From 6e34b187bc216fc632769fb8b906d3a29ccd8f14 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Wed, 7 Jan 2009 16:37:32 +0100 Subject: hwmon: Add LTC4245 driver Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: Ira W. Snyder Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/ltc4245.c | 567 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 567 insertions(+) create mode 100644 drivers/hwmon/ltc4245.c (limited to 'drivers/hwmon/ltc4245.c') diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c new file mode 100644 index 0000000..034b2c5 --- /dev/null +++ b/drivers/hwmon/ltc4245.c @@ -0,0 +1,567 @@ +/* + * Driver for Linear Technology LTC4245 I2C Multiple Supply Hot Swap Controller + * + * Copyright (C) 2008 Ira W. Snyder + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This driver is based on the ds1621 and ina209 drivers. + * + * Datasheet: + * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Valid addresses are 0x20 - 0x3f + * + * For now, we do not probe, since some of these addresses + * are known to be unfriendly to probing */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ltc4245); + +/* Here are names of the chip's registers (a.k.a. commands) */ +enum ltc4245_cmd { + LTC4245_STATUS = 0x00, /* readonly */ + LTC4245_ALERT = 0x01, + LTC4245_CONTROL = 0x02, + LTC4245_ON = 0x03, + LTC4245_FAULT1 = 0x04, + LTC4245_FAULT2 = 0x05, + LTC4245_GPIO = 0x06, + LTC4245_ADCADR = 0x07, + + LTC4245_12VIN = 0x10, + LTC4245_12VSENSE = 0x11, + LTC4245_12VOUT = 0x12, + LTC4245_5VIN = 0x13, + LTC4245_5VSENSE = 0x14, + LTC4245_5VOUT = 0x15, + LTC4245_3VIN = 0x16, + LTC4245_3VSENSE = 0x17, + LTC4245_3VOUT = 0x18, + LTC4245_VEEIN = 0x19, + LTC4245_VEESENSE = 0x1a, + LTC4245_VEEOUT = 0x1b, + LTC4245_GPIOADC1 = 0x1c, + LTC4245_GPIOADC2 = 0x1d, + LTC4245_GPIOADC3 = 0x1e, +}; + +struct ltc4245_data { + struct device *hwmon_dev; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* Control registers */ + u8 cregs[0x08]; + + /* Voltage registers */ + u8 vregs[0x0f]; +}; + +static struct ltc4245_data *ltc4245_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ltc4245_data *data = i2c_get_clientdata(client); + s32 val; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + + dev_dbg(&client->dev, "Starting ltc4245 update\n"); + + /* Read control registers -- 0x00 to 0x07 */ + for (i = 0; i < ARRAY_SIZE(data->cregs); i++) { + val = i2c_smbus_read_byte_data(client, i); + if (unlikely(val < 0)) + data->cregs[i] = 0; + else + data->cregs[i] = val; + } + + /* Read voltage registers -- 0x10 to 0x1f */ + for (i = 0; i < ARRAY_SIZE(data->vregs); i++) { + val = i2c_smbus_read_byte_data(client, i+0x10); + if (unlikely(val < 0)) + data->vregs[i] = 0; + else + data->vregs[i] = val; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* Return the voltage from the given register in millivolts */ +static int ltc4245_get_voltage(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + u32 voltage = 0; + + switch (reg) { + case LTC4245_12VIN: + case LTC4245_12VOUT: + voltage = regval * 55; + break; + case LTC4245_5VIN: + case LTC4245_5VOUT: + voltage = regval * 22; + break; + case LTC4245_3VIN: + case LTC4245_3VOUT: + voltage = regval * 15; + break; + case LTC4245_VEEIN: + case LTC4245_VEEOUT: + voltage = regval * -55; + break; + case LTC4245_GPIOADC1: + case LTC4245_GPIOADC2: + case LTC4245_GPIOADC3: + voltage = regval * 10; + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return voltage; +} + +/* Return the current in the given sense register in milliAmperes */ +static unsigned int ltc4245_get_current(struct device *dev, u8 reg) +{ + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 regval = data->vregs[reg - 0x10]; + unsigned int voltage; + unsigned int curr; + + /* The strange looking conversions that follow are fixed-point + * math, since we cannot do floating point in the kernel. + * + * Step 1: convert sense register to microVolts + * Step 2: convert voltage to milliAmperes + * + * If you play around with the V=IR equation, you come up with + * the following: X uV / Y mOhm == Z mA + * + * With the resistors that are fractions of a milliOhm, we multiply + * the voltage and resistance by 10, to shift the decimal point. + * Now we can use the normal division operator again. + */ + + switch (reg) { + case LTC4245_12VSENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 50; /* sense resistor 50 mOhm */ + break; + case LTC4245_5VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 35; /* sense resistor 3.5 mOhm */ + break; + case LTC4245_3VSENSE: + voltage = regval * 125; /* voltage in uV */ + curr = (voltage * 10) / 25; /* sense resistor 2.5 mOhm */ + break; + case LTC4245_VEESENSE: + voltage = regval * 250; /* voltage in uV */ + curr = voltage / 100; /* sense resistor 100 mOhm */ + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + curr = 0; + break; + } + + return curr; +} + +static ssize_t ltc4245_show_voltage(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const int voltage = ltc4245_get_voltage(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%d\n", voltage); +} + +static ssize_t ltc4245_show_current(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%u\n", curr); +} + +static ssize_t ltc4245_show_power(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const unsigned int curr = ltc4245_get_current(dev, attr->index); + const int output_voltage = ltc4245_get_voltage(dev, attr->index+1); + + /* current in mA * voltage in mV == power in uW */ + const unsigned int power = abs(output_voltage * curr); + + return snprintf(buf, PAGE_SIZE, "%u\n", power); +} + +static ssize_t ltc4245_show_alarm(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); + struct ltc4245_data *data = ltc4245_update_device(dev); + const u8 reg = data->cregs[attr->index]; + const u32 mask = attr->nr; + + return snprintf(buf, PAGE_SIZE, "%u\n", (reg & mask) ? 1 : 0); +} + +/* These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +#define LTC4245_VOLTAGE(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_voltage, NULL, ltc4245_cmd_idx) + +#define LTC4245_CURRENT(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_current, NULL, ltc4245_cmd_idx) + +#define LTC4245_POWER(name, ltc4245_cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, \ + ltc4245_show_power, NULL, ltc4245_cmd_idx) + +#define LTC4245_ALARM(name, mask, reg) \ + static SENSOR_DEVICE_ATTR_2(name, S_IRUGO, \ + ltc4245_show_alarm, NULL, (mask), reg) + +/* Construct a sensor_device_attribute structure for each register */ + +/* Input voltages */ +LTC4245_VOLTAGE(in1_input, LTC4245_12VIN); +LTC4245_VOLTAGE(in2_input, LTC4245_5VIN); +LTC4245_VOLTAGE(in3_input, LTC4245_3VIN); +LTC4245_VOLTAGE(in4_input, LTC4245_VEEIN); + +/* Input undervoltage alarms */ +LTC4245_ALARM(in1_min_alarm, (1 << 0), LTC4245_FAULT1); +LTC4245_ALARM(in2_min_alarm, (1 << 1), LTC4245_FAULT1); +LTC4245_ALARM(in3_min_alarm, (1 << 2), LTC4245_FAULT1); +LTC4245_ALARM(in4_min_alarm, (1 << 3), LTC4245_FAULT1); + +/* Currents (via sense resistor) */ +LTC4245_CURRENT(curr1_input, LTC4245_12VSENSE); +LTC4245_CURRENT(curr2_input, LTC4245_5VSENSE); +LTC4245_CURRENT(curr3_input, LTC4245_3VSENSE); +LTC4245_CURRENT(curr4_input, LTC4245_VEESENSE); + +/* Overcurrent alarms */ +LTC4245_ALARM(curr1_max_alarm, (1 << 4), LTC4245_FAULT1); +LTC4245_ALARM(curr2_max_alarm, (1 << 5), LTC4245_FAULT1); +LTC4245_ALARM(curr3_max_alarm, (1 << 6), LTC4245_FAULT1); +LTC4245_ALARM(curr4_max_alarm, (1 << 7), LTC4245_FAULT1); + +/* Output voltages */ +LTC4245_VOLTAGE(in5_input, LTC4245_12VOUT); +LTC4245_VOLTAGE(in6_input, LTC4245_5VOUT); +LTC4245_VOLTAGE(in7_input, LTC4245_3VOUT); +LTC4245_VOLTAGE(in8_input, LTC4245_VEEOUT); + +/* Power Bad alarms */ +LTC4245_ALARM(in5_min_alarm, (1 << 0), LTC4245_FAULT2); +LTC4245_ALARM(in6_min_alarm, (1 << 1), LTC4245_FAULT2); +LTC4245_ALARM(in7_min_alarm, (1 << 2), LTC4245_FAULT2); +LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2); + +/* GPIO voltages */ +LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC1); +LTC4245_VOLTAGE(in10_input, LTC4245_GPIOADC2); +LTC4245_VOLTAGE(in11_input, LTC4245_GPIOADC3); + +/* Power Consumption (virtual) */ +LTC4245_POWER(power1_input, LTC4245_12VSENSE); +LTC4245_POWER(power2_input, LTC4245_5VSENSE); +LTC4245_POWER(power3_input, LTC4245_3VSENSE); +LTC4245_POWER(power4_input, LTC4245_VEESENSE); + +/* Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *ltc4245_attributes[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + &sensor_dev_attr_in3_min_alarm.dev_attr.attr, + &sensor_dev_attr_in4_min_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr2_input.dev_attr.attr, + &sensor_dev_attr_curr3_input.dev_attr.attr, + &sensor_dev_attr_curr4_input.dev_attr.attr, + + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr2_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr3_max_alarm.dev_attr.attr, + &sensor_dev_attr_curr4_max_alarm.dev_attr.attr, + + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + + &sensor_dev_attr_in5_min_alarm.dev_attr.attr, + &sensor_dev_attr_in6_min_alarm.dev_attr.attr, + &sensor_dev_attr_in7_min_alarm.dev_attr.attr, + &sensor_dev_attr_in8_min_alarm.dev_attr.attr, + + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_power2_input.dev_attr.attr, + &sensor_dev_attr_power3_input.dev_attr.attr, + &sensor_dev_attr_power4_input.