From 8fe6536850ae49609704a263cbc7542133536922 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 15 Apr 2010 17:38:14 -0400 Subject: ath9k_hw: Move some RF ops to the private callbacks The PHY split is easier done in a few steps. First move the RF ops to the private ops and rename them accordingly. We split PHY stuff up first for the AR5008 and AR9002 families. There are some callbacks that AR9002 share with the AR5008 familiy so we set those first, if AR9002 has some different callbacks it will override them upon hardware init. Signed-off-by: Felix Fietkau Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 450 ++++++++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_phy.c (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c new file mode 100644 index 0000000..29b50ca --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -0,0 +1,450 @@ +/* + * Copyright (c) 2008-2010 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/** + * DOC: Programming Atheros 802.11n analog front end radios + * + * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express + * devices have either an external AR2133 analog front end radio for single + * band 2.4 GHz communication or an AR5133 analog front end radio for dual + * band 2.4 GHz / 5 GHz communication. + * + * All devices after the AR5416 and AR5418 family starting with the AR9280 + * have their analog front radios, MAC/BB and host PCIe/USB interface embedded + * into a single-chip and require less programming. + * + * The following single-chips exist with a respective embedded radio: + * + * AR9280 - 11n dual-band 2x2 MIMO for PCIe + * AR9281 - 11n single-band 1x2 MIMO for PCIe + * AR9285 - 11n single-band 1x1 for PCIe + * AR9287 - 11n single-band 2x2 MIMO for PCIe + * + * AR9220 - 11n dual-band 2x2 MIMO for PCI + * AR9223 - 11n single-band 2x2 MIMO for PCI + * + * AR9287 - 11n single-band 1x1 MIMO for USB + */ + +#include "hw.h" +#include "ar9002_phy.h" + +/** + * ar9002_hw_set_channel - set channel on single-chip device + * @ah: atheros hardware structure + * @chan: + * + * This is the function to change channel on single-chip devices, that is + * all devices after ar9280. + * + * This function takes the channel value in MHz and sets + * hardware channel value. Assumes writes have been enabled to analog bus. + * + * Actual Expression, + * + * For 2GHz channel, + * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) + * (freq_ref = 40MHz) + * + * For 5GHz channel, + * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) + * (freq_ref = 40MHz/(24>>amodeRefSel)) + */ +static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) +{ + u16 bMode, fracMode, aModeRefSel = 0; + u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; + struct chan_centers centers; + u32 refDivA = 24; + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); + reg32 &= 0xc0000000; + + if (freq < 4800) { /* 2 GHz, fractional mode */ + u32 txctl; + int regWrites = 0; + + bMode = 1; + fracMode = 1; + aModeRefSel = 0; + channelSel = (freq * 0x10000) / 15; + + if (AR_SREV_9287_11_OR_LATER(ah)) { + if (freq == 2484) { + /* Enable channel spreading for channel 14 */ + REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, + 1, regWrites); + } else { + REG_WRITE_ARRAY(&ah->iniCckfirNormal, + 1, regWrites); + } + } else { + txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); + if (freq == 2484) { + /* Enable channel spreading for channel 14 */ + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl | AR_PHY_CCK_TX_CTRL_JAPAN); + } else { + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); + } + } + } else { + bMode = 0; + fracMode = 0; + + switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) { + case 0: + if ((freq % 20) == 0) + aModeRefSel = 3; + else if ((freq % 10) == 0) + aModeRefSel = 2; + if (aModeRefSel) + break; + case 1: + default: + aModeRefSel = 0; + /* + * Enable 2G (fractional) mode for channels + * which are 5MHz spaced. + */ + fracMode = 1; + refDivA = 1; + channelSel = (freq * 0x8000) / 15; + + /* RefDivA setting */ + REG_RMW_FIELD(ah, AR_AN_SYNTH9, + AR_AN_SYNTH9_REFDIVA, refDivA); + + } + + if (!fracMode) { + ndiv = (freq * (refDivA >> aModeRefSel)) / 60; + channelSel = ndiv & 0x1ff; + channelFrac = (ndiv & 0xfffffe00) * 2; + channelSel = (channelSel << 17) | channelFrac; + } + } + + reg32 = reg32 | + (bMode << 29) | + (fracMode << 28) | (aModeRefSel << 26) | (channelSel); + + REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32); + + ah->curchan = chan; + ah->curchan_rad_index = -1; + + return 0; +} + +/** + * ar9002_hw_spur_mitigate - convert baseband spur frequency + * @ah: atheros hardware structure + * @chan: + * + * For single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +static void ar9002_hw_spur_mitigate(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int freq; + int bin, cur_bin; + int