From 8fc8598e61f6f384f3eaf1d9b09500c12af47b37 Mon Sep 17 00:00:00 2001 From: Jerry Chuang Date: Tue, 3 Nov 2009 07:17:11 -0200 Subject: Staging: Added Realtek rtl8192u driver to staging Add Realtek linux driver for rtl8192u as provided by Realtek rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML. This version won't compile against upstream, doesn't follow Linux CodingStyle and has their own ieee80211 stack. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8192U_hw.h | 746 +++++++++++++++++++++++++++++++++++ 1 file changed, 746 insertions(+) create mode 100644 drivers/staging/rtl8192u/r8192U_hw.h (limited to 'drivers/staging/rtl8192u/r8192U_hw.h') diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h new file mode 100644 index 0000000..1ebacc9 --- /dev/null +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -0,0 +1,746 @@ +/* + This is part of rtl8187 OpenSource driver. + Copyright (C) Andrea Merello 2004-2005 + Released under the terms of GPL (General Public Licence) + + Parts of this driver are based on the GPL part of the + official Realtek driver. + Parts of this driver are based on the rtl8180 driver skeleton + from Patric Schenke & Andres Salomon. + Parts of this driver are based on the Intel Pro Wireless + 2100 GPL driver. + + We want to tanks the Authors of those projects + and the Ndiswrapper project Authors. +*/ + +/* Mariusz Matuszek added full registers definition with Realtek's name */ + +/* this file contains register definitions for the rtl8187 MAC controller */ +#ifndef R8192_HW +#define R8192_HW + +typedef enum _VERSION_819xU{ + VERSION_819xU_A, // A-cut + VERSION_819xU_B, // B-cut + VERSION_819xU_C,// C-cut +}VERSION_819xU,*PVERSION_819xU; +//added for different RF type +typedef enum _RT_RF_TYPE_DEF +{ + RF_1T2R = 0, + RF_2T4R, + + RF_819X_MAX_TYPE +}RT_RF_TYPE_DEF; + + +typedef enum _BaseBand_Config_Type{ + BaseBand_Config_PHY_REG = 0, //Radio Path A + BaseBand_Config_AGC_TAB = 1, //Radio Path B +}BaseBand_Config_Type, *PBaseBand_Config_Type; +#if 0 +typedef enum _RT_RF_TYPE_819xU{ + RF_TYPE_MIN = 0, + RF_8225, + RF_8256, + RF_8258, + RF_PSEUDO_11N = 4, +}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU; +#endif +#define RTL8187_REQT_READ 0xc0 +#define RTL8187_REQT_WRITE 0x40 +#define RTL8187_REQ_GET_REGS 0x05 +#define RTL8187_REQ_SET_REGS 0x05 + +#define MAX_TX_URB 5 +#define MAX_RX_URB 16 + +#define R8180_MAX_RETRY 255 +//#define MAX_RX_NORMAL_URB 3 +//#define MAX_RX_COMMAND_URB 2 +#define RX_URB_SIZE 9100 + +#define BB_ANTATTEN_CHAN14 0x0c +#define BB_ANTENNA_B 0x40 + +#define BB_HOST_BANG (1<<30) +#define BB_HOST_BANG_EN (1<<2) +#define BB_HOST_BANG_CLK (1<<1) +#define BB_HOST_BANG_RW (1<<3) +#define BB_HOST_BANG_DATA 1 + +//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920) +#define AFR 0x010 +#define AFR_CardBEn (1<<0) +#define AFR_CLKRUN_SEL (1<<1) +#define AFR_FuncRegEn (1<<2) +#define RTL8190_EEPROM_ID 0x8129 +#define EEPROM_VID 0x02 +#define EEPROM_PID 0x04 +#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C + +#define EEPROM_TxPowerDiff 0x1F +#define EEPROM_ThermalMeter 0x20 +#define EEPROM_PwDiff 0x21 //0x21 +#define EEPROM_CrystalCap 0x22 //0x22 + +#define EEPROM_TxPwIndex_CCK 0x23 //0x23 +#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26 +#define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B +#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E +#define EEPROM_TxPwIndex_Ver 0x27 //0x27 + +#define EEPROM_Default_TxPowerDiff 0x0 +#define EEPROM_Default_ThermalMeter 0x7 +#define EEPROM_Default_PwDiff 0x4 +#define EEPROM_Default_CrystalCap 0x5 +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID +#define EEPROM_ChannelPlan 0x16 //0x7C +#define EEPROM_IC_VER 0x7d //0x7D +#define EEPROM_CRC 0x7e //0x7E~0x7F + +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_CAMEO 0x1 +#define EEPROM_CID_RUNTOP 0x2 +#define EEPROM_CID_Senao 0x3 +#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31 +#define EEPROM_CID_NetCore 0x5 +#define EEPROM_CID_Nettronix 0x6 +#define EEPROM_CID_Pronet 0x7 +#define EEPROM_CID_DLINK 0x8 + +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + +//#endif +enum _RTL8192Usb_HW { + + PCIF = 0x009, // PCI Function Register 0x0009h~0x000bh +#define BB_GLOBAL_RESET_BIT 0x1 + BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register + BSSIDR = 0x02E, // BSSID Register + CMDR = 0x037, // Command register +#define CR_RST 0x10 +#define CR_RE 0x08 +#define CR_TE 0x04 +#define CR_MulRW 0x01 + SIFS = 0x03E, // SIFS register + TCR = 0x040, // Transmit Configuration Register + +#define TCR_MXDMA_2048 7 +#define TCR_LRL_OFFSET 0 +#define TCR_SRL_OFFSET 8 +#define TCR_MXDMA_OFFSET 21 +#define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer + RCR = 0x044, // Receive Configuration Register +#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \ + (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23)) +#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15)) +#define RX_FIFO_THRESHOLD_SHIFT 13 +#define RX_FIFO_THRESHOLD_128 3 +#define RX_FIFO_THRESHOLD_256 4 +#define RX_FIFO_THRESHOLD_512 5 +#define RX_FIFO_THRESHOLD_1024 6 +#define RX_FIFO_THRESHOLD_NONE 7 +#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10)) +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 +#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size. +#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2 +#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1 +#define RCR_ENMBID BIT27 // Enable Multiple BssId. +#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames +#define RCR_CBSSID BIT23 // Accept BSSID match packet +#define RCR_APWRMGT BIT22 // Accept power management packet +#define RCR_ADD3 BIT21 // Accept address 3 match packet +#define RCR_AMF BIT20 // Accept management type frame +#define RCR_ACF BIT19 // Accept control type frame +#define RCR_ADF BIT18 // Accept data type frame +#define RCR_RXFTH BIT13 // Rx FIFO Threshold +#define RCR_AICV BIT12 // Accept ICV error packet +#define RCR_ACRC32 BIT5 // Accept CRC32 error packet +#define RCR_AB BIT3 // Accept broadcast packet +#define RCR_AM BIT2 // Accept multicast packet +#define RCR_APM BIT1 // Accept physical match packet +#define RCR_AAP BIT0 // Accept all unicast packet + SLOT_TIME = 0x049, // Slot Time Register + ACK_TIMEOUT = 0x04c, // Ack Timeout Register + PIFS_TIME = 0x04d, // PIFS time + USTIME = 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock. + EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE + EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK + EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO + EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI + RFPC = 0x05F, // Rx FIFO Packet Count + CWRR = 0x060, // Contention Window Report Register + BCN_TCFG = 0x062, // Beacon Time Configuration +#define BCN_TCFG_CW_SHIFT 8 +#define BCN_TCFG_IFS 0 + BCN_INTERVAL = 0x070, // Beacon Interval (TU) + ATIMWND = 0x072, // ATIM Window Size (TU) + BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT + BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA + BCN_ERR_THRESH = 0x078, // Beacon Error Threshold + RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd + WCAMI = 0x0A4, // Software write CAM input content + RCAMO = 0x0A8, // Software read/write CAM config + SECR = 0x0B0, //Security Configuration Register +#define SCR_TxUseDK BIT0 //Force Tx Use Default Key +#define SCR_RxUseDK BIT1 //Force Rx Use Default Key +#define SCR_TxEncEnable BIT2 //Enable Tx Encryption +#define SCR_RxDecEnable BIT3 //Enable Rx Decryption +#define SCR_SKByA2 BIT4 //Search kEY BY A2 +#define SCR_NoSKMC BIT5 //No Key Search for Multicast +#define SCR_UseDK 0x01 +#define SCR_TxSecEnable 0x02 +#define SCR_RxSecEnable 0x04 + TPPoll = 0x0fd, // Transmit priority polling register + PSR = 0x0ff, // Page Select Register +#define CPU_CCK_LOOPBACK 0x00030000 +#define CPU_GEN_SYSTEM_RESET 0x00000001 +#define CPU_GEN_FIRMWARE_RESET 0x00000008 +#define CPU_GEN_BOOT_RDY 0x00000010 +#define CPU_GEN_FIRM_RDY 0x00000020 +#define CPU_GEN_PUT_CODE_OK 0x00000080 +#define CPU_GEN_BB_RST 0x00000100 +#define CPU_GEN_PWR_STB_CPU 0x00000004 +#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 +#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 + +//---------------------------------------------------------------------------- +// 8190 CPU General Register (offset 0x100, 4 byte) +//---------------------------------------------------------------------------- +#define CPU_CCK_LOOPBACK 0x00030000 +#define CPU_GEN_SYSTEM_RESET 0x00000001 +#define CPU_GEN_FIRMWARE_RESET 0x00000008 +#define CPU_GEN_BOOT_RDY 0x00000010 +#define CPU_GEN_FIRM_RDY 0x00000020 +#define CPU_GEN_PUT_CODE_OK 0x00000080 +#define CPU_GEN_BB_RST 0x00000100 +#define CPU_GEN_PWR_STB_CPU 0x00000004 +#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 +#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 + CPU_GEN = 0x100, // CPU Reset Register + LED1Cfg = 0x154,// LED1 Configuration Register + LED0Cfg = 0x155,// LED0 Configuration Register + + AcmAvg = 0x170, // ACM Average Period Register + AcmHwCtrl = 0x171, // ACM Hardware Control Register +//---------------------------------------------------------------------------- +//// +//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte) +////---------------------------------------------------------------------------- +// +#define AcmHw_HwEn BIT0 +#define AcmHw_BeqEn BIT1 +#define AcmHw_ViqEn BIT2 +#define AcmHw_VoqEn BIT3 +#define AcmHw_BeqStatus BIT4 +#define AcmHw_ViqStatus BIT5 +#define AcmHw_VoqStatus BIT6 + + AcmFwCtrl = 0x172, // ACM Firmware Control Register + AES_11N_FIX = 0x173, + VOAdmTime = 0x174, // VO Queue Admitted Time Register + VIAdmTime = 0x178, // VI Queue Admitted Time Register + BEAdmTime = 0x17C, // BE Queue Admitted Time Register + RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk + RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High + RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public, +// QPRR = 0x1E0, // Queue Page Report per TID + QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID + BQDA = 0x200, // Beacon Queue Descriptor Address + HQDA = 0x204, // High Priority Queue Descriptor Address + CQDA = 0x208, // Command Queue Descriptor Address + MQDA = 0x20C, // Management Queue Descriptor Address + HCCAQDA = 0x210, // HCCA Queue Descriptor Address + VOQDA = 0x214, // VO Queue Descriptor Address + VIQDA = 0x218, // VI Queue Descriptor Address + BEQDA = 0x21C, // BE Queue Descriptor Address + BKQDA = 0x220, // BK Queue Descriptor Address + RCQDA = 0x224, // Receive command Queue Descriptor Address + RDQDA = 0x228, // Receive Queue Descriptor Start Address + + MAR0 = 0x240, // Multicast filter. + MAR4 = 0x244, + + CCX_PERIOD = 0x250, // CCX Measurement Period Register, in unit of TU. + CLM_RESULT = 0x251, // CCA Busy fraction register. + NHM_PERIOD = 0x252, // NHM Measurement Period register, in unit of TU. + + NHM_THRESHOLD0 = 0x253, // Noise Histogram Meashorement0. + NHM_THRESHOLD1 = 0x254, // Noise Histogram Meashorement1. + NHM_THRESHOLD2 = 0x255, // Noise Histogram Meashorement2. + NHM_THRESHOLD3 = 0x256, // Noise Histogram Meashorement3. + NHM_THRESHOLD4 = 0x257, // Noise Histogram Meashorement4. + NHM_THRESHOLD5 = 0x258, // Noise Histogram Meashorement5. + NHM_THRESHOLD6 = 0x259, // Noise Histogram Meashorement6 + + MCTRL = 0x25A, // Measurement Control + + NHM_RPI_COUNTER0 = 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0. + NHM_RPI_COUNTER1 = 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1]. + NHM_RPI_COUNTER2 = 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2]. + NHM_RPI_COUNTER3 = 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3]. + NHM_RPI_COUNTER4 = 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4]. + NHM_RPI_COUNTER5 = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5]. + NHM_RPI_COUNTER6 = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6]. + NHM_RPI_COUNTER7 = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7]. +#define BW_OPMODE_11J BIT0 +#define BW_OPMODE_5G BIT1 +#define BW_OPMODE_20MHZ BIT2 + BW_OPMODE = 0x300, // Bandwidth operation mode + MSR = 0x303, // Media Status register +#define MSR_LINK_MASK ((1<<0)|(1<<1)) +#define MSR_LINK_MANAGED 2 +#define MSR_LINK_NONE 0 +#define MSR_LINK_SHIFT 0 +#define MSR_LINK_ADHOC 1 +#define MSR_LINK_MASTER 3 +#define MSR_LINK_ENEDCA (1<<4) + RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + TSFR = 0x308, + RRSR = 0x310, // Response Rate Set +#define RRSR_RSC_OFFSET 21 +#define RRSR_SHORT_OFFSET 23 +#define RRSR_RSC_DUPLICATE 0x600000 +#define RRSR_RSC_LOWSUBCHNL 0x400000 +#define RRSR_RSC_UPSUBCHANL 0x200000 +#define RRSR_SHORT 0x800000 +#define RRSR_1M BIT0 +#define RRSR_2M BIT1 +#define RRSR_5_5M BIT2 +#define RRSR_11M BIT3 +#define RRSR_6M BIT4 +#define RRSR_9M BIT5 +#define RRSR_12M BIT6 +#define RRSR_18M BIT7 +#define RRSR_24M BIT8 +#define RRSR_36M BIT9 +#define RRSR_48M BIT10 +#define RRSR_54M BIT11 +#define RRSR_MCS0 BIT12 +#define RRSR_MCS1 BIT13 +#define RRSR_MCS2 BIT14 +#define RRSR_MCS3 BIT15 +#define RRSR_MCS4 BIT16 +#define RRSR_MCS5 BIT17 +#define RRSR_MCS6 BIT18 +#define RRSR_MCS7 BIT19 +#define BRSR_AckShortPmb BIT23 // CCK