** @brief Report events related to vsync. + * + * @note Events should be reported when starting to wait for vsync and when the + * waiting is finished. This information can then be used in kernel space to + * complement the GPU utilization metric. + * + * @param args see _mali_uk_vsync_event_report_s in "mali_utgard_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_vsync_event_report(_mali_uk_vsync_event_report_s *args); + +/** @} */ /* end group _mali_uk_vsync */ + +/** @addtogroup _mali_sw_counters_report U/K Software counter reporting + * @{ */ + +/** @brief Report software counters. + * + * @param args see _mali_uk_sw_counters_report_s in "mali_uk_types.h" + */ +_mali_osk_errcode_t _mali_ukk_sw_counters_report(_mali_uk_sw_counters_report_s *args); + +/** @} */ /* end group _mali_sw_counters_report */ + +/** @} */ /* end group u_k_api */ + +/** @} */ /* end group uddapi */ + +u32 _mali_ukk_report_memory_usage(void); + +u32 _mali_ukk_utilization_gp_pp(void); + +u32 _mali_ukk_utilization_gp(void); + +u32 _mali_ukk_utilization_pp(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __MALI_UKK_H__ */ -- cgit v1.1