From dec3eb01c2409ca8276c1152c167add66a37d1ba Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:51:10 -0400 Subject: Input: force feedback - make sure effect is present before playing Make sure that requested effect id is not out of range for the device and that effect is present before requesting device to play it. Reported-by: Jan Kratochvil Signed-off-by: Dmitry Torokhov --- drivers/input/ff-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 783b341..eebc724 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -281,7 +281,8 @@ int input_ff_event(struct input_dev *dev, unsigned int type, break; default: - ff->playback(dev, code, value); + if (check_effect_access(ff, code, NULL) == 0) + ff->playback(dev, code, value); break; } -- cgit v1.1 From 78167236e23bb3c80d2b35b693e578a6e56b1171 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:52:51 -0400 Subject: Input: drivers/joystick - fix various sparse warnings Fix various issues pointed by sparse: - module_param_array_named() takes unsigned int as number of parameters argument - shadowing of global variables is not healthy. I think there was once a bug in db9 caused by it. Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/analog.c | 2 +- drivers/input/joystick/db9.c | 18 +++++++++--------- drivers/input/joystick/gamecon.c | 17 +++++++++-------- drivers/input/joystick/iforce/iforce.h | 2 +- drivers/input/joystick/turbografx.c | 18 ++++++++++-------- 5 files changed, 30 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 1c1afb5..bdd157c 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL"); #define ANALOG_PORTS 16 static char *js[ANALOG_PORTS]; -static int js_nargs; +static unsigned int js_nargs; static int analog_options[ANALOG_PORTS]; module_param_array_named(map, js, charp, &js_nargs, 0); MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities"); diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index c27593b..86ad102 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -46,17 +46,17 @@ MODULE_LICENSE("GPL"); struct db9_config { int args[2]; - int nargs; + unsigned int nargs; }; #define DB9_MAX_PORTS 3 -static struct db9_config db9[DB9_MAX_PORTS] __initdata; +static struct db9_config db9_cfg[DB9_MAX_PORTS] __initdata; -module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0); +module_param_array_named(dev, db9_cfg[0].args, int, &db9_cfg[0].nargs, 0); MODULE_PARM_DESC(dev, "Describes first attached device (,)"); -module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0); +module_param_array_named(dev2, db9_cfg[1].args, int, &db9_cfg[0].nargs, 0); MODULE_PARM_DESC(dev2, "Describes second attached device (,)"); -module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0); +module_param_array_named(dev3, db9_cfg[2].args, int, &db9_cfg[2].nargs, 0); MODULE_PARM_DESC(dev3, "Describes third attached device (,)"); #define DB9_ARG_PARPORT 0 @@ -680,17 +680,17 @@ static int __init db9_init(void) int err = 0; for (i = 0; i < DB9_MAX_PORTS; i++) { - if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0) + if (db9_cfg[i].nargs == 0 || db9_cfg[i].args[DB9_ARG_PARPORT] < 0) continue; - if (db9[i].nargs < 2) { + if (db9_cfg[i].nargs < 2) { printk(KERN_ERR "db9.c: Device type must be specified.\n"); err = -EINVAL; break; } - db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT], - db9[i].args[DB9_ARG_MODE]); + db9_base[i] = db9_probe(db9_cfg[i].args[DB9_ARG_PARPORT], + db9_cfg[i].args[DB9_ARG_MODE]); if (IS_ERR(db9_base[i])) { err = PTR_ERR(db9_base[i]); break; diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index c71b58f..1a452e0 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -48,16 +48,16 @@ MODULE_LICENSE("GPL"); struct gc_config { int args[GC_MAX_DEVICES + 1]; - int nargs; + unsigned int nargs; }; -static struct gc_config gc[GC_MAX_PORTS] __initdata; +static struct gc_config gc_cfg[GC_MAX_PORTS] __initdata; -module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0); +module_param_array_named(map, gc_cfg[0].args, int, &gc_cfg[0].nargs, 0); MODULE_PARM_DESC(map, "Describes first set of devices (,,,..)"); -module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0); +module_param_array_named(map2, gc_cfg[1].args, int, &gc_cfg[1].nargs, 0); MODULE_PARM_DESC(map2, "Describes second set of devices"); -module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0); +module_param_array_named(map3, gc_cfg[2].args, int, &gc_cfg[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); /* see also gs_psx_delay parameter in PSX support section */ @@ -810,16 +810,17 @@ static int __init gc_init(void) int err = 0; for (i = 0; i < GC_MAX_PORTS; i++) { - if (gc[i].nargs == 0 || gc[i].args[0] < 0) + if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0) continue; - if (gc[i].nargs < 2) { + if (gc_cfg[i].nargs < 2) { printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); err = -EINVAL; break; } - gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1); + gc_base[i] = gc_probe(gc_cfg[i].args[0], + gc_cfg[i].args + 1, gc_cfg[i].nargs - 1); if (IS_ERR(gc_base[i])) { err = PTR_ERR(gc_base[i]); break; diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index dadcf4f..40a853a 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -124,7 +124,7 @@ struct iforce { /* Buffer used for asynchronous sending of bytes to the device */ struct circ_buf xmit; unsigned char xmit_data[XMIT_SIZE]; - long xmit_flags[1]; + unsigned long xmit_flags[1]; /* Force Feedback */ wait_queue_head_t wait; diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 0f2c608..8381c6f 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -48,16 +48,16 @@ MODULE_LICENSE("GPL"); struct tgfx_config { int args[TGFX_MAX_DEVICES + 1]; - int nargs; + unsigned int nargs; }; -static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata; +static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata; -module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0); +module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0); MODULE_PARM_DESC(map, "Describes first set of devices (,,,.."); -module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0); +module_param_array_named(map2, tgfx_cfg[1].args, int, &tgfx_cfg[1].nargs, 0); MODULE_PARM_DESC(map2, "Describes second set of devices"); -module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0); +module_param_array_named(map3, tgfx_cfg[2].args, int, &tgfx_cfg[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); #define TGFX_REFRESH_TIME HZ/100 /* 10 ms */ @@ -283,16 +283,18 @@ static int __init tgfx_init(void) int err = 0; for (i = 0; i < TGFX_MAX_PORTS; i++) { - if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0) + if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0) continue; - if (tgfx[i].nargs < 2) { + if (tgfx_cfg[i].nargs < 2) { printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); err = -EINVAL; break; } - tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1); + tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0], + tgfx_cfg[i].args + 1, + tgfx_cfg[i].nargs - 1); if (IS_ERR(tgfx_base[i])) { err = PTR_ERR(tgfx_base[i]); break; -- cgit v1.1 From ce305b6a0815cae4288e77723f80fbc97f651f9a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:53:18 -0400 Subject: Input: evdev - fix some sparse warnings (signedness, shadowing) Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 6cff809..0b45d47 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -512,7 +512,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0,0))) { - long *bits; + unsigned long *bits; int len; switch (_IOC_NR(cmd) & EV_MAX) { @@ -557,7 +557,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) { - int t = _IOC_NR(cmd) & ABS_MAX; + t = _IOC_NR(cmd) & ABS_MAX; abs.value = dev->abs[t]; abs.minimum = dev->absmin[t]; @@ -577,7 +577,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { - int t = _IOC_NR(cmd) & ABS_MAX; + t = _IOC_NR(cmd) & ABS_MAX; if (copy_from_user(&abs, p, sizeof(struct input_absinfo))) return -EFAULT; -- cgit v1.1 From 4ee1fc8e554593061a71d6af7c94f31764b87606 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:54:54 -0400 Subject: Input: drivers/usb/input - fix sparse warnings (signedness) Signed-off-by: Dmitry Torokhov --- drivers/usb/input/acecad.c | 2 +- drivers/usb/input/kbtab.c | 2 +- drivers/usb/input/wacom_wac.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index be8e924..dd23104 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -54,7 +54,7 @@ struct usb_acecad { struct input_dev *input; struct urb *irq; - signed char *data; + unsigned char *data; dma_addr_t data_dma; }; diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index c4781b9..91e6d00 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -29,7 +29,7 @@ module_param(kb_pressure_click, int, 0); MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); struct kbtab { - signed char *data; + unsigned char *data; dma_addr_t data_dma; struct input_dev *dev; struct usb_device *usbdev; diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h index a230222..8979366 100644 --- a/drivers/usb/input/wacom_wac.h +++ b/drivers/usb/input/wacom_wac.h @@ -39,7 +39,7 @@ struct wacom_features { }; struct wacom_wac { - signed char *data; + unsigned char *data; int tool[2]; int id[2]; __u32 serial[2]; -- cgit v1.1 From a830df367cc8cd802b45baed2449bea267727721 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 3 May 2007 00:55:34 -0400 Subject: Input: pull input.h into uinpit.h uinput.h relies on structures found in input.h, so pull in the header Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- drivers/input/misc/uinput.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 031467e..a56ad4b 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include -- cgit v1.1 From 4bdd488f4bf7dc91b371fe160a4718b0a91bb2a4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:56:18 -0400 Subject: Input: synaptics - don't complain about failed resets On many laptops (Compaq, HP) the touchpad is so slow responding to reset that keyboard controller times out. The device is reset nonetheless and works fine. Kill the "synaptics reset failed" error; if device is not working then other parts of synaptics_query_hardware() will fail anyway. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index c77788b..666ad3a 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -185,7 +185,7 @@ static int synaptics_query_hardware(struct psmouse *psmouse) int retries = 0; while ((retries++ < 3) && psmouse_reset(psmouse)) - printk(KERN_ERR "synaptics reset failed\n"); + /* empty */; if (synaptics_identify(psmouse)) return -1; -- cgit v1.1 From e37a97d44038700ff8c2f1080f71fdfc3a4c0c1e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 00:57:29 -0400 Subject: Input: drivers/usb/input - usb_buffer_free() cleanup usb_buffer_free() now handles NULLs so remove unneeded checks form callers. Signed-off-by: Dmitry Torokhov --- drivers/usb/input/ati_remote2.c | 4 +--- drivers/usb/input/powermate.c | 10 ++++------ drivers/usb/input/usbtouchscreen.c | 5 ++--- drivers/usb/input/yealink.c | 23 +++++++++++------------ 4 files changed, 18 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c index a9032aa..1031543 100644 --- a/drivers/usb/input/ati_remote2.c +++ b/drivers/usb/input/ati_remote2.c @@ -405,9 +405,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) for (i = 0; i < 2; i++) { usb_free_urb(ar2->urb[i]); - - if (ar2->buf[i]) - usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); } } diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index 4f93a76..448a470 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -291,12 +291,10 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm) { - if (pm->data) - usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, - pm->data, pm->data_dma); - if (pm->configcr) - usb_buffer_free(udev, sizeof(*(pm->configcr)), - pm->configcr, pm->configcr_dma); + usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, + pm->data, pm->data_dma); + usb_buffer_free(udev, sizeof(*(pm->configcr)), + pm->configcr, pm->configcr_dma); } /* Called whenever a USB device matching one in our supported devices table is connected */ diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index e082941..8e18e6c 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -668,9 +668,8 @@ static void usbtouch_close(struct input_dev *input) static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) { - if (usbtouch->data) - usb_buffer_free(udev, usbtouch->type->rept_size, - usbtouch->data, usbtouch->data_dma); + usb_buffer_free(udev, usbtouch->type->rept_size, + usbtouch->data, usbtouch->data_dma); kfree(usbtouch->buffer); } diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index c54f1a5..fc645b2 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -818,18 +818,17 @@ static int usb_cleanup(struct yealink_dev *yld, int err) else input_unregister_device(yld->idev); } - if (yld->ctl_req) - usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), - yld->ctl_req, yld->ctl_req_dma); - if (yld->ctl_data) - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->ctl_data, yld->ctl_dma); - if (yld->irq_data) - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->irq_data, yld->irq_dma); - - usb_free_urb(yld->urb_irq); /* parameter validation in core/urb */ - usb_free_urb(yld->urb_ctl); /* parameter validation in core/urb */ + + usb_free_urb(yld->urb_irq); + usb_free_urb(yld->urb_ctl); + + usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), + yld->ctl_req, yld->ctl_req_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->ctl_data, yld->ctl_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->irq_data, yld->irq_dma); + kfree(yld); return err; } -- cgit v1.1 From 3f07d8796262f6aee135c8dd9a91210da9f888e4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 3 May 2007 01:02:07 -0400 Subject: Input: aaed2000_kbd - convert to use polldev library Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 1 + drivers/input/keyboard/aaed2000_kbd.c | 62 +++++++++++------------------------ 2 files changed, 21 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index e285172..cbf2abb 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -215,6 +215,7 @@ config KEYBOARD_PXA27x config KEYBOARD_AAED2000 tristate "AAED-2000 keyboard" depends on MACH_AAED2000 + select INPUT_POLLDEV default y help Say Y here to enable the keyboard on the Agilent AAED-2000 diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c index 3a37505..63d6ead 100644 --- a/drivers/input/keyboard/aaed2000_kbd.c +++ b/drivers/input/keyboard/aaed2000_kbd.c @@ -14,12 +14,11 @@ #include #include #include -#include +#include #include #include #include #include -#include #include #include @@ -46,8 +45,7 @@ static unsigned char aaedkbd_keycode[NR_SCANCODES] = { struct aaedkbd { unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)]; - struct input_dev *input; - struct work_struct workq; + struct input_polled_dev *poll_dev; int kbdscan_state[KB_COLS]; int kbdscan_count[KB_COLS]; }; @@ -64,14 +62,15 @@ static void aaedkbd_report_col(struct aaedkbd *aaedkbd, scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(aaedkbd->input, aaedkbd->keycode[scancode], pressed); + input_report_key(aaedkbd->poll_dev->input, + aaedkbd->keycode[scancode], pressed); } } /* Scan the hardware keyboard and push any changes up through the input layer */ -static void aaedkbd_work(void *data) +static void aaedkbd_poll(struct input_polled_dev *dev) { - struct aaedkbd *aaedkbd = data; + struct aaedkbd *aaedkbd = dev->private; unsigned int col, rowd; col = 0; @@ -90,51 +89,34 @@ static void aaedkbd_work(void *data) } while (col < KB_COLS); AAEC_GPIO_KSCAN = 0x07; - input_sync(aaedkbd->input); - - schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL)); -} - -static int aaedkbd_open(struct input_dev *indev) -{ - struct aaedkbd *aaedkbd = input_get_drvdata(indev); - - schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL)); - - return 0; -} - -static void aaedkbd_close(struct input_dev *indev) -{ - struct aaedkbd *aaedkbd = input_get_drvdata(indev); - - cancel_delayed_work(&aaedkbd->workq); - flush_scheduled_work(); + input_sync(dev->input); } static int __devinit aaedkbd_probe(struct platform_device *pdev) { struct aaedkbd *aaedkbd; + struct input_polled_dev *poll_dev; struct input_dev *input_dev; int i; int error; aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!aaedkbd || !input_dev) { + poll_dev = input_allocate_polled_device(); + if (!aaedkbd || !poll_dev) { error = -ENOMEM; goto fail; } platform_set_drvdata(pdev, aaedkbd); - aaedkbd->input = input_dev; - - /* Init keyboard rescan workqueue */ - INIT_WORK(&aaedkbd->workq, aaedkbd_work, aaedkbd); - + aaedkbd->poll_dev = poll_dev; memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode)); + poll_dev->private = aaedkbd; + poll_dev->poll = aaedkbd_poll; + poll_dev->poll_interval = SCAN_INTERVAL; + + input_dev = poll_dev->input; input_dev->name = "AAED-2000 Keyboard"; input_dev->phys = "aaedkbd/input0"; input_dev->id.bustype = BUS_HOST; @@ -143,8 +125,6 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev) input_dev->id.version = 0x0100; input_dev->dev.parent = &pdev->dev; - input_set_drvdata(input_dev, aaedkbd); - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); input_dev->keycode = aaedkbd->keycode; input_dev->keycodesize = sizeof(unsigned char); @@ -154,17 +134,14 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev) set_bit(aaedkbd->keycode[i], input_dev->keybit); clear_bit(0, input_dev->keybit); - input_dev->open = aaedkbd_open; - input_dev->close = aaedkbd_close; - - error = input_register_device(aaedkbd->input); + error = input_register_polled_device(aaedkbd->poll_dev); if (error) goto fail; return 0; fail: kfree(aaedkbd); - input_free_device(input_dev); + input_free_polled_device(poll_dev); return error; } @@ -172,7 +149,8 @@ static int __devexit aaedkbd_remove(struct platform_device *pdev) { struct aaedkbd *aaedkbd = platform_get_drvdata(pdev); - input_unregister_device(aaedkbd->input); + input_unregister_polled_device(aaedkbd->poll_dev); + input_free_polled_device(aaedkbd->poll_dev); kfree(aaedkbd); return 0; -- cgit v1.1 From d2ada5597d33a9108acb2caf912f85cbc9caab1e Mon Sep 17 00:00:00 2001 From: Roland Scheidegger Date: Tue, 8 May 2007 01:31:40 -0400 Subject: Input: i8042 - fix AUX port detection with some chips The i8042 driver fails detection of the AUX port with some chips, because they apparently do not change the I8042_CTR_AUXDIS bit immediately. This is known to affect at least HP500/HP510 notebooks, consequently the built-in touchpad will not work. The patch will simply reread the value until it gets the expected value or a retry limit is hit, without touching other workaround code in the same area. Signed-off-by: Roland Scheidegger Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 7c17377..3888dc3 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -526,6 +526,33 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * i8042_toggle_aux - enables or disables AUX port on i8042 via command and + * verifies success by readinng CTR. Used when testing for presence of AUX + * port. + */ +static int __devinit i8042_toggle_aux(int on) +{ + unsigned char param; + int i; + + if (i8042_command(¶m, + on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE)) + return -1; + + /* some chips need some time to set the I8042_CTR_AUXDIS bit */ + for (i = 0; i < 100; i++) { + udelay(50); + + if (i8042_command(¶m, I8042_CMD_CTL_RCTR)) + return -1; + + if (!(param & I8042_CTR_AUXDIS) == on) + return 0; + } + + return -1; +} /* * i8042_check_aux() applies as much paranoia as it can at detecting @@ -580,16 +607,12 @@ static int __devinit i8042_check_aux(void) * Bit assignment test - filters out PS/2 i8042's in AT mode */ - if (i8042_command(¶m, I8042_CMD_AUX_DISABLE)) - return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) { + if (i8042_toggle_aux(0)) { printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); } - if (i8042_command(¶m, I8042_CMD_AUX_ENABLE)) - return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS)) + if (i8042_toggle_aux(1)) return -1; /* -- cgit v1.1 From 4104d13fe0194736393d97c88ee045fb689c783b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 7 May 2007 16:16:29 -0400 Subject: Input: move USB tablets under drivers/input/tablet This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman --- drivers/input/Kconfig | 2 + drivers/input/Makefile | 1 + drivers/input/tablet/Kconfig | 74 ++ drivers/input/tablet/Makefile | 12 + drivers/input/tablet/acecad.c | 289 +++++ drivers/input/tablet/aiptek.c | 2236 ++++++++++++++++++++++++++++++++++++++ drivers/input/tablet/gtco.c | 1055 ++++++++++++++++++ drivers/input/tablet/kbtab.c | 226 ++++ drivers/input/tablet/wacom.h | 131 +++ drivers/input/tablet/wacom_sys.c | 318 ++++++ drivers/input/tablet/wacom_wac.c | 675 ++++++++++++ drivers/input/tablet/wacom_wac.h | 49 + drivers/usb/Makefile | 4 - drivers/usb/input/Kconfig | 60 - drivers/usb/input/Makefile | 8 - drivers/usb/input/acecad.c | 289 ----- drivers/usb/input/aiptek.c | 2236 -------------------------------------- drivers/usb/input/gtco.c | 1055 ------------------ drivers/usb/input/kbtab.c | 226 ---- drivers/usb/input/wacom.h | 131 --- drivers/usb/input/wacom_sys.c | 318 ------ drivers/usb/input/wacom_wac.c | 675 ------------ drivers/usb/input/wacom_wac.h | 49 - 23 files changed, 5068 insertions(+), 5051 deletions(-) create mode 100644 drivers/input/tablet/Kconfig create mode 100644 drivers/input/tablet/Makefile create mode 100644 drivers/input/tablet/acecad.c create mode 100644 drivers/input/tablet/aiptek.c create mode 100644 drivers/input/tablet/gtco.c create mode 100644 drivers/input/tablet/kbtab.c create mode 100644 drivers/input/tablet/wacom.h create mode 100644 drivers/input/tablet/wacom_sys.c create mode 100644 drivers/input/tablet/wacom_wac.c create mode 100644 drivers/input/tablet/wacom_wac.h delete mode 100644 drivers/usb/input/acecad.c delete mode 100644 drivers/usb/input/aiptek.c delete mode 100644 drivers/usb/input/gtco.c delete mode 100644 drivers/usb/input/kbtab.c delete mode 100644 drivers/usb/input/wacom.h delete mode 100644 drivers/usb/input/wacom_sys.c delete mode 100644 drivers/usb/input/wacom_wac.c delete mode 100644 drivers/usb/input/wacom_wac.h (limited to 'drivers') diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 9623231..0e9b695 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -153,6 +153,8 @@ source "drivers/input/mouse/Kconfig" source "drivers/input/joystick/Kconfig" +source "drivers/input/tablet/Kconfig" + source "drivers/input/touchscreen/Kconfig" source "drivers/input/misc/Kconfig" diff --git a/drivers/input/Makefile b/drivers/input/Makefile index b4cd106..8a2dd98 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_INPUT_EVBUG) += evbug.o obj-$(CONFIG_INPUT_KEYBOARD) += keyboard/ obj-$(CONFIG_INPUT_MOUSE) += mouse/ obj-$(CONFIG_INPUT_JOYSTICK) += joystick/ +obj-$(CONFIG_INPUT_TABLET) += tablet/ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig new file mode 100644 index 0000000..12dfb0e --- /dev/null +++ b/drivers/input/tablet/Kconfig @@ -0,0 +1,74 @@ +# +# Tablet driver configuration +# +menuconfig INPUT_TABLET + bool "Tablets" + help + Say Y here, and a list of supported tablets will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_TABLET + +config TABLET_USB_ACECAD + tristate "Acecad Flair tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Acecad Flair + tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called acecad. + +config TABLET_USB_AIPTEK + tristate "Aiptek 6000U/8000U tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Aiptek 6000U + or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called aiptek. + +config TABLET_USB_GTCO + tristate "GTCO CalComp/InterWrite USB Support" + depends on USB && INPUT + help + Say Y here if you want to use the USB version of the GTCO + CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called gtco. + +config TABLET_USB_KBTAB + tristate "KB Gear JamStudio tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the KB Gear + JamStudio tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called kbtab. + +config TABLET_USB_WACOM + tristate "Wacom Intuos/Graphire tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Wacom Intuos + or Graphire tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called wacom. + +endif diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile new file mode 100644 index 0000000..ce8b9a9 --- /dev/null +++ b/drivers/input/tablet/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the tablet drivers +# + +# Multipart objects. +wacom-objs := wacom_wac.o wacom_sys.o + +obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o +obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o +obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o +obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o +obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c new file mode 100644 index 0000000..dd23104 --- /dev/null +++ b/drivers/input/tablet/acecad.c @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2001-2005 Edouard TISSERANT + * Copyright (c) 2004-2005 Stephane VOLTZ + * + * USB Acecad "Acecad Flair" tablet support + * + * Changelog: + * v3.2 - Added sysfs support + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v3.2" +#define DRIVER_DESC "USB Acecad Flair tablet driver" +#define DRIVER_LICENSE "GPL" +#define DRIVER_AUTHOR "Edouard TISSERANT " + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_ACECAD 0x0460 +#define USB_DEVICE_ID_FLAIR 0x0004 +#define USB_DEVICE_ID_302 0x0008 + +struct usb_acecad { + char name[128]; + char phys[64]; + struct usb_device *usbdev; + struct input_dev *input; + struct urb *irq; + + unsigned char *data; + dma_addr_t data_dma; +}; + +static void usb_acecad_irq(struct urb *urb) +{ + struct usb_acecad *acecad = urb->context; + unsigned char *data = acecad->data; + struct input_dev *dev = acecad->input; + int prox, status; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto resubmit; + } + + prox = (data[0] & 0x04) >> 2; + input_report_key(dev, BTN_TOOL_PEN, prox); + + if (prox) { + int x = data[1] | (data[2] << 8); + int y = data[3] | (data[4] << 8); + /* Pressure should compute the same way for flair and 302 */ + int pressure = data[5] | (data[6] << 8); + int touch = data[0] & 0x01; + int stylus = (data[0] & 0x10) >> 4; + int stylus2 = (data[0] & 0x20) >> 5; + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_report_abs(dev, ABS_PRESSURE, pressure); + input_report_key(dev, BTN_TOUCH, touch); + input_report_key(dev, BTN_STYLUS, stylus); + input_report_key(dev, BTN_STYLUS2, stylus2); + } + + /* event termination */ + input_sync(dev); + +resubmit: + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) + err("can't resubmit intr, %s-%s/input0, status %d", + acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status); +} + +static int usb_acecad_open(struct input_dev *dev) +{ + struct usb_acecad *acecad = input_get_drvdata(dev); + + acecad->irq->dev = acecad->usbdev; + if (usb_submit_urb(acecad->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void usb_acecad_close(struct input_dev *dev) +{ + struct usb_acecad *acecad = input_get_drvdata(dev); + + usb_kill_urb(acecad->irq); +} + +static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; + struct usb_endpoint_descriptor *endpoint; + struct usb_acecad *acecad; + struct input_dev *input_dev; + int pipe, maxp; + int err = -ENOMEM; + + if (interface->desc.bNumEndpoints != 1) + return -ENODEV; + + endpoint = &interface->endpoint[0].desc; + + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; + + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!acecad || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma); + if (!acecad->data) { + err= -ENOMEM; + goto fail1; + } + + acecad->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!acecad->irq) { + err = -ENOMEM; + goto fail2; + } + + acecad->usbdev = dev; + acecad->input = input_dev; + + if (dev->manufacturer) + strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(acecad->name, " ", sizeof(acecad->name)); + strlcat(acecad->name, dev->product, sizeof(acecad->name)); + } + + usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); + strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); + + input_dev->name = acecad->name; + input_dev->phys = acecad->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, acecad); + + input_dev->open = usb_acecad_open; + input_dev->close = usb_acecad_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); + + switch (id->driver_info) { + case 0: + input_dev->absmax[ABS_X] = 5000; + input_dev->absmax[ABS_Y] = 3750; + input_dev->absmax[ABS_PRESSURE] = 512; + if (!strlen(acecad->name)) + snprintf(acecad->name, sizeof(acecad->name), + "USB Acecad Flair Tablet %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + break; + case 1: + input_dev->absmax[ABS_X] = 3000; + input_dev->absmax[ABS_Y] = 2250; + input_dev->absmax[ABS_PRESSURE] = 1024; + if (!strlen(acecad->name)) + snprintf(acecad->name, sizeof(acecad->name), + "USB Acecad 302 Tablet %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + break; + } + + input_dev->absfuzz[ABS_X] = 4; + input_dev->absfuzz[ABS_Y] = 4; + + usb_fill_int_urb(acecad->irq, dev, pipe, + acecad->data, maxp > 8 ? 8 : maxp, + usb_acecad_irq, acecad, endpoint->bInterval); + acecad->irq->transfer_dma = acecad->data_dma; + acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + err = input_register_device(acecad->input); + if (err) + goto fail2; + + usb_set_intfdata(intf, acecad); + + return 0; + + fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma); + fail1: input_free_device(input_dev); + kfree(acecad); + return err; +} + +static void usb_acecad_disconnect(struct usb_interface *intf) +{ + struct usb_acecad *acecad = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + if (acecad) { + usb_kill_urb(acecad->irq); + input_unregister_device(acecad->input); + usb_free_urb(acecad->irq); + usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma); + kfree(acecad); + } +} + +static struct usb_device_id usb_acecad_id_table [] = { + { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 }, + { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 }, + { } +}; + +MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); + +static struct usb_driver usb_acecad_driver = { + .name = "usb_acecad", + .probe = usb_acecad_probe, + .disconnect = usb_acecad_disconnect, + .id_table = usb_acecad_id_table, +}; + +static int __init usb_acecad_init(void) +{ + int result = usb_register(&usb_acecad_driver); + if (result == 0) + info(DRIVER_VERSION ":" DRIVER_DESC); + return result; +} + +static void __exit usb_acecad_exit(void) +{ + usb_deregister(&usb_acecad_driver); +} + +module_init(usb_acecad_init); +module_exit(usb_acecad_exit); diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c new file mode 100644 index 0000000..cc0a498 --- /dev/null +++ b/drivers/input/tablet/aiptek.c @@ -0,0 +1,2236 @@ +/* + * Native support for the Aiptek HyperPen USB Tablets + * (4000U/5000U/6000U/8000U/12000U) + * + * Copyright (c) 2001 Chris Atenasio + * Copyright (c) 2002-2004 Bryan W. Headley + * + * based on wacom.c by + * Vojtech Pavlik + * Andreas Bach Aaen + * Clifford Wolf + * Sam Mosel + * James E. Blair + * Daniel Egger + * + * Many thanks to Oliver Kuechemann for his support. + * + * ChangeLog: + * v0.1 - Initial release + * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley) + * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002) + * Released to Linux 2.4.19 and 2.5.x + * v0.4 - Rewrote substantial portions of the code to deal with + * corrected control sequences, timing, dynamic configuration, + * support of 6000U - 12000U, procfs, and macro key support + * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley) + * v1.0 - Added support for diagnostic messages, count of messages + * received from URB - Mar-8-2003, Bryan W. Headley + * v1.1 - added support for tablet resolution, changed DV and proximity + * some corrections - Jun-22-2003, martin schneebacher + * - Added support for the sysfs interface, deprecating the + * procfs interface for 2.5.x kernel. Also added support for + * Wheel command. Bryan W. Headley July-15-2003. + * v1.2 - Reworked jitter timer as a kernel thread. + * Bryan W. Headley November-28-2003/Jan-10-2004. + * v1.3 - Repaired issue of kernel thread going nuts on single-processor + * machines, introduced programmableDelay as a command line + * parameter. Feb 7 2004, Bryan W. Headley. + * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of + * Rene van Paassen. Added reporting of physical pointer device + * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know + * for reports 1, 6.) + * what physical device reports for reports 1, 6.) Also enabled + * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser". + * Feb 20, 2004, Bryan W. Headley. + * v1.5 - Added previousJitterable, so we don't do jitter delay when the + * user is holding a button down for periods of time. + * + * NOTE: + * This kernel driver is augmented by the "Aiptek" XFree86 input + * driver for your X server, as well as the Gaiptek GUI Front-end + * "Tablet Manager". + * These three products are highly interactive with one another, + * so therefore it's easier to document them all as one subsystem. + * Please visit the project's "home page", located at, + * http://aiptektablet.sourceforge.net. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.5 (May-15-2004)" +#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio" +#define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" + +/* + * Aiptek status packet: + * + * (returned as Report 1 - relative coordinates from mouse and stylus) + * + * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 + * byte0 0 0 0 0 0 0 0 1 + * byte1 0 0 0 0 0 BS2 BS Tip + * byte2 X7 X6 X5 X4 X3 X2 X1 X0 + * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + * + * (returned as Report 2 - absolute coordinates from the stylus) + * + * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 + * byte0 0 0 0 0 0 0 1 0 + * byte1 X7 X6 X5 X4 X3 X2 X1 X0 + * byte2 X15 X14 X13 X12 X11 X10 X9 X8 + * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 + * byte5 * * * BS2 BS1 Tip IR DV + * byte6 P7 P6 P5 P4 P3 P2 P1 P0 + * byte7 P15 P14 P13 P12 P11 P10 P9 P8 + * + * (returned as Report 3 - absolute coordinates from the mouse) + * + * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 + * byte0 0 0 0 0 0 0 1 0 + * byte1 X7 X6 X5 X4 X3 X2 X1 X0 + * byte2 X15 X14 X13 X12 X11 X10 X9 X8 + * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 + * byte5 * * * BS2 BS1 Tip IR DV + * byte6 P7 P6 P5 P4 P3 P2 P1 P0 + * byte7 P15 P14 P13 P12 P11 P10 P9 P8 + * + * (returned as Report 4 - macrokeys from the stylus) + * + * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 + * byte0 0 0 0 0 0 1 0 0 + * byte1 0 0 0 BS2 BS Tip IR DV + * byte2 0 0 0 0 0 0 1 0 + * byte3 0 0 0 K4 K3 K2 K1 K0 + * byte4 P7 P6 P5 P4 P3 P2 P1 P0 + * byte5 P15 P14 P13 P12 P11 P10 P9 P8 + * + * (returned as Report 5 - macrokeys from the mouse) + * + * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 + * byte0 0 0 0 0 0 1 0 0 + * byte1 0 0 0 BS2 BS Tip IR DV + * byte2 0 0 0 0 0 0 1 0 + * byte3 0 0 0 K4 K3 K2 K1 K0 + * byte4 P7 P6 P5 P4 P3 P2 P1 P0 + * byte5 P15 P14 P13 P12 P11 P10 P9 P8 + * + * IR: In Range = Proximity on + * DV = Data Valid + * BS = Barrel Switch (as in, macro keys) + * BS2 also referred to as Tablet Pick + * + * Command Summary: + * + * Use report_type CONTROL (3) + * Use report_id 2 + * + * Command/Data Description Return Bytes Return Value + * 0x10/0x00 SwitchToMouse 0 + * 0x10/0x01 SwitchToTablet 0 + * 0x18/0x04 SetResolution 0 + * 0x12/0xFF AutoGainOn 0 + * 0x17/0x00 FilterOn 0 + * 0x01/0x00 GetXExtension 2 MaxX + * 0x01/0x01 GetYExtension 2 MaxY + * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE + * 0x03/0x00 GetODMCode 2 ODMCode + * 0x08/0x00 GetPressureLevels 2 =512 + * 0x04/0x00 GetFirmwareVersion 2 Firmware Version + * 0x11/0x02 EnableMacroKeys 0 + * + * To initialize the tablet: + * + * (1) Send Resolution500LPI (Command) + * (2) Query for Model code (Option Report) + * (3) Query for ODM code (Option Report) + * (4) Query for firmware (Option Report) + * (5) Query for GetXExtension (Option Report) + * (6) Query for GetYExtension (Option Report) + * (7) Query for GetPressureLevels (Option Report) + * (8) SwitchToTablet for Absolute coordinates, or + * SwitchToMouse for Relative coordinates (Command) + * (9) EnableMacroKeys (Command) + * (10) FilterOn (Command) + * (11) AutoGainOn (Command) + * + * (Step 9 can be omitted, but you'll then have no function keys.) + */ + +#define USB_VENDOR_ID_AIPTEK 0x08ca +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_SET_REPORT 0x09 + + /* PointerMode codes + */ +#define AIPTEK_POINTER_ONLY_MOUSE_MODE 0 +#define AIPTEK_POINTER_ONLY_STYLUS_MODE 1 +#define AIPTEK_POINTER_EITHER_MODE 2 + +#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \ + (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \ + a == AIPTEK_POINTER_EITHER_MODE) +#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \ + (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \ + a == AIPTEK_POINTER_EITHER_MODE) + + /* CoordinateMode code + */ +#define AIPTEK_COORDINATE_RELATIVE_MODE 0 +#define AIPTEK_COORDINATE_ABSOLUTE_MODE 1 + + /* XTilt and YTilt values + */ +#define AIPTEK_TILT_MIN (-128) +#define AIPTEK_TILT_MAX 127 +#define AIPTEK_TILT_DISABLE (-10101) + + /* Wheel values + */ +#define AIPTEK_WHEEL_MIN 0 +#define AIPTEK_WHEEL_MAX 1024 +#define AIPTEK_WHEEL_DISABLE (-10101) + + /* ToolCode values, which BTW are 0x140 .. 0x14f + * We have things set up such that if TOOL_BUTTON_FIRED_BIT is + * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx. + * + * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will + * get reset. + */ +#define TOOL_BUTTON(x) ((x) & 0x14f) +#define TOOL_BUTTON_FIRED(x) ((x) & 0x200) +#define TOOL_BUTTON_FIRED_BIT 0x200 + /* toolMode codes + */ +#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN +#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN +#define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL +#define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH +#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH +#define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER +#define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE +#define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS + + /* Diagnostic message codes + */ +#define AIPTEK_DIAGNOSTIC_NA 0 +#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1 +#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2 +#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3 + + /* Time to wait (in ms) to help mask hand jittering + * when pressing the stylus buttons. + */ +#define AIPTEK_JITTER_DELAY_DEFAULT 50 + + /* Time to wait (in ms) in-between sending the tablet + * a command and beginning the process of reading the return + * sequence from the tablet. + */ +#define AIPTEK_PROGRAMMABLE_DELAY_25 25 +#define AIPTEK_PROGRAMMABLE_DELAY_50 50 +#define AIPTEK_PROGRAMMABLE_DELAY_100 100 +#define AIPTEK_PROGRAMMABLE_DELAY_200 200 +#define AIPTEK_PROGRAMMABLE_DELAY_300 300 +#define AIPTEK_PROGRAMMABLE_DELAY_400 400 +#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400 + + /* Mouse button programming + */ +#define AIPTEK_MOUSE_LEFT_BUTTON 0x01 +#define AIPTEK_MOUSE_RIGHT_BUTTON 0x02 +#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04 + + /* Stylus button programming + */ +#define AIPTEK_STYLUS_LOWER_BUTTON 0x08 +#define AIPTEK_STYLUS_UPPER_BUTTON 0x10 + + /* Length of incoming packet from the tablet + */ +#define AIPTEK_PACKET_LENGTH 8 + + /* We report in EV_MISC both the proximity and + * whether the report came from the stylus, tablet mouse + * or "unknown" -- Unknown when the tablet is in relative + * mode, because we only get report 1's. + */ +#define AIPTEK_REPORT_TOOL_UNKNOWN 0x10 +#define AIPTEK_REPORT_TOOL_STYLUS 0x20 +#define AIPTEK_REPORT_TOOL_MOUSE 0x40 + +static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT; +static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT; + +struct aiptek_features { + int odmCode; /* Tablet manufacturer code */ + int modelCode; /* Tablet model code (not unique) */ + int firmwareCode; /* prom/eeprom version */ + char usbPath[64 + 1]; /* device's physical usb path */ + char inputPath[64 + 1]; /* input device path */ +}; + +struct aiptek_settings { + int pointerMode; /* stylus-, mouse-only or either */ + int coordinateMode; /* absolute/relative coords */ + int toolMode; /* pen, pencil, brush, etc. tool */ + int xTilt; /* synthetic xTilt amount */ + int yTilt; /* synthetic yTilt amount */ + int wheel; /* synthetic wheel amount */ + int stylusButtonUpper; /* stylus upper btn delivers... */ + int stylusButtonLower; /* stylus lower btn delivers... */ + int mouseButtonLeft; /* mouse left btn delivers... */ + int mouseButtonMiddle; /* mouse middle btn delivers... */ + int mouseButtonRight; /* mouse right btn delivers... */ + int programmableDelay; /* delay for tablet programming */ + int jitterDelay; /* delay for hand jittering */ +}; + +struct aiptek { + struct input_dev *inputdev; /* input device struct */ + struct usb_device *usbdev; /* usb device struct */ + struct urb *urb; /* urb for incoming reports */ + dma_addr_t data_dma; /* our dma stuffage */ + struct aiptek_features features; /* tablet's array of features */ + struct aiptek_settings curSetting; /* tablet's current programmable */ + struct aiptek_settings newSetting; /* ... and new param settings */ + unsigned int ifnum; /* interface number for IO */ + int diagnostic; /* tablet diagnostic codes */ + unsigned long eventCount; /* event count */ + int inDelay; /* jitter: in jitter delay? */ + unsigned long endDelay; /* jitter: time when delay ends */ + int previousJitterable; /* jitterable prev value */ + unsigned char *data; /* incoming packet data */ +}; + +/* + * Permit easy lookup of keyboard events to send, versus + * the bitmap which comes from the tablet. This hides the + * issue that the F_keys are not sequentially numbered. + */ +static const int macroKeyEvents[] = { + KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, + KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, + KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, + KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, + KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO, + KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0 +}; + +/*********************************************************************** + * Relative reports deliver values in 2's complement format to + * deal with negative offsets. + */ +static int aiptek_convert_from_2s_complement(unsigned char c) +{ + int ret; + unsigned char b = c; + int negate = 0; + + if ((b & 0x80) != 0) { + b = ~b; + b--; + negate = 1; + } + ret = b; + ret = (negate == 1) ? -ret : ret; + return ret; +} + +/*********************************************************************** + * aiptek_irq can receive one of six potential reports. + * The documentation for each is in the body of the function. + * + * The tablet reports on several attributes per invocation of + * aiptek_irq. Because the Linux Input Event system allows the + * transmission of ONE attribute per input_report_xxx() call, + * collation has to be done on the other end to reconstitute + * a complete tablet report. Further, the number of Input Event reports + * submitted varies, depending on what USB report type, and circumstance. + * To deal with this, EV_MSC is used to indicate an 'end-of-report' + * message. This has been an undocumented convention understood by the kernel + * tablet driver and clients such as gpm and XFree86's tablet drivers. + * + * Of the information received from the tablet, the one piece I + * cannot transmit is the proximity bit (without resorting to an EV_MSC + * convention above.) I therefore have taken over REL_MISC and ABS_MISC + * (for relative and absolute reports, respectively) for communicating + * Proximity. Why two events? I thought it interesting to know if the + * Proximity event occurred while the tablet was in absolute or relative + * mode. + * + * Other tablets use the notion of a certain minimum stylus pressure + * to infer proximity. While that could have been done, that is yet + * another 'by convention' behavior, the documentation for which + * would be spread between two (or more) pieces of software. + * + * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and + * replaced with the input_sync() method (which emits EV_SYN.) + */ + +static void aiptek_irq(struct urb *urb) +{ + struct aiptek *aiptek = urb->context; + unsigned char *data = aiptek->data; + struct input_dev *inputdev = aiptek->inputdev; + int jitterable = 0; + int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; + + switch (urb->status) { + case 0: + /* Success */ + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + /* See if we are in a delay loop -- throw out report if true. + */ + if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) { + goto exit; + } + + aiptek->inDelay = 0; + aiptek->eventCount++; + + /* Report 1 delivers relative coordinates with either a stylus + * or the mouse. You do not know, however, which input + * tool generated the event. + */ + if (data[0] == 1) { + if (aiptek->curSetting.coordinateMode == + AIPTEK_COORDINATE_ABSOLUTE_MODE) { + aiptek->diagnostic = + AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; + } else { + x = aiptek_convert_from_2s_complement(data[2]); + y = aiptek_convert_from_2s_complement(data[3]); + + /* jitterable keeps track of whether any button has been pressed. + * We're also using it to remap the physical mouse button mask + * to pseudo-settings. (We don't specifically care about it's + * value after moving/transposing mouse button bitmasks, except + * that a non-zero value indicates that one or more + * mouse button was pressed.) + */ + jitterable = data[5] & 0x07; + + left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; + right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; + middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; + + input_report_key(inputdev, BTN_LEFT, left); + input_report_key(inputdev, BTN_MIDDLE, middle); + input_report_key(inputdev, BTN_RIGHT, right); + input_report_rel(inputdev, REL_X, x); + input_report_rel(inputdev, REL_Y, y); + input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN); + + /* Wheel support is in the form of a single-event + * firing. + */ + if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { + input_report_rel(inputdev, REL_WHEEL, + aiptek->curSetting.wheel); + aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; + } + input_sync(inputdev); + } + } + /* Report 2 is delivered only by the stylus, and delivers + * absolute coordinates. + */ + else if (data[0] == 2) { + if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { + aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; + } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE + (aiptek->curSetting.pointerMode)) { + aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; + } else { + x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); + y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); + z = le16_to_cpu(get_unaligned((__le16 *) (data + 6))); + + p = (data[5] & 0x01) != 0 ? 1 : 0; + dv = (data[5] & 0x02) != 0 ? 1 : 0; + tip = (data[5] & 0x04) != 0 ? 1 : 0; + + /* Use jitterable to re-arrange button masks + */ + jitterable = data[5] & 0x18; + + bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; + pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; + + /* dv indicates 'data valid' (e.g., the tablet is in sync + * and has delivered a "correct" report) We will ignore + * all 'bad' reports... + */ + if (dv != 0) { + /* If we've not already sent a tool_button_?? code, do + * so now. Then set FIRED_BIT so it won't be resent unless + * the user forces FIRED_BIT off. + */ + if (TOOL_BUTTON_FIRED + (aiptek->curSetting.toolMode) == 0) { + input_report_key(inputdev, + TOOL_BUTTON(aiptek->curSetting.toolMode), + 1); + aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + } + + if (p != 0) { + input_report_abs(inputdev, ABS_X, x); + input_report_abs(inputdev, ABS_Y, y); + input_report_abs(inputdev, ABS_PRESSURE, z); + + input_report_key(inputdev, BTN_TOUCH, tip); + input_report_key(inputdev, BTN_STYLUS, bs); + input_report_key(inputdev, BTN_STYLUS2, pck); + + if (aiptek->curSetting.xTilt != + AIPTEK_TILT_DISABLE) { + input_report_abs(inputdev, + ABS_TILT_X, + aiptek->curSetting.xTilt); + } + if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) { + input_report_abs(inputdev, + ABS_TILT_Y, + aiptek->curSetting.yTilt); + } + + /* Wheel support is in the form of a single-event + * firing. + */ + if (aiptek->curSetting.wheel != + AIPTEK_WHEEL_DISABLE) { + input_report_abs(inputdev, + ABS_WHEEL, + aiptek->curSetting.wheel); + aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; + } + } + input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); + input_sync(inputdev); + } + } + } + /* Report 3's come from the mouse in absolute mode. + */ + else if (data[0] == 3) { + if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { + aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; + } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE + (aiptek->curSetting.pointerMode)) { + aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; + } else { + x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); + y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); + + jitterable = data[5] & 0x1c; + + p = (data[5] & 0x01) != 0 ? 1 : 0; + dv = (data[5] & 0x02) != 0 ? 1 : 0; + left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; + right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; + middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; + + if (dv != 0) { + /* If we've not already sent a tool_button_?? code, do + * so now. Then set FIRED_BIT so it won't be resent unless + * the user forces FIRED_BIT off. + */ + if (TOOL_BUTTON_FIRED + (aiptek->curSetting.toolMode) == 0) { + input_report_key(inputdev, + TOOL_BUTTON(aiptek->curSetting.toolMode), + 1); + aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + } + + if (p != 0) { + input_report_abs(inputdev, ABS_X, x); + input_report_abs(inputdev, ABS_Y, y); + + input_report_key(inputdev, BTN_LEFT, left); + input_report_key(inputdev, BTN_MIDDLE, middle); + input_report_key(inputdev, BTN_RIGHT, right); + + /* Wheel support is in the form of a single-event + * firing. + */ + if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { + input_report_abs(inputdev, + ABS_WHEEL, + aiptek->curSetting.wheel); + aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; + } + } + input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); + input_sync(inputdev); + } + } + } + /* Report 4s come from the macro keys when pressed by stylus + */ + else if (data[0] == 4) { + jitterable = data[1] & 0x18; + + p = (data[1] & 0x01) != 0 ? 1 : 0; + dv = (data[1] & 0x02) != 0 ? 1 : 0; + tip = (data[1] & 0x04) != 0 ? 1 : 0; + bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; + pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; + + macro = data[3]; + z = le16_to_cpu(get_unaligned((__le16 *) (data + 4))); + + if (dv != 0) { + /* If we've not already sent a tool_button_?? code, do + * so now. Then set FIRED_BIT so it won't be resent unless + * the user forces FIRED_BIT off. + */ + if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + input_report_key(inputdev, + TOOL_BUTTON(aiptek->curSetting.toolMode), + 1); + aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + } + + if (p != 0) { + input_report_key(inputdev, BTN_TOUCH, tip); + input_report_key(inputdev, BTN_STYLUS, bs); + input_report_key(inputdev, BTN_STYLUS2, pck); + input_report_abs(inputdev, ABS_PRESSURE, z); + } + + /* For safety, we're sending key 'break' codes for the + * neighboring macro keys. + */ + if (macro > 0) { + input_report_key(inputdev, + macroKeyEvents[macro - 1], 0); + } + if (macro < 25) { + input_report_key(inputdev, + macroKeyEvents[macro + 1], 0); + } + input_report_key(inputdev, macroKeyEvents[macro], p); + input_report_abs(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_STYLUS); + input_sync(inputdev); + } + } + /* Report 5s come from the macro keys when pressed by mouse + */ + else if (data[0] == 5) { + jitterable = data[1] & 0x1c; + + p = (data[1] & 0x01) != 0 ? 1 : 0; + dv = (data[1] & 0x02) != 0 ? 1 : 0; + left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; + right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; + middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; + macro = data[3]; + + if (dv != 0) { + /* If we've not already sent a tool_button_?? code, do + * so now. Then set FIRED_BIT so it won't be resent unless + * the user forces FIRED_BIT off. + */ + if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + input_report_key(inputdev, + TOOL_BUTTON(aiptek->curSetting.toolMode), + 1); + aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + } + + if (p != 0) { + input_report_key(inputdev, BTN_LEFT, left); + input_report_key(inputdev, BTN_MIDDLE, middle); + input_report_key(inputdev, BTN_RIGHT, right); + } + + /* For safety, we're sending key 'break' codes for the + * neighboring macro keys. + */ + if (macro > 0) { + input_report_key(inputdev, + macroKeyEvents[macro - 1], 0); + } + if (macro < 25) { + input_report_key(inputdev, + macroKeyEvents[macro + 1], 0); + } + + input_report_key(inputdev, macroKeyEvents[macro], 1); + input_report_rel(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_MOUSE); + input_sync(inputdev); + } + } + /* We have no idea which tool can generate a report 6. Theoretically, + * neither need to, having been given reports 4 & 5 for such use. + * However, report 6 is the 'official-looking' report for macroKeys; + * reports 4 & 5 supposively are used to support unnamed, unknown + * hat switches (which just so happen to be the macroKeys.) + */ + else if (data[0] == 6) { + macro = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); + if (macro > 0) { + input_report_key(inputdev, macroKeyEvents[macro - 1], + 0); + } + if (macro < 25) { + input_report_key(inputdev, macroKeyEvents[macro + 1], + 0); + } + + /* If we've not already sent a tool_button_?? code, do + * so now. Then set FIRED_BIT so it won't be resent unless + * the user forces FIRED_BIT off. + */ + if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + input_report_key(inputdev, + TOOL_BUTTON(aiptek->curSetting. + toolMode), 1); + aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + } + + input_report_key(inputdev, macroKeyEvents[macro], 1); + input_report_abs(inputdev, ABS_MISC, + 1 | AIPTEK_REPORT_TOOL_UNKNOWN); + input_sync(inputdev); + } else { + dbg("Unknown report %d", data[0]); + } + + /* Jitter may occur when the user presses a button on the stlyus + * or the mouse. What we do to prevent that is wait 'x' milliseconds + * following a 'jitterable' event, which should give the hand some time + * stabilize itself. + * + * We just introduced aiptek->previousJitterable to carry forth the + * notion that jitter occurs when the button state changes from on to off: + * a person drawing, holding a button down is not subject to jittering. + * With that in mind, changing from upper button depressed to lower button + * WILL transition through a jitter delay. + */ + + if (aiptek->previousJitterable != jitterable && + aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) { + aiptek->endDelay = jiffies + + ((aiptek->curSetting.jitterDelay * HZ) / 1000); + aiptek->inDelay = 1; + } + aiptek->previousJitterable = jitterable; + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval != 0) { + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); + } +} + +/*********************************************************************** + * These are the USB id's known so far. We do not identify them to + * specific Aiptek model numbers, because there has been overlaps, + * use, and reuse of id's in existing models. Certain models have + * been known to use more than one ID, indicative perhaps of + * manufacturing revisions. In any event, we consider these + * IDs to not be model-specific nor unique. + */ +static const struct usb_device_id aiptek_ids[] = { + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)}, + {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, aiptek_ids); + +/*********************************************************************** + * Open an instance of the tablet driver. + */ +static int aiptek_open(struct input_dev *inputdev) +{ + struct aiptek *aiptek = input_get_drvdata(inputdev); + + aiptek->urb->dev = aiptek->usbdev; + if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) + return -EIO; + + return 0; +} + +/*********************************************************************** + * Close an instance of the tablet driver. + */ +static void aiptek_close(struct input_dev *inputdev) +{ + struct aiptek *aiptek = input_get_drvdata(inputdev); + + usb_kill_urb(aiptek->urb); +} + +/*********************************************************************** + * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x, + * where they were known as usb_set_report and usb_get_report. + */ +static int +aiptek_set_report(struct aiptek *aiptek, + unsigned char report_type, + unsigned char report_id, void *buffer, int size) +{ + return usb_control_msg(aiptek->usbdev, + usb_sndctrlpipe(aiptek->usbdev, 0), + USB_REQ_SET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_OUT, (report_type << 8) + report_id, + aiptek->ifnum, buffer, size, 5000); +} + +static int +aiptek_get_report(struct aiptek *aiptek, + unsigned char report_type, + unsigned char report_id, void *buffer, int size) +{ + return usb_control_msg(aiptek->usbdev, + usb_rcvctrlpipe(aiptek->usbdev, 0), + USB_REQ_GET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_IN, (report_type << 8) + report_id, + aiptek->ifnum, buffer, size, 5000); +} + +/*********************************************************************** + * Send a command to the tablet. + */ +static int +aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) +{ + const int sizeof_buf = 3 * sizeof(u8); + int ret; + u8 *buf; + + buf = kmalloc(sizeof_buf, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = 2; + buf[1] = command; + buf[2] = data; + + if ((ret = + aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { + dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x", + command, data); + } + kfree(buf); + return ret < 0 ? ret : 0; +} + +/*********************************************************************** + * Retrieve information from the tablet. Querying info is defined as first + * sending the {command,data} sequence as a command, followed by a wait + * (aka, "programmaticDelay") and then a "read" request. + */ +static int +aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) +{ + const int sizeof_buf = 3 * sizeof(u8); + int ret; + u8 *buf; + + buf = kmalloc(sizeof_buf, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = 2; + buf[1] = command; + buf[2] = data; + + if (aiptek_command(aiptek, command, data) != 0) { + kfree(buf); + return -EIO; + } + msleep(aiptek->curSetting.programmableDelay); + + if ((ret = + aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { + dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x", + buf[0], buf[1], buf[2]); + ret = -EIO; + } else { + ret = le16_to_cpu(get_unaligned((__le16 *) (buf + 1))); + } + kfree(buf); + return ret; +} + +/*********************************************************************** + * Program the tablet into either absolute or relative mode. + * We also get information about the tablet's size. + */ +static int aiptek_program_tablet(struct aiptek *aiptek) +{ + int ret; + /* Execute Resolution500LPI */ + if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0) + return ret; + + /* Query getModelCode */ + if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0) + return ret; + aiptek->features.modelCode = ret & 0xff; + + /* Query getODMCode */ + if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0) + return ret; + aiptek->features.odmCode = ret; + + /* Query getFirmwareCode */ + if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0) + return ret; + aiptek->features.firmwareCode = ret; + + /* Query getXextension */ + if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) + return ret; + aiptek->inputdev->absmin[ABS_X] = 0; + aiptek->inputdev->absmax[ABS_X] = ret - 1; + + /* Query getYextension */ + if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) + return ret; + aiptek->inputdev->absmin[ABS_Y] = 0; + aiptek->inputdev->absmax[ABS_Y] = ret - 1; + + /* Query getPressureLevels */ + if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) + return ret; + aiptek->inputdev->absmin[ABS_PRESSURE] = 0; + aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; + + /* Depending on whether we are in absolute or relative mode, we will + * do a switchToTablet(absolute) or switchToMouse(relative) command. + */ + if (aiptek->curSetting.coordinateMode == + AIPTEK_COORDINATE_ABSOLUTE_MODE) { + /* Execute switchToTablet */ + if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) { + return ret; + } + } else { + /* Execute switchToMouse */ + if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) { + return ret; + } + } + + /* Enable the macro keys */ + if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0) + return ret; +#if 0 + /* Execute FilterOn */ + if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0) + return ret; +#endif + + /* Execute AutoGainOn */ + if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0) + return ret; + + /* Reset the eventCount, so we track events from last (re)programming + */ + aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA; + aiptek->eventCount = 0; + + return 0; +} + +/*********************************************************************** + * Sysfs functions. Sysfs prefers that individually-tunable parameters + * exist in their separate pseudo-files. Summary data that is immutable + * may exist in a singular file so long as you don't define a writeable + * interface. + */ + +/*********************************************************************** + * support the 'size' file -- display support + */ +static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "%dx%d\n", + aiptek->inputdev->absmax[ABS_X] + 1, + aiptek->inputdev->absmax[ABS_Y] + 1); +} + +/* These structs define the sysfs files, param #1 is the name of the + * file, param 2 is the file permissions, param 3 & 4 are to the + * output generator and input parser routines. Absence of a routine is + * permitted -- it only means can't either 'cat' the file, or send data + * to it. + */ +static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); + +/*********************************************************************** + * support routines for the 'product_id' file + */ +static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", + aiptek->inputdev->id.product); +} + +static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); + +/*********************************************************************** + * support routines for the 'vendor_id' file + */ +static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); +} + +static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); + +/*********************************************************************** + * support routines for the 'vendor' file + */ +static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + int retval; + + if (aiptek == NULL) + return 0; + + retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer); + return retval; +} + +static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL); + +/*********************************************************************** + * support routines for the 'product' file + */ +static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + int retval; + + if (aiptek == NULL) + return 0; + + retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product); + return retval; +} + +static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL); + +/*********************************************************************** + * support routines for the 'pointer_mode' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.pointerMode) { + case AIPTEK_POINTER_ONLY_STYLUS_MODE: + s = "stylus"; + break; + + case AIPTEK_POINTER_ONLY_MOUSE_MODE: + s = "mouse"; + break; + + case AIPTEK_POINTER_EITHER_MODE: + s = "either"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "stylus") == 0) { + aiptek->newSetting.pointerMode = + AIPTEK_POINTER_ONLY_STYLUS_MODE; + } else if (strcmp(buf, "mouse") == 0) { + aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE; + } else if (strcmp(buf, "either") == 0) { + aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; + } + return count; +} + +static DEVICE_ATTR(pointer_mode, + S_IRUGO | S_IWUGO, + show_tabletPointerMode, store_tabletPointerMode); + +/*********************************************************************** + * support routines for the 'coordinate_mode' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.coordinateMode) { + case AIPTEK_COORDINATE_ABSOLUTE_MODE: + s = "absolute"; + break; + + case AIPTEK_COORDINATE_RELATIVE_MODE: + s = "relative"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "absolute") == 0) { + aiptek->newSetting.pointerMode = + AIPTEK_COORDINATE_ABSOLUTE_MODE; + } else if (strcmp(buf, "relative") == 0) { + aiptek->newSetting.pointerMode = + AIPTEK_COORDINATE_RELATIVE_MODE; + } + return count; +} + +static DEVICE_ATTR(coordinate_mode, + S_IRUGO | S_IWUGO, + show_tabletCoordinateMode, store_tabletCoordinateMode); + +/*********************************************************************** + * support routines for the 'tool_mode' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) { + case AIPTEK_TOOL_BUTTON_MOUSE_MODE: + s = "mouse"; + break; + + case AIPTEK_TOOL_BUTTON_ERASER_MODE: + s = "eraser"; + break; + + case AIPTEK_TOOL_BUTTON_PENCIL_MODE: + s = "pencil"; + break; + + case AIPTEK_TOOL_BUTTON_PEN_MODE: + s = "pen"; + break; + + case AIPTEK_TOOL_BUTTON_BRUSH_MODE: + s = "brush"; + break; + + case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE: + s = "airbrush"; + break; + + case AIPTEK_TOOL_BUTTON_LENS_MODE: + s = "lens"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "mouse") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE; + } else if (strcmp(buf, "eraser") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE; + } else if (strcmp(buf, "pencil") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE; + } else if (strcmp(buf, "pen") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; + } else if (strcmp(buf, "brush") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE; + } else if (strcmp(buf, "airbrush") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE; + } else if (strcmp(buf, "lens") == 0) { + aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE; + } + + return count; +} + +static DEVICE_ATTR(tool_mode, + S_IRUGO | S_IWUGO, + show_tabletToolMode, store_tabletToolMode); + +/*********************************************************************** + * support routines for the 'xtilt' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { + return snprintf(buf, PAGE_SIZE, "disable\n"); + } else { + return snprintf(buf, PAGE_SIZE, "%d\n", + aiptek->curSetting.xTilt); + } +} + +static ssize_t +store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + int x; + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "disable") == 0) { + aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; + } else { + x = (int)simple_strtol(buf, NULL, 10); + if (x >= AIPTEK_TILT_MIN && x <= AIPTEK_TILT_MAX) { + aiptek->newSetting.xTilt = x; + } + } + return count; +} + +static DEVICE_ATTR(xtilt, + S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt); + +/*********************************************************************** + * support routines for the 'ytilt' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { + return snprintf(buf, PAGE_SIZE, "disable\n"); + } else { + return snprintf(buf, PAGE_SIZE, "%d\n", + aiptek->curSetting.yTilt); + } +} + +static ssize_t +store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + int y; + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "disable") == 0) { + aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; + } else { + y = (int)simple_strtol(buf, NULL, 10); + if (y >= AIPTEK_TILT_MIN && y <= AIPTEK_TILT_MAX) { + aiptek->newSetting.yTilt = y; + } + } + return count; +} + +static DEVICE_ATTR(ytilt, + S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt); + +/*********************************************************************** + * support routines for the 'jitter' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); +} + +static ssize_t +store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10); + return count; +} + +static DEVICE_ATTR(jitter, + S_IRUGO | S_IWUGO, + show_tabletJitterDelay, store_tabletJitterDelay); + +/*********************************************************************** + * support routines for the 'delay' file. Note that this file + * both displays current setting and allows reprogramming. + */ +static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "%d\n", + aiptek->curSetting.programmableDelay); +} + +static ssize_t +store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10); + return count; +} + +static DEVICE_ATTR(delay, + S_IRUGO | S_IWUGO, + show_tabletProgrammableDelay, store_tabletProgrammableDelay); + +/*********************************************************************** + * support routines for the 'input_path' file. Note that this file + * only displays current setting. + */ +static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n", + aiptek->features.inputPath); +} + +static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL); + +/*********************************************************************** + * support routines for the 'event_count' file. Note that this file + * only displays current setting. + */ +static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); +} + +static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL); + +/*********************************************************************** + * support routines for the 'diagnostic' file. Note that this file + * only displays current setting. + */ +static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *retMsg; + + if (aiptek == NULL) + return 0; + + switch (aiptek->diagnostic) { + case AIPTEK_DIAGNOSTIC_NA: + retMsg = "no errors\n"; + break; + + case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE: + retMsg = "Error: receiving relative reports\n"; + break; + + case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE: + retMsg = "Error: receiving absolute reports\n"; + break; + + case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED: + if (aiptek->curSetting.pointerMode == + AIPTEK_POINTER_ONLY_MOUSE_MODE) { + retMsg = "Error: receiving stylus reports\n"; + } else { + retMsg = "Error: receiving mouse reports\n"; + } + break; + + default: + return 0; + } + return snprintf(buf, PAGE_SIZE, retMsg); +} + +static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); + +/*********************************************************************** + * support routines for the 'stylus_upper' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.stylusButtonUpper) { + case AIPTEK_STYLUS_UPPER_BUTTON: + s = "upper"; + break; + + case AIPTEK_STYLUS_LOWER_BUTTON: + s = "lower"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "upper") == 0) { + aiptek->newSetting.stylusButtonUpper = + AIPTEK_STYLUS_UPPER_BUTTON; + } else if (strcmp(buf, "lower") == 0) { + aiptek->newSetting.stylusButtonUpper = + AIPTEK_STYLUS_LOWER_BUTTON; + } + return count; +} + +static DEVICE_ATTR(stylus_upper, + S_IRUGO | S_IWUGO, + show_tabletStylusUpper, store_tabletStylusUpper); + +/*********************************************************************** + * support routines for the 'stylus_lower' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.stylusButtonLower) { + case AIPTEK_STYLUS_UPPER_BUTTON: + s = "upper"; + break; + + case AIPTEK_STYLUS_LOWER_BUTTON: + s = "lower"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "upper") == 0) { + aiptek->newSetting.stylusButtonLower = + AIPTEK_STYLUS_UPPER_BUTTON; + } else if (strcmp(buf, "lower") == 0) { + aiptek->newSetting.stylusButtonLower = + AIPTEK_STYLUS_LOWER_BUTTON; + } + return count; +} + +static DEVICE_ATTR(stylus_lower, + S_IRUGO | S_IWUGO, + show_tabletStylusLower, store_tabletStylusLower); + +/*********************************************************************** + * support routines for the 'mouse_left' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.mouseButtonLeft) { + case AIPTEK_MOUSE_LEFT_BUTTON: + s = "left"; + break; + + case AIPTEK_MOUSE_MIDDLE_BUTTON: + s = "middle"; + break; + + case AIPTEK_MOUSE_RIGHT_BUTTON: + s = "right"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "left") == 0) { + aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; + } else if (strcmp(buf, "middle") == 0) { + aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON; + } else if (strcmp(buf, "right") == 0) { + aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON; + } + return count; +} + +static DEVICE_ATTR(mouse_left, + S_IRUGO | S_IWUGO, + show_tabletMouseLeft, store_tabletMouseLeft); + +/*********************************************************************** + * support routines for the 'mouse_middle' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.mouseButtonMiddle) { + case AIPTEK_MOUSE_LEFT_BUTTON: + s = "left"; + break; + + case AIPTEK_MOUSE_MIDDLE_BUTTON: + s = "middle"; + break; + + case AIPTEK_MOUSE_RIGHT_BUTTON: + s = "right"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "left") == 0) { + aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON; + } else if (strcmp(buf, "middle") == 0) { + aiptek->newSetting.mouseButtonMiddle = + AIPTEK_MOUSE_MIDDLE_BUTTON; + } else if (strcmp(buf, "right") == 0) { + aiptek->newSetting.mouseButtonMiddle = + AIPTEK_MOUSE_RIGHT_BUTTON; + } + return count; +} + +static DEVICE_ATTR(mouse_middle, + S_IRUGO | S_IWUGO, + show_tabletMouseMiddle, store_tabletMouseMiddle); + +/*********************************************************************** + * support routines for the 'mouse_right' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + char *s; + + if (aiptek == NULL) + return 0; + + switch (aiptek->curSetting.mouseButtonRight) { + case AIPTEK_MOUSE_LEFT_BUTTON: + s = "left"; + break; + + case AIPTEK_MOUSE_MIDDLE_BUTTON: + s = "middle"; + break; + + case AIPTEK_MOUSE_RIGHT_BUTTON: + s = "right"; + break; + + default: + s = "unknown"; + break; + } + return snprintf(buf, PAGE_SIZE, "%s\n", s); +} + +static ssize_t +store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (strcmp(buf, "left") == 0) { + aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON; + } else if (strcmp(buf, "middle") == 0) { + aiptek->newSetting.mouseButtonRight = + AIPTEK_MOUSE_MIDDLE_BUTTON; + } else if (strcmp(buf, "right") == 0) { + aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; + } + return count; +} + +static DEVICE_ATTR(mouse_right, + S_IRUGO | S_IWUGO, + show_tabletMouseRight, store_tabletMouseRight); + +/*********************************************************************** + * support routines for the 'wheel' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { + return snprintf(buf, PAGE_SIZE, "disable\n"); + } else { + return snprintf(buf, PAGE_SIZE, "%d\n", + aiptek->curSetting.wheel); + } +} + +static ssize_t +store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10); + return count; +} + +static DEVICE_ATTR(wheel, + S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel); + +/*********************************************************************** + * support routines for the 'execute' file. Note that this file + * both displays current setting and allows for setting changing. + */ +static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + /* There is nothing useful to display, so a one-line manual + * is in order... + */ + return snprintf(buf, PAGE_SIZE, + "Write anything to this file to program your tablet.