From c6da2cfeb05178a11c6d062a06f8078150ee492f Mon Sep 17 00:00:00 2001
From: codeworkx <daniel.hillenbrand@codeworkx.de>
Date: Sat, 2 Jun 2012 13:09:29 +0200
Subject: samsung update 1

---
 drivers/rtc/class.c | 69 ++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 50 insertions(+), 19 deletions(-)

(limited to 'drivers/rtc/class.c')

diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 4194e59..b82a155 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -41,20 +41,41 @@ static void rtc_device_release(struct device *dev)
  * system's wall clock; restore it on resume().
  */
 
-static time_t		oldtime;
-static struct timespec	oldts;
+static struct timespec old_rtc, old_system, old_delta;
+
 
 static int rtc_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct rtc_device	*rtc = to_rtc_device(dev);
 	struct rtc_time		tm;
-
+	struct timespec		delta, delta_delta;
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
+	/* snapshot the current RTC and system time at suspend*/
 	rtc_read_time(rtc, &tm);
-	ktime_get_ts(&oldts);
-	rtc_tm_to_time(&tm, &oldtime);
+	getnstimeofday(&old_system);
+	rtc_tm_to_time(&tm, &old_rtc.tv_sec);
+
+
+	/*
+	 * To avoid drift caused by repeated suspend/resumes,
+	 * which each can add ~1 second drift error,
+	 * try to compensate so the difference in system time
+	 * and rtc time stays close to constant.
+	 */
+	delta = timespec_sub(old_system, old_rtc);
+	delta_delta = timespec_sub(delta, old_delta);
+	if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) {
+		/*
+		 * if delta_delta is too large, assume time correction
+		 * has occured and set old_delta to the current delta.
+		 */
+		old_delta = delta;
+	} else {
+		/* Otherwise try to adjust old_system to compensate */
+		old_system = timespec_sub(old_system, delta_delta);
+	}
 
 	return 0;
 }
@@ -63,32 +84,42 @@ static int rtc_resume(struct device *dev)
 {
 	struct rtc_device	*rtc = to_rtc_device(dev);
 	struct rtc_time		tm;
-	time_t			newtime;
-	struct timespec		time;
-	struct timespec		newts;
+	struct timespec		new_system, new_rtc;
+	struct timespec		sleep_time;
 
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
-	ktime_get_ts(&newts);
+	/* snapshot the current rtc and system time at resume */
+	getnstimeofday(&new_system);
 	rtc_read_time(rtc, &tm);
 	if (rtc_valid_tm(&tm) != 0) {
 		pr_debug("%s:  bogus resume time\n", dev_name(&rtc->dev));
 		return 0;
 	}
-	rtc_tm_to_time(&tm, &newtime);
-	if (newtime <= oldtime) {
-		if (newtime < oldtime)
-			pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
+	rtc_tm_to_time(&tm, &new_rtc.tv_sec);
+	new_rtc.tv_nsec = 0;
+
+	if (new_rtc.tv_sec < old_rtc.tv_sec) {
+		pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
 		return 0;
 	}
-	/* calculate the RTC time delta */
-	set_normalized_timespec(&time, newtime - oldtime, 0);
-
-	/* subtract kernel time between rtc_suspend to rtc_resume */
-	time = timespec_sub(time, timespec_sub(newts, oldts));
 
-	timekeeping_inject_sleeptime(&time);
+	/* calculate the RTC time delta (sleep time)*/
+	sleep_time = timespec_sub(new_rtc, old_rtc);
+
+	/*
+	 * Since these RTC suspend/resume handlers are not called
+	 * at the very end of suspend or the start of resume,
+	 * some run-time may pass on either sides of the sleep time
+	 * so subtract kernel run-time between rtc_suspend to rtc_resume
+	 * to keep things accurate.
+	 */
+	sleep_time = timespec_sub(sleep_time,
+			timespec_sub(new_system, old_system));
+
+	if (sleep_time.tv_sec >= 0)
+		timekeeping_inject_sleeptime(&sleep_time);
 	return 0;
 }
 
-- 
cgit v1.1