From 8ae12a0d85987dc138f8c944cb78a92bf466cea0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 8 Jan 2006 13:34:19 -0800 Subject: [PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi.c | 568 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 568 insertions(+) create mode 100644 drivers/spi/spi.c (limited to 'drivers/spi/spi.c') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c new file mode 100644 index 0000000..7cd356b --- /dev/null +++ b/drivers/spi/spi.c @@ -0,0 +1,568 @@ +/* + * spi.c - SPI init/core code + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + + +/* SPI bustype and spi_master class are registered during early boot, + * usually before board init code provides the SPI device tables, and + * are available later when driver init code needs them. + * + * Drivers for SPI devices started out like those for platform bus + * devices. But both have changed in 2.6.15; maybe this should get + * an "spi_driver" structure at some point (not currently needed) + */ +static void spidev_release(struct device *dev) +{ + const struct spi_device *spi = to_spi_device(dev); + + /* spi masters may cleanup for released devices */ + if (spi->master->cleanup) + spi->master->cleanup(spi); + + class_device_put(&spi->master->cdev); + kfree(dev); +} + +static ssize_t +modalias_show(struct device *dev, struct device_attribute *a, char *buf) +{ + const struct spi_device *spi = to_spi_device(dev); + + return snprintf(buf, BUS_ID_SIZE + 1, "%s\n", spi->modalias); +} + +static struct device_attribute spi_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_NULL, +}; + +/* modalias support makes "modprobe $MODALIAS" new-style hotplug work, + * and the sysfs version makes coldplug work too. + */ + +static int spi_match_device(struct device *dev, struct device_driver *drv) +{ + const struct spi_device *spi = to_spi_device(dev); + + return strncmp(spi->modalias, drv->name, BUS_ID_SIZE) == 0; +} + +static int spi_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + const struct spi_device *spi = to_spi_device(dev); + + envp[0] = buffer; + snprintf(buffer, buffer_size, "MODALIAS=%s", spi->modalias); + envp[1] = NULL; + return 0; +} + +#ifdef CONFIG_PM + +/* Suspend/resume in "struct device_driver" don't really need that + * strange third parameter, so we just make it a constant and expect + * SPI drivers to ignore it just like most platform drivers do. + * + * NOTE: the suspend() method for an spi_master controller driver + * should verify that all its child devices are marked as suspended; + * suspend requests delivered through sysfs power/state files don't + * enforce such constraints. + */ +static int spi_suspend(struct device *dev, pm_message_t message) +{ + int value; + + if (!dev->driver || !dev->driver->suspend) + return 0; + + /* suspend will stop irqs and dma; no more i/o */ + value = dev->driver->suspend(dev, message); + if (value == 0) + dev->power.power_state = message; + return value; +} + +static int spi_resume(struct device *dev) +{ + int value; + + if (!dev->driver || !dev->driver->resume) + return 0; + + /* resume may restart the i/o queue */ + value = dev->driver->resume(dev); + if (value == 0) + dev->power.power_state = PMSG_ON; + return value; +} + +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +struct bus_type spi_bus_type = { + .name = "spi", + .dev_attrs = spi_dev_attrs, + .match = spi_match_device, + .uevent = spi_uevent, + .suspend = spi_suspend, + .resume = spi_resume, +}; +EXPORT_SYMBOL_GPL(spi_bus_type); + +/*-------------------------------------------------------------------------*/ + +/* SPI devices should normally not be created by SPI device drivers; that + * would make them board-specific. Similarly with SPI master drivers. + * Device registration normally goes into like arch/.../mach.../board-YYY.c + * with other readonly (flashable) information about mainboard devices. + */ + +struct boardinfo { + struct list_head list; + unsigned n_board_info; + struct spi_board_info board_info[0]; +}; + +static LIST_HEAD(board_list); +static DECLARE_MUTEX(board_lock); + + +/* On typical mainboards, this is purely internal; and it's not needed + * after board init creates the hard-wired