\n"); +} + +static ssize_t +store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + /* We do not care what you write to this file. Merely the action + * of writing to this file triggers a tablet reprogramming. + */ + memcpy(&aiptek->curSetting, &aiptek->newSetting, + sizeof(struct aiptek_settings)); + + if (aiptek_program_tablet(aiptek) < 0) + return -EIO; + + return count; +} + +static DEVICE_ATTR(execute, + S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute); + +/*********************************************************************** + * support routines for the 'odm_code' file. Note that this file + * only displays current setting. + */ +static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); +} + +static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL); + +/*********************************************************************** + * support routines for the 'model_code' file. Note that this file + * only displays current setting. + */ +static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); +} + +static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL); + +/*********************************************************************** + * support routines for the 'firmware_code' file. Note that this file + * only displays current setting. + */ +static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct aiptek *aiptek = dev_get_drvdata(dev); + + if (aiptek == NULL) + return 0; + + return snprintf(buf, PAGE_SIZE, "%04x\n", + aiptek->features.firmwareCode); +} + +static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); + +/*********************************************************************** + * This routine removes all existing sysfs files managed by this device + * driver. + */ +static void aiptek_delete_files(struct device *dev) +{ + device_remove_file(dev, &dev_attr_size); + device_remove_file(dev, &dev_attr_product_id); + device_remove_file(dev, &dev_attr_vendor_id); + device_remove_file(dev, &dev_attr_vendor); + device_remove_file(dev, &dev_attr_product); + device_remove_file(dev, &dev_attr_pointer_mode); + device_remove_file(dev, &dev_attr_coordinate_mode); + device_remove_file(dev, &dev_attr_tool_mode); + device_remove_file(dev, &dev_attr_xtilt); + device_remove_file(dev, &dev_attr_ytilt); + device_remove_file(dev, &dev_attr_jitter); + device_remove_file(dev, &dev_attr_delay); + device_remove_file(dev, &dev_attr_input_path); + device_remove_file(dev, &dev_attr_event_count); + device_remove_file(dev, &dev_attr_diagnostic); + device_remove_file(dev, &dev_attr_odm_code); + device_remove_file(dev, &dev_attr_model_code); + device_remove_file(dev, &dev_attr_firmware_code); + device_remove_file(dev, &dev_attr_stylus_lower); + device_remove_file(dev, &dev_attr_stylus_upper); + device_remove_file(dev, &dev_attr_mouse_left); + device_remove_file(dev, &dev_attr_mouse_middle); + device_remove_file(dev, &dev_attr_mouse_right); + device_remove_file(dev, &dev_attr_wheel); + device_remove_file(dev, &dev_attr_execute); +} + +/*********************************************************************** + * This routine creates the sysfs files managed by this device + * driver. + */ +static int aiptek_add_files(struct device *dev) +{ + int ret; + + if ((ret = device_create_file(dev, &dev_attr_size)) || + (ret = device_create_file(dev, &dev_attr_product_id)) || + (ret = device_create_file(dev, &dev_attr_vendor_id)) || + (ret = device_create_file(dev, &dev_attr_vendor)) || + (ret = device_create_file(dev, &dev_attr_product)) || + (ret = device_create_file(dev, &dev_attr_pointer_mode)) || + (ret = device_create_file(dev, &dev_attr_coordinate_mode)) || + (ret = device_create_file(dev, &dev_attr_tool_mode)) || + (ret = device_create_file(dev, &dev_attr_xtilt)) || + (ret = device_create_file(dev, &dev_attr_ytilt)) || + (ret = device_create_file(dev, &dev_attr_jitter)) || + (ret = device_create_file(dev, &dev_attr_delay)) || + (ret = device_create_file(dev, &dev_attr_input_path)) || + (ret = device_create_file(dev, &dev_attr_event_count)) || + (ret = device_create_file(dev, &dev_attr_diagnostic)) || + (ret = device_create_file(dev, &dev_attr_odm_code)) || + (ret = device_create_file(dev, &dev_attr_model_code)) || + (ret = device_create_file(dev, &dev_attr_firmware_code)) || + (ret = device_create_file(dev, &dev_attr_stylus_lower)) || + (ret = device_create_file(dev, &dev_attr_stylus_upper)) || + (ret = device_create_file(dev, &dev_attr_mouse_left)) || + (ret = device_create_file(dev, &dev_attr_mouse_middle)) || + (ret = device_create_file(dev, &dev_attr_mouse_right)) || + (ret = device_create_file(dev, &dev_attr_wheel)) || + (ret = device_create_file(dev, &dev_attr_execute))) { + err("aiptek: killing own sysfs device files\n"); + aiptek_delete_files(dev); + } + return ret; +} + +/*********************************************************************** + * This routine is called when a tablet has been identified. It basically + * sets up the tablet and the driver's internal structures. + */ +static int +aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct aiptek *aiptek; + struct input_dev *inputdev; + struct input_handle *inputhandle; + struct list_head *node, *next; + int i; + int speeds[] = { 0, + AIPTEK_PROGRAMMABLE_DELAY_50, + AIPTEK_PROGRAMMABLE_DELAY_400, + AIPTEK_PROGRAMMABLE_DELAY_25, + AIPTEK_PROGRAMMABLE_DELAY_100, + AIPTEK_PROGRAMMABLE_DELAY_200, + AIPTEK_PROGRAMMABLE_DELAY_300 + }; + int err = -ENOMEM; + + /* programmableDelay is where the command-line specified + * delay is kept. We make it the first element of speeds[], + * so therefore, your override speed is tried first, then the + * remainder. Note that the default value of 400ms will be tried + * if you do not specify any command line parameter. + */ + speeds[0] = programmableDelay; + + aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); + inputdev = input_allocate_device(); + if (!aiptek || !inputdev) + goto fail1; + + aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, + GFP_ATOMIC, &aiptek->data_dma); + if (!aiptek->data) + goto fail1; + + aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!aiptek->urb) + goto fail2; + + aiptek->inputdev = inputdev; + aiptek->usbdev = usbdev; + aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; + aiptek->inDelay = 0; + aiptek->endDelay = 0; + aiptek->previousJitterable = 0; + + /* Set up the curSettings struct. Said struct contains the current + * programmable parameters. The newSetting struct contains changes + * the user makes to the settings via the sysfs interface. Those + * changes are not "committed" to curSettings until the user + * writes to the sysfs/.../execute file. + */ + aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; + aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE; + aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; + aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE; + aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE; + aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; + aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON; + aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; + aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON; + aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON; + aiptek->curSetting.jitterDelay = jitterDelay; + aiptek->curSetting.programmableDelay = programmableDelay; + + /* Both structs should have equivalent settings + */ + aiptek->newSetting = aiptek->curSetting; + + /* Determine the usb devices' physical path. + * Asketh not why we always pretend we're using "../input0", + * but I suspect this will have to be refactored one + * day if a single USB device can be a keyboard & a mouse + * & a tablet, and the inputX number actually will tell + * us something... + */ + usb_make_path(usbdev, aiptek->features.usbPath, + sizeof(aiptek->features.usbPath)); + strlcat(aiptek->features.usbPath, "/input0", + sizeof(aiptek->features.usbPath)); + + /* Set up client data, pointers to open and close routines + * for the input device. + */ + inputdev->name = "Aiptek"; + inputdev->phys = aiptek->features.usbPath; + usb_to_input_id(usbdev, &inputdev->id); + inputdev->dev.parent = &intf->dev; + + input_set_drvdata(inputdev, aiptek); + + inputdev->open = aiptek_open; + inputdev->close = aiptek_close; + + /* Now program the capacities of the tablet, in terms of being + * an input device. + */ + inputdev->evbit[0] |= BIT(EV_KEY) + | BIT(EV_ABS) + | BIT(EV_REL) + | BIT(EV_MSC); + + inputdev->absbit[0] |= BIT(ABS_MISC); + + inputdev->relbit[0] |= + (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); + + inputdev->keybit[LONG(BTN_LEFT)] |= + (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); + + inputdev->keybit[LONG(BTN_DIGI)] |= + (BIT(BTN_TOOL_PEN) | + BIT(BTN_TOOL_RUBBER) | + BIT(BTN_TOOL_PENCIL) | + BIT(BTN_TOOL_AIRBRUSH) | + BIT(BTN_TOOL_BRUSH) | + BIT(BTN_TOOL_MOUSE) | + BIT(BTN_TOOL_LENS) | + BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); + + inputdev->mscbit[0] = BIT(MSC_SERIAL); + + /* Programming the tablet macro keys needs to be done with a for loop + * as the keycodes are discontiguous. + */ + for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) + set_bit(macroKeyEvents[i], inputdev->keybit); + + /* + * Program the input device coordinate capacities. We do not yet + * know what maximum X, Y, and Z values are, so we're putting fake + * values in. Later, we'll ask the tablet to put in the correct + * values. + */ + input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); + input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); + + endpoint = &intf->altsetting[0].endpoint[0].desc; + + /* Go set up our URB, which is called when the tablet receives + * input. + */ + usb_fill_int_urb(aiptek->urb, + aiptek->usbdev, + usb_rcvintpipe(aiptek->usbdev, + endpoint->bEndpointAddress), + aiptek->data, 8, aiptek_irq, aiptek, + endpoint->bInterval); + + aiptek->urb->transfer_dma = aiptek->data_dma; + aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* Program the tablet. This sets the tablet up in the mode + * specified in newSetting, and also queries the tablet's + * physical capacities. + * + * Sanity check: if a tablet doesn't like the slow programmatic + * delay, we often get sizes of 0x0. Let's use that as an indicator + * to try faster delays, up to 25 ms. If that logic fails, well, you'll + * have to explain to us how your tablet thinks it's 0x0, and yet that's + * not an error :-) + */ + + for (i = 0; i < ARRAY_SIZE(speeds); ++i) { + aiptek->curSetting.programmableDelay = speeds[i]; + (void)aiptek_program_tablet(aiptek); + if (aiptek->inputdev->absmax[ABS_X] > 0) { + info("input: Aiptek using %d ms programming speed\n", + aiptek->curSetting.programmableDelay); + break; + } + } + + /* Register the tablet as an Input Device + */ + err = input_register_device(aiptek->inputdev); + if (err) + goto fail2; + + /* We now will look for the evdev device which is mapped to + * the tablet. The partial name is kept in the link list of + * input_handles associated with this input device. + * What identifies an evdev input_handler is that it begins + * with 'event', continues with a digit, and that in turn + * is mapped to input/eventN. + */ + list_for_each_safe(node, next, &inputdev->h_list) { + inputhandle = to_handle(node); + if (strncmp(inputhandle->name, "event", 5) == 0) { + strcpy(aiptek->features.inputPath, inputhandle->name); + break; + } + } + + /* Associate this driver's struct with the usb interface. + */ + usb_set_intfdata(intf, aiptek); + + /* Set up the sysfs files + */ + aiptek_add_files(&intf->dev); + + /* Make sure the evdev module is loaded. Assuming evdev IS a module :-) + */ + if (request_module("evdev") != 0) + info("aiptek: error loading 'evdev' module"); + + return 0; + + fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, + aiptek->data_dma); + fail1: input_free_device(inputdev); + kfree(aiptek); + return err; +} + +/*********************************************************************** + * Deal with tablet disconnecting from the system. + */ +static void aiptek_disconnect(struct usb_interface *intf) +{ + struct aiptek *aiptek = usb_get_intfdata(intf); + + /* Disassociate driver's struct with usb interface + */ + usb_set_intfdata(intf, NULL); + if (aiptek != NULL) { + /* Free & unhook everything from the system. + */ + usb_kill_urb(aiptek->urb); + input_unregister_device(aiptek->inputdev); + aiptek_delete_files(&intf->dev); + usb_free_urb(aiptek->urb); + usb_buffer_free(interface_to_usbdev(intf), + AIPTEK_PACKET_LENGTH, + aiptek->data, aiptek->data_dma); + kfree(aiptek); + } +} + +static struct usb_driver aiptek_driver = { + .name = "aiptek", + .probe = aiptek_probe, + .disconnect = aiptek_disconnect, + .id_table = aiptek_ids, +}; + +static int __init aiptek_init(void) +{ + int result = usb_register(&aiptek_driver); + if (result == 0) { + info(DRIVER_VERSION ": " DRIVER_AUTHOR); + info(DRIVER_DESC); + } + return result; +} + +static void __exit aiptek_exit(void) +{ + usb_deregister(&aiptek_driver); +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(programmableDelay, int, 0); +MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming"); +module_param(jitterDelay, int, 0); +MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay"); + +module_init(aiptek_init); +module_exit(aiptek_exit); diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c new file mode 100644 index 0000000..b2ca10f2f --- /dev/null +++ b/drivers/input/tablet/gtco.c @@ -0,0 +1,1055 @@ +/* -*- linux-c -*- + +GTCO digitizer USB driver + +Use the err(), dbg() and info() macros from usb.h for system logging + +TO CHECK: Is pressure done right on report 5? + +Copyright (C) 2006 GTCO CalComp + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; version 2 +of the License. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of GTCO-CalComp not be used in advertising +or publicity pertaining to distribution of the software without specific, +written prior permission. GTCO-CalComp makes no representations about the +suitability of this software for any purpose. It is provided "as is" +without express or implied warranty. + +GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +GTCO CalComp, Inc. +7125 Riverwood Drive +Columbia, MD 21046 + +Jeremy Roberson jroberson@gtcocalcomp.com +Scott Hill shill@gtcocalcomp.com +*/ + + + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#include +#include + +/* Version with a Major number of 2 is for kernel inclusion only. */ +#define GTCO_VERSION "2.00.0006" + + +/* MACROS */ + +#define VENDOR_ID_GTCO 0x078C +#define PID_400 0x400 +#define PID_401 0x401 +#define PID_1000 0x1000 +#define PID_1001 0x1001 +#define PID_1002 0x1002 + +/* Max size of a single report */ +#define REPORT_MAX_SIZE 10 + + +/* Bitmask whether pen is in range */ +#define MASK_INRANGE 0x20 +#define MASK_BUTTON 0x01F + +#define PATHLENGTH 64 + +/* DATA STRUCTURES */ + +/* Device table */ +static struct usb_device_id gtco_usbid_table [] = { + { USB_DEVICE(VENDOR_ID_GTCO, PID_400) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_401) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) }, + { } +}; +MODULE_DEVICE_TABLE (usb, gtco_usbid_table); + + +/* Structure to hold all of our device specific stuff */ +struct gtco { + + struct input_dev *inputdevice; /* input device struct pointer */ + struct usb_device *usbdev; /* the usb device for this device */ + struct urb *urbinfo; /* urb for incoming reports */ + dma_addr_t buf_dma; /* dma addr of the data buffer*/ + unsigned char * buffer; /* databuffer for reports */ + + char usbpath[PATHLENGTH]; + int openCount; + + /* Information pulled from Report Descriptor */ + u32 usage; + u32 min_X; + u32 max_X; + u32 min_Y; + u32 max_Y; + s8 mintilt_X; + s8 maxtilt_X; + s8 mintilt_Y; + s8 maxtilt_Y; + u32 maxpressure; + u32 minpressure; +}; + + + +/* Code for parsing the HID REPORT DESCRIPTOR */ + +/* From HID1.11 spec */ +struct hid_descriptor +{ + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + + +#define HID_DESCRIPTOR_SIZE 9 +#define HID_DEVICE_TYPE 33 +#define REPORT_DEVICE_TYPE 34 + + +#define PREF_TAG(x) ((x)>>4) +#define PREF_TYPE(x) ((x>>2)&0x03) +#define PREF_SIZE(x) ((x)&0x03) + +#define TYPE_MAIN 0 +#define TYPE_GLOBAL 1 +#define TYPE_LOCAL 2 +#define TYPE_RESERVED 3 + +#define TAG_MAIN_INPUT 0x8 +#define TAG_MAIN_OUTPUT 0x9 +#define TAG_MAIN_FEATURE 0xB +#define TAG_MAIN_COL_START 0xA +#define TAG_MAIN_COL_END 0xC + +#define TAG_GLOB_USAGE 0 +#define TAG_GLOB_LOG_MIN 1 +#define TAG_GLOB_LOG_MAX 2 +#define TAG_GLOB_PHYS_MIN 3 +#define TAG_GLOB_PHYS_MAX 4 +#define TAG_GLOB_UNIT_EXP 5 +#define TAG_GLOB_UNIT 6 +#define TAG_GLOB_REPORT_SZ 7 +#define TAG_GLOB_REPORT_ID 8 +#define TAG_GLOB_REPORT_CNT 9 +#define TAG_GLOB_PUSH 10 +#define TAG_GLOB_POP 11 + +#define TAG_GLOB_MAX 12 + +#define DIGITIZER_USAGE_TIP_PRESSURE 0x30 +#define DIGITIZER_USAGE_TILT_X 0x3D +#define DIGITIZER_USAGE_TILT_Y 0x3E + + +/* + * This is an abbreviated parser for the HID Report Descriptor. We + * know what devices we are talking to, so this is by no means meant + * to be generic. We can make some safe assumptions: + * + * - We know there are no LONG tags, all short + * - We know that we have no MAIN Feature and MAIN Output items + * - We know what the IRQ reports are supposed to look like. + * + * The main purpose of this is to use the HID report desc to figure + * out the mins and maxs of the fields in the IRQ reports. The IRQ + * reports for 400/401 change slightly if the max X is bigger than 64K. + * + */ +static void parse_hid_report_descriptor(struct gtco *device, char * report, + int length) +{ + int x, i = 0; + + /* Tag primitive vars */ + __u8 prefix; + __u8 size; + __u8 tag; + __u8 type; + __u8 data = 0; + __u16 data16 = 0; + __u32 data32 = 0; + + /* For parsing logic */ + int inputnum = 0; + __u32 usage = 0; + + /* Global Values, indexed by TAG */ + __u32 globalval[TAG_GLOB_MAX]; + __u32 oldval[TAG_GLOB_MAX]; + + /* Debug stuff */ + char maintype = 'x'; + char globtype[12]; + int indent = 0; + char indentstr[10] = ""; + + + dbg("======>>>>>>PARSE<<<<<<======"); + + /* Walk this report and pull out the info we need */ + while (i < length) { + prefix = report[i]; + + /* Skip over prefix */ + i++; + + /* Determine data size and save the data in the proper variable */ + size = PREF_SIZE(prefix); + switch (size) { + case 1: + data = report[i]; + break; + case 2: + data16 = le16_to_cpu(get_unaligned((__le16 *)&report[i])); + break; + case 3: + size = 4; + data32 = le32_to_cpu(get_unaligned((__le32 *)&report[i])); + break; + } + + /* Skip size of data */ + i += size; + + /* What we do depends on the tag type */ + tag = PREF_TAG(prefix); + type = PREF_TYPE(prefix); + switch (type) { + case TYPE_MAIN: + strcpy(globtype, ""); + switch (tag) { + + case TAG_MAIN_INPUT: + /* + * The INPUT MAIN tag signifies this is + * information from a report. We need to + * figure out what it is and store the + * min/max values + */ + + maintype = 'I'; + if (data == 2) + strcpy(globtype, "Variable"); + else if (data == 3) + strcpy(globtype, "Var|Const"); + + dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits", + globalval[TAG_GLOB_REPORT_ID], inputnum, + globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX], + globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN], + globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]); + + + /* + We can assume that the first two input items + are always the X and Y coordinates. After + that, we look for everything else by + local usage value + */ + switch (inputnum) { + case 0: /* X coord */ + dbg("GER: X Usage: 0x%x", usage); + if (device->max_X == 0) { + device->max_X = globalval[TAG_GLOB_LOG_MAX]; + device->min_X = globalval[TAG_GLOB_LOG_MIN]; + } + break; + + case 1: /* Y coord */ + dbg("GER: Y Usage: 0x%x", usage); + if (device->max_Y == 0) { + device->max_Y = globalval[TAG_GLOB_LOG_MAX]; + device->min_Y = globalval[TAG_GLOB_LOG_MIN]; + } + break; + + default: + /* Tilt X */ + if (usage == DIGITIZER_USAGE_TILT_X) { + if (device->maxtilt_X == 0) { + device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_X = globalval[TAG_GLOB_LOG_MIN]; + } + } + + /* Tilt Y */ + if (usage == DIGITIZER_USAGE_TILT_Y) { + if (device->maxtilt_Y == 0) { + device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN]; + } + } + + /* Pressure */ + if (usage == DIGITIZER_USAGE_TIP_PRESSURE) { + if (device->maxpressure == 0) { + device->maxpressure = globalval[TAG_GLOB_LOG_MAX]; + device->minpressure = globalval[TAG_GLOB_LOG_MIN]; + } + } + + break; + } + + inputnum++; + break; + + case TAG_MAIN_OUTPUT: + maintype = 'O'; + break; + + case TAG_MAIN_FEATURE: + maintype = 'F'; + break; + + case TAG_MAIN_COL_START: + maintype = 'S'; + + if (data == 0) { + dbg("======>>>>>> Physical"); + strcpy(globtype, "Physical"); + } else + dbg("======>>>>>>"); + + /* Indent the debug output */ + indent++; + for (x = 0; x < indent; x++) + indentstr[x] = '-'; + indentstr[x] = 0; + + /* Save global tags */ + for (x = 0; x < TAG_GLOB_MAX; x++) + oldval[x] = globalval[x]; + + break; + + case TAG_MAIN_COL_END: + dbg("<<<<<<======"); + maintype = 'E'; + indent--; + for (x = 0; x < indent; x++) + indentstr[x] = '-'; + indentstr[x] = 0; + + /* Copy global tags back */ + for (x = 0; x < TAG_GLOB_MAX; x++) + globalval[x] = oldval[x]; + + break; + } + + switch (size) { + case 1: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data); + break; + + case 2: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data16); + break; + + case 4: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr, tag, maintype, size, globtype, data32); + break; + } + break; + + case TYPE_GLOBAL: + switch (tag) { + case TAG_GLOB_USAGE: + /* + * First time we hit the global usage tag, + * it should tell us the type of device + */ + if (device->usage == 0) + device->usage = data; + + strcpy(globtype, "USAGE"); + break; + + case TAG_GLOB_LOG_MIN: + strcpy(globtype, "LOG_MIN"); + break; + + case TAG_GLOB_LOG_MAX: + strcpy(globtype, "LOG_MAX"); + break; + + case TAG_GLOB_PHYS_MIN: + strcpy(globtype, "PHYS_MIN"); + break; + + case TAG_GLOB_PHYS_MAX: + strcpy(globtype, "PHYS_MAX"); + break; + + case TAG_GLOB_UNIT_EXP: + strcpy(globtype, "EXP"); + break; + + case TAG_GLOB_UNIT: + strcpy(globtype, "UNIT"); + break; + + case TAG_GLOB_REPORT_SZ: + strcpy(globtype, "REPORT_SZ"); + break; + + case TAG_GLOB_REPORT_ID: + strcpy(globtype, "REPORT_ID"); + /* New report, restart numbering */ + inputnum = 0; + break; + + case TAG_GLOB_REPORT_CNT: + strcpy(globtype, "REPORT_CNT"); + break; + + case TAG_GLOB_PUSH: + strcpy(globtype, "PUSH"); + break; + + case TAG_GLOB_POP: + strcpy(globtype, "POP"); + break; + } + + /* Check to make sure we have a good tag number + so we don't overflow array */ + if (tag < TAG_GLOB_MAX) { + switch (size) { + case 1: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data); + globalval[tag] = data; + break; + + case 2: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data16); + globalval[tag] = data16; + break; + + case 4: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", + indentstr, globtype, tag, size, data32); + globalval[tag] = data32; + break; + } + } else { + dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ", + indentstr, tag, size); + } + break; + + case TYPE_LOCAL: + switch (tag) { + case TAG_GLOB_USAGE: + strcpy(globtype, "USAGE"); + /* Always 1 byte */ + usage = data; + break; + + case TAG_GLOB_LOG_MIN: + strcpy(globtype, "MIN"); + break; + + case TAG_GLOB_LOG_MAX: + strcpy(globtype, "MAX"); + break; + + default: + strcpy(globtype, "UNKNOWN"); + break; + } + + switch (size) { + case 1: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data); + break; + + case 2: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data16); + break; + + case 4: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr, tag, globtype, size, data32); + break; + } + + break; + } + } +} + +/* INPUT DRIVER Routines */ + +/* + * Called when opening the input device. This will submit the URB to + * the usb system so we start getting reports + */ +static int gtco_input_open(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + device->urbinfo->dev = device->usbdev; + if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) + return -EIO; + + return 0; +} + +/* + * Called when closing the input device. This will unlink the URB + */ +static void gtco_input_close(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + usb_kill_urb(device->urbinfo); +} + + +/* + * Setup input device capabilities. Tell the input system what this + * device is capable of generating. + * + * This information is based on what is read from the HID report and + * placed in the struct gtco structure + * + */ +static void gtco_setup_caps(struct input_dev *inputdev) +{ + struct gtco *device = input_get_drvdata(inputdev); + + /* Which events */ + inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + + /* Misc event menu block */ + inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ; + + /* Absolute values based on HID report info */ + input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X, + 0, 0); + input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y, + 0, 0); + + /* Proximity */ + input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0); + + /* Tilt & pressure */ + input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X, + device->maxtilt_X, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y, + device->maxtilt_Y, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure, + device->maxpressure, 0, 0); + + /* Transducer */ + input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0); +} + +/* USB Routines */ + +/* + * URB callback routine. Called when we get IRQ reports from the + * digitizer. + * + * This bridges the USB and input device worlds. It generates events + * on the input device based on the USB reports. + */ +static void gtco_urb_callback(struct urb *urbinfo) +{ + struct gtco *device = urbinfo->context; + struct input_dev *inputdev; + int rc; + u32 val = 0; + s8 valsigned = 0; + char le_buffer[2]; + + inputdev = device->inputdevice; + + /* Was callback OK? */ + if (urbinfo->status == -ECONNRESET || + urbinfo->status == -ENOENT || + urbinfo->status == -ESHUTDOWN) { + + /* Shutdown is occurring. Return and don't queue up any more */ + return; + } + + if (urbinfo->status != 0) { + /* + * Some unknown error. Hopefully temporary. Just go and + * requeue an URB + */ + goto resubmit; + } + + /* + * Good URB, now process + */ + + /* PID dependent when we interpret the report */ + if (inputdev->id.product == PID_1000 || + inputdev->id.product == PID_1001 || + inputdev->id.product == PID_1002) { + + /* + * Switch on the report ID + * Conveniently, the reports have more information, the higher + * the report number. We can just fall through the case + * statements if we start with the highest number report + */ + switch (device->buffer[0]) { + case 5: + /* Pressure is 9 bits */ + val = ((u16)(device->buffer[8]) << 1); + val |= (u16)(device->buffer[7] >> 7); + input_report_abs(inputdev, ABS_PRESSURE, + device->buffer[8]); + + /* Mask out the Y tilt value used for pressure */ + device->buffer[7] = (u8)((device->buffer[7]) & 0x7F); + + /* Fall thru */ + case 4: + /* Tilt */ + + /* Sign extend these 7 bit numbers. */ + if (device->buffer[6] & 0x40) + device->buffer[6] |= 0x80; + + if (device->buffer[7] & 0x40) + device->buffer[7] |= 0x80; + + + valsigned = (device->buffer[6]); + input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned); + + valsigned = (device->buffer[7]); + input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned); + + /* Fall thru */ + case 2: + case 3: + /* Convert buttons, only 5 bits possible */ + val = (device->buffer[5]) & MASK_BUTTON; + + /* We don't apply any meaning to the bitmask, + just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + + /* Fall thru */ + case 1: + /* All reports have X and Y coords in the same place */ + val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1])); + input_report_abs(inputdev, ABS_X, val); + + val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3])); + input_report_abs(inputdev, ABS_Y, val); + + /* Ditto for proximity bit */ + val = device->buffer[5] & MASK_INRANGE ? 1 : 0; + input_report_abs(inputdev, ABS_DISTANCE, val); + + /* Report 1 is an exception to how we handle buttons */ + /* Buttons are an index, not a bitmask */ + if (device->buffer[0] == 1) { + + /* + * Convert buttons, 5 bit index + * Report value of index set as one, + * the rest as 0 + */ + val = device->buffer[5] & MASK_BUTTON; + dbg("======>>>>>>REPORT 1: val 0x%X(%d)", + val, val); + + /* + * We don't apply any meaning to the button + * index, just report it + */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + } + break; + + case 7: + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, + device->buffer[1]); + break; + } + } + + /* Other pid class */ + if (inputdev->id.product == PID_400 || + inputdev->id.product == PID_401) { + + /* Report 2 */ + if (device->buffer[0] == 2) { + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]); + } + + /* Report 1 */ + if (device->buffer[0] == 1) { + char buttonbyte; + + /* IF X max > 64K, we still a bit from the y report */ + if (device->max_X > 0x10000) { + + val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]); + val |= (u32)(((u8)device->buffer[3] & 0x1) << 16); + + input_report_abs(inputdev, ABS_X, val); + + le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1); + le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7); + + le_buffer[1] = (u8)(device->buffer[4] >> 1); + le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7); + + val = le16_to_cpu(get_unaligned((__le16 *)le_buffer)); + input_report_abs(inputdev, ABS_Y, val); + + /* + * Shift the button byte right by one to + * make it look like the standard report + */ + buttonbyte = device->buffer[5] >> 1; + } else { + + val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1])); + input_report_abs(inputdev, ABS_X, val); + + val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3])); + input_report_abs(inputdev, ABS_Y, val); + + buttonbyte = device->buffer[5]; + } + + /* BUTTONS and PROXIMITY */ + val = buttonbyte & MASK_INRANGE ? 1 : 0; + input_report_abs(inputdev, ABS_DISTANCE, val); + + /* Convert buttons, only 4 bits possible */ + val = buttonbyte & 0x0F; +#ifdef USE_BUTTONS + for (i = 0; i < 5; i++) + input_report_key(inputdev, BTN_DIGI + i, val & (1 << i)); +#else + /* We don't apply any meaning to the bitmask, just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); +#endif + + /* TRANSDUCER */ + input_report_abs(inputdev, ABS_MISC, device->buffer[6]); + } + } + + /* Everybody gets report ID's */ + input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]); + + /* Sync it up */ + input_sync(inputdev); + + resubmit: + rc = usb_submit_urb(urbinfo, GFP_ATOMIC); + if (rc != 0) + err("usb_submit_urb failed rc=0x%x", rc); +} + +/* + * The probe routine. This is called when the kernel find the matching USB + * vendor/product. We do the following: + * + * - Allocate mem for a local structure to manage the device + * - Request a HID Report Descriptor from the device and parse it to + * find out the device parameters + * - Create an input device and assign it attributes + * - Allocate an URB so the device can talk to us when the input + * queue is open + */ +static int gtco_probe(struct usb_interface *usbinterface, + const struct usb_device_id *id) +{ + + struct gtco *gtco; + struct input_dev *input_dev; + struct hid_descriptor *hid_desc; + char *report = NULL; + int result = 0, retry; + int error; + struct usb_endpoint_descriptor *endpoint; + + /* Allocate memory for device structure */ + gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gtco || !input_dev) { + err("No more memory"); + error = -ENOMEM; + goto err_free_devs; + } + + /* Set pointer to the input device */ + gtco->inputdevice = input_dev; + + /* Save interface information */ + gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); + + /* Allocate some data for incoming reports */ + gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE, + GFP_KERNEL, >co->buf_dma); + if (!gtco->buffer) { + err("No more memory for us buffers"); + error = -ENOMEM; + goto err_free_devs; + } + + /* Allocate URB for reports */ + gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL); + if (!gtco->urbinfo) { + err("Failed to allocate URB"); + return -ENOMEM; + goto err_free_buf; + } + + /* + * The endpoint is always altsetting 0, we know this since we know + * this device only has one interrupt endpoint + */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + /* Some debug */ + dbg("gtco # interfaces: %d", usbinterface->num_altsetting); + dbg("num endpoints: %d", usbinterface->cur_altsetting->desc.bNumEndpoints); + dbg("interface class: %d", usbinterface->cur_altsetting->desc.bInterfaceClass); + dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType); + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) + dbg("endpoint: we have interrupt endpoint\n"); + + dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen); + + /* + * Find the HID descriptor so we can find out the size of the + * HID report descriptor + */ + if (usb_get_extra_descriptor(usbinterface->cur_altsetting, + HID_DEVICE_TYPE, &hid_desc) != 0){ + err("Can't retrieve exta USB descriptor to get hid report descriptor length"); + error = -EIO; + goto err_free_urb; + } + + dbg("Extra descriptor success: type:%d len:%d", + hid_desc->bDescriptorType, hid_desc->wDescriptorLength); + + report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); + if (!report) { + err("No more memory for report"); + error = -ENOMEM; + goto err_free_urb; + } + + /* Couple of tries to get reply */ + for (retry = 0; retry < 3; retry++) { + result = usb_control_msg(gtco->usbdev, + usb_rcvctrlpipe(gtco->usbdev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + REPORT_DEVICE_TYPE << 8, + 0, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + + if (result == hid_desc->wDescriptorLength) + break; + } + + /* If we didn't get the report, fail */ + dbg("usb_control_msg result: :%d", result); + if (result != hid_desc->wDescriptorLength) { + err("Failed to get HID Report Descriptor of size: %d", + hid_desc->wDescriptorLength); + error = -EIO; + goto err_free_urb; + } + + /* Now we parse the report */ + parse_hid_report_descriptor(gtco, report, result); + + /* Now we delete it */ + kfree(report); + + /* Create a device file node */ + usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); + strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); + + /* Set Input device functions */ + input_dev->open = gtco_input_open; + input_dev->close = gtco_input_close; + + /* Set input device information */ + input_dev->name = "GTCO_CalComp"; + input_dev->phys = gtco->usbpath; + + input_set_drvdata(input_dev, gtco); + + /* Now set up all the input device capabilities */ + gtco_setup_caps(input_dev); + + /* Set input device required ID information */ + usb_to_input_id(gtco->usbdev, &input_dev->id); + input_dev->dev.parent = &usbinterface->dev; + + /* Setup the URB, it will be posted later on open of input device */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + usb_fill_int_urb(gtco->urbinfo, + gtco->usbdev, + usb_rcvintpipe(gtco->usbdev, + endpoint->bEndpointAddress), + gtco->buffer, + REPORT_MAX_SIZE, + gtco_urb_callback, + gtco, + endpoint->bInterval); + + gtco->urbinfo->transfer_dma = gtco->buf_dma; + gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* Save gtco pointer in USB interface gtco */ + usb_set_intfdata(usbinterface, gtco); + + /* All done, now register the input device */ + error = input_register_device(input_dev); + if (error) + goto err_free_urb; + + return 0; + + err_free_urb: + usb_free_urb(gtco->urbinfo); + err_free_buf: + usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, + gtco->buffer, gtco->buf_dma); + err_free_devs: + kfree(report); + input_free_device(input_dev); + kfree(gtco); + return error; +} + +/* + * This function is a standard USB function called when the USB device + * is disconnected. We will get rid of the URV, de-register the input + * device, and free up allocated memory + */ +static void gtco_disconnect(struct usb_interface *interface) +{ + /* Grab private device ptr */ + struct gtco *gtco = usb_get_intfdata(interface); + + /* Now reverse all the registration stuff */ + if (gtco) { + input_unregister_device(gtco->inputdevice); + usb_kill_urb(gtco->urbinfo); + usb_free_urb(gtco->urbinfo); + usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, + gtco->buffer, gtco->buf_dma); + kfree(gtco); + } + + info("gtco driver disconnected"); +} + +/* STANDARD MODULE LOAD ROUTINES */ + +static struct usb_driver gtco_driverinfo_table = { + .name = "gtco", + .id_table = gtco_usbid_table, + .probe = gtco_probe, + .disconnect = gtco_disconnect, +}; + +/* + * Register this module with the USB subsystem + */ +static int __init gtco_init(void) +{ + int error; + + error = usb_register(>co_driverinfo_table); + if (error) { + err("usb_register() failed rc=0x%x", error); + return error; + } + + printk("GTCO usb driver version: %s", GTCO_VERSION); + return 0; +} + +/* + * Deregister this module with the USB subsystem + */ +static void __exit gtco_exit(void) +{ + usb_deregister(>co_driverinfo_table); +} + +module_init(gtco_init); +module_exit(gtco_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c new file mode 100644 index 0000000..91e6d00 --- /dev/null +++ b/drivers/input/tablet/kbtab.c @@ -0,0 +1,226 @@ +#include +#include +#include +#include +#include +#include + +/* + * Version Information + * v0.0.1 - Original, extremely basic version, 2.4.xx only + * v0.0.2 - Updated, works with 2.5.62 and 2.4.20; + * - added pressure-threshold modules param code from + * Alex Perry + */ + +#define DRIVER_VERSION "v0.0.2" +#define DRIVER_AUTHOR "Josh Myer " +#define DRIVER_DESC "USB KB Gear JamStudio Tablet driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_KBGEAR 0x084e + +static int kb_pressure_click = 0x10; +module_param(kb_pressure_click, int, 0); +MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); + +struct kbtab { + unsigned char *data; + dma_addr_t data_dma; + struct input_dev *dev; + struct usb_device *usbdev; + struct urb *irq; + int x, y; + int button; + int pressure; + __u32 serial[2]; + char phys[32]; +}; + +static void kbtab_irq(struct urb *urb) +{ + struct kbtab *kbtab = urb->context; + unsigned char *data = kbtab->data; + struct input_dev *dev = kbtab->dev; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + kbtab->x = le16_to_cpu(get_unaligned((__le16 *) &data[1])); + kbtab->y = le16_to_cpu(get_unaligned((__le16 *) &data[3])); + + kbtab->pressure = (data[5]); + + input_report_key(dev, BTN_TOOL_PEN, 1); + + input_report_abs(dev, ABS_X, kbtab->x); + input_report_abs(dev, ABS_Y, kbtab->y); + + /*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/ + input_report_key(dev, BTN_RIGHT, data[0] & 0x02); + + if (-1 == kb_pressure_click) { + input_report_abs(dev, ABS_PRESSURE, kbtab->pressure); + } else { + input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0); + }; + + input_sync(dev); + + exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +static struct usb_device_id kbtab_ids[] = { + { USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 }, + { } +}; + +MODULE_DEVICE_TABLE(usb, kbtab_ids); + +static int kbtab_open(struct input_dev *dev) +{ + struct kbtab *kbtab = input_get_drvdata(dev); + + kbtab->irq->dev = kbtab->usbdev; + if (usb_submit_urb(kbtab->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void kbtab_close(struct input_dev *dev) +{ + struct kbtab *kbtab = input_get_drvdata(dev); + + usb_kill_urb(kbtab->irq); +} + +static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct kbtab *kbtab; + struct input_dev *input_dev; + int error = -ENOMEM; + + kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbtab || !input_dev) + goto fail1; + + kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma); + if (!kbtab->data) + goto fail1; + + kbtab->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!kbtab->irq) + goto fail2; + + kbtab->usbdev = dev; + kbtab->dev = input_dev; + + usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); + strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys)); + + input_dev->name = "KB Gear Tablet"; + input_dev->phys = kbtab->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, kbtab); + + input_dev->open = kbtab_open; + input_dev->close = kbtab_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); + + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + usb_fill_int_urb(kbtab->irq, dev, + usb_rcvintpipe(dev, endpoint->bEndpointAddress), + kbtab->data, 8, + kbtab_irq, kbtab, endpoint->bInterval); + kbtab->irq->transfer_dma = kbtab->data_dma; + kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = input_register_device(kbtab->dev); + if (error) + goto fail3; + + usb_set_intfdata(intf, kbtab); + + return 0; + + fail3: usb_free_urb(kbtab->irq); + fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); + fail1: input_free_device(input_dev); + kfree(kbtab); + return error; +} + +static void kbtab_disconnect(struct usb_interface *intf) +{ + struct kbtab *kbtab = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + if (kbtab) { + usb_kill_urb(kbtab->irq); + input_unregister_device(kbtab->dev); + usb_free_urb(kbtab->irq); + usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma); + kfree(kbtab); + } +} + +static struct usb_driver kbtab_driver = { + .name = "kbtab", + .probe = kbtab_probe, + .disconnect = kbtab_disconnect, + .id_table = kbtab_ids, +}; + +static int __init kbtab_init(void) +{ + int retval; + retval = usb_register(&kbtab_driver); + if (retval) + goto out; + info(DRIVER_VERSION ":" DRIVER_DESC); +out: + return retval; +} + +static void __exit kbtab_exit(void) +{ + usb_deregister(&kbtab_driver); +} + +module_init(kbtab_init); +module_exit(kbtab_exit); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h new file mode 100644 index 0000000..ef01a80 --- /dev/null +++ b/drivers/input/tablet/wacom.h @@ -0,0 +1,131 @@ +/* + * drivers/input/tablet/wacom.h + * + * USB Wacom Graphire and Wacom Intuos tablet support + * + * Copyright (c) 2000-2004 Vojtech Pavlik + * Copyright (c) 2000 Andreas Bach Aaen + * Copyright (c) 2000 Clifford Wolf + * Copyright (c) 2000 Sam Mosel + * Copyright (c) 2000 James E. Blair + * Copyright (c) 2000 Daniel Egger + * Copyright (c) 2001 Frederic Lepied + * Copyright (c) 2004 Panagiotis Issaris + * Copyright (c) 2002-2006 Ping Cheng + * + * ChangeLog: + * v0.1 (vp) - Initial release + * v0.2 (aba) - Support for all buttons / combinations + * v0.3 (vp) - Support for Intuos added + * v0.4 (sm) - Support for more Intuos models, menustrip + * relative mode, proximity. + * v0.5 (vp) - Big cleanup, nifty features removed, + * they belong in userspace + * v1.8 (vp) - Submit URB only when operating, moved to CVS, + * use input_report_key instead of report_btn and + * other cleanups + * v1.11 (vp) - Add URB ->dev setting for new kernels + * v1.11 (jb) - Add support for the 4D Mouse & Lens + * v1.12 (de) - Add support for two more inking pen IDs + * v1.14 (vp) - Use new USB device id probing scheme. + * Fix Wacom Graphire mouse wheel + * v1.18 (vp) - Fix mouse wheel direction + * Make mouse relative + * v1.20 (fl) - Report tool id for Intuos devices + * - Multi tools support + * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) + * - Add PL models support + * - Fix Wacom Graphire mouse wheel again + * v1.21 (vp) - Removed protocol descriptions + * - Added MISC_SERIAL for tool serial numbers + * (gb) - Identify version on module load. + * v1.21.1 (fl) - added Graphire2 support + * v1.21.2 (fl) - added Intuos2 support + * - added all the PL ids + * v1.21.3 (fl) - added another eraser id from Neil Okamoto + * - added smooth filter for Graphire from Peri Hankey + * - added PenPartner support from Olaf van Es + * - new tool ids from Ole Martin Bjoerndalen + * v1.29 (pc) - Add support for more tablets + * - Fix pressure reporting + * v1.30 (vp) - Merge 2.4 and 2.5 drivers + * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse + * - Cleanups here and there + * v1.30.1 (pi) - Added Graphire3 support + * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... + * v1.43 (pc) - Added support for Cintiq 21UX + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs + * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 + * - Minor data report fix + * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, + * - where wacom_sys.c deals with system specific code, + * - and wacom_wac.c deals with Wacom specific code + * - Support Intuos3 4x6 + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_H +#define WACOM_H +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.46" +#define DRIVER_AUTHOR "Vojtech Pavlik " +#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_WACOM 0x056a + +struct wacom { + dma_addr_t data_dma; + struct input_dev *dev; + struct usb_device *usbdev; + struct urb *irq; + struct wacom_wac * wacom_wac; + char phys[32]; +}; + +struct wacom_combo { + struct wacom * wacom; + struct urb * urb; +}; + +extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); +extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data); +extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data); +extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data); +extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value); +extern void wacom_input_sync(void *wcombo); +extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern __u16 wacom_le16_to_cpu(unsigned char *data); +extern __u16 wacom_be16_to_cpu(unsigned char *data); +extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id * get_device_table(void); + +#endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c new file mode 100644 index 0000000..83bddef --- /dev/null +++ b/drivers/input/tablet/wacom_sys.c @@ -0,0 +1,318 @@ +/* + * drivers/input/tablet/wacom_sys.c + * + * USB Wacom Graphire and Wacom Intuos tablet support - system specific code + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "wacom.h" +#include "wacom_wac.h" + +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_SET_REPORT 0x09 + +static int usb_get_report(struct usb_interface *intf, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(interface_to_usbdev(intf), + usb_rcvctrlpipe(interface_to_usbdev(intf), 0), + USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 100); +} + +static int usb_set_report(struct usb_interface *intf, unsigned char type, + unsigned char id, void *buf, int size) +{ + return usb_control_msg(interface_to_usbdev(intf), + usb_sndctrlpipe(interface_to_usbdev(intf), 0), + USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, + buf, size, 1000); +} + +static struct input_dev * get_input_dev(struct wacom_combo *wcombo) +{ + return wcombo->wacom->dev; +} + +static void wacom_sys_irq(struct urb *urb) +{ + struct wacom *wacom = urb->context; + struct wacom_combo wcombo; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + wcombo.wacom = wacom; + wcombo.urb = urb; + + if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo)) + input_sync(get_input_dev(&wcombo)); + + exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) +{ + input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); + return; +} + +void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) +{ + input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); + return; +} + +void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) +{ + input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); + return; +} + +void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) +{ + input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); + return; +} + +__u16 wacom_be16_to_cpu(unsigned char *data) +{ + __u16 value; + value = be16_to_cpu(*(__be16 *) data); + return value; +} + +__u16 wacom_le16_to_cpu(unsigned char *data) +{ + __u16 value; + value = le16_to_cpu(*(__le16 *) data); + return value; +} + +void wacom_input_sync(void *wcombo) +{ + input_sync(get_input_dev((struct wacom_combo *)wcombo)); + return; +} + +static int wacom_open(struct input_dev *dev) +{ + struct wacom *wacom = input_get_drvdata(dev); + + wacom->irq->dev = wacom->usbdev; + if (usb_submit_urb(wacom->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void wacom_close(struct input_dev *dev) +{ + struct wacom *wacom = input_get_drvdata(dev); + + usb_kill_urb(wacom->irq); +} + +void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_MSC); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4); +} + +void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); +} + +void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3); + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); +} + +void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); +} + +void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) + | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); +} + +void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); +} + +void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER); +} + +static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct wacom *wacom; + struct wacom_wac *wacom_wac; + struct input_dev *input_dev; + int error = -ENOMEM; + char rep_data[2], limit = 0; + + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev || !wacom_wac) + goto fail1; + + wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); + if (!wacom_wac->data) + goto fail1; + + wacom->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!wacom->irq) + goto fail2; + + wacom->usbdev = dev; + wacom->dev = input_dev; + usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); + strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); + + wacom_wac->features = get_wacom_feature(id); + BUG_ON(wacom_wac->features->pktlen > 10); + + input_dev->name = wacom_wac->features->name; + wacom->wacom_wac = wacom_wac; + usb_to_input_id(dev, &input_dev->id); + + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, wacom); + + input_dev->open = wacom_open; + input_dev->close = wacom_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC); + + wacom_init_input_dev(input_dev, wacom_wac); + + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + usb_fill_int_urb(wacom->irq, dev, + usb_rcvintpipe(dev, endpoint->bEndpointAddress), + wacom_wac->data, wacom_wac->features->pktlen, + wacom_sys_irq, wacom, endpoint->bInterval); + wacom->irq->transfer_dma = wacom->data_dma; + wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = input_register_device(wacom->dev); + if (error) + goto fail3; + + /* Ask the tablet to report tablet data. Repeat until it succeeds */ + do { + rep_data[0] = 2; + rep_data[1] = 2; + usb_set_report(intf, 3, 2, rep_data, 2); + usb_get_report(intf, 3, 2, rep_data, 2); + } while (rep_data[1] != 2 && limit++ < 5); + + usb_set_intfdata(intf, wacom); + return 0; + + fail3: usb_free_urb(wacom->irq); + fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma); + fail1: input_free_device(input_dev); + kfree(wacom); + kfree(wacom_wac); + return error; +} + +static void wacom_disconnect(struct usb_interface *intf) +{ + struct wacom *wacom = usb_get_intfdata (intf); + + usb_set_intfdata(intf, NULL); + if (wacom) { + usb_kill_urb(wacom->irq); + input_unregister_device(wacom->dev); + usb_free_urb(wacom->irq); + usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + kfree(wacom->wacom_wac); + kfree(wacom); + } +} + +static struct usb_driver wacom_driver = { + .name = "wacom", + .probe = wacom_probe, + .disconnect = wacom_disconnect, +}; + +static int __init wacom_init(void) +{ + int result; + wacom_driver.id_table = get_device_table(); + result = usb_register(&wacom_driver); + if (result == 0) + info(DRIVER_VERSION ":" DRIVER_DESC); + return result; +} + +static void __exit wacom_exit(void) +{ + usb_deregister(&wacom_driver); +} + +module_init(wacom_init); +module_exit(wacom_exit); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c new file mode 100644 index 0000000..7661f03 --- /dev/null +++ b/drivers/input/tablet/wacom_wac.c @@ -0,0 +1,675 @@ +/* + * drivers/input/tablet/wacom_wac.c + * + * USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code + * + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include "wacom.h" +#include "wacom_wac.h" + +static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + + switch (data[0]) { + case 1: + if (data[5] & 0x80) { + wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; + wacom_report_key(wcombo, wacom->tool[0], 1); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); + wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127)); + wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); + } else { + wacom_report_key(wcombo, wacom->tool[0], 0); + wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */ + wacom_report_abs(wcombo, ABS_PRESSURE, -1); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + break; + case 2: + wacom_report_key(wcombo, BTN_TOOL_PEN, 1); + wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); + wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); + wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); + break; + default: + printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); + return 0; + } + return 1; +} + +static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int prox, id, pressure; + + if (data[0] != 2) { + dbg("wacom_pl_irq: received unknown report #%d", data[0]); + return 0; + } + + prox = data[1] & 0x40; + + id = ERASER_DEVICE_ID; + if (prox) { + + pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); + if (wacom->features->pressure_max > 255) + pressure = (pressure << 1) | ((data[4] >> 6) & 1); + pressure += (wacom->features->pressure_max + 1) / 2; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (!wacom->tool[0]) { + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + } else { + /* was entered with stylus2 pressed */ + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { + /* report out proximity for previous tool */ + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + wacom->tool[1] = BTN_TOOL_PEN; + return 0; + } + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + id = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */ + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); + wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + + wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08); + wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10); + /* Only allow the stylus2 button to be reported for the pen tool. */ + wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); + } else { + /* report proximity-out of a (valid) tool */ + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + } + wacom_report_key(wcombo, wacom->tool[1], prox); + } + + wacom->tool[0] = prox; /* Save proximity state */ + return 1; +} + +static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int id; + + if (data[0] != 2) { + printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); + return 0; + } + + if (data[1] & 0x04) { + wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08); + id = ERASER_DEVICE_ID; + } else { + wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); + id = STYLUS_DEVICE_ID; + } + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + return 1; +} + +static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int x, y, id, rw; + + if (data[0] != 2) { + dbg("wacom_graphire_irq: received unknown report #%d", data[0]); + return 0; + } + + id = STYLUS_DEVICE_ID; + if (data[1] & 0x80) { /* in prox */ + + switch ((data[1] >> 5) & 3) { + + case 0: /* Pen */ + wacom->tool[0] = BTN_TOOL_PEN; + break; + + case 1: /* Rubber */ + wacom->tool[0] = BTN_TOOL_RUBBER; + id = ERASER_DEVICE_ID; + break; + + case 2: /* Mouse with wheel */ + wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04); + if (wacom->features->type == WACOM_G4) { + rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); + wacom_report_rel(wcombo, REL_WHEEL, -rw); + } else + wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]); + /* fall through */ + + case 3: /* Mouse without wheel */ + wacom->tool[0] = BTN_TOOL_MOUSE; + id = CURSOR_DEVICE_ID; + wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); + wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); + if (wacom->features->type == WACOM_G4) + wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f); + else + wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); + break; + } + x = wacom_le16_to_cpu(&data[2]); + y = wacom_le16_to_cpu(&data[4]); + wacom_report_abs(wcombo, ABS_X, x); + wacom_report_abs(wcombo, ABS_Y, y); + if (wacom->tool[0] != BTN_TOOL_MOUSE) { + wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); + wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); + } + wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + wacom_report_key(wcombo, wacom->tool[0], 1); + } else if (!(data[1] & 0x90)) { + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + if (wacom->tool[0] == BTN_TOOL_MOUSE) { + wacom_report_key(wcombo, BTN_LEFT, 0); + wacom_report_key(wcombo, BTN_RIGHT, 0); + wacom_report_abs(wcombo, ABS_DISTANCE, 0); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + } + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_report_key(wcombo, wacom->tool[0], 0); + } + + /* send pad data */ + if (wacom->features->type == WACOM_G4) { + if (data[7] & 0xf8) { + wacom_input_sync(wcombo); /* sync last event */ + wacom->id[1] = 1; + wacom->serial[1] = (data[7] & 0xf8); + wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); + rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); + wacom_report_rel(wcombo, REL_WHEEL, rw); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); + wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom_input_sync(wcombo); /* sync last event */ + wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_report_abs(wcombo, ABS_MISC, 0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } + } + return 1; +} + +static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + int idx; + + /* tool number */ + idx = data[1] & 0x01; + + /* Enter report */ + if ((data[1] & 0xfc) == 0xc0) { + /* serial number of the tool */ + wacom->serial[idx] = ((data[3] & 0x0f) << 28) + + (data[4] << 20) + (data[5] << 12) + + (data[6] << 4) + (data[7] >> 4); + + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); + switch (wacom->id[idx]) { + case 0x812: /* Inking pen */ + case 0x801: /* Intuos3 Inking pen */ + case 0x012: + wacom->tool[idx] = BTN_TOOL_PENCIL; + break; + case 0x822: /* Pen */ + case 0x842: + case 0x852: + case 0x823: /* Intuos3 Grip Pen */ + case 0x813: /* Intuos3 Classic Pen */ + case 0x885: /* Intuos3 Marker Pen */ + case 0x022: + wacom->tool[idx] = BTN_TOOL_PEN; + break; + case 0x832: /* Stroke pen */ + case 0x032: + wacom->tool[idx] = BTN_TOOL_BRUSH; + break; + case 0x007: /* Mouse 4D and 2D */ + case 0x09c: + case 0x094: + case 0x017: /* Intuos3 2D Mouse */ + wacom->tool[idx] = BTN_TOOL_MOUSE; + break; + case 0x096: /* Lens cursor */ + case 0x097: /* Intuos3 Lens cursor */ + wacom->tool[idx] = BTN_TOOL_LENS; + break; + case 0x82a: /* Eraser */ + case 0x85a: + case 0x91a: + case 0xd1a: + case 0x0fa: + case 0x82b: /* Intuos3 Grip Pen Eraser */ + case 0x81b: /* Intuos3 Classic Pen Eraser */ + case 0x91b: /* Intuos3 Airbrush Eraser */ + wacom->tool[idx] = BTN_TOOL_RUBBER; + break; + case 0xd12: + case 0x912: + case 0x112: + case 0x913: /* Intuos3 Airbrush */ + wacom->tool[idx] = BTN_TOOL_AIRBRUSH; + break; + default: /* Unknown tool */ + wacom->tool[idx] = BTN_TOOL_PEN; + } + return 1; + } + + /* Exit report */ + if ((data[1] & 0xfe) == 0x80) { + wacom_report_abs(wcombo, ABS_X, 0); + wacom_report_abs(wcombo, ABS_Y, 0); + wacom_report_abs(wcombo, ABS_DISTANCE, 0); + if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { + wacom_report_key(wcombo, BTN_LEFT, 0); + wacom_report_key(wcombo, BTN_MIDDLE, 0); + wacom_report_key(wcombo, BTN_RIGHT, 0); + wacom_report_key(wcombo, BTN_SIDE, 0); + wacom_report_key(wcombo, BTN_EXTRA, 0); + wacom_report_abs(wcombo, ABS_THROTTLE, 0); + wacom_report_abs(wcombo, ABS_RZ, 0); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_abs(wcombo, ABS_TILT_X, 0); + wacom_report_abs(wcombo, ABS_TILT_Y, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + wacom_report_abs(wcombo, ABS_WHEEL, 0); + } + wacom_report_key(wcombo, wacom->tool[idx], 0); + wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 2; + } + return 0; +} + +static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + unsigned int t; + + /* general pen packet */ + if ((data[1] & 0xb8) == 0xa0) { + t = (data[6] << 2) | ((data[7] >> 6) & 3); + wacom_report_abs(wcombo, ABS_PRESSURE, t); + wacom_report_abs(wcombo, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4); + wacom_report_key(wcombo, BTN_TOUCH, t > 10); + } + + /* airbrush second packet */ + if ((data[1] & 0xbc) == 0xb4) { + wacom_report_abs(wcombo, ABS_WHEEL, + (data[6] << 2) | ((data[7] >> 6) & 3)); + wacom_report_abs(wcombo, ABS_TILT_X, + ((data[7] << 1) & 0x7e) | (data[8] >> 7)); + wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); + } + return; +} + +static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) +{ + unsigned char *data = wacom->data; + unsigned int t; + int idx, result; + + if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) { + dbg("wacom_intuos_irq: received unknown report #%d", data[0]); + return 0; + } + + /* tool number */ + idx = data[1] & 0x01; + + /* pad packets. Works as a second tool and is always in prox */ + if (data[0] == 12) { + /* initiate the pad as a device */ + if (wacom->tool[1] != BTN_TOOL_FINGER) + wacom->tool[1] = BTN_TOOL_FINGER; + + wacom_report_key(wcombo, BTN_0, (data[5] & 0x01)); + wacom_report_key(wcombo, BTN_1, (data[5] & 0x02)); + wacom_report_key(wcombo, BTN_2, (data[5] & 0x04)); + wacom_report_key(wcombo, BTN_3, (data[5] & 0x08)); + wacom_report_key(wcombo, BTN_4, (data[6] & 0x01)); + wacom_report_key(wcombo, BTN_5, (data[6] & 0x02)); + wacom_report_key(wcombo, BTN_6, (data[6] & 0x04)); + wacom_report_key(wcombo, BTN_7, (data[6] & 0x08)); + wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); + wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); + + if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | + data[2] | (data[3] & 0x1f) | data[4]) + wacom_report_key(wcombo, wacom->tool[1], 1); + else + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff); + return 1; + } + + /* process in/out prox events */ + result = wacom_intuos_inout(wacom, wcombo); + if (result) + return result-1; + + /* Only large I3 and I1 & I2 support Lense Cursor */ + if((wacom->tool[idx] == BTN_TOOL_LENS) + && ((wacom->features->type == INTUOS3) + || (wacom->features->type == INTUOS3S))) + return 0; + + /* Cintiq doesn't send data when RDY bit isn't set */ + if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) + return 0; + + if (wacom->features->type >= INTUOS3S) { + wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); + wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); + wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); + } + + /* process general packets */ + wacom_intuos_general(wacom, wcombo); + + /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */ + if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) { + + if (data[1] & 0x02) { + /* Rotation packet */ + if (wacom->features->type >= INTUOS3S) { + /* I3 marker pen rotation reported as wheel + * due to valuator limitation + */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : + ((t-1) / 2 + 450)) : (450 - t / 2) ; + wacom_report_abs(wcombo, ABS_WHEEL, t); + } else { + /* 4D mouse rotation packet */ + t = (data[6] << 3) | ((data[7] >> 5) & 7); + wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ? + ((t - 1) / 2) : -t / 2); + } + + } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) { + /* 4D mouse packet */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); + + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x20); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x10); + t = (data[6] << 2) | ((data[7] >> 6) & 3); + wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); + + } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { + /* 2D mouse packet */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x04); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x10); + wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01) + - ((data[8] & 0x02) >> 1)); + + /* I3 2D mouse side buttons */ + if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) { + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20); + } + + } else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) { + /* Lens cursor packets */ + wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); + wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); + wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); + wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x10); + wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x08); + } + } + + wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */ + wacom_report_key(wcombo, wacom->tool[idx], 1); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); + return 1; +} + +int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) +{ + switch (wacom_wac->features->type) { + case PENPARTNER: + return (wacom_penpartner_irq(wacom_wac, wcombo)); + break; + case PL: + return (wacom_pl_irq(wacom_wac, wcombo)); + break; + case WACOM_G4: + case GRAPHIRE: + return (wacom_graphire_irq(wacom_wac, wcombo)); + break; + case PTU: + return (wacom_ptu_irq(wacom_wac, wcombo)); + break; + case INTUOS: + case INTUOS3S: + case INTUOS3: + case INTUOS3L: + case CINTIQ: + return (wacom_intuos_irq(wacom_wac, wcombo)); + break; + default: + return 0; + } + return 0; +} + +void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + switch (wacom_wac->features->type) { + case WACOM_G4: + input_dev_g4(input_dev, wacom_wac); + /* fall through */ + case GRAPHIRE: + input_dev_g(input_dev, wacom_wac); + break; + case INTUOS3: + case INTUOS3L: + case CINTIQ: + input_dev_i3(input_dev, wacom_wac); + /* fall through */ + case INTUOS3S: + input_dev_i3s(input_dev, wacom_wac); + case INTUOS: + input_dev_i(input_dev, wacom_wac); + break; + case PL: + case PTU: + input_dev_pl(input_dev, wacom_wac); + break; + case PENPARTNER: + input_dev_pt(input_dev, wacom_wac); + break; + } + return; +} + +static struct wacom_features wacom_features[] = { + { "Wacom Penpartner", 7, 5040, 3780, 255, 0, PENPARTNER }, + { "Wacom Graphire", 8, 10206, 7422, 511, 63, GRAPHIRE }, + { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 63, GRAPHIRE }, + { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 63, GRAPHIRE }, + { "Wacom Graphire3", 8, 10208, 7424, 511, 63, GRAPHIRE }, + { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, + { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, + { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, + { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, + { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, + { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, + { "Wacom PL400", 8, 5408, 4056, 255, 0, PL }, + { "Wacom PL500", 8, 6144, 4608, 255, 0, PL }, + { "Wacom PL600", 8, 6126, 4604, 255, 0, PL }, + { "Wacom PL600SX", 8, 6260, 5016, 255, 0, PL }, + { "Wacom PL550", 8, 6144, 4608, 511, 0, PL }, + { "Wacom PL800", 8, 7220, 5780, 511, 0, PL }, + { "Wacom PL700", 8, 6758, 5406, 511, 0, PL }, + { "Wacom PL510", 8, 6282, 4762, 511, 0, PL }, + { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, + { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, + { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, + { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, + { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, + { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, + { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, + { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 63, INTUOS3S }, + { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 63, INTUOS3 }, + { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 63, INTUOS3 }, + { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L }, + { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L }, + { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, + { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, + { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, + { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, + { } +}; + +static struct usb_device_id wacom_ids[] = { + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, + { } +}; + +const struct usb_device_id * get_device_table(void) { + const struct usb_device_id * id_table = wacom_ids; + return id_table; +} + +struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { + int index = id - wacom_ids; + struct wacom_features *wf = &wacom_features[index]; + return wf; +} + +MODULE_DEVICE_TABLE(usb, wacom_ids); diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h new file mode 100644 index 0000000..a5e12e8 --- /dev/null +++ b/drivers/input/tablet/wacom_wac.h @@ -0,0 +1,49 @@ +/* + * drivers/input/tablet/wacom_wac.