From 1032fbfd792f2b384ac16a63993b8fae5eea9083 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Fri, 1 Apr 2011 14:43:33 +0200 Subject: mach-ux500: voltage domain regulators for DB8500 The DB8500 has ePOD:s (electronic power domains) which are possible to switch on/off to deactivate silicon blocks on the DB8500 SoC by cutting their power without retention. We model these as simple regulators with one bit on/off settings. Acked-by: Liam Girdwood Acked-by: Mark Brown Signed-off-by: Bengt Jonsson Signed-off-by: Sundar Iyer Signed-off-by: Jonas Aberg Signed-off-by: Virupax Sadashivpetimath Signed-off-by: Martin Persson Signed-off-by: Linus Walleij --- drivers/regulator/db8500-prcmu.c | 558 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 558 insertions(+) create mode 100644 drivers/regulator/db8500-prcmu.c (limited to 'drivers/regulator/db8500-prcmu.c') diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c new file mode 100644 index 0000000..1089a96 --- /dev/null +++ b/drivers/regulator/db8500-prcmu.c @@ -0,0 +1,558 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Authors: Sundar Iyer for ST-Ericsson + * Bengt Jonsson for ST-Ericsson + * + * Power domain regulators on DB8500 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * power state reference count + */ +static int power_state_active_cnt; /* will initialize to zero */ +static DEFINE_SPINLOCK(power_state_active_lock); + +static void power_state_active_enable(void) +{ + unsigned long flags; + + spin_lock_irqsave(&power_state_active_lock, flags); + power_state_active_cnt++; + spin_unlock_irqrestore(&power_state_active_lock, flags); +} + +static int power_state_active_disable(void) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&power_state_active_lock, flags); + if (power_state_active_cnt <= 0) { + pr_err("power state: unbalanced enable/disable calls\n"); + ret = -EINVAL; + goto out; + } + + power_state_active_cnt--; +out: + spin_unlock_irqrestore(&power_state_active_lock, flags); + return ret; +} + +/* + * Exported interface for CPUIdle only. This function is called when interrupts + * are turned off. Hence, no locking. + */ +int power_state_active_is_enabled(void) +{ + return (power_state_active_cnt > 0); +} + +/** + * struct db8500_regulator_info - db8500 regulator information + * @dev: device pointer + * @desc: regulator description + * @rdev: regulator device pointer + * @is_enabled: status of the regulator + * @epod_id: id for EPOD (power domain) + * @is_ramret: RAM retention switch for EPOD (power domain) + * @operating_point: operating point (only for vape, to be removed) + * + */ +struct db8500_regulator_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + bool is_enabled; + u16 epod_id; + bool is_ramret; + bool exclude_from_power_state; + unsigned int operating_point; +}; + +static int db8500_regulator_enable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n", + info->desc.name); + + info->is_enabled = true; + if (!info->exclude_from_power_state) + power_state_active_enable(); + + return 0; +} + +static int db8500_regulator_disable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret = 0; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n", + info->desc.name); + + info->is_enabled = false; + if (!info->exclude_from_power_state) + ret = power_state_active_disable(); + + return ret; +} + +static int db8500_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):" + " %i\n", info->desc.name, info->is_enabled); + + return info->is_enabled; +} + +/* db8500 regulator operations */ +static struct regulator_ops db8500_regulator_ops = { + .enable = db8500_regulator_enable, + .disable = db8500_regulator_disable, + .is_enabled = db8500_regulator_is_enabled, +}; + +/* + * EPOD control + */ +static bool epod_on[NUM_EPOD_ID]; +static bool epod_ramret[NUM_EPOD_ID]; + +static int enable_epod(u16 epod_id, bool ramret) +{ + int ret; + + if (ramret) { + if (!epod_on[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); + if (ret < 0) + return ret; + } + epod_ramret[epod_id] = true; + } else { + ret = prcmu_set_epod(epod_id, EPOD_STATE_ON); + if (ret < 0) + return ret; + epod_on[epod_id] = true; + } + + return 0; +} + +static int disable_epod(u16 epod_id, bool ramret) +{ + int ret; + + if (ramret) { + if (!epod_on[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); + if (ret < 0) + return ret; + } + epod_ramret[epod_id] = false; + } else { + if (epod_ramret[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); + if (ret < 0) + return ret; + } else { + ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); + if (ret < 0) + return ret; + } + epod_on[epod_id] = false; + } + + return 0; +} + +/* + * Regulator switch + */ +static int db8500_regulator_switch_enable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n", + info->desc.name); + + ret = enable_epod(info->epod_id, info->is_ramret); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "regulator-switch-%s-enable: prcmu call failed\n", + info->desc.name); + goto out; + } + + info->is_enabled = true; +out: + return ret; +} + +static int db8500_regulator_switch_disable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n", + info->desc.name); + + ret = disable_epod(info->epod_id, info->is_ramret); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "regulator_switch-%s-disable: prcmu call failed\n", + info->desc.name); + goto out; + } + + info->is_enabled = 0; +out: + return ret; +} + +static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), + "regulator-switch-%s-is_enabled (is_enabled): %i\n", + info->desc.name, info->is_enabled); + + return info->is_enabled; +} + +static struct regulator_ops db8500_regulator_switch_ops = { + .enable = db8500_regulator_switch_enable, + .disable = db8500_regulator_switch_disable, + .is_enabled = db8500_regulator_switch_is_enabled, +}; + +/* + * Regulator information + */ +static struct db8500_regulator_info + db8500_regulator_info[DB8500_NUM_REGULATORS] = { + [DB8500_REGULATOR_VAPE] = { + .desc = { + .name = "db8500-vape", + .id = DB8500_REGULATOR_VAPE, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VARM] = { + .desc = { + .name = "db8500-varm", + .id = DB8500_REGULATOR_VARM, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VMODEM] = { + .desc = { + .name = "db8500-vmodem", + .id = DB8500_REGULATOR_VMODEM, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VPLL] = { + .desc = { + .name = "db8500-vpll", + .id = DB8500_REGULATOR_VPLL, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VSMPS1] = { + .desc = { + .name = "db8500-vsmps1", + .id = DB8500_REGULATOR_VSMPS1, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VSMPS2] = { + .desc = { + .name = "db8500-vsmps2", + .id = DB8500_REGULATOR_VSMPS2, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .exclude_from_power_state = true, + }, + [DB8500_REGULATOR_VSMPS3] = { + .desc = { + .name = "db8500-vsmps3", + .id = DB8500_REGULATOR_VSMPS3, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VRF1] = { + .desc = { + .name = "db8500-vrf1", + .id = DB8500_REGULATOR_VRF1, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { + .desc = { + .name = "db8500-sva-mmdsp", + .id = DB8500_REGULATOR_SWITCH_SVAMMDSP, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAMMDSP, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { + .desc = { + .name = "db8500-sva-mmdsp-ret", + .id = DB8500_REGULATOR_SWITCH_SVAMMDSPRET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAMMDSP, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_SVAPIPE] = { + .desc = { + .name = "db8500-sva-pipe", + .id = DB8500_REGULATOR_SWITCH_SVAPIPE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAPIPE, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { + .desc = { + .name = "db8500-sia-mmdsp", + .id = DB8500_REGULATOR_SWITCH_SIAMMDSP, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAMMDSP, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { + .desc = { + .name = "db8500-sia-mmdsp-ret", + .id = DB8500_REGULATOR_SWITCH_SIAMMDSPRET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAMMDSP, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_SIAPIPE] = { + .desc = { + .name = "db8500-sia-pipe", + .id = DB8500_REGULATOR_SWITCH_SIAPIPE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAPIPE, + }, + [DB8500_REGULATOR_SWITCH_SGA] = { + .desc = { + .name = "db8500-sga", + .id = DB8500_REGULATOR_SWITCH_SGA, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SGA, + }, + [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { + .desc = { + .name = "db8500-b2r2-mcde", + .id = DB8500_REGULATOR_SWITCH_B2R2_MCDE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_B2R2_MCDE, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12] = { + .desc = { + .name = "db8500-esram12", + .id = DB8500_REGULATOR_SWITCH_ESRAM12, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM12, + .is_enabled = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { + .desc = { + .name = "db8500-esram12-ret", + .id = DB8500_REGULATOR_SWITCH_ESRAM12RET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM12, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34] = { + .desc = { + .name = "db8500-esram34", + .id = DB8500_REGULATOR_SWITCH_ESRAM34, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM34, + .is_enabled = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { + .desc = { + .name = "db8500-esram34-ret", + .id = DB8500_REGULATOR_SWITCH_ESRAM34RET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM34, + .is_ramret = true, + }, +}; + +static int __devinit db8500_regulator_probe(struct platform_device *pdev) +{ + struct regulator_init_data *db8500_init_data = mfd_get_data(pdev); + int i, err; + + /* register all regulators */ + for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { + struct db8500_regulator_info *info; + struct regulator_init_data *init_data = &db8500_init_data[i]; + + /* assign per-regulator data */ + info = &db8500_regulator_info[i]; + info->dev = &pdev->dev; + + /* register with the regulator framework */ + info->rdev = regulator_register(&info->desc, &pdev->dev, + init_data, info); + if (IS_ERR(info->rdev)) { + err = PTR_ERR(info->rdev); + dev_err(&pdev->dev, "failed to register %s: err %i\n", + info->desc.name, err); + + /* if failing, unregister all earlier regulators */ + i--; + while (i >= 0) { + info = &db8500_regulator_info[i]; + regulator_unregister(info->rdev); + i--; + } + return err; + } + + dev_dbg(rdev_get_dev(info->rdev), + "regulator-%s-probed\n", info->desc.name); + } + + return 0; +} + +static int __exit db8500_regulator_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { + struct db8500_regulator_info *info; + info = &db8500_regulator_info[i]; + + dev_vdbg(rdev_get_dev(info->rdev), + "regulator-%s-remove\n", info->desc.name); + + regulator_unregister(info->rdev); + } + + return 0; +} + +static struct platform_driver db8500_regulator_driver = { + .driver = { + .name = "db8500-prcmu-regulators", + .owner = THIS_MODULE, + }, + .probe = db8500_regulator_probe, + .remove = __exit_p(db8500_regulator_remove), +}; + +static int __init db8500_regulator_init(void) +{ + int ret; + + ret = platform_driver_register(&db8500_regulator_driver); + if (ret < 0) + return -ENODEV; + + return 0; +} + +static void __exit db8500_regulator_exit(void) +{ + platform_driver_unregister(&db8500_regulator_driver); +} + +arch_initcall(db8500_regulator_init); +module_exit(db8500_regulator_exit); + +MODULE_AUTHOR("STMicroelectronics/ST-Ericsson"); +MODULE_DESCRIPTION("DB8500 regulator driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1