From 548c36e983f346621b5cb9ab031e4383e9996576 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 30 Jan 2008 22:04:05 -0800 Subject: sk98lin: remove obsolete driver All the hardware supported by this driver is now supported by the skge driver. The last remaining issue was support for ancient dual port SysKonnect fiber boards, and the skge driver now does these correctly (p.s. sk98lin was always broken on these old dual port boards anyway). Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 87 - drivers/net/Makefile | 1 - drivers/net/sk98lin/Makefile | 87 - drivers/net/sk98lin/h/lm80.h | 179 - drivers/net/sk98lin/h/skaddr.h | 285 -- drivers/net/sk98lin/h/skcsum.h | 213 - drivers/net/sk98lin/h/skdebug.h | 74 - drivers/net/sk98lin/h/skdrv1st.h | 188 - drivers/net/sk98lin/h/skdrv2nd.h | 447 -- drivers/net/sk98lin/h/skerror.h | 55 - drivers/net/sk98lin/h/skgedrv.h | 51 - drivers/net/sk98lin/h/skgehw.h | 2126 ---------- drivers/net/sk98lin/h/skgehwt.h | 48 - drivers/net/sk98lin/h/skgei2c.h | 210 - drivers/net/sk98lin/h/skgeinit.h | 797 ---- drivers/net/sk98lin/h/skgepnm2.h | 334 -- drivers/net/sk98lin/h/skgepnmi.h | 962 ----- drivers/net/sk98lin/h/skgesirq.h | 110 - drivers/net/sk98lin/h/ski2c.h | 174 - drivers/net/sk98lin/h/skqueue.h | 94 - drivers/net/sk98lin/h/skrlmt.h | 438 -- drivers/net/sk98lin/h/sktimer.h | 63 - drivers/net/sk98lin/h/sktypes.h | 69 - drivers/net/sk98lin/h/skversion.h | 38 - drivers/net/sk98lin/h/skvpd.h | 248 -- drivers/net/sk98lin/h/xmac_ii.h | 1579 ------- drivers/net/sk98lin/skaddr.c | 1788 -------- drivers/net/sk98lin/skdim.c | 742 ---- drivers/net/sk98lin/skethtool.c | 627 --- drivers/net/sk98lin/skge.c | 5218 ----------------------- drivers/net/sk98lin/skgehwt.c | 171 - drivers/net/sk98lin/skgeinit.c | 2005 --------- drivers/net/sk98lin/skgemib.c | 1075 ----- drivers/net/sk98lin/skgepnmi.c | 8198 ------------------------------------- drivers/net/sk98lin/skgesirq.c | 2229 ---------- drivers/net/sk98lin/ski2c.c | 1296 ------ drivers/net/sk98lin/sklm80.c | 141 - drivers/net/sk98lin/skqueue.c | 179 - drivers/net/sk98lin/skrlmt.c | 3257 --------------- drivers/net/sk98lin/sktimer.c | 250 -- drivers/net/sk98lin/skvpd.c | 1091 ----- drivers/net/sk98lin/skxmac2.c | 4160 ------------------- 42 files changed, 41384 deletions(-) delete mode 100644 drivers/net/sk98lin/Makefile delete mode 100644 drivers/net/sk98lin/h/lm80.h delete mode 100644 drivers/net/sk98lin/h/skaddr.h delete mode 100644 drivers/net/sk98lin/h/skcsum.h delete mode 100644 drivers/net/sk98lin/h/skdebug.h delete mode 100644 drivers/net/sk98lin/h/skdrv1st.h delete mode 100644 drivers/net/sk98lin/h/skdrv2nd.h delete mode 100644 drivers/net/sk98lin/h/skerror.h delete mode 100644 drivers/net/sk98lin/h/skgedrv.h delete mode 100644 drivers/net/sk98lin/h/skgehw.h delete mode 100644 drivers/net/sk98lin/h/skgehwt.h delete mode 100644 drivers/net/sk98lin/h/skgei2c.h delete mode 100644 drivers/net/sk98lin/h/skgeinit.h delete mode 100644 drivers/net/sk98lin/h/skgepnm2.h delete mode 100644 drivers/net/sk98lin/h/skgepnmi.h delete mode 100644 drivers/net/sk98lin/h/skgesirq.h delete mode 100644 drivers/net/sk98lin/h/ski2c.h delete mode 100644 drivers/net/sk98lin/h/skqueue.h delete mode 100644 drivers/net/sk98lin/h/skrlmt.h delete mode 100644 drivers/net/sk98lin/h/sktimer.h delete mode 100644 drivers/net/sk98lin/h/sktypes.h delete mode 100644 drivers/net/sk98lin/h/skversion.h delete mode 100644 drivers/net/sk98lin/h/skvpd.h delete mode 100644 drivers/net/sk98lin/h/xmac_ii.h delete mode 100644 drivers/net/sk98lin/skaddr.c delete mode 100644 drivers/net/sk98lin/skdim.c delete mode 100644 drivers/net/sk98lin/skethtool.c delete mode 100644 drivers/net/sk98lin/skge.c delete mode 100644 drivers/net/sk98lin/skgehwt.c delete mode 100644 drivers/net/sk98lin/skgeinit.c delete mode 100644 drivers/net/sk98lin/skgemib.c delete mode 100644 drivers/net/sk98lin/skgepnmi.c delete mode 100644 drivers/net/sk98lin/skgesirq.c delete mode 100644 drivers/net/sk98lin/ski2c.c delete mode 100644 drivers/net/sk98lin/sklm80.c delete mode 100644 drivers/net/sk98lin/skqueue.c delete mode 100644 drivers/net/sk98lin/skrlmt.c delete mode 100644 drivers/net/sk98lin/sktimer.c delete mode 100644 drivers/net/sk98lin/skvpd.c delete mode 100644 drivers/net/sk98lin/skxmac2.c (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fe7b5ec..978e72a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2220,93 +2220,6 @@ config SKY2_DEBUG If unsure, say N. -config SK98LIN - tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" - depends on PCI - ---help--- - Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx - compliant Gigabit Ethernet Adapter. - - This driver supports the original Yukon chipset. This driver is - deprecated and will be removed from the kernel in the near future, - it has been replaced by the skge driver. skge is cleaner and - seems to work better. - - This driver does not support the newer Yukon2 chipset. A separate - driver, sky2, is provided to support Yukon2-based adapters. - - The following adapters are supported by this driver: - - 3Com 3C940 Gigabit LOM Ethernet Adapter - - 3Com 3C941 Gigabit LOM Ethernet Adapter - - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter - - Allied Telesyn AT-2971T Gigabit Ethernet Adapter - - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 - - EG1032 v2 Instant Gigabit Network Adapter - - EG1064 v2 Instant Gigabit Network Adapter - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) - - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) - - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) - - Marvell RDK-8001 Adapter - - Marvell RDK-8002 Adapter - - Marvell RDK-8003 Adapter - - Marvell RDK-8004 Adapter - - Marvell RDK-8006 Adapter - - Marvell RDK-8007 Adapter - - Marvell RDK-8008 Adapter - - Marvell RDK-8009 Adapter - - Marvell RDK-8010 Adapter - - Marvell RDK-8011 Adapter - - Marvell RDK-8012 Adapter - - Marvell RDK-8052 Adapter - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) - - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) - - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) - - SK-9521 10/100/1000Base-T Adapter - - SK-9521 V2.0 10/100/1000Base-T Adapter - - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) - - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter - - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) - - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) - - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter - - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) - - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) - - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) - - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) - - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter - - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) - - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) - - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter - - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) - - SMC EZ Card 1000 (SMC9452TXV.2) - - The adapters support Jumbo Frames. - The dual link adapters support link-failover and dual port features. - Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support - the scatter-gather functionality with sendfile(). Please refer to - for more information about - optional driver parameters. - Questions concerning this driver may be addressed to: - - - If you want to compile this driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module will - be called sk98lin. This is recommended. - config VIA_VELOCITY tristate "VIA Velocity support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 3b1ea32..b8756eb 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -75,7 +75,6 @@ ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y) obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o -obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile deleted file mode 100644 index afd900d..0000000 --- a/drivers/net/sk98lin/Makefile +++ /dev/null @@ -1,87 +0,0 @@ -# -# Makefile for the SysKonnect SK-98xx device driver. -# - - -# -# Standalone driver params -# SKPARAM += -DSK_KERNEL_24 -# SKPARAM += -DSK_KERNEL_24_26 -# SKPARAM += -DSK_KERNEL_26 -# SKPARAM += -DSK_KERNEL_22_24 - -obj-$(CONFIG_SK98LIN) += sk98lin.o -sk98lin-objs := \ - skge.o \ - skethtool.o \ - skdim.o \ - skaddr.o \ - skgehwt.o \ - skgeinit.o \ - skgepnmi.o \ - skgesirq.o \ - ski2c.o \ - sklm80.o \ - skqueue.o \ - skrlmt.o \ - sktimer.o \ - skvpd.o \ - skxmac2.o - -# DBGDEF = \ -# -DDEBUG - -ifdef DEBUG -DBGDEF += \ --DSK_DEBUG_CHKMOD=0x00000000L \ --DSK_DEBUG_CHKCAT=0x00000000L -endif - - -# **** possible debug modules for SK_DEBUG_CHKMOD ***************** -# SK_DBGMOD_MERR 0x00000001L /* general module error indication */ -# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ -# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ -# SK_DBGMOD_VPD 0x00000008L /* VPD module */ -# SK_DBGMOD_I2C 0x00000010L /* I2C module */ -# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ -# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ -# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ -# SK_DBGMOD_DRV 0x00010000L /* DRV module */ - -# **** possible debug categories for SK_DEBUG_CHKCAT ************** -# *** common modules *** -# SK_DBGCAT_INIT 0x00000001L module/driver initialization -# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) -# SK_DBGCAT_ERR 0x00000004L error handling paths -# SK_DBGCAT_TX 0x00000008L transmit path -# SK_DBGCAT_RX 0x00000010L receive path -# SK_DBGCAT_IRQ 0x00000020L general IRQ handling -# SK_DBGCAT_QUEUE 0x00000040L any queue management -# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump -# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump - -# *** driver (file skge.c) *** -# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points -# SK_DBGCAT_DRV_??? 0x00020000 not used -# SK_DBGCAT_DRV_MCA 0x00040000 multicast -# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path -# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path -# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime -# SK_DBGCAT_DRV_??? 0x00400000 not used -# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode -# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames -# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions -# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources -# SK_DBGCAT_DRV_EVENT 0x08000000 driver events - -EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) - -clean: - rm -f core *.o *.a *.s - - - - - - diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h deleted file mode 100644 index 4e2dbbf..0000000 --- a/drivers/net/sk98lin/h/lm80.h +++ /dev/null @@ -1,179 +0,0 @@ -/****************************************************************************** - * - * Name: lm80.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.6 $ - * Date: $Date: 2003/05/13 17:26:52 $ - * Purpose: Contains all defines for the LM80 Chip - * (National Semiconductor). - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_LM80_H -#define __INC_LM80_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines ********************************************************************/ - -/* - * LM80 register definition - * - * All registers are 8 bit wide - */ -#define LM80_CFG 0x00 /* Configuration Register */ -#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ -#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ -#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ -#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ -#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ -#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ - /* 0x07 - 0x1f reserved */ - /* current values */ -#define LM80_VT0_IN 0x20 /* current Voltage 0 value */ -#define LM80_VT1_IN 0x21 /* current Voltage 1 value */ -#define LM80_VT2_IN 0x22 /* current Voltage 2 value */ -#define LM80_VT3_IN 0x23 /* current Voltage 3 value */ -#define LM80_VT4_IN 0x24 /* current Voltage 4 value */ -#define LM80_VT5_IN 0x25 /* current Voltage 5 value */ -#define LM80_VT6_IN 0x26 /* current Voltage 6 value */ -#define LM80_TEMP_IN 0x27 /* current Temperature value */ -#define LM80_FAN1_IN 0x28 /* current Fan 1 count */ -#define LM80_FAN2_IN 0x29 /* current Fan 2 count */ - /* limit values */ -#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ -#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ -#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ -#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ -#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ -#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ -#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ -#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ -#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ -#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ -#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ -#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ -#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ -#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ -#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ -#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ -#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ -#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ -#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ -#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ - /* 0x3e - 0x3f reserved */ - -/* - * LM80 bit definitions - */ - -/* LM80_CFG Configuration Register */ -#define LM80_CFG_START (1<<0) /* start monitoring operation */ -#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ -#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ -#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ -#define LM80_CFG_RESET (1<<4) /* signals a reset */ -#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ -#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ -#define LM80_CFG_INIT (1<<7) /* restore power on defaults */ - -/* LM80_ISRC_1 Interrupt Status Register 1 */ -/* LM80_IMSK_1 Interrupt Mask Register 1 */ -#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ -#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ -#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ -#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ -#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ -#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ -#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ -#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ - -/* LM80_ISRC_2 Interrupt Status Register 2 */ -/* LM80_IMSK_2 Interrupt Mask Register 2 */ -#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ -#define LM80_IS_BTI (1<<1) /* state of BTI# pin */ -#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ -#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ -#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ -#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ - /* bit 6 and 7 are reserved in LM80_ISRC_2 */ -#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ -#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ - -/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ -#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ -#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ -#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ -#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ -#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ -#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ - -/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ -#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ -#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ -#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ -#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ -#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ -#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ - - /* 0x07 - 0x1f reserved */ -/* LM80_VT0_IN current Voltage 0 value */ -/* LM80_VT1_IN current Voltage 1 value */ -/* LM80_VT2_IN current Voltage 2 value */ -/* LM80_VT3_IN current Voltage 3 value */ -/* LM80_VT4_IN current Voltage 4 value */ -/* LM80_VT5_IN current Voltage 5 value */ -/* LM80_VT6_IN current Voltage 6 value */ -/* LM80_TEMP_IN current temperature value */ -/* LM80_FAN1_IN current Fan 1 count */ -/* LM80_FAN2_IN current Fan 2 count */ -/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ -/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ -/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ -/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ -/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ -/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ -/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ -/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ -/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ -/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ -/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ -/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ -/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ -/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ -/* LM80_THOT_LIM_UP hot temperature limit (high) */ -/* LM80_THOT_LIM_LO hot temperature limit (low) */ -/* LM80_TOS_LIM_UP OS temperature limit (high) */ -/* LM80_TOS_LIM_LO OS temperature limit (low) */ -/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ -/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ - /* 0x3e - 0x3f reserved */ - -#define LM80_ADDR 0x28 /* LM80 default addr */ - -/* typedefs *******************************************************************/ - - -/* function prototypes ********************************************************/ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_LM80_H */ diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h deleted file mode 100644 index 423ad06..0000000 --- a/drivers/net/sk98lin/h/skaddr.h +++ /dev/null @@ -1,285 +0,0 @@ -/****************************************************************************** - * - * Name: skaddr.h - * Project: Gigabit Ethernet Adapters, ADDR-Modul - * Version: $Revision: 1.29 $ - * Date: $Date: 2003/05/13 16:57:24 $ - * Purpose: Header file for Address Management (MC, UC, Prom). - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This module is intended to manage multicast addresses and promiscuous mode - * on GEnesis adapters. - * - * Include File Hierarchy: - * - * "skdrv1st.h" - * ... - * "sktypes.h" - * "skqueue.h" - * "skaddr.h" - * ... - * "skdrv2nd.h" - * - ******************************************************************************/ - -#ifndef __INC_SKADDR_H -#define __INC_SKADDR_H - -#ifdef __cplusplus -extern "C" { -#endif /* cplusplus */ - -/* defines ********************************************************************/ - -#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */ -#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */ - -/* ----- Common return values ----- */ - -#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */ -#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */ -#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */ - -/* ----- Clear/Add flag bits ----- */ - -#define SK_ADDR_PERMANENT 1 /* RLMT Address */ - -/* ----- Additional Clear flag bits ----- */ - -#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */ - -/* ----- Override flag bits ----- */ - -#define SK_ADDR_LOGICAL_ADDRESS 0 -#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */ -#define SK_ADDR_PHYSICAL_ADDRESS 1 -#define SK_ADDR_CLEAR_LOGICAL 2 -#define SK_ADDR_SET_LOGICAL 4 - -/* ----- Override return values ----- */ - -#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS) -#define SK_ADDR_DUPLICATE_ADDRESS 1 -#define SK_ADDR_MULTICAST_ADDRESS 2 - -/* ----- Partitioning of excact match table ----- */ - -#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */ - -#define SK_ADDR_FIRST_MATCH_RLMT 1 -#define SK_ADDR_LAST_MATCH_RLMT 2 -#define SK_ADDR_FIRST_MATCH_DRV 3 -#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1) - -/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */ - -#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */ -#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */ - -/* ----- Additional SkAddrMcAdd return values ----- */ - -#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */ -#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */ -#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */ - -/* Promiscuous mode bits ----- */ - -#define SK_PROM_MODE_NONE 0 /* Normal receive. */ -#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */ -#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */ -/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */ - -/* Macros */ - -#ifdef OLD_STUFF -#ifndef SK_ADDR_EQUAL -/* - * "&" instead of "&&" allows better optimization on IA-64. - * The replacement is safe here, as all bytes exist. - */ -#ifndef SK_ADDR_DWORD_COMPARE -#define SK_ADDR_EQUAL(A1,A2) ( \ - (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ - (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ - (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ - (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ - (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ - (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0])) -#else /* SK_ADDR_DWORD_COMPARE */ -#define SK_ADDR_EQUAL(A1,A2) ( \ - (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \ - (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0]))) -#endif /* SK_ADDR_DWORD_COMPARE */ -#endif /* SK_ADDR_EQUAL */ -#endif /* 0 */ - -#ifndef SK_ADDR_EQUAL -#ifndef SK_ADDR_DWORD_COMPARE -#define SK_ADDR_EQUAL(A1,A2) ( \ - (((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \ - (((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \ - (((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \ - (((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \ - (((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \ - (((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0])) -#else /* SK_ADDR_DWORD_COMPARE */ -#define SK_ADDR_EQUAL(A1,A2) ( \ - (*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \ - *(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \ - (*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \ - *(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0]))) -#endif /* SK_ADDR_DWORD_COMPARE */ -#endif /* SK_ADDR_EQUAL */ - -/* typedefs *******************************************************************/ - -typedef struct s_MacAddr { - SK_U8 a[SK_MAC_ADDR_LEN]; -} SK_MAC_ADDR; - - -/* SK_FILTER is used to ensure alignment of the filter. */ -typedef union s_InexactFilter { - SK_U8 Bytes[8]; - SK_U64 Val; /* Dummy entry for alignment only. */ -} SK_FILTER64; - - -typedef struct s_AddrNet SK_ADDR_NET; - - -typedef struct s_AddrPort { - -/* ----- Public part (read-only) ----- */ - - SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */ - SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */ - int PromMode; /* Promiscuous Mode. */ - -/* ----- Private part ----- */ - - SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */ - SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ - SK_U8 Align01; - - SK_U32 FirstExactMatchRlmt; - SK_U32 NextExactMatchRlmt; - SK_U32 FirstExactMatchDrv; - SK_U32 NextExactMatchDrv; - SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES]; - SK_FILTER64 InexactFilter; /* For 64-bit hash register. */ - SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */ - SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */ -} SK_ADDR_PORT; - - -struct s_AddrNet { -/* ----- Public part (read-only) ----- */ - - SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */ - SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */ - -/* ----- Private part ----- */ - - SK_U32 ActivePort; /* View of module ADDR. */ - SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ - SK_U8 Align01; - SK_U16 Align02; -}; - - -typedef struct s_Addr { - -/* ----- Public part (read-only) ----- */ - - SK_ADDR_NET Net[SK_MAX_NETS]; - SK_ADDR_PORT Port[SK_MAX_MACS]; - -/* ----- Private part ----- */ -} SK_ADDR; - -/* function prototypes ********************************************************/ - -#ifndef SK_KR_PROTO - -/* Functions provided by SkAddr */ - -/* ANSI/C++ compliant function prototypes */ - -extern int SkAddrInit( - SK_AC *pAC, - SK_IOC IoC, - int Level); - -extern int SkAddrMcClear( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 PortNumber, - int Flags); - -extern int SkAddrMcAdd( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 PortNumber, - SK_MAC_ADDR *pMc, - int Flags); - -extern int SkAddrMcUpdate( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 PortNumber); - -extern int SkAddrOverride( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 PortNumber, - SK_MAC_ADDR SK_FAR *pNewAddr, - int Flags); - -extern int SkAddrPromiscuousChange( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 PortNumber, - int NewPromMode); - -#ifndef SK_SLIM -extern int SkAddrSwap( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 FromPortNumber, - SK_U32 ToPortNumber); -#endif - -#else /* defined(SK_KR_PROTO)) */ - -/* Non-ANSI/C++ compliant function prototypes */ - -#error KR-style prototypes are not yet provided. - -#endif /* defined(SK_KR_PROTO)) */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_SKADDR_H */ diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h deleted file mode 100644 index 6e256bd..0000000 --- a/drivers/net/sk98lin/h/skcsum.h +++ /dev/null @@ -1,213 +0,0 @@ -/****************************************************************************** - * - * Name: skcsum.h - * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx) - * Version: $Revision: 1.10 $ - * Date: $Date: 2003/08/20 13:59:57 $ - * Purpose: Store/verify Internet checksum in send/receive packets. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2001 SysKonnect GmbH. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * Public header file for the "GEnesis" common module "CSUM". - * - * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon" - * and is the code name of this SysKonnect project. - * - * Compilation Options: - * - * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an - * empty module. - * - * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id - * definitions. In this case, all SKCS_PROTO_xxx definitions must be made - * external. - * - * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status - * definitions. In this case, all SKCS_STATUS_xxx definitions must be made - * external. - * - * Include File Hierarchy: - * - * "h/skcsum.h" - * "h/sktypes.h" - * "h/skqueue.h" - * - ******************************************************************************/ - -#ifndef __INC_SKCSUM_H -#define __INC_SKCSUM_H - -#include "h/sktypes.h" -#include "h/skqueue.h" - -/* defines ********************************************************************/ - -/* - * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user - * overwrite. - */ -#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */ -#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */ -#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */ -#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */ - -/* Indices for protocol statistics. */ -#define SKCS_PROTO_STATS_IP 0 -#define SKCS_PROTO_STATS_UDP 1 -#define SKCS_PROTO_STATS_TCP 2 -#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */ -#endif /* !SKCS_OVERWRITE_PROTO */ - -/* - * Define the default SKCS_STATUS type and values if no user overwrite. - * - * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame. - * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error. - * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame. - * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame - * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok). - * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame). - * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok). - * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). - * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. - * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. - * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. - */ -#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */ -#define SKCS_STATUS int /* Define status type. */ - -#define SKCS_STATUS_UNKNOWN_IP_VERSION 1 -#define SKCS_STATUS_IP_CSUM_ERROR 2 -#define SKCS_STATUS_IP_FRAGMENT 3 -#define SKCS_STATUS_IP_CSUM_OK 4 -#define SKCS_STATUS_TCP_CSUM_ERROR 5 -#define SKCS_STATUS_UDP_CSUM_ERROR 6 -#define SKCS_STATUS_TCP_CSUM_OK 7 -#define SKCS_STATUS_UDP_CSUM_OK 8 -/* needed for Microsoft */ -#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9 -#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10 -/* UDP checksum may be omitted */ -#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11 -#endif /* !SKCS_OVERWRITE_STATUS */ - -/* Clear protocol statistics event. */ -#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1 - -/* - * Add two values in one's complement. - * - * Note: One of the two input values may be "longer" than 16-bit, but then the - * resulting sum may be 17 bits long. In this case, add zero to the result using - * SKCS_OC_ADD() again. - * - * Result = Value1 + Value2 - */ -#define SKCS_OC_ADD(Result, Value1, Value2) { \ - unsigned long Sum; \ - \ - Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \ - /* Add-in any carry. */ \ - (Result) = (Sum & 0xffff) + (Sum >> 16); \ -} - -/* - * Subtract two values in one's complement. - * - * Result = Value1 - Value2 - */ -#define SKCS_OC_SUB(Result, Value1, Value2) \ - SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff) - -/* typedefs *******************************************************************/ - -/* - * SKCS_PROTO_STATS - The CSUM protocol statistics structure. - * - * There is one instance of this structure for each protocol supported. - */ -typedef struct s_CsProtocolStatistics { - SK_U64 RxOkCts; /* Receive checksum ok. */ - SK_U64 RxUnableCts; /* Unable to verify receive checksum. */ - SK_U64 RxErrCts; /* Receive checksum error. */ - SK_U64 TxOkCts; /* Transmit checksum ok. */ - SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */ -} SKCS_PROTO_STATS; - -/* - * s_Csum - The CSUM module context structure. - */ -typedef struct s_Csum { - /* Enabled receive SK_PROTO_XXX bit flags. */ - unsigned ReceiveFlags[SK_MAX_NETS]; -#ifdef TX_CSUM - unsigned TransmitFlags[SK_MAX_NETS]; -#endif /* TX_CSUM */ - - /* The protocol statistics structure; one per supported protocol. */ - SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS]; -} SK_CSUM; - -/* - * SKCS_PACKET_INFO - The packet information structure. - */ -typedef struct s_CsPacketInfo { - /* Bit field specifiying the desired/found protocols. */ - unsigned ProtocolFlags; - - /* Length of complete IP header, including any option fields. */ - unsigned IpHeaderLength; - - /* IP header checksum. */ - unsigned IpHeaderChecksum; - - /* TCP/UDP pseudo header checksum. */ - unsigned PseudoHeaderChecksum; -} SKCS_PACKET_INFO; - -/* function prototypes ********************************************************/ - -#ifndef SK_CS_CALCULATE_CHECKSUM -extern unsigned SkCsCalculateChecksum( - void *pData, - unsigned Length); -#endif /* SK_CS_CALCULATE_CHECKSUM */ - -extern int SkCsEvent( - SK_AC *pAc, - SK_IOC Ioc, - SK_U32 Event, - SK_EVPARA Param); - -extern SKCS_STATUS SkCsGetReceiveInfo( - SK_AC *pAc, - void *pIpHeader, - unsigned Checksum1, - unsigned Checksum2, - int NetNumber); - -extern void SkCsSetReceiveFlags( - SK_AC *pAc, - unsigned ReceiveFlags, - unsigned *pChecksum1Offset, - unsigned *pChecksum2Offset, - int NetNumber); - -#endif /* __INC_SKCSUM_H */ diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h deleted file mode 100644 index 3cba171..0000000 --- a/drivers/net/sk98lin/h/skdebug.h +++ /dev/null @@ -1,74 +0,0 @@ -/****************************************************************************** - * - * Name: skdebug.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.14 $ - * Date: $Date: 2003/05/13 17:26:00 $ - * Purpose: SK specific DEBUG support - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_SKDEBUG_H -#define __INC_SKDEBUG_H - -#ifdef DEBUG -#ifndef SK_DBG_MSG -#define SK_DBG_MSG(pAC,comp,cat,arg) \ - if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ - ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ - SK_DBG_PRINTF arg ; \ - } -#endif -#else -#define SK_DBG_MSG(pAC,comp,lev,arg) -#endif - -/* PLS NOTE: - * ========= - * Due to any restrictions of kernel printf routines do not use other - * format identifiers as: %x %d %c %s . - * Never use any combined format identifiers such as: %lx %ld in your - * printf - argument (arg) because some OS specific kernel printfs may - * only support some basic identifiers. - */ - -/* Debug modules */ - -#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */ -#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ -#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ -#define SK_DBGMOD_VPD 0x00000008L /* VPD module */ -#define SK_DBGMOD_I2C 0x00000010L /* I2C module */ -#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ -#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ -#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ -#define SK_DBGMOD_PECP 0x00000100L /* PECP module */ -#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */ - -/* Debug events */ - -#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */ -#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */ -#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */ -#define SK_DBGCAT_TX 0x00000008L /* transmit path */ -#define SK_DBGCAT_RX 0x00000010L /* receive path */ -#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */ -#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */ -#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */ -#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */ - -#endif /* __INC_SKDEBUG_H */ diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h deleted file mode 100644 index 91b8d4f..0000000 --- a/drivers/net/sk98lin/h/skdrv1st.h +++ /dev/null @@ -1,188 +0,0 @@ -/****************************************************************************** - * - * Name: skdrv1st.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.4 $ - * Date: $Date: 2003/11/12 14:28:14 $ - * Purpose: First header file for driver and all other modules - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This is the first include file of the driver, which includes all - * neccessary system header files and some of the GEnesis header files. - * It also defines some basic items. - * - * Include File Hierarchy: - * - * see skge.c - * - ******************************************************************************/ - -#ifndef __INC_SKDRV1ST_H -#define __INC_SKDRV1ST_H - -typedef struct s_AC SK_AC; - -/* Set card versions */ -#define SK_FAR - -/* override some default functions with optimized linux functions */ - -#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2) -#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4) -#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8) -#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2) -#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),4) -#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),8) - -#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6)) - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define SK_CS_CALCULATE_CHECKSUM -#ifndef CONFIG_X86_64 -#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff) -#else -#define SkCsCalculateChecksum(p,l) ((~ip_fast_csum(p, l)) & 0xffff) -#endif - -#include "h/sktypes.h" -#include "h/skerror.h" -#include "h/skdebug.h" -#include "h/lm80.h" -#include "h/xmac_ii.h" - -#ifdef __LITTLE_ENDIAN -#define SK_LITTLE_ENDIAN -#else -#define SK_BIG_ENDIAN -#endif - -#define SK_NET_DEVICE net_device - - -/* we use gethrtime(), return unit: nanoseconds */ -#define SK_TICKS_PER_SEC 100 - -#define SK_MEM_MAPPED_IO - -// #define SK_RLMT_SLOW_LOOKAHEAD - -#define SK_MAX_MACS 2 -#define SK_MAX_NETS 2 - -#define SK_IOC char __iomem * - -typedef struct s_DrvRlmtMbuf SK_MBUF; - -#define SK_CONST64 INT64_C -#define SK_CONSTU64 UINT64_C - -#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size) -#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size) -#define SK_MEMSET(dest,val,size) memset(dest,val,size) -#define SK_STRLEN(pStr) strlen((char*)(pStr)) -#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size) -#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2)) - -/* macros to access the adapter */ -#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) -#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) -#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) -#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a))) -#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a))) -#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a))) - -#define int8_t char -#define int16_t short -#define int32_t long -#define int64_t long long -#define uint8_t u_char -#define uint16_t u_short -#define uint32_t u_long -#define uint64_t unsigned long long -#define t_scalar_t int -#define t_uscalar_t unsigned int -#define uintptr_t unsigned long - -#define __CONCAT__(A,B) A##B - -#define INT32_C(a) __CONCAT__(a,L) -#define INT64_C(a) __CONCAT__(a,LL) -#define UINT32_C(a) __CONCAT__(a,UL) -#define UINT64_C(a) __CONCAT__(a,ULL) - -#ifdef DEBUG -#define SK_DBG_PRINTF printk -#ifndef SK_DEBUG_CHKMOD -#define SK_DEBUG_CHKMOD 0 -#endif -#ifndef SK_DEBUG_CHKCAT -#define SK_DEBUG_CHKCAT 0 -#endif -/* those come from the makefile */ -#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD) -#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT) - -extern void SkDbgPrintf(const char *format,...); - -#define SK_DBGMOD_DRV 0x00010000 - -/**** possible driver debug categories ********************************/ -#define SK_DBGCAT_DRV_ENTRY 0x00010000 -#define SK_DBGCAT_DRV_SAP 0x00020000 -#define SK_DBGCAT_DRV_MCA 0x00040000 -#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 -#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 -#define SK_DBGCAT_DRV_PROGRESS 0x00200000 -#define SK_DBGCAT_DRV_MSG 0x00400000 -#define SK_DBGCAT_DRV_PROM 0x00800000 -#define SK_DBGCAT_DRV_TX_FRAME 0x01000000 -#define SK_DBGCAT_DRV_ERROR 0x02000000 -#define SK_DBGCAT_DRV_INT_SRC 0x04000000 -#define SK_DBGCAT_DRV_EVENT 0x08000000 - -#endif - -#define SK_ERR_LOG SkErrorLog - -extern void SkErrorLog(SK_AC*, int, int, char*); - -#endif - diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h deleted file mode 100644 index 3fa6717..0000000 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ /dev/null @@ -1,447 +0,0 @@ -/****************************************************************************** - * - * Name: skdrv2nd.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.10 $ - * Date: $Date: 2003/12/11 16:04:45 $ - * Purpose: Second header file for driver and all other modules - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This is the second include file of the driver, which includes all other - * neccessary files and defines all structures and constants used by the - * driver and the common modules. - * - * Include File Hierarchy: - * - * see skge.c - * - ******************************************************************************/ - -#ifndef __INC_SKDRV2ND_H -#define __INC_SKDRV2ND_H - -#include "h/skqueue.h" -#include "h/skgehwt.h" -#include "h/sktimer.h" -#include "h/ski2c.h" -#include "h/skgepnmi.h" -#include "h/skvpd.h" -#include "h/skgehw.h" -#include "h/skgeinit.h" -#include "h/skaddr.h" -#include "h/skgesirq.h" -#include "h/skcsum.h" -#include "h/skrlmt.h" -#include "h/skgedrv.h" - - -extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned); -extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*); -extern SK_U64 SkOsGetTime(SK_AC*); -extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); -extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); -extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); -extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); -extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); -extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); - -#ifdef SK_DIAG_SUPPORT -extern int SkDrvEnterDiagMode(SK_AC *pAc); -extern int SkDrvLeaveDiagMode(SK_AC *pAc); -#endif - -struct s_DrvRlmtMbuf { - SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */ - SK_U8 *pData; /* Data buffer (virtually contig.). */ - unsigned Size; /* Data buffer size. */ - unsigned Length; /* Length of packet (<= Size). */ - SK_U32 PortIdx; /* Receiving/transmitting port. */ -#ifdef SK_RLMT_MBUF_PRIVATE - SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */ -#endif /* SK_RLMT_MBUF_PRIVATE */ - struct sk_buff *pOs; /* Pointer to message block */ -}; - - -/* - * Time macros - */ -#if SK_TICKS_PER_SEC == 100 -#define SK_PNMI_HUNDREDS_SEC(t) (t) -#else -#define SK_PNMI_HUNDREDS_SEC(t) ((((unsigned long)t) * 100) / \ - (SK_TICKS_PER_SEC)) -#endif - -/* - * New SkOsGetTime - */ -#define SkOsGetTimeCurrent(pAC, pUsec) {\ - struct timeval t;\ - do_gettimeofday(&t);\ - *pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\ -} - - -/* - * ioctl definitions - */ -#define SK_IOCTL_BASE (SIOCDEVPRIVATE) -#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0) -#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1) -#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2) -#define SK_IOCTL_GEN (SK_IOCTL_BASE + 3) -#define SK_IOCTL_DIAG (SK_IOCTL_BASE + 4) - -typedef struct s_IOCTL SK_GE_IOCTL; - -struct s_IOCTL { - char __user * pData; - unsigned int Len; -}; - - -/* - * define sizes of descriptor rings in bytes - */ - -#define TX_RING_SIZE (8*1024) -#define RX_RING_SIZE (24*1024) - -/* - * Buffer size for ethernet packets - */ -#define ETH_BUF_SIZE 1540 -#define ETH_MAX_MTU 1514 -#define ETH_MIN_MTU 60 -#define ETH_MULTICAST_BIT 0x01 -#define SK_JUMBO_MTU 9000 - -/* - * transmit priority selects the queue: LOW=asynchron, HIGH=synchron - */ -#define TX_PRIO_LOW 0 -#define TX_PRIO_HIGH 1 - -/* - * alignment of rx/tx descriptors - */ -#define DESCR_ALIGN 64 - -/* - * definitions for pnmi. TODO - */ -#define SK_DRIVER_RESET(pAC, IoC) 0 -#define SK_DRIVER_SENDEVENT(pAC, IoC) 0 -#define SK_DRIVER_SELFTEST(pAC, IoC) 0 -/* For get mtu you must add an own function */ -#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0 -#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0 -#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0 - -/* -** Interim definition of SK_DRV_TIMER placed in this file until -** common modules have been finalized -*/ -#define SK_DRV_TIMER 11 -#define SK_DRV_MODERATION_TIMER 1 -#define SK_DRV_MODERATION_TIMER_LENGTH 1000000 /* 1 second */ -#define SK_DRV_RX_CLEANUP_TIMER 2 -#define SK_DRV_RX_CLEANUP_TIMER_LENGTH 1000000 /* 100 millisecs */ - -/* -** Definitions regarding transmitting frames -** any calculating any checksum. -*/ -#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6 -#define C_LEN_ETHERMAC_HEADER_SRC_ADDR 6 -#define C_LEN_ETHERMAC_HEADER_LENTYPE 2 -#define C_LEN_ETHERMAC_HEADER ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \ - (C_LEN_ETHERMAC_HEADER_SRC_ADDR) + \ - (C_LEN_ETHERMAC_HEADER_LENTYPE) ) - -#define C_LEN_ETHERMTU_MINSIZE 46 -#define C_LEN_ETHERMTU_MAXSIZE_STD 1500 -#define C_LEN_ETHERMTU_MAXSIZE_JUMBO 9000 - -#define C_LEN_ETHERNET_MINSIZE ( (C_LEN_ETHERMAC_HEADER) + \ - (C_LEN_ETHERMTU_MINSIZE) ) - -#define C_OFFSET_IPHEADER C_LEN_ETHERMAC_HEADER -#define C_OFFSET_IPHEADER_IPPROTO 9 -#define C_OFFSET_TCPHEADER_TCPCS 16 -#define C_OFFSET_UDPHEADER_UDPCS 6 - -#define C_OFFSET_IPPROTO ( (C_LEN_ETHERMAC_HEADER) + \ - (C_OFFSET_IPHEADER_IPPROTO) ) - -#define C_PROTO_ID_UDP 17 /* refer to RFC 790 or Stevens' */ -#define C_PROTO_ID_TCP 6 /* TCP/IP illustrated for details */ - -/* TX and RX descriptors *****************************************************/ - -typedef struct s_RxD RXD; /* the receive descriptor */ - -struct s_RxD { - volatile SK_U32 RBControl; /* Receive Buffer Control */ - SK_U32 VNextRxd; /* Next receive descriptor,low dword */ - SK_U32 VDataLow; /* Receive buffer Addr, low dword */ - SK_U32 VDataHigh; /* Receive buffer Addr, high dword */ - SK_U32 FrameStat; /* Receive Frame Status word */ - SK_U32 TimeStamp; /* Time stamp from XMAC */ - SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */ - SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */ - RXD *pNextRxd; /* Pointer to next Rxd */ - struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ -}; - -typedef struct s_TxD TXD; /* the transmit descriptor */ - -struct s_TxD { - volatile SK_U32 TBControl; /* Transmit Buffer Control */ - SK_U32 VNextTxd; /* Next transmit descriptor,low dword */ - SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */ - SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */ - SK_U32 FrameStat; /* Transmit Frame Status Word */ - SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */ - SK_U16 TcpSumSt; /* TCP Sum Start */ - SK_U16 TcpSumWr; /* TCP Sum Write */ - SK_U32 TcpReserved; /* not used */ - TXD *pNextTxd; /* Pointer to next Txd */ - struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ -}; - -/* Used interrupt bits in the interrupts source register *********************/ - -#define DRIVER_IRQS ((IS_IRQ_SW) | \ - (IS_R1_F) |(IS_R2_F) | \ - (IS_XS1_F) |(IS_XA1_F) | \ - (IS_XS2_F) |(IS_XA2_F)) - -#define SPECIAL_IRQS ((IS_HW_ERR) |(IS_I2C_READY) | \ - (IS_EXT_REG) |(IS_TIMINT) | \ - (IS_PA_TO_RX1) |(IS_PA_TO_RX2) | \ - (IS_PA_TO_TX1) |(IS_PA_TO_TX2) | \ - (IS_MAC1) |(IS_LNK_SYNC_M1)| \ - (IS_MAC2) |(IS_LNK_SYNC_M2)| \ - (IS_R1_C) |(IS_R2_C) | \ - (IS_XS1_C) |(IS_XA1_C) | \ - (IS_XS2_C) |(IS_XA2_C)) - -#define IRQ_MASK ((IS_IRQ_SW) | \ - (IS_R1_B) |(IS_R1_F) |(IS_R2_B) |(IS_R2_F) | \ - (IS_XS1_B) |(IS_XS1_F) |(IS_XA1_B)|(IS_XA1_F)| \ - (IS_XS2_B) |(IS_XS2_F) |(IS_XA2_B)|(IS_XA2_F)| \ - (IS_HW_ERR) |(IS_I2C_READY)| \ - (IS_EXT_REG) |(IS_TIMINT) | \ - (IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \ - (IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \ - (IS_MAC1) |(IS_MAC2) | \ - (IS_R1_C) |(IS_R2_C) | \ - (IS_XS1_C) |(IS_XA1_C) | \ - (IS_XS2_C) |(IS_XA2_C)) - -#define IRQ_HWE_MASK (IS_ERR_MSK) /* enable all HW irqs */ - -typedef struct s_DevNet DEV_NET; - -struct s_DevNet { - int PortNr; - int NetNr; - SK_AC *pAC; -}; - -typedef struct s_TxPort TX_PORT; - -struct s_TxPort { - /* the transmit descriptor rings */ - caddr_t pTxDescrRing; /* descriptor area memory */ - SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */ - TXD *pTxdRingHead; /* Head of Tx rings */ - TXD *pTxdRingTail; /* Tail of Tx rings */ - TXD *pTxdRingPrev; /* descriptor sent previously */ - int TxdRingFree; /* # of free entrys */ - spinlock_t TxDesRingLock; /* serialize descriptor accesses */ - SK_IOC HwAddr; /* bmu registers address */ - int PortIndex; /* index number of port (0 or 1) */ -}; - -typedef struct s_RxPort RX_PORT; - -struct s_RxPort { - /* the receive descriptor rings */ - caddr_t pRxDescrRing; /* descriptor area memory */ - SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */ - RXD *pRxdRingHead; /* Head of Rx rings */ - RXD *pRxdRingTail; /* Tail of Rx rings */ - RXD *pRxdRingPrev; /* descriptor given to BMU previously */ - int RxdRingFree; /* # of free entrys */ - int RxCsum; /* use receive checksum hardware */ - spinlock_t RxDesRingLock; /* serialize descriptor accesses */ - int RxFillLimit; /* limit for buffers in ring */ - SK_IOC HwAddr; /* bmu registers address */ - int PortIndex; /* index number of port (0 or 1) */ -}; - -/* Definitions needed for interrupt moderation *******************************/ - -#define IRQ_EOF_AS_TX ((IS_XA1_F) | (IS_XA2_F)) -#define IRQ_EOF_SY_TX ((IS_XS1_F) | (IS_XS2_F)) -#define IRQ_MASK_TX_ONLY ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX)) -#define IRQ_MASK_RX_ONLY ((IS_R1_F) | (IS_R2_F)) -#define IRQ_MASK_SP_ONLY (SPECIAL_IRQS) -#define IRQ_MASK_TX_RX ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY)) -#define IRQ_MASK_SP_RX ((SPECIAL_IRQS) | (IRQ_MASK_RX_ONLY)) -#define IRQ_MASK_SP_TX ((SPECIAL_IRQS) | (IRQ_MASK_TX_ONLY)) -#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS) | (IRQ_MASK_TX_RX)) - -#define C_INT_MOD_NONE 1 -#define C_INT_MOD_STATIC 2 -#define C_INT_MOD_DYNAMIC 4 - -#define C_CLK_FREQ_GENESIS 53215000 /* shorter: 53.125 MHz */ -#define C_CLK_FREQ_YUKON 78215000 /* shorter: 78.125 MHz */ - -#define C_INTS_PER_SEC_DEFAULT 2000 -#define C_INT_MOD_ENABLE_PERCENTAGE 50 /* if higher 50% enable */ -#define C_INT_MOD_DISABLE_PERCENTAGE 50 /* if lower 50% disable */ -#define C_INT_MOD_IPS_LOWER_RANGE 30 -#define C_INT_MOD_IPS_UPPER_RANGE 40000 - - -typedef struct s_DynIrqModInfo DIM_INFO; -struct s_DynIrqModInfo { - unsigned long PrevTimeVal; - unsigned int PrevSysLoad; - unsigned int PrevUsedTime; - unsigned int PrevTotalTime; - int PrevUsedDescrRatio; - int NbrProcessedDescr; - SK_U64 PrevPort0RxIntrCts; - SK_U64 PrevPort1RxIntrCts; - SK_U64 PrevPort0TxIntrCts; - SK_U64 PrevPort1TxIntrCts; - SK_BOOL ModJustEnabled; /* Moderation just enabled yes/no */ - - int MaxModIntsPerSec; /* Moderation Threshold */ - int MaxModIntsPerSecUpperLimit; /* Upper limit for DIM */ - int MaxModIntsPerSecLowerLimit; /* Lower limit for DIM */ - - long MaskIrqModeration; /* ModIrqType (eg. 'TxRx') */ - SK_BOOL DisplayStats; /* Stats yes/no */ - SK_BOOL AutoSizing; /* Resize DIM-timer on/off */ - int IntModTypeSelect; /* EnableIntMod (eg. 'dynamic') */ - - SK_TIMER ModTimer; /* just some timer */ -}; - -typedef struct s_PerStrm PER_STRM; - -#define SK_ALLOC_IRQ 0x00000001 - -#ifdef SK_DIAG_SUPPORT -#define DIAG_ACTIVE 1 -#define DIAG_NOTACTIVE 0 -#endif - -/**************************************************************************** - * Per board structure / Adapter Context structure: - * Allocated within attach(9e) and freed within detach(9e). - * Contains all 'per device' necessary handles, flags, locks etc.: - */ -struct s_AC { - SK_GEINIT GIni; /* GE init struct */ - SK_PNMI Pnmi; /* PNMI data struct */ - SK_VPD vpd; /* vpd data struct */ - SK_QUEUE Event; /* Event queue */ - SK_HWT Hwt; /* Hardware Timer control struct */ - SK_TIMCTRL Tim; /* Software Timer control struct */ - SK_I2C I2c; /* I2C relevant data structure */ - SK_ADDR Addr; /* for Address module */ - SK_CSUM Csum; /* for checksum module */ - SK_RLMT Rlmt; /* for rlmt module */ - spinlock_t SlowPathLock; /* Normal IRQ lock */ - struct timer_list BlinkTimer; /* for LED blinking */ - int LedsOn; - SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */ - int RlmtMode; /* link check mode to set */ - int RlmtNets; /* Number of nets */ - - SK_IOC IoBase; /* register set of adapter */ - int BoardLevel; /* level of active hw init (0-2) */ - - SK_U32 AllocFlag; /* flag allocation of resources */ - struct pci_dev *PciDev; /* for access to pci config space */ - struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ - - int RxBufSize; /* length of receive buffers */ - struct net_device_stats stats; /* linux 'netstat -i' statistics */ - int Index; /* internal board index number */ - - /* adapter RAM sizes for queues of active port */ - int RxQueueSize; /* memory used for receive queue */ - int TxSQueueSize; /* memory used for sync. tx queue */ - int TxAQueueSize; /* memory used for async. tx queue */ - - int PromiscCount; /* promiscuous mode counter */ - int AllMultiCount; /* allmulticast mode counter */ - int MulticCount; /* number of different MC */ - /* addresses for this board */ - /* (may be more than HW can)*/ - - int HWRevision; /* Hardware revision */ - int ActivePort; /* the active XMAC port */ - int MaxPorts; /* number of activated ports */ - int TxDescrPerRing; /* # of descriptors per tx ring */ - int RxDescrPerRing; /* # of descriptors per rx ring */ - - caddr_t pDescrMem; /* Pointer to the descriptor area */ - dma_addr_t pDescrMemDMA; /* PCI DMA address of area */ - - /* the port structures with descriptor rings */ - TX_PORT TxPort[SK_MAX_MACS][2]; - RX_PORT RxPort[SK_MAX_MACS]; - - SK_BOOL CheckQueue; /* check event queue soon */ - SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */ - DIM_INFO DynIrqModInfo; /* all data related to DIM */ - - /* Only for tests */ - int PortDown; - int ChipsetType; /* Chipset family type - * 0 == Genesis family support - * 1 == Yukon family support - */ -#ifdef SK_DIAG_SUPPORT - SK_U32 DiagModeActive; /* is diag active? */ - SK_BOOL DiagFlowCtrl; /* for control purposes */ - SK_PNMI_STRUCT_DATA PnmiBackup; /* backup structure for all Pnmi-Data */ - SK_BOOL WasIfUp[SK_MAX_MACS]; /* for OpenClose while - * DIAG is busy with NIC - */ -#endif - -}; - - -#endif /* __INC_SKDRV2ND_H */ - diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h deleted file mode 100644 index da062f7..0000000 --- a/drivers/net/sk98lin/h/skerror.h +++ /dev/null @@ -1,55 +0,0 @@ -/****************************************************************************** - * - * Name: skerror.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.7 $ - * Date: $Date: 2003/05/13 17:25:13 $ - * Purpose: SK specific Error log support - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef _INC_SKERROR_H_ -#define _INC_SKERROR_H_ - -/* - * Define Error Classes - */ -#define SK_ERRCL_OTHER (0) /* Other error */ -#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */ -#define SK_ERRCL_INIT (1L<<1) /* Initialization error */ -#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */ -#define SK_ERRCL_SW (1L<<3) /* Internal Software error */ -#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */ -#define SK_ERRCL_COMM (1L<<5) /* Communication error */ - - -/* - * Define Error Code Bases - */ -#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */ -#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */ -#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */ -#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */ -#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */ -#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */ -#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */ -#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */ -#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */ -#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */ -#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */ - -#endif /* _INC_SKERROR_H_ */ diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h deleted file mode 100644 index 44fd4c3..0000000 --- a/drivers/net/sk98lin/h/skgedrv.h +++ /dev/null @@ -1,51 +0,0 @@ -/****************************************************************************** - * - * Name: skgedrv.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.10 $ - * Date: $Date: 2003/07/04 12:25:01 $ - * Purpose: Interface with the driver - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_SKGEDRV_H_ -#define __INC_SKGEDRV_H_ - -/* defines ********************************************************************/ - -/* - * Define the driver events. - * Usually the events are defined by the destination module. - * In case of the driver we put the definition of the events here. - */ -#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ -#define SK_DRV_NET_UP 2 /* The net is operational */ -#define SK_DRV_NET_DOWN 3 /* The net is down */ -#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ -#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ -#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ -#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ -#define SK_DRV_PORT_FAIL 8 /* One port fails */ -#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ -#define SK_DRV_POWER_DOWN 10 /* Power down mode */ -#define SK_DRV_TIMER 11 /* Timer for free use */ -#ifdef SK_NO_RLMT -#define SK_DRV_LINK_UP 12 /* Link Up event for driver */ -#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */ -#endif -#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */ -#endif /* __INC_SKGEDRV_H_ */ diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h deleted file mode 100644 index f6282b7..0000000 --- a/drivers/net/sk98lin/h/skgehw.h +++ /dev/null @@ -1,2126 +0,0 @@ -/****************************************************************************** - * - * Name: skgehw.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.56 $ - * Date: $Date: 2003/09/23 09:01:00 $ - * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_SKGEHW_H -#define __INC_SKGEHW_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines ********************************************************************/ - -#define BIT_31 (1UL << 31) -#define BIT_30 (1L << 30) -#define BIT_29 (1L << 29) -#define BIT_28 (1L << 28) -#define BIT_27 (1L << 27) -#define BIT_26 (1L << 26) -#define BIT_25 (1L << 25) -#define BIT_24 (1L << 24) -#define BIT_23 (1L << 23) -#define BIT_22 (1L << 22) -#define BIT_21 (1L << 21) -#define BIT_20 (1L << 20) -#define BIT_19 (1L << 19) -#define BIT_18 (1L << 18) -#define BIT_17 (1L << 17) -#define BIT_16 (1L << 16) -#define BIT_15 (1L << 15) -#define BIT_14 (1L << 14) -#define BIT_13 (1L << 13) -#define BIT_12 (1L << 12) -#define BIT_11 (1L << 11) -#define BIT_10 (1L << 10) -#define BIT_9 (1L << 9) -#define BIT_8 (1L << 8) -#define BIT_7 (1L << 7) -#define BIT_6 (1L << 6) -#define BIT_5 (1L << 5) -#define BIT_4 (1L << 4) -#define BIT_3 (1L << 3) -#define BIT_2 (1L << 2) -#define BIT_1 (1L << 1) -#define BIT_0 1L - -#define BIT_15S (1U << 15) -#define BIT_14S (1 << 14) -#define BIT_13S (1 << 13) -#define BIT_12S (1 << 12) -#define BIT_11S (1 << 11) -#define BIT_10S (1 << 10) -#define BIT_9S (1 << 9) -#define BIT_8S (1 << 8) -#define BIT_7S (1 << 7) -#define BIT_6S (1 << 6) -#define BIT_5S (1 << 5) -#define BIT_4S (1 << 4) -#define BIT_3S (1 << 3) -#define BIT_2S (1 << 2) -#define BIT_1S (1 << 1) -#define BIT_0S 1 - -#define SHIFT31(x) ((x) << 31) -#define SHIFT30(x) ((x) << 30) -#define SHIFT29(x) ((x) << 29) -#define SHIFT28(x) ((x) << 28) -#define SHIFT27(x) ((x) << 27) -#define SHIFT26(x) ((x) << 26) -#define SHIFT25(x) ((x) << 25) -#define SHIFT24(x) ((x) << 24) -#define SHIFT23(x) ((x) << 23) -#define SHIFT22(x) ((x) << 22) -#define SHIFT21(x) ((x) << 21) -#define SHIFT20(x) ((x) << 20) -#define SHIFT19(x) ((x) << 19) -#define SHIFT18(x) ((x) << 18) -#define SHIFT17(x) ((x) << 17) -#define SHIFT16(x) ((x) << 16) -#define SHIFT15(x) ((x) << 15) -#define SHIFT14(x) ((x) << 14) -#define SHIFT13(x) ((x) << 13) -#define SHIFT12(x) ((x) << 12) -#define SHIFT11(x) ((x) << 11) -#define SHIFT10(x) ((x) << 10) -#define SHIFT9(x) ((x) << 9) -#define SHIFT8(x) ((x) << 8) -#define SHIFT7(x) ((x) << 7) -#define SHIFT6(x) ((x) << 6) -#define SHIFT5(x) ((x) << 5) -#define SHIFT4(x) ((x) << 4) -#define SHIFT3(x) ((x) << 3) -#define SHIFT2(x) ((x) << 2) -#define SHIFT1(x) ((x) << 1) -#define SHIFT0(x) ((x) << 0) - -/* - * Configuration Space header - * Since this module is used for different OS', those may be - * duplicate on some of them (e.g. Linux). But to keep the - * common source, we have to live with this... - */ -#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */ -#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */ -#define PCI_COMMAND 0x04 /* 16 bit Command */ -#define PCI_STATUS 0x06 /* 16 bit Status */ -#define PCI_REV_ID 0x08 /* 8 bit Revision ID */ -#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */ -#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */ -#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */ -#define PCI_HEADER_T 0x0e /* 8 bit Header Type */ -#define PCI_BIST 0x0f /* 8 bit Built-in selftest */ -#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ -#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ - /* Byte 0x18..0x2b: reserved */ -#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ -#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ -#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ -#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ - /* Byte 0x35..0x3b: reserved */ -#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ -#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ -#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ -#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ - /* Device Dependent Region */ -#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ -#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ - /* Power Management Region */ -#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ -#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ -#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ -#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ - /* Byte 0x4e: reserved */ -#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ - /* VPD Region */ -#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ -#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ -#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ -#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ - /* Byte 0x58..0x59: reserved */ -#define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */ - /* Byte 0x5c..0xff: reserved */ - -/* - * I2C Address (PCI Config) - * - * Note: The temperature and voltage sensors are relocated on a different - * I2C bus. - */ -#define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */ - -/* - * Define Bits and Values of the registers - */ -/* PCI_COMMAND 16 bit Command */ - /* Bit 15..11: reserved */ -#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */ -#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */ -#define PCI_SERREN BIT_8S /* SERR enable */ -#define PCI_ADSTEP BIT_7S /* Address Stepping */ -#define PCI_PERREN BIT_6S /* Parity Report Response enable */ -#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */ -#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */ -#define PCI_SCYCEN BIT_3S /* Special Cycle enable */ -#define PCI_BMEN BIT_2S /* Bus Master enable */ -#define PCI_MEMEN BIT_1S /* Memory Space Access enable */ -#define PCI_IOEN BIT_0S /* I/O Space Access enable */ - -#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\ - PCI_BMEN | PCI_MEMEN | PCI_IOEN) - -/* PCI_STATUS 16 bit Status */ -#define PCI_PERR BIT_15S /* Parity Error */ -#define PCI_SERR BIT_14S /* Signaled SERR */ -#define PCI_RMABORT BIT_13S /* Received Master Abort */ -#define PCI_RTABORT BIT_12S /* Received Target Abort */ - /* Bit 11: reserved */ -#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */ -#define PCI_DEV_FAST (0<<9) /* fast */ -#define PCI_DEV_MEDIUM (1<<9) /* medium */ -#define PCI_DEV_SLOW (2<<9) /* slow */ -#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */ -#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */ -#define PCI_UDF BIT_6S /* User Defined Features */ -#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */ -#define PCI_NEWCAP BIT_4S /* New cap. list implemented */ -#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */ - /* Bit 2.. 0: reserved */ - -#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\ - PCI_DATAPERR) - -/* PCI_CLASS_CODE 24 bit Class Code */ -/* Byte 2: Base Class (02) */ -/* Byte 1: SubClass (00) */ -/* Byte 0: Programming Interface (00) */ - -/* PCI_CACHE_LSZ 8 bit Cache Line Size */ -/* Possible values: 0,2,4,8,16,32,64,128 */ - -/* PCI_HEADER_T 8 bit Header Type */ -#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */ -#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */ - -/* PCI_BIST 8 bit Built-in selftest */ -/* Built-in Self test not supported (optional) */ - -/* PCI_BASE_1ST 32 bit 1st Base address */ -#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */ -#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */ -#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */ -#define PCI_PREFEN BIT_3 /* Prefetchable */ -#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */ -#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */ -#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */ -#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */ -#define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */ - -/* PCI_BASE_2ND 32 bit 2nd Base address */ -#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */ -#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */ - /* Bit 1: reserved */ -#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */ - -/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */ -#define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */ -#define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */ -#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */ - /* Bit 10.. 1: reserved */ -#define PCI_ROMEN BIT_0 /* Address Decode enable */ - -/* Device Dependent Region */ -/* PCI_OUR_REG_1 32 bit Our Register 1 */ - /* Bit 31..29: reserved */ -#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */ -#define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */ -#define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */ -#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */ -#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ -#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ -#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ - /* 1 = Map Flash to memory */ - /* 0 = Disable addr. dec */ -#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */ -#define PCI_PAGE_16 (0L<<20) /* 16 k pages */ -#define PCI_PAGE_32K (1L<<20) /* 32 k pages */ -#define PCI_PAGE_64K (2L<<20) /* 64 k pages */ -#define PCI_PAGE_128K (3L<<20) /* 128 k pages */ - /* Bit 19: reserved */ -#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */ -#define PCI_NOTAR BIT_15 /* No turnaround cycle */ -#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ -#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ -#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ -#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ -#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ -#define PCI_BURST_DIS BIT_9 /* Burst Disable */ -#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ -#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */ -#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ - - -/* PCI_OUR_REG_2 32 bit Our Register 2 */ -#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */ -#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */ -#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */ - /* Bit 13..12: reserved */ -#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ -#define PCI_PATCH_DIR_3 BIT_11 -#define PCI_PATCH_DIR_2 BIT_10 -#define PCI_PATCH_DIR_1 BIT_9 -#define PCI_PATCH_DIR_0 BIT_8 -#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */ -#define PCI_EXT_PATCH_3 BIT_7 -#define PCI_EXT_PATCH_2 BIT_6 -#define PCI_EXT_PATCH_1 BIT_5 -#define PCI_EXT_PATCH_0 BIT_4 -#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ -#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ - /* Bit 1: reserved */ -#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ - - -/* Power Management Region */ -/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */ -#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */ -#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */ -#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */ -#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */ -#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */ -#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */ -#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */ -#define PCI_PM_D1_SUP BIT_9S /* D1 Support */ - /* Bit 8.. 6: reserved */ -#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */ -#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */ -#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */ -#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */ - -/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */ -#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */ -#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */ -#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */ -#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */ - /* Bit 7.. 2: reserved */ -#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */ - -#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ -#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ -#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ -#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ - -/* VPD Region */ -/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ -#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */ -#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */ - -/* Control Register File (Address Map) */ - -/* - * Bank 0 - */ -#define B0_RAP 0x0000 /* 8 bit Register Address Port */ - /* 0x0001 - 0x0003: reserved */ -#define B0_CTST 0x0004 /* 16 bit Control/Status register */ -#define B0_LED 0x0006 /* 8 Bit LED register */ -#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ -#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ -#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ -#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ -#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ -#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */ - /* 0x001c: reserved */ - -/* B0 XMAC 1 registers (GENESIS only) */ -#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/ - /* 0x0022 - 0x0027: reserved */ -#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */ - /* 0x002a - 0x002f: reserved */ -#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */ - /* 0x0032 - 0x0033: reserved */ -#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */ - /* 0x0036 - 0x003f: reserved */ - -/* B0 XMAC 2 registers (GENESIS only) */ -#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/ - /* 0x0042 - 0x0047: reserved */ -#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */ - /* 0x004a - 0x004f: reserved */ -#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */ - /* 0x0052 - 0x0053: reserved */ -#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */ - /* 0x0056 - 0x005f: reserved */ - -/* BMU Control Status Registers */ -#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */ -#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */ -#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ -#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/ -#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ -#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/ - /* 0x0078 - 0x007f: reserved */ - -/* - * Bank 1 - * - completely empty (this is the RAP Block window) - * Note: if RAP = 1 this page is reserved - */ - -/* - * Bank 2 - */ -/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ -#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ - /* 0x0106 - 0x0107: reserved */ -#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ - /* 0x010e - 0x010f: reserved */ -#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ - /* 0x0116 - 0x0117: reserved */ -#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ -#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ -#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ -#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ - /* Eprom registers are currently of no use */ -#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ -#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ -#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */ -#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ -#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */ -#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */ - /* 0x0125 - 0x0127: reserved */ -#define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */ -#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */ - /* 0x012a - 0x012f: reserved */ -#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ -#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ -#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ -#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ - /* 0x013a - 0x013f: reserved */ -#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ -#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ -#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ -#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ -#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ -#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ - /* 0x0154 - 0x0157: reserved */ -#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ -#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ - /* 0x015a - 0x015b: reserved */ -#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ -#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ -#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ -#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ -#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ - -/* Blink Source Counter (GENESIS only) */ -#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */ -#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */ -#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */ -#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */ -#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */ - /* 0x017c - 0x017f: reserved */ - -/* - * Bank 3 - */ -/* RAM Random Registers */ -#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ -#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ -#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ - /* 0x018c - 0x018f: reserved */ - -/* RAM Interface Registers */ -/* - * The HW-Spec. calls this registers Timeout Value 0..11. But this names are - * not usable in SW. Please notice these are NOT real timeouts, these are - * the number of qWords transferred continuously. - */ -#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ -#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ -#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ -#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ -#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ -#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ -#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ -#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ -#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ -#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ -#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ -#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ -#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ - /* 0x019d - 0x019f: reserved */ -#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ -#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ - /* 0x01a3 - 0x01af: reserved */ - -/* MAC Arbiter Registers (GENESIS only) */ -/* these are the no. of qWord transferred continuously and NOT real timeouts */ -#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */ -#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */ -#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */ -#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */ -#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */ -#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */ -#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */ -#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */ -#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */ -#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */ - /* 0x01bc - 0x01bf: reserved */ -#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */ -#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */ -#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */ -#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */ -#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */ -#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */ -#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */ -#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */ -#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */ -#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */ - /* 0x01cc - 0x01cf: reserved */ - -/* Packet Arbiter Registers (GENESIS only) */ -/* these are real timeouts */ -#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */ - /* 0x01d2 - 0x01d3: reserved */ -#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */ - /* 0x01d6 - 0x01d7: reserved */ -#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */ - /* 0x01da - 0x01db: reserved */ -#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */ - /* 0x01de - 0x01df: reserved */ -#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */ - /* 0x01e2 - 0x01e3: reserved */ -#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */ - /* 0x01e6 - 0x01e7: reserved */ -#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */ - /* 0x01ea - 0x01eb: reserved */ -#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */ - /* 0x01ee - 0x01ef: reserved */ -#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */ -#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */ - /* 0x01f4 - 0x01ff: reserved */ - -/* - * Bank 4 - 5 - */ -/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ -#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ -#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ -#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ -#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ -#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ -#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ -#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ - /* 0x0213 - 0x027f: reserved */ - /* 0x0280 - 0x0292: MAC 2 */ - /* 0x0213 - 0x027f: reserved */ - -/* - * Bank 6 - */ -/* External registers (GENESIS only) */ -#define B6_EXT_REG 0x0300 - -/* - * Bank 7 - */ -/* This is a copy of the Configuration register file (lower half) */ -#define B7_CFG_SPC 0x0380 - -/* - * Bank 8 - 15 - */ -/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ -#define B8_Q_REGS 0x0400 - -/* Queue Register Offsets, use Q_ADDR() to access */ -#define Q_D 0x00 /* 8*32 bit Current Descriptor */ -#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ -#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */ -#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ -#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ -#define Q_BC 0x30 /* 32 bit Current Byte Counter */ -#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ -#define Q_F 0x38 /* 32 bit Flag Register */ -#define Q_T1 0x3c /* 32 bit Test Register 1 */ -#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ -#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ -#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ -#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ -#define Q_T2 0x40 /* 32 bit Test Register 2 */ -#define Q_T3 0x44 /* 32 bit Test Register 3 */ - /* 0x48 - 0x7f: reserved */ - -/* - * Bank 16 - 23 - */ -/* RAM Buffer Registers */ -#define B16_RAM_REGS 0x0800 - -/* RAM Buffer Register Offsets, use RB_ADDR() to access */ -#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ -#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ -#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ -#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ -#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */ -#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */ -#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ -#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ - /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ -#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ -#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ -#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ -#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ -#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */ - /* 0x2c - 0x7f: reserved */ - -/* - * Bank 24 - */ -/* - * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) - * use MR_ADDR() to access - */ -#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ -#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ - /* 0x0c08 - 0x0c0b: reserved */ -#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ -#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ -#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */ -#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/ -#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */ -#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */ -#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/ -#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */ -#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */ - /* 0x0c1f: reserved */ -#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */ -#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */ -#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */ -#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */ - /* 0x0c2a - 0x0c2f: reserved */ -#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */ -#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */ -#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */ -#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */ - /* 0x0c3a - 0x0c3b: reserved */ -#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */ - /* 0x0c3d - 0x0c3f: reserved */ - -/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */ -#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ -#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ -#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ -#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ -#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ - /* 0x0c54 - 0x0c5f: reserved */ -#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ - /* 0x0c64 - 0x0c67: reserved */ -#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ - /* 0x0c6c - 0x0c6f: reserved */ -#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ - /* 0x0c74 - 0x0c77: reserved */ -#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ - /* 0x0c7c - 0x0c7f: reserved */ - -/* - * Bank 25 - */ - /* 0x0c80 - 0x0cbf: MAC 2 */ - /* 0x0cc0 - 0x0cff: reserved */ - -/* - * Bank 26 - */ -/* - * Transmit MAC FIFO and Transmit LED Registers (GENESIS only), - * use MR_ADDR() to access - */ -#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ -#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ -#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ -#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ -#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ -#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */ -#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ -#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */ - /* 0x0c1b: reserved */ -#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ -#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */ -#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */ - /* 0x0d1f: reserved */ -#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */ -#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */ -#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */ -#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */ - /* 0x0d2a - 0x0d3f: reserved */ - -/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */ -#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ -#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ -#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ - /* 0x0d4c - 0x0d5f: reserved */ -#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ -#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ -#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ - /* 0x0d6c - 0x0d6f: reserved */ -#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ -#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ -#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ - /* 0x0d7c - 0x0d7f: reserved */ - -/* - * Bank 27 - */ - /* 0x0d80 - 0x0dbf: MAC 2 */ - /* 0x0daa - 0x0dff: reserved */ - -/* - * Bank 28 - */ -/* Descriptor Poll Timer Registers */ -#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ -#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ -#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ - /* 0x0e09: reserved */ -#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ - /* 0x0e0b: reserved */ - -/* Time Stamp Timer Registers (YUKON only) */ - /* 0x0e10: reserved */ -#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ -#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ - /* 0x0e19: reserved */ -#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ - /* 0x0e1b - 0x0e7f: reserved */ - -/* - * Bank 29 - */ - /* 0x0e80 - 0x0efc: reserved */ - -/* - * Bank 30 - */ -/* GMAC and GPHY Control Registers (YUKON only) */ -#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ -#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ -#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ - /* 0x0f09 - 0x0f0b: reserved */ -#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ - /* 0x0f0d - 0x0f0f: reserved */ -#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ - /* 0x0f14 - 0x0f1f: reserved */ - -/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ - -#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ - -#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ -#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ -#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ -#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ -#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ -#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */ - -/* use this macro to access above registers */ -#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs)) - - -/* WOL Pattern Length Registers (YUKON only) */ - -#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ -#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ - -/* WOL Pattern Counter Registers (YUKON only) */ - -#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ -#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ - /* 0x0f40 - 0x0f7f: reserved */ - -/* - * Bank 31 - */ -/* 0x0f80 - 0x0fff: reserved */ - -/* - * Bank 32 - 33 - */ -#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ - -/* - * Bank 0x22 - 0x3f - */ -/* 0x1100 - 0x1fff: reserved */ - -/* - * Bank 0x40 - 0x4f - */ -#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */ - -/* - * Bank 0x50 - 0x5f - */ - -#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ - -/* - * Bank 0x60 - 0x6f - */ -#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */ - -/* - * Bank 0x70 - 0x7f - */ -#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ - -/* - * Control Register Bit Definitions: - */ -/* B0_RAP 8 bit Register Address Port */ - /* Bit 7: reserved */ -#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */ - -/* B0_CTST 16 bit Control/Status register */ - /* Bit 15..14: reserved */ -#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */ -#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */ -#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */ -#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */ -#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */ -#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */ -#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */ -#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */ -#define CS_STOP_DONE BIT_5S /* Stop Master is finished */ -#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */ -#define CS_MRST_CLR BIT_3S /* Clear Master reset */ -#define CS_MRST_SET BIT_2S /* Set Master reset */ -#define CS_RST_CLR BIT_1S /* Clear Software reset */ -#define CS_RST_SET BIT_0S /* Set Software reset */ - -/* B0_LED 8 Bit LED register */ - /* Bit 7.. 2: reserved */ -#define LED_STAT_ON BIT_1S /* Status LED on */ -#define LED_STAT_OFF BIT_0S /* Status LED off */ - -/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ -#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ -#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ -#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ -#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ -#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ -#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ -#define PC_VCC_ON BIT_1 /* Switch VCC On */ -#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ - -/* B0_ISRC 32 bit Interrupt Source Register */ -/* B0_IMSK 32 bit Interrupt Mask Register */ -/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ -/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ -#define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */ -#define IS_HW_ERR BIT_31 /* Interrupt HW Error */ - /* Bit 30: reserved */ -#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ -#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */ -#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */ -#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */ -#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */ -#define IS_IRQ_SW BIT_24 /* SW forced IRQ */ -#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */ - /* IRQ from PHY (YUKON only) */ -#define IS_TIMINT BIT_22 /* IRQ from Timer */ -#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */ -#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */ -#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */ -#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */ -/* Receive Queue 1 */ -#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */ -#define IS_R1_F BIT_16 /* Q_R1 End of Frame */ -#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */ -/* Receive Queue 2 */ -#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */ -#define IS_R2_F BIT_13 /* Q_R2 End of Frame */ -#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */ -/* Synchronous Transmit Queue 1 */ -#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */ -#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */ -#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */ -/* Asynchronous Transmit Queue 1 */ -#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */ -#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */ -#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */ -/* Synchronous Transmit Queue 2 */ -#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */ -#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */ -#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */ -/* Asynchronous Transmit Queue 2 */ -#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */ -#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */ -#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */ - - -/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ -/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ -/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ -#define IS_ERR_MSK 0x00000fffL /* All Error bits */ - /* Bit 31..14: reserved */ -#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ -#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ -#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */ -#define IS_IRQ_STAT BIT_10 /* IRQ status exception */ -#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */ -#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */ -#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */ -#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */ -#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */ -#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */ -#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */ -#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */ -#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */ -#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */ - -/* B2_CONN_TYP 8 bit Connector type */ -/* B2_PMD_TYP 8 bit PMD type */ -/* Values of connector and PMD type comply to SysKonnect internal std */ - -/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ -#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */ - /* Bit 3.. 2: reserved */ -#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ -#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/ - -/* B2_CHIP_ID 8 bit Chip Identification Number */ -#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ -#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ -#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ -#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ - -#define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */ -#define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */ - -/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */ -#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */ - -/* B2_LD_CTRL 8 bit EPROM loader control register */ -/* Bits are currently reserved */ - -/* B2_LD_TEST 8 bit EPROM loader test register */ - /* Bit 7.. 4: reserved */ -#define LD_T_ON BIT_3S /* Loader Test mode on */ -#define LD_T_OFF BIT_2S /* Loader Test mode off */ -#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */ -#define LD_START BIT_0S /* Start loading FPROM */ - -/* - * Timer Section - */ -/* B2_TI_CTRL 8 bit Timer control */ -/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ - /* Bit 7.. 3: reserved */ -#define TIM_START BIT_2S /* Start Timer */ -#define TIM_STOP BIT_1S /* Stop Timer */ -#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */ - -/* B2_TI_TEST 8 Bit Timer Test */ -/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ -/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ - /* Bit 7.. 3: reserved */ -#define TIM_T_ON BIT_2S /* Test mode on */ -#define TIM_T_OFF BIT_1S /* Test mode off */ -#define TIM_T_STEP BIT_0S /* Test step */ - -/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ -/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ - /* Bit 31..24: reserved */ -#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */ - -/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ - /* Bit 7.. 2: reserved */ -#define DPT_START BIT_1S /* Start Descriptor Poll Timer */ -#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ - -/* B2_E_3 8 bit lower 4 bits used for HW self test result */ -#define B2_E3_RES_MASK 0x0f - -/* B2_TST_CTRL1 8 bit Test Control Register 1 */ -#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */ -#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */ -#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */ -#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */ -#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */ -#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */ -#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */ -#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */ - -/* B2_TST_CTRL2 8 bit Test Control Register 2 */ - /* Bit 7.. 4: reserved */ - /* force the following error on the next master read/write */ -#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */ -#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */ -#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */ -#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */ - -/* B2_GP_IO 32 bit General Purpose I/O Register */ - /* Bit 31..26: reserved */ -#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */ -#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */ -#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */ -#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */ -#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */ -#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */ -#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */ -#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */ -#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */ -#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */ - /* Bit 15..10: reserved */ -#define GP_IO_9 BIT_9 /* IO_9 pin */ -#define GP_IO_8 BIT_8 /* IO_8 pin */ -#define GP_IO_7 BIT_7 /* IO_7 pin */ -#define GP_IO_6 BIT_6 /* IO_6 pin */ -#define GP_IO_5 BIT_5 /* IO_5 pin */ -#define GP_IO_4 BIT_4 /* IO_4 pin */ -#define GP_IO_3 BIT_3 /* IO_3 pin */ -#define GP_IO_2 BIT_2 /* IO_2 pin */ -#define GP_IO_1 BIT_1 /* IO_1 pin */ -#define GP_IO_0 BIT_0 /* IO_0 pin */ - -/* B2_I2C_CTRL 32 bit I2C HW Control Register */ -#define I2C_FLAG BIT_31 /* Start read/write if WR */ -#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */ -#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */ - /* Bit 8.. 5: reserved */ -#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ -#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ -#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ -#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ -#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ -#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ -#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ -#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ -#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ -#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ -#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ - -/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ - /* Bit 31.. 1 reserved */ -#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ - -/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ - /* Bit 7.. 3: reserved */ -#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */ -#define I2C_DATA BIT_1S /* I2C Data Port */ -#define I2C_CLK BIT_0S /* I2C Clock Port */ - -/* - * I2C Address - */ -#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/ - - -/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ - /* Bit 7.. 2: reserved */ -#define BSC_START BIT_1S /* Start Blink Source Counter */ -#define BSC_STOP BIT_0S /* Stop Blink Source Counter */ - -/* B2_BSC_STAT 8 bit Blink Source Counter Status */ - /* Bit 7.. 1: reserved */ -#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */ - -/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ -#define BSC_T_ON BIT_2S /* Test mode on */ -#define BSC_T_OFF BIT_1S /* Test mode off */ -#define BSC_T_STEP BIT_0S /* Test step */ - - -/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ - /* Bit 31..19: reserved */ -#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ - -/* RAM Interface Registers */ -/* B3_RI_CTRL 16 bit RAM Iface Control Register */ - /* Bit 15..10: reserved */ -#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */ -#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/ - /* Bit 7.. 2: reserved */ -#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */ -#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */ - -/* B3_RI_TEST 8 bit RAM Iface Test Register */ - /* Bit 15.. 4: reserved */ -#define RI_T_EV BIT_3S /* Timeout Event occured */ -#define RI_T_ON BIT_2S /* Timeout Timer Test On */ -#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */ -#define RI_T_STEP BIT_0S /* Timeout Timer Step */ - -/* MAC Arbiter Registers */ -/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ - /* Bit 15.. 4: reserved */ -#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */ -#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */ -#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ -#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ - -/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ - /* Bit 15.. 8: reserved */ -#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */ -#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */ -#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */ -#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */ -#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */ -#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */ -#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */ -#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */ - -/* Packet Arbiter Registers */ -/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ - /* Bit 15..14: reserved */ -#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */ -#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */ -#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */ -#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */ -#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */ -#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */ -#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */ -#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */ -#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */ -#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */ -#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */ -#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */ -#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ -#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ - -#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ - PA_ENA_TO_TX1 | PA_ENA_TO_TX2) - -/* Rx/Tx Path related Arbiter Test Registers */ -/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ -/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ -/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ -/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ -#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */ -#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */ -#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */ -#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */ -#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */ -#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */ -#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */ -#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */ -#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */ -#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */ -#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */ -#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */ -#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */ -#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */ -#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */ -#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */ - - -/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ -/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ -/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ -/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ -/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ - /* Bit 31..24: reserved */ -#define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */ - -/* TXA_CTRL 8 bit Tx Arbiter Control Register */ -#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */ -#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */ -#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */ -#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */ -#define TXA_START_RC BIT_3S /* Start sync Rate Control */ -#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */ -#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */ -#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */ - -/* TXA_TEST 8 bit Tx Arbiter Test Register */ - /* Bit 7.. 6: reserved */ -#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */ -#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */ -#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */ -#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */ -#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */ -#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */ - -/* TXA_STAT 8 bit Tx Arbiter Status Register */ - /* Bit 7.. 1: reserved */ -#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */ - -/* Q_BC 32 bit Current Byte Counter */ - /* Bit 31..16: reserved */ -#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ - -/* BMU Control Status Registers */ -/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ -/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ -/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ -/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ -/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ -/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ -/* Q_CSR 32 bit BMU Control/Status Register */ - /* Bit 31..25: reserved */ -#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */ - /* Bit 23..22: reserved */ -#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */ -#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */ -#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */ -#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */ -#define CSR_HPI_RUN BIT_17 /* Release HPI SM */ -#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */ -#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */ -#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */ -#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */ -#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */ -#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */ -#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */ -#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */ -#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */ -#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */ -#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */ -#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */ -#define CSR_START BIT_4 /* Start Rx/Tx Queue */ -#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */ -#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */ -#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */ -#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */ - -#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ - CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ - CSR_TRANS_RST) -#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ - CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ - CSR_TRANS_RUN) - -/* Q_F 32 bit Flag Register */ - /* Bit 31..28: reserved */ -#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */ -#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ -#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ -#define F_WM_REACHED BIT_25 /* Watermark reached */ - /* reserved */ -#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ - /* Bit 15..11: reserved */ -#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ - -/* Q_T1 32 bit Test Register 1 */ -/* Holds four State Machine control Bytes */ -#define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */ -#define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */ -#define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */ -#define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */ - -/* Q_T1_TR 8 bit Test Register 1 Transfer SM */ -/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */ -/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */ -/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */ - -/* The control status byte of each machine looks like ... */ -#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */ -#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */ -#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */ -#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */ -#define SM_STEP BIT_0S /* Step the State Machine */ -/* The encoding of the states is not supported by the Diagnostics Tool */ - -/* Q_T2 32 bit Test Register 2 */ - /* Bit 31.. 8: reserved */ -#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */ -#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */ -#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */ -#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */ -#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */ -#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */ -#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */ -#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */ - -/* Q_T3 32 bit Test Register 3 */ - /* Bit 31.. 7: reserved */ -#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */ - /* Bit 3: reserved */ -#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */ - -/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ -/* RB_START 32 bit RAM Buffer Start Address */ -/* RB_END 32 bit RAM Buffer End Address */ -/* RB_WP 32 bit RAM Buffer Write Pointer */ -/* RB_RP 32 bit RAM Buffer Read Pointer */ -/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ -/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ -/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ -/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ -/* RB_PC 32 bit RAM Buffer Packet Counter */ -/* RB_LEV 32 bit RAM Buffer Level Register */ - /* Bit 31..19: reserved */ -#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ - -/* RB_TST2 8 bit RAM Buffer Test Register 2 */ - /* Bit 7.. 4: reserved */ -#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */ -#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */ -#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */ -#define RB_PC_INC BIT_0S /* Packet Counter Increm */ - -/* RB_TST1 8 bit RAM Buffer Test Register 1 */ - /* Bit 7: reserved */ -#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */ -#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */ -#define RB_WP_INC BIT_4S /* Write Pointer Increm */ - /* Bit 3: reserved */ -#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */ -#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */ -#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */ - -/* RB_CTRL 8 bit RAM Buffer Control Register */ - /* Bit 7.. 6: reserved */ -#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */ -#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */ -#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */ -#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */ -#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */ -#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */ - - -/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ - -/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ -/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ -/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ -/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ -/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ -/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ -/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ -/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ -/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ -/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ -/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */ - /* Bit 31.. 6: reserved */ -#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */ - -/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ - /* Bit 15..14: reserved */ -#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */ -#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */ -#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */ -#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */ -#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */ -#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */ -#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */ -#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */ -#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */ -#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */ -#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */ -#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */ -#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */ -#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */ - -#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT - -/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ -#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */ - /* Bit 14: reserved */ -#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */ -#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */ -/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */ -/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */ -/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */ -/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */ -#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */ -#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */ -/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */ -/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */ -#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */ -#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */ -#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */ -#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */ - -#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) - -/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ -/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ - /* Bit 7: reserved */ -#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */ -#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */ -#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */ -#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */ -#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */ -#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ -#define MFF_PC_INC BIT_0S /* Packet Counter Increment */ - -/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ -/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ - /* Bit 7: reserved */ -#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ -#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ -#define MFF_WP_INC BIT_4S /* Write Pointer Increm */ - /* Bit 3: reserved */ -#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */ -#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */ -#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */ - -/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ -/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ - /* Bit 7..4: reserved */ -#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */ -#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */ -#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */ -#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */ - - -/* Link LED Counter Registers (GENESIS only) */ - -/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ -/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ -/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ - /* Bit 7.. 3: reserved */ -#define LED_START BIT_2S /* Start Timer */ -#define LED_STOP BIT_1S /* Stop Timer */ -#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */ -#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ - -/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ -/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ -/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ - /* Bit 7.. 3: reserved */ -#define LED_T_ON BIT_2S /* LED Counter Test mode On */ -#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ -#define LED_T_STEP BIT_0S /* LED Counter Step */ - -/* LNK_LED_REG 8 bit Link LED Register */ - /* Bit 7.. 6: reserved */ -#define LED_BLK_ON BIT_5S /* Link LED Blinking On */ -#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ -#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */ -#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */ -#define LED_ON BIT_1S /* switch LED on */ -#define LED_OFF BIT_0S /* switch LED off */ - -/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ - -/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ -/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ -/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ -/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ -/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ -/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ -/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ -/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ -/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ -/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ -/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ -/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ -/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ -/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ - -/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ - /* Bits 31..15: reserved */ -#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ -#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ -#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ - /* Bit 11: reserved */ -#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ -#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ -#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ -#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ -#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ -#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ -#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ -#define GMF_OPER_ON BIT_3 /* Operational Mode On */ -#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ -#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ -#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ - -/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ - /* Bits 31..19: reserved */ -#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ -#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ -#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ - /* Bits 15..7: same as for RX_GMF_CTRL_T */ -#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ -#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ -#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ - /* Bits 3..0: same as for RX_GMF_CTRL_T */ - -#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) -#define GMF_TX_CTRL_DEF GMF_OPER_ON - -#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ - -/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ - /* Bit 7.. 3: reserved */ -#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */ -#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */ -#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */ - -/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ - /* Bits 31.. 8: reserved */ -#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ -#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ -#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ -#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ -#define GMC_PAUSE_ON BIT_3 /* Pause On */ -#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ -#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ -#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ - -/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ - /* Bits 31..29: reserved */ -#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ -#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */ -#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ -#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ -#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ -#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ -#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ -#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ -#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ -#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ -#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ -#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ -#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ -#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ -#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ -#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ -#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ -#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ -#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ -#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ -#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ - /* Bits 7..2: reserved */ -#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ -#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ - -#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \ - GPC_HWCFG_M_1 | GPC_HWCFG_M_0) - -#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \ - GPC_HWCFG_M_1 | GPC_HWCFG_M_0) - -#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \ - GPC_ANEG_1 | GPC_ANEG_0) - -/* forced speed and duplex mode (don't mix with other ANEG bits) */ -#define GPC_FRC10MBIT_HALF 0 -#define GPC_FRC10MBIT_FULL GPC_ANEG_0 -#define GPC_FRC100MBIT_HALF GPC_ANEG_1 -#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) - -/* auto-negotiation with limited advertised speeds */ -/* mix only with master/slave settings (for copper) */ -#define GPC_ADV_1000_HALF GPC_ANEG_2 -#define GPC_ADV_1000_FULL GPC_ANEG_3 -#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) - -/* master/slave settings */ -/* only for copper with 1000 Mbps */ -#define GPC_FORCE_MASTER 0 -#define GPC_FORCE_SLAVE GPC_ANEG_0 -#define GPC_PREF_MASTER GPC_ANEG_1 -#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) - -/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ -/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ -#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */ -#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */ -#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ -#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ -#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ -#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ - -#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \ - GM_IS_TX_FF_UR) - -/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ - /* Bits 15.. 2: reserved */ -#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */ -#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */ - - -/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ -#define WOL_CTL_LINK_CHG_OCC BIT_15S -#define WOL_CTL_MAGIC_PKT_OCC BIT_14S -#define WOL_CTL_PATTERN_OCC BIT_13S - -#define WOL_CTL_CLEAR_RESULT BIT_12S - -#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S -#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S -#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S -#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S -#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S -#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S - -#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S -#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S -#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S -#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S -#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S -#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S - -#define WOL_CTL_DEFAULT \ - (WOL_CTL_DIS_PME_ON_LINK_CHG | \ - WOL_CTL_DIS_PME_ON_PATTERN | \ - WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ - WOL_CTL_DIS_LINK_CHG_UNIT | \ - WOL_CTL_DIS_PATTERN_UNIT | \ - WOL_CTL_DIS_MAGIC_PKT_UNIT) - -/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ -#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) - -#define SK_NUM_WOL_PATTERN 7 -#define SK_PATTERN_PER_WORD 4 -#define SK_BITMASK_PATTERN 7 -#define SK_POW_PATTERN_LENGTH 128 - -#define WOL_LENGTH_MSK 0x7f -#define WOL_LENGTH_SHIFT 8 - - -/* Receive and Transmit Descriptors ******************************************/ - -/* Transmit Descriptor struct */ -typedef struct s_HwTxd { - SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */ - SK_U32 TxNext; /* Physical Address Pointer to the next TxD */ - SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */ - SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */ - SK_U32 TxStat; /* Transmit Frame Status Word */ -#ifndef SK_USE_REV_DESC - SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ - SK_U16 TxRes1; /* 16 bit reserved field */ - SK_U16 TxTcpWp; /* TCP Checksum Write Position */ - SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ -#else /* SK_USE_REV_DESC */ - SK_U16 TxRes1; /* 16 bit reserved field */ - SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ - SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ - SK_U16 TxTcpWp; /* TCP Checksum Write Position */ -#endif /* SK_USE_REV_DESC */ - SK_U32 TxRes2; /* 32 bit reserved field */ -} SK_HWTXD; - -/* Receive Descriptor struct */ -typedef struct s_HwRxd { - SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */ - SK_U32 RxNext; /* Physical Address Pointer to the next RxD */ - SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */ - SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */ - SK_U32 RxStat; /* Receive Frame Status Word */ - SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ -#ifndef SK_USE_REV_DESC - SK_U16 RxTcpSum1; /* TCP Checksum 1 */ - SK_U16 RxTcpSum2; /* TCP Checksum 2 */ - SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ - SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ -#else /* SK_USE_REV_DESC */ - SK_U16 RxTcpSum2; /* TCP Checksum 2 */ - SK_U16 RxTcpSum1; /* TCP Checksum 1 */ - SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ - SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ -#endif /* SK_USE_REV_DESC */ -} SK_HWRXD; - -/* - * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2) - * should set the define SK_USE_REV_DESC. - * Structures are 'normaly' not endianess dependent. But in - * this case the SK_U16 fields are bound to bit positions inside the - * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord. - * The bit positions inside a DWord are of course endianess dependent and - * swaps if the DWord is swapped by the hardware. - */ - - -/* Descriptor Bit Definition */ -/* TxCtrl Transmit Buffer Control Field */ -/* RxCtrl Receive Buffer Control Field */ -#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ -#define BMU_STF BIT_30 /* Start of Frame */ -#define BMU_EOF BIT_29 /* End of Frame */ -#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ -#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ -/* TxCtrl specific bits */ -#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ -#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ -#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ -/* RxCtrl specific bits */ -#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ -#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ -#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ - /* Bit 23..16: BMU Check Opcodes */ -#define BMU_CHECK (0x55L<<16) /* Default BMU check */ -#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */ -#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */ -#define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */ - -/* TxStat Transmit Frame Status Word */ -/* RxStat Receive Frame Status Word */ -/* - *Note: TxStat is reserved for ASIC loopback mode only - * - * The Bits of the Status words are defined in xmac_ii.h - * (see XMR_FS bits) - */ - -/* macros ********************************************************************/ - -/* Receive and Transmit Queues */ -#define Q_R1 0x0000 /* Receive Queue 1 */ -#define Q_R2 0x0080 /* Receive Queue 2 */ -#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ -#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ -#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ -#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ - -/* - * Macro Q_ADDR() - * - * Use this macro to access the Receive and Transmit Queue Registers. - * - * para: - * Queue Queue to access. - * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 - * Offs Queue register offset. - * Values: Q_D, Q_DA_L ... Q_T2, Q_T3 - * - * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal) - */ -#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) - -/* - * Macro RB_ADDR() - * - * Use this macro to access the RAM Buffer Registers. - * - * para: - * Queue Queue to access. - * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 - * Offs Queue register offset. - * Values: RB_START, RB_END ... RB_LEV, RB_CTRL - * - * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal) - */ -#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) - - -/* MAC Related Registers */ -#define MAC_1 0 /* belongs to the port near the slot */ -#define MAC_2 1 /* belongs to the port far away from the slot */ - -/* - * Macro MR_ADDR() - * - * Use this macro to access a MAC Related Registers inside the ASIC. - * - * para: - * Mac MAC to access. - * Values: MAC_1, MAC_2 - * Offs MAC register offset. - * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG, - * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST - * - * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal) - */ -#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) - -#ifdef SK_LITTLE_ENDIAN -#define XM_WORD_LO 0 -#define XM_WORD_HI 1 -#else /* !SK_LITTLE_ENDIAN */ -#define XM_WORD_LO 1 -#define XM_WORD_HI 0 -#endif /* !SK_LITTLE_ENDIAN */ - - -/* - * macros to access the XMAC (GENESIS only) - * - * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD) - * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD) - * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT) - * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT) - * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK) - * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK) - * XM_INHASH(), to read the XM_HSM_CHK register - * XM_OUTHASH() to write the XM_HSM_CHK register - * - * para: - * Mac XMAC to access values: MAC_1 or MAC_2 - * IoC I/O context needed for SK I/O macros - * Reg XMAC Register to read or write - * (p)Val Value or pointer to the value which should be read or written - * - * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value); - */ - -#define XMA(Mac, Reg) \ - ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1)) - -#define XM_IN16(IoC, Mac, Reg, pVal) \ - SK_IN16((IoC), XMA((Mac), (Reg)), (pVal)) - -#define XM_OUT16(IoC, Mac, Reg, Val) \ - SK_OUT16((IoC), XMA((Mac), (Reg)), (Val)) - -#define XM_IN32(IoC, Mac, Reg, pVal) { \ - SK_IN16((IoC), XMA((Mac), (Reg)), \ - (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ - SK_IN16((IoC), XMA((Mac), (Reg+2)), \ - (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ -} - -#define XM_OUT32(IoC, Mac, Reg, Val) { \ - SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ - SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\ -} - -/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */ - -#define XM_INADDR(IoC, Mac, Reg, pVal) { \ - SK_U16 Word; \ - SK_U8 *pByte; \ - pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ - SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ - pByte[0] = (SK_U8)(Word & 0x00ff); \ - pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ - pByte[2] = (SK_U8)(Word & 0x00ff); \ - pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ - pByte[4] = (SK_U8)(Word & 0x00ff); \ - pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ -} - -#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \ - SK_U8 SK_FAR *pByte; \ - pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ - SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ - (((SK_U16)(pByte[0]) & 0x00ff) | \ - (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ - SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ - (((SK_U16)(pByte[2]) & 0x00ff) | \ - (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ - SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ - (((SK_U16)(pByte[4]) & 0x00ff) | \ - (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ -} - -#define XM_INHASH(IoC, Mac, Reg, pVal) { \ - SK_U16 Word; \ - SK_U8 SK_FAR *pByte; \ - pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ - SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ - pByte[0] = (SK_U8)(Word & 0x00ff); \ - pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ - pByte[2] = (SK_U8)(Word & 0x00ff); \ - pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ - pByte[4] = (SK_U8)(Word & 0x00ff); \ - pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \ - pByte[6] = (SK_U8)(Word & 0x00ff); \ - pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ -} - -#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \ - SK_U8 SK_FAR *pByte; \ - pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ - SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ - (((SK_U16)(pByte[0]) & 0x00ff)| \ - (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ - SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ - (((SK_U16)(pByte[2]) & 0x00ff)| \ - (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ - SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ - (((SK_U16)(pByte[4]) & 0x00ff)| \ - (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ - SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \ - (((SK_U16)(pByte[6]) & 0x00ff)| \ - (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ -} - -/* - * macros to access the GMAC (YUKON only) - * - * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT) - * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL) - * GM_IN32(), to read a 32 bit register (e.g. GM_) - * GM_OUT32(), to write a 32 bit register (e.g. GM_) - * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L) - * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L) - * GM_INHASH(), to read the GM_MC_ADDR_H1 register - * GM_OUTHASH() to write the GM_MC_ADDR_H1 register - * - * para: - * Mac GMAC to access values: MAC_1 or MAC_2 - * IoC I/O context needed for SK I/O macros - * Reg GMAC Register to read or write - * (p)Val Value or pointer to the value which should be read or written - * - * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value); - */ - -#define GMA(Mac, Reg) \ - ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg)) - -#define GM_IN16(IoC, Mac, Reg, pVal) \ - SK_IN16((IoC), GMA((Mac), (Reg)), (pVal)) - -#define GM_OUT16(IoC, Mac, Reg, Val) \ - SK_OUT16((IoC), GMA((Mac), (Reg)), (Val)) - -#define GM_IN32(IoC, Mac, Reg, pVal) { \ - SK_IN16((IoC), GMA((Mac), (Reg)), \ - (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ - SK_IN16((IoC), GMA((Mac), (Reg+4)), \ - (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ -} - -#define GM_OUT32(IoC, Mac, Reg, Val) { \ - SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ - SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\ -} - -#define GM_INADDR(IoC, Mac, Reg, pVal) { \ - SK_U16 Word; \ - SK_U8 *pByte; \ - pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ - SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ - pByte[0] = (SK_U8)(Word & 0x00ff); \ - pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ - pByte[2] = (SK_U8)(Word & 0x00ff); \ - pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ - pByte[4] = (SK_U8)(Word & 0x00ff); \ - pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ -} - -#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \ - SK_U8 SK_FAR *pByte; \ - pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ - SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ - (((SK_U16)(pByte[0]) & 0x00ff) | \ - (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ - SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ - (((SK_U16)(pByte[2]) & 0x00ff) | \ - (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ - SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ - (((SK_U16)(pByte[4]) & 0x00ff) | \ - (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ -} - -#define GM_INHASH(IoC, Mac, Reg, pVal) { \ - SK_U16 Word; \ - SK_U8 *pByte; \ - pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ - SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ - pByte[0] = (SK_U8)(Word & 0x00ff); \ - pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ - pByte[2] = (SK_U8)(Word & 0x00ff); \ - pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ - pByte[4] = (SK_U8)(Word & 0x00ff); \ - pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ - SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \ - pByte[6] = (SK_U8)(Word & 0x00ff); \ - pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ -} - -#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \ - SK_U8 *pByte; \ - pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ - SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ - (((SK_U16)(pByte[0]) & 0x00ff)| \ - (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ - SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ - (((SK_U16)(pByte[2]) & 0x00ff)| \ - (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ - SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ - (((SK_U16)(pByte[4]) & 0x00ff)| \ - (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ - SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \ - (((SK_U16)(pByte[6]) & 0x00ff)| \ - (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ -} - -/* - * Different MAC Types - */ -#define SK_MAC_XMAC 0 /* Xaqti XMAC II */ -#define SK_MAC_GMAC 1 /* Marvell GMAC */ - -/* - * Different PHY Types - */ -#define SK_PHY_XMAC 0 /* integrated in XMAC II */ -#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */ -#define SK_PHY_LONE 2 /* Level One LXT1000 */ -#define SK_PHY_NAT 3 /* National DP83891 */ -#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */ -#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */ - -/* - * PHY addresses (bits 12..8 of PHY address reg) - */ -#define PHY_ADDR_XMAC (0<<8) -#define PHY_ADDR_BCOM (1<<8) -#define PHY_ADDR_LONE (3<<8) -#define PHY_ADDR_NAT (0<<8) - -/* GPHY address (bits 15..11 of SMI control reg) */ -#define PHY_ADDR_MARV 0 - -/* - * macros to access the PHY - * - * PHY_READ() read a 16 bit value from the PHY - * PHY_WRITE() write a 16 bit value to the PHY - * - * para: - * IoC I/O context needed for SK I/O macros - * pPort Pointer to port struct for PhyAddr - * Mac XMAC to access values: MAC_1 or MAC_2 - * PhyReg PHY Register to read or write - * (p)Val Value or pointer to the value which should be read or - * written. - * - * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); - * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never - * comes back. This is checked in DEBUG mode. - */ -#ifndef DEBUG -#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ - SK_U16 Mmu; \ - \ - XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ - XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ - XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ - } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ - XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - } \ -} -#else -#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ - SK_U16 Mmu; \ - int __i = 0; \ - \ - XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ - XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ - XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ - __i++; \ - if (__i > 100000) { \ - SK_DBG_PRINTF("*****************************\n"); \ - SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \ - SK_DBG_PRINTF("*****************************\n"); \ - break; \ - } \ - } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ - XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ - } \ -} -#endif /* DEBUG */ - -#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \ - SK_U16 Mmu; \ - \ - if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ - XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ - } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ - } \ - XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ - XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ - if ((pPort)->PhyType != SK_PHY_XMAC) { \ - do { \ - XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ - } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ - } \ -} - -/* - * Macro PCI_C() - * - * Use this macro to access PCI config register from the I/O space. - * - * para: - * Addr PCI configuration register to access. - * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG, - * - * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal); - */ -#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */ - -/* - * Macro SK_HW_ADDR(Base, Addr) - * - * Calculates the effective HW address - * - * para: - * Base I/O or memory base address - * Addr Address offset - * - * usage: May be used in SK_INxx and SK_OUTxx macros - * #define SK_IN8(pAC, Addr, pVal) ...\ - * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr))) - */ -#ifdef SK_MEM_MAPPED_IO -#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr)) -#else /* SK_MEM_MAPPED_IO */ -#define SK_HW_ADDR(Base, Addr) \ - ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0))) -#endif /* SK_MEM_MAPPED_IO */ - -#define SZ_LONG (sizeof(SK_U32)) - -/* - * Macro SK_HWAC_LINK_LED() - * - * Use this macro to set the link LED mode. - * para: - * pAC Pointer to adapter context struct - * IoC I/O context needed for SK I/O macros - * Port Port number - * Mode Mode to set for this LED - */ -#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \ - SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode); - - -/* typedefs *******************************************************************/ - - -/* function prototypes ********************************************************/ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_SKGEHW_H */ diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h deleted file mode 100644 index e6b0016..0000000 --- a/drivers/net/sk98lin/h/skgehwt.h +++ /dev/null @@ -1,48 +0,0 @@ -/****************************************************************************** - * - * Name: skhwt.h - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.7 $ - * Date: $Date: 2003/09/16 12:55:08 $ - * Purpose: Defines for the hardware timer functions - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * SKGEHWT.H contains all defines and types for the timer functions - */ - -#ifndef _SKGEHWT_H_ -#define _SKGEHWT_H_ - -/* - * SK Hardware Timer - * - needed wherever the HWT module is used - * - use in Adapters context name pAC->Hwt - */ -typedef struct s_Hwt { - SK_U32 TStart; /* HWT start */ - SK_U32 TStop; /* HWT stop */ - int TActive; /* HWT: flag : active/inactive */ -} SK_HWT; - -extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc); -extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time); -extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc); -extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc); -extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc); -#endif /* _SKGEHWT_H_ */ diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h deleted file mode 100644 index d9b6f6d..0000000 --- a/drivers/net/sk98lin/h/skgei2c.h +++ /dev/null @@ -1,210 +0,0 @@ -/****************************************************************************** - * - * Name: skgei2c.h - * Project: Gigabit Ethernet Adapters, TWSI-Module - * Version: $Revision: 1.25 $ - * Date: $Date: 2003/10/20 09:06:05 $ - * Purpose: Special defines for TWSI - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling - */ - -#ifndef _INC_SKGEI2C_H_ -#define _INC_SKGEI2C_H_ - -/* - * Macros to access the B2_I2C_CTRL - */ -#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \ - SK_OUT32(IoC, B2_I2C_CTRL,\ - (flag ? 0x80000000UL : 0x0L) | \ - (((SK_U32)reg << 16) & I2C_ADDR) | \ - (((SK_U32)dev << 9) & I2C_DEV_SEL) | \ - (dev_size & I2C_DEV_SIZE) | \ - ((burst << 4) & I2C_BURST_LEN)) - -#define SK_I2C_STOP(IoC) { \ - SK_U32 I2cCtrl; \ - SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \ - SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \ -} - -#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl) - -/* - * Macros to access the TWSI SW Registers - */ -#define SK_I2C_SET_BIT(IoC, SetBits) { \ - SK_U8 OrgBits; \ - SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ - SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \ -} - -#define SK_I2C_CLR_BIT(IoC, ClrBits) { \ - SK_U8 OrgBits; \ - SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ - SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \ -} - -#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw) - -/* - * define the possible sensor states - */ -#define SK_SEN_IDLE 0 /* Idle: sensor not read */ -#define SK_SEN_VALUE 1 /* Value Read cycle */ -#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */ - -/* - * Conversion factor to convert read Voltage sensor to milli Volt - * Conversion factor to convert read Temperature sensor to 10th degree Celsius - */ -#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */ -#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */ -#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */ - -/* - * formula: counter = (22500*60)/(rpm * divisor * pulses/2) - * assuming: 6500rpm, 4 pulses, divisor 1 - */ -#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2)) - -/* - * Define sensor management data - * Maximum is reached on Genesis copper dual port and Yukon-64 - * Board specific maximum is in pAC->I2c.MaxSens - */ -#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */ -#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */ - -/* - * To watch the state machine (SM) use the timer in two ways - * instead of one as hitherto - */ -#define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */ -#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ - -/* - * Defines for the individual thresholds - */ - -/* Temperature sensor */ -#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */ -#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */ -#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */ -#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ - -/* VCC which should be 5 V */ -#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ -#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ -#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ -#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ - -/* - * VIO may be 5 V or 3.3 V. Initialization takes two parts: - * 1. Initialize lowest lower limit and highest higher limit. - * 2. After the first value is read correct the upper or the lower limit to - * the appropriate C constant. - * - * Warning limits are +-5% of the exepected voltage. - * Error limits are +-10% of the expected voltage. - */ - -/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */ - -#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */ -#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */ - /* 5000 mVolt */ -#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */ -#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */ - -#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */ - -/* correction values for the second pass */ -#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */ -#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */ - /* 3300 mVolt */ -#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */ -#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */ - -/* - * VDD voltage - */ -#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */ -#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */ -#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */ -#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */ - -/* - * PHY PLL 3V3 voltage - */ -#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */ -#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */ -#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */ -#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */ - -/* - * VAUX (YUKON only) - */ -#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */ -#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */ -#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */ -#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */ -#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */ -#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */ - -/* - * PHY 2V5 voltage - */ -#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */ -#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */ -#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */ -#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */ - -/* - * ASIC Core 1V5 voltage (YUKON only) - */ -#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ -#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */ -#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */ -#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ - -/* - * FAN 1 speed - */ -/* assuming: 6500rpm +-15%, 4 pulses, - * warning at: 80 % - * error at: 70 % - * no upper limit - */ -#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ -#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ -#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ -#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ - -/* - * Some Voltages need dynamic thresholds - */ -#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */ -#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */ -#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */ - -extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); -#endif /* n_INC_SKGEI2C_H */ diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h deleted file mode 100644 index 143e635..0000000 --- a/drivers/net/sk98lin/h/skgeinit.h +++ /dev/null @@ -1,797 +0,0 @@ -/****************************************************************************** - * - * Name: skgeinit.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.83 $ - * Date: $Date: 2003/09/16 14:07:37 $ - * Purpose: Structures and prototypes for the GE Init Module - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_SKGEINIT_H_ -#define __INC_SKGEINIT_H_ - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines ********************************************************************/ - -#define SK_TEST_VAL 0x11335577UL - -/* modifying Link LED behaviour (used with SkGeLinkLED()) */ -#define SK_LNK_OFF LED_OFF -#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) -#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) -#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) -#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) - -/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ -#define SK_LED_OFF LED_OFF -#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) -#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) - -/* addressing LED Registers in SkGeXmitLED() */ -#define XMIT_LED_INI 0 -#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) -#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) -#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) - -/* parameter 'Mode' when calling SkGeXmitLED() */ -#define SK_LED_DIS 0 -#define SK_LED_ENA 1 -#define SK_LED_TST 2 - -/* Counter and Timer constants, for a host clock of 62.5 MHz */ -#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ -#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ - -#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ - -#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ - /* 215 ms at 78.12 MHz */ - -#define SK_FACT_62 100 /* is given in percent */ -#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ -#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ - -/* Timeout values */ -#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ -#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ -#define SK_PKT_TO_MAX 0xffff /* Maximum value */ -#define SK_RI_TO_53 36 /* RAM interface timeout */ - -#define SK_PHY_ACC_TO 600000 /* PHY access timeout */ - -/* RAM Buffer High Pause Threshold values */ -#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ -#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ -#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ - -#ifndef SK_BMU_RX_WM -#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ -#endif -#ifndef SK_BMU_TX_WM -#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ -#endif - -/* XMAC II Rx High Watermark */ -#define SK_XM_RX_HI_WM 0x05aa /* 1450 */ - -/* XMAC II Tx Threshold */ -#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ -#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ -#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ -#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ - -/* values for GIPortUsage */ -#define SK_RED_LINK 1 /* redundant link usage */ -#define SK_MUL_LINK 2 /* multiple link usage */ -#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ - -/* Minimum RAM Buffer Rx Queue Size */ -#define SK_MIN_RXQ_SIZE 16 /* 16 kB */ - -/* Minimum RAM Buffer Tx Queue Size */ -#define SK_MIN_TXQ_SIZE 16 /* 16 kB */ - -/* Queue Size units */ -#define QZ_UNITS 0x7 -#define QZ_STEP 8 - -/* Percentage of queue size from whole memory */ -/* 80 % for receive */ -#define RAM_QUOTA_RX 80L -/* 0% for sync transfer */ -#define RAM_QUOTA_SYNC 0L -/* the rest (20%) is taken for async transfer */ - -/* Get the rounded queue size in Bytes in 8k steps */ -#define ROUND_QUEUE_SIZE(SizeInBytes) \ - ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ - ~(QZ_STEP-1)) - -/* Get the rounded queue size in KBytes in 8k steps */ -#define ROUND_QUEUE_SIZE_KB(Kilobytes) \ - ROUND_QUEUE_SIZE((Kilobytes) * 1024L) - -/* Types of RAM Buffer Queues */ -#define SK_RX_SRAM_Q 1 /* small receive queue */ -#define SK_RX_BRAM_Q 2 /* big receive queue */ -#define SK_TX_RAM_Q 3 /* small or big transmit queue */ - -/* parameter 'Dir' when calling SkGeStopPort() */ -#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ -#define SK_STOP_RX 2 /* Stops the receive path */ -#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ - -/* parameter 'RstMode' when calling SkGeStopPort() */ -#define SK_SOFT_RST 1 /* perform a software reset */ -#define SK_HARD_RST 2 /* perform a hardware reset */ - -/* Init Levels */ -#define SK_INIT_DATA 0 /* Init level 0: init data structures */ -#define SK_INIT_IO 1 /* Init level 1: init with IOs */ -#define SK_INIT_RUN 2 /* Init level 2: init for run time */ - -/* Link Mode Parameter */ -#define SK_LMODE_HALF 1 /* Half Duplex Mode */ -#define SK_LMODE_FULL 2 /* Full Duplex Mode */ -#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ -#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ -#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ -#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ -#define SK_LMODE_INDETERMINATED 7 /* indeterminated */ - -/* Auto-negotiation timeout in 100ms granularity */ -#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ - -/* Auto-negotiation error codes */ -#define SK_AND_OK 0 /* no error */ -#define SK_AND_OTHER 1 /* other error than below */ -#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ - - -/* Link Speed Capabilities */ -#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ -#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ -#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ -#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ -#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ - -/* Link Speed Parameter */ -#define SK_LSPEED_AUTO 1 /* Automatic resolution */ -#define SK_LSPEED_10MBPS 2 /* 10 Mbps */ -#define SK_LSPEED_100MBPS 3 /* 100 Mbps */ -#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ -#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ - -/* Link Speed Current State */ -#define SK_LSPEED_STAT_UNKNOWN 1 -#define SK_LSPEED_STAT_10MBPS 2 -#define SK_LSPEED_STAT_100MBPS 3 -#define SK_LSPEED_STAT_1000MBPS 4 -#define SK_LSPEED_STAT_INDETERMINATED 5 - - -/* Link Capability Parameter */ -#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ -#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ -#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ -#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ -#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ - -/* Link Mode Current State */ -#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ -#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ -#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ -#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ -#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ -#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ - -/* Flow Control Mode Parameter (and capabilities) */ -#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ -#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ -#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ -#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or - * just the remote station may send PAUSE - */ -#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ - -/* Flow Control Status Parameter */ -#define SK_FLOW_STAT_NONE 1 /* No Flow Control */ -#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ -#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ -#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ -#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ - -/* Master/Slave Mode Capabilities */ -#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ -#define SK_MS_CAP_MASTER (1<<1) /* This station is master */ -#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ -#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ - -/* Set Master/Slave Mode Parameter (and capabilities) */ -#define SK_MS_MODE_AUTO 1 /* Automatic resolution */ -#define SK_MS_MODE_MASTER 2 /* This station is master */ -#define SK_MS_MODE_SLAVE 3 /* This station is slave */ -#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ - -/* Master/Slave Status Parameter */ -#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ -#define SK_MS_STAT_MASTER 2 /* This station is master */ -#define SK_MS_STAT_SLAVE 3 /* This station is slave */ -#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ -#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ - -/* parameter 'Mode' when calling SkXmSetRxCmd() */ -#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ -#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ -#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ -#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ -#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ -#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ -#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ -#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ -#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ -#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ - -/* parameter 'Para' when calling SkMacSetRxTxEn() */ -#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ -#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ -#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ -#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ -#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ -#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ - -/* States of PState */ -#define SK_PRT_RESET 0 /* the port is reset */ -#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ -#define SK_PRT_INIT 2 /* the port is initialized */ -#define SK_PRT_RUN 3 /* the port has an active link */ - -/* PHY power down modes */ -#define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */ -#define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */ -#define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */ -#define PHY_PM_ENERGY_DETECT 3 /* energy detect */ -#define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */ - -/* Default receive frame limit for Workaround of XMAC Errata */ -#define SK_DEF_RX_WA_LIM SK_CONSTU64(100) - -/* values for GILedBlinkCtrl (LED Blink Control) */ -#define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */ -#define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */ -#define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */ - -/* Link Partner Status */ -#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ -#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ -#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ - -/* Maximum Restarts before restart is ignored (3Com WA) */ -#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ - -/* Max. Auto-neg. timeouts before link detection in sense mode is reset */ -#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ - -/* structures *****************************************************************/ - -/* - * MAC specific functions - */ -typedef struct s_GeMacFunc { - int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); - int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, - SK_U16 StatAddr, SK_U32 SK_FAR *pVal); - int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); - int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, - SK_U16 IStatus, SK_U64 SK_FAR *pVal); -} SK_GEMACFUNC; - -/* - * Port Structure - */ -typedef struct s_GePort { -#ifndef SK_DIAG - SK_TIMER PWaTimer; /* Workaround Timer */ - SK_TIMER HalfDupChkTimer; -#endif /* SK_DIAG */ - SK_U32 PPrevShorts; /* Previous Short Counter checking */ - SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ - SK_U64 PPrevRx; /* Previous RxOk Counter checking */ - SK_U64 PRxLim; /* Previous RxOk Counter checking */ - SK_U64 LastOctets; /* For half duplex hang check */ - int PLinkResCt; /* Link Restart Counter */ - int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ - int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ - int PRxQSize; /* Port Rx Queue Size in kB */ - int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ - int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ - SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ - SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ - SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ - SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ - SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ - SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ - SK_U32 PRxOverCnt; /* Receive Overflow Counter */ - int PRxQOff; /* Rx Queue Address Offset */ - int PXsQOff; /* Synchronous Tx Queue Address Offset */ - int PXaQOff; /* Asynchronous Tx Queue Address Offset */ - int PhyType; /* PHY used on this port */ - int PState; /* Port status (reset, stop, init, run) */ - SK_U16 PhyId1; /* PHY Id1 on this port */ - SK_U16 PhyAddr; /* MDIO/MDC PHY address */ - SK_U16 PIsave; /* Saved Interrupt status word */ - SK_U16 PSsave; /* Saved PHY status word */ - SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */ - SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ - SK_BOOL PLinkBroken; /* Is Link broken ? */ - SK_BOOL PCheckPar; /* Do we check for parity errors ? */ - SK_BOOL HalfDupTimerActive; - SK_U8 PLinkCap; /* Link Capabilities */ - SK_U8 PLinkModeConf; /* Link Mode configured */ - SK_U8 PLinkMode; /* Link Mode currently used */ - SK_U8 PLinkModeStatus;/* Link Mode Status */ - SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ - SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ - SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ - SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ - SK_U8 PFlowCtrlMode; /* Flow Control Mode */ - SK_U8 PFlowCtrlStatus;/* Flow Control Status */ - SK_U8 PMSCap; /* Master/Slave Capabilities */ - SK_U8 PMSMode; /* Master/Slave Mode */ - SK_U8 PMSStatus; /* Master/Slave Status */ - SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */ - SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ - SK_U8 PCableLen; /* Cable Length */ - SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ - SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ - SK_U8 PPhyPowerState; /* PHY current power state */ - int PMacColThres; /* MAC Collision Threshold */ - int PMacJamLen; /* MAC Jam length */ - int PMacJamIpgVal; /* MAC Jam IPG */ - int PMacJamIpgData; /* MAC IPG Jam to Data */ - int PMacIpgData; /* MAC Data IPG */ - SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */ -} SK_GEPORT; - -/* - * Gigabit Ethernet Initialization Struct - * (has to be included in the adapter context) - */ -typedef struct s_GeInit { - int GIChipId; /* Chip Identification Number */ - int GIChipRev; /* Chip Revision Number */ - SK_U8 GIPciHwRev; /* PCI HW Revision Number */ - SK_BOOL GIGenesis; /* Genesis adapter ? */ - SK_BOOL GIYukon; /* YUKON-A1/Bx chip */ - SK_BOOL GIYukonLite; /* YUKON-Lite chip */ - SK_BOOL GICopperType; /* Copper Type adapter ? */ - SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ - SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ - SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ - SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ - SK_U16 GILedBlinkCtrl; /* LED Blink Control */ - int GIMacsFound; /* Number of MACs found on this adapter */ - int GIMacType; /* MAC Type used on this adapter */ - int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ - int GIPortUsage; /* Driver Port Usage */ - int GILevel; /* Initialization Level completed */ - int GIRamSize; /* The RAM size of the adapter in kB */ - int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ - SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ - SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ - SK_U32 GIValIrqMask; /* Value for Interrupt Mask */ - SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */ - SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ - SK_GEMACFUNC GIFunc; /* MAC depedent functions */ -} SK_GEINIT; - -/* - * Error numbers and messages for skxmac2.c and skgeinit.c - */ -#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) -#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" -#define SKERR_HWI_E002 (SKERR_HWI_E001+1) -#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" -#define SKERR_HWI_E003 (SKERR_HWI_E002+1) -#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" -#define SKERR_HWI_E004 (SKERR_HWI_E003+1) -#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" -#define SKERR_HWI_E005 (SKERR_HWI_E004+1) -#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" -#define SKERR_HWI_E006 (SKERR_HWI_E005+1) -#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" -#define SKERR_HWI_E007 (SKERR_HWI_E006+1) -#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" -#define SKERR_HWI_E008 (SKERR_HWI_E007+1) -#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" -#define SKERR_HWI_E009 (SKERR_HWI_E008+1) -#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" -#define SKERR_HWI_E010 (SKERR_HWI_E009+1) -#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" -#define SKERR_HWI_E011 (SKERR_HWI_E010+1) -#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" -#define SKERR_HWI_E012 (SKERR_HWI_E011+1) -#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" -#define SKERR_HWI_E013 (SKERR_HWI_E012+1) -#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" -#define SKERR_HWI_E014 (SKERR_HWI_E013+1) -#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" -#define SKERR_HWI_E015 (SKERR_HWI_E014+1) -#define SKERR_HWI_E015MSG "Illegal Link mode parameter" -#define SKERR_HWI_E016 (SKERR_HWI_E015+1) -#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" -#define SKERR_HWI_E017 (SKERR_HWI_E016+1) -#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" -#define SKERR_HWI_E018 (SKERR_HWI_E017+1) -#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" -#define SKERR_HWI_E019 (SKERR_HWI_E018+1) -#define SKERR_HWI_E019MSG "Illegal Speed parameter" -#define SKERR_HWI_E020 (SKERR_HWI_E019+1) -#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" -#define SKERR_HWI_E021 (SKERR_HWI_E020+1) -#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" -#define SKERR_HWI_E022 (SKERR_HWI_E021+1) -#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" -#define SKERR_HWI_E023 (SKERR_HWI_E022+1) -#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" -#define SKERR_HWI_E024 (SKERR_HWI_E023+1) -#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" -#define SKERR_HWI_E025 (SKERR_HWI_E024+1) -#define SKERR_HWI_E025MSG "" - -/* function prototypes ********************************************************/ - -#ifndef SK_KR_PROTO - -/* - * public functions in skgeinit.c - */ -extern void SkGePollTxD( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL PollTxD); - -extern void SkGeYellowLED( - SK_AC *pAC, - SK_IOC IoC, - int State); - -extern int SkGeCfgSync( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_U32 IntTime, - SK_U32 LimCount, - int SyncMode); - -extern void SkGeLoadLnkSyncCnt( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_U32 CntVal); - -extern void SkGeStopPort( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Dir, - int RstMode); - -extern int SkGeInit( - SK_AC *pAC, - SK_IOC IoC, - int Level); - -extern void SkGeDeInit( - SK_AC *pAC, - SK_IOC IoC); - -extern int SkGeInitPort( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkGeXmitLED( - SK_AC *pAC, - SK_IOC IoC, - int Led, - int Mode); - -extern int SkGeInitAssignRamToQueues( - SK_AC *pAC, - int ActivePort, - SK_BOOL DualNet); - -/* - * public functions in skxmac2.c - */ -extern void SkMacRxTxDisable( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacSoftRst( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacHardRst( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkXmInitMac( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkGmInitMac( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacInitPhy( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL DoLoop); - -extern void SkMacIrqDisable( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacFlushTxFifo( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacIrq( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern int SkMacAutoNegDone( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacAutoNegLipaPhy( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_U16 IStatus); - -extern int SkMacRxTxEnable( - SK_AC *pAC, - SK_IOC IoC, - int Port); - -extern void SkMacPromiscMode( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL Enable); - -extern void SkMacHashing( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL Enable); - -extern void SkXmPhyRead( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 SK_FAR *pVal); - -extern void SkXmPhyWrite( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 Val); - -extern void SkGmPhyRead( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 SK_FAR *pVal); - -extern void SkGmPhyWrite( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 Val); - -extern void SkXmClrExactAddr( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int StartNum, - int StopNum); - -extern void SkXmAutoNegLipaXmac( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_U16 IStatus); - -extern int SkXmUpdateStats( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port); - -extern int SkGmUpdateStats( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port); - -extern int SkXmMacStatistic( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port, - SK_U16 StatAddr, - SK_U32 SK_FAR *pVal); - -extern int SkGmMacStatistic( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port, - SK_U16 StatAddr, - SK_U32 SK_FAR *pVal); - -extern int SkXmResetCounter( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port); - -extern int SkGmResetCounter( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port); - -extern int SkXmOverflowStatus( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port, - SK_U16 IStatus, - SK_U64 SK_FAR *pStatus); - -extern int SkGmOverflowStatus( - SK_AC *pAC, - SK_IOC IoC, - unsigned int Port, - SK_U16 MacStatus, - SK_U64 SK_FAR *pStatus); - -extern int SkGmCableDiagStatus( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL StartTest); - -#ifdef SK_DIAG -extern void SkGePhyRead( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 *pVal); - -extern void SkGePhyWrite( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Addr, - SK_U16 Val); - -extern void SkMacSetRxCmd( - SK_AC *pAC, - SK_IOC IoC, - int Port, - int Mode); -extern void SkMacCrcGener( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL Enable); -extern void SkMacTimeStamp( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL Enable); -extern void SkXmSendCont( - SK_AC *pAC, - SK_IOC IoC, - int Port, - SK_BOOL Enable); -#endif /* SK_DIAG */ - -#else /* SK_KR_PROTO */ - -/* - * public functions in skgeinit.c - */ -extern void SkGePollTxD(); -extern void SkGeYellowLED(); -extern int SkGeCfgSync(); -extern void SkGeLoadLnkSyncCnt(); -extern void SkGeStopPort(); -extern int SkGeInit(); -extern void SkGeDeInit(); -extern int SkGeInitPort(); -extern void SkGeXmitLED(); -extern int SkGeInitAssignRamToQueues(); - -/* - * public functions in skxmac2.c - */ -extern void SkMacRxTxDisable(); -extern void SkMacSoftRst(); -extern void SkMacHardRst(); -extern void SkMacInitPhy(); -extern int SkMacRxTxEnable(); -extern void SkMacPromiscMode(); -extern void SkMacHashing(); -extern void SkMacIrqDisable(); -extern void SkMacFlushTxFifo(); -extern void SkMacIrq(); -extern int SkMacAutoNegDone(); -extern void SkMacAutoNegLipaPhy(); -extern void SkXmInitMac(); -extern void SkXmPhyRead(); -extern void SkXmPhyWrite(); -extern void SkGmInitMac(); -extern void SkGmPhyRead(); -extern void SkGmPhyWrite(); -extern void SkXmClrExactAddr(); -extern void SkXmAutoNegLipaXmac(); -extern int SkXmUpdateStats(); -extern int SkGmUpdateStats(); -extern int SkXmMacStatistic(); -extern int SkGmMacStatistic(); -extern int SkXmResetCounter(); -extern int SkGmResetCounter(); -extern int SkXmOverflowStatus(); -extern int SkGmOverflowStatus(); -extern int SkGmCableDiagStatus(); - -#ifdef SK_DIAG -extern void SkGePhyRead(); -extern void SkGePhyWrite(); -extern void SkMacSetRxCmd(); -extern void SkMacCrcGener(); -extern void SkMacTimeStamp(); -extern void SkXmSendCont(); -#endif /* SK_DIAG */ - -#endif /* SK_KR_PROTO */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_SKGEINIT_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h deleted file mode 100644 index ddd304f..0000000 --- a/drivers/net/sk98lin/h/skgepnm2.h +++ /dev/null @@ -1,334 +0,0 @@ -/***************************************************************************** - * - * Name: skgepnm2.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.36 $ - * Date: $Date: 2003/05/23 12:45:13 $ - * Purpose: Defines for Private Network Management Interface - * - ****************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef _SKGEPNM2_H_ -#define _SKGEPNM2_H_ - -/* - * General definitions - */ -#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */ -#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */ - -#define SK_PNMI_BUS_PCI 1 /* PCI bus*/ - -/* - * Actions - */ -#define SK_PNMI_ACT_IDLE 1 -#define SK_PNMI_ACT_RESET 2 -#define SK_PNMI_ACT_SELFTEST 3 -#define SK_PNMI_ACT_RESETCNT 4 - -/* - * VPD releated defines - */ - -#define SK_PNMI_VPD_RW 1 -#define SK_PNMI_VPD_RO 2 - -#define SK_PNMI_VPD_OK 0 -#define SK_PNMI_VPD_NOTFOUND 1 -#define SK_PNMI_VPD_CUT 2 -#define SK_PNMI_VPD_TIMEOUT 3 -#define SK_PNMI_VPD_FULL 4 -#define SK_PNMI_VPD_NOWRITE 5 -#define SK_PNMI_VPD_FATAL 6 - -#define SK_PNMI_VPD_IGNORE 0 -#define SK_PNMI_VPD_CREATE 1 -#define SK_PNMI_VPD_DELETE 2 - - -/* - * RLMT related defines - */ -#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */ - - -/* - * VCT internal status values - */ -#define SK_PNMI_VCT_PENDING 32 -#define SK_PNMI_VCT_TEST_DONE 64 -#define SK_PNMI_VCT_LINK 128 - -/* - * Internal table definitions - */ -#define SK_PNMI_GET 0 -#define SK_PNMI_PRESET 1 -#define SK_PNMI_SET 2 - -#define SK_PNMI_RO 0 -#define SK_PNMI_RW 1 -#define SK_PNMI_WO 2 - -typedef struct s_OidTabEntry { - SK_U32 Id; - SK_U32 InstanceNo; - unsigned int StructSize; - unsigned int Offset; - int Access; - int (* Func)(SK_AC *pAc, SK_IOC pIo, int action, - SK_U32 Id, char* pBuf, unsigned int* pLen, - SK_U32 Instance, unsigned int TableIndex, - SK_U32 NetNumber); - SK_U16 Param; -} SK_PNMI_TAB_ENTRY; - - -/* - * Trap lengths - */ -#define SK_PNMI_TRAP_SIMPLE_LEN 17 -#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46 -#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23 -#define SK_PNMI_TRAP_RLMT_PORT_LEN 23 - -/* - * Number of MAC types supported - */ -#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1) - -/* - * MAC statistic data list (overall set for MAC types used) - */ -enum SK_MACSTATS { - SK_PNMI_HTX = 0, - SK_PNMI_HTX_OCTET, - SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, - SK_PNMI_HTX_OCTETLOW, - SK_PNMI_HTX_BROADCAST, - SK_PNMI_HTX_MULTICAST, - SK_PNMI_HTX_UNICAST, - SK_PNMI_HTX_BURST, - SK_PNMI_HTX_PMACC, - SK_PNMI_HTX_MACC, - SK_PNMI_HTX_COL, - SK_PNMI_HTX_SINGLE_COL, - SK_PNMI_HTX_MULTI_COL, - SK_PNMI_HTX_EXCESS_COL, - SK_PNMI_HTX_LATE_COL, - SK_PNMI_HTX_DEFFERAL, - SK_PNMI_HTX_EXCESS_DEF, - SK_PNMI_HTX_UNDERRUN, - SK_PNMI_HTX_CARRIER, - SK_PNMI_HTX_UTILUNDER, - SK_PNMI_HTX_UTILOVER, - SK_PNMI_HTX_64, - SK_PNMI_HTX_127, - SK_PNMI_HTX_255, - SK_PNMI_HTX_511, - SK_PNMI_HTX_1023, - SK_PNMI_HTX_MAX, - SK_PNMI_HTX_LONGFRAMES, - SK_PNMI_HTX_SYNC, - SK_PNMI_HTX_SYNC_OCTET, - SK_PNMI_HTX_RESERVED, - - SK_PNMI_HRX, - SK_PNMI_HRX_OCTET, - SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET, - SK_PNMI_HRX_OCTETLOW, - SK_PNMI_HRX_BADOCTET, - SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET, - SK_PNMI_HRX_BADOCTETLOW, - SK_PNMI_HRX_BROADCAST, - SK_PNMI_HRX_MULTICAST, - SK_PNMI_HRX_UNICAST, - SK_PNMI_HRX_PMACC, - SK_PNMI_HRX_MACC, - SK_PNMI_HRX_PMACC_ERR, - SK_PNMI_HRX_MACC_UNKWN, - SK_PNMI_HRX_BURST, - SK_PNMI_HRX_MISSED, - SK_PNMI_HRX_FRAMING, - SK_PNMI_HRX_UNDERSIZE, - SK_PNMI_HRX_OVERFLOW, - SK_PNMI_HRX_JABBER, - SK_PNMI_HRX_CARRIER, - SK_PNMI_HRX_IRLENGTH, - SK_PNMI_HRX_SYMBOL, - SK_PNMI_HRX_SHORTS, - SK_PNMI_HRX_RUNT, - SK_PNMI_HRX_TOO_LONG, - SK_PNMI_HRX_FCS, - SK_PNMI_HRX_CEXT, - SK_PNMI_HRX_UTILUNDER, - SK_PNMI_HRX_UTILOVER, - SK_PNMI_HRX_64, - SK_PNMI_HRX_127, - SK_PNMI_HRX_255, - SK_PNMI_HRX_511, - SK_PNMI_HRX_1023, - SK_PNMI_HRX_MAX, - SK_PNMI_HRX_LONGFRAMES, - - SK_PNMI_HRX_RESERVED, - - SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */ -}; - -/* - * MAC specific data - */ -typedef struct s_PnmiStatAddr { - SK_U16 Reg; /* MAC register containing the value */ - SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/ -} SK_PNMI_STATADDR; - - -/* - * SK_PNMI_STRUCT_DATA copy offset evaluation macros - */ -#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) -#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) -#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e)) -#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e)) -#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e)) -#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e)) -#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e)) -#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e)) -#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e)) -#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e)) - -#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \ - Val32 = (s); \ - pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ - &(((SK_PNMI_STRUCT_DATA *)0)-> \ - ReturnStatus.ErrorStatus)); \ - SK_PNMI_STORE_U32(pVal, Val32); \ - Val32 = (o); \ - pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ - &(((SK_PNMI_STRUCT_DATA *)0)-> \ - ReturnStatus.ErrorOffset)); \ - SK_PNMI_STORE_U32(pVal, Val32);} - -/* - * Time macros - */ -#ifndef SK_PNMI_HUNDREDS_SEC -#if SK_TICKS_PER_SEC == 100 -#define SK_PNMI_HUNDREDS_SEC(t) (t) -#else -#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC)) -#endif /* !SK_TICKS_PER_SEC */ -#endif /* !SK_PNMI_HUNDREDS_SEC */ - -/* - * Macros to work around alignment problems - */ -#ifndef SK_PNMI_STORE_U16 -#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \ - *((char *)(p) + 1) = \ - *(((char *)&(v)) + 1);} -#endif - -#ifndef SK_PNMI_STORE_U32 -#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \ - *((char *)(p) + 1) = \ - *(((char *)&(v)) + 1); \ - *((char *)(p) + 2) = \ - *(((char *)&(v)) + 2); \ - *((char *)(p) + 3) = \ - *(((char *)&(v)) + 3);} -#endif - -#ifndef SK_PNMI_STORE_U64 -#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \ - *((char *)(p) + 1) = \ - *(((char *)&(v)) + 1); \ - *((char *)(p) + 2) = \ - *(((char *)&(v)) + 2); \ - *((char *)(p) + 3) = \ - *(((char *)&(v)) + 3); \ - *((char *)(p) + 4) = \ - *(((char *)&(v)) + 4); \ - *((char *)(p) + 5) = \ - *(((char *)&(v)) + 5); \ - *((char *)(p) + 6) = \ - *(((char *)&(v)) + 6); \ - *((char *)(p) + 7) = \ - *(((char *)&(v)) + 7);} -#endif - -#ifndef SK_PNMI_READ_U16 -#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \ - *(((char *)&(v)) + 1) = \ - *((char *)(p) + 1);} -#endif - -#ifndef SK_PNMI_READ_U32 -#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \ - *(((char *)&(v)) + 1) = \ - *((char *)(p) + 1); \ - *(((char *)&(v)) + 2) = \ - *((char *)(p) + 2); \ - *(((char *)&(v)) + 3) = \ - *((char *)(p) + 3);} -#endif - -#ifndef SK_PNMI_READ_U64 -#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \ - *(((char *)&(v)) + 1) = \ - *((char *)(p) + 1); \ - *(((char *)&(v)) + 2) = \ - *((char *)(p) + 2); \ - *(((char *)&(v)) + 3) = \ - *((char *)(p) + 3); \ - *(((char *)&(v)) + 4) = \ - *((char *)(p) + 4); \ - *(((char *)&(v)) + 5) = \ - *((char *)(p) + 5); \ - *(((char *)&(v)) + 6) = \ - *((char *)(p) + 6); \ - *(((char *)&(v)) + 7) = \ - *((char *)(p) + 7);} -#endif - -/* - * Macros for Debug - */ -#ifdef DEBUG - -#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \ - pAC->Pnmi.RlmtUpdatedFlag > 0 || \ - pAC->Pnmi.SirqUpdatedFlag > 0) { \ - SK_DBG_MSG(pAC, \ - SK_DBGMOD_PNMI, \ - SK_DBGCAT_CTRL, \ - ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \ - vSt, \ - pAC->Pnmi.MacUpdatedFlag, \ - pAC->Pnmi.RlmtUpdatedFlag, \ - pAC->Pnmi.SirqUpdatedFlag))}} - -#else /* !DEBUG */ - -#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */ - -#endif /* !DEBUG */ - -#endif /* _SKGEPNM2_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h deleted file mode 100644 index 1ed214c..0000000 --- a/drivers/net/sk98lin/h/skgepnmi.h +++ /dev/null @@ -1,962 +0,0 @@ -/***************************************************************************** - * - * Name: skgepnmi.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.62 $ - * Date: $Date: 2003/08/15 12:31:52 $ - * Purpose: Defines for Private Network Management Interface - * - ****************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef _SKGEPNMI_H_ -#define _SKGEPNMI_H_ - -/* - * Include dependencies - */ -#include "h/sktypes.h" -#include "h/skerror.h" -#include "h/sktimer.h" -#include "h/ski2c.h" -#include "h/skaddr.h" -#include "h/skrlmt.h" -#include "h/skvpd.h" - -/* - * Management Database Version - */ -#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */ - - -/* - * Event definitions - */ -#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ -#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ -#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ -#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ -#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ -#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ -#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */ -#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ -#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ - -#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ -#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ -#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */ -#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */ -#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ -#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets - 1 = single net; 2 = dual net */ -#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */ - - -/* - * Return values - */ -#define SK_PNMI_ERR_OK 0 -#define SK_PNMI_ERR_GENERAL 1 -#define SK_PNMI_ERR_TOO_SHORT 2 -#define SK_PNMI_ERR_BAD_VALUE 3 -#define SK_PNMI_ERR_READ_ONLY 4 -#define SK_PNMI_ERR_UNKNOWN_OID 5 -#define SK_PNMI_ERR_UNKNOWN_INST 6 -#define SK_PNMI_ERR_UNKNOWN_NET 7 -#define SK_PNMI_ERR_NOT_SUPPORTED 10 - - -/* - * Return values of driver reset function SK_DRIVER_RESET() and - * driver event function SK_DRIVER_EVENT() - */ -#define SK_PNMI_ERR_OK 0 -#define SK_PNMI_ERR_FAIL 1 - - -/* - * Return values of driver test function SK_DRIVER_SELFTEST() - */ -#define SK_PNMI_TST_UNKNOWN (1 << 0) -#define SK_PNMI_TST_TRANCEIVER (1 << 1) -#define SK_PNMI_TST_ASIC (1 << 2) -#define SK_PNMI_TST_SENSOR (1 << 3) -#define SK_PNMI_TST_POWERMGMT (1 << 4) -#define SK_PNMI_TST_PCI (1 << 5) -#define SK_PNMI_TST_MAC (1 << 6) - - -/* - * RLMT specific definitions - */ -#define SK_PNMI_RLMT_STATUS_STANDBY 1 -#define SK_PNMI_RLMT_STATUS_ACTIVE 2 -#define SK_PNMI_RLMT_STATUS_ERROR 3 - -#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1 -#define SK_PNMI_RLMT_LSTAT_AUTONEG 2 -#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3 -#define SK_PNMI_RLMT_LSTAT_LOG_UP 4 -#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5 - -#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK) -#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK) -#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG) -/* #define SK_PNMI_RLMT_MODE_CHK_EX */ - -/* - * OID definition - */ -#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */ - -#define OID_GEN_XMIT_OK 0x00020101 -#define OID_GEN_RCV_OK 0x00020102 -#define OID_GEN_XMIT_ERROR 0x00020103 -#define OID_GEN_RCV_ERROR 0x00020104 -#define OID_GEN_RCV_NO_BUFFER 0x00020105 - -/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */ -#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 -/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */ -#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 -/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */ -#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 -/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */ -#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 -/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */ -#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A -/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */ -#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C -#define OID_GEN_RCV_CRC_ERROR 0x0002020D -#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E - -#define OID_802_3_PERMANENT_ADDRESS 0x01010101 -#define OID_802_3_CURRENT_ADDRESS 0x01010102 -/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ -/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ -/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ - -#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 -#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 -#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 -#define OID_802_3_XMIT_DEFERRED 0x01020201 -#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 -#define OID_802_3_RCV_OVERRUN 0x01020203 -#define OID_802_3_XMIT_UNDERRUN 0x01020204 -#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 -#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 - -/* - * PnP and PM OIDs - */ -#ifdef SK_POWER_MGMT -#define OID_PNP_CAPABILITIES 0xFD010100 -#define OID_PNP_SET_POWER 0xFD010101 -#define OID_PNP_QUERY_POWER 0xFD010102 -#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 -#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 -#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 -#endif /* SK_POWER_MGMT */ - -#endif /* _NDIS_ */ - -#define OID_SKGE_MDB_VERSION 0xFF010100 -#define OID_SKGE_SUPPORTED_LIST 0xFF010101 -#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 -#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 -#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 -#define OID_SKGE_VPD_KEY 0xFF010105 -#define OID_SKGE_VPD_VALUE 0xFF010106 -#define OID_SKGE_VPD_ACCESS 0xFF010107 -#define OID_SKGE_VPD_ACTION 0xFF010108 - -#define OID_SKGE_PORT_NUMBER 0xFF010110 -#define OID_SKGE_DEVICE_TYPE 0xFF010111 -#define OID_SKGE_DRIVER_DESCR 0xFF010112 -#define OID_SKGE_DRIVER_VERSION 0xFF010113 -#define OID_SKGE_HW_DESCR 0xFF010114 -#define OID_SKGE_HW_VERSION 0xFF010115 -#define OID_SKGE_CHIPSET 0xFF010116 -#define OID_SKGE_ACTION 0xFF010117 -#define OID_SKGE_RESULT 0xFF010118 -#define OID_SKGE_BUS_TYPE 0xFF010119 -#define OID_SKGE_BUS_SPEED 0xFF01011A -#define OID_SKGE_BUS_WIDTH 0xFF01011B -/* 0xFF01011C unused */ -#define OID_SKGE_DIAG_ACTION 0xFF01011D -#define OID_SKGE_DIAG_RESULT 0xFF01011E -#define OID_SKGE_MTU 0xFF01011F -#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 -#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 -#define OID_SKGE_PMD 0xFF010122 -#define OID_SKGE_CONNECTOR 0xFF010123 -#define OID_SKGE_LINK_CAP 0xFF010124 -#define OID_SKGE_LINK_MODE 0xFF010125 -#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 -#define OID_SKGE_LINK_STATUS 0xFF010127 -#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 -#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 -#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A -#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B -#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C -#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D -#define OID_SKGE_MULTICAST_LIST 0xFF01012E -#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F - -#define OID_SKGE_TRAP 0xFF010130 -#define OID_SKGE_TRAP_NUMBER 0xFF010131 - -#define OID_SKGE_RLMT_MODE 0xFF010140 -#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 -#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 -#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143 -#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160 - -#define OID_SKGE_SPEED_CAP 0xFF010170 -#define OID_SKGE_SPEED_MODE 0xFF010171 -#define OID_SKGE_SPEED_STATUS 0xFF010172 - -#define OID_SKGE_BOARDLEVEL 0xFF010180 - -#define OID_SKGE_SENSOR_NUMBER 0xFF020100 -#define OID_SKGE_SENSOR_INDEX 0xFF020101 -#define OID_SKGE_SENSOR_DESCR 0xFF020102 -#define OID_SKGE_SENSOR_TYPE 0xFF020103 -#define OID_SKGE_SENSOR_VALUE 0xFF020104 -#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105 -#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106 -#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107 -#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108 -#define OID_SKGE_SENSOR_STATUS 0xFF020109 -#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A -#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B -#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C -#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D - -#define OID_SKGE_CHKSM_NUMBER 0xFF020110 -#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 -#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112 -#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 -#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 -#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115 - -#define OID_SKGE_STAT_TX 0xFF020120 -#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 -#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 -#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 -#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 -#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 -#define OID_SKGE_STAT_TX_BURST 0xFF020126 -#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 -#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 -#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 -#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A -#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B -#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C -#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D -#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E -#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F -#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 -/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ -#define OID_SKGE_STAT_TX_64 0xFF020132 -#define OID_SKGE_STAT_TX_127 0xFF020133 -#define OID_SKGE_STAT_TX_255 0xFF020134 -#define OID_SKGE_STAT_TX_511 0xFF020135 -#define OID_SKGE_STAT_TX_1023 0xFF020136 -#define OID_SKGE_STAT_TX_MAX 0xFF020137 -#define OID_SKGE_STAT_TX_SYNC 0xFF020138 -#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139 -#define OID_SKGE_STAT_RX 0xFF02013A -#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B -#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C -#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D -#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E -#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F -#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 -#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 -#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142 -#define OID_SKGE_STAT_RX_BURST 0xFF020143 -#define OID_SKGE_STAT_RX_MISSED 0xFF020144 -#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 -#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 -#define OID_SKGE_STAT_RX_JABBER 0xFF020147 -#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 -#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 -#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A -#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B -#define OID_SKGE_STAT_RX_RUNT 0xFF02014C -#define OID_SKGE_STAT_RX_CEXT 0xFF02014D -#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E -#define OID_SKGE_STAT_RX_FCS 0xFF02014F -/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ -#define OID_SKGE_STAT_RX_64 0xFF020151 -#define OID_SKGE_STAT_RX_127 0xFF020152 -#define OID_SKGE_STAT_RX_255 0xFF020153 -#define OID_SKGE_STAT_RX_511 0xFF020154 -#define OID_SKGE_STAT_RX_1023 0xFF020155 -#define OID_SKGE_STAT_RX_MAX 0xFF020156 -#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 - -#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 -#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 -#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 -#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 - -#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 -#define OID_SKGE_RLMT_STATUS 0xFF020165 -#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 -#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 -#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 -#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 - -#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150 -#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 -#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 -#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 -#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154 -#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 - -#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 -#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 -#define OID_SKGE_TX_RETRY 0xFF020172 -#define OID_SKGE_RX_INTR_CTS 0xFF020173 -#define OID_SKGE_TX_INTR_CTS 0xFF020174 -#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 -#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 -#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 -#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 -#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179 -#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A -#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B -#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C -#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D -#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E -#define OID_SKGE_SYSUPTIME 0xFF02017F - -#define OID_SKGE_ALL_DATA 0xFF020190 - -/* Defines for VCT. */ -#define OID_SKGE_VCT_GET 0xFF020200 -#define OID_SKGE_VCT_SET 0xFF020201 -#define OID_SKGE_VCT_STATUS 0xFF020202 - -#ifdef SK_DIAG_SUPPORT -/* Defines for driver DIAG mode. */ -#define OID_SKGE_DIAG_MODE 0xFF020204 -#endif /* SK_DIAG_SUPPORT */ - -/* New OIDs */ -#define OID_SKGE_DRIVER_RELDATE 0xFF020210 -#define OID_SKGE_DRIVER_FILENAME 0xFF020211 -#define OID_SKGE_CHIPID 0xFF020212 -#define OID_SKGE_RAMSIZE 0xFF020213 -#define OID_SKGE_VAUXAVAIL 0xFF020214 -#define OID_SKGE_PHY_TYPE 0xFF020215 -#define OID_SKGE_PHY_LP_MODE 0xFF020216 - -/* VCT struct to store a backup copy of VCT data after a port reset. */ -typedef struct s_PnmiVct { - SK_U8 VctStatus; - SK_U8 PCableLen; - SK_U32 PMdiPairLen[4]; - SK_U8 PMdiPairSts[4]; -} SK_PNMI_VCT; - - -/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */ -#define SK_PNMI_VCT_NONE 0 -#define SK_PNMI_VCT_OLD_VCT_DATA 1 -#define SK_PNMI_VCT_NEW_VCT_DATA 2 -#define SK_PNMI_VCT_OLD_DSP_DATA 4 -#define SK_PNMI_VCT_NEW_DSP_DATA 8 -#define SK_PNMI_VCT_RUNNING 16 - - -/* VCT cable test status. */ -#define SK_PNMI_VCT_NORMAL_CABLE 0 -#define SK_PNMI_VCT_SHORT_CABLE 1 -#define SK_PNMI_VCT_OPEN_CABLE 2 -#define SK_PNMI_VCT_TEST_FAIL 3 -#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 - -#define OID_SKGE_TRAP_SEN_WAR_LOW 500 -#define OID_SKGE_TRAP_SEN_WAR_UPP 501 -#define OID_SKGE_TRAP_SEN_ERR_LOW 502 -#define OID_SKGE_TRAP_SEN_ERR_UPP 503 -#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520 -#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521 -#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522 -#define OID_SKGE_TRAP_RLMT_PORT_UP 523 -#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524 - -#ifdef SK_DIAG_SUPPORT -/* Defines for driver DIAG mode. */ -#define SK_DIAG_ATTACHED 2 -#define SK_DIAG_RUNNING 1 -#define SK_DIAG_IDLE 0 -#endif /* SK_DIAG_SUPPORT */ - -/* - * Generic PNMI IOCTL subcommand definitions. - */ -#define SK_GET_SINGLE_VAR 1 -#define SK_SET_SINGLE_VAR 2 -#define SK_PRESET_SINGLE_VAR 3 -#define SK_GET_FULL_MIB 4 -#define SK_SET_FULL_MIB 5 -#define SK_PRESET_FULL_MIB 6 - - -/* - * Define error numbers and messages for syslog - */ -#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1) -#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID" -#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2) -#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys" -#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3) -#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID" -#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4) -#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action" -#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5) -#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver" -#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6) -#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command" -#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7) -#define SK_PNMI_ERR007MSG "General: Driver description not initialized" -#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8) -#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID" -#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9) -#define SK_PNMI_ERR009MSG "Addr: Unknown OID" -#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10) -#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID" -#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11) -#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long" -#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12) -#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID" -#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13) -#define SK_PNMI_ERR013MSG "" -#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14) -#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys" -#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15) -#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small" -#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16) -#define SK_PNMI_ERR016MSG "Vpd: Key string too long" -#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17) -#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer" -#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18) -#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid" -#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19) -#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long" -#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21) -#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long" -#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22) -#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before" -#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23) -#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action" -#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24) -#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action" -#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25) -#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry" -#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26) -#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD" -#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27) -#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry" -#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28) -#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry" -#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29) -#define SK_PNMI_ERR029MSG "General: Driver description string too long" -#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30) -#define SK_PNMI_ERR030MSG "General: Driver version not initialized" -#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31) -#define SK_PNMI_ERR031MSG "General: Driver version string too long" -#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32) -#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr" -#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33) -#define SK_PNMI_ERR033MSG "General: HW description string too long" -#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34) -#define SK_PNMI_ERR034MSG "General: Unknown OID" -#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35) -#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID" -#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36) -#define SK_PNMI_ERR036MSG "" -#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37) -#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0" -#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38) -#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0" -#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39) -#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID" -#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40) -#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID" -#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41) -#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID" -#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42) -#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0" -#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43) -#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0" -#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44) -#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0" -#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45) -#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0" -#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46) -#define SK_PNMI_ERR046MSG "Monitor: Unknown OID" -#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47) -#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0" -#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48) -#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0" -#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49) -#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!" -#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50) -#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!" -#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51) -#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious" -#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52) -#define SK_PNMI_ERR052MSG "" -#define SK_PNMI_ERR053 (SK_ERRBASE_PNMI + 53) -#define SK_PNMI_ERR053MSG "General: Driver release date not initialized" -#define SK_PNMI_ERR054 (SK_ERRBASE_PNMI + 54) -#define SK_PNMI_ERR054MSG "General: Driver release date string too long" -#define SK_PNMI_ERR055 (SK_ERRBASE_PNMI + 55) -#define SK_PNMI_ERR055MSG "General: Driver file name not initialized" -#define SK_PNMI_ERR056 (SK_ERRBASE_PNMI + 56) -#define SK_PNMI_ERR056MSG "General: Driver file name string too long" - -/* - * Management counter macros called by the driver - */ -#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \ - (char *)(v)) - -#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \ - (char *)(v)) - -#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v) ((pAC)->Pnmi.pDriverReleaseDate = \ - (char *)(v)) - -#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v) ((pAC)->Pnmi.pDriverFileName = \ - (char *)(v)) - -#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \ - { \ - (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \ - if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \ - (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \ - } \ - } -#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++) -#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++) -#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++) -#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++) -#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++) -#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \ - ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v)); -#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \ - { \ - ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \ - (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \ - } -#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++); - -#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \ - { \ - if ((p) < SK_MAX_MACS) { \ - ((pAC)->Pnmi.Port[p].StatSyncCts)++; \ - (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \ - } \ - } - -#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \ - { \ - if ((p) < SK_MAX_MACS) { \ - ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \ - } \ - } - -#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \ - { \ - if ((p) < SK_MAX_MACS) { \ - ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \ - } \ - } - -#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \ - { \ - if ((p) < SK_MAX_MACS) { \ - ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \ - } \ - } - -/* - * Conversion Macros - */ -#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1) -#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1) -#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1) -#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1) -#define SK_PNMI_PORT_PHYS2INST(pAC,p) \ - (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2)) -#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2) - -/* - * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct - */ -#define SK_PNMI_VPD_KEY_SIZE 5 -#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE) -#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4) -#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */ - -#define SK_PNMI_MULTICAST_LISTLEN 64 -#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS) -#define SK_PNMI_CHECKSUM_ENTRIES 3 -#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) -#define SK_PNMI_MONITOR_ENTRIES 20 -#define SK_PNMI_TRAP_ENTRIES 10 -#define SK_PNMI_TRAPLEN 128 -#define SK_PNMI_STRINGLEN1 80 -#define SK_PNMI_STRINGLEN2 25 -#define SK_PNMI_TRAP_QUEUE_LEN 512 - -typedef struct s_PnmiVpd { - char VpdKey[SK_PNMI_VPD_KEY_SIZE]; - char VpdValue[SK_PNMI_VPD_DATALEN]; - SK_U8 VpdAccess; - SK_U8 VpdAction; -} SK_PNMI_VPD; - -typedef struct s_PnmiSensor { - SK_U8 SensorIndex; - char SensorDescr[SK_PNMI_STRINGLEN2]; - SK_U8 SensorType; - SK_U32 SensorValue; - SK_U32 SensorWarningThresholdLow; - SK_U32 SensorWarningThresholdHigh; - SK_U32 SensorErrorThresholdLow; - SK_U32 SensorErrorThresholdHigh; - SK_U8 SensorStatus; - SK_U64 SensorWarningCts; - SK_U64 SensorErrorCts; - SK_U64 SensorWarningTimestamp; - SK_U64 SensorErrorTimestamp; -} SK_PNMI_SENSOR; - -typedef struct s_PnmiChecksum { - SK_U64 ChecksumRxOkCts; - SK_U64 ChecksumRxUnableCts; - SK_U64 ChecksumRxErrCts; - SK_U64 ChecksumTxOkCts; - SK_U64 ChecksumTxUnableCts; -} SK_PNMI_CHECKSUM; - -typedef struct s_PnmiStat { - SK_U64 StatTxOkCts; - SK_U64 StatTxOctetsOkCts; - SK_U64 StatTxBroadcastOkCts; - SK_U64 StatTxMulticastOkCts; - SK_U64 StatTxUnicastOkCts; - SK_U64 StatTxLongFramesCts; - SK_U64 StatTxBurstCts; - SK_U64 StatTxPauseMacCtrlCts; - SK_U64 StatTxMacCtrlCts; - SK_U64 StatTxSingleCollisionCts; - SK_U64 StatTxMultipleCollisionCts; - SK_U64 StatTxExcessiveCollisionCts; - SK_U64 StatTxLateCollisionCts; - SK_U64 StatTxDeferralCts; - SK_U64 StatTxExcessiveDeferralCts; - SK_U64 StatTxFifoUnderrunCts; - SK_U64 StatTxCarrierCts; - SK_U64 Dummy1; /* StatTxUtilization */ - SK_U64 StatTx64Cts; - SK_U64 StatTx127Cts; - SK_U64 StatTx255Cts; - SK_U64 StatTx511Cts; - SK_U64 StatTx1023Cts; - SK_U64 StatTxMaxCts; - SK_U64 StatTxSyncCts; - SK_U64 StatTxSyncOctetsCts; - SK_U64 StatRxOkCts; - SK_U64 StatRxOctetsOkCts; - SK_U64 StatRxBroadcastOkCts; - SK_U64 StatRxMulticastOkCts; - SK_U64 StatRxUnicastOkCts; - SK_U64 StatRxLongFramesCts; - SK_U64 StatRxPauseMacCtrlCts; - SK_U64 StatRxMacCtrlCts; - SK_U64 StatRxPauseMacCtrlErrorCts; - SK_U64 StatRxMacCtrlUnknownCts; - SK_U64 StatRxBurstCts; - SK_U64 StatRxMissedCts; - SK_U64 StatRxFramingCts; - SK_U64 StatRxFifoOverflowCts; - SK_U64 StatRxJabberCts; - SK_U64 StatRxCarrierCts; - SK_U64 StatRxIRLengthCts; - SK_U64 StatRxSymbolCts; - SK_U64 StatRxShortsCts; - SK_U64 StatRxRuntCts; - SK_U64 StatRxCextCts; - SK_U64 StatRxTooLongCts; - SK_U64 StatRxFcsCts; - SK_U64 Dummy2; /* StatRxUtilization */ - SK_U64 StatRx64Cts; - SK_U64 StatRx127Cts; - SK_U64 StatRx255Cts; - SK_U64 StatRx511Cts; - SK_U64 StatRx1023Cts; - SK_U64 StatRxMaxCts; -} SK_PNMI_STAT; - -typedef struct s_PnmiConf { - char ConfMacCurrentAddr[6]; - char ConfMacFactoryAddr[6]; - SK_U8 ConfPMD; - SK_U8 ConfConnector; - SK_U32 ConfPhyType; - SK_U32 ConfPhyMode; - SK_U8 ConfLinkCapability; - SK_U8 ConfLinkMode; - SK_U8 ConfLinkModeStatus; - SK_U8 ConfLinkStatus; - SK_U8 ConfFlowCtrlCapability; - SK_U8 ConfFlowCtrlMode; - SK_U8 ConfFlowCtrlStatus; - SK_U8 ConfPhyOperationCapability; - SK_U8 ConfPhyOperationMode; - SK_U8 ConfPhyOperationStatus; - SK_U8 ConfSpeedCapability; - SK_U8 ConfSpeedMode; - SK_U8 ConfSpeedStatus; -} SK_PNMI_CONF; - -typedef struct s_PnmiRlmt { - SK_U32 RlmtIndex; - SK_U32 RlmtStatus; - SK_U64 RlmtTxHelloCts; - SK_U64 RlmtRxHelloCts; - SK_U64 RlmtTxSpHelloReqCts; - SK_U64 RlmtRxSpHelloCts; -} SK_PNMI_RLMT; - -typedef struct s_PnmiRlmtMonitor { - SK_U32 RlmtMonitorIndex; - char RlmtMonitorAddr[6]; - SK_U64 RlmtMonitorErrorCts; - SK_U64 RlmtMonitorTimestamp; - SK_U8 RlmtMonitorAdmin; -} SK_PNMI_RLMT_MONITOR; - -typedef struct s_PnmiRequestStatus { - SK_U32 ErrorStatus; - SK_U32 ErrorOffset; -} SK_PNMI_REQUEST_STATUS; - -typedef struct s_PnmiStrucData { - SK_U32 MgmtDBVersion; - SK_PNMI_REQUEST_STATUS ReturnStatus; - SK_U32 VpdFreeBytes; - char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE]; - SK_U32 VpdEntriesNumber; - SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES]; - SK_U32 PortNumber; - SK_U32 DeviceType; - char DriverDescr[SK_PNMI_STRINGLEN1]; - char DriverVersion[SK_PNMI_STRINGLEN2]; - char DriverReleaseDate[SK_PNMI_STRINGLEN1]; - char DriverFileName[SK_PNMI_STRINGLEN1]; - char HwDescr[SK_PNMI_STRINGLEN1]; - char HwVersion[SK_PNMI_STRINGLEN2]; - SK_U16 Chipset; - SK_U32 ChipId; - SK_U8 VauxAvail; - SK_U32 RamSize; - SK_U32 MtuSize; - SK_U32 Action; - SK_U32 TestResult; - SK_U8 BusType; - SK_U8 BusSpeed; - SK_U8 BusWidth; - SK_U8 SensorNumber; - SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES]; - SK_U8 ChecksumNumber; - SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES]; - SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES]; - SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES]; - SK_U8 RlmtMode; - SK_U32 RlmtPortNumber; - SK_U8 RlmtPortActive; - SK_U8 RlmtPortPreferred; - SK_U64 RlmtChangeCts; - SK_U64 RlmtChangeTime; - SK_U64 RlmtChangeEstimate; - SK_U64 RlmtChangeThreshold; - SK_PNMI_RLMT Rlmt[SK_MAX_MACS]; - SK_U32 RlmtMonitorNumber; - SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES]; - SK_U32 TrapNumber; - SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN]; - SK_U64 TxSwQueueLen; - SK_U64 TxSwQueueMax; - SK_U64 TxRetryCts; - SK_U64 RxIntrCts; - SK_U64 TxIntrCts; - SK_U64 RxNoBufCts; - SK_U64 TxNoBufCts; - SK_U64 TxUsedDescrNo; - SK_U64 RxDeliveredCts; - SK_U64 RxOctetsDeliveredCts; - SK_U64 RxHwErrorsCts; - SK_U64 TxHwErrorsCts; - SK_U64 InErrorsCts; - SK_U64 OutErrorsCts; - SK_U64 ErrRecoveryCts; - SK_U64 SysUpTime; -} SK_PNMI_STRUCT_DATA; - -#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA)) -#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\ - &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes)) - /* - * ReturnStatus field - * must be located - * before VpdFreeBytes - */ - -/* - * Various definitions - */ -#define SK_PNMI_MAX_PROTOS 3 - -#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum - * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK - * for check while init phase 1 - */ - -/* - * Estimate data structure - */ -typedef struct s_PnmiEstimate { - unsigned int EstValueIndex; - SK_U64 EstValue[7]; - SK_U64 Estimate; - SK_TIMER EstTimer; -} SK_PNMI_ESTIMATE; - - -/* - * VCT timer data structure - */ -typedef struct s_VctTimer { - SK_TIMER VctTimer; -} SK_PNMI_VCT_TIMER; - - -/* - * PNMI specific adapter context structure - */ -typedef struct s_PnmiPort { - SK_U64 StatSyncCts; - SK_U64 StatSyncOctetsCts; - SK_U64 StatRxLongFrameCts; - SK_U64 StatRxFrameTooLongCts; - SK_U64 StatRxPMaccErr; - SK_U64 TxSwQueueLen; - SK_U64 TxSwQueueMax; - SK_U64 TxRetryCts; - SK_U64 RxIntrCts; - SK_U64 TxIntrCts; - SK_U64 RxNoBufCts; - SK_U64 TxNoBufCts; - SK_U64 TxUsedDescrNo; - SK_U64 RxDeliveredCts; - SK_U64 RxOctetsDeliveredCts; - SK_U64 RxHwErrorsCts; - SK_U64 TxHwErrorsCts; - SK_U64 InErrorsCts; - SK_U64 OutErrorsCts; - SK_U64 ErrRecoveryCts; - SK_U64 RxShortZeroMark; - SK_U64 CounterOffset[SK_PNMI_CNT_NO]; - SK_U32 CounterHigh[SK_PNMI_CNT_NO]; - SK_BOOL ActiveFlag; - SK_U8 Align[3]; -} SK_PNMI_PORT; - - -typedef struct s_PnmiData { - SK_PNMI_PORT Port [SK_MAX_MACS]; - SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */ - SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO]; - SK_U32 TestResult; - char HwVersion[10]; - SK_U16 Align01; - - char *pDriverDescription; - char *pDriverVersion; - char *pDriverReleaseDate; - char *pDriverFileName; - - int MacUpdatedFlag; - int RlmtUpdatedFlag; - int SirqUpdatedFlag; - - SK_U64 RlmtChangeCts; - SK_U64 RlmtChangeTime; - SK_PNMI_ESTIMATE RlmtChangeEstimate; - SK_U64 RlmtChangeThreshold; - - SK_U64 StartUpTime; - SK_U32 DeviceType; - char PciBusSpeed; - char PciBusWidth; - char Chipset; - char PMD; - char Connector; - SK_BOOL DualNetActiveFlag; - SK_U16 Align02; - - char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN]; - unsigned int TrapBufFree; - unsigned int TrapQueueBeg; - unsigned int TrapQueueEnd; - unsigned int TrapBufPad; - unsigned int TrapUnique; - SK_U8 VctStatus[SK_MAX_MACS]; - SK_PNMI_VCT VctBackup[SK_MAX_MACS]; - SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS]; -#ifdef SK_DIAG_SUPPORT - SK_U32 DiagAttached; -#endif /* SK_DIAG_SUPPORT */ -} SK_PNMI; - - -/* - * Function prototypes - */ -extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level); -extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf, - unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); -extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, - unsigned int *pLen, SK_U32 NetIndex); -extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, - unsigned int *pLen, SK_U32 NetIndex); -extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, - unsigned int *pLen, SK_U32 NetIndex); -extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, - SK_EVPARA Param); -extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, - unsigned int * pLen, SK_U32 NetIndex); - -#endif diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h deleted file mode 100644 index 3eec627..0000000 --- a/drivers/net/sk98lin/h/skgesirq.h +++ /dev/null @@ -1,110 +0,0 @@ -/****************************************************************************** - * - * Name: skgesirq.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.30 $ - * Date: $Date: 2003/07/04 12:34:13 $ - * Purpose: SK specific Gigabit Ethernet special IRQ functions - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef _INC_SKGESIRQ_H_ -#define _INC_SKGESIRQ_H_ - -/* Define return codes of SkGePortCheckUp and CheckShort */ -#define SK_HW_PS_NONE 0 /* No action needed */ -#define SK_HW_PS_RESTART 1 /* Restart needed */ -#define SK_HW_PS_LINK 2 /* Link Up actions needed */ - -/* - * Define the Event the special IRQ/INI module can handle - */ -#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */ -#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */ -#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */ -#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */ -#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */ -#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */ -#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */ -#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */ -#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */ -#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */ - -#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */ -#define SK_WA_INA_TIME (100000UL) /* 100 msec */ - -#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */ - -/* - * Define the error numbers and messages - */ -#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0) -#define SKERR_SIRQ_E001MSG "Unknown event" -#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1) -#define SKERR_SIRQ_E002MSG "Packet timeout RX1" -#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1) -#define SKERR_SIRQ_E003MSG "Packet timeout RX2" -#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1) -#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized" -#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1) -#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized" -#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1) -#define SKERR_SIRQ_E006MSG "CHECK failure R1" -#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1) -#define SKERR_SIRQ_E007MSG "CHECK failure R2" -#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1) -#define SKERR_SIRQ_E008MSG "CHECK failure XS1" -#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1) -#define SKERR_SIRQ_E009MSG "CHECK failure XA1" -#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1) -#define SKERR_SIRQ_E010MSG "CHECK failure XS2" -#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1) -#define SKERR_SIRQ_E011MSG "CHECK failure XA2" -#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1) -#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error" -#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1) -#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error" -#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1) -#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)" -#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1) -#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)" -#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1) -#define SKERR_SIRQ_E016MSG "Parity error MAC 1" -#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1) -#define SKERR_SIRQ_E017MSG "Parity error MAC 2" -#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1) -#define SKERR_SIRQ_E018MSG "Parity error RX 1" -#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1) -#define SKERR_SIRQ_E019MSG "Parity error RX 2" -#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1) -#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun" -#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1) -#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt" -#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1) -#define SKERR_SIRQ_E022MSG "Cable pair swap error" -#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1) -#define SKERR_SIRQ_E023MSG "Auto-negotiation error" -#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1) -#define SKERR_SIRQ_E024MSG "FIFO overflow error" -#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1) -#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected" - -extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus); -extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); -extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port); - -#endif /* _INC_SKGESIRQ_H_ */ diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h deleted file mode 100644 index 6a63f4a..0000000 --- a/drivers/net/sk98lin/h/ski2c.h +++ /dev/null @@ -1,174 +0,0 @@ -/****************************************************************************** - * - * Name: ski2c.h - * Project: Gigabit Ethernet Adapters, TWSI-Module - * Version: $Revision: 1.35 $ - * Date: $Date: 2003/10/20 09:06:30 $ - * Purpose: Defines to access Voltage and Temperature Sensor - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * SKI2C.H contains all I2C specific defines - */ - -#ifndef _SKI2C_H_ -#define _SKI2C_H_ - -typedef struct s_Sensor SK_SENSOR; - -#include "h/skgei2c.h" - -/* - * Define the I2C events. - */ -#define SK_I2CEV_IRQ 1 /* IRQ happened Event */ -#define SK_I2CEV_TIM 2 /* Timeout event */ -#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */ - -/* - * Define READ and WRITE Constants. - */ -#define I2C_READ 0 -#define I2C_WRITE 1 -#define I2C_BURST 1 -#define I2C_SINGLE 0 - -#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0) -#define SKERR_I2C_E001MSG "Sensor index unknown" -#define SKERR_I2C_E002 (SKERR_I2C_E001+1) -#define SKERR_I2C_E002MSG "TWSI: transfer does not complete" -#define SKERR_I2C_E003 (SKERR_I2C_E002+1) -#define SKERR_I2C_E003MSG "LM80: NAK on device send" -#define SKERR_I2C_E004 (SKERR_I2C_E003+1) -#define SKERR_I2C_E004MSG "LM80: NAK on register send" -#define SKERR_I2C_E005 (SKERR_I2C_E004+1) -#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send" -#define SKERR_I2C_E006 (SKERR_I2C_E005+1) -#define SKERR_I2C_E006MSG "Unknown event" -#define SKERR_I2C_E007 (SKERR_I2C_E006+1) -#define SKERR_I2C_E007MSG "LM80 read out of state" -#define SKERR_I2C_E008 (SKERR_I2C_E007+1) -#define SKERR_I2C_E008MSG "Unexpected sensor read completed" -#define SKERR_I2C_E009 (SKERR_I2C_E008+1) -#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range" -#define SKERR_I2C_E010 (SKERR_I2C_E009+1) -#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range" -#define SKERR_I2C_E011 (SKERR_I2C_E010+1) -#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range" -#define SKERR_I2C_E012 (SKERR_I2C_E011+1) -#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range" -#define SKERR_I2C_E013 (SKERR_I2C_E012+1) -#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor" -#define SKERR_I2C_E014 (SKERR_I2C_E013+1) -#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range" -#define SKERR_I2C_E015 (SKERR_I2C_E014+1) -#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range" -#define SKERR_I2C_E016 (SKERR_I2C_E015+1) -#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete" - -/* - * Define Timeout values - */ -#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */ -#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */ -#define SK_I2C_TIM_WATCH 1000000L /* 1 second */ - -/* - * Define trap and error log hold times - */ -#ifndef SK_SEN_ERR_TR_HOLD -#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC) -#endif -#ifndef SK_SEN_ERR_LOG_HOLD -#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC) -#endif -#ifndef SK_SEN_WARN_TR_HOLD -#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC) -#endif -#ifndef SK_SEN_WARN_LOG_HOLD -#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC) -#endif - -/* - * Defines for SenType - */ -#define SK_SEN_UNKNOWN 0 -#define SK_SEN_TEMP 1 -#define SK_SEN_VOLT 2 -#define SK_SEN_FAN 3 - -/* - * Define for the SenErrorFlag - */ -#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */ -#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */ -#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */ -#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */ -#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */ - -/* - * Define the Sensor struct - */ -struct s_Sensor { - char *SenDesc; /* Description */ - int SenType; /* Voltage or Temperature */ - SK_I32 SenValue; /* Current value of the sensor */ - SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */ - SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */ - SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */ - SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */ - int SenErrFlag; /* Sensor indicated an error */ - SK_BOOL SenInit; /* Is sensor initialized ? */ - SK_U64 SenErrCts; /* Error trap counter */ - SK_U64 SenWarnCts; /* Warning trap counter */ - SK_U64 SenBegErrTS; /* Begin error timestamp */ - SK_U64 SenBegWarnTS; /* Begin warning timestamp */ - SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */ - SK_U64 SenLastErrLogTS; /* Last error log timestamp */ - SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */ - SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */ - int SenState; /* Sensor State (see HW specific include) */ - int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen); - /* Sensors read function */ - SK_U16 SenReg; /* Register Address for this sensor */ - SK_U8 SenDev; /* Device Selection for this sensor */ -}; - -typedef struct s_I2c { - SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */ - int CurrSens; /* Which sensor is currently queried */ - int MaxSens; /* Max. number of sensors */ - int TimerMode; /* Use the timer also to watch the state machine */ - int InitLevel; /* Initialized Level */ -#ifndef SK_DIAG - int DummyReads; /* Number of non-checked dummy reads */ - SK_TIMER SenTimer; /* Sensors timer */ -#endif /* !SK_DIAG */ -} SK_I2C; - -extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level); -#ifdef SK_DIAG -extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg, - int Burst); -#else /* !SK_DIAG */ -extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); -extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC); -extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC); -#endif /* !SK_DIAG */ -#endif /* n_SKI2C_H */ - diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h deleted file mode 100644 index 2ec40d4..0000000 --- a/drivers/net/sk98lin/h/skqueue.h +++ /dev/null @@ -1,94 +0,0 @@ -/****************************************************************************** - * - * Name: skqueue.h - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.16 $ - * Date: $Date: 2003/09/16 12:50:32 $ - * Purpose: Defines for the Event queue - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * SKQUEUE.H contains all defines and types for the event queue - */ - -#ifndef _SKQUEUE_H_ -#define _SKQUEUE_H_ - - -/* - * define the event classes to be served - */ -#define SKGE_DRV 1 /* Driver Event Class */ -#define SKGE_RLMT 2 /* RLMT Event Class */ -#define SKGE_I2C 3 /* I2C Event Class */ -#define SKGE_PNMI 4 /* PNMI Event Class */ -#define SKGE_CSUM 5 /* Checksum Event Class */ -#define SKGE_HWAC 6 /* Hardware Access Event Class */ - -#define SKGE_SWT 9 /* Software Timer Event Class */ -#define SKGE_LACP 10 /* LACP Aggregation Event Class */ -#define SKGE_RSF 11 /* RSF Aggregation Event Class */ -#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */ -#define SKGE_FD 13 /* FD Distributor Event Class */ - -/* - * define event queue as circular buffer - */ -#define SK_MAX_EVENT 64 - -/* - * Parameter union for the Para stuff - */ -typedef union u_EvPara { - void *pParaPtr; /* Parameter Pointer */ - SK_U64 Para64; /* Parameter 64bit version */ - SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */ -} SK_EVPARA; - -/* - * Event Queue - * skqueue.c - * events are class/value pairs - * class is addressee, e.g. RLMT, PNMI etc. - * value is command, e.g. line state change, ring op change etc. - */ -typedef struct s_EventElem { - SK_U32 Class; /* Event class */ - SK_U32 Event; /* Event value */ - SK_EVPARA Para; /* Event parameter */ -} SK_EVENTELEM; - -typedef struct s_Queue { - SK_EVENTELEM EvQueue[SK_MAX_EVENT]; - SK_EVENTELEM *EvPut; - SK_EVENTELEM *EvGet; -} SK_QUEUE; - -extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level); -extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event, - SK_EVPARA Para); -extern int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc); - - -/* Define Error Numbers and messages */ -#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0) -#define SKERR_Q_E001MSG "Event queue overflow" -#define SKERR_Q_E002 (SKERR_Q_E001+1) -#define SKERR_Q_E002MSG "Undefined event class" -#endif /* _SKQUEUE_H_ */ - diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h deleted file mode 100644 index ca75dfd..0000000 --- a/drivers/net/sk98lin/h/skrlmt.h +++ /dev/null @@ -1,438 +0,0 @@ -/****************************************************************************** - * - * Name: skrlmt.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.37 $ - * Date: $Date: 2003/04/15 09:43:43 $ - * Purpose: Header file for Redundant Link ManagemenT. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This is the header file for Redundant Link ManagemenT. - * - * Include File Hierarchy: - * - * "skdrv1st.h" - * ... - * "sktypes.h" - * "skqueue.h" - * "skaddr.h" - * "skrlmt.h" - * ... - * "skdrv2nd.h" - * - ******************************************************************************/ - -#ifndef __INC_SKRLMT_H -#define __INC_SKRLMT_H - -#ifdef __cplusplus -extern "C" { -#endif /* cplusplus */ - -/* defines ********************************************************************/ - -#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */ -#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */ - -/* ----- Default queue sizes - must be multiples of 8 KB ----- */ - -/* Less than 8 KB free in RX queue => pause frames. */ -#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */ -#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */ -#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */ - -#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */ - -/* ----- PORT states ----- */ - -#define SK_RLMT_PS_INIT 0 /* Port state: Init. */ -#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */ -#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */ -#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */ -#define SK_RLMT_PS_UP 4 /* Port state: Up. */ - -/* ----- RLMT states ----- */ - -#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */ -#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */ -#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */ - -/* ----- PORT events ----- */ - -#define SK_RLMT_LINK_UP 1001 /* Link came up. */ -#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */ -#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */ - -/* ----- RLMT events ----- */ - -#define SK_RLMT_START 2001 /* Start RLMT. */ -#define SK_RLMT_STOP 2002 /* Stop RLMT. */ -#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */ -#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */ -#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */ -#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */ -#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */ -#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */ - -/* ----- RLMT mode bits ----- */ - -/* - * CAUTION: These defines are private to RLMT. - * Please use the RLMT mode defines below. - */ - -#define SK_RLMT_CHECK_LINK 1 /* Check Link. */ -#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */ -#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */ - -#ifndef RLMT_CHECK_REMOTE -#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK -#else /* RLMT_CHECK_REMOTE */ -#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */ -#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3 -#define SK_RLMT_CHECK_OTHERS \ - (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) -#endif /* RLMT_CHECK_REMOTE */ - -#ifndef SK_RLMT_ENABLE_TRANSPARENT -#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */ -#else /* SK_RLMT_ENABLE_TRANSPARENT */ -#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */ -#endif /* SK_RLMT_ENABLE_TRANSPARENT */ - -/* ----- RLMT modes ----- */ - -/* Check Link State. */ -#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK) - -/* Check Local Ports: check other links on the same adapter. */ -#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK) - -/* Check Local Ports and Segmentation Status. */ -#define SK_RLMT_MODE_CLPSS \ - (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG) - -#ifdef RLMT_CHECK_REMOTE -/* Check Local and Remote Ports: check links (local or remote). */ - Name of define TBD! -#define SK_RLMT_MODE_CRP \ - (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) - -/* Check Local and Remote Ports and Segmentation Status. */ - Name of define TBD! -#define SK_RLMT_MODE_CRPSS \ - (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \ - SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG) -#endif /* RLMT_CHECK_REMOTE */ - -/* ----- RLMT lookahead result bits ----- */ - -#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */ -#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */ - -/* Macros */ - -#if 0 -SK_AC *pAC /* adapter context */ -SK_U32 PortNum /* receiving port */ -unsigned PktLen /* received packet's length */ -SK_BOOL IsBc /* Flag: packet is broadcast */ -unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */ -unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */ -#endif /* 0 */ - -#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \ - SK_AC *_pAC; \ - SK_U32 _PortNum; \ - _pAC = (pAC); \ - _PortNum = (SK_U32)(PortNum); \ - /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \ - _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \ - if (_pAC->Rlmt.RlmtOff) { \ - *(pNumBytes) = 0; \ - } \ - else {\ - if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ - *(pNumBytes) = 0; \ - } \ - else if (IsBc) { \ - if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ - *(pNumBytes) = 6; \ - *(pOffset) = 6; \ - } \ - else { \ - *(pNumBytes) = 0; \ - } \ - } \ - else { \ - if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ - /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ - *(pNumBytes) = 0; \ - } \ - else { \ - *(pNumBytes) = 6; \ - *(pOffset) = 0; \ - } \ - } \ - } \ -} - -#if 0 -SK_AC *pAC /* adapter context */ -SK_U32 PortNum /* receiving port */ -SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */ -SK_BOOL IsBc /* Flag: packet is broadcast */ -SK_BOOL IsMc /* Flag: packet is multicast */ -unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */ -SK_RLMT_LOOKAHEAD() expects *pNumBytes from -packet offset *pOffset (s.a.) at *pLaPacket. - -If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is -BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler -can trash unneeded parts of the if construction. -#endif /* 0 */ - -#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \ - SK_AC *_pAC; \ - SK_U32 _PortNum; \ - SK_U8 *_pLaPacket; \ - _pAC = (pAC); \ - _PortNum = (SK_U32)(PortNum); \ - _pLaPacket = (SK_U8 *)(pLaPacket); \ - if (IsBc) {\ - if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \ - _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \ - _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \ - _pAC->Rlmt.CheckSwitch = SK_TRUE; \ - } \ - /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ - *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ - } \ - else if (IsMc) { \ - if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \ - _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \ - if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \ - *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \ - } \ - else { \ - *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ - } \ - } \ - else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \ - *(pForRlmt) = SK_RLMT_RX_RLMT; \ - } \ - else { \ - /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ - *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ - } \ - } \ - else { \ - if (SK_ADDR_EQUAL( \ - _pLaPacket, \ - _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \ - *(pForRlmt) = SK_RLMT_RX_RLMT; \ - } \ - else { \ - /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ - *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ - } \ - } \ -} - -#ifdef SK_RLMT_FAST_LOOKAHEAD -Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead. -#endif /* SK_RLMT_FAST_LOOKAHEAD */ -#ifdef SK_RLMT_SLOW_LOOKAHEAD -Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead. -#endif /* SK_RLMT_SLOW_LOOKAHEAD */ - -/* typedefs *******************************************************************/ - -#ifdef SK_RLMT_MBUF_PRIVATE -typedef struct s_RlmtMbuf { - some content -} SK_RLMT_MBUF; -#endif /* SK_RLMT_MBUF_PRIVATE */ - - -#ifdef SK_LA_INFO -typedef struct s_Rlmt_PacketInfo { - unsigned PacketLength; /* Length of packet. */ - unsigned PacketType; /* Directed/Multicast/Broadcast. */ -} SK_RLMT_PINFO; -#endif /* SK_LA_INFO */ - - -typedef struct s_RootId { - SK_U8 Id[8]; /* Root Bridge Id. */ -} SK_RLMT_ROOT_ID; - - -typedef struct s_port { - SK_MAC_ADDR CheckAddr; - SK_BOOL SuspectTx; -} SK_PORT_CHECK; - - -typedef struct s_RlmtNet SK_RLMT_NET; - - -typedef struct s_RlmtPort { - -/* ----- Public part (read-only) ----- */ - - SK_U8 PortState; /* Current state of this port. */ - - /* For PNMI */ - SK_BOOL LinkDown; - SK_BOOL PortDown; - SK_U8 Align01; - - SK_U32 PortNumber; /* Number of port on adapter. */ - SK_RLMT_NET * Net; /* Net port belongs to. */ - - SK_U64 TxHelloCts; - SK_U64 RxHelloCts; - SK_U64 TxSpHelloReqCts; - SK_U64 RxSpHelloCts; - -/* ----- Private part ----- */ - -/* SK_U64 PacketsRx; */ /* Total packets received. */ - SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */ -/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */ - SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */ - SK_U64 BcTimeStamp; /* Time of last BC receive. */ - SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */ - - SK_TIMER UpTimer; /* Timer struct Link/Port up. */ - SK_TIMER DownRxTimer; /* Timer struct down rx. */ - SK_TIMER DownTxTimer; /* Timer struct down tx. */ - - SK_U32 CheckingState; /* Checking State. */ - - SK_ADDR_PORT * AddrPort; - - SK_U8 Random[4]; /* Random value. */ - unsigned PortsChecked; /* #ports checked. */ - unsigned PortsSuspect; /* #ports checked that are s. */ - SK_PORT_CHECK PortCheck[1]; -/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */ - - SK_BOOL PortStarted; /* Port is started. */ - SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */ - SK_BOOL RootIdSet; - SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ -} SK_RLMT_PORT; - - -struct s_RlmtNet { - -/* ----- Public part (read-only) ----- */ - - SK_U32 NetNumber; /* Number of net. */ - - SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */ - SK_U32 NumPorts; /* Number of ports. */ - SK_U32 PrefPort; /* Preferred port. */ - - /* For PNMI */ - - SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */ - SK_U32 RlmtMode; /* Check ... */ - SK_U32 ActivePort; /* Active port. */ - SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */ - - SK_U8 RlmtState; /* Current RLMT state. */ - -/* ----- Private part ----- */ - SK_BOOL RootIdSet; - SK_U16 Align01; - - int LinksUp; /* #Links up. */ - int PortsUp; /* #Ports up. */ - SK_U32 TimeoutValue; /* RLMT timeout value. */ - - SK_U32 CheckingState; /* Checking State. */ - SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ - - SK_TIMER LocTimer; /* Timer struct. */ - SK_TIMER SegTimer; /* Timer struct. */ -}; - - -typedef struct s_Rlmt { - -/* ----- Public part (read-only) ----- */ - - SK_U32 NumNets; /* Number of nets. */ - SK_U32 NetsStarted; /* Number of nets started. */ - SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */ - SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */ - -/* ----- Private part ----- */ - SK_BOOL CheckSwitch; - SK_BOOL RlmtOff; /* set to zero if the Mac addresses - are equal or the second one - is zero */ - SK_U16 Align01; - -} SK_RLMT; - - -extern SK_MAC_ADDR BridgeMcAddr; -extern SK_MAC_ADDR SkRlmtMcAddr; - -/* function prototypes ********************************************************/ - - -#ifndef SK_KR_PROTO - -/* Functions provided by SkRlmt */ - -/* ANSI/C++ compliant function prototypes */ - -extern void SkRlmtInit( - SK_AC *pAC, - SK_IOC IoC, - int Level); - -extern int SkRlmtEvent( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 Event, - SK_EVPARA Para); - -#else /* defined(SK_KR_PROTO) */ - -/* Non-ANSI/C++ compliant function prototypes */ - -#error KR-style function prototypes are not yet provided. - -#endif /* defined(SK_KR_PROTO)) */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_SKRLMT_H */ diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h deleted file mode 100644 index 04e6d7c..0000000 --- a/drivers/net/sk98lin/h/sktimer.h +++ /dev/null @@ -1,63 +0,0 @@ -/****************************************************************************** - * - * Name: sktimer.h - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.11 $ - * Date: $Date: 2003/09/16 12:58:18 $ - * Purpose: Defines for the timer functions - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * SKTIMER.H contains all defines and types for the timer functions - */ - -#ifndef _SKTIMER_H_ -#define _SKTIMER_H_ - -#include "h/skqueue.h" - -/* - * SK timer - * - needed wherever a timer is used. Put this in your data structure - * wherever you want. - */ -typedef struct s_Timer SK_TIMER; - -struct s_Timer { - SK_TIMER *TmNext; /* linked list */ - SK_U32 TmClass; /* Timer Event class */ - SK_U32 TmEvent; /* Timer Event value */ - SK_EVPARA TmPara; /* Timer Event parameter */ - SK_U32 TmDelta; /* delta time */ - int TmActive; /* flag: active/inactive */ -}; - -/* - * Timer control struct. - * - use in Adapters context name pAC->Tim - */ -typedef struct s_TimCtrl { - SK_TIMER *StQueue; /* Head of Timer queue */ -} SK_TIMCTRL; - -extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level); -extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer); -extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer, - SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para); -extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc); -#endif /* _SKTIMER_H_ */ diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h deleted file mode 100644 index 40edc96..0000000 --- a/drivers/net/sk98lin/h/sktypes.h +++ /dev/null @@ -1,69 +0,0 @@ -/****************************************************************************** - * - * Name: sktypes.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.2 $ - * Date: $Date: 2003/10/07 08:16:51 $ - * Purpose: Define data types for Linux - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * In this file, all data types that are needed by the common modules - * are mapped to Linux data types. - * - * - * Include File Hierarchy: - * - * - ******************************************************************************/ - -#ifndef __INC_SKTYPES_H -#define __INC_SKTYPES_H - - -/* defines *******************************************************************/ - -/* - * Data types with a specific size. 'I' = signed, 'U' = unsigned. - */ -#define SK_I8 s8 -#define SK_U8 u8 -#define SK_I16 s16 -#define SK_U16 u16 -#define SK_I32 s32 -#define SK_U32 u32 -#define SK_I64 s64 -#define SK_U64 u64 - -#define SK_UPTR ulong /* casting pointer <-> integral */ - -/* -* Boolean type. -*/ -#define SK_BOOL SK_U8 -#define SK_FALSE 0 -#define SK_TRUE (!SK_FALSE) - -/* typedefs *******************************************************************/ - -/* function prototypes ********************************************************/ - -#endif /* __INC_SKTYPES_H */ diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h deleted file mode 100644 index a1a7294..0000000 --- a/drivers/net/sk98lin/h/skversion.h +++ /dev/null @@ -1,38 +0,0 @@ -/****************************************************************************** - * - * Name: version.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.5 $ - * Date: $Date: 2003/10/07 08:16:51 $ - * Purpose: SK specific Error log support - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifdef lint -static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH."; -static const char SysKonnectBuildNumber[] = - "@(#)SK-BUILD: 6.23 PL: 01"; -#endif /* !defined(lint) */ - -#define BOOT_STRING "sk98lin: Network Device Driver v6.23\n" \ - "(C)Copyright 1999-2004 Marvell(R)." - -#define VER_STRING "6.23" -#define DRIVER_FILE_NAME "sk98lin" -#define DRIVER_REL_DATE "Feb-13-2004" - - diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h deleted file mode 100644 index fdd9e48..0000000 --- a/drivers/net/sk98lin/h/skvpd.h +++ /dev/null @@ -1,248 +0,0 @@ -/****************************************************************************** - * - * Name: skvpd.h - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.15 $ - * Date: $Date: 2003/01/13 10:39:38 $ - * Purpose: Defines and Macros for VPD handling - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2003 SysKonnect GmbH. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * skvpd.h contains Diagnostic specific defines for VPD handling - */ - -#ifndef __INC_SKVPD_H_ -#define __INC_SKVPD_H_ - -/* - * Define Resource Type Identifiers and VPD keywords - */ -#define RES_ID 0x82 /* Resource Type ID String (Product Name) */ -#define RES_VPD_R 0x90 /* start of VPD read only area */ -#define RES_VPD_W 0x91 /* start of VPD read/write area */ -#define RES_END 0x78 /* Resource Type End Tag */ - -#ifndef VPD_NAME -#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */ -#endif /* VPD_NAME */ -#define VPD_PN "PN" /* Adapter Part Number */ -#define VPD_EC "EC" /* Adapter Engineering Level */ -#define VPD_MN "MN" /* Manufacture ID */ -#define VPD_SN "SN" /* Serial Number */ -#define VPD_CP "CP" /* Extended Capability */ -#define VPD_RV "RV" /* Checksum and Reserved */ -#define VPD_YA "YA" /* Asset Tag Identifier */ -#define VPD_VL "VL" /* First Error Log Message (SK specific) */ -#define VPD_VF "VF" /* Second Error Log Message (SK specific) */ -#define VPD_RW "RW" /* Remaining Read / Write Area */ - -/* 'type' values for vpd_setup_para() */ -#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */ -#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */ - -/* 'op' values for vpd_setup_para() */ -#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */ -#define OWR_KEY 2 /* overwrite key if already exists */ - -/* - * Define READ and WRITE Constants. - */ - -#define VPD_DEV_ID_GENESIS 0x4300 - -#define VPD_SIZE_YUKON 256 -#define VPD_SIZE_GENESIS 512 -#define VPD_SIZE 512 -#define VPD_READ 0x0000 -#define VPD_WRITE 0x8000 - -#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE) - -#define VPD_GET_RES_LEN(p) ((unsigned int) \ - (* (SK_U8 *)&(p)[1]) |\ - ((* (SK_U8 *)&(p)[2]) << 8)) -#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2])) -#define VPD_GET_VAL(p) ((char *)&(p)[3]) - -#define VPD_MAX_LEN 50 - -/* VPD status */ - /* bit 7..1 reserved */ -#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */ - /* and vpd_free_rw valid */ - -/* - * VPD structs - */ -typedef struct s_vpd_status { - unsigned short Align01; /* Alignment */ - unsigned short vpd_status; /* VPD status, description see above */ - int vpd_free_ro; /* unused bytes in read only area */ - int vpd_free_rw; /* bytes available in read/write area */ -} SK_VPD_STATUS; - -typedef struct s_vpd { - SK_VPD_STATUS v; /* VPD status structure */ - char vpd_buf[VPD_SIZE]; /* VPD buffer */ - int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */ - int vpd_size; /* saved VPD-size */ -} SK_VPD; - -typedef struct s_vpd_para { - unsigned int p_len; /* parameter length */ - char *p_val; /* points to the value */ -} SK_VPD_PARA; - -/* - * structure of Large Resource Type Identifiers - */ - -/* was removed because of alignment problems */ - -/* - * structure of VPD keywords - */ -typedef struct s_vpd_key { - char p_key[2]; /* 2 bytes ID string */ - unsigned char p_len; /* 1 byte length */ - char p_val; /* start of the value string */ -} SK_VPD_KEY; - - -/* - * System specific VPD macros - */ -#ifndef SKDIAG -#ifndef VPD_DO_IO -#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) -#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) -#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) -#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) -#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) -#else /* VPD_DO_IO */ -#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) -#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) -#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) -#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) -#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) -#endif /* VPD_DO_IO */ -#else /* SKDIAG */ -#define VPD_OUT8(pAC,Ioc,Addr,Val) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciWriteCfgByte(pAC,Addr,Val); \ - else \ - SK_OUT8(pAC,PCI_C(Addr),Val); \ - } -#define VPD_OUT16(pAC,Ioc,Addr,Val) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciWriteCfgWord(pAC,Addr,Val); \ - else \ - SK_OUT16(pAC,PCI_C(Addr),Val); \ - } -#define VPD_IN8(pAC,Ioc,Addr,pVal) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciReadCfgByte(pAC,Addr,pVal); \ - else \ - SK_IN8(pAC,PCI_C(Addr),pVal); \ - } -#define VPD_IN16(pAC,Ioc,Addr,pVal) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciReadCfgWord(pAC,Addr,pVal); \ - else \ - SK_IN16(pAC,PCI_C(Addr),pVal); \ - } -#define VPD_IN32(pAC,Ioc,Addr,pVal) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciReadCfgDWord(pAC,Addr,pVal); \ - else \ - SK_IN32(pAC,PCI_C(Addr),pVal); \ - } -#endif /* nSKDIAG */ - -/* function prototypes ********************************************************/ - -#ifndef SK_KR_PROTO -#ifdef SKDIAG -extern SK_U32 VpdReadDWord( - SK_AC *pAC, - SK_IOC IoC, - int addr); -#endif /* SKDIAG */ - -extern SK_VPD_STATUS *VpdStat( - SK_AC *pAC, - SK_IOC IoC); - -extern int VpdKeys( - SK_AC *pAC, - SK_IOC IoC, - char *buf, - int *len, - int *elements); - -extern int VpdRead( - SK_AC *pAC, - SK_IOC IoC, - const char *key, - char *buf, - int *len); - -extern SK_BOOL VpdMayWrite( - char *key); - -extern int VpdWrite( - SK_AC *pAC, - SK_IOC IoC, - const char *key, - const char *buf); - -extern int VpdDelete( - SK_AC *pAC, - SK_IOC IoC, - char *key); - -extern int VpdUpdate( - SK_AC *pAC, - SK_IOC IoC); - -#ifdef SKDIAG -extern int VpdReadBlock( - SK_AC *pAC, - SK_IOC IoC, - char *buf, - int addr, - int len); - -extern int VpdWriteBlock( - SK_AC *pAC, - SK_IOC IoC, - char *buf, - int addr, - int len); -#endif /* SKDIAG */ -#else /* SK_KR_PROTO */ -extern SK_U32 VpdReadDWord(); -extern SK_VPD_STATUS *VpdStat(); -extern int VpdKeys(); -extern int VpdRead(); -extern SK_BOOL VpdMayWrite(); -extern int VpdWrite(); -extern int VpdDelete(); -extern int VpdUpdate(); -#endif /* SK_KR_PROTO */ - -#endif /* __INC_SKVPD_H_ */ diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h deleted file mode 100644 index 7f8e6d0..0000000 --- a/drivers/net/sk98lin/h/xmac_ii.h +++ /dev/null @@ -1,1579 +0,0 @@ -/****************************************************************************** - * - * Name: xmac_ii.h - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.52 $ - * Date: $Date: 2003/10/02 16:35:50 $ - * Purpose: Defines and Macros for Gigabit Ethernet Controller - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifndef __INC_XMAC_H -#define __INC_XMAC_H - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines ********************************************************************/ - -/* - * XMAC II registers - * - * The XMAC registers are 16 or 32 bits wide. - * The XMACs host processor interface is set to 16 bit mode, - * therefore ALL registers will be addressed with 16 bit accesses. - * - * The following macros are provided to access the XMAC registers - * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(), - * XM_INHASH(), and XM_OUTHASH(). - * The macros are defined in SkGeHw.h. - * - * Note: NA reg = Network Address e.g DA, SA etc. - * - */ -#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */ - /* 0x0004: reserved */ -#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */ -#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/ -#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */ -#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */ - /* 0x0018 - 0x001e: reserved */ -#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */ -#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */ -#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */ -#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */ -#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */ -#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */ -#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */ - /* 0x003c: reserved */ -#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */ -#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */ -#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */ -#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */ - /* 0x0050 - 0x005e: reserved */ -#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */ -#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */ -#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */ -#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */ -#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */ - /* 0x006e: reserved */ -#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */ -#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */ -#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/ -#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */ - - /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */ - /* use the XM_EXM() macro to address */ -#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */ - - /* - * XM_EXM(Reg) - * - * returns the XMAC address offset of specified Exact Match Addr Reg - * - * para: Reg EXM register to addr (0 .. 15) - * - * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]); - */ -#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3)) - -#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */ -#define XM_SA 0x0108 /* NA reg r/w Station Address Register */ -#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */ -#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */ -#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */ -#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */ -#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */ -#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */ -#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */ - /* 0x012e: reserved */ -#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */ -#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */ - /* 0x0138 - 0x01fe: reserved */ -#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */ -#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */ -#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */ -#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */ -#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */ - /* 0x0204 - 0x027e: reserved */ -#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */ -#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/ -#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */ -#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */ -#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */ -#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */ -#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */ -#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */ -#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ -#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */ -#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */ -#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */ -#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */ -#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */ -#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */ -#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */ -#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */ -#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */ -#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */ - /* 0x02cc - 0x02ce: reserved */ -#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */ -#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */ -#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */ -#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */ -#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ -#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ - /* 0x02e8 - 0x02fe: reserved */ -#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */ -#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */ -#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/ -#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */ -#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */ -#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */ -#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ -#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */ -#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */ -#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ -#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */ -#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */ -#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */ -#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */ -#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */ -#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */ -#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */ -#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */ -#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */ -#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */ -#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */ -#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ - /* 0x0358 - 0x035a: reserved */ -#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ -#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */ - /* 0x0364 - 0x0366: reserved */ -#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */ -#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */ -#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */ -#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */ -#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ -#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ - /* 0x02e8 - 0x02fe: reserved */ - - -/*----------------------------------------------------------------------------*/ -/* - * XMAC Bit Definitions - * - * If the bit access behaviour differs from the register access behaviour - * (r/w, r/o) this is documented after the bit number. - * The following bit access behaviours are used: - * (sc) self clearing - * (ro) read only - */ - -/* XM_MMU_CMD 16 bit r/w MMU Command Register */ - /* Bit 15..13: reserved */ -#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */ -#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */ -#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */ -#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */ - /* Bit 8: reserved */ -#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */ -#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */ -#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */ -#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */ -#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */ -#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */ -#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */ -#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */ - - -/* XM_TX_CMD 16 bit r/w Transmit Command Register */ - /* Bit 15..7: reserved */ -#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ -#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */ -#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */ -#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */ -#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */ -#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */ -#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */ - - -/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ - /* Bit 15..5: reserved */ -#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ - - -/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ - /* Bit 15..7: reserved */ -#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ - - -/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ - /* Bit 15..8: reserved */ -#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ - - -/* XM_RX_CMD 16 bit r/w Receive Command Register */ - /* Bit 15..9: reserved */ -#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */ - /* inrange error packets */ -#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */ - /* jumbo packets */ -#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */ -#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */ -#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */ -#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ -#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */ -#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */ -#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */ - - -/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ - /* Bit 15..5: reserved */ -#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ - - -/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ - /* Bit 31..7: reserved */ -#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */ -#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */ - /* Bit 4: reserved */ -#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */ -#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */ - /* Bit 1: reserved */ -#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */ - - -/* XM_IMSK 16 bit r/w Interrupt Mask Register */ -/* XM_ISRC 16 bit r/o Interrupt Status Register */ - /* Bit 15: reserved */ -#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */ -#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */ -#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */ -#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */ -#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */ -#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */ -#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */ -#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */ -#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */ -#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */ -#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */ -#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */ -#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */ -#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */ -#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */ - -#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\ - XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR)) - - -/* XM_HW_CFG 16 bit r/w Hardware Config Register */ - /* Bit 15.. 4: reserved */ -#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */ -#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/ - /* Bit 1: reserved */ -#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */ - - -/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ -/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ - /* Bit 15..10 reserved */ -#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ - -/* XM_TX_THR 16 bit r/w Tx Request Threshold */ -/* XM_HT_THR 16 bit r/w Host Request Threshold */ -/* XM_RX_THR 16 bit r/w Rx Request Threshold */ - /* Bit 15..11 reserved */ -#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ - - -/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ -#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */ -#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */ -#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */ -#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */ -#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */ -#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/ -#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */ -#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */ -#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */ -#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */ -#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */ -#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */ -#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */ -#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */ -#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */ - -/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ -/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ - /* Bit 15..11: reserved */ -#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ - - -/* XM_DEV_ID 32 bit r/o Device ID Register */ -#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ -#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ - - -/* XM_MODE 32 bit r/w Mode Register */ - /* Bit 31..27: reserved */ -#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */ -#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */ - /* extern generated */ -#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */ -#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */ - /* intern generated */ -#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */ -#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */ -#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */ -#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */ -#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */ - /* intern generated */ -#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */ - /* intern generated */ -#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */ -#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */ -#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */ -#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */ -#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */ -#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */ -#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */ -#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */ -#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */ -#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */ -#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */ -#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */ -#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */ -#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */ -#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */ -#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */ -#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */ - -#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) -#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ - XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) - -/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ - /* Bit 16..6: reserved */ -#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */ -#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */ -#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ -#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */ -#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */ -#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */ - - -/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ -/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ -#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ -#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/ -#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/ -#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/ -#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */ -#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */ -#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */ -#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */ -#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */ - /* Bit 22: reserved */ -#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */ -#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/ -#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */ -#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/ -#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */ - /* Bit 16: reserved */ -#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */ -#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */ -#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ -#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */ -#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */ -#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */ -#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/ -#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */ -#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ -#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ -#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/ -#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */ -#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */ -#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/ -#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/ -#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */ - -#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) - -/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ -/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ - /* Bit 31..26: reserved */ -#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ -#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/ -#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/ -#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/ -#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */ -#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */ -#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */ -#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */ -#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/ -#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ -#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */ -#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */ -#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */ -#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/ -#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */ -#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */ -#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/ -#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ -#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */ -#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */ -#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */ -#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */ -#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */ -#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/ -#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/ -#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */ - -#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) - -/* - * Receive Frame Status Encoding - */ -#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */ -#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/ -#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/ -#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */ -#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */ -#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */ - /* Bit 12: reserved */ -#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */ -#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */ -#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */ -#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */ -#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */ -#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */ -#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */ -#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */ -#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */ -#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */ -#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */ -#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */ - -/* - * XMR_FS_ERR will be set if - * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, - * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR - * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue - * XMR_FS_ERR unless the corresponding bit in the Receive Command - * Register is set. - */ -#define XMR_FS_ANY_ERR XMR_FS_ERR - -/*----------------------------------------------------------------------------*/ -/* - * XMAC-PHY Registers, indirect addressed over the XMAC - */ -#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */ -#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */ -#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ -#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ -#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ -#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */ -#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ -#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */ -#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ - /* 0x09 - 0x0e: reserved */ -#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */ -#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */ - -/*----------------------------------------------------------------------------*/ -/* - * Broadcom-PHY Registers, indirect addressed over XMAC - */ -#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */ -#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */ -#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ -#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ -#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ -#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ -#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ -#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */ -#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ - /* Broadcom-specific registers */ -#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ -#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ - /* 0x0b - 0x0e: reserved */ -#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ -#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */ -#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */ -#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */ -#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carrier Sense Cnt */ -#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */ - /* 0x15 - 0x17: reserved */ -#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */ -#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */ -#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */ -#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */ - /* 0x1c: reserved */ - /* 0x1d - 0x1f: test registers */ - -/*----------------------------------------------------------------------------*/ -/* - * Marvel-PHY Registers, indirect addressed over GMAC - */ -#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ -#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ -#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ -#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ -#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ -#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ -#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ -#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ -#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ - /* Marvel-specific registers */ -#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ -#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ - /* 0x0b - 0x0e: reserved */ -#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ -#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */ -#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */ -#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ -#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ -#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ -#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ -#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ - /* 0x17: reserved */ -#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ -#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ -#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ -#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ -#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ - /* 0x1d - 0x1f: reserved */ - -/*----------------------------------------------------------------------------*/ -/* - * Level One-PHY Registers, indirect addressed over XMAC - */ -#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */ -#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */ -#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ -#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ -#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ -#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ -#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ -#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */ -#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ - /* Level One-specific registers */ -#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/ -#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ - /* 0x0b -0x0e: reserved */ -#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ -#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/ -#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */ -#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */ -#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ -#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */ -#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */ -#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */ - /* 0x17 -0x1c: reserved */ - -/*----------------------------------------------------------------------------*/ -/* - * National-PHY Registers, indirect addressed over XMAC - */ -#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */ -#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */ -#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ -#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ -#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ -#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */ -#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ -#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */ -#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */ - /* National-specific registers */ -#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ -#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ - /* 0x0b -0x0e: reserved */ -#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */ -#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */ -#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */ -#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */ -#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */ -#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */ - /* 0x15 -0x18: reserved */ -#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */ - - -/*----------------------------------------------------------------------------*/ - -/* - * PHY bit definitions - * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are - * XMAC/Broadcom/LevelOne/National/Marvell-specific. - * All other are general. - */ - -/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/ -/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/ -/***** PHY_MARV_CTRL 16 bit r/w PHY Status Register *****/ -/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/ -#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ -#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ -#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */ -#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ -#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */ -#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */ -#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ -#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ -#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */ -#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */ - /* Bit 5..0: reserved */ - -#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ -#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ -#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ - - -/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/ -/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/ -/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/ -/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/ - /* Bit 15..9: reserved */ - /* (BC/L1) 100/10 Mbps cap bits ignored*/ -#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ - /* Bit 7: reserved */ -#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */ -#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ -#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ -#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ -#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ -#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */ -#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ - - -/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */ -/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */ -/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */ -/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */ -#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ -#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ -#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */ - -/* different Broadcom PHY Ids */ -#define PHY_BCOM_ID1_A1 0x6041 -#define PHY_BCOM_ID1_B2 0x6043 -#define PHY_BCOM_ID1_C0 0x6044 -#define PHY_BCOM_ID1_C5 0x6047 - - -/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ -/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */ -#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */ -#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */ - /* Bit 11.. 9: reserved */ -#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */ -#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */ -#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */ - /* Bit 4.. 0: reserved */ - -/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ -/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ - /* Bit 14: reserved */ -#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */ - /* Bit 12: reserved */ -#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ -#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */ - /* Bit 9..5: 100/10 BT cap bits ingnored */ -#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ - -/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ -/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ - /* Bit 14: reserved */ -#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */ - /* Bit 12: reserved */ -#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ -#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */ - /* Bit 9..5: 100/10 BT cap bits ingnored */ -#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ - -/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ -/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ - /* Bit 14: reserved */ -#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */ - /* Bit 12: reserved */ -#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */ -#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */ - /* Bit 9..5: 100/10 BT cap bits ingnored */ -#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ - -/* field type definition for PHY_x_AN_SEL */ -#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */ - -/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ - /* Bit 15..4: reserved */ -#define PHY_ANE_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */ -#define PHY_ANE_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */ -#define PHY_ANE_RX_PG (1<<1) /* Bit 1: Page Received */ - /* Bit 0: reserved */ - -/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ -/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ -/***** PHY_MARV_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ - /* Bit 15..5: reserved */ -#define PHY_ANE_PAR_DF (1<<4) /* Bit 4: Parallel Detection Fault */ -/* PHY_ANE_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ -/* PHY_ANE_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ -/* PHY_ANE_RX_PG (see XMAC) Bit 1: Page Received */ -#define PHY_ANE_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ - -/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/ -/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/ -/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/ -/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/ -/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/ -/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/ -#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */ -#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack1, for receiving a message */ -#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */ -#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack2, comply with msg content */ -#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */ -#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */ - -/* - * XMAC-Specific - */ -/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/ -#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */ -#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */ - /* Bit 13..0: reserved */ - -/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/ - /* Bit 15..9: reserved */ -#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */ -#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */ -#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */ -#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */ -#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability mismatch */ - /* Bit 2..0: reserved */ -/* - * Remote Fault Bits (PHY_X_AN_RFB) encoding - */ -#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */ -#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */ -#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */ -#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */ - -/* - * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding - */ -#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */ -#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */ -#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */ -#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */ - - -/* - * Broadcom-Specific - */ -/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ -#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ -#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ -#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ -#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ -#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ - /* Bit 7..0: reserved */ - -/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ -#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ -#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ -#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ -#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ -#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ - /* Bit 9..8: reserved */ -#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ - -/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ -#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ -#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ -#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ -#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ - /* Bit 11..0: reserved */ - -/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ -#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */ -#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */ -#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ -#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */ -#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */ -#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */ -#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */ -#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */ -#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */ -#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */ -#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */ -#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */ -#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */ -#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */ -#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */ -#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */ - -/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ - /* Bit 15..14: reserved */ -#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */ -#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */ -#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */ -#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */ -#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */ -#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */ -#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */ -#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */ -#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */ -#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */ -#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */ -#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */ -#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */ -#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */ - -/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ - /* Bit 15..8: reserved */ -#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */ - -/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ -#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */ -#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */ - -/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ -#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */ -#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */ -#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */ - /* Bit 11: reserved */ -#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */ - /* Bit 9.. 8: reserved */ -#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */ - /* Bit 6: reserved */ -#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */ - /* Bit 4: reserved */ -#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */ - /* Bit 2.. 0: reserved */ - -/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ -#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */ -#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */ -#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */ -#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */ -#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */ -#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */ -#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */ -#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */ -#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */ -#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */ -#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */ -#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */ -#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */ -#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */ - -#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) - -/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ -/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ - /* Bit 15: reserved */ -#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */ -#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */ -#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */ -#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */ -#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */ -#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */ -#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */ -#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */ -#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */ -#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */ -#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */ -#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */ -#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */ -#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */ -#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */ - -#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) - -/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ -#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ -#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ -#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ -#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ - -/* - * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) - */ -#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */ -#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */ -/* others: 100/10: invalid for us */ - -/* - * Level One-Specific - */ -/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ -#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ -#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ -#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ -#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ -#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ - /* Bit 7..0: reserved */ - -/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ -#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ -#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ -#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ -#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ -#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ - /* Bit 9..8: reserved */ -#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ - -/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ -#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ -#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ -#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ -#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ - /* Bit 11..0: reserved */ - -/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ -#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */ - /* Bit 14: reserved */ -#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ -#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */ -#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */ -#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */ -#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */ -#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */ -#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */ -#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */ -#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */ -#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */ -#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */ -#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */ -#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */ -#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */ - -/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ -#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */ -#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */ -#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */ -#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */ -#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */ -#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */ -#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */ -#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */ -#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */ -#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */ -#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */ -#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */ -#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */ - -/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ -/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ - /* Bit 15..14: reserved */ -#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */ - /* Bit 12: not described */ -#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */ -#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used */ -#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade */ -#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */ -#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */ -#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */ -#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */ -#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */ -#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */ -#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */ -#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */ -#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */ - -/* int. mask */ -#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) - -/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ -#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */ -#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */ -#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */ -#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */ -#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */ -#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */ -#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */ -#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */ -#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */ - -/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ -#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */ - /* Bit 14: reserved */ -#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */ -#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */ - /* Bit 11: reserved */ -#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/ - /* Bit 9..0: not described */ - -/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ -#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */ -#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */ - - -/* - * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding - */ -#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ -#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ -#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ -#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ - - -/* - * National-Specific - */ -/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ -#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ -#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ -#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ -#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ -#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ -#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */ - /* Bit 6..0: reserved */ - -/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ -#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ -#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ -#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/ -#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ -#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ -#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */ - /* Bit 8: reserved */ -#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ - -/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ -#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ -#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ -#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ -#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ - /* Bit 11..0: reserved */ - -/* todo: those are still missing */ -/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/ -/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/ -/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/ -/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/ -/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/ -/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/ - -/* - * Marvell-Specific - */ -/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ -/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ -#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ -#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ -#define PHY_M_AN_RF BIT_13 /* Remote Fault */ - /* Bit 12: reserved */ -#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ -#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ -#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ -#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ -#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ -#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ - -/* special defines for FIBER (88E1011S only) */ -#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ -#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ -#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ -#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ - -/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ -#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ -#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ -#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ -#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ - -/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ -#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */ -#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */ -#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */ -#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ -#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ - /* Bit 7..0: reserved */ - -/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ -#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ -#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ -#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */ -#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */ -#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ -#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */ -#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ -#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */ -#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */ -#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */ -#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */ -#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ - -#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ -#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ - -#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) -#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ -#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ -#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ - -/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ -#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ -#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */ -#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */ -#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ -#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */ -#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */ -#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */ -#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */ -#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */ -#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */ -#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */ -#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */ -#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */ -#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */ -#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */ -#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */ - -#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) - -/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ -/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ -#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */ -#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */ -#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */ -#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */ -#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */ -#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */ -#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */ -#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */ -#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */ -#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */ -#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */ -#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */ - /* Bit 3..2: reserved */ -#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */ -#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */ - -#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ - PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) - -/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ -#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */ -#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */ -#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ -#define PHY_M_EC_FIB_AN_ENA (1<<3) /* Bit 3: Fiber Auto-Neg. Enable */ - -#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */ -#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */ -#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */ - -#define MAC_TX_CLK_0_MHZ 2 -#define MAC_TX_CLK_2_5_MHZ 6 -#define MAC_TX_CLK_25_MHZ 7 - -/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ -#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */ -#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ -#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */ -#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ - /* Bit 7.. 