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef WACOM_WAC_H +#define WACOM_WAC_H + +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A +#define PAD_DEVICE_ID 0x0F + +enum { + PENPARTNER = 0, + GRAPHIRE, + WACOM_G4, + PTU, + PL, + INTUOS, + INTUOS3S, + INTUOS3, + INTUOS3L, + CINTIQ, + MAX_TYPE +}; + +struct wacom_features { + char *name; + int pktlen; + int x_max; + int y_max; + int pressure_max; + int distance_max; + int type; +}; + +struct wacom_wac { + unsigned char *data; + int tool[2]; + int id[2]; + __u32 serial[2]; + struct wacom_features *features; +}; + +#endif diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index f5de58a..f786566 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -23,13 +23,9 @@ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ -obj-$(CONFIG_USB_ACECAD) += input/ -obj-$(CONFIG_USB_AIPTEK) += input/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ -obj-$(CONFIG_USB_KBTAB) += input/ obj-$(CONFIG_USB_MTOUCH) += input/ obj-$(CONFIG_USB_POWERMATE) += input/ -obj-$(CONFIG_USB_WACOM) += input/ obj-$(CONFIG_USB_XPAD) += input/ obj-$(CONFIG_USB_CATC) += net/ diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index a792e42..86cad90 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -4,54 +4,6 @@ comment "USB Input Devices" depends on USB -config USB_AIPTEK - tristate "Aiptek 6000U/8000U tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Aiptek 6000U - or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called aiptek. - -config USB_WACOM - tristate "Wacom Intuos/Graphire tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Wacom Intuos - or Graphire tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called wacom. - -config USB_ACECAD - tristate "Acecad Flair tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Acecad Flair - tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called acecad. - -config USB_KBTAB - tristate "KB Gear JamStudio tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the KB Gear - JamStudio tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called kbtab. - config USB_POWERMATE tristate "Griffin PowerMate and Contour Jog support" depends on USB && INPUT @@ -211,15 +163,3 @@ config USB_APPLETOUCH To compile this driver as a module, choose M here: the module will be called appletouch. - -config USB_GTCO - tristate "GTCO CalComp/InterWrite USB Support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the USB version of the GTCO - CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called gtco. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 284a073..a9e9b2f 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -2,22 +2,14 @@ # Makefile for the USB input drivers # -# Multipart objects. -wacom-objs := wacom_wac.o wacom_sys.o - -obj-$(CONFIG_USB_AIPTEK) += aiptek.o obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_USB_KBTAB) += kbtab.o obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_USB_TOUCHSCREEN) += usbtouchscreen.o obj-$(CONFIG_USB_POWERMATE) += powermate.o -obj-$(CONFIG_USB_WACOM) += wacom.o -obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o -obj-$(CONFIG_USB_GTCO) += gtco.o ifeq ($(CONFIG_USB_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c deleted file mode 100644 index dd23104..0000000 --- a/drivers/usb/input/acecad.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 2001-2005 Edouard TISSERANT - * Copyright (c) 2004-2005 Stephane VOLTZ - * - * USB Acecad "Acecad Flair" tablet support - * - * Changelog: - * v3.2 - Added sysfs support - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v3.2" -#define DRIVER_DESC "USB Acecad Flair tablet driver" -#define DRIVER_LICENSE "GPL" -#define DRIVER_AUTHOR "Edouard TISSERANT " - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -#define USB_VENDOR_ID_ACECAD 0x0460 -#define USB_DEVICE_ID_FLAIR 0x0004 -#define USB_DEVICE_ID_302 0x0008 - -struct usb_acecad { - char name[128]; - char phys[64]; - struct usb_device *usbdev; - struct input_dev *input; - struct urb *irq; - - unsigned char *data; - dma_addr_t data_dma; -}; - -static void usb_acecad_irq(struct urb *urb) -{ - struct usb_acecad *acecad = urb->context; - unsigned char *data = acecad->data; - struct input_dev *dev = acecad->input; - int prox, status; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto resubmit; - } - - prox = (data[0] & 0x04) >> 2; - input_report_key(dev, BTN_TOOL_PEN, prox); - - if (prox) { - int x = data[1] | (data[2] << 8); - int y = data[3] | (data[4] << 8); - /* Pressure should compute the same way for flair and 302 */ - int pressure = data[5] | (data[6] << 8); - int touch = data[0] & 0x01; - int stylus = (data[0] & 0x10) >> 4; - int stylus2 = (data[0] & 0x20) >> 5; - input_report_abs(dev, ABS_X, x); - input_report_abs(dev, ABS_Y, y); - input_report_abs(dev, ABS_PRESSURE, pressure); - input_report_key(dev, BTN_TOUCH, touch); - input_report_key(dev, BTN_STYLUS, stylus); - input_report_key(dev, BTN_STYLUS2, stylus2); - } - - /* event termination */ - input_sync(dev); - -resubmit: - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) - err("can't resubmit intr, %s-%s/input0, status %d", - acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status); -} - -static int usb_acecad_open(struct input_dev *dev) -{ - struct usb_acecad *acecad = input_get_drvdata(dev); - - acecad->irq->dev = acecad->usbdev; - if (usb_submit_urb(acecad->irq, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void usb_acecad_close(struct input_dev *dev) -{ - struct usb_acecad *acecad = input_get_drvdata(dev); - - usb_kill_urb(acecad->irq); -} - -static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_host_interface *interface = intf->cur_altsetting; - struct usb_endpoint_descriptor *endpoint; - struct usb_acecad *acecad; - struct input_dev *input_dev; - int pipe, maxp; - int err = -ENOMEM; - - if (interface->desc.bNumEndpoints != 1) - return -ENODEV; - - endpoint = &interface->endpoint[0].desc; - - if (!usb_endpoint_is_int_in(endpoint)) - return -ENODEV; - - pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); - maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - - acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!acecad || !input_dev) { - err = -ENOMEM; - goto fail1; - } - - acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma); - if (!acecad->data) { - err= -ENOMEM; - goto fail1; - } - - acecad->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!acecad->irq) { - err = -ENOMEM; - goto fail2; - } - - acecad->usbdev = dev; - acecad->input = input_dev; - - if (dev->manufacturer) - strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); - - if (dev->product) { - if (dev->manufacturer) - strlcat(acecad->name, " ", sizeof(acecad->name)); - strlcat(acecad->name, dev->product, sizeof(acecad->name)); - } - - usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); - strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); - - input_dev->name = acecad->name; - input_dev->phys = acecad->phys; - usb_to_input_id(dev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, acecad); - - input_dev->open = usb_acecad_open; - input_dev->close = usb_acecad_close; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); - - switch (id->driver_info) { - case 0: - input_dev->absmax[ABS_X] = 5000; - input_dev->absmax[ABS_Y] = 3750; - input_dev->absmax[ABS_PRESSURE] = 512; - if (!strlen(acecad->name)) - snprintf(acecad->name, sizeof(acecad->name), - "USB Acecad Flair Tablet %04x:%04x", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - break; - case 1: - input_dev->absmax[ABS_X] = 3000; - input_dev->absmax[ABS_Y] = 2250; - input_dev->absmax[ABS_PRESSURE] = 1024; - if (!strlen(acecad->name)) - snprintf(acecad->name, sizeof(acecad->name), - "USB Acecad 302 Tablet %04x:%04x", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - break; - } - - input_dev->absfuzz[ABS_X] = 4; - input_dev->absfuzz[ABS_Y] = 4; - - usb_fill_int_urb(acecad->irq, dev, pipe, - acecad->data, maxp > 8 ? 8 : maxp, - usb_acecad_irq, acecad, endpoint->bInterval); - acecad->irq->transfer_dma = acecad->data_dma; - acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - err = input_register_device(acecad->input); - if (err) - goto fail2; - - usb_set_intfdata(intf, acecad); - - return 0; - - fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma); - fail1: input_free_device(input_dev); - kfree(acecad); - return err; -} - -static void usb_acecad_disconnect(struct usb_interface *intf) -{ - struct usb_acecad *acecad = usb_get_intfdata(intf); - - usb_set_intfdata(intf, NULL); - if (acecad) { - usb_kill_urb(acecad->irq); - input_unregister_device(acecad->input); - usb_free_urb(acecad->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma); - kfree(acecad); - } -} - -static struct usb_device_id usb_acecad_id_table [] = { - { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 }, - { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 }, - { } -}; - -MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); - -static struct usb_driver usb_acecad_driver = { - .name = "usb_acecad", - .probe = usb_acecad_probe, - .disconnect = usb_acecad_disconnect, - .id_table = usb_acecad_id_table, -}; - -static int __init usb_acecad_init(void) -{ - int result = usb_register(&usb_acecad_driver); - if (result == 0) - info(DRIVER_VERSION ":" DRIVER_DESC); - return result; -} - -static void __exit usb_acecad_exit(void) -{ - usb_deregister(&usb_acecad_driver); -} - -module_init(usb_acecad_init); -module_exit(usb_acecad_exit); diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c deleted file mode 100644 index cc0a498..0000000 --- a/drivers/usb/input/aiptek.c +++ /dev/null @@ -1,2236 +0,0 @@ -/* - * Native support for the Aiptek HyperPen USB Tablets - * (4000U/5000U/6000U/8000U/12000U) - * - * Copyright (c) 2001 Chris Atenasio - * Copyright (c) 2002-2004 Bryan W. Headley - * - * based on wacom.c by - * Vojtech Pavlik - * Andreas Bach Aaen - * Clifford Wolf - * Sam Mosel - * James E. Blair - * Daniel Egger - * - * Many thanks to Oliver Kuechemann for his support. - * - * ChangeLog: - * v0.1 - Initial release - * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley) - * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002) - * Released to Linux 2.4.19 and 2.5.x - * v0.4 - Rewrote substantial portions of the code to deal with - * corrected control sequences, timing, dynamic configuration, - * support of 6000U - 12000U, procfs, and macro key support - * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley) - * v1.0 - Added support for diagnostic messages, count of messages - * received from URB - Mar-8-2003, Bryan W. Headley - * v1.1 - added support for tablet resolution, changed DV and proximity - * some corrections - Jun-22-2003, martin schneebacher - * - Added support for the sysfs interface, deprecating the - * procfs interface for 2.5.x kernel. Also added support for - * Wheel command. Bryan W. Headley July-15-2003. - * v1.2 - Reworked jitter timer as a kernel thread. - * Bryan W. Headley November-28-2003/Jan-10-2004. - * v1.3 - Repaired issue of kernel thread going nuts on single-processor - * machines, introduced programmableDelay as a command line - * parameter. Feb 7 2004, Bryan W. Headley. - * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of - * Rene van Paassen. Added reporting of physical pointer device - * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know - * for reports 1, 6.) - * what physical device reports for reports 1, 6.) Also enabled - * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser". - * Feb 20, 2004, Bryan W. Headley. - * v1.5 - Added previousJitterable, so we don't do jitter delay when the - * user is holding a button down for periods of time. - * - * NOTE: - * This kernel driver is augmented by the "Aiptek" XFree86 input - * driver for your X server, as well as the Gaiptek GUI Front-end - * "Tablet Manager". - * These three products are highly interactive with one another, - * so therefore it's easier to document them all as one subsystem. - * Please visit the project's "home page", located at, - * http://aiptektablet.sourceforge.net. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v1.5 (May-15-2004)" -#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio" -#define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" - -/* - * Aiptek status packet: - * - * (returned as Report 1 - relative coordinates from mouse and stylus) - * - * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 0 0 1 - * byte1 0 0 0 0 0 BS2 BS Tip - * byte2 X7 X6 X5 X4 X3 X2 X1 X0 - * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * - * (returned as Report 2 - absolute coordinates from the stylus) - * - * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 0 1 0 - * byte1 X7 X6 X5 X4 X3 X2 X1 X0 - * byte2 X15 X14 X13 X12 X11 X10 X9 X8 - * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 - * byte5 * * * BS2 BS1 Tip IR DV - * byte6 P7 P6 P5 P4 P3 P2 P1 P0 - * byte7 P15 P14 P13 P12 P11 P10 P9 P8 - * - * (returned as Report 3 - absolute coordinates from the mouse) - * - * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 0 1 0 - * byte1 X7 X6 X5 X4 X3 X2 X1 X0 - * byte2 X15 X14 X13 X12 X11 X10 X9 X8 - * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 - * byte5 * * * BS2 BS1 Tip IR DV - * byte6 P7 P6 P5 P4 P3 P2 P1 P0 - * byte7 P15 P14 P13 P12 P11 P10 P9 P8 - * - * (returned as Report 4 - macrokeys from the stylus) - * - * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 1 0 0 - * byte1 0 0 0 BS2 BS Tip IR DV - * byte2 0 0 0 0 0 0 1 0 - * byte3 0 0 0 K4 K3 K2 K1 K0 - * byte4 P7 P6 P5 P4 P3 P2 P1 P0 - * byte5 P15 P14 P13 P12 P11 P10 P9 P8 - * - * (returned as Report 5 - macrokeys from the mouse) - * - * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 1 0 0 - * byte1 0 0 0 BS2 BS Tip IR DV - * byte2 0 0 0 0 0 0 1 0 - * byte3 0 0 0 K4 K3 K2 K1 K0 - * byte4 P7 P6 P5 P4 P3 P2 P1 P0 - * byte5 P15 P14 P13 P12 P11 P10 P9 P8 - * - * IR: In Range = Proximity on - * DV = Data Valid - * BS = Barrel Switch (as in, macro keys) - * BS2 also referred to as Tablet Pick - * - * Command Summary: - * - * Use report_type CONTROL (3) - * Use report_id 2 - * - * Command/Data Description Return Bytes Return Value - * 0x10/0x00 SwitchToMouse 0 - * 0x10/0x01 SwitchToTablet 0 - * 0x18/0x04 SetResolution 0 - * 0x12/0xFF AutoGainOn 0 - * 0x17/0x00 FilterOn 0 - * 0x01/0x00 GetXExtension 2 MaxX - * 0x01/0x01 GetYExtension 2 MaxY - * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE - * 0x03/0x00 GetODMCode 2 ODMCode - * 0x08/0x00 GetPressureLevels 2 =512 - * 0x04/0x00 GetFirmwareVersion 2 Firmware Version - * 0x11/0x02 EnableMacroKeys 0 - * - * To initialize the tablet: - * - * (1) Send Resolution500LPI (Command) - * (2) Query for Model code (Option Report) - * (3) Query for ODM code (Option Report) - * (4) Query for firmware (Option Report) - * (5) Query for GetXExtension (Option Report) - * (6) Query for GetYExtension (Option Report) - * (7) Query for GetPressureLevels (Option Report) - * (8) SwitchToTablet for Absolute coordinates, or - * SwitchToMouse for Relative coordinates (Command) - * (9) EnableMacroKeys (Command) - * (10) FilterOn (Command) - * (11) AutoGainOn (Command) - * - * (Step 9 can be omitted, but you'll then have no function keys.) - */ - -#define USB_VENDOR_ID_AIPTEK 0x08ca -#define USB_REQ_GET_REPORT 0x01 -#define USB_REQ_SET_REPORT 0x09 - - /* PointerMode codes - */ -#define AIPTEK_POINTER_ONLY_MOUSE_MODE 0 -#define AIPTEK_POINTER_ONLY_STYLUS_MODE 1 -#define AIPTEK_POINTER_EITHER_MODE 2 - -#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \ - (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \ - a == AIPTEK_POINTER_EITHER_MODE) -#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \ - (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \ - a == AIPTEK_POINTER_EITHER_MODE) - - /* CoordinateMode code - */ -#define AIPTEK_COORDINATE_RELATIVE_MODE 0 -#define AIPTEK_COORDINATE_ABSOLUTE_MODE 1 - - /* XTilt and YTilt values - */ -#define AIPTEK_TILT_MIN (-128) -#define AIPTEK_TILT_MAX 127 -#define AIPTEK_TILT_DISABLE (-10101) - - /* Wheel values - */ -#define AIPTEK_WHEEL_MIN 0 -#define AIPTEK_WHEEL_MAX 1024 -#define AIPTEK_WHEEL_DISABLE (-10101) - - /* ToolCode values, which BTW are 0x140 .. 0x14f - * We have things set up such that if TOOL_BUTTON_FIRED_BIT is - * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx. - * - * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will - * get reset. - */ -#define TOOL_BUTTON(x) ((x) & 0x14f) -#define TOOL_BUTTON_FIRED(x) ((x) & 0x200) -#define TOOL_BUTTON_FIRED_BIT 0x200 - /* toolMode codes - */ -#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN -#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN -#define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL -#define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH -#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH -#define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER -#define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE -#define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS - - /* Diagnostic message codes - */ -#define AIPTEK_DIAGNOSTIC_NA 0 -#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1 -#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2 -#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3 - - /* Time to wait (in ms) to help mask hand jittering - * when pressing the stylus buttons. - */ -#define AIPTEK_JITTER_DELAY_DEFAULT 50 - - /* Time to wait (in ms) in-between sending the tablet - * a command and beginning the process of reading the return - * sequence from the tablet. - */ -#define AIPTEK_PROGRAMMABLE_DELAY_25 25 -#define AIPTEK_PROGRAMMABLE_DELAY_50 50 -#define AIPTEK_PROGRAMMABLE_DELAY_100 100 -#define AIPTEK_PROGRAMMABLE_DELAY_200 200 -#define AIPTEK_PROGRAMMABLE_DELAY_300 300 -#define AIPTEK_PROGRAMMABLE_DELAY_400 400 -#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400 - - /* Mouse button programming - */ -#define AIPTEK_MOUSE_LEFT_BUTTON 0x01 -#define AIPTEK_MOUSE_RIGHT_BUTTON 0x02 -#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04 - - /* Stylus button programming - */ -#define AIPTEK_STYLUS_LOWER_BUTTON 0x08 -#define AIPTEK_STYLUS_UPPER_BUTTON 0x10 - - /* Length of incoming packet from the tablet - */ -#define AIPTEK_PACKET_LENGTH 8 - - /* We report in EV_MISC both the proximity and - * whether the report came from the stylus, tablet mouse - * or "unknown" -- Unknown when the tablet is in relative - * mode, because we only get report 1's. - */ -#define AIPTEK_REPORT_TOOL_UNKNOWN 0x10 -#define AIPTEK_REPORT_TOOL_STYLUS 0x20 -#define AIPTEK_REPORT_TOOL_MOUSE 0x40 - -static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT; -static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT; - -struct aiptek_features { - int odmCode; /* Tablet manufacturer code */ - int modelCode; /* Tablet model code (not unique) */ - int firmwareCode; /* prom/eeprom version */ - char usbPath[64 + 1]; /* device's physical usb path */ - char inputPath[64 + 1]; /* input device path */ -}; - -struct aiptek_settings { - int pointerMode; /* stylus-, mouse-only or either */ - int coordinateMode; /* absolute/relative coords */ - int toolMode; /* pen, pencil, brush, etc. tool */ - int xTilt; /* synthetic xTilt amount */ - int yTilt; /* synthetic yTilt amount */ - int wheel; /* synthetic wheel amount */ - int stylusButtonUpper; /* stylus upper btn delivers... */ - int stylusButtonLower; /* stylus lower btn delivers... */ - int mouseButtonLeft; /* mouse left btn delivers... */ - int mouseButtonMiddle; /* mouse middle btn delivers... */ - int mouseButtonRight; /* mouse right btn delivers... */ - int programmableDelay; /* delay for tablet programming */ - int jitterDelay; /* delay for hand jittering */ -}; - -struct aiptek { - struct input_dev *inputdev; /* input device struct */ - struct usb_device *usbdev; /* usb device struct */ - struct urb *urb; /* urb for incoming reports */ - dma_addr_t data_dma; /* our dma stuffage */ - struct aiptek_features features; /* tablet's array of features */ - struct aiptek_settings curSetting; /* tablet's current programmable */ - struct aiptek_settings newSetting; /* ... and new param settings */ - unsigned int ifnum; /* interface number for IO */ - int diagnostic; /* tablet diagnostic codes */ - unsigned long eventCount; /* event count */ - int inDelay; /* jitter: in jitter delay? */ - unsigned long endDelay; /* jitter: time when delay ends */ - int previousJitterable; /* jitterable prev value */ - unsigned char *data; /* incoming packet data */ -}; - -/* - * Permit easy lookup of keyboard events to send, versus - * the bitmap which comes from the tablet. This hides the - * issue that the F_keys are not sequentially numbered. - */ -static const int macroKeyEvents[] = { - KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, - KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, - KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, - KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, - KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO, - KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0 -}; - -/*********************************************************************** - * Relative reports deliver values in 2's complement format to - * deal with negative offsets. - */ -static int aiptek_convert_from_2s_complement(unsigned char c) -{ - int ret; - unsigned char b = c; - int negate = 0; - - if ((b & 0x80) != 0) { - b = ~b; - b--; - negate = 1; - } - ret = b; - ret = (negate == 1) ? -ret : ret; - return ret; -} - -/*********************************************************************** - * aiptek_irq can receive one of six potential reports. - * The documentation for each is in the body of the function. - * - * The tablet reports on several attributes per invocation of - * aiptek_irq. Because the Linux Input Event system allows the - * transmission of ONE attribute per input_report_xxx() call, - * collation has to be done on the other end to reconstitute - * a complete tablet report. Further, the number of Input Event reports - * submitted varies, depending on what USB report type, and circumstance. - * To deal with this, EV_MSC is used to indicate an 'end-of-report' - * message. This has been an undocumented convention understood by the kernel - * tablet driver and clients such as gpm and XFree86's tablet drivers. - * - * Of the information received from the tablet, the one piece I - * cannot transmit is the proximity bit (without resorting to an EV_MSC - * convention above.) I therefore have taken over REL_MISC and ABS_MISC - * (for relative and absolute reports, respectively) for communicating - * Proximity. Why two events? I thought it interesting to know if the - * Proximity event occurred while the tablet was in absolute or relative - * mode. - * - * Other tablets use the notion of a certain minimum stylus pressure - * to infer proximity. While that could have been done, that is yet - * another 'by convention' behavior, the documentation for which - * would be spread between two (or more) pieces of software. - * - * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and - * replaced with the input_sync() method (which emits EV_SYN.) - */ - -static void aiptek_irq(struct urb *urb) -{ - struct aiptek *aiptek = urb->context; - unsigned char *data = aiptek->data; - struct input_dev *inputdev = aiptek->inputdev; - int jitterable = 0; - int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; - - switch (urb->status) { - case 0: - /* Success */ - break; - - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* This urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); - return; - - default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); - goto exit; - } - - /* See if we are in a delay loop -- throw out report if true. - */ - if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) { - goto exit; - } - - aiptek->inDelay = 0; - aiptek->eventCount++; - - /* Report 1 delivers relative coordinates with either a stylus - * or the mouse. You do not know, however, which input - * tool generated the event. - */ - if (data[0] == 1) { - if (aiptek->curSetting.coordinateMode == - AIPTEK_COORDINATE_ABSOLUTE_MODE) { - aiptek->diagnostic = - AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; - } else { - x = aiptek_convert_from_2s_complement(data[2]); - y = aiptek_convert_from_2s_complement(data[3]); - - /* jitterable keeps track of whether any button has been pressed. - * We're also using it to remap the physical mouse button mask - * to pseudo-settings. (We don't specifically care about it's - * value after moving/transposing mouse button bitmasks, except - * that a non-zero value indicates that one or more - * mouse button was pressed.) - */ - jitterable = data[5] & 0x07; - - left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; - right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; - middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; - - input_report_key(inputdev, BTN_LEFT, left); - input_report_key(inputdev, BTN_MIDDLE, middle); - input_report_key(inputdev, BTN_RIGHT, right); - input_report_rel(inputdev, REL_X, x); - input_report_rel(inputdev, REL_Y, y); - input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN); - - /* Wheel support is in the form of a single-event - * firing. - */ - if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { - input_report_rel(inputdev, REL_WHEEL, - aiptek->curSetting.wheel); - aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; - } - input_sync(inputdev); - } - } - /* Report 2 is delivered only by the stylus, and delivers - * absolute coordinates. - */ - else if (data[0] == 2) { - if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { - aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; - } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE - (aiptek->curSetting.pointerMode)) { - aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; - } else { - x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); - y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); - z = le16_to_cpu(get_unaligned((__le16 *) (data + 6))); - - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; - tip = (data[5] & 0x04) != 0 ? 1 : 0; - - /* Use jitterable to re-arrange button masks - */ - jitterable = data[5] & 0x18; - - bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; - pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; - - /* dv indicates 'data valid' (e.g., the tablet is in sync - * and has delivered a "correct" report) We will ignore - * all 'bad' reports... - */ - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_abs(inputdev, ABS_X, x); - input_report_abs(inputdev, ABS_Y, y); - input_report_abs(inputdev, ABS_PRESSURE, z); - - input_report_key(inputdev, BTN_TOUCH, tip); - input_report_key(inputdev, BTN_STYLUS, bs); - input_report_key(inputdev, BTN_STYLUS2, pck); - - if (aiptek->curSetting.xTilt != - AIPTEK_TILT_DISABLE) { - input_report_abs(inputdev, - ABS_TILT_X, - aiptek->curSetting.xTilt); - } - if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) { - input_report_abs(inputdev, - ABS_TILT_Y, - aiptek->curSetting.yTilt); - } - - /* Wheel support is in the form of a single-event - * firing. - */ - if (aiptek->curSetting.wheel != - AIPTEK_WHEEL_DISABLE) { - input_report_abs(inputdev, - ABS_WHEEL, - aiptek->curSetting.wheel); - aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; - } - } - input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); - input_sync(inputdev); - } - } - } - /* Report 3's come from the mouse in absolute mode. - */ - else if (data[0] == 3) { - if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { - aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; - } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE - (aiptek->curSetting.pointerMode)) { - aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; - } else { - x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); - y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); - - jitterable = data[5] & 0x1c; - - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; - left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; - right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; - middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; - - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_abs(inputdev, ABS_X, x); - input_report_abs(inputdev, ABS_Y, y); - - input_report_key(inputdev, BTN_LEFT, left); - input_report_key(inputdev, BTN_MIDDLE, middle); - input_report_key(inputdev, BTN_RIGHT, right); - - /* Wheel support is in the form of a single-event - * firing. - */ - if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { - input_report_abs(inputdev, - ABS_WHEEL, - aiptek->curSetting.wheel); - aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; - } - } - input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); - input_sync(inputdev); - } - } - } - /* Report 4s come from the macro keys when pressed by stylus - */ - else if (data[0] == 4) { - jitterable = data[1] & 0x18; - - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; - tip = (data[1] & 0x04) != 0 ? 1 : 0; - bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; - pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; - - macro = data[3]; - z = le16_to_cpu(get_unaligned((__le16 *) (data + 4))); - - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_key(inputdev, BTN_TOUCH, tip); - input_report_key(inputdev, BTN_STYLUS, bs); - input_report_key(inputdev, BTN_STYLUS2, pck); - input_report_abs(inputdev, ABS_PRESSURE, z); - } - - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } - input_report_key(inputdev, macroKeyEvents[macro], p); - input_report_abs(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_STYLUS); - input_sync(inputdev); - } - } - /* Report 5s come from the macro keys when pressed by mouse - */ - else if (data[0] == 5) { - jitterable = data[1] & 0x1c; - - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; - left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; - right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; - middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; - macro = data[3]; - - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_key(inputdev, BTN_LEFT, left); - input_report_key(inputdev, BTN_MIDDLE, middle); - input_report_key(inputdev, BTN_RIGHT, right); - } - - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } - - input_report_key(inputdev, macroKeyEvents[macro], 1); - input_report_rel(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_MOUSE); - input_sync(inputdev); - } - } - /* We have no idea which tool can generate a report 6. Theoretically, - * neither need to, having been given reports 4 & 5 for such use. - * However, report 6 is the 'official-looking' report for macroKeys; - * reports 4 & 5 supposively are used to support unnamed, unknown - * hat switches (which just so happen to be the macroKeys.) - */ - else if (data[0] == 6) { - macro = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); - if (macro > 0) { - input_report_key(inputdev, macroKeyEvents[macro - 1], - 0); - } - if (macro < 25) { - input_report_key(inputdev, macroKeyEvents[macro + 1], - 0); - } - - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting. - toolMode), 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - input_report_key(inputdev, macroKeyEvents[macro], 1); - input_report_abs(inputdev, ABS_MISC, - 1 | AIPTEK_REPORT_TOOL_UNKNOWN); - input_sync(inputdev); - } else { - dbg("Unknown report %d", data[0]); - } - - /* Jitter may occur when the user presses a button on the stlyus - * or the mouse. What we do to prevent that is wait 'x' milliseconds - * following a 'jitterable' event, which should give the hand some time - * stabilize itself. - * - * We just introduced aiptek->previousJitterable to carry forth the - * notion that jitter occurs when the button state changes from on to off: - * a person drawing, holding a button down is not subject to jittering. - * With that in mind, changing from upper button depressed to lower button - * WILL transition through a jitter delay. - */ - - if (aiptek->previousJitterable != jitterable && - aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) { - aiptek->endDelay = jiffies + - ((aiptek->curSetting.jitterDelay * HZ) / 1000); - aiptek->inDelay = 1; - } - aiptek->previousJitterable = jitterable; - -exit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval != 0) { - err("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); - } -} - -/*********************************************************************** - * These are the USB id's known so far. We do not identify them to - * specific Aiptek model numbers, because there has been overlaps, - * use, and reuse of id's in existing models. Certain models have - * been known to use more than one ID, indicative perhaps of - * manufacturing revisions. In any event, we consider these - * IDs to not be model-specific nor unique. - */ -static const struct usb_device_id aiptek_ids[] = { - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)}, - {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)}, - {} -}; - -MODULE_DEVICE_TABLE(usb, aiptek_ids); - -/*********************************************************************** - * Open an instance of the tablet driver. - */ -static int aiptek_open(struct input_dev *inputdev) -{ - struct aiptek *aiptek = input_get_drvdata(inputdev); - - aiptek->urb->dev = aiptek->usbdev; - if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) - return -EIO; - - return 0; -} - -/*********************************************************************** - * Close an instance of the tablet driver. - */ -static void aiptek_close(struct input_dev *inputdev) -{ - struct aiptek *aiptek = input_get_drvdata(inputdev); - - usb_kill_urb(aiptek->urb); -} - -/*********************************************************************** - * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x, - * where they were known as usb_set_report and usb_get_report. - */ -static int -aiptek_set_report(struct aiptek *aiptek, - unsigned char report_type, - unsigned char report_id, void *buffer, int size) -{ - return usb_control_msg(aiptek->usbdev, - usb_sndctrlpipe(aiptek->usbdev, 0), - USB_REQ_SET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | - USB_DIR_OUT, (report_type << 8) + report_id, - aiptek->ifnum, buffer, size, 5000); -} - -static int -aiptek_get_report(struct aiptek *aiptek, - unsigned char report_type, - unsigned char report_id, void *buffer, int size) -{ - return usb_control_msg(aiptek->usbdev, - usb_rcvctrlpipe(aiptek->usbdev, 0), - USB_REQ_GET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | - USB_DIR_IN, (report_type << 8) + report_id, - aiptek->ifnum, buffer, size, 5000); -} - -/*********************************************************************** - * Send a command to the tablet. - */ -static int -aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) -{ - const int sizeof_buf = 3 * sizeof(u8); - int ret; - u8 *buf; - - buf = kmalloc(sizeof_buf, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - buf[0] = 2; - buf[1] = command; - buf[2] = data; - - if ((ret = - aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x", - command, data); - } - kfree(buf); - return ret < 0 ? ret : 0; -} - -/*********************************************************************** - * Retrieve information from the tablet. Querying info is defined as first - * sending the {command,data} sequence as a command, followed by a wait - * (aka, "programmaticDelay") and then a "read" request. - */ -static int -aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) -{ - const int sizeof_buf = 3 * sizeof(u8); - int ret; - u8 *buf; - - buf = kmalloc(sizeof_buf, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - buf[0] = 2; - buf[1] = command; - buf[2] = data; - - if (aiptek_command(aiptek, command, data) != 0) { - kfree(buf); - return -EIO; - } - msleep(aiptek->curSetting.programmableDelay); - - if ((ret = - aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { - dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x", - buf[0], buf[1], buf[2]); - ret = -EIO; - } else { - ret = le16_to_cpu(get_unaligned((__le16 *) (buf + 1))); - } - kfree(buf); - return ret; -} - -/*********************************************************************** - * Program the tablet into either absolute or relative mode. - * We also get information about the tablet's size. - */ -static int aiptek_program_tablet(struct aiptek *aiptek) -{ - int ret; - /* Execute Resolution500LPI */ - if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0) - return ret; - - /* Query getModelCode */ - if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0) - return ret; - aiptek->features.modelCode = ret & 0xff; - - /* Query getODMCode */ - if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0) - return ret; - aiptek->features.odmCode = ret; - - /* Query getFirmwareCode */ - if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0) - return ret; - aiptek->features.firmwareCode = ret; - - /* Query getXextension */ - if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) - return ret; - aiptek->inputdev->absmin[ABS_X] = 0; - aiptek->inputdev->absmax[ABS_X] = ret - 1; - - /* Query getYextension */ - if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) - return ret; - aiptek->inputdev->absmin[ABS_Y] = 0; - aiptek->inputdev->absmax[ABS_Y] = ret - 1; - - /* Query getPressureLevels */ - if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) - return ret; - aiptek->inputdev->absmin[ABS_PRESSURE] = 0; - aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; - - /* Depending on whether we are in absolute or relative mode, we will - * do a switchToTablet(absolute) or switchToMouse(relative) command. - */ - if (aiptek->curSetting.coordinateMode == - AIPTEK_COORDINATE_ABSOLUTE_MODE) { - /* Execute switchToTablet */ - if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) { - return ret; - } - } else { - /* Execute switchToMouse */ - if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) { - return ret; - } - } - - /* Enable the macro keys */ - if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0) - return ret; -#if 0 - /* Execute FilterOn */ - if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0) - return ret; -#endif - - /* Execute AutoGainOn */ - if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0) - return ret; - - /* Reset the eventCount, so we track events from last (re)programming - */ - aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA; - aiptek->eventCount = 0; - - return 0; -} - -/*********************************************************************** - * Sysfs functions. Sysfs prefers that individually-tunable parameters - * exist in their separate pseudo-files. Summary data that is immutable - * may exist in a singular file so long as you don't define a writeable - * interface. - */ - -/*********************************************************************** - * support the 'size' file -- display support - */ -static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "%dx%d\n", - aiptek->inputdev->absmax[ABS_X] + 1, - aiptek->inputdev->absmax[ABS_Y] + 1); -} - -/* These structs define the sysfs files, param #1 is the name of the - * file, param 2 is the file permissions, param 3 & 4 are to the - * output generator and input parser routines. Absence of a routine is - * permitted -- it only means can't either 'cat' the file, or send data - * to it. - */ -static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); - -/*********************************************************************** - * support routines for the 'product_id' file - */ -static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev->id.product); -} - -static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); - -/*********************************************************************** - * support routines for the 'vendor_id' file - */ -static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); -} - -static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); - -/*********************************************************************** - * support routines for the 'vendor' file - */ -static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer); - return retval; -} - -static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL); - -/*********************************************************************** - * support routines for the 'product' file - */ -static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product); - return retval; -} - -static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL); - -/*********************************************************************** - * support routines for the 'pointer_mode' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.pointerMode) { - case AIPTEK_POINTER_ONLY_STYLUS_MODE: - s = "stylus"; - break; - - case AIPTEK_POINTER_ONLY_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_POINTER_EITHER_MODE: - s = "either"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "stylus") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_POINTER_ONLY_STYLUS_MODE; - } else if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE; - } else if (strcmp(buf, "either") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; - } - return count; -} - -static DEVICE_ATTR(pointer_mode, - S_IRUGO | S_IWUGO, - show_tabletPointerMode, store_tabletPointerMode); - -/*********************************************************************** - * support routines for the 'coordinate_mode' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.coordinateMode) { - case AIPTEK_COORDINATE_ABSOLUTE_MODE: - s = "absolute"; - break; - - case AIPTEK_COORDINATE_RELATIVE_MODE: - s = "relative"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "absolute") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_ABSOLUTE_MODE; - } else if (strcmp(buf, "relative") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_RELATIVE_MODE; - } - return count; -} - -static DEVICE_ATTR(coordinate_mode, - S_IRUGO | S_IWUGO, - show_tabletCoordinateMode, store_tabletCoordinateMode); - -/*********************************************************************** - * support routines for the 'tool_mode' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) { - case AIPTEK_TOOL_BUTTON_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_TOOL_BUTTON_ERASER_MODE: - s = "eraser"; - break; - - case AIPTEK_TOOL_BUTTON_PENCIL_MODE: - s = "pencil"; - break; - - case AIPTEK_TOOL_BUTTON_PEN_MODE: - s = "pen"; - break; - - case AIPTEK_TOOL_BUTTON_BRUSH_MODE: - s = "brush"; - break; - - case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE: - s = "airbrush"; - break; - - case AIPTEK_TOOL_BUTTON_LENS_MODE: - s = "lens"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE; - } else if (strcmp(buf, "eraser") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE; - } else if (strcmp(buf, "pencil") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE; - } else if (strcmp(buf, "pen") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; - } else if (strcmp(buf, "brush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE; - } else if (strcmp(buf, "airbrush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE; - } else if (strcmp(buf, "lens") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE; - } - - return count; -} - -static DEVICE_ATTR(tool_mode, - S_IRUGO | S_IWUGO, - show_tabletToolMode, store_tabletToolMode); - -/*********************************************************************** - * support routines for the 'xtilt' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { - return snprintf(buf, PAGE_SIZE, "disable\n"); - } else { - return snprintf(buf, PAGE_SIZE, "%d\n", - aiptek->curSetting.xTilt); - } -} - -static ssize_t -store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int x; - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "disable") == 0) { - aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; - } else { - x = (int)simple_strtol(buf, NULL, 10); - if (x >= AIPTEK_TILT_MIN && x <= AIPTEK_TILT_MAX) { - aiptek->newSetting.xTilt = x; - } - } - return count; -} - -static DEVICE_ATTR(xtilt, - S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt); - -/*********************************************************************** - * support routines for the 'ytilt' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { - return snprintf(buf, PAGE_SIZE, "disable\n"); - } else { - return snprintf(buf, PAGE_SIZE, "%d\n", - aiptek->curSetting.yTilt); - } -} - -static ssize_t -store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int y; - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "disable") == 0) { - aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; - } else { - y = (int)simple_strtol(buf, NULL, 10); - if (y >= AIPTEK_TILT_MIN && y <= AIPTEK_TILT_MAX) { - aiptek->newSetting.yTilt = y; - } - } - return count; -} - -static DEVICE_ATTR(ytilt, - S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt); - -/*********************************************************************** - * support routines for the 'jitter' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); -} - -static ssize_t -store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10); - return count; -} - -static DEVICE_ATTR(jitter, - S_IRUGO | S_IWUGO, - show_tabletJitterDelay, store_tabletJitterDelay); - -/*********************************************************************** - * support routines for the 'delay' file. Note that this file - * both displays current setting and allows reprogramming. - */ -static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "%d\n", - aiptek->curSetting.programmableDelay); -} - -static ssize_t -store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10); - return count; -} - -static DEVICE_ATTR(delay, - S_IRUGO | S_IWUGO, - show_tabletProgrammableDelay, store_tabletProgrammableDelay); - -/*********************************************************************** - * support routines for the 'input_path' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n", - aiptek->features.inputPath); -} - -static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL); - -/*********************************************************************** - * support routines for the 'event_count' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); -} - -static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL); - -/*********************************************************************** - * support routines for the 'diagnostic' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *retMsg; - - if (aiptek == NULL) - return 0; - - switch (aiptek->diagnostic) { - case AIPTEK_DIAGNOSTIC_NA: - retMsg = "no errors\n"; - break; - - case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE: - retMsg = "Error: receiving relative reports\n"; - break; - - case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE: - retMsg = "Error: receiving absolute reports\n"; - break; - - case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED: - if (aiptek->curSetting.pointerMode == - AIPTEK_POINTER_ONLY_MOUSE_MODE) { - retMsg = "Error: receiving stylus reports\n"; - } else { - retMsg = "Error: receiving mouse reports\n"; - } - break; - - default: - return 0; - } - return snprintf(buf, PAGE_SIZE, retMsg); -} - -static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); - -/*********************************************************************** - * support routines for the 'stylus_upper' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonUpper) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_LOWER_BUTTON; - } - return count; -} - -static DEVICE_ATTR(stylus_upper, - S_IRUGO | S_IWUGO, - show_tabletStylusUpper, store_tabletStylusUpper); - -/*********************************************************************** - * support routines for the 'stylus_lower' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonLower) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_LOWER_BUTTON; - } - return count; -} - -static DEVICE_ATTR(stylus_lower, - S_IRUGO | S_IWUGO, - show_tabletStylusLower, store_tabletStylusLower); - -/*********************************************************************** - * support routines for the 'mouse_left' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonLeft) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON; - } - return count; -} - -static DEVICE_ATTR(mouse_left, - S_IRUGO | S_IWUGO, - show_tabletMouseLeft, store_tabletMouseLeft); - -/*********************************************************************** - * support routines for the 'mouse_middle' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonMiddle) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_RIGHT_BUTTON; - } - return count; -} - -static DEVICE_ATTR(mouse_middle, - S_IRUGO | S_IWUGO, - show_tabletMouseMiddle, store_tabletMouseMiddle); - -/*********************************************************************** - * support routines for the 'mouse_right' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonRight) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); -} - -static ssize_t -store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonRight = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; - } - return count; -} - -static DEVICE_ATTR(mouse_right, - S_IRUGO | S_IWUGO, - show_tabletMouseRight, store_tabletMouseRight); - -/*********************************************************************** - * support routines for the 'wheel' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { - return snprintf(buf, PAGE_SIZE, "disable\n"); - } else { - return snprintf(buf, PAGE_SIZE, "%d\n", - aiptek->curSetting.wheel); - } -} - -static ssize_t -store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10); - return count; -} - -static DEVICE_ATTR(wheel, - S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel); - -/*********************************************************************** - * support routines for the 'execute' file. Note that this file - * both displays current setting and allows for setting changing. - */ -static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - /* There is nothing useful to display, so a one-line manual - * is in order... - */ - return snprintf(buf, PAGE_SIZE, - "Write anything to this file to program your tablet.\n"); -} - -static ssize_t -store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - /* We do not care what you write to this file. Merely the action - * of writing to this file triggers a tablet reprogramming. - */ - memcpy(&aiptek->curSetting, &aiptek->newSetting, - sizeof(struct aiptek_settings)); - - if (aiptek_program_tablet(aiptek) < 0) - return -EIO; - - return count; -} - -static DEVICE_ATTR(execute, - S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute); - -/*********************************************************************** - * support routines for the 'odm_code' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); -} - -static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL); - -/*********************************************************************** - * support routines for the 'model_code' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); -} - -static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL); - -/*********************************************************************** - * support routines for the 'firmware_code' file. Note that this file - * only displays current setting. - */ -static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "%04x\n", - aiptek->features.firmwareCode); -} - -static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); - -/*********************************************************************** - * This routine removes all existing sysfs files managed by this device - * driver. - */ -static void aiptek_delete_files(struct device *dev) -{ - device_remove_file(dev, &dev_attr_size); - device_remove_file(dev, &dev_attr_product_id); - device_remove_file(dev, &dev_attr_vendor_id); - device_remove_file(dev, &dev_attr_vendor); - device_remove_file(dev, &dev_attr_product); - device_remove_file(dev, &dev_attr_pointer_mode); - device_remove_file(dev, &dev_attr_coordinate_mode); - device_remove_file(dev, &dev_attr_tool_mode); - device_remove_file(dev, &dev_attr_xtilt); - device_remove_file(dev, &dev_attr_ytilt); - device_remove_file(dev, &dev_attr_jitter); - device_remove_file(dev, &dev_attr_delay); - device_remove_file(dev, &dev_attr_input_path); - device_remove_file(dev, &dev_attr_event_count); - device_remove_file(dev, &dev_attr_diagnostic); - device_remove_file(dev, &dev_attr_odm_code); - device_remove_file(dev, &dev_attr_model_code); - device_remove_file(dev, &dev_attr_firmware_code); - device_remove_file(dev, &dev_attr_stylus_lower); - device_remove_file(dev, &dev_attr_stylus_upper); - device_remove_file(dev, &dev_attr_mouse_left); - device_remove_file(dev, &dev_attr_mouse_middle); - device_remove_file(dev, &dev_attr_mouse_right); - device_remove_file(dev, &dev_attr_wheel); - device_remove_file(dev, &dev_attr_execute); -} - -/*********************************************************************** - * This routine creates the sysfs files managed by this device - * driver. - */ -static int aiptek_add_files(struct device *dev) -{ - int ret; - - if ((ret = device_create_file(dev, &dev_attr_size)) || - (ret = device_create_file(dev, &dev_attr_product_id)) || - (ret = device_create_file(dev, &dev_attr_vendor_id)) || - (ret = device_create_file(dev, &dev_attr_vendor)) || - (ret = device_create_file(dev, &dev_attr_product)) || - (ret = device_create_file(dev, &dev_attr_pointer_mode)) || - (ret = device_create_file(dev, &dev_attr_coordinate_mode)) || - (ret = device_create_file(dev, &dev_attr_tool_mode)) || - (ret = device_create_file(dev, &dev_attr_xtilt)) || - (ret = device_create_file(dev, &dev_attr_ytilt)) || - (ret = device_create_file(dev, &dev_attr_jitter)) || - (ret = device_create_file(dev, &dev_attr_delay)) || - (ret = device_create_file(dev, &dev_attr_input_path)) || - (ret = device_create_file(dev, &dev_attr_event_count)) || - (ret = device_create_file(dev, &dev_attr_diagnostic)) || - (ret = device_create_file(dev, &dev_attr_odm_code)) || - (ret = device_create_file(dev, &dev_attr_model_code)) || - (ret = device_create_file(dev, &dev_attr_firmware_code)) || - (ret = device_create_file(dev, &dev_attr_stylus_lower)) || - (ret = device_create_file(dev, &dev_attr_stylus_upper)) || - (ret = device_create_file(dev, &dev_attr_mouse_left)) || - (ret = device_create_file(dev, &dev_attr_mouse_middle)) || - (ret = device_create_file(dev, &dev_attr_mouse_right)) || - (ret = device_create_file(dev, &dev_attr_wheel)) || - (ret = device_create_file(dev, &dev_attr_execute))) { - err("aiptek: killing own sysfs device files\n"); - aiptek_delete_files(dev); - } - return ret; -} - -/*********************************************************************** - * This routine is called when a tablet has been identified. It basically - * sets up the tablet and the driver's internal structures. - */ -static int -aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *usbdev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct aiptek *aiptek; - struct input_dev *inputdev; - struct input_handle *inputhandle; - struct list_head *node, *next; - int i; - int speeds[] = { 0, - AIPTEK_PROGRAMMABLE_DELAY_50, - AIPTEK_PROGRAMMABLE_DELAY_400, - AIPTEK_PROGRAMMABLE_DELAY_25, - AIPTEK_PROGRAMMABLE_DELAY_100, - AIPTEK_PROGRAMMABLE_DELAY_200, - AIPTEK_PROGRAMMABLE_DELAY_300 - }; - int err = -ENOMEM; - - /* programmableDelay is where the command-line specified - * delay is kept. We make it the first element of speeds[], - * so therefore, your override speed is tried first, then the - * remainder. Note that the default value of 400ms will be tried - * if you do not specify any command line parameter. - */ - speeds[0] = programmableDelay; - - aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); - inputdev = input_allocate_device(); - if (!aiptek || !inputdev) - goto fail1; - - aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, - GFP_ATOMIC, &aiptek->data_dma); - if (!aiptek->data) - goto fail1; - - aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!aiptek->urb) - goto fail2; - - aiptek->inputdev = inputdev; - aiptek->usbdev = usbdev; - aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; - aiptek->inDelay = 0; - aiptek->endDelay = 0; - aiptek->previousJitterable = 0; - - /* Set up the curSettings struct. Said struct contains the current - * programmable parameters. The newSetting struct contains changes - * the user makes to the settings via the sysfs interface. Those - * changes are not "committed" to curSettings until the user - * writes to the sysfs/.../execute file. - */ - aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; - aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE; - aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; - aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE; - aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE; - aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; - aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON; - aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; - aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON; - aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON; - aiptek->curSetting.jitterDelay = jitterDelay; - aiptek->curSetting.programmableDelay = programmableDelay; - - /* Both structs should have equivalent settings - */ - aiptek->newSetting = aiptek->curSetting; - - /* Determine the usb devices' physical path. - * Asketh not why we always pretend we're using "../input0", - * but I suspect this will have to be refactored one - * day if a single USB device can be a keyboard & a mouse - * & a tablet, and the inputX number actually will tell - * us something... - */ - usb_make_path(usbdev, aiptek->features.usbPath, - sizeof(aiptek->features.usbPath)); - strlcat(aiptek->features.usbPath, "/input0", - sizeof(aiptek->features.usbPath)); - - /* Set up client data, pointers to open and close routines - * for the input device. - */ - inputdev->name = "Aiptek"; - inputdev->phys = aiptek->features.usbPath; - usb_to_input_id(usbdev, &inputdev->id); - inputdev->dev.parent = &intf->dev; - - input_set_drvdata(inputdev, aiptek); - - inputdev->open = aiptek_open; - inputdev->close = aiptek_close; - - /* Now program the capacities of the tablet, in terms of being - * an input device. - */ - inputdev->evbit[0] |= BIT(EV_KEY) - | BIT(EV_ABS) - | BIT(EV_REL) - | BIT(EV_MSC); - - inputdev->absbit[0] |= BIT(ABS_MISC); - - inputdev->relbit[0] |= - (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); - - inputdev->keybit[LONG(BTN_LEFT)] |= - (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); - - inputdev->keybit[LONG(BTN_DIGI)] |= - (BIT(BTN_TOOL_PEN) | - BIT(BTN_TOOL_RUBBER) | - BIT(BTN_TOOL_PENCIL) | - BIT(BTN_TOOL_AIRBRUSH) | - BIT(BTN_TOOL_BRUSH) | - BIT(BTN_TOOL_MOUSE) | - BIT(BTN_TOOL_LENS) | - BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); - - inputdev->mscbit[0] = BIT(MSC_SERIAL); - - /* Programming the tablet macro keys needs to be done with a for loop - * as the keycodes are discontiguous. - */ - for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) - set_bit(macroKeyEvents[i], inputdev->keybit); - - /* - * Program the input device coordinate capacities. We do not yet - * know what maximum X, Y, and Z values are, so we're putting fake - * values in. Later, we'll ask the tablet to put in the correct - * values. - */ - input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); - input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0); - input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); - input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); - input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); - input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); - - endpoint = &intf->altsetting[0].endpoint[0].desc; - - /* Go set up our URB, which is called when the tablet receives - * input. - */ - usb_fill_int_urb(aiptek->urb, - aiptek->usbdev, - usb_rcvintpipe(aiptek->usbdev, - endpoint->bEndpointAddress), - aiptek->data, 8, aiptek_irq, aiptek, - endpoint->bInterval); - - aiptek->urb->transfer_dma = aiptek->data_dma; - aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* Program the tablet. This sets the tablet up in the mode - * specified in newSetting, and also queries the tablet's - * physical capacities. - * - * Sanity check: if a tablet doesn't like the slow programmatic - * delay, we often get sizes of 0x0. Let's use that as an indicator - * to try faster delays, up to 25 ms. If that logic fails, well, you'll - * have to explain to us how your tablet thinks it's 0x0, and yet that's - * not an error :-) - */ - - for (i = 0; i < ARRAY_SIZE(speeds); ++i) { - aiptek->curSetting.programmableDelay = speeds[i]; - (void)aiptek_program_tablet(aiptek); - if (aiptek->inputdev->absmax[ABS_X] > 0) { - info("input: Aiptek using %d ms programming speed\n", - aiptek->curSetting.programmableDelay); - break; - } - } - - /* Register the tablet as an Input Device - */ - err = input_register_device(aiptek->inputdev); - if (err) - goto fail2; - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to input/eventN. - */ - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } - } - - /* Associate this driver's struct with the usb interface. - */ - usb_set_intfdata(intf, aiptek); - - /* Set up the sysfs files - */ - aiptek_add_files(&intf->dev); - - /* Make sure the evdev module is loaded. Assuming evdev IS a module :-) - */ - if (request_module("evdev") != 0) - info("aiptek: error loading 'evdev' module"); - - return 0; - - fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, - aiptek->data_dma); - fail1: input_free_device(inputdev); - kfree(aiptek); - return err; -} - -/*********************************************************************** - * Deal with tablet disconnecting from the system. - */ -static void aiptek_disconnect(struct usb_interface *intf) -{ - struct aiptek *aiptek = usb_get_intfdata(intf); - - /* Disassociate driver's struct with usb interface - */ - usb_set_intfdata(intf, NULL); - if (aiptek != NULL) { - /* Free & unhook everything from the system. - */ - usb_kill_urb(aiptek->urb); - input_unregister_device(aiptek->inputdev); - aiptek_delete_files(&intf->dev); - usb_free_urb(aiptek->urb); - usb_buffer_free(interface_to_usbdev(intf), - AIPTEK_PACKET_LENGTH, - aiptek->data, aiptek->data_dma); - kfree(aiptek); - } -} - -static struct usb_driver aiptek_driver = { - .name = "aiptek", - .probe = aiptek_probe, - .disconnect = aiptek_disconnect, - .id_table = aiptek_ids, -}; - -static int __init aiptek_init(void) -{ - int result = usb_register(&aiptek_driver); - if (result == 0) { - info(DRIVER_VERSION ": " DRIVER_AUTHOR); - info(DRIVER_DESC); - } - return result; -} - -static void __exit aiptek_exit(void) -{ - usb_deregister(&aiptek_driver); -} - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - -module_param(programmableDelay, int, 0); -MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming"); -module_param(jitterDelay, int, 0); -MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay"); - -module_init(aiptek_init); -module_exit(aiptek_exit); diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c deleted file mode 100644 index b2ca10f2f..0000000 --- a/drivers/usb/input/gtco.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* -*- linux-c -*- - -GTCO digitizer USB driver - -Use the err(), dbg() and info() macros from usb.h for system logging - -TO CHECK: Is pressure done right on report 5? - -Copyright (C) 2006 GTCO CalComp - -This program is free software; you can redistribute it and/or -modify it under the terms of the GNU General Public License -as published by the Free Software Foundation; version 2 -of the License. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation, and that the name of GTCO-CalComp not be used in advertising -or publicity pertaining to distribution of the software without specific, -written prior permission. GTCO-CalComp makes no representations about the -suitability of this software for any purpose. It is provided "as is" -without express or implied warranty. - -GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR -CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, -DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER -TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -PERFORMANCE OF THIS SOFTWARE. - -GTCO CalComp, Inc. -7125 Riverwood Drive -Columbia, MD 21046 - -Jeremy Roberson jroberson@gtcocalcomp.com -Scott Hill shill@gtcocalcomp.com -*/ - - - -/*#define DEBUG*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#include -#include - -/* Version with a Major number of 2 is for kernel inclusion only. */ -#define GTCO_VERSION "2.00.0006" - - -/* MACROS */ - -#define VENDOR_ID_GTCO 0x078C -#define PID_400 0x400 -#define PID_401 0x401 -#define PID_1000 0x1000 -#define PID_1001 0x1001 -#define PID_1002 0x1002 - -/* Max size of a single report */ -#define REPORT_MAX_SIZE 10 - - -/* Bitmask whether pen is in range */ -#define MASK_INRANGE 0x20 -#define MASK_BUTTON 0x01F - -#define PATHLENGTH 64 - -/* DATA STRUCTURES */ - -/* Device table */ -static struct usb_device_id gtco_usbid_table [] = { - { USB_DEVICE(VENDOR_ID_GTCO, PID_400) }, - { USB_DEVICE(VENDOR_ID_GTCO, PID_401) }, - { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) }, - { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) }, - { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) }, - { } -}; -MODULE_DEVICE_TABLE (usb, gtco_usbid_table); - - -/* Structure to hold all of our device specific stuff */ -struct gtco { - - struct input_dev *inputdevice; /* input device struct pointer */ - struct usb_device *usbdev; /* the usb device for this device */ - struct urb *urbinfo; /* urb for incoming reports */ - dma_addr_t buf_dma; /* dma addr of the data buffer*/ - unsigned char * buffer; /* databuffer for reports */ - - char usbpath[PATHLENGTH]; - int openCount; - - /* Information pulled from Report Descriptor */ - u32 usage; - u32 min_X; - u32 max_X; - u32 min_Y; - u32 max_Y; - s8 mintilt_X; - s8 maxtilt_X; - s8 mintilt_Y; - s8 maxtilt_Y; - u32 maxpressure; - u32 minpressure; -}; - - - -/* Code for parsing the HID REPORT DESCRIPTOR */ - -/* From HID1.11 spec */ -struct hid_descriptor -{ - struct usb_descriptor_header header; - __le16 bcdHID; - u8 bCountryCode; - u8 bNumDescriptors; - u8 bDescriptorType; - __le16 wDescriptorLength; -} __attribute__ ((packed)); - - -#define HID_DESCRIPTOR_SIZE 9 -#define HID_DEVICE_TYPE 33 -#define REPORT_DEVICE_TYPE 34 - - -#define PREF_TAG(x) ((x)>>4) -#define PREF_TYPE(x) ((x>>2)&0x03) -#define PREF_SIZE(x) ((x)&0x03) - -#define TYPE_MAIN 0 -#define TYPE_GLOBAL 1 -#define TYPE_LOCAL 2 -#define TYPE_RESERVED 3 - -#define TAG_MAIN_INPUT 0x8 -#define TAG_MAIN_OUTPUT 0x9 -#define TAG_MAIN_FEATURE 0xB -#define TAG_MAIN_COL_START 0xA -#define TAG_MAIN_COL_END 0xC - -#define TAG_GLOB_USAGE 0 -#define TAG_GLOB_LOG_MIN 1 -#define TAG_GLOB_LOG_MAX 2 -#define TAG_GLOB_PHYS_MIN 3 -#define TAG_GLOB_PHYS_MAX 4 -#define TAG_GLOB_UNIT_EXP 5 -#define TAG_GLOB_UNIT 6 -#define TAG_GLOB_REPORT_SZ 7 -#define TAG_GLOB_REPORT_ID 8 -#define TAG_GLOB_REPORT_CNT 9 -#define TAG_GLOB_PUSH 10 -#define TAG_GLOB_POP 11 - -#define TAG_GLOB_MAX 12 - -#define DIGITIZER_USAGE_TIP_PRESSURE 0x30 -#define DIGITIZER_USAGE_TILT_X 0x3D -#define DIGITIZER_USAGE_TILT_Y 0x3E - - -/* - * This is an abbreviated parser for the HID Report Descriptor. We - * know what devices we are talking to, so this is by no means meant - * to be generic. We can make some safe assumptions: - * - * - We know there are no LONG tags, all short - * - We know that we have no MAIN Feature and MAIN Output items - * - We know what the IRQ reports are supposed to look like. - * - * The main purpose of this is to use the HID report desc to figure - * out the mins and maxs of the fields in the IRQ reports. The IRQ - * reports for 400/401 change slightly if the max X is bigger than 64K. - * - */ -static void parse_hid_report_descriptor(struct gtco *device, char * report, - int length) -{ - int x, i = 0; - - /* Tag primitive vars */ - __u8 prefix; - __u8 size; - __u8 tag; - __u8 type; - __u8 data = 0; - __u16 data16 = 0; - __u32 data32 = 0; - - /* For parsing logic */ - int inputnum = 0; - __u32 usage = 0; - - /* Global Values, indexed by TAG */ - __u32 globalval[TAG_GLOB_MAX]; - __u32 oldval[TAG_GLOB_MAX]; - - /* Debug stuff */ - char maintype = 'x'; - char globtype[12]; - int indent = 0; - char indentstr[10] = ""; - - - dbg("======>>>>>>PARSE<<<<<<======"); - - /* Walk this report and pull out the info we need */ - while (i < length) { - prefix = report[i]; - - /* Skip over prefix */ - i++; - - /* Determine data size and save the data in the proper variable */ - size = PREF_SIZE(prefix); - switch (size) { - case 1: - data = report[i]; - break; - case 2: - data16 = le16_to_cpu(get_unaligned((__le16 *)&report[i])); - break; - case 3: - size = 4; - data32 = le32_to_cpu(get_unaligned((__le32 *)&report[i])); - break; - } - - /* Skip size of data */ - i += size; - - /* What we do depends on the tag type */ - tag = PREF_TAG(prefix); - type = PREF_TYPE(prefix); - switch (type) { - case TYPE_MAIN: - strcpy(globtype, ""); - switch (tag) { - - case TAG_MAIN_INPUT: - /* - * The INPUT MAIN tag signifies this is - * information from a report. We need to - * figure out what it is and store the - * min/max values - */ - - maintype = 'I'; - if (data == 2) - strcpy(globtype, "Variable"); - else if (data == 3) - strcpy(globtype, "Var|Const"); - - dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits", - globalval[TAG_GLOB_REPORT_ID], inputnum, - globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX], - globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN], - globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]); - - - /* - We can assume that the first two input items - are always the X and Y coordinates. After - that, we look for everything else by - local usage value - */ - switch (inputnum) { - case 0: /* X coord */ - dbg("GER: X Usage: 0x%x", usage); - if (device->max_X == 0) { - device->max_X = globalval[TAG_GLOB_LOG_MAX]; - device->min_X = globalval[TAG_GLOB_LOG_MIN]; - } - break; - - case 1: /* Y coord */ - dbg("GER: Y Usage: 0x%x", usage); - if (device->max_Y == 0) { - device->max_Y = globalval[TAG_GLOB_LOG_MAX]; - device->min_Y = globalval[TAG_GLOB_LOG_MIN]; - } - break; - - default: - /* Tilt X */ - if (usage == DIGITIZER_USAGE_TILT_X) { - if (device->maxtilt_X == 0) { - device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX]; - device->mintilt_X = globalval[TAG_GLOB_LOG_MIN]; - } - } - - /* Tilt Y */ - if (usage == DIGITIZER_USAGE_TILT_Y) { - if (device->maxtilt_Y == 0) { - device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX]; - device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN]; - } - } - - /* Pressure */ - if (usage == DIGITIZER_USAGE_TIP_PRESSURE) { - if (device->maxpressure == 0) { - device->maxpressure = globalval[TAG_GLOB_LOG_MAX]; - device->minpressure = globalval[TAG_GLOB_LOG_MIN]; - } - } - - break; - } - - inputnum++; - break; - - case TAG_MAIN_OUTPUT: - maintype = 'O'; - break; - - case TAG_MAIN_FEATURE: - maintype = 'F'; - break; - - case TAG_MAIN_COL_START: - maintype = 'S'; - - if (data == 0) { - dbg("======>>>>>> Physical"); - strcpy(globtype, "Physical"); - } else - dbg("======>>>>>>"); - - /* Indent the debug output */ - indent++; - for (x = 0; x < indent; x++) - indentstr[x] = '-'; - indentstr[x] = 0; - - /* Save global tags */ - for (x = 0; x < TAG_GLOB_MAX; x++) - oldval[x] = globalval[x]; - - break; - - case TAG_MAIN_COL_END: - dbg("<<<<<<======"); - maintype = 'E'; - indent--; - for (x = 0; x < indent; x++) - indentstr[x] = '-'; - indentstr[x] = 0; - - /* Copy global tags back */ - for (x = 0; x < TAG_GLOB_MAX; x++) - globalval[x] = oldval[x]; - - break; - } - - switch (size) { - case 1: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data); - break; - - case 2: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data16); - break; - - case 4: - dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", - indentstr, tag, maintype, size, globtype, data32); - break; - } - break; - - case TYPE_GLOBAL: - switch (tag) { - case TAG_GLOB_USAGE: - /* - * First time we hit the global usage tag, - * it should tell us the type of device - */ - if (device->usage == 0) - device->usage = data; - - strcpy(globtype, "USAGE"); - break; - - case TAG_GLOB_LOG_MIN: - strcpy(globtype, "LOG_MIN"); - break; - - case TAG_GLOB_LOG_MAX: - strcpy(globtype, "LOG_MAX"); - break; - - case TAG_GLOB_PHYS_MIN: - strcpy(globtype, "PHYS_MIN"); - break; - - case TAG_GLOB_PHYS_MAX: - strcpy(globtype, "PHYS_MAX"); - break; - - case TAG_GLOB_UNIT_EXP: - strcpy(globtype, "EXP"); - break; - - case TAG_GLOB_UNIT: - strcpy(globtype, "UNIT"); - break; - - case TAG_GLOB_REPORT_SZ: - strcpy(globtype, "REPORT_SZ"); - break; - - case TAG_GLOB_REPORT_ID: - strcpy(globtype, "REPORT_ID"); - /* New report, restart numbering */ - inputnum = 0; - break; - - case TAG_GLOB_REPORT_CNT: - strcpy(globtype, "REPORT_CNT"); - break; - - case TAG_GLOB_PUSH: - strcpy(globtype, "PUSH"); - break; - - case TAG_GLOB_POP: - strcpy(globtype, "POP"); - break; - } - - /* Check to make sure we have a good tag number - so we don't overflow array */ - if (tag < TAG_GLOB_MAX) { - switch (size) { - case 1: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data); - globalval[tag] = data; - break; - - case 2: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data16); - globalval[tag] = data16; - break; - - case 4: - dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x", - indentstr, globtype, tag, size, data32); - globalval[tag] = data32; - break; - } - } else { - dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ", - indentstr, tag, size); - } - break; - - case TYPE_LOCAL: - switch (tag) { - case TAG_GLOB_USAGE: - strcpy(globtype, "USAGE"); - /* Always 1 byte */ - usage = data; - break; - - case TAG_GLOB_LOG_MIN: - strcpy(globtype, "MIN"); - break; - - case TAG_GLOB_LOG_MAX: - strcpy(globtype, "MAX"); - break; - - default: - strcpy(globtype, "UNKNOWN"); - break; - } - - switch (size) { - case 1: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data); - break; - - case 2: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data16); - break; - - case 4: - dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", - indentstr, tag, globtype, size, data32); - break; - } - - break; - } - } -} - -/* INPUT DRIVER Routines */ - -/* - * Called when opening the input device. This will submit the URB to - * the usb system so we start getting reports - */ -static int gtco_input_open(struct input_dev *inputdev) -{ - struct gtco *device = input_get_drvdata(inputdev); - - device->urbinfo->dev = device->usbdev; - if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) - return -EIO; - - return 0; -} - -/* - * Called when closing the input device. This will unlink the URB - */ -static void gtco_input_close(struct input_dev *inputdev) -{ - struct gtco *device = input_get_drvdata(inputdev); - - usb_kill_urb(device->urbinfo); -} - - -/* - * Setup input device capabilities. Tell the input system what this - * device is capable of generating. - * - * This information is based on what is read from the HID report and - * placed in the struct gtco structure - * - */ -static void gtco_setup_caps(struct input_dev *inputdev) -{ - struct gtco *device = input_get_drvdata(inputdev); - - /* Which events */ - inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); - - /* Misc event menu block */ - inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ; - - /* Absolute values based on HID report info */ - input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X, - 0, 0); - input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y, - 0, 0); - - /* Proximity */ - input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0); - - /* Tilt & pressure */ - input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X, - device->maxtilt_X, 0, 0); - input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y, - device->maxtilt_Y, 0, 0); - input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure, - device->maxpressure, 0, 0); - - /* Transducer */ - input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0); -} - -/* USB Routines */ - -/* - * URB callback routine. Called when we get IRQ reports from the - * digitizer. - * - * This bridges the USB and input device worlds. It generates events - * on the input device based on the USB reports. - */ -static void gtco_urb_callback(struct urb *urbinfo) -{ - struct gtco *device = urbinfo->context; - struct input_dev *inputdev; - int rc; - u32 val = 0; - s8 valsigned = 0; - char le_buffer[2]; - - inputdev = device->inputdevice; - - /* Was callback OK? */ - if (urbinfo->status == -ECONNRESET || - urbinfo->status == -ENOENT || - urbinfo->status == -ESHUTDOWN) { - - /* Shutdown is occurring. Return and don't queue up any more */ - return; - } - - if (urbinfo->status != 0) { - /* - * Some unknown error. Hopefully temporary. Just go and - * requeue an URB - */ - goto resubmit; - } - - /* - * Good URB, now process - */ - - /* PID dependent when we interpret the report */ - if (inputdev->id.product == PID_1000 || - inputdev->id.product == PID_1001 || - inputdev->id.product == PID_1002) { - - /* - * Switch on the report ID - * Conveniently, the reports have more information, the higher - * the report number. We can just fall through the case - * statements if we start with the highest number report - */ - switch (device->buffer[0]) { - case 5: - /* Pressure is 9 bits */ - val = ((u16)(device->buffer[8]) << 1); - val |= (u16)(device->buffer[7] >> 7); - input_report_abs(inputdev, ABS_PRESSURE, - device->buffer[8]); - - /* Mask out the Y tilt value used for pressure */ - device->buffer[7] = (u8)((device->buffer[7]) & 0x7F); - - /* Fall thru */ - case 4: - /* Tilt */ - - /* Sign extend these 7 bit numbers. */ - if (device->buffer[6] & 0x40) - device->buffer[6] |= 0x80; - - if (device->buffer[7] & 0x40) - device->buffer[7] |= 0x80; - - - valsigned = (device->buffer[6]); - input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned); - - valsigned = (device->buffer[7]); - input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned); - - /* Fall thru */ - case 2: - case 3: - /* Convert buttons, only 5 bits possible */ - val = (device->buffer[5]) & MASK_BUTTON; - - /* We don't apply any meaning to the bitmask, - just report */ - input_event(inputdev, EV_MSC, MSC_SERIAL, val); - - /* Fall thru */ - case 1: - /* All reports have X and Y coords in the same place */ - val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1])); - input_report_abs(inputdev, ABS_X, val); - - val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3])); - input_report_abs(inputdev, ABS_Y, val); - - /* Ditto for proximity bit */ - val = device->buffer[5] & MASK_INRANGE ? 