From 6f475c0133eb91c7df3b056843dc33d2824368a2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 28 Oct 2005 16:39:33 +0100 Subject: [ARM] 2897/2: PXA2xx IRDA support Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre Acked-by: Jean Tourrilhes Signed-off-by: Russell King --- drivers/net/irda/Kconfig | 10 + drivers/net/irda/Makefile | 1 + drivers/net/irda/pxaficp_ir.c | 871 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 882 insertions(+) create mode 100644 drivers/net/irda/pxaficp_ir.c (limited to 'drivers/net/irda') diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index ca59140..d54156f 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -400,5 +400,15 @@ config VIA_FIR To compile it as a module, choose M here: the module will be called via-ircc. +config PXA_FICP + tristate "Intel PXA2xx Internal FICP" + depends on ARCH_PXA && IRDA + help + Say Y or M here if you want to build support for the PXA2xx + built-in IRDA interface which can support both SIR and FIR. + This driver relies on platform specific helper routines so + available capabilities may vary from one PXA2xx target to + another. + endmenu diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index 29a8bd8..e7a8b7f 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VIA_FIR) += via-ircc.o +obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o # Old dongle drivers for old SIR drivers obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c new file mode 100644 index 0000000..aef80f5 --- /dev/null +++ b/drivers/net/irda/pxaficp_ir.c @@ -0,0 +1,871 @@ +/* + * linux/drivers/net/irda/pxaficp_ir.c + * + * Based on sa1100_ir.c by Russell King + * + * Changes copyright (C) 2003-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MACH_MAINSTONE +#include +#endif + +#define IrSR_RXPL_NEG_IS_ZERO (1<<4) +#define IrSR_RXPL_POS_IS_ZERO 0x0 +#define IrSR_TXPL_NEG_IS_ZERO (1<<3) +#define IrSR_TXPL_POS_IS_ZERO 0x0 +#define IrSR_XMODE_PULSE_1_6 (1<<2) +#define IrSR_XMODE_PULSE_3_16 0x0 +#define IrSR_RCVEIR_IR_MODE (1<<1) +#define IrSR_RCVEIR_UART_MODE 0x0 +#define IrSR_XMITIR_IR_MODE (1<<0) +#define IrSR_XMITIR_UART_MODE 0x0 + +#define IrSR_IR_RECEIVE_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) + +#define IrSR_IR_TRANSMIT_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) + +struct pxa_irda { + int speed; + int newspeed; + unsigned long last_oscr; + + unsigned char *dma_rx_buff; + unsigned char *dma_tx_buff; + dma_addr_t dma_rx_buff_phy; + dma_addr_t dma_tx_buff_phy; + unsigned int dma_tx_buff_len; + int txdma; + int rxdma; + + struct net_device_stats stats; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct device *dev; + struct pxaficp_platform_data *pdata; +}; + + +#define IS_FIR(si) ((si)->speed >= 4000000) +#define IRDA_FRAME_SIZE_LIMIT 2047 + +inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si) +{ + DCSR(si->rxdma) = DCSR_NODESC; + DSADR(si->rxdma) = __PREG(ICDR); + DTADR(si->rxdma) = si->dma_rx_buff_phy; + DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT; + DCSR(si->rxdma) |= DCSR_RUN; +} + +inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si) +{ + DCSR(si->txdma) = DCSR_NODESC; + DSADR(si->txdma) = si->dma_tx_buff_phy; + DTADR(si->txdma) = __PREG(ICDR); + DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len; + DCSR(si->txdma) |= DCSR_RUN; +} + +/* + * Set the IrDA communications speed. + */ +static int pxa_irda_set_speed(struct pxa_irda *si, int speed) +{ + unsigned long flags; + unsigned int divisor; + + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + + /* refer to PXA250/210 Developer's Manual 10-7 */ + /* BaudRate = 14.7456 MHz / (16*Divisor) */ + divisor = 14745600 / (16 * speed); + + local_irq_save(flags); + + if (IS_FIR(si)) { + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + pxa_set_cken(CKEN13_FICP, 0); + + /* set board transceiver to SIR mode */ + si->pdata->transceiver_mode(si->dev, IR_SIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_STRXD_MD); + pxa_gpio_mode(GPIO47_STTXD_MD); + + /* enable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 1); + } + + /* disable STUART first */ + STIER = 0; + + /* access DLL & DLH */ + STLCR |= LCR_DLAB; + STDLL = divisor & 0xff; + STDLH = divisor >> 8; + STLCR &= ~LCR_DLAB; + + si->speed = speed; + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + + local_irq_restore(flags); + break; + + case 4000000: + local_irq_save(flags); + + /* disable STUART */ + STIER = 0; + STISR = 0; + pxa_set_cken(CKEN5_STUART, 0); + + /* disable FICP first */ + ICCR0 = 0; + + /* set board transceiver to FIR mode */ + si->pdata->transceiver_mode(si->dev, IR_FIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_ICPRXD_MD); + pxa_gpio_mode(GPIO47_ICPTXD_MD); + + /* enable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 1); + + si->speed = speed; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + local_irq_restore(flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* SIR interrupt service routine. */ +static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int iir, lsr, data; + + iir = STIIR; + + switch (iir & 0x0F) { + case 0x06: /* Receiver Line Status */ + lsr = STLSR; + while (lsr & LSR_FIFOE) { + data = STRBR; + if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) { + printk(KERN_DEBUG "pxa_ir: sir receiving error\n"); + si->stats.rx_errors++; + if (lsr & LSR_FE) + si->stats.rx_frame_errors++; + if (lsr & LSR_OE) + si->stats.rx_fifo_errors++; + } else { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, data); + } + lsr = STLSR; + } + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x04: /* Received Data Available */ + /* forth through */ + + case 0x0C: /* Character Timeout Indication */ + do { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR); + } while (STLSR & LSR_DR); + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x02: /* Transmit FIFO Data Request */ + while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) { + STTHR = *si->tx_buff.data++; + si->tx_buff.len -= 1; + } + + if (si->tx_buff.len == 0) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->tx_buff.data - + si->tx_buff.head; + + /* We need to ensure that the transmitter has finished. */ + while ((STLSR & LSR_TEMT) == 0) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * Ok, we've finished transmitting. Now enable + * the receiver. Sometimes we get a receive IRQ + * immediately after a transmit... + */ + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + /* enable IR Receiver, disable IR Transmitter */ + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + /* enable STUART and receive interrupts */ + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + } + /* I'm hungry! */ + netif_wake_queue(dev); + } + break; + } + + return IRQ_HANDLED; +} + +/* FIR Receive DMA interrupt handler */ +static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs) +{ + int dcsr = DCSR(channel); + + DCSR(channel) = dcsr & ~DCSR_RUN; + + printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr); +} + +/* FIR Transmit DMA interrupt handler */ +static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs) +{ + struct net_device *dev = data; + struct pxa_irda *si = netdev_priv(dev); + int dcsr; + + dcsr = DCSR(channel); + DCSR(channel) = dcsr & ~DCSR_RUN; + + if (dcsr & DCSR_ENDINTR) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->dma_tx_buff_len; + } else { + si->stats.tx_errors++; + } + + while (ICSR1 & ICSR1_TBY) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * HACK: It looks like the TBY bit is dropped too soon. + * Without this delay things break. + */ + udelay(120); + + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + } + netif_wake_queue(dev); +} + +/* EIF(Error in FIFO/End in Frame) handler for FIR */ +static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev) +{ + unsigned int len, stat, data; + + /* Get the current data position. */ + len = DTADR(si->rxdma) - si->dma_rx_buff_phy; + + do { + /* Read Status, and then Data. */ + stat = ICSR1; + rmb(); + data = ICDR; + + if (stat & (ICSR1_CRE | ICSR1_ROR)) { + si->stats.rx_errors++; + if (stat & ICSR1_CRE) { + printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n"); + si->stats.rx_crc_errors++; + } + if (stat & ICSR1_ROR) { + printk(KERN_DEBUG "pxa_ir: fir receive overrun\n"); + si->stats.rx_frame_errors++; + } + } else { + si->dma_rx_buff[len++] = data; + } + /* If we hit the end of frame, there's no point in continuing. */ + if (stat & ICSR1_EOF) + break; + } while (ICSR0 & ICSR0_EIF); + + if (stat & ICSR1_EOF) { + /* end of frame. */ + struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n"); + si->stats.rx_dropped++; + return; + } + + /* Align