5: reserved */ -#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ -#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */ -#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */ -#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */ - -#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */ - -#define PULS_NO_STR 0 /* no pulse stretching */ -#define PULS_21MS 1 /* 21 ms to 42 ms */ -#define PULS_42MS 2 /* 42 ms to 84 ms */ -#define PULS_84MS 3 /* 84 ms to 170 ms */ -#define PULS_170MS 4 /* 170 ms to 340 ms */ -#define PULS_340MS 5 /* 340 ms to 670 ms */ -#define PULS_670MS 6 /* 670 ms to 1.3 s */ -#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ - -#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */ - -#define BLINK_42MS 0 /* 42 ms */ -#define BLINK_84MS 1 /* 84 ms */ -#define BLINK_170MS 2 /* 170 ms */ -#define BLINK_340MS 3 /* 340 ms */ -#define BLINK_670MS 4 /* 670 ms */ - /* values 5 - 7: reserved */ - -/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ -#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ -#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ -#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ -#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ -#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ -#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ - -#define MO_LED_NORM 0 -#define MO_LED_BLINK 1 -#define MO_LED_OFF 2 -#define MO_LED_ON 3 - -/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ - /* Bit 15.. 7: reserved */ -#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */ -#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */ -#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */ -#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */ -#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ - -/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ -#define PHY_M_FC_AUTO_SEL (1<<15) /* Bit 15: Fiber/Copper Auto Sel. dis. */ -#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14: Fiber/Copper Autoneg. reg acc */ -#define PHY_M_FC_RESULUTION (1<<13) /* Bit 13: Fiber/Copper Resulution */ -#define PHY_M_SER_IF_AN_BP (1<<12) /* Bit 12: Ser IF autoneg. bypass enable */ -#define PHY_M_SER_IF_BP_ST (1<<11) /* Bit 11: Ser IF autoneg. bypass status */ -#define PHY_M_IRQ_POLARITY (1<<10) /* Bit 10: IRQ polarity */ - /* Bit 9..4: reserved */ -#define PHY_M_UNDOC1 (1<< 7) /* undocumented bit !! */ -#define PHY_M_MODE_MASK (0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */ - - -/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ -#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */ -#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */ - /* Bit 12.. 8: reserved */ -#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */ - -/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ -#define CABD_STAT_NORMAL 0 -#define CABD_STAT_SHORT 1 -#define CABD_STAT_OPEN 2 -#define CABD_STAT_FAIL 3 - - -/* - * GMAC registers - * - * The GMAC registers are 16 or 32 bits wide. - * The GMACs host processor interface is 16 bits wide, - * therefore ALL registers will be addressed with 16 bit accesses. - * - * The following macros are provided to access the GMAC registers - * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(), - * GM_INHASH(), and GM_OUTHASH(). - * The macros are defined in SkGeHw.h. - * - * Note: NA reg = Network Address e.g DA, SA etc. - * - */ - -/* Port Registers */ -#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ -#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ -#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ -#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ -#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ -#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ -#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ - -/* Source Address Registers */ -#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ -#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ -#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ -#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ -#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ -#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ - -/* Multicast Address Hash Registers */ -#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ -#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ -#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ -#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ - -/* Interrupt Source Registers */ -#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ -#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ -#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ - -/* Interrupt Mask Registers */ -#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ -#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ -#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ - -/* Serial Management Interface (SMI) Registers */ -#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ -#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ -#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ - -/* MIB Counters */ -#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ -#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ - -/* - * MIB Counters base address definitions (low word) - - * use offset 4 for access to high word (32 bit r/o) - */ -#define GM_RXF_UC_OK \ - (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ -#define GM_RXF_BC_OK \ - (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ -#define GM_RXF_MPAUSE \ - (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ -#define GM_RXF_MC_OK \ - (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ -#define GM_RXF_FCS_ERR \ - (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ - /* GM_MIB_CNT_BASE + 40: reserved */ -#define GM_RXO_OK_LO \ - (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ -#define GM_RXO_OK_HI \ - (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ -#define GM_RXO_ERR_LO \ - (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ -#define GM_RXO_ERR_HI \ - (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ -#define GM_RXF_SHT \ - (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ -#define GM_RXE_FRAG \ - (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ -#define GM_RXF_64B \ - (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ -#define GM_RXF_127B \ - (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ -#define GM_RXF_255B \ - (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ -#define GM_RXF_511B \ - (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ -#define GM_RXF_1023B \ - (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ -#define GM_RXF_1518B \ - (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ -#define GM_RXF_MAX_SZ \ - (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ -#define GM_RXF_LNG_ERR \ - (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ -#define GM_RXF_JAB_PKT \ - (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ - /* GM_MIB_CNT_BASE + 168: reserved */ -#define GM_RXE_FIFO_OV \ - (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ - /* GM_MIB_CNT_BASE + 184: reserved */ -#define GM_TXF_UC_OK \ - (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ -#define GM_TXF_BC_OK \ - (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ -#define GM_TXF_MPAUSE \ - (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ -#define GM_TXF_MC_OK \ - (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ -#define GM_TXO_OK_LO \ - (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ -#define GM_TXO_OK_HI \ - (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ -#define GM_TXF_64B \ - (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ -#define GM_TXF_127B \ - (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ -#define GM_TXF_255B \ - (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ -#define GM_TXF_511B \ - (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ -#define GM_TXF_1023B \ - (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ -#define GM_TXF_1518B \ - (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ -#define GM_TXF_MAX_SZ \ - (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ - /* GM_MIB_CNT_BASE + 296: reserved */ -#define GM_TXF_COL \ - (GM_MIB_CNT_BASE + 304) /* Tx Collision */ -#define GM_TXF_LAT_COL \ - (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ -#define GM_TXF_ABO_COL \ - (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ -#define GM_TXF_MUL_COL \ - (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ -#define GM_TXF_SNG_COL \ - (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ -#define GM_TXE_FIFO_UR \ - (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ - -/*----------------------------------------------------------------------------*/ -/* - * GMAC Bit Definitions - * - * If the bit access behaviour differs from the register access behaviour - * (r/w, r/o) this is documented after the bit number. - * The following bit access behaviours are used: - * (sc) self clearing - * (r/o) read only - */ - -/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ -#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */ -#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */ -#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow-Control Mode Disabled */ -#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */ -#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */ -#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */ -#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */ -#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */ - /* Bit 7..6: reserved */ -#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */ -#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ -#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */ -#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow-Control Mode Disabled */ -#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */ - /* Bit 0: reserved */ - -/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ - /* Bit 15: reserved */ -#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */ -#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow-Control Mode */ -#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */ -#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */ -#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */ -#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */ -#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */ -#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */ -#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */ -#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */ -#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow-Control Mode */ -#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */ -#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update Duplex */ -#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update Flow-C. */ -#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update Speed */ - -#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) -#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ - GM_GPCR_AU_SPD_DIS) - -/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ -#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ -#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ -#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ -#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */ - -#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) - -#define TX_COL_DEF 0x04 - -/* GM_RX_CTRL 16 bit r/w Receive Control Register */ -#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */ -#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */ -#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */ -#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */ - -/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ -#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */ -#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */ -#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */ - /* Bit 3..0: reserved */ - -#define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK) -#define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK) -#define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK) - -#define TX_JAM_LEN_DEF 0x03 -#define TX_JAM_IPG_DEF 0x0b -#define TX_IPG_JAM_DEF 0x1c - -/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ -#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder (r/o) */ -#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive Tx trials */ -#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Len) */ -#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Len) */ - /* Bit 7..5: reserved */ -#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ - -#define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK) -#define DATA_BLIND_DEF 0x04 - -#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) -#define IPG_DATA_DEF 0x1e - -/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ -#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ -#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ -#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/ -#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */ -#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */ - /* Bit 2..0: reserved */ - -#define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK) -#define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK) - - /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ - /* Bit 15..6: reserved */ -#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */ -#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */ - /* Bit 3..0: reserved */ - -/* Receive Frame Status Encoding */ -#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */ - /* Bit 15..14: reserved */ -#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */ -#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */ -#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */ -#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */ -#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */ -#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */ -#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */ -#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */ -#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */ -#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */ -#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */ - /* Bit 2: reserved */ -#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */ -#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */ - -/* - * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) - */ -#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \ - GMR_FS_LONG_ERR | \ - GMR_FS_MII_ERR | \ - GMR_FS_BAD_FC | \ - GMR_FS_GOOD_FC | \ - GMR_FS_JABBER) - -/* Rx GMAC FIFO Flush Mask (default) */ -#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \ - GMR_FS_RX_FF_OV | \ - GMR_FS_MII_ERR | \ - GMR_FS_BAD_FC | \ - GMR_FS_GOOD_FC | \ - GMR_FS_UN_SIZE | \ - GMR_FS_JABBER) - -/* typedefs *******************************************************************/ - - -/* function prototypes ********************************************************/ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INC_XMAC_H */ diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c deleted file mode 100644 index 6e6c56a..0000000 --- a/drivers/net/sk98lin/skaddr.c +++ /dev/null @@ -1,1788 +0,0 @@ -/****************************************************************************** - * - * Name: skaddr.c - * Project: Gigabit Ethernet Adapters, ADDR-Module - * Version: $Revision: 1.52 $ - * Date: $Date: 2003/06/02 13:46:15 $ - * Purpose: Manage Addresses (Multicast and Unicast) and Promiscuous Mode. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This module is intended to manage multicast addresses, address override, - * and promiscuous mode on GEnesis and Yukon adapters. - * - * Address Layout: - * port address: physical MAC address - * 1st exact match: logical MAC address (GEnesis only) - * 2nd exact match: RLMT multicast (GEnesis only) - * exact match 3-13: OS-specific multicasts (GEnesis only) - * - * Include File Hierarchy: - * - * "skdrv1st.h" - * "skdrv2nd.h" - * - ******************************************************************************/ - -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell."; -#endif /* DEBUG ||!LINT || !SK_SLIM */ - -#define __SKADDR_C - -#ifdef __cplusplus -extern "C" { -#endif /* cplusplus */ - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" - -/* defines ********************************************************************/ - - -#define XMAC_POLY 0xEDB88320UL /* CRC32-Poly - XMAC: Little Endian */ -#define GMAC_POLY 0x04C11DB7L /* CRC16-Poly - GMAC: Little Endian */ -#define HASH_BITS 6 /* #bits in hash */ -#define SK_MC_BIT 0x01 - -/* Error numbers and messages. */ - -#define SKERR_ADDR_E001 (SK_ERRBASE_ADDR + 0) -#define SKERR_ADDR_E001MSG "Bad Flags." -#define SKERR_ADDR_E002 (SKERR_ADDR_E001 + 1) -#define SKERR_ADDR_E002MSG "New Error." - -/* typedefs *******************************************************************/ - -/* None. */ - -/* global variables ***********************************************************/ - -/* 64-bit hash values with all bits set. */ - -static const SK_U16 OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF}; - -/* local variables ************************************************************/ - -#ifdef DEBUG -static int Next0[SK_MAX_MACS] = {0}; -#endif /* DEBUG */ - -static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, - SK_MAC_ADDR *pMc, int Flags); -static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, - int Flags); -static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); -static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, - SK_U32 PortNumber, int NewPromMode); -static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, - SK_MAC_ADDR *pMc, int Flags); -static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, - int Flags); -static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); -static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, - SK_U32 PortNumber, int NewPromMode); - -/* functions ******************************************************************/ - -/****************************************************************************** - * - * SkAddrInit - initialize data, set state to init - * - * Description: - * - * SK_INIT_DATA - * ============ - * - * This routine clears the multicast tables and resets promiscuous mode. - * Some entries are reserved for the "logical MAC address", the - * SK-RLMT multicast address, and the BPDU multicast address. - * - * - * SK_INIT_IO - * ========== - * - * All permanent MAC addresses are read from EPROM. - * If the current MAC addresses are not already set in software, - * they are set to the values of the permanent addresses. - * The current addresses are written to the corresponding MAC. - * - * - * SK_INIT_RUN - * =========== - * - * Nothing. - * - * Context: - * init, pageable - * - * Returns: - * SK_ADDR_SUCCESS - */ -int SkAddrInit( -SK_AC *pAC, /* the adapter context */ -SK_IOC IoC, /* I/O context */ -int Level) /* initialization level */ -{ - int j; - SK_U32 i; - SK_U8 *InAddr; - SK_U16 *OutAddr; - SK_ADDR_PORT *pAPort; - - switch (Level) { - case SK_INIT_DATA: - SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0, - (SK_U16) sizeof(SK_ADDR)); - - for (i = 0; i < SK_MAX_MACS; i++) { - pAPort = &pAC->Addr.Port[i]; - pAPort->PromMode = SK_PROM_MODE_NONE; - - pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; - pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; - pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; - pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; - } -#ifdef xDEBUG - for (i = 0; i < SK_MAX_MACS; i++) { - if (pAC->Addr.Port[i].NextExactMatchRlmt < - SK_ADDR_FIRST_MATCH_RLMT) { - Next0[i] |= 4; - } - } -#endif /* DEBUG */ - /* pAC->Addr.InitDone = SK_INIT_DATA; */ - break; - - case SK_INIT_IO: -#ifndef SK_NO_RLMT - for (i = 0; i < SK_MAX_NETS; i++) { - pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort; - } -#endif /* !SK_NO_RLMT */ -#ifdef xDEBUG - for (i = 0; i < SK_MAX_MACS; i++) { - if (pAC->Addr.Port[i].NextExactMatchRlmt < - SK_ADDR_FIRST_MATCH_RLMT) { - Next0[i] |= 8; - } - } -#endif /* DEBUG */ - - /* Read permanent logical MAC address from Control Register File. */ - for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j]; - SK_IN8(IoC, B2_MAC_1 + j, InAddr); - } - - if (!pAC->Addr.Net[0].CurrentMacAddressSet) { - /* Set the current logical MAC address to the permanent one. */ - pAC->Addr.Net[0].CurrentMacAddress = - pAC->Addr.Net[0].PermanentMacAddress; - pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE; - } - - /* Set the current logical MAC address. */ - pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] = - pAC->Addr.Net[0].CurrentMacAddress; -#if SK_MAX_NETS > 1 - /* Set logical MAC address for net 2 to (log | 3). */ - if (!pAC->Addr.Net[1].CurrentMacAddressSet) { - pAC->Addr.Net[1].PermanentMacAddress = - pAC->Addr.Net[0].PermanentMacAddress; - pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3; - /* Set the current logical MAC address to the permanent one. */ - pAC->Addr.Net[1].CurrentMacAddress = - pAC->Addr.Net[1].PermanentMacAddress; - pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE; - } -#endif /* SK_MAX_NETS > 1 */ - -#ifdef DEBUG - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, - ("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", - i, - pAC->Addr.Net[i].PermanentMacAddress.a[0], - pAC->Addr.Net[i].PermanentMacAddress.a[1], - pAC->Addr.Net[i].PermanentMacAddress.a[2], - pAC->Addr.Net[i].PermanentMacAddress.a[3], - pAC->Addr.Net[i].PermanentMacAddress.a[4], - pAC->Addr.Net[i].PermanentMacAddress.a[5])) - - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, - ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", - i, - pAC->Addr.Net[i].CurrentMacAddress.a[0], - pAC->Addr.Net[i].CurrentMacAddress.a[1], - pAC->Addr.Net[i].CurrentMacAddress.a[2], - pAC->Addr.Net[i].CurrentMacAddress.a[3], - pAC->Addr.Net[i].CurrentMacAddress.a[4], - pAC->Addr.Net[i].CurrentMacAddress.a[5])) - } -#endif /* DEBUG */ - - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - pAPort = &pAC->Addr.Port[i]; - - /* Read permanent port addresses from Control Register File. */ - for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j]; - SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr); - } - - if (!pAPort->CurrentMacAddressSet) { - /* - * Set the current and previous physical MAC address - * of this port to its permanent MAC address. - */ - pAPort->CurrentMacAddress = pAPort->PermanentMacAddress; - pAPort->PreviousMacAddress = pAPort->PermanentMacAddress; - pAPort->CurrentMacAddressSet = SK_TRUE; - } - - /* Set port's current physical MAC address. */ - OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - XM_OUTADDR(IoC, i, XM_SA, OutAddr); - } -#endif /* GENESIS */ -#ifdef YUKON - if (!pAC->GIni.GIGenesis) { - GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr); - } -#endif /* YUKON */ -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, - ("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAPort->PermanentMacAddress.a[0], - pAPort->PermanentMacAddress.a[1], - pAPort->PermanentMacAddress.a[2], - pAPort->PermanentMacAddress.a[3], - pAPort->PermanentMacAddress.a[4], - pAPort->PermanentMacAddress.a[5])) - - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, - ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAPort->CurrentMacAddress.a[0], - pAPort->CurrentMacAddress.a[1], - pAPort->CurrentMacAddress.a[2], - pAPort->CurrentMacAddress.a[3], - pAPort->CurrentMacAddress.a[4], - pAPort->CurrentMacAddress.a[5])) -#endif /* DEBUG */ - } - /* pAC->Addr.InitDone = SK_INIT_IO; */ - break; - - case SK_INIT_RUN: -#ifdef xDEBUG - for (i = 0; i < SK_MAX_MACS; i++) { - if (pAC->Addr.Port[i].NextExactMatchRlmt < - SK_ADDR_FIRST_MATCH_RLMT) { - Next0[i] |= 16; - } - } -#endif /* DEBUG */ - - /* pAC->Addr.InitDone = SK_INIT_RUN; */ - break; - - default: /* error */ - break; - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrInit */ - -#ifndef SK_SLIM - -/****************************************************************************** - * - * SkAddrMcClear - clear the multicast table - * - * Description: - * This routine clears the multicast table. - * - * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated - * immediately. - * - * It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according - * to the adapter in use. The real work is done there. - * - * Context: - * runtime, pageable - * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY - * may be called after SK_INIT_IO without limitation - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -int SkAddrMcClear( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Index of affected port */ -int Flags) /* permanent/non-perm, sw-only */ -{ - int ReturnCode; - - if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } - - if (pAC->GIni.GIGenesis) { - ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags); - } - else { - ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags); - } - - return (ReturnCode); - -} /* SkAddrMcClear */ - -#endif /* !SK_SLIM */ - -#ifndef SK_SLIM - -/****************************************************************************** - * - * SkAddrXmacMcClear - clear the multicast table - * - * Description: - * This routine clears the multicast table - * (either entry 2 or entries 3-16 and InexactFilter) of the given port. - * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated - * immediately. - * - * Context: - * runtime, pageable - * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY - * may be called after SK_INIT_IO without limitation - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrXmacMcClear( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Index of affected port */ -int Flags) /* permanent/non-perm, sw-only */ -{ - int i; - - if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ - - /* Clear RLMT multicast addresses. */ - pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; - } - else { /* not permanent => DRV */ - - /* Clear InexactFilter */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; - } - - /* Clear DRV multicast addresses. */ - - pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; - } - - if (!(Flags & SK_MC_SW_ONLY)) { - (void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber); - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrXmacMcClear */ - -#endif /* !SK_SLIM */ - -#ifndef SK_SLIM - -/****************************************************************************** - * - * SkAddrGmacMcClear - clear the multicast table - * - * Description: - * This routine clears the multicast hashing table (InexactFilter) - * (either the RLMT or the driver bits) of the given port. - * - * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated - * immediately. - * - * Context: - * runtime, pageable - * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY - * may be called after SK_INIT_IO without limitation - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrGmacMcClear( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Index of affected port */ -int Flags) /* permanent/non-perm, sw-only */ -{ - int i; - -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) -#endif /* DEBUG */ - - /* Clear InexactFilter */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; - } - - if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ - - /* Copy DRV bits to InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; - - /* Clear InexactRlmtFilter. */ - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0; - - } - } - else { /* not permanent => DRV */ - - /* Copy RLMT bits to InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; - - /* Clear InexactDrvFilter. */ - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0; - } - } - -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) -#endif /* DEBUG */ - - if (!(Flags & SK_MC_SW_ONLY)) { - (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber); - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrGmacMcClear */ - -#ifndef SK_ADDR_CHEAT - -/****************************************************************************** - * - * SkXmacMcHash - hash multicast address - * - * Description: - * This routine computes the hash value for a multicast address. - * A CRC32 algorithm is used. - * - * Notes: - * The code was adapted from the XaQti data sheet. - * - * Context: - * runtime, pageable - * - * Returns: - * Hash value of multicast address. - */ -static SK_U32 SkXmacMcHash( -unsigned char *pMc) /* Multicast address */ -{ - SK_U32 Idx; - SK_U32 Bit; - SK_U32 Data; - SK_U32 Crc; - - Crc = 0xFFFFFFFFUL; - for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) { - Data = *pMc++; - for (Bit = 0; Bit < 8; Bit++, Data >>= 1) { - Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0); - } - } - - return (Crc & ((1 << HASH_BITS) - 1)); - -} /* SkXmacMcHash */ - - -/****************************************************************************** - * - * SkGmacMcHash - hash multicast address - * - * Description: - * This routine computes the hash value for a multicast address. - * A CRC16 algorithm is used. - * - * Notes: - * - * - * Context: - * runtime, pageable - * - * Returns: - * Hash value of multicast address. - */ -static SK_U32 SkGmacMcHash( -unsigned char *pMc) /* Multicast address */ -{ - SK_U32 Data; - SK_U32 TmpData; - SK_U32 Crc; - int Byte; - int Bit; - - Crc = 0xFFFFFFFFUL; - for (Byte = 0; Byte < 6; Byte++) { - /* Get next byte. */ - Data = (SK_U32) pMc[Byte]; - - /* Change bit order in byte. */ - TmpData = Data; - for (Bit = 0; Bit < 8; Bit++) { - if (TmpData & 1L) { - Data |= 1L << (7 - Bit); - } - else { - Data &= ~(1L << (7 - Bit)); - } - TmpData >>= 1; - } - - Crc ^= (Data << 24); - for (Bit = 0; Bit < 8; Bit++) { - if (Crc & 0x80000000) { - Crc = (Crc << 1) ^ GMAC_POLY; - } - else { - Crc <<= 1; - } - } - } - - return (Crc & ((1 << HASH_BITS) - 1)); - -} /* SkGmacMcHash */ - -#endif /* !SK_ADDR_CHEAT */ - -/****************************************************************************** - * - * SkAddrMcAdd - add a multicast address to a port - * - * Description: - * This routine enables reception for a given address on the given port. - * - * It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the - * adapter in use. The real work is done there. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_DATA - * - * Returns: - * SK_MC_FILTERING_EXACT - * SK_MC_FILTERING_INEXACT - * SK_MC_ILLEGAL_ADDRESS - * SK_MC_ILLEGAL_PORT - * SK_MC_RLMT_OVERFLOW - */ -int SkAddrMcAdd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Port Number */ -SK_MAC_ADDR *pMc, /* multicast address to be added */ -int Flags) /* permanent/non-permanent */ -{ - int ReturnCode; - - if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } - - if (pAC->GIni.GIGenesis) { - ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); - } - else { - ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); - } - - return (ReturnCode); - -} /* SkAddrMcAdd */ - - -/****************************************************************************** - * - * SkAddrXmacMcAdd - add a multicast address to a port - * - * Description: - * This routine enables reception for a given address on the given port. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * The multicast bit is only checked if there are no free exact match - * entries. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_DATA - * - * Returns: - * SK_MC_FILTERING_EXACT - * SK_MC_FILTERING_INEXACT - * SK_MC_ILLEGAL_ADDRESS - * SK_MC_RLMT_OVERFLOW - */ -static int SkAddrXmacMcAdd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Port Number */ -SK_MAC_ADDR *pMc, /* multicast address to be added */ -int Flags) /* permanent/non-permanent */ -{ - int i; - SK_U8 Inexact; -#ifndef SK_ADDR_CHEAT - SK_U32 HashBit; -#endif /* !defined(SK_ADDR_CHEAT) */ - - if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ -#ifdef xDEBUG - if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt < - SK_ADDR_FIRST_MATCH_RLMT) { - Next0[PortNumber] |= 1; - return (SK_MC_RLMT_OVERFLOW); - } -#endif /* DEBUG */ - - if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt > - SK_ADDR_LAST_MATCH_RLMT) { - return (SK_MC_RLMT_OVERFLOW); - } - - /* Set a RLMT multicast address. */ - - pAC->Addr.Port[PortNumber].Exact[ - pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc; - - return (SK_MC_FILTERING_EXACT); - } - -#ifdef xDEBUG - if (pAC->Addr.Port[PortNumber].NextExactMatchDrv < - SK_ADDR_FIRST_MATCH_DRV) { - Next0[PortNumber] |= 2; - return (SK_MC_RLMT_OVERFLOW); - } -#endif /* DEBUG */ - - if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { - - /* Set exact match entry. */ - pAC->Addr.Port[PortNumber].Exact[ - pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc; - - /* Clear InexactFilter */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; - } - } - else { - if (!(pMc->a[0] & SK_MC_BIT)) { - /* Hashing only possible with multicast addresses */ - return (SK_MC_ILLEGAL_ADDRESS); - } -#ifndef SK_ADDR_CHEAT - /* Compute hash value of address. */ - HashBit = 63 - SkXmacMcHash(&pMc->a[0]); - - /* Add bit to InexactFilter. */ - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |= - 1 << (HashBit % 8); -#else /* SK_ADDR_CHEAT */ - /* Set all bits in InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; - } -#endif /* SK_ADDR_CHEAT */ - } - - for (Inexact = 0, i = 0; i < 8; i++) { - Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; - } - - if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) { - return (SK_MC_FILTERING_EXACT); - } - else { - return (SK_MC_FILTERING_INEXACT); - } - -} /* SkAddrXmacMcAdd */ - - -/****************************************************************************** - * - * SkAddrGmacMcAdd - add a multicast address to a port - * - * Description: - * This routine enables reception for a given address on the given port. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_DATA - * - * Returns: - * SK_MC_FILTERING_INEXACT - * SK_MC_ILLEGAL_ADDRESS - */ -static int SkAddrGmacMcAdd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Port Number */ -SK_MAC_ADDR *pMc, /* multicast address to be added */ -int Flags) /* permanent/non-permanent */ -{ - int i; -#ifndef SK_ADDR_CHEAT - SK_U32 HashBit; -#endif /* !defined(SK_ADDR_CHEAT) */ - - if (!(pMc->a[0] & SK_MC_BIT)) { - /* Hashing only possible with multicast addresses */ - return (SK_MC_ILLEGAL_ADDRESS); - } - -#ifndef SK_ADDR_CHEAT - - /* Compute hash value of address. */ - HashBit = SkGmacMcHash(&pMc->a[0]); - - if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ - - /* Add bit to InexactRlmtFilter. */ - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |= - 1 << (HashBit % 8); - - /* Copy bit to InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; - } -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6], - pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7])) -#endif /* DEBUG */ - } - else { /* not permanent => DRV */ - - /* Add bit to InexactDrvFilter. */ - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |= - 1 << (HashBit % 8); - - /* Copy bit to InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; - } -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6], - pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7])) -#endif /* DEBUG */ - } - -#else /* SK_ADDR_CHEAT */ - - /* Set all bits in InexactFilter. */ - for (i = 0; i < 8; i++) { - pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; - } -#endif /* SK_ADDR_CHEAT */ - - return (SK_MC_FILTERING_INEXACT); - -} /* SkAddrGmacMcAdd */ - -#endif /* !SK_SLIM */ - -/****************************************************************************** - * - * SkAddrMcUpdate - update the HW MC address table and set the MAC address - * - * Description: - * This routine enables reception of the addresses contained in a local - * table for a given port. - * It also programs the port's current physical MAC address. - * - * It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according - * to the adapter in use. The real work is done there. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_MC_FILTERING_EXACT - * SK_MC_FILTERING_INEXACT - * SK_ADDR_ILLEGAL_PORT - */ -int SkAddrMcUpdate( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber) /* Port Number */ -{ - int ReturnCode = 0; -#if (!defined(SK_SLIM) || defined(DEBUG)) - if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } -#endif /* !SK_SLIM || DEBUG */ - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber); - } -#endif /* GENESIS */ -#ifdef YUKON - if (!pAC->GIni.GIGenesis) { - ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber); - } -#endif /* YUKON */ - return (ReturnCode); - -} /* SkAddrMcUpdate */ - - -#ifdef GENESIS - -/****************************************************************************** - * - * SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address - * - * Description: - * This routine enables reception of the addresses contained in a local - * table for a given port. - * It also programs the port's current physical MAC address. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_MC_FILTERING_EXACT - * SK_MC_FILTERING_INEXACT - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrXmacMcUpdate( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber) /* Port Number */ -{ - SK_U32 i; - SK_U8 Inexact; - SK_U16 *OutAddr; - SK_ADDR_PORT *pAPort; - - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber)) - - pAPort = &pAC->Addr.Port[PortNumber]; - -#ifdef DEBUG - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) -#endif /* DEBUG */ - - /* Start with 0 to also program the logical MAC address. */ - for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { - /* Set exact match address i on XMAC */ - OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; - XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); - } - - /* Clear other permanent exact match addresses on XMAC */ - if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) { - - SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt, - SK_ADDR_LAST_MATCH_RLMT); - } - - for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) { - OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; - XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); - } - - /* Clear other non-permanent exact match addresses on XMAC */ - if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { - - SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv, - SK_ADDR_LAST_MATCH_DRV); - } - - for (Inexact = 0, i = 0; i < 8; i++) { - Inexact |= pAPort->InexactFilter.Bytes[i]; - } - - if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { - - /* Set all bits in 64-bit hash register. */ - XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else if (Inexact != 0) { - - /* Set 64-bit hash register to InexactFilter. */ - XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else { - /* Disable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); - } - - if (pAPort->PromMode != SK_PROM_MODE_NONE) { - (void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); - } - - /* Set port's current physical MAC address. */ - OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; - - XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); - -#ifdef xDEBUG - for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { - SK_U8 InAddr8[6]; - SK_U16 *InAddr; - - /* Get exact match address i from port PortNumber. */ - InAddr = (SK_U16 *) &InAddr8[0]; - - XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr); - - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrXmacMcUpdate: MC address %d on Port %u: ", - "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n", - i, - PortNumber, - InAddr8[0], - InAddr8[1], - InAddr8[2], - InAddr8[3], - InAddr8[4], - InAddr8[5], - pAPort->Exact[i].a[0], - pAPort->Exact[i].a[1], - pAPort->Exact[i].a[2], - pAPort->Exact[i].a[3], - pAPort->Exact[i].a[4], - pAPort->Exact[i].a[5])) - } -#endif /* DEBUG */ - - /* Determine return value. */ - if (Inexact == 0 && pAPort->PromMode == 0) { - return (SK_MC_FILTERING_EXACT); - } - else { - return (SK_MC_FILTERING_INEXACT); - } - -} /* SkAddrXmacMcUpdate */ - -#endif /* GENESIS */ - -#ifdef YUKON - -/****************************************************************************** - * - * SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address - * - * Description: - * This routine enables reception of the addresses contained in a local - * table for a given port. - * It also programs the port's current physical MAC address. - * - * Notes: - * The return code is only valid for SK_PROM_MODE_NONE. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_MC_FILTERING_EXACT - * SK_MC_FILTERING_INEXACT - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrGmacMcUpdate( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber) /* Port Number */ -{ -#ifndef SK_SLIM - SK_U32 i; - SK_U8 Inexact; -#endif /* not SK_SLIM */ - SK_U16 *OutAddr; - SK_ADDR_PORT *pAPort; - - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber)) - - pAPort = &pAC->Addr.Port[PortNumber]; - -#ifdef DEBUG - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) -#endif /* DEBUG */ - -#ifndef SK_SLIM - for (Inexact = 0, i = 0; i < 8; i++) { - Inexact |= pAPort->InexactFilter.Bytes[i]; - } - - /* Set 64-bit hash register to InexactFilter. */ - GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, - &pAPort->InexactFilter.Bytes[0]); - - if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { - - /* Set all bits in 64-bit hash register. */ - GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else { - /* Enable Hashing. */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - - if (pAPort->PromMode != SK_PROM_MODE_NONE) { - (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); - } -#else /* SK_SLIM */ - - /* Set all bits in 64-bit hash register. */ - GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - - (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); - -#endif /* SK_SLIM */ - - /* Set port's current physical MAC address. */ - OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; - GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); - - /* Set port's current logical MAC address. */ - OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0]; - GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr); - -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAPort->Exact[0].a[0], - pAPort->Exact[0].a[1], - pAPort->Exact[0].a[2], - pAPort->Exact[0].a[3], - pAPort->Exact[0].a[4], - pAPort->Exact[0].a[5])) - - SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAPort->CurrentMacAddress.a[0], - pAPort->CurrentMacAddress.a[1], - pAPort->CurrentMacAddress.a[2], - pAPort->CurrentMacAddress.a[3], - pAPort->CurrentMacAddress.a[4], - pAPort->CurrentMacAddress.a[5])) -#endif /* DEBUG */ - -#ifndef SK_SLIM - /* Determine return value. */ - if (Inexact == 0 && pAPort->PromMode == 0) { - return (SK_MC_FILTERING_EXACT); - } - else { - return (SK_MC_FILTERING_INEXACT); - } -#else /* SK_SLIM */ - return (SK_MC_FILTERING_INEXACT); -#endif /* SK_SLIM */ - -} /* SkAddrGmacMcUpdate */ - -#endif /* YUKON */ - -#ifndef SK_NO_MAO - -/****************************************************************************** - * - * SkAddrOverride - override a port's MAC address - * - * Description: - * This routine overrides the MAC address of one port. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_ADDR_SUCCESS if successful. - * SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address. - * SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address. - * SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before. - */ -int SkAddrOverride( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* Port Number */ -SK_MAC_ADDR SK_FAR *pNewAddr, /* new MAC address */ -int Flags) /* logical/physical MAC address */ -{ -#ifndef SK_NO_RLMT - SK_EVPARA Para; -#endif /* !SK_NO_RLMT */ - SK_U32 NetNumber; - SK_U32 i; - SK_U16 SK_FAR *OutAddr; - -#ifndef SK_NO_RLMT - NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber; -#else - NetNumber = 0; -#endif /* SK_NO_RLMT */ -#if (!defined(SK_SLIM) || defined(DEBUG)) - if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } -#endif /* !SK_SLIM || DEBUG */ - if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) { - return (SK_ADDR_MULTICAST_ADDRESS); - } - - if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) { - return (SK_ADDR_TOO_EARLY); - } - - if (Flags & SK_ADDR_SET_LOGICAL) { /* Activate logical MAC address. */ - /* Parameter *pNewAddr is ignored. */ - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - if (!pAC->Addr.Port[i].CurrentMacAddressSet) { - return (SK_ADDR_TOO_EARLY); - } - } -#ifndef SK_NO_RLMT - /* Set PortNumber to number of net's active port. */ - PortNumber = pAC->Rlmt.Net[NetNumber]. - Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; -#endif /* !SK_NO_RLMT */ - pAC->Addr.Port[PortNumber].Exact[0] = - pAC->Addr.Net[NetNumber].CurrentMacAddress; - - /* Write address to first exact match entry of active port. */ - (void) SkAddrMcUpdate(pAC, IoC, PortNumber); - } - else if (Flags & SK_ADDR_CLEAR_LOGICAL) { - /* Deactivate logical MAC address. */ - /* Parameter *pNewAddr is ignored. */ - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - if (!pAC->Addr.Port[i].CurrentMacAddressSet) { - return (SK_ADDR_TOO_EARLY); - } - } -#ifndef SK_NO_RLMT - /* Set PortNumber to number of net's active port. */ - PortNumber = pAC->Rlmt.Net[NetNumber]. - Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; -#endif /* !SK_NO_RLMT */ - for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) { - pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0; - } - - /* Write address to first exact match entry of active port. */ - (void) SkAddrMcUpdate(pAC, IoC, PortNumber); - } - else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) { /* Physical MAC address. */ - if (SK_ADDR_EQUAL(pNewAddr->a, - pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { - return (SK_ADDR_DUPLICATE_ADDRESS); - } - - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - if (!pAC->Addr.Port[i].CurrentMacAddressSet) { - return (SK_ADDR_TOO_EARLY); - } - - if (SK_ADDR_EQUAL(pNewAddr->a, - pAC->Addr.Port[i].CurrentMacAddress.a)) { - if (i == PortNumber) { - return (SK_ADDR_SUCCESS); - } - else { - return (SK_ADDR_DUPLICATE_ADDRESS); - } - } - } - - pAC->Addr.Port[PortNumber].PreviousMacAddress = - pAC->Addr.Port[PortNumber].CurrentMacAddress; - pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; - - /* Change port's physical MAC address. */ - OutAddr = (SK_U16 SK_FAR *) pNewAddr; -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); - } -#endif /* GENESIS */ -#ifdef YUKON - if (!pAC->GIni.GIGenesis) { - GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); - } -#endif /* YUKON */ - -#ifndef SK_NO_RLMT - /* Report address change to RLMT. */ - Para.Para32[0] = PortNumber; - Para.Para32[0] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); -#endif /* !SK_NO_RLMT */ - } - else { /* Logical MAC address. */ - if (SK_ADDR_EQUAL(pNewAddr->a, - pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { - return (SK_ADDR_SUCCESS); - } - - for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { - if (!pAC->Addr.Port[i].CurrentMacAddressSet) { - return (SK_ADDR_TOO_EARLY); - } - - if (SK_ADDR_EQUAL(pNewAddr->a, - pAC->Addr.Port[i].CurrentMacAddress.a)) { - return (SK_ADDR_DUPLICATE_ADDRESS); - } - } - - /* - * In case that the physical and the logical MAC addresses are equal - * we must also change the physical MAC address here. - * In this case we have an adapter which initially was programmed with - * two identical MAC addresses. - */ - if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a, - pAC->Addr.Port[PortNumber].Exact[0].a)) { - - pAC->Addr.Port[PortNumber].PreviousMacAddress = - pAC->Addr.Port[PortNumber].CurrentMacAddress; - pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; - -#ifndef SK_NO_RLMT - /* Report address change to RLMT. */ - Para.Para32[0] = PortNumber; - Para.Para32[0] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); -#endif /* !SK_NO_RLMT */ - } - -#ifndef SK_NO_RLMT - /* Set PortNumber to number of net's active port. */ - PortNumber = pAC->Rlmt.Net[NetNumber]. - Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; -#endif /* !SK_NO_RLMT */ - pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr; - pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr; -#ifdef DEBUG - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0], - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1], - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2], - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3], - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4], - pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5])) - - SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, - ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n", - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0], - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1], - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2], - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3], - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4], - pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5])) -#endif /* DEBUG */ - - /* Write address to first exact match entry of active port. */ - (void) SkAddrMcUpdate(pAC, IoC, PortNumber); - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrOverride */ - - -#endif /* SK_NO_MAO */ - -/****************************************************************************** - * - * SkAddrPromiscuousChange - set promiscuous mode for given port - * - * Description: - * This routine manages promiscuous mode: - * - none - * - all LLC frames - * - all MC frames - * - * It calls either SkAddrXmacPromiscuousChange or - * SkAddrGmacPromiscuousChange, according to the adapter in use. - * The real work is done there. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -int SkAddrPromiscuousChange( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* port whose promiscuous mode changes */ -int NewPromMode) /* new promiscuous mode */ -{ - int ReturnCode = 0; -#if (!defined(SK_SLIM) || defined(DEBUG)) - if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } -#endif /* !SK_SLIM || DEBUG */ - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - ReturnCode = - SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); - } -#endif /* GENESIS */ -#ifdef YUKON - if (!pAC->GIni.GIGenesis) { - ReturnCode = - SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); - } -#endif /* YUKON */ - - return (ReturnCode); - -} /* SkAddrPromiscuousChange */ - -#ifdef GENESIS - -/****************************************************************************** - * - * SkAddrXmacPromiscuousChange - set promiscuous mode for given port - * - * Description: - * This routine manages promiscuous mode: - * - none - * - all LLC frames - * - all MC frames - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrXmacPromiscuousChange( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* port whose promiscuous mode changes */ -int NewPromMode) /* new promiscuous mode */ -{ - int i; - SK_BOOL InexactModeBit; - SK_U8 Inexact; - SK_U8 HwInexact; - SK_FILTER64 HwInexactFilter; - SK_U16 LoMode; /* Lower 16 bits of XMAC Mode Register. */ - int CurPromMode = SK_PROM_MODE_NONE; - - /* Read CurPromMode from Hardware. */ - XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); - - if ((LoMode & XM_MD_ENA_PROM) != 0) { - /* Promiscuous mode! */ - CurPromMode |= SK_PROM_MODE_LLC; - } - - for (Inexact = 0xFF, i = 0; i < 8; i++) { - Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; - } - if (Inexact == 0xFF) { - CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); - } - else { - /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */ - XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); - - InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0; - - /* Read 64-bit hash register from XMAC */ - XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]); - - for (HwInexact = 0xFF, i = 0; i < 8; i++) { - HwInexact &= HwInexactFilter.Bytes[i]; - } - - if (InexactModeBit && (HwInexact == 0xFF)) { - CurPromMode |= SK_PROM_MODE_ALL_MC; - } - } - - pAC->Addr.Port[PortNumber].PromMode = NewPromMode; - - if (NewPromMode == CurPromMode) { - return (SK_ADDR_SUCCESS); - } - - if ((NewPromMode & SK_PROM_MODE_ALL_MC) && - !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */ - - /* Set all bits in 64-bit hash register. */ - XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else if ((CurPromMode & SK_PROM_MODE_ALL_MC) && - !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm MC. */ - for (Inexact = 0, i = 0; i < 8; i++) { - Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; - } - if (Inexact == 0) { - /* Disable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); - } - else { - /* Set 64-bit hash register to InexactFilter. */ - XM_OUTHASH(IoC, PortNumber, XM_HSM, - &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - } - - if ((NewPromMode & SK_PROM_MODE_LLC) && - !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ - /* Set the MAC in Promiscuous Mode */ - SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else if ((CurPromMode & SK_PROM_MODE_LLC) && - !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC. */ - /* Clear Promiscuous Mode */ - SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrXmacPromiscuousChange */ - -#endif /* GENESIS */ - -#ifdef YUKON - -/****************************************************************************** - * - * SkAddrGmacPromiscuousChange - set promiscuous mode for given port - * - * Description: - * This routine manages promiscuous mode: - * - none - * - all LLC frames - * - all MC frames - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -static int SkAddrGmacPromiscuousChange( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 PortNumber, /* port whose promiscuous mode changes */ -int NewPromMode) /* new promiscuous mode */ -{ - SK_U16 ReceiveControl; /* GMAC Receive Control Register */ - int CurPromMode = SK_PROM_MODE_NONE; - - /* Read CurPromMode from Hardware. */ - GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl); - - if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) { - /* Promiscuous mode! */ - CurPromMode |= SK_PROM_MODE_LLC; - } - - if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) { - /* All Multicast mode! */ - CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); - } - - pAC->Addr.Port[PortNumber].PromMode = NewPromMode; - - if (NewPromMode == CurPromMode) { - return (SK_ADDR_SUCCESS); - } - - if ((NewPromMode & SK_PROM_MODE_ALL_MC) && - !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */ - - /* Set all bits in 64-bit hash register. */ - GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); - - /* Enable Hashing */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - - if ((CurPromMode & SK_PROM_MODE_ALL_MC) && - !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */ - - /* Set 64-bit hash register to InexactFilter. */ - GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, - &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); - - /* Enable Hashing. */ - SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); - } - - if ((NewPromMode & SK_PROM_MODE_LLC) && - !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ - - /* Set the MAC to Promiscuous Mode. */ - SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); - } - else if ((CurPromMode & SK_PROM_MODE_LLC) && - !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */ - - /* Clear Promiscuous Mode. */ - SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); - } - - return (SK_ADDR_SUCCESS); - -} /* SkAddrGmacPromiscuousChange */ - -#endif /* YUKON */ - -#ifndef SK_SLIM - -/****************************************************************************** - * - * SkAddrSwap - swap address info - * - * Description: - * This routine swaps address info of two ports. - * - * Context: - * runtime, pageable - * may be called after SK_INIT_IO - * - * Returns: - * SK_ADDR_SUCCESS - * SK_ADDR_ILLEGAL_PORT - */ -int SkAddrSwap( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -SK_U32 FromPortNumber, /* Port1 Index */ -SK_U32 ToPortNumber) /* Port2 Index */ -{ - int i; - SK_U8 Byte; - SK_MAC_ADDR MacAddr; - SK_U32 DWord; - - if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } - - if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { - return (SK_ADDR_ILLEGAL_PORT); - } - - if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) { - return (SK_ADDR_ILLEGAL_PORT); - } - - /* - * Swap: - * - Exact Match Entries (GEnesis and Yukon) - * Yukon uses first entry for the logical MAC - * address (stored in the second GMAC register). - * - FirstExactMatchRlmt (GEnesis only) - * - NextExactMatchRlmt (GEnesis only) - * - FirstExactMatchDrv (GEnesis only) - * - NextExactMatchDrv (GEnesis only) - * - 64-bit filter (InexactFilter) - * - Promiscuous Mode - * of ports. - */ - - for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) { - MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i]; - pAC->Addr.Port[FromPortNumber].Exact[i] = - pAC->Addr.Port[ToPortNumber].Exact[i]; - pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr; - } - - for (i = 0; i < 8; i++) { - Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i]; - pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] = - pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i]; - pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte; - } - - i = pAC->Addr.Port[FromPortNumber].PromMode; - pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode; - pAC->Addr.Port[ToPortNumber].PromMode = i; - - if (pAC->GIni.GIGenesis) { - DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt; - pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt = - pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt; - pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord; - - DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt; - pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt = - pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt; - pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord; - - DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv; - pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv = - pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv; - pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord; - - DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv; - pAC->Addr.Port[FromPortNumber].NextExactMatchDrv = - pAC->Addr.Port[ToPortNumber].NextExactMatchDrv; - pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord; - } - - /* CAUTION: Solution works if only ports of one adapter are in use. */ - for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber]. - Net->NetNumber].NumPorts; i++) { - if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. - Port[i]->PortNumber == ToPortNumber) { - pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. - ActivePort = i; - /* 20001207 RA: Was "ToPortNumber;". */ - } - } - - (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber); - (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber); - - return (SK_ADDR_SUCCESS); - -} /* SkAddrSwap */ - -#endif /* !SK_SLIM */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c deleted file mode 100644 index 37ce03f..0000000 --- a/drivers/net/sk98lin/skdim.c +++ /dev/null @@ -1,742 +0,0 @@ -/****************************************************************************** - * - * Name: skdim.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.5 $ - * Date: $Date: 2003/11/28 12:55:40 $ - * Purpose: All functions to maintain interrupt moderation - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This module is intended to manage the dynamic interrupt moderation on both - * GEnesis and Yukon adapters. - * - * Include File Hierarchy: - * - * "skdrv1st.h" - * "skdrv2nd.h" - * - ******************************************************************************/ - -#ifndef lint -static const char SysKonnectFileId[] = - "@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect."; -#endif - -#define __SKADDR_C - -#ifdef __cplusplus -#error C++ is not yet supported. -extern "C" { -#endif - -/******************************************************************************* -** -** Includes -** -*******************************************************************************/ - -#ifndef __INC_SKDRV1ST_H -#include "h/skdrv1st.h" -#endif - -#ifndef __INC_SKDRV2ND_H -#include "h/skdrv2nd.h" -#endif - -#include - -/******************************************************************************* -** -** Defines -** -*******************************************************************************/ - -/******************************************************************************* -** -** Typedefs -** -*******************************************************************************/ - -/******************************************************************************* -** -** Local function prototypes -** -*******************************************************************************/ - -static unsigned int GetCurrentSystemLoad(SK_AC *pAC); -static SK_U64 GetIsrCalls(SK_AC *pAC); -static SK_BOOL IsIntModEnabled(SK_AC *pAC); -static void SetCurrIntCtr(SK_AC *pAC); -static void EnableIntMod(SK_AC *pAC); -static void DisableIntMod(SK_AC *pAC); -static void ResizeDimTimerDuration(SK_AC *pAC); -static void DisplaySelectedModerationType(SK_AC *pAC); -static void DisplaySelectedModerationMask(SK_AC *pAC); -static void DisplayDescrRatio(SK_AC *pAC); - -/******************************************************************************* -** -** Global variables -** -*******************************************************************************/ - -/******************************************************************************* -** -** Local variables -** -*******************************************************************************/ - -/******************************************************************************* -** -** Global functions -** -*******************************************************************************/ - -/******************************************************************************* -** Function : SkDimModerate -** Description : Called in every ISR to check if moderation is to be applied -** or not for the current number of interrupts -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : void (!) -** Notes : - -*******************************************************************************/ - -void -SkDimModerate(SK_AC *pAC) { - unsigned int CurrSysLoad = 0; /* expressed in percent */ - unsigned int LoadIncrease = 0; /* expressed in percent */ - SK_U64 ThresholdInts = 0; - SK_U64 IsrCallsPerSec = 0; - -#define M_DIMINFO pAC->DynIrqModInfo - - if (!IsIntModEnabled(pAC)) { - if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { - CurrSysLoad = GetCurrentSystemLoad(pAC); - if (CurrSysLoad > 75) { - /* - ** More than 75% total system load! Enable the moderation - ** to shield the system against too many interrupts. - */ - EnableIntMod(pAC); - } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) { - LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad); - if (LoadIncrease > ((M_DIMINFO.PrevSysLoad * - C_INT_MOD_ENABLE_PERCENTAGE) / 100)) { - if (CurrSysLoad > 10) { - /* - ** More than 50% increase with respect to the - ** previous load of the system. Most likely this - ** is due to our ISR-proc... - */ - EnableIntMod(pAC); - } - } - } else { - /* - ** Neither too much system load at all nor too much increase - ** with respect to the previous system load. Hence, we can leave - ** the ISR-handling like it is without enabling moderation. - */ - } - M_DIMINFO.PrevSysLoad = CurrSysLoad; - } - } else { - if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { - ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * - C_INT_MOD_DISABLE_PERCENTAGE) / 100); - IsrCallsPerSec = GetIsrCalls(pAC); - if (IsrCallsPerSec <= ThresholdInts) { - /* - ** The number of interrupts within the last second is - ** lower than the disable_percentage of the desried - ** maxrate. Therefore we can disable the moderation. - */ - DisableIntMod(pAC); - M_DIMINFO.MaxModIntsPerSec = - (M_DIMINFO.MaxModIntsPerSecUpperLimit + - M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2; - } else { - /* - ** The number of interrupts per sec is the same as expected. - ** Evalulate the descriptor-ratio. If it has changed, a resize - ** in the moderation timer might be useful - */ - if (M_DIMINFO.AutoSizing) { - ResizeDimTimerDuration(pAC); - } - } - } - } - - /* - ** Some information to the log... - */ - if (M_DIMINFO.DisplayStats) { - DisplaySelectedModerationType(pAC); - DisplaySelectedModerationMask(pAC); - DisplayDescrRatio(pAC); - } - - M_DIMINFO.NbrProcessedDescr = 0; - SetCurrIntCtr(pAC); -} - -/******************************************************************************* -** Function : SkDimStartModerationTimer -** Description : Starts the audit-timer for the dynamic interrupt moderation -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : void (!) -** Notes : - -*******************************************************************************/ - -void -SkDimStartModerationTimer(SK_AC *pAC) { - SK_EVPARA EventParam; /* Event struct for timer event */ - - SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); - EventParam.Para32[0] = SK_DRV_MODERATION_TIMER; - SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer, - SK_DRV_MODERATION_TIMER_LENGTH, - SKGE_DRV, SK_DRV_TIMER, EventParam); -} - -/******************************************************************************* -** Function : SkDimEnableModerationIfNeeded -** Description : Either enables or disables moderation -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : void (!) -** Notes : This function is called when a particular adapter is opened -** There is no Disable function, because when all interrupts -** might be disable, the moderation timer has no meaning at all -******************************************************************************/ - -void -SkDimEnableModerationIfNeeded(SK_AC *pAC) { - - if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) { - EnableIntMod(pAC); /* notification print in this function */ - } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { - SkDimStartModerationTimer(pAC); - if (M_DIMINFO.DisplayStats) { - printk("Dynamic moderation has been enabled\n"); - } - } else { - if (M_DIMINFO.DisplayStats) { - printk("No moderation has been enabled\n"); - } - } -} - -/******************************************************************************* -** Function : SkDimDisplayModerationSettings -** Description : Displays the current settings regarding interrupt moderation -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : void (!) -** Notes : - -*******************************************************************************/ - -void -SkDimDisplayModerationSettings(SK_AC *pAC) { - DisplaySelectedModerationType(pAC); - DisplaySelectedModerationMask(pAC); -} - -/******************************************************************************* -** -** Local functions -** -*******************************************************************************/ - -/******************************************************************************* -** Function : GetCurrentSystemLoad -** Description : Retrieves the current system load of the system. This load -** is evaluated for all processors within the system. -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : unsigned int: load expressed in percentage -** Notes : The possible range being returned is from 0 up to 100. -** Whereas 0 means 'no load at all' and 100 'system fully loaded' -** It is impossible to determine what actually causes the system -** to be in 100%, but maybe that is due to too much interrupts. -*******************************************************************************/ - -static unsigned int -GetCurrentSystemLoad(SK_AC *pAC) { - unsigned long jif = jiffies; - unsigned int UserTime = 0; - unsigned int SystemTime = 0; - unsigned int NiceTime = 0; - unsigned int IdleTime = 0; - unsigned int TotalTime = 0; - unsigned int UsedTime = 0; - unsigned int SystemLoad = 0; - - /* unsigned int NbrCpu = 0; */ - - /* - ** The following lines have been commented out, because - ** from kernel 2.5.44 onwards, the kernel-owned structure - ** - ** struct kernel_stat kstat - ** - ** is not marked as an exported symbol in the file - ** - ** kernel/ksyms.c - ** - ** As a consequence, using this driver as KLM is not possible - ** and any access of the structure kernel_stat via the - ** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided. - ** - ** The kstat-information might be added again in future - ** versions of the 2.5.xx kernel, but for the time being, - ** number of interrupts will serve as indication how much - ** load we currently have... - ** - ** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) { - ** UserTime = UserTime + kstat_cpu(NbrCpu).cpustat.user; - ** NiceTime = NiceTime + kstat_cpu(NbrCpu).cpustat.nice; - ** SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system; - ** } - */ - SK_U64 ThresholdInts = 0; - SK_U64 IsrCallsPerSec = 0; - - ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * - C_INT_MOD_ENABLE_PERCENTAGE) + 100); - IsrCallsPerSec = GetIsrCalls(pAC); - if (IsrCallsPerSec >= ThresholdInts) { - /* - ** We do not know how much the real CPU-load is! - ** Return 80% as a default in order to activate DIM - */ - SystemLoad = 80; - return (SystemLoad); - } - - UsedTime = UserTime + NiceTime + SystemTime; - - IdleTime = jif * num_online_cpus() - UsedTime; - TotalTime = UsedTime + IdleTime; - - SystemLoad = ( 100 * (UsedTime - M_DIMINFO.PrevUsedTime) ) / - (TotalTime - M_DIMINFO.PrevTotalTime); - - if (M_DIMINFO.DisplayStats) { - printk("Current system load is: %u\n", SystemLoad); - } - - M_DIMINFO.PrevTotalTime = TotalTime; - M_DIMINFO.PrevUsedTime = UsedTime; - - return (SystemLoad); -} - -/******************************************************************************* -** Function : GetIsrCalls -** Description : Depending on the selected moderation mask, this function will -** return the number of interrupts handled in the previous time- -** frame. This evaluated number is based on the current number -** of interrupts stored in PNMI-context and the previous stored -** interrupts. -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : int: the number of interrupts being executed in the last -** timeframe -** Notes : It makes only sense to call this function, when dynamic -** interrupt moderation is applied -*******************************************************************************/ - -static SK_U64 -GetIsrCalls(SK_AC *pAC) { - SK_U64 RxPort0IntDiff = 0; - SK_U64 RxPort1IntDiff = 0; - SK_U64 TxPort0IntDiff = 0; - SK_U64 TxPort1IntDiff = 0; - - if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) { - if (pAC->GIni.GIMacsFound == 2) { - TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - - pAC->DynIrqModInfo.PrevPort1TxIntrCts; - } - TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - - pAC->DynIrqModInfo.PrevPort0TxIntrCts; - } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) { - if (pAC->GIni.GIMacsFound == 2) { - RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - - pAC->DynIrqModInfo.PrevPort1RxIntrCts; - } - RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - - pAC->DynIrqModInfo.PrevPort0RxIntrCts; - } else { - if (pAC->GIni.GIMacsFound == 2) { - RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - - pAC->DynIrqModInfo.PrevPort1RxIntrCts; - TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - - pAC->DynIrqModInfo.PrevPort1TxIntrCts; - } - RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - - pAC->DynIrqModInfo.PrevPort0RxIntrCts; - TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - - pAC->DynIrqModInfo.PrevPort0TxIntrCts; - } - - return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff); -} - -/******************************************************************************* -** Function : GetRxCalls -** Description : This function will return the number of times a receive inter- -** rupt was processed. This is needed to evaluate any resizing -** factor. -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : SK_U64: the number of RX-ints being processed -** Notes : It makes only sense to call this function, when dynamic -** interrupt moderation is applied -*******************************************************************************/ - -static SK_U64 -GetRxCalls(SK_AC *pAC) { - SK_U64 RxPort0IntDiff = 0; - SK_U64 RxPort1IntDiff = 0; - - if (pAC->GIni.GIMacsFound == 2) { - RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - - pAC->DynIrqModInfo.PrevPort1RxIntrCts; - } - RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - - pAC->DynIrqModInfo.PrevPort0RxIntrCts; - - return (RxPort0IntDiff + RxPort1IntDiff); -} - -/******************************************************************************* -** Function : SetCurrIntCtr -** Description : Will store the current number orf occured interrupts in the -** adapter context. This is needed to evaluated the number of -** interrupts within a current timeframe. -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : void (!) -** Notes : - -*******************************************************************************/ - -static void -SetCurrIntCtr(SK_AC *pAC) { - if (pAC->GIni.GIMacsFound == 2) { - pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts; - pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts; - } - pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts; - pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts; -} - -/******************************************************************************* -** Function : IsIntModEnabled() -** Description : Retrieves the current value of the interrupts moderation -** command register. Its content determines whether any -** moderation is running or not. -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : SK_TRUE : if mod timer running -** SK_FALSE : if no moderation is being performed -** Notes : - -*******************************************************************************/ - -static SK_BOOL -IsIntModEnabled(SK_AC *pAC) { - unsigned long CtrCmd; - - SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd); - if ((CtrCmd & TIM_START) == TIM_START) { - return SK_TRUE; - } else { - return SK_FALSE; - } -} - -/******************************************************************************* -** Function : EnableIntMod() -** Description : Enables the interrupt moderation using the values stored in -** in the pAC->DynIntMod data structure -** Programmer : Ralph Roesler -** Last Modified: 22-mar-03 -** Returns : - -** Notes : - -*******************************************************************************/ - -static void -EnableIntMod(SK_AC *pAC) { - unsigned long ModBase; - - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { - ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; - } else { - ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; - } - - SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); - SK_OUT32(pAC->IoBase, B2_IRQM_MSK, pAC->DynIrqModInfo.MaskIrqModeration); - SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START); - if (M_DIMINFO.DisplayStats) { - printk("Enabled interrupt moderation (%i ints/sec)\n", - M_DIMINFO.MaxModIntsPerSec); - } -} - -/******************************************************************************* -** Function : DisableIntMod() -** Description : Disables the interrupt moderation independent of what inter- -** rupts are running or not -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : - -** Notes : - -*******************************************************************************/ - -static void -DisableIntMod(SK_AC *pAC) { - - SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP); - if (M_DIMINFO.DisplayStats) { - printk("Disabled interrupt moderation\n"); - } -} - -/******************************************************************************* -** Function : ResizeDimTimerDuration(); -** Description : Checks the current used descriptor ratio and resizes the -** duration timer (longer/smaller) if possible. -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : - -** Notes : There are both maximum and minimum timer duration value. -** This function assumes that interrupt moderation is already -** enabled! -*******************************************************************************/ - -static void -ResizeDimTimerDuration(SK_AC *pAC) { - SK_BOOL IncreaseTimerDuration; - int TotalMaxNbrDescr; - int UsedDescrRatio; - int RatioDiffAbs; - int RatioDiffRel; - int NewMaxModIntsPerSec; - int ModAdjValue; - long ModBase; - - /* - ** Check first if we are allowed to perform any modification - */ - if (IsIntModEnabled(pAC)) { - if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) { - return; - } else { - if (M_DIMINFO.ModJustEnabled) { - M_DIMINFO.ModJustEnabled = SK_FALSE; - return; - } - } - } - - /* - ** If we got until here, we have to evaluate the amount of the - ** descriptor ratio change... - */ - TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); - UsedDescrRatio = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr; - - if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) { - RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio); - RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio; - M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; - IncreaseTimerDuration = SK_FALSE; /* in other words: DECREASE */ - } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) { - RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); - RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; - M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; - IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ - } else { - RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); - RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; - M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; - IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ - } - - /* - ** Now we can determine the change in percent - */ - if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) { - ModAdjValue = 1; /* 1% change - maybe some other value in future */ - } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) { - ModAdjValue = 1; /* 1% change - maybe some other value in future */ - } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) { - ModAdjValue = 1; /* 1% change - maybe some other value in future */ - } else { - ModAdjValue = 1; /* 1% change - maybe some other value in future */ - } - - if (IncreaseTimerDuration) { - NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec + - (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; - } else { - NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec - - (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; - } - - /* - ** Check if we exceed boundaries... - */ - if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) || - (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) { - if (M_DIMINFO.DisplayStats) { - printk("Cannot change ModTim from %i to %i ints/sec\n", - M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); - } - return; - } else { - if (M_DIMINFO.DisplayStats) { - printk("Resized ModTim from %i to %i ints/sec\n", - M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); - } - } - - M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec; - - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { - ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; - } else { - ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; - } - - /* - ** We do not need to touch any other registers - */ - SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); -} - -/******************************************************************************* -** Function : DisplaySelectedModerationType() -** Description : Displays what type of moderation we have -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : void! -** Notes : - -*******************************************************************************/ - -static void -DisplaySelectedModerationType(SK_AC *pAC) { - - if (pAC->DynIrqModInfo.DisplayStats) { - if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) { - printk("Static int moderation runs with %i INTS/sec\n", - pAC->DynIrqModInfo.MaxModIntsPerSec); - } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) { - if (IsIntModEnabled(pAC)) { - printk("Dynamic int moderation runs with %i INTS/sec\n", - pAC->DynIrqModInfo.MaxModIntsPerSec); - } else { - printk("Dynamic int moderation currently not applied\n"); - } - } else { - printk("No interrupt moderation selected!\n"); - } - } -} - -/******************************************************************************* -** Function : DisplaySelectedModerationMask() -** Description : Displays what interrupts are moderated -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : void! -** Notes : - -*******************************************************************************/ - -static void -DisplaySelectedModerationMask(SK_AC *pAC) { - - if (pAC->DynIrqModInfo.DisplayStats) { - if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) { - switch (pAC->DynIrqModInfo.MaskIrqModeration) { - case IRQ_MASK_TX_ONLY: - printk("Only Tx-interrupts are moderated\n"); - break; - case IRQ_MASK_RX_ONLY: - printk("Only Rx-interrupts are moderated\n"); - break; - case IRQ_MASK_SP_ONLY: - printk("Only special-interrupts are moderated\n"); - break; - case IRQ_MASK_TX_RX: - printk("Tx- and Rx-interrupts are moderated\n"); - break; - case IRQ_MASK_SP_RX: - printk("Special- and Rx-interrupts are moderated\n"); - break; - case IRQ_MASK_SP_TX: - printk("Special- and Tx-interrupts are moderated\n"); - break; - case IRQ_MASK_RX_TX_SP: - printk("All Rx-, Tx and special-interrupts are moderated\n"); - break; - default: - printk("Don't know what is moderated\n"); - break; - } - } else { - printk("No specific interrupts masked for moderation\n"); - } - } -} - -/******************************************************************************* -** Function : DisplayDescrRatio -** Description : Like the name states... -** Programmer : Ralph Roesler -** Last Modified: 23-mar-03 -** Returns : void! -** Notes : - -*******************************************************************************/ - -static void -DisplayDescrRatio(SK_AC *pAC) { - int TotalMaxNbrDescr = 0; - - if (pAC->DynIrqModInfo.DisplayStats) { - TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); - printk("Ratio descriptors: %i/%i\n", - M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr); - } -} - -/******************************************************************************* -** -** End of file -** -*******************************************************************************/ diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c deleted file mode 100644 index 5a6da89..0000000 --- a/drivers/net/sk98lin/skethtool.c +++ /dev/null @@ -1,627 +0,0 @@ -/****************************************************************************** - * - * Name: skethtool.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.7 $ - * Date: $Date: 2004/09/29 13:32:07 $ - * Purpose: All functions regarding ethtool handling - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2004 Marvell. - * - * Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet - * Server Adapters. - * - * Author: Ralph Roesler (rroesler@syskonnect.de) - * Mirko Lindner (mlindner@syskonnect.de) - * - * Address all question to: linux@syskonnect.de - * - * The technical manual for the adapters is available from SysKonnect's - * web pages: www.syskonnect.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - *****************************************************************************/ - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" -#include "h/skversion.h" - -#include -#include -#include - -/****************************************************************************** - * - * Defines - * - *****************************************************************************/ - -#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ - SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \ - SUPPORTED_TP) - -#define ADV_COPPER_ALL (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ - ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \ - ADVERTISED_TP) - -#define SUPP_FIBRE_ALL (SUPPORTED_1000baseT_Full | \ - SUPPORTED_FIBRE | \ - SUPPORTED_Autoneg) - -#define ADV_FIBRE_ALL (ADVERTISED_1000baseT_Full | \ - ADVERTISED_FIBRE | \ - ADVERTISED_Autoneg) - - -/****************************************************************************** - * - * Local Functions - * - *****************************************************************************/ - -/***************************************************************************** - * - * getSettings - retrieves the current settings of the selected adapter - * - * Description: - * The current configuration of the selected adapter is returned. - * This configuration involves a)speed, b)duplex and c)autoneg plus - * a number of other variables. - * - * Returns: always 0 - * - */ -static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - const DEV_NET *pNet = netdev_priv(dev); - int port = pNet->PortNr; - const SK_AC *pAC = pNet->pAC; - const SK_GEPORT *pPort = &pAC->GIni.GP[port]; - - static int DuplexAutoNegConfMap[9][3]= { - { -1 , -1 , -1 }, - { 0 , -1 , -1 }, - { SK_LMODE_HALF , DUPLEX_HALF, AUTONEG_DISABLE }, - { SK_LMODE_FULL , DUPLEX_FULL, AUTONEG_DISABLE }, - { SK_LMODE_AUTOHALF , DUPLEX_HALF, AUTONEG_ENABLE }, - { SK_LMODE_AUTOFULL , DUPLEX_FULL, AUTONEG_ENABLE }, - { SK_LMODE_AUTOBOTH , DUPLEX_FULL, AUTONEG_ENABLE }, - { SK_LMODE_AUTOSENSE , -1 , -1 }, - { SK_LMODE_INDETERMINATED, -1 , -1 } - }; - static int SpeedConfMap[6][2] = { - { 0 , -1 }, - { SK_LSPEED_AUTO , -1 }, - { SK_LSPEED_10MBPS , SPEED_10 }, - { SK_LSPEED_100MBPS , SPEED_100 }, - { SK_LSPEED_1000MBPS , SPEED_1000 }, - { SK_LSPEED_INDETERMINATED, -1 } - }; - static int AdvSpeedMap[6][2] = { - { 0 , -1 }, - { SK_LSPEED_AUTO , -1 }, - { SK_LSPEED_10MBPS , ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full }, - { SK_LSPEED_100MBPS , ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full }, - { SK_LSPEED_1000MBPS , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full}, - { SK_LSPEED_INDETERMINATED, -1 } - }; - - ecmd->phy_address = port; - ecmd->speed = SpeedConfMap[pPort->PLinkSpeedUsed][1]; - ecmd->duplex = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1]; - ecmd->autoneg = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2]; - ecmd->transceiver = XCVR_INTERNAL; - - if (pAC->GIni.GICopperType) { - ecmd->port = PORT_TP; - ecmd->supported = (SUPP_COPPER_ALL|SUPPORTED_Autoneg); - if (pAC->GIni.GIGenesis) { - ecmd->supported &= ~(SUPPORTED_10baseT_Half); - ecmd->supported &= ~(SUPPORTED_10baseT_Full); - ecmd->supported &= ~(SUPPORTED_100baseT_Half); - ecmd->supported &= ~(SUPPORTED_100baseT_Full); - } else { - if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { - ecmd->supported &= ~(SUPPORTED_1000baseT_Half); - } -#ifdef CHIP_ID_YUKON_FE - if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) { - ecmd->supported &= ~(SUPPORTED_1000baseT_Half); - ecmd->supported &= ~(SUPPORTED_1000baseT_Full); - } -#endif - } - if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) { - ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1]; - if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { - ecmd->advertising &= ~(SUPPORTED_1000baseT_Half); - } - } else { - ecmd->advertising = ecmd->supported; - } - - if (ecmd->autoneg == AUTONEG_ENABLE) - ecmd->advertising |= ADVERTISED_Autoneg; - } else { - ecmd->port = PORT_FIBRE; - ecmd->supported = SUPP_FIBRE_ALL; - ecmd->advertising = ADV_FIBRE_ALL; - } - return 0; -} - -/* - * MIB infrastructure uses instance value starting at 1 - * based on board and port. - */ -static inline u32 pnmiInstance(const DEV_NET *pNet) -{ - return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr; -} - -/***************************************************************************** - * - * setSettings - configures the settings of a selected adapter - * - * Description: - * Possible settings that may be altered are a)speed, b)duplex or - * c)autonegotiation. - * - * Returns: - * 0: everything fine, no error - * <0: the return value is the error code of the failure - */ -static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - u32 instance; - char buf[4]; - int len = 1; - - if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100 - && ecmd->speed != SPEED_1000) - return -EINVAL; - - if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) - return -EINVAL; - - if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) - return -EINVAL; - - if (ecmd->autoneg == AUTONEG_DISABLE) - *buf = (ecmd->duplex == DUPLEX_FULL) - ? SK_LMODE_FULL : SK_LMODE_HALF; - else - *buf = (ecmd->duplex == DUPLEX_FULL) - ? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF; - - instance = pnmiInstance(pNet); - if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE, - &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) - return -EINVAL; - - switch(ecmd->speed) { - case SPEED_1000: - *buf = SK_LSPEED_1000MBPS; - break; - case SPEED_100: - *buf = SK_LSPEED_100MBPS; - break; - case SPEED_10: - *buf = SK_LSPEED_10MBPS; - } - - if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, - &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) - return -EINVAL; - - return 0; -} - -/***************************************************************************** - * - * getDriverInfo - returns generic driver and adapter information - * - * Description: - * Generic driver information is returned via this function, such as - * the name of the driver, its version and and firmware version. - * In addition to this, the location of the selected adapter is - * returned as a bus info string (e.g. '01:05.0'). - * - * Returns: N/A - * - */ -static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - const DEV_NET *pNet = netdev_priv(dev); - const SK_AC *pAC = pNet->pAC; - char vers[32]; - - snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)", - (pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf); - - strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver)); - strcpy(info->version, vers); - strcpy(info->fw_version, "N/A"); - strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN); -} - -/* - * Ethtool statistics support. - */ -static const char StringsStats[][ETH_GSTRING_LEN] = { - "rx_packets", "tx_packets", - "rx_bytes", "tx_bytes", - "rx_errors", "tx_errors", - "rx_dropped", "tx_dropped", - "multicasts", "collisions", - "rx_length_errors", "rx_buffer_overflow_errors", - "rx_crc_errors", "rx_frame_errors", - "rx_too_short_errors", "rx_too_long_errors", - "rx_carrier_extension_errors", "rx_symbol_errors", - "rx_llc_mac_size_errors", "rx_carrier_errors", - "rx_jabber_errors", "rx_missed_errors", - "tx_abort_collision_errors", "tx_carrier_errors", - "tx_buffer_underrun_errors", "tx_heartbeat_errors", - "tx_window_errors", -}; - -static int getStatsCount(struct net_device *dev) -{ - return ARRAY_SIZE(StringsStats); -} - -static void getStrings(struct net_device *dev, u32 stringset, u8 *data) -{ - switch(stringset) { - case ETH_SS_STATS: - memcpy(data, *StringsStats, sizeof(StringsStats)); - break; - } -} - -static void getEthtoolStats(struct net_device *dev, - struct ethtool_stats *stats, u64 *data) -{ - const DEV_NET *pNet = netdev_priv(dev); - const SK_AC *pAC = pNet->pAC; - const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct; - - *data++ = pPnmiStruct->Stat[0].StatRxOkCts; - *data++ = pPnmiStruct->Stat[0].StatTxOkCts; - *data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts; - *data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts; - *data++ = pPnmiStruct->InErrorsCts; - *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; - *data++ = pPnmiStruct->RxNoBufCts; - *data++ = pPnmiStruct->TxNoBufCts; - *data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts; - *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; - *data++ = pPnmiStruct->Stat[0].StatRxRuntCts; - *data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts; - *data++ = pPnmiStruct->Stat[0].StatRxFcsCts; - *data++ = pPnmiStruct->Stat[0].StatRxFramingCts; - *data++ = pPnmiStruct->Stat[0].StatRxShortsCts; - *data++ = pPnmiStruct->Stat[0].StatRxTooLongCts; - *data++ = pPnmiStruct->Stat[0].StatRxCextCts; - *data++ = pPnmiStruct->Stat[0].StatRxSymbolCts; - *data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts; - *data++ = pPnmiStruct->Stat[0].StatRxCarrierCts; - *data++ = pPnmiStruct->Stat[0].StatRxJabberCts; - *data++ = pPnmiStruct->Stat[0].StatRxMissedCts; - *data++ = pAC->stats.tx_aborted_errors; - *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; - *data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts; - *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; - *data++ = pAC->stats.tx_window_errors; -} - - -/***************************************************************************** - * - * toggleLeds - Changes the LED state of an adapter - * - * Description: - * This function changes the current state of all LEDs of an adapter so - * that it can be located by a user. - * - * Returns: N/A - * - */ -static void toggleLeds(DEV_NET *pNet, int on) -{ - SK_AC *pAC = pNet->pAC; - int port = pNet->PortNr; - void __iomem *io = pAC->IoBase; - - if (pAC->GIni.GIGenesis) { - SK_OUT8(io, MR_ADDR(port,LNK_LED_REG), - on ? SK_LNK_ON : SK_LNK_OFF); - SkGeYellowLED(pAC, io, - on ? (LED_ON >> 1) : (LED_OFF >> 1)); - SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI), - on ? SK_LED_TST : SK_LED_DIS); - - if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM) - SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL, - on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF); - else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE) - SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG, - on ? 0x0800 : PHY_L_LC_LEDT); - else - SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI), - on ? SK_LED_TST : SK_LED_DIS); - } else { - const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) | - PHY_M_LED_MO_10(MO_LED_ON) | - PHY_M_LED_MO_100(MO_LED_ON) | - PHY_M_LED_MO_1000(MO_LED_ON) | - PHY_M_LED_MO_RX(MO_LED_ON)); - const u16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) | - PHY_M_LED_MO_10(MO_LED_OFF) | - PHY_M_LED_MO_100(MO_LED_OFF) | - PHY_M_LED_MO_1000(MO_LED_OFF) | - PHY_M_LED_MO_RX(MO_LED_OFF)); - - - SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0); - SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER, - on ? YukLedOn : YukLedOff); - } -} - -/***************************************************************************** - * - * skGeBlinkTimer - Changes the LED state of an adapter - * - * Description: - * This function changes the current state of all LEDs of an adapter so - * that it can be located by a user. If the requested time interval for - * this test has elapsed, this function cleans up everything that was - * temporarily setup during the locate NIC test. This involves of course - * also closing or opening any adapter so that the initial board state - * is recovered. - * - * Returns: N/A - * - */ -void SkGeBlinkTimer(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - toggleLeds(pNet, pAC->LedsOn); - - pAC->LedsOn = !pAC->LedsOn; - mod_timer(&pAC->BlinkTimer, jiffies + HZ/4); -} - -/***************************************************************************** - * - * locateDevice - start the locate NIC feature of the elected adapter - * - * Description: - * This function is used if the user want to locate a particular NIC. - * All LEDs are regularly switched on and off, so the NIC can easily - * be identified. - * - * Returns: - * ==0: everything fine, no error, locateNIC test was started - * !=0: one locateNIC test runs already - * - */ -static int locateDevice(struct net_device *dev, u32 data) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) - data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); - - /* start blinking */ - pAC->LedsOn = 0; - mod_timer(&pAC->BlinkTimer, jiffies); - msleep_interruptible(data * 1000); - del_timer_sync(&pAC->BlinkTimer); - toggleLeds(pNet, 0); - - return 0; -} - -/***************************************************************************** - * - * getPauseParams - retrieves the pause parameters - * - * Description: - * All current pause parameters of a selected adapter are placed - * in the passed ethtool_pauseparam structure and are returned. - * - * Returns: N/A - * - */ -static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; - - epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) || - (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM); - - epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND); - epause->autoneg = epause->rx_pause || epause->tx_pause; -} - -/***************************************************************************** - * - * setPauseParams - configures the pause parameters of an adapter - * - * Description: - * This function sets the Rx or Tx pause parameters - * - * Returns: - * ==0: everything fine, no error - * !=0: the return value is the error code of the failure - */ -static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; - u32 instance = pnmiInstance(pNet); - struct ethtool_pauseparam old; - u8 oldspeed = pPort->PLinkSpeedUsed; - char buf[4]; - int len = 1; - int ret; - - /* - ** we have to determine the current settings to see if - ** the operator requested any modification of the flow - ** control parameters... - */ - getPauseParams(dev, &old); - - /* - ** perform modifications regarding the changes - ** requested by the operator - */ - if (epause->autoneg != old.autoneg) - *buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC; - else { - if (epause->rx_pause && epause->tx_pause) - *buf = SK_FLOW_MODE_SYMMETRIC; - else if (epause->rx_pause && !epause->tx_pause) - *buf = SK_FLOW_MODE_SYM_OR_REM; - else if (!epause->rx_pause && epause->tx_pause) - *buf = SK_FLOW_MODE_LOC_SEND; - else - *buf = SK_FLOW_MODE_NONE; - } - - ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE, - &buf, &len, instance, pNet->NetNr); - - if (ret != SK_PNMI_ERR_OK) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, - ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret)); - goto err; - } - - /* - ** It may be that autoneg has been disabled! Therefore - ** set the speed to the previously used value... - */ - if (!epause->autoneg) { - len = 1; - ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, - &oldspeed, &len, instance, pNet->NetNr); - if (ret != SK_PNMI_ERR_OK) - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, - ("ethtool (sk98lin): error setting speed (%i)\n", ret)); - } - err: - return ret ? -EIO : 0; -} - -/* Only Yukon supports checksum offload. */ -static int setScatterGather(struct net_device *dev, u32 data) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) - return -EOPNOTSUPP; - return ethtool_op_set_sg(dev, data); -} - -static int setTxCsum(struct net_device *dev, u32 data) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) - return -EOPNOTSUPP; - - return ethtool_op_set_tx_csum(dev, data); -} - -static u32 getRxCsum(struct net_device *dev) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - return pAC->RxPort[pNet->PortNr].RxCsum; -} - -static int setRxCsum(struct net_device *dev, u32 data) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) - return -EOPNOTSUPP; - - pAC->RxPort[pNet->PortNr].RxCsum = data != 0; - return 0; -} - -static int getRegsLen(struct net_device *dev) -{ - return 0x4000; -} - -/* - * Returns copy of whole control register region - * Note: skip RAM address register because accessing it will - * cause bus hangs! - */ -static void getRegs(struct net_device *dev, struct ethtool_regs *regs, - void *p) -{ - DEV_NET *pNet = netdev_priv(dev); - const void __iomem *io = pNet->pAC->IoBase; - - regs->version = 1; - memset(p, 0, regs->len); - memcpy_fromio(p, io, B3_RAM_ADDR); - - memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, - regs->len - B3_RI_WTO_R1); -} - -const struct ethtool_ops SkGeEthtoolOps = { - .get_settings = getSettings, - .set_settings = setSettings, - .get_drvinfo = getDriverInfo, - .get_strings = getStrings, - .get_stats_count = getStatsCount, - .get_ethtool_stats = getEthtoolStats, - .phys_id = locateDevice, - .get_pauseparam = getPauseParams, - .set_pauseparam = setPauseParams, - .get_link = ethtool_op_get_link, - .get_sg = ethtool_op_get_sg, - .set_sg = setScatterGather, - .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = setTxCsum, - .get_rx_csum = getRxCsum, - .set_rx_csum = setRxCsum, - .get_regs = getRegs, - .get_regs_len = getRegsLen, -}; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c deleted file mode 100644 index 20890e4..0000000 --- a/drivers/net/sk98lin/skge.c +++ /dev/null @@ -1,5218 +0,0 @@ -/****************************************************************************** - * - * Name: skge.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.45 $ - * Date: $Date: 2004/02/12 14:41:02 $ - * Purpose: The main driver source module - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet - * Server Adapters. - * - * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and - * SysKonnects GEnesis Solaris driver - * Author: Christoph Goos (cgoos@syskonnect.de) - * Mirko Lindner (mlindner@syskonnect.de) - * - * Address all question to: linux@syskonnect.de - * - * The technical manual for the adapters is available from SysKonnect's - * web pages: www.syskonnect.com - * Goto "Support" and search Knowledge Base for "manual". - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Possible compiler options (#define xxx / -Dxxx): - * - * debugging can be enable by changing SK_DEBUG_CHKMOD and - * SK_DEBUG_CHKCAT in makefile (described there). - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This is the main module of the Linux GE driver. - * - * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h - * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters. - * Those are used for drivers on multiple OS', so some thing may seem - * unnecessary complicated on Linux. Please do not try to 'clean up' - * them without VERY good reasons, because this will make it more - * difficult to keep the Linux driver in synchronisation with the - * other versions. - * - * Include file hierarchy: - * - * - * - * "h/skdrv1st.h" - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * those three depending on kernel version used: - * - * - * - * - * - * "h/skerror.h" - * "h/skdebug.h" - * "h/sktypes.h" - * "h/lm80.h" - * "h/xmac_ii.h" - * - * "h/skdrv2nd.h" - * "h/skqueue.h" - * "h/skgehwt.h" - * "h/sktimer.h" - * "h/ski2c.h" - * "h/skgepnmi.h" - * "h/skvpd.h" - * "h/skgehw.h" - * "h/skgeinit.h" - * "h/skaddr.h" - * "h/skgesirq.h" - * "h/skrlmt.h" - * - ******************************************************************************/ - -#include "h/skversion.h" - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" - -/******************************************************************************* - * - * Defines - * - ******************************************************************************/ - -/* for debuging on x86 only */ -/* #define BREAKPOINT() asm(" int $3"); */ - -/* use the transmit hw checksum driver functionality */ -#define USE_SK_TX_CHECKSUM - -/* use the receive hw checksum driver functionality */ -#define USE_SK_RX_CHECKSUM - -/* use the scatter-gather functionality with sendfile() */ -#define SK_ZEROCOPY - -/* use of a transmit complete interrupt */ -#define USE_TX_COMPLETE - -/* - * threshold for copying small receive frames - * set to 0 to avoid copying, set to 9001 to copy all frames - */ -#define SK_COPY_THRESHOLD 50 - -/* number of adapters that can be configured via command line params */ -#define SK_MAX_CARD_PARAM 16 - - - -/* - * use those defines for a compile-in version of the driver instead - * of command line parameters - */ -// #define LINK_SPEED_A {"Auto", } -// #define LINK_SPEED_B {"Auto", } -// #define AUTO_NEG_A {"Sense", } -// #define AUTO_NEG_B {"Sense", } -// #define DUP_CAP_A {"Both", } -// #define DUP_CAP_B {"Both", } -// #define FLOW_CTRL_A {"SymOrRem", } -// #define FLOW_CTRL_B {"SymOrRem", } -// #define ROLE_A {"Auto", } -// #define ROLE_B {"Auto", } -// #define PREF_PORT {"A", } -// #define CON_TYPE {"Auto", } -// #define RLMT_MODE {"CheckLinkState", } - -#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb) -#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb) -#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb) - - -/* Set blink mode*/ -#define OEM_CONFIG_VALUE ( SK_ACT_LED_BLINK | \ - SK_DUP_LED_NORMAL | \ - SK_LED_LINK100_ON) - - -/* Isr return value */ -#define SkIsrRetVar irqreturn_t -#define SkIsrRetNone IRQ_NONE -#define SkIsrRetHandled IRQ_HANDLED - - -/******************************************************************************* - * - * Local Function Prototypes - * - ******************************************************************************/ - -static void FreeResources(struct SK_NET_DEVICE *dev); -static int SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC); -static SK_BOOL BoardAllocMem(SK_AC *pAC); -static void BoardFreeMem(SK_AC *pAC); -static void BoardInitMem(SK_AC *pAC); -static void SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL); -static SkIsrRetVar SkGeIsr(int irq, void *dev_id); -static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id); -static int SkGeOpen(struct SK_NET_DEVICE *dev); -static int SkGeClose(struct SK_NET_DEVICE *dev); -static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev); -static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p); -static void SkGeSetRxMode(struct SK_NET_DEVICE *dev); -static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev); -static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd); -static void GetConfiguration(SK_AC*); -static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*); -static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*); -static void FillRxRing(SK_AC*, RX_PORT*); -static SK_BOOL FillRxDescriptor(SK_AC*, RX_PORT*); -static void ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL); -static void ClearAndStartRx(SK_AC*, int); -static void ClearTxIrq(SK_AC*, int, int); -static void ClearRxRing(SK_AC*, RX_PORT*); -static void ClearTxRing(SK_AC*, TX_PORT*); -static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu); -static void PortReInitBmu(SK_AC*, int); -static int SkGeIocMib(DEV_NET*, unsigned int, int); -static int SkGeInitPCI(SK_AC *pAC); -static void StartDrvCleanupTimer(SK_AC *pAC); -static void StopDrvCleanupTimer(SK_AC *pAC); -static int XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*); - -#ifdef SK_DIAG_SUPPORT -static SK_U32 ParseDeviceNbrFromSlotName(const char *SlotName); -static int SkDrvInitAdapter(SK_AC *pAC, int devNbr); -static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); -#endif - -/******************************************************************************* - * - * Extern Function Prototypes - * - ******************************************************************************/ -extern void SkDimEnableModerationIfNeeded(SK_AC *pAC); -extern void SkDimDisplayModerationSettings(SK_AC *pAC); -extern void SkDimStartModerationTimer(SK_AC *pAC); -extern void SkDimModerate(SK_AC *pAC); -extern void SkGeBlinkTimer(unsigned long data); - -#ifdef DEBUG -static void DumpMsg(struct sk_buff*, char*); -static void DumpData(char*, int); -static void DumpLong(char*, int); -#endif - -/* global variables *********************************************************/ -static SK_BOOL DoPrintInterfaceChange = SK_TRUE; -extern const struct ethtool_ops SkGeEthtoolOps; - -/* local variables **********************************************************/ -static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}}; -static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; - -/***************************************************************************** - * - * SkPciWriteCfgDWord - write a 32 bit value to pci config space - * - * Description: - * This routine writes a 32 bit value to the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -static inline int SkPciWriteCfgDWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U32 Val) /* pointer to store the read value */ -{ - pci_write_config_dword(pAC->PciDev, PciAddr, Val); - return(0); -} /* SkPciWriteCfgDWord */ - -/***************************************************************************** - * - * SkGeInitPCI - Init the PCI resources - * - * Description: - * This function initialize the PCI resources and IO - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -static __devinit int SkGeInitPCI(SK_AC *pAC) -{ - struct SK_NET_DEVICE *dev = pAC->dev[0]; - struct pci_dev *pdev = pAC->PciDev; - int retval; - - dev->mem_start = pci_resource_start (pdev, 0); - pci_set_master(pdev); - - retval = pci_request_regions(pdev, "sk98lin"); - if (retval) - goto out; - -#ifdef SK_BIG_ENDIAN - /* - * On big endian machines, we use the adapter's aibility of - * reading the descriptors as big endian. - */ - { - SK_U32 our2; - SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2); - our2 |= PCI_REV_DESC; - SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2); - } -#endif - - /* - * Remap the regs into kernel space. - */ - pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000); - if (!pAC->IoBase) { - retval = -EIO; - goto out_release; - } - - return 0; - - out_release: - pci_release_regions(pdev); - out: - return retval; -} - - -/***************************************************************************** - * - * FreeResources - release resources allocated for adapter - * - * Description: - * This function releases the IRQ, unmaps the IO and - * frees the desriptor ring. - * - * Returns: N/A - * - */ -static void FreeResources(struct SK_NET_DEVICE *dev) -{ -SK_U32 AllocFlag; -DEV_NET *pNet; -SK_AC *pAC; - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - AllocFlag = pAC->AllocFlag; - if (pAC->PciDev) { - pci_release_regions(pAC->PciDev); - } - if (AllocFlag & SK_ALLOC_IRQ) { - free_irq(dev->irq, dev); - } - if (pAC->IoBase) { - iounmap(pAC->IoBase); - } - if (pAC->pDescrMem) { - BoardFreeMem(pAC); - } - -} /* FreeResources */ - -MODULE_AUTHOR("Mirko Lindner "); -MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver"); -MODULE_LICENSE("GPL"); - -#ifdef LINK_SPEED_A -static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED; -#else -static char *Speed_A[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef LINK_SPEED_B -static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED; -#else -static char *Speed_B[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef AUTO_NEG_A -static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A; -#else -static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef DUP_CAP_A -static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A; -#else -static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef FLOW_CTRL_A -static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A; -#else -static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef ROLE_A -static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A; -#else -static char *Role_A[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef AUTO_NEG_B -static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B; -#else -static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef DUP_CAP_B -static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B; -#else -static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef FLOW_CTRL_B -static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B; -#else -static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef ROLE_B -static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B; -#else -static char *Role_B[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef CON_TYPE -static char *ConType[SK_MAX_CARD_PARAM] = CON_TYPE; -#else -static char *ConType[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef PREF_PORT -static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT; -#else -static char *PrefPort[SK_MAX_CARD_PARAM] = {"", }; -#endif - -#ifdef RLMT_MODE -static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE; -#else -static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", }; -#endif - -static int IntsPerSec[SK_MAX_CARD_PARAM]; -static char *Moderation[SK_MAX_CARD_PARAM]; -static char *ModerationMask[SK_MAX_CARD_PARAM]; -static char *AutoSizing[SK_MAX_CARD_PARAM]; -static char *Stats[SK_MAX_CARD_PARAM]; - -module_param_array(Speed_A, charp, NULL, 0); -module_param_array(Speed_B, charp, NULL, 0); -module_param_array(AutoNeg_A, charp, NULL, 0); -module_param_array(AutoNeg_B, charp, NULL, 0); -module_param_array(DupCap_A, charp, NULL, 0); -module_param_array(DupCap_B, charp, NULL, 0); -module_param_array(FlowCtrl_A, charp, NULL, 0); -module_param_array(FlowCtrl_B, charp, NULL, 0); -module_param_array(Role_A, charp, NULL, 0); -module_param_array(Role_B, charp, NULL, 0); -module_param_array(ConType, charp, NULL, 0); -module_param_array(PrefPort, charp, NULL, 0); -module_param_array(RlmtMode, charp, NULL, 0); -/* used for interrupt moderation */ -module_param_array(IntsPerSec, int, NULL, 0); -module_param_array(Moderation, charp, NULL, 0); -module_param_array(Stats, charp, NULL, 0); -module_param_array(ModerationMask, charp, NULL, 0); -module_param_array(AutoSizing, charp, NULL, 0); - -/***************************************************************************** - * - * SkGeBoardInit - do level 0 and 1 initialization - * - * Description: - * This function prepares the board hardware for running. The desriptor - * ring is set up, the IRQ is allocated and the configuration settings - * are examined. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC) -{ -short i; -unsigned long Flags; -char *DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */ -char *VerStr = VER_STRING; -int Ret; /* return code of request_irq */ -SK_BOOL DualNet; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("IoBase: %08lX\n", (unsigned long)pAC->IoBase)); - for (i=0; iTxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0]; - pAC->TxPort[i][0].PortIndex = i; - pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i]; - pAC->RxPort[i].PortIndex = i; - } - - /* Initialize the mutexes */ - for (i=0; iTxPort[i][0].TxDesRingLock); - spin_lock_init(&pAC->RxPort[i].RxDesRingLock); - } - spin_lock_init(&pAC->SlowPathLock); - - /* setup phy_id blink timer */ - pAC->BlinkTimer.function = SkGeBlinkTimer; - pAC->BlinkTimer.data = (unsigned long) dev; - init_timer(&pAC->BlinkTimer); - - /* level 0 init common modules here */ - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - /* Does a RESET on board ...*/ - if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) { - printk("HWInit (0) failed.\n"); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - return -EIO; - } - SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA); - SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA); - SkPnmiInit( pAC, pAC->IoBase, SK_INIT_DATA); - SkAddrInit( pAC, pAC->IoBase, SK_INIT_DATA); - SkRlmtInit( pAC, pAC->IoBase, SK_INIT_DATA); - SkTimerInit(pAC, pAC->IoBase, SK_INIT_DATA); - - pAC->BoardLevel = SK_INIT_DATA; - pAC->RxBufSize = ETH_BUF_SIZE; - - SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString); - SK_PNMI_SET_DRIVER_VER(pAC, VerStr); - - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - /* level 1 init common modules here (HW init) */ - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { - printk("sk98lin: HWInit (1) failed.\n"); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - return -EIO; - } - SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); - SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); - SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); - SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); - SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); - SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); - - /* Set chipset type support */ - pAC->ChipsetType = 0; - if ((pAC->GIni.GIChipId == CHIP_ID_YUKON) || - (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE)) { - pAC->ChipsetType = 1; - } - - GetConfiguration(pAC); - if (pAC->RlmtNets == 2) { - pAC->GIni.GIPortUsage = SK_MUL_LINK; - } - - pAC->BoardLevel = SK_INIT_IO; - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - if (pAC->GIni.GIMacsFound == 2) { - Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); - } else if (pAC->GIni.GIMacsFound == 1) { - Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, - "sk98lin", dev); - } else { - printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n", - pAC->GIni.GIMacsFound); - return -EIO; - } - - if (Ret) { - printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n", - dev->irq); - return Ret; - } - pAC->AllocFlag |= SK_ALLOC_IRQ; - - /* Alloc memory for this board (Mem for RxD/TxD) : */ - if(!BoardAllocMem(pAC)) { - printk("No memory for descriptor rings.\n"); - return -ENOMEM; - } - - BoardInitMem(pAC); - /* tschilling: New common function with minimum size check. */ - DualNet = SK_FALSE; - if (pAC->RlmtNets == 2) { - DualNet = SK_TRUE; - } - - if (SkGeInitAssignRamToQueues( - pAC, - pAC->ActivePort, - DualNet)) { - BoardFreeMem(pAC); - printk("sk98lin: SkGeInitAssignRamToQueues failed.\n"); - return -EIO; - } - - return (0); -} /* SkGeBoardInit */ - - -/***************************************************************************** - * - * BoardAllocMem - allocate the memory for the descriptor rings - * - * Description: - * This function allocates the memory for all descriptor rings. - * Each ring is aligned for the desriptor alignment and no ring - * has a 4 GByte boundary in it (because the upper 32 bit must - * be constant for all descriptiors in one rings). - * - * Returns: - * SK_TRUE, if all memory could be allocated - * SK_FALSE, if not - */ -static __devinit SK_BOOL BoardAllocMem(SK_AC *pAC) -{ -caddr_t pDescrMem; /* pointer to descriptor memory area */ -size_t AllocLength; /* length of complete descriptor area */ -int i; /* loop counter */ -unsigned long BusAddr; - - - /* rings plus one for alignment (do not cross 4 GB boundary) */ - /* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */ -#if (BITS_PER_LONG == 32) - AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; -#else - AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound - + RX_RING_SIZE + 8; -#endif - - pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength, - &pAC->pDescrMemDMA); - - if (pDescrMem == NULL) { - return (SK_FALSE); - } - pAC->pDescrMem = pDescrMem; - BusAddr = (unsigned long) pAC->pDescrMemDMA; - - /* Descriptors need 8 byte alignment, and this is ensured - * by pci_alloc_consistent. - */ - for (i=0; iGIni.GIMacsFound; i++) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, - ("TX%d/A: pDescrMem: %lX, PhysDescrMem: %lX\n", - i, (unsigned long) pDescrMem, - BusAddr)); - pAC->TxPort[i][0].pTxDescrRing = pDescrMem; - pAC->TxPort[i][0].VTxDescrRing = BusAddr; - pDescrMem += TX_RING_SIZE; - BusAddr += TX_RING_SIZE; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, - ("RX%d: pDescrMem: %lX, PhysDescrMem: %lX\n", - i, (unsigned long) pDescrMem, - (unsigned long)BusAddr)); - pAC->RxPort[i].pRxDescrRing = pDescrMem; - pAC->RxPort[i].VRxDescrRing = BusAddr; - pDescrMem += RX_RING_SIZE; - BusAddr += RX_RING_SIZE; - } /* for */ - - return (SK_TRUE); -} /* BoardAllocMem */ - - -/**************************************************************************** - * - * BoardFreeMem - reverse of BoardAllocMem - * - * Description: - * Free all memory allocated in BoardAllocMem: adapter context, - * descriptor rings, locks. - * - * Returns: N/A - */ -static void BoardFreeMem( -SK_AC *pAC) -{ -size_t AllocLength; /* length of complete descriptor area */ - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("BoardFreeMem\n")); -#if (BITS_PER_LONG == 32) - AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; -#else - AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound - + RX_RING_SIZE + 8; -#endif - - pci_free_consistent(pAC->PciDev, AllocLength, - pAC->pDescrMem, pAC->pDescrMemDMA); - pAC->pDescrMem = NULL; -} /* BoardFreeMem */ - - -/***************************************************************************** - * - * BoardInitMem - initiate the descriptor rings - * - * Description: - * This function sets the descriptor rings up in memory. - * The adapter is initialized with the descriptor start addresses. - * - * Returns: N/A - */ -static __devinit void BoardInitMem(SK_AC *pAC) -{ -int i; /* loop counter */ -int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/ -int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/ - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("BoardInitMem\n")); - - RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; - pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize; - TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; - pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize; - - for (i=0; iGIni.GIMacsFound; i++) { - SetupRing( - pAC, - pAC->TxPort[i][0].pTxDescrRing, - pAC->TxPort[i][0].VTxDescrRing, - (RXD**)&pAC->TxPort[i][0].pTxdRingHead, - (RXD**)&pAC->TxPort[i][0].pTxdRingTail, - (RXD**)&pAC->TxPort[i][0].pTxdRingPrev, - &pAC->TxPort[i][0].TxdRingFree, - SK_TRUE); - SetupRing( - pAC, - pAC->RxPort[i].pRxDescrRing, - pAC->RxPort[i].VRxDescrRing, - &pAC->RxPort[i].pRxdRingHead, - &pAC->RxPort[i].pRxdRingTail, - &pAC->RxPort[i].pRxdRingPrev, - &pAC->RxPort[i].RxdRingFree, - SK_FALSE); - } -} /* BoardInitMem */ - - -/***************************************************************************** - * - * SetupRing - create one descriptor ring - * - * Description: - * This function creates one descriptor ring in the given memory area. - * The head, tail and number of free descriptors in the ring are set. - * - * Returns: - * none - */ -static void SetupRing( -SK_AC *pAC, -void *pMemArea, /* a pointer to the memory area for the ring */ -uintptr_t VMemArea, /* the virtual bus address of the memory area */ -RXD **ppRingHead, /* address where the head should be written */ -RXD **ppRingTail, /* address where the tail should be written */ -RXD **ppRingPrev, /* address where the tail should be written */ -int *pRingFree, /* address where the # of free descr. goes */ -SK_BOOL IsTx) /* flag: is this a tx ring */ -{ -int i; /* loop counter */ -int DescrSize; /* the size of a descriptor rounded up to alignment*/ -int DescrNum; /* number of descriptors per ring */ -RXD *pDescr; /* pointer to a descriptor (receive or transmit) */ -RXD *pNextDescr; /* pointer to the next descriptor */ -RXD *pPrevDescr; /* pointer to the previous descriptor */ -uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ - - if (IsTx == SK_TRUE) { - DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * - DESCR_ALIGN; - DescrNum = TX_RING_SIZE / DescrSize; - } else { - DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * - DESCR_ALIGN; - DescrNum = RX_RING_SIZE / DescrSize; - } - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, - ("Descriptor size: %d Descriptor Number: %d\n", - DescrSize,DescrNum)); - - pDescr = (RXD*) pMemArea; - pPrevDescr = NULL; - pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); - VNextDescr = VMemArea + DescrSize; - for(i=0; iVNextRxd = VNextDescr & 0xffffffffULL; - pDescr->pNextRxd = pNextDescr; - if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN; - - /* advance one step */ - pPrevDescr = pDescr; - pDescr = pNextDescr; - pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); - VNextDescr += DescrSize; - } - pPrevDescr->pNextRxd = (RXD*) pMemArea; - pPrevDescr->VNextRxd = VMemArea; - pDescr = (RXD*) pMemArea; - *ppRingHead = (RXD*) pMemArea; - *ppRingTail = *ppRingHead; - *ppRingPrev = pPrevDescr; - *pRingFree = DescrNum; -} /* SetupRing */ - - -/***************************************************************************** - * - * PortReInitBmu - re-initiate the descriptor rings for one port - * - * Description: - * This function reinitializes the descriptor rings of one port - * in memory. The port must be stopped before. - * The HW is initialized with the descriptor start addresses. - * - * Returns: - * none - */ -static void PortReInitBmu( -SK_AC *pAC, /* pointer to adapter context */ -int PortIndex) /* index of the port for which to re-init */ -{ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("PortReInitBmu ")); - - /* set address of first descriptor of ring in BMU */ - SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_L, - (uint32_t)(((caddr_t) - (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - - pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + - pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) & - 0xFFFFFFFF)); - SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_H, - (uint32_t)(((caddr_t) - (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - - pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + - pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32)); - SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_L, - (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - - pAC->RxPort[PortIndex].pRxDescrRing + - pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF)); - SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_H, - (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - - pAC->RxPort[PortIndex].pRxDescrRing + - pAC->RxPort[PortIndex].VRxDescrRing) >> 32)); -} /* PortReInitBmu */ - - -/**************************************************************************** - * - * SkGeIsr - handle adapter interrupts - * - * Description: - * The interrupt routine is called when the network adapter - * generates an interrupt. It may also be called if another device - * shares this interrupt vector with the driver. - * - * Returns: N/A - * - */ -static SkIsrRetVar SkGeIsr(int irq, void *dev_id) -{ -struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; -DEV_NET *pNet; -SK_AC *pAC; -SK_U32 IntSrc; /* interrupts source register contents */ - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - /* - * Check and process if its our interrupt - */ - SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); - if (IntSrc == 0) { - return SkIsrRetNone; - } - - while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { -#if 0 /* software irq currently not used */ - if (IntSrc & IS_IRQ_SW) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("Software IRQ\n")); - } -#endif - if (IntSrc & IS_R1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF RX1 IRQ\n")); - ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); - SK_PNMI_CNT_RX_INTR(pAC, 0); - } - if (IntSrc & IS_R2_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF RX2 IRQ\n")); - ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); - SK_PNMI_CNT_RX_INTR(pAC, 1); - } -#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ - if (IntSrc & IS_XA1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF AS TX1 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 0); - spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); - FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); - spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); - } - if (IntSrc & IS_XA2_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF AS TX2 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 1); - spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); - FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]); - spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); - } -#if 0 /* only if sync. queues used */ - if (IntSrc & IS_XS1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF SY TX1 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 1); - spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); - FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); - spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); - ClearTxIrq(pAC, 0, TX_PRIO_HIGH); - } - if (IntSrc & IS_XS2_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF SY TX2 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 1); - spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); - FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH); - spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); - ClearTxIrq(pAC, 1, TX_PRIO_HIGH); - } -#endif -#endif - - /* do all IO at once */ - if (IntSrc & IS_R1_F) - ClearAndStartRx(pAC, 0); - if (IntSrc & IS_R2_F) - ClearAndStartRx(pAC, 1); -#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ - if (IntSrc & IS_XA1_F) - ClearTxIrq(pAC, 0, TX_PRIO_LOW); - if (IntSrc & IS_XA2_F) - ClearTxIrq(pAC, 1, TX_PRIO_LOW); -#endif - SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); - } /* while (IntSrc & IRQ_MASK != 0) */ - - IntSrc &= pAC->GIni.GIValIrqMask; - if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, - ("SPECIAL IRQ DP-Cards => %x\n", IntSrc)); - pAC->CheckQueue = SK_FALSE; - spin_lock(&pAC->SlowPathLock); - if (IntSrc & SPECIAL_IRQS) - SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); - - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock(&pAC->SlowPathLock); - } - /* - * do it all again is case we cleared an interrupt that - * came in after handling the ring (OUTs may be delayed - * in hardware buffers, but are through after IN) - * - * rroesler: has been commented out and shifted to - * SkGeDrvEvent(), because it is timer - * guarded now - * - ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); - ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); - */ - - if (pAC->CheckQueue) { - pAC->CheckQueue = SK_FALSE; - spin_lock(&pAC->SlowPathLock); - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock(&pAC->SlowPathLock); - } - - /* IRQ is processed - Enable IRQs again*/ - SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); - - return SkIsrRetHandled; -} /* SkGeIsr */ - - -/**************************************************************************** - * - * SkGeIsrOnePort - handle adapter interrupts for single port adapter - * - * Description: - * The interrupt routine is called when the network adapter - * generates an interrupt. It may also be called if another device - * shares this interrupt vector with the driver. - * This is the same as above, but handles only one port. - * - * Returns: N/A - * - */ -static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id) -{ -struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; -DEV_NET *pNet; -SK_AC *pAC; -SK_U32 IntSrc; /* interrupts source register contents */ - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - /* - * Check and process if its our interrupt - */ - SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); - if (IntSrc == 0) { - return SkIsrRetNone; - } - - while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { -#if 0 /* software irq currently not used */ - if (IntSrc & IS_IRQ_SW) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("Software IRQ\n")); - } -#endif - if (IntSrc & IS_R1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF RX1 IRQ\n")); - ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); - SK_PNMI_CNT_RX_INTR(pAC, 0); - } -#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ - if (IntSrc & IS_XA1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF AS TX1 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 0); - spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); - FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); - spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); - } -#if 0 /* only if sync. queues used */ - if (IntSrc & IS_XS1_F) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_INT_SRC, - ("EOF SY TX1 IRQ\n")); - SK_PNMI_CNT_TX_INTR(pAC, 0); - spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); - FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); - spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); - ClearTxIrq(pAC, 0, TX_PRIO_HIGH); - } -#endif -#endif - - /* do all IO at once */ - if (IntSrc & IS_R1_F) - ClearAndStartRx(pAC, 0); -#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ - if (IntSrc & IS_XA1_F) - ClearTxIrq(pAC, 0, TX_PRIO_LOW); -#endif - SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); - } /* while (IntSrc & IRQ_MASK != 0) */ - - IntSrc &= pAC->GIni.GIValIrqMask; - if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, - ("SPECIAL IRQ SP-Cards => %x\n", IntSrc)); - pAC->CheckQueue = SK_FALSE; - spin_lock(&pAC->SlowPathLock); - if (IntSrc & SPECIAL_IRQS) - SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); - - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock(&pAC->SlowPathLock); - } - /* - * do it all again is case we cleared an interrupt that - * came in after handling the ring (OUTs may be delayed - * in hardware buffers, but are through after IN) - * - * rroesler: has been commented out and shifted to - * SkGeDrvEvent(), because it is timer - * guarded now - * - ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); - */ - - /* IRQ is processed - Enable IRQs again*/ - SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); - - return SkIsrRetHandled; -} /* SkGeIsrOnePort */ - -#ifdef CONFIG_NET_POLL_CONTROLLER -/**************************************************************************** - * - * SkGePollController - polling receive, for netconsole - * - * Description: - * Polling receive - used by netconsole and other diagnostic tools - * to allow network i/o with interrupts disabled. - * - * Returns: N/A - */ -static void SkGePollController(struct net_device *dev) -{ - disable_irq(dev->irq); - SkGeIsr(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -/**************************************************************************** - * - * SkGeOpen - handle start of initialized adapter - * - * Description: - * This function starts the initialized adapter. - * The board level variable is set and the adapter is - * brought to full functionality. - * The device flags are set for operation. - * Do all necessary level 2 initialization, enable interrupts and - * give start command to RLMT. - * - * Returns: - * 0 on success - * != 0 on error - */ -static int SkGeOpen( -struct SK_NET_DEVICE *dev) -{ - DEV_NET *pNet; - SK_AC *pAC; - unsigned long Flags; /* for spin lock */ - int i; - SK_EVPARA EvPara; /* an event parameter union */ - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC)); - -#ifdef SK_DIAG_SUPPORT - if (pAC->DiagModeActive == DIAG_ACTIVE) { - if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { - return (-1); /* still in use by diag; deny actions */ - } - } -#endif - - /* Set blink mode */ - if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab )) - pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE; - - if (pAC->BoardLevel == SK_INIT_DATA) { - /* level 1 init common modules here */ - if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { - printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name); - return (-1); - } - SkI2cInit (pAC, pAC->IoBase, SK_INIT_IO); - SkEventInit (pAC, pAC->IoBase, SK_INIT_IO); - SkPnmiInit (pAC, pAC->IoBase, SK_INIT_IO); - SkAddrInit (pAC, pAC->IoBase, SK_INIT_IO); - SkRlmtInit (pAC, pAC->IoBase, SK_INIT_IO); - SkTimerInit (pAC, pAC->IoBase, SK_INIT_IO); - pAC->BoardLevel = SK_INIT_IO; - } - - if (pAC->BoardLevel != SK_INIT_RUN) { - /* tschilling: Level 2 init modules here, check return value. */ - if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) { - printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name); - return (-1); - } - SkI2cInit (pAC, pAC->IoBase, SK_INIT_RUN); - SkEventInit (pAC, pAC->IoBase, SK_INIT_RUN); - SkPnmiInit (pAC, pAC->IoBase, SK_INIT_RUN); - SkAddrInit (pAC, pAC->IoBase, SK_INIT_RUN); - SkRlmtInit (pAC, pAC->IoBase, SK_INIT_RUN); - SkTimerInit (pAC, pAC->IoBase, SK_INIT_RUN); - pAC->BoardLevel = SK_INIT_RUN; - } - - for (i=0; iGIni.GIMacsFound; i++) { - /* Enable transmit descriptor polling. */ - SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); - FillRxRing(pAC, &pAC->RxPort[i]); - } - SkGeYellowLED(pAC, pAC->IoBase, 1); - - StartDrvCleanupTimer(pAC); - SkDimEnableModerationIfNeeded(pAC); - SkDimDisplayModerationSettings(pAC); - - pAC->GIni.GIValIrqMask &= IRQ_MASK; - - /* enable Interrupts */ - SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); - SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - - if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) { - EvPara.Para32[0] = pAC->RlmtNets; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, - EvPara); - EvPara.Para32[0] = pAC->RlmtMode; - EvPara.Para32[1] = 0; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE, - EvPara); - } - - EvPara.Para32[0] = pNet->NetNr; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - pAC->MaxPorts++; - - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeOpen suceeded\n")); - - return (0); -} /* SkGeOpen */ - - -/**************************************************************************** - * - * SkGeClose - Stop initialized adapter - * - * Description: - * Close initialized adapter. - * - * Returns: - * 0 - on success - * error code - on error - */ -static int SkGeClose( -struct SK_NET_DEVICE *dev) -{ - DEV_NET *pNet; - DEV_NET *newPtrNet; - SK_AC *pAC; - - unsigned long Flags; /* for spin lock */ - int i; - int PortIdx; - SK_EVPARA EvPara; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeClose: pAC=0x%lX ", (unsigned long)pAC)); - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - -#ifdef SK_DIAG_SUPPORT - if (pAC->DiagModeActive == DIAG_ACTIVE) { - if (pAC->DiagFlowCtrl == SK_FALSE) { - /* - ** notify that the interface which has been closed - ** by operator interaction must not be started up - ** again when the DIAG has finished. - */ - newPtrNet = netdev_priv(pAC->dev[0]); - if (newPtrNet == pNet) { - pAC->WasIfUp[0] = SK_FALSE; - } else { - pAC->WasIfUp[1] = SK_FALSE; - } - return 0; /* return to system everything is fine... */ - } else { - pAC->DiagFlowCtrl = SK_FALSE; - } - } -#endif - - netif_stop_queue(dev); - - if (pAC->RlmtNets == 1) - PortIdx = pAC->ActivePort; - else - PortIdx = pNet->NetNr; - - StopDrvCleanupTimer(pAC); - - /* - * Clear multicast table, promiscuous mode .... - */ - SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); - SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, - SK_PROM_MODE_NONE); - - if (pAC->MaxPorts == 1) { - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - /* disable interrupts */ - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - EvPara.Para32[0] = pNet->NetNr; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - /* stop the hardware */ - SkGeDeInit(pAC, pAC->IoBase); - pAC->BoardLevel = SK_INIT_DATA; - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - } else { - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - EvPara.Para32[0] = pNet->NetNr; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - SkPnmiEvent(pAC, pAC->IoBase, SK_PNMI_EVT_XMAC_RESET, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - /* Stop port */ - spin_lock_irqsave(&pAC->TxPort[pNet->PortNr] - [TX_PRIO_LOW].TxDesRingLock, Flags); - SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, - SK_STOP_ALL, SK_HARD_RST); - spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr] - [TX_PRIO_LOW].TxDesRingLock, Flags); - } - - if (pAC->RlmtNets == 1) { - /* clear all descriptor rings */ - for (i=0; iGIni.GIMacsFound; i++) { - ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); - ClearRxRing(pAC, &pAC->RxPort[i]); - ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]); - } - } else { - /* clear port descriptor rings */ - ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE); - ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]); - ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]); - } - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeClose: done ")); - - SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA)); - SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), - sizeof(SK_PNMI_STRUCT_DATA)); - - pAC->MaxPorts--; - - return (0); -} /* SkGeClose */ - - -/***************************************************************************** - * - * SkGeXmit - Linux frame transmit function - * - * Description: - * The system calls this function to send frames onto the wire. - * It puts the frame in the tx descriptor ring. If the ring is - * full then, the 'tbusy' flag is set. - * - * Returns: - * 0, if everything is ok - * !=0, on error - * WARNING: returning 1 in 'tbusy' case caused system crashes (double - * allocated skb's) !!! - */ -static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev) -{ -DEV_NET *pNet; -SK_AC *pAC; -int Rc; /* return code of XmitFrame */ - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - if ((!skb_shinfo(skb)->nr_frags) || - (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) { - /* Don't activate scatter-gather and hardware checksum */ - - if (pAC->RlmtNets == 2) - Rc = XmitFrame( - pAC, - &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], - skb); - else - Rc = XmitFrame( - pAC, - &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], - skb); - } else { - /* scatter-gather and hardware TCP checksumming anabled*/ - if (pAC->RlmtNets == 2) - Rc = XmitFrameSG( - pAC, - &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], - skb); - else - Rc = XmitFrameSG( - pAC, - &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], - skb); - } - - /* Transmitter out of resources? */ - if (Rc <= 0) { - netif_stop_queue(dev); - } - - /* If not taken, give buffer ownership back to the - * queueing layer. - */ - if (Rc < 0) - return (1); - - dev->trans_start = jiffies; - return (0); -} /* SkGeXmit */ - - -/***************************************************************************** - * - * XmitFrame - fill one socket buffer into the transmit ring - * - * Description: - * This function puts a message into the transmit descriptor ring - * if there is a descriptors left. - * Linux skb's consist of only one continuous buffer. - * The first step locks the ring. It is held locked - * all time to avoid problems with SWITCH_../PORT_RESET. - * Then the descriptoris allocated. - * The second part is linking the buffer to the descriptor. - * At the very last, the Control field of the descriptor - * is made valid for the BMU and a start TX command is given - * if necessary. - * - * Returns: - * > 0 - on succes: the number of bytes in the message - * = 0 - on resource shortage: this frame sent or dropped, now - * the ring is full ( -> set tbusy) - * < 0 - on failure: other problems ( -> return failure to upper layers) - */ -static int XmitFrame( -SK_AC *pAC, /* pointer to adapter context */ -TX_PORT *pTxPort, /* pointer to struct of port to send to */ -struct sk_buff *pMessage) /* pointer to send-message */ -{ - TXD *pTxd; /* the rxd to fill */ - TXD *pOldTxd; - unsigned long Flags; - SK_U64 PhysAddr; - int BytesSend = pMessage->len; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X")); - - spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); -#ifndef USE_TX_COMPLETE - FreeTxDescriptors(pAC, pTxPort); -#endif - if (pTxPort->TxdRingFree == 0) { - /* - ** no enough free descriptors in ring at the moment. - ** Maybe free'ing some old one help? - */ - FreeTxDescriptors(pAC, pTxPort); - if (pTxPort->TxdRingFree == 0) { - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); - SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_TX_PROGRESS, - ("XmitFrame failed\n")); - /* - ** the desired message can not be sent - ** Because tbusy seems to be set, the message - ** should not be freed here. It will be used - ** by the scheduler of the ethernet handler - */ - return (-1); - } - } - - /* - ** If the passed socket buffer is of smaller MTU-size than 60, - ** copy everything into new buffer and fill all bytes between - ** the original packet end and the new packet end of 60 with 0x00. - ** This is to resolve faulty padding by the HW with 0xaa bytes. - */ - if (BytesSend < C_LEN_ETHERNET_MINSIZE) { - if (skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) { - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); - return 0; - } - pMessage->len = C_LEN_ETHERNET_MINSIZE; - } - - /* - ** advance head counter behind descriptor needed for this frame, - ** so that needed descriptor is reserved from that on. The next - ** action will be to add the passed buffer to the TX-descriptor - */ - pTxd = pTxPort->pTxdRingHead; - pTxPort->pTxdRingHead = pTxd->pNextTxd; - pTxPort->TxdRingFree--; - -#ifdef SK_DUMP_TX - DumpMsg(pMessage, "XmitFrame"); -#endif - - /* - ** First step is to map the data to be sent via the adapter onto - ** the DMA memory. Kernel 2.2 uses virt_to_bus(), but kernels 2.4 - ** and 2.6 need to use pci_map_page() for that mapping. - */ - PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, - virt_to_page(pMessage->data), - ((unsigned long) pMessage->data & ~PAGE_MASK), - pMessage->len, - PCI_DMA_TODEVICE); - pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); - pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); - pTxd->pMBuf = pMessage; - - if (pMessage->ip_summed == CHECKSUM_PARTIAL) { - u16 hdrlen = skb_transport_offset(pMessage); - u16 offset = hdrlen + pMessage->csum_offset; - - if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && - (pAC->GIni.GIChipRev == 0) && - (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - pTxd->TBControl = BMU_TCP_CHECK; - } else { - pTxd->TBControl = BMU_UDP_CHECK; - } - - pTxd->TcpSumOfs = 0; - pTxd->TcpSumSt = hdrlen; - pTxd->TcpSumWr = offset; - - pTxd->TBControl |= BMU_OWN | BMU_STF | - BMU_SW | BMU_EOF | -#ifdef USE_TX_COMPLETE - BMU_IRQ_EOF | -#endif - pMessage->len; - } else { - pTxd->TBControl = BMU_OWN | BMU_STF | BMU_CHECK | - BMU_SW | BMU_EOF | -#ifdef USE_TX_COMPLETE - BMU_IRQ_EOF | -#endif - pMessage->len; - } - - /* - ** If previous descriptor already done, give TX start cmd - */ - pOldTxd = xchg(&pTxPort->pTxdRingPrev, pTxd); - if ((pOldTxd->TBControl & BMU_OWN) == 0) { - SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); - } - - /* - ** after releasing the lock, the skb may immediately be free'd - */ - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); - if (pTxPort->TxdRingFree != 0) { - return (BytesSend); - } else { - return (0); - } - -} /* XmitFrame */ - -/***************************************************************************** - * - * XmitFrameSG - fill one socket buffer into the transmit ring - * (use SG and TCP/UDP hardware checksumming) - * - * Description: - * This function puts a message into the transmit descriptor ring - * if there is a descriptors left. - * - * Returns: - * > 0 - on succes: the number of bytes in the message - * = 0 - on resource shortage: this frame sent or dropped, now - * the ring is full ( -> set tbusy) - * < 0 - on failure: other problems ( -> return failure to upper layers) - */ -static int XmitFrameSG( -SK_AC *pAC, /* pointer to adapter context */ -TX_PORT *pTxPort, /* pointer to struct of port to send to */ -struct sk_buff *pMessage) /* pointer to send-message */ -{ - - TXD *pTxd; - TXD *pTxdFst; - TXD *pTxdLst; - int CurrFrag; - int BytesSend; - skb_frag_t *sk_frag; - SK_U64 PhysAddr; - unsigned long Flags; - SK_U32 Control; - - spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); -#ifndef USE_TX_COMPLETE - FreeTxDescriptors(pAC, pTxPort); -#endif - if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) { - FreeTxDescriptors(pAC, pTxPort); - if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) { - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); - SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_TX_PROGRESS, - ("XmitFrameSG failed - Ring full\n")); - /* this message can not be sent now */ - return(-1); - } - } - - pTxd = pTxPort->pTxdRingHead; - pTxdFst = pTxd; - pTxdLst = pTxd; - BytesSend = 0; - - /* - ** Map the first fragment (header) into the DMA-space - */ - PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, - virt_to_page(pMessage->data), - ((unsigned long) pMessage->data & ~PAGE_MASK), - skb_headlen(pMessage), - PCI_DMA_TODEVICE); - - pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); - pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); - - /* - ** Does the HW need to evaluate checksum for TCP or UDP packets? - */ - if (pMessage->ip_summed == CHECKSUM_PARTIAL) { - u16 hdrlen = skb_transport_offset(pMessage); - u16 offset = hdrlen + pMessage->csum_offset; - - Control = BMU_STFWD; - - /* - ** We have to use the opcode for tcp here, because the - ** opcode for udp is not working in the hardware yet - ** (Revision 2.0) - */ - if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && - (pAC->GIni.GIChipRev == 0) && - (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - Control |= BMU_TCP_CHECK; - } else { - Control |= BMU_UDP_CHECK; - } - - pTxd->TcpSumOfs = 0; - pTxd->TcpSumSt = hdrlen; - pTxd->TcpSumWr = offset; - } else - Control = BMU_CHECK | BMU_SW; - - pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage); - - pTxd = pTxd->pNextTxd; - pTxPort->TxdRingFree--; - BytesSend += skb_headlen(pMessage); - - /* - ** Browse over all SG fragments and map each of them into the DMA space - */ - for (CurrFrag = 0; CurrFrag < skb_shinfo(pMessage)->nr_frags; CurrFrag++) { - sk_frag = &skb_shinfo(pMessage)->frags[CurrFrag]; - /* - ** we already have the proper value in entry - */ - PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, - sk_frag->page, - sk_frag->page_offset, - sk_frag->size, - PCI_DMA_TODEVICE); - - pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); - pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); - pTxd->pMBuf = pMessage; - - pTxd->TBControl = Control | BMU_OWN | sk_frag->size; - - /* - ** Do we have the last fragment? - */ - if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) { -#ifdef USE_TX_COMPLETE - pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF; -#else - pTxd->TBControl |= BMU_EOF; -#endif - pTxdFst->TBControl |= BMU_OWN | BMU_SW; - } - pTxdLst = pTxd; - pTxd = pTxd->pNextTxd; - pTxPort->TxdRingFree--; - BytesSend += sk_frag->size; - } - - /* - ** If previous descriptor already done, give TX start cmd - */ - if ((pTxPort->pTxdRingPrev->TBControl & BMU_OWN) == 0) { - SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); - } - - pTxPort->pTxdRingPrev = pTxdLst; - pTxPort->pTxdRingHead = pTxd; - - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); - - if (pTxPort->TxdRingFree > 0) { - return (BytesSend); - } else { - return (0); - } -} - -/***************************************************************************** - * - * FreeTxDescriptors - release descriptors from the descriptor ring - * - * Description: - * This function releases descriptors from a transmit ring if they - * have been sent by the BMU. - * If a descriptors is sent, it can be freed and the message can - * be freed, too. - * The SOFTWARE controllable bit is used to prevent running around a - * completely free ring for ever. If this bit is no set in the - * frame (by XmitFrame), this frame has never been sent or is - * already freed. - * The Tx descriptor ring lock must be held while calling this function !!! - * - * Returns: - * none - */ -static void FreeTxDescriptors( -SK_AC *pAC, /* pointer to the adapter context */ -TX_PORT *pTxPort) /* pointer to destination port structure */ -{ -TXD *pTxd; /* pointer to the checked descriptor */ -TXD *pNewTail; /* pointer to 'end' of the ring */ -SK_U32 Control; /* TBControl field of descriptor */ -SK_U64 PhysAddr; /* address of DMA mapping */ - - pNewTail = pTxPort->pTxdRingTail; - pTxd = pNewTail; - /* - ** loop forever; exits if BMU_SW bit not set in start frame - ** or BMU_OWN bit set in any frame - */ - while (1) { - Control = pTxd->TBControl; - if ((Control & BMU_SW) == 0) { - /* - ** software controllable bit is set in first - ** fragment when given to BMU. Not set means that - ** this fragment was never sent or is already - ** freed ( -> ring completely free now). - */ - pTxPort->pTxdRingTail = pTxd; - netif_wake_queue(pAC->dev[pTxPort->PortIndex]); - return; - } - if (Control & BMU_OWN) { - pTxPort->pTxdRingTail = pTxd; - if (pTxPort->TxdRingFree > 0) { - netif_wake_queue(pAC->dev[pTxPort->PortIndex]); - } - return; - } - - /* - ** release the DMA mapping, because until not unmapped - ** this buffer is considered being under control of the - ** adapter card! - */ - PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32; - PhysAddr |= (SK_U64) pTxd->VDataLow; - pci_unmap_page(pAC->PciDev, PhysAddr, - pTxd->pMBuf->len, - PCI_DMA_TODEVICE); - - if (Control & BMU_EOF) - DEV_KFREE_SKB_ANY(pTxd->pMBuf); /* free message */ - - pTxPort->TxdRingFree++; - pTxd->TBControl &= ~BMU_SW; - pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */ - } /* while(forever) */ -} /* FreeTxDescriptors */ - -/***************************************************************************** - * - * FillRxRing - fill the receive ring with valid descriptors - * - * Description: - * This function fills the receive ring descriptors with data - * segments and makes them valid for the BMU. - * The active ring is filled completely, if possible. - * The non-active ring is filled only partial to save memory. - * - * Description of rx ring structure: - * head - points to the descriptor which will be used next by the BMU - * tail - points to the next descriptor to give to the BMU - * - * Returns: N/A - */ -static void FillRxRing( -SK_AC *pAC, /* pointer to the adapter context */ -RX_PORT *pRxPort) /* ptr to port struct for which the ring - should be filled */ -{ -unsigned long Flags; - - spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); - while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) { - if(!FillRxDescriptor(pAC, pRxPort)) - break; - } - spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); -} /* FillRxRing */ - - -/***************************************************************************** - * - * FillRxDescriptor - fill one buffer into the receive ring - * - * Description: - * The function allocates a new receive buffer and - * puts it into the next descriptor. - * - * Returns: - * SK_TRUE - a buffer was added to the ring - * SK_FALSE - a buffer could not be added - */ -static SK_BOOL FillRxDescriptor( -SK_AC *pAC, /* pointer to the adapter context struct */ -RX_PORT *pRxPort) /* ptr to port struct of ring to fill */ -{ -struct sk_buff *pMsgBlock; /* pointer to a new message block */ -RXD *pRxd; /* the rxd to fill */ -SK_U16 Length; /* data fragment length */ -SK_U64 PhysAddr; /* physical address of a rx buffer */ - - pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC); - if (pMsgBlock == NULL) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_ENTRY, - ("%s: Allocation of rx buffer failed !\n", - pAC->dev[pRxPort->PortIndex]->name)); - SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex); - return(SK_FALSE); - } - skb_reserve(pMsgBlock, 2); /* to align IP frames */ - /* skb allocated ok, so add buffer */ - pRxd = pRxPort->pRxdRingTail; - pRxPort->pRxdRingTail = pRxd->pNextRxd; - pRxPort->RxdRingFree--; - Length = pAC->RxBufSize; - PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, - virt_to_page(pMsgBlock->data), - ((unsigned long) pMsgBlock->data & - ~PAGE_MASK), - pAC->RxBufSize - 2, - PCI_DMA_FROMDEVICE); - - pRxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); - pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32); - pRxd->pMBuf = pMsgBlock; - pRxd->RBControl = BMU_OWN | - BMU_STF | - BMU_IRQ_EOF | - BMU_TCP_CHECK | - Length; - return (SK_TRUE); - -} /* FillRxDescriptor */ - - -/***************************************************************************** - * - * ReQueueRxBuffer - fill one buffer back into the receive ring - * - * Description: - * Fill a given buffer back into the rx ring. The buffer - * has been previously allocated and aligned, and its phys. - * address calculated, so this is no more necessary. - * - * Returns: N/A - */ -static void ReQueueRxBuffer( -SK_AC *pAC, /* pointer to the adapter context struct */ -RX_PORT *pRxPort, /* ptr to port struct of ring to fill */ -struct sk_buff *pMsg, /* pointer to the buffer */ -SK_U32 PhysHigh, /* phys address high dword */ -SK_U32 PhysLow) /* phys address low dword */ -{ -RXD *pRxd; /* the rxd to fill */ -SK_U16 Length; /* data fragment length */ - - pRxd = pRxPort->pRxdRingTail; - pRxPort->pRxdRingTail = pRxd->pNextRxd; - pRxPort->RxdRingFree--; - Length = pAC->RxBufSize; - - pRxd->VDataLow = PhysLow; - pRxd->VDataHigh = PhysHigh; - pRxd->pMBuf = pMsg; - pRxd->RBControl = BMU_OWN | - BMU_STF | - BMU_IRQ_EOF | - BMU_TCP_CHECK | - Length; - return; -} /* ReQueueRxBuffer */ - -/***************************************************************************** - * - * ReceiveIrq - handle a receive IRQ - * - * Description: - * This function is called when a receive IRQ is set. - * It walks the receive descriptor ring and sends up all - * frames that are complete. - * - * Returns: N/A - */ -static void ReceiveIrq( - SK_AC *pAC, /* pointer to adapter context */ - RX_PORT *pRxPort, /* pointer to receive port struct */ - SK_BOOL SlowPathLock) /* indicates if SlowPathLock is needed */ -{ -RXD *pRxd; /* pointer to receive descriptors */ -SK_U32 Control; /* control field of descriptor */ -struct sk_buff *pMsg; /* pointer to message holding frame */ -struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ -int FrameLength; /* total length of received frame */ -SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ -SK_EVPARA EvPara; /* an event parameter union */ -unsigned long Flags; /* for spin lock */ -int PortIndex = pRxPort->PortIndex; -unsigned int Offset; -unsigned int NumBytes; -unsigned int ForRlmt; -SK_BOOL IsBc; -SK_BOOL IsMc; -SK_BOOL IsBadFrame; /* Bad frame */ - -SK_U32 FrameStat; -SK_U64 PhysAddr; - -rx_start: - /* do forever; exit if BMU_OWN found */ - for ( pRxd = pRxPort->pRxdRingHead ; - pRxPort->RxdRingFree < pAC->RxDescrPerRing ; - pRxd = pRxd->pNextRxd, - pRxPort->pRxdRingHead = pRxd, - pRxPort->RxdRingFree ++) { - - /* - * For a better understanding of this loop - * Go through every descriptor beginning at the head - * Please note: the ring might be completely received so the OWN bit - * set is not a good crirteria to leave that loop. - * Therefore the RingFree counter is used. - * On entry of this loop pRxd is a pointer to the Rxd that needs - * to be checked next. - */ - - Control = pRxd->RBControl; - - /* check if this descriptor is ready */ - if ((Control & BMU_OWN) != 0) { - /* this descriptor is not yet ready */ - /* This is the usual end of the loop */ - /* We don't need to start the ring again */ - FillRxRing(pAC, pRxPort); - return; - } - pAC->DynIrqModInfo.NbrProcessedDescr++; - - /* get length of frame and check it */ - FrameLength = Control & BMU_BBC; - if (FrameLength > pAC->RxBufSize) { - goto rx_failed; - } - - /* check for STF and EOF */ - if ((Control & (BMU_STF | BMU_EOF)) != (BMU_STF | BMU_EOF)) { - goto rx_failed; - } - - /* here we have a complete frame in the ring */ - pMsg = pRxd->pMBuf; - - FrameStat = pRxd->FrameStat; - - /* check for frame length mismatch */ -#define XMR_FS_LEN_SHIFT 18 -#define GMR_FS_LEN_SHIFT 16 - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { - if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("skge: Frame length mismatch (%u/%u).\n", - FrameLength, - (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); - goto rx_failed; - } - } - else { - if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("skge: Frame length mismatch (%u/%u).\n", - FrameLength, - (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); - goto rx_failed; - } - } - - /* Set Rx Status */ - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { - IsBc = (FrameStat & XMR_FS_BC) != 0; - IsMc = (FrameStat & XMR_FS_MC) != 0; - IsBadFrame = (FrameStat & - (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0; - } else { - IsBc = (FrameStat & GMR_FS_BC) != 0; - IsMc = (FrameStat & GMR_FS_MC) != 0; - IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) || - ((FrameStat & GMR_FS_RX_OK) == 0)); - } - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, - ("Received frame of length %d on port %d\n", - FrameLength, PortIndex)); - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, - ("Number of free rx descriptors: %d\n", - pRxPort->RxdRingFree)); -/* DumpMsg(pMsg, "Rx"); */ - - if ((Control & BMU_STAT_VAL) != BMU_STAT_VAL || (IsBadFrame)) { -#if 0 - (FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) { -#endif - /* there is a receive error in this frame */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("skge: Error in received frame, dropped!\n" - "Control: %x\nRxStat: %x\n", - Control, FrameStat)); - - ReQueueRxBuffer(pAC, pRxPort, pMsg, - pRxd->VDataHigh, pRxd->VDataLow); - - continue; - } - - /* - * if short frame then copy data to reduce memory waste - */ - if ((FrameLength < SK_COPY_THRESHOLD) && - ((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) { - /* - * Short frame detected and allocation successfull - */ - /* use new skb and copy data */ - skb_reserve(pNewMsg, 2); - skb_put(pNewMsg, FrameLength); - PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; - PhysAddr |= (SK_U64) pRxd->VDataLow; - - pci_dma_sync_single_for_cpu(pAC->PciDev, - (dma_addr_t) PhysAddr, - FrameLength, - PCI_DMA_FROMDEVICE); - skb_copy_to_linear_data(pNewMsg, pMsg, FrameLength); - - pci_dma_sync_single_for_device(pAC->PciDev, - (dma_addr_t) PhysAddr, - FrameLength, - PCI_DMA_FROMDEVICE); - ReQueueRxBuffer(pAC, pRxPort, pMsg, - pRxd->VDataHigh, pRxd->VDataLow); - - pMsg = pNewMsg; - - } - else { - /* - * if large frame, or SKB allocation failed, pass - * the SKB directly to the networking - */ - - PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; - PhysAddr |= (SK_U64) pRxd->VDataLow; - - /* release the DMA mapping */ - pci_unmap_single(pAC->PciDev, - PhysAddr, - pAC->RxBufSize - 2, - PCI_DMA_FROMDEVICE); - - /* set length in message */ - skb_put(pMsg, FrameLength); - } /* frame > SK_COPY_TRESHOLD */ - -#ifdef USE_SK_RX_CHECKSUM - pMsg->csum = pRxd->TcpSums & 0xffff; - pMsg->ip_summed = CHECKSUM_COMPLETE; -#else - pMsg->ip_summed = CHECKSUM_NONE; -#endif - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); - ForRlmt = SK_RLMT_RX_PROTOCOL; -#if 0 - IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC; -#endif - SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength, - IsBc, &Offset, &NumBytes); - if (NumBytes != 0) { -#if 0 - IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC; -#endif - SK_RLMT_LOOKAHEAD(pAC, PortIndex, - &pMsg->data[Offset], - IsBc, IsMc, &ForRlmt); - } - if (ForRlmt == SK_RLMT_RX_PROTOCOL) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("W")); - /* send up only frames from active port */ - if ((PortIndex == pAC->ActivePort) || - (pAC->RlmtNets == 2)) { - /* frame for upper layer */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U")); -#ifdef xDEBUG - DumpMsg(pMsg, "Rx"); -#endif - SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC, - FrameLength, pRxPort->PortIndex); - - pMsg->protocol = eth_type_trans(pMsg, - pAC->dev[pRxPort->PortIndex]); - netif_rx(pMsg); - pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; - } - else { - /* drop frame */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("D")); - DEV_KFREE_SKB(pMsg); - } - - } /* if not for rlmt */ - else { - /* packet for rlmt */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, ("R")); - pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC, - pAC->IoBase, FrameLength); - if (pRlmtMbuf != NULL) { - pRlmtMbuf->pNext = NULL; - pRlmtMbuf->Length = FrameLength; - pRlmtMbuf->PortIdx = PortIndex; - EvPara.pParaPtr = pRlmtMbuf; - memcpy((char*)(pRlmtMbuf->pData), - (char*)(pMsg->data), - FrameLength); - - /* SlowPathLock needed? */ - if (SlowPathLock == SK_TRUE) { - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - SkEventQueue(pAC, SKGE_RLMT, - SK_RLMT_PACKET_RECEIVED, - EvPara); - pAC->CheckQueue = SK_TRUE; - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - } else { - SkEventQueue(pAC, SKGE_RLMT, - SK_RLMT_PACKET_RECEIVED, - EvPara); - pAC->CheckQueue = SK_TRUE; - } - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("Q")); - } - if ((pAC->dev[pRxPort->PortIndex]->flags & - (IFF_PROMISC | IFF_ALLMULTI)) != 0 || - (ForRlmt & SK_RLMT_RX_PROTOCOL) == - SK_RLMT_RX_PROTOCOL) { - pMsg->protocol = eth_type_trans(pMsg, - pAC->dev[pRxPort->PortIndex]); - netif_rx(pMsg); - pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; - } - else { - DEV_KFREE_SKB(pMsg); - } - - } /* if packet for rlmt */ - } /* for ... scanning the RXD ring */ - - /* RXD ring is empty -> fill and restart */ - FillRxRing(pAC, pRxPort); - /* do not start if called from Close */ - if (pAC->BoardLevel > SK_INIT_DATA) { - ClearAndStartRx(pAC, PortIndex); - } - return; - -rx_failed: - /* remove error frame */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR, - ("Schrottdescriptor, length: 0x%x\n", FrameLength)); - - /* release the DMA mapping */ - - PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; - PhysAddr |= (SK_U64) pRxd->VDataLow; - pci_unmap_page(pAC->PciDev, - PhysAddr, - pAC->RxBufSize - 2, - PCI_DMA_FROMDEVICE); - DEV_KFREE_SKB_IRQ(pRxd->pMBuf); - pRxd->pMBuf = NULL; - pRxPort->RxdRingFree++; - pRxPort->pRxdRingHead = pRxd->pNextRxd; - goto rx_start; - -} /* ReceiveIrq */ - - -/***************************************************************************** - * - * ClearAndStartRx - give a start receive command to BMU, clear IRQ - * - * Description: - * This function sends a start command and a clear interrupt - * command for one receive queue to the BMU. - * - * Returns: N/A - * none - */ -static void ClearAndStartRx( -SK_AC *pAC, /* pointer to the adapter context */ -int PortIndex) /* index of the receive port (XMAC) */ -{ - SK_OUT8(pAC->IoBase, - RxQueueAddr[PortIndex]+Q_CSR, - CSR_START | CSR_IRQ_CL_F); -} /* ClearAndStartRx */ - - -/***************************************************************************** - * - * ClearTxIrq - give a clear transmit IRQ command to BMU - * - * Description: - * This function sends a clear tx IRQ command for one - * transmit queue to the BMU. - * - * Returns: N/A - */ -static void ClearTxIrq( -SK_AC *pAC, /* pointer to the adapter context */ -int PortIndex, /* index of the transmit port (XMAC) */ -int Prio) /* priority or normal queue */ -{ - SK_OUT8(pAC->IoBase, - TxQueueAddr[PortIndex][Prio]+Q_CSR, - CSR_IRQ_CL_F); -} /* ClearTxIrq */ - - -/***************************************************************************** - * - * ClearRxRing - remove all buffers from the receive ring - * - * Description: - * This function removes all receive buffers from the ring. - * The receive BMU must be stopped before calling this function. - * - * Returns: N/A - */ -static void ClearRxRing( -SK_AC *pAC, /* pointer to adapter context */ -RX_PORT *pRxPort) /* pointer to rx port struct */ -{ -RXD *pRxd; /* pointer to the current descriptor */ -unsigned long Flags; -SK_U64 PhysAddr; - - if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) { - return; - } - spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); - pRxd = pRxPort->pRxdRingHead; - do { - if (pRxd->pMBuf != NULL) { - - PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; - PhysAddr |= (SK_U64) pRxd->VDataLow; - pci_unmap_page(pAC->PciDev, - PhysAddr, - pAC->RxBufSize - 2, - PCI_DMA_FROMDEVICE); - DEV_KFREE_SKB(pRxd->pMBuf); - pRxd->pMBuf = NULL; - } - pRxd->RBControl &= BMU_OWN; - pRxd = pRxd->pNextRxd; - pRxPort->RxdRingFree++; - } while (pRxd != pRxPort->pRxdRingTail); - pRxPort->pRxdRingTail = pRxPort->pRxdRingHead; - spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); -} /* ClearRxRing */ - -/***************************************************************************** - * - * ClearTxRing - remove all buffers from the transmit ring - * - * Description: - * This function removes all transmit buffers from the ring. - * The transmit BMU must be stopped before calling this function - * and transmitting at the upper level must be disabled. - * The BMU own bit of all descriptors is cleared, the rest is - * done by calling FreeTxDescriptors. - * - * Returns: N/A - */ -static void ClearTxRing( -SK_AC *pAC, /* pointer to adapter context */ -TX_PORT *pTxPort) /* pointer to tx prt struct */ -{ -TXD *pTxd; /* pointer to the current descriptor */ -int i; -unsigned long Flags; - - spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); - pTxd = pTxPort->pTxdRingHead; - for (i=0; iTxDescrPerRing; i++) { - pTxd->TBControl &= ~BMU_OWN; - pTxd = pTxd->pNextTxd; - } - FreeTxDescriptors(pAC, pTxPort); - spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); -} /* ClearTxRing */ - -/***************************************************************************** - * - * SkGeSetMacAddr - Set the hardware MAC address - * - * Description: - * This function sets the MAC address used by the adapter. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p) -{ - -DEV_NET *pNet = netdev_priv(dev); -SK_AC *pAC = pNet->pAC; - -struct sockaddr *addr = p; -unsigned long Flags; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeSetMacAddr starts now...\n")); - if(netif_running(dev)) - return -EBUSY; - - memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - - if (pAC->RlmtNets == 2) - SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr, - (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); - else - SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort, - (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); - - - - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - return 0; -} /* SkGeSetMacAddr */ - - -/***************************************************************************** - * - * SkGeSetRxMode - set receive mode - * - * Description: - * This function sets the receive mode of an adapter. The adapter - * supports promiscuous mode, allmulticast mode and a number of - * multicast addresses. If more multicast addresses the available - * are selected, a hash function in the hardware is used. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static void SkGeSetRxMode(struct SK_NET_DEVICE *dev) -{ - -DEV_NET *pNet; -SK_AC *pAC; - -struct dev_mc_list *pMcList; -int i; -int PortIdx; -unsigned long Flags; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeSetRxMode starts now... ")); - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - if (pAC->RlmtNets == 1) - PortIdx = pAC->ActivePort; - else - PortIdx = pNet->NetNr; - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - if (dev->flags & IFF_PROMISC) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("PROMISCUOUS mode\n")); - SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, - SK_PROM_MODE_LLC); - } else if (dev->flags & IFF_ALLMULTI) { - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("ALLMULTI mode\n")); - SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, - SK_PROM_MODE_ALL_MC); - } else { - SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, - SK_PROM_MODE_NONE); - SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("Number of MC entries: %d ", dev->mc_count)); - - pMcList = dev->mc_list; - for (i=0; imc_count; i++, pMcList = pMcList->next) { - SkAddrMcAdd(pAC, pAC->IoBase, PortIdx, - (SK_MAC_ADDR*)pMcList->dmi_addr, 0); - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA, - ("%02x:%02x:%02x:%02x:%02x:%02x\n", - pMcList->dmi_addr[0], - pMcList->dmi_addr[1], - pMcList->dmi_addr[2], - pMcList->dmi_addr[3], - pMcList->dmi_addr[4], - pMcList->dmi_addr[5])); - } - SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx); - } - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - return; -} /* SkGeSetRxMode */ - - -/***************************************************************************** - * - * SkGeChangeMtu - set the MTU to another value - * - * Description: - * This function sets is called whenever the MTU size is changed - * (ifconfig mtu xxx dev ethX). If the MTU is bigger than standard - * ethernet MTU size, long frame support is activated. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu) -{ -DEV_NET *pNet; -struct net_device *pOtherDev; -SK_AC *pAC; -unsigned long Flags; -int i; -SK_EVPARA EvPara; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeChangeMtu starts now...\n")); - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) { - return -EINVAL; - } - - if(pAC->BoardLevel != SK_INIT_RUN) { - return -EINVAL; - } - -#ifdef SK_DIAG_SUPPORT - if (pAC->DiagModeActive == DIAG_ACTIVE) { - if (pAC->DiagFlowCtrl == SK_FALSE) { - return -1; /* still in use, deny any actions of MTU */ - } else { - pAC->DiagFlowCtrl = SK_FALSE; - } - } -#endif - - pOtherDev = pAC->dev[1 - pNet->NetNr]; - - if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500) - && (NewMtu <= 1500)) - return 0; - - pAC->RxBufSize = NewMtu + 32; - dev->mtu = NewMtu; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("New MTU: %d\n", NewMtu)); - - /* - ** Prevent any reconfiguration while changing the MTU - ** by disabling any interrupts - */ - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - - /* - ** Notify RLMT that any ports are to be stopped - */ - EvPara.Para32[0] = 0; - EvPara.Para32[1] = -1; - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - EvPara.Para32[0] = 1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - } else { - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - } - - /* - ** After calling the SkEventDispatcher(), RLMT is aware about - ** the stopped ports -> configuration can take place! - */ - SkEventDispatcher(pAC, pAC->IoBase); - - for (i=0; iGIni.GIMacsFound; i++) { - spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); - netif_stop_queue(pAC->dev[i]); - - } - - /* - ** Depending on the desired MTU size change, a different number of - ** RX buffers need to be allocated - */ - if (NewMtu > 1500) { - /* - ** Use less rx buffers - */ - for (i=0; iGIni.GIMacsFound; i++) { - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - - (pAC->RxDescrPerRing / 4); - } else { - if (i == pAC->ActivePort) { - pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - - (pAC->RxDescrPerRing / 4); - } else { - pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - - (pAC->RxDescrPerRing / 10); - } - } - } - } else { - /* - ** Use the normal amount of rx buffers - */ - for (i=0; iGIni.GIMacsFound; i++) { - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - pAC->RxPort[i].RxFillLimit = 1; - } else { - if (i == pAC->ActivePort) { - pAC->RxPort[i].RxFillLimit = 1; - } else { - pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - - (pAC->RxDescrPerRing / 4); - } - } - } - } - - SkGeDeInit(pAC, pAC->IoBase); - - /* - ** enable/disable hardware support for long frames - */ - if (NewMtu > 1500) { -// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */ - pAC->GIni.GIPortUsage = SK_JUMBO_LINK; - } else { - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - pAC->GIni.GIPortUsage = SK_MUL_LINK; - } else { - pAC->GIni.GIPortUsage = SK_RED_LINK; - } - } - - SkGeInit( pAC, pAC->IoBase, SK_INIT_IO); - SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); - SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); - SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); - SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); - SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); - SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); - - /* - ** tschilling: - ** Speed and others are set back to default in level 1 init! - */ - GetConfiguration(pAC); - - SkGeInit( pAC, pAC->IoBase, SK_INIT_RUN); - SkI2cInit( pAC, pAC->IoBase, SK_INIT_RUN); - SkEventInit(pAC, pAC->IoBase, SK_INIT_RUN); - SkPnmiInit( pAC, pAC->IoBase, SK_INIT_RUN); - SkAddrInit( pAC, pAC->IoBase, SK_INIT_RUN); - SkRlmtInit( pAC, pAC->IoBase, SK_INIT_RUN); - SkTimerInit(pAC, pAC->IoBase, SK_INIT_RUN); - - /* - ** clear and reinit the rx rings here - */ - for (i=0; iGIni.GIMacsFound; i++) { - ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); - ClearRxRing(pAC, &pAC->RxPort[i]); - FillRxRing(pAC, &pAC->RxPort[i]); - - /* - ** Enable transmit descriptor polling - */ - SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); - FillRxRing(pAC, &pAC->RxPort[i]); - }; - - SkGeYellowLED(pAC, pAC->IoBase, 1); - SkDimEnableModerationIfNeeded(pAC); - SkDimDisplayModerationSettings(pAC); - - netif_start_queue(pAC->dev[pNet->PortNr]); - for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) { - spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); - } - - /* - ** Enable Interrupts again - */ - SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); - SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); - - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - - /* - ** Notify RLMT about the changing and restarting one (or more) ports - */ - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - EvPara.Para32[0] = pAC->RlmtNets; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara); - EvPara.Para32[0] = pNet->PortNr; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - - if (netif_running(pOtherDev)) { - DEV_NET *pOtherNet = netdev_priv(pOtherDev); - EvPara.Para32[0] = pOtherNet->PortNr; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - } - } else { - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - } - - SkEventDispatcher(pAC, pAC->IoBase); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - /* - ** While testing this driver with latest kernel 2.5 (2.5.70), it - ** seems as if upper layers have a problem to handle a successful - ** return value of '0'. If such a zero is returned, the complete - ** system hangs for several minutes (!), which is in acceptable. - ** - ** Currently it is not clear, what the exact reason for this problem - ** is. The implemented workaround for 2.5 is to return the desired - ** new MTU size if all needed changes for the new MTU size where - ** performed. In kernels 2.2 and 2.4, a zero value is returned, - ** which indicates the successful change of the mtu-size. - */ - return NewMtu; - -} /* SkGeChangeMtu */ - - -/***************************************************************************** - * - * SkGeStats - return ethernet device statistics - * - * Description: - * This function return statistic data about the ethernet device - * to the operating system. - * - * Returns: - * pointer to the statistic structure. - */ -static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev) -{ -DEV_NET *pNet = netdev_priv(dev); -SK_AC *pAC = pNet->pAC; -SK_PNMI_STRUCT_DATA *pPnmiStruct; /* structure for all Pnmi-Data */ -SK_PNMI_STAT *pPnmiStat; /* pointer to virtual XMAC stat. data */ -SK_PNMI_CONF *pPnmiConf; /* pointer to virtual link config. */ -unsigned int Size; /* size of pnmi struct */ -unsigned long Flags; /* for spin lock */ - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeStats starts now...\n")); - pPnmiStruct = &pAC->PnmiStruct; - -#ifdef SK_DIAG_SUPPORT - if ((pAC->DiagModeActive == DIAG_NOTACTIVE) && - (pAC->BoardLevel == SK_INIT_RUN)) { -#endif - SK_MEMSET(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA)); - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - Size = SK_PNMI_STRUCT_SIZE; - SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); -#ifdef SK_DIAG_SUPPORT - } -#endif - - pPnmiStat = &pPnmiStruct->Stat[0]; - pPnmiConf = &pPnmiStruct->Conf[0]; - - pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF; - pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF; - pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; - pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; - - if (dev->mtu <= 1500) { - pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; - } else { - pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF); - } - - - if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12) - pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts; - - pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; - pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF; - pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF; - pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF; - pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; - - /* detailed rx_errors: */ - pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF; - pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; - pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF; - pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF; - pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; - pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF; - - /* detailed tx_errors */ - pAC->stats.tx_aborted_errors = (SK_U32) 0; - pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; - pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF; - pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; - pAC->stats.tx_window_errors = (SK_U32) 0; - - return(&pAC->stats); -} /* SkGeStats */ - -/* - * Basic MII register access - */ -static int SkGeMiiIoctl(struct net_device *dev, - struct mii_ioctl_data *data, int cmd) -{ - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - SK_IOC IoC = pAC->IoBase; - int Port = pNet->PortNr; - SK_GEPORT *pPrt = &pAC->GIni.GP[Port]; - unsigned long Flags; - int err = 0; - int reg = data->reg_num & 0x1f; - SK_U16 val = data->val_in; - - if (!netif_running(dev)) - return -ENODEV; /* Phy still in reset */ - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - switch(cmd) { - case SIOCGMIIPHY: - data->phy_id = pPrt->PhyAddr; - - /* fallthru */ - case SIOCGMIIREG: - if (pAC->GIni.GIGenesis) - SkXmPhyRead(pAC, IoC, Port, reg, &val); - else - SkGmPhyRead(pAC, IoC, Port, reg, &val); - - data->val_out = val; - break; - - case SIOCSMIIREG: - if (!capable(CAP_NET_ADMIN)) - err = -EPERM; - - else if (pAC->GIni.GIGenesis) - SkXmPhyWrite(pAC, IoC, Port, reg, val); - else - SkGmPhyWrite(pAC, IoC, Port, reg, val); - break; - default: - err = -EOPNOTSUPP; - } - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - return err; -} - - -/***************************************************************************** - * - * SkGeIoctl - IO-control function - * - * Description: - * This function is called if an ioctl is issued on the device. - * There are three subfunction for reading, writing and test-writing - * the private MIB data structure (useful for SysKonnect-internal tools). - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd) -{ -DEV_NET *pNet; -SK_AC *pAC; -void *pMemBuf; -struct pci_dev *pdev = NULL; -SK_GE_IOCTL Ioctl; -unsigned int Err = 0; -int Size = 0; -int Ret = 0; -unsigned int Length = 0; -int HeaderLength = sizeof(SK_U32) + sizeof(SK_U32); - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeIoctl starts now...\n")); - - pNet = netdev_priv(dev); - pAC = pNet->pAC; - - if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG) - return SkGeMiiIoctl(dev, if_mii(rq), cmd); - - if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) { - return -EFAULT; - } - - switch(cmd) { - case SK_IOCTL_SETMIB: - case SK_IOCTL_PRESETMIB: - if (!capable(CAP_NET_ADMIN)) return -EPERM; - case SK_IOCTL_GETMIB: - if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData, - Ioctl.LenPnmiStruct)? - Ioctl.Len : sizeof(pAC->PnmiStruct))) { - return -EFAULT; - } - Size = SkGeIocMib(pNet, Ioctl.Len, cmd); - if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct, - Ioctl.Lenifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { - return -EFAULT; - } - break; - case SK_IOCTL_GEN: - if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { - Length = Ioctl.Len; - } else { - Length = sizeof(pAC->PnmiStruct) + HeaderLength; - } - if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { - return -ENOMEM; - } - if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { - Err = -EFAULT; - goto fault_gen; - } - if ((Ret = SkPnmiGenIoctl(pAC, pAC->IoBase, pMemBuf, &Length, 0)) < 0) { - Err = -EFAULT; - goto fault_gen; - } - if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { - Err = -EFAULT; - goto fault_gen; - } - Ioctl.Len = Length; - if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { - Err = -EFAULT; - goto fault_gen; - } -fault_gen: - kfree(pMemBuf); /* cleanup everything */ - break; -#ifdef SK_DIAG_SUPPORT - case SK_IOCTL_DIAG: - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { - Length = Ioctl.Len; - } else { - Length = sizeof(pAC->PnmiStruct) + HeaderLength; - } - if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { - return -ENOMEM; - } - if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { - Err = -EFAULT; - goto fault_diag; - } - pdev = pAC->PciDev; - Length = 3 * sizeof(SK_U32); /* Error, Bus and Device */ - /* - ** While coding this new IOCTL interface, only a few lines of code - ** are to to be added. Therefore no dedicated function has been - ** added. If more functionality is added, a separate function - ** should be used... - */ - * ((SK_U32 *)pMemBuf) = 0; - * ((SK_U32 *)pMemBuf + 1) = pdev->bus->number; - * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev)); - if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { - Err = -EFAULT; - goto fault_diag; - } - Ioctl.Len = Length; - if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { - Err = -EFAULT; - goto fault_diag; - } -fault_diag: - kfree(pMemBuf); /* cleanup everything */ - break; -#endif - default: - Err = -EOPNOTSUPP; - } - - return(Err); - -} /* SkGeIoctl */ - - -/***************************************************************************** - * - * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message - * - * Description: - * This function reads/writes the MIB data using PNMI (Private Network - * Management Interface). - * The destination for the data must be provided with the - * ioctl call and is given to the driver in the form of - * a user space address. - * Copying from the user-provided data area into kernel messages - * and back is done by copy_from_user and copy_to_user calls in - * SkGeIoctl. - * - * Returns: - * returned size from PNMI call - */ -static int SkGeIocMib( -DEV_NET *pNet, /* pointer to the adapter context */ -unsigned int Size, /* length of ioctl data */ -int mode) /* flag for set/preset */ -{ -unsigned long Flags; /* for spin lock */ -SK_AC *pAC; - - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("SkGeIocMib starts now...\n")); - pAC = pNet->pAC; - /* access MIB */ - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - switch(mode) { - case SK_IOCTL_GETMIB: - SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, - pNet->NetNr); - break; - case SK_IOCTL_PRESETMIB: - SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, - pNet->NetNr); - break; - case SK_IOCTL_SETMIB: - SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, - pNet->NetNr); - break; - default: - break; - } - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, - ("MIB data access succeeded\n")); - return (Size); -} /* SkGeIocMib */ - - -/***************************************************************************** - * - * GetConfiguration - read configuration information - * - * Description: - * This function reads per-adapter configuration information from - * the options provided on the command line. - * - * Returns: - * none - */ -static void GetConfiguration( -SK_AC *pAC) /* pointer to the adapter context structure */ -{ -SK_I32 Port; /* preferred port */ -SK_BOOL AutoSet; -SK_BOOL DupSet; -int LinkSpeed = SK_LSPEED_AUTO; /* Link speed */ -int AutoNeg = 1; /* autoneg off (0) or on (1) */ -int DuplexCap = 0; /* 0=both,1=full,2=half */ -int FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; /* FlowControl */ -int MSMode = SK_MS_MODE_AUTO; /* master/slave mode */ - -SK_BOOL IsConTypeDefined = SK_TRUE; -SK_BOOL IsLinkSpeedDefined = SK_TRUE; -SK_BOOL IsFlowCtrlDefined = SK_TRUE; -SK_BOOL IsRoleDefined = SK_TRUE; -SK_BOOL IsModeDefined = SK_TRUE; -/* - * The two parameters AutoNeg. and DuplexCap. map to one configuration - * parameter. The mapping is described by this table: - * DuplexCap -> | both | full | half | - * AutoNeg | | | | - * ----------------------------------------------------------------- - * Off | illegal | Full | Half | - * ----------------------------------------------------------------- - * On | AutoBoth | AutoFull | AutoHalf | - * ----------------------------------------------------------------- - * Sense | AutoSense | AutoSense | AutoSense | - */ -int Capabilities[3][3] = - { { -1, SK_LMODE_FULL , SK_LMODE_HALF }, - {SK_LMODE_AUTOBOTH , SK_LMODE_AUTOFULL , SK_LMODE_AUTOHALF }, - {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} }; - -#define DC_BOTH 0 -#define DC_FULL 1 -#define DC_HALF 2 -#define AN_OFF 0 -#define AN_ON 1 -#define AN_SENS 2 -#define M_CurrPort pAC->GIni.GP[Port] - - - /* - ** Set the default values first for both ports! - */ - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; - } - - /* - ** Check merged parameter ConType. If it has not been used, - ** verify any other parameter (e.g. AutoNeg) and use default values. - ** - ** Stating both ConType and other lowlevel link parameters is also - ** possible. If this is the case, the passed ConType-parameter is - ** overwritten by the lowlevel link parameter. - ** - ** The following settings are used for a merged ConType-parameter: - ** - ** ConType DupCap AutoNeg FlowCtrl Role Speed - ** ------- ------ ------- -------- ---------- ----- - ** Auto Both On SymOrRem Auto Auto - ** 100FD Full Off None 100 - ** 100HD Half Off None 100 - ** 10FD Full Off None 10 - ** 10HD Half Off None 10 - ** - ** This ConType parameter is used for all ports of the adapter! - */ - if ( (ConType != NULL) && - (pAC->Index < SK_MAX_CARD_PARAM) && - (ConType[pAC->Index] != NULL) ) { - - /* Check chipset family */ - if ((!pAC->ChipsetType) && - (strcmp(ConType[pAC->Index],"Auto")!=0) && - (strcmp(ConType[pAC->Index],"")!=0)) { - /* Set the speed parameter back */ - printk("sk98lin: Illegal value \"%s\" " - "for ConType." - " Using Auto.\n", - ConType[pAC->Index]); - - sprintf(ConType[pAC->Index], "Auto"); - } - - if (strcmp(ConType[pAC->Index],"")==0) { - IsConTypeDefined = SK_FALSE; /* No ConType defined */ - } else if (strcmp(ConType[pAC->Index],"Auto")==0) { - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; - } - } else if (strcmp(ConType[pAC->Index],"100FD")==0) { - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; - } - } else if (strcmp(ConType[pAC->Index],"100HD")==0) { - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; - } - } else if (strcmp(ConType[pAC->Index],"10FD")==0) { - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; - } - } else if (strcmp(ConType[pAC->Index],"10HD")==0) { - for (Port = 0; Port < SK_MAX_MACS; Port++) { - M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; - M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; - M_CurrPort.PMSMode = SK_MS_MODE_AUTO; - M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; - } - } else { - printk("sk98lin: Illegal value \"%s\" for ConType\n", - ConType[pAC->Index]); - IsConTypeDefined = SK_FALSE; /* Wrong ConType defined */ - } - } else { - IsConTypeDefined = SK_FALSE; /* No ConType defined */ - } - - /* - ** Parse any parameter settings for port A: - ** a) any LinkSpeed stated? - */ - if (Speed_A != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(Speed_A[pAC->Index],"")==0) { - IsLinkSpeedDefined = SK_FALSE; - } else if (strcmp(Speed_A[pAC->Index],"Auto")==0) { - LinkSpeed = SK_LSPEED_AUTO; - } else if (strcmp(Speed_A[pAC->Index],"10")==0) { - LinkSpeed = SK_LSPEED_10MBPS; - } else if (strcmp(Speed_A[pAC->Index],"100")==0) { - LinkSpeed = SK_LSPEED_100MBPS; - } else if (strcmp(Speed_A[pAC->Index],"1000")==0) { - LinkSpeed = SK_LSPEED_1000MBPS; - } else { - printk("sk98lin: Illegal value \"%s\" for Speed_A\n", - Speed_A[pAC->Index]); - IsLinkSpeedDefined = SK_FALSE; - } - } else { - IsLinkSpeedDefined = SK_FALSE; - } - - /* - ** Check speed parameter: - ** Only copper type adapter and GE V2 cards - */ - if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && - ((LinkSpeed != SK_LSPEED_AUTO) && - (LinkSpeed != SK_LSPEED_1000MBPS))) { - printk("sk98lin: Illegal value for Speed_A. " - "Not a copper card or GE V2 card\n Using " - "speed 1000\n"); - LinkSpeed = SK_LSPEED_1000MBPS; - } - - /* - ** Decide whether to set new config value if somethig valid has - ** been received. - */ - if (IsLinkSpeedDefined) { - pAC->GIni.GP[0].PLinkSpeed = LinkSpeed; - } - - /* - ** b) Any Autonegotiation and DuplexCapabilities set? - ** Please note that both belong together... - */ - AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */ - AutoSet = SK_FALSE; - if (AutoNeg_A != NULL && pAC->IndexIndex] != NULL) { - AutoSet = SK_TRUE; - if (strcmp(AutoNeg_A[pAC->Index],"")==0) { - AutoSet = SK_FALSE; - } else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) { - AutoNeg = AN_ON; - } else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) { - AutoNeg = AN_OFF; - } else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) { - AutoNeg = AN_SENS; - } else { - printk("sk98lin: Illegal value \"%s\" for AutoNeg_A\n", - AutoNeg_A[pAC->Index]); - } - } - - DuplexCap = DC_BOTH; - DupSet = SK_FALSE; - if (DupCap_A != NULL && pAC->IndexIndex] != NULL) { - DupSet = SK_TRUE; - if (strcmp(DupCap_A[pAC->Index],"")==0) { - DupSet = SK_FALSE; - } else if (strcmp(DupCap_A[pAC->Index],"Both")==0) { - DuplexCap = DC_BOTH; - } else if (strcmp(DupCap_A[pAC->Index],"Full")==0) { - DuplexCap = DC_FULL; - } else if (strcmp(DupCap_A[pAC->Index],"Half")==0) { - DuplexCap = DC_HALF; - } else { - printk("sk98lin: Illegal value \"%s\" for DupCap_A\n", - DupCap_A[pAC->Index]); - } - } - - /* - ** Check for illegal combinations - */ - if ((LinkSpeed == SK_LSPEED_1000MBPS) && - ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || - (DuplexCap == SK_LMODE_STAT_HALF)) && - (pAC->ChipsetType)) { - printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" - " Using Full Duplex.\n"); - DuplexCap = DC_FULL; - } - - if ( AutoSet && AutoNeg==AN_SENS && DupSet) { - printk("sk98lin, Port A: DuplexCapabilities" - " ignored using Sense mode\n"); - } - - if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ - printk("sk98lin: Port A: Illegal combination" - " of values AutoNeg. and DuplexCap.\n Using " - "Full Duplex\n"); - DuplexCap = DC_FULL; - } - - if (AutoSet && AutoNeg==AN_OFF && !DupSet) { - DuplexCap = DC_FULL; - } - - if (!AutoSet && DupSet) { - printk("sk98lin: Port A: Duplex setting not" - " possible in\n default AutoNegotiation mode" - " (Sense).\n Using AutoNegotiation On\n"); - AutoNeg = AN_ON; - } - - /* - ** set the desired mode - */ - if (AutoSet || DupSet) { - pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; - } - - /* - ** c) Any Flowcontrol-parameter set? - */ - if (FlowCtrl_A != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) { - IsFlowCtrlDefined = SK_FALSE; - } else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) { - FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; - } else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) { - FlowCtrl = SK_FLOW_MODE_SYMMETRIC; - } else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) { - FlowCtrl = SK_FLOW_MODE_LOC_SEND; - } else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) { - FlowCtrl = SK_FLOW_MODE_NONE; - } else { - printk("sk98lin: Illegal value \"%s\" for FlowCtrl_A\n", - FlowCtrl_A[pAC->Index]); - IsFlowCtrlDefined = SK_FALSE; - } - } else { - IsFlowCtrlDefined = SK_FALSE; - } - - if (IsFlowCtrlDefined) { - if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { - printk("sk98lin: Port A: FlowControl" - " impossible without AutoNegotiation," - " disabled\n"); - FlowCtrl = SK_FLOW_MODE_NONE; - } - pAC->GIni.GP[0].PFlowCtrlMode = FlowCtrl; - } - - /* - ** d) What is with the RoleParameter? - */ - if (Role_A != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(Role_A[pAC->Index],"")==0) { - IsRoleDefined = SK_FALSE; - } else if (strcmp(Role_A[pAC->Index],"Auto")==0) { - MSMode = SK_MS_MODE_AUTO; - } else if (strcmp(Role_A[pAC->Index],"Master")==0) { - MSMode = SK_MS_MODE_MASTER; - } else if (strcmp(Role_A[pAC->Index],"Slave")==0) { - MSMode = SK_MS_MODE_SLAVE; - } else { - printk("sk98lin: Illegal value \"%s\" for Role_A\n", - Role_A[pAC->Index]); - IsRoleDefined = SK_FALSE; - } - } else { - IsRoleDefined = SK_FALSE; - } - - if (IsRoleDefined == SK_TRUE) { - pAC->GIni.GP[0].PMSMode = MSMode; - } - - - - /* - ** Parse any parameter settings for port B: - ** a) any LinkSpeed stated? - */ - IsConTypeDefined = SK_TRUE; - IsLinkSpeedDefined = SK_TRUE; - IsFlowCtrlDefined = SK_TRUE; - IsModeDefined = SK_TRUE; - - if (Speed_B != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(Speed_B[pAC->Index],"")==0) { - IsLinkSpeedDefined = SK_FALSE; - } else if (strcmp(Speed_B[pAC->Index],"Auto")==0) { - LinkSpeed = SK_LSPEED_AUTO; - } else if (strcmp(Speed_B[pAC->Index],"10")==0) { - LinkSpeed = SK_LSPEED_10MBPS; - } else if (strcmp(Speed_B[pAC->Index],"100")==0) { - LinkSpeed = SK_LSPEED_100MBPS; - } else if (strcmp(Speed_B[pAC->Index],"1000")==0) { - LinkSpeed = SK_LSPEED_1000MBPS; - } else { - printk("sk98lin: Illegal value \"%s\" for Speed_B\n", - Speed_B[pAC->Index]); - IsLinkSpeedDefined = SK_FALSE; - } - } else { - IsLinkSpeedDefined = SK_FALSE; - } - - /* - ** Check speed parameter: - ** Only copper type adapter and GE V2 cards - */ - if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && - ((LinkSpeed != SK_LSPEED_AUTO) && - (LinkSpeed != SK_LSPEED_1000MBPS))) { - printk("sk98lin: Illegal value for Speed_B. " - "Not a copper card or GE V2 card\n Using " - "speed 1000\n"); - LinkSpeed = SK_LSPEED_1000MBPS; - } - - /* - ** Decide whether to set new config value if somethig valid has - ** been received. - */ - if (IsLinkSpeedDefined) { - pAC->GIni.GP[1].PLinkSpeed = LinkSpeed; - } - - /* - ** b) Any Autonegotiation and DuplexCapabilities set? - ** Please note that both belong together... - */ - AutoNeg = AN_SENS; /* default: do auto Sense */ - AutoSet = SK_FALSE; - if (AutoNeg_B != NULL && pAC->IndexIndex] != NULL) { - AutoSet = SK_TRUE; - if (strcmp(AutoNeg_B[pAC->Index],"")==0) { - AutoSet = SK_FALSE; - } else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) { - AutoNeg = AN_ON; - } else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) { - AutoNeg = AN_OFF; - } else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) { - AutoNeg = AN_SENS; - } else { - printk("sk98lin: Illegal value \"%s\" for AutoNeg_B\n", - AutoNeg_B[pAC->Index]); - } - } - - DuplexCap = DC_BOTH; - DupSet = SK_FALSE; - if (DupCap_B != NULL && pAC->IndexIndex] != NULL) { - DupSet = SK_TRUE; - if (strcmp(DupCap_B[pAC->Index],"")==0) { - DupSet = SK_FALSE; - } else if (strcmp(DupCap_B[pAC->Index],"Both")==0) { - DuplexCap = DC_BOTH; - } else if (strcmp(DupCap_B[pAC->Index],"Full")==0) { - DuplexCap = DC_FULL; - } else if (strcmp(DupCap_B[pAC->Index],"Half")==0) { - DuplexCap = DC_HALF; - } else { - printk("sk98lin: Illegal value \"%s\" for DupCap_B\n", - DupCap_B[pAC->Index]); - } - } - - - /* - ** Check for illegal combinations - */ - if ((LinkSpeed == SK_LSPEED_1000MBPS) && - ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || - (DuplexCap == SK_LMODE_STAT_HALF)) && - (pAC->ChipsetType)) { - printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" - " Using Full Duplex.\n"); - DuplexCap = DC_FULL; - } - - if (AutoSet && AutoNeg==AN_SENS && DupSet) { - printk("sk98lin, Port B: DuplexCapabilities" - " ignored using Sense mode\n"); - } - - if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ - printk("sk98lin: Port B: Illegal combination" - " of values AutoNeg. and DuplexCap.\n Using " - "Full Duplex\n"); - DuplexCap = DC_FULL; - } - - if (AutoSet && AutoNeg==AN_OFF && !DupSet) { - DuplexCap = DC_FULL; - } - - if (!AutoSet && DupSet) { - printk("sk98lin: Port B: Duplex setting not" - " possible in\n default AutoNegotiation mode" - " (Sense).\n Using AutoNegotiation On\n"); - AutoNeg = AN_ON; - } - - /* - ** set the desired mode - */ - if (AutoSet || DupSet) { - pAC->GIni.GP[1].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; - } - - /* - ** c) Any FlowCtrl parameter set? - */ - if (FlowCtrl_B != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) { - IsFlowCtrlDefined = SK_FALSE; - } else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) { - FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; - } else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) { - FlowCtrl = SK_FLOW_MODE_SYMMETRIC; - } else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) { - FlowCtrl = SK_FLOW_MODE_LOC_SEND; - } else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) { - FlowCtrl = SK_FLOW_MODE_NONE; - } else { - printk("sk98lin: Illegal value \"%s\" for FlowCtrl_B\n", - FlowCtrl_B[pAC->Index]); - IsFlowCtrlDefined = SK_FALSE; - } - } else { - IsFlowCtrlDefined = SK_FALSE; - } - - if (IsFlowCtrlDefined) { - if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { - printk("sk98lin: Port B: FlowControl" - " impossible without AutoNegotiation," - " disabled\n"); - FlowCtrl = SK_FLOW_MODE_NONE; - } - pAC->GIni.GP[1].PFlowCtrlMode = FlowCtrl; - } - - /* - ** d) What is the RoleParameter? - */ - if (Role_B != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(Role_B[pAC->Index],"")==0) { - IsRoleDefined = SK_FALSE; - } else if (strcmp(Role_B[pAC->Index],"Auto")==0) { - MSMode = SK_MS_MODE_AUTO; - } else if (strcmp(Role_B[pAC->Index],"Master")==0) { - MSMode = SK_MS_MODE_MASTER; - } else if (strcmp(Role_B[pAC->Index],"Slave")==0) { - MSMode = SK_MS_MODE_SLAVE; - } else { - printk("sk98lin: Illegal value \"%s\" for Role_B\n", - Role_B[pAC->Index]); - IsRoleDefined = SK_FALSE; - } - } else { - IsRoleDefined = SK_FALSE; - } - - if (IsRoleDefined) { - pAC->GIni.GP[1].PMSMode = MSMode; - } - - /* - ** Evaluate settings for both ports - */ - pAC->ActivePort = 0; - if (PrefPort != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */ - pAC->ActivePort = 0; - pAC->Rlmt.Net[0].Preference = -1; /* auto */ - pAC->Rlmt.Net[0].PrefPort = 0; - } else if (strcmp(PrefPort[pAC->Index],"A") == 0) { - /* - ** do not set ActivePort here, thus a port - ** switch is issued after net up. - */ - Port = 0; - pAC->Rlmt.Net[0].Preference = Port; - pAC->Rlmt.Net[0].PrefPort = Port; - } else if (strcmp(PrefPort[pAC->Index],"B") == 0) { - /* - ** do not set ActivePort here, thus a port - ** switch is issued after net up. - */ - if (pAC->GIni.GIMacsFound == 1) { - printk("sk98lin: Illegal value \"B\" for PrefPort.\n" - " Port B not available on single port adapters.\n"); - - pAC->ActivePort = 0; - pAC->Rlmt.Net[0].Preference = -1; /* auto */ - pAC->Rlmt.Net[0].PrefPort = 0; - } else { - Port = 1; - pAC->Rlmt.Net[0].Preference = Port; - pAC->Rlmt.Net[0].PrefPort = Port; - } - } else { - printk("sk98lin: Illegal value \"%s\" for PrefPort\n", - PrefPort[pAC->Index]); - } - } - - pAC->RlmtNets = 1; - - if (RlmtMode != NULL && pAC->IndexIndex] != NULL) { - if (strcmp(RlmtMode[pAC->Index], "") == 0) { - pAC->RlmtMode = 0; - } else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) { - pAC->RlmtMode = SK_RLMT_CHECK_LINK; - } else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) { - pAC->RlmtMode = SK_RLMT_CHECK_LINK | - SK_RLMT_CHECK_LOC_LINK; - } else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) { - pAC->RlmtMode = SK_RLMT_CHECK_LINK | - SK_RLMT_CHECK_LOC_LINK | - SK_RLMT_CHECK_SEG; - } else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) && - (pAC->GIni.GIMacsFound == 2)) { - pAC->RlmtMode = SK_RLMT_CHECK_LINK; - pAC->RlmtNets = 2; - } else { - printk("sk98lin: Illegal value \"%s\" for" - " RlmtMode, using default\n", - RlmtMode[pAC->Index]); - pAC->RlmtMode = 0; - } - } else { - pAC->RlmtMode = 0; - } - - /* - ** Check the interrupt moderation parameters - */ - if (Moderation[pAC->Index] != NULL) { - if (strcmp(Moderation[pAC->Index], "") == 0) { - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; - } else if (strcmp(Moderation[pAC->Index], "Static") == 0) { - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_STATIC; - } else if (strcmp(Moderation[pAC->Index], "Dynamic") == 0) { - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_DYNAMIC; - } else if (strcmp(Moderation[pAC->Index], "None") == 0) { - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; - } else { - printk("sk98lin: Illegal value \"%s\" for Moderation.\n" - " Disable interrupt moderation.\n", - Moderation[pAC->Index]); - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; - } - } else { - pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; - } - - if (Stats[pAC->Index] != NULL) { - if (strcmp(Stats[pAC->Index], "Yes") == 0) { - pAC->DynIrqModInfo.DisplayStats = SK_TRUE; - } else { - pAC->DynIrqModInfo.DisplayStats = SK_FALSE; - } - } else { - pAC->DynIrqModInfo.DisplayStats = SK_FALSE; - } - - if (ModerationMask[pAC->Index] != NULL) { - if (strcmp(ModerationMask[pAC->Index], "Rx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; - } else if (strcmp(ModerationMask[pAC->Index], "Tx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_ONLY; - } else if (strcmp(ModerationMask[pAC->Index], "Sp") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_ONLY; - } else if (strcmp(ModerationMask[pAC->Index], "RxSp") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; - } else if (strcmp(ModerationMask[pAC->Index], "SpRx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; - } else if (strcmp(ModerationMask[pAC->Index], "RxTx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; - } else if (strcmp(ModerationMask[pAC->Index], "TxRx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; - } else if (strcmp(ModerationMask[pAC->Index], "TxSp") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; - } else if (strcmp(ModerationMask[pAC->Index], "SpTx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; - } else if (strcmp(ModerationMask[pAC->Index], "RxTxSp") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else if (strcmp(ModerationMask[pAC->Index], "RxSpTx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else if (strcmp(ModerationMask[pAC->Index], "TxRxSp") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else if (strcmp(ModerationMask[pAC->Index], "TxSpRx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else if (strcmp(ModerationMask[pAC->Index], "SpTxRx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else if (strcmp(ModerationMask[pAC->Index], "SpRxTx") == 0) { - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; - } else { /* some rubbish */ - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; - } - } else { /* operator has stated nothing */ - pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; - } - - if (AutoSizing[pAC->Index] != NULL) { - if (strcmp(AutoSizing[pAC->Index], "On") == 0) { - pAC->DynIrqModInfo.AutoSizing = SK_FALSE; - } else { - pAC->DynIrqModInfo.AutoSizing = SK_FALSE; - } - } else { /* operator has stated nothing */ - pAC->DynIrqModInfo.AutoSizing = SK_FALSE; - } - - if (IntsPerSec[pAC->Index] != 0) { - if ((IntsPerSec[pAC->Index]< C_INT_MOD_IPS_LOWER_RANGE) || - (IntsPerSec[pAC->Index] > C_INT_MOD_IPS_UPPER_RANGE)) { - printk("sk98lin: Illegal value \"%d\" for IntsPerSec. (Range: %d - %d)\n" - " Using default value of %i.\n", - IntsPerSec[pAC->Index], - C_INT_MOD_IPS_LOWER_RANGE, - C_INT_MOD_IPS_UPPER_RANGE, - C_INTS_PER_SEC_DEFAULT); - pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; - } else { - pAC->DynIrqModInfo.MaxModIntsPerSec = IntsPerSec[pAC->Index]; - } - } else { - pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; - } - - /* - ** Evaluate upper and lower moderation threshold - */ - pAC->DynIrqModInfo.MaxModIntsPerSecUpperLimit = - pAC->DynIrqModInfo.MaxModIntsPerSec + - (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); - - pAC->DynIrqModInfo.MaxModIntsPerSecLowerLimit = - pAC->DynIrqModInfo.MaxModIntsPerSec - - (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); - - pAC->DynIrqModInfo.PrevTimeVal = jiffies; /* initial value */ - - -} /* GetConfiguration */ - - -/***************************************************************************** - * - * ProductStr - return a adapter identification string from vpd - * - * Description: - * This function reads the product name string from the vpd area - * and puts it the field pAC->DeviceString. - * - * Returns: N/A - */ -static inline int ProductStr( - SK_AC *pAC, /* pointer to adapter context */ - char *DeviceStr, /* result string */ - int StrLen /* length of the string */ -) -{ -char Keyword[] = VPD_NAME; /* vpd productname identifier */ -int ReturnCode; /* return code from vpd_read */ -unsigned long Flags; - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - return ReturnCode; -} /* ProductStr */ - -/***************************************************************************** - * - * StartDrvCleanupTimer - Start timer to check for descriptors which - * might be placed in descriptor ring, but - * havent been handled up to now - * - * Description: - * This function requests a HW-timer fo the Yukon card. The actions to - * perform when this timer expires, are located in the SkDrvEvent(). - * - * Returns: N/A - */ -static void -StartDrvCleanupTimer(SK_AC *pAC) { - SK_EVPARA EventParam; /* Event struct for timer event */ - - SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); - EventParam.Para32[0] = SK_DRV_RX_CLEANUP_TIMER; - SkTimerStart(pAC, pAC->IoBase, &pAC->DrvCleanupTimer, - SK_DRV_RX_CLEANUP_TIMER_LENGTH, - SKGE_DRV, SK_DRV_TIMER, EventParam); -} - -/***************************************************************************** - * - * StopDrvCleanupTimer - Stop timer to check for descriptors - * - * Description: - * This function requests a HW-timer fo the Yukon card. The actions to - * perform when this timer expires, are located in the SkDrvEvent(). - * - * Returns: N/A - */ -static void -StopDrvCleanupTimer(SK_AC *pAC) { - SkTimerStop(pAC, pAC->IoBase, &pAC->DrvCleanupTimer); - SK_MEMSET((char *) &pAC->DrvCleanupTimer, 0, sizeof(SK_TIMER)); -} - -/****************************************************************************/ -/* functions for common modules *********************************************/ -/****************************************************************************/ - - -/***************************************************************************** - * - * SkDrvAllocRlmtMbuf - allocate an RLMT mbuf - * - * Description: - * This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure - * is embedded into a socket buff data area. - * - * Context: - * runtime - * - * Returns: - * NULL or pointer to Mbuf. - */ -SK_MBUF *SkDrvAllocRlmtMbuf( -SK_AC *pAC, /* pointer to adapter context */ -SK_IOC IoC, /* the IO-context */ -unsigned BufferSize) /* size of the requested buffer */ -{ -SK_MBUF *pRlmtMbuf; /* pointer to a new rlmt-mbuf structure */ -struct sk_buff *pMsgBlock; /* pointer to a new message block */ - - pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC); - if (pMsgBlock == NULL) { - return (NULL); - } - pRlmtMbuf = (SK_MBUF*) pMsgBlock->data; - skb_reserve(pMsgBlock, sizeof(SK_MBUF)); - pRlmtMbuf->pNext = NULL; - pRlmtMbuf->pOs = pMsgBlock; - pRlmtMbuf->pData = pMsgBlock->data; /* Data buffer. */ - pRlmtMbuf->Size = BufferSize; /* Data buffer size. */ - pRlmtMbuf->Length = 0; /* Length of packet (<= Size). */ - return (pRlmtMbuf); - -} /* SkDrvAllocRlmtMbuf */ - - -/***************************************************************************** - * - * SkDrvFreeRlmtMbuf - free an RLMT mbuf - * - * Description: - * This routine frees one or more RLMT mbuf(s). - * - * Context: - * runtime - * - * Returns: - * Nothing - */ -void SkDrvFreeRlmtMbuf( -SK_AC *pAC, /* pointer to adapter context */ -SK_IOC IoC, /* the IO-context */ -SK_MBUF *pMbuf) /* size of the requested buffer */ -{ -SK_MBUF *pFreeMbuf; -SK_MBUF *pNextMbuf; - - pFreeMbuf = pMbuf; - do { - pNextMbuf = pFreeMbuf->pNext; - DEV_KFREE_SKB_ANY(pFreeMbuf->pOs); - pFreeMbuf = pNextMbuf; - } while ( pFreeMbuf != NULL ); -} /* SkDrvFreeRlmtMbuf */ - - -/***************************************************************************** - * - * SkOsGetTime - provide a time value - * - * Description: - * This routine provides a time value. The unit is 1/HZ (defined by Linux). - * It is not used for absolute time, but only for time differences. - * - * - * Returns: - * Time value - */ -SK_U64 SkOsGetTime(SK_AC *pAC) -{ - SK_U64 PrivateJiffies; - SkOsGetTimeCurrent(pAC, &PrivateJiffies); - return PrivateJiffies; -} /* SkOsGetTime */ - - -/***************************************************************************** - * - * SkPciReadCfgDWord - read a 32 bit value from pci config space - * - * Description: - * This routine reads a 32 bit value from the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciReadCfgDWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U32 *pVal) /* pointer to store the read value */ -{ - pci_read_config_dword(pAC->PciDev, PciAddr, pVal); - return(0); -} /* SkPciReadCfgDWord */ - - -/***************************************************************************** - * - * SkPciReadCfgWord - read a 16 bit value from pci config space - * - * Description: - * This routine reads a 16 bit value from the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciReadCfgWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U16 *pVal) /* pointer to store the read value */ -{ - pci_read_config_word(pAC->PciDev, PciAddr, pVal); - return(0); -} /* SkPciReadCfgWord */ - - -/***************************************************************************** - * - * SkPciReadCfgByte - read a 8 bit value from pci config space - * - * Description: - * This routine reads a 8 bit value from the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciReadCfgByte( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U8 *pVal) /* pointer to store the read value */ -{ - pci_read_config_byte(pAC->PciDev, PciAddr, pVal); - return(0); -} /* SkPciReadCfgByte */ - - -/***************************************************************************** - * - * SkPciWriteCfgWord - write a 16 bit value to pci config space - * - * Description: - * This routine writes a 16 bit value to the pci configuration - * space. The flag PciConfigUp indicates whether the config space - * is accesible or must be set up first. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciWriteCfgWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U16 Val) /* pointer to store the read value */ -{ - pci_write_config_word(pAC->PciDev, PciAddr, Val); - return(0); -} /* SkPciWriteCfgWord */ - - -/***************************************************************************** - * - * SkPciWriteCfgWord - write a 8 bit value to pci config space - * - * Description: - * This routine writes a 8 bit value to the pci configuration - * space. The flag PciConfigUp indicates whether the config space - * is accesible or must be set up first. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciWriteCfgByte( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U8 Val) /* pointer to store the read value */ -{ - pci_write_config_byte(pAC->PciDev, PciAddr, Val); - return(0); -} /* SkPciWriteCfgByte */ - - -/***************************************************************************** - * - * SkDrvEvent - handle driver events - * - * Description: - * This function handles events from all modules directed to the driver - * - * Context: - * Is called under protection of slow path lock. - * - * Returns: - * 0 if everything ok - * < 0 on error - * - */ -int SkDrvEvent( -SK_AC *pAC, /* pointer to adapter context */ -SK_IOC IoC, /* io-context */ -SK_U32 Event, /* event-id */ -SK_EVPARA Param) /* event-parameter */ -{ -SK_MBUF *pRlmtMbuf; /* pointer to a rlmt-mbuf structure */ -struct sk_buff *pMsg; /* pointer to a message block */ -int FromPort; /* the port from which we switch away */ -int ToPort; /* the port we switch to */ -SK_EVPARA NewPara; /* parameter for further events */ -int Stat; -unsigned long Flags; -SK_BOOL DualNet; - - switch (Event) { - case SK_DRV_ADAP_FAIL: - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("ADAPTER FAIL EVENT\n")); - printk("%s: Adapter failed.\n", pAC->dev[0]->name); - /* disable interrupts */ - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - /* cgoos */ - break; - case SK_DRV_PORT_FAIL: - FromPort = Param.Para32[0]; - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("PORT FAIL EVENT, Port: %d\n", FromPort)); - if (FromPort == 0) { - printk("%s: Port A failed.\n", pAC->dev[0]->name); - } else { - printk("%s: Port B failed.\n", pAC->dev[1]->name); - } - /* cgoos */ - break; - case SK_DRV_PORT_RESET: /* SK_U32 PortIdx */ - /* action list 4 */ - FromPort = Param.Para32[0]; - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("PORT RESET EVENT, Port: %d ", FromPort)); - NewPara.Para64 = FromPort; - SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); - spin_lock_irqsave( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - - SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); - netif_carrier_off(pAC->dev[Param.Para32[0]]); - spin_unlock_irqrestore( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - - /* clear rx ring from received frames */ - ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); - - ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); - spin_lock_irqsave( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - - /* tschilling: Handling of return value inserted. */ - if (SkGeInitPort(pAC, IoC, FromPort)) { - if (FromPort == 0) { - printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name); - } else { - printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name); - } - } - SkAddrMcUpdate(pAC,IoC, FromPort); - PortReInitBmu(pAC, FromPort); - SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); - ClearAndStartRx(pAC, FromPort); - spin_unlock_irqrestore( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - break; - case SK_DRV_NET_UP: /* SK_U32 PortIdx */ - { struct net_device *dev = pAC->dev[Param.Para32[0]]; - /* action list 5 */ - FromPort = Param.Para32[0]; - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("NET UP EVENT, Port: %d ", Param.Para32[0])); - /* Mac update */ - SkAddrMcUpdate(pAC,IoC, FromPort); - - if (DoPrintInterfaceChange) { - printk("%s: network connection up using" - " port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]); - - /* tschilling: Values changed according to LinkSpeedUsed. */ - Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed; - if (Stat == SK_LSPEED_STAT_10MBPS) { - printk(" speed: 10\n"); - } else if (Stat == SK_LSPEED_STAT_100MBPS) { - printk(" speed: 100\n"); - } else if (Stat == SK_LSPEED_STAT_1000MBPS) { - printk(" speed: 1000\n"); - } else { - printk(" speed: unknown\n"); - } - - - Stat = pAC->GIni.GP[FromPort].PLinkModeStatus; - if (Stat == SK_LMODE_STAT_AUTOHALF || - Stat == SK_LMODE_STAT_AUTOFULL) { - printk(" autonegotiation: yes\n"); - } - else { - printk(" autonegotiation: no\n"); - } - if (Stat == SK_LMODE_STAT_AUTOHALF || - Stat == SK_LMODE_STAT_HALF) { - printk(" duplex mode: half\n"); - } - else { - printk(" duplex mode: full\n"); - } - Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus; - if (Stat == SK_FLOW_STAT_REM_SEND ) { - printk(" flowctrl: remote send\n"); - } - else if (Stat == SK_FLOW_STAT_LOC_SEND ){ - printk(" flowctrl: local send\n"); - } - else if (Stat == SK_FLOW_STAT_SYMMETRIC ){ - printk(" flowctrl: symmetric\n"); - } - else { - printk(" flowctrl: none\n"); - } - - /* tschilling: Check against CopperType now. */ - if ((pAC->GIni.GICopperType == SK_TRUE) && - (pAC->GIni.GP[FromPort].PLinkSpeedUsed == - SK_LSPEED_STAT_1000MBPS)) { - Stat = pAC->GIni.GP[FromPort].PMSStatus; - if (Stat == SK_MS_STAT_MASTER ) { - printk(" role: master\n"); - } - else if (Stat == SK_MS_STAT_SLAVE ) { - printk(" role: slave\n"); - } - else { - printk(" role: ???\n"); - } - } - - /* - Display dim (dynamic interrupt moderation) - informations - */ - if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) - printk(" irq moderation: static (%d ints/sec)\n", - pAC->DynIrqModInfo.MaxModIntsPerSec); - else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) - printk(" irq moderation: dynamic (%d ints/sec)\n", - pAC->DynIrqModInfo.MaxModIntsPerSec); - else - printk(" irq moderation: disabled\n"); - - - printk(" scatter-gather: %s\n", - (dev->features & NETIF_F_SG) ? "enabled" : "disabled"); - printk(" tx-checksum: %s\n", - (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled"); - printk(" rx-checksum: %s\n", - pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled"); - - } else { - DoPrintInterfaceChange = SK_TRUE; - } - - if ((Param.Para32[0] != pAC->ActivePort) && - (pAC->RlmtNets == 1)) { - NewPara.Para32[0] = pAC->ActivePort; - NewPara.Para32[1] = Param.Para32[0]; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN, - NewPara); - } - - /* Inform the world that link protocol is up. */ - netif_carrier_on(dev); - break; - } - case SK_DRV_NET_DOWN: /* SK_U32 Reason */ - /* action list 7 */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("NET DOWN EVENT ")); - if (DoPrintInterfaceChange) { - printk("%s: network connection down\n", - pAC->dev[Param.Para32[1]]->name); - } else { - DoPrintInterfaceChange = SK_TRUE; - } - netif_carrier_off(pAC->dev[Param.Para32[1]]); - break; - case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("PORT SWITCH HARD ")); - case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ - /* action list 6 */ - printk("%s: switching to port %c\n", pAC->dev[0]->name, - 'A'+Param.Para32[1]); - case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ - FromPort = Param.Para32[0]; - ToPort = Param.Para32[1]; - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("PORT SWITCH EVENT, From: %d To: %d (Pref %d) ", - FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort)); - NewPara.Para64 = FromPort; - SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); - NewPara.Para64 = ToPort; - SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); - spin_lock_irqsave( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); - SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST); - SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST); - spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); - spin_unlock_irqrestore( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - - ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */ - ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */ - - ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); - ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]); - spin_lock_irqsave( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); - pAC->ActivePort = ToPort; -#if 0 - SetQueueSizes(pAC); -#else - /* tschilling: New common function with minimum size check. */ - DualNet = SK_FALSE; - if (pAC->RlmtNets == 2) { - DualNet = SK_TRUE; - } - - if (SkGeInitAssignRamToQueues( - pAC, - pAC->ActivePort, - DualNet)) { - spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); - spin_unlock_irqrestore( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - printk("SkGeInitAssignRamToQueues failed.\n"); - break; - } -#endif - /* tschilling: Handling of return values inserted. */ - if (SkGeInitPort(pAC, IoC, FromPort) || - SkGeInitPort(pAC, IoC, ToPort)) { - printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name); - } - if (Event == SK_DRV_SWITCH_SOFT) { - SkMacRxTxEnable(pAC, IoC, FromPort); - } - SkMacRxTxEnable(pAC, IoC, ToPort); - SkAddrSwap(pAC, IoC, FromPort, ToPort); - SkAddrMcUpdate(pAC, IoC, FromPort); - SkAddrMcUpdate(pAC, IoC, ToPort); - PortReInitBmu(pAC, FromPort); - PortReInitBmu(pAC, ToPort); - SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); - SkGePollTxD(pAC, IoC, ToPort, SK_TRUE); - ClearAndStartRx(pAC, FromPort); - ClearAndStartRx(pAC, ToPort); - spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); - spin_unlock_irqrestore( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, - Flags); - break; - case SK_DRV_RLMT_SEND: /* SK_MBUF *pMb */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("RLS ")); - pRlmtMbuf = (SK_MBUF*) Param.pParaPtr; - pMsg = (struct sk_buff*) pRlmtMbuf->pOs; - skb_put(pMsg, pRlmtMbuf->Length); - if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW], - pMsg) < 0) - - DEV_KFREE_SKB_ANY(pMsg); - break; - case SK_DRV_TIMER: - if (Param.Para32[0] == SK_DRV_MODERATION_TIMER) { - /* - ** expiration of the moderation timer implies that - ** dynamic moderation is to be applied - */ - SkDimStartModerationTimer(pAC); - SkDimModerate(pAC); - if (pAC->DynIrqModInfo.DisplayStats) { - SkDimDisplayModerationSettings(pAC); - } - } else if (Param.Para32[0] == SK_DRV_RX_CLEANUP_TIMER) { - /* - ** check if we need to check for descriptors which - ** haven't been handled the last millisecs - */ - StartDrvCleanupTimer(pAC); - if (pAC->GIni.GIMacsFound == 2) { - ReceiveIrq(pAC, &pAC->RxPort[1], SK_FALSE); - } - ReceiveIrq(pAC, &pAC->RxPort[0], SK_FALSE); - } else { - printk("Expiration of unknown timer\n"); - } - break; - default: - break; - } - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, - ("END EVENT ")); - - return (0); -} /* SkDrvEvent */ - - -/***************************************************************************** - * - * SkErrorLog - log errors - * - * Description: - * This function logs errors to the system buffer and to the console - * - * Returns: - * 0 if everything ok - * < 0 on error - * - */ -void SkErrorLog( -SK_AC *pAC, -int ErrClass, -int ErrNum, -char *pErrorMsg) -{ -char ClassStr[80]; - - switch (ErrClass) { - case SK_ERRCL_OTHER: - strcpy(ClassStr, "Other error"); - break; - case SK_ERRCL_CONFIG: - strcpy(ClassStr, "Configuration error"); - break; - case SK_ERRCL_INIT: - strcpy(ClassStr, "Initialization error"); - break; - case SK_ERRCL_NORES: - strcpy(ClassStr, "Out of resources error"); - break; - case SK_ERRCL_SW: - strcpy(ClassStr, "internal Software error"); - break; - case SK_ERRCL_HW: - strcpy(ClassStr, "Hardware failure"); - break; - case SK_ERRCL_COMM: - strcpy(ClassStr, "Communication error"); - break; - } - printk(KERN_INFO "%s: -- ERROR --\n Class: %s\n" - " Nr: 0x%x\n Msg: %s\n", pAC->dev[0]->name, - ClassStr, ErrNum, pErrorMsg); - -} /* SkErrorLog */ - -#ifdef SK_DIAG_SUPPORT - -/***************************************************************************** - * - * SkDrvEnterDiagMode - handles DIAG attach request - * - * Description: - * Notify the kernel to NOT access the card any longer due to DIAG - * Deinitialize the Card - * - * Returns: - * int - */ -int SkDrvEnterDiagMode( -SK_AC *pAc) /* pointer to adapter context */ -{ - DEV_NET *pNet = netdev_priv(pAc->dev[0]); - SK_AC *pAC = pNet->pAC; - - SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct), - sizeof(SK_PNMI_STRUCT_DATA)); - - pAC->DiagModeActive = DIAG_ACTIVE; - if (pAC->BoardLevel > SK_INIT_DATA) { - if (netif_running(pAC->dev[0])) { - pAC->WasIfUp[0] = SK_TRUE; - pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ - DoPrintInterfaceChange = SK_FALSE; - SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ - } else { - pAC->WasIfUp[0] = SK_FALSE; - } - if (pNet != netdev_priv(pAC->dev[1])) { - pNet = netdev_priv(pAC->dev[1]); - if (netif_running(pAC->dev[1])) { - pAC->WasIfUp[1] = SK_TRUE; - pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ - DoPrintInterfaceChange = SK_FALSE; - SkDrvDeInitAdapter(pAC, 1); /* do SkGeClose */ - } else { - pAC->WasIfUp[1] = SK_FALSE; - } - } - pAC->BoardLevel = SK_INIT_DATA; - } - return(0); -} - -/***************************************************************************** - * - * SkDrvLeaveDiagMode - handles DIAG detach request - * - * Description: - * Notify the kernel to may access the card again after use by DIAG - * Initialize the Card - * - * Returns: - * int - */ -int SkDrvLeaveDiagMode( -SK_AC *pAc) /* pointer to adapter control context */ -{ - SK_MEMCPY(&(pAc->PnmiStruct), &(pAc->PnmiBackup), - sizeof(SK_PNMI_STRUCT_DATA)); - pAc->DiagModeActive = DIAG_NOTACTIVE; - pAc->Pnmi.DiagAttached = SK_DIAG_IDLE; - if (pAc->WasIfUp[0] == SK_TRUE) { - pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ - DoPrintInterfaceChange = SK_FALSE; - SkDrvInitAdapter(pAc, 0); /* first device */ - } - if (pAc->WasIfUp[1] == SK_TRUE) { - pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ - DoPrintInterfaceChange = SK_FALSE; - SkDrvInitAdapter(pAc, 1); /* second device */ - } - return(0); -} - -/***************************************************************************** - * - * ParseDeviceNbrFromSlotName - Evaluate PCI device number - * - * Description: - * This function parses the PCI slot name information string and will - * retrieve the devcie number out of it. The slot_name maintianed by - * linux is in the form of '02:0a.0', whereas the first two characters - * represent the bus number in hex (in the sample above this is - * pci bus 0x02) and the next two characters the device number (0x0a). - * - * Returns: - * SK_U32: The device number from the PCI slot name - */ - -static SK_U32 ParseDeviceNbrFromSlotName( -const char *SlotName) /* pointer to pci slot name eg. '02:0a.0' */ -{ - char *CurrCharPos = (char *) SlotName; - int FirstNibble = -1; - int SecondNibble = -1; - SK_U32 Result = 0; - - while (*CurrCharPos != '\0') { - if (*CurrCharPos == ':') { - while (*CurrCharPos != '.') { - CurrCharPos++; - if ( (*CurrCharPos >= '0') && - (*CurrCharPos <= '9')) { - if (FirstNibble == -1) { - /* dec. value for '0' */ - FirstNibble = *CurrCharPos - 48; - } else { - SecondNibble = *CurrCharPos - 48; - } - } else if ( (*CurrCharPos >= 'a') && - (*CurrCharPos <= 'f') ) { - if (FirstNibble == -1) { - FirstNibble = *CurrCharPos - 87; - } else { - SecondNibble = *CurrCharPos - 87; - } - } else { - Result = 0; - } - } - - Result = FirstNibble; - Result = Result << 4; /* first nibble is higher one */ - Result = Result | SecondNibble; - } - CurrCharPos++; /* next character */ - } - return (Result); -} - -/**************************************************************************** - * - * SkDrvDeInitAdapter - deinitialize adapter (this function is only - * called if Diag attaches to that card) - * - * Description: - * Close initialized adapter. - * - * Returns: - * 0 - on success - * error code - on error - */ -static int SkDrvDeInitAdapter( -SK_AC *pAC, /* pointer to adapter context */ -int devNbr) /* what device is to be handled */ -{ - struct SK_NET_DEVICE *dev; - - dev = pAC->dev[devNbr]; - - /* On Linux 2.6 the network driver does NOT mess with reference - ** counts. The driver MUST be able to be unloaded at any time - ** due to the possibility of hotplug. - */ - if (SkGeClose(dev) != 0) { - return (-1); - } - return (0); - -} /* SkDrvDeInitAdapter() */ - -/**************************************************************************** - * - * SkDrvInitAdapter - Initialize adapter (this function is only - * called if Diag deattaches from that card) - * - * Description: - * Close initialized adapter. - * - * Returns: - * 0 - on success - * error code - on error - */ -static int SkDrvInitAdapter( -SK_AC *pAC, /* pointer to adapter context */ -int devNbr) /* what device is to be handled */ -{ - struct SK_NET_DEVICE *dev; - - dev = pAC->dev[devNbr]; - - if (SkGeOpen(dev) != 0) { - return (-1); - } - - /* - ** Use correct MTU size and indicate to kernel TX queue can be started - */ - if (SkGeChangeMtu(dev, dev->mtu) != 0) { - return (-1); - } - return (0); - -} /* SkDrvInitAdapter */ - -#endif - -#ifdef DEBUG -/****************************************************************************/ -/* "debug only" section *****************************************************/ -/****************************************************************************/ - - -/***************************************************************************** - * - * DumpMsg - print a frame - * - * Description: - * This function prints frames to the system logfile/to the console. - * - * Returns: N/A - * - */ -static void DumpMsg(struct sk_buff *skb, char *str) -{ - int msglen; - - if (skb == NULL) { - printk("DumpMsg(): NULL-Message\n"); - return; - } - - if (skb->data == NULL) { - printk("DumpMsg(): Message empty\n"); - return; - } - - msglen = skb->len; - if (msglen > 64) - msglen = 64; - - printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len); - - DumpData((char *)skb->data, msglen); - - printk("------- End of message ---------\n"); -} /* DumpMsg */ - - - -/***************************************************************************** - * - * DumpData - print a data area - * - * Description: - * This function prints a area of data to the system logfile/to the - * console. - * - * Returns: N/A - * - */ -static void DumpData(char *p, int size) -{ -register int i; -int haddr, addr; -char hex_buffer[180]; -char asc_buffer[180]; -char HEXCHAR[] = "0123456789ABCDEF"; - - addr = 0; - haddr = 0; - hex_buffer[0] = 0; - asc_buffer[0] = 0; - for (i=0; i < size; ) { - if (*p >= '0' && *p <='z') - asc_buffer[addr] = *p; - else - asc_buffer[addr] = '.'; - addr++; - asc_buffer[addr] = 0; - hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4]; - haddr++; - hex_buffer[haddr] = HEXCHAR[*p & 0x0f]; - haddr++; - hex_buffer[haddr] = ' '; - haddr++; - hex_buffer[haddr] = 0; - p++; - i++; - if (i%16 == 0) { - printk("%s %s\n", hex_buffer, asc_buffer); - addr = 0; - haddr = 0; - } - } -} /* DumpData */ - - -/***************************************************************************** - * - * DumpLong - print a data area as long values - * - * Description: - * This function prints a area of data to the system logfile/to the - * console. - * - * Returns: N/A - * - */ -static void DumpLong(char *pc, int size) -{ -register int i; -int haddr, addr; -char hex_buffer[180]; -char asc_buffer[180]; -char HEXCHAR[] = "0123456789ABCDEF"; -long *p; -int l; - - addr = 0; - haddr = 0; - hex_buffer[0] = 0; - asc_buffer[0] = 0; - p = (long*) pc; - for (i=0; i < size; ) { - l = (long) *p; - hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf]; - haddr++; - hex_buffer[haddr] = HEXCHAR[l & 0x0f]; - haddr++; - hex_buffer[haddr] = ' '; - haddr++; - hex_buffer[haddr] = 0; - p++; - i++; - if (i%8 == 0) { - printk("%4x %s\n", (i-8)*4, hex_buffer); - haddr = 0; - } - } - printk("------------------------\n"); -} /* DumpLong */ - -#endif - -static int __devinit skge_probe_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - SK_AC *pAC; - DEV_NET *pNet = NULL; - struct net_device *dev = NULL; - static int boards_found = 0; - int error = -ENODEV; - int using_dac = 0; - char DeviceStr[80]; - - if (pci_enable_device(pdev)) - goto out; - - /* Configure DMA attributes. */ - if (sizeof(dma_addr_t) > sizeof(u32) && - !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) { - using_dac = 1; - error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (error < 0) { - printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA " - "for consistent allocations\n", pci_name(pdev)); - goto out_disable_device; - } - } else { - error = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (error) { - printk(KERN_ERR "sk98lin %s no usable DMA configuration\n", - pci_name(pdev)); - goto out_disable_device; - } - } - - error = -ENOMEM; - dev = alloc_etherdev(sizeof(DEV_NET)); - if (!dev) { - printk(KERN_ERR "sk98lin: unable to allocate etherdev " - "structure!\n"); - goto out_disable_device; - } - - pNet = netdev_priv(dev); - pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL); - if (!pNet->pAC) { - printk(KERN_ERR "sk98lin: unable to allocate adapter " - "structure!\n"); - goto out_free_netdev; - } - - pAC = pNet->pAC; - pAC->PciDev = pdev; - - pAC->dev[0] = dev; - pAC->dev[1] = dev; - pAC->CheckQueue = SK_FALSE; - - dev->irq = pdev->irq; - - error = SkGeInitPCI(pAC); - if (error) { - printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error); - goto out_free_netdev; - } - - dev->open = &SkGeOpen; - dev->stop = &SkGeClose; - dev->hard_start_xmit = &SkGeXmit; - dev->get_stats = &SkGeStats; - dev->set_multicast_list = &SkGeSetRxMode; - dev->set_mac_address = &SkGeSetMacAddr; - dev->do_ioctl = &SkGeIoctl; - dev->change_mtu = &SkGeChangeMtu; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = &SkGePollController; -#endif - SET_NETDEV_DEV(dev, &pdev->dev); - SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); - - /* Use only if yukon hardware */ - if (pAC->ChipsetType) { -#ifdef USE_SK_TX_CHECKSUM - dev->features |= NETIF_F_IP_CSUM; -#endif -#ifdef SK_ZEROCOPY - dev->features |= NETIF_F_SG; -#endif -#ifdef USE_SK_RX_CHECKSUM - pAC->RxPort[0].RxCsum = 1; -#endif - } - - if (using_dac) - dev->features |= NETIF_F_HIGHDMA; - - pAC->Index = boards_found++; - - error = SkGeBoardInit(dev, pAC); - if (error) - goto out_free_netdev; - - /* Read Adapter name from VPD */ - if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) { - error = -EIO; - printk(KERN_ERR "sk98lin: Could not read VPD data.\n"); - goto out_free_resources; - } - - /* Register net device */ - error = register_netdev(dev); - if (error) { - printk(KERN_ERR "sk98lin: Could not register device.\n"); - goto out_free_resources; - } - - /* Print adapter specific string from vpd */ - printk("%s: %s\n", dev->name, DeviceStr); - - /* Print configuration settings */ - printk(" PrefPort:%c RlmtMode:%s\n", - 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, - (pAC->RlmtMode==0) ? "Check Link State" : - ((pAC->RlmtMode==1) ? "Check Link State" : - ((pAC->RlmtMode==3) ? "Check Local Port" : - ((pAC->RlmtMode==7) ? "Check Segmentation" : - ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); - - SkGeYellowLED(pAC, pAC->IoBase, 1); - - memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - - pNet->PortNr = 0; - pNet->NetNr = 0; - - boards_found++; - - pci_set_drvdata(pdev, dev); - - /* More then one port found */ - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - dev = alloc_etherdev(sizeof(DEV_NET)); - if (!dev) { - printk(KERN_ERR "sk98lin: unable to allocate etherdev " - "structure!\n"); - goto single_port; - } - - pNet = netdev_priv(dev); - pNet->PortNr = 1; - pNet->NetNr = 1; - pNet->pAC = pAC; - - dev->open = &SkGeOpen; - dev->stop = &SkGeClose; - dev->hard_start_xmit = &SkGeXmit; - dev->get_stats = &SkGeStats; - dev->set_multicast_list = &SkGeSetRxMode; - dev->set_mac_address = &SkGeSetMacAddr; - dev->do_ioctl = &SkGeIoctl; - dev->change_mtu = &SkGeChangeMtu; - SET_NETDEV_DEV(dev, &pdev->dev); - SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); - - if (pAC->ChipsetType) { -#ifdef USE_SK_TX_CHECKSUM - dev->features |= NETIF_F_IP_CSUM; -#endif -#ifdef SK_ZEROCOPY - dev->features |= NETIF_F_SG; -#endif -#ifdef USE_SK_RX_CHECKSUM - pAC->RxPort[1].RxCsum = 1; -#endif - } - - if (using_dac) - dev->features |= NETIF_F_HIGHDMA; - - error = register_netdev(dev); - if (error) { - printk(KERN_ERR "sk98lin: Could not register device" - " for second port. (%d)\n", error); - free_netdev(dev); - goto single_port; - } - - pAC->dev[1] = dev; - memcpy(&dev->dev_addr, - &pAC->Addr.Net[1].CurrentMacAddress, 6); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - - printk("%s: %s\n", dev->name, DeviceStr); - printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); - } - -single_port: - - /* Save the hardware revision */ - pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + - (pAC->GIni.GIPciHwRev & 0x0F); - - /* Set driver globals */ - pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME; - pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE; - - memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA)); - memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA)); - - return 0; - - out_free_resources: - FreeResources(dev); - out_free_netdev: - free_netdev(dev); - out_disable_device: - pci_disable_device(pdev); - out: - return error; -} - -static void __devexit skge_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - struct net_device *otherdev = pAC->dev[1]; - - unregister_netdev(dev); - - SkGeYellowLED(pAC, pAC->IoBase, 0); - - if (pAC->BoardLevel == SK_INIT_RUN) { - SK_EVPARA EvPara; - unsigned long Flags; - - /* board is still alive */ - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - EvPara.Para32[0] = 0; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - EvPara.Para32[0] = 1; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - /* disable interrupts */ - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - SkGeDeInit(pAC, pAC->IoBase); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - pAC->BoardLevel = SK_INIT_DATA; - /* We do NOT check here, if IRQ was pending, of course*/ - } - - if (pAC->BoardLevel == SK_INIT_IO) { - /* board is still alive */ - SkGeDeInit(pAC, pAC->IoBase); - pAC->BoardLevel = SK_INIT_DATA; - } - - FreeResources(dev); - free_netdev(dev); - if (otherdev != dev) - free_netdev(otherdev); - kfree(pAC); -} - -#ifdef CONFIG_PM -static int skge_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - struct net_device *otherdev = pAC->dev[1]; - - if (netif_running(dev)) { - netif_carrier_off(dev); - DoPrintInterfaceChange = SK_FALSE; - SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ - netif_device_detach(dev); - } - if (otherdev != dev) { - if (netif_running(otherdev)) { - netif_carrier_off(otherdev); - DoPrintInterfaceChange = SK_FALSE; - SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */ - netif_device_detach(otherdev); - } - } - - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); - if (pAC->AllocFlag & SK_ALLOC_IRQ) { - free_irq(dev->irq, dev); - } - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - - return 0; -} - -static int skge_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - struct net_device *otherdev = pAC->dev[1]; - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - if (ret) { - printk(KERN_WARNING "sk98lin: unable to enable device %s " - "in resume\n", dev->name); - goto err_out; - } - pci_set_master(pdev); - if (pAC->GIni.GIMacsFound == 2) - ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); - else - ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev); - if (ret) { - printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq); - ret = -EBUSY; - goto err_out_disable_pdev; - } - - netif_device_attach(dev); - if (netif_running(dev)) { - DoPrintInterfaceChange = SK_FALSE; - SkDrvInitAdapter(pAC, 0); /* first device */ - } - if (otherdev != dev) { - netif_device_attach(otherdev); - if (netif_running(otherdev)) { - DoPrintInterfaceChange = SK_FALSE; - SkDrvInitAdapter(pAC, 1); /* second device */ - } - } - - return 0; - -err_out_disable_pdev: - pci_disable_device(pdev); -err_out: - pAC->AllocFlag &= ~SK_ALLOC_IRQ; - dev->irq = 0; - return ret; -} -#else -#define skge_suspend NULL -#define skge_resume NULL -#endif - -static struct pci_device_id skge_pci_tbl[] = { -#ifdef SK98LIN_ALL_DEVICES - { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#endif -#ifdef GENESIS - /* Generic SysKonnect SK-98xx Gigabit Ethernet Server Adapter */ - { PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#endif - /* Generic SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter */ - { PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#ifdef SK98LIN_ALL_DEVICES -/* DLink card does not have valid VPD so this driver gags - * { PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - */ - { PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, }, - { PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#endif - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, skge_pci_tbl); - -static struct pci_driver skge_driver = { - .name = "sk98lin", - .id_table = skge_pci_tbl, - .probe = skge_probe_one, - .remove = __devexit_p(skge_remove_one), - .suspend = skge_suspend, - .resume = skge_resume, -}; - -static int __init skge_init(void) -{ - printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver" - " and is scheduled for removal\n"); - - return pci_register_driver(&skge_driver); -} - -static void __exit skge_exit(void) -{ - pci_unregister_driver(&skge_driver); -} - -module_init(skge_init); -module_exit(skge_exit); diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c deleted file mode 100644 index db67099..0000000 --- a/drivers/net/sk98lin/skgehwt.c +++ /dev/null @@ -1,171 +0,0 @@ -/****************************************************************************** - * - * Name: skgehwt.c - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.15 $ - * Date: $Date: 2003/09/16 13:41:23 $ - * Purpose: Hardware Timer - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * Event queue and dispatcher - */ -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell."; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ - -#ifdef __C2MAN__ -/* - * Hardware Timer function queue management. - */ -intro() -{} -#endif - -/* - * Prototypes of local functions. - */ -#define SK_HWT_MAX (65000) - -/* correction factor */ -#define SK_HWT_FAC (1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100) - -/* - * Initialize hardware timer. - * - * Must be called during init level 1. - */ -void SkHwtInit( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc) /* IoContext */ -{ - pAC->Hwt.TStart = 0 ; - pAC->Hwt.TStop = 0 ; - pAC->Hwt.TActive = SK_FALSE; - - SkHwtStop(pAC, Ioc); -} - -/* - * - * Start hardware timer (clock ticks are 16us). - * - */ -void SkHwtStart( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc, /* IoContext */ -SK_U32 Time) /* Time in units of 16us to load the timer with. */ -{ - SK_U32 Cnt; - - if (Time > SK_HWT_MAX) - Time = SK_HWT_MAX; - - pAC->Hwt.TStart = Time; - pAC->Hwt.TStop = 0L; - - Cnt = Time; - - /* - * if time < 16 us - * time = 16 us - */ - if (!Cnt) { - Cnt++; - } - - SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC); - - SK_OUT16(Ioc, B2_TI_CTRL, TIM_START); /* Start timer. */ - - pAC->Hwt.TActive = SK_TRUE; -} - -/* - * Stop hardware timer. - * and clear the timer IRQ - */ -void SkHwtStop( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc) /* IoContext */ -{ - SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP); - - SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ); - - pAC->Hwt.TActive = SK_FALSE; -} - - -/* - * Stop hardware timer and read time elapsed since last start. - * - * returns - * The elapsed time since last start in units of 16us. - * - */ -SK_U32 SkHwtRead( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc) /* IoContext */ -{ - SK_U32 TRead; - SK_U32 IStatus; - - if (pAC->Hwt.TActive) { - - SkHwtStop(pAC, Ioc); - - SK_IN32(Ioc, B2_TI_VAL, &TRead); - TRead /= SK_HWT_FAC; - - SK_IN32(Ioc, B0_ISRC, &IStatus); - - /* Check if timer expired (or wraped around) */ - if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) { - - SkHwtStop(pAC, Ioc); - - pAC->Hwt.TStop = pAC->Hwt.TStart; - } - else { - - pAC->Hwt.TStop = pAC->Hwt.TStart - TRead; - } - } - return(pAC->Hwt.TStop); -} - -/* - * interrupt source= timer - */ -void SkHwtIsr( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc) /* IoContext */ -{ - SkHwtStop(pAC, Ioc); - - pAC->Hwt.TStop = pAC->Hwt.TStart; - - SkTimerDone(pAC, Ioc); -} - -/* End of file */ diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c deleted file mode 100644 index 67f1d6a..0000000 --- a/drivers/net/sk98lin/skgeinit.c +++ /dev/null @@ -1,2005 +0,0 @@ -/****************************************************************************** - * - * Name: skgeinit.c - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.97 $ - * Date: $Date: 2003/10/02 16:45:31 $ - * Purpose: Contains functions to initialize the adapter - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" - -/* global variables ***********************************************************/ - -/* local variables ************************************************************/ - -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell."; -#endif - -struct s_QOffTab { - int RxQOff; /* Receive Queue Address Offset */ - int XsQOff; /* Sync Tx Queue Address Offset */ - int XaQOff; /* Async Tx Queue Address Offset */ -}; -static struct s_QOffTab QOffTab[] = { - {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2} -}; - -struct s_Config { - char ScanString[8]; - SK_U32 Value; -}; - -static struct s_Config OemConfig = { - {'O','E','M','_','C','o','n','f'}, -#ifdef SK_OEM_CONFIG - OEM_CONFIG_VALUE, -#else - 0, -#endif -}; - -/****************************************************************************** - * - * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings - * - * Description: - * Enable or disable the descriptor polling of the transmit descriptor - * ring(s) (TxD) for port 'Port'. - * The new configuration is *not* saved over any SkGeStopPort() and - * SkGeInitPort() calls. - * - * Returns: - * nothing - */ -void SkGePollTxD( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */ -{ - SK_GEPORT *pPrt; - SK_U32 DWord; - - pPrt = &pAC->GIni.GP[Port]; - - DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL); - - if (pPrt->PXSQSize != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord); - } - - if (pPrt->PXAQSize != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord); - } -} /* SkGePollTxD */ - - -/****************************************************************************** - * - * SkGeYellowLED() - Switch the yellow LED on or off. - * - * Description: - * Switch the yellow LED on or off. - * - * Note: - * This function may be called any time after SkGeInit(Level 1). - * - * Returns: - * nothing - */ -void SkGeYellowLED( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int State) /* yellow LED state, 0 = OFF, 0 != ON */ -{ - if (State == 0) { - /* Switch yellow LED OFF */ - SK_OUT8(IoC, B0_LED, LED_STAT_OFF); - } - else { - /* Switch yellow LED ON */ - SK_OUT8(IoC, B0_LED, LED_STAT_ON); - } -} /* SkGeYellowLED */ - - -#if (!defined(SK_SLIM) || defined(GENESIS)) -/****************************************************************************** - * - * SkGeXmitLED() - Modify the Operational Mode of a transmission LED. - * - * Description: - * The Rx or Tx LED which is specified by 'Led' will be - * enabled, disabled or switched on in test mode. - * - * Note: - * 'Led' must contain the address offset of the LEDs INI register. - * - * Usage: - * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); - * - * Returns: - * nothing - */ -void SkGeXmitLED( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Led, /* offset to the LED Init Value register */ -int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */ -{ - SK_U32 LedIni; - - switch (Mode) { - case SK_LED_ENA: - LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; - SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni); - SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); - break; - case SK_LED_TST: - SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON); - SK_OUT32(IoC, Led + XMIT_LED_CNT, 100); - SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); - break; - case SK_LED_DIS: - default: - /* - * Do NOT stop the LED Timer here. The LED might be - * in on state. But it needs to go off. - */ - SK_OUT32(IoC, Led + XMIT_LED_CNT, 0); - SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF); - break; - } - - /* - * 1000BT: The Transmit LED is driven by the PHY. - * But the default LED configuration is used for - * Level One and Broadcom PHYs. - * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.) - * (In this case it has to be added here. But we will see. XXX) - */ -} /* SkGeXmitLED */ -#endif /* !SK_SLIM || GENESIS */ - - -/****************************************************************************** - * - * DoCalcAddr() - Calculates the start and the end address of a queue. - * - * Description: - * This function calculates the start and the end address of a queue. - * Afterwards the 'StartVal' is incremented to the next start position. - * If the port is already initialized the calculated values - * will be checked against the configured values and an - * error will be returned, if they are not equal. - * If the port is not initialized the values will be written to - * *StartAdr and *EndAddr. - * - * Returns: - * 0: success - * 1: configuration error - */ -static int DoCalcAddr( -SK_AC *pAC, /* adapter context */ -SK_GEPORT SK_FAR *pPrt, /* port index */ -int QuSize, /* size of the queue to configure in kB */ -SK_U32 SK_FAR *StartVal, /* start value for address calculation */ -SK_U32 SK_FAR *QuStartAddr,/* start addr to calculate */ -SK_U32 SK_FAR *QuEndAddr) /* end address to calculate */ -{ - SK_U32 EndVal; - SK_U32 NextStart; - int Rtv; - - Rtv = 0; - if (QuSize == 0) { - EndVal = *StartVal; - NextStart = EndVal; - } - else { - EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1; - NextStart = EndVal + 1; - } - - if (pPrt->PState >= SK_PRT_INIT) { - if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) { - Rtv = 1; - } - } - else { - *QuStartAddr = *StartVal; - *QuEndAddr = EndVal; - } - - *StartVal = NextStart; - return(Rtv); -} /* DoCalcAddr */ - -/****************************************************************************** - * - * SkGeInitAssignRamToQueues() - allocate default queue sizes - * - * Description: - * This function assigns the memory to the different queues and ports. - * When DualNet is set to SK_TRUE all ports get the same amount of memory. - * Otherwise the first port gets most of the memory and all the - * other ports just the required minimum. - * This function can only be called when pAC->GIni.GIRamSize and - * pAC->GIni.GIMacsFound have been initialized, usually this happens - * at init level 1 - * - * Returns: - * 0 - ok - * 1 - invalid input values - * 2 - not enough memory - */ - -int SkGeInitAssignRamToQueues( -SK_AC *pAC, /* Adapter context */ -int ActivePort, /* Active Port in RLMT mode */ -SK_BOOL DualNet) /* adapter context */ -{ - int i; - int UsedKilobytes; /* memory already assigned */ - int ActivePortKilobytes; /* memory available for active port */ - SK_GEPORT *pGePort; - - UsedKilobytes = 0; - - if (ActivePort >= pAC->GIni.GIMacsFound) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, - ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n", - ActivePort)); - return(1); - } - if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) + - ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, - ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n", - pAC->GIni.GIRamSize)); - return(2); - } - - if (DualNet) { - /* every port gets the same amount of memory */ - ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound; - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - - pGePort = &pAC->GIni.GP[i]; - - /* take away the minimum memory for active queues */ - ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); - - /* receive queue gets the minimum + 80% of the rest */ - pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB(( - ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100)) - + SK_MIN_RXQ_SIZE; - - ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); - - /* synchronous transmit queue */ - pGePort->PXSQSize = 0; - - /* asynchronous transmit queue */ - pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes + - SK_MIN_TXQ_SIZE); - } - } - else { - /* Rlmt Mode or single link adapter */ - - /* Set standby queue size defaults for all standby ports */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - - if (i != ActivePort) { - pGePort = &pAC->GIni.GP[i]; - - pGePort->PRxQSize = SK_MIN_RXQ_SIZE; - pGePort->PXAQSize = SK_MIN_TXQ_SIZE; - pGePort->PXSQSize = 0; - - /* Count used RAM */ - UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize; - } - } - /* what's left? */ - ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes; - - /* assign it to the active port */ - /* first take away the minimum memory */ - ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); - pGePort = &pAC->GIni.GP[ActivePort]; - - /* receive queue get's the minimum + 80% of the rest */ - pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes * - (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE; - - ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); - - /* synchronous transmit queue */ - pGePort->PXSQSize = 0; - - /* asynchronous transmit queue */ - pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) + - SK_MIN_TXQ_SIZE; - } -#ifdef VCPU - VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n", - pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize); -#endif /* VCPU */ - - return(0); -} /* SkGeInitAssignRamToQueues */ - -/****************************************************************************** - * - * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration - * - * Description: - * This function verifies the Queue Size Configuration specified - * in the variables PRxQSize, PXSQSize, and PXAQSize of all - * used ports. - * This requirements must be fullfilled to have a valid configuration: - * - The size of all queues must not exceed GIRamSize. - * - The queue sizes must be specified in units of 8 kB. - * - The size of Rx queues of available ports must not be - * smaller than 16 kB. - * - The size of at least one Tx queue (synch. or asynch.) - * of available ports must not be smaller than 16 kB - * when Jumbo Frames are used. - * - The RAM start and end addresses must not be changed - * for ports which are already initialized. - * Furthermore SkGeCheckQSize() defines the Start and End Addresses - * of all ports and stores them into the HWAC port structure. - * - * Returns: - * 0: Queue Size Configuration valid - * 1: Queue Size Configuration invalid - */ -static int SkGeCheckQSize( -SK_AC *pAC, /* adapter context */ -int Port) /* port index */ -{ - SK_GEPORT *pPrt; - int i; - int Rtv; - int Rtv2; - SK_U32 StartAddr; -#ifndef SK_SLIM - int UsedMem; /* total memory used (max. found ports) */ -#endif - - Rtv = 0; - -#ifndef SK_SLIM - - UsedMem = 0; - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - pPrt = &pAC->GIni.GP[i]; - - if ((pPrt->PRxQSize & QZ_UNITS) != 0 || - (pPrt->PXSQSize & QZ_UNITS) != 0 || - (pPrt->PXAQSize & QZ_UNITS) != 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); - return(1); - } - - if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG); - return(1); - } - - /* - * the size of at least one Tx queue (synch. or asynch.) has to be > 0. - * if Jumbo Frames are used, this size has to be >= 16 kB. - */ - if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) || - (pAC->GIni.GIPortUsage == SK_JUMBO_LINK && - ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) || - (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG); - return(1); - } - - UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize; - } - - if (UsedMem > pAC->GIni.GIRamSize) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); - return(1); - } -#endif /* !SK_SLIM */ - - /* Now start address calculation */ - StartAddr = pAC->GIni.GIRamOffs; - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - pPrt = &pAC->GIni.GP[i]; - - /* Calculate/Check values for the receive queue */ - Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr, - &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd); - Rtv |= Rtv2; - - /* Calculate/Check values for the synchronous Tx queue */ - Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr, - &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd); - Rtv |= Rtv2; - - /* Calculate/Check values for the asynchronous Tx queue */ - Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr, - &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd); - Rtv |= Rtv2; - - if (Rtv) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG); - return(1); - } - } - - return(0); -} /* SkGeCheckQSize */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkGeInitMacArb() - Initialize the MAC Arbiter - * - * Description: - * This function initializes the MAC Arbiter. - * It must not be called if there is still an - * initialized or active port. - * - * Returns: - * nothing - */ -static void SkGeInitMacArb( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - /* release local reset */ - SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR); - - /* configure timeout values */ - SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53); - SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53); - SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53); - SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53); - - SK_OUT8(IoC, B3_MA_RCINI_RX1, 0); - SK_OUT8(IoC, B3_MA_RCINI_RX2, 0); - SK_OUT8(IoC, B3_MA_RCINI_TX1, 0); - SK_OUT8(IoC, B3_MA_RCINI_TX2, 0); - - /* recovery values are needed for XMAC II Rev. B2 only */ - /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */ - - /* - * There is no start or enable button to push, therefore - * the MAC arbiter is configured and enabled now. - */ -} /* SkGeInitMacArb */ - - -/****************************************************************************** - * - * SkGeInitPktArb() - Initialize the Packet Arbiter - * - * Description: - * This function initializes the Packet Arbiter. - * It must not be called if there is still an - * initialized or active port. - * - * Returns: - * nothing - */ -static void SkGeInitPktArb( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - /* release local reset */ - SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR); - - /* configure timeout values */ - SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX); - SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX); - SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX); - SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX); - - /* - * enable timeout timers if jumbo frames not used - * NOTE: the packet arbiter timeout interrupt is needed for - * half duplex hangup workaround - */ - if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) { - if (pAC->GIni.GIMacsFound == 1) { - SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1); - } - else { - SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2); - } - } -} /* SkGeInitPktArb */ -#endif /* GENESIS */ - - -/****************************************************************************** - * - * SkGeInitMacFifo() - Initialize the MAC FIFOs - * - * Description: - * Initialize all MAC FIFOs of the specified port - * - * Returns: - * nothing - */ -static void SkGeInitMacFifo( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U16 Word; -#ifdef VCPU - SK_U32 DWord; -#endif /* VCPU */ - /* - * For each FIFO: - * - release local reset - * - use default value for MAC FIFO size - * - setup defaults for the control register - * - enable the FIFO - */ - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* Configure Rx MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR); - SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF); - SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD); - - /* Configure Tx MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR); - SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); - SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD); - - /* Enable frame flushing if jumbo frames used */ - if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { - SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH); - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* set Rx GMAC FIFO Flush Mask */ - SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK); - - Word = (SK_U16)GMF_RX_CTRL_DEF; - - /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */ - if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) { - - Word &= ~GMF_RX_F_FL_ON; - } - - /* Configure Rx MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); - SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word); - - /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */ - SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); - - /* Configure Tx MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); - SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF); - -#ifdef VCPU - SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord); - SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord); -#endif /* VCPU */ - - /* set Tx GMAC FIFO Almost Empty Threshold */ -/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */ - } -#endif /* YUKON */ - -} /* SkGeInitMacFifo */ - -#ifdef SK_LNK_SYNC_CNT -/****************************************************************************** - * - * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting - * - * Description: - * This function starts the Link Sync Counter of the specified - * port and enables the generation of an Link Sync IRQ. - * The Link Sync Counter may be used to detect an active link, - * if autonegotiation is not used. - * - * Note: - * o To ensure receiving the Link Sync Event the LinkSyncCounter - * should be initialized BEFORE clearing the XMAC's reset! - * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this - * function. - * - * Returns: - * nothing - */ -void SkGeLoadLnkSyncCnt( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_U32 CntVal) /* Counter value */ -{ - SK_U32 OrgIMsk; - SK_U32 NewIMsk; - SK_U32 ISrc; - SK_BOOL IrqPend; - - /* stop counter */ - SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP); - - /* - * ASIC problem: - * Each time starting the Link Sync Counter an IRQ is generated - * by the adapter. See problem report entry from 21.07.98 - * - * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ - * if no IRQ is already pending. - */ - IrqPend = SK_FALSE; - SK_IN32(IoC, B0_ISRC, &ISrc); - SK_IN32(IoC, B0_IMSK, &OrgIMsk); - if (Port == MAC_1) { - NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1; - if ((ISrc & IS_LNK_SYNC_M1) != 0) { - IrqPend = SK_TRUE; - } - } - else { - NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2; - if ((ISrc & IS_LNK_SYNC_M2) != 0) { - IrqPend = SK_TRUE; - } - } - if (!IrqPend) { - SK_OUT32(IoC, B0_IMSK, NewIMsk); - } - - /* load counter */ - SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal); - - /* start counter */ - SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START); - - if (!IrqPend) { - /* clear the unexpected IRQ, and restore the interrupt mask */ - SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ); - SK_OUT32(IoC, B0_IMSK, OrgIMsk); - } -} /* SkGeLoadLnkSyncCnt*/ -#endif /* SK_LNK_SYNC_CNT */ - -#if defined(SK_DIAG) || defined(SK_CFG_SYNC) -/****************************************************************************** - * - * SkGeCfgSync() - Configure synchronous bandwidth for this port. - * - * Description: - * This function may be used to configure synchronous bandwidth - * to the specified port. This may be done any time after - * initializing the port. The configuration values are NOT saved - * in the HWAC port structure and will be overwritten any - * time when stopping and starting the port. - * Any values for the synchronous configuration will be ignored - * if the size of the synchronous queue is zero! - * - * The default configuration for the synchronous service is - * TXA_ENA_FSYNC. This means if the size of - * the synchronous queue is unequal zero but no specific - * synchronous bandwidth is configured, the synchronous queue - * will always have the 'unlimited' transmit priority! - * - * This mode will be restored if the synchronous bandwidth is - * deallocated ('IntTime' = 0 and 'LimCount' = 0). - * - * Returns: - * 0: success - * 1: parameter configuration error - * 2: try to configure quality of service although no - * synchronous queue is configured - */ -int SkGeCfgSync( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_U32 IntTime, /* Interval Timer Value in units of 8ns */ -SK_U32 LimCount, /* Number of bytes to transfer during IntTime */ -int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */ -{ - int Rtv; - - Rtv = 0; - - /* check the parameters */ - if (LimCount > IntTime || - (LimCount == 0 && IntTime != 0) || - (LimCount != 0 && IntTime == 0)) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); - return(1); - } - - if (pAC->GIni.GP[Port].PXSQSize == 0) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG); - return(2); - } - - /* calculate register values */ - IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100; - LimCount = LimCount / 8; - - if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); - return(1); - } - - /* - * - Enable 'Force Sync' to ensure the synchronous queue - * has the priority while configuring the new values. - * - Also 'disable alloc' to ensure the settings complies - * to the SyncMode parameter. - * - Disable 'Rate Control' to configure the new values. - * - write IntTime and LimCount - * - start 'Rate Control' and disable 'Force Sync' - * if Interval Timer or Limit Counter not zero. - */ - SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), - TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); - - SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime); - SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount); - - SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), - (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC))); - - if (IntTime != 0 || LimCount != 0) { - SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC); - } - - return(0); -} /* SkGeCfgSync */ -#endif /* SK_DIAG || SK_CFG_SYNC*/ - - -/****************************************************************************** - * - * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue - * - * Desccription: - * If the queue is used, enable and initialize it. - * Make sure the queue is still reset, if it is not used. - * - * Returns: - * nothing - */ -static void DoInitRamQueue( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int QuIoOffs, /* Queue IO Address Offset */ -SK_U32 QuStartAddr, /* Queue Start Address */ -SK_U32 QuEndAddr, /* Queue End Address */ -int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */ -{ - SK_U32 RxUpThresVal; - SK_U32 RxLoThresVal; - - if (QuStartAddr != QuEndAddr) { - /* calculate thresholds, assume we have a big Rx queue */ - RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8; - RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8; - - /* build HW address format */ - QuStartAddr = QuStartAddr / 8; - QuEndAddr = QuEndAddr / 8; - - /* release local reset */ - SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR); - - /* configure addresses */ - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr); - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr); - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr); - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr); - - switch (QuType) { - case SK_RX_SRAM_Q: - /* configure threshold for small Rx Queue */ - RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8; - - /* continue with SK_RX_BRAM_Q */ - case SK_RX_BRAM_Q: - /* write threshold for Rx Queue */ - - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal); - SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal); - - /* the high priority threshold not used */ - break; - case SK_TX_RAM_Q: - /* - * Do NOT use Store & Forward under normal operation due to - * performance optimization (GENESIS only). - * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB) - * or YUKON is used ((GMAC Tx FIFO is only 1 kB) - * we NEED Store & Forward of the RAM buffer. - */ - if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK || - pAC->GIni.GIYukon) { - /* enable Store & Forward Mode for the Tx Side */ - SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD); - } - break; - } - - /* set queue operational */ - SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD); - } - else { - /* ensure the queue is still disabled */ - SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET); - } -} /* DoInitRamQueue */ - - -/****************************************************************************** - * - * SkGeInitRamBufs() - Initialize the RAM Buffer Queues - * - * Description: - * Initialize all RAM Buffer Queues of the specified port - * - * Returns: - * nothing - */ -static void SkGeInitRamBufs( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - int RxQType; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) { - RxQType = SK_RX_SRAM_Q; /* small Rx Queue */ - } - else { - RxQType = SK_RX_BRAM_Q; /* big Rx Queue */ - } - - DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart, - pPrt->PRxQRamEnd, RxQType); - - DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart, - pPrt->PXsQRamEnd, SK_TX_RAM_Q); - - DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart, - pPrt->PXaQRamEnd, SK_TX_RAM_Q); - -} /* SkGeInitRamBufs */ - - -/****************************************************************************** - * - * SkGeInitRamIface() - Initialize the RAM Interface - * - * Description: - * This function initializes the Adapters RAM Interface. - * - * Note: - * This function is used in the diagnostics. - * - * Returns: - * nothing - */ -static void SkGeInitRamIface( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - /* release local reset */ - SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR); - - /* configure timeout values */ - SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53); - SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53); - -} /* SkGeInitRamIface */ - - -/****************************************************************************** - * - * SkGeInitBmu() - Initialize the BMU state machines - * - * Description: - * Initialize all BMU state machines of the specified port - * - * Returns: - * nothing - */ -static void SkGeInitBmu( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U32 RxWm; - SK_U32 TxWm; - - pPrt = &pAC->GIni.GP[Port]; - - RxWm = SK_BMU_RX_WM; - TxWm = SK_BMU_TX_WM; - - if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) { - /* for better performance */ - RxWm /= 2; - TxWm /= 2; - } - - /* Rx Queue: Release all local resets and set the watermark */ - SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET); - SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm); - - /* - * Tx Queue: Release all local resets if the queue is used ! - * set watermark - */ - if (pPrt->PXSQSize != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET); - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm); - } - - if (pPrt->PXAQSize != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET); - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm); - } - /* - * Do NOT enable the descriptor poll timers here, because - * the descriptor addresses are not specified yet. - */ -} /* SkGeInitBmu */ - - -/****************************************************************************** - * - * TestStopBit() - Test the stop bit of the queue - * - * Description: - * Stopping a queue is not as simple as it seems to be. - * If descriptor polling is enabled, it may happen - * that RX/TX stop is done and SV idle is NOT set. - * In this case we have to issue another stop command. - * - * Returns: - * The queues control status register - */ -static SK_U32 TestStopBit( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int QuIoOffs) /* Queue IO Address Offset */ -{ - SK_U32 QuCsr; /* CSR contents */ - - SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); - - if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) { - /* Stop Descriptor overridden by start command */ - SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP); - - SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); - } - - return(QuCsr); -} /* TestStopBit */ - - -/****************************************************************************** - * - * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'. - * - * Description: - * After calling this function the descriptor rings and Rx and Tx - * queues of this port may be reconfigured. - * - * It is possible to stop the receive and transmit path separate or - * both together. - * - * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC. - * The receive queue is still active and - * the pending Rx frames may be still transferred - * into the RxD. - * SK_STOP_RX Stop the receive path. The tansmit path - * has to be stopped once before. - * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX - * - * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive. - * SK_HARD_RST Resets the MAC and the PHY. - * - * Example: - * 1) A Link Down event was signaled for a port. Therefore the activity - * of this port should be stopped and a hardware reset should be issued - * to enable the workaround of XMAC Errata #2. But the received frames - * should not be discarded. - * ... - * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST); - * (transfer all pending Rx frames) - * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST); - * ... - * - * 2) An event was issued which request the driver to switch - * the 'virtual active' link to an other already active port - * as soon as possible. The frames in the receive queue of this - * port may be lost. But the PHY must not be reset during this - * event. - * ... - * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST); - * ... - * - * Extended Description: - * If SK_STOP_TX is set, - * o disable the MAC's receive and transmitter to prevent - * from sending incomplete frames - * o stop the port's transmit queues before terminating the - * BMUs to prevent from performing incomplete PCI cycles - * on the PCI bus - * - The network Rx and Tx activity and PCI Tx transfer is - * disabled now. - * o reset the MAC depending on the RstMode - * o Stop Interval Timer and Limit Counter of Tx Arbiter, - * also disable Force Sync bit and Enable Alloc bit. - * o perform a local reset of the port's Tx path - * - reset the PCI FIFO of the async Tx queue - * - reset the PCI FIFO of the sync Tx queue - * - reset the RAM Buffer async Tx queue - * - reset the RAM Buffer sync Tx queue - * - reset the MAC Tx FIFO - * o switch Link and Tx LED off, stop the LED counters - * - * If SK_STOP_RX is set, - * o stop the port's receive queue - * - The path data transfer activity is fully stopped now. - * o perform a local reset of the port's Rx path - * - reset the PCI FIFO of the Rx queue - * - reset the RAM Buffer receive queue - * - reset the MAC Rx FIFO - * o switch Rx LED off, stop the LED counter - * - * If all ports are stopped, - * o reset the RAM Interface. - * - * Notes: - * o This function may be called during the driver states RESET_PORT and - * SWITCH_PORT. - */ -void SkGeStopPort( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* I/O context */ -int Port, /* port to stop (MAC_1 + n) */ -int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */ -int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ -{ -#ifndef SK_DIAG - SK_EVPARA Para; -#endif /* !SK_DIAG */ - SK_GEPORT *pPrt; - SK_U32 DWord; - SK_U32 XsCsr; - SK_U32 XaCsr; - SK_U64 ToutStart; - int i; - int ToutCnt; - - pPrt = &pAC->GIni.GP[Port]; - - if ((Dir & SK_STOP_TX) != 0) { - /* disable receiver and transmitter */ - SkMacRxTxDisable(pAC, IoC, Port); - - /* stop both transmit queues */ - /* - * If the BMU is in the reset state CSR_STOP will terminate - * immediately. - */ - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP); - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP); - - ToutStart = SkOsGetTime(pAC); - ToutCnt = 0; - do { - /* - * Clear packet arbiter timeout to make sure - * this loop will terminate. - */ - SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? - PA_CLR_TO_TX1 : PA_CLR_TO_TX2)); - - /* - * If the transfer stucks at the MAC the STOP command will not - * terminate if we don't flush the XMAC's transmit FIFO ! - */ - SkMacFlushTxFifo(pAC, IoC, Port); - - XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff); - XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff); - - if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) { - /* - * Timeout of 1/18 second reached. - * This needs to be checked at 1/18 sec only. - */ - ToutCnt++; - if (ToutCnt > 1) { - /* Might be a problem when the driver event handler - * calls StopPort again. XXX. - */ - - /* Fatal Error, Loop aborted */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018, - SKERR_HWI_E018MSG); -#ifndef SK_DIAG - Para.Para64 = Port; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); -#endif /* !SK_DIAG */ - return; - } - /* - * Cache incoherency workaround: Assume a start command - * has been lost while sending the frame. - */ - ToutStart = SkOsGetTime(pAC); - - if ((XsCsr & CSR_STOP) != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START); - } - if ((XaCsr & CSR_STOP) != 0) { - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START); - } - } - - /* - * Because of the ASIC problem report entry from 21.08.1998 it is - * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set. - */ - } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE || - (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); - - /* Reset the MAC depending on the RstMode */ - if (RstMode == SK_SOFT_RST) { - SkMacSoftRst(pAC, IoC, Port); - } - else { - SkMacHardRst(pAC, IoC, Port); - } - - /* Disable Force Sync bit and Enable Alloc bit */ - SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), - TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); - - /* Stop Interval Timer and Limit Counter of Tx Arbiter */ - SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L); - SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L); - - /* Perform a local reset of the port's Tx path */ - - /* Reset the PCI FIFO of the async Tx queue */ - SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET); - /* Reset the PCI FIFO of the sync Tx queue */ - SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET); - /* Reset the RAM Buffer async Tx queue */ - SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET); - /* Reset the RAM Buffer sync Tx queue */ - SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET); - - /* Reset Tx MAC FIFO */ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* Note: MFF_RST_SET does NOT reset the XMAC ! */ - SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET); - - /* switch Link and Tx LED off, stop the LED counters */ - /* Link LED is switched off by the RLMT and the Diag itself */ - SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* Reset TX MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); - } -#endif /* YUKON */ - } - - if ((Dir & SK_STOP_RX) != 0) { - /* - * The RX Stop Command will not terminate if no buffers - * are queued in the RxD ring. But it will always reach - * the Idle state. Therefore we can use this feature to - * stop the transfer of received packets. - */ - /* stop the port's receive queue */ - SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP); - - i = 100; - do { - /* - * Clear packet arbiter timeout to make sure - * this loop will terminate - */ - SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? - PA_CLR_TO_RX1 : PA_CLR_TO_RX2)); - - DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff); - - /* timeout if i==0 (bug fix for #10748) */ - if (--i == 0) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024, - SKERR_HWI_E024MSG); - break; - } - /* - * because of the ASIC problem report entry from 21.08.98 - * it is required to wait until CSR_STOP is reset and - * CSR_SV_IDLE is set. - */ - } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); - - /* The path data transfer activity is fully stopped now */ - - /* Perform a local reset of the port's Rx path */ - - /* Reset the PCI FIFO of the Rx queue */ - SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET); - /* Reset the RAM Buffer receive queue */ - SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET); - - /* Reset Rx MAC FIFO */ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET); - - /* switch Rx LED off, stop the LED counter */ - SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* Reset Rx MAC FIFO */ - SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); - } -#endif /* YUKON */ - } -} /* SkGeStopPort */ - - -/****************************************************************************** - * - * SkGeInit0() - Level 0 Initialization - * - * Description: - * - Initialize the BMU address offsets - * - * Returns: - * nothing - */ -static void SkGeInit0( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - int i; - SK_GEPORT *pPrt; - - for (i = 0; i < SK_MAX_MACS; i++) { - pPrt = &pAC->GIni.GP[i]; - - pPrt->PState = SK_PRT_RESET; - pPrt->PRxQOff = QOffTab[i].RxQOff; - pPrt->PXsQOff = QOffTab[i].XsQOff; - pPrt->PXaQOff = QOffTab[i].XaQOff; - pPrt->PCheckPar = SK_FALSE; - pPrt->PIsave = 0; - pPrt->PPrevShorts = 0; - pPrt->PLinkResCt = 0; - pPrt->PAutoNegTOCt = 0; - pPrt->PPrevRx = 0; - pPrt->PPrevFcs = 0; - pPrt->PRxLim = SK_DEF_RX_WA_LIM; - pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; - pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS; - pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS; - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN; - pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE; - pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; - pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL | - SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL); - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; - pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; - pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; - pPrt->PMSCap = 0; - pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO; - pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET; - pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN; - pPrt->PAutoNegFail = SK_FALSE; - pPrt->PHWLinkUp = SK_FALSE; - pPrt->PLinkBroken = SK_TRUE; /* See WA code */ - pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE; - pPrt->PMacColThres = TX_COL_DEF; - pPrt->PMacJamLen = TX_JAM_LEN_DEF; - pPrt->PMacJamIpgVal = TX_JAM_IPG_DEF; - pPrt->PMacJamIpgData = TX_IPG_JAM_DEF; - pPrt->PMacIpgData = IPG_DATA_DEF; - pPrt->PMacLimit4 = SK_FALSE; - } - - pAC->GIni.GIPortUsage = SK_RED_LINK; - pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value; - pAC->GIni.GIValIrqMask = IS_ALL_MSK; - -} /* SkGeInit0*/ - - -/****************************************************************************** - * - * SkGeInit1() - Level 1 Initialization - * - * Description: - * o Do a software reset. - * o Clear all reset bits. - * o Verify that the detected hardware is present. - * Return an error if not. - * o Get the hardware configuration - * + Read the number of MACs/Ports. - * + Read the RAM size. - * + Read the PCI Revision Id. - * + Find out the adapters host clock speed - * + Read and check the PHY type - * - * Returns: - * 0: success - * 5: Unexpected PHY type detected - * 6: HW self test failed - */ -static int SkGeInit1( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - SK_U8 Byte; - SK_U16 Word; - SK_U16 CtrlStat; - SK_U32 DWord; - int RetVal; - int i; - - RetVal = 0; - - /* save CLK_RUN bits (YUKON-Lite) */ - SK_IN16(IoC, B0_CTST, &CtrlStat); - - /* do the SW-reset */ - SK_OUT8(IoC, B0_CTST, CS_RST_SET); - - /* release the SW-reset */ - SK_OUT8(IoC, B0_CTST, CS_RST_CLR); - - /* reset all error bits in the PCI STATUS register */ - /* - * Note: PCI Cfg cycles cannot be used, because they are not - * available on some platforms after 'boot time'. - */ - SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); - SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - - /* release Master Reset */ - SK_OUT8(IoC, B0_CTST, CS_MRST_CLR); - -#ifdef CLK_RUN - CtrlStat |= CS_CLK_RUN_ENA; -#endif /* CLK_RUN */ - - /* restore CLK_RUN bits */ - SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat & - (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA))); - - /* read Chip Identification Number */ - SK_IN8(IoC, B2_CHIP_ID, &Byte); - pAC->GIni.GIChipId = Byte; - - /* read number of MACs */ - SK_IN8(IoC, B2_MAC_CFG, &Byte); - pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2; - - /* get Chip Revision Number */ - pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4); - - /* get diff. PCI parameters */ - SK_IN16(IoC, B0_CTST, &CtrlStat); - - /* read the adapters RAM size */ - SK_IN8(IoC, B2_E_0, &Byte); - - pAC->GIni.GIGenesis = SK_FALSE; - pAC->GIni.GIYukon = SK_FALSE; - pAC->GIni.GIYukonLite = SK_FALSE; - -#ifdef GENESIS - if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { - - pAC->GIni.GIGenesis = SK_TRUE; - - if (Byte == (SK_U8)3) { - /* special case: 4 x 64k x 36, offset = 0x80000 */ - pAC->GIni.GIRamSize = 1024; - pAC->GIni.GIRamOffs = (SK_U32)512 * 1024; - } - else { - pAC->GIni.GIRamSize = (int)Byte * 512; - pAC->GIni.GIRamOffs = 0; - } - /* all GE adapters work with 53.125 MHz host clock */ - pAC->GIni.GIHstClkFact = SK_FACT_53; - - /* set Descr. Poll Timer Init Value to 250 ms */ - pAC->GIni.GIPollTimerVal = - SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100; - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) { - - pAC->GIni.GIYukon = SK_TRUE; - - pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4; - - pAC->GIni.GIRamOffs = 0; - - /* WA for chip Rev. A */ - pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON && - pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0; - - /* get PM Capabilities of PCI config space */ - SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word); - - /* check if VAUX is available */ - if (((CtrlStat & CS_VAUX_AVAIL) != 0) && - /* check also if PME from D3cold is set */ - ((Word & PCI_PME_D3C_SUP) != 0)) { - /* set entry in GE init struct */ - pAC->GIni.GIVauxAvail = SK_TRUE; - } - - if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) { - /* this is Rev. A1 */ - pAC->GIni.GIYukonLite = SK_TRUE; - } - else { - /* save Flash-Address Register */ - SK_IN32(IoC, B2_FAR, &DWord); - - /* test Flash-Address Register */ - SK_OUT8(IoC, B2_FAR + 3, 0xff); - SK_IN8(IoC, B2_FAR + 3, &Byte); - - if (Byte != 0) { - /* this is Rev. A0 */ - pAC->GIni.GIYukonLite = SK_TRUE; - - /* restore Flash-Address Register */ - SK_OUT32(IoC, B2_FAR, DWord); - } - } - - /* switch power to VCC (WA for VAUX problem) */ - SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA | - PC_VAUX_OFF | PC_VCC_ON)); - - /* read the Interrupt source */ - SK_IN32(IoC, B0_ISRC, &DWord); - - if ((DWord & IS_HW_ERR) != 0) { - /* read the HW Error Interrupt source */ - SK_IN32(IoC, B0_HWE_ISRC, &DWord); - - if ((DWord & IS_IRQ_SENSOR) != 0) { - /* disable HW Error IRQ */ - pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; - } - } - - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - /* set GMAC Link Control reset */ - SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET); - - /* clear GMAC Link Control reset */ - SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR); - } - /* all YU chips work with 78.125 MHz host clock */ - pAC->GIni.GIHstClkFact = SK_FACT_78; - - pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */ - } -#endif /* YUKON */ - - /* check if 64-bit PCI Slot is present */ - pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0); - - /* check if 66 MHz PCI Clock is active */ - pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0); - - /* read PCI HW Revision Id. */ - SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte); - pAC->GIni.GIPciHwRev = Byte; - - /* read the PMD type */ - SK_IN8(IoC, B2_PMD_TYP, &Byte); - pAC->GIni.GICopperType = (SK_U8)(Byte == 'T'); - - /* read the PHY type */ - SK_IN8(IoC, B2_E_1, &Byte); - - Byte &= 0x0f; /* the PHY type is stored in the lower nibble */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - switch (Byte) { - case SK_PHY_XMAC: - pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC; - break; - case SK_PHY_BCOM: - pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM; - pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | - SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE; - break; - case SK_PHY_NAT: - pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT; - break; -#endif /* OTHER_PHY */ - default: - /* ERROR: unexpected PHY type detected */ - RetVal = 5; - break; - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - if (Byte < (SK_U8)SK_PHY_MARV_COPPER) { - /* if this field is not initialized */ - Byte = (SK_U8)SK_PHY_MARV_COPPER; - - pAC->GIni.GICopperType = SK_TRUE; - } - - pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV; - - if (pAC->GIni.GICopperType) { - - pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO | - SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS | - SK_LSPEED_CAP_1000MBPS); - - pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO; - - pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | - SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); - } - else { - Byte = (SK_U8)SK_PHY_MARV_FIBER; - } - } -#endif /* YUKON */ - - pAC->GIni.GP[i].PhyType = (int)Byte; - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, - ("PHY type: %d PHY addr: %04x\n", Byte, - pAC->GIni.GP[i].PhyAddr)); - } - - /* get MAC Type & set function pointers dependent on */ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - pAC->GIni.GIMacType = SK_MAC_XMAC; - - pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats; - pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic; - pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter; - pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus; - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - pAC->GIni.GIMacType = SK_MAC_GMAC; - - pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats; - pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic; - pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter; - pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus; - -#ifdef SPECIAL_HANDLING - if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { - /* check HW self test result */ - SK_IN8(IoC, B2_E_3, &Byte); - if (Byte & B2_E3_RES_MASK) { - RetVal = 6; - } - } -#endif - } -#endif /* YUKON */ - - return(RetVal); -} /* SkGeInit1 */ - - -/****************************************************************************** - * - * SkGeInit2() - Level 2 Initialization - * - * Description: - * - start the Blink Source Counter - * - start the Descriptor Poll Timer - * - configure the MAC-Arbiter - * - configure the Packet-Arbiter - * - enable the Tx Arbiters - * - enable the RAM Interface Arbiter - * - * Returns: - * nothing - */ -static void SkGeInit2( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ -#ifdef GENESIS - SK_U32 DWord; -#endif /* GENESIS */ - int i; - - /* start the Descriptor Poll Timer */ - if (pAC->GIni.GIPollTimerVal != 0) { - if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) { - pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG); - } - SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal); - SK_OUT8(IoC, B28_DPT_CTRL, DPT_START); - } - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* start the Blink Source Counter */ - DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; - - SK_OUT32(IoC, B2_BSC_INI, DWord); - SK_OUT8(IoC, B2_BSC_CTRL, BSC_START); - - /* - * Configure the MAC Arbiter and the Packet Arbiter. - * They will be started once and never be stopped. - */ - SkGeInitMacArb(pAC, IoC); - - SkGeInitPktArb(pAC, IoC); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* start Time Stamp Timer */ - SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START); - } -#endif /* YUKON */ - - /* enable the Tx Arbiters */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB); - } - - /* enable the RAM Interface Arbiter */ - SkGeInitRamIface(pAC, IoC); - -} /* SkGeInit2 */ - -/****************************************************************************** - * - * SkGeInit() - Initialize the GE Adapter with the specified level. - * - * Description: - * Level 0: Initialize the Module structures. - * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has - * to be set before calling this level. - * - * o Do a software reset. - * o Clear all reset bits. - * o Verify that the detected hardware is present. - * Return an error if not. - * o Get the hardware configuration - * + Set GIMacsFound with the number of MACs. - * + Store the RAM size in GIRamSize. - * + Save the PCI Revision ID in GIPciHwRev. - * o return an error - * if Number of MACs > SK_MAX_MACS - * - * After returning from Level 0 the adapter - * may be accessed with IO operations. - * - * Level 2: start the Blink Source Counter - * - * Returns: - * 0: success - * 1: Number of MACs exceeds SK_MAX_MACS (after level 1) - * 2: Adapter not present or not accessible - * 3: Illegal initialization level - * 4: Initialization Level 1 Call missing - * 5: Unexpected PHY type detected - * 6: HW self test failed - */ -int SkGeInit( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Level) /* initialization level */ -{ - int RetVal; /* return value */ - SK_U32 DWord; - - RetVal = 0; - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, - ("SkGeInit(Level %d)\n", Level)); - - switch (Level) { - case SK_INIT_DATA: - /* Initialization Level 0 */ - SkGeInit0(pAC, IoC); - pAC->GIni.GILevel = SK_INIT_DATA; - break; - - case SK_INIT_IO: - /* Initialization Level 1 */ - RetVal = SkGeInit1(pAC, IoC); - if (RetVal != 0) { - break; - } - - /* check if the adapter seems to be accessible */ - SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL); - SK_IN32(IoC, B2_IRQM_INI, &DWord); - SK_OUT32(IoC, B2_IRQM_INI, 0L); - - if (DWord != SK_TEST_VAL) { - RetVal = 2; - break; - } - - /* check if the number of GIMacsFound matches SK_MAX_MACS */ - if (pAC->GIni.GIMacsFound > SK_MAX_MACS) { - RetVal = 1; - break; - } - - /* Level 1 successfully passed */ - pAC->GIni.GILevel = SK_INIT_IO; - break; - - case SK_INIT_RUN: - /* Initialization Level 2 */ - if (pAC->GIni.GILevel != SK_INIT_IO) { -#ifndef SK_DIAG - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG); -#endif /* !SK_DIAG */ - RetVal = 4; - break; - } - SkGeInit2(pAC, IoC); - - /* Level 2 successfully passed */ - pAC->GIni.GILevel = SK_INIT_RUN; - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG); - RetVal = 3; - break; - } - - return(RetVal); -} /* SkGeInit */ - - -/****************************************************************************** - * - * SkGeDeInit() - Deinitialize the adapter - * - * Description: - * All ports of the adapter will be stopped if not already done. - * Do a software reset and switch off all LEDs. - * - * Returns: - * nothing - */ -void SkGeDeInit( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC) /* IO context */ -{ - int i; - SK_U16 Word; - -#if (!defined(SK_SLIM) && !defined(VCPU)) - /* ensure I2C is ready */ - SkI2cWaitIrq(pAC, IoC); -#endif - - /* stop all current transfer activity */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - if (pAC->GIni.GP[i].PState != SK_PRT_STOP && - pAC->GIni.GP[i].PState != SK_PRT_RESET) { - - SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST); - } - } - - /* Reset all bits in the PCI STATUS register */ - /* - * Note: PCI Cfg cycles cannot be used, because they are not - * available on some platforms after 'boot time'. - */ - SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); - SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - - /* do the reset, all LEDs are switched off now */ - SK_OUT8(IoC, B0_CTST, CS_RST_SET); - - pAC->GIni.GILevel = SK_INIT_DATA; -} /* SkGeDeInit */ - - -/****************************************************************************** - * - * SkGeInitPort() Initialize the specified port. - * - * Description: - * PRxQSize, PXSQSize, and PXAQSize has to be - * configured for the specified port before calling this function. - * The descriptor rings has to be initialized too. - * - * o (Re)configure queues of the specified port. - * o configure the MAC of the specified port. - * o put ASIC and MAC(s) in operational mode. - * o initialize Rx/Tx and Sync LED - * o initialize RAM Buffers and MAC FIFOs - * - * The port is ready to connect when returning. - * - * Note: - * The MAC's Rx and Tx state machine is still disabled when returning. - * - * Returns: - * 0: success - * 1: Queue size initialization error. The configured values - * for PRxQSize, PXSQSize, or PXAQSize are invalid for one - * or more queues. The specified port was NOT initialized. - * An error log entry was generated. - * 2: The port has to be stopped before it can be initialized again. - */ -int SkGeInitPort( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port to configure */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - if (SkGeCheckQSize(pAC, Port) != 0) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG); - return(1); - } - - if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG); - return(2); - } - - /* configuration ok, initialize the Port now */ - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* initialize Rx, Tx and Link LED */ - /* - * If 1000BT Phy needs LED initialization than swap - * LED and XMAC initialization order - */ - SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); - SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA); - /* The Link LED is initialized by RLMT or Diagnostics itself */ - - SkXmInitMac(pAC, IoC, Port); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - SkGmInitMac(pAC, IoC, Port); - } -#endif /* YUKON */ - - /* do NOT initialize the Link Sync Counter */ - - SkGeInitMacFifo(pAC, IoC, Port); - - SkGeInitRamBufs(pAC, IoC, Port); - - if (pPrt->PXSQSize != 0) { - /* enable Force Sync bit if synchronous queue available */ - SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC); - } - - SkGeInitBmu(pAC, IoC, Port); - - /* mark port as initialized */ - pPrt->PState = SK_PRT_INIT; - - return(0); -} /* SkGeInitPort */ diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c deleted file mode 100644 index fde45083..0000000 --- a/drivers/net/sk98lin/skgemib.c +++ /dev/null @@ -1,1075 +0,0 @@ -/***************************************************************************** - * - * Name: skgemib.