From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/macintosh/Kconfig | 198 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+) create mode 100644 drivers/macintosh/Kconfig (limited to 'drivers/macintosh/Kconfig') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig new file mode 100644 index 0000000..8a7117a --- /dev/null +++ b/drivers/macintosh/Kconfig @@ -0,0 +1,198 @@ + +menu "Macintosh device drivers" + depends on PPC || MAC + +config ADB + bool "Apple Desktop Bus (ADB) support" + depends on MAC || PPC_PMAC + help + Apple Desktop Bus (ADB) support is for support of devices which + are connected to an ADB port. ADB devices tend to have 4 pins. + If you have an Apple Macintosh prior to the iMac, an iBook or + PowerBook, or a "Blue and White G3", you probably want to say Y + here. Otherwise say N. + +config ADB_MACII + bool "Include Mac II ADB driver" + depends on ADB && MAC + help + Say Y here if want your kernel to support Macintosh systems that use + the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, + Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and + Centris 650. + +config ADB_MACIISI + bool "Include Mac IIsi ADB driver" + depends on ADB && MAC + help + Say Y here if want your kernel to support Macintosh systems that use + the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic + II, LC, LC II, LC III, Performa 460, and the Performa 600. + +config ADB_IOP + bool "Include IOP (IIfx/Quadra 9x0) ADB driver" + depends on ADB && MAC + help + The I/O Processor (IOP) is an Apple custom IC designed to provide + intelligent support for I/O controllers. It is described at + to enable direct + support for it, say 'Y' here. + +config ADB_PMU68K + bool "Include PMU (Powerbook) ADB driver" + depends on ADB && MAC + help + Say Y here if want your kernel to support the m68k based Powerbooks. + This includes the PowerBook 140, PowerBook 145, PowerBook 150, + PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, + PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, + PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, + PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. + +# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU +config ADB_CUDA + bool "Support for CUDA based Macs and PowerMacs" + depends on (ADB || PPC_PMAC) && !PPC_PMAC64 + help + This provides support for CUDA based Macintosh and Power Macintosh + systems. This includes many m68k based Macs (Color Classic, Mac TV, + Performa 475, Performa 520, Performa 550, Performa 575, + Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and + Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, + the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later + models should use CONFIG_ADB_PMU instead. It is safe to say Y here + even if your machine doesn't have a CUDA. + + If unsure say Y. + +config ADB_PMU + bool "Support for PMU based PowerMacs" + depends on PPC_PMAC + help + On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the + PMU is an embedded microprocessor whose primary function is to + control system power, and battery charging on the portable models. + The PMU also controls the ADB (Apple Desktop Bus) which connects to + the keyboard and mouse on some machines, as well as the non-volatile + RAM and the RTC (real time clock) chip. Say Y to enable support for + this device; you should do so if your machine is one of those + mentioned above. + +config PMAC_SMU + bool "Support for SMU based PowerMacs" + depends on PPC_PMAC64 + help + This option adds support for the newer G5 iMacs and PowerMacs based + on the "SMU" system control chip which replaces the old PMU. + If you don't know, say Y. + +config PMAC_PBOOK + bool "Power management support for PowerBooks" + depends on ADB_PMU + ---help--- + This provides support for putting a PowerBook to sleep; it also + enables media bay support. Power management works on the + PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and + the Titanium Powerbook G4, as well as the iBooks. You should get + the power management daemon, pmud, to make it work and you must have + the /dev/pmu device (see the pmud README). + + Get pmud from . + + If you have a PowerBook, you should say Y here. + + You may also want to compile the dma sound driver as a module and + have it autoloaded. The act of removing the module shuts down the + sound hardware for more power savings. + +config PM + bool + depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK + default y + +config PMAC_APM_EMU + tristate "APM emulation" + depends on PMAC_PBOOK + +# made a separate option since backlight may end up beeing used +# on non-powerbook machines (but only on PMU based ones AFAIK) +config PMAC_BACKLIGHT + bool "Backlight control for LCD screens" + depends on ADB_PMU + help + Say Y here to build in code to manage the LCD backlight on a + Macintosh PowerBook. With this code, the backlight will be turned + on and off appropriately on power-management and lid-open/lid-closed + events; also, the PowerBook button device will be enabled so you can + change the screen brightness. + +config MAC_SERIAL + tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)" + depends on PPC_PMAC && BROKEN + help + This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in + "Character devices --> Serial drivers --> PowerMac z85c30" option. + +config ADB_MACIO + bool "Include MacIO (CHRP) ADB driver" + depends on ADB && PPC_CHRP && !PPC_PMAC64 + help + Say Y here to include direct support for the ADB controller in the + Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra + also includes a MESH II SCSI controller, DBDMA controller, VIA chip, + OpenPIC controller and two RS422/Geoports.) + +config INPUT_ADBHID + bool "Support for ADB input devices (keyboard, mice, ...)" + depends on ADB && INPUT=y + help + Say Y here if you want to have ADB (Apple Desktop Bus) HID devices + such as keyboards, mice, joysticks, trackpads or graphic tablets + handled by the input layer. If you say Y here, make sure to say Y to + the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), + "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface + support" (CONFIG_INPUT_EVDEV) as well. + + If unsure, say Y. + +config MAC_EMUMOUSEBTN + bool "Support for mouse button 2+3 emulation" + depends on INPUT_ADBHID + help + This provides generic support for emulating the 2nd and 3rd mouse + button with keypresses. If you say Y here, the emulation is still + disabled by default. The emulation is controlled by these sysctl + entries: + /proc/sys/dev/mac_hid/mouse_button_emulation + /proc/sys/dev/mac_hid/mouse_button2_keycode + /proc/sys/dev/mac_hid/mouse_button3_keycode + + If you have an Apple machine with a 1-button mouse, say Y here. + +config THERM_WINDTUNNEL + tristate "Support for thermal management on Windtunnel G4s" + depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 + help + This driver provides some thermostat and fan control for the desktop + G4 "Windtunnel" + +config THERM_ADT746X + tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" + depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 + help + This driver provides some thermostat and fan control for the + iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty + better fan behaviour by default, and some manual control. + +config THERM_PM72 + tristate "Support for thermal management on PowerMac G5" + depends on I2C && I2C_KEYWEST && PPC_PMAC64 + help + This driver provides thermostat and fan control for the desktop + G5 machines. + +config ANSLCD + tristate "Support for ANS LCD display" + depends on ADB_CUDA && PPC_PMAC + +endmenu -- cgit v1.1