devices. Some development + * platforms may not be able to use spi_register_board_info though, and + * this is exported so that for example a USB or parport based adapter + * driver could add devices (which it would learn about out-of-band). + */ +struct spi_device *__init_or_module +spi_new_device(struct spi_master *master, struct spi_board_info *chip) +{ + struct spi_device *proxy; + struct device *dev = master->cdev.dev; + int status; + + /* NOTE: caller did any chip->bus_num checks necessary */ + + if (!class_device_get(&master->cdev)) + return NULL; + + proxy = kzalloc(sizeof *proxy, GFP_KERNEL); + if (!proxy) { + dev_err(dev, "can't alloc dev for cs%d\n", + chip->chip_select); + goto fail; + } + proxy->master = master; + proxy->chip_select = chip->chip_select; + proxy->max_speed_hz = chip->max_speed_hz; + proxy->irq = chip->irq; + proxy->modalias = chip->modalias; + + snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id, + "%s.%u", master->cdev.class_id, + chip->chip_select); + proxy->dev.parent = dev; + proxy->dev.bus = &spi_bus_type; + proxy->dev.platform_data = (void *) chip->platform_data; + proxy->controller_data = chip->controller_data; + proxy->controller_state = NULL; + proxy->dev.release = spidev_release; + + /* drivers may modify this default i/o setup */ + status = master->setup(proxy); + if (status < 0) { + dev_dbg(dev, "can't %s %s, status %d\n", + "setup", proxy->dev.bus_id, status); + goto fail; + } + + /* driver core catches callers that misbehave by defining + * devices that already exist. + */ + status = device_register(&proxy->dev); + if (status < 0) { + dev_dbg(dev, "can't %s %s, status %d\n", + "add", proxy->dev.bus_id, status); +fail: + class_device_put(&master->cdev); + kfree(proxy); + return NULL; + } + dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id); + return proxy; +} +EXPORT_SYMBOL_GPL(spi_new_device); + +/* + * Board-specific early init code calls this (probably during arch_initcall) + * with segments of the SPI device table. Any device nodes are created later, + * after the relevant parent SPI controller (bus_num) is defined. We keep + * this table of devices forever, so that reloading a controller driver will + * not make Linux forget about these hard-wired devices. + * + * Other code can also call this, e.g. a particular add-on board might provide + * SPI devices through its expansion connector, so code initializing that board + * would naturally declare its SPI devices. + * + * The board info passed can safely be __initdata ... but be careful of + * any embedded pointers (platform_data, etc), they're copied as-is. + */ +int __init +spi_register_board_info(struct spi_board_info const *info, unsigned n) +{ + struct boardinfo *bi; + + bi = kmalloc (sizeof (*bi) + n * sizeof (*info), GFP_KERNEL); + if (!bi) + return -ENOMEM; + bi->n_board_info = n; + memcpy(bi->board_info, info, n * sizeof (*info)); + + down(&board_lock); + list_add_tail(&bi->list, &board_list); + up(&board_lock); + return 0; +} +EXPORT_SYMBOL_GPL(spi_register_board_info); + +/* FIXME someone should add support for a __setup("spi", ...) that + * creates board info from kernel command lines + */ + +static void __init_or_module +scan_boardinfo(struct spi_master *master) +{ + struct boardinfo *bi; + struct device *dev = master->cdev.dev; + + down(&board_lock); + list_for_each_entry(bi, &board_list, list) { + struct spi_board_info *chip = bi->board_info; + unsigned n; + + for (n = bi->n_board_info; n > 0; n--, chip++) { + if (chip->bus_num != master->bus_num) + continue; + /* some controllers only have one chip, so they + * might not use chipselects. otherwise, the + * chipselects are numbered 0..max. + */ + if (chip->chip_select >= master->num_chipselect + && master->num_chipselect) { + dev_dbg(dev, "cs%d > max %d\n", + chip->chip_select, + master->num_chipselect); + continue; + } + (void) spi_new_device(master, chip); + } + } + up(&board_lock); +} + +/*-------------------------------------------------------------------------*/ + +static void spi_master_release(struct class_device *cdev) +{ + struct spi_master *master; + + master = container_of(cdev, struct spi_master, cdev); + put_device(master->cdev.dev); + master->cdev.dev = NULL; + kfree(master); +} + +static struct class spi_master_class = { + .name = "spi_master", + .owner = THIS_MODULE, + .release = spi_master_release, +}; + + +/** + * spi_alloc_master - allocate SPI master controller + * @dev: the controller, possibly using the platform_bus + * @size: how much driver-private data to preallocate; a pointer to this + * memory in the class_data field of the returned class_device + * + * This call is used only by SPI master controller drivers, which are the + * only ones directly touching chip registers. It's how they allocate + * an spi_master structure, prior to calling spi_add_master(). + * + * This must be called from context that can sleep. It returns the SPI + * master structure on success, else NULL. + * + * The caller is responsible for assigning the bus number and initializing + * the master's methods before calling spi_add_master(), or else (on error) + * calling class_device_put() to prevent a memory leak. + */ +struct spi_master * __init_or_module +spi_alloc_master(struct device *dev, unsigned size) +{ + struct spi_master *master; + + master = kzalloc(size + sizeof *master, SLAB_KERNEL); + if (!master) + return NULL; + + master->cdev.class = &spi_master_class; + master->cdev.dev = get_device(dev); + class_set_devdata(&master->cdev, &master[1]); + + return master; +} +EXPORT_SYMBOL_GPL(spi_alloc_master); + +/** + * spi_register_master - register SPI master controller + * @master: initialized master, originally from spi_alloc_master() + * + * SPI master controllers connect to their drivers using some non-SPI bus, + * such as the platform bus. The final stage of probe() in that code + * includes calling spi_register_master() to hook up to this SPI bus glue. + * + * SPI controllers use board specific (often SOC specific) bus numbers, + * and board-specific addressing for SPI devices combines those numbers + * with chip select numbers. Since SPI does not directly support dynamic + * device identification, boards need configuration tables telling which + * chip is at which address. + * + * This must be called from context that can sleep. It returns zero on + * success, else a negative error code (dropping the master's refcount). + */ +int __init_or_module +spi_register_master(struct spi_master *master) +{ + static atomic_t dyn_bus_id = ATOMIC_INIT(0); + struct device *dev = master->cdev.dev; + int status = -ENODEV; + int dynamic = 0; + + /* convention: dynamically assigned bus IDs count down from the max */ + if (master->bus_num == 0) { + master->bus_num = atomic_dec_return(&dyn_bus_id); + dynamic = 0; + } + + /* register the device, then userspace will see it. + * registration fails if the bus ID is in use. + */ + snprintf(master->cdev.class_id, sizeof master->cdev.class_id, + "spi%u", master->bus_num); + status = class_device_register(&master->cdev); + if (status < 0) { + class_device_put(&master->cdev); + goto done; + } + dev_dbg(dev, "registered master %s%s\n", master->cdev.class_id, + dynamic ? " (dynamic)" : ""); + + /* populate children from any spi device tables */ + scan_boardinfo(master); + status = 0; +done: + return status; +} +EXPORT_SYMBOL_GPL(spi_register_master); + + +static int __unregister(struct device *dev, void *unused) +{ + /* note: before about 2.6.14-rc1 this would corrupt memory: */ + device_unregister(dev); + return 0; +} + +/** + * spi_unregister_master - unregister SPI master controller + * @master: the master being unregistered + * + * This call is used only by SPI master controller drivers, which are the + * only ones directly touching chip registers. + * + * This must be called from context that can sleep. + */ +void spi_unregister_master(struct spi_master *master) +{ + class_device_unregister(&master->cdev); + (void) device_for_each_child(master->cdev.dev, NULL, __unregister); +} +EXPORT_SYMBOL_GPL(spi_unregister_master); + +/** + * spi_busnum_to_master - look up master associated with bus_num + * @bus_num: the master's bus number + * + * This call may be used with devices that are registered after + * arch init time. It returns a refcounted pointer to the relevant + * spi_master (which the caller must release), or NULL if there