From 47c51431fcc5fce3108e8e549cc9d243acd462ed Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Sun, 12 Feb 2006 11:53:04 -0600 Subject: [PATCH] trivial: fix spelling errors in Kconfigs This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason Signed-off-by: John W. Linville --- drivers/net/Kconfig | 18 +++++++++--------- drivers/net/arcnet/Kconfig | 4 ++-- drivers/net/irda/Kconfig | 4 ++-- drivers/net/wan/Kconfig | 2 +- drivers/net/wireless/Kconfig | 6 +++--- 5 files changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 47c72a6..2610ced 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -66,7 +66,7 @@ config BONDING 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. The driver supports multiple bonding modes to allow for both high - perfomance and high availability operation. + performance and high availability operation. Refer to for more information. @@ -698,8 +698,8 @@ config VORTEX depends on NET_VENDOR_3COM && (PCI || EISA) select MII ---help--- - This option enables driver support for a large number of 10mbps and - 10/100mbps EISA, PCI and PCMCIA 3Com network cards: + This option enables driver support for a large number of 10Mbps and + 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI "Boomerang" (EtherLink XL 3c900 or 3c905) PCI @@ -1021,7 +1021,7 @@ config EEXPRESS_PRO depends on NET_ISA ---help--- If you have a network (Ethernet) card of this type, say Y. This - driver supports intel i82595{FX,TX} based boards. Note however + driver supports Intel i82595{FX,TX} based boards. Note however that the EtherExpress PRO/100 Ethernet card has its own separate driver. Please read the Ethernet-HOWTO, available from . @@ -1207,7 +1207,7 @@ config IBM_EMAC_RX_SKB_HEADROOM help Additional receive skb headroom. Note, that driver will always reserve at least 2 bytes to make IP header - aligned, so usualy there is no need to add any additional + aligned, so usually there is no need to add any additional headroom. If unsure, set to 0. @@ -1933,7 +1933,7 @@ config MYRI_SBUS will be called myri_sbus. This is recommended. config NS83820 - tristate "National Semiconduct DP83820 support" + tristate "National Semiconductor DP83820 support" depends on PCI help This is a driver for the National Semiconductor DP83820 series @@ -2514,7 +2514,7 @@ config PPP_FILTER Say Y here if you want to be able to filter the packets passing over PPP interfaces. This allows you to control which packets count as activity (i.e. which packets will reset the idle timer or bring up - a demand-dialled link) and which packets are to be dropped entirely. + a demand-dialed link) and which packets are to be dropped entirely. You need to say Y here if you wish to use the pass-filter and active-filter options to pppd. @@ -2702,8 +2702,8 @@ config SHAPER for more information. An alternative to this traffic shaper is the experimental - Class-Based Queueing (CBQ) scheduling support which you get if you - say Y to "QoS and/or fair queueing" above. + Class-Based Queuing (CBQ) scheduling support which you get if you + say Y to "QoS and/or fair queuing" above. To compile this driver as a module, choose M here: the module will be called shaper. If unsure, say N. diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 948de25..7284cca 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -68,10 +68,10 @@ config ARCNET_CAP packet is stuffed with an extra 4 byte "cookie" which doesn't actually appear on the network. After transmit the driver will send back a packet with protocol byte 0 containing the status of the - transmition: + transmission: 0=no hardware acknowledge 1=excessive nak - 2=transmition accepted by the reciever hardware + 2=transmission accepted by the receiver hardware Received packets are also stuffed with the extra 4 bytes but it will be random data. diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 7a08134..c81fe1c 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -283,7 +283,7 @@ config USB_IRDA Say Y here if you want to build support for the USB IrDA FIR Dongle device driver. To compile it as a module, choose M here: the module will be called irda-usb. IrDA-USB support the various IrDA USB - dongles available and most of their pecularities. Those dongles + dongles available and most of their peculiarities. Those dongles plug in the USB port of your computer, are plug and play, and support SIR and FIR (4Mbps) speeds. On the other hand, those dongles tend to be less efficient than a FIR chipset. @@ -360,7 +360,7 @@ config ALI_FIR help Say Y here if you want to build support for the ALi M5123 FIR Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, - M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports + M1535, M1535D, M1535+, M1535D South Bridge. This driver supports SIR, MIR and FIR (4Mbps) speeds. To compile it as a module, choose M here: the module will be called diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 18c27e1..883cf7d 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -459,7 +459,7 @@ config WANPIPE_FR bool "WANPIPE Frame Relay support" depends on VENDOR_SANGOMA help - Connect a WANPIPE card to a Frame Relay network, or use Frame Felay + Connect a WANPIPE card to a Frame Relay network, or use Frame Relay API to develop custom applications. Contains the Ethernet Bridging over Frame Relay feature, where diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index f389467..5b0a19a 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -204,7 +204,7 @@ config IPW2200 In order to use this driver, you will need a firmware image for it. You can obtain the firmware from . See the above referenced README.ipw2200 - for information on where to install the firmare images. + for information on where to install the firmware images. You will also very likely need the Wireless Tools in order to configure your card: @@ -262,7 +262,7 @@ config AIRO PCI 802.11 wireless cards. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco - aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). This driver support both the standard Linux Wireless Extensions and Cisco proprietary API, so both the Linux Wireless Tools and the @@ -411,7 +411,7 @@ config AIRO_CS driver part of the Linux Pcmcia package. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco - aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 802.11b cards. -- cgit v1.1