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.11 $ - * Date: $Date: 2003/09/15 13:38:12 $ - * Purpose: Private Network Management Interface Management Database - * - ****************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * PRIVATE OID handler function prototypes - */ -PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action, - SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action, - SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int* pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); - -#ifdef SK_POWER_MGMT -PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -#endif /* SK_POWER_MGMT */ - -#ifdef SK_DIAG_SUPPORT -PNMI_STATIC int DiagActions(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, - unsigned int TableIndex, SK_U32 NetIndex); -#endif /* SK_DIAG_SUPPORT */ - - -/* defines *******************************************************************/ -#define ID_TABLE_SIZE ARRAY_SIZE(IdTable) - - -/* global variables **********************************************************/ - -/* - * Table to correlate OID with handler function and index to - * hardware register stored in StatAddress if applicable. - */ -PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = { - {OID_GEN_XMIT_OK, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX}, - {OID_GEN_RCV_OK, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX}, - {OID_GEN_XMIT_ERROR, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, - {OID_GEN_RCV_ERROR, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, - {OID_GEN_RCV_NO_BUFFER, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, - {OID_GEN_DIRECTED_FRAMES_XMIT, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST}, - {OID_GEN_MULTICAST_FRAMES_XMIT, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST}, - {OID_GEN_BROADCAST_FRAMES_XMIT, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST}, - {OID_GEN_DIRECTED_FRAMES_RCV, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST}, - {OID_GEN_MULTICAST_FRAMES_RCV, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST}, - {OID_GEN_BROADCAST_FRAMES_RCV, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST}, - {OID_GEN_RCV_CRC_ERROR, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS}, - {OID_GEN_TRANSMIT_QUEUE_LENGTH, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, - {OID_802_3_PERMANENT_ADDRESS, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, 0}, - {OID_802_3_CURRENT_ADDRESS, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, 0}, - {OID_802_3_RCV_ERROR_ALIGNMENT, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING}, - {OID_802_3_XMIT_ONE_COLLISION, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL}, - {OID_802_3_XMIT_MORE_COLLISIONS, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL}, - {OID_802_3_XMIT_DEFERRED, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL}, - {OID_802_3_XMIT_MAX_COLLISIONS, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL}, - {OID_802_3_RCV_OVERRUN, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW}, - {OID_802_3_XMIT_UNDERRUN, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN}, - {OID_802_3_XMIT_TIMES_CRS_LOST, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER}, - {OID_802_3_XMIT_LATE_COLLISIONS, - 0, - 0, - 0, - SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL}, -#ifdef SK_POWER_MGMT - {OID_PNP_CAPABILITIES, - 0, - 0, - 0, - SK_PNMI_RO, PowerManagement, 0}, - {OID_PNP_SET_POWER, - 0, - 0, - 0, - SK_PNMI_WO, PowerManagement, 0}, - {OID_PNP_QUERY_POWER, - 0, - 0, - 0, - SK_PNMI_RO, PowerManagement, 0}, - {OID_PNP_ADD_WAKE_UP_PATTERN, - 0, - 0, - 0, - SK_PNMI_WO, PowerManagement, 0}, - {OID_PNP_REMOVE_WAKE_UP_PATTERN, - 0, - 0, - 0, - SK_PNMI_WO, PowerManagement, 0}, - {OID_PNP_ENABLE_WAKE_UP, - 0, - 0, - 0, - SK_PNMI_RW, PowerManagement, 0}, -#endif /* SK_POWER_MGMT */ -#ifdef SK_DIAG_SUPPORT - {OID_SKGE_DIAG_MODE, - 0, - 0, - 0, - SK_PNMI_RW, DiagActions, 0}, -#endif /* SK_DIAG_SUPPORT */ - {OID_SKGE_MDB_VERSION, - 1, - 0, - SK_PNMI_MAI_OFF(MgmtDBVersion), - SK_PNMI_RO, General, 0}, - {OID_SKGE_SUPPORTED_LIST, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, - {OID_SKGE_ALL_DATA, - 0, - 0, - 0, - SK_PNMI_RW, OidStruct, 0}, - {OID_SKGE_VPD_FREE_BYTES, - 1, - 0, - SK_PNMI_MAI_OFF(VpdFreeBytes), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_ENTRIES_LIST, - 1, - 0, - SK_PNMI_MAI_OFF(VpdEntriesList), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_ENTRIES_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(VpdEntriesNumber), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_KEY, - SK_PNMI_VPD_ENTRIES, - sizeof(SK_PNMI_VPD), - SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_VALUE, - SK_PNMI_VPD_ENTRIES, - sizeof(SK_PNMI_VPD), - SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_ACCESS, - SK_PNMI_VPD_ENTRIES, - sizeof(SK_PNMI_VPD), - SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess), - SK_PNMI_RO, Vpd, 0}, - {OID_SKGE_VPD_ACTION, - SK_PNMI_VPD_ENTRIES, - sizeof(SK_PNMI_VPD), - SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction), - SK_PNMI_RW, Vpd, 0}, - {OID_SKGE_PORT_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(PortNumber), - SK_PNMI_RO, General, 0}, - {OID_SKGE_DEVICE_TYPE, - 1, - 0, - SK_PNMI_MAI_OFF(DeviceType), - SK_PNMI_RO, General, 0}, - {OID_SKGE_DRIVER_DESCR, - 1, - 0, - SK_PNMI_MAI_OFF(DriverDescr), - SK_PNMI_RO, General, 0}, - {OID_SKGE_DRIVER_VERSION, - 1, - 0, - SK_PNMI_MAI_OFF(DriverVersion), - SK_PNMI_RO, General, 0}, - {OID_SKGE_DRIVER_RELDATE, - 1, - 0, - SK_PNMI_MAI_OFF(DriverReleaseDate), - SK_PNMI_RO, General, 0}, - {OID_SKGE_DRIVER_FILENAME, - 1, - 0, - SK_PNMI_MAI_OFF(DriverFileName), - SK_PNMI_RO, General, 0}, - {OID_SKGE_HW_DESCR, - 1, - 0, - SK_PNMI_MAI_OFF(HwDescr), - SK_PNMI_RO, General, 0}, - {OID_SKGE_HW_VERSION, - 1, - 0, - SK_PNMI_MAI_OFF(HwVersion), - SK_PNMI_RO, General, 0}, - {OID_SKGE_CHIPSET, - 1, - 0, - SK_PNMI_MAI_OFF(Chipset), - SK_PNMI_RO, General, 0}, - {OID_SKGE_CHIPID, - 1, - 0, - SK_PNMI_MAI_OFF(ChipId), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RAMSIZE, - 1, - 0, - SK_PNMI_MAI_OFF(RamSize), - SK_PNMI_RO, General, 0}, - {OID_SKGE_VAUXAVAIL, - 1, - 0, - SK_PNMI_MAI_OFF(VauxAvail), - SK_PNMI_RO, General, 0}, - {OID_SKGE_ACTION, - 1, - 0, - SK_PNMI_MAI_OFF(Action), - SK_PNMI_RW, Perform, 0}, - {OID_SKGE_RESULT, - 1, - 0, - SK_PNMI_MAI_OFF(TestResult), - SK_PNMI_RO, General, 0}, - {OID_SKGE_BUS_TYPE, - 1, - 0, - SK_PNMI_MAI_OFF(BusType), - SK_PNMI_RO, General, 0}, - {OID_SKGE_BUS_SPEED, - 1, - 0, - SK_PNMI_MAI_OFF(BusSpeed), - SK_PNMI_RO, General, 0}, - {OID_SKGE_BUS_WIDTH, - 1, - 0, - SK_PNMI_MAI_OFF(BusWidth), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_SW_QUEUE_LEN, - 1, - 0, - SK_PNMI_MAI_OFF(TxSwQueueLen), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_SW_QUEUE_MAX, - 1, - 0, - SK_PNMI_MAI_OFF(TxSwQueueMax), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_RETRY, - 1, - 0, - SK_PNMI_MAI_OFF(TxRetryCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RX_INTR_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RxIntrCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_INTR_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(TxIntrCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RX_NO_BUF_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RxNoBufCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_NO_BUF_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(TxNoBufCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_USED_DESCR_NO, - 1, - 0, - SK_PNMI_MAI_OFF(TxUsedDescrNo), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RX_DELIVERED_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RxDeliveredCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RX_OCTETS_DELIV_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RxOctetsDeliveredCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RX_HW_ERROR_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RxHwErrorsCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TX_HW_ERROR_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(TxHwErrorsCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_IN_ERRORS_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(InErrorsCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_OUT_ERROR_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(OutErrorsCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_ERR_RECOVERY_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(ErrRecoveryCts), - SK_PNMI_RO, General, 0}, - {OID_SKGE_SYSUPTIME, - 1, - 0, - SK_PNMI_MAI_OFF(SysUpTime), - SK_PNMI_RO, General, 0}, - {OID_SKGE_SENSOR_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(SensorNumber), - SK_PNMI_RO, General, 0}, - {OID_SKGE_SENSOR_INDEX, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_DESCR, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_TYPE, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_VALUE, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_WAR_THRES_LOW, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_WAR_THRES_UPP, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_ERR_THRES_LOW, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_ERR_THRES_UPP, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_STATUS, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_WAR_CTS, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_ERR_CTS, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_WAR_TIME, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_SENSOR_ERR_TIME, - SK_PNMI_SENSOR_ENTRIES, - sizeof(SK_PNMI_SENSOR), - SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp), - SK_PNMI_RO, SensorStat, 0}, - {OID_SKGE_CHKSM_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(ChecksumNumber), - SK_PNMI_RO, General, 0}, - {OID_SKGE_CHKSM_RX_OK_CTS, - SKCS_NUM_PROTOCOLS, - sizeof(SK_PNMI_CHECKSUM), - SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts), - SK_PNMI_RO, CsumStat, 0}, - {OID_SKGE_CHKSM_RX_UNABLE_CTS, - SKCS_NUM_PROTOCOLS, - sizeof(SK_PNMI_CHECKSUM), - SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts), - SK_PNMI_RO, CsumStat, 0}, - {OID_SKGE_CHKSM_RX_ERR_CTS, - SKCS_NUM_PROTOCOLS, - sizeof(SK_PNMI_CHECKSUM), - SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts), - SK_PNMI_RO, CsumStat, 0}, - {OID_SKGE_CHKSM_TX_OK_CTS, - SKCS_NUM_PROTOCOLS, - sizeof(SK_PNMI_CHECKSUM), - SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts), - SK_PNMI_RO, CsumStat, 0}, - {OID_SKGE_CHKSM_TX_UNABLE_CTS, - SKCS_NUM_PROTOCOLS, - sizeof(SK_PNMI_CHECKSUM), - SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts), - SK_PNMI_RO, CsumStat, 0}, - {OID_SKGE_STAT_TX, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX}, - {OID_SKGE_STAT_TX_OCTETS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET}, - {OID_SKGE_STAT_TX_BROADCAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST}, - {OID_SKGE_STAT_TX_MULTICAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST}, - {OID_SKGE_STAT_TX_UNICAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST}, - {OID_SKGE_STAT_TX_LONGFRAMES, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES}, - {OID_SKGE_STAT_TX_BURST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST}, - {OID_SKGE_STAT_TX_PFLOWC, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC}, - {OID_SKGE_STAT_TX_FLOWC, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC}, - {OID_SKGE_STAT_TX_SINGLE_COL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL}, - {OID_SKGE_STAT_TX_MULTI_COL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL}, - {OID_SKGE_STAT_TX_EXCESS_COL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL}, - {OID_SKGE_STAT_TX_LATE_COL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL}, - {OID_SKGE_STAT_TX_DEFFERAL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL}, - {OID_SKGE_STAT_TX_EXCESS_DEF, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF}, - {OID_SKGE_STAT_TX_UNDERRUN, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN}, - {OID_SKGE_STAT_TX_CARRIER, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER}, -/* {OID_SKGE_STAT_TX_UTIL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization), - SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ - {OID_SKGE_STAT_TX_64, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64}, - {OID_SKGE_STAT_TX_127, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127}, - {OID_SKGE_STAT_TX_255, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255}, - {OID_SKGE_STAT_TX_511, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511}, - {OID_SKGE_STAT_TX_1023, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023}, - {OID_SKGE_STAT_TX_MAX, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX}, - {OID_SKGE_STAT_TX_SYNC, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC}, - {OID_SKGE_STAT_TX_SYNC_OCTETS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET}, - {OID_SKGE_STAT_RX, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX}, - {OID_SKGE_STAT_RX_OCTETS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET}, - {OID_SKGE_STAT_RX_BROADCAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST}, - {OID_SKGE_STAT_RX_MULTICAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST}, - {OID_SKGE_STAT_RX_UNICAST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST}, - {OID_SKGE_STAT_RX_LONGFRAMES, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES}, - {OID_SKGE_STAT_RX_PFLOWC, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC}, - {OID_SKGE_STAT_RX_FLOWC, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC}, - {OID_SKGE_STAT_RX_PFLOWC_ERR, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR}, - {OID_SKGE_STAT_RX_FLOWC_UNKWN, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN}, - {OID_SKGE_STAT_RX_BURST, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST}, - {OID_SKGE_STAT_RX_MISSED, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED}, - {OID_SKGE_STAT_RX_FRAMING, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING}, - {OID_SKGE_STAT_RX_OVERFLOW, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW}, - {OID_SKGE_STAT_RX_JABBER, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER}, - {OID_SKGE_STAT_RX_CARRIER, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER}, - {OID_SKGE_STAT_RX_IR_LENGTH, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH}, - {OID_SKGE_STAT_RX_SYMBOL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL}, - {OID_SKGE_STAT_RX_SHORTS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS}, - {OID_SKGE_STAT_RX_RUNT, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT}, - {OID_SKGE_STAT_RX_CEXT, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT}, - {OID_SKGE_STAT_RX_TOO_LONG, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG}, - {OID_SKGE_STAT_RX_FCS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS}, -/* {OID_SKGE_STAT_RX_UTIL, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization), - SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ - {OID_SKGE_STAT_RX_64, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64}, - {OID_SKGE_STAT_RX_127, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127}, - {OID_SKGE_STAT_RX_255, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255}, - {OID_SKGE_STAT_RX_511, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511}, - {OID_SKGE_STAT_RX_1023, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023}, - {OID_SKGE_STAT_RX_MAX, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_STAT), - SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts), - SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX}, - {OID_SKGE_PHYS_CUR_ADDR, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr), - SK_PNMI_RW, Addr, 0}, - {OID_SKGE_PHYS_FAC_ADDR, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr), - SK_PNMI_RO, Addr, 0}, - {OID_SKGE_PMD, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_CONNECTOR, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_PHY_TYPE, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_LINK_CAP, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_LINK_MODE, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode), - SK_PNMI_RW, MacPrivateConf, 0}, - {OID_SKGE_LINK_MODE_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_LINK_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_FLOWCTRL_CAP, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_FLOWCTRL_MODE, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode), - SK_PNMI_RW, MacPrivateConf, 0}, - {OID_SKGE_FLOWCTRL_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_PHY_OPERATION_CAP, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_PHY_OPERATION_MODE, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode), - SK_PNMI_RW, MacPrivateConf, 0}, - {OID_SKGE_PHY_OPERATION_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_SPEED_CAP, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_SPEED_MODE, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode), - SK_PNMI_RW, MacPrivateConf, 0}, - {OID_SKGE_SPEED_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_CONF), - SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus), - SK_PNMI_RO, MacPrivateConf, 0}, - {OID_SKGE_TRAP, - 1, - 0, - SK_PNMI_MAI_OFF(Trap), - SK_PNMI_RO, General, 0}, - {OID_SKGE_TRAP_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(TrapNumber), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RLMT_MODE, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtMode), - SK_PNMI_RW, Rlmt, 0}, - {OID_SKGE_RLMT_PORT_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtPortNumber), - SK_PNMI_RO, Rlmt, 0}, - {OID_SKGE_RLMT_PORT_ACTIVE, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtPortActive), - SK_PNMI_RO, Rlmt, 0}, - {OID_SKGE_RLMT_PORT_PREFERRED, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtPortPreferred), - SK_PNMI_RW, Rlmt, 0}, - {OID_SKGE_RLMT_CHANGE_CTS, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtChangeCts), - SK_PNMI_RO, Rlmt, 0}, - {OID_SKGE_RLMT_CHANGE_TIME, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtChangeTime), - SK_PNMI_RO, Rlmt, 0}, - {OID_SKGE_RLMT_CHANGE_ESTIM, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtChangeEstimate), - SK_PNMI_RO, Rlmt, 0}, - {OID_SKGE_RLMT_CHANGE_THRES, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtChangeThreshold), - SK_PNMI_RW, Rlmt, 0}, - {OID_SKGE_RLMT_PORT_INDEX, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_STATUS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_TX_HELLO_CTS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_RX_HELLO_CTS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_TX_SP_REQ_CTS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_RX_SP_CTS, - SK_PNMI_MAC_ENTRIES, - sizeof(SK_PNMI_RLMT), - SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts), - SK_PNMI_RO, RlmtStat, 0}, - {OID_SKGE_RLMT_MONITOR_NUMBER, - 1, - 0, - SK_PNMI_MAI_OFF(RlmtMonitorNumber), - SK_PNMI_RO, General, 0}, - {OID_SKGE_RLMT_MONITOR_INDEX, - SK_PNMI_MONITOR_ENTRIES, - sizeof(SK_PNMI_RLMT_MONITOR), - SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex), - SK_PNMI_RO, Monitor, 0}, - {OID_SKGE_RLMT_MONITOR_ADDR, - SK_PNMI_MONITOR_ENTRIES, - sizeof(SK_PNMI_RLMT_MONITOR), - SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr), - SK_PNMI_RO, Monitor, 0}, - {OID_SKGE_RLMT_MONITOR_ERRS, - SK_PNMI_MONITOR_ENTRIES, - sizeof(SK_PNMI_RLMT_MONITOR), - SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts), - SK_PNMI_RO, Monitor, 0}, - {OID_SKGE_RLMT_MONITOR_TIMESTAMP, - SK_PNMI_MONITOR_ENTRIES, - sizeof(SK_PNMI_RLMT_MONITOR), - SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp), - SK_PNMI_RO, Monitor, 0}, - {OID_SKGE_RLMT_MONITOR_ADMIN, - SK_PNMI_MONITOR_ENTRIES, - sizeof(SK_PNMI_RLMT_MONITOR), - SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin), - SK_PNMI_RW, Monitor, 0}, - {OID_SKGE_MTU, - 1, - 0, - SK_PNMI_MAI_OFF(MtuSize), - SK_PNMI_RW, MacPrivateConf, 0}, - {OID_SKGE_VCT_GET, - 0, - 0, - 0, - SK_PNMI_RO, Vct, 0}, - {OID_SKGE_VCT_SET, - 0, - 0, - 0, - SK_PNMI_WO, Vct, 0}, - {OID_SKGE_VCT_STATUS, - 0, - 0, - 0, - SK_PNMI_RO, Vct, 0}, - {OID_SKGE_BOARDLEVEL, - 0, - 0, - 0, - SK_PNMI_RO, General, 0}, -}; - diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c deleted file mode 100644 index 876bb21..0000000 --- a/drivers/net/sk98lin/skgepnmi.c +++ /dev/null @@ -1,8198 +0,0 @@ -/***************************************************************************** - * - * Name: skgepnmi.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.111 $ - * Date: $Date: 2003/09/15 13:35:35 $ - * Purpose: Private Network Management Interface - * - ****************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - - -#ifndef _lint -static const char SysKonnectFileId[] = - "@(#) $Id: skgepnmi.c,v 1.111 2003/09/15 13:35:35 tschilli Exp $ (C) Marvell."; -#endif /* !_lint */ - -#include "h/skdrv1st.h" -#include "h/sktypes.h" -#include "h/xmac_ii.h" -#include "h/skdebug.h" -#include "h/skqueue.h" -#include "h/skgepnmi.h" -#include "h/skgesirq.h" -#include "h/skcsum.h" -#include "h/skvpd.h" -#include "h/skgehw.h" -#include "h/skgeinit.h" -#include "h/skdrv2nd.h" -#include "h/skgepnm2.h" -#ifdef SK_POWER_MGMT -#include "h/skgepmgt.h" -#endif -/* defines *******************************************************************/ - -#ifndef DEBUG -#define PNMI_STATIC static -#else /* DEBUG */ -#define PNMI_STATIC -#endif /* DEBUG */ - -/* - * Public Function prototypes - */ -int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level); -int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, - unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); -int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, - unsigned int *pLen, SK_U32 NetIndex); -int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, - unsigned int *pLen, SK_U32 NetIndex); -int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, - unsigned int *pLen, SK_U32 NetIndex); -int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param); -int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, - unsigned int * pLen, SK_U32 NetIndex); - - -/* - * Private Function prototypes - */ - -PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int - PhysPortIndex); -PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int - PhysPortIndex); -PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac); -PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf); -PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC, - unsigned int PhysPortIndex, unsigned int StatIndex); -PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex, - unsigned int StatIndex, SK_U32 NetIndex); -PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size); -PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen, - unsigned int *pEntries); -PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr, - unsigned int KeyArrLen, unsigned int *pKeyNo); -PNMI_STATIC int LookupId(SK_U32 Id); -PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac, - unsigned int LastMac); -PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf, - unsigned int *pLen, SK_U32 NetIndex); -PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, - char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); -PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac); -PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId, - unsigned int PortIndex); -PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId, - unsigned int SensorIndex); -PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId); -PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); -PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); -PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC); -PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf); -PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf, - unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex); -PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32); - -/* - * Table to correlate OID with handler function and index to - * hardware register stored in StatAddress if applicable. - */ -#include "skgemib.c" - -/* global variables **********************************************************/ - -/* - * Overflow status register bit table and corresponding counter - * dependent on MAC type - the number relates to the size of overflow - * mask returned by the pFnMacOverflow function - */ -PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = { -/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST}, -/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST}, -/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC}, -/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST}, -/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW}, -/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH}, -/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64}, -/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127}, -/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255}, -/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511}, -/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023}, -/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX}, -/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES}, -/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED}, -/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL}, -/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL}, -/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL}, -/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL}, -/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL}, -/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN}, -/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED}, -/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED}, -/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED}, -/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED}, -/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED}, -/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED}, -/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, -/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST}, -/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST}, -/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC}, -/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST}, -/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS}, -/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED}, -/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW}, -/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH}, -/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW}, -/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH}, -/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE}, -/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT}, -/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64}, -/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127}, -/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255}, -/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511}, -/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023}, -/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX}, -/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES}, -/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG}, -/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER}, -/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED}, -/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW}, -/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED}, -/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED}, -/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED}, -/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED}, -/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED}, -/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED}, -/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED}, -/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED}, -/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED} -}; - -/* - * Table for hardware register saving on resets and port switches - */ -PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = { - /* SK_PNMI_HTX */ - {{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_OCTETHIGH */ - {{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}}, - /* SK_PNMI_HTX_OCTETLOW */ - {{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}}, - /* SK_PNMI_HTX_BROADCAST */ - {{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}}, - /* SK_PNMI_HTX_MULTICAST */ - {{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}}, - /* SK_PNMI_HTX_UNICAST */ - {{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}}, - /* SK_PNMI_HTX_BURST */ - {{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_PMACC */ - {{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}}, - /* SK_PNMI_HTX_MACC */ - {{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_COL */ - {{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}}, - /* SK_PNMI_HTX_SINGLE_COL */ - {{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}}, - /* SK_PNMI_HTX_MULTI_COL */ - {{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}}, - /* SK_PNMI_HTX_EXCESS_COL */ - {{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}}, - /* SK_PNMI_HTX_LATE_COL */ - {{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}}, - /* SK_PNMI_HTX_DEFFERAL */ - {{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_EXCESS_DEF */ - {{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_UNDERRUN */ - {{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}}, - /* SK_PNMI_HTX_CARRIER */ - {{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_UTILUNDER */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_UTILOVER */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_64 */ - {{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}}, - /* SK_PNMI_HTX_127 */ - {{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}}, - /* SK_PNMI_HTX_255 */ - {{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}}, - /* SK_PNMI_HTX_511 */ - {{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}}, - /* SK_PNMI_HTX_1023 */ - {{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}}, - /* SK_PNMI_HTX_MAX */ - {{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}}, - /* SK_PNMI_HTX_LONGFRAMES */ - {{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}}, - /* SK_PNMI_HTX_SYNC */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_SYNC_OCTET */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HTX_RESERVED */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX */ - {{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_OCTETHIGH */ - {{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}}, - /* SK_PNMI_HRX_OCTETLOW */ - {{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}}, - /* SK_PNMI_HRX_BADOCTETHIGH */ - {{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}}, - /* SK_PNMI_HRX_BADOCTETLOW */ - {{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}}, - /* SK_PNMI_HRX_BROADCAST */ - {{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}}, - /* SK_PNMI_HRX_MULTICAST */ - {{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}}, - /* SK_PNMI_HRX_UNICAST */ - {{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}}, - /* SK_PNMI_HRX_PMACC */ - {{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}}, - /* SK_PNMI_HRX_MACC */ - {{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_PMACC_ERR */ - {{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_MACC_UNKWN */ - {{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_BURST */ - {{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_MISSED */ - {{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_FRAMING */ - {{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_UNDERSIZE */ - {{0, SK_FALSE}, {GM_RXF_SHT, SK_TRUE}}, - /* SK_PNMI_HRX_OVERFLOW */ - {{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}}, - /* SK_PNMI_HRX_JABBER */ - {{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}}, - /* SK_PNMI_HRX_CARRIER */ - {{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_IRLENGTH */ - {{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_SYMBOL */ - {{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_SHORTS */ - {{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_RUNT */ - {{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}}, - /* SK_PNMI_HRX_TOO_LONG */ - {{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}}, - /* SK_PNMI_HRX_FCS */ - {{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}}, - /* SK_PNMI_HRX_CEXT */ - {{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_UTILUNDER */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_UTILOVER */ - {{0, SK_FALSE}, {0, SK_FALSE}}, - /* SK_PNMI_HRX_64 */ - {{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}}, - /* SK_PNMI_HRX_127 */ - {{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}}, - /* SK_PNMI_HRX_255 */ - {{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}}, - /* SK_PNMI_HRX_511 */ - {{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}}, - /* SK_PNMI_HRX_1023 */ - {{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}}, - /* SK_PNMI_HRX_MAX */ - {{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}}, - /* SK_PNMI_HRX_LONGFRAMES */ - {{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}}, - /* SK_PNMI_HRX_RESERVED */ - {{0, SK_FALSE}, {0, SK_FALSE}} -}; - - -/***************************************************************************** - * - * Public functions - * - */ - -/***************************************************************************** - * - * SkPnmiInit - Init function of PNMI - * - * Description: - * SK_INIT_DATA: Initialises the data structures - * SK_INIT_IO: Resets the XMAC statistics, determines the device and - * connector type. - * SK_INIT_RUN: Starts a timer event for port switch per hour - * calculation. - * - * Returns: - * Always 0 - */ -int SkPnmiInit( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Level) /* Initialization level */ -{ - unsigned int PortMax; /* Number of ports */ - unsigned int PortIndex; /* Current port index in loop */ - SK_U16 Val16; /* Multiple purpose 16 bit variable */ - SK_U8 Val8; /* Mulitple purpose 8 bit variable */ - SK_EVPARA EventParam; /* Event struct for timer event */ - SK_PNMI_VCT *pVctBackupData; - - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiInit: Called, level=%d\n", Level)); - - switch (Level) { - - case SK_INIT_DATA: - SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi)); - pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN; - pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); - pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES; - for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) { - - pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE; - pAC->Pnmi.DualNetActiveFlag = SK_FALSE; - } - -#ifdef SK_PNMI_CHECK - if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG); - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, - ("CounterOffset struct size (%d) differs from " - "SK_PNMI_MAX_IDX (%d)\n", - SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX)); - } - -#endif /* SK_PNMI_CHECK */ - break; - - case SK_INIT_IO: - /* - * Reset MAC counters - */ - PortMax = pAC->GIni.GIMacsFound; - - for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { - - pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex); - } - - /* Initialize DSP variables for Vct() to 0xff => Never written! */ - for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { - pAC->GIni.GP[PortIndex].PCableLen = 0xff; - pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex]; - pVctBackupData->PCableLen = 0xff; - } - - /* - * Get pci bus speed - */ - SK_IN16(IoC, B0_CTST, &Val16); - if ((Val16 & CS_BUS_CLOCK) == 0) { - - pAC->Pnmi.PciBusSpeed = 33; - } - else { - pAC->Pnmi.PciBusSpeed = 66; - } - - /* - * Get pci bus width - */ - SK_IN16(IoC, B0_CTST, &Val16); - if ((Val16 & CS_BUS_SLOT_SZ) == 0) { - - pAC->Pnmi.PciBusWidth = 32; - } - else { - pAC->Pnmi.PciBusWidth = 64; - } - - /* - * Get chipset - */ - switch (pAC->GIni.GIChipId) { - case CHIP_ID_GENESIS: - pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC; - break; - - case CHIP_ID_YUKON: - pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON; - break; - - default: - break; - } - - /* - * Get PMD and DeviceType - */ - SK_IN8(IoC, B2_PMD_TYP, &Val8); - switch (Val8) { - case 'S': - pAC->Pnmi.PMD = 3; - if (pAC->GIni.GIMacsFound > 1) { - - pAC->Pnmi.DeviceType = 0x00020002; - } - else { - pAC->Pnmi.DeviceType = 0x00020001; - } - break; - - case 'L': - pAC->Pnmi.PMD = 2; - if (pAC->GIni.GIMacsFound > 1) { - - pAC->Pnmi.DeviceType = 0x00020004; - } - else { - pAC->Pnmi.DeviceType = 0x00020003; - } - break; - - case 'C': - pAC->Pnmi.PMD = 4; - if (pAC->GIni.GIMacsFound > 1) { - - pAC->Pnmi.DeviceType = 0x00020006; - } - else { - pAC->Pnmi.DeviceType = 0x00020005; - } - break; - - case 'T': - pAC->Pnmi.PMD = 5; - if (pAC->GIni.GIMacsFound > 1) { - - pAC->Pnmi.DeviceType = 0x00020008; - } - else { - pAC->Pnmi.DeviceType = 0x00020007; - } - break; - - default : - pAC->Pnmi.PMD = 1; - pAC->Pnmi.DeviceType = 0; - break; - } - - /* - * Get connector - */ - SK_IN8(IoC, B2_CONN_TYP, &Val8); - switch (Val8) { - case 'C': - pAC->Pnmi.Connector = 2; - break; - - case 'D': - pAC->Pnmi.Connector = 3; - break; - - case 'F': - pAC->Pnmi.Connector = 4; - break; - - case 'J': - pAC->Pnmi.Connector = 5; - break; - - case 'V': - pAC->Pnmi.Connector = 6; - break; - - default: - pAC->Pnmi.Connector = 1; - break; - } - break; - - case SK_INIT_RUN: - /* - * Start timer for RLMT change counter - */ - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, - 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, - EventParam); - break; - - default: - break; /* Nothing todo */ - } - - return (0); -} - -/***************************************************************************** - * - * SkPnmiGetVar - Retrieves the value of a single OID - * - * Description: - * Calls a general sub-function for all this stuff. If the instance - * -1 is passed, the values of all instances are returned in an - * array of values. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed - * SK_PNMI_ERR_GENERAL A general severe internal error occured - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take - * the data. - * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -static int SkPnmiGetVar( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 Id, /* Object ID that is to be processed */ -void *pBuf, /* Buffer to which the management data will be copied */ -unsigned int *pLen, /* On call: buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", - Id, *pLen, Instance, NetIndex)); - - return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen, - Instance, NetIndex)); -} - -/***************************************************************************** - * - * SkPnmiPreSetVar - Presets the value of a single OID - * - * Description: - * Calls a general sub-function for all this stuff. The preset does - * the same as a set, but returns just before finally setting the - * new value. This is useful to check if a set might be successfull. - * If the instance -1 is passed, an array of values is supposed and - * all instances of the OID will be set. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -static int SkPnmiPreSetVar( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 Id, /* Object ID that is to be processed */ -void *pBuf, /* Buffer to which the management data will be copied */ -unsigned int *pLen, /* Total length of management data */ -SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", - Id, *pLen, Instance, NetIndex)); - - - return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen, - Instance, NetIndex)); -} - -/***************************************************************************** - * - * SkPnmiSetVar - Sets the value of a single OID - * - * Description: - * Calls a general sub-function for all this stuff. The preset does - * the same as a set, but returns just before finally setting the - * new value. This is useful to check if a set might be successfull. - * If the instance -1 is passed, an array of values is supposed and - * all instances of the OID will be set. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -int SkPnmiSetVar( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 Id, /* Object ID that is to be processed */ -void *pBuf, /* Buffer to which the management data will be copied */ -unsigned int *pLen, /* Total length of management data */ -SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", - Id, *pLen, Instance, NetIndex)); - - return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen, - Instance, NetIndex)); -} - -/***************************************************************************** - * - * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA - * - * Description: - * Runs through the IdTable, queries the single OIDs and stores the - * returned data into the management database structure - * SK_PNMI_STRUCT_DATA. The offset of the OID in the structure - * is stored in the IdTable. The return value of the function will also - * be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the - * minimum size of SK_PNMI_MIN_STRUCT_SIZE. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed - * SK_PNMI_ERR_GENERAL A general severe internal error occured - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take - * the data. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist - */ -int SkPnmiGetStruct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -void *pBuf, /* Buffer to which the management data will be copied. */ -unsigned int *pLen, /* Length of buffer */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - unsigned int TableIndex; - unsigned int DstOffset; - unsigned int InstanceNo; - unsigned int InstanceCnt; - SK_U32 Instance; - unsigned int TmpLen; - char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; - - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n", - *pLen, NetIndex)); - - if (*pLen < SK_PNMI_STRUCT_SIZE) { - - if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { - - SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, - (SK_U32)(-1)); - } - - *pLen = SK_PNMI_STRUCT_SIZE; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Check NetIndex - */ - if (NetIndex >= pAC->Rlmt.NumNets) { - return (SK_PNMI_ERR_UNKNOWN_NET); - } - - /* Update statistic */ - SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call"); - - if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) != - SK_PNMI_ERR_OK) { - - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - - if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { - - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - - if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { - - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - - /* - * Increment semaphores to indicate that an update was - * already done - */ - pAC->Pnmi.MacUpdatedFlag ++; - pAC->Pnmi.RlmtUpdatedFlag ++; - pAC->Pnmi.SirqUpdatedFlag ++; - - /* Get vpd keys for instance calculation */ - Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen); - if (Ret != SK_PNMI_ERR_OK) { - - pAC->Pnmi.MacUpdatedFlag --; - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (SK_PNMI_ERR_GENERAL); - } - - /* Retrieve values */ - SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE); - for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { - - InstanceNo = IdTable[TableIndex].InstanceNo; - for (InstanceCnt = 1; InstanceCnt <= InstanceNo; - InstanceCnt ++) { - - DstOffset = IdTable[TableIndex].Offset + - (InstanceCnt - 1) * - IdTable[TableIndex].StructSize; - - /* - * For the VPD the instance is not an index number - * but the key itself. Determin with the instance - * counter the VPD key to be used. - */ - if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY || - IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE || - IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS || - IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) { - - SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4); - } - else { - Instance = (SK_U32)InstanceCnt; - } - - TmpLen = *pLen - DstOffset; - Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET, - IdTable[TableIndex].Id, (char *)pBuf + - DstOffset, &TmpLen, Instance, TableIndex, NetIndex); - - /* - * An unknown instance error means that we reached - * the last instance of that variable. Proceed with - * the next OID in the table and ignore the return - * code. - */ - if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { - - break; - } - - if (Ret != SK_PNMI_ERR_OK) { - - pAC->Pnmi.MacUpdatedFlag --; - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); - SK_PNMI_SET_STAT(pBuf, Ret, DstOffset); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - } - } - - pAC->Pnmi.MacUpdatedFlag --; - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - *pLen = SK_PNMI_STRUCT_SIZE; - SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); - SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA - * - * Description: - * Calls a general sub-function for all this set stuff. The preset does - * the same as a set, but returns just before finally setting the - * new value. This is useful to check if a set might be successfull. - * The sub-function runs through the IdTable, checks which OIDs are able - * to set, and calls the handler function of the OID to perform the - * preset. The return value of the function will also be stored in - * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of - * SK_PNMI_MIN_STRUCT_SIZE. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - */ -int SkPnmiPreSetStruct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -void *pBuf, /* Buffer which contains the data to be set */ -unsigned int *pLen, /* Length of buffer */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n", - *pLen, NetIndex)); - - return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, - pLen, NetIndex)); -} - -/***************************************************************************** - * - * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA - * - * Description: - * Calls a general sub-function for all this set stuff. The return value - * of the function will also be stored in SK_PNMI_STRUCT_DATA if the - * passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE. - * The sub-function runs through the IdTable, checks which OIDs are able - * to set, and calls the handler function of the OID to perform the - * set. The return value of the function will also be stored in - * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of - * SK_PNMI_MIN_STRUCT_SIZE. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - */ -int SkPnmiSetStruct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -void *pBuf, /* Buffer which contains the data to be set */ -unsigned int *pLen, /* Length of buffer */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n", - *pLen, NetIndex)); - - return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, - pLen, NetIndex)); -} - -/***************************************************************************** - * - * SkPnmiEvent - Event handler - * - * Description: - * Handles the following events: - * SK_PNMI_EVT_SIRQ_OVERFLOW When a hardware counter overflows an - * interrupt will be generated which is - * first handled by SIRQ which generates a - * this event. The event increments the - * upper 32 bit of the 64 bit counter. - * SK_PNMI_EVT_SEN_XXX The event is generated by the I2C module - * when a sensor reports a warning or - * error. The event will store a trap - * message in the trap buffer. - * SK_PNMI_EVT_CHG_EST_TIMER The timer event was initiated by this - * module and is used to calculate the - * port switches per hour. - * SK_PNMI_EVT_CLEAR_COUNTER The event clears all counters and - * timestamps. - * SK_PNMI_EVT_XMAC_RESET The event is generated by the driver - * before a hard reset of the XMAC is - * performed. All counters will be saved - * and added to the hardware counter - * values after reset to grant continuous - * counter values. - * SK_PNMI_EVT_RLMT_PORT_UP Generated by RLMT to notify that a port - * went logically up. A trap message will - * be stored to the trap buffer. - * SK_PNMI_EVT_RLMT_PORT_DOWN Generated by RLMT to notify that a port - * went logically down. A trap message will - * be stored to the trap buffer. - * SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two - * spanning tree root bridges were - * detected. A trap message will be stored - * to the trap buffer. - * SK_PNMI_EVT_RLMT_ACTIVE_DOWN Notifies PNMI that an active port went - * down. PNMI will not further add the - * statistic values to the virtual port. - * SK_PNMI_EVT_RLMT_ACTIVE_UP Notifies PNMI that a port went up and - * is now an active port. PNMI will now - * add the statistic data of this port to - * the virtual port. - * SK_PNMI_EVT_RLMT_SET_NETS Notifies PNMI about the net mode. The first parameter - * contains the number of nets. 1 means single net, 2 means - * dual net. The second parameter is -1 - * - * Returns: - * Always 0 - */ -int SkPnmiEvent( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 Event, /* Event-Id */ -SK_EVPARA Param) /* Event dependent parameter */ -{ - unsigned int PhysPortIndex; - unsigned int MaxNetNumber; - int CounterIndex; - int Ret; - SK_U16 MacStatus; - SK_U64 OverflowStatus; - SK_U64 Mask; - int MacType; - SK_U64 Value; - SK_U32 Val32; - SK_U16 Register; - SK_EVPARA EventParam; - SK_U64 NewestValue; - SK_U64 OldestValue; - SK_U64 Delta; - SK_PNMI_ESTIMATE *pEst; - SK_U32 NetIndex; - SK_GEPORT *pPrt; - SK_PNMI_VCT *pVctBackupData; - SK_U32 RetCode; - int i; - SK_U32 CableLength; - - -#ifdef DEBUG - if (Event != SK_PNMI_EVT_XMAC_RESET) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n", - (unsigned int)Event, (unsigned int)Param.Para64)); - } -#endif /* DEBUG */ - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call"); - - MacType = pAC->GIni.GIMacType; - - switch (Event) { - - case SK_PNMI_EVT_SIRQ_OVERFLOW: - PhysPortIndex = (int)Param.Para32[0]; - MacStatus = (SK_U16)Param.Para32[1]; -#ifdef DEBUG - if (PhysPortIndex >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter" - " wrong, PhysPortIndex=0x%x\n", - PhysPortIndex)); - return (0); - } -#endif /* DEBUG */ - OverflowStatus = 0; - - /* - * Check which source caused an overflow interrupt. - */ - if ((pAC->GIni.GIFunc.pFnMacOverflow(pAC, IoC, PhysPortIndex, - MacStatus, &OverflowStatus) != 0) || - (OverflowStatus == 0)) { - - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); - } - - /* - * Check the overflow status register and increment - * the upper dword of corresponding counter. - */ - for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8; - CounterIndex ++) { - - Mask = (SK_U64)1 << CounterIndex; - if ((OverflowStatus & Mask) == 0) { - - continue; - } - - switch (StatOvrflwBit[CounterIndex][MacType]) { - - case SK_PNMI_HTX_UTILUNDER: - case SK_PNMI_HTX_UTILOVER: - if (MacType == SK_MAC_XMAC) { - XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, &Register); - Register |= XM_TX_SAM_LINE; - XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, Register); - } - break; - - case SK_PNMI_HRX_UTILUNDER: - case SK_PNMI_HRX_UTILOVER: - if (MacType == SK_MAC_XMAC) { - XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, &Register); - Register |= XM_RX_SAM_LINE; - XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, Register); - } - break; - - case SK_PNMI_HTX_OCTETHIGH: - case SK_PNMI_HTX_OCTETLOW: - case SK_PNMI_HTX_RESERVED: - case SK_PNMI_HRX_OCTETHIGH: - case SK_PNMI_HRX_OCTETLOW: - case SK_PNMI_HRX_IRLENGTH: - case SK_PNMI_HRX_RESERVED: - - /* - * the following counters aren't be handled (id > 63) - */ - case SK_PNMI_HTX_SYNC: - case SK_PNMI_HTX_SYNC_OCTET: - break; - - case SK_PNMI_HRX_LONGFRAMES: - if (MacType == SK_MAC_GMAC) { - pAC->Pnmi.Port[PhysPortIndex]. - CounterHigh[CounterIndex] ++; - } - break; - - default: - pAC->Pnmi.Port[PhysPortIndex]. - CounterHigh[CounterIndex] ++; - } - } - break; - - case SK_PNMI_EVT_SEN_WAR_LOW: -#ifdef DEBUG - if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n", - (unsigned int)Param.Para64)); - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate - * an event for user space applications with the - * SK_DRIVER_SENDEVENT macro. - */ - QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW, - (unsigned int)Param.Para64); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - break; - - case SK_PNMI_EVT_SEN_WAR_UPP: -#ifdef DEBUG - if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n", - (unsigned int)Param.Para64)); - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate - * an event for user space applications with the - * SK_DRIVER_SENDEVENT macro. - */ - QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP, - (unsigned int)Param.Para64); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - break; - - case SK_PNMI_EVT_SEN_ERR_LOW: -#ifdef DEBUG - if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n", - (unsigned int)Param.Para64)); - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate - * an event for user space applications with the - * SK_DRIVER_SENDEVENT macro. - */ - QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW, - (unsigned int)Param.Para64); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - break; - - case SK_PNMI_EVT_SEN_ERR_UPP: -#ifdef DEBUG - if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n", - (unsigned int)Param.Para64)); - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate - * an event for user space applications with the - * SK_DRIVER_SENDEVENT macro. - */ - QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP, - (unsigned int)Param.Para64); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - break; - - case SK_PNMI_EVT_CHG_EST_TIMER: - /* - * Calculate port switch average on a per hour basis - * Time interval for check : 28125 ms - * Number of values for average : 8 - * - * Be careful in changing these values, on change check - * - typedef of SK_PNMI_ESTIMATE (Size of EstValue - * array one less than value number) - * - Timer initialization SkTimerStart() in SkPnmiInit - * - Delta value below must be multiplicated with - * power of 2 - * - */ - pEst = &pAC->Pnmi.RlmtChangeEstimate; - CounterIndex = pEst->EstValueIndex + 1; - if (CounterIndex == 7) { - - CounterIndex = 0; - } - pEst->EstValueIndex = CounterIndex; - - NewestValue = pAC->Pnmi.RlmtChangeCts; - OldestValue = pEst->EstValue[CounterIndex]; - pEst->EstValue[CounterIndex] = NewestValue; - - /* - * Calculate average. Delta stores the number of - * port switches per 28125 * 8 = 225000 ms - */ - if (NewestValue >= OldestValue) { - - Delta = NewestValue - OldestValue; - } - else { - /* Overflow situation */ - Delta = (SK_U64)(0 - OldestValue) + NewestValue; - } - - /* - * Extrapolate delta to port switches per hour. - * Estimate = Delta * (3600000 / 225000) - * = Delta * 16 - * = Delta << 4 - */ - pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4; - - /* - * Check if threshold is exceeded. If the threshold is - * permanently exceeded every 28125 ms an event will be - * generated to remind the user of this condition. - */ - if ((pAC->Pnmi.RlmtChangeThreshold != 0) && - (pAC->Pnmi.RlmtChangeEstimate.Estimate >= - pAC->Pnmi.RlmtChangeThreshold)) { - - QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - } - - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, - 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, - EventParam); - break; - - case SK_PNMI_EVT_CLEAR_COUNTER: - /* - * Param.Para32[0] contains the NetIndex (0 ..1). - * Param.Para32[1] is reserved, contains -1. - */ - NetIndex = (SK_U32)Param.Para32[0]; - -#ifdef DEBUG - if (NetIndex >= pAC->Rlmt.NumNets) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n", - NetIndex)); - - return (0); - } -#endif /* DEBUG */ - - /* - * Set all counters and timestamps to zero. - * The according NetIndex is required as a - * parameter of the event. - */ - ResetCounter(pAC, IoC, NetIndex); - break; - - case SK_PNMI_EVT_XMAC_RESET: - /* - * To grant continuous counter values store the current - * XMAC statistic values to the entries 1..n of the - * CounterOffset array. XMAC Errata #2 - */ -#ifdef DEBUG - if ((unsigned int)Param.Para64 >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n", - (unsigned int)Param.Para64)); - return (0); - } -#endif - PhysPortIndex = (unsigned int)Param.Para64; - - /* - * Update XMAC statistic to get fresh values - */ - Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); - if (Ret != SK_PNMI_ERR_OK) { - - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); - } - /* - * Increment semaphore to indicate that an update was - * already done - */ - pAC->Pnmi.MacUpdatedFlag ++; - - for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; - CounterIndex ++) { - - if (!StatAddr[CounterIndex][MacType].GetOffset) { - - continue; - } - - pAC->Pnmi.Port[PhysPortIndex].CounterOffset[CounterIndex] = - GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); - - pAC->Pnmi.Port[PhysPortIndex].CounterHigh[CounterIndex] = 0; - } - - pAC->Pnmi.MacUpdatedFlag --; - break; - - case SK_PNMI_EVT_RLMT_PORT_UP: - PhysPortIndex = (unsigned int)Param.Para32[0]; -#ifdef DEBUG - if (PhysPortIndex >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter" - " wrong, PhysPortIndex=%d\n", PhysPortIndex)); - - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate an event for - * user space applications with the SK_DRIVER_SENDEVENT macro. - */ - QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - - /* Bugfix for XMAC errata (#10620)*/ - if (MacType == SK_MAC_XMAC) { - /* Add incremental difference to offset (#10620)*/ - (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, - XM_RXE_SHT_ERR, &Val32); - - Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. - CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); - pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] += - Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark; - } - - /* Tell VctStatus() that a link was up meanwhile. */ - pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; - break; - - case SK_PNMI_EVT_RLMT_PORT_DOWN: - PhysPortIndex = (unsigned int)Param.Para32[0]; - -#ifdef DEBUG - if (PhysPortIndex >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter" - " wrong, PhysPortIndex=%d\n", PhysPortIndex)); - - return (0); - } -#endif /* DEBUG */ - - /* - * Store a trap message in the trap buffer and generate an event for - * user space applications with the SK_DRIVER_SENDEVENT macro. - */ - QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - - /* Bugfix #10620 - get zero level for incremental difference */ - if (MacType == SK_MAC_XMAC) { - - (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, - XM_RXE_SHT_ERR, &Val32); - - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = - (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. - CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); - } - break; - - case SK_PNMI_EVT_RLMT_ACTIVE_DOWN: - PhysPortIndex = (unsigned int)Param.Para32[0]; - NetIndex = (SK_U32)Param.Para32[1]; - -#ifdef DEBUG - if (PhysPortIndex >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n", - PhysPortIndex)); - } - - if (NetIndex >= pAC->Rlmt.NumNets) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n", - NetIndex)); - } -#endif /* DEBUG */ - - /* - * For now, ignore event if NetIndex != 0. - */ - if (Param.Para32[1] != 0) { - - return (0); - } - - /* - * Nothing to do if port is already inactive - */ - if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - return (0); - } - - /* - * Update statistic counters to calculate new offset for the virtual - * port and increment semaphore to indicate that an update was already - * done. - */ - if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != - SK_PNMI_ERR_OK) { - - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); - } - pAC->Pnmi.MacUpdatedFlag ++; - - /* - * Calculate new counter offset for virtual port to grant continous - * counting on port switches. The virtual port consists of all currently - * active ports. The port down event indicates that a port is removed - * from the virtual port. Therefore add the counter value of the removed - * port to the CounterOffset for the virtual port to grant the same - * counter value. - */ - for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; - CounterIndex ++) { - - if (!StatAddr[CounterIndex][MacType].GetOffset) { - - continue; - } - - Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); - - pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value; - } - - /* - * Set port to inactive - */ - pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE; - - pAC->Pnmi.MacUpdatedFlag --; - break; - - case SK_PNMI_EVT_RLMT_ACTIVE_UP: - PhysPortIndex = (unsigned int)Param.Para32[0]; - NetIndex = (SK_U32)Param.Para32[1]; - -#ifdef DEBUG - if (PhysPortIndex >= SK_MAX_MACS) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n", - PhysPortIndex)); - } - - if (NetIndex >= pAC->Rlmt.NumNets) { - - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, - ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n", - NetIndex)); - } -#endif /* DEBUG */ - - /* - * For now, ignore event if NetIndex != 0. - */ - if (Param.Para32[1] != 0) { - - return (0); - } - - /* - * Nothing to do if port is already active - */ - if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - return (0); - } - - /* - * Statistic maintenance - */ - pAC->Pnmi.RlmtChangeCts ++; - pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); - - /* - * Store a trap message in the trap buffer and generate an event for - * user space applications with the SK_DRIVER_SENDEVENT macro. - */ - QueueRlmtNewMacTrap(pAC, PhysPortIndex); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - - /* - * Update statistic counters to calculate new offset for the virtual - * port and increment semaphore to indicate that an update was - * already done. - */ - if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != - SK_PNMI_ERR_OK) { - - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); - } - pAC->Pnmi.MacUpdatedFlag ++; - - /* - * Calculate new counter offset for virtual port to grant continous - * counting on port switches. A new port is added to the virtual port. - * Therefore substract the counter value of the new port from the - * CounterOffset for the virtual port to grant the same value. - */ - for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; - CounterIndex ++) { - - if (!StatAddr[CounterIndex][MacType].GetOffset) { - - continue; - } - - Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); - - pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value; - } - - /* Set port to active */ - pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE; - - pAC->Pnmi.MacUpdatedFlag --; - break; - - case SK_PNMI_EVT_RLMT_SEGMENTATION: - /* - * Para.Para32[0] contains the NetIndex. - */ - - /* - * Store a trap message in the trap buffer and generate an event for - * user space applications with the SK_DRIVER_SENDEVENT macro. - */ - QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION); - (void)SK_DRIVER_SENDEVENT(pAC, IoC); - break; - - case SK_PNMI_EVT_RLMT_SET_NETS: - /* - * Param.Para32[0] contains the number of Nets. - * Param.Para32[1] is reserved, contains -1. - */ - /* - * Check number of nets - */ - MaxNetNumber = pAC->GIni.GIMacsFound; - if (((unsigned int)Param.Para32[0] < 1) - || ((unsigned int)Param.Para32[0] > MaxNetNumber)) { - return (SK_PNMI_ERR_UNKNOWN_NET); - } - - if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ - pAC->Pnmi.DualNetActiveFlag = SK_FALSE; - } - else { /* dual net mode */ - pAC->Pnmi.DualNetActiveFlag = SK_TRUE; - } - break; - - case SK_PNMI_EVT_VCT_RESET: - PhysPortIndex = Param.Para32[0]; - pPrt = &pAC->GIni.GP[PhysPortIndex]; - pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; - - if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { - RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); - if (RetCode == 2) { - /* - * VCT test is still running. - * Start VCT timer counter again. - */ - SK_MEMSET((char *) &Param, 0, sizeof(Param)); - Param.Para32[0] = PhysPortIndex; - Param.Para32[1] = -1; - SkTimerStart(pAC, IoC, - &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, - 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param); - break; - } - pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; - pAC->Pnmi.VctStatus[PhysPortIndex] |= - (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); - - /* Copy results for later use to PNMI struct. */ - for (i = 0; i < 4; i++) { - if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { - if ((pPrt->PMdiPairLen[i] > 35) && - (pPrt->PMdiPairLen[i] < 0xff)) { - pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; - } - } - if ((pPrt->PMdiPairLen[i] > 35) && - (pPrt->PMdiPairLen[i] != 0xff)) { - CableLength = 1000 * - (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); - } - else { - CableLength = 0; - } - pVctBackupData->PMdiPairLen[i] = CableLength; - pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; - } - - Param.Para32[0] = PhysPortIndex; - Param.Para32[1] = -1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param); - SkEventDispatcher(pAC, IoC); - } - - break; - - default: - break; - } - - SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); -} - - -/****************************************************************************** - * - * Private functions - * - */ - -/***************************************************************************** - * - * PnmiVar - Gets, presets, and sets single OIDs - * - * Description: - * Looks up the requested OID, calls the corresponding handler - * function, and passes the parameters with the get, preset, or - * set command. The function is called by SkGePnmiGetVar, - * SkGePnmiPreSetVar, or SkGePnmiSetVar. - * - * Returns: - * SK_PNMI_ERR_XXX. For details have a look at the description of the - * calling functions. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist - */ -PNMI_STATIC int PnmiVar( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* Total length of pBuf management data */ -SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int TableIndex; - int Ret; - - - if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_OID); - } - - /* Check NetIndex */ - if (NetIndex >= pAC->Rlmt.NumNets) { - return (SK_PNMI_ERR_UNKNOWN_NET); - } - - SK_PNMI_CHECKFLAGS("PnmiVar: On call"); - - Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen, - Instance, TableIndex, NetIndex); - - SK_PNMI_CHECKFLAGS("PnmiVar: On return"); - - return (Ret); -} - -/***************************************************************************** - * - * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA - * - * Description: - * The return value of the function will also be stored in - * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of - * SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable, - * checks which OIDs are able to set, and calls the handler function of - * the OID to perform the set. The return value of the function will - * also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the - * minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called - * by SkGePnmiPreSetStruct and SkGePnmiSetStruct. - * - * Returns: - * SK_PNMI_ERR_XXX. The codes are described in the calling functions. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist - */ -PNMI_STATIC int PnmiStruct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* PRESET/SET action to be performed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* Length of pBuf management data buffer */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - unsigned int TableIndex; - unsigned int DstOffset; - unsigned int Len; - unsigned int InstanceNo; - unsigned int InstanceCnt; - SK_U32 Instance; - SK_U32 Id; - - - /* Check if the passed buffer has the right size */ - if (*pLen < SK_PNMI_STRUCT_SIZE) { - - /* Check if we can return the error within the buffer */ - if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { - - SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, - (SK_U32)(-1)); - } - - *pLen = SK_PNMI_STRUCT_SIZE; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* Check NetIndex */ - if (NetIndex >= pAC->Rlmt.NumNets) { - return (SK_PNMI_ERR_UNKNOWN_NET); - } - - SK_PNMI_CHECKFLAGS("PnmiStruct: On call"); - - /* - * Update the values of RLMT and SIRQ and increment semaphores to - * indicate that an update was already done. - */ - if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { - - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - - if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { - - SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (Ret); - } - - pAC->Pnmi.RlmtUpdatedFlag ++; - pAC->Pnmi.SirqUpdatedFlag ++; - - /* Preset/Set values */ - for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { - - if ((IdTable[TableIndex].Access != SK_PNMI_RW) && - (IdTable[TableIndex].Access != SK_PNMI_WO)) { - - continue; - } - - InstanceNo = IdTable[TableIndex].InstanceNo; - Id = IdTable[TableIndex].Id; - - for (InstanceCnt = 1; InstanceCnt <= InstanceNo; - InstanceCnt ++) { - - DstOffset = IdTable[TableIndex].Offset + - (InstanceCnt - 1) * - IdTable[TableIndex].StructSize; - - /* - * Because VPD multiple instance variables are - * not setable we do not need to evaluate VPD - * instances. Have a look to VPD instance - * calculation in SkPnmiGetStruct(). - */ - Instance = (SK_U32)InstanceCnt; - - /* - * Evaluate needed buffer length - */ - Len = 0; - Ret = IdTable[TableIndex].Func(pAC, IoC, - SK_PNMI_GET, IdTable[TableIndex].Id, - NULL, &Len, Instance, TableIndex, NetIndex); - - if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { - - break; - } - if (Ret != SK_PNMI_ERR_TOO_SHORT) { - - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); - SK_PNMI_SET_STAT(pBuf, - SK_PNMI_ERR_GENERAL, DstOffset); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (SK_PNMI_ERR_GENERAL); - } - if (Id == OID_SKGE_VPD_ACTION) { - - switch (*(pBuf + DstOffset)) { - - case SK_PNMI_VPD_CREATE: - Len = 3 + *(pBuf + DstOffset + 3); - break; - - case SK_PNMI_VPD_DELETE: - Len = 3; - break; - - default: - Len = 1; - break; - } - } - - /* Call the OID handler function */ - Ret = IdTable[TableIndex].Func(pAC, IoC, Action, - IdTable[TableIndex].Id, pBuf + DstOffset, - &Len, Instance, TableIndex, NetIndex); - - if (Ret != SK_PNMI_ERR_OK) { - - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); - SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE, - DstOffset); - *pLen = SK_PNMI_MIN_STRUCT_SIZE; - return (SK_PNMI_ERR_BAD_VALUE); - } - } - } - - pAC->Pnmi.RlmtUpdatedFlag --; - pAC->Pnmi.SirqUpdatedFlag --; - - SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); - SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * LookupId - Lookup an OID in the IdTable - * - * Description: - * Scans the IdTable to find the table entry of an OID. - * - * Returns: - * The table index or -1 if not found. - */ -PNMI_STATIC int LookupId( -SK_U32 Id) /* Object identifier to be searched */ -{ - int i; - - for (i = 0; i < ID_TABLE_SIZE; i++) { - - if (IdTable[i].Id == Id) { - - return i; - } - } - - return (-1); -} - -/***************************************************************************** - * - * OidStruct - Handler of OID_SKGE_ALL_DATA - * - * Description: - * This OID performs a Get/Preset/SetStruct call and returns all data - * in a SK_PNMI_STRUCT_DATA structure. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int OidStruct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - if (Id != OID_SKGE_ALL_DATA) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003, - SK_PNMI_ERR003MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Check instance. We only handle single instance variables - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - switch (Action) { - - case SK_PNMI_GET: - return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex)); - - case SK_PNMI_PRESET: - return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); - - case SK_PNMI_SET: - return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); - } - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); -} - -/***************************************************************************** - * - * Perform - OID handler of OID_SKGE_ACTION - * - * Description: - * None. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Perform( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - SK_U32 ActionOp; - - - /* - * Check instance. We only handle single instance variables - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* Check if a get should be performed */ - if (Action == SK_PNMI_GET) { - - /* A get is easy. We always return the same value */ - ActionOp = (SK_U32)SK_PNMI_ACT_IDLE; - SK_PNMI_STORE_U32(pBuf, ActionOp); - *pLen = sizeof(SK_U32); - - return (SK_PNMI_ERR_OK); - } - - /* Continue with PRESET/SET action */ - if (*pLen > sizeof(SK_U32)) { - - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* Check if the command is a known one */ - SK_PNMI_READ_U32(pBuf, ActionOp); - if (*pLen > sizeof(SK_U32) || - (ActionOp != SK_PNMI_ACT_IDLE && - ActionOp != SK_PNMI_ACT_RESET && - ActionOp != SK_PNMI_ACT_SELFTEST && - ActionOp != SK_PNMI_ACT_RESETCNT)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* A preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - switch (ActionOp) { - - case SK_PNMI_ACT_IDLE: - /* Nothing to do */ - break; - - case SK_PNMI_ACT_RESET: - /* - * Perform a driver reset or something that comes near - * to this. - */ - Ret = SK_DRIVER_RESET(pAC, IoC); - if (Ret != 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005, - SK_PNMI_ERR005MSG); - - return (SK_PNMI_ERR_GENERAL); - } - break; - - case SK_PNMI_ACT_SELFTEST: - /* - * Perform a driver selftest or something similar to this. - * Currently this feature is not used and will probably - * implemented in another way. - */ - Ret = SK_DRIVER_SELFTEST(pAC, IoC); - pAC->Pnmi.TestResult = Ret; - break; - - case SK_PNMI_ACT_RESETCNT: - /* Set all counters and timestamps to zero */ - ResetCounter(pAC, IoC, NetIndex); - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006, - SK_PNMI_ERR006MSG); - - return (SK_PNMI_ERR_GENERAL); - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX - * - * Description: - * Retrieves the statistic values of the virtual port (logical - * index 0). Only special OIDs of NDIS are handled which consist - * of a 32 bit instead of a 64 bit value. The OIDs are public - * because perhaps some other platform can use them too. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Mac8023Stat( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - SK_U64 StatVal; - SK_U32 StatVal32; - SK_BOOL Is64BitReq = SK_FALSE; - - /* - * Only the active Mac is returned - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - /* - * Check action type - */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* Check length */ - switch (Id) { - - case OID_802_3_PERMANENT_ADDRESS: - case OID_802_3_CURRENT_ADDRESS: - if (*pLen < sizeof(SK_MAC_ADDR)) { - - *pLen = sizeof(SK_MAC_ADDR); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: -#ifndef SK_NDIS_64BIT_CTR - if (*pLen < sizeof(SK_U32)) { - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - -#else /* SK_NDIS_64BIT_CTR */ - - /* for compatibility, at least 32bit are required for OID */ - if (*pLen < sizeof(SK_U32)) { - /* - * but indicate handling for 64bit values, - * if insufficient space is provided - */ - *pLen = sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - - Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; -#endif /* SK_NDIS_64BIT_CTR */ - break; - } - - /* - * Update all statistics, because we retrieve virtual MAC, which - * consists of multiple physical statistics and increment semaphore - * to indicate that an update was already done. - */ - Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); - if ( Ret != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.MacUpdatedFlag ++; - - /* - * Get value (MAC Index 0 identifies the virtual MAC) - */ - switch (Id) { - - case OID_802_3_PERMANENT_ADDRESS: - CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress); - *pLen = sizeof(SK_MAC_ADDR); - break; - - case OID_802_3_CURRENT_ADDRESS: - CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress); - *pLen = sizeof(SK_MAC_ADDR); - break; - - default: - StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex); - - /* by default 32bit values are evaluated */ - if (!Is64BitReq) { - StatVal32 = (SK_U32)StatVal; - SK_PNMI_STORE_U32(pBuf, StatVal32); - *pLen = sizeof(SK_U32); - } - else { - SK_PNMI_STORE_U64(pBuf, StatVal); - *pLen = sizeof(SK_U64); - } - break; - } - - pAC->Pnmi.MacUpdatedFlag --; - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX - * - * Description: - * Retrieves the MAC statistic data. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int MacPrivateStat( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int LogPortMax; - unsigned int LogPortIndex; - unsigned int PhysPortMax; - unsigned int Limit; - unsigned int Offset; - int MacType; - int Ret; - SK_U64 StatVal; - - - - /* Calculate instance if wished. MAC index 0 is the virtual MAC */ - PhysPortMax = pAC->GIni.GIMacsFound; - LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); - - MacType = pAC->GIni.GIMacType; - - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ - LogPortMax--; - } - - if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ - /* Check instance range */ - if ((Instance < 1) || (Instance > LogPortMax)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); - Limit = LogPortIndex + 1; - } - - else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ - - LogPortIndex = 0; - Limit = LogPortMax; - } - - /* Check action */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* Check length */ - if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) { - - *pLen = (Limit - LogPortIndex) * sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Update MAC statistic and increment semaphore to indicate that - * an update was already done. - */ - Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); - if (Ret != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.MacUpdatedFlag ++; - - /* Get value */ - Offset = 0; - for (; LogPortIndex < Limit; LogPortIndex ++) { - - switch (Id) { - -/* XXX not yet implemented due to XMAC problems - case OID_SKGE_STAT_TX_UTIL: - return (SK_PNMI_ERR_GENERAL); -*/ -/* XXX not yet implemented due to XMAC problems - case OID_SKGE_STAT_RX_UTIL: - return (SK_PNMI_ERR_GENERAL); -*/ - case OID_SKGE_STAT_RX: - if (MacType == SK_MAC_GMAC) { - StatVal = - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HRX_BROADCAST, NetIndex) + - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HRX_MULTICAST, NetIndex) + - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HRX_UNICAST, NetIndex) + - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HRX_UNDERSIZE, NetIndex); - } - else { - StatVal = GetStatVal(pAC, IoC, LogPortIndex, - IdTable[TableIndex].Param, NetIndex); - } - break; - - case OID_SKGE_STAT_TX: - if (MacType == SK_MAC_GMAC) { - StatVal = - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HTX_BROADCAST, NetIndex) + - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HTX_MULTICAST, NetIndex) + - GetStatVal(pAC, IoC, LogPortIndex, - SK_PNMI_HTX_UNICAST, NetIndex); - } - else { - StatVal = GetStatVal(pAC, IoC, LogPortIndex, - IdTable[TableIndex].Param, NetIndex); - } - break; - - default: - StatVal = GetStatVal(pAC, IoC, LogPortIndex, - IdTable[TableIndex].Param, NetIndex); - } - SK_PNMI_STORE_U64(pBuf + Offset, StatVal); - - Offset += sizeof(SK_U64); - } - *pLen = Offset; - - pAC->Pnmi.MacUpdatedFlag --; - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR - * - * Description: - * Get/Presets/Sets the current and factory MAC address. The MAC - * address of the virtual port, which is reported to the OS, may - * not be changed, but the physical ones. A set to the virtual port - * will be ignored. No error should be reported because otherwise - * a multiple instance set (-1) would always fail. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Addr( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - unsigned int LogPortMax; - unsigned int PhysPortMax; - unsigned int LogPortIndex; - unsigned int PhysPortIndex; - unsigned int Limit; - unsigned int Offset = 0; - - /* - * Calculate instance if wished. MAC index 0 is the virtual - * MAC. - */ - PhysPortMax = pAC->GIni.GIMacsFound; - LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); - - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ - LogPortMax--; - } - - if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ - /* Check instance range */ - if ((Instance < 1) || (Instance > LogPortMax)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); - Limit = LogPortIndex + 1; - } - else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ - - LogPortIndex = 0; - Limit = LogPortMax; - } - - /* - * Perform Action - */ - if (Action == SK_PNMI_GET) { - - /* Check length */ - if (*pLen < (Limit - LogPortIndex) * 6) { - - *pLen = (Limit - LogPortIndex) * 6; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Get value - */ - for (; LogPortIndex < Limit; LogPortIndex ++) { - - switch (Id) { - - case OID_SKGE_PHYS_CUR_ADDR: - if (LogPortIndex == 0) { - CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress); - } - else { - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); - - CopyMac(pBuf + Offset, - &pAC->Addr.Port[PhysPortIndex].CurrentMacAddress); - } - Offset += 6; - break; - - case OID_SKGE_PHYS_FAC_ADDR: - if (LogPortIndex == 0) { - CopyMac(pBuf + Offset, - &pAC->Addr.Net[NetIndex].PermanentMacAddress); - } - else { - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - CopyMac(pBuf + Offset, - &pAC->Addr.Port[PhysPortIndex].PermanentMacAddress); - } - Offset += 6; - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008, - SK_PNMI_ERR008MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - - *pLen = Offset; - } - else { - /* - * The logical MAC address may not be changed only - * the physical ones - */ - if (Id == OID_SKGE_PHYS_FAC_ADDR) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* - * Only the current address may be changed - */ - if (Id != OID_SKGE_PHYS_CUR_ADDR) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009, - SK_PNMI_ERR009MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* Check length */ - if (*pLen < (Limit - LogPortIndex) * 6) { - - *pLen = (Limit - LogPortIndex) * 6; - return (SK_PNMI_ERR_TOO_SHORT); - } - if (*pLen > (Limit - LogPortIndex) * 6) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* - * Check Action - */ - if (Action == SK_PNMI_PRESET) { - - *pLen = 0; - return (SK_PNMI_ERR_OK); - } - - /* - * Set OID_SKGE_MAC_CUR_ADDR - */ - for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) { - - /* - * A set to virtual port and set of broadcast - * address will be ignored - */ - if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset, - "\xff\xff\xff\xff\xff\xff", 6) == 0) { - - continue; - } - - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, - LogPortIndex); - - Ret = SkAddrOverride(pAC, IoC, PhysPortIndex, - (SK_MAC_ADDR *)(pBuf + Offset), - (LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS : - SK_ADDR_PHYSICAL_ADDRESS)); - if (Ret != SK_ADDR_OVERRIDE_SUCCESS) { - - return (SK_PNMI_ERR_GENERAL); - } - } - *pLen = Offset; - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX - * - * Description: - * Retrieves the statistic values of the CSUM module. The CSUM data - * structure must be available in the SK_AC even if the CSUM module - * is not included, because PNMI reads the statistic data from the - * CSUM part of SK_AC directly. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int CsumStat( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int Index; - unsigned int Limit; - unsigned int Offset = 0; - SK_U64 StatVal; - - - /* - * Calculate instance if wished - */ - if (Instance != (SK_U32)(-1)) { - - if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - Index = (unsigned int)Instance - 1; - Limit = Index + 1; - } - else { - Index = 0; - Limit = SKCS_NUM_PROTOCOLS; - } - - /* - * Check action - */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* Check length */ - if (*pLen < (Limit - Index) * sizeof(SK_U64)) { - - *pLen = (Limit - Index) * sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Get value - */ - for (; Index < Limit; Index ++) { - - switch (Id) { - - case OID_SKGE_CHKSM_RX_OK_CTS: - StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts; - break; - - case OID_SKGE_CHKSM_RX_UNABLE_CTS: - StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts; - break; - - case OID_SKGE_CHKSM_RX_ERR_CTS: - StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts; - break; - - case OID_SKGE_CHKSM_TX_OK_CTS: - StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts; - break; - - case OID_SKGE_CHKSM_TX_UNABLE_CTS: - StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts; - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010, - SK_PNMI_ERR010MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - SK_PNMI_STORE_U64(pBuf + Offset, StatVal); - Offset += sizeof(SK_U64); - } - - /* - * Store used buffer space - */ - *pLen = Offset; - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX - * - * Description: - * Retrieves the statistic values of the I2C module, which handles - * the temperature and voltage sensors. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int SensorStat( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int i; - unsigned int Index; - unsigned int Limit; - unsigned int Offset; - unsigned int Len; - SK_U32 Val32; - SK_U64 Val64; - - - /* - * Calculate instance if wished - */ - if ((Instance != (SK_U32)(-1))) { - - if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - Index = (unsigned int)Instance -1; - Limit = (unsigned int)Instance; - } - else { - Index = 0; - Limit = (unsigned int) pAC->I2c.MaxSens; - } - - /* - * Check action - */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* Check length */ - switch (Id) { - - case OID_SKGE_SENSOR_VALUE: - case OID_SKGE_SENSOR_WAR_THRES_LOW: - case OID_SKGE_SENSOR_WAR_THRES_UPP: - case OID_SKGE_SENSOR_ERR_THRES_LOW: - case OID_SKGE_SENSOR_ERR_THRES_UPP: - if (*pLen < (Limit - Index) * sizeof(SK_U32)) { - - *pLen = (Limit - Index) * sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_SENSOR_DESCR: - for (Offset = 0, i = Index; i < Limit; i ++) { - - Len = (unsigned int) - SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1; - if (Len >= SK_PNMI_STRINGLEN2) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011, - SK_PNMI_ERR011MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - Offset += Len; - } - if (*pLen < Offset) { - - *pLen = Offset; - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_SENSOR_INDEX: - case OID_SKGE_SENSOR_TYPE: - case OID_SKGE_SENSOR_STATUS: - if (*pLen < Limit - Index) { - - *pLen = Limit - Index; - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_SENSOR_WAR_CTS: - case OID_SKGE_SENSOR_WAR_TIME: - case OID_SKGE_SENSOR_ERR_CTS: - case OID_SKGE_SENSOR_ERR_TIME: - if (*pLen < (Limit - Index) * sizeof(SK_U64)) { - - *pLen = (Limit - Index) * sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012, - SK_PNMI_ERR012MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - - } - - /* - * Get value - */ - for (Offset = 0; Index < Limit; Index ++) { - - switch (Id) { - - case OID_SKGE_SENSOR_INDEX: - *(pBuf + Offset) = (char)Index; - Offset += sizeof(char); - break; - - case OID_SKGE_SENSOR_DESCR: - Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc); - SK_MEMCPY(pBuf + Offset + 1, - pAC->I2c.SenTable[Index].SenDesc, Len); - *(pBuf + Offset) = (char)Len; - Offset += Len + 1; - break; - - case OID_SKGE_SENSOR_TYPE: - *(pBuf + Offset) = - (char)pAC->I2c.SenTable[Index].SenType; - Offset += sizeof(char); - break; - - case OID_SKGE_SENSOR_VALUE: - Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_WAR_THRES_LOW: - Val32 = (SK_U32)pAC->I2c.SenTable[Index]. - SenThreWarnLow; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_WAR_THRES_UPP: - Val32 = (SK_U32)pAC->I2c.SenTable[Index]. - SenThreWarnHigh; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_ERR_THRES_LOW: - Val32 = (SK_U32)pAC->I2c.SenTable[Index]. - SenThreErrLow; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_ERR_THRES_UPP: - Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_STATUS: - *(pBuf + Offset) = - (char)pAC->I2c.SenTable[Index].SenErrFlag; - Offset += sizeof(char); - break; - - case OID_SKGE_SENSOR_WAR_CTS: - Val64 = pAC->I2c.SenTable[Index].SenWarnCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_SENSOR_ERR_CTS: - Val64 = pAC->I2c.SenTable[Index].SenErrCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_SENSOR_WAR_TIME: - Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. - SenBegWarnTS); - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_SENSOR_ERR_TIME: - Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. - SenBegErrTS); - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("SensorStat: Unknown OID should be handled before")); - - return (SK_PNMI_ERR_GENERAL); - } - } - - /* - * Store used buffer space - */ - *pLen = Offset; - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * Vpd - OID handler function of OID_SKGE_VPD_XXX - * - * Description: - * Get/preset/set of VPD data. As instance the name of a VPD key - * can be passed. The Instance parameter is a SK_U32 and can be - * used as a string buffer for the VPD key, because their maximum - * length is 4 byte. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Vpd( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_VPD_STATUS *pVpdStatus; - unsigned int BufLen; - char Buf[256]; - char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; - char KeyStr[SK_PNMI_VPD_KEY_SIZE]; - unsigned int KeyNo; - unsigned int Offset; - unsigned int Index; - unsigned int FirstIndex; - unsigned int LastIndex; - unsigned int Len; - int Ret; - SK_U32 Val32; - - /* - * Get array of all currently stored VPD keys - */ - Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &KeyNo); - if (Ret != SK_PNMI_ERR_OK) { - *pLen = 0; - return (Ret); - } - - /* - * If instance is not -1, try to find the requested VPD key for - * the multiple instance variables. The other OIDs as for example - * OID VPD_ACTION are single instance variables and must be - * handled separatly. - */ - FirstIndex = 0; - LastIndex = KeyNo; - - if ((Instance != (SK_U32)(-1))) { - - if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE || - Id == OID_SKGE_VPD_ACCESS) { - - SK_STRNCPY(KeyStr, (char *)&Instance, 4); - KeyStr[4] = 0; - - for (Index = 0; Index < KeyNo; Index ++) { - - if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { - FirstIndex = Index; - LastIndex = Index+1; - break; - } - } - if (Index == KeyNo) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - } - else if (Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - } - - /* - * Get value, if a query should be performed - */ - if (Action == SK_PNMI_GET) { - - switch (Id) { - - case OID_SKGE_VPD_FREE_BYTES: - /* Check length of buffer */ - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - /* Get number of free bytes */ - pVpdStatus = VpdStat(pAC, IoC); - if (pVpdStatus == NULL) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017, - SK_PNMI_ERR017MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - if ((pVpdStatus->vpd_status & VPD_VALID) == 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018, - SK_PNMI_ERR018MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - Val32 = (SK_U32)pVpdStatus->vpd_free_rw; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_VPD_ENTRIES_LIST: - /* Check length */ - for (Len = 0, Index = 0; Index < KeyNo; Index ++) { - - Len += SK_STRLEN(KeyArr[Index]) + 1; - } - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* Get value */ - *(pBuf) = (char)Len - 1; - for (Offset = 1, Index = 0; Index < KeyNo; Index ++) { - - Len = SK_STRLEN(KeyArr[Index]); - SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len); - - Offset += Len; - - if (Index < KeyNo - 1) { - - *(pBuf + Offset) = ' '; - Offset ++; - } - } - *pLen = Offset; - break; - - case OID_SKGE_VPD_ENTRIES_NUMBER: - /* Check length */ - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - - Val32 = (SK_U32)KeyNo; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_VPD_KEY: - /* Check buffer length, if it is large enough */ - for (Len = 0, Index = FirstIndex; - Index < LastIndex; Index ++) { - - Len += SK_STRLEN(KeyArr[Index]) + 1; - } - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Get the key to an intermediate buffer, because - * we have to prepend a length byte. - */ - for (Offset = 0, Index = FirstIndex; - Index < LastIndex; Index ++) { - - Len = SK_STRLEN(KeyArr[Index]); - - *(pBuf + Offset) = (char)Len; - SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index], - Len); - Offset += Len + 1; - } - *pLen = Offset; - break; - - case OID_SKGE_VPD_VALUE: - /* Check the buffer length if it is large enough */ - for (Offset = 0, Index = FirstIndex; - Index < LastIndex; Index ++) { - - BufLen = 256; - if (VpdRead(pAC, IoC, KeyArr[Index], Buf, - (int *)&BufLen) > 0 || - BufLen >= SK_PNMI_VPD_DATALEN) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR021, - SK_PNMI_ERR021MSG); - - return (SK_PNMI_ERR_GENERAL); - } - Offset += BufLen + 1; - } - if (*pLen < Offset) { - - *pLen = Offset; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * Get the value to an intermediate buffer, because - * we have to prepend a length byte. - */ - for (Offset = 0, Index = FirstIndex; - Index < LastIndex; Index ++) { - - BufLen = 256; - if (VpdRead(pAC, IoC, KeyArr[Index], Buf, - (int *)&BufLen) > 0 || - BufLen >= SK_PNMI_VPD_DATALEN) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR022, - SK_PNMI_ERR022MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - *(pBuf + Offset) = (char)BufLen; - SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen); - Offset += BufLen + 1; - } - *pLen = Offset; - break; - - case OID_SKGE_VPD_ACCESS: - if (*pLen < LastIndex - FirstIndex) { - - *pLen = LastIndex - FirstIndex; - return (SK_PNMI_ERR_TOO_SHORT); - } - - for (Offset = 0, Index = FirstIndex; - Index < LastIndex; Index ++) { - - if (VpdMayWrite(KeyArr[Index])) { - - *(pBuf + Offset) = SK_PNMI_VPD_RW; - } - else { - *(pBuf + Offset) = SK_PNMI_VPD_RO; - } - Offset ++; - } - *pLen = Offset; - break; - - case OID_SKGE_VPD_ACTION: - Offset = LastIndex - FirstIndex; - if (*pLen < Offset) { - - *pLen = Offset; - return (SK_PNMI_ERR_TOO_SHORT); - } - SK_MEMSET(pBuf, 0, Offset); - *pLen = Offset; - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023, - SK_PNMI_ERR023MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - else { - /* The only OID which can be set is VPD_ACTION */ - if (Id != OID_SKGE_VPD_ACTION) { - - if (Id == OID_SKGE_VPD_FREE_BYTES || - Id == OID_SKGE_VPD_ENTRIES_LIST || - Id == OID_SKGE_VPD_ENTRIES_NUMBER || - Id == OID_SKGE_VPD_KEY || - Id == OID_SKGE_VPD_VALUE || - Id == OID_SKGE_VPD_ACCESS) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024, - SK_PNMI_ERR024MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * From this point we handle VPD_ACTION. Check the buffer - * length. It should at least have the size of one byte. - */ - if (*pLen < 1) { - - *pLen = 1; - return (SK_PNMI_ERR_TOO_SHORT); - } - - /* - * The first byte contains the VPD action type we should - * perform. - */ - switch (*pBuf) { - - case SK_PNMI_VPD_IGNORE: - /* Nothing to do */ - break; - - case SK_PNMI_VPD_CREATE: - /* - * We have to create a new VPD entry or we modify - * an existing one. Check first the buffer length. - */ - if (*pLen < 4) { - - *pLen = 4; - return (SK_PNMI_ERR_TOO_SHORT); - } - KeyStr[0] = pBuf[1]; - KeyStr[1] = pBuf[2]; - KeyStr[2] = 0; - - /* - * Is the entry writable or does it belong to the - * read-only area? - */ - if (!VpdMayWrite(KeyStr)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - Offset = (int)pBuf[3] & 0xFF; - - SK_MEMCPY(Buf, pBuf + 4, Offset); - Buf[Offset] = 0; - - /* A preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - /* Write the new entry or modify an existing one */ - Ret = VpdWrite(pAC, IoC, KeyStr, Buf); - if (Ret == SK_PNMI_VPD_NOWRITE ) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - else if (Ret != SK_PNMI_VPD_OK) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025, - SK_PNMI_ERR025MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Perform an update of the VPD data. This is - * not mandantory, but just to be sure. - */ - Ret = VpdUpdate(pAC, IoC); - if (Ret != SK_PNMI_VPD_OK) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026, - SK_PNMI_ERR026MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - break; - - case SK_PNMI_VPD_DELETE: - /* Check if the buffer size is plausible */ - if (*pLen < 3) { - - *pLen = 3; - return (SK_PNMI_ERR_TOO_SHORT); - } - if (*pLen > 3) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - KeyStr[0] = pBuf[1]; - KeyStr[1] = pBuf[2]; - KeyStr[2] = 0; - - /* Find the passed key in the array */ - for (Index = 0; Index < KeyNo; Index ++) { - - if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { - - break; - } - } - /* - * If we cannot find the key it is wrong, so we - * return an appropriate error value. - */ - if (Index == KeyNo) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - /* Ok, you wanted it and you will get it */ - Ret = VpdDelete(pAC, IoC, KeyStr); - if (Ret != SK_PNMI_VPD_OK) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027, - SK_PNMI_ERR027MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Perform an update of the VPD data. This is - * not mandantory, but just to be sure. - */ - Ret = VpdUpdate(pAC, IoC); - if (Ret != SK_PNMI_VPD_OK) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028, - SK_PNMI_ERR028MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * General - OID handler function of various single instance OIDs - * - * Description: - * The code is simple. No description necessary. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int General( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - unsigned int Index; - unsigned int Len; - unsigned int Offset; - unsigned int Val; - SK_U8 Val8; - SK_U16 Val16; - SK_U32 Val32; - SK_U64 Val64; - SK_U64 Val64RxHwErrs = 0; - SK_U64 Val64TxHwErrs = 0; - SK_BOOL Is64BitReq = SK_FALSE; - char Buf[256]; - int MacType; - - /* - * Check instance. We only handle single instance variables. - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - /* - * Check action. We only allow get requests. - */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - MacType = pAC->GIni.GIMacType; - - /* - * Check length for the various supported OIDs - */ - switch (Id) { - - case OID_GEN_XMIT_ERROR: - case OID_GEN_RCV_ERROR: - case OID_GEN_RCV_NO_BUFFER: -#ifndef SK_NDIS_64BIT_CTR - if (*pLen < sizeof(SK_U32)) { - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - -#else /* SK_NDIS_64BIT_CTR */ - - /* - * for compatibility, at least 32bit are required for oid - */ - if (*pLen < sizeof(SK_U32)) { - /* - * but indicate handling for 64bit values, - * if insufficient space is provided - */ - *pLen = sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - - Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; -#endif /* SK_NDIS_64BIT_CTR */ - break; - - case OID_SKGE_PORT_NUMBER: - case OID_SKGE_DEVICE_TYPE: - case OID_SKGE_RESULT: - case OID_SKGE_RLMT_MONITOR_NUMBER: - case OID_GEN_TRANSMIT_QUEUE_LENGTH: - case OID_SKGE_TRAP_NUMBER: - case OID_SKGE_MDB_VERSION: - case OID_SKGE_BOARDLEVEL: - case OID_SKGE_CHIPID: - case OID_SKGE_RAMSIZE: - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_CHIPSET: - if (*pLen < sizeof(SK_U16)) { - - *pLen = sizeof(SK_U16); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_BUS_TYPE: - case OID_SKGE_BUS_SPEED: - case OID_SKGE_BUS_WIDTH: - case OID_SKGE_SENSOR_NUMBER: - case OID_SKGE_CHKSM_NUMBER: - case OID_SKGE_VAUXAVAIL: - if (*pLen < sizeof(SK_U8)) { - - *pLen = sizeof(SK_U8); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_TX_SW_QUEUE_LEN: - case OID_SKGE_TX_SW_QUEUE_MAX: - case OID_SKGE_TX_RETRY: - case OID_SKGE_RX_INTR_CTS: - case OID_SKGE_TX_INTR_CTS: - case OID_SKGE_RX_NO_BUF_CTS: - case OID_SKGE_TX_NO_BUF_CTS: - case OID_SKGE_TX_USED_DESCR_NO: - case OID_SKGE_RX_DELIVERED_CTS: - case OID_SKGE_RX_OCTETS_DELIV_CTS: - case OID_SKGE_RX_HW_ERROR_CTS: - case OID_SKGE_TX_HW_ERROR_CTS: - case OID_SKGE_IN_ERRORS_CTS: - case OID_SKGE_OUT_ERROR_CTS: - case OID_SKGE_ERR_RECOVERY_CTS: - case OID_SKGE_SYSUPTIME: - if (*pLen < sizeof(SK_U64)) { - - *pLen = sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - /* Checked later */ - break; - } - - /* Update statistic */ - if (Id == OID_SKGE_RX_HW_ERROR_CTS || - Id == OID_SKGE_TX_HW_ERROR_CTS || - Id == OID_SKGE_IN_ERRORS_CTS || - Id == OID_SKGE_OUT_ERROR_CTS || - Id == OID_GEN_XMIT_ERROR || - Id == OID_GEN_RCV_ERROR) { - - /* Force the XMAC to update its statistic counters and - * Increment semaphore to indicate that an update was - * already done. - */ - Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); - if (Ret != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.MacUpdatedFlag ++; - - /* - * Some OIDs consist of multiple hardware counters. Those - * values which are contained in all of them will be added - * now. - */ - switch (Id) { - - case OID_SKGE_RX_HW_ERROR_CTS: - case OID_SKGE_IN_ERRORS_CTS: - case OID_GEN_RCV_ERROR: - Val64RxHwErrs = - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex); - break; - - case OID_SKGE_TX_HW_ERROR_CTS: - case OID_SKGE_OUT_ERROR_CTS: - case OID_GEN_XMIT_ERROR: - Val64TxHwErrs = - GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex) + - GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex); - break; - } - } - - /* - * Retrieve value - */ - switch (Id) { - - case OID_SKGE_SUPPORTED_LIST: - Len = ID_TABLE_SIZE * sizeof(SK_U32); - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - for (Offset = 0, Index = 0; Offset < Len; - Offset += sizeof(SK_U32), Index ++) { - - Val32 = (SK_U32)IdTable[Index].Id; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - } - *pLen = Len; - break; - - case OID_SKGE_BOARDLEVEL: - Val32 = (SK_U32)pAC->GIni.GILevel; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_PORT_NUMBER: - Val32 = (SK_U32)pAC->GIni.GIMacsFound; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_DEVICE_TYPE: - Val32 = (SK_U32)pAC->Pnmi.DeviceType; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_DRIVER_DESCR: - if (pAC->Pnmi.pDriverDescription == NULL) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007, - SK_PNMI_ERR007MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1; - if (Len > SK_PNMI_STRINGLEN1) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029, - SK_PNMI_ERR029MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - *pBuf = (char)(Len - 1); - SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1); - *pLen = Len; - break; - - case OID_SKGE_DRIVER_VERSION: - if (pAC->Pnmi.pDriverVersion == NULL) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, - SK_PNMI_ERR030MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1; - if (Len > SK_PNMI_STRINGLEN1) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, - SK_PNMI_ERR031MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - *pBuf = (char)(Len - 1); - SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1); - *pLen = Len; - break; - - case OID_SKGE_DRIVER_RELDATE: - if (pAC->Pnmi.pDriverReleaseDate == NULL) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, - SK_PNMI_ERR053MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - Len = SK_STRLEN(pAC->Pnmi.pDriverReleaseDate) + 1; - if (Len > SK_PNMI_STRINGLEN1) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, - SK_PNMI_ERR054MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - *pBuf = (char)(Len - 1); - SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverReleaseDate, Len - 1); - *pLen = Len; - break; - - case OID_SKGE_DRIVER_FILENAME: - if (pAC->Pnmi.pDriverFileName == NULL) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, - SK_PNMI_ERR055MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - Len = SK_STRLEN(pAC->Pnmi.pDriverFileName) + 1; - if (Len > SK_PNMI_STRINGLEN1) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, - SK_PNMI_ERR056MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - *pBuf = (char)(Len - 1); - SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverFileName, Len - 1); - *pLen = Len; - break; - - case OID_SKGE_HW_DESCR: - /* - * The hardware description is located in the VPD. This - * query may move to the initialisation routine. But - * the VPD data is cached and therefore a call here - * will not make much difference. - */ - Len = 256; - if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032, - SK_PNMI_ERR032MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - Len ++; - if (Len > SK_PNMI_STRINGLEN1) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033, - SK_PNMI_ERR033MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - *pBuf = (char)(Len - 1); - SK_MEMCPY(pBuf + 1, Buf, Len - 1); - *pLen = Len; - break; - - case OID_SKGE_HW_VERSION: - /* Oh, I love to do some string manipulation */ - if (*pLen < 5) { - - *pLen = 5; - return (SK_PNMI_ERR_TOO_SHORT); - } - Val8 = (SK_U8)pAC->GIni.GIPciHwRev; - pBuf[0] = 4; - pBuf[1] = 'v'; - pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F)); - pBuf[3] = '.'; - pBuf[4] = (char)(0x30 | (Val8 & 0x0F)); - *pLen = 5; - break; - - case OID_SKGE_CHIPSET: - Val16 = pAC->Pnmi.Chipset; - SK_PNMI_STORE_U16(pBuf, Val16); - *pLen = sizeof(SK_U16); - break; - - case OID_SKGE_CHIPID: - Val32 = pAC->GIni.GIChipId; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_RAMSIZE: - Val32 = pAC->GIni.GIRamSize; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_VAUXAVAIL: - *pBuf = (char) pAC->GIni.GIVauxAvail; - *pLen = sizeof(char); - break; - - case OID_SKGE_BUS_TYPE: - *pBuf = (char) SK_PNMI_BUS_PCI; - *pLen = sizeof(char); - break; - - case OID_SKGE_BUS_SPEED: - *pBuf = pAC->Pnmi.PciBusSpeed; - *pLen = sizeof(char); - break; - - case OID_SKGE_BUS_WIDTH: - *pBuf = pAC->Pnmi.PciBusWidth; - *pLen = sizeof(char); - break; - - case OID_SKGE_RESULT: - Val32 = pAC->Pnmi.TestResult; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_SENSOR_NUMBER: - *pBuf = (char)pAC->I2c.MaxSens; - *pLen = sizeof(char); - break; - - case OID_SKGE_CHKSM_NUMBER: - *pBuf = SKCS_NUM_PROTOCOLS; - *pLen = sizeof(char); - break; - - case OID_SKGE_TRAP_NUMBER: - GetTrapQueueLen(pAC, &Len, &Val); - Val32 = (SK_U32)Val; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_TRAP: - GetTrapQueueLen(pAC, &Len, &Val); - if (*pLen < Len) { - - *pLen = Len; - return (SK_PNMI_ERR_TOO_SHORT); - } - CopyTrapQueue(pAC, pBuf); - *pLen = Len; - break; - - case OID_SKGE_RLMT_MONITOR_NUMBER: -/* XXX Not yet implemented by RLMT therefore we return zero elements */ - Val32 = 0; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_TX_SW_QUEUE_LEN: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen + - pAC->Pnmi.BufPort[1].TxSwQueueLen; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxSwQueueLen + - pAC->Pnmi.Port[1].TxSwQueueLen; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - - case OID_SKGE_TX_SW_QUEUE_MAX: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax + - pAC->Pnmi.BufPort[1].TxSwQueueMax; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxSwQueueMax + - pAC->Pnmi.Port[1].TxSwQueueMax; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_TX_RETRY: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxRetryCts + - pAC->Pnmi.BufPort[1].TxRetryCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxRetryCts + - pAC->Pnmi.Port[1].TxRetryCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RX_INTR_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].RxIntrCts + - pAC->Pnmi.BufPort[1].RxIntrCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].RxIntrCts + - pAC->Pnmi.Port[1].RxIntrCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_TX_INTR_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxIntrCts + - pAC->Pnmi.BufPort[1].TxIntrCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxIntrCts + - pAC->Pnmi.Port[1].TxIntrCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RX_NO_BUF_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts + - pAC->Pnmi.BufPort[1].RxNoBufCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].RxNoBufCts + - pAC->Pnmi.Port[1].RxNoBufCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_TX_NO_BUF_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts + - pAC->Pnmi.BufPort[1].TxNoBufCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxNoBufCts + - pAC->Pnmi.Port[1].TxNoBufCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_TX_USED_DESCR_NO: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo + - pAC->Pnmi.BufPort[1].TxUsedDescrNo; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo + - pAC->Pnmi.Port[1].TxUsedDescrNo; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RX_DELIVERED_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts + - pAC->Pnmi.BufPort[1].RxDeliveredCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].RxDeliveredCts + - pAC->Pnmi.Port[1].RxDeliveredCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RX_OCTETS_DELIV_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts + - pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts + - pAC->Pnmi.Port[1].RxOctetsDeliveredCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RX_HW_ERROR_CTS: - SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_TX_HW_ERROR_CTS: - SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_IN_ERRORS_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; - } - /* Single net mode */ - else { - Val64 = Val64RxHwErrs + - pAC->Pnmi.BufPort[0].RxNoBufCts + - pAC->Pnmi.BufPort[1].RxNoBufCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; - } - /* Single net mode */ - else { - Val64 = Val64RxHwErrs + - pAC->Pnmi.Port[0].RxNoBufCts + - pAC->Pnmi.Port[1].RxNoBufCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_OUT_ERROR_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; - } - /* Single net mode */ - else { - Val64 = Val64TxHwErrs + - pAC->Pnmi.BufPort[0].TxNoBufCts + - pAC->Pnmi.BufPort[1].TxNoBufCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; - } - /* Single net mode */ - else { - Val64 = Val64TxHwErrs + - pAC->Pnmi.Port[0].TxNoBufCts + - pAC->Pnmi.Port[1].TxNoBufCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_ERR_RECOVERY_CTS: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts + - pAC->Pnmi.BufPort[1].ErrRecoveryCts; - } - } - else { - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts; - } - /* Single net mode */ - else { - Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts + - pAC->Pnmi.Port[1].ErrRecoveryCts; - } - } - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_SYSUPTIME: - Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); - Val64 -= pAC->Pnmi.StartUpTime; - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_MDB_VERSION: - Val32 = SK_PNMI_MDB_VERSION; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_GEN_RCV_ERROR: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; - } - else { - Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; - } - - /* - * by default 32bit values are evaluated - */ - if (!Is64BitReq) { - Val32 = (SK_U32)Val64; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - } - else { - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - } - break; - - case OID_GEN_XMIT_ERROR: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; - } - else { - Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; - } - - /* - * by default 32bit values are evaluated - */ - if (!Is64BitReq) { - Val32 = (SK_U32)Val64; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - } - else { - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - } - break; - - case OID_GEN_RCV_NO_BUFFER: - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; - } - else { - Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; - } - - /* - * by default 32bit values are evaluated - */ - if (!Is64BitReq) { - Val32 = (SK_U32)Val64; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - } - else { - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - } - break; - - case OID_GEN_TRANSMIT_QUEUE_LENGTH: - Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034, - SK_PNMI_ERR034MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - if (Id == OID_SKGE_RX_HW_ERROR_CTS || - Id == OID_SKGE_TX_HW_ERROR_CTS || - Id == OID_SKGE_IN_ERRORS_CTS || - Id == OID_SKGE_OUT_ERROR_CTS || - Id == OID_GEN_XMIT_ERROR || - Id == OID_GEN_RCV_ERROR) { - - pAC->Pnmi.MacUpdatedFlag --; - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance. - * - * Description: - * Get/Presets/Sets the RLMT OIDs. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Rlmt( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - int Ret; - unsigned int PhysPortIndex; - unsigned int PhysPortMax; - SK_EVPARA EventParam; - SK_U32 Val32; - SK_U64 Val64; - - - /* - * Check instance. Only single instance OIDs are allowed here. - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - /* - * Perform the requested action. - */ - if (Action == SK_PNMI_GET) { - - /* - * Check if the buffer length is large enough. - */ - - switch (Id) { - - case OID_SKGE_RLMT_MODE: - case OID_SKGE_RLMT_PORT_ACTIVE: - case OID_SKGE_RLMT_PORT_PREFERRED: - if (*pLen < sizeof(SK_U8)) { - - *pLen = sizeof(SK_U8); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_RLMT_PORT_NUMBER: - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_RLMT_CHANGE_CTS: - case OID_SKGE_RLMT_CHANGE_TIME: - case OID_SKGE_RLMT_CHANGE_ESTIM: - case OID_SKGE_RLMT_CHANGE_THRES: - if (*pLen < sizeof(SK_U64)) { - - *pLen = sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035, - SK_PNMI_ERR035MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Update RLMT statistic and increment semaphores to indicate - * that an update was already done. Maybe RLMT will hold its - * statistic always up to date some time. Then we can - * remove this type of call. - */ - if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.RlmtUpdatedFlag ++; - - /* - * Retrieve Value - */ - switch (Id) { - - case OID_SKGE_RLMT_MODE: - *pBuf = (char)pAC->Rlmt.Net[0].RlmtMode; - *pLen = sizeof(char); - break; - - case OID_SKGE_RLMT_PORT_NUMBER: - Val32 = (SK_U32)pAC->GIni.GIMacsFound; - SK_PNMI_STORE_U32(pBuf, Val32); - *pLen = sizeof(SK_U32); - break; - - case OID_SKGE_RLMT_PORT_ACTIVE: - *pBuf = 0; - /* - * If multiple ports may become active this OID - * doesn't make sense any more. A new variable in - * the port structure should be created. However, - * for this variable the first active port is - * returned. - */ - PhysPortMax = pAC->GIni.GIMacsFound; - - for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex); - break; - } - } - *pLen = sizeof(char); - break; - - case OID_SKGE_RLMT_PORT_PREFERRED: - *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference); - *pLen = sizeof(char); - break; - - case OID_SKGE_RLMT_CHANGE_CTS: - Val64 = pAC->Pnmi.RlmtChangeCts; - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_CHANGE_TIME: - Val64 = pAC->Pnmi.RlmtChangeTime; - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_CHANGE_ESTIM: - Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate; - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_CHANGE_THRES: - Val64 = pAC->Pnmi.RlmtChangeThreshold; - SK_PNMI_STORE_U64(pBuf, Val64); - *pLen = sizeof(SK_U64); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("Rlmt: Unknown OID should be handled before")); - - pAC->Pnmi.RlmtUpdatedFlag --; - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - pAC->Pnmi.RlmtUpdatedFlag --; - } - else { - /* Perform a preset or set */ - switch (Id) { - - case OID_SKGE_RLMT_MODE: - /* Check if the buffer length is plausible */ - if (*pLen < sizeof(char)) { - - *pLen = sizeof(char); - return (SK_PNMI_ERR_TOO_SHORT); - } - /* Check if the value range is correct */ - if (*pLen != sizeof(char) || - (*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 || - *(SK_U8 *)pBuf > 15) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - *pLen = 0; - return (SK_PNMI_ERR_OK); - } - /* Send an event to RLMT to change the mode */ - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - EventParam.Para32[0] |= (SK_U32)(*pBuf); - EventParam.Para32[1] = 0; - if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037, - SK_PNMI_ERR037MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - break; - - case OID_SKGE_RLMT_PORT_PREFERRED: - /* Check if the buffer length is plausible */ - if (*pLen < sizeof(char)) { - - *pLen = sizeof(char); - return (SK_PNMI_ERR_TOO_SHORT); - } - /* Check if the value range is correct */ - if (*pLen != sizeof(char) || *(SK_U8 *)pBuf > - (SK_U8)pAC->GIni.GIMacsFound) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - *pLen = 0; - return (SK_PNMI_ERR_OK); - } - - /* - * Send an event to RLMT change the preferred port. - * A param of -1 means automatic mode. RLMT will - * make the decision which is the preferred port. - */ - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - EventParam.Para32[0] = (SK_U32)(*pBuf) - 1; - EventParam.Para32[1] = NetIndex; - if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038, - SK_PNMI_ERR038MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - break; - - case OID_SKGE_RLMT_CHANGE_THRES: - /* Check if the buffer length is plausible */ - if (*pLen < sizeof(SK_U64)) { - - *pLen = sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - /* - * There are not many restrictions to the - * value range. - */ - if (*pLen != sizeof(SK_U64)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - /* A preset ends here */ - if (Action == SK_PNMI_PRESET) { - - *pLen = 0; - return (SK_PNMI_ERR_OK); - } - /* - * Store the new threshold, which will be taken - * on the next timer event. - */ - SK_PNMI_READ_U64(pBuf, Val64); - pAC->Pnmi.RlmtChangeThreshold = Val64; - break; - - default: - /* The other OIDs are not be able for set */ - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance. - * - * Description: - * Performs get requests on multiple instance variables. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int RlmtStat( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int PhysPortMax; - unsigned int PhysPortIndex; - unsigned int Limit; - unsigned int Offset; - int Ret; - SK_U32 Val32; - SK_U64 Val64; - - /* - * Calculate the port indexes from the instance. - */ - PhysPortMax = pAC->GIni.GIMacsFound; - - if ((Instance != (SK_U32)(-1))) { - /* Check instance range */ - if ((Instance < 1) || (Instance > PhysPortMax)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - /* Single net mode */ - PhysPortIndex = Instance - 1; - - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - PhysPortIndex = NetIndex; - } - - /* Both net modes */ - Limit = PhysPortIndex + 1; - } - else { - /* Single net mode */ - PhysPortIndex = 0; - Limit = PhysPortMax; - - /* Dual net mode */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - PhysPortIndex = NetIndex; - Limit = PhysPortIndex + 1; - } - } - - /* - * Currently only get requests are allowed. - */ - if (Action != SK_PNMI_GET) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* - * Check if the buffer length is large enough. - */ - switch (Id) { - - case OID_SKGE_RLMT_PORT_INDEX: - case OID_SKGE_RLMT_STATUS: - if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { - - *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_RLMT_TX_HELLO_CTS: - case OID_SKGE_RLMT_RX_HELLO_CTS: - case OID_SKGE_RLMT_TX_SP_REQ_CTS: - case OID_SKGE_RLMT_RX_SP_CTS: - if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) { - - *pLen = (Limit - PhysPortIndex) * sizeof(SK_U64); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039, - SK_PNMI_ERR039MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - - } - - /* - * Update statistic and increment semaphores to indicate that - * an update was already done. - */ - if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.RlmtUpdatedFlag ++; - - /* - * Get value - */ - Offset = 0; - for (; PhysPortIndex < Limit; PhysPortIndex ++) { - - switch (Id) { - - case OID_SKGE_RLMT_PORT_INDEX: - Val32 = PhysPortIndex; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_RLMT_STATUS: - if (pAC->Rlmt.Port[PhysPortIndex].PortState == - SK_RLMT_PS_INIT || - pAC->Rlmt.Port[PhysPortIndex].PortState == - SK_RLMT_PS_DOWN) { - - Val32 = SK_PNMI_RLMT_STATUS_ERROR; - } - else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - Val32 = SK_PNMI_RLMT_STATUS_ACTIVE; - } - else { - Val32 = SK_PNMI_RLMT_STATUS_STANDBY; - } - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_RLMT_TX_HELLO_CTS: - Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_RX_HELLO_CTS: - Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_TX_SP_REQ_CTS: - Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - case OID_SKGE_RLMT_RX_SP_CTS: - Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts; - SK_PNMI_STORE_U64(pBuf + Offset, Val64); - Offset += sizeof(SK_U64); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("RlmtStat: Unknown OID should be errored before")); - - pAC->Pnmi.RlmtUpdatedFlag --; - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - *pLen = Offset; - - pAC->Pnmi.RlmtUpdatedFlag --; - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * MacPrivateConf - OID handler function of OIDs concerning the configuration - * - * Description: - * Get/Presets/Sets the OIDs concerning the configuration. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int MacPrivateConf( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int PhysPortMax; - unsigned int PhysPortIndex; - unsigned int LogPortMax; - unsigned int LogPortIndex; - unsigned int Limit; - unsigned int Offset; - char Val8; - char *pBufPtr; - int Ret; - SK_EVPARA EventParam; - SK_U32 Val32; - - /* - * Calculate instance if wished. MAC index 0 is the virtual MAC. - */ - PhysPortMax = pAC->GIni.GIMacsFound; - LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); - - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ - LogPortMax--; - } - - if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ - /* Check instance range */ - if ((Instance < 1) || (Instance > LogPortMax)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); - Limit = LogPortIndex + 1; - } - - else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ - - LogPortIndex = 0; - Limit = LogPortMax; - } - - /* - * Perform action - */ - if (Action == SK_PNMI_GET) { - - /* Check length */ - switch (Id) { - - case OID_SKGE_PMD: - case OID_SKGE_CONNECTOR: - case OID_SKGE_LINK_CAP: - case OID_SKGE_LINK_MODE: - case OID_SKGE_LINK_MODE_STATUS: - case OID_SKGE_LINK_STATUS: - case OID_SKGE_FLOWCTRL_CAP: - case OID_SKGE_FLOWCTRL_MODE: - case OID_SKGE_FLOWCTRL_STATUS: - case OID_SKGE_PHY_OPERATION_CAP: - case OID_SKGE_PHY_OPERATION_MODE: - case OID_SKGE_PHY_OPERATION_STATUS: - case OID_SKGE_SPEED_CAP: - case OID_SKGE_SPEED_MODE: - case OID_SKGE_SPEED_STATUS: - if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) { - - *pLen = (Limit - LogPortIndex) * sizeof(SK_U8); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_MTU: - case OID_SKGE_PHY_TYPE: - if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U32)) { - - *pLen = (Limit - LogPortIndex) * sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041, - SK_PNMI_ERR041MSG); - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Update statistic and increment semaphore to indicate - * that an update was already done. - */ - if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { - - *pLen = 0; - return (Ret); - } - pAC->Pnmi.SirqUpdatedFlag ++; - - /* - * Get value - */ - Offset = 0; - for (; LogPortIndex < Limit; LogPortIndex ++) { - - pBufPtr = pBuf + Offset; - - switch (Id) { - - case OID_SKGE_PMD: - *pBufPtr = pAC->Pnmi.PMD; - Offset += sizeof(char); - break; - - case OID_SKGE_CONNECTOR: - *pBufPtr = pAC->Pnmi.Connector; - Offset += sizeof(char); - break; - - case OID_SKGE_PHY_TYPE: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - continue; - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - Val32 = pAC->GIni.GP[PhysPortIndex].PhyType; - SK_PNMI_STORE_U32(pBufPtr, Val32); - } - } - else { /* DualNetMode */ - - Val32 = pAC->GIni.GP[NetIndex].PhyType; - SK_PNMI_STORE_U32(pBufPtr, Val32); - } - Offset += sizeof(SK_U32); - break; - - case OID_SKGE_LINK_CAP: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkCap; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PLinkCap; - } - Offset += sizeof(char); - break; - - case OID_SKGE_LINK_MODE: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkModeConf; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PLinkModeConf; - } - Offset += sizeof(char); - break; - - case OID_SKGE_LINK_MODE_STATUS: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = - CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); - } - } - else { /* DualNetMode */ - - *pBufPtr = CalculateLinkModeStatus(pAC, IoC, NetIndex); - } - Offset += sizeof(char); - break; - - case OID_SKGE_LINK_STATUS: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = CalculateLinkStatus(pAC, IoC, PhysPortIndex); - } - } - else { /* DualNetMode */ - - *pBufPtr = CalculateLinkStatus(pAC, IoC, NetIndex); - } - Offset += sizeof(char); - break; - - case OID_SKGE_FLOWCTRL_CAP: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlCap; - } - Offset += sizeof(char); - break; - - case OID_SKGE_FLOWCTRL_MODE: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlMode; - } - Offset += sizeof(char); - break; - - case OID_SKGE_FLOWCTRL_STATUS: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlStatus; - } - Offset += sizeof(char); - break; - - case OID_SKGE_PHY_OPERATION_CAP: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSCap; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PMSCap; - } - Offset += sizeof(char); - break; - - case OID_SKGE_PHY_OPERATION_MODE: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSMode; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PMSMode; - } - Offset += sizeof(char); - break; - - case OID_SKGE_PHY_OPERATION_STATUS: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSStatus; - } - } - else { - - *pBufPtr = pAC->GIni.GP[NetIndex].PMSStatus; - } - Offset += sizeof(char); - break; - - case OID_SKGE_SPEED_CAP: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical ports */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedCap; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedCap; - } - Offset += sizeof(char); - break; - - case OID_SKGE_SPEED_MODE: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeed; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeed; - } - Offset += sizeof(char); - break; - - case OID_SKGE_SPEED_STATUS: - if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ - if (LogPortIndex == 0) { - /* Get value for virtual port */ - VirtualConf(pAC, IoC, Id, pBufPtr); - } - else { - /* Get value for physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - - *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; - } - } - else { /* DualNetMode */ - - *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedUsed; - } - Offset += sizeof(char); - break; - - case OID_SKGE_MTU: - Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex); - SK_PNMI_STORE_U32(pBufPtr, Val32); - Offset += sizeof(SK_U32); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("MacPrivateConf: Unknown OID should be handled before")); - - pAC->Pnmi.SirqUpdatedFlag --; - return (SK_PNMI_ERR_GENERAL); - } - } - *pLen = Offset; - pAC->Pnmi.SirqUpdatedFlag --; - - return (SK_PNMI_ERR_OK); - } - - /* - * From here SET or PRESET action. Check if the passed - * buffer length is plausible. - */ - switch (Id) { - - case OID_SKGE_LINK_MODE: - case OID_SKGE_FLOWCTRL_MODE: - case OID_SKGE_PHY_OPERATION_MODE: - case OID_SKGE_SPEED_MODE: - if (*pLen < Limit - LogPortIndex) { - - *pLen = Limit - LogPortIndex; - return (SK_PNMI_ERR_TOO_SHORT); - } - if (*pLen != Limit - LogPortIndex) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - break; - - case OID_SKGE_MTU: - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - if (*pLen != sizeof(SK_U32)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* - * Perform preset or set - */ - Offset = 0; - for (; LogPortIndex < Limit; LogPortIndex ++) { - - switch (Id) { - - case OID_SKGE_LINK_MODE: - /* Check the value range */ - Val8 = *(pBuf + Offset); - if (Val8 == 0) { - - Offset += sizeof(char); - break; - } - if (Val8 < SK_LMODE_HALF || - (LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) || - (LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - if (LogPortIndex == 0) { - - /* - * The virtual port consists of all currently - * active ports. Find them and send an event - * with the new link mode to SIRQ. - */ - for (PhysPortIndex = 0; - PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (!pAC->Pnmi.Port[PhysPortIndex]. - ActiveFlag) { - - continue; - } - - EventParam.Para32[0] = PhysPortIndex; - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_LMODE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR043, - SK_PNMI_ERR043MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - } - else { - /* - * Send an event with the new link mode to - * the SIRQ module. - */ - EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR043, - SK_PNMI_ERR043MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - Offset += sizeof(char); - break; - - case OID_SKGE_FLOWCTRL_MODE: - /* Check the value range */ - Val8 = *(pBuf + Offset); - if (Val8 == 0) { - - Offset += sizeof(char); - break; - } - if (Val8 < SK_FLOW_MODE_NONE || - (LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) || - (LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - if (LogPortIndex == 0) { - - /* - * The virtual port consists of all currently - * active ports. Find them and send an event - * with the new flow control mode to SIRQ. - */ - for (PhysPortIndex = 0; - PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (!pAC->Pnmi.Port[PhysPortIndex]. - ActiveFlag) { - - continue; - } - - EventParam.Para32[0] = PhysPortIndex; - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_FLOWMODE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR044, - SK_PNMI_ERR044MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - } - else { - /* - * Send an event with the new flow control - * mode to the SIRQ module. - */ - EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_FLOWMODE, EventParam) - > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR044, - SK_PNMI_ERR044MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - Offset += sizeof(char); - break; - - case OID_SKGE_PHY_OPERATION_MODE : - /* Check the value range */ - Val8 = *(pBuf + Offset); - if (Val8 == 0) { - /* mode of this port remains unchanged */ - Offset += sizeof(char); - break; - } - if (Val8 < SK_MS_MODE_AUTO || - (LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) || - (LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - if (LogPortIndex == 0) { - - /* - * The virtual port consists of all currently - * active ports. Find them and send an event - * with new master/slave (role) mode to SIRQ. - */ - for (PhysPortIndex = 0; - PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (!pAC->Pnmi.Port[PhysPortIndex]. - ActiveFlag) { - - continue; - } - - EventParam.Para32[0] = PhysPortIndex; - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_ROLE, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR042, - SK_PNMI_ERR042MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - } - else { - /* - * Send an event with the new master/slave - * (role) mode to the SIRQ module. - */ - EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_ROLE, EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR042, - SK_PNMI_ERR042MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - - Offset += sizeof(char); - break; - - case OID_SKGE_SPEED_MODE: - /* Check the value range */ - Val8 = *(pBuf + Offset); - if (Val8 == 0) { - - Offset += sizeof(char); - break; - } - if (Val8 < (SK_LSPEED_AUTO) || - (LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) || - (LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - - return (SK_PNMI_ERR_OK); - } - - if (LogPortIndex == 0) { - - /* - * The virtual port consists of all currently - * active ports. Find them and send an event - * with the new flow control mode to SIRQ. - */ - for (PhysPortIndex = 0; - PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - continue; - } - - EventParam.Para32[0] = PhysPortIndex; - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_SPEED, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR045, - SK_PNMI_ERR045MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - } - else { - /* - * Send an event with the new flow control - * mode to the SIRQ module. - */ - EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( - pAC, LogPortIndex); - EventParam.Para32[1] = (SK_U32)Val8; - if (SkGeSirqEvent(pAC, IoC, - SK_HWEV_SET_SPEED, - EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, - SK_PNMI_ERR045, - SK_PNMI_ERR045MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - Offset += sizeof(char); - break; - - case OID_SKGE_MTU : - /* Check the value range */ - Val32 = *(SK_U32*)(pBuf + Offset); - if (Val32 == 0) { - /* mtu of this port remains unchanged */ - Offset += sizeof(SK_U32); - break; - } - if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) { - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - /* The preset ends here */ - if (Action == SK_PNMI_PRESET) { - return (SK_PNMI_ERR_OK); - } - - if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) { - return (SK_PNMI_ERR_GENERAL); - } - - Offset += sizeof(SK_U32); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("MacPrivateConf: Unknown OID should be handled before set")); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * Monitor - OID handler function for RLMT_MONITOR_XXX - * - * Description: - * Because RLMT currently does not support the monitoring of - * remote adapter cards, we return always an empty table. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid - * value range. - * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -PNMI_STATIC int Monitor( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - unsigned int Index; - unsigned int Limit; - unsigned int Offset; - unsigned int Entries; - - - /* - * Calculate instance if wished. - */ - /* XXX Not yet implemented. Return always an empty table. */ - Entries = 0; - - if ((Instance != (SK_U32)(-1))) { - - if ((Instance < 1) || (Instance > Entries)) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - Index = (unsigned int)Instance - 1; - Limit = (unsigned int)Instance; - } - else { - Index = 0; - Limit = Entries; - } - - /* - * Get/Set value - */ - if (Action == SK_PNMI_GET) { - - for (Offset=0; Index < Limit; Index ++) { - - switch (Id) { - - case OID_SKGE_RLMT_MONITOR_INDEX: - case OID_SKGE_RLMT_MONITOR_ADDR: - case OID_SKGE_RLMT_MONITOR_ERRS: - case OID_SKGE_RLMT_MONITOR_TIMESTAMP: - case OID_SKGE_RLMT_MONITOR_ADMIN: - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046, - SK_PNMI_ERR046MSG); - - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } - *pLen = Offset; - } - else { - /* Only MONITOR_ADMIN can be set */ - if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) { - - *pLen = 0; - return (SK_PNMI_ERR_READ_ONLY); - } - - /* Check if the length is plausible */ - if (*pLen < (Limit - Index)) { - - return (SK_PNMI_ERR_TOO_SHORT); - } - /* Okay, we have a wide value range */ - if (*pLen != (Limit - Index)) { - - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } -/* - for (Offset=0; Index < Limit; Index ++) { - } -*/ -/* - * XXX Not yet implemented. Return always BAD_VALUE, because the table - * is empty. - */ - *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * VirtualConf - Calculates the values of configuration OIDs for virtual port - * - * Description: - * We handle here the get of the configuration group OIDs, which are - * a little bit complicated. The virtual port consists of all currently - * active physical ports. If multiple ports are active and configured - * differently we get in some trouble to return a single value. So we - * get the value of the first active port and compare it with that of - * the other active ports. If they are not the same, we return a value - * that indicates that the state is indeterminated. - * - * Returns: - * Nothing - */ -PNMI_STATIC void VirtualConf( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf) /* Buffer used for the management data transfer */ -{ - unsigned int PhysPortMax; - unsigned int PhysPortIndex; - SK_U8 Val8; - SK_U32 Val32; - SK_BOOL PortActiveFlag; - SK_GEPORT *pPrt; - - *pBuf = 0; - PortActiveFlag = SK_FALSE; - PhysPortMax = pAC->GIni.GIMacsFound; - - for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - pPrt = &pAC->GIni.GP[PhysPortIndex]; - - /* Check if the physical port is active */ - if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - continue; - } - - PortActiveFlag = SK_TRUE; - - switch (Id) { - - case OID_SKGE_PHY_TYPE: - /* Check if it is the first active port */ - if (*pBuf == 0) { - Val32 = pPrt->PhyType; - SK_PNMI_STORE_U32(pBuf, Val32); - continue; - } - - case OID_SKGE_LINK_CAP: - - /* - * Different capabilities should not happen, but - * in the case of the cases OR them all together. - * From a curious point of view the virtual port - * is capable of all found capabilities. - */ - *pBuf |= pPrt->PLinkCap; - break; - - case OID_SKGE_LINK_MODE: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PLinkModeConf; - continue; - } - - /* - * If we find an active port with a different link - * mode than the first one we return a value that - * indicates that the link mode is indeterminated. - */ - if (*pBuf != pPrt->PLinkModeConf) { - - *pBuf = SK_LMODE_INDETERMINATED; - } - break; - - case OID_SKGE_LINK_MODE_STATUS: - /* Get the link mode of the physical port */ - Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); - - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = Val8; - continue; - } - - /* - * If we find an active port with a different link - * mode status than the first one we return a value - * that indicates that the link mode status is - * indeterminated. - */ - if (*pBuf != Val8) { - - *pBuf = SK_LMODE_STAT_INDETERMINATED; - } - break; - - case OID_SKGE_LINK_STATUS: - /* Get the link status of the physical port */ - Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex); - - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = Val8; - continue; - } - - /* - * If we find an active port with a different link - * status than the first one, we return a value - * that indicates that the link status is - * indeterminated. - */ - if (*pBuf != Val8) { - - *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; - } - break; - - case OID_SKGE_FLOWCTRL_CAP: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PFlowCtrlCap; - continue; - } - - /* - * From a curious point of view the virtual port - * is capable of all found capabilities. - */ - *pBuf |= pPrt->PFlowCtrlCap; - break; - - case OID_SKGE_FLOWCTRL_MODE: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PFlowCtrlMode; - continue; - } - - /* - * If we find an active port with a different flow - * control mode than the first one, we return a value - * that indicates that the mode is indeterminated. - */ - if (*pBuf != pPrt->PFlowCtrlMode) { - - *pBuf = SK_FLOW_MODE_INDETERMINATED; - } - break; - - case OID_SKGE_FLOWCTRL_STATUS: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PFlowCtrlStatus; - continue; - } - - /* - * If we find an active port with a different flow - * control status than the first one, we return a - * value that indicates that the status is - * indeterminated. - */ - if (*pBuf != pPrt->PFlowCtrlStatus) { - - *pBuf = SK_FLOW_STAT_INDETERMINATED; - } - break; - - case OID_SKGE_PHY_OPERATION_CAP: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PMSCap; - continue; - } - - /* - * From a curious point of view the virtual port - * is capable of all found capabilities. - */ - *pBuf |= pPrt->PMSCap; - break; - - case OID_SKGE_PHY_OPERATION_MODE: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PMSMode; - continue; - } - - /* - * If we find an active port with a different master/ - * slave mode than the first one, we return a value - * that indicates that the mode is indeterminated. - */ - if (*pBuf != pPrt->PMSMode) { - - *pBuf = SK_MS_MODE_INDETERMINATED; - } - break; - - case OID_SKGE_PHY_OPERATION_STATUS: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PMSStatus; - continue; - } - - /* - * If we find an active port with a different master/ - * slave status than the first one, we return a - * value that indicates that the status is - * indeterminated. - */ - if (*pBuf != pPrt->PMSStatus) { - - *pBuf = SK_MS_STAT_INDETERMINATED; - } - break; - - case OID_SKGE_SPEED_MODE: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PLinkSpeed; - continue; - } - - /* - * If we find an active port with a different flow - * control mode than the first one, we return a value - * that indicates that the mode is indeterminated. - */ - if (*pBuf != pPrt->PLinkSpeed) { - - *pBuf = SK_LSPEED_INDETERMINATED; - } - break; - - case OID_SKGE_SPEED_STATUS: - /* Check if it is the first active port */ - if (*pBuf == 0) { - - *pBuf = pPrt->PLinkSpeedUsed; - continue; - } - - /* - * If we find an active port with a different flow - * control status than the first one, we return a - * value that indicates that the status is - * indeterminated. - */ - if (*pBuf != pPrt->PLinkSpeedUsed) { - - *pBuf = SK_LSPEED_STAT_INDETERMINATED; - } - break; - } - } - - /* - * If no port is active return an indeterminated answer - */ - if (!PortActiveFlag) { - - switch (Id) { - - case OID_SKGE_LINK_CAP: - *pBuf = SK_LMODE_CAP_INDETERMINATED; - break; - - case OID_SKGE_LINK_MODE: - *pBuf = SK_LMODE_INDETERMINATED; - break; - - case OID_SKGE_LINK_MODE_STATUS: - *pBuf = SK_LMODE_STAT_INDETERMINATED; - break; - - case OID_SKGE_LINK_STATUS: - *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; - break; - - case OID_SKGE_FLOWCTRL_CAP: - case OID_SKGE_FLOWCTRL_MODE: - *pBuf = SK_FLOW_MODE_INDETERMINATED; - break; - - case OID_SKGE_FLOWCTRL_STATUS: - *pBuf = SK_FLOW_STAT_INDETERMINATED; - break; - - case OID_SKGE_PHY_OPERATION_CAP: - *pBuf = SK_MS_CAP_INDETERMINATED; - break; - - case OID_SKGE_PHY_OPERATION_MODE: - *pBuf = SK_MS_MODE_INDETERMINATED; - break; - - case OID_SKGE_PHY_OPERATION_STATUS: - *pBuf = SK_MS_STAT_INDETERMINATED; - break; - case OID_SKGE_SPEED_CAP: - *pBuf = SK_LSPEED_CAP_INDETERMINATED; - break; - - case OID_SKGE_SPEED_MODE: - *pBuf = SK_LSPEED_INDETERMINATED; - break; - - case OID_SKGE_SPEED_STATUS: - *pBuf = SK_LSPEED_STAT_INDETERMINATED; - break; - } - } -} - -/***************************************************************************** - * - * CalculateLinkStatus - Determins the link status of a physical port - * - * Description: - * Determins the link status the following way: - * LSTAT_PHY_DOWN: Link is down - * LSTAT_AUTONEG: Auto-negotiation failed - * LSTAT_LOG_DOWN: Link is up but RLMT did not yet put the port - * logically up. - * LSTAT_LOG_UP: RLMT marked the port as up - * - * Returns: - * Link status of physical port - */ -PNMI_STATIC SK_U8 CalculateLinkStatus( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -unsigned int PhysPortIndex) /* Physical port index */ -{ - SK_U8 Result; - - if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) { - - Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN; - } - else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) { - - Result = SK_PNMI_RLMT_LSTAT_AUTONEG; - } - else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) { - - Result = SK_PNMI_RLMT_LSTAT_LOG_UP; - } - else { - Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN; - } - - return (Result); -} - -/***************************************************************************** - * - * CalculateLinkModeStatus - Determins the link mode status of a phys. port - * - * Description: - * The COMMON module only tells us if the mode is half or full duplex. - * But in the decade of auto sensing it is useful for the user to - * know if the mode was negotiated or forced. Therefore we have a - * look to the mode, which was last used by the negotiation process. - * - * Returns: - * The link mode status - */ -PNMI_STATIC SK_U8 CalculateLinkModeStatus( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -unsigned int PhysPortIndex) /* Physical port index */ -{ - SK_U8 Result; - - /* Get the current mode, which can be full or half duplex */ - Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus; - - /* Check if no valid mode could be found (link is down) */ - if (Result < SK_LMODE_STAT_HALF) { - - Result = SK_LMODE_STAT_UNKNOWN; - } - else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) { - - /* - * Auto-negotiation was used to bring up the link. Change - * the already found duplex status that it indicates - * auto-negotiation was involved. - */ - if (Result == SK_LMODE_STAT_HALF) { - - Result = SK_LMODE_STAT_AUTOHALF; - } - else if (Result == SK_LMODE_STAT_FULL) { - - Result = SK_LMODE_STAT_AUTOFULL; - } - } - - return (Result); -} - -/***************************************************************************** - * - * GetVpdKeyArr - Obtain an array of VPD keys - * - * Description: - * Read the VPD keys and build an array of VPD keys, which are - * easy to access. - * - * Returns: - * SK_PNMI_ERR_OK Task successfully performed. - * SK_PNMI_ERR_GENERAL Something went wrong. - */ -PNMI_STATIC int GetVpdKeyArr( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -char *pKeyArr, /* Ptr KeyArray */ -unsigned int KeyArrLen, /* Length of array in bytes */ -unsigned int *pKeyNo) /* Number of keys */ -{ - unsigned int BufKeysLen = SK_PNMI_VPD_BUFSIZE; - char BufKeys[SK_PNMI_VPD_BUFSIZE]; - unsigned int StartOffset; - unsigned int Offset; - int Index; - int Ret; - - - SK_MEMSET(pKeyArr, 0, KeyArrLen); - - /* - * Get VPD key list - */ - Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen, - (int *)pKeyNo); - if (Ret > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014, - SK_PNMI_ERR014MSG); - - return (SK_PNMI_ERR_GENERAL); - } - /* If no keys are available return now */ - if (*pKeyNo == 0 || BufKeysLen == 0) { - - return (SK_PNMI_ERR_OK); - } - /* - * If the key list is too long for us trunc it and give a - * errorlog notification. This case should not happen because - * the maximum number of keys is limited due to RAM limitations - */ - if (*pKeyNo > SK_PNMI_VPD_ENTRIES) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015, - SK_PNMI_ERR015MSG); - - *pKeyNo = SK_PNMI_VPD_ENTRIES; - } - - /* - * Now build an array of fixed string length size and copy - * the keys together. - */ - for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen; - Offset ++) { - - if (BufKeys[Offset] != 0) { - - continue; - } - - if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016, - SK_PNMI_ERR016MSG); - return (SK_PNMI_ERR_GENERAL); - } - - SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, - &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); - - Index ++; - StartOffset = Offset + 1; - } - - /* Last key not zero terminated? Get it anyway */ - if (StartOffset < Offset) { - - SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, - &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * SirqUpdate - Let the SIRQ update its internal values - * - * Description: - * Just to be sure that the SIRQ module holds its internal data - * structures up to date, we send an update event before we make - * any access. - * - * Returns: - * SK_PNMI_ERR_OK Task successfully performed. - * SK_PNMI_ERR_GENERAL Something went wrong. - */ -PNMI_STATIC int SirqUpdate( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC) /* IO context handle */ -{ - SK_EVPARA EventParam; - - - /* Was the module already updated during the current PNMI call? */ - if (pAC->Pnmi.SirqUpdatedFlag > 0) { - - return (SK_PNMI_ERR_OK); - } - - /* Send an synchronuous update event to the module */ - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047, - SK_PNMI_ERR047MSG); - - return (SK_PNMI_ERR_GENERAL); - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * RlmtUpdate - Let the RLMT update its internal values - * - * Description: - * Just to be sure that the RLMT module holds its internal data - * structures up to date, we send an update event before we make - * any access. - * - * Returns: - * SK_PNMI_ERR_OK Task successfully performed. - * SK_PNMI_ERR_GENERAL Something went wrong. - */ -PNMI_STATIC int RlmtUpdate( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ -{ - SK_EVPARA EventParam; - - - /* Was the module already updated during the current PNMI call? */ - if (pAC->Pnmi.RlmtUpdatedFlag > 0) { - - return (SK_PNMI_ERR_OK); - } - - /* Send an synchronuous update event to the module */ - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - EventParam.Para32[0] = NetIndex; - EventParam.Para32[1] = (SK_U32)-1; - if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048, - SK_PNMI_ERR048MSG); - - return (SK_PNMI_ERR_GENERAL); - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * MacUpdate - Force the XMAC to output the current statistic - * - * Description: - * The XMAC holds its statistic internally. To obtain the current - * values we must send a command so that the statistic data will - * be written to a predefined memory area on the adapter. - * - * Returns: - * SK_PNMI_ERR_OK Task successfully performed. - * SK_PNMI_ERR_GENERAL Something went wrong. - */ -PNMI_STATIC int MacUpdate( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -unsigned int FirstMac, /* Index of the first Mac to be updated */ -unsigned int LastMac) /* Index of the last Mac to be updated */ -{ - unsigned int MacIndex; - - /* - * Were the statistics already updated during the - * current PNMI call? - */ - if (pAC->Pnmi.MacUpdatedFlag > 0) { - - return (SK_PNMI_ERR_OK); - } - - /* Send an update command to all MACs specified */ - for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) { - - /* - * 2002-09-13 pweber: Freeze the current SW counters. - * (That should be done as close as - * possible to the update of the - * HW counters) - */ - if (pAC->GIni.GIMacType == SK_MAC_XMAC) { - pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex]; - } - - /* 2002-09-13 pweber: Update the HW counter */ - if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) { - - return (SK_PNMI_ERR_GENERAL); - } - } - - return (SK_PNMI_ERR_OK); -} - -/***************************************************************************** - * - * GetStatVal - Retrieve an XMAC statistic counter - * - * Description: - * Retrieves the statistic counter of a virtual or physical port. The - * virtual port is identified by the index 0. It consists of all - * currently active ports. To obtain the counter value for this port - * we must add the statistic counter of all active ports. To grant - * continuous counter values for the virtual port even when port - * switches occur we must additionally add a delta value, which was - * calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event. - * - * Returns: - * Requested statistic value - */ -PNMI_STATIC SK_U64 GetStatVal( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -unsigned int LogPortIndex, /* Index of the logical Port to be processed */ -unsigned int StatIndex, /* Index to statistic value */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ -{ - unsigned int PhysPortIndex; - unsigned int PhysPortMax; - SK_U64 Val = 0; - - - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ - - PhysPortIndex = NetIndex; - - Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); - } - else { /* Single Net mode */ - - if (LogPortIndex == 0) { - - PhysPortMax = pAC->GIni.GIMacsFound; - - /* Add counter of all active ports */ - for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; - PhysPortIndex ++) { - - if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { - - Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); - } - } - - /* Correct value because of port switches */ - Val += pAC->Pnmi.VirtualCounterOffset[StatIndex]; - } - else { - /* Get counter value of physical port */ - PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); - - Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); - } - } - return (Val); -} - -/***************************************************************************** - * - * GetPhysStatVal - Get counter value for physical port - * - * Description: - * Builds a 64bit counter value. Except for the octet counters - * the lower 32bit are counted in hardware and the upper 32bit - * in software by monitoring counter overflow interrupts in the - * event handler. To grant continous counter values during XMAC - * resets (caused by a workaround) we must add a delta value. - * The delta was calculated in the event handler when a - * SK_PNMI_EVT_XMAC_RESET was received. - * - * Returns: - * Counter value - */ -PNMI_STATIC SK_U64 GetPhysStatVal( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -unsigned int PhysPortIndex, /* Index of the logical Port to be processed */ -unsigned int StatIndex) /* Index to statistic value */ -{ - SK_U64 Val = 0; - SK_U32 LowVal = 0; - SK_U32 HighVal = 0; - SK_U16 Word; - int MacType; - unsigned int HelpIndex; - SK_GEPORT *pPrt; - - SK_PNMI_PORT *pPnmiPrt; - SK_GEMACFUNC *pFnMac; - - pPrt = &pAC->GIni.GP[PhysPortIndex]; - - MacType = pAC->GIni.GIMacType; - - /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ - if (MacType == SK_MAC_XMAC) { - pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex]; - } - else { - pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex]; - } - - pFnMac = &pAC->GIni.GIFunc; - - switch (StatIndex) { - case SK_PNMI_HTX: - if (MacType == SK_MAC_GMAC) { - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HTX_BROADCAST][MacType].Reg, - &LowVal); - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HTX_MULTICAST][MacType].Reg, - &HighVal); - LowVal += HighVal; - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HTX_UNICAST][MacType].Reg, - &HighVal); - LowVal += HighVal; - } - else { - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - } - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HRX: - if (MacType == SK_MAC_GMAC) { - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HRX_BROADCAST][MacType].Reg, - &LowVal); - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HRX_MULTICAST][MacType].Reg, - &HighVal); - LowVal += HighVal; - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[SK_PNMI_HRX_UNICAST][MacType].Reg, - &HighVal); - LowVal += HighVal; - } - else { - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - } - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HTX_OCTET: - case SK_PNMI_HRX_OCTET: - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &HighVal); - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex + 1][MacType].Reg, - &LowVal); - break; - - case SK_PNMI_HTX_BURST: - case SK_PNMI_HTX_EXCESS_DEF: - case SK_PNMI_HTX_CARRIER: - /* Not supported by GMAC */ - if (MacType == SK_MAC_GMAC) { - return (Val); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HTX_MACC: - /* GMAC only supports PAUSE MAC control frames */ - if (MacType == SK_MAC_GMAC) { - HelpIndex = SK_PNMI_HTX_PMACC; - } - else { - HelpIndex = StatIndex; - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[HelpIndex][MacType].Reg, - &LowVal); - - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HTX_COL: - case SK_PNMI_HRX_UNDERSIZE: - /* Not supported by XMAC */ - if (MacType == SK_MAC_XMAC) { - return (Val); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HTX_DEFFERAL: - /* Not supported by GMAC */ - if (MacType == SK_MAC_GMAC) { - return (Val); - } - - /* - * XMAC counts frames with deferred transmission - * even in full-duplex mode. - * - * In full-duplex mode the counter remains constant! - */ - if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) || - (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL)) { - - LowVal = 0; - HighVal = 0; - } - else { - /* Otherwise get contents of hardware register */ - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - } - break; - - case SK_PNMI_HRX_BADOCTET: - /* Not supported by XMAC */ - if (MacType == SK_MAC_XMAC) { - return (Val); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &HighVal); - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex + 1][MacType].Reg, - &LowVal); - break; - - case SK_PNMI_HTX_OCTETLOW: - case SK_PNMI_HRX_OCTETLOW: - case SK_PNMI_HRX_BADOCTETLOW: - return (Val); - - case SK_PNMI_HRX_LONGFRAMES: - /* For XMAC the SW counter is managed by PNMI */ - if (MacType == SK_MAC_XMAC) { - return (pPnmiPrt->StatRxLongFrameCts); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HRX_TOO_LONG: - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - - Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); - - if (MacType == SK_MAC_GMAC) { - /* For GMAC the SW counter is additionally managed by PNMI */ - Val += pPnmiPrt->StatRxFrameTooLongCts; - } - else { - /* - * Frames longer than IEEE 802.3 frame max size are counted - * by XMAC in frame_too_long counter even reception of long - * frames was enabled and the frame was correct. - * So correct the value by subtracting RxLongFrame counter. - */ - Val -= pPnmiPrt->StatRxLongFrameCts; - } - - LowVal = (SK_U32)Val; - HighVal = (SK_U32)(Val >> 32); - break; - - case SK_PNMI_HRX_SHORTS: - /* Not supported by GMAC */ - if (MacType == SK_MAC_GMAC) { - /* GM_RXE_FRAG?? */ - return (Val); - } - - /* - * XMAC counts short frame errors even if link down (#10620) - * - * If link-down the counter remains constant - */ - if (pPrt->PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) { - - /* Otherwise get incremental difference */ - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - - Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); - Val -= pPnmiPrt->RxShortZeroMark; - - LowVal = (SK_U32)Val; - HighVal = (SK_U32)(Val >> 32); - } - break; - - case SK_PNMI_HRX_MACC: - case SK_PNMI_HRX_MACC_UNKWN: - case SK_PNMI_HRX_BURST: - case SK_PNMI_HRX_MISSED: - case SK_PNMI_HRX_FRAMING: - case SK_PNMI_HRX_CARRIER: - case SK_PNMI_HRX_IRLENGTH: - case SK_PNMI_HRX_SYMBOL: - case SK_PNMI_HRX_CEXT: - /* Not supported by GMAC */ - if (MacType == SK_MAC_GMAC) { - return (Val); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - case SK_PNMI_HRX_PMACC_ERR: - /* For GMAC the SW counter is managed by PNMI */ - if (MacType == SK_MAC_GMAC) { - return (pPnmiPrt->StatRxPMaccErr); - } - - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - - /* SW counter managed by PNMI */ - case SK_PNMI_HTX_SYNC: - LowVal = (SK_U32)pPnmiPrt->StatSyncCts; - HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32); - break; - - /* SW counter managed by PNMI */ - case SK_PNMI_HTX_SYNC_OCTET: - LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts; - HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32); - break; - - case SK_PNMI_HRX_FCS: - /* - * Broadcom filters FCS errors and counts it in - * Receive Error Counter register - */ - if (pPrt->PhyType == SK_PHY_BCOM) { - /* do not read while not initialized (PHY_READ hangs!)*/ - if (pPrt->PState != SK_PRT_RESET) { - SkXmPhyRead(pAC, IoC, PhysPortIndex, PHY_BCOM_RE_CTR, &Word); - - LowVal = Word; - } - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - } - else { - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - } - break; - - default: - (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, - StatAddr[StatIndex][MacType].Reg, - &LowVal); - HighVal = pPnmiPrt->CounterHigh[StatIndex]; - break; - } - - Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); - - /* Correct value because of possible XMAC reset. XMAC Errata #2 */ - Val += pPnmiPrt->CounterOffset[StatIndex]; - - return (Val); -} - -/***************************************************************************** - * - * ResetCounter - Set all counters and timestamps to zero - * - * Description: - * Notifies other common modules which store statistic data to - * reset their counters and finally reset our own counters. - * - * Returns: - * Nothing - */ -PNMI_STATIC void ResetCounter( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -SK_U32 NetIndex) -{ - unsigned int PhysPortIndex; - SK_EVPARA EventParam; - - - SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); - - /* Notify sensor module */ - SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam); - - /* Notify RLMT module */ - EventParam.Para32[0] = NetIndex; - EventParam.Para32[1] = (SK_U32)-1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam); - EventParam.Para32[1] = 0; - - /* Notify SIRQ module */ - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam); - - /* Notify CSUM module */ -#ifdef SK_USE_CSUM - EventParam.Para32[0] = NetIndex; - EventParam.Para32[1] = (SK_U32)-1; - SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS, - EventParam); -#endif /* SK_USE_CSUM */ - - /* Clear XMAC statistic */ - for (PhysPortIndex = 0; PhysPortIndex < - (unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) { - - (void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex); - - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh, - 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. - CounterOffset, 0, sizeof(pAC->Pnmi.Port[ - PhysPortIndex].CounterOffset)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts, - 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. - StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[ - PhysPortIndex].StatSyncOctetsCts)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. - StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[ - PhysPortIndex].StatRxLongFrameCts)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. - StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[ - PhysPortIndex].StatRxFrameTooLongCts)); - SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. - StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[ - PhysPortIndex].StatRxPMaccErr)); - } - - /* - * Clear local statistics - */ - SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0, - sizeof(pAC->Pnmi.VirtualCounterOffset)); - pAC->Pnmi.RlmtChangeCts = 0; - pAC->Pnmi.RlmtChangeTime = 0; - SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0, - sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue)); - pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0; - pAC->Pnmi.RlmtChangeEstimate.Estimate = 0; - pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0; - pAC->Pnmi.Port[NetIndex].TxRetryCts = 0; - pAC->Pnmi.Port[NetIndex].RxIntrCts = 0; - pAC->Pnmi.Port[NetIndex].TxIntrCts = 0; - pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0; - pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0; - pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0; - pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0; - pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0; - pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0; -} - -/***************************************************************************** - * - * GetTrapEntry - Get an entry in the trap buffer - * - * Description: - * The trap buffer stores various events. A user application somehow - * gets notified that an event occured and retrieves the trap buffer - * contens (or simply polls the buffer). The buffer is organized as - * a ring which stores the newest traps at the beginning. The oldest - * traps are overwritten by the newest ones. Each trap entry has a - * unique number, so that applications may detect new trap entries. - * - * Returns: - * A pointer to the trap entry - */ -PNMI_STATIC char* GetTrapEntry( -SK_AC *pAC, /* Pointer to adapter context */ -SK_U32 TrapId, /* SNMP ID of the trap */ -unsigned int Size) /* Space needed for trap entry */ -{ - unsigned int BufPad = pAC->Pnmi.TrapBufPad; - unsigned int BufFree = pAC->Pnmi.TrapBufFree; - unsigned int Beg = pAC->Pnmi.TrapQueueBeg; - unsigned int End = pAC->Pnmi.TrapQueueEnd; - char *pBuf = &pAC->Pnmi.TrapBuf[0]; - int Wrap; - unsigned int NeededSpace; - unsigned int EntrySize; - SK_U32 Val32; - SK_U64 Val64; - - - /* Last byte of entry will get a copy of the entry length */ - Size ++; - - /* - * Calculate needed buffer space */ - if (Beg >= Size) { - - NeededSpace = Size; - Wrap = SK_FALSE; - } - else { - NeededSpace = Beg + Size; - Wrap = SK_TRUE; - } - - /* - * Check if enough buffer space is provided. Otherwise - * free some entries. Leave one byte space between begin - * and end of buffer to make it possible to detect whether - * the buffer is full or empty - */ - while (BufFree < NeededSpace + 1) { - - if (End == 0) { - - End = SK_PNMI_TRAP_QUEUE_LEN; - } - - EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1); - BufFree += EntrySize; - End -= EntrySize; -#ifdef DEBUG - SK_MEMSET(pBuf + End, (char)(-1), EntrySize); -#endif /* DEBUG */ - if (End == BufPad) { -#ifdef DEBUG - SK_MEMSET(pBuf, (char)(-1), End); -#endif /* DEBUG */ - BufFree += End; - End = 0; - BufPad = 0; - } - } - - /* - * Insert new entry as first entry. Newest entries are - * stored at the beginning of the queue. - */ - if (Wrap) { - - BufPad = Beg; - Beg = SK_PNMI_TRAP_QUEUE_LEN - Size; - } - else { - Beg = Beg - Size; - } - BufFree -= NeededSpace; - - /* Save the current offsets */ - pAC->Pnmi.TrapQueueBeg = Beg; - pAC->Pnmi.TrapQueueEnd = End; - pAC->Pnmi.TrapBufPad = BufPad; - pAC->Pnmi.TrapBufFree = BufFree; - - /* Initialize the trap entry */ - *(pBuf + Beg + Size - 1) = (char)Size; - *(pBuf + Beg) = (char)Size; - Val32 = (pAC->Pnmi.TrapUnique) ++; - SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32); - SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId); - Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); - SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64); - - return (pBuf + Beg); -} - -/***************************************************************************** - * - * CopyTrapQueue - Copies the trap buffer for the TRAP OID - * - * Description: - * On a query of the TRAP OID the trap buffer contents will be - * copied continuously to the request buffer, which must be large - * enough. No length check is performed. - * - * Returns: - * Nothing - */ -PNMI_STATIC void CopyTrapQueue( -SK_AC *pAC, /* Pointer to adapter context */ -char *pDstBuf) /* Buffer to which the queued traps will be copied */ -{ - unsigned int BufPad = pAC->Pnmi.TrapBufPad; - unsigned int Trap = pAC->Pnmi.TrapQueueBeg; - unsigned int End = pAC->Pnmi.TrapQueueEnd; - char *pBuf = &pAC->Pnmi.TrapBuf[0]; - unsigned int Len; - unsigned int DstOff = 0; - - - while (Trap != End) { - - Len = (unsigned int)*(pBuf + Trap); - - /* - * Last byte containing a copy of the length will - * not be copied. - */ - *(pDstBuf + DstOff) = (char)(Len - 1); - SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2); - DstOff += Len - 1; - - Trap += Len; - if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { - - Trap = BufPad; - } - } -} - -/***************************************************************************** - * - * GetTrapQueueLen - Get the length of the trap buffer - * - * Description: - * Evaluates the number of currently stored traps and the needed - * buffer size to retrieve them. - * - * Returns: - * Nothing - */ -PNMI_STATIC void GetTrapQueueLen( -SK_AC *pAC, /* Pointer to adapter context */ -unsigned int *pLen, /* Length in Bytes of all queued traps */ -unsigned int *pEntries) /* Returns number of trapes stored in queue */ -{ - unsigned int BufPad = pAC->Pnmi.TrapBufPad; - unsigned int Trap = pAC->Pnmi.TrapQueueBeg; - unsigned int End = pAC->Pnmi.TrapQueueEnd; - char *pBuf = &pAC->Pnmi.TrapBuf[0]; - unsigned int Len; - unsigned int Entries = 0; - unsigned int TotalLen = 0; - - - while (Trap != End) { - - Len = (unsigned int)*(pBuf + Trap); - TotalLen += Len - 1; - Entries ++; - - Trap += Len; - if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { - - Trap = BufPad; - } - } - - *pEntries = Entries; - *pLen = TotalLen; -} - -/***************************************************************************** - * - * QueueSimpleTrap - Store a simple trap to the trap buffer - * - * Description: - * A simple trap is a trap with now additional data. It consists - * simply of a trap code. - * - * Returns: - * Nothing - */ -PNMI_STATIC void QueueSimpleTrap( -SK_AC *pAC, /* Pointer to adapter context */ -SK_U32 TrapId) /* Type of sensor trap */ -{ - GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN); -} - -/***************************************************************************** - * - * QueueSensorTrap - Stores a sensor trap in the trap buffer - * - * Description: - * Gets an entry in the trap buffer and fills it with sensor related - * data. - * - * Returns: - * Nothing - */ -PNMI_STATIC void QueueSensorTrap( -SK_AC *pAC, /* Pointer to adapter context */ -SK_U32 TrapId, /* Type of sensor trap */ -unsigned int SensorIndex) /* Index of sensor which caused the trap */ -{ - char *pBuf; - unsigned int Offset; - unsigned int DescrLen; - SK_U32 Val32; - - - /* Get trap buffer entry */ - DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc); - pBuf = GetTrapEntry(pAC, TrapId, - SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen); - Offset = SK_PNMI_TRAP_SIMPLE_LEN; - - /* Store additionally sensor trap related data */ - Val32 = OID_SKGE_SENSOR_INDEX; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - *(pBuf + Offset + 4) = 4; - Val32 = (SK_U32)SensorIndex; - SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); - Offset += 9; - - Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - *(pBuf + Offset + 4) = (char)DescrLen; - SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc, - DescrLen); - Offset += DescrLen + 5; - - Val32 = OID_SKGE_SENSOR_TYPE; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - *(pBuf + Offset + 4) = 1; - *(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType; - Offset += 6; - - Val32 = OID_SKGE_SENSOR_VALUE; - SK_PNMI_STORE_U32(pBuf + Offset, Val32); - *(pBuf + Offset + 4) = 4; - Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue; - SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); -} - -/***************************************************************************** - * - * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer - * - * Description: - * Nothing further to explain. - * - * Returns: - * Nothing - */ -PNMI_STATIC void QueueRlmtNewMacTrap( -SK_AC *pAC, /* Pointer to adapter context */ -unsigned int ActiveMac) /* Index (0..n) of the currently active port */ -{ - char *pBuf; - SK_U32 Val32; - - - pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT, - SK_PNMI_TRAP_RLMT_CHANGE_LEN); - - Val32 = OID_SKGE_RLMT_PORT_ACTIVE; - SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); - *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; - *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac; -} - -/***************************************************************************** - * - * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer - * - * Description: - * Nothing further to explain. - * - * Returns: - * Nothing - */ -PNMI_STATIC void QueueRlmtPortTrap( -SK_AC *pAC, /* Pointer to adapter context */ -SK_U32 TrapId, /* Type of RLMT port trap */ -unsigned int PortIndex) /* Index of the port, which changed its state */ -{ - char *pBuf; - SK_U32 Val32; - - - pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN); - - Val32 = OID_SKGE_RLMT_PORT_INDEX; - SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); - *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; - *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex; -} - -/***************************************************************************** - * - * CopyMac - Copies a MAC address - * - * Description: - * Nothing further to explain. - * - * Returns: - * Nothing - */ -PNMI_STATIC void CopyMac( -char *pDst, /* Pointer to destination buffer */ -SK_MAC_ADDR *pMac) /* Pointer of Source */ -{ - int i; - - - for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) { - - *(pDst + i) = pMac->a[i]; - } -} - -#ifdef SK_POWER_MGMT -/***************************************************************************** - * - * PowerManagement - OID handler function of PowerManagement OIDs - * - * Description: - * The code is simple. No description necessary. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ - -PNMI_STATIC int PowerManagement( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* Get/PreSet/Set action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer to which to mgmt data will be retrieved */ -unsigned int *pLen, /* On call: buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ -{ - - SK_U32 RetCode = SK_PNMI_ERR_GENERAL; - - /* - * Check instance. We only handle single instance variables - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - - /* Check length */ - switch (Id) { - - case OID_PNP_CAPABILITIES: - if (*pLen < sizeof(SK_PNP_CAPABILITIES)) { - - *pLen = sizeof(SK_PNP_CAPABILITIES); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_PNP_SET_POWER: - case OID_PNP_QUERY_POWER: - if (*pLen < sizeof(SK_DEVICE_POWER_STATE)) - { - *pLen = sizeof(SK_DEVICE_POWER_STATE); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_PNP_ADD_WAKE_UP_PATTERN: - case OID_PNP_REMOVE_WAKE_UP_PATTERN: - if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) { - - *pLen = sizeof(SK_PM_PACKET_PATTERN); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_PNP_ENABLE_WAKE_UP: - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - } - - /* - * Perform action - */ - if (Action == SK_PNMI_GET) { - - /* - * Get value - */ - switch (Id) { - - case OID_PNP_CAPABILITIES: - RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen); - break; - - case OID_PNP_QUERY_POWER: - /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests - the miniport to indicate whether it can transition its NIC - to the low-power state. - A miniport driver must always return NDIS_STATUS_SUCCESS - to a query of OID_PNP_QUERY_POWER. */ - *pLen = sizeof(SK_DEVICE_POWER_STATE); - RetCode = SK_PNMI_ERR_OK; - break; - - /* NDIS handles these OIDs as write-only. - * So in case of get action the buffer with written length = 0 - * is returned - */ - case OID_PNP_SET_POWER: - case OID_PNP_ADD_WAKE_UP_PATTERN: - case OID_PNP_REMOVE_WAKE_UP_PATTERN: - *pLen = 0; - RetCode = SK_PNMI_ERR_NOT_SUPPORTED; - break; - - case OID_PNP_ENABLE_WAKE_UP: - RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen); - break; - - default: - RetCode = SK_PNMI_ERR_GENERAL; - break; - } - - return (RetCode); - } - - - /* - * Perform preset or set - */ - - /* POWER module does not support PRESET action */ - if (Action == SK_PNMI_PRESET) { - return (SK_PNMI_ERR_OK); - } - - switch (Id) { - case OID_PNP_SET_POWER: - RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); - break; - - case OID_PNP_ADD_WAKE_UP_PATTERN: - RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); - break; - - case OID_PNP_REMOVE_WAKE_UP_PATTERN: - RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); - break; - - case OID_PNP_ENABLE_WAKE_UP: - RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen); - break; - - default: - RetCode = SK_PNMI_ERR_READ_ONLY; - } - - return (RetCode); -} -#endif /* SK_POWER_MGMT */ - -#ifdef SK_DIAG_SUPPORT -/***************************************************************************** - * - * DiagActions - OID handler function of Diagnostic driver - * - * Description: - * The code is simple. No description necessary. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ - -PNMI_STATIC int DiagActions( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - - SK_U32 DiagStatus; - SK_U32 RetCode = SK_PNMI_ERR_GENERAL; - - /* - * Check instance. We only handle single instance variables. - */ - if (Instance != (SK_U32)(-1) && Instance != 1) { - - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - /* - * Check length. - */ - switch (Id) { - - case OID_SKGE_DIAG_MODE: - if (*pLen < sizeof(SK_U32)) { - - *pLen = sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG); - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* Perform action. */ - - /* GET value. */ - if (Action == SK_PNMI_GET) { - - switch (Id) { - - case OID_SKGE_DIAG_MODE: - DiagStatus = pAC->Pnmi.DiagAttached; - SK_PNMI_STORE_U32(pBuf, DiagStatus); - *pLen = sizeof(SK_U32); - RetCode = SK_PNMI_ERR_OK; - break; - - default: - *pLen = 0; - RetCode = SK_PNMI_ERR_GENERAL; - break; - } - return (RetCode); - } - - /* From here SET or PRESET value. */ - - /* PRESET value is not supported. */ - if (Action == SK_PNMI_PRESET) { - return (SK_PNMI_ERR_OK); - } - - /* SET value. */ - switch (Id) { - case OID_SKGE_DIAG_MODE: - - /* Handle the SET. */ - switch (*pBuf) { - - /* Attach the DIAG to this adapter. */ - case SK_DIAG_ATTACHED: - /* Check if we come from running */ - if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { - - RetCode = SkDrvLeaveDiagMode(pAC); - - } - else if (pAC->Pnmi.DiagAttached == SK_DIAG_IDLE) { - - RetCode = SK_PNMI_ERR_OK; - } - - else { - - RetCode = SK_PNMI_ERR_GENERAL; - - } - - if (RetCode == SK_PNMI_ERR_OK) { - - pAC->Pnmi.DiagAttached = SK_DIAG_ATTACHED; - } - break; - - /* Enter the DIAG mode in the driver. */ - case SK_DIAG_RUNNING: - RetCode = SK_PNMI_ERR_OK; - - /* - * If DiagAttached is set, we can tell the driver - * to enter the DIAG mode. - */ - if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { - /* If DiagMode is not active, we can enter it. */ - if (!pAC->DiagModeActive) { - - RetCode = SkDrvEnterDiagMode(pAC); - } - else { - - RetCode = SK_PNMI_ERR_GENERAL; - } - } - else { - - RetCode = SK_PNMI_ERR_GENERAL; - } - - if (RetCode == SK_PNMI_ERR_OK) { - - pAC->Pnmi.DiagAttached = SK_DIAG_RUNNING; - } - break; - - case SK_DIAG_IDLE: - /* Check if we come from running */ - if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { - - RetCode = SkDrvLeaveDiagMode(pAC); - - } - else if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { - - RetCode = SK_PNMI_ERR_OK; - } - - else { - - RetCode = SK_PNMI_ERR_GENERAL; - - } - - if (RetCode == SK_PNMI_ERR_OK) { - - pAC->Pnmi.DiagAttached = SK_DIAG_IDLE; - } - break; - - default: - RetCode = SK_PNMI_ERR_BAD_VALUE; - break; - } - break; - - default: - RetCode = SK_PNMI_ERR_GENERAL; - } - - if (RetCode == SK_PNMI_ERR_OK) { - *pLen = sizeof(SK_U32); - } - else { - - *pLen = 0; - } - return (RetCode); -} -#endif /* SK_DIAG_SUPPORT */ - -/***************************************************************************** - * - * Vct - OID handler function of OIDs - * - * Description: - * The code is simple. No description necessary. - * - * Returns: - * SK_PNMI_ERR_OK The request was performed successfully. - * SK_PNMI_ERR_GENERAL A general severe internal error occured. - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain - * the correct data (e.g. a 32bit value is - * needed, but a 16 bit value was passed). - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter). - * SK_PNMI_ERR_READ_ONLY Only the Get action is allowed. - * - */ - -PNMI_STATIC int Vct( -SK_AC *pAC, /* Pointer to adapter context */ -SK_IOC IoC, /* IO context handle */ -int Action, /* GET/PRESET/SET action */ -SK_U32 Id, /* Object ID that is to be processed */ -char *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ -SK_U32 Instance, /* Instance (-1,2..n) that is to be queried */ -unsigned int TableIndex, /* Index to the Id table */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ - SK_GEPORT *pPrt; - SK_PNMI_VCT *pVctBackupData; - SK_U32 LogPortMax; - SK_U32 PhysPortMax; - SK_U32 PhysPortIndex; - SK_U32 Limit; - SK_U32 Offset; - SK_BOOL Link; - SK_U32 RetCode = SK_PNMI_ERR_GENERAL; - int i; - SK_EVPARA Para; - SK_U32 CableLength; - - /* - * Calculate the port indexes from the instance. - */ - PhysPortMax = pAC->GIni.GIMacsFound; - LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); - - /* Dual net mode? */ - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - LogPortMax--; - } - - if ((Instance != (SK_U32) (-1))) { - /* Check instance range. */ - if ((Instance < 2) || (Instance > LogPortMax)) { - *pLen = 0; - return (SK_PNMI_ERR_UNKNOWN_INST); - } - - if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { - PhysPortIndex = NetIndex; - } - else { - PhysPortIndex = Instance - 2; - } - Limit = PhysPortIndex + 1; - } - else { - /* - * Instance == (SK_U32) (-1), get all Instances of that OID. - * - * Not implemented yet. May be used in future releases. - */ - PhysPortIndex = 0; - Limit = PhysPortMax; - } - - pPrt = &pAC->GIni.GP[PhysPortIndex]; - if (pPrt->PHWLinkUp) { - Link = SK_TRUE; - } - else { - Link = SK_FALSE; - } - - /* Check MAC type */ - if (pPrt->PhyType != SK_PHY_MARV_COPPER) { - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* Initialize backup data pointer. */ - pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; - - /* Check action type */ - if (Action == SK_PNMI_GET) { - /* Check length */ - switch (Id) { - - case OID_SKGE_VCT_GET: - if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) { - *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - case OID_SKGE_VCT_STATUS: - if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) { - *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* Get value */ - Offset = 0; - for (; PhysPortIndex < Limit; PhysPortIndex++) { - switch (Id) { - - case OID_SKGE_VCT_GET: - if ((Link == SK_FALSE) && - (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) { - RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); - if (RetCode == 0) { - pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; - pAC->Pnmi.VctStatus[PhysPortIndex] |= - (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); - - /* Copy results for later use to PNMI struct. */ - for (i = 0; i < 4; i++) { - if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { - if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) { - pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; - } - } - if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) { - CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); - } - else { - CableLength = 0; - } - pVctBackupData->PMdiPairLen[i] = CableLength; - pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; - } - - Para.Para32[0] = PhysPortIndex; - Para.Para32[1] = -1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); - SkEventDispatcher(pAC, IoC); - } - else { - ; /* VCT test is running. */ - } - } - - /* Get all results. */ - CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); - Offset += sizeof(SK_U8); - *(pBuf + Offset) = pPrt->PCableLen; - Offset += sizeof(SK_U8); - for (i = 0; i < 4; i++) { - SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]); - Offset += sizeof(SK_U32); - } - for (i = 0; i < 4; i++) { - *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i]; - Offset += sizeof(SK_U8); - } - - RetCode = SK_PNMI_ERR_OK; - break; - - case OID_SKGE_VCT_STATUS: - CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); - Offset += sizeof(SK_U8); - RetCode = SK_PNMI_ERR_OK; - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } /* for */ - *pLen = Offset; - return (RetCode); - - } /* if SK_PNMI_GET */ - - /* - * From here SET or PRESET action. Check if the passed - * buffer length is plausible. - */ - - /* Check length */ - switch (Id) { - case OID_SKGE_VCT_SET: - if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { - *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); - return (SK_PNMI_ERR_TOO_SHORT); - } - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - - /* - * Perform preset or set. - */ - - /* VCT does not support PRESET action. */ - if (Action == SK_PNMI_PRESET) { - return (SK_PNMI_ERR_OK); - } - - Offset = 0; - for (; PhysPortIndex < Limit; PhysPortIndex++) { - switch (Id) { - case OID_SKGE_VCT_SET: /* Start VCT test. */ - if (Link == SK_FALSE) { - SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST); - - RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE); - if (RetCode == 0) { /* RetCode: 0 => Start! */ - pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING; - pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA; - pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK; - - /* - * Start VCT timer counter. - */ - SK_MEMSET((char *) &Para, 0, sizeof(Para)); - Para.Para32[0] = PhysPortIndex; - Para.Para32[1] = -1; - SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, - 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para); - SK_PNMI_STORE_U32((pBuf + Offset), RetCode); - RetCode = SK_PNMI_ERR_OK; - } - else { /* RetCode: 2 => Running! */ - SK_PNMI_STORE_U32((pBuf + Offset), RetCode); - RetCode = SK_PNMI_ERR_OK; - } - } - else { /* RetCode: 4 => Link! */ - RetCode = 4; - SK_PNMI_STORE_U32((pBuf + Offset), RetCode); - RetCode = SK_PNMI_ERR_OK; - } - Offset += sizeof(SK_U32); - break; - - default: - *pLen = 0; - return (SK_PNMI_ERR_GENERAL); - } - } /* for */ - *pLen = Offset; - return (RetCode); - -} /* Vct */ - - -PNMI_STATIC void CheckVctStatus( -SK_AC *pAC, -SK_IOC IoC, -char *pBuf, -SK_U32 Offset, -SK_U32 PhysPortIndex) -{ - SK_GEPORT *pPrt; - SK_PNMI_VCT *pVctData; - SK_U32 RetCode; - - pPrt = &pAC->GIni.GP[PhysPortIndex]; - - pVctData = (SK_PNMI_VCT *) (pBuf + Offset); - pVctData->VctStatus = SK_PNMI_VCT_NONE; - - if (!pPrt->PHWLinkUp) { - - /* Was a VCT test ever made before? */ - if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { - if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) { - pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; - } - else { - pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; - } - } - - /* Check VCT test status. */ - RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE); - if (RetCode == 2) { /* VCT test is running. */ - pVctData->VctStatus |= SK_PNMI_VCT_RUNNING; - } - else { /* VCT data was copied to pAC here. Check PENDING state. */ - if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { - pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; - } - } - - if (pPrt->PCableLen != 0xff) { /* Old DSP value. */ - pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA; - } - } - else { - - /* Was a VCT test ever made before? */ - if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { - pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA; - pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; - } - - /* DSP only valid in 100/1000 modes. */ - if (pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed != - SK_LSPEED_STAT_10MBPS) { - pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA; - } - } -} /* CheckVctStatus */ - - -/***************************************************************************** - * - * SkPnmiGenIoctl - Handles new generic PNMI IOCTL, calls the needed - * PNMI function depending on the subcommand and - * returns all data belonging to the complete database - * or OID request. - * - * Description: - * Looks up the requested subcommand, calls the corresponding handler - * function and passes all required parameters to it. - * The function is called by the driver. It is needed to handle the new - * generic PNMI IOCTL. This IOCTL is given to the driver and contains both - * the OID and a subcommand to decide what kind of request has to be done. - * - * Returns: - * SK_PNMI_ERR_OK The request was successfully performed - * SK_PNMI_ERR_GENERAL A general severe internal error occured - * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take - * the data. - * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown - * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't - * exist (e.g. port instance 3 on a two port - * adapter. - */ -int SkPnmiGenIoctl( -SK_AC *pAC, /* Pointer to adapter context struct */ -SK_IOC IoC, /* I/O context */ -void *pBuf, /* Buffer used for the management data transfer */ -unsigned int *pLen, /* Length of buffer */ -SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ -{ -SK_I32 Mode; /* Store value of subcommand. */ -SK_U32 Oid; /* Store value of OID. */ -int ReturnCode; /* Store return value to show status of PNMI action. */ -int HeaderLength; /* Length of desired action plus OID. */ - - ReturnCode = SK_PNMI_ERR_GENERAL; - - SK_MEMCPY(&Mode, pBuf, sizeof(SK_I32)); - SK_MEMCPY(&Oid, (char *) pBuf + sizeof(SK_I32), sizeof(SK_U32)); - HeaderLength = sizeof(SK_I32) + sizeof(SK_U32); - *pLen = *pLen - HeaderLength; - SK_MEMCPY((char *) pBuf + sizeof(SK_I32), (char *) pBuf + HeaderLength, *pLen); - - switch(Mode) { - case SK_GET_SINGLE_VAR: - ReturnCode = SkPnmiGetVar(pAC, IoC, Oid, - (char *) pBuf + sizeof(SK_I32), pLen, - ((SK_U32) (-1)), NetIndex); - SK_PNMI_STORE_U32(pBuf, ReturnCode); - *pLen = *pLen + sizeof(SK_I32); - break; - case SK_PRESET_SINGLE_VAR: - ReturnCode = SkPnmiPreSetVar(pAC, IoC, Oid, - (char *) pBuf + sizeof(SK_I32), pLen, - ((SK_U32) (-1)), NetIndex); - SK_PNMI_STORE_U32(pBuf, ReturnCode); - *pLen = *pLen + sizeof(SK_I32); - break; - case SK_SET_SINGLE_VAR: - ReturnCode = SkPnmiSetVar(pAC, IoC, Oid, - (char *) pBuf + sizeof(SK_I32), pLen, - ((SK_U32) (-1)), NetIndex); - SK_PNMI_STORE_U32(pBuf, ReturnCode); - *pLen = *pLen + sizeof(SK_I32); - break; - case SK_GET_FULL_MIB: - ReturnCode = SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex); - break; - case SK_PRESET_FULL_MIB: - ReturnCode = SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex); - break; - case SK_SET_FULL_MIB: - ReturnCode = SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex); - break; - default: - break; - } - - return (ReturnCode); - -} /* SkGeIocGen */ diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c deleted file mode 100644 index e5ee6d6..0000000 --- a/drivers/net/sk98lin/skgesirq.c +++ /dev/null @@ -1,2229 +0,0 @@ -/****************************************************************************** - * - * Name: skgesirq.c - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.92 $ - * Date: $Date: 2003/09/16 14:37:07 $ - * Purpose: Special IRQ module - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * Special Interrupt handler - * - * The following abstract should show how this module is included - * in the driver path: - * - * In the ISR of the driver the bits for frame transmission complete and - * for receive complete are checked and handled by the driver itself. - * The bits of the slow path mask are checked after that and then the - * entry into the so-called "slow path" is prepared. It is an implementors - * decision whether this is executed directly or just scheduled by - * disabling the mask. In the interrupt service routine some events may be - * generated, so it would be a good idea to call the EventDispatcher - * right after this ISR. - * - * The Interrupt source register of the adapter is NOT read by this module. - * SO if the drivers implementor needs a while loop around the - * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for - * each loop entered. - * - * However, the MAC Interrupt status registers are read in a while loop. - * - */ - -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell."; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#ifndef SK_SLIM -#include "h/skgepnmi.h" /* PNMI Definitions */ -#include "h/skrlmt.h" /* RLMT Definitions */ -#endif -#include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */ - -/* local function prototypes */ -#ifdef GENESIS -static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL); -static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL); -static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16); -#endif /* GENESIS */ -#ifdef YUKON -static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL); -static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16); -#endif /* YUKON */ -#ifdef OTHER_PHY -static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL); -static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL); -static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16); -#endif /* OTHER_PHY */ - -#ifdef GENESIS -/* - * array of Rx counter from XMAC which are checked - * in AutoSense mode to check whether a link is not able to auto-negotiate. - */ -static const SK_U16 SkGeRxRegs[]= { - XM_RXF_64B, - XM_RXF_127B, - XM_RXF_255B, - XM_RXF_511B, - XM_RXF_1023B, - XM_RXF_MAX_SZ -} ; -#endif /* GENESIS */ - -#ifdef __C2MAN__ -/* - * Special IRQ function - * - * General Description: - * - */ -intro() -{} -#endif - -/****************************************************************************** - * - * SkHWInitDefSense() - Default Autosensing mode initialization - * - * Description: sets the PLinkMode for HWInit - * - * Returns: N/A - */ -static void SkHWInitDefSense( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - pPrt = &pAC->GIni.GP[Port]; - - pPrt->PAutoNegTimeOut = 0; - - if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) { - pPrt->PLinkMode = pPrt->PLinkModeConf; - return; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("AutoSensing: First mode %d on Port %d\n", - (int)SK_LMODE_AUTOFULL, Port)); - - pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; - - return; -} /* SkHWInitDefSense */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkHWSenseGetNext() - Get Next Autosensing Mode - * - * Description: gets the appropriate next mode - * - * Note: - * - */ -static SK_U8 SkHWSenseGetNext( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - pPrt = &pAC->GIni.GP[Port]; - - pPrt->PAutoNegTimeOut = 0; - - if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { - /* Leave all as configured */ - return(pPrt->PLinkModeConf); - } - - if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) { - /* Return next mode AUTOBOTH */ - return ((SK_U8)SK_LMODE_AUTOBOTH); - } - - /* Return default autofull */ - return ((SK_U8)SK_LMODE_AUTOFULL); -} /* SkHWSenseGetNext */ - - -/****************************************************************************** - * - * SkHWSenseSetNext() - Autosensing Set next mode - * - * Description: sets the appropriate next mode - * - * Returns: N/A - */ -static void SkHWSenseSetNext( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_U8 NewMode) /* New Mode to be written in sense mode */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - pPrt = &pAC->GIni.GP[Port]; - - pPrt->PAutoNegTimeOut = 0; - - if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { - return; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("AutoSensing: next mode %d on Port %d\n", - (int)NewMode, Port)); - - pPrt->PLinkMode = NewMode; - - return; -} /* SkHWSenseSetNext */ -#endif /* GENESIS */ - - -/****************************************************************************** - * - * SkHWLinkDown() - Link Down handling - * - * Description: handles the hardware link down signal - * - * Returns: N/A - */ -void SkHWLinkDown( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - pPrt = &pAC->GIni.GP[Port]; - - /* Disable all MAC interrupts */ - SkMacIrqDisable(pAC, IoC, Port); - - /* Disable Receiver and Transmitter */ - SkMacRxTxDisable(pAC, IoC, Port); - - /* Init default sense mode */ - SkHWInitDefSense(pAC, IoC, Port); - - if (pPrt->PHWLinkUp == SK_FALSE) { - return; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link down Port %d\n", Port)); - - /* Set Link to DOWN */ - pPrt->PHWLinkUp = SK_FALSE; - - /* Reset Port stati */ - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; - pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED; - - /* Re-init Phy especially when the AutoSense default is set now */ - SkMacInitPhy(pAC, IoC, Port, SK_FALSE); - - /* GP0: used for workaround of Rev. C Errata 2 */ - - /* Do NOT signal to RLMT */ - - /* Do NOT start the timer here */ -} /* SkHWLinkDown */ - - -/****************************************************************************** - * - * SkHWLinkUp() - Link Up handling - * - * Description: handles the hardware link up signal - * - * Returns: N/A - */ -static void SkHWLinkUp( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PHWLinkUp) { - /* We do NOT need to proceed on active link */ - return; - } - - pPrt->PHWLinkUp = SK_TRUE; - pPrt->PAutoNegFail = SK_FALSE; - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; - - if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF && - pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL && - pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) { - /* Link is up and no Auto-negotiation should be done */ - - /* Link speed should be the configured one */ - switch (pPrt->PLinkSpeed) { - case SK_LSPEED_AUTO: - /* default is 1000 Mbps */ - case SK_LSPEED_1000MBPS: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; - break; - case SK_LSPEED_100MBPS: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; - break; - case SK_LSPEED_10MBPS: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; - break; - } - - /* Set Link Mode Status */ - if (pPrt->PLinkMode == SK_LMODE_FULL) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL; - } - else { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF; - } - - /* No flow control without auto-negotiation */ - pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; - - /* enable Rx/Tx */ - (void)SkMacRxTxEnable(pAC, IoC, Port); - } -} /* SkHWLinkUp */ - - -/****************************************************************************** - * - * SkMacParity() - MAC parity workaround - * - * Description: handles MAC parity errors correctly - * - * Returns: N/A - */ -static void SkMacParity( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index of the port failed */ -{ - SK_EVPARA Para; - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_U32 TxMax; /* Tx Max Size Counter */ - - pPrt = &pAC->GIni.GP[Port]; - - /* Clear IRQ Tx Parity Error */ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ - SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), - (SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON && - pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE)); - } -#endif /* YUKON */ - - if (pPrt->PCheckPar) { - - if (Port == MAC_1) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG); - } - else { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG); - } - Para.Para64 = Port; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - - Para.Para32[0] = Port; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - - return; - } - - /* Check whether frames with a size of 1k were sent */ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* Snap statistic counters */ - (void)SkXmUpdateStats(pAC, IoC, Port); - - (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); - } -#endif /* YUKON */ - - if (TxMax > 0) { - /* From now on check the parity */ - pPrt->PCheckPar = SK_TRUE; - } -} /* SkMacParity */ - - -/****************************************************************************** - * - * SkGeHwErr() - Hardware Error service routine - * - * Description: handles all HW Error interrupts - * - * Returns: N/A - */ -static void SkGeHwErr( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -SK_U32 HwStatus) /* Interrupt status word */ -{ - SK_EVPARA Para; - SK_U16 Word; - - if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) { - /* PCI Errors occured */ - if ((HwStatus & IS_IRQ_STAT) != 0) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG); - } - else { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG); - } - - /* Reset all bits in the PCI STATUS register */ - SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); - SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); - SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - - Para.Para64 = 0; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); - } - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - if ((HwStatus & IS_NO_STAT_M1) != 0) { - /* Ignore it */ - /* This situation is also indicated in the descriptor */ - SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); - } - - if ((HwStatus & IS_NO_STAT_M2) != 0) { - /* Ignore it */ - /* This situation is also indicated in the descriptor */ - SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); - } - - if ((HwStatus & IS_NO_TIST_M1) != 0) { - /* Ignore it */ - /* This situation is also indicated in the descriptor */ - SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); - } - - if ((HwStatus & IS_NO_TIST_M2) != 0) { - /* Ignore it */ - /* This situation is also indicated in the descriptor */ - SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST); - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* This is necessary only for Rx timing measurements */ - if ((HwStatus & IS_IRQ_TIST_OV) != 0) { - /* increment Time Stamp Timer counter (high) */ - pAC->GIni.GITimeStampCnt++; - - /* Clear Time Stamp Timer IRQ */ - SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ); - } - - if ((HwStatus & IS_IRQ_SENSOR) != 0) { - /* no sensors on 32-bit Yukon */ - if (pAC->GIni.GIYukon32Bit) { - /* disable HW Error IRQ */ - pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; - } - } - } -#endif /* YUKON */ - - if ((HwStatus & IS_RAM_RD_PAR) != 0) { - SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR); - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG); - Para.Para64 = 0; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); - } - - if ((HwStatus & IS_RAM_WR_PAR) != 0) { - SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR); - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG); - Para.Para64 = 0; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); - } - - if ((HwStatus & IS_M1_PAR_ERR) != 0) { - SkMacParity(pAC, IoC, MAC_1); - } - - if ((HwStatus & IS_M2_PAR_ERR) != 0) { - SkMacParity(pAC, IoC, MAC_2); - } - - if ((HwStatus & IS_R1_PAR_ERR) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P); - - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG); - Para.Para64 = MAC_1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - - Para.Para32[0] = MAC_1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((HwStatus & IS_R2_PAR_ERR) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P); - - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG); - Para.Para64 = MAC_2; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - - Para.Para32[0] = MAC_2; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } -} /* SkGeHwErr */ - - -/****************************************************************************** - * - * SkGeSirqIsr() - Special Interrupt Service Routine - * - * Description: handles all non data transfer specific interrupts (slow path) - * - * Returns: N/A - */ -void SkGeSirqIsr( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -SK_U32 Istatus) /* Interrupt status word */ -{ - SK_EVPARA Para; - SK_U32 RegVal32; /* Read register value */ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_U16 PhyInt; - int i; - - if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) { - /* read the HW Error Interrupt source */ - SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); - - SkGeHwErr(pAC, IoC, RegVal32); - } - - /* - * Packet Timeout interrupts - */ - /* Check whether MACs are correctly initialized */ - if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) && - pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) { - /* MAC 1 was not initialized but Packet timeout occured */ - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004, - SKERR_SIRQ_E004MSG); - } - - if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) && - pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) { - /* MAC 2 was not initialized but Packet timeout occured */ - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005, - SKERR_SIRQ_E005MSG); - } - - if ((Istatus & IS_PA_TO_RX1) != 0) { - /* Means network is filling us up */ - SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002, - SKERR_SIRQ_E002MSG); - SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1); - } - - if ((Istatus & IS_PA_TO_RX2) != 0) { - /* Means network is filling us up */ - SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003, - SKERR_SIRQ_E003MSG); - SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2); - } - - if ((Istatus & IS_PA_TO_TX1) != 0) { - - pPrt = &pAC->GIni.GP[0]; - - /* May be a normal situation in a server with a slow network */ - SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1); - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* - * workaround: if in half duplex mode, check for Tx hangup. - * Read number of TX'ed bytes, wait for 10 ms, then compare - * the number with current value. If nothing changed, we assume - * that Tx is hanging and do a FIFO flush (see event routine). - */ - if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || - pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && - !pPrt->HalfDupTimerActive) { - /* - * many more pack. arb. timeouts may come in between, - * we ignore those - */ - pPrt->HalfDupTimerActive = SK_TRUE; - /* Snap statistic counters */ - (void)SkXmUpdateStats(pAC, IoC, 0); - - (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32); - - pPrt->LastOctets = (SK_U64)RegVal32 << 32; - - (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32); - - pPrt->LastOctets += RegVal32; - - Para.Para32[0] = 0; - SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, - SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); - } - } -#endif /* GENESIS */ - } - - if ((Istatus & IS_PA_TO_TX2) != 0) { - - pPrt = &pAC->GIni.GP[1]; - - /* May be a normal situation in a server with a slow network */ - SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2); - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* workaround: see above */ - if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || - pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && - !pPrt->HalfDupTimerActive) { - pPrt->HalfDupTimerActive = SK_TRUE; - /* Snap statistic counters */ - (void)SkXmUpdateStats(pAC, IoC, 1); - - (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32); - - pPrt->LastOctets = (SK_U64)RegVal32 << 32; - - (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32); - - pPrt->LastOctets += RegVal32; - - Para.Para32[0] = 1; - SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, - SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); - } - } -#endif /* GENESIS */ - } - - /* Check interrupts of the particular queues */ - if ((Istatus & IS_R1_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006, - SKERR_SIRQ_E006MSG); - Para.Para64 = MAC_1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((Istatus & IS_R2_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007, - SKERR_SIRQ_E007MSG); - Para.Para64 = MAC_2; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_2; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((Istatus & IS_XS1_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008, - SKERR_SIRQ_E008MSG); - Para.Para64 = MAC_1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((Istatus & IS_XA1_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009, - SKERR_SIRQ_E009MSG); - Para.Para64 = MAC_1; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((Istatus & IS_XS2_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010, - SKERR_SIRQ_E010MSG); - Para.Para64 = MAC_2; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_2; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((Istatus & IS_XA2_C) != 0) { - /* Clear IRQ */ - SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C); - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011, - SKERR_SIRQ_E011MSG); - Para.Para64 = MAC_2; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); - Para.Para32[0] = MAC_2; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - /* External reg interrupt */ - if ((Istatus & IS_EXT_REG) != 0) { - /* Test IRQs from PHY */ - for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - - pPrt = &pAC->GIni.GP[i]; - - if (pPrt->PState == SK_PRT_RESET) { - continue; - } - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - switch (pPrt->PhyType) { - - case SK_PHY_XMAC: - break; - - case SK_PHY_BCOM: - SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); - - if ((PhyInt & ~PHY_B_DEF_MSK) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Port %d Bcom Int: 0x%04X\n", - i, PhyInt)); - SkPhyIsrBcom(pAC, IoC, i, PhyInt); - } - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); - - if ((PhyInt & PHY_L_DEF_MSK) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Port %d Lone Int: %x\n", - i, PhyInt)); - SkPhyIsrLone(pAC, IoC, i, PhyInt); - } - break; -#endif /* OTHER_PHY */ - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* Read PHY Interrupt Status */ - SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); - - if ((PhyInt & PHY_M_DEF_MSK) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Port %d Marv Int: 0x%04X\n", - i, PhyInt)); - SkPhyIsrGmac(pAC, IoC, i, PhyInt); - } - } -#endif /* YUKON */ - } - } - - /* I2C Ready interrupt */ - if ((Istatus & IS_I2C_READY) != 0) { -#ifdef SK_SLIM - SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); -#else - SkI2cIsr(pAC, IoC); -#endif - } - - /* SW forced interrupt */ - if ((Istatus & IS_IRQ_SW) != 0) { - /* clear the software IRQ */ - SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ); - } - - if ((Istatus & IS_LNK_SYNC_M1) != 0) { - /* - * We do NOT need the Link Sync interrupt, because it shows - * us only a link going down. - */ - /* clear interrupt */ - SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ); - } - - /* Check MAC after link sync counter */ - if ((Istatus & IS_MAC1) != 0) { - /* IRQ from MAC 1 */ - SkMacIrq(pAC, IoC, MAC_1); - } - - if ((Istatus & IS_LNK_SYNC_M2) != 0) { - /* - * We do NOT need the Link Sync interrupt, because it shows - * us only a link going down. - */ - /* clear interrupt */ - SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ); - } - - /* Check MAC after link sync counter */ - if ((Istatus & IS_MAC2) != 0) { - /* IRQ from MAC 2 */ - SkMacIrq(pAC, IoC, MAC_2); - } - - /* Timer interrupt (served last) */ - if ((Istatus & IS_TIMINT) != 0) { - /* check for HW Errors */ - if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) { - /* read the HW Error Interrupt source */ - SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); - - SkGeHwErr(pAC, IoC, RegVal32); - } - - SkHwtIsr(pAC, IoC); - } - -} /* SkGeSirqIsr */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2 - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - */ -static int SkGePortCheckShorts( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port) /* Which port should be checked */ -{ - SK_U32 Shorts; /* Short Event Counter */ - SK_U32 CheckShorts; /* Check value for Short Event Counter */ - SK_U64 RxCts; /* Rx Counter (packets on network) */ - SK_U32 RxTmp; /* Rx temp. Counter */ - SK_U32 FcsErrCts; /* FCS Error Counter */ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - int Rtv; /* Return value */ - int i; - - pPrt = &pAC->GIni.GP[Port]; - - /* Default: no action */ - Rtv = SK_HW_PS_NONE; - - (void)SkXmUpdateStats(pAC, IoC, Port); - - /* Extra precaution: check for short Event counter */ - (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); - - /* - * Read Rx counters (packets seen on the network and not necessarily - * really received. - */ - RxCts = 0; - - for (i = 0; i < ARRAY_SIZE(SkGeRxRegs); i++) { - - (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp); - - RxCts += (SK_U64)RxTmp; - } - - /* On default: check shorts against zero */ - CheckShorts = 0; - - /* Extra precaution on active links */ - if (pPrt->PHWLinkUp) { - /* Reset Link Restart counter */ - pPrt->PLinkResCt = 0; - pPrt->PAutoNegTOCt = 0; - - /* If link is up check for 2 */ - CheckShorts = 2; - - (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); - - if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && - pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && - (pPrt->PLinkMode == SK_LMODE_HALF || - pPrt->PLinkMode == SK_LMODE_FULL)) { - /* - * This is autosensing and we are in the fallback - * manual full/half duplex mode. - */ - if (RxCts == pPrt->PPrevRx) { - /* Nothing received, restart link */ - pPrt->PPrevFcs = FcsErrCts; - pPrt->PPrevShorts = Shorts; - - return(SK_HW_PS_RESTART); - } - else { - pPrt->PLipaAutoNeg = SK_LIPA_MANUAL; - } - } - - if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) || - (!(FcsErrCts - pPrt->PPrevFcs))) { - /* - * Note: The compare with zero above has to be done the way shown, - * otherwise the Linux driver will have a problem. - */ - /* - * We received a bunch of frames or no CRC error occured on the - * network -> ok. - */ - pPrt->PPrevRx = RxCts; - pPrt->PPrevFcs = FcsErrCts; - pPrt->PPrevShorts = Shorts; - - return(SK_HW_PS_NONE); - } - - pPrt->PPrevFcs = FcsErrCts; - } - - - if ((Shorts - pPrt->PPrevShorts) > CheckShorts) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Short Event Count Restart Port %d \n", Port)); - Rtv = SK_HW_PS_RESTART; - } - - pPrt->PPrevShorts = Shorts; - pPrt->PPrevRx = RxCts; - - return(Rtv); -} /* SkGePortCheckShorts */ -#endif /* GENESIS */ - - -/****************************************************************************** - * - * SkGePortCheckUp() - Check if the link is up - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUp( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port) /* Which port should be checked */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */ - int Rtv; /* Return value */ - - Rtv = SK_HW_PS_NONE; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - AutoNeg = SK_FALSE; - } - else { - AutoNeg = SK_TRUE; - } - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - switch (pPrt->PhyType) { - - case SK_PHY_XMAC: - Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg); - break; - case SK_PHY_BCOM: - Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg); - break; - case SK_PHY_NAT: - Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg); - break; -#endif /* OTHER_PHY */ - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg); - } -#endif /* YUKON */ - - return(Rtv); -} /* SkGePortCheckUp */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2 - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUpXmac( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port, /* Which port should be checked */ -SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ -{ - SK_U32 Shorts; /* Short Event Counter */ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - int Done; - SK_U32 GpReg; /* General Purpose register value */ - SK_U16 Isrc; /* Interrupt source register */ - SK_U16 IsrcSum; /* Interrupt source register sum */ - SK_U16 LpAb; /* Link Partner Ability */ - SK_U16 ResAb; /* Resolved Ability */ - SK_U16 ExtStat; /* Extended Status Register */ - SK_U8 NextMode; /* Next AutoSensing Mode */ - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PHWLinkUp) { - if (pPrt->PhyType != SK_PHY_XMAC) { - return(SK_HW_PS_NONE); - } - else { - return(SkGePortCheckShorts(pAC, IoC, Port)); - } - } - - IsrcSum = pPrt->PIsave; - pPrt->PIsave = 0; - - /* Now wait for each port's link */ - if (pPrt->PLinkBroken) { - /* Link was broken */ - XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); - - if ((GpReg & XM_GP_INP_ASS) == 0) { - /* The Link is in sync */ - XM_IN16(IoC, Port, XM_ISRC, &Isrc); - IsrcSum |= Isrc; - SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); - - if ((Isrc & XM_IS_INP_ASS) == 0) { - /* It has been in sync since last time */ - /* Restart the PORT */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link in sync Restart Port %d\n", Port)); - - (void)SkXmUpdateStats(pAC, IoC, Port); - - /* We now need to reinitialize the PrevShorts counter */ - (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); - pPrt->PPrevShorts = Shorts; - - pPrt->PLinkBroken = SK_FALSE; - - /* - * Link Restart Workaround: - * it may be possible that the other Link side - * restarts its link as well an we detect - * another LinkBroken. To prevent this - * happening we check for a maximum number - * of consecutive restart. If those happens, - * we do NOT restart the active link and - * check whether the link is now o.k. - */ - pPrt->PLinkResCt++; - - pPrt->PAutoNegTimeOut = 0; - - if (pPrt->PLinkResCt < SK_MAX_LRESTART) { - return(SK_HW_PS_RESTART); - } - - pPrt->PLinkResCt = 0; - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); - } - else { - pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); - - /* Do nothing more if link is broken */ - return(SK_HW_PS_NONE); - } - } - else { - /* Do nothing more if link is broken */ - return(SK_HW_PS_NONE); - } - - } - else { - /* Link was not broken, check if it is */ - XM_IN16(IoC, Port, XM_ISRC, &Isrc); - IsrcSum |= Isrc; - if ((Isrc & XM_IS_INP_ASS) != 0) { - XM_IN16(IoC, Port, XM_ISRC, &Isrc); - IsrcSum |= Isrc; - if ((Isrc & XM_IS_INP_ASS) != 0) { - XM_IN16(IoC, Port, XM_ISRC, &Isrc); - IsrcSum |= Isrc; - if ((Isrc & XM_IS_INP_ASS) != 0) { - pPrt->PLinkBroken = SK_TRUE; - /* Re-Init Link partner Autoneg flag */ - pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link broken Port %d\n", Port)); - - /* Cable removed-> reinit sense mode */ - SkHWInitDefSense(pAC, IoC, Port); - - return(SK_HW_PS_RESTART); - } - } - } - else { - SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc); - - if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) { - return(SK_HW_PS_RESTART); - } - } - } - - /* - * here we usually can check whether the link is in sync and - * auto-negotiation is done. - */ - XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); - XM_IN16(IoC, Port, XM_ISRC, &Isrc); - IsrcSum |= Isrc; - - SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); - - if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { - if ((GpReg & XM_GP_INP_ASS) == 0) { - /* Save Auto-negotiation Done interrupt only if link is in sync */ - pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); - } -#ifdef DEBUG - if ((pPrt->PIsave & XM_IS_AND) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg done rescheduled Port %d\n", Port)); - } -#endif /* DEBUG */ - return(SK_HW_PS_NONE); - } - - if (AutoNeg) { - if ((IsrcSum & XM_IS_AND) != 0) { - SkHWLinkUp(pAC, IoC, Port); - Done = SkMacAutoNegDone(pAC, IoC, Port); - if (Done != SK_AND_OK) { - /* Get PHY parameters, for debugging only */ - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb); - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", - Port, LpAb, ResAb)); - - /* Try next possible mode */ - NextMode = SkHWSenseGetNext(pAC, IoC, Port); - SkHWLinkDown(pAC, IoC, Port); - if (Done == SK_AND_DUP_CAP) { - /* GoTo next mode */ - SkHWSenseSetNext(pAC, IoC, Port, NextMode); - } - - return(SK_HW_PS_RESTART); - } - /* - * Dummy Read extended status to prevent extra link down/ups - * (clear Page Received bit if set) - */ - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat); - - return(SK_HW_PS_LINK); - } - - /* AutoNeg not done, but HW link is up. Check for timeouts */ - pPrt->PAutoNegTimeOut++; - if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { - /* Increase the Timeout counter */ - pPrt->PAutoNegTOCt++; - - /* Timeout occured */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("AutoNeg timeout Port %d\n", Port)); - if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && - pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { - /* Set Link manually up */ - SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Set manual full duplex Port %d\n", Port)); - } - - if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && - pPrt->PLipaAutoNeg == SK_LIPA_AUTO && - pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) { - /* - * This is rather complicated. - * we need to check here whether the LIPA_AUTO - * we saw before is false alert. We saw at one - * switch ( SR8800) that on boot time it sends - * just one auto-neg packet and does no further - * auto-negotiation. - * Solution: we restart the autosensing after - * a few timeouts. - */ - pPrt->PAutoNegTOCt = 0; - pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; - SkHWInitDefSense(pAC, IoC, Port); - } - - /* Do the restart */ - return(SK_HW_PS_RESTART); - } - } - else { - /* Link is up and we don't need more */ -#ifdef DEBUG - if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("ERROR: Lipa auto detected on port %d\n", Port)); - } -#endif /* DEBUG */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link sync(GP), Port %d\n", Port)); - SkHWLinkUp(pAC, IoC, Port); - - /* - * Link sync (GP) and so assume a good connection. But if not received - * a bunch of frames received in a time slot (maybe broken tx cable) - * the port is restart. - */ - return(SK_HW_PS_LINK); - } - - return(SK_HW_PS_NONE); -} /* SkGePortCheckUpXmac */ - - -/****************************************************************************** - * - * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUpBcom( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port, /* Which port should be checked */ -SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - int Done; - SK_U16 Isrc; /* Interrupt source register */ - SK_U16 PhyStat; /* Phy Status Register */ - SK_U16 ResAb; /* Master/Slave resolution */ - SK_U16 Ctrl; /* Broadcom control flags */ -#ifdef DEBUG - SK_U16 LpAb; - SK_U16 ExtStat; -#endif /* DEBUG */ - - pPrt = &pAC->GIni.GP[Port]; - - /* Check for No HCD Link events (#10523) */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc); - -#ifdef xDEBUG - if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) == - (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) { - - SK_U32 Stat1, Stat2, Stat3; - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "CheckUp1 - Stat: %x, Mask: %x", - (void *)Isrc, - (void *)Stat1); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2); - Stat1 = Stat1 << 16 | Stat2; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); - Stat2 = Stat2 << 16 | Stat3; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "Ctrl/Stat: %x, AN Adv/LP: %x", - (void *)Stat1, - (void *)Stat2); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); - Stat1 = Stat1 << 16 | Stat2; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3); - Stat2 = Stat2 << 16 | Stat3; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", - (void *)Stat1, - (void *)Stat2); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); - Stat1 = Stat1 << 16 | Stat2; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); - Stat2 = Stat2 << 16 | Stat3; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", - (void *)Stat1, - (void *)Stat2); - } -#endif /* DEBUG */ - - if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) { - /* - * Workaround BCom Errata: - * enable and disable loopback mode if "NO HCD" occurs. - */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, - (SK_U16)(Ctrl | PHY_CT_LOOP)); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, - (SK_U16)(Ctrl & ~PHY_CT_LOOP)); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("No HCD Link event, Port %d\n", Port)); -#ifdef xDEBUG - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "No HCD link event, port %d.", - (void *)Port, - (void *)NULL); -#endif /* DEBUG */ - } - - /* Not obsolete: link status bit is latched to 0 and autoclearing! */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); - - if (pPrt->PHWLinkUp) { - return(SK_HW_PS_NONE); - } - -#ifdef xDEBUG - { - SK_U32 Stat1, Stat2, Stat3; - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "CheckUp1a - Stat: %x, Mask: %x", - (void *)Isrc, - (void *)Stat1); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); - Stat1 = Stat1 << 16 | PhyStat; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); - Stat2 = Stat2 << 16 | Stat3; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "Ctrl/Stat: %x, AN Adv/LP: %x", - (void *)Stat1, - (void *)Stat2); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); - Stat1 = Stat1 << 16 | Stat2; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); - Stat2 = Stat2 << 16 | ResAb; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", - (void *)Stat1, - (void *)Stat2); - - Stat1 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); - Stat1 = Stat1 << 16 | Stat2; - Stat2 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); - Stat3 = 0; - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); - Stat2 = Stat2 << 16 | Stat3; - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", - (void *)Stat1, - (void *)Stat2); - } -#endif /* DEBUG */ - - /* - * Here we usually can check whether the link is in sync and - * auto-negotiation is done. - */ - - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); - - SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); - - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); - - if ((ResAb & PHY_B_1000S_MSF) != 0) { - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Master/Slave Fault port %d\n", Port)); - - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PMSStatus = SK_MS_STAT_FAULT; - - return(SK_HW_PS_RESTART); - } - - if ((PhyStat & PHY_ST_LSYNC) == 0) { - return(SK_HW_PS_NONE); - } - - pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? - SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Port %d, ResAb: 0x%04X\n", Port, ResAb)); - - if (AutoNeg) { - if ((PhyStat & PHY_ST_AN_OVER) != 0) { - - SkHWLinkUp(pAC, IoC, Port); - - Done = SkMacAutoNegDone(pAC, IoC, Port); - - if (Done != SK_AND_OK) { -#ifdef DEBUG - /* Get PHY parameters, for debugging only */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb); - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", - Port, LpAb, ExtStat)); -#endif /* DEBUG */ - return(SK_HW_PS_RESTART); - } - else { -#ifdef xDEBUG - /* Dummy read ISR to prevent extra link downs/ups */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); - - if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "CheckUp2 - Stat: %x", - (void *)ExtStat, - (void *)NULL); - } -#endif /* DEBUG */ - return(SK_HW_PS_LINK); - } - } - } - else { /* !AutoNeg */ - /* Link is up and we don't need more. */ -#ifdef DEBUG - if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("ERROR: Lipa auto detected on port %d\n", Port)); - } -#endif /* DEBUG */ - -#ifdef xDEBUG - /* Dummy read ISR to prevent extra link downs/ups */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); - - if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { - CMSMPrintString( - pAC->pConfigTable, - MSG_TYPE_RUNTIME_INFO, - "CheckUp3 - Stat: %x", - (void *)ExtStat, - (void *)NULL); - } -#endif /* DEBUG */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link sync(GP), Port %d\n", Port)); - SkHWLinkUp(pAC, IoC, Port); - - return(SK_HW_PS_LINK); - } - - return(SK_HW_PS_NONE); -} /* SkGePortCheckUpBcom */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUpGmac( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port, /* Which port should be checked */ -SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - int Done; - SK_U16 PhyIsrc; /* PHY Interrupt source */ - SK_U16 PhyStat; /* PPY Status */ - SK_U16 PhySpecStat;/* PHY Specific Status */ - SK_U16 ResAb; /* Master/Slave resolution */ - SK_EVPARA Para; -#ifdef DEBUG - SK_U16 Word; /* I/O helper */ -#endif /* DEBUG */ - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PHWLinkUp) { - return(SK_HW_PS_NONE); - } - - /* Read PHY Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); - - /* Read PHY Interrupt Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc); - - if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc)); - } - - if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc)); - } - - SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); - - if ((ResAb & PHY_B_1000S_MSF) != 0) { - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Master/Slave Fault port %d\n", Port)); - - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PMSStatus = SK_MS_STAT_FAULT; - - return(SK_HW_PS_RESTART); - } - - /* Read PHY Specific Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat)); - -#ifdef DEBUG - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word); - - if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 || - (PhySpecStat & PHY_M_PS_PAGE_REC) != 0) { - /* Read PHY Next Page Link Partner */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Page Received, NextPage: 0x%04X\n", Word)); - } -#endif /* DEBUG */ - - if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { - return(SK_HW_PS_NONE); - } - - if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 || - (PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) { - /* Downshift detected */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG); - - Para.Para64 = Port; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc)); - } - - pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? - SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; - - pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); - - if (AutoNeg) { - /* Auto-Negotiation Over ? */ - if ((PhyStat & PHY_ST_AN_OVER) != 0) { - - SkHWLinkUp(pAC, IoC, Port); - - Done = SkMacAutoNegDone(pAC, IoC, Port); - - if (Done != SK_AND_OK) { - return(SK_HW_PS_RESTART); - } - - return(SK_HW_PS_LINK); - } - } - else { /* !AutoNeg */ - /* Link is up and we don't need more */ -#ifdef DEBUG - if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("ERROR: Lipa auto detected on port %d\n", Port)); - } -#endif /* DEBUG */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link sync, Port %d\n", Port)); - SkHWLinkUp(pAC, IoC, Port); - - return(SK_HW_PS_LINK); - } - - return(SK_HW_PS_NONE); -} /* SkGePortCheckUpGmac */ -#endif /* YUKON */ - - -#ifdef OTHER_PHY -/****************************************************************************** - * - * SkGePortCheckUpLone() - Check if the link is up on Level One PHY - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUpLone( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port, /* Which port should be checked */ -SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - int Done; - SK_U16 Isrc; /* Interrupt source register */ - SK_U16 LpAb; /* Link Partner Ability */ - SK_U16 ExtStat; /* Extended Status Register */ - SK_U16 PhyStat; /* Phy Status Register */ - SK_U16 StatSum; - SK_U8 NextMode; /* Next AutoSensing Mode */ - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PHWLinkUp) { - return(SK_HW_PS_NONE); - } - - StatSum = pPrt->PIsave; - pPrt->PIsave = 0; - - /* - * here we usually can check whether the link is in sync and - * auto-negotiation is done. - */ - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat); - StatSum |= PhyStat; - - SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - - if ((PhyStat & PHY_ST_LSYNC) == 0) { - /* Save Auto-negotiation Done bit */ - pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); -#ifdef DEBUG - if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg done rescheduled Port %d\n", Port)); - } -#endif /* DEBUG */ - return(SK_HW_PS_NONE); - } - - if (AutoNeg) { - if ((StatSum & PHY_ST_AN_OVER) != 0) { - SkHWLinkUp(pAC, IoC, Port); - Done = SkMacAutoNegDone(pAC, IoC, Port); - if (Done != SK_AND_OK) { - /* Get PHY parameters, for debugging only */ - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb); - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", - Port, LpAb, ExtStat)); - - /* Try next possible mode */ - NextMode = SkHWSenseGetNext(pAC, IoC, Port); - SkHWLinkDown(pAC, IoC, Port); - if (Done == SK_AND_DUP_CAP) { - /* GoTo next mode */ - SkHWSenseSetNext(pAC, IoC, Port, NextMode); - } - - return(SK_HW_PS_RESTART); - - } - else { - /* - * Dummy Read interrupt status to prevent - * extra link down/ups - */ - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); - return(SK_HW_PS_LINK); - } - } - - /* AutoNeg not done, but HW link is up. Check for timeouts */ - pPrt->PAutoNegTimeOut++; - if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { - /* Timeout occured */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("AutoNeg timeout Port %d\n", Port)); - if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && - pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { - /* Set Link manually up */ - SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Set manual full duplex Port %d\n", Port)); - } - - /* Do the restart */ - return(SK_HW_PS_RESTART); - } - } - else { - /* Link is up and we don't need more */ -#ifdef DEBUG - if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("ERROR: Lipa auto detected on port %d\n", Port)); - } -#endif /* DEBUG */ - - /* - * Dummy Read interrupt status to prevent - * extra link down/ups - */ - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("Link sync(GP), Port %d\n", Port)); - SkHWLinkUp(pAC, IoC, Port); - - return(SK_HW_PS_LINK); - } - - return(SK_HW_PS_NONE); -} /* SkGePortCheckUpLone */ - - -/****************************************************************************** - * - * SkGePortCheckUpNat() - Check if the link is up on National PHY - * - * return: - * 0 o.k. nothing needed - * 1 Restart needed on this port - * 2 Link came up - */ -static int SkGePortCheckUpNat( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO Context */ -int Port, /* Which port should be checked */ -SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ -{ - /* todo: National */ - return(SK_HW_PS_NONE); -} /* SkGePortCheckUpNat */ -#endif /* OTHER_PHY */ - - -/****************************************************************************** - * - * SkGeSirqEvent() - Event Service Routine - * - * Description: - * - * Notes: - */ -int SkGeSirqEvent( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* Io Context */ -SK_U32 Event, /* Module specific Event */ -SK_EVPARA Para) /* Event specific Parameter */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_U32 Port; - SK_U32 Val32; - int PortStat; - SK_U8 Val8; -#ifdef GENESIS - SK_U64 Octets; -#endif /* GENESIS */ - - Port = Para.Para32[0]; - pPrt = &pAC->GIni.GP[Port]; - - switch (Event) { - case SK_HWEV_WATIM: - if (pPrt->PState == SK_PRT_RESET) { - - PortStat = SK_HW_PS_NONE; - } - else { - /* Check whether port came up */ - PortStat = SkGePortCheckUp(pAC, IoC, (int)Port); - } - - switch (PortStat) { - case SK_HW_PS_RESTART: - if (pPrt->PHWLinkUp) { - /* Set Link to down */ - SkHWLinkDown(pAC, IoC, (int)Port); - - /* - * Signal directly to RLMT to ensure correct - * sequence of SWITCH and RESET event. - */ - SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); - } - - /* Restart needed */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); - break; - - case SK_HW_PS_LINK: - /* Signal to RLMT */ - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para); - break; - } - - /* Start again the check Timer */ - if (pPrt->PHWLinkUp) { - Val32 = SK_WA_ACT_TIME; - } - else { - Val32 = SK_WA_INA_TIME; - } - - /* Todo: still needed for non-XMAC PHYs??? */ - /* Start workaround Errata #2 timer */ - SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32, - SKGE_HWAC, SK_HWEV_WATIM, Para); - break; - - case SK_HWEV_PORT_START: - if (pPrt->PHWLinkUp) { - /* - * Signal directly to RLMT to ensure correct - * sequence of SWITCH and RESET event. - */ - SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); - } - - SkHWLinkDown(pAC, IoC, (int)Port); - - /* Schedule Port RESET */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); - - /* Start workaround Errata #2 timer */ - SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, - SKGE_HWAC, SK_HWEV_WATIM, Para); - break; - - case SK_HWEV_PORT_STOP: - if (pPrt->PHWLinkUp) { - /* - * Signal directly to RLMT to ensure correct - * sequence of SWITCH and RESET event. - */ - SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); - } - - /* Stop Workaround Timer */ - SkTimerStop(pAC, IoC, &pPrt->PWaTimer); - - SkHWLinkDown(pAC, IoC, (int)Port); - break; - - case SK_HWEV_UPDATE_STAT: - /* We do NOT need to update any statistics */ - break; - - case SK_HWEV_CLEAR_STAT: - /* We do NOT need to clear any statistics */ - for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) { - pPrt->PPrevRx = 0; - pPrt->PPrevFcs = 0; - pPrt->PPrevShorts = 0; - } - break; - - case SK_HWEV_SET_LMODE: - Val8 = (SK_U8)Para.Para32[1]; - if (pPrt->PLinkModeConf != Val8) { - /* Set New link mode */ - pPrt->PLinkModeConf = Val8; - - /* Restart Port */ - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); - } - break; - - case SK_HWEV_SET_FLOWMODE: - Val8 = (SK_U8)Para.Para32[1]; - if (pPrt->PFlowCtrlMode != Val8) { - /* Set New Flow Control mode */ - pPrt->PFlowCtrlMode = Val8; - - /* Restart Port */ - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); - } - break; - - case SK_HWEV_SET_ROLE: - /* not possible for fiber */ - if (!pAC->GIni.GICopperType) { - break; - } - Val8 = (SK_U8)Para.Para32[1]; - if (pPrt->PMSMode != Val8) { - /* Set New Role (Master/Slave) mode */ - pPrt->PMSMode = Val8; - - /* Restart Port */ - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); - } - break; - - case SK_HWEV_SET_SPEED: - if (pPrt->PhyType != SK_PHY_MARV_COPPER) { - break; - } - Val8 = (SK_U8)Para.Para32[1]; - if (pPrt->PLinkSpeed != Val8) { - /* Set New Speed parameter */ - pPrt->PLinkSpeed = Val8; - - /* Restart Port */ - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); - } - break; - -#ifdef GENESIS - case SK_HWEV_HALFDUP_CHK: - if (pAC->GIni.GIGenesis) { - /* - * half duplex hangup workaround. - * See packet arbiter timeout interrupt for description - */ - pPrt->HalfDupTimerActive = SK_FALSE; - if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || - pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { - /* Snap statistic counters */ - (void)SkXmUpdateStats(pAC, IoC, Port); - - (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32); - - Octets = (SK_U64)Val32 << 32; - - (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32); - - Octets += Val32; - - if (pPrt->LastOctets == Octets) { - /* Tx hanging, a FIFO flush restarts it */ - SkMacFlushTxFifo(pAC, IoC, Port); - } - } - } - break; -#endif /* GENESIS */ - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); - break; - } - - return(0); -} /* SkGeSirqEvent */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkPhyIsrBcom() - PHY interrupt service routine - * - * Description: handles all interrupts from BCom PHY - * - * Returns: N/A - */ -static void SkPhyIsrBcom( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* Io Context */ -int Port, /* Port Num = PHY Num */ -SK_U16 IStatus) /* Interrupt Status */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_EVPARA Para; - - pPrt = &pAC->GIni.GP[Port]; - - if ((IStatus & PHY_B_IS_PSE) != 0) { - /* Incorrectable pair swap error */ - SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022, - SKERR_SIRQ_E022MSG); - } - - if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { - - SkHWLinkDown(pAC, IoC, Port); - - Para.Para32[0] = (SK_U32)Port; - /* Signal to RLMT */ - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - - /* Start workaround Errata #2 timer */ - SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, - SKGE_HWAC, SK_HWEV_WATIM, Para); - } - -} /* SkPhyIsrBcom */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkPhyIsrGmac() - PHY interrupt service routine - * - * Description: handles all interrupts from Marvell PHY - * - * Returns: N/A - */ -static void SkPhyIsrGmac( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* Io Context */ -int Port, /* Port Num = PHY Num */ -SK_U16 IStatus) /* Interrupt Status */ -{ - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - SK_EVPARA Para; - SK_U16 Word; - - pPrt = &pAC->GIni.GP[Port]; - - if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) { - - SkHWLinkDown(pAC, IoC, Port); - - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg.Adv: 0x%04X\n", Word)); - - /* Set Auto-negotiation advertisement */ - if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) { - /* restore Asymmetric Pause bit */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, - (SK_U16)(Word | PHY_M_AN_ASP)); - } - - Para.Para32[0] = (SK_U32)Port; - /* Signal to RLMT */ - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - - if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { - /* Auto-Negotiation Error */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); - } - - if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { - /* FIFO Overflow/Underrun Error */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); - } - -} /* SkPhyIsrGmac */ -#endif /* YUKON */ - - -#ifdef OTHER_PHY -/****************************************************************************** - * - * SkPhyIsrLone() - PHY interrupt service routine - * - * Description: handles all interrupts from LONE PHY - * - * Returns: N/A - */ -static void SkPhyIsrLone( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* Io Context */ -int Port, /* Port Num = PHY Num */ -SK_U16 IStatus) /* Interrupt Status */ -{ - SK_EVPARA Para; - - if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) { - - SkHWLinkDown(pAC, IoC, Port); - - Para.Para32[0] = (SK_U32)Port; - /* Signal to RLMT */ - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - } - -} /* SkPhyIsrLone */ -#endif /* OTHER_PHY */ - -/* End of File */ diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c deleted file mode 100644 index 79bf57c..0000000 --- a/drivers/net/sk98lin/ski2c.c +++ /dev/null @@ -1,1296 +0,0 @@ -/****************************************************************************** - * - * Name: ski2c.c - * Project: Gigabit Ethernet Adapters, TWSI-Module - * Version: $Revision: 1.59 $ - * Date: $Date: 2003/10/20 09:07:25 $ - * Purpose: Functions to access Voltage and Temperature Sensor - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - * I2C Protocol - */ -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: ski2c.c,v 1.59 2003/10/20 09:07:25 rschmidt Exp $ (C) Marvell. "; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#include "h/lm80.h" -#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ - -#ifdef __C2MAN__ -/* - I2C protocol implementation. - - General Description: - - The I2C protocol is used for the temperature sensors and for - the serial EEPROM which hold the configuration. - - This file covers functions that allow to read write and do - some bulk requests a specified I2C address. - - The Genesis has 2 I2C buses. One for the EEPROM which holds - the VPD Data and one for temperature and voltage sensor. - The following picture shows the I2C buses, I2C devices and - their control registers. - - Note: The VPD functions are in skvpd.c -. -. PCI Config I2C Bus for VPD Data: -. -. +------------+ -. | VPD EEPROM | -. +------------+ -. | -. | <-- I2C -. | -. +-----------+-----------+ -. | | -. +-----------------+ +-----------------+ -. | PCI_VPD_ADR_REG | | PCI_VPD_DAT_REG | -. +-----------------+ +-----------------+ -. -. -. I2C Bus for LM80 sensor: -. -. +-----------------+ -. | Temperature and | -. | Voltage Sensor | -. | LM80 | -. +-----------------+ -. | -. | -. I2C --> | -. | -. +----+ -. +-------------->| OR |<--+ -. | +----+ | -. +------+------+ | -. | | | -. +--------+ +--------+ +----------+ -. | B2_I2C | | B2_I2C | | B2_I2C | -. | _CTRL | | _DATA | | _SW | -. +--------+ +--------+ +----------+ -. - The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL - and B2_I2C_DATA registers. - For driver software it is recommended to use the I2C control and - data register, because I2C bus timing is done by the ASIC and - an interrupt may be received when the I2C request is completed. - - Clock Rate Timing: MIN MAX generated by - VPD EEPROM: 50 kHz 100 kHz HW - LM80 over I2C Ctrl/Data reg. 50 kHz 100 kHz HW - LM80 over B2_I2C_SW register 0 400 kHz SW - - Note: The clock generated by the hardware is dependend on the - PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD - clock is 50 kHz. - */ -intro() -{} -#endif - -#ifdef SK_DIAG -/* - * I2C Fast Mode timing values used by the LM80. - * If new devices are added to the I2C bus the timing values have to be checked. - */ -#ifndef I2C_SLOW_TIMING -#define T_CLK_LOW 1300L /* clock low time in ns */ -#define T_CLK_HIGH 600L /* clock high time in ns */ -#define T_DATA_IN_SETUP 100L /* data in Set-up Time */ -#define T_START_HOLD 600L /* start condition hold time */ -#define T_START_SETUP 600L /* start condition Set-up time */ -#define T_STOP_SETUP 600L /* stop condition Set-up time */ -#define T_BUS_IDLE 1300L /* time the bus must free after Tx */ -#define T_CLK_2_DATA_OUT 900L /* max. clock low to data output valid */ -#else /* I2C_SLOW_TIMING */ -/* I2C Standard Mode Timing */ -#define T_CLK_LOW 4700L /* clock low time in ns */ -#define T_CLK_HIGH 4000L /* clock high time in ns */ -#define T_DATA_IN_SETUP 250L /* data in Set-up Time */ -#define T_START_HOLD 4000L /* start condition hold time */ -#define T_START_SETUP 4700L /* start condition Set-up time */ -#define T_STOP_SETUP 4000L /* stop condition Set-up time */ -#define T_BUS_IDLE 4700L /* time the bus must free after Tx */ -#endif /* !I2C_SLOW_TIMING */ - -#define NS2BCLK(x) (((x)*125)/10000) - -/* - * I2C Wire Operations - * - * About I2C_CLK_LOW(): - * - * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting - * clock to low, to prevent the ASIC and the I2C data client from driving the - * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client - * send an 'ACK'). See also Concentrator Bugreport No. 10192. - */ -#define I2C_DATA_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA) -#define I2C_DATA_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA) -#define I2C_DATA_OUT(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA_DIR) -#define I2C_DATA_IN(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA) -#define I2C_CLK_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_CLK) -#define I2C_CLK_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR) -#define I2C_START_COND(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK) - -#define NS2CLKT(x) ((x*125L)/10000) - -/*--------------- I2C Interface Register Functions --------------- */ - -/* - * sending one bit - */ -void SkI2cSndBit( -SK_IOC IoC, /* I/O Context */ -SK_U8 Bit) /* Bit to send */ -{ - I2C_DATA_OUT(IoC); - if (Bit) { - I2C_DATA_HIGH(IoC); - } - else { - I2C_DATA_LOW(IoC); - } - SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP)); - I2C_CLK_HIGH(IoC); - SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); - I2C_CLK_LOW(IoC); -} /* SkI2cSndBit*/ - - -/* - * Signal a start to the I2C Bus. - * - * A start is signaled when data goes to low in a high clock cycle. - * - * Ends with Clock Low. - * - * Status: not tested - */ -void SkI2cStart( -SK_IOC IoC) /* I/O Context */ -{ - /* Init data and Clock to output lines */ - /* Set Data high */ - I2C_DATA_OUT(IoC); - I2C_DATA_HIGH(IoC); - /* Set Clock high */ - I2C_CLK_HIGH(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP)); - - /* Set Data Low */ - I2C_DATA_LOW(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD)); - - /* Clock low without Data to Input */ - I2C_START_COND(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW)); -} /* SkI2cStart */ - - -void SkI2cStop( -SK_IOC IoC) /* I/O Context */ -{ - /* Init data and Clock to output lines */ - /* Set Data low */ - I2C_DATA_OUT(IoC); - I2C_DATA_LOW(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); - - /* Set Clock high */ - I2C_CLK_HIGH(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP)); - - /* - * Set Data High: Do it by setting the Data Line to Input. - * Because of a pull up resistor the Data Line - * floods to high. - */ - I2C_DATA_IN(IoC); - - /* - * When I2C activity is stopped - * o DATA should be set to input and - * o CLOCK should be set to high! - */ - SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE)); -} /* SkI2cStop */ - - -/* - * Receive just one bit via the I2C bus. - * - * Note: Clock must be set to LOW before calling this function. - * - * Returns The received bit. - */ -int SkI2cRcvBit( -SK_IOC IoC) /* I/O Context */ -{ - int Bit; - SK_U8 I2cSwCtrl; - - /* Init data as input line */ - I2C_DATA_IN(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); - - I2C_CLK_HIGH(IoC); - - SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); - - SK_I2C_GET_SW(IoC, &I2cSwCtrl); - - Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0; - - I2C_CLK_LOW(IoC); - SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT)); - - return(Bit); -} /* SkI2cRcvBit */ - - -/* - * Receive an ACK. - * - * returns 0 If acknowledged - * 1 in case of an error - */ -int SkI2cRcvAck( -SK_IOC IoC) /* I/O Context */ -{ - /* - * Received bit must be zero. - */ - return(SkI2cRcvBit(IoC) != 0); -} /* SkI2cRcvAck */ - - -/* - * Send an NACK. - */ -void SkI2cSndNAck( -SK_IOC IoC) /* I/O Context */ -{ - /* - * Received bit must be zero. - */ - SkI2cSndBit(IoC, 1); -} /* SkI2cSndNAck */ - - -/* - * Send an ACK. - */ -void SkI2cSndAck( -SK_IOC IoC) /* I/O Context */ -{ - /* - * Received bit must be zero. - */ - SkI2cSndBit(IoC, 0); -} /* SkI2cSndAck */ - - -/* - * Send one byte to the I2C device and wait for ACK. - * - * Return acknowleged status. - */ -int SkI2cSndByte( -SK_IOC IoC, /* I/O Context */ -int Byte) /* byte to send */ -{ - int i; - - for (i = 0; i < 8; i++) { - if (Byte & (1<<(7-i))) { - SkI2cSndBit(IoC, 1); - } - else { - SkI2cSndBit(IoC, 0); - } - } - - return(SkI2cRcvAck(IoC)); -} /* SkI2cSndByte */ - - -/* - * Receive one byte and ack it. - * - * Return byte. - */ -int SkI2cRcvByte( -SK_IOC IoC, /* I/O Context */ -int Last) /* Last Byte Flag */ -{ - int i; - int Byte = 0; - - for (i = 0; i < 8; i++) { - Byte <<= 1; - Byte |= SkI2cRcvBit(IoC); - } - - if (Last) { - SkI2cSndNAck(IoC); - } - else { - SkI2cSndAck(IoC); - } - - return(Byte); -} /* SkI2cRcvByte */ - - -/* - * Start dialog and send device address - * - * Return 0 if acknowleged, 1 in case of an error - */ -int SkI2cSndDev( -SK_IOC IoC, /* I/O Context */ -int Addr, /* Device Address */ -int Rw) /* Read / Write Flag */ -{ - SkI2cStart(IoC); - Rw = ~Rw; - Rw &= I2C_WRITE; - return(SkI2cSndByte(IoC, (Addr<<1) | Rw)); -} /* SkI2cSndDev */ - -#endif /* SK_DIAG */ - -/*----------------- I2C CTRL Register Functions ----------*/ - -/* - * waits for a completion of an I2C transfer - * - * returns 0: success, transfer completes - * 1: error, transfer does not complete, I2C transfer - * killed, wait loop terminated. - */ -static int SkI2cWait( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */ -{ - SK_U64 StartTime; - SK_U64 CurrentTime; - SK_U32 I2cCtrl; - - StartTime = SkOsGetTime(pAC); - - do { - CurrentTime = SkOsGetTime(pAC); - - if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) { - - SK_I2C_STOP(IoC); -#ifndef SK_DIAG - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG); -#endif /* !SK_DIAG */ - return(1); - } - - SK_I2C_GET_CTL(IoC, &I2cCtrl); - -#ifdef xYUKON_DBG - printf("StartTime=%lu, CurrentTime=%lu\n", - StartTime, CurrentTime); - if (kbhit()) { - return(1); - } -#endif /* YUKON_DBG */ - - } while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31); - - return(0); -} /* SkI2cWait */ - - -/* - * waits for a completion of an I2C transfer - * - * Returns - * Nothing - */ -void SkI2cWaitIrq( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC) /* I/O Context */ -{ - SK_SENSOR *pSen; - SK_U64 StartTime; - SK_U32 IrqSrc; - - pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; - - if (pSen->SenState == SK_SEN_IDLE) { - return; - } - - StartTime = SkOsGetTime(pAC); - - do { - if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) { - - SK_I2C_STOP(IoC); -#ifndef SK_DIAG - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG); -#endif /* !SK_DIAG */ - return; - } - - SK_IN32(IoC, B0_ISRC, &IrqSrc); - - } while ((IrqSrc & IS_I2C_READY) == 0); - - pSen->SenState = SK_SEN_IDLE; - return; -} /* SkI2cWaitIrq */ - -/* - * writes a single byte or 4 bytes into the I2C device - * - * returns 0: success - * 1: error - */ -static int SkI2cWrite( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 I2cData, /* I2C Data to write */ -int I2cDev, /* I2C Device Address */ -int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ -int I2cReg, /* I2C Device Register Address */ -int I2cBurst) /* I2C Burst Flag */ -{ - SK_OUT32(IoC, B2_I2C_DATA, I2cData); - - SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cDevSize, I2cReg, I2cBurst); - - return(SkI2cWait(pAC, IoC, I2C_WRITE)); -} /* SkI2cWrite*/ - - -#ifdef SK_DIAG -/* - * reads a single byte or 4 bytes from the I2C device - * - * returns the word read - */ -SK_U32 SkI2cRead( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int I2cDev, /* I2C Device Address */ -int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ -int I2cReg, /* I2C Device Register Address */ -int I2cBurst) /* I2C Burst Flag */ -{ - SK_U32 Data; - - SK_OUT32(IoC, B2_I2C_DATA, 0); - SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cDevSize, I2cReg, I2cBurst); - - if (SkI2cWait(pAC, IoC, I2C_READ) != 0) { - w_print("%s\n", SKERR_I2C_E002MSG); - } - - SK_IN32(IoC, B2_I2C_DATA, &Data); - - return(Data); -} /* SkI2cRead */ -#endif /* SK_DIAG */ - - -/* - * read a sensor's value - * - * This function reads a sensor's value from the I2C sensor chip. The sensor - * is defined by its index into the sensors database in the struct pAC points - * to. - * Returns - * 1 if the read is completed - * 0 if the read must be continued (I2C Bus still allocated) - */ -static int SkI2cReadSensor( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_SENSOR *pSen) /* Sensor to be read */ -{ - if (pSen->SenRead != NULL) { - return((*pSen->SenRead)(pAC, IoC, pSen)); - } - else { - return(0); /* no success */ - } -} /* SkI2cReadSensor */ - -/* - * Do the Init state 0 initialization - */ -static int SkI2cInit0( -SK_AC *pAC) /* Adapter Context */ -{ - int i; - - /* Begin with first sensor */ - pAC->I2c.CurrSens = 0; - - /* Begin with timeout control for state machine */ - pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; - - /* Set sensor number to zero */ - pAC->I2c.MaxSens = 0; - -#ifndef SK_DIAG - /* Initialize Number of Dummy Reads */ - pAC->I2c.DummyReads = SK_MAX_SENSORS; -#endif - - for (i = 0; i < SK_MAX_SENSORS; i++) { - pAC->I2c.SenTable[i].SenDesc = "unknown"; - pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN; - pAC->I2c.SenTable[i].SenThreErrHigh = 0; - pAC->I2c.SenTable[i].SenThreErrLow = 0; - pAC->I2c.SenTable[i].SenThreWarnHigh = 0; - pAC->I2c.SenTable[i].SenThreWarnLow = 0; - pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; - pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE; - pAC->I2c.SenTable[i].SenValue = 0; - pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT; - pAC->I2c.SenTable[i].SenErrCts = 0; - pAC->I2c.SenTable[i].SenBegErrTS = 0; - pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; - pAC->I2c.SenTable[i].SenRead = NULL; - pAC->I2c.SenTable[i].SenDev = 0; - } - - /* Now we are "INIT data"ed */ - pAC->I2c.InitLevel = SK_INIT_DATA; - return(0); -} /* SkI2cInit0*/ - - -/* - * Do the init state 1 initialization - * - * initialize the following register of the LM80: - * Configuration register: - * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT - * - * Interrupt Mask Register 1: - * - all interrupts are Disabled (0xff) - * - * Interrupt Mask Register 2: - * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter. - * - * Fan Divisor/RST_OUT register: - * - Divisors set to 1 (bits 00), all others 0s. - * - * OS# Configuration/Temperature resolution Register: - * - all 0s - * - */ -static int SkI2cInit1( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC) /* I/O Context */ -{ - int i; - SK_U8 I2cSwCtrl; - SK_GEPORT *pPrt; /* GIni Port struct pointer */ - - if (pAC->I2c.InitLevel != SK_INIT_DATA) { - /* ReInit not needed in I2C module */ - return(0); - } - - /* Set the Direction of I2C-Data Pin to IN */ - SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA); - /* Check for 32-Bit Yukon with Low at I2C-Data Pin */ - SK_I2C_GET_SW(IoC, &I2cSwCtrl); - - if ((I2cSwCtrl & I2C_DATA) == 0) { - /* this is a 32-Bit board */ - pAC->GIni.GIYukon32Bit = SK_TRUE; - return(0); - } - - /* Check for 64 Bit Yukon without sensors */ - if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_CFG, 0) != 0) { - return(0); - } - - (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_1, 0); - - (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_2, 0); - - (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_FAN_CTRL, 0); - - (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_TEMP_CTRL, 0); - - (void)SkI2cWrite(pAC, IoC, (SK_U32)LM80_CFG_START, LM80_ADDR, I2C_025K_DEV, - LM80_CFG, 0); - - /* - * MaxSens has to be updated here, because PhyType is not - * set when performing Init Level 0 - */ - pAC->I2c.MaxSens = 5; - - pPrt = &pAC->GIni.GP[0]; - - if (pAC->GIni.GIGenesis) { - if (pPrt->PhyType == SK_PHY_BCOM) { - if (pAC->GIni.GIMacsFound == 1) { - pAC->I2c.MaxSens += 1; - } - else { - pAC->I2c.MaxSens += 3; - } - } - } - else { - pAC->I2c.MaxSens += 3; - } - - for (i = 0; i < pAC->I2c.MaxSens; i++) { - switch (i) { - case 0: - pAC->I2c.SenTable[i].SenDesc = "Temperature"; - pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN; - break; - case 1: - pAC->I2c.SenTable[i].SenDesc = "Voltage PCI"; - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN; - break; - case 2: - pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO"; - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN; - pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO; - break; - case 3: - pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC"; - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN; - break; - case 4: - if (pAC->GIni.GIGenesis) { - if (pPrt->PhyType == SK_PHY_BCOM) { - pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL"; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; - } - else { - pAC->I2c.SenTable[i].SenDesc = "Voltage PMA"; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; - } - } - else { - pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX"; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN; - if (pAC->GIni.GIVauxAvail) { - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; - } - else { - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR; - } - } - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN; - break; - case 5: - if (pAC->GIni.GIGenesis) { - pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; - } - else { - pAC->I2c.SenTable[i].SenDesc = "Voltage Core 1V5"; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR; - } - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN; - break; - case 6: - if (pAC->GIni.GIGenesis) { - pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL"; - } - else { - pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3"; - } - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN; - break; - case 7: - if (pAC->GIni.GIGenesis) { - pAC->I2c.SenTable[i].SenDesc = "Speed Fan"; - pAC->I2c.SenTable[i].SenType = SK_SEN_FAN; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; - } - else { - pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; - pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; - pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; - pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; - pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; - pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; - pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN; - } - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW, - SKERR_I2C_E001, SKERR_I2C_E001MSG); - break; - } - - pAC->I2c.SenTable[i].SenValue = 0; - pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; - pAC->I2c.SenTable[i].SenErrCts = 0; - pAC->I2c.SenTable[i].SenBegErrTS = 0; - pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; - pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor; - pAC->I2c.SenTable[i].SenDev = LM80_ADDR; - } - -#ifndef SK_DIAG - pAC->I2c.DummyReads = pAC->I2c.MaxSens; -#endif /* !SK_DIAG */ - - /* Clear I2C IRQ */ - SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); - - /* Now we are I/O initialized */ - pAC->I2c.InitLevel = SK_INIT_IO; - return(0); -} /* SkI2cInit1 */ - - -/* - * Init level 2: Start first sensor read. - */ -static int SkI2cInit2( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC) /* I/O Context */ -{ - int ReadComplete; - SK_SENSOR *pSen; - - if (pAC->I2c.InitLevel != SK_INIT_IO) { - /* ReInit not needed in I2C module */ - /* Init0 and Init2 not permitted */ - return(0); - } - - pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; - ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); - - if (ReadComplete) { - SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG); - } - - /* Now we are correctly initialized */ - pAC->I2c.InitLevel = SK_INIT_RUN; - - return(0); -} /* SkI2cInit2*/ - - -/* - * Initialize I2C devices - * - * Get the first voltage value and discard it. - * Go into temperature read mode. A default pointer is not set. - * - * The things to be done depend on the init level in the parameter list: - * Level 0: - * Initialize only the data structures. Do NOT access hardware. - * Level 1: - * Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts. - * Level 2: - * Everything is possible. Interrupts may be used from now on. - * - * return: - * 0 = success - * other = error. - */ -int SkI2cInit( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context needed in levels 1 and 2 */ -int Level) /* Init Level */ -{ - - switch (Level) { - case SK_INIT_DATA: - return(SkI2cInit0(pAC)); - case SK_INIT_IO: - return(SkI2cInit1(pAC, IoC)); - case SK_INIT_RUN: - return(SkI2cInit2(pAC, IoC)); - default: - break; - } - - return(0); -} /* SkI2cInit */ - - -#ifndef SK_DIAG - -/* - * Interrupt service function for the I2C Interface - * - * Clears the Interrupt source - * - * Reads the register and check it for sending a trap. - * - * Starts the timer if necessary. - */ -void SkI2cIsr( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC) /* I/O Context */ -{ - SK_EVPARA Para; - - /* Clear I2C IRQ */ - SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); - - Para.Para64 = 0; - SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para); -} /* SkI2cIsr */ - - -/* - * Check this sensors Value against the threshold and send events. - */ -static void SkI2cCheckSensor( -SK_AC *pAC, /* Adapter Context */ -SK_SENSOR *pSen) -{ - SK_EVPARA ParaLocal; - SK_BOOL TooHigh; /* Is sensor too high? */ - SK_BOOL TooLow; /* Is sensor too low? */ - SK_U64 CurrTime; /* Current Time */ - SK_BOOL DoTrapSend; /* We need to send a trap */ - SK_BOOL DoErrLog; /* We need to log the error */ - SK_BOOL IsError; /* We need to log the error */ - - /* Check Dummy Reads first */ - if (pAC->I2c.DummyReads > 0) { - pAC->I2c.DummyReads--; - return; - } - - /* Get the current time */ - CurrTime = SkOsGetTime(pAC); - - /* Set para to the most useful setting: The current sensor. */ - ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens; - - /* Check the Value against the thresholds. First: Error Thresholds */ - TooHigh = (pSen->SenValue > pSen->SenThreErrHigh); - TooLow = (pSen->SenValue < pSen->SenThreErrLow); - - IsError = SK_FALSE; - if (TooHigh || TooLow) { - /* Error condition is satisfied */ - DoTrapSend = SK_TRUE; - DoErrLog = SK_TRUE; - - /* Now error condition is satisfied */ - IsError = SK_TRUE; - - if (pSen->SenErrFlag == SK_SEN_ERR_ERR) { - /* This state is the former one */ - - /* So check first whether we have to send a trap */ - if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD > - CurrTime) { - /* - * Do NOT send the Trap. The hold back time - * has to run out first. - */ - DoTrapSend = SK_FALSE; - } - - /* Check now whether we have to log an Error */ - if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD > - CurrTime) { - /* - * Do NOT log the error. The hold back time - * has to run out first. - */ - DoErrLog = SK_FALSE; - } - } - else { - /* We came from a different state -> Set Begin Time Stamp */ - pSen->SenBegErrTS = CurrTime; - pSen->SenErrFlag = SK_SEN_ERR_ERR; - } - - if (DoTrapSend) { - /* Set current Time */ - pSen->SenLastErrTrapTS = CurrTime; - pSen->SenErrCts++; - - /* Queue PNMI Event */ - SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? - SK_PNMI_EVT_SEN_ERR_UPP : - SK_PNMI_EVT_SEN_ERR_LOW), - ParaLocal); - } - - if (DoErrLog) { - /* Set current Time */ - pSen->SenLastErrLogTS = CurrTime; - - if (pSen->SenType == SK_SEN_TEMP) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011, SKERR_I2C_E011MSG); - } - else if (pSen->SenType == SK_SEN_VOLT) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012, SKERR_I2C_E012MSG); - } - else { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015, SKERR_I2C_E015MSG); - } - } - } - - /* Check the Value against the thresholds */ - /* 2nd: Warning thresholds */ - TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh); - TooLow = (pSen->SenValue < pSen->SenThreWarnLow); - - if (!IsError && (TooHigh || TooLow)) { - /* Error condition is satisfied */ - DoTrapSend = SK_TRUE; - DoErrLog = SK_TRUE; - - if (pSen->SenErrFlag == SK_SEN_ERR_WARN) { - /* This state is the former one */ - - /* So check first whether we have to send a trap */ - if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD > CurrTime) { - /* - * Do NOT send the Trap. The hold back time - * has to run out first. - */ - DoTrapSend = SK_FALSE; - } - - /* Check now whether we have to log an Error */ - if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD > CurrTime) { - /* - * Do NOT log the error. The hold back time - * has to run out first. - */ - DoErrLog = SK_FALSE; - } - } - else { - /* We came from a different state -> Set Begin Time Stamp */ - pSen->SenBegWarnTS = CurrTime; - pSen->SenErrFlag = SK_SEN_ERR_WARN; - } - - if (DoTrapSend) { - /* Set current Time */ - pSen->SenLastWarnTrapTS = CurrTime; - pSen->SenWarnCts++; - - /* Queue PNMI Event */ - SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? - SK_PNMI_EVT_SEN_WAR_UPP : - SK_PNMI_EVT_SEN_WAR_LOW), - ParaLocal); - } - - if (DoErrLog) { - /* Set current Time */ - pSen->SenLastWarnLogTS = CurrTime; - - if (pSen->SenType == SK_SEN_TEMP) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009, SKERR_I2C_E009MSG); - } - else if (pSen->SenType == SK_SEN_VOLT) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010, SKERR_I2C_E010MSG); - } - else { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014, SKERR_I2C_E014MSG); - } - } - } - - /* Check for NO error at all */ - if (!IsError && !TooHigh && !TooLow) { - /* Set o.k. Status if no error and no warning condition */ - pSen->SenErrFlag = SK_SEN_ERR_OK; - } - - /* End of check against the thresholds */ - - /* Bug fix AF: 16.Aug.2001: Correct the init base - * of LM80 sensor. - */ - if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) { - - pSen->SenInit = SK_SEN_DYN_INIT_NONE; - - if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) { - /* 5V PCI-IO Voltage */ - pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN; - pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR; - } - else { - /* 3.3V PCI-IO Voltage */ - pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN; - pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR; - } - } - -#ifdef TEST_ONLY - /* Dynamic thresholds also for VAUX of LM80 sensor */ - if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) { - - pSen->SenInit = SK_SEN_DYN_INIT_NONE; - - /* 3.3V VAUX Voltage */ - if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) { - pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; - pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; - } - /* 0V VAUX Voltage */ - else { - pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR; - pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR; - } - } - - /* - * Check initialization state: - * The VIO Thresholds need adaption - */ - if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && - pSen->SenValue > SK_SEN_WARNLOW2C && - pSen->SenValue < SK_SEN_WARNHIGH2) { - pSen->SenThreErrLow = SK_SEN_ERRLOW2C; - pSen->SenThreWarnLow = SK_SEN_WARNLOW2C; - pSen->SenInit = SK_TRUE; - } - - if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && - pSen->SenValue > SK_SEN_WARNLOW2 && - pSen->SenValue < SK_SEN_WARNHIGH2C) { - pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C; - pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C; - pSen->SenInit = SK_TRUE; - } -#endif - - if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) { - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG); - } -} /* SkI2cCheckSensor */ - - -/* - * The only Event to be served is the timeout event - * - */ -int SkI2cEvent( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Event, /* Module specific Event */ -SK_EVPARA Para) /* Event specific Parameter */ -{ - int ReadComplete; - SK_SENSOR *pSen; - SK_U32 Time; - SK_EVPARA ParaLocal; - int i; - - /* New case: no sensors */ - if (pAC->I2c.MaxSens == 0) { - return(0); - } - - switch (Event) { - case SK_I2CEV_IRQ: - pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; - ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); - - if (ReadComplete) { - /* Check sensor against defined thresholds */ - SkI2cCheckSensor(pAC, pSen); - - /* Increment Current sensor and set appropriate Timeout */ - pAC->I2c.CurrSens++; - if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) { - pAC->I2c.CurrSens = 0; - Time = SK_I2C_TIM_LONG; - } - else { - Time = SK_I2C_TIM_SHORT; - } - - /* Start Timer */ - ParaLocal.Para64 = (SK_U64)0; - - pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; - - SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, - SKGE_I2C, SK_I2CEV_TIM, ParaLocal); - } - else { - /* Start Timer */ - ParaLocal.Para64 = (SK_U64)0; - - pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; - - SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH, - SKGE_I2C, SK_I2CEV_TIM, ParaLocal); - } - break; - case SK_I2CEV_TIM: - if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) { - - ParaLocal.Para64 = (SK_U64)0; - SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer); - - pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; - ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); - - if (ReadComplete) { - /* Check sensor against defined thresholds */ - SkI2cCheckSensor(pAC, pSen); - - /* Increment Current sensor and set appropriate Timeout */ - pAC->I2c.CurrSens++; - if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { - pAC->I2c.CurrSens = 0; - Time = SK_I2C_TIM_LONG; - } - else { - Time = SK_I2C_TIM_SHORT; - } - - /* Start Timer */ - ParaLocal.Para64 = (SK_U64)0; - - pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; - - SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, - SKGE_I2C, SK_I2CEV_TIM, ParaLocal); - } - } - else { - pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; - pSen->SenErrFlag = SK_SEN_ERR_FAULTY; - SK_I2C_STOP(IoC); - - /* Increment Current sensor and set appropriate Timeout */ - pAC->I2c.CurrSens++; - if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { - pAC->I2c.CurrSens = 0; - Time = SK_I2C_TIM_LONG; - } - else { - Time = SK_I2C_TIM_SHORT; - } - - /* Start Timer */ - ParaLocal.Para64 = (SK_U64)0; - - pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; - - SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, - SKGE_I2C, SK_I2CEV_TIM, ParaLocal); - } - break; - case SK_I2CEV_CLEAR: - for (i = 0; i < SK_MAX_SENSORS; i++) { - pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; - pAC->I2c.SenTable[i].SenErrCts = 0; - pAC->I2c.SenTable[i].SenWarnCts = 0; - pAC->I2c.SenTable[i].SenBegErrTS = 0; - pAC->I2c.SenTable[i].SenBegWarnTS = 0; - pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0; - pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0; - pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0; - pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0; - } - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG); - } - - return(0); -} /* SkI2cEvent*/ - -#endif /* !SK_DIAG */ diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c deleted file mode 100644 index a204f5b..0000000 --- a/drivers/net/sk98lin/sklm80.c +++ /dev/null @@ -1,141 +0,0 @@ -/****************************************************************************** - * - * Name: sklm80.c - * Project: Gigabit Ethernet Adapters, TWSI-Module - * Version: $Revision: 1.22 $ - * Date: $Date: 2003/10/20 09:08:21 $ - * Purpose: Functions to access Voltage and Temperature Sensor (LM80) - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - LM80 functions -*/ -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. "; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#include "h/lm80.h" -#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ - -#define BREAK_OR_WAIT(pAC,IoC,Event) break - -/* - * read a sensors value (LM80 specific) - * - * This function reads a sensors value from the I2C sensor chip LM80. - * The sensor is defined by its index into the sensors database in the struct - * pAC points to. - * - * Returns 1 if the read is completed - * 0 if the read must be continued (I2C Bus still allocated) - */ -int SkLm80ReadSensor( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context needed in level 1 and 2 */ -SK_SENSOR *pSen) /* Sensor to be read */ -{ - SK_I32 Value; - - switch (pSen->SenState) { - case SK_SEN_IDLE: - /* Send address to ADDR register */ - SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0); - - pSen->SenState = SK_SEN_VALUE ; - BREAK_OR_WAIT(pAC, IoC, I2C_READ); - - case SK_SEN_VALUE: - /* Read value from data register */ - SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); - - Value &= 0xff; /* only least significant byte is valid */ - - /* Do NOT check the Value against the thresholds */ - /* Checking is done in the calling instance */ - - if (pSen->SenType == SK_SEN_VOLT) { - /* Voltage sensor */ - pSen->SenValue = Value * SK_LM80_VT_LSB; - pSen->SenState = SK_SEN_IDLE ; - return(1); - } - - if (pSen->SenType == SK_SEN_FAN) { - if (Value != 0 && Value != 0xff) { - /* Fan speed counter */ - pSen->SenValue = SK_LM80_FAN_FAKTOR/Value; - } - else { - /* Indicate Fan error */ - pSen->SenValue = 0; - } - pSen->SenState = SK_SEN_IDLE ; - return(1); - } - - /* First: correct the value: it might be negative */ - if ((Value & 0x80) != 0) { - /* Value is negative */ - Value = Value - 256; - } - - /* We have a temperature sensor and need to get the signed extension. - * For now we get the extension from the last reading, so in the normal - * case we won't see flickering temperatures. - */ - pSen->SenValue = (Value * SK_LM80_TEMP_LSB) + - (pSen->SenValue % SK_LM80_TEMP_LSB); - - /* Send address to ADDR register */ - SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0); - - pSen->SenState = SK_SEN_VALEXT ; - BREAK_OR_WAIT(pAC, IoC, I2C_READ); - - case SK_SEN_VALEXT: - /* Read value from data register */ - SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); - Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */ - - /* cut the LSB bit */ - pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) * - SK_LM80_TEMP_LSB); - - if (pSen->SenValue < 0) { - /* Value negative: The bit value must be subtracted */ - pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB); - } - else { - /* Value positive: The bit value must be added */ - pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB); - } - - pSen->SenState = SK_SEN_IDLE ; - return(1); - - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG); - return(1); - } - - /* Not completed */ - return(0); -} - diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c deleted file mode 100644 index 0275b4f..0000000 --- a/drivers/net/sk98lin/skqueue.c +++ /dev/null @@ -1,179 +0,0 @@ -/****************************************************************************** - * - * Name: skqueue.c - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.20 $ - * Date: $Date: 2003/09/16 13:44:00 $ - * Purpose: Management of an event queue. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - - -/* - * Event queue and dispatcher - */ -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell."; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#include "h/skqueue.h" /* Queue Definitions */ -#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ - -#ifdef __C2MAN__ -/* - Event queue management. - - General Description: - - */ -intro() -{} -#endif - -#define PRINTF(a,b,c) - -/* - * init event queue management - * - * Must be called during init level 0. - */ -void SkEventInit( -SK_AC *pAC, /* Adapter context */ -SK_IOC Ioc, /* IO context */ -int Level) /* Init level */ -{ - switch (Level) { - case SK_INIT_DATA: - pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue; - break; - default: - break; - } -} - -/* - * add event to queue - */ -void SkEventQueue( -SK_AC *pAC, /* Adapters context */ -SK_U32 Class, /* Event Class */ -SK_U32 Event, /* Event to be queued */ -SK_EVPARA Para) /* Event parameter */ -{ - pAC->Event.EvPut->Class = Class; - pAC->Event.EvPut->Event = Event; - pAC->Event.EvPut->Para = Para; - - if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT]) - pAC->Event.EvPut = pAC->Event.EvQueue; - - if (pAC->Event.EvPut == pAC->Event.EvGet) { - SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG); - } -} - -/* - * event dispatcher - * while event queue is not empty - * get event from queue - * send command to state machine - * end - * return error reported by individual Event function - * 0 if no error occured. - */ -int SkEventDispatcher( -SK_AC *pAC, /* Adapters Context */ -SK_IOC Ioc) /* Io context */ -{ - SK_EVENTELEM *pEv; /* pointer into queue */ - SK_U32 Class; - int Rtv; - - pEv = pAC->Event.EvGet; - - PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put); - - while (pEv != pAC->Event.EvPut) { - PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event); - - switch (Class = pEv->Class) { -#ifndef SK_USE_LAC_EV -#ifndef SK_SLIM - case SKGE_RLMT: /* RLMT Event */ - Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; - case SKGE_I2C: /* I2C Event */ - Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; - case SKGE_PNMI: /* PNMI Event */ - Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#endif /* not SK_SLIM */ -#endif /* not SK_USE_LAC_EV */ - case SKGE_DRV: /* Driver Event */ - Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#ifndef SK_USE_SW_TIMER - case SKGE_HWAC: - Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#else /* !SK_USE_SW_TIMER */ - case SKGE_SWT : - Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#endif /* !SK_USE_SW_TIMER */ -#ifdef SK_USE_LAC_EV - case SKGE_LACP : - Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; - case SKGE_RSF : - Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; - case SKGE_MARKER : - Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; - case SKGE_FD : - Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#endif /* SK_USE_LAC_EV */ -#ifdef SK_USE_CSUM - case SKGE_CSUM : - Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para); - break; -#endif /* SK_USE_CSUM */ - default : - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG); - Rtv = 0; - } - - if (Rtv != 0) { - return(Rtv); - } - - if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT]) - pEv = pAC->Event.EvQueue; - - /* Renew get: it is used in queue_events to detect overruns */ - pAC->Event.EvGet = pEv; - } - - return(0); -} - -/* End of file */ diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c deleted file mode 100644 index be8d1cc..0000000 --- a/drivers/net/sk98lin/skrlmt.c +++ /dev/null @@ -1,3257 +0,0 @@ -/****************************************************************************** - * - * Name: skrlmt.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.69 $ - * Date: $Date: 2003/04/15 09:39:22 $ - * Purpose: Manage links on SK-NET Adapters, esp. redundant ones. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/****************************************************************************** - * - * Description: - * - * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters. - * It is mainly intended for adapters with more than one link. - * For such adapters, this module realizes Redundant Link ManagemenT (RLMT). - * - * Include File Hierarchy: - * - * "skdrv1st.h" - * "skdrv2nd.h" - * - ******************************************************************************/ - -#ifndef lint -static const char SysKonnectFileId[] = - "@(#) $Id: skrlmt.c,v 1.69 2003/04/15 09:39:22 tschilli Exp $ (C) Marvell."; -#endif /* !defined(lint) */ - -#define __SKRLMT_C - -#ifdef __cplusplus -extern "C" { -#endif /* cplusplus */ - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" - -/* defines ********************************************************************/ - -#ifndef SK_HWAC_LINK_LED -#define SK_HWAC_LINK_LED(a,b,c,d) -#endif /* !defined(SK_HWAC_LINK_LED) */ - -#ifndef DEBUG -#define RLMT_STATIC static -#else /* DEBUG */ -#define RLMT_STATIC - -#ifndef SK_LITTLE_ENDIAN -/* First 32 bits */ -#define OFFS_LO32 1 - -/* Second 32 bits */ -#define OFFS_HI32 0 -#else /* SK_LITTLE_ENDIAN */ -/* First 32 bits */ -#define OFFS_LO32 0 - -/* Second 32 bits */ -#define OFFS_HI32 1 -#endif /* SK_LITTLE_ENDIAN */ - -#endif /* DEBUG */ - -/* ----- Private timeout values ----- */ - -#define SK_RLMT_MIN_TO_VAL 125000 /* 1/8 sec. */ -#define SK_RLMT_DEF_TO_VAL 1000000 /* 1 sec. */ -#define SK_RLMT_PORTDOWN_TIM_VAL 900000 /* another 0.9 sec. */ -#define SK_RLMT_PORTSTART_TIM_VAL 100000 /* 0.1 sec. */ -#define SK_RLMT_PORTUP_TIM_VAL 2500000 /* 2.5 sec. */ -#define SK_RLMT_SEG_TO_VAL 900000000 /* 15 min. */ - -/* Assume tick counter increment is 1 - may be set OS-dependent. */ -#ifndef SK_TICK_INCR -#define SK_TICK_INCR SK_CONSTU64(1) -#endif /* !defined(SK_TICK_INCR) */ - -/* - * Amount that a time stamp must be later to be recognized as "substantially - * later". This is about 1/128 sec, but above 1 tick counter increment. - */ -#define SK_RLMT_BC_DELTA (1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \ - (SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR)) - -/* ----- Private RLMT defaults ----- */ - -#define SK_RLMT_DEF_PREF_PORT 0 /* "Lower" port. */ -#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */ - -/* ----- Private RLMT checking states ----- */ - -#define SK_RLMT_RCS_SEG 1 /* RLMT Check State: check seg. */ -#define SK_RLMT_RCS_START_SEG 2 /* RLMT Check State: start check seg. */ -#define SK_RLMT_RCS_SEND_SEG 4 /* RLMT Check State: send BPDU packet */ -#define SK_RLMT_RCS_REPORT_SEG 8 /* RLMT Check State: report seg. */ - -/* ----- Private PORT checking states ----- */ - -#define SK_RLMT_PCS_TX 1 /* Port Check State: check tx. */ -#define SK_RLMT_PCS_RX 2 /* Port Check State: check rx. */ - -/* ----- Private PORT events ----- */ - -/* Note: Update simulation when changing these. */ -#define SK_RLMT_PORTSTART_TIM 1100 /* Port start timeout. */ -#define SK_RLMT_PORTUP_TIM 1101 /* Port can now go up. */ -#define SK_RLMT_PORTDOWN_RX_TIM 1102 /* Port did not receive once ... */ -#define SK_RLMT_PORTDOWN 1103 /* Port went down. */ -#define SK_RLMT_PORTDOWN_TX_TIM 1104 /* Partner did not receive ... */ - -/* ----- Private RLMT events ----- */ - -/* Note: Update simulation when changing these. */ -#define SK_RLMT_TIM 2100 /* RLMT timeout. */ -#define SK_RLMT_SEG_TIM 2101 /* RLMT segmentation check timeout. */ - -#define TO_SHORTEN(tim) ((tim) / 2) - -/* Error numbers and messages. */ -#define SKERR_RLMT_E001 (SK_ERRBASE_RLMT + 0) -#define SKERR_RLMT_E001_MSG "No Packet." -#define SKERR_RLMT_E002 (SKERR_RLMT_E001 + 1) -#define SKERR_RLMT_E002_MSG "Short Packet." -#define SKERR_RLMT_E003 (SKERR_RLMT_E002 + 1) -#define SKERR_RLMT_E003_MSG "Unknown RLMT event." -#define SKERR_RLMT_E004 (SKERR_RLMT_E003 + 1) -#define SKERR_RLMT_E004_MSG "PortsUp incorrect." -#define SKERR_RLMT_E005 (SKERR_RLMT_E004 + 1) -#define SKERR_RLMT_E005_MSG \ - "Net seems to be segmented (different root bridges are reported on the ports)." -#define SKERR_RLMT_E006 (SKERR_RLMT_E005 + 1) -#define SKERR_RLMT_E006_MSG "Duplicate MAC Address detected." -#define SKERR_RLMT_E007 (SKERR_RLMT_E006 + 1) -#define SKERR_RLMT_E007_MSG "LinksUp incorrect." -#define SKERR_RLMT_E008 (SKERR_RLMT_E007 + 1) -#define SKERR_RLMT_E008_MSG "Port not started but link came up." -#define SKERR_RLMT_E009 (SKERR_RLMT_E008 + 1) -#define SKERR_RLMT_E009_MSG "Corrected illegal setting of Preferred Port." -#define SKERR_RLMT_E010 (SKERR_RLMT_E009 + 1) -#define SKERR_RLMT_E010_MSG "Ignored illegal Preferred Port." - -/* LLC field values. */ -#define LLC_COMMAND_RESPONSE_BIT 1 -#define LLC_TEST_COMMAND 0xE3 -#define LLC_UI 0x03 - -/* RLMT Packet fields. */ -#define SK_RLMT_DSAP 0 -#define SK_RLMT_SSAP 0 -#define SK_RLMT_CTRL (LLC_TEST_COMMAND) -#define SK_RLMT_INDICATOR0 0x53 /* S */ -#define SK_RLMT_INDICATOR1 0x4B /* K */ -#define SK_RLMT_INDICATOR2 0x2D /* - */ -#define SK_RLMT_INDICATOR3 0x52 /* R */ -#define SK_RLMT_INDICATOR4 0x4C /* L */ -#define SK_RLMT_INDICATOR5 0x4D /* M */ -#define SK_RLMT_INDICATOR6 0x54 /* T */ -#define SK_RLMT_PACKET_VERSION 0 - -/* RLMT SPT Flag values. */ -#define SK_RLMT_SPT_FLAG_CHANGE 0x01 -#define SK_RLMT_SPT_FLAG_CHANGE_ACK 0x80 - -/* RLMT SPT Packet fields. */ -#define SK_RLMT_SPT_DSAP 0x42 -#define SK_RLMT_SPT_SSAP 0x42 -#define SK_RLMT_SPT_CTRL (LLC_UI) -#define SK_RLMT_SPT_PROTOCOL_ID0 0x00 -#define SK_RLMT_SPT_PROTOCOL_ID1 0x00 -#define SK_RLMT_SPT_PROTOCOL_VERSION_ID 0x00 -#define SK_RLMT_SPT_BPDU_TYPE 0x00 -#define SK_RLMT_SPT_FLAGS 0x00 /* ?? */ -#define SK_RLMT_SPT_ROOT_ID0 0xFF /* Lowest possible priority. */ -#define SK_RLMT_SPT_ROOT_ID1 0xFF /* Lowest possible priority. */ - -/* Remaining 6 bytes will be the current port address. */ -#define SK_RLMT_SPT_ROOT_PATH_COST0 0x00 -#define SK_RLMT_SPT_ROOT_PATH_COST1 0x00 -#define SK_RLMT_SPT_ROOT_PATH_COST2 0x00 -#define SK_RLMT_SPT_ROOT_PATH_COST3 0x00 -#define SK_RLMT_SPT_BRIDGE_ID0 0xFF /* Lowest possible priority. */ -#define SK_RLMT_SPT_BRIDGE_ID1 0xFF /* Lowest possible priority. */ - -/* Remaining 6 bytes will be the current port address. */ -#define SK_RLMT_SPT_PORT_ID0 0xFF /* Lowest possible priority. */ -#define SK_RLMT_SPT_PORT_ID1 0xFF /* Lowest possible priority. */ -#define SK_RLMT_SPT_MSG_AGE0 0x00 -#define SK_RLMT_SPT_MSG_AGE1 0x00 -#define SK_RLMT_SPT_MAX_AGE0 0x00 -#define SK_RLMT_SPT_MAX_AGE1 0xFF -#define SK_RLMT_SPT_HELLO_TIME0 0x00 -#define SK_RLMT_SPT_HELLO_TIME1 0xFF -#define SK_RLMT_SPT_FWD_DELAY0 0x00 -#define SK_RLMT_SPT_FWD_DELAY1 0x40 - -/* Size defines. */ -#define SK_RLMT_MIN_PACKET_SIZE 34 -#define SK_RLMT_MAX_PACKET_SIZE (SK_RLMT_MAX_TX_BUF_SIZE) -#define SK_PACKET_DATA_LEN (SK_RLMT_MAX_PACKET_SIZE - \ - SK_RLMT_MIN_PACKET_SIZE) - -/* ----- RLMT packet types ----- */ -#define SK_PACKET_ANNOUNCE 1 /* Port announcement. */ -#define SK_PACKET_ALIVE 2 /* Alive packet to port. */ -#define SK_PACKET_ADDR_CHANGED 3 /* Port address changed. */ -#define SK_PACKET_CHECK_TX 4 /* Check your tx line. */ - -#ifdef SK_LITTLE_ENDIAN -#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \ - SK_U8 *_Addr = (SK_U8*)(Addr); \ - SK_U16 _Val = (SK_U16)(Val); \ - *_Addr++ = (SK_U8)(_Val >> 8); \ - *_Addr = (SK_U8)(_Val & 0xFF); \ -} -#endif /* SK_LITTLE_ENDIAN */ - -#ifdef SK_BIG_ENDIAN -#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val)) -#endif /* SK_BIG_ENDIAN */ - -#define AUTONEG_FAILED SK_FALSE -#define AUTONEG_SUCCESS SK_TRUE - - -/* typedefs *******************************************************************/ - -/* RLMT packet. Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */ -typedef struct s_RlmtPacket { - SK_U8 DstAddr[SK_MAC_ADDR_LEN]; - SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; - SK_U8 TypeLen[2]; - SK_U8 DSap; - SK_U8 SSap; - SK_U8 Ctrl; - SK_U8 Indicator[7]; - SK_U8 RlmtPacketType[2]; - SK_U8 Align1[2]; - SK_U8 Random[4]; /* Random value of requesting(!) station. */ - SK_U8 RlmtPacketVersion[2]; /* RLMT Packet version. */ - SK_U8 Data[SK_PACKET_DATA_LEN]; -} SK_RLMT_PACKET; - -typedef struct s_SpTreeRlmtPacket { - SK_U8 DstAddr[SK_MAC_ADDR_LEN]; - SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; - SK_U8 TypeLen[2]; - SK_U8 DSap; - SK_U8 SSap; - SK_U8 Ctrl; - SK_U8 ProtocolId[2]; - SK_U8 ProtocolVersionId; - SK_U8 BpduType; - SK_U8 Flags; - SK_U8 RootId[8]; - SK_U8 RootPathCost[4]; - SK_U8 BridgeId[8]; - SK_U8 PortId[2]; - SK_U8 MessageAge[2]; - SK_U8 MaxAge[2]; - SK_U8 HelloTime[2]; - SK_U8 ForwardDelay[2]; -} SK_SPTREE_PACKET; - -/* global variables ***********************************************************/ - -SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}}; -SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}}; - -/* local variables ************************************************************/ - -/* None. */ - -/* functions ******************************************************************/ - -RLMT_STATIC void SkRlmtCheckSwitch( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 NetIdx); -RLMT_STATIC void SkRlmtCheckSeg( - SK_AC *pAC, - SK_IOC IoC, - SK_U32 NetIdx); -RLMT_STATIC void SkRlmtEvtSetNets( - SK_AC *pAC, - SK_IOC IoC, - SK_EVPARA Para); - -/****************************************************************************** - * - * SkRlmtInit - initialize data, set state to init - * - * Description: - * - * SK_INIT_DATA - * ============ - * - * This routine initializes all RLMT-related variables to a known state. - * The initial state is SK_RLMT_RS_INIT. - * All ports are initialized to SK_RLMT_PS_INIT. - * - * - * SK_INIT_IO - * ========== - * - * Nothing. - * - * - * SK_INIT_RUN - * =========== - * - * Determine the adapter's random value. - * Set the hw registers, the "logical MAC address", the - * RLMT multicast address, and eventually the BPDU multicast address. - * - * Context: - * init, pageable - * - * Returns: - * Nothing. - */ -void SkRlmtInit( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Level) /* Initialization Level */ -{ - SK_U32 i, j; - SK_U64 Random; - SK_EVPARA Para; - SK_MAC_ADDR VirtualMacAddress; - SK_MAC_ADDR PhysicalAMacAddress; - SK_BOOL VirtualMacAddressSet; - SK_BOOL PhysicalAMacAddressSet; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, - ("RLMT Init level %d.\n", Level)) - - switch (Level) { - case SK_INIT_DATA: /* Initialize data structures. */ - SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT)); - - for (i = 0; i < SK_MAX_MACS; i++) { - pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT; - pAC->Rlmt.Port[i].LinkDown = SK_TRUE; - pAC->Rlmt.Port[i].PortDown = SK_TRUE; - pAC->Rlmt.Port[i].PortStarted = SK_FALSE; - pAC->Rlmt.Port[i].PortNoRx = SK_FALSE; - pAC->Rlmt.Port[i].RootIdSet = SK_FALSE; - pAC->Rlmt.Port[i].PortNumber = i; - pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0]; - pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i]; - } - - pAC->Rlmt.NumNets = 1; - for (i = 0; i < SK_MAX_NETS; i++) { - pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; - pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; - pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; - pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* Automatic. */ - /* Just assuming. */ - pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; - pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; - pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; - pAC->Rlmt.Net[i].NetNumber = i; - } - - pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0]; - pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1]; -#if SK_MAX_NETS > 1 - pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1]; -#endif /* SK_MAX_NETS > 1 */ - break; - - case SK_INIT_IO: /* GIMacsFound first available here. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, - ("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound)) - - pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; - - /* Initialize HW registers? */ - if (pAC->GIni.GIMacsFound == 1) { - Para.Para32[0] = SK_RLMT_MODE_CLS; - Para.Para32[1] = 0; - (void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para); - } - break; - - case SK_INIT_RUN: - /* Ensure RLMT is set to one net. */ - if (pAC->Rlmt.NumNets > 1) { - Para.Para32[0] = 1; - Para.Para32[1] = -1; - SkRlmtEvtSetNets(pAC, IoC, Para); - } - - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - Random = SkOsGetTime(pAC); - *(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random; - - for (j = 0; j < 4; j++) { - pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort-> - CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j]; - } - - (void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY); - - /* Add RLMT MC address. */ - (void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT); - - if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) { - /* Add BPDU MC address. */ - (void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT); - } - - (void)SkAddrMcUpdate(pAC, IoC, i); - } - - VirtualMacAddressSet = SK_FALSE; - /* Read virtual MAC address from Control Register File. */ - for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - - SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]); - VirtualMacAddressSet |= VirtualMacAddress.a[j]; - } - - PhysicalAMacAddressSet = SK_FALSE; - /* Read physical MAC address for MAC A from Control Register File. */ - for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - - SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]); - PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j]; - } - - /* check if the two mac addresses contain reasonable values */ - if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) { - - pAC->Rlmt.RlmtOff = SK_TRUE; - } - - /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD - and the RLMT_LOOKAHEAD macros */ - else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) { - - pAC->Rlmt.RlmtOff = SK_TRUE; - } - else { - pAC->Rlmt.RlmtOff = SK_FALSE; - } - break; - - default: /* error */ - break; - } - return; -} /* SkRlmtInit */ - - -/****************************************************************************** - * - * SkRlmtBuildCheckChain - build the check chain - * - * Description: - * This routine builds the local check chain: - * - Each port that is up checks the next port. - * - The last port that is up checks the first port that is up. - * - * Notes: - * - Currently only local ports are considered when building the chain. - * - Currently the SuspectState is just reset; - * it would be better to save it ... - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtBuildCheckChain( -SK_AC *pAC, /* Adapter Context */ -SK_U32 NetIdx) /* Net Number */ -{ - SK_U32 i; - SK_U32 NumMacsUp; - SK_RLMT_PORT * FirstMacUp; - SK_RLMT_PORT * PrevMacUp; - - FirstMacUp = NULL; - PrevMacUp = NULL; - - if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { - for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) { - pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; - } - return; /* Done. */ - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SkRlmtBuildCheckChain.\n")) - - NumMacsUp = 0; - - for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { - pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; - pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0; - pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &= - ~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX); - - /* - * If more than two links are detected we should consider - * checking at least two other ports: - * 1. the next port that is not LinkDown and - * 2. the next port that is not PortDown. - */ - if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { - if (NumMacsUp == 0) { - FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; - } - else { - PrevMacUp->PortCheck[ - pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr = - pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress; - PrevMacUp->PortCheck[ - PrevMacUp->PortsChecked].SuspectTx = SK_FALSE; - PrevMacUp->PortsChecked++; - } - PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; - NumMacsUp++; - } - } - - if (NumMacsUp > 1) { - PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr = - FirstMacUp->AddrPort->CurrentMacAddress; - PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx = - SK_FALSE; - PrevMacUp->PortsChecked++; - } - -#ifdef DEBUG - for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Port %d checks %d other ports: %2X.\n", i, - pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked, - pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5])) - } -#endif /* DEBUG */ - - return; -} /* SkRlmtBuildCheckChain */ - - -/****************************************************************************** - * - * SkRlmtBuildPacket - build an RLMT packet - * - * Description: - * This routine sets up an RLMT packet. - * - * Context: - * runtime, pageable? - * - * Returns: - * NULL or pointer to RLMT mbuf - */ -RLMT_STATIC SK_MBUF *SkRlmtBuildPacket( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber, /* Sending port */ -SK_U16 PacketType, /* RLMT packet type */ -SK_MAC_ADDR *SrcAddr, /* Source address */ -SK_MAC_ADDR *DestAddr) /* Destination address */ -{ - int i; - SK_U16 Length; - SK_MBUF *pMb; - SK_RLMT_PACKET *pPacket; - -#ifdef DEBUG - SK_U8 CheckSrc = 0; - SK_U8 CheckDest = 0; - - for (i = 0; i < SK_MAC_ADDR_LEN; ++i) { - CheckSrc |= SrcAddr->a[i]; - CheckDest |= DestAddr->a[i]; - } - - if ((CheckSrc == 0) || (CheckDest == 0)) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR, - ("SkRlmtBuildPacket: Invalid %s%saddr.\n", - (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : ""))) - } -#endif - - if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) { - pPacket = (SK_RLMT_PACKET*)pMb->pData; - for (i = 0; i < SK_MAC_ADDR_LEN; i++) { - pPacket->DstAddr[i] = DestAddr->a[i]; - pPacket->SrcAddr[i] = SrcAddr->a[i]; - } - pPacket->DSap = SK_RLMT_DSAP; - pPacket->SSap = SK_RLMT_SSAP; - pPacket->Ctrl = SK_RLMT_CTRL; - pPacket->Indicator[0] = SK_RLMT_INDICATOR0; - pPacket->Indicator[1] = SK_RLMT_INDICATOR1; - pPacket->Indicator[2] = SK_RLMT_INDICATOR2; - pPacket->Indicator[3] = SK_RLMT_INDICATOR3; - pPacket->Indicator[4] = SK_RLMT_INDICATOR4; - pPacket->Indicator[5] = SK_RLMT_INDICATOR5; - pPacket->Indicator[6] = SK_RLMT_INDICATOR6; - - SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]); - - for (i = 0; i < 4; i++) { - pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i]; - } - - SK_U16_TO_NETWORK_ORDER( - SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]); - - for (i = 0; i < SK_PACKET_DATA_LEN; i++) { - pPacket->Data[i] = 0x00; - } - - Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ - pMb->Length = Length; - pMb->PortIdx = PortNumber; - Length -= 14; - SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]); - - if (PacketType == SK_PACKET_ALIVE) { - pAC->Rlmt.Port[PortNumber].TxHelloCts++; - } - } - - return (pMb); -} /* SkRlmtBuildPacket */ - - -/****************************************************************************** - * - * SkRlmtBuildSpanningTreePacket - build spanning tree check packet - * - * Description: - * This routine sets up a BPDU packet for spanning tree check. - * - * Context: - * runtime, pageable? - * - * Returns: - * NULL or pointer to RLMT mbuf - */ -RLMT_STATIC SK_MBUF *SkRlmtBuildSpanningTreePacket( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber) /* Sending port */ -{ - unsigned i; - SK_U16 Length; - SK_MBUF *pMb; - SK_SPTREE_PACKET *pSPacket; - - if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != - NULL) { - pSPacket = (SK_SPTREE_PACKET*)pMb->pData; - for (i = 0; i < SK_MAC_ADDR_LEN; i++) { - pSPacket->DstAddr[i] = BridgeMcAddr.a[i]; - pSPacket->SrcAddr[i] = - pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; - } - pSPacket->DSap = SK_RLMT_SPT_DSAP; - pSPacket->SSap = SK_RLMT_SPT_SSAP; - pSPacket->Ctrl = SK_RLMT_SPT_CTRL; - - pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0; - pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1; - pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID; - pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE; - pSPacket->Flags = SK_RLMT_SPT_FLAGS; - pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0; - pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1; - pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0; - pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1; - pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2; - pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3; - pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0; - pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1; - - /* - * Use logical MAC address as bridge ID and filter these packets - * on receive. - */ - for (i = 0; i < SK_MAC_ADDR_LEN; i++) { - pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] = - pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber]. - CurrentMacAddress.a[i]; - } - pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0; - pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1; - pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0; - pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1; - pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0; - pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1; - pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0; - pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1; - pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0; - pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1; - - Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ - pMb->Length = Length; - pMb->PortIdx = PortNumber; - Length -= 14; - SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]); - - pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++; - } - - return (pMb); -} /* SkRlmtBuildSpanningTreePacket */ - - -/****************************************************************************** - * - * SkRlmtSend - build and send check packets - * - * Description: - * Depending on the RLMT state and the checking state, several packets - * are sent through the indicated port. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing. - */ -RLMT_STATIC void SkRlmtSend( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber) /* Sending port */ -{ - unsigned j; - SK_EVPARA Para; - SK_RLMT_PORT *pRPort; - - pRPort = &pAC->Rlmt.Port[PortNumber]; - if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { - if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) { - /* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */ - if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, - SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, - &SkRlmtMcAddr)) != NULL) { - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - } - else { - /* - * Send a directed RLMT packet to all ports that are - * checked by the indicated port. - */ - for (j = 0; j < pRPort->PortsChecked; j++) { - if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, - SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, - &pRPort->PortCheck[j].CheckAddr)) != NULL) { - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - } - } - } - - if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && - (pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) { - /* - * Send a BPDU packet to make a connected switch tell us - * the correct root bridge. - */ - if ((Para.pParaPtr = - SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) { - pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG; - pRPort->RootIdSet = SK_FALSE; - - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX, - ("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber)) - } - } - return; -} /* SkRlmtSend */ - - -/****************************************************************************** - * - * SkRlmtPortReceives - check if port is (going) down and bring it up - * - * Description: - * This routine checks if a port who received a non-BPDU packet - * needs to go up or needs to be stopped going down. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing. - */ -RLMT_STATIC void SkRlmtPortReceives( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber) /* Port to check */ -{ - SK_RLMT_PORT *pRPort; - SK_EVPARA Para; - - pRPort = &pAC->Rlmt.Port[PortNumber]; - pRPort->PortNoRx = SK_FALSE; - - if ((pRPort->PortState == SK_RLMT_PS_DOWN) && - !(pRPort->CheckingState & SK_RLMT_PCS_TX)) { - /* - * Port is marked down (rx), but received a non-BPDU packet. - * Bring it up. - */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Received on PortDown.\n")) - - pRPort->PortState = SK_RLMT_PS_GOING_UP; - pRPort->GuTimeStamp = SkOsGetTime(pAC); - Para.Para32[0] = PortNumber; - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, - SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para); - pRPort->CheckingState &= ~SK_RLMT_PCS_RX; - /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - } /* PortDown && !SuspectTx */ - else if (pRPort->CheckingState & SK_RLMT_PCS_RX) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Stop bringing port down.\n")) - SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); - pRPort->CheckingState &= ~SK_RLMT_PCS_RX; - /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - } /* PortGoingDown */ - - return; -} /* SkRlmtPortReceives */ - - -/****************************************************************************** - * - * SkRlmtPacketReceive - receive a packet for closer examination - * - * Description: - * This routine examines a packet more closely than SK_RLMT_LOOKAHEAD. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing. - */ -RLMT_STATIC void SkRlmtPacketReceive( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_MBUF *pMb) /* Received packet */ -{ -#ifdef xDEBUG - extern void DumpData(char *p, int size); -#endif /* DEBUG */ - int i; - unsigned j; - SK_U16 PacketType; - SK_U32 PortNumber; - SK_ADDR_PORT *pAPort; - SK_RLMT_PORT *pRPort; - SK_RLMT_PACKET *pRPacket; - SK_SPTREE_PACKET *pSPacket; - SK_EVPARA Para; - - PortNumber = pMb->PortIdx; - pAPort = &pAC->Addr.Port[PortNumber]; - pRPort = &pAC->Rlmt.Port[PortNumber]; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber)) - - pRPacket = (SK_RLMT_PACKET*)pMb->pData; - pSPacket = (SK_SPTREE_PACKET*)pRPacket; - -#ifdef xDEBUG - DumpData((char *)pRPacket, 32); -#endif /* DEBUG */ - - if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) { - SkRlmtPortReceives(pAC, IoC, PortNumber); - } - - /* Check destination address. */ - - if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) && - !SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) && - !SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) { - - /* Not sent to current MAC or registered MC address => Trash it. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Not for me.\n")) - - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - return; - } - else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) { - - /* - * Was sent by same port (may happen during port switching - * or in case of duplicate MAC addresses). - */ - - /* - * Check for duplicate address here: - * If Packet.Random != My.Random => DupAddr. - */ - for (i = 3; i >= 0; i--) { - if (pRPort->Random[i] != pRPacket->Random[i]) { - break; - } - } - - /* - * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply - * packets (they have the LLC_COMMAND_RESPONSE_BIT set in - * pRPacket->SSap). - */ - if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP && - pRPacket->Ctrl == SK_RLMT_CTRL && - pRPacket->SSap == SK_RLMT_SSAP && - pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && - pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && - pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && - pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && - pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && - pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && - pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Duplicate MAC Address.\n")) - - /* Error Log entry. */ - SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG); - } - else { - /* Simply trash it. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Sent by me.\n")) - } - - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - return; - } - - /* Check SuspectTx entries. */ - if (pRPort->PortsSuspect > 0) { - for (j = 0; j < pRPort->PortsChecked; j++) { - if (pRPort->PortCheck[j].SuspectTx && - SK_ADDR_EQUAL( - pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) { - pRPort->PortCheck[j].SuspectTx = SK_FALSE; - pRPort->PortsSuspect--; - break; - } - } - } - - /* Determine type of packet. */ - if (pRPacket->DSap == SK_RLMT_DSAP && - pRPacket->Ctrl == SK_RLMT_CTRL && - (pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP && - pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && - pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && - pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && - pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && - pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && - pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && - pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { - - /* It's an RLMT packet. */ - PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) | - pRPacket->RlmtPacketType[1]); - - switch (PacketType) { - case SK_PACKET_ANNOUNCE: /* Not yet used. */ -#if 0 - /* Build the check chain. */ - SkRlmtBuildCheckChain(pAC); -#endif /* 0 */ - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Announce.\n")) - - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - break; - - case SK_PACKET_ALIVE: - if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Alive Reply.\n")) - - if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) || - SK_ADDR_EQUAL( - pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) { - /* Obviously we could send something. */ - if (pRPort->CheckingState & SK_RLMT_PCS_TX) { - pRPort->CheckingState &= ~SK_RLMT_PCS_TX; - SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); - } - - if ((pRPort->PortState == SK_RLMT_PS_DOWN) && - !(pRPort->CheckingState & SK_RLMT_PCS_RX)) { - pRPort->PortState = SK_RLMT_PS_GOING_UP; - pRPort->GuTimeStamp = SkOsGetTime(pAC); - - SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); - - Para.Para32[0] = PortNumber; - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->UpTimer, - SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT, - SK_RLMT_PORTUP_TIM, Para); - } - } - - /* Mark sending port as alive? */ - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - } - else { /* Alive Request Packet. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Alive Request.\n")) - - pRPort->RxHelloCts++; - - /* Answer. */ - for (i = 0; i < SK_MAC_ADDR_LEN; i++) { - pRPacket->DstAddr[i] = pRPacket->SrcAddr[i]; - pRPacket->SrcAddr[i] = - pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; - } - pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT; - - Para.pParaPtr = pMb; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - break; - - case SK_PACKET_CHECK_TX: - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Check your tx line.\n")) - - /* A port checking us requests us to check our tx line. */ - pRPort->CheckingState |= SK_RLMT_PCS_TX; - - /* Start PortDownTx timer. */ - Para.Para32[0] = PortNumber; - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->DownTxTimer, - SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, - SK_RLMT_PORTDOWN_TX_TIM, Para); - - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - - if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, - SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, - &SkRlmtMcAddr)) != NULL) { - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - break; - - case SK_PACKET_ADDR_CHANGED: - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Address Change.\n")) - - /* Build the check chain. */ - SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - break; - - default: - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Unknown RLMT packet.\n")) - - /* RA;:;: ??? */ - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - } - } - else if (pSPacket->DSap == SK_RLMT_SPT_DSAP && - pSPacket->Ctrl == SK_RLMT_SPT_CTRL && - (pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: BPDU Packet.\n")) - - /* Spanning Tree packet. */ - pRPort->RxSpHelloCts++; - - if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt. - Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) { - /* - * Check segmentation if a new root bridge is set and - * the segmentation check is not currently running. - */ - if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) && - (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && - (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) - != 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState & - SK_RLMT_RCS_SEG) == 0) { - pAC->Rlmt.Port[PortNumber].Net->CheckingState |= - SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; - } - - /* Store tree view of this port. */ - for (i = 0; i < 8; i++) { - pRPort->Root.Id[i] = pSPacket->RootId[i]; - } - pRPort->RootIdSet = SK_TRUE; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, - ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", - PortNumber, - pRPort->Root.Id[0], pRPort->Root.Id[1], - pRPort->Root.Id[2], pRPort->Root.Id[3], - pRPort->Root.Id[4], pRPort->Root.Id[5], - pRPort->Root.Id[6], pRPort->Root.Id[7])) - } - - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState & - SK_RLMT_RCS_REPORT_SEG) != 0) { - SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber); - } - } - else { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, - ("SkRlmtPacketReceive: Unknown Packet Type.\n")) - - /* Unknown packet. */ - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - } - return; -} /* SkRlmtPacketReceive */ - - -/****************************************************************************** - * - * SkRlmtCheckPort - check if a port works - * - * Description: - * This routine checks if a port whose link is up received something - * and if it seems to transmit successfully. - * - * # PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp - * # PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg - * # RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg - * - * if (Rx - RxBpdu == 0) { # No rx. - * if (state == PsUp) { - * PortCheckingState |= ChkRx - * } - * if (ModeCheckSeg && (Timeout == - * TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) { - * RlmtCheckingState |= ChkSeg) - * PortCheckingState |= ChkSeg - * } - * NewTimeout = TO_SHORTEN(Timeout) - * if (NewTimeout < RLMT_MIN_TIMEOUT) { - * NewTimeout = RLMT_MIN_TIMEOUT - * PortState = PsDown - * ... - * } - * } - * else { # something was received - * # Set counter to 0 at LinkDown? - * # No - rx may be reported after LinkDown ??? - * PortCheckingState &= ~ChkRx - * NewTimeout = RLMT_DEFAULT_TIMEOUT - * if (RxAck == 0) { - * possible reasons: - * is my tx line bad? -- - * send RLMT multicast and report - * back internally? (only possible - * between ports on same adapter) - * } - * if (RxChk == 0) { - * possible reasons: - * - tx line of port set to check me - * maybe bad - * - no other port/adapter available or set - * to check me - * - adapter checking me has a longer - * timeout - * ??? anything that can be done here? - * } - * } - * - * Context: - * runtime, pageable? - * - * Returns: - * New timeout value. - */ -RLMT_STATIC SK_U32 SkRlmtCheckPort( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber) /* Port to check */ -{ - unsigned i; - SK_U32 NewTimeout; - SK_RLMT_PORT *pRPort; - SK_EVPARA Para; - - pRPort = &pAC->Rlmt.Port[PortNumber]; - - if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n", - PortNumber, pRPort->PacketsPerTimeSlot)) - - /* - * Check segmentation if there was no receive at least twice - * in a row (PortNoRx is already set) and the segmentation - * check is not currently running. - */ - - if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && - (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && - !(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) { - pAC->Rlmt.Port[PortNumber].Net->CheckingState |= - SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n", - pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX)) - - if (pRPort->PortState != SK_RLMT_PS_DOWN) { - NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue); - if (NewTimeout < SK_RLMT_MIN_TO_VAL) { - NewTimeout = SK_RLMT_MIN_TO_VAL; - } - - if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) { - Para.Para32[0] = PortNumber; - pRPort->CheckingState |= SK_RLMT_PCS_RX; - - /* - * What shall we do if the port checked by this one receives - * our request frames? What's bad - our rx line or his tx line? - */ - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->DownRxTimer, - SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, - SK_RLMT_PORTDOWN_RX_TIM, Para); - - for (i = 0; i < pRPort->PortsChecked; i++) { - if (pRPort->PortCheck[i].SuspectTx) { - continue; - } - pRPort->PortCheck[i].SuspectTx = SK_TRUE; - pRPort->PortsSuspect++; - if ((Para.pParaPtr = - SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX, - &pAC->Addr.Port[PortNumber].CurrentMacAddress, - &pRPort->PortCheck[i].CheckAddr)) != NULL) { - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - } - } - } - else { /* PortDown -- or all partners suspect. */ - NewTimeout = SK_RLMT_DEF_TO_VAL; - } - pRPort->PortNoRx = SK_TRUE; - } - else { /* A non-BPDU packet was received. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n", - PortNumber, - pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot, - pRPort->PacketsPerTimeSlot)) - - SkRlmtPortReceives(pAC, IoC, PortNumber); - if (pAC->Rlmt.CheckSwitch) { - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - } - - NewTimeout = SK_RLMT_DEF_TO_VAL; - } - - return (NewTimeout); -} /* SkRlmtCheckPort */ - - -/****************************************************************************** - * - * SkRlmtSelectBcRx - select new active port, criteria 1 (CLP) - * - * Description: - * This routine selects the port that received a broadcast frame - * substantially later than all other ports. - * - * Context: - * runtime, pageable? - * - * Returns: - * SK_BOOL - */ -RLMT_STATIC SK_BOOL SkRlmtSelectBcRx( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Active, /* Active port */ -SK_U32 PrefPort, /* Preferred port */ -SK_U32 *pSelect) /* New active port */ -{ - SK_U64 BcTimeStamp; - SK_U32 i; - SK_BOOL PortFound; - - BcTimeStamp = 0; /* Not totally necessary, but feeling better. */ - PortFound = SK_FALSE; - - /* Select port with the latest TimeStamp. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n", - i, - pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx, - *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32), - *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32))) - - if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) { - if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) { - BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp; - *pSelect = i; - PortFound = SK_TRUE; - } - } - } - - if (PortFound) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Port %d received the last broadcast.\n", *pSelect)) - - /* Look if another port's time stamp is similar. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (i == *pSelect) { - continue; - } - if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx && - (pAC->Rlmt.Port[i].BcTimeStamp > - BcTimeStamp - SK_RLMT_BC_DELTA || - pAC->Rlmt.Port[i].BcTimeStamp + - SK_RLMT_BC_DELTA > BcTimeStamp)) { - PortFound = SK_FALSE; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Port %d received a broadcast at a similar time.\n", i)) - break; - } - } - } - -#ifdef DEBUG - if (PortFound) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially " - "latest broadcast (%u).\n", - *pSelect, - BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp)) - } -#endif /* DEBUG */ - - return (PortFound); -} /* SkRlmtSelectBcRx */ - - -/****************************************************************************** - * - * SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP) - * - * Description: - * This routine selects a good port (it is PortUp && !SuspectRx). - * - * Context: - * runtime, pageable? - * - * Returns: - * SK_BOOL - */ -RLMT_STATIC SK_BOOL SkRlmtSelectNotSuspect( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Active, /* Active port */ -SK_U32 PrefPort, /* Preferred port */ -SK_U32 *pSelect) /* New active port */ -{ - SK_U32 i; - SK_BOOL PortFound; - - PortFound = SK_FALSE; - - /* Select first port that is PortUp && !SuspectRx. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (!pAC->Rlmt.Port[i].PortDown && - !(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) { - *pSelect = i; - if (!pAC->Rlmt.Port[Active].PortDown && - !(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) { - *pSelect = Active; - } - if (!pAC->Rlmt.Port[PrefPort].PortDown && - !(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) { - *pSelect = PrefPort; - } - PortFound = SK_TRUE; - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n", - *pSelect)) - break; - } - } - return (PortFound); -} /* SkRlmtSelectNotSuspect */ - - -/****************************************************************************** - * - * SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP) - * - * Description: - * This routine selects a port that is up. - * - * Context: - * runtime, pageable? - * - * Returns: - * SK_BOOL - */ -RLMT_STATIC SK_BOOL SkRlmtSelectUp( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Active, /* Active port */ -SK_U32 PrefPort, /* Preferred port */ -SK_U32 *pSelect, /* New active port */ -SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ -{ - SK_U32 i; - SK_BOOL PortFound; - - PortFound = SK_FALSE; - - /* Select first port that is PortUp. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP && - pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { - *pSelect = i; - if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP && - pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { - *pSelect = Active; - } - if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP && - pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { - *pSelect = PrefPort; - } - PortFound = SK_TRUE; - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect)) - break; - } - } - return (PortFound); -} /* SkRlmtSelectUp */ - - -/****************************************************************************** - * - * SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP) - * - * Description: - * This routine selects the port that is going up for the longest time. - * - * Context: - * runtime, pageable? - * - * Returns: - * SK_BOOL - */ -RLMT_STATIC SK_BOOL SkRlmtSelectGoingUp( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Active, /* Active port */ -SK_U32 PrefPort, /* Preferred port */ -SK_U32 *pSelect, /* New active port */ -SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ -{ - SK_U64 GuTimeStamp; - SK_U32 i; - SK_BOOL PortFound; - - GuTimeStamp = 0; - PortFound = SK_FALSE; - - /* Select port that is PortGoingUp for the longest time. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && - pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { - GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; - *pSelect = i; - PortFound = SK_TRUE; - break; - } - } - - if (!PortFound) { - return (SK_FALSE); - } - - for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && - pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp && - pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { - GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; - *pSelect = i; - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect)) - return (SK_TRUE); -} /* SkRlmtSelectGoingUp */ - - -/****************************************************************************** - * - * SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP) - * - * Description: - * This routine selects a port that is down. - * - * Context: - * runtime, pageable? - * - * Returns: - * SK_BOOL - */ -RLMT_STATIC SK_BOOL SkRlmtSelectDown( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Active, /* Active port */ -SK_U32 PrefPort, /* Preferred port */ -SK_U32 *pSelect, /* New active port */ -SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ -{ - SK_U32 i; - SK_BOOL PortFound; - - PortFound = SK_FALSE; - - /* Select first port that is PortDown. */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN && - pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { - *pSelect = i; - if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN && - pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { - *pSelect = Active; - } - if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN && - pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { - *pSelect = PrefPort; - } - PortFound = SK_TRUE; - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect)) - break; - } - } - return (PortFound); -} /* SkRlmtSelectDown */ - - -/****************************************************************************** - * - * SkRlmtCheckSwitch - select new active port and switch to it - * - * Description: - * This routine decides which port should be the active one and queues - * port switching if necessary. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing. - */ -RLMT_STATIC void SkRlmtCheckSwitch( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 NetIdx) /* Net index */ -{ - SK_EVPARA Para; - SK_U32 Active; - SK_U32 PrefPort; - SK_U32 i; - SK_BOOL PortFound; - - Active = pAC->Rlmt.Net[NetIdx].ActivePort; /* Index of active port. */ - PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort; /* Index of preferred port. */ - PortFound = SK_FALSE; - pAC->Rlmt.CheckSwitch = SK_FALSE; - -#if 0 /* RW 2001/10/18 - active port becomes always prefered one */ - if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */ - /* disable auto-fail back */ - PrefPort = Active; - } -#endif - - if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) { - /* Last link went down - shut down the net. */ - pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN; - Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP; - Para.Para32[1] = NetIdx; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para); - - Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. - Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; - Para.Para32[1] = NetIdx; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); - return; - } /* pAC->Rlmt.LinksUp == 0 */ - else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 && - pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) { - /* First link came up - get the net up. */ - pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP; - - /* - * If pAC->Rlmt.ActivePort != Para.Para32[0], - * the DRV switches to the port that came up. - */ - for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { - if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { - if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) { - i = Active; - } - if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) { - i = PrefPort; - } - PortFound = SK_TRUE; - break; - } - } - - if (PortFound) { - Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; - Para.Para32[1] = NetIdx; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); - - pAC->Rlmt.Net[NetIdx].ActivePort = i; - Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; - Para.Para32[1] = NetIdx; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para); - - if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && - (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, - pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber, - SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx]. - CurrentMacAddress, &SkRlmtMcAddr)) != NULL) { - /* - * Send announce packet to RLMT multicast address to force - * switches to learn the new location of the logical MAC address. - */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } - } - else { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG); - } - - return; - } /* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */ - else { /* Cannot be reached in dual-net mode. */ - Para.Para32[0] = Active; - - /* - * Preselection: - * If RLMT Mode != CheckLinkState - * select port that received a broadcast frame substantially later - * than all other ports - * else select first port that is not SuspectRx - * else select first port that is PortUp - * else select port that is PortGoingUp for the longest time - * else select first port that is PortDown - * else stop. - * - * For the preselected port: - * If ActivePort is equal in quality, select ActivePort. - * - * If PrefPort is equal in quality, select PrefPort. - * - * If ActivePort != SelectedPort, - * If old ActivePort is LinkDown, - * SwitchHard - * else - * SwitchSoft - */ - /* check of ChgBcPrio flag added */ - if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && - (!pAC->Rlmt.Net[0].ChgBcPrio)) { - - if (!PortFound) { - PortFound = SkRlmtSelectBcRx( - pAC, IoC, Active, PrefPort, &Para.Para32[1]); - } - - if (!PortFound) { - PortFound = SkRlmtSelectNotSuspect( - pAC, IoC, Active, PrefPort, &Para.Para32[1]); - } - } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ - - /* with changed priority for last broadcast received */ - if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && - (pAC->Rlmt.Net[0].ChgBcPrio)) { - if (!PortFound) { - PortFound = SkRlmtSelectNotSuspect( - pAC, IoC, Active, PrefPort, &Para.Para32[1]); - } - - if (!PortFound) { - PortFound = SkRlmtSelectBcRx( - pAC, IoC, Active, PrefPort, &Para.Para32[1]); - } - } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ - - if (!PortFound) { - PortFound = SkRlmtSelectUp( - pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); - } - - if (!PortFound) { - PortFound = SkRlmtSelectUp( - pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); - } - - if (!PortFound) { - PortFound = SkRlmtSelectGoingUp( - pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); - } - - if (!PortFound) { - PortFound = SkRlmtSelectGoingUp( - pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); - } - - if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) { - if (!PortFound) { - PortFound = SkRlmtSelectDown(pAC, IoC, - Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); - } - - if (!PortFound) { - PortFound = SkRlmtSelectDown(pAC, IoC, - Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); - } - } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ - - if (PortFound) { - - if (Para.Para32[1] != Active) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Active: %d, Para1: %d.\n", Active, Para.Para32[1])) - pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1]; - Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. - Port[Para.Para32[0]]->PortNumber; - Para.Para32[1] = pAC->Rlmt.Net[NetIdx]. - Port[Para.Para32[1]]->PortNumber; - SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE); - if (pAC->Rlmt.Port[Active].LinkDown) { - SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para); - } - else { - SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); - SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para); - } - Para.Para32[1] = NetIdx; - Para.Para32[0] = - pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); - Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. - Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); - if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && - (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], - SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress, - &SkRlmtMcAddr)) != NULL) { - /* - * Send announce packet to RLMT multicast address to force - * switches to learn the new location of the logical - * MAC address. - */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); - } /* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */ - } /* Para.Para32[1] != Active */ - } /* PortFound */ - else { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG); - } - } /* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */ - return; -} /* SkRlmtCheckSwitch */ - - -/****************************************************************************** - * - * SkRlmtCheckSeg - Report if segmentation is detected - * - * Description: - * This routine checks if the ports see different root bridges and reports - * segmentation in such a case. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing. - */ -RLMT_STATIC void SkRlmtCheckSeg( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 NetIdx) /* Net number */ -{ - SK_EVPARA Para; - SK_RLMT_NET *pNet; - SK_U32 i, j; - SK_BOOL Equal; - - pNet = &pAC->Rlmt.Net[NetIdx]; - pNet->RootIdSet = SK_FALSE; - Equal = SK_TRUE; - - for (i = 0; i < pNet->NumPorts; i++) { - if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) { - continue; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, - ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i, - pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1], - pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3], - pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5], - pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7])) - - if (!pNet->RootIdSet) { - pNet->Root = pNet->Port[i]->Root; - pNet->RootIdSet = SK_TRUE; - continue; - } - - for (j = 0; j < 8; j ++) { - Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j]; - if (!Equal) { - break; - } - } - - if (!Equal) { - SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG); - Para.Para32[0] = NetIdx; - Para.Para32[1] = (SK_U32)-1; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para); - - pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG; - - /* 2000-03-06 RA: New. */ - Para.Para32[0] = NetIdx; - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL, - SKGE_RLMT, SK_RLMT_SEG_TIM, Para); - break; - } - } /* for (i = 0; i < pNet->NumPorts; i++) */ - - /* 2000-03-06 RA: Moved here. */ - /* Segmentation check not running anymore. */ - pNet->CheckingState &= ~SK_RLMT_RCS_SEG; - -} /* SkRlmtCheckSeg */ - - -/****************************************************************************** - * - * SkRlmtPortStart - initialize port variables and start port - * - * Description: - * This routine initializes a port's variables and issues a PORT_START - * to the HWAC module. This handles retries if the start fails or the - * link eventually goes down. - * - * Context: - * runtime, pageable? - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtPortStart( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 PortNumber) /* Port number */ -{ - SK_EVPARA Para; - - pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN; - pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE; - pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE; - pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE; - pAC->Rlmt.Port[PortNumber].CheckingState = 0; - pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; - Para.Para32[0] = PortNumber; - Para.Para32[1] = (SK_U32)-1; - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); -} /* SkRlmtPortStart */ - - -/****************************************************************************** - * - * SkRlmtEvtPortStartTim - PORT_START_TIM - * - * Description: - * This routine handles PORT_START_TIM events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPortStartTim( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ -{ - SK_U32 i; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n")) - return; - } - - /* - * Used to start non-preferred ports if the preferred one - * does not come up. - * This timeout needs only be set when starting the first - * (preferred) port. - */ - if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { - /* PORT_START failed. */ - for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) { - if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) { - SkRlmtPortStart(pAC, IoC, - pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber); - } - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTSTART_TIMEOUT Event END.\n")) -} /* SkRlmtEvtPortStartTim */ - - -/****************************************************************************** - * - * SkRlmtEvtLinkUp - LINK_UP - * - * Description: - * This routine handles LLINK_UP events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtLinkUp( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ -{ - SK_U32 i; - SK_RLMT_PORT *pRPort; - SK_EVPARA Para2; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0])) - - pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; - if (!pRPort->PortStarted) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG); - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_UP Event EMPTY.\n")) - return; - } - - if (!pRPort->LinkDown) { - /* RA;:;: Any better solution? */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_UP Event EMPTY.\n")) - return; - } - - SkTimerStop(pAC, IoC, &pRPort->UpTimer); - SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); - SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); - - /* Do something if timer already fired? */ - - pRPort->LinkDown = SK_FALSE; - pRPort->PortState = SK_RLMT_PS_GOING_UP; - pRPort->GuTimeStamp = SkOsGetTime(pAC); - pRPort->BcTimeStamp = 0; - pRPort->Net->LinksUp++; - if (pRPort->Net->LinksUp == 1) { - SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE); - } - else { - SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); - } - - for (i = 0; i < pRPort->Net->NumPorts; i++) { - if (!pRPort->Net->Port[i]->PortStarted) { - SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber); - } - } - - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - - if (pRPort->Net->LinksUp >= 2) { - if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { - /* Build the check chain. */ - SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); - } - } - - /* If the first link comes up, start the periodical RLMT timeout. */ - if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 && - (pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) { - Para2.Para32[0] = pRPort->Net->NetNumber; - Para2.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer, - pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2); - } - - Para2 = Para; - Para2.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, - SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2); - - /* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */ - if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 && - (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 && - (Para2.pParaPtr = - SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE, - &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr) - ) != NULL) { - /* Send "new" packet to RLMT multicast address. */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); - } - - if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) { - if ((Para2.pParaPtr = - SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) { - pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE; - pRPort->Net->CheckingState |= - SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; - - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); - - Para.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer, - SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_UP Event END.\n")) -} /* SkRlmtEvtLinkUp */ - - -/****************************************************************************** - * - * SkRlmtEvtPortUpTim - PORT_UP_TIM - * - * Description: - * This routine handles PORT_UP_TIM events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPortUpTim( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ -{ - SK_RLMT_PORT *pRPort; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTUP_TIM Event EMPTY.\n")) - return; - } - - pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; - if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0])) - return; - } - - pRPort->PortDown = SK_FALSE; - pRPort->PortState = SK_RLMT_PS_UP; - pRPort->Net->PortsUp++; - if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { - if (pAC->Rlmt.NumNets <= 1) { - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - } - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para); - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTUP_TIM Event END.\n")) -} /* SkRlmtEvtPortUpTim */ - - -/****************************************************************************** - * - * SkRlmtEvtPortDownTim - PORT_DOWN_* - * - * Description: - * This routine handles PORT_DOWN_* events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPortDownX( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Event, /* Event code */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ -{ - SK_RLMT_PORT *pRPort; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n", - Para.Para32[0], Event)) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTDOWN* Event EMPTY.\n")) - return; - } - - pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; - if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM && - !(pRPort->CheckingState & SK_RLMT_PCS_TX))) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event)) - return; - } - - /* Stop port's timers. */ - SkTimerStop(pAC, IoC, &pRPort->UpTimer); - SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); - SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); - - if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) { - pRPort->PortState = SK_RLMT_PS_DOWN; - } - - if (!pRPort->PortDown) { - pRPort->Net->PortsUp--; - pRPort->PortDown = SK_TRUE; - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para); - } - - pRPort->PacketsPerTimeSlot = 0; - /* pRPort->DataPacketsPerTimeSlot = 0; */ - pRPort->BpduPacketsPerTimeSlot = 0; - pRPort->BcTimeStamp = 0; - - /* - * RA;:;: To be checked: - * - actions at RLMT_STOP: We should not switch anymore. - */ - if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { - if (Para.Para32[0] == - pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) { - /* Active Port went down. */ - SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event)) -} /* SkRlmtEvtPortDownX */ - - -/****************************************************************************** - * - * SkRlmtEvtLinkDown - LINK_DOWN - * - * Description: - * This routine handles LINK_DOWN events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtLinkDown( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ -{ - SK_RLMT_PORT *pRPort; - - pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0])) - - if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { - pRPort->Net->LinksUp--; - pRPort->LinkDown = SK_TRUE; - pRPort->PortState = SK_RLMT_PS_LINK_DOWN; - SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF); - - if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) { - /* Build the check chain. */ - SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); - } - - /* Ensure that port is marked down. */ - Para.Para32[1] = -1; - (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para); - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_LINK_DOWN Event END.\n")) -} /* SkRlmtEvtLinkDown */ - - -/****************************************************************************** - * - * SkRlmtEvtPortAddr - PORT_ADDR - * - * Description: - * This routine handles PORT_ADDR events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPortAddr( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ -{ - SK_U32 i, j; - SK_RLMT_PORT *pRPort; - SK_MAC_ADDR *pOldMacAddr; - SK_MAC_ADDR *pNewMacAddr; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORT_ADDR Event EMPTY.\n")) - return; - } - - /* Port's physical MAC address changed. */ - pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress; - pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress; - - /* - * NOTE: This is not scalable for solutions where ports are - * checked remotely. There, we need to send an RLMT - * address change packet - and how do we ensure delivery? - */ - for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { - pRPort = &pAC->Rlmt.Port[i]; - for (j = 0; j < pRPort->PortsChecked; j++) { - if (SK_ADDR_EQUAL( - pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) { - pRPort->PortCheck[j].CheckAddr = *pNewMacAddr; - } - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PORT_ADDR Event END.\n")) -} /* SkRlmtEvtPortAddr */ - - -/****************************************************************************** - * - * SkRlmtEvtStart - START - * - * Description: - * This routine handles START events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtStart( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ - SK_EVPARA Para2; - SK_U32 PortIdx; - SK_U32 PortNumber; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[0])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Event EMPTY.\n")) - return; - } - - if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Event EMPTY.\n")) - return; - } - - if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("All nets should have been started.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Event EMPTY.\n")) - return; - } - - if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >= - pAC->Rlmt.Net[Para.Para32[0]].NumPorts) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG); - - /* Change PrefPort to internal default. */ - Para2.Para32[0] = 0xFFFFFFFF; - Para2.Para32[1] = Para.Para32[0]; - (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2); - } - - PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort; - PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber; - - pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0; - pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0; - pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0; - pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN; - - /* Start preferred port. */ - SkRlmtPortStart(pAC, IoC, PortNumber); - - /* Start Timer (for first port only). */ - Para2.Para32[0] = PortNumber; - Para2.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer, - SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2); - - pAC->Rlmt.NetsStarted++; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_START Event END.\n")) -} /* SkRlmtEvtStart */ - - -/****************************************************************************** - * - * SkRlmtEvtStop - STOP - * - * Description: - * This routine handles STOP events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtStop( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ - SK_EVPARA Para2; - SK_U32 PortNumber; - SK_U32 i; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[0])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Event EMPTY.\n")) - return; - } - - if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Event EMPTY.\n")) - return; - } - - if (pAC->Rlmt.NetsStarted == 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("All nets are stopped.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Event EMPTY.\n")) - return; - } - - /* Stop RLMT timers. */ - SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer); - SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer); - - /* Stop net. */ - pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT; - pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE; - Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL; - Para2.Para32[1] = Para.Para32[0]; /* Net# */ - SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2); - - /* Stop ports. */ - for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { - PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; - if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) { - SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer); - SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer); - SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer); - - pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT; - pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; - pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE; - Para2.Para32[0] = PortNumber; - Para2.Para32[1] = (SK_U32)-1; - SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2); - } - } - - pAC->Rlmt.NetsStarted--; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STOP Event END.\n")) -} /* SkRlmtEvtStop */ - - -/****************************************************************************** - * - * SkRlmtEvtTim - TIM - * - * Description: - * This routine handles TIM events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtTim( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ - SK_RLMT_PORT *pRPort; - SK_U32 Timeout; - SK_U32 NewTimeout; - SK_U32 PortNumber; - SK_U32 i; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_TIM Event BEGIN.\n")) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_TIM Event EMPTY.\n")) - return; - } - - if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 || - pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) { - /* Mode changed or all links down: No more link checking. */ - return; - } - -#if 0 - pAC->Rlmt.SwitchCheckCounter--; - if (pAC->Rlmt.SwitchCheckCounter == 0) { - pAC->Rlmt.SwitchCheckCounter; - } -#endif /* 0 */ - - NewTimeout = SK_RLMT_DEF_TO_VAL; - for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { - PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; - pRPort = &pAC->Rlmt.Port[PortNumber]; - if (!pRPort->LinkDown) { - Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber); - if (Timeout < NewTimeout) { - NewTimeout = Timeout; - } - - /* - * These counters should be set to 0 for all ports before the - * first frame is sent in the next loop. - */ - pRPort->PacketsPerTimeSlot = 0; - /* pRPort->DataPacketsPerTimeSlot = 0; */ - pRPort->BpduPacketsPerTimeSlot = 0; - } - } - pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout; - - if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) { - /* - * If checking remote ports, also send packets if - * (LinksUp == 1) && - * this port checks at least one (remote) port. - */ - - /* - * Must be new loop, as SkRlmtCheckPort can request to - * check segmentation when e.g. checking the last port. - */ - for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { - if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) { - SkRlmtSend(pAC, IoC, - pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber); - } - } - } - - SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer, - pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, - Para); - - if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 && - (pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) && - (pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) { - SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer, - SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); - pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG; - pAC->Rlmt.Net[Para.Para32[0]].CheckingState |= - SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_TIM Event END.\n")) -} /* SkRlmtEvtTim */ - - -/****************************************************************************** - * - * SkRlmtEvtSegTim - SEG_TIM - * - * Description: - * This routine handles SEG_TIM events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtSegTim( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ -#ifdef xDEBUG - int j; -#endif /* DEBUG */ - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SEG_TIM Event BEGIN.\n")) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SEG_TIM Event EMPTY.\n")) - return; - } - -#ifdef xDEBUG - for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) { - SK_ADDR_PORT *pAPort; - SK_U32 k; - SK_U16 *InAddr; - SK_U8 InAddr8[6]; - - InAddr = (SK_U16 *)&InAddr8[0]; - pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort; - for (k = 0; k < pAPort->NextExactMatchRlmt; k++) { - /* Get exact match address k from port j. */ - XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, - XM_EXM(k), InAddr); - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x.\n", - k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, - InAddr8[0], InAddr8[1], InAddr8[2], - InAddr8[3], InAddr8[4], InAddr8[5], - pAPort->Exact[k].a[0], pAPort->Exact[k].a[1], - pAPort->Exact[k].a[2], pAPort->Exact[k].a[3], - pAPort->Exact[k].a[4], pAPort->Exact[k].a[5])) - } - } -#endif /* xDEBUG */ - - SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]); - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SEG_TIM Event END.\n")) -} /* SkRlmtEvtSegTim */ - - -/****************************************************************************** - * - * SkRlmtEvtPacketRx - PACKET_RECEIVED - * - * Description: - * This routine handles PACKET_RECEIVED events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPacketRx( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_MBUF *pMb */ -{ - SK_MBUF *pMb; - SK_MBUF *pNextMb; - SK_U32 NetNumber; - - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n")) - - /* Should we ignore frames during port switching? */ - -#ifdef DEBUG - pMb = Para.pParaPtr; - if (pMb == NULL) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n")) - } - else if (pMb->pNext != NULL) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("More than one mbuf or pMb->pNext not set.\n")) - } -#endif /* DEBUG */ - - for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) { - pNextMb = pMb->pNext; - pMb->pNext = NULL; - - NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber; - if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) { - SkDrvFreeRlmtMbuf(pAC, IoC, pMb); - } - else { - SkRlmtPacketReceive(pAC, IoC, pMb); - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PACKET_RECEIVED Event END.\n")) -} /* SkRlmtEvtPacketRx */ - - -/****************************************************************************** - * - * SkRlmtEvtStatsClear - STATS_CLEAR - * - * Description: - * This routine handles STATS_CLEAR events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtStatsClear( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ - SK_U32 i; - SK_RLMT_PORT *pRPort; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_CLEAR Event BEGIN.\n")) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[0])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) - return; - } - - /* Clear statistics for logical and physical ports. */ - for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { - pRPort = - &pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber]; - pRPort->TxHelloCts = 0; - pRPort->RxHelloCts = 0; - pRPort->TxSpHelloReqCts = 0; - pRPort->RxSpHelloCts = 0; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_CLEAR Event END.\n")) -} /* SkRlmtEvtStatsClear */ - - -/****************************************************************************** - * - * SkRlmtEvtStatsUpdate - STATS_UPDATE - * - * Description: - * This routine handles STATS_UPDATE events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtStatsUpdate( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_UPDATE Event BEGIN.\n")) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[0])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) - return; - } - - /* Update statistics - currently always up-to-date. */ - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_STATS_UPDATE Event END.\n")) -} /* SkRlmtEvtStatsUpdate */ - - -/****************************************************************************** - * - * SkRlmtEvtPrefportChange - PREFPORT_CHANGE - * - * Description: - * This routine handles PREFPORT_CHANGE events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtPrefportChange( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 PortIndex; SK_U32 NetNumber */ -{ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0])) - - if (Para.Para32[1] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[1])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) - return; - } - - /* 0xFFFFFFFF == auto-mode. */ - if (Para.Para32[0] == 0xFFFFFFFF) { - pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT; - } - else { - if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) { - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG); - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) - return; - } - - pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0]; - } - - pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0]; - - if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { - SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]); - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_PREFPORT_CHANGE Event END.\n")) -} /* SkRlmtEvtPrefportChange */ - - -/****************************************************************************** - * - * SkRlmtEvtSetNets - SET_NETS - * - * Description: - * This routine handles SET_NETS events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtSetNets( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NumNets; SK_U32 -1 */ -{ - int i; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event BEGIN.\n")) - - if (Para.Para32[1] != (SK_U32)-1) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad Parameter.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS || - Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad number of nets: %d.\n", Para.Para32[0])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] == pAC->Rlmt.NumNets) { /* No change. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event EMPTY.\n")) - return; - } - - /* Entering and leaving dual mode only allowed while nets are stopped. */ - if (pAC->Rlmt.NetsStarted > 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Changing dual mode only allowed while all nets are stopped.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event EMPTY.\n")) - return; - } - - if (Para.Para32[0] == 1) { - if (pAC->Rlmt.NumNets > 1) { - /* Clear logical MAC addr from second net's active port. */ - (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. - Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL); - pAC->Rlmt.Net[1].NumPorts = 0; - } - - pAC->Rlmt.NumNets = Para.Para32[0]; - for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { - pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; - pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; - pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ - pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; - /* Just assuming. */ - pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; - pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; - pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; - pAC->Rlmt.Net[i].NetNumber = i; - } - - pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0]; - pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; - - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("RLMT: Changed to one net with two ports.\n")) - } - else if (Para.Para32[0] == 2) { - pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1]; - pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1; - pAC->Rlmt.Net[0].NumPorts = - pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts; - - pAC->Rlmt.NumNets = Para.Para32[0]; - for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { - pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; - pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; - pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ - pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; - /* Just assuming. */ - pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; - pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; - pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; - - pAC->Rlmt.Net[i].NetNumber = i; - } - - /* Set logical MAC addr on second net's active port. */ - (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. - Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL); - - SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("RLMT: Changed to two nets with one port each.\n")) - } - else { - /* Not implemented for more than two nets. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SetNets not implemented for more than two nets.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event EMPTY.\n")) - return; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_SET_NETS Event END.\n")) -} /* SkRlmtSetNets */ - - -/****************************************************************************** - * - * SkRlmtEvtModeChange - MODE_CHANGE - * - * Description: - * This routine handles MODE_CHANGE events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * Nothing - */ -RLMT_STATIC void SkRlmtEvtModeChange( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_EVPARA Para) /* SK_U32 NewMode; SK_U32 NetNumber */ -{ - SK_EVPARA Para2; - SK_U32 i; - SK_U32 PrevRlmtMode; - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_MODE_CHANGE Event BEGIN.\n")) - - if (Para.Para32[1] >= pAC->Rlmt.NumNets) { - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Bad NetNumber %d.\n", Para.Para32[1])) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) - return; - } - - Para.Para32[0] |= SK_RLMT_CHECK_LINK; - - if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) && - Para.Para32[0] != SK_RLMT_MODE_CLS) { - pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS; - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Forced RLMT mode to CLS on single port net.\n")) - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) - return; - } - - /* Update RLMT mode. */ - PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode; - pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0]; - - if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) != - (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { - /* SK_RLMT_CHECK_LOC_LINK bit changed. */ - if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 && - pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 && - pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) { - /* 20001207 RA: Was "PortsUp == 1". */ - Para2.Para32[0] = Para.Para32[1]; - Para2.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer, - pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue, - SKGE_RLMT, SK_RLMT_TIM, Para2); - } - } - - if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) != - (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) { - /* SK_RLMT_CHECK_SEG bit changed. */ - for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) { - (void)SkAddrMcClear(pAC, IoC, - pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, - SK_ADDR_PERMANENT | SK_MC_SW_ONLY); - - /* Add RLMT MC address. */ - (void)SkAddrMcAdd(pAC, IoC, - pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, - &SkRlmtMcAddr, SK_ADDR_PERMANENT); - - if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & - SK_RLMT_CHECK_SEG) != 0) { - /* Add BPDU MC address. */ - (void)SkAddrMcAdd(pAC, IoC, - pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, - &BridgeMcAddr, SK_ADDR_PERMANENT); - - if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { - if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown && - (Para2.pParaPtr = SkRlmtBuildSpanningTreePacket( - pAC, IoC, i)) != NULL) { - pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet = - SK_FALSE; - SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); - } - } - } - (void)SkAddrMcUpdate(pAC, IoC, - pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber); - } /* for ... */ - - if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) { - Para2.Para32[0] = Para.Para32[1]; - Para2.Para32[1] = (SK_U32)-1; - SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer, - SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2); - } - } /* SK_RLMT_CHECK_SEG bit changed. */ - - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("SK_RLMT_MODE_CHANGE Event END.\n")) -} /* SkRlmtEvtModeChange */ - - -/****************************************************************************** - * - * SkRlmtEvent - a PORT- or an RLMT-specific event happened - * - * Description: - * This routine calls subroutines to handle PORT- and RLMT-specific events. - * - * Context: - * runtime, pageable? - * may be called after SK_INIT_IO - * - * Returns: - * 0 - */ -int SkRlmtEvent( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -SK_U32 Event, /* Event code */ -SK_EVPARA Para) /* Event-specific parameter */ -{ - switch (Event) { - - /* ----- PORT events ----- */ - - case SK_RLMT_PORTSTART_TIM: /* From RLMT via TIME. */ - SkRlmtEvtPortStartTim(pAC, IoC, Para); - break; - case SK_RLMT_LINK_UP: /* From SIRQ. */ - SkRlmtEvtLinkUp(pAC, IoC, Para); - break; - case SK_RLMT_PORTUP_TIM: /* From RLMT via TIME. */ - SkRlmtEvtPortUpTim(pAC, IoC, Para); - break; - case SK_RLMT_PORTDOWN: /* From RLMT. */ - case SK_RLMT_PORTDOWN_RX_TIM: /* From RLMT via TIME. */ - case SK_RLMT_PORTDOWN_TX_TIM: /* From RLMT via TIME. */ - SkRlmtEvtPortDownX(pAC, IoC, Event, Para); - break; - case SK_RLMT_LINK_DOWN: /* From SIRQ. */ - SkRlmtEvtLinkDown(pAC, IoC, Para); - break; - case SK_RLMT_PORT_ADDR: /* From ADDR. */ - SkRlmtEvtPortAddr(pAC, IoC, Para); - break; - - /* ----- RLMT events ----- */ - - case SK_RLMT_START: /* From DRV. */ - SkRlmtEvtStart(pAC, IoC, Para); - break; - case SK_RLMT_STOP: /* From DRV. */ - SkRlmtEvtStop(pAC, IoC, Para); - break; - case SK_RLMT_TIM: /* From RLMT via TIME. */ - SkRlmtEvtTim(pAC, IoC, Para); - break; - case SK_RLMT_SEG_TIM: - SkRlmtEvtSegTim(pAC, IoC, Para); - break; - case SK_RLMT_PACKET_RECEIVED: /* From DRV. */ - SkRlmtEvtPacketRx(pAC, IoC, Para); - break; - case SK_RLMT_STATS_CLEAR: /* From PNMI. */ - SkRlmtEvtStatsClear(pAC, IoC, Para); - break; - case SK_RLMT_STATS_UPDATE: /* From PNMI. */ - SkRlmtEvtStatsUpdate(pAC, IoC, Para); - break; - case SK_RLMT_PREFPORT_CHANGE: /* From PNMI. */ - SkRlmtEvtPrefportChange(pAC, IoC, Para); - break; - case SK_RLMT_MODE_CHANGE: /* From PNMI. */ - SkRlmtEvtModeChange(pAC, IoC, Para); - break; - case SK_RLMT_SET_NETS: /* From DRV. */ - SkRlmtEvtSetNets(pAC, IoC, Para); - break; - - /* ----- Unknown events ----- */ - - default: /* Create error log entry. */ - SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, - ("Unknown RLMT Event %d.\n", Event)) - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG); - break; - } /* switch() */ - - return (0); -} /* SkRlmtEvent */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c deleted file mode 100644 index 4e46295..0000000 --- a/drivers/net/sk98lin/sktimer.c +++ /dev/null @@ -1,250 +0,0 @@ -/****************************************************************************** - * - * Name: sktimer.c - * Project: Gigabit Ethernet Adapters, Event Scheduler Module - * Version: $Revision: 1.14 $ - * Date: $Date: 2003/09/16 13:46:51 $ - * Purpose: High level timer functions. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - - -/* - * Event queue and dispatcher - */ -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: sktimer.c,v 1.14 2003/09/16 13:46:51 rschmidt Exp $ (C) Marvell."; -#endif - -#include "h/skdrv1st.h" /* Driver Specific Definitions */ -#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ - -#ifdef __C2MAN__ -/* - Event queue management. - - General Description: - - */ -intro() -{} -#endif - - -/* Forward declaration */ -static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart); - - -/* - * Inits the software timer - * - * needs to be called during Init level 1. - */ -void SkTimerInit( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc, /* IoContext */ -int Level) /* Init Level */ -{ - switch (Level) { - case SK_INIT_DATA: - pAC->Tim.StQueue = NULL; - break; - case SK_INIT_IO: - SkHwtInit(pAC, Ioc); - SkTimerDone(pAC, Ioc); - break; - default: - break; - } -} - -/* - * Stops a high level timer - * - If a timer is not in the queue the function returns normally, too. - */ -void SkTimerStop( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc, /* IoContext */ -SK_TIMER *pTimer) /* Timer Pointer to be started */ -{ - SK_TIMER **ppTimPrev; - SK_TIMER *pTm; - - /* - * remove timer from queue - */ - pTimer->TmActive = SK_FALSE; - - if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) { - SkHwtStop(pAC, Ioc); - } - - for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); - ppTimPrev = &pTm->TmNext ) { - - if (pTm == pTimer) { - /* - * Timer found in queue - * - dequeue it and - * - correct delta of the next timer - */ - *ppTimPrev = pTm->TmNext; - - if (pTm->TmNext) { - /* correct delta of next timer in queue */ - pTm->TmNext->TmDelta += pTm->TmDelta; - } - return; - } - } -} - -/* - * Start a high level software timer - */ -void SkTimerStart( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc, /* IoContext */ -SK_TIMER *pTimer, /* Timer Pointer to be started */ -SK_U32 Time, /* Time value */ -SK_U32 Class, /* Event Class for this timer */ -SK_U32 Event, /* Event Value for this timer */ -SK_EVPARA Para) /* Event Parameter for this timer */ -{ - SK_TIMER **ppTimPrev; - SK_TIMER *pTm; - SK_U32 Delta; - - Time /= 16; /* input is uS, clock ticks are 16uS */ - - if (!Time) - Time = 1; - - SkTimerStop(pAC, Ioc, pTimer); - - pTimer->TmClass = Class; - pTimer->TmEvent = Event; - pTimer->TmPara = Para; - pTimer->TmActive = SK_TRUE; - - if (!pAC->Tim.StQueue) { - /* First Timer to be started */ - pAC->Tim.StQueue = pTimer; - pTimer->TmNext = NULL; - pTimer->TmDelta = Time; - - SkHwtStart(pAC, Ioc, Time); - - return; - } - - /* - * timer correction - */ - timer_done(pAC, Ioc, 0); - - /* - * find position in queue - */ - Delta = 0; - for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); - ppTimPrev = &pTm->TmNext ) { - - if (Delta + pTm->TmDelta > Time) { - /* Position found */ - /* Here the timer needs to be inserted. */ - break; - } - Delta += pTm->TmDelta; - } - - /* insert in queue */ - *ppTimPrev = pTimer; - pTimer->TmNext = pTm; - pTimer->TmDelta = Time - Delta; - - if (pTm) { - /* There is a next timer - * -> correct its Delta value. - */ - pTm->TmDelta -= pTimer->TmDelta; - } - - /* restart with first */ - SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); -} - - -void SkTimerDone( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc) /* IoContext */ -{ - timer_done(pAC, Ioc, 1); -} - - -static void timer_done( -SK_AC *pAC, /* Adapters context */ -SK_IOC Ioc, /* IoContext */ -int Restart) /* Do we need to restart the Hardware timer ? */ -{ - SK_U32 Delta; - SK_TIMER *pTm; - SK_TIMER *pTComp; /* Timer completed now now */ - SK_TIMER **ppLast; /* Next field of Last timer to be deq */ - int Done = 0; - - Delta = SkHwtRead(pAC, Ioc); - - ppLast = &pAC->Tim.StQueue; - pTm = pAC->Tim.StQueue; - while (pTm && !Done) { - if (Delta >= pTm->TmDelta) { - /* Timer ran out */ - pTm->TmActive = SK_FALSE; - Delta -= pTm->TmDelta; - ppLast = &pTm->TmNext; - pTm = pTm->TmNext; - } - else { - /* We found the first timer that did not run out */ - pTm->TmDelta -= Delta; - Delta = 0; - Done = 1; - } - } - *ppLast = NULL; - /* - * pTm points to the first Timer that did not run out. - * StQueue points to the first Timer that run out. - */ - - for ( pTComp = pAC->Tim.StQueue; pTComp; pTComp = pTComp->TmNext) { - SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent, pTComp->TmPara); - } - - /* Set head of timer queue to the first timer that did not run out */ - pAC->Tim.StQueue = pTm; - - if (Restart && pAC->Tim.StQueue) { - /* Restart HW timer */ - SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); - } -} - -/* End of file */ diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c deleted file mode 100644 index 1e662aa..0000000 --- a/drivers/net/sk98lin/skvpd.c +++ /dev/null @@ -1,1091 +0,0 @@ -/****************************************************************************** - * - * Name: skvpd.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.37 $ - * Date: $Date: 2003/01/13 10:42:45 $ - * Purpose: Shared software to read and write VPD data - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2003 SysKonnect GmbH. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -/* - Please refer skvpd.txt for information how to include this module - */ -static const char SysKonnectFileId[] = - "@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK"; - -#include "h/skdrv1st.h" -#include "h/sktypes.h" -#include "h/skdebug.h" -#include "h/skdrv2nd.h" - -/* - * Static functions - */ -#ifndef SK_KR_PROTO -static SK_VPD_PARA *vpd_find_para( - SK_AC *pAC, - const char *key, - SK_VPD_PARA *p); -#else /* SK_KR_PROTO */ -static SK_VPD_PARA *vpd_find_para(); -#endif /* SK_KR_PROTO */ - -/* - * waits for a completion of a VPD transfer - * The VPD transfer must complete within SK_TICKS_PER_SEC/16 - * - * returns 0: success, transfer completes - * error exit(9) with a error message - */ -static int VpdWait( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC, /* IO Context */ -int event) /* event to wait for (VPD_READ / VPD_write) completion*/ -{ - SK_U64 start_time; - SK_U16 state; - - SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD wait for %s\n", event?"Write":"Read")); - start_time = SkOsGetTime(pAC); - do { - if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) { - - /* Bug fix AF: Thu Mar 28 2002 - * Do not call: VPD_STOP(pAC, IoC); - * A pending VPD read cycle can not be aborted by writing - * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register). - * Although the write threshold in the OUR-register protects - * VPD read only space from being overwritten this does not - * protect a VPD read from being `converted` into a VPD write - * operation (on the fly). As a consequence the VPD_STOP would - * delete VPD read only data. In case of any problems with the - * I2C bus we exit the loop here. The I2C read operation can - * not be aborted except by a reset (->LR). - */ - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR, - ("ERROR:VPD wait timeout\n")); - return(1); - } - - VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state); - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("state = %x, event %x\n",state,event)); - } while((int)(state & PCI_VPD_FLAG) == event); - - return(0); -} - -#ifdef SKDIAG - -/* - * Read the dword at address 'addr' from the VPD EEPROM. - * - * Needed Time: MIN 1,3 ms MAX 2,6 ms - * - * Note: The DWord is returned in the endianess of the machine the routine - * is running on. - * - * Returns the data read. - */ -SK_U32 VpdReadDWord( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC, /* IO Context */ -int addr) /* VPD address */ -{ - SK_U32 Rtv; - - /* start VPD read */ - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD read dword at 0x%x\n",addr)); - addr &= ~VPD_WRITE; /* ensure the R/W bit is set to read */ - - VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr); - - /* ignore return code here */ - (void)VpdWait(pAC, IoC, VPD_READ); - - /* Don't swap here, it's a data stream of bytes */ - Rtv = 0; - - VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv); - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD read dword data = 0x%x\n",Rtv)); - return(Rtv); -} - -#endif /* SKDIAG */ - -/* - * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from - * or to the I2C EEPROM. - * - * Returns number of bytes read / written. - */ -static int VpdWriteStream( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC, /* IO Context */ -char *buf, /* data buffer */ -int Addr, /* VPD start address */ -int Len) /* number of bytes to read / to write */ -{ - int i; - int j; - SK_U16 AdrReg; - int Rtv; - SK_U8 * pComp; /* Compare pointer */ - SK_U8 Data; /* Input Data for Compare */ - - /* Init Compare Pointer */ - pComp = (SK_U8 *) buf; - - for (i = 0; i < Len; i++, buf++) { - if ((i%sizeof(SK_U32)) == 0) { - /* - * At the begin of each cycle read the Data Reg - * So it is initialized even if only a few bytes - * are written. - */ - AdrReg = (SK_U16) Addr; - AdrReg &= ~VPD_WRITE; /* READ operation */ - - VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); - - /* Wait for termination */ - Rtv = VpdWait(pAC, IoC, VPD_READ); - if (Rtv != 0) { - return(i); - } - } - - /* Write current Byte */ - VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), - *(SK_U8*)buf); - - if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) { - /* New Address needs to be written to VPD_ADDR reg */ - AdrReg = (SK_U16) Addr; - Addr += sizeof(SK_U32); - AdrReg |= VPD_WRITE; /* WRITE operation */ - - VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); - - /* Wait for termination */ - Rtv = VpdWait(pAC, IoC, VPD_WRITE); - if (Rtv != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("Write Timed Out\n")); - return(i - (i%sizeof(SK_U32))); - } - - /* - * Now re-read to verify - */ - AdrReg &= ~VPD_WRITE; /* READ operation */ - - VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); - - /* Wait for termination */ - Rtv = VpdWait(pAC, IoC, VPD_READ); - if (Rtv != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("Verify Timed Out\n")); - return(i - (i%sizeof(SK_U32))); - } - - for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) { - - VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data); - - if (Data != *pComp) { - /* Verify Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("WriteStream Verify Error\n")); - return(i - (i%sizeof(SK_U32)) + j); - } - } - } - } - - return(Len); -} - - -/* - * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from - * or to the I2C EEPROM. - * - * Returns number of bytes read / written. - */ -static int VpdReadStream( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC, /* IO Context */ -char *buf, /* data buffer */ -int Addr, /* VPD start address */ -int Len) /* number of bytes to read / to write */ -{ - int i; - SK_U16 AdrReg; - int Rtv; - - for (i = 0; i < Len; i++, buf++) { - if ((i%sizeof(SK_U32)) == 0) { - /* New Address needs to be written to VPD_ADDR reg */ - AdrReg = (SK_U16) Addr; - Addr += sizeof(SK_U32); - AdrReg &= ~VPD_WRITE; /* READ operation */ - - VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); - - /* Wait for termination */ - Rtv = VpdWait(pAC, IoC, VPD_READ); - if (Rtv != 0) { - return(i); - } - } - VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), - (SK_U8 *)buf); - } - - return(Len); -} - -/* - * Read ore writes 'len' bytes of VPD data, starting at 'addr' from - * or to the I2C EEPROM. - * - * Returns number of bytes read / written. - */ -static int VpdTransferBlock( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC, /* IO Context */ -char *buf, /* data buffer */ -int addr, /* VPD start address */ -int len, /* number of bytes to read / to write */ -int dir) /* transfer direction may be VPD_READ or VPD_WRITE */ -{ - int Rtv; /* Return value */ - int vpd_rom_size; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD %s block, addr = 0x%x, len = %d\n", - dir ? "write" : "read", addr, len)); - - if (len == 0) - return(0); - - vpd_rom_size = pAC->vpd.rom_size; - - if (addr > vpd_rom_size - 4) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Address error: 0x%x, exp. < 0x%x\n", - addr, vpd_rom_size - 4)); - return(0); - } - - if (addr + len > vpd_rom_size) { - len = vpd_rom_size - addr; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("Warning: len was cut to %d\n", len)); - } - - if (dir == VPD_READ) { - Rtv = VpdReadStream(pAC, IoC, buf, addr, len); - } - else { - Rtv = VpdWriteStream(pAC, IoC, buf, addr, len); - } - - return(Rtv); -} - -#ifdef SKDIAG - -/* - * Read 'len' bytes of VPD data, starting at 'addr'. - * - * Returns number of bytes read. - */ -int VpdReadBlock( -SK_AC *pAC, /* pAC pointer */ -SK_IOC IoC, /* IO Context */ -char *buf, /* buffer were the data should be stored */ -int addr, /* start reading at the VPD address */ -int len) /* number of bytes to read */ -{ - return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ)); -} - -/* - * Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'. - * - * Returns number of bytes writes. - */ -int VpdWriteBlock( -SK_AC *pAC, /* pAC pointer */ -SK_IOC IoC, /* IO Context */ -char *buf, /* buffer, holds the data to write */ -int addr, /* start writing at the VPD address */ -int len) /* number of bytes to write */ -{ - return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE)); -} -#endif /* SKDIAG */ - -/* - * (re)initialize the VPD buffer - * - * Reads the VPD data from the EEPROM into the VPD buffer. - * Get the remaining read only and read / write space. - * - * return 0: success - * 1: fatal VPD error - */ -static int VpdInit( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC) /* IO Context */ -{ - SK_VPD_PARA *r, rp; /* RW or RV */ - int i; - unsigned char x; - int vpd_size; - SK_U16 dev_id; - SK_U32 our_reg2; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. ")); - - VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id); - - VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2); - - pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14); - - /* - * this function might get used before the hardware is initialized - * therefore we cannot always trust in GIChipId - */ - if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 && - dev_id != VPD_DEV_ID_GENESIS) || - ((pAC->vpd.v.vpd_status & VPD_VALID) != 0 && - !pAC->GIni.GIGenesis)) { - - /* for Yukon the VPD size is always 256 */ - vpd_size = VPD_SIZE_YUKON; - } - else { - /* Genesis uses the maximum ROM size up to 512 for VPD */ - if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) { - vpd_size = VPD_SIZE_GENESIS; - } - else { - vpd_size = pAC->vpd.rom_size; - } - } - - /* read the VPD data into the VPD buffer */ - if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ) - != vpd_size) { - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("Block Read Error\n")); - return(1); - } - - pAC->vpd.vpd_size = vpd_size; - - /* Asus K8V Se Deluxe bugfix. Correct VPD content */ - /* MBo April 2004 */ - if (((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) && - ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) && - ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45)) { - printk("sk98lin: Asus mainboard with buggy VPD? " - "Correcting data.\n"); - pAC->vpd.vpd_buf[0x40] = 0x38; - } - - - /* find the end tag of the RO area */ - if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Encoding Error: RV Tag not found\n")); - return(1); - } - - if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) { - SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Encoding Error: Invalid VPD struct size\n")); - return(1); - } - pAC->vpd.v.vpd_free_ro = r->p_len - 1; - - /* test the checksum */ - for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) { - x += pAC->vpd.vpd_buf[i]; - } - - if (x != 0) { - /* checksum error */ - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("VPD Checksum Error\n")); - return(1); - } - - /* find and check the end tag of the RW area */ - if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Encoding Error: RV Tag not found\n")); - return(1); - } - - if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Encoding Error: Invalid VPD struct size\n")); - return(1); - } - pAC->vpd.v.vpd_free_rw = r->p_len; - - /* everything seems to be ok */ - if (pAC->GIni.GIChipId != 0) { - pAC->vpd.v.vpd_status |= VPD_VALID; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, - ("done. Free RO = %d, Free RW = %d\n", - pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); - - return(0); -} - -/* - * find the Keyword 'key' in the VPD buffer and fills the - * parameter struct 'p' with it's values - * - * returns *p success - * 0: parameter was not found or VPD encoding error - */ -static SK_VPD_PARA *vpd_find_para( -SK_AC *pAC, /* common data base */ -const char *key, /* keyword to find (e.g. "MN") */ -SK_VPD_PARA *p) /* parameter description struct */ -{ - char *v ; /* points to VPD buffer */ - int max; /* Maximum Number of Iterations */ - - v = pAC->vpd.vpd_buf; - max = 128; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD find para %s .. ",key)); - - /* check mandatory resource type ID string (Product Name) */ - if (*v != (char)RES_ID) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Error: 0x%x missing\n", RES_ID)); - return NULL; - } - - if (strcmp(key, VPD_NAME) == 0) { - p->p_len = VPD_GET_RES_LEN(v); - p->p_val = VPD_GET_VAL(v); - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("found, len = %d\n", p->p_len)); - return(p); - } - - v += 3 + VPD_GET_RES_LEN(v) + 3; - for (;; ) { - if (SK_MEMCMP(key,v,2) == 0) { - p->p_len = VPD_GET_VPD_LEN(v); - p->p_val = VPD_GET_VAL(v); - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("found, len = %d\n",p->p_len)); - return(p); - } - - /* exit when reaching the "RW" Tag or the maximum of itera. */ - max--; - if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) { - break; - } - - if (SK_MEMCMP(VPD_RV,v,2) == 0) { - v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ - } - else { - v += 3 + VPD_GET_VPD_LEN(v); - } - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("scanning '%c%c' len = %d\n",v[0],v[1],v[2])); - } - -#ifdef DEBUG - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n")); - if (max == 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Key/Len Encoding error\n")); - } -#endif /* DEBUG */ - return NULL; -} - -/* - * Move 'n' bytes. Begin with the last byte if 'n' is > 0, - * Start with the last byte if n is < 0. - * - * returns nothing - */ -static void vpd_move_para( -char *start, /* start of memory block */ -char *end, /* end of memory block to move */ -int n) /* number of bytes the memory block has to be moved */ -{ - char *p; - int i; /* number of byte copied */ - - if (n == 0) - return; - - i = (int) (end - start + 1); - if (n < 0) { - p = start + n; - while (i != 0) { - *p++ = *start++; - i--; - } - } - else { - p = end + n; - while (i != 0) { - *p-- = *end--; - i--; - } - } -} - -/* - * setup the VPD keyword 'key' at 'ip'. - * - * returns nothing - */ -static void vpd_insert_key( -const char *key, /* keyword to insert */ -const char *buf, /* buffer with the keyword value */ -int len, /* length of the value string */ -char *ip) /* inseration point */ -{ - SK_VPD_KEY *p; - - p = (SK_VPD_KEY *) ip; - p->p_key[0] = key[0]; - p->p_key[1] = key[1]; - p->p_len = (unsigned char) len; - SK_MEMCPY(&p->p_val,buf,len); -} - -/* - * Setup the VPD end tag "RV" / "RW". - * Also correct the remaining space variables vpd_free_ro / vpd_free_rw. - * - * returns 0: success - * 1: encoding error - */ -static int vpd_mod_endtag( -SK_AC *pAC, /* common data base */ -char *etp) /* end pointer input position */ -{ - SK_VPD_KEY *p; - unsigned char x; - int i; - int vpd_size; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1])); - - vpd_size = pAC->vpd.vpd_size; - - p = (SK_VPD_KEY *) etp; - - if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) { - /* something wrong here, encoding error */ - SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, - ("Encoding Error: invalid end tag\n")); - return(1); - } - if (etp > pAC->vpd.vpd_buf + vpd_size/2) { - /* create "RW" tag */ - p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1); - pAC->vpd.v.vpd_free_rw = (int) p->p_len; - i = pAC->vpd.v.vpd_free_rw; - etp += 3; - } - else { - /* create "RV" tag */ - p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3); - pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1; - - /* setup checksum */ - for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) { - x += pAC->vpd.vpd_buf[i]; - } - p->p_val = (char) 0 - x; - i = pAC->vpd.v.vpd_free_ro; - etp += 4; - } - while (i) { - *etp++ = 0x00; - i--; - } - - return(0); -} - -/* - * Insert a VPD keyword into the VPD buffer. - * - * The keyword 'key' is inserted at the position 'ip' in the - * VPD buffer. - * The keywords behind the input position will - * be moved. The VPD end tag "RV" or "RW" is generated again. - * - * returns 0: success - * 2: value string was cut - * 4: VPD full, keyword was not written - * 6: fatal VPD error - * - */ -static int VpdSetupPara( -SK_AC *pAC, /* common data base */ -const char *key, /* keyword to insert */ -const char *buf, /* buffer with the keyword value */ -int len, /* length of the keyword value */ -int type, /* VPD_RO_KEY or VPD_RW_KEY */ -int op) /* operation to do: ADD_KEY or OWR_KEY */ -{ - SK_VPD_PARA vp; - char *etp; /* end tag position */ - int free; /* remaining space in selected area */ - char *ip; /* input position inside the VPD buffer */ - int rtv; /* return code */ - int head; /* additional haeder bytes to move */ - int found; /* additinoal bytes if the keyword was found */ - int vpd_size; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("VPD setup para key = %s, val = %s\n",key,buf)); - - vpd_size = pAC->vpd.vpd_size; - - rtv = 0; - ip = NULL; - if (type == VPD_RW_KEY) { - /* end tag is "RW" */ - free = pAC->vpd.v.vpd_free_rw; - etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3); - } - else { - /* end tag is "RV" */ - free = pAC->vpd.v.vpd_free_ro; - etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4); - } - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("Free RO = %d, Free RW = %d\n", - pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); - - head = 0; - found = 0; - if (op == OWR_KEY) { - if (vpd_find_para(pAC, key, &vp)) { - found = 3; - ip = vp.p_val - 3; - free += vp.p_len + 3; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("Overwrite Key\n")); - } - else { - op = ADD_KEY; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, - ("Add Key\n")); - } - } - if (op == ADD_KEY) { - ip = etp; - vp.p_len = 0; - head = 3; - } - - if (len + 3 > free) { - if (free < 7) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD Buffer Overflow, keyword not written\n")); - return(4); - } - /* cut it again */ - len = free - 3; - rtv = 2; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD Buffer Full, Keyword was cut\n")); - } - - vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head); - vpd_insert_key(key, buf, len, ip); - if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) { - pAC->vpd.v.vpd_status &= ~VPD_VALID; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD Encoding Error\n")); - return(6); - } - - return(rtv); -} - - -/* - * Read the contents of the VPD EEPROM and copy it to the - * VPD buffer if not already done. - * - * return: A pointer to the vpd_status structure. The structure contains - * this fields. - */ -SK_VPD_STATUS *VpdStat( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC) /* IO Context */ -{ - if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { - (void)VpdInit(pAC, IoC); - } - return(&pAC->vpd.v); -} - - -/* - * Read the contents of the VPD EEPROM and copy it to the VPD - * buffer if not already done. - * Scan the VPD buffer for VPD keywords and create the VPD - * keyword list by copying the keywords to 'buf', all after - * each other and terminated with a '\0'. - * - * Exceptions: o The Resource Type ID String (product name) is called "Name" - * o The VPD end tags 'RV' and 'RW' are not listed - * - * The number of copied keywords is counted in 'elements'. - * - * returns 0: success - * 2: buffer overfull, one or more keywords are missing - * 6: fatal VPD error - * - * example values after returning: - * - * buf = "Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0" - * *len = 30 - * *elements = 9 - */ -int VpdKeys( -SK_AC *pAC, /* common data base */ -SK_IOC IoC, /* IO Context */ -char *buf, /* buffer where to copy the keywords */ -int *len, /* buffer length */ -int *elements) /* number of keywords returned */ -{ - char *v; - int n; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. ")); - *elements = 0; - if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { - if (VpdInit(pAC, IoC) != 0) { - *len = 0; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD Init Error, terminated\n")); - return(6); - } - } - - if ((signed)strlen(VPD_NAME) + 1 <= *len) { - v = pAC->vpd.vpd_buf; - strcpy(buf,VPD_NAME); - n = strlen(VPD_NAME) + 1; - buf += n; - *elements = 1; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, - ("'%c%c' ",v[0],v[1])); - } - else { - *len = 0; - SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR, - ("buffer overflow\n")); - return(2); - } - - v += 3 + VPD_GET_RES_LEN(v) + 3; - for (;; ) { - /* exit when reaching the "RW" Tag */ - if (SK_MEMCMP(VPD_RW,v,2) == 0) { - break; - } - - if (SK_MEMCMP(VPD_RV,v,2) == 0) { - v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ - continue; - } - - if (n+3 <= *len) { - SK_MEMCPY(buf,v,2); - buf += 2; - *buf++ = '\0'; - n += 3; - v += 3 + VPD_GET_VPD_LEN(v); - *elements += 1; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, - ("'%c%c' ",v[0],v[1])); - } - else { - *len = n; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("buffer overflow\n")); - return(2); - } - } - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n")); - *len = n; - return(0); -} - - -/* - * Read the contents of the VPD EEPROM and copy it to the - * VPD buffer if not already done. Search for the VPD keyword - * 'key' and copy its value to 'buf'. Add a terminating '\0'. - * If the value does not fit into the buffer cut it after - * 'len' - 1 bytes. - * - * returns 0: success - * 1: keyword not found - * 2: value string was cut - * 3: VPD transfer timeout - * 6: fatal VPD error - */ -int VpdRead( -SK_AC *pAC, /* common data base */ -SK_IOC IoC, /* IO Context */ -const char *key, /* keyword to read (e.g. "MN") */ -char *buf, /* buffer where to copy the keyword value */ -int *len) /* buffer length */ -{ - SK_VPD_PARA *p, vp; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key)); - if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { - if (VpdInit(pAC, IoC) != 0) { - *len = 0; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD init error\n")); - return(6); - } - } - - if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { - if (p->p_len > (*(unsigned *)len)-1) { - p->p_len = *len - 1; - } - SK_MEMCPY(buf, p->p_val, p->p_len); - buf[p->p_len] = '\0'; - *len = p->p_len; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, - ("%c%c%c%c.., len = %d\n", - buf[0],buf[1],buf[2],buf[3],*len)); - } - else { - *len = 0; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n")); - return(1); - } - return(0); -} - - -/* - * Check whether a given key may be written - * - * returns - * SK_TRUE Yes it may be written - * SK_FALSE No it may be written - */ -SK_BOOL VpdMayWrite( -char *key) /* keyword to write (allowed values "Yx", "Vx") */ -{ - if ((*key != 'Y' && *key != 'V') || - key[1] < '0' || key[1] > 'Z' || - (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { - - return(SK_FALSE); - } - return(SK_TRUE); -} - -/* - * Read the contents of the VPD EEPROM and copy it to the VPD - * buffer if not already done. Insert/overwrite the keyword 'key' - * in the VPD buffer. Cut the keyword value if it does not fit - * into the VPD read / write area. - * - * returns 0: success - * 2: value string was cut - * 3: VPD transfer timeout - * 4: VPD full, keyword was not written - * 5: keyword cannot be written - * 6: fatal VPD error - */ -int VpdWrite( -SK_AC *pAC, /* common data base */ -SK_IOC IoC, /* IO Context */ -const char *key, /* keyword to write (allowed values "Yx", "Vx") */ -const char *buf) /* buffer where the keyword value can be read from */ -{ - int len; /* length of the keyword to write */ - int rtv; /* return code */ - int rtv2; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, - ("VPD write %s = %s\n",key,buf)); - - if ((*key != 'Y' && *key != 'V') || - key[1] < '0' || key[1] > 'Z' || - (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("illegal key tag, keyword not written\n")); - return(5); - } - - if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { - if (VpdInit(pAC, IoC) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD init error\n")); - return(6); - } - } - - rtv = 0; - len = strlen(buf); - if (len > VPD_MAX_LEN) { - /* cut it */ - len = VPD_MAX_LEN; - rtv = 2; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("keyword too long, cut after %d bytes\n",VPD_MAX_LEN)); - } - if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD write error\n")); - return(rtv2); - } - - return(rtv); -} - -/* - * Read the contents of the VPD EEPROM and copy it to the - * VPD buffer if not already done. Remove the VPD keyword - * 'key' from the VPD buffer. - * Only the keywords in the read/write area can be deleted. - * Keywords in the read only area cannot be deleted. - * - * returns 0: success, keyword was removed - * 1: keyword not found - * 5: keyword cannot be deleted - * 6: fatal VPD error - */ -int VpdDelete( -SK_AC *pAC, /* common data base */ -SK_IOC IoC, /* IO Context */ -char *key) /* keyword to read (e.g. "MN") */ -{ - SK_VPD_PARA *p, vp; - char *etp; - int vpd_size; - - vpd_size = pAC->vpd.vpd_size; - - SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key)); - if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { - if (VpdInit(pAC, IoC) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD init error\n")); - return(6); - } - } - - if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { - if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) { - /* try to delete read only keyword */ - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("cannot delete RO keyword\n")); - return(5); - } - - etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3); - - vpd_move_para(vp.p_val+vp.p_len, etp+2, - - ((int)(vp.p_len + 3))); - if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) { - pAC->vpd.v.vpd_status &= ~VPD_VALID; - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("VPD encoding error\n")); - return(6); - } - } - else { - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("keyword not found\n")); - return(1); - } - - return(0); -} - -/* - * If the VPD buffer contains valid data write the VPD - * read/write area back to the VPD EEPROM. - * - * returns 0: success - * 3: VPD transfer timeout - */ -int VpdUpdate( -SK_AC *pAC, /* Adapters context */ -SK_IOC IoC) /* IO Context */ -{ - int vpd_size; - - vpd_size = pAC->vpd.vpd_size; - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. ")); - if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) { - if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2, - vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) { - - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, - ("transfer timed out\n")); - return(3); - } - } - SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n")); - return(0); -} - diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c deleted file mode 100644 index b4e7502..0000000 --- a/drivers/net/sk98lin/skxmac2.c +++ /dev/null @@ -1,4160 +0,0 @@ -/****************************************************************************** - * - * Name: skxmac2.c - * Project: Gigabit Ethernet Adapters, Common Modules - * Version: $Revision: 1.102 $ - * Date: $Date: 2003/10/02 16:53:58 $ - * Purpose: Contains functions to initialize the MACs and PHYs - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" - -/* typedefs *******************************************************************/ - -/* BCOM PHY magic pattern list */ -typedef struct s_PhyHack { - int PhyReg; /* Phy register */ - SK_U16 PhyVal; /* Value to write */ -} BCOM_HACK; - -/* local variables ************************************************************/ - -#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) -static const char SysKonnectFileId[] = - "@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell."; -#endif - -#ifdef GENESIS -static BCOM_HACK BcomRegA1Hack[] = { - { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, - { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, - { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, - { 0, 0 } -}; -static BCOM_HACK BcomRegC0Hack[] = { - { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 }, - { 0x15, 0x0A04 }, { 0x18, 0x0420 }, - { 0, 0 } -}; -#endif - -/* function prototypes ********************************************************/ -#ifdef GENESIS -static void SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL); -static void SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL); -static int SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int); -static int SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int); -#endif /* GENESIS */ -#ifdef YUKON -static void SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL); -static int SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int); -#endif /* YUKON */ -#ifdef OTHER_PHY -static void SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL); -static void SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL); -static int SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int); -static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int); -#endif /* OTHER_PHY */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmPhyRead() - Read from XMAC PHY register - * - * Description: reads a 16-bit word from XMAC PHY or ext. PHY - * - * Returns: - * nothing - */ -void SkXmPhyRead( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 SK_FAR *pVal) /* Pointer to Value */ -{ - SK_U16 Mmu; - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - /* write the PHY register's address */ - XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); - - /* get the PHY register's value */ - XM_IN16(IoC, Port, XM_PHY_DATA, pVal); - - if (pPrt->PhyType != SK_PHY_XMAC) { - do { - XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); - /* wait until 'Ready' is set */ - } while ((Mmu & XM_MMU_PHY_RDY) == 0); - - /* get the PHY register's value */ - XM_IN16(IoC, Port, XM_PHY_DATA, pVal); - } -} /* SkXmPhyRead */ - - -/****************************************************************************** - * - * SkXmPhyWrite() - Write to XMAC PHY register - * - * Description: writes a 16-bit word to XMAC PHY or ext. PHY - * - * Returns: - * nothing - */ -void SkXmPhyWrite( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 Val) /* Value */ -{ - SK_U16 Mmu; - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PhyType != SK_PHY_XMAC) { - do { - XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); - /* wait until 'Busy' is cleared */ - } while ((Mmu & XM_MMU_PHY_BUSY) != 0); - } - - /* write the PHY register's address */ - XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); - - /* write the PHY register's value */ - XM_OUT16(IoC, Port, XM_PHY_DATA, Val); - - if (pPrt->PhyType != SK_PHY_XMAC) { - do { - XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); - /* wait until 'Busy' is cleared */ - } while ((Mmu & XM_MMU_PHY_BUSY) != 0); - } -} /* SkXmPhyWrite */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmPhyRead() - Read from GPHY register - * - * Description: reads a 16-bit word from GPHY through MDIO - * - * Returns: - * nothing - */ -void SkGmPhyRead( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 SK_FAR *pVal) /* Pointer to Value */ -{ - SK_U16 Ctrl; - SK_GEPORT *pPrt; -#ifdef VCPU - u_long SimCyle; - u_long SimLowTime; - - VCPUgetTime(&SimCyle, &SimLowTime); - VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n", - PhyReg, SimCyle, SimLowTime); -#endif /* VCPU */ - - pPrt = &pAC->GIni.GP[Port]; - - /* set PHY-Register offset and 'Read' OpCode (= 1) */ - *pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | - GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD); - - GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal); - - GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - - /* additional check for MDC/MDIO activity */ - if ((Ctrl & GM_SMI_CT_BUSY) == 0) { - *pVal = 0; - return; - } - - *pVal |= GM_SMI_CT_BUSY; - - do { -#ifdef VCPU - VCPUwaitTime(1000); -#endif /* VCPU */ - - GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - - /* wait until 'ReadValid' is set */ - } while (Ctrl == *pVal); - - /* get the PHY register's value */ - GM_IN16(IoC, Port, GM_SMI_DATA, pVal); - -#ifdef VCPU - VCPUgetTime(&SimCyle, &SimLowTime); - VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", - SimCyle, SimLowTime); -#endif /* VCPU */ - -} /* SkGmPhyRead */ - - -/****************************************************************************** - * - * SkGmPhyWrite() - Write to GPHY register - * - * Description: writes a 16-bit word to GPHY through MDIO - * - * Returns: - * nothing - */ -void SkGmPhyWrite( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 Val) /* Value */ -{ - SK_U16 Ctrl; - SK_GEPORT *pPrt; -#ifdef VCPU - SK_U32 DWord; - u_long SimCyle; - u_long SimLowTime; - - VCPUgetTime(&SimCyle, &SimLowTime); - VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n", - PhyReg, Val, SimCyle, SimLowTime); -#endif /* VCPU */ - - pPrt = &pAC->GIni.GP[Port]; - - /* write the PHY register's value */ - GM_OUT16(IoC, Port, GM_SMI_DATA, Val); - - /* set PHY-Register offset and 'Write' OpCode (= 0) */ - Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg); - - GM_OUT16(IoC, Port, GM_SMI_CTRL, Val); - - GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - - /* additional check for MDC/MDIO activity */ - if ((Ctrl & GM_SMI_CT_BUSY) == 0) { - return; - } - - Val |= GM_SMI_CT_BUSY; - - do { -#ifdef VCPU - /* read Timer value */ - SK_IN32(IoC, B2_TI_VAL, &DWord); - - VCPUwaitTime(1000); -#endif /* VCPU */ - - GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - - /* wait until 'Busy' is cleared */ - } while (Ctrl == Val); - -#ifdef VCPU - VCPUgetTime(&SimCyle, &SimLowTime); - VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", - SimCyle, SimLowTime); -#endif /* VCPU */ - -} /* SkGmPhyWrite */ -#endif /* YUKON */ - - -#ifdef SK_DIAG -/****************************************************************************** - * - * SkGePhyRead() - Read from PHY register - * - * Description: calls a read PHY routine dep. on board type - * - * Returns: - * nothing - */ -void SkGePhyRead( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 *pVal) /* Pointer to Value */ -{ - void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal); - - if (pAC->GIni.GIGenesis) { - r_func = SkXmPhyRead; - } - else { - r_func = SkGmPhyRead; - } - - r_func(pAC, IoC, Port, PhyReg, pVal); -} /* SkGePhyRead */ - - -/****************************************************************************** - * - * SkGePhyWrite() - Write to PHY register - * - * Description: calls a write PHY routine dep. on board type - * - * Returns: - * nothing - */ -void SkGePhyWrite( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* I/O Context */ -int Port, /* Port Index (MAC_1 + n) */ -int PhyReg, /* Register Address (Offset) */ -SK_U16 Val) /* Value */ -{ - void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val); - - if (pAC->GIni.GIGenesis) { - w_func = SkXmPhyWrite; - } - else { - w_func = SkGmPhyWrite; - } - - w_func(pAC, IoC, Port, PhyReg, Val); -} /* SkGePhyWrite */ -#endif /* SK_DIAG */ - - -/****************************************************************************** - * - * SkMacPromiscMode() - Enable / Disable Promiscuous Mode - * - * Description: - * enables / disables promiscuous mode by setting Mode Register (XMAC) or - * Receive Control Register (GMAC) dep. on board type - * - * Returns: - * nothing - */ -void SkMacPromiscMode( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL Enable) /* Enable / Disable */ -{ -#ifdef YUKON - SK_U16 RcReg; -#endif -#ifdef GENESIS - SK_U32 MdReg; -#endif - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - /* enable or disable promiscuous mode */ - if (Enable) { - MdReg |= XM_MD_ENA_PROM; - } - else { - MdReg &= ~XM_MD_ENA_PROM; - } - /* setup Mode Register */ - XM_OUT32(IoC, Port, XM_MODE, MdReg); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); - - /* enable or disable unicast and multicast filtering */ - if (Enable) { - RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); - } - else { - RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); - } - /* setup Receive Control Register */ - GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); - } -#endif /* YUKON */ - -} /* SkMacPromiscMode*/ - - -/****************************************************************************** - * - * SkMacHashing() - Enable / Disable Hashing - * - * Description: - * enables / disables hashing by setting Mode Register (XMAC) or - * Receive Control Register (GMAC) dep. on board type - * - * Returns: - * nothing - */ -void SkMacHashing( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL Enable) /* Enable / Disable */ -{ -#ifdef YUKON - SK_U16 RcReg; -#endif -#ifdef GENESIS - SK_U32 MdReg; -#endif - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - /* enable or disable hashing */ - if (Enable) { - MdReg |= XM_MD_ENA_HASH; - } - else { - MdReg &= ~XM_MD_ENA_HASH; - } - /* setup Mode Register */ - XM_OUT32(IoC, Port, XM_MODE, MdReg); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); - - /* enable or disable multicast filtering */ - if (Enable) { - RcReg |= GM_RXCR_MCF_ENA; - } - else { - RcReg &= ~GM_RXCR_MCF_ENA; - } - /* setup Receive Control Register */ - GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); - } -#endif /* YUKON */ - -} /* SkMacHashing*/ - - -#ifdef SK_DIAG -/****************************************************************************** - * - * SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register - * - * Description: - * The features - * - FCS stripping, SK_STRIP_FCS_ON/OFF - * - pad byte stripping, SK_STRIP_PAD_ON/OFF - * - don't set XMR_FS_ERR in status SK_LENERR_OK_ON/OFF - * for inrange length error frames - * - don't set XMR_FS_ERR in status SK_BIG_PK_OK_ON/OFF - * for frames > 1514 bytes - * - enable Rx of own packets SK_SELF_RX_ON/OFF - * - * for incoming packets may be enabled/disabled by this function. - * Additional modes may be added later. - * Multiple modes can be enabled/disabled at the same time. - * The new configuration is written to the Rx Command register immediately. - * - * Returns: - * nothing - */ -static void SkXmSetRxCmd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, - SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ -{ - SK_U16 OldRxCmd; - SK_U16 RxCmd; - - XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd); - - RxCmd = OldRxCmd; - - switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) { - case SK_STRIP_FCS_ON: - RxCmd |= XM_RX_STRIP_FCS; - break; - case SK_STRIP_FCS_OFF: - RxCmd &= ~XM_RX_STRIP_FCS; - break; - } - - switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) { - case SK_STRIP_PAD_ON: - RxCmd |= XM_RX_STRIP_PAD; - break; - case SK_STRIP_PAD_OFF: - RxCmd &= ~XM_RX_STRIP_PAD; - break; - } - - switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) { - case SK_LENERR_OK_ON: - RxCmd |= XM_RX_LENERR_OK; - break; - case SK_LENERR_OK_OFF: - RxCmd &= ~XM_RX_LENERR_OK; - break; - } - - switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) { - case SK_BIG_PK_OK_ON: - RxCmd |= XM_RX_BIG_PK_OK; - break; - case SK_BIG_PK_OK_OFF: - RxCmd &= ~XM_RX_BIG_PK_OK; - break; - } - - switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) { - case SK_SELF_RX_ON: - RxCmd |= XM_RX_SELF_RX; - break; - case SK_SELF_RX_OFF: - RxCmd &= ~XM_RX_SELF_RX; - break; - } - - /* Write the new mode to the Rx command register if required */ - if (OldRxCmd != RxCmd) { - XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd); - } -} /* SkXmSetRxCmd */ - - -/****************************************************************************** - * - * SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register - * - * Description: - * The features - * - FCS (CRC) stripping, SK_STRIP_FCS_ON/OFF - * - don't set GMR_FS_LONG_ERR SK_BIG_PK_OK_ON/OFF - * for frames > 1514 bytes - * - enable Rx of own packets SK_SELF_RX_ON/OFF - * - * for incoming packets may be enabled/disabled by this function. - * Additional modes may be added later. - * Multiple modes can be enabled/disabled at the same time. - * The new configuration is written to the Rx Command register immediately. - * - * Returns: - * nothing - */ -static void SkGmSetRxCmd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, - SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ -{ - SK_U16 OldRxCmd; - SK_U16 RxCmd; - - if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) { - - GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd); - - RxCmd = OldRxCmd; - - if ((Mode & SK_STRIP_FCS_ON) != 0) { - RxCmd |= GM_RXCR_CRC_DIS; - } - else { - RxCmd &= ~GM_RXCR_CRC_DIS; - } - /* Write the new mode to the Rx control register if required */ - if (OldRxCmd != RxCmd) { - GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd); - } - } - - if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) { - - GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd); - - RxCmd = OldRxCmd; - - if ((Mode & SK_BIG_PK_OK_ON) != 0) { - RxCmd |= GM_SMOD_JUMBO_ENA; - } - else { - RxCmd &= ~GM_SMOD_JUMBO_ENA; - } - /* Write the new mode to the Rx control register if required */ - if (OldRxCmd != RxCmd) { - GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd); - } - } -} /* SkGmSetRxCmd */ - - -/****************************************************************************** - * - * SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register - * - * Description: modifies the MAC's Rx Control reg. dep. on board type - * - * Returns: - * nothing - */ -void SkMacSetRxCmd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -int Mode) /* Rx Mode */ -{ - if (pAC->GIni.GIGenesis) { - - SkXmSetRxCmd(pAC, IoC, Port, Mode); - } - else { - - SkGmSetRxCmd(pAC, IoC, Port, Mode); - } - -} /* SkMacSetRxCmd */ - - -/****************************************************************************** - * - * SkMacCrcGener() - Enable / Disable CRC Generation - * - * Description: enables / disables CRC generation dep. on board type - * - * Returns: - * nothing - */ -void SkMacCrcGener( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL Enable) /* Enable / Disable */ -{ - SK_U16 Word; - - if (pAC->GIni.GIGenesis) { - - XM_IN16(IoC, Port, XM_TX_CMD, &Word); - - if (Enable) { - Word &= ~XM_TX_NO_CRC; - } - else { - Word |= XM_TX_NO_CRC; - } - /* setup Tx Command Register */ - XM_OUT16(IoC, Port, XM_TX_CMD, Word); - } - else { - - GM_IN16(IoC, Port, GM_TX_CTRL, &Word); - - if (Enable) { - Word &= ~GM_TXCR_CRC_DIS; - } - else { - Word |= GM_TXCR_CRC_DIS; - } - /* setup Tx Control Register */ - GM_OUT16(IoC, Port, GM_TX_CTRL, Word); - } - -} /* SkMacCrcGener*/ - -#endif /* SK_DIAG */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmClrExactAddr() - Clear Exact Match Address Registers - * - * Description: - * All Exact Match Address registers of the XMAC 'Port' will be - * cleared starting with 'StartNum' up to (and including) the - * Exact Match address number of 'StopNum'. - * - * Returns: - * nothing - */ -void SkXmClrExactAddr( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -int StartNum, /* Begin with this Address Register Index (0..15) */ -int StopNum) /* Stop after finished with this Register Idx (0..15) */ -{ - int i; - SK_U16 ZeroAddr[3] = {0x0000, 0x0000, 0x0000}; - - if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 || - StartNum > StopNum) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG); - return; - } - - for (i = StartNum; i <= StopNum; i++) { - XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]); - } -} /* SkXmClrExactAddr */ -#endif /* GENESIS */ - - -/****************************************************************************** - * - * SkMacFlushTxFifo() - Flush the MAC's transmit FIFO - * - * Description: - * Flush the transmit FIFO of the MAC specified by the index 'Port' - * - * Returns: - * nothing - */ -void SkMacFlushTxFifo( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ -#ifdef GENESIS - SK_U32 MdReg; - - if (pAC->GIni.GIGenesis) { - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - - XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* no way to flush the FIFO we have to issue a reset */ - /* TBD */ - } -#endif /* YUKON */ - -} /* SkMacFlushTxFifo */ - - -/****************************************************************************** - * - * SkMacFlushRxFifo() - Flush the MAC's receive FIFO - * - * Description: - * Flush the receive FIFO of the MAC specified by the index 'Port' - * - * Returns: - * nothing - */ -static void SkMacFlushRxFifo( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ -#ifdef GENESIS - SK_U32 MdReg; - - if (pAC->GIni.GIGenesis) { - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - - XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* no way to flush the FIFO we have to issue a reset */ - /* TBD */ - } -#endif /* YUKON */ - -} /* SkMacFlushRxFifo */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmSoftRst() - Do a XMAC software reset - * - * Description: - * The PHY registers should not be destroyed during this - * kind of software reset. Therefore the XMAC Software Reset - * (XM_GP_RES_MAC bit in XM_GP_PORT) must not be used! - * - * The software reset is done by - * - disabling the Rx and Tx state machine, - * - resetting the statistics module, - * - clear all other significant XMAC Mode, - * Command, and Control Registers - * - clearing the Hash Register and the - * Exact Match Address registers, and - * - flushing the XMAC's Rx and Tx FIFOs. - * - * Note: - * Another requirement when stopping the XMAC is to - * avoid sending corrupted frames on the network. - * Disabling the Tx state machine will NOT interrupt - * the currently transmitted frame. But we must take care - * that the Tx FIFO is cleared AFTER the current frame - * is complete sent to the network. - * - * It takes about 12ns to send a frame with 1538 bytes. - * One PCI clock goes at least 15ns (66MHz). Therefore - * after reading XM_GP_PORT back, we are sure that the - * transmitter is disabled AND idle. And this means - * we may flush the transmit FIFO now. - * - * Returns: - * nothing - */ -static void SkXmSoftRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000}; - - /* reset the statistics module */ - XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT); - - /* disable all XMAC IRQs */ - XM_OUT16(IoC, Port, XM_IMSK, 0xffff); - - XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */ - - XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */ - XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */ - - /* disable all PHY IRQs */ - switch (pAC->GIni.GP[Port].PhyType) { - case SK_PHY_BCOM: - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); - break; - case SK_PHY_NAT: - /* todo: National - SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ - break; -#endif /* OTHER_PHY */ - } - - /* clear the Hash Register */ - XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr); - - /* clear the Exact Match Address registers */ - SkXmClrExactAddr(pAC, IoC, Port, 0, 15); - - /* clear the Source Check Address registers */ - XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr); - -} /* SkXmSoftRst */ - - -/****************************************************************************** - * - * SkXmHardRst() - Do a XMAC hardware reset - * - * Description: - * The XMAC of the specified 'Port' and all connected devices - * (PHY and SERDES) will receive a reset signal on its *Reset pins. - * External PHYs must be reset by clearing a bit in the GPIO register - * (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns). - * - * ATTENTION: - * It is absolutely necessary to reset the SW_RST Bit first - * before calling this function. - * - * Returns: - * nothing - */ -static void SkXmHardRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U32 Reg; - int i; - int TOut; - SK_U16 Word; - - for (i = 0; i < 4; i++) { - /* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */ - SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); - - TOut = 0; - do { - if (TOut++ > 10000) { - /* - * Adapter seems to be in RESET state. - * Registers cannot be written. - */ - return; - } - - SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST); - - SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word); - - } while ((Word & MFF_SET_MAC_RST) == 0); - } - - /* For external PHYs there must be special handling */ - if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { - - SK_IN32(IoC, B2_GP_IO, &Reg); - - if (Port == 0) { - Reg |= GP_DIR_0; /* set to output */ - Reg &= ~GP_IO_0; /* set PHY reset (active low) */ - } - else { - Reg |= GP_DIR_2; /* set to output */ - Reg &= ~GP_IO_2; /* set PHY reset (active low) */ - } - /* reset external PHY */ - SK_OUT32(IoC, B2_GP_IO, Reg); - - /* short delay */ - SK_IN32(IoC, B2_GP_IO, &Reg); - } -} /* SkXmHardRst */ - - -/****************************************************************************** - * - * SkXmClearRst() - Release the PHY & XMAC reset - * - * Description: - * - * Returns: - * nothing - */ -static void SkXmClearRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U32 DWord; - - /* clear HW reset */ - SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); - - if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { - - SK_IN32(IoC, B2_GP_IO, &DWord); - - if (Port == 0) { - DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */ - } - else { - DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */ - } - /* Clear PHY reset */ - SK_OUT32(IoC, B2_GP_IO, DWord); - - /* Enable GMII interface */ - XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD); - } -} /* SkXmClearRst */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmSoftRst() - Do a GMAC software reset - * - * Description: - * The GPHY registers should not be destroyed during this - * kind of software reset. - * - * Returns: - * nothing - */ -static void SkGmSoftRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U16 EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000}; - SK_U16 RxCtrl; - - /* reset the statistics module */ - - /* disable all GMAC IRQs */ - SK_OUT8(IoC, GMAC_IRQ_MSK, 0); - - /* disable all PHY IRQs */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); - - /* clear the Hash Register */ - GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash); - - /* Enable Unicast and Multicast filtering */ - GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl); - - GM_OUT16(IoC, Port, GM_RX_CTRL, - (SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)); - -} /* SkGmSoftRst */ - - -/****************************************************************************** - * - * SkGmHardRst() - Do a GMAC hardware reset - * - * Description: - * - * Returns: - * nothing - */ -static void SkGmHardRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U32 DWord; - - /* WA code for COMA mode */ - if (pAC->GIni.GIYukonLite && - pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { - - SK_IN32(IoC, B2_GP_IO, &DWord); - - DWord |= (GP_DIR_9 | GP_IO_9); - - /* set PHY reset */ - SK_OUT32(IoC, B2_GP_IO, DWord); - } - - /* set GPHY Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET); - - /* set GMAC Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); - -} /* SkGmHardRst */ - - -/****************************************************************************** - * - * SkGmClearRst() - Release the GPHY & GMAC reset - * - * Description: - * - * Returns: - * nothing - */ -static void SkGmClearRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U32 DWord; - -#ifdef XXX - /* clear GMAC Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR); - - /* set GMAC Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); -#endif /* XXX */ - - /* WA code for COMA mode */ - if (pAC->GIni.GIYukonLite && - pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { - - SK_IN32(IoC, B2_GP_IO, &DWord); - - DWord |= GP_DIR_9; /* set to output */ - DWord &= ~GP_IO_9; /* clear PHY reset (active high) */ - - /* clear PHY reset */ - SK_OUT32(IoC, B2_GP_IO, DWord); - } - - /* set HWCFG_MODE */ - DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | - GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE | - (pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP : - GPC_HWCFG_GMII_FIB); - - /* set GPHY Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET); - - /* release GPHY Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR); - -#ifdef VCPU - VCpuWait(9000); -#endif /* VCPU */ - - /* clear GMAC Control reset */ - SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); - -#ifdef VCPU - VCpuWait(2000); - - SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord); - - SK_IN32(IoC, B0_ISRC, &DWord); -#endif /* VCPU */ - -} /* SkGmClearRst */ -#endif /* YUKON */ - - -/****************************************************************************** - * - * SkMacSoftRst() - Do a MAC software reset - * - * Description: calls a MAC software reset routine dep. on board type - * - * Returns: - * nothing - */ -void SkMacSoftRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - /* disable receiver and transmitter */ - SkMacRxTxDisable(pAC, IoC, Port); - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - SkXmSoftRst(pAC, IoC, Port); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - SkGmSoftRst(pAC, IoC, Port); - } -#endif /* YUKON */ - - /* flush the MAC's Rx and Tx FIFOs */ - SkMacFlushTxFifo(pAC, IoC, Port); - - SkMacFlushRxFifo(pAC, IoC, Port); - - pPrt->PState = SK_PRT_STOP; - -} /* SkMacSoftRst */ - - -/****************************************************************************** - * - * SkMacHardRst() - Do a MAC hardware reset - * - * Description: calls a MAC hardware reset routine dep. on board type - * - * Returns: - * nothing - */ -void SkMacHardRst( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - SkXmHardRst(pAC, IoC, Port); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - SkGmHardRst(pAC, IoC, Port); - } -#endif /* YUKON */ - - pAC->GIni.GP[Port].PState = SK_PRT_RESET; - -} /* SkMacHardRst */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmInitMac() - Initialize the XMAC II - * - * Description: - * Initialize the XMAC of the specified port. - * The XMAC must be reset or stopped before calling this function. - * - * Note: - * The XMAC's Rx and Tx state machine is still disabled when returning. - * - * Returns: - * nothing - */ -void SkXmInitMac( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - int i; - SK_U16 SWord; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PState == SK_PRT_STOP) { - /* Port State: SK_PRT_STOP */ - /* Verify that the reset bit is cleared */ - SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord); - - if ((SWord & MFF_SET_MAC_RST) != 0) { - /* PState does not match HW state */ - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); - /* Correct it */ - pPrt->PState = SK_PRT_RESET; - } - } - - if (pPrt->PState == SK_PRT_RESET) { - - SkXmClearRst(pAC, IoC, Port); - - if (pPrt->PhyType != SK_PHY_XMAC) { - /* read Id from external PHY (all have the same address) */ - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1); - - /* - * Optimize MDIO transfer by suppressing preamble. - * Must be done AFTER first access to BCOM chip. - */ - XM_IN16(IoC, Port, XM_MMU_CMD, &SWord); - - XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE); - - if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) { - /* - * Workaround BCOM Errata for the C0 type. - * Write magic patterns to reserved registers. - */ - i = 0; - while (BcomRegC0Hack[i].PhyReg != 0) { - SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg, - BcomRegC0Hack[i].PhyVal); - i++; - } - } - else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) { - /* - * Workaround BCOM Errata for the A1 type. - * Write magic patterns to reserved registers. - */ - i = 0; - while (BcomRegA1Hack[i].PhyReg != 0) { - SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg, - BcomRegA1Hack[i].PhyVal); - i++; - } - } - - /* - * Workaround BCOM Errata (#10523) for all BCom PHYs. - * Disable Power Management after reset. - */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); - - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, - (SK_U16)(SWord | PHY_B_AC_DIS_PM)); - - /* PHY LED initialization is done in SkGeXmitLED() */ - } - - /* Dummy read the Interrupt source register */ - XM_IN16(IoC, Port, XM_ISRC, &SWord); - - /* - * The auto-negotiation process starts immediately after - * clearing the reset. The auto-negotiation process should be - * started by the SIRQ, therefore stop it here immediately. - */ - SkMacInitPhy(pAC, IoC, Port, SK_FALSE); - -#ifdef TEST_ONLY - /* temp. code: enable signal detect */ - /* WARNING: do not override GMII setting above */ - XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG); -#endif - } - - /* - * configure the XMACs Station Address - * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A - * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B - */ - for (i = 0; i < 3; i++) { - /* - * The following 2 statements are together endianess - * independent. Remember this when changing. - */ - SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); - - XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord); - } - - /* Tx Inter Packet Gap (XM_TX_IPG): use default */ - /* Tx High Water Mark (XM_TX_HI_WM): use default */ - /* Tx Low Water Mark (XM_TX_LO_WM): use default */ - /* Host Request Threshold (XM_HT_THR): use default */ - /* Rx Request Threshold (XM_RX_THR): use default */ - /* Rx Low Water Mark (XM_RX_LO_WM): use default */ - - /* configure Rx High Water Mark (XM_RX_HI_WM) */ - XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM); - - /* Configure Tx Request Threshold */ - SWord = SK_XM_THR_SL; /* for single port */ - - if (pAC->GIni.GIMacsFound > 1) { - switch (pAC->GIni.GIPortUsage) { - case SK_RED_LINK: - SWord = SK_XM_THR_REDL; /* redundant link */ - break; - case SK_MUL_LINK: - SWord = SK_XM_THR_MULL; /* load balancing */ - break; - case SK_JUMBO_LINK: - SWord = SK_XM_THR_JUMBO; /* jumbo frames */ - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG); - break; - } - } - XM_OUT16(IoC, Port, XM_TX_THR, SWord); - - /* setup register defaults for the Tx Command Register */ - XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD); - - /* setup register defaults for the Rx Command Register */ - SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK; - - if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { - SWord |= XM_RX_BIG_PK_OK; - } - - if (pPrt->PLinkMode == SK_LMODE_HALF) { - /* - * If in manual half duplex mode the other side might be in - * full duplex mode, so ignore if a carrier extension is not seen - * on frames received - */ - SWord |= XM_RX_DIS_CEXT; - } - - XM_OUT16(IoC, Port, XM_RX_CMD, SWord); - - /* - * setup register defaults for the Mode Register - * - Don't strip error frames to avoid Store & Forward - * on the Rx side. - * - Enable 'Check Station Address' bit - * - Enable 'Check Address Array' bit - */ - XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE); - - /* - * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK) - * - Enable all bits excepting 'Octets Rx OK Low CntOv' - * and 'Octets Rx OK Hi Cnt Ov'. - */ - XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK); - - /* - * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK) - * - Enable all bits excepting 'Octets Tx OK Low CntOv' - * and 'Octets Tx OK Hi Cnt Ov'. - */ - XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK); - - /* - * Do NOT init XMAC interrupt mask here. - * All interrupts remain disable until link comes up! - */ - - /* - * Any additional configuration changes may be done now. - * The last action is to enable the Rx and Tx state machine. - * This should be done after the auto-negotiation process - * has been completed successfully. - */ -} /* SkXmInitMac */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmInitMac() - Initialize the GMAC - * - * Description: - * Initialize the GMAC of the specified port. - * The GMAC must be reset or stopped before calling this function. - * - * Note: - * The GMAC's Rx and Tx state machine is still disabled when returning. - * - * Returns: - * nothing - */ -void SkGmInitMac( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - int i; - SK_U16 SWord; - SK_U32 DWord; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PState == SK_PRT_STOP) { - /* Port State: SK_PRT_STOP */ - /* Verify that the reset bit is cleared */ - SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord); - - if ((DWord & GMC_RST_SET) != 0) { - /* PState does not match HW state */ - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); - /* Correct it */ - pPrt->PState = SK_PRT_RESET; - } - } - - if (pPrt->PState == SK_PRT_RESET) { - - SkGmHardRst(pAC, IoC, Port); - - SkGmClearRst(pAC, IoC, Port); - - /* Auto-negotiation ? */ - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - /* Auto-negotiation disabled */ - - /* get General Purpose Control */ - GM_IN16(IoC, Port, GM_GP_CTRL, &SWord); - - /* disable auto-update for speed, duplex and flow-control */ - SWord |= GM_GPCR_AU_ALL_DIS; - - /* setup General Purpose Control Register */ - GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); - - SWord = GM_GPCR_AU_ALL_DIS; - } - else { - SWord = 0; - } - - /* speed settings */ - switch (pPrt->PLinkSpeed) { - case SK_LSPEED_AUTO: - case SK_LSPEED_1000MBPS: - SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100; - break; - case SK_LSPEED_100MBPS: - SWord |= GM_GPCR_SPEED_100; - break; - case SK_LSPEED_10MBPS: - break; - } - - /* duplex settings */ - if (pPrt->PLinkMode != SK_LMODE_HALF) { - /* set full duplex */ - SWord |= GM_GPCR_DUP_FULL; - } - - /* flow-control settings */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - /* set Pause Off */ - SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF); - /* disable Tx & Rx flow-control */ - SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - break; - case SK_FLOW_MODE_LOC_SEND: - /* disable Rx flow-control */ - SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - break; - case SK_FLOW_MODE_SYMMETRIC: - case SK_FLOW_MODE_SYM_OR_REM: - /* enable Tx & Rx flow-control */ - break; - } - - /* setup General Purpose Control Register */ - GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); - - /* dummy read the Interrupt Source Register */ - SK_IN16(IoC, GMAC_IRQ_SRC, &SWord); - -#ifndef VCPU - /* read Id from PHY */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1); - - SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE); -#endif /* VCPU */ - } - - (void)SkGmResetCounter(pAC, IoC, Port); - - /* setup Transmit Control Register */ - GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres)); - - /* setup Receive Control Register */ - GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA | - GM_RXCR_CRC_DIS); - - /* setup Transmit Flow Control Register */ - GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff); - - /* setup Transmit Parameter Register */ -#ifdef VCPU - GM_IN16(IoC, Port, GM_TX_PARAM, &SWord); -#endif /* VCPU */ - - SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) | - TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) | - TX_IPG_JAM_DATA(pPrt->PMacJamIpgData); - - GM_OUT16(IoC, Port, GM_TX_PARAM, SWord); - - /* configure the Serial Mode Register */ -#ifdef VCPU - GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord); -#endif /* VCPU */ - - SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData); - - if (pPrt->PMacLimit4) { - /* reset of collision counter after 4 consecutive collisions */ - SWord |= GM_SMOD_LIMIT_4; - } - - if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { - /* enable jumbo mode (Max. Frame Length = 9018) */ - SWord |= GM_SMOD_JUMBO_ENA; - } - - GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord); - - /* - * configure the GMACs Station Addresses - * in PROM you can find our addresses at: - * B2_MAC_1 = xx xx xx xx xx x0 virtual address - * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A - * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort - */ - - for (i = 0; i < 3; i++) { - /* - * The following 2 statements are together endianess - * independent. Remember this when changing. - */ - /* physical address: will be used for pause frames */ - SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); - -#ifdef WA_DEV_16 - /* WA for deviation #16 */ - if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) { - /* swap the address bytes */ - SWord = ((SWord & 0xff00) >> 8) | ((SWord & 0x00ff) << 8); - - /* write to register in reversed order */ - GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord); - } - else { - GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); - } -#else - GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); -#endif /* WA_DEV_16 */ - - /* virtual address: will be used for data */ - SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord); - - GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord); - - /* reset Multicast filtering Hash registers 1-3 */ - GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0); - } - - /* reset Multicast filtering Hash register 4 */ - GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0); - - /* enable interrupt mask for counter overflows */ - GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0); - GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0); - GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0); - -#if defined(SK_DIAG) || defined(DEBUG) - /* read General Purpose Status */ - GM_IN16(IoC, Port, GM_GP_STAT, &SWord); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("MAC Stat Reg.=0x%04X\n", SWord)); -#endif /* SK_DIAG || DEBUG */ - -#ifdef SK_DIAG - c_print("MAC Stat Reg=0x%04X\n", SWord); -#endif /* SK_DIAG */ - -} /* SkGmInitMac */ -#endif /* YUKON */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmInitDupMd() - Initialize the XMACs Duplex Mode - * - * Description: - * This function initializes the XMACs Duplex Mode. - * It should be called after successfully finishing - * the Auto-negotiation Process - * - * Returns: - * nothing - */ -static void SkXmInitDupMd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - switch (pAC->GIni.GP[Port].PLinkModeStatus) { - case SK_LMODE_STAT_AUTOHALF: - case SK_LMODE_STAT_HALF: - /* Configuration Actions for Half Duplex Mode */ - /* - * XM_BURST = default value. We are probable not quick - * enough at the 'XMAC' bus to burst 8kB. - * The XMAC stops bursting if no transmit frames - * are available or the burst limit is exceeded. - */ - /* XM_TX_RT_LIM = default value (15) */ - /* XM_TX_STIME = default value (0xff = 4096 bit times) */ - break; - case SK_LMODE_STAT_AUTOFULL: - case SK_LMODE_STAT_FULL: - /* Configuration Actions for Full Duplex Mode */ - /* - * The duplex mode is configured by the PHY, - * therefore it seems to be that there is nothing - * to do here. - */ - break; - case SK_LMODE_STAT_UNKNOWN: - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG); - break; - } -} /* SkXmInitDupMd */ - - -/****************************************************************************** - * - * SkXmInitPauseMd() - initialize the Pause Mode to be used for this port - * - * Description: - * This function initializes the Pause Mode which should - * be used for this port. - * It should be called after successfully finishing - * the Auto-negotiation Process - * - * Returns: - * nothing - */ -static void SkXmInitPauseMd( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U32 DWord; - SK_U16 Word; - - pPrt = &pAC->GIni.GP[Port]; - - XM_IN16(IoC, Port, XM_MMU_CMD, &Word); - - if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE || - pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { - - /* Disable Pause Frame Reception */ - Word |= XM_MMU_IGN_PF; - } - else { - /* - * enabling pause frame reception is required for 1000BT - * because the XMAC is not reset if the link is going down - */ - /* Enable Pause Frame Reception */ - Word &= ~XM_MMU_IGN_PF; - } - - XM_OUT16(IoC, Port, XM_MMU_CMD, Word); - - XM_IN32(IoC, Port, XM_MODE, &DWord); - - if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC || - pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { - - /* - * Configure Pause Frame Generation - * Use internal and external Pause Frame Generation. - * Sending pause frames is edge triggered. - * Send a Pause frame with the maximum pause time if - * internal oder external FIFO full condition occurs. - * Send a zero pause time frame to re-start transmission. - */ - - /* XM_PAUSE_DA = '010000C28001' (default) */ - - /* XM_MAC_PTIME = 0xffff (maximum) */ - /* remember this value is defined in big endian (!) */ - XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff); - - /* Set Pause Mode in Mode Register */ - DWord |= XM_PAUSE_MODE; - - /* Set Pause Mode in MAC Rx FIFO */ - SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE); - } - else { - /* - * disable pause frame generation is required for 1000BT - * because the XMAC is not reset if the link is going down - */ - /* Disable Pause Mode in Mode Register */ - DWord &= ~XM_PAUSE_MODE; - - /* Disable Pause Mode in MAC Rx FIFO */ - SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE); - } - - XM_OUT32(IoC, Port, XM_MODE, DWord); -} /* SkXmInitPauseMd*/ - - -/****************************************************************************** - * - * SkXmInitPhyXmac() - Initialize the XMAC Phy registers - * - * Description: initializes all the XMACs Phy registers - * - * Note: - * - * Returns: - * nothing - */ -static void SkXmInitPhyXmac( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ - SK_GEPORT *pPrt; - SK_U16 Ctrl; - - pPrt = &pAC->GIni.GP[Port]; - Ctrl = 0; - - /* Auto-negotiation ? */ - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyXmac: no auto-negotiation Port %d\n", Port)); - /* Set DuplexMode in Config register */ - if (pPrt->PLinkMode == SK_LMODE_FULL) { - Ctrl |= PHY_CT_DUP_MD; - } - - /* - * Do NOT enable Auto-negotiation here. This would hold - * the link down because no IDLEs are transmitted - */ - } - else { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyXmac: with auto-negotiation Port %d\n", Port)); - /* Set Auto-negotiation advertisement */ - - /* Set Full/half duplex capabilities */ - switch (pPrt->PLinkMode) { - case SK_LMODE_AUTOHALF: - Ctrl |= PHY_X_AN_HD; - break; - case SK_LMODE_AUTOFULL: - Ctrl |= PHY_X_AN_FD; - break; - case SK_LMODE_AUTOBOTH: - Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, - SKERR_HWI_E015MSG); - } - - /* Set Flow-control capabilities */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - Ctrl |= PHY_X_P_NO_PAUSE; - break; - case SK_FLOW_MODE_LOC_SEND: - Ctrl |= PHY_X_P_ASYM_MD; - break; - case SK_FLOW_MODE_SYMMETRIC: - Ctrl |= PHY_X_P_SYM_MD; - break; - case SK_FLOW_MODE_SYM_OR_REM: - Ctrl |= PHY_X_P_BOTH_MD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - - /* Write AutoNeg Advertisement Register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl); - - /* Restart Auto-negotiation */ - Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG; - } - - if (DoLoop) { - /* Set the Phy Loopback bit, too */ - Ctrl |= PHY_CT_LOOP; - } - - /* Write to the Phy control register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl); -} /* SkXmInitPhyXmac */ - - -/****************************************************************************** - * - * SkXmInitPhyBcom() - Initialize the Broadcom Phy registers - * - * Description: initializes all the Broadcom Phy registers - * - * Note: - * - * Returns: - * nothing - */ -static void SkXmInitPhyBcom( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ - SK_GEPORT *pPrt; - SK_U16 Ctrl1; - SK_U16 Ctrl2; - SK_U16 Ctrl3; - SK_U16 Ctrl4; - SK_U16 Ctrl5; - - Ctrl1 = PHY_CT_SP1000; - Ctrl2 = 0; - Ctrl3 = PHY_SEL_TYPE; - Ctrl4 = PHY_B_PEC_EN_LTR; - Ctrl5 = PHY_B_AC_TX_TST; - - pPrt = &pAC->GIni.GP[Port]; - - /* manually Master/Slave ? */ - if (pPrt->PMSMode != SK_MS_MODE_AUTO) { - Ctrl2 |= PHY_B_1000C_MSE; - - if (pPrt->PMSMode == SK_MS_MODE_MASTER) { - Ctrl2 |= PHY_B_1000C_MSC; - } - } - /* Auto-negotiation ? */ - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyBcom: no auto-negotiation Port %d\n", Port)); - /* Set DuplexMode in Config register */ - if (pPrt->PLinkMode == SK_LMODE_FULL) { - Ctrl1 |= PHY_CT_DUP_MD; - } - - /* Determine Master/Slave manually if not already done */ - if (pPrt->PMSMode == SK_MS_MODE_AUTO) { - Ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ - } - - /* - * Do NOT enable Auto-negotiation here. This would hold - * the link down because no IDLES are transmitted - */ - } - else { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyBcom: with auto-negotiation Port %d\n", Port)); - /* Set Auto-negotiation advertisement */ - - /* - * Workaround BCOM Errata #1 for the C5 type. - * 1000Base-T Link Acquisition Failure in Slave Mode - * Set Repeater/DTE bit 10 of the 1000Base-T Control Register - */ - Ctrl2 |= PHY_B_1000C_RD; - - /* Set Full/half duplex capabilities */ - switch (pPrt->PLinkMode) { - case SK_LMODE_AUTOHALF: - Ctrl2 |= PHY_B_1000C_AHD; - break; - case SK_LMODE_AUTOFULL: - Ctrl2 |= PHY_B_1000C_AFD; - break; - case SK_LMODE_AUTOBOTH: - Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, - SKERR_HWI_E015MSG); - } - - /* Set Flow-control capabilities */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - Ctrl3 |= PHY_B_P_NO_PAUSE; - break; - case SK_FLOW_MODE_LOC_SEND: - Ctrl3 |= PHY_B_P_ASYM_MD; - break; - case SK_FLOW_MODE_SYMMETRIC: - Ctrl3 |= PHY_B_P_SYM_MD; - break; - case SK_FLOW_MODE_SYM_OR_REM: - Ctrl3 |= PHY_B_P_BOTH_MD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - - /* Restart Auto-negotiation */ - Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; - } - - /* Initialize LED register here? */ - /* No. Please do it in SkDgXmitLed() (if required) and swap - init order of LEDs and XMAC. (MAl) */ - - /* Write 1000Base-T Control Register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); - - /* Write AutoNeg Advertisement Register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); - - if (DoLoop) { - /* Set the Phy Loopback bit, too */ - Ctrl1 |= PHY_CT_LOOP; - } - - if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { - /* configure FIFO to high latency for transmission of ext. packets */ - Ctrl4 |= PHY_B_PEC_HIGH_LA; - - /* configure reception of extended packets */ - Ctrl5 |= PHY_B_AC_LONG_PACK; - - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5); - } - - /* Configure LED Traffic Mode and Jumbo Frame usage if specified */ - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4); - - /* Write to the Phy control register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Control Reg=0x%04X\n", Ctrl1)); -} /* SkXmInitPhyBcom */ -#endif /* GENESIS */ - -#ifdef YUKON -/****************************************************************************** - * - * SkGmInitPhyMarv() - Initialize the Marvell Phy registers - * - * Description: initializes all the Marvell Phy registers - * - * Note: - * - * Returns: - * nothing - */ -static void SkGmInitPhyMarv( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ - SK_GEPORT *pPrt; - SK_U16 PhyCtrl; - SK_U16 C1000BaseT; - SK_U16 AutoNegAdv; - SK_U16 ExtPhyCtrl; - SK_U16 LedCtrl; - SK_BOOL AutoNeg; -#if defined(SK_DIAG) || defined(DEBUG) - SK_U16 PhyStat; - SK_U16 PhyStat1; - SK_U16 PhySpecStat; -#endif /* SK_DIAG || DEBUG */ - - pPrt = &pAC->GIni.GP[Port]; - - /* Auto-negotiation ? */ - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - AutoNeg = SK_FALSE; - } - else { - AutoNeg = SK_TRUE; - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyMarv: Port %d, auto-negotiation %s\n", - Port, AutoNeg ? "ON" : "OFF")); - -#ifdef VCPU - VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n", - Port, DoLoop); -#else /* VCPU */ - if (DoLoop) { - /* Set 'MAC Power up'-bit, set Manual MDI configuration */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, - PHY_M_PC_MAC_POW_UP); - } - else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) { - /* Read Ext. PHY Specific Control */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); - - ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | - PHY_M_EC_MAC_S_MSK); - - ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) | - PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); - - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); - } - - /* Read PHY Control */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); - - if (!AutoNeg) { - /* Disable Auto-negotiation */ - PhyCtrl &= ~PHY_CT_ANE; - } - - PhyCtrl |= PHY_CT_RESET; - /* Assert software reset */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); -#endif /* VCPU */ - - PhyCtrl = 0 /* PHY_CT_COL_TST */; - C1000BaseT = 0; - AutoNegAdv = PHY_SEL_TYPE; - - /* manually Master/Slave ? */ - if (pPrt->PMSMode != SK_MS_MODE_AUTO) { - /* enable Manual Master/Slave */ - C1000BaseT |= PHY_M_1000C_MSE; - - if (pPrt->PMSMode == SK_MS_MODE_MASTER) { - C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */ - } - } - - /* Auto-negotiation ? */ - if (!AutoNeg) { - - if (pPrt->PLinkMode == SK_LMODE_FULL) { - /* Set Full Duplex Mode */ - PhyCtrl |= PHY_CT_DUP_MD; - } - - /* Set Master/Slave manually if not already done */ - if (pPrt->PMSMode == SK_MS_MODE_AUTO) { - C1000BaseT |= PHY_M_1000C_MSE; /* set it to Slave */ - } - - /* Set Speed */ - switch (pPrt->PLinkSpeed) { - case SK_LSPEED_AUTO: - case SK_LSPEED_1000MBPS: - PhyCtrl |= PHY_CT_SP1000; - break; - case SK_LSPEED_100MBPS: - PhyCtrl |= PHY_CT_SP100; - break; - case SK_LSPEED_10MBPS: - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, - SKERR_HWI_E019MSG); - } - - if (!DoLoop) { - PhyCtrl |= PHY_CT_RESET; - } - } - else { - /* Set Auto-negotiation advertisement */ - - if (pAC->GIni.GICopperType) { - /* Set Speed capabilities */ - switch (pPrt->PLinkSpeed) { - case SK_LSPEED_AUTO: - C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; - AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | - PHY_M_AN_10_FD | PHY_M_AN_10_HD; - break; - case SK_LSPEED_1000MBPS: - C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; - break; - case SK_LSPEED_100MBPS: - AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | - /* advertise 10Base-T also */ - PHY_M_AN_10_FD | PHY_M_AN_10_HD; - break; - case SK_LSPEED_10MBPS: - AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, - SKERR_HWI_E019MSG); - } - - /* Set Full/half duplex capabilities */ - switch (pPrt->PLinkMode) { - case SK_LMODE_AUTOHALF: - C1000BaseT &= ~PHY_M_1000C_AFD; - AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD); - break; - case SK_LMODE_AUTOFULL: - C1000BaseT &= ~PHY_M_1000C_AHD; - AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD); - break; - case SK_LMODE_AUTOBOTH: - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, - SKERR_HWI_E015MSG); - } - - /* Set Flow-control capabilities */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - AutoNegAdv |= PHY_B_P_NO_PAUSE; - break; - case SK_FLOW_MODE_LOC_SEND: - AutoNegAdv |= PHY_B_P_ASYM_MD; - break; - case SK_FLOW_MODE_SYMMETRIC: - AutoNegAdv |= PHY_B_P_SYM_MD; - break; - case SK_FLOW_MODE_SYM_OR_REM: - AutoNegAdv |= PHY_B_P_BOTH_MD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - } - else { /* special defines for FIBER (88E1011S only) */ - - /* Set Full/half duplex capabilities */ - switch (pPrt->PLinkMode) { - case SK_LMODE_AUTOHALF: - AutoNegAdv |= PHY_M_AN_1000X_AHD; - break; - case SK_LMODE_AUTOFULL: - AutoNegAdv |= PHY_M_AN_1000X_AFD; - break; - case SK_LMODE_AUTOBOTH: - AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, - SKERR_HWI_E015MSG); - } - - /* Set Flow-control capabilities */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - AutoNegAdv |= PHY_M_P_NO_PAUSE_X; - break; - case SK_FLOW_MODE_LOC_SEND: - AutoNegAdv |= PHY_M_P_ASYM_MD_X; - break; - case SK_FLOW_MODE_SYMMETRIC: - AutoNegAdv |= PHY_M_P_SYM_MD_X; - break; - case SK_FLOW_MODE_SYM_OR_REM: - AutoNegAdv |= PHY_M_P_BOTH_MD_X; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - } - - if (!DoLoop) { - /* Restart Auto-negotiation */ - PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG; - } - } - -#ifdef VCPU - /* - * E-mail from Gu Lin (08-03-2002): - */ - - /* Program PHY register 30 as 16'h0708 for simulation speed up */ - SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */); - - VCpuWait(2000); - -#else /* VCPU */ - - /* Write 1000Base-T Control Register */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT)); - - /* Write AutoNeg Advertisement Register */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); -#endif /* VCPU */ - - if (DoLoop) { - /* Set the PHY Loopback bit */ - PhyCtrl |= PHY_CT_LOOP; - -#ifdef XXX - /* Program PHY register 16 as 16'h0400 to force link good */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD); -#endif /* XXX */ - -#ifndef VCPU - if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) { - /* Write Ext. PHY Specific Control */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, - (SK_U16)((pPrt->PLinkSpeed + 2) << 4)); - } -#endif /* VCPU */ - } -#ifdef TEST_ONLY - else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) { - /* Write PHY Specific Control */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, - PHY_M_PC_EN_DET_MSK); - } -#endif - - /* Write to the PHY Control register */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); - -#ifdef VCPU - VCpuWait(2000); -#else - - LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS); - - if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) { - LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL; - } - - if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) { - LedCtrl |= PHY_M_LEDC_DP_CTRL; - } - - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl); - - if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) { - /* only in forced 100 Mbps mode */ - if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) { - - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER, - PHY_M_LED_MO_100(MO_LED_ON)); - } - } - -#ifdef SK_DIAG - c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl); - c_print("Set 1000 B-T=0x%04X\n", C1000BaseT); - c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv); - c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl); -#endif /* SK_DIAG */ - -#if defined(SK_DIAG) || defined(DEBUG) - /* Read PHY Control */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); - - /* Read 1000Base-T Control Register */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("1000B-T Ctrl =0x%04X\n", C1000BaseT)); - - /* Read AutoNeg Advertisement Register */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); - - /* Read Ext. PHY Specific Control */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); - - /* Read PHY Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Stat Reg.=0x%04X\n", PhyStat)); - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Stat Reg.=0x%04X\n", PhyStat1)); - - /* Read PHY Specific Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Spec Stat=0x%04X\n", PhySpecStat)); -#endif /* SK_DIAG || DEBUG */ - -#ifdef SK_DIAG - c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl); - c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT); - c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv); - c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl); - c_print("PHY Stat Reg=0x%04X\n", PhyStat); - c_print("PHY Stat Reg=0x%04X\n", PhyStat1); - c_print("PHY Spec Reg=0x%04X\n", PhySpecStat); -#endif /* SK_DIAG */ - -#endif /* VCPU */ - -} /* SkGmInitPhyMarv */ -#endif /* YUKON */ - - -#ifdef OTHER_PHY -/****************************************************************************** - * - * SkXmInitPhyLone() - Initialize the Level One Phy registers - * - * Description: initializes all the Level One Phy registers - * - * Note: - * - * Returns: - * nothing - */ -static void SkXmInitPhyLone( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ - SK_GEPORT *pPrt; - SK_U16 Ctrl1; - SK_U16 Ctrl2; - SK_U16 Ctrl3; - - Ctrl1 = PHY_CT_SP1000; - Ctrl2 = 0; - Ctrl3 = PHY_SEL_TYPE; - - pPrt = &pAC->GIni.GP[Port]; - - /* manually Master/Slave ? */ - if (pPrt->PMSMode != SK_MS_MODE_AUTO) { - Ctrl2 |= PHY_L_1000C_MSE; - - if (pPrt->PMSMode == SK_MS_MODE_MASTER) { - Ctrl2 |= PHY_L_1000C_MSC; - } - } - /* Auto-negotiation ? */ - if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { - /* - * level one spec say: "1000 Mbps: manual mode not allowed" - * but lets see what happens... - */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyLone: no auto-negotiation Port %d\n", Port)); - /* Set DuplexMode in Config register */ - if (pPrt->PLinkMode == SK_LMODE_FULL) { - Ctrl1 |= PHY_CT_DUP_MD; - } - - /* Determine Master/Slave manually if not already done */ - if (pPrt->PMSMode == SK_MS_MODE_AUTO) { - Ctrl2 |= PHY_L_1000C_MSE; /* set it to Slave */ - } - - /* - * Do NOT enable Auto-negotiation here. This would hold - * the link down because no IDLES are transmitted - */ - } - else { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("InitPhyLone: with auto-negotiation Port %d\n", Port)); - /* Set Auto-negotiation advertisement */ - - /* Set Full/half duplex capabilities */ - switch (pPrt->PLinkMode) { - case SK_LMODE_AUTOHALF: - Ctrl2 |= PHY_L_1000C_AHD; - break; - case SK_LMODE_AUTOFULL: - Ctrl2 |= PHY_L_1000C_AFD; - break; - case SK_LMODE_AUTOBOTH: - Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, - SKERR_HWI_E015MSG); - } - - /* Set Flow-control capabilities */ - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - Ctrl3 |= PHY_L_P_NO_PAUSE; - break; - case SK_FLOW_MODE_LOC_SEND: - Ctrl3 |= PHY_L_P_ASYM_MD; - break; - case SK_FLOW_MODE_SYMMETRIC: - Ctrl3 |= PHY_L_P_SYM_MD; - break; - case SK_FLOW_MODE_SYM_OR_REM: - Ctrl3 |= PHY_L_P_BOTH_MD; - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - - /* Restart Auto-negotiation */ - Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG; - } - - /* Write 1000Base-T Control Register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); - - /* Write AutoNeg Advertisement Register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); - - if (DoLoop) { - /* Set the Phy Loopback bit, too */ - Ctrl1 |= PHY_CT_LOOP; - } - - /* Write to the Phy control register */ - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Control Reg=0x%04X\n", Ctrl1)); -} /* SkXmInitPhyLone */ - - -/****************************************************************************** - * - * SkXmInitPhyNat() - Initialize the National Phy registers - * - * Description: initializes all the National Phy registers - * - * Note: - * - * Returns: - * nothing - */ -static void SkXmInitPhyNat( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ -/* todo: National */ -} /* SkXmInitPhyNat */ -#endif /* OTHER_PHY */ - - -/****************************************************************************** - * - * SkMacInitPhy() - Initialize the PHY registers - * - * Description: calls the Init PHY routines dep. on board type - * - * Note: - * - * Returns: - * nothing - */ -void SkMacInitPhy( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - switch (pPrt->PhyType) { - case SK_PHY_XMAC: - SkXmInitPhyXmac(pAC, IoC, Port, DoLoop); - break; - case SK_PHY_BCOM: - SkXmInitPhyBcom(pAC, IoC, Port, DoLoop); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - SkXmInitPhyLone(pAC, IoC, Port, DoLoop); - break; - case SK_PHY_NAT: - SkXmInitPhyNat(pAC, IoC, Port, DoLoop); - break; -#endif /* OTHER_PHY */ - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - SkGmInitPhyMarv(pAC, IoC, Port, DoLoop); - } -#endif /* YUKON */ - -} /* SkMacInitPhy */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmAutoNegDoneXmac() - Auto-negotiation handling - * - * Description: - * This function handles the auto-negotiation if the Done bit is set. - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -static int SkXmAutoNegDoneXmac( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 ResAb; /* Resolved Ability */ - SK_U16 LPAb; /* Link Partner Ability */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegDoneXmac, Port %d\n", Port)); - - pPrt = &pAC->GIni.GP[Port]; - - /* Get PHY parameters */ - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb); - SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); - - if ((LPAb & PHY_X_AN_RFB) != 0) { - /* At least one of the remote fault bit is set */ - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Remote fault bit set Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_OTHER); - } - - /* Check Duplex mismatch */ - if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; - } - else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; - } - else { - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_DUP_CAP); - } - - /* Check PAUSE mismatch */ - /* We are NOT using chapter 4.23 of the Xaqti manual */ - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC || - pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) && - (LPAb & PHY_X_P_SYM_MD) != 0) { - /* Symmetric PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; - } - else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM && - (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) { - /* Enable PAUSE receive, disable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; - } - else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND && - (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) { - /* Disable PAUSE receive, enable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; - } - else { - /* PAUSE mismatch -> no PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; - } - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; - - return(SK_AND_OK); -} /* SkXmAutoNegDoneXmac */ - - -/****************************************************************************** - * - * SkXmAutoNegDoneBcom() - Auto-negotiation handling - * - * Description: - * This function handles the auto-negotiation if the Done bit is set. - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -static int SkXmAutoNegDoneBcom( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 LPAb; /* Link Partner Ability */ - SK_U16 AuxStat; /* Auxiliary Status */ - -#ifdef TEST_ONLY -01-Sep-2000 RA;:;: - SK_U16 ResAb; /* Resolved Ability */ -#endif /* 0 */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegDoneBcom, Port %d\n", Port)); - pPrt = &pAC->GIni.GP[Port]; - - /* Get PHY parameters */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb); -#ifdef TEST_ONLY -01-Sep-2000 RA;:;: - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); -#endif /* 0 */ - - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat); - - if ((LPAb & PHY_B_AN_RF) != 0) { - /* Remote fault bit is set: Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Remote fault bit set Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_OTHER); - } - - /* Check Duplex mismatch */ - if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; - } - else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; - } - else { - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_DUP_CAP); - } - -#ifdef TEST_ONLY -01-Sep-2000 RA;:;: - /* Check Master/Slave resolution */ - if ((ResAb & PHY_B_1000S_MSF) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Master/Slave Fault Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PMSStatus = SK_MS_STAT_FAULT; - return(SK_AND_OTHER); - } - - pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? - SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; -#endif /* 0 */ - - /* Check PAUSE mismatch ??? */ - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) { - /* Symmetric PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; - } - else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) { - /* Enable PAUSE receive, disable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; - } - else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) { - /* Disable PAUSE receive, enable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; - } - else { - /* PAUSE mismatch -> no PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; - } - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; - - return(SK_AND_OK); -} /* SkXmAutoNegDoneBcom */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmAutoNegDoneMarv() - Auto-negotiation handling - * - * Description: - * This function handles the auto-negotiation if the Done bit is set. - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -static int SkGmAutoNegDoneMarv( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 LPAb; /* Link Partner Ability */ - SK_U16 ResAb; /* Resolved Ability */ - SK_U16 AuxStat; /* Auxiliary Status */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegDoneMarv, Port %d\n", Port)); - pPrt = &pAC->GIni.GP[Port]; - - /* Get PHY parameters */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb); - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Link P.Abil.=0x%04X\n", LPAb)); - - if ((LPAb & PHY_M_AN_RF) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Remote fault bit set Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_OTHER); - } - - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); - - /* Check Master/Slave resolution */ - if ((ResAb & PHY_B_1000S_MSF) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Master/Slave Fault Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PMSStatus = SK_MS_STAT_FAULT; - return(SK_AND_OTHER); - } - - pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? - (SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE; - - /* Read PHY Specific Status */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat); - - /* Check Speed & Duplex resolved */ - if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; - return(SK_AND_DUP_CAP); - } - - if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; - } - else { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; - } - - /* Check PAUSE mismatch ??? */ - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) { - /* Symmetric PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; - } - else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) { - /* Enable PAUSE receive, disable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; - } - else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) { - /* Disable PAUSE receive, enable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; - } - else { - /* PAUSE mismatch -> no PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; - } - - /* set used link speed */ - switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) { - case (unsigned)PHY_M_PS_SPEED_1000: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; - break; - case PHY_M_PS_SPEED_100: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; - break; - default: - pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; - } - - return(SK_AND_OK); -} /* SkGmAutoNegDoneMarv */ -#endif /* YUKON */ - - -#ifdef OTHER_PHY -/****************************************************************************** - * - * SkXmAutoNegDoneLone() - Auto-negotiation handling - * - * Description: - * This function handles the auto-negotiation if the Done bit is set. - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -static int SkXmAutoNegDoneLone( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 ResAb; /* Resolved Ability */ - SK_U16 LPAb; /* Link Partner Ability */ - SK_U16 QuickStat; /* Auxiliary Status */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegDoneLone, Port %d\n", Port)); - pPrt = &pAC->GIni.GP[Port]; - - /* Get PHY parameters */ - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb); - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb); - SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat); - - if ((LPAb & PHY_L_AN_RF) != 0) { - /* Remote fault bit is set */ - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegFail: Remote fault bit set Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - return(SK_AND_OTHER); - } - - /* Check Duplex mismatch */ - if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; - } - else { - pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; - } - - /* Check Master/Slave resolution */ - if ((ResAb & PHY_L_1000S_MSF) != 0) { - /* Error */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("Master/Slave Fault Port %d\n", Port)); - pPrt->PAutoNegFail = SK_TRUE; - pPrt->PMSStatus = SK_MS_STAT_FAULT; - return(SK_AND_OTHER); - } - else if (ResAb & PHY_L_1000S_MSR) { - pPrt->PMSStatus = SK_MS_STAT_MASTER; - } - else { - pPrt->PMSStatus = SK_MS_STAT_SLAVE; - } - - /* Check PAUSE mismatch */ - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - /* we must manually resolve the abilities here */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; - - switch (pPrt->PFlowCtrlMode) { - case SK_FLOW_MODE_NONE: - /* default */ - break; - case SK_FLOW_MODE_LOC_SEND: - if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == - (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) { - /* Disable PAUSE receive, enable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; - } - break; - case SK_FLOW_MODE_SYMMETRIC: - if ((QuickStat & PHY_L_QS_PAUSE) != 0) { - /* Symmetric PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; - } - break; - case SK_FLOW_MODE_SYM_OR_REM: - if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == - PHY_L_QS_AS_PAUSE) { - /* Enable PAUSE receive, disable PAUSE transmit */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; - } - else if ((QuickStat & PHY_L_QS_PAUSE) != 0) { - /* Symmetric PAUSE */ - pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; - } - break; - default: - SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, - SKERR_HWI_E016MSG); - } - - return(SK_AND_OK); -} /* SkXmAutoNegDoneLone */ - - -/****************************************************************************** - * - * SkXmAutoNegDoneNat() - Auto-negotiation handling - * - * Description: - * This function handles the auto-negotiation if the Done bit is set. - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -static int SkXmAutoNegDoneNat( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ -/* todo: National */ - return(SK_AND_OK); -} /* SkXmAutoNegDoneNat */ -#endif /* OTHER_PHY */ - - -/****************************************************************************** - * - * SkMacAutoNegDone() - Auto-negotiation handling - * - * Description: calls the auto-negotiation done routines dep. on board type - * - * Returns: - * SK_AND_OK o.k. - * SK_AND_DUP_CAP Duplex capability error happened - * SK_AND_OTHER Other error happened - */ -int SkMacAutoNegDone( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - int Rtv; - - Rtv = SK_AND_OK; - - pPrt = &pAC->GIni.GP[Port]; - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - switch (pPrt->PhyType) { - - case SK_PHY_XMAC: - Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port); - break; - case SK_PHY_BCOM: - Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port); - break; - case SK_PHY_NAT: - Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port); - break; -#endif /* OTHER_PHY */ - default: - return(SK_AND_OTHER); - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port); - } -#endif /* YUKON */ - - if (Rtv != SK_AND_OK) { - return(Rtv); - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNeg done Port %d\n", Port)); - - /* We checked everything and may now enable the link */ - pPrt->PAutoNegFail = SK_FALSE; - - SkMacRxTxEnable(pAC, IoC, Port); - - return(SK_AND_OK); -} /* SkMacAutoNegDone */ - - -/****************************************************************************** - * - * SkMacRxTxEnable() - Enable Rx/Tx activity if port is up - * - * Description: enables Rx/Tx dep. on board type - * - * Returns: - * 0 o.k. - * != 0 Error happened - */ -int SkMacRxTxEnable( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 Reg; /* 16-bit register value */ - SK_U16 IntMask; /* MAC interrupt mask */ -#ifdef GENESIS - SK_U16 SWord; -#endif - - pPrt = &pAC->GIni.GP[Port]; - - if (!pPrt->PHWLinkUp) { - /* The Hardware link is NOT up */ - return(0); - } - - if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF || - pPrt->PLinkMode == SK_LMODE_AUTOFULL || - pPrt->PLinkMode == SK_LMODE_AUTOBOTH) && - pPrt->PAutoNegFail) { - /* Auto-negotiation is not done or failed */ - return(0); - } - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* set Duplex Mode and Pause Mode */ - SkXmInitDupMd(pAC, IoC, Port); - - SkXmInitPauseMd(pAC, IoC, Port); - - /* - * Initialize the Interrupt Mask Register. Default IRQs are... - * - Link Asynchronous Event - * - Link Partner requests config - * - Auto Negotiation Done - * - Rx Counter Event Overflow - * - Tx Counter Event Overflow - * - Transmit FIFO Underrun - */ - IntMask = XM_DEF_MSK; - -#ifdef DEBUG - /* add IRQ for Receive FIFO Overflow */ - IntMask &= ~XM_IS_RXF_OV; -#endif /* DEBUG */ - - if (pPrt->PhyType != SK_PHY_XMAC) { - /* disable GP0 interrupt bit */ - IntMask |= XM_IS_INP_ASS; - } - XM_OUT16(IoC, Port, XM_IMSK, IntMask); - - /* get MMU Command Reg. */ - XM_IN16(IoC, Port, XM_MMU_CMD, &Reg); - - if (pPrt->PhyType != SK_PHY_XMAC && - (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || - pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) { - /* set to Full Duplex */ - Reg |= XM_MMU_GMII_FD; - } - - switch (pPrt->PhyType) { - case SK_PHY_BCOM: - /* - * Workaround BCOM Errata (#10523) for all BCom Phys - * Enable Power Management after link up - */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, - (SK_U16)(SWord & ~PHY_B_AC_DIS_PM)); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, - (SK_U16)PHY_B_DEF_MSK); - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK); - break; - case SK_PHY_NAT: - /* todo National: - SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */ - /* no interrupts possible from National ??? */ - break; -#endif /* OTHER_PHY */ - } - - /* enable Rx/Tx */ - XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* - * Initialize the Interrupt Mask Register. Default IRQs are... - * - Rx Counter Event Overflow - * - Tx Counter Event Overflow - * - Transmit FIFO Underrun - */ - IntMask = GMAC_DEF_MSK; - -#ifdef DEBUG - /* add IRQ for Receive FIFO Overrun */ - IntMask |= GM_IS_RX_FF_OR; -#endif /* DEBUG */ - - SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask); - - /* get General Purpose Control */ - GM_IN16(IoC, Port, GM_GP_CTRL, &Reg); - - if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || - pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) { - /* set to Full Duplex */ - Reg |= GM_GPCR_DUP_FULL; - } - - /* enable Rx/Tx */ - GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA | - GM_GPCR_TX_ENA)); - -#ifndef VCPU - /* Enable all PHY interrupts */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, - (SK_U16)PHY_M_DEF_MSK); -#endif /* VCPU */ - } -#endif /* YUKON */ - - return(0); - -} /* SkMacRxTxEnable */ - - -/****************************************************************************** - * - * SkMacRxTxDisable() - Disable Receiver and Transmitter - * - * Description: disables Rx/Tx dep. on board type - * - * Returns: N/A - */ -void SkMacRxTxDisable( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U16 Word; - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - XM_IN16(IoC, Port, XM_MMU_CMD, &Word); - - XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - - /* dummy read to ensure writing */ - XM_IN16(IoC, Port, XM_MMU_CMD, &Word); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - - GM_IN16(IoC, Port, GM_GP_CTRL, &Word); - - GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA | - GM_GPCR_TX_ENA))); - - /* dummy read to ensure writing */ - GM_IN16(IoC, Port, GM_GP_CTRL, &Word); - } -#endif /* YUKON */ - -} /* SkMacRxTxDisable */ - - -/****************************************************************************** - * - * SkMacIrqDisable() - Disable IRQ from MAC - * - * Description: sets the IRQ-mask to disable IRQ dep. on board type - * - * Returns: N/A - */ -void SkMacIrqDisable( -SK_AC *pAC, /* Adapter Context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; -#ifdef GENESIS - SK_U16 Word; -#endif - - pPrt = &pAC->GIni.GP[Port]; - -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - - /* disable all XMAC IRQs */ - XM_OUT16(IoC, Port, XM_IMSK, 0xffff); - - /* Disable all PHY interrupts */ - switch (pPrt->PhyType) { - case SK_PHY_BCOM: - /* Make sure that PHY is initialized */ - if (pPrt->PState != SK_PRT_RESET) { - /* NOT allowed if BCOM is in RESET state */ - /* Workaround BCOM Errata (#10523) all BCom */ - /* Disable Power Management if link is down */ - SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, - (SK_U16)(Word | PHY_B_AC_DIS_PM)); - SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); - } - break; -#ifdef OTHER_PHY - case SK_PHY_LONE: - SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); - break; - case SK_PHY_NAT: - /* todo: National - SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ - break; -#endif /* OTHER_PHY */ - } - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* disable all GMAC IRQs */ - SK_OUT8(IoC, GMAC_IRQ_MSK, 0); - -#ifndef VCPU - /* Disable all PHY interrupts */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); -#endif /* VCPU */ - } -#endif /* YUKON */ - -} /* SkMacIrqDisable */ - - -#ifdef SK_DIAG -/****************************************************************************** - * - * SkXmSendCont() - Enable / Disable Send Continuous Mode - * - * Description: enable / disable Send Continuous Mode on XMAC - * - * Returns: - * nothing - */ -void SkXmSendCont( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL Enable) /* Enable / Disable */ -{ - SK_U32 MdReg; - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - - if (Enable) { - MdReg |= XM_MD_TX_CONT; - } - else { - MdReg &= ~XM_MD_TX_CONT; - } - /* setup Mode Register */ - XM_OUT32(IoC, Port, XM_MODE, MdReg); - -} /* SkXmSendCont */ - - -/****************************************************************************** - * - * SkMacTimeStamp() - Enable / Disable Time Stamp - * - * Description: enable / disable Time Stamp generation for Rx packets - * - * Returns: - * nothing - */ -void SkMacTimeStamp( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL Enable) /* Enable / Disable */ -{ - SK_U32 MdReg; - SK_U8 TimeCtrl; - - if (pAC->GIni.GIGenesis) { - - XM_IN32(IoC, Port, XM_MODE, &MdReg); - - if (Enable) { - MdReg |= XM_MD_ATS; - } - else { - MdReg &= ~XM_MD_ATS; - } - /* setup Mode Register */ - XM_OUT32(IoC, Port, XM_MODE, MdReg); - } - else { - if (Enable) { - TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ; - } - else { - TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ; - } - /* Start/Stop Time Stamp Timer */ - SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl); - } - -} /* SkMacTimeStamp*/ - -#else /* !SK_DIAG */ - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg - * - * This function analyses the Interrupt status word. If any of the - * Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable - * is set true. - */ -void SkXmAutoNegLipaXmac( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_U16 IStatus) /* Interrupt Status word to analyse */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && - (IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) { - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n", - Port, IStatus)); - pPrt->PLipaAutoNeg = SK_LIPA_AUTO; - } -} /* SkXmAutoNegLipaXmac */ -#endif /* GENESIS */ - - -/****************************************************************************** - * - * SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg - * - * This function analyses the PHY status word. - * If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable - * is set true. - */ -void SkMacAutoNegLipaPhy( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_U16 PhyStat) /* PHY Status word to analyse */ -{ - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && - (PhyStat & PHY_ST_AN_OVER) != 0) { - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n", - Port, PhyStat)); - pPrt->PLipaAutoNeg = SK_LIPA_AUTO; - } -} /* SkMacAutoNegLipaPhy */ - - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmIrq() - Interrupt Service Routine - * - * Description: services an Interrupt Request of the XMAC - * - * Note: - * With an external PHY, some interrupt bits are not meaningfull any more: - * - LinkAsyncEvent (bit #14) XM_IS_LNK_AE - * - LinkPartnerReqConfig (bit #10) XM_IS_LIPA_RC - * - Page Received (bit #9) XM_IS_RX_PAGE - * - NextPageLoadedForXmt (bit #8) XM_IS_TX_PAGE - * - AutoNegDone (bit #7) XM_IS_AND - * Also probably not valid any more is the GP0 input bit: - * - GPRegisterBit0set XM_IS_INP_ASS - * - * Returns: - * nothing - */ -static void SkXmIrq( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_EVPARA Para; - SK_U16 IStatus; /* Interrupt status read from the XMAC */ - SK_U16 IStatus2; -#ifdef SK_SLIM - SK_U64 OverflowStatus; -#endif - - pPrt = &pAC->GIni.GP[Port]; - - XM_IN16(IoC, Port, XM_ISRC, &IStatus); - - /* LinkPartner Auto-negable? */ - if (pPrt->PhyType == SK_PHY_XMAC) { - SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus); - } - else { - /* mask bits that are not used with ext. PHY */ - IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC | - XM_IS_RX_PAGE | XM_IS_TX_PAGE | - XM_IS_AND | XM_IS_INP_ASS); - } - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); - - if (!pPrt->PHWLinkUp) { - /* Spurious XMAC interrupt */ - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("SkXmIrq: spurious interrupt on Port %d\n", Port)); - return; - } - - if ((IStatus & XM_IS_INP_ASS) != 0) { - /* Reread ISR Register if link is not in sync */ - XM_IN16(IoC, Port, XM_ISRC, &IStatus2); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n", - Port, IStatus, IStatus2)); - IStatus &= ~XM_IS_INP_ASS; - IStatus |= IStatus2; - } - - if ((IStatus & XM_IS_LNK_AE) != 0) { - /* not used, GP0 is used instead */ - } - - if ((IStatus & XM_IS_TX_ABORT) != 0) { - /* not used */ - } - - if ((IStatus & XM_IS_FRC_INT) != 0) { - /* not used, use ASIC IRQ instead if needed */ - } - - if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) { - SkHWLinkDown(pAC, IoC, Port); - - /* Signal to RLMT */ - Para.Para32[0] = (SK_U32)Port; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); - - /* Start workaround Errata #2 timer */ - SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, - SKGE_HWAC, SK_HWEV_WATIM, Para); - } - - if ((IStatus & XM_IS_RX_PAGE) != 0) { - /* not used */ - } - - if ((IStatus & XM_IS_TX_PAGE) != 0) { - /* not used */ - } - - if ((IStatus & XM_IS_AND) != 0) { - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("SkXmIrq: AND on link that is up Port %d\n", Port)); - } - - if ((IStatus & XM_IS_TSC_OV) != 0) { - /* not used */ - } - - /* Combined Tx & Rx Counter Overflow SIRQ Event */ - if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) { -#ifdef SK_SLIM - SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); -#else - Para.Para32[0] = (SK_U32)Port; - Para.Para32[1] = (SK_U32)IStatus; - SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); -#endif /* SK_SLIM */ - } - - if ((IStatus & XM_IS_RXF_OV) != 0) { - /* normal situation -> no effect */ -#ifdef DEBUG - pPrt->PRxOverCnt++; -#endif /* DEBUG */ - } - - if ((IStatus & XM_IS_TXF_UR) != 0) { - /* may NOT happen -> error log */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); - } - - if ((IStatus & XM_IS_TX_COMP) != 0) { - /* not served here */ - } - - if ((IStatus & XM_IS_RX_COMP) != 0) { - /* not served here */ - } -} /* SkXmIrq */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmIrq() - Interrupt Service Routine - * - * Description: services an Interrupt Request of the GMAC - * - * Note: - * - * Returns: - * nothing - */ -static void SkGmIrq( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U8 IStatus; /* Interrupt status */ -#ifdef SK_SLIM - SK_U64 OverflowStatus; -#else - SK_EVPARA Para; -#endif - - pPrt = &pAC->GIni.GP[Port]; - - SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus); - -#ifdef XXX - /* LinkPartner Auto-negable? */ - SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus); -#endif /* XXX */ - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, - ("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); - - /* Combined Tx & Rx Counter Overflow SIRQ Event */ - if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) { - /* these IRQs will be cleared by reading GMACs register */ -#ifdef SK_SLIM - SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); -#else - Para.Para32[0] = (SK_U32)Port; - Para.Para32[1] = (SK_U32)IStatus; - SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); -#endif - } - - if (IStatus & GM_IS_RX_FF_OR) { - /* clear GMAC Rx FIFO Overrun IRQ */ - SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO); -#ifdef DEBUG - pPrt->PRxOverCnt++; -#endif /* DEBUG */ - } - - if (IStatus & GM_IS_TX_FF_UR) { - /* clear GMAC Tx FIFO Underrun IRQ */ - SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU); - /* may NOT happen -> error log */ - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); - } - - if (IStatus & GM_IS_TX_COMPL) { - /* not served here */ - } - - if (IStatus & GM_IS_RX_COMPL) { - /* not served here */ - } -} /* SkGmIrq */ -#endif /* YUKON */ - - -/****************************************************************************** - * - * SkMacIrq() - Interrupt Service Routine for MAC - * - * Description: calls the Interrupt Service Routine dep. on board type - * - * Returns: - * nothing - */ -void SkMacIrq( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port) /* Port Index (MAC_1 + n) */ -{ -#ifdef GENESIS - if (pAC->GIni.GIGenesis) { - /* IRQ from XMAC */ - SkXmIrq(pAC, IoC, Port); - } -#endif /* GENESIS */ - -#ifdef YUKON - if (pAC->GIni.GIYukon) { - /* IRQ from GMAC */ - SkGmIrq(pAC, IoC, Port); - } -#endif /* YUKON */ - -} /* SkMacIrq */ - -#endif /* !SK_DIAG */ - -#ifdef GENESIS -/****************************************************************************** - * - * SkXmUpdateStats() - Force the XMAC to output the current statistic - * - * Description: - * The XMAC holds its statistic internally. To obtain the current - * values a command must be sent so that the statistic data will - * be written to a predefined memory area on the adapter. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkXmUpdateStats( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port) /* Port Index (MAC_1 + n) */ -{ - SK_GEPORT *pPrt; - SK_U16 StatReg; - int WaitIndex; - - pPrt = &pAC->GIni.GP[Port]; - WaitIndex = 0; - - /* Send an update command to XMAC specified */ - XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); - - /* - * It is an auto-clearing register. If the command bits - * went to zero again, the statistics are transferred. - * Normally the command should be executed immediately. - * But just to be sure we execute a loop. - */ - do { - - XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg); - - if (++WaitIndex > 10) { - - SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG); - - return(1); - } - } while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0); - - return(0); -} /* SkXmUpdateStats */ - - -/****************************************************************************** - * - * SkXmMacStatistic() - Get XMAC counter value - * - * Description: - * Gets the 32bit counter value. Except for the octet counters - * the lower 32bit are counted in hardware and the upper 32bit - * must be counted in software by monitoring counter overflow interrupts. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkXmMacStatistic( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 StatAddr, /* MIB counter base address */ -SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ -{ - if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); - - return(1); - } - - XM_IN32(IoC, Port, StatAddr, pVal); - - return(0); -} /* SkXmMacStatistic */ - - -/****************************************************************************** - * - * SkXmResetCounter() - Clear MAC statistic counter - * - * Description: - * Force the XMAC to clear its statistic counter. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkXmResetCounter( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port) /* Port Index (MAC_1 + n) */ -{ - XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); - /* Clear two times according to Errata #3 */ - XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); - - return(0); -} /* SkXmResetCounter */ - - -/****************************************************************************** - * - * SkXmOverflowStatus() - Gets the status of counter overflow interrupt - * - * Description: - * Checks the source causing an counter overflow interrupt. On success the - * resulting counter overflow status is written to , whereas the - * upper dword stores the XMAC ReceiveCounterEvent register and the lower - * dword the XMAC TransmitCounterEvent register. - * - * Note: - * For XMAC the interrupt source is a self-clearing register, so the source - * must be checked only once. SIRQ module does another check to be sure - * that no interrupt get lost during process time. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkXmOverflowStatus( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 IStatus, /* Interupt Status from MAC */ -SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ -{ - SK_U64 Status; /* Overflow status */ - SK_U32 RegVal; - - Status = 0; - - if ((IStatus & XM_IS_RXC_OV) != 0) { - - XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal); - Status |= (SK_U64)RegVal << 32; - } - - if ((IStatus & XM_IS_TXC_OV) != 0) { - - XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal); - Status |= (SK_U64)RegVal; - } - - *pStatus = Status; - - return(0); -} /* SkXmOverflowStatus */ -#endif /* GENESIS */ - - -#ifdef YUKON -/****************************************************************************** - * - * SkGmUpdateStats() - Force the GMAC to output the current statistic - * - * Description: - * Empty function for GMAC. Statistic data is accessible in direct way. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkGmUpdateStats( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port) /* Port Index (MAC_1 + n) */ -{ - return(0); -} - - -/****************************************************************************** - * - * SkGmMacStatistic() - Get GMAC counter value - * - * Description: - * Gets the 32bit counter value. Except for the octet counters - * the lower 32bit are counted in hardware and the upper 32bit - * must be counted in software by monitoring counter overflow interrupts. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkGmMacStatistic( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 StatAddr, /* MIB counter base address */ -SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ -{ - - if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) { - - SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr)); - return(1); - } - - GM_IN32(IoC, Port, StatAddr, pVal); - - return(0); -} /* SkGmMacStatistic */ - - -/****************************************************************************** - * - * SkGmResetCounter() - Clear MAC statistic counter - * - * Description: - * Force GMAC to clear its statistic counter. - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkGmResetCounter( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port) /* Port Index (MAC_1 + n) */ -{ - SK_U16 Reg; /* Phy Address Register */ - SK_U16 Word; - int i; - - GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg); - - /* set MIB Clear Counter Mode */ - GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR); - - /* read all MIB Counters with Clear Mode set */ - for (i = 0; i < GM_MIB_CNT_SIZE; i++) { - /* the reset is performed only when the lower 16 bits are read */ - GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word); - } - - /* clear MIB Clear Counter Mode */ - GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg); - - return(0); -} /* SkGmResetCounter */ - - -/****************************************************************************** - * - * SkGmOverflowStatus() - Gets the status of counter overflow interrupt - * - * Description: - * Checks the source causing an counter overflow interrupt. On success the - * resulting counter overflow status is written to , whereas the - * the following bit coding is used: - * 63:56 - unused - * 55:48 - TxRx interrupt register bit7:0 - * 32:47 - Rx interrupt register - * 31:24 - unused - * 23:16 - TxRx interrupt register bit15:8 - * 15:0 - Tx interrupt register - * - * Returns: - * 0: success - * 1: something went wrong - */ -int SkGmOverflowStatus( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -unsigned int Port, /* Port Index (MAC_1 + n) */ -SK_U16 IStatus, /* Interupt Status from MAC */ -SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ -{ - SK_U64 Status; /* Overflow status */ - SK_U16 RegVal; - - Status = 0; - - if ((IStatus & GM_IS_RX_CO_OV) != 0) { - /* this register is self-clearing after read */ - GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal); - Status |= (SK_U64)RegVal << 32; - } - - if ((IStatus & GM_IS_TX_CO_OV) != 0) { - /* this register is self-clearing after read */ - GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal); - Status |= (SK_U64)RegVal; - } - - /* this register is self-clearing after read */ - GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal); - /* Rx overflow interrupt register bits (LoByte)*/ - Status |= (SK_U64)((SK_U8)RegVal) << 48; - /* Tx overflow interrupt register bits (HiByte)*/ - Status |= (SK_U64)(RegVal >> 8) << 16; - - *pStatus = Status; - - return(0); -} /* SkGmOverflowStatus */ - - -#ifndef SK_SLIM -/****************************************************************************** - * - * SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test - * - * Description: - * starts the cable diagnostic test if 'StartTest' is true - * gets the results if 'StartTest' is true - * - * NOTE: this test is meaningful only when link is down - * - * Returns: - * 0: success - * 1: no YUKON copper - * 2: test in progress - */ -int SkGmCableDiagStatus( -SK_AC *pAC, /* adapter context */ -SK_IOC IoC, /* IO context */ -int Port, /* Port Index (MAC_1 + n) */ -SK_BOOL StartTest) /* flag for start / get result */ -{ - int i; - SK_U16 RegVal; - SK_GEPORT *pPrt; - - pPrt = &pAC->GIni.GP[Port]; - - if (pPrt->PhyType != SK_PHY_MARV_COPPER) { - - return(1); - } - - if (StartTest) { - /* only start the cable test */ - if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) { - /* apply TDR workaround from Marvell */ - SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e); - - SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00); - SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800); - SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400); - SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000); - SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100); - } - - /* set address to 0 for MDI[0] */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0); - - /* Read Cable Diagnostic Reg */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); - - /* start Cable Diagnostic Test */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, - (SK_U16)(RegVal | PHY_M_CABD_ENA_TEST)); - - return(0); - } - - /* Read Cable Diagnostic Reg */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); - - SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, - ("PHY Cable Diag.=0x%04X\n", RegVal)); - - if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) { - /* test is running */ - return(2); - } - - /* get the test results */ - for (i = 0; i < 4; i++) { - /* set address to i for MDI[i] */ - SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i); - - /* get Cable Diagnostic values */ - SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); - - pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK); - - pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13); - } - - return(0); -} /* SkGmCableDiagStatus */ -#endif /* !SK_SLIM */ -#endif /* YUKON */ - -/* End of file */ -- cgit v1.1 From fa6557aff47f25e5b6b92c930a9b60a12acd0b58 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jan 2008 00:14:12 +0200 Subject: remove the obsolete xircom_tulip_cb driver The xircom_tulip_cb driver has been replaced the xircom_cb driver, and since it depended on BROKEN_ON_SMP it e.g. was no longer present in many distribution kernels. This patch therefore removes it. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/tulip/Kconfig | 15 +- drivers/net/tulip/Makefile | 1 - drivers/net/tulip/xircom_tulip_cb.c | 1726 ----------------------------------- 3 files changed, 1 insertion(+), 1741 deletions(-) delete mode 100644 drivers/net/tulip/xircom_tulip_cb.c (limited to 'drivers') diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index 20ac150..d913405 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -141,7 +141,7 @@ config ULI526X be called uli526x. config PCMCIA_XIRCOM - tristate "Xircom CardBus support (new driver)" + tristate "Xircom CardBus support" depends on CARDBUS ---help--- This driver is for the Digital "Tulip" Ethernet CardBus adapters. @@ -152,17 +152,4 @@ config PCMCIA_XIRCOM To compile this driver as a module, choose M here. The module will be called xircom_cb. If unsure, say N. -config PCMCIA_XIRTULIP - tristate "Xircom Tulip-like CardBus support (old driver)" - depends on CARDBUS && BROKEN_ON_SMP - select CRC32 - ---help--- - This driver is for the Digital "Tulip" Ethernet CardBus adapters. - It should work with most DEC 21*4*-based chips/ethercards, as well - as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and - ASIX. - - To compile this driver as a module, choose M here. The module will - be called xircom_tulip_cb. If unsure, say N. - endif # NET_TULIP diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 451090d..200cbf7 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -2,7 +2,6 @@ # Makefile for the Linux "Tulip" family network device drivers. # -obj-$(CONFIG_PCMCIA_XIRTULIP) += xircom_tulip_cb.o obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o obj-$(CONFIG_DM9102) += dmfe.o obj-$(CONFIG_WINBOND_840) += winbond-840.o diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c deleted file mode 100644 index c3f8e30..0000000 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ /dev/null @@ -1,1726 +0,0 @@ -/* xircom_tulip_cb.c: A Xircom CBE-100 ethernet driver for Linux. */ -/* - Written/copyright 1994-1999 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - -*/ - -#define DRV_NAME "xircom_tulip_cb" -#define DRV_VERSION "0.92" -#define DRV_RELDATE "June 27, 2006" - -/* A few user-configurable values. */ - -#define xircom_debug debug -#ifdef XIRCOM_DEBUG -static int xircom_debug = XIRCOM_DEBUG; -#else -static int xircom_debug = 1; -#endif - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 25; - -#define MAX_UNITS 4 -/* Used to pass the full-duplex flag, etc. */ -static int full_duplex[MAX_UNITS]; -static int options[MAX_UNITS]; -static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */ - -/* Keep the ring sizes a power of two for efficiency. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 -#define RX_RING_SIZE 32 - -/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ -#ifdef __alpha__ -static int rx_copybreak = 1518; -#else -static int rx_copybreak = 100; -#endif - -/* - Set the bus performance register. - Typical: Set 16 longword cache alignment, no burst limit. - Cache alignment bits 15:14 Burst length 13:8 - 0000 No alignment 0x00000000 unlimited 0800 8 longwords - 4000 8 longwords 0100 1 longword 1000 16 longwords - 8000 16 longwords 0200 2 longwords 2000 32 longwords - C000 32 longwords 0400 4 longwords - Warning: many older 486 systems are broken and require setting 0x00A04800 - 8 longword cache alignment, 8 longword burst. - ToDo: Non-Intel setting could be better. -*/ - -#if defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) -static int csr0 = 0x01A00000 | 0xE000; -#elif defined(__powerpc__) -static int csr0 = 0x01B00000 | 0x8000; -#elif defined(CONFIG_SPARC) -static int csr0 = 0x01B00080 | 0x8000; -#elif defined(__i386__) -static int csr0 = 0x01A00000 | 0x8000; -#else -#warning Processor architecture undefined! -static int csr0 = 0x00A00000 | 0x4800; -#endif - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (4 * HZ) -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ -#define PKT_SETUP_SZ 192 /* Size of the setup frame */ - -/* PCI registers */ -#define PCI_POWERMGMT 0x40 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include /* Processor type for cache alignment. */ -#include - - -/* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = -KERN_INFO DRV_NAME ".c derived from tulip.c:v0.91 4/14/99 becker@scyld.com\n" -KERN_INFO " unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE "\n"; - -MODULE_AUTHOR("Donald Becker "); -MODULE_DESCRIPTION("Xircom CBE-100 ethernet driver"); -MODULE_LICENSE("GPL v2"); -MODULE_VERSION(DRV_VERSION); - -module_param(debug, int, 0); -module_param(max_interrupt_work, int, 0); -module_param(rx_copybreak, int, 0); -module_param(csr0, int, 0); - -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); - -#define RUN_AT(x) (jiffies + (x)) - -/* - Theory of Operation - -I. Board Compatibility - -This device driver was forked from the driver for the DECchip "Tulip", -Digital's single-chip ethernet controllers for PCI. It supports Xircom's -almost-Tulip-compatible CBE-100 CardBus adapters. - -II. Board-specific settings - -PCI bus devices are configured by the system at boot time, so no jumpers -need to be set on the board. The system BIOS preferably should assign the -PCI INTA signal to an otherwise unused system IRQ line. - -III. Driver operation - -IIIa. Ring buffers - -The Xircom can use either ring buffers or lists of Tx and Rx descriptors. -This driver uses statically allocated rings of Rx and Tx descriptors, set at -compile time by RX/TX_RING_SIZE. This version of the driver allocates skbuffs -for the Rx ring buffers at open() time and passes the skb->data field to the -Xircom as receive data buffers. When an incoming frame is less than -RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is -copied to the new skbuff. When the incoming frame is larger, the skbuff is -passed directly up the protocol stack and replaced by a newly allocated -skbuff. - -The RX_COPYBREAK value is chosen to trade-off the memory wasted by -using a full-sized skbuff for small frames vs. the copying costs of larger -frames. For small frames the copying cost is negligible (esp. considering -that we are pre-loading the cache with immediately useful header -information). For large frames the copying cost is non-trivial, and the -larger copy might flush the cache of useful data. A subtle aspect of this -choice is that the Xircom only receives into longword aligned buffers, thus -the IP header at offset 14 isn't longword aligned for further processing. -Copied frames are put into the new skbuff at an offset of "+2", thus copying -has the beneficial effect of aligning the IP header and preloading the -cache. - -IIIC. Synchronization -The driver runs as two independent, single-threaded flows of control. One -is the send-packet routine, which enforces single-threaded use by the -dev->tbusy flag. The other thread is the interrupt handler, which is single -threaded by the hardware and other software. - -The send packet thread has partial control over the Tx ring and 'dev->tbusy' -flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next -queue slot is empty, it clears the tbusy flag when finished otherwise it sets -the 'tp->tx_full' flag. - -The interrupt handler has exclusive control over the Rx ring and records stats -from the Tx ring. (The Tx-done interrupt can't be selectively turned off, so -we can't avoid the interrupt overhead by having the Tx routine reap the Tx -stats.) After reaping the stats, it marks the queue entry as empty by setting -the 'base' to zero. Iff the 'tp->tx_full' flag is set, it clears both the -tx_full and tbusy flags. - -IV. Notes - -IVb. References - -http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html -http://www.digital.com (search for current 21*4* datasheets and "21X4 SROM") -http://www.national.com/pf/DP/DP83840A.html - -IVc. Errata - -*/ - -/* A full-duplex map for media types. */ -enum MediaIs { - MediaIsFD = 1, MediaAlwaysFD=2, MediaIsMII=4, MediaIsFx=8, - MediaIs100=16}; -static const char media_cap[] = -{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20 }; - -/* Offsets to the Command and Status Registers, "CSRs". All accesses - must be longword instructions and quadword aligned. */ -enum xircom_offsets { - CSR0=0, CSR1=0x08, CSR2=0x10, CSR3=0x18, CSR4=0x20, CSR5=0x28, - CSR6=0x30, CSR7=0x38, CSR8=0x40, CSR9=0x48, CSR10=0x50, CSR11=0x58, - CSR12=0x60, CSR13=0x68, CSR14=0x70, CSR15=0x78, CSR16=0x04, }; - -/* The bits in the CSR5 status registers, mostly interrupt sources. */ -enum status_bits { - LinkChange=0x08000000, - NormalIntr=0x10000, NormalIntrMask=0x00014045, - AbnormalIntr=0x8000, AbnormalIntrMask=0x0a00a5a2, - ReservedIntrMask=0xe0001a18, - EarlyRxIntr=0x4000, BusErrorIntr=0x2000, - EarlyTxIntr=0x400, RxDied=0x100, RxNoBuf=0x80, RxIntr=0x40, - TxFIFOUnderflow=0x20, TxNoBuf=0x04, TxDied=0x02, TxIntr=0x01, -}; - -enum csr0_control_bits { - EnableMWI=0x01000000, EnableMRL=0x00800000, - EnableMRM=0x00200000, EqualBusPrio=0x02, - SoftwareReset=0x01, -}; - -enum csr6_control_bits { - ReceiveAllBit=0x40000000, AllMultiBit=0x80, PromiscBit=0x40, - HashFilterBit=0x01, FullDuplexBit=0x0200, - TxThresh10=0x400000, TxStoreForw=0x200000, - TxThreshMask=0xc000, TxThreshShift=14, - EnableTx=0x2000, EnableRx=0x02, - ReservedZeroMask=0x8d930134, ReservedOneMask=0x320c0000, - EnableTxRx=(EnableTx | EnableRx), -}; - - -enum tbl_flag { - HAS_MII=1, HAS_ACPI=2, -}; -static struct xircom_chip_table { - char *chip_name; - int valid_intrs; /* CSR7 interrupt enable settings */ - int flags; -} xircom_tbl[] = { - { "Xircom Cardbus Adapter", - LinkChange | NormalIntr | AbnormalIntr | BusErrorIntr | - RxDied | RxNoBuf | RxIntr | TxFIFOUnderflow | TxNoBuf | TxDied | TxIntr, - HAS_MII | HAS_ACPI, }, - { NULL, }, -}; -/* This matches the table above. */ -enum chips { - X3201_3, -}; - - -/* The Xircom Rx and Tx buffer descriptors. */ -struct xircom_rx_desc { - s32 status; - s32 length; - u32 buffer1, buffer2; -}; - -struct xircom_tx_desc { - s32 status; - s32 length; - u32 buffer1, buffer2; /* We use only buffer 1. */ -}; - -enum tx_desc0_status_bits { - Tx0DescOwned=0x80000000, Tx0DescError=0x8000, Tx0NoCarrier=0x0800, - Tx0LateColl=0x0200, Tx0ManyColl=0x0100, Tx0Underflow=0x02, -}; -enum tx_desc1_status_bits { - Tx1ComplIntr=0x80000000, Tx1LastSeg=0x40000000, Tx1FirstSeg=0x20000000, - Tx1SetupPkt=0x08000000, Tx1DisableCRC=0x04000000, Tx1RingWrap=0x02000000, - Tx1ChainDesc=0x01000000, Tx1NoPad=0x800000, Tx1HashSetup=0x400000, - Tx1WholePkt=(Tx1FirstSeg | Tx1LastSeg), -}; -enum rx_desc0_status_bits { - Rx0DescOwned=0x80000000, Rx0DescError=0x8000, Rx0NoSpace=0x4000, - Rx0Runt=0x0800, Rx0McastPkt=0x0400, Rx0FirstSeg=0x0200, Rx0LastSeg=0x0100, - Rx0HugeFrame=0x80, Rx0CRCError=0x02, - Rx0WholePkt=(Rx0FirstSeg | Rx0LastSeg), -}; -enum rx_desc1_status_bits { - Rx1RingWrap=0x02000000, Rx1ChainDesc=0x01000000, -}; - -struct xircom_private { - struct xircom_rx_desc rx_ring[RX_RING_SIZE]; - struct xircom_tx_desc tx_ring[TX_RING_SIZE]; - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - - /* The X3201-3 requires 4-byte aligned tx bufs */ - struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE]; - - /* The addresses of receive-in-place skbuffs. */ - struct sk_buff* rx_skbuff[RX_RING_SIZE]; - u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */ - int chip_id; - struct net_device_stats stats; - unsigned int cur_rx, cur_tx; /* The next free ring entry */ - unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ - unsigned int tx_full:1; /* The Tx queue is full. */ - unsigned int speed100:1; - unsigned int full_duplex:1; /* Full-duplex operation requested. */ - unsigned int autoneg:1; - unsigned int default_port:4; /* Last dev->if_port value. */ - unsigned int open:1; - unsigned int csr0; /* CSR0 setting. */ - unsigned int csr6; /* Current CSR6 control settings. */ - u16 to_advertise; /* NWay capabilities advertised. */ - u16 advertising[4]; - signed char phys[4], mii_cnt; /* MII device addresses. */ - int saved_if_port; - struct pci_dev *pdev; - spinlock_t lock; -}; - -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static void xircom_up(struct net_device *dev); -static void xircom_down(struct net_device *dev); -static int xircom_open(struct net_device *dev); -static void xircom_tx_timeout(struct net_device *dev); -static void xircom_init_ring(struct net_device *dev); -static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev); -static int xircom_rx(struct net_device *dev); -static void xircom_media_change(struct net_device *dev); -static irqreturn_t xircom_interrupt(int irq, void *dev_instance); -static int xircom_close(struct net_device *dev); -static struct net_device_stats *xircom_get_stats(struct net_device *dev); -static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void set_rx_mode(struct net_device *dev); -static void check_duplex(struct net_device *dev); -static const struct ethtool_ops ops; - - -/* The Xircom cards are picky about when certain bits in CSR6 can be - manipulated. Keith Owens . */ -static void outl_CSR6(u32 newcsr6, long ioaddr) -{ - const int strict_bits = - TxThresh10 | TxStoreForw | TxThreshMask | EnableTxRx | FullDuplexBit; - int csr5, csr5_22_20, csr5_19_17, currcsr6, attempts = 200; - unsigned long flags; - save_flags(flags); - cli(); - /* mask out the reserved bits that always read 0 on the Xircom cards */ - newcsr6 &= ~ReservedZeroMask; - /* or in the reserved bits that always read 1 */ - newcsr6 |= ReservedOneMask; - currcsr6 = inl(ioaddr + CSR6); - if (((newcsr6 & strict_bits) == (currcsr6 & strict_bits)) || - ((currcsr6 & ~EnableTxRx) == 0)) { - outl(newcsr6, ioaddr + CSR6); /* safe */ - restore_flags(flags); - return; - } - /* make sure the transmitter and receiver are stopped first */ - currcsr6 &= ~EnableTxRx; - while (1) { - csr5 = inl(ioaddr + CSR5); - if (csr5 == 0xffffffff) - break; /* cannot read csr5, card removed? */ - csr5_22_20 = csr5 & 0x700000; - csr5_19_17 = csr5 & 0x0e0000; - if ((csr5_22_20 == 0 || csr5_22_20 == 0x600000) && - (csr5_19_17 == 0 || csr5_19_17 == 0x80000 || csr5_19_17 == 0xc0000)) - break; /* both are stopped or suspended */ - if (!--attempts) { - printk(KERN_INFO DRV_NAME ": outl_CSR6 too many attempts," - "csr5=0x%08x\n", csr5); - outl(newcsr6, ioaddr + CSR6); /* unsafe but do it anyway */ - restore_flags(flags); - return; - } - outl(currcsr6, ioaddr + CSR6); - udelay(1); - } - /* now it is safe to change csr6 */ - outl(newcsr6, ioaddr + CSR6); - restore_flags(flags); -} - - -static void __devinit read_mac_address(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - int i, j; - unsigned char tuple, link, data_id, data_count; - - /* Xircom has its address stored in the CIS; - * we access it through the boot rom interface for now - * this might not work, as the CIS is not parsed but I - * (danilo) use the offset I found on my card's CIS !!! - * - * Doug Ledford: I changed this routine around so that it - * walks the CIS memory space, parsing the config items, and - * finds the proper lan_node_id tuple and uses the data - * stored there. - */ - outl(1 << 12, ioaddr + CSR9); /* enable boot rom access */ - for (i = 0x100; i < 0x1f7; i += link+2) { - outl(i, ioaddr + CSR10); - tuple = inl(ioaddr + CSR9) & 0xff; - outl(i + 1, ioaddr + CSR10); - link = inl(ioaddr + CSR9) & 0xff; - outl(i + 2, ioaddr + CSR10); - data_id = inl(ioaddr + CSR9) & 0xff; - outl(i + 3, ioaddr + CSR10); - data_count = inl(ioaddr + CSR9) & 0xff; - if ( (tuple == 0x22) && - (data_id == 0x04) && (data_count == 0x06) ) { - /* - * This is it. We have the data we want. - */ - for (j = 0; j < 6; j++) { - outl(i + j + 4, ioaddr + CSR10); - dev->dev_addr[j] = inl(ioaddr + CSR9) & 0xff; - } - break; - } else if (link == 0) { - break; - } - } -} - - -/* - * locate the MII interfaces and initialize them. - * we disable full-duplex modes here, - * because we don't know how to handle them. - */ -static void find_mii_transceivers(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int phy, phy_idx; - - if (media_cap[tp->default_port] & MediaIsMII) { - u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 }; - tp->to_advertise = media2advert[tp->default_port - 9]; - } else - tp->to_advertise = - /*ADVERTISE_100BASE4 | ADVERTISE_100FULL |*/ ADVERTISE_100HALF | - /*ADVERTISE_10FULL |*/ ADVERTISE_10HALF | ADVERTISE_CSMA; - - /* Find the connected MII xcvrs. - Doing this in open() would allow detecting external xcvrs later, - but takes much time. */ - for (phy = 0, phy_idx = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) { - int mii_status = mdio_read(dev, phy, MII_BMSR); - if ((mii_status & (BMSR_100BASE4 | BMSR_100HALF | BMSR_10HALF)) == BMSR_100BASE4 || - ((mii_status & BMSR_100BASE4) == 0 && - (mii_status & (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | BMSR_10HALF)) != 0)) { - int mii_reg0 = mdio_read(dev, phy, MII_BMCR); - int mii_advert = mdio_read(dev, phy, MII_ADVERTISE); - int reg4 = ((mii_status >> 6) & tp->to_advertise) | ADVERTISE_CSMA; - tp->phys[phy_idx] = phy; - tp->advertising[phy_idx++] = reg4; - printk(KERN_INFO "%s: MII transceiver #%d " - "config %4.4x status %4.4x advertising %4.4x.\n", - dev->name, phy, mii_reg0, mii_status, mii_advert); - } - } - tp->mii_cnt = phy_idx; - if (phy_idx == 0) { - printk(KERN_INFO "%s: ***WARNING***: No MII transceiver found!\n", - dev->name); - tp->phys[0] = 0; - } -} - - -/* - * To quote Arjan van de Ven: - * transceiver_voodoo() enables the external UTP plug thingy. - * it's called voodoo as I stole this code and cannot cross-reference - * it with the specification. - * Actually it seems to go like this: - * - GPIO2 enables the MII itself so we can talk to it. The MII gets reset - * so any prior MII settings are lost. - * - GPIO0 enables the TP port so the MII can talk to the network. - * - a software reset will reset both GPIO pins. - * I also moved the software reset here, because doing it in xircom_up() - * required enabling the GPIO pins each time, which reset the MII each time. - * Thus we couldn't control the MII -- which sucks because we don't know - * how to handle full-duplex modes so we *must* disable them. - */ -static void transceiver_voodoo(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ - outl(SoftwareReset, ioaddr + CSR0); - udelay(2); - - /* Deassert reset. */ - outl(tp->csr0, ioaddr + CSR0); - - /* Reset the xcvr interface and turn on heartbeat. */ - outl(0x0008, ioaddr + CSR15); - udelay(5); /* The delays are Xircom-recommended to give the - * chipset time to reset the actual hardware - * on the PCMCIA card - */ - outl(0xa8050000, ioaddr + CSR15); - udelay(5); - outl(0xa00f0000, ioaddr + CSR15); - udelay(5); - - outl_CSR6(0, ioaddr); - //outl_CSR6(FullDuplexBit, ioaddr); -} - - -static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct net_device *dev; - struct xircom_private *tp; - static int board_idx = -1; - int chip_idx = id->driver_data; - long ioaddr; - int i; - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - //printk(KERN_INFO "xircom_init_one(%s)\n", pci_name(pdev)); - - board_idx++; - - if (pci_enable_device(pdev)) - return -ENODEV; - - pci_set_master(pdev); - - ioaddr = pci_resource_start(pdev, 0); - dev = alloc_etherdev(sizeof(*tp)); - if (!dev) { - printk (KERN_ERR DRV_NAME "%d: cannot alloc etherdev, aborting\n", board_idx); - return -ENOMEM; - } - SET_NETDEV_DEV(dev, &pdev->dev); - - dev->base_addr = ioaddr; - dev->irq = pdev->irq; - - if (pci_request_regions(pdev, dev->name)) { - printk (KERN_ERR DRV_NAME " %d: cannot reserve PCI resources, aborting\n", board_idx); - goto err_out_free_netdev; - } - - /* Bring the chip out of sleep mode. - Caution: Snooze mode does not work with some boards! */ - if (xircom_tbl[chip_idx].flags & HAS_ACPI) - pci_write_config_dword(pdev, PCI_POWERMGMT, 0); - - /* Stop the chip's Tx and Rx processes. */ - outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr); - /* Clear the missed-packet counter. */ - (volatile int)inl(ioaddr + CSR8); - - tp = netdev_priv(dev); - - spin_lock_init(&tp->lock); - tp->pdev = pdev; - tp->chip_id = chip_idx; - /* BugFixes: The 21143-TD hangs with PCI Write-and-Invalidate cycles. */ - /* XXX: is this necessary for Xircom? */ - tp->csr0 = csr0 & ~EnableMWI; - - pci_set_drvdata(pdev, dev); - - /* The lower four bits are the media type. */ - if (board_idx >= 0 && board_idx < MAX_UNITS) { - tp->default_port = options[board_idx] & 15; - if ((options[board_idx] & 0x90) || full_duplex[board_idx] > 0) - tp->full_duplex = 1; - if (mtu[board_idx] > 0) - dev->mtu = mtu[board_idx]; - } - if (dev->mem_start) - tp->default_port = dev->mem_start; - if (tp->default_port) { - if (media_cap[tp->default_port] & MediaAlwaysFD) - tp->full_duplex = 1; - } - if (tp->full_duplex) - tp->autoneg = 0; - else - tp->autoneg = 1; - tp->speed100 = 1; - - /* The Xircom-specific entries in the device structure. */ - dev->open = &xircom_open; - dev->hard_start_xmit = &xircom_start_xmit; - dev->stop = &xircom_close; - dev->get_stats = &xircom_get_stats; - dev->do_ioctl = &xircom_ioctl; -#ifdef HAVE_MULTICAST - dev->set_multicast_list = &set_rx_mode; -#endif - dev->tx_timeout = xircom_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - SET_ETHTOOL_OPS(dev, &ops); - - transceiver_voodoo(dev); - - read_mac_address(dev); - - if (register_netdev(dev)) - goto err_out_cleardev; - - printk(KERN_INFO "%s: %s rev %d at %#3lx,", - dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr); - for (i = 0; i < 6; i++) - printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]); - printk(", IRQ %d.\n", dev->irq); - - if (xircom_tbl[chip_idx].flags & HAS_MII) { - find_mii_transceivers(dev); - check_duplex(dev); - } - - return 0; - -err_out_cleardev: - pci_set_drvdata(pdev, NULL); - pci_release_regions(pdev); -err_out_free_netdev: - free_netdev(dev); - return -ENODEV; -} - - -/* MII transceiver control section. - Read and write the MII registers using software-generated serial - MDIO protocol. See the MII specifications or DP83840A data sheet - for details. */ - -/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back PCI I/O cycles, but we insert a delay to avoid - "overclocking" issues or future 66Mhz PCI. */ -#define mdio_delay() inl(mdio_addr) - -/* Read and write the MII registers using software-generated serial - MDIO protocol. It is just different enough from the EEPROM protocol - to not share code. The maxium data clock rate is 2.5 Mhz. */ -#define MDIO_SHIFT_CLK 0x10000 -#define MDIO_DATA_WRITE0 0x00000 -#define MDIO_DATA_WRITE1 0x20000 -#define MDIO_ENB 0x00000 /* Ignore the 0x02000 databook setting. */ -#define MDIO_ENB_IN 0x40000 -#define MDIO_DATA_READ 0x80000 - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - int i; - int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; - int retval = 0; - long ioaddr = dev->base_addr; - long mdio_addr = ioaddr + CSR9; - - /* Establish sync by sending at least 32 logic ones. */ - for (i = 32; i >= 0; i--) { - outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - - outl(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { - outl(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - retval = (retval << 1) | ((inl(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); - outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - return (retval>>1) & 0xffff; -} - - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - int i; - int cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; - long ioaddr = dev->base_addr; - long mdio_addr = ioaddr + CSR9; - - /* Establish sync by sending 32 logic ones. */ - for (i = 32; i >= 0; i--) { - outl(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0; - outl(MDIO_ENB | dataval, mdio_addr); - mdio_delay(); - outl(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - outl(MDIO_ENB_IN, mdio_addr); - mdio_delay(); - outl(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); - mdio_delay(); - } - return; -} - - -static void -xircom_up(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - int i; - - xircom_init_ring(dev); - /* Clear the tx ring */ - for (i = 0; i < TX_RING_SIZE; i++) { - tp->tx_skbuff[i] = NULL; - tp->tx_ring[i].status = 0; - } - - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: xircom_up() irq %d.\n", dev->name, dev->irq); - - outl(virt_to_bus(tp->rx_ring), ioaddr + CSR3); - outl(virt_to_bus(tp->tx_ring), ioaddr + CSR4); - - tp->saved_if_port = dev->if_port; - if (dev->if_port == 0) - dev->if_port = tp->default_port; - - tp->csr6 = TxThresh10 /*| FullDuplexBit*/; /* XXX: why 10 and not 100? */ - - set_rx_mode(dev); - - /* Start the chip's Tx to process setup frame. */ - outl_CSR6(tp->csr6, ioaddr); - outl_CSR6(tp->csr6 | EnableTx, ioaddr); - - /* Acknowledge all outstanding interrupts sources */ - outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); - /* Enable interrupts by setting the interrupt mask. */ - outl(xircom_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); - /* Enable Rx */ - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - /* Rx poll demand */ - outl(0, ioaddr + CSR2); - - /* Tell the net layer we're ready */ - netif_start_queue (dev); - - /* Check current media state */ - xircom_media_change(dev); - - if (xircom_debug > 2) { - printk(KERN_DEBUG "%s: Done xircom_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n", - dev->name, inl(ioaddr + CSR0), inl(ioaddr + CSR5), - inl(ioaddr + CSR6)); - } -} - - -static int -xircom_open(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - - if (request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev)) - return -EAGAIN; - - xircom_up(dev); - tp->open = 1; - - return 0; -} - - -static void xircom_tx_timeout(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - if (media_cap[dev->if_port] & MediaIsMII) { - /* Do nothing -- the media monitor should handle this. */ - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Transmit timeout using MII device.\n", - dev->name); - } - -#if defined(way_too_many_messages) - if (xircom_debug > 3) { - int i; - for (i = 0; i < RX_RING_SIZE; i++) { - u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); - int j; - printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x " - "%2.2x %2.2x %2.2x.\n", - i, (unsigned int)tp->rx_ring[i].status, - (unsigned int)tp->rx_ring[i].length, - (unsigned int)tp->rx_ring[i].buffer1, - (unsigned int)tp->rx_ring[i].buffer2, - buf[0], buf[1], buf[2]); - for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) printk(" %2.2x", buf[j]); - printk(" j=%d.\n", j); - } - printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); - for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); - for (i = 0; i < TX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); - printk("\n"); - } -#endif - - /* Stop and restart the chip's Tx/Rx processes . */ - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - /* Trigger an immediate transmit demand. */ - outl(0, ioaddr + CSR1); - - dev->trans_start = jiffies; - netif_wake_queue (dev); - tp->stats.tx_errors++; -} - - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void xircom_init_ring(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int i; - - tp->tx_full = 0; - tp->cur_rx = tp->cur_tx = 0; - tp->dirty_rx = tp->dirty_tx = 0; - - for (i = 0; i < RX_RING_SIZE; i++) { - tp->rx_ring[i].status = 0; - tp->rx_ring[i].length = PKT_BUF_SZ; - tp->rx_ring[i].buffer2 = virt_to_bus(&tp->rx_ring[i+1]); - tp->rx_skbuff[i] = NULL; - } - /* Mark the last entry as wrapping the ring. */ - tp->rx_ring[i-1].length = PKT_BUF_SZ | Rx1RingWrap; - tp->rx_ring[i-1].buffer2 = virt_to_bus(&tp->rx_ring[0]); - - for (i = 0; i < RX_RING_SIZE; i++) { - /* Note the receive buffer must be longword aligned. - dev_alloc_skb() provides 16 byte alignment. But do *not* - use skb_reserve() to align the IP header! */ - struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); - tp->rx_skbuff[i] = skb; - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[i].status = Rx0DescOwned; /* Owned by Xircom chip */ - tp->rx_ring[i].buffer1 = virt_to_bus(skb->data); - } - tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - - /* The Tx buffer descriptor is filled in as needed, but we - do need to clear the ownership bit. */ - for (i = 0; i < TX_RING_SIZE; i++) { - tp->tx_skbuff[i] = NULL; - tp->tx_ring[i].status = 0; - tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]); - if (tp->chip_id == X3201_3) - tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ); - } - tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]); -} - - -static int -xircom_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int entry; - u32 flag; - - /* Caution: the write order is important here, set the base address - with the "ownership" bits last. */ - - /* Calculate the next Tx descriptor entry. */ - entry = tp->cur_tx % TX_RING_SIZE; - - tp->tx_skbuff[entry] = skb; - if (tp->chip_id == X3201_3) { - skb_copy_from_linear_data(skb, - tp->tx_aligned_skbuff[entry]->data, - skb->len); - tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data); - } else - tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data); - - if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ - flag = Tx1WholePkt; /* No interrupt */ - } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) { - flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */ - } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) { - flag = Tx1WholePkt; /* No Tx-done intr. */ - } else { - /* Leave room for set_rx_mode() to fill entries. */ - flag = Tx1WholePkt | Tx1ComplIntr; /* Tx-done intr. */ - tp->tx_full = 1; - } - if (entry == TX_RING_SIZE - 1) - flag |= Tx1WholePkt | Tx1ComplIntr | Tx1RingWrap; - - tp->tx_ring[entry].length = skb->len | flag; - tp->tx_ring[entry].status = Tx0DescOwned; /* Pass ownership to the chip. */ - tp->cur_tx++; - if (tp->tx_full) - netif_stop_queue (dev); - else - netif_wake_queue (dev); - - /* Trigger an immediate transmit demand. */ - outl(0, dev->base_addr + CSR1); - - dev->trans_start = jiffies; - - return 0; -} - - -static void xircom_media_change(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - u16 reg0, reg1, reg4, reg5; - u32 csr6 = inl(ioaddr + CSR6), newcsr6; - - /* reset status first */ - mdio_read(dev, tp->phys[0], MII_BMCR); - mdio_read(dev, tp->phys[0], MII_BMSR); - - reg0 = mdio_read(dev, tp->phys[0], MII_BMCR); - reg1 = mdio_read(dev, tp->phys[0], MII_BMSR); - - if (reg1 & BMSR_LSTATUS) { - /* link is up */ - if (reg0 & BMCR_ANENABLE) { - /* autonegotiation is enabled */ - reg4 = mdio_read(dev, tp->phys[0], MII_ADVERTISE); - reg5 = mdio_read(dev, tp->phys[0], MII_LPA); - if (reg4 & ADVERTISE_100FULL && reg5 & LPA_100FULL) { - tp->speed100 = 1; - tp->full_duplex = 1; - } else if (reg4 & ADVERTISE_100HALF && reg5 & LPA_100HALF) { - tp->speed100 = 1; - tp->full_duplex = 0; - } else if (reg4 & ADVERTISE_10FULL && reg5 & LPA_10FULL) { - tp->speed100 = 0; - tp->full_duplex = 1; - } else { - tp->speed100 = 0; - tp->full_duplex = 0; - } - } else { - /* autonegotiation is disabled */ - if (reg0 & BMCR_SPEED100) - tp->speed100 = 1; - else - tp->speed100 = 0; - if (reg0 & BMCR_FULLDPLX) - tp->full_duplex = 1; - else - tp->full_duplex = 0; - } - printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n", - dev->name, - tp->speed100 ? "100" : "10", - tp->full_duplex ? "full" : "half"); - netif_carrier_on(dev); - newcsr6 = csr6 & ~FullDuplexBit; - if (tp->full_duplex) - newcsr6 |= FullDuplexBit; - if (newcsr6 != csr6) - outl_CSR6(newcsr6, ioaddr + CSR6); - } else { - printk(KERN_DEBUG "%s: Link is down\n", dev->name); - netif_carrier_off(dev); - } -} - - -static void check_duplex(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 reg0; - - mdio_write(dev, tp->phys[0], MII_BMCR, BMCR_RESET); - udelay(500); - while (mdio_read(dev, tp->phys[0], MII_BMCR) & BMCR_RESET); - - reg0 = mdio_read(dev, tp->phys[0], MII_BMCR); - mdio_write(dev, tp->phys[0], MII_ADVERTISE, tp->advertising[0]); - - if (tp->autoneg) { - reg0 &= ~(BMCR_SPEED100 | BMCR_FULLDPLX); - reg0 |= BMCR_ANENABLE | BMCR_ANRESTART; - } else { - reg0 &= ~(BMCR_ANENABLE | BMCR_ANRESTART); - if (tp->speed100) - reg0 |= BMCR_SPEED100; - if (tp->full_duplex) - reg0 |= BMCR_FULLDPLX; - printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n", - dev->name, - tp->speed100 ? "100" : "10", - tp->full_duplex ? "full" : "half"); - } - mdio_write(dev, tp->phys[0], MII_BMCR, reg0); -} - - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t xircom_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - int csr5, work_budget = max_interrupt_work; - int handled = 0; - - spin_lock (&tp->lock); - - do { - csr5 = inl(ioaddr + CSR5); - /* Acknowledge all of the current interrupt sources ASAP. */ - outl(csr5 & 0x0001ffff, ioaddr + CSR5); - - if (xircom_debug > 4) - printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n", - dev->name, csr5, inl(dev->base_addr + CSR5)); - - if (csr5 == 0xffffffff) - break; /* all bits set, assume PCMCIA card removed */ - - if ((csr5 & (NormalIntr|AbnormalIntr)) == 0) - break; - - handled = 1; - - if (csr5 & (RxIntr | RxNoBuf)) - work_budget -= xircom_rx(dev); - - if (csr5 & (TxNoBuf | TxDied | TxIntr)) { - unsigned int dirty_tx; - - for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0; - dirty_tx++) { - int entry = dirty_tx % TX_RING_SIZE; - int status = tp->tx_ring[entry].status; - - if (status < 0) - break; /* It still hasn't been Txed */ - /* Check for Rx filter setup frames. */ - if (tp->tx_skbuff[entry] == NULL) - continue; - - if (status & Tx0DescError) { - /* There was an major error, log it. */ -#ifndef final_version - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n", - dev->name, status); -#endif - tp->stats.tx_errors++; - if (status & Tx0ManyColl) { - tp->stats.tx_aborted_errors++; - } - if (status & Tx0NoCarrier) tp->stats.tx_carrier_errors++; - if (status & Tx0LateColl) tp->stats.tx_window_errors++; - if (status & Tx0Underflow) tp->stats.tx_fifo_errors++; - } else { - tp->stats.tx_bytes += tp->tx_ring[entry].length & 0x7ff; - tp->stats.collisions += (status >> 3) & 15; - tp->stats.tx_packets++; - } - - /* Free the original skb. */ - dev_kfree_skb_irq(tp->tx_skbuff[entry]); - tp->tx_skbuff[entry] = NULL; - } - -#ifndef final_version - if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { - printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n", - dev->name, dirty_tx, tp->cur_tx, tp->tx_full); - dirty_tx += TX_RING_SIZE; - } -#endif - - if (tp->tx_full && - tp->cur_tx - dirty_tx < TX_RING_SIZE - 2) - /* The ring is no longer full */ - tp->tx_full = 0; - - if (tp->tx_full) - netif_stop_queue (dev); - else - netif_wake_queue (dev); - - tp->dirty_tx = dirty_tx; - if (csr5 & TxDied) { - if (xircom_debug > 2) - printk(KERN_WARNING "%s: The transmitter stopped." - " CSR5 is %x, CSR6 %x, new CSR6 %x.\n", - dev->name, csr5, inl(ioaddr + CSR6), tp->csr6); - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - } - - /* Log errors. */ - if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */ - if (csr5 & LinkChange) - xircom_media_change(dev); - if (csr5 & TxFIFOUnderflow) { - if ((tp->csr6 & TxThreshMask) != TxThreshMask) - tp->csr6 += (1 << TxThreshShift); /* Bump up the Tx threshold */ - else - tp->csr6 |= TxStoreForw; /* Store-n-forward. */ - /* Restart the transmit process. */ - outl_CSR6(tp->csr6 | EnableRx, ioaddr); - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - if (csr5 & RxDied) { /* Missed a Rx frame. */ - tp->stats.rx_errors++; - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - outl_CSR6(tp->csr6 | EnableTxRx, ioaddr); - } - /* Clear all error sources, included undocumented ones! */ - outl(0x0800f7ba, ioaddr + CSR5); - } - if (--work_budget < 0) { - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Too much work during an interrupt, " - "csr5=0x%8.8x.\n", dev->name, csr5); - /* Acknowledge all interrupt sources. */ - outl(0x8001ffff, ioaddr + CSR5); - break; - } - } while (1); - - if (xircom_debug > 3) - printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n", - dev->name, inl(ioaddr + CSR5)); - - spin_unlock (&tp->lock); - return IRQ_RETVAL(handled); -} - - -static int -xircom_rx(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - int entry = tp->cur_rx % RX_RING_SIZE; - int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx; - int work_done = 0; - - if (xircom_debug > 4) - printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); - /* If we own the next entry, it's a new packet. Send it up. */ - while (tp->rx_ring[entry].status >= 0) { - s32 status = tp->rx_ring[entry].status; - - if (xircom_debug > 5) - printk(KERN_DEBUG " In xircom_rx(), entry %d %8.8x.\n", entry, - tp->rx_ring[entry].status); - if (--rx_work_limit < 0) - break; - if ((status & 0x38008300) != 0x0300) { - if ((status & 0x38000300) != 0x0300) { - /* Ignore earlier buffers. */ - if ((status & 0xffff) != 0x7fff) { - if (xircom_debug > 1) - printk(KERN_WARNING "%s: Oversized Ethernet frame " - "spanned multiple buffers, status %8.8x!\n", - dev->name, status); - tp->stats.rx_length_errors++; - } - } else if (status & Rx0DescError) { - /* There was a fatal error. */ - if (xircom_debug > 2) - printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n", - dev->name, status); - tp->stats.rx_errors++; /* end of a packet.*/ - if (status & (Rx0Runt | Rx0HugeFrame)) tp->stats.rx_length_errors++; - if (status & Rx0CRCError) tp->stats.rx_crc_errors++; - } - } else { - /* Omit the four octet CRC from the length. */ - short pkt_len = ((status >> 16) & 0x7ff) - 4; - struct sk_buff *skb; - -#ifndef final_version - if (pkt_len > 1518) { - printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n", - dev->name, pkt_len, pkt_len); - pkt_len = 1518; - tp->stats.rx_length_errors++; - } -#endif - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak - && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ -#if ! defined(__alpha__) - skb_copy_to_linear_data(skb, bus_to_virt(tp->rx_ring[entry].buffer1), - pkt_len); - skb_put(skb, pkt_len); -#else - memcpy(skb_put(skb, pkt_len), - bus_to_virt(tp->rx_ring[entry].buffer1), pkt_len); -#endif - work_done++; - } else { /* Pass up the skb already on the Rx ring. */ - skb_put(skb = tp->rx_skbuff[entry], pkt_len); - tp->rx_skbuff[entry] = NULL; - } - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - tp->stats.rx_packets++; - tp->stats.rx_bytes += pkt_len; - } - entry = (++tp->cur_rx) % RX_RING_SIZE; - } - - /* Refill the Rx ring buffers. */ - for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) { - entry = tp->dirty_rx % RX_RING_SIZE; - if (tp->rx_skbuff[entry] == NULL) { - struct sk_buff *skb; - skb = tp->rx_skbuff[entry] = dev_alloc_skb(PKT_BUF_SZ); - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - tp->rx_ring[entry].buffer1 = virt_to_bus(skb->data); - work_done++; - } - tp->rx_ring[entry].status = Rx0DescOwned; - } - - return work_done; -} - - -static void -xircom_down(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct xircom_private *tp = netdev_priv(dev); - - /* Disable interrupts by clearing the interrupt mask. */ - outl(0, ioaddr + CSR7); - /* Stop the chip's Tx and Rx processes. */ - outl_CSR6(inl(ioaddr + CSR6) & ~EnableTxRx, ioaddr); - - if (inl(ioaddr + CSR6) != 0xffffffff) - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - - dev->if_port = tp->saved_if_port; -} - - -static int -xircom_close(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct xircom_private *tp = netdev_priv(dev); - int i; - - if (xircom_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, inl(ioaddr + CSR5)); - - netif_stop_queue(dev); - - if (netif_device_present(dev)) - xircom_down(dev); - - free_irq(dev->irq, dev); - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = tp->rx_skbuff[i]; - tp->rx_skbuff[i] = NULL; - tp->rx_ring[i].status = 0; /* Not owned by Xircom chip. */ - tp->rx_ring[i].length = 0; - tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */ - if (skb) { - dev_kfree_skb(skb); - } - } - for (i = 0; i < TX_RING_SIZE; i++) { - if (tp->tx_skbuff[i]) - dev_kfree_skb(tp->tx_skbuff[i]); - tp->tx_skbuff[i] = NULL; - } - - tp->open = 0; - return 0; -} - - -static struct net_device_stats *xircom_get_stats(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - long ioaddr = dev->base_addr; - - if (netif_device_present(dev)) - tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff; - - return &tp->stats; -} - -static int xircom_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct xircom_private *tp = netdev_priv(dev); - ecmd->supported = - SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII; - - ecmd->advertising = ADVERTISED_MII; - if (tp->advertising[0] & ADVERTISE_10HALF) - ecmd->advertising |= ADVERTISED_10baseT_Half; - if (tp->advertising[0] & ADVERTISE_10FULL) - ecmd->advertising |= ADVERTISED_10baseT_Full; - if (tp->advertising[0] & ADVERTISE_100HALF) - ecmd->advertising |= ADVERTISED_100baseT_Half; - if (tp->advertising[0] & ADVERTISE_100FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - if (tp->autoneg) { - ecmd->advertising |= ADVERTISED_Autoneg; - ecmd->autoneg = AUTONEG_ENABLE; - } else - ecmd->autoneg = AUTONEG_DISABLE; - - ecmd->port = PORT_MII; - ecmd->transceiver = XCVR_INTERNAL; - ecmd->phy_address = tp->phys[0]; - ecmd->speed = tp->speed100 ? SPEED_100 : SPEED_10; - ecmd->duplex = tp->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - ecmd->maxtxpkt = TX_RING_SIZE / 2; - ecmd->maxrxpkt = 0; - return 0; -} - -static int xircom_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 autoneg, speed100, full_duplex; - - autoneg = (ecmd->autoneg == AUTONEG_ENABLE); - speed100 = (ecmd->speed == SPEED_100); - full_duplex = (ecmd->duplex == DUPLEX_FULL); - - tp->autoneg = autoneg; - if (speed100 != tp->speed100 || - full_duplex != tp->full_duplex) { - tp->speed100 = speed100; - tp->full_duplex = full_duplex; - /* change advertising bits */ - tp->advertising[0] &= ~(ADVERTISE_10HALF | - ADVERTISE_10FULL | - ADVERTISE_100HALF | - ADVERTISE_100FULL | - ADVERTISE_100BASE4); - if (speed100) { - if (full_duplex) - tp->advertising[0] |= ADVERTISE_100FULL; - else - tp->advertising[0] |= ADVERTISE_100HALF; - } else { - if (full_duplex) - tp->advertising[0] |= ADVERTISE_10FULL; - else - tp->advertising[0] |= ADVERTISE_10HALF; - } - } - check_duplex(dev); - return 0; -} - -static void xircom_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct xircom_private *tp = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(tp->pdev)); -} - -static const struct ethtool_ops ops = { - .get_settings = xircom_get_settings, - .set_settings = xircom_set_settings, - .get_drvinfo = xircom_get_drvinfo, -}; - -/* Provide ioctl() calls to examine the MII xcvr state. */ -static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct xircom_private *tp = netdev_priv(dev); - u16 *data = (u16 *)&rq->ifr_ifru; - int phy = tp->phys[0] & 0x1f; - unsigned long flags; - - switch(cmd) { - /* Legacy mii-diag interface */ - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - if (tp->mii_cnt) - data[0] = phy; - else - return -ENODEV; - return 0; - case SIOCGMIIREG: /* Read MII PHY register. */ - save_flags(flags); - cli(); - data[3] = mdio_read(dev, data[0] & 0x1f, data[1] & 0x1f); - restore_flags(flags); - return 0; - case SIOCSMIIREG: /* Write MII PHY register. */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - save_flags(flags); - cli(); - if (data[0] == tp->phys[0]) { - u16 value = data[2]; - switch (data[1]) { - case 0: - if (value & (BMCR_RESET | BMCR_ANENABLE)) - /* Autonegotiation. */ - tp->autoneg = 1; - else { - tp->full_duplex = (value & BMCR_FULLDPLX) ? 1 : 0; - tp->autoneg = 0; - } - break; - case 4: - tp->advertising[0] = value; - break; - } - check_duplex(dev); - } - mdio_write(dev, data[0] & 0x1f, data[1] & 0x1f, data[2]); - restore_flags(flags); - return 0; - default: - return -EOPNOTSUPP; - } - - return -EOPNOTSUPP; -} - -/* Set or clear the multicast filter for this adaptor. - Note that we only use exclusion around actually queueing the - new frame, not around filling tp->setup_frame. This is non-deterministic - when re-entered but still correct. */ -static void set_rx_mode(struct net_device *dev) -{ - struct xircom_private *tp = netdev_priv(dev); - struct dev_mc_list *mclist; - long ioaddr = dev->base_addr; - int csr6 = inl(ioaddr + CSR6); - u16 *eaddrs, *setup_frm; - u32 tx_flags; - int i; - - tp->csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit); - csr6 &= ~(AllMultiBit | PromiscBit | HashFilterBit); - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - tp->csr6 |= PromiscBit; - csr6 |= PromiscBit; - goto out; - } - - if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter well -- accept all multicasts. */ - tp->csr6 |= AllMultiBit; - csr6 |= AllMultiBit; - goto out; - } - - tx_flags = Tx1WholePkt | Tx1SetupPkt | PKT_SETUP_SZ; - - /* Note that only the low-address shortword of setup_frame is valid! */ - setup_frm = tp->setup_frame; - mclist = dev->mc_list; - - /* Fill the first entry with our physical address. */ - eaddrs = (u16 *)dev->dev_addr; - *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2; - - if (dev->mc_count > 14) { /* Must use a multicast hash table. */ - u32 *hash_table = (u32 *)(tp->setup_frame + 4 * 12); - u32 hash, hash2; - - tx_flags |= Tx1HashSetup; - tp->csr6 |= HashFilterBit; - csr6 |= HashFilterBit; - - /* Fill the unused 3 entries with the broadcast address. - At least one entry *must* contain the broadcast address!!!*/ - for (i = 0; i < 3; i++) { - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - } - - /* Truly brain-damaged hash filter layout */ - /* XXX: not sure if I should take the last or the first 9 bits */ - for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) { - u32 *hptr; - hash = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x1ff; - if (hash < 384) { - hash2 = hash + ((hash >> 4) << 4) + - ((hash >> 5) << 5); - } else { - hash -= 384; - hash2 = 64 + hash + (hash >> 4) * 80; - } - hptr = &hash_table[hash2 & ~0x1f]; - *hptr |= cpu_to_le32(1 << (hash2 & 0x1f)); - } - } else { - /* We have <= 14 mcast addresses so we can use Xircom's - wonderful 16-address perfect filter. */ - for (i = 0; i < dev->mc_count; i++, mclist = mclist->next) { - eaddrs = (u16 *)mclist->dmi_addr; - *setup_frm = cpu_to_le16(eaddrs[0]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[1]); setup_frm += 2; - *setup_frm = cpu_to_le16(eaddrs[2]); setup_frm += 2; - } - /* Fill the unused entries with the broadcast address. - At least one entry *must* contain the broadcast address!!!*/ - for (; i < 15; i++) { - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - *setup_frm = 0xffff; setup_frm += 2; - } - } - - /* Now add this frame to the Tx list. */ - if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) { - /* Same setup recently queued, we need not add it. */ - /* XXX: Huh? All it means is that the Tx list is full...*/ - } else { - unsigned long flags; - unsigned int entry; - int dummy = -1; - - save_flags(flags); cli(); - entry = tp->cur_tx++ % TX_RING_SIZE; - - if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. */ - tp->tx_skbuff[entry] = NULL; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE - 1) ? Tx1RingWrap : 0; - tp->tx_ring[entry].buffer1 = 0; - /* race with chip, set Tx0DescOwned later */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } - - tp->tx_skbuff[entry] = NULL; - /* Put the setup frame on the Tx list. */ - if (entry == TX_RING_SIZE - 1) - tx_flags |= Tx1RingWrap; /* Wrap ring. */ - tp->tx_ring[entry].length = tx_flags; - tp->tx_ring[entry].buffer1 = virt_to_bus(tp->setup_frame); - tp->tx_ring[entry].status = Tx0DescOwned; - if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) { - tp->tx_full = 1; - netif_stop_queue (dev); - } - if (dummy >= 0) - tp->tx_ring[dummy].status = Tx0DescOwned; - restore_flags(flags); - /* Trigger an immediate transmit demand. */ - outl(0, ioaddr + CSR1); - } - -out: - outl_CSR6(csr6, ioaddr); -} - - -static struct pci_device_id xircom_pci_table[] = { - { 0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, X3201_3 }, - {0}, -}; -MODULE_DEVICE_TABLE(pci, xircom_pci_table); - - -#ifdef CONFIG_PM -static int xircom_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xircom_private *tp = netdev_priv(dev); - printk(KERN_INFO "xircom_suspend(%s)\n", dev->name); - if (tp->open) - xircom_down(dev); - - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, 3); - - return 0; -} - - -static int xircom_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xircom_private *tp = netdev_priv(dev); - printk(KERN_INFO "xircom_resume(%s)\n", dev->name); - - pci_set_power_state(pdev,0); - pci_enable_device(pdev); - pci_restore_state(pdev); - - /* Bring the chip out of sleep mode. - Caution: Snooze mode does not work with some boards! */ - if (xircom_tbl[tp->chip_id].flags & HAS_ACPI) - pci_write_config_dword(tp->pdev, PCI_POWERMGMT, 0); - - transceiver_voodoo(dev); - if (xircom_tbl[tp->chip_id].flags & HAS_MII) - check_duplex(dev); - - if (tp->open) - xircom_up(dev); - return 0; -} -#endif /* CONFIG_PM */ - - -static void __devexit xircom_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - printk(KERN_INFO "xircom_remove_one(%s)\n", dev->name); - unregister_netdev(dev); - pci_release_regions(pdev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); -} - - -static struct pci_driver xircom_driver = { - .name = DRV_NAME, - .id_table = xircom_pci_table, - .probe = xircom_init_one, - .remove = __devexit_p(xircom_remove_one), -#ifdef CONFIG_PM - .suspend = xircom_suspend, - .resume = xircom_resume -#endif /* CONFIG_PM */ -}; - - -static int __init xircom_init(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - return pci_register_driver(&xircom_driver); -} - - -static void __exit xircom_exit(void) -{ - pci_unregister_driver(&xircom_driver); -} - -module_init(xircom_init) -module_exit(xircom_exit) - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ -- cgit v1.1 From 2e5071bce5ce4037ce852a916e8106811e68677b Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:03 -0600 Subject: atl1: relocate atl1 driver to /drivers/net/atlx In preparation for a future Atheros L2 NIC driver (called atl2), relocate the atl1 driver into a new /drivers/net/atlx directory that will ultimately be shared with the future atl2 driver. Signed-off-by: Chris Snook Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/Makefile | 2 +- drivers/net/atl1/Makefile | 2 - drivers/net/atl1/atl1.h | 286 ----- drivers/net/atl1/atl1_ethtool.c | 505 -------- drivers/net/atl1/atl1_hw.c | 720 ------------ drivers/net/atl1/atl1_hw.h | 946 --------------- drivers/net/atl1/atl1_main.c | 2453 --------------------------------------- drivers/net/atl1/atl1_param.c | 203 ---- drivers/net/atlx/Makefile | 2 + drivers/net/atlx/atl1.h | 286 +++++ drivers/net/atlx/atl1_ethtool.c | 505 ++++++++ drivers/net/atlx/atl1_hw.c | 720 ++++++++++++ drivers/net/atlx/atl1_hw.h | 946 +++++++++++++++ drivers/net/atlx/atl1_main.c | 2453 +++++++++++++++++++++++++++++++++++++++ drivers/net/atlx/atl1_param.c | 203 ++++ 15 files changed, 5116 insertions(+), 5116 deletions(-) delete mode 100644 drivers/net/atl1/Makefile delete mode 100644 drivers/net/atl1/atl1.h delete mode 100644 drivers/net/atl1/atl1_ethtool.c delete mode 100644 drivers/net/atl1/atl1_hw.c delete mode 100644 drivers/net/atl1/atl1_hw.h delete mode 100644 drivers/net/atl1/atl1_main.c delete mode 100644 drivers/net/atl1/atl1_param.c create mode 100644 drivers/net/atlx/Makefile create mode 100644 drivers/net/atlx/atl1.h create mode 100644 drivers/net/atlx/atl1_ethtool.c create mode 100644 drivers/net/atlx/atl1_hw.c create mode 100644 drivers/net/atlx/atl1_hw.h create mode 100644 drivers/net/atlx/atl1_main.c create mode 100644 drivers/net/atlx/atl1_param.c (limited to 'drivers') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b8756eb..960999c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_CHELSIO_T3) += cxgb3/ obj-$(CONFIG_EHEA) += ehea/ obj-$(CONFIG_CAN) += can/ obj-$(CONFIG_BONDING) += bonding/ -obj-$(CONFIG_ATL1) += atl1/ +obj-$(CONFIG_ATL1) += atlx/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o obj-$(CONFIG_TEHUTI) += tehuti.o diff --git a/drivers/net/atl1/Makefile b/drivers/net/atl1/Makefile deleted file mode 100644 index a6b707e..0000000 --- a/drivers/net/atl1/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_ATL1) += atl1.o -atl1-y += atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h deleted file mode 100644 index ff4765f6..0000000 --- a/drivers/net/atl1/atl1.h +++ /dev/null @@ -1,286 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _ATL1_H_ -#define _ATL1_H_ - -#include -#include - -#include "atl1_hw.h" - -/* function prototypes needed by multiple files */ -s32 atl1_up(struct atl1_adapter *adapter); -void atl1_down(struct atl1_adapter *adapter); -int atl1_reset(struct atl1_adapter *adapter); -s32 atl1_setup_ring_resources(struct atl1_adapter *adapter); -void atl1_free_ring_resources(struct atl1_adapter *adapter); - -extern char atl1_driver_name[]; -extern char atl1_driver_version[]; -extern const struct ethtool_ops atl1_ethtool_ops; - -struct atl1_adapter; - -#define ATL1_MAX_INTR 3 -#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */ - -#define ATL1_DEFAULT_TPD 256 -#define ATL1_MAX_TPD 1024 -#define ATL1_MIN_TPD 64 -#define ATL1_DEFAULT_RFD 512 -#define ATL1_MIN_RFD 128 -#define ATL1_MAX_RFD 2048 - -#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) -#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc) -#define ATL1_TPD_DESC(R, i) ATL1_GET_DESC(R, i, struct tx_packet_desc) -#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc) - -/* - * This detached comment is preserved for documentation purposes only. - * It was originally attached to some code that got deleted, but seems - * important enough to keep around... - * - * - * Some workarounds require millisecond delays and are run during interrupt - * context. Most notably, when establishing link, the phy may need tweaking - * but cannot process phy register reads/writes faster than millisecond - * intervals...and we establish link due to a "link status change" interrupt. - * - */ - -/* - * atl1_ring_header represents a single, contiguous block of DMA space - * mapped for the three descriptor rings (tpd, rfd, rrd) and the two - * message blocks (cmb, smb) described below - */ -struct atl1_ring_header { - void *desc; /* virtual address */ - dma_addr_t dma; /* physical address*/ - unsigned int size; /* length in bytes */ -}; - -/* - * atl1_buffer is wrapper around a pointer to a socket buffer - * so a DMA handle can be stored along with the skb - */ -struct atl1_buffer { - struct sk_buff *skb; /* socket buffer */ - u16 length; /* rx buffer length */ - u16 alloced; /* 1 if skb allocated */ - dma_addr_t dma; -}; - -/* transmit packet descriptor (tpd) ring */ -struct atl1_tpd_ring { - void *desc; /* descriptor ring virtual address */ - dma_addr_t dma; /* descriptor ring physical address */ - u16 size; /* descriptor ring length in bytes */ - u16 count; /* number of descriptors in the ring */ - u16 hw_idx; /* hardware index */ - atomic_t next_to_clean; - atomic_t next_to_use; - struct atl1_buffer *buffer_info; -}; - -/* receive free descriptor (rfd) ring */ -struct atl1_rfd_ring { - void *desc; /* descriptor ring virtual address */ - dma_addr_t dma; /* descriptor ring physical address */ - u16 size; /* descriptor ring length in bytes */ - u16 count; /* number of descriptors in the ring */ - atomic_t next_to_use; - u16 next_to_clean; - struct atl1_buffer *buffer_info; -}; - -/* receive return descriptor (rrd) ring */ -struct atl1_rrd_ring { - void *desc; /* descriptor ring virtual address */ - dma_addr_t dma; /* descriptor ring physical address */ - unsigned int size; /* descriptor ring length in bytes */ - u16 count; /* number of descriptors in the ring */ - u16 next_to_use; - atomic_t next_to_clean; -}; - -/* coalescing message block (cmb) */ -struct atl1_cmb { - struct coals_msg_block *cmb; - dma_addr_t dma; -}; - -/* statistics message block (smb) */ -struct atl1_smb { - struct stats_msg_block *smb; - dma_addr_t dma; -}; - -/* Statistics counters */ -struct atl1_sft_stats { - u64 rx_packets; - u64 tx_packets; - u64 rx_bytes; - u64 tx_bytes; - u64 multicast; - u64 collisions; - u64 rx_errors; - u64 rx_length_errors; - u64 rx_crc_errors; - u64 rx_frame_errors; - u64 rx_fifo_errors; - u64 rx_missed_errors; - u64 tx_errors; - u64 tx_fifo_errors; - u64 tx_aborted_errors; - u64 tx_window_errors; - u64 tx_carrier_errors; - u64 tx_pause; /* num pause packets transmitted. */ - u64 excecol; /* num tx packets w/ excessive collisions. */ - u64 deffer; /* num tx packets deferred */ - u64 scc; /* num packets subsequently transmitted - * successfully w/ single prior collision. */ - u64 mcc; /* num packets subsequently transmitted - * successfully w/ multiple prior collisions. */ - u64 latecol; /* num tx packets w/ late collisions. */ - u64 tx_underun; /* num tx packets aborted due to transmit - * FIFO underrun, or TRD FIFO underrun */ - u64 tx_trunc; /* num tx packets truncated due to size - * exceeding MTU, regardless whether truncated - * by the chip or not. (The name doesn't really - * reflect the meaning in this case.) */ - u64 rx_pause; /* num Pause packets received. */ - u64 rx_rrd_ov; - u64 rx_trunc; -}; - -/* hardware structure */ -struct atl1_hw { - u8 __iomem *hw_addr; - struct atl1_adapter *back; - enum atl1_dma_order dma_ord; - enum atl1_dma_rcb rcb_value; - enum atl1_dma_req_block dmar_block; - enum atl1_dma_req_block dmaw_block; - u8 preamble_len; - u8 max_retry; /* Retransmission maximum, after which the - * packet will be discarded */ - u8 jam_ipg; /* IPG to start JAM for collision based flow - * control in half-duplex mode. In units of - * 8-bit time */ - u8 ipgt; /* Desired back to back inter-packet gap. - * The default is 96-bit time */ - u8 min_ifg; /* Minimum number of IFG to enforce in between - * receive frames. Frame gap below such IFP - * is dropped */ - u8 ipgr1; /* 64bit Carrier-Sense window */ - u8 ipgr2; /* 96-bit IPG window */ - u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned - * burst. Each TPD is 16 bytes long */ - u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned - * burst. Each RFD is 12 bytes long */ - u8 rfd_fetch_gap; - u8 rrd_burst; /* Threshold number of RRDs that can be retired - * in a burst. Each RRD is 16 bytes long */ - u8 tpd_fetch_th; - u8 tpd_fetch_gap; - u16 tx_jumbo_task_th; - u16 txf_burst; /* Number of data bytes to read in a cache- - * aligned burst. Each SRAM entry is 8 bytes */ - u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN - * packets should add 4 bytes */ - u16 rx_jumbo_lkah; - u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after - * every 512ns passes. */ - u16 lcol; /* Collision Window */ - - u16 cmb_tpd; - u16 cmb_rrd; - u16 cmb_rx_timer; - u16 cmb_tx_timer; - u32 smb_timer; - u16 media_type; - u16 autoneg_advertised; - - u16 mii_autoneg_adv_reg; - u16 mii_1000t_ctrl_reg; - - u32 max_frame_size; - u32 min_frame_size; - - u16 dev_rev; - - /* spi flash */ - u8 flash_vendor; - - u8 mac_addr[ETH_ALEN]; - u8 perm_mac_addr[ETH_ALEN]; - - bool phy_configured; -}; - -struct atl1_adapter { - struct net_device *netdev; - struct pci_dev *pdev; - struct net_device_stats net_stats; - struct atl1_sft_stats soft_stats; - struct vlan_group *vlgrp; - u32 rx_buffer_len; - u32 wol; - u16 link_speed; - u16 link_duplex; - spinlock_t lock; - struct work_struct tx_timeout_task; - struct work_struct link_chg_task; - struct work_struct pcie_dma_to_rst_task; - struct timer_list watchdog_timer; - struct timer_list phy_config_timer; - bool phy_timer_pending; - - /* all descriptor rings' memory */ - struct atl1_ring_header ring_header; - - /* TX */ - struct atl1_tpd_ring tpd_ring; - spinlock_t mb_lock; - - /* RX */ - struct atl1_rfd_ring rfd_ring; - struct atl1_rrd_ring rrd_ring; - u64 hw_csum_err; - u64 hw_csum_good; - - u16 imt; /* interrupt moderator timer (2us resolution */ - u16 ict; /* interrupt clear timer (2us resolution */ - struct mii_if_info mii; /* MII interface info */ - - /* structs defined in atl1_hw.h */ - u32 bd_number; /* board number */ - bool pci_using_64; - struct atl1_hw hw; - struct atl1_smb smb; - struct atl1_cmb cmb; -}; - -#endif /* _ATL1_H_ */ diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c deleted file mode 100644 index 68a83be..0000000 --- a/drivers/net/atl1/atl1_ethtool.c +++ /dev/null @@ -1,505 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include "atl1.h" - -struct atl1_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; -}; - -#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \ - offsetof(struct atl1_adapter, m) - -static struct atl1_stats atl1_gstrings_stats[] = { - {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, - {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, - {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, - {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, - {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, - {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, - {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, - {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, - {"multicast", ATL1_STAT(soft_stats.multicast)}, - {"collisions", ATL1_STAT(soft_stats.collisions)}, - {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, - {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, - {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, - {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, - {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, - {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, - {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, - {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, - {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, - {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, - {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, - {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, - {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, - {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, - {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, - {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, - {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, - {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, - {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} -}; - -static void atl1_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int i; - char *p; - - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; - data[i] = (atl1_gstrings_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - -} - -static int atl1_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(atl1_gstrings_stats); - default: - return -EOPNOTSUPP; - } -} - -static int atl1_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | SUPPORTED_TP); - ecmd->advertising = ADVERTISED_TP; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - ecmd->advertising |= ADVERTISED_Autoneg; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { - ecmd->advertising |= ADVERTISED_Autoneg; - ecmd->advertising |= - (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full); - } - else - ecmd->advertising |= (ADVERTISED_1000baseT_Full); - } - ecmd->port = PORT_TP; - ecmd->phy_address = 0; - ecmd->transceiver = XCVR_INTERNAL; - - if (netif_carrier_ok(adapter->netdev)) { - u16 link_speed, link_duplex; - atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); - ecmd->speed = link_speed; - if (link_duplex == FULL_DUPLEX) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - } else { - ecmd->speed = -1; - ecmd->duplex = -1; - } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - ecmd->autoneg = AUTONEG_ENABLE; - else - ecmd->autoneg = AUTONEG_DISABLE; - - return 0; -} - -static int atl1_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u16 phy_data; - int ret_val = 0; - u16 old_media_type = hw->media_type; - - if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); - atl1_down(adapter); - } - - if (ecmd->autoneg == AUTONEG_ENABLE) - hw->media_type = MEDIA_TYPE_AUTO_SENSOR; - else { - if (ecmd->speed == SPEED_1000) { - if (ecmd->duplex != DUPLEX_FULL) { - dev_warn(&adapter->pdev->dev, - "can't force to 1000M half duplex\n"); - ret_val = -EINVAL; - goto exit_sset; - } - hw->media_type = MEDIA_TYPE_1000M_FULL; - } else if (ecmd->speed == SPEED_100) { - if (ecmd->duplex == DUPLEX_FULL) { - hw->media_type = MEDIA_TYPE_100M_FULL; - } else - hw->media_type = MEDIA_TYPE_100M_HALF; - } else { - if (ecmd->duplex == DUPLEX_FULL) - hw->media_type = MEDIA_TYPE_10M_FULL; - else - hw->media_type = MEDIA_TYPE_10M_HALF; - } - } - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - ecmd->advertising = - ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - case MEDIA_TYPE_1000M_FULL: - ecmd->advertising = - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - default: - ecmd->advertising = 0; - break; - } - if (atl1_phy_setup_autoneg_adv(hw)) { - ret_val = -EINVAL; - dev_warn(&adapter->pdev->dev, - "invalid ethtool speed/duplex setting\n"); - goto exit_sset; - } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); -exit_sset: - if (ret_val) - hw->media_type = old_media_type; - - if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); - atl1_up(adapter); - } else if (!ret_val) { - dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); - atl1_reset(adapter); - } - return ret_val; -} - -static void atl1_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - strncpy(drvinfo->driver, atl1_driver_name, sizeof(drvinfo->driver)); - strncpy(drvinfo->version, atl1_driver_version, - sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); - drvinfo->eedump_len = ATL1_EEDUMP_LEN; -} - -static void atl1_get_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; - if (adapter->wol & ATL1_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATL1_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATL1_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & ATL1_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; - return; -} - -static int atl1_set_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATL1_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATL1_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATL1_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= ATL1_WUFC_MAG; - return 0; -} - -static void atl1_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *txdr = &adapter->tpd_ring; - struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; - - ring->rx_max_pending = ATL1_MAX_RFD; - ring->tx_max_pending = ATL1_MAX_TPD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = rxdr->count; - ring->tx_pending = txdr->count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} - -static int atl1_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; - struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; - struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; - - struct atl1_tpd_ring tpd_old, tpd_new; - struct atl1_rfd_ring rfd_old, rfd_new; - struct atl1_rrd_ring rrd_old, rrd_new; - struct atl1_ring_header rhdr_old, rhdr_new; - int err; - - tpd_old = adapter->tpd_ring; - rfd_old = adapter->rfd_ring; - rrd_old = adapter->rrd_ring; - rhdr_old = adapter->ring_header; - - if (netif_running(adapter->netdev)) - atl1_down(adapter); - - rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); - rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : - rfdr->count; - rfdr->count = (rfdr->count + 3) & ~3; - rrdr->count = rfdr->count; - - tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); - tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : - tpdr->count; - tpdr->count = (tpdr->count + 3) & ~3; - - if (netif_running(adapter->netdev)) { - /* try to get new resources before deleting old */ - err = atl1_setup_ring_resources(adapter); - if (err) - goto err_setup_ring; - - /* - * save the new, restore the old in order to free it, - * then restore the new back again - */ - - rfd_new = adapter->rfd_ring; - rrd_new = adapter->rrd_ring; - tpd_new = adapter->tpd_ring; - rhdr_new = adapter->ring_header; - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; - atl1_free_ring_resources(adapter); - adapter->rfd_ring = rfd_new; - adapter->rrd_ring = rrd_new; - adapter->tpd_ring = tpd_new; - adapter->ring_header = rhdr_new; - - err = atl1_up(adapter); - if (err) - return err; - } - return 0; - -err_setup_ring: - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; - atl1_up(adapter); - return err; -} - -static void atl1_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; - } - epause->rx_pause = 1; - epause->tx_pause = 1; -} - -static int atl1_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; - } - - epause->rx_pause = 1; - epause->tx_pause = 1; - - return 0; -} - -static u32 atl1_get_rx_csum(struct net_device *netdev) -{ - return 1; -} - -static void atl1_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) -{ - u8 *p = data; - int i; - - switch (stringset) { - case ETH_SS_STATS: - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - memcpy(p, atl1_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - break; - } -} - -static int atl1_nway_reset(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (netif_running(netdev)) { - u16 phy_data; - atl1_down(adapter); - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - } else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - atl1_up(adapter); - } - return 0; -} - -const struct ethtool_ops atl1_ethtool_ops = { - .get_settings = atl1_get_settings, - .set_settings = atl1_set_settings, - .get_drvinfo = atl1_get_drvinfo, - .get_wol = atl1_get_wol, - .set_wol = atl1_set_wol, - .get_ringparam = atl1_get_ringparam, - .set_ringparam = atl1_set_ringparam, - .get_pauseparam = atl1_get_pauseparam, - .set_pauseparam = atl1_set_pauseparam, - .get_rx_csum = atl1_get_rx_csum, - .set_tx_csum = ethtool_op_set_tx_hw_csum, - .get_link = ethtool_op_get_link, - .set_sg = ethtool_op_set_sg, - .get_strings = atl1_get_strings, - .nway_reset = atl1_nway_reset, - .get_ethtool_stats = atl1_get_ethtool_stats, - .get_sset_count = atl1_get_sset_count, - .set_tso = ethtool_op_set_tso, -}; diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c deleted file mode 100644 index 9d3bd22..0000000 --- a/drivers/net/atl1/atl1_hw.c +++ /dev/null @@ -1,720 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "atl1.h" - -/* - * Reset the transmit and receive units; mask and clear all interrupts. - * hw - Struct containing variables accessed by shared code - * return : ATL1_SUCCESS or idle status (if error) - */ -s32 atl1_reset_hw(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - u32 icr; - int i; - - /* - * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events - */ - /* - * iowrite32(0, hw->hw_addr + REG_IMR); - * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); - */ - - /* - * Issue Soft Reset to the MAC. This will reset the chip's - * transmit, receive, DMA. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); - ioread32(hw->hw_addr + REG_MASTER_CTRL); - - iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE); - ioread16(hw->hw_addr + REG_GPHY_ENABLE); - - msleep(1); /* delay about 1ms */ - - /* Wait at least 10ms for All module to be Idle */ - for (i = 0; i < 10; i++) { - icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); - if (!icr) - break; - msleep(1); /* delay 1 ms */ - cpu_relax(); /* FIXME: is this still the right way to do this? */ - } - - if (icr) { - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); - return icr; - } - - return ATL1_SUCCESS; -} - -/* function about EEPROM - * - * check_eeprom_exist - * return 0 if eeprom exist - */ -static int atl1_check_eeprom_exist(struct atl1_hw *hw) -{ - u32 value; - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (value & SPI_FLASH_CTRL_EN_VPD) { - value &= ~SPI_FLASH_CTRL_EN_VPD; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - } - - value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); - return ((value & 0xFF00) == 0x6C00) ? 0 : 1; -} - -static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) -{ - int i; - u32 control; - - if (offset & 3) - return false; /* address do not align */ - - iowrite32(0, hw->hw_addr + REG_VPD_DATA); - control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; - iowrite32(control, hw->hw_addr + REG_VPD_CAP); - ioread32(hw->hw_addr + REG_VPD_CAP); - - for (i = 0; i < 10; i++) { - msleep(2); - control = ioread32(hw->hw_addr + REG_VPD_CAP); - if (control & VPD_CAP_VPD_FLAG) - break; - } - if (control & VPD_CAP_VPD_FLAG) { - *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); - return true; - } - return false; /* timeout */ -} - -/* - * Reads the value from a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to read - */ -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) -{ - u32 val; - int i; - - val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - if (!(val & (MDIO_START | MDIO_BUSY))) { - *phy_data = (u16) val; - return ATL1_SUCCESS; - } - return ATL1_ERR_PHY; -} - -#define CUSTOM_SPI_CS_SETUP 2 -#define CUSTOM_SPI_CLK_HI 2 -#define CUSTOM_SPI_CLK_LO 2 -#define CUSTOM_SPI_CS_HOLD 2 -#define CUSTOM_SPI_CS_HI 3 - -static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) -{ - int i; - u32 value; - - iowrite32(0, hw->hw_addr + REG_SPI_DATA); - iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); - - value = SPI_FLASH_CTRL_WAIT_READY | - (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << - SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & - SPI_FLASH_CTRL_CLK_HI_MASK) << - SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & - SPI_FLASH_CTRL_CLK_LO_MASK) << - SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & - SPI_FLASH_CTRL_CS_HOLD_MASK) << - SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & - SPI_FLASH_CTRL_CS_HI_MASK) << - SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << - SPI_FLASH_CTRL_INS_SHIFT; - - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - - value |= SPI_FLASH_CTRL_START; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - - for (i = 0; i < 10; i++) { - msleep(1); /* 1ms */ - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (!(value & SPI_FLASH_CTRL_START)) - break; - } - - if (value & SPI_FLASH_CTRL_START) - return false; - - *buf = ioread32(hw->hw_addr + REG_SPI_DATA); - - return true; -} - -/* - * get_permanent_address - * return 0 if get valid mac address, - */ -static int atl1_get_permanent_address(struct atl1_hw *hw) -{ - u32 addr[2]; - u32 i, control; - u16 reg; - u8 eth_addr[ETH_ALEN]; - bool key_valid; - - if (is_valid_ether_addr(hw->perm_mac_addr)) - return 0; - - /* init */ - addr[0] = addr[1] = 0; - - if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */ - reg = 0; - key_valid = false; - /* Read out all EEPROM content */ - i = 0; - while (1) { - if (atl1_read_eeprom(hw, i + 0x100, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* assume data end while encount an invalid KEYWORD */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - return 1; - } - - /* see if SPI FLAGS exist ? */ - addr[0] = addr[1] = 0; - reg = 0; - key_valid = false; - i = 0; - while (1) { - if (atl1_spi_read(hw, i + 0x1f000, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* data end */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - /* - * On some motherboards, the MAC address is written by the - * BIOS directly to the MAC register during POST, and is - * not stored in eeprom. If all else thus far has failed - * to fetch the permanent MAC address, try reading it directly. - */ - addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); - addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - return 1; -} - -/* - * Reads the adapter's MAC address from the EEPROM - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_read_mac_addr(struct atl1_hw *hw) -{ - u16 i; - - if (atl1_get_permanent_address(hw)) - random_ether_addr(hw->perm_mac_addr); - - for (i = 0; i < ETH_ALEN; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return ATL1_SUCCESS; -} - -/* - * Hashes an address to determine its location in the multicast table - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * atl1_hash_mc_addr - * purpose - * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB - */ -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) -{ - u32 crc32, value = 0; - int i; - - crc32 = ether_crc_le(6, mc_addr); - for (i = 0; i < 32; i++) - value |= (((crc32 >> i) & 1) << (31 - i)); - - return value; -} - -/* - * Sets the bit in the multicast table corresponding to the hash value. - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - */ -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) -{ - u32 hash_bit, hash_reg; - u32 mta; - - /* - * The HASH Table is a register array of 2 32-bit registers. - * It is treated like an array of 64 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 31) & 0x1; - hash_bit = (hash_value >> 26) & 0x1F; - mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); - mta |= (1 << hash_bit); - iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); -} - -/* - * Writes a value to a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to write - * data - data to write to the PHY - */ -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) -{ - int i; - u32 val; - - val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | - (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | - MDIO_SUP_PREAMBLE | - MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if (!