bb_spur_off, spur_subchannel_sd; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int upper, lower, cur_vit_mask; + int tmp, newVal; + int i; + int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + int inc[4] = { 0, 100, 0, 0 }; + struct chan_centers centers; + + int8_t mask_m[123]; + int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + memset(&mask_m, 0, sizeof(int8_t) * 123); + memset(&mask_p, 0, sizeof(int8_t) * 123); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + ah->config.spurmode = SPUR_ENABLE_EEPROM; + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + + if (is2GHz) + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; + else + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; + + if (AR_NO_SPUR == cur_bb_spur) + break; + cur_bb_spur = cur_bb_spur - freq; + + if (IS_CHAN_HT40(chan)) { + if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { + bb_spur = cur_bb_spur; + break; + } + } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + return; + } else { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + } + + bin = bb_spur * 320; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + + newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); + + newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); + + if (IS_CHAN_HT40(chan)) { + if (bb_spur < 0) { + spur_subchannel_sd = 1; + bb_spur_off = bb_spur + 10; + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur - 10; + } + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur; + } + + if (IS_CHAN_HT40(chan)) + spur_delta_phase = + ((bb_spur * 262144) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + else + spur_delta_phase = + ((bb_spur * 524288) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; + spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; + + newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, newVal); + + newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; + REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); + + cur_bin = -6000; + upper = bin + 100; + lower = bin - 100; + + for (i = 0; i < 4; i++) { + int pilot_mask = 0; + int chan_mask = 0; + int bp = 0; + for (bp = 0; bp < 30; bp++) { + if ((cur_bin > lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); +} + +static void ar9002_olc_init(struct ath_hw *ah) +{ + u32 i; + + if (!OLC_FOR_AR9280_20_LATER) + return; + + if (OLC_FOR_AR9287_10_LATER) { + REG_SET_BIT(ah, AR_PHY_TX_PWRCTRL9, + AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL); + ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TXPC0, + AR9287_AN_TXPC0_TXPCMODE, + AR9287_AN_TXPC0_TXPCMODE_S, + AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE); + udelay(100); + } else { + for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++) + ah->originalGain[i] = + MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4), + AR_PHY_TX_GAIN); + ah->PDADCdelta = 0; + } +} + +void ar9002_hw_attach_phy_ops(struct ath_hw *ah) +{ + struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); + + priv_ops->set_rf_regs = NULL; + priv_ops->rf_alloc_ext_banks = NULL; + priv_ops->rf_free_ext_banks = NULL; + priv_ops->rf_set_freq = ar9002_hw_set_channel; + priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; + priv_ops->olc_init = ar9002_olc_init; +} -- cgit v1.1 From 647739645bea4a5628f9e4eaf8022dcc5875c535 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 15 Apr 2010 17:38:17 -0400 Subject: ath9k_hw: add a private callback for PLL control computation The PLL control computation used to program the AR_RTC_PLL_CONTROL register varies between our harware so just add a private callback for it. AR9003 will use its own callback. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 31 +++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 29b50ca..87541a8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -437,6 +437,36 @@ static void ar9002_olc_init(struct ath_hw *ah) } } +static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + u32 pll; + + pll = SM(0x5, AR_RTC_9160_PLL_REFDIV); + + if (chan && IS_CHAN_HALF_RATE(chan)) + pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL); + else if (chan && IS_CHAN_QUARTER_RATE(chan)) + pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL); + + if (chan && IS_CHAN_5GHZ(chan)) { + pll |= SM(0x28, AR_RTC_9160_PLL_DIV); + + + if (AR_SREV_9280_20(ah)) { + if (((chan->channel % 20) == 0) + || ((chan->channel % 10) == 0)) + pll = 0x2850; + else + pll = 0x142c; + } + } else { + pll |= SM(0x2c, AR_RTC_9160_PLL_DIV); + } + + return pll; +} + void ar9002_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -447,4 +477,5 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) priv_ops->rf_set_freq = ar9002_hw_set_channel; priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; priv_ops->olc_init = ar9002_olc_init; + priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; } -- cgit v1.1 From 7152451aa12558ab032f319a119ceb928396b905 