From 6ca187abb2fc1a52b2a8e0422f3ffce2e3bb7ad0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 15 Jan 2009 05:53:18 -0300 Subject: V4L/DVB (10251): cx25840: add comments explaining what the init() does. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/media/video/cx25840') diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 25eb3bec..be467b4 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1101,6 +1101,16 @@ static void log_audio_status(struct i2c_client *client) /* ----------------------------------------------------------------------- */ +/* This init operation must be called to load the driver's firmware. + Without this the audio standard detection will fail and you will + only get mono. + + Since loading the firmware is often problematic when the driver is + compiled into the kernel I recommend postponing calling this function + until the first open of the video device. Another reason for + postponing it is that loading this firmware takes a long time (seconds) + due to the slow i2c bus speed. So it will speed up the boot process if + you can avoid loading the fw as long as the video device isn't used. */ static int cx25840_init(struct v4l2_subdev *sd, u32 val) { struct cx25840_state *state = to_state(sd); -- cgit v1.1