ACK: use Short Preamble or not. + RATR0 = 0x320, // Rate Adaptive Table register1 + UFWP = 0x318, + DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI +//---------------------------------------------------------------------------- +// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte) +//---------------------------------------------------------------------------- +//CCK +#define RATR_1M 0x00000001 +#define RATR_2M 0x00000002 +#define RATR_55M 0x00000004 +#define RATR_11M 0x00000008 +//OFDM +#define RATR_6M 0x00000010 +#define RATR_9M 0x00000020 +#define RATR_12M 0x00000040 +#define RATR_18M 0x00000080 +#define RATR_24M 0x00000100 +#define RATR_36M 0x00000200 +#define RATR_48M 0x00000400 +#define RATR_54M 0x00000800 +//MCS 1 Spatial Stream +#define RATR_MCS0 0x00001000 +#define RATR_MCS1 0x00002000 +#define RATR_MCS2 0x00004000 +#define RATR_MCS3 0x00008000 +#define RATR_MCS4 0x00010000 +#define RATR_MCS5 0x00020000 +#define RATR_MCS6 0x00040000 +#define RATR_MCS7 0x00080000 +//MCS 2 Spatial Stream +#define RATR_MCS8 0x00100000 +#define RATR_MCS9 0x00200000 +#define RATR_MCS10 0x00400000 +#define RATR_MCS11 0x00800000 +#define RATR_MCS12 0x01000000 +#define RATR_MCS13 0x02000000 +#define RATR_MCS14 0x04000000 +#define RATR_MCS15 0x08000000 +// ALL CCK Rate +#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M +#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\ + |RATR_36M|RATR_48M|RATR_54M +#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \ + RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7 +#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \ + RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 + + MCS_TXAGC = 0x340, // MCS AGC + CCK_TXAGC = 0x348, // CCK AGC +// ISR = 0x350, // Interrupt Status Register +// IMR = 0x354, // Interrupt Mask Register +// IMR_POLL = 0x360, + MacBlkCtrl = 0x403, // Mac block on/off control register + + EPROM_CMD = 0xfe58, +#define Cmd9346CR_9356SEL (1<<4) +#define EPROM_CMD_RESERVED_MASK (1<<5) +#define EPROM_CMD_OPERATING_MODE_SHIFT 6 +#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) +#define EPROM_CMD_CONFIG 0x3 +#define EPROM_CMD_NORMAL 0 +#define EPROM_CMD_LOAD 1 +#define EPROM_CMD_PROGRAM 2 +#define EPROM_CS_SHIFT 3 +#define EPROM_CK_SHIFT 2 +#define EPROM_W_SHIFT 1 +#define EPROM_R_SHIFT 0 + MAC0 = 0x000, + MAC1 = 0x001, + MAC2 = 0x002, + MAC3 = 0x003, + MAC4 = 0x004, + MAC5 = 0x005, + +#if 0 +/* 0x0006 - 0x0007 - reserved */ + RXFIFOCOUNT = 0x010, + TXFIFOCOUNT = 0x012, + BQREQ = 0x013, +/* 0x0010 - 0x0017 - reserved */ + TSFTR = 0x018, + TLPDA = 0x020, + TNPDA = 0x024, + THPDA = 0x028, + BSSID = 0x02E, + RESP_RATE = 0x034, + CMD = 0x037, +#define CMD_RST_SHIFT 4 +#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7)) +#define CMD_RX_ENABLE_SHIFT 3 +#define CMD_TX_ENABLE_SHIFT 2 +#define CR_RST ((1<< 4)) +#define CR_RE ((1<< 3)) +#define CR_TE ((1<< 2)) +#define CR_MulRW ((1<< 0)) + + INTA_MASK = 0x03c, + INTA = 0x03e, +#define INTA_TXOVERFLOW (1<<15) +#define INTA_TIMEOUT (1<<14) +#define INTA_BEACONTIMEOUT (1<<13) +#define INTA_ATIM (1<<12) +#define INTA_BEACONDESCERR (1<<11) +#define INTA_BEACONDESCOK (1<<10) +#define INTA_HIPRIORITYDESCERR (1<<9) +#define INTA_HIPRIORITYDESCOK (1<<8) +#define INTA_NORMPRIORITYDESCERR (1<<7) +#define INTA_NORMPRIORITYDESCOK (1<<6) +#define INTA_RXOVERFLOW (1<<5) +#define INTA_RXDESCERR (1<<4) +#define INTA_LOWPRIORITYDESCERR (1<<3) +#define INTA_LOWPRIORITYDESCOK (1<<2) +#define INTA_RXCRCERR (1<<1) +#define INTA_RXOK (1) + TX_CONF = 0x040, +#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30 +#define TX_LOOPBACK_SHIFT 17 +#define TX_LOOPBACK_MAC 1 +#define TX_LOOPBACK_BASEBAND 2 +#define TX_LOOPBACK_NONE 0 +#define TX_LOOPBACK_CONTINUE 3 +#define TX_LOOPBACK_MASK ((1<<17)|(1<<18)) +#define TX_LRLRETRY_SHIFT 0 +#define TX_SRLRETRY_SHIFT 8 +#define TX_NOICV_SHIFT 19 +#define TX_NOCRC_SHIFT 16 +#define TCR_DurProcMode ((1<<30)) +#define TCR_DISReqQsize ((1<<28)) +#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25)) +#define TCR_HWVERID_SHIFT 25 +#define TCR_SWPLCPLEN ((1<<24)) +#define TCR_PLCP_LEN TCR_SAT // rtl8180 +#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21)) +#define TCR_MXDMA_1024 6 +#define TCR_MXDMA_2048 7 +#define TCR_MXDMA_SHIFT 21 +#define TCR_DISCW ((1<<20)) +#define TCR_ICV ((1<<19)) +#define TCR_LBK ((1<<18)|(1<<17)) +#define TCR_LBK1 ((1<<18)) +#define TCR_LBK0 ((1<<17)) +#define TCR_CRC ((1<<16)) +#define TCR_SRL_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)) +#define TCR_LRL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)) +#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185 + RX_CONF = 0x044, +#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \ +(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23)) +#define RX_CHECK_BSSID_SHIFT 23 +#define ACCEPT_PWR_FRAME_SHIFT 22 +#define ACCEPT_MNG_FRAME_SHIFT 20 +#define ACCEPT_CTL_FRAME_SHIFT 19 +#define ACCEPT_DATA_FRAME_SHIFT 18 +#define ACCEPT_ICVERR_FRAME_SHIFT 12 +#define ACCEPT_CRCERR_FRAME_SHIFT 5 +#define ACCEPT_BCAST_FRAME_SHIFT 3 +#define ACCEPT_MCAST_FRAME_SHIFT 2 +#define ACCEPT_ALLMAC_FRAME_SHIFT 0 +#define ACCEPT_NICMAC_FRAME_SHIFT 1 +#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15)) +#define RX_FIFO_THRESHOLD_SHIFT 13 +#define RX_FIFO_THRESHOLD_128 3 +#define RX_FIFO_THRESHOLD_256 4 +#define RX_FIFO_THRESHOLD_512 5 +#define RX_FIFO_THRESHOLD_1024 6 +#define RX_FIFO_THRESHOLD_NONE 7 +#define RX_AUTORESETPHY_SHIFT 28 +#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10)) +#define MAX_RX_DMA_2048 7 +#define MAX_RX_DMA_1024 6 +#define MAX_RX_DMA_SHIFT 10 +#define RCR_ONLYERLPKT ((1<<31)) +#define RCR_CS_SHIFT 29 +#define RCR_CS_MASK ((1<<30) | (1<<29)) +#define RCR_ENMARP ((1<<28)) +#define RCR_CBSSID ((1<<23)) +#define RCR_APWRMGT ((1<<22)) +#define RCR_ADD3 ((1<<21)) +#define RCR_AMF ((1<<20)) +#define RCR_ACF ((1<<19)) +#define RCR_ADF ((1<<18)) +#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13)) +#define RCR_RXFTH2 ((1<<15)) +#define RCR_RXFTH1 ((1<<14)) +#define RCR_RXFTH0 ((1<<13)) +#define RCR_AICV ((1<<12)) +#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8)) +#define RCR_MXDMA2 ((1<<10)) +#define RCR_MXDMA1 ((1<< 9)) +#define RCR_MXDMA0 ((1<< 8)) +#define RCR_9356SEL ((1<< 6)) +#define RCR_ACRC32 ((1<< 5)) +#define RCR_AB ((1<< 3)) +#define RCR_AM ((1<< 2)) +#define RCR_APM ((1<< 1)) +#define RCR_AAP ((1<< 0)) + INT_TIMEOUT = 0x048, + TX_BEACON_RING_ADDR = 0x04c, + EPROM_CMD = 0x58, +#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4)) +#define EPROM_CMD_OPERATING_MODE_SHIFT 6 +#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) +#define EPROM_CMD_CONFIG 0x3 +#define EPROM_CMD_NORMAL 0 +#define EPROM_CMD_LOAD 1 +#define EPROM_CMD_PROGRAM 2 +#define EPROM_CS_SHIFT 3 +#define EPROM_CK_SHIFT 2 +#define EPROM_W_SHIFT 1 +#define EPROM_R_SHIFT 0 + CONFIG0 = 0x051, +#define CONFIG0_WEP104 ((1<<6)) +#define CONFIG0_LEDGPO_En ((1<<4)) +#define CONFIG0_Aux_Status ((1<<3)) +#define CONFIG0_GL ((1<<1)|(1<<0)) +#define CONFIG0_GL1 ((1<<1)) +#define CONFIG0_GL0 ((1<<0)) + CONFIG1 = 0x052, +#define CONFIG1_LEDS ((1<<7)|(1<<6)) +#define CONFIG1_LEDS1 ((1<<7)) +#define CONFIG1_LEDS0 ((1<<6)) +#define CONFIG1_LWACT ((1<<4)) +#define CONFIG1_MEMMAP ((1<<3)) +#define CONFIG1_IOMAP ((1<<2)) +#define CONFIG1_VPD ((1<<1)) +#define CONFIG1_PMEn ((1<<0)) + CONFIG2 = 0x053, +#define CONFIG2_LCK ((1<<7)) +#define CONFIG2_ANT ((1<<6)) +#define CONFIG2_DPS ((1<<3)) +#define CONFIG2_PAPE_sign ((1<<2)) +#define CONFIG2_PAPE_time ((1<<1)|(1<<0)) +#define CONFIG2_PAPE_time1 ((1<<1)) +#define CONFIG2_PAPE_time0 ((1<<0)) + ANA_PARAM = 0x054, + CONFIG3 = 0x059, +#define CONFIG3_GNTSel ((1<<7)) +#define CONFIG3_PARM_En ((1<<6)) +#define CONFIG3_Magic ((1<<5)) +#define CONFIG3_CardB_En ((1<<3)) +#define CONFIG3_CLKRUN_En ((1<<2)) +#define CONFIG3_FuncRegEn ((1<<1)) +#define CONFIG3_FBtbEn ((1<<0)) +#define CONFIG3_CLKRUN_SHIFT 2 +#define CONFIG3_ANAPARAM_W_SHIFT 6 + CONFIG4 = 0x05a, +#define CONFIG4_VCOPDN ((1<<7)) +#define CONFIG4_PWROFF ((1<<6)) +#define CONFIG4_PWRMGT ((1<<5)) +#define CONFIG4_LWPME ((1<<4)) +#define CONFIG4_LWPTN ((1<<2)) +#define CONFIG4_RFTYPE ((1<<1)|(1<<0)) +#define CONFIG4_RFTYPE1 ((1<<1)) +#define CONFIG4_RFTYPE0 ((1<<0)) + TESTR = 0x05b, +#define TFPC_AC 0x05C + +#define SCR 0x05F + PGSELECT = 0x05e, +#define PGSELECT_PG_SHIFT 0 + SECURITY = 0x05f, +#define SECURITY_WEP_TX_ENABLE_SHIFT 1 +#define SECURITY_WEP_RX_ENABLE_SHIFT 0 +#define SECURITY_ENCRYP_104 1 +#define SECURITY_ENCRYP_SHIFT 4 +#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5)) + ANA_PARAM2 = 0x060, + BEACON_INTERVAL = 0x070, +#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \ +(1<<6)|(1<<7)|(1<<8)|(1<<9)) + ATIM_WND = 0x072, +#define ATIM_WND_MASK (0x01FF) + BCN_INTR_ITV = 0x074, +#define BCN_INTR_ITV_MASK (0x01FF) + ATIM_INTR_ITV = 0x076, +#define ATIM_INTR_ITV_MASK (0x01FF) + AckTimeOutReg = 0x079, //ACK timeout register, in unit of 4 us. + PHY_ADR = 0x07c, + PHY_READ = 0x07e, + RFPinsOutput = 0x080, + RFPinsEnable = 0x082, + +//Page 0 + RFPinsSelect = 0x084, +#define SW_CONTROL_GPIO 0x400 + RFPinsInput = 0x086, + RF_PARA = 0x088, + RF_TIMING = 0x08c, + GP_ENABLE = 0x090, + GPIO = 0x091, + TX_AGC_CTL = 0x09c, +#define TX_AGC_CTL_PER_PACKET_TXAGC 0x01 +#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0 +#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1 +#define TX_AGC_CTL_FEEDBACK_ANT 2 +#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02 + OFDM_TXAGC = 0x09e, + ANTSEL = 0x09f, + WPA_CONFIG = 0x0b0, + SIFS = 0x0b4, + DIFS = 0x0b5, + SLOT = 0x0b6, + CW_CONF = 0x0bc, +#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02 +#define CW_CONF_PERPACKET_CW 0x01 +#define CW_CONF_PERPACKET_RETRY_SHIFT 1 +#define CW_CONF_PERPACKET_CW_SHIFT 0 + CW_VAL = 0x0bd, + RATE_FALLBACK = 0x0be, +#define MAX_RESP_RATE_SHIFT 4 +#define MIN_RESP_RATE_SHIFT 0 +#define