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 15 Apr 2010 17:38:32 -0400 Subject: ath9k_hw: add common channel select helpers for ar900[23] Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 87541a8..1f8ac0a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -83,7 +83,7 @@ static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) bMode = 1; fracMode = 1; aModeRefSel = 0; - channelSel = (freq * 0x10000) / 15; + channelSel = CHANSEL_2G(freq); if (AR_SREV_9287_11_OR_LATER(ah)) { if (freq == 2484) { @@ -126,7 +126,7 @@ static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) */ fracMode = 1; refDivA = 1; - channelSel = (freq * 0x8000) / 15; + channelSel = CHANSEL_5G(freq); /* RefDivA setting */ REG_RMW_FIELD(ah, AR_AN_SYNTH9, -- cgit v1.1 From 641d99217f507024720d21f0a76a8075824fcc46 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 15 Apr 2010 17:38:49 -0400 Subject: ath9k_hw: Split out the function for reading the noise floor Signed-off-by: Felix Fietkau Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 53 +++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 1f8ac0a..a0a2f58 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -467,6 +467,58 @@ static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, return pll; } +static void ar9002_hw_do_getnf(struct ath_hw *ah, + int16_t nfarray[NUM_NF_READINGS]) +{ + struct ath_common *common = ath9k_hw_common(ah); + int16_t nf; + + nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR); + + if (nf & 0x100) + nf = 0 - ((nf ^ 0x1ff) + 1); + ath_print(common, ATH_DBG_CALIBRATE, + "NF calibrated [ctl] [chain 0] is %d\n", nf); + + if (AR_SREV_9271(ah) && (nf >= -114)) + nf = -116; + + nfarray[0] = nf; + + if (!AR_SREV_9285(ah) && !AR_SREV_9271(ah)) { + nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), + AR9280_PHY_CH1_MINCCA_PWR); + + if (nf & 0x100) + nf = 0 - ((nf ^ 0x1ff) + 1); + ath_print(common, ATH_DBG_CALIBRATE, + "NF calibrated [ctl] [chain 1] is %d\n", nf); + nfarray[1] = nf; + } + + nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR9280_PHY_EXT_MINCCA_PWR); + if (nf & 0x100) + nf = 0 - ((nf ^ 0x1ff) + 1); + ath_print(common, ATH_DBG_CALIBRATE, + "NF calibrated [ext] [chain 0] is %d\n", nf); + + if (AR_SREV_9271(ah) && (nf >= -114)) + nf = -116; + + nfarray[3] = nf; + + if (!AR_SREV_9285(ah) && !AR_SREV_9271(ah)) { + nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), + AR9280_PHY_CH1_EXT_MINCCA_PWR); + + if (nf & 0x100) + nf = 0 - ((nf ^ 0x1ff) + 1); + ath_print(common, ATH_DBG_CALIBRATE, + "NF calibrated [ext] [chain 1] is %d\n", nf); + nfarray[4] = nf; + } +} + void ar9002_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -478,4 +530,5 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; priv_ops->olc_init = ar9002_olc_init; priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; + priv_ops->do_getnf = ar9002_hw_do_getnf; } -- cgit v1.1 From 7d0d0df0eca695c83a08dc386824a9d1d7c526a4 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 16 Apr 2010 11:53:57 +0530 Subject: ath9k_hw: Use buffered register writes This patch adds macros at certain places which could be optimized for multiple register writes. The performance of ath9k_htc improves considerably, especially reducing the latency involved in a scan run. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index a0a2f58..18cfe1a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -236,6 +236,8 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah, tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + ENABLE_REGWRITE_BUFFER(ah); + newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | @@ -411,6 +413,9 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah, | (mask_p[47] << 2) | (mask_p[46] << 0); REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); + + REGWRITE_BUFFER_FLUSH(ah); + DISABLE_REGWRITE_BUFFER(ah); } static void ar9002_olc_init(struct ath_hw *ah) -- cgit v1.1 From 6b42e8d03bef975085c0397806d00fbd1df67eb8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:35 -0400 Subject: ath9k_hw: fix fast clock handling for 5GHz channels Combine multiple checks that were supposed to check for the same conditions, but didn't. Always enable fast PLL clock on AR9280 2.0 Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 18cfe1a..ed314e8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -455,16 +455,12 @@ static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL); if (chan && IS_CHAN_5GHZ(chan)) { - pll |= SM(0x28, AR_RTC_9160_PLL_DIV); - - - if (AR_SREV_9280_20(ah)) { - if (((chan->channel % 20) == 0) - || ((chan->channel % 10) == 0)) - pll = 0x2850; - else - pll = 0x142c; - } + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) + pll = 0x142c; + else if (AR_SREV_9280_20(ah)) + pll = 0x2850; + else + pll |= SM(0x28, AR_RTC_9160_PLL_DIV); } else { pll |= SM(0x2c, AR_RTC_9160_PLL_DIV); } -- cgit v1.1