(val & (MDIO_START | MDIO_BUSY))) - return ATL1_SUCCESS; - - return ATL1_ERR_PHY; -} - -/* - * Make L001's PHY out of Power Saving State (bug) - * hw - Struct containing variables accessed by shared code - * when power on, L001's PHY always on Power saving State - * (Gigabit Link forbidden) - */ -static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) -{ - s32 ret; - ret = atl1_write_phy_reg(hw, 29, 0x0029); - if (ret) - return ret; - return atl1_write_phy_reg(hw, 30, 0); -} - -/* - *TODO: do something or get rid of this - */ -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ -/* s32 ret_val; - * u16 phy_data; - */ - -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ - return ATL1_SUCCESS; -} - -/* - * Resets the PHY and make all config validate - * hw - Struct containing variables accessed by shared code - * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) - */ -static s32 atl1_phy_reset(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - - ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); - if (ret_val) { - u32 val; - int i; - /* pcie serdes link may be down! */ - dev_dbg(&pdev->dev, "pcie phy link down\n"); - - for (i = 0; i < 25; i++) { - msleep(1); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); - return ret_val; - } - } - return ATL1_SUCCESS; -} - -/* - * Configures PHY autoneg and flow control advertisement settings - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) -{ - s32 ret_val; - s16 mii_autoneg_adv_reg; - s16 mii_1000t_ctrl_reg; - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; - - /* Read the MII 1000Base-T Control Register (Address 9). */ - mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK; - - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; - mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; - - /* - * Need to parse media_type and set up - * the appropriate PHY registers. - */ - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_1000M_FULL: - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; - break; - - case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; - break; - - case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; - break; - - default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; - break; - } - - /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); - - hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; - hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; - - ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - - return ATL1_SUCCESS; -} - -/* - * Configures link settings. - * hw - Struct containing variables accessed by shared code - * Assumes the hardware has previously been reset and the - * transmitter and receiver are not enabled. - */ -static s32 atl1_setup_link(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - - /* - * Options: - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * no matter what autoneg is , We will not wait link result. - */ - ret_val = atl1_phy_setup_autoneg_adv(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); - return ret_val; - } - /* SW.Reset , En-Auto-Neg if needed */ - ret_val = atl1_phy_reset(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error resetting phy\n"); - return ret_val; - } - hw->phy_configured = true; - return ret_val; -} - -static struct atl1_spi_flash_dev flash_table[] = { -/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ - {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, - {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, - {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, -}; - -static void atl1_init_flash_opcode(struct atl1_hw *hw) -{ - if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) - hw->flash_vendor = 0; /* ATMEL */ - - /* Init OP table */ - iowrite8(flash_table[hw->flash_vendor].cmd_program, - hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); - iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, - hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, - hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_rdid, - hw->hw_addr + REG_SPI_FLASH_OP_RDID); - iowrite8(flash_table[hw->flash_vendor].cmd_wren, - hw->hw_addr + REG_SPI_FLASH_OP_WREN); - iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, - hw->hw_addr + REG_SPI_FLASH_OP_RDSR); - iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, - hw->hw_addr + REG_SPI_FLASH_OP_WRSR); - iowrite8(flash_table[hw->flash_vendor].cmd_read, - hw->hw_addr + REG_SPI_FLASH_OP_READ); -} - -/* - * Performs basic configuration of the adapter. - * hw - Struct containing variables accessed by shared code - * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, - * and Calls routines to setup link - * Leaves the transmit and receive units disabled and uninitialized. - */ -s32 atl1_init_hw(struct atl1_hw *hw) -{ - u32 ret_val = 0; - - /* Zero out the Multicast HASH table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - /* clear the old settings from the multicast hash table */ - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - atl1_init_flash_opcode(hw); - - if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ - ret_val = atl1_write_phy_reg(hw, 18, 0xC00); - if (ret_val) - return ret_val; - /* make PHY out of power-saving state */ - ret_val = atl1_phy_leave_power_saving(hw); - if (ret_val) - return ret_val; - /* Call a subroutine to configure the link */ - ret_val = atl1_setup_link(hw); - } - return ret_val; -} - -/* - * Detects the current speed and duplex settings of the hardware. - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - */ -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - /* ; --- Read PHY Specific Status Register (17) */ - ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED)) - return ATL1_ERR_PHY_RES; - - switch (phy_data & MII_AT001_PSSR_SPEED) { - case MII_AT001_PSSR_1000MBS: - *speed = SPEED_1000; - break; - case MII_AT001_PSSR_100MBS: - *speed = SPEED_100; - break; - case MII_AT001_PSSR_10MBS: - *speed = SPEED_10; - break; - default: - dev_dbg(&pdev->dev, "error getting speed\n"); - return ATL1_ERR_PHY_SPEED; - break; - } - if (phy_data & MII_AT001_PSSR_DPLX) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - return ATL1_SUCCESS; -} - -void atl1_set_mac_addr(struct atl1_hw *hw) -{ - u32 value; - /* - * 00-0B-6A-F6-00-DC - * 0: 6AF600DC 1: 000B - * low dword - */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - /* high dword */ - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); -} diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h deleted file mode 100644 index 939aa0f..0000000 --- a/drivers/net/atl1/atl1_hw.h +++ /dev/null @@ -1,946 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * There are a lot of defines in here that are unused and/or have cryptic - * names. Please leave them alone, as they're the closest thing we have - * to a spec from Attansic at present. *ahem* -- CHS - */ - -#ifndef _ATL1_HW_H_ -#define _ATL1_HW_H_ - -#include -#include - -struct atl1_adapter; -struct atl1_hw; - -/* function prototypes needed by multiple files */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_read_mac_addr(struct atl1_hw *hw); -s32 atl1_init_hw(struct atl1_hw *hw); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); -void atl1_set_mac_addr(struct atl1_hw *hw); -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); -s32 atl1_reset_hw(struct atl1_hw *hw); -void atl1_check_options(struct atl1_adapter *adapter); - -/* register definitions */ -#define REG_PCIE_CAP_LIST 0x58 - -#define REG_VPD_CAP 0x6C -#define VPD_CAP_ID_MASK 0xff -#define VPD_CAP_ID_SHIFT 0 -#define VPD_CAP_NEXT_PTR_MASK 0xFF -#define VPD_CAP_NEXT_PTR_SHIFT 8 -#define VPD_CAP_VPD_ADDR_MASK 0x7FFF -#define VPD_CAP_VPD_ADDR_SHIFT 16 -#define VPD_CAP_VPD_FLAG 0x80000000 - -#define REG_VPD_DATA 0x70 - -#define REG_SPI_FLASH_CTRL 0x200 -#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 -#define SPI_FLASH_CTRL_STS_WEN 0x2 -#define SPI_FLASH_CTRL_STS_WPEN 0x80 -#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF -#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 -#define SPI_FLASH_CTRL_INS_MASK 0x7 -#define SPI_FLASH_CTRL_INS_SHIFT 8 -#define SPI_FLASH_CTRL_START 0x800 -#define SPI_FLASH_CTRL_EN_VPD 0x2000 -#define SPI_FLASH_CTRL_LDSTART 0x8000 -#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 -#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 -#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 -#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 -#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 -#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 -#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 -#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 -#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 -#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 -#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 -#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 -#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 - -#define REG_SPI_ADDR 0x204 - -#define REG_SPI_DATA 0x208 - -#define REG_SPI_FLASH_CONFIG 0x20C -#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF -#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 -#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 -#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 -#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 - -#define REG_SPI_FLASH_OP_PROGRAM 0x210 -#define REG_SPI_FLASH_OP_SC_ERASE 0x211 -#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 -#define REG_SPI_FLASH_OP_RDID 0x213 -#define REG_SPI_FLASH_OP_WREN 0x214 -#define REG_SPI_FLASH_OP_RDSR 0x215 -#define REG_SPI_FLASH_OP_WRSR 0x216 -#define REG_SPI_FLASH_OP_READ 0x217 - -#define REG_TWSI_CTRL 0x218 -#define TWSI_CTRL_LD_OFFSET_MASK 0xFF -#define TWSI_CTRL_LD_OFFSET_SHIFT 0 -#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 -#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 -#define TWSI_CTRL_SW_LDSTART 0x800 -#define TWSI_CTRL_HW_LDSTART 0x1000 -#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F -#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 -#define TWSI_CTRL_LD_EXIST 0x400000 -#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 -#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 -#define TWSI_CTRL_FREQ_SEL_100K 0 -#define TWSI_CTRL_FREQ_SEL_200K 1 -#define TWSI_CTRL_FREQ_SEL_300K 2 -#define TWSI_CTRL_FREQ_SEL_400K 3 -#define TWSI_CTRL_SMB_SLV_ADDR -#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 -#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 - -#define REG_PCIE_DEV_MISC_CTRL 0x21C -#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 -#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 -#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 -#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 -#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 - -/* Selene Master Control Register */ -#define REG_MASTER_CTRL 0x1400 -#define MASTER_CTRL_SOFT_RST 0x1 -#define MASTER_CTRL_MTIMER_EN 0x2 -#define MASTER_CTRL_ITIMER_EN 0x4 -#define MASTER_CTRL_MANUAL_INT 0x8 -#define MASTER_CTRL_REV_NUM_SHIFT 16 -#define MASTER_CTRL_REV_NUM_MASK 0xff -#define MASTER_CTRL_DEV_ID_SHIFT 24 -#define MASTER_CTRL_DEV_ID_MASK 0xff - -/* Timer Initial Value Register */ -#define REG_MANUAL_TIMER_INIT 0x1404 - -/* IRQ ModeratorTimer Initial Value Register */ -#define REG_IRQ_MODU_TIMER_INIT 0x1408 - -#define REG_GPHY_ENABLE 0x140C - -/* IRQ Anti-Lost Timer Initial Value Register */ -#define REG_CMBDISDMA_TIMER 0x140E - -/* Block IDLE Status Register */ -#define REG_IDLE_STATUS 0x1410 -#define IDLE_STATUS_RXMAC 1 -#define IDLE_STATUS_TXMAC 2 -#define IDLE_STATUS_RXQ 4 -#define IDLE_STATUS_TXQ 8 -#define IDLE_STATUS_DMAR 0x10 -#define IDLE_STATUS_DMAW 0x20 -#define IDLE_STATUS_SMB 0x40 -#define IDLE_STATUS_CMB 0x80 - -/* MDIO Control Register */ -#define REG_MDIO_CTRL 0x1414 -#define MDIO_DATA_MASK 0xffff -#define MDIO_DATA_SHIFT 0 -#define MDIO_REG_ADDR_MASK 0x1f -#define MDIO_REG_ADDR_SHIFT 16 -#define MDIO_RW 0x200000 -#define MDIO_SUP_PREAMBLE 0x400000 -#define MDIO_START 0x800000 -#define MDIO_CLK_SEL_SHIFT 24 -#define MDIO_CLK_25_4 0 -#define MDIO_CLK_25_6 2 -#define MDIO_CLK_25_8 3 -#define MDIO_CLK_25_10 4 -#define MDIO_CLK_25_14 5 -#define MDIO_CLK_25_20 6 -#define MDIO_CLK_25_28 7 -#define MDIO_BUSY 0x8000000 -#define MDIO_WAIT_TIMES 30 - -/* MII PHY Status Register */ -#define REG_PHY_STATUS 0x1418 - -/* BIST Control and Status Register0 (for the Packet Memory) */ -#define REG_BIST0_CTRL 0x141c -#define BIST0_NOW 0x1 -#define BIST0_SRAM_FAIL 0x2 -#define BIST0_FUSE_FLAG 0x4 -#define REG_BIST1_CTRL 0x1420 -#define BIST1_NOW 0x1 -#define BIST1_SRAM_FAIL 0x2 -#define BIST1_FUSE_FLAG 0x4 - -/* MAC Control Register */ -#define REG_MAC_CTRL 0x1480 -#define MAC_CTRL_TX_EN 1 -#define MAC_CTRL_RX_EN 2 -#define MAC_CTRL_TX_FLOW 4 -#define MAC_CTRL_RX_FLOW 8 -#define MAC_CTRL_LOOPBACK 0x10 -#define MAC_CTRL_DUPLX 0x20 -#define MAC_CTRL_ADD_CRC 0x40 -#define MAC_CTRL_PAD 0x80 -#define MAC_CTRL_LENCHK 0x100 -#define MAC_CTRL_HUGE_EN 0x200 -#define MAC_CTRL_PRMLEN_SHIFT 10 -#define MAC_CTRL_PRMLEN_MASK 0xf -#define MAC_CTRL_RMV_VLAN 0x4000 -#define MAC_CTRL_PROMIS_EN 0x8000 -#define MAC_CTRL_TX_PAUSE 0x10000 -#define MAC_CTRL_SCNT 0x20000 -#define MAC_CTRL_SRST_TX 0x40000 -#define MAC_CTRL_TX_SIMURST 0x80000 -#define MAC_CTRL_SPEED_SHIFT 20 -#define MAC_CTRL_SPEED_MASK 0x300000 -#define MAC_CTRL_SPEED_1000 2 -#define MAC_CTRL_SPEED_10_100 1 -#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 -#define MAC_CTRL_TX_HUGE 0x800000 -#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 -#define MAC_CTRL_MC_ALL_EN 0x2000000 -#define MAC_CTRL_BC_EN 0x4000000 -#define MAC_CTRL_DBG 0x8000000 - -/* MAC IPG/IFG Control Register */ -#define REG_MAC_IPG_IFG 0x1484 -#define MAC_IPG_IFG_IPGT_SHIFT 0 -#define MAC_IPG_IFG_IPGT_MASK 0x7f -#define MAC_IPG_IFG_MIFG_SHIFT 8 -#define MAC_IPG_IFG_MIFG_MASK 0xff -#define MAC_IPG_IFG_IPGR1_SHIFT 16 -#define MAC_IPG_IFG_IPGR1_MASK 0x7f -#define MAC_IPG_IFG_IPGR2_SHIFT 24 -#define MAC_IPG_IFG_IPGR2_MASK 0x7f - -/* MAC STATION ADDRESS */ -#define REG_MAC_STA_ADDR 0x1488 - -/* Hash table for multicast address */ -#define REG_RX_HASH_TABLE 0x1490 - -/* MAC Half-Duplex Control Register */ -#define REG_MAC_HALF_DUPLX_CTRL 0x1498 -#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 -#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff -#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 -#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf -#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 -#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 -#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 -#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 -#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 -#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf -#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 -#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf - -/* Maximum Frame Length Control Register */ -#define REG_MTU 0x149c - -/* Wake-On-Lan control register */ -#define REG_WOL_CTRL 0x14a0 -#define WOL_PATTERN_EN 0x00000001 -#define WOL_PATTERN_PME_EN 0x00000002 -#define WOL_MAGIC_EN 0x00000004 -#define WOL_MAGIC_PME_EN 0x00000008 -#define WOL_LINK_CHG_EN 0x00000010 -#define WOL_LINK_CHG_PME_EN 0x00000020 -#define WOL_PATTERN_ST 0x00000100 -#define WOL_MAGIC_ST 0x00000200 -#define WOL_LINKCHG_ST 0x00000400 -#define WOL_CLK_SWITCH_EN 0x00008000 -#define WOL_PT0_EN 0x00010000 -#define WOL_PT1_EN 0x00020000 -#define WOL_PT2_EN 0x00040000 -#define WOL_PT3_EN 0x00080000 -#define WOL_PT4_EN 0x00100000 -#define WOL_PT5_EN 0x00200000 -#define WOL_PT6_EN 0x00400000 - -/* WOL Length ( 2 DWORD ) */ -#define REG_WOL_PATTERN_LEN 0x14a4 -#define WOL_PT_LEN_MASK 0x7f -#define WOL_PT0_LEN_SHIFT 0 -#define WOL_PT1_LEN_SHIFT 8 -#define WOL_PT2_LEN_SHIFT 16 -#define WOL_PT3_LEN_SHIFT 24 -#define WOL_PT4_LEN_SHIFT 0 -#define WOL_PT5_LEN_SHIFT 8 -#define WOL_PT6_LEN_SHIFT 16 - -/* Internal SRAM Partition Register */ -#define REG_SRAM_RFD_ADDR 0x1500 -#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4) -#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8) -#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12) -#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16) -#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20) -#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24) -#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28) -#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32) -#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36) -#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40) -#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44) -#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48) -#define SRAM_TCPH_ADDR_MASK 0x0fff -#define SRAM_TCPH_ADDR_SHIFT 0 -#define SRAM_PATH_ADDR_MASK 0x0fff -#define SRAM_PATH_ADDR_SHIFT 16 - -/* Load Ptr Register */ -#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52) - -/* Descriptor Control register */ -#define REG_DESC_BASE_ADDR_HI 0x1540 -#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4) -#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8) -#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12) -#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16) -#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20) -#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24) -#define DESC_RFD_RING_SIZE_MASK 0x7ff -#define DESC_RFD_RING_SIZE_SHIFT 0 -#define DESC_RRD_RING_SIZE_MASK 0x7ff -#define DESC_RRD_RING_SIZE_SHIFT 16 -#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28) -#define DESC_TPD_RING_SIZE_MASK 0x3ff -#define DESC_TPD_RING_SIZE_SHIFT 0 - -/* TXQ Control Register */ -#define REG_TXQ_CTRL 0x1580 -#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 -#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f -#define TXQ_CTRL_EN 0x20 -#define TXQ_CTRL_ENH_MODE 0x40 -#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 -#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f -#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 -#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff - -/* Jumbo packet Threshold for task offload */ -#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 -#define TX_JUMBO_TASK_TH_MASK 0x7ff -#define TX_JUMBO_TASK_TH_SHIFT 0 -#define TX_TPD_MIN_IPG_MASK 0x1f -#define TX_TPD_MIN_IPG_SHIFT 16 - -/* RXQ Control Register */ -#define REG_RXQ_CTRL 0x15a0 -#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 -#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff -#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 -#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff -#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 -#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f -#define RXQ_CTRL_CUT_THRU_EN 0x40000000 -#define RXQ_CTRL_EN 0x80000000 - -/* Rx jumbo packet threshold and rrd retirement timer */ -#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4) -#define RXQ_JMBOSZ_TH_MASK 0x7ff -#define RXQ_JMBOSZ_TH_SHIFT 0 -#define RXQ_JMBO_LKAH_MASK 0xf -#define RXQ_JMBO_LKAH_SHIFT 11 -#define RXQ_RRD_TIMER_MASK 0xffff -#define RXQ_RRD_TIMER_SHIFT 16 - -/* RFD flow control register */ -#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8) -#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 -#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff -#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 -#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff - -/* RRD flow control register */ -#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12) -#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 -#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff -#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 -#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff - -/* DMA Engine Control Register */ -#define REG_DMA_CTRL 0x15c0 -#define DMA_CTRL_DMAR_IN_ORDER 0x1 -#define DMA_CTRL_DMAR_ENH_ORDER 0x2 -#define DMA_CTRL_DMAR_OUT_ORDER 0x4 -#define DMA_CTRL_RCB_VALUE 0x8 -#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 -#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 -#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 -#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 -#define DMA_CTRL_DMAR_EN 0x400 -#define DMA_CTRL_DMAW_EN 0x800 - -/* CMB/SMB Control Register */ -#define REG_CSMB_CTRL 0x15d0 -#define CSMB_CTRL_CMB_NOW 1 -#define CSMB_CTRL_SMB_NOW 2 -#define CSMB_CTRL_CMB_EN 4 -#define CSMB_CTRL_SMB_EN 8 - -/* CMB DMA Write Threshold Register */ -#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4) -#define CMB_RRD_TH_SHIFT 0 -#define CMB_RRD_TH_MASK 0x7ff -#define CMB_TPD_TH_SHIFT 16 -#define CMB_TPD_TH_MASK 0x7ff - -/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */ -#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8) -#define CMB_RX_TM_SHIFT 0 -#define CMB_RX_TM_MASK 0xffff -#define CMB_TX_TM_SHIFT 16 -#define CMB_TX_TM_MASK 0xffff - -/* Number of packet received since last CMB write */ -#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12) - -/* Number of packet transmitted since last CMB write */ -#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16) - -/* SMB auto DMA timer register */ -#define REG_SMB_TIMER (REG_CSMB_CTRL+20) - -/* Mailbox Register */ -#define REG_MAILBOX 0x15f0 -#define MB_RFD_PROD_INDX_SHIFT 0 -#define MB_RFD_PROD_INDX_MASK 0x7ff -#define MB_RRD_CONS_INDX_SHIFT 11 -#define MB_RRD_CONS_INDX_MASK 0x7ff -#define MB_TPD_PROD_INDX_SHIFT 22 -#define MB_TPD_PROD_INDX_MASK 0x3ff - -/* Interrupt Status Register */ -#define REG_ISR 0x1600 -#define ISR_SMB 1 -#define ISR_TIMER 2 -#define ISR_MANUAL 4 -#define ISR_RXF_OV 8 -#define ISR_RFD_UNRUN 0x10 -#define ISR_RRD_OV 0x20 -#define ISR_TXF_UNRUN 0x40 -#define ISR_LINK 0x80 -#define ISR_HOST_RFD_UNRUN 0x100 -#define ISR_HOST_RRD_OV 0x200 -#define ISR_DMAR_TO_RST 0x400 -#define ISR_DMAW_TO_RST 0x800 -#define ISR_GPHY 0x1000 -#define ISR_RX_PKT 0x10000 -#define ISR_TX_PKT 0x20000 -#define ISR_TX_DMA 0x40000 -#define ISR_RX_DMA 0x80000 -#define ISR_CMB_RX 0x100000 -#define ISR_CMB_TX 0x200000 -#define ISR_MAC_RX 0x400000 -#define ISR_MAC_TX 0x800000 -#define ISR_UR_DETECTED 0x1000000 -#define ISR_FERR_DETECTED 0x2000000 -#define ISR_NFERR_DETECTED 0x4000000 -#define ISR_CERR_DETECTED 0x8000000 -#define ISR_PHY_LINKDOWN 0x10000000 -#define ISR_DIS_SMB 0x20000000 -#define ISR_DIS_DMA 0x40000000 -#define ISR_DIS_INT 0x80000000 - -/* Interrupt Mask Register */ -#define REG_IMR 0x1604 - -/* Normal Interrupt mask */ -#define IMR_NORMAL_MASK (\ - ISR_SMB |\ - ISR_GPHY |\ - ISR_PHY_LINKDOWN|\ - ISR_DMAR_TO_RST |\ - ISR_DMAW_TO_RST |\ - ISR_CMB_TX |\ - ISR_CMB_RX ) - -/* Debug Interrupt Mask (enable all interrupt) */ -#define IMR_DEBUG_MASK (\ - ISR_SMB |\ - ISR_TIMER |\ - ISR_MANUAL |\ - ISR_RXF_OV |\ - ISR_RFD_UNRUN |\ - ISR_RRD_OV |\ - ISR_TXF_UNRUN |\ - ISR_LINK |\ - ISR_CMB_TX |\ - ISR_CMB_RX |\ - ISR_RX_PKT |\ - ISR_TX_PKT |\ - ISR_MAC_RX |\ - ISR_MAC_TX ) - -/* Interrupt Status Register */ -#define REG_RFD_RRD_IDX 0x1800 -#define REG_TPD_IDX 0x1804 - -/* MII definition */ -/* PHY Common Register */ -#define MII_AT001_CR 0x09 -#define MII_AT001_SR 0x0A -#define MII_AT001_ESR 0x0F -#define MII_AT001_PSCR 0x10 -#define MII_AT001_PSSR 0x11 - -/* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_MASK 0x2040 -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -/* Link partner ability register. */ -#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ -#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ -#define MII_LPA_PAUSE 0x0400 /* PAUSE */ -#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ -#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ -#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ -#define MII_LPA_NPAGE 0x8000 /* Next page bit */ - -/* Autoneg Advertisement Register */ -#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ -#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ -#define MII_AR_SPEED_MASK 0x01E0 -#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 - -/* 1000BASE-T Control Register */ -#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */ -#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */ -#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */ -#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ -#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 -#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 - -/* 1000BASE-T Status Register */ -#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 - -/* Extended Status Register */ -#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ - -/* AT001 PHY Specific Control Register */ -#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ -#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ -#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ -#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 -#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */ -#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */ -#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ -#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */ -#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */ -#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ -#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ -#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ -#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ -#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 -#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 -#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 - -/* AT001 PHY Specific Status Register */ -#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ -#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ -#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ -#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ - -/* PCI Command Register Bit Definitions */ -#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ -#define CMD_IO_SPACE 0x0001 -#define CMD_MEMORY_SPACE 0x0002 -#define CMD_BUS_MASTER 0x0004 - -/* Wake Up Filter Control */ -#define ATL1_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define ATL1_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define ATL1_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define ATL1_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ -#define ATL1_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ - -/* Error Codes */ -#define ATL1_SUCCESS 0 -#define ATL1_ERR_EEPROM 1 -#define ATL1_ERR_PHY 2 -#define ATL1_ERR_CONFIG 3 -#define ATL1_ERR_PARAM 4 -#define ATL1_ERR_MAC_TYPE 5 -#define ATL1_ERR_PHY_TYPE 6 -#define ATL1_ERR_PHY_SPEED 7 -#define ATL1_ERR_PHY_RES 8 - -#define SPEED_0 0xffff -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define HALF_DUPLEX 1 -#define FULL_DUPLEX 2 - -#define MEDIA_TYPE_AUTO_SENSOR 0 -#define MEDIA_TYPE_1000M_FULL 1 -#define MEDIA_TYPE_100M_FULL 2 -#define MEDIA_TYPE_100M_HALF 3 -#define MEDIA_TYPE_10M_FULL 4 -#define MEDIA_TYPE_10M_HALF 5 - -#define ADVERTISE_10_HALF 0x0001 -#define ADVERTISE_10_FULL 0x0002 -#define ADVERTISE_100_HALF 0x0004 -#define ADVERTISE_100_FULL 0x0008 -#define ADVERTISE_1000_HALF 0x0010 -#define ADVERTISE_1000_FULL 0x0020 -#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ -#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ -#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ - -#define MAX_JUMBO_FRAME_SIZE 0x2800 - -#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ -#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ - -/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */ -#define EEPROM_SUM 0xBABA - -#define ATL1_EEDUMP_LEN 48 - -/* Statistics counters collected by the MAC */ -struct stats_msg_block { - /* rx */ - u32 rx_ok; /* The number of good packet received. */ - u32 rx_bcast; /* The number of good broadcast packet received. */ - u32 rx_mcast; /* The number of good multicast packet received. */ - u32 rx_pause; /* The number of Pause packet received. */ - u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */ - u32 rx_fcs_err; /* The number of packets with bad FCS. */ - u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */ - u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ - u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ - u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ - u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ - u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ - u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ - u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ - u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ - u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ - u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ - u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */ - u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ - u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ - u32 rx_align_err; /* Alignment Error */ - u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ - u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ - u32 rx_err_addr; /* The number of packets dropped due to address filtering. */ - - /* tx */ - u32 tx_ok; /* The number of good packet transmitted. */ - u32 tx_bcast; /* The number of good broadcast packet transmitted. */ - u32 tx_mcast; /* The number of good multicast packet transmitted. */ - u32 tx_pause; /* The number of Pause packet transmitted. */ - u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ - u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ - u32 tx_defer; /* The number of packets transmitted that is deferred. */ - u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ - u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ - u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ - u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ - u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ - u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ - u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ - u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ - u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ - u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ - u32 tx_late_col; /* The number of packets transmitted with late collisions. */ - u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ - u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ - u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ - u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ - u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ - u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ - u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ - u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update. - * Software should clear this bit as soon as retrieving the statistics information. */ -}; - -/* Coalescing Message Block */ -struct coals_msg_block { - u32 int_stats; /* interrupt status */ - u16 rrd_prod_idx; /* TRD Producer Index. */ - u16 rfd_cons_idx; /* RFD Consumer Index. */ - u16 update; /* Selene sets this bit every time it DMA the CMB to host memory. - * Software supposes to clear this bit when CMB information is processed. */ - u16 tpd_cons_idx; /* TPD Consumer Index. */ -}; - -/* RRD descriptor */ -struct rx_return_desc { - u8 num_buf; /* Number of RFD buffers used by the received packet */ - u8 resved; - u16 buf_indx; /* RFD Index of the first buffer */ - union { - u32 valid; - struct { - u16 rx_chksum; - u16 pkt_size; - } xsum_sz; - } xsz; - - u16 pkt_flg; /* Packet flags */ - u16 err_flg; /* Error flags */ - u16 resved2; - u16 vlan_tag; /* VLAN TAG */ -}; - -#define PACKET_FLAG_ETH_TYPE 0x0080 -#define PACKET_FLAG_VLAN_INS 0x0100 -#define PACKET_FLAG_ERR 0x0200 -#define PACKET_FLAG_IPV4 0x0400 -#define PACKET_FLAG_UDP 0x0800 -#define PACKET_FLAG_TCP 0x1000 -#define PACKET_FLAG_BCAST 0x2000 -#define PACKET_FLAG_MCAST 0x4000 -#define PACKET_FLAG_PAUSE 0x8000 - -#define ERR_FLAG_CRC 0x0001 -#define ERR_FLAG_CODE 0x0002 -#define ERR_FLAG_DRIBBLE 0x0004 -#define ERR_FLAG_RUNT 0x0008 -#define ERR_FLAG_OV 0x0010 -#define ERR_FLAG_TRUNC 0x0020 -#define ERR_FLAG_IP_CHKSUM 0x0040 -#define ERR_FLAG_L4_CHKSUM 0x0080 -#define ERR_FLAG_LEN 0x0100 -#define ERR_FLAG_DES_ADDR 0x0200 - -/* RFD descriptor */ -struct rx_free_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 buf_len; /* Size of the receive buffer in host memory, in byte */ - u16 coalese; /* Update consumer index to host after the reception of this frame */ - /* __attribute__ ((packed)) is required */ -} __attribute__ ((packed)); - -/* tsopu defines */ -#define TSO_PARAM_BUFLEN_MASK 0x3FFF -#define TSO_PARAM_BUFLEN_SHIFT 0 -#define TSO_PARAM_DMAINT_MASK 0x0001 -#define TSO_PARAM_DMAINT_SHIFT 14 -#define TSO_PARAM_PKTNT_MASK 0x0001 -#define TSO_PARAM_PKTINT_SHIFT 15 -#define TSO_PARAM_VLANTAG_MASK 0xFFFF -#define TSO_PARAM_VLAN_SHIFT 16 - -/* tsopl defines */ -#define TSO_PARAM_EOP_MASK 0x0001 -#define TSO_PARAM_EOP_SHIFT 0 -#define TSO_PARAM_COALESCE_MASK 0x0001 -#define TSO_PARAM_COALESCE_SHIFT 1 -#define TSO_PARAM_INSVLAG_MASK 0x0001 -#define TSO_PARAM_INSVLAG_SHIFT 2 -#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3 -#define TSO_PARAM_SEGMENT_MASK 0x0001 -#define TSO_PARAM_SEGMENT_SHIFT 4 -#define TSO_PARAM_IPCKSUM_MASK 0x0001 -#define TSO_PARAM_IPCKSUM_SHIFT 5 -#define TSO_PARAM_TCPCKSUM_MASK 0x0001 -#define TSO_PARAM_TCPCKSUM_SHIFT 6 -#define TSO_PARAM_UDPCKSUM_MASK 0x0001 -#define TSO_PARAM_UDPCKSUM_SHIFT 7 -#define TSO_PARAM_VLANTAGGED_MASK 0x0001 -#define TSO_PARAM_VLANTAGGED_SHIFT 8 -#define TSO_PARAM_ETHTYPE_MASK 0x0001 -#define TSO_PARAM_ETHTYPE_SHIFT 9 -#define TSO_PARAM_IPHL_MASK 0x000F -#define TSO_PARAM_IPHL_SHIFT 10 -#define TSO_PARAM_TCPHDRLEN_MASK 0x000F -#define TSO_PARAM_TCPHDRLEN_SHIFT 14 -#define TSO_PARAM_HDRFLAG_MASK 0x0001 -#define TSO_PARAM_HDRFLAG_SHIFT 18 -#define TSO_PARAM_MSS_MASK 0x1FFF -#define TSO_PARAM_MSS_SHIFT 19 - -/* csumpu defines */ -#define CSUM_PARAM_BUFLEN_MASK 0x3FFF -#define CSUM_PARAM_BUFLEN_SHIFT 0 -#define CSUM_PARAM_DMAINT_MASK 0x0001 -#define CSUM_PARAM_DMAINT_SHIFT 14 -#define CSUM_PARAM_PKTINT_MASK 0x0001 -#define CSUM_PARAM_PKTINT_SHIFT 15 -#define CSUM_PARAM_VALANTAG_MASK 0xFFFF -#define CSUM_PARAM_VALAN_SHIFT 16 - -/* csumpl defines*/ -#define CSUM_PARAM_EOP_MASK 0x0001 -#define CSUM_PARAM_EOP_SHIFT 0 -#define CSUM_PARAM_COALESCE_MASK 0x0001 -#define CSUM_PARAM_COALESCE_SHIFT 1 -#define CSUM_PARAM_INSVLAG_MASK 0x0001 -#define CSUM_PARAM_INSVLAG_SHIFT 2 -#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3 -#define CSUM_PARAM_SEGMENT_MASK 0x0001 -#define CSUM_PARAM_SEGMENT_SHIFT 4 -#define CSUM_PARAM_IPCKSUM_MASK 0x0001 -#define CSUM_PARAM_IPCKSUM_SHIFT 5 -#define CSUM_PARAM_TCPCKSUM_MASK 0x0001 -#define CSUM_PARAM_TCPCKSUM_SHIFT 6 -#define CSUM_PARAM_UDPCKSUM_MASK 0x0001 -#define CSUM_PARAM_UDPCKSUM_SHIFT 7 -#define CSUM_PARAM_VLANTAGGED_MASK 0x0001 -#define CSUM_PARAM_VLANTAGGED_SHIFT 8 -#define CSUM_PARAM_ETHTYPE_MASK 0x0001 -#define CSUM_PARAM_ETHTYPE_SHIFT 9 -#define CSUM_PARAM_IPHL_MASK 0x000F -#define CSUM_PARAM_IPHL_SHIFT 10 -#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF -#define CSUM_PARAM_PLOADOFFSET_SHIFT 16 -#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF -#define CSUM_PARAM_XSUMOFFSET_SHIFT 24 - -/* TPD descriptor */ -struct tso_param { - /* The order of these declarations is important -- don't change it */ - u32 tsopu; /* tso_param upper word */ - u32 tsopl; /* tso_param lower word */ -}; - -struct csum_param { - /* The order of these declarations is important -- don't change it */ - u32 csumpu; /* csum_param upper word */ - u32 csumpl; /* csum_param lower word */ -}; - -union tpd_descr { - u64 data; - struct csum_param csum; - struct tso_param tso; -}; - -struct tx_packet_desc { - __le64 buffer_addr; - union tpd_descr desc; -}; - -/* DMA Order Settings */ -enum atl1_dma_order { - atl1_dma_ord_in = 1, - atl1_dma_ord_enh = 2, - atl1_dma_ord_out = 4 -}; - -enum atl1_dma_rcb { - atl1_rcb_64 = 0, - atl1_rcb_128 = 1 -}; - -enum atl1_dma_req_block { - atl1_dma_req_128 = 0, - atl1_dma_req_256 = 1, - atl1_dma_req_512 = 2, - atl1_dma_req_1024 = 3, - atl1_dma_req_2048 = 4, - atl1_dma_req_4096 = 5 -}; - -struct atl1_spi_flash_dev { - const char *manu_name; /* manufacturer id */ - /* op-code */ - u8 cmd_wrsr; - u8 cmd_read; - u8 cmd_program; - u8 cmd_wren; - u8 cmd_wrdi; - u8 cmd_rdsr; - u8 cmd_rdid; - u8 cmd_sector_erase; - u8 cmd_chip_erase; -}; - -#endif /* _ATL1_HW_H_ */ diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c deleted file mode 100644 index 9200ee5..0000000 --- a/drivers/net/atl1/atl1_main.c +++ /dev/null @@ -1,2453 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * The full GNU General Public License is included in this distribution in the - * file called COPYING. - * - * Contact Information: - * Xiong Huang - * Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei, - * Xinzhu 302, TAIWAN, REPUBLIC OF CHINA - * - * Chris Snook - * Jay Cliburn - * - * This version is adapted from the Attansic reference driver for - * inclusion in the Linux kernel. It is currently under heavy development. - * A very incomplete list of things that need to be dealt with: - * - * TODO: - * Fix TSO; tx performance is horrible with TSO enabled. - * Wake on LAN. - * Add more ethtool functions. - * Fix abstruse irq enable/disable condition described here: - * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 - * - * NEEDS TESTING: - * VLAN - * multicast - * promiscuous mode - * interrupt coalescing - * SMP torture testing - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "atl1.h" - -#define DRIVER_VERSION "2.0.7" - -char atl1_driver_name[] = "atl1"; -static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver"; -static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation."; -char atl1_driver_version[] = DRIVER_VERSION; - -MODULE_AUTHOR - ("Attansic Corporation , Chris Snook , Jay Cliburn "); -MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); - -/* - * atl1_pci_tbl - PCI Device ID Table - */ -static const struct pci_device_id atl1_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, - /* required last entry */ - {0,} -}; - -MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); - -/* - * atl1_sw_init - Initialize general software structures (struct atl1_adapter) - * @adapter: board private structure to initialize - * - * atl1_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - */ -static int __devinit atl1_sw_init(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - - hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - - adapter->wol = 0; - adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; - adapter->ict = 50000; /* 100ms */ - adapter->link_speed = SPEED_0; /* hardware init */ - adapter->link_duplex = FULL_DUPLEX; - - hw->phy_configured = false; - hw->preamble_len = 7; - hw->ipgt = 0x60; - hw->min_ifg = 0x50; - hw->ipgr1 = 0x40; - hw->ipgr2 = 0x60; - hw->max_retry = 0xf; - hw->lcol = 0x37; - hw->jam_ipg = 7; - hw->rfd_burst = 8; - hw->rrd_burst = 8; - hw->rfd_fetch_gap = 1; - hw->rx_jumbo_th = adapter->rx_buffer_len / 8; - hw->rx_jumbo_lkah = 1; - hw->rrd_ret_timer = 16; - hw->tpd_burst = 4; - hw->tpd_fetch_th = 16; - hw->txf_burst = 0x100; - hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; - hw->tpd_fetch_gap = 1; - hw->rcb_value = atl1_rcb_64; - hw->dma_ord = atl1_dma_ord_enh; - hw->dmar_block = atl1_dma_req_256; - hw->dmaw_block = atl1_dma_req_256; - hw->cmb_rrd = 4; - hw->cmb_tpd = 4; - hw->cmb_rx_timer = 1; /* about 2us */ - hw->cmb_tx_timer = 1; /* about 2us */ - hw->smb_timer = 100000; /* about 200ms */ - - spin_lock_init(&adapter->lock); - spin_lock_init(&adapter->mb_lock); - - return 0; -} - -static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - u16 result; - - atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); - - return result; -} - -static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, - int val) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - atl1_write_phy_reg(&adapter->hw, reg_num, val); -} - -/* - * atl1_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ -static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - unsigned long flags; - int retval; - - if (!netif_running(netdev)) - return -EINVAL; - - spin_lock_irqsave(&adapter->lock, flags); - retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); - spin_unlock_irqrestore(&adapter->lock, flags); - - return retval; -} - -/* - * atl1_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ -static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return atl1_mii_ioctl(netdev, ifr, cmd); - default: - return -EOPNOTSUPP; - } -} - -/* - * atl1_setup_mem_resources - allocate Tx / RX descriptor resources - * @adapter: board private structure - * - * Return 0 on success, negative on failure - */ -s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - struct pci_dev *pdev = adapter->pdev; - int size; - u8 offset = 0; - - size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); - tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); - if (unlikely(!tpd_ring->buffer_info)) { - dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); - goto err_nomem; - } - rfd_ring->buffer_info = - (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); - - /* real ring DMA buffer - * each ring/block may need up to 8 bytes for alignment, hence the - * additional 40 bytes tacked onto the end. - */ - ring_header->size = size = - sizeof(struct tx_packet_desc) * tpd_ring->count - + sizeof(struct rx_free_desc) * rfd_ring->count - + sizeof(struct rx_return_desc) * rrd_ring->count - + sizeof(struct coals_msg_block) - + sizeof(struct stats_msg_block) - + 40; - - ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, - &ring_header->dma); - if (unlikely(!ring_header->desc)) { - dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); - goto err_nomem; - } - - memset(ring_header->desc, 0, ring_header->size); - - /* init TPD ring */ - tpd_ring->dma = ring_header->dma; - offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; - tpd_ring->dma += offset; - tpd_ring->desc = (u8 *) ring_header->desc + offset; - tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; - - /* init RFD ring */ - rfd_ring->dma = tpd_ring->dma + tpd_ring->size; - offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; - rfd_ring->dma += offset; - rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); - rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; - - - /* init RRD ring */ - rrd_ring->dma = rfd_ring->dma + rfd_ring->size; - offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; - rrd_ring->dma += offset; - rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); - rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; - - - /* init CMB */ - adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; - offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; - adapter->cmb.dma += offset; - adapter->cmb.cmb = (struct coals_msg_block *) - ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); - - /* init SMB */ - adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); - offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; - adapter->smb.dma += offset; - adapter->smb.smb = (struct stats_msg_block *) - ((u8 *) adapter->cmb.cmb + - (sizeof(struct coals_msg_block) + offset)); - - return ATL1_SUCCESS; - -err_nomem: - kfree(tpd_ring->buffer_info); - return -ENOMEM; -} - -static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); - - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); - - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); -} - -/* - * atl1_clean_rx_ring - Free RFD Buffers - * @adapter: board private structure - */ -static void atl1_clean_rx_ring(struct atl1_adapter *adapter) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rfd_ring->count; i++) { - buffer_info = &rfd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; - } - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct atl1_buffer) * rfd_ring->count; - memset(rfd_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(rfd_ring->desc, 0, rfd_ring->size); - - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); - - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); -} - -/* - * atl1_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure - */ -static void atl1_clean_tx_ring(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Tx ring sk_buffs */ - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - } - - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->skb) { - dev_kfree_skb_any(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct atl1_buffer) * tpd_ring->count; - memset(tpd_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(tpd_ring->desc, 0, tpd_ring->size); - - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); -} - -/* - * atl1_free_ring_resources - Free Tx / RX descriptor Resources - * @adapter: board private structure - * - * Free all transmit software resources - */ -void atl1_free_ring_resources(struct atl1_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); - - kfree(tpd_ring->buffer_info); - pci_free_consistent(pdev, ring_header->size, ring_header->desc, - ring_header->dma); - - tpd_ring->buffer_info = NULL; - tpd_ring->desc = NULL; - tpd_ring->dma = 0; - - rfd_ring->buffer_info = NULL; - rfd_ring->desc = NULL; - rfd_ring->dma = 0; - - rrd_ring->desc = NULL; - rrd_ring->dma = 0; -} - -static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) -{ - u32 value; - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - /* Config MAC CTRL Register */ - value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; - /* duplex */ - if (FULL_DUPLEX == adapter->link_duplex) - value |= MAC_CTRL_DUPLX; - /* speed */ - value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? - MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << - MAC_CTRL_SPEED_SHIFT); - /* flow control */ - value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); - /* PAD & CRC */ - value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); - /* preamble length */ - value |= (((u32) adapter->hw.preamble_len - & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); - /* vlan */ - if (adapter->vlgrp) - value |= MAC_CTRL_RMV_VLAN; - /* rx checksum - if (adapter->rx_csum) - value |= MAC_CTRL_RX_CHKSUM_EN; - */ - /* filter mode */ - value |= MAC_CTRL_BC_EN; - if (netdev->flags & IFF_PROMISC) - value |= MAC_CTRL_PROMIS_EN; - else if (netdev->flags & IFF_ALLMULTI) - value |= MAC_CTRL_MC_ALL_EN; - /* value |= MAC_CTRL_LOOPBACK; */ - iowrite32(value, hw->hw_addr + REG_MAC_CTRL); -} - -/* - * atl1_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - */ -static int atl1_set_mac(struct net_device *netdev, void *p) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct sockaddr *addr = p; - - if (netif_running(netdev)) - return -EBUSY; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); - - atl1_set_mac_addr(&adapter->hw); - return 0; -} - -static u32 atl1_check_link(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 ret_val; - u16 speed, duplex, phy_data; - int reconfig = 0; - - /* MII_BMSR must read twice */ - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - if (!(phy_data & BMSR_LSTATUS)) { /* link down */ - if (netif_carrier_ok(netdev)) { /* old link state: Up */ - dev_info(&adapter->pdev->dev, "link is down\n"); - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - return ATL1_SUCCESS; - } - - /* Link Up */ - ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) - return ret_val; - - switch (hw->media_type) { - case MEDIA_TYPE_1000M_FULL: - if (speed != SPEED_1000 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_FULL: - if (speed != SPEED_100 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_HALF: - if (speed != SPEED_100 || duplex != HALF_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_FULL: - if (speed != SPEED_10 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_HALF: - if (speed != SPEED_10 || duplex != HALF_DUPLEX) - reconfig = 1; - break; - } - - /* link result is our setting */ - if (!reconfig) { - if (adapter->link_speed != speed - || adapter->link_duplex != duplex) { - adapter->link_speed = speed; - adapter->link_duplex = duplex; - atl1_setup_mac_ctrl(adapter); - dev_info(&adapter->pdev->dev, - "%s link is up %d Mbps %s\n", - netdev->name, adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "full duplex" : "half duplex"); - } - if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } - return ATL1_SUCCESS; - } - - /* change orignal link status */ - if (netif_carrier_ok(netdev)) { - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - - if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && - hw->media_type != MEDIA_TYPE_1000M_FULL) { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - return ATL1_SUCCESS; - } - - /* auto-neg, insert timer to re-config phy */ - if (!adapter->phy_timer_pending) { - adapter->phy_timer_pending = true; - mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); - } - - return ATL1_SUCCESS; -} - -static void atl1_check_for_link(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - u16 phy_data = 0; - - spin_lock(&adapter->lock); - adapter->phy_timer_pending = false; - atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); - atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); - spin_unlock(&adapter->lock); - - /* notify upper layer link down ASAP */ - if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ - if (netif_carrier_ok(netdev)) { /* old link state: Up */ - dev_info(&adapter->pdev->dev, "%s link is down\n", - netdev->name); - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - } - schedule_work(&adapter->link_chg_task); -} - -/* - * atl1_set_multi - Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. - */ -static void atl1_set_multi(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - struct dev_mc_list *mc_ptr; - u32 rctl; - u32 hash_value; - - /* Check for Promiscuous and All Multicast modes */ - rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); - if (netdev->flags & IFF_PROMISC) - rctl |= MAC_CTRL_PROMIS_EN; - else if (netdev->flags & IFF_ALLMULTI) { - rctl |= MAC_CTRL_MC_ALL_EN; - rctl &= ~MAC_CTRL_PROMIS_EN; - } else - rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); - - iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); - - /* clear the old settings from the multicast hash table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - /* compute mc addresses' hash value ,and put it into hash table */ - for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { - hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr); - atl1_hash_set(hw, hash_value); - } -} - -/* - * atl1_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - */ -static int atl1_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - - adapter->hw.max_frame_size = max_frame; - adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; - adapter->rx_buffer_len = (max_frame + 7) & ~7; - adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; - - netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { - atl1_down(adapter); - atl1_up(adapter); - } - - return 0; -} - -static void set_flow_ctrl_old(struct atl1_adapter *adapter) -{ - u32 hi, lo, value; - - /* RFD Flow Control */ - value = adapter->rfd_ring.count; - hi = value / 16; - if (hi < 2) - hi = 2; - lo = value * 7 / 8; - - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - - /* RRD Flow Control */ - value = adapter->rrd_ring.count; - lo = value / 16; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -static void set_flow_ctrl_new(struct atl1_hw *hw) -{ - u32 hi, lo, value; - - /* RXF Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); - lo = value / 16; - if (lo < 192) - lo = 192; - hi = value * 7 / 8; - if (hi < lo) - hi = lo + 16; - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - - /* RRD Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); - lo = value / 8; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - if (hi < lo) - hi = lo + 3; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -/* - * atl1_configure - Configure Transmit&Receive Unit after Reset - * @adapter: board private structure - * - * Configure the Tx /Rx unit of the MAC after a reset. - */ -static u32 atl1_configure(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - u32 value; - - /* clear interrupt status */ - iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); - - /* set MAC Address */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | - (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - - /* tx / rx ring */ - - /* HI base address */ - iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), - hw->hw_addr + REG_DESC_BASE_ADDR_HI); - /* LO base address */ - iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RFD_ADDR_LO); - iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RRD_ADDR_LO); - iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_TPD_ADDR_LO); - iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_CMB_ADDR_LO); - iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_SMB_ADDR_LO); - - /* element count */ - value = adapter->rrd_ring.count; - value <<= 16; - value += adapter->rfd_ring.count; - iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); - iowrite32(adapter->tpd_ring.count, hw->hw_addr + - REG_DESC_TPD_RING_SIZE); - - /* Load Ptr */ - iowrite32(1, hw->hw_addr + REG_LOAD_PTR); - - /* config Mailbox */ - value = ((atomic_read(&adapter->tpd_ring.next_to_use) - & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | - ((atomic_read(&adapter->rrd_ring.next_to_clean) - & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | - ((atomic_read(&adapter->rfd_ring.next_to_use) - & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAILBOX); - - /* config IPG/IFG */ - value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) - << MAC_IPG_IFG_IPGT_SHIFT) | - (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) - << MAC_IPG_IFG_MIFG_SHIFT) | - (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) - << MAC_IPG_IFG_IPGR1_SHIFT) | - (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) - << MAC_IPG_IFG_IPGR2_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); - - /* config Half-Duplex Control */ - value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | - (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) - << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | - MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | - (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | - (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) - << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); - - /* set Interrupt Moderator Timer */ - iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); - iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); - - /* set Interrupt Clear Timer */ - iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); - - /* set max frame size hw will accept */ - iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); - - /* jumbo size & rrd retirement timer */ - value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) - << RXQ_JMBOSZ_TH_SHIFT) | - (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) - << RXQ_JMBO_LKAH_SHIFT) | - (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) - << RXQ_RRD_TIMER_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); - - /* Flow Control */ - switch (hw->dev_rev) { - case 0x8001: - case 0x9001: - case 0x9002: - case 0x9003: - set_flow_ctrl_old(adapter); - break; - default: - set_flow_ctrl_new(hw); - break; - } - - /* config TXQ */ - value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) - << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | - (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) - << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | - (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) - << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | - TXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); - - /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ - value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) - << TX_JUMBO_TASK_TH_SHIFT) | - (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) - << TX_TPD_MIN_IPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); - - /* config RXQ */ - value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) - << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | - (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) - << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | - (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) - << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | - RXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); - - /* config DMA Engine */ - value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) - << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | - ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) - << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | - DMA_CTRL_DMAW_EN; - value |= (u32) hw->dma_ord; - if (atl1_rcb_128 == hw->rcb_value) - value |= DMA_CTRL_RCB_VALUE; - iowrite32(value, hw->hw_addr + REG_DMA_CTRL); - - /* config CMB / SMB */ - value = (hw->cmb_tpd > adapter->tpd_ring.count) ? - hw->cmb_tpd : adapter->tpd_ring.count; - value <<= 16; - value |= hw->cmb_rrd; - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); - value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); - iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); - - /* --- enable CMB / SMB */ - value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; - iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); - - value = ioread32(adapter->hw.hw_addr + REG_ISR); - if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) - value = 1; /* config failed */ - else - value = 0; - - /* clear all interrupt status */ - iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); - iowrite32(0, adapter->hw.hw_addr + REG_ISR); - return value; -} - -/* - * atl1_pcie_patch - Patch for PCIE module - */ -static void atl1_pcie_patch(struct atl1_adapter *adapter) -{ - u32 value; - - /* much vendor magic here */ - value = 0x6500; - iowrite32(value, adapter->hw.hw_addr + 0x12FC); - /* pcie flow control mode change */ - value = ioread32(adapter->hw.hw_addr + 0x1008); - value |= 0x8000; - iowrite32(value, adapter->hw.hw_addr + 0x1008); -} - -/* - * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 - * on PCI Command register is disable. - * The function enable this bit. - * Brackett, 2006/03/15 - */ -static void atl1_via_workaround(struct atl1_adapter *adapter) -{ - unsigned long value; - - value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); - if (value & PCI_COMMAND_INTX_DISABLE) - value &= ~PCI_COMMAND_INTX_DISABLE; - iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); -} - -/* - * atl1_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - */ -static void atl1_irq_enable(struct atl1_adapter *adapter) -{ - iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); - ioread32(adapter->hw.hw_addr + REG_IMR); -} - -/* - * atl1_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - */ -static void atl1_irq_disable(struct atl1_adapter *adapter) -{ - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - ioread32(adapter->hw.hw_addr + REG_IMR); - synchronize_irq(adapter->pdev->irq); -} - -static void atl1_clear_phy_int(struct atl1_adapter *adapter) -{ - u16 phy_data; - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - atl1_read_phy_reg(&adapter->hw, 19, &phy_data); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_inc_smb(struct atl1_adapter *adapter) -{ - struct stats_msg_block *smb = adapter->smb.smb; - - /* Fill out the OS statistics structure */ - adapter->soft_stats.rx_packets += smb->rx_ok; - adapter->soft_stats.tx_packets += smb->tx_ok; - adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; - adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; - adapter->soft_stats.multicast += smb->rx_mcast; - adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + - smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); - - /* Rx Errors */ - adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + - smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + - smb->rx_rrd_ov + smb->rx_align_err); - adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; - adapter->soft_stats.rx_length_errors += smb->rx_len_err; - adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; - adapter->soft_stats.rx_frame_errors += smb->rx_align_err; - adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + - smb->rx_rxf_ov); - - adapter->soft_stats.rx_pause += smb->rx_pause; - adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; - adapter->soft_stats.rx_trunc += smb->rx_sz_ov; - - /* Tx Errors */ - adapter->soft_stats.tx_errors += (smb->tx_late_col + - smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); - adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; - adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; - adapter->soft_stats.tx_window_errors += smb->tx_late_col; - - adapter->soft_stats.excecol += smb->tx_abort_col; - adapter->soft_stats.deffer += smb->tx_defer; - adapter->soft_stats.scc += smb->tx_1_col; - adapter->soft_stats.mcc += smb->tx_2_col; - adapter->soft_stats.latecol += smb->tx_late_col; - adapter->soft_stats.tx_underun += smb->tx_underrun; - adapter->soft_stats.tx_trunc += smb->tx_trunc; - adapter->soft_stats.tx_pause += smb->tx_pause; - - adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; - adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; - adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; - adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; - adapter->net_stats.multicast = adapter->soft_stats.multicast; - adapter->net_stats.collisions = adapter->soft_stats.collisions; - adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; - adapter->net_stats.rx_over_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.rx_length_errors = - adapter->soft_stats.rx_length_errors; - adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; - adapter->net_stats.rx_frame_errors = - adapter->soft_stats.rx_frame_errors; - adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; - adapter->net_stats.rx_missed_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; - adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; - adapter->net_stats.tx_aborted_errors = - adapter->soft_stats.tx_aborted_errors; - adapter->net_stats.tx_window_errors = - adapter->soft_stats.tx_window_errors; - adapter->net_stats.tx_carrier_errors = - adapter->soft_stats.tx_carrier_errors; -} - -/* - * atl1_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are actually updated from the timer callback. - */ -static struct net_device_stats *atl1_get_stats(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - return &adapter->net_stats; -} - -static void atl1_update_mailbox(struct atl1_adapter *adapter) -{ - unsigned long flags; - u32 tpd_next_to_use; - u32 rfd_next_to_use; - u32 rrd_next_to_clean; - u32 value; - - spin_lock_irqsave(&adapter->mb_lock, flags); - - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); - - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - - spin_unlock_irqrestore(&adapter->mb_lock, flags); -} - -static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, u16 offset) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - - while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { - rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; - if (++rfd_ring->next_to_clean == rfd_ring->count) { - rfd_ring->next_to_clean = 0; - } - } -} - -static void atl1_update_rfd_index(struct atl1_adapter *adapter, - struct rx_return_desc *rrd) -{ - u16 num_buf; - - num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / - adapter->rx_buffer_len; - if (rrd->num_buf == num_buf) - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, num_buf); -} - -static void atl1_rx_checksum(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, struct sk_buff *skb) -{ - struct pci_dev *pdev = adapter->pdev; - - skb->ip_summed = CHECKSUM_NONE; - - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | - ERR_FLAG_CODE | ERR_FLAG_OV)) { - adapter->hw_csum_err++; - dev_printk(KERN_DEBUG, &pdev->dev, - "rx checksum error\n"); - return; - } - } - - /* not IPv4 */ - if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) - /* checksum is invalid, but it's not an IPv4 pkt, so ok */ - return; - - /* IPv4 packet */ - if (likely(!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; - return; - } - - /* IPv4, but hardware thinks its checksum is wrong */ - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); - adapter->hw_csum_err++; - return; -} - -/* - * atl1_alloc_rx_buffers - Replace used receive buffers - * @adapter: address of board private structure - */ -static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct pci_dev *pdev = adapter->pdev; - struct page *page; - unsigned long offset; - struct atl1_buffer *buffer_info, *next_info; - struct sk_buff *skb; - u16 num_alloc = 0; - u16 rfd_next_to_use, next_next; - struct rx_free_desc *rfd_desc; - - next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); - if (++next_next == rfd_ring->count) - next_next = 0; - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; - - while (!buffer_info->alloced && !next_info->alloced) { - if (buffer_info->skb) { - buffer_info->alloced = 1; - goto next; - } - - rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); - - skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); - if (unlikely(!skb)) { /* Better luck next round */ - adapter->net_stats.rx_dropped++; - break; - } - - /* - * Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - - buffer_info->alloced = 1; - buffer_info->skb = skb; - buffer_info->length = (u16) adapter->rx_buffer_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(pdev, page, offset, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); - rfd_desc->coalese = 0; - -next: - rfd_next_to_use = next_next; - if (unlikely(++next_next == rfd_ring->count)) - next_next = 0; - - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; - num_alloc++; - } - - if (num_alloc) { - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); - } - return num_alloc; -} - -static void atl1_intr_rx(struct atl1_adapter *adapter) -{ - int i, count; - u16 length; - u16 rrd_next_to_clean; - u32 value; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct rx_return_desc *rrd; - struct sk_buff *skb; - - count = 0; - - rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); - - while (1) { - rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); - i = 1; - if (likely(rrd->xsz.valid)) { /* packet valid */ -chk_rrd: - /* check rrd status */ - if (likely(rrd->num_buf == 1)) - goto rrd_ok; - - /* rrd seems to be bad */ - if (unlikely(i-- > 0)) { - /* rrd may not be DMAed completely */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "incomplete RRD DMA transfer\n"); - udelay(1); - goto chk_rrd; - } - /* bad rrd */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "bad RRD\n"); - /* see if update RFD index */ - if (rrd->num_buf > 1) - atl1_update_rfd_index(adapter, rrd); - - /* update rrd */ - rrd->xsz.valid = 0; - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - continue; - } else { /* current rrd still not be updated */ - - break; - } -rrd_ok: - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, 0); - - buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; - if (++rfd_ring->next_to_clean == rfd_ring->count) - rfd_ring->next_to_clean = 0; - - /* update rrd next to clean */ - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM - | ERR_FLAG_LEN))) { - /* packet error, don't need upstream */ - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - continue; - } - } - - /* Good Receive */ - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - skb = buffer_info->skb; - length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); - - skb_put(skb, length - ETH_FCS_LEN); - - /* Receive Checksum Offload */ - atl1_rx_checksum(adapter, rrd, skb); - skb->protocol = eth_type_trans(skb, adapter->netdev); - - if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { - u16 vlan_tag = (rrd->vlan_tag >> 4) | - ((rrd->vlan_tag & 7) << 13) | - ((rrd->vlan_tag & 8) << 9); - vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); - } else - netif_rx(skb); - - /* let protocol layer free skb */ - buffer_info->skb = NULL; - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - - adapter->netdev->last_rx = jiffies; - } - - atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); - - atl1_alloc_rx_buffers(adapter); - - /* update mailbox ? */ - if (count) { - u32 tpd_next_to_use; - u32 rfd_next_to_use; - - spin_lock(&adapter->mb_lock); - - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = - atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = - atomic_read(&adapter->rrd_ring.next_to_clean); - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - spin_unlock(&adapter->mb_lock); - } -} - -static void atl1_intr_tx(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - u16 sw_tpd_next_to_clean; - u16 cmb_tpd_next_to_clean; - - sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); - cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); - - while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { - struct tx_packet_desc *tpd; - - tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); - buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; - if (buffer_info->dma) { - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb_irq(buffer_info->skb); - buffer_info->skb = NULL; - } - tpd->buffer_addr = 0; - tpd->desc.data = 0; - - if (++sw_tpd_next_to_clean == tpd_ring->count) - sw_tpd_next_to_clean = 0; - } - atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); - - if (netif_queue_stopped(adapter->netdev) - && netif_carrier_ok(adapter->netdev)) - netif_wake_queue(adapter->netdev); -} - -static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) -{ - u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); - u16 next_to_use = atomic_read(&tpd_ring->next_to_use); - return ((next_to_clean > next_to_use) ? - next_to_clean - next_to_use - 1 : - tpd_ring->count + next_to_clean - next_to_use - 1); -} - -static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tso_param *tso) -{ - /* We enter this function holding a spinlock. */ - u8 ipofst; - int err; - - if (skb_shinfo(skb)->gso_size) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (unlikely(err)) - return err; - } - - if (skb->protocol == ntohs(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, IPPROTO_TCP, 0); - ipofst = skb_network_offset(skb); - if (ipofst != ETH_HLEN) /* 802.3 frame */ - tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; - - tso->tsopl |= (iph->ihl & - CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; - tso->tsopl |= (tcp_hdrlen(skb) & - TSO_PARAM_TCPHDRLEN_MASK) << - TSO_PARAM_TCPHDRLEN_SHIFT; - tso->tsopl |= (skb_shinfo(skb)->gso_size & - TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; - return true; - } - } - return false; -} - -static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, - struct csum_param *csum) -{ - u8 css, cso; - - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - cso = skb_transport_offset(skb); - css = cso + skb->csum_offset; - if (unlikely(cso & 0x1)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "payload offset not an even number\n"); - return -1; - } - csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << - CSUM_PARAM_PLOADOFFSET_SHIFT; - csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << - CSUM_PARAM_XSUMOFFSET_SHIFT; - csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; - return true; - } - - return true; -} - -static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, - bool tcp_seg) -{ - /* We enter this function holding a spinlock. */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct page *page; - int first_buf_len = skb->len; - unsigned long offset; - unsigned int nr_frags; - unsigned int f; - u16 tpd_next_to_use; - u16 proto_hdr_len; - u16 len12; - - first_buf_len -= skb->data_len; - nr_frags = skb_shinfo(skb)->nr_frags; - tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - buffer_info->skb = NULL; /* put skb in last TPD */ - - if (tcp_seg) { - /* TSO/GSO */ - proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - buffer_info->length = proto_hdr_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, proto_hdr_len, - PCI_DMA_TODEVICE); - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - - if (first_buf_len > proto_hdr_len) { - int i, m; - - len12 = first_buf_len - proto_hdr_len; - m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { - buffer_info = - &tpd_ring->buffer_info[tpd_next_to_use]; - buffer_info->skb = NULL; - buffer_info->length = - (ATL1_MAX_TX_BUF_LEN >= - len12) ? ATL1_MAX_TX_BUF_LEN : len12; - len12 -= buffer_info->length; - page = virt_to_page(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)); - offset = (unsigned long)(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, - page, offset, buffer_info->length, - PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - } - } else { - /* not TSO/GSO */ - buffer_info->length = first_buf_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, first_buf_len, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - u16 lenf, i, m; - - frag = &skb_shinfo(skb)->frags[f]; - lenf = frag->size; - - m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - buffer_info->skb = NULL; - buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? - ATL1_MAX_TX_BUF_LEN : lenf; - lenf -= buffer_info->length; - buffer_info->dma = pci_map_page(adapter->pdev, - frag->page, - frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), - buffer_info->length, PCI_DMA_TODEVICE); - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - } - - /* last tpd's buffer-info */ - buffer_info->skb = skb; -} - -static void atl1_tx_queue(struct atl1_adapter *adapter, int count, - union tpd_descr *descr) -{ - /* We enter this function holding a spinlock. */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - int j; - u32 val; - struct atl1_buffer *buffer_info; - struct tx_packet_desc *tpd; - u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); - - for (j = 0; j < count; j++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); - tpd->desc.csum.csumpu = descr->csum.csumpu; - tpd->desc.csum.csumpl = descr->csum.csumpl; - tpd->desc.tso.tsopu = descr->tso.tsopu; - tpd->desc.tso.tsopl = descr->tso.tsopl; - tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->desc.data = descr->data; - tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & - CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; - - val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & - TSO_PARAM_SEGMENT_MASK; - if (val && !j) - tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; - - if (j == (count - 1)) - tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - - atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); -} - -static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int len = skb->len; - int tso; - int count = 1; - int ret_val; - u32 val; - union tpd_descr param; - u16 frag_size; - u16 vlan_tag; - unsigned long flags; - unsigned int nr_frags = 0; - unsigned int mss = 0; - unsigned int f; - unsigned int proto_hdr_len; - - len -= skb->data_len; - - if (unlikely(skb->len == 0)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - param.data = 0; - param.tso.tsopu = 0; - param.tso.tsopl = 0; - param.csum.csumpu = 0; - param.csum.csumpl = 0; - - /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ - nr_frags = skb_shinfo(skb)->nr_frags; - for (f = 0; f < nr_frags; f++) { - frag_size = skb_shinfo(skb)->frags[f].size; - if (frag_size) - count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - } - - /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ - mss = skb_shinfo(skb)->gso_size; - if (mss) { - if (skb->protocol == htons(ETH_P_IP)) { - proto_hdr_len = (skb_transport_offset(skb) + - tcp_hdrlen(skb)); - if (unlikely(proto_hdr_len > len)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - /* need additional TPD ? */ - if (proto_hdr_len != len) - count += (len - proto_hdr_len + - ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - } - } - - if (!spin_trylock_irqsave(&adapter->lock, flags)) { - /* Can't get lock - tell upper layer to requeue */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); - return NETDEV_TX_LOCKED; - } - - if (atl1_tpd_avail(&adapter->tpd_ring) < count) { - /* not enough descriptors */ - netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->lock, flags); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); - return NETDEV_TX_BUSY; - } - - param.data = 0; - - if (adapter->vlgrp && vlan_tx_tag_present(skb)) { - vlan_tag = vlan_tx_tag_get(skb); - vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | - ((vlan_tag >> 9) & 0x8); - param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; - param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << - CSUM_PARAM_VALAN_SHIFT; - } - - tso = atl1_tso(adapter, skb, ¶m.tso); - if (tso < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (!tso) { - ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); - if (ret_val < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - } - - val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & - CSUM_PARAM_SEGMENT_MASK; - atl1_tx_map(adapter, skb, 1 == val); - atl1_tx_queue(adapter, count, ¶m); - netdev->trans_start = jiffies; - spin_unlock_irqrestore(&adapter->lock, flags); - atl1_update_mailbox(adapter); - return NETDEV_TX_OK; -} - -/* - * atl1_intr - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure - */ -static irqreturn_t atl1_intr(int irq, void *data) -{ - struct atl1_adapter *adapter = netdev_priv(data); - u32 status; - u8 update_rx; - int max_ints = 10; - - status = adapter->cmb.cmb->int_stats; - if (!status) - return IRQ_NONE; - - update_rx = 0; - - do { - /* clear CMB interrupt status at once */ - adapter->cmb.cmb->int_stats = 0; - - if (status & ISR_GPHY) /* clear phy status */ - atl1_clear_phy_int(adapter); - - /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ - iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); - - /* check if SMB intr */ - if (status & ISR_SMB) - atl1_inc_smb(adapter); - - /* check if PCIE PHY Link down */ - if (status & ISR_PHY_LINKDOWN) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie phy link down %x\n", status); - if (netif_running(adapter->netdev)) { /* reset MAC */ - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } - } - - /* check if DMA read/write error ? */ - if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie DMA r/w error (status = 0x%x)\n", - status); - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } - - /* link event */ - if (status & ISR_GPHY) { - adapter->soft_stats.tx_carrier_errors++; - atl1_check_for_link(adapter); - } - - /* transmit event */ - if (status & ISR_CMB_TX) - atl1_intr_tx(adapter); - - /* rx exception */ - if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV | ISR_CMB_RX))) { - if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "rx exception, ISR = 0x%x\n", status); - atl1_intr_rx(adapter); - } - - if (--max_ints < 0) - break; - - } while ((status = adapter->cmb.cmb->int_stats)); - - /* re-enable Interrupt */ - iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); - return IRQ_HANDLED; -} - -/* - * atl1_watchdog - Timer Call-back - * @data: pointer to netdev cast into an unsigned long - */ -static void atl1_watchdog(unsigned long data) -{ - struct atl1_adapter *adapter = (struct atl1_adapter *)data; - - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); -} - -/* - * atl1_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long - */ -static void atl1_phy_config(unsigned long data) -{ - struct atl1_adapter *adapter = (struct atl1_adapter *)data; - struct atl1_hw *hw = &adapter->hw; - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - adapter->phy_timer_pending = false; - atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); - atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg); - atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -/* - * atl1_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - */ -static void atl1_tx_timeout(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - /* Do the reset outside of interrupt context */ - schedule_work(&adapter->tx_timeout_task); -} - -/* - * Orphaned vendor comment left intact here: - * - * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT - * will assert. We do soft reset <0x1400=1> according - * with the SPEC. BUT, it seemes that PCIE or DMA - * state-machine will not be reset. DMAR_TO_INT will - * assert again and again. - * - */ -static void atl1_tx_timeout_task(struct work_struct *work) -{ - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); - struct net_device *netdev = adapter->netdev; - - netif_device_detach(netdev); - atl1_down(adapter); - atl1_up(adapter); - netif_device_attach(netdev); -} - -/* - * atl1_link_chg_task - deal with link change event Out of interrupt context - */ -static void atl1_link_chg_task(struct work_struct *work) -{ - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, link_chg_task); - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - atl1_check_link(adapter); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_vlan_rx_register(struct net_device *netdev, - struct vlan_group *grp) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - unsigned long flags; - u32 ctrl; - - spin_lock_irqsave(&adapter->lock, flags); - /* atl1_irq_disable(adapter); */ - adapter->vlgrp = grp; - - if (grp) { - /* enable VLAN tag insert/strip */ - ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); - ctrl |= MAC_CTRL_RMV_VLAN; - iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); - } else { - /* disable VLAN tag insert/strip */ - ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_RMV_VLAN; - iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); - } - - /* atl1_irq_enable(adapter); */ - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_restore_vlan(struct atl1_adapter *adapter) -{ - atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp); -} - -int atl1_reset(struct atl1_adapter *adapter) -{ - int ret; - - ret = atl1_reset_hw(&adapter->hw); - if (ret != ATL1_SUCCESS) - return ret; - return atl1_init_hw(&adapter->hw); -} - -s32 atl1_up(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int err; - int irq_flags = IRQF_SAMPLE_RANDOM; - - /* hardware has been reset, we need to reload some things */ - atl1_set_multi(netdev); - atl1_init_ring_ptrs(adapter); - atl1_restore_vlan(adapter); - err = atl1_alloc_rx_buffers(adapter); - if (unlikely(!err)) /* no RX BUFFER allocated */ - return -ENOMEM; - - if (unlikely(atl1_configure(adapter))) { - err = -EIO; - goto err_up; - } - - err = pci_enable_msi(adapter->pdev); - if (err) { - dev_info(&adapter->pdev->dev, - "Unable to enable MSI: %d\n", err); - irq_flags |= IRQF_SHARED; - } - - err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, - netdev->name, netdev); - if (unlikely(err)) - goto err_up; - - mod_timer(&adapter->watchdog_timer, jiffies); - atl1_irq_enable(adapter); - atl1_check_link(adapter); - return 0; - -err_up: - pci_disable_msi(adapter->pdev); - /* free rx_buffers */ - atl1_clean_rx_ring(adapter); - return err; -} - -void atl1_down(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_config_timer); - adapter->phy_timer_pending = false; - - atl1_irq_disable(adapter); - free_irq(adapter->pdev->irq, netdev); - pci_disable_msi(adapter->pdev); - atl1_reset_hw(&adapter->hw); - adapter->cmb.cmb->int_stats = 0; - - adapter->link_speed = SPEED_0; - adapter->link_duplex = -1; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); -} - -/* - * atl1_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - */ -static int atl1_open(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int err; - - /* allocate transmit descriptors */ - err = atl1_setup_ring_resources(adapter); - if (err) - return err; - - err = atl1_up(adapter); - if (err) - goto err_up; - - return 0; - -err_up: - atl1_reset(adapter); - return err; -} - -/* - * atl1_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - */ -static int atl1_close(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - atl1_down(adapter); - atl1_free_ring_resources(adapter); - return 0; -} - -#ifdef CONFIG_PM -static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u32 ctrl = 0; - u32 wufc = adapter->wol; - - netif_device_detach(netdev); - if (netif_running(netdev)) - atl1_down(adapter); - - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - if (ctrl & BMSR_LSTATUS) - wufc &= ~ATL1_WUFC_LNKC; - - /* reduce speed to 10/100M */ - if (wufc) { - atl1_phy_enter_power_saving(hw); - /* if resume, let driver to re- setup link */ - hw->phy_configured = false; - atl1_set_mac_addr(hw); - atl1_set_multi(netdev); - - ctrl = 0; - /* turn on magic packet wol */ - if (wufc & ATL1_WUFC_MAG) - ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; - - /* turn on Link change WOL */ - if (wufc & ATL1_WUFC_LNKC) - ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); - iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); - - /* turn on all-multi mode if wake on multicast is enabled */ - ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_DBG; - ctrl &= ~MAC_CTRL_PROMIS_EN; - if (wufc & ATL1_WUFC_MC) - ctrl |= MAC_CTRL_MC_ALL_EN; - else - ctrl &= ~MAC_CTRL_MC_ALL_EN; - - /* turn on broadcast mode if wake on-BC is enabled */ - if (wufc & ATL1_WUFC_BC) - ctrl |= MAC_CTRL_BC_EN; - else - ctrl &= ~MAC_CTRL_BC_EN; - - /* enable RX */ - ctrl |= MAC_CTRL_RX_EN; - iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - iowrite32(0, hw->hw_addr + REG_WOL_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - } - - pci_save_state(pdev); - pci_disable_device(pdev); - - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int atl1_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - u32 ret_val; - - pci_set_power_state(pdev, 0); - pci_restore_state(pdev); - - ret_val = pci_enable_device(pdev); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); - atl1_reset(adapter); - - if (netif_running(netdev)) - atl1_up(adapter); - netif_device_attach(netdev); - - atl1_via_workaround(adapter); - - return 0; -} -#else -#define atl1_suspend NULL -#define atl1_resume NULL -#endif - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void atl1_poll_controller(struct net_device *netdev) -{ - disable_irq(netdev->irq); - atl1_intr(netdev->irq, netdev); - enable_irq(netdev->irq); -} -#endif - -/* - * atl1_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in atl1_pci_tbl - * - * Returns 0 on success, negative on failure - * - * atl1_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - */ -static int __devinit atl1_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct atl1_adapter *adapter; - static int cards_found = 0; - int err; - - err = pci_enable_device(pdev); - if (err) - return err; - - /* - * The atl1 chip can DMA to 64-bit addresses, but it uses a single - * shared register for the high 32 bits, so only a single, aligned, - * 4 GB physical address range can be used at a time. - * - * Supporting 64-bit DMA on this hardware is more trouble than it's - * worth. It is far easier to limit to 32-bit DMA than update - * various kernel subsystems to support the mechanics required by a - * fixed-high-32-bit system. - */ - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_dma; - } - /* Mark all PCI regions associated with PCI device - * pdev as being reserved by owner atl1_driver_name - */ - err = pci_request_regions(pdev, atl1_driver_name); - if (err) - goto err_request_regions; - - /* Enables bus-mastering on the device and calls - * pcibios_set_master to do the needed arch specific settings - */ - pci_set_master(pdev); - - netdev = alloc_etherdev(sizeof(struct atl1_adapter)); - if (!netdev) { - err = -ENOMEM; - goto err_alloc_etherdev; - } - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - adapter->hw.back = adapter; - - adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); - if (!adapter->hw.hw_addr) { - err = -EIO; - goto err_pci_iomap; - } - /* get device revision number */ - adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + - (REG_MASTER_CTRL + 2)); - dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); - - /* set default ring resource counts */ - adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; - adapter->tpd_ring.count = ATL1_DEFAULT_TPD; - - adapter->mii.dev = netdev; - adapter->mii.mdio_read = mdio_read; - adapter->mii.mdio_write = mdio_write; - adapter->mii.phy_id_mask = 0x1f; - adapter->mii.reg_num_mask = 0x1f; - - netdev->open = &atl1_open; - netdev->stop = &atl1_close; - netdev->hard_start_xmit = &atl1_xmit_frame; - netdev->get_stats = &atl1_get_stats; - netdev->set_multicast_list = &atl1_set_multi; - netdev->set_mac_address = &atl1_set_mac; - netdev->change_mtu = &atl1_change_mtu; - netdev->do_ioctl = &atl1_ioctl; - netdev->tx_timeout = &atl1_tx_timeout; - netdev->watchdog_timeo = 5 * HZ; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = atl1_poll_controller; -#endif - netdev->vlan_rx_register = atl1_vlan_rx_register; - - netdev->ethtool_ops = &atl1_ethtool_ops; - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = atl1_sw_init(adapter); - if (err) - goto err_common; - - netdev->features = NETIF_F_HW_CSUM; - netdev->features |= NETIF_F_SG; - netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); - - /* - * FIXME - Until tso performance gets fixed, disable the feature. - * Enable it with ethtool -K if desired. - */ - /* netdev->features |= NETIF_F_TSO; */ - - netdev->features |= NETIF_F_LLTX; - - /* - * patch for some L1 of old version, - * the final version of L1 may not need these - * patches - */ - /* atl1_pcie_patch(adapter); */ - - /* really reset GPHY core */ - iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); - - /* - * reset the controller to - * put the device in a known good starting state - */ - if (atl1_reset_hw(&adapter->hw)) { - err = -EIO; - goto err_common; - } - - /* copy the MAC address out of the EEPROM */ - atl1_read_mac_addr(&adapter->hw); - memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->dev_addr)) { - err = -EIO; - goto err_common; - } - - atl1_check_options(adapter); - - /* pre-init the MAC, and setup link */ - err = atl1_init_hw(&adapter->hw); - if (err) { - err = -EIO; - goto err_common; - } - - atl1_pcie_patch(adapter); - /* assume we have no link for now */ - netif_carrier_off(netdev); - netif_stop_queue(netdev); - - init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = &atl1_watchdog; - adapter->watchdog_timer.data = (unsigned long)adapter; - - init_timer(&adapter->phy_config_timer); - adapter->phy_config_timer.function = &atl1_phy_config; - adapter->phy_config_timer.data = (unsigned long)adapter; - adapter->phy_timer_pending = false; - - INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); - - INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task); - - INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); - - err = register_netdev(netdev); - if (err) - goto err_common; - - cards_found++; - atl1_via_workaround(adapter); - return 0; - -err_common: - pci_iounmap(pdev, adapter->hw.hw_addr); -err_pci_iomap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_regions(pdev); -err_dma: -err_request_regions: - pci_disable_device(pdev); - return err; -} - -/* - * atl1_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * atl1_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - */ -static void __devexit atl1_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter; - /* Device not available. Return. */ - if (!netdev) - return; - - adapter = netdev_priv(netdev); - - /* Some atl1 boards lack persistent storage for their MAC, and get it - * from the BIOS during POST. If we've been messing with the MAC - * address, we need to save the permanent one. - */ - if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { - memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, - ETH_ALEN); - atl1_set_mac_addr(&adapter->hw); - } - - iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); - unregister_netdev(netdev); - pci_iounmap(pdev, adapter->hw.hw_addr); - pci_release_regions(pdev); - free_netdev(netdev); - pci_disable_device(pdev); -} - -static struct pci_driver atl1_driver = { - .name = atl1_driver_name, - .id_table = atl1_pci_tbl, - .probe = atl1_probe, - .remove = __devexit_p(atl1_remove), - .suspend = atl1_suspend, - .resume = atl1_resume -}; - -/* - * atl1_exit_module - Driver Exit Cleanup Routine - * - * atl1_exit_module is called just before the driver is removed - * from memory. - */ -static void __exit atl1_exit_module(void) -{ - pci_unregister_driver(&atl1_driver); -} - -/* - * atl1_init_module - Driver Registration Routine - * - * atl1_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - */ -static int __init atl1_init_module(void) -{ - return pci_register_driver(&atl1_driver); -} - -module_init(atl1_init_module); -module_exit(atl1_exit_module); diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c deleted file mode 100644 index 4246bb9..0000000 --- a/drivers/net/atl1/atl1_param.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include "atl1.h" - -/* - * This is the only thing that needs to be changed to adjust the - * maximum number of ports that the driver can manage. - */ -#define ATL1_MAX_NIC 4 - -#define OPTION_UNSET -1 -#define OPTION_DISABLED 0 -#define OPTION_ENABLED 1 - -#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } - -/* - * Interrupt Moderate Timer in units of 2 us - * - * Valid Range: 10-65535 - * - * Default Value: 100 (200us) - */ -static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; -static int num_int_mod_timer = 0; -module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0); -MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); - -/* - * flash_vendor - * - * Valid Range: 0-2 - * - * 0 - Atmel - * 1 - SST - * 2 - ST - * - * Default Value: 0 - */ -static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; -static int num_flash_vendor = 0; -module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0); -MODULE_PARM_DESC(flash_vendor, "SPI flash vendor"); - -#define DEFAULT_INT_MOD_CNT 100 /* 200us */ -#define MAX_INT_MOD_CNT 65000 -#define MIN_INT_MOD_CNT 50 - -#define FLASH_VENDOR_DEFAULT 0 -#define FLASH_VENDOR_MIN 0 -#define FLASH_VENDOR_MAX 2 - -struct atl1_option { - enum { enable_option, range_option, list_option } type; - char *name; - char *err; - int def; - union { - struct { /* range_option info */ - int min; - int max; - } r; - struct { /* list_option info */ - int nr; - struct atl1_opt_list { - int i; - char *str; - } *p; - } l; - } arg; -}; - -static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev) -{ - if (*value == OPTION_UNSET) { - *value = opt->def; - return 0; - } - - switch (opt->type) { - case enable_option: - switch (*value) { - case OPTION_ENABLED: - dev_info(&pdev->dev, "%s enabled\n", opt->name); - return 0; - case OPTION_DISABLED: - dev_info(&pdev->dev, "%s disabled\n", opt->name); - return 0; - } - break; - case range_option: - if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - dev_info(&pdev->dev, "%s set to %i\n", opt->name, - *value); - return 0; - } - break; - case list_option:{ - int i; - struct atl1_opt_list *ent; - - for (i = 0; i < opt->arg.l.nr; i++) { - ent = &opt->arg.l.p[i]; - if (*value == ent->i) { - if (ent->str[0] != '\0') - dev_info(&pdev->dev, "%s\n", - ent->str); - return 0; - } - } - } - break; - - default: - break; - } - - dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", - opt->name, *value, opt->err); - *value = opt->def; - return -1; -} - -/* - * atl1_check_options - Range Checking for Command Line Parameters - * @adapter: board private structure - * - * This routine checks all command line parameters for valid user - * input. If an invalid value is given, or if no user specified - * value exists, a default value is used. The final value is stored - * in a variable in the adapter structure. - */ -void __devinit atl1_check_options(struct atl1_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int bd = adapter->bd_number; - if (bd >= ATL1_MAX_NIC) { - dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); - dev_notice(&pdev->dev, "using defaults for all values\n"); - } - { /* Interrupt Moderate Timer */ - struct atl1_option opt = { - .type = range_option, - .name = "Interrupt Moderator Timer", - .err = "using default of " - __MODULE_STRING(DEFAULT_INT_MOD_CNT), - .def = DEFAULT_INT_MOD_CNT, - .arg = {.r = - {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}} - }; - int val; - if (num_int_mod_timer > bd) { - val = int_mod_timer[bd]; - atl1_validate_option(&val, &opt, pdev); - adapter->imt = (u16) val; - } else - adapter->imt = (u16) (opt.def); - } - - { /* Flash Vendor */ - struct atl1_option opt = { - .type = range_option, - .name = "SPI Flash Vendor", - .err = "using default of " - __MODULE_STRING(FLASH_VENDOR_DEFAULT), - .def = DEFAULT_INT_MOD_CNT, - .arg = {.r = - {.min = FLASH_VENDOR_MIN,.max = - FLASH_VENDOR_MAX}} - }; - int val; - if (num_flash_vendor > bd) { - val = flash_vendor[bd]; - atl1_validate_option(&val, &opt, pdev); - adapter->hw.flash_vendor = (u8) val; - } else - adapter->hw.flash_vendor = (u8) (opt.def); - } -} diff --git a/drivers/net/atlx/Makefile b/drivers/net/atlx/Makefile new file mode 100644 index 0000000..a6b707e --- /dev/null +++ b/drivers/net/atlx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ATL1) += atl1.o +atl1-y += atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h new file mode 100644 index 0000000..ff4765f6 --- /dev/null +++ b/drivers/net/atlx/atl1.h @@ -0,0 +1,286 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1_H_ +#define _ATL1_H_ + +#include +#include + +#include "atl1_hw.h" + +/* function prototypes needed by multiple files */ +s32 atl1_up(struct atl1_adapter *adapter); +void atl1_down(struct atl1_adapter *adapter); +int atl1_reset(struct atl1_adapter *adapter); +s32 atl1_setup_ring_resources(struct atl1_adapter *adapter); +void atl1_free_ring_resources(struct atl1_adapter *adapter); + +extern char atl1_driver_name[]; +extern char atl1_driver_version[]; +extern const struct ethtool_ops atl1_ethtool_ops; + +struct atl1_adapter; + +#define ATL1_MAX_INTR 3 +#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */ + +#define ATL1_DEFAULT_TPD 256 +#define ATL1_MAX_TPD 1024 +#define ATL1_MIN_TPD 64 +#define ATL1_DEFAULT_RFD 512 +#define ATL1_MIN_RFD 128 +#define ATL1_MAX_RFD 2048 + +#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) +#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc) +#define ATL1_TPD_DESC(R, i) ATL1_GET_DESC(R, i, struct tx_packet_desc) +#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc) + +/* + * This detached comment is preserved for documentation purposes only. + * It was originally attached to some code that got deleted, but seems + * important enough to keep around... + * + * + * Some workarounds require millisecond delays and are run during interrupt + * context. Most notably, when establishing link, the phy may need tweaking + * but cannot process phy register reads/writes faster than millisecond + * intervals...and we establish link due to a "link status change" interrupt. + * + */ + +/* + * atl1_ring_header represents a single, contiguous block of DMA space + * mapped for the three descriptor rings (tpd, rfd, rrd) and the two + * message blocks (cmb, smb) described below + */ +struct atl1_ring_header { + void *desc; /* virtual address */ + dma_addr_t dma; /* physical address*/ + unsigned int size; /* length in bytes */ +}; + +/* + * atl1_buffer is wrapper around a pointer to a socket buffer + * so a DMA handle can be stored along with the skb + */ +struct atl1_buffer { + struct sk_buff *skb; /* socket buffer */ + u16 length; /* rx buffer length */ + u16 alloced; /* 1 if skb allocated */ + dma_addr_t dma; +}; + +/* transmit packet descriptor (tpd) ring */ +struct atl1_tpd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 hw_idx; /* hardware index */ + atomic_t next_to_clean; + atomic_t next_to_use; + struct atl1_buffer *buffer_info; +}; + +/* receive free descriptor (rfd) ring */ +struct atl1_rfd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + atomic_t next_to_use; + u16 next_to_clean; + struct atl1_buffer *buffer_info; +}; + +/* receive return descriptor (rrd) ring */ +struct atl1_rrd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + unsigned int size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + atomic_t next_to_clean; +}; + +/* coalescing message block (cmb) */ +struct atl1_cmb { + struct coals_msg_block *cmb; + dma_addr_t dma; +}; + +/* statistics message block (smb) */ +struct atl1_smb { + struct stats_msg_block *smb; + dma_addr_t dma; +}; + +/* Statistics counters */ +struct atl1_sft_stats { + u64 rx_packets; + u64 tx_packets; + u64 rx_bytes; + u64 tx_bytes; + u64 multicast; + u64 collisions; + u64 rx_errors; + u64 rx_length_errors; + u64 rx_crc_errors; + u64 rx_frame_errors; + u64 rx_fifo_errors; + u64 rx_missed_errors; + u64 tx_errors; + u64 tx_fifo_errors; + u64 tx_aborted_errors; + u64 tx_window_errors; + u64 tx_carrier_errors; + u64 tx_pause; /* num pause packets transmitted. */ + u64 excecol; /* num tx packets w/ excessive collisions. */ + u64 deffer; /* num tx packets deferred */ + u64 scc; /* num packets subsequently transmitted + * successfully w/ single prior collision. */ + u64 mcc; /* num packets subsequently transmitted + * successfully w/ multiple prior collisions. */ + u64 latecol; /* num tx packets w/ late collisions. */ + u64 tx_underun; /* num tx packets aborted due to transmit + * FIFO underrun, or TRD FIFO underrun */ + u64 tx_trunc; /* num tx packets truncated due to size + * exceeding MTU, regardless whether truncated + * by the chip or not. (The name doesn't really + * reflect the meaning in this case.) */ + u64 rx_pause; /* num Pause packets received. */ + u64 rx_rrd_ov; + u64 rx_trunc; +}; + +/* hardware structure */ +struct atl1_hw { + u8 __iomem *hw_addr; + struct atl1_adapter *back; + enum atl1_dma_order dma_ord; + enum atl1_dma_rcb rcb_value; + enum atl1_dma_req_block dmar_block; + enum atl1_dma_req_block dmaw_block; + u8 preamble_len; + u8 max_retry; /* Retransmission maximum, after which the + * packet will be discarded */ + u8 jam_ipg; /* IPG to start JAM for collision based flow + * control in half-duplex mode. In units of + * 8-bit time */ + u8 ipgt; /* Desired back to back inter-packet gap. + * The default is 96-bit time */ + u8 min_ifg; /* Minimum number of IFG to enforce in between + * receive frames. Frame gap below such IFP + * is dropped */ + u8 ipgr1; /* 64bit Carrier-Sense window */ + u8 ipgr2; /* 96-bit IPG window */ + u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned + * burst. Each TPD is 16 bytes long */ + u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned + * burst. Each RFD is 12 bytes long */ + u8 rfd_fetch_gap; + u8 rrd_burst; /* Threshold number of RRDs that can be retired + * in a burst. Each RRD is 16 bytes long */ + u8 tpd_fetch_th; + u8 tpd_fetch_gap; + u16 tx_jumbo_task_th; + u16 txf_burst; /* Number of data bytes to read in a cache- + * aligned burst. Each SRAM entry is 8 bytes */ + u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN + * packets should add 4 bytes */ + u16 rx_jumbo_lkah; + u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after + * every 512ns passes. */ + u16 lcol; /* Collision Window */ + + u16 cmb_tpd; + u16 cmb_rrd; + u16 cmb_rx_timer; + u16 cmb_tx_timer; + u32 smb_timer; + u16 media_type; + u16 autoneg_advertised; + + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u32 max_frame_size; + u32 min_frame_size; + + u16 dev_rev; + + /* spi flash */ + u8 flash_vendor; + + u8 mac_addr[ETH_ALEN]; + u8 perm_mac_addr[ETH_ALEN]; + + bool phy_configured; +}; + +struct atl1_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + struct net_device_stats net_stats; + struct atl1_sft_stats soft_stats; + struct vlan_group *vlgrp; + u32 rx_buffer_len; + u32 wol; + u16 link_speed; + u16 link_duplex; + spinlock_t lock; + struct work_struct tx_timeout_task; + struct work_struct link_chg_task; + struct work_struct pcie_dma_to_rst_task; + struct timer_list watchdog_timer; + struct timer_list phy_config_timer; + bool phy_timer_pending; + + /* all descriptor rings' memory */ + struct atl1_ring_header ring_header; + + /* TX */ + struct atl1_tpd_ring tpd_ring; + spinlock_t mb_lock; + + /* RX */ + struct atl1_rfd_ring rfd_ring; + struct atl1_rrd_ring rrd_ring; + u64 hw_csum_err; + u64 hw_csum_good; + + u16 imt; /* interrupt moderator timer (2us resolution */ + u16 ict; /* interrupt clear timer (2us resolution */ + struct mii_if_info mii; /* MII interface info */ + + /* structs defined in atl1_hw.h */ + u32 bd_number; /* board number */ + bool pci_using_64; + struct atl1_hw hw; + struct atl1_smb smb; + struct atl1_cmb cmb; +}; + +#endif /* _ATL1_H_ */ diff --git a/drivers/net/atlx/atl1_ethtool.c b/drivers/net/atlx/atl1_ethtool.c new file mode 100644 index 0000000..68a83be --- /dev/null +++ b/drivers/net/atlx/atl1_ethtool.c @@ -0,0 +1,505 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "atl1.h" + +struct atl1_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \ + offsetof(struct atl1_adapter, m) + +static struct atl1_stats atl1_gstrings_stats[] = { + {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, + {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, + {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, + {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, + {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, + {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, + {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, + {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, + {"multicast", ATL1_STAT(soft_stats.multicast)}, + {"collisions", ATL1_STAT(soft_stats.collisions)}, + {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, + {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, + {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, + {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, + {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, + {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, + {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, + {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, + {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, + {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, + {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, + {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, + {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, + {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, + {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, + {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, + {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, + {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, + {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} +}; + +static void atl1_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int i; + char *p; + + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; + data[i] = (atl1_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + +} + +static int atl1_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(atl1_gstrings_stats); + default: + return -EOPNOTSUPP; + } +} + +static int atl1_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + ecmd->advertising |= ADVERTISED_Autoneg; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->advertising |= + (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + } + else + ecmd->advertising |= (ADVERTISED_1000baseT_Full); + } + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (netif_carrier_ok(adapter->netdev)) { + u16 link_speed, link_duplex; + atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); + ecmd->speed = link_speed; + if (link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; + + return 0; +} + +static int atl1_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u16 phy_data; + int ret_val = 0; + u16 old_media_type = hw->media_type; + + if (netif_running(adapter->netdev)) { + dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); + atl1_down(adapter); + } + + if (ecmd->autoneg == AUTONEG_ENABLE) + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + else { + if (ecmd->speed == SPEED_1000) { + if (ecmd->duplex != DUPLEX_FULL) { + dev_warn(&adapter->pdev->dev, + "can't force to 1000M half duplex\n"); + ret_val = -EINVAL; + goto exit_sset; + } + hw->media_type = MEDIA_TYPE_1000M_FULL; + } else if (ecmd->speed == SPEED_100) { + if (ecmd->duplex == DUPLEX_FULL) { + hw->media_type = MEDIA_TYPE_100M_FULL; + } else + hw->media_type = MEDIA_TYPE_100M_HALF; + } else { + if (ecmd->duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_10M_FULL; + else + hw->media_type = MEDIA_TYPE_10M_HALF; + } + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ecmd->advertising = + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + case MEDIA_TYPE_1000M_FULL: + ecmd->advertising = + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + default: + ecmd->advertising = 0; + break; + } + if (atl1_phy_setup_autoneg_adv(hw)) { + ret_val = -EINVAL; + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); + goto exit_sset; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); +exit_sset: + if (ret_val) + hw->media_type = old_media_type; + + if (netif_running(adapter->netdev)) { + dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); + atl1_up(adapter); + } else if (!ret_val) { + dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); + atl1_reset(adapter); + } + return ret_val; +} + +static void atl1_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, atl1_driver_name, sizeof(drvinfo->driver)); + strncpy(drvinfo->version, atl1_driver_version, + sizeof(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->eedump_len = ATL1_EEDUMP_LEN; +} + +static void atl1_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + if (adapter->wol & ATL1_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & ATL1_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & ATL1_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & ATL1_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + return; +} + +static int atl1_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + adapter->wol = 0; + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= ATL1_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= ATL1_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= ATL1_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= ATL1_WUFC_MAG; + return 0; +} + +static void atl1_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *txdr = &adapter->tpd_ring; + struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; + + ring->rx_max_pending = ATL1_MAX_RFD; + ring->tx_max_pending = ATL1_MAX_TPD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int atl1_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; + struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; + struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; + + struct atl1_tpd_ring tpd_old, tpd_new; + struct atl1_rfd_ring rfd_old, rfd_new; + struct atl1_rrd_ring rrd_old, rrd_new; + struct atl1_ring_header rhdr_old, rhdr_new; + int err; + + tpd_old = adapter->tpd_ring; + rfd_old = adapter->rfd_ring; + rrd_old = adapter->rrd_ring; + rhdr_old = adapter->ring_header; + + if (netif_running(adapter->netdev)) + atl1_down(adapter); + + rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); + rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : + rfdr->count; + rfdr->count = (rfdr->count + 3) & ~3; + rrdr->count = rfdr->count; + + tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); + tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : + tpdr->count; + tpdr->count = (tpdr->count + 3) & ~3; + + if (netif_running(adapter->netdev)) { + /* try to get new resources before deleting old */ + err = atl1_setup_ring_resources(adapter); + if (err) + goto err_setup_ring; + + /* + * save the new, restore the old in order to free it, + * then restore the new back again + */ + + rfd_new = adapter->rfd_ring; + rrd_new = adapter->rrd_ring; + tpd_new = adapter->tpd_ring; + rhdr_new = adapter->ring_header; + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_free_ring_resources(adapter); + adapter->rfd_ring = rfd_new; + adapter->rrd_ring = rrd_new; + adapter->tpd_ring = tpd_new; + adapter->ring_header = rhdr_new; + + err = atl1_up(adapter); + if (err) + return err; + } + return 0; + +err_setup_ring: + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_up(adapter); + return err; +} + +static void atl1_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + epause->rx_pause = 1; + epause->tx_pause = 1; +} + +static int atl1_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + + epause->rx_pause = 1; + epause->tx_pause = 1; + + return 0; +} + +static u32 atl1_get_rx_csum(struct net_device *netdev) +{ + return 1; +} + +static void atl1_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + memcpy(p, atl1_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static int atl1_nway_reset(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (netif_running(netdev)) { + u16 phy_data; + atl1_down(adapter); + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + } else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: /* MEDIA_TYPE_10M_HALF */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + atl1_up(adapter); + } + return 0; +} + +const struct ethtool_ops atl1_ethtool_ops = { + .get_settings = atl1_get_settings, + .set_settings = atl1_set_settings, + .get_drvinfo = atl1_get_drvinfo, + .get_wol = atl1_get_wol, + .set_wol = atl1_set_wol, + .get_ringparam = atl1_get_ringparam, + .set_ringparam = atl1_set_ringparam, + .get_pauseparam = atl1_get_pauseparam, + .set_pauseparam = atl1_set_pauseparam, + .get_rx_csum = atl1_get_rx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_link = ethtool_op_get_link, + .set_sg = ethtool_op_set_sg, + .get_strings = atl1_get_strings, + .nway_reset = atl1_nway_reset, + .get_ethtool_stats = atl1_get_ethtool_stats, + .get_sset_count = atl1_get_sset_count, + .set_tso = ethtool_op_set_tso, +}; diff --git a/drivers/net/atlx/atl1_hw.c b/drivers/net/atlx/atl1_hw.c new file mode 100644 index 0000000..9d3bd22 --- /dev/null +++ b/drivers/net/atlx/atl1_hw.c @@ -0,0 +1,720 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "atl1.h" + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : ATL1_SUCCESS or idle status (if error) + */ +s32 atl1_reset_hw(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + u32 icr; + int i; + + /* + * Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* + * iowrite32(0, hw->hw_addr + REG_IMR); + * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); + */ + + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); + ioread32(hw->hw_addr + REG_MASTER_CTRL); + + iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE); + ioread16(hw->hw_addr + REG_GPHY_ENABLE); + + msleep(1); /* delay about 1ms */ + + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); + if (!icr) + break; + msleep(1); /* delay 1 ms */ + cpu_relax(); /* FIXME: is this still the right way to do this? */ + } + + if (icr) { + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + return icr; + } + + return ATL1_SUCCESS; +} + +/* function about EEPROM + * + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl1_check_eeprom_exist(struct atl1_hw *hw) +{ + u32 value; + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + } + + value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) +{ + int i; + u32 control; + + if (offset & 3) + return false; /* address do not align */ + + iowrite32(0, hw->hw_addr + REG_VPD_DATA); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + iowrite32(control, hw->hw_addr + REG_VPD_CAP); + ioread32(hw->hw_addr + REG_VPD_CAP); + + for (i = 0; i < 10; i++) { + msleep(2); + control = ioread32(hw->hw_addr + REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); + return true; + } + return false; /* timeout */ +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16) val; + return ATL1_SUCCESS; + } + return ATL1_ERR_PHY; +} + +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 + +static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; + + iowrite32(0, hw->hw_addr + REG_SPI_DATA); + iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & + SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & + SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & + SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & + SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << + SPI_FLASH_CTRL_INS_SHIFT; + + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + + value |= SPI_FLASH_CTRL_START; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + + for (i = 0; i < 10; i++) { + msleep(1); /* 1ms */ + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } + + if (value & SPI_FLASH_CTRL_START) + return false; + + *buf = ioread32(hw->hw_addr + REG_SPI_DATA); + + return true; +} + +/* + * get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1_get_permanent_address(struct atl1_hw *hw) +{ + u32 addr[2]; + u32 i, control; + u16 reg; + u8 eth_addr[ETH_ALEN]; + bool key_valid; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */ + reg = 0; + key_valid = false; + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl1_read_eeprom(hw, i + 0x100, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; /* assume data end while encount an invalid KEYWORD */ + } else + break; /* read error */ + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + return 1; + } + + /* see if SPI FLAGS exist ? */ + addr[0] = addr[1] = 0; + reg = 0; + key_valid = false; + i = 0; + while (1) { + if (atl1_spi_read(hw, i + 0x1f000, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; /* data end */ + } else + break; /* read error */ + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + /* + * On some motherboards, the MAC address is written by the + * BIOS directly to the MAC register during POST, and is + * not stored in eeprom. If all else thus far has failed + * to fetch the permanent MAC address, try reading it directly. + */ + addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); + addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return 1; +} + +/* + * Reads the adapter's MAC address from the EEPROM + * hw - Struct containing variables accessed by shared code + */ +s32 atl1_read_mac_addr(struct atl1_hw *hw) +{ + u16 i; + + if (atl1_get_permanent_address(hw)) + random_ether_addr(hw->perm_mac_addr); + + for (i = 0; i < ETH_ALEN; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return ATL1_SUCCESS; +} + +/* + * Hashes an address to determine its location in the multicast table + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * atl1_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) +{ + u32 crc32, value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + mta |= (1 << hash_bit); + iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return ATL1_SUCCESS; + + return ATL1_ERR_PHY; +} + +/* + * Make L001's PHY out of Power Saving State (bug) + * hw - Struct containing variables accessed by shared code + * when power on, L001's PHY always on Power saving State + * (Gigabit Link forbidden) + */ +static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +{ + s32 ret; + ret = atl1_write_phy_reg(hw, 29, 0x0029); + if (ret) + return ret; + return atl1_write_phy_reg(hw, 30, 0); +} + +/* + *TODO: do something or get rid of this + */ +s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +{ +/* s32 ret_val; + * u16 phy_data; + */ + +/* + ret_val = atl1_write_phy_reg(hw, ...); + ret_val = atl1_write_phy_reg(hw, ...); + .... +*/ + return ATL1_SUCCESS; +} + +/* + * Resets the PHY and make all config validate + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl1_phy_reset(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + u16 phy_data; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + + ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down! */ + dev_dbg(&pdev->dev, "pcie phy link down\n"); + + for (i = 0; i < 25; i++) { + msleep(1); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if ((val & (MDIO_START | MDIO_BUSY)) != 0) { + dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); + return ret_val; + } + } + return ATL1_SUCCESS; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * hw - Struct containing variables accessed by shared code + */ +s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) +{ + s32 ret_val; + s16 mii_autoneg_adv_reg; + s16 mii_1000t_ctrl_reg; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + + /* Read the MII 1000Base-T Control Register (Address 9). */ + mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK; + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; + + /* + * Need to parse media_type and set up + * the appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_1000M_FULL: + mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + break; + + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + break; + + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + break; + + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + + ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + + return ATL1_SUCCESS; +} + +/* + * Configures link settings. + * hw - Struct containing variables accessed by shared code + * Assumes the hardware has previously been reset and the + * transmitter and receiver are not enabled. + */ +static s32 atl1_setup_link(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + + /* + * Options: + * PHY will advertise value(s) parsed from + * autoneg_advertised and fc + * no matter what autoneg is , We will not wait link result. + */ + ret_val = atl1_phy_setup_autoneg_adv(hw); + if (ret_val) { + dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); + return ret_val; + } + /* SW.Reset , En-Auto-Neg if needed */ + ret_val = atl1_phy_reset(hw); + if (ret_val) { + dev_dbg(&pdev->dev, "error resetting phy\n"); + return ret_val; + } + hw->phy_configured = true; + return ret_val; +} + +static struct atl1_spi_flash_dev flash_table[] = { +/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ + {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, + {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, + {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, +}; + +static void atl1_init_flash_opcode(struct atl1_hw *hw) +{ + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + hw->flash_vendor = 0; /* ATMEL */ + + /* Init OP table */ + iowrite8(flash_table[hw->flash_vendor].cmd_program, + hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); + iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, + hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, + hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_rdid, + hw->hw_addr + REG_SPI_FLASH_OP_RDID); + iowrite8(flash_table[hw->flash_vendor].cmd_wren, + hw->hw_addr + REG_SPI_FLASH_OP_WREN); + iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, + hw->hw_addr + REG_SPI_FLASH_OP_RDSR); + iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, + hw->hw_addr + REG_SPI_FLASH_OP_WRSR); + iowrite8(flash_table[hw->flash_vendor].cmd_read, + hw->hw_addr + REG_SPI_FLASH_OP_READ); +} + +/* + * Performs basic configuration of the adapter. + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +s32 atl1_init_hw(struct atl1_hw *hw) +{ + u32 ret_val = 0; + + /* Zero out the Multicast HASH table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + /* clear the old settings from the multicast hash table */ + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + atl1_init_flash_opcode(hw); + + if (!hw->phy_configured) { + /* enable GPHY LinkChange Interrrupt */ + ret_val = atl1_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + /* make PHY out of power-saving state */ + ret_val = atl1_phy_leave_power_saving(hw); + if (ret_val) + return ret_val; + /* Call a subroutine to configure the link */ + ret_val = atl1_setup_link(hw); + } + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + u16 phy_data; + + /* ; --- Read PHY Specific Status Register (17) */ + ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED)) + return ATL1_ERR_PHY_RES; + + switch (phy_data & MII_AT001_PSSR_SPEED) { + case MII_AT001_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_AT001_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_AT001_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + dev_dbg(&pdev->dev, "error getting speed\n"); + return ATL1_ERR_PHY_SPEED; + break; + } + if (phy_data & MII_AT001_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return ATL1_SUCCESS; +} + +void atl1_set_mac_addr(struct atl1_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + /* high dword */ + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); +} diff --git a/drivers/net/atlx/atl1_hw.h b/drivers/net/atlx/atl1_hw.h new file mode 100644 index 0000000..939aa0f --- /dev/null +++ b/drivers/net/atlx/atl1_hw.h @@ -0,0 +1,946 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * There are a lot of defines in here that are unused and/or have cryptic + * names. Please leave them alone, as they're the closest thing we have + * to a spec from Attansic at present. *ahem* -- CHS + */ + +#ifndef _ATL1_HW_H_ +#define _ATL1_HW_H_ + +#include +#include + +struct atl1_adapter; +struct atl1_hw; + +/* function prototypes needed by multiple files */ +s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); +s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); +s32 atl1_read_mac_addr(struct atl1_hw *hw); +s32 atl1_init_hw(struct atl1_hw *hw); +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); +s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); +void atl1_set_mac_addr(struct atl1_hw *hw); +s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); +s32 atl1_reset_hw(struct atl1_hw *hw); +void atl1_check_options(struct atl1_adapter *adapter); + +/* register definitions */ +#define REG_PCIE_CAP_LIST 0x58 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xff +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_SPI_FLASH_CTRL 0x200 +#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 +#define SPI_FLASH_CTRL_STS_WEN 0x2 +#define SPI_FLASH_CTRL_STS_WPEN 0x80 +#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF +#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 +#define SPI_FLASH_CTRL_INS_MASK 0x7 +#define SPI_FLASH_CTRL_INS_SHIFT 8 +#define SPI_FLASH_CTRL_START 0x800 +#define SPI_FLASH_CTRL_EN_VPD 0x2000 +#define SPI_FLASH_CTRL_LDSTART 0x8000 +#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 +#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 +#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 +#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 +#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 +#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 +#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 +#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 +#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 + +#define REG_SPI_ADDR 0x204 + +#define REG_SPI_DATA 0x208 + +#define REG_SPI_FLASH_CONFIG 0x20C +#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF +#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 +#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 +#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 +#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 + +#define REG_SPI_FLASH_OP_PROGRAM 0x210 +#define REG_SPI_FLASH_OP_SC_ERASE 0x211 +#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 +#define REG_SPI_FLASH_OP_RDID 0x213 +#define REG_SPI_FLASH_OP_WREN 0x214 +#define REG_SPI_FLASH_OP_RDSR 0x215 +#define REG_SPI_FLASH_OP_WRSR 0x216 +#define REG_SPI_FLASH_OP_READ 0x217 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 + +/* Selene Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_MTIMER_EN 0x2 +#define MASTER_CTRL_ITIMER_EN 0x4 +#define MASTER_CTRL_MANUAL_INT 0x8 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xff +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0xff + +/* Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + +/* IRQ ModeratorTimer Initial Value Register */ +#define REG_IRQ_MODU_TIMER_INIT 0x1408 + +#define REG_GPHY_ENABLE 0x140C + +/* IRQ Anti-Lost Timer Initial Value Register */ +#define REG_CMBDISDMA_TIMER 0x140E + +/* Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 +#define IDLE_STATUS_RXMAC 1 +#define IDLE_STATUS_TXMAC 2 +#define IDLE_STATUS_RXQ 4 +#define IDLE_STATUS_TXQ 8 +#define IDLE_STATUS_DMAR 0x10 +#define IDLE_STATUS_DMAW 0x20 +#define IDLE_STATUS_SMB 0x40 +#define IDLE_STATUS_CMB 0x80 + +/* MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xffff +#define MDIO_DATA_SHIFT 0 +#define MDIO_REG_ADDR_MASK 0x1f +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 +#define MDIO_SUP_PREAMBLE 0x400000 +#define MDIO_START 0x800000 +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 +#define MDIO_WAIT_TIMES 30 + +/* MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 + +/* BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141c +#define BIST0_NOW 0x1 +#define BIST0_SRAM_FAIL 0x2 +#define BIST0_FUSE_FLAG 0x4 +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 +#define BIST1_SRAM_FAIL 0x2 +#define BIST1_FUSE_FLAG 0x4 + +/* MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 1 +#define MAC_CTRL_RX_EN 2 +#define MAC_CTRL_TX_FLOW 4 +#define MAC_CTRL_RX_FLOW 8 +#define MAC_CTRL_LOOPBACK 0x10 +#define MAC_CTRL_DUPLX 0x20 +#define MAC_CTRL_ADD_CRC 0x40 +#define MAC_CTRL_PAD 0x80 +#define MAC_CTRL_LENCHK 0x100 +#define MAC_CTRL_HUGE_EN 0x200 +#define MAC_CTRL_PRMLEN_SHIFT 10 +#define MAC_CTRL_PRMLEN_MASK 0xf +#define MAC_CTRL_RMV_VLAN 0x4000 +#define MAC_CTRL_PROMIS_EN 0x8000 +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x300000 +#define MAC_CTRL_SPEED_1000 2 +#define MAC_CTRL_SPEED_10_100 1 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_MC_ALL_EN 0x2000000 +#define MAC_CTRL_BC_EN 0x4000000 +#define MAC_CTRL_DBG 0x8000000 + +/* MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 +#define MAC_IPG_IFG_IPGT_MASK 0x7f +#define MAC_IPG_IFG_MIFG_SHIFT 8 +#define MAC_IPG_IFG_MIFG_MASK 0xff +#define MAC_IPG_IFG_IPGR1_SHIFT 16 +#define MAC_IPG_IFG_IPGR1_MASK 0x7f +#define MAC_IPG_IFG_IPGR2_SHIFT 24 +#define MAC_IPG_IFG_IPGR2_MASK 0x7f + +/* MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/* Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + +/* MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf + +/* Maximum Frame Length Control Register */ +#define REG_MTU 0x149c + +/* Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14a0 +#define WOL_PATTERN_EN 0x00000001 +#define WOL_PATTERN_PME_EN 0x00000002 +#define WOL_MAGIC_EN 0x00000004 +#define WOL_MAGIC_PME_EN 0x00000008 +#define WOL_LINK_CHG_EN 0x00000010 +#define WOL_LINK_CHG_PME_EN 0x00000020 +#define WOL_PATTERN_ST 0x00000100 +#define WOL_MAGIC_ST 0x00000200 +#define WOL_LINKCHG_ST 0x00000400 +#define WOL_CLK_SWITCH_EN 0x00008000 +#define WOL_PT0_EN 0x00010000 +#define WOL_PT1_EN 0x00020000 +#define WOL_PT2_EN 0x00040000 +#define WOL_PT3_EN 0x00080000 +#define WOL_PT4_EN 0x00100000 +#define WOL_PT5_EN 0x00200000 +#define WOL_PT6_EN 0x00400000 + +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14a4 +#define WOL_PT_LEN_MASK 0x7f +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Register */ +#define REG_SRAM_RFD_ADDR 0x1500 +#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4) +#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8) +#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12) +#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16) +#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20) +#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24) +#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28) +#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32) +#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36) +#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40) +#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44) +#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48) +#define SRAM_TCPH_ADDR_MASK 0x0fff +#define SRAM_TCPH_ADDR_SHIFT 0 +#define SRAM_PATH_ADDR_MASK 0x0fff +#define SRAM_PATH_ADDR_SHIFT 16 + +/* Load Ptr Register */ +#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52) + +/* Descriptor Control register */ +#define REG_DESC_BASE_ADDR_HI 0x1540 +#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4) +#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8) +#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12) +#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16) +#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20) +#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24) +#define DESC_RFD_RING_SIZE_MASK 0x7ff +#define DESC_RFD_RING_SIZE_SHIFT 0 +#define DESC_RRD_RING_SIZE_MASK 0x7ff +#define DESC_RRD_RING_SIZE_SHIFT 16 +#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28) +#define DESC_TPD_RING_SIZE_MASK 0x3ff +#define DESC_TPD_RING_SIZE_SHIFT 0 + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1580 +#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 +#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 +#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f +#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 +#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 +#define TX_JUMBO_TASK_TH_MASK 0x7ff +#define TX_JUMBO_TASK_TH_SHIFT 0 +#define TX_TPD_MIN_IPG_MASK 0x1f +#define TX_TPD_MIN_IPG_SHIFT 16 + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15a0 +#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 +#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff +#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 +#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff +#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 +#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f +#define RXQ_CTRL_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +/* Rx jumbo packet threshold and rrd retirement timer */ +#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4) +#define RXQ_JMBOSZ_TH_MASK 0x7ff +#define RXQ_JMBOSZ_TH_SHIFT 0 +#define RXQ_JMBO_LKAH_MASK 0xf +#define RXQ_JMBO_LKAH_SHIFT 11 +#define RXQ_RRD_TIMER_MASK 0xffff +#define RXQ_RRD_TIMER_SHIFT 16 + +/* RFD flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8) +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff + +/* RRD flow control register */ +#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12) +#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff +#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15c0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAR_EN 0x400 +#define DMA_CTRL_DMAW_EN 0x800 + +/* CMB/SMB Control Register */ +#define REG_CSMB_CTRL 0x15d0 +#define CSMB_CTRL_CMB_NOW 1 +#define CSMB_CTRL_SMB_NOW 2 +#define CSMB_CTRL_CMB_EN 4 +#define CSMB_CTRL_SMB_EN 8 + +/* CMB DMA Write Threshold Register */ +#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4) +#define CMB_RRD_TH_SHIFT 0 +#define CMB_RRD_TH_MASK 0x7ff +#define CMB_TPD_TH_SHIFT 16 +#define CMB_TPD_TH_MASK 0x7ff + +/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */ +#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8) +#define CMB_RX_TM_SHIFT 0 +#define CMB_RX_TM_MASK 0xffff +#define CMB_TX_TM_SHIFT 16 +#define CMB_TX_TM_MASK 0xffff + +/* Number of packet received since last CMB write */ +#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12) + +/* Number of packet transmitted since last CMB write */ +#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16) + +/* SMB auto DMA timer register */ +#define REG_SMB_TIMER (REG_CSMB_CTRL+20) + +/* Mailbox Register */ +#define REG_MAILBOX 0x15f0 +#define MB_RFD_PROD_INDX_SHIFT 0 +#define MB_RFD_PROD_INDX_MASK 0x7ff +#define MB_RRD_CONS_INDX_SHIFT 11 +#define MB_RRD_CONS_INDX_MASK 0x7ff +#define MB_TPD_PROD_INDX_SHIFT 22 +#define MB_TPD_PROD_INDX_MASK 0x3ff + +/* Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_SMB 1 +#define ISR_TIMER 2 +#define ISR_MANUAL 4 +#define ISR_RXF_OV 8 +#define ISR_RFD_UNRUN 0x10 +#define ISR_RRD_OV 0x20 +#define ISR_TXF_UNRUN 0x40 +#define ISR_LINK 0x80 +#define ISR_HOST_RFD_UNRUN 0x100 +#define ISR_HOST_RRD_OV 0x200 +#define ISR_DMAR_TO_RST 0x400 +#define ISR_DMAW_TO_RST 0x800 +#define ISR_GPHY 0x1000 +#define ISR_RX_PKT 0x10000 +#define ISR_TX_PKT 0x20000 +#define ISR_TX_DMA 0x40000 +#define ISR_RX_DMA 0x80000 +#define ISR_CMB_RX 0x100000 +#define ISR_CMB_TX 0x200000 +#define ISR_MAC_RX 0x400000 +#define ISR_MAC_TX 0x800000 +#define ISR_UR_DETECTED 0x1000000 +#define ISR_FERR_DETECTED 0x2000000 +#define ISR_NFERR_DETECTED 0x4000000 +#define ISR_CERR_DETECTED 0x8000000 +#define ISR_PHY_LINKDOWN 0x10000000 +#define ISR_DIS_SMB 0x20000000 +#define ISR_DIS_DMA 0x40000000 +#define ISR_DIS_INT 0x80000000 + +/* Interrupt Mask Register */ +#define REG_IMR 0x1604 + +/* Normal Interrupt mask */ +#define IMR_NORMAL_MASK (\ + ISR_SMB |\ + ISR_GPHY |\ + ISR_PHY_LINKDOWN|\ + ISR_DMAR_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_CMB_TX |\ + ISR_CMB_RX ) + +/* Debug Interrupt Mask (enable all interrupt) */ +#define IMR_DEBUG_MASK (\ + ISR_SMB |\ + ISR_TIMER |\ + ISR_MANUAL |\ + ISR_RXF_OV |\ + ISR_RFD_UNRUN |\ + ISR_RRD_OV |\ + ISR_TXF_UNRUN |\ + ISR_LINK |\ + ISR_CMB_TX |\ + ISR_CMB_RX |\ + ISR_RX_PKT |\ + ISR_TX_PKT |\ + ISR_MAC_RX |\ + ISR_MAC_TX ) + +/* Interrupt Status Register */ +#define REG_RFD_RRD_IDX 0x1800 +#define REG_TPD_IDX 0x1804 + +/* MII definition */ +/* PHY Common Register */ +#define MII_AT001_CR 0x09 +#define MII_AT001_SR 0x0A +#define MII_AT001_ESR 0x0F +#define MII_AT001_PSCR 0x10 +#define MII_AT001_PSSR 0x11 + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_MASK 0x2040 +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Link partner ability register. */ +#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ +#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ +#define MII_LPA_PAUSE 0x0400 /* PAUSE */ +#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ +#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ +#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ +#define MII_LPA_NPAGE 0x8000 /* Next page bit */ + +/* Autoneg Advertisement Register */ +#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ +#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define MII_AR_SPEED_MASK 0x01E0 +#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 + +/* 1000BASE-T Control Register */ +#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */ +#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */ +#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */ +#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 +#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 + +/* 1000BASE-T Status Register */ +#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 + +/* Extended Status Register */ +#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +/* AT001 PHY Specific Control Register */ +#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 +#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */ +#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */ +#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */ +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */ +#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ +#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ +#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 +#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 + +/* AT001 PHY Specific Status Register */ +#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +/* PCI Command Register Bit Definitions */ +#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ +#define CMD_IO_SPACE 0x0001 +#define CMD_MEMORY_SPACE 0x0002 +#define CMD_BUS_MASTER 0x0004 + +/* Wake Up Filter Control */ +#define ATL1_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define ATL1_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define ATL1_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define ATL1_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define ATL1_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +/* Error Codes */ +#define ATL1_SUCCESS 0 +#define ATL1_ERR_EEPROM 1 +#define ATL1_ERR_PHY 2 +#define ATL1_ERR_CONFIG 3 +#define ATL1_ERR_PARAM 4 +#define ATL1_ERR_MAC_TYPE 5 +#define ATL1_ERR_PHY_TYPE 6 +#define ATL1_ERR_PHY_SPEED 7 +#define ATL1_ERR_PHY_RES 8 + +#define SPEED_0 0xffff +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#define MEDIA_TYPE_AUTO_SENSOR 0 +#define MEDIA_TYPE_1000M_FULL 1 +#define MEDIA_TYPE_100M_FULL 2 +#define MEDIA_TYPE_100M_HALF 3 +#define MEDIA_TYPE_10M_FULL 4 +#define MEDIA_TYPE_10M_HALF 5 + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 +#define ADVERTISE_1000_FULL 0x0020 +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ +#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ +#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ + +#define MAX_JUMBO_FRAME_SIZE 0x2800 + +#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ + +/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */ +#define EEPROM_SUM 0xBABA + +#define ATL1_EEDUMP_LEN 48 + +/* Statistics counters collected by the MAC */ +struct stats_msg_block { + /* rx */ + u32 rx_ok; /* The number of good packet received. */ + u32 rx_bcast; /* The number of good broadcast packet received. */ + u32 rx_mcast; /* The number of good multicast packet received. */ + u32 rx_pause; /* The number of Pause packet received. */ + u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */ + u32 rx_fcs_err; /* The number of packets with bad FCS. */ + u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */ + u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ + u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ + u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ + u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ + u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ + u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ + u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ + u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ + u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ + u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ + u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */ + u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ + u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ + u32 rx_align_err; /* Alignment Error */ + u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ + u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ + u32 rx_err_addr; /* The number of packets dropped due to address filtering. */ + + /* tx */ + u32 tx_ok; /* The number of good packet transmitted. */ + u32 tx_bcast; /* The number of good broadcast packet transmitted. */ + u32 tx_mcast; /* The number of good multicast packet transmitted. */ + u32 tx_pause; /* The number of Pause packet transmitted. */ + u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ + u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ + u32 tx_defer; /* The number of packets transmitted that is deferred. */ + u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ + u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ + u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ + u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ + u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ + u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ + u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ + u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ + u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + u32 tx_late_col; /* The number of packets transmitted with late collisions. */ + u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ + u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ + u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ + u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ + u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ + u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ + u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update. + * Software should clear this bit as soon as retrieving the statistics information. */ +}; + +/* Coalescing Message Block */ +struct coals_msg_block { + u32 int_stats; /* interrupt status */ + u16 rrd_prod_idx; /* TRD Producer Index. */ + u16 rfd_cons_idx; /* RFD Consumer Index. */ + u16 update; /* Selene sets this bit every time it DMA the CMB to host memory. + * Software supposes to clear this bit when CMB information is processed. */ + u16 tpd_cons_idx; /* TPD Consumer Index. */ +}; + +/* RRD descriptor */ +struct rx_return_desc { + u8 num_buf; /* Number of RFD buffers used by the received packet */ + u8 resved; + u16 buf_indx; /* RFD Index of the first buffer */ + union { + u32 valid; + struct { + u16 rx_chksum; + u16 pkt_size; + } xsum_sz; + } xsz; + + u16 pkt_flg; /* Packet flags */ + u16 err_flg; /* Error flags */ + u16 resved2; + u16 vlan_tag; /* VLAN TAG */ +}; + +#define PACKET_FLAG_ETH_TYPE 0x0080 +#define PACKET_FLAG_VLAN_INS 0x0100 +#define PACKET_FLAG_ERR 0x0200 +#define PACKET_FLAG_IPV4 0x0400 +#define PACKET_FLAG_UDP 0x0800 +#define PACKET_FLAG_TCP 0x1000 +#define PACKET_FLAG_BCAST 0x2000 +#define PACKET_FLAG_MCAST 0x4000 +#define PACKET_FLAG_PAUSE 0x8000 + +#define ERR_FLAG_CRC 0x0001 +#define ERR_FLAG_CODE 0x0002 +#define ERR_FLAG_DRIBBLE 0x0004 +#define ERR_FLAG_RUNT 0x0008 +#define ERR_FLAG_OV 0x0010 +#define ERR_FLAG_TRUNC 0x0020 +#define ERR_FLAG_IP_CHKSUM 0x0040 +#define ERR_FLAG_L4_CHKSUM 0x0080 +#define ERR_FLAG_LEN 0x0100 +#define ERR_FLAG_DES_ADDR 0x0200 + +/* RFD descriptor */ +struct rx_free_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 buf_len; /* Size of the receive buffer in host memory, in byte */ + u16 coalese; /* Update consumer index to host after the reception of this frame */ + /* __attribute__ ((packed)) is required */ +} __attribute__ ((packed)); + +/* tsopu defines */ +#define TSO_PARAM_BUFLEN_MASK 0x3FFF +#define TSO_PARAM_BUFLEN_SHIFT 0 +#define TSO_PARAM_DMAINT_MASK 0x0001 +#define TSO_PARAM_DMAINT_SHIFT 14 +#define TSO_PARAM_PKTNT_MASK 0x0001 +#define TSO_PARAM_PKTINT_SHIFT 15 +#define TSO_PARAM_VLANTAG_MASK 0xFFFF +#define TSO_PARAM_VLAN_SHIFT 16 + +/* tsopl defines */ +#define TSO_PARAM_EOP_MASK 0x0001 +#define TSO_PARAM_EOP_SHIFT 0 +#define TSO_PARAM_COALESCE_MASK 0x0001 +#define TSO_PARAM_COALESCE_SHIFT 1 +#define TSO_PARAM_INSVLAG_MASK 0x0001 +#define TSO_PARAM_INSVLAG_SHIFT 2 +#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001 +#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3 +#define TSO_PARAM_SEGMENT_MASK 0x0001 +#define TSO_PARAM_SEGMENT_SHIFT 4 +#define TSO_PARAM_IPCKSUM_MASK 0x0001 +#define TSO_PARAM_IPCKSUM_SHIFT 5 +#define TSO_PARAM_TCPCKSUM_MASK 0x0001 +#define TSO_PARAM_TCPCKSUM_SHIFT 6 +#define TSO_PARAM_UDPCKSUM_MASK 0x0001 +#define TSO_PARAM_UDPCKSUM_SHIFT 7 +#define TSO_PARAM_VLANTAGGED_MASK 0x0001 +#define TSO_PARAM_VLANTAGGED_SHIFT 8 +#define TSO_PARAM_ETHTYPE_MASK 0x0001 +#define TSO_PARAM_ETHTYPE_SHIFT 9 +#define TSO_PARAM_IPHL_MASK 0x000F +#define TSO_PARAM_IPHL_SHIFT 10 +#define TSO_PARAM_TCPHDRLEN_MASK 0x000F +#define TSO_PARAM_TCPHDRLEN_SHIFT 14 +#define TSO_PARAM_HDRFLAG_MASK 0x0001 +#define TSO_PARAM_HDRFLAG_SHIFT 18 +#define TSO_PARAM_MSS_MASK 0x1FFF +#define TSO_PARAM_MSS_SHIFT 19 + +/* csumpu defines */ +#define CSUM_PARAM_BUFLEN_MASK 0x3FFF +#define CSUM_PARAM_BUFLEN_SHIFT 0 +#define CSUM_PARAM_DMAINT_MASK 0x0001 +#define CSUM_PARAM_DMAINT_SHIFT 14 +#define CSUM_PARAM_PKTINT_MASK 0x0001 +#define CSUM_PARAM_PKTINT_SHIFT 15 +#define CSUM_PARAM_VALANTAG_MASK 0xFFFF +#define CSUM_PARAM_VALAN_SHIFT 16 + +/* csumpl defines*/ +#define CSUM_PARAM_EOP_MASK 0x0001 +#define CSUM_PARAM_EOP_SHIFT 0 +#define CSUM_PARAM_COALESCE_MASK 0x0001 +#define CSUM_PARAM_COALESCE_SHIFT 1 +#define CSUM_PARAM_INSVLAG_MASK 0x0001 +#define CSUM_PARAM_INSVLAG_SHIFT 2 +#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001 +#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3 +#define CSUM_PARAM_SEGMENT_MASK 0x0001 +#define CSUM_PARAM_SEGMENT_SHIFT 4 +#define CSUM_PARAM_IPCKSUM_MASK 0x0001 +#define CSUM_PARAM_IPCKSUM_SHIFT 5 +#define CSUM_PARAM_TCPCKSUM_MASK 0x0001 +#define CSUM_PARAM_TCPCKSUM_SHIFT 6 +#define CSUM_PARAM_UDPCKSUM_MASK 0x0001 +#define CSUM_PARAM_UDPCKSUM_SHIFT 7 +#define CSUM_PARAM_VLANTAGGED_MASK 0x0001 +#define CSUM_PARAM_VLANTAGGED_SHIFT 8 +#define CSUM_PARAM_ETHTYPE_MASK 0x0001 +#define CSUM_PARAM_ETHTYPE_SHIFT 9 +#define CSUM_PARAM_IPHL_MASK 0x000F +#define CSUM_PARAM_IPHL_SHIFT 10 +#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF +#define CSUM_PARAM_PLOADOFFSET_SHIFT 16 +#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF +#define CSUM_PARAM_XSUMOFFSET_SHIFT 24 + +/* TPD descriptor */ +struct tso_param { + /* The order of these declarations is important -- don't change it */ + u32 tsopu; /* tso_param upper word */ + u32 tsopl; /* tso_param lower word */ +}; + +struct csum_param { + /* The order of these declarations is important -- don't change it */ + u32 csumpu; /* csum_param upper word */ + u32 csumpl; /* csum_param lower word */ +}; + +union tpd_descr { + u64 data; + struct csum_param csum; + struct tso_param tso; +}; + +struct tx_packet_desc { + __le64 buffer_addr; + union tpd_descr desc; +}; + +/* DMA Order Settings */ +enum atl1_dma_order { + atl1_dma_ord_in = 1, + atl1_dma_ord_enh = 2, + atl1_dma_ord_out = 4 +}; + +enum atl1_dma_rcb { + atl1_rcb_64 = 0, + atl1_rcb_128 = 1 +}; + +enum atl1_dma_req_block { + atl1_dma_req_128 = 0, + atl1_dma_req_256 = 1, + atl1_dma_req_512 = 2, + atl1_dma_req_1024 = 3, + atl1_dma_req_2048 = 4, + atl1_dma_req_4096 = 5 +}; + +struct atl1_spi_flash_dev { + const char *manu_name; /* manufacturer id */ + /* op-code */ + u8 cmd_wrsr; + u8 cmd_read; + u8 cmd_program; + u8 cmd_wren; + u8 cmd_wrdi; + u8 cmd_rdsr; + u8 cmd_rdid; + u8 cmd_sector_erase; + u8 cmd_chip_erase; +}; + +#endif /* _ATL1_HW_H_ */ diff --git a/drivers/net/atlx/atl1_main.c b/drivers/net/atlx/atl1_main.c new file mode 100644 index 0000000..9200ee5 --- /dev/null +++ b/drivers/net/atlx/atl1_main.c @@ -0,0 +1,2453 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called COPYING. + * + * Contact Information: + * Xiong Huang + * Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei, + * Xinzhu 302, TAIWAN, REPUBLIC OF CHINA + * + * Chris Snook + * Jay Cliburn + * + * This version is adapted from the Attansic reference driver for + * inclusion in the Linux kernel. It is currently under heavy development. + * A very incomplete list of things that need to be dealt with: + * + * TODO: + * Fix TSO; tx performance is horrible with TSO enabled. + * Wake on LAN. + * Add more ethtool functions. + * Fix abstruse irq enable/disable condition described here: + * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 + * + * NEEDS TESTING: + * VLAN + * multicast + * promiscuous mode + * interrupt coalescing + * SMP torture testing + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "atl1.h" + +#define DRIVER_VERSION "2.0.7" + +char atl1_driver_name[] = "atl1"; +static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver"; +static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation."; +char atl1_driver_version[] = DRIVER_VERSION; + +MODULE_AUTHOR + ("Attansic Corporation , Chris Snook , Jay Cliburn "); +MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); + +/* + * atl1_pci_tbl - PCI Device ID Table + */ +static const struct pci_device_id atl1_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, + /* required last entry */ + {0,} +}; + +MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); + +/* + * atl1_sw_init - Initialize general software structures (struct atl1_adapter) + * @adapter: board private structure to initialize + * + * atl1_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1_sw_init(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + adapter->wol = 0; + adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; + adapter->ict = 50000; /* 100ms */ + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; + + hw->phy_configured = false; + hw->preamble_len = 7; + hw->ipgt = 0x60; + hw->min_ifg = 0x50; + hw->ipgr1 = 0x40; + hw->ipgr2 = 0x60; + hw->max_retry = 0xf; + hw->lcol = 0x37; + hw->jam_ipg = 7; + hw->rfd_burst = 8; + hw->rrd_burst = 8; + hw->rfd_fetch_gap = 1; + hw->rx_jumbo_th = adapter->rx_buffer_len / 8; + hw->rx_jumbo_lkah = 1; + hw->rrd_ret_timer = 16; + hw->tpd_burst = 4; + hw->tpd_fetch_th = 16; + hw->txf_burst = 0x100; + hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; + hw->tpd_fetch_gap = 1; + hw->rcb_value = atl1_rcb_64; + hw->dma_ord = atl1_dma_ord_enh; + hw->dmar_block = atl1_dma_req_256; + hw->dmaw_block = atl1_dma_req_256; + hw->cmb_rrd = 4; + hw->cmb_tpd = 4; + hw->cmb_rx_timer = 1; /* about 2us */ + hw->cmb_tx_timer = 1; /* about 2us */ + hw->smb_timer = 100000; /* about 200ms */ + + spin_lock_init(&adapter->lock); + spin_lock_init(&adapter->mb_lock); + + return 0; +} + +static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); + + return result; +} + +static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, + int val) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + atl1_write_phy_reg(&adapter->hw, reg_num, val); +} + +/* + * atl1_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + int retval; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->lock, flags); + retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); + spin_unlock_irqrestore(&adapter->lock, flags); + + return retval; +} + +/* + * atl1_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atl1_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +/* + * atl1_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + struct pci_dev *pdev = adapter->pdev; + int size; + u8 offset = 0; + + size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); + goto err_nomem; + } + rfd_ring->buffer_info = + (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); + + /* real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional 40 bytes tacked onto the end. + */ + ring_header->size = size = + sizeof(struct tx_packet_desc) * tpd_ring->count + + sizeof(struct rx_free_desc) * rfd_ring->count + + sizeof(struct rx_return_desc) * rrd_ring->count + + sizeof(struct coals_msg_block) + + sizeof(struct stats_msg_block) + + 40; + + ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, + &ring_header->dma); + if (unlikely(!ring_header->desc)) { + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); + goto err_nomem; + } + + memset(ring_header->desc, 0, ring_header->size); + + /* init TPD ring */ + tpd_ring->dma = ring_header->dma; + offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; + tpd_ring->dma += offset; + tpd_ring->desc = (u8 *) ring_header->desc + offset; + tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; + + /* init RFD ring */ + rfd_ring->dma = tpd_ring->dma + tpd_ring->size; + offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; + rfd_ring->dma += offset; + rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); + rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; + + + /* init RRD ring */ + rrd_ring->dma = rfd_ring->dma + rfd_ring->size; + offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; + rrd_ring->dma += offset; + rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); + rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; + + + /* init CMB */ + adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; + offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; + adapter->cmb.dma += offset; + adapter->cmb.cmb = (struct coals_msg_block *) + ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); + + /* init SMB */ + adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); + offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; + adapter->smb.dma += offset; + adapter->smb.smb = (struct stats_msg_block *) + ((u8 *) adapter->cmb.cmb + + (sizeof(struct coals_msg_block) + offset)); + + return ATL1_SUCCESS; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; +} + +static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/* + * atl1_clean_rx_ring - Free RFD Buffers + * @adapter: board private structure + */ +static void atl1_clean_rx_ring(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rfd_ring->count; i++) { + buffer_info = &rfd_ring->buffer_info[i]; + if (buffer_info->dma) { + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; + } + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * rfd_ring->count; + memset(rfd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rfd_ring->desc, 0, rfd_ring->size); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/* + * atl1_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + */ +static void atl1_clean_tx_ring(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->dma) { + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } + } + + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * tpd_ring->count; + memset(tpd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tpd_ring->desc, 0, tpd_ring->size); + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); +} + +/* + * atl1_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +void atl1_free_ring_resources(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); + + kfree(tpd_ring->buffer_info); + pci_free_consistent(pdev, ring_header->size, ring_header->desc, + ring_header->dma); + + tpd_ring->buffer_info = NULL; + tpd_ring->desc = NULL; + tpd_ring->dma = 0; + + rfd_ring->buffer_info = NULL; + rfd_ring->desc = NULL; + rfd_ring->dma = 0; + + rrd_ring->desc = NULL; + rrd_ring->dma = 0; +} + +static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) +{ + u32 value; + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + /* duplex */ + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + /* speed */ + value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << + MAC_CTRL_SPEED_SHIFT); + /* flow control */ + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + /* PAD & CRC */ + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + /* preamble length */ + value |= (((u32) adapter->hw.preamble_len + & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + /* vlan */ + if (adapter->vlgrp) + value |= MAC_CTRL_RMV_VLAN; + /* rx checksum + if (adapter->rx_csum) + value |= MAC_CTRL_RX_CHKSUM_EN; + */ + /* filter mode */ + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + /* value |= MAC_CTRL_LOOPBACK; */ + iowrite32(value, hw->hw_addr + REG_MAC_CTRL); +} + +/* + * atl1_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atl1_set_mac(struct net_device *netdev, void *p) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (netif_running(netdev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atl1_set_mac_addr(&adapter->hw); + return 0; +} + +static u32 atl1_check_link(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 ret_val; + u16 speed, duplex, phy_data; + int reconfig = 0; + + /* MII_BMSR must read twice */ + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + if (!(phy_data & BMSR_LSTATUS)) { /* link down */ + if (netif_carrier_ok(netdev)) { /* old link state: Up */ + dev_info(&adapter->pdev->dev, "link is down\n"); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + return ATL1_SUCCESS; + } + + /* Link Up */ + ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) + return ret_val; + + switch (hw->media_type) { + case MEDIA_TYPE_1000M_FULL: + if (speed != SPEED_1000 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_FULL: + if (speed != SPEED_100 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_HALF: + if (speed != SPEED_100 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_FULL: + if (speed != SPEED_10 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_HALF: + if (speed != SPEED_10 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + } + + /* link result is our setting */ + if (!reconfig) { + if (adapter->link_speed != speed + || adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1_setup_mac_ctrl(adapter); + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); + } + if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + return ATL1_SUCCESS; + } + + /* change orignal link status */ + if (netif_carrier_ok(netdev)) { + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + + if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && + hw->media_type != MEDIA_TYPE_1000M_FULL) { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + return ATL1_SUCCESS; + } + + /* auto-neg, insert timer to re-config phy */ + if (!adapter->phy_timer_pending) { + adapter->phy_timer_pending = true; + mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); + } + + return ATL1_SUCCESS; +} + +static void atl1_check_for_link(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 phy_data = 0; + + spin_lock(&adapter->lock); + adapter->phy_timer_pending = false; + atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->lock); + + /* notify upper layer link down ASAP */ + if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ + if (netif_carrier_ok(netdev)) { /* old link state: Up */ + dev_info(&adapter->pdev->dev, "%s link is down\n", + netdev->name); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } + schedule_work(&adapter->link_chg_task); +} + +/* + * atl1_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atl1_set_multi(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u32 rctl; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); + if (netdev->flags & IFF_PROMISC) + rctl |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) { + rctl |= MAC_CTRL_MC_ALL_EN; + rctl &= ~MAC_CTRL_PROMIS_EN; + } else + rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + + iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); + + /* clear the old settings from the multicast hash table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + /* compute mc addresses' hash value ,and put it into hash table */ + for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { + hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr); + atl1_hash_set(hw, hash_value); + } +} + +/* + * atl1_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + + adapter->hw.max_frame_size = max_frame; + adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; + adapter->rx_buffer_len = (max_frame + 7) & ~7; + adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; + + netdev->mtu = new_mtu; + if ((old_mtu != new_mtu) && netif_running(netdev)) { + atl1_down(adapter); + atl1_up(adapter); + } + + return 0; +} + +static void set_flow_ctrl_old(struct atl1_adapter *adapter) +{ + u32 hi, lo, value; + + /* RFD Flow Control */ + value = adapter->rfd_ring.count; + hi = value / 16; + if (hi < 2) + hi = 2; + lo = value * 7 / 8; + + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = adapter->rrd_ring.count; + lo = value / 16; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +static void set_flow_ctrl_new(struct atl1_hw *hw) +{ + u32 hi, lo, value; + + /* RXF Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); + lo = value / 16; + if (lo < 192) + lo = 192; + hi = value * 7 / 8; + if (hi < lo) + hi = lo + 16; + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); + lo = value / 8; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + if (hi < lo) + hi = lo + 3; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +/* + * atl1_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static u32 atl1_configure(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + u32 value; + + /* clear interrupt status */ + iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); + + /* set MAC Address */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | + (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + + /* tx / rx ring */ + + /* HI base address */ + iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), + hw->hw_addr + REG_DESC_BASE_ADDR_HI); + /* LO base address */ + iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RFD_ADDR_LO); + iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RRD_ADDR_LO); + iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_TPD_ADDR_LO); + iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_CMB_ADDR_LO); + iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_SMB_ADDR_LO); + + /* element count */ + value = adapter->rrd_ring.count; + value <<= 16; + value += adapter->rfd_ring.count; + iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); + iowrite32(adapter->tpd_ring.count, hw->hw_addr + + REG_DESC_TPD_RING_SIZE); + + /* Load Ptr */ + iowrite32(1, hw->hw_addr + REG_LOAD_PTR); + + /* config Mailbox */ + value = ((atomic_read(&adapter->tpd_ring.next_to_use) + & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | + ((atomic_read(&adapter->rrd_ring.next_to_clean) + & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | + ((atomic_read(&adapter->rfd_ring.next_to_use) + & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAILBOX); + + /* config IPG/IFG */ + value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) + << MAC_IPG_IFG_IPGT_SHIFT) | + (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) + << MAC_IPG_IFG_MIFG_SHIFT) | + (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) + << MAC_IPG_IFG_IPGR1_SHIFT) | + (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) + << MAC_IPG_IFG_IPGR2_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); + + /* config Half-Duplex Control */ + value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | + (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) + << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | + MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | + (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | + (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) + << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); + + /* set Interrupt Moderator Timer */ + iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); + iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); + + /* set Interrupt Clear Timer */ + iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); + + /* set max frame size hw will accept */ + iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); + + /* jumbo size & rrd retirement timer */ + value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) + << RXQ_JMBOSZ_TH_SHIFT) | + (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) + << RXQ_JMBO_LKAH_SHIFT) | + (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) + << RXQ_RRD_TIMER_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); + + /* Flow Control */ + switch (hw->dev_rev) { + case 0x8001: + case 0x9001: + case 0x9002: + case 0x9003: + set_flow_ctrl_old(adapter); + break; + default: + set_flow_ctrl_new(hw); + break; + } + + /* config TXQ */ + value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) + << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | + (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) + << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | + (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) + << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | + TXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); + + /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ + value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) + << TX_JUMBO_TASK_TH_SHIFT) | + (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) + << TX_TPD_MIN_IPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); + + /* config RXQ */ + value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) + << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | + (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) + << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | + (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) + << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | + RXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); + + /* config DMA Engine */ + value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | + ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | + DMA_CTRL_DMAW_EN; + value |= (u32) hw->dma_ord; + if (atl1_rcb_128 == hw->rcb_value) + value |= DMA_CTRL_RCB_VALUE; + iowrite32(value, hw->hw_addr + REG_DMA_CTRL); + + /* config CMB / SMB */ + value = (hw->cmb_tpd > adapter->tpd_ring.count) ? + hw->cmb_tpd : adapter->tpd_ring.count; + value <<= 16; + value |= hw->cmb_rrd; + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); + value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); + iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); + + /* --- enable CMB / SMB */ + value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; + iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); + + value = ioread32(adapter->hw.hw_addr + REG_ISR); + if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) + value = 1; /* config failed */ + else + value = 0; + + /* clear all interrupt status */ + iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); + iowrite32(0, adapter->hw.hw_addr + REG_ISR); + return value; +} + +/* + * atl1_pcie_patch - Patch for PCIE module + */ +static void atl1_pcie_patch(struct atl1_adapter *adapter) +{ + u32 value; + + /* much vendor magic here */ + value = 0x6500; + iowrite32(value, adapter->hw.hw_addr + 0x12FC); + /* pcie flow control mode change */ + value = ioread32(adapter->hw.hw_addr + 0x1008); + value |= 0x8000; + iowrite32(value, adapter->hw.hw_addr + 0x1008); +} + +/* + * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 + * on PCI Command register is disable. + * The function enable this bit. + * Brackett, 2006/03/15 + */ +static void atl1_via_workaround(struct atl1_adapter *adapter) +{ + unsigned long value; + + value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); + if (value & PCI_COMMAND_INTX_DISABLE) + value &= ~PCI_COMMAND_INTX_DISABLE; + iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); +} + +/* + * atl1_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static void atl1_irq_enable(struct atl1_adapter *adapter) +{ + iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); + ioread32(adapter->hw.hw_addr + REG_IMR); +} + +/* + * atl1_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static void atl1_irq_disable(struct atl1_adapter *adapter) +{ + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + ioread32(adapter->hw.hw_addr + REG_IMR); + synchronize_irq(adapter->pdev->irq); +} + +static void atl1_clear_phy_int(struct atl1_adapter *adapter) +{ + u16 phy_data; + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + atl1_read_phy_reg(&adapter->hw, 19, &phy_data); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static void atl1_inc_smb(struct atl1_adapter *adapter) +{ + struct stats_msg_block *smb = adapter->smb.smb; + + /* Fill out the OS statistics structure */ + adapter->soft_stats.rx_packets += smb->rx_ok; + adapter->soft_stats.tx_packets += smb->tx_ok; + adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; + adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; + adapter->soft_stats.multicast += smb->rx_mcast; + adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + + smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); + + /* Rx Errors */ + adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + + smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + + smb->rx_rrd_ov + smb->rx_align_err); + adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; + adapter->soft_stats.rx_length_errors += smb->rx_len_err; + adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; + adapter->soft_stats.rx_frame_errors += smb->rx_align_err; + adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + + smb->rx_rxf_ov); + + adapter->soft_stats.rx_pause += smb->rx_pause; + adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; + adapter->soft_stats.rx_trunc += smb->rx_sz_ov; + + /* Tx Errors */ + adapter->soft_stats.tx_errors += (smb->tx_late_col + + smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); + adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; + adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; + adapter->soft_stats.tx_window_errors += smb->tx_late_col; + + adapter->soft_stats.excecol += smb->tx_abort_col; + adapter->soft_stats.deffer += smb->tx_defer; + adapter->soft_stats.scc += smb->tx_1_col; + adapter->soft_stats.mcc += smb->tx_2_col; + adapter->soft_stats.latecol += smb->tx_late_col; + adapter->soft_stats.tx_underun += smb->tx_underrun; + adapter->soft_stats.tx_trunc += smb->tx_trunc; + adapter->soft_stats.tx_pause += smb->tx_pause; + + adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; + adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; + adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; + adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; + adapter->net_stats.multicast = adapter->soft_stats.multicast; + adapter->net_stats.collisions = adapter->soft_stats.collisions; + adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; + adapter->net_stats.rx_over_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.rx_length_errors = + adapter->soft_stats.rx_length_errors; + adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; + adapter->net_stats.rx_frame_errors = + adapter->soft_stats.rx_frame_errors; + adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; + adapter->net_stats.rx_missed_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; + adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; + adapter->net_stats.tx_aborted_errors = + adapter->soft_stats.tx_aborted_errors; + adapter->net_stats.tx_window_errors = + adapter->soft_stats.tx_window_errors; + adapter->net_stats.tx_carrier_errors = + adapter->soft_stats.tx_carrier_errors; +} + +/* + * atl1_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + */ +static struct net_device_stats *atl1_get_stats(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + return &adapter->net_stats; +} + +static void atl1_update_mailbox(struct atl1_adapter *adapter) +{ + unsigned long flags; + u32 tpd_next_to_use; + u32 rfd_next_to_use; + u32 rrd_next_to_clean; + u32 value; + + spin_lock_irqsave(&adapter->mb_lock, flags); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); + + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + + spin_unlock_irqrestore(&adapter->mb_lock, flags); +} + +static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, u16 offset) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + + while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { + rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; + if (++rfd_ring->next_to_clean == rfd_ring->count) { + rfd_ring->next_to_clean = 0; + } + } +} + +static void atl1_update_rfd_index(struct atl1_adapter *adapter, + struct rx_return_desc *rrd) +{ + u16 num_buf; + + num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / + adapter->rx_buffer_len; + if (rrd->num_buf == num_buf) + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, num_buf); +} + +static void atl1_rx_checksum(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, struct sk_buff *skb) +{ + struct pci_dev *pdev = adapter->pdev; + + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | + ERR_FLAG_CODE | ERR_FLAG_OV)) { + adapter->hw_csum_err++; + dev_printk(KERN_DEBUG, &pdev->dev, + "rx checksum error\n"); + return; + } + } + + /* not IPv4 */ + if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) + /* checksum is invalid, but it's not an IPv4 pkt, so ok */ + return; + + /* IPv4 packet */ + if (likely(!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_good++; + return; + } + + /* IPv4, but hardware thinks its checksum is wrong */ + dev_printk(KERN_DEBUG, &pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); + adapter->hw_csum_err++; + return; +} + +/* + * atl1_alloc_rx_buffers - Replace used receive buffers + * @adapter: address of board private structure + */ +static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct pci_dev *pdev = adapter->pdev; + struct page *page; + unsigned long offset; + struct atl1_buffer *buffer_info, *next_info; + struct sk_buff *skb; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct rx_free_desc *rfd_desc; + + next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + + while (!buffer_info->alloced && !next_info->alloced) { + if (buffer_info->skb) { + buffer_info->alloced = 1; + goto next; + } + + rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); + + skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); + if (unlikely(!skb)) { /* Better luck next round */ + adapter->net_stats.rx_dropped++; + break; + } + + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + buffer_info->alloced = 1; + buffer_info->skb = skb; + buffer_info->length = (u16) adapter->rx_buffer_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(pdev, page, offset, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); + rfd_desc->coalese = 0; + +next: + rfd_next_to_use = next_next; + if (unlikely(++next_next == rfd_ring->count)) + next_next = 0; + + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; + } + + if (num_alloc) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); + } + return num_alloc; +} + +static void atl1_intr_rx(struct atl1_adapter *adapter) +{ + int i, count; + u16 length; + u16 rrd_next_to_clean; + u32 value; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct rx_return_desc *rrd; + struct sk_buff *skb; + + count = 0; + + rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); + + while (1) { + rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); + i = 1; + if (likely(rrd->xsz.valid)) { /* packet valid */ +chk_rrd: + /* check rrd status */ + if (likely(rrd->num_buf == 1)) + goto rrd_ok; + + /* rrd seems to be bad */ + if (unlikely(i-- > 0)) { + /* rrd may not be DMAed completely */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "incomplete RRD DMA transfer\n"); + udelay(1); + goto chk_rrd; + } + /* bad rrd */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "bad RRD\n"); + /* see if update RFD index */ + if (rrd->num_buf > 1) + atl1_update_rfd_index(adapter, rrd); + + /* update rrd */ + rrd->xsz.valid = 0; + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + continue; + } else { /* current rrd still not be updated */ + + break; + } +rrd_ok: + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, 0); + + buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; + if (++rfd_ring->next_to_clean == rfd_ring->count) + rfd_ring->next_to_clean = 0; + + /* update rrd next to clean */ + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM + | ERR_FLAG_LEN))) { + /* packet error, don't need upstream */ + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + continue; + } + } + + /* Good Receive */ + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + skb = buffer_info->skb; + length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); + + skb_put(skb, length - ETH_FCS_LEN); + + /* Receive Checksum Offload */ + atl1_rx_checksum(adapter, rrd, skb); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { + u16 vlan_tag = (rrd->vlan_tag >> 4) | + ((rrd->vlan_tag & 7) << 13) | + ((rrd->vlan_tag & 8) << 9); + vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); + } else + netif_rx(skb); + + /* let protocol layer free skb */ + buffer_info->skb = NULL; + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + + adapter->netdev->last_rx = jiffies; + } + + atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); + + atl1_alloc_rx_buffers(adapter); + + /* update mailbox ? */ + if (count) { + u32 tpd_next_to_use; + u32 rfd_next_to_use; + + spin_lock(&adapter->mb_lock); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = + atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = + atomic_read(&adapter->rrd_ring.next_to_clean); + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + spin_unlock(&adapter->mb_lock); + } +} + +static void atl1_intr_tx(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 sw_tpd_next_to_clean; + u16 cmb_tpd_next_to_clean; + + sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); + cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); + + while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { + struct tx_packet_desc *tpd; + + tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); + buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; + if (buffer_info->dma) { + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } + tpd->buffer_addr = 0; + tpd->desc.data = 0; + + if (++sw_tpd_next_to_clean == tpd_ring->count) + sw_tpd_next_to_clean = 0; + } + atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); + + if (netif_queue_stopped(adapter->netdev) + && netif_carrier_ok(adapter->netdev)) + netif_wake_queue(adapter->netdev); +} + +static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) +{ + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 next_to_use = atomic_read(&tpd_ring->next_to_use); + return ((next_to_clean > next_to_use) ? + next_to_clean - next_to_use - 1 : + tpd_ring->count + next_to_clean - next_to_use - 1); +} + +static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tso_param *tso) +{ + /* We enter this function holding a spinlock. */ + u8 ipofst; + int err; + + if (skb_shinfo(skb)->gso_size) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return err; + } + + if (skb->protocol == ntohs(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, IPPROTO_TCP, 0); + ipofst = skb_network_offset(skb); + if (ipofst != ETH_HLEN) /* 802.3 frame */ + tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; + + tso->tsopl |= (iph->ihl & + CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; + tso->tsopl |= (tcp_hdrlen(skb) & + TSO_PARAM_TCPHDRLEN_MASK) << + TSO_PARAM_TCPHDRLEN_SHIFT; + tso->tsopl |= (skb_shinfo(skb)->gso_size & + TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; + return true; + } + } + return false; +} + +static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, + struct csum_param *csum) +{ + u8 css, cso; + + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + cso = skb_transport_offset(skb); + css = cso + skb->csum_offset; + if (unlikely(cso & 0x1)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "payload offset not an even number\n"); + return -1; + } + csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << + CSUM_PARAM_PLOADOFFSET_SHIFT; + csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << + CSUM_PARAM_XSUMOFFSET_SHIFT; + csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; + return true; + } + + return true; +} + +static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, + bool tcp_seg) +{ + /* We enter this function holding a spinlock. */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct page *page; + int first_buf_len = skb->len; + unsigned long offset; + unsigned int nr_frags; + unsigned int f; + u16 tpd_next_to_use; + u16 proto_hdr_len; + u16 len12; + + first_buf_len -= skb->data_len; + nr_frags = skb_shinfo(skb)->nr_frags; + tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + buffer_info->skb = NULL; /* put skb in last TPD */ + + if (tcp_seg) { + /* TSO/GSO */ + proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + buffer_info->length = proto_hdr_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, proto_hdr_len, + PCI_DMA_TODEVICE); + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + + if (first_buf_len > proto_hdr_len) { + int i, m; + + len12 = first_buf_len - proto_hdr_len; + m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < m; i++) { + buffer_info = + &tpd_ring->buffer_info[tpd_next_to_use]; + buffer_info->skb = NULL; + buffer_info->length = + (ATL1_MAX_TX_BUF_LEN >= + len12) ? ATL1_MAX_TX_BUF_LEN : len12; + len12 -= buffer_info->length; + page = virt_to_page(skb->data + + (proto_hdr_len + + i * ATL1_MAX_TX_BUF_LEN)); + offset = (unsigned long)(skb->data + + (proto_hdr_len + + i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, + page, offset, buffer_info->length, + PCI_DMA_TODEVICE); + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + } + } else { + /* not TSO/GSO */ + buffer_info->length = first_buf_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, first_buf_len, PCI_DMA_TODEVICE); + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + u16 lenf, i, m; + + frag = &skb_shinfo(skb)->frags[f]; + lenf = frag->size; + + m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < m; i++) { + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + buffer_info->skb = NULL; + buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? + ATL1_MAX_TX_BUF_LEN : lenf; + lenf -= buffer_info->length; + buffer_info->dma = pci_map_page(adapter->pdev, + frag->page, + frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), + buffer_info->length, PCI_DMA_TODEVICE); + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + } + + /* last tpd's buffer-info */ + buffer_info->skb = skb; +} + +static void atl1_tx_queue(struct atl1_adapter *adapter, int count, + union tpd_descr *descr) +{ + /* We enter this function holding a spinlock. */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + int j; + u32 val; + struct atl1_buffer *buffer_info; + struct tx_packet_desc *tpd; + u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); + + for (j = 0; j < count; j++) { + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); + tpd->desc.csum.csumpu = descr->csum.csumpu; + tpd->desc.csum.csumpl = descr->csum.csumpl; + tpd->desc.tso.tsopu = descr->tso.tsopu; + tpd->desc.tso.tsopl = descr->tso.tsopl; + tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + tpd->desc.data = descr->data; + tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & + CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; + + val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & + TSO_PARAM_SEGMENT_MASK; + if (val && !j) + tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; + + if (j == (count - 1)) + tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); +} + +static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int len = skb->len; + int tso; + int count = 1; + int ret_val; + u32 val; + union tpd_descr param; + u16 frag_size; + u16 vlan_tag; + unsigned long flags; + unsigned int nr_frags = 0; + unsigned int mss = 0; + unsigned int f; + unsigned int proto_hdr_len; + + len -= skb->data_len; + + if (unlikely(skb->len == 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + param.data = 0; + param.tso.tsopu = 0; + param.tso.tsopl = 0; + param.csum.csumpu = 0; + param.csum.csumpl = 0; + + /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ + nr_frags = skb_shinfo(skb)->nr_frags; + for (f = 0; f < nr_frags; f++) { + frag_size = skb_shinfo(skb)->frags[f].size; + if (frag_size) + count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + + /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ + mss = skb_shinfo(skb)->gso_size; + if (mss) { + if (skb->protocol == htons(ETH_P_IP)) { + proto_hdr_len = (skb_transport_offset(skb) + + tcp_hdrlen(skb)); + if (unlikely(proto_hdr_len > len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* need additional TPD ? */ + if (proto_hdr_len != len) + count += (len - proto_hdr_len + + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + } + + if (!spin_trylock_irqsave(&adapter->lock, flags)) { + /* Can't get lock - tell upper layer to requeue */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); + return NETDEV_TX_LOCKED; + } + + if (atl1_tpd_avail(&adapter->tpd_ring) < count) { + /* not enough descriptors */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->lock, flags); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); + return NETDEV_TX_BUSY; + } + + param.data = 0; + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + vlan_tag = vlan_tx_tag_get(skb); + vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | + ((vlan_tag >> 9) & 0x8); + param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; + param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << + CSUM_PARAM_VALAN_SHIFT; + } + + tso = atl1_tso(adapter, skb, ¶m.tso); + if (tso < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (!tso) { + ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); + if (ret_val < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + + val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & + CSUM_PARAM_SEGMENT_MASK; + atl1_tx_map(adapter, skb, 1 == val); + atl1_tx_queue(adapter, count, ¶m); + netdev->trans_start = jiffies; + spin_unlock_irqrestore(&adapter->lock, flags); + atl1_update_mailbox(adapter); + return NETDEV_TX_OK; +} + +/* + * atl1_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1_intr(int irq, void *data) +{ + struct atl1_adapter *adapter = netdev_priv(data); + u32 status; + u8 update_rx; + int max_ints = 10; + + status = adapter->cmb.cmb->int_stats; + if (!status) + return IRQ_NONE; + + update_rx = 0; + + do { + /* clear CMB interrupt status at once */ + adapter->cmb.cmb->int_stats = 0; + + if (status & ISR_GPHY) /* clear phy status */ + atl1_clear_phy_int(adapter); + + /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ + iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); + + /* check if SMB intr */ + if (status & ISR_SMB) + atl1_inc_smb(adapter); + + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie phy link down %x\n", status); + if (netif_running(adapter->netdev)) { /* reset MAC */ + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; + } + } + + /* check if DMA read/write error ? */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; + } + + /* link event */ + if (status & ISR_GPHY) { + adapter->soft_stats.tx_carrier_errors++; + atl1_check_for_link(adapter); + } + + /* transmit event */ + if (status & ISR_CMB_TX) + atl1_intr_tx(adapter); + + /* rx exception */ + if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV | ISR_CMB_RX))) { + if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", status); + atl1_intr_rx(adapter); + } + + if (--max_ints < 0) + break; + + } while ((status = adapter->cmb.cmb->int_stats)); + + /* re-enable Interrupt */ + iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); + return IRQ_HANDLED; +} + +/* + * atl1_watchdog - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_watchdog(unsigned long data) +{ + struct atl1_adapter *adapter = (struct atl1_adapter *)data; + + /* Reset the timer */ + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); +} + +/* + * atl1_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_phy_config(unsigned long data) +{ + struct atl1_adapter *adapter = (struct atl1_adapter *)data; + struct atl1_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + adapter->phy_timer_pending = false; + atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg); + atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +/* + * atl1_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atl1_tx_timeout(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->tx_timeout_task); +} + +/* + * Orphaned vendor comment left intact here: + * + * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT + * will assert. We do soft reset <0x1400=1> according + * with the SPEC. BUT, it seemes that PCIE or DMA + * state-machine will not be reset. DMAR_TO_INT will + * assert again and again. + * + */ +static void atl1_tx_timeout_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, tx_timeout_task); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1_down(adapter); + atl1_up(adapter); + netif_device_attach(netdev); +} + +/* + * atl1_link_chg_task - deal with link change event Out of interrupt context + */ +static void atl1_link_chg_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, link_chg_task); + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + atl1_check_link(adapter); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static void atl1_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&adapter->lock, flags); + /* atl1_irq_disable(adapter); */ + adapter->vlgrp = grp; + + if (grp) { + /* enable VLAN tag insert/strip */ + ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); + ctrl |= MAC_CTRL_RMV_VLAN; + iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); + } else { + /* disable VLAN tag insert/strip */ + ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); + ctrl &= ~MAC_CTRL_RMV_VLAN; + iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); + } + + /* atl1_irq_enable(adapter); */ + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static void atl1_restore_vlan(struct atl1_adapter *adapter) +{ + atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp); +} + +int atl1_reset(struct atl1_adapter *adapter) +{ + int ret; + + ret = atl1_reset_hw(&adapter->hw); + if (ret != ATL1_SUCCESS) + return ret; + return atl1_init_hw(&adapter->hw); +} + +s32 atl1_up(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + int irq_flags = IRQF_SAMPLE_RANDOM; + + /* hardware has been reset, we need to reload some things */ + atl1_set_multi(netdev); + atl1_init_ring_ptrs(adapter); + atl1_restore_vlan(adapter); + err = atl1_alloc_rx_buffers(adapter); + if (unlikely(!err)) /* no RX BUFFER allocated */ + return -ENOMEM; + + if (unlikely(atl1_configure(adapter))) { + err = -EIO; + goto err_up; + } + + err = pci_enable_msi(adapter->pdev); + if (err) { + dev_info(&adapter->pdev->dev, + "Unable to enable MSI: %d\n", err); + irq_flags |= IRQF_SHARED; + } + + err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, + netdev->name, netdev); + if (unlikely(err)) + goto err_up; + + mod_timer(&adapter->watchdog_timer, jiffies); + atl1_irq_enable(adapter); + atl1_check_link(adapter); + return 0; + +err_up: + pci_disable_msi(adapter->pdev); + /* free rx_buffers */ + atl1_clean_rx_ring(adapter); + return err; +} + +void atl1_down(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_config_timer); + adapter->phy_timer_pending = false; + + atl1_irq_disable(adapter); + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + atl1_reset_hw(&adapter->hw); + adapter->cmb.cmb->int_stats = 0; + + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); +} + +/* + * atl1_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1_open(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int err; + + /* allocate transmit descriptors */ + err = atl1_setup_ring_resources(adapter); + if (err) + return err; + + err = atl1_up(adapter); + if (err) + goto err_up; + + return 0; + +err_up: + atl1_reset(adapter); + return err; +} + +/* + * atl1_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1_close(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + atl1_down(adapter); + atl1_free_ring_resources(adapter); + return 0; +} + +#ifdef CONFIG_PM +static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u32 ctrl = 0; + u32 wufc = adapter->wol; + + netif_device_detach(netdev); + if (netif_running(netdev)) + atl1_down(adapter); + + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + if (ctrl & BMSR_LSTATUS) + wufc &= ~ATL1_WUFC_LNKC; + + /* reduce speed to 10/100M */ + if (wufc) { + atl1_phy_enter_power_saving(hw); + /* if resume, let driver to re- setup link */ + hw->phy_configured = false; + atl1_set_mac_addr(hw); + atl1_set_multi(netdev); + + ctrl = 0; + /* turn on magic packet wol */ + if (wufc & ATL1_WUFC_MAG) + ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + + /* turn on Link change WOL */ + if (wufc & ATL1_WUFC_LNKC) + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + + /* turn on all-multi mode if wake on multicast is enabled */ + ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); + ctrl &= ~MAC_CTRL_DBG; + ctrl &= ~MAC_CTRL_PROMIS_EN; + if (wufc & ATL1_WUFC_MC) + ctrl |= MAC_CTRL_MC_ALL_EN; + else + ctrl &= ~MAC_CTRL_MC_ALL_EN; + + /* turn on broadcast mode if wake on-BC is enabled */ + if (wufc & ATL1_WUFC_BC) + ctrl |= MAC_CTRL_BC_EN; + else + ctrl &= ~MAC_CTRL_BC_EN; + + /* enable RX */ + ctrl |= MAC_CTRL_RX_EN; + iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + iowrite32(0, hw->hw_addr + REG_WOL_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + } + + pci_save_state(pdev); + pci_disable_device(pdev); + + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int atl1_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + u32 ret_val; + + pci_set_power_state(pdev, 0); + pci_restore_state(pdev); + + ret_val = pci_enable_device(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); + atl1_reset(adapter); + + if (netif_running(netdev)) + atl1_up(adapter); + netif_device_attach(netdev); + + atl1_via_workaround(adapter); + + return 0; +} +#else +#define atl1_suspend NULL +#define atl1_resume NULL +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void atl1_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + atl1_intr(netdev->irq, netdev); + enable_irq(netdev->irq); +} +#endif + +/* + * atl1_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int __devinit atl1_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1_adapter *adapter; + static int cards_found = 0; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + /* + * The atl1 chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; + } + /* Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl1_driver_name + */ + err = pci_request_regions(pdev, atl1_driver_name); + if (err) + goto err_request_regions; + + /* Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings + */ + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + + adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_pci_iomap; + } + /* get device revision number */ + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); + + /* set default ring resource counts */ + adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; + adapter->tpd_ring.count = ATL1_DEFAULT_TPD; + + adapter->mii.dev = netdev; + adapter->mii.mdio_read = mdio_read; + adapter->mii.mdio_write = mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = 0x1f; + + netdev->open = &atl1_open; + netdev->stop = &atl1_close; + netdev->hard_start_xmit = &atl1_xmit_frame; + netdev->get_stats = &atl1_get_stats; + netdev->set_multicast_list = &atl1_set_multi; + netdev->set_mac_address = &atl1_set_mac; + netdev->change_mtu = &atl1_change_mtu; + netdev->do_ioctl = &atl1_ioctl; + netdev->tx_timeout = &atl1_tx_timeout; + netdev->watchdog_timeo = 5 * HZ; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = atl1_poll_controller; +#endif + netdev->vlan_rx_register = atl1_vlan_rx_register; + + netdev->ethtool_ops = &atl1_ethtool_ops; + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = atl1_sw_init(adapter); + if (err) + goto err_common; + + netdev->features = NETIF_F_HW_CSUM; + netdev->features |= NETIF_F_SG; + netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); + + /* + * FIXME - Until tso performance gets fixed, disable the feature. + * Enable it with ethtool -K if desired. + */ + /* netdev->features |= NETIF_F_TSO; */ + + netdev->features |= NETIF_F_LLTX; + + /* + * patch for some L1 of old version, + * the final version of L1 may not need these + * patches + */ + /* atl1_pcie_patch(adapter); */ + + /* really reset GPHY core */ + iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); + + /* + * reset the controller to + * put the device in a known good starting state + */ + if (atl1_reset_hw(&adapter->hw)) { + err = -EIO; + goto err_common; + } + + /* copy the MAC address out of the EEPROM */ + atl1_read_mac_addr(&adapter->hw); + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->dev_addr)) { + err = -EIO; + goto err_common; + } + + atl1_check_options(adapter); + + /* pre-init the MAC, and setup link */ + err = atl1_init_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_common; + } + + atl1_pcie_patch(adapter); + /* assume we have no link for now */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &atl1_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + + init_timer(&adapter->phy_config_timer); + adapter->phy_config_timer.function = &atl1_phy_config; + adapter->phy_config_timer.data = (unsigned long)adapter; + adapter->phy_timer_pending = false; + + INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); + + INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task); + + INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); + + err = register_netdev(netdev); + if (err) + goto err_common; + + cards_found++; + atl1_via_workaround(adapter); + return 0; + +err_common: + pci_iounmap(pdev, adapter->hw.hw_addr); +err_pci_iomap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_dma: +err_request_regions: + pci_disable_device(pdev); + return err; +} + +/* + * atl1_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void __devexit atl1_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter; + /* Device not available. Return. */ + if (!netdev) + return; + + adapter = netdev_priv(netdev); + + /* Some atl1 boards lack persistent storage for their MAC, and get it + * from the BIOS during POST. If we've been messing with the MAC + * address, we need to save the permanent one. + */ + if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { + memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, + ETH_ALEN); + atl1_set_mac_addr(&adapter->hw); + } + + iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); + unregister_netdev(netdev); + pci_iounmap(pdev, adapter->hw.hw_addr); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); +} + +static struct pci_driver atl1_driver = { + .name = atl1_driver_name, + .id_table = atl1_pci_tbl, + .probe = atl1_probe, + .remove = __devexit_p(atl1_remove), + .suspend = atl1_suspend, + .resume = atl1_resume +}; + +/* + * atl1_exit_module - Driver Exit Cleanup Routine + * + * atl1_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl1_exit_module(void) +{ + pci_unregister_driver(&atl1_driver); +} + +/* + * atl1_init_module - Driver Registration Routine + * + * atl1_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl1_init_module(void) +{ + return pci_register_driver(&atl1_driver); +} + +module_init(atl1_init_module); +module_exit(atl1_exit_module); diff --git a/drivers/net/atlx/atl1_param.c b/drivers/net/atlx/atl1_param.c new file mode 100644 index 0000000..4246bb9 --- /dev/null +++ b/drivers/net/atlx/atl1_param.c @@ -0,0 +1,203 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include "atl1.h" + +/* + * This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ +#define ATL1_MAX_NIC 4 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } + +/* + * Interrupt Moderate Timer in units of 2 us + * + * Valid Range: 10-65535 + * + * Default Value: 100 (200us) + */ +static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; +static int num_int_mod_timer = 0; +module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0); +MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); + +/* + * flash_vendor + * + * Valid Range: 0-2 + * + * 0 - Atmel + * 1 - SST + * 2 - ST + * + * Default Value: 0 + */ +static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; +static int num_flash_vendor = 0; +module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0); +MODULE_PARM_DESC(flash_vendor, "SPI flash vendor"); + +#define DEFAULT_INT_MOD_CNT 100 /* 200us */ +#define MAX_INT_MOD_CNT 65000 +#define MIN_INT_MOD_CNT 50 + +#define FLASH_VENDOR_DEFAULT 0 +#define FLASH_VENDOR_MIN 0 +#define FLASH_VENDOR_MAX 2 + +struct atl1_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl1_opt_list { + int i; + char *str; + } *p; + } l; + } arg; +}; + +static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + dev_info(&pdev->dev, "%s enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + dev_info(&pdev->dev, "%s disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + dev_info(&pdev->dev, "%s set to %i\n", opt->name, + *value); + return 0; + } + break; + case list_option:{ + int i; + struct atl1_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + dev_info(&pdev->dev, "%s\n", + ent->str); + return 0; + } + } + } + break; + + default: + break; + } + + dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/* + * atl1_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +void __devinit atl1_check_options(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int bd = adapter->bd_number; + if (bd >= ATL1_MAX_NIC) { + dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); + dev_notice(&pdev->dev, "using defaults for all values\n"); + } + { /* Interrupt Moderate Timer */ + struct atl1_option opt = { + .type = range_option, + .name = "Interrupt Moderator Timer", + .err = "using default of " + __MODULE_STRING(DEFAULT_INT_MOD_CNT), + .def = DEFAULT_INT_MOD_CNT, + .arg = {.r = + {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}} + }; + int val; + if (num_int_mod_timer > bd) { + val = int_mod_timer[bd]; + atl1_validate_option(&val, &opt, pdev); + adapter->imt = (u16) val; + } else + adapter->imt = (u16) (opt.def); + } + + { /* Flash Vendor */ + struct atl1_option opt = { + .type = range_option, + .name = "SPI Flash Vendor", + .err = "using default of " + __MODULE_STRING(FLASH_VENDOR_DEFAULT), + .def = DEFAULT_INT_MOD_CNT, + .arg = {.r = + {.min = FLASH_VENDOR_MIN,.max = + FLASH_VENDOR_MAX}} + }; + int val; + if (num_flash_vendor > bd) { + val = flash_vendor[bd]; + atl1_validate_option(&val, &opt, pdev); + adapter->hw.flash_vendor = (u8) val; + } else + adapter->hw.flash_vendor = (u8) (opt.def); + } +} -- cgit v1.1 From 305282ba19f81e571bd6d2dcc10ebb02e59a06ef Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:04 -0600 Subject: atl1: move common functions to atlx files The future atl2 driver and the existing atl1 driver can share certain functions and definitions. Move these shareable functions and definitions out of atl1-specific files and into atlx.c and atlx.h. Some transitory hackery will be present until atl2 is merged. Reduce the number of source files by moving ethtool, hw, and param functions from separate files into atl1_main.c, then rename it to just atl1.c. Move all atl1-specific definitions from atl1_hw.h to atl1.h. Finally, clean up to make checkpatch.pl happy. Signed-off-by: Chris Snook Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/Makefile | 1 - drivers/net/atlx/atl1.c | 3417 +++++++++++++++++++++++++++++++++++++++ drivers/net/atlx/atl1.h | 603 ++++++- drivers/net/atlx/atl1_ethtool.c | 505 ------ drivers/net/atlx/atl1_hw.c | 720 --------- drivers/net/atlx/atl1_hw.h | 946 ----------- drivers/net/atlx/atl1_main.c | 2453 ---------------------------- drivers/net/atlx/atl1_param.c | 203 --- drivers/net/atlx/atlx.c | 433 +++++ drivers/net/atlx/atlx.h | 506 ++++++ 10 files changed, 4914 insertions(+), 4873 deletions(-) create mode 100644 drivers/net/atlx/atl1.c delete mode 100644 drivers/net/atlx/atl1_ethtool.c delete mode 100644 drivers/net/atlx/atl1_hw.c delete mode 100644 drivers/net/atlx/atl1_hw.h delete mode 100644 drivers/net/atlx/atl1_main.c delete mode 100644 drivers/net/atlx/atl1_param.c create mode 100644 drivers/net/atlx/atlx.c create mode 100644 drivers/net/atlx/atlx.h (limited to 'drivers') diff --git a/drivers/net/atlx/Makefile b/drivers/net/atlx/Makefile index a6b707e..ca45553 100644 --- a/drivers/net/atlx/Makefile +++ b/drivers/net/atlx/Makefile @@ -1,2 +1 @@ obj-$(CONFIG_ATL1) += atl1.o -atl1-y += atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c new file mode 100644 index 0000000..a84c97c --- /dev/null +++ b/drivers/net/atlx/atl1.c @@ -0,0 +1,3417 @@ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 - 2007 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called COPYING. + * + * Contact Information: + * Xiong Huang + * Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei, + * Xinzhu 302, TAIWAN, REPUBLIC OF CHINA + * + * Chris Snook + * Jay Cliburn + * + * This version is adapted from the Attansic reference driver for + * inclusion in the Linux kernel. It is currently under heavy development. + * A very incomplete list of things that need to be dealt with: + * + * TODO: + * Fix TSO; tx performance is horrible with TSO enabled. + * Wake on LAN. + * Add more ethtool functions. + * Fix abstruse irq enable/disable condition described here: + * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 + * + * NEEDS TESTING: + * VLAN + * multicast + * promiscuous mode + * interrupt coalescing + * SMP torture testing + */ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "atl1.h" + +/* Temporary hack for merging atl1 and atl2 */ +#include "atlx.c" + +/* + * atl1_pci_tbl - PCI Device ID Table + */ +static const struct pci_device_id atl1_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, + /* required last entry */ + {0,} +}; +MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); + +/* + * atl1_sw_init - Initialize general software structures (struct atl1_adapter) + * @adapter: board private structure to initialize + * + * atl1_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1_sw_init(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + + adapter->wol = 0; + adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; + adapter->ict = 50000; /* 100ms */ + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; + + hw->phy_configured = false; + hw->preamble_len = 7; + hw->ipgt = 0x60; + hw->min_ifg = 0x50; + hw->ipgr1 = 0x40; + hw->ipgr2 = 0x60; + hw->max_retry = 0xf; + hw->lcol = 0x37; + hw->jam_ipg = 7; + hw->rfd_burst = 8; + hw->rrd_burst = 8; + hw->rfd_fetch_gap = 1; + hw->rx_jumbo_th = adapter->rx_buffer_len / 8; + hw->rx_jumbo_lkah = 1; + hw->rrd_ret_timer = 16; + hw->tpd_burst = 4; + hw->tpd_fetch_th = 16; + hw->txf_burst = 0x100; + hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; + hw->tpd_fetch_gap = 1; + hw->rcb_value = atl1_rcb_64; + hw->dma_ord = atl1_dma_ord_enh; + hw->dmar_block = atl1_dma_req_256; + hw->dmaw_block = atl1_dma_req_256; + hw->cmb_rrd = 4; + hw->cmb_tpd = 4; + hw->cmb_rx_timer = 1; /* about 2us */ + hw->cmb_tx_timer = 1; /* about 2us */ + hw->smb_timer = 100000; /* about 200ms */ + + spin_lock_init(&adapter->lock); + spin_lock_init(&adapter->mb_lock); + + return 0; +} + +static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); + + return result; +} + +static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, + int val) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + atl1_write_phy_reg(&adapter->hw, reg_num, val); +} + +/* + * atl1_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + int retval; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->lock, flags); + retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); + spin_unlock_irqrestore(&adapter->lock, flags); + + return retval; +} + +/* + * atl1_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + struct pci_dev *pdev = adapter->pdev; + int size; + u8 offset = 0; + + size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); + goto err_nomem; + } + rfd_ring->buffer_info = + (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); + + /* + * real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional 40 bytes tacked onto the end. + */ + ring_header->size = size = + sizeof(struct tx_packet_desc) * tpd_ring->count + + sizeof(struct rx_free_desc) * rfd_ring->count + + sizeof(struct rx_return_desc) * rrd_ring->count + + sizeof(struct coals_msg_block) + + sizeof(struct stats_msg_block) + + 40; + + ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, + &ring_header->dma); + if (unlikely(!ring_header->desc)) { + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); + goto err_nomem; + } + + memset(ring_header->desc, 0, ring_header->size); + + /* init TPD ring */ + tpd_ring->dma = ring_header->dma; + offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; + tpd_ring->dma += offset; + tpd_ring->desc = (u8 *) ring_header->desc + offset; + tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; + + /* init RFD ring */ + rfd_ring->dma = tpd_ring->dma + tpd_ring->size; + offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; + rfd_ring->dma += offset; + rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); + rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; + + + /* init RRD ring */ + rrd_ring->dma = rfd_ring->dma + rfd_ring->size; + offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; + rrd_ring->dma += offset; + rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); + rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; + + + /* init CMB */ + adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; + offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; + adapter->cmb.dma += offset; + adapter->cmb.cmb = (struct coals_msg_block *) + ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); + + /* init SMB */ + adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); + offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; + adapter->smb.dma += offset; + adapter->smb.smb = (struct stats_msg_block *) + ((u8 *) adapter->cmb.cmb + + (sizeof(struct coals_msg_block) + offset)); + + return 0; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; +} + +static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/* + * atl1_clean_rx_ring - Free RFD Buffers + * @adapter: board private structure + */ +static void atl1_clean_rx_ring(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rfd_ring->count; i++) { + buffer_info = &rfd_ring->buffer_info[i]; + if (buffer_info->dma) { + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; + } + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * rfd_ring->count; + memset(rfd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rfd_ring->desc, 0, rfd_ring->size); + + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); + + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} + +/* + * atl1_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + */ +static void atl1_clean_tx_ring(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->dma) { + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } + } + + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; + if (buffer_info->skb) { + dev_kfree_skb_any(buffer_info->skb); + buffer_info->skb = NULL; + } + } + + size = sizeof(struct atl1_buffer) * tpd_ring->count; + memset(tpd_ring->buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tpd_ring->desc, 0, tpd_ring->size); + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); +} + +/* + * atl1_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +void atl1_free_ring_resources(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); + + kfree(tpd_ring->buffer_info); + pci_free_consistent(pdev, ring_header->size, ring_header->desc, + ring_header->dma); + + tpd_ring->buffer_info = NULL; + tpd_ring->desc = NULL; + tpd_ring->dma = 0; + + rfd_ring->buffer_info = NULL; + rfd_ring->desc = NULL; + rfd_ring->dma = 0; + + rrd_ring->desc = NULL; + rrd_ring->dma = 0; +} + +static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) +{ + u32 value; + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + /* duplex */ + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + /* speed */ + value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << + MAC_CTRL_SPEED_SHIFT); + /* flow control */ + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + /* PAD & CRC */ + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + /* preamble length */ + value |= (((u32) adapter->hw.preamble_len + & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + /* vlan */ + if (adapter->vlgrp) + value |= MAC_CTRL_RMV_VLAN; + /* rx checksum + if (adapter->rx_csum) + value |= MAC_CTRL_RX_CHKSUM_EN; + */ + /* filter mode */ + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + /* value |= MAC_CTRL_LOOPBACK; */ + iowrite32(value, hw->hw_addr + REG_MAC_CTRL); +} + +static u32 atl1_check_link(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 ret_val; + u16 speed, duplex, phy_data; + int reconfig = 0; + + /* MII_BMSR must read twice */ + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + if (!(phy_data & BMSR_LSTATUS)) { + /* link down */ + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + dev_info(&adapter->pdev->dev, "link is down\n"); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + return 0; + } + + /* Link Up */ + ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) + return ret_val; + + switch (hw->media_type) { + case MEDIA_TYPE_1000M_FULL: + if (speed != SPEED_1000 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_FULL: + if (speed != SPEED_100 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_HALF: + if (speed != SPEED_100 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_FULL: + if (speed != SPEED_10 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_HALF: + if (speed != SPEED_10 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + } + + /* link result is our setting */ + if (!reconfig) { + if (adapter->link_speed != speed + || adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1_setup_mac_ctrl(adapter); + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); + } + if (!netif_carrier_ok(netdev)) { + /* Link down -> Up */ + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + return 0; + } + + /* change original link status */ + if (netif_carrier_ok(netdev)) { + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + + if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && + hw->media_type != MEDIA_TYPE_1000M_FULL) { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + return 0; + } + + /* auto-neg, insert timer to re-config phy */ + if (!adapter->phy_timer_pending) { + adapter->phy_timer_pending = true; + mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); + } + + return 0; +} + +/* + * atl1_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + + adapter->hw.max_frame_size = max_frame; + adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; + adapter->rx_buffer_len = (max_frame + 7) & ~7; + adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; + + netdev->mtu = new_mtu; + if ((old_mtu != new_mtu) && netif_running(netdev)) { + atl1_down(adapter); + atl1_up(adapter); + } + + return 0; +} + +static void set_flow_ctrl_old(struct atl1_adapter *adapter) +{ + u32 hi, lo, value; + + /* RFD Flow Control */ + value = adapter->rfd_ring.count; + hi = value / 16; + if (hi < 2) + hi = 2; + lo = value * 7 / 8; + + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = adapter->rrd_ring.count; + lo = value / 16; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +static void set_flow_ctrl_new(struct atl1_hw *hw) +{ + u32 hi, lo, value; + + /* RXF Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); + lo = value / 16; + if (lo < 192) + lo = 192; + hi = value * 7 / 8; + if (hi < lo) + hi = lo + 16; + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); + lo = value / 8; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + if (hi < lo) + hi = lo + 3; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} + +/* + * atl1_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static u32 atl1_configure(struct atl1_adapter *adapter) +{ + struct atl1_hw *hw = &adapter->hw; + u32 value; + + /* clear interrupt status */ + iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); + + /* set MAC Address */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | + (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + + /* tx / rx ring */ + + /* HI base address */ + iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), + hw->hw_addr + REG_DESC_BASE_ADDR_HI); + /* LO base address */ + iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RFD_ADDR_LO); + iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RRD_ADDR_LO); + iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_TPD_ADDR_LO); + iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_CMB_ADDR_LO); + iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_SMB_ADDR_LO); + + /* element count */ + value = adapter->rrd_ring.count; + value <<= 16; + value += adapter->rfd_ring.count; + iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); + iowrite32(adapter->tpd_ring.count, hw->hw_addr + + REG_DESC_TPD_RING_SIZE); + + /* Load Ptr */ + iowrite32(1, hw->hw_addr + REG_LOAD_PTR); + + /* config Mailbox */ + value = ((atomic_read(&adapter->tpd_ring.next_to_use) + & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | + ((atomic_read(&adapter->rrd_ring.next_to_clean) + & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | + ((atomic_read(&adapter->rfd_ring.next_to_use) + & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAILBOX); + + /* config IPG/IFG */ + value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) + << MAC_IPG_IFG_IPGT_SHIFT) | + (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) + << MAC_IPG_IFG_MIFG_SHIFT) | + (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) + << MAC_IPG_IFG_IPGR1_SHIFT) | + (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) + << MAC_IPG_IFG_IPGR2_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); + + /* config Half-Duplex Control */ + value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | + (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) + << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | + MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | + (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | + (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) + << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); + + /* set Interrupt Moderator Timer */ + iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); + iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); + + /* set Interrupt Clear Timer */ + iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); + + /* set max frame size hw will accept */ + iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); + + /* jumbo size & rrd retirement timer */ + value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) + << RXQ_JMBOSZ_TH_SHIFT) | + (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) + << RXQ_JMBO_LKAH_SHIFT) | + (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) + << RXQ_RRD_TIMER_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); + + /* Flow Control */ + switch (hw->dev_rev) { + case 0x8001: + case 0x9001: + case 0x9002: + case 0x9003: + set_flow_ctrl_old(adapter); + break; + default: + set_flow_ctrl_new(hw); + break; + } + + /* config TXQ */ + value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) + << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | + (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) + << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | + (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) + << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | + TXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); + + /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ + value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) + << TX_JUMBO_TASK_TH_SHIFT) | + (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) + << TX_TPD_MIN_IPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); + + /* config RXQ */ + value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) + << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | + (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) + << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | + (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) + << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | + RXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); + + /* config DMA Engine */ + value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | + ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | + DMA_CTRL_DMAW_EN; + value |= (u32) hw->dma_ord; + if (atl1_rcb_128 == hw->rcb_value) + value |= DMA_CTRL_RCB_VALUE; + iowrite32(value, hw->hw_addr + REG_DMA_CTRL); + + /* config CMB / SMB */ + value = (hw->cmb_tpd > adapter->tpd_ring.count) ? + hw->cmb_tpd : adapter->tpd_ring.count; + value <<= 16; + value |= hw->cmb_rrd; + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); + value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); + iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); + + /* --- enable CMB / SMB */ + value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; + iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); + + value = ioread32(adapter->hw.hw_addr + REG_ISR); + if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) + value = 1; /* config failed */ + else + value = 0; + + /* clear all interrupt status */ + iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); + iowrite32(0, adapter->hw.hw_addr + REG_ISR); + return value; +} + +/* + * atl1_pcie_patch - Patch for PCIE module + */ +static void atl1_pcie_patch(struct atl1_adapter *adapter) +{ + u32 value; + + /* much vendor magic here */ + value = 0x6500; + iowrite32(value, adapter->hw.hw_addr + 0x12FC); + /* pcie flow control mode change */ + value = ioread32(adapter->hw.hw_addr + 0x1008); + value |= 0x8000; + iowrite32(value, adapter->hw.hw_addr + 0x1008); +} + +/* + * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 + * on PCI Command register is disable. + * The function enable this bit. + * Brackett, 2006/03/15 + */ +static void atl1_via_workaround(struct atl1_adapter *adapter) +{ + unsigned long value; + + value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); + if (value & PCI_COMMAND_INTX_DISABLE) + value &= ~PCI_COMMAND_INTX_DISABLE; + iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); +} + +static void atl1_inc_smb(struct atl1_adapter *adapter) +{ + struct stats_msg_block *smb = adapter->smb.smb; + + /* Fill out the OS statistics structure */ + adapter->soft_stats.rx_packets += smb->rx_ok; + adapter->soft_stats.tx_packets += smb->tx_ok; + adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; + adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; + adapter->soft_stats.multicast += smb->rx_mcast; + adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + + smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); + + /* Rx Errors */ + adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + + smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + + smb->rx_rrd_ov + smb->rx_align_err); + adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; + adapter->soft_stats.rx_length_errors += smb->rx_len_err; + adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; + adapter->soft_stats.rx_frame_errors += smb->rx_align_err; + adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + + smb->rx_rxf_ov); + + adapter->soft_stats.rx_pause += smb->rx_pause; + adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; + adapter->soft_stats.rx_trunc += smb->rx_sz_ov; + + /* Tx Errors */ + adapter->soft_stats.tx_errors += (smb->tx_late_col + + smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); + adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; + adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; + adapter->soft_stats.tx_window_errors += smb->tx_late_col; + + adapter->soft_stats.excecol += smb->tx_abort_col; + adapter->soft_stats.deffer += smb->tx_defer; + adapter->soft_stats.scc += smb->tx_1_col; + adapter->soft_stats.mcc += smb->tx_2_col; + adapter->soft_stats.latecol += smb->tx_late_col; + adapter->soft_stats.tx_underun += smb->tx_underrun; + adapter->soft_stats.tx_trunc += smb->tx_trunc; + adapter->soft_stats.tx_pause += smb->tx_pause; + + adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; + adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; + adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; + adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; + adapter->net_stats.multicast = adapter->soft_stats.multicast; + adapter->net_stats.collisions = adapter->soft_stats.collisions; + adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; + adapter->net_stats.rx_over_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.rx_length_errors = + adapter->soft_stats.rx_length_errors; + adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; + adapter->net_stats.rx_frame_errors = + adapter->soft_stats.rx_frame_errors; + adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; + adapter->net_stats.rx_missed_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; + adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; + adapter->net_stats.tx_aborted_errors = + adapter->soft_stats.tx_aborted_errors; + adapter->net_stats.tx_window_errors = + adapter->soft_stats.tx_window_errors; + adapter->net_stats.tx_carrier_errors = + adapter->soft_stats.tx_carrier_errors; +} + +static void atl1_update_mailbox(struct atl1_adapter *adapter) +{ + unsigned long flags; + u32 tpd_next_to_use; + u32 rfd_next_to_use; + u32 rrd_next_to_clean; + u32 value; + + spin_lock_irqsave(&adapter->mb_lock, flags); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); + + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + + spin_unlock_irqrestore(&adapter->mb_lock, flags); +} + +static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, u16 offset) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + + while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { + rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; + if (++rfd_ring->next_to_clean == rfd_ring->count) { + rfd_ring->next_to_clean = 0; + } + } +} + +static void atl1_update_rfd_index(struct atl1_adapter *adapter, + struct rx_return_desc *rrd) +{ + u16 num_buf; + + num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / + adapter->rx_buffer_len; + if (rrd->num_buf == num_buf) + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, num_buf); +} + +static void atl1_rx_checksum(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, struct sk_buff *skb) +{ + struct pci_dev *pdev = adapter->pdev; + + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | + ERR_FLAG_CODE | ERR_FLAG_OV)) { + adapter->hw_csum_err++; + dev_printk(KERN_DEBUG, &pdev->dev, + "rx checksum error\n"); + return; + } + } + + /* not IPv4 */ + if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) + /* checksum is invalid, but it's not an IPv4 pkt, so ok */ + return; + + /* IPv4 packet */ + if (likely(!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_good++; + return; + } + + /* IPv4, but hardware thinks its checksum is wrong */ + dev_printk(KERN_DEBUG, &pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); + adapter->hw_csum_err++; + return; +} + +/* + * atl1_alloc_rx_buffers - Replace used receive buffers + * @adapter: address of board private structure + */ +static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct pci_dev *pdev = adapter->pdev; + struct page *page; + unsigned long offset; + struct atl1_buffer *buffer_info, *next_info; + struct sk_buff *skb; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct rx_free_desc *rfd_desc; + + next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + + while (!buffer_info->alloced && !next_info->alloced) { + if (buffer_info->skb) { + buffer_info->alloced = 1; + goto next; + } + + rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); + + skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->net_stats.rx_dropped++; + break; + } + + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + buffer_info->alloced = 1; + buffer_info->skb = skb; + buffer_info->length = (u16) adapter->rx_buffer_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(pdev, page, offset, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); + rfd_desc->coalese = 0; + +next: + rfd_next_to_use = next_next; + if (unlikely(++next_next == rfd_ring->count)) + next_next = 0; + + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; + } + + if (num_alloc) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); + } + return num_alloc; +} + +static void atl1_intr_rx(struct atl1_adapter *adapter) +{ + int i, count; + u16 length; + u16 rrd_next_to_clean; + u32 value; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct rx_return_desc *rrd; + struct sk_buff *skb; + + count = 0; + + rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); + + while (1) { + rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); + i = 1; + if (likely(rrd->xsz.valid)) { /* packet valid */ +chk_rrd: + /* check rrd status */ + if (likely(rrd->num_buf == 1)) + goto rrd_ok; + + /* rrd seems to be bad */ + if (unlikely(i-- > 0)) { + /* rrd may not be DMAed completely */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "incomplete RRD DMA transfer\n"); + udelay(1); + goto chk_rrd; + } + /* bad rrd */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "bad RRD\n"); + /* see if update RFD index */ + if (rrd->num_buf > 1) + atl1_update_rfd_index(adapter, rrd); + + /* update rrd */ + rrd->xsz.valid = 0; + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + continue; + } else { /* current rrd still not be updated */ + + break; + } +rrd_ok: + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, 0); + + buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; + if (++rfd_ring->next_to_clean == rfd_ring->count) + rfd_ring->next_to_clean = 0; + + /* update rrd next to clean */ + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM + | ERR_FLAG_LEN))) { + /* packet error, don't need upstream */ + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + continue; + } + } + + /* Good Receive */ + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + skb = buffer_info->skb; + length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); + + skb_put(skb, length - ETH_FCS_LEN); + + /* Receive Checksum Offload */ + atl1_rx_checksum(adapter, rrd, skb); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { + u16 vlan_tag = (rrd->vlan_tag >> 4) | + ((rrd->vlan_tag & 7) << 13) | + ((rrd->vlan_tag & 8) << 9); + vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); + } else + netif_rx(skb); + + /* let protocol layer free skb */ + buffer_info->skb = NULL; + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + + adapter->netdev->last_rx = jiffies; + } + + atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); + + atl1_alloc_rx_buffers(adapter); + + /* update mailbox ? */ + if (count) { + u32 tpd_next_to_use; + u32 rfd_next_to_use; + + spin_lock(&adapter->mb_lock); + + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = + atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = + atomic_read(&adapter->rrd_ring.next_to_clean); + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + spin_unlock(&adapter->mb_lock); + } +} + +static void atl1_intr_tx(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 sw_tpd_next_to_clean; + u16 cmb_tpd_next_to_clean; + + sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); + cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); + + while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { + struct tx_packet_desc *tpd; + + tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); + buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; + if (buffer_info->dma) { + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } + tpd->buffer_addr = 0; + tpd->desc.data = 0; + + if (++sw_tpd_next_to_clean == tpd_ring->count) + sw_tpd_next_to_clean = 0; + } + atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); + + if (netif_queue_stopped(adapter->netdev) + && netif_carrier_ok(adapter->netdev)) + netif_wake_queue(adapter->netdev); +} + +static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) +{ + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 next_to_use = atomic_read(&tpd_ring->next_to_use); + return ((next_to_clean > next_to_use) ? + next_to_clean - next_to_use - 1 : + tpd_ring->count + next_to_clean - next_to_use - 1); +} + +static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tso_param *tso) +{ + /* We enter this function holding a spinlock. */ + u8 ipofst; + int err; + + if (skb_shinfo(skb)->gso_size) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return err; + } + + if (skb->protocol == ntohs(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, IPPROTO_TCP, 0); + ipofst = skb_network_offset(skb); + if (ipofst != ETH_HLEN) /* 802.3 frame */ + tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; + + tso->tsopl |= (iph->ihl & + CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; + tso->tsopl |= (tcp_hdrlen(skb) & + TSO_PARAM_TCPHDRLEN_MASK) << + TSO_PARAM_TCPHDRLEN_SHIFT; + tso->tsopl |= (skb_shinfo(skb)->gso_size & + TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; + tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; + return true; + } + } + return false; +} + +static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, + struct csum_param *csum) +{ + u8 css, cso; + + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + cso = skb_transport_offset(skb); + css = cso + skb->csum_offset; + if (unlikely(cso & 0x1)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "payload offset not an even number\n"); + return -1; + } + csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << + CSUM_PARAM_PLOADOFFSET_SHIFT; + csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << + CSUM_PARAM_XSUMOFFSET_SHIFT; + csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; + return true; + } + + return true; +} + +static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, + bool tcp_seg) +{ + /* We enter this function holding a spinlock. */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct page *page; + int first_buf_len = skb->len; + unsigned long offset; + unsigned int nr_frags; + unsigned int f; + u16 tpd_next_to_use; + u16 proto_hdr_len; + u16 len12; + + first_buf_len -= skb->data_len; + nr_frags = skb_shinfo(skb)->nr_frags; + tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + /* put skb in last TPD */ + buffer_info->skb = NULL; + + if (tcp_seg) { + /* TSO/GSO */ + proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + buffer_info->length = proto_hdr_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, proto_hdr_len, + PCI_DMA_TODEVICE); + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + + if (first_buf_len > proto_hdr_len) { + int i, m; + + len12 = first_buf_len - proto_hdr_len; + m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < m; i++) { + buffer_info = + &tpd_ring->buffer_info[tpd_next_to_use]; + buffer_info->skb = NULL; + buffer_info->length = + (ATL1_MAX_TX_BUF_LEN >= + len12) ? ATL1_MAX_TX_BUF_LEN : len12; + len12 -= buffer_info->length; + page = virt_to_page(skb->data + + (proto_hdr_len + + i * ATL1_MAX_TX_BUF_LEN)); + offset = (unsigned long)(skb->data + + (proto_hdr_len + + i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, + page, offset, buffer_info->length, + PCI_DMA_TODEVICE); + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + } + } else { + /* not TSO/GSO */ + buffer_info->length = first_buf_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, first_buf_len, PCI_DMA_TODEVICE); + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + u16 lenf, i, m; + + frag = &skb_shinfo(skb)->frags[f]; + lenf = frag->size; + + m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < m; i++) { + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + buffer_info->skb = NULL; + buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? + ATL1_MAX_TX_BUF_LEN : lenf; + lenf -= buffer_info->length; + buffer_info->dma = pci_map_page(adapter->pdev, + frag->page, + frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), + buffer_info->length, PCI_DMA_TODEVICE); + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + } + + /* last tpd's buffer-info */ + buffer_info->skb = skb; +} + +static void atl1_tx_queue(struct atl1_adapter *adapter, int count, + union tpd_descr *descr) +{ + /* We enter this function holding a spinlock. */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + int j; + u32 val; + struct atl1_buffer *buffer_info; + struct tx_packet_desc *tpd; + u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); + + for (j = 0; j < count; j++) { + buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); + tpd->desc.csum.csumpu = descr->csum.csumpu; + tpd->desc.csum.csumpl = descr->csum.csumpl; + tpd->desc.tso.tsopu = descr->tso.tsopu; + tpd->desc.tso.tsopl = descr->tso.tsopl; + tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + tpd->desc.data = descr->data; + tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & + CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; + + val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & + TSO_PARAM_SEGMENT_MASK; + if (val && !j) + tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; + + if (j == (count - 1)) + tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; + + if (++tpd_next_to_use == tpd_ring->count) + tpd_next_to_use = 0; + } + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); +} + +static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int len = skb->len; + int tso; + int count = 1; + int ret_val; + u32 val; + union tpd_descr param; + u16 frag_size; + u16 vlan_tag; + unsigned long flags; + unsigned int nr_frags = 0; + unsigned int mss = 0; + unsigned int f; + unsigned int proto_hdr_len; + + len -= skb->data_len; + + if (unlikely(skb->len == 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + param.data = 0; + param.tso.tsopu = 0; + param.tso.tsopl = 0; + param.csum.csumpu = 0; + param.csum.csumpl = 0; + + /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ + nr_frags = skb_shinfo(skb)->nr_frags; + for (f = 0; f < nr_frags; f++) { + frag_size = skb_shinfo(skb)->frags[f].size; + if (frag_size) + count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + + /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ + mss = skb_shinfo(skb)->gso_size; + if (mss) { + if (skb->protocol == htons(ETH_P_IP)) { + proto_hdr_len = (skb_transport_offset(skb) + + tcp_hdrlen(skb)); + if (unlikely(proto_hdr_len > len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* need additional TPD ? */ + if (proto_hdr_len != len) + count += (len - proto_hdr_len + + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + } + + if (!spin_trylock_irqsave(&adapter->lock, flags)) { + /* Can't get lock - tell upper layer to requeue */ + dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); + return NETDEV_TX_LOCKED; + } + + if (atl1_tpd_avail(&adapter->tpd_ring) < count) { + /* not enough descriptors */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->lock, flags); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); + return NETDEV_TX_BUSY; + } + + param.data = 0; + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + vlan_tag = vlan_tx_tag_get(skb); + vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | + ((vlan_tag >> 9) & 0x8); + param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; + param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << + CSUM_PARAM_VALAN_SHIFT; + } + + tso = atl1_tso(adapter, skb, ¶m.tso); + if (tso < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (!tso) { + ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); + if (ret_val < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + + val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & + CSUM_PARAM_SEGMENT_MASK; + atl1_tx_map(adapter, skb, 1 == val); + atl1_tx_queue(adapter, count, ¶m); + netdev->trans_start = jiffies; + spin_unlock_irqrestore(&adapter->lock, flags); + atl1_update_mailbox(adapter); + return NETDEV_TX_OK; +} + +/* + * atl1_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1_intr(int irq, void *data) +{ + struct atl1_adapter *adapter = netdev_priv(data); + u32 status; + u8 update_rx; + int max_ints = 10; + + status = adapter->cmb.cmb->int_stats; + if (!status) + return IRQ_NONE; + + update_rx = 0; + + do { + /* clear CMB interrupt status at once */ + adapter->cmb.cmb->int_stats = 0; + + if (status & ISR_GPHY) /* clear phy status */ + atlx_clear_phy_int(adapter); + + /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ + iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); + + /* check if SMB intr */ + if (status & ISR_SMB) + atl1_inc_smb(adapter); + + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie phy link down %x\n", status); + if (netif_running(adapter->netdev)) { /* reset MAC */ + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; + } + } + + /* check if DMA read/write error ? */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; + } + + /* link event */ + if (status & ISR_GPHY) { + adapter->soft_stats.tx_carrier_errors++; + atl1_check_for_link(adapter); + } + + /* transmit event */ + if (status & ISR_CMB_TX) + atl1_intr_tx(adapter); + + /* rx exception */ + if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV | ISR_CMB_RX))) { + if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", status); + atl1_intr_rx(adapter); + } + + if (--max_ints < 0) + break; + + } while ((status = adapter->cmb.cmb->int_stats)); + + /* re-enable Interrupt */ + iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); + return IRQ_HANDLED; +} + +/* + * atl1_watchdog - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_watchdog(unsigned long data) +{ + struct atl1_adapter *adapter = (struct atl1_adapter *)data; + + /* Reset the timer */ + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); +} + +/* + * atl1_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_phy_config(unsigned long data) +{ + struct atl1_adapter *adapter = (struct atl1_adapter *)data; + struct atl1_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + adapter->phy_timer_pending = false; + atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); + atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +/* + * Orphaned vendor comment left intact here: + * + * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT + * will assert. We do soft reset <0x1400=1> according + * with the SPEC. BUT, it seemes that PCIE or DMA + * state-machine will not be reset. DMAR_TO_INT will + * assert again and again. + * + */ +static void atl1_tx_timeout_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, tx_timeout_task); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1_down(adapter); + atl1_up(adapter); + netif_device_attach(netdev); +} + +int atl1_reset(struct atl1_adapter *adapter) +{ + int ret; + ret = atl1_reset_hw(&adapter->hw); + if (ret) + return ret; + return atl1_init_hw(&adapter->hw); +} + +s32 atl1_up(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + int irq_flags = IRQF_SAMPLE_RANDOM; + + /* hardware has been reset, we need to reload some things */ + atlx_set_multi(netdev); + atl1_init_ring_ptrs(adapter); + atlx_restore_vlan(adapter); + err = atl1_alloc_rx_buffers(adapter); + if (unlikely(!err)) + /* no RX BUFFER allocated */ + return -ENOMEM; + + if (unlikely(atl1_configure(adapter))) { + err = -EIO; + goto err_up; + } + + err = pci_enable_msi(adapter->pdev); + if (err) { + dev_info(&adapter->pdev->dev, + "Unable to enable MSI: %d\n", err); + irq_flags |= IRQF_SHARED; + } + + err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, + netdev->name, netdev); + if (unlikely(err)) + goto err_up; + + mod_timer(&adapter->watchdog_timer, jiffies); + atlx_irq_enable(adapter); + atl1_check_link(adapter); + return 0; + +err_up: + pci_disable_msi(adapter->pdev); + /* free rx_buffers */ + atl1_clean_rx_ring(adapter); + return err; +} + +void atl1_down(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_config_timer); + adapter->phy_timer_pending = false; + + atlx_irq_disable(adapter); + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + atl1_reset_hw(&adapter->hw); + adapter->cmb.cmb->int_stats = 0; + + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); +} + +/* + * atl1_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1_open(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int err; + + /* allocate transmit descriptors */ + err = atl1_setup_ring_resources(adapter); + if (err) + return err; + + err = atl1_up(adapter); + if (err) + goto err_up; + + return 0; + +err_up: + atl1_reset(adapter); + return err; +} + +/* + * atl1_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1_close(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + atl1_down(adapter); + atl1_free_ring_resources(adapter); + return 0; +} + +#ifdef CONFIG_PM +static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u32 ctrl = 0; + u32 wufc = adapter->wol; + + netif_device_detach(netdev); + if (netif_running(netdev)) + atl1_down(adapter); + + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + if (ctrl & BMSR_LSTATUS) + wufc &= ~ATLX_WUFC_LNKC; + + /* reduce speed to 10/100M */ + if (wufc) { + atl1_phy_enter_power_saving(hw); + /* if resume, let driver to re- setup link */ + hw->phy_configured = false; + atl1_set_mac_addr(hw); + atlx_set_multi(netdev); + + ctrl = 0; + /* turn on magic packet wol */ + if (wufc & ATLX_WUFC_MAG) + ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + + /* turn on Link change WOL */ + if (wufc & ATLX_WUFC_LNKC) + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + + /* turn on all-multi mode if wake on multicast is enabled */ + ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); + ctrl &= ~MAC_CTRL_DBG; + ctrl &= ~MAC_CTRL_PROMIS_EN; + if (wufc & ATLX_WUFC_MC) + ctrl |= MAC_CTRL_MC_ALL_EN; + else + ctrl &= ~MAC_CTRL_MC_ALL_EN; + + /* turn on broadcast mode if wake on-BC is enabled */ + if (wufc & ATLX_WUFC_BC) + ctrl |= MAC_CTRL_BC_EN; + else + ctrl &= ~MAC_CTRL_BC_EN; + + /* enable RX */ + ctrl |= MAC_CTRL_RX_EN; + iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + iowrite32(0, hw->hw_addr + REG_WOL_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + } + + pci_save_state(pdev); + pci_disable_device(pdev); + + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int atl1_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* FIXME: check and handle */ + err = pci_enable_device(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); + atl1_reset(adapter); + + if (netif_running(netdev)) + atl1_up(adapter); + netif_device_attach(netdev); + + atl1_via_workaround(adapter); + + return 0; +} +#else +#define atl1_suspend NULL +#define atl1_resume NULL +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void atl1_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + atl1_intr(netdev->irq, netdev); + enable_irq(netdev->irq); +} +#endif + +/* + * atl1_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int __devinit atl1_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1_adapter *adapter; + static int cards_found = 0; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + /* + * The atl1 chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; + } + /* + * Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl1_driver_name + */ + err = pci_request_regions(pdev, ATLX_DRIVER_NAME); + if (err) + goto err_request_regions; + + /* + * Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings + */ + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + + adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_pci_iomap; + } + /* get device revision number */ + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); + + /* set default ring resource counts */ + adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; + adapter->tpd_ring.count = ATL1_DEFAULT_TPD; + + adapter->mii.dev = netdev; + adapter->mii.mdio_read = mdio_read; + adapter->mii.mdio_write = mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = 0x1f; + + netdev->open = &atl1_open; + netdev->stop = &atl1_close; + netdev->hard_start_xmit = &atl1_xmit_frame; + netdev->get_stats = &atlx_get_stats; + netdev->set_multicast_list = &atlx_set_multi; + netdev->set_mac_address = &atl1_set_mac; + netdev->change_mtu = &atl1_change_mtu; + netdev->do_ioctl = &atlx_ioctl; + netdev->tx_timeout = &atlx_tx_timeout; + netdev->watchdog_timeo = 5 * HZ; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = atl1_poll_controller; +#endif + netdev->vlan_rx_register = atlx_vlan_rx_register; + + netdev->ethtool_ops = &atl1_ethtool_ops; + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = atl1_sw_init(adapter); + if (err) + goto err_common; + + netdev->features = NETIF_F_HW_CSUM; + netdev->features |= NETIF_F_SG; + netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); + + /* + * FIXME - Until tso performance gets fixed, disable the feature. + * Enable it with ethtool -K if desired. + */ + /* netdev->features |= NETIF_F_TSO; */ + + netdev->features |= NETIF_F_LLTX; + + /* + * patch for some L1 of old version, + * the final version of L1 may not need these + * patches + */ + /* atl1_pcie_patch(adapter); */ + + /* really reset GPHY core */ + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + + /* + * reset the controller to + * put the device in a known good starting state + */ + if (atl1_reset_hw(&adapter->hw)) { + err = -EIO; + goto err_common; + } + + /* copy the MAC address out of the EEPROM */ + atl1_read_mac_addr(&adapter->hw); + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->dev_addr)) { + err = -EIO; + goto err_common; + } + + atl1_check_options(adapter); + + /* pre-init the MAC, and setup link */ + err = atl1_init_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_common; + } + + atl1_pcie_patch(adapter); + /* assume we have no link for now */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &atl1_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; + + init_timer(&adapter->phy_config_timer); + adapter->phy_config_timer.function = &atl1_phy_config; + adapter->phy_config_timer.data = (unsigned long)adapter; + adapter->phy_timer_pending = false; + + INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); + + INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); + + INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); + + err = register_netdev(netdev); + if (err) + goto err_common; + + cards_found++; + atl1_via_workaround(adapter); + return 0; + +err_common: + pci_iounmap(pdev, adapter->hw.hw_addr); +err_pci_iomap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_dma: +err_request_regions: + pci_disable_device(pdev); + return err; +} + +/* + * atl1_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void __devexit atl1_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter; + /* Device not available. Return. */ + if (!netdev) + return; + + adapter = netdev_priv(netdev); + + /* + * Some atl1 boards lack persistent storage for their MAC, and get it + * from the BIOS during POST. If we've been messing with the MAC + * address, we need to save the permanent one. + */ + if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { + memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, + ETH_ALEN); + atl1_set_mac_addr(&adapter->hw); + } + + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + unregister_netdev(netdev); + pci_iounmap(pdev, adapter->hw.hw_addr); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); +} + +static struct pci_driver atl1_driver = { + .name = ATLX_DRIVER_NAME, + .id_table = atl1_pci_tbl, + .probe = atl1_probe, + .remove = __devexit_p(atl1_remove), + .suspend = atl1_suspend, + .resume = atl1_resume +}; + +/* + * atl1_exit_module - Driver Exit Cleanup Routine + * + * atl1_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl1_exit_module(void) +{ + pci_unregister_driver(&atl1_driver); +} + +/* + * atl1_init_module - Driver Registration Routine + * + * atl1_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl1_init_module(void) +{ + return pci_register_driver(&atl1_driver); +} + +module_init(atl1_init_module); +module_exit(atl1_exit_module); + +struct atl1_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define ATL1_STAT(m) \ + sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) + +static struct atl1_stats atl1_gstrings_stats[] = { + {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, + {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, + {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, + {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, + {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, + {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, + {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, + {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, + {"multicast", ATL1_STAT(soft_stats.multicast)}, + {"collisions", ATL1_STAT(soft_stats.collisions)}, + {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, + {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, + {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, + {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, + {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, + {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, + {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, + {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, + {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, + {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, + {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, + {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, + {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, + {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, + {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, + {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, + {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, + {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, + {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} +}; + +static void atl1_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int i; + char *p; + + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; + data[i] = (atl1_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + +} + +static int atl1_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(atl1_gstrings_stats); + default: + return -EOPNOTSUPP; + } +} + +static int atl1_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + ecmd->advertising |= ADVERTISED_Autoneg; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->advertising |= + (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + } else + ecmd->advertising |= (ADVERTISED_1000baseT_Full); + } + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (netif_carrier_ok(adapter->netdev)) { + u16 link_speed, link_duplex; + atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); + ecmd->speed = link_speed; + if (link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; + + return 0; +} + +static int atl1_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + u16 phy_data; + int ret_val = 0; + u16 old_media_type = hw->media_type; + + if (netif_running(adapter->netdev)) { + dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); + atl1_down(adapter); + } + + if (ecmd->autoneg == AUTONEG_ENABLE) + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + else { + if (ecmd->speed == SPEED_1000) { + if (ecmd->duplex != DUPLEX_FULL) { + dev_warn(&adapter->pdev->dev, + "can't force to 1000M half duplex\n"); + ret_val = -EINVAL; + goto exit_sset; + } + hw->media_type = MEDIA_TYPE_1000M_FULL; + } else if (ecmd->speed == SPEED_100) { + if (ecmd->duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_100M_FULL; + else + hw->media_type = MEDIA_TYPE_100M_HALF; + } else { + if (ecmd->duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_10M_FULL; + else + hw->media_type = MEDIA_TYPE_10M_HALF; + } + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ecmd->advertising = + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + case MEDIA_TYPE_1000M_FULL: + ecmd->advertising = + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + default: + ecmd->advertising = 0; + break; + } + if (atl1_phy_setup_autoneg_adv(hw)) { + ret_val = -EINVAL; + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); + goto exit_sset; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); +exit_sset: + if (ret_val) + hw->media_type = old_media_type; + + if (netif_running(adapter->netdev)) { + dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); + atl1_up(adapter); + } else if (!ret_val) { + dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); + atl1_reset(adapter); + } + return ret_val; +} + +static void atl1_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); + strncpy(drvinfo->version, ATLX_DRIVER_VERSION, + sizeof(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->eedump_len = ATL1_EEDUMP_LEN; +} + +static void atl1_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + if (adapter->wol & ATLX_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & ATLX_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & ATLX_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & ATLX_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + return; +} + +static int atl1_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + adapter->wol = 0; + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= ATLX_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= ATLX_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= ATLX_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= ATLX_WUFC_MAG; + return 0; +} + +static void atl1_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *txdr = &adapter->tpd_ring; + struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; + + ring->rx_max_pending = ATL1_MAX_RFD; + ring->tx_max_pending = ATL1_MAX_TPD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int atl1_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; + struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; + struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; + + struct atl1_tpd_ring tpd_old, tpd_new; + struct atl1_rfd_ring rfd_old, rfd_new; + struct atl1_rrd_ring rrd_old, rrd_new; + struct atl1_ring_header rhdr_old, rhdr_new; + int err; + + tpd_old = adapter->tpd_ring; + rfd_old = adapter->rfd_ring; + rrd_old = adapter->rrd_ring; + rhdr_old = adapter->ring_header; + + if (netif_running(adapter->netdev)) + atl1_down(adapter); + + rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); + rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : + rfdr->count; + rfdr->count = (rfdr->count + 3) & ~3; + rrdr->count = rfdr->count; + + tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); + tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : + tpdr->count; + tpdr->count = (tpdr->count + 3) & ~3; + + if (netif_running(adapter->netdev)) { + /* try to get new resources before deleting old */ + err = atl1_setup_ring_resources(adapter); + if (err) + goto err_setup_ring; + + /* + * save the new, restore the old in order to free it, + * then restore the new back again + */ + + rfd_new = adapter->rfd_ring; + rrd_new = adapter->rrd_ring; + tpd_new = adapter->tpd_ring; + rhdr_new = adapter->ring_header; + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_free_ring_resources(adapter); + adapter->rfd_ring = rfd_new; + adapter->rrd_ring = rrd_new; + adapter->tpd_ring = tpd_new; + adapter->ring_header = rhdr_new; + + err = atl1_up(adapter); + if (err) + return err; + } + return 0; + +err_setup_ring: + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_up(adapter); + return err; +} + +static void atl1_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + epause->rx_pause = 1; + epause->tx_pause = 1; +} + +static int atl1_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + + epause->rx_pause = 1; + epause->tx_pause = 1; + + return 0; +} + +/* FIXME: is this right? -- CHS */ +static u32 atl1_get_rx_csum(struct net_device *netdev) +{ + return 1; +} + +static void atl1_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + memcpy(p, atl1_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static int atl1_nway_reset(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + if (netif_running(netdev)) { + u16 phy_data; + atl1_down(adapter); + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + } else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + atl1_up(adapter); + } + return 0; +} + +const struct ethtool_ops atl1_ethtool_ops = { + .get_settings = atl1_get_settings, + .set_settings = atl1_set_settings, + .get_drvinfo = atl1_get_drvinfo, + .get_wol = atl1_get_wol, + .set_wol = atl1_set_wol, + .get_ringparam = atl1_get_ringparam, + .set_ringparam = atl1_set_ringparam, + .get_pauseparam = atl1_get_pauseparam, + .set_pauseparam = atl1_set_pauseparam, + .get_rx_csum = atl1_get_rx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_link = ethtool_op_get_link, + .set_sg = ethtool_op_set_sg, + .get_strings = atl1_get_strings, + .nway_reset = atl1_nway_reset, + .get_ethtool_stats = atl1_get_ethtool_stats, + .get_sset_count = atl1_get_sset_count, + .set_tso = ethtool_op_set_tso, +}; + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +s32 atl1_reset_hw(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + u32 icr; + int i; + + /* + * Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* + * iowrite32(0, hw->hw_addr + REG_IMR); + * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); + */ + + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); + ioread32(hw->hw_addr + REG_MASTER_CTRL); + + iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); + ioread16(hw->hw_addr + REG_PHY_ENABLE); + + /* delay about 1ms */ + msleep(1); + + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); + if (!icr) + break; + /* delay 1 ms */ + msleep(1); + /* FIXME: still the right way to do this? */ + cpu_relax(); + } + + if (icr) { + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + return icr; + } + + return 0; +} + +/* function about EEPROM + * + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl1_check_eeprom_exist(struct atl1_hw *hw) +{ + u32 value; + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + } + + value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) +{ + int i; + u32 control; + + if (offset & 3) + /* address do not align */ + return false; + + iowrite32(0, hw->hw_addr + REG_VPD_DATA); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + iowrite32(control, hw->hw_addr + REG_VPD_CAP); + ioread32(hw->hw_addr + REG_VPD_CAP); + + for (i = 0; i < 10; i++) { + msleep(2); + control = ioread32(hw->hw_addr + REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); + return true; + } + /* timeout */ + return false; +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16) val; + return 0; + } + return ATLX_ERR_PHY; +} + +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 + +static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; + + iowrite32(0, hw->hw_addr + REG_SPI_DATA); + iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & + SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & + SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & + SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & + SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << + SPI_FLASH_CTRL_INS_SHIFT; + + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + + value |= SPI_FLASH_CTRL_START; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + + for (i = 0; i < 10; i++) { + msleep(1); + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } + + if (value & SPI_FLASH_CTRL_START) + return false; + + *buf = ioread32(hw->hw_addr + REG_SPI_DATA); + + return true; +} + +/* + * get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1_get_permanent_address(struct atl1_hw *hw) +{ + u32 addr[2]; + u32 i, control; + u16 reg; + u8 eth_addr[ETH_ALEN]; + bool key_valid; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1_check_eeprom_exist(hw)) { + reg = 0; + key_valid = false; + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl1_read_eeprom(hw, i + 0x100, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + return 1; + } + + /* see if SPI FLAGS exist ? */ + addr[0] = addr[1] = 0; + reg = 0; + key_valid = false; + i = 0; + while (1) { + if (atl1_spi_read(hw, i + 0x1f000, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + /* data end */ + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + /* + * On some motherboards, the MAC address is written by the + * BIOS directly to the MAC register during POST, and is + * not stored in eeprom. If all else thus far has failed + * to fetch the permanent MAC address, try reading it directly. + */ + addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); + addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return 1; +} + +/* + * Reads the adapter's MAC address from the EEPROM + * hw - Struct containing variables accessed by shared code + */ +s32 atl1_read_mac_addr(struct atl1_hw *hw) +{ + u16 i; + + if (atl1_get_permanent_address(hw)) + random_ether_addr(hw->perm_mac_addr); + + for (i = 0; i < ETH_ALEN; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return 0; +} + +/* + * Hashes an address to determine its location in the multicast table + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * atl1_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) +{ + u32 crc32, value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + mta |= (1 << hash_bit); + iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return ATLX_ERR_PHY; +} + +/* + * Make L001's PHY out of Power Saving State (bug) + * hw - Struct containing variables accessed by shared code + * when power on, L001's PHY always on Power saving State + * (Gigabit Link forbidden) + */ +static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +{ + s32 ret; + ret = atl1_write_phy_reg(hw, 29, 0x0029); + if (ret) + return ret; + return atl1_write_phy_reg(hw, 30, 0); +} + +/* + *TODO: do something or get rid of this + */ +s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +{ +/* s32 ret_val; + * u16 phy_data; + */ + +/* + ret_val = atl1_write_phy_reg(hw, ...); + ret_val = atl1_write_phy_reg(hw, ...); + .... +*/ + return 0; +} + +/* + * Resets the PHY and make all config validate + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl1_phy_reset(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + u16 phy_data; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + + ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down! */ + dev_dbg(&pdev->dev, "pcie phy link down\n"); + + for (i = 0; i < 25; i++) { + msleep(1); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if ((val & (MDIO_START | MDIO_BUSY)) != 0) { + dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); + return ret_val; + } + } + return 0; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * hw - Struct containing variables accessed by shared code + */ +s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) +{ + s32 ret_val; + s16 mii_autoneg_adv_reg; + s16 mii_1000t_ctrl_reg; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + + /* Read the MII 1000Base-T Control Register (Address 9). */ + mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; + + /* + * Need to parse media_type and set up + * the appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_1000M_FULL: + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + break; + + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + break; + + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + break; + + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + + ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + + return 0; +} + +/* + * Configures link settings. + * hw - Struct containing variables accessed by shared code + * Assumes the hardware has previously been reset and the + * transmitter and receiver are not enabled. + */ +static s32 atl1_setup_link(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + + /* + * Options: + * PHY will advertise value(s) parsed from + * autoneg_advertised and fc + * no matter what autoneg is , We will not wait link result. + */ + ret_val = atl1_phy_setup_autoneg_adv(hw); + if (ret_val) { + dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); + return ret_val; + } + /* SW.Reset , En-Auto-Neg if needed */ + ret_val = atl1_phy_reset(hw); + if (ret_val) { + dev_dbg(&pdev->dev, "error resetting phy\n"); + return ret_val; + } + hw->phy_configured = true; + return ret_val; +} + +static void atl1_init_flash_opcode(struct atl1_hw *hw) +{ + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + /* Atmel */ + hw->flash_vendor = 0; + + /* Init OP table */ + iowrite8(flash_table[hw->flash_vendor].cmd_program, + hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); + iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, + hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, + hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_rdid, + hw->hw_addr + REG_SPI_FLASH_OP_RDID); + iowrite8(flash_table[hw->flash_vendor].cmd_wren, + hw->hw_addr + REG_SPI_FLASH_OP_WREN); + iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, + hw->hw_addr + REG_SPI_FLASH_OP_RDSR); + iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, + hw->hw_addr + REG_SPI_FLASH_OP_WRSR); + iowrite8(flash_table[hw->flash_vendor].cmd_read, + hw->hw_addr + REG_SPI_FLASH_OP_READ); +} + +/* + * Performs basic configuration of the adapter. + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +s32 atl1_init_hw(struct atl1_hw *hw) +{ + u32 ret_val = 0; + + /* Zero out the Multicast HASH table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + /* clear the old settings from the multicast hash table */ + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + atl1_init_flash_opcode(hw); + + if (!hw->phy_configured) { + /* enable GPHY LinkChange Interrrupt */ + ret_val = atl1_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + /* make PHY out of power-saving state */ + ret_val = atl1_phy_leave_power_saving(hw); + if (ret_val) + return ret_val; + /* Call a subroutine to configure the link */ + ret_val = atl1_setup_link(hw); + } + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) +{ + struct pci_dev *pdev = hw->back->pdev; + s32 ret_val; + u16 phy_data; + + /* ; --- Read PHY Specific Status Register (17) */ + ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) + return ATLX_ERR_PHY_RES; + + switch (phy_data & MII_ATLX_PSSR_SPEED) { + case MII_ATLX_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_ATLX_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_ATLX_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + dev_dbg(&pdev->dev, "error getting speed\n"); + return ATLX_ERR_PHY_SPEED; + break; + } + if (phy_data & MII_ATLX_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +void atl1_set_mac_addr(struct atl1_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + /* high dword */ + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); +} diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index ff4765f6..538948d 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -1,6 +1,6 @@ /* * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook + * Copyright(c) 2006 - 2007 Chris Snook * Copyright(c) 2006 Jay Cliburn * * Derived from Intel e1000 driver @@ -21,26 +21,559 @@ * Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#ifndef _ATL1_H_ -#define _ATL1_H_ +#ifndef ATL1_H +#define ATL1_H -#include +#include +#include #include +#include +#include +#include +#include +#include +#include +#include + +#include "atlx.h" + +#define ATLX_DRIVER_NAME "atl1" -#include "atl1_hw.h" +MODULE_DESCRIPTION("Atheros L1 Gigabit Ethernet Driver"); + +#define atlx_adapter atl1_adapter +#define atlx_check_for_link atl1_check_for_link +#define atlx_check_link atl1_check_link +#define atlx_hash_mc_addr atl1_hash_mc_addr +#define atlx_hash_set atl1_hash_set +#define atlx_hw atl1_hw +#define atlx_mii_ioctl atl1_mii_ioctl +#define atlx_read_phy_reg atl1_read_phy_reg +#define atlx_set_mac atl1_set_mac +#define atlx_set_mac_addr atl1_set_mac_addr + +struct atl1_adapter; +struct atl1_hw; /* function prototypes needed by multiple files */ +s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); +s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); +s32 atl1_read_mac_addr(struct atl1_hw *hw); +s32 atl1_init_hw(struct atl1_hw *hw); +s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); +s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); +void atl1_set_mac_addr(struct atl1_hw *hw); +s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); +s32 atl1_reset_hw(struct atl1_hw *hw); +void atl1_check_options(struct atl1_adapter *adapter); +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, + int cmd); +static u32 atl1_check_link(struct atl1_adapter *adapter); s32 atl1_up(struct atl1_adapter *adapter); void atl1_down(struct atl1_adapter *adapter); int atl1_reset(struct atl1_adapter *adapter); -s32 atl1_setup_ring_resources(struct atl1_adapter *adapter); -void atl1_free_ring_resources(struct atl1_adapter *adapter); -extern char atl1_driver_name[]; -extern char atl1_driver_version[]; extern const struct ethtool_ops atl1_ethtool_ops; -struct atl1_adapter; +/* hardware definitions specific to L1 */ + +/* Block IDLE Status Register */ +#define IDLE_STATUS_RXMAC 0x1 +#define IDLE_STATUS_TXMAC 0x2 +#define IDLE_STATUS_RXQ 0x4 +#define IDLE_STATUS_TXQ 0x8 +#define IDLE_STATUS_DMAR 0x10 +#define IDLE_STATUS_DMAW 0x20 +#define IDLE_STATUS_SMB 0x40 +#define IDLE_STATUS_CMB 0x80 + +/* MDIO Control Register */ +#define MDIO_WAIT_TIMES 30 + +/* MAC Control Register */ +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x300000 +#define MAC_CTRL_SPEED_1000 0x2 +#define MAC_CTRL_SPEED_10_100 0x1 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_DBG 0x8000000 + +/* Wake-On-Lan control register */ +#define WOL_CLK_SWITCH_EN 0x8000 +#define WOL_PT5_EN 0x200000 +#define WOL_PT6_EN 0x400000 +#define WOL_PT5_MATCH 0x8000000 +#define WOL_PT6_MATCH 0x10000000 + +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14A4 +#define WOL_PT_LEN_MASK 0x7F +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Registers, low 32 bits */ +#define REG_SRAM_RFD_LEN 0x1504 +#define REG_SRAM_RRD_ADDR 0x1508 +#define REG_SRAM_RRD_LEN 0x150C +#define REG_SRAM_TPD_ADDR 0x1510 +#define REG_SRAM_TPD_LEN 0x1514 +#define REG_SRAM_TRD_ADDR 0x1518 +#define REG_SRAM_TRD_LEN 0x151C +#define REG_SRAM_RXF_ADDR 0x1520 +#define REG_SRAM_RXF_LEN 0x1524 +#define REG_SRAM_TXF_ADDR 0x1528 +#define REG_SRAM_TXF_LEN 0x152C +#define REG_SRAM_TCPH_PATH_ADDR 0x1530 +#define SRAM_TCPH_ADDR_MASK 0xFFF +#define SRAM_TCPH_ADDR_SHIFT 0 +#define SRAM_PATH_ADDR_MASK 0xFFF +#define SRAM_PATH_ADDR_SHIFT 16 + +/* Load Ptr Register */ +#define REG_LOAD_PTR 0x1534 + +/* Descriptor Control registers, low 32 bits */ +#define REG_DESC_RFD_ADDR_LO 0x1544 +#define REG_DESC_RRD_ADDR_LO 0x1548 +#define REG_DESC_TPD_ADDR_LO 0x154C +#define REG_DESC_CMB_ADDR_LO 0x1550 +#define REG_DESC_SMB_ADDR_LO 0x1554 +#define REG_DESC_RFD_RRD_RING_SIZE 0x1558 +#define DESC_RFD_RING_SIZE_MASK 0x7FF +#define DESC_RFD_RING_SIZE_SHIFT 0 +#define DESC_RRD_RING_SIZE_MASK 0x7FF +#define DESC_RRD_RING_SIZE_SHIFT 16 +#define REG_DESC_TPD_RING_SIZE 0x155C +#define DESC_TPD_RING_SIZE_MASK 0x3FF +#define DESC_TPD_RING_SIZE_SHIFT 0 + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1580 +#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 +#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1F +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 +#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3F +#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 +#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xFFFF + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 +#define TX_JUMBO_TASK_TH_MASK 0x7FF +#define TX_JUMBO_TASK_TH_SHIFT 0 +#define TX_TPD_MIN_IPG_MASK 0x1F +#define TX_TPD_MIN_IPG_SHIFT 16 + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15A0 +#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 +#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xFF +#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 +#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xFF +#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 +#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1F +#define RXQ_CTRL_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +/* Rx jumbo packet threshold and rrd retirement timer */ +#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4 +#define RXQ_JMBOSZ_TH_MASK 0x7FF +#define RXQ_JMBOSZ_TH_SHIFT 0 +#define RXQ_JMBO_LKAH_MASK 0xF +#define RXQ_JMBO_LKAH_SHIFT 11 +#define RXQ_RRD_TIMER_MASK 0xFFFF +#define RXQ_RRD_TIMER_SHIFT 16 + +/* RFD flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0xFFF +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0xFFF + +/* RRD flow control register */ +#define REG_RXQ_RRD_PAUSE_THRESH 0x15AC +#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RRD_PAUSE_TH_HI_MASK 0xFFF +#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RRD_PAUSE_TH_LO_MASK 0xFFF + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15C0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAR_EN 0x400 +#define DMA_CTRL_DMAW_EN 0x800 + +/* CMB/SMB Control Register */ +#define REG_CSMB_CTRL 0x15D0 +#define CSMB_CTRL_CMB_NOW 1 +#define CSMB_CTRL_SMB_NOW 2 +#define CSMB_CTRL_CMB_EN 4 +#define CSMB_CTRL_SMB_EN 8 + +/* CMB DMA Write Threshold Register */ +#define REG_CMB_WRITE_TH 0x15D4 +#define CMB_RRD_TH_SHIFT 0 +#define CMB_RRD_TH_MASK 0x7FF +#define CMB_TPD_TH_SHIFT 16 +#define CMB_TPD_TH_MASK 0x7FF + +/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */ +#define REG_CMB_WRITE_TIMER 0x15D8 +#define CMB_RX_TM_SHIFT 0 +#define CMB_RX_TM_MASK 0xFFFF +#define CMB_TX_TM_SHIFT 16 +#define CMB_TX_TM_MASK 0xFFFF + +/* Number of packet received since last CMB write */ +#define REG_CMB_RX_PKT_CNT 0x15DC + +/* Number of packet transmitted since last CMB write */ +#define REG_CMB_TX_PKT_CNT 0x15E0 + +/* SMB auto DMA timer register */ +#define REG_SMB_TIMER 0x15E4 + +/* Mailbox Register */ +#define REG_MAILBOX 0x15F0 +#define MB_RFD_PROD_INDX_SHIFT 0 +#define MB_RFD_PROD_INDX_MASK 0x7FF +#define MB_RRD_CONS_INDX_SHIFT 11 +#define MB_RRD_CONS_INDX_MASK 0x7FF +#define MB_TPD_PROD_INDX_SHIFT 22 +#define MB_TPD_PROD_INDX_MASK 0x3FF + +/* Interrupt Status Register */ +#define ISR_SMB 0x1 +#define ISR_TIMER 0x2 +#define ISR_MANUAL 0x4 +#define ISR_RXF_OV 0x8 +#define ISR_RFD_UNRUN 0x10 +#define ISR_RRD_OV 0x20 +#define ISR_TXF_UNRUN 0x40 +#define ISR_LINK 0x80 +#define ISR_HOST_RFD_UNRUN 0x100 +#define ISR_HOST_RRD_OV 0x200 +#define ISR_DMAR_TO_RST 0x400 +#define ISR_DMAW_TO_RST 0x800 +#define ISR_GPHY 0x1000 +#define ISR_RX_PKT 0x10000 +#define ISR_TX_PKT 0x20000 +#define ISR_TX_DMA 0x40000 +#define ISR_RX_DMA 0x80000 +#define ISR_CMB_RX 0x100000 +#define ISR_CMB_TX 0x200000 +#define ISR_MAC_RX 0x400000 +#define ISR_MAC_TX 0x800000 +#define ISR_DIS_SMB 0x20000000 +#define ISR_DIS_DMA 0x40000000 + +/* Normal Interrupt mask */ +#define IMR_NORMAL_MASK (\ + ISR_SMB |\ + ISR_GPHY |\ + ISR_PHY_LINKDOWN|\ + ISR_DMAR_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_CMB_TX |\ + ISR_CMB_RX) + +/* Debug Interrupt Mask (enable all interrupt) */ +#define IMR_DEBUG_MASK (\ + ISR_SMB |\ + ISR_TIMER |\ + ISR_MANUAL |\ + ISR_RXF_OV |\ + ISR_RFD_UNRUN |\ + ISR_RRD_OV |\ + ISR_TXF_UNRUN |\ + ISR_LINK |\ + ISR_CMB_TX |\ + ISR_CMB_RX |\ + ISR_RX_PKT |\ + ISR_TX_PKT |\ + ISR_MAC_RX |\ + ISR_MAC_TX) + +#define MEDIA_TYPE_1000M_FULL 1 +#define MEDIA_TYPE_100M_FULL 2 +#define MEDIA_TYPE_100M_HALF 3 +#define MEDIA_TYPE_10M_FULL 4 +#define MEDIA_TYPE_10M_HALF 5 + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* All but 1000-Half */ + +#define MAX_JUMBO_FRAME_SIZE 10240 + +#define ATL1_EEDUMP_LEN 48 + +/* Statistics counters collected by the MAC */ +struct stats_msg_block { + /* rx */ + u32 rx_ok; /* good RX packets */ + u32 rx_bcast; /* good RX broadcast packets */ + u32 rx_mcast; /* good RX multicast packets */ + u32 rx_pause; /* RX pause frames */ + u32 rx_ctrl; /* RX control packets other than pause frames */ + u32 rx_fcs_err; /* RX packets with bad FCS */ + u32 rx_len_err; /* RX packets with length != actual size */ + u32 rx_byte_cnt; /* good bytes received. FCS is NOT included */ + u32 rx_runt; /* RX packets < 64 bytes with good FCS */ + u32 rx_frag; /* RX packets < 64 bytes with bad FCS */ + u32 rx_sz_64; /* 64 byte RX packets */ + u32 rx_sz_65_127; + u32 rx_sz_128_255; + u32 rx_sz_256_511; + u32 rx_sz_512_1023; + u32 rx_sz_1024_1518; + u32 rx_sz_1519_max; /* 1519 byte to MTU RX packets */ + u32 rx_sz_ov; /* truncated RX packets > MTU */ + u32 rx_rxf_ov; /* frames dropped due to RX FIFO overflow */ + u32 rx_rrd_ov; /* frames dropped due to RRD overflow */ + u32 rx_align_err; /* alignment errors */ + u32 rx_bcast_byte_cnt; /* RX broadcast bytes, excluding FCS */ + u32 rx_mcast_byte_cnt; /* RX multicast bytes, excluding FCS */ + u32 rx_err_addr; /* packets dropped due to address filtering */ + + /* tx */ + u32 tx_ok; /* good TX packets */ + u32 tx_bcast; /* good TX broadcast packets */ + u32 tx_mcast; /* good TX multicast packets */ + u32 tx_pause; /* TX pause frames */ + u32 tx_exc_defer; /* TX packets deferred excessively */ + u32 tx_ctrl; /* TX control frames, excluding pause frames */ + u32 tx_defer; /* TX packets deferred */ + u32 tx_byte_cnt; /* bytes transmitted, FCS is NOT included */ + u32 tx_sz_64; /* 64 byte TX packets */ + u32 tx_sz_65_127; + u32 tx_sz_128_255; + u32 tx_sz_256_511; + u32 tx_sz_512_1023; + u32 tx_sz_1024_1518; + u32 tx_sz_1519_max; /* 1519 byte to MTU TX packets */ + u32 tx_1_col; /* packets TX after a single collision */ + u32 tx_2_col; /* packets TX after multiple collisions */ + u32 tx_late_col; /* TX packets with late collisions */ + u32 tx_abort_col; /* TX packets aborted w/excessive collisions */ + u32 tx_underrun; /* TX packets aborted due to TX FIFO underrun + * or TRD FIFO underrun */ + u32 tx_rd_eop; /* reads beyond the EOP into the next frame + * when TRD was not written timely */ + u32 tx_len_err; /* TX packets where length != actual size */ + u32 tx_trunc; /* TX packets truncated due to size > MTU */ + u32 tx_bcast_byte; /* broadcast bytes transmitted, excluding FCS */ + u32 tx_mcast_byte; /* multicast bytes transmitted, excluding FCS */ + u32 smb_updated; /* 1: SMB Updated. This is used by software to + * indicate the statistics update. Software + * should clear this bit after retrieving the + * statistics information. */ +}; + +/* Coalescing Message Block */ +struct coals_msg_block { + u32 int_stats; /* interrupt status */ + u16 rrd_prod_idx; /* TRD Producer Index. */ + u16 rfd_cons_idx; /* RFD Consumer Index. */ + u16 update; /* Selene sets this bit every time it DMAs the + * CMB to host memory. Software should clear + * this bit when CMB info is processed. */ + u16 tpd_cons_idx; /* TPD Consumer Index. */ +}; + +/* RRD descriptor */ +struct rx_return_desc { + u8 num_buf; /* Number of RFD buffers used by the received packet */ + u8 resved; + u16 buf_indx; /* RFD Index of the first buffer */ + union { + u32 valid; + struct { + u16 rx_chksum; + u16 pkt_size; + } xsum_sz; + } xsz; + + u16 pkt_flg; /* Packet flags */ + u16 err_flg; /* Error flags */ + u16 resved2; + u16 vlan_tag; /* VLAN TAG */ +}; + +#define PACKET_FLAG_ETH_TYPE 0x0080 +#define PACKET_FLAG_VLAN_INS 0x0100 +#define PACKET_FLAG_ERR 0x0200 +#define PACKET_FLAG_IPV4 0x0400 +#define PACKET_FLAG_UDP 0x0800 +#define PACKET_FLAG_TCP 0x1000 +#define PACKET_FLAG_BCAST 0x2000 +#define PACKET_FLAG_MCAST 0x4000 +#define PACKET_FLAG_PAUSE 0x8000 + +#define ERR_FLAG_CRC 0x0001 +#define ERR_FLAG_CODE 0x0002 +#define ERR_FLAG_DRIBBLE 0x0004 +#define ERR_FLAG_RUNT 0x0008 +#define ERR_FLAG_OV 0x0010 +#define ERR_FLAG_TRUNC 0x0020 +#define ERR_FLAG_IP_CHKSUM 0x0040 +#define ERR_FLAG_L4_CHKSUM 0x0080 +#define ERR_FLAG_LEN 0x0100 +#define ERR_FLAG_DES_ADDR 0x0200 + +/* RFD descriptor */ +struct rx_free_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 buf_len; /* Size of the receive buffer in host memory */ + u16 coalese; /* Update consumer index to host after the + * reception of this frame */ + /* __attribute__ ((packed)) is required */ +} __attribute__ ((packed)); + +/* tsopu defines */ +#define TSO_PARAM_BUFLEN_MASK 0x3FFF +#define TSO_PARAM_BUFLEN_SHIFT 0 +#define TSO_PARAM_DMAINT_MASK 0x0001 +#define TSO_PARAM_DMAINT_SHIFT 14 +#define TSO_PARAM_PKTNT_MASK 0x0001 +#define TSO_PARAM_PKTINT_SHIFT 15 +#define TSO_PARAM_VLANTAG_MASK 0xFFFF +#define TSO_PARAM_VLAN_SHIFT 16 + +/* tsopl defines */ +#define TSO_PARAM_EOP_MASK 0x0001 +#define TSO_PARAM_EOP_SHIFT 0 +#define TSO_PARAM_COALESCE_MASK 0x0001 +#define TSO_PARAM_COALESCE_SHIFT 1 +#define TSO_PARAM_INSVLAG_MASK 0x0001 +#define TSO_PARAM_INSVLAG_SHIFT 2 +#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001 +#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3 +#define TSO_PARAM_SEGMENT_MASK 0x0001 +#define TSO_PARAM_SEGMENT_SHIFT 4 +#define TSO_PARAM_IPCKSUM_MASK 0x0001 +#define TSO_PARAM_IPCKSUM_SHIFT 5 +#define TSO_PARAM_TCPCKSUM_MASK 0x0001 +#define TSO_PARAM_TCPCKSUM_SHIFT 6 +#define TSO_PARAM_UDPCKSUM_MASK 0x0001 +#define TSO_PARAM_UDPCKSUM_SHIFT 7 +#define TSO_PARAM_VLANTAGGED_MASK 0x0001 +#define TSO_PARAM_VLANTAGGED_SHIFT 8 +#define TSO_PARAM_ETHTYPE_MASK 0x0001 +#define TSO_PARAM_ETHTYPE_SHIFT 9 +#define TSO_PARAM_IPHL_MASK 0x000F +#define TSO_PARAM_IPHL_SHIFT 10 +#define TSO_PARAM_TCPHDRLEN_MASK 0x000F +#define TSO_PARAM_TCPHDRLEN_SHIFT 14 +#define TSO_PARAM_HDRFLAG_MASK 0x0001 +#define TSO_PARAM_HDRFLAG_SHIFT 18 +#define TSO_PARAM_MSS_MASK 0x1FFF +#define TSO_PARAM_MSS_SHIFT 19 + +/* csumpu defines */ +#define CSUM_PARAM_BUFLEN_MASK 0x3FFF +#define CSUM_PARAM_BUFLEN_SHIFT 0 +#define CSUM_PARAM_DMAINT_MASK 0x0001 +#define CSUM_PARAM_DMAINT_SHIFT 14 +#define CSUM_PARAM_PKTINT_MASK 0x0001 +#define CSUM_PARAM_PKTINT_SHIFT 15 +#define CSUM_PARAM_VALANTAG_MASK 0xFFFF +#define CSUM_PARAM_VALAN_SHIFT 16 + +/* csumpl defines*/ +#define CSUM_PARAM_EOP_MASK 0x0001 +#define CSUM_PARAM_EOP_SHIFT 0 +#define CSUM_PARAM_COALESCE_MASK 0x0001 +#define CSUM_PARAM_COALESCE_SHIFT 1 +#define CSUM_PARAM_INSVLAG_MASK 0x0001 +#define CSUM_PARAM_INSVLAG_SHIFT 2 +#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001 +#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3 +#define CSUM_PARAM_SEGMENT_MASK 0x0001 +#define CSUM_PARAM_SEGMENT_SHIFT 4 +#define CSUM_PARAM_IPCKSUM_MASK 0x0001 +#define CSUM_PARAM_IPCKSUM_SHIFT 5 +#define CSUM_PARAM_TCPCKSUM_MASK 0x0001 +#define CSUM_PARAM_TCPCKSUM_SHIFT 6 +#define CSUM_PARAM_UDPCKSUM_MASK 0x0001 +#define CSUM_PARAM_UDPCKSUM_SHIFT 7 +#define CSUM_PARAM_VLANTAGGED_MASK 0x0001 +#define CSUM_PARAM_VLANTAGGED_SHIFT 8 +#define CSUM_PARAM_ETHTYPE_MASK 0x0001 +#define CSUM_PARAM_ETHTYPE_SHIFT 9 +#define CSUM_PARAM_IPHL_MASK 0x000F +#define CSUM_PARAM_IPHL_SHIFT 10 +#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF +#define CSUM_PARAM_PLOADOFFSET_SHIFT 16 +#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF +#define CSUM_PARAM_XSUMOFFSET_SHIFT 24 + +/* TPD descriptor */ +struct tso_param { + /* The order of these declarations is important -- don't change it */ + u32 tsopu; /* tso_param upper word */ + u32 tsopl; /* tso_param lower word */ +}; + +struct csum_param { + /* The order of these declarations is important -- don't change it */ + u32 csumpu; /* csum_param upper word */ + u32 csumpl; /* csum_param lower word */ +}; + +union tpd_descr { + u64 data; + struct csum_param csum; + struct tso_param tso; +}; + +struct tx_packet_desc { + __le64 buffer_addr; + union tpd_descr desc; +}; + +/* DMA Order Settings */ +enum atl1_dma_order { + atl1_dma_ord_in = 1, + atl1_dma_ord_enh = 2, + atl1_dma_ord_out = 4 +}; + +enum atl1_dma_rcb { + atl1_rcb_64 = 0, + atl1_rcb_128 = 1 +}; + +enum atl1_dma_req_block { + atl1_dma_req_128 = 0, + atl1_dma_req_256 = 1, + atl1_dma_req_512 = 2, + atl1_dma_req_1024 = 3, + atl1_dma_req_2048 = 4, + atl1_dma_req_4096 = 5 +}; #define ATL1_MAX_INTR 3 #define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */ @@ -58,19 +591,6 @@ struct atl1_adapter; #define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc) /* - * This detached comment is preserved for documentation purposes only. - * It was originally attached to some code that got deleted, but seems - * important enough to keep around... - * - * - * Some workarounds require millisecond delays and are run during interrupt - * context. Most notably, when establishing link, the phy may need tweaking - * but cannot process phy register reads/writes faster than millisecond - * intervals...and we establish link due to a "link status change" interrupt. - * - */ - -/* * atl1_ring_header represents a single, contiguous block of DMA space * mapped for the three descriptor rings (tpd, rfd, rrd) and the two * message blocks (cmb, smb) described below @@ -156,20 +676,15 @@ struct atl1_sft_stats { u64 tx_aborted_errors; u64 tx_window_errors; u64 tx_carrier_errors; - u64 tx_pause; /* num pause packets transmitted. */ - u64 excecol; /* num tx packets w/ excessive collisions. */ - u64 deffer; /* num tx packets deferred */ - u64 scc; /* num packets subsequently transmitted - * successfully w/ single prior collision. */ - u64 mcc; /* num packets subsequently transmitted - * successfully w/ multiple prior collisions. */ - u64 latecol; /* num tx packets w/ late collisions. */ - u64 tx_underun; /* num tx packets aborted due to transmit - * FIFO underrun, or TRD FIFO underrun */ - u64 tx_trunc; /* num tx packets truncated due to size - * exceeding MTU, regardless whether truncated - * by the chip or not. (The name doesn't really - * reflect the meaning in this case.) */ + u64 tx_pause; /* TX pause frames */ + u64 excecol; /* TX packets w/ excessive collisions */ + u64 deffer; /* TX packets deferred */ + u64 scc; /* packets TX after a single collision */ + u64 mcc; /* packets TX after multiple collisions */ + u64 latecol; /* TX packets w/ late collisions */ + u64 tx_underun; /* TX packets aborted due to TX FIFO underrun + * or TRD FIFO underrun */ + u64 tx_trunc; /* TX packets truncated due to size > MTU */ u64 rx_pause; /* num Pause packets received. */ u64 rx_rrd_ov; u64 rx_trunc; @@ -184,8 +699,7 @@ struct atl1_hw { enum atl1_dma_req_block dmar_block; enum atl1_dma_req_block dmaw_block; u8 preamble_len; - u8 max_retry; /* Retransmission maximum, after which the - * packet will be discarded */ + u8 max_retry; u8 jam_ipg; /* IPG to start JAM for collision based flow * control in half-duplex mode. In units of * 8-bit time */ @@ -271,16 +785,15 @@ struct atl1_adapter { u64 hw_csum_err; u64 hw_csum_good; - u16 imt; /* interrupt moderator timer (2us resolution */ - u16 ict; /* interrupt clear timer (2us resolution */ - struct mii_if_info mii; /* MII interface info */ + u16 imt; /* interrupt moderator timer (2us resolution) */ + u16 ict; /* interrupt clear timer (2us resolution */ + struct mii_if_info mii; /* MII interface info */ - /* structs defined in atl1_hw.h */ - u32 bd_number; /* board number */ + u32 bd_number; /* board number */ bool pci_using_64; struct atl1_hw hw; struct atl1_smb smb; struct atl1_cmb cmb; }; -#endif /* _ATL1_H_ */ +#endif /* ATL1_H */ diff --git a/drivers/net/atlx/atl1_ethtool.c b/drivers/net/atlx/atl1_ethtool.c deleted file mode 100644 index 68a83be..0000000 --- a/drivers/net/atlx/atl1_ethtool.c +++ /dev/null @@ -1,505 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include "atl1.h" - -struct atl1_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; -}; - -#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \ - offsetof(struct atl1_adapter, m) - -static struct atl1_stats atl1_gstrings_stats[] = { - {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, - {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, - {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, - {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, - {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, - {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, - {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, - {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, - {"multicast", ATL1_STAT(soft_stats.multicast)}, - {"collisions", ATL1_STAT(soft_stats.collisions)}, - {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, - {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, - {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, - {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, - {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, - {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, - {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, - {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, - {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, - {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, - {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, - {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, - {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, - {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, - {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, - {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, - {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, - {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, - {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} -}; - -static void atl1_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int i; - char *p; - - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; - data[i] = (atl1_gstrings_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; - } - -} - -static int atl1_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(atl1_gstrings_stats); - default: - return -EOPNOTSUPP; - } -} - -static int atl1_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | SUPPORTED_TP); - ecmd->advertising = ADVERTISED_TP; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - ecmd->advertising |= ADVERTISED_Autoneg; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { - ecmd->advertising |= ADVERTISED_Autoneg; - ecmd->advertising |= - (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full); - } - else - ecmd->advertising |= (ADVERTISED_1000baseT_Full); - } - ecmd->port = PORT_TP; - ecmd->phy_address = 0; - ecmd->transceiver = XCVR_INTERNAL; - - if (netif_carrier_ok(adapter->netdev)) { - u16 link_speed, link_duplex; - atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); - ecmd->speed = link_speed; - if (link_duplex == FULL_DUPLEX) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - } else { - ecmd->speed = -1; - ecmd->duplex = -1; - } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - ecmd->autoneg = AUTONEG_ENABLE; - else - ecmd->autoneg = AUTONEG_DISABLE; - - return 0; -} - -static int atl1_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u16 phy_data; - int ret_val = 0; - u16 old_media_type = hw->media_type; - - if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); - atl1_down(adapter); - } - - if (ecmd->autoneg == AUTONEG_ENABLE) - hw->media_type = MEDIA_TYPE_AUTO_SENSOR; - else { - if (ecmd->speed == SPEED_1000) { - if (ecmd->duplex != DUPLEX_FULL) { - dev_warn(&adapter->pdev->dev, - "can't force to 1000M half duplex\n"); - ret_val = -EINVAL; - goto exit_sset; - } - hw->media_type = MEDIA_TYPE_1000M_FULL; - } else if (ecmd->speed == SPEED_100) { - if (ecmd->duplex == DUPLEX_FULL) { - hw->media_type = MEDIA_TYPE_100M_FULL; - } else - hw->media_type = MEDIA_TYPE_100M_HALF; - } else { - if (ecmd->duplex == DUPLEX_FULL) - hw->media_type = MEDIA_TYPE_10M_FULL; - else - hw->media_type = MEDIA_TYPE_10M_HALF; - } - } - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - ecmd->advertising = - ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - case MEDIA_TYPE_1000M_FULL: - ecmd->advertising = - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - default: - ecmd->advertising = 0; - break; - } - if (atl1_phy_setup_autoneg_adv(hw)) { - ret_val = -EINVAL; - dev_warn(&adapter->pdev->dev, - "invalid ethtool speed/duplex setting\n"); - goto exit_sset; - } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); -exit_sset: - if (ret_val) - hw->media_type = old_media_type; - - if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); - atl1_up(adapter); - } else if (!ret_val) { - dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); - atl1_reset(adapter); - } - return ret_val; -} - -static void atl1_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - strncpy(drvinfo->driver, atl1_driver_name, sizeof(drvinfo->driver)); - strncpy(drvinfo->version, atl1_driver_version, - sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); - drvinfo->eedump_len = ATL1_EEDUMP_LEN; -} - -static void atl1_get_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; - if (adapter->wol & ATL1_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATL1_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATL1_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & ATL1_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; - return; -} - -static int atl1_set_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATL1_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATL1_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATL1_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= ATL1_WUFC_MAG; - return 0; -} - -static void atl1_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *txdr = &adapter->tpd_ring; - struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; - - ring->rx_max_pending = ATL1_MAX_RFD; - ring->tx_max_pending = ATL1_MAX_TPD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = rxdr->count; - ring->tx_pending = txdr->count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} - -static int atl1_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; - struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; - struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; - - struct atl1_tpd_ring tpd_old, tpd_new; - struct atl1_rfd_ring rfd_old, rfd_new; - struct atl1_rrd_ring rrd_old, rrd_new; - struct atl1_ring_header rhdr_old, rhdr_new; - int err; - - tpd_old = adapter->tpd_ring; - rfd_old = adapter->rfd_ring; - rrd_old = adapter->rrd_ring; - rhdr_old = adapter->ring_header; - - if (netif_running(adapter->netdev)) - atl1_down(adapter); - - rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); - rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : - rfdr->count; - rfdr->count = (rfdr->count + 3) & ~3; - rrdr->count = rfdr->count; - - tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); - tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : - tpdr->count; - tpdr->count = (tpdr->count + 3) & ~3; - - if (netif_running(adapter->netdev)) { - /* try to get new resources before deleting old */ - err = atl1_setup_ring_resources(adapter); - if (err) - goto err_setup_ring; - - /* - * save the new, restore the old in order to free it, - * then restore the new back again - */ - - rfd_new = adapter->rfd_ring; - rrd_new = adapter->rrd_ring; - tpd_new = adapter->tpd_ring; - rhdr_new = adapter->ring_header; - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; - atl1_free_ring_resources(adapter); - adapter->rfd_ring = rfd_new; - adapter->rrd_ring = rrd_new; - adapter->tpd_ring = tpd_new; - adapter->ring_header = rhdr_new; - - err = atl1_up(adapter); - if (err) - return err; - } - return 0; - -err_setup_ring: - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; - atl1_up(adapter); - return err; -} - -static void atl1_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; - } - epause->rx_pause = 1; - epause->tx_pause = 1; -} - -static int atl1_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; - } - - epause->rx_pause = 1; - epause->tx_pause = 1; - - return 0; -} - -static u32 atl1_get_rx_csum(struct net_device *netdev) -{ - return 1; -} - -static void atl1_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) -{ - u8 *p = data; - int i; - - switch (stringset) { - case ETH_SS_STATS: - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - memcpy(p, atl1_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - break; - } -} - -static int atl1_nway_reset(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - - if (netif_running(netdev)) { - u16 phy_data; - atl1_down(adapter); - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - } else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - atl1_up(adapter); - } - return 0; -} - -const struct ethtool_ops atl1_ethtool_ops = { - .get_settings = atl1_get_settings, - .set_settings = atl1_set_settings, - .get_drvinfo = atl1_get_drvinfo, - .get_wol = atl1_get_wol, - .set_wol = atl1_set_wol, - .get_ringparam = atl1_get_ringparam, - .set_ringparam = atl1_set_ringparam, - .get_pauseparam = atl1_get_pauseparam, - .set_pauseparam = atl1_set_pauseparam, - .get_rx_csum = atl1_get_rx_csum, - .set_tx_csum = ethtool_op_set_tx_hw_csum, - .get_link = ethtool_op_get_link, - .set_sg = ethtool_op_set_sg, - .get_strings = atl1_get_strings, - .nway_reset = atl1_nway_reset, - .get_ethtool_stats = atl1_get_ethtool_stats, - .get_sset_count = atl1_get_sset_count, - .set_tso = ethtool_op_set_tso, -}; diff --git a/drivers/net/atlx/atl1_hw.c b/drivers/net/atlx/atl1_hw.c deleted file mode 100644 index 9d3bd22..0000000 --- a/drivers/net/atlx/atl1_hw.c +++ /dev/null @@ -1,720 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "atl1.h" - -/* - * Reset the transmit and receive units; mask and clear all interrupts. - * hw - Struct containing variables accessed by shared code - * return : ATL1_SUCCESS or idle status (if error) - */ -s32 atl1_reset_hw(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - u32 icr; - int i; - - /* - * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events - */ - /* - * iowrite32(0, hw->hw_addr + REG_IMR); - * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); - */ - - /* - * Issue Soft Reset to the MAC. This will reset the chip's - * transmit, receive, DMA. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); - ioread32(hw->hw_addr + REG_MASTER_CTRL); - - iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE); - ioread16(hw->hw_addr + REG_GPHY_ENABLE); - - msleep(1); /* delay about 1ms */ - - /* Wait at least 10ms for All module to be Idle */ - for (i = 0; i < 10; i++) { - icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); - if (!icr) - break; - msleep(1); /* delay 1 ms */ - cpu_relax(); /* FIXME: is this still the right way to do this? */ - } - - if (icr) { - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); - return icr; - } - - return ATL1_SUCCESS; -} - -/* function about EEPROM - * - * check_eeprom_exist - * return 0 if eeprom exist - */ -static int atl1_check_eeprom_exist(struct atl1_hw *hw) -{ - u32 value; - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (value & SPI_FLASH_CTRL_EN_VPD) { - value &= ~SPI_FLASH_CTRL_EN_VPD; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - } - - value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); - return ((value & 0xFF00) == 0x6C00) ? 0 : 1; -} - -static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) -{ - int i; - u32 control; - - if (offset & 3) - return false; /* address do not align */ - - iowrite32(0, hw->hw_addr + REG_VPD_DATA); - control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; - iowrite32(control, hw->hw_addr + REG_VPD_CAP); - ioread32(hw->hw_addr + REG_VPD_CAP); - - for (i = 0; i < 10; i++) { - msleep(2); - control = ioread32(hw->hw_addr + REG_VPD_CAP); - if (control & VPD_CAP_VPD_FLAG) - break; - } - if (control & VPD_CAP_VPD_FLAG) { - *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); - return true; - } - return false; /* timeout */ -} - -/* - * Reads the value from a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to read - */ -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) -{ - u32 val; - int i; - - val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - if (!(val & (MDIO_START | MDIO_BUSY))) { - *phy_data = (u16) val; - return ATL1_SUCCESS; - } - return ATL1_ERR_PHY; -} - -#define CUSTOM_SPI_CS_SETUP 2 -#define CUSTOM_SPI_CLK_HI 2 -#define CUSTOM_SPI_CLK_LO 2 -#define CUSTOM_SPI_CS_HOLD 2 -#define CUSTOM_SPI_CS_HI 3 - -static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) -{ - int i; - u32 value; - - iowrite32(0, hw->hw_addr + REG_SPI_DATA); - iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); - - value = SPI_FLASH_CTRL_WAIT_READY | - (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << - SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & - SPI_FLASH_CTRL_CLK_HI_MASK) << - SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & - SPI_FLASH_CTRL_CLK_LO_MASK) << - SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & - SPI_FLASH_CTRL_CS_HOLD_MASK) << - SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & - SPI_FLASH_CTRL_CS_HI_MASK) << - SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << - SPI_FLASH_CTRL_INS_SHIFT; - - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - - value |= SPI_FLASH_CTRL_START; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - - for (i = 0; i < 10; i++) { - msleep(1); /* 1ms */ - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (!(value & SPI_FLASH_CTRL_START)) - break; - } - - if (value & SPI_FLASH_CTRL_START) - return false; - - *buf = ioread32(hw->hw_addr + REG_SPI_DATA); - - return true; -} - -/* - * get_permanent_address - * return 0 if get valid mac address, - */ -static int atl1_get_permanent_address(struct atl1_hw *hw) -{ - u32 addr[2]; - u32 i, control; - u16 reg; - u8 eth_addr[ETH_ALEN]; - bool key_valid; - - if (is_valid_ether_addr(hw->perm_mac_addr)) - return 0; - - /* init */ - addr[0] = addr[1] = 0; - - if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */ - reg = 0; - key_valid = false; - /* Read out all EEPROM content */ - i = 0; - while (1) { - if (atl1_read_eeprom(hw, i + 0x100, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* assume data end while encount an invalid KEYWORD */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - return 1; - } - - /* see if SPI FLAGS exist ? */ - addr[0] = addr[1] = 0; - reg = 0; - key_valid = false; - i = 0; - while (1) { - if (atl1_spi_read(hw, i + 0x1f000, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* data end */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - /* - * On some motherboards, the MAC address is written by the - * BIOS directly to the MAC register during POST, and is - * not stored in eeprom. If all else thus far has failed - * to fetch the permanent MAC address, try reading it directly. - */ - addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); - addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - return 1; -} - -/* - * Reads the adapter's MAC address from the EEPROM - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_read_mac_addr(struct atl1_hw *hw) -{ - u16 i; - - if (atl1_get_permanent_address(hw)) - random_ether_addr(hw->perm_mac_addr); - - for (i = 0; i < ETH_ALEN; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return ATL1_SUCCESS; -} - -/* - * Hashes an address to determine its location in the multicast table - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * atl1_hash_mc_addr - * purpose - * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB - */ -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) -{ - u32 crc32, value = 0; - int i; - - crc32 = ether_crc_le(6, mc_addr); - for (i = 0; i < 32; i++) - value |= (((crc32 >> i) & 1) << (31 - i)); - - return value; -} - -/* - * Sets the bit in the multicast table corresponding to the hash value. - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - */ -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) -{ - u32 hash_bit, hash_reg; - u32 mta; - - /* - * The HASH Table is a register array of 2 32-bit registers. - * It is treated like an array of 64 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 31) & 0x1; - hash_bit = (hash_value >> 26) & 0x1F; - mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); - mta |= (1 << hash_bit); - iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); -} - -/* - * Writes a value to a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to write - * data - data to write to the PHY - */ -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) -{ - int i; - u32 val; - - val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | - (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | - MDIO_SUP_PREAMBLE | - MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if (!