1 : 0; - input_report_abs(inputdev, ABS_DISTANCE, val); - - /* Report 1 is an exception to how we handle buttons */ - /* Buttons are an index, not a bitmask */ - if (device->buffer[0] == 1) { - - /* - * Convert buttons, 5 bit index - * Report value of index set as one, - * the rest as 0 - */ - val = device->buffer[5] & MASK_BUTTON; - dbg("======>>>>>>REPORT 1: val 0x%X(%d)", - val, val); - - /* - * We don't apply any meaning to the button - * index, just report it - */ - input_event(inputdev, EV_MSC, MSC_SERIAL, val); - } - break; - - case 7: - /* Menu blocks */ - input_event(inputdev, EV_MSC, MSC_SCAN, - device->buffer[1]); - break; - } - } - - /* Other pid class */ - if (inputdev->id.product == PID_400 || - inputdev->id.product == PID_401) { - - /* Report 2 */ - if (device->buffer[0] == 2) { - /* Menu blocks */ - input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]); - } - - /* Report 1 */ - if (device->buffer[0] == 1) { - char buttonbyte; - - /* IF X max > 64K, we still a bit from the y report */ - if (device->max_X > 0x10000) { - - val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]); - val |= (u32)(((u8)device->buffer[3] & 0x1) << 16); - - input_report_abs(inputdev, ABS_X, val); - - le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1); - le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7); - - le_buffer[1] = (u8)(device->buffer[4] >> 1); - le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7); - - val = le16_to_cpu(get_unaligned((__le16 *)le_buffer)); - input_report_abs(inputdev, ABS_Y, val); - - /* - * Shift the button byte right by one to - * make it look like the standard report - */ - buttonbyte = device->buffer[5] >> 1; - } else { - - val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1])); - input_report_abs(inputdev, ABS_X, val); - - val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3])); - input_report_abs(inputdev, ABS_Y, val); - - buttonbyte = device->buffer[5]; - } - - /* BUTTONS and PROXIMITY */ - val = buttonbyte & MASK_INRANGE ? 1 : 0; - input_report_abs(inputdev, ABS_DISTANCE, val); - - /* Convert buttons, only 4 bits possible */ - val = buttonbyte & 0x0F; -#ifdef USE_BUTTONS - for (i = 0; i < 5; i++) - input_report_key(inputdev, BTN_DIGI + i, val & (1 << i)); -#else - /* We don't apply any meaning to the bitmask, just report */ - input_event(inputdev, EV_MSC, MSC_SERIAL, val); -#endif - - /* TRANSDUCER */ - input_report_abs(inputdev, ABS_MISC, device->buffer[6]); - } - } - - /* Everybody gets report ID's */ - input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]); - - /* Sync it up */ - input_sync(inputdev); - - resubmit: - rc = usb_submit_urb(urbinfo, GFP_ATOMIC); - if (rc != 0) - err("usb_submit_urb failed rc=0x%x", rc); -} - -/* - * The probe routine. This is called when the kernel find the matching USB - * vendor/product. We do the following: - * - * - Allocate mem for a local structure to manage the device - * - Request a HID Report Descriptor from the device and parse it to - * find out the device parameters - * - Create an input device and assign it attributes - * - Allocate an URB so the device can talk to us when the input - * queue is open - */ -static int gtco_probe(struct usb_interface *usbinterface, - const struct usb_device_id *id) -{ - - struct gtco *gtco; - struct input_dev *input_dev; - struct hid_descriptor *hid_desc; - char *report = NULL; - int result = 0, retry; - int error; - struct usb_endpoint_descriptor *endpoint; - - /* Allocate memory for device structure */ - gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!gtco || !input_dev) { - err("No more memory"); - error = -ENOMEM; - goto err_free_devs; - } - - /* Set pointer to the input device */ - gtco->inputdevice = input_dev; - - /* Save interface information */ - gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); - - /* Allocate some data for incoming reports */ - gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE, - GFP_KERNEL, >co->buf_dma); - if (!gtco->buffer) { - err("No more memory for us buffers"); - error = -ENOMEM; - goto err_free_devs; - } - - /* Allocate URB for reports */ - gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL); - if (!gtco->urbinfo) { - err("Failed to allocate URB"); - return -ENOMEM; - goto err_free_buf; - } - - /* - * The endpoint is always altsetting 0, we know this since we know - * this device only has one interrupt endpoint - */ - endpoint = &usbinterface->altsetting[0].endpoint[0].desc; - - /* Some debug */ - dbg("gtco # interfaces: %d", usbinterface->num_altsetting); - dbg("num endpoints: %d", usbinterface->cur_altsetting->desc.bNumEndpoints); - dbg("interface class: %d", usbinterface->cur_altsetting->desc.bInterfaceClass); - dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType); - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) - dbg("endpoint: we have interrupt endpoint\n"); - - dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen); - - /* - * Find the HID descriptor so we can find out the size of the - * HID report descriptor - */ - if (usb_get_extra_descriptor(usbinterface->cur_altsetting, - HID_DEVICE_TYPE, &hid_desc) != 0){ - err("Can't retrieve exta USB descriptor to get hid report descriptor length"); - error = -EIO; - goto err_free_urb; - } - - dbg("Extra descriptor success: type:%d len:%d", - hid_desc->bDescriptorType, hid_desc->wDescriptorLength); - - report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); - if (!report) { - err("No more memory for report"); - error = -ENOMEM; - goto err_free_urb; - } - - /* Couple of tries to get reply */ - for (retry = 0; retry < 3; retry++) { - result = usb_control_msg(gtco->usbdev, - usb_rcvctrlpipe(gtco->usbdev, 0), - USB_REQ_GET_DESCRIPTOR, - USB_RECIP_INTERFACE | USB_DIR_IN, - REPORT_DEVICE_TYPE << 8, - 0, /* interface */ - report, - hid_desc->wDescriptorLength, - 5000); /* 5 secs */ - - if (result == hid_desc->wDescriptorLength) - break; - } - - /* If we didn't get the report, fail */ - dbg("usb_control_msg result: :%d", result); - if (result != hid_desc->wDescriptorLength) { - err("Failed to get HID Report Descriptor of size: %d", - hid_desc->wDescriptorLength); - error = -EIO; - goto err_free_urb; - } - - /* Now we parse the report */ - parse_hid_report_descriptor(gtco, report, result); - - /* Now we delete it */ - kfree(report); - - /* Create a device file node */ - usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); - strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); - - /* Set Input device functions */ - input_dev->open = gtco_input_open; - input_dev->close = gtco_input_close; - - /* Set input device information */ - input_dev->name = "GTCO_CalComp"; - input_dev->phys = gtco->usbpath; - - input_set_drvdata(input_dev, gtco); - - /* Now set up all the input device capabilities */ - gtco_setup_caps(input_dev); - - /* Set input device required ID information */ - usb_to_input_id(gtco->usbdev, &input_dev->id); - input_dev->dev.parent = &usbinterface->dev; - - /* Setup the URB, it will be posted later on open of input device */ - endpoint = &usbinterface->altsetting[0].endpoint[0].desc; - - usb_fill_int_urb(gtco->urbinfo, - gtco->usbdev, - usb_rcvintpipe(gtco->usbdev, - endpoint->bEndpointAddress), - gtco->buffer, - REPORT_MAX_SIZE, - gtco_urb_callback, - gtco, - endpoint->bInterval); - - gtco->urbinfo->transfer_dma = gtco->buf_dma; - gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* Save gtco pointer in USB interface gtco */ - usb_set_intfdata(usbinterface, gtco); - - /* All done, now register the input device */ - error = input_register_device(input_dev); - if (error) - goto err_free_urb; - - return 0; - - err_free_urb: - usb_free_urb(gtco->urbinfo); - err_free_buf: - usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, - gtco->buffer, gtco->buf_dma); - err_free_devs: - kfree(report); - input_free_device(input_dev); - kfree(gtco); - return error; -} - -/* - * This function is a standard USB function called when the USB device - * is disconnected. We will get rid of the URV, de-register the input - * device, and free up allocated memory - */ -static void gtco_disconnect(struct usb_interface *interface) -{ - /* Grab private device ptr */ - struct gtco *gtco = usb_get_intfdata(interface); - - /* Now reverse all the registration stuff */ - if (gtco) { - input_unregister_device(gtco->inputdevice); - usb_kill_urb(gtco->urbinfo); - usb_free_urb(gtco->urbinfo); - usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, - gtco->buffer, gtco->buf_dma); - kfree(gtco); - } - - info("gtco driver disconnected"); -} - -/* STANDARD MODULE LOAD ROUTINES */ - -static struct usb_driver gtco_driverinfo_table = { - .name = "gtco", - .id_table = gtco_usbid_table, - .probe = gtco_probe, - .disconnect = gtco_disconnect, -}; - -/* - * Register this module with the USB subsystem - */ -static int __init gtco_init(void) -{ - int error; - - error = usb_register(>co_driverinfo_table); - if (error) { - err("usb_register() failed rc=0x%x", error); - return error; - } - - printk("GTCO usb driver version: %s", GTCO_VERSION); - return 0; -} - -/* - * Deregister this module with the USB subsystem - */ -static void __exit gtco_exit(void) -{ - usb_deregister(>co_driverinfo_table); -} - -module_init(gtco_init); -module_exit(gtco_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c deleted file mode 100644 index 91e6d00..0000000 --- a/drivers/usb/input/kbtab.c +++ /dev/null @@ -1,226 +0,0 @@ -#include -#include -#include -#include -#include -#include - -/* - * Version Information - * v0.0.1 - Original, extremely basic version, 2.4.xx only - * v0.0.2 - Updated, works with 2.5.62 and 2.4.20; - * - added pressure-threshold modules param code from - * Alex Perry - */ - -#define DRIVER_VERSION "v0.0.2" -#define DRIVER_AUTHOR "Josh Myer " -#define DRIVER_DESC "USB KB Gear JamStudio Tablet driver" -#define DRIVER_LICENSE "GPL" - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -#define USB_VENDOR_ID_KBGEAR 0x084e - -static int kb_pressure_click = 0x10; -module_param(kb_pressure_click, int, 0); -MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); - -struct kbtab { - unsigned char *data; - dma_addr_t data_dma; - struct input_dev *dev; - struct usb_device *usbdev; - struct urb *irq; - int x, y; - int button; - int pressure; - __u32 serial[2]; - char phys[32]; -}; - -static void kbtab_irq(struct urb *urb) -{ - struct kbtab *kbtab = urb->context; - unsigned char *data = kbtab->data; - struct input_dev *dev = kbtab->dev; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - kbtab->x = le16_to_cpu(get_unaligned((__le16 *) &data[1])); - kbtab->y = le16_to_cpu(get_unaligned((__le16 *) &data[3])); - - kbtab->pressure = (data[5]); - - input_report_key(dev, BTN_TOOL_PEN, 1); - - input_report_abs(dev, ABS_X, kbtab->x); - input_report_abs(dev, ABS_Y, kbtab->y); - - /*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/ - input_report_key(dev, BTN_RIGHT, data[0] & 0x02); - - if (-1 == kb_pressure_click) { - input_report_abs(dev, ABS_PRESSURE, kbtab->pressure); - } else { - input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0); - }; - - input_sync(dev); - - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static struct usb_device_id kbtab_ids[] = { - { USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 }, - { } -}; - -MODULE_DEVICE_TABLE(usb, kbtab_ids); - -static int kbtab_open(struct input_dev *dev) -{ - struct kbtab *kbtab = input_get_drvdata(dev); - - kbtab->irq->dev = kbtab->usbdev; - if (usb_submit_urb(kbtab->irq, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void kbtab_close(struct input_dev *dev) -{ - struct kbtab *kbtab = input_get_drvdata(dev); - - usb_kill_urb(kbtab->irq); -} - -static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct kbtab *kbtab; - struct input_dev *input_dev; - int error = -ENOMEM; - - kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!kbtab || !input_dev) - goto fail1; - - kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma); - if (!kbtab->data) - goto fail1; - - kbtab->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!kbtab->irq) - goto fail2; - - kbtab->usbdev = dev; - kbtab->dev = input_dev; - - usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); - strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys)); - - input_dev->name = "KB Gear Tablet"; - input_dev->phys = kbtab->phys; - usb_to_input_id(dev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, kbtab); - - input_dev->open = kbtab_open; - input_dev->close = kbtab_close; - - input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); - input_dev->mscbit[0] |= BIT(MSC_SERIAL); - input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); - - endpoint = &intf->cur_altsetting->endpoint[0].desc; - - usb_fill_int_urb(kbtab->irq, dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - kbtab->data, 8, - kbtab_irq, kbtab, endpoint->bInterval); - kbtab->irq->transfer_dma = kbtab->data_dma; - kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - error = input_register_device(kbtab->dev); - if (error) - goto fail3; - - usb_set_intfdata(intf, kbtab); - - return 0; - - fail3: usb_free_urb(kbtab->irq); - fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); - fail1: input_free_device(input_dev); - kfree(kbtab); - return error; -} - -static void kbtab_disconnect(struct usb_interface *intf) -{ - struct kbtab *kbtab = usb_get_intfdata(intf); - - usb_set_intfdata(intf, NULL); - if (kbtab) { - usb_kill_urb(kbtab->irq); - input_unregister_device(kbtab->dev); - usb_free_urb(kbtab->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma); - kfree(kbtab); - } -} - -static struct usb_driver kbtab_driver = { - .name = "kbtab", - .probe = kbtab_probe, - .disconnect = kbtab_disconnect, - .id_table = kbtab_ids, -}; - -static int __init kbtab_init(void) -{ - int retval; - retval = usb_register(&kbtab_driver); - if (retval) - goto out; - info(DRIVER_VERSION ":" DRIVER_DESC); -out: - return retval; -} - -static void __exit kbtab_exit(void) -{ - usb_deregister(&kbtab_driver); -} - -module_init(kbtab_init); -module_exit(kbtab_exit); diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h deleted file mode 100644 index d85abfc..0000000 --- a/drivers/usb/input/wacom.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * drivers/usb/input/wacom.h - * - * USB Wacom Graphire and Wacom Intuos tablet support - * - * Copyright (c) 2000-2004 Vojtech Pavlik - * Copyright (c) 2000 Andreas Bach Aaen - * Copyright (c) 2000 Clifford Wolf - * Copyright (c) 2000 Sam Mosel - * Copyright (c) 2000 James E. Blair - * Copyright (c) 2000 Daniel Egger - * Copyright (c) 2001 Frederic Lepied - * Copyright (c) 2004 Panagiotis Issaris - * Copyright (c) 2002-2006 Ping Cheng - * - * ChangeLog: - * v0.1 (vp) - Initial release - * v0.2 (aba) - Support for all buttons / combinations - * v0.3 (vp) - Support for Intuos added - * v0.4 (sm) - Support for more Intuos models, menustrip - * relative mode, proximity. - * v0.5 (vp) - Big cleanup, nifty features removed, - * they belong in userspace - * v1.8 (vp) - Submit URB only when operating, moved to CVS, - * use input_report_key instead of report_btn and - * other cleanups - * v1.11 (vp) - Add URB ->dev setting for new kernels - * v1.11 (jb) - Add support for the 4D Mouse & Lens - * v1.12 (de) - Add support for two more inking pen IDs - * v1.14 (vp) - Use new USB device id probing scheme. - * Fix Wacom Graphire mouse wheel - * v1.18 (vp) - Fix mouse wheel direction - * Make mouse relative - * v1.20 (fl) - Report tool id for Intuos devices - * - Multi tools support - * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...) - * - Add PL models support - * - Fix Wacom Graphire mouse wheel again - * v1.21 (vp) - Removed protocol descriptions - * - Added MISC_SERIAL for tool serial numbers - * (gb) - Identify version on module load. - * v1.21.1 (fl) - added Graphire2 support - * v1.21.2 (fl) - added Intuos2 support - * - added all the PL ids - * v1.21.3 (fl) - added another eraser id from Neil Okamoto - * - added smooth filter for Graphire from Peri Hankey - * - added PenPartner support from Olaf van Es - * - new tool ids from Ole Martin Bjoerndalen - * v1.29 (pc) - Add support for more tablets - * - Fix pressure reporting - * v1.30 (vp) - Merge 2.4 and 2.5 drivers - * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse - * - Cleanups here and there - * v1.30.1 (pi) - Added Graphire3 support - * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... - * v1.43 (pc) - Added support for Cintiq 21UX - * - Fixed a Graphire bug - * - Merged wacom_intuos3_irq into wacom_intuos_irq - * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. - * - Report Device IDs - * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19 - * - Minor data report fix - * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, - * - where wacom_sys.c deals with system specific code, - * - and wacom_wac.c deals with Wacom specific code - * - Support Intuos3 4x6 - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef WACOM_H -#define WACOM_H -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v1.46" -#define DRIVER_AUTHOR "Vojtech Pavlik " -#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" -#define DRIVER_LICENSE "GPL" - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -#define USB_VENDOR_ID_WACOM 0x056a - -struct wacom { - dma_addr_t data_dma; - struct input_dev *dev; - struct usb_device *usbdev; - struct urb *irq; - struct wacom_wac * wacom_wac; - char phys[32]; -}; - -struct wacom_combo { - struct wacom * wacom; - struct urb * urb; -}; - -extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); -extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data); -extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data); -extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data); -extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value); -extern void wacom_input_sync(void *wcombo); -extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac); -extern __u16 wacom_le16_to_cpu(unsigned char *data); -extern __u16 wacom_be16_to_cpu(unsigned char *data); -extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); -extern const struct usb_device_id * get_device_table(void); - -#endif diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c deleted file mode 100644 index 1fe4820..0000000 --- a/drivers/usb/input/wacom_sys.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * drivers/usb/input/wacom_sys.c - * - * USB Wacom Graphire and Wacom Intuos tablet support - system specific code - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include "wacom.h" -#include "wacom_wac.h" - -#define USB_REQ_GET_REPORT 0x01 -#define USB_REQ_SET_REPORT 0x09 - -static int usb_get_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) -{ - return usb_control_msg(interface_to_usbdev(intf), - usb_rcvctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 100); -} - -static int usb_set_report(struct usb_interface *intf, unsigned char type, - unsigned char id, void *buf, int size) -{ - return usb_control_msg(interface_to_usbdev(intf), - usb_sndctrlpipe(interface_to_usbdev(intf), 0), - USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, - buf, size, 1000); -} - -static struct input_dev * get_input_dev(struct wacom_combo *wcombo) -{ - return wcombo->wacom->dev; -} - -static void wacom_sys_irq(struct urb *urb) -{ - struct wacom *wacom = urb->context; - struct wacom_combo wcombo; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - wcombo.wacom = wacom; - wcombo.urb = urb; - - if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo)) - input_sync(get_input_dev(&wcombo)); - - exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) -{ - input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); - return; -} - -void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) -{ - input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); - return; -} - -void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) -{ - input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); - return; -} - -void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) -{ - input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); - return; -} - -__u16 wacom_be16_to_cpu(unsigned char *data) -{ - __u16 value; - value = be16_to_cpu(*(__be16 *) data); - return value; -} - -__u16 wacom_le16_to_cpu(unsigned char *data) -{ - __u16 value; - value = le16_to_cpu(*(__le16 *) data); - return value; -} - -void wacom_input_sync(void *wcombo) -{ - input_sync(get_input_dev((struct wacom_combo *)wcombo)); - return; -} - -static int wacom_open(struct input_dev *dev) -{ - struct wacom *wacom = input_get_drvdata(dev); - - wacom->irq->dev = wacom->usbdev; - if (usb_submit_urb(wacom->irq, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void wacom_close(struct input_dev *dev) -{ - struct wacom *wacom = input_get_drvdata(dev); - - usb_kill_urb(wacom->irq); -} - -void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->evbit[0] |= BIT(EV_MSC); - input_dev->mscbit[0] |= BIT(MSC_SERIAL); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4); -} - -void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->evbit[0] |= BIT(EV_REL); - input_dev->relbit[0] |= BIT(REL_WHEEL); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); -} - -void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3); - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); -} - -void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); -} - -void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); - input_dev->mscbit[0] |= BIT(MSC_SERIAL); - input_dev->relbit[0] |= BIT(REL_WHEEL); - input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) - | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); - input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); - input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); - input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); - input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); - input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); -} - -void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); -} - -void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER); -} - -static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct wacom *wacom; - struct wacom_wac *wacom_wac; - struct input_dev *input_dev; - int error = -ENOMEM; - char rep_data[2], limit = 0; - - wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); - wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!wacom || !input_dev || !wacom_wac) - goto fail1; - - wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); - if (!wacom_wac->data) - goto fail1; - - wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) - goto fail2; - - wacom->usbdev = dev; - wacom->dev = input_dev; - usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); - strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - - wacom_wac->features = get_wacom_feature(id); - BUG_ON(wacom_wac->features->pktlen > 10); - - input_dev->name = wacom_wac->features->name; - wacom->wacom_wac = wacom_wac; - usb_to_input_id(dev, &input_dev->id); - - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, wacom); - - input_dev->open = wacom_open; - input_dev->close = wacom_close; - - input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); - input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); - input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC); - - wacom_init_input_dev(input_dev, wacom_wac); - - endpoint = &intf->cur_altsetting->endpoint[0].desc; - - usb_fill_int_urb(wacom->irq, dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - wacom_wac->data, wacom_wac->features->pktlen, - wacom_sys_irq, wacom, endpoint->bInterval); - wacom->irq->transfer_dma = wacom->data_dma; - wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - error = input_register_device(wacom->dev); - if (error) - goto fail3; - - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); - - usb_set_intfdata(intf, wacom); - return 0; - - fail3: usb_free_urb(wacom->irq); - fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma); - fail1: input_free_device(input_dev); - kfree(wacom); - kfree(wacom_wac); - return error; -} - -static void wacom_disconnect(struct usb_interface *intf) -{ - struct wacom *wacom = usb_get_intfdata (intf); - - usb_set_intfdata(intf, NULL); - if (wacom) { - usb_kill_urb(wacom->irq); - input_unregister_device(wacom->dev); - usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); - kfree(wacom->wacom_wac); - kfree(wacom); - } -} - -static struct usb_driver wacom_driver = { - .name = "wacom", - .probe = wacom_probe, - .disconnect = wacom_disconnect, -}; - -static int __init wacom_init(void) -{ - int result; - wacom_driver.id_table = get_device_table(); - result = usb_register(&wacom_driver); - if (result == 0) - info(DRIVER_VERSION ":" DRIVER_DESC); - return result; -} - -static void __exit wacom_exit(void) -{ - usb_deregister(&wacom_driver); -} - -module_init(wacom_init); -module_exit(wacom_exit); diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c deleted file mode 100644 index 4f3e9bc..0000000 --- a/drivers/usb/input/wacom_wac.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * drivers/usb/input/wacom_wac.c - * - * USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code - * - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include "wacom.h" -#include "wacom_wac.h" - -static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - - switch (data[0]) { - case 1: - if (data[5] & 0x80) { - wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; - wacom_report_key(wcombo, wacom->tool[0], 1); - wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */ - wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); - wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); - wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); - wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127)); - wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); - } else { - wacom_report_key(wcombo, wacom->tool[0], 0); - wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */ - wacom_report_abs(wcombo, ABS_PRESSURE, -1); - wacom_report_key(wcombo, BTN_TOUCH, 0); - } - break; - case 2: - wacom_report_key(wcombo, BTN_TOOL_PEN, 1); - wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ - wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); - wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); - wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127); - wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); - wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40)); - break; - default: - printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); - return 0; - } - return 1; -} - -static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - int prox, id, pressure; - - if (data[0] != 2) { - dbg("wacom_pl_irq: received unknown report #%d", data[0]); - return 0; - } - - prox = data[1] & 0x40; - - id = ERASER_DEVICE_ID; - if (prox) { - - pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); - if (wacom->features->pressure_max > 255) - pressure = (pressure << 1) | ((data[4] >> 6) & 1); - pressure += (wacom->features->pressure_max + 1) / 2; - - /* - * if going from out of proximity into proximity select between the eraser - * and the pen based on the state of the stylus2 button, choose eraser if - * pressed else choose pen. if not a proximity change from out to in, send - * an out of proximity for previous tool then a in for new tool. - */ - if (!wacom->tool[0]) { - /* Eraser bit set for DTF */ - if (data[1] & 0x10) - wacom->tool[1] = BTN_TOOL_RUBBER; - else - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; - } else { - /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { - /* report out proximity for previous tool */ - wacom_report_key(wcombo, wacom->tool[1], 0); - wacom_input_sync(wcombo); - wacom->tool[1] = BTN_TOOL_PEN; - return 0; - } - } - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - id = STYLUS_DEVICE_ID; - } - wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */ - wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ - wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); - wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); - wacom_report_abs(wcombo, ABS_PRESSURE, pressure); - - wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08); - wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10); - /* Only allow the stylus2 button to be reported for the pen tool. */ - wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); - } else { - /* report proximity-out of a (valid) tool */ - if (wacom->tool[1] != BTN_TOOL_RUBBER) { - /* Unknown tool selected default to pen tool */ - wacom->tool[1] = BTN_TOOL_PEN; - } - wacom_report_key(wcombo, wacom->tool[1], prox); - } - - wacom->tool[0] = prox; /* Save proximity state */ - return 1; -} - -static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - int id; - - if (data[0] != 2) { - printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); - return 0; - } - - if (data[1] & 0x04) { - wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20); - wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08); - id = ERASER_DEVICE_ID; - } else { - wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20); - wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); - id = STYLUS_DEVICE_ID; - } - wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ - wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); - wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); - wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); - wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); - wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); - return 1; -} - -static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - int x, y, id, rw; - - if (data[0] != 2) { - dbg("wacom_graphire_irq: received unknown report #%d", data[0]); - return 0; - } - - id = STYLUS_DEVICE_ID; - if (data[1] & 0x80) { /* in prox */ - - switch ((data[1] >> 5) & 3) { - - case 0: /* Pen */ - wacom->tool[0] = BTN_TOOL_PEN; - break; - - case 1: /* Rubber */ - wacom->tool[0] = BTN_TOOL_RUBBER; - id = ERASER_DEVICE_ID; - break; - - case 2: /* Mouse with wheel */ - wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04); - if (wacom->features->type == WACOM_G4) { - rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); - wacom_report_rel(wcombo, REL_WHEEL, -rw); - } else - wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]); - /* fall through */ - - case 3: /* Mouse without wheel */ - wacom->tool[0] = BTN_TOOL_MOUSE; - id = CURSOR_DEVICE_ID; - wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); - wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); - if (wacom->features->type == WACOM_G4) - wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f); - else - wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); - break; - } - x = wacom_le16_to_cpu(&data[2]); - y = wacom_le16_to_cpu(&data[4]); - wacom_report_abs(wcombo, ABS_X, x); - wacom_report_abs(wcombo, ABS_Y, y); - if (wacom->tool[0] != BTN_TOOL_MOUSE) { - wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); - wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01); - wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); - wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); - } - wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ - wacom_report_key(wcombo, wacom->tool[0], 1); - } else if (!(data[1] & 0x90)) { - wacom_report_abs(wcombo, ABS_X, 0); - wacom_report_abs(wcombo, ABS_Y, 0); - if (wacom->tool[0] == BTN_TOOL_MOUSE) { - wacom_report_key(wcombo, BTN_LEFT, 0); - wacom_report_key(wcombo, BTN_RIGHT, 0); - wacom_report_abs(wcombo, ABS_DISTANCE, 0); - } else { - wacom_report_abs(wcombo, ABS_PRESSURE, 0); - wacom_report_key(wcombo, BTN_TOUCH, 0); - wacom_report_key(wcombo, BTN_STYLUS, 0); - wacom_report_key(wcombo, BTN_STYLUS2, 0); - } - wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - wacom_report_key(wcombo, wacom->tool[0], 0); - } - - /* send pad data */ - if (wacom->features->type == WACOM_G4) { - if (data[7] & 0xf8) { - wacom_input_sync(wcombo); /* sync last event */ - wacom->id[1] = 1; - wacom->serial[1] = (data[7] & 0xf8); - wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); - wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); - rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); - wacom_report_rel(wcombo, REL_WHEEL, rw); - wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); - wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); - } else if (wacom->id[1]) { - wacom_input_sync(wcombo); /* sync last event */ - wacom->id[1] = 0; - wacom_report_key(wcombo, BTN_0, (data[7] & 0x40)); - wacom_report_key(wcombo, BTN_4, (data[7] & 0x80)); - wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); - wacom_report_abs(wcombo, ABS_MISC, 0); - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); - } - } - return 1; -} - -static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - int idx; - - /* tool number */ - idx = data[1] & 0x01; - - /* Enter report */ - if ((data[1] & 0xfc) == 0xc0) { - /* serial number of the tool */ - wacom->serial[idx] = ((data[3] & 0x0f) << 28) + - (data[4] << 20) + (data[5] << 12) + - (data[6] << 4) + (data[7] >> 4); - - wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); - switch (wacom->id[idx]) { - case 0x812: /* Inking pen */ - case 0x801: /* Intuos3 Inking pen */ - case 0x012: - wacom->tool[idx] = BTN_TOOL_PENCIL; - break; - case 0x822: /* Pen */ - case 0x842: - case 0x852: - case 0x823: /* Intuos3 Grip Pen */ - case 0x813: /* Intuos3 Classic Pen */ - case 0x885: /* Intuos3 Marker Pen */ - case 0x022: - wacom->tool[idx] = BTN_TOOL_PEN; - break; - case 0x832: /* Stroke pen */ - case 0x032: - wacom->tool[idx] = BTN_TOOL_BRUSH; - break; - case 0x007: /* Mouse 4D and 2D */ - case 0x09c: - case 0x094: - case 0x017: /* Intuos3 2D Mouse */ - wacom->tool[idx] = BTN_TOOL_MOUSE; - break; - case 0x096: /* Lens cursor */ - case 0x097: /* Intuos3 Lens cursor */ - wacom->tool[idx] = BTN_TOOL_LENS; - break; - case 0x82a: /* Eraser */ - case 0x85a: - case 0x91a: - case 0xd1a: - case 0x0fa: - case 0x82b: /* Intuos3 Grip Pen Eraser */ - case 0x81b: /* Intuos3 Classic Pen Eraser */ - case 0x91b: /* Intuos3 Airbrush Eraser */ - wacom->tool[idx] = BTN_TOOL_RUBBER; - break; - case 0xd12: - case 0x912: - case 0x112: - case 0x913: /* Intuos3 Airbrush */ - wacom->tool[idx] = BTN_TOOL_AIRBRUSH; - break; - default: /* Unknown tool */ - wacom->tool[idx] = BTN_TOOL_PEN; - } - return 1; - } - - /* Exit report */ - if ((data[1] & 0xfe) == 0x80) { - wacom_report_abs(wcombo, ABS_X, 0); - wacom_report_abs(wcombo, ABS_Y, 0); - wacom_report_abs(wcombo, ABS_DISTANCE, 0); - if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { - wacom_report_key(wcombo, BTN_LEFT, 0); - wacom_report_key(wcombo, BTN_MIDDLE, 0); - wacom_report_key(wcombo, BTN_RIGHT, 0); - wacom_report_key(wcombo, BTN_SIDE, 0); - wacom_report_key(wcombo, BTN_EXTRA, 0); - wacom_report_abs(wcombo, ABS_THROTTLE, 0); - wacom_report_abs(wcombo, ABS_RZ, 0); - } else { - wacom_report_abs(wcombo, ABS_PRESSURE, 0); - wacom_report_abs(wcombo, ABS_TILT_X, 0); - wacom_report_abs(wcombo, ABS_TILT_Y, 0); - wacom_report_key(wcombo, BTN_STYLUS, 0); - wacom_report_key(wcombo, BTN_STYLUS2, 0); - wacom_report_key(wcombo, BTN_TOUCH, 0); - wacom_report_abs(wcombo, ABS_WHEEL, 0); - } - wacom_report_key(wcombo, wacom->tool[idx], 0); - wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - return 2; - } - return 0; -} - -static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - unsigned int t; - - /* general pen packet */ - if ((data[1] & 0xb8) == 0xa0) { - t = (data[6] << 2) | ((data[7] >> 6) & 3); - wacom_report_abs(wcombo, ABS_PRESSURE, t); - wacom_report_abs(wcombo, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); - wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2); - wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4); - wacom_report_key(wcombo, BTN_TOUCH, t > 10); - } - - /* airbrush second packet */ - if ((data[1] & 0xbc) == 0xb4) { - wacom_report_abs(wcombo, ABS_WHEEL, - (data[6] << 2) | ((data[7] >> 6) & 3)); - wacom_report_abs(wcombo, ABS_TILT_X, - ((data[7] << 1) & 0x7e) | (data[8] >> 7)); - wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f); - } - return; -} - -static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) -{ - unsigned char *data = wacom->data; - unsigned int t; - int idx, result; - - if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) { - dbg("wacom_intuos_irq: received unknown report #%d", data[0]); - return 0; - } - - /* tool number */ - idx = data[1] & 0x01; - - /* pad packets. Works as a second tool and is always in prox */ - if (data[0] == 12) { - /* initiate the pad as a device */ - if (wacom->tool[1] != BTN_TOOL_FINGER) - wacom->tool[1] = BTN_TOOL_FINGER; - - wacom_report_key(wcombo, BTN_0, (data[5] & 0x01)); - wacom_report_key(wcombo, BTN_1, (data[5] & 0x02)); - wacom_report_key(wcombo, BTN_2, (data[5] & 0x04)); - wacom_report_key(wcombo, BTN_3, (data[5] & 0x08)); - wacom_report_key(wcombo, BTN_4, (data[6] & 0x01)); - wacom_report_key(wcombo, BTN_5, (data[6] & 0x02)); - wacom_report_key(wcombo, BTN_6, (data[6] & 0x04)); - wacom_report_key(wcombo, BTN_7, (data[6] & 0x08)); - wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); - wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); - - if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | - data[2] | (data[3] & 0x1f) | data[4]) - wacom_report_key(wcombo, wacom->tool[1], 1); - else - wacom_report_key(wcombo, wacom->tool[1], 0); - wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff); - return 1; - } - - /* process in/out prox events */ - result = wacom_intuos_inout(wacom, wcombo); - if (result) - return result-1; - - /* Only large I3 and I1 & I2 support Lense Cursor */ - if((wacom->tool[idx] == BTN_TOOL_LENS) - && ((wacom->features->type == INTUOS3) - || (wacom->features->type == INTUOS3S))) - return 0; - - /* Cintiq doesn't send data when RDY bit isn't set */ - if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) - return 0; - - if (wacom->features->type >= INTUOS3S) { - wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); - wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); - wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); - } else { - wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2])); - wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4])); - wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); - } - - /* process general packets */ - wacom_intuos_general(wacom, wcombo); - - /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */ - if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) { - - if (data[1] & 0x02) { - /* Rotation packet */ - if (wacom->features->type >= INTUOS3S) { - /* I3 marker pen rotation reported as wheel - * due to valuator limitation - */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : - ((t-1) / 2 + 450)) : (450 - t / 2) ; - wacom_report_abs(wcombo, ABS_WHEEL, t); - } else { - /* 4D mouse rotation packet */ - t = (data[6] << 3) | ((data[7] >> 5) & 7); - wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ? - ((t - 1) / 2) : -t / 2); - } - - } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) { - /* 4D mouse packet */ - wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); - wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); - wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); - - wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x20); - wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x10); - t = (data[6] << 2) | ((data[7] >> 6) & 3); - wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); - - } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { - /* 2D mouse packet */ - wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x04); - wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08); - wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x10); - wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01) - - ((data[8] & 0x02) >> 1)); - - /* I3 2D mouse side buttons */ - if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) { - wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40); - wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20); - } - - } else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) { - /* Lens cursor packets */ - wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01); - wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02); - wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04); - wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x10); - wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x08); - } - } - - wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */ - wacom_report_key(wcombo, wacom->tool[idx], 1); - wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]); - return 1; -} - -int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) -{ - switch (wacom_wac->features->type) { - case PENPARTNER: - return (wacom_penpartner_irq(wacom_wac, wcombo)); - break; - case PL: - return (wacom_pl_irq(wacom_wac, wcombo)); - break; - case WACOM_G4: - case GRAPHIRE: - return (wacom_graphire_irq(wacom_wac, wcombo)); - break; - case PTU: - return (wacom_ptu_irq(wacom_wac, wcombo)); - break; - case INTUOS: - case INTUOS3S: - case INTUOS3: - case INTUOS3L: - case CINTIQ: - return (wacom_intuos_irq(wacom_wac, wcombo)); - break; - default: - return 0; - } - return 0; -} - -void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac) -{ - switch (wacom_wac->features->type) { - case WACOM_G4: - input_dev_g4(input_dev, wacom_wac); - /* fall through */ - case GRAPHIRE: - input_dev_g(input_dev, wacom_wac); - break; - case INTUOS3: - case INTUOS3L: - case CINTIQ: - input_dev_i3(input_dev, wacom_wac); - /* fall through */ - case INTUOS3S: - input_dev_i3s(input_dev, wacom_wac); - case INTUOS: - input_dev_i(input_dev, wacom_wac); - break; - case PL: - case PTU: - input_dev_pl(input_dev, wacom_wac); - break; - case PENPARTNER: - input_dev_pt(input_dev, wacom_wac); - break; - } - return; -} - -static struct wacom_features wacom_features[] = { - { "Wacom Penpartner", 7, 5040, 3780, 255, 0, PENPARTNER }, - { "Wacom Graphire", 8, 10206, 7422, 511, 63, GRAPHIRE }, - { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 63, GRAPHIRE }, - { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 63, GRAPHIRE }, - { "Wacom Graphire3", 8, 10208, 7424, 511, 63, GRAPHIRE }, - { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE }, - { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 }, - { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, - { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, - { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, - { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, - { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, - { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, - { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, - { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, - { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, - { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, - { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, - { "Wacom PL400", 8, 5408, 4056, 255, 0, PL }, - { "Wacom PL500", 8, 6144, 4608, 255, 0, PL }, - { "Wacom PL600", 8, 6126, 4604, 255, 0, PL }, - { "Wacom PL600SX", 8, 6260, 5016, 255, 0, PL }, - { "Wacom PL550", 8, 6144, 4608, 511, 0, PL }, - { "Wacom PL800", 8, 7220, 5780, 511, 0, PL }, - { "Wacom PL700", 8, 6758, 5406, 511, 0, PL }, - { "Wacom PL510", 8, 6282, 4762, 511, 0, PL }, - { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, - { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, - { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, - { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, - { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, - { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, - { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS }, - { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS }, - { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 63, INTUOS3S }, - { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 63, INTUOS3 }, - { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 63, INTUOS3 }, - { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L }, - { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L }, - { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, - { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, - { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, - { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, - { } -}; - -static struct usb_device_id wacom_ids[] = { - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, - { } -}; - -const struct usb_device_id * get_device_table(void) { - const struct usb_device_id * id_table = wacom_ids; - return id_table; -} - -struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { - int index = id - wacom_ids; - struct wacom_features *wf = &wacom_features[index]; - return wf; -} - -MODULE_DEVICE_TABLE(usb, wacom_ids); diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h deleted file mode 100644 index 8979366..0000000 --- a/drivers/usb/input/wacom_wac.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * drivers/usb/input/wacom_wac.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef WACOM_WAC_H -#define WACOM_WAC_H - -#define STYLUS_DEVICE_ID 0x02 -#define CURSOR_DEVICE_ID 0x06 -#define ERASER_DEVICE_ID 0x0A -#define PAD_DEVICE_ID 0x0F - -enum { - PENPARTNER = 0, - GRAPHIRE, - WACOM_G4, - PTU, - PL, - INTUOS, - INTUOS3S, - INTUOS3, - INTUOS3L, - CINTIQ, - MAX_TYPE -}; - -struct wacom_features { - char *name; - int pktlen; - int x_max; - int y_max; - int pressure_max; - int distance_max; - int type; -}; - -struct wacom_wac { - unsigned char *data; - int tool[2]; - int id[2]; - __u32 serial[2]; - struct wacom_features *features; -}; - -#endif -- cgit v1.1 From d05e84e6cb21cca16987813fd3c271ebaed4233d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 7 May 2007 16:38:49 -0400 Subject: Input: move USB touchscreens under drivers/input/touchscreen This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman --- drivers/input/touchscreen/Kconfig | 60 ++- drivers/input/touchscreen/Makefile | 17 +- drivers/input/touchscreen/usbtouchscreen.c | 839 +++++++++++++++++++++++++++++ drivers/usb/Makefile | 1 - drivers/usb/input/Kconfig | 54 -- drivers/usb/input/Makefile | 1 - drivers/usb/input/usbtouchscreen.c | 839 ----------------------------- 7 files changed, 905 insertions(+), 906 deletions(-) create mode 100644 drivers/input/touchscreen/usbtouchscreen.c delete mode 100644 drivers/usb/input/usbtouchscreen.c (limited to 'drivers') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 9716180..5e640ae 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1,5 +1,5 @@ # -# Mouse driver configuration +# Touchscreen driver configuration # menuconfig INPUT_TOUCHSCREEN bool "Touchscreens" @@ -44,9 +44,9 @@ config TOUCHSCREEN_BITSY config TOUCHSCREEN_CORGI tristate "SharpSL (Corgi and Spitz series) touchscreen driver" depends on PXA_SHARPSL - default y + default y help - Say Y here to enable the driver for the touchscreen on the + Say Y here to enable the driver for the touchscreen on the Sharp SL-C7xx and SL-Cxx00 series of PDAs. If unsure, say N. @@ -164,4 +164,58 @@ config TOUCHSCREEN_UCB1400 To compile this driver as a module, choose M here: the module will be called ucb1400_ts. +config TOUCHSCREEN_USB_COMPOSITE + tristate "USB Touchscreen Driver" + select USB + help + USB Touchscreen driver for: + - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) + - PanJit TouchSet USB + - 3M MicroTouch USB (EX II series) + - ITM + - some other eTurboTouch + - Gunze AHL61 + - DMC TSC-10/25 + + Have a look at for + a usage description and the required user-space stuff. + + To compile this driver as a module, choose M here: the + module will be called usbtouchscreen. + +config TOUCHSCREEN_USB_EGALAX + default y + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_PANJIT + default y + bool "PanJit device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_3M + default y + bool "3M/Microtouch EX II series device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ITM + default y + bool "ITM device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ETURBO + default y + bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_GUNZE + default y + bool "Gunze AHL61 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_DMC_TSC10 + default y + bool "DMC TSC-10/25 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 30e6e22..2f86d6a 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -1,17 +1,18 @@ # -# Makefile for the mouse drivers. +# Makefile for the touchscreen drivers. # # Each configuration option enables a list of files. obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o -obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o -obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o -obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o -obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o -obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o -obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o +obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o +obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o +obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o +obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o +obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c new file mode 100644 index 0000000..8e18e6c --- /dev/null +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -0,0 +1,839 @@ +/****************************************************************************** + * usbtouchscreen.c + * Driver for USB Touchscreens, supporting those devices: + * - eGalax Touchkit + * includes eTurboTouch CT-410/510/700 + * - 3M/Microtouch EX II series + * - ITM + * - PanJit TouchSet + * - eTurboTouch + * - Gunze AHL61 + * - DMC TSC-10/25 + * + * Copyright (C) 2004-2006 by Daniel Ritz + * Copyright (C) by Todd E. Johnson (mtouchusb.c) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Driver is based on touchkitusb.c + * - ITM parts are from itmtouch.c + * - 3M parts are from mtouchusb.c + * - PanJit parts are from an unmerged driver by Lanslott Gish + * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged + * driver from Marius Vollmer + * + *****************************************************************************/ + +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include + + +#define DRIVER_VERSION "v0.5" +#define DRIVER_AUTHOR "Daniel Ritz " +#define DRIVER_DESC "USB Touchscreen Driver" + +static int swap_xy; +module_param(swap_xy, bool, 0644); +MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); + +/* device specifc data/functions */ +struct usbtouch_usb; +struct usbtouch_device_info { + int min_xc, max_xc; + int min_yc, max_yc; + int min_press, max_press; + int rept_size; + int flags; + + void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); + int (*get_pkt_len) (unsigned char *pkt, int len); + int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); + int (*init) (struct usbtouch_usb *usbtouch); +}; + +#define USBTOUCH_FLG_BUFFER 0x01 + + +/* a usbtouch device */ +struct usbtouch_usb { + unsigned char *data; + dma_addr_t data_dma; + unsigned char *buffer; + int buf_len; + struct urb *irq; + struct usb_device *udev; + struct input_dev *input; + struct usbtouch_device_info *type; + char name[128]; + char phys[64]; + + int x, y; + int touch, press; +}; + + +#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO) +#define MULTI_PACKET +#endif + +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len); +#endif + +/* device types */ +enum { + DEVTPYE_DUMMY = -1, + DEVTYPE_EGALAX, + DEVTYPE_PANJIT, + DEVTYPE_3M, + DEVTYPE_ITM, + DEVTYPE_ETURBO, + DEVTYPE_GUNZE, + DEVTYPE_DMC_TSC10, +}; + +static struct usb_device_id usbtouch_devices[] = { +#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX + {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, + {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT + {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT}, + {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_3M + {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_ITM + {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO + {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE + {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, +#endif + + {} +}; + + +/***************************************************************************** + * eGalax part + */ + +#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX + +#define EGALAX_PKT_TYPE_MASK 0xFE +#define EGALAX_PKT_TYPE_REPT 0x80 +#define EGALAX_PKT_TYPE_DIAG 0x0A + +static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) + return 0; + + dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); + dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int egalax_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & EGALAX_PKT_TYPE_MASK) { + case EGALAX_PKT_TYPE_REPT: + return 5; + + case EGALAX_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif + + +/***************************************************************************** + * PanJit Part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT +static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + + +/***************************************************************************** + * 3M/Microtouch Part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_3M + +#define MTOUCHUSB_ASYNC_REPORT 1 +#define MTOUCHUSB_RESET 7 +#define MTOUCHUSB_REQ_CTRLLR_ID 10 + +static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[8] << 8) | pkt[7]; + dev->y = (pkt[10] << 8) | pkt[9]; + dev->touch = (pkt[2] & 0x40) ? 1 : 0; + + return 1; +} + +static int mtouch_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + + ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + MTOUCHUSB_RESET, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", + __FUNCTION__, ret); + if (ret < 0) + return ret; + msleep(150); + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + MTOUCHUSB_ASYNC_REPORT, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); + dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", + __FUNCTION__, ret); + if (ret >= 0) + break; + if (ret != -EPIPE) + return ret; + } + + return 0; +} +#endif + + +/***************************************************************************** + * ITM Part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_ITM +static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int touch; + /* + * ITM devices report invalid x/y data if not touched. + * if the screen was touched before but is not touched any more + * report touch as 0 with the last valid x/y data once. then stop + * reporting data until touched again. + */ + dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); + + touch = ~pkt[7] & 0x20; + if (!touch) { + if (dev->touch) { + dev->touch = 0; + return 1; + } + + return 0; + } + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = touch; + + return 1; +} +#endif + + +/***************************************************************************** + * eTurboTouch part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO +static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + unsigned int shift; + + /* packets should start with sync */ + if (!(pkt[0] & 0x80)) + return 0; + + shift = (6 - (pkt[0] & 0x03)); + dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; + dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; + dev->touch = (pkt[0] & 0x10) ? 1 : 0; + + return 1; +} + +static int eturbo_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return 3; + return 0; +} +#endif + + +/***************************************************************************** + * Gunze part + */ +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE +static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) + return 0; + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->touch = pkt[0] & 0x20; + + return 1; +} +#endif + +/***************************************************************************** + * DMC TSC-10/25 Part + * + * Documentation about the controller and it's protocol can be found at + * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf + * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf + */ +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + +/* supported data rates. currently using 130 */ +#define TSC10_RATE_POINT 0x50 +#define TSC10_RATE_30 0x40 +#define TSC10_RATE_50 0x41 +#define TSC10_RATE_80 0x42 +#define TSC10_RATE_100 0x43 +#define TSC10_RATE_130 0x44 +#define TSC10_RATE_150 0x45 + +/* commands */ +#define TSC10_CMD_RESET 0x55 +#define TSC10_CMD_RATE 0x05 +#define TSC10_CMD_DATA1 0x01 + +static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = usbtouch->udev; + int ret; + unsigned char buf[2]; + + /* reset */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* set coordinate output rate */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* start sending data */ + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + + return 0; +} + + +static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} +#endif + + +/***************************************************************************** + * the different device descriptors + */ +static struct usbtouch_device_info usbtouch_dev_info[] = { +#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX + [DEVTYPE_EGALAX] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .flags = USBTOUCH_FLG_BUFFER, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = egalax_get_pkt_len, + .read_data = egalax_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT + [DEVTYPE_PANJIT] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = panjit_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_3M + [DEVTYPE_3M] = { + .min_xc = 0x0, + .max_xc = 0x4000, + .min_yc = 0x0, + .max_yc = 0x4000, + .rept_size = 11, + .read_data = mtouch_read_data, + .init = mtouch_init, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_ITM + [DEVTYPE_ITM] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = itm_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO + [DEVTYPE_ETURBO] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 8, + .flags = USBTOUCH_FLG_BUFFER, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = eturbo_get_pkt_len, + .read_data = eturbo_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE + [DEVTYPE_GUNZE] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = gunze_read_data, + }, +#endif + +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + [DEVTYPE_DMC_TSC10] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, + }, +#endif +}; + + +/***************************************************************************** + * Generic Part + */ +static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + struct usbtouch_device_info *type = usbtouch->type; + + if (!type->read_data(usbtouch, pkt)) + return; + + input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); + + if (swap_xy) { + input_report_abs(usbtouch->input, ABS_X, usbtouch->y); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); + } else { + input_report_abs(usbtouch->input, ABS_X, usbtouch->x); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); + } + if (type->max_press) + input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); + input_sync(usbtouch->input); +} + + +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + unsigned char *buffer; + int pkt_len, pos, buf_len, tmp; + + /* process buffer */ + if (unlikely(usbtouch->buf_len)) { + /* try to get size */ + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + + /* drop? */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* need to append -pkt_len bytes before able to get size */ + if (unlikely(pkt_len < 0)) { + int append = -pkt_len; + if (unlikely(append > len)) + append = len; + if (usbtouch->buf_len + append >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); + usbtouch->buf_len += append; + + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + if (pkt_len < 0) + return; + } + + /* append */ + tmp = pkt_len - usbtouch->buf_len; + if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); + usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len); + + buffer = pkt + tmp; + buf_len = len - tmp; + } else { + buffer = pkt; + buf_len = len; + } + + /* loop over the received packet, process */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len); + + /* unknown packet: drop everything */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* full packet: process */ + if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { + usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len); + } else { + /* incomplete packet: save in buffer */ + memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); + usbtouch->buf_len = buf_len - pos; + return; + } + pos += pkt_len; + } + +out_flush_buf: + usbtouch->buf_len = 0; + return; +} +#endif + + +static void usbtouch_irq(struct urb *urb) +{ + struct usbtouch_usb *usbtouch = urb->context; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ETIME: + /* this urb is timing out */ + dbg("%s - urb timed out - was the device unplugged?", + __FUNCTION__); + return; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err("%s - usb_submit_urb failed with result: %d", + __FUNCTION__, retval); +} + +static int usbtouch_open(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + + usbtouch->irq->dev = usbtouch->udev; + + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void usbtouch_close(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + + usb_kill_urb(usbtouch->irq); +} + + +static void usbtouch_free_buffers(struct usb_device *udev, + struct usbtouch_usb *usbtouch) +{ + usb_buffer_free(udev, usbtouch->type->rept_size, + usbtouch->data, usbtouch->data_dma); + kfree(usbtouch->buffer); +} + + +static int usbtouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usbtouch_usb *usbtouch; + struct input_dev *input_dev; + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = interface_to_usbdev(intf); + struct usbtouch_device_info *type; + int err = -ENOMEM; + + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; + + usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!usbtouch || !input_dev) + goto out_free; + + type = &usbtouch_dev_info[id->driver_info]; + usbtouch->type = type; + if (!type->process_pkt) + type->process_pkt = usbtouch_process_pkt; + + usbtouch->data = usb_buffer_alloc(udev, type->rept_size, + GFP_KERNEL, &usbtouch->data_dma); + if (!usbtouch->data) + goto out_free; + + if (type->flags & USBTOUCH_FLG_BUFFER) { + usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); + if (!usbtouch->buffer) + goto out_free_buffers; + } + + usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!usbtouch->irq) { + dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__); + goto out_free_buffers; + } + + usbtouch->udev = udev; + usbtouch->input = input_dev; + + if (udev->manufacturer) + strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(usbtouch->name, " ", sizeof(usbtouch->name)); + strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name)); + } + + if (!strlen(usbtouch->name)) + snprintf(usbtouch->name, sizeof(usbtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); + strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); + + input_dev->name = usbtouch->name; + input_dev->phys = usbtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, usbtouch); + + input_dev->open = usbtouch_open; + input_dev->close = usbtouch_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); + input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); + if (type->max_press) + input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, + type->max_press, 0, 0); + + usb_fill_int_urb(usbtouch->irq, usbtouch->udev, + usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), + usbtouch->data, type->rept_size, + usbtouch_irq, usbtouch, endpoint->bInterval); + + usbtouch->irq->dev = usbtouch->udev; + usbtouch->irq->transfer_dma = usbtouch->data_dma; + usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* device specific init */ + if (type->init) { + err = type->init(usbtouch); + if (err) { + dbg("%s - type->init() failed, err: %d", __FUNCTION__, err); + goto out_free_buffers; + } + } + + err = input_register_device(usbtouch->input); + if (err) { + dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err); + goto out_free_buffers; + } + + usb_set_intfdata(intf, usbtouch); + + return 0; + +out_free_buffers: + usbtouch_free_buffers(udev, usbtouch); +out_free: + input_free_device(input_dev); + kfree(usbtouch); + return err; +} + +static void usbtouch_disconnect(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + dbg("%s - called", __FUNCTION__); + + if (!usbtouch) + return; + + dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__); + usb_set_intfdata(intf, NULL); + usb_kill_urb(usbtouch->irq); + input_unregister_device(usbtouch->input); + usb_free_urb(usbtouch->irq); + usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); + kfree(usbtouch); +} + +MODULE_DEVICE_TABLE(usb, usbtouch_devices); + +static struct usb_driver usbtouch_driver = { + .name = "usbtouchscreen", + .probe = usbtouch_probe, + .disconnect = usbtouch_disconnect, + .id_table = usbtouch_devices, +}; + +static int __init usbtouch_init(void) +{ + return usb_register(&usbtouch_driver); +} + +static void __exit usbtouch_cleanup(void) +{ + usb_deregister(&usbtouch_driver); +} + +module_init(usbtouch_init); +module_exit(usbtouch_cleanup); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS("touchkitusb"); +MODULE_ALIAS("itmtouch"); +MODULE_ALIAS("mtouchusb"); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index f786566..2b6caf6 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ -obj-$(CONFIG_USB_MTOUCH) += input/ obj-$(CONFIG_USB_POWERMATE) += input/ obj-$(CONFIG_USB_XPAD) += input/ diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 86cad90..68109a0 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -19,60 +19,6 @@ config USB_POWERMATE To compile this driver as a module, choose M here: the module will be called powermate. -config USB_TOUCHSCREEN - tristate "USB Touchscreen Driver" - depends on USB && INPUT - ---help--- - USB Touchscreen driver for: - - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) - - PanJit TouchSet USB - - 3M MicroTouch USB (EX II series) - - ITM - - some other eTurboTouch - - Gunze AHL61 - - DMC TSC-10/25 - - Have a look at for - a usage description and the required user-space stuff. - - To compile this driver as a module, choose M here: the - module will be called usbtouchscreen. - -config USB_TOUCHSCREEN_EGALAX - default y - bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_PANJIT - default y - bool "PanJit device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_3M - default y - bool "3M/Microtouch EX II series device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ITM - default y - bool "ITM device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ETURBO - default y - bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_GUNZE - default y - bool "Gunze AHL61 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_DMC_TSC10 - default y - bool "DMC TSC-10/25 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - config USB_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index a9e9b2f..c8b843c 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_USB_TOUCHSCREEN) += usbtouchscreen.o obj-$(CONFIG_USB_POWERMATE) += powermate.