is + * no such master registered. + */ +struct spi_master *spi_busnum_to_master(u16 bus_num) +{ + if (bus_num) { + char name[8]; + struct kobject *bus; + + snprintf(name, sizeof name, "spi%u", bus_num); + bus = kset_find_obj(&spi_master_class.subsys.kset, name); + if (bus) + return container_of(bus, struct spi_master, cdev.kobj); + } + return NULL; +} +EXPORT_SYMBOL_GPL(spi_busnum_to_master); + + +/*-------------------------------------------------------------------------*/ + +/** + * spi_sync - blocking/synchronous SPI data transfers + * @spi: device with which data will be exchanged + * @message: describes the data transfers + * + * This call may only be used from a context that may sleep. The sleep + * is non-interruptible, and has no timeout. Low-overhead controller + * drivers may DMA directly into and out of the message buffers. + * + * Note that the SPI device's chip select is active during the message, + * and then is normally disabled between messages. Drivers for some + * frequently-used devices may want to minimize costs of selecting a chip, + * by leaving it selected in anticipation that the next message will go + * to the same chip. (That may increase power usage.) + * + * The return value is a negative error code if the message could not be + * submitted, else zero. When the value is zero, then message->status is + * also defined: it's the completion code for the transfer, either zero + * or a negative error code from the controller driver. + */ +int spi_sync(struct spi_device *spi, struct spi_message *message) +{ + DECLARE_COMPLETION(done); + int status; + + message->complete = (void (*)(void *)) complete; + message->context = &done; + status = spi_async(spi, message); + if (status == 0) + wait_for_completion(&done); + message->context = NULL; + return status; +} +EXPORT_SYMBOL_GPL(spi_sync); + +#define SPI_BUFSIZ (SMP_CACHE_BYTES) + +static u8 *buf; + +/** + * spi_write_then_read - SPI synchronous write followed by read + * @spi: device with which data will be exchanged + * @txbuf: data to be written (need not be dma-safe) + * @n_tx: size of txbuf, in bytes + * @rxbuf: buffer into which data will be read + * @n_rx: size of rxbuf, in bytes (need not be dma-safe) + * + * This performs a half duplex MicroWire style transaction with the + * device, sending txbuf and then reading rxbuf. The return value + * is zero for success, else a negative errno status code. + * + * Parameters to this routine are always copied using a small buffer, + * large transfers should use use spi_{async,sync}() calls with + * dma-safe buffers. + */ +int spi_write_then_read(struct spi_device *spi, + const u8 *txbuf, unsigned n_tx, + u8 *rxbuf, unsigned n_rx) +{ + static DECLARE_MUTEX(lock); + + int status; + struct spi_message message; + struct spi_transfer x[2]; + u8 *local_buf; + + /* Use preallocated DMA-safe buffer. We can't avoid copying here, + * (as a pure convenience thing), but we can keep heap costs + * out of the hot path ... + */ + if ((n_tx + n_rx) > SPI_BUFSIZ) + return -EINVAL; + + /* ... unless someone else is using the pre-allocated buffer */ + if (down_trylock(&lock)) { + local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); + if (!local_buf) + return -ENOMEM; + } else + local_buf = buf; + + memset(x, 0, sizeof x); + + memcpy(local_buf, txbuf, n_tx); + x[0].tx_buf = local_buf; + x[0].len = n_tx; + + x[1].rx_buf = local_buf + n_tx; + x[1].len = n_rx; + + /* do the i/o */ + message.transfers = x; + message.n_transfer = ARRAY_SIZE(x); + status = spi_sync(spi, &message); + if (status == 0) { + memcpy(rxbuf, x[1].rx_buf, n_rx); + status = message.status; + } + + if (x[0].tx_buf == buf) + up(&lock); + else + kfree(local_buf); + + return status; +} +EXPORT_SYMBOL_GPL(spi_write_then_read); + +/*-------------------------------------------------------------------------*/ + +static int __init spi_init(void) +{ + buf = kmalloc(SPI_BUFSIZ, SLAB_KERNEL); + if (!buf) + return -ENOMEM; + + bus_register(&spi_bus_type); + class_register(&spi_master_class); + return 0; +} +/* board_info is normally registered in arch_initcall(), + * but even essential drivers wait till later + */ +subsys_initcall(spi_init); + -- cgit v1.1