(val & (MDIO_START | MDIO_BUSY))) - return ATL1_SUCCESS; - - return ATL1_ERR_PHY; -} - -/* - * Make L001's PHY out of Power Saving State (bug) - * hw - Struct containing variables accessed by shared code - * when power on, L001's PHY always on Power saving State - * (Gigabit Link forbidden) - */ -static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) -{ - s32 ret; - ret = atl1_write_phy_reg(hw, 29, 0x0029); - if (ret) - return ret; - return atl1_write_phy_reg(hw, 30, 0); -} - -/* - *TODO: do something or get rid of this - */ -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ -/* s32 ret_val; - * u16 phy_data; - */ - -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ - return ATL1_SUCCESS; -} - -/* - * Resets the PHY and make all config validate - * hw - Struct containing variables accessed by shared code - * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) - */ -static s32 atl1_phy_reset(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - - ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); - if (ret_val) { - u32 val; - int i; - /* pcie serdes link may be down! */ - dev_dbg(&pdev->dev, "pcie phy link down\n"); - - for (i = 0; i < 25; i++) { - msleep(1); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); - return ret_val; - } - } - return ATL1_SUCCESS; -} - -/* - * Configures PHY autoneg and flow control advertisement settings - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) -{ - s32 ret_val; - s16 mii_autoneg_adv_reg; - s16 mii_1000t_ctrl_reg; - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; - - /* Read the MII 1000Base-T Control Register (Address 9). */ - mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK; - - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; - mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; - - /* - * Need to parse media_type and set up - * the appropriate PHY registers. - */ - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_1000M_FULL: - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; - break; - - case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; - break; - - case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; - break; - - default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; - break; - } - - /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); - - hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; - hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; - - ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - - return ATL1_SUCCESS; -} - -/* - * Configures link settings. - * hw - Struct containing variables accessed by shared code - * Assumes the hardware has previously been reset and the - * transmitter and receiver are not enabled. - */ -static s32 atl1_setup_link(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - - /* - * Options: - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * no matter what autoneg is , We will not wait link result. - */ - ret_val = atl1_phy_setup_autoneg_adv(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); - return ret_val; - } - /* SW.Reset , En-Auto-Neg if needed */ - ret_val = atl1_phy_reset(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error resetting phy\n"); - return ret_val; - } - hw->phy_configured = true; - return ret_val; -} - -static struct atl1_spi_flash_dev flash_table[] = { -/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ - {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, - {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, - {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, -}; - -static void atl1_init_flash_opcode(struct atl1_hw *hw) -{ - if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) - hw->flash_vendor = 0; /* ATMEL */ - - /* Init OP table */ - iowrite8(flash_table[hw->flash_vendor].cmd_program, - hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); - iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, - hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, - hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_rdid, - hw->hw_addr + REG_SPI_FLASH_OP_RDID); - iowrite8(flash_table[hw->flash_vendor].cmd_wren, - hw->hw_addr + REG_SPI_FLASH_OP_WREN); - iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, - hw->hw_addr + REG_SPI_FLASH_OP_RDSR); - iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, - hw->hw_addr + REG_SPI_FLASH_OP_WRSR); - iowrite8(flash_table[hw->flash_vendor].cmd_read, - hw->hw_addr + REG_SPI_FLASH_OP_READ); -} - -/* - * Performs basic configuration of the adapter. - * hw - Struct containing variables accessed by shared code - * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, - * and Calls routines to setup link - * Leaves the transmit and receive units disabled and uninitialized. - */ -s32 atl1_init_hw(struct atl1_hw *hw) -{ - u32 ret_val = 0; - - /* Zero out the Multicast HASH table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - /* clear the old settings from the multicast hash table */ - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - atl1_init_flash_opcode(hw); - - if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ - ret_val = atl1_write_phy_reg(hw, 18, 0xC00); - if (ret_val) - return ret_val; - /* make PHY out of power-saving state */ - ret_val = atl1_phy_leave_power_saving(hw); - if (ret_val) - return ret_val; - /* Call a subroutine to configure the link */ - ret_val = atl1_setup_link(hw); - } - return ret_val; -} - -/* - * Detects the current speed and duplex settings of the hardware. - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - */ -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - /* ; --- Read PHY Specific Status Register (17) */ - ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED)) - return ATL1_ERR_PHY_RES; - - switch (phy_data & MII_AT001_PSSR_SPEED) { - case MII_AT001_PSSR_1000MBS: - *speed = SPEED_1000; - break; - case MII_AT001_PSSR_100MBS: - *speed = SPEED_100; - break; - case MII_AT001_PSSR_10MBS: - *speed = SPEED_10; - break; - default: - dev_dbg(&pdev->dev, "error getting speed\n"); - return ATL1_ERR_PHY_SPEED; - break; - } - if (phy_data & MII_AT001_PSSR_DPLX) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - return ATL1_SUCCESS; -} - -void atl1_set_mac_addr(struct atl1_hw *hw) -{ - u32 value; - /* - * 00-0B-6A-F6-00-DC - * 0: 6AF600DC 1: 000B - * low dword - */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - /* high dword */ - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); -} diff --git a/drivers/net/atlx/atl1_hw.h b/drivers/net/atlx/atl1_hw.h deleted file mode 100644 index 939aa0f..0000000 --- a/drivers/net/atlx/atl1_hw.h +++ /dev/null @@ -1,946 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * There are a lot of defines in here that are unused and/or have cryptic - * names. Please leave them alone, as they're the closest thing we have - * to a spec from Attansic at present. *ahem* -- CHS - */ - -#ifndef _ATL1_HW_H_ -#define _ATL1_HW_H_ - -#include -#include - -struct atl1_adapter; -struct atl1_hw; - -/* function prototypes needed by multiple files */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_read_mac_addr(struct atl1_hw *hw); -s32 atl1_init_hw(struct atl1_hw *hw); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); -void atl1_set_mac_addr(struct atl1_hw *hw); -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); -s32 atl1_reset_hw(struct atl1_hw *hw); -void atl1_check_options(struct atl1_adapter *adapter); - -/* register definitions */ -#define REG_PCIE_CAP_LIST 0x58 - -#define REG_VPD_CAP 0x6C -#define VPD_CAP_ID_MASK 0xff -#define VPD_CAP_ID_SHIFT 0 -#define VPD_CAP_NEXT_PTR_MASK 0xFF -#define VPD_CAP_NEXT_PTR_SHIFT 8 -#define VPD_CAP_VPD_ADDR_MASK 0x7FFF -#define VPD_CAP_VPD_ADDR_SHIFT 16 -#define VPD_CAP_VPD_FLAG 0x80000000 - -#define REG_VPD_DATA 0x70 - -#define REG_SPI_FLASH_CTRL 0x200 -#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 -#define SPI_FLASH_CTRL_STS_WEN 0x2 -#define SPI_FLASH_CTRL_STS_WPEN 0x80 -#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF -#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 -#define SPI_FLASH_CTRL_INS_MASK 0x7 -#define SPI_FLASH_CTRL_INS_SHIFT 8 -#define SPI_FLASH_CTRL_START 0x800 -#define SPI_FLASH_CTRL_EN_VPD 0x2000 -#define SPI_FLASH_CTRL_LDSTART 0x8000 -#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 -#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 -#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 -#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 -#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 -#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 -#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 -#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 -#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 -#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 -#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 -#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 -#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 - -#define REG_SPI_ADDR 0x204 - -#define REG_SPI_DATA 0x208 - -#define REG_SPI_FLASH_CONFIG 0x20C -#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF -#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 -#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 -#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 -#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 - -#define REG_SPI_FLASH_OP_PROGRAM 0x210 -#define REG_SPI_FLASH_OP_SC_ERASE 0x211 -#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 -#define REG_SPI_FLASH_OP_RDID 0x213 -#define REG_SPI_FLASH_OP_WREN 0x214 -#define REG_SPI_FLASH_OP_RDSR 0x215 -#define REG_SPI_FLASH_OP_WRSR 0x216 -#define REG_SPI_FLASH_OP_READ 0x217 - -#define REG_TWSI_CTRL 0x218 -#define TWSI_CTRL_LD_OFFSET_MASK 0xFF -#define TWSI_CTRL_LD_OFFSET_SHIFT 0 -#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 -#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 -#define TWSI_CTRL_SW_LDSTART 0x800 -#define TWSI_CTRL_HW_LDSTART 0x1000 -#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F -#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 -#define TWSI_CTRL_LD_EXIST 0x400000 -#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 -#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 -#define TWSI_CTRL_FREQ_SEL_100K 0 -#define TWSI_CTRL_FREQ_SEL_200K 1 -#define TWSI_CTRL_FREQ_SEL_300K 2 -#define TWSI_CTRL_FREQ_SEL_400K 3 -#define TWSI_CTRL_SMB_SLV_ADDR -#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 -#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 - -#define REG_PCIE_DEV_MISC_CTRL 0x21C -#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 -#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 -#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 -#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 -#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 - -/* Selene Master Control Register */ -#define REG_MASTER_CTRL 0x1400 -#define MASTER_CTRL_SOFT_RST 0x1 -#define MASTER_CTRL_MTIMER_EN 0x2 -#define MASTER_CTRL_ITIMER_EN 0x4 -#define MASTER_CTRL_MANUAL_INT 0x8 -#define MASTER_CTRL_REV_NUM_SHIFT 16 -#define MASTER_CTRL_REV_NUM_MASK 0xff -#define MASTER_CTRL_DEV_ID_SHIFT 24 -#define MASTER_CTRL_DEV_ID_MASK 0xff - -/* Timer Initial Value Register */ -#define REG_MANUAL_TIMER_INIT 0x1404 - -/* IRQ ModeratorTimer Initial Value Register */ -#define REG_IRQ_MODU_TIMER_INIT 0x1408 - -#define REG_GPHY_ENABLE 0x140C - -/* IRQ Anti-Lost Timer Initial Value Register */ -#define REG_CMBDISDMA_TIMER 0x140E - -/* Block IDLE Status Register */ -#define REG_IDLE_STATUS 0x1410 -#define IDLE_STATUS_RXMAC 1 -#define IDLE_STATUS_TXMAC 2 -#define IDLE_STATUS_RXQ 4 -#define IDLE_STATUS_TXQ 8 -#define IDLE_STATUS_DMAR 0x10 -#define IDLE_STATUS_DMAW 0x20 -#define IDLE_STATUS_SMB 0x40 -#define IDLE_STATUS_CMB 0x80 - -/* MDIO Control Register */ -#define REG_MDIO_CTRL 0x1414 -#define MDIO_DATA_MASK 0xffff -#define MDIO_DATA_SHIFT 0 -#define MDIO_REG_ADDR_MASK 0x1f -#define MDIO_REG_ADDR_SHIFT 16 -#define MDIO_RW 0x200000 -#define MDIO_SUP_PREAMBLE 0x400000 -#define MDIO_START 0x800000 -#define MDIO_CLK_SEL_SHIFT 24 -#define MDIO_CLK_25_4 0 -#define MDIO_CLK_25_6 2 -#define MDIO_CLK_25_8 3 -#define MDIO_CLK_25_10 4 -#define MDIO_CLK_25_14 5 -#define MDIO_CLK_25_20 6 -#define MDIO_CLK_25_28 7 -#define MDIO_BUSY 0x8000000 -#define MDIO_WAIT_TIMES 30 - -/* MII PHY Status Register */ -#define REG_PHY_STATUS 0x1418 - -/* BIST Control and Status Register0 (for the Packet Memory) */ -#define REG_BIST0_CTRL 0x141c -#define BIST0_NOW 0x1 -#define BIST0_SRAM_FAIL 0x2 -#define BIST0_FUSE_FLAG 0x4 -#define REG_BIST1_CTRL 0x1420 -#define BIST1_NOW 0x1 -#define BIST1_SRAM_FAIL 0x2 -#define BIST1_FUSE_FLAG 0x4 - -/* MAC Control Register */ -#define REG_MAC_CTRL 0x1480 -#define MAC_CTRL_TX_EN 1 -#define MAC_CTRL_RX_EN 2 -#define MAC_CTRL_TX_FLOW 4 -#define MAC_CTRL_RX_FLOW 8 -#define MAC_CTRL_LOOPBACK 0x10 -#define MAC_CTRL_DUPLX 0x20 -#define MAC_CTRL_ADD_CRC 0x40 -#define MAC_CTRL_PAD 0x80 -#define MAC_CTRL_LENCHK 0x100 -#define MAC_CTRL_HUGE_EN 0x200 -#define MAC_CTRL_PRMLEN_SHIFT 10 -#define MAC_CTRL_PRMLEN_MASK 0xf -#define MAC_CTRL_RMV_VLAN 0x4000 -#define MAC_CTRL_PROMIS_EN 0x8000 -#define MAC_CTRL_TX_PAUSE 0x10000 -#define MAC_CTRL_SCNT 0x20000 -#define MAC_CTRL_SRST_TX 0x40000 -#define MAC_CTRL_TX_SIMURST 0x80000 -#define MAC_CTRL_SPEED_SHIFT 20 -#define MAC_CTRL_SPEED_MASK 0x300000 -#define MAC_CTRL_SPEED_1000 2 -#define MAC_CTRL_SPEED_10_100 1 -#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 -#define MAC_CTRL_TX_HUGE 0x800000 -#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 -#define MAC_CTRL_MC_ALL_EN 0x2000000 -#define MAC_CTRL_BC_EN 0x4000000 -#define MAC_CTRL_DBG 0x8000000 - -/* MAC IPG/IFG Control Register */ -#define REG_MAC_IPG_IFG 0x1484 -#define MAC_IPG_IFG_IPGT_SHIFT 0 -#define MAC_IPG_IFG_IPGT_MASK 0x7f -#define MAC_IPG_IFG_MIFG_SHIFT 8 -#define MAC_IPG_IFG_MIFG_MASK 0xff -#define MAC_IPG_IFG_IPGR1_SHIFT 16 -#define MAC_IPG_IFG_IPGR1_MASK 0x7f -#define MAC_IPG_IFG_IPGR2_SHIFT 24 -#define MAC_IPG_IFG_IPGR2_MASK 0x7f - -/* MAC STATION ADDRESS */ -#define REG_MAC_STA_ADDR 0x1488 - -/* Hash table for multicast address */ -#define REG_RX_HASH_TABLE 0x1490 - -/* MAC Half-Duplex Control Register */ -#define REG_MAC_HALF_DUPLX_CTRL 0x1498 -#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 -#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff -#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 -#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf -#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 -#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 -#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 -#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 -#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 -#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf -#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 -#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf - -/* Maximum Frame Length Control Register */ -#define REG_MTU 0x149c - -/* Wake-On-Lan control register */ -#define REG_WOL_CTRL 0x14a0 -#define WOL_PATTERN_EN 0x00000001 -#define WOL_PATTERN_PME_EN 0x00000002 -#define WOL_MAGIC_EN 0x00000004 -#define WOL_MAGIC_PME_EN 0x00000008 -#define WOL_LINK_CHG_EN 0x00000010 -#define WOL_LINK_CHG_PME_EN 0x00000020 -#define WOL_PATTERN_ST 0x00000100 -#define WOL_MAGIC_ST 0x00000200 -#define WOL_LINKCHG_ST 0x00000400 -#define WOL_CLK_SWITCH_EN 0x00008000 -#define WOL_PT0_EN 0x00010000 -#define WOL_PT1_EN 0x00020000 -#define WOL_PT2_EN 0x00040000 -#define WOL_PT3_EN 0x00080000 -#define WOL_PT4_EN 0x00100000 -#define WOL_PT5_EN 0x00200000 -#define WOL_PT6_EN 0x00400000 - -/* WOL Length ( 2 DWORD ) */ -#define REG_WOL_PATTERN_LEN 0x14a4 -#define WOL_PT_LEN_MASK 0x7f -#define WOL_PT0_LEN_SHIFT 0 -#define WOL_PT1_LEN_SHIFT 8 -#define WOL_PT2_LEN_SHIFT 16 -#define WOL_PT3_LEN_SHIFT 24 -#define WOL_PT4_LEN_SHIFT 0 -#define WOL_PT5_LEN_SHIFT 8 -#define WOL_PT6_LEN_SHIFT 16 - -/* Internal SRAM Partition Register */ -#define REG_SRAM_RFD_ADDR 0x1500 -#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4) -#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8) -#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12) -#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16) -#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20) -#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24) -#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28) -#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32) -#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36) -#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40) -#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44) -#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48) -#define SRAM_TCPH_ADDR_MASK 0x0fff -#define SRAM_TCPH_ADDR_SHIFT 0 -#define SRAM_PATH_ADDR_MASK 0x0fff -#define SRAM_PATH_ADDR_SHIFT 16 - -/* Load Ptr Register */ -#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52) - -/* Descriptor Control register */ -#define REG_DESC_BASE_ADDR_HI 0x1540 -#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4) -#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8) -#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12) -#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16) -#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20) -#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24) -#define DESC_RFD_RING_SIZE_MASK 0x7ff -#define DESC_RFD_RING_SIZE_SHIFT 0 -#define DESC_RRD_RING_SIZE_MASK 0x7ff -#define DESC_RRD_RING_SIZE_SHIFT 16 -#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28) -#define DESC_TPD_RING_SIZE_MASK 0x3ff -#define DESC_TPD_RING_SIZE_SHIFT 0 - -/* TXQ Control Register */ -#define REG_TXQ_CTRL 0x1580 -#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 -#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f -#define TXQ_CTRL_EN 0x20 -#define TXQ_CTRL_ENH_MODE 0x40 -#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 -#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f -#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 -#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff - -/* Jumbo packet Threshold for task offload */ -#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 -#define TX_JUMBO_TASK_TH_MASK 0x7ff -#define TX_JUMBO_TASK_TH_SHIFT 0 -#define TX_TPD_MIN_IPG_MASK 0x1f -#define TX_TPD_MIN_IPG_SHIFT 16 - -/* RXQ Control Register */ -#define REG_RXQ_CTRL 0x15a0 -#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 -#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff -#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 -#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff -#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 -#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f -#define RXQ_CTRL_CUT_THRU_EN 0x40000000 -#define RXQ_CTRL_EN 0x80000000 - -/* Rx jumbo packet threshold and rrd retirement timer */ -#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4) -#define RXQ_JMBOSZ_TH_MASK 0x7ff -#define RXQ_JMBOSZ_TH_SHIFT 0 -#define RXQ_JMBO_LKAH_MASK 0xf -#define RXQ_JMBO_LKAH_SHIFT 11 -#define RXQ_RRD_TIMER_MASK 0xffff -#define RXQ_RRD_TIMER_SHIFT 16 - -/* RFD flow control register */ -#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8) -#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 -#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff -#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 -#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff - -/* RRD flow control register */ -#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12) -#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 -#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff -#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 -#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff - -/* DMA Engine Control Register */ -#define REG_DMA_CTRL 0x15c0 -#define DMA_CTRL_DMAR_IN_ORDER 0x1 -#define DMA_CTRL_DMAR_ENH_ORDER 0x2 -#define DMA_CTRL_DMAR_OUT_ORDER 0x4 -#define DMA_CTRL_RCB_VALUE 0x8 -#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 -#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 -#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 -#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 -#define DMA_CTRL_DMAR_EN 0x400 -#define DMA_CTRL_DMAW_EN 0x800 - -/* CMB/SMB Control Register */ -#define REG_CSMB_CTRL 0x15d0 -#define CSMB_CTRL_CMB_NOW 1 -#define CSMB_CTRL_SMB_NOW 2 -#define CSMB_CTRL_CMB_EN 4 -#define CSMB_CTRL_SMB_EN 8 - -/* CMB DMA Write Threshold Register */ -#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4) -#define CMB_RRD_TH_SHIFT 0 -#define CMB_RRD_TH_MASK 0x7ff -#define CMB_TPD_TH_SHIFT 16 -#define CMB_TPD_TH_MASK 0x7ff - -/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */ -#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8) -#define CMB_RX_TM_SHIFT 0 -#define CMB_RX_TM_MASK 0xffff -#define CMB_TX_TM_SHIFT 16 -#define CMB_TX_TM_MASK 0xffff - -/* Number of packet received since last CMB write */ -#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12) - -/* Number of packet transmitted since last CMB write */ -#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16) - -/* SMB auto DMA timer register */ -#define REG_SMB_TIMER (REG_CSMB_CTRL+20) - -/* Mailbox Register */ -#define REG_MAILBOX 0x15f0 -#define MB_RFD_PROD_INDX_SHIFT 0 -#define MB_RFD_PROD_INDX_MASK 0x7ff -#define MB_RRD_CONS_INDX_SHIFT 11 -#define MB_RRD_CONS_INDX_MASK 0x7ff -#define MB_TPD_PROD_INDX_SHIFT 22 -#define MB_TPD_PROD_INDX_MASK 0x3ff - -/* Interrupt Status Register */ -#define REG_ISR 0x1600 -#define ISR_SMB 1 -#define ISR_TIMER 2 -#define ISR_MANUAL 4 -#define ISR_RXF_OV 8 -#define ISR_RFD_UNRUN 0x10 -#define ISR_RRD_OV 0x20 -#define ISR_TXF_UNRUN 0x40 -#define ISR_LINK 0x80 -#define ISR_HOST_RFD_UNRUN 0x100 -#define ISR_HOST_RRD_OV 0x200 -#define ISR_DMAR_TO_RST 0x400 -#define ISR_DMAW_TO_RST 0x800 -#define ISR_GPHY 0x1000 -#define ISR_RX_PKT 0x10000 -#define ISR_TX_PKT 0x20000 -#define ISR_TX_DMA 0x40000 -#define ISR_RX_DMA 0x80000 -#define ISR_CMB_RX 0x100000 -#define ISR_CMB_TX 0x200000 -#define ISR_MAC_RX 0x400000 -#define ISR_MAC_TX 0x800000 -#define ISR_UR_DETECTED 0x1000000 -#define ISR_FERR_DETECTED 0x2000000 -#define ISR_NFERR_DETECTED 0x4000000 -#define ISR_CERR_DETECTED 0x8000000 -#define ISR_PHY_LINKDOWN 0x10000000 -#define ISR_DIS_SMB 0x20000000 -#define ISR_DIS_DMA 0x40000000 -#define ISR_DIS_INT 0x80000000 - -/* Interrupt Mask Register */ -#define REG_IMR 0x1604 - -/* Normal Interrupt mask */ -#define IMR_NORMAL_MASK (\ - ISR_SMB |\ - ISR_GPHY |\ - ISR_PHY_LINKDOWN|\ - ISR_DMAR_TO_RST |\ - ISR_DMAW_TO_RST |\ - ISR_CMB_TX |\ - ISR_CMB_RX ) - -/* Debug Interrupt Mask (enable all interrupt) */ -#define IMR_DEBUG_MASK (\ - ISR_SMB |\ - ISR_TIMER |\ - ISR_MANUAL |\ - ISR_RXF_OV |\ - ISR_RFD_UNRUN |\ - ISR_RRD_OV |\ - ISR_TXF_UNRUN |\ - ISR_LINK |\ - ISR_CMB_TX |\ - ISR_CMB_RX |\ - ISR_RX_PKT |\ - ISR_TX_PKT |\ - ISR_MAC_RX |\ - ISR_MAC_TX ) - -/* Interrupt Status Register */ -#define REG_RFD_RRD_IDX 0x1800 -#define REG_TPD_IDX 0x1804 - -/* MII definition */ -/* PHY Common Register */ -#define MII_AT001_CR 0x09 -#define MII_AT001_SR 0x0A -#define MII_AT001_ESR 0x0F -#define MII_AT001_PSCR 0x10 -#define MII_AT001_PSSR 0x11 - -/* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_MASK 0x2040 -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -/* Link partner ability register. */ -#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ -#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ -#define MII_LPA_PAUSE 0x0400 /* PAUSE */ -#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ -#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ -#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ -#define MII_LPA_NPAGE 0x8000 /* Next page bit */ - -/* Autoneg Advertisement Register */ -#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ -#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ -#define MII_AR_SPEED_MASK 0x01E0 -#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 - -/* 1000BASE-T Control Register */ -#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */ -#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */ -#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */ -#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ -#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 -#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 - -/* 1000BASE-T Status Register */ -#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 - -/* Extended Status Register */ -#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ - -/* AT001 PHY Specific Control Register */ -#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ -#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ -#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ -#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 -#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */ -#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */ -#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ -#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ -#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */ -#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */ -#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ -#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ -#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ -#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ -#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 -#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 -#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 - -/* AT001 PHY Specific Status Register */ -#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ -#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ -#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ -#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ - -/* PCI Command Register Bit Definitions */ -#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ -#define CMD_IO_SPACE 0x0001 -#define CMD_MEMORY_SPACE 0x0002 -#define CMD_BUS_MASTER 0x0004 - -/* Wake Up Filter Control */ -#define ATL1_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define ATL1_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define ATL1_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define ATL1_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ -#define ATL1_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ - -/* Error Codes */ -#define ATL1_SUCCESS 0 -#define ATL1_ERR_EEPROM 1 -#define ATL1_ERR_PHY 2 -#define ATL1_ERR_CONFIG 3 -#define ATL1_ERR_PARAM 4 -#define ATL1_ERR_MAC_TYPE 5 -#define ATL1_ERR_PHY_TYPE 6 -#define ATL1_ERR_PHY_SPEED 7 -#define ATL1_ERR_PHY_RES 8 - -#define SPEED_0 0xffff -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define HALF_DUPLEX 1 -#define FULL_DUPLEX 2 - -#define MEDIA_TYPE_AUTO_SENSOR 0 -#define MEDIA_TYPE_1000M_FULL 1 -#define MEDIA_TYPE_100M_FULL 2 -#define MEDIA_TYPE_100M_HALF 3 -#define MEDIA_TYPE_10M_FULL 4 -#define MEDIA_TYPE_10M_HALF 5 - -#define ADVERTISE_10_HALF 0x0001 -#define ADVERTISE_10_FULL 0x0002 -#define ADVERTISE_100_HALF 0x0004 -#define ADVERTISE_100_FULL 0x0008 -#define ADVERTISE_1000_HALF 0x0010 -#define ADVERTISE_1000_FULL 0x0020 -#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ -#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ -#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ - -#define MAX_JUMBO_FRAME_SIZE 0x2800 - -#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ -#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ - -/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */ -#define EEPROM_SUM 0xBABA - -#define ATL1_EEDUMP_LEN 48 - -/* Statistics counters collected by the MAC */ -struct stats_msg_block { - /* rx */ - u32 rx_ok; /* The number of good packet received. */ - u32 rx_bcast; /* The number of good broadcast packet received. */ - u32 rx_mcast; /* The number of good multicast packet received. */ - u32 rx_pause; /* The number of Pause packet received. */ - u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */ - u32 rx_fcs_err; /* The number of packets with bad FCS. */ - u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */ - u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ - u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ - u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ - u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ - u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ - u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ - u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ - u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ - u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ - u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ - u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */ - u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ - u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ - u32 rx_align_err; /* Alignment Error */ - u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ - u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ - u32 rx_err_addr; /* The number of packets dropped due to address filtering. */ - - /* tx */ - u32 tx_ok; /* The number of good packet transmitted. */ - u32 tx_bcast; /* The number of good broadcast packet transmitted. */ - u32 tx_mcast; /* The number of good multicast packet transmitted. */ - u32 tx_pause; /* The number of Pause packet transmitted. */ - u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ - u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ - u32 tx_defer; /* The number of packets transmitted that is deferred. */ - u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ - u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ - u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ - u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ - u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ - u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ - u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ - u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ - u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ - u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ - u32 tx_late_col; /* The number of packets transmitted with late collisions. */ - u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ - u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ - u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ - u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ - u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ - u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ - u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ - u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update. - * Software should clear this bit as soon as retrieving the statistics information. */ -}; - -/* Coalescing Message Block */ -struct coals_msg_block { - u32 int_stats; /* interrupt status */ - u16 rrd_prod_idx; /* TRD Producer Index. */ - u16 rfd_cons_idx; /* RFD Consumer Index. */ - u16 update; /* Selene sets this bit every time it DMA the CMB to host memory. - * Software supposes to clear this bit when CMB information is processed. */ - u16 tpd_cons_idx; /* TPD Consumer Index. */ -}; - -/* RRD descriptor */ -struct rx_return_desc { - u8 num_buf; /* Number of RFD buffers used by the received packet */ - u8 resved; - u16 buf_indx; /* RFD Index of the first buffer */ - union { - u32 valid; - struct { - u16 rx_chksum; - u16 pkt_size; - } xsum_sz; - } xsz; - - u16 pkt_flg; /* Packet flags */ - u16 err_flg; /* Error flags */ - u16 resved2; - u16 vlan_tag; /* VLAN TAG */ -}; - -#define PACKET_FLAG_ETH_TYPE 0x0080 -#define PACKET_FLAG_VLAN_INS 0x0100 -#define PACKET_FLAG_ERR 0x0200 -#define PACKET_FLAG_IPV4 0x0400 -#define PACKET_FLAG_UDP 0x0800 -#define PACKET_FLAG_TCP 0x1000 -#define PACKET_FLAG_BCAST 0x2000 -#define PACKET_FLAG_MCAST 0x4000 -#define PACKET_FLAG_PAUSE 0x8000 - -#define ERR_FLAG_CRC 0x0001 -#define ERR_FLAG_CODE 0x0002 -#define ERR_FLAG_DRIBBLE 0x0004 -#define ERR_FLAG_RUNT 0x0008 -#define ERR_FLAG_OV 0x0010 -#define ERR_FLAG_TRUNC 0x0020 -#define ERR_FLAG_IP_CHKSUM 0x0040 -#define ERR_FLAG_L4_CHKSUM 0x0080 -#define ERR_FLAG_LEN 0x0100 -#define ERR_FLAG_DES_ADDR 0x0200 - -/* RFD descriptor */ -struct rx_free_desc { - __le64 buffer_addr; /* Address of the descriptor's data buffer */ - __le16 buf_len; /* Size of the receive buffer in host memory, in byte */ - u16 coalese; /* Update consumer index to host after the reception of this frame */ - /* __attribute__ ((packed)) is required */ -} __attribute__ ((packed)); - -/* tsopu defines */ -#define TSO_PARAM_BUFLEN_MASK 0x3FFF -#define TSO_PARAM_BUFLEN_SHIFT 0 -#define TSO_PARAM_DMAINT_MASK 0x0001 -#define TSO_PARAM_DMAINT_SHIFT 14 -#define TSO_PARAM_PKTNT_MASK 0x0001 -#define TSO_PARAM_PKTINT_SHIFT 15 -#define TSO_PARAM_VLANTAG_MASK 0xFFFF -#define TSO_PARAM_VLAN_SHIFT 16 - -/* tsopl defines */ -#define TSO_PARAM_EOP_MASK 0x0001 -#define TSO_PARAM_EOP_SHIFT 0 -#define TSO_PARAM_COALESCE_MASK 0x0001 -#define TSO_PARAM_COALESCE_SHIFT 1 -#define TSO_PARAM_INSVLAG_MASK 0x0001 -#define TSO_PARAM_INSVLAG_SHIFT 2 -#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3 -#define TSO_PARAM_SEGMENT_MASK 0x0001 -#define TSO_PARAM_SEGMENT_SHIFT 4 -#define TSO_PARAM_IPCKSUM_MASK 0x0001 -#define TSO_PARAM_IPCKSUM_SHIFT 5 -#define TSO_PARAM_TCPCKSUM_MASK 0x0001 -#define TSO_PARAM_TCPCKSUM_SHIFT 6 -#define TSO_PARAM_UDPCKSUM_MASK 0x0001 -#define TSO_PARAM_UDPCKSUM_SHIFT 7 -#define TSO_PARAM_VLANTAGGED_MASK 0x0001 -#define TSO_PARAM_VLANTAGGED_SHIFT 8 -#define TSO_PARAM_ETHTYPE_MASK 0x0001 -#define TSO_PARAM_ETHTYPE_SHIFT 9 -#define TSO_PARAM_IPHL_MASK 0x000F -#define TSO_PARAM_IPHL_SHIFT 10 -#define TSO_PARAM_TCPHDRLEN_MASK 0x000F -#define TSO_PARAM_TCPHDRLEN_SHIFT 14 -#define TSO_PARAM_HDRFLAG_MASK 0x0001 -#define TSO_PARAM_HDRFLAG_SHIFT 18 -#define TSO_PARAM_MSS_MASK 0x1FFF -#define TSO_PARAM_MSS_SHIFT 19 - -/* csumpu defines */ -#define CSUM_PARAM_BUFLEN_MASK 0x3FFF -#define CSUM_PARAM_BUFLEN_SHIFT 0 -#define CSUM_PARAM_DMAINT_MASK 0x0001 -#define CSUM_PARAM_DMAINT_SHIFT 14 -#define CSUM_PARAM_PKTINT_MASK 0x0001 -#define CSUM_PARAM_PKTINT_SHIFT 15 -#define CSUM_PARAM_VALANTAG_MASK 0xFFFF -#define CSUM_PARAM_VALAN_SHIFT 16 - -/* csumpl defines*/ -#define CSUM_PARAM_EOP_MASK 0x0001 -#define CSUM_PARAM_EOP_SHIFT 0 -#define CSUM_PARAM_COALESCE_MASK 0x0001 -#define CSUM_PARAM_COALESCE_SHIFT 1 -#define CSUM_PARAM_INSVLAG_MASK 0x0001 -#define CSUM_PARAM_INSVLAG_SHIFT 2 -#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3 -#define CSUM_PARAM_SEGMENT_MASK 0x0001 -#define CSUM_PARAM_SEGMENT_SHIFT 4 -#define CSUM_PARAM_IPCKSUM_MASK 0x0001 -#define CSUM_PARAM_IPCKSUM_SHIFT 5 -#define CSUM_PARAM_TCPCKSUM_MASK 0x0001 -#define CSUM_PARAM_TCPCKSUM_SHIFT 6 -#define CSUM_PARAM_UDPCKSUM_MASK 0x0001 -#define CSUM_PARAM_UDPCKSUM_SHIFT 7 -#define CSUM_PARAM_VLANTAGGED_MASK 0x0001 -#define CSUM_PARAM_VLANTAGGED_SHIFT 8 -#define CSUM_PARAM_ETHTYPE_MASK 0x0001 -#define CSUM_PARAM_ETHTYPE_SHIFT 9 -#define CSUM_PARAM_IPHL_MASK 0x000F -#define CSUM_PARAM_IPHL_SHIFT 10 -#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF -#define CSUM_PARAM_PLOADOFFSET_SHIFT 16 -#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF -#define CSUM_PARAM_XSUMOFFSET_SHIFT 24 - -/* TPD descriptor */ -struct tso_param { - /* The order of these declarations is important -- don't change it */ - u32 tsopu; /* tso_param upper word */ - u32 tsopl; /* tso_param lower word */ -}; - -struct csum_param { - /* The order of these declarations is important -- don't change it */ - u32 csumpu; /* csum_param upper word */ - u32 csumpl; /* csum_param lower word */ -}; - -union tpd_descr { - u64 data; - struct csum_param csum; - struct tso_param tso; -}; - -struct tx_packet_desc { - __le64 buffer_addr; - union tpd_descr desc; -}; - -/* DMA Order Settings */ -enum atl1_dma_order { - atl1_dma_ord_in = 1, - atl1_dma_ord_enh = 2, - atl1_dma_ord_out = 4 -}; - -enum atl1_dma_rcb { - atl1_rcb_64 = 0, - atl1_rcb_128 = 1 -}; - -enum atl1_dma_req_block { - atl1_dma_req_128 = 0, - atl1_dma_req_256 = 1, - atl1_dma_req_512 = 2, - atl1_dma_req_1024 = 3, - atl1_dma_req_2048 = 4, - atl1_dma_req_4096 = 5 -}; - -struct atl1_spi_flash_dev { - const char *manu_name; /* manufacturer id */ - /* op-code */ - u8 cmd_wrsr; - u8 cmd_read; - u8 cmd_program; - u8 cmd_wren; - u8 cmd_wrdi; - u8 cmd_rdsr; - u8 cmd_rdid; - u8 cmd_sector_erase; - u8 cmd_chip_erase; -}; - -#endif /* _ATL1_HW_H_ */ diff --git a/drivers/net/atlx/atl1_main.c b/drivers/net/atlx/atl1_main.c deleted file mode 100644 index 9200ee5..0000000 --- a/drivers/net/atlx/atl1_main.c +++ /dev/null @@ -1,2453 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * The full GNU General Public License is included in this distribution in the - * file called COPYING. - * - * Contact Information: - * Xiong Huang - * Attansic Technology Corp. 3F 147, Xianzheng 9th Road, Zhubei, - * Xinzhu 302, TAIWAN, REPUBLIC OF CHINA - * - * Chris Snook - * Jay Cliburn - * - * This version is adapted from the Attansic reference driver for - * inclusion in the Linux kernel. It is currently under heavy development. - * A very incomplete list of things that need to be dealt with: - * - * TODO: - * Fix TSO; tx performance is horrible with TSO enabled. - * Wake on LAN. - * Add more ethtool functions. - * Fix abstruse irq enable/disable condition described here: - * http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2 - * - * NEEDS TESTING: - * VLAN - * multicast - * promiscuous mode - * interrupt coalescing - * SMP torture testing - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "atl1.h" - -#define DRIVER_VERSION "2.0.7" - -char atl1_driver_name[] = "atl1"; -static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver"; -static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation."; -char atl1_driver_version[] = DRIVER_VERSION; - -MODULE_AUTHOR - ("Attansic Corporation , Chris Snook , Jay Cliburn "); -MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRIVER_VERSION); - -/* - * atl1_pci_tbl - PCI Device ID Table - */ -static const struct pci_device_id atl1_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)}, - /* required last entry */ - {0,} -}; - -MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); - -/* - * atl1_sw_init - Initialize general software structures (struct atl1_adapter) - * @adapter: board private structure to initialize - * - * atl1_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - */ -static int __devinit atl1_sw_init(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - - hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - - adapter->wol = 0; - adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; - adapter->ict = 50000; /* 100ms */ - adapter->link_speed = SPEED_0; /* hardware init */ - adapter->link_duplex = FULL_DUPLEX; - - hw->phy_configured = false; - hw->preamble_len = 7; - hw->ipgt = 0x60; - hw->min_ifg = 0x50; - hw->ipgr1 = 0x40; - hw->ipgr2 = 0x60; - hw->max_retry = 0xf; - hw->lcol = 0x37; - hw->jam_ipg = 7; - hw->rfd_burst = 8; - hw->rrd_burst = 8; - hw->rfd_fetch_gap = 1; - hw->rx_jumbo_th = adapter->rx_buffer_len / 8; - hw->rx_jumbo_lkah = 1; - hw->rrd_ret_timer = 16; - hw->tpd_burst = 4; - hw->tpd_fetch_th = 16; - hw->txf_burst = 0x100; - hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; - hw->tpd_fetch_gap = 1; - hw->rcb_value = atl1_rcb_64; - hw->dma_ord = atl1_dma_ord_enh; - hw->dmar_block = atl1_dma_req_256; - hw->dmaw_block = atl1_dma_req_256; - hw->cmb_rrd = 4; - hw->cmb_tpd = 4; - hw->cmb_rx_timer = 1; /* about 2us */ - hw->cmb_tx_timer = 1; /* about 2us */ - hw->smb_timer = 100000; /* about 200ms */ - - spin_lock_init(&adapter->lock); - spin_lock_init(&adapter->mb_lock); - - return 0; -} - -static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - u16 result; - - atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); - - return result; -} - -static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, - int val) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - - atl1_write_phy_reg(&adapter->hw, reg_num, val); -} - -/* - * atl1_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ -static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - unsigned long flags; - int retval; - - if (!netif_running(netdev)) - return -EINVAL; - - spin_lock_irqsave(&adapter->lock, flags); - retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); - spin_unlock_irqrestore(&adapter->lock, flags); - - return retval; -} - -/* - * atl1_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ -static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return atl1_mii_ioctl(netdev, ifr, cmd); - default: - return -EOPNOTSUPP; - } -} - -/* - * atl1_setup_mem_resources - allocate Tx / RX descriptor resources - * @adapter: board private structure - * - * Return 0 on success, negative on failure - */ -s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - struct pci_dev *pdev = adapter->pdev; - int size; - u8 offset = 0; - - size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); - tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); - if (unlikely(!tpd_ring->buffer_info)) { - dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); - goto err_nomem; - } - rfd_ring->buffer_info = - (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); - - /* real ring DMA buffer - * each ring/block may need up to 8 bytes for alignment, hence the - * additional 40 bytes tacked onto the end. - */ - ring_header->size = size = - sizeof(struct tx_packet_desc) * tpd_ring->count - + sizeof(struct rx_free_desc) * rfd_ring->count - + sizeof(struct rx_return_desc) * rrd_ring->count - + sizeof(struct coals_msg_block) - + sizeof(struct stats_msg_block) - + 40; - - ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, - &ring_header->dma); - if (unlikely(!ring_header->desc)) { - dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); - goto err_nomem; - } - - memset(ring_header->desc, 0, ring_header->size); - - /* init TPD ring */ - tpd_ring->dma = ring_header->dma; - offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; - tpd_ring->dma += offset; - tpd_ring->desc = (u8 *) ring_header->desc + offset; - tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; - - /* init RFD ring */ - rfd_ring->dma = tpd_ring->dma + tpd_ring->size; - offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; - rfd_ring->dma += offset; - rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); - rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; - - - /* init RRD ring */ - rrd_ring->dma = rfd_ring->dma + rfd_ring->size; - offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; - rrd_ring->dma += offset; - rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); - rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; - - - /* init CMB */ - adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; - offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; - adapter->cmb.dma += offset; - adapter->cmb.cmb = (struct coals_msg_block *) - ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); - - /* init SMB */ - adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); - offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; - adapter->smb.dma += offset; - adapter->smb.smb = (struct stats_msg_block *) - ((u8 *) adapter->cmb.cmb + - (sizeof(struct coals_msg_block) + offset)); - - return ATL1_SUCCESS; - -err_nomem: - kfree(tpd_ring->buffer_info); - return -ENOMEM; -} - -static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); - - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); - - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); -} - -/* - * atl1_clean_rx_ring - Free RFD Buffers - * @adapter: board private structure - */ -static void atl1_clean_rx_ring(struct atl1_adapter *adapter) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rfd_ring->count; i++) { - buffer_info = &rfd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; - } - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct atl1_buffer) * rfd_ring->count; - memset(rfd_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(rfd_ring->desc, 0, rfd_ring->size); - - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); - - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); -} - -/* - * atl1_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure - */ -static void atl1_clean_tx_ring(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Tx ring sk_buffs */ - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - } - - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->skb) { - dev_kfree_skb_any(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct atl1_buffer) * tpd_ring->count; - memset(tpd_ring->buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(tpd_ring->desc, 0, tpd_ring->size); - - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); -} - -/* - * atl1_free_ring_resources - Free Tx / RX descriptor Resources - * @adapter: board private structure - * - * Free all transmit software resources - */ -void atl1_free_ring_resources(struct atl1_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); - - kfree(tpd_ring->buffer_info); - pci_free_consistent(pdev, ring_header->size, ring_header->desc, - ring_header->dma); - - tpd_ring->buffer_info = NULL; - tpd_ring->desc = NULL; - tpd_ring->dma = 0; - - rfd_ring->buffer_info = NULL; - rfd_ring->desc = NULL; - rfd_ring->dma = 0; - - rrd_ring->desc = NULL; - rrd_ring->dma = 0; -} - -static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) -{ - u32 value; - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - /* Config MAC CTRL Register */ - value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; - /* duplex */ - if (FULL_DUPLEX == adapter->link_duplex) - value |= MAC_CTRL_DUPLX; - /* speed */ - value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? - MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << - MAC_CTRL_SPEED_SHIFT); - /* flow control */ - value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); - /* PAD & CRC */ - value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); - /* preamble length */ - value |= (((u32) adapter->hw.preamble_len - & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); - /* vlan */ - if (adapter->vlgrp) - value |= MAC_CTRL_RMV_VLAN; - /* rx checksum - if (adapter->rx_csum) - value |= MAC_CTRL_RX_CHKSUM_EN; - */ - /* filter mode */ - value |= MAC_CTRL_BC_EN; - if (netdev->flags & IFF_PROMISC) - value |= MAC_CTRL_PROMIS_EN; - else if (netdev->flags & IFF_ALLMULTI) - value |= MAC_CTRL_MC_ALL_EN; - /* value |= MAC_CTRL_LOOPBACK; */ - iowrite32(value, hw->hw_addr + REG_MAC_CTRL); -} - -/* - * atl1_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - */ -static int atl1_set_mac(struct net_device *netdev, void *p) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct sockaddr *addr = p; - - if (netif_running(netdev)) - return -EBUSY; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); - - atl1_set_mac_addr(&adapter->hw); - return 0; -} - -static u32 atl1_check_link(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 ret_val; - u16 speed, duplex, phy_data; - int reconfig = 0; - - /* MII_BMSR must read twice */ - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - if (!(phy_data & BMSR_LSTATUS)) { /* link down */ - if (netif_carrier_ok(netdev)) { /* old link state: Up */ - dev_info(&adapter->pdev->dev, "link is down\n"); - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - return ATL1_SUCCESS; - } - - /* Link Up */ - ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) - return ret_val; - - switch (hw->media_type) { - case MEDIA_TYPE_1000M_FULL: - if (speed != SPEED_1000 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_FULL: - if (speed != SPEED_100 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_HALF: - if (speed != SPEED_100 || duplex != HALF_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_FULL: - if (speed != SPEED_10 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_HALF: - if (speed != SPEED_10 || duplex != HALF_DUPLEX) - reconfig = 1; - break; - } - - /* link result is our setting */ - if (!reconfig) { - if (adapter->link_speed != speed - || adapter->link_duplex != duplex) { - adapter->link_speed = speed; - adapter->link_duplex = duplex; - atl1_setup_mac_ctrl(adapter); - dev_info(&adapter->pdev->dev, - "%s link is up %d Mbps %s\n", - netdev->name, adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "full duplex" : "half duplex"); - } - if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } - return ATL1_SUCCESS; - } - - /* change orignal link status */ - if (netif_carrier_ok(netdev)) { - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - - if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && - hw->media_type != MEDIA_TYPE_1000M_FULL) { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - return ATL1_SUCCESS; - } - - /* auto-neg, insert timer to re-config phy */ - if (!adapter->phy_timer_pending) { - adapter->phy_timer_pending = true; - mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); - } - - return ATL1_SUCCESS; -} - -static void atl1_check_for_link(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - u16 phy_data = 0; - - spin_lock(&adapter->lock); - adapter->phy_timer_pending = false; - atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); - atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); - spin_unlock(&adapter->lock); - - /* notify upper layer link down ASAP */ - if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ - if (netif_carrier_ok(netdev)) { /* old link state: Up */ - dev_info(&adapter->pdev->dev, "%s link is down\n", - netdev->name); - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - } - schedule_work(&adapter->link_chg_task); -} - -/* - * atl1_set_multi - Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, - * promiscuous mode, and all-multi behavior. - */ -static void atl1_set_multi(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - struct dev_mc_list *mc_ptr; - u32 rctl; - u32 hash_value; - - /* Check for Promiscuous and All Multicast modes */ - rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); - if (netdev->flags & IFF_PROMISC) - rctl |= MAC_CTRL_PROMIS_EN; - else if (netdev->flags & IFF_ALLMULTI) { - rctl |= MAC_CTRL_MC_ALL_EN; - rctl &= ~MAC_CTRL_PROMIS_EN; - } else - rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); - - iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); - - /* clear the old settings from the multicast hash table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - /* compute mc addresses' hash value ,and put it into hash table */ - for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { - hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr); - atl1_hash_set(hw, hash_value); - } -} - -/* - * atl1_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - */ -static int atl1_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - - adapter->hw.max_frame_size = max_frame; - adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; - adapter->rx_buffer_len = (max_frame + 7) & ~7; - adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; - - netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { - atl1_down(adapter); - atl1_up(adapter); - } - - return 0; -} - -static void set_flow_ctrl_old(struct atl1_adapter *adapter) -{ - u32 hi, lo, value; - - /* RFD Flow Control */ - value = adapter->rfd_ring.count; - hi = value / 16; - if (hi < 2) - hi = 2; - lo = value * 7 / 8; - - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - - /* RRD Flow Control */ - value = adapter->rrd_ring.count; - lo = value / 16; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -static void set_flow_ctrl_new(struct atl1_hw *hw) -{ - u32 hi, lo, value; - - /* RXF Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); - lo = value / 16; - if (lo < 192) - lo = 192; - hi = value * 7 / 8; - if (hi < lo) - hi = lo + 16; - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - - /* RRD Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); - lo = value / 8; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - if (hi < lo) - hi = lo + 3; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -/* - * atl1_configure - Configure Transmit&Receive Unit after Reset - * @adapter: board private structure - * - * Configure the Tx /Rx unit of the MAC after a reset. - */ -static u32 atl1_configure(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - u32 value; - - /* clear interrupt status */ - iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); - - /* set MAC Address */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | - (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - - /* tx / rx ring */ - - /* HI base address */ - iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), - hw->hw_addr + REG_DESC_BASE_ADDR_HI); - /* LO base address */ - iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RFD_ADDR_LO); - iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RRD_ADDR_LO); - iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_TPD_ADDR_LO); - iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_CMB_ADDR_LO); - iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_SMB_ADDR_LO); - - /* element count */ - value = adapter->rrd_ring.count; - value <<= 16; - value += adapter->rfd_ring.count; - iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); - iowrite32(adapter->tpd_ring.count, hw->hw_addr + - REG_DESC_TPD_RING_SIZE); - - /* Load Ptr */ - iowrite32(1, hw->hw_addr + REG_LOAD_PTR); - - /* config Mailbox */ - value = ((atomic_read(&adapter->tpd_ring.next_to_use) - & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | - ((atomic_read(&adapter->rrd_ring.next_to_clean) - & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | - ((atomic_read(&adapter->rfd_ring.next_to_use) - & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAILBOX); - - /* config IPG/IFG */ - value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) - << MAC_IPG_IFG_IPGT_SHIFT) | - (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) - << MAC_IPG_IFG_MIFG_SHIFT) | - (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) - << MAC_IPG_IFG_IPGR1_SHIFT) | - (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) - << MAC_IPG_IFG_IPGR2_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); - - /* config Half-Duplex Control */ - value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | - (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) - << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | - MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | - (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | - (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) - << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); - - /* set Interrupt Moderator Timer */ - iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); - iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); - - /* set Interrupt Clear Timer */ - iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); - - /* set max frame size hw will accept */ - iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); - - /* jumbo size & rrd retirement timer */ - value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) - << RXQ_JMBOSZ_TH_SHIFT) | - (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) - << RXQ_JMBO_LKAH_SHIFT) | - (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) - << RXQ_RRD_TIMER_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); - - /* Flow Control */ - switch (hw->dev_rev) { - case 0x8001: - case 0x9001: - case 0x9002: - case 0x9003: - set_flow_ctrl_old(adapter); - break; - default: - set_flow_ctrl_new(hw); - break; - } - - /* config TXQ */ - value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) - << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | - (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) - << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | - (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) - << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | - TXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); - - /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ - value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) - << TX_JUMBO_TASK_TH_SHIFT) | - (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) - << TX_TPD_MIN_IPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); - - /* config RXQ */ - value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) - << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | - (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) - << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | - (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) - << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | - RXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); - - /* config DMA Engine */ - value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) - << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | - ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) - << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | - DMA_CTRL_DMAW_EN; - value |= (u32) hw->dma_ord; - if (atl1_rcb_128 == hw->rcb_value) - value |= DMA_CTRL_RCB_VALUE; - iowrite32(value, hw->hw_addr + REG_DMA_CTRL); - - /* config CMB / SMB */ - value = (hw->cmb_tpd > adapter->tpd_ring.count) ? - hw->cmb_tpd : adapter->tpd_ring.count; - value <<= 16; - value |= hw->cmb_rrd; - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); - value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); - iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); - - /* --- enable CMB / SMB */ - value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; - iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); - - value = ioread32(adapter->hw.hw_addr + REG_ISR); - if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) - value = 1; /* config failed */ - else - value = 0; - - /* clear all interrupt status */ - iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); - iowrite32(0, adapter->hw.hw_addr + REG_ISR); - return value; -} - -/* - * atl1_pcie_patch - Patch for PCIE module - */ -static void atl1_pcie_patch(struct atl1_adapter *adapter) -{ - u32 value; - - /* much vendor magic here */ - value = 0x6500; - iowrite32(value, adapter->hw.hw_addr + 0x12FC); - /* pcie flow control mode change */ - value = ioread32(adapter->hw.hw_addr + 0x1008); - value |= 0x8000; - iowrite32(value, adapter->hw.hw_addr + 0x1008); -} - -/* - * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 - * on PCI Command register is disable. - * The function enable this bit. - * Brackett, 2006/03/15 - */ -static void atl1_via_workaround(struct atl1_adapter *adapter) -{ - unsigned long value; - - value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); - if (value & PCI_COMMAND_INTX_DISABLE) - value &= ~PCI_COMMAND_INTX_DISABLE; - iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); -} - -/* - * atl1_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - */ -static void atl1_irq_enable(struct atl1_adapter *adapter) -{ - iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); - ioread32(adapter->hw.hw_addr + REG_IMR); -} - -/* - * atl1_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - */ -static void atl1_irq_disable(struct atl1_adapter *adapter) -{ - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - ioread32(adapter->hw.hw_addr + REG_IMR); - synchronize_irq(adapter->pdev->irq); -} - -static void atl1_clear_phy_int(struct atl1_adapter *adapter) -{ - u16 phy_data; - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - atl1_read_phy_reg(&adapter->hw, 19, &phy_data); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_inc_smb(struct atl1_adapter *adapter) -{ - struct stats_msg_block *smb = adapter->smb.smb; - - /* Fill out the OS statistics structure */ - adapter->soft_stats.rx_packets += smb->rx_ok; - adapter->soft_stats.tx_packets += smb->tx_ok; - adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; - adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; - adapter->soft_stats.multicast += smb->rx_mcast; - adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + - smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); - - /* Rx Errors */ - adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + - smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + - smb->rx_rrd_ov + smb->rx_align_err); - adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; - adapter->soft_stats.rx_length_errors += smb->rx_len_err; - adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; - adapter->soft_stats.rx_frame_errors += smb->rx_align_err; - adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + - smb->rx_rxf_ov); - - adapter->soft_stats.rx_pause += smb->rx_pause; - adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; - adapter->soft_stats.rx_trunc += smb->rx_sz_ov; - - /* Tx Errors */ - adapter->soft_stats.tx_errors += (smb->tx_late_col + - smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); - adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; - adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; - adapter->soft_stats.tx_window_errors += smb->tx_late_col; - - adapter->soft_stats.excecol += smb->tx_abort_col; - adapter->soft_stats.deffer += smb->tx_defer; - adapter->soft_stats.scc += smb->tx_1_col; - adapter->soft_stats.mcc += smb->tx_2_col; - adapter->soft_stats.latecol += smb->tx_late_col; - adapter->soft_stats.tx_underun += smb->tx_underrun; - adapter->soft_stats.tx_trunc += smb->tx_trunc; - adapter->soft_stats.tx_pause += smb->tx_pause; - - adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; - adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; - adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; - adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; - adapter->net_stats.multicast = adapter->soft_stats.multicast; - adapter->net_stats.collisions = adapter->soft_stats.collisions; - adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; - adapter->net_stats.rx_over_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.rx_length_errors = - adapter->soft_stats.rx_length_errors; - adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; - adapter->net_stats.rx_frame_errors = - adapter->soft_stats.rx_frame_errors; - adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; - adapter->net_stats.rx_missed_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; - adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; - adapter->net_stats.tx_aborted_errors = - adapter->soft_stats.tx_aborted_errors; - adapter->net_stats.tx_window_errors = - adapter->soft_stats.tx_window_errors; - adapter->net_stats.tx_carrier_errors = - adapter->soft_stats.tx_carrier_errors; -} - -/* - * atl1_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are actually updated from the timer callback. - */ -static struct net_device_stats *atl1_get_stats(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - return &adapter->net_stats; -} - -static void atl1_update_mailbox(struct atl1_adapter *adapter) -{ - unsigned long flags; - u32 tpd_next_to_use; - u32 rfd_next_to_use; - u32 rrd_next_to_clean; - u32 value; - - spin_lock_irqsave(&adapter->mb_lock, flags); - - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); - - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - - spin_unlock_irqrestore(&adapter->mb_lock, flags); -} - -static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, u16 offset) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - - while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { - rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; - if (++rfd_ring->next_to_clean == rfd_ring->count) { - rfd_ring->next_to_clean = 0; - } - } -} - -static void atl1_update_rfd_index(struct atl1_adapter *adapter, - struct rx_return_desc *rrd) -{ - u16 num_buf; - - num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / - adapter->rx_buffer_len; - if (rrd->num_buf == num_buf) - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, num_buf); -} - -static void atl1_rx_checksum(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, struct sk_buff *skb) -{ - struct pci_dev *pdev = adapter->pdev; - - skb->ip_summed = CHECKSUM_NONE; - - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | - ERR_FLAG_CODE | ERR_FLAG_OV)) { - adapter->hw_csum_err++; - dev_printk(KERN_DEBUG, &pdev->dev, - "rx checksum error\n"); - return; - } - } - - /* not IPv4 */ - if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) - /* checksum is invalid, but it's not an IPv4 pkt, so ok */ - return; - - /* IPv4 packet */ - if (likely(!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; - return; - } - - /* IPv4, but hardware thinks its checksum is wrong */ - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); - adapter->hw_csum_err++; - return; -} - -/* - * atl1_alloc_rx_buffers - Replace used receive buffers - * @adapter: address of board private structure - */ -static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct pci_dev *pdev = adapter->pdev; - struct page *page; - unsigned long offset; - struct atl1_buffer *buffer_info, *next_info; - struct sk_buff *skb; - u16 num_alloc = 0; - u16 rfd_next_to_use, next_next; - struct rx_free_desc *rfd_desc; - - next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); - if (++next_next == rfd_ring->count) - next_next = 0; - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; - - while (!buffer_info->alloced && !next_info->alloced) { - if (buffer_info->skb) { - buffer_info->alloced = 1; - goto next; - } - - rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); - - skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); - if (unlikely(!skb)) { /* Better luck next round */ - adapter->net_stats.rx_dropped++; - break; - } - - /* - * Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - - buffer_info->alloced = 1; - buffer_info->skb = skb; - buffer_info->length = (u16) adapter->rx_buffer_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(pdev, page, offset, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); - rfd_desc->coalese = 0; - -next: - rfd_next_to_use = next_next; - if (unlikely(++next_next == rfd_ring->count)) - next_next = 0; - - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; - num_alloc++; - } - - if (num_alloc) { - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); - } - return num_alloc; -} - -static void atl1_intr_rx(struct atl1_adapter *adapter) -{ - int i, count; - u16 length; - u16 rrd_next_to_clean; - u32 value; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct rx_return_desc *rrd; - struct sk_buff *skb; - - count = 0; - - rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); - - while (1) { - rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); - i = 1; - if (likely(rrd->xsz.valid)) { /* packet valid */ -chk_rrd: - /* check rrd status */ - if (likely(rrd->num_buf == 1)) - goto rrd_ok; - - /* rrd seems to be bad */ - if (unlikely(i-- > 0)) { - /* rrd may not be DMAed completely */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "incomplete RRD DMA transfer\n"); - udelay(1); - goto chk_rrd; - } - /* bad rrd */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "bad RRD\n"); - /* see if update RFD index */ - if (rrd->num_buf > 1) - atl1_update_rfd_index(adapter, rrd); - - /* update rrd */ - rrd->xsz.valid = 0; - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - continue; - } else { /* current rrd still not be updated */ - - break; - } -rrd_ok: - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, 0); - - buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; - if (++rfd_ring->next_to_clean == rfd_ring->count) - rfd_ring->next_to_clean = 0; - - /* update rrd next to clean */ - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM - | ERR_FLAG_LEN))) { - /* packet error, don't need upstream */ - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - continue; - } - } - - /* Good Receive */ - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - skb = buffer_info->skb; - length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); - - skb_put(skb, length - ETH_FCS_LEN); - - /* Receive Checksum Offload */ - atl1_rx_checksum(adapter, rrd, skb); - skb->protocol = eth_type_trans(skb, adapter->netdev); - - if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { - u16 vlan_tag = (rrd->vlan_tag >> 4) | - ((rrd->vlan_tag & 7) << 13) | - ((rrd->vlan_tag & 8) << 9); - vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); - } else - netif_rx(skb); - - /* let protocol layer free skb */ - buffer_info->skb = NULL; - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - - adapter->netdev->last_rx = jiffies; - } - - atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); - - atl1_alloc_rx_buffers(adapter); - - /* update mailbox ? */ - if (count) { - u32 tpd_next_to_use; - u32 rfd_next_to_use; - - spin_lock(&adapter->mb_lock); - - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = - atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = - atomic_read(&adapter->rrd_ring.next_to_clean); - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - spin_unlock(&adapter->mb_lock); - } -} - -static void atl1_intr_tx(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - u16 sw_tpd_next_to_clean; - u16 cmb_tpd_next_to_clean; - - sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); - cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); - - while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { - struct tx_packet_desc *tpd; - - tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); - buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; - if (buffer_info->dma) { - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb_irq(buffer_info->skb); - buffer_info->skb = NULL; - } - tpd->buffer_addr = 0; - tpd->desc.data = 0; - - if (++sw_tpd_next_to_clean == tpd_ring->count) - sw_tpd_next_to_clean = 0; - } - atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); - - if (netif_queue_stopped(adapter->netdev) - && netif_carrier_ok(adapter->netdev)) - netif_wake_queue(adapter->netdev); -} - -static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) -{ - u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); - u16 next_to_use = atomic_read(&tpd_ring->next_to_use); - return ((next_to_clean > next_to_use) ? - next_to_clean - next_to_use - 1 : - tpd_ring->count + next_to_clean - next_to_use - 1); -} - -static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tso_param *tso) -{ - /* We enter this function holding a spinlock. */ - u8 ipofst; - int err; - - if (skb_shinfo(skb)->gso_size) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (unlikely(err)) - return err; - } - - if (skb->protocol == ntohs(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, IPPROTO_TCP, 0); - ipofst = skb_network_offset(skb); - if (ipofst != ETH_HLEN) /* 802.3 frame */ - tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; - - tso->tsopl |= (iph->ihl & - CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; - tso->tsopl |= (tcp_hdrlen(skb) & - TSO_PARAM_TCPHDRLEN_MASK) << - TSO_PARAM_TCPHDRLEN_SHIFT; - tso->tsopl |= (skb_shinfo(skb)->gso_size & - TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; - return true; - } - } - return false; -} - -static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, - struct csum_param *csum) -{ - u8 css, cso; - - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - cso = skb_transport_offset(skb); - css = cso + skb->csum_offset; - if (unlikely(cso & 0x1)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "payload offset not an even number\n"); - return -1; - } - csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << - CSUM_PARAM_PLOADOFFSET_SHIFT; - csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << - CSUM_PARAM_XSUMOFFSET_SHIFT; - csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; - return true; - } - - return true; -} - -static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, - bool tcp_seg) -{ - /* We enter this function holding a spinlock. */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct page *page; - int first_buf_len = skb->len; - unsigned long offset; - unsigned int nr_frags; - unsigned int f; - u16 tpd_next_to_use; - u16 proto_hdr_len; - u16 len12; - - first_buf_len -= skb->data_len; - nr_frags = skb_shinfo(skb)->nr_frags; - tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - buffer_info->skb = NULL; /* put skb in last TPD */ - - if (tcp_seg) { - /* TSO/GSO */ - proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - buffer_info->length = proto_hdr_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, proto_hdr_len, - PCI_DMA_TODEVICE); - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - - if (first_buf_len > proto_hdr_len) { - int i, m; - - len12 = first_buf_len - proto_hdr_len; - m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { - buffer_info = - &tpd_ring->buffer_info[tpd_next_to_use]; - buffer_info->skb = NULL; - buffer_info->length = - (ATL1_MAX_TX_BUF_LEN >= - len12) ? ATL1_MAX_TX_BUF_LEN : len12; - len12 -= buffer_info->length; - page = virt_to_page(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)); - offset = (unsigned long)(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, - page, offset, buffer_info->length, - PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - } - } else { - /* not TSO/GSO */ - buffer_info->length = first_buf_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, first_buf_len, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - u16 lenf, i, m; - - frag = &skb_shinfo(skb)->frags[f]; - lenf = frag->size; - - m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - buffer_info->skb = NULL; - buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? - ATL1_MAX_TX_BUF_LEN : lenf; - lenf -= buffer_info->length; - buffer_info->dma = pci_map_page(adapter->pdev, - frag->page, - frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), - buffer_info->length, PCI_DMA_TODEVICE); - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - } - - /* last tpd's buffer-info */ - buffer_info->skb = skb; -} - -static void atl1_tx_queue(struct atl1_adapter *adapter, int count, - union tpd_descr *descr) -{ - /* We enter this function holding a spinlock. */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - int j; - u32 val; - struct atl1_buffer *buffer_info; - struct tx_packet_desc *tpd; - u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); - - for (j = 0; j < count; j++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); - tpd->desc.csum.csumpu = descr->csum.csumpu; - tpd->desc.csum.csumpl = descr->csum.csumpl; - tpd->desc.tso.tsopu = descr->tso.tsopu; - tpd->desc.tso.tsopl = descr->tso.tsopl; - tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->desc.data = descr->data; - tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & - CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; - - val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & - TSO_PARAM_SEGMENT_MASK; - if (val && !j) - tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; - - if (j == (count - 1)) - tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; - - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; - } - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - - atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); -} - -static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int len = skb->len; - int tso; - int count = 1; - int ret_val; - u32 val; - union tpd_descr param; - u16 frag_size; - u16 vlan_tag; - unsigned long flags; - unsigned int nr_frags = 0; - unsigned int mss = 0; - unsigned int f; - unsigned int proto_hdr_len; - - len -= skb->data_len; - - if (unlikely(skb->len == 0)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - param.data = 0; - param.tso.tsopu = 0; - param.tso.tsopl = 0; - param.csum.csumpu = 0; - param.csum.csumpl = 0; - - /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ - nr_frags = skb_shinfo(skb)->nr_frags; - for (f = 0; f < nr_frags; f++) { - frag_size = skb_shinfo(skb)->frags[f].size; - if (frag_size) - count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - } - - /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ - mss = skb_shinfo(skb)->gso_size; - if (mss) { - if (skb->protocol == htons(ETH_P_IP)) { - proto_hdr_len = (skb_transport_offset(skb) + - tcp_hdrlen(skb)); - if (unlikely(proto_hdr_len > len)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - /* need additional TPD ? */ - if (proto_hdr_len != len) - count += (len - proto_hdr_len + - ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - } - } - - if (!spin_trylock_irqsave(&adapter->lock, flags)) { - /* Can't get lock - tell upper layer to requeue */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); - return NETDEV_TX_LOCKED; - } - - if (atl1_tpd_avail(&adapter->tpd_ring) < count) { - /* not enough descriptors */ - netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->lock, flags); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); - return NETDEV_TX_BUSY; - } - - param.data = 0; - - if (adapter->vlgrp && vlan_tx_tag_present(skb)) { - vlan_tag = vlan_tx_tag_get(skb); - vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | - ((vlan_tag >> 9) & 0x8); - param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; - param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << - CSUM_PARAM_VALAN_SHIFT; - } - - tso = atl1_tso(adapter, skb, ¶m.tso); - if (tso < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (!tso) { - ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); - if (ret_val < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - } - - val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & - CSUM_PARAM_SEGMENT_MASK; - atl1_tx_map(adapter, skb, 1 == val); - atl1_tx_queue(adapter, count, ¶m); - netdev->trans_start = jiffies; - spin_unlock_irqrestore(&adapter->lock, flags); - atl1_update_mailbox(adapter); - return NETDEV_TX_OK; -} - -/* - * atl1_intr - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure - */ -static irqreturn_t atl1_intr(int irq, void *data) -{ - struct atl1_adapter *adapter = netdev_priv(data); - u32 status; - u8 update_rx; - int max_ints = 10; - - status = adapter->cmb.cmb->int_stats; - if (!status) - return IRQ_NONE; - - update_rx = 0; - - do { - /* clear CMB interrupt status at once */ - adapter->cmb.cmb->int_stats = 0; - - if (status & ISR_GPHY) /* clear phy status */ - atl1_clear_phy_int(adapter); - - /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ - iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); - - /* check if SMB intr */ - if (status & ISR_SMB) - atl1_inc_smb(adapter); - - /* check if PCIE PHY Link down */ - if (status & ISR_PHY_LINKDOWN) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie phy link down %x\n", status); - if (netif_running(adapter->netdev)) { /* reset MAC */ - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } - } - - /* check if DMA read/write error ? */ - if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie DMA r/w error (status = 0x%x)\n", - status); - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } - - /* link event */ - if (status & ISR_GPHY) { - adapter->soft_stats.tx_carrier_errors++; - atl1_check_for_link(adapter); - } - - /* transmit event */ - if (status & ISR_CMB_TX) - atl1_intr_tx(adapter); - - /* rx exception */ - if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV | ISR_CMB_RX))) { - if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "rx exception, ISR = 0x%x\n", status); - atl1_intr_rx(adapter); - } - - if (--max_ints < 0) - break; - - } while ((status = adapter->cmb.cmb->int_stats)); - - /* re-enable Interrupt */ - iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); - return IRQ_HANDLED; -} - -/* - * atl1_watchdog - Timer Call-back - * @data: pointer to netdev cast into an unsigned long - */ -static void atl1_watchdog(unsigned long data) -{ - struct atl1_adapter *adapter = (struct atl1_adapter *)data; - - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); -} - -/* - * atl1_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long - */ -static void atl1_phy_config(unsigned long data) -{ - struct atl1_adapter *adapter = (struct atl1_adapter *)data; - struct atl1_hw *hw = &adapter->hw; - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - adapter->phy_timer_pending = false; - atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); - atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg); - atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -/* - * atl1_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - */ -static void atl1_tx_timeout(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - /* Do the reset outside of interrupt context */ - schedule_work(&adapter->tx_timeout_task); -} - -/* - * Orphaned vendor comment left intact here: - * - * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT - * will assert. We do soft reset <0x1400=1> according - * with the SPEC. BUT, it seemes that PCIE or DMA - * state-machine will not be reset. DMAR_TO_INT will - * assert again and again. - * - */ -static void atl1_tx_timeout_task(struct work_struct *work) -{ - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); - struct net_device *netdev = adapter->netdev; - - netif_device_detach(netdev); - atl1_down(adapter); - atl1_up(adapter); - netif_device_attach(netdev); -} - -/* - * atl1_link_chg_task - deal with link change event Out of interrupt context - */ -static void atl1_link_chg_task(struct work_struct *work) -{ - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, link_chg_task); - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - atl1_check_link(adapter); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_vlan_rx_register(struct net_device *netdev, - struct vlan_group *grp) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - unsigned long flags; - u32 ctrl; - - spin_lock_irqsave(&adapter->lock, flags); - /* atl1_irq_disable(adapter); */ - adapter->vlgrp = grp; - - if (grp) { - /* enable VLAN tag insert/strip */ - ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); - ctrl |= MAC_CTRL_RMV_VLAN; - iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); - } else { - /* disable VLAN tag insert/strip */ - ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_RMV_VLAN; - iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); - } - - /* atl1_irq_enable(adapter); */ - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static void atl1_restore_vlan(struct atl1_adapter *adapter) -{ - atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp); -} - -int atl1_reset(struct atl1_adapter *adapter) -{ - int ret; - - ret = atl1_reset_hw(&adapter->hw); - if (ret != ATL1_SUCCESS) - return ret; - return atl1_init_hw(&adapter->hw); -} - -s32 atl1_up(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int err; - int irq_flags = IRQF_SAMPLE_RANDOM; - - /* hardware has been reset, we need to reload some things */ - atl1_set_multi(netdev); - atl1_init_ring_ptrs(adapter); - atl1_restore_vlan(adapter); - err = atl1_alloc_rx_buffers(adapter); - if (unlikely(!err)) /* no RX BUFFER allocated */ - return -ENOMEM; - - if (unlikely(atl1_configure(adapter))) { - err = -EIO; - goto err_up; - } - - err = pci_enable_msi(adapter->pdev); - if (err) { - dev_info(&adapter->pdev->dev, - "Unable to enable MSI: %d\n", err); - irq_flags |= IRQF_SHARED; - } - - err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, - netdev->name, netdev); - if (unlikely(err)) - goto err_up; - - mod_timer(&adapter->watchdog_timer, jiffies); - atl1_irq_enable(adapter); - atl1_check_link(adapter); - return 0; - -err_up: - pci_disable_msi(adapter->pdev); - /* free rx_buffers */ - atl1_clean_rx_ring(adapter); - return err; -} - -void atl1_down(struct atl1_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_config_timer); - adapter->phy_timer_pending = false; - - atl1_irq_disable(adapter); - free_irq(adapter->pdev->irq, netdev); - pci_disable_msi(adapter->pdev); - atl1_reset_hw(&adapter->hw); - adapter->cmb.cmb->int_stats = 0; - - adapter->link_speed = SPEED_0; - adapter->link_duplex = -1; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); -} - -/* - * atl1_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - */ -static int atl1_open(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int err; - - /* allocate transmit descriptors */ - err = atl1_setup_ring_resources(adapter); - if (err) - return err; - - err = atl1_up(adapter); - if (err) - goto err_up; - - return 0; - -err_up: - atl1_reset(adapter); - return err; -} - -/* - * atl1_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - */ -static int atl1_close(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - atl1_down(adapter); - atl1_free_ring_resources(adapter); - return 0; -} - -#ifdef CONFIG_PM -static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u32 ctrl = 0; - u32 wufc = adapter->wol; - - netif_device_detach(netdev); - if (netif_running(netdev)) - atl1_down(adapter); - - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - if (ctrl & BMSR_LSTATUS) - wufc &= ~ATL1_WUFC_LNKC; - - /* reduce speed to 10/100M */ - if (wufc) { - atl1_phy_enter_power_saving(hw); - /* if resume, let driver to re- setup link */ - hw->phy_configured = false; - atl1_set_mac_addr(hw); - atl1_set_multi(netdev); - - ctrl = 0; - /* turn on magic packet wol */ - if (wufc & ATL1_WUFC_MAG) - ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; - - /* turn on Link change WOL */ - if (wufc & ATL1_WUFC_LNKC) - ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); - iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); - - /* turn on all-multi mode if wake on multicast is enabled */ - ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_DBG; - ctrl &= ~MAC_CTRL_PROMIS_EN; - if (wufc & ATL1_WUFC_MC) - ctrl |= MAC_CTRL_MC_ALL_EN; - else - ctrl &= ~MAC_CTRL_MC_ALL_EN; - - /* turn on broadcast mode if wake on-BC is enabled */ - if (wufc & ATL1_WUFC_BC) - ctrl |= MAC_CTRL_BC_EN; - else - ctrl &= ~MAC_CTRL_BC_EN; - - /* enable RX */ - ctrl |= MAC_CTRL_RX_EN; - iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - iowrite32(0, hw->hw_addr + REG_WOL_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - } - - pci_save_state(pdev); - pci_disable_device(pdev); - - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int atl1_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - u32 ret_val; - - pci_set_power_state(pdev, 0); - pci_restore_state(pdev); - - ret_val = pci_enable_device(pdev); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); - atl1_reset(adapter); - - if (netif_running(netdev)) - atl1_up(adapter); - netif_device_attach(netdev); - - atl1_via_workaround(adapter); - - return 0; -} -#else -#define atl1_suspend NULL -#define atl1_resume NULL -#endif - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void atl1_poll_controller(struct net_device *netdev) -{ - disable_irq(netdev->irq); - atl1_intr(netdev->irq, netdev); - enable_irq(netdev->irq); -} -#endif - -/* - * atl1_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in atl1_pci_tbl - * - * Returns 0 on success, negative on failure - * - * atl1_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - */ -static int __devinit atl1_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct atl1_adapter *adapter; - static int cards_found = 0; - int err; - - err = pci_enable_device(pdev); - if (err) - return err; - - /* - * The atl1 chip can DMA to 64-bit addresses, but it uses a single - * shared register for the high 32 bits, so only a single, aligned, - * 4 GB physical address range can be used at a time. - * - * Supporting 64-bit DMA on this hardware is more trouble than it's - * worth. It is far easier to limit to 32-bit DMA than update - * various kernel subsystems to support the mechanics required by a - * fixed-high-32-bit system. - */ - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_dma; - } - /* Mark all PCI regions associated with PCI device - * pdev as being reserved by owner atl1_driver_name - */ - err = pci_request_regions(pdev, atl1_driver_name); - if (err) - goto err_request_regions; - - /* Enables bus-mastering on the device and calls - * pcibios_set_master to do the needed arch specific settings - */ - pci_set_master(pdev); - - netdev = alloc_etherdev(sizeof(struct atl1_adapter)); - if (!netdev) { - err = -ENOMEM; - goto err_alloc_etherdev; - } - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - adapter->hw.back = adapter; - - adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); - if (!adapter->hw.hw_addr) { - err = -EIO; - goto err_pci_iomap; - } - /* get device revision number */ - adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + - (REG_MASTER_CTRL + 2)); - dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); - - /* set default ring resource counts */ - adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; - adapter->tpd_ring.count = ATL1_DEFAULT_TPD; - - adapter->mii.dev = netdev; - adapter->mii.mdio_read = mdio_read; - adapter->mii.mdio_write = mdio_write; - adapter->mii.phy_id_mask = 0x1f; - adapter->mii.reg_num_mask = 0x1f; - - netdev->open = &atl1_open; - netdev->stop = &atl1_close; - netdev->hard_start_xmit = &atl1_xmit_frame; - netdev->get_stats = &atl1_get_stats; - netdev->set_multicast_list = &atl1_set_multi; - netdev->set_mac_address = &atl1_set_mac; - netdev->change_mtu = &atl1_change_mtu; - netdev->do_ioctl = &atl1_ioctl; - netdev->tx_timeout = &atl1_tx_timeout; - netdev->watchdog_timeo = 5 * HZ; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = atl1_poll_controller; -#endif - netdev->vlan_rx_register = atl1_vlan_rx_register; - - netdev->ethtool_ops = &atl1_ethtool_ops; - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = atl1_sw_init(adapter); - if (err) - goto err_common; - - netdev->features = NETIF_F_HW_CSUM; - netdev->features |= NETIF_F_SG; - netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); - - /* - * FIXME - Until tso performance gets fixed, disable the feature. - * Enable it with ethtool -K if desired. - */ - /* netdev->features |= NETIF_F_TSO; */ - - netdev->features |= NETIF_F_LLTX; - - /* - * patch for some L1 of old version, - * the final version of L1 may not need these - * patches - */ - /* atl1_pcie_patch(adapter); */ - - /* really reset GPHY core */ - iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); - - /* - * reset the controller to - * put the device in a known good starting state - */ - if (atl1_reset_hw(&adapter->hw)) { - err = -EIO; - goto err_common; - } - - /* copy the MAC address out of the EEPROM */ - atl1_read_mac_addr(&adapter->hw); - memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->dev_addr)) { - err = -EIO; - goto err_common; - } - - atl1_check_options(adapter); - - /* pre-init the MAC, and setup link */ - err = atl1_init_hw(&adapter->hw); - if (err) { - err = -EIO; - goto err_common; - } - - atl1_pcie_patch(adapter); - /* assume we have no link for now */ - netif_carrier_off(netdev); - netif_stop_queue(netdev); - - init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = &atl1_watchdog; - adapter->watchdog_timer.data = (unsigned long)adapter; - - init_timer(&adapter->phy_config_timer); - adapter->phy_config_timer.function = &atl1_phy_config; - adapter->phy_config_timer.data = (unsigned long)adapter; - adapter->phy_timer_pending = false; - - INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); - - INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task); - - INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); - - err = register_netdev(netdev); - if (err) - goto err_common; - - cards_found++; - atl1_via_workaround(adapter); - return 0; - -err_common: - pci_iounmap(pdev, adapter->hw.hw_addr); -err_pci_iomap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_regions(pdev); -err_dma: -err_request_regions: - pci_disable_device(pdev); - return err; -} - -/* - * atl1_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * atl1_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - */ -static void __devexit atl1_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter; - /* Device not available. Return. */ - if (!netdev) - return; - - adapter = netdev_priv(netdev); - - /* Some atl1 boards lack persistent storage for their MAC, and get it - * from the BIOS during POST. If we've been messing with the MAC - * address, we need to save the permanent one. - */ - if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { - memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, - ETH_ALEN); - atl1_set_mac_addr(&adapter->hw); - } - - iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE); - unregister_netdev(netdev); - pci_iounmap(pdev, adapter->hw.hw_addr); - pci_release_regions(pdev); - free_netdev(netdev); - pci_disable_device(pdev); -} - -static struct pci_driver atl1_driver = { - .name = atl1_driver_name, - .id_table = atl1_pci_tbl, - .probe = atl1_probe, - .remove = __devexit_p(atl1_remove), - .suspend = atl1_suspend, - .resume = atl1_resume -}; - -/* - * atl1_exit_module - Driver Exit Cleanup Routine - * - * atl1_exit_module is called just before the driver is removed - * from memory. - */ -static void __exit atl1_exit_module(void) -{ - pci_unregister_driver(&atl1_driver); -} - -/* - * atl1_init_module - Driver Registration Routine - * - * atl1_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - */ -static int __init atl1_init_module(void) -{ - return pci_register_driver(&atl1_driver); -} - -module_init(atl1_init_module); -module_exit(atl1_exit_module); diff --git a/drivers/net/atlx/atl1_param.c b/drivers/net/atlx/atl1_param.c deleted file mode 100644 index 4246bb9..0000000 --- a/drivers/net/atlx/atl1_param.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook - * Copyright(c) 2006 Jay Cliburn - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include "atl1.h" - -/* - * This is the only thing that needs to be changed to adjust the - * maximum number of ports that the driver can manage. - */ -#define ATL1_MAX_NIC 4 - -#define OPTION_UNSET -1 -#define OPTION_DISABLED 0 -#define OPTION_ENABLED 1 - -#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } - -/* - * Interrupt Moderate Timer in units of 2 us - * - * Valid Range: 10-65535 - * - * Default Value: 100 (200us) - */ -static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; -static int num_int_mod_timer = 0; -module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0); -MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); - -/* - * flash_vendor - * - * Valid Range: 0-2 - * - * 0 - Atmel - * 1 - SST - * 2 - ST - * - * Default Value: 0 - */ -static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; -static int num_flash_vendor = 0; -module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0); -MODULE_PARM_DESC(flash_vendor, "SPI flash vendor"); - -#define DEFAULT_INT_MOD_CNT 100 /* 200us */ -#define MAX_INT_MOD_CNT 65000 -#define MIN_INT_MOD_CNT 50 - -#define FLASH_VENDOR_DEFAULT 0 -#define FLASH_VENDOR_MIN 0 -#define FLASH_VENDOR_MAX 2 - -struct atl1_option { - enum { enable_option, range_option, list_option } type; - char *name; - char *err; - int def; - union { - struct { /* range_option info */ - int min; - int max; - } r; - struct { /* list_option info */ - int nr; - struct atl1_opt_list { - int i; - char *str; - } *p; - } l; - } arg; -}; - -static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev) -{ - if (*value == OPTION_UNSET) { - *value = opt->def; - return 0; - } - - switch (opt->type) { - case enable_option: - switch (*value) { - case OPTION_ENABLED: - dev_info(&pdev->dev, "%s enabled\n", opt->name); - return 0; - case OPTION_DISABLED: - dev_info(&pdev->dev, "%s disabled\n", opt->name); - return 0; - } - break; - case range_option: - if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - dev_info(&pdev->dev, "%s set to %i\n", opt->name, - *value); - return 0; - } - break; - case list_option:{ - int i; - struct atl1_opt_list *ent; - - for (i = 0; i < opt->arg.l.nr; i++) { - ent = &opt->arg.l.p[i]; - if (*value == ent->i) { - if (ent->str[0] != '\0') - dev_info(&pdev->dev, "%s\n", - ent->str); - return 0; - } - } - } - break; - - default: - break; - } - - dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", - opt->name, *value, opt->err); - *value = opt->def; - return -1; -} - -/* - * atl1_check_options - Range Checking for Command Line Parameters - * @adapter: board private structure - * - * This routine checks all command line parameters for valid user - * input. If an invalid value is given, or if no user specified - * value exists, a default value is used. The final value is stored - * in a variable in the adapter structure. - */ -void __devinit atl1_check_options(struct atl1_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int bd = adapter->bd_number; - if (bd >= ATL1_MAX_NIC) { - dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); - dev_notice(&pdev->dev, "using defaults for all values\n"); - } - { /* Interrupt Moderate Timer */ - struct atl1_option opt = { - .type = range_option, - .name = "Interrupt Moderator Timer", - .err = "using default of " - __MODULE_STRING(DEFAULT_INT_MOD_CNT), - .def = DEFAULT_INT_MOD_CNT, - .arg = {.r = - {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}} - }; - int val; - if (num_int_mod_timer > bd) { - val = int_mod_timer[bd]; - atl1_validate_option(&val, &opt, pdev); - adapter->imt = (u16) val; - } else - adapter->imt = (u16) (opt.def); - } - - { /* Flash Vendor */ - struct atl1_option opt = { - .type = range_option, - .name = "SPI Flash Vendor", - .err = "using default of " - __MODULE_STRING(FLASH_VENDOR_DEFAULT), - .def = DEFAULT_INT_MOD_CNT, - .arg = {.r = - {.min = FLASH_VENDOR_MIN,.max = - FLASH_VENDOR_MAX}} - }; - int val; - if (num_flash_vendor > bd) { - val = flash_vendor[bd]; - atl1_validate_option(&val, &opt, pdev); - adapter->hw.flash_vendor = (u8) val; - } else - adapter->hw.flash_vendor = (u8) (opt.def); - } -} diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c new file mode 100644 index 0000000..4186326 --- /dev/null +++ b/drivers/net/atlx/atlx.c @@ -0,0 +1,433 @@ +/* atlx.c -- common functions for Attansic network drivers + * + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 - 2007 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* Including this file like a header is a temporary hack, I promise. -- CHS */ +#ifndef ATLX_C +#define ATLX_C + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "atlx.h" + +static struct atlx_spi_flash_dev flash_table[] = { +/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */ + {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, + {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, + {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, +}; + +static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atlx_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +/* + * atlx_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atlx_set_mac(struct net_device *netdev, void *p) +{ + struct atlx_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (netif_running(netdev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atlx_set_mac_addr(&adapter->hw); + return 0; +} + +static void atlx_check_for_link(struct atlx_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + u16 phy_data = 0; + + spin_lock(&adapter->lock); + adapter->phy_timer_pending = false; + atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->lock); + + /* notify upper layer link down ASAP */ + if (!(phy_data & BMSR_LSTATUS)) { + /* Link Down */ + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + dev_info(&adapter->pdev->dev, "%s link is down\n", + netdev->name); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } + schedule_work(&adapter->link_chg_task); +} + +/* + * atlx_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atlx_set_multi(struct net_device *netdev) +{ + struct atlx_adapter *adapter = netdev_priv(netdev); + struct atlx_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u32 rctl; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); + if (netdev->flags & IFF_PROMISC) + rctl |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) { + rctl |= MAC_CTRL_MC_ALL_EN; + rctl &= ~MAC_CTRL_PROMIS_EN; + } else + rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + + iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); + + /* clear the old settings from the multicast hash table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + /* compute mc addresses' hash value ,and put it into hash table */ + for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { + hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr); + atlx_hash_set(hw, hash_value); + } +} + +/* + * atlx_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static void atlx_irq_enable(struct atlx_adapter *adapter) +{ + iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); + ioread32(adapter->hw.hw_addr + REG_IMR); +} + +/* + * atlx_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static void atlx_irq_disable(struct atlx_adapter *adapter) +{ + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + ioread32(adapter->hw.hw_addr + REG_IMR); + synchronize_irq(adapter->pdev->irq); +} + +static void atlx_clear_phy_int(struct atlx_adapter *adapter) +{ + u16 phy_data; + unsigned long flags; + + spin_lock_irqsave(&adapter->lock, flags); + atlx_read_phy_reg(&adapter->hw, 19, &phy_data); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +/* + * atlx_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + */ +static struct net_device_stats *atlx_get_stats(struct net_device *netdev) +{ + struct atlx_adapter *adapter = netdev_priv(netdev); + return &adapter->net_stats; +} + +/* + * atlx_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atlx_tx_timeout(struct net_device *netdev) +{ + struct atlx_adapter *adapter = netdev_priv(netdev); + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->tx_timeout_task); +} + +/* + * atlx_link_chg_task - deal with link change event Out of interrupt context + */ +static void atlx_link_chg_task(struct work_struct *work) +{ + struct atlx_adapter *adapter; + unsigned long flags; + + adapter = container_of(work, struct atlx_adapter, link_chg_task); + + spin_lock_irqsave(&adapter->lock, flags); + atlx_check_link(adapter); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static void atlx_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct atlx_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + u32 ctrl; + + spin_lock_irqsave(&adapter->lock, flags); + /* atlx_irq_disable(adapter); FIXME: confirm/remove */ + adapter->vlgrp = grp; + + if (grp) { + /* enable VLAN tag insert/strip */ + ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); + ctrl |= MAC_CTRL_RMV_VLAN; + iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); + } else { + /* disable VLAN tag insert/strip */ + ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); + ctrl &= ~MAC_CTRL_RMV_VLAN; + iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); + } + + /* atlx_irq_enable(adapter); FIXME */ + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static void atlx_restore_vlan(struct atlx_adapter *adapter) +{ + atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp); +} + +/* + * This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ +#define ATL1_MAX_NIC 4 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET } + +/* + * Interrupt Moderate Timer in units of 2 us + * + * Valid Range: 10-65535 + * + * Default Value: 100 (200us) + */ +static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; +static int num_int_mod_timer; +module_param_array_named(int_mod_timer, int_mod_timer, int, + &num_int_mod_timer, 0); +MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer"); + +/* + * flash_vendor + * + * Valid Range: 0-2 + * + * 0 - Atmel + * 1 - SST + * 2 - ST + * + * Default Value: 0 + */ +static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT; +static int num_flash_vendor; +module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0); +MODULE_PARM_DESC(flash_vendor, "SPI flash vendor"); + +#define DEFAULT_INT_MOD_CNT 100 /* 200us */ +#define MAX_INT_MOD_CNT 65000 +#define MIN_INT_MOD_CNT 50 + +#define FLASH_VENDOR_DEFAULT 0 +#define FLASH_VENDOR_MIN 0 +#define FLASH_VENDOR_MAX 2 + +struct atl1_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl1_opt_list { + int i; + char *str; + } *p; + } l; + } arg; +}; + +static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, + struct pci_dev *pdev) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + dev_info(&pdev->dev, "%s enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + dev_info(&pdev->dev, "%s disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + dev_info(&pdev->dev, "%s set to %i\n", opt->name, + *value); + return 0; + } + break; + case list_option:{ + int i; + struct atl1_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + dev_info(&pdev->dev, "%s\n", + ent->str); + return 0; + } + } + } + break; + + default: + break; + } + + dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/* + * atl1_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +void __devinit atl1_check_options(struct atl1_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int bd = adapter->bd_number; + if (bd >= ATL1_MAX_NIC) { + dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); + dev_notice(&pdev->dev, "using defaults for all values\n"); + } + { /* Interrupt Moderate Timer */ + struct atl1_option opt = { + .type = range_option, + .name = "Interrupt Moderator Timer", + .err = "using default of " + __MODULE_STRING(DEFAULT_INT_MOD_CNT), + .def = DEFAULT_INT_MOD_CNT, + .arg = {.r = {.min = MIN_INT_MOD_CNT, + .max = MAX_INT_MOD_CNT} } + }; + int val; + if (num_int_mod_timer > bd) { + val = int_mod_timer[bd]; + atl1_validate_option(&val, &opt, pdev); + adapter->imt = (u16) val; + } else + adapter->imt = (u16) (opt.def); + } + + { /* Flash Vendor */ + struct atl1_option opt = { + .type = range_option, + .name = "SPI Flash Vendor", + .err = "using default of " + __MODULE_STRING(FLASH_VENDOR_DEFAULT), + .def = DEFAULT_INT_MOD_CNT, + .arg = {.r = {.min = FLASH_VENDOR_MIN, + .max = FLASH_VENDOR_MAX} } + }; + int val; + if (num_flash_vendor > bd) { + val = flash_vendor[bd]; + atl1_validate_option(&val, &opt, pdev); + adapter->hw.flash_vendor = (u8) val; + } else + adapter->hw.flash_vendor = (u8) (opt.def); + } +} + +#endif /* ATLX_C */ diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h new file mode 100644 index 0000000..3be7c09 --- /dev/null +++ b/drivers/net/atlx/atlx.h @@ -0,0 +1,506 @@ +/* atlx_hw.h -- common hardware definitions for Attansic network drivers + * + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 - 2007 Chris Snook + * Copyright(c) 2006 Jay Cliburn + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef ATLX_H +#define ATLX_H + +#include +#include + +#define ATLX_DRIVER_VERSION "2.1.1" +MODULE_AUTHOR("Xiong Huang , \ + Chris Snook , Jay Cliburn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATLX_DRIVER_VERSION); + +#define ATLX_ERR_PHY 2 +#define ATLX_ERR_PHY_SPEED 7 +#define ATLX_ERR_PHY_RES 8 + +#define SPEED_0 0xffff +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#define MEDIA_TYPE_AUTO_SENSOR 0 + +/* register definitions */ +#define REG_PM_CTRLSTAT 0x44 + +#define REG_PCIE_CAP_LIST 0x58 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xFF +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_SPI_FLASH_CTRL 0x200 +#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 +#define SPI_FLASH_CTRL_STS_WEN 0x2 +#define SPI_FLASH_CTRL_STS_WPEN 0x80 +#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF +#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 +#define SPI_FLASH_CTRL_INS_MASK 0x7 +#define SPI_FLASH_CTRL_INS_SHIFT 8 +#define SPI_FLASH_CTRL_START 0x800 +#define SPI_FLASH_CTRL_EN_VPD 0x2000 +#define SPI_FLASH_CTRL_LDSTART 0x8000 +#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 +#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 +#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 +#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 +#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 +#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 +#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 +#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 +#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 + +#define REG_SPI_ADDR 0x204 + +#define REG_SPI_DATA 0x208 + +#define REG_SPI_FLASH_CONFIG 0x20C +#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF +#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 +#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 +#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 +#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 + +#define REG_SPI_FLASH_OP_PROGRAM 0x210 +#define REG_SPI_FLASH_OP_SC_ERASE 0x211 +#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 +#define REG_SPI_FLASH_OP_RDID 0x213 +#define REG_SPI_FLASH_OP_WREN 0x214 +#define REG_SPI_FLASH_OP_RDSR 0x215 +#define REG_SPI_FLASH_OP_WRSR 0x216 +#define REG_SPI_FLASH_OP_READ 0x217 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */ +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 + +#define REG_PCIE_PHYMISC 0x1000 +#define PCIE_PHYMISC_FORCE_RCV_DET 0x4 + +#define REG_PCIE_DLL_TX_CTRL1 0x1104 +#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400 +#define PCIE_DLL_TX_CTRL1_DEF 0x568 + +#define REG_LTSSM_TEST_MODE 0x12FC +#define LTSSM_TEST_MODE_DEF 0x6500 + +/* Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_MTIMER_EN 0x2 +#define MASTER_CTRL_ITIMER_EN 0x4 +#define MASTER_CTRL_MANUAL_INT 0x8 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xFF +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0xFF + +/* Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + +/* IRQ Moderator Timer Initial Value Register */ +#define REG_IRQ_MODU_TIMER_INIT 0x1408 + +#define REG_PHY_ENABLE 0x140C + +/* IRQ Anti-Lost Timer Initial Value Register */ +#define REG_CMBDISDMA_TIMER 0x140E + +/* Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 + +/* MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xFFFF +#define MDIO_DATA_SHIFT 0 +#define MDIO_REG_ADDR_MASK 0x1F +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 +#define MDIO_SUP_PREAMBLE 0x400000 +#define MDIO_START 0x800000 +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 + +/* MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 + +/* BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141C +#define BIST0_NOW 0x1 +#define BIST0_SRAM_FAIL 0x2 +#define BIST0_FUSE_FLAG 0x4 +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 +#define BIST1_SRAM_FAIL 0x2 +#define BIST1_FUSE_FLAG 0x4 + +/* SerDes Lock Detect Control and Status Register */ +#define REG_SERDES_LOCK 0x1424 +#define SERDES_LOCK_DETECT 1 +#define SERDES_LOCK_DETECT_EN 2 + +/* MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 1 +#define MAC_CTRL_RX_EN 2 +#define MAC_CTRL_TX_FLOW 4 +#define MAC_CTRL_RX_FLOW 8 +#define MAC_CTRL_LOOPBACK 0x10 +#define MAC_CTRL_DUPLX 0x20 +#define MAC_CTRL_ADD_CRC 0x40 +#define MAC_CTRL_PAD 0x80 +#define MAC_CTRL_LENCHK 0x100 +#define MAC_CTRL_HUGE_EN 0x200 +#define MAC_CTRL_PRMLEN_SHIFT 10 +#define MAC_CTRL_PRMLEN_MASK 0xF +#define MAC_CTRL_RMV_VLAN 0x4000 +#define MAC_CTRL_PROMIS_EN 0x8000 +#define MAC_CTRL_MC_ALL_EN 0x2000000 +#define MAC_CTRL_BC_EN 0x4000000 + +/* MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 +#define MAC_IPG_IFG_IPGT_MASK 0x7F +#define MAC_IPG_IFG_MIFG_SHIFT 8 +#define MAC_IPG_IFG_MIFG_MASK 0xFF +#define MAC_IPG_IFG_IPGR1_SHIFT 16 +#define MAC_IPG_IFG_IPGR1_MASK 0x7F +#define MAC_IPG_IFG_IPGR2_SHIFT 24 +#define MAC_IPG_IFG_IPGR2_MASK 0x7F + +/* MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/* Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + +/* MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF + +/* Maximum Frame Length Control Register */ +#define REG_MTU 0x149C + +/* Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14A0 +#define WOL_PATTERN_EN 0x1 +#define WOL_PATTERN_PME_EN 0x2 +#define WOL_MAGIC_EN 0x4 +#define WOL_MAGIC_PME_EN 0x8 +#define WOL_LINK_CHG_EN 0x10 +#define WOL_LINK_CHG_PME_EN 0x20 +#define WOL_PATTERN_ST 0x100 +#define WOL_MAGIC_ST 0x200 +#define WOL_LINKCHG_ST 0x400 +#define WOL_PT0_EN 0x10000 +#define WOL_PT1_EN 0x20000 +#define WOL_PT2_EN 0x40000 +#define WOL_PT3_EN 0x80000 +#define WOL_PT4_EN 0x100000 +#define WOL_PT0_MATCH 0x1000000 +#define WOL_PT1_MATCH 0x2000000 +#define WOL_PT2_MATCH 0x4000000 +#define WOL_PT3_MATCH 0x8000000 +#define WOL_PT4_MATCH 0x10000000 + +/* Internal SRAM Partition Register, high 32 bits */ +#define REG_SRAM_RFD_ADDR 0x1500 + +/* Descriptor Control register, high 32 bits */ +#define REG_DESC_BASE_ADDR_HI 0x1540 + +/* Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_UR_DETECTED 0x1000000 +#define ISR_FERR_DETECTED 0x2000000 +#define ISR_NFERR_DETECTED 0x4000000 +#define ISR_CERR_DETECTED 0x8000000 +#define ISR_PHY_LINKDOWN 0x10000000 +#define ISR_DIS_INT 0x80000000 + +/* Interrupt Mask Register */ +#define REG_IMR 0x1604 + +#define REG_RFD_RRD_IDX 0x1800 +#define REG_TPD_IDX 0x1804 + +/* MII definitions */ + +/* PHY Common Register */ +#define MII_ATLX_CR 0x09 +#define MII_ATLX_SR 0x0A +#define MII_ATLX_ESR 0x0F +#define MII_ATLX_PSCR 0x10 +#define MII_ATLX_PSSR 0x11 + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, + * 00=10 + */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, + * 00=10 + */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_MASK 0x2040 +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Link partner ability register */ +#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ +#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ +#define MII_LPA_PAUSE 0x0400 /* PAUSE */ +#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ +#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ +#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ +#define MII_LPA_NPAGE 0x8000 /* Next page bit */ + +/* Autoneg Advertisement Register */ +#define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */ +#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ +#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */ +#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */ +#define MII_AR_SPEED_MASK 0x01E0 +#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 + +/* 1000BASE-T Control Register */ +#define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */ +#define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */ +#define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device, + * 0=DTE device */ +#define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master, + * 0=Configure PHY as Slave */ +#define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config, + * 0=Auto Master/Slave config + */ +#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */ +#define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */ +#define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */ +#define MII_ATLX_CR_1000T_SPEED_MASK 0x0300 +#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300 + +/* 1000BASE-T Status Register */ +#define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master + * 0=Slave + */ +#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config + * fault */ +#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 + +/* Extended Status Register */ +#define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +/* ATLX PHY Specific Control Register */ +#define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */ +#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */ +#define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008 +#define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low + * 0=CLK125 toggling + */ +#define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, + * Manual MDI configuration + */ +#define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover + * 100BASE-TX/10BASE-T: MDI + * Mode */ +#define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled + * all speeds. + */ +#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended + * 10BASE-T distance + * (Lower 10BASE-T RX + * Threshold) + * 0=Normal 10BASE-T RX + * Threshold + */ +#define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in + * 100BASE-TX + * 0=MII interface in + * 100BASE-TX + */ +#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */ +#define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ +#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1 +#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5 +#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 + +/* ATLX PHY Specific Status Register */ +#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +/* PCI Command Register Bit Definitions */ +#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ +#define CMD_IO_SPACE 0x0001 +#define CMD_MEMORY_SPACE 0x0002 +#define CMD_BUS_MASTER 0x0004 + +/* Wake Up Filter Control */ +#define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 +#define ADVERTISE_1000_FULL 0x0020 +#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ +#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ + +#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ +#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ + +/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */ +#define EEPROM_SUM 0xBABA +#define NODE_ADDRESS_SIZE 6 + +struct atlx_spi_flash_dev { + const char *manu_name; /* manufacturer id */ + /* op-code */ + u8 cmd_wrsr; + u8 cmd_read; + u8 cmd_program; + u8 cmd_wren; + u8 cmd_wrdi; + u8 cmd_rdsr; + u8 cmd_rdid; + u8 cmd_sector_erase; + u8 cmd_chip_erase; +}; + +#endif /* ATLX_H */ -- cgit v1.1 From 9d90fb1ac9d97da86e24d9ea947bf2a2f333829a Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:05 -0600 Subject: atl1: fix broken TSO The L1 tx packet descriptor expects TCP Header Length to be expressed as a number of 32-bit dwords. The atl1 driver uses tcp_hdrlen() to populate the field, but tcp_hdrlen() returns the header length in bytes, not in dwords. Add a shift to convert tcp_hdrlen() to dwords when we write it to the tpd. Also, some of our bit assignments are made to the wrong tpd words. Change those to the correct words. Finally, since all this fixes TSO, enable TSO by default. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index a84c97c..8a26dad 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -36,7 +36,6 @@ * A very incomplete list of things that need to be dealt with: * * TODO: - * Fix TSO; tx performance is horrible with TSO enabled. * Wake on LAN. * Add more ethtool functions. * Fix abstruse irq enable/disable condition described here: @@ -1308,8 +1307,8 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; tso->tsopl |= (iph->ihl & - CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT; - tso->tsopl |= (tcp_hdrlen(skb) & + TSO_PARAM_IPHL_MASK) << TSO_PARAM_IPHL_SHIFT; + tso->tsopl |= ((tcp_hdrlen(skb) >> 2) & TSO_PARAM_TCPHDRLEN_MASK) << TSO_PARAM_TCPHDRLEN_SHIFT; tso->tsopl |= (skb_shinfo(skb)->gso_size & @@ -1472,8 +1471,8 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, int count, tpd->desc.tso.tsopl = descr->tso.tsopl; tpd->buffer_addr = cpu_to_le64(buffer_info->dma); tpd->desc.data = descr->data; - tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) & - CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT; + tpd->desc.tso.tsopu |= (cpu_to_le16(buffer_info->length) & + TSO_PARAM_BUFLEN_MASK) << TSO_PARAM_BUFLEN_SHIFT; val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & TSO_PARAM_SEGMENT_MASK; @@ -1481,7 +1480,7 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, int count, tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; if (j == (count - 1)) - tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT; + tpd->desc.tso.tsopl |= 1 << TSO_PARAM_EOP_SHIFT; if (++tpd_next_to_use == tpd_ring->count) tpd_next_to_use = 0; @@ -1574,9 +1573,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) vlan_tag = vlan_tx_tag_get(skb); vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | ((vlan_tag >> 9) & 0x8); - param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT; - param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) << - CSUM_PARAM_VALAN_SHIFT; + param.tso.tsopl |= 1 << TSO_PARAM_INSVLAG_SHIFT; + param.tso.tsopu |= (vlan_tag & TSO_PARAM_VLANTAG_MASK) << + TSO_PARAM_VLAN_SHIFT; } tso = atl1_tso(adapter, skb, ¶m.tso); @@ -1595,8 +1594,8 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) } } - val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) & - CSUM_PARAM_SEGMENT_MASK; + val = (param.tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & + TSO_PARAM_SEGMENT_MASK; atl1_tx_map(adapter, skb, 1 == val); atl1_tx_queue(adapter, count, ¶m); netdev->trans_start = jiffies; @@ -2091,13 +2090,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev, netdev->features = NETIF_F_HW_CSUM; netdev->features |= NETIF_F_SG; netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); - - /* - * FIXME - Until tso performance gets fixed, disable the feature. - * Enable it with ethtool -K if desired. - */ - /* netdev->features |= NETIF_F_TSO; */ - + netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_LLTX; /* -- cgit v1.1 From c67c9a2f11d97a545c0e8f56b2ca3e5e36566a94 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:06 -0600 Subject: atl1: add ethtool register dump Add the ethtool register dump option to the atl1 driver. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/atlx/atl1.h | 1 + 2 files changed, 54 insertions(+) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 8a26dad..1f564f0 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2513,6 +2513,57 @@ static int atl1_set_wol(struct net_device *netdev, return 0; } +static int atl1_get_regs_len(struct net_device *netdev) +{ + return ATL1_REG_COUNT * sizeof(u32); +} + +static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, + void *p) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + unsigned int i; + u32 *regbuf = p; + + for (i = 0; i < ATL1_REG_COUNT; i++) { + /* + * This switch statement avoids reserved regions + * of register space. + */ + switch (i) { + case 6 ... 9: + case 14: + case 29 ... 31: + case 34 ... 63: + case 75 ... 127: + case 136 ... 1023: + case 1027 ... 1087: + case 1091 ... 1151: + case 1194 ... 1195: + case 1200 ... 1201: + case 1206 ... 1213: + case 1216 ... 1279: + case 1290 ... 1311: + case 1323 ... 1343: + case 1358 ... 1359: + case 1368 ... 1375: + case 1378 ... 1383: + case 1388 ... 1391: + case 1393 ... 1395: + case 1402 ... 1403: + case 1410 ... 1471: + case 1522 ... 1535: + /* reserved region; don't read it */ + regbuf[i] = 0; + break; + default: + /* unreserved region */ + regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); + } + } +} + static void atl1_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { @@ -2703,6 +2754,8 @@ const struct ethtool_ops atl1_ethtool_ops = { .get_drvinfo = atl1_get_drvinfo, .get_wol = atl1_get_wol, .set_wol = atl1_set_wol, + .get_regs_len = atl1_get_regs_len, + .get_regs = atl1_get_regs, .get_ringparam = atl1_get_ringparam, .set_ringparam = atl1_set_ringparam, .get_pauseparam = atl1_get_pauseparam, diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 538948d..30c5a8d 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -584,6 +584,7 @@ enum atl1_dma_req_block { #define ATL1_DEFAULT_RFD 512 #define ATL1_MIN_RFD 128 #define ATL1_MAX_RFD 2048 +#define ATL1_REG_COUNT 1538 #define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) #define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc) -- cgit v1.1 From 401c0aabec4b97320f962a0161a846d230a6f7aa Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:07 -0600 Subject: atl1: simplify tx packet descriptor The transmit packet descriptor consists of four 32-bit words, with word 3 upper bits overloaded depending upon the condition of its bits 3 and 4. The driver currently duplicates all word 2 and some word 3 register bit definitions unnecessarily and also uses a set of nested structures in its definition of the TPD without good cause. This patch adds a lengthy comment describing the TPD, eliminates duplicate TPD bit definitions, and simplifies the TPD structure itself. It also expands the TSO check to correctly handle custom checksum versus TSO processing using the revised TPD definitions. Finally, shorten some variable names in the transmit processing path to reduce line lengths, rename some variables to better describe their purpose (e.g., nseg versus m), and add a comment or two to better describe what the code is doing. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 265 ++++++++++++++++++++++++++---------------------- drivers/net/atlx/atl1.h | 201 ++++++++++++++++++------------------ 2 files changed, 246 insertions(+), 220 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 1f564f0..f4add3c 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1259,8 +1259,6 @@ static void atl1_intr_tx(struct atl1_adapter *adapter) dev_kfree_skb_irq(buffer_info->skb); buffer_info->skb = NULL; } - tpd->buffer_addr = 0; - tpd->desc.data = 0; if (++sw_tpd_next_to_clean == tpd_ring->count) sw_tpd_next_to_clean = 0; @@ -1282,48 +1280,69 @@ static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) } static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tso_param *tso) + struct tx_packet_desc *ptpd) { - /* We enter this function holding a spinlock. */ - u8 ipofst; + /* spinlock held */ + u8 hdr_len, ip_off; + u32 real_len; int err; if (skb_shinfo(skb)->gso_size) { if (skb_header_cloned(skb)) { err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); if (unlikely(err)) - return err; + return -1; } if (skb->protocol == ntohs(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); - iph->tot_len = 0; + real_len = (((unsigned char *)iph - skb->data) + + ntohs(iph->tot_len)); + if (real_len < skb->len) + pskb_trim(skb, real_len); + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (skb->len == hdr_len) { + iph->check = 0; + tcp_hdr(skb)->check = + ~csum_tcpudp_magic(iph->saddr, + iph->daddr, tcp_hdrlen(skb), + IPPROTO_TCP, 0); + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << + TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; + ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; + return 1; + } + iph->check = 0; tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, IPPROTO_TCP, 0); - ipofst = skb_network_offset(skb); - if (ipofst != ETH_HLEN) /* 802.3 frame */ - tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT; - - tso->tsopl |= (iph->ihl & - TSO_PARAM_IPHL_MASK) << TSO_PARAM_IPHL_SHIFT; - tso->tsopl |= ((tcp_hdrlen(skb) >> 2) & - TSO_PARAM_TCPHDRLEN_MASK) << - TSO_PARAM_TCPHDRLEN_SHIFT; - tso->tsopl |= (skb_shinfo(skb)->gso_size & - TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT; - tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT; - return true; + iph->daddr, 0, IPPROTO_TCP, 0); + ip_off = (unsigned char *)iph - + (unsigned char *) skb_network_header(skb); + if (ip_off == 8) /* 802.3-SNAP frame */ + ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; + else if (ip_off != 0) + return -2; + + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= (skb_shinfo(skb)->gso_size & + TPD_MSS_MASK) << TPD_MSS_SHIFT; + ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; + return 3; } } return false; } static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, - struct csum_param *csum) + struct tx_packet_desc *ptpd) { u8 css, cso; @@ -1335,115 +1354,116 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, "payload offset not an even number\n"); return -1; } - csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << - CSUM_PARAM_PLOADOFFSET_SHIFT; - csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) << - CSUM_PARAM_XSUMOFFSET_SHIFT; - csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT; + ptpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + ptpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) << + TPD_CCSUMOFFSET_SHIFT; + ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; return true; } - - return true; + return 0; } static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, - bool tcp_seg) + struct tx_packet_desc *ptpd) { - /* We enter this function holding a spinlock. */ + /* spinlock held */ struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; struct atl1_buffer *buffer_info; + u16 buf_len = skb->len; struct page *page; - int first_buf_len = skb->len; unsigned long offset; unsigned int nr_frags; unsigned int f; - u16 tpd_next_to_use; - u16 proto_hdr_len; - u16 len12; + int retval; + u16 next_to_use; + u16 data_len; + u8 hdr_len; - first_buf_len -= skb->data_len; + buf_len -= skb->data_len; nr_frags = skb_shinfo(skb)->nr_frags; - tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + next_to_use = atomic_read(&tpd_ring->next_to_use); + buffer_info = &tpd_ring->buffer_info[next_to_use]; if (unlikely(buffer_info->skb)) BUG(); /* put skb in last TPD */ buffer_info->skb = NULL; - if (tcp_seg) { - /* TSO/GSO */ - proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - buffer_info->length = proto_hdr_len; + retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; + if (retval) { + /* TSO */ + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + buffer_info->length = hdr_len; page = virt_to_page(skb->data); offset = (unsigned long)skb->data & ~PAGE_MASK; buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, proto_hdr_len, + offset, hdr_len, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; + if (++next_to_use == tpd_ring->count) + next_to_use = 0; - if (first_buf_len > proto_hdr_len) { - int i, m; + if (buf_len > hdr_len) { + int i, nseg; - len12 = first_buf_len - proto_hdr_len; - m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / + data_len = buf_len - hdr_len; + nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { + for (i = 0; i < nseg; i++) { buffer_info = - &tpd_ring->buffer_info[tpd_next_to_use]; + &tpd_ring->buffer_info[next_to_use]; buffer_info->skb = NULL; buffer_info->length = (ATL1_MAX_TX_BUF_LEN >= - len12) ? ATL1_MAX_TX_BUF_LEN : len12; - len12 -= buffer_info->length; + data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; + data_len -= buffer_info->length; page = virt_to_page(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)); + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); offset = (unsigned long)(skb->data + - (proto_hdr_len + - i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK; + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) & + ~PAGE_MASK; buffer_info->dma = pci_map_page(adapter->pdev, page, offset, buffer_info->length, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; + if (++next_to_use == tpd_ring->count) + next_to_use = 0; } } } else { - /* not TSO/GSO */ - buffer_info->length = first_buf_len; + /* not TSO */ + buffer_info->length = buf_len; page = virt_to_page(skb->data); offset = (unsigned long)skb->data & ~PAGE_MASK; buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, first_buf_len, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; + offset, buf_len, PCI_DMA_TODEVICE); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; } for (f = 0; f < nr_frags; f++) { struct skb_frag_struct *frag; - u16 lenf, i, m; + u16 i, nseg; frag = &skb_shinfo(skb)->frags[f]; - lenf = frag->size; + buf_len = frag->size; - m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < m; i++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; + nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < nseg; i++) { + buffer_info = &tpd_ring->buffer_info[next_to_use]; if (unlikely(buffer_info->skb)) BUG(); buffer_info->skb = NULL; - buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ? - ATL1_MAX_TX_BUF_LEN : lenf; - lenf -= buffer_info->length; + buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? + ATL1_MAX_TX_BUF_LEN : buf_len; + buf_len -= buffer_info->length; buffer_info->dma = pci_map_page(adapter->pdev, frag->page, frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), buffer_info->length, PCI_DMA_TODEVICE); - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; + if (++next_to_use == tpd_ring->count) + next_to_use = 0; } } @@ -1451,39 +1471,44 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, buffer_info->skb = skb; } -static void atl1_tx_queue(struct atl1_adapter *adapter, int count, - union tpd_descr *descr) +static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, + struct tx_packet_desc *ptpd) { - /* We enter this function holding a spinlock. */ + /* spinlock held */ struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - int j; - u32 val; struct atl1_buffer *buffer_info; struct tx_packet_desc *tpd; - u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use); + u16 j; + u32 val; + u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); for (j = 0; j < count; j++) { - buffer_info = &tpd_ring->buffer_info[tpd_next_to_use]; - tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use); - tpd->desc.csum.csumpu = descr->csum.csumpu; - tpd->desc.csum.csumpl = descr->csum.csumpl; - tpd->desc.tso.tsopu = descr->tso.tsopu; - tpd->desc.tso.tsopl = descr->tso.tsopl; + buffer_info = &tpd_ring->buffer_info[next_to_use]; + tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); + if (tpd != ptpd) + memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->desc.data = descr->data; - tpd->desc.tso.tsopu |= (cpu_to_le16(buffer_info->length) & - TSO_PARAM_BUFLEN_MASK) << TSO_PARAM_BUFLEN_SHIFT; + tpd->word2 = (cpu_to_le16(buffer_info->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; - val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & - TSO_PARAM_SEGMENT_MASK; - if (val && !j) - tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT; + /* + * if this is the first packet in a TSO chain, set + * TPD_HDRFLAG, otherwise, clear it. + */ + val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & + TPD_SEGMENT_EN_MASK; + if (val) { + if (!j) + tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; + else + tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); + } if (j == (count - 1)) - tpd->desc.tso.tsopl |= 1 << TSO_PARAM_EOP_SHIFT; + tpd->word3 |= 1 << TPD_EOP_SHIFT; - if (++tpd_next_to_use == tpd_ring->count) - tpd_next_to_use = 0; + if (++next_to_use == tpd_ring->count) + next_to_use = 0; } /* * Force memory writes to complete before letting h/w @@ -1493,18 +1518,18 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, int count, */ wmb(); - atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use); + atomic_set(&tpd_ring->next_to_use, next_to_use); } static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; int len = skb->len; int tso; int count = 1; int ret_val; - u32 val; - union tpd_descr param; + struct tx_packet_desc *ptpd; u16 frag_size; u16 vlan_tag; unsigned long flags; @@ -1515,18 +1540,11 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) len -= skb->data_len; - if (unlikely(skb->len == 0)) { + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } - param.data = 0; - param.tso.tsopu = 0; - param.tso.tsopl = 0; - param.csum.csumpu = 0; - param.csum.csumpl = 0; - - /* nr_frags will be nonzero if we're doing scatter/gather (SG) */ nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) { frag_size = skb_shinfo(skb)->frags[f].size; @@ -1535,10 +1553,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ATL1_MAX_TX_BUF_LEN; } - /* mss will be nonzero if we're doing segment offload (TSO/GSO) */ mss = skb_shinfo(skb)->gso_size; if (mss) { - if (skb->protocol == htons(ETH_P_IP)) { + if (skb->protocol == ntohs(ETH_P_IP)) { proto_hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); if (unlikely(proto_hdr_len > len)) { @@ -1567,18 +1584,20 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_BUSY; } - param.data = 0; + ptpd = ATL1_TPD_DESC(tpd_ring, + (u16) atomic_read(&tpd_ring->next_to_use)); + memset(ptpd, 0, sizeof(struct tx_packet_desc)); if (adapter->vlgrp && vlan_tx_tag_present(skb)) { vlan_tag = vlan_tx_tag_get(skb); vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | ((vlan_tag >> 9) & 0x8); - param.tso.tsopl |= 1 << TSO_PARAM_INSVLAG_SHIFT; - param.tso.tsopu |= (vlan_tag & TSO_PARAM_VLANTAG_MASK) << - TSO_PARAM_VLAN_SHIFT; + ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; + ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << + TPD_VL_TAGGED_SHIFT; } - tso = atl1_tso(adapter, skb, ¶m.tso); + tso = atl1_tso(adapter, skb, ptpd); if (tso < 0) { spin_unlock_irqrestore(&adapter->lock, flags); dev_kfree_skb_any(skb); @@ -1586,7 +1605,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) } if (!tso) { - ret_val = atl1_tx_csum(adapter, skb, ¶m.csum); + ret_val = atl1_tx_csum(adapter, skb, ptpd); if (ret_val < 0) { spin_unlock_irqrestore(&adapter->lock, flags); dev_kfree_skb_any(skb); @@ -1594,13 +1613,11 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) } } - val = (param.tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) & - TSO_PARAM_SEGMENT_MASK; - atl1_tx_map(adapter, skb, 1 == val); - atl1_tx_queue(adapter, count, ¶m); - netdev->trans_start = jiffies; - spin_unlock_irqrestore(&adapter->lock, flags); + atl1_tx_map(adapter, skb, ptpd); + atl1_tx_queue(adapter, count, ptpd); atl1_update_mailbox(adapter); + spin_unlock_irqrestore(&adapter->lock, flags); + netdev->trans_start = jiffies; return NETDEV_TX_OK; } @@ -2759,7 +2776,7 @@ const struct ethtool_ops atl1_ethtool_ops = { .get_ringparam = atl1_get_ringparam, .set_ringparam = atl1_set_ringparam, .get_pauseparam = atl1_get_pauseparam, - .set_pauseparam = atl1_set_pauseparam, + .set_pauseparam = atl1_set_pauseparam, .get_rx_csum = atl1_get_rx_csum, .set_tx_csum = ethtool_op_set_tx_hw_csum, .get_link = ethtool_op_get_link, diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 30c5a8d..4d3d65b 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -452,106 +452,115 @@ struct rx_free_desc { /* __attribute__ ((packed)) is required */ } __attribute__ ((packed)); -/* tsopu defines */ -#define TSO_PARAM_BUFLEN_MASK 0x3FFF -#define TSO_PARAM_BUFLEN_SHIFT 0 -#define TSO_PARAM_DMAINT_MASK 0x0001 -#define TSO_PARAM_DMAINT_SHIFT 14 -#define TSO_PARAM_PKTNT_MASK 0x0001 -#define TSO_PARAM_PKTINT_SHIFT 15 -#define TSO_PARAM_VLANTAG_MASK 0xFFFF -#define TSO_PARAM_VLAN_SHIFT 16 - -/* tsopl defines */ -#define TSO_PARAM_EOP_MASK 0x0001 -#define TSO_PARAM_EOP_SHIFT 0 -#define TSO_PARAM_COALESCE_MASK 0x0001 -#define TSO_PARAM_COALESCE_SHIFT 1 -#define TSO_PARAM_INSVLAG_MASK 0x0001 -#define TSO_PARAM_INSVLAG_SHIFT 2 -#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3 -#define TSO_PARAM_SEGMENT_MASK 0x0001 -#define TSO_PARAM_SEGMENT_SHIFT 4 -#define TSO_PARAM_IPCKSUM_MASK 0x0001 -#define TSO_PARAM_IPCKSUM_SHIFT 5 -#define TSO_PARAM_TCPCKSUM_MASK 0x0001 -#define TSO_PARAM_TCPCKSUM_SHIFT 6 -#define TSO_PARAM_UDPCKSUM_MASK 0x0001 -#define TSO_PARAM_UDPCKSUM_SHIFT 7 -#define TSO_PARAM_VLANTAGGED_MASK 0x0001 -#define TSO_PARAM_VLANTAGGED_SHIFT 8 -#define TSO_PARAM_ETHTYPE_MASK 0x0001 -#define TSO_PARAM_ETHTYPE_SHIFT 9 -#define TSO_PARAM_IPHL_MASK 0x000F -#define TSO_PARAM_IPHL_SHIFT 10 -#define TSO_PARAM_TCPHDRLEN_MASK 0x000F -#define TSO_PARAM_TCPHDRLEN_SHIFT 14 -#define TSO_PARAM_HDRFLAG_MASK 0x0001 -#define TSO_PARAM_HDRFLAG_SHIFT 18 -#define TSO_PARAM_MSS_MASK 0x1FFF -#define TSO_PARAM_MSS_SHIFT 19 - -/* csumpu defines */ -#define CSUM_PARAM_BUFLEN_MASK 0x3FFF -#define CSUM_PARAM_BUFLEN_SHIFT 0 -#define CSUM_PARAM_DMAINT_MASK 0x0001 -#define CSUM_PARAM_DMAINT_SHIFT 14 -#define CSUM_PARAM_PKTINT_MASK 0x0001 -#define CSUM_PARAM_PKTINT_SHIFT 15 -#define CSUM_PARAM_VALANTAG_MASK 0xFFFF -#define CSUM_PARAM_VALAN_SHIFT 16 - -/* csumpl defines*/ -#define CSUM_PARAM_EOP_MASK 0x0001 -#define CSUM_PARAM_EOP_SHIFT 0 -#define CSUM_PARAM_COALESCE_MASK 0x0001 -#define CSUM_PARAM_COALESCE_SHIFT 1 -#define CSUM_PARAM_INSVLAG_MASK 0x0001 -#define CSUM_PARAM_INSVLAG_SHIFT 2 -#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001 -#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3 -#define CSUM_PARAM_SEGMENT_MASK 0x0001 -#define CSUM_PARAM_SEGMENT_SHIFT 4 -#define CSUM_PARAM_IPCKSUM_MASK 0x0001 -#define CSUM_PARAM_IPCKSUM_SHIFT 5 -#define CSUM_PARAM_TCPCKSUM_MASK 0x0001 -#define CSUM_PARAM_TCPCKSUM_SHIFT 6 -#define CSUM_PARAM_UDPCKSUM_MASK 0x0001 -#define CSUM_PARAM_UDPCKSUM_SHIFT 7 -#define CSUM_PARAM_VLANTAGGED_MASK 0x0001 -#define CSUM_PARAM_VLANTAGGED_SHIFT 8 -#define CSUM_PARAM_ETHTYPE_MASK 0x0001 -#define CSUM_PARAM_ETHTYPE_SHIFT 9 -#define CSUM_PARAM_IPHL_MASK 0x000F -#define CSUM_PARAM_IPHL_SHIFT 10 -#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF -#define CSUM_PARAM_PLOADOFFSET_SHIFT 16 -#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF -#define CSUM_PARAM_XSUMOFFSET_SHIFT 24 - -/* TPD descriptor */ -struct tso_param { - /* The order of these declarations is important -- don't change it */ - u32 tsopu; /* tso_param upper word */ - u32 tsopl; /* tso_param lower word */ -}; - -struct csum_param { - /* The order of these declarations is important -- don't change it */ - u32 csumpu; /* csum_param upper word */ - u32 csumpl; /* csum_param lower word */ -}; +/* + * The L1 transmit packet descriptor is comprised of four 32-bit words. + * + * 31 0 + * +---------------------------------------+ + * | Word 0: Buffer addr lo | + * +---------------------------------------+ + * | Word 1: Buffer addr hi | + * +---------------------------------------+ + * | Word 2 | + * +---------------------------------------+ + * | Word 3 | + * +---------------------------------------+ + * + * Words 0 and 1 combine to form a 64-bit buffer address. + * + * Word 2 is self explanatory in the #define block below. + * + * Word 3 has two forms, depending upon the state of bits 3 and 4. + * If bits 3 and 4 are both zero, then bits 14:31 are unused by the + * hardware. Otherwise, if either bit 3 or 4 is set, the definition + * of bits 14:31 vary according to the following depiction. + * + * 0 End of packet 0 End of packet + * 1 Coalesce 1 Coalesce + * 2 Insert VLAN tag 2 Insert VLAN tag + * 3 Custom csum enable = 0 3 Custom csum enable = 1 + * 4 Segment enable = 1 4 Segment enable = 0 + * 5 Generate IP checksum 5 Generate IP checksum + * 6 Generate TCP checksum 6 Generate TCP checksum + * 7 Generate UDP checksum 7 Generate UDP checksum + * 8 VLAN tagged 8 VLAN tagged + * 9 Ethernet frame type 9 Ethernet frame type + * 10-+ 10-+ + * 11 | IP hdr length (10:13) 11 | IP hdr length (10:13) + * 12 | (num 32-bit words) 12 | (num 32-bit words) + * 13-+ 13-+ + * 14-+ 14 Unused + * 15 | TCP hdr length (14:17) 15 Unused + * 16 | (num 32-bit words) 16-+ + * 17-+ 17 | + * 18 Header TPD flag 18 | + * 19-+ 19 | Payload offset + * 20 | 20 | (16:23) + * 21 | 21 | + * 22 | 22 | + * 23 | 23-+ + * 24 | 24-+ + * 25 | MSS (19:31) 25 | + * 26 | 26 | + * 27 | 27 | Custom csum offset + * 28 | 28 | (24:31) + * 29 | 29 | + * 30 | 30 | + * 31-+ 31-+ + */ -union tpd_descr { - u64 data; - struct csum_param csum; - struct tso_param tso; -}; +/* tpd word 2 */ +#define TPD_BUFLEN_MASK 0x3FFF +#define TPD_BUFLEN_SHIFT 0 +#define TPD_DMAINT_MASK 0x0001 +#define TPD_DMAINT_SHIFT 14 +#define TPD_PKTNT_MASK 0x0001 +#define TPD_PKTINT_SHIFT 15 +#define TPD_VLANTAG_MASK 0xFFFF +#define TPD_VLAN_SHIFT 16 + +/* tpd word 3 bits 0:13 */ +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 0 +#define TPD_COALESCE_MASK 0x0001 +#define TPD_COALESCE_SHIFT 1 +#define TPD_INS_VL_TAG_MASK 0x0001 +#define TPD_INS_VL_TAG_SHIFT 2 +#define TPD_CUST_CSUM_EN_MASK 0x0001 +#define TPD_CUST_CSUM_EN_SHIFT 3 +#define TPD_SEGMENT_EN_MASK 0x0001 +#define TPD_SEGMENT_EN_SHIFT 4 +#define TPD_IP_CSUM_MASK 0x0001 +#define TPD_IP_CSUM_SHIFT 5 +#define TPD_TCP_CSUM_MASK 0x0001 +#define TPD_TCP_CSUM_SHIFT 6 +#define TPD_UDP_CSUM_MASK 0x0001 +#define TPD_UDP_CSUM_SHIFT 7 +#define TPD_VL_TAGGED_MASK 0x0001 +#define TPD_VL_TAGGED_SHIFT 8 +#define TPD_ETHTYPE_MASK 0x0001 +#define TPD_ETHTYPE_SHIFT 9 +#define TPD_IPHL_MASK 0x000F +#define TPD_IPHL_SHIFT 10 + +/* tpd word 3 bits 14:31 if segment enabled */ +#define TPD_TCPHDRLEN_MASK 0x000F +#define TPD_TCPHDRLEN_SHIFT 14 +#define TPD_HDRFLAG_MASK 0x0001 +#define TPD_HDRFLAG_SHIFT 18 +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 19 + +/* tpd word 3 bits 16:31 if custom csum enabled */ +#define TPD_PLOADOFFSET_MASK 0x00FF +#define TPD_PLOADOFFSET_SHIFT 16 +#define TPD_CCSUMOFFSET_MASK 0x00FF +#define TPD_CCSUMOFFSET_SHIFT 24 struct tx_packet_desc { __le64 buffer_addr; - union tpd_descr desc; + __le32 word2; + __le32 word3; }; /* DMA Order Settings */ -- cgit v1.1 From 5ca3bc3041b1cbbb3361a99bd666e907850a1a7a Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:08 -0600 Subject: atl1: use csum_start Use skb->csum_start for tx checksum offload preparation. Also swap the variables css and cso so they hold the intended values of csum start and offset, respectively. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index f4add3c..9929822 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1347,16 +1347,17 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, u8 css, cso; if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - cso = skb_transport_offset(skb); - css = cso + skb->csum_offset; - if (unlikely(cso & 0x1)) { + css = (u8) (skb->csum_start - skb_headroom(skb)); + cso = css + (u8) skb->csum_offset; + if (unlikely(css & 0x1)) { + /* L1 hardware requires an even number here */ dev_printk(KERN_DEBUG, &adapter->pdev->dev, "payload offset not an even number\n"); return -1; } - ptpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) << + ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << TPD_PLOADOFFSET_SHIFT; - ptpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) << + ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << TPD_CCSUMOFFSET_SHIFT; ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; return true; -- cgit v1.1 From 460578bfe4dffbdc6eec9fcbd0fe0bb4f9f82188 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:09 -0600 Subject: atl1: use netif_msg Use netif_msg_* for console messages emitted by the driver. Add a parameter to allow control of messaging at driver startup, and also add the ability to control it with ethtool. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 155 ++++++++++++++++++++++++++++++++++-------------- drivers/net/atlx/atl1.h | 2 +- 2 files changed, 111 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 9929822..51eca23 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -100,6 +100,13 @@ static const struct pci_device_id atl1_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, atl1_pci_tbl); +static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; + +static int debug = -1; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); + /* * atl1_sw_init - Initialize general software structures (struct atl1_adapter) * @adapter: board private structure to initialize @@ -217,7 +224,9 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); if (unlikely(!tpd_ring->buffer_info)) { - dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", + size); goto err_nomem; } rfd_ring->buffer_info = @@ -239,7 +248,8 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, &ring_header->dma); if (unlikely(!ring_header->desc)) { - dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); goto err_nomem; } @@ -472,7 +482,8 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) /* link down */ if (netif_carrier_ok(netdev)) { /* old link state: Up */ - dev_info(&adapter->pdev->dev, "link is down\n"); + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, "link is down\n"); adapter->link_speed = SPEED_0; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -515,11 +526,12 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) adapter->link_speed = speed; adapter->link_duplex = duplex; atl1_setup_mac_ctrl(adapter); - dev_info(&adapter->pdev->dev, - "%s link is up %d Mbps %s\n", - netdev->name, adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "full duplex" : "half duplex"); + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); } if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ @@ -583,7 +595,8 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); return -EINVAL; } @@ -997,8 +1010,9 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | ERR_FLAG_CODE | ERR_FLAG_OV)) { adapter->hw_csum_err++; - dev_printk(KERN_DEBUG, &pdev->dev, - "rx checksum error\n"); + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "rx checksum error\n"); return; } } @@ -1017,9 +1031,10 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, } /* IPv4, but hardware thinks its checksum is wrong */ - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); adapter->hw_csum_err++; @@ -1133,14 +1148,17 @@ chk_rrd: /* rrd seems to be bad */ if (unlikely(i-- > 0)) { /* rrd may not be DMAed completely */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "incomplete RRD DMA transfer\n"); + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, + &adapter->pdev->dev, + "unexpected RRD count\n"); udelay(1); goto chk_rrd; } /* bad rrd */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "bad RRD\n"); + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "bad RRD\n"); /* see if update RFD index */ if (rrd->num_buf > 1) atl1_update_rfd_index(adapter, rrd); @@ -1351,8 +1369,9 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, cso = css + (u8) skb->csum_offset; if (unlikely(css & 0x1)) { /* L1 hardware requires an even number here */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "payload offset not an even number\n"); + if (netif_msg_tx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "payload offset not an even number\n"); return -1; } ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << @@ -1573,7 +1592,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (!spin_trylock_irqsave(&adapter->lock, flags)) { /* Can't get lock - tell upper layer to requeue */ - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n"); + if (netif_msg_tx_queued(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "tx locked\n"); return NETDEV_TX_LOCKED; } @@ -1581,7 +1602,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* not enough descriptors */ netif_stop_queue(netdev); spin_unlock_irqrestore(&adapter->lock, flags); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n"); + if (netif_msg_tx_queued(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "tx busy\n"); return NETDEV_TX_BUSY; } @@ -1657,8 +1680,9 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if PCIE PHY Link down */ if (status & ISR_PHY_LINKDOWN) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie phy link down %x\n", status); + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie phy link down %x\n", status); if (netif_running(adapter->netdev)) { /* reset MAC */ iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); @@ -1668,9 +1692,10 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if DMA read/write error ? */ if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie DMA r/w error (status = 0x%x)\n", - status); + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); return IRQ_HANDLED; @@ -1693,8 +1718,11 @@ static irqreturn_t atl1_intr(int irq, void *data) if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV | ISR_HOST_RFD_UNRUN | ISR_HOST_RRD_OV)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "rx exception, ISR = 0x%x\n", status); + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, + &adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", + status); atl1_intr_rx(adapter); } @@ -1791,8 +1819,9 @@ s32 atl1_up(struct atl1_adapter *adapter) err = pci_enable_msi(adapter->pdev); if (err) { - dev_info(&adapter->pdev->dev, - "Unable to enable MSI: %d\n", err); + if (netif_msg_ifup(adapter)) + dev_info(&adapter->pdev->dev, + "Unable to enable MSI: %d\n", err); irq_flags |= IRQF_SHARED; } @@ -2061,6 +2090,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev, adapter->netdev = netdev; adapter->pdev = pdev; adapter->hw.back = adapter; + adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); if (!adapter->hw.hw_addr) { @@ -2070,7 +2100,8 @@ static int __devinit atl1_probe(struct pci_dev *pdev, /* get device revision number */ adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + (REG_MASTER_CTRL + 2)); - dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); + if (netif_msg_probe(adapter)) + dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); /* set default ring resource counts */ adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; @@ -2390,7 +2421,9 @@ static int atl1_set_settings(struct net_device *netdev, u16 old_media_type = hw->media_type; if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool shutting down adapter\n"); atl1_down(adapter); } @@ -2399,8 +2432,9 @@ static int atl1_set_settings(struct net_device *netdev, else { if (ecmd->speed == SPEED_1000) { if (ecmd->duplex != DUPLEX_FULL) { - dev_warn(&adapter->pdev->dev, - "can't force to 1000M half duplex\n"); + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "1000M half is invalid\n"); ret_val = -EINVAL; goto exit_sset; } @@ -2438,8 +2472,9 @@ static int atl1_set_settings(struct net_device *netdev, } if (atl1_phy_setup_autoneg_adv(hw)) { ret_val = -EINVAL; - dev_warn(&adapter->pdev->dev, - "invalid ethtool speed/duplex setting\n"); + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); goto exit_sset; } if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || @@ -2471,10 +2506,14 @@ exit_sset: hw->media_type = old_media_type; if (netif_running(adapter->netdev)) { - dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool starting adapter\n"); atl1_up(adapter); } else if (!ret_val) { - dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool resetting adapter\n"); atl1_reset(adapter); } return ret_val; @@ -2531,6 +2570,18 @@ static int atl1_set_wol(struct net_device *netdev, return 0; } +static u32 atl1_get_msglevel(struct net_device *netdev) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void atl1_set_msglevel(struct net_device *netdev, u32 value) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = value; +} + static int atl1_get_regs_len(struct net_device *netdev) { return ATL1_REG_COUNT * sizeof(u32); @@ -2772,6 +2823,8 @@ const struct ethtool_ops atl1_ethtool_ops = { .get_drvinfo = atl1_get_drvinfo, .get_wol = atl1_get_wol, .set_wol = atl1_set_wol, + .get_msglevel = atl1_get_msglevel, + .set_msglevel = atl1_set_msglevel, .get_regs_len = atl1_get_regs_len, .get_regs = atl1_get_regs, .get_ringparam = atl1_get_ringparam, @@ -2797,6 +2850,7 @@ const struct ethtool_ops atl1_ethtool_ops = { s32 atl1_reset_hw(struct atl1_hw *hw) { struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; u32 icr; int i; @@ -2836,7 +2890,8 @@ s32 atl1_reset_hw(struct atl1_hw *hw) } if (icr) { - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); return icr; } @@ -3205,6 +3260,7 @@ s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) static s32 atl1_phy_reset(struct atl1_hw *hw) { struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; s32 ret_val; u16 phy_data; @@ -3237,7 +3293,8 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) u32 val; int i; /* pcie serdes link may be down! */ - dev_dbg(&pdev->dev, "pcie phy link down\n"); + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "pcie phy link down\n"); for (i = 0; i < 25; i++) { msleep(1); @@ -3247,7 +3304,9 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) } if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "pcie link down at least 25ms\n"); return ret_val; } } @@ -3338,6 +3397,7 @@ s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) static s32 atl1_setup_link(struct atl1_hw *hw) { struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; s32 ret_val; /* @@ -3348,13 +3408,16 @@ static s32 atl1_setup_link(struct atl1_hw *hw) */ ret_val = atl1_phy_setup_autoneg_adv(hw); if (ret_val) { - dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, + "error setting up autonegotiation\n"); return ret_val; } /* SW.Reset , En-Auto-Neg if needed */ ret_val = atl1_phy_reset(hw); if (ret_val) { - dev_dbg(&pdev->dev, "error resetting phy\n"); + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, "error resetting phy\n"); return ret_val; } hw->phy_configured = true; @@ -3429,6 +3492,7 @@ s32 atl1_init_hw(struct atl1_hw *hw) s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) { struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; s32 ret_val; u16 phy_data; @@ -3451,7 +3515,8 @@ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) *speed = SPEED_10; break; default: - dev_dbg(&pdev->dev, "error getting speed\n"); + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "error getting speed\n"); return ATLX_ERR_PHY_SPEED; break; } diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 4d3d65b..12ec916 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -794,7 +794,7 @@ struct atl1_adapter { struct atl1_rrd_ring rrd_ring; u64 hw_csum_err; u64 hw_csum_good; - + u32 msg_enable; u16 imt; /* interrupt moderator timer (2us resolution) */ u16 ict; /* interrupt clear timer (2us resolution */ struct mii_if_info mii; /* MII interface info */ -- cgit v1.1 From 235ffa136c09c56db0c6c5fc5b5832749a72f557 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:10 -0600 Subject: atl1: print debug info if rrd error Add some debug printks if we encounter a potentially bad receive return descriptor. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 51eca23..4e4cb23 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1144,14 +1144,32 @@ chk_rrd: /* check rrd status */ if (likely(rrd->num_buf == 1)) goto rrd_ok; + else if (netif_msg_rx_err(adapter)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "unexpected RRD buffer count\n"); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "rx_buf_len = %d\n", + adapter->rx_buffer_len); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD num_buf = %d\n", + rrd->num_buf); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_len = %d\n", + rrd->xsz.xsum_sz.pkt_size); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_flg = 0x%08X\n", + rrd->pkt_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD err_flg = 0x%08X\n", + rrd->err_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD vlan_tag = 0x%08X\n", + rrd->vlan_tag); + } /* rrd seems to be bad */ if (unlikely(i-- > 0)) { /* rrd may not be DMAed completely */ - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, - &adapter->pdev->dev, - "unexpected RRD count\n"); udelay(1); goto chk_rrd; } -- cgit v1.1 From 0dde4ef99dcbf221bce6c0a5c3c3e4cdfea0b370 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:11 -0600 Subject: atl1: make functions static Make needlessly global functions static. In a couple of cases this requires removing forward declarations and reordering functions. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 101 ++++++++++++++++++++++++------------------------ drivers/net/atlx/atl1.h | 3 -- 2 files changed, 51 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 4e4cb23..6f4a1d5 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -211,7 +211,7 @@ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) * * Return 0 on success, negative on failure */ -s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) +static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) { struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; @@ -402,7 +402,7 @@ static void atl1_clean_tx_ring(struct atl1_adapter *adapter) * * Free all transmit software resources */ -void atl1_free_ring_resources(struct atl1_adapter *adapter) +static void atl1_free_ring_resources(struct atl1_adapter *adapter) { struct pci_dev *pdev = adapter->pdev; struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; @@ -580,40 +580,6 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) return 0; } -/* - * atl1_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - */ -static int atl1_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - - adapter->hw.max_frame_size = max_frame; - adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; - adapter->rx_buffer_len = (max_frame + 7) & ~7; - adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; - - netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { - atl1_down(adapter); - atl1_up(adapter); - } - - return 0; -} - static void set_flow_ctrl_old(struct atl1_adapter *adapter) { u32 hi, lo, value; @@ -1794,19 +1760,8 @@ static void atl1_phy_config(unsigned long data) * assert again and again. * */ -static void atl1_tx_timeout_task(struct work_struct *work) -{ - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); - struct net_device *netdev = adapter->netdev; - netif_device_detach(netdev); - atl1_down(adapter); - atl1_up(adapter); - netif_device_attach(netdev); -} - -int atl1_reset(struct atl1_adapter *adapter) +static int atl1_reset(struct atl1_adapter *adapter) { int ret; ret = atl1_reset_hw(&adapter->hw); @@ -1815,7 +1770,7 @@ int atl1_reset(struct atl1_adapter *adapter) return atl1_init_hw(&adapter->hw); } -s32 atl1_up(struct atl1_adapter *adapter) +static s32 atl1_up(struct atl1_adapter *adapter) { struct net_device *netdev = adapter->netdev; int err; @@ -1860,7 +1815,7 @@ err_up: return err; } -void atl1_down(struct atl1_adapter *adapter) +static void atl1_down(struct atl1_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -1883,6 +1838,52 @@ void atl1_down(struct atl1_adapter *adapter) atl1_clean_rx_ring(adapter); } +static void atl1_tx_timeout_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, tx_timeout_task); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1_down(adapter); + atl1_up(adapter); + netif_device_attach(netdev); +} + +/* + * atl1_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + + adapter->hw.max_frame_size = max_frame; + adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; + adapter->rx_buffer_len = (max_frame + 7) & ~7; + adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; + + netdev->mtu = new_mtu; + if ((old_mtu != new_mtu) && netif_running(netdev)) { + atl1_down(adapter); + atl1_up(adapter); + } + + return 0; +} + /* * atl1_open - Called when a network interface is made active * @netdev: network interface device structure diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 12ec916..6220298 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -73,9 +73,6 @@ void atl1_check_options(struct atl1_adapter *adapter); static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static u32 atl1_check_link(struct atl1_adapter *adapter); -s32 atl1_up(struct atl1_adapter *adapter); -void atl1_down(struct atl1_adapter *adapter); -int atl1_reset(struct atl1_adapter *adapter); extern const struct ethtool_ops atl1_ethtool_ops; -- cgit v1.1 From 6446a860f8b72b6a7b6722b3e30c4b00d6f99967 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sat, 2 Feb 2008 19:50:12 -0600 Subject: atl1: reduce forward declarations Rearrange functions to allow removal of some forward declarations. Make certain global functions static along the way. Signed-off-by: Jay Cliburn Acked-by: Chris Snook Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 5704 +++++++++++++++++++++++------------------------ drivers/net/atlx/atl1.h | 10 - 2 files changed, 2852 insertions(+), 2862 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 6f4a1d5..240db84 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -108,452 +108,436 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); /* - * atl1_sw_init - Initialize general software structures (struct atl1_adapter) - * @adapter: board private structure to initialize - * - * atl1_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) */ -static int __devinit atl1_sw_init(struct atl1_adapter *adapter) +static s32 atl1_reset_hw(struct atl1_hw *hw) { - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - - hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + u32 icr; + int i; - adapter->wol = 0; - adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; - adapter->ict = 50000; /* 100ms */ - adapter->link_speed = SPEED_0; /* hardware init */ - adapter->link_duplex = FULL_DUPLEX; + /* + * Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* + * iowrite32(0, hw->hw_addr + REG_IMR); + * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); + */ - hw->phy_configured = false; - hw->preamble_len = 7; - hw->ipgt = 0x60; - hw->min_ifg = 0x50; - hw->ipgr1 = 0x40; - hw->ipgr2 = 0x60; - hw->max_retry = 0xf; - hw->lcol = 0x37; - hw->jam_ipg = 7; - hw->rfd_burst = 8; - hw->rrd_burst = 8; - hw->rfd_fetch_gap = 1; - hw->rx_jumbo_th = adapter->rx_buffer_len / 8; - hw->rx_jumbo_lkah = 1; - hw->rrd_ret_timer = 16; - hw->tpd_burst = 4; - hw->tpd_fetch_th = 16; - hw->txf_burst = 0x100; - hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; - hw->tpd_fetch_gap = 1; - hw->rcb_value = atl1_rcb_64; - hw->dma_ord = atl1_dma_ord_enh; - hw->dmar_block = atl1_dma_req_256; - hw->dmaw_block = atl1_dma_req_256; - hw->cmb_rrd = 4; - hw->cmb_tpd = 4; - hw->cmb_rx_timer = 1; /* about 2us */ - hw->cmb_tx_timer = 1; /* about 2us */ - hw->smb_timer = 100000; /* about 200ms */ + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); + ioread32(hw->hw_addr + REG_MASTER_CTRL); - spin_lock_init(&adapter->lock); - spin_lock_init(&adapter->mb_lock); + iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); + ioread16(hw->hw_addr + REG_PHY_ENABLE); - return 0; -} + /* delay about 1ms */ + msleep(1); -static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - u16 result; + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); + if (!icr) + break; + /* delay 1 ms */ + msleep(1); + /* FIXME: still the right way to do this? */ + cpu_relax(); + } - atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); + if (icr) { + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + return icr; + } - return result; + return 0; } -static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, - int val) +/* function about EEPROM + * + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl1_check_eeprom_exist(struct atl1_hw *hw) { - struct atl1_adapter *adapter = netdev_priv(netdev); + u32 value; + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + } - atl1_write_phy_reg(&adapter->hw, reg_num, val); + value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; } -/* - * atl1_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - */ -static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) { - struct atl1_adapter *adapter = netdev_priv(netdev); - unsigned long flags; - int retval; + int i; + u32 control; - if (!netif_running(netdev)) - return -EINVAL; + if (offset & 3) + /* address do not align */ + return false; - spin_lock_irqsave(&adapter->lock, flags); - retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); - spin_unlock_irqrestore(&adapter->lock, flags); + iowrite32(0, hw->hw_addr + REG_VPD_DATA); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + iowrite32(control, hw->hw_addr + REG_VPD_CAP); + ioread32(hw->hw_addr + REG_VPD_CAP); - return retval; + for (i = 0; i < 10; i++) { + msleep(2); + control = ioread32(hw->hw_addr + REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); + return true; + } + /* timeout */ + return false; } /* - * atl1_setup_mem_resources - allocate Tx / RX descriptor resources - * @adapter: board private structure - * - * Return 0 on success, negative on failure + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read */ -static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) { - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - struct pci_dev *pdev = adapter->pdev; - int size; - u8 offset = 0; - - size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); - tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); - if (unlikely(!tpd_ring->buffer_info)) { - if (netif_msg_drv(adapter)) - dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", - size); - goto err_nomem; - } - rfd_ring->buffer_info = - (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); + u32 val; + int i; - /* - * real ring DMA buffer - * each ring/block may need up to 8 bytes for alignment, hence the - * additional 40 bytes tacked onto the end. - */ - ring_header->size = size = - sizeof(struct tx_packet_desc) * tpd_ring->count - + sizeof(struct rx_free_desc) * rfd_ring->count - + sizeof(struct rx_return_desc) * rrd_ring->count - + sizeof(struct coals_msg_block) - + sizeof(struct stats_msg_block) - + 40; + val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); - ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, - &ring_header->dma); - if (unlikely(!ring_header->desc)) { - if (netif_msg_drv(adapter)) - dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); - goto err_nomem; + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16) val; + return 0; } + return ATLX_ERR_PHY; +} - memset(ring_header->desc, 0, ring_header->size); +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 - /* init TPD ring */ - tpd_ring->dma = ring_header->dma; - offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; - tpd_ring->dma += offset; - tpd_ring->desc = (u8 *) ring_header->desc + offset; - tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; +static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; - /* init RFD ring */ - rfd_ring->dma = tpd_ring->dma + tpd_ring->size; - offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; - rfd_ring->dma += offset; - rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); - rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; + iowrite32(0, hw->hw_addr + REG_SPI_DATA); + iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & + SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & + SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & + SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & + SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << + SPI_FLASH_CTRL_INS_SHIFT; - /* init RRD ring */ - rrd_ring->dma = rfd_ring->dma + rfd_ring->size; - offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; - rrd_ring->dma += offset; - rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); - rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; - - - /* init CMB */ - adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; - offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; - adapter->cmb.dma += offset; - adapter->cmb.cmb = (struct coals_msg_block *) - ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); - - /* init SMB */ - adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); - offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; - adapter->smb.dma += offset; - adapter->smb.smb = (struct stats_msg_block *) - ((u8 *) adapter->cmb.cmb + - (sizeof(struct coals_msg_block) + offset)); - - return 0; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); -err_nomem: - kfree(tpd_ring->buffer_info); - return -ENOMEM; -} + value |= SPI_FLASH_CTRL_START; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); -static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) -{ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + for (i = 0; i < 10; i++) { + msleep(1); + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); + if (value & SPI_FLASH_CTRL_START) + return false; - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); + *buf = ioread32(hw->hw_addr + REG_SPI_DATA); - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); + return true; } /* - * atl1_clean_rx_ring - Free RFD Buffers - * @adapter: board private structure + * get_permanent_address + * return 0 if get valid mac address, */ -static void atl1_clean_rx_ring(struct atl1_adapter *adapter) +static int atl1_get_permanent_address(struct atl1_hw *hw) { - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; + u32 addr[2]; + u32 i, control; + u16 reg; + u8 eth_addr[ETH_ALEN]; + bool key_valid; - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rfd_ring->count; i++) { - buffer_info = &rfd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - buffer_info->dma = 0; + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1_check_eeprom_exist(hw)) { + reg = 0; + key_valid = false; + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl1_read_eeprom(hw, i + 0x100, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; + } else + /* read error */ + break; + i += 4; } - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; } + return 1; } - size = sizeof(struct atl1_buffer) * rfd_ring->count; - memset(rfd_ring->buffer_info, 0, size); + /* see if SPI FLAGS exist ? */ + addr[0] = addr[1] = 0; + reg = 0; + key_valid = false; + i = 0; + while (1) { + if (atl1_spi_read(hw, i + 0x1f000, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + /* data end */ + break; + } else + /* read error */ + break; + i += 4; + } - /* Zero out the descriptor ring */ - memset(rfd_ring->desc, 0, rfd_ring->size); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } - rfd_ring->next_to_clean = 0; - atomic_set(&rfd_ring->next_to_use, 0); + /* + * On some motherboards, the MAC address is written by the + * BIOS directly to the MAC register during POST, and is + * not stored in eeprom. If all else thus far has failed + * to fetch the permanent MAC address, try reading it directly. + */ + addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); + addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } - rrd_ring->next_to_use = 0; - atomic_set(&rrd_ring->next_to_clean, 0); + return 1; } /* - * atl1_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure + * Reads the adapter's MAC address from the EEPROM + * hw - Struct containing variables accessed by shared code */ -static void atl1_clean_tx_ring(struct atl1_adapter *adapter) +s32 atl1_read_mac_addr(struct atl1_hw *hw) { - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct pci_dev *pdev = adapter->pdev; - unsigned long size; - unsigned int i; - - /* Free all the Tx ring sk_buffs */ - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->dma) { - pci_unmap_page(pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } - } - - for (i = 0; i < tpd_ring->count; i++) { - buffer_info = &tpd_ring->buffer_info[i]; - if (buffer_info->skb) { - dev_kfree_skb_any(buffer_info->skb); - buffer_info->skb = NULL; - } - } - - size = sizeof(struct atl1_buffer) * tpd_ring->count; - memset(tpd_ring->buffer_info, 0, size); + u16 i; - /* Zero out the descriptor ring */ - memset(tpd_ring->desc, 0, tpd_ring->size); + if (atl1_get_permanent_address(hw)) + random_ether_addr(hw->perm_mac_addr); - atomic_set(&tpd_ring->next_to_use, 0); - atomic_set(&tpd_ring->next_to_clean, 0); + for (i = 0; i < ETH_ALEN; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return 0; } /* - * atl1_free_ring_resources - Free Tx / RX descriptor Resources - * @adapter: board private structure + * Hashes an address to determine its location in the multicast table + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash * - * Free all transmit software resources + * atl1_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB */ -static void atl1_free_ring_resources(struct atl1_adapter *adapter) +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) { - struct pci_dev *pdev = adapter->pdev; - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_ring_header *ring_header = &adapter->ring_header; - - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); - - kfree(tpd_ring->buffer_info); - pci_free_consistent(pdev, ring_header->size, ring_header->desc, - ring_header->dma); - - tpd_ring->buffer_info = NULL; - tpd_ring->desc = NULL; - tpd_ring->dma = 0; + u32 crc32, value = 0; + int i; - rfd_ring->buffer_info = NULL; - rfd_ring->desc = NULL; - rfd_ring->dma = 0; + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); - rrd_ring->desc = NULL; - rrd_ring->dma = 0; + return value; } -static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) { - u32 value; - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - /* Config MAC CTRL Register */ - value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; - /* duplex */ - if (FULL_DUPLEX == adapter->link_duplex) - value |= MAC_CTRL_DUPLX; - /* speed */ - value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? - MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << - MAC_CTRL_SPEED_SHIFT); - /* flow control */ - value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); - /* PAD & CRC */ - value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); - /* preamble length */ - value |= (((u32) adapter->hw.preamble_len - & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); - /* vlan */ - if (adapter->vlgrp) - value |= MAC_CTRL_RMV_VLAN; - /* rx checksum - if (adapter->rx_csum) - value |= MAC_CTRL_RX_CHKSUM_EN; + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. */ - /* filter mode */ - value |= MAC_CTRL_BC_EN; - if (netdev->flags & IFF_PROMISC) - value |= MAC_CTRL_PROMIS_EN; - else if (netdev->flags & IFF_ALLMULTI) - value |= MAC_CTRL_MC_ALL_EN; - /* value |= MAC_CTRL_LOOPBACK; */ - iowrite32(value, hw->hw_addr + REG_MAC_CTRL); + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + mta |= (1 << hash_bit); + iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); } -static u32 atl1_check_link(struct atl1_adapter *adapter) +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) { - struct atl1_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 ret_val; - u16 speed, duplex, phy_data; - int reconfig = 0; - - /* MII_BMSR must read twice */ - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - atl1_read_phy_reg(hw, MII_BMSR, &phy_data); - if (!(phy_data & BMSR_LSTATUS)) { - /* link down */ - if (netif_carrier_ok(netdev)) { - /* old link state: Up */ - if (netif_msg_link(adapter)) - dev_info(&adapter->pdev->dev, "link is down\n"); - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } - return 0; - } + int i; + u32 val; - /* Link Up */ - ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); - if (ret_val) - return ret_val; + val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); - switch (hw->media_type) { - case MEDIA_TYPE_1000M_FULL: - if (speed != SPEED_1000 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_FULL: - if (speed != SPEED_100 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_100M_HALF: - if (speed != SPEED_100 || duplex != HALF_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_FULL: - if (speed != SPEED_10 || duplex != FULL_DUPLEX) - reconfig = 1; - break; - case MEDIA_TYPE_10M_HALF: - if (speed != SPEED_10 || duplex != HALF_DUPLEX) - reconfig = 1; - break; + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; } - /* link result is our setting */ - if (!reconfig) { - if (adapter->link_speed != speed - || adapter->link_duplex != duplex) { - adapter->link_speed = speed; - adapter->link_duplex = duplex; - atl1_setup_mac_ctrl(adapter); - if (netif_msg_link(adapter)) - dev_info(&adapter->pdev->dev, - "%s link is up %d Mbps %s\n", - netdev->name, adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "full duplex" : "half duplex"); - } - if (!netif_carrier_ok(netdev)) { - /* Link down -> Up */ - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } + if (!(val & (MDIO_START | MDIO_BUSY))) return 0; - } - /* change original link status */ - if (netif_carrier_ok(netdev)) { - adapter->link_speed = SPEED_0; - netif_carrier_off(netdev); - netif_stop_queue(netdev); - } + return ATLX_ERR_PHY; +} - if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && - hw->media_type != MEDIA_TYPE_1000M_FULL) { +/* + * Make L001's PHY out of Power Saving State (bug) + * hw - Struct containing variables accessed by shared code + * when power on, L001's PHY always on Power saving State + * (Gigabit Link forbidden) + */ +static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +{ + s32 ret; + ret = atl1_write_phy_reg(hw, 29, 0x0029); + if (ret) + return ret; + return atl1_write_phy_reg(hw, 30, 0); +} + +/* + *TODO: do something or get rid of this + */ +static s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +{ +/* s32 ret_val; + * u16 phy_data; + */ + +/* + ret_val = atl1_write_phy_reg(hw, ...); + ret_val = atl1_write_phy_reg(hw, ...); + .... +*/ + return 0; +} + +/* + * Resets the PHY and make all config validate + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl1_phy_reset(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { switch (hw->media_type) { case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; break; case MEDIA_TYPE_100M_HALF: phy_data = MII_CR_SPEED_100 | MII_CR_RESET; @@ -567,2722 +551,2654 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) phy_data = MII_CR_SPEED_10 | MII_CR_RESET; break; } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - return 0; } - /* auto-neg, insert timer to re-config phy */ - if (!adapter->phy_timer_pending) { - adapter->phy_timer_pending = true; - mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); - } + ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down! */ + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "pcie phy link down\n"); + + for (i = 0; i < 25; i++) { + msleep(1); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if ((val & (MDIO_START | MDIO_BUSY)) != 0) { + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "pcie link down at least 25ms\n"); + return ret_val; + } + } return 0; } -static void set_flow_ctrl_old(struct atl1_adapter *adapter) +/* + * Configures PHY autoneg and flow control advertisement settings + * hw - Struct containing variables accessed by shared code + */ +static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) { - u32 hi, lo, value; + s32 ret_val; + s16 mii_autoneg_adv_reg; + s16 mii_1000t_ctrl_reg; - /* RFD Flow Control */ - value = adapter->rfd_ring.count; - hi = value / 16; - if (hi < 2) - hi = 2; - lo = value * 7 / 8; + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + /* Read the MII 1000Base-T Control Register (Address 9). */ + mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; - /* RRD Flow Control */ - value = adapter->rrd_ring.count; - lo = value / 16; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -static void set_flow_ctrl_new(struct atl1_hw *hw) -{ - u32 hi, lo, value; - - /* RXF Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); - lo = value / 16; - if (lo < 192) - lo = 192; - hi = value * 7 / 8; - if (hi < lo) - hi = lo + 16; - value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - - /* RRD Flow Control */ - value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); - lo = value / 8; - hi = value * 7 / 8; - if (lo < 2) - lo = 2; - if (hi < lo) - hi = lo + 3; - value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | - ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); -} - -/* - * atl1_configure - Configure Transmit&Receive Unit after Reset - * @adapter: board private structure - * - * Configure the Tx /Rx unit of the MAC after a reset. - */ -static u32 atl1_configure(struct atl1_adapter *adapter) -{ - struct atl1_hw *hw = &adapter->hw; - u32 value; - - /* clear interrupt status */ - iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); - - /* set MAC Address */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | - (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - - /* tx / rx ring */ - - /* HI base address */ - iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), - hw->hw_addr + REG_DESC_BASE_ADDR_HI); - /* LO base address */ - iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RFD_ADDR_LO); - iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_RRD_ADDR_LO); - iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_TPD_ADDR_LO); - iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_CMB_ADDR_LO); - iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), - hw->hw_addr + REG_DESC_SMB_ADDR_LO); - - /* element count */ - value = adapter->rrd_ring.count; - value <<= 16; - value += adapter->rfd_ring.count; - iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); - iowrite32(adapter->tpd_ring.count, hw->hw_addr + - REG_DESC_TPD_RING_SIZE); - - /* Load Ptr */ - iowrite32(1, hw->hw_addr + REG_LOAD_PTR); - - /* config Mailbox */ - value = ((atomic_read(&adapter->tpd_ring.next_to_use) - & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | - ((atomic_read(&adapter->rrd_ring.next_to_clean) - & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | - ((atomic_read(&adapter->rfd_ring.next_to_use) - & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAILBOX); - - /* config IPG/IFG */ - value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) - << MAC_IPG_IFG_IPGT_SHIFT) | - (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) - << MAC_IPG_IFG_MIFG_SHIFT) | - (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) - << MAC_IPG_IFG_IPGR1_SHIFT) | - (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) - << MAC_IPG_IFG_IPGR2_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); - - /* config Half-Duplex Control */ - value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | - (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) - << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | - MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | - (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | - (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) - << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; - /* set Interrupt Moderator Timer */ - iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); - iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); + /* + * Need to parse media_type and set up + * the appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; - /* set Interrupt Clear Timer */ - iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); + case MEDIA_TYPE_1000M_FULL: + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; - /* set max frame size hw will accept */ - iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + break; - /* jumbo size & rrd retirement timer */ - value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) - << RXQ_JMBOSZ_TH_SHIFT) | - (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) - << RXQ_JMBO_LKAH_SHIFT) | - (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) - << RXQ_RRD_TIMER_SHIFT); - iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + break; - /* Flow Control */ - switch (hw->dev_rev) { - case 0x8001: - case 0x9001: - case 0x9002: - case 0x9003: - set_flow_ctrl_old(adapter); + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; break; + default: - set_flow_ctrl_new(hw); + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; break; } - /* config TXQ */ - value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) - << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | - (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) - << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | - (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) - << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | - TXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); - - /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ - value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) - << TX_JUMBO_TASK_TH_SHIFT) | - (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) - << TX_TPD_MIN_IPG_SHIFT); - iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); - - /* config RXQ */ - value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) - << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | - (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) - << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | - (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) - << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | - RXQ_CTRL_EN; - iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); - - /* config DMA Engine */ - value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) - << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | - ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) - << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | - DMA_CTRL_DMAW_EN; - value |= (u32) hw->dma_ord; - if (atl1_rcb_128 == hw->rcb_value) - value |= DMA_CTRL_RCB_VALUE; - iowrite32(value, hw->hw_addr + REG_DMA_CTRL); + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); - /* config CMB / SMB */ - value = (hw->cmb_tpd > adapter->tpd_ring.count) ? - hw->cmb_tpd : adapter->tpd_ring.count; - value <<= 16; - value |= hw->cmb_rrd; - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); - value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); - iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); - iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; - /* --- enable CMB / SMB */ - value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; - iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); + ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; - value = ioread32(adapter->hw.hw_addr + REG_ISR); - if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) - value = 1; /* config failed */ - else - value = 0; + ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; - /* clear all interrupt status */ - iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); - iowrite32(0, adapter->hw.hw_addr + REG_ISR); - return value; + return 0; } /* - * atl1_pcie_patch - Patch for PCIE module + * Configures link settings. + * hw - Struct containing variables accessed by shared code + * Assumes the hardware has previously been reset and the + * transmitter and receiver are not enabled. */ -static void atl1_pcie_patch(struct atl1_adapter *adapter) +static s32 atl1_setup_link(struct atl1_hw *hw) { - u32 value; + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; - /* much vendor magic here */ - value = 0x6500; - iowrite32(value, adapter->hw.hw_addr + 0x12FC); - /* pcie flow control mode change */ - value = ioread32(adapter->hw.hw_addr + 0x1008); - value |= 0x8000; - iowrite32(value, adapter->hw.hw_addr + 0x1008); -} + /* + * Options: + * PHY will advertise value(s) parsed from + * autoneg_advertised and fc + * no matter what autoneg is , We will not wait link result. + */ + ret_val = atl1_phy_setup_autoneg_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, + "error setting up autonegotiation\n"); + return ret_val; + } + /* SW.Reset , En-Auto-Neg if needed */ + ret_val = atl1_phy_reset(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, "error resetting phy\n"); + return ret_val; + } + hw->phy_configured = true; + return ret_val; +} -/* - * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 - * on PCI Command register is disable. - * The function enable this bit. - * Brackett, 2006/03/15 - */ -static void atl1_via_workaround(struct atl1_adapter *adapter) +static void atl1_init_flash_opcode(struct atl1_hw *hw) { - unsigned long value; + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + /* Atmel */ + hw->flash_vendor = 0; - value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); - if (value & PCI_COMMAND_INTX_DISABLE) - value &= ~PCI_COMMAND_INTX_DISABLE; - iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); + /* Init OP table */ + iowrite8(flash_table[hw->flash_vendor].cmd_program, + hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); + iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, + hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, + hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_rdid, + hw->hw_addr + REG_SPI_FLASH_OP_RDID); + iowrite8(flash_table[hw->flash_vendor].cmd_wren, + hw->hw_addr + REG_SPI_FLASH_OP_WREN); + iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, + hw->hw_addr + REG_SPI_FLASH_OP_RDSR); + iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, + hw->hw_addr + REG_SPI_FLASH_OP_WRSR); + iowrite8(flash_table[hw->flash_vendor].cmd_read, + hw->hw_addr + REG_SPI_FLASH_OP_READ); } -static void atl1_inc_smb(struct atl1_adapter *adapter) +/* + * Performs basic configuration of the adapter. + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +static s32 atl1_init_hw(struct atl1_hw *hw) { - struct stats_msg_block *smb = adapter->smb.smb; - - /* Fill out the OS statistics structure */ - adapter->soft_stats.rx_packets += smb->rx_ok; - adapter->soft_stats.tx_packets += smb->tx_ok; - adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; - adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; - adapter->soft_stats.multicast += smb->rx_mcast; - adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + - smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); - - /* Rx Errors */ - adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + - smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + - smb->rx_rrd_ov + smb->rx_align_err); - adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; - adapter->soft_stats.rx_length_errors += smb->rx_len_err; - adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; - adapter->soft_stats.rx_frame_errors += smb->rx_align_err; - adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + - smb->rx_rxf_ov); - - adapter->soft_stats.rx_pause += smb->rx_pause; - adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; - adapter->soft_stats.rx_trunc += smb->rx_sz_ov; + u32 ret_val = 0; - /* Tx Errors */ - adapter->soft_stats.tx_errors += (smb->tx_late_col + - smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); - adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; - adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; - adapter->soft_stats.tx_window_errors += smb->tx_late_col; + /* Zero out the Multicast HASH table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + /* clear the old settings from the multicast hash table */ + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - adapter->soft_stats.excecol += smb->tx_abort_col; - adapter->soft_stats.deffer += smb->tx_defer; - adapter->soft_stats.scc += smb->tx_1_col; - adapter->soft_stats.mcc += smb->tx_2_col; - adapter->soft_stats.latecol += smb->tx_late_col; - adapter->soft_stats.tx_underun += smb->tx_underrun; - adapter->soft_stats.tx_trunc += smb->tx_trunc; - adapter->soft_stats.tx_pause += smb->tx_pause; + atl1_init_flash_opcode(hw); - adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; - adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; - adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; - adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; - adapter->net_stats.multicast = adapter->soft_stats.multicast; - adapter->net_stats.collisions = adapter->soft_stats.collisions; - adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; - adapter->net_stats.rx_over_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.rx_length_errors = - adapter->soft_stats.rx_length_errors; - adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; - adapter->net_stats.rx_frame_errors = - adapter->soft_stats.rx_frame_errors; - adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; - adapter->net_stats.rx_missed_errors = - adapter->soft_stats.rx_missed_errors; - adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; - adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; - adapter->net_stats.tx_aborted_errors = - adapter->soft_stats.tx_aborted_errors; - adapter->net_stats.tx_window_errors = - adapter->soft_stats.tx_window_errors; - adapter->net_stats.tx_carrier_errors = - adapter->soft_stats.tx_carrier_errors; + if (!hw->phy_configured) { + /* enable GPHY LinkChange Interrrupt */ + ret_val = atl1_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + /* make PHY out of power-saving state */ + ret_val = atl1_phy_leave_power_saving(hw); + if (ret_val) + return ret_val; + /* Call a subroutine to configure the link */ + ret_val = atl1_setup_link(hw); + } + return ret_val; } -static void atl1_update_mailbox(struct atl1_adapter *adapter) +/* + * Detects the current speed and duplex settings of the hardware. + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) { - unsigned long flags; - u32 tpd_next_to_use; - u32 rfd_next_to_use; - u32 rrd_next_to_clean; - u32 value; - - spin_lock_irqsave(&adapter->mb_lock, flags); - - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); - - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; - spin_unlock_irqrestore(&adapter->mb_lock, flags); -} + /* ; --- Read PHY Specific Status Register (17) */ + ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); + if (ret_val) + return ret_val; -static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, u16 offset) -{ - struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) + return ATLX_ERR_PHY_RES; - while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { - rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; - if (++rfd_ring->next_to_clean == rfd_ring->count) { - rfd_ring->next_to_clean = 0; - } + switch (phy_data & MII_ATLX_PSSR_SPEED) { + case MII_ATLX_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_ATLX_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_ATLX_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "error getting speed\n"); + return ATLX_ERR_PHY_SPEED; + break; } + if (phy_data & MII_ATLX_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; } -static void atl1_update_rfd_index(struct atl1_adapter *adapter, - struct rx_return_desc *rrd) +void atl1_set_mac_addr(struct atl1_hw *hw) { - u16 num_buf; - - num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / - adapter->rx_buffer_len; - if (rrd->num_buf == num_buf) - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, num_buf); + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + /* high dword */ + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); } -static void atl1_rx_checksum(struct atl1_adapter *adapter, - struct rx_return_desc *rrd, struct sk_buff *skb) +/* + * atl1_sw_init - Initialize general software structures (struct atl1_adapter) + * @adapter: board private structure to initialize + * + * atl1_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1_sw_init(struct atl1_adapter *adapter) { - struct pci_dev *pdev = adapter->pdev; + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; - skb->ip_summed = CHECKSUM_NONE; + hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | - ERR_FLAG_CODE | ERR_FLAG_OV)) { - adapter->hw_csum_err++; - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, &pdev->dev, - "rx checksum error\n"); - return; - } - } + adapter->wol = 0; + adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7; + adapter->ict = 50000; /* 100ms */ + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; - /* not IPv4 */ - if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) - /* checksum is invalid, but it's not an IPv4 pkt, so ok */ - return; + hw->phy_configured = false; + hw->preamble_len = 7; + hw->ipgt = 0x60; + hw->min_ifg = 0x50; + hw->ipgr1 = 0x40; + hw->ipgr2 = 0x60; + hw->max_retry = 0xf; + hw->lcol = 0x37; + hw->jam_ipg = 7; + hw->rfd_burst = 8; + hw->rrd_burst = 8; + hw->rfd_fetch_gap = 1; + hw->rx_jumbo_th = adapter->rx_buffer_len / 8; + hw->rx_jumbo_lkah = 1; + hw->rrd_ret_timer = 16; + hw->tpd_burst = 4; + hw->tpd_fetch_th = 16; + hw->txf_burst = 0x100; + hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3; + hw->tpd_fetch_gap = 1; + hw->rcb_value = atl1_rcb_64; + hw->dma_ord = atl1_dma_ord_enh; + hw->dmar_block = atl1_dma_req_256; + hw->dmaw_block = atl1_dma_req_256; + hw->cmb_rrd = 4; + hw->cmb_tpd = 4; + hw->cmb_rx_timer = 1; /* about 2us */ + hw->cmb_tx_timer = 1; /* about 2us */ + hw->smb_timer = 100000; /* about 200ms */ - /* IPv4 packet */ - if (likely(!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; - return; - } + spin_lock_init(&adapter->lock); + spin_lock_init(&adapter->mb_lock); - /* IPv4, but hardware thinks its checksum is wrong */ - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); - adapter->hw_csum_err++; - return; + return 0; +} + +static int mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result); + + return result; +} + +static void mdio_write(struct net_device *netdev, int phy_id, int reg_num, + int val) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + atl1_write_phy_reg(&adapter->hw, reg_num, val); } /* - * atl1_alloc_rx_buffers - Replace used receive buffers - * @adapter: address of board private structure + * atl1_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: */ -static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + int retval; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->lock, flags); + retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL); + spin_unlock_irqrestore(&adapter->lock, flags); + + return retval; +} + +/* + * atl1_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) { + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; struct pci_dev *pdev = adapter->pdev; - struct page *page; - unsigned long offset; - struct atl1_buffer *buffer_info, *next_info; - struct sk_buff *skb; - u16 num_alloc = 0; - u16 rfd_next_to_use, next_next; - struct rx_free_desc *rfd_desc; + int size; + u8 offset = 0; - next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); - if (++next_next == rfd_ring->count) - next_next = 0; - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; + size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", + size); + goto err_nomem; + } + rfd_ring->buffer_info = + (struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count); - while (!buffer_info->alloced && !next_info->alloced) { - if (buffer_info->skb) { - buffer_info->alloced = 1; - goto next; - } + /* + * real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional 40 bytes tacked onto the end. + */ + ring_header->size = size = + sizeof(struct tx_packet_desc) * tpd_ring->count + + sizeof(struct rx_free_desc) * rfd_ring->count + + sizeof(struct rx_return_desc) * rrd_ring->count + + sizeof(struct coals_msg_block) + + sizeof(struct stats_msg_block) + + 40; - rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); + ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, + &ring_header->dma); + if (unlikely(!ring_header->desc)) { + if (netif_msg_drv(adapter)) + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); + goto err_nomem; + } - skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); - if (unlikely(!skb)) { - /* Better luck next round */ - adapter->net_stats.rx_dropped++; - break; - } + memset(ring_header->desc, 0, ring_header->size); - /* - * Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); + /* init TPD ring */ + tpd_ring->dma = ring_header->dma; + offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0; + tpd_ring->dma += offset; + tpd_ring->desc = (u8 *) ring_header->desc + offset; + tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count; - buffer_info->alloced = 1; - buffer_info->skb = skb; - buffer_info->length = (u16) adapter->rx_buffer_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(pdev, page, offset, - adapter->rx_buffer_len, - PCI_DMA_FROMDEVICE); - rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); - rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); - rfd_desc->coalese = 0; + /* init RFD ring */ + rfd_ring->dma = tpd_ring->dma + tpd_ring->size; + offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0; + rfd_ring->dma += offset; + rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset); + rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count; -next: - rfd_next_to_use = next_next; - if (unlikely(++next_next == rfd_ring->count)) - next_next = 0; - buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; - next_info = &rfd_ring->buffer_info[next_next]; - num_alloc++; - } + /* init RRD ring */ + rrd_ring->dma = rfd_ring->dma + rfd_ring->size; + offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0; + rrd_ring->dma += offset; + rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset); + rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count; - if (num_alloc) { - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); - } - return num_alloc; + + /* init CMB */ + adapter->cmb.dma = rrd_ring->dma + rrd_ring->size; + offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0; + adapter->cmb.dma += offset; + adapter->cmb.cmb = (struct coals_msg_block *) + ((u8 *) rrd_ring->desc + (rrd_ring->size + offset)); + + /* init SMB */ + adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block); + offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0; + adapter->smb.dma += offset; + adapter->smb.smb = (struct stats_msg_block *) + ((u8 *) adapter->cmb.cmb + + (sizeof(struct coals_msg_block) + offset)); + + return 0; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; } -static void atl1_intr_rx(struct atl1_adapter *adapter) +static void atl1_init_ring_ptrs(struct atl1_adapter *adapter) { - int i, count; - u16 length; - u16 rrd_next_to_clean; - u32 value; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; - struct atl1_buffer *buffer_info; - struct rx_return_desc *rrd; - struct sk_buff *skb; - - count = 0; - rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); - while (1) { - rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); - i = 1; - if (likely(rrd->xsz.valid)) { /* packet valid */ -chk_rrd: - /* check rrd status */ - if (likely(rrd->num_buf == 1)) - goto rrd_ok; - else if (netif_msg_rx_err(adapter)) { - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "unexpected RRD buffer count\n"); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "rx_buf_len = %d\n", - adapter->rx_buffer_len); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "RRD num_buf = %d\n", - rrd->num_buf); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "RRD pkt_len = %d\n", - rrd->xsz.xsum_sz.pkt_size); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "RRD pkt_flg = 0x%08X\n", - rrd->pkt_flg); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "RRD err_flg = 0x%08X\n", - rrd->err_flg); - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "RRD vlan_tag = 0x%08X\n", - rrd->vlan_tag); - } + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); - /* rrd seems to be bad */ - if (unlikely(i-- > 0)) { - /* rrd may not be DMAed completely */ - udelay(1); - goto chk_rrd; - } - /* bad rrd */ - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "bad RRD\n"); - /* see if update RFD index */ - if (rrd->num_buf > 1) - atl1_update_rfd_index(adapter, rrd); + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); +} - /* update rrd */ - rrd->xsz.valid = 0; - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - continue; - } else { /* current rrd still not be updated */ +/* + * atl1_clean_rx_ring - Free RFD Buffers + * @adapter: board private structure + */ +static void atl1_clean_rx_ring(struct atl1_adapter *adapter) +{ + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; - break; + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rfd_ring->count; i++) { + buffer_info = &rfd_ring->buffer_info[i]; + if (buffer_info->dma) { + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; } -rrd_ok: - /* clean alloc flag for bad rrd */ - atl1_clean_alloc_flag(adapter, rrd, 0); - - buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; - if (++rfd_ring->next_to_clean == rfd_ring->count) - rfd_ring->next_to_clean = 0; - - /* update rrd next to clean */ - if (++rrd_next_to_clean == rrd_ring->count) - rrd_next_to_clean = 0; - count++; - - if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { - if (!(rrd->err_flg & - (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM - | ERR_FLAG_LEN))) { - /* packet error, don't need upstream */ - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - continue; - } + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; } - - /* Good Receive */ - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_FROMDEVICE); - skb = buffer_info->skb; - length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); - - skb_put(skb, length - ETH_FCS_LEN); - - /* Receive Checksum Offload */ - atl1_rx_checksum(adapter, rrd, skb); - skb->protocol = eth_type_trans(skb, adapter->netdev); - - if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { - u16 vlan_tag = (rrd->vlan_tag >> 4) | - ((rrd->vlan_tag & 7) << 13) | - ((rrd->vlan_tag & 8) << 9); - vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); - } else - netif_rx(skb); - - /* let protocol layer free skb */ - buffer_info->skb = NULL; - buffer_info->alloced = 0; - rrd->xsz.valid = 0; - - adapter->netdev->last_rx = jiffies; } - atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); - - atl1_alloc_rx_buffers(adapter); + size = sizeof(struct atl1_buffer) * rfd_ring->count; + memset(rfd_ring->buffer_info, 0, size); - /* update mailbox ? */ - if (count) { - u32 tpd_next_to_use; - u32 rfd_next_to_use; + /* Zero out the descriptor ring */ + memset(rfd_ring->desc, 0, rfd_ring->size); - spin_lock(&adapter->mb_lock); + rfd_ring->next_to_clean = 0; + atomic_set(&rfd_ring->next_to_use, 0); - tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); - rfd_next_to_use = - atomic_read(&adapter->rfd_ring.next_to_use); - rrd_next_to_clean = - atomic_read(&adapter->rrd_ring.next_to_clean); - value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << - MB_RFD_PROD_INDX_SHIFT) | - ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << - MB_RRD_CONS_INDX_SHIFT) | - ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << - MB_TPD_PROD_INDX_SHIFT); - iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - spin_unlock(&adapter->mb_lock); - } + rrd_ring->next_to_use = 0; + atomic_set(&rrd_ring->next_to_clean, 0); } -static void atl1_intr_tx(struct atl1_adapter *adapter) +/* + * atl1_clean_tx_ring - Free Tx Buffers + * @adapter: board private structure + */ +static void atl1_clean_tx_ring(struct atl1_adapter *adapter) { struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; struct atl1_buffer *buffer_info; - u16 sw_tpd_next_to_clean; - u16 cmb_tpd_next_to_clean; - - sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); - cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); - - while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { - struct tx_packet_desc *tpd; + struct pci_dev *pdev = adapter->pdev; + unsigned long size; + unsigned int i; - tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); - buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; if (buffer_info->dma) { - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); + pci_unmap_page(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); buffer_info->dma = 0; } + } + for (i = 0; i < tpd_ring->count; i++) { + buffer_info = &tpd_ring->buffer_info[i]; if (buffer_info->skb) { - dev_kfree_skb_irq(buffer_info->skb); + dev_kfree_skb_any(buffer_info->skb); buffer_info->skb = NULL; } - - if (++sw_tpd_next_to_clean == tpd_ring->count) - sw_tpd_next_to_clean = 0; } - atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); - if (netif_queue_stopped(adapter->netdev) - && netif_carrier_ok(adapter->netdev)) - netif_wake_queue(adapter->netdev); -} + size = sizeof(struct atl1_buffer) * tpd_ring->count; + memset(tpd_ring->buffer_info, 0, size); -static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) -{ - u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); - u16 next_to_use = atomic_read(&tpd_ring->next_to_use); - return ((next_to_clean > next_to_use) ? - next_to_clean - next_to_use - 1 : - tpd_ring->count + next_to_clean - next_to_use - 1); + /* Zero out the descriptor ring */ + memset(tpd_ring->desc, 0, tpd_ring->size); + + atomic_set(&tpd_ring->next_to_use, 0); + atomic_set(&tpd_ring->next_to_clean, 0); } -static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tx_packet_desc *ptpd) +/* + * atl1_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl1_free_ring_resources(struct atl1_adapter *adapter) { - /* spinlock held */ - u8 hdr_len, ip_off; - u32 real_len; - int err; + struct pci_dev *pdev = adapter->pdev; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_ring_header *ring_header = &adapter->ring_header; - if (skb_shinfo(skb)->gso_size) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (unlikely(err)) - return -1; - } + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); - if (skb->protocol == ntohs(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); + kfree(tpd_ring->buffer_info); + pci_free_consistent(pdev, ring_header->size, ring_header->desc, + ring_header->dma); - real_len = (((unsigned char *)iph - skb->data) + - ntohs(iph->tot_len)); - if (real_len < skb->len) - pskb_trim(skb, real_len); - hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); - if (skb->len == hdr_len) { - iph->check = 0; - tcp_hdr(skb)->check = - ~csum_tcpudp_magic(iph->saddr, - iph->daddr, tcp_hdrlen(skb), - IPPROTO_TCP, 0); - ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << - TPD_IPHL_SHIFT; - ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & - TPD_TCPHDRLEN_MASK) << - TPD_TCPHDRLEN_SHIFT; - ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; - ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; - return 1; - } + tpd_ring->buffer_info = NULL; + tpd_ring->desc = NULL; + tpd_ring->dma = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, IPPROTO_TCP, 0); - ip_off = (unsigned char *)iph - - (unsigned char *) skb_network_header(skb); - if (ip_off == 8) /* 802.3-SNAP frame */ - ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; - else if (ip_off != 0) - return -2; + rfd_ring->buffer_info = NULL; + rfd_ring->desc = NULL; + rfd_ring->dma = 0; - ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << - TPD_IPHL_SHIFT; - ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & - TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; - ptpd->word3 |= (skb_shinfo(skb)->gso_size & - TPD_MSS_MASK) << TPD_MSS_SHIFT; - ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; - return 3; - } - } - return false; + rrd_ring->desc = NULL; + rrd_ring->dma = 0; } -static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tx_packet_desc *ptpd) +static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) { - u8 css, cso; - - if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - css = (u8) (skb->csum_start - skb_headroom(skb)); - cso = css + (u8) skb->csum_offset; - if (unlikely(css & 0x1)) { - /* L1 hardware requires an even number here */ - if (netif_msg_tx_err(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "payload offset not an even number\n"); - return -1; - } - ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << - TPD_PLOADOFFSET_SHIFT; - ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << - TPD_CCSUMOFFSET_SHIFT; - ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; - return true; - } - return 0; + u32 value; + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + /* duplex */ + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + /* speed */ + value |= ((u32) ((SPEED_1000 == adapter->link_speed) ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << + MAC_CTRL_SPEED_SHIFT); + /* flow control */ + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + /* PAD & CRC */ + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + /* preamble length */ + value |= (((u32) adapter->hw.preamble_len + & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + /* vlan */ + if (adapter->vlgrp) + value |= MAC_CTRL_RMV_VLAN; + /* rx checksum + if (adapter->rx_csum) + value |= MAC_CTRL_RX_CHKSUM_EN; + */ + /* filter mode */ + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + else if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + /* value |= MAC_CTRL_LOOPBACK; */ + iowrite32(value, hw->hw_addr + REG_MAC_CTRL); } -static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, - struct tx_packet_desc *ptpd) +static u32 atl1_check_link(struct atl1_adapter *adapter) { - /* spinlock held */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - u16 buf_len = skb->len; - struct page *page; - unsigned long offset; - unsigned int nr_frags; - unsigned int f; - int retval; - u16 next_to_use; - u16 data_len; - u8 hdr_len; - - buf_len -= skb->data_len; - nr_frags = skb_shinfo(skb)->nr_frags; - next_to_use = atomic_read(&tpd_ring->next_to_use); - buffer_info = &tpd_ring->buffer_info[next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - /* put skb in last TPD */ - buffer_info->skb = NULL; - - retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; - if (retval) { - /* TSO */ - hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - buffer_info->length = hdr_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, hdr_len, - PCI_DMA_TODEVICE); - - if (++next_to_use == tpd_ring->count) - next_to_use = 0; - - if (buf_len > hdr_len) { - int i, nseg; - - data_len = buf_len - hdr_len; - nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < nseg; i++) { - buffer_info = - &tpd_ring->buffer_info[next_to_use]; - buffer_info->skb = NULL; - buffer_info->length = - (ATL1_MAX_TX_BUF_LEN >= - data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; - data_len -= buffer_info->length; - page = virt_to_page(skb->data + - (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); - offset = (unsigned long)(skb->data + - (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) & - ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, - page, offset, buffer_info->length, - PCI_DMA_TODEVICE); - if (++next_to_use == tpd_ring->count) - next_to_use = 0; - } - } - } else { - /* not TSO */ - buffer_info->length = buf_len; - page = virt_to_page(skb->data); - offset = (unsigned long)skb->data & ~PAGE_MASK; - buffer_info->dma = pci_map_page(adapter->pdev, page, - offset, buf_len, PCI_DMA_TODEVICE); - if (++next_to_use == tpd_ring->count) - next_to_use = 0; - } - - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - u16 i, nseg; - - frag = &skb_shinfo(skb)->frags[f]; - buf_len = frag->size; - - nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; - for (i = 0; i < nseg; i++) { - buffer_info = &tpd_ring->buffer_info[next_to_use]; - if (unlikely(buffer_info->skb)) - BUG(); - buffer_info->skb = NULL; - buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? - ATL1_MAX_TX_BUF_LEN : buf_len; - buf_len -= buffer_info->length; - buffer_info->dma = pci_map_page(adapter->pdev, - frag->page, - frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), - buffer_info->length, PCI_DMA_TODEVICE); + struct atl1_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 ret_val; + u16 speed, duplex, phy_data; + int reconfig = 0; - if (++next_to_use == tpd_ring->count) - next_to_use = 0; + /* MII_BMSR must read twice */ + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1_read_phy_reg(hw, MII_BMSR, &phy_data); + if (!(phy_data & BMSR_LSTATUS)) { + /* link down */ + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, "link is down\n"); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); } + return 0; } - /* last tpd's buffer-info */ - buffer_info->skb = skb; -} - -static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, - struct tx_packet_desc *ptpd) -{ - /* spinlock held */ - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - struct atl1_buffer *buffer_info; - struct tx_packet_desc *tpd; - u16 j; - u32 val; - u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); - - for (j = 0; j < count; j++) { - buffer_info = &tpd_ring->buffer_info[next_to_use]; - tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); - if (tpd != ptpd) - memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); - tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->word2 = (cpu_to_le16(buffer_info->length) & - TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; - - /* - * if this is the first packet in a TSO chain, set - * TPD_HDRFLAG, otherwise, clear it. - */ - val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & - TPD_SEGMENT_EN_MASK; - if (val) { - if (!j) - tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; - else - tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); - } - - if (j == (count - 1)) - tpd->word3 |= 1 << TPD_EOP_SHIFT; + /* Link Up */ + ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex); + if (ret_val) + return ret_val; - if (++next_to_use == tpd_ring->count) - next_to_use = 0; + switch (hw->media_type) { + case MEDIA_TYPE_1000M_FULL: + if (speed != SPEED_1000 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_FULL: + if (speed != SPEED_100 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_100M_HALF: + if (speed != SPEED_100 || duplex != HALF_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_FULL: + if (speed != SPEED_10 || duplex != FULL_DUPLEX) + reconfig = 1; + break; + case MEDIA_TYPE_10M_HALF: + if (speed != SPEED_10 || duplex != HALF_DUPLEX) + reconfig = 1; + break; } - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - atomic_set(&tpd_ring->next_to_use, next_to_use); -} - -static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; - int len = skb->len; - int tso; - int count = 1; - int ret_val; - struct tx_packet_desc *ptpd; - u16 frag_size; - u16 vlan_tag; - unsigned long flags; - unsigned int nr_frags = 0; - unsigned int mss = 0; - unsigned int f; - unsigned int proto_hdr_len; - - len -= skb->data_len; - - if (unlikely(skb->len <= 0)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + /* link result is our setting */ + if (!reconfig) { + if (adapter->link_speed != speed + || adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1_setup_mac_ctrl(adapter); + if (netif_msg_link(adapter)) + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); + } + if (!netif_carrier_ok(netdev)) { + /* Link down -> Up */ + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + return 0; } - nr_frags = skb_shinfo(skb)->nr_frags; - for (f = 0; f < nr_frags; f++) { - frag_size = skb_shinfo(skb)->frags[f].size; - if (frag_size) - count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; + /* change original link status */ + if (netif_carrier_ok(netdev)) { + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); } - mss = skb_shinfo(skb)->gso_size; - if (mss) { - if (skb->protocol == ntohs(ETH_P_IP)) { - proto_hdr_len = (skb_transport_offset(skb) + - tcp_hdrlen(skb)); - if (unlikely(proto_hdr_len > len)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - /* need additional TPD ? */ - if (proto_hdr_len != len) - count += (len - proto_hdr_len + - ATL1_MAX_TX_BUF_LEN - 1) / - ATL1_MAX_TX_BUF_LEN; + if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR && + hw->media_type != MEDIA_TYPE_1000M_FULL) { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + return 0; } - if (!spin_trylock_irqsave(&adapter->lock, flags)) { - /* Can't get lock - tell upper layer to requeue */ - if (netif_msg_tx_queued(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "tx locked\n"); - return NETDEV_TX_LOCKED; + /* auto-neg, insert timer to re-config phy */ + if (!adapter->phy_timer_pending) { + adapter->phy_timer_pending = true; + mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ); } - if (atl1_tpd_avail(&adapter->tpd_ring) < count) { - /* not enough descriptors */ - netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->lock, flags); - if (netif_msg_tx_queued(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "tx busy\n"); - return NETDEV_TX_BUSY; - } + return 0; +} - ptpd = ATL1_TPD_DESC(tpd_ring, - (u16) atomic_read(&tpd_ring->next_to_use)); - memset(ptpd, 0, sizeof(struct tx_packet_desc)); +static void set_flow_ctrl_old(struct atl1_adapter *adapter) +{ + u32 hi, lo, value; - if (adapter->vlgrp && vlan_tx_tag_present(skb)) { - vlan_tag = vlan_tx_tag_get(skb); - vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | - ((vlan_tag >> 9) & 0x8); - ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; - ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << - TPD_VL_TAGGED_SHIFT; - } + /* RFD Flow Control */ + value = adapter->rfd_ring.count; + hi = value / 16; + if (hi < 2) + hi = 2; + lo = value * 7 / 8; - tso = atl1_tso(adapter, skb, ptpd); - if (tso < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH); - if (!tso) { - ret_val = atl1_tx_csum(adapter, skb, ptpd); - if (ret_val < 0) { - spin_unlock_irqrestore(&adapter->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - } + /* RRD Flow Control */ + value = adapter->rrd_ring.count; + lo = value / 16; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH); +} - atl1_tx_map(adapter, skb, ptpd); - atl1_tx_queue(adapter, count, ptpd); - atl1_update_mailbox(adapter); - spin_unlock_irqrestore(&adapter->lock, flags); - netdev->trans_start = jiffies; - return NETDEV_TX_OK; +static void set_flow_ctrl_new(struct atl1_hw *hw) +{ + u32 hi, lo, value; + + /* RXF Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN); + lo = value / 16; + if (lo < 192) + lo = 192; + hi = value * 7 / 8; + if (hi < lo) + hi = lo + 16; + value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH); + + /* RRD Flow Control */ + value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN); + lo = value / 8; + hi = value * 7 / 8; + if (lo < 2) + lo = 2; + if (hi < lo) + hi = lo + 3; + value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) | + ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH); } /* - * atl1_intr - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure + * atl1_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. */ -static irqreturn_t atl1_intr(int irq, void *data) +static u32 atl1_configure(struct atl1_adapter *adapter) { - struct atl1_adapter *adapter = netdev_priv(data); - u32 status; - u8 update_rx; - int max_ints = 10; + struct atl1_hw *hw = &adapter->hw; + u32 value; - status = adapter->cmb.cmb->int_stats; - if (!status) - return IRQ_NONE; + /* clear interrupt status */ + iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR); - update_rx = 0; + /* set MAC Address */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | + (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - do { - /* clear CMB interrupt status at once */ - adapter->cmb.cmb->int_stats = 0; + /* tx / rx ring */ - if (status & ISR_GPHY) /* clear phy status */ - atlx_clear_phy_int(adapter); + /* HI base address */ + iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32), + hw->hw_addr + REG_DESC_BASE_ADDR_HI); + /* LO base address */ + iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RFD_ADDR_LO); + iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_RRD_ADDR_LO); + iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_TPD_ADDR_LO); + iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_CMB_ADDR_LO); + iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL), + hw->hw_addr + REG_DESC_SMB_ADDR_LO); + + /* element count */ + value = adapter->rrd_ring.count; + value <<= 16; + value += adapter->rfd_ring.count; + iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE); + iowrite32(adapter->tpd_ring.count, hw->hw_addr + + REG_DESC_TPD_RING_SIZE); + + /* Load Ptr */ + iowrite32(1, hw->hw_addr + REG_LOAD_PTR); + + /* config Mailbox */ + value = ((atomic_read(&adapter->tpd_ring.next_to_use) + & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) | + ((atomic_read(&adapter->rrd_ring.next_to_clean) + & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) | + ((atomic_read(&adapter->rfd_ring.next_to_use) + & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAILBOX); + + /* config IPG/IFG */ + value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK) + << MAC_IPG_IFG_IPGT_SHIFT) | + (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) + << MAC_IPG_IFG_MIFG_SHIFT) | + (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) + << MAC_IPG_IFG_IPGR1_SHIFT) | + (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) + << MAC_IPG_IFG_IPGR2_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG); + + /* config Half-Duplex Control */ + value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) | + (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) + << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) | + MAC_HALF_DUPLX_CTRL_EXC_DEF_EN | + (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) | + (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) + << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL); + + /* set Interrupt Moderator Timer */ + iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT); + iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL); - /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ - iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); + /* set Interrupt Clear Timer */ + iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER); - /* check if SMB intr */ - if (status & ISR_SMB) - atl1_inc_smb(adapter); + /* set max frame size hw will accept */ + iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU); - /* check if PCIE PHY Link down */ - if (status & ISR_PHY_LINKDOWN) { - if (netif_msg_intr(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie phy link down %x\n", status); - if (netif_running(adapter->netdev)) { /* reset MAC */ - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } - } + /* jumbo size & rrd retirement timer */ + value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) + << RXQ_JMBOSZ_TH_SHIFT) | + (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK) + << RXQ_JMBO_LKAH_SHIFT) | + (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK) + << RXQ_RRD_TIMER_SHIFT); + iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM); - /* check if DMA read/write error ? */ - if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - if (netif_msg_intr(adapter)) - dev_printk(KERN_DEBUG, &adapter->pdev->dev, - "pcie DMA r/w error (status = 0x%x)\n", - status); - iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); - return IRQ_HANDLED; - } + /* Flow Control */ + switch (hw->dev_rev) { + case 0x8001: + case 0x9001: + case 0x9002: + case 0x9003: + set_flow_ctrl_old(adapter); + break; + default: + set_flow_ctrl_new(hw); + break; + } - /* link event */ - if (status & ISR_GPHY) { - adapter->soft_stats.tx_carrier_errors++; - atl1_check_for_link(adapter); - } + /* config TXQ */ + value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK) + << TXQ_CTRL_TPD_BURST_NUM_SHIFT) | + (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK) + << TXQ_CTRL_TXF_BURST_NUM_SHIFT) | + (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK) + << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE | + TXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_TXQ_CTRL); - /* transmit event */ - if (status & ISR_CMB_TX) - atl1_intr_tx(adapter); + /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */ + value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK) + << TX_JUMBO_TASK_TH_SHIFT) | + (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK) + << TX_TPD_MIN_IPG_SHIFT); + iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG); - /* rx exception */ - if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV | ISR_CMB_RX))) { - if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | - ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV)) - if (netif_msg_intr(adapter)) - dev_printk(KERN_DEBUG, - &adapter->pdev->dev, - "rx exception, ISR = 0x%x\n", - status); - atl1_intr_rx(adapter); - } + /* config RXQ */ + value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK) + << RXQ_CTRL_RFD_BURST_NUM_SHIFT) | + (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK) + << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) | + (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK) + << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN | + RXQ_CTRL_EN; + iowrite32(value, hw->hw_addr + REG_RXQ_CTRL); - if (--max_ints < 0) - break; + /* config DMA Engine */ + value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT) | + ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN | + DMA_CTRL_DMAW_EN; + value |= (u32) hw->dma_ord; + if (atl1_rcb_128 == hw->rcb_value) + value |= DMA_CTRL_RCB_VALUE; + iowrite32(value, hw->hw_addr + REG_DMA_CTRL); - } while ((status = adapter->cmb.cmb->int_stats)); + /* config CMB / SMB */ + value = (hw->cmb_tpd > adapter->tpd_ring.count) ? + hw->cmb_tpd : adapter->tpd_ring.count; + value <<= 16; + value |= hw->cmb_rrd; + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH); + value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16); + iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER); + iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER); - /* re-enable Interrupt */ - iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); - return IRQ_HANDLED; -} + /* --- enable CMB / SMB */ + value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN; + iowrite32(value, hw->hw_addr + REG_CSMB_CTRL); -/* - * atl1_watchdog - Timer Call-back - * @data: pointer to netdev cast into an unsigned long - */ -static void atl1_watchdog(unsigned long data) -{ - struct atl1_adapter *adapter = (struct atl1_adapter *)data; + value = ioread32(adapter->hw.hw_addr + REG_ISR); + if (unlikely((value & ISR_PHY_LINKDOWN) != 0)) + value = 1; /* config failed */ + else + value = 0; - /* Reset the timer */ - mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); + /* clear all interrupt status */ + iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR); + iowrite32(0, adapter->hw.hw_addr + REG_ISR); + return value; } /* - * atl1_phy_config - Timer Call-back - * @data: pointer to netdev cast into an unsigned long + * atl1_pcie_patch - Patch for PCIE module */ -static void atl1_phy_config(unsigned long data) +static void atl1_pcie_patch(struct atl1_adapter *adapter) { - struct atl1_adapter *adapter = (struct atl1_adapter *)data; - struct atl1_hw *hw = &adapter->hw; - unsigned long flags; + u32 value; - spin_lock_irqsave(&adapter->lock, flags); - adapter->phy_timer_pending = false; - atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); - atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); - atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); - spin_unlock_irqrestore(&adapter->lock, flags); + /* much vendor magic here */ + value = 0x6500; + iowrite32(value, adapter->hw.hw_addr + 0x12FC); + /* pcie flow control mode change */ + value = ioread32(adapter->hw.hw_addr + 0x1008); + value |= 0x8000; + iowrite32(value, adapter->hw.hw_addr + 0x1008); } /* - * Orphaned vendor comment left intact here: - * - * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT - * will assert. We do soft reset <0x1400=1> according - * with the SPEC. BUT, it seemes that PCIE or DMA - * state-machine will not be reset. DMAR_TO_INT will - * assert again and again. - * + * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400 + * on PCI Command register is disable. + * The function enable this bit. + * Brackett, 2006/03/15 */ - -static int atl1_reset(struct atl1_adapter *adapter) +static void atl1_via_workaround(struct atl1_adapter *adapter) { - int ret; - ret = atl1_reset_hw(&adapter->hw); - if (ret) - return ret; - return atl1_init_hw(&adapter->hw); + unsigned long value; + + value = ioread16(adapter->hw.hw_addr + PCI_COMMAND); + if (value & PCI_COMMAND_INTX_DISABLE) + value &= ~PCI_COMMAND_INTX_DISABLE; + iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND); } -static s32 atl1_up(struct atl1_adapter *adapter) +static void atl1_inc_smb(struct atl1_adapter *adapter) { - struct net_device *netdev = adapter->netdev; - int err; - int irq_flags = IRQF_SAMPLE_RANDOM; + struct stats_msg_block *smb = adapter->smb.smb; - /* hardware has been reset, we need to reload some things */ - atlx_set_multi(netdev); - atl1_init_ring_ptrs(adapter); - atlx_restore_vlan(adapter); - err = atl1_alloc_rx_buffers(adapter); - if (unlikely(!err)) - /* no RX BUFFER allocated */ - return -ENOMEM; + /* Fill out the OS statistics structure */ + adapter->soft_stats.rx_packets += smb->rx_ok; + adapter->soft_stats.tx_packets += smb->tx_ok; + adapter->soft_stats.rx_bytes += smb->rx_byte_cnt; + adapter->soft_stats.tx_bytes += smb->tx_byte_cnt; + adapter->soft_stats.multicast += smb->rx_mcast; + adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 + + smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry); - if (unlikely(atl1_configure(adapter))) { - err = -EIO; - goto err_up; - } + /* Rx Errors */ + adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err + + smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov + + smb->rx_rrd_ov + smb->rx_align_err); + adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov; + adapter->soft_stats.rx_length_errors += smb->rx_len_err; + adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err; + adapter->soft_stats.rx_frame_errors += smb->rx_align_err; + adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov + + smb->rx_rxf_ov); - err = pci_enable_msi(adapter->pdev); - if (err) { - if (netif_msg_ifup(adapter)) - dev_info(&adapter->pdev->dev, - "Unable to enable MSI: %d\n", err); - irq_flags |= IRQF_SHARED; - } + adapter->soft_stats.rx_pause += smb->rx_pause; + adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov; + adapter->soft_stats.rx_trunc += smb->rx_sz_ov; - err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, - netdev->name, netdev); - if (unlikely(err)) - goto err_up; + /* Tx Errors */ + adapter->soft_stats.tx_errors += (smb->tx_late_col + + smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc); + adapter->soft_stats.tx_fifo_errors += smb->tx_underrun; + adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col; + adapter->soft_stats.tx_window_errors += smb->tx_late_col; - mod_timer(&adapter->watchdog_timer, jiffies); - atlx_irq_enable(adapter); - atl1_check_link(adapter); - return 0; + adapter->soft_stats.excecol += smb->tx_abort_col; + adapter->soft_stats.deffer += smb->tx_defer; + adapter->soft_stats.scc += smb->tx_1_col; + adapter->soft_stats.mcc += smb->tx_2_col; + adapter->soft_stats.latecol += smb->tx_late_col; + adapter->soft_stats.tx_underun += smb->tx_underrun; + adapter->soft_stats.tx_trunc += smb->tx_trunc; + adapter->soft_stats.tx_pause += smb->tx_pause; -err_up: - pci_disable_msi(adapter->pdev); - /* free rx_buffers */ - atl1_clean_rx_ring(adapter); - return err; + adapter->net_stats.rx_packets = adapter->soft_stats.rx_packets; + adapter->net_stats.tx_packets = adapter->soft_stats.tx_packets; + adapter->net_stats.rx_bytes = adapter->soft_stats.rx_bytes; + adapter->net_stats.tx_bytes = adapter->soft_stats.tx_bytes; + adapter->net_stats.multicast = adapter->soft_stats.multicast; + adapter->net_stats.collisions = adapter->soft_stats.collisions; + adapter->net_stats.rx_errors = adapter->soft_stats.rx_errors; + adapter->net_stats.rx_over_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.rx_length_errors = + adapter->soft_stats.rx_length_errors; + adapter->net_stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors; + adapter->net_stats.rx_frame_errors = + adapter->soft_stats.rx_frame_errors; + adapter->net_stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors; + adapter->net_stats.rx_missed_errors = + adapter->soft_stats.rx_missed_errors; + adapter->net_stats.tx_errors = adapter->soft_stats.tx_errors; + adapter->net_stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors; + adapter->net_stats.tx_aborted_errors = + adapter->soft_stats.tx_aborted_errors; + adapter->net_stats.tx_window_errors = + adapter->soft_stats.tx_window_errors; + adapter->net_stats.tx_carrier_errors = + adapter->soft_stats.tx_carrier_errors; } -static void atl1_down(struct atl1_adapter *adapter) +static void atl1_update_mailbox(struct atl1_adapter *adapter) { - struct net_device *netdev = adapter->netdev; + unsigned long flags; + u32 tpd_next_to_use; + u32 rfd_next_to_use; + u32 rrd_next_to_clean; + u32 value; - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_config_timer); - adapter->phy_timer_pending = false; + spin_lock_irqsave(&adapter->mb_lock, flags); - atlx_irq_disable(adapter); - free_irq(adapter->pdev->irq, netdev); - pci_disable_msi(adapter->pdev); - atl1_reset_hw(&adapter->hw); - adapter->cmb.cmb->int_stats = 0; + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean); - adapter->link_speed = SPEED_0; - adapter->link_duplex = -1; - netif_carrier_off(netdev); - netif_stop_queue(netdev); + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); - atl1_clean_tx_ring(adapter); - atl1_clean_rx_ring(adapter); + spin_unlock_irqrestore(&adapter->mb_lock, flags); } -static void atl1_tx_timeout_task(struct work_struct *work) +static void atl1_clean_alloc_flag(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, u16 offset) { - struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); - struct net_device *netdev = adapter->netdev; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; - netif_device_detach(netdev); - atl1_down(adapter); - atl1_up(adapter); - netif_device_attach(netdev); + while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) { + rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0; + if (++rfd_ring->next_to_clean == rfd_ring->count) { + rfd_ring->next_to_clean = 0; + } + } } -/* - * atl1_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - */ -static int atl1_change_mtu(struct net_device *netdev, int new_mtu) +static void atl1_update_rfd_index(struct atl1_adapter *adapter, + struct rx_return_desc *rrd) { - struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - - adapter->hw.max_frame_size = max_frame; - adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; - adapter->rx_buffer_len = (max_frame + 7) & ~7; - adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; - - netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { - atl1_down(adapter); - atl1_up(adapter); - } + u16 num_buf; - return 0; + num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) / + adapter->rx_buffer_len; + if (rrd->num_buf == num_buf) + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, num_buf); } -/* - * atl1_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - */ -static int atl1_open(struct net_device *netdev) +static void atl1_rx_checksum(struct atl1_adapter *adapter, + struct rx_return_desc *rrd, struct sk_buff *skb) { - struct atl1_adapter *adapter = netdev_priv(netdev); - int err; + struct pci_dev *pdev = adapter->pdev; - /* allocate transmit descriptors */ - err = atl1_setup_ring_resources(adapter); - if (err) - return err; + skb->ip_summed = CHECKSUM_NONE; - err = atl1_up(adapter); - if (err) - goto err_up; + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | + ERR_FLAG_CODE | ERR_FLAG_OV)) { + adapter->hw_csum_err++; + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "rx checksum error\n"); + return; + } + } - return 0; + /* not IPv4 */ + if (!(rrd->pkt_flg & PACKET_FLAG_IPV4)) + /* checksum is invalid, but it's not an IPv4 pkt, so ok */ + return; -err_up: - atl1_reset(adapter); - return err; + /* IPv4 packet */ + if (likely(!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + adapter->hw_csum_good++; + return; + } + + /* IPv4, but hardware thinks its checksum is wrong */ + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); + adapter->hw_csum_err++; + return; } /* - * atl1_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. + * atl1_alloc_rx_buffers - Replace used receive buffers + * @adapter: address of board private structure */ -static int atl1_close(struct net_device *netdev) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - atl1_down(adapter); - atl1_free_ring_resources(adapter); - return 0; -} - -#ifdef CONFIG_PM -static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) +static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter) { - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u32 ctrl = 0; - u32 wufc = adapter->wol; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct pci_dev *pdev = adapter->pdev; + struct page *page; + unsigned long offset; + struct atl1_buffer *buffer_info, *next_info; + struct sk_buff *skb; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct rx_free_desc *rfd_desc; - netif_device_detach(netdev); - if (netif_running(netdev)) - atl1_down(adapter); + next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use); + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); - if (ctrl & BMSR_LSTATUS) - wufc &= ~ATLX_WUFC_LNKC; + while (!buffer_info->alloced && !next_info->alloced) { + if (buffer_info->skb) { + buffer_info->alloced = 1; + goto next; + } - /* reduce speed to 10/100M */ - if (wufc) { - atl1_phy_enter_power_saving(hw); - /* if resume, let driver to re- setup link */ - hw->phy_configured = false; - atl1_set_mac_addr(hw); - atlx_set_multi(netdev); + rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use); - ctrl = 0; - /* turn on magic packet wol */ - if (wufc & ATLX_WUFC_MAG) - ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->net_stats.rx_dropped++; + break; + } - /* turn on Link change WOL */ - if (wufc & ATLX_WUFC_LNKC) - ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); - iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); - /* turn on all-multi mode if wake on multicast is enabled */ - ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); - ctrl &= ~MAC_CTRL_DBG; - ctrl &= ~MAC_CTRL_PROMIS_EN; - if (wufc & ATLX_WUFC_MC) - ctrl |= MAC_CTRL_MC_ALL_EN; - else - ctrl &= ~MAC_CTRL_MC_ALL_EN; + buffer_info->alloced = 1; + buffer_info->skb = skb; + buffer_info->length = (u16) adapter->rx_buffer_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(pdev, page, offset, + adapter->rx_buffer_len, + PCI_DMA_FROMDEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len); + rfd_desc->coalese = 0; - /* turn on broadcast mode if wake on-BC is enabled */ - if (wufc & ATLX_WUFC_BC) - ctrl |= MAC_CTRL_BC_EN; - else - ctrl &= ~MAC_CTRL_BC_EN; +next: + rfd_next_to_use = next_next; + if (unlikely(++next_next == rfd_ring->count)) + next_next = 0; - /* enable RX */ - ctrl |= MAC_CTRL_RX_EN; - iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - iowrite32(0, hw->hw_addr + REG_WOL_CTRL); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; } - pci_save_state(pdev); - pci_disable_device(pdev); - - pci_set_power_state(pdev, PCI_D3hot); - - return 0; + if (num_alloc) { + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use); + } + return num_alloc; } -static int atl1_resume(struct pci_dev *pdev) +static void atl1_intr_rx(struct atl1_adapter *adapter) { - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter = netdev_priv(netdev); - u32 err; + int i, count; + u16 length; + u16 rrd_next_to_clean; + u32 value; + struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring; + struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring; + struct atl1_buffer *buffer_info; + struct rx_return_desc *rrd; + struct sk_buff *skb; - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); + count = 0; - /* FIXME: check and handle */ - err = pci_enable_device(pdev); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); + rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean); - iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); - atl1_reset(adapter); + while (1) { + rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean); + i = 1; + if (likely(rrd->xsz.valid)) { /* packet valid */ +chk_rrd: + /* check rrd status */ + if (likely(rrd->num_buf == 1)) + goto rrd_ok; + else if (netif_msg_rx_err(adapter)) { + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "unexpected RRD buffer count\n"); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "rx_buf_len = %d\n", + adapter->rx_buffer_len); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD num_buf = %d\n", + rrd->num_buf); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_len = %d\n", + rrd->xsz.xsum_sz.pkt_size); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD pkt_flg = 0x%08X\n", + rrd->pkt_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD err_flg = 0x%08X\n", + rrd->err_flg); + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "RRD vlan_tag = 0x%08X\n", + rrd->vlan_tag); + } - if (netif_running(netdev)) - atl1_up(adapter); - netif_device_attach(netdev); + /* rrd seems to be bad */ + if (unlikely(i-- > 0)) { + /* rrd may not be DMAed completely */ + udelay(1); + goto chk_rrd; + } + /* bad rrd */ + if (netif_msg_rx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "bad RRD\n"); + /* see if update RFD index */ + if (rrd->num_buf > 1) + atl1_update_rfd_index(adapter, rrd); - atl1_via_workaround(adapter); + /* update rrd */ + rrd->xsz.valid = 0; + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; + continue; + } else { /* current rrd still not be updated */ - return 0; -} -#else -#define atl1_suspend NULL -#define atl1_resume NULL -#endif + break; + } +rrd_ok: + /* clean alloc flag for bad rrd */ + atl1_clean_alloc_flag(adapter, rrd, 0); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void atl1_poll_controller(struct net_device *netdev) -{ - disable_irq(netdev->irq); - atl1_intr(netdev->irq, netdev); - enable_irq(netdev->irq); -} -#endif + buffer_info = &rfd_ring->buffer_info[rrd->buf_indx]; + if (++rfd_ring->next_to_clean == rfd_ring->count) + rfd_ring->next_to_clean = 0; -/* - * atl1_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in atl1_pci_tbl - * - * Returns 0 on success, negative on failure - * - * atl1_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - */ -static int __devinit atl1_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct atl1_adapter *adapter; - static int cards_found = 0; - int err; + /* update rrd next to clean */ + if (++rrd_next_to_clean == rrd_ring->count) + rrd_next_to_clean = 0; + count++; - err = pci_enable_device(pdev); - if (err) - return err; + if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { + if (!(rrd->err_flg & + (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM + | ERR_FLAG_LEN))) { + /* packet error, don't need upstream */ + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + continue; + } + } - /* - * The atl1 chip can DMA to 64-bit addresses, but it uses a single - * shared register for the high 32 bits, so only a single, aligned, - * 4 GB physical address range can be used at a time. - * - * Supporting 64-bit DMA on this hardware is more trouble than it's - * worth. It is far easier to limit to 32-bit DMA than update - * various kernel subsystems to support the mechanics required by a - * fixed-high-32-bit system. - */ - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_dma; - } - /* - * Mark all PCI regions associated with PCI device - * pdev as being reserved by owner atl1_driver_name - */ - err = pci_request_regions(pdev, ATLX_DRIVER_NAME); - if (err) - goto err_request_regions; + /* Good Receive */ + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + skb = buffer_info->skb; + length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); - /* - * Enables bus-mastering on the device and calls - * pcibios_set_master to do the needed arch specific settings - */ - pci_set_master(pdev); + skb_put(skb, length - ETH_FCS_LEN); - netdev = alloc_etherdev(sizeof(struct atl1_adapter)); - if (!netdev) { - err = -ENOMEM; - goto err_alloc_etherdev; + /* Receive Checksum Offload */ + atl1_rx_checksum(adapter, rrd, skb); + skb->protocol = eth_type_trans(skb, adapter->netdev); + + if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) { + u16 vlan_tag = (rrd->vlan_tag >> 4) | + ((rrd->vlan_tag & 7) << 13) | + ((rrd->vlan_tag & 8) << 9); + vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag); + } else + netif_rx(skb); + + /* let protocol layer free skb */ + buffer_info->skb = NULL; + buffer_info->alloced = 0; + rrd->xsz.valid = 0; + + adapter->netdev->last_rx = jiffies; } - SET_NETDEV_DEV(netdev, &pdev->dev); - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - adapter->hw.back = adapter; - adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); + atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean); - adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); - if (!adapter->hw.hw_addr) { - err = -EIO; - goto err_pci_iomap; - } - /* get device revision number */ - adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + - (REG_MASTER_CTRL + 2)); - if (netif_msg_probe(adapter)) - dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); + atl1_alloc_rx_buffers(adapter); - /* set default ring resource counts */ - adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; - adapter->tpd_ring.count = ATL1_DEFAULT_TPD; + /* update mailbox ? */ + if (count) { + u32 tpd_next_to_use; + u32 rfd_next_to_use; - adapter->mii.dev = netdev; - adapter->mii.mdio_read = mdio_read; - adapter->mii.mdio_write = mdio_write; - adapter->mii.phy_id_mask = 0x1f; - adapter->mii.reg_num_mask = 0x1f; + spin_lock(&adapter->mb_lock); - netdev->open = &atl1_open; - netdev->stop = &atl1_close; - netdev->hard_start_xmit = &atl1_xmit_frame; - netdev->get_stats = &atlx_get_stats; - netdev->set_multicast_list = &atlx_set_multi; - netdev->set_mac_address = &atl1_set_mac; - netdev->change_mtu = &atl1_change_mtu; - netdev->do_ioctl = &atlx_ioctl; - netdev->tx_timeout = &atlx_tx_timeout; - netdev->watchdog_timeo = 5 * HZ; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = atl1_poll_controller; -#endif - netdev->vlan_rx_register = atlx_vlan_rx_register; + tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use); + rfd_next_to_use = + atomic_read(&adapter->rfd_ring.next_to_use); + rrd_next_to_clean = + atomic_read(&adapter->rrd_ring.next_to_clean); + value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) << + MB_RFD_PROD_INDX_SHIFT) | + ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) << + MB_RRD_CONS_INDX_SHIFT) | + ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) << + MB_TPD_PROD_INDX_SHIFT); + iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX); + spin_unlock(&adapter->mb_lock); + } +} - netdev->ethtool_ops = &atl1_ethtool_ops; - adapter->bd_number = cards_found; +static void atl1_intr_tx(struct atl1_adapter *adapter) +{ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 sw_tpd_next_to_clean; + u16 cmb_tpd_next_to_clean; - /* setup the private structure */ - err = atl1_sw_init(adapter); - if (err) - goto err_common; + sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean); + cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx); - netdev->features = NETIF_F_HW_CSUM; - netdev->features |= NETIF_F_SG; - netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); - netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_LLTX; + while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) { + struct tx_packet_desc *tpd; - /* - * patch for some L1 of old version, - * the final version of L1 may not need these - * patches - */ - /* atl1_pcie_patch(adapter); */ + tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean); + buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean]; + if (buffer_info->dma) { + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } - /* really reset GPHY core */ - iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + if (buffer_info->skb) { + dev_kfree_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } - /* - * reset the controller to - * put the device in a known good starting state - */ - if (atl1_reset_hw(&adapter->hw)) { - err = -EIO; - goto err_common; + if (++sw_tpd_next_to_clean == tpd_ring->count) + sw_tpd_next_to_clean = 0; } + atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean); - /* copy the MAC address out of the EEPROM */ - atl1_read_mac_addr(&adapter->hw); - memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + if (netif_queue_stopped(adapter->netdev) + && netif_carrier_ok(adapter->netdev)) + netif_wake_queue(adapter->netdev); +} - if (!is_valid_ether_addr(netdev->dev_addr)) { - err = -EIO; - goto err_common; - } +static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring) +{ + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 next_to_use = atomic_read(&tpd_ring->next_to_use); + return ((next_to_clean > next_to_use) ? + next_to_clean - next_to_use - 1 : + tpd_ring->count + next_to_clean - next_to_use - 1); +} - atl1_check_options(adapter); +static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + /* spinlock held */ + u8 hdr_len, ip_off; + u32 real_len; + int err; - /* pre-init the MAC, and setup link */ - err = atl1_init_hw(&adapter->hw); - if (err) { - err = -EIO; - goto err_common; + if (skb_shinfo(skb)->gso_size) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return -1; + } + + if (skb->protocol == ntohs(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + + real_len = (((unsigned char *)iph - skb->data) + + ntohs(iph->tot_len)); + if (real_len < skb->len) + pskb_trim(skb, real_len); + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (skb->len == hdr_len) { + iph->check = 0; + tcp_hdr(skb)->check = + ~csum_tcpudp_magic(iph->saddr, + iph->daddr, tcp_hdrlen(skb), + IPPROTO_TCP, 0); + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << + TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT; + ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT; + return 1; + } + + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, IPPROTO_TCP, 0); + ip_off = (unsigned char *)iph - + (unsigned char *) skb_network_header(skb); + if (ip_off == 8) /* 802.3-SNAP frame */ + ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; + else if (ip_off != 0) + return -2; + + ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) << + TPD_IPHL_SHIFT; + ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT; + ptpd->word3 |= (skb_shinfo(skb)->gso_size & + TPD_MSS_MASK) << TPD_MSS_SHIFT; + ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; + return 3; + } } + return false; +} - atl1_pcie_patch(adapter); - /* assume we have no link for now */ - netif_carrier_off(netdev); - netif_stop_queue(netdev); +static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + u8 css, cso; - init_timer(&adapter->watchdog_timer); - adapter->watchdog_timer.function = &atl1_watchdog; - adapter->watchdog_timer.data = (unsigned long)adapter; + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + css = (u8) (skb->csum_start - skb_headroom(skb)); + cso = css + (u8) skb->csum_offset; + if (unlikely(css & 0x1)) { + /* L1 hardware requires an even number here */ + if (netif_msg_tx_err(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "payload offset not an even number\n"); + return -1; + } + ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) << + TPD_CCSUMOFFSET_SHIFT; + ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT; + return true; + } + return 0; +} - init_timer(&adapter->phy_config_timer); - adapter->phy_config_timer.function = &atl1_phy_config; - adapter->phy_config_timer.data = (unsigned long)adapter; - adapter->phy_timer_pending = false; +static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb, + struct tx_packet_desc *ptpd) +{ + /* spinlock held */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + u16 buf_len = skb->len; + struct page *page; + unsigned long offset; + unsigned int nr_frags; + unsigned int f; + int retval; + u16 next_to_use; + u16 data_len; + u8 hdr_len; - INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); + buf_len -= skb->data_len; + nr_frags = skb_shinfo(skb)->nr_frags; + next_to_use = atomic_read(&tpd_ring->next_to_use); + buffer_info = &tpd_ring->buffer_info[next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + /* put skb in last TPD */ + buffer_info->skb = NULL; - INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); + retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; + if (retval) { + /* TSO */ + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + buffer_info->length = hdr_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, hdr_len, + PCI_DMA_TODEVICE); - INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; - err = register_netdev(netdev); - if (err) - goto err_common; + if (buf_len > hdr_len) { + int i, nseg; - cards_found++; - atl1_via_workaround(adapter); - return 0; + data_len = buf_len - hdr_len; + nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < nseg; i++) { + buffer_info = + &tpd_ring->buffer_info[next_to_use]; + buffer_info->skb = NULL; + buffer_info->length = + (ATL1_MAX_TX_BUF_LEN >= + data_len) ? ATL1_MAX_TX_BUF_LEN : data_len; + data_len -= buffer_info->length; + page = virt_to_page(skb->data + + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)); + offset = (unsigned long)(skb->data + + (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) & + ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, + page, offset, buffer_info->length, + PCI_DMA_TODEVICE); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + } + } else { + /* not TSO */ + buffer_info->length = buf_len; + page = virt_to_page(skb->data); + offset = (unsigned long)skb->data & ~PAGE_MASK; + buffer_info->dma = pci_map_page(adapter->pdev, page, + offset, buf_len, PCI_DMA_TODEVICE); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } -err_common: - pci_iounmap(pdev, adapter->hw.hw_addr); -err_pci_iomap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_regions(pdev); -err_dma: -err_request_regions: - pci_disable_device(pdev); - return err; -} + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + u16 i, nseg; -/* - * atl1_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * atl1_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - */ -static void __devexit atl1_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct atl1_adapter *adapter; - /* Device not available. Return. */ - if (!netdev) - return; + frag = &skb_shinfo(skb)->frags[f]; + buf_len = frag->size; - adapter = netdev_priv(netdev); + nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + for (i = 0; i < nseg; i++) { + buffer_info = &tpd_ring->buffer_info[next_to_use]; + if (unlikely(buffer_info->skb)) + BUG(); + buffer_info->skb = NULL; + buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ? + ATL1_MAX_TX_BUF_LEN : buf_len; + buf_len -= buffer_info->length; + buffer_info->dma = pci_map_page(adapter->pdev, + frag->page, + frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN), + buffer_info->length, PCI_DMA_TODEVICE); - /* - * Some atl1 boards lack persistent storage for their MAC, and get it - * from the BIOS during POST. If we've been messing with the MAC - * address, we need to save the permanent one. - */ - if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { - memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, - ETH_ALEN); - atl1_set_mac_addr(&adapter->hw); + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } } - iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); - unregister_netdev(netdev); - pci_iounmap(pdev, adapter->hw.hw_addr); - pci_release_regions(pdev); - free_netdev(netdev); - pci_disable_device(pdev); + /* last tpd's buffer-info */ + buffer_info->skb = skb; } -static struct pci_driver atl1_driver = { - .name = ATLX_DRIVER_NAME, - .id_table = atl1_pci_tbl, - .probe = atl1_probe, - .remove = __devexit_p(atl1_remove), - .suspend = atl1_suspend, - .resume = atl1_resume -}; - -/* - * atl1_exit_module - Driver Exit Cleanup Routine - * - * atl1_exit_module is called just before the driver is removed - * from memory. - */ -static void __exit atl1_exit_module(void) +static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, + struct tx_packet_desc *ptpd) { - pci_unregister_driver(&atl1_driver); -} + /* spinlock held */ + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + struct atl1_buffer *buffer_info; + struct tx_packet_desc *tpd; + u16 j; + u32 val; + u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use); -/* - * atl1_init_module - Driver Registration Routine - * - * atl1_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - */ -static int __init atl1_init_module(void) -{ - return pci_register_driver(&atl1_driver); -} + for (j = 0; j < count; j++) { + buffer_info = &tpd_ring->buffer_info[next_to_use]; + tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use); + if (tpd != ptpd) + memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); + tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + tpd->word2 = (cpu_to_le16(buffer_info->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; -module_init(atl1_init_module); -module_exit(atl1_exit_module); + /* + * if this is the first packet in a TSO chain, set + * TPD_HDRFLAG, otherwise, clear it. + */ + val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & + TPD_SEGMENT_EN_MASK; + if (val) { + if (!j) + tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; + else + tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT); + } -struct atl1_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; -}; + if (j == (count - 1)) + tpd->word3 |= 1 << TPD_EOP_SHIFT; -#define ATL1_STAT(m) \ - sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) + if (++next_to_use == tpd_ring->count) + next_to_use = 0; + } + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); -static struct atl1_stats atl1_gstrings_stats[] = { - {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, - {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, - {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, - {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, - {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, - {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, - {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, - {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, - {"multicast", ATL1_STAT(soft_stats.multicast)}, - {"collisions", ATL1_STAT(soft_stats.collisions)}, - {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, - {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, - {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, - {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, - {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, - {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, - {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, - {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, - {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, - {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, - {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, - {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, - {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, - {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, - {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, - {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, - {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, - {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, - {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, - {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} -}; + atomic_set(&tpd_ring->next_to_use, next_to_use); +} -static void atl1_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, u64 *data) +static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct atl1_adapter *adapter = netdev_priv(netdev); - int i; - char *p; + struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring; + int len = skb->len; + int tso; + int count = 1; + int ret_val; + struct tx_packet_desc *ptpd; + u16 frag_size; + u16 vlan_tag; + unsigned long flags; + unsigned int nr_frags = 0; + unsigned int mss = 0; + unsigned int f; + unsigned int proto_hdr_len; + + len -= skb->data_len; + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; - data[i] = (atl1_gstrings_stats[i].sizeof_stat == - sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + nr_frags = skb_shinfo(skb)->nr_frags; + for (f = 0; f < nr_frags; f++) { + frag_size = skb_shinfo(skb)->frags[f].size; + if (frag_size) + count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; } -} + mss = skb_shinfo(skb)->gso_size; + if (mss) { + if (skb->protocol == ntohs(ETH_P_IP)) { + proto_hdr_len = (skb_transport_offset(skb) + + tcp_hdrlen(skb)); + if (unlikely(proto_hdr_len > len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* need additional TPD ? */ + if (proto_hdr_len != len) + count += (len - proto_hdr_len + + ATL1_MAX_TX_BUF_LEN - 1) / + ATL1_MAX_TX_BUF_LEN; + } + } -static int atl1_get_sset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(atl1_gstrings_stats); - default: - return -EOPNOTSUPP; + if (!spin_trylock_irqsave(&adapter->lock, flags)) { + /* Can't get lock - tell upper layer to requeue */ + if (netif_msg_tx_queued(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "tx locked\n"); + return NETDEV_TX_LOCKED; } -} -static int atl1_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; + if (atl1_tpd_avail(&adapter->tpd_ring) < count) { + /* not enough descriptors */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->lock, flags); + if (netif_msg_tx_queued(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "tx busy\n"); + return NETDEV_TX_BUSY; + } - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | SUPPORTED_TP); - ecmd->advertising = ADVERTISED_TP; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - ecmd->advertising |= ADVERTISED_Autoneg; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { - ecmd->advertising |= ADVERTISED_Autoneg; - ecmd->advertising |= - (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full); - } else - ecmd->advertising |= (ADVERTISED_1000baseT_Full); + ptpd = ATL1_TPD_DESC(tpd_ring, + (u16) atomic_read(&tpd_ring->next_to_use)); + memset(ptpd, 0, sizeof(struct tx_packet_desc)); + + if (adapter->vlgrp && vlan_tx_tag_present(skb)) { + vlan_tag = vlan_tx_tag_get(skb); + vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | + ((vlan_tag >> 9) & 0x8); + ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; + ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << + TPD_VL_TAGGED_SHIFT; } - ecmd->port = PORT_TP; - ecmd->phy_address = 0; - ecmd->transceiver = XCVR_INTERNAL; - if (netif_carrier_ok(adapter->netdev)) { - u16 link_speed, link_duplex; - atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); - ecmd->speed = link_speed; - if (link_duplex == FULL_DUPLEX) - ecmd->duplex = DUPLEX_FULL; - else - ecmd->duplex = DUPLEX_HALF; - } else { - ecmd->speed = -1; - ecmd->duplex = -1; + tso = atl1_tso(adapter, skb, ptpd); + if (tso < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - ecmd->autoneg = AUTONEG_ENABLE; - else - ecmd->autoneg = AUTONEG_DISABLE; - return 0; + if (!tso) { + ret_val = atl1_tx_csum(adapter, skb, ptpd); + if (ret_val < 0) { + spin_unlock_irqrestore(&adapter->lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } + + atl1_tx_map(adapter, skb, ptpd); + atl1_tx_queue(adapter, count, ptpd); + atl1_update_mailbox(adapter); + spin_unlock_irqrestore(&adapter->lock, flags); + netdev->trans_start = jiffies; + return NETDEV_TX_OK; } -static int atl1_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) +/* + * atl1_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1_intr(int irq, void *data) { - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - u16 phy_data; - int ret_val = 0; - u16 old_media_type = hw->media_type; + struct atl1_adapter *adapter = netdev_priv(data); + u32 status; + u8 update_rx; + int max_ints = 10; - if (netif_running(adapter->netdev)) { - if (netif_msg_link(adapter)) - dev_dbg(&adapter->pdev->dev, - "ethtool shutting down adapter\n"); - atl1_down(adapter); - } + status = adapter->cmb.cmb->int_stats; + if (!status) + return IRQ_NONE; - if (ecmd->autoneg == AUTONEG_ENABLE) - hw->media_type = MEDIA_TYPE_AUTO_SENSOR; - else { - if (ecmd->speed == SPEED_1000) { - if (ecmd->duplex != DUPLEX_FULL) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, - "1000M half is invalid\n"); - ret_val = -EINVAL; - goto exit_sset; + update_rx = 0; + + do { + /* clear CMB interrupt status at once */ + adapter->cmb.cmb->int_stats = 0; + + if (status & ISR_GPHY) /* clear phy status */ + atlx_clear_phy_int(adapter); + + /* clear ISR status, and Enable CMB DMA/Disable Interrupt */ + iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR); + + /* check if SMB intr */ + if (status & ISR_SMB) + atl1_inc_smb(adapter); + + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie phy link down %x\n", status); + if (netif_running(adapter->netdev)) { /* reset MAC */ + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; } - hw->media_type = MEDIA_TYPE_1000M_FULL; - } else if (ecmd->speed == SPEED_100) { - if (ecmd->duplex == DUPLEX_FULL) - hw->media_type = MEDIA_TYPE_100M_FULL; - else - hw->media_type = MEDIA_TYPE_100M_HALF; - } else { - if (ecmd->duplex == DUPLEX_FULL) - hw->media_type = MEDIA_TYPE_10M_FULL; - else - hw->media_type = MEDIA_TYPE_10M_HALF; } - } - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - ecmd->advertising = - ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - case MEDIA_TYPE_1000M_FULL: - ecmd->advertising = - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | ADVERTISED_TP; - break; - default: - ecmd->advertising = 0; - break; - } - if (atl1_phy_setup_autoneg_adv(hw)) { - ret_val = -EINVAL; - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, - "invalid ethtool speed/duplex setting\n"); - goto exit_sset; - } - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: - /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; + + /* check if DMA read/write error ? */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, &adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); + iowrite32(0, adapter->hw.hw_addr + REG_IMR); + schedule_work(&adapter->pcie_dma_to_rst_task); + return IRQ_HANDLED; } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); -exit_sset: - if (ret_val) - hw->media_type = old_media_type; - if (netif_running(adapter->netdev)) { - if (netif_msg_link(adapter)) - dev_dbg(&adapter->pdev->dev, - "ethtool starting adapter\n"); - atl1_up(adapter); - } else if (!ret_val) { - if (netif_msg_link(adapter)) - dev_dbg(&adapter->pdev->dev, - "ethtool resetting adapter\n"); - atl1_reset(adapter); - } - return ret_val; -} + /* link event */ + if (status & ISR_GPHY) { + adapter->soft_stats.tx_carrier_errors++; + atl1_check_for_link(adapter); + } -static void atl1_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); + /* transmit event */ + if (status & ISR_CMB_TX) + atl1_intr_tx(adapter); - strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); - strncpy(drvinfo->version, ATLX_DRIVER_VERSION, - sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), - sizeof(drvinfo->bus_info)); - drvinfo->eedump_len = ATL1_EEDUMP_LEN; -} + /* rx exception */ + if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV | ISR_CMB_RX))) { + if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV)) + if (netif_msg_intr(adapter)) + dev_printk(KERN_DEBUG, + &adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", + status); + atl1_intr_rx(adapter); + } -static void atl1_get_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); + if (--max_ints < 0) + break; - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; - if (adapter->wol & ATLX_WUFC_MAG) - wol->wolopts |= WAKE_MAGIC; - return; + } while ((status = adapter->cmb.cmb->int_stats)); + + /* re-enable Interrupt */ + iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR); + return IRQ_HANDLED; } -static int atl1_set_wol(struct net_device *netdev, - struct ethtool_wolinfo *wol) +/* + * atl1_watchdog - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_watchdog(unsigned long data) { - struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_adapter *adapter = (struct atl1_adapter *)data; - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) - return -EOPNOTSUPP; - adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; - if (wol->wolopts & WAKE_MAGIC) - adapter->wol |= ATLX_WUFC_MAG; - return 0; + /* Reset the timer */ + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } -static u32 atl1_get_msglevel(struct net_device *netdev) +/* + * atl1_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1_phy_config(unsigned long data) { - struct atl1_adapter *adapter = netdev_priv(netdev); - return adapter->msg_enable; -} + struct atl1_adapter *adapter = (struct atl1_adapter *)data; + struct atl1_hw *hw = &adapter->hw; + unsigned long flags; -static void atl1_set_msglevel(struct net_device *netdev, u32 value) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - adapter->msg_enable = value; + spin_lock_irqsave(&adapter->lock, flags); + adapter->phy_timer_pending = false; + atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg); + atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN); + spin_unlock_irqrestore(&adapter->lock, flags); } -static int atl1_get_regs_len(struct net_device *netdev) -{ - return ATL1_REG_COUNT * sizeof(u32); -} +/* + * Orphaned vendor comment left intact here: + * + * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT + * will assert. We do soft reset <0x1400=1> according + * with the SPEC. BUT, it seemes that PCIE or DMA + * state-machine will not be reset. DMAR_TO_INT will + * assert again and again. + * + */ -static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, - void *p) +static int atl1_reset(struct atl1_adapter *adapter) { - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; - unsigned int i; - u32 *regbuf = p; - - for (i = 0; i < ATL1_REG_COUNT; i++) { - /* - * This switch statement avoids reserved regions - * of register space. - */ - switch (i) { - case 6 ... 9: - case 14: - case 29 ... 31: - case 34 ... 63: - case 75 ... 127: - case 136 ... 1023: - case 1027 ... 1087: - case 1091 ... 1151: - case 1194 ... 1195: - case 1200 ... 1201: - case 1206 ... 1213: - case 1216 ... 1279: - case 1290 ... 1311: - case 1323 ... 1343: - case 1358 ... 1359: - case 1368 ... 1375: - case 1378 ... 1383: - case 1388 ... 1391: - case 1393 ... 1395: - case 1402 ... 1403: - case 1410 ... 1471: - case 1522 ... 1535: - /* reserved region; don't read it */ - regbuf[i] = 0; - break; - default: - /* unreserved region */ - regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); - } - } + int ret; + ret = atl1_reset_hw(&adapter->hw); + if (ret) + return ret; + return atl1_init_hw(&adapter->hw); } -static void atl1_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) +static s32 atl1_up(struct atl1_adapter *adapter) { - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *txdr = &adapter->tpd_ring; - struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; + struct net_device *netdev = adapter->netdev; + int err; + int irq_flags = IRQF_SAMPLE_RANDOM; - ring->rx_max_pending = ATL1_MAX_RFD; - ring->tx_max_pending = ATL1_MAX_TPD; - ring->rx_mini_max_pending = 0; - ring->rx_jumbo_max_pending = 0; - ring->rx_pending = rxdr->count; - ring->tx_pending = txdr->count; - ring->rx_mini_pending = 0; - ring->rx_jumbo_pending = 0; -} + /* hardware has been reset, we need to reload some things */ + atlx_set_multi(netdev); + atl1_init_ring_ptrs(adapter); + atlx_restore_vlan(adapter); + err = atl1_alloc_rx_buffers(adapter); + if (unlikely(!err)) + /* no RX BUFFER allocated */ + return -ENOMEM; -static int atl1_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; - struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; - struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; + if (unlikely(atl1_configure(adapter))) { + err = -EIO; + goto err_up; + } - struct atl1_tpd_ring tpd_old, tpd_new; - struct atl1_rfd_ring rfd_old, rfd_new; - struct atl1_rrd_ring rrd_old, rrd_new; - struct atl1_ring_header rhdr_old, rhdr_new; - int err; + err = pci_enable_msi(adapter->pdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_info(&adapter->pdev->dev, + "Unable to enable MSI: %d\n", err); + irq_flags |= IRQF_SHARED; + } - tpd_old = adapter->tpd_ring; - rfd_old = adapter->rfd_ring; - rrd_old = adapter->rrd_ring; - rhdr_old = adapter->ring_header; + err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags, + netdev->name, netdev); + if (unlikely(err)) + goto err_up; - if (netif_running(adapter->netdev)) - atl1_down(adapter); + mod_timer(&adapter->watchdog_timer, jiffies); + atlx_irq_enable(adapter); + atl1_check_link(adapter); + return 0; - rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); - rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : - rfdr->count; - rfdr->count = (rfdr->count + 3) & ~3; - rrdr->count = rfdr->count; +err_up: + pci_disable_msi(adapter->pdev); + /* free rx_buffers */ + atl1_clean_rx_ring(adapter); + return err; +} - tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); - tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : - tpdr->count; - tpdr->count = (tpdr->count + 3) & ~3; +static void atl1_down(struct atl1_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; - if (netif_running(adapter->netdev)) { - /* try to get new resources before deleting old */ - err = atl1_setup_ring_resources(adapter); - if (err) - goto err_setup_ring; + del_timer_sync(&adapter->watchdog_timer); + del_timer_sync(&adapter->phy_config_timer); + adapter->phy_timer_pending = false; - /* - * save the new, restore the old in order to free it, - * then restore the new back again - */ + atlx_irq_disable(adapter); + free_irq(adapter->pdev->irq, netdev); + pci_disable_msi(adapter->pdev); + atl1_reset_hw(&adapter->hw); + adapter->cmb.cmb->int_stats = 0; - rfd_new = adapter->rfd_ring; - rrd_new = adapter->rrd_ring; - tpd_new = adapter->tpd_ring; - rhdr_new = adapter->ring_header; - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; - atl1_free_ring_resources(adapter); - adapter->rfd_ring = rfd_new; - adapter->rrd_ring = rrd_new; - adapter->tpd_ring = tpd_new; - adapter->ring_header = rhdr_new; + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + netif_carrier_off(netdev); + netif_stop_queue(netdev); - err = atl1_up(adapter); - if (err) - return err; - } - return 0; + atl1_clean_tx_ring(adapter); + atl1_clean_rx_ring(adapter); +} -err_setup_ring: - adapter->rfd_ring = rfd_old; - adapter->rrd_ring = rrd_old; - adapter->tpd_ring = tpd_old; - adapter->ring_header = rhdr_old; +static void atl1_tx_timeout_task(struct work_struct *work) +{ + struct atl1_adapter *adapter = + container_of(work, struct atl1_adapter, tx_timeout_task); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1_down(adapter); atl1_up(adapter); - return err; + netif_device_attach(netdev); } -static void atl1_get_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) +/* + * atl1_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; } - epause->rx_pause = 1; - epause->tx_pause = 1; + + adapter->hw.max_frame_size = max_frame; + adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; + adapter->rx_buffer_len = (max_frame + 7) & ~7; + adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; + + netdev->mtu = new_mtu; + if ((old_mtu != new_mtu) && netif_running(netdev)) { + atl1_down(adapter); + atl1_up(adapter); + } + + return 0; } -static int atl1_set_pauseparam(struct net_device *netdev, - struct ethtool_pauseparam *epause) +/* + * atl1_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1_open(struct net_device *netdev) { struct atl1_adapter *adapter = netdev_priv(netdev); - struct atl1_hw *hw = &adapter->hw; + int err; - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - epause->autoneg = AUTONEG_ENABLE; - } else { - epause->autoneg = AUTONEG_DISABLE; - } + /* allocate transmit descriptors */ + err = atl1_setup_ring_resources(adapter); + if (err) + return err; - epause->rx_pause = 1; - epause->tx_pause = 1; + err = atl1_up(adapter); + if (err) + goto err_up; return 0; -} -/* FIXME: is this right? -- CHS */ -static u32 atl1_get_rx_csum(struct net_device *netdev) -{ - return 1; +err_up: + atl1_reset(adapter); + return err; } -static void atl1_get_strings(struct net_device *netdev, u32 stringset, - u8 *data) +/* + * atl1_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1_close(struct net_device *netdev) { - u8 *p = data; - int i; - - switch (stringset) { - case ETH_SS_STATS: - for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { - memcpy(p, atl1_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; - } - break; - } + struct atl1_adapter *adapter = netdev_priv(netdev); + atl1_down(adapter); + atl1_free_ring_resources(adapter); + return 0; } -static int atl1_nway_reset(struct net_device *netdev) +#ifdef CONFIG_PM +static int atl1_suspend(struct pci_dev *pdev, pm_message_t state) { + struct net_device *netdev = pci_get_drvdata(pdev); struct atl1_adapter *adapter = netdev_priv(netdev); struct atl1_hw *hw = &adapter->hw; + u32 ctrl = 0; + u32 wufc = adapter->wol; - if (netif_running(netdev)) { - u16 phy_data; + netif_device_detach(netdev); + if (netif_running(netdev)) atl1_down(adapter); - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) { - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - } else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = MII_CR_FULL_DUPLEX | - MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: - /* MEDIA_TYPE_10M_HALF */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - } - } - atl1_write_phy_reg(hw, MII_BMCR, phy_data); - atl1_up(adapter); - } - return 0; -} - -const struct ethtool_ops atl1_ethtool_ops = { - .get_settings = atl1_get_settings, - .set_settings = atl1_set_settings, - .get_drvinfo = atl1_get_drvinfo, - .get_wol = atl1_get_wol, - .set_wol = atl1_set_wol, - .get_msglevel = atl1_get_msglevel, - .set_msglevel = atl1_set_msglevel, - .get_regs_len = atl1_get_regs_len, - .get_regs = atl1_get_regs, - .get_ringparam = atl1_get_ringparam, - .set_ringparam = atl1_set_ringparam, - .get_pauseparam = atl1_get_pauseparam, - .set_pauseparam = atl1_set_pauseparam, - .get_rx_csum = atl1_get_rx_csum, - .set_tx_csum = ethtool_op_set_tx_hw_csum, - .get_link = ethtool_op_get_link, - .set_sg = ethtool_op_set_sg, - .get_strings = atl1_get_strings, - .nway_reset = atl1_nway_reset, - .get_ethtool_stats = atl1_get_ethtool_stats, - .get_sset_count = atl1_get_sset_count, - .set_tso = ethtool_op_set_tso, -}; + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl); + if (ctrl & BMSR_LSTATUS) + wufc &= ~ATLX_WUFC_LNKC; -/* - * Reset the transmit and receive units; mask and clear all interrupts. - * hw - Struct containing variables accessed by shared code - * return : 0 or idle status (if error) - */ -s32 atl1_reset_hw(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - u32 icr; - int i; + /* reduce speed to 10/100M */ + if (wufc) { + atl1_phy_enter_power_saving(hw); + /* if resume, let driver to re- setup link */ + hw->phy_configured = false; + atl1_set_mac_addr(hw); + atlx_set_multi(netdev); - /* - * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events - */ - /* - * iowrite32(0, hw->hw_addr + REG_IMR); - * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); - */ + ctrl = 0; + /* turn on magic packet wol */ + if (wufc & ATLX_WUFC_MAG) + ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; - /* - * Issue Soft Reset to the MAC. This will reset the chip's - * transmit, receive, DMA. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); - ioread32(hw->hw_addr + REG_MASTER_CTRL); + /* turn on Link change WOL */ + if (wufc & ATLX_WUFC_LNKC) + ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN); + iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL); - iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); - ioread16(hw->hw_addr + REG_PHY_ENABLE); + /* turn on all-multi mode if wake on multicast is enabled */ + ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL); + ctrl &= ~MAC_CTRL_DBG; + ctrl &= ~MAC_CTRL_PROMIS_EN; + if (wufc & ATLX_WUFC_MC) + ctrl |= MAC_CTRL_MC_ALL_EN; + else + ctrl &= ~MAC_CTRL_MC_ALL_EN; - /* delay about 1ms */ - msleep(1); + /* turn on broadcast mode if wake on-BC is enabled */ + if (wufc & ATLX_WUFC_BC) + ctrl |= MAC_CTRL_BC_EN; + else + ctrl &= ~MAC_CTRL_BC_EN; - /* Wait at least 10ms for All module to be Idle */ - for (i = 0; i < 10; i++) { - icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); - if (!icr) - break; - /* delay 1 ms */ - msleep(1); - /* FIXME: still the right way to do this? */ - cpu_relax(); + /* enable RX */ + ctrl |= MAC_CTRL_RX_EN; + iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + iowrite32(0, hw->hw_addr + REG_WOL_CTRL); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); } - if (icr) { - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); - return icr; - } + pci_save_state(pdev); + pci_disable_device(pdev); + + pci_set_power_state(pdev, PCI_D3hot); return 0; } -/* function about EEPROM - * - * check_eeprom_exist - * return 0 if eeprom exist - */ -static int atl1_check_eeprom_exist(struct atl1_hw *hw) +static int atl1_resume(struct pci_dev *pdev) { - u32 value; - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (value & SPI_FLASH_CTRL_EN_VPD) { - value &= ~SPI_FLASH_CTRL_EN_VPD; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - } + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter = netdev_priv(netdev); + u32 err; - value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); - return ((value & 0xFF00) == 0x6C00) ? 0 : 1; -} + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); -static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) -{ - int i; - u32 control; + /* FIXME: check and handle */ + err = pci_enable_device(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); - if (offset & 3) - /* address do not align */ - return false; + iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL); + atl1_reset(adapter); - iowrite32(0, hw->hw_addr + REG_VPD_DATA); - control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; - iowrite32(control, hw->hw_addr + REG_VPD_CAP); - ioread32(hw->hw_addr + REG_VPD_CAP); + if (netif_running(netdev)) + atl1_up(adapter); + netif_device_attach(netdev); - for (i = 0; i < 10; i++) { - msleep(2); - control = ioread32(hw->hw_addr + REG_VPD_CAP); - if (control & VPD_CAP_VPD_FLAG) - break; - } - if (control & VPD_CAP_VPD_FLAG) { - *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); - return true; - } - /* timeout */ - return false; + atl1_via_workaround(adapter); + + return 0; +} +#else +#define atl1_suspend NULL +#define atl1_resume NULL +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void atl1_poll_controller(struct net_device *netdev) +{ + disable_irq(netdev->irq); + atl1_intr(netdev->irq, netdev); + enable_irq(netdev->irq); } +#endif /* - * Reads the value from a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to read + * atl1_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. */ -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) +static int __devinit atl1_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - u32 val; - int i; + struct net_device *netdev; + struct atl1_adapter *adapter; + static int cards_found = 0; + int err; - val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); + err = pci_enable_device(pdev); + if (err) + return err; - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; + /* + * The atl1 chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; } - if (!(val & (MDIO_START | MDIO_BUSY))) { - *phy_data = (u16) val; - return 0; + /* + * Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl1_driver_name + */ + err = pci_request_regions(pdev, ATLX_DRIVER_NAME); + if (err) + goto err_request_regions; + + /* + * Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings + */ + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1_adapter)); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; } - return ATLX_ERR_PHY; -} + SET_NETDEV_DEV(netdev, &pdev->dev); -#define CUSTOM_SPI_CS_SETUP 2 -#define CUSTOM_SPI_CLK_HI 2 -#define CUSTOM_SPI_CLK_LO 2 -#define CUSTOM_SPI_CS_HOLD 2 -#define CUSTOM_SPI_CS_HI 3 + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.back = adapter; + adapter->msg_enable = netif_msg_init(debug, atl1_default_msg); + + adapter->hw.hw_addr = pci_iomap(pdev, 0, 0); + if (!adapter->hw.hw_addr) { + err = -EIO; + goto err_pci_iomap; + } + /* get device revision number */ + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + if (netif_msg_probe(adapter)) + dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION); + + /* set default ring resource counts */ + adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; + adapter->tpd_ring.count = ATL1_DEFAULT_TPD; + + adapter->mii.dev = netdev; + adapter->mii.mdio_read = mdio_read; + adapter->mii.mdio_write = mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = 0x1f; + + netdev->open = &atl1_open; + netdev->stop = &atl1_close; + netdev->hard_start_xmit = &atl1_xmit_frame; + netdev->get_stats = &atlx_get_stats; + netdev->set_multicast_list = &atlx_set_multi; + netdev->set_mac_address = &atl1_set_mac; + netdev->change_mtu = &atl1_change_mtu; + netdev->do_ioctl = &atlx_ioctl; + netdev->tx_timeout = &atlx_tx_timeout; + netdev->watchdog_timeo = 5 * HZ; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = atl1_poll_controller; +#endif + netdev->vlan_rx_register = atlx_vlan_rx_register; -static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) -{ - int i; - u32 value; + netdev->ethtool_ops = &atl1_ethtool_ops; + adapter->bd_number = cards_found; - iowrite32(0, hw->hw_addr + REG_SPI_DATA); - iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + /* setup the private structure */ + err = atl1_sw_init(adapter); + if (err) + goto err_common; - value = SPI_FLASH_CTRL_WAIT_READY | - (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << - SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & - SPI_FLASH_CTRL_CLK_HI_MASK) << - SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & - SPI_FLASH_CTRL_CLK_LO_MASK) << - SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & - SPI_FLASH_CTRL_CS_HOLD_MASK) << - SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & - SPI_FLASH_CTRL_CS_HI_MASK) << - SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << - SPI_FLASH_CTRL_INS_SHIFT; + netdev->features = NETIF_F_HW_CSUM; + netdev->features |= NETIF_F_SG; + netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_LLTX; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + /* + * patch for some L1 of old version, + * the final version of L1 may not need these + * patches + */ + /* atl1_pcie_patch(adapter); */ - value |= SPI_FLASH_CTRL_START; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + /* really reset GPHY core */ + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); - for (i = 0; i < 10; i++) { - msleep(1); - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (!(value & SPI_FLASH_CTRL_START)) - break; + /* + * reset the controller to + * put the device in a known good starting state + */ + if (atl1_reset_hw(&adapter->hw)) { + err = -EIO; + goto err_common; } - if (value & SPI_FLASH_CTRL_START) - return false; + /* copy the MAC address out of the EEPROM */ + atl1_read_mac_addr(&adapter->hw); + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); - *buf = ioread32(hw->hw_addr + REG_SPI_DATA); + if (!is_valid_ether_addr(netdev->dev_addr)) { + err = -EIO; + goto err_common; + } - return true; -} + atl1_check_options(adapter); -/* - * get_permanent_address - * return 0 if get valid mac address, - */ -static int atl1_get_permanent_address(struct atl1_hw *hw) -{ - u32 addr[2]; - u32 i, control; - u16 reg; - u8 eth_addr[ETH_ALEN]; - bool key_valid; + /* pre-init the MAC, and setup link */ + err = atl1_init_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_common; + } - if (is_valid_ether_addr(hw->perm_mac_addr)) - return 0; + atl1_pcie_patch(adapter); + /* assume we have no link for now */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); - /* init */ - addr[0] = addr[1] = 0; + init_timer(&adapter->watchdog_timer); + adapter->watchdog_timer.function = &atl1_watchdog; + adapter->watchdog_timer.data = (unsigned long)adapter; - if (!atl1_check_eeprom_exist(hw)) { - reg = 0; - key_valid = false; - /* Read out all EEPROM content */ - i = 0; - while (1) { - if (atl1_read_eeprom(hw, i + 0x100, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; - } else - /* read error */ - break; - i += 4; - } + init_timer(&adapter->phy_config_timer); + adapter->phy_config_timer.function = &atl1_phy_config; + adapter->phy_config_timer.data = (unsigned long)adapter; + adapter->phy_timer_pending = false; - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - return 1; - } + INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); - /* see if SPI FLAGS exist ? */ - addr[0] = addr[1] = 0; - reg = 0; - key_valid = false; - i = 0; - while (1) { - if (atl1_spi_read(hw, i + 0x1f000, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - /* data end */ - break; - } else - /* read error */ - break; - i += 4; - } + INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } + INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); - /* - * On some motherboards, the MAC address is written by the - * BIOS directly to the MAC register during POST, and is - * not stored in eeprom. If all else thus far has failed - * to fetch the permanent MAC address, try reading it directly. - */ - addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); - addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } + err = register_netdev(netdev); + if (err) + goto err_common; - return 1; + cards_found++; + atl1_via_workaround(adapter); + return 0; + +err_common: + pci_iounmap(pdev, adapter->hw.hw_addr); +err_pci_iomap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_dma: +err_request_regions: + pci_disable_device(pdev); + return err; } /* - * Reads the adapter's MAC address from the EEPROM - * hw - Struct containing variables accessed by shared code + * atl1_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. */ -s32 atl1_read_mac_addr(struct atl1_hw *hw) +static void __devexit atl1_remove(struct pci_dev *pdev) { - u16 i; + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1_adapter *adapter; + /* Device not available. Return. */ + if (!netdev) + return; - if (atl1_get_permanent_address(hw)) - random_ether_addr(hw->perm_mac_addr); + adapter = netdev_priv(netdev); - for (i = 0; i < ETH_ALEN; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return 0; + /* + * Some atl1 boards lack persistent storage for their MAC, and get it + * from the BIOS during POST. If we've been messing with the MAC + * address, we need to save the permanent one. + */ + if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) { + memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, + ETH_ALEN); + atl1_set_mac_addr(&adapter->hw); + } + + iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE); + unregister_netdev(netdev); + pci_iounmap(pdev, adapter->hw.hw_addr); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); } +static struct pci_driver atl1_driver = { + .name = ATLX_DRIVER_NAME, + .id_table = atl1_pci_tbl, + .probe = atl1_probe, + .remove = __devexit_p(atl1_remove), + .suspend = atl1_suspend, + .resume = atl1_resume +}; + /* - * Hashes an address to determine its location in the multicast table - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash + * atl1_exit_module - Driver Exit Cleanup Routine * - * atl1_hash_mc_addr - * purpose - * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB + * atl1_exit_module is called just before the driver is removed + * from memory. */ -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) +static void __exit atl1_exit_module(void) { - u32 crc32, value = 0; - int i; - - crc32 = ether_crc_le(6, mc_addr); - for (i = 0; i < 32; i++) - value |= (((crc32 >> i) & 1) << (31 - i)); - - return value; + pci_unregister_driver(&atl1_driver); } /* - * Sets the bit in the multicast table corresponding to the hash value. - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value + * atl1_init_module - Driver Registration Routine + * + * atl1_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. */ -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) +static int __init atl1_init_module(void) { - u32 hash_bit, hash_reg; - u32 mta; - - /* - * The HASH Table is a register array of 2 32-bit registers. - * It is treated like an array of 64 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 31) & 0x1; - hash_bit = (hash_value >> 26) & 0x1F; - mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); - mta |= (1 << hash_bit); - iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + return pci_register_driver(&atl1_driver); } -/* - * Writes a value to a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to write - * data - data to write to the PHY - */ -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) +module_init(atl1_init_module); +module_exit(atl1_exit_module); + +struct atl1_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define ATL1_STAT(m) \ + sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m) + +static struct atl1_stats atl1_gstrings_stats[] = { + {"rx_packets", ATL1_STAT(soft_stats.rx_packets)}, + {"tx_packets", ATL1_STAT(soft_stats.tx_packets)}, + {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)}, + {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)}, + {"rx_errors", ATL1_STAT(soft_stats.rx_errors)}, + {"tx_errors", ATL1_STAT(soft_stats.tx_errors)}, + {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)}, + {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)}, + {"multicast", ATL1_STAT(soft_stats.multicast)}, + {"collisions", ATL1_STAT(soft_stats.collisions)}, + {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)}, + {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)}, + {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)}, + {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)}, + {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)}, + {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)}, + {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)}, + {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)}, + {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)}, + {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)}, + {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)}, + {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)}, + {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)}, + {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)}, + {"tx_underun", ATL1_STAT(soft_stats.tx_underun)}, + {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)}, + {"tx_pause", ATL1_STAT(soft_stats.tx_pause)}, + {"rx_pause", ATL1_STAT(soft_stats.rx_pause)}, + {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)}, + {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)} +}; + +static void atl1_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) { + struct atl1_adapter *adapter = netdev_priv(netdev); int i; - u32 val; - - val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | - (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | - MDIO_SUP_PREAMBLE | - MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); + char *p; - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + p = (char *)adapter+atl1_gstrings_stats[i].stat_offset; + data[i] = (atl1_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } - if (!(val & (MDIO_START | MDIO_BUSY))) - return 0; - - return ATLX_ERR_PHY; } -/* - * Make L001's PHY out of Power Saving State (bug) - * hw - Struct containing variables accessed by shared code - * when power on, L001's PHY always on Power saving State - * (Gigabit Link forbidden) - */ -static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +static int atl1_get_sset_count(struct net_device *netdev, int sset) { - s32 ret; - ret = atl1_write_phy_reg(hw, 29, 0x0029); - if (ret) - return ret; - return atl1_write_phy_reg(hw, 30, 0); + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(atl1_gstrings_stats); + default: + return -EOPNOTSUPP; + } } -/* - *TODO: do something or get rid of this - */ -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +static int atl1_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) { -/* s32 ret_val; - * u16 phy_data; - */ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + ecmd->advertising |= ADVERTISED_Autoneg; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) { + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->advertising |= + (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + } else + ecmd->advertising |= (ADVERTISED_1000baseT_Full); + } + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (netif_carrier_ok(adapter->netdev)) { + u16 link_speed, link_duplex; + atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex); + ecmd->speed = link_speed; + if (link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ return 0; } -/* - * Resets the PHY and make all config validate - * hw - Struct containing variables accessed by shared code - * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) - */ -static s32 atl1_phy_reset(struct atl1_hw *hw) +static int atl1_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) { - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; u16 phy_data; + int ret_val = 0; + u16 old_media_type = hw->media_type; + if (netif_running(adapter->netdev)) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool shutting down adapter\n"); + atl1_down(adapter); + } + + if (ecmd->autoneg == AUTONEG_ENABLE) + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + else { + if (ecmd->speed == SPEED_1000) { + if (ecmd->duplex != DUPLEX_FULL) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "1000M half is invalid\n"); + ret_val = -EINVAL; + goto exit_sset; + } + hw->media_type = MEDIA_TYPE_1000M_FULL; + } else if (ecmd->speed == SPEED_100) { + if (ecmd->duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_100M_FULL; + else + hw->media_type = MEDIA_TYPE_100M_HALF; + } else { + if (ecmd->duplex == DUPLEX_FULL) + hw->media_type = MEDIA_TYPE_10M_FULL; + else + hw->media_type = MEDIA_TYPE_10M_HALF; + } + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ecmd->advertising = + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + case MEDIA_TYPE_1000M_FULL: + ecmd->advertising = + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | ADVERTISED_TP; + break; + default: + ecmd->advertising = 0; + break; + } + if (atl1_phy_setup_autoneg_adv(hw)) { + ret_val = -EINVAL; + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); + goto exit_sset; + } if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || hw->media_type == MEDIA_TYPE_1000M_FULL) phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; @@ -3306,260 +3222,344 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) break; } } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); +exit_sset: + if (ret_val) + hw->media_type = old_media_type; - ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); - if (ret_val) { - u32 val; - int i; - /* pcie serdes link may be down! */ - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "pcie phy link down\n"); + if (netif_running(adapter->netdev)) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool starting adapter\n"); + atl1_up(adapter); + } else if (!ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&adapter->pdev->dev, + "ethtool resetting adapter\n"); + atl1_reset(adapter); + } + return ret_val; +} - for (i = 0; i < 25; i++) { - msleep(1); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } +static void atl1_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); - if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - if (netif_msg_hw(adapter)) - dev_warn(&pdev->dev, - "pcie link down at least 25ms\n"); - return ret_val; - } - } + strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); + strncpy(drvinfo->version, ATLX_DRIVER_VERSION, + sizeof(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->eedump_len = ATL1_EEDUMP_LEN; +} + +static void atl1_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + if (adapter->wol & ATLX_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & ATLX_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & ATLX_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & ATLX_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + return; +} + +static int atl1_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + adapter->wol = 0; + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= ATLX_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= ATLX_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= ATLX_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= ATLX_WUFC_MAG; return 0; } -/* - * Configures PHY autoneg and flow control advertisement settings - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) +static u32 atl1_get_msglevel(struct net_device *netdev) { - s32 ret_val; - s16 mii_autoneg_adv_reg; - s16 mii_1000t_ctrl_reg; + struct atl1_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; +static void atl1_set_msglevel(struct net_device *netdev, u32 value) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = value; +} - /* Read the MII 1000Base-T Control Register (Address 9). */ - mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; +static int atl1_get_regs_len(struct net_device *netdev) +{ + return ATL1_REG_COUNT * sizeof(u32); +} - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; - mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; +static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs, + void *p) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; + unsigned int i; + u32 *regbuf = p; - /* - * Need to parse media_type and set up - * the appropriate PHY registers. - */ - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; - break; + for (i = 0; i < ATL1_REG_COUNT; i++) { + /* + * This switch statement avoids reserved regions + * of register space. + */ + switch (i) { + case 6 ... 9: + case 14: + case 29 ... 31: + case 34 ... 63: + case 75 ... 127: + case 136 ... 1023: + case 1027 ... 1087: + case 1091 ... 1151: + case 1194 ... 1195: + case 1200 ... 1201: + case 1206 ... 1213: + case 1216 ... 1279: + case 1290 ... 1311: + case 1323 ... 1343: + case 1358 ... 1359: + case 1368 ... 1375: + case 1378 ... 1383: + case 1388 ... 1391: + case 1393 ... 1395: + case 1402 ... 1403: + case 1410 ... 1471: + case 1522 ... 1535: + /* reserved region; don't read it */ + regbuf[i] = 0; + break; + default: + /* unreserved region */ + regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32))); + } + } +} - case MEDIA_TYPE_1000M_FULL: - mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; - break; +static void atl1_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *txdr = &adapter->tpd_ring; + struct atl1_rfd_ring *rxdr = &adapter->rfd_ring; - case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; - break; + ring->rx_max_pending = ATL1_MAX_RFD; + ring->tx_max_pending = ATL1_MAX_TPD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rxdr->count; + ring->tx_pending = txdr->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} - case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; - break; +static int atl1_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_tpd_ring *tpdr = &adapter->tpd_ring; + struct atl1_rrd_ring *rrdr = &adapter->rrd_ring; + struct atl1_rfd_ring *rfdr = &adapter->rfd_ring; - case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; - break; + struct atl1_tpd_ring tpd_old, tpd_new; + struct atl1_rfd_ring rfd_old, rfd_new; + struct atl1_rrd_ring rrd_old, rrd_new; + struct atl1_ring_header rhdr_old, rhdr_new; + int err; - default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; - break; - } + tpd_old = adapter->tpd_ring; + rfd_old = adapter->rfd_ring; + rrd_old = adapter->rrd_ring; + rhdr_old = adapter->ring_header; - /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + if (netif_running(adapter->netdev)) + atl1_down(adapter); - hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; - hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD); + rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD : + rfdr->count; + rfdr->count = (rfdr->count + 3) & ~3; + rrdr->count = rfdr->count; - ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; + tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD); + tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD : + tpdr->count; + tpdr->count = (tpdr->count + 3) & ~3; + + if (netif_running(adapter->netdev)) { + /* try to get new resources before deleting old */ + err = atl1_setup_ring_resources(adapter); + if (err) + goto err_setup_ring; + + /* + * save the new, restore the old in order to free it, + * then restore the new back again + */ - ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; + rfd_new = adapter->rfd_ring; + rrd_new = adapter->rrd_ring; + tpd_new = adapter->tpd_ring; + rhdr_new = adapter->ring_header; + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_free_ring_resources(adapter); + adapter->rfd_ring = rfd_new; + adapter->rrd_ring = rrd_new; + adapter->tpd_ring = tpd_new; + adapter->ring_header = rhdr_new; + err = atl1_up(adapter); + if (err) + return err; + } return 0; + +err_setup_ring: + adapter->rfd_ring = rfd_old; + adapter->rrd_ring = rrd_old; + adapter->tpd_ring = tpd_old; + adapter->ring_header = rhdr_old; + atl1_up(adapter); + return err; } -/* - * Configures link settings. - * hw - Struct containing variables accessed by shared code - * Assumes the hardware has previously been reset and the - * transmitter and receiver are not enabled. - */ -static s32 atl1_setup_link(struct atl1_hw *hw) +static void atl1_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) { - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; - /* - * Options: - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * no matter what autoneg is , We will not wait link result. - */ - ret_val = atl1_phy_setup_autoneg_adv(hw); - if (ret_val) { - if (netif_msg_link(adapter)) - dev_dbg(&pdev->dev, - "error setting up autonegotiation\n"); - return ret_val; - } - /* SW.Reset , En-Auto-Neg if needed */ - ret_val = atl1_phy_reset(hw); - if (ret_val) { - if (netif_msg_link(adapter)) - dev_dbg(&pdev->dev, "error resetting phy\n"); - return ret_val; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; } - hw->phy_configured = true; - return ret_val; + epause->rx_pause = 1; + epause->tx_pause = 1; } -static void atl1_init_flash_opcode(struct atl1_hw *hw) +static int atl1_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *epause) { - if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) - /* Atmel */ - hw->flash_vendor = 0; + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; - /* Init OP table */ - iowrite8(flash_table[hw->flash_vendor].cmd_program, - hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); - iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, - hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, - hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_rdid, - hw->hw_addr + REG_SPI_FLASH_OP_RDID); - iowrite8(flash_table[hw->flash_vendor].cmd_wren, - hw->hw_addr + REG_SPI_FLASH_OP_WREN); - iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, - hw->hw_addr + REG_SPI_FLASH_OP_RDSR); - iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, - hw->hw_addr + REG_SPI_FLASH_OP_WRSR); - iowrite8(flash_table[hw->flash_vendor].cmd_read, - hw->hw_addr + REG_SPI_FLASH_OP_READ); + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + epause->autoneg = AUTONEG_ENABLE; + } else { + epause->autoneg = AUTONEG_DISABLE; + } + + epause->rx_pause = 1; + epause->tx_pause = 1; + + return 0; } -/* - * Performs basic configuration of the adapter. - * hw - Struct containing variables accessed by shared code - * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, - * and Calls routines to setup link - * Leaves the transmit and receive units disabled and uninitialized. - */ -s32 atl1_init_hw(struct atl1_hw *hw) +/* FIXME: is this right? -- CHS */ +static u32 atl1_get_rx_csum(struct net_device *netdev) { - u32 ret_val = 0; - - /* Zero out the Multicast HASH table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - /* clear the old settings from the multicast hash table */ - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + return 1; +} - atl1_init_flash_opcode(hw); +static void atl1_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; - if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ - ret_val = atl1_write_phy_reg(hw, 18, 0xC00); - if (ret_val) - return ret_val; - /* make PHY out of power-saving state */ - ret_val = atl1_phy_leave_power_saving(hw); - if (ret_val) - return ret_val; - /* Call a subroutine to configure the link */ - ret_val = atl1_setup_link(hw); + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) { + memcpy(p, atl1_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; } - return ret_val; } -/* - * Detects the current speed and duplex settings of the hardware. - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - */ -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) +static int atl1_nway_reset(struct net_device *netdev) { - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; - u16 phy_data; - - /* ; --- Read PHY Specific Status Register (17) */ - ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); - if (ret_val) - return ret_val; + struct atl1_adapter *adapter = netdev_priv(netdev); + struct atl1_hw *hw = &adapter->hw; - if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) - return ATLX_ERR_PHY_RES; + if (netif_running(netdev)) { + u16 phy_data; + atl1_down(adapter); - switch (phy_data & MII_ATLX_PSSR_SPEED) { - case MII_ATLX_PSSR_1000MBS: - *speed = SPEED_1000; - break; - case MII_ATLX_PSSR_100MBS: - *speed = SPEED_100; - break; - case MII_ATLX_PSSR_10MBS: - *speed = SPEED_10; - break; - default: - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "error getting speed\n"); - return ATLX_ERR_PHY_SPEED; - break; + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) { + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + } else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = MII_CR_FULL_DUPLEX | + MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + } + } + atl1_write_phy_reg(hw, MII_BMCR, phy_data); + atl1_up(adapter); } - if (phy_data & MII_ATLX_PSSR_DPLX) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - return 0; } -void atl1_set_mac_addr(struct atl1_hw *hw) -{ - u32 value; - /* - * 00-0B-6A-F6-00-DC - * 0: 6AF600DC 1: 000B - * low dword - */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - /* high dword */ - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); -} +const struct ethtool_ops atl1_ethtool_ops = { + .get_settings = atl1_get_settings, + .set_settings = atl1_set_settings, + .get_drvinfo = atl1_get_drvinfo, + .get_wol = atl1_get_wol, + .set_wol = atl1_set_wol, + .get_msglevel = atl1_get_msglevel, + .set_msglevel = atl1_set_msglevel, + .get_regs_len = atl1_get_regs_len, + .get_regs = atl1_get_regs, + .get_ringparam = atl1_get_ringparam, + .set_ringparam = atl1_set_ringparam, + .get_pauseparam = atl1_get_pauseparam, + .set_pauseparam = atl1_set_pauseparam, + .get_rx_csum = atl1_get_rx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_link = ethtool_op_get_link, + .set_sg = ethtool_op_set_sg, + .get_strings = atl1_get_strings, + .nway_reset = atl1_nway_reset, + .get_ethtool_stats = atl1_get_ethtool_stats, + .get_sset_count = atl1_get_sset_count, + .set_tso = ethtool_op_set_tso, +}; diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 6220298..51893d6 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -56,20 +56,10 @@ struct atl1_adapter; struct atl1_hw; /* function prototypes needed by multiple files */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_read_mac_addr(struct atl1_hw *hw); -s32 atl1_init_hw(struct atl1_hw *hw); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); void atl1_set_mac_addr(struct atl1_hw *hw); -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); -s32 atl1_reset_hw(struct atl1_hw *hw); -void atl1_check_options(struct atl1_adapter *adapter); static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static u32 atl1_check_link(struct atl1_adapter *adapter); -- cgit v1.1 From f423f73506ba8e837b5fdcd8c8be50078deb123d Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 8 Feb 2008 00:03:48 +0100 Subject: drivers/s390/net: Kconfig brush up adapt drivers/s390/net/Kconfig to current IBM wording and further cosmetics Signed-off-by: Peter Tiedemann Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/Kconfig | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index eada69d..9ef029e 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -5,22 +5,23 @@ config LCS tristate "Lan Channel Station Interface" depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI) help - Select this option if you want to use LCS networking on IBM S/390 - or zSeries. This device driver supports Token Ring (IEEE 802.5), - FDDI (IEEE 802.7) and Ethernet. - This option is also available as a module which will be - called lcs.ko. If you do not know what it is, it's safe to say "Y". + Select this option if you want to use LCS networking on IBM System z. + This device driver supports Token Ring (IEEE 802.5), + FDDI (IEEE 802.7) and Ethernet. + To compile as a module, choose M. The module name is lcs.ko. + If you do not know what it is, it's safe to choose Y. config CTC tristate "CTC device support" depends on CCW && NETDEVICES help - Select this option if you want to use channel-to-channel networking - on IBM S/390 or zSeries. This device driver supports real CTC - coupling using ESCON. It also supports virtual CTCs when running - under VM. It will use the channel device configuration if this is - available. This option is also available as a module which will be - called ctc.ko. If you do not know what it is, it's safe to say "Y". + Select this option if you want to use channel-to-channel + point-to-point networking on IBM System z. + This device driver supports real CTC coupling using ESCON. + It also supports virtual CTCs when running under VM. + To compile as a module, choose M. The module name is ctc.ko. + To compile into the kernel, choose Y. + If you do not need any channel-to-channel connection, choose N. config NETIUCV tristate "IUCV network device support (VM only)" @@ -29,9 +30,9 @@ config NETIUCV Select this option if you want to use inter-user communication vehicle networking under VM or VIF. It enables a fast communication link between VM guests. Using ifconfig a point-to-point connection - can be established to the Linux for zSeries and S7390 system - running on the other VM guest. This option is also available - as a module which will be called netiucv.ko. If unsure, say "Y". + can be established to the Linux on IBM System z + running on the other VM guest. To compile as a module, choose M. + The module name is netiucv.ko. If unsure, choose Y. config SMSGIUCV tristate "IUCV special message support (VM only)" @@ -47,22 +48,22 @@ config CLAW This driver supports channel attached CLAW devices. CLAW is Common Link Access for Workstation. Common devices that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices. - To compile as a module choose M here: The module will be called - claw.ko to compile into the kernel choose Y + To compile as a module, choose M. The module name is claw.ko. + To compile into the kernel, choose Y. config QETH tristate "Gigabit Ethernet device support" depends on CCW && NETDEVICES && IP_MULTICAST && QDIO help - This driver supports the IBM S/390 and zSeries OSA Express adapters + This driver supports the IBM System z OSA Express adapters in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN interfaces in QDIO and HIPER mode. - For details please refer to the documentation provided by IBM at - + For details please refer to the documentation provided by IBM at + - To compile this driver as a module, choose M here: the - module will be called qeth.ko. + To compile this driver as a module, choose M. + The module name is qeth.ko. comment "Gigabit Ethernet default settings" -- cgit v1.1 From 293d984f0e3604c04dcdbf00117ddc1e5d4b1909 Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Fri, 8 Feb 2008 00:03:49 +0100 Subject: ctcm: infrastructure for replaced ctc driver ctcm driver supports the channel-to-channel connections of the old ctc driver plus an additional MPC protocol to provide SNA connectivity. This new ctcm driver replaces the existing ctc driver. Signed-off-by: Peter Tiedemann Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/Kconfig | 12 +- drivers/s390/net/Makefile | 5 +- drivers/s390/net/ctcm_dbug.c | 67 ++ drivers/s390/net/ctcm_dbug.h | 158 +++ drivers/s390/net/ctcm_fsms.c | 2347 ++++++++++++++++++++++++++++++++++++++ drivers/s390/net/ctcm_fsms.h | 359 ++++++ drivers/s390/net/ctcm_main.c | 1772 +++++++++++++++++++++++++++++ drivers/s390/net/ctcm_main.h | 287 +++++ drivers/s390/net/ctcm_mpc.c | 2472 +++++++++++++++++++++++++++++++++++++++++ drivers/s390/net/ctcm_mpc.h | 239 ++++ drivers/s390/net/ctcm_sysfs.c | 210 ++++ 11 files changed, 7920 insertions(+), 8 deletions(-) create mode 100644 drivers/s390/net/ctcm_dbug.c create mode 100644 drivers/s390/net/ctcm_dbug.h create mode 100644 drivers/s390/net/ctcm_fsms.c create mode 100644 drivers/s390/net/ctcm_fsms.h create mode 100644 drivers/s390/net/ctcm_main.c create mode 100644 drivers/s390/net/ctcm_main.h create mode 100644 drivers/s390/net/ctcm_mpc.c create mode 100644 drivers/s390/net/ctcm_mpc.h create mode 100644 drivers/s390/net/ctcm_sysfs.c (limited to 'drivers') diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index 9ef029e..773f5a6 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -11,15 +11,17 @@ config LCS To compile as a module, choose M. The module name is lcs.ko. If you do not know what it is, it's safe to choose Y. -config CTC - tristate "CTC device support" +config CTCM + tristate "CTC and MPC SNA device support" depends on CCW && NETDEVICES help Select this option if you want to use channel-to-channel point-to-point networking on IBM System z. This device driver supports real CTC coupling using ESCON. It also supports virtual CTCs when running under VM. - To compile as a module, choose M. The module name is ctc.ko. + This driver also supports channel-to-channel MPC SNA devices. + MPC is an SNA protocol device used by Communication Server for Linux. + To compile as a module, choose M. The module name is ctcm.ko. To compile into the kernel, choose Y. If you do not need any channel-to-channel connection, choose N. @@ -84,7 +86,7 @@ config QETH_VLAN 802.1q VLAN support in the qeth device driver. config CCWGROUP - tristate - default (LCS || CTC || QETH) + tristate + default (LCS || CTCM || QETH) endmenu diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile index bbe3ab2..f6d189a 100644 --- a/drivers/s390/net/Makefile +++ b/drivers/s390/net/Makefile @@ -2,11 +2,10 @@ # S/390 network devices # -ctc-objs := ctcmain.o ctcdbug.o - +ctcm-y += ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o +obj-$(CONFIG_CTCM) += ctcm.o fsm.o cu3088.o obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o obj-$(CONFIG_SMSGIUCV) += smsgiucv.o -obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o obj-$(CONFIG_LCS) += lcs.o cu3088.o obj-$(CONFIG_CLAW) += claw.o cu3088.o qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o diff --git a/drivers/s390/net/ctcm_dbug.c b/drivers/s390/net/ctcm_dbug.c new file mode 100644 index 0000000..8eb25d0 --- /dev/null +++ b/drivers/s390/net/ctcm_dbug.c @@ -0,0 +1,67 @@ +/* + * drivers/s390/net/ctcm_dbug.c + * + * Copyright IBM Corp. 2001, 2007 + * Authors: Peter Tiedemann (ptiedem@de.ibm.com) + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ctcm_dbug.h" + +/* + * Debug Facility Stuff + */ + +DEFINE_PER_CPU(char[256], ctcm_dbf_txt_buf); + +struct ctcm_dbf_info ctcm_dbf[CTCM_DBF_INFOS] = { + [CTCM_DBF_SETUP] = {"ctc_setup", 8, 1, 64, 5, NULL}, + [CTCM_DBF_ERROR] = {"ctc_error", 8, 1, 64, 3, NULL}, + [CTCM_DBF_TRACE] = {"ctc_trace", 8, 1, 64, 3, NULL}, + [CTCM_DBF_MPC_SETUP] = {"mpc_setup", 8, 1, 64, 5, NULL}, + [CTCM_DBF_MPC_ERROR] = {"mpc_error", 8, 1, 64, 3, NULL}, + [CTCM_DBF_MPC_TRACE] = {"mpc_trace", 8, 1, 64, 3, NULL}, +}; + +void ctcm_unregister_dbf_views(void) +{ + int x; + for (x = 0; x < CTCM_DBF_INFOS; x++) { + debug_unregister(ctcm_dbf[x].id); + ctcm_dbf[x].id = NULL; + } +} + +int ctcm_register_dbf_views(void) +{ + int x; + for (x = 0; x < CTCM_DBF_INFOS; x++) { + /* register the areas */ + ctcm_dbf[x].id = debug_register(ctcm_dbf[x].name, + ctcm_dbf[x].pages, + ctcm_dbf[x].areas, + ctcm_dbf[x].len); + if (ctcm_dbf[x].id == NULL) { + ctcm_unregister_dbf_views(); + return -ENOMEM; + } + + /* register a view */ + debug_register_view(ctcm_dbf[x].id, &debug_hex_ascii_view); + /* set a passing level */ + debug_set_level(ctcm_dbf[x].id, ctcm_dbf[x].level); + } + + return 0; +} + diff --git a/drivers/s390/net/ctcm_dbug.h b/drivers/s390/net/ctcm_dbug.h new file mode 100644 index 0000000..fdff34f --- /dev/null +++ b/drivers/s390/net/ctcm_dbug.h @@ -0,0 +1,158 @@ +/* + * drivers/s390/net/ctcm_dbug.h + * + * Copyright IBM Corp. 2001, 2007 + * Authors: Peter Tiedemann (ptiedem@de.ibm.com) + * + */ + +#ifndef _CTCM_DBUG_H_ +#define _CTCM_DBUG_H_ + +/* + * Debug Facility stuff + */ + +#include + +#ifdef DEBUG + #define do_debug 1 +#else + #define do_debug 0 +#endif +#ifdef DEBUGDATA + #define do_debug_data 1 +#else + #define do_debug_data 0 +#endif +#ifdef DEBUGCCW + #define do_debug_ccw 1 +#else + #define do_debug_ccw 0 +#endif + +/* define dbf debug levels similar to kernel msg levels */ +#define CTC_DBF_ALWAYS 0 /* always print this */ +#define CTC_DBF_EMERG 0 /* system is unusable */ +#define CTC_DBF_ALERT 1 /* action must be taken immediately */ +#define CTC_DBF_CRIT 2 /* critical conditions */ +#define CTC_DBF_ERROR 3 /* error conditions */ +#define CTC_DBF_WARN 4 /* warning conditions */ +#define CTC_DBF_NOTICE 5 /* normal but significant condition */ +#define CTC_DBF_INFO 5 /* informational */ +#define CTC_DBF_DEBUG 6 /* debug-level messages */ + +DECLARE_PER_CPU(char[256], ctcm_dbf_txt_buf); + +enum ctcm_dbf_names { + CTCM_DBF_SETUP, + CTCM_DBF_ERROR, + CTCM_DBF_TRACE, + CTCM_DBF_MPC_SETUP, + CTCM_DBF_MPC_ERROR, + CTCM_DBF_MPC_TRACE, + CTCM_DBF_INFOS /* must be last element */ +}; + +struct ctcm_dbf_info { + char name[DEBUG_MAX_NAME_LEN]; + int pages; + int areas; + int len; + int level; + debug_info_t *id; +}; + +extern struct ctcm_dbf_info ctcm_dbf[CTCM_DBF_INFOS]; + +int ctcm_register_dbf_views(void); +void ctcm_unregister_dbf_views(void); + +static inline const char *strtail(const char *s, int n) +{ + int l = strlen(s); + return (l > n) ? s + (l - n) : s; +} + +/* sort out levels early to avoid unnecessary sprintfs */ +static inline int ctcm_dbf_passes(debug_info_t *dbf_grp, int level) +{ + return (dbf_grp->level >= level); +} + +#define CTCM_FUNTAIL strtail((char *)__func__, 16) + +#define CTCM_DBF_TEXT(name, level, text) \ + do { \ + debug_text_event(ctcm_dbf[CTCM_DBF_##name].id, level, text); \ + } while (0) + +#define CTCM_DBF_HEX(name, level, addr, len) \ + do { \ + debug_event(ctcm_dbf[CTCM_DBF_##name].id, \ + level, (void *)(addr), len); \ + } while (0) + +#define CTCM_DBF_TEXT_(name, level, text...) \ + do { \ + if (ctcm_dbf_passes(ctcm_dbf[CTCM_DBF_##name].id, level)) { \ + char *ctcm_dbf_txt_buf = \ + get_cpu_var(ctcm_dbf_txt_buf); \ + sprintf(ctcm_dbf_txt_buf, text); \ + debug_text_event(ctcm_dbf[CTCM_DBF_##name].id, \ + level, ctcm_dbf_txt_buf); \ + put_cpu_var(ctcm_dbf_txt_buf); \ + } \ + } while (0) + +/* + * cat : one of {setup, mpc_setup, trace, mpc_trace, error, mpc_error}. + * dev : netdevice with valid name field. + * text: any text string. + */ +#define CTCM_DBF_DEV_NAME(cat, dev, text) \ + do { \ + CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%s) : %s", \ + CTCM_FUNTAIL, dev->name, text); \ + } while (0) + +#define MPC_DBF_DEV_NAME(cat, dev, text) \ + do { \ + CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%s) : %s", \ + CTCM_FUNTAIL, dev->name, text); \ + } while (0) + +#define CTCMY_DBF_DEV_NAME(cat, dev, text) \ + do { \ + if (IS_MPCDEV(dev)) \ + MPC_DBF_DEV_NAME(cat, dev, text); \ + else \ + CTCM_DBF_DEV_NAME(cat, dev, text); \ + } while (0) + +/* + * cat : one of {setup, mpc_setup, trace, mpc_trace, error, mpc_error}. + * dev : netdevice. + * text: any text string. + */ +#define CTCM_DBF_DEV(cat, dev, text) \ + do { \ + CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%p) : %s", \ + CTCM_FUNTAIL, dev, text); \ + } while (0) + +#define MPC_DBF_DEV(cat, dev, text) \ + do { \ + CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%p) : %s", \ + CTCM_FUNTAIL, dev, text); \ + } while (0) + +#define CTCMY_DBF_DEV(cat, dev, text) \ + do { \ + if (IS_MPCDEV(dev)) \ + MPC_DBF_DEV(cat, dev, text); \ + else \ + CTCM_DBF_DEV(cat, dev, text); \ + } while (0) + +#endif diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c new file mode 100644 index 0000000..2a106f3 --- /dev/null +++ b/drivers/s390/net/ctcm_fsms.c @@ -0,0 +1,2347 @@ +/* + * drivers/s390/net/ctcm_fsms.c + * + * Copyright IBM Corp. 2001, 2007 + * Authors: Fritz Elfert (felfert@millenux.com) + * Peter Tiedemann (ptiedem@de.ibm.com) + * MPC additions : + * Belinda Thompson (belindat@us.ibm.com) + * Andy Richter (richtera@us.ibm.com) + */ + +#undef DEBUG +#undef DEBUGDATA +#undef DEBUGCCW + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "fsm.h" +#include "cu3088.h" + +#include "ctcm_dbug.h" +#include "ctcm_main.h" +#include "ctcm_fsms.h" + +const char *dev_state_names[] = { + [DEV_STATE_STOPPED] = "Stopped", + [DEV_STATE_STARTWAIT_RXTX] = "StartWait RXTX", + [DEV_STATE_STARTWAIT_RX] = "StartWait RX", + [DEV_STATE_STARTWAIT_TX] = "StartWait TX", + [DEV_STATE_STOPWAIT_RXTX] = "StopWait RXTX", + [DEV_STATE_STOPWAIT_RX] = "StopWait RX", + [DEV_STATE_STOPWAIT_TX] = "StopWait TX", + [DEV_STATE_RUNNING] = "Running", +}; + +const char *dev_event_names[] = { + [DEV_EVENT_START] = "Start", + [DEV_EVENT_STOP] = "Stop", + [DEV_EVENT_RXUP] = "RX up", + [DEV_EVENT_TXUP] = "TX up", + [DEV_EVENT_RXDOWN] = "RX down", + [DEV_EVENT_TXDOWN] = "TX down", + [DEV_EVENT_RESTART] = "Restart", +}; + +const char *ctc_ch_event_names[] = { + [CTC_EVENT_IO_SUCCESS] = "ccw_device success", + [CTC_EVENT_IO_EBUSY] = "ccw_device busy", + [CTC_EVENT_IO_ENODEV] = "ccw_device enodev", + [CTC_EVENT_IO_UNKNOWN] = "ccw_device unknown", + [CTC_EVENT_ATTNBUSY] = "Status ATTN & BUSY", + [CTC_EVENT_ATTN] = "Status ATTN", + [CTC_EVENT_BUSY] = "Status BUSY", + [CTC_EVENT_UC_RCRESET] = "Unit check remote reset", + [CTC_EVENT_UC_RSRESET] = "Unit check remote system reset", + [CTC_EVENT_UC_TXTIMEOUT] = "Unit check TX timeout", + [CTC_EVENT_UC_TXPARITY] = "Unit check TX parity", + [CTC_EVENT_UC_HWFAIL] = "Unit check Hardware failure", + [CTC_EVENT_UC_RXPARITY] = "Unit check RX parity", + [CTC_EVENT_UC_ZERO] = "Unit check ZERO", + [CTC_EVENT_UC_UNKNOWN] = "Unit check Unknown", + [CTC_EVENT_SC_UNKNOWN] = "SubChannel check Unknown", + [CTC_EVENT_MC_FAIL] = "Machine check failure", + [CTC_EVENT_MC_GOOD] = "Machine check operational", + [CTC_EVENT_IRQ] = "IRQ normal", + [CTC_EVENT_FINSTAT] = "IRQ final", + [CTC_EVENT_TIMER] = "Timer", + [CTC_EVENT_START] = "Start", + [CTC_EVENT_STOP] = "Stop", + /* + * additional MPC events + */ + [CTC_EVENT_SEND_XID] = "XID Exchange", + [CTC_EVENT_RSWEEP_TIMER] = "MPC Group Sweep Timer", +}; + +const char *ctc_ch_state_names[] = { + [CTC_STATE_IDLE] = "Idle", + [CTC_STATE_STOPPED] = "Stopped", + [CTC_STATE_STARTWAIT] = "StartWait", + [CTC_STATE_STARTRETRY] = "StartRetry", + [CTC_STATE_SETUPWAIT] = "SetupWait", + [CTC_STATE_RXINIT] = "RX init", + [CTC_STATE_TXINIT] = "TX init", + [CTC_STATE_RX] = "RX", + [CTC_STATE_TX] = "TX", + [CTC_STATE_RXIDLE] = "RX idle", + [CTC_STATE_TXIDLE] = "TX idle", + [CTC_STATE_RXERR] = "RX error", + [CTC_STATE_TXERR] = "TX error", + [CTC_STATE_TERM] = "Terminating", + [CTC_STATE_DTERM] = "Restarting", + [CTC_STATE_NOTOP] = "Not operational", + /* + * additional MPC states + */ + [CH_XID0_PENDING] = "Pending XID0 Start", + [CH_XID0_INPROGRESS] = "In XID0 Negotiations ", + [CH_XID7_PENDING] = "Pending XID7 P1 Start", + [CH_XID7_PENDING1] = "Active XID7 P1 Exchange ", + [CH_XID7_PENDING2] = "Pending XID7 P2 Start ", + [CH_XID7_PENDING3] = "Active XID7 P2 Exchange ", + [CH_XID7_PENDING4] = "XID7 Complete - Pending READY ", +}; + +static void ctcm_action_nop(fsm_instance *fi, int event, void *arg); + +/* + * ----- static ctcm actions for channel statemachine ----- + * +*/ +static void chx_txdone(fsm_instance *fi, int event, void *arg); +static void chx_rx(fsm_instance *fi, int event, void *arg); +static void chx_rxidle(fsm_instance *fi, int event, void *arg); +static void chx_firstio(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_setmode(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_start(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_haltio(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_stopped(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_stop(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_fail(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_restart(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg); + +/* + * ----- static ctcmpc actions for ctcmpc channel statemachine ----- + * +*/ +static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg); +static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg); +static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg); +/* shared : +static void ctcm_chx_setmode(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_start(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_haltio(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_stopped(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_stop(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_fail(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_restart(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg); +static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg); +*/ +static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg); +static void ctcmpc_chx_attnbusy(fsm_instance *, int, void *); +static void ctcmpc_chx_resend(fsm_instance *, int, void *); +static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg); + +/** + * Check return code of a preceeding ccw_device call, halt_IO etc... + * + * ch : The channel, the error belongs to. + * Returns the error code (!= 0) to inspect. + */ +void ctcm_ccw_check_rc(struct channel *ch, int rc, char *msg) +{ + CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR, + "ccw error %s (%s): %04x\n", ch->id, msg, rc); + switch (rc) { + case -EBUSY: + ctcm_pr_warn("%s (%s): Busy !\n", ch->id, msg); + fsm_event(ch->fsm, CTC_EVENT_IO_EBUSY, ch); + break; + case -ENODEV: + ctcm_pr_emerg("%s (%s): Invalid device called for IO\n", + ch->id, msg); + fsm_event(ch->fsm, CTC_EVENT_IO_ENODEV, ch); + break; + default: + ctcm_pr_emerg("%s (%s): Unknown error in do_IO %04x\n", + ch->id, msg, rc); + fsm_event(ch->fsm, CTC_EVENT_IO_UNKNOWN, ch); + } +} + +void ctcm_purge_skb_queue(struct sk_buff_head *q) +{ + struct sk_buff *skb; + + CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__); + + while ((skb = skb_dequeue(q))) { + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + } +} + +/** + * NOP action for statemachines + */ +static void ctcm_action_nop(fsm_instance *fi, int event, void *arg) +{ +} + +/* + * Actions for channel - statemachines. + */ + +/** + * Normal data has been send. Free the corresponding + * skb (it's in io_queue), reset dev->tbusy and + * revert to idle state. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void chx_txdone(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct sk_buff *skb; + int first = 1; + int i; + unsigned long duration; + struct timespec done_stamp = current_kernel_time(); /* xtime */ + + duration = + (done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000 + + (done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000; + if (duration > ch->prof.tx_time) + ch->prof.tx_time = duration; + + if (ch->irb->scsw.count != 0) + ctcm_pr_debug("%s: TX not complete, remaining %d bytes\n", + dev->name, ch->irb->scsw.count); + fsm_deltimer(&ch->timer); + while ((skb = skb_dequeue(&ch->io_queue))) { + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; + if (first) { + priv->stats.tx_bytes += 2; + first = 0; + } + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + } + spin_lock(&ch->collect_lock); + clear_normalized_cda(&ch->ccw[4]); + if (ch->collect_len > 0) { + int rc; + + if (ctcm_checkalloc_buffer(ch)) { + spin_unlock(&ch->collect_lock); + return; + } + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + if (ch->prof.maxmulti < (ch->collect_len + 2)) + ch->prof.maxmulti = ch->collect_len + 2; + if (ch->prof.maxcqueue < skb_queue_len(&ch->collect_queue)) + ch->prof.maxcqueue = skb_queue_len(&ch->collect_queue); + *((__u16 *)skb_put(ch->trans_skb, 2)) = ch->collect_len + 2; + i = 0; + while ((skb = skb_dequeue(&ch->collect_queue))) { + skb_copy_from_linear_data(skb, + skb_put(ch->trans_skb, skb->len), skb->len); + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + i++; + } + ch->collect_len = 0; + spin_unlock(&ch->collect_lock); + ch->ccw[1].count = ch->trans_skb->len; + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + ch->prof.send_stamp = current_kernel_time(); /* xtime */ + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + ch->prof.doios_multi++; + if (rc != 0) { + priv->stats.tx_dropped += i; + priv->stats.tx_errors += i; + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "chained TX"); + } + } else { + spin_unlock(&ch->collect_lock); + fsm_newstate(fi, CTC_STATE_TXIDLE); + } + ctcm_clear_busy_do(dev); +} + +/** + * Initial data is sent. + * Notify device statemachine that we are up and + * running. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__); + fsm_deltimer(&ch->timer); + fsm_newstate(fi, CTC_STATE_TXIDLE); + fsm_event(priv->fsm, DEV_EVENT_TXUP, ch->netdev); +} + +/** + * Got normal data, check for sanity, queue it up, allocate new buffer + * trigger bottom half, and initiate next read. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void chx_rx(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + int len = ch->max_bufsize - ch->irb->scsw.count; + struct sk_buff *skb = ch->trans_skb; + __u16 block_len = *((__u16 *)skb->data); + int check_len; + int rc; + + fsm_deltimer(&ch->timer); + if (len < 8) { + ctcm_pr_debug("%s: got packet with length %d < 8\n", + dev->name, len); + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + goto again; + } + if (len > ch->max_bufsize) { + ctcm_pr_debug("%s: got packet with length %d > %d\n", + dev->name, len, ch->max_bufsize); + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + goto again; + } + + /* + * VM TCP seems to have a bug sending 2 trailing bytes of garbage. + */ + switch (ch->protocol) { + case CTCM_PROTO_S390: + case CTCM_PROTO_OS390: + check_len = block_len + 2; + break; + default: + check_len = block_len; + break; + } + if ((len < block_len) || (len > check_len)) { + ctcm_pr_debug("%s: got block length %d != rx length %d\n", + dev->name, block_len, len); + if (do_debug) + ctcmpc_dump_skb(skb, 0); + + *((__u16 *)skb->data) = len; + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + goto again; + } + block_len -= 2; + if (block_len > 0) { + *((__u16 *)skb->data) = block_len; + ctcm_unpack_skb(ch, skb); + } + again: + skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(skb); + skb->len = 0; + if (ctcm_checkalloc_buffer(ch)) + return; + ch->ccw[1].count = ch->max_bufsize; + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + if (rc != 0) + ctcm_ccw_check_rc(ch, rc, "normal RX"); +} + +/** + * Initialize connection by sending a __u16 of value 0. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void chx_firstio(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + int rc; + + CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__); + + if (fsm_getstate(fi) == CTC_STATE_TXIDLE) + ctcm_pr_debug("%s: remote side issued READ?, init.\n", ch->id); + fsm_deltimer(&ch->timer); + if (ctcm_checkalloc_buffer(ch)) + return; + if ((fsm_getstate(fi) == CTC_STATE_SETUPWAIT) && + (ch->protocol == CTCM_PROTO_OS390)) { + /* OS/390 resp. z/OS */ + if (CHANNEL_DIRECTION(ch->flags) == READ) { + *((__u16 *)ch->trans_skb->data) = CTCM_INITIAL_BLOCKLEN; + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, + CTC_EVENT_TIMER, ch); + chx_rxidle(fi, event, arg); + } else { + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + fsm_newstate(fi, CTC_STATE_TXIDLE); + fsm_event(priv->fsm, DEV_EVENT_TXUP, dev); + } + return; + } + + /* + * Don't setup a timer for receiving the initial RX frame + * if in compatibility mode, since VM TCP delays the initial + * frame until it has some data to send. + */ + if ((CHANNEL_DIRECTION(ch->flags) == WRITE) || + (ch->protocol != CTCM_PROTO_S390)) + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + + *((__u16 *)ch->trans_skb->data) = CTCM_INITIAL_BLOCKLEN; + ch->ccw[1].count = 2; /* Transfer only length */ + + fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == READ) + ? CTC_STATE_RXINIT : CTC_STATE_TXINIT); + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + if (rc != 0) { + fsm_deltimer(&ch->timer); + fsm_newstate(fi, CTC_STATE_SETUPWAIT); + ctcm_ccw_check_rc(ch, rc, "init IO"); + } + /* + * If in compatibility mode since we don't setup a timer, we + * also signal RX channel up immediately. This enables us + * to send packets early which in turn usually triggers some + * reply from VM TCP which brings up the RX channel to it's + * final state. + */ + if ((CHANNEL_DIRECTION(ch->flags) == READ) && + (ch->protocol == CTCM_PROTO_S390)) { + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + fsm_event(priv->fsm, DEV_EVENT_RXUP, dev); + } +} + +/** + * Got initial data, check it. If OK, + * notify device statemachine that we are up and + * running. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void chx_rxidle(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + __u16 buflen; + int rc; + + CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__); + fsm_deltimer(&ch->timer); + buflen = *((__u16 *)ch->trans_skb->data); + if (do_debug) + ctcm_pr_debug("%s: Initial RX count %d\n", dev->name, buflen); + + if (buflen >= CTCM_INITIAL_BLOCKLEN) { + if (ctcm_checkalloc_buffer(ch)) + return; + ch->ccw[1].count = ch->max_bufsize; + fsm_newstate(fi, CTC_STATE_RXIDLE); + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + if (rc != 0) { + fsm_newstate(fi, CTC_STATE_RXINIT); + ctcm_ccw_check_rc(ch, rc, "initial RX"); + } else + fsm_event(priv->fsm, DEV_EVENT_RXUP, dev); + } else { + if (do_debug) + ctcm_pr_debug("%s: Initial RX count %d not %d\n", + dev->name, buflen, CTCM_INITIAL_BLOCKLEN); + chx_firstio(fi, event, arg); + } +} + +/** + * Set channel into extended mode. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_setmode(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + int rc; + unsigned long saveflags = 0; + int timeout = CTCM_TIME_5_SEC; + + fsm_deltimer(&ch->timer); + if (IS_MPC(ch)) { + timeout = 1500; + if (do_debug) + ctcm_pr_debug("ctcm enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + } + fsm_addtimer(&ch->timer, timeout, CTC_EVENT_TIMER, ch); + fsm_newstate(fi, CTC_STATE_SETUPWAIT); + if (do_debug_ccw && IS_MPC(ch)) + ctcmpc_dumpit((char *)&ch->ccw[6], sizeof(struct ccw1) * 2); + + if (event == CTC_EVENT_TIMER) /* only for timer not yet locked */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + /* Such conditional locking is undeterministic in + * static view. => ignore sparse warnings here. */ + + rc = ccw_device_start(ch->cdev, &ch->ccw[6], + (unsigned long)ch, 0xff, 0); + if (event == CTC_EVENT_TIMER) /* see above comments */ + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + if (rc != 0) { + fsm_deltimer(&ch->timer); + fsm_newstate(fi, CTC_STATE_STARTWAIT); + ctcm_ccw_check_rc(ch, rc, "set Mode"); + } else + ch->retry = 0; +} + +/** + * Setup channel. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_start(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + int rc; + struct net_device *dev; + unsigned long saveflags; + + CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__); + if (ch == NULL) { + ctcm_pr_warn("chx_start ch=NULL\n"); + return; + } + if (ch->netdev == NULL) { + ctcm_pr_warn("chx_start dev=NULL, id=%s\n", ch->id); + return; + } + dev = ch->netdev; + + if (do_debug) + ctcm_pr_debug("%s: %s channel start\n", dev->name, + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); + + if (ch->trans_skb != NULL) { + clear_normalized_cda(&ch->ccw[1]); + dev_kfree_skb(ch->trans_skb); + ch->trans_skb = NULL; + } + if (CHANNEL_DIRECTION(ch->flags) == READ) { + ch->ccw[1].cmd_code = CCW_CMD_READ; + ch->ccw[1].flags = CCW_FLAG_SLI; + ch->ccw[1].count = 0; + } else { + ch->ccw[1].cmd_code = CCW_CMD_WRITE; + ch->ccw[1].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[1].count = 0; + } + if (ctcm_checkalloc_buffer(ch)) { + ctcm_pr_notice("%s: %s trans_skb allocation delayed " + "until first transfer\n", dev->name, + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); + } + + ch->ccw[0].cmd_code = CCW_CMD_PREPARE; + ch->ccw[0].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[0].count = 0; + ch->ccw[0].cda = 0; + ch->ccw[2].cmd_code = CCW_CMD_NOOP; /* jointed CE + DE */ + ch->ccw[2].flags = CCW_FLAG_SLI; + ch->ccw[2].count = 0; + ch->ccw[2].cda = 0; + memcpy(&ch->ccw[3], &ch->ccw[0], sizeof(struct ccw1) * 3); + ch->ccw[4].cda = 0; + ch->ccw[4].flags &= ~CCW_FLAG_IDA; + + fsm_newstate(fi, CTC_STATE_STARTWAIT); + fsm_addtimer(&ch->timer, 1000, CTC_EVENT_TIMER, ch); + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + rc = ccw_device_halt(ch->cdev, (unsigned long)ch); + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + if (rc != 0) { + if (rc != -EBUSY) + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "initial HaltIO"); + } +} + +/** + * Shutdown a channel. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_haltio(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + unsigned long saveflags = 0; + int rc; + int oldstate; + + CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__); + fsm_deltimer(&ch->timer); + if (IS_MPC(ch)) + fsm_deltimer(&ch->sweep_timer); + + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + + if (event == CTC_EVENT_STOP) /* only for STOP not yet locked */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + /* Such conditional locking is undeterministic in + * static view. => ignore sparse warnings here. */ + oldstate = fsm_getstate(fi); + fsm_newstate(fi, CTC_STATE_TERM); + rc = ccw_device_halt(ch->cdev, (unsigned long)ch); + + if (event == CTC_EVENT_STOP) + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + /* see remark above about conditional locking */ + + if (rc != 0 && rc != -EBUSY) { + fsm_deltimer(&ch->timer); + if (event != CTC_EVENT_STOP) { + fsm_newstate(fi, oldstate); + ctcm_ccw_check_rc(ch, rc, (char *)__FUNCTION__); + } + } +} + +/** + * Cleanup helper for chx_fail and chx_stopped + * cleanup channels queue and notify interface statemachine. + * + * fi An instance of a channel statemachine. + * state The next state (depending on caller). + * ch The channel to operate on. + */ +static void ctcm_chx_cleanup(fsm_instance *fi, int state, + struct channel *ch) +{ + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__); + + fsm_deltimer(&ch->timer); + if (IS_MPC(ch)) + fsm_deltimer(&ch->sweep_timer); + + fsm_newstate(fi, state); + if (state == CTC_STATE_STOPPED && ch->trans_skb != NULL) { + clear_normalized_cda(&ch->ccw[1]); + dev_kfree_skb_any(ch->trans_skb); + ch->trans_skb = NULL; + } + + ch->th_seg = 0x00; + ch->th_seq_num = 0x00; + if (CHANNEL_DIRECTION(ch->flags) == READ) { + skb_queue_purge(&ch->io_queue); + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); + } else { + ctcm_purge_skb_queue(&ch->io_queue); + if (IS_MPC(ch)) + ctcm_purge_skb_queue(&ch->sweep_queue); + spin_lock(&ch->collect_lock); + ctcm_purge_skb_queue(&ch->collect_queue); + ch->collect_len = 0; + spin_unlock(&ch->collect_lock); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + } +} + +/** + * A channel has successfully been halted. + * Cleanup it's queue and notify interface statemachine. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_stopped(fsm_instance *fi, int event, void *arg) +{ + CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__); + ctcm_chx_cleanup(fi, CTC_STATE_STOPPED, arg); +} + +/** + * A stop command from device statemachine arrived and we are in + * not operational mode. Set state to stopped. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_stop(fsm_instance *fi, int event, void *arg) +{ + fsm_newstate(fi, CTC_STATE_STOPPED); +} + +/** + * A machine check for no path, not operational status or gone device has + * happened. + * Cleanup queue and notify interface statemachine. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_fail(fsm_instance *fi, int event, void *arg) +{ + CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__); + ctcm_chx_cleanup(fi, CTC_STATE_NOTOP, arg); +} + +/** + * Handle error during setup of channel. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + /* + * Special case: Got UC_RCRESET on setmode. + * This means that remote side isn't setup. In this case + * simply retry after some 10 secs... + */ + if ((fsm_getstate(fi) == CTC_STATE_SETUPWAIT) && + ((event == CTC_EVENT_UC_RCRESET) || + (event == CTC_EVENT_UC_RSRESET))) { + fsm_newstate(fi, CTC_STATE_STARTRETRY); + fsm_deltimer(&ch->timer); + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + if (!IS_MPC(ch) && (CHANNEL_DIRECTION(ch->flags) == READ)) { + int rc = ccw_device_halt(ch->cdev, (unsigned long)ch); + if (rc != 0) + ctcm_ccw_check_rc(ch, rc, + "HaltIO in chx_setuperr"); + } + return; + } + + CTCM_DBF_TEXT_(ERROR, CTC_DBF_CRIT, + "%s : %s error during %s channel setup state=%s\n", + dev->name, ctc_ch_event_names[event], + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX", + fsm_getstate_str(fi)); + + if (CHANNEL_DIRECTION(ch->flags) == READ) { + fsm_newstate(fi, CTC_STATE_RXERR); + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); + } else { + fsm_newstate(fi, CTC_STATE_TXERR); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + } +} + +/** + * Restart a channel after an error. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_restart(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + unsigned long saveflags = 0; + int oldstate; + int rc; + + CTCM_DBF_TEXT(TRACE, CTC_DBF_NOTICE, __FUNCTION__); + fsm_deltimer(&ch->timer); + ctcm_pr_debug("%s: %s channel restart\n", dev->name, + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + oldstate = fsm_getstate(fi); + fsm_newstate(fi, CTC_STATE_STARTWAIT); + if (event == CTC_EVENT_TIMER) /* only for timer not yet locked */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + /* Such conditional locking is a known problem for + * sparse because its undeterministic in static view. + * Warnings should be ignored here. */ + rc = ccw_device_halt(ch->cdev, (unsigned long)ch); + if (event == CTC_EVENT_TIMER) + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + if (rc != 0) { + if (rc != -EBUSY) { + fsm_deltimer(&ch->timer); + fsm_newstate(fi, oldstate); + } + ctcm_ccw_check_rc(ch, rc, "HaltIO in ctcm_chx_restart"); + } +} + +/** + * Handle error during RX initial handshake (exchange of + * 0-length block header) + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_TEXT(SETUP, 3, __FUNCTION__); + if (event == CTC_EVENT_TIMER) { + if (!IS_MPCDEV(dev)) + /* TODO : check if MPC deletes timer somewhere */ + fsm_deltimer(&ch->timer); + ctcm_pr_debug("%s: Timeout during RX init handshake\n", + dev->name); + if (ch->retry++ < 3) + ctcm_chx_restart(fi, event, arg); + else { + fsm_newstate(fi, CTC_STATE_RXERR); + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); + } + } else + ctcm_pr_warn("%s: Error during RX init handshake\n", dev->name); +} + +/** + * Notify device statemachine if we gave up initialization + * of RX channel. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_TEXT(SETUP, 3, __FUNCTION__); + fsm_newstate(fi, CTC_STATE_RXERR); + ctcm_pr_warn("%s: RX busy. Initialization failed\n", dev->name); + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); +} + +/** + * Handle RX Unit check remote reset (remote disconnected) + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct channel *ch2; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_DEV_NAME(TRACE, dev, "Got remote disconnect, re-initializing"); + fsm_deltimer(&ch->timer); + if (do_debug) + ctcm_pr_debug("%s: Got remote disconnect, " + "re-initializing ...\n", dev->name); + /* + * Notify device statemachine + */ + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + + fsm_newstate(fi, CTC_STATE_DTERM); + ch2 = priv->channel[WRITE]; + fsm_newstate(ch2->fsm, CTC_STATE_DTERM); + + ccw_device_halt(ch->cdev, (unsigned long)ch); + ccw_device_halt(ch2->cdev, (unsigned long)ch2); +} + +/** + * Handle error during TX channel initialization. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + if (event == CTC_EVENT_TIMER) { + fsm_deltimer(&ch->timer); + CTCM_DBF_DEV_NAME(ERROR, dev, + "Timeout during TX init handshake"); + if (ch->retry++ < 3) + ctcm_chx_restart(fi, event, arg); + else { + fsm_newstate(fi, CTC_STATE_TXERR); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + } + } else { + CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR, + "%s : %s error during channel setup state=%s", + dev->name, ctc_ch_event_names[event], + fsm_getstate_str(fi)); + + ctcm_pr_warn("%s: Error during TX init handshake\n", dev->name); + } +} + +/** + * Handle TX timeout by retrying operation. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct sk_buff *skb; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + + fsm_deltimer(&ch->timer); + if (ch->retry++ > 3) { + struct mpc_group *gptr = priv->mpcg; + ctcm_pr_debug("%s: TX retry failed, restarting channel\n", + dev->name); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + /* call restart if not MPC or if MPC and mpcg fsm is ready. + use gptr as mpc indicator */ + if (!(gptr && (fsm_getstate(gptr->fsm) != MPCG_STATE_READY))) + ctcm_chx_restart(fi, event, arg); + goto done; + } + + ctcm_pr_debug("%s: TX retry %d\n", dev->name, ch->retry); + skb = skb_peek(&ch->io_queue); + if (skb) { + int rc = 0; + unsigned long saveflags = 0; + clear_normalized_cda(&ch->ccw[4]); + ch->ccw[4].count = skb->len; + if (set_normalized_cda(&ch->ccw[4], skb->data)) { + ctcm_pr_debug("%s: IDAL alloc failed, chan restart\n", + dev->name); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + ctcm_chx_restart(fi, event, arg); + goto done; + } + fsm_addtimer(&ch->timer, 1000, CTC_EVENT_TIMER, ch); + if (event == CTC_EVENT_TIMER) /* for TIMER not yet locked */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + /* Such conditional locking is a known problem for + * sparse because its undeterministic in static view. + * Warnings should be ignored here. */ + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[3], + sizeof(struct ccw1) * 3); + + rc = ccw_device_start(ch->cdev, &ch->ccw[3], + (unsigned long)ch, 0xff, 0); + if (event == CTC_EVENT_TIMER) + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), + saveflags); + if (rc != 0) { + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "TX in chx_txretry"); + ctcm_purge_skb_queue(&ch->io_queue); + } + } +done: + return; +} + +/** + * Handle fatal errors during an I/O command. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__); + fsm_deltimer(&ch->timer); + ctcm_pr_warn("%s %s : unrecoverable channel error\n", + CTC_DRIVER_NAME, dev->name); + if (IS_MPC(ch)) { + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + } + + if (CHANNEL_DIRECTION(ch->flags) == READ) { + ctcm_pr_debug("%s: RX I/O error\n", dev->name); + fsm_newstate(fi, CTC_STATE_RXERR); + fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev); + } else { + ctcm_pr_debug("%s: TX I/O error\n", dev->name); + fsm_newstate(fi, CTC_STATE_TXERR); + fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev); + } +} + +/* + * The ctcm statemachine for a channel. + */ +const fsm_node ch_fsm[] = { + { CTC_STATE_STOPPED, CTC_EVENT_STOP, ctcm_action_nop }, + { CTC_STATE_STOPPED, CTC_EVENT_START, ctcm_chx_start }, + { CTC_STATE_STOPPED, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CTC_STATE_STOPPED, CTC_EVENT_MC_FAIL, ctcm_action_nop }, + + { CTC_STATE_NOTOP, CTC_EVENT_STOP, ctcm_chx_stop }, + { CTC_STATE_NOTOP, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_MC_FAIL, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_MC_GOOD, ctcm_chx_start }, + + { CTC_STATE_STARTWAIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_STARTWAIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_STARTWAIT, CTC_EVENT_FINSTAT, ctcm_chx_setmode }, + { CTC_STATE_STARTWAIT, CTC_EVENT_TIMER, ctcm_chx_setuperr }, + { CTC_STATE_STARTWAIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_STARTWAIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_STARTRETRY, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_STARTRETRY, CTC_EVENT_TIMER, ctcm_chx_setmode }, + { CTC_STATE_STARTRETRY, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CTC_STATE_STARTRETRY, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_SETUPWAIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_FINSTAT, chx_firstio }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_TIMER, ctcm_chx_setmode }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_RXINIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_RXINIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_RXINIT, CTC_EVENT_FINSTAT, chx_rxidle }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_RCRESET, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_RSRESET, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_TIMER, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_ATTNBUSY, ctcm_chx_rxinitfail }, + { CTC_STATE_RXINIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_ZERO, chx_firstio }, + { CTC_STATE_RXINIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_RXIDLE, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_RXIDLE, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_RXIDLE, CTC_EVENT_FINSTAT, chx_rx }, + { CTC_STATE_RXIDLE, CTC_EVENT_UC_RCRESET, ctcm_chx_rxdisc }, + { CTC_STATE_RXIDLE, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_RXIDLE, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_RXIDLE, CTC_EVENT_UC_ZERO, chx_rx }, + + { CTC_STATE_TXINIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXINIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TXINIT, CTC_EVENT_FINSTAT, ctcm_chx_txidle }, + { CTC_STATE_TXINIT, CTC_EVENT_UC_RCRESET, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_UC_RSRESET, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_TIMER, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TXINIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_TXIDLE, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXIDLE, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TXIDLE, CTC_EVENT_FINSTAT, chx_firstio }, + { CTC_STATE_TXIDLE, CTC_EVENT_UC_RCRESET, ctcm_action_nop }, + { CTC_STATE_TXIDLE, CTC_EVENT_UC_RSRESET, ctcm_action_nop }, + { CTC_STATE_TXIDLE, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TXIDLE, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_TERM, CTC_EVENT_STOP, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_START, ctcm_chx_restart }, + { CTC_STATE_TERM, CTC_EVENT_FINSTAT, ctcm_chx_stopped }, + { CTC_STATE_TERM, CTC_EVENT_UC_RCRESET, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_UC_RSRESET, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_DTERM, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_DTERM, CTC_EVENT_START, ctcm_chx_restart }, + { CTC_STATE_DTERM, CTC_EVENT_FINSTAT, ctcm_chx_setmode }, + { CTC_STATE_DTERM, CTC_EVENT_UC_RCRESET, ctcm_action_nop }, + { CTC_STATE_DTERM, CTC_EVENT_UC_RSRESET, ctcm_action_nop }, + { CTC_STATE_DTERM, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_TX, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TX, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TX, CTC_EVENT_FINSTAT, chx_txdone }, + { CTC_STATE_TX, CTC_EVENT_UC_RCRESET, ctcm_chx_txretry }, + { CTC_STATE_TX, CTC_EVENT_UC_RSRESET, ctcm_chx_txretry }, + { CTC_STATE_TX, CTC_EVENT_TIMER, ctcm_chx_txretry }, + { CTC_STATE_TX, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TX, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_RXERR, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXERR, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXERR, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_RXERR, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, +}; + +int ch_fsm_len = ARRAY_SIZE(ch_fsm); + +/* + * MPC actions for mpc channel statemachine + * handling of MPC protocol requires extra + * statemachine and actions which are prefixed ctcmpc_ . + * The ctc_ch_states and ctc_ch_state_names, + * ctc_ch_events and ctc_ch_event_names share the ctcm definitions + * which are expanded by some elements. + */ + +/* + * Actions for mpc channel statemachine. + */ + +/** + * Normal data has been send. Free the corresponding + * skb (it's in io_queue), reset dev->tbusy and + * revert to idle state. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct sk_buff *skb; + int first = 1; + int i; + struct timespec done_stamp; + __u32 data_space; + unsigned long duration; + struct sk_buff *peekskb; + int rc; + struct th_header *header; + struct pdu *p_header; + + if (do_debug) + ctcm_pr_debug("%s cp:%i enter: %s()\n", + dev->name, smp_processor_id(), __FUNCTION__); + + done_stamp = current_kernel_time(); /* xtime */ + duration = (done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000 + + (done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000; + if (duration > ch->prof.tx_time) + ch->prof.tx_time = duration; + + if (ch->irb->scsw.count != 0) + ctcm_pr_debug("%s: TX not complete, remaining %d bytes\n", + dev->name, ch->irb->scsw.count); + fsm_deltimer(&ch->timer); + while ((skb = skb_dequeue(&ch->io_queue))) { + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len - TH_HEADER_LENGTH; + if (first) { + priv->stats.tx_bytes += 2; + first = 0; + } + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + } + spin_lock(&ch->collect_lock); + clear_normalized_cda(&ch->ccw[4]); + + if ((ch->collect_len <= 0) || (grp->in_sweep != 0)) { + spin_unlock(&ch->collect_lock); + fsm_newstate(fi, CTC_STATE_TXIDLE); + goto done; + } + + if (ctcm_checkalloc_buffer(ch)) { + spin_unlock(&ch->collect_lock); + goto done; + } + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + if (ch->prof.maxmulti < (ch->collect_len + TH_HEADER_LENGTH)) + ch->prof.maxmulti = ch->collect_len + TH_HEADER_LENGTH; + if (ch->prof.maxcqueue < skb_queue_len(&ch->collect_queue)) + ch->prof.maxcqueue = skb_queue_len(&ch->collect_queue); + i = 0; + + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() building " + "trans_skb from collect_q \n", __FUNCTION__); + + data_space = grp->group_max_buflen - TH_HEADER_LENGTH; + + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() building trans_skb from collect_q" + " data_space:%04x\n", __FUNCTION__, data_space); + p_header = NULL; + while ((skb = skb_dequeue(&ch->collect_queue))) { + memcpy(skb_put(ch->trans_skb, skb->len), skb->data, skb->len); + p_header = (struct pdu *) + (skb_tail_pointer(ch->trans_skb) - skb->len); + p_header->pdu_flag = 0x00; + if (skb->protocol == ntohs(ETH_P_SNAP)) + p_header->pdu_flag |= 0x60; + else + p_header->pdu_flag |= 0x20; + + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s()trans_skb len:%04x \n", + __FUNCTION__, ch->trans_skb->len); + ctcm_pr_debug("ctcmpc: %s() pdu header and data" + " for up to 32 bytes sent to vtam\n", + __FUNCTION__); + ctcmpc_dumpit((char *)p_header, + min_t(int, skb->len, 32)); + } + ch->collect_len -= skb->len; + data_space -= skb->len; + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len; + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + peekskb = skb_peek(&ch->collect_queue); + if (peekskb->len > data_space) + break; + i++; + } + /* p_header points to the last one we handled */ + if (p_header) + p_header->pdu_flag |= PDU_LAST; /*Say it's the last one*/ + header = kzalloc(TH_HEADER_LENGTH, gfp_type()); + + if (!header) { + printk(KERN_WARNING "ctcmpc: OUT OF MEMORY IN %s()" + ": Data Lost \n", __FUNCTION__); + spin_unlock(&ch->collect_lock); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + header->th_ch_flag = TH_HAS_PDU; /* Normal data */ + ch->th_seq_num++; + header->th_seq_num = ch->th_seq_num; + + if (do_debug_data) + ctcm_pr_debug("%s: ToVTAM_th_seq= %08x\n" , + __FUNCTION__, ch->th_seq_num); + + memcpy(skb_push(ch->trans_skb, TH_HEADER_LENGTH), header, + TH_HEADER_LENGTH); /* put the TH on the packet */ + + kfree(header); + + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s()trans_skb len:%04x \n", + __FUNCTION__, ch->trans_skb->len); + + ctcm_pr_debug("ctcmpc: %s() up-to-50 bytes of trans_skb " + "data to vtam from collect_q\n", __FUNCTION__); + ctcmpc_dumpit((char *)ch->trans_skb->data, + min_t(int, ch->trans_skb->len, 50)); + } + + spin_unlock(&ch->collect_lock); + clear_normalized_cda(&ch->ccw[1]); + if (set_normalized_cda(&ch->ccw[1], ch->trans_skb->data)) { + dev_kfree_skb_any(ch->trans_skb); + ch->trans_skb = NULL; + printk(KERN_WARNING + "ctcmpc: %s()CCW failure - data lost\n", + __FUNCTION__); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + return; + } + ch->ccw[1].count = ch->trans_skb->len; + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + ch->prof.send_stamp = current_kernel_time(); /* xtime */ + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[0], sizeof(struct ccw1) * 3); + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + ch->prof.doios_multi++; + if (rc != 0) { + priv->stats.tx_dropped += i; + priv->stats.tx_errors += i; + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "chained TX"); + } +done: + ctcm_clear_busy(dev); + ctcm_pr_debug("ctcmpc exit: %s %s()\n", dev->name, __FUNCTION__); + return; +} + +/** + * Got normal data, check for sanity, queue it up, allocate new buffer + * trigger bottom half, and initiate next read. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct sk_buff *skb = ch->trans_skb; + struct sk_buff *new_skb; + unsigned long saveflags = 0; /* avoids compiler warning */ + int len = ch->max_bufsize - ch->irb->scsw.count; + + if (do_debug_data) { + CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG, "mpc_ch_rx %s cp:%i %s\n", + dev->name, smp_processor_id(), ch->id); + CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG, "mpc_ch_rx: maxbuf: %04x " + "len: %04x\n", ch->max_bufsize, len); + } + fsm_deltimer(&ch->timer); + + if (skb == NULL) { + ctcm_pr_debug("ctcmpc exit: %s() TRANS_SKB = NULL \n", + __FUNCTION__); + goto again; + } + + if (len < TH_HEADER_LENGTH) { + ctcm_pr_info("%s: got packet with invalid length %d\n", + dev->name, len); + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + } else { + /* must have valid th header or game over */ + __u32 block_len = len; + len = TH_HEADER_LENGTH + XID2_LENGTH + 4; + new_skb = __dev_alloc_skb(ch->max_bufsize, GFP_ATOMIC); + + if (new_skb == NULL) { + printk(KERN_INFO "ctcmpc:%s() NEW_SKB = NULL\n", + __FUNCTION__); + printk(KERN_WARNING "ctcmpc: %s() MEMORY ALLOC FAILED" + " - DATA LOST - MPC FAILED\n", + __FUNCTION__); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto again; + } + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_RESET: + case MPCG_STATE_INOP: + dev_kfree_skb_any(new_skb); + break; + case MPCG_STATE_FLOWC: + case MPCG_STATE_READY: + memcpy(skb_put(new_skb, block_len), + skb->data, block_len); + skb_queue_tail(&ch->io_queue, new_skb); + tasklet_schedule(&ch->ch_tasklet); + break; + default: + memcpy(skb_put(new_skb, len), skb->data, len); + skb_queue_tail(&ch->io_queue, new_skb); + tasklet_hi_schedule(&ch->ch_tasklet); + break; + } + } + +again: + switch (fsm_getstate(grp->fsm)) { + int rc, dolock; + case MPCG_STATE_FLOWC: + case MPCG_STATE_READY: + if (ctcm_checkalloc_buffer(ch)) + break; + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + ch->ccw[1].count = ch->max_bufsize; + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[0], + sizeof(struct ccw1) * 3); + dolock = !in_irq(); + if (dolock) + spin_lock_irqsave( + get_ccwdev_lock(ch->cdev), saveflags); + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + if (dolock) /* see remark about conditional locking */ + spin_unlock_irqrestore( + get_ccwdev_lock(ch->cdev), saveflags); + if (rc != 0) + ctcm_ccw_check_rc(ch, rc, "normal RX"); + default: + break; + } + + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n", + dev->name, __FUNCTION__, ch, ch->id); + +} + +/** + * Initialize connection by sending a __u16 of value 0. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + + if (do_debug) { + struct mpc_group *gptr = priv->mpcg; + ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + ctcm_pr_debug("%s() %s chstate:%i grpstate:%i chprotocol:%i\n", + __FUNCTION__, ch->id, fsm_getstate(fi), + fsm_getstate(gptr->fsm), ch->protocol); + } + if (fsm_getstate(fi) == CTC_STATE_TXIDLE) + MPC_DBF_DEV_NAME(TRACE, dev, "remote side issued READ? "); + + fsm_deltimer(&ch->timer); + if (ctcm_checkalloc_buffer(ch)) + goto done; + + switch (fsm_getstate(fi)) { + case CTC_STATE_STARTRETRY: + case CTC_STATE_SETUPWAIT: + if (CHANNEL_DIRECTION(ch->flags) == READ) { + ctcmpc_chx_rxidle(fi, event, arg); + } else { + fsm_newstate(fi, CTC_STATE_TXIDLE); + fsm_event(priv->fsm, DEV_EVENT_TXUP, dev); + } + goto done; + default: + break; + }; + + fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == READ) + ? CTC_STATE_RXINIT : CTC_STATE_TXINIT); + +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + return; +} + +/** + * Got initial data, check it. If OK, + * notify device statemachine that we are up and + * running. + * + * fi An instance of a channel statemachine. + * event The event, just happened. + * arg Generic pointer, casted from channel * upon call. + */ +void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + int rc; + unsigned long saveflags = 0; /* avoids compiler warning */ + + fsm_deltimer(&ch->timer); + ctcm_pr_debug("%s cp:%i enter: %s()\n", + dev->name, smp_processor_id(), __FUNCTION__); + if (do_debug) + ctcm_pr_debug("%s() %s chstate:%i grpstate:%i\n", + __FUNCTION__, ch->id, + fsm_getstate(fi), fsm_getstate(grp->fsm)); + + fsm_newstate(fi, CTC_STATE_RXIDLE); + /* XID processing complete */ + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_FLOWC: + case MPCG_STATE_READY: + if (ctcm_checkalloc_buffer(ch)) + goto done; + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + ch->ccw[1].count = ch->max_bufsize; + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[0], + sizeof(struct ccw1) * 3); + if (event == CTC_EVENT_START) + /* see remark about conditional locking */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + rc = ccw_device_start(ch->cdev, &ch->ccw[0], + (unsigned long)ch, 0xff, 0); + if (event == CTC_EVENT_START) + spin_unlock_irqrestore( + get_ccwdev_lock(ch->cdev), saveflags); + if (rc != 0) { + fsm_newstate(fi, CTC_STATE_RXINIT); + ctcm_ccw_check_rc(ch, rc, "initial RX"); + goto done; + } + break; + default: + break; + } + + fsm_event(priv->fsm, DEV_EVENT_RXUP, dev); +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit: %s %s()\n", + dev->name, __FUNCTION__); + return; +} + +/* + * ctcmpc channel FSM action + * called from several points in ctcmpc_ch_fsm + * ctcmpc only + */ +static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + if (do_debug) { + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s" + "GrpState:%s ChState:%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id, + fsm_getstate_str(grp->fsm), + fsm_getstate_str(ch->fsm)); + } + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID2INITW: + /* ok..start yside xid exchanges */ + if (!ch->in_mpcgroup) + break; + if (fsm_getstate(ch->fsm) == CH_XID0_PENDING) { + fsm_deltimer(&grp->timer); + fsm_addtimer(&grp->timer, + MPC_XID_TIMEOUT_VALUE, + MPCG_EVENT_TIMER, dev); + fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch); + + } else if (fsm_getstate(ch->fsm) < CH_XID7_PENDING1) + /* attn rcvd before xid0 processed via bh */ + fsm_newstate(ch->fsm, CH_XID7_PENDING1); + break; + case MPCG_STATE_XID2INITX: + case MPCG_STATE_XID0IOWAIT: + case MPCG_STATE_XID0IOWAIX: + /* attn rcvd before xid0 processed on ch + but mid-xid0 processing for group */ + if (fsm_getstate(ch->fsm) < CH_XID7_PENDING1) + fsm_newstate(ch->fsm, CH_XID7_PENDING1); + break; + case MPCG_STATE_XID7INITW: + case MPCG_STATE_XID7INITX: + case MPCG_STATE_XID7INITI: + case MPCG_STATE_XID7INITZ: + switch (fsm_getstate(ch->fsm)) { + case CH_XID7_PENDING: + fsm_newstate(ch->fsm, CH_XID7_PENDING1); + break; + case CH_XID7_PENDING2: + fsm_newstate(ch->fsm, CH_XID7_PENDING3); + break; + } + fsm_event(grp->fsm, MPCG_EVENT_XID7DONE, dev); + break; + } + + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + return; + +} + +/* + * ctcmpc channel FSM action + * called from one point in ctcmpc_ch_fsm + * ctcmpc only + */ +static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + ctcm_pr_debug("ctcmpc enter: %s %s() %s \nGrpState:%s ChState:%s\n", + dev->name, + __FUNCTION__, ch->id, + fsm_getstate_str(grp->fsm), + fsm_getstate_str(ch->fsm)); + + fsm_deltimer(&ch->timer); + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID0IOWAIT: + /* vtam wants to be primary.start yside xid exchanges*/ + /* only receive one attn-busy at a time so must not */ + /* change state each time */ + grp->changed_side = 1; + fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW); + break; + case MPCG_STATE_XID2INITW: + if (grp->changed_side == 1) { + grp->changed_side = 2; + break; + } + /* process began via call to establish_conn */ + /* so must report failure instead of reverting */ + /* back to ready-for-xid passive state */ + if (grp->estconnfunc) + goto done; + /* this attnbusy is NOT the result of xside xid */ + /* collisions so yside must have been triggered */ + /* by an ATTN that was not intended to start XID */ + /* processing. Revert back to ready-for-xid and */ + /* wait for ATTN interrupt to signal xid start */ + if (fsm_getstate(ch->fsm) == CH_XID0_INPROGRESS) { + fsm_newstate(ch->fsm, CH_XID0_PENDING) ; + fsm_deltimer(&grp->timer); + goto done; + } + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + case MPCG_STATE_XID2INITX: + /* XID2 was received before ATTN Busy for second + channel.Send yside xid for second channel. + */ + if (grp->changed_side == 1) { + grp->changed_side = 2; + break; + } + case MPCG_STATE_XID0IOWAIX: + case MPCG_STATE_XID7INITW: + case MPCG_STATE_XID7INITX: + case MPCG_STATE_XID7INITI: + case MPCG_STATE_XID7INITZ: + default: + /* multiple attn-busy indicates too out-of-sync */ + /* and they are certainly not being received as part */ + /* of valid mpc group negotiations.. */ + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + if (grp->changed_side == 1) { + fsm_deltimer(&grp->timer); + fsm_addtimer(&grp->timer, MPC_XID_TIMEOUT_VALUE, + MPCG_EVENT_TIMER, dev); + } + if (ch->in_mpcgroup) + fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch); + else + printk(KERN_WARNING "ctcmpc: %s() Not all channels have" + " been added to group\n", __FUNCTION__); + +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s()%s ch=0x%p id=%s\n", + __FUNCTION__, dev->name, ch, ch->id); + + return; + +} + +/* + * ctcmpc channel FSM action + * called from several points in ctcmpc_ch_fsm + * ctcmpc only + */ +static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg) +{ + struct channel *ch = arg; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + ctcm_pr_debug("ctcmpc enter: %s %s() %s \nGrpState:%s ChState:%s\n", + dev->name, __FUNCTION__, ch->id, + fsm_getstate_str(grp->fsm), + fsm_getstate_str(ch->fsm)); + + fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch); + + return; +} + +/* + * ctcmpc channel FSM action + * called from several points in ctcmpc_ch_fsm + * ctcmpc only + */ +static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg) +{ + struct channel *ach = arg; + struct net_device *dev = ach->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct channel *wch = priv->channel[WRITE]; + struct channel *rch = priv->channel[READ]; + struct sk_buff *skb; + struct th_sweep *header; + int rc = 0; + unsigned long saveflags = 0; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ach, ach->id); + + if (grp->in_sweep == 0) + goto done; + + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s() 1: ToVTAM_th_seq= %08x\n" , + __FUNCTION__, wch->th_seq_num); + ctcm_pr_debug("ctcmpc: %s() 1: FromVTAM_th_seq= %08x\n" , + __FUNCTION__, rch->th_seq_num); + } + + if (fsm_getstate(wch->fsm) != CTC_STATE_TXIDLE) { + /* give the previous IO time to complete */ + fsm_addtimer(&wch->sweep_timer, + 200, CTC_EVENT_RSWEEP_TIMER, wch); + goto done; + } + + skb = skb_dequeue(&wch->sweep_queue); + if (!skb) + goto done; + + if (set_normalized_cda(&wch->ccw[4], skb->data)) { + grp->in_sweep = 0; + ctcm_clear_busy_do(dev); + dev_kfree_skb_any(skb); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + } else { + atomic_inc(&skb->users); + skb_queue_tail(&wch->io_queue, skb); + } + + /* send out the sweep */ + wch->ccw[4].count = skb->len; + + header = (struct th_sweep *)skb->data; + switch (header->th.th_ch_flag) { + case TH_SWEEP_REQ: + grp->sweep_req_pend_num--; + break; + case TH_SWEEP_RESP: + grp->sweep_rsp_pend_num--; + break; + } + + header->sw.th_last_seq = wch->th_seq_num; + + if (do_debug_ccw) + ctcmpc_dumpit((char *)&wch->ccw[3], sizeof(struct ccw1) * 3); + + ctcm_pr_debug("ctcmpc: %s() sweep packet\n", __FUNCTION__); + ctcmpc_dumpit((char *)header, TH_SWEEP_LENGTH); + + fsm_addtimer(&wch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, wch); + fsm_newstate(wch->fsm, CTC_STATE_TX); + + spin_lock_irqsave(get_ccwdev_lock(wch->cdev), saveflags); + wch->prof.send_stamp = current_kernel_time(); /* xtime */ + rc = ccw_device_start(wch->cdev, &wch->ccw[3], + (unsigned long) wch, 0xff, 0); + spin_unlock_irqrestore(get_ccwdev_lock(wch->cdev), saveflags); + + if ((grp->sweep_req_pend_num == 0) && + (grp->sweep_rsp_pend_num == 0)) { + grp->in_sweep = 0; + rch->th_seq_num = 0x00; + wch->th_seq_num = 0x00; + ctcm_clear_busy_do(dev); + } + + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s()2: ToVTAM_th_seq= %08x\n" , + __FUNCTION__, wch->th_seq_num); + ctcm_pr_debug("ctcmpc: %s()2: FromVTAM_th_seq= %08x\n" , + __FUNCTION__, rch->th_seq_num); + } + + if (rc != 0) + ctcm_ccw_check_rc(wch, rc, "send sweep"); + +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit: %s() %s\n", __FUNCTION__, ach->id); + return; +} + + +/* + * The ctcmpc statemachine for a channel. + */ + +const fsm_node ctcmpc_ch_fsm[] = { + { CTC_STATE_STOPPED, CTC_EVENT_STOP, ctcm_action_nop }, + { CTC_STATE_STOPPED, CTC_EVENT_START, ctcm_chx_start }, + { CTC_STATE_STOPPED, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_STOPPED, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CTC_STATE_STOPPED, CTC_EVENT_MC_FAIL, ctcm_action_nop }, + + { CTC_STATE_NOTOP, CTC_EVENT_STOP, ctcm_chx_stop }, + { CTC_STATE_NOTOP, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_MC_FAIL, ctcm_action_nop }, + { CTC_STATE_NOTOP, CTC_EVENT_MC_GOOD, ctcm_chx_start }, + { CTC_STATE_NOTOP, CTC_EVENT_UC_RCRESET, ctcm_chx_stop }, + { CTC_STATE_NOTOP, CTC_EVENT_UC_RSRESET, ctcm_chx_stop }, + { CTC_STATE_NOTOP, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + + { CTC_STATE_STARTWAIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_STARTWAIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_STARTWAIT, CTC_EVENT_FINSTAT, ctcm_chx_setmode }, + { CTC_STATE_STARTWAIT, CTC_EVENT_TIMER, ctcm_chx_setuperr }, + { CTC_STATE_STARTWAIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_STARTWAIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_STARTRETRY, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_STARTRETRY, CTC_EVENT_TIMER, ctcm_chx_setmode }, + { CTC_STATE_STARTRETRY, CTC_EVENT_FINSTAT, ctcm_chx_setmode }, + { CTC_STATE_STARTRETRY, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_STARTRETRY, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + + { CTC_STATE_SETUPWAIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_FINSTAT, ctcmpc_chx_firstio }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_TIMER, ctcm_chx_setmode }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_SETUPWAIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CTC_STATE_RXINIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_RXINIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_RXINIT, CTC_EVENT_FINSTAT, ctcmpc_chx_rxidle }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_RCRESET, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_RSRESET, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_TIMER, ctcm_chx_rxiniterr }, + { CTC_STATE_RXINIT, CTC_EVENT_ATTNBUSY, ctcm_chx_rxinitfail }, + { CTC_STATE_RXINIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_RXINIT, CTC_EVENT_UC_ZERO, ctcmpc_chx_firstio }, + { CTC_STATE_RXINIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + + { CH_XID0_PENDING, CTC_EVENT_FINSTAT, ctcm_action_nop }, + { CH_XID0_PENDING, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID0_PENDING, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID0_PENDING, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID0_PENDING, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID0_PENDING, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID0_PENDING, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID0_PENDING, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID0_PENDING, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID0_PENDING, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + + { CH_XID0_INPROGRESS, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID0_INPROGRESS, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID0_INPROGRESS, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID0_INPROGRESS, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID0_INPROGRESS, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID0_INPROGRESS, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID0_INPROGRESS, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID0_INPROGRESS, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID0_INPROGRESS, CTC_EVENT_ATTNBUSY, ctcmpc_chx_attnbusy }, + { CH_XID0_INPROGRESS, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID0_INPROGRESS, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CH_XID7_PENDING, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID7_PENDING, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID7_PENDING, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID7_PENDING, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID7_PENDING, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID7_PENDING, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID7_PENDING, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID7_PENDING, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + { CH_XID7_PENDING, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID7_PENDING, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CH_XID7_PENDING1, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID7_PENDING1, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID7_PENDING1, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID7_PENDING1, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID7_PENDING1, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID7_PENDING1, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID7_PENDING1, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID7_PENDING1, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING1, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING1, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + { CH_XID7_PENDING1, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID7_PENDING1, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CH_XID7_PENDING2, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID7_PENDING2, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID7_PENDING2, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID7_PENDING2, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID7_PENDING2, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID7_PENDING2, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID7_PENDING2, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID7_PENDING2, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING2, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING2, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + { CH_XID7_PENDING2, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID7_PENDING2, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CH_XID7_PENDING3, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID7_PENDING3, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID7_PENDING3, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID7_PENDING3, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID7_PENDING3, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID7_PENDING3, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID7_PENDING3, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID7_PENDING3, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING3, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING3, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + { CH_XID7_PENDING3, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID7_PENDING3, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CH_XID7_PENDING4, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CH_XID7_PENDING4, CTC_EVENT_ATTN, ctcmpc_chx_attn }, + { CH_XID7_PENDING4, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CH_XID7_PENDING4, CTC_EVENT_START, ctcm_action_nop }, + { CH_XID7_PENDING4, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CH_XID7_PENDING4, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CH_XID7_PENDING4, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + { CH_XID7_PENDING4, CTC_EVENT_UC_RCRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING4, CTC_EVENT_UC_RSRESET, ctcm_chx_setuperr }, + { CH_XID7_PENDING4, CTC_EVENT_ATTNBUSY, ctcm_chx_iofatal }, + { CH_XID7_PENDING4, CTC_EVENT_TIMER, ctcmpc_chx_resend }, + { CH_XID7_PENDING4, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CTC_STATE_RXIDLE, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_RXIDLE, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_RXIDLE, CTC_EVENT_FINSTAT, ctcmpc_chx_rx }, + { CTC_STATE_RXIDLE, CTC_EVENT_UC_RCRESET, ctcm_chx_rxdisc }, + { CTC_STATE_RXIDLE, CTC_EVENT_UC_RSRESET, ctcm_chx_fail }, + { CTC_STATE_RXIDLE, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_RXIDLE, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_RXIDLE, CTC_EVENT_UC_ZERO, ctcmpc_chx_rx }, + + { CTC_STATE_TXINIT, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXINIT, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TXINIT, CTC_EVENT_FINSTAT, ctcm_chx_txidle }, + { CTC_STATE_TXINIT, CTC_EVENT_UC_RCRESET, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_UC_RSRESET, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_TIMER, ctcm_chx_txiniterr }, + { CTC_STATE_TXINIT, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TXINIT, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_TXINIT, CTC_EVENT_RSWEEP_TIMER, ctcmpc_chx_send_sweep }, + + { CTC_STATE_TXIDLE, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXIDLE, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TXIDLE, CTC_EVENT_FINSTAT, ctcmpc_chx_firstio }, + { CTC_STATE_TXIDLE, CTC_EVENT_UC_RCRESET, ctcm_chx_fail }, + { CTC_STATE_TXIDLE, CTC_EVENT_UC_RSRESET, ctcm_chx_fail }, + { CTC_STATE_TXIDLE, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TXIDLE, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_TXIDLE, CTC_EVENT_RSWEEP_TIMER, ctcmpc_chx_send_sweep }, + + { CTC_STATE_TERM, CTC_EVENT_STOP, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_START, ctcm_chx_restart }, + { CTC_STATE_TERM, CTC_EVENT_FINSTAT, ctcm_chx_stopped }, + { CTC_STATE_TERM, CTC_EVENT_UC_RCRESET, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_UC_RSRESET, ctcm_action_nop }, + { CTC_STATE_TERM, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_TERM, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + { CTC_STATE_TERM, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + + { CTC_STATE_DTERM, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_DTERM, CTC_EVENT_START, ctcm_chx_restart }, + { CTC_STATE_DTERM, CTC_EVENT_FINSTAT, ctcm_chx_setmode }, + { CTC_STATE_DTERM, CTC_EVENT_UC_RCRESET, ctcm_action_nop }, + { CTC_STATE_DTERM, CTC_EVENT_UC_RSRESET, ctcm_action_nop }, + { CTC_STATE_DTERM, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_DTERM, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + + { CTC_STATE_TX, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TX, CTC_EVENT_START, ctcm_action_nop }, + { CTC_STATE_TX, CTC_EVENT_FINSTAT, ctcmpc_chx_txdone }, + { CTC_STATE_TX, CTC_EVENT_UC_RCRESET, ctcm_chx_fail }, + { CTC_STATE_TX, CTC_EVENT_UC_RSRESET, ctcm_chx_fail }, + { CTC_STATE_TX, CTC_EVENT_TIMER, ctcm_chx_txretry }, + { CTC_STATE_TX, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TX, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_TX, CTC_EVENT_RSWEEP_TIMER, ctcmpc_chx_send_sweep }, + { CTC_STATE_TX, CTC_EVENT_IO_EBUSY, ctcm_chx_fail }, + + { CTC_STATE_RXERR, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXERR, CTC_EVENT_STOP, ctcm_chx_haltio }, + { CTC_STATE_TXERR, CTC_EVENT_IO_ENODEV, ctcm_chx_iofatal }, + { CTC_STATE_TXERR, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, + { CTC_STATE_RXERR, CTC_EVENT_MC_FAIL, ctcm_chx_fail }, +}; + +int mpc_ch_fsm_len = ARRAY_SIZE(ctcmpc_ch_fsm); + +/* + * Actions for interface - statemachine. + */ + +/** + * Startup channels by sending CTC_EVENT_START to each channel. + * + * fi An instance of an interface statemachine. + * event The event, just happened. + * arg Generic pointer, casted from struct net_device * upon call. + */ +static void dev_action_start(fsm_instance *fi, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv = dev->priv; + int direction; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + + fsm_deltimer(&priv->restart_timer); + fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); + if (IS_MPC(priv)) + priv->mpcg->channels_terminating = 0; + for (direction = READ; direction <= WRITE; direction++) { + struct channel *ch = priv->channel[direction]; + fsm_event(ch->fsm, CTC_EVENT_START, ch); + } +} + +/** + * Shutdown channels by sending CTC_EVENT_STOP to each channel. + * + * fi An instance of an interface statemachine. + * event The event, just happened. + * arg Generic pointer, casted from struct net_device * upon call. + */ +static void dev_action_stop(fsm_instance *fi, int event, void *arg) +{ + int direction; + struct net_device *dev = arg; + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + + fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); + for (direction = READ; direction <= WRITE; direction++) { + struct channel *ch = priv->channel[direction]; + fsm_event(ch->fsm, CTC_EVENT_STOP, ch); + ch->th_seq_num = 0x00; + if (do_debug) + ctcm_pr_debug("ctcm: %s() CH_th_seq= %08x\n", + __FUNCTION__, ch->th_seq_num); + } + if (IS_MPC(priv)) + fsm_newstate(priv->mpcg->fsm, MPCG_STATE_RESET); +} + +static void dev_action_restart(fsm_instance *fi, int event, void *arg) +{ + int restart_timer; + struct net_device *dev = arg; + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(TRACE, dev, ""); + + if (IS_MPC(priv)) { + ctcm_pr_info("ctcm: %s Restarting Device and " + "MPC Group in 5 seconds\n", + dev->name); + restart_timer = CTCM_TIME_1_SEC; + } else { + ctcm_pr_info("%s: Restarting\n", dev->name); + restart_timer = CTCM_TIME_5_SEC; + } + + dev_action_stop(fi, event, arg); + fsm_event(priv->fsm, DEV_EVENT_STOP, dev); + if (IS_MPC(priv)) + fsm_newstate(priv->mpcg->fsm, MPCG_STATE_RESET); + + /* going back into start sequence too quickly can */ + /* result in the other side becoming unreachable due */ + /* to sense reported when IO is aborted */ + fsm_addtimer(&priv->restart_timer, restart_timer, + DEV_EVENT_START, dev); +} + +/** + * Called from channel statemachine + * when a channel is up and running. + * + * fi An instance of an interface statemachine. + * event The event, just happened. + * arg Generic pointer, casted from struct net_device * upon call. + */ +static void dev_action_chup(fsm_instance *fi, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + + switch (fsm_getstate(fi)) { + case DEV_STATE_STARTWAIT_RXTX: + if (event == DEV_EVENT_RXUP) + fsm_newstate(fi, DEV_STATE_STARTWAIT_TX); + else + fsm_newstate(fi, DEV_STATE_STARTWAIT_RX); + break; + case DEV_STATE_STARTWAIT_RX: + if (event == DEV_EVENT_RXUP) { + fsm_newstate(fi, DEV_STATE_RUNNING); + ctcm_pr_info("%s: connected with remote side\n", + dev->name); + ctcm_clear_busy(dev); + } + break; + case DEV_STATE_STARTWAIT_TX: + if (event == DEV_EVENT_TXUP) { + fsm_newstate(fi, DEV_STATE_RUNNING); + ctcm_pr_info("%s: connected with remote side\n", + dev->name); + ctcm_clear_busy(dev); + } + break; + case DEV_STATE_STOPWAIT_TX: + if (event == DEV_EVENT_RXUP) + fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); + break; + case DEV_STATE_STOPWAIT_RX: + if (event == DEV_EVENT_TXUP) + fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); + break; + } + + if (IS_MPC(priv)) { + if (event == DEV_EVENT_RXUP) + mpc_channel_action(priv->channel[READ], + READ, MPC_CHANNEL_ADD); + else + mpc_channel_action(priv->channel[WRITE], + WRITE, MPC_CHANNEL_ADD); + } +} + +/** + * Called from device statemachine + * when a channel has been shutdown. + * + * fi An instance of an interface statemachine. + * event The event, just happened. + * arg Generic pointer, casted from struct net_device * upon call. + */ +static void dev_action_chdown(fsm_instance *fi, int event, void *arg) +{ + + struct net_device *dev = arg; + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + + switch (fsm_getstate(fi)) { + case DEV_STATE_RUNNING: + if (event == DEV_EVENT_TXDOWN) + fsm_newstate(fi, DEV_STATE_STARTWAIT_TX); + else + fsm_newstate(fi, DEV_STATE_STARTWAIT_RX); + break; + case DEV_STATE_STARTWAIT_RX: + if (event == DEV_EVENT_TXDOWN) + fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); + break; + case DEV_STATE_STARTWAIT_TX: + if (event == DEV_EVENT_RXDOWN) + fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); + break; + case DEV_STATE_STOPWAIT_RXTX: + if (event == DEV_EVENT_TXDOWN) + fsm_newstate(fi, DEV_STATE_STOPWAIT_RX); + else + fsm_newstate(fi, DEV_STATE_STOPWAIT_TX); + break; + case DEV_STATE_STOPWAIT_RX: + if (event == DEV_EVENT_RXDOWN) + fsm_newstate(fi, DEV_STATE_STOPPED); + break; + case DEV_STATE_STOPWAIT_TX: + if (event == DEV_EVENT_TXDOWN) + fsm_newstate(fi, DEV_STATE_STOPPED); + break; + } + if (IS_MPC(priv)) { + if (event == DEV_EVENT_RXDOWN) + mpc_channel_action(priv->channel[READ], + READ, MPC_CHANNEL_REMOVE); + else + mpc_channel_action(priv->channel[WRITE], + WRITE, MPC_CHANNEL_REMOVE); + } +} + +const fsm_node dev_fsm[] = { + { DEV_STATE_STOPPED, DEV_EVENT_START, dev_action_start }, + { DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_START, dev_action_start }, + { DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_RXDOWN, dev_action_chdown }, + { DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_TXDOWN, dev_action_chdown }, + { DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_STOPWAIT_RX, DEV_EVENT_START, dev_action_start }, + { DEV_STATE_STOPWAIT_RX, DEV_EVENT_RXUP, dev_action_chup }, + { DEV_STATE_STOPWAIT_RX, DEV_EVENT_TXUP, dev_action_chup }, + { DEV_STATE_STOPWAIT_RX, DEV_EVENT_RXDOWN, dev_action_chdown }, + { DEV_STATE_STOPWAIT_RX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_STOPWAIT_TX, DEV_EVENT_START, dev_action_start }, + { DEV_STATE_STOPWAIT_TX, DEV_EVENT_RXUP, dev_action_chup }, + { DEV_STATE_STOPWAIT_TX, DEV_EVENT_TXUP, dev_action_chup }, + { DEV_STATE_STOPWAIT_TX, DEV_EVENT_TXDOWN, dev_action_chdown }, + { DEV_STATE_STOPWAIT_TX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_STOP, dev_action_stop }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_TXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RXDOWN, dev_action_chdown }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_TXDOWN, dev_action_chdown }, + { DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_STARTWAIT_TX, DEV_EVENT_STOP, dev_action_stop }, + { DEV_STATE_STARTWAIT_TX, DEV_EVENT_RXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_TX, DEV_EVENT_TXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_TX, DEV_EVENT_RXDOWN, dev_action_chdown }, + { DEV_STATE_STARTWAIT_TX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_STARTWAIT_RX, DEV_EVENT_STOP, dev_action_stop }, + { DEV_STATE_STARTWAIT_RX, DEV_EVENT_RXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_RX, DEV_EVENT_TXUP, dev_action_chup }, + { DEV_STATE_STARTWAIT_RX, DEV_EVENT_TXDOWN, dev_action_chdown }, + { DEV_STATE_STARTWAIT_RX, DEV_EVENT_RESTART, dev_action_restart }, + { DEV_STATE_RUNNING, DEV_EVENT_STOP, dev_action_stop }, + { DEV_STATE_RUNNING, DEV_EVENT_RXDOWN, dev_action_chdown }, + { DEV_STATE_RUNNING, DEV_EVENT_TXDOWN, dev_action_chdown }, + { DEV_STATE_RUNNING, DEV_EVENT_TXUP, ctcm_action_nop }, + { DEV_STATE_RUNNING, DEV_EVENT_RXUP, ctcm_action_nop }, + { DEV_STATE_RUNNING, DEV_EVENT_RESTART, dev_action_restart }, +}; + +int dev_fsm_len = ARRAY_SIZE(dev_fsm); + +/* --- This is the END my friend --- */ + diff --git a/drivers/s390/net/ctcm_fsms.h b/drivers/s390/net/ctcm_fsms.h new file mode 100644 index 0000000..2326aba --- /dev/null +++ b/drivers/s390/net/ctcm_fsms.h @@ -0,0 +1,359 @@ +/* + * drivers/s390/net/ctcm_fsms.h + * + * Copyright IBM Corp. 2001, 2007 + * Authors: Fritz Elfert (felfert@millenux.com) + * Peter Tiedemann (ptiedem@de.ibm.com) + * MPC additions : + * Belinda Thompson (belindat@us.ibm.com) + * Andy Richter (richtera@us.ibm.com) + */ +#ifndef _CTCM_FSMS_H_ +#define _CTCM_FSMS_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "fsm.h" +#include "cu3088.h" +#include "ctcm_main.h" + +/* + * Definitions for the channel statemachine(s) for ctc and ctcmpc + * + * To allow better kerntyping, prefix-less definitions for channel states + * and channel events have been replaced : + * ch_event... -> ctc_ch_event... + * CH_EVENT... -> CTC_EVENT... + * ch_state... -> ctc_ch_state... + * CH_STATE... -> CTC_STATE... + */ +/* + * Events of the channel statemachine(s) for ctc and ctcmpc + */ +enum ctc_ch_events { + /* + * Events, representing return code of + * I/O operations (ccw_device_start, ccw_device_halt et al.) + */ + CTC_EVENT_IO_SUCCESS, + CTC_EVENT_IO_EBUSY, + CTC_EVENT_IO_ENODEV, + CTC_EVENT_IO_UNKNOWN, + + CTC_EVENT_ATTNBUSY, + CTC_EVENT_ATTN, + CTC_EVENT_BUSY, + /* + * Events, representing unit-check + */ + CTC_EVENT_UC_RCRESET, + CTC_EVENT_UC_RSRESET, + CTC_EVENT_UC_TXTIMEOUT, + CTC_EVENT_UC_TXPARITY, + CTC_EVENT_UC_HWFAIL, + CTC_EVENT_UC_RXPARITY, + CTC_EVENT_UC_ZERO, + CTC_EVENT_UC_UNKNOWN, + /* + * Events, representing subchannel-check + */ + CTC_EVENT_SC_UNKNOWN, + /* + * Events, representing machine checks + */ + CTC_EVENT_MC_FAIL, + CTC_EVENT_MC_GOOD, + /* + * Event, representing normal IRQ + */ + CTC_EVENT_IRQ, + CTC_EVENT_FINSTAT, + /* + * Event, representing timer expiry. + */ + CTC_EVENT_TIMER, + /* + * Events, representing commands from upper levels. + */ + CTC_EVENT_START, + CTC_EVENT_STOP, + CTC_NR_EVENTS, + /* + * additional MPC events + */ + CTC_EVENT_SEND_XID = CTC_NR_EVENTS, + CTC_EVENT_RSWEEP_TIMER, + /* + * MUST be always the last element!! + */ + CTC_MPC_NR_EVENTS, +}; + +/* + * States of the channel statemachine(s) for ctc and ctcmpc. + */ +enum ctc_ch_states { + /* + * Channel not assigned to any device, + * initial state, direction invalid + */ + CTC_STATE_IDLE, + /* + * Channel assigned but not operating + */ + CTC_STATE_STOPPED, + CTC_STATE_STARTWAIT, + CTC_STATE_STARTRETRY, + CTC_STATE_SETUPWAIT, + CTC_STATE_RXINIT, + CTC_STATE_TXINIT, + CTC_STATE_RX, + CTC_STATE_TX, + CTC_STATE_RXIDLE, + CTC_STATE_TXIDLE, + CTC_STATE_RXERR, + CTC_STATE_TXERR, + CTC_STATE_TERM, + CTC_STATE_DTERM, + CTC_STATE_NOTOP, + CTC_NR_STATES, /* MUST be the last element of non-expanded states */ + /* + * additional MPC states + */ + CH_XID0_PENDING = CTC_NR_STATES, + CH_XID0_INPROGRESS, + CH_XID7_PENDING, + CH_XID7_PENDING1, + CH_XID7_PENDING2, + CH_XID7_PENDING3, + CH_XID7_PENDING4, + CTC_MPC_NR_STATES, /* MUST be the last element of expanded mpc states */ +}; + +extern const char *ctc_ch_event_names[]; + +extern const char *ctc_ch_state_names[]; + +void ctcm_ccw_check_rc(struct channel *ch, int rc, char *msg); +void ctcm_purge_skb_queue(struct sk_buff_head *q); +void fsm_action_nop(fsm_instance *fi, int event, void *arg); + +/* + * ----- non-static actions for ctcm channel statemachine ----- + * + */ +void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg); + +/* + * ----- FSM (state/event/action) of the ctcm channel statemachine ----- + */ +extern const fsm_node ch_fsm[]; +extern int ch_fsm_len; + + +/* + * ----- non-static actions for ctcmpc channel statemachine ---- + * + */ +/* shared : +void ctcm_chx_txidle(fsm_instance * fi, int event, void *arg); + */ +void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg); + +/* + * ----- FSM (state/event/action) of the ctcmpc channel statemachine ----- + */ +extern const fsm_node ctcmpc_ch_fsm[]; +extern int mpc_ch_fsm_len; + +/* + * Definitions for the device interface statemachine for ctc and mpc + */ + +/* + * States of the device interface statemachine. + */ +enum dev_states { + DEV_STATE_STOPPED, + DEV_STATE_STARTWAIT_RXTX, + DEV_STATE_STARTWAIT_RX, + DEV_STATE_STARTWAIT_TX, + DEV_STATE_STOPWAIT_RXTX, + DEV_STATE_STOPWAIT_RX, + DEV_STATE_STOPWAIT_TX, + DEV_STATE_RUNNING, + /* + * MUST be always the last element!! + */ + CTCM_NR_DEV_STATES +}; + +extern const char *dev_state_names[]; + +/* + * Events of the device interface statemachine. + * ctcm and ctcmpc + */ +enum dev_events { + DEV_EVENT_START, + DEV_EVENT_STOP, + DEV_EVENT_RXUP, + DEV_EVENT_TXUP, + DEV_EVENT_RXDOWN, + DEV_EVENT_TXDOWN, + DEV_EVENT_RESTART, + /* + * MUST be always the last element!! + */ + CTCM_NR_DEV_EVENTS +}; + +extern const char *dev_event_names[]; + +/* + * Actions for the device interface statemachine. + * ctc and ctcmpc + */ +/* +static void dev_action_start(fsm_instance * fi, int event, void *arg); +static void dev_action_stop(fsm_instance * fi, int event, void *arg); +static void dev_action_restart(fsm_instance *fi, int event, void *arg); +static void dev_action_chup(fsm_instance * fi, int event, void *arg); +static void dev_action_chdown(fsm_instance * fi, int event, void *arg); +*/ + +/* + * The (state/event/action) fsm table of the device interface statemachine. + * ctcm and ctcmpc + */ +extern const fsm_node dev_fsm[]; +extern int dev_fsm_len; + + +/* + * Definitions for the MPC Group statemachine + */ + +/* + * MPC Group Station FSM States + +State Name When In This State +====================== ======================================= +MPCG_STATE_RESET Initial State When Driver Loaded + We receive and send NOTHING + +MPCG_STATE_INOP INOP Received. + Group level non-recoverable error + +MPCG_STATE_READY XID exchanges for at least 1 write and + 1 read channel have completed. + Group is ready for data transfer. + +States from ctc_mpc_alloc_channel +============================================================== +MPCG_STATE_XID2INITW Awaiting XID2(0) Initiation + ATTN from other side will start + XID negotiations. + Y-side protocol only. + +MPCG_STATE_XID2INITX XID2(0) negotiations are in progress. + At least 1, but not all, XID2(0)'s + have been received from partner. + +MPCG_STATE_XID7INITW XID2(0) complete + No XID2(7)'s have yet been received. + XID2(7) negotiations pending. + +MPCG_STATE_XID7INITX XID2(7) negotiations in progress. + At least 1, but not all, XID2(7)'s + have been received from partner. + +MPCG_STATE_XID7INITF XID2(7) negotiations complete. + Transitioning to READY. + +MPCG_STATE_READY Ready for Data Transfer. + + +States from ctc_mpc_establish_connectivity call +============================================================== +MPCG_STATE_XID0IOWAIT Initiating XID2(0) negotiations. + X-side protocol only. + ATTN-BUSY from other side will convert + this to Y-side protocol and the + ctc_mpc_alloc_channel flow will begin. + +MPCG_STATE_XID0IOWAIX XID2(0) negotiations are in progress. + At least 1, but not all, XID2(0)'s + have been received from partner. + +MPCG_STATE_XID7INITI XID2(0) complete + No XID2(7)'s have yet been received. + XID2(7) negotiations pending. + +MPCG_STATE_XID7INITZ XID2(7) negotiations in progress. + At least 1, but not all, XID2(7)'s + have been received from partner. + +MPCG_STATE_XID7INITF XID2(7) negotiations complete. + Transitioning to READY. + +MPCG_STATE_READY Ready for Data Transfer. + +*/ + +enum mpcg_events { + MPCG_EVENT_INOP, + MPCG_EVENT_DISCONC, + MPCG_EVENT_XID0DO, + MPCG_EVENT_XID2, + MPCG_EVENT_XID2DONE, + MPCG_EVENT_XID7DONE, + MPCG_EVENT_TIMER, + MPCG_EVENT_DOIO, + MPCG_NR_EVENTS, +}; + +enum mpcg_states { + MPCG_STATE_RESET, + MPCG_STATE_INOP, + MPCG_STATE_XID2INITW, + MPCG_STATE_XID2INITX, + MPCG_STATE_XID7INITW, + MPCG_STATE_XID7INITX, + MPCG_STATE_XID0IOWAIT, + MPCG_STATE_XID0IOWAIX, + MPCG_STATE_XID7INITI, + MPCG_STATE_XID7INITZ, + MPCG_STATE_XID7INITF, + MPCG_STATE_FLOWC, + MPCG_STATE_READY, + MPCG_NR_STATES, +}; + +#endif +/* --- This is the END my friend --- */ diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c new file mode 100644 index 0000000..d52843d --- /dev/null +++ b/drivers/s390/net/ctcm_main.c @@ -0,0 +1,1772 @@ +/* + * drivers/s390/net/ctcm_main.c + * + * Copyright IBM Corp. 2001, 2007 + * Author(s): + * Original CTC driver(s): + * Fritz Elfert (felfert@millenux.com) + * Dieter Wellerdiek (wel@de.ibm.com) + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * Denis Joseph Barrow (barrow_dj@yahoo.com) + * Jochen Roehrig (roehrig@de.ibm.com) + * Cornelia Huck + * MPC additions: + * Belinda Thompson (belindat@us.ibm.com) + * Andy Richter (richtera@us.ibm.com) + * Revived by: + * Peter Tiedemann (ptiedem@de.ibm.com) + */ + +#undef DEBUG +#undef DEBUGDATA +#undef DEBUGCCW + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "cu3088.h" +#include "ctcm_fsms.h" +#include "ctcm_main.h" + +/* Some common global variables */ + +/* + * Linked list of all detected channels. + */ +struct channel *channels; + +/** + * Unpack a just received skb and hand it over to + * upper layers. + * + * ch The channel where this skb has been received. + * pskb The received skb. + */ +void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb) +{ + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + __u16 len = *((__u16 *) pskb->data); + + skb_put(pskb, 2 + LL_HEADER_LENGTH); + skb_pull(pskb, 2); + pskb->dev = dev; + pskb->ip_summed = CHECKSUM_UNNECESSARY; + while (len > 0) { + struct sk_buff *skb; + int skblen; + struct ll_header *header = (struct ll_header *)pskb->data; + + skb_pull(pskb, LL_HEADER_LENGTH); + if ((ch->protocol == CTCM_PROTO_S390) && + (header->type != ETH_P_IP)) { + + if (!(ch->logflags & LOG_FLAG_ILLEGALPKT)) { + /* + * Check packet type only if we stick strictly + * to S/390's protocol of OS390. This only + * supports IP. Otherwise allow any packet + * type. + */ + ctcm_pr_warn("%s Illegal packet type 0x%04x " + "received, dropping\n", + dev->name, header->type); + ch->logflags |= LOG_FLAG_ILLEGALPKT; + } + + priv->stats.rx_dropped++; + priv->stats.rx_frame_errors++; + return; + } + pskb->protocol = ntohs(header->type); + if (header->length <= LL_HEADER_LENGTH) { + if (!(ch->logflags & LOG_FLAG_ILLEGALSIZE)) { + ctcm_pr_warn( + "%s Illegal packet size %d " + "received (MTU=%d blocklen=%d), " + "dropping\n", dev->name, header->length, + dev->mtu, len); + ch->logflags |= LOG_FLAG_ILLEGALSIZE; + } + + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + return; + } + header->length -= LL_HEADER_LENGTH; + len -= LL_HEADER_LENGTH; + if ((header->length > skb_tailroom(pskb)) || + (header->length > len)) { + if (!(ch->logflags & LOG_FLAG_OVERRUN)) { + ctcm_pr_warn( + "%s Illegal packet size %d (beyond the" + " end of received data), dropping\n", + dev->name, header->length); + ch->logflags |= LOG_FLAG_OVERRUN; + } + + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + return; + } + skb_put(pskb, header->length); + skb_reset_mac_header(pskb); + len -= header->length; + skb = dev_alloc_skb(pskb->len); + if (!skb) { + if (!(ch->logflags & LOG_FLAG_NOMEM)) { + ctcm_pr_warn( + "%s Out of memory in ctcm_unpack_skb\n", + dev->name); + ch->logflags |= LOG_FLAG_NOMEM; + } + priv->stats.rx_dropped++; + return; + } + skb_copy_from_linear_data(pskb, skb_put(skb, pskb->len), + pskb->len); + skb_reset_mac_header(skb); + skb->dev = pskb->dev; + skb->protocol = pskb->protocol; + pskb->ip_summed = CHECKSUM_UNNECESSARY; + skblen = skb->len; + /* + * reset logflags + */ + ch->logflags = 0; + priv->stats.rx_packets++; + priv->stats.rx_bytes += skblen; + netif_rx_ni(skb); + dev->last_rx = jiffies; + if (len > 0) { + skb_pull(pskb, header->length); + if (skb_tailroom(pskb) < LL_HEADER_LENGTH) { + if (!(ch->logflags & LOG_FLAG_OVERRUN)) { + CTCM_DBF_DEV_NAME(TRACE, dev, + "Overrun in ctcm_unpack_skb"); + ch->logflags |= LOG_FLAG_OVERRUN; + } + return; + } + skb_put(pskb, LL_HEADER_LENGTH); + } + } +} + +/** + * Release a specific channel in the channel list. + * + * ch Pointer to channel struct to be released. + */ +static void channel_free(struct channel *ch) +{ + CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__); + ch->flags &= ~CHANNEL_FLAGS_INUSE; + fsm_newstate(ch->fsm, CTC_STATE_IDLE); +} + +/** + * Remove a specific channel in the channel list. + * + * ch Pointer to channel struct to be released. + */ +static void channel_remove(struct channel *ch) +{ + struct channel **c = &channels; + char chid[CTCM_ID_SIZE+1]; + int ok = 0; + + if (ch == NULL) + return; + else + strncpy(chid, ch->id, CTCM_ID_SIZE); + + channel_free(ch); + while (*c) { + if (*c == ch) { + *c = ch->next; + fsm_deltimer(&ch->timer); + if (IS_MPC(ch)) + fsm_deltimer(&ch->sweep_timer); + + kfree_fsm(ch->fsm); + clear_normalized_cda(&ch->ccw[4]); + if (ch->trans_skb != NULL) { + clear_normalized_cda(&ch->ccw[1]); + dev_kfree_skb_any(ch->trans_skb); + } + if (IS_MPC(ch)) { + tasklet_kill(&ch->ch_tasklet); + tasklet_kill(&ch->ch_disc_tasklet); + kfree(ch->discontact_th); + } + kfree(ch->ccw); + kfree(ch->irb); + kfree(ch); + ok = 1; + break; + } + c = &((*c)->next); + } + + CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s) %s", CTCM_FUNTAIL, + chid, ok ? "OK" : "failed"); +} + +/** + * Get a specific channel from the channel list. + * + * type Type of channel we are interested in. + * id Id of channel we are interested in. + * direction Direction we want to use this channel for. + * + * returns Pointer to a channel or NULL if no matching channel available. + */ +static struct channel *channel_get(enum channel_types type, + char *id, int direction) +{ + struct channel *ch = channels; + + if (do_debug) { + char buf[64]; + sprintf(buf, "%s(%d, %s, %d)\n", + CTCM_FUNTAIL, type, id, direction); + CTCM_DBF_TEXT(TRACE, CTC_DBF_INFO, buf); + } + while (ch && (strncmp(ch->id, id, CTCM_ID_SIZE) || (ch->type != type))) + ch = ch->next; + if (!ch) { + char buf[64]; + sprintf(buf, "%s(%d, %s, %d) not found in channel list\n", + CTCM_FUNTAIL, type, id, direction); + CTCM_DBF_TEXT(ERROR, CTC_DBF_ERROR, buf); + } else { + if (ch->flags & CHANNEL_FLAGS_INUSE) + ch = NULL; + else { + ch->flags |= CHANNEL_FLAGS_INUSE; + ch->flags &= ~CHANNEL_FLAGS_RWMASK; + ch->flags |= (direction == WRITE) + ? CHANNEL_FLAGS_WRITE : CHANNEL_FLAGS_READ; + fsm_newstate(ch->fsm, CTC_STATE_STOPPED); + } + } + return ch; +} + +static long ctcm_check_irb_error(struct ccw_device *cdev, struct irb *irb) +{ + if (!IS_ERR(irb)) + return 0; + + CTCM_DBF_TEXT_(ERROR, CTC_DBF_WARN, "irb error %ld on device %s\n", + PTR_ERR(irb), cdev->dev.bus_id); + + switch (PTR_ERR(irb)) { + case -EIO: + ctcm_pr_warn("i/o-error on device %s\n", cdev->dev.bus_id); + break; + case -ETIMEDOUT: + ctcm_pr_warn("timeout on device %s\n", cdev->dev.bus_id); + break; + default: + ctcm_pr_warn("unknown error %ld on device %s\n", + PTR_ERR(irb), cdev->dev.bus_id); + } + return PTR_ERR(irb); +} + + +/** + * Check sense of a unit check. + * + * ch The channel, the sense code belongs to. + * sense The sense code to inspect. + */ +static inline void ccw_unit_check(struct channel *ch, unsigned char sense) +{ + CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__); + if (sense & SNS0_INTERVENTION_REQ) { + if (sense & 0x01) { + ctcm_pr_debug("%s: Interface disc. or Sel. reset " + "(remote)\n", ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_RCRESET, ch); + } else { + ctcm_pr_debug("%s: System reset (remote)\n", ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_RSRESET, ch); + } + } else if (sense & SNS0_EQUIPMENT_CHECK) { + if (sense & SNS0_BUS_OUT_CHECK) { + ctcm_pr_warn("%s: Hardware malfunction (remote)\n", + ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_HWFAIL, ch); + } else { + ctcm_pr_warn("%s: Read-data parity error (remote)\n", + ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_RXPARITY, ch); + } + } else if (sense & SNS0_BUS_OUT_CHECK) { + if (sense & 0x04) { + ctcm_pr_warn("%s: Data-streaming timeout)\n", ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_TXTIMEOUT, ch); + } else { + ctcm_pr_warn("%s: Data-transfer parity error\n", + ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_TXPARITY, ch); + } + } else if (sense & SNS0_CMD_REJECT) { + ctcm_pr_warn("%s: Command reject\n", ch->id); + } else if (sense == 0) { + ctcm_pr_debug("%s: Unit check ZERO\n", ch->id); + fsm_event(ch->fsm, CTC_EVENT_UC_ZERO, ch); + } else { + ctcm_pr_warn("%s: Unit Check with sense code: %02x\n", + ch->id, sense); + fsm_event(ch->fsm, CTC_EVENT_UC_UNKNOWN, ch); + } +} + +int ctcm_ch_alloc_buffer(struct channel *ch) +{ + CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__); + + clear_normalized_cda(&ch->ccw[1]); + ch->trans_skb = __dev_alloc_skb(ch->max_bufsize, GFP_ATOMIC | GFP_DMA); + if (ch->trans_skb == NULL) { + ctcm_pr_warn("%s: Couldn't alloc %s trans_skb\n", + ch->id, + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); + return -ENOMEM; + } + + ch->ccw[1].count = ch->max_bufsize; + if (set_normalized_cda(&ch->ccw[1], ch->trans_skb->data)) { + dev_kfree_skb(ch->trans_skb); + ch->trans_skb = NULL; + ctcm_pr_warn("%s: set_normalized_cda for %s " + "trans_skb failed, dropping packets\n", + ch->id, + (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); + return -ENOMEM; + } + + ch->ccw[1].count = 0; + ch->trans_skb_data = ch->trans_skb->data; + ch->flags &= ~CHANNEL_FLAGS_BUFSIZE_CHANGED; + return 0; +} + +/* + * Interface API for upper network layers + */ + +/** + * Open an interface. + * Called from generic network layer when ifconfig up is run. + * + * dev Pointer to interface struct. + * + * returns 0 on success, -ERRNO on failure. (Never fails.) + */ +int ctcm_open(struct net_device *dev) +{ + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + if (!IS_MPC(priv)) + fsm_event(priv->fsm, DEV_EVENT_START, dev); + return 0; +} + +/** + * Close an interface. + * Called from generic network layer when ifconfig down is run. + * + * dev Pointer to interface struct. + * + * returns 0 on success, -ERRNO on failure. (Never fails.) + */ +int ctcm_close(struct net_device *dev) +{ + struct ctcm_priv *priv = dev->priv; + + CTCMY_DBF_DEV_NAME(SETUP, dev, ""); + if (!IS_MPC(priv)) + fsm_event(priv->fsm, DEV_EVENT_STOP, dev); + return 0; +} + + +/** + * Transmit a packet. + * This is a helper function for ctcm_tx(). + * + * ch Channel to be used for sending. + * skb Pointer to struct sk_buff of packet to send. + * The linklevel header has already been set up + * by ctcm_tx(). + * + * returns 0 on success, -ERRNO on failure. (Never fails.) + */ +static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb) +{ + unsigned long saveflags; + struct ll_header header; + int rc = 0; + __u16 block_len; + int ccw_idx; + struct sk_buff *nskb; + unsigned long hi; + + /* we need to acquire the lock for testing the state + * otherwise we can have an IRQ changing the state to + * TXIDLE after the test but before acquiring the lock. + */ + spin_lock_irqsave(&ch->collect_lock, saveflags); + if (fsm_getstate(ch->fsm) != CTC_STATE_TXIDLE) { + int l = skb->len + LL_HEADER_LENGTH; + + if (ch->collect_len + l > ch->max_bufsize - 2) { + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + return -EBUSY; + } else { + atomic_inc(&skb->users); + header.length = l; + header.type = skb->protocol; + header.unused = 0; + memcpy(skb_push(skb, LL_HEADER_LENGTH), &header, + LL_HEADER_LENGTH); + skb_queue_tail(&ch->collect_queue, skb); + ch->collect_len += l; + } + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + goto done; + } + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + /* + * Protect skb against beeing free'd by upper + * layers. + */ + atomic_inc(&skb->users); + ch->prof.txlen += skb->len; + header.length = skb->len + LL_HEADER_LENGTH; + header.type = skb->protocol; + header.unused = 0; + memcpy(skb_push(skb, LL_HEADER_LENGTH), &header, LL_HEADER_LENGTH); + block_len = skb->len + 2; + *((__u16 *)skb_push(skb, 2)) = block_len; + + /* + * IDAL support in CTCM is broken, so we have to + * care about skb's above 2G ourselves. + */ + hi = ((unsigned long)skb_tail_pointer(skb) + LL_HEADER_LENGTH) >> 31; + if (hi) { + nskb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); + if (!nskb) { + atomic_dec(&skb->users); + skb_pull(skb, LL_HEADER_LENGTH + 2); + ctcm_clear_busy(ch->netdev); + return -ENOMEM; + } else { + memcpy(skb_put(nskb, skb->len), skb->data, skb->len); + atomic_inc(&nskb->users); + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + skb = nskb; + } + } + + ch->ccw[4].count = block_len; + if (set_normalized_cda(&ch->ccw[4], skb->data)) { + /* + * idal allocation failed, try via copying to + * trans_skb. trans_skb usually has a pre-allocated + * idal. + */ + if (ctcm_checkalloc_buffer(ch)) { + /* + * Remove our header. It gets added + * again on retransmit. + */ + atomic_dec(&skb->users); + skb_pull(skb, LL_HEADER_LENGTH + 2); + ctcm_clear_busy(ch->netdev); + return -EBUSY; + } + + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + ch->ccw[1].count = skb->len; + skb_copy_from_linear_data(skb, + skb_put(ch->trans_skb, skb->len), skb->len); + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + ccw_idx = 0; + } else { + skb_queue_tail(&ch->io_queue, skb); + ccw_idx = 3; + } + ch->retry = 0; + fsm_newstate(ch->fsm, CTC_STATE_TX); + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + ch->prof.send_stamp = current_kernel_time(); /* xtime */ + rc = ccw_device_start(ch->cdev, &ch->ccw[ccw_idx], + (unsigned long)ch, 0xff, 0); + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + if (ccw_idx == 3) + ch->prof.doios_single++; + if (rc != 0) { + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "single skb TX"); + if (ccw_idx == 3) + skb_dequeue_tail(&ch->io_queue); + /* + * Remove our header. It gets added + * again on retransmit. + */ + skb_pull(skb, LL_HEADER_LENGTH + 2); + } else if (ccw_idx == 0) { + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; + } +done: + ctcm_clear_busy(ch->netdev); + return rc; +} + +static void ctcmpc_send_sweep_req(struct channel *rch) +{ + struct net_device *dev = rch->netdev; + struct ctcm_priv *priv; + struct mpc_group *grp; + struct th_sweep *header; + struct sk_buff *sweep_skb; + struct channel *ch; + int rc = 0; + + priv = dev->priv; + grp = priv->mpcg; + ch = priv->channel[WRITE]; + + if (do_debug) + MPC_DBF_DEV_NAME(TRACE, dev, ch->id); + + /* sweep processing is not complete until response and request */ + /* has completed for all read channels in group */ + if (grp->in_sweep == 0) { + grp->in_sweep = 1; + grp->sweep_rsp_pend_num = grp->active_channels[READ]; + grp->sweep_req_pend_num = grp->active_channels[READ]; + } + + sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC|GFP_DMA); + + if (sweep_skb == NULL) { + printk(KERN_INFO "Couldn't alloc sweep_skb\n"); + rc = -ENOMEM; + goto done; + } + + header = kmalloc(TH_SWEEP_LENGTH, gfp_type()); + + if (!header) { + dev_kfree_skb_any(sweep_skb); + rc = -ENOMEM; + goto done; + } + + header->th.th_seg = 0x00 ; + header->th.th_ch_flag = TH_SWEEP_REQ; /* 0x0f */ + header->th.th_blk_flag = 0x00; + header->th.th_is_xid = 0x00; + header->th.th_seq_num = 0x00; + header->sw.th_last_seq = ch->th_seq_num; + + memcpy(skb_put(sweep_skb, TH_SWEEP_LENGTH), header, TH_SWEEP_LENGTH); + + kfree(header); + + dev->trans_start = jiffies; + skb_queue_tail(&ch->sweep_queue, sweep_skb); + + fsm_addtimer(&ch->sweep_timer, 100, CTC_EVENT_RSWEEP_TIMER, ch); + + return; + +done: + if (rc != 0) { + grp->in_sweep = 0; + ctcm_clear_busy(dev); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + } + + return; +} + +/* + * MPC mode version of transmit_skb + */ +static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb) +{ + struct pdu *p_header; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct th_header *header; + struct sk_buff *nskb; + int rc = 0; + int ccw_idx; + unsigned long hi; + unsigned long saveflags = 0; /* avoids compiler warning */ + __u16 block_len; + + if (do_debug) + ctcm_pr_debug( + "ctcm enter: %s(): %s cp=%i ch=0x%p id=%s state=%s\n", + __FUNCTION__, dev->name, smp_processor_id(), ch, + ch->id, fsm_getstate_str(ch->fsm)); + + if ((fsm_getstate(ch->fsm) != CTC_STATE_TXIDLE) || grp->in_sweep) { + spin_lock_irqsave(&ch->collect_lock, saveflags); + atomic_inc(&skb->users); + p_header = kmalloc(PDU_HEADER_LENGTH, gfp_type()); + + if (!p_header) { + printk(KERN_WARNING "ctcm: OUT OF MEMORY IN %s():" + " Data Lost \n", __FUNCTION__); + + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + p_header->pdu_offset = skb->len; + p_header->pdu_proto = 0x01; + p_header->pdu_flag = 0x00; + if (skb->protocol == ntohs(ETH_P_SNAP)) { + p_header->pdu_flag |= PDU_FIRST | PDU_CNTL; + } else { + p_header->pdu_flag |= PDU_FIRST; + } + p_header->pdu_seq = 0; + memcpy(skb_push(skb, PDU_HEADER_LENGTH), p_header, + PDU_HEADER_LENGTH); + + if (do_debug_data) { + ctcm_pr_debug("ctcm: %s() Putting on collect_q" + " - skb len: %04x \n", __FUNCTION__, skb->len); + ctcm_pr_debug("ctcm: %s() pdu header and data" + " for up to 32 bytes\n", __FUNCTION__); + ctcmpc_dump32((char *)skb->data, skb->len); + } + + skb_queue_tail(&ch->collect_queue, skb); + ch->collect_len += skb->len; + kfree(p_header); + + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + goto done; + } + + /* + * Protect skb against beeing free'd by upper + * layers. + */ + atomic_inc(&skb->users); + + block_len = skb->len + TH_HEADER_LENGTH + PDU_HEADER_LENGTH; + /* + * IDAL support in CTCM is broken, so we have to + * care about skb's above 2G ourselves. + */ + hi = ((unsigned long)skb->tail + TH_HEADER_LENGTH) >> 31; + if (hi) { + nskb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); + if (!nskb) { + printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY" + "- Data Lost \n", __FUNCTION__); + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } else { + memcpy(skb_put(nskb, skb->len), skb->data, skb->len); + atomic_inc(&nskb->users); + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + skb = nskb; + } + } + + p_header = kmalloc(PDU_HEADER_LENGTH, gfp_type()); + + if (!p_header) { + printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY" + ": Data Lost \n", __FUNCTION__); + + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + p_header->pdu_offset = skb->len; + p_header->pdu_proto = 0x01; + p_header->pdu_flag = 0x00; + p_header->pdu_seq = 0; + if (skb->protocol == ntohs(ETH_P_SNAP)) { + p_header->pdu_flag |= PDU_FIRST | PDU_CNTL; + } else { + p_header->pdu_flag |= PDU_FIRST; + } + memcpy(skb_push(skb, PDU_HEADER_LENGTH), p_header, PDU_HEADER_LENGTH); + + kfree(p_header); + + if (ch->collect_len > 0) { + spin_lock_irqsave(&ch->collect_lock, saveflags); + skb_queue_tail(&ch->collect_queue, skb); + ch->collect_len += skb->len; + skb = skb_dequeue(&ch->collect_queue); + ch->collect_len -= skb->len; + spin_unlock_irqrestore(&ch->collect_lock, saveflags); + } + + p_header = (struct pdu *)skb->data; + p_header->pdu_flag |= PDU_LAST; + + ch->prof.txlen += skb->len - PDU_HEADER_LENGTH; + + header = kmalloc(TH_HEADER_LENGTH, gfp_type()); + + if (!header) { + printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY: Data Lost \n", + __FUNCTION__); + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + header->th_seg = 0x00; + header->th_ch_flag = TH_HAS_PDU; /* Normal data */ + header->th_blk_flag = 0x00; + header->th_is_xid = 0x00; /* Just data here */ + ch->th_seq_num++; + header->th_seq_num = ch->th_seq_num; + + if (do_debug_data) + ctcm_pr_debug("ctcm: %s() ToVTAM_th_seq= %08x\n" , + __FUNCTION__, ch->th_seq_num); + + /* put the TH on the packet */ + memcpy(skb_push(skb, TH_HEADER_LENGTH), header, TH_HEADER_LENGTH); + + kfree(header); + + if (do_debug_data) { + ctcm_pr_debug("ctcm: %s(): skb len: %04x \n", + __FUNCTION__, skb->len); + ctcm_pr_debug("ctcm: %s(): pdu header and data for up to 32 " + "bytes sent to vtam\n", __FUNCTION__); + ctcmpc_dump32((char *)skb->data, skb->len); + } + + ch->ccw[4].count = skb->len; + if (set_normalized_cda(&ch->ccw[4], skb->data)) { + /* + * idal allocation failed, try via copying to + * trans_skb. trans_skb usually has a pre-allocated + * idal. + */ + if (ctcm_checkalloc_buffer(ch)) { + /* + * Remove our header. It gets added + * again on retransmit. + */ + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + printk(KERN_WARNING "ctcm: %s()OUT OF MEMORY:" + " Data Lost \n", __FUNCTION__); + fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + ch->ccw[1].count = skb->len; + memcpy(skb_put(ch->trans_skb, skb->len), skb->data, skb->len); + atomic_dec(&skb->users); + dev_kfree_skb_irq(skb); + ccw_idx = 0; + if (do_debug_data) { + ctcm_pr_debug("ctcm: %s() TRANS skb len: %d \n", + __FUNCTION__, ch->trans_skb->len); + ctcm_pr_debug("ctcm: %s up to 32 bytes of data" + " sent to vtam\n", __FUNCTION__); + ctcmpc_dump32((char *)ch->trans_skb->data, + ch->trans_skb->len); + } + } else { + skb_queue_tail(&ch->io_queue, skb); + ccw_idx = 3; + } + ch->retry = 0; + fsm_newstate(ch->fsm, CTC_STATE_TX); + fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch); + + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[ccw_idx], + sizeof(struct ccw1) * 3); + + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + ch->prof.send_stamp = current_kernel_time(); /* xtime */ + rc = ccw_device_start(ch->cdev, &ch->ccw[ccw_idx], + (unsigned long)ch, 0xff, 0); + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + if (ccw_idx == 3) + ch->prof.doios_single++; + if (rc != 0) { + fsm_deltimer(&ch->timer); + ctcm_ccw_check_rc(ch, rc, "single skb TX"); + if (ccw_idx == 3) + skb_dequeue_tail(&ch->io_queue); + } else if (ccw_idx == 0) { + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len - TH_HEADER_LENGTH; + } + if (ch->th_seq_num > 0xf0000000) /* Chose 4Billion at random. */ + ctcmpc_send_sweep_req(ch); + +done: + if (do_debug) + ctcm_pr_debug("ctcm exit: %s %s()\n", dev->name, __FUNCTION__); + return 0; +} + +/** + * Start transmission of a packet. + * Called from generic network device layer. + * + * skb Pointer to buffer containing the packet. + * dev Pointer to interface struct. + * + * returns 0 if packet consumed, !0 if packet rejected. + * Note: If we return !0, then the packet is free'd by + * the generic network layer. + */ +/* first merge version - leaving both functions separated */ +static int ctcm_tx(struct sk_buff *skb, struct net_device *dev) +{ + int rc = 0; + struct ctcm_priv *priv; + + CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__); + priv = dev->priv; + + if (skb == NULL) { + ctcm_pr_warn("%s: NULL sk_buff passed\n", dev->name); + priv->stats.tx_dropped++; + return 0; + } + if (skb_headroom(skb) < (LL_HEADER_LENGTH + 2)) { + ctcm_pr_warn("%s: Got sk_buff with head room < %ld bytes\n", + dev->name, LL_HEADER_LENGTH + 2); + dev_kfree_skb(skb); + priv->stats.tx_dropped++; + return 0; + } + + /* + * If channels are not running, try to restart them + * and throw away packet. + */ + if (fsm_getstate(priv->fsm) != DEV_STATE_RUNNING) { + fsm_event(priv->fsm, DEV_EVENT_START, dev); + dev_kfree_skb(skb); + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + priv->stats.tx_carrier_errors++; + return 0; + } + + if (ctcm_test_and_set_busy(dev)) + return -EBUSY; + + dev->trans_start = jiffies; + if (ctcm_transmit_skb(priv->channel[WRITE], skb) != 0) + rc = 1; + return rc; +} + +/* unmerged MPC variant of ctcm_tx */ +static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev) +{ + int len = 0; + struct ctcm_priv *priv = NULL; + struct mpc_group *grp = NULL; + struct sk_buff *newskb = NULL; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): skb:%0lx\n", + __FUNCTION__, (unsigned long)skb); + + CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG, + "ctcmpc enter: %s(): skb:%0lx\n", + __FUNCTION__, (unsigned long)skb); + + priv = dev->priv; + grp = priv->mpcg; + /* + * Some sanity checks ... + */ + if (skb == NULL) { + ctcm_pr_warn("ctcmpc: %s: NULL sk_buff passed\n", dev->name); + priv->stats.tx_dropped++; + goto done; + } + if (skb_headroom(skb) < (TH_HEADER_LENGTH + PDU_HEADER_LENGTH)) { + CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_WARN, + "%s: Got sk_buff with head room < %ld bytes\n", + dev->name, TH_HEADER_LENGTH + PDU_HEADER_LENGTH); + + if (do_debug_data) + ctcmpc_dump32((char *)skb->data, skb->len); + + len = skb->len + TH_HEADER_LENGTH + PDU_HEADER_LENGTH; + newskb = __dev_alloc_skb(len, gfp_type() | GFP_DMA); + + if (!newskb) { + printk(KERN_WARNING "ctcmpc: %s() OUT OF MEMORY-" + "Data Lost\n", + __FUNCTION__); + + dev_kfree_skb_any(skb); + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + priv->stats.tx_carrier_errors++; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + newskb->protocol = skb->protocol; + skb_reserve(newskb, TH_HEADER_LENGTH + PDU_HEADER_LENGTH); + memcpy(skb_put(newskb, skb->len), skb->data, skb->len); + dev_kfree_skb_any(skb); + skb = newskb; + } + + /* + * If channels are not running, + * notify anybody about a link failure and throw + * away packet. + */ + if ((fsm_getstate(priv->fsm) != DEV_STATE_RUNNING) || + (fsm_getstate(grp->fsm) < MPCG_STATE_XID2INITW)) { + dev_kfree_skb_any(skb); + printk(KERN_INFO "ctcmpc: %s() DATA RCVD - MPC GROUP " + "NOT ACTIVE - DROPPED\n", + __FUNCTION__); + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + priv->stats.tx_carrier_errors++; + goto done; + } + + if (ctcm_test_and_set_busy(dev)) { + printk(KERN_WARNING "%s:DEVICE ERR - UNRECOVERABLE DATA LOSS\n", + __FUNCTION__); + dev_kfree_skb_any(skb); + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + priv->stats.tx_carrier_errors++; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + + dev->trans_start = jiffies; + if (ctcmpc_transmit_skb(priv->channel[WRITE], skb) != 0) { + printk(KERN_WARNING "ctcmpc: %s() DEVICE ERROR" + ": Data Lost \n", + __FUNCTION__); + printk(KERN_WARNING "ctcmpc: %s() DEVICE ERROR" + " - UNRECOVERABLE DATA LOSS\n", + __FUNCTION__); + dev_kfree_skb_any(skb); + priv->stats.tx_dropped++; + priv->stats.tx_errors++; + priv->stats.tx_carrier_errors++; + ctcm_clear_busy(dev); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + goto done; + } + ctcm_clear_busy(dev); +done: + if (do_debug) + MPC_DBF_DEV_NAME(TRACE, dev, "exit"); + + return 0; /* handle freeing of skb here */ +} + + +/** + * Sets MTU of an interface. + * + * dev Pointer to interface struct. + * new_mtu The new MTU to use for this interface. + * + * returns 0 on success, -EINVAL if MTU is out of valid range. + * (valid range is 576 .. 65527). If VM is on the + * remote side, maximum MTU is 32760, however this is + * not checked here. + */ +static int ctcm_change_mtu(struct net_device *dev, int new_mtu) +{ + struct ctcm_priv *priv; + int max_bufsize; + + CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__); + + if (new_mtu < 576 || new_mtu > 65527) + return -EINVAL; + + priv = dev->priv; + max_bufsize = priv->channel[READ]->max_bufsize; + + if (IS_MPC(priv)) { + if (new_mtu > max_bufsize - TH_HEADER_LENGTH) + return -EINVAL; + dev->hard_header_len = TH_HEADER_LENGTH + PDU_HEADER_LENGTH; + } else { + if (new_mtu > max_bufsize - LL_HEADER_LENGTH - 2) + return -EINVAL; + dev->hard_header_len = LL_HEADER_LENGTH + 2; + } + dev->mtu = new_mtu; + return 0; +} + +/** + * Returns interface statistics of a device. + * + * dev Pointer to interface struct. + * + * returns Pointer to stats struct of this interface. + */ +static struct net_device_stats *ctcm_stats(struct net_device *dev) +{ + return &((struct ctcm_priv *)dev->priv)->stats; +} + + +static void ctcm_netdev_unregister(struct net_device *dev) +{ + CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__); + if (!dev) + return; + unregister_netdev(dev); +} + +static int ctcm_netdev_register(struct net_device *dev) +{ + CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__); + return register_netdev(dev); +} + +static void ctcm_free_netdevice(struct net_device *dev) +{ + struct ctcm_priv *priv; + struct mpc_group *grp; + + CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__); + + if (!dev) + return; + priv = dev->priv; + if (priv) { + grp = priv->mpcg; + if (grp) { + if (grp->fsm) + kfree_fsm(grp->fsm); + if (grp->xid_skb) + dev_kfree_skb(grp->xid_skb); + if (grp->rcvd_xid_skb) + dev_kfree_skb(grp->rcvd_xid_skb); + tasklet_kill(&grp->mpc_tasklet2); + kfree(grp); + priv->mpcg = NULL; + } + if (priv->fsm) { + kfree_fsm(priv->fsm); + priv->fsm = NULL; + } + kfree(priv->xid); + priv->xid = NULL; + /* + * Note: kfree(priv); is done in "opposite" function of + * allocator function probe_device which is remove_device. + */ + } +#ifdef MODULE + free_netdev(dev); +#endif +} + +struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv); + +void static ctcm_dev_setup(struct net_device *dev) +{ + dev->open = ctcm_open; + dev->stop = ctcm_close; + dev->get_stats = ctcm_stats; + dev->change_mtu = ctcm_change_mtu; + dev->type = ARPHRD_SLIP; + dev->tx_queue_len = 100; + dev->flags = IFF_POINTOPOINT | IFF_NOARP; +} + +/* + * Initialize everything of the net device except the name and the + * channel structs. + */ +static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) +{ + struct net_device *dev; + struct mpc_group *grp; + if (!priv) + return NULL; + + if (IS_MPC(priv)) + dev = alloc_netdev(0, MPC_DEVICE_GENE, ctcm_dev_setup); + else + dev = alloc_netdev(0, CTC_DEVICE_GENE, ctcm_dev_setup); + + if (!dev) { + ctcm_pr_err("%s: Out of memory\n", __FUNCTION__); + return NULL; + } + dev->priv = priv; + priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names, + CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS, + dev_fsm, dev_fsm_len, GFP_KERNEL); + if (priv->fsm == NULL) { + CTCMY_DBF_DEV(SETUP, dev, "init_fsm error"); + kfree(dev); + return NULL; + } + fsm_newstate(priv->fsm, DEV_STATE_STOPPED); + fsm_settimer(priv->fsm, &priv->restart_timer); + + if (IS_MPC(priv)) { + /* MPC Group Initializations */ + grp = ctcmpc_init_mpc_group(priv); + if (grp == NULL) { + MPC_DBF_DEV(SETUP, dev, "init_mpc_group error"); + kfree(dev); + return NULL; + } + tasklet_init(&grp->mpc_tasklet2, + mpc_group_ready, (unsigned long)dev); + dev->mtu = MPC_BUFSIZE_DEFAULT - + TH_HEADER_LENGTH - PDU_HEADER_LENGTH; + + dev->hard_start_xmit = ctcmpc_tx; + dev->hard_header_len = TH_HEADER_LENGTH + PDU_HEADER_LENGTH; + priv->buffer_size = MPC_BUFSIZE_DEFAULT; + } else { + dev->mtu = CTCM_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2; + dev->hard_start_xmit = ctcm_tx; + dev->hard_header_len = LL_HEADER_LENGTH + 2; + } + + CTCMY_DBF_DEV(SETUP, dev, "finished"); + return dev; +} + +/** + * Main IRQ handler. + * + * cdev The ccw_device the interrupt is for. + * intparm interruption parameter. + * irb interruption response block. + */ +static void ctcm_irq_handler(struct ccw_device *cdev, + unsigned long intparm, struct irb *irb) +{ + struct channel *ch; + struct net_device *dev; + struct ctcm_priv *priv; + struct ccwgroup_device *cgdev; + + CTCM_DBF_TEXT(TRACE, CTC_DBF_DEBUG, __FUNCTION__); + if (ctcm_check_irb_error(cdev, irb)) + return; + + cgdev = dev_get_drvdata(&cdev->dev); + + /* Check for unsolicited interrupts. */ + if (cgdev == NULL) { + ctcm_pr_warn("ctcm: Got unsolicited irq: %s c-%02x d-%02x\n", + cdev->dev.bus_id, irb->scsw.cstat, + irb->scsw.dstat); + return; + } + + priv = dev_get_drvdata(&cgdev->dev); + + /* Try to extract channel from driver data. */ + if (priv->channel[READ]->cdev == cdev) + ch = priv->channel[READ]; + else if (priv->channel[WRITE]->cdev == cdev) + ch = priv->channel[WRITE]; + else { + ctcm_pr_err("ctcm: Can't determine channel for interrupt, " + "device %s\n", cdev->dev.bus_id); + return; + } + + dev = (struct net_device *)(ch->netdev); + if (dev == NULL) { + ctcm_pr_crit("ctcm: %s dev=NULL bus_id=%s, ch=0x%p\n", + __FUNCTION__, cdev->dev.bus_id, ch); + return; + } + + if (do_debug) + ctcm_pr_debug("%s: interrupt for device: %s " + "received c-%02x d-%02x\n", + dev->name, + ch->id, + irb->scsw.cstat, + irb->scsw.dstat); + + /* Copy interruption response block. */ + memcpy(ch->irb, irb, sizeof(struct irb)); + + /* Check for good subchannel return code, otherwise error message */ + if (irb->scsw.cstat) { + fsm_event(ch->fsm, CTC_EVENT_SC_UNKNOWN, ch); + ctcm_pr_warn("%s: subchannel check for dev: %s - %02x %02x\n", + dev->name, ch->id, irb->scsw.cstat, + irb->scsw.dstat); + return; + } + + /* Check the reason-code of a unit check */ + if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK) { + ccw_unit_check(ch, irb->ecw[0]); + return; + } + if (irb->scsw.dstat & DEV_STAT_BUSY) { + if (irb->scsw.dstat & DEV_STAT_ATTENTION) + fsm_event(ch->fsm, CTC_EVENT_ATTNBUSY, ch); + else + fsm_event(ch->fsm, CTC_EVENT_BUSY, ch); + return; + } + if (irb->scsw.dstat & DEV_STAT_ATTENTION) { + fsm_event(ch->fsm, CTC_EVENT_ATTN, ch); + return; + } + if ((irb->scsw.stctl & SCSW_STCTL_SEC_STATUS) || + (irb->scsw.stctl == SCSW_STCTL_STATUS_PEND) || + (irb->scsw.stctl == + (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND))) + fsm_event(ch->fsm, CTC_EVENT_FINSTAT, ch); + else + fsm_event(ch->fsm, CTC_EVENT_IRQ, ch); + +} + +/** + * Add ctcm specific attributes. + * Add ctcm private data. + * + * cgdev pointer to ccwgroup_device just added + * + * returns 0 on success, !0 on failure. + */ +static int ctcm_probe_device(struct ccwgroup_device *cgdev) +{ + struct ctcm_priv *priv; + int rc; + + CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s %p", __FUNCTION__, cgdev); + + if (!get_device(&cgdev->dev)) + return -ENODEV; + + priv = kzalloc(sizeof(struct ctcm_priv), GFP_KERNEL); + if (!priv) { + ctcm_pr_err("%s: Out of memory\n", __FUNCTION__); + put_device(&cgdev->dev); + return -ENOMEM; + } + + rc = ctcm_add_files(&cgdev->dev); + if (rc) { + kfree(priv); + put_device(&cgdev->dev); + return rc; + } + priv->buffer_size = CTCM_BUFSIZE_DEFAULT; + cgdev->cdev[0]->handler = ctcm_irq_handler; + cgdev->cdev[1]->handler = ctcm_irq_handler; + dev_set_drvdata(&cgdev->dev, priv); + + return 0; +} + +/** + * Add a new channel to the list of channels. + * Keeps the channel list sorted. + * + * cdev The ccw_device to be added. + * type The type class of the new channel. + * priv Points to the private data of the ccwgroup_device. + * + * returns 0 on success, !0 on error. + */ +static int add_channel(struct ccw_device *cdev, enum channel_types type, + struct ctcm_priv *priv) +{ + struct channel **c = &channels; + struct channel *ch; + int ccw_num; + int rc = 0; + + CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__); + ch = kzalloc(sizeof(struct channel), GFP_KERNEL); + if (ch == NULL) + goto nomem_return; + + ch->protocol = priv->protocol; + if (IS_MPC(priv)) { + ch->discontact_th = (struct th_header *) + kzalloc(TH_HEADER_LENGTH, gfp_type()); + if (ch->discontact_th == NULL) + goto nomem_return; + + ch->discontact_th->th_blk_flag = TH_DISCONTACT; + tasklet_init(&ch->ch_disc_tasklet, + mpc_action_send_discontact, (unsigned long)ch); + + tasklet_init(&ch->ch_tasklet, ctcmpc_bh, (unsigned long)ch); + ch->max_bufsize = (MPC_BUFSIZE_DEFAULT - 35); + ccw_num = 17; + } else + ccw_num = 8; + + ch->ccw = (struct ccw1 *) + kzalloc(ccw_num * sizeof(struct ccw1), GFP_KERNEL | GFP_DMA); + if (ch->ccw == NULL) + goto nomem_return; + + ch->cdev = cdev; + snprintf(ch->id, CTCM_ID_SIZE, "ch-%s", cdev->dev.bus_id); + ch->type = type; + + /** + * "static" ccws are used in the following way: + * + * ccw[0..2] (Channel program for generic I/O): + * 0: prepare + * 1: read or write (depending on direction) with fixed + * buffer (idal allocated once when buffer is allocated) + * 2: nop + * ccw[3..5] (Channel program for direct write of packets) + * 3: prepare + * 4: write (idal allocated on every write). + * 5: nop + * ccw[6..7] (Channel program for initial channel setup): + * 6: set extended mode + * 7: nop + * + * ch->ccw[0..5] are initialized in ch_action_start because + * the channel's direction is yet unknown here. + * + * ccws used for xid2 negotiations + * ch-ccw[8-14] need to be used for the XID exchange either + * X side XID2 Processing + * 8: write control + * 9: write th + * 10: write XID + * 11: read th from secondary + * 12: read XID from secondary + * 13: read 4 byte ID + * 14: nop + * Y side XID Processing + * 8: sense + * 9: read th + * 10: read XID + * 11: write th + * 12: write XID + * 13: write 4 byte ID + * 14: nop + * + * ccws used for double noop due to VM timing issues + * which result in unrecoverable Busy on channel + * 15: nop + * 16: nop + */ + ch->ccw[6].cmd_code = CCW_CMD_SET_EXTENDED; + ch->ccw[6].flags = CCW_FLAG_SLI; + + ch->ccw[7].cmd_code = CCW_CMD_NOOP; + ch->ccw[7].flags = CCW_FLAG_SLI; + + if (IS_MPC(priv)) { + ch->ccw[15].cmd_code = CCW_CMD_WRITE; + ch->ccw[15].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[15].count = TH_HEADER_LENGTH; + ch->ccw[15].cda = virt_to_phys(ch->discontact_th); + + ch->ccw[16].cmd_code = CCW_CMD_NOOP; + ch->ccw[16].flags = CCW_FLAG_SLI; + + ch->fsm = init_fsm(ch->id, ctc_ch_state_names, + ctc_ch_event_names, CTC_MPC_NR_STATES, + CTC_MPC_NR_EVENTS, ctcmpc_ch_fsm, + mpc_ch_fsm_len, GFP_KERNEL); + } else { + ch->fsm = init_fsm(ch->id, ctc_ch_state_names, + ctc_ch_event_names, CTC_NR_STATES, + CTC_NR_EVENTS, ch_fsm, + ch_fsm_len, GFP_KERNEL); + } + if (ch->fsm == NULL) + goto free_return; + + fsm_newstate(ch->fsm, CTC_STATE_IDLE); + + ch->irb = kzalloc(sizeof(struct irb), GFP_KERNEL); + if (ch->irb == NULL) + goto nomem_return; + + while (*c && ctcm_less_than((*c)->id, ch->id)) + c = &(*c)->next; + + if (*c && (!strncmp((*c)->id, ch->id, CTCM_ID_SIZE))) { + CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, + "%s (%s) already in list, using old entry", + __FUNCTION__, (*c)->id); + + goto free_return; + } + + spin_lock_init(&ch->collect_lock); + + fsm_settimer(ch->fsm, &ch->timer); + skb_queue_head_init(&ch->io_queue); + skb_queue_head_init(&ch->collect_queue); + + if (IS_MPC(priv)) { + fsm_settimer(ch->fsm, &ch->sweep_timer); + skb_queue_head_init(&ch->sweep_queue); + } + ch->next = *c; + *c = ch; + return 0; + +nomem_return: + ctcm_pr_warn("ctcm: Out of memory in %s\n", __FUNCTION__); + rc = -ENOMEM; + +free_return: /* note that all channel pointers are 0 or valid */ + kfree(ch->ccw); /* TODO: check that again */ + kfree(ch->discontact_th); + kfree_fsm(ch->fsm); + kfree(ch->irb); + kfree(ch); + return rc; +} + +/* + * Return type of a detected device. + */ +static enum channel_types get_channel_type(struct ccw_device_id *id) +{ + enum channel_types type; + type = (enum channel_types)id->driver_info; + + if (type == channel_type_ficon) + type = channel_type_escon; + + return type; +} + +/** + * + * Setup an interface. + * + * cgdev Device to be setup. + * + * returns 0 on success, !0 on failure. + */ +static int ctcm_new_device(struct ccwgroup_device *cgdev) +{ + char read_id[CTCM_ID_SIZE]; + char write_id[CTCM_ID_SIZE]; + int direction; + enum channel_types type; + struct ctcm_priv *priv; + struct net_device *dev; + int ret; + + CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__); + + priv = dev_get_drvdata(&cgdev->dev); + if (!priv) + return -ENODEV; + + type = get_channel_type(&cgdev->cdev[0]->id); + + snprintf(read_id, CTCM_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id); + snprintf(write_id, CTCM_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id); + + ret = add_channel(cgdev->cdev[0], type, priv); + if (ret) + return ret; + ret = add_channel(cgdev->cdev[1], type, priv); + if (ret) + return ret; + + ret = ccw_device_set_online(cgdev->cdev[0]); + if (ret != 0) { + CTCM_DBF_TEXT(SETUP, CTC_DBF_WARN, + "ccw_device_set_online (cdev[0]) failed "); + ctcm_pr_warn("ccw_device_set_online (cdev[0]) failed " + "with ret = %d\n", ret); + } + + ret = ccw_device_set_online(cgdev->cdev[1]); + if (ret != 0) { + CTCM_DBF_TEXT(SETUP, CTC_DBF_WARN, + "ccw_device_set_online (cdev[1]) failed "); + ctcm_pr_warn("ccw_device_set_online (cdev[1]) failed " + "with ret = %d\n", ret); + } + + dev = ctcm_init_netdevice(priv); + + if (dev == NULL) { + ctcm_pr_warn("ctcm_init_netdevice failed\n"); + goto out; + } + + for (direction = READ; direction <= WRITE; direction++) { + priv->channel[direction] = + channel_get(type, direction == READ ? read_id : write_id, + direction); + if (priv->channel[direction] == NULL) { + if (direction == WRITE) + channel_free(priv->channel[READ]); + ctcm_free_netdevice(dev); + goto out; + } + priv->channel[direction]->netdev = dev; + priv->channel[direction]->protocol = priv->protocol; + priv->channel[direction]->max_bufsize = priv->buffer_size; + } + /* sysfs magic */ + SET_NETDEV_DEV(dev, &cgdev->dev); + + if (ctcm_netdev_register(dev) != 0) { + ctcm_free_netdevice(dev); + goto out; + } + + if (ctcm_add_attributes(&cgdev->dev)) { + ctcm_netdev_unregister(dev); +/* dev->priv = NULL; why that ???? */ + ctcm_free_netdevice(dev); + goto out; + } + + strlcpy(priv->fsm->name, dev->name, sizeof(priv->fsm->name)); + + CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, + "setup(%s) ok : r/w = %s / %s, proto : %d", + dev->name, priv->channel[READ]->id, + priv->channel[WRITE]->id, priv->protocol); + + return 0; +out: + ccw_device_set_offline(cgdev->cdev[1]); + ccw_device_set_offline(cgdev->cdev[0]); + + return -ENODEV; +} + +/** + * Shutdown an interface. + * + * cgdev Device to be shut down. + * + * returns 0 on success, !0 on failure. + */ +static int ctcm_shutdown_device(struct ccwgroup_device *cgdev) +{ + struct ctcm_priv *priv; + struct net_device *dev; + + priv = dev_get_drvdata(&cgdev->dev); + if (!priv) + return -ENODEV; + + if (priv->channel[READ]) { + dev = priv->channel[READ]->netdev; + CTCM_DBF_DEV(SETUP, dev, ""); + /* Close the device */ + ctcm_close(dev); + dev->flags &= ~IFF_RUNNING; + ctcm_remove_attributes(&cgdev->dev); + channel_free(priv->channel[READ]); + } else + dev = NULL; + + if (priv->channel[WRITE]) + channel_free(priv->channel[WRITE]); + + if (dev) { + ctcm_netdev_unregister(dev); +/* dev->priv = NULL; why that ??? */ + ctcm_free_netdevice(dev); + } + + if (priv->fsm) + kfree_fsm(priv->fsm); + + ccw_device_set_offline(cgdev->cdev[1]); + ccw_device_set_offline(cgdev->cdev[0]); + + if (priv->channel[READ]) + channel_remove(priv->channel[READ]); + if (priv->channel[WRITE]) + channel_remove(priv->channel[WRITE]); + priv->channel[READ] = priv->channel[WRITE] = NULL; + + return 0; + +} + + +static void ctcm_remove_device(struct ccwgroup_device *cgdev) +{ + struct ctcm_priv *priv; + + CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, __FUNCTION__); + + priv = dev_get_drvdata(&cgdev->dev); + if (!priv) + return; + if (cgdev->state == CCWGROUP_ONLINE) + ctcm_shutdown_device(cgdev); + ctcm_remove_files(&cgdev->dev); + dev_set_drvdata(&cgdev->dev, NULL); + kfree(priv); + put_device(&cgdev->dev); +} + +static struct ccwgroup_driver ctcm_group_driver = { + .owner = THIS_MODULE, + .name = CTC_DRIVER_NAME, + .max_slaves = 2, + .driver_id = 0xC3E3C3D4, /* CTCM */ + .probe = ctcm_probe_device, + .remove = ctcm_remove_device, + .set_online = ctcm_new_device, + .set_offline = ctcm_shutdown_device, +}; + + +/* + * Module related routines + */ + +/* + * Prepare to be unloaded. Free IRQ's and release all resources. + * This is called just before this module is unloaded. It is + * not called, if the usage count is !0, so we don't need to check + * for that. + */ +static void __exit ctcm_exit(void) +{ + unregister_cu3088_discipline(&ctcm_group_driver); + ctcm_unregister_dbf_views(); + ctcm_pr_info("CTCM driver unloaded\n"); +} + +/* + * Print Banner. + */ +static void print_banner(void) +{ + printk(KERN_INFO "CTCM driver initialized\n"); +} + +/** + * Initialize module. + * This is called just after the module is loaded. + * + * returns 0 on success, !0 on error. + */ +static int __init ctcm_init(void) +{ + int ret; + + channels = NULL; + + ret = ctcm_register_dbf_views(); + if (ret) { + ctcm_pr_crit("ctcm_init failed with ctcm_register_dbf_views " + "rc = %d\n", ret); + return ret; + } + ret = register_cu3088_discipline(&ctcm_group_driver); + if (ret) { + ctcm_unregister_dbf_views(); + ctcm_pr_crit("ctcm_init failed with register_cu3088_discipline " + "(rc = %d)\n", ret); + return ret; + } + print_banner(); + return ret; +} + +module_init(ctcm_init); +module_exit(ctcm_exit); + +MODULE_AUTHOR("Peter Tiedemann "); +MODULE_DESCRIPTION("Network driver for S/390 CTC + CTCMPC (SNA)"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h new file mode 100644 index 0000000..95b0c0b --- /dev/null +++ b/drivers/s390/net/ctcm_main.h @@ -0,0 +1,287 @@ +/* + * drivers/s390/net/ctcm_main.h + * + * Copyright IBM Corp. 2001, 2007 + * Authors: Fritz Elfert (felfert@millenux.com) + * Peter Tiedemann (ptiedem@de.ibm.com) + */ + +#ifndef _CTCM_MAIN_H_ +#define _CTCM_MAIN_H_ + +#include +#include + +#include +#include + +#include "fsm.h" +#include "cu3088.h" +#include "ctcm_dbug.h" +#include "ctcm_mpc.h" + +#define CTC_DRIVER_NAME "ctcm" +#define CTC_DEVICE_NAME "ctc" +#define CTC_DEVICE_GENE "ctc%d" +#define MPC_DEVICE_NAME "mpc" +#define MPC_DEVICE_GENE "mpc%d" + +#define CHANNEL_FLAGS_READ 0 +#define CHANNEL_FLAGS_WRITE 1 +#define CHANNEL_FLAGS_INUSE 2 +#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4 +#define CHANNEL_FLAGS_FAILED 8 +#define CHANNEL_FLAGS_WAITIRQ 16 +#define CHANNEL_FLAGS_RWMASK 1 +#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK) + +#define LOG_FLAG_ILLEGALPKT 1 +#define LOG_FLAG_ILLEGALSIZE 2 +#define LOG_FLAG_OVERRUN 4 +#define LOG_FLAG_NOMEM 8 + +#define ctcm_pr_debug(fmt, arg...) printk(KERN_DEBUG fmt, ##arg) +#define ctcm_pr_info(fmt, arg...) printk(KERN_INFO fmt, ##arg) +#define ctcm_pr_notice(fmt, arg...) printk(KERN_NOTICE fmt, ##arg) +#define ctcm_pr_warn(fmt, arg...) printk(KERN_WARNING fmt, ##arg) +#define ctcm_pr_emerg(fmt, arg...) printk(KERN_EMERG fmt, ##arg) +#define ctcm_pr_err(fmt, arg...) printk(KERN_ERR fmt, ##arg) +#define ctcm_pr_crit(fmt, arg...) printk(KERN_CRIT fmt, ##arg) + +/* + * CCW commands, used in this driver. + */ +#define CCW_CMD_WRITE 0x01 +#define CCW_CMD_READ 0x02 +#define CCW_CMD_NOOP 0x03 +#define CCW_CMD_TIC 0x08 +#define CCW_CMD_SENSE_CMD 0x14 +#define CCW_CMD_WRITE_CTL 0x17 +#define CCW_CMD_SET_EXTENDED 0xc3 +#define CCW_CMD_PREPARE 0xe3 + +#define CTCM_PROTO_S390 0 +#define CTCM_PROTO_LINUX 1 +#define CTCM_PROTO_LINUX_TTY 2 +#define CTCM_PROTO_OS390 3 +#define CTCM_PROTO_MPC 4 +#define CTCM_PROTO_MAX 4 + +#define CTCM_BUFSIZE_LIMIT 65535 +#define CTCM_BUFSIZE_DEFAULT 32768 +#define MPC_BUFSIZE_DEFAULT CTCM_BUFSIZE_LIMIT + +#define CTCM_TIME_1_SEC 1000 +#define CTCM_TIME_5_SEC 5000 +#define CTCM_TIME_10_SEC 10000 + +#define CTCM_INITIAL_BLOCKLEN 2 + +#define READ 0 +#define WRITE 1 + +#define CTCM_ID_SIZE BUS_ID_SIZE+3 + +struct ctcm_profile { + unsigned long maxmulti; + unsigned long maxcqueue; + unsigned long doios_single; + unsigned long doios_multi; + unsigned long txlen; + unsigned long tx_time; + struct timespec send_stamp; +}; + +/* + * Definition of one channel + */ +struct channel { + struct channel *next; + char id[CTCM_ID_SIZE]; + struct ccw_device *cdev; + /* + * Type of this channel. + * CTC/A or Escon for valid channels. + */ + enum channel_types type; + /* + * Misc. flags. See CHANNEL_FLAGS_... below + */ + __u32 flags; + __u16 protocol; /* protocol of this channel (4 = MPC) */ + /* + * I/O and irq related stuff + */ + struct ccw1 *ccw; + struct irb *irb; + /* + * RX/TX buffer size + */ + int max_bufsize; + struct sk_buff *trans_skb; /* transmit/receive buffer */ + struct sk_buff_head io_queue; /* universal I/O queue */ + struct tasklet_struct ch_tasklet; /* MPC ONLY */ + /* + * TX queue for collecting skb's during busy. + */ + struct sk_buff_head collect_queue; + /* + * Amount of data in collect_queue. + */ + int collect_len; + /* + * spinlock for collect_queue and collect_len + */ + spinlock_t collect_lock; + /* + * Timer for detecting unresposive + * I/O operations. + */ + fsm_timer timer; + /* MPC ONLY section begin */ + __u32 th_seq_num; /* SNA TH seq number */ + __u8 th_seg; + __u32 pdu_seq; + struct sk_buff *xid_skb; + char *xid_skb_data; + struct th_header *xid_th; + struct xid2 *xid; + char *xid_id; + struct th_header *rcvd_xid_th; + struct xid2 *rcvd_xid; + char *rcvd_xid_id; + __u8 in_mpcgroup; + fsm_timer sweep_timer; + struct sk_buff_head sweep_queue; + struct th_header *discontact_th; + struct tasklet_struct ch_disc_tasklet; + /* MPC ONLY section end */ + + int retry; /* retry counter for misc. operations */ + fsm_instance *fsm; /* finite state machine of this channel */ + struct net_device *netdev; /* corresponding net_device */ + struct ctcm_profile prof; + unsigned char *trans_skb_data; + __u16 logflags; +}; + +struct ctcm_priv { + struct net_device_stats stats; + unsigned long tbusy; + + /* The MPC group struct of this interface */ + struct mpc_group *mpcg; /* MPC only */ + struct xid2 *xid; /* MPC only */ + + /* The finite state machine of this interface */ + fsm_instance *fsm; + + /* The protocol of this device */ + __u16 protocol; + + /* Timer for restarting after I/O Errors */ + fsm_timer restart_timer; + + int buffer_size; /* ctc only */ + + struct channel *channel[2]; +}; + +int ctcm_open(struct net_device *dev); +int ctcm_close(struct net_device *dev); + +/* + * prototypes for non-static sysfs functions + */ +int ctcm_add_attributes(struct device *dev); +void ctcm_remove_attributes(struct device *dev); +int ctcm_add_files(struct device *dev); +void ctcm_remove_files(struct device *dev); + +/* + * Compatibility macros for busy handling + * of network devices. + */ +static inline void ctcm_clear_busy_do(struct net_device *dev) +{ + clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy)); + netif_wake_queue(dev); +} + +static inline void ctcm_clear_busy(struct net_device *dev) +{ + struct mpc_group *grp; + grp = ((struct ctcm_priv *)dev->priv)->mpcg; + + if (!(grp && grp->in_sweep)) + ctcm_clear_busy_do(dev); +} + + +static inline int ctcm_test_and_set_busy(struct net_device *dev) +{ + netif_stop_queue(dev); + return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy)); +} + +extern int loglevel; +extern struct channel *channels; + +void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb); + +/* + * Functions related to setup and device detection. + */ + +static inline int ctcm_less_than(char *id1, char *id2) +{ + unsigned long dev1, dev2; + + id1 = id1 + 5; + id2 = id2 + 5; + + dev1 = simple_strtoul(id1, &id1, 16); + dev2 = simple_strtoul(id2, &id2, 16); + + return (dev1 < dev2); +} + +int ctcm_ch_alloc_buffer(struct channel *ch); + +static inline int ctcm_checkalloc_buffer(struct channel *ch) +{ + if (ch->trans_skb == NULL) + return ctcm_ch_alloc_buffer(ch); + if (ch->flags & CHANNEL_FLAGS_BUFSIZE_CHANGED) { + dev_kfree_skb(ch->trans_skb); + return ctcm_ch_alloc_buffer(ch); + } + return 0; +} + +struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv); + +/* test if protocol attribute (of struct ctcm_priv or struct channel) + * has MPC protocol setting. Type is not checked + */ +#define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC) + +/* test if struct ctcm_priv of struct net_device has MPC protocol setting */ +#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv) + +static inline gfp_t gfp_type(void) +{ + return in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; +} + +/* + * Definition of our link level header. + */ +struct ll_header { + __u16 length; + __u16 type; + __u16 unused; +}; +#define LL_HEADER_LENGTH (sizeof(struct ll_header)) + +#endif diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c new file mode 100644 index 0000000..044adde --- /dev/null +++ b/drivers/s390/net/ctcm_mpc.c @@ -0,0 +1,2472 @@ +/* + * drivers/s390/net/ctcm_mpc.c + * + * Copyright IBM Corp. 2004, 2007 + * Authors: Belinda Thompson (belindat@us.ibm.com) + * Andy Richter (richtera@us.ibm.com) + * Peter Tiedemann (ptiedem@de.ibm.com) + */ + +/* + This module exports functions to be used by CCS: + EXPORT_SYMBOL(ctc_mpc_alloc_channel); + EXPORT_SYMBOL(ctc_mpc_establish_connectivity); + EXPORT_SYMBOL(ctc_mpc_dealloc_ch); + EXPORT_SYMBOL(ctc_mpc_flow_control); +*/ + +#undef DEBUG +#undef DEBUGDATA +#undef DEBUGCCW + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include /* instead of ok ? */ +#include +#include +#include /* instead of ok ? */ +#include /* instead of ok ? */ +#include +#include +#include + +#include "cu3088.h" +#include "ctcm_mpc.h" +#include "ctcm_main.h" +#include "ctcm_fsms.h" + +static const struct xid2 init_xid = { + .xid2_type_id = XID_FM2, + .xid2_len = 0x45, + .xid2_adj_id = 0, + .xid2_rlen = 0x31, + .xid2_resv1 = 0, + .xid2_flag1 = 0, + .xid2_fmtt = 0, + .xid2_flag4 = 0x80, + .xid2_resv2 = 0, + .xid2_tgnum = 0, + .xid2_sender_id = 0, + .xid2_flag2 = 0, + .xid2_option = XID2_0, + .xid2_resv3 = "\x00", + .xid2_resv4 = 0, + .xid2_dlc_type = XID2_READ_SIDE, + .xid2_resv5 = 0, + .xid2_mpc_flag = 0, + .xid2_resv6 = 0, + .xid2_buf_len = (MPC_BUFSIZE_DEFAULT - 35), +}; + +static const struct th_header thnorm = { + .th_seg = 0x00, + .th_ch_flag = TH_IS_XID, + .th_blk_flag = TH_DATA_IS_XID, + .th_is_xid = 0x01, + .th_seq_num = 0x00000000, +}; + +static const struct th_header thdummy = { + .th_seg = 0x00, + .th_ch_flag = 0x00, + .th_blk_flag = TH_DATA_IS_XID, + .th_is_xid = 0x01, + .th_seq_num = 0x00000000, +}; + +/* + * Definition of one MPC group + */ + +/* + * Compatibility macros for busy handling + * of network devices. + */ + +static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb); + +/* + * MPC Group state machine actions (static prototypes) + */ +static void mpc_action_nop(fsm_instance *fsm, int event, void *arg); +static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg); +static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg); +static void mpc_action_timeout(fsm_instance *fi, int event, void *arg); +static int mpc_validate_xid(struct mpcg_info *mpcginfo); +static void mpc_action_yside_xid(fsm_instance *fsm, int event, void *arg); +static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg); +static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg); +static void mpc_action_xside_xid(fsm_instance *fsm, int event, void *arg); +static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg); +static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg); + +#ifdef DEBUGDATA +/*-------------------------------------------------------------------* +* Dump buffer format * +* * +*--------------------------------------------------------------------*/ +void ctcmpc_dumpit(char *buf, int len) +{ + __u32 ct, sw, rm, dup; + char *ptr, *rptr; + char tbuf[82], tdup[82]; + #if (UTS_MACHINE == s390x) + char addr[22]; + #else + char addr[12]; + #endif + char boff[12]; + char bhex[82], duphex[82]; + char basc[40]; + + sw = 0; + rptr = ptr = buf; + rm = 16; + duphex[0] = 0x00; + dup = 0; + + for (ct = 0; ct < len; ct++, ptr++, rptr++) { + if (sw == 0) { + #if (UTS_MACHINE == s390x) + sprintf(addr, "%16.16lx", (unsigned long)rptr); + #else + sprintf(addr, "%8.8X", (__u32)rptr); + #endif + + sprintf(boff, "%4.4X", (__u32)ct); + bhex[0] = '\0'; + basc[0] = '\0'; + } + if ((sw == 4) || (sw == 12)) + strcat(bhex, " "); + if (sw == 8) + strcat(bhex, " "); + + #if (UTS_MACHINE == s390x) + sprintf(tbuf, "%2.2lX", (unsigned long)*ptr); + #else + sprintf(tbuf, "%2.2X", (__u32)*ptr); + #endif + + tbuf[2] = '\0'; + strcat(bhex, tbuf); + if ((0 != isprint(*ptr)) && (*ptr >= 0x20)) + basc[sw] = *ptr; + else + basc[sw] = '.'; + + basc[sw+1] = '\0'; + sw++; + rm--; + if (sw == 16) { + if ((strcmp(duphex, bhex)) != 0) { + if (dup != 0) { + sprintf(tdup, "Duplicate as above " + "to %s", addr); + printk(KERN_INFO " " + " --- %s ---\n", tdup); + } + printk(KERN_INFO " %s (+%s) : %s [%s]\n", + addr, boff, bhex, basc); + dup = 0; + strcpy(duphex, bhex); + } else + dup++; + + sw = 0; + rm = 16; + } + } /* endfor */ + + if (sw != 0) { + for ( ; rm > 0; rm--, sw++) { + if ((sw == 4) || (sw == 12)) + strcat(bhex, " "); + if (sw == 8) + strcat(bhex, " "); + strcat(bhex, " "); + strcat(basc, " "); + } + if (dup != 0) { + sprintf(tdup, "Duplicate as above to %s", addr); + printk(KERN_INFO " " + " --- %s ---\n", tdup); + } + printk(KERN_INFO " %s (+%s) : %s [%s]\n", + addr, boff, bhex, basc); + } else { + if (dup >= 1) { + sprintf(tdup, "Duplicate as above to %s", addr); + printk(KERN_INFO " " + " --- %s ---\n", tdup); + } + if (dup != 0) { + printk(KERN_INFO " %s (+%s) : %s [%s]\n", + addr, boff, bhex, basc); + } + } + + return; + +} /* end of ctcmpc_dumpit */ +#endif + +#ifdef DEBUGDATA +/* + * Dump header and first 16 bytes of an sk_buff for debugging purposes. + * + * skb The sk_buff to dump. + * offset Offset relative to skb-data, where to start the dump. + */ +void ctcmpc_dump_skb(struct sk_buff *skb, int offset) +{ + unsigned char *p = skb->data; + struct th_header *header; + struct pdu *pheader; + int bl = skb->len; + int i; + + if (p == NULL) + return; + + p += offset; + header = (struct th_header *)p; + + printk(KERN_INFO "dump:\n"); + printk(KERN_INFO "skb len=%d \n", skb->len); + if (skb->len > 2) { + switch (header->th_ch_flag) { + case TH_HAS_PDU: + break; + case 0x00: + case TH_IS_XID: + if ((header->th_blk_flag == TH_DATA_IS_XID) && + (header->th_is_xid == 0x01)) + goto dumpth; + case TH_SWEEP_REQ: + goto dumpth; + case TH_SWEEP_RESP: + goto dumpth; + default: + break; + } + + pheader = (struct pdu *)p; + printk(KERN_INFO "pdu->offset: %d hex: %04x\n", + pheader->pdu_offset, pheader->pdu_offset); + printk(KERN_INFO "pdu->flag : %02x\n", pheader->pdu_flag); + printk(KERN_INFO "pdu->proto : %02x\n", pheader->pdu_proto); + printk(KERN_INFO "pdu->seq : %02x\n", pheader->pdu_seq); + goto dumpdata; + +dumpth: + printk(KERN_INFO "th->seg : %02x\n", header->th_seg); + printk(KERN_INFO "th->ch : %02x\n", header->th_ch_flag); + printk(KERN_INFO "th->blk_flag: %02x\n", header->th_blk_flag); + printk(KERN_INFO "th->type : %s\n", + (header->th_is_xid) ? "DATA" : "XID"); + printk(KERN_INFO "th->seqnum : %04x\n", header->th_seq_num); + + } +dumpdata: + if (bl > 32) + bl = 32; + printk(KERN_INFO "data: "); + for (i = 0; i < bl; i++) + printk(KERN_INFO "%02x%s", *p++, (i % 16) ? " " : "\n<7>"); + printk(KERN_INFO "\n"); +} +#endif + +/* + * ctc_mpc_alloc_channel + * (exported interface) + * + * Device Initialization : + * ACTPATH driven IO operations + */ +int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int)) +{ + char device[20]; + struct net_device *dev; + struct mpc_group *grp; + struct ctcm_priv *priv; + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + + sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num); + dev = __dev_get_by_name(&init_net, device); + + if (dev == NULL) { + printk(KERN_INFO "ctc_mpc_alloc_channel %s dev=NULL\n", device); + return 1; + } + + priv = dev->priv; + grp = priv->mpcg; + if (!grp) + return 1; + + grp->allochanfunc = callback; + grp->port_num = port_num; + grp->port_persist = 1; + + ctcm_pr_debug("ctcmpc: %s called for device %s state=%s\n", + __FUNCTION__, + dev->name, + fsm_getstate_str(grp->fsm)); + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_INOP: + /* Group is in the process of terminating */ + grp->alloc_called = 1; + break; + case MPCG_STATE_RESET: + /* MPC Group will transition to state */ + /* MPCG_STATE_XID2INITW iff the minimum number */ + /* of 1 read and 1 write channel have successfully*/ + /* activated */ + /*fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW);*/ + if (callback) + grp->send_qllc_disc = 1; + case MPCG_STATE_XID0IOWAIT: + fsm_deltimer(&grp->timer); + grp->outstanding_xid2 = 0; + grp->outstanding_xid7 = 0; + grp->outstanding_xid7_p2 = 0; + grp->saved_xid2 = NULL; + if (callback) + ctcm_open(dev); + fsm_event(priv->fsm, DEV_EVENT_START, dev); + break; + case MPCG_STATE_READY: + /* XID exchanges completed after PORT was activated */ + /* Link station already active */ + /* Maybe timing issue...retry callback */ + grp->allocchan_callback_retries++; + if (grp->allocchan_callback_retries < 4) { + if (grp->allochanfunc) + grp->allochanfunc(grp->port_num, + grp->group_max_buflen); + } else { + /* there are problems...bail out */ + /* there may be a state mismatch so restart */ + grp->port_persist = 1; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + grp->allocchan_callback_retries = 0; + } + break; + default: + return 0; + + } + + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return 0; +} +EXPORT_SYMBOL(ctc_mpc_alloc_channel); + +/* + * ctc_mpc_establish_connectivity + * (exported interface) + */ +void ctc_mpc_establish_connectivity(int port_num, + void (*callback)(int, int, int)) +{ + char device[20]; + struct net_device *dev; + struct mpc_group *grp; + struct ctcm_priv *priv; + struct channel *rch, *wch; + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + + sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num); + dev = __dev_get_by_name(&init_net, device); + + if (dev == NULL) { + printk(KERN_INFO "ctc_mpc_establish_connectivity " + "%s dev=NULL\n", device); + return; + } + priv = dev->priv; + rch = priv->channel[READ]; + wch = priv->channel[WRITE]; + + grp = priv->mpcg; + + ctcm_pr_debug("ctcmpc: %s() called for device %s state=%s\n", + __FUNCTION__, dev->name, + fsm_getstate_str(grp->fsm)); + + grp->estconnfunc = callback; + grp->port_num = port_num; + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_READY: + /* XID exchanges completed after PORT was activated */ + /* Link station already active */ + /* Maybe timing issue...retry callback */ + fsm_deltimer(&grp->timer); + grp->estconn_callback_retries++; + if (grp->estconn_callback_retries < 4) { + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, 0, + grp->group_max_buflen); + grp->estconnfunc = NULL; + } + } else { + /* there are problems...bail out */ + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + grp->estconn_callback_retries = 0; + } + break; + case MPCG_STATE_INOP: + case MPCG_STATE_RESET: + /* MPC Group is not ready to start XID - min num of */ + /* 1 read and 1 write channel have not been acquired*/ + printk(KERN_WARNING "ctcmpc: %s() REJECTED ACTIVE XID Req" + "uest - Channel Pair is not Active\n", __FUNCTION__); + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, -1, 0); + grp->estconnfunc = NULL; + } + break; + case MPCG_STATE_XID2INITW: + /* alloc channel was called but no XID exchange */ + /* has occurred. initiate xside XID exchange */ + /* make sure yside XID0 processing has not started */ + if ((fsm_getstate(rch->fsm) > CH_XID0_PENDING) || + (fsm_getstate(wch->fsm) > CH_XID0_PENDING)) { + printk(KERN_WARNING "mpc: %s() ABORT ACTIVE XID" + " Request- PASSIVE XID in process\n" + , __FUNCTION__); + break; + } + grp->send_qllc_disc = 1; + fsm_newstate(grp->fsm, MPCG_STATE_XID0IOWAIT); + fsm_deltimer(&grp->timer); + fsm_addtimer(&grp->timer, MPC_XID_TIMEOUT_VALUE, + MPCG_EVENT_TIMER, dev); + grp->outstanding_xid7 = 0; + grp->outstanding_xid7_p2 = 0; + grp->saved_xid2 = NULL; + if ((rch->in_mpcgroup) && + (fsm_getstate(rch->fsm) == CH_XID0_PENDING)) + fsm_event(grp->fsm, MPCG_EVENT_XID0DO, rch); + else { + printk(KERN_WARNING "mpc: %s() Unable to start" + " ACTIVE XID0 on read channel\n", + __FUNCTION__); + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, -1, 0); + grp->estconnfunc = NULL; + } + fsm_deltimer(&grp->timer); + goto done; + } + if ((wch->in_mpcgroup) && + (fsm_getstate(wch->fsm) == CH_XID0_PENDING)) + fsm_event(grp->fsm, MPCG_EVENT_XID0DO, wch); + else { + printk(KERN_WARNING "mpc: %s() Unable to start" + " ACTIVE XID0 on write channel\n", + __FUNCTION__); + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, -1, 0); + grp->estconnfunc = NULL; + } + fsm_deltimer(&grp->timer); + goto done; + } + break; + case MPCG_STATE_XID0IOWAIT: + /* already in active XID negotiations */ + default: + break; + } + +done: + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return; +} +EXPORT_SYMBOL(ctc_mpc_establish_connectivity); + +/* + * ctc_mpc_dealloc_ch + * (exported interface) + */ +void ctc_mpc_dealloc_ch(int port_num) +{ + struct net_device *dev; + char device[20]; + struct ctcm_priv *priv; + struct mpc_group *grp; + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num); + dev = __dev_get_by_name(&init_net, device); + + if (dev == NULL) { + printk(KERN_INFO "%s() %s dev=NULL\n", __FUNCTION__, device); + goto done; + } + + ctcm_pr_debug("ctcmpc:%s %s() called for device %s refcount=%d\n", + dev->name, __FUNCTION__, + dev->name, atomic_read(&dev->refcnt)); + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s() %s priv=NULL\n", + __FUNCTION__, device); + goto done; + } + fsm_deltimer(&priv->restart_timer); + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "%s() %s dev=NULL\n", __FUNCTION__, device); + goto done; + } + grp->channels_terminating = 0; + + fsm_deltimer(&grp->timer); + + grp->allochanfunc = NULL; + grp->estconnfunc = NULL; + grp->port_persist = 0; + grp->send_qllc_disc = 0; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + + ctcm_close(dev); +done: + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return; +} +EXPORT_SYMBOL(ctc_mpc_dealloc_ch); + +/* + * ctc_mpc_flow_control + * (exported interface) + */ +void ctc_mpc_flow_control(int port_num, int flowc) +{ + char device[20]; + struct ctcm_priv *priv; + struct mpc_group *grp; + struct net_device *dev; + struct channel *rch; + int mpcg_state; + + ctcm_pr_debug("ctcmpc enter: %s() %i\n", __FUNCTION__, flowc); + + sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num); + dev = __dev_get_by_name(&init_net, device); + + if (dev == NULL) { + printk(KERN_INFO "ctc_mpc_flow_control %s dev=NULL\n", device); + return; + } + + ctcm_pr_debug("ctcmpc: %s %s called \n", dev->name, __FUNCTION__); + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "ctcmpc:%s() %s priv=NULL\n", + __FUNCTION__, device); + return; + } + grp = priv->mpcg; + rch = priv->channel[READ]; + + mpcg_state = fsm_getstate(grp->fsm); + switch (flowc) { + case 1: + if (mpcg_state == MPCG_STATE_FLOWC) + break; + if (mpcg_state == MPCG_STATE_READY) { + if (grp->flow_off_called == 1) + grp->flow_off_called = 0; + else + fsm_newstate(grp->fsm, MPCG_STATE_FLOWC); + break; + } + break; + case 0: + if (mpcg_state == MPCG_STATE_FLOWC) { + fsm_newstate(grp->fsm, MPCG_STATE_READY); + /* ensure any data that has accumulated */ + /* on the io_queue will now be sen t */ + tasklet_schedule(&rch->ch_tasklet); + } + /* possible race condition */ + if (mpcg_state == MPCG_STATE_READY) { + grp->flow_off_called = 1; + break; + } + break; + } + + ctcm_pr_debug("ctcmpc exit: %s() %i\n", __FUNCTION__, flowc); +} +EXPORT_SYMBOL(ctc_mpc_flow_control); + +static int mpc_send_qllc_discontact(struct net_device *); + +/* + * helper function of ctcmpc_unpack_skb +*/ +static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo) +{ + struct channel *rch = mpcginfo->ch; + struct net_device *dev = rch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct channel *ch = priv->channel[WRITE]; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + + if (do_debug_data) + ctcmpc_dumpit((char *)mpcginfo->sweep, TH_SWEEP_LENGTH); + + grp->sweep_rsp_pend_num--; + + if ((grp->sweep_req_pend_num == 0) && + (grp->sweep_rsp_pend_num == 0)) { + fsm_deltimer(&ch->sweep_timer); + grp->in_sweep = 0; + rch->th_seq_num = 0x00; + ch->th_seq_num = 0x00; + ctcm_clear_busy_do(dev); + } + + kfree(mpcginfo); + + return; + +} + +/* + * helper function of mpc_rcvd_sweep_req + * which is a helper of ctcmpc_unpack_skb + */ +static void ctcmpc_send_sweep_resp(struct channel *rch) +{ + struct net_device *dev = rch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + int rc = 0; + struct th_sweep *header; + struct sk_buff *sweep_skb; + struct channel *ch = priv->channel[WRITE]; + + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n", + __FUNCTION__, rch, rch->id); + + sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, + GFP_ATOMIC|GFP_DMA); + if (sweep_skb == NULL) { + printk(KERN_INFO "Couldn't alloc sweep_skb\n"); + rc = -ENOMEM; + goto done; + } + + header = (struct th_sweep *) + kmalloc(sizeof(struct th_sweep), gfp_type()); + + if (!header) { + dev_kfree_skb_any(sweep_skb); + rc = -ENOMEM; + goto done; + } + + header->th.th_seg = 0x00 ; + header->th.th_ch_flag = TH_SWEEP_RESP; + header->th.th_blk_flag = 0x00; + header->th.th_is_xid = 0x00; + header->th.th_seq_num = 0x00; + header->sw.th_last_seq = ch->th_seq_num; + + memcpy(skb_put(sweep_skb, TH_SWEEP_LENGTH), header, TH_SWEEP_LENGTH); + + kfree(header); + + dev->trans_start = jiffies; + skb_queue_tail(&ch->sweep_queue, sweep_skb); + + fsm_addtimer(&ch->sweep_timer, 100, CTC_EVENT_RSWEEP_TIMER, ch); + + return; + +done: + if (rc != 0) { + grp->in_sweep = 0; + ctcm_clear_busy_do(dev); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + } + + return; +} + +/* + * helper function of ctcmpc_unpack_skb + */ +static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo) +{ + struct channel *rch = mpcginfo->ch; + struct net_device *dev = rch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct channel *ch = priv->channel[WRITE]; + + if (do_debug) + CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG, + " %s(): ch=0x%p id=%s\n", __FUNCTION__, ch, ch->id); + + if (grp->in_sweep == 0) { + grp->in_sweep = 1; + ctcm_test_and_set_busy(dev); + grp->sweep_req_pend_num = grp->active_channels[READ]; + grp->sweep_rsp_pend_num = grp->active_channels[READ]; + } + + if (do_debug_data) + ctcmpc_dumpit((char *)mpcginfo->sweep, TH_SWEEP_LENGTH); + + grp->sweep_req_pend_num--; + ctcmpc_send_sweep_resp(ch); + kfree(mpcginfo); + return; +} + +/* + * MPC Group Station FSM definitions + */ +static const char *mpcg_event_names[] = { + [MPCG_EVENT_INOP] = "INOP Condition", + [MPCG_EVENT_DISCONC] = "Discontact Received", + [MPCG_EVENT_XID0DO] = "Channel Active - Start XID", + [MPCG_EVENT_XID2] = "XID2 Received", + [MPCG_EVENT_XID2DONE] = "XID0 Complete", + [MPCG_EVENT_XID7DONE] = "XID7 Complete", + [MPCG_EVENT_TIMER] = "XID Setup Timer", + [MPCG_EVENT_DOIO] = "XID DoIO", +}; + +static const char *mpcg_state_names[] = { + [MPCG_STATE_RESET] = "Reset", + [MPCG_STATE_INOP] = "INOP", + [MPCG_STATE_XID2INITW] = "Passive XID- XID0 Pending Start", + [MPCG_STATE_XID2INITX] = "Passive XID- XID0 Pending Complete", + [MPCG_STATE_XID7INITW] = "Passive XID- XID7 Pending P1 Start", + [MPCG_STATE_XID7INITX] = "Passive XID- XID7 Pending P2 Complete", + [MPCG_STATE_XID0IOWAIT] = "Active XID- XID0 Pending Start", + [MPCG_STATE_XID0IOWAIX] = "Active XID- XID0 Pending Complete", + [MPCG_STATE_XID7INITI] = "Active XID- XID7 Pending Start", + [MPCG_STATE_XID7INITZ] = "Active XID- XID7 Pending Complete ", + [MPCG_STATE_XID7INITF] = "XID - XID7 Complete ", + [MPCG_STATE_FLOWC] = "FLOW CONTROL ON", + [MPCG_STATE_READY] = "READY", +}; + +/* + * The MPC Group Station FSM + * 22 events + */ +static const fsm_node mpcg_fsm[] = { + { MPCG_STATE_RESET, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_INOP, MPCG_EVENT_INOP, mpc_action_nop }, + { MPCG_STATE_FLOWC, MPCG_EVENT_INOP, mpc_action_go_inop }, + + { MPCG_STATE_READY, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_READY, MPCG_EVENT_INOP, mpc_action_go_inop }, + + { MPCG_STATE_XID2INITW, MPCG_EVENT_XID0DO, mpc_action_doxid0 }, + { MPCG_STATE_XID2INITW, MPCG_EVENT_XID2, mpc_action_rcvd_xid0 }, + { MPCG_STATE_XID2INITW, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID2INITW, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID2INITW, MPCG_EVENT_DOIO, mpc_action_yside_xid }, + + { MPCG_STATE_XID2INITX, MPCG_EVENT_XID0DO, mpc_action_doxid0 }, + { MPCG_STATE_XID2INITX, MPCG_EVENT_XID2, mpc_action_rcvd_xid0 }, + { MPCG_STATE_XID2INITX, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID2INITX, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID2INITX, MPCG_EVENT_DOIO, mpc_action_yside_xid }, + + { MPCG_STATE_XID7INITW, MPCG_EVENT_XID2DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_XID2, mpc_action_rcvd_xid7 }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_XID7DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITW, MPCG_EVENT_DOIO, mpc_action_yside_xid }, + + { MPCG_STATE_XID7INITX, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID7INITX, MPCG_EVENT_XID2, mpc_action_rcvd_xid7 }, + { MPCG_STATE_XID7INITX, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID7INITX, MPCG_EVENT_XID7DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITX, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID7INITX, MPCG_EVENT_DOIO, mpc_action_yside_xid }, + + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_XID0DO, mpc_action_doxid0 }, + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_XID2, mpc_action_rcvd_xid0 }, + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID0IOWAIT, MPCG_EVENT_DOIO, mpc_action_xside_xid }, + + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_XID0DO, mpc_action_doxid0 }, + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_XID2, mpc_action_rcvd_xid0 }, + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID0IOWAIX, MPCG_EVENT_DOIO, mpc_action_xside_xid }, + + { MPCG_STATE_XID7INITI, MPCG_EVENT_XID2DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_XID2, mpc_action_rcvd_xid7 }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_XID7DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITI, MPCG_EVENT_DOIO, mpc_action_xside_xid }, + + { MPCG_STATE_XID7INITZ, MPCG_EVENT_XID2, mpc_action_rcvd_xid7 }, + { MPCG_STATE_XID7INITZ, MPCG_EVENT_XID7DONE, mpc_action_doxid7 }, + { MPCG_STATE_XID7INITZ, MPCG_EVENT_DISCONC, mpc_action_discontact }, + { MPCG_STATE_XID7INITZ, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID7INITZ, MPCG_EVENT_TIMER, mpc_action_timeout }, + { MPCG_STATE_XID7INITZ, MPCG_EVENT_DOIO, mpc_action_xside_xid }, + + { MPCG_STATE_XID7INITF, MPCG_EVENT_INOP, mpc_action_go_inop }, + { MPCG_STATE_XID7INITF, MPCG_EVENT_XID7DONE, mpc_action_go_ready }, +}; + +static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm); + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv = NULL; + struct mpc_group *grp = NULL; + + if (dev == NULL) { + printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__); + return; + } + + ctcm_pr_debug("ctcmpc enter: %s %s()\n", dev->name, __FUNCTION__); + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__); + return; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "%s() grp=NULL\n", __FUNCTION__); + return; + } + + fsm_deltimer(&grp->timer); + + if (grp->saved_xid2->xid2_flag2 == 0x40) { + priv->xid->xid2_flag2 = 0x00; + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, 1, + grp->group_max_buflen); + grp->estconnfunc = NULL; + } else if (grp->allochanfunc) + grp->send_qllc_disc = 1; + goto done; + } + + grp->port_persist = 1; + grp->out_of_sequence = 0; + grp->estconn_called = 0; + + tasklet_hi_schedule(&grp->mpc_tasklet2); + + ctcm_pr_debug("ctcmpc exit: %s %s()\n", dev->name, __FUNCTION__); + return; + +done: + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + + + ctcm_pr_info("ctcmpc: %s()failure occurred\n", __FUNCTION__); +} + +/* + * helper of ctcm_init_netdevice + * CTCM_PROTO_MPC only + */ +void mpc_group_ready(unsigned long adev) +{ + struct net_device *dev = (struct net_device *)adev; + struct ctcm_priv *priv = NULL; + struct mpc_group *grp = NULL; + struct channel *ch = NULL; + + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + + if (dev == NULL) { + printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__); + return; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__); + return; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "ctcmpc:%s() grp=NULL\n", __FUNCTION__); + return; + } + + printk(KERN_NOTICE "ctcmpc: %s GROUP TRANSITIONED TO READY" + " maxbuf:%d\n", + dev->name, grp->group_max_buflen); + + fsm_newstate(grp->fsm, MPCG_STATE_READY); + + /* Put up a read on the channel */ + ch = priv->channel[READ]; + ch->pdu_seq = 0; + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() ToDCM_pdu_seq= %08x\n" , + __FUNCTION__, ch->pdu_seq); + + ctcmpc_chx_rxidle(ch->fsm, CTC_EVENT_START, ch); + /* Put the write channel in idle state */ + ch = priv->channel[WRITE]; + if (ch->collect_len > 0) { + spin_lock(&ch->collect_lock); + ctcm_purge_skb_queue(&ch->collect_queue); + ch->collect_len = 0; + spin_unlock(&ch->collect_lock); + } + ctcm_chx_txidle(ch->fsm, CTC_EVENT_START, ch); + + ctcm_clear_busy(dev); + + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, 0, + grp->group_max_buflen); + grp->estconnfunc = NULL; + } else + if (grp->allochanfunc) + grp->allochanfunc(grp->port_num, + grp->group_max_buflen); + + grp->send_qllc_disc = 1; + grp->changed_side = 0; + + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return; + +} + +/* + * Increment the MPC Group Active Channel Counts + * helper of dev_action (called from channel fsm) + */ +int mpc_channel_action(struct channel *ch, int direction, int action) +{ + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv; + struct mpc_group *grp = NULL; + int rc = 0; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + + if (dev == NULL) { + printk(KERN_INFO "ctcmpc_channel_action %i dev=NULL\n", + action); + rc = 1; + goto done; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO + "ctcmpc_channel_action%i priv=NULL, dev=%s\n", + action, dev->name); + rc = 2; + goto done; + } + + grp = priv->mpcg; + + if (grp == NULL) { + printk(KERN_INFO "ctcmpc: %s()%i mpcgroup=NULL, dev=%s\n", + __FUNCTION__, action, dev->name); + rc = 3; + goto done; + } + + ctcm_pr_info( + "ctcmpc: %s() %i(): Grp:%s total_channel_paths=%i " + "active_channels read=%i, write=%i\n", + __FUNCTION__, + action, + fsm_getstate_str(grp->fsm), + grp->num_channel_paths, + grp->active_channels[READ], + grp->active_channels[WRITE]); + + if ((action == MPC_CHANNEL_ADD) && (ch->in_mpcgroup == 0)) { + grp->num_channel_paths++; + grp->active_channels[direction]++; + grp->outstanding_xid2++; + ch->in_mpcgroup = 1; + + if (ch->xid_skb != NULL) + dev_kfree_skb_any(ch->xid_skb); + + ch->xid_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, + GFP_ATOMIC | GFP_DMA); + if (ch->xid_skb == NULL) { + printk(KERN_INFO "ctcmpc: %s()" + "Couldn't alloc ch xid_skb\n", __FUNCTION__); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + return 1; + } + ch->xid_skb_data = ch->xid_skb->data; + ch->xid_th = (struct th_header *)ch->xid_skb->data; + skb_put(ch->xid_skb, TH_HEADER_LENGTH); + ch->xid = (struct xid2 *)skb_tail_pointer(ch->xid_skb); + skb_put(ch->xid_skb, XID2_LENGTH); + ch->xid_id = skb_tail_pointer(ch->xid_skb); + ch->xid_skb->data = ch->xid_skb_data; + skb_reset_tail_pointer(ch->xid_skb); + ch->xid_skb->len = 0; + + memcpy(skb_put(ch->xid_skb, grp->xid_skb->len), + grp->xid_skb->data, + grp->xid_skb->len); + + ch->xid->xid2_dlc_type = ((CHANNEL_DIRECTION(ch->flags) == READ) + ? XID2_READ_SIDE : XID2_WRITE_SIDE); + + if (CHANNEL_DIRECTION(ch->flags) == WRITE) + ch->xid->xid2_buf_len = 0x00; + + ch->xid_skb->data = ch->xid_skb_data; + skb_reset_tail_pointer(ch->xid_skb); + ch->xid_skb->len = 0; + + fsm_newstate(ch->fsm, CH_XID0_PENDING); + + if ((grp->active_channels[READ] > 0) && + (grp->active_channels[WRITE] > 0) && + (fsm_getstate(grp->fsm) < MPCG_STATE_XID2INITW)) { + fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW); + printk(KERN_NOTICE "ctcmpc: %s MPC GROUP " + "CHANNELS ACTIVE\n", dev->name); + } + } else if ((action == MPC_CHANNEL_REMOVE) && + (ch->in_mpcgroup == 1)) { + ch->in_mpcgroup = 0; + grp->num_channel_paths--; + grp->active_channels[direction]--; + + if (ch->xid_skb != NULL) + dev_kfree_skb_any(ch->xid_skb); + ch->xid_skb = NULL; + + if (grp->channels_terminating) + goto done; + + if (((grp->active_channels[READ] == 0) && + (grp->active_channels[WRITE] > 0)) + || ((grp->active_channels[WRITE] == 0) && + (grp->active_channels[READ] > 0))) + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + } + +done: + + if (do_debug) { + ctcm_pr_debug( + "ctcmpc: %s() %i Grp:%s ttl_chan_paths=%i " + "active_chans read=%i, write=%i\n", + __FUNCTION__, + action, + fsm_getstate_str(grp->fsm), + grp->num_channel_paths, + grp->active_channels[READ], + grp->active_channels[WRITE]); + + ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + } + return rc; + +} + +/** + * Unpack a just received skb and hand it over to + * upper layers. + * special MPC version of unpack_skb. + * + * ch The channel where this skb has been received. + * pskb The received skb. + */ +static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb) +{ + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct pdu *curr_pdu; + struct mpcg_info *mpcginfo; + struct th_header *header = NULL; + struct th_sweep *sweep = NULL; + int pdu_last_seen = 0; + __u32 new_len; + struct sk_buff *skb; + int skblen; + int sendrc = 0; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s() %s cp:%i ch:%s\n", + __FUNCTION__, dev->name, smp_processor_id(), ch->id); + + header = (struct th_header *)pskb->data; + if ((header->th_seg == 0) && + (header->th_ch_flag == 0) && + (header->th_blk_flag == 0) && + (header->th_seq_num == 0)) + /* nothing for us */ goto done; + + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s() th_header\n", __FUNCTION__); + ctcmpc_dumpit((char *)header, TH_HEADER_LENGTH); + ctcm_pr_debug("ctcmpc: %s() pskb len: %04x \n", + __FUNCTION__, pskb->len); + } + + pskb->dev = dev; + pskb->ip_summed = CHECKSUM_UNNECESSARY; + skb_pull(pskb, TH_HEADER_LENGTH); + + if (likely(header->th_ch_flag == TH_HAS_PDU)) { + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() came into th_has_pdu\n", + __FUNCTION__); + if ((fsm_getstate(grp->fsm) == MPCG_STATE_FLOWC) || + ((fsm_getstate(grp->fsm) == MPCG_STATE_READY) && + (header->th_seq_num != ch->th_seq_num + 1) && + (ch->th_seq_num != 0))) { + /* This is NOT the next segment * + * we are not the correct race winner * + * go away and let someone else win * + * BUT..this only applies if xid negot * + * is done * + */ + grp->out_of_sequence += 1; + __skb_push(pskb, TH_HEADER_LENGTH); + skb_queue_tail(&ch->io_queue, pskb); + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() th_seq_num " + "expect:%08x got:%08x\n", __FUNCTION__, + ch->th_seq_num + 1, header->th_seq_num); + + return; + } + grp->out_of_sequence = 0; + ch->th_seq_num = header->th_seq_num; + + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() FromVTAM_th_seq=%08x\n", + __FUNCTION__, ch->th_seq_num); + + if (unlikely(fsm_getstate(grp->fsm) != MPCG_STATE_READY)) + goto done; + pdu_last_seen = 0; + while ((pskb->len > 0) && !pdu_last_seen) { + curr_pdu = (struct pdu *)pskb->data; + if (do_debug_data) { + ctcm_pr_debug("ctcm: %s() pdu_header\n", + __FUNCTION__); + ctcmpc_dumpit((char *)pskb->data, + PDU_HEADER_LENGTH); + ctcm_pr_debug("ctcm: %s() pskb len: %04x \n", + __FUNCTION__, pskb->len); + } + skb_pull(pskb, PDU_HEADER_LENGTH); + + if (curr_pdu->pdu_flag & PDU_LAST) + pdu_last_seen = 1; + if (curr_pdu->pdu_flag & PDU_CNTL) + pskb->protocol = htons(ETH_P_SNAP); + else + pskb->protocol = htons(ETH_P_SNA_DIX); + + if ((pskb->len <= 0) || (pskb->len > ch->max_bufsize)) { + printk(KERN_INFO + "%s Illegal packet size %d " + "received " + "dropping\n", dev->name, + pskb->len); + priv->stats.rx_dropped++; + priv->stats.rx_length_errors++; + goto done; + } + skb_reset_mac_header(pskb); + new_len = curr_pdu->pdu_offset; + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s() new_len: %04x \n", + __FUNCTION__, new_len); + if ((new_len == 0) || (new_len > pskb->len)) { + /* should never happen */ + /* pskb len must be hosed...bail out */ + printk(KERN_INFO + "ctcmpc: %s(): invalid pdu" + " offset of %04x - data may be" + "lost\n", __FUNCTION__, new_len); + goto done; + } + skb = __dev_alloc_skb(new_len+4, GFP_ATOMIC); + + if (!skb) { + printk(KERN_INFO + "ctcm: %s Out of memory in " + "%s()- request-len:%04x \n", + dev->name, + __FUNCTION__, + new_len+4); + priv->stats.rx_dropped++; + fsm_event(grp->fsm, + MPCG_EVENT_INOP, dev); + goto done; + } + + memcpy(skb_put(skb, new_len), + pskb->data, new_len); + + skb_reset_mac_header(skb); + skb->dev = pskb->dev; + skb->protocol = pskb->protocol; + skb->ip_summed = CHECKSUM_UNNECESSARY; + *((__u32 *) skb_push(skb, 4)) = ch->pdu_seq; + ch->pdu_seq++; + + if (do_debug_data) + ctcm_pr_debug("%s: ToDCM_pdu_seq= %08x\n", + __FUNCTION__, ch->pdu_seq); + + ctcm_pr_debug("ctcm: %s() skb:%0lx " + "skb len: %d \n", __FUNCTION__, + (unsigned long)skb, skb->len); + if (do_debug_data) { + ctcm_pr_debug("ctcmpc: %s() up to 32 bytes" + " of pdu_data sent\n", + __FUNCTION__); + ctcmpc_dump32((char *)skb->data, skb->len); + } + + skblen = skb->len; + sendrc = netif_rx(skb); + priv->stats.rx_packets++; + priv->stats.rx_bytes += skblen; + skb_pull(pskb, new_len); /* point to next PDU */ + } + } else { + mpcginfo = (struct mpcg_info *) + kmalloc(sizeof(struct mpcg_info), gfp_type()); + if (mpcginfo == NULL) + goto done; + + mpcginfo->ch = ch; + mpcginfo->th = header; + mpcginfo->skb = pskb; + ctcm_pr_debug("ctcmpc: %s() Not PDU - may be control pkt\n", + __FUNCTION__); + /* it's a sweep? */ + sweep = (struct th_sweep *)pskb->data; + mpcginfo->sweep = sweep; + if (header->th_ch_flag == TH_SWEEP_REQ) + mpc_rcvd_sweep_req(mpcginfo); + else if (header->th_ch_flag == TH_SWEEP_RESP) + mpc_rcvd_sweep_resp(mpcginfo); + else if (header->th_blk_flag == TH_DATA_IS_XID) { + struct xid2 *thisxid = (struct xid2 *)pskb->data; + skb_pull(pskb, XID2_LENGTH); + mpcginfo->xid = thisxid; + fsm_event(grp->fsm, MPCG_EVENT_XID2, mpcginfo); + } else if (header->th_blk_flag == TH_DISCONTACT) + fsm_event(grp->fsm, MPCG_EVENT_DISCONC, mpcginfo); + else if (header->th_seq_num != 0) { + printk(KERN_INFO "%s unexpected packet" + " expected control pkt\n", dev->name); + priv->stats.rx_dropped++; + /* mpcginfo only used for non-data transfers */ + kfree(mpcginfo); + if (do_debug_data) + ctcmpc_dump_skb(pskb, -8); + } + } +done: + + dev_kfree_skb_any(pskb); + if (sendrc == NET_RX_DROP) { + printk(KERN_WARNING "%s %s() NETWORK BACKLOG EXCEEDED" + " - PACKET DROPPED\n", dev->name, __FUNCTION__); + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + } + + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n", + dev->name, __FUNCTION__, ch, ch->id); +} + +/** + * tasklet helper for mpc's skb unpacking. + * + * ch The channel to work on. + * Allow flow control back pressure to occur here. + * Throttling back channel can result in excessive + * channel inactivity and system deact of channel + */ +void ctcmpc_bh(unsigned long thischan) +{ + struct channel *ch = (struct channel *)thischan; + struct sk_buff *skb; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + if (do_debug) + ctcm_pr_debug("%s cp:%i enter: %s() %s\n", + dev->name, smp_processor_id(), __FUNCTION__, ch->id); + /* caller has requested driver to throttle back */ + while ((fsm_getstate(grp->fsm) != MPCG_STATE_FLOWC) && + (skb = skb_dequeue(&ch->io_queue))) { + ctcmpc_unpack_skb(ch, skb); + if (grp->out_of_sequence > 20) { + /* assume data loss has occurred if */ + /* missing seq_num for extended */ + /* period of time */ + grp->out_of_sequence = 0; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + break; + } + if (skb == skb_peek(&ch->io_queue)) + break; + } + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n", + dev->name, __FUNCTION__, ch, ch->id); + return; +} + +/* + * MPC Group Initializations + */ +struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv) +{ + struct mpc_group *grp; + + CTCM_DBF_TEXT(MPC_SETUP, 3, __FUNCTION__); + + grp = kzalloc(sizeof(struct mpc_group), GFP_KERNEL); + if (grp == NULL) + return NULL; + + grp->fsm = + init_fsm("mpcg", mpcg_state_names, mpcg_event_names, + MPCG_NR_STATES, MPCG_NR_EVENTS, mpcg_fsm, + mpcg_fsm_len, GFP_KERNEL); + if (grp->fsm == NULL) { + kfree(grp); + return NULL; + } + + fsm_newstate(grp->fsm, MPCG_STATE_RESET); + fsm_settimer(grp->fsm, &grp->timer); + + grp->xid_skb = + __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC | GFP_DMA); + if (grp->xid_skb == NULL) { + printk(KERN_INFO "Couldn't alloc MPCgroup xid_skb\n"); + kfree_fsm(grp->fsm); + kfree(grp); + return NULL; + } + /* base xid for all channels in group */ + grp->xid_skb_data = grp->xid_skb->data; + grp->xid_th = (struct th_header *)grp->xid_skb->data; + memcpy(skb_put(grp->xid_skb, TH_HEADER_LENGTH), + &thnorm, TH_HEADER_LENGTH); + + grp->xid = (struct xid2 *) skb_tail_pointer(grp->xid_skb); + memcpy(skb_put(grp->xid_skb, XID2_LENGTH), &init_xid, XID2_LENGTH); + grp->xid->xid2_adj_id = jiffies | 0xfff00000; + grp->xid->xid2_sender_id = jiffies; + + grp->xid_id = skb_tail_pointer(grp->xid_skb); + memcpy(skb_put(grp->xid_skb, 4), "VTAM", 4); + + grp->rcvd_xid_skb = + __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC|GFP_DMA); + if (grp->rcvd_xid_skb == NULL) { + printk(KERN_INFO "Couldn't alloc MPCgroup rcvd_xid_skb\n"); + kfree_fsm(grp->fsm); + dev_kfree_skb(grp->xid_skb); + kfree(grp); + return NULL; + } + grp->rcvd_xid_data = grp->rcvd_xid_skb->data; + grp->rcvd_xid_th = (struct th_header *)grp->rcvd_xid_skb->data; + memcpy(skb_put(grp->rcvd_xid_skb, TH_HEADER_LENGTH), + &thnorm, TH_HEADER_LENGTH); + grp->saved_xid2 = NULL; + priv->xid = grp->xid; + priv->mpcg = grp; + return grp; +} + +/* + * The MPC Group Station FSM + */ + +/* + * MPC Group Station FSM actions + * CTCM_PROTO_MPC only + */ + +/** + * NOP action for statemachines + */ +static void mpc_action_nop(fsm_instance *fi, int event, void *arg) +{ +} + +/* + * invoked when the device transitions to dev_stopped + * MPC will stop each individual channel if a single XID failure + * occurs, or will intitiate all channels be stopped if a GROUP + * level failure occurs. + */ +static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv; + struct mpc_group *grp; + int rc = 0; + struct channel *wch, *rch; + + if (dev == NULL) { + printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__); + return; + } + + ctcm_pr_debug("ctcmpc enter: %s %s()\n", dev->name, __FUNCTION__); + + priv = dev->priv; + grp = priv->mpcg; + grp->flow_off_called = 0; + + fsm_deltimer(&grp->timer); + + if (grp->channels_terminating) + goto done; + + grp->channels_terminating = 1; + + grp->saved_state = fsm_getstate(grp->fsm); + fsm_newstate(grp->fsm, MPCG_STATE_INOP); + if (grp->saved_state > MPCG_STATE_XID7INITF) + printk(KERN_NOTICE "%s:MPC GROUP INOPERATIVE\n", dev->name); + if ((grp->saved_state != MPCG_STATE_RESET) || + /* dealloc_channel has been called */ + ((grp->saved_state == MPCG_STATE_RESET) && + (grp->port_persist == 0))) + fsm_deltimer(&priv->restart_timer); + + wch = priv->channel[WRITE]; + rch = priv->channel[READ]; + + switch (grp->saved_state) { + case MPCG_STATE_RESET: + case MPCG_STATE_INOP: + case MPCG_STATE_XID2INITW: + case MPCG_STATE_XID0IOWAIT: + case MPCG_STATE_XID2INITX: + case MPCG_STATE_XID7INITW: + case MPCG_STATE_XID7INITX: + case MPCG_STATE_XID0IOWAIX: + case MPCG_STATE_XID7INITI: + case MPCG_STATE_XID7INITZ: + case MPCG_STATE_XID7INITF: + break; + case MPCG_STATE_FLOWC: + case MPCG_STATE_READY: + default: + tasklet_hi_schedule(&wch->ch_disc_tasklet); + } + + grp->xid2_tgnum = 0; + grp->group_max_buflen = 0; /*min of all received */ + grp->outstanding_xid2 = 0; + grp->outstanding_xid7 = 0; + grp->outstanding_xid7_p2 = 0; + grp->saved_xid2 = NULL; + grp->xidnogood = 0; + grp->changed_side = 0; + + grp->rcvd_xid_skb->data = grp->rcvd_xid_data; + skb_reset_tail_pointer(grp->rcvd_xid_skb); + grp->rcvd_xid_skb->len = 0; + grp->rcvd_xid_th = (struct th_header *)grp->rcvd_xid_skb->data; + memcpy(skb_put(grp->rcvd_xid_skb, TH_HEADER_LENGTH), &thnorm, + TH_HEADER_LENGTH); + + if (grp->send_qllc_disc == 1) { + grp->send_qllc_disc = 0; + rc = mpc_send_qllc_discontact(dev); + } + + /* DO NOT issue DEV_EVENT_STOP directly out of this code */ + /* This can result in INOP of VTAM PU due to halting of */ + /* outstanding IO which causes a sense to be returned */ + /* Only about 3 senses are allowed and then IOS/VTAM will*/ + /* ebcome unreachable without manual intervention */ + if ((grp->port_persist == 1) || (grp->alloc_called)) { + grp->alloc_called = 0; + fsm_deltimer(&priv->restart_timer); + fsm_addtimer(&priv->restart_timer, + 500, + DEV_EVENT_RESTART, + dev); + fsm_newstate(grp->fsm, MPCG_STATE_RESET); + if (grp->saved_state > MPCG_STATE_XID7INITF) + printk(KERN_NOTICE "%s:MPC GROUP RECOVERY SCHEDULED\n", + dev->name); + } else { + fsm_deltimer(&priv->restart_timer); + fsm_addtimer(&priv->restart_timer, 500, DEV_EVENT_STOP, dev); + fsm_newstate(grp->fsm, MPCG_STATE_RESET); + printk(KERN_NOTICE "%s:MPC GROUP RECOVERY NOT ATTEMPTED\n", + dev->name); + } + +done: + ctcm_pr_debug("ctcmpc exit:%s %s()\n", dev->name, __FUNCTION__); + return; +} + +/** + * Handle mpc group action timeout. + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + * + * fi An instance of an mpc_group fsm. + * event The event, just happened. + * arg Generic pointer, casted from net_device * upon call. + */ +static void mpc_action_timeout(fsm_instance *fi, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv; + struct mpc_group *grp; + struct channel *wch; + struct channel *rch; + + CTCM_DBF_TEXT(MPC_TRACE, 6, __FUNCTION__); + + if (dev == NULL) { + CTCM_DBF_TEXT_(MPC_ERROR, 4, "%s: dev=NULL\n", __FUNCTION__); + return; + } + + priv = dev->priv; + grp = priv->mpcg; + wch = priv->channel[WRITE]; + rch = priv->channel[READ]; + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID2INITW: + /* Unless there is outstanding IO on the */ + /* channel just return and wait for ATTN */ + /* interrupt to begin XID negotiations */ + if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && + (fsm_getstate(wch->fsm) == CH_XID0_PENDING)) + break; + default: + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + } + + CTCM_DBF_TEXT_(MPC_TRACE, 6, "%s: dev=%s exit", + __FUNCTION__, dev->name); + return; +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +void mpc_action_discontact(fsm_instance *fi, int event, void *arg) +{ + struct mpcg_info *mpcginfo = arg; + struct channel *ch = mpcginfo->ch; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + if (ch == NULL) { + printk(KERN_INFO "%s() ch=NULL\n", __FUNCTION__); + return; + } + if (ch->netdev == NULL) { + printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__); + return; + } + + ctcm_pr_debug("ctcmpc enter: %s %s()\n", dev->name, __FUNCTION__); + + grp->send_qllc_disc = 1; + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + + ctcm_pr_debug("ctcmpc exit: %s %s()\n", dev->name, __FUNCTION__); + return; +} + +/* + * MPC Group Station - not part of FSM + * CTCM_PROTO_MPC only + * called from add_channel in ctcm_main.c + */ +void mpc_action_send_discontact(unsigned long thischan) +{ + struct channel *ch; + struct net_device *dev; + struct ctcm_priv *priv; + struct mpc_group *grp; + int rc = 0; + unsigned long saveflags; + + ch = (struct channel *)thischan; + dev = ch->netdev; + priv = dev->priv; + grp = priv->mpcg; + + ctcm_pr_info("ctcmpc: %s cp:%i enter: %s() GrpState:%s ChState:%s\n", + dev->name, + smp_processor_id(), + __FUNCTION__, + fsm_getstate_str(grp->fsm), + fsm_getstate_str(ch->fsm)); + saveflags = 0; /* avoids compiler warning with + spin_unlock_irqrestore */ + + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + rc = ccw_device_start(ch->cdev, &ch->ccw[15], + (unsigned long)ch, 0xff, 0); + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + + if (rc != 0) { + ctcm_pr_info("ctcmpc: %s() ch:%s IO failed \n", + __FUNCTION__, + ch->id); + ctcm_ccw_check_rc(ch, rc, "send discontact"); + /* Not checking return code value here */ + /* Making best effort to notify partner*/ + /* that MPC Group is going down */ + } + + ctcm_pr_debug("ctcmpc exit: %s %s()\n", dev->name, __FUNCTION__); + return; +} + + +/* + * helper function of mpc FSM + * CTCM_PROTO_MPC only + * mpc_action_rcvd_xid7 +*/ +static int mpc_validate_xid(struct mpcg_info *mpcginfo) +{ + struct channel *ch = mpcginfo->ch; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + struct xid2 *xid = mpcginfo->xid; + int failed = 0; + int rc = 0; + __u64 our_id, their_id = 0; + int len; + + len = TH_HEADER_LENGTH + PDU_HEADER_LENGTH; + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + + if (mpcginfo->xid == NULL) { + printk(KERN_INFO "%s() xid=NULL\n", __FUNCTION__); + rc = 1; + goto done; + } + + ctcm_pr_debug("ctcmpc : %s xid received()\n", __FUNCTION__); + ctcmpc_dumpit((char *)mpcginfo->xid, XID2_LENGTH); + + /*the received direction should be the opposite of ours */ + if (((CHANNEL_DIRECTION(ch->flags) == READ) ? XID2_WRITE_SIDE : + XID2_READ_SIDE) != xid->xid2_dlc_type) { + failed = 1; + printk(KERN_INFO "ctcmpc:%s() XID REJECTED - READ-WRITE CH " + "Pairing Invalid \n", __FUNCTION__); + } + + if (xid->xid2_dlc_type == XID2_READ_SIDE) { + ctcm_pr_debug("ctcmpc: %s(): grpmaxbuf:%d xid2buflen:%d\n", + __FUNCTION__, grp->group_max_buflen, + xid->xid2_buf_len); + + if (grp->group_max_buflen == 0 || + grp->group_max_buflen > xid->xid2_buf_len - len) + grp->group_max_buflen = xid->xid2_buf_len - len; + } + + + if (grp->saved_xid2 == NULL) { + grp->saved_xid2 = + (struct xid2 *)skb_tail_pointer(grp->rcvd_xid_skb); + + memcpy(skb_put(grp->rcvd_xid_skb, + XID2_LENGTH), xid, XID2_LENGTH); + grp->rcvd_xid_skb->data = grp->rcvd_xid_data; + + skb_reset_tail_pointer(grp->rcvd_xid_skb); + grp->rcvd_xid_skb->len = 0; + + /* convert two 32 bit numbers into 1 64 bit for id compare */ + our_id = (__u64)priv->xid->xid2_adj_id; + our_id = our_id << 32; + our_id = our_id + priv->xid->xid2_sender_id; + their_id = (__u64)xid->xid2_adj_id; + their_id = their_id << 32; + their_id = their_id + xid->xid2_sender_id; + /* lower id assume the xside role */ + if (our_id < their_id) { + grp->roll = XSIDE; + ctcm_pr_debug("ctcmpc :%s() WE HAVE LOW ID-" + "TAKE XSIDE\n", __FUNCTION__); + } else { + grp->roll = YSIDE; + ctcm_pr_debug("ctcmpc :%s() WE HAVE HIGH ID-" + "TAKE YSIDE\n", __FUNCTION__); + } + + } else { + if (xid->xid2_flag4 != grp->saved_xid2->xid2_flag4) { + failed = 1; + printk(KERN_INFO "%s XID REJECTED - XID Flag Byte4\n", + __FUNCTION__); + } + if (xid->xid2_flag2 == 0x40) { + failed = 1; + printk(KERN_INFO "%s XID REJECTED - XID NOGOOD\n", + __FUNCTION__); + } + if (xid->xid2_adj_id != grp->saved_xid2->xid2_adj_id) { + failed = 1; + printk(KERN_INFO "%s XID REJECTED - " + "Adjacent Station ID Mismatch\n", + __FUNCTION__); + } + if (xid->xid2_sender_id != grp->saved_xid2->xid2_sender_id) { + failed = 1; + printk(KERN_INFO "%s XID REJECTED - " + "Sender Address Mismatch\n", __FUNCTION__); + + } + } + + if (failed) { + ctcm_pr_info("ctcmpc : %s() failed\n", __FUNCTION__); + priv->xid->xid2_flag2 = 0x40; + grp->saved_xid2->xid2_flag2 = 0x40; + rc = 1; + } + +done: + + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return rc; +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side) +{ + struct channel *ch = arg; + struct ctcm_priv *priv; + struct mpc_group *grp = NULL; + struct net_device *dev = NULL; + int rc = 0; + int gotlock = 0; + unsigned long saveflags = 0; /* avoids compiler warning with + spin_unlock_irqrestore */ + + if (ch == NULL) { + printk(KERN_INFO "%s ch=NULL\n", __FUNCTION__); + goto done; + } + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + + dev = ch->netdev; + if (dev == NULL) { + printk(KERN_INFO "%s dev=NULL\n", __FUNCTION__); + goto done; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s priv=NULL\n", __FUNCTION__); + goto done; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "%s grp=NULL\n", __FUNCTION__); + goto done; + } + + if (ctcm_checkalloc_buffer(ch)) + goto done; + + /* skb data-buffer referencing: */ + + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + /* result of the previous 3 statements is NOT always + * already set after ctcm_checkalloc_buffer + * because of possible reuse of the trans_skb + */ + memset(ch->trans_skb->data, 0, 16); + ch->rcvd_xid_th = (struct th_header *)ch->trans_skb_data; + /* check is main purpose here: */ + skb_put(ch->trans_skb, TH_HEADER_LENGTH); + ch->rcvd_xid = (struct xid2 *)skb_tail_pointer(ch->trans_skb); + /* check is main purpose here: */ + skb_put(ch->trans_skb, XID2_LENGTH); + ch->rcvd_xid_id = skb_tail_pointer(ch->trans_skb); + /* cleanup back to startpoint */ + ch->trans_skb->data = ch->trans_skb_data; + skb_reset_tail_pointer(ch->trans_skb); + ch->trans_skb->len = 0; + + /* non-checking rewrite of above skb data-buffer referencing: */ + /* + memset(ch->trans_skb->data, 0, 16); + ch->rcvd_xid_th = (struct th_header *)ch->trans_skb_data; + ch->rcvd_xid = (struct xid2 *)(ch->trans_skb_data + TH_HEADER_LENGTH); + ch->rcvd_xid_id = ch->trans_skb_data + TH_HEADER_LENGTH + XID2_LENGTH; + */ + + ch->ccw[8].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[8].count = 0; + ch->ccw[8].cda = 0x00; + + if (side == XSIDE) { + /* mpc_action_xside_xid */ + if (ch->xid_th == NULL) { + printk(KERN_INFO "%s ch->xid_th=NULL\n", __FUNCTION__); + goto done; + } + ch->ccw[9].cmd_code = CCW_CMD_WRITE; + ch->ccw[9].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[9].count = TH_HEADER_LENGTH; + ch->ccw[9].cda = virt_to_phys(ch->xid_th); + + if (ch->xid == NULL) { + printk(KERN_INFO "%s ch->xid=NULL\n", __FUNCTION__); + goto done; + } + + ch->ccw[10].cmd_code = CCW_CMD_WRITE; + ch->ccw[10].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[10].count = XID2_LENGTH; + ch->ccw[10].cda = virt_to_phys(ch->xid); + + ch->ccw[11].cmd_code = CCW_CMD_READ; + ch->ccw[11].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[11].count = TH_HEADER_LENGTH; + ch->ccw[11].cda = virt_to_phys(ch->rcvd_xid_th); + + ch->ccw[12].cmd_code = CCW_CMD_READ; + ch->ccw[12].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[12].count = XID2_LENGTH; + ch->ccw[12].cda = virt_to_phys(ch->rcvd_xid); + + ch->ccw[13].cmd_code = CCW_CMD_READ; + ch->ccw[13].cda = virt_to_phys(ch->rcvd_xid_id); + + } else { /* side == YSIDE : mpc_action_yside_xid */ + ch->ccw[9].cmd_code = CCW_CMD_READ; + ch->ccw[9].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[9].count = TH_HEADER_LENGTH; + ch->ccw[9].cda = virt_to_phys(ch->rcvd_xid_th); + + ch->ccw[10].cmd_code = CCW_CMD_READ; + ch->ccw[10].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[10].count = XID2_LENGTH; + ch->ccw[10].cda = virt_to_phys(ch->rcvd_xid); + + if (ch->xid_th == NULL) { + printk(KERN_INFO "%s ch->xid_th=NULL\n", __FUNCTION__); + goto done; + } + ch->ccw[11].cmd_code = CCW_CMD_WRITE; + ch->ccw[11].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[11].count = TH_HEADER_LENGTH; + ch->ccw[11].cda = virt_to_phys(ch->xid_th); + + if (ch->xid == NULL) { + printk(KERN_INFO "%s ch->xid=NULL\n", __FUNCTION__); + goto done; + } + ch->ccw[12].cmd_code = CCW_CMD_WRITE; + ch->ccw[12].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[12].count = XID2_LENGTH; + ch->ccw[12].cda = virt_to_phys(ch->xid); + + if (ch->xid_id == NULL) { + printk(KERN_INFO "%s ch->xid_id=NULL\n", __FUNCTION__); + goto done; + } + ch->ccw[13].cmd_code = CCW_CMD_WRITE; + ch->ccw[13].cda = virt_to_phys(ch->xid_id); + + } + ch->ccw[13].flags = CCW_FLAG_SLI | CCW_FLAG_CC; + ch->ccw[13].count = 4; + + ch->ccw[14].cmd_code = CCW_CMD_NOOP; + ch->ccw[14].flags = CCW_FLAG_SLI; + ch->ccw[14].count = 0; + ch->ccw[14].cda = 0; + + if (do_debug_ccw) + ctcmpc_dumpit((char *)&ch->ccw[8], sizeof(struct ccw1) * 7); + + ctcmpc_dumpit((char *)ch->xid_th, TH_HEADER_LENGTH); + ctcmpc_dumpit((char *)ch->xid, XID2_LENGTH); + ctcmpc_dumpit((char *)ch->xid_id, 4); + if (!in_irq()) { + /* Such conditional locking is a known problem for + * sparse because its static undeterministic. + * Warnings should be ignored here. */ + spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); + gotlock = 1; + } + + fsm_addtimer(&ch->timer, 5000 , CTC_EVENT_TIMER, ch); + rc = ccw_device_start(ch->cdev, &ch->ccw[8], + (unsigned long)ch, 0xff, 0); + + if (gotlock) /* see remark above about conditional locking */ + spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); + + if (rc != 0) { + ctcm_pr_info("ctcmpc: %s() ch:%s IO failed \n", + __FUNCTION__, ch->id); + ctcm_ccw_check_rc(ch, rc, + (side == XSIDE) ? "x-side XID" : "y-side XID"); + } + +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + return; + +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_xside_xid(fsm_instance *fsm, int event, void *arg) +{ + mpc_action_side_xid(fsm, arg, XSIDE); +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_yside_xid(fsm_instance *fsm, int event, void *arg) +{ + mpc_action_side_xid(fsm, arg, YSIDE); +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg) +{ + struct channel *ch = arg; + struct ctcm_priv *priv; + struct mpc_group *grp = NULL; + struct net_device *dev = NULL; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + + if (ch == NULL) { + printk(KERN_WARNING "%s ch=NULL\n", __FUNCTION__); + goto done; + } + + dev = ch->netdev; + if (dev == NULL) { + printk(KERN_WARNING "%s dev=NULL\n", __FUNCTION__); + goto done; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_WARNING "%s priv=NULL\n", __FUNCTION__); + goto done; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_WARNING "%s grp=NULL\n", __FUNCTION__); + goto done; + } + + if (ch->xid == NULL) { + printk(KERN_WARNING "%s ch-xid=NULL\n", __FUNCTION__); + goto done; + } + + fsm_newstate(ch->fsm, CH_XID0_INPROGRESS); + + ch->xid->xid2_option = XID2_0; + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID2INITW: + case MPCG_STATE_XID2INITX: + ch->ccw[8].cmd_code = CCW_CMD_SENSE_CMD; + break; + case MPCG_STATE_XID0IOWAIT: + case MPCG_STATE_XID0IOWAIX: + ch->ccw[8].cmd_code = CCW_CMD_WRITE_CTL; + break; + } + + fsm_event(grp->fsm, MPCG_EVENT_DOIO, ch); + +done: + if (do_debug) + ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n", + __FUNCTION__, ch, ch->id); + return; + +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only +*/ +static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg) +{ + struct net_device *dev = arg; + struct ctcm_priv *priv = NULL; + struct mpc_group *grp = NULL; + int direction; + int rc = 0; + int send = 0; + + ctcm_pr_debug("ctcmpc enter: %s() \n", __FUNCTION__); + + if (dev == NULL) { + printk(KERN_INFO "%s dev=NULL \n", __FUNCTION__); + rc = 1; + goto done; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s priv=NULL \n", __FUNCTION__); + rc = 1; + goto done; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "%s grp=NULL \n", __FUNCTION__); + rc = 1; + goto done; + } + + for (direction = READ; direction <= WRITE; direction++) { + struct channel *ch = priv->channel[direction]; + struct xid2 *thisxid = ch->xid; + ch->xid_skb->data = ch->xid_skb_data; + skb_reset_tail_pointer(ch->xid_skb); + ch->xid_skb->len = 0; + thisxid->xid2_option = XID2_7; + send = 0; + + /* xid7 phase 1 */ + if (grp->outstanding_xid7_p2 > 0) { + if (grp->roll == YSIDE) { + if (fsm_getstate(ch->fsm) == CH_XID7_PENDING1) { + fsm_newstate(ch->fsm, CH_XID7_PENDING2); + ch->ccw[8].cmd_code = CCW_CMD_SENSE_CMD; + memcpy(skb_put(ch->xid_skb, + TH_HEADER_LENGTH), + &thdummy, TH_HEADER_LENGTH); + send = 1; + } + } else if (fsm_getstate(ch->fsm) < CH_XID7_PENDING2) { + fsm_newstate(ch->fsm, CH_XID7_PENDING2); + ch->ccw[8].cmd_code = CCW_CMD_WRITE_CTL; + memcpy(skb_put(ch->xid_skb, + TH_HEADER_LENGTH), + &thnorm, TH_HEADER_LENGTH); + send = 1; + } + } else { + /* xid7 phase 2 */ + if (grp->roll == YSIDE) { + if (fsm_getstate(ch->fsm) < CH_XID7_PENDING4) { + fsm_newstate(ch->fsm, CH_XID7_PENDING4); + memcpy(skb_put(ch->xid_skb, + TH_HEADER_LENGTH), + &thnorm, TH_HEADER_LENGTH); + ch->ccw[8].cmd_code = CCW_CMD_WRITE_CTL; + send = 1; + } + } else if (fsm_getstate(ch->fsm) == CH_XID7_PENDING3) { + fsm_newstate(ch->fsm, CH_XID7_PENDING4); + ch->ccw[8].cmd_code = CCW_CMD_SENSE_CMD; + memcpy(skb_put(ch->xid_skb, TH_HEADER_LENGTH), + &thdummy, TH_HEADER_LENGTH); + send = 1; + } + } + + if (send) + fsm_event(grp->fsm, MPCG_EVENT_DOIO, ch); + } + +done: + + if (rc != 0) + fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); + + return; +} + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg) +{ + + struct mpcg_info *mpcginfo = arg; + struct channel *ch = mpcginfo->ch; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv; + struct mpc_group *grp; + + if (do_debug) + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + + priv = dev->priv; + grp = priv->mpcg; + + ctcm_pr_debug("ctcmpc in:%s() %s xid2:%i xid7:%i xidt_p2:%i \n", + __FUNCTION__, ch->id, + grp->outstanding_xid2, + grp->outstanding_xid7, + grp->outstanding_xid7_p2); + + if (fsm_getstate(ch->fsm) < CH_XID7_PENDING) + fsm_newstate(ch->fsm, CH_XID7_PENDING); + + grp->outstanding_xid2--; + grp->outstanding_xid7++; + grp->outstanding_xid7_p2++; + + /* must change state before validating xid to */ + /* properly handle interim interrupts received*/ + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID2INITW: + fsm_newstate(grp->fsm, MPCG_STATE_XID2INITX); + mpc_validate_xid(mpcginfo); + break; + case MPCG_STATE_XID0IOWAIT: + fsm_newstate(grp->fsm, MPCG_STATE_XID0IOWAIX); + mpc_validate_xid(mpcginfo); + break; + case MPCG_STATE_XID2INITX: + if (grp->outstanding_xid2 == 0) { + fsm_newstate(grp->fsm, MPCG_STATE_XID7INITW); + mpc_validate_xid(mpcginfo); + fsm_event(grp->fsm, MPCG_EVENT_XID2DONE, dev); + } + break; + case MPCG_STATE_XID0IOWAIX: + if (grp->outstanding_xid2 == 0) { + fsm_newstate(grp->fsm, MPCG_STATE_XID7INITI); + mpc_validate_xid(mpcginfo); + fsm_event(grp->fsm, MPCG_EVENT_XID2DONE, dev); + } + break; + } + kfree(mpcginfo); + + if (do_debug) { + ctcm_pr_debug("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n", + __FUNCTION__, ch->id, + grp->outstanding_xid2, + grp->outstanding_xid7, + grp->outstanding_xid7_p2); + ctcm_pr_debug("ctcmpc:%s() %s grpstate: %s chanstate: %s \n", + __FUNCTION__, ch->id, + fsm_getstate_str(grp->fsm), + fsm_getstate_str(ch->fsm)); + } + return; + +} + + +/* + * MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg) +{ + struct mpcg_info *mpcginfo = arg; + struct channel *ch = mpcginfo->ch; + struct net_device *dev = ch->netdev; + struct ctcm_priv *priv = dev->priv; + struct mpc_group *grp = priv->mpcg; + + if (do_debug) { + ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + + ctcm_pr_debug("ctcmpc: outstanding_xid7: %i, " + " outstanding_xid7_p2: %i\n", + grp->outstanding_xid7, + grp->outstanding_xid7_p2); + } + + grp->outstanding_xid7--; + ch->xid_skb->data = ch->xid_skb_data; + skb_reset_tail_pointer(ch->xid_skb); + ch->xid_skb->len = 0; + + switch (fsm_getstate(grp->fsm)) { + case MPCG_STATE_XID7INITI: + fsm_newstate(grp->fsm, MPCG_STATE_XID7INITZ); + mpc_validate_xid(mpcginfo); + break; + case MPCG_STATE_XID7INITW: + fsm_newstate(grp->fsm, MPCG_STATE_XID7INITX); + mpc_validate_xid(mpcginfo); + break; + case MPCG_STATE_XID7INITZ: + case MPCG_STATE_XID7INITX: + if (grp->outstanding_xid7 == 0) { + if (grp->outstanding_xid7_p2 > 0) { + grp->outstanding_xid7 = + grp->outstanding_xid7_p2; + grp->outstanding_xid7_p2 = 0; + } else + fsm_newstate(grp->fsm, MPCG_STATE_XID7INITF); + + mpc_validate_xid(mpcginfo); + fsm_event(grp->fsm, MPCG_EVENT_XID7DONE, dev); + break; + } + mpc_validate_xid(mpcginfo); + break; + } + + kfree(mpcginfo); + + if (do_debug) + ctcm_pr_debug("ctcmpc exit: %s(): cp=%i ch=0x%p id=%s\n", + __FUNCTION__, smp_processor_id(), ch, ch->id); + return; + +} + +/* + * mpc_action helper of an MPC Group Station FSM action + * CTCM_PROTO_MPC only + */ +static int mpc_send_qllc_discontact(struct net_device *dev) +{ + int rc = 0; + __u32 new_len = 0; + struct sk_buff *skb; + struct qllc *qllcptr; + struct ctcm_priv *priv; + struct mpc_group *grp; + + ctcm_pr_debug("ctcmpc enter: %s()\n", __FUNCTION__); + + if (dev == NULL) { + printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__); + rc = 1; + goto done; + } + + priv = dev->priv; + if (priv == NULL) { + printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__); + rc = 1; + goto done; + } + + grp = priv->mpcg; + if (grp == NULL) { + printk(KERN_INFO "%s() grp=NULL\n", __FUNCTION__); + rc = 1; + goto done; + } + ctcm_pr_info("ctcmpc: %s() GROUP STATE: %s\n", __FUNCTION__, + mpcg_state_names[grp->saved_state]); + + switch (grp->saved_state) { + /* + * establish conn callback function is + * preferred method to report failure + */ + case MPCG_STATE_XID0IOWAIT: + case MPCG_STATE_XID0IOWAIX: + case MPCG_STATE_XID7INITI: + case MPCG_STATE_XID7INITZ: + case MPCG_STATE_XID2INITW: + case MPCG_STATE_XID2INITX: + case MPCG_STATE_XID7INITW: + case MPCG_STATE_XID7INITX: + if (grp->estconnfunc) { + grp->estconnfunc(grp->port_num, -1, 0); + grp->estconnfunc = NULL; + break; + } + case MPCG_STATE_FLOWC: + case MPCG_STATE_READY: + grp->send_qllc_disc = 2; + new_len = sizeof(struct qllc); + qllcptr = kzalloc(new_len, gfp_type() | GFP_DMA); + if (qllcptr == NULL) { + printk(KERN_INFO + "ctcmpc: Out of memory in %s()\n", + dev->name); + rc = 1; + goto done; + } + + qllcptr->qllc_address = 0xcc; + qllcptr->qllc_commands = 0x03; + + skb = __dev_alloc_skb(new_len, GFP_ATOMIC); + + if (skb == NULL) { + printk(KERN_INFO "%s Out of memory in mpc_send_qllc\n", + dev->name); + priv->stats.rx_dropped++; + rc = 1; + kfree(qllcptr); + goto done; + } + + memcpy(skb_put(skb, new_len), qllcptr, new_len); + kfree(qllcptr); + + if (skb_headroom(skb) < 4) { + printk(KERN_INFO "ctcmpc: %s() Unable to" + " build discontact for %s\n", + __FUNCTION__, dev->name); + rc = 1; + dev_kfree_skb_any(skb); + goto done; + } + + *((__u32 *)skb_push(skb, 4)) = priv->channel[READ]->pdu_seq; + priv->channel[READ]->pdu_seq++; + if (do_debug_data) + ctcm_pr_debug("ctcmpc: %s ToDCM_pdu_seq= %08x\n", + __FUNCTION__, priv->channel[READ]->pdu_seq); + + /* receipt of CC03 resets anticipated sequence number on + receiving side */ + priv->channel[READ]->pdu_seq = 0x00; + skb_reset_mac_header(skb); + skb->dev = dev; + skb->protocol = htons(ETH_P_SNAP); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + ctcmpc_dumpit((char *)skb->data, (sizeof(struct qllc) + 4)); + + netif_rx(skb); + break; + default: + break; + + } + +done: + ctcm_pr_debug("ctcmpc exit: %s()\n", __FUNCTION__); + return rc; +} +/* --- This is the END my friend --- */ + diff --git a/drivers/s390/net/ctcm_mpc.h b/drivers/s390/net/ctcm_mpc.h new file mode 100644 index 0000000..f996860 --- /dev/null +++ b/drivers/s390/net/ctcm_mpc.h @@ -0,0 +1,239 @@ +/* + * drivers/s390/net/ctcm_mpc.h + * + * Copyright IBM Corp. 2007 + * Authors: Peter Tiedemann (ptiedem@de.ibm.com) + * + * MPC additions: + * Belinda Thompson (belindat@us.ibm.com) + * Andy Richter (richtera@us.ibm.com) + */ + +#ifndef _CTC_MPC_H_ +#define _CTC_MPC_H_ + +#include +#include "fsm.h" + +/* + * MPC external interface + * Note that ctc_mpc_xyz are called with a lock on ................ + */ + +/* port_number is the mpc device 0, 1, 2 etc mpc2 is port_number 2 */ + +/* passive open Just wait for XID2 exchange */ +extern int ctc_mpc_alloc_channel(int port, + void (*callback)(int port_num, int max_write_size)); +/* active open Alloc then send XID2 */ +extern void ctc_mpc_establish_connectivity(int port, + void (*callback)(int port_num, int rc, int max_write_size)); + +extern void ctc_mpc_dealloc_ch(int port); +extern void ctc_mpc_flow_control(int port, int flowc); + +/* + * other MPC Group prototypes and structures + */ + +#define ETH_P_SNA_DIX 0x80D5 + +/* + * Declaration of an XID2 + * + */ +#define ALLZEROS 0x0000000000000000 + +#define XID_FM2 0x20 +#define XID2_0 0x00 +#define XID2_7 0x07 +#define XID2_WRITE_SIDE 0x04 +#define XID2_READ_SIDE 0x05 + +struct xid2 { + __u8 xid2_type_id; + __u8 xid2_len; + __u32 xid2_adj_id; + __u8 xid2_rlen; + __u8 xid2_resv1; + __u8 xid2_flag1; + __u8 xid2_fmtt; + __u8 xid2_flag4; + __u16 xid2_resv2; + __u8 xid2_tgnum; + __u32 xid2_sender_id; + __u8 xid2_flag2; + __u8 xid2_option; + char xid2_resv3[8]; + __u16 xid2_resv4; + __u8 xid2_dlc_type; + __u16 xid2_resv5; + __u8 xid2_mpc_flag; + __u8 xid2_resv6; + __u16 xid2_buf_len; + char xid2_buffer[255 - (13 * sizeof(__u8) + + 2 * sizeof(__u32) + + 4 * sizeof(__u16) + + 8 * sizeof(char))]; +} __attribute__ ((packed)); + +#define XID2_LENGTH (sizeof(struct xid2)) + +struct th_header { + __u8 th_seg; + __u8 th_ch_flag; +#define TH_HAS_PDU 0xf0 +#define TH_IS_XID 0x01 +#define TH_SWEEP_REQ 0xfe +#define TH_SWEEP_RESP 0xff + __u8 th_blk_flag; +#define TH_DATA_IS_XID 0x80 +#define TH_RETRY 0x40 +#define TH_DISCONTACT 0xc0 +#define TH_SEG_BLK 0x20 +#define TH_LAST_SEG 0x10 +#define TH_PDU_PART 0x08 + __u8 th_is_xid; /* is 0x01 if this is XID */ + __u32 th_seq_num; +} __attribute__ ((packed)); + +struct th_addon { + __u32 th_last_seq; + __u32 th_resvd; +} __attribute__ ((packed)); + +struct th_sweep { + struct th_header th; + struct th_addon sw; +} __attribute__ ((packed)); + +#define TH_HEADER_LENGTH (sizeof(struct th_header)) +#define TH_SWEEP_LENGTH (sizeof(struct th_sweep)) + +#define PDU_LAST 0x80 +#define PDU_CNTL 0x40 +#define PDU_FIRST 0x20 + +struct pdu { + __u32 pdu_offset; + __u8 pdu_flag; + __u8 pdu_proto; /* 0x01 is APPN SNA */ + __u16 pdu_seq; +} __attribute__ ((packed)); + +#define PDU_HEADER_LENGTH (sizeof(struct pdu)) + +struct qllc { + __u8 qllc_address; +#define QLLC_REQ 0xFF +#define QLLC_RESP 0x00 + __u8 qllc_commands; +#define QLLC_DISCONNECT 0x53 +#define QLLC_UNSEQACK 0x73 +#define QLLC_SETMODE 0x93 +#define QLLC_EXCHID 0xBF +} __attribute__ ((packed)); + + +/* + * Definition of one MPC group + */ + +#define MAX_MPCGCHAN 10 +#define MPC_XID_TIMEOUT_VALUE 10000 +#define MPC_CHANNEL_ADD 0 +#define MPC_CHANNEL_REMOVE 1 +#define MPC_CHANNEL_ATTN 2 +#define XSIDE 1 +#define YSIDE 0 + +struct mpcg_info { + struct sk_buff *skb; + struct channel *ch; + struct xid2 *xid; + struct th_sweep *sweep; + struct th_header *th; +}; + +struct mpc_group { + struct tasklet_struct mpc_tasklet; + struct tasklet_struct mpc_tasklet2; + int changed_side; + int saved_state; + int channels_terminating; + int out_of_sequence; + int flow_off_called; + int port_num; + int port_persist; + int alloc_called; + __u32 xid2_adj_id; + __u8 xid2_tgnum; + __u32 xid2_sender_id; + int num_channel_paths; + int active_channels[2]; + __u16 group_max_buflen; + int outstanding_xid2; + int outstanding_xid7; + int outstanding_xid7_p2; + int sweep_req_pend_num; + int sweep_rsp_pend_num; + struct sk_buff *xid_skb; + char *xid_skb_data; + struct th_header *xid_th; + struct xid2 *xid; + char *xid_id; + struct th_header *rcvd_xid_th; + struct sk_buff *rcvd_xid_skb; + char *rcvd_xid_data; + __u8 in_sweep; + __u8 roll; + struct xid2 *saved_xid2; + void (*allochanfunc)(int, int); + int allocchan_callback_retries; + void (*estconnfunc)(int, int, int); + int estconn_callback_retries; + int estconn_called; + int xidnogood; + int send_qllc_disc; + fsm_timer timer; + fsm_instance *fsm; /* group xid fsm */ +}; + +#ifdef DEBUGDATA +void ctcmpc_dumpit(char *buf, int len); +#else +static inline void ctcmpc_dumpit(char *buf, int len) +{ +} +#endif + +#ifdef DEBUGDATA +/* + * Dump header and first 16 bytes of an sk_buff for debugging purposes. + * + * skb The struct sk_buff to dump. + * offset Offset relative to skb-data, where to start the dump. + */ +void ctcmpc_dump_skb(struct sk_buff *skb, int offset); +#else +static inline void ctcmpc_dump_skb(struct sk_buff *skb, int offset) +{} +#endif + +static inline void ctcmpc_dump32(char *buf, int len) +{ + if (len < 32) + ctcmpc_dumpit(buf, len); + else + ctcmpc_dumpit(buf, 32); +} + +int ctcmpc_open(struct net_device *); +void ctcm_ccw_check_rc(struct channel *, int, char *); +void mpc_group_ready(unsigned long adev); +int mpc_channel_action(struct channel *ch, int direction, int action); +void mpc_action_send_discontact(unsigned long thischan); +void mpc_action_discontact(fsm_instance *fi, int event, void *arg); +void ctcmpc_bh(unsigned long thischan); +#endif +/* --- This is the END my friend --- */ diff --git a/drivers/s390/net/ctcm_sysfs.c b/drivers/s390/net/ctcm_sysfs.c new file mode 100644 index 0000000..bb2d137 --- /dev/null +++ b/drivers/s390/net/ctcm_sysfs.c @@ -0,0 +1,210 @@ +/* + * drivers/s390/net/ctcm_sysfs.c + * + * Copyright IBM Corp. 2007, 2007 + * Authors: Peter Tiedemann (ptiedem@de.ibm.com) + * + */ + +#undef DEBUG +#undef DEBUGDATA +#undef DEBUGCCW + +#include +#include "ctcm_main.h" + +/* + * sysfs attributes + */ + +static ssize_t ctcm_buffer_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctcm_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + return sprintf(buf, "%d\n", priv->buffer_size); +} + +static ssize_t ctcm_buffer_write(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct net_device *ndev; + int bs1; + struct ctcm_priv *priv = dev_get_drvdata(dev); + + if (!(priv && priv->channel[READ] && + (ndev = priv->channel[READ]->netdev))) { + CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, "bfnondev"); + return -ENODEV; + } + + sscanf(buf, "%u", &bs1); + if (bs1 > CTCM_BUFSIZE_LIMIT) + goto einval; + if (bs1 < (576 + LL_HEADER_LENGTH + 2)) + goto einval; + priv->buffer_size = bs1; /* just to overwrite the default */ + + if ((ndev->flags & IFF_RUNNING) && + (bs1 < (ndev->mtu + LL_HEADER_LENGTH + 2))) + goto einval; + + priv->channel[READ]->max_bufsize = bs1; + priv->channel[WRITE]->max_bufsize = bs1; + if (!(ndev->flags & IFF_RUNNING)) + ndev->mtu = bs1 - LL_HEADER_LENGTH - 2; + priv->channel[READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; + priv->channel[WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; + + CTCM_DBF_DEV(SETUP, ndev, buf); + return count; + +einval: + CTCM_DBF_DEV(SETUP, ndev, "buff_err"); + return -EINVAL; +} + +static void ctcm_print_statistics(struct ctcm_priv *priv) +{ + char *sbuf; + char *p; + + if (!priv) + return; + sbuf = kmalloc(2048, GFP_KERNEL); + if (sbuf == NULL) + return; + p = sbuf; + + p += sprintf(p, " Device FSM state: %s\n", + fsm_getstate_str(priv->fsm)); + p += sprintf(p, " RX channel FSM state: %s\n", + fsm_getstate_str(priv->channel[READ]->fsm)); + p += sprintf(p, " TX channel FSM state: %s\n", + fsm_getstate_str(priv->channel[WRITE]->fsm)); + p += sprintf(p, " Max. TX buffer used: %ld\n", + priv->channel[WRITE]->prof.maxmulti); + p += sprintf(p, " Max. chained SKBs: %ld\n", + priv->channel[WRITE]->prof.maxcqueue); + p += sprintf(p, " TX single write ops: %ld\n", + priv->channel[WRITE]->prof.doios_single); + p += sprintf(p, " TX multi write ops: %ld\n", + priv->channel[WRITE]->prof.doios_multi); + p += sprintf(p, " Netto bytes written: %ld\n", + priv->channel[WRITE]->prof.txlen); + p += sprintf(p, " Max. TX IO-time: %ld\n", + priv->channel[WRITE]->prof.tx_time); + + printk(KERN_INFO "Statistics for %s:\n%s", + priv->channel[WRITE]->netdev->name, sbuf); + kfree(sbuf); + return; +} + +static ssize_t stats_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctcm_priv *priv = dev_get_drvdata(dev); + if (!priv) + return -ENODEV; + ctcm_print_statistics(priv); + return sprintf(buf, "0\n"); +} + +static ssize_t stats_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctcm_priv *priv = dev_get_drvdata(dev); + if (!priv) + return -ENODEV; + /* Reset statistics */ + memset(&priv->channel[WRITE]->prof, 0, + sizeof(priv->channel[WRITE]->prof)); + return count; +} + +static ssize_t ctcm_proto_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctcm_priv *priv = dev_get_drvdata(dev); + if (!priv) + return -ENODEV; + + return sprintf(buf, "%d\n", priv->protocol); +} + +static ssize_t ctcm_proto_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value; + struct ctcm_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + sscanf(buf, "%u", &value); + if (!((value == CTCM_PROTO_S390) || + (value == CTCM_PROTO_LINUX) || + (value == CTCM_PROTO_MPC) || + (value == CTCM_PROTO_OS390))) + return -EINVAL; + priv->protocol = value; + CTCM_DBF_DEV(SETUP, dev, buf); + + return count; +} + +static ssize_t ctcm_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ccwgroup_device *cgdev; + + cgdev = to_ccwgroupdev(dev); + if (!cgdev) + return -ENODEV; + + return sprintf(buf, "%s\n", + cu3088_type[cgdev->cdev[0]->id.driver_info]); +} + +static DEVICE_ATTR(buffer, 0644, ctcm_buffer_show, ctcm_buffer_write); +static DEVICE_ATTR(protocol, 0644, ctcm_proto_show, ctcm_proto_store); +static DEVICE_ATTR(type, 0444, ctcm_type_show, NULL); +static DEVICE_ATTR(stats, 0644, stats_show, stats_write); + +static struct attribute *ctcm_attr[] = { + &dev_attr_protocol.attr, + &dev_attr_type.attr, + &dev_attr_buffer.attr, + NULL, +}; + +static struct attribute_group ctcm_attr_group = { + .attrs = ctcm_attr, +}; + +int ctcm_add_attributes(struct device *dev) +{ + int rc; + + rc = device_create_file(dev, &dev_attr_stats); + + return rc; +} + +void ctcm_remove_attributes(struct device *dev) +{ + device_remove_file(dev, &dev_attr_stats); +} + +int ctcm_add_files(struct device *dev) +{ + return sysfs_create_group(&dev->kobj, &ctcm_attr_group); +} + +void ctcm_remove_files(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &ctcm_attr_group); +} + -- cgit v1.1 From 04885948b101c44cbec9dacfb49b28290a899012 Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Fri, 8 Feb 2008 00:03:50 +0100 Subject: ctc: removal of the old ctc driver ctc driver is replaced by a new ctcm driver. The ctcm driver supports the channel-to-channel connections of the old ctc driver plus an additional MPC protocol to provide SNA connectivity. This patch removes the functions of the old ctc driver. Signed-off-by: Peter Tiedemann Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/ctcdbug.c | 80 -- drivers/s390/net/ctcdbug.h | 125 -- drivers/s390/net/ctcmain.c | 3062 -------------------------------------------- drivers/s390/net/ctcmain.h | 270 ---- 4 files changed, 3537 deletions(-) delete mode 100644 drivers/s390/net/ctcdbug.c delete mode 100644 drivers/s390/net/ctcdbug.h delete mode 100644 drivers/s390/net/ctcmain.c delete mode 100644 drivers/s390/net/ctcmain.h (limited to 'drivers') diff --git a/drivers/s390/net/ctcdbug.c b/drivers/s390/net/ctcdbug.c deleted file mode 100644 index e6e72de..0000000 --- a/drivers/s390/net/ctcdbug.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * linux/drivers/s390/net/ctcdbug.c - * - * CTC / ESCON network driver - s390 dbf exploit. - * - * Copyright 2000,2003 IBM Corporation - * - * Author(s): Original Code written by - * Peter Tiedemann (ptiedem@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "ctcdbug.h" - -/** - * Debug Facility Stuff - */ -debug_info_t *ctc_dbf_setup = NULL; -debug_info_t *ctc_dbf_data = NULL; -debug_info_t *ctc_dbf_trace = NULL; - -DEFINE_PER_CPU(char[256], ctc_dbf_txt_buf); - -void -ctc_unregister_dbf_views(void) -{ - if (ctc_dbf_setup) - debug_unregister(ctc_dbf_setup); - if (ctc_dbf_data) - debug_unregister(ctc_dbf_data); - if (ctc_dbf_trace) - debug_unregister(ctc_dbf_trace); -} -int -ctc_register_dbf_views(void) -{ - ctc_dbf_setup = debug_register(CTC_DBF_SETUP_NAME, - CTC_DBF_SETUP_PAGES, - CTC_DBF_SETUP_NR_AREAS, - CTC_DBF_SETUP_LEN); - ctc_dbf_data = debug_register(CTC_DBF_DATA_NAME, - CTC_DBF_DATA_PAGES, - CTC_DBF_DATA_NR_AREAS, - CTC_DBF_DATA_LEN); - ctc_dbf_trace = debug_register(CTC_DBF_TRACE_NAME, - CTC_DBF_TRACE_PAGES, - CTC_DBF_TRACE_NR_AREAS, - CTC_DBF_TRACE_LEN); - - if ((ctc_dbf_setup == NULL) || (ctc_dbf_data == NULL) || - (ctc_dbf_trace == NULL)) { - ctc_unregister_dbf_views(); - return -ENOMEM; - } - debug_register_view(ctc_dbf_setup, &debug_hex_ascii_view); - debug_set_level(ctc_dbf_setup, CTC_DBF_SETUP_LEVEL); - - debug_register_view(ctc_dbf_data, &debug_hex_ascii_view); - debug_set_level(ctc_dbf_data, CTC_DBF_DATA_LEVEL); - - debug_register_view(ctc_dbf_trace, &debug_hex_ascii_view); - debug_set_level(ctc_dbf_trace, CTC_DBF_TRACE_LEVEL); - - return 0; -} - diff --git a/drivers/s390/net/ctcdbug.h b/drivers/s390/net/ctcdbug.h deleted file mode 100644 index 413925e..0000000 --- a/drivers/s390/net/ctcdbug.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * - * linux/drivers/s390/net/ctcdbug.h - * - * CTC / ESCON network driver - s390 dbf exploit. - * - * Copyright 2000,2003 IBM Corporation - * - * Author(s): Original Code written by - * Peter Tiedemann (ptiedem@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef _CTCDBUG_H_ -#define _CTCDBUG_H_ - -#include -#include "ctcmain.h" -/** - * Debug Facility stuff - */ -#define CTC_DBF_SETUP_NAME "ctc_setup" -#define CTC_DBF_SETUP_LEN 16 -#define CTC_DBF_SETUP_PAGES 8 -#define CTC_DBF_SETUP_NR_AREAS 1 -#define CTC_DBF_SETUP_LEVEL 3 - -#define CTC_DBF_DATA_NAME "ctc_data" -#define CTC_DBF_DATA_LEN 128 -#define CTC_DBF_DATA_PAGES 8 -#define CTC_DBF_DATA_NR_AREAS 1 -#define CTC_DBF_DATA_LEVEL 3 - -#define CTC_DBF_TRACE_NAME "ctc_trace" -#define CTC_DBF_TRACE_LEN 16 -#define CTC_DBF_TRACE_PAGES 4 -#define CTC_DBF_TRACE_NR_AREAS 2 -#define CTC_DBF_TRACE_LEVEL 3 - -#define DBF_TEXT(name,level,text) \ - do { \ - debug_text_event(ctc_dbf_##name,level,text); \ - } while (0) - -#define DBF_HEX(name,level,addr,len) \ - do { \ - debug_event(ctc_dbf_##name,level,(void*)(addr),len); \ - } while (0) - -DECLARE_PER_CPU(char[256], ctc_dbf_txt_buf); -extern debug_info_t *ctc_dbf_setup; -extern debug_info_t *ctc_dbf_data; -extern debug_info_t *ctc_dbf_trace; - - -#define DBF_TEXT_(name,level,text...) \ - do { \ - char* ctc_dbf_txt_buf = get_cpu_var(ctc_dbf_txt_buf); \ - sprintf(ctc_dbf_txt_buf, text); \ - debug_text_event(ctc_dbf_##name,level,ctc_dbf_txt_buf); \ - put_cpu_var(ctc_dbf_txt_buf); \ - } while (0) - -#define DBF_SPRINTF(name,level,text...) \ - do { \ - debug_sprintf_event(ctc_dbf_trace, level, ##text ); \ - debug_sprintf_event(ctc_dbf_trace, level, text ); \ - } while (0) - - -int ctc_register_dbf_views(void); - -void ctc_unregister_dbf_views(void); - -/** - * some more debug stuff - */ - -#define HEXDUMP16(importance,header,ptr) \ -PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x\n", \ - *(((char*)ptr)),*(((char*)ptr)+1),*(((char*)ptr)+2), \ - *(((char*)ptr)+3),*(((char*)ptr)+4),*(((char*)ptr)+5), \ - *(((char*)ptr)+6),*(((char*)ptr)+7),*(((char*)ptr)+8), \ - *(((char*)ptr)+9),*(((char*)ptr)+10),*(((char*)ptr)+11), \ - *(((char*)ptr)+12),*(((char*)ptr)+13), \ - *(((char*)ptr)+14),*(((char*)ptr)+15)); \ -PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x\n", \ - *(((char*)ptr)+16),*(((char*)ptr)+17), \ - *(((char*)ptr)+18),*(((char*)ptr)+19), \ - *(((char*)ptr)+20),*(((char*)ptr)+21), \ - *(((char*)ptr)+22),*(((char*)ptr)+23), \ - *(((char*)ptr)+24),*(((char*)ptr)+25), \ - *(((char*)ptr)+26),*(((char*)ptr)+27), \ - *(((char*)ptr)+28),*(((char*)ptr)+29), \ - *(((char*)ptr)+30),*(((char*)ptr)+31)); - -static inline void -hex_dump(unsigned char *buf, size_t len) -{ - size_t i; - - for (i = 0; i < len; i++) { - if (i && !(i % 16)) - printk("\n"); - printk("%02x ", *(buf + i)); - } - printk("\n"); -} - - -#endif diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c deleted file mode 100644 index 77a5031..0000000 --- a/drivers/s390/net/ctcmain.c +++ /dev/null @@ -1,3062 +0,0 @@ -/* - * CTC / ESCON network driver - * - * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com) - * Fixes by : Jochen Röhrig (roehrig@de.ibm.com) - * Arnaldo Carvalho de Melo - Peter Tiedemann (ptiedem@de.ibm.com) - * Driver Model stuff by : Cornelia Huck - * - * Documentation used: - * - Principles of Operation (IBM doc#: SA22-7201-06) - * - Common IO/-Device Commands and Self Description (IBM doc#: SA22-7204-02) - * - Common IO/-Device Commands and Self Description (IBM doc#: SN22-5535) - * - ESCON Channel-to-Channel Adapter (IBM doc#: SA22-7203-00) - * - ESCON I/O Interface (IBM doc#: SA22-7202-029 - * - * and the source of the original CTC driver by: - * Dieter Wellerdiek (wel@de.ibm.com) - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - * Jochen Röhrig (roehrig@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#undef DEBUG -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include "fsm.h" -#include "cu3088.h" - -#include "ctcdbug.h" -#include "ctcmain.h" - -MODULE_AUTHOR("(C) 2000 IBM Corp. by Fritz Elfert (felfert@millenux.com)"); -MODULE_DESCRIPTION("Linux for S/390 CTC/Escon Driver"); -MODULE_LICENSE("GPL"); -/** - * States of the interface statemachine. - */ -enum dev_states { - DEV_STATE_STOPPED, - DEV_STATE_STARTWAIT_RXTX, - DEV_STATE_STARTWAIT_RX, - DEV_STATE_STARTWAIT_TX, - DEV_STATE_STOPWAIT_RXTX, - DEV_STATE_STOPWAIT_RX, - DEV_STATE_STOPWAIT_TX, - DEV_STATE_RUNNING, - /** - * MUST be always the last element!! - */ - CTC_NR_DEV_STATES -}; - -static const char *dev_state_names[] = { - "Stopped", - "StartWait RXTX", - "StartWait RX", - "StartWait TX", - "StopWait RXTX", - "StopWait RX", - "StopWait TX", - "Running", -}; - -/** - * Events of the interface statemachine. - */ -enum dev_events { - DEV_EVENT_START, - DEV_EVENT_STOP, - DEV_EVENT_RXUP, - DEV_EVENT_TXUP, - DEV_EVENT_RXDOWN, - DEV_EVENT_TXDOWN, - DEV_EVENT_RESTART, - /** - * MUST be always the last element!! - */ - CTC_NR_DEV_EVENTS -}; - -static const char *dev_event_names[] = { - "Start", - "Stop", - "RX up", - "TX up", - "RX down", - "TX down", - "Restart", -}; - -/** - * Events of the channel statemachine - */ -enum ch_events { - /** - * Events, representing return code of - * I/O operations (ccw_device_start, ccw_device_halt et al.) - */ - CH_EVENT_IO_SUCCESS, - CH_EVENT_IO_EBUSY, - CH_EVENT_IO_ENODEV, - CH_EVENT_IO_EIO, - CH_EVENT_IO_UNKNOWN, - - CH_EVENT_ATTNBUSY, - CH_EVENT_ATTN, - CH_EVENT_BUSY, - - /** - * Events, representing unit-check - */ - CH_EVENT_UC_RCRESET, - CH_EVENT_UC_RSRESET, - CH_EVENT_UC_TXTIMEOUT, - CH_EVENT_UC_TXPARITY, - CH_EVENT_UC_HWFAIL, - CH_EVENT_UC_RXPARITY, - CH_EVENT_UC_ZERO, - CH_EVENT_UC_UNKNOWN, - - /** - * Events, representing subchannel-check - */ - CH_EVENT_SC_UNKNOWN, - - /** - * Events, representing machine checks - */ - CH_EVENT_MC_FAIL, - CH_EVENT_MC_GOOD, - - /** - * Event, representing normal IRQ - */ - CH_EVENT_IRQ, - CH_EVENT_FINSTAT, - - /** - * Event, representing timer expiry. - */ - CH_EVENT_TIMER, - - /** - * Events, representing commands from upper levels. - */ - CH_EVENT_START, - CH_EVENT_STOP, - - /** - * MUST be always the last element!! - */ - NR_CH_EVENTS, -}; - -/** - * States of the channel statemachine. - */ -enum ch_states { - /** - * Channel not assigned to any device, - * initial state, direction invalid - */ - CH_STATE_IDLE, - - /** - * Channel assigned but not operating - */ - CH_STATE_STOPPED, - CH_STATE_STARTWAIT, - CH_STATE_STARTRETRY, - CH_STATE_SETUPWAIT, - CH_STATE_RXINIT, - CH_STATE_TXINIT, - CH_STATE_RX, - CH_STATE_TX, - CH_STATE_RXIDLE, - CH_STATE_TXIDLE, - CH_STATE_RXERR, - CH_STATE_TXERR, - CH_STATE_TERM, - CH_STATE_DTERM, - CH_STATE_NOTOP, - - /** - * MUST be always the last element!! - */ - NR_CH_STATES, -}; - -static int loglevel = CTC_LOGLEVEL_DEFAULT; - -/** - * Linked list of all detected channels. - */ -static struct channel *channels = NULL; - -/** - * Print Banner. - */ -static void -print_banner(void) -{ - static int printed = 0; - - if (printed) - return; - - printk(KERN_INFO "CTC driver initialized\n"); - printed = 1; -} - -/** - * Return type of a detected device. - */ -static enum channel_types -get_channel_type(struct ccw_device_id *id) -{ - enum channel_types type = (enum channel_types) id->driver_info; - - if (type == channel_type_ficon) - type = channel_type_escon; - - return type; -} - -static const char *ch_event_names[] = { - "ccw_device success", - "ccw_device busy", - "ccw_device enodev", - "ccw_device ioerr", - "ccw_device unknown", - - "Status ATTN & BUSY", - "Status ATTN", - "Status BUSY", - - "Unit check remote reset", - "Unit check remote system reset", - "Unit check TX timeout", - "Unit check TX parity", - "Unit check Hardware failure", - "Unit check RX parity", - "Unit check ZERO", - "Unit check Unknown", - - "SubChannel check Unknown", - - "Machine check failure", - "Machine check operational", - - "IRQ normal", - "IRQ final", - - "Timer", - - "Start", - "Stop", -}; - -static const char *ch_state_names[] = { - "Idle", - "Stopped", - "StartWait", - "StartRetry", - "SetupWait", - "RX init", - "TX init", - "RX", - "TX", - "RX idle", - "TX idle", - "RX error", - "TX error", - "Terminating", - "Restarting", - "Not operational", -}; - -#ifdef DEBUG -/** - * Dump header and first 16 bytes of an sk_buff for debugging purposes. - * - * @param skb The sk_buff to dump. - * @param offset Offset relative to skb-data, where to start the dump. - */ -static void -ctc_dump_skb(struct sk_buff *skb, int offset) -{ - unsigned char *p = skb->data; - __u16 bl; - struct ll_header *header; - int i; - - if (!(loglevel & CTC_LOGLEVEL_DEBUG)) - return; - p += offset; - bl = *((__u16 *) p); - p += 2; - header = (struct ll_header *) p; - p -= 2; - - printk(KERN_DEBUG "dump:\n"); - printk(KERN_DEBUG "blocklen=%d %04x\n", bl, bl); - - printk(KERN_DEBUG "h->length=%d %04x\n", header->length, - header->length); - printk(KERN_DEBUG "h->type=%04x\n", header->type); - printk(KERN_DEBUG "h->unused=%04x\n", header->unused); - if (bl > 16) - bl = 16; - printk(KERN_DEBUG "data: "); - for (i = 0; i < bl; i++) - printk("%02x%s", *p++, (i % 16) ? " " : "\n<7>"); - printk("\n"); -} -#else -static inline void -ctc_dump_skb(struct sk_buff *skb, int offset) -{ -} -#endif - -/** - * Unpack a just received skb and hand it over to - * upper layers. - * - * @param ch The channel where this skb has been received. - * @param pskb The received skb. - */ -static void -ctc_unpack_skb(struct channel *ch, struct sk_buff *pskb) -{ - struct net_device *dev = ch->netdev; - struct ctc_priv *privptr = (struct ctc_priv *) dev->priv; - __u16 len = *((__u16 *) pskb->data); - - DBF_TEXT(trace, 4, __FUNCTION__); - skb_put(pskb, 2 + LL_HEADER_LENGTH); - skb_pull(pskb, 2); - pskb->dev = dev; - pskb->ip_summed = CHECKSUM_UNNECESSARY; - while (len > 0) { - struct sk_buff *skb; - struct ll_header *header = (struct ll_header *) pskb->data; - - skb_pull(pskb, LL_HEADER_LENGTH); - if ((ch->protocol == CTC_PROTO_S390) && - (header->type != ETH_P_IP)) { - -#ifndef DEBUG - if (!(ch->logflags & LOG_FLAG_ILLEGALPKT)) { -#endif - /** - * Check packet type only if we stick strictly - * to S/390's protocol of OS390. This only - * supports IP. Otherwise allow any packet - * type. - */ - ctc_pr_warn( - "%s Illegal packet type 0x%04x received, dropping\n", - dev->name, header->type); - ch->logflags |= LOG_FLAG_ILLEGALPKT; -#ifndef DEBUG - } -#endif -#ifdef DEBUG - ctc_dump_skb(pskb, -6); -#endif - privptr->stats.rx_dropped++; - privptr->stats.rx_frame_errors++; - return; - } - pskb->protocol = ntohs(header->type); - if (header->length <= LL_HEADER_LENGTH) { -#ifndef DEBUG - if (!(ch->logflags & LOG_FLAG_ILLEGALSIZE)) { -#endif - ctc_pr_warn( - "%s Illegal packet size %d " - "received (MTU=%d blocklen=%d), " - "dropping\n", dev->name, header->length, - dev->mtu, len); - ch->logflags |= LOG_FLAG_ILLEGALSIZE; -#ifndef DEBUG - } -#endif -#ifdef DEBUG - ctc_dump_skb(pskb, -6); -#endif - privptr->stats.rx_dropped++; - privptr->stats.rx_length_errors++; - return; - } - header->length -= LL_HEADER_LENGTH; - len -= LL_HEADER_LENGTH; - if ((header->length > skb_tailroom(pskb)) || - (header->length > len)) { -#ifndef DEBUG - if (!(ch->logflags & LOG_FLAG_OVERRUN)) { -#endif - ctc_pr_warn( - "%s Illegal packet size %d " - "(beyond the end of received data), " - "dropping\n", dev->name, header->length); - ch->logflags |= LOG_FLAG_OVERRUN; -#ifndef DEBUG - } -#endif -#ifdef DEBUG - ctc_dump_skb(pskb, -6); -#endif - privptr->stats.rx_dropped++; - privptr->stats.rx_length_errors++; - return; - } - skb_put(pskb, header->length); - skb_reset_mac_header(pskb); - len -= header->length; - skb = dev_alloc_skb(pskb->len); - if (!skb) { -#ifndef DEBUG - if (!(ch->logflags & LOG_FLAG_NOMEM)) { -#endif - ctc_pr_warn( - "%s Out of memory in ctc_unpack_skb\n", - dev->name); - ch->logflags |= LOG_FLAG_NOMEM; -#ifndef DEBUG - } -#endif - privptr->stats.rx_dropped++; - return; - } - skb_copy_from_linear_data(pskb, skb_put(skb, pskb->len), - pskb->len); - skb_reset_mac_header(skb); - skb->dev = pskb->dev; - skb->protocol = pskb->protocol; - pskb->ip_summed = CHECKSUM_UNNECESSARY; - /** - * reset logflags - */ - ch->logflags = 0; - privptr->stats.rx_packets++; - privptr->stats.rx_bytes += skb->len; - netif_rx_ni(skb); - dev->last_rx = jiffies; - if (len > 0) { - skb_pull(pskb, header->length); - if (skb_tailroom(pskb) < LL_HEADER_LENGTH) { -#ifndef DEBUG - if (!(ch->logflags & LOG_FLAG_OVERRUN)) { -#endif - ctc_pr_warn( - "%s Overrun in ctc_unpack_skb\n", - dev->name); - ch->logflags |= LOG_FLAG_OVERRUN; -#ifndef DEBUG - } -#endif - return; - } - skb_put(pskb, LL_HEADER_LENGTH); - } - } -} - -/** - * Check return code of a preceeding ccw_device call, halt_IO etc... - * - * @param ch The channel, the error belongs to. - * @param return_code The error code to inspect. - */ -static void -ccw_check_return_code(struct channel *ch, int return_code, char *msg) -{ - DBF_TEXT(trace, 5, __FUNCTION__); - switch (return_code) { - case 0: - fsm_event(ch->fsm, CH_EVENT_IO_SUCCESS, ch); - break; - case -EBUSY: - ctc_pr_warn("%s (%s): Busy !\n", ch->id, msg); - fsm_event(ch->fsm, CH_EVENT_IO_EBUSY, ch); - break; - case -ENODEV: - ctc_pr_emerg("%s (%s): Invalid device called for IO\n", - ch->id, msg); - fsm_event(ch->fsm, CH_EVENT_IO_ENODEV, ch); - break; - case -EIO: - ctc_pr_emerg("%s (%s): Status pending... \n", - ch->id, msg); - fsm_event(ch->fsm, CH_EVENT_IO_EIO, ch); - break; - default: - ctc_pr_emerg("%s (%s): Unknown error in do_IO %04x\n", - ch->id, msg, return_code); - fsm_event(ch->fsm, CH_EVENT_IO_UNKNOWN, ch); - } -} - -/** - * Check sense of a unit check. - * - * @param ch The channel, the sense code belongs to. - * @param sense The sense code to inspect. - */ -static void -ccw_unit_check(struct channel *ch, unsigned char sense) -{ - DBF_TEXT(trace, 5, __FUNCTION__); - if (sense & SNS0_INTERVENTION_REQ) { - if (sense & 0x01) { - ctc_pr_debug("%s: Interface disc. or Sel. reset " - "(remote)\n", ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_RCRESET, ch); - } else { - ctc_pr_debug("%s: System reset (remote)\n", ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_RSRESET, ch); - } - } else if (sense & SNS0_EQUIPMENT_CHECK) { - if (sense & SNS0_BUS_OUT_CHECK) { - ctc_pr_warn("%s: Hardware malfunction (remote)\n", - ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_HWFAIL, ch); - } else { - ctc_pr_warn("%s: Read-data parity error (remote)\n", - ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_RXPARITY, ch); - } - } else if (sense & SNS0_BUS_OUT_CHECK) { - if (sense & 0x04) { - ctc_pr_warn("%s: Data-streaming timeout)\n", ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_TXTIMEOUT, ch); - } else { - ctc_pr_warn("%s: Data-transfer parity error\n", ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_TXPARITY, ch); - } - } else if (sense & SNS0_CMD_REJECT) { - ctc_pr_warn("%s: Command reject\n", ch->id); - } else if (sense == 0) { - ctc_pr_debug("%s: Unit check ZERO\n", ch->id); - fsm_event(ch->fsm, CH_EVENT_UC_ZERO, ch); - } else { - ctc_pr_warn("%s: Unit Check with sense code: %02x\n", - ch->id, sense); - fsm_event(ch->fsm, CH_EVENT_UC_UNKNOWN, ch); - } -} - -static void -ctc_purge_skb_queue(struct sk_buff_head *q) -{ - struct sk_buff *skb; - - DBF_TEXT(trace, 5, __FUNCTION__); - - while ((skb = skb_dequeue(q))) { - atomic_dec(&skb->users); - dev_kfree_skb_irq(skb); - } -} - -static int -ctc_checkalloc_buffer(struct channel *ch, int warn) -{ - DBF_TEXT(trace, 5, __FUNCTION__); - if ((ch->trans_skb == NULL) || - (ch->flags & CHANNEL_FLAGS_BUFSIZE_CHANGED)) { - if (ch->trans_skb != NULL) - dev_kfree_skb(ch->trans_skb); - clear_normalized_cda(&ch->ccw[1]); - ch->trans_skb = __dev_alloc_skb(ch->max_bufsize, - GFP_ATOMIC | GFP_DMA); - if (ch->trans_skb == NULL) { - if (warn) - ctc_pr_warn( - "%s: Couldn't alloc %s trans_skb\n", - ch->id, - (CHANNEL_DIRECTION(ch->flags) == READ) ? - "RX" : "TX"); - return -ENOMEM; - } - ch->ccw[1].count = ch->max_bufsize; - if (set_normalized_cda(&ch->ccw[1], ch->trans_skb->data)) { - dev_kfree_skb(ch->trans_skb); - ch->trans_skb = NULL; - if (warn) - ctc_pr_warn( - "%s: set_normalized_cda for %s " - "trans_skb failed, dropping packets\n", - ch->id, - (CHANNEL_DIRECTION(ch->flags) == READ) ? - "RX" : "TX"); - return -ENOMEM; - } - ch->ccw[1].count = 0; - ch->trans_skb_data = ch->trans_skb->data; - ch->flags &= ~CHANNEL_FLAGS_BUFSIZE_CHANGED; - } - return 0; -} - -/** - * Dummy NOP action for statemachines - */ -static void -fsm_action_nop(fsm_instance * fi, int event, void *arg) -{ -} - -/** - * Actions for channel - statemachines. - *****************************************************************************/ - -/** - * Normal data has been send. Free the corresponding - * skb (it's in io_queue), reset dev->tbusy and - * revert to idle state. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_txdone(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - struct ctc_priv *privptr = dev->priv; - struct sk_buff *skb; - int first = 1; - int i; - unsigned long duration; - struct timespec done_stamp = current_kernel_time(); - - DBF_TEXT(trace, 4, __FUNCTION__); - - duration = - (done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000 + - (done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000; - if (duration > ch->prof.tx_time) - ch->prof.tx_time = duration; - - if (ch->irb->scsw.count != 0) - ctc_pr_debug("%s: TX not complete, remaining %d bytes\n", - dev->name, ch->irb->scsw.count); - fsm_deltimer(&ch->timer); - while ((skb = skb_dequeue(&ch->io_queue))) { - privptr->stats.tx_packets++; - privptr->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; - if (first) { - privptr->stats.tx_bytes += 2; - first = 0; - } - atomic_dec(&skb->users); - dev_kfree_skb_irq(skb); - } - spin_lock(&ch->collect_lock); - clear_normalized_cda(&ch->ccw[4]); - if (ch->collect_len > 0) { - int rc; - - if (ctc_checkalloc_buffer(ch, 1)) { - spin_unlock(&ch->collect_lock); - return; - } - ch->trans_skb->data = ch->trans_skb_data; - skb_reset_tail_pointer(ch->trans_skb); - ch->trans_skb->len = 0; - if (ch->prof.maxmulti < (ch->collect_len + 2)) - ch->prof.maxmulti = ch->collect_len + 2; - if (ch->prof.maxcqueue < skb_queue_len(&ch->collect_queue)) - ch->prof.maxcqueue = skb_queue_len(&ch->collect_queue); - *((__u16 *) skb_put(ch->trans_skb, 2)) = ch->collect_len + 2; - i = 0; - while ((skb = skb_dequeue(&ch->collect_queue))) { - skb_copy_from_linear_data(skb, skb_put(ch->trans_skb, - skb->len), - skb->len); - privptr->stats.tx_packets++; - privptr->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; - atomic_dec(&skb->users); - dev_kfree_skb_irq(skb); - i++; - } - ch->collect_len = 0; - spin_unlock(&ch->collect_lock); - ch->ccw[1].count = ch->trans_skb->len; - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - ch->prof.send_stamp = current_kernel_time(); - rc = ccw_device_start(ch->cdev, &ch->ccw[0], - (unsigned long) ch, 0xff, 0); - ch->prof.doios_multi++; - if (rc != 0) { - privptr->stats.tx_dropped += i; - privptr->stats.tx_errors += i; - fsm_deltimer(&ch->timer); - ccw_check_return_code(ch, rc, "chained TX"); - } - } else { - spin_unlock(&ch->collect_lock); - fsm_newstate(fi, CH_STATE_TXIDLE); - } - ctc_clear_busy(dev); -} - -/** - * Initial data is sent. - * Notify device statemachine that we are up and - * running. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_txidle(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - - DBF_TEXT(trace, 4, __FUNCTION__); - fsm_deltimer(&ch->timer); - fsm_newstate(fi, CH_STATE_TXIDLE); - fsm_event(((struct ctc_priv *) ch->netdev->priv)->fsm, DEV_EVENT_TXUP, - ch->netdev); -} - -/** - * Got normal data, check for sanity, queue it up, allocate new buffer - * trigger bottom half, and initiate next read. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_rx(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - struct ctc_priv *privptr = dev->priv; - int len = ch->max_bufsize - ch->irb->scsw.count; - struct sk_buff *skb = ch->trans_skb; - __u16 block_len = *((__u16 *) skb->data); - int check_len; - int rc; - - DBF_TEXT(trace, 4, __FUNCTION__); - fsm_deltimer(&ch->timer); - if (len < 8) { - ctc_pr_debug("%s: got packet with length %d < 8\n", - dev->name, len); - privptr->stats.rx_dropped++; - privptr->stats.rx_length_errors++; - goto again; - } - if (len > ch->max_bufsize) { - ctc_pr_debug("%s: got packet with length %d > %d\n", - dev->name, len, ch->max_bufsize); - privptr->stats.rx_dropped++; - privptr->stats.rx_length_errors++; - goto again; - } - - /** - * VM TCP seems to have a bug sending 2 trailing bytes of garbage. - */ - switch (ch->protocol) { - case CTC_PROTO_S390: - case CTC_PROTO_OS390: - check_len = block_len + 2; - break; - default: - check_len = block_len; - break; - } - if ((len < block_len) || (len > check_len)) { - ctc_pr_debug("%s: got block length %d != rx length %d\n", - dev->name, block_len, len); -#ifdef DEBUG - ctc_dump_skb(skb, 0); -#endif - *((__u16 *) skb->data) = len; - privptr->stats.rx_dropped++; - privptr->stats.rx_length_errors++; - goto again; - } - block_len -= 2; - if (block_len > 0) { - *((__u16 *) skb->data) = block_len; - ctc_unpack_skb(ch, skb); - } - again: - skb->data = ch->trans_skb_data; - skb_reset_tail_pointer(skb); - skb->len = 0; - if (ctc_checkalloc_buffer(ch, 1)) - return; - ch->ccw[1].count = ch->max_bufsize; - rc = ccw_device_start(ch->cdev, &ch->ccw[0], (unsigned long) ch, 0xff, 0); - if (rc != 0) - ccw_check_return_code(ch, rc, "normal RX"); -} - -static void ch_action_rxidle(fsm_instance * fi, int event, void *arg); - -/** - * Initialize connection by sending a __u16 of value 0. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_firstio(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - int rc; - - DBF_TEXT(trace, 4, __FUNCTION__); - - if (fsm_getstate(fi) == CH_STATE_TXIDLE) - ctc_pr_debug("%s: remote side issued READ?, init ...\n", ch->id); - fsm_deltimer(&ch->timer); - if (ctc_checkalloc_buffer(ch, 1)) - return; - if ((fsm_getstate(fi) == CH_STATE_SETUPWAIT) && - (ch->protocol == CTC_PROTO_OS390)) { - /* OS/390 resp. z/OS */ - if (CHANNEL_DIRECTION(ch->flags) == READ) { - *((__u16 *) ch->trans_skb->data) = CTC_INITIAL_BLOCKLEN; - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, - CH_EVENT_TIMER, ch); - ch_action_rxidle(fi, event, arg); - } else { - struct net_device *dev = ch->netdev; - fsm_newstate(fi, CH_STATE_TXIDLE); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXUP, dev); - } - return; - } - - /** - * Don't setup a timer for receiving the initial RX frame - * if in compatibility mode, since VM TCP delays the initial - * frame until it has some data to send. - */ - if ((CHANNEL_DIRECTION(ch->flags) == WRITE) || - (ch->protocol != CTC_PROTO_S390)) - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - - *((__u16 *) ch->trans_skb->data) = CTC_INITIAL_BLOCKLEN; - ch->ccw[1].count = 2; /* Transfer only length */ - - fsm_newstate(fi, (CHANNEL_DIRECTION(ch->flags) == READ) - ? CH_STATE_RXINIT : CH_STATE_TXINIT); - rc = ccw_device_start(ch->cdev, &ch->ccw[0], (unsigned long) ch, 0xff, 0); - if (rc != 0) { - fsm_deltimer(&ch->timer); - fsm_newstate(fi, CH_STATE_SETUPWAIT); - ccw_check_return_code(ch, rc, "init IO"); - } - /** - * If in compatibility mode since we don't setup a timer, we - * also signal RX channel up immediately. This enables us - * to send packets early which in turn usually triggers some - * reply from VM TCP which brings up the RX channel to it's - * final state. - */ - if ((CHANNEL_DIRECTION(ch->flags) == READ) && - (ch->protocol == CTC_PROTO_S390)) { - struct net_device *dev = ch->netdev; - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_RXUP, - dev); - } -} - -/** - * Got initial data, check it. If OK, - * notify device statemachine that we are up and - * running. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_rxidle(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - __u16 buflen; - int rc; - - DBF_TEXT(trace, 4, __FUNCTION__); - fsm_deltimer(&ch->timer); - buflen = *((__u16 *) ch->trans_skb->data); -#ifdef DEBUG - ctc_pr_debug("%s: Initial RX count %d\n", dev->name, buflen); -#endif - if (buflen >= CTC_INITIAL_BLOCKLEN) { - if (ctc_checkalloc_buffer(ch, 1)) - return; - ch->ccw[1].count = ch->max_bufsize; - fsm_newstate(fi, CH_STATE_RXIDLE); - rc = ccw_device_start(ch->cdev, &ch->ccw[0], - (unsigned long) ch, 0xff, 0); - if (rc != 0) { - fsm_newstate(fi, CH_STATE_RXINIT); - ccw_check_return_code(ch, rc, "initial RX"); - } else - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXUP, dev); - } else { - ctc_pr_debug("%s: Initial RX count %d not %d\n", - dev->name, buflen, CTC_INITIAL_BLOCKLEN); - ch_action_firstio(fi, event, arg); - } -} - -/** - * Set channel into extended mode. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_setmode(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - int rc; - unsigned long saveflags; - - DBF_TEXT(trace, 4, __FUNCTION__); - fsm_deltimer(&ch->timer); - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - fsm_newstate(fi, CH_STATE_SETUPWAIT); - saveflags = 0; /* avoids compiler warning with - spin_unlock_irqrestore */ - if (event == CH_EVENT_TIMER) // only for timer not yet locked - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); - rc = ccw_device_start(ch->cdev, &ch->ccw[6], (unsigned long) ch, 0xff, 0); - if (event == CH_EVENT_TIMER) - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); - if (rc != 0) { - fsm_deltimer(&ch->timer); - fsm_newstate(fi, CH_STATE_STARTWAIT); - ccw_check_return_code(ch, rc, "set Mode"); - } else - ch->retry = 0; -} - -/** - * Setup channel. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_start(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - unsigned long saveflags; - int rc; - struct net_device *dev; - - DBF_TEXT(trace, 4, __FUNCTION__); - if (ch == NULL) { - ctc_pr_warn("ch_action_start ch=NULL\n"); - return; - } - if (ch->netdev == NULL) { - ctc_pr_warn("ch_action_start dev=NULL, id=%s\n", ch->id); - return; - } - dev = ch->netdev; - -#ifdef DEBUG - ctc_pr_debug("%s: %s channel start\n", dev->name, - (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); -#endif - - if (ch->trans_skb != NULL) { - clear_normalized_cda(&ch->ccw[1]); - dev_kfree_skb(ch->trans_skb); - ch->trans_skb = NULL; - } - if (CHANNEL_DIRECTION(ch->flags) == READ) { - ch->ccw[1].cmd_code = CCW_CMD_READ; - ch->ccw[1].flags = CCW_FLAG_SLI; - ch->ccw[1].count = 0; - } else { - ch->ccw[1].cmd_code = CCW_CMD_WRITE; - ch->ccw[1].flags = CCW_FLAG_SLI | CCW_FLAG_CC; - ch->ccw[1].count = 0; - } - if (ctc_checkalloc_buffer(ch, 0)) { - ctc_pr_notice( - "%s: Could not allocate %s trans_skb, delaying " - "allocation until first transfer\n", - dev->name, - (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); - } - - ch->ccw[0].cmd_code = CCW_CMD_PREPARE; - ch->ccw[0].flags = CCW_FLAG_SLI | CCW_FLAG_CC; - ch->ccw[0].count = 0; - ch->ccw[0].cda = 0; - ch->ccw[2].cmd_code = CCW_CMD_NOOP; /* jointed CE + DE */ - ch->ccw[2].flags = CCW_FLAG_SLI; - ch->ccw[2].count = 0; - ch->ccw[2].cda = 0; - memcpy(&ch->ccw[3], &ch->ccw[0], sizeof (struct ccw1) * 3); - ch->ccw[4].cda = 0; - ch->ccw[4].flags &= ~CCW_FLAG_IDA; - - fsm_newstate(fi, CH_STATE_STARTWAIT); - fsm_addtimer(&ch->timer, 1000, CH_EVENT_TIMER, ch); - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); - rc = ccw_device_halt(ch->cdev, (unsigned long) ch); - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); - if (rc != 0) { - if (rc != -EBUSY) - fsm_deltimer(&ch->timer); - ccw_check_return_code(ch, rc, "initial HaltIO"); - } -#ifdef DEBUG - ctc_pr_debug("ctc: %s(): leaving\n", __func__); -#endif -} - -/** - * Shutdown a channel. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_haltio(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - unsigned long saveflags; - int rc; - int oldstate; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - saveflags = 0; /* avoids comp warning with - spin_unlock_irqrestore */ - if (event == CH_EVENT_STOP) // only for STOP not yet locked - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); - oldstate = fsm_getstate(fi); - fsm_newstate(fi, CH_STATE_TERM); - rc = ccw_device_halt(ch->cdev, (unsigned long) ch); - if (event == CH_EVENT_STOP) - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); - if (rc != 0) { - if (rc != -EBUSY) { - fsm_deltimer(&ch->timer); - fsm_newstate(fi, oldstate); - } - ccw_check_return_code(ch, rc, "HaltIO in ch_action_haltio"); - } -} - -/** - * A channel has successfully been halted. - * Cleanup it's queue and notify interface statemachine. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_stopped(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - fsm_newstate(fi, CH_STATE_STOPPED); - if (ch->trans_skb != NULL) { - clear_normalized_cda(&ch->ccw[1]); - dev_kfree_skb(ch->trans_skb); - ch->trans_skb = NULL; - } - if (CHANNEL_DIRECTION(ch->flags) == READ) { - skb_queue_purge(&ch->io_queue); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXDOWN, dev); - } else { - ctc_purge_skb_queue(&ch->io_queue); - spin_lock(&ch->collect_lock); - ctc_purge_skb_queue(&ch->collect_queue); - ch->collect_len = 0; - spin_unlock(&ch->collect_lock); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - } -} - -/** - * A stop command from device statemachine arrived and we are in - * not operational mode. Set state to stopped. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_stop(fsm_instance * fi, int event, void *arg) -{ - fsm_newstate(fi, CH_STATE_STOPPED); -} - -/** - * A machine check for no path, not operational status or gone device has - * happened. - * Cleanup queue and notify interface statemachine. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_fail(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - fsm_newstate(fi, CH_STATE_NOTOP); - if (CHANNEL_DIRECTION(ch->flags) == READ) { - skb_queue_purge(&ch->io_queue); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXDOWN, dev); - } else { - ctc_purge_skb_queue(&ch->io_queue); - spin_lock(&ch->collect_lock); - ctc_purge_skb_queue(&ch->collect_queue); - ch->collect_len = 0; - spin_unlock(&ch->collect_lock); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - } -} - -/** - * Handle error during setup of channel. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_setuperr(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(setup, 3, __FUNCTION__); - /** - * Special case: Got UC_RCRESET on setmode. - * This means that remote side isn't setup. In this case - * simply retry after some 10 secs... - */ - if ((fsm_getstate(fi) == CH_STATE_SETUPWAIT) && - ((event == CH_EVENT_UC_RCRESET) || - (event == CH_EVENT_UC_RSRESET))) { - fsm_newstate(fi, CH_STATE_STARTRETRY); - fsm_deltimer(&ch->timer); - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - if (CHANNEL_DIRECTION(ch->flags) == READ) { - int rc = ccw_device_halt(ch->cdev, (unsigned long) ch); - if (rc != 0) - ccw_check_return_code( - ch, rc, "HaltIO in ch_action_setuperr"); - } - return; - } - - ctc_pr_debug("%s: Error %s during %s channel setup state=%s\n", - dev->name, ch_event_names[event], - (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX", - fsm_getstate_str(fi)); - if (CHANNEL_DIRECTION(ch->flags) == READ) { - fsm_newstate(fi, CH_STATE_RXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXDOWN, dev); - } else { - fsm_newstate(fi, CH_STATE_TXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - } -} - -/** - * Restart a channel after an error. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_restart(fsm_instance * fi, int event, void *arg) -{ - unsigned long saveflags; - int oldstate; - int rc; - - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - ctc_pr_debug("%s: %s channel restart\n", dev->name, - (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX"); - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - oldstate = fsm_getstate(fi); - fsm_newstate(fi, CH_STATE_STARTWAIT); - saveflags = 0; /* avoids compiler warning with - spin_unlock_irqrestore */ - if (event == CH_EVENT_TIMER) // only for timer not yet locked - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); - rc = ccw_device_halt(ch->cdev, (unsigned long) ch); - if (event == CH_EVENT_TIMER) - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); - if (rc != 0) { - if (rc != -EBUSY) { - fsm_deltimer(&ch->timer); - fsm_newstate(fi, oldstate); - } - ccw_check_return_code(ch, rc, "HaltIO in ch_action_restart"); - } -} - -/** - * Handle error during RX initial handshake (exchange of - * 0-length block header) - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_rxiniterr(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(setup, 3, __FUNCTION__); - if (event == CH_EVENT_TIMER) { - fsm_deltimer(&ch->timer); - ctc_pr_debug("%s: Timeout during RX init handshake\n", dev->name); - if (ch->retry++ < 3) - ch_action_restart(fi, event, arg); - else { - fsm_newstate(fi, CH_STATE_RXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXDOWN, dev); - } - } else - ctc_pr_warn("%s: Error during RX init handshake\n", dev->name); -} - -/** - * Notify device statemachine if we gave up initialization - * of RX channel. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_rxinitfail(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(setup, 3, __FUNCTION__); - fsm_newstate(fi, CH_STATE_RXERR); - ctc_pr_warn("%s: RX initialization failed\n", dev->name); - ctc_pr_warn("%s: RX <-> RX connection detected\n", dev->name); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_RXDOWN, dev); -} - -/** - * Handle RX Unit check remote reset (remote disconnected) - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_rxdisc(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct channel *ch2; - struct net_device *dev = ch->netdev; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - ctc_pr_debug("%s: Got remote disconnect, re-initializing ...\n", - dev->name); - - /** - * Notify device statemachine - */ - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_RXDOWN, dev); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_TXDOWN, dev); - - fsm_newstate(fi, CH_STATE_DTERM); - ch2 = ((struct ctc_priv *) dev->priv)->channel[WRITE]; - fsm_newstate(ch2->fsm, CH_STATE_DTERM); - - ccw_device_halt(ch->cdev, (unsigned long) ch); - ccw_device_halt(ch2->cdev, (unsigned long) ch2); -} - -/** - * Handle error during TX channel initialization. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_txiniterr(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(setup, 2, __FUNCTION__); - if (event == CH_EVENT_TIMER) { - fsm_deltimer(&ch->timer); - ctc_pr_debug("%s: Timeout during TX init handshake\n", dev->name); - if (ch->retry++ < 3) - ch_action_restart(fi, event, arg); - else { - fsm_newstate(fi, CH_STATE_TXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - } - } else - ctc_pr_warn("%s: Error during TX init handshake\n", dev->name); -} - -/** - * Handle TX timeout by retrying operation. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_txretry(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - unsigned long saveflags; - - DBF_TEXT(trace, 4, __FUNCTION__); - fsm_deltimer(&ch->timer); - if (ch->retry++ > 3) { - ctc_pr_debug("%s: TX retry failed, restarting channel\n", - dev->name); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - ch_action_restart(fi, event, arg); - } else { - struct sk_buff *skb; - - ctc_pr_debug("%s: TX retry %d\n", dev->name, ch->retry); - if ((skb = skb_peek(&ch->io_queue))) { - int rc = 0; - - clear_normalized_cda(&ch->ccw[4]); - ch->ccw[4].count = skb->len; - if (set_normalized_cda(&ch->ccw[4], skb->data)) { - ctc_pr_debug( - "%s: IDAL alloc failed, chan restart\n", - dev->name); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - ch_action_restart(fi, event, arg); - return; - } - fsm_addtimer(&ch->timer, 1000, CH_EVENT_TIMER, ch); - saveflags = 0; /* avoids compiler warning with - spin_unlock_irqrestore */ - if (event == CH_EVENT_TIMER) // only for TIMER not yet locked - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), - saveflags); - rc = ccw_device_start(ch->cdev, &ch->ccw[3], - (unsigned long) ch, 0xff, 0); - if (event == CH_EVENT_TIMER) - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), - saveflags); - if (rc != 0) { - fsm_deltimer(&ch->timer); - ccw_check_return_code(ch, rc, "TX in ch_action_txretry"); - ctc_purge_skb_queue(&ch->io_queue); - } - } - } - -} - -/** - * Handle fatal errors during an I/O command. - * - * @param fi An instance of a channel statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from channel * upon call. - */ -static void -ch_action_iofatal(fsm_instance * fi, int event, void *arg) -{ - struct channel *ch = (struct channel *) arg; - struct net_device *dev = ch->netdev; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_deltimer(&ch->timer); - if (CHANNEL_DIRECTION(ch->flags) == READ) { - ctc_pr_debug("%s: RX I/O error\n", dev->name); - fsm_newstate(fi, CH_STATE_RXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_RXDOWN, dev); - } else { - ctc_pr_debug("%s: TX I/O error\n", dev->name); - fsm_newstate(fi, CH_STATE_TXERR); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, - DEV_EVENT_TXDOWN, dev); - } -} - -static void -ch_action_reinit(fsm_instance *fi, int event, void *arg) -{ - struct channel *ch = (struct channel *)arg; - struct net_device *dev = ch->netdev; - struct ctc_priv *privptr = dev->priv; - - DBF_TEXT(trace, 4, __FUNCTION__); - ch_action_iofatal(fi, event, arg); - fsm_addtimer(&privptr->restart_timer, 1000, DEV_EVENT_RESTART, dev); -} - -/** - * The statemachine for a channel. - */ -static const fsm_node ch_fsm[] = { - {CH_STATE_STOPPED, CH_EVENT_STOP, fsm_action_nop }, - {CH_STATE_STOPPED, CH_EVENT_START, ch_action_start }, - {CH_STATE_STOPPED, CH_EVENT_FINSTAT, fsm_action_nop }, - {CH_STATE_STOPPED, CH_EVENT_MC_FAIL, fsm_action_nop }, - - {CH_STATE_NOTOP, CH_EVENT_STOP, ch_action_stop }, - {CH_STATE_NOTOP, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_NOTOP, CH_EVENT_FINSTAT, fsm_action_nop }, - {CH_STATE_NOTOP, CH_EVENT_MC_FAIL, fsm_action_nop }, - {CH_STATE_NOTOP, CH_EVENT_MC_GOOD, ch_action_start }, - - {CH_STATE_STARTWAIT, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_STARTWAIT, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_STARTWAIT, CH_EVENT_FINSTAT, ch_action_setmode }, - {CH_STATE_STARTWAIT, CH_EVENT_TIMER, ch_action_setuperr }, - {CH_STATE_STARTWAIT, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_STARTWAIT, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_STARTWAIT, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_STARTRETRY, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_STARTRETRY, CH_EVENT_TIMER, ch_action_setmode }, - {CH_STATE_STARTRETRY, CH_EVENT_FINSTAT, fsm_action_nop }, - {CH_STATE_STARTRETRY, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_SETUPWAIT, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_SETUPWAIT, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_SETUPWAIT, CH_EVENT_FINSTAT, ch_action_firstio }, - {CH_STATE_SETUPWAIT, CH_EVENT_UC_RCRESET, ch_action_setuperr }, - {CH_STATE_SETUPWAIT, CH_EVENT_UC_RSRESET, ch_action_setuperr }, - {CH_STATE_SETUPWAIT, CH_EVENT_TIMER, ch_action_setmode }, - {CH_STATE_SETUPWAIT, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_SETUPWAIT, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_SETUPWAIT, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_RXINIT, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_RXINIT, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_RXINIT, CH_EVENT_FINSTAT, ch_action_rxidle }, - {CH_STATE_RXINIT, CH_EVENT_UC_RCRESET, ch_action_rxiniterr }, - {CH_STATE_RXINIT, CH_EVENT_UC_RSRESET, ch_action_rxiniterr }, - {CH_STATE_RXINIT, CH_EVENT_TIMER, ch_action_rxiniterr }, - {CH_STATE_RXINIT, CH_EVENT_ATTNBUSY, ch_action_rxinitfail }, - {CH_STATE_RXINIT, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_RXINIT, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_RXINIT, CH_EVENT_UC_ZERO, ch_action_firstio }, - {CH_STATE_RXINIT, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_RXIDLE, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_RXIDLE, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_RXIDLE, CH_EVENT_FINSTAT, ch_action_rx }, - {CH_STATE_RXIDLE, CH_EVENT_UC_RCRESET, ch_action_rxdisc }, -// {CH_STATE_RXIDLE, CH_EVENT_UC_RSRESET, ch_action_rxretry }, - {CH_STATE_RXIDLE, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_RXIDLE, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_RXIDLE, CH_EVENT_MC_FAIL, ch_action_fail }, - {CH_STATE_RXIDLE, CH_EVENT_UC_ZERO, ch_action_rx }, - - {CH_STATE_TXINIT, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_TXINIT, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_TXINIT, CH_EVENT_FINSTAT, ch_action_txidle }, - {CH_STATE_TXINIT, CH_EVENT_UC_RCRESET, ch_action_txiniterr }, - {CH_STATE_TXINIT, CH_EVENT_UC_RSRESET, ch_action_txiniterr }, - {CH_STATE_TXINIT, CH_EVENT_TIMER, ch_action_txiniterr }, - {CH_STATE_TXINIT, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_TXINIT, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_TXINIT, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_TXIDLE, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_TXIDLE, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_TXIDLE, CH_EVENT_FINSTAT, ch_action_firstio }, - {CH_STATE_TXIDLE, CH_EVENT_UC_RCRESET, fsm_action_nop }, - {CH_STATE_TXIDLE, CH_EVENT_UC_RSRESET, fsm_action_nop }, - {CH_STATE_TXIDLE, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_TXIDLE, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_TXIDLE, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_TERM, CH_EVENT_STOP, fsm_action_nop }, - {CH_STATE_TERM, CH_EVENT_START, ch_action_restart }, - {CH_STATE_TERM, CH_EVENT_FINSTAT, ch_action_stopped }, - {CH_STATE_TERM, CH_EVENT_UC_RCRESET, fsm_action_nop }, - {CH_STATE_TERM, CH_EVENT_UC_RSRESET, fsm_action_nop }, - {CH_STATE_TERM, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_DTERM, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_DTERM, CH_EVENT_START, ch_action_restart }, - {CH_STATE_DTERM, CH_EVENT_FINSTAT, ch_action_setmode }, - {CH_STATE_DTERM, CH_EVENT_UC_RCRESET, fsm_action_nop }, - {CH_STATE_DTERM, CH_EVENT_UC_RSRESET, fsm_action_nop }, - {CH_STATE_DTERM, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_TX, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_TX, CH_EVENT_START, fsm_action_nop }, - {CH_STATE_TX, CH_EVENT_FINSTAT, ch_action_txdone }, - {CH_STATE_TX, CH_EVENT_UC_RCRESET, ch_action_txretry }, - {CH_STATE_TX, CH_EVENT_UC_RSRESET, ch_action_txretry }, - {CH_STATE_TX, CH_EVENT_TIMER, ch_action_txretry }, - {CH_STATE_TX, CH_EVENT_IO_ENODEV, ch_action_iofatal }, - {CH_STATE_TX, CH_EVENT_IO_EIO, ch_action_reinit }, - {CH_STATE_TX, CH_EVENT_MC_FAIL, ch_action_fail }, - - {CH_STATE_RXERR, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_TXERR, CH_EVENT_STOP, ch_action_haltio }, - {CH_STATE_TXERR, CH_EVENT_MC_FAIL, ch_action_fail }, - {CH_STATE_RXERR, CH_EVENT_MC_FAIL, ch_action_fail }, -}; - -static const int CH_FSM_LEN = sizeof (ch_fsm) / sizeof (fsm_node); - -/** - * Functions related to setup and device detection. - *****************************************************************************/ - -static inline int -less_than(char *id1, char *id2) -{ - int dev1, dev2, i; - - for (i = 0; i < 5; i++) { - id1++; - id2++; - } - dev1 = simple_strtoul(id1, &id1, 16); - dev2 = simple_strtoul(id2, &id2, 16); - - return (dev1 < dev2); -} - -/** - * Add a new channel to the list of channels. - * Keeps the channel list sorted. - * - * @param cdev The ccw_device to be added. - * @param type The type class of the new channel. - * - * @return 0 on success, !0 on error. - */ -static int -add_channel(struct ccw_device *cdev, enum channel_types type) -{ - struct channel **c = &channels; - struct channel *ch; - - DBF_TEXT(trace, 2, __FUNCTION__); - ch = kzalloc(sizeof(struct channel), GFP_KERNEL); - if (!ch) { - ctc_pr_warn("ctc: Out of memory in add_channel\n"); - return -1; - } - /* assure all flags and counters are reset */ - ch->ccw = kzalloc(8 * sizeof(struct ccw1), GFP_KERNEL | GFP_DMA); - if (!ch->ccw) { - kfree(ch); - ctc_pr_warn("ctc: Out of memory in add_channel\n"); - return -1; - } - - - /** - * "static" ccws are used in the following way: - * - * ccw[0..2] (Channel program for generic I/O): - * 0: prepare - * 1: read or write (depending on direction) with fixed - * buffer (idal allocated once when buffer is allocated) - * 2: nop - * ccw[3..5] (Channel program for direct write of packets) - * 3: prepare - * 4: write (idal allocated on every write). - * 5: nop - * ccw[6..7] (Channel program for initial channel setup): - * 6: set extended mode - * 7: nop - * - * ch->ccw[0..5] are initialized in ch_action_start because - * the channel's direction is yet unknown here. - */ - ch->ccw[6].cmd_code = CCW_CMD_SET_EXTENDED; - ch->ccw[6].flags = CCW_FLAG_SLI; - - ch->ccw[7].cmd_code = CCW_CMD_NOOP; - ch->ccw[7].flags = CCW_FLAG_SLI; - - ch->cdev = cdev; - snprintf(ch->id, CTC_ID_SIZE, "ch-%s", cdev->dev.bus_id); - ch->type = type; - ch->fsm = init_fsm(ch->id, ch_state_names, - ch_event_names, NR_CH_STATES, NR_CH_EVENTS, - ch_fsm, CH_FSM_LEN, GFP_KERNEL); - if (ch->fsm == NULL) { - ctc_pr_warn("ctc: Could not create FSM in add_channel\n"); - kfree(ch->ccw); - kfree(ch); - return -1; - } - fsm_newstate(ch->fsm, CH_STATE_IDLE); - ch->irb = kzalloc(sizeof(struct irb), GFP_KERNEL); - if (!ch->irb) { - ctc_pr_warn("ctc: Out of memory in add_channel\n"); - kfree_fsm(ch->fsm); - kfree(ch->ccw); - kfree(ch); - return -1; - } - while (*c && less_than((*c)->id, ch->id)) - c = &(*c)->next; - if (*c && (!strncmp((*c)->id, ch->id, CTC_ID_SIZE))) { - ctc_pr_debug( - "ctc: add_channel: device %s already in list, " - "using old entry\n", (*c)->id); - kfree(ch->irb); - kfree_fsm(ch->fsm); - kfree(ch->ccw); - kfree(ch); - return 0; - } - - spin_lock_init(&ch->collect_lock); - - fsm_settimer(ch->fsm, &ch->timer); - skb_queue_head_init(&ch->io_queue); - skb_queue_head_init(&ch->collect_queue); - ch->next = *c; - *c = ch; - return 0; -} - -/** - * Release a specific channel in the channel list. - * - * @param ch Pointer to channel struct to be released. - */ -static void -channel_free(struct channel *ch) -{ - ch->flags &= ~CHANNEL_FLAGS_INUSE; - fsm_newstate(ch->fsm, CH_STATE_IDLE); -} - -/** - * Remove a specific channel in the channel list. - * - * @param ch Pointer to channel struct to be released. - */ -static void -channel_remove(struct channel *ch) -{ - struct channel **c = &channels; - - DBF_TEXT(trace, 2, __FUNCTION__); - if (ch == NULL) - return; - - channel_free(ch); - while (*c) { - if (*c == ch) { - *c = ch->next; - fsm_deltimer(&ch->timer); - kfree_fsm(ch->fsm); - clear_normalized_cda(&ch->ccw[4]); - if (ch->trans_skb != NULL) { - clear_normalized_cda(&ch->ccw[1]); - dev_kfree_skb(ch->trans_skb); - } - kfree(ch->ccw); - kfree(ch->irb); - kfree(ch); - return; - } - c = &((*c)->next); - } -} - -/** - * Get a specific channel from the channel list. - * - * @param type Type of channel we are interested in. - * @param id Id of channel we are interested in. - * @param direction Direction we want to use this channel for. - * - * @return Pointer to a channel or NULL if no matching channel available. - */ -static struct channel -* -channel_get(enum channel_types type, char *id, int direction) -{ - struct channel *ch = channels; - - DBF_TEXT(trace, 3, __FUNCTION__); -#ifdef DEBUG - ctc_pr_debug("ctc: %s(): searching for ch with id %s and type %d\n", - __func__, id, type); -#endif - - while (ch && ((strncmp(ch->id, id, CTC_ID_SIZE)) || (ch->type != type))) { -#ifdef DEBUG - ctc_pr_debug("ctc: %s(): ch=0x%p (id=%s, type=%d\n", - __func__, ch, ch->id, ch->type); -#endif - ch = ch->next; - } -#ifdef DEBUG - ctc_pr_debug("ctc: %s(): ch=0x%pq (id=%s, type=%d\n", - __func__, ch, ch->id, ch->type); -#endif - if (!ch) { - ctc_pr_warn("ctc: %s(): channel with id %s " - "and type %d not found in channel list\n", - __func__, id, type); - } else { - if (ch->flags & CHANNEL_FLAGS_INUSE) - ch = NULL; - else { - ch->flags |= CHANNEL_FLAGS_INUSE; - ch->flags &= ~CHANNEL_FLAGS_RWMASK; - ch->flags |= (direction == WRITE) - ? CHANNEL_FLAGS_WRITE : CHANNEL_FLAGS_READ; - fsm_newstate(ch->fsm, CH_STATE_STOPPED); - } - } - return ch; -} - -/** - * Return the channel type by name. - * - * @param name Name of network interface. - * - * @return Type class of channel to be used for that interface. - */ -static enum channel_types inline -extract_channel_media(char *name) -{ - enum channel_types ret = channel_type_unknown; - - if (name != NULL) { - if (strncmp(name, "ctc", 3) == 0) - ret = channel_type_parallel; - if (strncmp(name, "escon", 5) == 0) - ret = channel_type_escon; - } - return ret; -} - -static long -__ctc_check_irb_error(struct ccw_device *cdev, struct irb *irb) -{ - if (!IS_ERR(irb)) - return 0; - - switch (PTR_ERR(irb)) { - case -EIO: - ctc_pr_warn("i/o-error on device %s\n", cdev->dev.bus_id); -// CTC_DBF_TEXT(trace, 2, "ckirberr"); -// CTC_DBF_TEXT_(trace, 2, " rc%d", -EIO); - break; - case -ETIMEDOUT: - ctc_pr_warn("timeout on device %s\n", cdev->dev.bus_id); -// CTC_DBF_TEXT(trace, 2, "ckirberr"); -// CTC_DBF_TEXT_(trace, 2, " rc%d", -ETIMEDOUT); - break; - default: - ctc_pr_warn("unknown error %ld on device %s\n", PTR_ERR(irb), - cdev->dev.bus_id); -// CTC_DBF_TEXT(trace, 2, "ckirberr"); -// CTC_DBF_TEXT(trace, 2, " rc???"); - } - return PTR_ERR(irb); -} - -/** - * Main IRQ handler. - * - * @param cdev The ccw_device the interrupt is for. - * @param intparm interruption parameter. - * @param irb interruption response block. - */ -static void -ctc_irq_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) -{ - struct channel *ch; - struct net_device *dev; - struct ctc_priv *priv; - - DBF_TEXT(trace, 5, __FUNCTION__); - if (__ctc_check_irb_error(cdev, irb)) - return; - - /* Check for unsolicited interrupts. */ - if (!cdev->dev.driver_data) { - ctc_pr_warn("ctc: Got unsolicited irq: %s c-%02x d-%02x\n", - cdev->dev.bus_id, irb->scsw.cstat, - irb->scsw.dstat); - return; - } - - priv = ((struct ccwgroup_device *)cdev->dev.driver_data) - ->dev.driver_data; - - /* Try to extract channel from driver data. */ - if (priv->channel[READ]->cdev == cdev) - ch = priv->channel[READ]; - else if (priv->channel[WRITE]->cdev == cdev) - ch = priv->channel[WRITE]; - else { - ctc_pr_err("ctc: Can't determine channel for interrupt, " - "device %s\n", cdev->dev.bus_id); - return; - } - - dev = (struct net_device *) (ch->netdev); - if (dev == NULL) { - ctc_pr_crit("ctc: ctc_irq_handler dev=NULL bus_id=%s, ch=0x%p\n", - cdev->dev.bus_id, ch); - return; - } - -#ifdef DEBUG - ctc_pr_debug("%s: interrupt for device: %s received c-%02x d-%02x\n", - dev->name, ch->id, irb->scsw.cstat, irb->scsw.dstat); -#endif - - /* Copy interruption response block. */ - memcpy(ch->irb, irb, sizeof(struct irb)); - - /* Check for good subchannel return code, otherwise error message */ - if (ch->irb->scsw.cstat) { - fsm_event(ch->fsm, CH_EVENT_SC_UNKNOWN, ch); - ctc_pr_warn("%s: subchannel check for device: %s - %02x %02x\n", - dev->name, ch->id, ch->irb->scsw.cstat, - ch->irb->scsw.dstat); - return; - } - - /* Check the reason-code of a unit check */ - if (ch->irb->scsw.dstat & DEV_STAT_UNIT_CHECK) { - ccw_unit_check(ch, ch->irb->ecw[0]); - return; - } - if (ch->irb->scsw.dstat & DEV_STAT_BUSY) { - if (ch->irb->scsw.dstat & DEV_STAT_ATTENTION) - fsm_event(ch->fsm, CH_EVENT_ATTNBUSY, ch); - else - fsm_event(ch->fsm, CH_EVENT_BUSY, ch); - return; - } - if (ch->irb->scsw.dstat & DEV_STAT_ATTENTION) { - fsm_event(ch->fsm, CH_EVENT_ATTN, ch); - return; - } - if ((ch->irb->scsw.stctl & SCSW_STCTL_SEC_STATUS) || - (ch->irb->scsw.stctl == SCSW_STCTL_STATUS_PEND) || - (ch->irb->scsw.stctl == - (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND))) - fsm_event(ch->fsm, CH_EVENT_FINSTAT, ch); - else - fsm_event(ch->fsm, CH_EVENT_IRQ, ch); - -} - -/** - * Actions for interface - statemachine. - *****************************************************************************/ - -/** - * Startup channels by sending CH_EVENT_START to each channel. - * - * @param fi An instance of an interface statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from struct net_device * upon call. - */ -static void -dev_action_start(fsm_instance * fi, int event, void *arg) -{ - struct net_device *dev = (struct net_device *) arg; - struct ctc_priv *privptr = dev->priv; - int direction; - - DBF_TEXT(setup, 3, __FUNCTION__); - fsm_deltimer(&privptr->restart_timer); - fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); - for (direction = READ; direction <= WRITE; direction++) { - struct channel *ch = privptr->channel[direction]; - fsm_event(ch->fsm, CH_EVENT_START, ch); - } -} - -/** - * Shutdown channels by sending CH_EVENT_STOP to each channel. - * - * @param fi An instance of an interface statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from struct net_device * upon call. - */ -static void -dev_action_stop(fsm_instance * fi, int event, void *arg) -{ - struct net_device *dev = (struct net_device *) arg; - struct ctc_priv *privptr = dev->priv; - int direction; - - DBF_TEXT(trace, 3, __FUNCTION__); - fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); - for (direction = READ; direction <= WRITE; direction++) { - struct channel *ch = privptr->channel[direction]; - fsm_event(ch->fsm, CH_EVENT_STOP, ch); - } -} -static void -dev_action_restart(fsm_instance *fi, int event, void *arg) -{ - struct net_device *dev = (struct net_device *)arg; - struct ctc_priv *privptr = dev->priv; - - DBF_TEXT(trace, 3, __FUNCTION__); - ctc_pr_debug("%s: Restarting\n", dev->name); - dev_action_stop(fi, event, arg); - fsm_event(privptr->fsm, DEV_EVENT_STOP, dev); - fsm_addtimer(&privptr->restart_timer, CTC_TIMEOUT_5SEC, - DEV_EVENT_START, dev); -} - -/** - * Called from channel statemachine - * when a channel is up and running. - * - * @param fi An instance of an interface statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from struct net_device * upon call. - */ -static void -dev_action_chup(fsm_instance * fi, int event, void *arg) -{ - struct net_device *dev = (struct net_device *) arg; - - DBF_TEXT(trace, 3, __FUNCTION__); - switch (fsm_getstate(fi)) { - case DEV_STATE_STARTWAIT_RXTX: - if (event == DEV_EVENT_RXUP) - fsm_newstate(fi, DEV_STATE_STARTWAIT_TX); - else - fsm_newstate(fi, DEV_STATE_STARTWAIT_RX); - break; - case DEV_STATE_STARTWAIT_RX: - if (event == DEV_EVENT_RXUP) { - fsm_newstate(fi, DEV_STATE_RUNNING); - ctc_pr_info("%s: connected with remote side\n", - dev->name); - ctc_clear_busy(dev); - } - break; - case DEV_STATE_STARTWAIT_TX: - if (event == DEV_EVENT_TXUP) { - fsm_newstate(fi, DEV_STATE_RUNNING); - ctc_pr_info("%s: connected with remote side\n", - dev->name); - ctc_clear_busy(dev); - } - break; - case DEV_STATE_STOPWAIT_TX: - if (event == DEV_EVENT_RXUP) - fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); - break; - case DEV_STATE_STOPWAIT_RX: - if (event == DEV_EVENT_TXUP) - fsm_newstate(fi, DEV_STATE_STOPWAIT_RXTX); - break; - } -} - -/** - * Called from channel statemachine - * when a channel has been shutdown. - * - * @param fi An instance of an interface statemachine. - * @param event The event, just happened. - * @param arg Generic pointer, casted from struct net_device * upon call. - */ -static void -dev_action_chdown(fsm_instance * fi, int event, void *arg) -{ - - DBF_TEXT(trace, 3, __FUNCTION__); - switch (fsm_getstate(fi)) { - case DEV_STATE_RUNNING: - if (event == DEV_EVENT_TXDOWN) - fsm_newstate(fi, DEV_STATE_STARTWAIT_TX); - else - fsm_newstate(fi, DEV_STATE_STARTWAIT_RX); - break; - case DEV_STATE_STARTWAIT_RX: - if (event == DEV_EVENT_TXDOWN) - fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); - break; - case DEV_STATE_STARTWAIT_TX: - if (event == DEV_EVENT_RXDOWN) - fsm_newstate(fi, DEV_STATE_STARTWAIT_RXTX); - break; - case DEV_STATE_STOPWAIT_RXTX: - if (event == DEV_EVENT_TXDOWN) - fsm_newstate(fi, DEV_STATE_STOPWAIT_RX); - else - fsm_newstate(fi, DEV_STATE_STOPWAIT_TX); - break; - case DEV_STATE_STOPWAIT_RX: - if (event == DEV_EVENT_RXDOWN) - fsm_newstate(fi, DEV_STATE_STOPPED); - break; - case DEV_STATE_STOPWAIT_TX: - if (event == DEV_EVENT_TXDOWN) - fsm_newstate(fi, DEV_STATE_STOPPED); - break; - } -} - -static const fsm_node dev_fsm[] = { - {DEV_STATE_STOPPED, DEV_EVENT_START, dev_action_start}, - - {DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_START, dev_action_start }, - {DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_RXDOWN, dev_action_chdown }, - {DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_TXDOWN, dev_action_chdown }, - {DEV_STATE_STOPWAIT_RXTX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_STOPWAIT_RX, DEV_EVENT_START, dev_action_start }, - {DEV_STATE_STOPWAIT_RX, DEV_EVENT_RXUP, dev_action_chup }, - {DEV_STATE_STOPWAIT_RX, DEV_EVENT_TXUP, dev_action_chup }, - {DEV_STATE_STOPWAIT_RX, DEV_EVENT_RXDOWN, dev_action_chdown }, - {DEV_STATE_STOPWAIT_RX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_STOPWAIT_TX, DEV_EVENT_START, dev_action_start }, - {DEV_STATE_STOPWAIT_TX, DEV_EVENT_RXUP, dev_action_chup }, - {DEV_STATE_STOPWAIT_TX, DEV_EVENT_TXUP, dev_action_chup }, - {DEV_STATE_STOPWAIT_TX, DEV_EVENT_TXDOWN, dev_action_chdown }, - {DEV_STATE_STOPWAIT_TX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_STOP, dev_action_stop }, - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_TXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RXDOWN, dev_action_chdown }, - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_TXDOWN, dev_action_chdown }, - {DEV_STATE_STARTWAIT_RXTX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_STARTWAIT_TX, DEV_EVENT_STOP, dev_action_stop }, - {DEV_STATE_STARTWAIT_TX, DEV_EVENT_RXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_TX, DEV_EVENT_TXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_TX, DEV_EVENT_RXDOWN, dev_action_chdown }, - {DEV_STATE_STARTWAIT_TX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_STARTWAIT_RX, DEV_EVENT_STOP, dev_action_stop }, - {DEV_STATE_STARTWAIT_RX, DEV_EVENT_RXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_RX, DEV_EVENT_TXUP, dev_action_chup }, - {DEV_STATE_STARTWAIT_RX, DEV_EVENT_TXDOWN, dev_action_chdown }, - {DEV_STATE_STARTWAIT_RX, DEV_EVENT_RESTART, dev_action_restart }, - - {DEV_STATE_RUNNING, DEV_EVENT_STOP, dev_action_stop }, - {DEV_STATE_RUNNING, DEV_EVENT_RXDOWN, dev_action_chdown }, - {DEV_STATE_RUNNING, DEV_EVENT_TXDOWN, dev_action_chdown }, - {DEV_STATE_RUNNING, DEV_EVENT_TXUP, fsm_action_nop }, - {DEV_STATE_RUNNING, DEV_EVENT_RXUP, fsm_action_nop }, - {DEV_STATE_RUNNING, DEV_EVENT_RESTART, dev_action_restart }, -}; - -static const int DEV_FSM_LEN = sizeof (dev_fsm) / sizeof (fsm_node); - -/** - * Transmit a packet. - * This is a helper function for ctc_tx(). - * - * @param ch Channel to be used for sending. - * @param skb Pointer to struct sk_buff of packet to send. - * The linklevel header has already been set up - * by ctc_tx(). - * - * @return 0 on success, -ERRNO on failure. (Never fails.) - */ -static int -transmit_skb(struct channel *ch, struct sk_buff *skb) -{ - unsigned long saveflags; - struct ll_header header; - int rc = 0; - - DBF_TEXT(trace, 5, __FUNCTION__); - /* we need to acquire the lock for testing the state - * otherwise we can have an IRQ changing the state to - * TXIDLE after the test but before acquiring the lock. - */ - spin_lock_irqsave(&ch->collect_lock, saveflags); - if (fsm_getstate(ch->fsm) != CH_STATE_TXIDLE) { - int l = skb->len + LL_HEADER_LENGTH; - - if (ch->collect_len + l > ch->max_bufsize - 2) { - spin_unlock_irqrestore(&ch->collect_lock, saveflags); - return -EBUSY; - } else { - atomic_inc(&skb->users); - header.length = l; - header.type = skb->protocol; - header.unused = 0; - memcpy(skb_push(skb, LL_HEADER_LENGTH), &header, - LL_HEADER_LENGTH); - skb_queue_tail(&ch->collect_queue, skb); - ch->collect_len += l; - } - spin_unlock_irqrestore(&ch->collect_lock, saveflags); - } else { - __u16 block_len; - int ccw_idx; - struct sk_buff *nskb; - unsigned long hi; - spin_unlock_irqrestore(&ch->collect_lock, saveflags); - /** - * Protect skb against beeing free'd by upper - * layers. - */ - atomic_inc(&skb->users); - ch->prof.txlen += skb->len; - header.length = skb->len + LL_HEADER_LENGTH; - header.type = skb->protocol; - header.unused = 0; - memcpy(skb_push(skb, LL_HEADER_LENGTH), &header, - LL_HEADER_LENGTH); - block_len = skb->len + 2; - *((__u16 *) skb_push(skb, 2)) = block_len; - - /** - * IDAL support in CTC is broken, so we have to - * care about skb's above 2G ourselves. - */ - hi = ((unsigned long)skb_tail_pointer(skb) + - LL_HEADER_LENGTH) >> 31; - if (hi) { - nskb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); - if (!nskb) { - atomic_dec(&skb->users); - skb_pull(skb, LL_HEADER_LENGTH + 2); - ctc_clear_busy(ch->netdev); - return -ENOMEM; - } else { - memcpy(skb_put(nskb, skb->len), - skb->data, skb->len); - atomic_inc(&nskb->users); - atomic_dec(&skb->users); - dev_kfree_skb_irq(skb); - skb = nskb; - } - } - - ch->ccw[4].count = block_len; - if (set_normalized_cda(&ch->ccw[4], skb->data)) { - /** - * idal allocation failed, try via copying to - * trans_skb. trans_skb usually has a pre-allocated - * idal. - */ - if (ctc_checkalloc_buffer(ch, 1)) { - /** - * Remove our header. It gets added - * again on retransmit. - */ - atomic_dec(&skb->users); - skb_pull(skb, LL_HEADER_LENGTH + 2); - ctc_clear_busy(ch->netdev); - return -EBUSY; - } - - skb_reset_tail_pointer(ch->trans_skb); - ch->trans_skb->len = 0; - ch->ccw[1].count = skb->len; - skb_copy_from_linear_data(skb, skb_put(ch->trans_skb, - skb->len), - skb->len); - atomic_dec(&skb->users); - dev_kfree_skb_irq(skb); - ccw_idx = 0; - } else { - skb_queue_tail(&ch->io_queue, skb); - ccw_idx = 3; - } - ch->retry = 0; - fsm_newstate(ch->fsm, CH_STATE_TX); - fsm_addtimer(&ch->timer, CTC_TIMEOUT_5SEC, CH_EVENT_TIMER, ch); - spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags); - ch->prof.send_stamp = current_kernel_time(); - rc = ccw_device_start(ch->cdev, &ch->ccw[ccw_idx], - (unsigned long) ch, 0xff, 0); - spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags); - if (ccw_idx == 3) - ch->prof.doios_single++; - if (rc != 0) { - fsm_deltimer(&ch->timer); - ccw_check_return_code(ch, rc, "single skb TX"); - if (ccw_idx == 3) - skb_dequeue_tail(&ch->io_queue); - /** - * Remove our header. It gets added - * again on retransmit. - */ - skb_pull(skb, LL_HEADER_LENGTH + 2); - } else { - if (ccw_idx == 0) { - struct net_device *dev = ch->netdev; - struct ctc_priv *privptr = dev->priv; - privptr->stats.tx_packets++; - privptr->stats.tx_bytes += - skb->len - LL_HEADER_LENGTH; - } - } - } - - ctc_clear_busy(ch->netdev); - return rc; -} - -/** - * Interface API for upper network layers - *****************************************************************************/ - -/** - * Open an interface. - * Called from generic network layer when ifconfig up is run. - * - * @param dev Pointer to interface struct. - * - * @return 0 on success, -ERRNO on failure. (Never fails.) - */ -static int -ctc_open(struct net_device * dev) -{ - DBF_TEXT(trace, 5, __FUNCTION__); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_START, dev); - return 0; -} - -/** - * Close an interface. - * Called from generic network layer when ifconfig down is run. - * - * @param dev Pointer to interface struct. - * - * @return 0 on success, -ERRNO on failure. (Never fails.) - */ -static int -ctc_close(struct net_device * dev) -{ - DBF_TEXT(trace, 5, __FUNCTION__); - fsm_event(((struct ctc_priv *) dev->priv)->fsm, DEV_EVENT_STOP, dev); - return 0; -} - -/** - * Start transmission of a packet. - * Called from generic network device layer. - * - * @param skb Pointer to buffer containing the packet. - * @param dev Pointer to interface struct. - * - * @return 0 if packet consumed, !0 if packet rejected. - * Note: If we return !0, then the packet is free'd by - * the generic network layer. - */ -static int -ctc_tx(struct sk_buff *skb, struct net_device * dev) -{ - int rc = 0; - struct ctc_priv *privptr = (struct ctc_priv *) dev->priv; - - DBF_TEXT(trace, 5, __FUNCTION__); - /** - * Some sanity checks ... - */ - if (skb == NULL) { - ctc_pr_warn("%s: NULL sk_buff passed\n", dev->name); - privptr->stats.tx_dropped++; - return 0; - } - if (skb_headroom(skb) < (LL_HEADER_LENGTH + 2)) { - ctc_pr_warn("%s: Got sk_buff with head room < %ld bytes\n", - dev->name, LL_HEADER_LENGTH + 2); - dev_kfree_skb(skb); - privptr->stats.tx_dropped++; - return 0; - } - - /** - * If channels are not running, try to restart them - * and throw away packet. - */ - if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) { - fsm_event(privptr->fsm, DEV_EVENT_START, dev); - dev_kfree_skb(skb); - privptr->stats.tx_dropped++; - privptr->stats.tx_errors++; - privptr->stats.tx_carrier_errors++; - return 0; - } - - if (ctc_test_and_set_busy(dev)) - return -EBUSY; - - dev->trans_start = jiffies; - if (transmit_skb(privptr->channel[WRITE], skb) != 0) - rc = 1; - return rc; -} - -/** - * Sets MTU of an interface. - * - * @param dev Pointer to interface struct. - * @param new_mtu The new MTU to use for this interface. - * - * @return 0 on success, -EINVAL if MTU is out of valid range. - * (valid range is 576 .. 