From b750106bafbf9e8cb888a2b3681f444d8183a296 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 4 Apr 2011 11:38:07 +0200 Subject: Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9. SAM-BA devices identify themselves CDC-ACM devices and should be using the cdc-acm driver. Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo modem without AT command capabilities) cdc-acm also binds to them. Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be able to select the device. This is simply a UI-issue that should be fixed by Atmel. Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold Cc: Sven Köhler Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Makefile | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb/serial/Makefile') diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 9a2117f..9e536ee 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -48,7 +48,6 @@ obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o -obj-$(CONFIG_USB_SERIAL_SAMBA) += sam-ba.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o -- cgit v1.1