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c deleted file mode 100644 index 8e18e6c..0000000 --- a/drivers/usb/input/usbtouchscreen.c +++ /dev/null @@ -1,839 +0,0 @@ -/****************************************************************************** - * usbtouchscreen.c - * Driver for USB Touchscreens, supporting those devices: - * - eGalax Touchkit - * includes eTurboTouch CT-410/510/700 - * - 3M/Microtouch EX II series - * - ITM - * - PanJit TouchSet - * - eTurboTouch - * - Gunze AHL61 - * - DMC TSC-10/25 - * - * Copyright (C) 2004-2006 by Daniel Ritz - * Copyright (C) by Todd E. Johnson (mtouchusb.c) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Driver is based on touchkitusb.c - * - ITM parts are from itmtouch.c - * - 3M parts are from mtouchusb.c - * - PanJit parts are from an unmerged driver by Lanslott Gish - * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged - * driver from Marius Vollmer - * - *****************************************************************************/ - -//#define DEBUG - -#include -#include -#include -#include -#include -#include -#include - - -#define DRIVER_VERSION "v0.5" -#define DRIVER_AUTHOR "Daniel Ritz " -#define DRIVER_DESC "USB Touchscreen Driver" - -static int swap_xy; -module_param(swap_xy, bool, 0644); -MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); - -/* device specifc data/functions */ -struct usbtouch_usb; -struct usbtouch_device_info { - int min_xc, max_xc; - int min_yc, max_yc; - int min_press, max_press; - int rept_size; - int flags; - - void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); - int (*get_pkt_len) (unsigned char *pkt, int len); - int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); - int (*init) (struct usbtouch_usb *usbtouch); -}; - -#define USBTOUCH_FLG_BUFFER 0x01 - - -/* a usbtouch device */ -struct usbtouch_usb { - unsigned char *data; - dma_addr_t data_dma; - unsigned char *buffer; - int buf_len; - struct urb *irq; - struct usb_device *udev; - struct input_dev *input; - struct usbtouch_device_info *type; - char name[128]; - char phys[64]; - - int x, y; - int touch, press; -}; - - -#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO) -#define MULTI_PACKET -#endif - -#ifdef MULTI_PACKET -static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, - unsigned char *pkt, int len); -#endif - -/* device types */ -enum { - DEVTPYE_DUMMY = -1, - DEVTYPE_EGALAX, - DEVTYPE_PANJIT, - DEVTYPE_3M, - DEVTYPE_ITM, - DEVTYPE_ETURBO, - DEVTYPE_GUNZE, - DEVTYPE_DMC_TSC10, -}; - -static struct usb_device_id usbtouch_devices[] = { -#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX - {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT - {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_3M - {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_ITM - {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO - {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE - {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 - {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, -#endif - - {} -}; - - -/***************************************************************************** - * eGalax part - */ - -#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX - -#define EGALAX_PKT_TYPE_MASK 0xFE -#define EGALAX_PKT_TYPE_REPT 0x80 -#define EGALAX_PKT_TYPE_DIAG 0x0A - -static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) - return 0; - - dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); - dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); - dev->touch = pkt[0] & 0x01; - - return 1; -} - -static int egalax_get_pkt_len(unsigned char *buf, int len) -{ - switch (buf[0] & EGALAX_PKT_TYPE_MASK) { - case EGALAX_PKT_TYPE_REPT: - return 5; - - case EGALAX_PKT_TYPE_DIAG: - if (len < 2) - return -1; - - return buf[1] + 2; - } - - return 0; -} -#endif - - -/***************************************************************************** - * PanJit Part - */ -#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT -static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; - dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; - dev->touch = pkt[0] & 0x01; - - return 1; -} -#endif - - -/***************************************************************************** - * 3M/Microtouch Part - */ -#ifdef CONFIG_USB_TOUCHSCREEN_3M - -#define MTOUCHUSB_ASYNC_REPORT 1 -#define MTOUCHUSB_RESET 7 -#define MTOUCHUSB_REQ_CTRLLR_ID 10 - -static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - dev->x = (pkt[8] << 8) | pkt[7]; - dev->y = (pkt[10] << 8) | pkt[9]; - dev->touch = (pkt[2] & 0x40) ? 1 : 0; - - return 1; -} - -static int mtouch_init(struct usbtouch_usb *usbtouch) -{ - int ret, i; - - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), - MTOUCHUSB_RESET, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", - __FUNCTION__, ret); - if (ret < 0) - return ret; - msleep(150); - - for (i = 0; i < 3; i++) { - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), - MTOUCHUSB_ASYNC_REPORT, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", - __FUNCTION__, ret); - if (ret >= 0) - break; - if (ret != -EPIPE) - return ret; - } - - return 0; -} -#endif - - -/***************************************************************************** - * ITM Part - */ -#ifdef CONFIG_USB_TOUCHSCREEN_ITM -static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - int touch; - /* - * ITM devices report invalid x/y data if not touched. - * if the screen was touched before but is not touched any more - * report touch as 0 with the last valid x/y data once. then stop - * reporting data until touched again. - */ - dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); - - touch = ~pkt[7] & 0x20; - if (!touch) { - if (dev->touch) { - dev->touch = 0; - return 1; - } - - return 0; - } - - dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); - dev->touch = touch; - - return 1; -} -#endif - - -/***************************************************************************** - * eTurboTouch part - */ -#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO -static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - unsigned int shift; - - /* packets should start with sync */ - if (!(pkt[0] & 0x80)) - return 0; - - shift = (6 - (pkt[0] & 0x03)); - dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; - dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; - dev->touch = (pkt[0] & 0x10) ? 1 : 0; - - return 1; -} - -static int eturbo_get_pkt_len(unsigned char *buf, int len) -{ - if (buf[0] & 0x80) - return 5; - if (buf[0] == 0x01) - return 3; - return 0; -} -#endif - - -/***************************************************************************** - * Gunze part - */ -#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE -static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) - return 0; - - dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); - dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); - dev->touch = pkt[0] & 0x20; - - return 1; -} -#endif - -/***************************************************************************** - * DMC TSC-10/25 Part - * - * Documentation about the controller and it's protocol can be found at - * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf - * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf - */ -#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 - -/* supported data rates. currently using 130 */ -#define TSC10_RATE_POINT 0x50 -#define TSC10_RATE_30 0x40 -#define TSC10_RATE_50 0x41 -#define TSC10_RATE_80 0x42 -#define TSC10_RATE_100 0x43 -#define TSC10_RATE_130 0x44 -#define TSC10_RATE_150 0x45 - -/* commands */ -#define TSC10_CMD_RESET 0x55 -#define TSC10_CMD_RATE 0x05 -#define TSC10_CMD_DATA1 0x01 - -static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) -{ - struct usb_device *dev = usbtouch->udev; - int ret; - unsigned char buf[2]; - - /* reset */ - buf[0] = buf[1] = 0xFF; - ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), - TSC10_CMD_RESET, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); - if (ret < 0) - return ret; - if (buf[0] != 0x06 || buf[1] != 0x00) - return -ENODEV; - - /* set coordinate output rate */ - buf[0] = buf[1] = 0xFF; - ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), - TSC10_CMD_RATE, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); - if (ret < 0) - return ret; - if (buf[0] != 0x06 || buf[1] != 0x00) - return -ENODEV; - - /* start sending data */ - ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), - TSC10_CMD_DATA1, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret < 0) - return ret; - - return 0; -} - - -static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) -{ - dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; - dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; - dev->touch = pkt[0] & 0x01; - - return 1; -} -#endif - - -/***************************************************************************** - * the different device descriptors - */ -static struct usbtouch_device_info usbtouch_dev_info[] = { -#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX - [DEVTYPE_EGALAX] = { - .min_xc = 0x0, - .max_xc = 0x07ff, - .min_yc = 0x0, - .max_yc = 0x07ff, - .rept_size = 16, - .flags = USBTOUCH_FLG_BUFFER, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = egalax_get_pkt_len, - .read_data = egalax_read_data, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT - [DEVTYPE_PANJIT] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 8, - .read_data = panjit_read_data, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_3M - [DEVTYPE_3M] = { - .min_xc = 0x0, - .max_xc = 0x4000, - .min_yc = 0x0, - .max_yc = 0x4000, - .rept_size = 11, - .read_data = mtouch_read_data, - .init = mtouch_init, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_ITM - [DEVTYPE_ITM] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .max_press = 0xff, - .rept_size = 8, - .read_data = itm_read_data, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO - [DEVTYPE_ETURBO] = { - .min_xc = 0x0, - .max_xc = 0x07ff, - .min_yc = 0x0, - .max_yc = 0x07ff, - .rept_size = 8, - .flags = USBTOUCH_FLG_BUFFER, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = eturbo_get_pkt_len, - .read_data = eturbo_read_data, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE - [DEVTYPE_GUNZE] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 4, - .read_data = gunze_read_data, - }, -#endif - -#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 - [DEVTYPE_DMC_TSC10] = { - .min_xc = 0x0, - .max_xc = 0x03ff, - .min_yc = 0x0, - .max_yc = 0x03ff, - .rept_size = 5, - .init = dmc_tsc10_init, - .read_data = dmc_tsc10_read_data, - }, -#endif -}; - - -/***************************************************************************** - * Generic Part - */ -static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, - unsigned char *pkt, int len) -{ - struct usbtouch_device_info *type = usbtouch->type; - - if (!type->read_data(usbtouch, pkt)) - return; - - input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); - - if (swap_xy) { - input_report_abs(usbtouch->input, ABS_X, usbtouch->y); - input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); - } else { - input_report_abs(usbtouch->input, ABS_X, usbtouch->x); - input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); - } - if (type->max_press) - input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); - input_sync(usbtouch->input); -} - - -#ifdef MULTI_PACKET -static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, - unsigned char *pkt, int len) -{ - unsigned char *buffer; - int pkt_len, pos, buf_len, tmp; - - /* process buffer */ - if (unlikely(usbtouch->buf_len)) { - /* try to get size */ - pkt_len = usbtouch->type->get_pkt_len( - usbtouch->buffer, usbtouch->buf_len); - - /* drop? */ - if (unlikely(!pkt_len)) - goto out_flush_buf; - - /* need to append -pkt_len bytes before able to get size */ - if (unlikely(pkt_len < 0)) { - int append = -pkt_len; - if (unlikely(append > len)) - append = len; - if (usbtouch->buf_len + append >= usbtouch->type->rept_size) - goto out_flush_buf; - memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); - usbtouch->buf_len += append; - - pkt_len = usbtouch->type->get_pkt_len( - usbtouch->buffer, usbtouch->buf_len); - if (pkt_len < 0) - return; - } - - /* append */ - tmp = pkt_len - usbtouch->buf_len; - if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) - goto out_flush_buf; - memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); - usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len); - - buffer = pkt + tmp; - buf_len = len - tmp; - } else { - buffer = pkt; - buf_len = len; - } - - /* loop over the received packet, process */ - pos = 0; - while (pos < buf_len) { - /* get packet len */ - pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len); - - /* unknown packet: drop everything */ - if (unlikely(!pkt_len)) - goto out_flush_buf; - - /* full packet: process */ - if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { - usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len); - } else { - /* incomplete packet: save in buffer */ - memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); - usbtouch->buf_len = buf_len - pos; - return; - } - pos += pkt_len; - } - -out_flush_buf: - usbtouch->buf_len = 0; - return; -} -#endif - - -static void usbtouch_irq(struct urb *urb) -{ - struct usbtouch_usb *usbtouch = urb->context; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ETIME: - /* this urb is timing out */ - dbg("%s - urb timed out - was the device unplugged?", - __FUNCTION__); - return; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); - goto exit; - } - - usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); - -exit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - err("%s - usb_submit_urb failed with result: %d", - __FUNCTION__, retval); -} - -static int usbtouch_open(struct input_dev *input) -{ - struct usbtouch_usb *usbtouch = input_get_drvdata(input); - - usbtouch->irq->dev = usbtouch->udev; - - if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void usbtouch_close(struct input_dev *input) -{ - struct usbtouch_usb *usbtouch = input_get_drvdata(input); - - usb_kill_urb(usbtouch->irq); -} - - -static void usbtouch_free_buffers(struct usb_device *udev, - struct usbtouch_usb *usbtouch) -{ - usb_buffer_free(udev, usbtouch->type->rept_size, - usbtouch->data, usbtouch->data_dma); - kfree(usbtouch->buffer); -} - - -static int usbtouch_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usbtouch_usb *usbtouch; - struct input_dev *input_dev; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct usb_device *udev = interface_to_usbdev(intf); - struct usbtouch_device_info *type; - int err = -ENOMEM; - - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - - usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!usbtouch || !input_dev) - goto out_free; - - type = &usbtouch_dev_info[id->driver_info]; - usbtouch->type = type; - if (!type->process_pkt) - type->process_pkt = usbtouch_process_pkt; - - usbtouch->data = usb_buffer_alloc(udev, type->rept_size, - GFP_KERNEL, &usbtouch->data_dma); - if (!usbtouch->data) - goto out_free; - - if (type->flags & USBTOUCH_FLG_BUFFER) { - usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); - if (!usbtouch->buffer) - goto out_free_buffers; - } - - usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!usbtouch->irq) { - dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__); - goto out_free_buffers; - } - - usbtouch->udev = udev; - usbtouch->input = input_dev; - - if (udev->manufacturer) - strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name)); - - if (udev->product) { - if (udev->manufacturer) - strlcat(usbtouch->name, " ", sizeof(usbtouch->name)); - strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name)); - } - - if (!strlen(usbtouch->name)) - snprintf(usbtouch->name, sizeof(usbtouch->name), - "USB Touchscreen %04x:%04x", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - - usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); - strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); - - input_dev->name = usbtouch->name; - input_dev->phys = usbtouch->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, usbtouch); - - input_dev->open = usbtouch_open; - input_dev->close = usbtouch_close; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); - input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); - if (type->max_press) - input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, - type->max_press, 0, 0); - - usb_fill_int_urb(usbtouch->irq, usbtouch->udev, - usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), - usbtouch->data, type->rept_size, - usbtouch_irq, usbtouch, endpoint->bInterval); - - usbtouch->irq->dev = usbtouch->udev; - usbtouch->irq->transfer_dma = usbtouch->data_dma; - usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* device specific init */ - if (type->init) { - err = type->init(usbtouch); - if (err) { - dbg("%s - type->init() failed, err: %d", __FUNCTION__, err); - goto out_free_buffers; - } - } - - err = input_register_device(usbtouch->input); - if (err) { - dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err); - goto out_free_buffers; - } - - usb_set_intfdata(intf, usbtouch); - - return 0; - -out_free_buffers: - usbtouch_free_buffers(udev, usbtouch); -out_free: - input_free_device(input_dev); - kfree(usbtouch); - return err; -} - -static void usbtouch_disconnect(struct usb_interface *intf) -{ - struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - - dbg("%s - called", __FUNCTION__); - - if (!usbtouch) - return; - - dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__); - usb_set_intfdata(intf, NULL); - usb_kill_urb(usbtouch->irq); - input_unregister_device(usbtouch->input); - usb_free_urb(usbtouch->irq); - usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); - kfree(usbtouch); -} - -MODULE_DEVICE_TABLE(usb, usbtouch_devices); - -static struct usb_driver usbtouch_driver = { - .name = "usbtouchscreen", - .probe = usbtouch_probe, - .disconnect = usbtouch_disconnect, - .id_table = usbtouch_devices, -}; - -static int __init usbtouch_init(void) -{ - return usb_register(&usbtouch_driver); -} - -static void __exit usbtouch_cleanup(void) -{ - usb_deregister(&usbtouch_driver); -} - -module_init(usbtouch_init); -module_exit(usbtouch_cleanup); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - -MODULE_ALIAS("touchkitusb"); -MODULE_ALIAS("itmtouch"); -MODULE_ALIAS("mtouchusb"); -- cgit v1.1 From 1c362d46825259a48c1d543cab3805a6c770c0c8 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 7 May 2007 16:48:50 -0400 Subject: Input: move USB gamepads under drivers/input/joystick This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman --- drivers/input/joystick/Kconfig | 18 +- drivers/input/joystick/Makefile | 1 + drivers/input/joystick/xpad.c | 434 ++++++++++++++++++++++++++++++++++++++++ drivers/usb/Makefile | 1 - drivers/usb/input/Kconfig | 14 -- drivers/usb/input/Makefile | 1 - drivers/usb/input/xpad.c | 434 ---------------------------------------- 7 files changed, 451 insertions(+), 452 deletions(-) create mode 100644 drivers/input/joystick/xpad.c delete mode 100644 drivers/usb/input/xpad.c (limited to 'drivers') diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 2712634..82f563e 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -2,7 +2,7 @@ # Joystick driver configuration # menuconfig INPUT_JOYSTICK - bool "Joysticks" + bool "Joysticks/Gamepads" help If you have a joystick, 6dof controller, gamepad, steering wheel, weapon control system or something like that you can say Y here @@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT - ---help--- + help Say Y here if you have a Sega Master System gamepad, Sega Genesis gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. @@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP To compile this driver as a module, choose M here: the module will be called joydump. +config JOYSTICK_XPAD + tristate "X-Box gamepad support" + select USB + help + Say Y here if you want to use the X-Box pad with your computer. + Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) + and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. + + For information about how to connect the X-Box pad to USB, see + . + + To compile this driver as a module, choose M here: the + module will be called xpad. + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 5231f6f..e855abb 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o +obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c new file mode 100644 index 0000000..7357239 --- /dev/null +++ b/drivers/input/joystick/xpad.c @@ -0,0 +1,434 @@ +/* + * X-Box gamepad - v0.0.6 + * + * Copyright (c) 2002 Marko Friedemann + * 2004 Oliver Schwartz , + * Steven Toth , + * Franz Lehner , + * Ivan Hawkes + * 2005 Dominic Cerquetti + * 2006 Adam Buchbinder + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * This driver is based on: + * - information from http://euc.jp/periphs/xbox-controller.ja.html + * - the iForce driver drivers/char/joystick/iforce.c + * - the skeleton-driver drivers/usb/usb-skeleton.c + * + * Thanks to: + * - ITO Takayuki for providing essential xpad information on his website + * - Vojtech Pavlik - iforce driver / input subsystem + * - Greg Kroah-Hartman - usb-skeleton driver + * - XBOX Linux project - extra USB id's + * + * TODO: + * - fine tune axes (especially trigger axes) + * - fix "analog" buttons (reported as digital now) + * - get rumble working + * - need USB IDs for other dance pads + * + * History: + * + * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller" + * + * 2002-07-02 - 0.0.2 : basic working version + * - all axes and 9 of the 10 buttons work (german InterAct device) + * - the black button does not work + * + * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik + * - indentation fixes + * - usb + input init sequence fixes + * + * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3 + * - verified the lack of HID and report descriptors + * - verified that ALL buttons WORK + * - fixed d-pad to axes mapping + * + * 2002-07-17 - 0.0.5 : simplified d-pad handling + * + * 2004-10-02 - 0.0.6 : DDR pad support + * - borrowed from the XBOX linux kernel + * - USB id's for commonly used dance pads are present + * - dance pads will map D-PAD to buttons, not axes + * - pass the module paramater 'dpad_to_buttons' to force + * the D-PAD to map to buttons if your pad is not detected + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "v0.0.6" +#define DRIVER_AUTHOR "Marko Friedemann " +#define DRIVER_DESC "X-Box pad driver" + +#define XPAD_PKT_LEN 32 + +/* xbox d-pads should map to buttons, as is required for DDR pads + but we map them to axes when possible to simplify things */ +#define MAP_DPAD_TO_BUTTONS 0 +#define MAP_DPAD_TO_AXES 1 +#define MAP_DPAD_UNKNOWN -1 + +static int dpad_to_buttons; +module_param(dpad_to_buttons, bool, S_IRUGO); +MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); + +static const struct xpad_device { + u16 idVendor; + u16 idProduct; + char *name; + u8 dpad_mapping; +} xpad_device[] = { + { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, + { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, + { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, + { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, + { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, + { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, + { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } +}; + +static const signed short xpad_btn[] = { + BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */ + BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ + -1 /* terminating entry */ +}; + +/* only used if MAP_DPAD_TO_BUTTONS */ +static const signed short xpad_btn_pad[] = { + BTN_LEFT, BTN_RIGHT, /* d-pad left, right */ + BTN_0, BTN_1, /* d-pad up, down (XXX names??) */ + -1 /* terminating entry */ +}; + +static const signed short xpad_abs[] = { + ABS_X, ABS_Y, /* left stick */ + ABS_RX, ABS_RY, /* right stick */ + ABS_Z, ABS_RZ, /* triggers left/right */ + -1 /* terminating entry */ +}; + +/* only used if MAP_DPAD_TO_AXES */ +static const signed short xpad_abs_pad[] = { + ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ + -1 /* terminating entry */ +}; + +static struct usb_device_id xpad_table [] = { + { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ + { } +}; + +MODULE_DEVICE_TABLE (usb, xpad_table); + +struct usb_xpad { + struct input_dev *dev; /* input device interface */ + struct usb_device *udev; /* usb device */ + + struct urb *irq_in; /* urb for interrupt in report */ + unsigned char *idata; /* input data */ + dma_addr_t idata_dma; + + char phys[65]; /* physical device path */ + + int dpad_mapping; /* map d-pad to buttons or to axes */ +}; + +/* + * xpad_process_packet + * + * Completes a request by converting the data into events for the + * input subsystem. + * + * The used report descriptor was taken from ITO Takayukis website: + * http://euc.jp/periphs/xbox-controller.ja.html + */ + +static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) +{ + struct input_dev *dev = xpad->dev; + + /* left stick */ + input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12])); + input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14])); + + /* right stick */ + input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16])); + input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18])); + + /* triggers left/right */ + input_report_abs(dev, ABS_Z, data[10]); + input_report_abs(dev, ABS_RZ, data[11]); + + /* digital pad */ + if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { + input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); + input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); + } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { + input_report_key(dev, BTN_LEFT, data[2] & 0x04); + input_report_key(dev, BTN_RIGHT, data[2] & 0x08); + input_report_key(dev, BTN_0, data[2] & 0x01); // up + input_report_key(dev, BTN_1, data[2] & 0x02); // down + } + + /* start/back buttons and stick press left/right */ + input_report_key(dev, BTN_START, data[2] & 0x10); + input_report_key(dev, BTN_BACK, data[2] & 0x20); + input_report_key(dev, BTN_THUMBL, data[2] & 0x40); + input_report_key(dev, BTN_THUMBR, data[2] & 0x80); + + /* "analog" buttons A, B, X, Y */ + input_report_key(dev, BTN_A, data[4]); + input_report_key(dev, BTN_B, data[5]); + input_report_key(dev, BTN_X, data[6]); + input_report_key(dev, BTN_Y, data[7]); + + /* "analog" buttons black, white */ + input_report_key(dev, BTN_C, data[8]); + input_report_key(dev, BTN_Z, data[9]); + + input_sync(dev); +} + +static void xpad_irq_in(struct urb *urb) +{ + struct usb_xpad *xpad = urb->context; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + xpad_process_packet(xpad, 0, xpad->idata); + +exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +static int xpad_open (struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + xpad->irq_in->dev = xpad->udev; + if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void xpad_close (struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + usb_kill_urb(xpad->irq_in); +} + +static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) +{ + set_bit(abs, input_dev->absbit); + + switch (abs) { + case ABS_X: + case ABS_Y: + case ABS_RX: + case ABS_RY: /* the two sticks */ + input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); + break; + case ABS_Z: + case ABS_RZ: /* the triggers */ + input_set_abs_params(input_dev, abs, 0, 255, 0, 0); + break; + case ABS_HAT0X: + case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */ + input_set_abs_params(input_dev, abs, -1, 1, 0, 0); + break; + } +} + +static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev (intf); + struct usb_xpad *xpad; + struct input_dev *input_dev; + struct usb_endpoint_descriptor *ep_irq_in; + int i; + int error = -ENOMEM; + + for (i = 0; xpad_device[i].idVendor; i++) { + if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && + (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct)) + break; + } + + xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xpad || !input_dev) + goto fail1; + + xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, + GFP_ATOMIC, &xpad->idata_dma); + if (!xpad->idata) + goto fail1; + + xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); + if (!xpad->irq_in) + goto fail2; + + xpad->udev = udev; + xpad->dpad_mapping = xpad_device[i].dpad_mapping; + if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) + xpad->dpad_mapping = dpad_to_buttons; + xpad->dev = input_dev; + usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); + strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); + + input_dev->name = xpad_device[i].name; + input_dev->phys = xpad->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, xpad); + + input_dev->open = xpad_open; + input_dev->close = xpad_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + + /* set up buttons */ + for (i = 0; xpad_btn[i] >= 0; i++) + set_bit(xpad_btn[i], input_dev->keybit); + if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) + for (i = 0; xpad_btn_pad[i] >= 0; i++) + set_bit(xpad_btn_pad[i], input_dev->keybit); + + /* set up axes */ + for (i = 0; xpad_abs[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs[i]); + if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) + for (i = 0; xpad_abs_pad[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs_pad[i]); + + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(xpad->irq_in, udev, + usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), + xpad->idata, XPAD_PKT_LEN, xpad_irq_in, + xpad, ep_irq_in->bInterval); + xpad->irq_in->transfer_dma = xpad->idata_dma; + xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = input_register_device(xpad->dev); + if (error) + goto fail3; + + usb_set_intfdata(intf, xpad); + return 0; + + fail3: usb_free_urb(xpad->irq_in); + fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); + fail1: input_free_device(input_dev); + kfree(xpad); + return error; + +} + +static void xpad_disconnect(struct usb_interface *intf) +{ + struct usb_xpad *xpad = usb_get_intfdata (intf); + + usb_set_intfdata(intf, NULL); + if (xpad) { + usb_kill_urb(xpad->irq_in); + input_unregister_device(xpad->dev); + usb_free_urb(xpad->irq_in); + usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, + xpad->idata, xpad->idata_dma); + kfree(xpad); + } +} + +static struct usb_driver xpad_driver = { + .name = "xpad", + .probe = xpad_probe, + .disconnect = xpad_disconnect, + .id_table = xpad_table, +}; + +static int __init usb_xpad_init(void) +{ + int result = usb_register(&xpad_driver); + if (result == 0) + info(DRIVER_DESC ":" DRIVER_VERSION); + return result; +} + +static void __exit usb_xpad_exit(void) +{ + usb_deregister(&xpad_driver); +} + +module_init(usb_xpad_init); +module_exit(usb_xpad_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 2b6caf6..7059a64 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_USB) += storage/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ obj-$(CONFIG_USB_POWERMATE) += input/ -obj-$(CONFIG_USB_XPAD) += input/ obj-$(CONFIG_USB_CATC) += net/ obj-$(CONFIG_USB_KAWETH) += net/ diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 68109a0..1922878 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -33,20 +33,6 @@ config USB_YEALINK To compile this driver as a module, choose M here: the module will be called yealink. -config USB_XPAD - tristate "X-Box gamepad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the X-Box pad with your computer. - Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) - and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. - - For information about how to connect the X-Box pad to USB, see - . - - To compile this driver as a module, choose M here: the - module will be called xpad. - config USB_ATI_REMOTE tristate "ATI / X10 USB RF remote control" depends on USB && INPUT diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index c8b843c..d2cbb0e 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_USB_POWERMATE) += powermate.o obj-$(CONFIG_USB_YEALINK) += yealink.o -obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o ifeq ($(CONFIG_USB_DEBUG),y) diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c deleted file mode 100644 index 7357239..0000000 --- a/drivers/usb/input/xpad.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * X-Box gamepad - v0.0.6 - * - * Copyright (c) 2002 Marko Friedemann - * 2004 Oliver Schwartz , - * Steven Toth , - * Franz Lehner , - * Ivan Hawkes - * 2005 Dominic Cerquetti - * 2006 Adam Buchbinder - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * This driver is based on: - * - information from http://euc.jp/periphs/xbox-controller.ja.html - * - the iForce driver drivers/char/joystick/iforce.c - * - the skeleton-driver drivers/usb/usb-skeleton.c - * - * Thanks to: - * - ITO Takayuki for providing essential xpad information on his website - * - Vojtech Pavlik - iforce driver / input subsystem - * - Greg Kroah-Hartman - usb-skeleton driver - * - XBOX Linux project - extra USB id's - * - * TODO: - * - fine tune axes (especially trigger axes) - * - fix "analog" buttons (reported as digital now) - * - get rumble working - * - need USB IDs for other dance pads - * - * History: - * - * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller" - * - * 2002-07-02 - 0.0.2 : basic working version - * - all axes and 9 of the 10 buttons work (german InterAct device) - * - the black button does not work - * - * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik - * - indentation fixes - * - usb + input init sequence fixes - * - * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3 - * - verified the lack of HID and report descriptors - * - verified that ALL buttons WORK - * - fixed d-pad to axes mapping - * - * 2002-07-17 - 0.0.5 : simplified d-pad handling - * - * 2004-10-02 - 0.0.6 : DDR pad support - * - borrowed from the XBOX linux kernel - * - USB id's for commonly used dance pads are present - * - dance pads will map D-PAD to buttons, not axes - * - pass the module paramater 'dpad_to_buttons' to force - * the D-PAD to map to buttons if your pad is not detected - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_VERSION "v0.0.6" -#define DRIVER_AUTHOR "Marko Friedemann " -#define DRIVER_DESC "X-Box pad driver" - -#define XPAD_PKT_LEN 32 - -/* xbox d-pads should map to buttons, as is required for DDR pads - but we map them to axes when possible to simplify things */ -#define MAP_DPAD_TO_BUTTONS 0 -#define MAP_DPAD_TO_AXES 1 -#define MAP_DPAD_UNKNOWN -1 - -static int dpad_to_buttons; -module_param(dpad_to_buttons, bool, S_IRUGO); -MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); - -static const struct xpad_device { - u16 idVendor; - u16 idProduct; - char *name; - u8 dpad_mapping; -} xpad_device[] = { - { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, - { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, - { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, - { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, - { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, - { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, - { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, - { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, - { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, - { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, - { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, - { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, - { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, - { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, - { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } -}; - -static const signed short xpad_btn[] = { - BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */ - BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ - -1 /* terminating entry */ -}; - -/* only used if MAP_DPAD_TO_BUTTONS */ -static const signed short xpad_btn_pad[] = { - BTN_LEFT, BTN_RIGHT, /* d-pad left, right */ - BTN_0, BTN_1, /* d-pad up, down (XXX names??) */ - -1 /* terminating entry */ -}; - -static const signed short xpad_abs[] = { - ABS_X, ABS_Y, /* left stick */ - ABS_RX, ABS_RY, /* right stick */ - ABS_Z, ABS_RZ, /* triggers left/right */ - -1 /* terminating entry */ -}; - -/* only used if MAP_DPAD_TO_AXES */ -static const signed short xpad_abs_pad[] = { - ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ - -1 /* terminating entry */ -}; - -static struct usb_device_id xpad_table [] = { - { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ - { } -}; - -MODULE_DEVICE_TABLE (usb, xpad_table); - -struct usb_xpad { - struct input_dev *dev; /* input device interface */ - struct usb_device *udev; /* usb device */ - - struct urb *irq_in; /* urb for interrupt in report */ - unsigned char *idata; /* input data */ - dma_addr_t idata_dma; - - char phys[65]; /* physical device path */ - - int dpad_mapping; /* map d-pad to buttons or to axes */ -}; - -/* - * xpad_process_packet - * - * Completes a request by converting the data into events for the - * input subsystem. - * - * The used report descriptor was taken from ITO Takayukis website: - * http://euc.jp/periphs/xbox-controller.ja.html - */ - -static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) -{ - struct input_dev *dev = xpad->dev; - - /* left stick */ - input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12])); - input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14])); - - /* right stick */ - input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16])); - input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18])); - - /* triggers left/right */ - input_report_abs(dev, ABS_Z, data[10]); - input_report_abs(dev, ABS_RZ, data[11]); - - /* digital pad */ - if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { - input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); - input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); - } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { - input_report_key(dev, BTN_LEFT, data[2] & 0x04); - input_report_key(dev, BTN_RIGHT, data[2] & 0x08); - input_report_key(dev, BTN_0, data[2] & 0x01); // up - input_report_key(dev, BTN_1, data[2] & 0x02); // down - } - - /* start/back buttons and stick press left/right */ - input_report_key(dev, BTN_START, data[2] & 0x10); - input_report_key(dev, BTN_BACK, data[2] & 0x20); - input_report_key(dev, BTN_THUMBL, data[2] & 0x40); - input_report_key(dev, BTN_THUMBR, data[2] & 0x80); - - /* "analog" buttons A, B, X, Y */ - input_report_key(dev, BTN_A, data[4]); - input_report_key(dev, BTN_B, data[5]); - input_report_key(dev, BTN_X, data[6]); - input_report_key(dev, BTN_Y, data[7]); - - /* "analog" buttons black, white */ - input_report_key(dev, BTN_C, data[8]); - input_report_key(dev, BTN_Z, data[9]); - - input_sync(dev); -} - -static void xpad_irq_in(struct urb *urb) -{ - struct usb_xpad *xpad = urb->context; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - xpad_process_packet(xpad, 0, xpad->idata); - -exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -static int xpad_open (struct input_dev *dev) -{ - struct usb_xpad *xpad = input_get_drvdata(dev); - - xpad->irq_in->dev = xpad->udev; - if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void xpad_close (struct input_dev *dev) -{ - struct usb_xpad *xpad = input_get_drvdata(dev); - - usb_kill_urb(xpad->irq_in); -} - -static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) -{ - set_bit(abs, input_dev->absbit); - - switch (abs) { - case ABS_X: - case ABS_Y: - case ABS_RX: - case ABS_RY: /* the two sticks */ - input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); - break; - case ABS_Z: - case ABS_RZ: /* the triggers */ - input_set_abs_params(input_dev, abs, 0, 255, 0, 0); - break; - case ABS_HAT0X: - case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */ - input_set_abs_params(input_dev, abs, -1, 1, 0, 0); - break; - } -} - -static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev (intf); - struct usb_xpad *xpad; - struct input_dev *input_dev; - struct usb_endpoint_descriptor *ep_irq_in; - int i; - int error = -ENOMEM; - - for (i = 0; xpad_device[i].idVendor; i++) { - if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && - (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct)) - break; - } - - xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!xpad || !input_dev) - goto fail1; - - xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, - GFP_ATOMIC, &xpad->idata_dma); - if (!xpad->idata) - goto fail1; - - xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_in) - goto fail2; - - xpad->udev = udev; - xpad->dpad_mapping = xpad_device[i].dpad_mapping; - if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) - xpad->dpad_mapping = dpad_to_buttons; - xpad->dev = input_dev; - usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); - strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); - - input_dev->name = xpad_device[i].name; - input_dev->phys = xpad->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, xpad); - - input_dev->open = xpad_open; - input_dev->close = xpad_close; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - - /* set up buttons */ - for (i = 0; xpad_btn[i] >= 0; i++) - set_bit(xpad_btn[i], input_dev->keybit); - if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) - for (i = 0; xpad_btn_pad[i] >= 0; i++) - set_bit(xpad_btn_pad[i], input_dev->keybit); - - /* set up axes */ - for (i = 0; xpad_abs[i] >= 0; i++) - xpad_set_up_abs(input_dev, xpad_abs[i]); - if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) - for (i = 0; xpad_abs_pad[i] >= 0; i++) - xpad_set_up_abs(input_dev, xpad_abs_pad[i]); - - ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(xpad->irq_in, udev, - usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), - xpad->idata, XPAD_PKT_LEN, xpad_irq_in, - xpad, ep_irq_in->bInterval); - xpad->irq_in->transfer_dma = xpad->idata_dma; - xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - error = input_register_device(xpad->dev); - if (error) - goto fail3; - - usb_set_intfdata(intf, xpad); - return 0; - - fail3: usb_free_urb(xpad->irq_in); - fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - fail1: input_free_device(input_dev); - kfree(xpad); - return error; - -} - -static void xpad_disconnect(struct usb_interface *intf) -{ - struct usb_xpad *xpad = usb_get_intfdata (intf); - - usb_set_intfdata(intf, NULL); - if (xpad) { - usb_kill_urb(xpad->irq_in); - input_unregister_device(xpad->dev); - usb_free_urb(xpad->irq_in); - usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, - xpad->idata, xpad->idata_dma); - kfree(xpad); - } -} - -static struct usb_driver xpad_driver = { - .name = "xpad", - .probe = xpad_probe, - .disconnect = xpad_disconnect, - .id_table = xpad_table, -}; - -static int __init usb_xpad_init(void) -{ - int result = usb_register(&xpad_driver); - if (result == 0) - info(DRIVER_DESC ":" DRIVER_VERSION); - return result; -} - -static void __exit usb_xpad_exit(void) -{ - usb_deregister(&xpad_driver); -} - -module_init(usb_xpad_init); -module_exit(usb_xpad_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -- cgit v1.1 From b5da20f8f7652e7a9648401a1942b7aac3b9ab9d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 7 May 2007 17:12:07 -0400 Subject: Input: move USB mice under drivers/input/mouse This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman --- drivers/input/mouse/Kconfig | 38 ++- drivers/input/mouse/Makefile | 1 + drivers/input/mouse/appletouch.c | 706 +++++++++++++++++++++++++++++++++++++++ drivers/usb/input/Kconfig | 20 -- drivers/usb/input/Makefile | 1 - drivers/usb/input/appletouch.c | 706 --------------------------------------- 6 files changed, 736 insertions(+), 736 deletions(-) create mode 100644 drivers/input/mouse/appletouch.c delete mode 100644 drivers/usb/input/appletouch.c (limited to 'drivers') diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 81dd8c7..2ccc114 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -2,7 +2,7 @@ # Mouse driver configuration # menuconfig INPUT_MOUSE - bool "Mouse" + bool "Mice" default y help Say Y here, and a list of supported mice will be displayed. @@ -19,7 +19,7 @@ config MOUSE_PS2 select SERIO_LIBPS2 select SERIO_I8042 if X86_PC select SERIO_GSCPS2 if GSC - ---help--- + help Say Y here if you have a PS/2 mouse connected to your system. This includes the standard 2 or 3-button PS/2 mouse, as well as PS/2 mice with wheels and extra buttons, Microsoft, Logitech or Genius @@ -41,7 +41,7 @@ config MOUSE_PS2_ALPS bool "ALPS PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an ALPS PS/2 touchpad connected to your system. @@ -51,7 +51,7 @@ config MOUSE_PS2_LOGIPS2PP bool "Logictech PS/2++ mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Logictech PS/2++ mouse connected to your system. @@ -61,7 +61,7 @@ config MOUSE_PS2_SYNAPTICS bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Synaptics PS/2 TouchPad connected to your system. @@ -71,7 +71,7 @@ config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Fujitsu B-series Lifebook PS/2 TouchScreen connected to your system. @@ -81,7 +81,7 @@ config MOUSE_PS2_TRACKPOINT bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an IBM Trackpoint PS/2 mouse connected to your system. @@ -90,7 +90,7 @@ config MOUSE_PS2_TRACKPOINT config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an eGalax TouchKit PS/2 touchscreen connected to your system. @@ -99,7 +99,7 @@ config MOUSE_PS2_TOUCHKIT config MOUSE_SERIAL tristate "Serial mouse" select SERIO - ---help--- + help Say Y here if you have a serial (RS-232, COM port) mouse connected to your system. This includes Sun, MouseSystems, Microsoft, Logitech and all other compatible serial mice. @@ -109,6 +109,26 @@ config MOUSE_SERIAL To compile this driver as a module, choose M here: the module will be called sermouse. +config MOUSE_APPLETOUCH + tristate "Apple USB Touchpad support" + select USB + help + Say Y here if you want to use an Apple USB Touchpad. + + These are the touchpads that can be found on post-February 2005 + Apple Powerbooks (prior models have a Synaptics touchpad connected + to the ADB bus). + + This driver provides a basic mouse driver but can be interfaced + with the synaptics X11 driver to provide acceleration and + scrolling in X11. + + For further information, see + . + + To compile this driver as a module, choose M here: the + module will be called appletouch. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 6a8f622..aa4ba87 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o +obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c new file mode 100644 index 0000000..e321526 --- /dev/null +++ b/drivers/input/mouse/appletouch.c @@ -0,0 +1,706 @@ +/* + * Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver + * + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + * Copyright (C) 2005 Stelian Pop (stelian@popies.net) + * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + * + * Thanks to Alex Harper for his inputs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +/* Apple has powerbooks which have the keyboard with different Product IDs */ +#define APPLE_VENDOR_ID 0x05AC + +/* These names come from Info.plist in AppleUSBTrackpad.kext */ +#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E +#define FOUNTAIN_ISO_PRODUCT_ID 0x020F + +#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A + +#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B + +#define GEYSER_ANSI_PRODUCT_ID 0x0214 +#define GEYSER_ISO_PRODUCT_ID 0x0215 +#define GEYSER_JIS_PRODUCT_ID 0x0216 + +/* MacBook devices */ +#define GEYSER3_ANSI_PRODUCT_ID 0x0217 +#define GEYSER3_ISO_PRODUCT_ID 0x0218 +#define GEYSER3_JIS_PRODUCT_ID 0x0219 + +/* + * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext + * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables + */ +#define GEYSER4_ANSI_PRODUCT_ID 0x021A +#define GEYSER4_ISO_PRODUCT_ID 0x021B +#define GEYSER4_JIS_PRODUCT_ID 0x021C + +#define ATP_DEVICE(prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ + .idVendor = APPLE_VENDOR_ID, \ + .idProduct = (prod), \ + .bInterfaceClass = 0x03, \ + .bInterfaceProtocol = 0x02 + +/* table of devices that work with this driver */ +static struct usb_device_id atp_table [] = { + { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) }, + { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) }, + + /* PowerBooks Oct 2005 */ + { ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) }, + + /* Core Duo MacBook & MacBook Pro */ + { ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) }, + + /* Core2 Duo MacBook & MacBook Pro */ + { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) }, + + /* Terminating entry */ + { } +}; +MODULE_DEVICE_TABLE (usb, atp_table); + +/* + * number of sensors. Note that only 16 instead of 26 X (horizontal) + * sensors exist on 12" and 15" PowerBooks. All models have 16 Y + * (vertical) sensors. + */ +#define ATP_XSENSORS 26 +#define ATP_YSENSORS 16 + +/* amount of fuzz this touchpad generates */ +#define ATP_FUZZ 16 + +/* maximum pressure this driver will report */ +#define ATP_PRESSURE 300 +/* + * multiplication factor for the X and Y coordinates. + * We try to keep the touchpad aspect ratio while still doing only simple + * arithmetics. + * The factors below give coordinates like: + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 + */ +#define ATP_XFACT 64 +#define ATP_YFACT 43 + +/* + * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is + * ignored. + */ +#define ATP_THRESHOLD 5 + +/* MacBook Pro (Geyser 3 & 4) initialization constants */ +#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1 +#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9 +#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300 +#define ATP_GEYSER3_MODE_REQUEST_INDEX 0 +#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04 + +/* Structure to hold all of our device specific stuff */ +struct atp { + char phys[64]; + struct usb_device * udev; /* usb device */ + struct urb * urb; /* usb request block */ + signed char * data; /* transferred data */ + int open; /* non-zero if opened */ + struct input_dev *input; /* input dev */ + int valid; /* are the sensors valid ? */ + int x_old; /* last reported x/y, */ + int y_old; /* used for smoothing */ + /* current value of the sensors */ + signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; + /* last value of the sensors */ + signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; + /* accumulated sensors */ + int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; + int overflowwarn; /* overflow warning printed? */ + int datalen; /* size of an USB urb transfer */ +}; + +#define dbg_dump(msg, tab) \ + if (debug > 1) { \ + int i; \ + printk("appletouch: %s %lld", msg, (long long)jiffies); \ + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ + printk(" %02x", tab[i]); \ + printk("\n"); \ + } + +#define dprintk(format, a...) \ + do { \ + if (debug) printk(format, ##a); \ + } while (0) + +MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann"); +MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver"); +MODULE_LICENSE("GPL"); + +/* + * Make the threshold a module parameter + */ +static int threshold = ATP_THRESHOLD; +module_param(threshold, int, 0644); +MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value"); + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activate debugging output"); + +/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */ +static inline int atp_is_geyser_2(struct atp *dev) +{ + u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct); + + return (productId == GEYSER_ANSI_PRODUCT_ID) || + (productId == GEYSER_ISO_PRODUCT_ID) || + (productId == GEYSER_JIS_PRODUCT_ID); +} + +static inline int atp_is_geyser_3(struct atp *dev) +{ + u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct); + + return (productId == GEYSER3_ANSI_PRODUCT_ID) || + (productId == GEYSER3_ISO_PRODUCT_ID) || + (productId == GEYSER3_JIS_PRODUCT_ID) || + (productId == GEYSER4_ANSI_PRODUCT_ID) || + (productId == GEYSER4_ISO_PRODUCT_ID) || + (productId == GEYSER4_JIS_PRODUCT_ID); +} + +static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, + int *z, int *fingers) +{ + int i; + /* values to calculate mean */ + int pcum = 0, psum = 0; + int is_increasing = 0; + + *fingers = 0; + + for (i = 0; i < nb_sensors; i++) { + if (xy_sensors[i] < threshold) { + if (is_increasing) + is_increasing = 0; + + continue; + } + + /* + * Makes the finger detection more versatile. For example, + * two fingers with no gap will be detected. Also, my + * tests show it less likely to have intermittent loss + * of multiple finger readings while moving around (scrolling). + * + * Changes the multiple finger detection to counting humps on + * sensors (transitions from nonincreasing to increasing) + * instead of counting transitions from low sensors (no + * finger reading) to high sensors (finger above + * sensor) + * + * - Jason Parekh + */ + if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) { + (*fingers)++; + is_increasing = 1; + } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) { + is_increasing = 0; + } + + /* + * Subtracts threshold so a high sensor that just passes the threshold + * won't skew the calculated absolute coordinate. Fixes an issue + * where slowly moving the mouse would occassionaly jump a number of + * pixels (let me restate--slowly moving the mouse makes this issue + * most apparent). + */ + pcum += (xy_sensors[i] - threshold) * i; + psum += (xy_sensors[i] - threshold); + } + + if (psum > 0) { + *z = psum; + return pcum * fact / psum; + } + + return 0; +} + +static inline void atp_report_fingers(struct input_dev *input, int fingers) +{ + input_report_key(input, BTN_TOOL_FINGER, fingers == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2); +} + +static void atp_complete(struct urb* urb) +{ + int x, y, x_z, y_z, x_f, y_f; + int retval, i, j; + struct atp *dev = urb->context; + + switch (urb->status) { + case 0: + /* success */ + break; + case -EOVERFLOW: + if(!dev->overflowwarn) { + printk("appletouch: OVERFLOW with data " + "length %d, actual length is %d\n", + dev->datalen, dev->urb->actual_length); + dev->overflowwarn = 1; + } + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + /* drop incomplete datasets */ + if (dev->urb->actual_length != dev->datalen) { + dprintk("appletouch: incomplete data package" + " (first byte: %d, length: %d).\n", + dev->data[0], dev->urb->actual_length); + goto exit; + } + + /* reorder the sensors values */ + if (atp_is_geyser_3(dev)) { + memset(dev->xy_cur, 0, sizeof(dev->xy_cur)); + + /* + * The values are laid out like this: + * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ... + * '-' is an unused value. + */ + + /* read X values */ + for (i = 0, j = 19; i < 20; i += 2, j += 3) { + dev->xy_cur[i] = dev->data[j + 1]; + dev->xy_cur[i + 1] = dev->data[j + 2]; + } + /* read Y values */ + for (i = 0, j = 1; i < 9; i += 2, j += 3) { + dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1]; + dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2]; + } + } else if (atp_is_geyser_2(dev)) { + memset(dev->xy_cur, 0, sizeof(dev->xy_cur)); + + /* + * The values are laid out like this: + * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ... + * '-' is an unused value. + */ + + /* read X values */ + for (i = 0, j = 19; i < 20; i += 2, j += 3) { + dev->xy_cur[i] = dev->data[j]; + dev->xy_cur[i + 1] = dev->data[j + 1]; + } + + /* read Y values */ + for (i = 0, j = 1; i < 9; i += 2, j += 3) { + dev->xy_cur[ATP_XSENSORS + i] = dev->data[j]; + dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1]; + } + } else { + for (i = 0; i < 8; i++) { + /* X values */ + dev->xy_cur[i ] = dev->data[5 * i + 2]; + dev->xy_cur[i + 8] = dev->data[5 * i + 4]; + dev->xy_cur[i + 16] = dev->data[5 * i + 42]; + if (i < 2) + dev->xy_cur[i + 24] = dev->data[5 * i + 44]; + + /* Y values */ + dev->xy_cur[i + 26] = dev->data[5 * i + 1]; + dev->xy_cur[i + 34] = dev->data[5 * i + 3]; + } + } + + dbg_dump("sample", dev->xy_cur); + + if (!dev->valid) { + /* first sample */ + dev->valid = 1; + dev->x_old = dev->y_old = -1; + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */ + goto exit; + + /* 17" Powerbooks have extra X sensors */ + for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) { + if (!dev->xy_cur[i]) continue; + + printk("appletouch: 17\" model detected.\n"); + if(atp_is_geyser_2(dev)) + input_set_abs_params(dev->input, ABS_X, 0, + (20 - 1) * + ATP_XFACT - 1, + ATP_FUZZ, 0); + else + input_set_abs_params(dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * + ATP_XFACT - 1, + ATP_FUZZ, 0); + + break; + } + + goto exit; + } + + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) { + /* accumulate the change */ + signed char change = dev->xy_old[i] - dev->xy_cur[i]; + dev->xy_acc[i] -= change; + + /* prevent down drifting */ + if (dev->xy_acc[i] < 0) + dev->xy_acc[i] = 0; + } + + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + dbg_dump("accumulator", dev->xy_acc); + + x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + ATP_XFACT, &x_z, &x_f); + y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + ATP_YFACT, &y_z, &y_f); + + if (x && y) { + if (dev->x_old != -1) { + x = (dev->x_old * 3 + x) >> 2; + y = (dev->y_old * 3 + y) >> 2; + dev->x_old = x; + dev->y_old = y; + + if (debug > 1) + printk("appletouch: X: %3d Y: %3d " + "Xz: %3d Yz: %3d\n", + x, y, x_z, y_z); + + input_report_key(dev->input, BTN_TOUCH, 1); + input_report_abs(dev->input, ABS_X, x); + input_report_abs(dev->input, ABS_Y, y); + input_report_abs(dev->input, ABS_PRESSURE, + min(ATP_PRESSURE, x_z + y_z)); + atp_report_fingers(dev->input, max(x_f, y_f)); + } + dev->x_old = x; + dev->y_old = y; + } + else if (!x && !y) { + + dev->x_old = dev->y_old = -1; + input_report_key(dev->input, BTN_TOUCH, 0); + input_report_abs(dev->input, ABS_PRESSURE, 0); + atp_report_fingers(dev->input, 0); + + /* reset the accumulator on release */ + memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); + } + + input_report_key(dev->input, BTN_LEFT, + !!dev->data[dev->datalen - 1]); + + input_sync(dev->input); + +exit: + retval = usb_submit_urb(dev->urb, GFP_ATOMIC); + if (retval) { + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); + } +} + +static int atp_open(struct input_dev *input) +{ + struct atp *dev = input_get_drvdata(input); + + if (usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + dev->open = 1; + return 0; +} + +static void atp_close(struct input_dev *input) +{ + struct atp *dev = input_get_drvdata(input); + + usb_kill_urb(dev->urb); + dev->open = 0; +} + +static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct atp *dev; + struct input_dev *input_dev; + struct usb_device *udev = interface_to_usbdev(iface); + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int int_in_endpointAddr = 0; + int i, error = -ENOMEM; + + /* set up the endpoint information */ + /* use only the first interrupt-in endpoint */ + iface_desc = iface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { + /* we found an interrupt in endpoint */ + int_in_endpointAddr = endpoint->bEndpointAddress; + break; + } + } + if (!int_in_endpointAddr) { + err("Could not find int-in endpoint"); + return -EIO; + } + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(struct atp), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + err("Out of memory"); + goto err_free_devs; + } + + dev->udev = udev; + dev->input = input_dev; + dev->overflowwarn = 0; + if (atp_is_geyser_3(dev)) + dev->datalen = 64; + else if (atp_is_geyser_2(dev)) + dev->datalen = 64; + else + dev->datalen = 81; + + if (atp_is_geyser_3(dev)) { + /* + * By default Geyser 3 device sends standard USB HID mouse + * packets (Report ID 2). This code changes device mode, so it + * sends raw sensor reports (Report ID 5). + */ + char data[8]; + int size; + + size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + ATP_GEYSER3_MODE_READ_REQUEST_ID, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode read request from device" + " (Geyser 3 mode)"); + goto err_free_devs; + } + + /* Apply the mode switch */ + data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; + + size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + ATP_GEYSER3_MODE_WRITE_REQUEST_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ATP_GEYSER3_MODE_REQUEST_VALUE, + ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); + + if (size != 8) { + err("Could not do mode write request to device" + " (Geyser 3 mode)"); + goto err_free_devs; + } + printk("appletouch Geyser 3 inited.\n"); + } + + dev->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->urb) + goto err_free_devs; + + dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL, + &dev->urb->transfer_dma); + if (!dev->data) + goto err_free_urb; + + usb_fill_int_urb(dev->urb, udev, + usb_rcvintpipe(udev, int_in_endpointAddr), + dev->data, dev->datalen, atp_complete, dev, 1); + + usb_make_path(udev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input_dev->name = "appletouch"; + input_dev->phys = dev->phys; + usb_to_input_id(dev->udev, &input_dev->id); + input_dev->dev.parent = &iface->dev; + + input_set_drvdata(input_dev, dev); + + input_dev->open = atp_open; + input_dev->close = atp_close; + + set_bit(EV_ABS, input_dev->evbit); + + if (atp_is_geyser_3(dev)) { + /* + * MacBook have 20 X sensors, 10 Y sensors + */ + input_set_abs_params(input_dev, ABS_X, 0, + ((20 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + ((10 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0); + } else if (atp_is_geyser_2(dev)) { + /* + * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected + * later. + */ + input_set_abs_params(input_dev, ABS_X, 0, + ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0); + } else { + /* + * 12" and 15" Powerbooks only have 16 x sensors, + * 17" models are detected later. + */ + input_set_abs_params(input_dev, ABS_X, 0, + (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); + } + input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + + set_bit(EV_KEY, input_dev->evbit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_TOOL_FINGER, input_dev->keybit); + set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); + + error = input_register_device(dev->input); + if (error) + goto err_free_buffer; + + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); + + return 0; + + err_free_buffer: + usb_buffer_free(dev->udev, dev->datalen, + dev->data, dev->urb->transfer_dma); + err_free_urb: + usb_free_urb(dev->urb); + err_free_devs: + usb_set_intfdata(iface, NULL); + kfree(dev); + input_free_device(input_dev); + return error; +} + +static void atp_disconnect(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + usb_set_intfdata(iface, NULL); + if (dev) { + usb_kill_urb(dev->urb); + input_unregister_device(dev->input); + usb_buffer_free(dev->udev, dev->datalen, + dev->data, dev->urb->transfer_dma); + usb_free_urb(dev->urb); + kfree(dev); + } + printk(KERN_INFO "input: appletouch disconnected\n"); +} + +static int atp_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct atp *dev = usb_get_intfdata(iface); + usb_kill_urb(dev->urb); + dev->valid = 0; + return 0; +} + +static int atp_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + +static struct usb_driver atp_driver = { + .name = "appletouch", + .probe = atp_probe, + .disconnect = atp_disconnect, + .suspend = atp_suspend, + .resume = atp_resume, + .id_table = atp_table, +}; + +static int __init atp_init(void) +{ + return usb_register(&atp_driver); +} + +static void __exit atp_exit(void) +{ + usb_deregister(&atp_driver); +} + +module_init(atp_init); +module_exit(atp_exit); diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 1922878..4959dcf 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -75,23 +75,3 @@ config USB_KEYSPAN_REMOTE To compile this driver as a module, choose M here: the module will be called keyspan_remote. - -config USB_APPLETOUCH - tristate "Apple USB Touchpad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an Apple USB Touchpad. - - These are the touchpads that can be found on post-February 2005 - Apple Powerbooks (prior models have a Synaptics touchpad connected - to the ADB bus). - - This driver provides a basic mouse driver but can be interfaced - with the synaptics X11 driver to provide acceleration and - scrolling in X11. - - For further information, see - . - - To compile this driver as a module, choose M here: the - module will be called appletouch. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index d2cbb0e..91df130 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_USB_POWERMATE) += powermate.o obj-$(CONFIG_USB_YEALINK) += yealink.o -obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o ifeq ($(CONFIG_USB_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c deleted file mode 100644 index e321526..0000000 --- a/drivers/usb/input/appletouch.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - * Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver - * - * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) - * Copyright (C) 2005 Stelian Pop (stelian@popies.net) - * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) - * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) - * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) - * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) - * - * Thanks to Alex Harper for his inputs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -/* Apple has powerbooks which have the keyboard with different Product IDs */ -#define APPLE_VENDOR_ID 0x05AC - -/* These names come from Info.plist in AppleUSBTrackpad.kext */ -#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E -#define FOUNTAIN_ISO_PRODUCT_ID 0x020F - -#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A - -#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B - -#define GEYSER_ANSI_PRODUCT_ID 0x0214 -#define GEYSER_ISO_PRODUCT_ID 0x0215 -#define GEYSER_JIS_PRODUCT_ID 0x0216 - -/* MacBook devices */ -#define GEYSER3_ANSI_PRODUCT_ID 0x0217 -#define GEYSER3_ISO_PRODUCT_ID 0x0218 -#define GEYSER3_JIS_PRODUCT_ID 0x0219 - -/* - * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext - * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables - */ -#define GEYSER4_ANSI_PRODUCT_ID 0x021A -#define GEYSER4_ISO_PRODUCT_ID 0x021B -#define GEYSER4_JIS_PRODUCT_ID 0x021C - -#define ATP_DEVICE(prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS | \ - USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ - .idVendor = APPLE_VENDOR_ID, \ - .idProduct = (prod), \ - .bInterfaceClass = 0x03, \ - .bInterfaceProtocol = 0x02 - -/* table of devices that work with this driver */ -static struct usb_device_id atp_table [] = { - { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) }, - { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) }, - { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) }, - - /* PowerBooks Oct 2005 */ - { ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) }, - - /* Core Duo MacBook & MacBook Pro */ - { ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) }, - - /* Core2 Duo MacBook & MacBook Pro */ - { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) }, - { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) }, - - /* Terminating entry */ - { } -}; -MODULE_DEVICE_TABLE (usb, atp_table); - -/* - * number of sensors. Note that only 16 instead of 26 X (horizontal) - * sensors exist on 12" and 15" PowerBooks. All models have 16 Y - * (vertical) sensors. - */ -#define ATP_XSENSORS 26 -#define ATP_YSENSORS 16 - -/* amount of fuzz this touchpad generates */ -#define ATP_FUZZ 16 - -/* maximum pressure this driver will report */ -#define ATP_PRESSURE 300 -/* - * multiplication factor for the X and Y coordinates. - * We try to keep the touchpad aspect ratio while still doing only simple - * arithmetics. - * The factors below give coordinates like: - * 0 <= x < 960 on 12" and 15" Powerbooks - * 0 <= x < 1600 on 17" Powerbooks - * 0 <= y < 646 - */ -#define ATP_XFACT 64 -#define ATP_YFACT 43 - -/* - * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is - * ignored. - */ -#define ATP_THRESHOLD 5 - -/* MacBook Pro (Geyser 3 & 4) initialization constants */ -#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1 -#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9 -#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300 -#define ATP_GEYSER3_MODE_REQUEST_INDEX 0 -#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04 - -/* Structure to hold all of our device specific stuff */ -struct atp { - char phys[64]; - struct usb_device * udev; /* usb device */ - struct urb * urb; /* usb request block */ - signed char * data; /* transferred data */ - int open; /* non-zero if opened */ - struct input_dev *input; /* input dev */ - int valid; /* are the sensors valid ? */ - int x_old; /* last reported x/y, */ - int y_old; /* used for smoothing */ - /* current value of the sensors */ - signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; - /* last value of the sensors */ - signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; - /* accumulated sensors */ - int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; - int overflowwarn; /* overflow warning printed? */ - int datalen; /* size of an USB urb transfer */ -}; - -#define dbg_dump(msg, tab) \ - if (debug > 1) { \ - int i; \ - printk("appletouch: %s %lld", msg, (long long)jiffies); \ - for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ - printk(" %02x", tab[i]); \ - printk("\n"); \ - } - -#define dprintk(format, a...) \ - do { \ - if (debug) printk(format, ##a); \ - } while (0) - -MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann"); -MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver"); -MODULE_LICENSE("GPL"); - -/* - * Make the threshold a module parameter - */ -static int threshold = ATP_THRESHOLD; -module_param(threshold, int, 0644); -MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value"); - -static int debug = 1; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activate debugging output"); - -/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */ -static inline int atp_is_geyser_2(struct atp *dev) -{ - u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct); - - return (productId == GEYSER_ANSI_PRODUCT_ID) || - (productId == GEYSER_ISO_PRODUCT_ID) || - (productId == GEYSER_JIS_PRODUCT_ID); -} - -static inline int atp_is_geyser_3(struct atp *dev) -{ - u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct); - - return (productId == GEYSER3_ANSI_PRODUCT_ID) || - (productId == GEYSER3_ISO_PRODUCT_ID) || - (productId == GEYSER3_JIS_PRODUCT_ID) || - (productId == GEYSER4_ANSI_PRODUCT_ID) || - (productId == GEYSER4_ISO_PRODUCT_ID) || - (productId == GEYSER4_JIS_PRODUCT_ID); -} - -static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, - int *z, int *fingers) -{ - int i; - /* values to calculate mean */ - int pcum = 0, psum = 0; - int is_increasing = 0; - - *fingers = 0; - - for (i = 0; i < nb_sensors; i++) { - if (xy_sensors[i] < threshold) { - if (is_increasing) - is_increasing = 0; - - continue; - } - - /* - * Makes the finger detection more versatile. For example, - * two fingers with no gap will be detected. Also, my - * tests show it less likely to have intermittent loss - * of multiple finger readings while moving around (scrolling). - * - * Changes the multiple finger detection to counting humps on - * sensors (transitions from nonincreasing to increasing) - * instead of counting transitions from low sensors (no - * finger reading) to high sensors (finger above - * sensor) - * - * - Jason Parekh - */ - if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) { - (*fingers)++; - is_increasing = 1; - } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) { - is_increasing = 0; - } - - /* - * Subtracts threshold so a high sensor that just passes the threshold - * won't skew the calculated absolute coordinate. Fixes an issue - * where slowly moving the mouse would occassionaly jump a number of - * pixels (let me restate--slowly moving the mouse makes this issue - * most apparent). - */ - pcum += (xy_sensors[i] - threshold) * i; - psum += (xy_sensors[i] - threshold); - } - - if (psum > 0) { - *z = psum; - return pcum * fact / psum; - } - - return 0; -} - -static inline void atp_report_fingers(struct input_dev *input, int fingers) -{ - input_report_key(input, BTN_TOOL_FINGER, fingers == 1); - input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2); -} - -static void atp_complete(struct urb* urb) -{ - int x, y, x_z, y_z, x_f, y_f; - int retval, i, j; - struct atp *dev = urb->context; - - switch (urb->status) { - case 0: - /* success */ - break; - case -EOVERFLOW: - if(!dev->overflowwarn) { - printk("appletouch: OVERFLOW with data " - "length %d, actual length is %d\n", - dev->datalen, dev->urb->actual_length); - dev->overflowwarn = 1; - } - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* This urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); - goto exit; - } - - /* drop incomplete datasets */ - if (dev->urb->actual_length != dev->datalen) { - dprintk("appletouch: incomplete data package" - " (first byte: %d, length: %d).