From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/irda/ma600-sir.c | 264 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 264 insertions(+) create mode 100644 drivers/net/irda/ma600-sir.c (limited to 'drivers/net/irda/ma600-sir.c') diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c new file mode 100644 index 0000000..ebed168 --- /dev/null +++ b/drivers/net/irda/ma600-sir.c @@ -0,0 +1,264 @@ +/********************************************************************* + * + * Filename: ma600.c + * Version: 0.1 + * Description: Implementation of the MA600 dongle + * Status: Experimental. + * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95 + * Created at: Sat Jun 10 20:02:35 2000 + * Modified at: Sat Aug 16 09:34:13 2003 + * Modified by: Martin Diehl (modified for new sir_dev) + * + * Note: very thanks to Mr. Maru Wang for providing + * information on the MA600 dongle + * + * Copyright (c) 2000 Leung, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ********************************************************************/ + +#include +#include +#include +#include + +#include + +#include "sir-dev.h" + +static int ma600_open(struct sir_dev *); +static int ma600_close(struct sir_dev *); +static int ma600_change_speed(struct sir_dev *, unsigned); +static int ma600_reset(struct sir_dev *); + +/* control byte for MA600 */ +#define MA600_9600 0x00 +#define MA600_19200 0x01 +#define MA600_38400 0x02 +#define MA600_57600 0x03 +#define MA600_115200 0x04 +#define MA600_DEV_ID1 0x05 +#define MA600_DEV_ID2 0x06 +#define MA600_2400 0x08 + +static struct dongle_driver ma600 = { + .owner = THIS_MODULE, + .driver_name = "MA600", + .type = IRDA_MA600_DONGLE, + .open = ma600_open, + .close = ma600_close, + .reset = ma600_reset, + .set_speed = ma600_change_speed, +}; + + +static int __init ma600_sir_init(void) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + return irda_register_dongle(&ma600); +} + +static void __exit ma600_sir_cleanup(void) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + irda_unregister_dongle(&ma600); +} + +/* + Power on: + (0) Clear RTS and DTR for 1 second + (1) Set RTS and DTR for 1 second + (2) 9600 bps now + Note: assume RTS, DTR are clear before +*/ +static int ma600_open(struct sir_dev *dev) +{ + struct qos_info *qos = &dev->qos; + + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + /* Explicitly set the speeds we can accept */ + qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400 + |IR_57600|IR_115200; + /* Hm, 0x01 means 10ms - for >= 1ms we would need 0x07 */ + qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */ + irda_qos_bits_to_value(qos); + + /* irda thread waits 50 msec for power settling */ + + return 0; +} + +static int ma600_close(struct sir_dev *dev) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + /* Power off dongle */ + sirdev_set_dtr_rts(dev, FALSE, FALSE); + + return 0; +} + +static __u8 get_control_byte(__u32 speed) +{ + __u8 byte; + + switch (speed) { + default: + case 115200: + byte = MA600_115200; + break; + case 57600: + byte = MA600_57600; + break; + case 38400: + byte = MA600_38400; + break; + case 19200: + byte = MA600_19200; + break; + case 9600: + byte = MA600_9600; + break; + case 2400: + byte = MA600_2400; + break; + } + + return byte; +} + +/* + * Function ma600_change_speed (dev, speed) + * + * Set the speed for the MA600 type dongle. + * + * The dongle has already been reset to a known state (dongle default) + * We cycle through speeds by pulsing RTS low and then high. + */ + +/* + * Function ma600_change_speed (dev, speed) + * + * Set the speed for the MA600 type dongle. + * + * Algorithm + * 1. Reset (already done by irda thread state machine) + * 2. clear RTS, set DTR and wait for 1ms + * 3. send Control Byte to the MA600 through TXD to set new baud rate + * wait until the stop bit of Control Byte is sent (for 9600 baud rate, + * it takes about 10 msec) + * 4. set RTS, set DTR (return to NORMAL Operation) + * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here + * after + */ + +/* total delays are only about 20ms - let's just sleep for now to + * avoid the state machine complexity before we get things working + */ + +static int ma600_change_speed(struct sir_dev *dev, unsigned speed) +{ + u8 byte; + + IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__, + speed, dev->speed); + + /* dongle already reset, dongle and port at default speed (9600) */ + + /* Set RTS low for 1 ms */ + sirdev_set_dtr_rts(dev, TRUE, FALSE); + mdelay(1); + + /* Write control byte */ + byte = get_control_byte(speed); + sirdev_raw_write(dev, &byte, sizeof(byte)); + + /* Wait at least 10ms: fake wait_until_sent - 10 bits at 9600 baud*/ + msleep(15); /* old ma600 uses 15ms */ + +#if 1 + /* read-back of the control byte. ma600 is the first dongle driver + * which uses this so there might be some unidentified issues. + * Disable this in case of problems with readback. + */ + + sirdev_raw_read(dev, &byte, sizeof(byte)); + if (byte != get_control_byte(speed)) { + IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n", + __FUNCTION__, (unsigned) byte, + (unsigned) get_control_byte(speed)); + return -1; + } + else + IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__); +#endif + + /* Set DTR, Set RTS */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + + /* Wait at least 10ms */ + msleep(10); + + /* dongle is now switched to the new speed */ + dev->speed = speed; + + return 0; +} + +/* + * Function ma600_reset (dev) + * + * This function resets the ma600 dongle. + * + * Algorithm: + * 0. DTR=0, RTS=1 and wait 10 ms + * 1. DTR=1, RTS=1 and wait 10 ms + * 2. 9600 bps now + */ + +/* total delays are only about 20ms - let's just sleep for now to + * avoid the state machine complexity before we get things working + */ + +int ma600_reset(struct sir_dev *dev) +{ + IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + + /* Reset the dongle : set DTR low for 10 ms */ + sirdev_set_dtr_rts(dev, FALSE, TRUE); + msleep(10); + + /* Go back to normal mode */ + sirdev_set_dtr_rts(dev, TRUE, TRUE); + msleep(10); + + dev->speed = 9600; /* That's the dongle-default */ + + return 0; +} + +MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95"); +MODULE_DESCRIPTION("MA600 dongle driver version 0.1"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */ + +module_init(ma600_sir_init); +module_exit(ma600_sir_cleanup); + -- cgit v1.1