From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/video/amba-clcd.c | 533 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 533 insertions(+) create mode 100644 drivers/video/amba-clcd.c (limited to 'drivers/video/amba-clcd.c') diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c new file mode 100644 index 0000000..acdba0c --- /dev/null +++ b/drivers/video/amba-clcd.c @@ -0,0 +1,533 @@ +/* + * linux/drivers/video/amba-clcd.c + * + * Copyright (C) 2001 ARM Limited, by David A Rusling + * Updated to 2.5, Deep Blue Solutions Ltd. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * ARM PrimeCell PL110 Color LCD Controller + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define to_clcd(info) container_of(info, struct clcd_fb, fb) + +/* This is limited to 16 characters when displayed by X startup */ +static const char *clcd_name = "CLCD FB"; + +/* + * Unfortunately, the enable/disable functions may be called either from + * process or IRQ context, and we _need_ to delay. This is _not_ good. + */ +static inline void clcdfb_sleep(unsigned int ms) +{ + if (in_atomic()) { + mdelay(ms); + } else { + msleep(ms); + } +} + +static inline void clcdfb_set_start(struct clcd_fb *fb) +{ + unsigned long ustart = fb->fb.fix.smem_start; + unsigned long lstart; + + ustart += fb->fb.var.yoffset * fb->fb.fix.line_length; + lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2; + + writel(ustart, fb->regs + CLCD_UBAS); + writel(lstart, fb->regs + CLCD_LBAS); +} + +static void clcdfb_disable(struct clcd_fb *fb) +{ + u32 val; + + if (fb->board->disable) + fb->board->disable(fb); + + val = readl(fb->regs + CLCD_CNTL); + if (val & CNTL_LCDPWR) { + val &= ~CNTL_LCDPWR; + writel(val, fb->regs + CLCD_CNTL); + + clcdfb_sleep(20); + } + if (val & CNTL_LCDEN) { + val &= ~CNTL_LCDEN; + writel(val, fb->regs + CLCD_CNTL); + } + + /* + * Disable CLCD clock source. + */ + clk_disable(fb->clk); +} + +static void clcdfb_enable(struct clcd_fb *fb, u32 cntl) +{ + /* + * Enable the CLCD clock source. + */ + clk_enable(fb->clk); + + /* + * Bring up by first enabling.. + */ + cntl |= CNTL_LCDEN; + writel(cntl, fb->regs + CLCD_CNTL); + + clcdfb_sleep(20); + + /* + * and now apply power. + */ + cntl |= CNTL_LCDPWR; + writel(cntl, fb->regs + CLCD_CNTL); + + /* + * finally, enable the interface. + */ + if (fb->board->enable) + fb->board->enable(fb); +} + +static int +clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var) +{ + int ret = 0; + + memset(&var->transp, 0, sizeof(var->transp)); + memset(&var->red, 0, sizeof(var->red)); + memset(&var->green, 0, sizeof(var->green)); + memset(&var->blue, 0, sizeof(var->blue)); + + switch (var->bits_per_pixel) { + case 1: + case 2: + case 4: + case 8: + var->red.length = 8; + var->red.offset = 0; + var->green.length = 8; + var->green.offset = 0; + var->blue.length = 8; + var->blue.offset = 0; + break; + case 16: + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + if (fb->panel->cntl & CNTL_BGR) { + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + } else { + var->red.offset = 0; + var->green.offset = 5; + var->blue.offset = 10; + } + break; + case 24: + if (fb->panel->cntl & CNTL_LCDTFT) { + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + + if (fb->panel->cntl & CNTL_BGR) { + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + } else { + var->red.offset = 0; + var->green.offset = 8; + var->blue.offset = 16; + } + break; + } + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct clcd_fb *fb = to_clcd(info); + int ret = -EINVAL; + + if (fb->board->check) + ret = fb->board->check(fb, var); + if (ret == 0) + ret = clcdfb_set_bitfields(fb, var); + + return ret; +} + +static int clcdfb_set_par(struct fb_info *info) +{ + struct clcd_fb *fb = to_clcd(info); + struct clcd_regs regs; + + fb->fb.fix.line_length = fb->fb.var.xres_virtual * + fb->fb.var.bits_per_pixel / 8; + + if (fb->fb.var.bits_per_pixel <= 8) + fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + else + fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + + fb->board->decode(fb, ®s); + + clcdfb_disable(fb); + + writel(regs.tim0, fb->regs + CLCD_TIM0); + writel(regs.tim1, fb->regs + CLCD_TIM1); + writel(regs.tim2, fb->regs + CLCD_TIM2); + writel(regs.tim3, fb->regs + CLCD_TIM3); + + clcdfb_set_start(fb); + + clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000); + + fb->clcd_cntl = regs.cntl; + + clcdfb_enable(fb, regs.cntl); + +#ifdef DEBUG + printk(KERN_INFO "CLCD: Registers set to\n" + KERN_INFO " %08x %08x %08x %08x\n" + KERN_INFO " %08x %08x %08x %08x\n", + readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1), + readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3), + readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS), + readl(fb->regs + CLCD_IENB), readl(fb->regs + CLCD_CNTL)); +#endif + + return 0; +} + +static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) +{ + unsigned int mask = (1 << bf->length) - 1; + + return (val >> (16 - bf->length) & mask) << bf->offset; +} + +/* + * Set a single color register. The values supplied have a 16 bit + * magnitude. Return != 0 for invalid regno. + */ +static int +clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int transp, struct fb_info *info) +{ + struct clcd_fb *fb = to_clcd(info); + + if (regno < 16) + fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | + convert_bitfield(blue, &fb->fb.var.blue) | + convert_bitfield(green, &fb->fb.var.green) | + convert_bitfield(red, &fb->fb.var.red); + + if (fb->fb.var.bits_per_pixel == 8 && regno < 256) { + int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3); + u32 val, mask, newval; + + newval = (red >> 11) & 0x001f; + newval |= (green >> 6) & 0x03e0; + newval |= (blue >> 1) & 0x7c00; + + /* + * 3.2.11: if we're configured for big endian + * byte order, the palette entries are swapped. + */ + if (fb->clcd_cntl & CNTL_BEBO) + regno ^= 1; + + if (regno & 1) { + newval <<= 16; + mask = 0x0000ffff; + } else { + mask = 0xffff0000; + } + + val = readl(fb->regs + hw_reg) & mask; + writel(val | newval, fb->regs + hw_reg); + } + + return regno > 255; +} + +/* + * Blank the screen if blank_mode != 0, else unblank. If blank == NULL + * then the caller blanks by setting the CLUT (Color Look Up Table) to all + * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due + * to e.g. a video mode which doesn't support it. Implements VESA suspend + * and powerdown modes on hardware that supports disabling hsync/vsync: + * blank_mode == 2: suspend vsync + * blank_mode == 3: suspend hsync + * blank_mode == 4: powerdown + */ +static int clcdfb_blank(int blank_mode, struct fb_info *info) +{ + struct clcd_fb *fb = to_clcd(info); + + if (blank_mode != 0) { + clcdfb_disable(fb); + } else { + clcdfb_enable(fb, fb->clcd_cntl); + } + return 0; +} + +static int clcdfb_mmap(struct fb_info *info, struct file *file, + struct vm_area_struct *vma) +{ + struct clcd_fb *fb = to_clcd(info); + unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT; + int ret = -EINVAL; + + len = info->fix.smem_len; + + if (off <= len && vma->vm_end - vma->vm_start <= len - off && + fb->board->mmap) + ret = fb->board->mmap(fb, vma); + + return ret; +} + +static struct fb_ops clcdfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = clcdfb_check_var, + .fb_set_par = clcdfb_set_par, + .fb_setcolreg = clcdfb_setcolreg, + .fb_blank = clcdfb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = soft_cursor, + .fb_mmap = clcdfb_mmap, +}; + +static int clcdfb_register(struct clcd_fb *fb) +{ + int ret; + + fb->clk = clk_get(&fb->dev->dev, "CLCDCLK"); + if (IS_ERR(fb->clk)) { + ret = PTR_ERR(fb->clk); + goto out; + } + + ret = clk_use(fb->clk); + if (ret) + goto free_clk; + + fb->fb.fix.mmio_start = fb->dev->res.start; + fb->fb.fix.mmio_len = SZ_4K; + + fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len); + if (!fb->regs) { + printk(KERN_ERR "CLCD: unable to remap registers\n"); + ret = -ENOMEM; + goto unuse_clk; + } + + fb->fb.fbops = &clcdfb_ops; + fb->fb.flags = FBINFO_FLAG_DEFAULT; + fb->fb.pseudo_palette = fb->cmap; + + strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id)); + fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + fb->fb.fix.type_aux = 0; + fb->fb.fix.xpanstep = 0; + fb->fb.fix.ypanstep = 0; + fb->fb.fix.ywrapstep = 0; + fb->fb.fix.accel = FB_ACCEL_NONE; + + fb->fb.var.xres = fb->panel->mode.xres; + fb->fb.var.yres = fb->panel->mode.yres; + fb->fb.var.xres_virtual = fb->panel->mode.xres; + fb->fb.var.yres_virtual = fb->panel->mode.yres; + fb->fb.var.bits_per_pixel = fb->panel->bpp; + fb->fb.var.grayscale = fb->panel->grayscale; + fb->fb.var.pixclock = fb->panel->mode.pixclock; + fb->fb.var.left_margin = fb->panel->mode.left_margin; + fb->fb.var.right_margin = fb->panel->mode.right_margin; + fb->fb.var.upper_margin = fb->panel->mode.upper_margin; + fb->fb.var.lower_margin = fb->panel->mode.lower_margin; + fb->fb.var.hsync_len = fb->panel->mode.hsync_len; + fb->fb.var.vsync_len = fb->panel->mode.vsync_len; + fb->fb.var.sync = fb->panel->mode.sync; + fb->fb.var.vmode = fb->panel->mode.vmode; + fb->fb.var.activate = FB_ACTIVATE_NOW; + fb->fb.var.nonstd = 0; + fb->fb.var.height = fb->panel->height; + fb->fb.var.width = fb->panel->width; + fb->fb.var.accel_flags = 0; + + fb->fb.monspecs.hfmin = 0; + fb->fb.monspecs.hfmax = 100000; + fb->fb.monspecs.vfmin = 0; + fb->fb.monspecs.vfmax = 400; + fb->fb.monspecs.dclkmin = 1000000; + fb->fb.monspecs.dclkmax = 100000000; + + /* + * Make sure that the bitfields are set appropriately. + */ + clcdfb_set_bitfields(fb, &fb->fb.var); + + /* + * Allocate colourmap. + */ + fb_alloc_cmap(&fb->fb.cmap, 256, 0); + + /* + * Ensure interrupts are disabled. + */ + writel(0, fb->regs + CLCD_IENB); + + fb_set_var(&fb->fb, &fb->fb.var); + + printk(KERN_INFO "CLCD: %s hardware, %s display\n", + fb->board->name, fb->panel->mode.name); + + ret = register_framebuffer(&fb->fb); + if (ret == 0) + goto out; + + printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret); + + iounmap(fb->regs); + unuse_clk: + clk_unuse(fb->clk); + free_clk: + clk_put(fb->clk); + out: + return ret; +} + +static int clcdfb_probe(struct amba_device *dev, void *id) +{ + struct clcd_board *board = dev->dev.platform_data; + struct clcd_fb *fb; + int ret; + + if (!board) + return -EINVAL; + + ret = amba_request_regions(dev, NULL); + if (ret) { + printk(KERN_ERR "CLCD: unable to reserve regs region\n"); + goto out; + } + + fb = (struct clcd_fb *) kmalloc(sizeof(struct clcd_fb), GFP_KERNEL); + if (!fb) { + printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n"); + ret = -ENOMEM; + goto free_region; + } + memset(fb, 0, sizeof(struct clcd_fb)); + + fb->dev = dev; + fb->board = board; + + ret = fb->board->setup(fb); + if (ret) + goto free_fb; + + ret = clcdfb_register(fb); + if (ret == 0) { + amba_set_drvdata(dev, fb); + goto out; + } + + fb->board->remove(fb); + free_fb: + kfree(fb); + free_region: + amba_release_regions(dev); + out: + return ret; +} + +static int clcdfb_remove(struct amba_device *dev) +{ + struct clcd_fb *fb = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + clcdfb_disable(fb); + unregister_framebuffer(&fb->fb); + iounmap(fb->regs); + clk_unuse(fb->clk); + clk_put(fb->clk); + + fb->board->remove(fb); + + kfree(fb); + + amba_release_regions(dev); + + return 0; +} + +static struct amba_id clcdfb_id_table[] = { + { + .id = 0x00041110, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver clcd_driver = { + .drv = { + .name = "clcd-pl110", + }, + .probe = clcdfb_probe, + .remove = clcdfb_remove, + .id_table = clcdfb_id_table, +}; + +int __init amba_clcdfb_init(void) +{ + if (fb_get_options("ambafb", NULL)) + return -ENODEV; + + return amba_driver_register(&clcd_driver); +} + +module_init(amba_clcdfb_init); + +static void __exit amba_clcdfb_exit(void) +{ + amba_driver_unregister(&clcd_driver); +} + +module_exit(amba_clcdfb_exit); + +MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver"); +MODULE_LICENSE("GPL"); -- cgit v1.1