RATE_FALLBACK_CTL_ENABLE 0x80 +#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00 + ACM_CONTROL = 0x0BF, // ACM Control Registe +//---------------------------------------------------------------------------- +// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte) +//---------------------------------------------------------------------------- +#define VOQ_ACM_EN (0x01 << 7) //BIT7 +#define VIQ_ACM_EN (0x01 << 6) //BIT6 +#define BEQ_ACM_EN (0x01 << 5) //BIT5 +#define ACM_HW_EN (0x01 << 4) //BIT4 +#define TXOPSEL (0x01 << 3) //BIT3 +#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time +#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time +#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time + CONFIG5 = 0x0D8, +#define CONFIG5_TX_FIFO_OK ((1<<7)) +#define CONFIG5_RX_FIFO_OK ((1<<6)) +#define CONFIG5_CALON ((1<<5)) +#define CONFIG5_EACPI ((1<<2)) +#define CONFIG5_LANWake ((1<<1)) +#define CONFIG5_PME_STS ((1<<0)) + TX_DMA_POLLING = 0x0d9, +#define TX_DMA_POLLING_BEACON_SHIFT 7 +#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6 +#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5 +#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4 +#define TX_DMA_STOP_BEACON_SHIFT 3 +#define TX_DMA_STOP_HIPRIORITY_SHIFT 2 +#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1 +#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0 + CWR = 0x0DC, + RetryCTR = 0x0DE, + INT_MIG = 0x0E2, // Interrupt Migration (0xE2 ~ 0xE3) + TID_AC_MAP = 0x0E8, // TID to AC Mapping Register + ANA_PARAM3 = 0x0EE, + + +//page 1 + Wakeup0 = 0x084, + Wakeup1 = 0x08C, + Wakeup2LD = 0x094, + Wakeup2HD = 0x09C, + Wakeup3LD = 0x0A4, + Wakeup3HD = 0x0AC, + Wakeup4LD = 0x0B4, + Wakeup4HD = 0x0BC, + CRC0 = 0x0C4, + CRC1 = 0x0C6, + CRC2 = 0x0C8, + CRC3 = 0x0CA, + CRC4 = 0x0CC, +/* 0x00CE - 0x00D3 - reserved */ + + RFSW_CTRL = 0x272, // 0x272-0x273. + +//Reg Diff between rtl8187 and rtl8187B +/**************************************************************************/ + BRSR_8187 = 0x02C, + BRSR_8187B = 0x034, +#define BRSR_BPLCP ((1<< 8)) +#define BRSR_MBR ((1<< 1)|(1<< 0)) +#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0)) +#define BRSR_MBR0 ((1<< 0)) +#define BRSR_MBR1 ((1<< 1)) + +/**************************************************************************/ + EIFS_8187 = 0x035, + EIFS_8187B = 0x02D, + +/**************************************************************************/ + FER = 0x0F0, + FEMR = 0x0F4, + FPSR = 0x0F8, + FFER = 0x0FC, + + AC_VO_PARAM = 0x0F0, // AC_VO Parameters Record + AC_VI_PARAM = 0x0F4, // AC_VI Parameters Record + AC_BE_PARAM = 0x0F8, // AC_BE Parameters Record + AC_BK_PARAM = 0x0FC, // AC_BK Parameters Record + TALLY_SEL = 0x0fc, +//---------------------------------------------------------------------------- +// 8187B AC_XX_PARAM bits +//---------------------------------------------------------------------------- +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + +#endif +}; +//---------------------------------------------------------------------------- +// 818xB AnaParm & AnaParm2 Register +//---------------------------------------------------------------------------- +//#define ANAPARM_ASIC_ON 0x45090658 +//#define ANAPARM2_ASIC_ON 0x727f3f52 +#define GPI 0x108 +#define GPO 0x109 +#define GPE 0x10a +#endif -- cgit v1.1