\n", - dev->data[0], dev->urb->actual_length); - goto exit; - } - - /* reorder the sensors values */ - if (atp_is_geyser_3(dev)) { - memset(dev->xy_cur, 0, sizeof(dev->xy_cur)); - - /* - * The values are laid out like this: - * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ... - * '-' is an unused value. - */ - - /* read X values */ - for (i = 0, j = 19; i < 20; i += 2, j += 3) { - dev->xy_cur[i] = dev->data[j + 1]; - dev->xy_cur[i + 1] = dev->data[j + 2]; - } - /* read Y values */ - for (i = 0, j = 1; i < 9; i += 2, j += 3) { - dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1]; - dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2]; - } - } else if (atp_is_geyser_2(dev)) { - memset(dev->xy_cur, 0, sizeof(dev->xy_cur)); - - /* - * The values are laid out like this: - * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ... - * '-' is an unused value. - */ - - /* read X values */ - for (i = 0, j = 19; i < 20; i += 2, j += 3) { - dev->xy_cur[i] = dev->data[j]; - dev->xy_cur[i + 1] = dev->data[j + 1]; - } - - /* read Y values */ - for (i = 0, j = 1; i < 9; i += 2, j += 3) { - dev->xy_cur[ATP_XSENSORS + i] = dev->data[j]; - dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1]; - } - } else { - for (i = 0; i < 8; i++) { - /* X values */ - dev->xy_cur[i ] = dev->data[5 * i + 2]; - dev->xy_cur[i + 8] = dev->data[5 * i + 4]; - dev->xy_cur[i + 16] = dev->data[5 * i + 42]; - if (i < 2) - dev->xy_cur[i + 24] = dev->data[5 * i + 44]; - - /* Y values */ - dev->xy_cur[i + 26] = dev->data[5 * i + 1]; - dev->xy_cur[i + 34] = dev->data[5 * i + 3]; - } - } - - dbg_dump("sample", dev->xy_cur); - - if (!dev->valid) { - /* first sample */ - dev->valid = 1; - dev->x_old = dev->y_old = -1; - memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); - - if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */ - goto exit; - - /* 17" Powerbooks have extra X sensors */ - for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) { - if (!dev->xy_cur[i]) continue; - - printk("appletouch: 17\" model detected.\n"); - if(atp_is_geyser_2(dev)) - input_set_abs_params(dev->input, ABS_X, 0, - (20 - 1) * - ATP_XFACT - 1, - ATP_FUZZ, 0); - else - input_set_abs_params(dev->input, ABS_X, 0, - (ATP_XSENSORS - 1) * - ATP_XFACT - 1, - ATP_FUZZ, 0); - - break; - } - - goto exit; - } - - for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) { - /* accumulate the change */ - signed char change = dev->xy_old[i] - dev->xy_cur[i]; - dev->xy_acc[i] -= change; - - /* prevent down drifting */ - if (dev->xy_acc[i] < 0) - dev->xy_acc[i] = 0; - } - - memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); - - dbg_dump("accumulator", dev->xy_acc); - - x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, - ATP_XFACT, &x_z, &x_f); - y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, - ATP_YFACT, &y_z, &y_f); - - if (x && y) { - if (dev->x_old != -1) { - x = (dev->x_old * 3 + x) >> 2; - y = (dev->y_old * 3 + y) >> 2; - dev->x_old = x; - dev->y_old = y; - - if (debug > 1) - printk("appletouch: X: %3d Y: %3d " - "Xz: %3d Yz: %3d\n", - x, y, x_z, y_z); - - input_report_key(dev->input, BTN_TOUCH, 1); - input_report_abs(dev->input, ABS_X, x); - input_report_abs(dev->input, ABS_Y, y); - input_report_abs(dev->input, ABS_PRESSURE, - min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(dev->input, max(x_f, y_f)); - } - dev->x_old = x; - dev->y_old = y; - } - else if (!x && !y) { - - dev->x_old = dev->y_old = -1; - input_report_key(dev->input, BTN_TOUCH, 0); - input_report_abs(dev->input, ABS_PRESSURE, 0); - atp_report_fingers(dev->input, 0); - - /* reset the accumulator on release */ - memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); - } - - input_report_key(dev->input, BTN_LEFT, - !!dev->data[dev->datalen - 1]); - - input_sync(dev->input); - -exit: - retval = usb_submit_urb(dev->urb, GFP_ATOMIC); - if (retval) { - err("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); - } -} - -static int atp_open(struct input_dev *input) -{ - struct atp *dev = input_get_drvdata(input); - - if (usb_submit_urb(dev->urb, GFP_ATOMIC)) - return -EIO; - - dev->open = 1; - return 0; -} - -static void atp_close(struct input_dev *input) -{ - struct atp *dev = input_get_drvdata(input); - - usb_kill_urb(dev->urb); - dev->open = 0; -} - -static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) -{ - struct atp *dev; - struct input_dev *input_dev; - struct usb_device *udev = interface_to_usbdev(iface); - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - int int_in_endpointAddr = 0; - int i, error = -ENOMEM; - - /* set up the endpoint information */ - /* use only the first interrupt-in endpoint */ - iface_desc = iface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { - /* we found an interrupt in endpoint */ - int_in_endpointAddr = endpoint->bEndpointAddress; - break; - } - } - if (!int_in_endpointAddr) { - err("Could not find int-in endpoint"); - return -EIO; - } - - /* allocate memory for our device state and initialize it */ - dev = kzalloc(sizeof(struct atp), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!dev || !input_dev) { - err("Out of memory"); - goto err_free_devs; - } - - dev->udev = udev; - dev->input = input_dev; - dev->overflowwarn = 0; - if (atp_is_geyser_3(dev)) - dev->datalen = 64; - else if (atp_is_geyser_2(dev)) - dev->datalen = 64; - else - dev->datalen = 81; - - if (atp_is_geyser_3(dev)) { - /* - * By default Geyser 3 device sends standard USB HID mouse - * packets (Report ID 2). This code changes device mode, so it - * sends raw sensor reports (Report ID 5). - */ - char data[8]; - int size; - - size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - ATP_GEYSER3_MODE_READ_REQUEST_ID, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - - if (size != 8) { - err("Could not do mode read request from device" - " (Geyser 3 mode)"); - goto err_free_devs; - } - - /* Apply the mode switch */ - data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE; - - size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - ATP_GEYSER3_MODE_WRITE_REQUEST_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ATP_GEYSER3_MODE_REQUEST_VALUE, - ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000); - - if (size != 8) { - err("Could not do mode write request to device" - " (Geyser 3 mode)"); - goto err_free_devs; - } - printk("appletouch Geyser 3 inited.\n"); - } - - dev->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->urb) - goto err_free_devs; - - dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL, - &dev->urb->transfer_dma); - if (!dev->data) - goto err_free_urb; - - usb_fill_int_urb(dev->urb, udev, - usb_rcvintpipe(udev, int_in_endpointAddr), - dev->data, dev->datalen, atp_complete, dev, 1); - - usb_make_path(udev, dev->phys, sizeof(dev->phys)); - strlcat(dev->phys, "/input0", sizeof(dev->phys)); - - input_dev->name = "appletouch"; - input_dev->phys = dev->phys; - usb_to_input_id(dev->udev, &input_dev->id); - input_dev->dev.parent = &iface->dev; - - input_set_drvdata(input_dev, dev); - - input_dev->open = atp_open; - input_dev->close = atp_close; - - set_bit(EV_ABS, input_dev->evbit); - - if (atp_is_geyser_3(dev)) { - /* - * MacBook have 20 X sensors, 10 Y sensors - */ - input_set_abs_params(input_dev, ABS_X, 0, - ((20 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0); - input_set_abs_params(input_dev, ABS_Y, 0, - ((10 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0); - } else if (atp_is_geyser_2(dev)) { - /* - * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected - * later. - */ - input_set_abs_params(input_dev, ABS_X, 0, - ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0); - input_set_abs_params(input_dev, ABS_Y, 0, - ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0); - } else { - /* - * 12" and 15" Powerbooks only have 16 x sensors, - * 17" models are detected later. - */ - input_set_abs_params(input_dev, ABS_X, 0, - (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(input_dev, ABS_Y, 0, - (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); - } - input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); - - set_bit(EV_KEY, input_dev->evbit); - set_bit(BTN_TOUCH, input_dev->keybit); - set_bit(BTN_TOOL_FINGER, input_dev->keybit); - set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); - set_bit(BTN_LEFT, input_dev->keybit); - - error = input_register_device(dev->input); - if (error) - goto err_free_buffer; - - /* save our data pointer in this interface device */ - usb_set_intfdata(iface, dev); - - return 0; - - err_free_buffer: - usb_buffer_free(dev->udev, dev->datalen, - dev->data, dev->urb->transfer_dma); - err_free_urb: - usb_free_urb(dev->urb); - err_free_devs: - usb_set_intfdata(iface, NULL); - kfree(dev); - input_free_device(input_dev); - return error; -} - -static void atp_disconnect(struct usb_interface *iface) -{ - struct atp *dev = usb_get_intfdata(iface); - - usb_set_intfdata(iface, NULL); - if (dev) { - usb_kill_urb(dev->urb); - input_unregister_device(dev->input); - usb_buffer_free(dev->udev, dev->datalen, - dev->data, dev->urb->transfer_dma); - usb_free_urb(dev->urb); - kfree(dev); - } - printk(KERN_INFO "input: appletouch disconnected\n"); -} - -static int atp_suspend(struct usb_interface *iface, pm_message_t message) -{ - struct atp *dev = usb_get_intfdata(iface); - usb_kill_urb(dev->urb); - dev->valid = 0; - return 0; -} - -static int atp_resume(struct usb_interface *iface) -{ - struct atp *dev = usb_get_intfdata(iface); - if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) - return -EIO; - - return 0; -} - -static struct usb_driver atp_driver = { - .name = "appletouch", - .probe = atp_probe, - .disconnect = atp_disconnect, - .suspend = atp_suspend, - .resume = atp_resume, - .id_table = atp_table, -}; - -static int __init atp_init(void) -{ - return usb_register(&atp_driver); -} - -static void __exit atp_exit(void) -{ - usb_deregister(&atp_driver); -} - -module_init(atp_init); -module_exit(atp_exit); -- cgit v1.1 From ba0acb5ee318901646f82c134cca2e4de0c43934 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 7 May 2007 17:31:32 -0400 Subject: Input: move USB miscellaneous devices under drivers/input/misc This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman --- drivers/input/misc/Kconfig | 88 ++- drivers/input/misc/Makefile | 9 +- drivers/input/misc/ati_remote.c | 862 +++++++++++++++++++++++++++++ drivers/input/misc/ati_remote2.c | 543 ++++++++++++++++++ drivers/input/misc/keyspan_remote.c | 592 ++++++++++++++++++++ drivers/input/misc/map_to_7segment.h | 189 +++++++ drivers/input/misc/powermate.c | 463 ++++++++++++++++ drivers/input/misc/yealink.c | 1004 ++++++++++++++++++++++++++++++++++ drivers/input/misc/yealink.h | 220 ++++++++ drivers/usb/Kconfig | 2 - drivers/usb/Makefile | 3 - drivers/usb/input/Kconfig | 77 --- drivers/usb/input/Makefile | 13 - drivers/usb/input/ati_remote.c | 862 ----------------------------- drivers/usb/input/ati_remote2.c | 543 ------------------ drivers/usb/input/keyspan_remote.c | 592 -------------------- drivers/usb/input/map_to_7segment.h | 189 ------- drivers/usb/input/powermate.c | 463 ---------------- drivers/usb/input/yealink.c | 1004 ---------------------------------- drivers/usb/input/yealink.h | 220 -------- 20 files changed, 3961 insertions(+), 3977 deletions(-) create mode 100644 drivers/input/misc/ati_remote.c create mode 100644 drivers/input/misc/ati_remote2.c create mode 100644 drivers/input/misc/keyspan_remote.c create mode 100644 drivers/input/misc/map_to_7segment.h create mode 100644 drivers/input/misc/powermate.c create mode 100644 drivers/input/misc/yealink.c create mode 100644 drivers/input/misc/yealink.h delete mode 100644 drivers/usb/input/Kconfig delete mode 100644 drivers/usb/input/Makefile delete mode 100644 drivers/usb/input/ati_remote.c delete mode 100644 drivers/usb/input/ati_remote2.c delete mode 100644 drivers/usb/input/keyspan_remote.c delete mode 100644 drivers/usb/input/map_to_7segment.h delete mode 100644 drivers/usb/input/powermate.c delete mode 100644 drivers/usb/input/yealink.c delete mode 100644 drivers/usb/input/yealink.h (limited to 'drivers') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1d0d3e7..6013ace 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -40,6 +40,18 @@ config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K +config INPUT_IXP4XX_BEEPER + tristate "IXP4XX Beeper support" + depends on ARCH_IXP4XX + help + If you say yes here, you can connect a beeper to the + ixp4xx gpio pins. This is used by the LinkSys NSLU2. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called ixp4xx-beeper. + config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT @@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS To compile this driver as a module, choose M here: the module will be called atlas_btns. -config INPUT_IXP4XX_BEEPER - tristate "IXP4XX Beeper support" - depends on ARCH_IXP4XX +config INPUT_ATI_REMOTE + tristate "ATI / X10 USB RF remote control" + select USB help - If you say yes here, you can connect a beeper to the - ixp4xx gpio pins. This is used by the LinkSys NSLU2. + Say Y here if you want to use an ATI or X10 "Lola" USB remote control. + These are RF remotes with USB receivers. + The ATI remote comes with many of ATI's All-In-Wonder video cards. + The X10 "Lola" remote is available at: + + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. + +config INPUT_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + select USB + help + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + +config INPUT_KEYSPAN_REMOTE + tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" + depends on EXPERIMENTAL + select USB + help + Say Y here if you want to use a Keyspan DMR USB remote control. + Currently only the UIA-11 type of receiver has been tested. The tag + on the receiver that connects to the USB port should have a P/N that + will tell you what type of DMR you have. The UIA-10 type is not + supported at this time. This driver maps all buttons to keypress + events. - If unsure, say Y. + To compile this driver as a module, choose M here: the module will + be called keyspan_remote. + +config INPUT_POWERMATE + tristate "Griffin PowerMate and Contour Jog support" + select USB + help + Say Y here if you want to use Griffin PowerMate or Contour Jog devices. + These are aluminum dials which can measure clockwise and anticlockwise + rotation. The dial also acts as a pushbutton. The base contains an LED + which can be instructed to pulse or to switch to a particular intensity. + + You can download userspace tools from + . To compile this driver as a module, choose M here: the - module will be called ixp4xx-beeper. + module will be called powermate. + +config INPUT_YEALINK + tristate "Yealink usb-p1k voip phone" + depends EXPERIMENTAL + select USB + help + Say Y here if you want to enable keyboard and LCD functions of the + Yealink usb-p1k usb phones. The audio part is enabled by the generic + usb sound driver, so you might want to enable that as well. + + For information about how to use these additional functions, see + . + + To compile this driver as a module, choose M here: the module will be + called yealink. config INPUT_UINPUT tristate "User level driver support" diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 21e3cca..8b2f779 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o -obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o +obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o +obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_POWERMATE) += powermate.o +obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o -obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o +obj-$(CONFIG_INPUT_UINPUT) += uinput.o diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c new file mode 100644 index 0000000..471aab2 --- /dev/null +++ b/drivers/input/misc/ati_remote.c @@ -0,0 +1,862 @@ +/* + * USB ATI Remote support + * + * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman + * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev + * + * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including + * porting to the 2.6 kernel interfaces, along with other modification + * to better match the style of the existing usb/input drivers. However, the + * protocol and hardware handling is essentially unchanged from 2.1.1. + * + * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by + * Vojtech Pavlik. + * + * Changes: + * + * Feb 2004: Torrey Hoffman + * Version 2.2.0 + * Jun 2004: Torrey Hoffman + * Version 2.2.1 + * Added key repeat support contributed by: + * Vincent Vanackere + * Added support for the "Lola" remote contributed by: + * Seth Cohn + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * + * Hardware & software notes + * + * These remote controls are distributed by ATI as part of their + * "All-In-Wonder" video card packages. The receiver self-identifies as a + * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". + * + * The "Lola" remote is available from X10. See: + * http://www.x10.com/products/lola_sg1.htm + * The Lola is similar to the ATI remote but has no mouse support, and slightly + * different keys. + * + * It is possible to use multiple receivers and remotes on multiple computers + * simultaneously by configuring them to use specific channels. + * + * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. + * Actually, it may even support more, at least in some revisions of the + * hardware. + * + * Each remote can be configured to transmit on one channel as follows: + * - Press and hold the "hand icon" button. + * - When the red LED starts to blink, let go of the "hand icon" button. + * - When it stops blinking, input the channel code as two digits, from 01 + * to 16, and press the hand icon again. + * + * The timing can be a little tricky. Try loading the module with debug=1 + * to have the kernel print out messages about the remote control number + * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. + * + * The driver has a "channel_mask" parameter. This bitmask specifies which + * channels will be ignored by the module. To mask out channels, just add + * all the 2^channel_number values together. + * + * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote + * ignore signals coming from remote controls transmitting on channel 4, but + * accept all other channels. + * + * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be + * ignored. + * + * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this + * parameter are unused. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Module and Version Information, Module Parameters + */ + +#define ATI_REMOTE_VENDOR_ID 0x0bc7 +#define ATI_REMOTE_PRODUCT_ID 0x004 +#define LOLA_REMOTE_PRODUCT_ID 0x002 +#define MEDION_REMOTE_PRODUCT_ID 0x006 + +#define DRIVER_VERSION "2.2.1" +#define DRIVER_AUTHOR "Torrey Hoffman " +#define DRIVER_DESC "ATI/X10 RF USB Remote Control" + +#define NAME_BUFSIZE 80 /* size of product name, path buffers */ +#define DATA_BUFSIZE 63 /* size of URB data buffers */ + +/* + * Duplicate event filtering time. + * Sequential, identical KIND_FILTERED inputs with less than + * FILTER_TIME milliseconds between them are considered as repeat + * events. The hardware generates 5 events for the first keypress + * and we have to take this into account for an accurate repeat + * behaviour. + */ +#define FILTER_TIME 60 /* msec */ +#define REPEAT_DELAY 500 /* msec */ + +static unsigned long channel_mask; +module_param(channel_mask, ulong, 0644); +MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); + +static int repeat_filter = FILTER_TIME; +module_param(repeat_filter, int, 0644); +MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); + +static int repeat_delay = REPEAT_DELAY; +module_param(repeat_delay, int, 0644); +MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); + +#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) +#undef err +#define err(format, arg...) printk(KERN_ERR format , ## arg) + +static struct usb_device_id ati_remote_table[] = { + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ati_remote_table); + +/* Get hi and low bytes of a 16-bits int */ +#define HI(a) ((unsigned char)((a) >> 8)) +#define LO(a) ((unsigned char)((a) & 0xff)) + +#define SEND_FLAG_IN_PROGRESS 1 +#define SEND_FLAG_COMPLETE 2 + +/* Device initialization strings */ +static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; +static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; + +struct ati_remote { + struct input_dev *idev; + struct usb_device *udev; + struct usb_interface *interface; + + struct urb *irq_urb; + struct urb *out_urb; + struct usb_endpoint_descriptor *endpoint_in; + struct usb_endpoint_descriptor *endpoint_out; + unsigned char *inbuf; + unsigned char *outbuf; + dma_addr_t inbuf_dma; + dma_addr_t outbuf_dma; + + unsigned char old_data[2]; /* Detect duplicate events */ + unsigned long old_jiffies; + unsigned long acc_jiffies; /* handle acceleration */ + unsigned long first_jiffies; + + unsigned int repeat_count; + + char name[NAME_BUFSIZE]; + char phys[NAME_BUFSIZE]; + + wait_queue_head_t wait; + int send_flags; +}; + +/* "Kinds" of messages sent from the hardware to the driver. */ +#define KIND_END 0 +#define KIND_LITERAL 1 /* Simply pass to input system */ +#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ +#define KIND_LU 3 /* Directional keypad diagonals - left up, */ +#define KIND_RU 4 /* right up, */ +#define KIND_LD 5 /* left down, */ +#define KIND_RD 6 /* right down */ +#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ + +/* Translation table from hardware messages to input events. */ +static const struct { + short kind; + unsigned char data1, data2; + int type; + unsigned int code; + int value; +} ati_remote_tbl[] = { + /* Directional control pad axes */ + {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ + {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ + {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ + {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ + /* Directional control pad diagonals */ + {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ + {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ + {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ + {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ + + /* "Mouse button" buttons */ + {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ + {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ + {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ + {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ + + /* Artificial "doubleclick" events are generated by the hardware. + * They are mapped to the "side" and "extra" mouse buttons here. */ + {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ + {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ + + /* keyboard. */ + {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1}, + {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1}, + {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1}, + {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1}, + {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1}, + {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1}, + {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1}, + {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1}, + {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1}, + {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1}, + {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1}, + {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1}, + {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1}, + {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1}, + {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1}, + {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1}, + + /* "special" keys */ + {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */ + {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */ + {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */ + {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */ + {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */ + {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */ + {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */ + {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */ + {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */ + {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */ + {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */ + {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */ + {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */ + {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */ + {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */ + {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */ + {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */ + {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */ + {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */ + {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */ + {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */ + {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */ + {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */ + {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */ + {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ + {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */ + {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */ + {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */ + {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */ + {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */ + {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */ + {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ + + {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} +}; + +/* Local function prototypes */ +static void ati_remote_dump (unsigned char *data, unsigned int actual_length); +static int ati_remote_open (struct input_dev *inputdev); +static void ati_remote_close (struct input_dev *inputdev); +static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); +static void ati_remote_irq_out (struct urb *urb); +static void ati_remote_irq_in (struct urb *urb); +static void ati_remote_input_report (struct urb *urb); +static int ati_remote_initialize (struct ati_remote *ati_remote); +static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote_disconnect (struct usb_interface *interface); + +/* usb specific object to register with the usb subsystem */ +static struct usb_driver ati_remote_driver = { + .name = "ati_remote", + .probe = ati_remote_probe, + .disconnect = ati_remote_disconnect, + .id_table = ati_remote_table, +}; + +/* + * ati_remote_dump_input + */ +static void ati_remote_dump(unsigned char *data, unsigned int len) +{ + if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00)) + warn("Weird byte 0x%02x", data[0]); + else if (len == 4) + warn("Weird key %02x %02x %02x %02x", + data[0], data[1], data[2], data[3]); + else + warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...", + len, data[0], data[1], data[2], data[3], data[4], data[5]); +} + +/* + * ati_remote_open + */ +static int ati_remote_open(struct input_dev *inputdev) +{ + struct ati_remote *ati_remote = input_get_drvdata(inputdev); + + /* On first open, submit the read urb which was set up previously. */ + ati_remote->irq_urb->dev = ati_remote->udev; + if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { + dev_err(&ati_remote->interface->dev, + "%s: usb_submit_urb failed!\n", __FUNCTION__); + return -EIO; + } + + return 0; +} + +/* + * ati_remote_close + */ +static void ati_remote_close(struct input_dev *inputdev) +{ + struct ati_remote *ati_remote = input_get_drvdata(inputdev); + + usb_kill_urb(ati_remote->irq_urb); +} + +/* + * ati_remote_irq_out + */ +static void ati_remote_irq_out(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + + if (urb->status) { + dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", + __FUNCTION__, urb->status); + return; + } + + ati_remote->send_flags |= SEND_FLAG_COMPLETE; + wmb(); + wake_up(&ati_remote->wait); +} + +/* + * ati_remote_sendpacket + * + * Used to send device initialization strings + */ +static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data) +{ + int retval = 0; + + /* Set up out_urb */ + memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); + ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); + + ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; + ati_remote->out_urb->dev = ati_remote->udev; + ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; + + retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); + if (retval) { + dev_dbg(&ati_remote->interface->dev, + "sendpacket: usb_submit_urb failed: %d\n", retval); + return retval; + } + + wait_event_timeout(ati_remote->wait, + ((ati_remote->out_urb->status != -EINPROGRESS) || + (ati_remote->send_flags & SEND_FLAG_COMPLETE)), + HZ); + usb_kill_urb(ati_remote->out_urb); + + return retval; +} + +/* + * ati_remote_event_lookup + */ +static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) +{ + int i; + + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { + /* + * Decide if the table entry matches the remote input. + */ + if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) && + ((((ati_remote_tbl[i].data1 >> 4) - + (d1 >> 4) + rem) & 0x0f) == 0x0f) && + (ati_remote_tbl[i].data2 == d2)) + return i; + + } + return -1; +} + +/* + * ati_remote_compute_accel + * + * Implements acceleration curve for directional control pad + * If elapsed time since last event is > 1/4 second, user "stopped", + * so reset acceleration. Otherwise, user is probably holding the control + * pad down, so we increase acceleration, ramping up over two seconds to + * a maximum speed. + */ +static int ati_remote_compute_accel(struct ati_remote *ati_remote) +{ + static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; + unsigned long now = jiffies; + int acc; + + if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { + acc = 1; + ati_remote->acc_jiffies = now; + } + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) + acc = accel[0]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) + acc = accel[1]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) + acc = accel[2]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) + acc = accel[3]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) + acc = accel[4]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) + acc = accel[5]; + else + acc = accel[6]; + + return acc; +} + +/* + * ati_remote_report_input + */ +static void ati_remote_input_report(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + unsigned char *data= ati_remote->inbuf; + struct input_dev *dev = ati_remote->idev; + int index, acc; + int remote_num; + + /* Deal with strange looking inputs */ + if ( (urb->actual_length != 4) || (data[0] != 0x14) || + ((data[3] & 0x0f) != 0x00) ) { + ati_remote_dump(data, urb->actual_length); + return; + } + + /* Mask unwanted remote channels. */ + /* note: remote_num is 0-based, channel 1 on remote == 0 here */ + remote_num = (data[3] >> 4) & 0x0f; + if (channel_mask & (1 << (remote_num + 1))) { + dbginfo(&ati_remote->interface->dev, + "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n", + remote_num, data[1], data[2], channel_mask); + return; + } + + /* Look up event code index in translation table */ + index = ati_remote_event_lookup(remote_num, data[1], data[2]); + if (index < 0) { + dev_warn(&ati_remote->interface->dev, + "Unknown input from channel 0x%02x: data %02x,%02x\n", + remote_num, data[1], data[2]); + return; + } + dbginfo(&ati_remote->interface->dev, + "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n", + remote_num, data[1], data[2], index, ati_remote_tbl[index].code); + + if (ati_remote_tbl[index].kind == KIND_LITERAL) { + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value); + input_sync(dev); + + ati_remote->old_jiffies = jiffies; + return; + } + + if (ati_remote_tbl[index].kind == KIND_FILTERED) { + unsigned long now = jiffies; + + /* Filter duplicate events which happen "too close" together. */ + if (ati_remote->old_data[0] == data[1] && + ati_remote->old_data[1] == data[2] && + time_before(now, ati_remote->old_jiffies + + msecs_to_jiffies(repeat_filter))) { + ati_remote->repeat_count++; + } else { + ati_remote->repeat_count = 0; + ati_remote->first_jiffies = now; + } + + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + ati_remote->old_jiffies = now; + + /* Ensure we skip at least the 4 first duplicate events (generated + * by a single keypress), and continue skipping until repeat_delay + * msecs have passed + */ + if (ati_remote->repeat_count > 0 && + (ati_remote->repeat_count < 5 || + time_before(now, ati_remote->first_jiffies + + msecs_to_jiffies(repeat_delay)))) + return; + + + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, 1); + input_sync(dev); + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, 0); + input_sync(dev); + + } else { + + /* + * Other event kinds are from the directional control pad, and have an + * acceleration factor applied to them. Without this acceleration, the + * control pad is mostly unusable. + */ + acc = ati_remote_compute_accel(ati_remote); + + switch (ati_remote_tbl[index].kind) { + case KIND_ACCEL: + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value * acc); + break; + case KIND_LU: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_RU: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_LD: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, acc); + break; + case KIND_RD: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, acc); + break; + default: + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + ati_remote_tbl[index].kind); + } + input_sync(dev); + + ati_remote->old_jiffies = jiffies; + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + } +} + +/* + * ati_remote_irq_in + */ +static void ati_remote_irq_in(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + int retval; + + switch (urb->status) { + case 0: /* success */ + ati_remote_input_report(urb); + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n", + __FUNCTION__); + return; + default: /* error */ + dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", + __FUNCTION__, urb->status); + } + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n", + __FUNCTION__, retval); +} + +/* + * ati_remote_alloc_buffers + */ +static int ati_remote_alloc_buffers(struct usb_device *udev, + struct ati_remote *ati_remote) +{ + ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC, + &ati_remote->inbuf_dma); + if (!ati_remote->inbuf) + return -1; + + ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC, + &ati_remote->outbuf_dma); + if (!ati_remote->outbuf) + return -1; + + ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->irq_urb) + return -1; + + ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->out_urb) + return -1; + + return 0; +} + +/* + * ati_remote_free_buffers + */ +static void ati_remote_free_buffers(struct ati_remote *ati_remote) +{ + usb_free_urb(ati_remote->irq_urb); + usb_free_urb(ati_remote->out_urb); + + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); + + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->outbuf, ati_remote->outbuf_dma); +} + +static void ati_remote_input_init(struct ati_remote *ati_remote) +{ + struct input_dev *idev = ati_remote->idev; + int i; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) | + BIT(BTN_SIDE) | BIT(BTN_EXTRA) ); + idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) + if (ati_remote_tbl[i].type == EV_KEY) + set_bit(ati_remote_tbl[i].code, idev->keybit); + + input_set_drvdata(idev, ati_remote); + + idev->open = ati_remote_open; + idev->close = ati_remote_close; + + idev->name = ati_remote->name; + idev->phys = ati_remote->phys; + + usb_to_input_id(ati_remote->udev, &idev->id); + idev->dev.parent = &ati_remote->udev->dev; +} + +static int ati_remote_initialize(struct ati_remote *ati_remote) +{ + struct usb_device *udev = ati_remote->udev; + int pipe, maxp; + + init_waitqueue_head(&ati_remote->wait); + + /* Set up irq_urb */ + pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; + + usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, + maxp, ati_remote_irq_in, ati_remote, + ati_remote->endpoint_in->bInterval); + ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; + ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* Set up out_urb */ + pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; + + usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, + maxp, ati_remote_irq_out, ati_remote, + ati_remote->endpoint_out->bInterval); + ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; + ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* send initialization strings */ + if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || + (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { + dev_err(&ati_remote->interface->dev, + "Initializing ati_remote hardware failed.\n"); + return -EIO; + } + + return 0; +} + +/* + * ati_remote_probe + */ +static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; + struct ati_remote *ati_remote; + struct input_dev *input_dev; + int err = -ENOMEM; + + if (iface_host->desc.bNumEndpoints != 2) { + err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__); + return -ENODEV; + } + + endpoint_in = &iface_host->endpoint[0].desc; + endpoint_out = &iface_host->endpoint[1].desc; + + if (!usb_endpoint_is_int_in(endpoint_in)) { + err("%s: Unexpected endpoint_in\n", __FUNCTION__); + return -ENODEV; + } + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { + err("%s: endpoint_in message size==0? \n", __FUNCTION__); + return -ENODEV; + } + + ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ati_remote || !input_dev) + goto fail1; + + /* Allocate URB buffers, URBs */ + if (ati_remote_alloc_buffers(udev, ati_remote)) + goto fail2; + + ati_remote->endpoint_in = endpoint_in; + ati_remote->endpoint_out = endpoint_out; + ati_remote->udev = udev; + ati_remote->idev = input_dev; + ati_remote->interface = interface; + + usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); + strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); + + if (udev->manufacturer) + strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); + + if (udev->product) + snprintf(ati_remote->name, sizeof(ati_remote->name), + "%s %s", ati_remote->name, udev->product); + + if (!strlen(ati_remote->name)) + snprintf(ati_remote->name, sizeof(ati_remote->name), + DRIVER_DESC "(%04x,%04x)", + le16_to_cpu(ati_remote->udev->descriptor.idVendor), + le16_to_cpu(ati_remote->udev->descriptor.idProduct)); + + ati_remote_input_init(ati_remote); + + /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ + err = ati_remote_initialize(ati_remote); + if (err) + goto fail3; + + /* Set up and register input device */ + err = input_register_device(ati_remote->idev); + if (err) + goto fail3; + + usb_set_intfdata(interface, ati_remote); + return 0; + + fail3: usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + fail2: ati_remote_free_buffers(ati_remote); + fail1: input_free_device(input_dev); + kfree(ati_remote); + return err; +} + +/* + * ati_remote_disconnect + */ +static void ati_remote_disconnect(struct usb_interface *interface) +{ + struct ati_remote *ati_remote; + + ati_remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + if (!ati_remote) { + warn("%s - null device?\n", __FUNCTION__); + return; + } + + usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + input_unregister_device(ati_remote->idev); + ati_remote_free_buffers(ati_remote); + kfree(ati_remote); +} + +/* + * ati_remote_init + */ +static int __init ati_remote_init(void) +{ + int result; + + result = usb_register(&ati_remote_driver); + if (result) + err("usb_register error #%d\n", result); + else + info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION); + + return result; +} + +/* + * ati_remote_exit + */ +static void __exit ati_remote_exit(void) +{ + usb_deregister(&ati_remote_driver); +} + +/* + * module specification + */ + +module_init(ati_remote_init); +module_exit(ati_remote_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c new file mode 100644 index 0000000..1031543 --- /dev/null +++ b/drivers/input/misc/ati_remote2.c @@ -0,0 +1,543 @@ +/* + * ati_remote2 - ATI/Philips USB RF remote driver + * + * Copyright (C) 2005 Ville Syrjala + * Copyright (C) 2007 Peter Stokes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include + +#define DRIVER_DESC "ATI/Philips USB RF remote driver" +#define DRIVER_VERSION "0.2" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR("Ville Syrjala "); +MODULE_LICENSE("GPL"); + +/* + * ATI Remote Wonder II Channel Configuration + * + * The remote control can by assigned one of sixteen "channels" in order to facilitate + * the use of multiple remote controls within range of each other. + * A remote's "channel" may be altered by pressing and holding the "PC" button for + * approximately 3 seconds, after which the button will slowly flash the count of the + * currently configured "channel", using the numeric keypad enter a number between 1 and + * 16 and then the "PC" button again, the button will slowly flash the count of the + * newly configured "channel". + */ + +static unsigned int channel_mask = 0xFFFF; +module_param(channel_mask, uint, 0644); +MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); + +static unsigned int mode_mask = 0x1F; +module_param(mode_mask, uint, 0644); +MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); + +static struct usb_device_id ati_remote2_id_table[] = { + { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ + { } +}; +MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); + +static struct { + int hw_code; + int key_code; +} ati_remote2_key_table[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0c, KEY_POWER }, + { 0x0d, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x28, KEY_FORWARD }, + { 0x29, KEY_REWIND }, + { 0x2c, KEY_PLAY }, + { 0x30, KEY_PAUSE }, + { 0x31, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_DVD }, + { 0x39, KEY_TV }, + { 0x54, KEY_MENU }, + { 0x58, KEY_UP }, + { 0x59, KEY_DOWN }, + { 0x5a, KEY_LEFT }, + { 0x5b, KEY_RIGHT }, + { 0x5c, KEY_OK }, + { 0x78, KEY_A }, + { 0x79, KEY_B }, + { 0x7a, KEY_C }, + { 0x7b, KEY_D }, + { 0x7c, KEY_E }, + { 0x7d, KEY_F }, + { 0x82, KEY_ENTER }, + { 0x8e, KEY_VENDOR }, + { 0x96, KEY_COFFEE }, + { 0xa9, BTN_LEFT }, + { 0xaa, BTN_RIGHT }, + { 0xbe, KEY_QUESTION }, + { 0xd5, KEY_FRONT }, + { 0xd0, KEY_EDIT }, + { 0xf9, KEY_INFO }, + { (0x00 << 8) | 0x3f, KEY_PROG1 }, + { (0x01 << 8) | 0x3f, KEY_PROG2 }, + { (0x02 << 8) | 0x3f, KEY_PROG3 }, + { (0x03 << 8) | 0x3f, KEY_PROG4 }, + { (0x04 << 8) | 0x3f, KEY_PC }, + { 0, KEY_RESERVED } +}; + +struct ati_remote2 { + struct input_dev *idev; + struct usb_device *udev; + + struct usb_interface *intf[2]; + struct usb_endpoint_descriptor *ep[2]; + struct urb *urb[2]; + void *buf[2]; + dma_addr_t buf_dma[2]; + + unsigned long jiffies; + int mode; + + char name[64]; + char phys[64]; +}; + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote2_disconnect(struct usb_interface *interface); + +static struct usb_driver ati_remote2_driver = { + .name = "ati_remote2", + .probe = ati_remote2_probe, + .disconnect = ati_remote2_disconnect, + .id_table = ati_remote2_id_table, +}; + +static int ati_remote2_open(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = input_get_drvdata(idev); + int r; + + r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); + if (r) { + usb_kill_urb(ar2->urb[0]); + dev_err(&ar2->intf[1]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + + return 0; +} + +static void ati_remote2_close(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = input_get_drvdata(idev); + + usb_kill_urb(ar2->urb[0]); + usb_kill_urb(ar2->urb[1]); +} + +static void ati_remote2_input_mouse(struct ati_remote2 *ar2) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[0]; + int channel, mode; + + channel = data[0] >> 4; + + if (!((1 << channel) & channel_mask)) + return; + + mode = data[0] & 0x0F; + + if (mode > 4) { + dev_err(&ar2->intf[0]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + if (!((1 << mode) & mode_mask)) + return; + + input_event(idev, EV_REL, REL_X, (s8) data[1]); + input_event(idev, EV_REL, REL_Y, (s8) data[2]); + input_sync(idev); +} + +static int ati_remote2_lookup(unsigned int hw_code) +{ + int i; + + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + if (ati_remote2_key_table[i].hw_code == hw_code) + return i; + + return -1; +} + +static void ati_remote2_input_key(struct ati_remote2 *ar2) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[1]; + int channel, mode, hw_code, index; + + channel = data[0] >> 4; + + if (!((1 << channel) & channel_mask)) + return; + + mode = data[0] & 0x0F; + + if (mode > 4) { + dev_err(&ar2->intf[1]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + hw_code = data[2]; + /* + * Mode keys (AUX1-AUX4, PC) all generate the same code byte. + * Use the mode byte to figure out which one was pressed. + */ + if (hw_code == 0x3f) { + /* + * For some incomprehensible reason the mouse pad generates + * events which look identical to the events from the last + * pressed mode key. Naturally we don't want to generate key + * events for the mouse pad so we filter out any subsequent + * events from the same mode key. + */ + if (ar2->mode == mode) + return; + + if (data[1] == 0) + ar2->mode = mode; + + hw_code |= mode << 8; + } + + if (!((1 << mode) & mode_mask)) + return; + + index = ati_remote2_lookup(hw_code); + if (index < 0) { + dev_err(&ar2->intf[1]->dev, + "Unknown code byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + switch (data[1]) { + case 0: /* release */ + break; + case 1: /* press */ + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); + break; + case 2: /* repeat */ + + /* No repeat for mouse buttons. */ + if (ati_remote2_key_table[index].key_code == BTN_LEFT || + ati_remote2_key_table[index].key_code == BTN_RIGHT) + return; + + if (!time_after_eq(jiffies, ar2->jiffies)) + return; + + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); + break; + default: + dev_err(&ar2->intf[1]->dev, + "Unknown state byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); + input_sync(idev); +} + +static void ati_remote2_complete_mouse(struct urb *urb) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_mouse(ar2); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[0]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static void ati_remote2_complete_key(struct urb *urb) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_key(ar2); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[1]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static int ati_remote2_input_init(struct ati_remote2 *ar2) +{ + struct input_dev *idev; + int i, retval; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + ar2->idev = idev; + input_set_drvdata(idev, ar2); + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); + idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + set_bit(ati_remote2_key_table[i].key_code, idev->keybit); + + idev->rep[REP_DELAY] = 250; + idev->rep[REP_PERIOD] = 33; + + idev->open = ati_remote2_open; + idev->close = ati_remote2_close; + + idev->name = ar2->name; + idev->phys = ar2->phys; + + usb_to_input_id(ar2->udev, &idev->id); + idev->dev.parent = &ar2->udev->dev; + + retval = input_register_device(idev); + if (retval) + input_free_device(idev); + + return retval; +} + +static int ati_remote2_urb_init(struct ati_remote2 *ar2) +{ + struct usb_device *udev = ar2->udev; + int i, pipe, maxp; + + for (i = 0; i < 2; i++) { + ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); + if (!ar2->buf[i]) + return -ENOMEM; + + ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!ar2->urb[i]) + return -ENOMEM; + + pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = maxp > 4 ? 4 : maxp; + + usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, + i ? ati_remote2_complete_key : ati_remote2_complete_mouse, + ar2, ar2->ep[i]->bInterval); + ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; + ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + } + + return 0; +} + +static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) +{ + int i; + + for (i = 0; i < 2; i++) { + usb_free_urb(ar2->urb[i]); + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + } +} + +static int ati_remote2_setup(struct ati_remote2 *ar2) +{ + int r, i, channel; + + /* + * Configure receiver to only accept input from remote "channel" + * channel == 0 -> Accept input from any remote channel + * channel == 1 -> Only accept input from remote channel 1 + * channel == 2 -> Only accept input from remote channel 2 + * ... + * channel == 16 -> Only accept input from remote channel 16 + */ + + channel = 0; + for (i = 0; i < 16; i++) { + if ((1 << i) & channel_mask) { + if (!(~(1 << i) & 0xFFFF & channel_mask)) + channel = i + 1; + break; + } + } + + r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0), + 0x20, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT); + if (r) { + dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n", + __FUNCTION__, r); + return r; + } + + return 0; +} + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *alt = interface->cur_altsetting; + struct ati_remote2 *ar2; + int r; + + if (alt->desc.bInterfaceNumber) + return -ENODEV; + + ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); + if (!ar2) + return -ENOMEM; + + ar2->udev = udev; + + ar2->intf[0] = interface; + ar2->ep[0] = &alt->endpoint[0].desc; + + ar2->intf[1] = usb_ifnum_to_if(udev, 1); + r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); + if (r) + goto fail1; + alt = ar2->intf[1]->cur_altsetting; + ar2->ep[1] = &alt->endpoint[0].desc; + + r = ati_remote2_urb_init(ar2); + if (r) + goto fail2; + + r = ati_remote2_setup(ar2); + if (r) + goto fail2; + + usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); + strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); + + strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); + + r = ati_remote2_input_init(ar2); + if (r) + goto fail2; + + usb_set_intfdata(interface, ar2); + + return 0; + + fail2: + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + fail1: + kfree(ar2); + + return r; +} + +static void ati_remote2_disconnect(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return; + + ar2 = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + input_unregister_device(ar2->idev); + + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + + kfree(ar2); +} + +static int __init ati_remote2_init(void) +{ + int r; + + r = usb_register(&ati_remote2_driver); + if (r) + printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); + else + printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); + + return r; +} + +static void __exit ati_remote2_exit(void) +{ + usb_deregister(&ati_remote2_driver); +} + +module_init(ati_remote2_init); +module_exit(ati_remote2_exit); diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c new file mode 100644 index 0000000..1bffc9f --- /dev/null +++ b/drivers/input/misc/keyspan_remote.c @@ -0,0 +1,592 @@ +/* + * keyspan_remote: USB driver for the Keyspan DMR + * + * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * This driver has been put together with the support of Innosys, Inc. + * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "v0.1" +#define DRIVER_AUTHOR "Michael Downey " +#define DRIVER_DESC "Driver for the USB Keyspan remote control." +#define DRIVER_LICENSE "GPL" + +/* Parameters that can be passed to the driver. */ +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); + +/* Vendor and product ids */ +#define USB_KEYSPAN_VENDOR_ID 0x06CD +#define USB_KEYSPAN_PRODUCT_UIA11 0x0202 + +/* Defines for converting the data from the remote. */ +#define ZERO 0x18 +#define ZERO_MASK 0x1F /* 5 bits for a 0 */ +#define ONE 0x3C +#define ONE_MASK 0x3F /* 6 bits for a 1 */ +#define SYNC 0x3F80 +#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */ +#define STOP 0x00 +#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */ +#define GAP 0xFF + +#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */ + +/* table of devices that work with this driver */ +static struct usb_device_id keyspan_table[] = { + { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, + { } /* Terminating entry */ +}; + +/* Structure to store all the real stuff that a remote sends to us. */ +struct keyspan_message { + u16 system; + u8 button; + u8 toggle; +}; + +/* Structure used for all the bit testing magic needed to be done. */ +struct bit_tester { + u32 tester; + int len; + int pos; + int bits_left; + u8 buffer[32]; +}; + +/* Structure to hold all of our driver specific stuff */ +struct usb_keyspan { + char name[128]; + char phys[64]; + struct usb_device* udev; + struct input_dev *input; + struct usb_interface* interface; + struct usb_endpoint_descriptor* in_endpoint; + struct urb* irq_urb; + int open; + dma_addr_t in_dma; + unsigned char* in_buffer; + + /* variables used to parse messages from remote. */ + struct bit_tester data; + int stage; + int toggle; +}; + +/* + * Table that maps the 31 possible keycodes to input keys. + * Currently there are 15 and 17 button models so RESERVED codes + * are blank areas in the mapping. + */ +static const int keyspan_key_table[] = { + KEY_RESERVED, /* 0 is just a place holder. */ + KEY_RESERVED, + KEY_STOP, + KEY_PLAYCD, + KEY_RESERVED, + KEY_PREVIOUSSONG, + KEY_REWIND, + KEY_FORWARD, + KEY_NEXTSONG, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_PAUSE, + KEY_VOLUMEUP, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_VOLUMEDOWN, + KEY_RESERVED, + KEY_UP, + KEY_RESERVED, + KEY_MUTE, + KEY_LEFT, + KEY_ENTER, + KEY_RIGHT, + KEY_RESERVED, + KEY_RESERVED, + KEY_DOWN, + KEY_RESERVED, + KEY_KPASTERISK, + KEY_RESERVED, + KEY_MENU +}; + +static struct usb_driver keyspan_driver; + +/* + * Debug routine that prints out what we've received from the remote. + */ +static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ +{ + char codes[4 * RECV_SIZE]; + int i; + + for (i = 0; i < RECV_SIZE; i++) + snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); + + dev_info(&dev->udev->dev, "%s\n", codes); +} + +/* + * Routine that manages the bit_tester structure. It makes sure that there are + * at least bits_needed bits loaded into the tester. + */ +static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) +{ + if (dev->data.bits_left >= bits_needed) + return 0; + + /* + * Somehow we've missed the last message. The message will be repeated + * though so it's not too big a deal + */ + if (dev->data.pos >= dev->data.len) { + dev_dbg(&dev->udev->dev, + "%s - Error ran out of data. pos: %d, len: %d\n", + __FUNCTION__, dev->data.pos, dev->data.len); + return -1; + } + + /* Load as much as we can into the tester. */ + while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) && + (dev->data.pos < dev->data.len)) { + dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left); + dev->data.bits_left += 8; + } + + return 0; +} + +/* + * Routine that handles all the logic needed to parse out the message from the remote. + */ +static void keyspan_check_data(struct usb_keyspan *remote) +{ + int i; + int found = 0; + struct keyspan_message message; + + switch(remote->stage) { + case 0: + /* + * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler. + * So the first byte that isn't a FF should be the start of a new message. + */ + for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i); + + if (i < RECV_SIZE) { + memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE); + remote->data.len = RECV_SIZE; + remote->data.pos = 0; + remote->data.tester = 0; + remote->data.bits_left = 0; + remote->stage = 1; + } + break; + + case 1: + /* + * Stage 1 we should have 16 bytes and should be able to detect a + * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + found = 0; + while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) { + for (i = 0; i < 8; ++i) { + if (keyspan_load_tester(remote, 14) != 0) { + remote->stage = 0; + return; + } + + if ((remote->data.tester & SYNC_MASK) == SYNC) { + remote->data.tester = remote->data.tester >> 14; + remote->data.bits_left -= 14; + found = 1; + break; + } else { + remote->data.tester = remote->data.tester >> 1; + --remote->data.bits_left; + } + } + } + + if (!found) { + remote->stage = 0; + remote->data.len = 0; + } else { + remote->stage = 2; + } + break; + + case 2: + /* + * Stage 2 we should have 24 bytes which will be enough for a full + * message. We need to parse out the system code, button code, + * toggle code, and stop. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + message.system = 0; + for (i = 0; i < 9; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.system = message.system << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.system = (message.system << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in system data.\n", __FUNCTION__); + remote->stage = 0; + return; + } + } + + message.button = 0; + for (i = 0; i < 5; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.button = message.button << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.button = (message.button << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in button data.\n", __FUNCTION__); + remote->stage = 0; + return; + } + } + + keyspan_load_tester(remote, 6); + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.toggle = 0; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.toggle = 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Error in message, invalid toggle.\n", __FUNCTION__); + remote->stage = 0; + return; + } + + keyspan_load_tester(remote, 5); + if ((remote->data.tester & STOP_MASK) == STOP) { + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else { + err("Bad message recieved, no stop bit found.\n"); + } + + dev_dbg(&remote->udev->dev, + "%s found valid message: system: %d, button: %d, toggle: %d\n", + __FUNCTION__, message.system, message.button, message.toggle); + + if (message.toggle != remote->toggle) { + input_report_key(remote->input, keyspan_key_table[message.button], 1); + input_report_key(remote->input, keyspan_key_table[message.button], 0); + input_sync(remote->input); + remote->toggle = message.toggle; + } + + remote->stage = 0; + break; + } +} + +/* + * Routine for sending all the initialization messages to the remote. + */ +static int keyspan_setup(struct usb_device* dev) +{ + int retval = 0; + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x44, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x22, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__); + return(retval); +} + +/* + * Routine used to handle a new message that has come in. + */ +static void keyspan_irq_recv(struct urb *urb) +{ + struct usb_keyspan *dev = urb->context; + int retval; + + /* Check our status in case we need to bail out early. */ + switch (urb->status) { + case 0: + break; + + /* Device went away so don't keep trying to read from it. */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + break; + } + + if (debug) + keyspan_print(dev); + + keyspan_check_data(dev); + +resubmit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval); +} + +static int keyspan_open(struct input_dev *dev) +{ + struct usb_keyspan *remote = input_get_drvdata(dev); + + remote->irq_urb->dev = remote->udev; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void keyspan_close(struct input_dev *dev) +{ + struct usb_keyspan *remote = input_get_drvdata(dev); + + usb_kill_urb(remote->irq_urb); +} + +static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; +} + +/* + * Routine that sets up the driver to handle a specific USB device detected on the bus. + */ +static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_endpoint_descriptor *endpoint; + struct usb_keyspan *remote; + struct input_dev *input_dev; + int i, error; + + endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); + if (!endpoint) + return -ENODEV; + + remote = kzalloc(sizeof(*remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!remote || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + remote->udev = udev; + remote->input = input_dev; + remote->interface = interface; + remote->in_endpoint = endpoint; + remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ + + remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + error = -ENOMEM; + goto fail1; + } + + remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!remote->irq_urb) { + error = -ENOMEM; + goto fail2; + } + + error = keyspan_setup(udev); + if (error) { + error = -ENODEV; + goto fail3; + } + + if (udev->manufacturer) + strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(remote->name, " ", sizeof(remote->name)); + strlcat(remote->name, udev->product, sizeof(remote->name)); + } + + if (!strlen(remote->name)) + snprintf(remote->name, sizeof(remote->name), + "USB Keyspan Remote %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, remote->phys, sizeof(remote->phys)); + strlcat(remote->phys, "/input0", sizeof(remote->phys)); + + input_dev->name = remote->name; + input_dev->phys = remote->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &interface->dev; + + input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ + for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) + if (keyspan_key_table[i] != KEY_RESERVED) + set_bit(keyspan_key_table[i], input_dev->keybit); + + input_set_drvdata(input_dev, remote); + + input_dev->open = keyspan_open; + input_dev->close = keyspan_close; + + /* + * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() + */ + usb_fill_int_urb(remote->irq_urb, + remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress), + remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote, + remote->in_endpoint->bInterval); + remote->irq_urb->transfer_dma = remote->in_dma; + remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* we can register the device now, as it is ready */ + error = input_register_device(remote->input); + if (error) + goto fail3; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, remote); + + return 0; + + fail3: usb_free_urb(remote->irq_urb); + fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + fail1: kfree(remote); + input_free_device(input_dev); + + return error; +} + +/* + * Routine called when a device is disconnected from the USB. + */ +static void keyspan_disconnect(struct usb_interface *interface) +{ + struct usb_keyspan *remote; + + remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ + input_unregister_device(remote->input); + usb_kill_urb(remote->irq_urb); + usb_free_urb(remote->irq_urb); + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + kfree(remote); + } +} + +/* + * Standard driver set up sections + */ +static struct usb_driver keyspan_driver = +{ + .name = "keyspan_remote", + .probe = keyspan_probe, + .disconnect = keyspan_disconnect, + .id_table = keyspan_table +}; + +static int __init usb_keyspan_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&keyspan_driver); + if (result) + err("usb_register failed. Error number %d\n", result); + + return result; +} + +static void __exit usb_keyspan_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&keyspan_driver); +} + +module_init(usb_keyspan_init); +module_exit(usb_keyspan_exit); + +MODULE_DEVICE_TABLE(usb, keyspan_table); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); diff --git a/drivers/input/misc/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h new file mode 100644 index 0000000..a424094 --- /dev/null +++ b/drivers/input/misc/map_to_7segment.h @@ -0,0 +1,189 @@ +/* + * drivers/usb/input/map_to_7segment.h + * + * Copyright (c) 2005 Henk Vergonet + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef MAP_TO_7SEGMENT_H +#define MAP_TO_7SEGMENT_H + +/* This file provides translation primitives and tables for the conversion + * of (ASCII) characters to a 7-segments notation. + * + * The 7 segment's wikipedia notation below is used as standard. + * See: http://en.wikipedia.org/wiki/Seven_segment_display + * + * Notation: +-a-+ + * f b + * +-g-+ + * e c + * +-d-+ + * + * Usage: + * + * Register a map variable, and fill it with a character set: + * static SEG7_DEFAULT_MAP(map_seg7); + * + * + * Then use for conversion: + * seg7 = map_to_seg7(&map_seg7, some_char); + * ... + * + * In device drivers it is recommended, if required, to make the char map + * accessible via the sysfs interface using the following scheme: + * + * static ssize_t show_map(struct device *dev, char *buf) { + * memcpy(buf, &map_seg7, sizeof(map_seg7)); + * return sizeof(map_seg7); + * } + * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) { + * if(cnt != sizeof(map_seg7)) + * return -EINVAL; + * memcpy(&map_seg7, buf, cnt); + * return cnt; + * } + * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map); + * + * History: + * 2005-05-31 RFC linux-kernel@vger.kernel.org + */ +#include + + +#define BIT_SEG7_A 0 +#define BIT_SEG7_B 1 +#define BIT_SEG7_C 2 +#define BIT_SEG7_D 3 +#define BIT_SEG7_E 4 +#define BIT_SEG7_F 5 +#define BIT_SEG7_G 6 +#define BIT_SEG7_RESERVED 7 + +struct seg7_conversion_map { + unsigned char table[128]; +}; + +static inline int map_to_seg7(struct seg7_conversion_map *map, int c) +{ + return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL; +} + +#define SEG7_CONVERSION_MAP(_name, _map) \ + struct seg7_conversion_map _name = { .table = { _map } } + +/* + * It is recommended to use a facility that allows user space to redefine + * custom character sets for LCD devices. Please use a sysfs interface + * as described above. + */ +#define MAP_TO_SEG7_SYSFS_FILE "map_seg7" + +/******************************************************************************* + * ASCII conversion table + ******************************************************************************/ + +#define _SEG7(l,a,b,c,d,e,f,g) \ + ( a<',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\ + _SEG7('@',1,1,0,1,1,1,1), + +#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ + _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\ + _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ + _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\ + _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ + _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\ + _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\ + _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\ + _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ + _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), + +#define _MAP_91_96_ASCII_SEG7_SYMBOL \ + _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\ + _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0), + +#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ + _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\ + _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ + _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\ + _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ + _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\ + _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\ + _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\ + _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ + _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), + +#define _MAP_123_126_ASCII_SEG7_SYMBOL \ + _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\ + _SEG7('~',1,0,0,0,0,0,0), + +/* Maps */ + +/* This set tries to map as close as possible to the visible characteristics + * of the ASCII symbol, lowercase and uppercase letters may differ in + * presentation on the display. + */ +#define MAP_ASCII7SEG_ALPHANUM \ + _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ + _MAP_33_47_ASCII_SEG7_SYMBOL \ + _MAP_48_57_ASCII_SEG7_NUMERIC \ + _MAP_58_64_ASCII_SEG7_SYMBOL \ + _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ + _MAP_91_96_ASCII_SEG7_SYMBOL \ + _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ + _MAP_123_126_ASCII_SEG7_SYMBOL + +/* This set tries to map as close as possible to the symbolic characteristics + * of the ASCII character for maximum discrimination. + * For now this means all alpha chars are in lower case representations. + * (This for example facilitates the use of hex numbers with uppercase input.) + */ +#define MAP_ASCII7SEG_ALPHANUM_LC \ + _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ + _MAP_33_47_ASCII_SEG7_SYMBOL \ + _MAP_48_57_ASCII_SEG7_NUMERIC \ + _MAP_58_64_ASCII_SEG7_SYMBOL \ + _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ + _MAP_91_96_ASCII_SEG7_SYMBOL \ + _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ + _MAP_123_126_ASCII_SEG7_SYMBOL + +#define SEG7_DEFAULT_MAP(_name) \ + SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM) + +#endif /* MAP_TO_7SEGMENT_H */ + diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c new file mode 100644 index 0000000..448a470 --- /dev/null +++ b/drivers/input/misc/powermate.c @@ -0,0 +1,463 @@ +/* + * A driver for the Griffin Technology, Inc. "PowerMate" USB controller dial. + * + * v1.1, (c)2002 William R Sowerbutts + * + * This device is a anodised aluminium knob which connects over USB. It can measure + * clockwise and anticlockwise rotation. The dial also acts as a pushbutton with + * a spring for automatic release. The base contains a pair of LEDs which illuminate + * the translucent base. It rotates without limit and reports its relative rotation + * back to the host when polled by the USB controller. + * + * Testing with the knob I have has shown that it measures approximately 94 "clicks" + * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was + * a variable speed cordless electric drill) has shown that the device can measure + * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from + * the host. If it counts more than 7 clicks before it is polled, it will wrap back + * to zero and start counting again. This was at quite high speed, however, almost + * certainly faster than the human hand could turn it. Griffin say that it loses a + * pulse or two on a direction change; the granularity is so fine that I never + * noticed this in practice. + * + * The device's microcontroller can be programmed to set the LED to either a constant + * intensity, or to a rhythmic pulsing. Several patterns and speeds are available. + * + * Griffin were very happy to provide documentation and free hardware for development. + * + * Some userspace tools are available on the web: http://sowerbutts.com/powermate/ + * + */ + +#include +#include +#include +#include +#include +#include + +#define POWERMATE_VENDOR 0x077d /* Griffin Technology, Inc. */ +#define POWERMATE_PRODUCT_NEW 0x0410 /* Griffin PowerMate */ +#define POWERMATE_PRODUCT_OLD 0x04AA /* Griffin soundKnob */ + +#define CONTOUR_VENDOR 0x05f3 /* Contour Design, Inc. */ +#define CONTOUR_JOG 0x0240 /* Jog and Shuttle */ + +/* these are the command codes we send to the device */ +#define SET_STATIC_BRIGHTNESS 0x01 +#define SET_PULSE_ASLEEP 0x02 +#define SET_PULSE_AWAKE 0x03 +#define SET_PULSE_MODE 0x04 + +/* these refer to bits in the powermate_device's requires_update field. */ +#define UPDATE_STATIC_BRIGHTNESS (1<<0) +#define UPDATE_PULSE_ASLEEP (1<<1) +#define UPDATE_PULSE_AWAKE (1<<2) +#define UPDATE_PULSE_MODE (1<<3) + +/* at least two versions of the hardware exist, with differing payload + sizes. the first three bytes always contain the "interesting" data in + the relevant format. */ +#define POWERMATE_PAYLOAD_SIZE_MAX 6 +#define POWERMATE_PAYLOAD_SIZE_MIN 3 +struct powermate_device { + signed char *data; + dma_addr_t data_dma; + struct urb *irq, *config; + struct usb_ctrlrequest *configcr; + dma_addr_t configcr_dma; + struct usb_device *udev; + struct input_dev *input; + spinlock_t lock; + int static_brightness; + int pulse_speed; + int pulse_table; + int pulse_asleep; + int pulse_awake; + int requires_update; // physical settings which are out of sync + char phys[64]; +}; + +static char pm_name_powermate[] = "Griffin PowerMate"; +static char pm_name_soundknob[] = "Griffin SoundKnob"; + +static void powermate_config_complete(struct urb *urb); + +/* Callback for data arriving from the PowerMate over the USB interrupt pipe */ +static void powermate_irq(struct urb *urb) +{ + struct powermate_device *pm = urb->context; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + /* handle updates to device state */ + input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); + input_report_rel(pm->input, REL_DIAL, pm->data[1]); + input_sync(pm->input); + +exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */ +static void powermate_sync_state(struct powermate_device *pm) +{ + if (pm->requires_update == 0) + return; /* no updates are required */ + if (pm->config->status == -EINPROGRESS) + return; /* an update is already in progress; it'll issue this update when it completes */ + + if (pm->requires_update & UPDATE_PULSE_ASLEEP){ + pm->configcr->wValue = cpu_to_le16( SET_PULSE_ASLEEP ); + pm->configcr->wIndex = cpu_to_le16( pm->pulse_asleep ? 