From c9c62f4e2c9b526c5cbade3f3a61f126e6587c16 Mon Sep 17 00:00:00 2001 From: Xenofon Foukas Date: Wed, 15 Dec 2010 19:44:20 +0200 Subject: Staging: comedi: Fix checkpatch.pl issues in file s526.c This patch fixes the following issues in s526.c: WARNING: printk() should include KERN_ facility level WARNING: line over 80 characters ERROR: do not use C99 // comments WARNING: space prohibited between function name and open parenthesis '(' WARNING: braces {} are not necessary for any arm of this statement WARNING: suspect code indent for conditional statements (16, 16) Signed-off-by: Xenofon Foukas Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/s526.c | 139 ++++++++++++++++++++-------------- 1 file changed, 82 insertions(+), 57 deletions(-) (limited to 'drivers/staging') diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 3607aae..2b34dae 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -114,7 +114,7 @@ static const int s526_ports[] = { }; struct counter_mode_register_t { -#if defined (__LITTLE_ENDIAN_BITFIELD) +#if defined(__LITTLE_ENDIAN_BITFIELD) unsigned short coutSource:1; unsigned short coutPolarity:1; unsigned short autoLoadResetRcap:3; @@ -207,7 +207,9 @@ static const struct s526_board s526_boards[] = { /* this structure is for data unique to this hardware driver. If several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device struct. */ + feel free to suggest moving the variable to the struct comedi_device + struct. +*/ struct s526_private { int data; @@ -304,7 +306,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* int subdev_channel = 0; */ union cmReg cmReg; - printk("comedi%d: s526: ", dev->minor); + printk(KERN_INFO "comedi%d: s526: ", dev->minor); iobase = it->options[0]; if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) { @@ -317,7 +319,8 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /*** make it a little quieter, exw, 8/29/06 for (i = 0; i < S526_NUM_PORTS; i++) { - printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i]))); + printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]), + inw(ADDR_REG(s526_ports[i]))); } ***/ @@ -402,7 +405,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->type = COMEDI_SUBD_UNUSED; } - printk("attached\n"); + printk(KERN_INFO "attached\n"); return 1; @@ -411,7 +414,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* One-shot (software trigger) */ cmReg.reg.coutSource = 0; /* out RCAP */ cmReg.reg.coutPolarity = 1; /* Polarity inverted */ - cmReg.reg.autoLoadResetRcap = 1; /* Auto load 0:disabled, 1:enabled */ + cmReg.reg.autoLoadResetRcap = 1;/* Auto load 0:disabled, 1:enabled */ cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ cmReg.reg.ctEnableCtrl = 2; /* Hardware */ cmReg.reg.clockSource = 2; /* Internal */ @@ -426,10 +429,12 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ - - outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */ + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Reset RCAP (fires one-shot) */ + outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); #else @@ -447,11 +452,12 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) cmReg.reg.reserved = 0; n = 0; - printk("Mode reg=0x%04x, 0x%04lx\n", cmReg.value, ADDR_CHAN_REG(REG_C0M, - n)); + printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n", + cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); udelay(1000); - printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); + printk(KERN_INFO "Read back mode reg=0x%04x\n", + inw(ADDR_CHAN_REG(REG_C0M, n))); /* Load the pre-load register high word */ /* value = (short) (0x55); */ @@ -466,20 +472,23 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); /* Reset the counter */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); /* Load the counter from PR0 */ + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); } outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); udelay(1000); - printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); + printk(KERN_INFO "Read back mode reg=0x%04x\n", + inw(ADDR_CHAN_REG(REG_C0M, n))); #endif - printk("Current registres:\n"); + printk(KERN_INFO "Current registres:\n"); for (i = 0; i < S526_NUM_PORTS; i++) { - printk("0x%02lx: 0x%04x\n", ADDR_REG(s526_ports[i]), - inw(ADDR_REG(s526_ports[i]))); + printk(KERN_INFO "0x%02lx: 0x%04x\n", + ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i]))); } return 1; } @@ -494,7 +503,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) */ static int s526_detach(struct comedi_device *dev) { - printk("comedi%d: s526: remove\n", dev->minor); + printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor); if (dev->iobase > 0) release_region(dev->iobase, S526_IOSIZE); @@ -513,7 +522,7 @@ static int s526_gpct_rinsn(struct comedi_device *dev, /* Check if (n > 0) */ if (insn->n <= 0) { - printk("s526: INSN_READ: n should be > 0\n"); + printk(KERN_ERR "s526: INSN_READ: n should be > 0\n"); return -EINVAL; } /* Read the low word first */ @@ -522,7 +531,8 @@ static int s526_gpct_rinsn(struct comedi_device *dev, datahigh = inw(ADDR_CHAN_REG(REG_C0H, counter_channel)); data[i] = (int)(datahigh & 0x00FF); data[i] = (data[i] << 16) | (datalow & 0xFFFF); -/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); */ + /* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", + counter_channel, data[i], datahigh, datalow); */ } return i; } @@ -536,7 +546,8 @@ static int s526_gpct_insn_config(struct comedi_device *dev, short value; union cmReg cmReg; -/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */ + /* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", + subdev_channel); */ for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) { devpriv->s526_gpct_config[subdev_channel].data[i] = @@ -554,7 +565,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[2]: Pre-load Register Value data[3]: Conter Control Register */ - printk("s526: GPCT_INSN_CONFIG: Configuring Encoder\n"); + printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n"); devpriv->s526_gpct_config[subdev_channel].app = PositionMeasurement; @@ -563,7 +574,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, /* One-shot (software trigger) */ cmReg.reg.coutSource = 0; /* out RCAP */ cmReg.reg.coutPolarity = 1; /* Polarity inverted */ - cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */ + cmReg.reg.autoLoadResetRcap = 0;/* Auto load disabled */ cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */ cmReg.reg.ctEnableCtrl = 2; /* Hardware */ cmReg.reg.clockSource = 2; /* Internal */ @@ -578,10 +589,13 @@ static int s526_gpct_insn_config(struct comedi_device *dev, outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel)); - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); - outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */ + /* Reset RCAP (fires one-shot) */ + outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); #endif @@ -594,30 +608,34 @@ static int s526_gpct_insn_config(struct comedi_device *dev, /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ -/* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); Load the counter from PR0 */ + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Load the counter from PR0 + * outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + */ } #else - cmReg.reg.countDirCtrl = 0; /* 0 quadrature, 1 software control */ + /* 0 quadrature, 1 software control */ + cmReg.reg.countDirCtrl = 0; /* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */ - if (insn->data[1] == GPCT_X2) { + if (insn->data[1] == GPCT_X2) cmReg.reg.clockSource = 1; - } else if (insn->data[1] == GPCT_X4) { + else if (insn->data[1] == GPCT_X4) cmReg.reg.clockSource = 2; - } else { + else cmReg.reg.clockSource = 0; - } /* When to take into account the indexpulse: */ - if (insn->data[2] == GPCT_IndexPhaseLowLow) { + /*if (insn->data[2] == GPCT_IndexPhaseLowLow) { } else if (insn->data[2] == GPCT_IndexPhaseLowHigh) { } else if (insn->data[2] == GPCT_IndexPhaseHighLow) { } else if (insn->data[2] == GPCT_IndexPhaseHighHigh) { - } + }*/ /* Take into account the index pulse? */ if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX) - cmReg.reg.autoLoadResetRcap = 4; /* Auto load with INDEX^ */ + /* Auto load with INDEX^ */ + cmReg.reg.autoLoadResetRcap = 4; /* Set Counter Mode Register */ cmReg.value = (short)(insn->data[1] & 0xFFFF); @@ -638,8 +656,10 @@ static int s526_gpct_insn_config(struct comedi_device *dev, } /* Reset the counter if it is software preload */ if (cmReg.reg.autoLoadResetRcap == 0) { - outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */ - outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */ + /* Reset the counter */ + outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); + /* Load the counter from PR0 */ + outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); } #endif break; @@ -652,7 +672,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[3]: Pre-load Register 1 Value data[4]: Conter Control Register */ - printk("s526: GPCT_INSN_CONFIG: Configuring SPG\n"); + printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n"); devpriv->s526_gpct_config[subdev_channel].app = SinglePulseGeneration; @@ -697,7 +717,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[3]: Pre-load Register 1 Value data[4]: Conter Control Register */ - printk("s526: GPCT_INSN_CONFIG: Configuring PTG\n"); + printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n"); devpriv->s526_gpct_config[subdev_channel].app = PulseTrainGeneration; @@ -735,7 +755,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, break; default: - printk("s526: unsupported GPCT_insn_config\n"); + printk(KERN_ERR "s526: unsupported GPCT_insn_config\n"); return -EINVAL; break; } @@ -751,20 +771,21 @@ static int s526_gpct_winsn(struct comedi_device *dev, short value; union cmReg cmReg; - printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel); + printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n", + subdev_channel); cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel)); - printk("s526: Counter Mode Register: %x\n", cmReg.value); + printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value); /* Check what Application of Counter this channel is configured for */ switch (devpriv->s526_gpct_config[subdev_channel].app) { case PositionMeasurement: - printk("S526: INSN_WRITE: PM\n"); + printk(KERN_INFO "S526: INSN_WRITE: PM\n"); outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel)); break; case SinglePulseGeneration: - printk("S526: INSN_WRITE: SPG\n"); + printk(KERN_INFO "S526: INSN_WRITE: SPG\n"); outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel)); @@ -777,14 +798,14 @@ static int s526_gpct_winsn(struct comedi_device *dev, The above periods must be expressed as a multiple of the pulse frequency on the selected source */ - printk("S526: INSN_WRITE: PTG\n"); + printk(KERN_INFO "S526: INSN_WRITE: PTG\n"); if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) { (devpriv->s526_gpct_config[subdev_channel]).data[0] = insn->data[0]; (devpriv->s526_gpct_config[subdev_channel]).data[1] = insn->data[1]; } else { - printk("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n", + printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n", insn->data[0], insn->data[1]); return -EINVAL; } @@ -873,7 +894,7 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, if (i == TIMEOUT) { /* printk() should be used instead of printk() * whenever the code can be called from real-time. */ - printk("s526: ADC(0x%04x) timeout\n", + printk(KERN_ERR "s526: ADC(0x%04x) timeout\n", inw(ADDR_REG(REG_ISR))); return -ETIMEDOUT; } @@ -906,11 +927,14 @@ static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, * very useful, but that's how the interface is defined. */ for (i = 0; i < insn->n; i++) { /* a typical programming sequence */ -/* outw(data[i], dev->iobase + REG_ADD); write the data to preload register */ - outw(data[i], ADDR_REG(REG_ADD)); /* write the data to preload register */ + /* write the data to preload register + * outw(data[i], dev->iobase + REG_ADD); + */ + /* write the data to preload register */ + outw(data[i], ADDR_REG(REG_ADD)); devpriv->ao_readback[chan] = data[i]; /* outw(val + 1, dev->iobase + REG_DAC); starts the D/A conversion. */ - outw(val + 1, ADDR_REG(REG_DAC)); /* starts the D/A conversion. */ + outw(val + 1, ADDR_REG(REG_DAC)); /*starts the D/A conversion.*/ } /* return the number of samples read/written */ @@ -954,7 +978,7 @@ static int s526_dio_insn_bits(struct comedi_device *dev, /* on return, data[1] contains the value of the digital * input and output lines. */ - data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */ + data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */ /* or we could just return the software copy of the output values if * it was a purely digital output subdevice */ /* data[1]=s->state & 0xFF; */ @@ -969,7 +993,7 @@ static int s526_dio_insn_config(struct comedi_device *dev, int chan = CR_CHAN(insn->chanspec); int group, mask; - printk("S526 DIO insn_config\n"); + printk(KERN_INFO "S526 DIO insn_config\n"); /* The input or output configuration of each digital line is * configured by a special insn_config instruction. chanspec @@ -980,11 +1004,12 @@ static int s526_dio_insn_config(struct comedi_device *dev, mask = 0xF << (group << 2); switch (data[0]) { case INSN_CONFIG_DIO_OUTPUT: - s->state |= 1 << (group + 10); // bit 10/11 set the group 1/2's mode + /* bit 10/11 set the group 1/2's mode */ + s->state |= 1 << (group + 10); s->io_bits |= mask; break; case INSN_CONFIG_DIO_INPUT: - s->state &= ~(1 << (group + 10));// 1 is output, 0 is input. + s->state &= ~(1 << (group + 10)); /* 1 is output, 0 is input. */ s->io_bits &= ~mask; break; case INSN_CONFIG_DIO_QUERY: -- cgit v1.1