IP header to 20 bytes */ + skb_reserve(skb, 1); + memcpy(skb->data, si->dma_rx_buff, len); + skb_put(skb, len); + + /* Feed it to IrLAP */ + skb->dev = dev; + skb->mac.raw = skb->data; + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + + si->stats.rx_packets++; + si->stats.rx_bytes += len; + + dev->last_rx = jiffies; + } +} + +/* FIR interrupt handler */ +static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int icsr0; + + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + si->last_oscr = OSCR; + icsr0 = ICSR0; + + if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) { + if (icsr0 & ICSR0_FRE) { + printk(KERN_DEBUG "pxa_ir: fir receive frame error\n"); + si->stats.rx_frame_errors++; + } else { + printk(KERN_DEBUG "pxa_ir: fir receive abort\n"); + si->stats.rx_errors++; + } + ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB); + } + + if (icsr0 & ICSR0_EIF) { + /* An error in FIFO occured, or there is a end of frame */ + pxa_irda_fir_irq_eif(si, dev); + } + + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + return IRQ_HANDLED; +} + +/* hard_xmit interface of irda device */ +static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int speed = irda_get_next_speed(skb); + + /* + * Does this packet contain a request to change the interface + * speed? If so, remember it until we complete the transmission + * of this frame. + */ + if (speed != si->speed && speed != -1) + si->newspeed = speed; + + /* + * If this is an empty frame, we can bypass a lot. + */ + if (skb->len == 0) { + if (si->newspeed) { + si->newspeed = 0; + pxa_irda_set_speed(si, speed); + } + dev_kfree_skb(skb); + return 0; + } + + netif_stop_queue(dev); + + if (!IS_FIR(si)) { + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize); + + /* Disable STUART interrupts and switch to transmit mode. */ + STIER = 0; + STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6; + + /* enable STUART and transmit interrupts */ + STIER = IER_UUE | IER_TIE; + } else { + unsigned long mtt = irda_get_mtt(skb); + + si->dma_tx_buff_len = skb->len; + memcpy(si->dma_tx_buff, skb->data, skb->len); + + if (mtt) + while ((unsigned)(OSCR - si->last_oscr)/4 < mtt) + cpu_relax(); + + /* stop RX DMA, disable FICP */ + DCSR(si->rxdma) &= ~DCSR_RUN; + ICCR0 = 0; + + pxa_irda_fir_dma_tx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_TXE; + } + + dev_kfree_skb(skb); + dev->trans_start = jiffies; + return 0; +} + +static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) +{ + struct if_irda_req *rq = (struct if_irda_req *)ifreq; + struct pxa_irda *si = netdev_priv(dev); + int ret; + + switch (cmd) { + case SIOCSBANDWIDTH: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + /* + * We are unable to set the speed if the + * device is not running. + */ + if (netif_running(dev)) { + ret = pxa_irda_set_speed(si, + rq->ifr_baudrate); + } else { + printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n"); + ret = 0; + } + } + break; + + case SIOCSMEDIABUSY: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + irda_device_set_media_busy(dev, TRUE); + ret = 0; + } + break; + + case SIOCGRECEIVING: + ret = 0; + rq->ifr_receiving = IS_FIR(si) ? 0 + : si->rx_buff.state != OUTSIDE_FRAME; + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static struct net_device_stats *pxa_irda_stats(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + return &si->stats; +} + +static void pxa_irda_startup(struct pxa_irda *si) +{ + /* Disable STUART interrupts */ + STIER = 0; + /* enable STUART interrupt to the processor */ + STMCR = MCR_OUT2; + /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */ + STLCR = LCR_WLS0 | LCR_WLS1; + /* enable FIFO, we use FIFO to improve performance */ + STFCR = FCR_TRFIFOE | FCR_ITL_32; + + /* disable FICP */ + ICCR0 = 0; + /* configure FICP ICCR2 */ + ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; + + /* configure DMAC */ + DRCMR17 = si->rxdma | DRCMR_MAPVLD; + DRCMR18 = si->txdma | DRCMR_MAPVLD; + + /* force SIR reinitialization */ + si->speed = 4000000; + pxa_irda_set_speed(si, 9600); + + printk(KERN_DEBUG "pxa_ir: irda startup\n"); +} + +static void pxa_irda_shutdown(struct pxa_irda *si) +{ + unsigned long flags; + + local_irq_save(flags); + + /* disable STUART and