1 : 0 ); + pm->requires_update &= ~UPDATE_PULSE_ASLEEP; + }else if (pm->requires_update & UPDATE_PULSE_AWAKE){ + pm->configcr->wValue = cpu_to_le16( SET_PULSE_AWAKE ); + pm->configcr->wIndex = cpu_to_le16( pm->pulse_awake ? 1 : 0 ); + pm->requires_update &= ~UPDATE_PULSE_AWAKE; + }else if (pm->requires_update & UPDATE_PULSE_MODE){ + int op, arg; + /* the powermate takes an operation and an argument for its pulse algorithm. + the operation can be: + 0: divide the speed + 1: pulse at normal speed + 2: multiply the speed + the argument only has an effect for operations 0 and 2, and ranges between + 1 (least effect) to 255 (maximum effect). + + thus, several states are equivalent and are coalesced into one state. + + we map this onto a range from 0 to 510, with: + 0 -- 254 -- use divide (0 = slowest) + 255 -- use normal speed + 256 -- 510 -- use multiple (510 = fastest). + + Only values of 'arg' quite close to 255 are particularly useful/spectacular. + */ + if (pm->pulse_speed < 255) { + op = 0; // divide + arg = 255 - pm->pulse_speed; + } else if (pm->pulse_speed > 255) { + op = 2; // multiply + arg = pm->pulse_speed - 255; + } else { + op = 1; // normal speed + arg = 0; // can be any value + } + pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE ); + pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op ); + pm->requires_update &= ~UPDATE_PULSE_MODE; + } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) { + pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS ); + pm->configcr->wIndex = cpu_to_le16( pm->static_brightness ); + pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS; + } else { + printk(KERN_ERR "powermate: unknown update required"); + pm->requires_update = 0; /* fudge the bug */ + return; + } + +/* printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */ + + pm->configcr->bRequestType = 0x41; /* vendor request */ + pm->configcr->bRequest = 0x01; + pm->configcr->wLength = 0; + + usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0), + (void *) pm->configcr, NULL, 0, + powermate_config_complete, pm); + pm->config->setup_dma = pm->configcr_dma; + pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP; + + if (usb_submit_urb(pm->config, GFP_ATOMIC)) + printk(KERN_ERR "powermate: usb_submit_urb(config) failed"); +} + +/* Called when our asynchronous control message completes. We may need to issue another immediately */ +static void powermate_config_complete(struct urb *urb) +{ + struct powermate_device *pm = urb->context; + unsigned long flags; + + if (urb->status) + printk(KERN_ERR "powermate: config urb returned %d\n", urb->status); + + spin_lock_irqsave(&pm->lock, flags); + powermate_sync_state(pm); + spin_unlock_irqrestore(&pm->lock, flags); +} + +/* Set the LED up as described and begin the sync with the hardware if required */ +static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed, + int pulse_table, int pulse_asleep, int pulse_awake) +{ + unsigned long flags; + + if (pulse_speed < 0) + pulse_speed = 0; + if (pulse_table < 0) + pulse_table = 0; + if (pulse_speed > 510) + pulse_speed = 510; + if (pulse_table > 2) + pulse_table = 2; + + pulse_asleep = !!pulse_asleep; + pulse_awake = !!pulse_awake; + + + spin_lock_irqsave(&pm->lock, flags); + + /* mark state updates which are required */ + if (static_brightness != pm->static_brightness) { + pm->static_brightness = static_brightness; + pm->requires_update |= UPDATE_STATIC_BRIGHTNESS; + } + if (pulse_asleep != pm->pulse_asleep) { + pm->pulse_asleep = pulse_asleep; + pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS); + } + if (pulse_awake != pm->pulse_awake) { + pm->pulse_awake = pulse_awake; + pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS); + } + if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) { + pm->pulse_speed = pulse_speed; + pm->pulse_table = pulse_table; + pm->requires_update |= UPDATE_PULSE_MODE; + } + + powermate_sync_state(pm); + + spin_unlock_irqrestore(&pm->lock, flags); +} + +/* Callback from the Input layer when an event arrives from userspace to configure the LED */ +static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value) +{ + unsigned int command = (unsigned int)_value; + struct powermate_device *pm = input_get_drvdata(dev); + + if (type == EV_MSC && code == MSC_PULSELED){ + /* + bits 0- 7: 8 bits: LED brightness + bits 8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster. + bits 17-18: 2 bits: pulse table (0, 1, 2 valid) + bit 19: 1 bit : pulse whilst asleep? + bit 20: 1 bit : pulse constantly? + */ + int static_brightness = command & 0xFF; // bits 0-7 + int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16 + int pulse_table = (command >> 17) & 0x3; // bits 17-18 + int pulse_asleep = (command >> 19) & 0x1; // bit 19 + int pulse_awake = (command >> 20) & 0x1; // bit 20 + + powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake); + } + + return 0; +} + +static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm) +{ + pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX, + GFP_ATOMIC, &pm->data_dma); + if (!pm->data) + return -1; + + pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)), + GFP_ATOMIC, &pm->configcr_dma); + if (!pm->configcr) + return -1; + + return 0; +} + +static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm) +{ + usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, + pm->data, pm->data_dma); + usb_buffer_free(udev, sizeof(*(pm->configcr)), + pm->configcr, pm->configcr_dma); +} + +/* Called whenever a USB device matching one in our supported devices table is connected */ +static int powermate_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev (intf); + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct powermate_device *pm; + struct input_dev *input_dev; + int pipe, maxp; + int error = -ENOMEM; + + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; + if (!usb_endpoint_is_int_in(endpoint)) + return -EIO; + + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x0a, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, interface->desc.bInterfaceNumber, NULL, 0, + USB_CTRL_SET_TIMEOUT); + + pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) + goto fail1; + + if (powermate_alloc_buffers(udev, pm)) + goto fail2; + + pm->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!pm->irq) + goto fail2; + + pm->config = usb_alloc_urb(0, GFP_KERNEL); + if (!pm->config) + goto fail3; + + pm->udev = udev; + pm->input = input_dev; + + usb_make_path(udev, pm->phys, sizeof(pm->phys)); + strlcpy(pm->phys, "/input0", sizeof(pm->phys)); + + spin_lock_init(&pm->lock); + + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case POWERMATE_PRODUCT_NEW: + input_dev->name = pm_name_powermate; + break; + case POWERMATE_PRODUCT_OLD: + input_dev->name = pm_name_soundknob; + break; + default: + input_dev->name = pm_name_soundknob; + printk(KERN_WARNING "powermate: unknown product id %04x\n", + le16_to_cpu(udev->descriptor.idProduct)); + } + + input_dev->phys = pm->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, pm); + + input_dev->event = powermate_input_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); + input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); + + /* get a handle to the interrupt data pipe */ + pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + + if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) { + printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", + POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp); + maxp = POWERMATE_PAYLOAD_SIZE_MAX; + } + + usb_fill_int_urb(pm->irq, udev, pipe, pm->data, + maxp, powermate_irq, + pm, endpoint->bInterval); + pm->irq->transfer_dma = pm->data_dma; + pm->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* register our interrupt URB with the USB system */ + if (usb_submit_urb(pm->irq, GFP_KERNEL)) { + error = -EIO; + goto fail4; + } + + error = input_register_device(pm->input); + if (error) + goto fail5; + + + /* force an update of everything */ + pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS; + powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters + + usb_set_intfdata(intf, pm); + return 0; + + fail5: usb_kill_urb(pm->irq); + fail4: usb_free_urb(pm->config); + fail3: usb_free_urb(pm->irq); + fail2: powermate_free_buffers(udev, pm); + fail1: input_free_device(input_dev); + kfree(pm); + return error; +} + +/* Called when a USB device we've accepted ownership of is removed */ +static void powermate_disconnect(struct usb_interface *intf) +{ + struct powermate_device *pm = usb_get_intfdata (intf); + + usb_set_intfdata(intf, NULL); + if (pm) { + pm->requires_update = 0; + usb_kill_urb(pm->irq); + input_unregister_device(pm->input); + usb_free_urb(pm->irq); + usb_free_urb(pm->config); + powermate_free_buffers(interface_to_usbdev(intf), pm); + + kfree(pm); + } +} + +static struct usb_device_id powermate_devices [] = { + { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_NEW) }, + { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_OLD) }, + { USB_DEVICE(CONTOUR_VENDOR, CONTOUR_JOG) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, powermate_devices); + +static struct usb_driver powermate_driver = { + .name = "powermate", + .probe = powermate_probe, + .disconnect = powermate_disconnect, + .id_table = powermate_devices, +}; + +static int __init powermate_init(void) +{ + return usb_register(&powermate_driver); +} + +static void __exit powermate_cleanup(void) +{ + usb_deregister(&powermate_driver); +} + +module_init(powermate_init); +module_exit(powermate_cleanup); + +MODULE_AUTHOR( "William R Sowerbutts" ); +MODULE_DESCRIPTION( "Griffin Technology, Inc PowerMate driver" ); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c new file mode 100644 index 0000000..ab15880 --- /dev/null +++ b/drivers/input/misc/yealink.c @@ -0,0 +1,1004 @@ +/* + * drivers/usb/input/yealink.c + * + * Copyright (c) 2005 Henk Vergonet + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * Description: + * Driver for the USB-P1K voip usb phone. + * This device is produced by Yealink Network Technology Co Ltd + * but may be branded under several names: + * - Yealink usb-p1k + * - Tiptel 115 + * - ... + * + * This driver is based on: + * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/ + * - information from http://memeteau.free.fr/usbb2k + * - the xpad-driver drivers/input/joystick/xpad.c + * + * Thanks to: + * - Olivier Vandorpe, for providing the usbb2k-api. + * - Martin Diehl, for spotting my memory allocation bug. + * + * History: + * 20050527 henk First version, functional keyboard. Keyboard events + * will pop-up on the ../input/eventX bus. + * 20050531 henk Added led, LCD, dialtone and sysfs interface. + * 20050610 henk Cleanups, make it ready for public consumption. + * 20050630 henk Cleanups, fixes in response to comments. + * 20050701 henk sysfs write serialisation, fix potential unload races + * 20050801 henk Added ringtone, restructure USB + * 20050816 henk Merge 2.6.13-rc6 + */ + +#include +#include +#include +#include +#include +#include + +#include "map_to_7segment.h" +#include "yealink.h" + +#define DRIVER_VERSION "yld-20051230" +#define DRIVER_AUTHOR "Henk Vergonet" +#define DRIVER_DESC "Yealink phone driver" + +#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */ + +struct yld_status { + u8 lcd[24]; + u8 led; + u8 dialtone; + u8 ringtone; + u8 keynum; +} __attribute__ ((packed)); + +/* + * Register the LCD segment and icon map + */ +#define _LOC(k,l) { .a = (k), .m = (l) } +#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm) \ + { .type = (t), \ + .u = { .s = { _LOC(a, am), _LOC(b, bm), _LOC(c, cm), \ + _LOC(d, dm), _LOC(e, em), _LOC(g, gm), \ + _LOC(f, fm) } } } +#define _PIC(t, h, hm, n) \ + { .type = (t), \ + .u = { .p = { .name = (n), .a = (h), .m = (hm) } } } + +static const struct lcd_segment_map { + char type; + union { + struct pictogram_map { + u8 a,m; + char name[10]; + } p; + struct segment_map { + u8 a,m; + } s[7]; + } u; +} lcdMap[] = { +#include "yealink.h" +}; + +struct yealink_dev { + struct input_dev *idev; /* input device */ + struct usb_device *udev; /* usb device */ + + /* irq input channel */ + struct yld_ctl_packet *irq_data; + dma_addr_t irq_dma; + struct urb *urb_irq; + + /* control output channel */ + struct yld_ctl_packet *ctl_data; + dma_addr_t ctl_dma; + struct usb_ctrlrequest *ctl_req; + dma_addr_t ctl_req_dma; + struct urb *urb_ctl; + + char phys[64]; /* physical device path */ + + u8 lcdMap[ARRAY_SIZE(lcdMap)]; /* state of LCD, LED ... */ + int key_code; /* last reported key */ + + int stat_ix; + union { + struct yld_status s; + u8 b[sizeof(struct yld_status)]; + } master, copy; +}; + + +/******************************************************************************* + * Yealink lcd interface + ******************************************************************************/ + +/* + * Register a default 7 segment character set + */ +static SEG7_DEFAULT_MAP(map_seg7); + + /* Display a char, + * char '\9' and '\n' are placeholders and do not overwrite the original text. + * A space will always hide an icon. + */ +static int setChar(struct yealink_dev *yld, int el, int chr) +{ + int i, a, m, val; + + if (el >= ARRAY_SIZE(lcdMap)) + return -EINVAL; + + if (chr == '\t' || chr == '\n') + return 0; + + yld->lcdMap[el] = chr; + + if (lcdMap[el].type == '.') { + a = lcdMap[el].u.p.a; + m = lcdMap[el].u.p.m; + if (chr != ' ') + yld->master.b[a] |= m; + else + yld->master.b[a] &= ~m; + return 0; + } + + val = map_to_seg7(&map_seg7, chr); + for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) { + m = lcdMap[el].u.s[i].m; + + if (m == 0) + continue; + + a = lcdMap[el].u.s[i].a; + if (val & 1) + yld->master.b[a] |= m; + else + yld->master.b[a] &= ~m; + val = val >> 1; + } + return 0; +}; + +/******************************************************************************* + * Yealink key interface + ******************************************************************************/ + +/* Map device buttons to internal key events. + * + * USB-P1K button layout: + * + * up + * IN OUT + * down + * + * pickup C hangup + * 1 2 3 + * 4 5 6 + * 7 8 9 + * * 0 # + * + * The "up" and "down" keys, are symbolised by arrows on the button. + * The "pickup" and "hangup" keys are symbolised by a green and red phone + * on the button. + */ +static int map_p1k_to_key(int scancode) +{ + switch(scancode) { /* phone key: */ + case 0x23: return KEY_LEFT; /* IN */ + case 0x33: return KEY_UP; /* up */ + case 0x04: return KEY_RIGHT; /* OUT */ + case 0x24: return KEY_DOWN; /* down */ + case 0x03: return KEY_ENTER; /* pickup */ + case 0x14: return KEY_BACKSPACE; /* C */ + case 0x13: return KEY_ESC; /* hangup */ + case 0x00: return KEY_1; /* 1 */ + case 0x01: return KEY_2; /* 2 */ + case 0x02: return KEY_3; /* 3 */ + case 0x10: return KEY_4; /* 4 */ + case 0x11: return KEY_5; /* 5 */ + case 0x12: return KEY_6; /* 6 */ + case 0x20: return KEY_7; /* 7 */ + case 0x21: return KEY_8; /* 8 */ + case 0x22: return KEY_9; /* 9 */ + case 0x30: return KEY_KPASTERISK; /* * */ + case 0x31: return KEY_0; /* 0 */ + case 0x32: return KEY_LEFTSHIFT | + KEY_3 << 8; /* # */ + } + return -EINVAL; +} + +/* Completes a request by converting the data into events for the + * input subsystem. + * + * The key parameter can be cascaded: key2 << 8 | key1 + */ +static void report_key(struct yealink_dev *yld, int key) +{ + struct input_dev *idev = yld->idev; + + if (yld->key_code >= 0) { + /* old key up */ + input_report_key(idev, yld->key_code & 0xff, 0); + if (yld->key_code >> 8) + input_report_key(idev, yld->key_code >> 8, 0); + } + + yld->key_code = key; + if (key >= 0) { + /* new valid key */ + input_report_key(idev, key & 0xff, 1); + if (key >> 8) + input_report_key(idev, key >> 8, 1); + } + input_sync(idev); +} + +/******************************************************************************* + * Yealink usb communication interface + ******************************************************************************/ + +static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p) +{ + u8 *buf = (u8 *)p; + int i; + u8 sum = 0; + + for(i=0; isum = sum; + return usb_control_msg(yld->udev, + usb_sndctrlpipe(yld->udev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0x200, 3, + p, sizeof(*p), + USB_CTRL_SET_TIMEOUT); +} + +static u8 default_ringtone[] = { + 0xEF, /* volume [0-255] */ + 0xFB, 0x1E, 0x00, 0x0C, /* 1250 [hz], 12/100 [s] */ + 0xFC, 0x18, 0x00, 0x0C, /* 1000 [hz], 12/100 [s] */ + 0xFB, 0x1E, 0x00, 0x0C, + 0xFC, 0x18, 0x00, 0x0C, + 0xFB, 0x1E, 0x00, 0x0C, + 0xFC, 0x18, 0x00, 0x0C, + 0xFB, 0x1E, 0x00, 0x0C, + 0xFC, 0x18, 0x00, 0x0C, + 0xFF, 0xFF, 0x01, 0x90, /* silent, 400/100 [s] */ + 0x00, 0x00 /* end of sequence */ +}; + +static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size) +{ + struct yld_ctl_packet *p = yld->ctl_data; + int ix, len; + + if (size <= 0) + return -EINVAL; + + /* Set the ringtone volume */ + memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); + yld->ctl_data->cmd = CMD_RING_VOLUME; + yld->ctl_data->size = 1; + yld->ctl_data->data[0] = buf[0]; + yealink_cmd(yld, p); + + buf++; + size--; + + p->cmd = CMD_RING_NOTE; + ix = 0; + while (size != ix) { + len = size - ix; + if (len > sizeof(p->data)) + len = sizeof(p->data); + p->size = len; + p->offset = cpu_to_be16(ix); + memcpy(p->data, &buf[ix], len); + yealink_cmd(yld, p); + ix += len; + } + return 0; +} + +/* keep stat_master & stat_copy in sync. + */ +static int yealink_do_idle_tasks(struct yealink_dev *yld) +{ + u8 val; + int i, ix, len; + + ix = yld->stat_ix; + + memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); + yld->ctl_data->cmd = CMD_KEYPRESS; + yld->ctl_data->size = 1; + yld->ctl_data->sum = 0xff - CMD_KEYPRESS; + + /* If state update pointer wraps do a KEYPRESS first. */ + if (ix >= sizeof(yld->master)) { + yld->stat_ix = 0; + return 0; + } + + /* find update candidates: copy != master */ + do { + val = yld->master.b[ix]; + if (val != yld->copy.b[ix]) + goto send_update; + } while (++ix < sizeof(yld->master)); + + /* nothing todo, wait a bit and poll for a KEYPRESS */ + yld->stat_ix = 0; + /* TODO how can we wait abit. ?? + * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY); + */ + return 0; + +send_update: + + /* Setup an appropriate update request */ + yld->copy.b[ix] = val; + yld->ctl_data->data[0] = val; + + switch(ix) { + case offsetof(struct yld_status, led): + yld->ctl_data->cmd = CMD_LED; + yld->ctl_data->sum = -1 - CMD_LED - val; + break; + case offsetof(struct yld_status, dialtone): + yld->ctl_data->cmd = CMD_DIALTONE; + yld->ctl_data->sum = -1 - CMD_DIALTONE - val; + break; + case offsetof(struct yld_status, ringtone): + yld->ctl_data->cmd = CMD_RINGTONE; + yld->ctl_data->sum = -1 - CMD_RINGTONE - val; + break; + case offsetof(struct yld_status, keynum): + val--; + val &= 0x1f; + yld->ctl_data->cmd = CMD_SCANCODE; + yld->ctl_data->offset = cpu_to_be16(val); + yld->ctl_data->data[0] = 0; + yld->ctl_data->sum = -1 - CMD_SCANCODE - val; + break; + default: + len = sizeof(yld->master.s.lcd) - ix; + if (len > sizeof(yld->ctl_data->data)) + len = sizeof(yld->ctl_data->data); + + /* Combine up to consecutive LCD bytes in a singe request + */ + yld->ctl_data->cmd = CMD_LCD; + yld->ctl_data->offset = cpu_to_be16(ix); + yld->ctl_data->size = len; + yld->ctl_data->sum = -CMD_LCD - ix - val - len; + for(i=1; imaster.b[ix]; + yld->copy.b[ix] = val; + yld->ctl_data->data[i] = val; + yld->ctl_data->sum -= val; + } + } + yld->stat_ix = ix + 1; + return 1; +} + +/* Decide on how to handle responses + * + * The state transition diagram is somethhing like: + * + * syncState<--+ + * | | + * | idle + * \|/ | + * init --ok--> waitForKey --ok--> getKey + * ^ ^ | + * | +-------ok-------+ + * error,start + * + */ +static void urb_irq_callback(struct urb *urb) +{ + struct yealink_dev *yld = urb->context; + int ret; + + if (urb->status) + err("%s - urb status %d", __FUNCTION__, urb->status); + + switch (yld->irq_data->cmd) { + case CMD_KEYPRESS: + + yld->master.s.keynum = yld->irq_data->data[0]; + break; + + case CMD_SCANCODE: + dbg("get scancode %x", yld->irq_data->data[0]); + + report_key(yld, map_p1k_to_key(yld->irq_data->data[0])); + break; + + default: + err("unexpected response %x", yld->irq_data->cmd); + } + + yealink_do_idle_tasks(yld); + + ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); + if (ret) + err("%s - usb_submit_urb failed %d", __FUNCTION__, ret); +} + +static void urb_ctl_callback(struct urb *urb) +{ + struct yealink_dev *yld = urb->context; + int ret; + + if (urb->status) + err("%s - urb status %d", __FUNCTION__, urb->status); + + switch (yld->ctl_data->cmd) { + case CMD_KEYPRESS: + case CMD_SCANCODE: + /* ask for a response */ + ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC); + break; + default: + /* send new command */ + yealink_do_idle_tasks(yld); + ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); + } + + if (ret) + err("%s - usb_submit_urb failed %d", __FUNCTION__, ret); +} + +/******************************************************************************* + * input event interface + ******************************************************************************/ + +/* TODO should we issue a ringtone on a SND_BELL event? +static int input_ev(struct input_dev *dev, unsigned int type, + unsigned int code, int value) +{ + + if (type != EV_SND) + return -EINVAL; + + switch (code) { + case SND_BELL: + case SND_TONE: + break; + default: + return -EINVAL; + } + + return 0; +} +*/ + +static int input_open(struct input_dev *dev) +{ + struct yealink_dev *yld = input_get_drvdata(dev); + int i, ret; + + dbg("%s", __FUNCTION__); + + /* force updates to device */ + for (i = 0; imaster); i++) + yld->copy.b[i] = ~yld->master.b[i]; + yld->key_code = -1; /* no keys pressed */ + + yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone)); + + /* issue INIT */ + memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); + yld->ctl_data->cmd = CMD_INIT; + yld->ctl_data->size = 10; + yld->ctl_data->sum = 0x100-CMD_INIT-10; + if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) { + dbg("%s - usb_submit_urb failed with result %d", + __FUNCTION__, ret); + return ret; + } + return 0; +} + +static void input_close(struct input_dev *dev) +{ + struct yealink_dev *yld = input_get_drvdata(dev); + + usb_kill_urb(yld->urb_ctl); + usb_kill_urb(yld->urb_irq); +} + +/******************************************************************************* + * sysfs interface + ******************************************************************************/ + +static DECLARE_RWSEM(sysfs_rwsema); + +/* Interface to the 7-segments translation table aka. char set. + */ +static ssize_t show_map(struct device *dev, struct device_attribute *attr, + char *buf) +{ + memcpy(buf, &map_seg7, sizeof(map_seg7)); + return sizeof(map_seg7); +} + +static ssize_t store_map(struct device *dev, struct device_attribute *attr, + const char *buf, size_t cnt) +{ + if (cnt != sizeof(map_seg7)) + return -EINVAL; + memcpy(&map_seg7, buf, sizeof(map_seg7)); + return sizeof(map_seg7); +} + +/* Interface to the LCD. + */ + +/* Reading /sys/../lineX will return the format string with its settings: + * + * Example: + * cat ./line3 + * 888888888888 + * Linux Rocks! + */ +static ssize_t show_line(struct device *dev, char *buf, int a, int b) +{ + struct yealink_dev *yld; + int i; + + down_read(&sysfs_rwsema); + yld = dev_get_drvdata(dev); + if (yld == NULL) { + up_read(&sysfs_rwsema); + return -ENODEV; + } + + for (i = a; i < b; i++) + *buf++ = lcdMap[i].type; + *buf++ = '\n'; + for (i = a; i < b; i++) + *buf++ = yld->lcdMap[i]; + *buf++ = '\n'; + *buf = 0; + + up_read(&sysfs_rwsema); + return 3 + ((b - a) << 1); +} + +static ssize_t show_line1(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET); +} + +static ssize_t show_line2(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET); +} + +static ssize_t show_line3(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET); +} + +/* Writing to /sys/../lineX will set the coresponding LCD line. + * - Excess characters are ignored. + * - If less characters are written than allowed, the remaining digits are + * unchanged. + * - The '\n' or '\t' char is a placeholder, it does not overwrite the + * original content. + */ +static ssize_t store_line(struct device *dev, const char *buf, size_t count, + int el, size_t len) +{ + struct yealink_dev *yld; + int i; + + down_write(&sysfs_rwsema); + yld = dev_get_drvdata(dev); + if (yld == NULL) { + up_write(&sysfs_rwsema); + return -ENODEV; + } + + if (len > count) + len = count; + for (i = 0; i < len; i++) + setChar(yld, el++, buf[i]); + + up_write(&sysfs_rwsema); + return count; +} + +static ssize_t store_line1(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE); +} + +static ssize_t store_line2(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE); +} + +static ssize_t store_line3(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE); +} + +/* Interface to visible and audible "icons", these include: + * pictures on the LCD, the LED, and the dialtone signal. + */ + +/* Get a list of "switchable elements" with their current state. */ +static ssize_t get_icons(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct yealink_dev *yld; + int i, ret = 1; + + down_read(&sysfs_rwsema); + yld = dev_get_drvdata(dev); + if (yld == NULL) { + up_read(&sysfs_rwsema); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(lcdMap); i++) { + if (lcdMap[i].type != '.') + continue; + ret += sprintf(&buf[ret], "%s %s\n", + yld->lcdMap[i] == ' ' ? " " : "on", + lcdMap[i].u.p.name); + } + up_read(&sysfs_rwsema); + return ret; +} + +/* Change the visibility of a particular element. */ +static ssize_t set_icon(struct device *dev, const char *buf, size_t count, + int chr) +{ + struct yealink_dev *yld; + int i; + + down_write(&sysfs_rwsema); + yld = dev_get_drvdata(dev); + if (yld == NULL) { + up_write(&sysfs_rwsema); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(lcdMap); i++) { + if (lcdMap[i].type != '.') + continue; + if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) { + setChar(yld, i, chr); + break; + } + } + + up_write(&sysfs_rwsema); + return count; +} + +static ssize_t show_icon(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return set_icon(dev, buf, count, buf[0]); +} + +static ssize_t hide_icon(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return set_icon(dev, buf, count, ' '); +} + +/* Upload a ringtone to the device. + */ + +/* Stores raw ringtone data in the phone */ +static ssize_t store_ringtone(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct yealink_dev *yld; + + down_write(&sysfs_rwsema); + yld = dev_get_drvdata(dev); + if (yld == NULL) { + up_write(&sysfs_rwsema); + return -ENODEV; + } + + /* TODO locking with async usb control interface??? */ + yealink_set_ringtone(yld, (char *)buf, count); + up_write(&sysfs_rwsema); + return count; +} + +#define _M444 S_IRUGO +#define _M664 S_IRUGO|S_IWUSR|S_IWGRP +#define _M220 S_IWUSR|S_IWGRP + +static DEVICE_ATTR(map_seg7 , _M664, show_map , store_map ); +static DEVICE_ATTR(line1 , _M664, show_line1 , store_line1 ); +static DEVICE_ATTR(line2 , _M664, show_line2 , store_line2 ); +static DEVICE_ATTR(line3 , _M664, show_line3 , store_line3 ); +static DEVICE_ATTR(get_icons , _M444, get_icons , NULL ); +static DEVICE_ATTR(show_icon , _M220, NULL , show_icon ); +static DEVICE_ATTR(hide_icon , _M220, NULL , hide_icon ); +static DEVICE_ATTR(ringtone , _M220, NULL , store_ringtone); + +static struct attribute *yld_attributes[] = { + &dev_attr_line1.attr, + &dev_attr_line2.attr, + &dev_attr_line3.attr, + &dev_attr_get_icons.attr, + &dev_attr_show_icon.attr, + &dev_attr_hide_icon.attr, + &dev_attr_map_seg7.attr, + &dev_attr_ringtone.attr, + NULL +}; + +static struct attribute_group yld_attr_group = { + .attrs = yld_attributes +}; + +/******************************************************************************* + * Linux interface and usb initialisation + ******************************************************************************/ + +struct driver_info { + char *name; +}; + +static const struct driver_info info_P1K = { + .name = "Yealink usb-p1k", +}; + +static const struct usb_device_id usb_table [] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x6993, + .idProduct = 0xb001, + .bInterfaceClass = USB_CLASS_HID, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .driver_info = (kernel_ulong_t)&info_P1K + }, + { } +}; + +static int usb_cleanup(struct yealink_dev *yld, int err) +{ + if (yld == NULL) + return err; + + usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */ + usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */ + + if (yld->idev) { + if (err) + input_free_device(yld->idev); + else + input_unregister_device(yld->idev); + } + + usb_free_urb(yld->urb_irq); + usb_free_urb(yld->urb_ctl); + + usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), + yld->ctl_req, yld->ctl_req_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->ctl_data, yld->ctl_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->irq_data, yld->irq_dma); + + kfree(yld); + return err; +} + +static void usb_disconnect(struct usb_interface *intf) +{ + struct yealink_dev *yld; + + down_write(&sysfs_rwsema); + yld = usb_get_intfdata(intf); + sysfs_remove_group(&intf->dev.kobj, &yld_attr_group); + usb_set_intfdata(intf, NULL); + up_write(&sysfs_rwsema); + + usb_cleanup(yld, 0); +} + +static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev (intf); + struct driver_info *nfo = (struct driver_info *)id->driver_info; + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct yealink_dev *yld; + struct input_dev *input_dev; + int ret, pipe, i; + + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; + + yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); + if (!yld) + return -ENOMEM; + + yld->udev = udev; + + yld->idev = input_dev = input_allocate_device(); + if (!input_dev) + return usb_cleanup(yld, -ENOMEM); + + /* allocate usb buffers */ + yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, + GFP_ATOMIC, &yld->irq_dma); + if (yld->irq_data == NULL) + return usb_cleanup(yld, -ENOMEM); + + yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN, + GFP_ATOMIC, &yld->ctl_dma); + if (!yld->ctl_data) + return usb_cleanup(yld, -ENOMEM); + + yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)), + GFP_ATOMIC, &yld->ctl_req_dma); + if (yld->ctl_req == NULL) + return usb_cleanup(yld, -ENOMEM); + + /* allocate urb structures */ + yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL); + if (yld->urb_irq == NULL) + return usb_cleanup(yld, -ENOMEM); + + yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); + if (yld->urb_ctl == NULL) + return usb_cleanup(yld, -ENOMEM); + + /* get a handle to the interrupt data pipe */ + pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); + ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + if (ret != USB_PKT_LEN) + err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN); + + /* initialise irq urb */ + usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data, + USB_PKT_LEN, + urb_irq_callback, + yld, endpoint->bInterval); + yld->urb_irq->transfer_dma = yld->irq_dma; + yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + yld->urb_irq->dev = udev; + + /* initialise ctl urb */ + yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_OUT; + yld->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; + yld->ctl_req->wValue = cpu_to_le16(0x200); + yld->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); + yld->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); + + usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0), + (void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN, + urb_ctl_callback, yld); + yld->urb_ctl->setup_dma = yld->ctl_req_dma; + yld->urb_ctl->transfer_dma = yld->ctl_dma; + yld->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP | + URB_NO_TRANSFER_DMA_MAP; + yld->urb_ctl->dev = udev; + + /* find out the physical bus location */ + usb_make_path(udev, yld->phys, sizeof(yld->phys)); + strlcat(yld->phys, "/input0", sizeof(yld->phys)); + + /* register settings for the input device */ + input_dev->name = nfo->name; + input_dev->phys = yld->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, yld); + + input_dev->open = input_open; + input_dev->close = input_close; + /* input_dev->event = input_ev; TODO */ + + /* register available key events */ + input_dev->evbit[0] = BIT(EV_KEY); + for (i = 0; i < 256; i++) { + int k = map_p1k_to_key(i); + if (k >= 0) { + set_bit(k & 0xff, input_dev->keybit); + if (k >> 8) + set_bit(k >> 8, input_dev->keybit); + } + } + + ret = input_register_device(yld->idev); + if (ret) + return usb_cleanup(yld, ret); + + usb_set_intfdata(intf, yld); + + /* clear visible elements */ + for (i = 0; i < ARRAY_SIZE(lcdMap); i++) + setChar(yld, i, ' '); + + /* display driver version on LCD line 3 */ + store_line3(&intf->dev, NULL, + DRIVER_VERSION, sizeof(DRIVER_VERSION)); + + /* Register sysfs hooks (don't care about failure) */ + ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group); + return 0; +} + +static struct usb_driver yealink_driver = { + .name = "yealink", + .probe = usb_probe, + .disconnect = usb_disconnect, + .id_table = usb_table, +}; + +static int __init yealink_dev_init(void) +{ + int ret = usb_register(&yealink_driver); + if (ret == 0) + info(DRIVER_DESC ":" DRIVER_VERSION); + return ret; +} + +static void __exit yealink_dev_exit(void) +{ + usb_deregister(&yealink_driver); +} + +module_init(yealink_dev_init); +module_exit(yealink_dev_exit); + +MODULE_DEVICE_TABLE (usb, usb_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h new file mode 100644 index 0000000..48af0be --- /dev/null +++ b/drivers/input/misc/yealink.h @@ -0,0 +1,220 @@ +/* + * drivers/usb/input/yealink.h + * + * Copyright (c) 2005 Henk Vergonet + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef INPUT_YEALINK_H +#define INPUT_YEALINK_H + +/* Using the control channel on interface 3 various aspects of the phone + * can be controlled like LCD, LED, dialtone and the ringtone. + */ + +struct yld_ctl_packet { + u8 cmd; /* command code, see below */ + u8 size; /* 1-11, size of used data bytes. */ + u16 offset; /* internal packet offset */ + u8 data[11]; + s8 sum; /* negative sum of 15 preceding bytes */ +} __attribute__ ((packed)); + +#define USB_PKT_LEN sizeof(struct yld_ctl_packet) + +/* The following yld_ctl_packet's are available: */ + +/* Init registers + * + * cmd 0x8e + * size 10 + * offset 0 + * data 0,0,0,0.... + */ +#define CMD_INIT 0x8e + +/* Request key scan + * + * cmd 0x80 + * size 1 + * offset 0 + * data[0] on return returns the key number, if it changes there's a new + * key pressed. + */ +#define CMD_KEYPRESS 0x80 + +/* Request scancode + * + * cmd 0x81 + * size 1 + * offset key number [0-1f] + * data[0] on return returns the scancode + */ +#define CMD_SCANCODE 0x81 + +/* Set LCD + * + * cmd 0x04 + * size 1-11 + * offset 0-23 + * data segment bits + */ +#define CMD_LCD 0x04 + +/* Set led + * + * cmd 0x05 + * size 1 + * offset 0 + * data[0] 0 OFF / 1 ON + */ +#define CMD_LED 0x05 + +/* Set ringtone volume + * + * cmd 0x11 + * size 1 + * offset 0 + * data[0] 0-0xff volume + */ +#define CMD_RING_VOLUME 0x11 + +/* Set ringtone notes + * + * cmd 0x02 + * size 1-11 + * offset 0-> + * data binary representation LE16(-freq), LE16(duration) .... + */ +#define CMD_RING_NOTE 0x02 + +/* Sound ringtone via the speaker on the back + * + * cmd 0x03 + * size 1 + * offset 0 + * data[0] 0 OFF / 0x24 ON + */ +#define CMD_RINGTONE 0x03 + +/* Sound dial tone via the ear speaker + * + * cmd 0x09 + * size 1 + * offset 0 + * data[0] 0 OFF / 1 ON + */ +#define CMD_DIALTONE 0x09 + +#endif /* INPUT_YEALINK_H */ + + +#if defined(_SEG) && defined(_PIC) +/* This table maps the LCD segments onto individual bit positions in the + * yld_status struct. + */ + +/* LCD, each segment must be driven seperately. + * + * Layout: + * + * |[] [][] [][] [][] in |[][] + * |[] M [][] D [][] : [][] out |[][] + * store + * + * NEW REP SU MO TU WE TH FR SA + * + * [] [] [] [] [] [] [] [] [] [] [] [] + * [] [] [] [] [] [] [] [] [] [] [] [] + */ + +/* Line 1 + * Format : 18.e8.M8.88...188 + * Icon names : M D : IN OUT STORE + */ +#define LCD_LINE1_OFFSET 0 +#define LCD_LINE1_SIZE 17 + +/* Note: first g then f => ! ! */ +/* _SEG( type a b c d e g f ) */ + _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ), + _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ), + _PIC('.', 22,1 , "M" ), + _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ), + _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ), + _PIC('.', 15,8 , "D" ), + _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ), + _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ), + _PIC('.', 11,8 , ":" ), + _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ), + _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ), + _PIC('.', 7,1 , "IN" ), + _PIC('.', 7,2 , "OUT" ), + _PIC('.', 7,4 , "STORE" ), + _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ), + _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ), + _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ), + +/* Line 2 + * Format : ......... + * Pict. name : NEW REP SU MO TU WE TH FR SA + */ +#define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE +#define LCD_LINE2_SIZE 9 + + _PIC('.', 23,2 , "NEW" ), + _PIC('.', 23,4 , "REP" ), + _PIC('.', 1,8 , "SU" ), + _PIC('.', 1,4 , "MO" ), + _PIC('.', 1,2 , "TU" ), + _PIC('.', 1,1 , "WE" ), + _PIC('.', 0,1 , "TH" ), + _PIC('.', 0,2 , "FR" ), + _PIC('.', 0,4 , "SA" ), + +/* Line 3 + * Format : 888888888888 + */ +#define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE +#define LCD_LINE3_SIZE 12 + + _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ), + _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ), + _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ), + _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ), + _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ), + _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ), + _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ), + _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ), + _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ), + _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ), + _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ), + _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ), + +/* Line 4 + * + * The LED, DIALTONE and RINGTONE are implemented as icons and use the same + * sysfs interface. + */ +#define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE + + _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ), + _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ), + _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ), + +#undef _SEG +#undef _PIC +#endif /* _SEG && _PIC */ diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 9980a4d..b847bbc 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -85,8 +85,6 @@ source "drivers/usb/class/Kconfig" source "drivers/usb/storage/Kconfig" -source "drivers/usb/input/Kconfig" - source "drivers/usb/image/Kconfig" source "drivers/usb/net/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 7059a64..0ef090b 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -23,9 +23,6 @@ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ -obj-$(CONFIG_USB_ATI_REMOTE) += input/ -obj-$(CONFIG_USB_POWERMATE) += input/ - obj-$(CONFIG_USB_CATC) += net/ obj-$(CONFIG_USB_KAWETH) += net/ obj-$(CONFIG_USB_PEGASUS) += net/ diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig deleted file mode 100644 index 4959dcf..0000000 --- a/drivers/usb/input/Kconfig +++ /dev/null @@ -1,77 +0,0 @@ -# -# USB Input driver configuration -# -comment "USB Input Devices" - depends on USB - -config USB_POWERMATE - tristate "Griffin PowerMate and Contour Jog support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use Griffin PowerMate or Contour Jog devices. - These are aluminum dials which can measure clockwise and anticlockwise - rotation. The dial also acts as a pushbutton. The base contains an LED - which can be instructed to pulse or to switch to a particular intensity. - - You can download userspace tools from - . - - To compile this driver as a module, choose M here: the - module will be called powermate. - -config USB_YEALINK - tristate "Yealink usb-p1k voip phone" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to enable keyboard and LCD functions of the - Yealink usb-p1k usb phones. The audio part is enabled by the generic - usb sound driver, so you might want to enable that as well. - - For information about how to use these additional functions, see - . - - To compile this driver as a module, choose M here: the module will be - called yealink. - -config USB_ATI_REMOTE - tristate "ATI / X10 USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or X10 "Lola" USB remote control. - These are RF remotes with USB receivers. - The ATI remote comes with many of ATI's All-In-Wonder video cards. - The X10 "Lola" remote is available at: - - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - -config USB_ATI_REMOTE2 - tristate "ATI / Philips USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or Philips USB RF remote control. - These are RF remotes with USB receivers. - ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards - and is also available as a separate product. - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote2. - -config USB_KEYSPAN_REMOTE - tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to use a Keyspan DMR USB remote control. - Currently only the UIA-11 type of receiver has been tested. The tag - on the receiver that connects to the USB port should have a P/N that - will tell you what type of DMR you have. The UIA-10 type is not - supported at this time. This driver maps all buttons to keypress - events. - - To compile this driver as a module, choose M here: the module will - be called keyspan_remote. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile deleted file mode 100644 index 91df130..0000000 --- a/drivers/usb/input/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the USB input drivers -# - -obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o -obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_USB_POWERMATE) += powermate.o -obj-$(CONFIG_USB_YEALINK) += yealink.o - -ifeq ($(CONFIG_USB_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c deleted file mode 100644 index 471aab2..0000000 --- a/drivers/usb/input/ati_remote.c +++ /dev/null @@ -1,862 +0,0 @@ -/* - * USB ATI Remote support - * - * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman - * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev - * - * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including - * porting to the 2.6 kernel interfaces, along with other modification - * to better match the style of the existing usb/input drivers. However, the - * protocol and hardware handling is essentially unchanged from 2.1.1. - * - * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by - * Vojtech Pavlik. - * - * Changes: - * - * Feb 2004: Torrey Hoffman - * Version 2.2.0 - * Jun 2004: Torrey Hoffman - * Version 2.2.1 - * Added key repeat support contributed by: - * Vincent Vanackere - * Added support for the "Lola" remote contributed by: - * Seth Cohn - * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * - * Hardware & software notes - * - * These remote controls are distributed by ATI as part of their - * "All-In-Wonder" video card packages. The receiver self-identifies as a - * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". - * - * The "Lola" remote is available from X10. See: - * http://www.x10.com/products/lola_sg1.htm - * The Lola is similar to the ATI remote but has no mouse support, and slightly - * different keys. - * - * It is possible to use multiple receivers and remotes on multiple computers - * simultaneously by configuring them to use specific channels. - * - * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. - * Actually, it may even support more, at least in some revisions of the - * hardware. - * - * Each remote can be configured to transmit on one channel as follows: - * - Press and hold the "hand icon" button. - * - When the red LED starts to blink, let go of the "hand icon" button. - * - When it stops blinking, input the channel code as two digits, from 01 - * to 16, and press the hand icon again. - * - * The timing can be a little tricky. Try loading the module with debug=1 - * to have the kernel print out messages about the remote control number - * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. - * - * The driver has a "channel_mask" parameter. This bitmask specifies which - * channels will be ignored by the module. To mask out channels, just add - * all the 2^channel_number values together. - * - * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote - * ignore signals coming from remote controls transmitting on channel 4, but - * accept all other channels. - * - * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be - * ignored. - * - * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this - * parameter are unused. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Module and Version Information, Module Parameters - */ - -#define ATI_REMOTE_VENDOR_ID 0x0bc7 -#define ATI_REMOTE_PRODUCT_ID 0x004 -#define LOLA_REMOTE_PRODUCT_ID 0x002 -#define MEDION_REMOTE_PRODUCT_ID 0x006 - -#define DRIVER_VERSION "2.2.1" -#define DRIVER_AUTHOR "Torrey Hoffman " -#define DRIVER_DESC "ATI/X10 RF USB Remote Control" - -#define NAME_BUFSIZE 80 /* size of product name, path buffers */ -#define DATA_BUFSIZE 63 /* size of URB data buffers */ - -/* - * Duplicate event filtering time. - * Sequential, identical KIND_FILTERED inputs with less than - * FILTER_TIME milliseconds between them are considered as repeat - * events. The hardware generates 5 events for the first keypress - * and we have to take this into account for an accurate repeat - * behaviour. - */ -#define FILTER_TIME 60 /* msec */ -#define REPEAT_DELAY 500 /* msec */ - -static unsigned long channel_mask; -module_param(channel_mask, ulong, 0644); -MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); - -static int repeat_filter = FILTER_TIME; -module_param(repeat_filter, int, 0644); -MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); - -static int repeat_delay = REPEAT_DELAY; -module_param(repeat_delay, int, 0644); -MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); - -#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) -#undef err -#define err(format, arg...) printk(KERN_ERR format , ## arg) - -static struct usb_device_id ati_remote_table[] = { - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, ati_remote_table); - -/* Get hi and low bytes of a 16-bits int */ -#define HI(a) ((unsigned char)((a) >> 8)) -#define LO(a) ((unsigned char)((a) & 0xff)) - -#define SEND_FLAG_IN_PROGRESS 1 -#define SEND_FLAG_COMPLETE 2 - -/* Device initialization strings */ -static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; -static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; - -struct ati_remote { - struct input_dev *idev; - struct usb_device *udev; - struct usb_interface *interface; - - struct urb *irq_urb; - struct urb *out_urb; - struct usb_endpoint_descriptor *endpoint_in; - struct usb_endpoint_descriptor *endpoint_out; - unsigned char *inbuf; - unsigned char *outbuf; - dma_addr_t inbuf_dma; - dma_addr_t outbuf_dma; - - unsigned char old_data[2]; /* Detect duplicate events */ - unsigned long old_jiffies; - unsigned long acc_jiffies; /* handle acceleration */ - unsigned long first_jiffies; - - unsigned int repeat_count; - - char name[NAME_BUFSIZE]; - char phys[NAME_BUFSIZE]; - - wait_queue_head_t wait; - int send_flags; -}; - -/* "Kinds" of messages sent from the hardware to the driver. */ -#define KIND_END 0 -#define KIND_LITERAL 1 /* Simply pass to input system */ -#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ -#define KIND_LU 3 /* Directional keypad diagonals - left up, */ -#define KIND_RU 4 /* right up, */ -#define KIND_LD 5 /* left down, */ -#define KIND_RD 6 /* right down */ -#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ - -/* Translation table from hardware messages to input events. */ -static const struct { - short kind; - unsigned char data1, data2; - int type; - unsigned int code; - int value; -} ati_remote_tbl[] = { - /* Directional control pad axes */ - {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ - {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ - {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ - {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ - /* Directional control pad diagonals */ - {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ - {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ - {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ - {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ - - /* "Mouse button" buttons */ - {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ - {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ - {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ - {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ - - /* Artificial "doubleclick" events are generated by the hardware. - * They are mapped to the "side" and "extra" mouse buttons here. */ - {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ - {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ - - /* keyboard. */ - {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1}, - {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1}, - {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1}, - {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1}, - {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1}, - {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1}, - {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1}, - {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1}, - {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1}, - {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1}, - {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1}, - {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1}, - {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1}, - {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1}, - {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1}, - {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1}, - - /* "special" keys */ - {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */ - {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */ - {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */ - {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */ - {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */ - {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */ - {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */ - {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */ - {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */ - {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */ - {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */ - {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */ - {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */ - {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */ - {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */ - {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */ - {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */ - {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */ - {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */ - {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */ - {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */ - {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */ - {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */ - {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */ - {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ - {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */ - {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */ - {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */ - {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */ - {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */ - {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */ - {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ - - {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} -}; - -/* Local function prototypes */ -static void ati_remote_dump (unsigned char *data, unsigned int actual_length); -static int ati_remote_open (struct input_dev *inputdev); -static void ati_remote_close (struct input_dev *inputdev); -static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); -static void ati_remote_irq_out (struct urb *urb); -static void ati_remote_irq_in (struct urb *urb); -static void ati_remote_input_report (struct urb *urb); -static int ati_remote_initialize (struct ati_remote *ati_remote); -static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id); -static void ati_remote_disconnect (struct usb_interface *interface); - -/* usb specific object to register with the usb subsystem */ -static struct usb_driver ati_remote_driver = { - .name = "ati_remote", - .probe = ati_remote_probe, - .disconnect = ati_remote_disconnect, - .id_table = ati_remote_table, -}; - -/* - * ati_remote_dump_input - */ -static void ati_remote_dump(unsigned char *data, unsigned int len) -{ - if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00)) - warn("Weird byte 0x%02x", data[0]); - else if (len == 4) - warn("Weird key %02x %02x %02x %02x", - data[0], data[1], data[2], data[3]); - else - warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...", - len, data[0], data[1], data[2], data[3], data[4], data[5]); -} - -/* - * ati_remote_open - */ -static int ati_remote_open(struct input_dev *inputdev) -{ - struct ati_remote *ati_remote = input_get_drvdata(inputdev); - - /* On first open, submit the read urb which was set up previously. */ - ati_remote->irq_urb->dev = ati_remote->udev; - if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { - dev_err(&ati_remote->interface->dev, - "%s: usb_submit_urb failed!\n", __FUNCTION__); - return -EIO; - } - - return 0; -} - -/* - * ati_remote_close - */ -static void ati_remote_close(struct input_dev *inputdev) -{ - struct ati_remote *ati_remote = input_get_drvdata(inputdev); - - usb_kill_urb(ati_remote->irq_urb); -} - -/* - * ati_remote_irq_out - */ -static void ati_remote_irq_out(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - - if (urb->status) { - dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", - __FUNCTION__, urb->status); - return; - } - - ati_remote->send_flags |= SEND_FLAG_COMPLETE; - wmb(); - wake_up(&ati_remote->wait); -} - -/* - * ati_remote_sendpacket - * - * Used to send device initialization strings - */ -static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data) -{ - int retval = 0; - - /* Set up out_urb */ - memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); - ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); - - ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; - ati_remote->out_urb->dev = ati_remote->udev; - ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; - - retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); - if (retval) { - dev_dbg(&ati_remote->interface->dev, - "sendpacket: usb_submit_urb failed: %d\n", retval); - return retval; - } - - wait_event_timeout(ati_remote->wait, - ((ati_remote->out_urb->status != -EINPROGRESS) || - (ati_remote->send_flags & SEND_FLAG_COMPLETE)), - HZ); - usb_kill_urb(ati_remote->out_urb); - - return retval; -} - -/* - * ati_remote_event_lookup - */ -static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) -{ - int i; - - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { - /* - * Decide if the table entry matches the remote input. - */ - if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) && - ((((ati_remote_tbl[i].data1 >> 4) - - (d1 >> 4) + rem) & 0x0f) == 0x0f) && - (ati_remote_tbl[i].data2 == d2)) - return i; - - } - return -1; -} - -/* - * ati_remote_compute_accel - * - * Implements acceleration curve for directional control pad - * If elapsed time since last event is > 1/4 second, user "stopped", - * so reset acceleration. Otherwise, user is probably holding the control - * pad down, so we increase acceleration, ramping up over two seconds to - * a maximum speed. - */ -static int ati_remote_compute_accel(struct ati_remote *ati_remote) -{ - static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; - unsigned long now = jiffies; - int acc; - - if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { - acc = 1; - ati_remote->acc_jiffies = now; - } - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) - acc = accel[0]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) - acc = accel[1]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) - acc = accel[2]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) - acc = accel[3]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) - acc = accel[4]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) - acc = accel[5]; - else - acc = accel[6]; - - return acc; -} - -/* - * ati_remote_report_input - */ -static void ati_remote_input_report(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = ati_remote->idev; - int index, acc; - int remote_num; - - /* Deal with strange looking inputs */ - if ( (urb->actual_length != 4) || (data[0] != 0x14) || - ((data[3] & 0x0f) != 0x00) ) { - ati_remote_dump(data, urb->actual_length); - return; - } - - /* Mask unwanted remote channels. */ - /* note: remote_num is 0-based, channel 1 on remote == 0 here */ - remote_num = (data[3] >> 4) & 0x0f; - if (channel_mask & (1 << (remote_num + 1))) { - dbginfo(&ati_remote->interface->dev, - "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n", - remote_num, data[1], data[2], channel_mask); - return; - } - - /* Look up event code index in translation table */ - index = ati_remote_event_lookup(remote_num, data[1], data[2]); - if (index < 0) { - dev_warn(&ati_remote->interface->dev, - "Unknown input from channel 0x%02x: data %02x,%02x\n", - remote_num, data[1], data[2]); - return; - } - dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n", - remote_num, data[1], data[2], index, ati_remote_tbl[index].code); - - if (ati_remote_tbl[index].kind == KIND_LITERAL) { - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value); - input_sync(dev); - - ati_remote->old_jiffies = jiffies; - return; - } - - if (ati_remote_tbl[index].kind == KIND_FILTERED) { - unsigned long now = jiffies; - - /* Filter duplicate events which happen "too close" together. */ - if (ati_remote->old_data[0] == data[1] && - ati_remote->old_data[1] == data[2] && - time_before(now, ati_remote->old_jiffies + - msecs_to_jiffies(repeat_filter))) { - ati_remote->repeat_count++; - } else { - ati_remote->repeat_count = 0; - ati_remote->first_jiffies = now; - } - - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; - ati_remote->old_jiffies = now; - - /* Ensure we skip at least the 4 first duplicate events (generated - * by a single keypress), and continue skipping until repeat_delay - * msecs have passed - */ - if (ati_remote->repeat_count > 0 && - (ati_remote->repeat_count < 5 || - time_before(now, ati_remote->first_jiffies + - msecs_to_jiffies(repeat_delay)))) - return; - - - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, 1); - input_sync(dev); - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, 0); - input_sync(dev); - - } else { - - /* - * Other event kinds are from the directional control pad, and have an - * acceleration factor applied to them. Without this acceleration, the - * control pad is mostly unusable. - */ - acc = ati_remote_compute_accel(ati_remote); - - switch (ati_remote_tbl[index].kind) { - case KIND_ACCEL: - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value * acc); - break; - case KIND_LU: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_RU: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_LD: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, acc); - break; - case KIND_RD: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, acc); - break; - default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", - ati_remote_tbl[index].kind); - } - input_sync(dev); - - ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; - } -} - -/* - * ati_remote_irq_in - */ -static void ati_remote_irq_in(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - int retval; - - switch (urb->status) { - case 0: /* success */ - ati_remote_input_report(urb); - break; - case -ECONNRESET: /* unlink */ - case -ENOENT: - case -ESHUTDOWN: - dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n", - __FUNCTION__); - return; - default: /* error */ - dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", - __FUNCTION__, urb->status); - } - - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n", - __FUNCTION__, retval); -} - -/* - * ati_remote_alloc_buffers - */ -static int ati_remote_alloc_buffers(struct usb_device *udev, - struct ati_remote *ati_remote) -{ - ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC, - &ati_remote->inbuf_dma); - if (!ati_remote->inbuf) - return -1; - - ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC, - &ati_remote->outbuf_dma); - if (!ati_remote->outbuf) - return -1; - - ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->irq_urb) - return -1; - - ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->out_urb) - return -1; - - return 0; -} - -/* - * ati_remote_free_buffers - */ -static void ati_remote_free_buffers(struct ati_remote *ati_remote) -{ - usb_free_urb(ati_remote->irq_urb); - usb_free_urb(ati_remote->out_urb); - - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); - - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->outbuf, ati_remote->outbuf_dma); -} - -static void ati_remote_input_init(struct ati_remote *ati_remote) -{ - struct input_dev *idev = ati_remote->idev; - int i; - - idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) | - BIT(BTN_SIDE) | BIT(BTN_EXTRA) ); - idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) - if (ati_remote_tbl[i].type == EV_KEY) - set_bit(ati_remote_tbl[i].code, idev->keybit); - - input_set_drvdata(idev, ati_remote); - - idev->open = ati_remote_open; - idev->close = ati_remote_close; - - idev->name = ati_remote->name; - idev->phys = ati_remote->phys; - - usb_to_input_id(ati_remote->udev, &idev->id); - idev->dev.parent = &ati_remote->udev->dev; -} - -static int ati_remote_initialize(struct ati_remote *ati_remote) -{ - struct usb_device *udev = ati_remote->udev; - int pipe, maxp; - - init_waitqueue_head(&ati_remote->wait); - - /* Set up irq_urb */ - pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - - usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, - maxp, ati_remote_irq_in, ati_remote, - ati_remote->endpoint_in->bInterval); - ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; - ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* Set up out_urb */ - pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - - usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, - maxp, ati_remote_irq_out, ati_remote, - ati_remote->endpoint_out->bInterval); - ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; - ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* send initialization strings */ - if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || - (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { - dev_err(&ati_remote->interface->dev, - "Initializing ati_remote hardware failed.\n"); - return -EIO; - } - - return 0; -} - -/* - * ati_remote_probe - */ -static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_host_interface *iface_host = interface->cur_altsetting; - struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; - struct ati_remote *ati_remote; - struct input_dev *input_dev; - int err = -ENOMEM; - - if (iface_host->desc.bNumEndpoints != 2) { - err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__); - return -ENODEV; - } - - endpoint_in = &iface_host->endpoint[0].desc; - endpoint_out = &iface_host->endpoint[1].desc; - - if (!usb_endpoint_is_int_in(endpoint_in)) { - err("%s: Unexpected endpoint_in\n", __FUNCTION__); - return -ENODEV; - } - if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { - err("%s: endpoint_in message size==0? \n", __FUNCTION__); - return -ENODEV; - } - - ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ati_remote || !input_dev) - goto fail1; - - /* Allocate URB buffers, URBs */ - if (ati_remote_alloc_buffers(udev, ati_remote)) - goto fail2; - - ati_remote->endpoint_in = endpoint_in; - ati_remote->endpoint_out = endpoint_out; - ati_remote->udev = udev; - ati_remote->idev = input_dev; - ati_remote->interface = interface; - - usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); - strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); - - if (udev->manufacturer) - strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); - - if (udev->product) - snprintf(ati_remote->name, sizeof(ati_remote->name), - "%s %s", ati_remote->name, udev->product); - - if (!strlen(ati_remote->name)) - snprintf(ati_remote->name, sizeof(ati_remote->name), - DRIVER_DESC "(%04x,%04x)", - le16_to_cpu(ati_remote->udev->descriptor.idVendor), - le16_to_cpu(ati_remote->udev->descriptor.idProduct)); - - ati_remote_input_init(ati_remote); - - /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ - err = ati_remote_initialize(ati_remote); - if (err) - goto fail3; - - /* Set up and register input device */ - err = input_register_device(ati_remote->idev); - if (err) - goto fail3; - - usb_set_intfdata(interface, ati_remote); - return 0; - - fail3: usb_kill_urb(ati_remote->irq_urb); - usb_kill_urb(ati_remote->out_urb); - fail2: ati_remote_free_buffers(ati_remote); - fail1: input_free_device(input_dev); - kfree(ati_remote); - return err; -} - -/* - * ati_remote_disconnect - */ -static void ati_remote_disconnect(struct usb_interface *interface) -{ - struct ati_remote *ati_remote; - - ati_remote = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - if (!ati_remote) { - warn("%s - null device?\n", __FUNCTION__); - return; - } - - usb_kill_urb(ati_remote->irq_urb); - usb_kill_urb(ati_remote->out_urb); - input_unregister_device(ati_remote->idev); - ati_remote_free_buffers(ati_remote); - kfree(ati_remote); -} - -/* - * ati_remote_init - */ -static int __init ati_remote_init(void) -{ - int result; - - result = usb_register(&ati_remote_driver); - if (result) - err("usb_register error #%d\n", result); - else - info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION); - - return result; -} - -/* - * ati_remote_exit - */ -static void __exit ati_remote_exit(void) -{ - usb_deregister(&ati_remote_driver); -} - -/* - * module specification - */ - -module_init(ati_remote_init); -module_exit(ati_remote_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c deleted file mode 100644 index 1031543..0000000 --- a/drivers/usb/input/ati_remote2.c +++ /dev/null @@ -1,543 +0,0 @@ -/* - * ati_remote2 - ATI/Philips USB RF remote driver - * - * Copyright (C) 2005 Ville Syrjala - * Copyright (C) 2007 Peter Stokes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#include - -#define DRIVER_DESC "ATI/Philips USB RF remote driver" -#define DRIVER_VERSION "0.2" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); -MODULE_AUTHOR("Ville Syrjala "); -MODULE_LICENSE("GPL"); - -/* - * ATI Remote Wonder II Channel Configuration - * - * The remote control can by assigned one of sixteen "channels" in order to facilitate - * the use of multiple remote controls within range of each other. - * A remote's "channel" may be altered by pressing and holding the "PC" button for - * approximately 3 seconds, after which the button will slowly flash the count of the - * currently configured "channel", using the numeric keypad enter a number between 1 and - * 16 and then the "PC" button again, the button will slowly flash the count of the - * newly configured "channel". - */ - -static unsigned int channel_mask = 0xFFFF; -module_param(channel_mask, uint, 0644); -MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); - -static unsigned int mode_mask = 0x1F; -module_param(mode_mask, uint, 0644); -MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); - -static struct usb_device_id ati_remote2_id_table[] = { - { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ - { } -}; -MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); - -static struct { - int hw_code; - int key_code; -} ati_remote2_key_table[] = { - { 0x00, KEY_0 }, - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x0c, KEY_POWER }, - { 0x0d, KEY_MUTE }, - { 0x10, KEY_VOLUMEUP }, - { 0x11, KEY_VOLUMEDOWN }, - { 0x20, KEY_CHANNELUP }, - { 0x21, KEY_CHANNELDOWN }, - { 0x28, KEY_FORWARD }, - { 0x29, KEY_REWIND }, - { 0x2c, KEY_PLAY }, - { 0x30, KEY_PAUSE }, - { 0x31, KEY_STOP }, - { 0x37, KEY_RECORD }, - { 0x38, KEY_DVD }, - { 0x39, KEY_TV }, - { 0x54, KEY_MENU }, - { 0x58, KEY_UP }, - { 0x59, KEY_DOWN }, - { 0x5a, KEY_LEFT }, - { 0x5b, KEY_RIGHT }, - { 0x5c, KEY_OK }, - { 0x78, KEY_A }, - { 0x79, KEY_B }, - { 0x7a, KEY_C }, - { 0x7b, KEY_D }, - { 0x7c, KEY_E }, - { 0x7d, KEY_F }, - { 0x82, KEY_ENTER }, - { 0x8e, KEY_VENDOR }, - { 0x96, KEY_COFFEE }, - { 0xa9, BTN_LEFT }, - { 0xaa, BTN_RIGHT }, - { 0xbe, KEY_QUESTION }, - { 0xd5, KEY_FRONT }, - { 0xd0, KEY_EDIT }, - { 0xf9, KEY_INFO }, - { (0x00 << 8) | 0x3f, KEY_PROG1 }, - { (0x01 << 8) | 0x3f, KEY_PROG2 }, - { (0x02 << 8) | 0x3f, KEY_PROG3 }, - { (0x03 << 8) | 0x3f, KEY_PROG4 }, - { (0x04 << 8) | 0x3f, KEY_PC }, - { 0, KEY_RESERVED } -}; - -struct ati_remote2 { - struct input_dev *idev; - struct usb_device *udev; - - struct usb_interface *intf[2]; - struct usb_endpoint_descriptor *ep[2]; - struct urb *urb[2]; - void *buf[2]; - dma_addr_t buf_dma[2]; - - unsigned long jiffies; - int mode; - - char name[64]; - char phys[64]; -}; - -static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); -static void ati_remote2_disconnect(struct usb_interface *interface); - -static struct usb_driver ati_remote2_driver = { - .name = "ati_remote2", - .probe = ati_remote2_probe, - .disconnect = ati_remote2_disconnect, - .id_table = ati_remote2_id_table, -}; - -static int ati_remote2_open(struct input_dev *idev) -{ - struct ati_remote2 *ar2 = input_get_drvdata(idev); - int r; - - r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); - if (r) { - dev_err(&ar2->intf[0]->dev, - "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); - return r; - } - r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); - if (r) { - usb_kill_urb(ar2->urb[0]); - dev_err(&ar2->intf[1]->dev, - "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); - return r; - } - - return 0; -} - -static void ati_remote2_close(struct input_dev *idev) -{ - struct ati_remote2 *ar2 = input_get_drvdata(idev); - - usb_kill_urb(ar2->urb[0]); - usb_kill_urb(ar2->urb[1]); -} - -static void ati_remote2_input_mouse(struct ati_remote2 *ar2) -{ - struct input_dev *idev = ar2->idev; - u8 *data = ar2->buf[0]; - int channel, mode; - - channel = data[0] >> 4; - - if (!