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group ltc4245_group = { + .attrs = ltc4245_attributes, +}; + +static int ltc4245_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ltc4245_data *data; + int ret; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto out_kzalloc; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Initialize the LTC4245 chip */ + /* TODO */ + + /* Register sysfs hooks */ + ret = sysfs_create_group(&client->dev.kobj, <c4245_group); + if (ret) + goto out_sysfs_create_group; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_hwmon_device_register; + } + + return 0; + +out_hwmon_device_register: + sysfs_remove_group(&client->dev.kobj, <c4245_group); +out_sysfs_create_group: + kfree(data); +out_kzalloc: + return ret; +} + +static int ltc4245_remove(struct i2c_client *client) +{ + struct ltc4245_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, <c4245_group); + + kfree(data); + + return 0; +} + +/* Check that some bits in a control register appear at all possible + * locations without changing value + * + * @client: the i2c client to use + * @reg: the register to read + * @bits: the bits to check (0xff checks all bits, + * 0x03 checks only the last two bits) + * + * return -ERRNO if the register read failed + * return -ENODEV if the register value doesn't stay constant at all + * possible addresses + * + * return 0 for success + */ +static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits) +{ + int i; + s32 v, voff1, voff2; + + /* Read register and check for error */ + v = i2c_smbus_read_byte_data(client, reg); + if (v < 0) + return v; + + v &= bits; + + for (i = 0x00; i < 0xff; i += 0x20) { + + voff1 = i2c_smbus_read_byte_data(client, reg + i); + if (voff1 < 0) + return voff1; + + voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08); + if (voff2 < 0) + return voff2; + + voff1 &= bits; + voff2 &= bits; + + if (v != voff1 || v != voff2) + return -ENODEV; + } + + return 0; +} + +static int ltc4245_detect(struct i2c_client *client, + int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind < 0) { /* probed detection - check the chip type */ + s32 v; /* 8 bits from the chip, or -ERRNO */ + + /* Chip registers 0x00-0x07 are control registers + * Chip registers 0x10-0x1f are data registers + * + * Address bits b7-b5 are ignored. This makes the chip "repeat" + * in steps of 0x20. Any control registers should appear with + * the same values across all duplicated addresses. + * + * Register 0x02 bit b2 is reserved, expect 0 + * Register 0x07 bits b7 to b4 are reserved, expect 0 + * + * Registers 0x01, 0x02 are control registers and should not + * change on their own. + * + * Register 0x06 bits b6 and b7 are control bits, and should + * not change on their own. + * + * Register 0x07 bits b3 to b0 are control bits, and should + * not change on their own. + */ + + /* read register 0x02 reserved bit, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL); + if (v < 0 || (v & 0x04) != 0) + return -ENODEV; + + /* read register 0x07 reserved bits, expect 0 */ + v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR); + if (v < 0 || (v & 0xf0) != 0) + return -ENODEV; + + /* check that the alert register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff)) + return -ENODEV; + + /* check that the control register appears at all locations */ + if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff)) + return -ENODEV; + + /* check that register 0x06 bits b6 and b7 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0)) + return -ENODEV; + + /* check that register 0x07 bits b3-b0 stay constant */ + if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f)) + return -ENODEV; + } + + strlcpy(info->type, "ltc4245", I2C_NAME_SIZE); + dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n", + kind < 0 ? "probed" : "forced", + client->addr); + + return 0; +} + +static const struct i2c_device_id ltc4245_id[] = { + { "ltc4245", ltc4245 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc4245_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ltc4245_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ltc4245", + }, + .probe = ltc4245_probe, + .remove = ltc4245_remove, + .id_table = ltc4245_id, + .detect = ltc4245_detect, + .address_data = &addr_data, +}; + +static int __init ltc4245_init(void) +{ + return i2c_add_driver(<c4245_driver); +} + +static void __exit ltc4245_exit(void) +{ + i2c_del_driver(<c4245_driver); +} + +MODULE_AUTHOR("Ira W. Snyder "); +MODULE_DESCRIPTION("LTC4245 driver"); +MODULE_LICENSE("GPL"); + +module_init(ltc4245_init); +module_exit(ltc4245_exit); -- cgit v1.1