interrupt */ + STIER = 0; + /* disable STUART SIR mode */ + STISR = 0; + /* disable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 0); + + /* disable DMA */ + DCSR(si->txdma) &= ~DCSR_RUN; + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + /* disable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 0); + + DRCMR17 = 0; + DRCMR18 = 0; + + local_irq_restore(flags); + + /* power off board transceiver */ + si->pdata->transceiver_mode(si->dev, IR_OFF); + + printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); +} + +static int pxa_irda_start(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int err; + + si->speed = 9600; + + err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev); + if (err) + goto err_irq1; + + err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev); + if (err) + goto err_irq2; + + /* + * The interrupt must remain disabled for now. + */ + disable_irq(IRQ_STUART); + disable_irq(IRQ_ICP); + + err = -EBUSY; + si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev); + if (si->rxdma < 0) + goto err_rx_dma; + + si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev); + if (si->txdma < 0) + goto err_tx_dma; + + err = -ENOMEM; + si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_rx_buff_phy, GFP_KERNEL ); + if (!si->dma_rx_buff) + goto err_dma_rx_buff; + + si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_tx_buff_phy, GFP_KERNEL ); + if (!si->dma_tx_buff) + goto err_dma_tx_buff; + + /* Setup the serial port for the initial speed. */ + pxa_irda_startup(si); + + /* + * Open a new IrLAP layer instance. + */ + si->irlap = irlap_open(dev, &si->qos, "pxa"); + err = -ENOMEM; + if (!si->irlap) + goto err_irlap; + + /* + * Now enable the interrupt and start the queue + */ + enable_irq(IRQ_STUART); + enable_irq(IRQ_ICP); + netif_start_queue(dev); + + printk(KERN_DEBUG "pxa_ir: irda driver opened\n"); + + return 0; + +err_irlap: + pxa_irda_shutdown(si); + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); +err_dma_tx_buff: + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); +err_dma_rx_buff: + pxa_free_dma(si->txdma); +err_tx_dma: + pxa_free_dma(si->rxdma); +err_rx_dma: + free_irq(IRQ_ICP, dev); +err_irq2: + free_irq(IRQ_STUART, dev); +err_irq1: + + return err; +} + +static int pxa_irda_stop(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + + netif_stop_queue(dev); + + pxa_irda_shutdown(si); + + /* Stop IrLAP */ + if (si->irlap) { + irlap_close(si->irlap); + si->irlap = NULL; + } + + free_irq(IRQ_STUART, dev); + free_irq(IRQ_ICP, dev); + + pxa_free_dma(si->rxdma); + pxa_free_dma(si->txdma); + + if (si->dma_rx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); + if (si->dma_tx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); + + printk(KERN_DEBUG "pxa_ir: irda driver closed\n"); + return 0; +} + +static int pxa_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != SUSPEND_DISABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + netif_device_detach(dev); + pxa_irda_shutdown(si); + } + + return 0; +} + +static int pxa_irda_resume(struct device *_dev, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != RESUME_ENABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + pxa_irda_startup(si); + netif_device_attach(dev); + netif_wake_queue(dev); + } + + return 0; +} + + +static int pxa_irda_init_iobuf(iobuff_t *io, int size) +{ + io->head = kmalloc(size, GFP_KERNEL | GFP_DMA); + if (io->head != NULL) { + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; + } + return io->head ? 0 : -ENOMEM; +} + +static int pxa_irda_probe(struct device *_dev) +{ + struct platform_device *pdev = to_platform_device(_dev); + struct net_device *dev; + struct pxa_irda *si; + unsigned int baudrate_mask; + int err; + + if (!pdev->dev.platform_data) + return -ENODEV; + + err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_1; + + err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_2; + + dev = alloc_irdadev(sizeof(struct pxa_irda)); + if (!dev) + goto err_mem_3; + + si = netdev_priv(dev); + si->dev = &pdev->dev; + si->pdata = pdev->dev.platform_data; + + /* + * Initialise the SIR buffers + */ + err = pxa_irda_init_iobuf(&si->rx_buff, 14384); + if (err) + goto err_mem_4; + err = pxa_irda_init_iobuf(&si->tx_buff, 4000); + if (err) + goto err_mem_5; + + dev->hard_start_xmit = pxa_irda_hard_xmit; + dev->open = pxa_irda_start; + dev->stop = pxa_irda_stop; + dev->do_ioctl = pxa_irda_ioctl; + dev->get_stats = pxa_irda_stats; + + irda_init_max_qos_capabilies(&si->qos); + + baudrate_mask = 0; + if (si->pdata->transceiver_cap & IR_SIRMODE) + baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + if (si->pdata->transceiver_cap & IR_FIRMODE) + baudrate_mask |= IR_4000000 << 8; + + si->qos.baud_rate.bits &= baudrate_mask; + si->qos.min_turn_time.bits = 7; /* 1ms or more */ + + irda_qos_bits_to_value(&si->qos); + + err = register_netdev(dev); + + if (err == 0) + dev_set_drvdata(&pdev->dev, dev); + + if (err) { + kfree(si->tx_buff.head); +err_mem_5: + kfree(si->rx_buff.head); +err_mem_4: + free_netdev(dev); +err_mem_3: + release_mem_region(__PREG(FICP), 0x1c); +err_mem_2: + release_mem_region(__PREG(STUART), 0x24); + } +err_mem_1: + return err; +} + +static int pxa_irda_remove(struct device *_dev) +{ + struct net_device *dev = dev_get_drvdata(_dev); + + if (dev) { + struct pxa_irda *si = netdev_priv(dev); + unregister_netdev(dev); + kfree(si->tx_buff.head); + kfree(si->rx_buff.head); + free_netdev(dev); + } + + release_mem_region(__PREG(STUART), 0x24); + release_mem_region(__PREG(FICP), 0x1c); + + return 0; +} + +static struct device_driver pxa_ir_driver = { + .name = "pxa2xx-ir", + .bus = &platform_bus_type, + .probe = pxa_irda_probe, + .remove = pxa_irda_remove, + .suspend = pxa_irda_suspend, + .resume = pxa_irda_resume, +}; + +static int __init pxa_irda_init(void) +{ + return driver_register(&pxa_ir_driver); +} + +static void __exit pxa_irda_exit(void) +{ + driver_unregister(&pxa_ir_driver); +} + +module_init(pxa_irda_init); +module_exit(pxa_irda_exit); + +MODULE_LICENSE("GPL"); -- cgit v1.1 From 9480e307cd88ef09ec9294c7d97ebec18e6d2221 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 09:52:56 -0700 Subject: [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/net/irda/sa1100_ir.c | 8 ++++---- drivers/net/irda/smsc-ircc2.c | 12 ++++++------ 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net/irda') diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 8d34ac6..0688330 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -291,12 +291,12 @@ static void sa1100_irda_shutdown(struct sa1100_irda *si) /* * Suspend the IrDA interface. */ -static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +static int sa1100_irda_suspend(struct device *_dev, pm_message_t state) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != SUSPEND_DISABLE) + if (!dev) return 0; si = dev->priv; @@ -316,12 +316,12 @@ static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 leve /* * Resume the IrDA interface. */ -static int sa1100_irda_resume(struct device *_dev, u32 level) +static int sa1100_irda_resume(struct device *_dev) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != RESUME_ENABLE) + if (!dev) return 0; si = dev->priv; diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index dd89bda..bbac720 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -213,8 +213,8 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); /* Power Management */ -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level); -static int smsc_ircc_resume(struct device *dev, u32 level); +static int smsc_ircc_suspend(struct device *dev, pm_message_t state); +static int smsc_ircc_resume(struct device *dev); static struct device_driver smsc_ircc_driver = { .name = SMSC_IRCC2_DRIVER_NAME, @@ -1646,13 +1646,13 @@ static int smsc_ircc_net_close(struct net_device *dev) return 0; } -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) +static int smsc_ircc_suspend(struct device *dev, pm_message_t state) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); IRDA_MESSAGE("%s, Suspending\n", driver_name); - if (level == SUSPEND_DISABLE && !self->io.suspended) { + if (!self->io.suspended) { smsc_ircc_net_close(self->netdev); self->io.suspended = 1; } @@ -1660,11 +1660,11 @@ static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int smsc_ircc_resume(struct device *dev, u32 level) +static int smsc_ircc_resume(struct device *dev) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); - if (level == RESUME_ENABLE && self->io.suspended) { + if (self->io.suspended) { smsc_ircc_net_open(self->netdev); self->io.suspended = 0; -- cgit v1.1