((1 << channel) & channel_mask)) - return; - - mode = data[0] & 0x0F; - - if (mode > 4) { - dev_err(&ar2->intf[0]->dev, - "Unknown mode byte (%02x %02x %02x %02x)\n", - data[3], data[2], data[1], data[0]); - return; - } - - if (!((1 << mode) & mode_mask)) - return; - - input_event(idev, EV_REL, REL_X, (s8) data[1]); - input_event(idev, EV_REL, REL_Y, (s8) data[2]); - input_sync(idev); -} - -static int ati_remote2_lookup(unsigned int hw_code) -{ - int i; - - for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) - if (ati_remote2_key_table[i].hw_code == hw_code) - return i; - - return -1; -} - -static void ati_remote2_input_key(struct ati_remote2 *ar2) -{ - struct input_dev *idev = ar2->idev; - u8 *data = ar2->buf[1]; - int channel, mode, hw_code, index; - - channel = data[0] >> 4; - - if (!((1 << channel) & channel_mask)) - return; - - mode = data[0] & 0x0F; - - if (mode > 4) { - dev_err(&ar2->intf[1]->dev, - "Unknown mode byte (%02x %02x %02x %02x)\n", - data[3], data[2], data[1], data[0]); - return; - } - - hw_code = data[2]; - /* - * Mode keys (AUX1-AUX4, PC) all generate the same code byte. - * Use the mode byte to figure out which one was pressed. - */ - if (hw_code == 0x3f) { - /* - * For some incomprehensible reason the mouse pad generates - * events which look identical to the events from the last - * pressed mode key. Naturally we don't want to generate key - * events for the mouse pad so we filter out any subsequent - * events from the same mode key. - */ - if (ar2->mode == mode) - return; - - if (data[1] == 0) - ar2->mode = mode; - - hw_code |= mode << 8; - } - - if (!((1 << mode) & mode_mask)) - return; - - index = ati_remote2_lookup(hw_code); - if (index < 0) { - dev_err(&ar2->intf[1]->dev, - "Unknown code byte (%02x %02x %02x %02x)\n", - data[3], data[2], data[1], data[0]); - return; - } - - switch (data[1]) { - case 0: /* release */ - break; - case 1: /* press */ - ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); - break; - case 2: /* repeat */ - - /* No repeat for mouse buttons. */ - if (ati_remote2_key_table[index].key_code == BTN_LEFT || - ati_remote2_key_table[index].key_code == BTN_RIGHT) - return; - - if (!time_after_eq(jiffies, ar2->jiffies)) - return; - - ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); - break; - default: - dev_err(&ar2->intf[1]->dev, - "Unknown state byte (%02x %02x %02x %02x)\n", - data[3], data[2], data[1], data[0]); - return; - } - - input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); - input_sync(idev); -} - -static void ati_remote2_complete_mouse(struct urb *urb) -{ - struct ati_remote2 *ar2 = urb->context; - int r; - - switch (urb->status) { - case 0: - ati_remote2_input_mouse(ar2); - break; - case -ENOENT: - case -EILSEQ: - case -ECONNRESET: - case -ESHUTDOWN: - dev_dbg(&ar2->intf[0]->dev, - "%s(): urb status = %d\n", __FUNCTION__, urb->status); - return; - default: - dev_err(&ar2->intf[0]->dev, - "%s(): urb status = %d\n", __FUNCTION__, urb->status); - } - - r = usb_submit_urb(urb, GFP_ATOMIC); - if (r) - dev_err(&ar2->intf[0]->dev, - "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); -} - -static void ati_remote2_complete_key(struct urb *urb) -{ - struct ati_remote2 *ar2 = urb->context; - int r; - - switch (urb->status) { - case 0: - ati_remote2_input_key(ar2); - break; - case -ENOENT: - case -EILSEQ: - case -ECONNRESET: - case -ESHUTDOWN: - dev_dbg(&ar2->intf[1]->dev, - "%s(): urb status = %d\n", __FUNCTION__, urb->status); - return; - default: - dev_err(&ar2->intf[1]->dev, - "%s(): urb status = %d\n", __FUNCTION__, urb->status); - } - - r = usb_submit_urb(urb, GFP_ATOMIC); - if (r) - dev_err(&ar2->intf[1]->dev, - "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); -} - -static int ati_remote2_input_init(struct ati_remote2 *ar2) -{ - struct input_dev *idev; - int i, retval; - - idev = input_allocate_device(); - if (!idev) - return -ENOMEM; - - ar2->idev = idev; - input_set_drvdata(idev, ar2); - - idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); - idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); - idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); - for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) - set_bit(ati_remote2_key_table[i].key_code, idev->keybit); - - idev->rep[REP_DELAY] = 250; - idev->rep[REP_PERIOD] = 33; - - idev->open = ati_remote2_open; - idev->close = ati_remote2_close; - - idev->name = ar2->name; - idev->phys = ar2->phys; - - usb_to_input_id(ar2->udev, &idev->id); - idev->dev.parent = &ar2->udev->dev; - - retval = input_register_device(idev); - if (retval) - input_free_device(idev); - - return retval; -} - -static int ati_remote2_urb_init(struct ati_remote2 *ar2) -{ - struct usb_device *udev = ar2->udev; - int i, pipe, maxp; - - for (i = 0; i < 2; i++) { - ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); - if (!ar2->buf[i]) - return -ENOMEM; - - ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); - if (!ar2->urb[i]) - return -ENOMEM; - - pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - maxp = maxp > 4 ? 4 : maxp; - - usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, - i ? ati_remote2_complete_key : ati_remote2_complete_mouse, - ar2, ar2->ep[i]->bInterval); - ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; - ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - } - - return 0; -} - -static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) -{ - int i; - - for (i = 0; i < 2; i++) { - usb_free_urb(ar2->urb[i]); - usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); - } -} - -static int ati_remote2_setup(struct ati_remote2 *ar2) -{ - int r, i, channel; - - /* - * Configure receiver to only accept input from remote "channel" - * channel == 0 -> Accept input from any remote channel - * channel == 1 -> Only accept input from remote channel 1 - * channel == 2 -> Only accept input from remote channel 2 - * ... - * channel == 16 -> Only accept input from remote channel 16 - */ - - channel = 0; - for (i = 0; i < 16; i++) { - if ((1 << i) & channel_mask) { - if (!(~(1 << i) & 0xFFFF & channel_mask)) - channel = i + 1; - break; - } - } - - r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0), - 0x20, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (r) { - dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n", - __FUNCTION__, r); - return r; - } - - return 0; -} - -static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_host_interface *alt = interface->cur_altsetting; - struct ati_remote2 *ar2; - int r; - - if (alt->desc.bInterfaceNumber) - return -ENODEV; - - ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); - if (!ar2) - return -ENOMEM; - - ar2->udev = udev; - - ar2->intf[0] = interface; - ar2->ep[0] = &alt->endpoint[0].desc; - - ar2->intf[1] = usb_ifnum_to_if(udev, 1); - r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); - if (r) - goto fail1; - alt = ar2->intf[1]->cur_altsetting; - ar2->ep[1] = &alt->endpoint[0].desc; - - r = ati_remote2_urb_init(ar2); - if (r) - goto fail2; - - r = ati_remote2_setup(ar2); - if (r) - goto fail2; - - usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); - strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); - - strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); - - r = ati_remote2_input_init(ar2); - if (r) - goto fail2; - - usb_set_intfdata(interface, ar2); - - return 0; - - fail2: - ati_remote2_urb_cleanup(ar2); - - usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); - fail1: - kfree(ar2); - - return r; -} - -static void ati_remote2_disconnect(struct usb_interface *interface) -{ - struct ati_remote2 *ar2; - struct usb_host_interface *alt = interface->cur_altsetting; - - if (alt->desc.bInterfaceNumber) - return; - - ar2 = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - input_unregister_device(ar2->idev); - - ati_remote2_urb_cleanup(ar2); - - usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); - - kfree(ar2); -} - -static int __init ati_remote2_init(void) -{ - int r; - - r = usb_register(&ati_remote2_driver); - if (r) - printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); - else - printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); - - return r; -} - -static void __exit ati_remote2_exit(void) -{ - usb_deregister(&ati_remote2_driver); -} - -module_init(ati_remote2_init); -module_exit(ati_remote2_exit); diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c deleted file mode 100644 index 1bffc9f..0000000 --- a/drivers/usb/input/keyspan_remote.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * keyspan_remote: USB driver for the Keyspan DMR - * - * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - * This driver has been put together with the support of Innosys, Inc. - * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product. - */ - -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_VERSION "v0.1" -#define DRIVER_AUTHOR "Michael Downey " -#define DRIVER_DESC "Driver for the USB Keyspan remote control." -#define DRIVER_LICENSE "GPL" - -/* Parameters that can be passed to the driver. */ -static int debug; -module_param(debug, int, 0444); -MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); - -/* Vendor and product ids */ -#define USB_KEYSPAN_VENDOR_ID 0x06CD -#define USB_KEYSPAN_PRODUCT_UIA11 0x0202 - -/* Defines for converting the data from the remote. */ -#define ZERO 0x18 -#define ZERO_MASK 0x1F /* 5 bits for a 0 */ -#define ONE 0x3C -#define ONE_MASK 0x3F /* 6 bits for a 1 */ -#define SYNC 0x3F80 -#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */ -#define STOP 0x00 -#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */ -#define GAP 0xFF - -#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */ - -/* table of devices that work with this driver */ -static struct usb_device_id keyspan_table[] = { - { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, - { } /* Terminating entry */ -}; - -/* Structure to store all the real stuff that a remote sends to us. */ -struct keyspan_message { - u16 system; - u8 button; - u8 toggle; -}; - -/* Structure used for all the bit testing magic needed to be done. */ -struct bit_tester { - u32 tester; - int len; - int pos; - int bits_left; - u8 buffer[32]; -}; - -/* Structure to hold all of our driver specific stuff */ -struct usb_keyspan { - char name[128]; - char phys[64]; - struct usb_device* udev; - struct input_dev *input; - struct usb_interface* interface; - struct usb_endpoint_descriptor* in_endpoint; - struct urb* irq_urb; - int open; - dma_addr_t in_dma; - unsigned char* in_buffer; - - /* variables used to parse messages from remote. */ - struct bit_tester data; - int stage; - int toggle; -}; - -/* - * Table that maps the 31 possible keycodes to input keys. - * Currently there are 15 and 17 button models so RESERVED codes - * are blank areas in the mapping. - */ -static const int keyspan_key_table[] = { - KEY_RESERVED, /* 0 is just a place holder. */ - KEY_RESERVED, - KEY_STOP, - KEY_PLAYCD, - KEY_RESERVED, - KEY_PREVIOUSSONG, - KEY_REWIND, - KEY_FORWARD, - KEY_NEXTSONG, - KEY_RESERVED, - KEY_RESERVED, - KEY_RESERVED, - KEY_PAUSE, - KEY_VOLUMEUP, - KEY_RESERVED, - KEY_RESERVED, - KEY_RESERVED, - KEY_VOLUMEDOWN, - KEY_RESERVED, - KEY_UP, - KEY_RESERVED, - KEY_MUTE, - KEY_LEFT, - KEY_ENTER, - KEY_RIGHT, - KEY_RESERVED, - KEY_RESERVED, - KEY_DOWN, - KEY_RESERVED, - KEY_KPASTERISK, - KEY_RESERVED, - KEY_MENU -}; - -static struct usb_driver keyspan_driver; - -/* - * Debug routine that prints out what we've received from the remote. - */ -static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ -{ - char codes[4 * RECV_SIZE]; - int i; - - for (i = 0; i < RECV_SIZE; i++) - snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); - - dev_info(&dev->udev->dev, "%s\n", codes); -} - -/* - * Routine that manages the bit_tester structure. It makes sure that there are - * at least bits_needed bits loaded into the tester. - */ -static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) -{ - if (dev->data.bits_left >= bits_needed) - return 0; - - /* - * Somehow we've missed the last message. The message will be repeated - * though so it's not too big a deal - */ - if (dev->data.pos >= dev->data.len) { - dev_dbg(&dev->udev->dev, - "%s - Error ran out of data. pos: %d, len: %d\n", - __FUNCTION__, dev->data.pos, dev->data.len); - return -1; - } - - /* Load as much as we can into the tester. */ - while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) && - (dev->data.pos < dev->data.len)) { - dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left); - dev->data.bits_left += 8; - } - - return 0; -} - -/* - * Routine that handles all the logic needed to parse out the message from the remote. - */ -static void keyspan_check_data(struct usb_keyspan *remote) -{ - int i; - int found = 0; - struct keyspan_message message; - - switch(remote->stage) { - case 0: - /* - * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler. - * So the first byte that isn't a FF should be the start of a new message. - */ - for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i); - - if (i < RECV_SIZE) { - memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE); - remote->data.len = RECV_SIZE; - remote->data.pos = 0; - remote->data.tester = 0; - remote->data.bits_left = 0; - remote->stage = 1; - } - break; - - case 1: - /* - * Stage 1 we should have 16 bytes and should be able to detect a - * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's. - */ - memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); - remote->data.len += RECV_SIZE; - - found = 0; - while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) { - for (i = 0; i < 8; ++i) { - if (keyspan_load_tester(remote, 14) != 0) { - remote->stage = 0; - return; - } - - if ((remote->data.tester & SYNC_MASK) == SYNC) { - remote->data.tester = remote->data.tester >> 14; - remote->data.bits_left -= 14; - found = 1; - break; - } else { - remote->data.tester = remote->data.tester >> 1; - --remote->data.bits_left; - } - } - } - - if (!found) { - remote->stage = 0; - remote->data.len = 0; - } else { - remote->stage = 2; - } - break; - - case 2: - /* - * Stage 2 we should have 24 bytes which will be enough for a full - * message. We need to parse out the system code, button code, - * toggle code, and stop. - */ - memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); - remote->data.len += RECV_SIZE; - - message.system = 0; - for (i = 0; i < 9; i++) { - keyspan_load_tester(remote, 6); - - if ((remote->data.tester & ZERO_MASK) == ZERO) { - message.system = message.system << 1; - remote->data.tester = remote->data.tester >> 5; - remote->data.bits_left -= 5; - } else if ((remote->data.tester & ONE_MASK) == ONE) { - message.system = (message.system << 1) + 1; - remote->data.tester = remote->data.tester >> 6; - remote->data.bits_left -= 6; - } else { - err("%s - Unknown sequence found in system data.\n", __FUNCTION__); - remote->stage = 0; - return; - } - } - - message.button = 0; - for (i = 0; i < 5; i++) { - keyspan_load_tester(remote, 6); - - if ((remote->data.tester & ZERO_MASK) == ZERO) { - message.button = message.button << 1; - remote->data.tester = remote->data.tester >> 5; - remote->data.bits_left -= 5; - } else if ((remote->data.tester & ONE_MASK) == ONE) { - message.button = (message.button << 1) + 1; - remote->data.tester = remote->data.tester >> 6; - remote->data.bits_left -= 6; - } else { - err("%s - Unknown sequence found in button data.\n", __FUNCTION__); - remote->stage = 0; - return; - } - } - - keyspan_load_tester(remote, 6); - if ((remote->data.tester & ZERO_MASK) == ZERO) { - message.toggle = 0; - remote->data.tester = remote->data.tester >> 5; - remote->data.bits_left -= 5; - } else if ((remote->data.tester & ONE_MASK) == ONE) { - message.toggle = 1; - remote->data.tester = remote->data.tester >> 6; - remote->data.bits_left -= 6; - } else { - err("%s - Error in message, invalid toggle.\n", __FUNCTION__); - remote->stage = 0; - return; - } - - keyspan_load_tester(remote, 5); - if ((remote->data.tester & STOP_MASK) == STOP) { - remote->data.tester = remote->data.tester >> 5; - remote->data.bits_left -= 5; - } else { - err("Bad message recieved, no stop bit found.\n"); - } - - dev_dbg(&remote->udev->dev, - "%s found valid message: system: %d, button: %d, toggle: %d\n", - __FUNCTION__, message.system, message.button, message.toggle); - - if (message.toggle != remote->toggle) { - input_report_key(remote->input, keyspan_key_table[message.button], 1); - input_report_key(remote->input, keyspan_key_table[message.button], 0); - input_sync(remote->input); - remote->toggle = message.toggle; - } - - remote->stage = 0; - break; - } -} - -/* - * Routine for sending all the initialization messages to the remote. - */ -static int keyspan_setup(struct usb_device* dev) -{ - int retval = 0; - - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0); - if (retval) { - dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n", - __FUNCTION__, retval); - return(retval); - } - - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 0x44, 0x40, 0x0, 0x0, NULL, 0, 0); - if (retval) { - dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n", - __FUNCTION__, retval); - return(retval); - } - - retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 0x22, 0x40, 0x0, 0x0, NULL, 0, 0); - if (retval) { - dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n", - __FUNCTION__, retval); - return(retval); - } - - dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__); - return(retval); -} - -/* - * Routine used to handle a new message that has come in. - */ -static void keyspan_irq_recv(struct urb *urb) -{ - struct usb_keyspan *dev = urb->context; - int retval; - - /* Check our status in case we need to bail out early. */ - switch (urb->status) { - case 0: - break; - - /* Device went away so don't keep trying to read from it. */ - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - return; - - default: - goto resubmit; - break; - } - - if (debug) - keyspan_print(dev); - - keyspan_check_data(dev); - -resubmit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval); -} - -static int keyspan_open(struct input_dev *dev) -{ - struct usb_keyspan *remote = input_get_drvdata(dev); - - remote->irq_urb->dev = remote->udev; - if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) - return -EIO; - - return 0; -} - -static void keyspan_close(struct input_dev *dev) -{ - struct usb_keyspan *remote = input_get_drvdata(dev); - - usb_kill_urb(remote->irq_urb); -} - -static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) -{ - - struct usb_endpoint_descriptor *endpoint; - int i; - - for (i = 0; i < iface->desc.bNumEndpoints; ++i) { - endpoint = &iface->endpoint[i].desc; - - if (usb_endpoint_is_int_in(endpoint)) { - /* we found our interrupt in endpoint */ - return endpoint; - } - } - - return NULL; -} - -/* - * Routine that sets up the driver to handle a specific USB device detected on the bus. - */ -static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_endpoint_descriptor *endpoint; - struct usb_keyspan *remote; - struct input_dev *input_dev; - int i, error; - - endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); - if (!endpoint) - return -ENODEV; - - remote = kzalloc(sizeof(*remote), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!remote || !input_dev) { - error = -ENOMEM; - goto fail1; - } - - remote->udev = udev; - remote->input = input_dev; - remote->interface = interface; - remote->in_endpoint = endpoint; - remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ - - remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma); - if (!remote->in_buffer) { - error = -ENOMEM; - goto fail1; - } - - remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!remote->irq_urb) { - error = -ENOMEM; - goto fail2; - } - - error = keyspan_setup(udev); - if (error) { - error = -ENODEV; - goto fail3; - } - - if (udev->manufacturer) - strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); - - if (udev->product) { - if (udev->manufacturer) - strlcat(remote->name, " ", sizeof(remote->name)); - strlcat(remote->name, udev->product, sizeof(remote->name)); - } - - if (!strlen(remote->name)) - snprintf(remote->name, sizeof(remote->name), - "USB Keyspan Remote %04x:%04x", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct)); - - usb_make_path(udev, remote->phys, sizeof(remote->phys)); - strlcat(remote->phys, "/input0", sizeof(remote->phys)); - - input_dev->name = remote->name; - input_dev->phys = remote->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &interface->dev; - - input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ - for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) - if (keyspan_key_table[i] != KEY_RESERVED) - set_bit(keyspan_key_table[i], input_dev->keybit); - - input_set_drvdata(input_dev, remote); - - input_dev->open = keyspan_open; - input_dev->close = keyspan_close; - - /* - * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() - */ - usb_fill_int_urb(remote->irq_urb, - remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress), - remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote, - remote->in_endpoint->bInterval); - remote->irq_urb->transfer_dma = remote->in_dma; - remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* we can register the device now, as it is ready */ - error = input_register_device(remote->input); - if (error) - goto fail3; - - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, remote); - - return 0; - - fail3: usb_free_urb(remote->irq_urb); - fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - fail1: kfree(remote); - input_free_device(input_dev); - - return error; -} - -/* - * Routine called when a device is disconnected from the USB. - */ -static void keyspan_disconnect(struct usb_interface *interface) -{ - struct usb_keyspan *remote; - - remote = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ - input_unregister_device(remote->input); - usb_kill_urb(remote->irq_urb); - usb_free_urb(remote->irq_urb); - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - kfree(remote); - } -} - -/* - * Standard driver set up sections - */ -static struct usb_driver keyspan_driver = -{ - .name = "keyspan_remote", - .probe = keyspan_probe, - .disconnect = keyspan_disconnect, - .id_table = keyspan_table -}; - -static int __init usb_keyspan_init(void) -{ - int result; - - /* register this driver with the USB subsystem */ - result = usb_register(&keyspan_driver); - if (result) - err("usb_register failed. Error number %d\n", result); - - return result; -} - -static void __exit usb_keyspan_exit(void) -{ - /* deregister this driver with the USB subsystem */ - usb_deregister(&keyspan_driver); -} - -module_init(usb_keyspan_init); -module_exit(usb_keyspan_exit); - -MODULE_DEVICE_TABLE(usb, keyspan_table); -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h deleted file mode 100644 index a424094..0000000 --- a/drivers/usb/input/map_to_7segment.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * drivers/usb/input/map_to_7segment.h - * - * Copyright (c) 2005 Henk Vergonet - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef MAP_TO_7SEGMENT_H -#define MAP_TO_7SEGMENT_H - -/* This file provides translation primitives and tables for the conversion - * of (ASCII) characters to a 7-segments notation. - * - * The 7 segment's wikipedia notation below is used as standard. - * See: http://en.wikipedia.org/wiki/Seven_segment_display - * - * Notation: +-a-+ - * f b - * +-g-+ - * e c - * +-d-+ - * - * Usage: - * - * Register a map variable, and fill it with a character set: - * static SEG7_DEFAULT_MAP(map_seg7); - * - * - * Then use for conversion: - * seg7 = map_to_seg7(&map_seg7, some_char); - * ... - * - * In device drivers it is recommended, if required, to make the char map - * accessible via the sysfs interface using the following scheme: - * - * static ssize_t show_map(struct device *dev, char *buf) { - * memcpy(buf, &map_seg7, sizeof(map_seg7)); - * return sizeof(map_seg7); - * } - * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) { - * if(cnt != sizeof(map_seg7)) - * return -EINVAL; - * memcpy(&map_seg7, buf, cnt); - * return cnt; - * } - * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map); - * - * History: - * 2005-05-31 RFC linux-kernel@vger.kernel.org - */ -#include - - -#define BIT_SEG7_A 0 -#define BIT_SEG7_B 1 -#define BIT_SEG7_C 2 -#define BIT_SEG7_D 3 -#define BIT_SEG7_E 4 -#define BIT_SEG7_F 5 -#define BIT_SEG7_G 6 -#define BIT_SEG7_RESERVED 7 - -struct seg7_conversion_map { - unsigned char table[128]; -}; - -static inline int map_to_seg7(struct seg7_conversion_map *map, int c) -{ - return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL; -} - -#define SEG7_CONVERSION_MAP(_name, _map) \ - struct seg7_conversion_map _name = { .table = { _map } } - -/* - * It is recommended to use a facility that allows user space to redefine - * custom character sets for LCD devices. Please use a sysfs interface - * as described above. - */ -#define MAP_TO_SEG7_SYSFS_FILE "map_seg7" - -/******************************************************************************* - * ASCII conversion table - ******************************************************************************/ - -#define _SEG7(l,a,b,c,d,e,f,g) \ - ( a<',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\ - _SEG7('@',1,1,0,1,1,1,1), - -#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ - _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\ - _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ - _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\ - _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ - _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\ - _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\ - _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\ - _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ - _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), - -#define _MAP_91_96_ASCII_SEG7_SYMBOL \ - _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\ - _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0), - -#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\ - _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ - _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\ - _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ - _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\ - _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\ - _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\ - _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ - _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), - -#define _MAP_123_126_ASCII_SEG7_SYMBOL \ - _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\ - _SEG7('~',1,0,0,0,0,0,0), - -/* Maps */ - -/* This set tries to map as close as possible to the visible characteristics - * of the ASCII symbol, lowercase and uppercase letters may differ in - * presentation on the display. - */ -#define MAP_ASCII7SEG_ALPHANUM \ - _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ - _MAP_33_47_ASCII_SEG7_SYMBOL \ - _MAP_48_57_ASCII_SEG7_NUMERIC \ - _MAP_58_64_ASCII_SEG7_SYMBOL \ - _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ - _MAP_91_96_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_123_126_ASCII_SEG7_SYMBOL - -/* This set tries to map as close as possible to the symbolic characteristics - * of the ASCII character for maximum discrimination. - * For now this means all alpha chars are in lower case representations. - * (This for example facilitates the use of hex numbers with uppercase input.) - */ -#define MAP_ASCII7SEG_ALPHANUM_LC \ - _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ - _MAP_33_47_ASCII_SEG7_SYMBOL \ - _MAP_48_57_ASCII_SEG7_NUMERIC \ - _MAP_58_64_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_91_96_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_123_126_ASCII_SEG7_SYMBOL - -#define SEG7_DEFAULT_MAP(_name) \ - SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM) - -#endif /* MAP_TO_7SEGMENT_H */ - diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c deleted file mode 100644 index 448a470..0000000 --- a/drivers/usb/input/powermate.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * A driver for the Griffin Technology, Inc. "PowerMate" USB controller dial. - * - * v1.1, (c)2002 William R Sowerbutts - * - * This device is a anodised aluminium knob which connects over USB. It can measure - * clockwise and anticlockwise rotation. The dial also acts as a pushbutton with - * a spring for automatic release. The base contains a pair of LEDs which illuminate - * the translucent base. It rotates without limit and reports its relative rotation - * back to the host when polled by the USB controller. - * - * Testing with the knob I have has shown that it measures approximately 94 "clicks" - * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was - * a variable speed cordless electric drill) has shown that the device can measure - * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from - * the host. If it counts more than 7 clicks before it is polled, it will wrap back - * to zero and start counting again. This was at quite high speed, however, almost - * certainly faster than the human hand could turn it. Griffin say that it loses a - * pulse or two on a direction change; the granularity is so fine that I never - * noticed this in practice. - * - * The device's microcontroller can be programmed to set the LED to either a constant - * intensity, or to a rhythmic pulsing. Several patterns and speeds are available. - * - * Griffin were very happy to provide documentation and free hardware for development. - * - * Some userspace tools are available on the web: http://sowerbutts.com/powermate/ - * - */ - -#include -#include -#include -#include -#include -#include - -#define POWERMATE_VENDOR 0x077d /* Griffin Technology, Inc. */ -#define POWERMATE_PRODUCT_NEW 0x0410 /* Griffin PowerMate */ -#define POWERMATE_PRODUCT_OLD 0x04AA /* Griffin soundKnob */ - -#define CONTOUR_VENDOR 0x05f3 /* Contour Design, Inc. */ -#define CONTOUR_JOG 0x0240 /* Jog and Shuttle */ - -/* these are the command codes we send to the device */ -#define SET_STATIC_BRIGHTNESS 0x01 -#define SET_PULSE_ASLEEP 0x02 -#define SET_PULSE_AWAKE 0x03 -#define SET_PULSE_MODE 0x04 - -/* these refer to bits in the powermate_device's requires_update field. */ -#define UPDATE_STATIC_BRIGHTNESS (1<<0) -#define UPDATE_PULSE_ASLEEP (1<<1) -#define UPDATE_PULSE_AWAKE (1<<2) -#define UPDATE_PULSE_MODE (1<<3) - -/* at least two versions of the hardware exist, with differing payload - sizes. the first three bytes always contain the "interesting" data in - the relevant format. */ -#define POWERMATE_PAYLOAD_SIZE_MAX 6 -#define POWERMATE_PAYLOAD_SIZE_MIN 3 -struct powermate_device { - signed char *data; - dma_addr_t data_dma; - struct urb *irq, *config; - struct usb_ctrlrequest *configcr; - dma_addr_t configcr_dma; - struct usb_device *udev; - struct input_dev *input; - spinlock_t lock; - int static_brightness; - int pulse_speed; - int pulse_table; - int pulse_asleep; - int pulse_awake; - int requires_update; // physical settings which are out of sync - char phys[64]; -}; - -static char pm_name_powermate[] = "Griffin PowerMate"; -static char pm_name_soundknob[] = "Griffin SoundKnob"; - -static void powermate_config_complete(struct urb *urb); - -/* Callback for data arriving from the PowerMate over the USB interrupt pipe */ -static void powermate_irq(struct urb *urb) -{ - struct powermate_device *pm = urb->context; - int retval; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - /* handle updates to device state */ - input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); - input_report_rel(pm->input, REL_DIAL, pm->data[1]); - input_sync(pm->input); - -exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); - if (retval) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, retval); -} - -/* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */ -static void powermate_sync_state(struct powermate_device *pm) -{ - if (pm->requires_update == 0) - return; /* no updates are required */ - if (pm->config->status == -EINPROGRESS) - return; /* an update is already in progress; it'll issue this update when it completes */ - - if (pm->requires_update & UPDATE_PULSE_ASLEEP){ - pm->configcr->wValue = cpu_to_le16( SET_PULSE_ASLEEP ); - pm->configcr->wIndex = cpu_to_le16( pm->pulse_asleep ? 1 : 0 ); - pm->requires_update &= ~UPDATE_PULSE_ASLEEP; - }else if (pm->requires_update & UPDATE_PULSE_AWAKE){ - pm->configcr->wValue = cpu_to_le16( SET_PULSE_AWAKE ); - pm->configcr->wIndex = cpu_to_le16( pm->pulse_awake ? 1 : 0 ); - pm->requires_update &= ~UPDATE_PULSE_AWAKE; - }else if (pm->requires_update & UPDATE_PULSE_MODE){ - int op, arg; - /* the powermate takes an operation and an argument for its pulse algorithm. - the operation can be: - 0: divide the speed - 1: pulse at normal speed - 2: multiply the speed - the argument only has an effect for operations 0 and 2, and ranges between - 1 (least effect) to 255 (maximum effect). - - thus, several states are equivalent and are coalesced into one state. - - we map this onto a range from 0 to 510, with: - 0 -- 254 -- use divide (0 = slowest) - 255 -- use normal speed - 256 -- 510 -- use multiple (510 = fastest). - - Only values of 'arg' quite close to 255 are particularly useful/spectacular. - */ - if (pm->pulse_speed < 255) { - op = 0; // divide - arg = 255 - pm->pulse_speed; - } else if (pm->pulse_speed > 255) { - op = 2; // multiply - arg = pm->pulse_speed - 255; - } else { - op = 1; // normal speed - arg = 0; // can be any value - } - pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE ); - pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op ); - pm->requires_update &= ~UPDATE_PULSE_MODE; - } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) { - pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS ); - pm->configcr->wIndex = cpu_to_le16( pm->static_brightness ); - pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS; - } else { - printk(KERN_ERR "powermate: unknown update required"); - pm->requires_update = 0; /* fudge the bug */ - return; - } - -/* printk("powermate: %04x %04x\n", pm->configcr->wValue, pm->configcr->wIndex); */ - - pm->configcr->bRequestType = 0x41; /* vendor request */ - pm->configcr->bRequest = 0x01; - pm->configcr->wLength = 0; - - usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0), - (void *) pm->configcr, NULL, 0, - powermate_config_complete, pm); - pm->config->setup_dma = pm->configcr_dma; - pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP; - - if (usb_submit_urb(pm->config, GFP_ATOMIC)) - printk(KERN_ERR "powermate: usb_submit_urb(config) failed"); -} - -/* Called when our asynchronous control message completes. We may need to issue another immediately */ -static void powermate_config_complete(struct urb *urb) -{ - struct powermate_device *pm = urb->context; - unsigned long flags; - - if (urb->status) - printk(KERN_ERR "powermate: config urb returned %d\n", urb->status); - - spin_lock_irqsave(&pm->lock, flags); - powermate_sync_state(pm); - spin_unlock_irqrestore(&pm->lock, flags); -} - -/* Set the LED up as described and begin the sync with the hardware if required */ -static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed, - int pulse_table, int pulse_asleep, int pulse_awake) -{ - unsigned long flags; - - if (pulse_speed < 0) - pulse_speed = 0; - if (pulse_table < 0) - pulse_table = 0; - if (pulse_speed > 510) - pulse_speed = 510; - if (pulse_table > 2) - pulse_table = 2; - - pulse_asleep = !!pulse_asleep; - pulse_awake = !!pulse_awake; - - - spin_lock_irqsave(&pm->lock, flags); - - /* mark state updates which are required */ - if (static_brightness != pm->static_brightness) { - pm->static_brightness = static_brightness; - pm->requires_update |= UPDATE_STATIC_BRIGHTNESS; - } - if (pulse_asleep != pm->pulse_asleep) { - pm->pulse_asleep = pulse_asleep; - pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS); - } - if (pulse_awake != pm->pulse_awake) { - pm->pulse_awake = pulse_awake; - pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS); - } - if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) { - pm->pulse_speed = pulse_speed; - pm->pulse_table = pulse_table; - pm->requires_update |= UPDATE_PULSE_MODE; - } - - powermate_sync_state(pm); - - spin_unlock_irqrestore(&pm->lock, flags); -} - -/* Callback from the Input layer when an event arrives from userspace to configure the LED */ -static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value) -{ - unsigned int command = (unsigned int)_value; - struct powermate_device *pm = input_get_drvdata(dev); - - if (type == EV_MSC && code == MSC_PULSELED){ - /* - bits 0- 7: 8 bits: LED brightness - bits 8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster. - bits 17-18: 2 bits: pulse table (0, 1, 2 valid) - bit 19: 1 bit : pulse whilst asleep? - bit 20: 1 bit : pulse constantly? - */ - int static_brightness = command & 0xFF; // bits 0-7 - int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16 - int pulse_table = (command >> 17) & 0x3; // bits 17-18 - int pulse_asleep = (command >> 19) & 0x1; // bit 19 - int pulse_awake = (command >> 20) & 0x1; // bit 20 - - powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake); - } - - return 0; -} - -static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm) -{ - pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX, - GFP_ATOMIC, &pm->data_dma); - if (!pm->data) - return -1; - - pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)), - GFP_ATOMIC, &pm->configcr_dma); - if (!pm->configcr) - return -1; - - return 0; -} - -static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm) -{ - usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, - pm->data, pm->data_dma); - usb_buffer_free(udev, sizeof(*(pm->configcr)), - pm->configcr, pm->configcr_dma); -} - -/* Called whenever a USB device matching one in our supported devices table is connected */ -static int powermate_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev (intf); - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct powermate_device *pm; - struct input_dev *input_dev; - int pipe, maxp; - int error = -ENOMEM; - - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(endpoint)) - return -EIO; - - usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x0a, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, interface->desc.bInterfaceNumber, NULL, 0, - USB_CTRL_SET_TIMEOUT); - - pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!pm || !input_dev) - goto fail1; - - if (powermate_alloc_buffers(udev, pm)) - goto fail2; - - pm->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->irq) - goto fail2; - - pm->config = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->config) - goto fail3; - - pm->udev = udev; - pm->input = input_dev; - - usb_make_path(udev, pm->phys, sizeof(pm->phys)); - strlcpy(pm->phys, "/input0", sizeof(pm->phys)); - - spin_lock_init(&pm->lock); - - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case POWERMATE_PRODUCT_NEW: - input_dev->name = pm_name_powermate; - break; - case POWERMATE_PRODUCT_OLD: - input_dev->name = pm_name_soundknob; - break; - default: - input_dev->name = pm_name_soundknob; - printk(KERN_WARNING "powermate: unknown product id %04x\n", - le16_to_cpu(udev->descriptor.idProduct)); - } - - input_dev->phys = pm->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, pm); - - input_dev->event = powermate_input_event; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); - input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); - input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); - input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); - - /* get a handle to the interrupt data pipe */ - pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - - if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) { - printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", - POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp); - maxp = POWERMATE_PAYLOAD_SIZE_MAX; - } - - usb_fill_int_urb(pm->irq, udev, pipe, pm->data, - maxp, powermate_irq, - pm, endpoint->bInterval); - pm->irq->transfer_dma = pm->data_dma; - pm->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* register our interrupt URB with the USB system */ - if (usb_submit_urb(pm->irq, GFP_KERNEL)) { - error = -EIO; - goto fail4; - } - - error = input_register_device(pm->input); - if (error) - goto fail5; - - - /* force an update of everything */ - pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS; - powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters - - usb_set_intfdata(intf, pm); - return 0; - - fail5: usb_kill_urb(pm->irq); - fail4: usb_free_urb(pm->config); - fail3: usb_free_urb(pm->irq); - fail2: powermate_free_buffers(udev, pm); - fail1: input_free_device(input_dev); - kfree(pm); - return error; -} - -/* Called when a USB device we've accepted ownership of is removed */ -static void powermate_disconnect(struct usb_interface *intf) -{ - struct powermate_device *pm = usb_get_intfdata (intf); - - usb_set_intfdata(intf, NULL); - if (pm) { - pm->requires_update = 0; - usb_kill_urb(pm->irq); - input_unregister_device(pm->input); - usb_free_urb(pm->irq); - usb_free_urb(pm->config); - powermate_free_buffers(interface_to_usbdev(intf), pm); - - kfree(pm); - } -} - -static struct usb_device_id powermate_devices [] = { - { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_NEW) }, - { USB_DEVICE(POWERMATE_VENDOR, POWERMATE_PRODUCT_OLD) }, - { USB_DEVICE(CONTOUR_VENDOR, CONTOUR_JOG) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, powermate_devices); - -static struct usb_driver powermate_driver = { - .name = "powermate", - .probe = powermate_probe, - .disconnect = powermate_disconnect, - .id_table = powermate_devices, -}; - -static int __init powermate_init(void) -{ - return usb_register(&powermate_driver); -} - -static void __exit powermate_cleanup(void) -{ - usb_deregister(&powermate_driver); -} - -module_init(powermate_init); -module_exit(powermate_cleanup); - -MODULE_AUTHOR( "William R Sowerbutts" ); -MODULE_DESCRIPTION( "Griffin Technology, Inc PowerMate driver" ); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c deleted file mode 100644 index fc645b2..0000000 --- a/drivers/usb/input/yealink.c +++ /dev/null @@ -1,1004 +0,0 @@ -/* - * drivers/usb/input/yealink.c - * - * Copyright (c) 2005 Henk Vergonet - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* - * Description: - * Driver for the USB-P1K voip usb phone. - * This device is produced by Yealink Network Technology Co Ltd - * but may be branded under several names: - * - Yealink usb-p1k - * - Tiptel 115 - * - ... - * - * This driver is based on: - * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/ - * - information from http://memeteau.free.fr/usbb2k - * - the xpad-driver drivers/usb/input/xpad.c - * - * Thanks to: - * - Olivier Vandorpe, for providing the usbb2k-api. - * - Martin Diehl, for spotting my memory allocation bug. - * - * History: - * 20050527 henk First version, functional keyboard. Keyboard events - * will pop-up on the ../input/eventX bus. - * 20050531 henk Added led, LCD, dialtone and sysfs interface. - * 20050610 henk Cleanups, make it ready for public consumption. - * 20050630 henk Cleanups, fixes in response to comments. - * 20050701 henk sysfs write serialisation, fix potential unload races - * 20050801 henk Added ringtone, restructure USB - * 20050816 henk Merge 2.6.13-rc6 - */ - -#include -#include -#include -#include -#include -#include - -#include "map_to_7segment.h" -#include "yealink.h" - -#define DRIVER_VERSION "yld-20051230" -#define DRIVER_AUTHOR "Henk Vergonet" -#define DRIVER_DESC "Yealink phone driver" - -#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */ - -struct yld_status { - u8 lcd[24]; - u8 led; - u8 dialtone; - u8 ringtone; - u8 keynum; -} __attribute__ ((packed)); - -/* - * Register the LCD segment and icon map - */ -#define _LOC(k,l) { .a = (k), .m = (l) } -#define _SEG(t, a, am, b, bm, c, cm, d, dm, e, em, f, fm, g, gm) \ - { .type = (t), \ - .u = { .s = { _LOC(a, am), _LOC(b, bm), _LOC(c, cm), \ - _LOC(d, dm), _LOC(e, em), _LOC(g, gm), \ - _LOC(f, fm) } } } -#define _PIC(t, h, hm, n) \ - { .type = (t), \ - .u = { .p = { .name = (n), .a = (h), .m = (hm) } } } - -static const struct lcd_segment_map { - char type; - union { - struct pictogram_map { - u8 a,m; - char name[10]; - } p; - struct segment_map { - u8 a,m; - } s[7]; - } u; -} lcdMap[] = { -#include "yealink.h" -}; - -struct yealink_dev { - struct input_dev *idev; /* input device */ - struct usb_device *udev; /* usb device */ - - /* irq input channel */ - struct yld_ctl_packet *irq_data; - dma_addr_t irq_dma; - struct urb *urb_irq; - - /* control output channel */ - struct yld_ctl_packet *ctl_data; - dma_addr_t ctl_dma; - struct usb_ctrlrequest *ctl_req; - dma_addr_t ctl_req_dma; - struct urb *urb_ctl; - - char phys[64]; /* physical device path */ - - u8 lcdMap[ARRAY_SIZE(lcdMap)]; /* state of LCD, LED ... */ - int key_code; /* last reported key */ - - int stat_ix; - union { - struct yld_status s; - u8 b[sizeof(struct yld_status)]; - } master, copy; -}; - - -/******************************************************************************* - * Yealink lcd interface - ******************************************************************************/ - -/* - * Register a default 7 segment character set - */ -static SEG7_DEFAULT_MAP(map_seg7); - - /* Display a char, - * char '\9' and '\n' are placeholders and do not overwrite the original text. - * A space will always hide an icon. - */ -static int setChar(struct yealink_dev *yld, int el, int chr) -{ - int i, a, m, val; - - if (el >= ARRAY_SIZE(lcdMap)) - return -EINVAL; - - if (chr == '\t' || chr == '\n') - return 0; - - yld->lcdMap[el] = chr; - - if (lcdMap[el].type == '.') { - a = lcdMap[el].u.p.a; - m = lcdMap[el].u.p.m; - if (chr != ' ') - yld->master.b[a] |= m; - else - yld->master.b[a] &= ~m; - return 0; - } - - val = map_to_seg7(&map_seg7, chr); - for (i = 0; i < ARRAY_SIZE(lcdMap[0].u.s); i++) { - m = lcdMap[el].u.s[i].m; - - if (m == 0) - continue; - - a = lcdMap[el].u.s[i].a; - if (val & 1) - yld->master.b[a] |= m; - else - yld->master.b[a] &= ~m; - val = val >> 1; - } - return 0; -}; - -/******************************************************************************* - * Yealink key interface - ******************************************************************************/ - -/* Map device buttons to internal key events. - * - * USB-P1K button layout: - * - * up - * IN OUT - * down - * - * pickup C hangup - * 1 2 3 - * 4 5 6 - * 7 8 9 - * * 0 # - * - * The "up" and "down" keys, are symbolised by arrows on the button. - * The "pickup" and "hangup" keys are symbolised by a green and red phone - * on the button. - */ -static int map_p1k_to_key(int scancode) -{ - switch(scancode) { /* phone key: */ - case 0x23: return KEY_LEFT; /* IN */ - case 0x33: return KEY_UP; /* up */ - case 0x04: return KEY_RIGHT; /* OUT */ - case 0x24: return KEY_DOWN; /* down */ - case 0x03: return KEY_ENTER; /* pickup */ - case 0x14: return KEY_BACKSPACE; /* C */ - case 0x13: return KEY_ESC; /* hangup */ - case 0x00: return KEY_1; /* 1 */ - case 0x01: return KEY_2; /* 2 */ - case 0x02: return KEY_3; /* 3 */ - case 0x10: return KEY_4; /* 4 */ - case 0x11: return KEY_5; /* 5 */ - case 0x12: return KEY_6; /* 6 */ - case 0x20: return KEY_7; /* 7 */ - case 0x21: return KEY_8; /* 8 */ - case 0x22: return KEY_9; /* 9 */ - case 0x30: return KEY_KPASTERISK; /* * */ - case 0x31: return KEY_0; /* 0 */ - case 0x32: return KEY_LEFTSHIFT | - KEY_3 << 8; /* # */ - } - return -EINVAL; -} - -/* Completes a request by converting the data into events for the - * input subsystem. - * - * The key parameter can be cascaded: key2 << 8 | key1 - */ -static void report_key(struct yealink_dev *yld, int key) -{ - struct input_dev *idev = yld->idev; - - if (yld->key_code >= 0) { - /* old key up */ - input_report_key(idev, yld->key_code & 0xff, 0); - if (yld->key_code >> 8) - input_report_key(idev, yld->key_code >> 8, 0); - } - - yld->key_code = key; - if (key >= 0) { - /* new valid key */ - input_report_key(idev, key & 0xff, 1); - if (key >> 8) - input_report_key(idev, key >> 8, 1); - } - input_sync(idev); -} - -/******************************************************************************* - * Yealink usb communication interface - ******************************************************************************/ - -static int yealink_cmd(struct yealink_dev *yld, struct yld_ctl_packet *p) -{ - u8 *buf = (u8 *)p; - int i; - u8 sum = 0; - - for(i=0; isum = sum; - return usb_control_msg(yld->udev, - usb_sndctrlpipe(yld->udev, 0), - USB_REQ_SET_CONFIGURATION, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0x200, 3, - p, sizeof(*p), - USB_CTRL_SET_TIMEOUT); -} - -static u8 default_ringtone[] = { - 0xEF, /* volume [0-255] */ - 0xFB, 0x1E, 0x00, 0x0C, /* 1250 [hz], 12/100 [s] */ - 0xFC, 0x18, 0x00, 0x0C, /* 1000 [hz], 12/100 [s] */ - 0xFB, 0x1E, 0x00, 0x0C, - 0xFC, 0x18, 0x00, 0x0C, - 0xFB, 0x1E, 0x00, 0x0C, - 0xFC, 0x18, 0x00, 0x0C, - 0xFB, 0x1E, 0x00, 0x0C, - 0xFC, 0x18, 0x00, 0x0C, - 0xFF, 0xFF, 0x01, 0x90, /* silent, 400/100 [s] */ - 0x00, 0x00 /* end of sequence */ -}; - -static int yealink_set_ringtone(struct yealink_dev *yld, u8 *buf, size_t size) -{ - struct yld_ctl_packet *p = yld->ctl_data; - int ix, len; - - if (size <= 0) - return -EINVAL; - - /* Set the ringtone volume */ - memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); - yld->ctl_data->cmd = CMD_RING_VOLUME; - yld->ctl_data->size = 1; - yld->ctl_data->data[0] = buf[0]; - yealink_cmd(yld, p); - - buf++; - size--; - - p->cmd = CMD_RING_NOTE; - ix = 0; - while (size != ix) { - len = size - ix; - if (len > sizeof(p->data)) - len = sizeof(p->data); - p->size = len; - p->offset = cpu_to_be16(ix); - memcpy(p->data, &buf[ix], len); - yealink_cmd(yld, p); - ix += len; - } - return 0; -} - -/* keep stat_master & stat_copy in sync. - */ -static int yealink_do_idle_tasks(struct yealink_dev *yld) -{ - u8 val; - int i, ix, len; - - ix = yld->stat_ix; - - memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); - yld->ctl_data->cmd = CMD_KEYPRESS; - yld->ctl_data->size = 1; - yld->ctl_data->sum = 0xff - CMD_KEYPRESS; - - /* If state update pointer wraps do a KEYPRESS first. */ - if (ix >= sizeof(yld->master)) { - yld->stat_ix = 0; - return 0; - } - - /* find update candidates: copy != master */ - do { - val = yld->master.b[ix]; - if (val != yld->copy.b[ix]) - goto send_update; - } while (++ix < sizeof(yld->master)); - - /* nothing todo, wait a bit and poll for a KEYPRESS */ - yld->stat_ix = 0; - /* TODO how can we wait abit. ?? - * msleep_interruptible(1000 / YEALINK_POLLING_FREQUENCY); - */ - return 0; - -send_update: - - /* Setup an appropriate update request */ - yld->copy.b[ix] = val; - yld->ctl_data->data[0] = val; - - switch(ix) { - case offsetof(struct yld_status, led): - yld->ctl_data->cmd = CMD_LED; - yld->ctl_data->sum = -1 - CMD_LED - val; - break; - case offsetof(struct yld_status, dialtone): - yld->ctl_data->cmd = CMD_DIALTONE; - yld->ctl_data->sum = -1 - CMD_DIALTONE - val; - break; - case offsetof(struct yld_status, ringtone): - yld->ctl_data->cmd = CMD_RINGTONE; - yld->ctl_data->sum = -1 - CMD_RINGTONE - val; - break; - case offsetof(struct yld_status, keynum): - val--; - val &= 0x1f; - yld->ctl_data->cmd = CMD_SCANCODE; - yld->ctl_data->offset = cpu_to_be16(val); - yld->ctl_data->data[0] = 0; - yld->ctl_data->sum = -1 - CMD_SCANCODE - val; - break; - default: - len = sizeof(yld->master.s.lcd) - ix; - if (len > sizeof(yld->ctl_data->data)) - len = sizeof(yld->ctl_data->data); - - /* Combine up to consecutive LCD bytes in a singe request - */ - yld->ctl_data->cmd = CMD_LCD; - yld->ctl_data->offset = cpu_to_be16(ix); - yld->ctl_data->size = len; - yld->ctl_data->sum = -CMD_LCD - ix - val - len; - for(i=1; imaster.b[ix]; - yld->copy.b[ix] = val; - yld->ctl_data->data[i] = val; - yld->ctl_data->sum -= val; - } - } - yld->stat_ix = ix + 1; - return 1; -} - -/* Decide on how to handle responses - * - * The state transition diagram is somethhing like: - * - * syncState<--+ - * | | - * | idle - * \|/ | - * init --ok--> waitForKey --ok--> getKey - * ^ ^ | - * | +-------ok-------+ - * error,start - * - */ -static void urb_irq_callback(struct urb *urb) -{ - struct yealink_dev *yld = urb->context; - int ret; - - if (urb->status) - err("%s - urb status %d", __FUNCTION__, urb->status); - - switch (yld->irq_data->cmd) { - case CMD_KEYPRESS: - - yld->master.s.keynum = yld->irq_data->data[0]; - break; - - case CMD_SCANCODE: - dbg("get scancode %x", yld->irq_data->data[0]); - - report_key(yld, map_p1k_to_key(yld->irq_data->data[0])); - break; - - default: - err("unexpected response %x", yld->irq_data->cmd); - } - - yealink_do_idle_tasks(yld); - - ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); - if (ret) - err("%s - usb_submit_urb failed %d", __FUNCTION__, ret); -} - -static void urb_ctl_callback(struct urb *urb) -{ - struct yealink_dev *yld = urb->context; - int ret; - - if (urb->status) - err("%s - urb status %d", __FUNCTION__, urb->status); - - switch (yld->ctl_data->cmd) { - case CMD_KEYPRESS: - case CMD_SCANCODE: - /* ask for a response */ - ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC); - break; - default: - /* send new command */ - yealink_do_idle_tasks(yld); - ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC); - } - - if (ret) - err("%s - usb_submit_urb failed %d", __FUNCTION__, ret); -} - -/******************************************************************************* - * input event interface - ******************************************************************************/ - -/* TODO should we issue a ringtone on a SND_BELL event? -static int input_ev(struct input_dev *dev, unsigned int type, - unsigned int code, int value) -{ - - if (type != EV_SND) - return -EINVAL; - - switch (code) { - case SND_BELL: - case SND_TONE: - break; - default: - return -EINVAL; - } - - return 0; -} -*/ - -static int input_open(struct input_dev *dev) -{ - struct yealink_dev *yld = input_get_drvdata(dev); - int i, ret; - - dbg("%s", __FUNCTION__); - - /* force updates to device */ - for (i = 0; imaster); i++) - yld->copy.b[i] = ~yld->master.b[i]; - yld->key_code = -1; /* no keys pressed */ - - yealink_set_ringtone(yld, default_ringtone, sizeof(default_ringtone)); - - /* issue INIT */ - memset(yld->ctl_data, 0, sizeof(*(yld->ctl_data))); - yld->ctl_data->cmd = CMD_INIT; - yld->ctl_data->size = 10; - yld->ctl_data->sum = 0x100-CMD_INIT-10; - if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) { - dbg("%s - usb_submit_urb failed with result %d", - __FUNCTION__, ret); - return ret; - } - return 0; -} - -static void input_close(struct input_dev *dev) -{ - struct yealink_dev *yld = input_get_drvdata(dev); - - usb_kill_urb(yld->urb_ctl); - usb_kill_urb(yld->urb_irq); -} - -/******************************************************************************* - * sysfs interface - ******************************************************************************/ - -static DECLARE_RWSEM(sysfs_rwsema); - -/* Interface to the 7-segments translation table aka. char set. - */ -static ssize_t show_map(struct device *dev, struct device_attribute *attr, - char *buf) -{ - memcpy(buf, &map_seg7, sizeof(map_seg7)); - return sizeof(map_seg7); -} - -static ssize_t store_map(struct device *dev, struct device_attribute *attr, - const char *buf, size_t cnt) -{ - if (cnt != sizeof(map_seg7)) - return -EINVAL; - memcpy(&map_seg7, buf, sizeof(map_seg7)); - return sizeof(map_seg7); -} - -/* Interface to the LCD. - */ - -/* Reading /sys/../lineX will return the format string with its settings: - * - * Example: - * cat ./line3 - * 888888888888 - * Linux Rocks! - */ -static ssize_t show_line(struct device *dev, char *buf, int a, int b) -{ - struct yealink_dev *yld; - int i; - - down_read(&sysfs_rwsema); - yld = dev_get_drvdata(dev); - if (yld == NULL) { - up_read(&sysfs_rwsema); - return -ENODEV; - } - - for (i = a; i < b; i++) - *buf++ = lcdMap[i].type; - *buf++ = '\n'; - for (i = a; i < b; i++) - *buf++ = yld->lcdMap[i]; - *buf++ = '\n'; - *buf = 0; - - up_read(&sysfs_rwsema); - return 3 + ((b - a) << 1); -} - -static ssize_t show_line1(struct device *dev, struct device_attribute *attr, - char *buf) -{ - return show_line(dev, buf, LCD_LINE1_OFFSET, LCD_LINE2_OFFSET); -} - -static ssize_t show_line2(struct device *dev, struct device_attribute *attr, - char *buf) -{ - return show_line(dev, buf, LCD_LINE2_OFFSET, LCD_LINE3_OFFSET); -} - -static ssize_t show_line3(struct device *dev, struct device_attribute *attr, - char *buf) -{ - return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET); -} - -/* Writing to /sys/../lineX will set the coresponding LCD line. - * - Excess characters are ignored. - * - If less characters are written than allowed, the remaining digits are - * unchanged. - * - The '\n' or '\t' char is a placeholder, it does not overwrite the - * original content. - */ -static ssize_t store_line(struct device *dev, const char *buf, size_t count, - int el, size_t len) -{ - struct yealink_dev *yld; - int i; - - down_write(&sysfs_rwsema); - yld = dev_get_drvdata(dev); - if (yld == NULL) { - up_write(&sysfs_rwsema); - return -ENODEV; - } - - if (len > count) - len = count; - for (i = 0; i < len; i++) - setChar(yld, el++, buf[i]); - - up_write(&sysfs_rwsema); - return count; -} - -static ssize_t store_line1(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - return store_line(dev, buf, count, LCD_LINE1_OFFSET, LCD_LINE1_SIZE); -} - -static ssize_t store_line2(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - return store_line(dev, buf, count, LCD_LINE2_OFFSET, LCD_LINE2_SIZE); -} - -static ssize_t store_line3(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - return store_line(dev, buf, count, LCD_LINE3_OFFSET, LCD_LINE3_SIZE); -} - -/* Interface to visible and audible "icons", these include: - * pictures on the LCD, the LED, and the dialtone signal. - */ - -/* Get a list of "switchable elements" with their current state. */ -static ssize_t get_icons(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct yealink_dev *yld; - int i, ret = 1; - - down_read(&sysfs_rwsema); - yld = dev_get_drvdata(dev); - if (yld == NULL) { - up_read(&sysfs_rwsema); - return -ENODEV; - } - - for (i = 0; i < ARRAY_SIZE(lcdMap); i++) { - if (lcdMap[i].type != '.') - continue; - ret += sprintf(&buf[ret], "%s %s\n", - yld->lcdMap[i] == ' ' ? " " : "on", - lcdMap[i].u.p.name); - } - up_read(&sysfs_rwsema); - return ret; -} - -/* Change the visibility of a particular element. */ -static ssize_t set_icon(struct device *dev, const char *buf, size_t count, - int chr) -{ - struct yealink_dev *yld; - int i; - - down_write(&sysfs_rwsema); - yld = dev_get_drvdata(dev); - if (yld == NULL) { - up_write(&sysfs_rwsema); - return -ENODEV; - } - - for (i = 0; i < ARRAY_SIZE(lcdMap); i++) { - if (lcdMap[i].type != '.') - continue; - if (strncmp(buf, lcdMap[i].u.p.name, count) == 0) { - setChar(yld, i, chr); - break; - } - } - - up_write(&sysfs_rwsema); - return count; -} - -static ssize_t show_icon(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - return set_icon(dev, buf, count, buf[0]); -} - -static ssize_t hide_icon(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - return set_icon(dev, buf, count, ' '); -} - -/* Upload a ringtone to the device. - */ - -/* Stores raw ringtone data in the phone */ -static ssize_t store_ringtone(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct yealink_dev *yld; - - down_write(&sysfs_rwsema); - yld = dev_get_drvdata(dev); - if (yld == NULL) { - up_write(&sysfs_rwsema); - return -ENODEV; - } - - /* TODO locking with async usb control interface??? */ - yealink_set_ringtone(yld, (char *)buf, count); - up_write(&sysfs_rwsema); - return count; -} - -#define _M444 S_IRUGO -#define _M664 S_IRUGO|S_IWUSR|S_IWGRP -#define _M220 S_IWUSR|S_IWGRP - -static DEVICE_ATTR(map_seg7 , _M664, show_map , store_map ); -static DEVICE_ATTR(line1 , _M664, show_line1 , store_line1 ); -static DEVICE_ATTR(line2 , _M664, show_line2 , store_line2 ); -static DEVICE_ATTR(line3 , _M664, show_line3 , store_line3 ); -static DEVICE_ATTR(get_icons , _M444, get_icons , NULL ); -static DEVICE_ATTR(show_icon , _M220, NULL , show_icon ); -static DEVICE_ATTR(hide_icon , _M220, NULL , hide_icon ); -static DEVICE_ATTR(ringtone , _M220, NULL , store_ringtone); - -static struct attribute *yld_attributes[] = { - &dev_attr_line1.attr, - &dev_attr_line2.attr, - &dev_attr_line3.attr, - &dev_attr_get_icons.attr, - &dev_attr_show_icon.attr, - &dev_attr_hide_icon.attr, - &dev_attr_map_seg7.attr, - &dev_attr_ringtone.attr, - NULL -}; - -static struct attribute_group yld_attr_group = { - .attrs = yld_attributes -}; - -/******************************************************************************* - * Linux interface and usb initialisation - ******************************************************************************/ - -struct driver_info { - char *name; -}; - -static const struct driver_info info_P1K = { - .name = "Yealink usb-p1k", -}; - -static const struct usb_device_id usb_table [] = { - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | - USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x6993, - .idProduct = 0xb001, - .bInterfaceClass = USB_CLASS_HID, - .bInterfaceSubClass = 0, - .bInterfaceProtocol = 0, - .driver_info = (kernel_ulong_t)&info_P1K - }, - { } -}; - -static int usb_cleanup(struct yealink_dev *yld, int err) -{ - if (yld == NULL) - return err; - - usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */ - usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */ - - if (yld->idev) { - if (err) - input_free_device(yld->idev); - else - input_unregister_device(yld->idev); - } - - usb_free_urb(yld->urb_irq); - usb_free_urb(yld->urb_ctl); - - usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), - yld->ctl_req, yld->ctl_req_dma); - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->ctl_data, yld->ctl_dma); - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->irq_data, yld->irq_dma); - - kfree(yld); - return err; -} - -static void usb_disconnect(struct usb_interface *intf) -{ - struct yealink_dev *yld; - - down_write(&sysfs_rwsema); - yld = usb_get_intfdata(intf); - sysfs_remove_group(&intf->dev.kobj, &yld_attr_group); - usb_set_intfdata(intf, NULL); - up_write(&sysfs_rwsema); - - usb_cleanup(yld, 0); -} - -static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev (intf); - struct driver_info *nfo = (struct driver_info *)id->driver_info; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct yealink_dev *yld; - struct input_dev *input_dev; - int ret, pipe, i; - - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(endpoint)) - return -ENODEV; - - yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); - if (!yld) - return -ENOMEM; - - yld->udev = udev; - - yld->idev = input_dev = input_allocate_device(); - if (!input_dev) - return usb_cleanup(yld, -ENOMEM); - - /* allocate usb buffers */ - yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, - GFP_ATOMIC, &yld->irq_dma); - if (yld->irq_data == NULL) - return usb_cleanup(yld, -ENOMEM); - - yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN, - GFP_ATOMIC, &yld->ctl_dma); - if (!yld->ctl_data) - return usb_cleanup(yld, -ENOMEM); - - yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)), - GFP_ATOMIC, &yld->ctl_req_dma); - if (yld->ctl_req == NULL) - return usb_cleanup(yld, -ENOMEM); - - /* allocate urb structures */ - yld->urb_irq = usb_alloc_urb(0, GFP_KERNEL); - if (yld->urb_irq == NULL) - return usb_cleanup(yld, -ENOMEM); - - yld->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); - if (yld->urb_ctl == NULL) - return usb_cleanup(yld, -ENOMEM); - - /* get a handle to the interrupt data pipe */ - pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); - ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if (ret != USB_PKT_LEN) - err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN); - - /* initialise irq urb */ - usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data, - USB_PKT_LEN, - urb_irq_callback, - yld, endpoint->bInterval); - yld->urb_irq->transfer_dma = yld->irq_dma; - yld->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - yld->urb_irq->dev = udev; - - /* initialise ctl urb */ - yld->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | - USB_DIR_OUT; - yld->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; - yld->ctl_req->wValue = cpu_to_le16(0x200); - yld->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); - yld->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); - - usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0), - (void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN, - urb_ctl_callback, yld); - yld->urb_ctl->setup_dma = yld->ctl_req_dma; - yld->urb_ctl->transfer_dma = yld->ctl_dma; - yld->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP | - URB_NO_TRANSFER_DMA_MAP; - yld->urb_ctl->dev = udev; - - /* find out the physical bus location */ - usb_make_path(udev, yld->phys, sizeof(yld->phys)); - strlcat(yld->phys, "/input0", sizeof(yld->phys)); - - /* register settings for the input device */ - input_dev->name = nfo->name; - input_dev->phys = yld->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, yld); - - input_dev->open = input_open; - input_dev->close = input_close; - /* input_dev->event = input_ev; TODO */ - - /* register available key events */ - input_dev->evbit[0] = BIT(EV_KEY); - for (i = 0; i < 256; i++) { - int k = map_p1k_to_key(i); - if (k >= 0) { - set_bit(k & 0xff, input_dev->keybit); - if (k >> 8) - set_bit(k >> 8, input_dev->keybit); - } - } - - ret = input_register_device(yld->idev); - if (ret) - return usb_cleanup(yld, ret); - - usb_set_intfdata(intf, yld); - - /* clear visible elements */ - for (i = 0; i < ARRAY_SIZE(lcdMap); i++) - setChar(yld, i, ' '); - - /* display driver version on LCD line 3 */ - store_line3(&intf->dev, NULL, - DRIVER_VERSION, sizeof(DRIVER_VERSION)); - - /* Register sysfs hooks (don't care about failure) */ - ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group); - return 0; -} - -static struct usb_driver yealink_driver = { - .name = "yealink", - .probe = usb_probe, - .disconnect = usb_disconnect, - .id_table = usb_table, -}; - -static int __init yealink_dev_init(void) -{ - int ret = usb_register(&yealink_driver); - if (ret == 0) - info(DRIVER_DESC ":" DRIVER_VERSION); - return ret; -} - -static void __exit yealink_dev_exit(void) -{ - usb_deregister(&yealink_driver); -} - -module_init(yealink_dev_init); -module_exit(yealink_dev_exit); - -MODULE_DEVICE_TABLE (usb, usb_table); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/yealink.h b/drivers/usb/input/yealink.h deleted file mode 100644 index 48af0be..0000000 --- a/drivers/usb/input/yealink.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * drivers/usb/input/yealink.h - * - * Copyright (c) 2005 Henk Vergonet - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef INPUT_YEALINK_H -#define INPUT_YEALINK_H - -/* Using the control channel on interface 3 various aspects of the phone - * can be controlled like LCD, LED, dialtone and the ringtone. - */ - -struct yld_ctl_packet { - u8 cmd; /* command code, see below */ - u8 size; /* 1-11, size of used data bytes. */ - u16 offset; /* internal packet offset */ - u8 data[11]; - s8 sum; /* negative sum of 15 preceding bytes */ -} __attribute__ ((packed)); - -#define USB_PKT_LEN sizeof(struct yld_ctl_packet) - -/* The following yld_ctl_packet's are available: */ - -/* Init registers - * - * cmd 0x8e - * size 10 - * offset 0 - * data 0,0,0,0.... - */ -#define CMD_INIT 0x8e - -/* Request key scan - * - * cmd 0x80 - * size 1 - * offset 0 - * data[0] on return returns the key number, if it changes there's a new - * key pressed. - */ -#define CMD_KEYPRESS 0x80 - -/* Request scancode - * - * cmd 0x81 - * size 1 - * offset key number [0-1f] - * data[0] on return returns the scancode - */ -#define CMD_SCANCODE 0x81 - -/* Set LCD - * - * cmd 0x04 - * size 1-11 - * offset 0-23 - * data segment bits - */ -#define CMD_LCD 0x04 - -/* Set led - * - * cmd 0x05 - * size 1 - * offset 0 - * data[0] 0 OFF / 1 ON - */ -#define CMD_LED 0x05 - -/* Set ringtone volume - * - * cmd 0x11 - * size 1 - * offset 0 - * data[0] 0-0xff volume - */ -#define CMD_RING_VOLUME 0x11 - -/* Set ringtone notes - * - * cmd 0x02 - * size 1-11 - * offset 0-> - * data binary representation LE16(-freq), LE16(duration) .... - */ -#define CMD_RING_NOTE 0x02 - -/* Sound ringtone via the speaker on the back - * - * cmd 0x03 - * size 1 - * offset 0 - * data[0] 0 OFF / 0x24 ON - */ -#define CMD_RINGTONE 0x03 - -/* Sound dial tone via the ear speaker - * - * cmd 0x09 - * size 1 - * offset 0 - * data[0] 0 OFF / 1 ON - */ -#define CMD_DIALTONE 0x09 - -#endif /* INPUT_YEALINK_H */ - - -#if defined(_SEG) && defined(_PIC) -/* This table maps the LCD segments onto individual bit positions in the - * yld_status struct. - */ - -/* LCD, each segment must be driven seperately. - * - * Layout: - * - * |[] [][] [][] [][] in |[][] - * |[] M [][] D [][] : [][] out |[][] - * store - * - * NEW REP SU MO TU WE TH FR SA - * - * [] [] [] [] [] [] [] [] [] [] [] [] - * [] [] [] [] [] [] [] [] [] [] [] [] - */ - -/* Line 1 - * Format : 18.e8.M8.88...188 - * Icon names : M D : IN OUT STORE - */ -#define LCD_LINE1_OFFSET 0 -#define LCD_LINE1_SIZE 17 - -/* Note: first g then f => ! ! */ -/* _SEG( type a b c d e g f ) */ - _SEG('1', 0,0 , 22,2 , 22,2 , 0,0 , 0,0 , 0,0 , 0,0 ), - _SEG('8', 20,1 , 20,2 , 20,4 , 20,8 , 21,4 , 21,2 , 21,1 ), - _PIC('.', 22,1 , "M" ), - _SEG('e', 18,1 , 18,2 , 18,4 , 18,1 , 19,2 , 18,1 , 19,1 ), - _SEG('8', 16,1 , 16,2 , 16,4 , 16,8 , 17,4 , 17,2 , 17,1 ), - _PIC('.', 15,8 , "D" ), - _SEG('M', 14,1 , 14,2 , 14,4 , 14,1 , 15,4 , 15,2 , 15,1 ), - _SEG('8', 12,1 , 12,2 , 12,4 , 12,8 , 13,4 , 13,2 , 13,1 ), - _PIC('.', 11,8 , ":" ), - _SEG('8', 10,1 , 10,2 , 10,4 , 10,8 , 11,4 , 11,2 , 11,1 ), - _SEG('8', 8,1 , 8,2 , 8,4 , 8,8 , 9,4 , 9,2 , 9,1 ), - _PIC('.', 7,1 , "IN" ), - _PIC('.', 7,2 , "OUT" ), - _PIC('.', 7,4 , "STORE" ), - _SEG('1', 0,0 , 5,1 , 5,1 , 0,0 , 0,0 , 0,0 , 0,0 ), - _SEG('8', 4,1 , 4,2 , 4,4 , 4,8 , 5,8 , 5,4 , 5,2 ), - _SEG('8', 2,1 , 2,2 , 2,4 , 2,8 , 3,4 , 3,2 , 3,1 ), - -/* Line 2 - * Format : ......... - * Pict. name : NEW REP SU MO TU WE TH FR SA - */ -#define LCD_LINE2_OFFSET LCD_LINE1_OFFSET + LCD_LINE1_SIZE -#define LCD_LINE2_SIZE 9 - - _PIC('.', 23,2 , "NEW" ), - _PIC('.', 23,4 , "REP" ), - _PIC('.', 1,8 , "SU" ), - _PIC('.', 1,4 , "MO" ), - _PIC('.', 1,2 , "TU" ), - _PIC('.', 1,1 , "WE" ), - _PIC('.', 0,1 , "TH" ), - _PIC('.', 0,2 , "FR" ), - _PIC('.', 0,4 , "SA" ), - -/* Line 3 - * Format : 888888888888 - */ -#define LCD_LINE3_OFFSET LCD_LINE2_OFFSET + LCD_LINE2_SIZE -#define LCD_LINE3_SIZE 12 - - _SEG('8', 22,16, 22,32, 22,64, 22,128, 23,128, 23,64, 23,32 ), - _SEG('8', 20,16, 20,32, 20,64, 20,128, 21,128, 21,64, 21,32 ), - _SEG('8', 18,16, 18,32, 18,64, 18,128, 19,128, 19,64, 19,32 ), - _SEG('8', 16,16, 16,32, 16,64, 16,128, 17,128, 17,64, 17,32 ), - _SEG('8', 14,16, 14,32, 14,64, 14,128, 15,128, 15,64, 15,32 ), - _SEG('8', 12,16, 12,32, 12,64, 12,128, 13,128, 13,64, 13,32 ), - _SEG('8', 10,16, 10,32, 10,64, 10,128, 11,128, 11,64, 11,32 ), - _SEG('8', 8,16, 8,32, 8,64, 8,128, 9,128, 9,64, 9,32 ), - _SEG('8', 6,16, 6,32, 6,64, 6,128, 7,128, 7,64, 7,32 ), - _SEG('8', 4,16, 4,32, 4,64, 4,128, 5,128, 5,64, 5,32 ), - _SEG('8', 2,16, 2,32, 2,64, 2,128, 3,128, 3,64, 3,32 ), - _SEG('8', 0,16, 0,32, 0,64, 0,128, 1,128, 1,64, 1,32 ), - -/* Line 4 - * - * The LED, DIALTONE and RINGTONE are implemented as icons and use the same - * sysfs interface. - */ -#define LCD_LINE4_OFFSET LCD_LINE3_OFFSET + LCD_LINE3_SIZE - - _PIC('.', offsetof(struct yld_status, led) , 0x01, "LED" ), - _PIC('.', offsetof(struct yld_status, dialtone) , 0x01, "DIALTONE" ), - _PIC('.', offsetof(struct yld_status, ringtone) , 0x24, "RINGTONE" ), - -#undef _SEG -#undef _PIC -#endif /* _SEG && _PIC */ -- cgit v1.1