65527). If VM is on the - * remote side, maximum MTU is 32760, however this is - * not checked here. - */ -static int -ctc_change_mtu(struct net_device * dev, int new_mtu) -{ - struct ctc_priv *privptr = (struct ctc_priv *) dev->priv; - - DBF_TEXT(trace, 3, __FUNCTION__); - if ((new_mtu < 576) || (new_mtu > 65527) || - (new_mtu > (privptr->channel[READ]->max_bufsize - - LL_HEADER_LENGTH - 2))) - return -EINVAL; - dev->mtu = new_mtu; - dev->hard_header_len = LL_HEADER_LENGTH + 2; - return 0; -} - -/** - * Returns interface statistics of a device. - * - * @param dev Pointer to interface struct. - * - * @return Pointer to stats struct of this interface. - */ -static struct net_device_stats * -ctc_stats(struct net_device * dev) -{ - return &((struct ctc_priv *) dev->priv)->stats; -} - -/* - * sysfs attributes - */ - -static ssize_t -buffer_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct ctc_priv *priv; - - priv = dev->driver_data; - if (!priv) - return -ENODEV; - return sprintf(buf, "%d\n", - priv->buffer_size); -} - -static ssize_t -buffer_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct ctc_priv *priv; - struct net_device *ndev; - int bs1; - char buffer[16]; - - DBF_TEXT(trace, 3, __FUNCTION__); - DBF_TEXT(trace, 3, buf); - priv = dev->driver_data; - if (!priv) { - DBF_TEXT(trace, 3, "bfnopriv"); - return -ENODEV; - } - - sscanf(buf, "%u", &bs1); - if (bs1 > CTC_BUFSIZE_LIMIT) - goto einval; - if (bs1 < (576 + LL_HEADER_LENGTH + 2)) - goto einval; - priv->buffer_size = bs1; // just to overwrite the default - - ndev = priv->channel[READ]->netdev; - if (!ndev) { - DBF_TEXT(trace, 3, "bfnondev"); - return -ENODEV; - } - - if ((ndev->flags & IFF_RUNNING) && - (bs1 < (ndev->mtu + LL_HEADER_LENGTH + 2))) - goto einval; - - priv->channel[READ]->max_bufsize = bs1; - priv->channel[WRITE]->max_bufsize = bs1; - if (!(ndev->flags & IFF_RUNNING)) - ndev->mtu = bs1 - LL_HEADER_LENGTH - 2; - priv->channel[READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; - priv->channel[WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; - - sprintf(buffer, "%d",priv->buffer_size); - DBF_TEXT(trace, 3, buffer); - return count; - -einval: - DBF_TEXT(trace, 3, "buff_err"); - return -EINVAL; -} - -static ssize_t -loglevel_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", loglevel); -} - -static ssize_t -loglevel_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - int ll1; - - DBF_TEXT(trace, 5, __FUNCTION__); - sscanf(buf, "%i", &ll1); - - if ((ll1 > CTC_LOGLEVEL_MAX) || (ll1 < 0)) - return -EINVAL; - loglevel = ll1; - return count; -} - -static void -ctc_print_statistics(struct ctc_priv *priv) -{ - char *sbuf; - char *p; - - DBF_TEXT(trace, 4, __FUNCTION__); - if (!priv) - return; - sbuf = kmalloc(2048, GFP_KERNEL); - if (sbuf == NULL) - return; - p = sbuf; - - p += sprintf(p, " Device FSM state: %s\n", - fsm_getstate_str(priv->fsm)); - p += sprintf(p, " RX channel FSM state: %s\n", - fsm_getstate_str(priv->channel[READ]->fsm)); - p += sprintf(p, " TX channel FSM state: %s\n", - fsm_getstate_str(priv->channel[WRITE]->fsm)); - p += sprintf(p, " Max. TX buffer used: %ld\n", - priv->channel[WRITE]->prof.maxmulti); - p += sprintf(p, " Max. chained SKBs: %ld\n", - priv->channel[WRITE]->prof.maxcqueue); - p += sprintf(p, " TX single write ops: %ld\n", - priv->channel[WRITE]->prof.doios_single); - p += sprintf(p, " TX multi write ops: %ld\n", - priv->channel[WRITE]->prof.doios_multi); - p += sprintf(p, " Netto bytes written: %ld\n", - priv->channel[WRITE]->prof.txlen); - p += sprintf(p, " Max. TX IO-time: %ld\n", - priv->channel[WRITE]->prof.tx_time); - - ctc_pr_debug("Statistics for %s:\n%s", - priv->channel[WRITE]->netdev->name, sbuf); - kfree(sbuf); - return; -} - -static ssize_t -stats_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct ctc_priv *priv = dev->driver_data; - if (!priv) - return -ENODEV; - ctc_print_statistics(priv); - return sprintf(buf, "0\n"); -} - -static ssize_t -stats_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct ctc_priv *priv = dev->driver_data; - if (!priv) - return -ENODEV; - /* Reset statistics */ - memset(&priv->channel[WRITE]->prof, 0, - sizeof(priv->channel[WRITE]->prof)); - return count; -} - -static void -ctc_netdev_unregister(struct net_device * dev) -{ - struct ctc_priv *privptr; - - if (!dev) - return; - privptr = (struct ctc_priv *) dev->priv; - unregister_netdev(dev); -} - -static int -ctc_netdev_register(struct net_device * dev) -{ - return register_netdev(dev); -} - -static void -ctc_free_netdevice(struct net_device * dev, int free_dev) -{ - struct ctc_priv *privptr; - if (!dev) - return; - privptr = dev->priv; - if (privptr) { - if (privptr->fsm) - kfree_fsm(privptr->fsm); - kfree(privptr); - } -#ifdef MODULE - if (free_dev) - free_netdev(dev); -#endif -} - -static ssize_t -ctc_proto_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct ctc_priv *priv; - - priv = dev->driver_data; - if (!priv) - return -ENODEV; - - return sprintf(buf, "%d\n", priv->protocol); -} - -static ssize_t -ctc_proto_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct ctc_priv *priv; - int value; - - DBF_TEXT(trace, 3, __FUNCTION__); - pr_debug("%s() called\n", __FUNCTION__); - - priv = dev->driver_data; - if (!priv) - return -ENODEV; - sscanf(buf, "%u", &value); - if (!((value == CTC_PROTO_S390) || - (value == CTC_PROTO_LINUX) || - (value == CTC_PROTO_OS390))) - return -EINVAL; - priv->protocol = value; - - return count; -} - -static ssize_t -ctc_type_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct ccwgroup_device *cgdev; - - cgdev = to_ccwgroupdev(dev); - if (!cgdev) - return -ENODEV; - - return sprintf(buf, "%s\n", cu3088_type[cgdev->cdev[0]->id.driver_info]); -} - -static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write); -static DEVICE_ATTR(protocol, 0644, ctc_proto_show, ctc_proto_store); -static DEVICE_ATTR(type, 0444, ctc_type_show, NULL); - -static DEVICE_ATTR(loglevel, 0644, loglevel_show, loglevel_write); -static DEVICE_ATTR(stats, 0644, stats_show, stats_write); - -static struct attribute *ctc_attr[] = { - &dev_attr_protocol.attr, - &dev_attr_type.attr, - &dev_attr_buffer.attr, - NULL, -}; - -static struct attribute_group ctc_attr_group = { - .attrs = ctc_attr, -}; - -static int -ctc_add_attributes(struct device *dev) -{ - int rc; - - rc = device_create_file(dev, &dev_attr_loglevel); - if (rc) - goto out; - rc = device_create_file(dev, &dev_attr_stats); - if (!rc) - goto out; - device_remove_file(dev, &dev_attr_loglevel); -out: - return rc; -} - -static void -ctc_remove_attributes(struct device *dev) -{ - device_remove_file(dev, &dev_attr_stats); - device_remove_file(dev, &dev_attr_loglevel); -} - -static int -ctc_add_files(struct device *dev) -{ - pr_debug("%s() called\n", __FUNCTION__); - - return sysfs_create_group(&dev->kobj, &ctc_attr_group); -} - -static void -ctc_remove_files(struct device *dev) -{ - pr_debug("%s() called\n", __FUNCTION__); - - sysfs_remove_group(&dev->kobj, &ctc_attr_group); -} - -/** - * Add ctc specific attributes. - * Add ctc private data. - * - * @param cgdev pointer to ccwgroup_device just added - * - * @returns 0 on success, !0 on failure. - */ -static int -ctc_probe_device(struct ccwgroup_device *cgdev) -{ - struct ctc_priv *priv; - int rc; - char buffer[16]; - - pr_debug("%s() called\n", __FUNCTION__); - DBF_TEXT(setup, 3, __FUNCTION__); - - if (!get_device(&cgdev->dev)) - return -ENODEV; - - priv = kzalloc(sizeof(struct ctc_priv), GFP_KERNEL); - if (!priv) { - ctc_pr_err("%s: Out of memory\n", __func__); - put_device(&cgdev->dev); - return -ENOMEM; - } - - rc = ctc_add_files(&cgdev->dev); - if (rc) { - kfree(priv); - put_device(&cgdev->dev); - return rc; - } - priv->buffer_size = CTC_BUFSIZE_DEFAULT; - cgdev->cdev[0]->handler = ctc_irq_handler; - cgdev->cdev[1]->handler = ctc_irq_handler; - cgdev->dev.driver_data = priv; - - sprintf(buffer, "%p", priv); - DBF_TEXT(data, 3, buffer); - - sprintf(buffer, "%u", (unsigned int)sizeof(struct ctc_priv)); - DBF_TEXT(data, 3, buffer); - - sprintf(buffer, "%p", &channels); - DBF_TEXT(data, 3, buffer); - - sprintf(buffer, "%u", (unsigned int)sizeof(struct channel)); - DBF_TEXT(data, 3, buffer); - - return 0; -} - -/** - * Device setup function called by alloc_netdev(). - * - * @param dev Device to be setup. - */ -void ctc_init_netdevice(struct net_device * dev) -{ - DBF_TEXT(setup, 3, __FUNCTION__); - - if (dev->mtu == 0) - dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2; - dev->hard_start_xmit = ctc_tx; - dev->open = ctc_open; - dev->stop = ctc_close; - dev->get_stats = ctc_stats; - dev->change_mtu = ctc_change_mtu; - dev->hard_header_len = LL_HEADER_LENGTH + 2; - dev->addr_len = 0; - dev->type = ARPHRD_SLIP; - dev->tx_queue_len = 100; - dev->flags = IFF_POINTOPOINT | IFF_NOARP; -} - - -/** - * - * Setup an interface. - * - * @param cgdev Device to be setup. - * - * @returns 0 on success, !0 on failure. - */ -static int -ctc_new_device(struct ccwgroup_device *cgdev) -{ - char read_id[CTC_ID_SIZE]; - char write_id[CTC_ID_SIZE]; - int direction; - enum channel_types type; - struct ctc_priv *privptr; - struct net_device *dev; - int ret; - char buffer[16]; - - pr_debug("%s() called\n", __FUNCTION__); - DBF_TEXT(setup, 3, __FUNCTION__); - - privptr = cgdev->dev.driver_data; - if (!privptr) - return -ENODEV; - - sprintf(buffer, "%d", privptr->buffer_size); - DBF_TEXT(setup, 3, buffer); - - type = get_channel_type(&cgdev->cdev[0]->id); - - snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id); - snprintf(write_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id); - - if (add_channel(cgdev->cdev[0], type)) - return -ENOMEM; - if (add_channel(cgdev->cdev[1], type)) - return -ENOMEM; - - ret = ccw_device_set_online(cgdev->cdev[0]); - if (ret != 0) { - printk(KERN_WARNING - "ccw_device_set_online (cdev[0]) failed with ret = %d\n", ret); - } - - ret = ccw_device_set_online(cgdev->cdev[1]); - if (ret != 0) { - printk(KERN_WARNING - "ccw_device_set_online (cdev[1]) failed with ret = %d\n", ret); - } - - dev = alloc_netdev(0, "ctc%d", ctc_init_netdevice); - if (!dev) { - ctc_pr_warn("ctc_init_netdevice failed\n"); - goto out; - } - dev->priv = privptr; - - privptr->fsm = init_fsm("ctcdev", dev_state_names, - dev_event_names, CTC_NR_DEV_STATES, CTC_NR_DEV_EVENTS, - dev_fsm, DEV_FSM_LEN, GFP_KERNEL); - if (privptr->fsm == NULL) { - free_netdev(dev); - goto out; - } - fsm_newstate(privptr->fsm, DEV_STATE_STOPPED); - fsm_settimer(privptr->fsm, &privptr->restart_timer); - - for (direction = READ; direction <= WRITE; direction++) { - privptr->channel[direction] = - channel_get(type, direction == READ ? read_id : write_id, - direction); - if (privptr->channel[direction] == NULL) { - if (direction == WRITE) - channel_free(privptr->channel[READ]); - - ctc_free_netdevice(dev, 1); - goto out; - } - privptr->channel[direction]->netdev = dev; - privptr->channel[direction]->protocol = privptr->protocol; - privptr->channel[direction]->max_bufsize = privptr->buffer_size; - } - /* sysfs magic */ - SET_NETDEV_DEV(dev, &cgdev->dev); - - if (ctc_netdev_register(dev) != 0) { - ctc_free_netdevice(dev, 1); - goto out; - } - - if (ctc_add_attributes(&cgdev->dev)) { - ctc_netdev_unregister(dev); - dev->priv = NULL; - ctc_free_netdevice(dev, 1); - goto out; - } - - strlcpy(privptr->fsm->name, dev->name, sizeof (privptr->fsm->name)); - - print_banner(); - - ctc_pr_info("%s: read: %s, write: %s, proto: %d\n", - dev->name, privptr->channel[READ]->id, - privptr->channel[WRITE]->id, privptr->protocol); - - return 0; -out: - ccw_device_set_offline(cgdev->cdev[1]); - ccw_device_set_offline(cgdev->cdev[0]); - - return -ENODEV; -} - -/** - * Shutdown an interface. - * - * @param cgdev Device to be shut down. - * - * @returns 0 on success, !0 on failure. - */ -static int -ctc_shutdown_device(struct ccwgroup_device *cgdev) -{ - struct ctc_priv *priv; - struct net_device *ndev; - - DBF_TEXT(setup, 3, __FUNCTION__); - pr_debug("%s() called\n", __FUNCTION__); - - - priv = cgdev->dev.driver_data; - ndev = NULL; - if (!priv) - return -ENODEV; - - if (priv->channel[READ]) { - ndev = priv->channel[READ]->netdev; - - /* Close the device */ - ctc_close(ndev); - ndev->flags &=~IFF_RUNNING; - - ctc_remove_attributes(&cgdev->dev); - - channel_free(priv->channel[READ]); - } - if (priv->channel[WRITE]) - channel_free(priv->channel[WRITE]); - - if (ndev) { - ctc_netdev_unregister(ndev); - ndev->priv = NULL; - ctc_free_netdevice(ndev, 1); - } - - if (priv->fsm) - kfree_fsm(priv->fsm); - - ccw_device_set_offline(cgdev->cdev[1]); - ccw_device_set_offline(cgdev->cdev[0]); - - if (priv->channel[READ]) - channel_remove(priv->channel[READ]); - if (priv->channel[WRITE]) - channel_remove(priv->channel[WRITE]); - priv->channel[READ] = priv->channel[WRITE] = NULL; - - return 0; - -} - -static void -ctc_remove_device(struct ccwgroup_device *cgdev) -{ - struct ctc_priv *priv; - - pr_debug("%s() called\n", __FUNCTION__); - DBF_TEXT(setup, 3, __FUNCTION__); - - priv = cgdev->dev.driver_data; - if (!priv) - return; - if (cgdev->state == CCWGROUP_ONLINE) - ctc_shutdown_device(cgdev); - ctc_remove_files(&cgdev->dev); - cgdev->dev.driver_data = NULL; - kfree(priv); - put_device(&cgdev->dev); -} - -static struct ccwgroup_driver ctc_group_driver = { - .owner = THIS_MODULE, - .name = "ctc", - .max_slaves = 2, - .driver_id = 0xC3E3C3, - .probe = ctc_probe_device, - .remove = ctc_remove_device, - .set_online = ctc_new_device, - .set_offline = ctc_shutdown_device, -}; - -/** - * Module related routines - *****************************************************************************/ - -/** - * Prepare to be unloaded. Free IRQ's and release all resources. - * This is called just before this module is unloaded. It is - * not called, if the usage count is !0, so we don't need to check - * for that. - */ -static void __exit -ctc_exit(void) -{ - DBF_TEXT(setup, 3, __FUNCTION__); - unregister_cu3088_discipline(&ctc_group_driver); - ctc_unregister_dbf_views(); - ctc_pr_info("CTC driver unloaded\n"); -} - -/** - * Initialize module. - * This is called just after the module is loaded. - * - * @return 0 on success, !0 on error. - */ -static int __init -ctc_init(void) -{ - int ret = 0; - - loglevel = CTC_LOGLEVEL_DEFAULT; - - DBF_TEXT(setup, 3, __FUNCTION__); - - print_banner(); - - ret = ctc_register_dbf_views(); - if (ret){ - ctc_pr_crit("ctc_init failed with ctc_register_dbf_views rc = %d\n", ret); - return ret; - } - ret = register_cu3088_discipline(&ctc_group_driver); - if (ret) { - ctc_unregister_dbf_views(); - } - return ret; -} - -module_init(ctc_init); -module_exit(ctc_exit); - -/* --- This is the END my friend --- */ diff --git a/drivers/s390/net/ctcmain.h b/drivers/s390/net/ctcmain.h deleted file mode 100644 index 7f305d1..0000000 --- a/drivers/s390/net/ctcmain.h +++ /dev/null @@ -1,270 +0,0 @@ -/* - * CTC / ESCON network driver - * - * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com) - Peter Tiedemann (ptiedem@de.ibm.com) - * - * - * Documentation used: - * - Principles of Operation (IBM doc#: SA22-7201-06) - * - Common IO/-Device Commands and Self Description (IBM doc#: SA22-7204-02) - * - Common IO/-Device Commands and Self Description (IBM doc#: SN22-5535) - * - ESCON Channel-to-Channel Adapter (IBM doc#: SA22-7203-00) - * - ESCON I/O Interface (IBM doc#: SA22-7202-029 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _CTCMAIN_H_ -#define _CTCMAIN_H_ - -#include -#include - -#include -#include - -#include "fsm.h" -#include "cu3088.h" - - -/** - * CCW commands, used in this driver. - */ -#define CCW_CMD_WRITE 0x01 -#define CCW_CMD_READ 0x02 -#define CCW_CMD_SET_EXTENDED 0xc3 -#define CCW_CMD_PREPARE 0xe3 - -#define CTC_PROTO_S390 0 -#define CTC_PROTO_LINUX 1 -#define CTC_PROTO_OS390 3 - -#define CTC_BUFSIZE_LIMIT 65535 -#define CTC_BUFSIZE_DEFAULT 32768 - -#define CTC_TIMEOUT_5SEC 5000 - -#define CTC_INITIAL_BLOCKLEN 2 - -#define READ 0 -#define WRITE 1 - -#define CTC_ID_SIZE BUS_ID_SIZE+3 - - -struct ctc_profile { - unsigned long maxmulti; - unsigned long maxcqueue; - unsigned long doios_single; - unsigned long doios_multi; - unsigned long txlen; - unsigned long tx_time; - struct timespec send_stamp; -}; - -/** - * Definition of one channel - */ -struct channel { - - /** - * Pointer to next channel in list. - */ - struct channel *next; - char id[CTC_ID_SIZE]; - struct ccw_device *cdev; - - /** - * Type of this channel. - * CTC/A or Escon for valid channels. - */ - enum channel_types type; - - /** - * Misc. flags. See CHANNEL_FLAGS_... below - */ - __u32 flags; - - /** - * The protocol of this channel - */ - __u16 protocol; - - /** - * I/O and irq related stuff - */ - struct ccw1 *ccw; - struct irb *irb; - - /** - * RX/TX buffer size - */ - int max_bufsize; - - /** - * Transmit/Receive buffer. - */ - struct sk_buff *trans_skb; - - /** - * Universal I/O queue. - */ - struct sk_buff_head io_queue; - - /** - * TX queue for collecting skb's during busy. - */ - struct sk_buff_head collect_queue; - - /** - * Amount of data in collect_queue. - */ - int collect_len; - - /** - * spinlock for collect_queue and collect_len - */ - spinlock_t collect_lock; - - /** - * Timer for detecting unresposive - * I/O operations. - */ - fsm_timer timer; - - /** - * Retry counter for misc. operations. - */ - int retry; - - /** - * The finite state machine of this channel - */ - fsm_instance *fsm; - - /** - * The corresponding net_device this channel - * belongs to. - */ - struct net_device *netdev; - - struct ctc_profile prof; - - unsigned char *trans_skb_data; - - __u16 logflags; -}; - -#define CHANNEL_FLAGS_READ 0 -#define CHANNEL_FLAGS_WRITE 1 -#define CHANNEL_FLAGS_INUSE 2 -#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4 -#define CHANNEL_FLAGS_FAILED 8 -#define CHANNEL_FLAGS_WAITIRQ 16 -#define CHANNEL_FLAGS_RWMASK 1 -#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK) - -#define LOG_FLAG_ILLEGALPKT 1 -#define LOG_FLAG_ILLEGALSIZE 2 -#define LOG_FLAG_OVERRUN 4 -#define LOG_FLAG_NOMEM 8 - -#define CTC_LOGLEVEL_INFO 1 -#define CTC_LOGLEVEL_NOTICE 2 -#define CTC_LOGLEVEL_WARN 4 -#define CTC_LOGLEVEL_EMERG 8 -#define CTC_LOGLEVEL_ERR 16 -#define CTC_LOGLEVEL_DEBUG 32 -#define CTC_LOGLEVEL_CRIT 64 - -#define CTC_LOGLEVEL_DEFAULT \ -(CTC_LOGLEVEL_INFO | CTC_LOGLEVEL_NOTICE | CTC_LOGLEVEL_WARN | CTC_LOGLEVEL_CRIT) - -#define CTC_LOGLEVEL_MAX ((CTC_LOGLEVEL_CRIT<<1)-1) - -#define ctc_pr_debug(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_DEBUG) printk(KERN_DEBUG fmt,##arg); } while (0) - -#define ctc_pr_info(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_INFO) printk(KERN_INFO fmt,##arg); } while (0) - -#define ctc_pr_notice(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_NOTICE) printk(KERN_NOTICE fmt,##arg); } while (0) - -#define ctc_pr_warn(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_WARN) printk(KERN_WARNING fmt,##arg); } while (0) - -#define ctc_pr_emerg(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_EMERG) printk(KERN_EMERG fmt,##arg); } while (0) - -#define ctc_pr_err(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_ERR) printk(KERN_ERR fmt,##arg); } while (0) - -#define ctc_pr_crit(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_CRIT) printk(KERN_CRIT fmt,##arg); } while (0) - -struct ctc_priv { - struct net_device_stats stats; - unsigned long tbusy; - /** - * The finite state machine of this interface. - */ - fsm_instance *fsm; - /** - * The protocol of this device - */ - __u16 protocol; - /** - * Timer for restarting after I/O Errors - */ - fsm_timer restart_timer; - - int buffer_size; - - struct channel *channel[2]; -}; - -/** - * Definition of our link level header. - */ -struct ll_header { - __u16 length; - __u16 type; - __u16 unused; -}; -#define LL_HEADER_LENGTH (sizeof(struct ll_header)) - -/** - * Compatibility macros for busy handling - * of network devices. - */ -static __inline__ void -ctc_clear_busy(struct net_device * dev) -{ - clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy)); - netif_wake_queue(dev); -} - -static __inline__ int -ctc_test_and_set_busy(struct net_device * dev) -{ - netif_stop_queue(dev); - return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy); -} - -#endif -- cgit v1.1 From 4a71df50047f0db65ea09b1be155852e81a45eba Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 15 Feb 2008 09:19:42 +0100 Subject: qeth: new qeth device driver List of major changes and improvements: no manipulation of the global ARP constructor clean code split into core, layer 2 and layer 3 functionality better exploitation of the ethtool interface better representation of the various hardware capabilities fix packet socket support (tcpdump), no fake_ll required osasnmpd notification via udev events coding style and beautification Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/Kconfig | 31 +- drivers/s390/net/Makefile | 7 +- drivers/s390/net/qeth_core.h | 916 ++++++++ drivers/s390/net/qeth_core_main.c | 4540 +++++++++++++++++++++++++++++++++++++ drivers/s390/net/qeth_core_mpc.c | 266 +++ drivers/s390/net/qeth_core_mpc.h | 566 +++++ drivers/s390/net/qeth_core_offl.c | 701 ++++++ drivers/s390/net/qeth_core_offl.h | 76 + drivers/s390/net/qeth_core_sys.c | 651 ++++++ drivers/s390/net/qeth_l2_main.c | 1242 ++++++++++ drivers/s390/net/qeth_l3.h | 76 + drivers/s390/net/qeth_l3_main.c | 3388 +++++++++++++++++++++++++++ drivers/s390/net/qeth_l3_sys.c | 1051 +++++++++ 13 files changed, 13495 insertions(+), 16 deletions(-) create mode 100644 drivers/s390/net/qeth_core.h create mode 100644 drivers/s390/net/qeth_core_main.c create mode 100644 drivers/s390/net/qeth_core_mpc.c create mode 100644 drivers/s390/net/qeth_core_mpc.h create mode 100644 drivers/s390/net/qeth_core_offl.c create mode 100644 drivers/s390/net/qeth_core_offl.h create mode 100644 drivers/s390/net/qeth_core_sys.c create mode 100644 drivers/s390/net/qeth_l2_main.c create mode 100644 drivers/s390/net/qeth_l3.h create mode 100644 drivers/s390/net/qeth_l3_main.c create mode 100644 drivers/s390/net/qeth_l3_sys.c (limited to 'drivers') diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index 773f5a6..a7745c8 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -67,23 +67,26 @@ config QETH To compile this driver as a module, choose M. The module name is qeth.ko. +config QETH_L2 + tristate "qeth layer 2 device support" + depends on QETH + help + Select this option to be able to run qeth devices in layer 2 mode. + To compile as a module, choose M. The module name is qeth_l2.ko. + If unsure, choose y. -comment "Gigabit Ethernet default settings" - depends on QETH +config QETH_L3 + tristate "qeth layer 3 device support" + depends on QETH + help + Select this option to be able to run qeth devices in layer 3 mode. + To compile as a module choose M. The module name is qeth_l3.ko. + If unsure, choose Y. config QETH_IPV6 - bool "IPv6 support for gigabit ethernet" - depends on (QETH = IPV6) || (QETH && IPV6 = 'y') - help - If CONFIG_QETH is switched on, this option will include IPv6 - support in the qeth device driver. - -config QETH_VLAN - bool "VLAN support for gigabit ethernet" - depends on (QETH = VLAN_8021Q) || (QETH && VLAN_8021Q = 'y') - help - If CONFIG_QETH is switched on, this option will include IEEE - 802.1q VLAN support in the qeth device driver. + bool + depends on (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y') + default y config CCWGROUP tristate diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile index f6d189a..6382c04 100644 --- a/drivers/s390/net/Makefile +++ b/drivers/s390/net/Makefile @@ -8,6 +8,9 @@ obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o obj-$(CONFIG_SMSGIUCV) += smsgiucv.o obj-$(CONFIG_LCS) += lcs.o cu3088.o obj-$(CONFIG_CLAW) += claw.o cu3088.o -qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o -qeth-$(CONFIG_PROC_FS) += qeth_proc.o +qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o qeth_core_offl.o obj-$(CONFIG_QETH) += qeth.o +qeth_l2-y += qeth_l2_main.o +obj-$(CONFIG_QETH_L2) += qeth_l2.o +qeth_l3-y += qeth_l3_main.o qeth_l3_sys.o +obj-$(CONFIG_QETH_L3) += qeth_l3.o diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h new file mode 100644 index 0000000..9485e36 --- /dev/null +++ b/drivers/s390/net/qeth_core.h @@ -0,0 +1,916 @@ +/* + * drivers/s390/net/qeth_core.h + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#ifndef __QETH_CORE_H__ +#define __QETH_CORE_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "qeth_core_mpc.h" + +/** + * Debug Facility stuff + */ +#define QETH_DBF_SETUP_NAME "qeth_setup" +#define QETH_DBF_SETUP_LEN 8 +#define QETH_DBF_SETUP_PAGES 8 +#define QETH_DBF_SETUP_NR_AREAS 1 +#define QETH_DBF_SETUP_LEVEL 5 + +#define QETH_DBF_MISC_NAME "qeth_misc" +#define QETH_DBF_MISC_LEN 128 +#define QETH_DBF_MISC_PAGES 2 +#define QETH_DBF_MISC_NR_AREAS 1 +#define QETH_DBF_MISC_LEVEL 2 + +#define QETH_DBF_DATA_NAME "qeth_data" +#define QETH_DBF_DATA_LEN 96 +#define QETH_DBF_DATA_PAGES 8 +#define QETH_DBF_DATA_NR_AREAS 1 +#define QETH_DBF_DATA_LEVEL 2 + +#define QETH_DBF_CONTROL_NAME "qeth_control" +#define QETH_DBF_CONTROL_LEN 256 +#define QETH_DBF_CONTROL_PAGES 8 +#define QETH_DBF_CONTROL_NR_AREAS 1 +#define QETH_DBF_CONTROL_LEVEL 5 + +#define QETH_DBF_TRACE_NAME "qeth_trace" +#define QETH_DBF_TRACE_LEN 8 +#define QETH_DBF_TRACE_PAGES 4 +#define QETH_DBF_TRACE_NR_AREAS 1 +#define QETH_DBF_TRACE_LEVEL 3 + +#define QETH_DBF_SENSE_NAME "qeth_sense" +#define QETH_DBF_SENSE_LEN 64 +#define QETH_DBF_SENSE_PAGES 2 +#define QETH_DBF_SENSE_NR_AREAS 1 +#define QETH_DBF_SENSE_LEVEL 2 + +#define QETH_DBF_QERR_NAME "qeth_qerr" +#define QETH_DBF_QERR_LEN 8 +#define QETH_DBF_QERR_PAGES 2 +#define QETH_DBF_QERR_NR_AREAS 1 +#define QETH_DBF_QERR_LEVEL 2 + +#define QETH_DBF_TEXT(name, level, text) \ + do { \ + debug_text_event(qeth_dbf_##name, level, text); \ + } while (0) + +#define QETH_DBF_HEX(name, level, addr, len) \ + do { \ + debug_event(qeth_dbf_##name, level, (void *)(addr), len); \ + } while (0) + +/* Allow to sort out low debug levels early to avoid wasted sprints */ +static inline int qeth_dbf_passes(debug_info_t *dbf_grp, int level) +{ + return (level <= dbf_grp->level); +} + +/** + * some more debug stuff + */ +#define PRINTK_HEADER "qeth: " + +#define SENSE_COMMAND_REJECT_BYTE 0 +#define SENSE_COMMAND_REJECT_FLAG 0x80 +#define SENSE_RESETTING_EVENT_BYTE 1 +#define SENSE_RESETTING_EVENT_FLAG 0x80 + +/* + * Common IO related definitions + */ +#define CARD_RDEV(card) card->read.ccwdev +#define CARD_WDEV(card) card->write.ccwdev +#define CARD_DDEV(card) card->data.ccwdev +#define CARD_BUS_ID(card) card->gdev->dev.bus_id +#define CARD_RDEV_ID(card) card->read.ccwdev->dev.bus_id +#define CARD_WDEV_ID(card) card->write.ccwdev->dev.bus_id +#define CARD_DDEV_ID(card) card->data.ccwdev->dev.bus_id +#define CHANNEL_ID(channel) channel->ccwdev->dev.bus_id + +/** + * card stuff + */ +struct qeth_perf_stats { + unsigned int bufs_rec; + unsigned int bufs_sent; + + unsigned int skbs_sent_pack; + unsigned int bufs_sent_pack; + + unsigned int sc_dp_p; + unsigned int sc_p_dp; + /* qdio_input_handler: number of times called, time spent in */ + __u64 inbound_start_time; + unsigned int inbound_cnt; + unsigned int inbound_time; + /* qeth_send_packet: number of times called, time spent in */ + __u64 outbound_start_time; + unsigned int outbound_cnt; + unsigned int outbound_time; + /* qdio_output_handler: number of times called, time spent in */ + __u64 outbound_handler_start_time; + unsigned int outbound_handler_cnt; + unsigned int outbound_handler_time; + /* number of calls to and time spent in do_QDIO for inbound queue */ + __u64 inbound_do_qdio_start_time; + unsigned int inbound_do_qdio_cnt; + unsigned int inbound_do_qdio_time; + /* number of calls to and time spent in do_QDIO for outbound queues */ + __u64 outbound_do_qdio_start_time; + unsigned int outbound_do_qdio_cnt; + unsigned int outbound_do_qdio_time; + /* eddp data */ + unsigned int large_send_bytes; + unsigned int large_send_cnt; + unsigned int sg_skbs_sent; + unsigned int sg_frags_sent; + /* initial values when measuring starts */ + unsigned long initial_rx_packets; + unsigned long initial_tx_packets; + /* inbound scatter gather data */ + unsigned int sg_skbs_rx; + unsigned int sg_frags_rx; + unsigned int sg_alloc_page_rx; +}; + +/* Routing stuff */ +struct qeth_routing_info { + enum qeth_routing_types type; +}; + +/* IPA stuff */ +struct qeth_ipa_info { + __u32 supported_funcs; + __u32 enabled_funcs; +}; + +static inline int qeth_is_ipa_supported(struct qeth_ipa_info *ipa, + enum qeth_ipa_funcs func) +{ + return (ipa->supported_funcs & func); +} + +static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, + enum qeth_ipa_funcs func) +{ + return (ipa->supported_funcs & ipa->enabled_funcs & func); +} + +#define qeth_adp_supported(c, f) \ + qeth_is_ipa_supported(&c->options.adp, f) +#define qeth_adp_enabled(c, f) \ + qeth_is_ipa_enabled(&c->options.adp, f) +#define qeth_is_supported(c, f) \ + qeth_is_ipa_supported(&c->options.ipa4, f) +#define qeth_is_enabled(c, f) \ + qeth_is_ipa_enabled(&c->options.ipa4, f) +#define qeth_is_supported6(c, f) \ + qeth_is_ipa_supported(&c->options.ipa6, f) +#define qeth_is_enabled6(c, f) \ + qeth_is_ipa_enabled(&c->options.ipa6, f) +#define qeth_is_ipafunc_supported(c, prot, f) \ + ((prot == QETH_PROT_IPV6) ? \ + qeth_is_supported6(c, f) : qeth_is_supported(c, f)) +#define qeth_is_ipafunc_enabled(c, prot, f) \ + ((prot == QETH_PROT_IPV6) ? \ + qeth_is_enabled6(c, f) : qeth_is_enabled(c, f)) + +#define QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT 0x0101 +#define QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT 0x0101 +#define QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT 0x4108 +#define QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT 0x5108 + +#define QETH_MODELLIST_ARRAY \ + {{0x1731, 0x01, 0x1732, 0x01, QETH_CARD_TYPE_OSAE, 1, \ + QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ + QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ + QETH_MAX_QUEUES, 0}, \ + {0x1731, 0x05, 0x1732, 0x05, QETH_CARD_TYPE_IQD, 0, \ + QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT, \ + QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT, \ + QETH_MAX_QUEUES, 0x103}, \ + {0x1731, 0x06, 0x1732, 0x06, QETH_CARD_TYPE_OSN, 0, \ + QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ + QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ + QETH_MAX_QUEUES, 0}, \ + {0, 0, 0, 0, 0, 0, 0, 0, 0} } + +#define QETH_REAL_CARD 1 +#define QETH_VLAN_CARD 2 +#define QETH_BUFSIZE 4096 + +/** + * some more defs + */ +#define QETH_TX_TIMEOUT 100 * HZ +#define QETH_RCD_TIMEOUT 60 * HZ +#define QETH_HEADER_SIZE 32 +#define QETH_MAX_PORTNO 15 + +/*IPv6 address autoconfiguration stuff*/ +#define UNIQUE_ID_IF_CREATE_ADDR_FAILED 0xfffe +#define UNIQUE_ID_NOT_BY_CARD 0x10000 + +/*****************************************************************************/ +/* QDIO queue and buffer handling */ +/*****************************************************************************/ +#define QETH_MAX_QUEUES 4 +#define QETH_IN_BUF_SIZE_DEFAULT 65536 +#define QETH_IN_BUF_COUNT_DEFAULT 16 +#define QETH_IN_BUF_COUNT_MIN 8 +#define QETH_IN_BUF_COUNT_MAX 128 +#define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12) +#define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \ + ((card)->qdio.in_buf_pool.buf_count / 2) + +/* buffers we have to be behind before we get a PCI */ +#define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1) +/*enqueued free buffers left before we get a PCI*/ +#define QETH_PCI_THRESHOLD_B(card) 0 +/*not used unless the microcode gets patched*/ +#define QETH_PCI_TIMER_VALUE(card) 3 + +#define QETH_MIN_INPUT_THRESHOLD 1 +#define QETH_MAX_INPUT_THRESHOLD 500 +#define QETH_MIN_OUTPUT_THRESHOLD 1 +#define QETH_MAX_OUTPUT_THRESHOLD 300 + +/* priority queing */ +#define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING +#define QETH_DEFAULT_QUEUE 2 +#define QETH_NO_PRIO_QUEUEING 0 +#define QETH_PRIO_Q_ING_PREC 1 +#define QETH_PRIO_Q_ING_TOS 2 +#define IP_TOS_LOWDELAY 0x10 +#define IP_TOS_HIGHTHROUGHPUT 0x08 +#define IP_TOS_HIGHRELIABILITY 0x04 +#define IP_TOS_NOTIMPORTANT 0x02 + +/* Packing */ +#define QETH_LOW_WATERMARK_PACK 2 +#define QETH_HIGH_WATERMARK_PACK 5 +#define QETH_WATERMARK_PACK_FUZZ 1 + +#define QETH_IP_HEADER_SIZE 40 + +/* large receive scatter gather copy break */ +#define QETH_RX_SG_CB (PAGE_SIZE >> 1) + +struct qeth_hdr_layer3 { + __u8 id; + __u8 flags; + __u16 inbound_checksum; /*TSO:__u16 seqno */ + __u32 token; /*TSO: __u32 reserved */ + __u16 length; + __u8 vlan_prio; + __u8 ext_flags; + __u16 vlan_id; + __u16 frame_offset; + __u8 dest_addr[16]; +} __attribute__ ((packed)); + +struct qeth_hdr_layer2 { + __u8 id; + __u8 flags[3]; + __u8 port_no; + __u8 hdr_length; + __u16 pkt_length; + __u16 seq_no; + __u16 vlan_id; + __u32 reserved; + __u8 reserved2[16]; +} __attribute__ ((packed)); + +struct qeth_hdr_osn { + __u8 id; + __u8 reserved; + __u16 seq_no; + __u16 reserved2; + __u16 control_flags; + __u16 pdu_length; + __u8 reserved3[18]; + __u32 ccid; +} __attribute__ ((packed)); + +struct qeth_hdr { + union { + struct qeth_hdr_layer2 l2; + struct qeth_hdr_layer3 l3; + struct qeth_hdr_osn osn; + } hdr; +} __attribute__ ((packed)); + +/*TCP Segmentation Offload header*/ +struct qeth_hdr_ext_tso { + __u16 hdr_tot_len; + __u8 imb_hdr_no; + __u8 reserved; + __u8 hdr_type; + __u8 hdr_version; + __u16 hdr_len; + __u32 payload_len; + __u16 mss; + __u16 dg_hdr_len; + __u8 padding[16]; +} __attribute__ ((packed)); + +struct qeth_hdr_tso { + struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/ + struct qeth_hdr_ext_tso ext; +} __attribute__ ((packed)); + + +/* flags for qeth_hdr.flags */ +#define QETH_HDR_PASSTHRU 0x10 +#define QETH_HDR_IPV6 0x80 +#define QETH_HDR_CAST_MASK 0x07 +enum qeth_cast_flags { + QETH_CAST_UNICAST = 0x06, + QETH_CAST_MULTICAST = 0x04, + QETH_CAST_BROADCAST = 0x05, + QETH_CAST_ANYCAST = 0x07, + QETH_CAST_NOCAST = 0x00, +}; + +enum qeth_layer2_frame_flags { + QETH_LAYER2_FLAG_MULTICAST = 0x01, + QETH_LAYER2_FLAG_BROADCAST = 0x02, + QETH_LAYER2_FLAG_UNICAST = 0x04, + QETH_LAYER2_FLAG_VLAN = 0x10, +}; + +enum qeth_header_ids { + QETH_HEADER_TYPE_LAYER3 = 0x01, + QETH_HEADER_TYPE_LAYER2 = 0x02, + QETH_HEADER_TYPE_TSO = 0x03, + QETH_HEADER_TYPE_OSN = 0x04, +}; +/* flags for qeth_hdr.ext_flags */ +#define QETH_HDR_EXT_VLAN_FRAME 0x01 +#define QETH_HDR_EXT_TOKEN_ID 0x02 +#define QETH_HDR_EXT_INCLUDE_VLAN_TAG 0x04 +#define QETH_HDR_EXT_SRC_MAC_ADDR 0x08 +#define QETH_HDR_EXT_CSUM_HDR_REQ 0x10 +#define QETH_HDR_EXT_CSUM_TRANSP_REQ 0x20 +#define QETH_HDR_EXT_UDP_TSO 0x40 /*bit off for TCP*/ + +static inline int qeth_is_last_sbale(struct qdio_buffer_element *sbale) +{ + return (sbale->flags & SBAL_FLAGS_LAST_ENTRY); +} + +enum qeth_qdio_buffer_states { + /* + * inbound: read out by driver; owned by hardware in order to be filled + * outbound: owned by driver in order to be filled + */ + QETH_QDIO_BUF_EMPTY, + /* + * inbound: filled by hardware; owned by driver in order to be read out + * outbound: filled by driver; owned by hardware in order to be sent + */ + QETH_QDIO_BUF_PRIMED, +}; + +enum qeth_qdio_info_states { + QETH_QDIO_UNINITIALIZED, + QETH_QDIO_ALLOCATED, + QETH_QDIO_ESTABLISHED, + QETH_QDIO_CLEANING +}; + +struct qeth_buffer_pool_entry { + struct list_head list; + struct list_head init_list; + void *elements[QDIO_MAX_ELEMENTS_PER_BUFFER]; +}; + +struct qeth_qdio_buffer_pool { + struct list_head entry_list; + int buf_count; +}; + +struct qeth_qdio_buffer { + struct qdio_buffer *buffer; + /* the buffer pool entry currently associated to this buffer */ + struct qeth_buffer_pool_entry *pool_entry; +}; + +struct qeth_qdio_q { + struct qdio_buffer qdio_bufs[QDIO_MAX_BUFFERS_PER_Q]; + struct qeth_qdio_buffer bufs[QDIO_MAX_BUFFERS_PER_Q]; + int next_buf_to_init; +} __attribute__ ((aligned(256))); + +/* possible types of qeth large_send support */ +enum qeth_large_send_types { + QETH_LARGE_SEND_NO, + QETH_LARGE_SEND_EDDP, + QETH_LARGE_SEND_TSO, +}; + +struct qeth_qdio_out_buffer { + struct qdio_buffer *buffer; + atomic_t state; + int next_element_to_fill; + struct sk_buff_head skb_list; + struct list_head ctx_list; +}; + +struct qeth_card; + +enum qeth_out_q_states { + QETH_OUT_Q_UNLOCKED, + QETH_OUT_Q_LOCKED, + QETH_OUT_Q_LOCKED_FLUSH, +}; + +struct qeth_qdio_out_q { + struct qdio_buffer qdio_bufs[QDIO_MAX_BUFFERS_PER_Q]; + struct qeth_qdio_out_buffer bufs[QDIO_MAX_BUFFERS_PER_Q]; + int queue_no; + struct qeth_card *card; + atomic_t state; + int do_pack; + /* + * index of buffer to be filled by driver; state EMPTY or PACKING + */ + int next_buf_to_fill; + /* + * number of buffers that are currently filled (PRIMED) + * -> these buffers are hardware-owned + */ + atomic_t used_buffers; + /* indicates whether PCI flag must be set (or if one is outstanding) */ + atomic_t set_pci_flags_count; +} __attribute__ ((aligned(256))); + +struct qeth_qdio_info { + atomic_t state; + /* input */ + struct qeth_qdio_q *in_q; + struct qeth_qdio_buffer_pool in_buf_pool; + struct qeth_qdio_buffer_pool init_pool; + int in_buf_size; + + /* output */ + int no_out_queues; + struct qeth_qdio_out_q **out_qs; + + /* priority queueing */ + int do_prio_queueing; + int default_out_queue; +}; + +enum qeth_send_errors { + QETH_SEND_ERROR_NONE, + QETH_SEND_ERROR_LINK_FAILURE, + QETH_SEND_ERROR_RETRY, + QETH_SEND_ERROR_KICK_IT, +}; + +#define QETH_ETH_MAC_V4 0x0100 /* like v4 */ +#define QETH_ETH_MAC_V6 0x3333 /* like v6 */ +/* tr mc mac is longer, but that will be enough to detect mc frames */ +#define QETH_TR_MAC_NC 0xc000 /* non-canonical */ +#define QETH_TR_MAC_C 0x0300 /* canonical */ + +#define DEFAULT_ADD_HHLEN 0 +#define MAX_ADD_HHLEN 1024 + +/** + * buffer stuff for read channel + */ +#define QETH_CMD_BUFFER_NO 8 + +/** + * channel state machine + */ +enum qeth_channel_states { + CH_STATE_UP, + CH_STATE_DOWN, + CH_STATE_ACTIVATING, + CH_STATE_HALTED, + CH_STATE_STOPPED, + CH_STATE_RCD, + CH_STATE_RCD_DONE, +}; +/** + * card state machine + */ +enum qeth_card_states { + CARD_STATE_DOWN, + CARD_STATE_HARDSETUP, + CARD_STATE_SOFTSETUP, + CARD_STATE_UP, + CARD_STATE_RECOVER, +}; + +/** + * Protocol versions + */ +enum qeth_prot_versions { + QETH_PROT_IPV4 = 0x0004, + QETH_PROT_IPV6 = 0x0006, +}; + +enum qeth_ip_types { + QETH_IP_TYPE_NORMAL, + QETH_IP_TYPE_VIPA, + QETH_IP_TYPE_RXIP, + QETH_IP_TYPE_DEL_ALL_MC, +}; + +enum qeth_cmd_buffer_state { + BUF_STATE_FREE, + BUF_STATE_LOCKED, + BUF_STATE_PROCESSED, +}; + +struct qeth_ipato { + int enabled; + int invert4; + int invert6; + struct list_head entries; +}; + +struct qeth_channel; + +struct qeth_cmd_buffer { + enum qeth_cmd_buffer_state state; + struct qeth_channel *channel; + unsigned char *data; + int rc; + void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *); +}; + +/** + * definition of a qeth channel, used for read and write + */ +struct qeth_channel { + enum qeth_channel_states state; + struct ccw1 ccw; + spinlock_t iob_lock; + wait_queue_head_t wait_q; + struct tasklet_struct irq_tasklet; + struct ccw_device *ccwdev; +/*command buffer for control data*/ + struct qeth_cmd_buffer iob[QETH_CMD_BUFFER_NO]; + atomic_t irq_pending; + int io_buf_no; + int buf_no; +}; + +/** + * OSA card related definitions + */ +struct qeth_token { + __u32 issuer_rm_w; + __u32 issuer_rm_r; + __u32 cm_filter_w; + __u32 cm_filter_r; + __u32 cm_connection_w; + __u32 cm_connection_r; + __u32 ulp_filter_w; + __u32 ulp_filter_r; + __u32 ulp_connection_w; + __u32 ulp_connection_r; +}; + +struct qeth_seqno { + __u32 trans_hdr; + __u32 pdu_hdr; + __u32 pdu_hdr_ack; + __u16 ipa; + __u32 pkt_seqno; +}; + +struct qeth_reply { + struct list_head list; + wait_queue_head_t wait_q; + int (*callback)(struct qeth_card *, struct qeth_reply *, + unsigned long); + u32 seqno; + unsigned long offset; + atomic_t received; + int rc; + void *param; + struct qeth_card *card; + atomic_t refcnt; +}; + + +struct qeth_card_blkt { + int time_total; + int inter_packet; + int inter_packet_jumbo; +}; + +#define QETH_BROADCAST_WITH_ECHO 0x01 +#define QETH_BROADCAST_WITHOUT_ECHO 0x02 +#define QETH_LAYER2_MAC_READ 0x01 +#define QETH_LAYER2_MAC_REGISTERED 0x02 +struct qeth_card_info { + unsigned short unit_addr2; + unsigned short cula; + unsigned short chpid; + __u16 func_level; + char mcl_level[QETH_MCL_LENGTH + 1]; + int guestlan; + int mac_bits; + int portname_required; + int portno; + char portname[9]; + enum qeth_card_types type; + enum qeth_link_types link_type; + int is_multicast_different; + int initial_mtu; + int max_mtu; + int broadcast_capable; + int unique_id; + struct qeth_card_blkt blkt; + __u32 csum_mask; + enum qeth_ipa_promisc_modes promisc_mode; +}; + +struct qeth_card_options { + struct qeth_routing_info route4; + struct qeth_ipa_info ipa4; + struct qeth_ipa_info adp; /*Adapter parameters*/ + struct qeth_routing_info route6; + struct qeth_ipa_info ipa6; + enum qeth_checksum_types checksum_type; + int broadcast_mode; + int macaddr_mode; + int fake_broadcast; + int add_hhlen; + int fake_ll; + int layer2; + enum qeth_large_send_types large_send; + int performance_stats; + int rx_sg_cb; +}; + +/* + * thread bits for qeth_card thread masks + */ +enum qeth_threads { + QETH_RECOVER_THREAD = 1, +}; + +struct qeth_osn_info { + int (*assist_cb)(struct net_device *dev, void *data); + int (*data_cb)(struct sk_buff *skb); +}; + +enum qeth_discipline_id { + QETH_DISCIPLINE_LAYER3 = 0, + QETH_DISCIPLINE_LAYER2 = 1, +}; + +struct qeth_discipline { + qdio_handler_t *input_handler; + qdio_handler_t *output_handler; + int (*recover)(void *ptr); + struct ccwgroup_driver *ccwgdriver; +}; + +struct qeth_vlan_vid { + struct list_head list; + unsigned short vid; +}; + +struct qeth_mc_mac { + struct list_head list; + __u8 mc_addr[MAX_ADDR_LEN]; + unsigned char mc_addrlen; +}; + +struct qeth_card { + struct list_head list; + enum qeth_card_states state; + int lan_online; + spinlock_t lock; + struct ccwgroup_device *gdev; + struct qeth_channel read; + struct qeth_channel write; + struct qeth_channel data; + + struct net_device *dev; + struct net_device_stats stats; + + struct qeth_card_info info; + struct qeth_token token; + struct qeth_seqno seqno; + struct qeth_card_options options; + + wait_queue_head_t wait_q; + spinlock_t vlanlock; + spinlock_t mclock; + struct vlan_group *vlangrp; + struct list_head vid_list; + struct list_head mc_list; + struct work_struct kernel_thread_starter; + spinlock_t thread_mask_lock; + unsigned long thread_start_mask; + unsigned long thread_allowed_mask; + unsigned long thread_running_mask; + spinlock_t ip_lock; + struct list_head ip_list; + struct list_head *ip_tbd_list; + struct qeth_ipato ipato; + struct list_head cmd_waiter_list; + /* QDIO buffer handling */ + struct qeth_qdio_info qdio; + struct qeth_perf_stats perf_stats; + int use_hard_stop; + struct qeth_osn_info osn_info; + struct qeth_discipline discipline; + atomic_t force_alloc_skb; +}; + +struct qeth_card_list_struct { + struct list_head list; + rwlock_t rwlock; +}; + +/*some helper functions*/ +#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") + +static inline struct qeth_card *CARD_FROM_CDEV(struct ccw_device *cdev) +{ + struct qeth_card *card = dev_get_drvdata(&((struct ccwgroup_device *) + dev_get_drvdata(&cdev->dev))->dev); + return card; +} + +static inline int qeth_get_micros(void) +{ + return (int) (get_clock() >> 12); +} + +static inline void *qeth_push_skb(struct qeth_card *card, struct sk_buff *skb, + int size) +{ + void *hdr; + + hdr = (void *) skb_push(skb, size); + /* + * sanity check, the Linux memory allocation scheme should + * never present us cases like this one (the qdio header size plus + * the first 40 bytes of the paket cross a 4k boundary) + */ + if ((((unsigned long) hdr) & (~(PAGE_SIZE - 1))) != + (((unsigned long) hdr + size + + QETH_IP_HEADER_SIZE) & (~(PAGE_SIZE - 1)))) { + PRINT_ERR("Misaligned packet on interface %s. Discarded.", + QETH_CARD_IFNAME(card)); + return NULL; + } + return hdr; +} + +static inline int qeth_get_ip_version(struct sk_buff *skb) +{ + switch (skb->protocol) { + case ETH_P_IPV6: + return 6; + case ETH_P_IP: + return 4; + default: + return 0; + } +} + +struct qeth_eddp_context; +extern struct ccwgroup_driver qeth_l2_ccwgroup_driver; +extern struct ccwgroup_driver qeth_l3_ccwgroup_driver; +const char *qeth_get_cardname_short(struct qeth_card *); +int qeth_realloc_buffer_pool(struct qeth_card *, int); +int qeth_core_load_discipline(struct qeth_card *, enum qeth_discipline_id); +void qeth_core_free_discipline(struct qeth_card *); +int qeth_core_create_device_attributes(struct device *); +void qeth_core_remove_device_attributes(struct device *); +int qeth_core_create_osn_attributes(struct device *); +void qeth_core_remove_osn_attributes(struct device *); + +/* exports for qeth discipline device drivers */ +extern struct qeth_card_list_struct qeth_core_card_list; +extern debug_info_t *qeth_dbf_setup; +extern debug_info_t *qeth_dbf_data; +extern debug_info_t *qeth_dbf_misc; +extern debug_info_t *qeth_dbf_control; +extern debug_info_t *qeth_dbf_trace; +extern debug_info_t *qeth_dbf_sense; +extern debug_info_t *qeth_dbf_qerr; + +void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int); +int qeth_threads_running(struct qeth_card *, unsigned long); +int qeth_wait_for_threads(struct qeth_card *, unsigned long); +int qeth_do_run_thread(struct qeth_card *, unsigned long); +void qeth_clear_thread_start_bit(struct qeth_card *, unsigned long); +void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long); +int qeth_core_hardsetup_card(struct qeth_card *); +void qeth_print_status_message(struct qeth_card *); +int qeth_init_qdio_queues(struct qeth_card *); +int qeth_send_startlan(struct qeth_card *); +int qeth_send_stoplan(struct qeth_card *); +int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, + int (*reply_cb) + (struct qeth_card *, struct qeth_reply *, unsigned long), + void *); +struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *, + enum qeth_ipa_cmds, enum qeth_prot_versions); +int qeth_query_setadapterparms(struct qeth_card *); +int qeth_check_qdio_errors(struct qdio_buffer *, unsigned int, + unsigned int, const char *); +void qeth_put_buffer_pool_entry(struct qeth_card *, + struct qeth_buffer_pool_entry *); +void qeth_queue_input_buffer(struct qeth_card *, int); +struct sk_buff *qeth_core_get_next_skb(struct qeth_card *, + struct qdio_buffer *, struct qdio_buffer_element **, int *, + struct qeth_hdr **); +void qeth_schedule_recovery(struct qeth_card *); +void qeth_qdio_output_handler(struct ccw_device *, unsigned int, + unsigned int, unsigned int, + unsigned int, int, int, + unsigned long); +void qeth_clear_ipacmd_list(struct qeth_card *); +int qeth_qdio_clear_card(struct qeth_card *, int); +void qeth_clear_working_pool_list(struct qeth_card *); +void qeth_clear_cmd_buffers(struct qeth_channel *); +void qeth_clear_qdio_buffers(struct qeth_card *); +void qeth_setadp_promisc_mode(struct qeth_card *); +struct net_device_stats *qeth_get_stats(struct net_device *); +int qeth_change_mtu(struct net_device *, int); +int qeth_setadpparms_change_macaddr(struct qeth_card *); +void qeth_tx_timeout(struct net_device *); +void qeth_prepare_control_data(struct qeth_card *, int, + struct qeth_cmd_buffer *); +void qeth_release_buffer(struct qeth_channel *, struct qeth_cmd_buffer *); +void qeth_prepare_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, char); +struct qeth_cmd_buffer *qeth_wait_for_buffer(struct qeth_channel *); +int qeth_mdio_read(struct net_device *, int, int); +int qeth_snmp_command(struct qeth_card *, char __user *); +int qeth_set_large_send(struct qeth_card *, enum qeth_large_send_types); +struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *, __u32, __u32); +int qeth_default_setadapterparms_cb(struct qeth_card *, struct qeth_reply *, + unsigned long); +int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *, + int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long), + void *reply_param); +int qeth_get_cast_type(struct qeth_card *, struct sk_buff *); +int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int); +struct sk_buff *qeth_prepare_skb(struct qeth_card *, struct sk_buff *, + struct qeth_hdr **); +int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int); +int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *, + struct sk_buff *, struct qeth_hdr *, int, + struct qeth_eddp_context *); +int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *, + struct sk_buff *, struct qeth_hdr *, + int, struct qeth_eddp_context *); +int qeth_core_get_stats_count(struct net_device *); +void qeth_core_get_ethtool_stats(struct net_device *, + struct ethtool_stats *, u64 *); +void qeth_core_get_strings(struct net_device *, u32, u8 *); +void qeth_core_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); + +/* exports for OSN */ +int qeth_osn_assist(struct net_device *, void *, int); +int qeth_osn_register(unsigned char *read_dev_no, struct net_device **, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)); +void qeth_osn_deregister(struct net_device *); + +#endif /* __QETH_CORE_H__ */ diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c new file mode 100644 index 0000000..95c6fcf --- /dev/null +++ b/drivers/s390/net/qeth_core_main.c @@ -0,0 +1,4540 @@ +/* + * drivers/s390/net/qeth_core_main.c + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "qeth_core.h" +#include "qeth_core_offl.h" + +#define QETH_DBF_TEXT_(name, level, text...) \ + do { \ + if (qeth_dbf_passes(qeth_dbf_##name, level)) { \ + char *dbf_txt_buf = \ + get_cpu_var(qeth_core_dbf_txt_buf); \ + sprintf(dbf_txt_buf, text); \ + debug_text_event(qeth_dbf_##name, level, dbf_txt_buf); \ + put_cpu_var(qeth_core_dbf_txt_buf); \ + } \ + } while (0) + +struct qeth_card_list_struct qeth_core_card_list; +EXPORT_SYMBOL_GPL(qeth_core_card_list); +debug_info_t *qeth_dbf_setup; +EXPORT_SYMBOL_GPL(qeth_dbf_setup); +debug_info_t *qeth_dbf_data; +EXPORT_SYMBOL_GPL(qeth_dbf_data); +debug_info_t *qeth_dbf_misc; +EXPORT_SYMBOL_GPL(qeth_dbf_misc); +debug_info_t *qeth_dbf_control; +EXPORT_SYMBOL_GPL(qeth_dbf_control); +debug_info_t *qeth_dbf_trace; +EXPORT_SYMBOL_GPL(qeth_dbf_trace); +debug_info_t *qeth_dbf_sense; +EXPORT_SYMBOL_GPL(qeth_dbf_sense); +debug_info_t *qeth_dbf_qerr; +EXPORT_SYMBOL_GPL(qeth_dbf_qerr); + +static struct device *qeth_core_root_dev; +static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY; +static struct lock_class_key qdio_out_skb_queue_key; +static DEFINE_PER_CPU(char[256], qeth_core_dbf_txt_buf); + +static void qeth_send_control_data_cb(struct qeth_channel *, + struct qeth_cmd_buffer *); +static int qeth_issue_next_read(struct qeth_card *); +static struct qeth_cmd_buffer *qeth_get_buffer(struct qeth_channel *); +static void qeth_setup_ccw(struct qeth_channel *, unsigned char *, __u32); +static void qeth_free_buffer_pool(struct qeth_card *); +static int qeth_qdio_establish(struct qeth_card *); + + +static inline void __qeth_fill_buffer_frag(struct sk_buff *skb, + struct qdio_buffer *buffer, int is_tso, + int *next_element_to_fill) +{ + struct skb_frag_struct *frag; + int fragno; + unsigned long addr; + int element, cnt, dlen; + + fragno = skb_shinfo(skb)->nr_frags; + element = *next_element_to_fill; + dlen = 0; + + if (is_tso) + buffer->element[element].flags = + SBAL_FLAGS_MIDDLE_FRAG; + else + buffer->element[element].flags = + SBAL_FLAGS_FIRST_FRAG; + dlen = skb->len - skb->data_len; + if (dlen) { + buffer->element[element].addr = skb->data; + buffer->element[element].length = dlen; + element++; + } + for (cnt = 0; cnt < fragno; cnt++) { + frag = &skb_shinfo(skb)->frags[cnt]; + addr = (page_to_pfn(frag->page) << PAGE_SHIFT) + + frag->page_offset; + buffer->element[element].addr = (char *)addr; + buffer->element[element].length = frag->size; + if (cnt < (fragno - 1)) + buffer->element[element].flags = + SBAL_FLAGS_MIDDLE_FRAG; + else + buffer->element[element].flags = + SBAL_FLAGS_LAST_FRAG; + element++; + } + *next_element_to_fill = element; +} + +static inline const char *qeth_get_cardname(struct qeth_card *card) +{ + if (card->info.guestlan) { + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + return " Guest LAN QDIO"; + case QETH_CARD_TYPE_IQD: + return " Guest LAN Hiper"; + default: + return " unknown"; + } + } else { + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + return " OSD Express"; + case QETH_CARD_TYPE_IQD: + return " HiperSockets"; + case QETH_CARD_TYPE_OSN: + return " OSN QDIO"; + default: + return " unknown"; + } + } + return " n/a"; +} + +/* max length to be returned: 14 */ +const char *qeth_get_cardname_short(struct qeth_card *card) +{ + if (card->info.guestlan) { + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + return "GuestLAN QDIO"; + case QETH_CARD_TYPE_IQD: + return "GuestLAN Hiper"; + default: + return "unknown"; + } + } else { + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + switch (card->info.link_type) { + case QETH_LINK_TYPE_FAST_ETH: + return "OSD_100"; + case QETH_LINK_TYPE_HSTR: + return "HSTR"; + case QETH_LINK_TYPE_GBIT_ETH: + return "OSD_1000"; + case QETH_LINK_TYPE_10GBIT_ETH: + return "OSD_10GIG"; + case QETH_LINK_TYPE_LANE_ETH100: + return "OSD_FE_LANE"; + case QETH_LINK_TYPE_LANE_TR: + return "OSD_TR_LANE"; + case QETH_LINK_TYPE_LANE_ETH1000: + return "OSD_GbE_LANE"; + case QETH_LINK_TYPE_LANE: + return "OSD_ATM_LANE"; + default: + return "OSD_Express"; + } + case QETH_CARD_TYPE_IQD: + return "HiperSockets"; + case QETH_CARD_TYPE_OSN: + return "OSN"; + default: + return "unknown"; + } + } + return "n/a"; +} + +void qeth_set_allowed_threads(struct qeth_card *card, unsigned long threads, + int clear_start_mask) +{ + unsigned long flags; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + card->thread_allowed_mask = threads; + if (clear_start_mask) + card->thread_start_mask &= threads; + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + wake_up(&card->wait_q); +} +EXPORT_SYMBOL_GPL(qeth_set_allowed_threads); + +int qeth_threads_running(struct qeth_card *card, unsigned long threads) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + rc = (card->thread_running_mask & threads); + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_threads_running); + +int qeth_wait_for_threads(struct qeth_card *card, unsigned long threads) +{ + return wait_event_interruptible(card->wait_q, + qeth_threads_running(card, threads) == 0); +} +EXPORT_SYMBOL_GPL(qeth_wait_for_threads); + +void qeth_clear_working_pool_list(struct qeth_card *card) +{ + struct qeth_buffer_pool_entry *pool_entry, *tmp; + + QETH_DBF_TEXT(trace, 5, "clwrklst"); + list_for_each_entry_safe(pool_entry, tmp, + &card->qdio.in_buf_pool.entry_list, list){ + list_del(&pool_entry->list); + } +} +EXPORT_SYMBOL_GPL(qeth_clear_working_pool_list); + +static int qeth_alloc_buffer_pool(struct qeth_card *card) +{ + struct qeth_buffer_pool_entry *pool_entry; + void *ptr; + int i, j; + + QETH_DBF_TEXT(trace, 5, "alocpool"); + for (i = 0; i < card->qdio.init_pool.buf_count; ++i) { + pool_entry = kmalloc(sizeof(*pool_entry), GFP_KERNEL); + if (!pool_entry) { + qeth_free_buffer_pool(card); + return -ENOMEM; + } + for (j = 0; j < QETH_MAX_BUFFER_ELEMENTS(card); ++j) { + ptr = (void *) __get_free_page(GFP_KERNEL|GFP_DMA); + if (!ptr) { + while (j > 0) + free_page((unsigned long) + pool_entry->elements[--j]); + kfree(pool_entry); + qeth_free_buffer_pool(card); + return -ENOMEM; + } + pool_entry->elements[j] = ptr; + } + list_add(&pool_entry->init_list, + &card->qdio.init_pool.entry_list); + } + return 0; +} + +int qeth_realloc_buffer_pool(struct qeth_card *card, int bufcnt) +{ + QETH_DBF_TEXT(trace, 2, "realcbp"); + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + /* TODO: steel/add buffers from/to a running card's buffer pool (?) */ + qeth_clear_working_pool_list(card); + qeth_free_buffer_pool(card); + card->qdio.in_buf_pool.buf_count = bufcnt; + card->qdio.init_pool.buf_count = bufcnt; + return qeth_alloc_buffer_pool(card); +} + +int qeth_set_large_send(struct qeth_card *card, + enum qeth_large_send_types type) +{ + int rc = 0; + + if (card->dev == NULL) { + card->options.large_send = type; + return 0; + } + if (card->state == CARD_STATE_UP) + netif_tx_disable(card->dev); + card->options.large_send = type; + switch (card->options.large_send) { + case QETH_LARGE_SEND_EDDP: + card->dev->features |= NETIF_F_TSO | NETIF_F_SG | + NETIF_F_HW_CSUM; + break; + case QETH_LARGE_SEND_TSO: + if (qeth_is_supported(card, IPA_OUTBOUND_TSO)) { + card->dev->features |= NETIF_F_TSO | NETIF_F_SG | + NETIF_F_HW_CSUM; + } else { + PRINT_WARN("TSO not supported on %s. " + "large_send set to 'no'.\n", + card->dev->name); + card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | + NETIF_F_HW_CSUM); + card->options.large_send = QETH_LARGE_SEND_NO; + rc = -EOPNOTSUPP; + } + break; + default: /* includes QETH_LARGE_SEND_NO */ + card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | + NETIF_F_HW_CSUM); + break; + } + if (card->state == CARD_STATE_UP) + netif_wake_queue(card->dev); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_set_large_send); + +static int qeth_issue_next_read(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 5, "issnxrd"); + if (card->read.state != CH_STATE_UP) + return -EIO; + iob = qeth_get_buffer(&card->read); + if (!iob) { + PRINT_WARN("issue_next_read failed: no iob available!\n"); + return -ENOMEM; + } + qeth_setup_ccw(&card->read, iob->data, QETH_BUFSIZE); + QETH_DBF_TEXT(trace, 6, "noirqpnd"); + rc = ccw_device_start(card->read.ccwdev, &card->read.ccw, + (addr_t) iob, 0, 0); + if (rc) { + PRINT_ERR("Error in starting next read ccw! rc=%i\n", rc); + atomic_set(&card->read.irq_pending, 0); + qeth_schedule_recovery(card); + wake_up(&card->wait_q); + } + return rc; +} + +static struct qeth_reply *qeth_alloc_reply(struct qeth_card *card) +{ + struct qeth_reply *reply; + + reply = kzalloc(sizeof(struct qeth_reply), GFP_ATOMIC); + if (reply) { + atomic_set(&reply->refcnt, 1); + atomic_set(&reply->received, 0); + reply->card = card; + }; + return reply; +} + +static void qeth_get_reply(struct qeth_reply *reply) +{ + WARN_ON(atomic_read(&reply->refcnt) <= 0); + atomic_inc(&reply->refcnt); +} + +static void qeth_put_reply(struct qeth_reply *reply) +{ + WARN_ON(atomic_read(&reply->refcnt) <= 0); + if (atomic_dec_and_test(&reply->refcnt)) + kfree(reply); +} + +static void qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, + struct qeth_card *card) +{ + int rc; + int com; + char *ipa_name; + + com = cmd->hdr.command; + rc = cmd->hdr.return_code; + ipa_name = qeth_get_ipa_cmd_name(com); + + PRINT_ERR("%s(x%X) for %s returned x%X \"%s\"\n", ipa_name, com, + QETH_CARD_IFNAME(card), rc, qeth_get_ipa_msg(rc)); +} + +static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, + struct qeth_cmd_buffer *iob) +{ + struct qeth_ipa_cmd *cmd = NULL; + + QETH_DBF_TEXT(trace, 5, "chkipad"); + if (IS_IPA(iob->data)) { + cmd = (struct qeth_ipa_cmd *) PDU_ENCAPSULATION(iob->data); + if (IS_IPA_REPLY(cmd)) { + if (cmd->hdr.return_code && + (cmd->hdr.command < IPA_CMD_SETCCID || + cmd->hdr.command > IPA_CMD_MODCCID)) + qeth_issue_ipa_msg(cmd, card); + return cmd; + } else { + switch (cmd->hdr.command) { + case IPA_CMD_STOPLAN: + PRINT_WARN("Link failure on %s (CHPID 0x%X) - " + "there is a network problem or " + "someone pulled the cable or " + "disabled the port.\n", + QETH_CARD_IFNAME(card), + card->info.chpid); + card->lan_online = 0; + if (card->dev && netif_carrier_ok(card->dev)) + netif_carrier_off(card->dev); + return NULL; + case IPA_CMD_STARTLAN: + PRINT_INFO("Link reestablished on %s " + "(CHPID 0x%X). Scheduling " + "IP address reset.\n", + QETH_CARD_IFNAME(card), + card->info.chpid); + netif_carrier_on(card->dev); + qeth_schedule_recovery(card); + return NULL; + case IPA_CMD_MODCCID: + return cmd; + case IPA_CMD_REGISTER_LOCAL_ADDR: + QETH_DBF_TEXT(trace, 3, "irla"); + break; + case IPA_CMD_UNREGISTER_LOCAL_ADDR: + QETH_DBF_TEXT(trace, 3, "urla"); + break; + default: + PRINT_WARN("Received data is IPA " + "but not a reply!\n"); + break; + } + } + } + return cmd; +} + +void qeth_clear_ipacmd_list(struct qeth_card *card) +{ + struct qeth_reply *reply, *r; + unsigned long flags; + + QETH_DBF_TEXT(trace, 4, "clipalst"); + + spin_lock_irqsave(&card->lock, flags); + list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { + qeth_get_reply(reply); + reply->rc = -EIO; + atomic_inc(&reply->received); + list_del_init(&reply->list); + wake_up(&reply->wait_q); + qeth_put_reply(reply); + } + spin_unlock_irqrestore(&card->lock, flags); +} +EXPORT_SYMBOL_GPL(qeth_clear_ipacmd_list); + +static int qeth_check_idx_response(unsigned char *buffer) +{ + if (!buffer) + return 0; + + QETH_DBF_HEX(control, 2, buffer, QETH_DBF_CONTROL_LEN); + if ((buffer[2] & 0xc0) == 0xc0) { + PRINT_WARN("received an IDX TERMINATE " + "with cause code 0x%02x%s\n", + buffer[4], + ((buffer[4] == 0x22) ? + " -- try another portname" : "")); + QETH_DBF_TEXT(trace, 2, "ckidxres"); + QETH_DBF_TEXT(trace, 2, " idxterm"); + QETH_DBF_TEXT_(trace, 2, " rc%d", -EIO); + return -EIO; + } + return 0; +} + +static void qeth_setup_ccw(struct qeth_channel *channel, unsigned char *iob, + __u32 len) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 4, "setupccw"); + card = CARD_FROM_CDEV(channel->ccwdev); + if (channel == &card->read) + memcpy(&channel->ccw, READ_CCW, sizeof(struct ccw1)); + else + memcpy(&channel->ccw, WRITE_CCW, sizeof(struct ccw1)); + channel->ccw.count = len; + channel->ccw.cda = (__u32) __pa(iob); +} + +static struct qeth_cmd_buffer *__qeth_get_buffer(struct qeth_channel *channel) +{ + __u8 index; + + QETH_DBF_TEXT(trace, 6, "getbuff"); + index = channel->io_buf_no; + do { + if (channel->iob[index].state == BUF_STATE_FREE) { + channel->iob[index].state = BUF_STATE_LOCKED; + channel->io_buf_no = (channel->io_buf_no + 1) % + QETH_CMD_BUFFER_NO; + memset(channel->iob[index].data, 0, QETH_BUFSIZE); + return channel->iob + index; + } + index = (index + 1) % QETH_CMD_BUFFER_NO; + } while (index != channel->io_buf_no); + + return NULL; +} + +void qeth_release_buffer(struct qeth_channel *channel, + struct qeth_cmd_buffer *iob) +{ + unsigned long flags; + + QETH_DBF_TEXT(trace, 6, "relbuff"); + spin_lock_irqsave(&channel->iob_lock, flags); + memset(iob->data, 0, QETH_BUFSIZE); + iob->state = BUF_STATE_FREE; + iob->callback = qeth_send_control_data_cb; + iob->rc = 0; + spin_unlock_irqrestore(&channel->iob_lock, flags); +} +EXPORT_SYMBOL_GPL(qeth_release_buffer); + +static struct qeth_cmd_buffer *qeth_get_buffer(struct qeth_channel *channel) +{ + struct qeth_cmd_buffer *buffer = NULL; + unsigned long flags; + + spin_lock_irqsave(&channel->iob_lock, flags); + buffer = __qeth_get_buffer(channel); + spin_unlock_irqrestore(&channel->iob_lock, flags); + return buffer; +} + +struct qeth_cmd_buffer *qeth_wait_for_buffer(struct qeth_channel *channel) +{ + struct qeth_cmd_buffer *buffer; + wait_event(channel->wait_q, + ((buffer = qeth_get_buffer(channel)) != NULL)); + return buffer; +} +EXPORT_SYMBOL_GPL(qeth_wait_for_buffer); + +void qeth_clear_cmd_buffers(struct qeth_channel *channel) +{ + int cnt; + + for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) + qeth_release_buffer(channel, &channel->iob[cnt]); + channel->buf_no = 0; + channel->io_buf_no = 0; +} +EXPORT_SYMBOL_GPL(qeth_clear_cmd_buffers); + +static void qeth_send_control_data_cb(struct qeth_channel *channel, + struct qeth_cmd_buffer *iob) +{ + struct qeth_card *card; + struct qeth_reply *reply, *r; + struct qeth_ipa_cmd *cmd; + unsigned long flags; + int keep_reply; + + QETH_DBF_TEXT(trace, 4, "sndctlcb"); + + card = CARD_FROM_CDEV(channel->ccwdev); + if (qeth_check_idx_response(iob->data)) { + qeth_clear_ipacmd_list(card); + qeth_schedule_recovery(card); + goto out; + } + + cmd = qeth_check_ipa_data(card, iob); + if ((cmd == NULL) && (card->state != CARD_STATE_DOWN)) + goto out; + /*in case of OSN : check if cmd is set */ + if (card->info.type == QETH_CARD_TYPE_OSN && + cmd && + cmd->hdr.command != IPA_CMD_STARTLAN && + card->osn_info.assist_cb != NULL) { + card->osn_info.assist_cb(card->dev, cmd); + goto out; + } + + spin_lock_irqsave(&card->lock, flags); + list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { + if ((reply->seqno == QETH_IDX_COMMAND_SEQNO) || + ((cmd) && (reply->seqno == cmd->hdr.seqno))) { + qeth_get_reply(reply); + list_del_init(&reply->list); + spin_unlock_irqrestore(&card->lock, flags); + keep_reply = 0; + if (reply->callback != NULL) { + if (cmd) { + reply->offset = (__u16)((char *)cmd - + (char *)iob->data); + keep_reply = reply->callback(card, + reply, + (unsigned long)cmd); + } else + keep_reply = reply->callback(card, + reply, + (unsigned long)iob); + } + if (cmd) + reply->rc = (u16) cmd->hdr.return_code; + else if (iob->rc) + reply->rc = iob->rc; + if (keep_reply) { + spin_lock_irqsave(&card->lock, flags); + list_add_tail(&reply->list, + &card->cmd_waiter_list); + spin_unlock_irqrestore(&card->lock, flags); + } else { + atomic_inc(&reply->received); + wake_up(&reply->wait_q); + } + qeth_put_reply(reply); + goto out; + } + } + spin_unlock_irqrestore(&card->lock, flags); +out: + memcpy(&card->seqno.pdu_hdr_ack, + QETH_PDU_HEADER_SEQ_NO(iob->data), + QETH_SEQ_NO_LENGTH); + qeth_release_buffer(channel, iob); +} + +static int qeth_setup_channel(struct qeth_channel *channel) +{ + int cnt; + + QETH_DBF_TEXT(setup, 2, "setupch"); + for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) { + channel->iob[cnt].data = (char *) + kmalloc(QETH_BUFSIZE, GFP_DMA|GFP_KERNEL); + if (channel->iob[cnt].data == NULL) + break; + channel->iob[cnt].state = BUF_STATE_FREE; + channel->iob[cnt].channel = channel; + channel->iob[cnt].callback = qeth_send_control_data_cb; + channel->iob[cnt].rc = 0; + } + if (cnt < QETH_CMD_BUFFER_NO) { + while (cnt-- > 0) + kfree(channel->iob[cnt].data); + return -ENOMEM; + } + channel->buf_no = 0; + channel->io_buf_no = 0; + atomic_set(&channel->irq_pending, 0); + spin_lock_init(&channel->iob_lock); + + init_waitqueue_head(&channel->wait_q); + return 0; +} + +static int qeth_set_thread_start_bit(struct qeth_card *card, + unsigned long thread) +{ + unsigned long flags; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + if (!(card->thread_allowed_mask & thread) || + (card->thread_start_mask & thread)) { + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + return -EPERM; + } + card->thread_start_mask |= thread; + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + return 0; +} + +void qeth_clear_thread_start_bit(struct qeth_card *card, unsigned long thread) +{ + unsigned long flags; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + card->thread_start_mask &= ~thread; + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + wake_up(&card->wait_q); +} +EXPORT_SYMBOL_GPL(qeth_clear_thread_start_bit); + +void qeth_clear_thread_running_bit(struct qeth_card *card, unsigned long thread) +{ + unsigned long flags; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + card->thread_running_mask &= ~thread; + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + wake_up(&card->wait_q); +} +EXPORT_SYMBOL_GPL(qeth_clear_thread_running_bit); + +static int __qeth_do_run_thread(struct qeth_card *card, unsigned long thread) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + if (card->thread_start_mask & thread) { + if ((card->thread_allowed_mask & thread) && + !(card->thread_running_mask & thread)) { + rc = 1; + card->thread_start_mask &= ~thread; + card->thread_running_mask |= thread; + } else + rc = -EPERM; + } + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + return rc; +} + +int qeth_do_run_thread(struct qeth_card *card, unsigned long thread) +{ + int rc = 0; + + wait_event(card->wait_q, + (rc = __qeth_do_run_thread(card, thread)) >= 0); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_do_run_thread); + +void qeth_schedule_recovery(struct qeth_card *card) +{ + QETH_DBF_TEXT(trace, 2, "startrec"); + if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0) + schedule_work(&card->kernel_thread_starter); +} +EXPORT_SYMBOL_GPL(qeth_schedule_recovery); + +static int qeth_get_problem(struct ccw_device *cdev, struct irb *irb) +{ + int dstat, cstat; + char *sense; + + sense = (char *) irb->ecw; + cstat = irb->scsw.cstat; + dstat = irb->scsw.dstat; + + if (cstat & (SCHN_STAT_CHN_CTRL_CHK | SCHN_STAT_INTF_CTRL_CHK | + SCHN_STAT_CHN_DATA_CHK | SCHN_STAT_CHAIN_CHECK | + SCHN_STAT_PROT_CHECK | SCHN_STAT_PROG_CHECK)) { + QETH_DBF_TEXT(trace, 2, "CGENCHK"); + PRINT_WARN("check on device %s, dstat=x%x, cstat=x%x ", + cdev->dev.bus_id, dstat, cstat); + print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET, + 16, 1, irb, 64, 1); + return 1; + } + + if (dstat & DEV_STAT_UNIT_CHECK) { + if (sense[SENSE_RESETTING_EVENT_BYTE] & + SENSE_RESETTING_EVENT_FLAG) { + QETH_DBF_TEXT(trace, 2, "REVIND"); + return 1; + } + if (sense[SENSE_COMMAND_REJECT_BYTE] & + SENSE_COMMAND_REJECT_FLAG) { + QETH_DBF_TEXT(trace, 2, "CMDREJi"); + return 0; + } + if ((sense[2] == 0xaf) && (sense[3] == 0xfe)) { + QETH_DBF_TEXT(trace, 2, "AFFE"); + return 1; + } + if ((!sense[0]) && (!sense[1]) && (!sense[2]) && (!sense[3])) { + QETH_DBF_TEXT(trace, 2, "ZEROSEN"); + return 0; + } + QETH_DBF_TEXT(trace, 2, "DGENCHK"); + return 1; + } + return 0; +} + +static long __qeth_check_irb_error(struct ccw_device *cdev, + unsigned long intparm, struct irb *irb) +{ + if (!IS_ERR(irb)) + return 0; + + switch (PTR_ERR(irb)) { + case -EIO: + PRINT_WARN("i/o-error on device %s\n", cdev->dev.bus_id); + QETH_DBF_TEXT(trace, 2, "ckirberr"); + QETH_DBF_TEXT_(trace, 2, " rc%d", -EIO); + break; + case -ETIMEDOUT: + PRINT_WARN("timeout on device %s\n", cdev->dev.bus_id); + QETH_DBF_TEXT(trace, 2, "ckirberr"); + QETH_DBF_TEXT_(trace, 2, " rc%d", -ETIMEDOUT); + if (intparm == QETH_RCD_PARM) { + struct qeth_card *card = CARD_FROM_CDEV(cdev); + + if (card && (card->data.ccwdev == cdev)) { + card->data.state = CH_STATE_DOWN; + wake_up(&card->wait_q); + } + } + break; + default: + PRINT_WARN("unknown error %ld on device %s\n", PTR_ERR(irb), + cdev->dev.bus_id); + QETH_DBF_TEXT(trace, 2, "ckirberr"); + QETH_DBF_TEXT(trace, 2, " rc???"); + } + return PTR_ERR(irb); +} + +static void qeth_irq(struct ccw_device *cdev, unsigned long intparm, + struct irb *irb) +{ + int rc; + int cstat, dstat; + struct qeth_cmd_buffer *buffer; + struct qeth_channel *channel; + struct qeth_card *card; + struct qeth_cmd_buffer *iob; + __u8 index; + + QETH_DBF_TEXT(trace, 5, "irq"); + + if (__qeth_check_irb_error(cdev, intparm, irb)) + return; + cstat = irb->scsw.cstat; + dstat = irb->scsw.dstat; + + card = CARD_FROM_CDEV(cdev); + if (!card) + return; + + if (card->read.ccwdev == cdev) { + channel = &card->read; + QETH_DBF_TEXT(trace, 5, "read"); + } else if (card->write.ccwdev == cdev) { + channel = &card->write; + QETH_DBF_TEXT(trace, 5, "write"); + } else { + channel = &card->data; + QETH_DBF_TEXT(trace, 5, "data"); + } + atomic_set(&channel->irq_pending, 0); + + if (irb->scsw.fctl & (SCSW_FCTL_CLEAR_FUNC)) + channel->state = CH_STATE_STOPPED; + + if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC)) + channel->state = CH_STATE_HALTED; + + /*let's wake up immediately on data channel*/ + if ((channel == &card->data) && (intparm != 0) && + (intparm != QETH_RCD_PARM)) + goto out; + + if (intparm == QETH_CLEAR_CHANNEL_PARM) { + QETH_DBF_TEXT(trace, 6, "clrchpar"); + /* we don't have to handle this further */ + intparm = 0; + } + if (intparm == QETH_HALT_CHANNEL_PARM) { + QETH_DBF_TEXT(trace, 6, "hltchpar"); + /* we don't have to handle this further */ + intparm = 0; + } + if ((dstat & DEV_STAT_UNIT_EXCEP) || + (dstat & DEV_STAT_UNIT_CHECK) || + (cstat)) { + if (irb->esw.esw0.erw.cons) { + /* TODO: we should make this s390dbf */ + PRINT_WARN("sense data available on channel %s.\n", + CHANNEL_ID(channel)); + PRINT_WARN(" cstat 0x%X\n dstat 0x%X\n", cstat, dstat); + print_hex_dump(KERN_WARNING, "qeth: irb ", + DUMP_PREFIX_OFFSET, 16, 1, irb, 32, 1); + print_hex_dump(KERN_WARNING, "qeth: sense data ", + DUMP_PREFIX_OFFSET, 16, 1, irb->ecw, 32, 1); + } + if (intparm == QETH_RCD_PARM) { + channel->state = CH_STATE_DOWN; + goto out; + } + rc = qeth_get_problem(cdev, irb); + if (rc) { + qeth_schedule_recovery(card); + goto out; + } + } + + if (intparm == QETH_RCD_PARM) { + channel->state = CH_STATE_RCD_DONE; + goto out; + } + if (intparm) { + buffer = (struct qeth_cmd_buffer *) __va((addr_t)intparm); + buffer->state = BUF_STATE_PROCESSED; + } + if (channel == &card->data) + return; + if (channel == &card->read && + channel->state == CH_STATE_UP) + qeth_issue_next_read(card); + + iob = channel->iob; + index = channel->buf_no; + while (iob[index].state == BUF_STATE_PROCESSED) { + if (iob[index].callback != NULL) + iob[index].callback(channel, iob + index); + + index = (index + 1) % QETH_CMD_BUFFER_NO; + } + channel->buf_no = index; +out: + wake_up(&card->wait_q); + return; +} + +static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, + struct qeth_qdio_out_buffer *buf) +{ + int i; + struct sk_buff *skb; + + /* is PCI flag set on buffer? */ + if (buf->buffer->element[0].flags & 0x40) + atomic_dec(&queue->set_pci_flags_count); + + skb = skb_dequeue(&buf->skb_list); + while (skb) { + atomic_dec(&skb->users); + dev_kfree_skb_any(skb); + skb = skb_dequeue(&buf->skb_list); + } + qeth_eddp_buf_release_contexts(buf); + for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) { + buf->buffer->element[i].length = 0; + buf->buffer->element[i].addr = NULL; + buf->buffer->element[i].flags = 0; + } + buf->next_element_to_fill = 0; + atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY); +} + +void qeth_clear_qdio_buffers(struct qeth_card *card) +{ + int i, j; + + QETH_DBF_TEXT(trace, 2, "clearqdbf"); + /* clear outbound buffers to free skbs */ + for (i = 0; i < card->qdio.no_out_queues; ++i) + if (card->qdio.out_qs[i]) { + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) + qeth_clear_output_buffer(card->qdio.out_qs[i], + &card->qdio.out_qs[i]->bufs[j]); + } +} +EXPORT_SYMBOL_GPL(qeth_clear_qdio_buffers); + +static void qeth_free_buffer_pool(struct qeth_card *card) +{ + struct qeth_buffer_pool_entry *pool_entry, *tmp; + int i = 0; + QETH_DBF_TEXT(trace, 5, "freepool"); + list_for_each_entry_safe(pool_entry, tmp, + &card->qdio.init_pool.entry_list, init_list){ + for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) + free_page((unsigned long)pool_entry->elements[i]); + list_del(&pool_entry->init_list); + kfree(pool_entry); + } +} + +static void qeth_free_qdio_buffers(struct qeth_card *card) +{ + int i, j; + + QETH_DBF_TEXT(trace, 2, "freeqdbf"); + if (atomic_xchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED) == + QETH_QDIO_UNINITIALIZED) + return; + kfree(card->qdio.in_q); + card->qdio.in_q = NULL; + /* inbound buffer pool */ + qeth_free_buffer_pool(card); + /* free outbound qdio_qs */ + if (card->qdio.out_qs) { + for (i = 0; i < card->qdio.no_out_queues; ++i) { + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) + qeth_clear_output_buffer(card->qdio.out_qs[i], + &card->qdio.out_qs[i]->bufs[j]); + kfree(card->qdio.out_qs[i]); + } + kfree(card->qdio.out_qs); + card->qdio.out_qs = NULL; + } +} + +static void qeth_clean_channel(struct qeth_channel *channel) +{ + int cnt; + + QETH_DBF_TEXT(setup, 2, "freech"); + for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) + kfree(channel->iob[cnt].data); +} + +static int qeth_is_1920_device(struct qeth_card *card) +{ + int single_queue = 0; + struct ccw_device *ccwdev; + struct channelPath_dsc { + u8 flags; + u8 lsn; + u8 desc; + u8 chpid; + u8 swla; + u8 zeroes; + u8 chla; + u8 chpp; + } *chp_dsc; + + QETH_DBF_TEXT(setup, 2, "chk_1920"); + + ccwdev = card->data.ccwdev; + chp_dsc = (struct channelPath_dsc *)ccw_device_get_chp_desc(ccwdev, 0); + if (chp_dsc != NULL) { + /* CHPP field bit 6 == 1 -> single queue */ + single_queue = ((chp_dsc->chpp & 0x02) == 0x02); + kfree(chp_dsc); + } + QETH_DBF_TEXT_(setup, 2, "rc:%x", single_queue); + return single_queue; +} + +static void qeth_init_qdio_info(struct qeth_card *card) +{ + QETH_DBF_TEXT(setup, 4, "intqdinf"); + atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED); + /* inbound */ + card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT; + card->qdio.init_pool.buf_count = QETH_IN_BUF_COUNT_DEFAULT; + card->qdio.in_buf_pool.buf_count = card->qdio.init_pool.buf_count; + INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list); + INIT_LIST_HEAD(&card->qdio.init_pool.entry_list); +} + +static void qeth_set_intial_options(struct qeth_card *card) +{ + card->options.route4.type = NO_ROUTER; + card->options.route6.type = NO_ROUTER; + card->options.checksum_type = QETH_CHECKSUM_DEFAULT; + card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; + card->options.macaddr_mode = QETH_TR_MACADDR_NONCANONICAL; + card->options.fake_broadcast = 0; + card->options.add_hhlen = DEFAULT_ADD_HHLEN; + card->options.fake_ll = 0; + card->options.performance_stats = 0; + card->options.rx_sg_cb = QETH_RX_SG_CB; +} + +static int qeth_do_start_thread(struct qeth_card *card, unsigned long thread) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&card->thread_mask_lock, flags); + QETH_DBF_TEXT_(trace, 4, " %02x%02x%02x", + (u8) card->thread_start_mask, + (u8) card->thread_allowed_mask, + (u8) card->thread_running_mask); + rc = (card->thread_start_mask & thread); + spin_unlock_irqrestore(&card->thread_mask_lock, flags); + return rc; +} + +static void qeth_start_kernel_thread(struct work_struct *work) +{ + struct qeth_card *card = container_of(work, struct qeth_card, + kernel_thread_starter); + QETH_DBF_TEXT(trace , 2, "strthrd"); + + if (card->read.state != CH_STATE_UP && + card->write.state != CH_STATE_UP) + return; + if (qeth_do_start_thread(card, QETH_RECOVER_THREAD)) + kthread_run(card->discipline.recover, (void *) card, + "qeth_recover"); +} + +static int qeth_setup_card(struct qeth_card *card) +{ + + QETH_DBF_TEXT(setup, 2, "setupcrd"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + + card->read.state = CH_STATE_DOWN; + card->write.state = CH_STATE_DOWN; + card->data.state = CH_STATE_DOWN; + card->state = CARD_STATE_DOWN; + card->lan_online = 0; + card->use_hard_stop = 0; + card->dev = NULL; + spin_lock_init(&card->vlanlock); + spin_lock_init(&card->mclock); + card->vlangrp = NULL; + spin_lock_init(&card->lock); + spin_lock_init(&card->ip_lock); + spin_lock_init(&card->thread_mask_lock); + card->thread_start_mask = 0; + card->thread_allowed_mask = 0; + card->thread_running_mask = 0; + INIT_WORK(&card->kernel_thread_starter, qeth_start_kernel_thread); + INIT_LIST_HEAD(&card->ip_list); + card->ip_tbd_list = kmalloc(sizeof(struct list_head), GFP_KERNEL); + if (!card->ip_tbd_list) { + QETH_DBF_TEXT(setup, 0, "iptbdnom"); + return -ENOMEM; + } + INIT_LIST_HEAD(card->ip_tbd_list); + INIT_LIST_HEAD(&card->cmd_waiter_list); + init_waitqueue_head(&card->wait_q); + /* intial options */ + qeth_set_intial_options(card); + /* IP address takeover */ + INIT_LIST_HEAD(&card->ipato.entries); + card->ipato.enabled = 0; + card->ipato.invert4 = 0; + card->ipato.invert6 = 0; + /* init QDIO stuff */ + qeth_init_qdio_info(card); + return 0; +} + +static struct qeth_card *qeth_alloc_card(void) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(setup, 2, "alloccrd"); + card = kzalloc(sizeof(struct qeth_card), GFP_DMA|GFP_KERNEL); + if (!card) + return NULL; + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + if (qeth_setup_channel(&card->read)) { + kfree(card); + return NULL; + } + if (qeth_setup_channel(&card->write)) { + qeth_clean_channel(&card->read); + kfree(card); + return NULL; + } + card->options.layer2 = -1; + return card; +} + +static int qeth_determine_card_type(struct qeth_card *card) +{ + int i = 0; + + QETH_DBF_TEXT(setup, 2, "detcdtyp"); + + card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + while (known_devices[i][4]) { + if ((CARD_RDEV(card)->id.dev_type == known_devices[i][2]) && + (CARD_RDEV(card)->id.dev_model == known_devices[i][3])) { + card->info.type = known_devices[i][4]; + card->qdio.no_out_queues = known_devices[i][8]; + card->info.is_multicast_different = known_devices[i][9]; + if (qeth_is_1920_device(card)) { + PRINT_INFO("Priority Queueing not able " + "due to hardware limitations!\n"); + card->qdio.no_out_queues = 1; + card->qdio.default_out_queue = 0; + } + return 0; + } + i++; + } + card->info.type = QETH_CARD_TYPE_UNKNOWN; + PRINT_ERR("unknown card type on device %s\n", CARD_BUS_ID(card)); + return -ENOENT; +} + +static int qeth_clear_channel(struct qeth_channel *channel) +{ + unsigned long flags; + struct qeth_card *card; + int rc; + + QETH_DBF_TEXT(trace, 3, "clearch"); + card = CARD_FROM_CDEV(channel->ccwdev); + spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); + rc = ccw_device_clear(channel->ccwdev, QETH_CLEAR_CHANNEL_PARM); + spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); + + if (rc) + return rc; + rc = wait_event_interruptible_timeout(card->wait_q, + channel->state == CH_STATE_STOPPED, QETH_TIMEOUT); + if (rc == -ERESTARTSYS) + return rc; + if (channel->state != CH_STATE_STOPPED) + return -ETIME; + channel->state = CH_STATE_DOWN; + return 0; +} + +static int qeth_halt_channel(struct qeth_channel *channel) +{ + unsigned long flags; + struct qeth_card *card; + int rc; + + QETH_DBF_TEXT(trace, 3, "haltch"); + card = CARD_FROM_CDEV(channel->ccwdev); + spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); + rc = ccw_device_halt(channel->ccwdev, QETH_HALT_CHANNEL_PARM); + spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); + + if (rc) + return rc; + rc = wait_event_interruptible_timeout(card->wait_q, + channel->state == CH_STATE_HALTED, QETH_TIMEOUT); + if (rc == -ERESTARTSYS) + return rc; + if (channel->state != CH_STATE_HALTED) + return -ETIME; + return 0; +} + +static int qeth_halt_channels(struct qeth_card *card) +{ + int rc1 = 0, rc2 = 0, rc3 = 0; + + QETH_DBF_TEXT(trace, 3, "haltchs"); + rc1 = qeth_halt_channel(&card->read); + rc2 = qeth_halt_channel(&card->write); + rc3 = qeth_halt_channel(&card->data); + if (rc1) + return rc1; + if (rc2) + return rc2; + return rc3; +} + +static int qeth_clear_channels(struct qeth_card *card) +{ + int rc1 = 0, rc2 = 0, rc3 = 0; + + QETH_DBF_TEXT(trace, 3, "clearchs"); + rc1 = qeth_clear_channel(&card->read); + rc2 = qeth_clear_channel(&card->write); + rc3 = qeth_clear_channel(&card->data); + if (rc1) + return rc1; + if (rc2) + return rc2; + return rc3; +} + +static int qeth_clear_halt_card(struct qeth_card *card, int halt) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "clhacrd"); + QETH_DBF_HEX(trace, 3, &card, sizeof(void *)); + + if (halt) + rc = qeth_halt_channels(card); + if (rc) + return rc; + return qeth_clear_channels(card); +} + +int qeth_qdio_clear_card(struct qeth_card *card, int use_halt) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "qdioclr"); + switch (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ESTABLISHED, + QETH_QDIO_CLEANING)) { + case QETH_QDIO_ESTABLISHED: + if (card->info.type == QETH_CARD_TYPE_IQD) + rc = qdio_cleanup(CARD_DDEV(card), + QDIO_FLAG_CLEANUP_USING_HALT); + else + rc = qdio_cleanup(CARD_DDEV(card), + QDIO_FLAG_CLEANUP_USING_CLEAR); + if (rc) + QETH_DBF_TEXT_(trace, 3, "1err%d", rc); + atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED); + break; + case QETH_QDIO_CLEANING: + return rc; + default: + break; + } + rc = qeth_clear_halt_card(card, use_halt); + if (rc) + QETH_DBF_TEXT_(trace, 3, "2err%d", rc); + card->state = CARD_STATE_DOWN; + return rc; +} +EXPORT_SYMBOL_GPL(qeth_qdio_clear_card); + +static int qeth_read_conf_data(struct qeth_card *card, void **buffer, + int *length) +{ + struct ciw *ciw; + char *rcd_buf; + int ret; + struct qeth_channel *channel = &card->data; + unsigned long flags; + + /* + * scan for RCD command in extended SenseID data + */ + ciw = ccw_device_get_ciw(channel->ccwdev, CIW_TYPE_RCD); + if (!ciw || ciw->cmd == 0) + return -EOPNOTSUPP; + rcd_buf = kzalloc(ciw->count, GFP_KERNEL | GFP_DMA); + if (!rcd_buf) + return -ENOMEM; + + channel->ccw.cmd_code = ciw->cmd; + channel->ccw.cda = (__u32) __pa(rcd_buf); + channel->ccw.count = ciw->count; + channel->ccw.flags = CCW_FLAG_SLI; + channel->state = CH_STATE_RCD; + spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); + ret = ccw_device_start_timeout(channel->ccwdev, &channel->ccw, + QETH_RCD_PARM, LPM_ANYPATH, 0, + QETH_RCD_TIMEOUT); + spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); + if (!ret) + wait_event(card->wait_q, + (channel->state == CH_STATE_RCD_DONE || + channel->state == CH_STATE_DOWN)); + if (channel->state == CH_STATE_DOWN) + ret = -EIO; + else + channel->state = CH_STATE_DOWN; + if (ret) { + kfree(rcd_buf); + *buffer = NULL; + *length = 0; + } else { + *length = ciw->count; + *buffer = rcd_buf; + } + return ret; +} + +static int qeth_get_unitaddr(struct qeth_card *card) +{ + int length; + char *prcd; + int rc; + + QETH_DBF_TEXT(setup, 2, "getunit"); + rc = qeth_read_conf_data(card, (void **) &prcd, &length); + if (rc) { + PRINT_ERR("qeth_read_conf_data for device %s returned %i\n", + CARD_DDEV_ID(card), rc); + return rc; + } + card->info.chpid = prcd[30]; + card->info.unit_addr2 = prcd[31]; + card->info.cula = prcd[63]; + card->info.guestlan = ((prcd[0x10] == _ascebc['V']) && + (prcd[0x11] == _ascebc['M'])); + kfree(prcd); + return 0; +} + +static void qeth_init_tokens(struct qeth_card *card) +{ + card->token.issuer_rm_w = 0x00010103UL; + card->token.cm_filter_w = 0x00010108UL; + card->token.cm_connection_w = 0x0001010aUL; + card->token.ulp_filter_w = 0x0001010bUL; + card->token.ulp_connection_w = 0x0001010dUL; +} + +static void qeth_init_func_level(struct qeth_card *card) +{ + if (card->ipato.enabled) { + if (card->info.type == QETH_CARD_TYPE_IQD) + card->info.func_level = + QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT; + else + card->info.func_level = + QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT; + } else { + if (card->info.type == QETH_CARD_TYPE_IQD) + /*FIXME:why do we have same values for dis and ena for + osae??? */ + card->info.func_level = + QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT; + else + card->info.func_level = + QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT; + } +} + +static inline __u16 qeth_raw_devno_from_bus_id(char *id) +{ + id += (strlen(id) - 4); + return (__u16) simple_strtoul(id, &id, 16); +} + +static int qeth_idx_activate_get_answer(struct qeth_channel *channel, + void (*idx_reply_cb)(struct qeth_channel *, + struct qeth_cmd_buffer *)) +{ + struct qeth_cmd_buffer *iob; + unsigned long flags; + int rc; + struct qeth_card *card; + + QETH_DBF_TEXT(setup, 2, "idxanswr"); + card = CARD_FROM_CDEV(channel->ccwdev); + iob = qeth_get_buffer(channel); + iob->callback = idx_reply_cb; + memcpy(&channel->ccw, READ_CCW, sizeof(struct ccw1)); + channel->ccw.count = QETH_BUFSIZE; + channel->ccw.cda = (__u32) __pa(iob->data); + + wait_event(card->wait_q, + atomic_cmpxchg(&channel->irq_pending, 0, 1) == 0); + QETH_DBF_TEXT(setup, 6, "noirqpnd"); + spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); + rc = ccw_device_start(channel->ccwdev, + &channel->ccw, (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); + + if (rc) { + PRINT_ERR("Error2 in activating channel rc=%d\n", rc); + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + atomic_set(&channel->irq_pending, 0); + wake_up(&card->wait_q); + return rc; + } + rc = wait_event_interruptible_timeout(card->wait_q, + channel->state == CH_STATE_UP, QETH_TIMEOUT); + if (rc == -ERESTARTSYS) + return rc; + if (channel->state != CH_STATE_UP) { + rc = -ETIME; + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + qeth_clear_cmd_buffers(channel); + } else + rc = 0; + return rc; +} + +static int qeth_idx_activate_channel(struct qeth_channel *channel, + void (*idx_reply_cb)(struct qeth_channel *, + struct qeth_cmd_buffer *)) +{ + struct qeth_card *card; + struct qeth_cmd_buffer *iob; + unsigned long flags; + __u16 temp; + __u8 tmp; + int rc; + + card = CARD_FROM_CDEV(channel->ccwdev); + + QETH_DBF_TEXT(setup, 2, "idxactch"); + + iob = qeth_get_buffer(channel); + iob->callback = idx_reply_cb; + memcpy(&channel->ccw, WRITE_CCW, sizeof(struct ccw1)); + channel->ccw.count = IDX_ACTIVATE_SIZE; + channel->ccw.cda = (__u32) __pa(iob->data); + if (channel == &card->write) { + memcpy(iob->data, IDX_ACTIVATE_WRITE, IDX_ACTIVATE_SIZE); + memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), + &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.trans_hdr++; + } else { + memcpy(iob->data, IDX_ACTIVATE_READ, IDX_ACTIVATE_SIZE); + memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), + &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); + } + tmp = ((__u8)card->info.portno) | 0x80; + memcpy(QETH_IDX_ACT_PNO(iob->data), &tmp, 1); + memcpy(QETH_IDX_ACT_ISSUER_RM_TOKEN(iob->data), + &card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data), + &card->info.func_level, sizeof(__u16)); + temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card)); + memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2); + temp = (card->info.cula << 8) + card->info.unit_addr2; + memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2); + + wait_event(card->wait_q, + atomic_cmpxchg(&channel->irq_pending, 0, 1) == 0); + QETH_DBF_TEXT(setup, 6, "noirqpnd"); + spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); + rc = ccw_device_start(channel->ccwdev, + &channel->ccw, (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); + + if (rc) { + PRINT_ERR("Error1 in activating channel. rc=%d\n", rc); + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + atomic_set(&channel->irq_pending, 0); + wake_up(&card->wait_q); + return rc; + } + rc = wait_event_interruptible_timeout(card->wait_q, + channel->state == CH_STATE_ACTIVATING, QETH_TIMEOUT); + if (rc == -ERESTARTSYS) + return rc; + if (channel->state != CH_STATE_ACTIVATING) { + PRINT_WARN("IDX activate timed out!\n"); + QETH_DBF_TEXT_(setup, 2, "2err%d", -ETIME); + qeth_clear_cmd_buffers(channel); + return -ETIME; + } + return qeth_idx_activate_get_answer(channel, idx_reply_cb); +} + +static int qeth_peer_func_level(int level) +{ + if ((level & 0xff) == 8) + return (level & 0xff) + 0x400; + if (((level >> 8) & 3) == 1) + return (level & 0xff) + 0x200; + return level; +} + +static void qeth_idx_write_cb(struct qeth_channel *channel, + struct qeth_cmd_buffer *iob) +{ + struct qeth_card *card; + __u16 temp; + + QETH_DBF_TEXT(setup , 2, "idxwrcb"); + + if (channel->state == CH_STATE_DOWN) { + channel->state = CH_STATE_ACTIVATING; + goto out; + } + card = CARD_FROM_CDEV(channel->ccwdev); + + if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) { + if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19) + PRINT_ERR("IDX_ACTIVATE on write channel device %s: " + "adapter exclusively used by another host\n", + CARD_WDEV_ID(card)); + else + PRINT_ERR("IDX_ACTIVATE on write channel device %s: " + "negative reply\n", CARD_WDEV_ID(card)); + goto out; + } + memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); + if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) { + PRINT_WARN("IDX_ACTIVATE on write channel device %s: " + "function level mismatch " + "(sent: 0x%x, received: 0x%x)\n", + CARD_WDEV_ID(card), card->info.func_level, temp); + goto out; + } + channel->state = CH_STATE_UP; +out: + qeth_release_buffer(channel, iob); +} + +static void qeth_idx_read_cb(struct qeth_channel *channel, + struct qeth_cmd_buffer *iob) +{ + struct qeth_card *card; + __u16 temp; + + QETH_DBF_TEXT(setup , 2, "idxrdcb"); + if (channel->state == CH_STATE_DOWN) { + channel->state = CH_STATE_ACTIVATING; + goto out; + } + + card = CARD_FROM_CDEV(channel->ccwdev); + if (qeth_check_idx_response(iob->data)) + goto out; + + if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) { + if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19) + PRINT_ERR("IDX_ACTIVATE on read channel device %s: " + "adapter exclusively used by another host\n", + CARD_RDEV_ID(card)); + else + PRINT_ERR("IDX_ACTIVATE on read channel device %s: " + "negative reply\n", CARD_RDEV_ID(card)); + goto out; + } + +/** + * temporary fix for microcode bug + * to revert it,replace OR by AND + */ + if ((!QETH_IDX_NO_PORTNAME_REQUIRED(iob->data)) || + (card->info.type == QETH_CARD_TYPE_OSAE)) + card->info.portname_required = 1; + + memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); + if (temp != qeth_peer_func_level(card->info.func_level)) { + PRINT_WARN("IDX_ACTIVATE on read channel device %s: function " + "level mismatch (sent: 0x%x, received: 0x%x)\n", + CARD_RDEV_ID(card), card->info.func_level, temp); + goto out; + } + memcpy(&card->token.issuer_rm_r, + QETH_IDX_ACT_ISSUER_RM_TOKEN(iob->data), + QETH_MPC_TOKEN_LENGTH); + memcpy(&card->info.mcl_level[0], + QETH_IDX_REPLY_LEVEL(iob->data), QETH_MCL_LENGTH); + channel->state = CH_STATE_UP; +out: + qeth_release_buffer(channel, iob); +} + +void qeth_prepare_control_data(struct qeth_card *card, int len, + struct qeth_cmd_buffer *iob) +{ + qeth_setup_ccw(&card->write, iob->data, len); + iob->callback = qeth_release_buffer; + + memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), + &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.trans_hdr++; + memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), + &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.pdu_hdr++; + memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), + &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); + QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); +} +EXPORT_SYMBOL_GPL(qeth_prepare_control_data); + +int qeth_send_control_data(struct qeth_card *card, int len, + struct qeth_cmd_buffer *iob, + int (*reply_cb)(struct qeth_card *, struct qeth_reply *, + unsigned long), + void *reply_param) +{ + int rc; + unsigned long flags; + struct qeth_reply *reply = NULL; + unsigned long timeout; + + QETH_DBF_TEXT(trace, 2, "sendctl"); + + reply = qeth_alloc_reply(card); + if (!reply) { + PRINT_WARN("Could no alloc qeth_reply!\n"); + return -ENOMEM; + } + reply->callback = reply_cb; + reply->param = reply_param; + if (card->state == CARD_STATE_DOWN) + reply->seqno = QETH_IDX_COMMAND_SEQNO; + else + reply->seqno = card->seqno.ipa++; + init_waitqueue_head(&reply->wait_q); + spin_lock_irqsave(&card->lock, flags); + list_add_tail(&reply->list, &card->cmd_waiter_list); + spin_unlock_irqrestore(&card->lock, flags); + QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); + + while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ; + qeth_prepare_control_data(card, len, iob); + + if (IS_IPA(iob->data)) + timeout = jiffies + QETH_IPA_TIMEOUT; + else + timeout = jiffies + QETH_TIMEOUT; + + QETH_DBF_TEXT(trace, 6, "noirqpnd"); + spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); + rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, + (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); + if (rc) { + PRINT_WARN("qeth_send_control_data: " + "ccw_device_start rc = %i\n", rc); + QETH_DBF_TEXT_(trace, 2, " err%d", rc); + spin_lock_irqsave(&card->lock, flags); + list_del_init(&reply->list); + qeth_put_reply(reply); + spin_unlock_irqrestore(&card->lock, flags); + qeth_release_buffer(iob->channel, iob); + atomic_set(&card->write.irq_pending, 0); + wake_up(&card->wait_q); + return rc; + } + while (!atomic_read(&reply->received)) { + if (time_after(jiffies, timeout)) { + spin_lock_irqsave(&reply->card->lock, flags); + list_del_init(&reply->list); + spin_unlock_irqrestore(&reply->card->lock, flags); + reply->rc = -ETIME; + atomic_inc(&reply->received); + wake_up(&reply->wait_q); + } + cpu_relax(); + }; + rc = reply->rc; + qeth_put_reply(reply); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_send_control_data); + +static int qeth_cm_enable_cb(struct qeth_card *card, struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "cmenblcb"); + + iob = (struct qeth_cmd_buffer *) data; + memcpy(&card->token.cm_filter_r, + QETH_CM_ENABLE_RESP_FILTER_TOKEN(iob->data), + QETH_MPC_TOKEN_LENGTH); + QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); + return 0; +} + +static int qeth_cm_enable(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "cmenable"); + + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data, CM_ENABLE, CM_ENABLE_SIZE); + memcpy(QETH_CM_ENABLE_ISSUER_RM_TOKEN(iob->data), + &card->token.issuer_rm_r, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_CM_ENABLE_FILTER_TOKEN(iob->data), + &card->token.cm_filter_w, QETH_MPC_TOKEN_LENGTH); + + rc = qeth_send_control_data(card, CM_ENABLE_SIZE, iob, + qeth_cm_enable_cb, NULL); + return rc; +} + +static int qeth_cm_setup_cb(struct qeth_card *card, struct qeth_reply *reply, + unsigned long data) +{ + + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "cmsetpcb"); + + iob = (struct qeth_cmd_buffer *) data; + memcpy(&card->token.cm_connection_r, + QETH_CM_SETUP_RESP_DEST_ADDR(iob->data), + QETH_MPC_TOKEN_LENGTH); + QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); + return 0; +} + +static int qeth_cm_setup(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "cmsetup"); + + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data, CM_SETUP, CM_SETUP_SIZE); + memcpy(QETH_CM_SETUP_DEST_ADDR(iob->data), + &card->token.issuer_rm_r, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_CM_SETUP_CONNECTION_TOKEN(iob->data), + &card->token.cm_connection_w, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_CM_SETUP_FILTER_TOKEN(iob->data), + &card->token.cm_filter_r, QETH_MPC_TOKEN_LENGTH); + rc = qeth_send_control_data(card, CM_SETUP_SIZE, iob, + qeth_cm_setup_cb, NULL); + return rc; + +} + +static inline int qeth_get_initial_mtu_for_card(struct qeth_card *card) +{ + switch (card->info.type) { + case QETH_CARD_TYPE_UNKNOWN: + return 1500; + case QETH_CARD_TYPE_IQD: + return card->info.max_mtu; + case QETH_CARD_TYPE_OSAE: + switch (card->info.link_type) { + case QETH_LINK_TYPE_HSTR: + case QETH_LINK_TYPE_LANE_TR: + return 2000; + default: + return 1492; + } + default: + return 1500; + } +} + +static inline int qeth_get_max_mtu_for_card(int cardtype) +{ + switch (cardtype) { + + case QETH_CARD_TYPE_UNKNOWN: + case QETH_CARD_TYPE_OSAE: + case QETH_CARD_TYPE_OSN: + return 61440; + case QETH_CARD_TYPE_IQD: + return 57344; + default: + return 1500; + } +} + +static inline int qeth_get_mtu_out_of_mpc(int cardtype) +{ + switch (cardtype) { + case QETH_CARD_TYPE_IQD: + return 1; + default: + return 0; + } +} + +static inline int qeth_get_mtu_outof_framesize(int framesize) +{ + switch (framesize) { + case 0x4000: + return 8192; + case 0x6000: + return 16384; + case 0xa000: + return 32768; + case 0xffff: + return 57344; + default: + return 0; + } +} + +static inline int qeth_mtu_is_valid(struct qeth_card *card, int mtu) +{ + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + return ((mtu >= 576) && (mtu <= 61440)); + case QETH_CARD_TYPE_IQD: + return ((mtu >= 576) && + (mtu <= card->info.max_mtu + 4096 - 32)); + case QETH_CARD_TYPE_OSN: + case QETH_CARD_TYPE_UNKNOWN: + default: + return 1; + } +} + +static int qeth_ulp_enable_cb(struct qeth_card *card, struct qeth_reply *reply, + unsigned long data) +{ + + __u16 mtu, framesize; + __u16 len; + __u8 link_type; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "ulpenacb"); + + iob = (struct qeth_cmd_buffer *) data; + memcpy(&card->token.ulp_filter_r, + QETH_ULP_ENABLE_RESP_FILTER_TOKEN(iob->data), + QETH_MPC_TOKEN_LENGTH); + if (qeth_get_mtu_out_of_mpc(card->info.type)) { + memcpy(&framesize, QETH_ULP_ENABLE_RESP_MAX_MTU(iob->data), 2); + mtu = qeth_get_mtu_outof_framesize(framesize); + if (!mtu) { + iob->rc = -EINVAL; + QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); + return 0; + } + card->info.max_mtu = mtu; + card->info.initial_mtu = mtu; + card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE; + } else { + card->info.initial_mtu = qeth_get_initial_mtu_for_card(card); + card->info.max_mtu = qeth_get_max_mtu_for_card(card->info.type); + card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT; + } + + memcpy(&len, QETH_ULP_ENABLE_RESP_DIFINFO_LEN(iob->data), 2); + if (len >= QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE) { + memcpy(&link_type, + QETH_ULP_ENABLE_RESP_LINK_TYPE(iob->data), 1); + card->info.link_type = link_type; + } else + card->info.link_type = 0; + QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); + return 0; +} + +static int qeth_ulp_enable(struct qeth_card *card) +{ + int rc; + char prot_type; + struct qeth_cmd_buffer *iob; + + /*FIXME: trace view callbacks*/ + QETH_DBF_TEXT(setup, 2, "ulpenabl"); + + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data, ULP_ENABLE, ULP_ENABLE_SIZE); + + *(QETH_ULP_ENABLE_LINKNUM(iob->data)) = + (__u8) card->info.portno; + if (card->options.layer2) + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; + else + prot_type = QETH_PROT_TCPIP; + + memcpy(QETH_ULP_ENABLE_PROT_TYPE(iob->data), &prot_type, 1); + memcpy(QETH_ULP_ENABLE_DEST_ADDR(iob->data), + &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_ULP_ENABLE_FILTER_TOKEN(iob->data), + &card->token.ulp_filter_w, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_ULP_ENABLE_PORTNAME_AND_LL(iob->data), + card->info.portname, 9); + rc = qeth_send_control_data(card, ULP_ENABLE_SIZE, iob, + qeth_ulp_enable_cb, NULL); + return rc; + +} + +static int qeth_ulp_setup_cb(struct qeth_card *card, struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "ulpstpcb"); + + iob = (struct qeth_cmd_buffer *) data; + memcpy(&card->token.ulp_connection_r, + QETH_ULP_SETUP_RESP_CONNECTION_TOKEN(iob->data), + QETH_MPC_TOKEN_LENGTH); + QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); + return 0; +} + +static int qeth_ulp_setup(struct qeth_card *card) +{ + int rc; + __u16 temp; + struct qeth_cmd_buffer *iob; + struct ccw_dev_id dev_id; + + QETH_DBF_TEXT(setup, 2, "ulpsetup"); + + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data, ULP_SETUP, ULP_SETUP_SIZE); + + memcpy(QETH_ULP_SETUP_DEST_ADDR(iob->data), + &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_ULP_SETUP_CONNECTION_TOKEN(iob->data), + &card->token.ulp_connection_w, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_ULP_SETUP_FILTER_TOKEN(iob->data), + &card->token.ulp_filter_r, QETH_MPC_TOKEN_LENGTH); + + ccw_device_get_id(CARD_DDEV(card), &dev_id); + memcpy(QETH_ULP_SETUP_CUA(iob->data), &dev_id.devno, 2); + temp = (card->info.cula << 8) + card->info.unit_addr2; + memcpy(QETH_ULP_SETUP_REAL_DEVADDR(iob->data), &temp, 2); + rc = qeth_send_control_data(card, ULP_SETUP_SIZE, iob, + qeth_ulp_setup_cb, NULL); + return rc; +} + +static int qeth_alloc_qdio_buffers(struct qeth_card *card) +{ + int i, j; + + QETH_DBF_TEXT(setup, 2, "allcqdbf"); + + if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED, + QETH_QDIO_ALLOCATED) != QETH_QDIO_UNINITIALIZED) + return 0; + + card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), + GFP_KERNEL|GFP_DMA); + if (!card->qdio.in_q) + goto out_nomem; + QETH_DBF_TEXT(setup, 2, "inq"); + QETH_DBF_HEX(setup, 2, &card->qdio.in_q, sizeof(void *)); + memset(card->qdio.in_q, 0, sizeof(struct qeth_qdio_q)); + /* give inbound qeth_qdio_buffers their qdio_buffers */ + for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; ++i) + card->qdio.in_q->bufs[i].buffer = + &card->qdio.in_q->qdio_bufs[i]; + /* inbound buffer pool */ + if (qeth_alloc_buffer_pool(card)) + goto out_freeinq; + /* outbound */ + card->qdio.out_qs = + kmalloc(card->qdio.no_out_queues * + sizeof(struct qeth_qdio_out_q *), GFP_KERNEL); + if (!card->qdio.out_qs) + goto out_freepool; + for (i = 0; i < card->qdio.no_out_queues; ++i) { + card->qdio.out_qs[i] = kmalloc(sizeof(struct qeth_qdio_out_q), + GFP_KERNEL|GFP_DMA); + if (!card->qdio.out_qs[i]) + goto out_freeoutq; + QETH_DBF_TEXT_(setup, 2, "outq %i", i); + QETH_DBF_HEX(setup, 2, &card->qdio.out_qs[i], sizeof(void *)); + memset(card->qdio.out_qs[i], 0, sizeof(struct qeth_qdio_out_q)); + card->qdio.out_qs[i]->queue_no = i; + /* give outbound qeth_qdio_buffers their qdio_buffers */ + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) { + card->qdio.out_qs[i]->bufs[j].buffer = + &card->qdio.out_qs[i]->qdio_bufs[j]; + skb_queue_head_init(&card->qdio.out_qs[i]->bufs[j]. + skb_list); + lockdep_set_class( + &card->qdio.out_qs[i]->bufs[j].skb_list.lock, + &qdio_out_skb_queue_key); + INIT_LIST_HEAD(&card->qdio.out_qs[i]->bufs[j].ctx_list); + } + } + return 0; + +out_freeoutq: + while (i > 0) + kfree(card->qdio.out_qs[--i]); + kfree(card->qdio.out_qs); + card->qdio.out_qs = NULL; +out_freepool: + qeth_free_buffer_pool(card); +out_freeinq: + kfree(card->qdio.in_q); + card->qdio.in_q = NULL; +out_nomem: + atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED); + return -ENOMEM; +} + +static void qeth_create_qib_param_field(struct qeth_card *card, + char *param_field) +{ + + param_field[0] = _ascebc['P']; + param_field[1] = _ascebc['C']; + param_field[2] = _ascebc['I']; + param_field[3] = _ascebc['T']; + *((unsigned int *) (¶m_field[4])) = QETH_PCI_THRESHOLD_A(card); + *((unsigned int *) (¶m_field[8])) = QETH_PCI_THRESHOLD_B(card); + *((unsigned int *) (¶m_field[12])) = QETH_PCI_TIMER_VALUE(card); +} + +static void qeth_create_qib_param_field_blkt(struct qeth_card *card, + char *param_field) +{ + param_field[16] = _ascebc['B']; + param_field[17] = _ascebc['L']; + param_field[18] = _ascebc['K']; + param_field[19] = _ascebc['T']; + *((unsigned int *) (¶m_field[20])) = card->info.blkt.time_total; + *((unsigned int *) (¶m_field[24])) = card->info.blkt.inter_packet; + *((unsigned int *) (¶m_field[28])) = + card->info.blkt.inter_packet_jumbo; +} + +static int qeth_qdio_activate(struct qeth_card *card) +{ + QETH_DBF_TEXT(setup, 3, "qdioact"); + return qdio_activate(CARD_DDEV(card), 0); +} + +static int qeth_dm_act(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(setup, 2, "dmact"); + + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data, DM_ACT, DM_ACT_SIZE); + + memcpy(QETH_DM_ACT_DEST_ADDR(iob->data), + &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); + memcpy(QETH_DM_ACT_CONNECTION_TOKEN(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); + rc = qeth_send_control_data(card, DM_ACT_SIZE, iob, NULL, NULL); + return rc; +} + +static int qeth_mpc_initialize(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(setup, 2, "mpcinit"); + + rc = qeth_issue_next_read(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return rc; + } + rc = qeth_cm_enable(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + goto out_qdio; + } + rc = qeth_cm_setup(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + goto out_qdio; + } + rc = qeth_ulp_enable(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "4err%d", rc); + goto out_qdio; + } + rc = qeth_ulp_setup(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "5err%d", rc); + goto out_qdio; + } + rc = qeth_alloc_qdio_buffers(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "5err%d", rc); + goto out_qdio; + } + rc = qeth_qdio_establish(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "6err%d", rc); + qeth_free_qdio_buffers(card); + goto out_qdio; + } + rc = qeth_qdio_activate(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "7err%d", rc); + goto out_qdio; + } + rc = qeth_dm_act(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "8err%d", rc); + goto out_qdio; + } + + return 0; +out_qdio: + qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD); + return rc; +} + +static void qeth_print_status_with_portname(struct qeth_card *card) +{ + char dbf_text[15]; + int i; + + sprintf(dbf_text, "%s", card->info.portname + 1); + for (i = 0; i < 8; i++) + dbf_text[i] = + (char) _ebcasc[(__u8) dbf_text[i]]; + dbf_text[8] = 0; + PRINT_INFO("Device %s/%s/%s is a%s card%s%s%s\n" + "with link type %s (portname: %s)\n", + CARD_RDEV_ID(card), + CARD_WDEV_ID(card), + CARD_DDEV_ID(card), + qeth_get_cardname(card), + (card->info.mcl_level[0]) ? " (level: " : "", + (card->info.mcl_level[0]) ? card->info.mcl_level : "", + (card->info.mcl_level[0]) ? ")" : "", + qeth_get_cardname_short(card), + dbf_text); + +} + +static void qeth_print_status_no_portname(struct qeth_card *card) +{ + if (card->info.portname[0]) + PRINT_INFO("Device %s/%s/%s is a%s " + "card%s%s%s\nwith link type %s " + "(no portname needed by interface).\n", + CARD_RDEV_ID(card), + CARD_WDEV_ID(card), + CARD_DDEV_ID(card), + qeth_get_cardname(card), + (card->info.mcl_level[0]) ? " (level: " : "", + (card->info.mcl_level[0]) ? card->info.mcl_level : "", + (card->info.mcl_level[0]) ? ")" : "", + qeth_get_cardname_short(card)); + else + PRINT_INFO("Device %s/%s/%s is a%s " + "card%s%s%s\nwith link type %s.\n", + CARD_RDEV_ID(card), + CARD_WDEV_ID(card), + CARD_DDEV_ID(card), + qeth_get_cardname(card), + (card->info.mcl_level[0]) ? " (level: " : "", + (card->info.mcl_level[0]) ? card->info.mcl_level : "", + (card->info.mcl_level[0]) ? ")" : "", + qeth_get_cardname_short(card)); +} + +void qeth_print_status_message(struct qeth_card *card) +{ + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + /* VM will use a non-zero first character + * to indicate a HiperSockets like reporting + * of the level OSA sets the first character to zero + * */ + if (!card->info.mcl_level[0]) { + sprintf(card->info.mcl_level, "%02x%02x", + card->info.mcl_level[2], + card->info.mcl_level[3]); + + card->info.mcl_level[QETH_MCL_LENGTH] = 0; + break; + } + /* fallthrough */ + case QETH_CARD_TYPE_IQD: + if (card->info.guestlan) { + card->info.mcl_level[0] = (char) _ebcasc[(__u8) + card->info.mcl_level[0]]; + card->info.mcl_level[1] = (char) _ebcasc[(__u8) + card->info.mcl_level[1]]; + card->info.mcl_level[2] = (char) _ebcasc[(__u8) + card->info.mcl_level[2]]; + card->info.mcl_level[3] = (char) _ebcasc[(__u8) + card->info.mcl_level[3]]; + card->info.mcl_level[QETH_MCL_LENGTH] = 0; + } + break; + default: + memset(&card->info.mcl_level[0], 0, QETH_MCL_LENGTH + 1); + } + if (card->info.portname_required) + qeth_print_status_with_portname(card); + else + qeth_print_status_no_portname(card); +} +EXPORT_SYMBOL_GPL(qeth_print_status_message); + +void qeth_put_buffer_pool_entry(struct qeth_card *card, + struct qeth_buffer_pool_entry *entry) +{ + QETH_DBF_TEXT(trace, 6, "ptbfplen"); + list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list); +} +EXPORT_SYMBOL_GPL(qeth_put_buffer_pool_entry); + +static void qeth_initialize_working_pool_list(struct qeth_card *card) +{ + struct qeth_buffer_pool_entry *entry; + + QETH_DBF_TEXT(trace, 5, "inwrklst"); + + list_for_each_entry(entry, + &card->qdio.init_pool.entry_list, init_list) { + qeth_put_buffer_pool_entry(card, entry); + } +} + +static inline struct qeth_buffer_pool_entry *qeth_find_free_buffer_pool_entry( + struct qeth_card *card) +{ + struct list_head *plh; + struct qeth_buffer_pool_entry *entry; + int i, free; + struct page *page; + + if (list_empty(&card->qdio.in_buf_pool.entry_list)) + return NULL; + + list_for_each(plh, &card->qdio.in_buf_pool.entry_list) { + entry = list_entry(plh, struct qeth_buffer_pool_entry, list); + free = 1; + for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) { + if (page_count(virt_to_page(entry->elements[i])) > 1) { + free = 0; + break; + } + } + if (free) { + list_del_init(&entry->list); + return entry; + } + } + + /* no free buffer in pool so take first one and swap pages */ + entry = list_entry(card->qdio.in_buf_pool.entry_list.next, + struct qeth_buffer_pool_entry, list); + for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) { + if (page_count(virt_to_page(entry->elements[i])) > 1) { + page = alloc_page(GFP_ATOMIC|GFP_DMA); + if (!page) { + return NULL; + } else { + free_page((unsigned long)entry->elements[i]); + entry->elements[i] = page_address(page); + if (card->options.performance_stats) + card->perf_stats.sg_alloc_page_rx++; + } + } + } + list_del_init(&entry->list); + return entry; +} + +static int qeth_init_input_buffer(struct qeth_card *card, + struct qeth_qdio_buffer *buf) +{ + struct qeth_buffer_pool_entry *pool_entry; + int i; + + pool_entry = qeth_find_free_buffer_pool_entry(card); + if (!pool_entry) + return 1; + + /* + * since the buffer is accessed only from the input_tasklet + * there shouldn't be a need to synchronize; also, since we use + * the QETH_IN_BUF_REQUEUE_THRESHOLD we should never run out off + * buffers + */ + BUG_ON(!pool_entry); + + buf->pool_entry = pool_entry; + for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) { + buf->buffer->element[i].length = PAGE_SIZE; + buf->buffer->element[i].addr = pool_entry->elements[i]; + if (i == QETH_MAX_BUFFER_ELEMENTS(card) - 1) + buf->buffer->element[i].flags = SBAL_FLAGS_LAST_ENTRY; + else + buf->buffer->element[i].flags = 0; + } + return 0; +} + +int qeth_init_qdio_queues(struct qeth_card *card) +{ + int i, j; + int rc; + + QETH_DBF_TEXT(setup, 2, "initqdqs"); + + /* inbound queue */ + memset(card->qdio.in_q->qdio_bufs, 0, + QDIO_MAX_BUFFERS_PER_Q * sizeof(struct qdio_buffer)); + qeth_initialize_working_pool_list(card); + /*give only as many buffers to hardware as we have buffer pool entries*/ + for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; ++i) + qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]); + card->qdio.in_q->next_buf_to_init = + card->qdio.in_buf_pool.buf_count - 1; + rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, 0, + card->qdio.in_buf_pool.buf_count - 1, NULL); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return rc; + } + rc = qdio_synchronize(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + return rc; + } + /* outbound queue */ + for (i = 0; i < card->qdio.no_out_queues; ++i) { + memset(card->qdio.out_qs[i]->qdio_bufs, 0, + QDIO_MAX_BUFFERS_PER_Q * sizeof(struct qdio_buffer)); + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) { + qeth_clear_output_buffer(card->qdio.out_qs[i], + &card->qdio.out_qs[i]->bufs[j]); + } + card->qdio.out_qs[i]->card = card; + card->qdio.out_qs[i]->next_buf_to_fill = 0; + card->qdio.out_qs[i]->do_pack = 0; + atomic_set(&card->qdio.out_qs[i]->used_buffers, 0); + atomic_set(&card->qdio.out_qs[i]->set_pci_flags_count, 0); + atomic_set(&card->qdio.out_qs[i]->state, + QETH_OUT_Q_UNLOCKED); + } + return 0; +} +EXPORT_SYMBOL_GPL(qeth_init_qdio_queues); + +static inline __u8 qeth_get_ipa_adp_type(enum qeth_link_types link_type) +{ + switch (link_type) { + case QETH_LINK_TYPE_HSTR: + return 2; + default: + return 1; + } +} + +static void qeth_fill_ipacmd_header(struct qeth_card *card, + struct qeth_ipa_cmd *cmd, __u8 command, + enum qeth_prot_versions prot) +{ + memset(cmd, 0, sizeof(struct qeth_ipa_cmd)); + cmd->hdr.command = command; + cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST; + cmd->hdr.seqno = card->seqno.ipa; + cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type); + cmd->hdr.rel_adapter_no = (__u8) card->info.portno; + if (card->options.layer2) + cmd->hdr.prim_version_no = 2; + else + cmd->hdr.prim_version_no = 1; + cmd->hdr.param_count = 1; + cmd->hdr.prot_version = prot; + cmd->hdr.ipa_supported = 0; + cmd->hdr.ipa_enabled = 0; +} + +struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *card, + enum qeth_ipa_cmds ipacmd, enum qeth_prot_versions prot) +{ + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + iob = qeth_wait_for_buffer(&card->write); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + qeth_fill_ipacmd_header(card, cmd, ipacmd, prot); + + return iob; +} +EXPORT_SYMBOL_GPL(qeth_get_ipacmd_buffer); + +void qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + char prot_type) +{ + memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); + memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data), &prot_type, 1); + memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); +} +EXPORT_SYMBOL_GPL(qeth_prepare_ipa_cmd); + +int qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + int (*reply_cb)(struct qeth_card *, struct qeth_reply*, + unsigned long), + void *reply_param) +{ + int rc; + char prot_type; + int cmd; + cmd = ((struct qeth_ipa_cmd *) + (iob->data+IPA_PDU_HEADER_SIZE))->hdr.command; + + QETH_DBF_TEXT(trace, 4, "sendipa"); + + if (card->options.layer2) + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; + else + prot_type = QETH_PROT_TCPIP; + qeth_prepare_ipa_cmd(card, iob, prot_type); + rc = qeth_send_control_data(card, IPA_CMD_LENGTH, iob, + reply_cb, reply_param); + if (rc != 0) { + char *ipa_cmd_name; + ipa_cmd_name = qeth_get_ipa_cmd_name(cmd); + PRINT_ERR("%s %s(%x) returned %s(%x)\n", __FUNCTION__, + ipa_cmd_name, cmd, qeth_get_ipa_msg(rc), rc); + } + return rc; +} +EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); + +static int qeth_send_startstoplan(struct qeth_card *card, + enum qeth_ipa_cmds ipacmd, enum qeth_prot_versions prot) +{ + int rc; + struct qeth_cmd_buffer *iob; + + iob = qeth_get_ipacmd_buffer(card, ipacmd, prot); + rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); + + return rc; +} + +int qeth_send_startlan(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(setup, 2, "strtlan"); + + rc = qeth_send_startstoplan(card, IPA_CMD_STARTLAN, 0); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_send_startlan); + +int qeth_send_stoplan(struct qeth_card *card) +{ + int rc = 0; + + /* + * TODO: according to the IPA format document page 14, + * TCP/IP (we!) never issue a STOPLAN + * is this right ?!? + */ + QETH_DBF_TEXT(setup, 2, "stoplan"); + + rc = qeth_send_startstoplan(card, IPA_CMD_STOPLAN, 0); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_send_stoplan); + +int qeth_default_setadapterparms_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "defadpcb"); + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code == 0) + cmd->hdr.return_code = + cmd->data.setadapterparms.hdr.return_code; + return 0; +} +EXPORT_SYMBOL_GPL(qeth_default_setadapterparms_cb); + +static int qeth_query_setadapterparms_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 3, "quyadpcb"); + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->data.setadapterparms.data.query_cmds_supp.lan_type & 0x7f) + card->info.link_type = + cmd->data.setadapterparms.data.query_cmds_supp.lan_type; + card->options.adp.supported_funcs = + cmd->data.setadapterparms.data.query_cmds_supp.supported_cmds; + return qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd); +} + +struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *card, + __u32 command, __u32 cmdlen) +{ + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SETADAPTERPARMS, + QETH_PROT_IPV4); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setadapterparms.hdr.cmdlength = cmdlen; + cmd->data.setadapterparms.hdr.command_code = command; + cmd->data.setadapterparms.hdr.used_total = 1; + cmd->data.setadapterparms.hdr.seq_no = 1; + + return iob; +} +EXPORT_SYMBOL_GPL(qeth_get_adapter_cmd); + +int qeth_query_setadapterparms(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 3, "queryadp"); + iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_COMMANDS_SUPPORTED, + sizeof(struct qeth_ipacmd_setadpparms)); + rc = qeth_send_ipa_cmd(card, iob, qeth_query_setadapterparms_cb, NULL); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_query_setadapterparms); + +int qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error, + unsigned int siga_error, const char *dbftext) +{ + if (qdio_error || siga_error) { + QETH_DBF_TEXT(trace, 2, dbftext); + QETH_DBF_TEXT(qerr, 2, dbftext); + QETH_DBF_TEXT_(qerr, 2, " F15=%02X", + buf->element[15].flags & 0xff); + QETH_DBF_TEXT_(qerr, 2, " F14=%02X", + buf->element[14].flags & 0xff); + QETH_DBF_TEXT_(qerr, 2, " qerr=%X", qdio_error); + QETH_DBF_TEXT_(qerr, 2, " serr=%X", siga_error); + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(qeth_check_qdio_errors); + +void qeth_queue_input_buffer(struct qeth_card *card, int index) +{ + struct qeth_qdio_q *queue = card->qdio.in_q; + int count; + int i; + int rc; + int newcount = 0; + + QETH_DBF_TEXT(trace, 6, "queinbuf"); + count = (index < queue->next_buf_to_init)? + card->qdio.in_buf_pool.buf_count - + (queue->next_buf_to_init - index) : + card->qdio.in_buf_pool.buf_count - + (queue->next_buf_to_init + QDIO_MAX_BUFFERS_PER_Q - index); + /* only requeue at a certain threshold to avoid SIGAs */ + if (count >= QETH_IN_BUF_REQUEUE_THRESHOLD(card)) { + for (i = queue->next_buf_to_init; + i < queue->next_buf_to_init + count; ++i) { + if (qeth_init_input_buffer(card, + &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q])) { + break; + } else { + newcount++; + } + } + + if (newcount < count) { + /* we are in memory shortage so we switch back to + traditional skb allocation and drop packages */ + if (!atomic_read(&card->force_alloc_skb) && + net_ratelimit()) + PRINT_WARN("Switch to alloc skb\n"); + atomic_set(&card->force_alloc_skb, 3); + count = newcount; + } else { + if ((atomic_read(&card->force_alloc_skb) == 1) && + net_ratelimit()) + PRINT_WARN("Switch to sg\n"); + atomic_add_unless(&card->force_alloc_skb, -1, 0); + } + + /* + * according to old code it should be avoided to requeue all + * 128 buffers in order to benefit from PCI avoidance. + * this function keeps at least one buffer (the buffer at + * 'index') un-requeued -> this buffer is the first buffer that + * will be requeued the next time + */ + if (card->options.performance_stats) { + card->perf_stats.inbound_do_qdio_cnt++; + card->perf_stats.inbound_do_qdio_start_time = + qeth_get_micros(); + } + rc = do_QDIO(CARD_DDEV(card), + QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT, + 0, queue->next_buf_to_init, count, NULL); + if (card->options.performance_stats) + card->perf_stats.inbound_do_qdio_time += + qeth_get_micros() - + card->perf_stats.inbound_do_qdio_start_time; + if (rc) { + PRINT_WARN("qeth_queue_input_buffer's do_QDIO " + "return %i (device %s).\n", + rc, CARD_DDEV_ID(card)); + QETH_DBF_TEXT(trace, 2, "qinberr"); + QETH_DBF_TEXT_(trace, 2, "%s", CARD_BUS_ID(card)); + } + queue->next_buf_to_init = (queue->next_buf_to_init + count) % + QDIO_MAX_BUFFERS_PER_Q; + } +} +EXPORT_SYMBOL_GPL(qeth_queue_input_buffer); + +static int qeth_handle_send_error(struct qeth_card *card, + struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err, + unsigned int siga_err) +{ + int sbalf15 = buffer->buffer->element[15].flags & 0xff; + int cc = siga_err & 3; + + QETH_DBF_TEXT(trace, 6, "hdsnderr"); + qeth_check_qdio_errors(buffer->buffer, qdio_err, siga_err, "qouterr"); + switch (cc) { + case 0: + if (qdio_err) { + QETH_DBF_TEXT(trace, 1, "lnkfail"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(trace, 1, "%04x %02x", + (u16)qdio_err, (u8)sbalf15); + return QETH_SEND_ERROR_LINK_FAILURE; + } + return QETH_SEND_ERROR_NONE; + case 2: + if (siga_err & QDIO_SIGA_ERROR_B_BIT_SET) { + QETH_DBF_TEXT(trace, 1, "SIGAcc2B"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + return QETH_SEND_ERROR_KICK_IT; + } + if ((sbalf15 >= 15) && (sbalf15 <= 31)) + return QETH_SEND_ERROR_RETRY; + return QETH_SEND_ERROR_LINK_FAILURE; + /* look at qdio_error and sbalf 15 */ + case 1: + QETH_DBF_TEXT(trace, 1, "SIGAcc1"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + return QETH_SEND_ERROR_LINK_FAILURE; + case 3: + default: + QETH_DBF_TEXT(trace, 1, "SIGAcc3"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + return QETH_SEND_ERROR_KICK_IT; + } +} + +/* + * Switched to packing state if the number of used buffers on a queue + * reaches a certain limit. + */ +static void qeth_switch_to_packing_if_needed(struct qeth_qdio_out_q *queue) +{ + if (!queue->do_pack) { + if (atomic_read(&queue->used_buffers) + >= QETH_HIGH_WATERMARK_PACK){ + /* switch non-PACKING -> PACKING */ + QETH_DBF_TEXT(trace, 6, "np->pack"); + if (queue->card->options.performance_stats) + queue->card->perf_stats.sc_dp_p++; + queue->do_pack = 1; + } + } +} + +/* + * Switches from packing to non-packing mode. If there is a packing + * buffer on the queue this buffer will be prepared to be flushed. + * In that case 1 is returned to inform the caller. If no buffer + * has to be flushed, zero is returned. + */ +static int qeth_switch_to_nonpacking_if_needed(struct qeth_qdio_out_q *queue) +{ + struct qeth_qdio_out_buffer *buffer; + int flush_count = 0; + + if (queue->do_pack) { + if (atomic_read(&queue->used_buffers) + <= QETH_LOW_WATERMARK_PACK) { + /* switch PACKING -> non-PACKING */ + QETH_DBF_TEXT(trace, 6, "pack->np"); + if (queue->card->options.performance_stats) + queue->card->perf_stats.sc_p_dp++; + queue->do_pack = 0; + /* flush packing buffers */ + buffer = &queue->bufs[queue->next_buf_to_fill]; + if ((atomic_read(&buffer->state) == + QETH_QDIO_BUF_EMPTY) && + (buffer->next_element_to_fill > 0)) { + atomic_set(&buffer->state, + QETH_QDIO_BUF_PRIMED); + flush_count++; + queue->next_buf_to_fill = + (queue->next_buf_to_fill + 1) % + QDIO_MAX_BUFFERS_PER_Q; + } + } + } + return flush_count; +} + +/* + * Called to flush a packing buffer if no more pci flags are on the queue. + * Checks if there is a packing buffer and prepares it to be flushed. + * In that case returns 1, otherwise zero. + */ +static int qeth_flush_buffers_on_no_pci(struct qeth_qdio_out_q *queue) +{ + struct qeth_qdio_out_buffer *buffer; + + buffer = &queue->bufs[queue->next_buf_to_fill]; + if ((atomic_read(&buffer->state) == QETH_QDIO_BUF_EMPTY) && + (buffer->next_element_to_fill > 0)) { + /* it's a packing buffer */ + atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED); + queue->next_buf_to_fill = + (queue->next_buf_to_fill + 1) % QDIO_MAX_BUFFERS_PER_Q; + return 1; + } + return 0; +} + +static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, + int index, int count) +{ + struct qeth_qdio_out_buffer *buf; + int rc; + int i; + unsigned int qdio_flags; + + QETH_DBF_TEXT(trace, 6, "flushbuf"); + + for (i = index; i < index + count; ++i) { + buf = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; + buf->buffer->element[buf->next_element_to_fill - 1].flags |= + SBAL_FLAGS_LAST_ENTRY; + + if (queue->card->info.type == QETH_CARD_TYPE_IQD) + continue; + + if (!queue->do_pack) { + if ((atomic_read(&queue->used_buffers) >= + (QETH_HIGH_WATERMARK_PACK - + QETH_WATERMARK_PACK_FUZZ)) && + !atomic_read(&queue->set_pci_flags_count)) { + /* it's likely that we'll go to packing + * mode soon */ + atomic_inc(&queue->set_pci_flags_count); + buf->buffer->element[0].flags |= 0x40; + } + } else { + if (!atomic_read(&queue->set_pci_flags_count)) { + /* + * there's no outstanding PCI any more, so we + * have to request a PCI to be sure the the PCI + * will wake at some time in the future then we + * can flush packed buffers that might still be + * hanging around, which can happen if no + * further send was requested by the stack + */ + atomic_inc(&queue->set_pci_flags_count); + buf->buffer->element[0].flags |= 0x40; + } + } + } + + queue->card->dev->trans_start = jiffies; + if (queue->card->options.performance_stats) { + queue->card->perf_stats.outbound_do_qdio_cnt++; + queue->card->perf_stats.outbound_do_qdio_start_time = + qeth_get_micros(); + } + qdio_flags = QDIO_FLAG_SYNC_OUTPUT; + if (under_int) + qdio_flags |= QDIO_FLAG_UNDER_INTERRUPT; + if (atomic_read(&queue->set_pci_flags_count)) + qdio_flags |= QDIO_FLAG_PCI_OUT; + rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, + queue->queue_no, index, count, NULL); + if (queue->card->options.performance_stats) + queue->card->perf_stats.outbound_do_qdio_time += + qeth_get_micros() - + queue->card->perf_stats.outbound_do_qdio_start_time; + if (rc) { + QETH_DBF_TEXT(trace, 2, "flushbuf"); + QETH_DBF_TEXT_(trace, 2, " err%d", rc); + QETH_DBF_TEXT_(trace, 2, "%s", CARD_DDEV_ID(queue->card)); + queue->card->stats.tx_errors += count; + /* this must not happen under normal circumstances. if it + * happens something is really wrong -> recover */ + qeth_schedule_recovery(queue->card); + return; + } + atomic_add(count, &queue->used_buffers); + if (queue->card->options.performance_stats) + queue->card->perf_stats.bufs_sent += count; +} + +static void qeth_check_outbound_queue(struct qeth_qdio_out_q *queue) +{ + int index; + int flush_cnt = 0; + int q_was_packing = 0; + + /* + * check if weed have to switch to non-packing mode or if + * we have to get a pci flag out on the queue + */ + if ((atomic_read(&queue->used_buffers) <= QETH_LOW_WATERMARK_PACK) || + !atomic_read(&queue->set_pci_flags_count)) { + if (atomic_xchg(&queue->state, QETH_OUT_Q_LOCKED_FLUSH) == + QETH_OUT_Q_UNLOCKED) { + /* + * If we get in here, there was no action in + * do_send_packet. So, we check if there is a + * packing buffer to be flushed here. + */ + netif_stop_queue(queue->card->dev); + index = queue->next_buf_to_fill; + q_was_packing = queue->do_pack; + /* queue->do_pack may change */ + barrier(); + flush_cnt += qeth_switch_to_nonpacking_if_needed(queue); + if (!flush_cnt && + !atomic_read(&queue->set_pci_flags_count)) + flush_cnt += + qeth_flush_buffers_on_no_pci(queue); + if (queue->card->options.performance_stats && + q_was_packing) + queue->card->perf_stats.bufs_sent_pack += + flush_cnt; + if (flush_cnt) + qeth_flush_buffers(queue, 1, index, flush_cnt); + atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); + } + } +} + +void qeth_qdio_output_handler(struct ccw_device *ccwdev, unsigned int status, + unsigned int qdio_error, unsigned int siga_error, + unsigned int __queue, int first_element, int count, + unsigned long card_ptr) +{ + struct qeth_card *card = (struct qeth_card *) card_ptr; + struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue]; + struct qeth_qdio_out_buffer *buffer; + int i; + + QETH_DBF_TEXT(trace, 6, "qdouhdl"); + if (status & QDIO_STATUS_LOOK_FOR_ERROR) { + if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(trace, 2, "achkcond"); + QETH_DBF_TEXT_(trace, 2, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(trace, 2, "%08x", status); + netif_stop_queue(card->dev); + qeth_schedule_recovery(card); + return; + } + } + if (card->options.performance_stats) { + card->perf_stats.outbound_handler_cnt++; + card->perf_stats.outbound_handler_start_time = + qeth_get_micros(); + } + for (i = first_element; i < (first_element + count); ++i) { + buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; + /*we only handle the KICK_IT error by doing a recovery */ + if (qeth_handle_send_error(card, buffer, + qdio_error, siga_error) + == QETH_SEND_ERROR_KICK_IT){ + netif_stop_queue(card->dev); + qeth_schedule_recovery(card); + return; + } + qeth_clear_output_buffer(queue, buffer); + } + atomic_sub(count, &queue->used_buffers); + /* check if we need to do something on this outbound queue */ + if (card->info.type != QETH_CARD_TYPE_IQD) + qeth_check_outbound_queue(queue); + + netif_wake_queue(queue->card->dev); + if (card->options.performance_stats) + card->perf_stats.outbound_handler_time += qeth_get_micros() - + card->perf_stats.outbound_handler_start_time; +} +EXPORT_SYMBOL_GPL(qeth_qdio_output_handler); + +int qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb) +{ + int cast_type = RTN_UNSPEC; + + if (card->info.type == QETH_CARD_TYPE_OSN) + return cast_type; + + if (skb->dst && skb->dst->neighbour) { + cast_type = skb->dst->neighbour->type; + if ((cast_type == RTN_BROADCAST) || + (cast_type == RTN_MULTICAST) || + (cast_type == RTN_ANYCAST)) + return cast_type; + else + return RTN_UNSPEC; + } + /* try something else */ + if (skb->protocol == ETH_P_IPV6) + return (skb_network_header(skb)[24] == 0xff) ? + RTN_MULTICAST : 0; + else if (skb->protocol == ETH_P_IP) + return ((skb_network_header(skb)[16] & 0xf0) == 0xe0) ? + RTN_MULTICAST : 0; + /* ... */ + if (!memcmp(skb->data, skb->dev->broadcast, 6)) + return RTN_BROADCAST; + else { + u16 hdr_mac; + + hdr_mac = *((u16 *)skb->data); + /* tr multicast? */ + switch (card->info.link_type) { + case QETH_LINK_TYPE_HSTR: + case QETH_LINK_TYPE_LANE_TR: + if ((hdr_mac == QETH_TR_MAC_NC) || + (hdr_mac == QETH_TR_MAC_C)) + return RTN_MULTICAST; + break; + /* eth or so multicast? */ + default: + if ((hdr_mac == QETH_ETH_MAC_V4) || + (hdr_mac == QETH_ETH_MAC_V6)) + return RTN_MULTICAST; + } + } + return cast_type; +} +EXPORT_SYMBOL_GPL(qeth_get_cast_type); + +int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb, + int ipv, int cast_type) +{ + if (!ipv && (card->info.type == QETH_CARD_TYPE_OSAE)) + return card->qdio.default_out_queue; + switch (card->qdio.no_out_queues) { + case 4: + if (cast_type && card->info.is_multicast_different) + return card->info.is_multicast_different & + (card->qdio.no_out_queues - 1); + if (card->qdio.do_prio_queueing && (ipv == 4)) { + const u8 tos = ip_hdr(skb)->tos; + + if (card->qdio.do_prio_queueing == + QETH_PRIO_Q_ING_TOS) { + if (tos & IP_TOS_NOTIMPORTANT) + return 3; + if (tos & IP_TOS_HIGHRELIABILITY) + return 2; + if (tos & IP_TOS_HIGHTHROUGHPUT) + return 1; + if (tos & IP_TOS_LOWDELAY) + return 0; + } + if (card->qdio.do_prio_queueing == + QETH_PRIO_Q_ING_PREC) + return 3 - (tos >> 6); + } else if (card->qdio.do_prio_queueing && (ipv == 6)) { + /* TODO: IPv6!!! */ + } + return card->qdio.default_out_queue; + case 1: /* fallthrough for single-out-queue 1920-device */ + default: + return card->qdio.default_out_queue; + } +} +EXPORT_SYMBOL_GPL(qeth_get_priority_queue); + +static void __qeth_free_new_skb(struct sk_buff *orig_skb, + struct sk_buff *new_skb) +{ + if (orig_skb != new_skb) + dev_kfree_skb_any(new_skb); +} + +static inline struct sk_buff *qeth_realloc_headroom(struct qeth_card *card, + struct sk_buff *skb, int size) +{ + struct sk_buff *new_skb = skb; + + if (skb_headroom(skb) >= size) + return skb; + new_skb = skb_realloc_headroom(skb, size); + if (!new_skb) + PRINT_ERR("Could not realloc headroom for qeth_hdr " + "on interface %s", QETH_CARD_IFNAME(card)); + return new_skb; +} + +struct sk_buff *qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb, + struct qeth_hdr **hdr) +{ + struct sk_buff *new_skb; + + QETH_DBF_TEXT(trace, 6, "prepskb"); + + new_skb = qeth_realloc_headroom(card, skb, + sizeof(struct qeth_hdr)); + if (!new_skb) + return NULL; + + *hdr = ((struct qeth_hdr *)qeth_push_skb(card, new_skb, + sizeof(struct qeth_hdr))); + if (*hdr == NULL) { + __qeth_free_new_skb(skb, new_skb); + return NULL; + } + return new_skb; +} +EXPORT_SYMBOL_GPL(qeth_prepare_skb); + +int qeth_get_elements_no(struct qeth_card *card, void *hdr, + struct sk_buff *skb, int elems) +{ + int elements_needed = 0; + + if (skb_shinfo(skb)->nr_frags > 0) + elements_needed = (skb_shinfo(skb)->nr_frags + 1); + if (elements_needed == 0) + elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) + + skb->len) >> PAGE_SHIFT); + if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { + PRINT_ERR("Invalid size of IP packet " + "(Number=%d / Length=%d). Discarded.\n", + (elements_needed+elems), skb->len); + return 0; + } + return elements_needed; +} +EXPORT_SYMBOL_GPL(qeth_get_elements_no); + +static void __qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, + int is_tso, int *next_element_to_fill) +{ + int length = skb->len; + int length_here; + int element; + char *data; + int first_lap ; + + element = *next_element_to_fill; + data = skb->data; + first_lap = (is_tso == 0 ? 1 : 0); + + while (length > 0) { + /* length_here is the remaining amount of data in this page */ + length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); + if (length < length_here) + length_here = length; + + buffer->element[element].addr = data; + buffer->element[element].length = length_here; + length -= length_here; + if (!length) { + if (first_lap) + buffer->element[element].flags = 0; + else + buffer->element[element].flags = + SBAL_FLAGS_LAST_FRAG; + } else { + if (first_lap) + buffer->element[element].flags = + SBAL_FLAGS_FIRST_FRAG; + else + buffer->element[element].flags = + SBAL_FLAGS_MIDDLE_FRAG; + } + data += length_here; + element++; + first_lap = 0; + } + *next_element_to_fill = element; +} + +static int qeth_fill_buffer(struct qeth_qdio_out_q *queue, + struct qeth_qdio_out_buffer *buf, struct sk_buff *skb) +{ + struct qdio_buffer *buffer; + struct qeth_hdr_tso *hdr; + int flush_cnt = 0, hdr_len, large_send = 0; + + QETH_DBF_TEXT(trace, 6, "qdfillbf"); + + buffer = buf->buffer; + atomic_inc(&skb->users); + skb_queue_tail(&buf->skb_list, skb); + + hdr = (struct qeth_hdr_tso *) skb->data; + /*check first on TSO ....*/ + if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { + int element = buf->next_element_to_fill; + + hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; + /*fill first buffer entry only with header information */ + buffer->element[element].addr = skb->data; + buffer->element[element].length = hdr_len; + buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buf->next_element_to_fill++; + skb->data += hdr_len; + skb->len -= hdr_len; + large_send = 1; + } + if (skb_shinfo(skb)->nr_frags == 0) + __qeth_fill_buffer(skb, buffer, large_send, + (int *)&buf->next_element_to_fill); + else + __qeth_fill_buffer_frag(skb, buffer, large_send, + (int *)&buf->next_element_to_fill); + + if (!queue->do_pack) { + QETH_DBF_TEXT(trace, 6, "fillbfnp"); + /* set state to PRIMED -> will be flushed */ + atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); + flush_cnt = 1; + } else { + QETH_DBF_TEXT(trace, 6, "fillbfpa"); + if (queue->card->options.performance_stats) + queue->card->perf_stats.skbs_sent_pack++; + if (buf->next_element_to_fill >= + QETH_MAX_BUFFER_ELEMENTS(queue->card)) { + /* + * packed buffer if full -> set state PRIMED + * -> will be flushed + */ + atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); + flush_cnt = 1; + } + } + return flush_cnt; +} + +int qeth_do_send_packet_fast(struct qeth_card *card, + struct qeth_qdio_out_q *queue, struct sk_buff *skb, + struct qeth_hdr *hdr, int elements_needed, + struct qeth_eddp_context *ctx) +{ + struct qeth_qdio_out_buffer *buffer; + int buffers_needed = 0; + int flush_cnt = 0; + int index; + + QETH_DBF_TEXT(trace, 6, "dosndpfa"); + + /* spin until we get the queue ... */ + while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED, + QETH_OUT_Q_LOCKED) != QETH_OUT_Q_UNLOCKED); + /* ... now we've got the queue */ + index = queue->next_buf_to_fill; + buffer = &queue->bufs[queue->next_buf_to_fill]; + /* + * check if buffer is empty to make sure that we do not 'overtake' + * ourselves and try to fill a buffer that is already primed + */ + if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) + goto out; + if (ctx == NULL) + queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) % + QDIO_MAX_BUFFERS_PER_Q; + else { + buffers_needed = qeth_eddp_check_buffers_for_context(queue, + ctx); + if (buffers_needed < 0) + goto out; + queue->next_buf_to_fill = + (queue->next_buf_to_fill + buffers_needed) % + QDIO_MAX_BUFFERS_PER_Q; + } + atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); + if (ctx == NULL) { + qeth_fill_buffer(queue, buffer, skb); + qeth_flush_buffers(queue, 0, index, 1); + } else { + flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); + WARN_ON(buffers_needed != flush_cnt); + qeth_flush_buffers(queue, 0, index, flush_cnt); + } + return 0; +out: + atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(qeth_do_send_packet_fast); + +int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, + struct sk_buff *skb, struct qeth_hdr *hdr, + int elements_needed, struct qeth_eddp_context *ctx) +{ + struct qeth_qdio_out_buffer *buffer; + int start_index; + int flush_count = 0; + int do_pack = 0; + int tmp; + int rc = 0; + + QETH_DBF_TEXT(trace, 6, "dosndpkt"); + + /* spin until we get the queue ... */ + while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED, + QETH_OUT_Q_LOCKED) != QETH_OUT_Q_UNLOCKED); + start_index = queue->next_buf_to_fill; + buffer = &queue->bufs[queue->next_buf_to_fill]; + /* + * check if buffer is empty to make sure that we do not 'overtake' + * ourselves and try to fill a buffer that is already primed + */ + if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) { + atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); + return -EBUSY; + } + /* check if we need to switch packing state of this queue */ + qeth_switch_to_packing_if_needed(queue); + if (queue->do_pack) { + do_pack = 1; + if (ctx == NULL) { + /* does packet fit in current buffer? */ + if ((QETH_MAX_BUFFER_ELEMENTS(card) - + buffer->next_element_to_fill) < elements_needed) { + /* ... no -> set state PRIMED */ + atomic_set(&buffer->state, + QETH_QDIO_BUF_PRIMED); + flush_count++; + queue->next_buf_to_fill = + (queue->next_buf_to_fill + 1) % + QDIO_MAX_BUFFERS_PER_Q; + buffer = &queue->bufs[queue->next_buf_to_fill]; + /* we did a step forward, so check buffer state + * again */ + if (atomic_read(&buffer->state) != + QETH_QDIO_BUF_EMPTY){ + qeth_flush_buffers(queue, 0, + start_index, flush_count); + atomic_set(&queue->state, + QETH_OUT_Q_UNLOCKED); + return -EBUSY; + } + } + } else { + /* check if we have enough elements (including following + * free buffers) to handle eddp context */ + if (qeth_eddp_check_buffers_for_context(queue, ctx) + < 0) { + if (net_ratelimit()) + PRINT_WARN("eddp tx_dropped 1\n"); + rc = -EBUSY; + goto out; + } + } + } + if (ctx == NULL) + tmp = qeth_fill_buffer(queue, buffer, skb); + else { + tmp = qeth_eddp_fill_buffer(queue, ctx, + queue->next_buf_to_fill); + if (tmp < 0) { + PRINT_ERR("eddp tx_dropped 2\n"); + rc = -EBUSY; + goto out; + } + } + queue->next_buf_to_fill = (queue->next_buf_to_fill + tmp) % + QDIO_MAX_BUFFERS_PER_Q; + flush_count += tmp; +out: + if (flush_count) + qeth_flush_buffers(queue, 0, start_index, flush_count); + else if (!atomic_read(&queue->set_pci_flags_count)) + atomic_xchg(&queue->state, QETH_OUT_Q_LOCKED_FLUSH); + /* + * queue->state will go from LOCKED -> UNLOCKED or from + * LOCKED_FLUSH -> LOCKED if output_handler wanted to 'notify' us + * (switch packing state or flush buffer to get another pci flag out). + * In that case we will enter this loop + */ + while (atomic_dec_return(&queue->state)) { + flush_count = 0; + start_index = queue->next_buf_to_fill; + /* check if we can go back to non-packing state */ + flush_count += qeth_switch_to_nonpacking_if_needed(queue); + /* + * check if we need to flush a packing buffer to get a pci + * flag out on the queue + */ + if (!flush_count && !atomic_read(&queue->set_pci_flags_count)) + flush_count += qeth_flush_buffers_on_no_pci(queue); + if (flush_count) + qeth_flush_buffers(queue, 0, start_index, flush_count); + } + /* at this point the queue is UNLOCKED again */ + if (queue->card->options.performance_stats && do_pack) + queue->card->perf_stats.bufs_sent_pack += flush_count; + + return rc; +} +EXPORT_SYMBOL_GPL(qeth_do_send_packet); + +static int qeth_setadp_promisc_mode_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + struct qeth_ipacmd_setadpparms *setparms; + + QETH_DBF_TEXT(trace, 4, "prmadpcb"); + + cmd = (struct qeth_ipa_cmd *) data; + setparms = &(cmd->data.setadapterparms); + + qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd); + if (cmd->hdr.return_code) { + QETH_DBF_TEXT_(trace, 4, "prmrc%2.2x", cmd->hdr.return_code); + setparms->data.mode = SET_PROMISC_MODE_OFF; + } + card->info.promisc_mode = setparms->data.mode; + return 0; +} + +void qeth_setadp_promisc_mode(struct qeth_card *card) +{ + enum qeth_ipa_promisc_modes mode; + struct net_device *dev = card->dev; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "setprom"); + + if (((dev->flags & IFF_PROMISC) && + (card->info.promisc_mode == SET_PROMISC_MODE_ON)) || + (!(dev->flags & IFF_PROMISC) && + (card->info.promisc_mode == SET_PROMISC_MODE_OFF))) + return; + mode = SET_PROMISC_MODE_OFF; + if (dev->flags & IFF_PROMISC) + mode = SET_PROMISC_MODE_ON; + QETH_DBF_TEXT_(trace, 4, "mode:%x", mode); + + iob = qeth_get_adapter_cmd(card, IPA_SETADP_SET_PROMISC_MODE, + sizeof(struct qeth_ipacmd_setadpparms)); + cmd = (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE); + cmd->data.setadapterparms.data.mode = mode; + qeth_send_ipa_cmd(card, iob, qeth_setadp_promisc_mode_cb, NULL); +} +EXPORT_SYMBOL_GPL(qeth_setadp_promisc_mode); + +int qeth_change_mtu(struct net_device *dev, int new_mtu) +{ + struct qeth_card *card; + char dbf_text[15]; + + card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 4, "chgmtu"); + sprintf(dbf_text, "%8x", new_mtu); + QETH_DBF_TEXT(trace, 4, dbf_text); + + if (new_mtu < 64) + return -EINVAL; + if (new_mtu > 65535) + return -EINVAL; + if ((!qeth_is_supported(card, IPA_IP_FRAGMENTATION)) && + (!qeth_mtu_is_valid(card, new_mtu))) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} +EXPORT_SYMBOL_GPL(qeth_change_mtu); + +struct net_device_stats *qeth_get_stats(struct net_device *dev) +{ + struct qeth_card *card; + + card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 5, "getstat"); + + return &card->stats; +} +EXPORT_SYMBOL_GPL(qeth_get_stats); + +static int qeth_setadpparms_change_macaddr_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "chgmaccb"); + + cmd = (struct qeth_ipa_cmd *) data; + if (!card->options.layer2 || + !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) { + memcpy(card->dev->dev_addr, + &cmd->data.setadapterparms.data.change_addr.addr, + OSA_ADDR_LEN); + card->info.mac_bits |= QETH_LAYER2_MAC_READ; + } + qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd); + return 0; +} + +int qeth_setadpparms_change_macaddr(struct qeth_card *card) +{ + int rc; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "chgmac"); + + iob = qeth_get_adapter_cmd(card, IPA_SETADP_ALTER_MAC_ADDRESS, + sizeof(struct qeth_ipacmd_setadpparms)); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setadapterparms.data.change_addr.cmd = CHANGE_ADDR_READ_MAC; + cmd->data.setadapterparms.data.change_addr.addr_size = OSA_ADDR_LEN; + memcpy(&cmd->data.setadapterparms.data.change_addr.addr, + card->dev->dev_addr, OSA_ADDR_LEN); + rc = qeth_send_ipa_cmd(card, iob, qeth_setadpparms_change_macaddr_cb, + NULL); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_setadpparms_change_macaddr); + +void qeth_tx_timeout(struct net_device *dev) +{ + struct qeth_card *card; + + card = netdev_priv(dev); + card->stats.tx_errors++; + qeth_schedule_recovery(card); +} +EXPORT_SYMBOL_GPL(qeth_tx_timeout); + +int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) +{ + struct qeth_card *card = netdev_priv(dev); + int rc = 0; + + switch (regnum) { + case MII_BMCR: /* Basic mode control register */ + rc = BMCR_FULLDPLX; + if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH) && + (card->info.link_type != QETH_LINK_TYPE_OSN) && + (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) + rc |= BMCR_SPEED100; + break; + case MII_BMSR: /* Basic mode status register */ + rc = BMSR_ERCAP | BMSR_ANEGCOMPLETE | BMSR_LSTATUS | + BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | BMSR_100FULL | + BMSR_100BASE4; + break; + case MII_PHYSID1: /* PHYS ID 1 */ + rc = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 8) | + dev->dev_addr[2]; + rc = (rc >> 5) & 0xFFFF; + break; + case MII_PHYSID2: /* PHYS ID 2 */ + rc = (dev->dev_addr[2] << 10) & 0xFFFF; + break; + case MII_ADVERTISE: /* Advertisement control reg */ + rc = ADVERTISE_ALL; + break; + case MII_LPA: /* Link partner ability reg */ + rc = LPA_10HALF | LPA_10FULL | LPA_100HALF | LPA_100FULL | + LPA_100BASE4 | LPA_LPACK; + break; + case MII_EXPANSION: /* Expansion register */ + break; + case MII_DCOUNTER: /* disconnect counter */ + break; + case MII_FCSCOUNTER: /* false carrier counter */ + break; + case MII_NWAYTEST: /* N-way auto-neg test register */ + break; + case MII_RERRCOUNTER: /* rx error counter */ + rc = card->stats.rx_errors; + break; + case MII_SREVISION: /* silicon revision */ + break; + case MII_RESV1: /* reserved 1 */ + break; + case MII_LBRERROR: /* loopback, rx, bypass error */ + break; + case MII_PHYADDR: /* physical address */ + break; + case MII_RESV2: /* reserved 2 */ + break; + case MII_TPISTATUS: /* TPI status for 10mbps */ + break; + case MII_NCONFIG: /* network interface config */ + break; + default: + break; + } + return rc; +} +EXPORT_SYMBOL_GPL(qeth_mdio_read); + +static int qeth_send_ipa_snmp_cmd(struct qeth_card *card, + struct qeth_cmd_buffer *iob, int len, + int (*reply_cb)(struct qeth_card *, struct qeth_reply *, + unsigned long), + void *reply_param) +{ + u16 s1, s2; + + QETH_DBF_TEXT(trace, 4, "sendsnmp"); + + memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); + memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); + /* adjust PDU length fields in IPA_PDU_HEADER */ + s1 = (u32) IPA_PDU_HEADER_SIZE + len; + s2 = (u32) len; + memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); + memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); + return qeth_send_control_data(card, IPA_PDU_HEADER_SIZE + len, iob, + reply_cb, reply_param); +} + +static int qeth_snmp_command_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long sdata) +{ + struct qeth_ipa_cmd *cmd; + struct qeth_arp_query_info *qinfo; + struct qeth_snmp_cmd *snmp; + unsigned char *data; + __u16 data_len; + + QETH_DBF_TEXT(trace, 3, "snpcmdcb"); + + cmd = (struct qeth_ipa_cmd *) sdata; + data = (unsigned char *)((char *)cmd - reply->offset); + qinfo = (struct qeth_arp_query_info *) reply->param; + snmp = &cmd->data.setadapterparms.data.snmp; + + if (cmd->hdr.return_code) { + QETH_DBF_TEXT_(trace, 4, "scer1%i", cmd->hdr.return_code); + return 0; + } + if (cmd->data.setadapterparms.hdr.return_code) { + cmd->hdr.return_code = + cmd->data.setadapterparms.hdr.return_code; + QETH_DBF_TEXT_(trace, 4, "scer2%i", cmd->hdr.return_code); + return 0; + } + data_len = *((__u16 *)QETH_IPA_PDU_LEN_PDU1(data)); + if (cmd->data.setadapterparms.hdr.seq_no == 1) + data_len -= (__u16)((char *)&snmp->data - (char *)cmd); + else + data_len -= (__u16)((char *)&snmp->request - (char *)cmd); + + /* check if there is enough room in userspace */ + if ((qinfo->udata_len - qinfo->udata_offset) < data_len) { + QETH_DBF_TEXT_(trace, 4, "scer3%i", -ENOMEM); + cmd->hdr.return_code = -ENOMEM; + return 0; + } + QETH_DBF_TEXT_(trace, 4, "snore%i", + cmd->data.setadapterparms.hdr.used_total); + QETH_DBF_TEXT_(trace, 4, "sseqn%i", + cmd->data.setadapterparms.hdr.seq_no); + /*copy entries to user buffer*/ + if (cmd->data.setadapterparms.hdr.seq_no == 1) { + memcpy(qinfo->udata + qinfo->udata_offset, + (char *)snmp, + data_len + offsetof(struct qeth_snmp_cmd, data)); + qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data); + } else { + memcpy(qinfo->udata + qinfo->udata_offset, + (char *)&snmp->request, data_len); + } + qinfo->udata_offset += data_len; + /* check if all replies received ... */ + QETH_DBF_TEXT_(trace, 4, "srtot%i", + cmd->data.setadapterparms.hdr.used_total); + QETH_DBF_TEXT_(trace, 4, "srseq%i", + cmd->data.setadapterparms.hdr.seq_no); + if (cmd->data.setadapterparms.hdr.seq_no < + cmd->data.setadapterparms.hdr.used_total) + return 1; + return 0; +} + +int qeth_snmp_command(struct qeth_card *card, char __user *udata) +{ + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + struct qeth_snmp_ureq *ureq; + int req_len; + struct qeth_arp_query_info qinfo = {0, }; + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "snmpcmd"); + + if (card->info.guestlan) + return -EOPNOTSUPP; + + if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) && + (!card->options.layer2)) { + PRINT_WARN("SNMP Query MIBS not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + /* skip 4 bytes (data_len struct member) to get req_len */ + if (copy_from_user(&req_len, udata + sizeof(int), sizeof(int))) + return -EFAULT; + ureq = kmalloc(req_len+sizeof(struct qeth_snmp_ureq_hdr), GFP_KERNEL); + if (!ureq) { + QETH_DBF_TEXT(trace, 2, "snmpnome"); + return -ENOMEM; + } + if (copy_from_user(ureq, udata, + req_len + sizeof(struct qeth_snmp_ureq_hdr))) { + kfree(ureq); + return -EFAULT; + } + qinfo.udata_len = ureq->hdr.data_len; + qinfo.udata = kzalloc(qinfo.udata_len, GFP_KERNEL); + if (!qinfo.udata) { + kfree(ureq); + return -ENOMEM; + } + qinfo.udata_offset = sizeof(struct qeth_snmp_ureq_hdr); + + iob = qeth_get_adapter_cmd(card, IPA_SETADP_SET_SNMP_CONTROL, + QETH_SNMP_SETADP_CMDLENGTH + req_len); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + memcpy(&cmd->data.setadapterparms.data.snmp, &ureq->cmd, req_len); + rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, + qeth_snmp_command_cb, (void *)&qinfo); + if (rc) + PRINT_WARN("SNMP command failed on %s: (0x%x)\n", + QETH_CARD_IFNAME(card), rc); + else { + if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) + rc = -EFAULT; + } + + kfree(ureq); + kfree(qinfo.udata); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_snmp_command); + +static inline int qeth_get_qdio_q_format(struct qeth_card *card) +{ + switch (card->info.type) { + case QETH_CARD_TYPE_IQD: + return 2; + default: + return 0; + } +} + +static int qeth_qdio_establish(struct qeth_card *card) +{ + struct qdio_initialize init_data; + char *qib_param_field; + struct qdio_buffer **in_sbal_ptrs; + struct qdio_buffer **out_sbal_ptrs; + int i, j, k; + int rc = 0; + + QETH_DBF_TEXT(setup, 2, "qdioest"); + + qib_param_field = kzalloc(QDIO_MAX_BUFFERS_PER_Q * sizeof(char), + GFP_KERNEL); + if (!qib_param_field) + return -ENOMEM; + + qeth_create_qib_param_field(card, qib_param_field); + qeth_create_qib_param_field_blkt(card, qib_param_field); + + in_sbal_ptrs = kmalloc(QDIO_MAX_BUFFERS_PER_Q * sizeof(void *), + GFP_KERNEL); + if (!in_sbal_ptrs) { + kfree(qib_param_field); + return -ENOMEM; + } + for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; ++i) + in_sbal_ptrs[i] = (struct qdio_buffer *) + virt_to_phys(card->qdio.in_q->bufs[i].buffer); + + out_sbal_ptrs = + kmalloc(card->qdio.no_out_queues * QDIO_MAX_BUFFERS_PER_Q * + sizeof(void *), GFP_KERNEL); + if (!out_sbal_ptrs) { + kfree(in_sbal_ptrs); + kfree(qib_param_field); + return -ENOMEM; + } + for (i = 0, k = 0; i < card->qdio.no_out_queues; ++i) + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j, ++k) { + out_sbal_ptrs[k] = (struct qdio_buffer *)virt_to_phys( + card->qdio.out_qs[i]->bufs[j].buffer); + } + + memset(&init_data, 0, sizeof(struct qdio_initialize)); + init_data.cdev = CARD_DDEV(card); + init_data.q_format = qeth_get_qdio_q_format(card); + init_data.qib_param_field_format = 0; + init_data.qib_param_field = qib_param_field; + init_data.min_input_threshold = QETH_MIN_INPUT_THRESHOLD; + init_data.max_input_threshold = QETH_MAX_INPUT_THRESHOLD; + init_data.min_output_threshold = QETH_MIN_OUTPUT_THRESHOLD; + init_data.max_output_threshold = QETH_MAX_OUTPUT_THRESHOLD; + init_data.no_input_qs = 1; + init_data.no_output_qs = card->qdio.no_out_queues; + init_data.input_handler = card->discipline.input_handler; + init_data.output_handler = card->discipline.output_handler; + init_data.int_parm = (unsigned long) card; + init_data.flags = QDIO_INBOUND_0COPY_SBALS | + QDIO_OUTBOUND_0COPY_SBALS | + QDIO_USE_OUTBOUND_PCIS; + init_data.input_sbal_addr_array = (void **) in_sbal_ptrs; + init_data.output_sbal_addr_array = (void **) out_sbal_ptrs; + + if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED, + QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED) { + rc = qdio_initialize(&init_data); + if (rc) + atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED); + } + kfree(out_sbal_ptrs); + kfree(in_sbal_ptrs); + kfree(qib_param_field); + return rc; +} + +static void qeth_core_free_card(struct qeth_card *card) +{ + + QETH_DBF_TEXT(setup, 2, "freecrd"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + qeth_clean_channel(&card->read); + qeth_clean_channel(&card->write); + if (card->dev) + free_netdev(card->dev); + kfree(card->ip_tbd_list); + qeth_free_qdio_buffers(card); + kfree(card); +} + +static struct ccw_device_id qeth_ids[] = { + {CCW_DEVICE(0x1731, 0x01), .driver_info = QETH_CARD_TYPE_OSAE}, + {CCW_DEVICE(0x1731, 0x05), .driver_info = QETH_CARD_TYPE_IQD}, + {CCW_DEVICE(0x1731, 0x06), .driver_info = QETH_CARD_TYPE_OSN}, + {}, +}; +MODULE_DEVICE_TABLE(ccw, qeth_ids); + +static struct ccw_driver qeth_ccw_driver = { + .name = "qeth", + .ids = qeth_ids, + .probe = ccwgroup_probe_ccwdev, + .remove = ccwgroup_remove_ccwdev, +}; + +static int qeth_core_driver_group(const char *buf, struct device *root_dev, + unsigned long driver_id) +{ + const char *start, *end; + char bus_ids[3][BUS_ID_SIZE], *argv[3]; + int i; + + start = buf; + for (i = 0; i < 3; i++) { + static const char delim[] = { ',', ',', '\n' }; + int len; + + end = strchr(start, delim[i]); + if (!end) + return -EINVAL; + len = min_t(ptrdiff_t, BUS_ID_SIZE, end - start); + strncpy(bus_ids[i], start, len); + bus_ids[i][len] = '\0'; + start = end + 1; + argv[i] = bus_ids[i]; + } + + return (ccwgroup_create(root_dev, driver_id, + &qeth_ccw_driver, 3, argv)); +} + +int qeth_core_hardsetup_card(struct qeth_card *card) +{ + int retries = 3; + int mpno; + int rc; + + QETH_DBF_TEXT(setup, 2, "hrdsetup"); + atomic_set(&card->force_alloc_skb, 0); +retry: + if (retries < 3) { + PRINT_WARN("Retrying to do IDX activates.\n"); + ccw_device_set_offline(CARD_DDEV(card)); + ccw_device_set_offline(CARD_WDEV(card)); + ccw_device_set_offline(CARD_RDEV(card)); + ccw_device_set_online(CARD_RDEV(card)); + ccw_device_set_online(CARD_WDEV(card)); + ccw_device_set_online(CARD_DDEV(card)); + } + rc = qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD); + if (rc == -ERESTARTSYS) { + QETH_DBF_TEXT(setup, 2, "break1"); + return rc; + } else if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + if (--retries < 0) + goto out; + else + goto retry; + } + + rc = qeth_get_unitaddr(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + return rc; + } + + mpno = QETH_MAX_PORTNO; + if (card->info.portno > mpno) { + PRINT_ERR("Device %s does not offer port number %d \n.", + CARD_BUS_ID(card), card->info.portno); + rc = -ENODEV; + goto out; + } + qeth_init_tokens(card); + qeth_init_func_level(card); + rc = qeth_idx_activate_channel(&card->read, qeth_idx_read_cb); + if (rc == -ERESTARTSYS) { + QETH_DBF_TEXT(setup, 2, "break2"); + return rc; + } else if (rc) { + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + if (--retries < 0) + goto out; + else + goto retry; + } + rc = qeth_idx_activate_channel(&card->write, qeth_idx_write_cb); + if (rc == -ERESTARTSYS) { + QETH_DBF_TEXT(setup, 2, "break3"); + return rc; + } else if (rc) { + QETH_DBF_TEXT_(setup, 2, "4err%d", rc); + if (--retries < 0) + goto out; + else + goto retry; + } + rc = qeth_mpc_initialize(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "5err%d", rc); + goto out; + } + return 0; +out: + PRINT_ERR("Initialization in hardsetup failed! rc=%d\n", rc); + return rc; +} +EXPORT_SYMBOL_GPL(qeth_core_hardsetup_card); + +static inline int qeth_create_skb_frag(struct qdio_buffer_element *element, + struct sk_buff **pskb, int offset, int *pfrag, int data_len) +{ + struct page *page = virt_to_page(element->addr); + if (*pskb == NULL) { + /* the upper protocol layers assume that there is data in the + * skb itself. Copy a small amount (64 bytes) to make them + * happy. */ + *pskb = dev_alloc_skb(64 + ETH_HLEN); + if (!(*pskb)) + return -ENOMEM; + skb_reserve(*pskb, ETH_HLEN); + if (data_len <= 64) { + memcpy(skb_put(*pskb, data_len), element->addr + offset, + data_len); + } else { + get_page(page); + memcpy(skb_put(*pskb, 64), element->addr + offset, 64); + skb_fill_page_desc(*pskb, *pfrag, page, offset + 64, + data_len - 64); + (*pskb)->data_len += data_len - 64; + (*pskb)->len += data_len - 64; + (*pskb)->truesize += data_len - 64; + (*pfrag)++; + } + } else { + get_page(page); + skb_fill_page_desc(*pskb, *pfrag, page, offset, data_len); + (*pskb)->data_len += data_len; + (*pskb)->len += data_len; + (*pskb)->truesize += data_len; + (*pfrag)++; + } + return 0; +} + +struct sk_buff *qeth_core_get_next_skb(struct qeth_card *card, + struct qdio_buffer *buffer, + struct qdio_buffer_element **__element, int *__offset, + struct qeth_hdr **hdr) +{ + struct qdio_buffer_element *element = *__element; + int offset = *__offset; + struct sk_buff *skb = NULL; + int skb_len; + void *data_ptr; + int data_len; + int headroom = 0; + int use_rx_sg = 0; + int frag = 0; + + QETH_DBF_TEXT(trace, 6, "nextskb"); + /* qeth_hdr must not cross element boundaries */ + if (element->length < offset + sizeof(struct qeth_hdr)) { + if (qeth_is_last_sbale(element)) + return NULL; + element++; + offset = 0; + if (element->length < sizeof(struct qeth_hdr)) + return NULL; + } + *hdr = element->addr + offset; + + offset += sizeof(struct qeth_hdr); + if (card->options.layer2) { + if (card->info.type == QETH_CARD_TYPE_OSN) { + skb_len = (*hdr)->hdr.osn.pdu_length; + headroom = sizeof(struct qeth_hdr); + } else { + skb_len = (*hdr)->hdr.l2.pkt_length; + } + } else { + skb_len = (*hdr)->hdr.l3.length; + headroom = max((int)ETH_HLEN, (int)TR_HLEN); + } + + if (!skb_len) + return NULL; + + if ((skb_len >= card->options.rx_sg_cb) && + (!(card->info.type == QETH_CARD_TYPE_OSN)) && + (!atomic_read(&card->force_alloc_skb))) { + use_rx_sg = 1; + } else { + skb = dev_alloc_skb(skb_len + headroom); + if (!skb) + goto no_mem; + if (headroom) + skb_reserve(skb, headroom); + } + + data_ptr = element->addr + offset; + while (skb_len) { + data_len = min(skb_len, (int)(element->length - offset)); + if (data_len) { + if (use_rx_sg) { + if (qeth_create_skb_frag(element, &skb, offset, + &frag, data_len)) + goto no_mem; + } else { + memcpy(skb_put(skb, data_len), data_ptr, + data_len); + } + } + skb_len -= data_len; + if (skb_len) { + if (qeth_is_last_sbale(element)) { + QETH_DBF_TEXT(trace, 4, "unexeob"); + QETH_DBF_TEXT_(trace, 4, "%s", + CARD_BUS_ID(card)); + QETH_DBF_TEXT(qerr, 2, "unexeob"); + QETH_DBF_TEXT_(qerr, 2, "%s", + CARD_BUS_ID(card)); + QETH_DBF_HEX(misc, 4, buffer, sizeof(*buffer)); + dev_kfree_skb_any(skb); + card->stats.rx_errors++; + return NULL; + } + element++; + offset = 0; + data_ptr = element->addr; + } else { + offset += data_len; + } + } + *__element = element; + *__offset = offset; + if (use_rx_sg && card->options.performance_stats) { + card->perf_stats.sg_skbs_rx++; + card->perf_stats.sg_frags_rx += skb_shinfo(skb)->nr_frags; + } + return skb; +no_mem: + if (net_ratelimit()) { + PRINT_WARN("No memory for packet received on %s.\n", + QETH_CARD_IFNAME(card)); + QETH_DBF_TEXT(trace, 2, "noskbmem"); + QETH_DBF_TEXT_(trace, 2, "%s", CARD_BUS_ID(card)); + } + card->stats.rx_dropped++; + return NULL; +} +EXPORT_SYMBOL_GPL(qeth_core_get_next_skb); + +static void qeth_unregister_dbf_views(void) +{ + if (qeth_dbf_setup) + debug_unregister(qeth_dbf_setup); + if (qeth_dbf_qerr) + debug_unregister(qeth_dbf_qerr); + if (qeth_dbf_sense) + debug_unregister(qeth_dbf_sense); + if (qeth_dbf_misc) + debug_unregister(qeth_dbf_misc); + if (qeth_dbf_data) + debug_unregister(qeth_dbf_data); + if (qeth_dbf_control) + debug_unregister(qeth_dbf_control); + if (qeth_dbf_trace) + debug_unregister(qeth_dbf_trace); +} + +static int qeth_register_dbf_views(void) +{ + qeth_dbf_setup = debug_register(QETH_DBF_SETUP_NAME, + QETH_DBF_SETUP_PAGES, + QETH_DBF_SETUP_NR_AREAS, + QETH_DBF_SETUP_LEN); + qeth_dbf_misc = debug_register(QETH_DBF_MISC_NAME, + QETH_DBF_MISC_PAGES, + QETH_DBF_MISC_NR_AREAS, + QETH_DBF_MISC_LEN); + qeth_dbf_data = debug_register(QETH_DBF_DATA_NAME, + QETH_DBF_DATA_PAGES, + QETH_DBF_DATA_NR_AREAS, + QETH_DBF_DATA_LEN); + qeth_dbf_control = debug_register(QETH_DBF_CONTROL_NAME, + QETH_DBF_CONTROL_PAGES, + QETH_DBF_CONTROL_NR_AREAS, + QETH_DBF_CONTROL_LEN); + qeth_dbf_sense = debug_register(QETH_DBF_SENSE_NAME, + QETH_DBF_SENSE_PAGES, + QETH_DBF_SENSE_NR_AREAS, + QETH_DBF_SENSE_LEN); + qeth_dbf_qerr = debug_register(QETH_DBF_QERR_NAME, + QETH_DBF_QERR_PAGES, + QETH_DBF_QERR_NR_AREAS, + QETH_DBF_QERR_LEN); + qeth_dbf_trace = debug_register(QETH_DBF_TRACE_NAME, + QETH_DBF_TRACE_PAGES, + QETH_DBF_TRACE_NR_AREAS, + QETH_DBF_TRACE_LEN); + + if ((qeth_dbf_setup == NULL) || (qeth_dbf_misc == NULL) || + (qeth_dbf_data == NULL) || (qeth_dbf_control == NULL) || + (qeth_dbf_sense == NULL) || (qeth_dbf_qerr == NULL) || + (qeth_dbf_trace == NULL)) { + qeth_unregister_dbf_views(); + return -ENOMEM; + } + debug_register_view(qeth_dbf_setup, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_setup, QETH_DBF_SETUP_LEVEL); + + debug_register_view(qeth_dbf_misc, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_misc, QETH_DBF_MISC_LEVEL); + + debug_register_view(qeth_dbf_data, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_data, QETH_DBF_DATA_LEVEL); + + debug_register_view(qeth_dbf_control, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_control, QETH_DBF_CONTROL_LEVEL); + + debug_register_view(qeth_dbf_sense, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_sense, QETH_DBF_SENSE_LEVEL); + + debug_register_view(qeth_dbf_qerr, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_qerr, QETH_DBF_QERR_LEVEL); + + debug_register_view(qeth_dbf_trace, &debug_hex_ascii_view); + debug_set_level(qeth_dbf_trace, QETH_DBF_TRACE_LEVEL); + + return 0; +} + +int qeth_core_load_discipline(struct qeth_card *card, + enum qeth_discipline_id discipline) +{ + int rc = 0; + switch (discipline) { + case QETH_DISCIPLINE_LAYER3: + card->discipline.ccwgdriver = try_then_request_module( + symbol_get(qeth_l3_ccwgroup_driver), + "qeth_l3"); + break; + case QETH_DISCIPLINE_LAYER2: + card->discipline.ccwgdriver = try_then_request_module( + symbol_get(qeth_l2_ccwgroup_driver), + "qeth_l2"); + break; + } + if (!card->discipline.ccwgdriver) { + PRINT_ERR("Support for discipline %d not present\n", + discipline); + rc = -EINVAL; + } + return rc; +} + +void qeth_core_free_discipline(struct qeth_card *card) +{ + if (card->options.layer2) + symbol_put(qeth_l2_ccwgroup_driver); + else + symbol_put(qeth_l3_ccwgroup_driver); + card->discipline.ccwgdriver = NULL; +} + +static int qeth_core_probe_device(struct ccwgroup_device *gdev) +{ + struct qeth_card *card; + struct device *dev; + int rc; + unsigned long flags; + + QETH_DBF_TEXT(setup, 2, "probedev"); + + dev = &gdev->dev; + if (!get_device(dev)) + return -ENODEV; + + QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id); + + card = qeth_alloc_card(); + if (!card) { + QETH_DBF_TEXT_(setup, 2, "1err%d", -ENOMEM); + rc = -ENOMEM; + goto err_dev; + } + card->read.ccwdev = gdev->cdev[0]; + card->write.ccwdev = gdev->cdev[1]; + card->data.ccwdev = gdev->cdev[2]; + dev_set_drvdata(&gdev->dev, card); + card->gdev = gdev; + gdev->cdev[0]->handler = qeth_irq; + gdev->cdev[1]->handler = qeth_irq; + gdev->cdev[2]->handler = qeth_irq; + + rc = qeth_determine_card_type(card); + if (rc) { + PRINT_WARN("%s: not a valid card type\n", __func__); + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + goto err_card; + } + rc = qeth_setup_card(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + goto err_card; + } + + if (card->info.type == QETH_CARD_TYPE_OSN) { + rc = qeth_core_create_osn_attributes(dev); + if (rc) + goto err_card; + rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2); + if (rc) { + qeth_core_remove_osn_attributes(dev); + goto err_card; + } + rc = card->discipline.ccwgdriver->probe(card->gdev); + if (rc) { + qeth_core_free_discipline(card); + qeth_core_remove_osn_attributes(dev); + goto err_card; + } + } else { + rc = qeth_core_create_device_attributes(dev); + if (rc) + goto err_card; + } + + write_lock_irqsave(&qeth_core_card_list.rwlock, flags); + list_add_tail(&card->list, &qeth_core_card_list.list); + write_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); + return 0; + +err_card: + qeth_core_free_card(card); +err_dev: + put_device(dev); + return rc; +} + +static void qeth_core_remove_device(struct ccwgroup_device *gdev) +{ + unsigned long flags; + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + + if (card->discipline.ccwgdriver) { + card->discipline.ccwgdriver->remove(gdev); + qeth_core_free_discipline(card); + } + + if (card->info.type == QETH_CARD_TYPE_OSN) { + qeth_core_remove_osn_attributes(&gdev->dev); + } else { + qeth_core_remove_device_attributes(&gdev->dev); + } + write_lock_irqsave(&qeth_core_card_list.rwlock, flags); + list_del(&card->list); + write_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); + qeth_core_free_card(card); + dev_set_drvdata(&gdev->dev, NULL); + put_device(&gdev->dev); + return; +} + +static int qeth_core_set_online(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + int rc = 0; + int def_discipline; + + if (!card->discipline.ccwgdriver) { + if (card->info.type == QETH_CARD_TYPE_IQD) + def_discipline = QETH_DISCIPLINE_LAYER3; + else + def_discipline = QETH_DISCIPLINE_LAYER2; + rc = qeth_core_load_discipline(card, def_discipline); + if (rc) + goto err; + rc = card->discipline.ccwgdriver->probe(card->gdev); + if (rc) + goto err; + } + rc = card->discipline.ccwgdriver->set_online(gdev); +err: + return rc; +} + +static int qeth_core_set_offline(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + return card->discipline.ccwgdriver->set_offline(gdev); +} + +static void qeth_core_shutdown(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + if (card->discipline.ccwgdriver && + card->discipline.ccwgdriver->shutdown) + card->discipline.ccwgdriver->shutdown(gdev); +} + +static struct ccwgroup_driver qeth_core_ccwgroup_driver = { + .owner = THIS_MODULE, + .name = "qeth", + .driver_id = 0xD8C5E3C8, + .probe = qeth_core_probe_device, + .remove = qeth_core_remove_device, + .set_online = qeth_core_set_online, + .set_offline = qeth_core_set_offline, + .shutdown = qeth_core_shutdown, +}; + +static ssize_t +qeth_core_driver_group_store(struct device_driver *ddrv, const char *buf, + size_t count) +{ + int err; + err = qeth_core_driver_group(buf, qeth_core_root_dev, + qeth_core_ccwgroup_driver.driver_id); + if (err) + return err; + else + return count; +} + +static DRIVER_ATTR(group, 0200, NULL, qeth_core_driver_group_store); + +static struct { + const char str[ETH_GSTRING_LEN]; +} qeth_ethtool_stats_keys[] = { +/* 0 */{"rx skbs"}, + {"rx buffers"}, + {"tx skbs"}, + {"tx buffers"}, + {"tx skbs no packing"}, + {"tx buffers no packing"}, + {"tx skbs packing"}, + {"tx buffers packing"}, + {"tx sg skbs"}, + {"tx sg frags"}, +/* 10 */{"rx sg skbs"}, + {"rx sg frags"}, + {"rx sg page allocs"}, + {"tx large kbytes"}, + {"tx large count"}, + {"tx pk state ch n->p"}, + {"tx pk state ch p->n"}, + {"tx pk watermark low"}, + {"tx pk watermark high"}, + {"queue 0 buffer usage"}, +/* 20 */{"queue 1 buffer usage"}, + {"queue 2 buffer usage"}, + {"queue 3 buffer usage"}, + {"rx handler time"}, + {"rx handler count"}, + {"rx do_QDIO time"}, + {"rx do_QDIO count"}, + {"tx handler time"}, + {"tx handler count"}, + {"tx time"}, +/* 30 */{"tx count"}, + {"tx do_QDIO time"}, + {"tx do_QDIO count"}, +}; + +int qeth_core_get_stats_count(struct net_device *dev) +{ + return (sizeof(qeth_ethtool_stats_keys) / ETH_GSTRING_LEN); +} +EXPORT_SYMBOL_GPL(qeth_core_get_stats_count); + +void qeth_core_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct qeth_card *card = netdev_priv(dev); + data[0] = card->stats.rx_packets - + card->perf_stats.initial_rx_packets; + data[1] = card->perf_stats.bufs_rec; + data[2] = card->stats.tx_packets - + card->perf_stats.initial_tx_packets; + data[3] = card->perf_stats.bufs_sent; + data[4] = card->stats.tx_packets - card->perf_stats.initial_tx_packets + - card->perf_stats.skbs_sent_pack; + data[5] = card->perf_stats.bufs_sent - card->perf_stats.bufs_sent_pack; + data[6] = card->perf_stats.skbs_sent_pack; + data[7] = card->perf_stats.bufs_sent_pack; + data[8] = card->perf_stats.sg_skbs_sent; + data[9] = card->perf_stats.sg_frags_sent; + data[10] = card->perf_stats.sg_skbs_rx; + data[11] = card->perf_stats.sg_frags_rx; + data[12] = card->perf_stats.sg_alloc_page_rx; + data[13] = (card->perf_stats.large_send_bytes >> 10); + data[14] = card->perf_stats.large_send_cnt; + data[15] = card->perf_stats.sc_dp_p; + data[16] = card->perf_stats.sc_p_dp; + data[17] = QETH_LOW_WATERMARK_PACK; + data[18] = QETH_HIGH_WATERMARK_PACK; + data[19] = atomic_read(&card->qdio.out_qs[0]->used_buffers); + data[20] = (card->qdio.no_out_queues > 1) ? + atomic_read(&card->qdio.out_qs[1]->used_buffers) : 0; + data[21] = (card->qdio.no_out_queues > 2) ? + atomic_read(&card->qdio.out_qs[2]->used_buffers) : 0; + data[22] = (card->qdio.no_out_queues > 3) ? + atomic_read(&card->qdio.out_qs[3]->used_buffers) : 0; + data[23] = card->perf_stats.inbound_time; + data[24] = card->perf_stats.inbound_cnt; + data[25] = card->perf_stats.inbound_do_qdio_time; + data[26] = card->perf_stats.inbound_do_qdio_cnt; + data[27] = card->perf_stats.outbound_handler_time; + data[28] = card->perf_stats.outbound_handler_cnt; + data[29] = card->perf_stats.outbound_time; + data[30] = card->perf_stats.outbound_cnt; + data[31] = card->perf_stats.outbound_do_qdio_time; + data[32] = card->perf_stats.outbound_do_qdio_cnt; +} +EXPORT_SYMBOL_GPL(qeth_core_get_ethtool_stats); + +void qeth_core_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, &qeth_ethtool_stats_keys, + sizeof(qeth_ethtool_stats_keys)); + break; + default: + WARN_ON(1); + break; + } +} +EXPORT_SYMBOL_GPL(qeth_core_get_strings); + +void qeth_core_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct qeth_card *card = netdev_priv(dev); + if (card->options.layer2) + strcpy(info->driver, "qeth_l2"); + else + strcpy(info->driver, "qeth_l3"); + + strcpy(info->version, "1.0"); + strcpy(info->fw_version, card->info.mcl_level); + sprintf(info->bus_info, "%s/%s/%s", + CARD_RDEV_ID(card), + CARD_WDEV_ID(card), + CARD_DDEV_ID(card)); +} +EXPORT_SYMBOL_GPL(qeth_core_get_drvinfo); + +static int __init qeth_core_init(void) +{ + int rc; + + PRINT_INFO("loading core functions\n"); + INIT_LIST_HEAD(&qeth_core_card_list.list); + rwlock_init(&qeth_core_card_list.rwlock); + + rc = qeth_register_dbf_views(); + if (rc) + goto out_err; + rc = ccw_driver_register(&qeth_ccw_driver); + if (rc) + goto ccw_err; + rc = ccwgroup_driver_register(&qeth_core_ccwgroup_driver); + if (rc) + goto ccwgroup_err; + rc = driver_create_file(&qeth_core_ccwgroup_driver.driver, + &driver_attr_group); + if (rc) + goto driver_err; + qeth_core_root_dev = s390_root_dev_register("qeth"); + rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0; + if (rc) + goto register_err; + return 0; + +register_err: + driver_remove_file(&qeth_core_ccwgroup_driver.driver, + &driver_attr_group); +driver_err: + ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); +ccwgroup_err: + ccw_driver_unregister(&qeth_ccw_driver); +ccw_err: + qeth_unregister_dbf_views(); +out_err: + PRINT_ERR("Initialization failed with code %d\n", rc); + return rc; +} + +static void __exit qeth_core_exit(void) +{ + s390_root_dev_unregister(qeth_core_root_dev); + driver_remove_file(&qeth_core_ccwgroup_driver.driver, + &driver_attr_group); + ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); + ccw_driver_unregister(&qeth_ccw_driver); + qeth_unregister_dbf_views(); + PRINT_INFO("core functions removed\n"); +} + +module_init(qeth_core_init); +module_exit(qeth_core_exit); +MODULE_AUTHOR("Frank Blaschka "); +MODULE_DESCRIPTION("qeth core functions"); +MODULE_LICENSE("GPL"); diff --git a/drivers/s390/net/qeth_core_mpc.c b/drivers/s390/net/qeth_core_mpc.c new file mode 100644 index 0000000..8653b73 --- /dev/null +++ b/drivers/s390/net/qeth_core_mpc.c @@ -0,0 +1,266 @@ +/* + * drivers/s390/net/qeth_core_mpc.c + * + * Copyright IBM Corp. 2007 + * Author(s): Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include "qeth_core_mpc.h" + +unsigned char IDX_ACTIVATE_READ[] = { + 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x19, 0x01, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc1, + 0xd3, 0xd3, 0xd6, 0xd3, 0xc5, 0x40, 0x00, 0x00, + 0x00, 0x00 +}; + +unsigned char IDX_ACTIVATE_WRITE[] = { + 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x15, 0x01, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, + 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc1, + 0xd3, 0xd3, 0xd6, 0xd3, 0xc5, 0x40, 0x00, 0x00, + 0x00, 0x00 +}; + +unsigned char CM_ENABLE[] = { + 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x63, + 0x10, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, + 0x81, 0x7e, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x00, 0x23, + 0x00, 0x00, 0x23, 0x05, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x23, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x0c, 0x41, 0x02, 0x00, 0x17, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x0b, 0x04, 0x01, + 0x7e, 0x04, 0x05, 0x00, 0x01, 0x01, 0x0f, + 0x00, + 0x0c, 0x04, 0x02, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff +}; + +unsigned char CM_SETUP[] = { + 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x64, + 0x10, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, + 0x81, 0x7e, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x00, 0x24, + 0x00, 0x00, 0x24, 0x05, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x0c, 0x41, 0x04, 0x00, 0x18, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x09, 0x04, 0x04, + 0x05, 0x00, 0x01, 0x01, 0x11, + 0x00, 0x09, 0x04, + 0x05, 0x05, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x06, + 0x04, 0x06, 0xc8, 0x00 +}; + +unsigned char ULP_ENABLE[] = { + 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x6b, + 0x10, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, + 0x41, 0x7e, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x00, 0x2b, + 0x00, 0x00, 0x2b, 0x05, 0x20, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x0c, 0x41, 0x02, 0x00, 0x1f, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x0b, 0x04, 0x01, + 0x03, 0x04, 0x05, 0x00, 0x01, 0x01, 0x12, + 0x00, + 0x14, 0x04, 0x0a, 0x00, 0x20, 0x00, 0x00, 0xff, + 0xff, 0x00, 0x08, 0xc8, 0xe8, 0xc4, 0xf1, 0xc7, + 0xf1, 0x00, 0x00 +}; + +unsigned char ULP_SETUP[] = { + 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x6c, + 0x10, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, + 0x41, 0x7e, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x00, 0x01, 0x00, 0x24, 0x00, 0x2c, + 0x00, 0x00, 0x2c, 0x05, 0x20, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x2c, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x0c, 0x41, 0x04, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x09, 0x04, 0x04, + 0x05, 0x00, 0x01, 0x01, 0x14, + 0x00, 0x09, 0x04, + 0x05, 0x05, 0x30, 0x01, 0x00, 0x00, + 0x00, 0x06, + 0x04, 0x06, 0x40, 0x00, + 0x00, 0x08, 0x04, 0x0b, + 0x00, 0x00, 0x00, 0x00 +}; + +unsigned char DM_ACT[] = { + 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x55, + 0x10, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, + 0x41, 0x7e, 0x00, 0x01, 0x00, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x00, 0x02, 0x00, 0x24, 0x00, 0x15, + 0x00, 0x00, 0x2c, 0x05, 0x20, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x15, 0x00, 0x00, 0x00, 0x40, + 0x00, 0x0c, 0x43, 0x60, 0x00, 0x09, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x09, 0x04, 0x04, + 0x05, 0x40, 0x01, 0x01, 0x00 +}; + +unsigned char IPA_PDU_HEADER[] = { + 0x00, 0xe0, 0x00, 0x00, 0x77, 0x77, 0x77, 0x77, + 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, + (IPA_PDU_HEADER_SIZE+sizeof(struct qeth_ipa_cmd)) / 256, + (IPA_PDU_HEADER_SIZE+sizeof(struct qeth_ipa_cmd)) % 256, + 0x10, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0xc1, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, + sizeof(struct qeth_ipa_cmd) / 256, + sizeof(struct qeth_ipa_cmd) % 256, + 0x00, + sizeof(struct qeth_ipa_cmd) / 256, + sizeof(struct qeth_ipa_cmd) % 256, + 0x05, + 0x77, 0x77, 0x77, 0x77, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, + sizeof(struct qeth_ipa_cmd) / 256, + sizeof(struct qeth_ipa_cmd) % 256, + 0x00, 0x00, 0x00, 0x40, +}; +EXPORT_SYMBOL_GPL(IPA_PDU_HEADER); + +unsigned char WRITE_CCW[] = { + 0x01, CCW_FLAG_SLI, 0, 0, + 0, 0, 0, 0 +}; + +unsigned char READ_CCW[] = { + 0x02, CCW_FLAG_SLI, 0, 0, + 0, 0, 0, 0 +}; + + +struct ipa_rc_msg { + enum qeth_ipa_return_codes rc; + char *msg; +}; + +static struct ipa_rc_msg qeth_ipa_rc_msg[] = { + {IPA_RC_SUCCESS, "success"}, + {IPA_RC_NOTSUPP, "Command not supported"}, + {IPA_RC_IP_TABLE_FULL, "Add Addr IP Table Full - ipv6"}, + {IPA_RC_UNKNOWN_ERROR, "IPA command failed - reason unknown"}, + {IPA_RC_UNSUPPORTED_COMMAND, "Command not supported"}, + {IPA_RC_DUP_IPV6_REMOTE, "ipv6 address already registered remote"}, + {IPA_RC_DUP_IPV6_HOME, "ipv6 address already registered"}, + {IPA_RC_UNREGISTERED_ADDR, "Address not registered"}, + {IPA_RC_NO_ID_AVAILABLE, "No identifiers available"}, + {IPA_RC_ID_NOT_FOUND, "Identifier not found"}, + {IPA_RC_INVALID_IP_VERSION, "IP version incorrect"}, + {IPA_RC_LAN_FRAME_MISMATCH, "LAN and frame mismatch"}, + {IPA_RC_L2_UNSUPPORTED_CMD, "Unsupported layer 2 command"}, + {IPA_RC_L2_DUP_MAC, "Duplicate MAC address"}, + {IPA_RC_L2_ADDR_TABLE_FULL, "Layer2 address table full"}, + {IPA_RC_L2_DUP_LAYER3_MAC, "Duplicate with layer 3 MAC"}, + {IPA_RC_L2_GMAC_NOT_FOUND, "GMAC not found"}, + {IPA_RC_L2_MAC_NOT_FOUND, "L2 mac address not found"}, + {IPA_RC_L2_INVALID_VLAN_ID, "L2 invalid vlan id"}, + {IPA_RC_L2_DUP_VLAN_ID, "L2 duplicate vlan id"}, + {IPA_RC_L2_VLAN_ID_NOT_FOUND, "L2 vlan id not found"}, + {IPA_RC_DATA_MISMATCH, "Data field mismatch (v4/v6 mixed)"}, + {IPA_RC_INVALID_MTU_SIZE, "Invalid MTU size"}, + {IPA_RC_INVALID_LANTYPE, "Invalid LAN type"}, + {IPA_RC_INVALID_LANNUM, "Invalid LAN num"}, + {IPA_RC_DUPLICATE_IP_ADDRESS, "Address already registered"}, + {IPA_RC_IP_ADDR_TABLE_FULL, "IP address table full"}, + {IPA_RC_LAN_PORT_STATE_ERROR, "LAN port state error"}, + {IPA_RC_SETIP_NO_STARTLAN, "Setip no startlan received"}, + {IPA_RC_SETIP_ALREADY_RECEIVED, "Setip already received"}, + {IPA_RC_IP_ADDR_ALREADY_USED, "IP address already in use on LAN"}, + {IPA_RC_MULTICAST_FULL, "No task available, multicast full"}, + {IPA_RC_SETIP_INVALID_VERSION, "SETIP invalid IP version"}, + {IPA_RC_UNSUPPORTED_SUBCMD, "Unsupported assist subcommand"}, + {IPA_RC_ARP_ASSIST_NO_ENABLE, "Only partial success, no enable"}, + {IPA_RC_PRIMARY_ALREADY_DEFINED, "Primary already defined"}, + {IPA_RC_SECOND_ALREADY_DEFINED, "Secondary already defined"}, + {IPA_RC_INVALID_SETRTG_INDICATOR, "Invalid SETRTG indicator"}, + {IPA_RC_MC_ADDR_ALREADY_DEFINED, "Multicast address already defined"}, + {IPA_RC_LAN_OFFLINE, "STRTLAN_LAN_DISABLED - LAN offline"}, + {IPA_RC_INVALID_IP_VERSION2, "Invalid IP version"}, + {IPA_RC_FFFF, "Unknown Error"} +}; + + + +char *qeth_get_ipa_msg(enum qeth_ipa_return_codes rc) +{ + int x = 0; + qeth_ipa_rc_msg[sizeof(qeth_ipa_rc_msg) / + sizeof(struct ipa_rc_msg) - 1].rc = rc; + while (qeth_ipa_rc_msg[x].rc != rc) + x++; + return qeth_ipa_rc_msg[x].msg; +} + + +struct ipa_cmd_names { + enum qeth_ipa_cmds cmd; + char *name; +}; + +static struct ipa_cmd_names qeth_ipa_cmd_names[] = { + {IPA_CMD_STARTLAN, "startlan"}, + {IPA_CMD_STOPLAN, "stoplan"}, + {IPA_CMD_SETVMAC, "setvmac"}, + {IPA_CMD_DELVMAC, "delvmca"}, + {IPA_CMD_SETGMAC, "setgmac"}, + {IPA_CMD_DELGMAC, "delgmac"}, + {IPA_CMD_SETVLAN, "setvlan"}, + {IPA_CMD_DELVLAN, "delvlan"}, + {IPA_CMD_SETCCID, "setccid"}, + {IPA_CMD_DELCCID, "delccid"}, + {IPA_CMD_MODCCID, "modccid"}, + {IPA_CMD_SETIP, "setip"}, + {IPA_CMD_QIPASSIST, "qipassist"}, + {IPA_CMD_SETASSPARMS, "setassparms"}, + {IPA_CMD_SETIPM, "setipm"}, + {IPA_CMD_DELIPM, "delipm"}, + {IPA_CMD_SETRTG, "setrtg"}, + {IPA_CMD_DELIP, "delip"}, + {IPA_CMD_SETADAPTERPARMS, "setadapterparms"}, + {IPA_CMD_SET_DIAG_ASS, "set_diag_ass"}, + {IPA_CMD_CREATE_ADDR, "create_addr"}, + {IPA_CMD_DESTROY_ADDR, "destroy_addr"}, + {IPA_CMD_REGISTER_LOCAL_ADDR, "register_local_addr"}, + {IPA_CMD_UNREGISTER_LOCAL_ADDR, "unregister_local_addr"}, + {IPA_CMD_UNKNOWN, "unknown"}, +}; + +char *qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd) +{ + int x = 0; + qeth_ipa_cmd_names[ + sizeof(qeth_ipa_cmd_names) / + sizeof(struct ipa_cmd_names)-1].cmd = cmd; + while (qeth_ipa_cmd_names[x].cmd != cmd) + x++; + return qeth_ipa_cmd_names[x].name; +} diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h new file mode 100644 index 0000000..de22193 --- /dev/null +++ b/drivers/s390/net/qeth_core_mpc.h @@ -0,0 +1,566 @@ +/* + * drivers/s390/net/qeth_core_mpc.h + * + * Copyright IBM Corp. 2007 + * Author(s): Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#ifndef __QETH_CORE_MPC_H__ +#define __QETH_CORE_MPC_H__ + +#include + +#define IPA_PDU_HEADER_SIZE 0x40 +#define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer + 0x0e) +#define QETH_IPA_PDU_LEN_PDU1(buffer) (buffer + 0x26) +#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer + 0x29) +#define QETH_IPA_PDU_LEN_PDU3(buffer) (buffer + 0x3a) + +extern unsigned char IPA_PDU_HEADER[]; +#define QETH_IPA_CMD_DEST_ADDR(buffer) (buffer + 0x2c) + +#define IPA_CMD_LENGTH (IPA_PDU_HEADER_SIZE + sizeof(struct qeth_ipa_cmd)) + +#define QETH_SEQ_NO_LENGTH 4 +#define QETH_MPC_TOKEN_LENGTH 4 +#define QETH_MCL_LENGTH 4 +#define OSA_ADDR_LEN 6 + +#define QETH_TIMEOUT (10 * HZ) +#define QETH_IPA_TIMEOUT (45 * HZ) +#define QETH_IDX_COMMAND_SEQNO 0xffff0000 +#define SR_INFO_LEN 16 + +#define QETH_CLEAR_CHANNEL_PARM -10 +#define QETH_HALT_CHANNEL_PARM -11 +#define QETH_RCD_PARM -12 + +/*****************************************************************************/ +/* IP Assist related definitions */ +/*****************************************************************************/ +#define IPA_CMD_INITIATOR_HOST 0x00 +#define IPA_CMD_INITIATOR_OSA 0x01 +#define IPA_CMD_INITIATOR_HOST_REPLY 0x80 +#define IPA_CMD_INITIATOR_OSA_REPLY 0x81 +#define IPA_CMD_PRIM_VERSION_NO 0x01 + +enum qeth_card_types { + QETH_CARD_TYPE_UNKNOWN = 0, + QETH_CARD_TYPE_OSAE = 10, + QETH_CARD_TYPE_IQD = 1234, + QETH_CARD_TYPE_OSN = 11, +}; + +#define QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE 0x18 +/* only the first two bytes are looked at in qeth_get_cardname_short */ +enum qeth_link_types { + QETH_LINK_TYPE_FAST_ETH = 0x01, + QETH_LINK_TYPE_HSTR = 0x02, + QETH_LINK_TYPE_GBIT_ETH = 0x03, + QETH_LINK_TYPE_OSN = 0x04, + QETH_LINK_TYPE_10GBIT_ETH = 0x10, + QETH_LINK_TYPE_LANE_ETH100 = 0x81, + QETH_LINK_TYPE_LANE_TR = 0x82, + QETH_LINK_TYPE_LANE_ETH1000 = 0x83, + QETH_LINK_TYPE_LANE = 0x88, + QETH_LINK_TYPE_ATM_NATIVE = 0x90, +}; + +enum qeth_tr_macaddr_modes { + QETH_TR_MACADDR_NONCANONICAL = 0, + QETH_TR_MACADDR_CANONICAL = 1, +}; + +enum qeth_tr_broadcast_modes { + QETH_TR_BROADCAST_ALLRINGS = 0, + QETH_TR_BROADCAST_LOCAL = 1, +}; + +/* these values match CHECKSUM_* in include/linux/skbuff.h */ +enum qeth_checksum_types { + SW_CHECKSUMMING = 0, /* TODO: set to bit flag used in IPA Command */ + HW_CHECKSUMMING = 1, + NO_CHECKSUMMING = 2, +}; +#define QETH_CHECKSUM_DEFAULT SW_CHECKSUMMING + +/* + * Routing stuff + */ +#define RESET_ROUTING_FLAG 0x10 /* indicate that routing type shall be set */ +enum qeth_routing_types { + /* TODO: set to bit flag used in IPA Command */ + NO_ROUTER = 0, + PRIMARY_ROUTER = 1, + SECONDARY_ROUTER = 2, + MULTICAST_ROUTER = 3, + PRIMARY_CONNECTOR = 4, + SECONDARY_CONNECTOR = 5, +}; + +/* IPA Commands */ +enum qeth_ipa_cmds { + IPA_CMD_STARTLAN = 0x01, + IPA_CMD_STOPLAN = 0x02, + IPA_CMD_SETVMAC = 0x21, + IPA_CMD_DELVMAC = 0x22, + IPA_CMD_SETGMAC = 0x23, + IPA_CMD_DELGMAC = 0x24, + IPA_CMD_SETVLAN = 0x25, + IPA_CMD_DELVLAN = 0x26, + IPA_CMD_SETCCID = 0x41, + IPA_CMD_DELCCID = 0x42, + IPA_CMD_MODCCID = 0x43, + IPA_CMD_SETIP = 0xb1, + IPA_CMD_QIPASSIST = 0xb2, + IPA_CMD_SETASSPARMS = 0xb3, + IPA_CMD_SETIPM = 0xb4, + IPA_CMD_DELIPM = 0xb5, + IPA_CMD_SETRTG = 0xb6, + IPA_CMD_DELIP = 0xb7, + IPA_CMD_SETADAPTERPARMS = 0xb8, + IPA_CMD_SET_DIAG_ASS = 0xb9, + IPA_CMD_CREATE_ADDR = 0xc3, + IPA_CMD_DESTROY_ADDR = 0xc4, + IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1, + IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2, + IPA_CMD_UNKNOWN = 0x00 +}; + +enum qeth_ip_ass_cmds { + IPA_CMD_ASS_START = 0x0001, + IPA_CMD_ASS_STOP = 0x0002, + IPA_CMD_ASS_CONFIGURE = 0x0003, + IPA_CMD_ASS_ENABLE = 0x0004, +}; + +enum qeth_arp_process_subcmds { + IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003, + IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004, + IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005, + IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006, + IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007, + IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104, + IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204, +}; + + +/* Return Codes for IPA Commands + * according to OSA card Specs */ + +enum qeth_ipa_return_codes { + IPA_RC_SUCCESS = 0x0000, + IPA_RC_NOTSUPP = 0x0001, + IPA_RC_IP_TABLE_FULL = 0x0002, + IPA_RC_UNKNOWN_ERROR = 0x0003, + IPA_RC_UNSUPPORTED_COMMAND = 0x0004, + IPA_RC_DUP_IPV6_REMOTE = 0x0008, + IPA_RC_DUP_IPV6_HOME = 0x0010, + IPA_RC_UNREGISTERED_ADDR = 0x0011, + IPA_RC_NO_ID_AVAILABLE = 0x0012, + IPA_RC_ID_NOT_FOUND = 0x0013, + IPA_RC_INVALID_IP_VERSION = 0x0020, + IPA_RC_LAN_FRAME_MISMATCH = 0x0040, + IPA_RC_L2_UNSUPPORTED_CMD = 0x2003, + IPA_RC_L2_DUP_MAC = 0x2005, + IPA_RC_L2_ADDR_TABLE_FULL = 0x2006, + IPA_RC_L2_DUP_LAYER3_MAC = 0x200a, + IPA_RC_L2_GMAC_NOT_FOUND = 0x200b, + IPA_RC_L2_MAC_NOT_FOUND = 0x2010, + IPA_RC_L2_INVALID_VLAN_ID = 0x2015, + IPA_RC_L2_DUP_VLAN_ID = 0x2016, + IPA_RC_L2_VLAN_ID_NOT_FOUND = 0x2017, + IPA_RC_DATA_MISMATCH = 0xe001, + IPA_RC_INVALID_MTU_SIZE = 0xe002, + IPA_RC_INVALID_LANTYPE = 0xe003, + IPA_RC_INVALID_LANNUM = 0xe004, + IPA_RC_DUPLICATE_IP_ADDRESS = 0xe005, + IPA_RC_IP_ADDR_TABLE_FULL = 0xe006, + IPA_RC_LAN_PORT_STATE_ERROR = 0xe007, + IPA_RC_SETIP_NO_STARTLAN = 0xe008, + IPA_RC_SETIP_ALREADY_RECEIVED = 0xe009, + IPA_RC_IP_ADDR_ALREADY_USED = 0xe00a, + IPA_RC_MULTICAST_FULL = 0xe00b, + IPA_RC_SETIP_INVALID_VERSION = 0xe00d, + IPA_RC_UNSUPPORTED_SUBCMD = 0xe00e, + IPA_RC_ARP_ASSIST_NO_ENABLE = 0xe00f, + IPA_RC_PRIMARY_ALREADY_DEFINED = 0xe010, + IPA_RC_SECOND_ALREADY_DEFINED = 0xe011, + IPA_RC_INVALID_SETRTG_INDICATOR = 0xe012, + IPA_RC_MC_ADDR_ALREADY_DEFINED = 0xe013, + IPA_RC_LAN_OFFLINE = 0xe080, + IPA_RC_INVALID_IP_VERSION2 = 0xf001, + IPA_RC_FFFF = 0xffff +}; + +/* IPA function flags; each flag marks availability of respective function */ +enum qeth_ipa_funcs { + IPA_ARP_PROCESSING = 0x00000001L, + IPA_INBOUND_CHECKSUM = 0x00000002L, + IPA_OUTBOUND_CHECKSUM = 0x00000004L, + IPA_IP_FRAGMENTATION = 0x00000008L, + IPA_FILTERING = 0x00000010L, + IPA_IPV6 = 0x00000020L, + IPA_MULTICASTING = 0x00000040L, + IPA_IP_REASSEMBLY = 0x00000080L, + IPA_QUERY_ARP_COUNTERS = 0x00000100L, + IPA_QUERY_ARP_ADDR_INFO = 0x00000200L, + IPA_SETADAPTERPARMS = 0x00000400L, + IPA_VLAN_PRIO = 0x00000800L, + IPA_PASSTHRU = 0x00001000L, + IPA_FLUSH_ARP_SUPPORT = 0x00002000L, + IPA_FULL_VLAN = 0x00004000L, + IPA_INBOUND_PASSTHRU = 0x00008000L, + IPA_SOURCE_MAC = 0x00010000L, + IPA_OSA_MC_ROUTER = 0x00020000L, + IPA_QUERY_ARP_ASSIST = 0x00040000L, + IPA_INBOUND_TSO = 0x00080000L, + IPA_OUTBOUND_TSO = 0x00100000L, +}; + +/* SETIP/DELIP IPA Command: ***************************************************/ +enum qeth_ipa_setdelip_flags { + QETH_IPA_SETDELIP_DEFAULT = 0x00L, /* default */ + QETH_IPA_SETIP_VIPA_FLAG = 0x01L, /* no grat. ARP */ + QETH_IPA_SETIP_TAKEOVER_FLAG = 0x02L, /* nofail on grat. ARP */ + QETH_IPA_DELIP_ADDR_2_B_TAKEN_OVER = 0x20L, + QETH_IPA_DELIP_VIPA_FLAG = 0x40L, + QETH_IPA_DELIP_ADDR_NEEDS_SETIP = 0x80L, +}; + +/* SETADAPTER IPA Command: ****************************************************/ +enum qeth_ipa_setadp_cmd { + IPA_SETADP_QUERY_COMMANDS_SUPPORTED = 0x0001, + IPA_SETADP_ALTER_MAC_ADDRESS = 0x0002, + IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x0004, + IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x0008, + IPA_SETADP_SET_ADDRESSING_MODE = 0x0010, + IPA_SETADP_SET_CONFIG_PARMS = 0x0020, + IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x0040, + IPA_SETADP_SET_BROADCAST_MODE = 0x0080, + IPA_SETADP_SEND_OSA_MESSAGE = 0x0100, + IPA_SETADP_SET_SNMP_CONTROL = 0x0200, + IPA_SETADP_QUERY_CARD_INFO = 0x0400, + IPA_SETADP_SET_PROMISC_MODE = 0x0800, +}; +enum qeth_ipa_mac_ops { + CHANGE_ADDR_READ_MAC = 0, + CHANGE_ADDR_REPLACE_MAC = 1, + CHANGE_ADDR_ADD_MAC = 2, + CHANGE_ADDR_DEL_MAC = 4, + CHANGE_ADDR_RESET_MAC = 8, +}; +enum qeth_ipa_addr_ops { + CHANGE_ADDR_READ_ADDR = 0, + CHANGE_ADDR_ADD_ADDR = 1, + CHANGE_ADDR_DEL_ADDR = 2, + CHANGE_ADDR_FLUSH_ADDR_TABLE = 4, +}; +enum qeth_ipa_promisc_modes { + SET_PROMISC_MODE_OFF = 0, + SET_PROMISC_MODE_ON = 1, +}; + +/* (SET)DELIP(M) IPA stuff ***************************************************/ +struct qeth_ipacmd_setdelip4 { + __u8 ip_addr[4]; + __u8 mask[4]; + __u32 flags; +} __attribute__ ((packed)); + +struct qeth_ipacmd_setdelip6 { + __u8 ip_addr[16]; + __u8 mask[16]; + __u32 flags; +} __attribute__ ((packed)); + +struct qeth_ipacmd_setdelipm { + __u8 mac[6]; + __u8 padding[2]; + __u8 ip6[12]; + __u8 ip4[4]; +} __attribute__ ((packed)); + +struct qeth_ipacmd_layer2setdelmac { + __u32 mac_length; + __u8 mac[6]; +} __attribute__ ((packed)); + +struct qeth_ipacmd_layer2setdelvlan { + __u16 vlan_id; +} __attribute__ ((packed)); + + +struct qeth_ipacmd_setassparms_hdr { + __u32 assist_no; + __u16 length; + __u16 command_code; + __u16 return_code; + __u8 number_of_replies; + __u8 seq_no; +} __attribute__((packed)); + +struct qeth_arp_query_data { + __u16 request_bits; + __u16 reply_bits; + __u32 no_entries; + char data; +} __attribute__((packed)); + +/* used as parameter for arp_query reply */ +struct qeth_arp_query_info { + __u32 udata_len; + __u16 mask_bits; + __u32 udata_offset; + __u32 no_entries; + char *udata; +}; + +/* SETASSPARMS IPA Command: */ +struct qeth_ipacmd_setassparms { + struct qeth_ipacmd_setassparms_hdr hdr; + union { + __u32 flags_32bit; + struct qeth_arp_cache_entry add_arp_entry; + struct qeth_arp_query_data query_arp; + __u8 ip[16]; + } data; +} __attribute__ ((packed)); + + +/* SETRTG IPA Command: ****************************************************/ +struct qeth_set_routing { + __u8 type; +}; + +/* SETADAPTERPARMS IPA Command: *******************************************/ +struct qeth_query_cmds_supp { + __u32 no_lantypes_supp; + __u8 lan_type; + __u8 reserved1[3]; + __u32 supported_cmds; + __u8 reserved2[8]; +} __attribute__ ((packed)); + +struct qeth_change_addr { + __u32 cmd; + __u32 addr_size; + __u32 no_macs; + __u8 addr[OSA_ADDR_LEN]; +} __attribute__ ((packed)); + + +struct qeth_snmp_cmd { + __u8 token[16]; + __u32 request; + __u32 interface; + __u32 returncode; + __u32 firmwarelevel; + __u32 seqno; + __u8 data; +} __attribute__ ((packed)); + +struct qeth_snmp_ureq_hdr { + __u32 data_len; + __u32 req_len; + __u32 reserved1; + __u32 reserved2; +} __attribute__ ((packed)); + +struct qeth_snmp_ureq { + struct qeth_snmp_ureq_hdr hdr; + struct qeth_snmp_cmd cmd; +} __attribute__((packed)); + +struct qeth_ipacmd_setadpparms_hdr { + __u32 supp_hw_cmds; + __u32 reserved1; + __u16 cmdlength; + __u16 reserved2; + __u32 command_code; + __u16 return_code; + __u8 used_total; + __u8 seq_no; + __u32 reserved3; +} __attribute__ ((packed)); + +struct qeth_ipacmd_setadpparms { + struct qeth_ipacmd_setadpparms_hdr hdr; + union { + struct qeth_query_cmds_supp query_cmds_supp; + struct qeth_change_addr change_addr; + struct qeth_snmp_cmd snmp; + __u32 mode; + } data; +} __attribute__ ((packed)); + +/* CREATE_ADDR IPA Command: ***********************************************/ +struct qeth_create_destroy_address { + __u8 unique_id[8]; +} __attribute__ ((packed)); + +/* Header for each IPA command */ +struct qeth_ipacmd_hdr { + __u8 command; + __u8 initiator; + __u16 seqno; + __u16 return_code; + __u8 adapter_type; + __u8 rel_adapter_no; + __u8 prim_version_no; + __u8 param_count; + __u16 prot_version; + __u32 ipa_supported; + __u32 ipa_enabled; +} __attribute__ ((packed)); + +/* The IPA command itself */ +struct qeth_ipa_cmd { + struct qeth_ipacmd_hdr hdr; + union { + struct qeth_ipacmd_setdelip4 setdelip4; + struct qeth_ipacmd_setdelip6 setdelip6; + struct qeth_ipacmd_setdelipm setdelipm; + struct qeth_ipacmd_setassparms setassparms; + struct qeth_ipacmd_layer2setdelmac setdelmac; + struct qeth_ipacmd_layer2setdelvlan setdelvlan; + struct qeth_create_destroy_address create_destroy_addr; + struct qeth_ipacmd_setadpparms setadapterparms; + struct qeth_set_routing setrtg; + } data; +} __attribute__ ((packed)); + +/* + * special command for ARP processing. + * this is not included in setassparms command before, because we get + * problem with the size of struct qeth_ipacmd_setassparms otherwise + */ +enum qeth_ipa_arp_return_codes { + QETH_IPA_ARP_RC_SUCCESS = 0x0000, + QETH_IPA_ARP_RC_FAILED = 0x0001, + QETH_IPA_ARP_RC_NOTSUPP = 0x0002, + QETH_IPA_ARP_RC_OUT_OF_RANGE = 0x0003, + QETH_IPA_ARP_RC_Q_NOTSUPP = 0x0004, + QETH_IPA_ARP_RC_Q_NO_DATA = 0x0008, +}; + + +extern char *qeth_get_ipa_msg(enum qeth_ipa_return_codes rc); +extern char *qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd); + +#define QETH_SETASS_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \ + sizeof(struct qeth_ipacmd_setassparms_hdr)) +#define QETH_IPA_ARP_DATA_POS(buffer) (buffer + IPA_PDU_HEADER_SIZE + \ + QETH_SETASS_BASE_LEN) +#define QETH_SETADP_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \ + sizeof(struct qeth_ipacmd_setadpparms_hdr)) +#define QETH_SNMP_SETADP_CMDLENGTH 16 + +#define QETH_ARP_DATA_SIZE 3968 +#define QETH_ARP_CMD_LEN (QETH_ARP_DATA_SIZE + 8) +/* Helper functions */ +#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \ + (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY)) + +/*****************************************************************************/ +/* END OF IP Assist related definitions */ +/*****************************************************************************/ + + +extern unsigned char WRITE_CCW[]; +extern unsigned char READ_CCW[]; + +extern unsigned char CM_ENABLE[]; +#define CM_ENABLE_SIZE 0x63 +#define QETH_CM_ENABLE_ISSUER_RM_TOKEN(buffer) (buffer + 0x2c) +#define QETH_CM_ENABLE_FILTER_TOKEN(buffer) (buffer + 0x53) +#define QETH_CM_ENABLE_USER_DATA(buffer) (buffer + 0x5b) + +#define QETH_CM_ENABLE_RESP_FILTER_TOKEN(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x13) + + +extern unsigned char CM_SETUP[]; +#define CM_SETUP_SIZE 0x64 +#define QETH_CM_SETUP_DEST_ADDR(buffer) (buffer + 0x2c) +#define QETH_CM_SETUP_CONNECTION_TOKEN(buffer) (buffer + 0x51) +#define QETH_CM_SETUP_FILTER_TOKEN(buffer) (buffer + 0x5a) + +#define QETH_CM_SETUP_RESP_DEST_ADDR(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x1a) + +extern unsigned char ULP_ENABLE[]; +#define ULP_ENABLE_SIZE 0x6b +#define QETH_ULP_ENABLE_LINKNUM(buffer) (buffer + 0x61) +#define QETH_ULP_ENABLE_DEST_ADDR(buffer) (buffer + 0x2c) +#define QETH_ULP_ENABLE_FILTER_TOKEN(buffer) (buffer + 0x53) +#define QETH_ULP_ENABLE_PORTNAME_AND_LL(buffer) (buffer + 0x62) +#define QETH_ULP_ENABLE_RESP_FILTER_TOKEN(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x13) +#define QETH_ULP_ENABLE_RESP_MAX_MTU(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x1f) +#define QETH_ULP_ENABLE_RESP_DIFINFO_LEN(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x17) +#define QETH_ULP_ENABLE_RESP_LINK_TYPE(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x2b) +/* Layer 2 defintions */ +#define QETH_PROT_LAYER2 0x08 +#define QETH_PROT_TCPIP 0x03 +#define QETH_PROT_OSN2 0x0a +#define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer + 0x50) +#define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer + 0x19) + +extern unsigned char ULP_SETUP[]; +#define ULP_SETUP_SIZE 0x6c +#define QETH_ULP_SETUP_DEST_ADDR(buffer) (buffer + 0x2c) +#define QETH_ULP_SETUP_CONNECTION_TOKEN(buffer) (buffer + 0x51) +#define QETH_ULP_SETUP_FILTER_TOKEN(buffer) (buffer + 0x5a) +#define QETH_ULP_SETUP_CUA(buffer) (buffer + 0x68) +#define QETH_ULP_SETUP_REAL_DEVADDR(buffer) (buffer + 0x6a) + +#define QETH_ULP_SETUP_RESP_CONNECTION_TOKEN(buffer) \ + (PDU_ENCAPSULATION(buffer) + 0x1a) + + +extern unsigned char DM_ACT[]; +#define DM_ACT_SIZE 0x55 +#define QETH_DM_ACT_DEST_ADDR(buffer) (buffer + 0x2c) +#define QETH_DM_ACT_CONNECTION_TOKEN(buffer) (buffer + 0x51) + + + +#define QETH_TRANSPORT_HEADER_SEQ_NO(buffer) (buffer + 4) +#define QETH_PDU_HEADER_SEQ_NO(buffer) (buffer + 0x1c) +#define QETH_PDU_HEADER_ACK_SEQ_NO(buffer) (buffer + 0x20) + +extern unsigned char IDX_ACTIVATE_READ[]; +extern unsigned char IDX_ACTIVATE_WRITE[]; + +#define IDX_ACTIVATE_SIZE 0x22 +#define QETH_IDX_ACT_PNO(buffer) (buffer+0x0b) +#define QETH_IDX_ACT_ISSUER_RM_TOKEN(buffer) (buffer + 0x0c) +#define QETH_IDX_NO_PORTNAME_REQUIRED(buffer) ((buffer)[0x0b] & 0x80) +#define QETH_IDX_ACT_FUNC_LEVEL(buffer) (buffer + 0x10) +#define QETH_IDX_ACT_DATASET_NAME(buffer) (buffer + 0x16) +#define QETH_IDX_ACT_QDIO_DEV_CUA(buffer) (buffer + 0x1e) +#define QETH_IDX_ACT_QDIO_DEV_REALADDR(buffer) (buffer + 0x20) +#define QETH_IS_IDX_ACT_POS_REPLY(buffer) (((buffer)[0x08] & 3) == 2) +#define QETH_IDX_REPLY_LEVEL(buffer) (buffer + 0x12) +#define QETH_IDX_ACT_CAUSE_CODE(buffer) (buffer)[0x09] + +#define PDU_ENCAPSULATION(buffer) \ + (buffer + *(buffer + (*(buffer + 0x0b)) + \ + *(buffer + *(buffer + 0x0b) + 0x11) + 0x07)) + +#define IS_IPA(buffer) \ + ((buffer) && \ + (*(buffer + ((*(buffer + 0x0b)) + 4)) == 0xc1)) + +#define ADDR_FRAME_TYPE_DIX 1 +#define ADDR_FRAME_TYPE_802_3 2 +#define ADDR_FRAME_TYPE_TR_WITHOUT_SR 0x10 +#define ADDR_FRAME_TYPE_TR_WITH_SR 0x20 + +#endif diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c new file mode 100644 index 0000000..8b407d6 --- /dev/null +++ b/drivers/s390/net/qeth_core_offl.c @@ -0,0 +1,701 @@ +/* + * drivers/s390/net/qeth_core_offl.c + * + * Copyright IBM Corp. 2007 + * Author(s): Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "qeth_core.h" +#include "qeth_core_mpc.h" +#include "qeth_core_offl.h" + +int qeth_eddp_check_buffers_for_context(struct qeth_qdio_out_q *queue, + struct qeth_eddp_context *ctx) +{ + int index = queue->next_buf_to_fill; + int elements_needed = ctx->num_elements; + int elements_in_buffer; + int skbs_in_buffer; + int buffers_needed = 0; + + QETH_DBF_TEXT(trace, 5, "eddpcbfc"); + while (elements_needed > 0) { + buffers_needed++; + if (atomic_read(&queue->bufs[index].state) != + QETH_QDIO_BUF_EMPTY) + return -EBUSY; + + elements_in_buffer = QETH_MAX_BUFFER_ELEMENTS(queue->card) - + queue->bufs[index].next_element_to_fill; + skbs_in_buffer = elements_in_buffer / ctx->elements_per_skb; + elements_needed -= skbs_in_buffer * ctx->elements_per_skb; + index = (index + 1) % QDIO_MAX_BUFFERS_PER_Q; + } + return buffers_needed; +} + +static void qeth_eddp_free_context(struct qeth_eddp_context *ctx) +{ + int i; + + QETH_DBF_TEXT(trace, 5, "eddpfctx"); + for (i = 0; i < ctx->num_pages; ++i) + free_page((unsigned long)ctx->pages[i]); + kfree(ctx->pages); + kfree(ctx->elements); + kfree(ctx); +} + + +static void qeth_eddp_get_context(struct qeth_eddp_context *ctx) +{ + atomic_inc(&ctx->refcnt); +} + +void qeth_eddp_put_context(struct qeth_eddp_context *ctx) +{ + if (atomic_dec_return(&ctx->refcnt) == 0) + qeth_eddp_free_context(ctx); +} +EXPORT_SYMBOL_GPL(qeth_eddp_put_context); + +void qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf) +{ + struct qeth_eddp_context_reference *ref; + + QETH_DBF_TEXT(trace, 6, "eddprctx"); + while (!list_empty(&buf->ctx_list)) { + ref = list_entry(buf->ctx_list.next, + struct qeth_eddp_context_reference, list); + qeth_eddp_put_context(ref->ctx); + list_del(&ref->list); + kfree(ref); + } +} + +static int qeth_eddp_buf_ref_context(struct qeth_qdio_out_buffer *buf, + struct qeth_eddp_context *ctx) +{ + struct qeth_eddp_context_reference *ref; + + QETH_DBF_TEXT(trace, 6, "eddprfcx"); + ref = kmalloc(sizeof(struct qeth_eddp_context_reference), GFP_ATOMIC); + if (ref == NULL) + return -ENOMEM; + qeth_eddp_get_context(ctx); + ref->ctx = ctx; + list_add_tail(&ref->list, &buf->ctx_list); + return 0; +} + +int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, + struct qeth_eddp_context *ctx, int index) +{ + struct qeth_qdio_out_buffer *buf = NULL; + struct qdio_buffer *buffer; + int elements = ctx->num_elements; + int element = 0; + int flush_cnt = 0; + int must_refcnt = 1; + int i; + + QETH_DBF_TEXT(trace, 5, "eddpfibu"); + while (elements > 0) { + buf = &queue->bufs[index]; + if (atomic_read(&buf->state) != QETH_QDIO_BUF_EMPTY) { + /* normally this should not happen since we checked for + * available elements in qeth_check_elements_for_context + */ + if (element == 0) + return -EBUSY; + else { + PRINT_WARN("could only partially fill eddp " + "buffer!\n"); + goto out; + } + } + /* check if the whole next skb fits into current buffer */ + if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) - + buf->next_element_to_fill) + < ctx->elements_per_skb){ + /* no -> go to next buffer */ + atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); + index = (index + 1) % QDIO_MAX_BUFFERS_PER_Q; + flush_cnt++; + /* new buffer, so we have to add ctx to buffer'ctx_list + * and increment ctx's refcnt */ + must_refcnt = 1; + continue; + } + if (must_refcnt) { + must_refcnt = 0; + if (qeth_eddp_buf_ref_context(buf, ctx)) { + PRINT_WARN("no memory to create eddp context " + "reference\n"); + goto out_check; + } + } + buffer = buf->buffer; + /* fill one skb into buffer */ + for (i = 0; i < ctx->elements_per_skb; ++i) { + if (ctx->elements[element].length != 0) { + buffer->element[buf->next_element_to_fill]. + addr = ctx->elements[element].addr; + buffer->element[buf->next_element_to_fill]. + length = ctx->elements[element].length; + buffer->element[buf->next_element_to_fill]. + flags = ctx->elements[element].flags; + buf->next_element_to_fill++; + } + element++; + elements--; + } + } +out_check: + if (!queue->do_pack) { + QETH_DBF_TEXT(trace, 6, "fillbfnp"); + /* set state to PRIMED -> will be flushed */ + if (buf->next_element_to_fill > 0) { + atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); + flush_cnt++; + } + } else { + if (queue->card->options.performance_stats) + queue->card->perf_stats.skbs_sent_pack++; + QETH_DBF_TEXT(trace, 6, "fillbfpa"); + if (buf->next_element_to_fill >= + QETH_MAX_BUFFER_ELEMENTS(queue->card)) { + /* + * packed buffer if full -> set state PRIMED + * -> will be flushed + */ + atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); + flush_cnt++; + } + } +out: + return flush_cnt; +} + +static void qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx, + struct qeth_eddp_data *eddp, int data_len) +{ + u8 *page; + int page_remainder; + int page_offset; + int pkt_len; + struct qeth_eddp_element *element; + + QETH_DBF_TEXT(trace, 5, "eddpcrsh"); + page = ctx->pages[ctx->offset >> PAGE_SHIFT]; + page_offset = ctx->offset % PAGE_SIZE; + element = &ctx->elements[ctx->num_elements]; + pkt_len = eddp->nhl + eddp->thl + data_len; + /* FIXME: layer2 and VLAN !!! */ + if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) + pkt_len += ETH_HLEN; + if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) + pkt_len += VLAN_HLEN; + /* does complete packet fit in current page ? */ + page_remainder = PAGE_SIZE - page_offset; + if (page_remainder < (sizeof(struct qeth_hdr) + pkt_len)) { + /* no -> go to start of next page */ + ctx->offset += page_remainder; + page = ctx->pages[ctx->offset >> PAGE_SHIFT]; + page_offset = 0; + } + memcpy(page + page_offset, &eddp->qh, sizeof(struct qeth_hdr)); + element->addr = page + page_offset; + element->length = sizeof(struct qeth_hdr); + ctx->offset += sizeof(struct qeth_hdr); + page_offset += sizeof(struct qeth_hdr); + /* add mac header (?) */ + if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { + memcpy(page + page_offset, &eddp->mac, ETH_HLEN); + element->length += ETH_HLEN; + ctx->offset += ETH_HLEN; + page_offset += ETH_HLEN; + } + /* add VLAN tag */ + if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) { + memcpy(page + page_offset, &eddp->vlan, VLAN_HLEN); + element->length += VLAN_HLEN; + ctx->offset += VLAN_HLEN; + page_offset += VLAN_HLEN; + } + /* add network header */ + memcpy(page + page_offset, (u8 *)&eddp->nh, eddp->nhl); + element->length += eddp->nhl; + eddp->nh_in_ctx = page + page_offset; + ctx->offset += eddp->nhl; + page_offset += eddp->nhl; + /* add transport header */ + memcpy(page + page_offset, (u8 *)&eddp->th, eddp->thl); + element->length += eddp->thl; + eddp->th_in_ctx = page + page_offset; + ctx->offset += eddp->thl; +} + +static void qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, + int len, __wsum *hcsum) +{ + struct skb_frag_struct *frag; + int left_in_frag; + int copy_len; + u8 *src; + + QETH_DBF_TEXT(trace, 5, "eddpcdtc"); + if (skb_shinfo(eddp->skb)->nr_frags == 0) { + skb_copy_from_linear_data_offset(eddp->skb, eddp->skb_offset, + dst, len); + *hcsum = csum_partial(eddp->skb->data + eddp->skb_offset, len, + *hcsum); + eddp->skb_offset += len; + } else { + while (len > 0) { + if (eddp->frag < 0) { + /* we're in skb->data */ + left_in_frag = (eddp->skb->len - + eddp->skb->data_len) + - eddp->skb_offset; + src = eddp->skb->data + eddp->skb_offset; + } else { + frag = &skb_shinfo(eddp->skb)->frags[ + eddp->frag]; + left_in_frag = frag->size - eddp->frag_offset; + src = (u8 *)((page_to_pfn(frag->page) << + PAGE_SHIFT) + frag->page_offset + + eddp->frag_offset); + } + if (left_in_frag <= 0) { + eddp->frag++; + eddp->frag_offset = 0; + continue; + } + copy_len = min(left_in_frag, len); + memcpy(dst, src, copy_len); + *hcsum = csum_partial(src, copy_len, *hcsum); + dst += copy_len; + eddp->frag_offset += copy_len; + eddp->skb_offset += copy_len; + len -= copy_len; + } + } +} + +static void qeth_eddp_create_segment_data_tcp(struct qeth_eddp_context *ctx, + struct qeth_eddp_data *eddp, int data_len, __wsum hcsum) +{ + u8 *page; + int page_remainder; + int page_offset; + struct qeth_eddp_element *element; + int first_lap = 1; + + QETH_DBF_TEXT(trace, 5, "eddpcsdt"); + page = ctx->pages[ctx->offset >> PAGE_SHIFT]; + page_offset = ctx->offset % PAGE_SIZE; + element = &ctx->elements[ctx->num_elements]; + while (data_len) { + page_remainder = PAGE_SIZE - page_offset; + if (page_remainder < data_len) { + qeth_eddp_copy_data_tcp(page + page_offset, eddp, + page_remainder, &hcsum); + element->length += page_remainder; + if (first_lap) + element->flags = SBAL_FLAGS_FIRST_FRAG; + else + element->flags = SBAL_FLAGS_MIDDLE_FRAG; + ctx->num_elements++; + element++; + data_len -= page_remainder; + ctx->offset += page_remainder; + page = ctx->pages[ctx->offset >> PAGE_SHIFT]; + page_offset = 0; + element->addr = page + page_offset; + } else { + qeth_eddp_copy_data_tcp(page + page_offset, eddp, + data_len, &hcsum); + element->length += data_len; + if (!first_lap) + element->flags = SBAL_FLAGS_LAST_FRAG; + ctx->num_elements++; + ctx->offset += data_len; + data_len = 0; + } + first_lap = 0; + } + ((struct tcphdr *)eddp->th_in_ctx)->check = csum_fold(hcsum); +} + +static __wsum qeth_eddp_check_tcp4_hdr(struct qeth_eddp_data *eddp, + int data_len) +{ + __wsum phcsum; /* pseudo header checksum */ + + QETH_DBF_TEXT(trace, 5, "eddpckt4"); + eddp->th.tcp.h.check = 0; + /* compute pseudo header checksum */ + phcsum = csum_tcpudp_nofold(eddp->nh.ip4.h.saddr, eddp->nh.ip4.h.daddr, + eddp->thl + data_len, IPPROTO_TCP, 0); + /* compute checksum of tcp header */ + return csum_partial((u8 *)&eddp->th, eddp->thl, phcsum); +} + +static __wsum qeth_eddp_check_tcp6_hdr(struct qeth_eddp_data *eddp, + int data_len) +{ + __be32 proto; + __wsum phcsum; /* pseudo header checksum */ + + QETH_DBF_TEXT(trace, 5, "eddpckt6"); + eddp->th.tcp.h.check = 0; + /* compute pseudo header checksum */ + phcsum = csum_partial((u8 *)&eddp->nh.ip6.h.saddr, + sizeof(struct in6_addr), 0); + phcsum = csum_partial((u8 *)&eddp->nh.ip6.h.daddr, + sizeof(struct in6_addr), phcsum); + proto = htonl(IPPROTO_TCP); + phcsum = csum_partial((u8 *)&proto, sizeof(u32), phcsum); + return phcsum; +} + +static struct qeth_eddp_data *qeth_eddp_create_eddp_data(struct qeth_hdr *qh, + u8 *nh, u8 nhl, u8 *th, u8 thl) +{ + struct qeth_eddp_data *eddp; + + QETH_DBF_TEXT(trace, 5, "eddpcrda"); + eddp = kzalloc(sizeof(struct qeth_eddp_data), GFP_ATOMIC); + if (eddp) { + eddp->nhl = nhl; + eddp->thl = thl; + memcpy(&eddp->qh, qh, sizeof(struct qeth_hdr)); + memcpy(&eddp->nh, nh, nhl); + memcpy(&eddp->th, th, thl); + eddp->frag = -1; /* initially we're in skb->data */ + } + return eddp; +} + +static void __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, + struct qeth_eddp_data *eddp) +{ + struct tcphdr *tcph; + int data_len; + __wsum hcsum; + + QETH_DBF_TEXT(trace, 5, "eddpftcp"); + eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl; + if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { + eddp->skb_offset += sizeof(struct ethhdr); + if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) + eddp->skb_offset += VLAN_HLEN; + } + tcph = tcp_hdr(eddp->skb); + while (eddp->skb_offset < eddp->skb->len) { + data_len = min((int)skb_shinfo(eddp->skb)->gso_size, + (int)(eddp->skb->len - eddp->skb_offset)); + /* prepare qdio hdr */ + if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { + eddp->qh.hdr.l2.pkt_length = data_len + ETH_HLEN + + eddp->nhl + eddp->thl; + if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) + eddp->qh.hdr.l2.pkt_length += VLAN_HLEN; + } else + eddp->qh.hdr.l3.length = data_len + eddp->nhl + + eddp->thl; + /* prepare ip hdr */ + if (eddp->skb->protocol == htons(ETH_P_IP)) { + eddp->nh.ip4.h.tot_len = htons(data_len + eddp->nhl + + eddp->thl); + eddp->nh.ip4.h.check = 0; + eddp->nh.ip4.h.check = + ip_fast_csum((u8 *)&eddp->nh.ip4.h, + eddp->nh.ip4.h.ihl); + } else + eddp->nh.ip6.h.payload_len = htons(data_len + + eddp->thl); + /* prepare tcp hdr */ + if (data_len == (eddp->skb->len - eddp->skb_offset)) { + /* last segment -> set FIN and PSH flags */ + eddp->th.tcp.h.fin = tcph->fin; + eddp->th.tcp.h.psh = tcph->psh; + } + if (eddp->skb->protocol == htons(ETH_P_IP)) + hcsum = qeth_eddp_check_tcp4_hdr(eddp, data_len); + else + hcsum = qeth_eddp_check_tcp6_hdr(eddp, data_len); + /* fill the next segment into the context */ + qeth_eddp_create_segment_hdrs(ctx, eddp, data_len); + qeth_eddp_create_segment_data_tcp(ctx, eddp, data_len, hcsum); + if (eddp->skb_offset >= eddp->skb->len) + break; + /* prepare headers for next round */ + if (eddp->skb->protocol == htons(ETH_P_IP)) + eddp->nh.ip4.h.id = htons(ntohs(eddp->nh.ip4.h.id) + 1); + eddp->th.tcp.h.seq = htonl(ntohl(eddp->th.tcp.h.seq) + + data_len); + } +} + +static int qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, + struct sk_buff *skb, struct qeth_hdr *qhdr) +{ + struct qeth_eddp_data *eddp = NULL; + + QETH_DBF_TEXT(trace, 5, "eddpficx"); + /* create our segmentation headers and copy original headers */ + if (skb->protocol == htons(ETH_P_IP)) + eddp = qeth_eddp_create_eddp_data(qhdr, + skb_network_header(skb), + ip_hdrlen(skb), + skb_transport_header(skb), + tcp_hdrlen(skb)); + else + eddp = qeth_eddp_create_eddp_data(qhdr, + skb_network_header(skb), + sizeof(struct ipv6hdr), + skb_transport_header(skb), + tcp_hdrlen(skb)); + + if (eddp == NULL) { + QETH_DBF_TEXT(trace, 2, "eddpfcnm"); + return -ENOMEM; + } + if (qhdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { + skb_set_mac_header(skb, sizeof(struct qeth_hdr)); + memcpy(&eddp->mac, eth_hdr(skb), ETH_HLEN); + if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) { + eddp->vlan[0] = skb->protocol; + eddp->vlan[1] = htons(vlan_tx_tag_get(skb)); + } + } + /* the next flags will only be set on the last segment */ + eddp->th.tcp.h.fin = 0; + eddp->th.tcp.h.psh = 0; + eddp->skb = skb; + /* begin segmentation and fill context */ + __qeth_eddp_fill_context_tcp(ctx, eddp); + kfree(eddp); + return 0; +} + +static void qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, + struct sk_buff *skb, int hdr_len) +{ + int skbs_per_page; + + QETH_DBF_TEXT(trace, 5, "eddpcanp"); + /* can we put multiple skbs in one page? */ + skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->gso_size + hdr_len); + if (skbs_per_page > 1) { + ctx->num_pages = (skb_shinfo(skb)->gso_segs + 1) / + skbs_per_page + 1; + ctx->elements_per_skb = 1; + } else { + /* no -> how many elements per skb? */ + ctx->elements_per_skb = (skb_shinfo(skb)->gso_size + hdr_len + + PAGE_SIZE) >> PAGE_SHIFT; + ctx->num_pages = ctx->elements_per_skb * + (skb_shinfo(skb)->gso_segs + 1); + } + ctx->num_elements = ctx->elements_per_skb * + (skb_shinfo(skb)->gso_segs + 1); +} + +static struct qeth_eddp_context *qeth_eddp_create_context_generic( + struct qeth_card *card, struct sk_buff *skb, int hdr_len) +{ + struct qeth_eddp_context *ctx = NULL; + u8 *addr; + int i; + + QETH_DBF_TEXT(trace, 5, "creddpcg"); + /* create the context and allocate pages */ + ctx = kzalloc(sizeof(struct qeth_eddp_context), GFP_ATOMIC); + if (ctx == NULL) { + QETH_DBF_TEXT(trace, 2, "ceddpcn1"); + return NULL; + } + ctx->type = QETH_LARGE_SEND_EDDP; + qeth_eddp_calc_num_pages(ctx, skb, hdr_len); + if (ctx->elements_per_skb > QETH_MAX_BUFFER_ELEMENTS(card)) { + QETH_DBF_TEXT(trace, 2, "ceddpcis"); + kfree(ctx); + return NULL; + } + ctx->pages = kcalloc(ctx->num_pages, sizeof(u8 *), GFP_ATOMIC); + if (ctx->pages == NULL) { + QETH_DBF_TEXT(trace, 2, "ceddpcn2"); + kfree(ctx); + return NULL; + } + for (i = 0; i < ctx->num_pages; ++i) { + addr = (u8 *)get_zeroed_page(GFP_ATOMIC); + if (addr == NULL) { + QETH_DBF_TEXT(trace, 2, "ceddpcn3"); + ctx->num_pages = i; + qeth_eddp_free_context(ctx); + return NULL; + } + ctx->pages[i] = addr; + } + ctx->elements = kcalloc(ctx->num_elements, + sizeof(struct qeth_eddp_element), GFP_ATOMIC); + if (ctx->elements == NULL) { + QETH_DBF_TEXT(trace, 2, "ceddpcn4"); + qeth_eddp_free_context(ctx); + return NULL; + } + /* reset num_elements; will be incremented again in fill_buffer to + * reflect number of actually used elements */ + ctx->num_elements = 0; + return ctx; +} + +static struct qeth_eddp_context *qeth_eddp_create_context_tcp( + struct qeth_card *card, struct sk_buff *skb, + struct qeth_hdr *qhdr) +{ + struct qeth_eddp_context *ctx = NULL; + + QETH_DBF_TEXT(trace, 5, "creddpct"); + if (skb->protocol == htons(ETH_P_IP)) + ctx = qeth_eddp_create_context_generic(card, skb, + (sizeof(struct qeth_hdr) + + ip_hdrlen(skb) + + tcp_hdrlen(skb))); + else if (skb->protocol == htons(ETH_P_IPV6)) + ctx = qeth_eddp_create_context_generic(card, skb, + sizeof(struct qeth_hdr) + sizeof(struct ipv6hdr) + + tcp_hdrlen(skb)); + else + QETH_DBF_TEXT(trace, 2, "cetcpinv"); + + if (ctx == NULL) { + QETH_DBF_TEXT(trace, 2, "creddpnl"); + return NULL; + } + if (qeth_eddp_fill_context_tcp(ctx, skb, qhdr)) { + QETH_DBF_TEXT(trace, 2, "ceddptfe"); + qeth_eddp_free_context(ctx); + return NULL; + } + atomic_set(&ctx->refcnt, 1); + return ctx; +} + +struct qeth_eddp_context *qeth_eddp_create_context(struct qeth_card *card, + struct sk_buff *skb, struct qeth_hdr *qhdr, + unsigned char sk_protocol) +{ + QETH_DBF_TEXT(trace, 5, "creddpc"); + switch (sk_protocol) { + case IPPROTO_TCP: + return qeth_eddp_create_context_tcp(card, skb, qhdr); + default: + QETH_DBF_TEXT(trace, 2, "eddpinvp"); + } + return NULL; +} +EXPORT_SYMBOL_GPL(qeth_eddp_create_context); + +void qeth_tso_fill_header(struct qeth_card *card, struct qeth_hdr *qhdr, + struct sk_buff *skb) +{ + struct qeth_hdr_tso *hdr = (struct qeth_hdr_tso *)qhdr; + struct tcphdr *tcph = tcp_hdr(skb); + struct iphdr *iph = ip_hdr(skb); + struct ipv6hdr *ip6h = ipv6_hdr(skb); + + QETH_DBF_TEXT(trace, 5, "tsofhdr"); + + /*fix header to TSO values ...*/ + hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO; + /*set values which are fix for the first approach ...*/ + hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso); + hdr->ext.imb_hdr_no = 1; + hdr->ext.hdr_type = 1; + hdr->ext.hdr_version = 1; + hdr->ext.hdr_len = 28; + /*insert non-fix values */ + hdr->ext.mss = skb_shinfo(skb)->gso_size; + hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4); + hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len - + sizeof(struct qeth_hdr_tso)); + tcph->check = 0; + if (skb->protocol == ETH_P_IPV6) { + ip6h->payload_len = 0; + tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, + 0, IPPROTO_TCP, 0); + } else { + /*OSA want us to set these values ...*/ + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + 0, IPPROTO_TCP, 0); + iph->tot_len = 0; + iph->check = 0; + } +} +EXPORT_SYMBOL_GPL(qeth_tso_fill_header); + +void qeth_tx_csum(struct sk_buff *skb) +{ + int tlen; + if (skb->protocol == htons(ETH_P_IP)) { + tlen = ntohs(ip_hdr(skb)->tot_len) - (ip_hdr(skb)->ihl << 2); + switch (ip_hdr(skb)->protocol) { + case IPPROTO_TCP: + tcp_hdr(skb)->check = 0; + tcp_hdr(skb)->check = csum_tcpudp_magic( + ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, + tlen, ip_hdr(skb)->protocol, + skb_checksum(skb, skb_transport_offset(skb), + tlen, 0)); + break; + case IPPROTO_UDP: + udp_hdr(skb)->check = 0; + udp_hdr(skb)->check = csum_tcpudp_magic( + ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, + tlen, ip_hdr(skb)->protocol, + skb_checksum(skb, skb_transport_offset(skb), + tlen, 0)); + break; + } + } else if (skb->protocol == htons(ETH_P_IPV6)) { + switch (ipv6_hdr(skb)->nexthdr) { + case IPPROTO_TCP: + tcp_hdr(skb)->check = 0; + tcp_hdr(skb)->check = csum_ipv6_magic( + &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + ipv6_hdr(skb)->payload_len, + ipv6_hdr(skb)->nexthdr, + skb_checksum(skb, skb_transport_offset(skb), + ipv6_hdr(skb)->payload_len, 0)); + break; + case IPPROTO_UDP: + udp_hdr(skb)->check = 0; + udp_hdr(skb)->check = csum_ipv6_magic( + &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + ipv6_hdr(skb)->payload_len, + ipv6_hdr(skb)->nexthdr, + skb_checksum(skb, skb_transport_offset(skb), + ipv6_hdr(skb)->payload_len, 0)); + break; + } + } +} +EXPORT_SYMBOL_GPL(qeth_tx_csum); diff --git a/drivers/s390/net/qeth_core_offl.h b/drivers/s390/net/qeth_core_offl.h new file mode 100644 index 0000000..86bf7df --- /dev/null +++ b/drivers/s390/net/qeth_core_offl.h @@ -0,0 +1,76 @@ +/* + * drivers/s390/net/qeth_core_offl.h + * + * Copyright IBM Corp. 2007 + * Author(s): Thomas Spatzier , + * Frank Blaschka + */ + +#ifndef __QETH_CORE_OFFL_H__ +#define __QETH_CORE_OFFL_H__ + +struct qeth_eddp_element { + u32 flags; + u32 length; + void *addr; +}; + +struct qeth_eddp_context { + atomic_t refcnt; + enum qeth_large_send_types type; + int num_pages; /* # of allocated pages */ + u8 **pages; /* pointers to pages */ + int offset; /* offset in ctx during creation */ + int num_elements; /* # of required 'SBALEs' */ + struct qeth_eddp_element *elements; /* array of 'SBALEs' */ + int elements_per_skb; /* # of 'SBALEs' per skb **/ +}; + +struct qeth_eddp_context_reference { + struct list_head list; + struct qeth_eddp_context *ctx; +}; + +struct qeth_eddp_data { + struct qeth_hdr qh; + struct ethhdr mac; + __be16 vlan[2]; + union { + struct { + struct iphdr h; + u8 options[40]; + } ip4; + struct { + struct ipv6hdr h; + } ip6; + } nh; + u8 nhl; + void *nh_in_ctx; /* address of nh within the ctx */ + union { + struct { + struct tcphdr h; + u8 options[40]; + } tcp; + } th; + u8 thl; + void *th_in_ctx; /* address of th within the ctx */ + struct sk_buff *skb; + int skb_offset; + int frag; + int frag_offset; +} __attribute__ ((packed)); + +extern struct qeth_eddp_context *qeth_eddp_create_context(struct qeth_card *, + struct sk_buff *, struct qeth_hdr *, unsigned char); +extern void qeth_eddp_put_context(struct qeth_eddp_context *); +extern int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *, + struct qeth_eddp_context *, int); +extern void qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *); +extern int qeth_eddp_check_buffers_for_context(struct qeth_qdio_out_q *, + struct qeth_eddp_context *); + +void qeth_tso_fill_header(struct qeth_card *, struct qeth_hdr *, + struct sk_buff *); +void qeth_tx_csum(struct sk_buff *skb); + +#endif /* __QETH_CORE_EDDP_H__ */ diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c new file mode 100644 index 0000000..08a50f0 --- /dev/null +++ b/drivers/s390/net/qeth_core_sys.c @@ -0,0 +1,651 @@ +/* + * drivers/s390/net/qeth_core_sys.c + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include + +#include "qeth_core.h" + +static ssize_t qeth_dev_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + + switch (card->state) { + case CARD_STATE_DOWN: + return sprintf(buf, "DOWN\n"); + case CARD_STATE_HARDSETUP: + return sprintf(buf, "HARDSETUP\n"); + case CARD_STATE_SOFTSETUP: + return sprintf(buf, "SOFTSETUP\n"); + case CARD_STATE_UP: + if (card->lan_online) + return sprintf(buf, "UP (LAN ONLINE)\n"); + else + return sprintf(buf, "UP (LAN OFFLINE)\n"); + case CARD_STATE_RECOVER: + return sprintf(buf, "RECOVER\n"); + default: + return sprintf(buf, "UNKNOWN\n"); + } +} + +static DEVICE_ATTR(state, 0444, qeth_dev_state_show, NULL); + +static ssize_t qeth_dev_chpid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + + return sprintf(buf, "%02X\n", card->info.chpid); +} + +static DEVICE_ATTR(chpid, 0444, qeth_dev_chpid_show, NULL); + +static ssize_t qeth_dev_if_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + return sprintf(buf, "%s\n", QETH_CARD_IFNAME(card)); +} + +static DEVICE_ATTR(if_name, 0444, qeth_dev_if_name_show, NULL); + +static ssize_t qeth_dev_card_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + + return sprintf(buf, "%s\n", qeth_get_cardname_short(card)); +} + +static DEVICE_ATTR(card_type, 0444, qeth_dev_card_type_show, NULL); + +static inline const char *qeth_get_bufsize_str(struct qeth_card *card) +{ + if (card->qdio.in_buf_size == 16384) + return "16k"; + else if (card->qdio.in_buf_size == 24576) + return "24k"; + else if (card->qdio.in_buf_size == 32768) + return "32k"; + else if (card->qdio.in_buf_size == 40960) + return "40k"; + else + return "64k"; +} + +static ssize_t qeth_dev_inbuf_size_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + + return sprintf(buf, "%s\n", qeth_get_bufsize_str(card)); +} + +static DEVICE_ATTR(inbuf_size, 0444, qeth_dev_inbuf_size_show, NULL); + +static ssize_t qeth_dev_portno_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->info.portno); +} + +static ssize_t qeth_dev_portno_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + unsigned int portno; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + portno = simple_strtoul(buf, &tmp, 16); + if (portno > QETH_MAX_PORTNO) { + PRINT_WARN("portno 0x%X is out of range\n", portno); + return -EINVAL; + } + + card->info.portno = portno; + return count; +} + +static DEVICE_ATTR(portno, 0644, qeth_dev_portno_show, qeth_dev_portno_store); + +static ssize_t qeth_dev_portname_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char portname[9] = {0, }; + + if (!card) + return -EINVAL; + + if (card->info.portname_required) { + memcpy(portname, card->info.portname + 1, 8); + EBCASC(portname, 8); + return sprintf(buf, "%s\n", portname); + } else + return sprintf(buf, "no portname required\n"); +} + +static ssize_t qeth_dev_portname_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + tmp = strsep((char **) &buf, "\n"); + if ((strlen(tmp) > 8) || (strlen(tmp) == 0)) + return -EINVAL; + + card->info.portname[0] = strlen(tmp); + /* for beauty reasons */ + for (i = 1; i < 9; i++) + card->info.portname[i] = ' '; + strcpy(card->info.portname + 1, tmp); + ASCEBC(card->info.portname + 1, 8); + + return count; +} + +static DEVICE_ATTR(portname, 0644, qeth_dev_portname_show, + qeth_dev_portname_store); + +static ssize_t qeth_dev_prioqing_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + switch (card->qdio.do_prio_queueing) { + case QETH_PRIO_Q_ING_PREC: + return sprintf(buf, "%s\n", "by precedence"); + case QETH_PRIO_Q_ING_TOS: + return sprintf(buf, "%s\n", "by type of service"); + default: + return sprintf(buf, "always queue %i\n", + card->qdio.default_out_queue); + } +} + +static ssize_t qeth_dev_prioqing_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + /* check if 1920 devices are supported , + * if though we have to permit priority queueing + */ + if (card->qdio.no_out_queues == 1) { + PRINT_WARN("Priority queueing disabled due " + "to hardware limitations!\n"); + card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; + return -EPERM; + } + + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "prio_queueing_prec")) + card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_PREC; + else if (!strcmp(tmp, "prio_queueing_tos")) + card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_TOS; + else if (!strcmp(tmp, "no_prio_queueing:0")) { + card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; + card->qdio.default_out_queue = 0; + } else if (!strcmp(tmp, "no_prio_queueing:1")) { + card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; + card->qdio.default_out_queue = 1; + } else if (!strcmp(tmp, "no_prio_queueing:2")) { + card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; + card->qdio.default_out_queue = 2; + } else if (!strcmp(tmp, "no_prio_queueing:3")) { + card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; + card->qdio.default_out_queue = 3; + } else if (!strcmp(tmp, "no_prio_queueing")) { + card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + } else { + PRINT_WARN("Unknown queueing type '%s'\n", tmp); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(priority_queueing, 0644, qeth_dev_prioqing_show, + qeth_dev_prioqing_store); + +static ssize_t qeth_dev_bufcnt_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->qdio.in_buf_pool.buf_count); +} + +static ssize_t qeth_dev_bufcnt_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int cnt, old_cnt; + int rc; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + old_cnt = card->qdio.in_buf_pool.buf_count; + cnt = simple_strtoul(buf, &tmp, 10); + cnt = (cnt < QETH_IN_BUF_COUNT_MIN) ? QETH_IN_BUF_COUNT_MIN : + ((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt); + if (old_cnt != cnt) { + rc = qeth_realloc_buffer_pool(card, cnt); + if (rc) + PRINT_WARN("Error (%d) while setting " + "buffer count.\n", rc); + } + return count; +} + +static DEVICE_ATTR(buffer_count, 0644, qeth_dev_bufcnt_show, + qeth_dev_bufcnt_store); + +static ssize_t qeth_dev_recover_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i; + + if (!card) + return -EINVAL; + + if (card->state != CARD_STATE_UP) + return -EPERM; + + i = simple_strtoul(buf, &tmp, 16); + if (i == 1) + qeth_schedule_recovery(card); + + return count; +} + +static DEVICE_ATTR(recover, 0200, NULL, qeth_dev_recover_store); + +static ssize_t qeth_dev_performance_stats_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->options.performance_stats ? 1:0); +} + +static ssize_t qeth_dev_performance_stats_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i; + + if (!card) + return -EINVAL; + + i = simple_strtoul(buf, &tmp, 16); + if ((i == 0) || (i == 1)) { + if (i == card->options.performance_stats) + return count; + card->options.performance_stats = i; + if (i == 0) + memset(&card->perf_stats, 0, + sizeof(struct qeth_perf_stats)); + card->perf_stats.initial_rx_packets = card->stats.rx_packets; + card->perf_stats.initial_tx_packets = card->stats.tx_packets; + } else { + PRINT_WARN("performance_stats: write 0 or 1 to this file!\n"); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(performance_stats, 0644, qeth_dev_performance_stats_show, + qeth_dev_performance_stats_store); + +static ssize_t qeth_dev_layer2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->options.layer2 ? 1:0); +} + +static ssize_t qeth_dev_layer2_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i, rc; + enum qeth_discipline_id newdis; + + if (!card) + return -EINVAL; + + if (((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER))) + return -EPERM; + + i = simple_strtoul(buf, &tmp, 16); + switch (i) { + case 0: + newdis = QETH_DISCIPLINE_LAYER3; + break; + case 1: + newdis = QETH_DISCIPLINE_LAYER2; + break; + default: + PRINT_WARN("layer2: write 0 or 1 to this file!\n"); + return -EINVAL; + } + + if (card->options.layer2 == newdis) { + return count; + } else { + if (card->discipline.ccwgdriver) { + card->discipline.ccwgdriver->remove(card->gdev); + qeth_core_free_discipline(card); + } + } + + rc = qeth_core_load_discipline(card, newdis); + if (rc) + return rc; + + rc = card->discipline.ccwgdriver->probe(card->gdev); + if (rc) + return rc; + return count; +} + +static DEVICE_ATTR(layer2, 0644, qeth_dev_layer2_show, + qeth_dev_layer2_store); + +static ssize_t qeth_dev_large_send_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + switch (card->options.large_send) { + case QETH_LARGE_SEND_NO: + return sprintf(buf, "%s\n", "no"); + case QETH_LARGE_SEND_EDDP: + return sprintf(buf, "%s\n", "EDDP"); + case QETH_LARGE_SEND_TSO: + return sprintf(buf, "%s\n", "TSO"); + default: + return sprintf(buf, "%s\n", "N/A"); + } +} + +static ssize_t qeth_dev_large_send_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + enum qeth_large_send_types type; + int rc = 0; + char *tmp; + + if (!card) + return -EINVAL; + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "no")) { + type = QETH_LARGE_SEND_NO; + } else if (!strcmp(tmp, "EDDP")) { + type = QETH_LARGE_SEND_EDDP; + } else if (!strcmp(tmp, "TSO")) { + type = QETH_LARGE_SEND_TSO; + } else { + PRINT_WARN("large_send: invalid mode %s!\n", tmp); + return -EINVAL; + } + if (card->options.large_send == type) + return count; + rc = qeth_set_large_send(card, type); + if (rc) + return rc; + return count; +} + +static DEVICE_ATTR(large_send, 0644, qeth_dev_large_send_show, + qeth_dev_large_send_store); + +static ssize_t qeth_dev_blkt_show(char *buf, struct qeth_card *card, int value) +{ + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", value); +} + +static ssize_t qeth_dev_blkt_store(struct qeth_card *card, + const char *buf, size_t count, int *value, int max_value) +{ + char *tmp; + int i; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + i = simple_strtoul(buf, &tmp, 10); + if (i <= max_value) { + *value = i; + } else { + PRINT_WARN("blkt total time: write values between" + " 0 and %d to this file!\n", max_value); + return -EINVAL; + } + return count; +} + +static ssize_t qeth_dev_blkt_total_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_show(buf, card, card->info.blkt.time_total); +} + +static ssize_t qeth_dev_blkt_total_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_store(card, buf, count, + &card->info.blkt.time_total, 1000); +} + + + +static DEVICE_ATTR(total, 0644, qeth_dev_blkt_total_show, + qeth_dev_blkt_total_store); + +static ssize_t qeth_dev_blkt_inter_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_show(buf, card, card->info.blkt.inter_packet); +} + +static ssize_t qeth_dev_blkt_inter_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_store(card, buf, count, + &card->info.blkt.inter_packet, 100); +} + +static DEVICE_ATTR(inter, 0644, qeth_dev_blkt_inter_show, + qeth_dev_blkt_inter_store); + +static ssize_t qeth_dev_blkt_inter_jumbo_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_show(buf, card, + card->info.blkt.inter_packet_jumbo); +} + +static ssize_t qeth_dev_blkt_inter_jumbo_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + return qeth_dev_blkt_store(card, buf, count, + &card->info.blkt.inter_packet_jumbo, 100); +} + +static DEVICE_ATTR(inter_jumbo, 0644, qeth_dev_blkt_inter_jumbo_show, + qeth_dev_blkt_inter_jumbo_store); + +static struct attribute *qeth_blkt_device_attrs[] = { + &dev_attr_total.attr, + &dev_attr_inter.attr, + &dev_attr_inter_jumbo.attr, + NULL, +}; + +static struct attribute_group qeth_device_blkt_group = { + .name = "blkt", + .attrs = qeth_blkt_device_attrs, +}; + +static struct attribute *qeth_device_attrs[] = { + &dev_attr_state.attr, + &dev_attr_chpid.attr, + &dev_attr_if_name.attr, + &dev_attr_card_type.attr, + &dev_attr_inbuf_size.attr, + &dev_attr_portno.attr, + &dev_attr_portname.attr, + &dev_attr_priority_queueing.attr, + &dev_attr_buffer_count.attr, + &dev_attr_recover.attr, + &dev_attr_performance_stats.attr, + &dev_attr_layer2.attr, + &dev_attr_large_send.attr, + NULL, +}; + +static struct attribute_group qeth_device_attr_group = { + .attrs = qeth_device_attrs, +}; + +static struct attribute *qeth_osn_device_attrs[] = { + &dev_attr_state.attr, + &dev_attr_chpid.attr, + &dev_attr_if_name.attr, + &dev_attr_card_type.attr, + &dev_attr_buffer_count.attr, + &dev_attr_recover.attr, + NULL, +}; + +static struct attribute_group qeth_osn_device_attr_group = { + .attrs = qeth_osn_device_attrs, +}; + +int qeth_core_create_device_attributes(struct device *dev) +{ + int ret; + ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group); + if (ret) + return ret; + ret = sysfs_create_group(&dev->kobj, &qeth_device_blkt_group); + if (ret) + sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); + + return 0; +} + +void qeth_core_remove_device_attributes(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_blkt_group); +} + +int qeth_core_create_osn_attributes(struct device *dev) +{ + return sysfs_create_group(&dev->kobj, &qeth_osn_device_attr_group); +} + +void qeth_core_remove_osn_attributes(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &qeth_osn_device_attr_group); + return; +} diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c new file mode 100644 index 0000000..4417a36 --- /dev/null +++ b/drivers/s390/net/qeth_l2_main.c @@ -0,0 +1,1242 @@ +/* + * drivers/s390/net/qeth_l2_main.c + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "qeth_core.h" +#include "qeth_core_offl.h" + +#define QETH_DBF_TEXT_(name, level, text...) \ + do { \ + if (qeth_dbf_passes(qeth_dbf_##name, level)) { \ + char *dbf_txt_buf = get_cpu_var(qeth_l2_dbf_txt_buf); \ + sprintf(dbf_txt_buf, text); \ + debug_text_event(qeth_dbf_##name, level, dbf_txt_buf); \ + put_cpu_var(qeth_l2_dbf_txt_buf); \ + } \ + } while (0) + +static DEFINE_PER_CPU(char[256], qeth_l2_dbf_txt_buf); + +static int qeth_l2_set_offline(struct ccwgroup_device *); +static int qeth_l2_stop(struct net_device *); +static int qeth_l2_send_delmac(struct qeth_card *, __u8 *); +static int qeth_l2_send_setdelmac(struct qeth_card *, __u8 *, + enum qeth_ipa_cmds, + int (*reply_cb) (struct qeth_card *, + struct qeth_reply*, + unsigned long)); +static void qeth_l2_set_multicast_list(struct net_device *); +static int qeth_l2_recover(void *); + +static int qeth_l2_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct qeth_card *card = netdev_priv(dev); + struct mii_ioctl_data *mii_data; + int rc = 0; + + if (!card) + return -ENODEV; + + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_SOFTSETUP)) + return -ENODEV; + + if (card->info.type == QETH_CARD_TYPE_OSN) + return -EPERM; + + switch (cmd) { + case SIOC_QETH_ADP_SET_SNMP_CONTROL: + rc = qeth_snmp_command(card, rq->ifr_ifru.ifru_data); + break; + case SIOC_QETH_GET_CARD_TYPE: + if ((card->info.type == QETH_CARD_TYPE_OSAE) && + !card->info.guestlan) + return 1; + return 0; + break; + case SIOCGMIIPHY: + mii_data = if_mii(rq); + mii_data->phy_id = 0; + break; + case SIOCGMIIREG: + mii_data = if_mii(rq); + if (mii_data->phy_id != 0) + rc = -EINVAL; + else + mii_data->val_out = qeth_mdio_read(dev, + mii_data->phy_id, mii_data->reg_num); + break; + default: + rc = -EOPNOTSUPP; + } + if (rc) + QETH_DBF_TEXT_(trace, 2, "ioce%d", rc); + return rc; +} + +static int qeth_l2_verify_dev(struct net_device *dev) +{ + struct qeth_card *card; + unsigned long flags; + int rc = 0; + + read_lock_irqsave(&qeth_core_card_list.rwlock, flags); + list_for_each_entry(card, &qeth_core_card_list.list, list) { + if (card->dev == dev) { + rc = QETH_REAL_CARD; + break; + } + } + read_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); + + return rc; +} + +static struct net_device *qeth_l2_netdev_by_devno(unsigned char *read_dev_no) +{ + struct qeth_card *card; + struct net_device *ndev; + unsigned char *readno; + __u16 temp_dev_no, card_dev_no; + char *endp; + unsigned long flags; + + ndev = NULL; + memcpy(&temp_dev_no, read_dev_no, 2); + read_lock_irqsave(&qeth_core_card_list.rwlock, flags); + list_for_each_entry(card, &qeth_core_card_list.list, list) { + readno = CARD_RDEV_ID(card); + readno += (strlen(readno) - 4); + card_dev_no = simple_strtoul(readno, &endp, 16); + if (card_dev_no == temp_dev_no) { + ndev = card->dev; + break; + } + } + read_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); + return ndev; +} + +static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card, + struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + __u8 *mac; + + QETH_DBF_TEXT(trace, 2, "L2Sgmacb"); + cmd = (struct qeth_ipa_cmd *) data; + mac = &cmd->data.setdelmac.mac[0]; + /* MAC already registered, needed in couple/uncouple case */ + if (cmd->hdr.return_code == 0x2005) { + PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \ + "already existing on %s \n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], + QETH_CARD_IFNAME(card)); + cmd->hdr.return_code = 0; + } + if (cmd->hdr.return_code) + PRINT_ERR("Could not set group MAC " \ + "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], + QETH_CARD_IFNAME(card), cmd->hdr.return_code); + return 0; +} + +static int qeth_l2_send_setgroupmac(struct qeth_card *card, __u8 *mac) +{ + QETH_DBF_TEXT(trace, 2, "L2Sgmac"); + return qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETGMAC, + qeth_l2_send_setgroupmac_cb); +} + +static int qeth_l2_send_delgroupmac_cb(struct qeth_card *card, + struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + __u8 *mac; + + QETH_DBF_TEXT(trace, 2, "L2Dgmacb"); + cmd = (struct qeth_ipa_cmd *) data; + mac = &cmd->data.setdelmac.mac[0]; + if (cmd->hdr.return_code) + PRINT_ERR("Could not delete group MAC " \ + "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], + QETH_CARD_IFNAME(card), cmd->hdr.return_code); + return 0; +} + +static int qeth_l2_send_delgroupmac(struct qeth_card *card, __u8 *mac) +{ + QETH_DBF_TEXT(trace, 2, "L2Dgmac"); + return qeth_l2_send_setdelmac(card, mac, IPA_CMD_DELGMAC, + qeth_l2_send_delgroupmac_cb); +} + +static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) +{ + struct qeth_mc_mac *mc; + + mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC); + + if (!mc) { + PRINT_ERR("no mem vor mc mac address\n"); + return; + } + + memcpy(mc->mc_addr, mac, OSA_ADDR_LEN); + mc->mc_addrlen = OSA_ADDR_LEN; + + if (!qeth_l2_send_setgroupmac(card, mac)) + list_add_tail(&mc->list, &card->mc_list); + else + kfree(mc); +} + +static void qeth_l2_del_all_mc(struct qeth_card *card) +{ + struct qeth_mc_mac *mc, *tmp; + + spin_lock_bh(&card->mclock); + list_for_each_entry_safe(mc, tmp, &card->mc_list, list) { + qeth_l2_send_delgroupmac(card, mc->mc_addr); + list_del(&mc->list); + kfree(mc); + } + spin_unlock_bh(&card->mclock); +} + +static void qeth_l2_get_packet_type(struct qeth_card *card, + struct qeth_hdr *hdr, struct sk_buff *skb) +{ + __u16 hdr_mac; + + if (!memcmp(skb->data + QETH_HEADER_SIZE, + skb->dev->broadcast, 6)) { + /* broadcast? */ + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_BROADCAST; + return; + } + hdr_mac = *((__u16 *)skb->data); + /* tr multicast? */ + switch (card->info.link_type) { + case QETH_LINK_TYPE_HSTR: + case QETH_LINK_TYPE_LANE_TR: + if ((hdr_mac == QETH_TR_MAC_NC) || + (hdr_mac == QETH_TR_MAC_C)) + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_MULTICAST; + else + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_UNICAST; + break; + /* eth or so multicast? */ + default: + if ((hdr_mac == QETH_ETH_MAC_V4) || + (hdr_mac == QETH_ETH_MAC_V6)) + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_MULTICAST; + else + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_UNICAST; + } +} + +static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, + struct sk_buff *skb, int ipv, int cast_type) +{ + struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) + + QETH_HEADER_SIZE); + + memset(hdr, 0, sizeof(struct qeth_hdr)); + hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2; + + /* set byte byte 3 to casting flags */ + if (cast_type == RTN_MULTICAST) + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_MULTICAST; + else if (cast_type == RTN_BROADCAST) + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_BROADCAST; + else + qeth_l2_get_packet_type(card, hdr, skb); + + hdr->hdr.l2.pkt_length = skb->len-QETH_HEADER_SIZE; + /* VSWITCH relies on the VLAN + * information to be present in + * the QDIO header */ + if (veth->h_vlan_proto == __constant_htons(ETH_P_8021Q)) { + hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_VLAN; + hdr->hdr.l2.vlan_id = ntohs(veth->h_vlan_TCI); + } +} + +static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 2, "L2sdvcb"); + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code) { + PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. " + "Continuing\n", cmd->data.setdelvlan.vlan_id, + QETH_CARD_IFNAME(card), cmd->hdr.return_code); + QETH_DBF_TEXT_(trace, 2, "L2VL%4x", cmd->hdr.command); + QETH_DBF_TEXT_(trace, 2, "L2%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code); + } + return 0; +} + +static int qeth_l2_send_setdelvlan(struct qeth_card *card, __u16 i, + enum qeth_ipa_cmds ipacmd) +{ + struct qeth_ipa_cmd *cmd; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT_(trace, 4, "L2sdv%x", ipacmd); + iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setdelvlan.vlan_id = i; + return qeth_send_ipa_cmd(card, iob, + qeth_l2_send_setdelvlan_cb, NULL); +} + +static void qeth_l2_process_vlans(struct qeth_card *card, int clear) +{ + struct qeth_vlan_vid *id; + QETH_DBF_TEXT(trace, 3, "L2prcvln"); + spin_lock_bh(&card->vlanlock); + list_for_each_entry(id, &card->vid_list, list) { + if (clear) + qeth_l2_send_setdelvlan(card, id->vid, + IPA_CMD_DELVLAN); + else + qeth_l2_send_setdelvlan(card, id->vid, + IPA_CMD_SETVLAN); + } + spin_unlock_bh(&card->vlanlock); +} + +static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct qeth_card *card = netdev_priv(dev); + struct qeth_vlan_vid *id; + + QETH_DBF_TEXT_(trace, 4, "aid:%d", vid); + id = kmalloc(sizeof(struct qeth_vlan_vid), GFP_ATOMIC); + if (id) { + id->vid = vid; + qeth_l2_send_setdelvlan(card, vid, IPA_CMD_SETVLAN); + spin_lock_bh(&card->vlanlock); + list_add_tail(&id->list, &card->vid_list); + spin_unlock_bh(&card->vlanlock); + } else { + PRINT_ERR("no memory for vid\n"); + } +} + +static void qeth_l2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct qeth_vlan_vid *id, *tmpid = NULL; + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT_(trace, 4, "kid:%d", vid); + spin_lock_bh(&card->vlanlock); + list_for_each_entry(id, &card->vid_list, list) { + if (id->vid == vid) { + list_del(&id->list); + tmpid = id; + break; + } + } + spin_unlock_bh(&card->vlanlock); + if (tmpid) { + qeth_l2_send_setdelvlan(card, vid, IPA_CMD_DELVLAN); + kfree(tmpid); + } + qeth_l2_set_multicast_list(card->dev); +} + +static int qeth_l2_stop_card(struct qeth_card *card, int recovery_mode) +{ + int rc = 0; + + QETH_DBF_TEXT(setup , 2, "stopcard"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + + qeth_set_allowed_threads(card, 0, 1); + if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) + return -ERESTARTSYS; + if (card->read.state == CH_STATE_UP && + card->write.state == CH_STATE_UP && + (card->state == CARD_STATE_UP)) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { + qeth_l2_stop(card->dev); + } else { + rtnl_lock(); + dev_close(card->dev); + rtnl_unlock(); + } + if (!card->use_hard_stop) { + __u8 *mac = &card->dev->dev_addr[0]; + rc = qeth_l2_send_delmac(card, mac); + QETH_DBF_TEXT_(setup, 2, "Lerr%d", rc); + } + card->state = CARD_STATE_SOFTSETUP; + } + if (card->state == CARD_STATE_SOFTSETUP) { + qeth_l2_process_vlans(card, 1); + qeth_l2_del_all_mc(card); + qeth_clear_ipacmd_list(card); + card->state = CARD_STATE_HARDSETUP; + } + if (card->state == CARD_STATE_HARDSETUP) { + qeth_qdio_clear_card(card, 0); + qeth_clear_qdio_buffers(card); + qeth_clear_working_pool_list(card); + card->state = CARD_STATE_DOWN; + } + if (card->state == CARD_STATE_DOWN) { + qeth_clear_cmd_buffers(&card->read); + qeth_clear_cmd_buffers(&card->write); + } + card->use_hard_stop = 0; + return rc; +} + +static void qeth_l2_process_inbound_buffer(struct qeth_card *card, + struct qeth_qdio_buffer *buf, int index) +{ + struct qdio_buffer_element *element; + struct sk_buff *skb; + struct qeth_hdr *hdr; + int offset; + unsigned int len; + + /* get first element of current buffer */ + element = (struct qdio_buffer_element *)&buf->buffer->element[0]; + offset = 0; + if (card->options.performance_stats) + card->perf_stats.bufs_rec++; + while ((skb = qeth_core_get_next_skb(card, buf->buffer, &element, + &offset, &hdr))) { + skb->dev = card->dev; + /* is device UP ? */ + if (!(card->dev->flags & IFF_UP)) { + dev_kfree_skb_any(skb); + continue; + } + + switch (hdr->hdr.l2.id) { + case QETH_HEADER_TYPE_LAYER2: + skb->pkt_type = PACKET_HOST; + skb->protocol = eth_type_trans(skb, skb->dev); + if (card->options.checksum_type == NO_CHECKSUMMING) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; + *((__u32 *)skb->cb) = ++card->seqno.pkt_seqno; + len = skb->len; + netif_rx(skb); + break; + case QETH_HEADER_TYPE_OSN: + skb_push(skb, sizeof(struct qeth_hdr)); + skb_copy_to_linear_data(skb, hdr, + sizeof(struct qeth_hdr)); + len = skb->len; + card->osn_info.data_cb(skb); + break; + default: + dev_kfree_skb_any(skb); + QETH_DBF_TEXT(trace, 3, "inbunkno"); + QETH_DBF_HEX(control, 3, hdr, QETH_DBF_CONTROL_LEN); + continue; + } + card->dev->last_rx = jiffies; + card->stats.rx_packets++; + card->stats.rx_bytes += len; + } +} + +static int qeth_l2_send_setdelmac(struct qeth_card *card, __u8 *mac, + enum qeth_ipa_cmds ipacmd, + int (*reply_cb) (struct qeth_card *, + struct qeth_reply*, + unsigned long)) +{ + struct qeth_ipa_cmd *cmd; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 2, "L2sdmac"); + iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setdelmac.mac_length = OSA_ADDR_LEN; + memcpy(&cmd->data.setdelmac.mac, mac, OSA_ADDR_LEN); + return qeth_send_ipa_cmd(card, iob, reply_cb, NULL); +} + +static int qeth_l2_send_setmac_cb(struct qeth_card *card, + struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 2, "L2Smaccb"); + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code) { + QETH_DBF_TEXT_(trace, 2, "L2er%x", cmd->hdr.return_code); + card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; + cmd->hdr.return_code = -EIO; + } else { + card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED; + memcpy(card->dev->dev_addr, cmd->data.setdelmac.mac, + OSA_ADDR_LEN); + PRINT_INFO("MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " + "successfully registered on device %s\n", + card->dev->dev_addr[0], card->dev->dev_addr[1], + card->dev->dev_addr[2], card->dev->dev_addr[3], + card->dev->dev_addr[4], card->dev->dev_addr[5], + card->dev->name); + } + return 0; +} + +static int qeth_l2_send_setmac(struct qeth_card *card, __u8 *mac) +{ + QETH_DBF_TEXT(trace, 2, "L2Setmac"); + return qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC, + qeth_l2_send_setmac_cb); +} + +static int qeth_l2_send_delmac_cb(struct qeth_card *card, + struct qeth_reply *reply, + unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 2, "L2Dmaccb"); + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code) { + QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code); + cmd->hdr.return_code = -EIO; + return 0; + } + card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; + + return 0; +} + +static int qeth_l2_send_delmac(struct qeth_card *card, __u8 *mac) +{ + QETH_DBF_TEXT(trace, 2, "L2Delmac"); + if (!(card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED)) + return 0; + return qeth_l2_send_setdelmac(card, mac, IPA_CMD_DELVMAC, + qeth_l2_send_delmac_cb); +} + +static int qeth_l2_request_initial_mac(struct qeth_card *card) +{ + int rc = 0; + char vendor_pre[] = {0x02, 0x00, 0x00}; + + QETH_DBF_TEXT(setup, 2, "doL2init"); + QETH_DBF_TEXT_(setup, 2, "doL2%s", CARD_BUS_ID(card)); + + rc = qeth_query_setadapterparms(card); + if (rc) { + PRINT_WARN("could not query adapter parameters on device %s: " + "x%x\n", CARD_BUS_ID(card), rc); + } + + if (card->info.guestlan) { + rc = qeth_setadpparms_change_macaddr(card); + if (rc) { + PRINT_WARN("couldn't get MAC address on " + "device %s: x%x\n", + CARD_BUS_ID(card), rc); + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return rc; + } + QETH_DBF_HEX(setup, 2, card->dev->dev_addr, OSA_ADDR_LEN); + } else { + random_ether_addr(card->dev->dev_addr); + memcpy(card->dev->dev_addr, vendor_pre, 3); + } + return 0; +} + +static int qeth_l2_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct qeth_card *card = netdev_priv(dev); + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "setmac"); + + if (qeth_l2_verify_dev(dev) != QETH_REAL_CARD) { + QETH_DBF_TEXT(trace, 3, "setmcINV"); + return -EOPNOTSUPP; + } + + if (card->info.type == QETH_CARD_TYPE_OSN) { + PRINT_WARN("Setting MAC address on %s is not supported.\n", + dev->name); + QETH_DBF_TEXT(trace, 3, "setmcOSN"); + return -EOPNOTSUPP; + } + QETH_DBF_TEXT_(trace, 3, "%s", CARD_BUS_ID(card)); + QETH_DBF_HEX(trace, 3, addr->sa_data, OSA_ADDR_LEN); + rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]); + if (!rc) + rc = qeth_l2_send_setmac(card, addr->sa_data); + return rc; +} + +static void qeth_l2_set_multicast_list(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + struct dev_mc_list *dm; + + if (card->info.type == QETH_CARD_TYPE_OSN) + return ; + + QETH_DBF_TEXT(trace, 3, "setmulti"); + qeth_l2_del_all_mc(card); + spin_lock_bh(&card->mclock); + for (dm = dev->mc_list; dm; dm = dm->next) + qeth_l2_add_mc(card, dm->dmi_addr); + spin_unlock_bh(&card->mclock); + if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) + return; + qeth_setadp_promisc_mode(card); +} + +static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + int rc; + struct qeth_hdr *hdr = NULL; + int elements = 0; + struct qeth_card *card = netdev_priv(dev); + struct sk_buff *new_skb = skb; + int ipv = qeth_get_ip_version(skb); + int cast_type = qeth_get_cast_type(card, skb); + struct qeth_qdio_out_q *queue = card->qdio.out_qs + [qeth_get_priority_queue(card, skb, ipv, cast_type)]; + int tx_bytes = skb->len; + enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; + struct qeth_eddp_context *ctx = NULL; + + QETH_DBF_TEXT(trace, 6, "l2xmit"); + + if ((card->state != CARD_STATE_UP) || !card->lan_online) { + card->stats.tx_carrier_errors++; + goto tx_drop; + } + + if ((card->info.type == QETH_CARD_TYPE_OSN) && + (skb->protocol == htons(ETH_P_IPV6))) + goto tx_drop; + + if (card->options.performance_stats) { + card->perf_stats.outbound_cnt++; + card->perf_stats.outbound_start_time = qeth_get_micros(); + } + netif_stop_queue(dev); + + if (skb_is_gso(skb)) + large_send = QETH_LARGE_SEND_EDDP; + + if (card->info.type == QETH_CARD_TYPE_OSN) + hdr = (struct qeth_hdr *)skb->data; + else { + new_skb = qeth_prepare_skb(card, skb, &hdr); + if (!new_skb) + goto tx_drop; + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + } + + if (large_send == QETH_LARGE_SEND_EDDP) { + ctx = qeth_eddp_create_context(card, new_skb, hdr, + skb->sk->sk_protocol); + if (ctx == NULL) { + PRINT_WARN("could not create eddp context\n"); + goto tx_drop; + } + } else { + elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0); + if (!elements) + goto tx_drop; + } + + if ((large_send == QETH_LARGE_SEND_NO) && + (skb->ip_summed == CHECKSUM_PARTIAL)) + qeth_tx_csum(new_skb); + + if (card->info.type != QETH_CARD_TYPE_IQD) + rc = qeth_do_send_packet(card, queue, new_skb, hdr, + elements, ctx); + else + rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, + elements, ctx); + if (!rc) { + card->stats.tx_packets++; + card->stats.tx_bytes += tx_bytes; + if (new_skb != skb) + dev_kfree_skb_any(skb); + if (card->options.performance_stats) { + if (large_send != QETH_LARGE_SEND_NO) { + card->perf_stats.large_send_bytes += tx_bytes; + card->perf_stats.large_send_cnt++; + } + if (skb_shinfo(new_skb)->nr_frags > 0) { + card->perf_stats.sg_skbs_sent++; + /* nr_frags + skb->data */ + card->perf_stats.sg_frags_sent += + skb_shinfo(new_skb)->nr_frags + 1; + } + } + + if (ctx != NULL) { + qeth_eddp_put_context(ctx); + dev_kfree_skb_any(new_skb); + } + } else { + if (ctx != NULL) + qeth_eddp_put_context(ctx); + + if (rc == -EBUSY) { + if (new_skb != skb) + dev_kfree_skb_any(new_skb); + return NETDEV_TX_BUSY; + } else + goto tx_drop; + } + + netif_wake_queue(dev); + if (card->options.performance_stats) + card->perf_stats.outbound_time += qeth_get_micros() - + card->perf_stats.outbound_start_time; + return rc; + +tx_drop: + card->stats.tx_dropped++; + card->stats.tx_errors++; + if ((new_skb != skb) && new_skb) + dev_kfree_skb_any(new_skb); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static void qeth_l2_qdio_input_handler(struct ccw_device *ccwdev, + unsigned int status, unsigned int qdio_err, + unsigned int siga_err, unsigned int queue, + int first_element, int count, unsigned long card_ptr) +{ + struct net_device *net_dev; + struct qeth_card *card; + struct qeth_qdio_buffer *buffer; + int index; + int i; + + QETH_DBF_TEXT(trace, 6, "qdinput"); + card = (struct qeth_card *) card_ptr; + net_dev = card->dev; + if (card->options.performance_stats) { + card->perf_stats.inbound_cnt++; + card->perf_stats.inbound_start_time = qeth_get_micros(); + } + if (status & QDIO_STATUS_LOOK_FOR_ERROR) { + if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(trace, 1, "qdinchk"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(trace, 1, "%04X%04X", first_element, + count); + QETH_DBF_TEXT_(trace, 1, "%04X%04X", queue, status); + qeth_schedule_recovery(card); + return; + } + } + for (i = first_element; i < (first_element + count); ++i) { + index = i % QDIO_MAX_BUFFERS_PER_Q; + buffer = &card->qdio.in_q->bufs[index]; + if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && + qeth_check_qdio_errors(buffer->buffer, + qdio_err, siga_err, "qinerr"))) + qeth_l2_process_inbound_buffer(card, buffer, index); + /* clear buffer and give back to hardware */ + qeth_put_buffer_pool_entry(card, buffer->pool_entry); + qeth_queue_input_buffer(card, index); + } + if (card->options.performance_stats) + card->perf_stats.inbound_time += qeth_get_micros() - + card->perf_stats.inbound_start_time; +} + +static int qeth_l2_open(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 4, "qethopen"); + if (card->state != CARD_STATE_SOFTSETUP) + return -ENODEV; + + if ((card->info.type != QETH_CARD_TYPE_OSN) && + (!(card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED))) { + QETH_DBF_TEXT(trace, 4, "nomacadr"); + return -EPERM; + } + card->data.state = CH_STATE_UP; + card->state = CARD_STATE_UP; + card->dev->flags |= IFF_UP; + netif_start_queue(dev); + + if (!card->lan_online && netif_carrier_ok(dev)) + netif_carrier_off(dev); + return 0; +} + + +static int qeth_l2_stop(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 4, "qethstop"); + netif_tx_disable(dev); + card->dev->flags &= ~IFF_UP; + if (card->state == CARD_STATE_UP) + card->state = CARD_STATE_SOFTSETUP; + return 0; +} + +static int qeth_l2_probe_device(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + + INIT_LIST_HEAD(&card->vid_list); + INIT_LIST_HEAD(&card->mc_list); + card->options.layer2 = 1; + card->discipline.input_handler = (qdio_handler_t *) + qeth_l2_qdio_input_handler; + card->discipline.output_handler = (qdio_handler_t *) + qeth_qdio_output_handler; + card->discipline.recover = qeth_l2_recover; + return 0; +} + +static void qeth_l2_remove_device(struct ccwgroup_device *cgdev) +{ + struct qeth_card *card = dev_get_drvdata(&cgdev->dev); + + wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0); + + if (cgdev->state == CCWGROUP_ONLINE) { + card->use_hard_stop = 1; + qeth_l2_set_offline(cgdev); + } + + if (card->dev) { + unregister_netdev(card->dev); + card->dev = NULL; + } + + qeth_l2_del_all_mc(card); + return; +} + +static struct ethtool_ops qeth_l2_ethtool_ops = { + .get_link = ethtool_op_get_link, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_strings = qeth_core_get_strings, + .get_ethtool_stats = qeth_core_get_ethtool_stats, + .get_stats_count = qeth_core_get_stats_count, + .get_drvinfo = qeth_core_get_drvinfo, +}; + +static struct ethtool_ops qeth_l2_osn_ops = { + .get_strings = qeth_core_get_strings, + .get_ethtool_stats = qeth_core_get_ethtool_stats, + .get_stats_count = qeth_core_get_stats_count, + .get_drvinfo = qeth_core_get_drvinfo, +}; + +static int qeth_l2_setup_netdev(struct qeth_card *card) +{ + switch (card->info.type) { + case QETH_CARD_TYPE_OSAE: + card->dev = alloc_etherdev(0); + break; + case QETH_CARD_TYPE_IQD: + card->dev = alloc_netdev(0, "hsi%d", ether_setup); + break; + case QETH_CARD_TYPE_OSN: + card->dev = alloc_netdev(0, "osn%d", ether_setup); + card->dev->flags |= IFF_NOARP; + break; + default: + card->dev = alloc_etherdev(0); + } + + if (!card->dev) + return -ENODEV; + + card->dev->priv = card; + card->dev->tx_timeout = &qeth_tx_timeout; + card->dev->watchdog_timeo = QETH_TX_TIMEOUT; + card->dev->open = qeth_l2_open; + card->dev->stop = qeth_l2_stop; + card->dev->hard_start_xmit = qeth_l2_hard_start_xmit; + card->dev->do_ioctl = qeth_l2_do_ioctl; + card->dev->get_stats = qeth_get_stats; + card->dev->change_mtu = qeth_change_mtu; + card->dev->set_multicast_list = qeth_l2_set_multicast_list; + card->dev->vlan_rx_kill_vid = qeth_l2_vlan_rx_kill_vid; + card->dev->vlan_rx_add_vid = qeth_l2_vlan_rx_add_vid; + card->dev->set_mac_address = qeth_l2_set_mac_address; + card->dev->mtu = card->info.initial_mtu; + if (card->info.type != QETH_CARD_TYPE_OSN) + SET_ETHTOOL_OPS(card->dev, &qeth_l2_ethtool_ops); + else + SET_ETHTOOL_OPS(card->dev, &qeth_l2_osn_ops); + card->dev->features |= NETIF_F_HW_VLAN_FILTER; + card->info.broadcast_capable = 1; + qeth_l2_request_initial_mac(card); + SET_NETDEV_DEV(card->dev, &card->gdev->dev); + return register_netdev(card->dev); +} + +static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + int rc = 0; + enum qeth_card_states recover_flag; + + BUG_ON(!card); + QETH_DBF_TEXT(setup, 2, "setonlin"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + + qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); + if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { + PRINT_WARN("set_online of card %s interrupted by user!\n", + CARD_BUS_ID(card)); + return -ERESTARTSYS; + } + + recover_flag = card->state; + rc = ccw_device_set_online(CARD_RDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + rc = ccw_device_set_online(CARD_WDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + rc = ccw_device_set_online(CARD_DDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + + rc = qeth_core_hardsetup_card(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + goto out_remove; + } + + if (!card->dev && qeth_l2_setup_netdev(card)) + goto out_remove; + + if (card->info.type != QETH_CARD_TYPE_OSN) + qeth_l2_send_setmac(card, &card->dev->dev_addr[0]); + + card->state = CARD_STATE_HARDSETUP; + qeth_print_status_message(card); + + /* softsetup */ + QETH_DBF_TEXT(setup, 2, "softsetp"); + + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + if (rc == 0xe080) { + PRINT_WARN("LAN on card %s if offline! " + "Waiting for STARTLAN from card.\n", + CARD_BUS_ID(card)); + card->lan_online = 0; + } + return rc; + } else + card->lan_online = 1; + + if (card->info.type != QETH_CARD_TYPE_OSN) { + qeth_set_large_send(card, card->options.large_send); + qeth_l2_process_vlans(card, 0); + } + + netif_tx_disable(card->dev); + + rc = qeth_init_qdio_queues(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "6err%d", rc); + goto out_remove; + } + card->state = CARD_STATE_SOFTSETUP; + netif_carrier_on(card->dev); + + qeth_set_allowed_threads(card, 0xffffffff, 0); + if (recover_flag == CARD_STATE_RECOVER) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { + qeth_l2_open(card->dev); + } else { + rtnl_lock(); + dev_open(card->dev); + rtnl_unlock(); + } + /* this also sets saved unicast addresses */ + qeth_l2_set_multicast_list(card->dev); + } + /* let user_space know that device is online */ + kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE); + return 0; +out_remove: + card->use_hard_stop = 1; + qeth_l2_stop_card(card, 0); + ccw_device_set_offline(CARD_DDEV(card)); + ccw_device_set_offline(CARD_WDEV(card)); + ccw_device_set_offline(CARD_RDEV(card)); + if (recover_flag == CARD_STATE_RECOVER) + card->state = CARD_STATE_RECOVER; + else + card->state = CARD_STATE_DOWN; + return -ENODEV; +} + +static int qeth_l2_set_online(struct ccwgroup_device *gdev) +{ + return __qeth_l2_set_online(gdev, 0); +} + +static int __qeth_l2_set_offline(struct ccwgroup_device *cgdev, + int recovery_mode) +{ + struct qeth_card *card = dev_get_drvdata(&cgdev->dev); + int rc = 0, rc2 = 0, rc3 = 0; + enum qeth_card_states recover_flag; + + QETH_DBF_TEXT(setup, 3, "setoffl"); + QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); + + if (card->dev && netif_carrier_ok(card->dev)) + netif_carrier_off(card->dev); + recover_flag = card->state; + if (qeth_l2_stop_card(card, recovery_mode) == -ERESTARTSYS) { + PRINT_WARN("Stopping card %s interrupted by user!\n", + CARD_BUS_ID(card)); + return -ERESTARTSYS; + } + rc = ccw_device_set_offline(CARD_DDEV(card)); + rc2 = ccw_device_set_offline(CARD_WDEV(card)); + rc3 = ccw_device_set_offline(CARD_RDEV(card)); + if (!rc) + rc = (rc2) ? rc2 : rc3; + if (rc) + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + if (recover_flag == CARD_STATE_UP) + card->state = CARD_STATE_RECOVER; + /* let user_space know that device is offline */ + kobject_uevent(&cgdev->dev.kobj, KOBJ_CHANGE); + return 0; +} + +static int qeth_l2_set_offline(struct ccwgroup_device *cgdev) +{ + return __qeth_l2_set_offline(cgdev, 0); +} + +static int qeth_l2_recover(void *ptr) +{ + struct qeth_card *card; + int rc = 0; + + card = (struct qeth_card *) ptr; + QETH_DBF_TEXT(trace, 2, "recover1"); + QETH_DBF_HEX(trace, 2, &card, sizeof(void *)); + if (!qeth_do_run_thread(card, QETH_RECOVER_THREAD)) + return 0; + QETH_DBF_TEXT(trace, 2, "recover2"); + PRINT_WARN("Recovery of device %s started ...\n", + CARD_BUS_ID(card)); + card->use_hard_stop = 1; + __qeth_l2_set_offline(card->gdev, 1); + rc = __qeth_l2_set_online(card->gdev, 1); + /* don't run another scheduled recovery */ + qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); + qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); + if (!rc) + PRINT_INFO("Device %s successfully recovered!\n", + CARD_BUS_ID(card)); + else + PRINT_INFO("Device %s could not be recovered!\n", + CARD_BUS_ID(card)); + return 0; +} + +static int __init qeth_l2_init(void) +{ + PRINT_INFO("register layer 2 discipline\n"); + return 0; +} + +static void __exit qeth_l2_exit(void) +{ + PRINT_INFO("unregister layer 2 discipline\n"); +} + +static void qeth_l2_shutdown(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + qeth_qdio_clear_card(card, 0); + qeth_clear_qdio_buffers(card); +} + +struct ccwgroup_driver qeth_l2_ccwgroup_driver = { + .probe = qeth_l2_probe_device, + .remove = qeth_l2_remove_device, + .set_online = qeth_l2_set_online, + .set_offline = qeth_l2_set_offline, + .shutdown = qeth_l2_shutdown, +}; +EXPORT_SYMBOL_GPL(qeth_l2_ccwgroup_driver); + +static int qeth_osn_send_control_data(struct qeth_card *card, int len, + struct qeth_cmd_buffer *iob) +{ + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 5, "osndctrd"); + + wait_event(card->wait_q, + atomic_cmpxchg(&card->write.irq_pending, 0, 1) == 0); + qeth_prepare_control_data(card, len, iob); + QETH_DBF_TEXT(trace, 6, "osnoirqp"); + spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); + rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, + (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); + if (rc) { + PRINT_WARN("qeth_osn_send_control_data: " + "ccw_device_start rc = %i\n", rc); + QETH_DBF_TEXT_(trace, 2, " err%d", rc); + qeth_release_buffer(iob->channel, iob); + atomic_set(&card->write.irq_pending, 0); + wake_up(&card->wait_q); + } + return rc; +} + +static int qeth_osn_send_ipa_cmd(struct qeth_card *card, + struct qeth_cmd_buffer *iob, int data_len) +{ + u16 s1, s2; + + QETH_DBF_TEXT(trace, 4, "osndipa"); + + qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2); + s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len); + s2 = (u16)data_len; + memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); + memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); + return qeth_osn_send_control_data(card, s1, iob); +} + +int qeth_osn_assist(struct net_device *dev, void *data, int data_len) +{ + struct qeth_cmd_buffer *iob; + struct qeth_card *card; + int rc; + + QETH_DBF_TEXT(trace, 2, "osnsdmc"); + if (!dev) + return -ENODEV; + card = netdev_priv(dev); + if (!card) + return -ENODEV; + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_SOFTSETUP)) + return -ENODEV; + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data+IPA_PDU_HEADER_SIZE, data, data_len); + rc = qeth_osn_send_ipa_cmd(card, iob, data_len); + return rc; +} +EXPORT_SYMBOL(qeth_osn_assist); + +int qeth_osn_register(unsigned char *read_dev_no, struct net_device **dev, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 2, "osnreg"); + *dev = qeth_l2_netdev_by_devno(read_dev_no); + if (*dev == NULL) + return -ENODEV; + card = netdev_priv(*dev); + if (!card) + return -ENODEV; + if ((assist_cb == NULL) || (data_cb == NULL)) + return -EINVAL; + card->osn_info.assist_cb = assist_cb; + card->osn_info.data_cb = data_cb; + return 0; +} +EXPORT_SYMBOL(qeth_osn_register); + +void qeth_osn_deregister(struct net_device *dev) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 2, "osndereg"); + if (!dev) + return; + card = netdev_priv(dev); + if (!card) + return; + card->osn_info.assist_cb = NULL; + card->osn_info.data_cb = NULL; + return; +} +EXPORT_SYMBOL(qeth_osn_deregister); + +module_init(qeth_l2_init); +module_exit(qeth_l2_exit); +MODULE_AUTHOR("Frank Blaschka "); +MODULE_DESCRIPTION("qeth layer 2 discipline"); +MODULE_LICENSE("GPL"); diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h new file mode 100644 index 0000000..f639cc3 --- /dev/null +++ b/drivers/s390/net/qeth_l3.h @@ -0,0 +1,76 @@ +/* + * drivers/s390/net/qeth_l3.h + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#ifndef __QETH_L3_H__ +#define __QETH_L3_H__ + +#include "qeth_core.h" + +#define QETH_DBF_TEXT_(name, level, text...) \ + do { \ + if (qeth_dbf_passes(qeth_dbf_##name, level)) { \ + char *dbf_txt_buf = get_cpu_var(qeth_l3_dbf_txt_buf); \ + sprintf(dbf_txt_buf, text); \ + debug_text_event(qeth_dbf_##name, level, dbf_txt_buf); \ + put_cpu_var(qeth_l3_dbf_txt_buf); \ + } \ + } while (0) + +DECLARE_PER_CPU(char[256], qeth_l3_dbf_txt_buf); + +struct qeth_ipaddr { + struct list_head entry; + enum qeth_ip_types type; + enum qeth_ipa_setdelip_flags set_flags; + enum qeth_ipa_setdelip_flags del_flags; + int is_multicast; + int users; + enum qeth_prot_versions proto; + unsigned char mac[OSA_ADDR_LEN]; + union { + struct { + unsigned int addr; + unsigned int mask; + } a4; + struct { + struct in6_addr addr; + unsigned int pfxlen; + } a6; + } u; +}; + +struct qeth_ipato_entry { + struct list_head entry; + enum qeth_prot_versions proto; + char addr[16]; + int mask_bits; +}; + + +void qeth_l3_ipaddr4_to_string(const __u8 *, char *); +int qeth_l3_string_to_ipaddr4(const char *, __u8 *); +void qeth_l3_ipaddr6_to_string(const __u8 *, char *); +int qeth_l3_string_to_ipaddr6(const char *, __u8 *); +void qeth_l3_ipaddr_to_string(enum qeth_prot_versions, const __u8 *, char *); +int qeth_l3_string_to_ipaddr(const char *, enum qeth_prot_versions, __u8 *); +int qeth_l3_create_device_attributes(struct device *); +void qeth_l3_remove_device_attributes(struct device *); +int qeth_l3_setrouting_v4(struct qeth_card *); +int qeth_l3_setrouting_v6(struct qeth_card *); +int qeth_l3_add_ipato_entry(struct qeth_card *, struct qeth_ipato_entry *); +void qeth_l3_del_ipato_entry(struct qeth_card *, enum qeth_prot_versions, + u8 *, int); +int qeth_l3_add_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *); +void qeth_l3_del_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *); +int qeth_l3_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *); +void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions, + const u8 *); + +#endif /* __QETH_L3_H__ */ diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c new file mode 100644 index 0000000..cfa199a --- /dev/null +++ b/drivers/s390/net/qeth_l3_main.c @@ -0,0 +1,3388 @@ +/* + * drivers/s390/net/qeth_l3_main.c + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "qeth_l3.h" +#include "qeth_core_offl.h" + +DEFINE_PER_CPU(char[256], qeth_l3_dbf_txt_buf); + +static int qeth_l3_set_offline(struct ccwgroup_device *); +static int qeth_l3_recover(void *); +static int qeth_l3_stop(struct net_device *); +static void qeth_l3_set_multicast_list(struct net_device *); +static int qeth_l3_neigh_setup(struct net_device *, struct neigh_parms *); +static int qeth_l3_register_addr_entry(struct qeth_card *, + struct qeth_ipaddr *); +static int qeth_l3_deregister_addr_entry(struct qeth_card *, + struct qeth_ipaddr *); +static int __qeth_l3_set_online(struct ccwgroup_device *, int); +static int __qeth_l3_set_offline(struct ccwgroup_device *, int); + + +static int qeth_l3_isxdigit(char *buf) +{ + while (*buf) { + if (!isxdigit(*buf++)) + return 0; + } + return 1; +} + +void qeth_l3_ipaddr4_to_string(const __u8 *addr, char *buf) +{ + sprintf(buf, "%i.%i.%i.%i", addr[0], addr[1], addr[2], addr[3]); +} + +int qeth_l3_string_to_ipaddr4(const char *buf, __u8 *addr) +{ + int count = 0, rc = 0; + int in[4]; + char c; + + rc = sscanf(buf, "%u.%u.%u.%u%c", + &in[0], &in[1], &in[2], &in[3], &c); + if (rc != 4 && (rc != 5 || c != '\n')) + return -EINVAL; + for (count = 0; count < 4; count++) { + if (in[count] > 255) + return -EINVAL; + addr[count] = in[count]; + } + return 0; +} + +void qeth_l3_ipaddr6_to_string(const __u8 *addr, char *buf) +{ + sprintf(buf, "%02x%02x:%02x%02x:%02x%02x:%02x%02x" + ":%02x%02x:%02x%02x:%02x%02x:%02x%02x", + addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], addr[6], addr[7], + addr[8], addr[9], addr[10], addr[11], + addr[12], addr[13], addr[14], addr[15]); +} + +int qeth_l3_string_to_ipaddr6(const char *buf, __u8 *addr) +{ + const char *end, *end_tmp, *start; + __u16 *in; + char num[5]; + int num2, cnt, out, found, save_cnt; + unsigned short in_tmp[8] = {0, }; + + cnt = out = found = save_cnt = num2 = 0; + end = start = buf; + in = (__u16 *) addr; + memset(in, 0, 16); + while (*end) { + end = strchr(start, ':'); + if (end == NULL) { + end = buf + strlen(buf); + end_tmp = strchr(start, '\n'); + if (end_tmp != NULL) + end = end_tmp; + out = 1; + } + if ((end - start)) { + memset(num, 0, 5); + if ((end - start) > 4) + return -EINVAL; + memcpy(num, start, end - start); + if (!qeth_l3_isxdigit(num)) + return -EINVAL; + sscanf(start, "%x", &num2); + if (found) + in_tmp[save_cnt++] = num2; + else + in[cnt++] = num2; + if (out) + break; + } else { + if (found) + return -EINVAL; + found = 1; + } + start = ++end; + } + if (cnt + save_cnt > 8) + return -EINVAL; + cnt = 7; + while (save_cnt) + in[cnt--] = in_tmp[--save_cnt]; + return 0; +} + +void qeth_l3_ipaddr_to_string(enum qeth_prot_versions proto, const __u8 *addr, + char *buf) +{ + if (proto == QETH_PROT_IPV4) + qeth_l3_ipaddr4_to_string(addr, buf); + else if (proto == QETH_PROT_IPV6) + qeth_l3_ipaddr6_to_string(addr, buf); +} + +int qeth_l3_string_to_ipaddr(const char *buf, enum qeth_prot_versions proto, + __u8 *addr) +{ + if (proto == QETH_PROT_IPV4) + return qeth_l3_string_to_ipaddr4(buf, addr); + else if (proto == QETH_PROT_IPV6) + return qeth_l3_string_to_ipaddr6(buf, addr); + else + return -EINVAL; +} + +static void qeth_l3_convert_addr_to_bits(u8 *addr, u8 *bits, int len) +{ + int i, j; + u8 octet; + + for (i = 0; i < len; ++i) { + octet = addr[i]; + for (j = 7; j >= 0; --j) { + bits[i*8 + j] = octet & 1; + octet >>= 1; + } + } +} + +static int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *card, + struct qeth_ipaddr *addr) +{ + struct qeth_ipato_entry *ipatoe; + u8 addr_bits[128] = {0, }; + u8 ipatoe_bits[128] = {0, }; + int rc = 0; + + if (!card->ipato.enabled) + return 0; + + qeth_l3_convert_addr_to_bits((u8 *) &addr->u, addr_bits, + (addr->proto == QETH_PROT_IPV4)? 4:16); + list_for_each_entry(ipatoe, &card->ipato.entries, entry) { + if (addr->proto != ipatoe->proto) + continue; + qeth_l3_convert_addr_to_bits(ipatoe->addr, ipatoe_bits, + (ipatoe->proto == QETH_PROT_IPV4) ? + 4 : 16); + if (addr->proto == QETH_PROT_IPV4) + rc = !memcmp(addr_bits, ipatoe_bits, + min(32, ipatoe->mask_bits)); + else + rc = !memcmp(addr_bits, ipatoe_bits, + min(128, ipatoe->mask_bits)); + if (rc) + break; + } + /* invert? */ + if ((addr->proto == QETH_PROT_IPV4) && card->ipato.invert4) + rc = !rc; + else if ((addr->proto == QETH_PROT_IPV6) && card->ipato.invert6) + rc = !rc; + + return rc; +} + +/* + * Add IP to be added to todo list. If there is already an "add todo" + * in this list we just incremenent the reference count. + * Returns 0 if we just incremented reference count. + */ +static int __qeth_l3_insert_ip_todo(struct qeth_card *card, + struct qeth_ipaddr *addr, int add) +{ + struct qeth_ipaddr *tmp, *t; + int found = 0; + + list_for_each_entry_safe(tmp, t, card->ip_tbd_list, entry) { + if ((addr->type == QETH_IP_TYPE_DEL_ALL_MC) && + (tmp->type == QETH_IP_TYPE_DEL_ALL_MC)) + return 0; + if ((tmp->proto == QETH_PROT_IPV4) && + (addr->proto == QETH_PROT_IPV4) && + (tmp->type == addr->type) && + (tmp->is_multicast == addr->is_multicast) && + (tmp->u.a4.addr == addr->u.a4.addr) && + (tmp->u.a4.mask == addr->u.a4.mask)) { + found = 1; + break; + } + if ((tmp->proto == QETH_PROT_IPV6) && + (addr->proto == QETH_PROT_IPV6) && + (tmp->type == addr->type) && + (tmp->is_multicast == addr->is_multicast) && + (tmp->u.a6.pfxlen == addr->u.a6.pfxlen) && + (memcmp(&tmp->u.a6.addr, &addr->u.a6.addr, + sizeof(struct in6_addr)) == 0)) { + found = 1; + break; + } + } + if (found) { + if (addr->users != 0) + tmp->users += addr->users; + else + tmp->users += add ? 1 : -1; + if (tmp->users == 0) { + list_del(&tmp->entry); + kfree(tmp); + } + return 0; + } else { + if (addr->type == QETH_IP_TYPE_DEL_ALL_MC) + list_add(&addr->entry, card->ip_tbd_list); + else { + if (addr->users == 0) + addr->users += add ? 1 : -1; + if (add && (addr->type == QETH_IP_TYPE_NORMAL) && + qeth_l3_is_addr_covered_by_ipato(card, addr)) { + QETH_DBF_TEXT(trace, 2, "tkovaddr"); + addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; + } + list_add_tail(&addr->entry, card->ip_tbd_list); + } + return 1; + } +} + +static int qeth_l3_delete_ip(struct qeth_card *card, struct qeth_ipaddr *addr) +{ + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 4, "delip"); + + if (addr->proto == QETH_PROT_IPV4) + QETH_DBF_HEX(trace, 4, &addr->u.a4.addr, 4); + else { + QETH_DBF_HEX(trace, 4, &addr->u.a6.addr, 8); + QETH_DBF_HEX(trace, 4, ((char *)&addr->u.a6.addr) + 8, 8); + } + spin_lock_irqsave(&card->ip_lock, flags); + rc = __qeth_l3_insert_ip_todo(card, addr, 0); + spin_unlock_irqrestore(&card->ip_lock, flags); + return rc; +} + +static int qeth_l3_add_ip(struct qeth_card *card, struct qeth_ipaddr *addr) +{ + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 4, "addip"); + if (addr->proto == QETH_PROT_IPV4) + QETH_DBF_HEX(trace, 4, &addr->u.a4.addr, 4); + else { + QETH_DBF_HEX(trace, 4, &addr->u.a6.addr, 8); + QETH_DBF_HEX(trace, 4, ((char *)&addr->u.a6.addr) + 8, 8); + } + spin_lock_irqsave(&card->ip_lock, flags); + rc = __qeth_l3_insert_ip_todo(card, addr, 1); + spin_unlock_irqrestore(&card->ip_lock, flags); + return rc; +} + + +static struct qeth_ipaddr *qeth_l3_get_addr_buffer( + enum qeth_prot_versions prot) +{ + struct qeth_ipaddr *addr; + + addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC); + if (addr == NULL) { + PRINT_WARN("Not enough memory to add address\n"); + return NULL; + } + addr->type = QETH_IP_TYPE_NORMAL; + addr->proto = prot; + return addr; +} + +static void qeth_l3_delete_mc_addresses(struct qeth_card *card) +{ + struct qeth_ipaddr *iptodo; + unsigned long flags; + + QETH_DBF_TEXT(trace, 4, "delmc"); + iptodo = qeth_l3_get_addr_buffer(QETH_PROT_IPV4); + if (!iptodo) { + QETH_DBF_TEXT(trace, 2, "dmcnomem"); + return; + } + iptodo->type = QETH_IP_TYPE_DEL_ALL_MC; + spin_lock_irqsave(&card->ip_lock, flags); + if (!__qeth_l3_insert_ip_todo(card, iptodo, 0)) + kfree(iptodo); + spin_unlock_irqrestore(&card->ip_lock, flags); +} + +/* + * Add/remove address to/from card's ip list, i.e. try to add or remove + * reference to/from an IP address that is already registered on the card. + * Returns: + * 0 address was on card and its reference count has been adjusted, + * but is still > 0, so nothing has to be done + * also returns 0 if card was not on card and the todo was to delete + * the address -> there is also nothing to be done + * 1 address was not on card and the todo is to add it to the card's ip + * list + * -1 address was on card and its reference count has been decremented + * to <= 0 by the todo -> address must be removed from card + */ +static int __qeth_l3_ref_ip_on_card(struct qeth_card *card, + struct qeth_ipaddr *todo, struct qeth_ipaddr **__addr) +{ + struct qeth_ipaddr *addr; + int found = 0; + + list_for_each_entry(addr, &card->ip_list, entry) { + if ((addr->proto == QETH_PROT_IPV4) && + (todo->proto == QETH_PROT_IPV4) && + (addr->type == todo->type) && + (addr->u.a4.addr == todo->u.a4.addr) && + (addr->u.a4.mask == todo->u.a4.mask)) { + found = 1; + break; + } + if ((addr->proto == QETH_PROT_IPV6) && + (todo->proto == QETH_PROT_IPV6) && + (addr->type == todo->type) && + (addr->u.a6.pfxlen == todo->u.a6.pfxlen) && + (memcmp(&addr->u.a6.addr, &todo->u.a6.addr, + sizeof(struct in6_addr)) == 0)) { + found = 1; + break; + } + } + if (found) { + addr->users += todo->users; + if (addr->users <= 0) { + *__addr = addr; + return -1; + } else { + /* for VIPA and RXIP limit refcount to 1 */ + if (addr->type != QETH_IP_TYPE_NORMAL) + addr->users = 1; + return 0; + } + } + if (todo->users > 0) { + /* for VIPA and RXIP limit refcount to 1 */ + if (todo->type != QETH_IP_TYPE_NORMAL) + todo->users = 1; + return 1; + } else + return 0; +} + +static void __qeth_l3_delete_all_mc(struct qeth_card *card, + unsigned long *flags) +{ + struct qeth_ipaddr *addr, *tmp; + int rc; +again: + list_for_each_entry_safe(addr, tmp, &card->ip_list, entry) { + if (addr->is_multicast) { + list_del(&addr->entry); + spin_unlock_irqrestore(&card->ip_lock, *flags); + rc = qeth_l3_deregister_addr_entry(card, addr); + spin_lock_irqsave(&card->ip_lock, *flags); + if (!rc) { + kfree(addr); + goto again; + } else + list_add(&addr->entry, &card->ip_list); + } + } +} + +static void qeth_l3_set_ip_addr_list(struct qeth_card *card) +{ + struct list_head *tbd_list; + struct qeth_ipaddr *todo, *addr; + unsigned long flags; + int rc; + + QETH_DBF_TEXT(trace, 2, "sdiplist"); + QETH_DBF_HEX(trace, 2, &card, sizeof(void *)); + + spin_lock_irqsave(&card->ip_lock, flags); + tbd_list = card->ip_tbd_list; + card->ip_tbd_list = kmalloc(sizeof(struct list_head), GFP_ATOMIC); + if (!card->ip_tbd_list) { + QETH_DBF_TEXT(trace, 0, "silnomem"); + card->ip_tbd_list = tbd_list; + spin_unlock_irqrestore(&card->ip_lock, flags); + return; + } else + INIT_LIST_HEAD(card->ip_tbd_list); + + while (!list_empty(tbd_list)) { + todo = list_entry(tbd_list->next, struct qeth_ipaddr, entry); + list_del(&todo->entry); + if (todo->type == QETH_IP_TYPE_DEL_ALL_MC) { + __qeth_l3_delete_all_mc(card, &flags); + kfree(todo); + continue; + } + rc = __qeth_l3_ref_ip_on_card(card, todo, &addr); + if (rc == 0) { + /* nothing to be done; only adjusted refcount */ + kfree(todo); + } else if (rc == 1) { + /* new entry to be added to on-card list */ + spin_unlock_irqrestore(&card->ip_lock, flags); + rc = qeth_l3_register_addr_entry(card, todo); + spin_lock_irqsave(&card->ip_lock, flags); + if (!rc) + list_add_tail(&todo->entry, &card->ip_list); + else + kfree(todo); + } else if (rc == -1) { + /* on-card entry to be removed */ + list_del_init(&addr->entry); + spin_unlock_irqrestore(&card->ip_lock, flags); + rc = qeth_l3_deregister_addr_entry(card, addr); + spin_lock_irqsave(&card->ip_lock, flags); + if (!rc) + kfree(addr); + else + list_add_tail(&addr->entry, &card->ip_list); + kfree(todo); + } + } + spin_unlock_irqrestore(&card->ip_lock, flags); + kfree(tbd_list); +} + +static void qeth_l3_clear_ip_list(struct qeth_card *card, int clean, + int recover) +{ + struct qeth_ipaddr *addr, *tmp; + unsigned long flags; + + QETH_DBF_TEXT(trace, 4, "clearip"); + spin_lock_irqsave(&card->ip_lock, flags); + /* clear todo list */ + list_for_each_entry_safe(addr, tmp, card->ip_tbd_list, entry) { + list_del(&addr->entry); + kfree(addr); + } + + while (!list_empty(&card->ip_list)) { + addr = list_entry(card->ip_list.next, + struct qeth_ipaddr, entry); + list_del_init(&addr->entry); + if (clean) { + spin_unlock_irqrestore(&card->ip_lock, flags); + qeth_l3_deregister_addr_entry(card, addr); + spin_lock_irqsave(&card->ip_lock, flags); + } + if (!recover || addr->is_multicast) { + kfree(addr); + continue; + } + list_add_tail(&addr->entry, card->ip_tbd_list); + } + spin_unlock_irqrestore(&card->ip_lock, flags); +} + +static int qeth_l3_address_exists_in_list(struct list_head *list, + struct qeth_ipaddr *addr, int same_type) +{ + struct qeth_ipaddr *tmp; + + list_for_each_entry(tmp, list, entry) { + if ((tmp->proto == QETH_PROT_IPV4) && + (addr->proto == QETH_PROT_IPV4) && + ((same_type && (tmp->type == addr->type)) || + (!same_type && (tmp->type != addr->type))) && + (tmp->u.a4.addr == addr->u.a4.addr)) + return 1; + + if ((tmp->proto == QETH_PROT_IPV6) && + (addr->proto == QETH_PROT_IPV6) && + ((same_type && (tmp->type == addr->type)) || + (!same_type && (tmp->type != addr->type))) && + (memcmp(&tmp->u.a6.addr, &addr->u.a6.addr, + sizeof(struct in6_addr)) == 0)) + return 1; + + } + return 0; +} + +static int qeth_l3_send_setdelmc(struct qeth_card *card, + struct qeth_ipaddr *addr, int ipacmd) +{ + int rc; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "setdelmc"); + + iob = qeth_get_ipacmd_buffer(card, ipacmd, addr->proto); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + memcpy(&cmd->data.setdelipm.mac, addr->mac, OSA_ADDR_LEN); + if (addr->proto == QETH_PROT_IPV6) + memcpy(cmd->data.setdelipm.ip6, &addr->u.a6.addr, + sizeof(struct in6_addr)); + else + memcpy(&cmd->data.setdelipm.ip4, &addr->u.a4.addr, 4); + + rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); + + return rc; +} + +static void qeth_l3_fill_netmask(u8 *netmask, unsigned int len) +{ + int i, j; + for (i = 0; i < 16; i++) { + j = (len) - (i * 8); + if (j >= 8) + netmask[i] = 0xff; + else if (j > 0) + netmask[i] = (u8)(0xFF00 >> j); + else + netmask[i] = 0; + } +} + +static int qeth_l3_send_setdelip(struct qeth_card *card, + struct qeth_ipaddr *addr, int ipacmd, unsigned int flags) +{ + int rc; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + __u8 netmask[16]; + + QETH_DBF_TEXT(trace, 4, "setdelip"); + QETH_DBF_TEXT_(trace, 4, "flags%02X", flags); + + iob = qeth_get_ipacmd_buffer(card, ipacmd, addr->proto); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + if (addr->proto == QETH_PROT_IPV6) { + memcpy(cmd->data.setdelip6.ip_addr, &addr->u.a6.addr, + sizeof(struct in6_addr)); + qeth_l3_fill_netmask(netmask, addr->u.a6.pfxlen); + memcpy(cmd->data.setdelip6.mask, netmask, + sizeof(struct in6_addr)); + cmd->data.setdelip6.flags = flags; + } else { + memcpy(cmd->data.setdelip4.ip_addr, &addr->u.a4.addr, 4); + memcpy(cmd->data.setdelip4.mask, &addr->u.a4.mask, 4); + cmd->data.setdelip4.flags = flags; + } + + rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); + + return rc; +} + +static int qeth_l3_send_setrouting(struct qeth_card *card, + enum qeth_routing_types type, enum qeth_prot_versions prot) +{ + int rc; + struct qeth_ipa_cmd *cmd; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 4, "setroutg"); + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SETRTG, prot); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setrtg.type = (type); + rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); + + return rc; +} + +static void qeth_l3_correct_routing_type(struct qeth_card *card, + enum qeth_routing_types *type, enum qeth_prot_versions prot) +{ + if (card->info.type == QETH_CARD_TYPE_IQD) { + switch (*type) { + case NO_ROUTER: + case PRIMARY_CONNECTOR: + case SECONDARY_CONNECTOR: + case MULTICAST_ROUTER: + return; + default: + goto out_inval; + } + } else { + switch (*type) { + case NO_ROUTER: + case PRIMARY_ROUTER: + case SECONDARY_ROUTER: + return; + case MULTICAST_ROUTER: + if (qeth_is_ipafunc_supported(card, prot, + IPA_OSA_MC_ROUTER)) + return; + default: + goto out_inval; + } + } +out_inval: + PRINT_WARN("Routing type '%s' not supported for interface %s.\n" + "Router status set to 'no router'.\n", + ((*type == PRIMARY_ROUTER)? "primary router" : + (*type == SECONDARY_ROUTER)? "secondary router" : + (*type == PRIMARY_CONNECTOR)? "primary connector" : + (*type == SECONDARY_CONNECTOR)? "secondary connector" : + (*type == MULTICAST_ROUTER)? "multicast router" : + "unknown"), + card->dev->name); + *type = NO_ROUTER; +} + +int qeth_l3_setrouting_v4(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "setrtg4"); + + qeth_l3_correct_routing_type(card, &card->options.route4.type, + QETH_PROT_IPV4); + + rc = qeth_l3_send_setrouting(card, card->options.route4.type, + QETH_PROT_IPV4); + if (rc) { + card->options.route4.type = NO_ROUTER; + PRINT_WARN("Error (0x%04x) while setting routing type on %s. " + "Type set to 'no router'.\n", + rc, QETH_CARD_IFNAME(card)); + } + return rc; +} + +int qeth_l3_setrouting_v6(struct qeth_card *card) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "setrtg6"); +#ifdef CONFIG_QETH_IPV6 + + if (!qeth_is_supported(card, IPA_IPV6)) + return 0; + qeth_l3_correct_routing_type(card, &card->options.route6.type, + QETH_PROT_IPV6); + + rc = qeth_l3_send_setrouting(card, card->options.route6.type, + QETH_PROT_IPV6); + if (rc) { + card->options.route6.type = NO_ROUTER; + PRINT_WARN("Error (0x%04x) while setting routing type on %s. " + "Type set to 'no router'.\n", + rc, QETH_CARD_IFNAME(card)); + } +#endif + return rc; +} + +/* + * IP address takeover related functions + */ +static void qeth_l3_clear_ipato_list(struct qeth_card *card) +{ + + struct qeth_ipato_entry *ipatoe, *tmp; + unsigned long flags; + + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry_safe(ipatoe, tmp, &card->ipato.entries, entry) { + list_del(&ipatoe->entry); + kfree(ipatoe); + } + spin_unlock_irqrestore(&card->ip_lock, flags); +} + +int qeth_l3_add_ipato_entry(struct qeth_card *card, + struct qeth_ipato_entry *new) +{ + struct qeth_ipato_entry *ipatoe; + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 2, "addipato"); + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry(ipatoe, &card->ipato.entries, entry) { + if (ipatoe->proto != new->proto) + continue; + if (!memcmp(ipatoe->addr, new->addr, + (ipatoe->proto == QETH_PROT_IPV4)? 4:16) && + (ipatoe->mask_bits == new->mask_bits)) { + PRINT_WARN("ipato entry already exists!\n"); + rc = -EEXIST; + break; + } + } + if (!rc) + list_add_tail(&new->entry, &card->ipato.entries); + + spin_unlock_irqrestore(&card->ip_lock, flags); + return rc; +} + +void qeth_l3_del_ipato_entry(struct qeth_card *card, + enum qeth_prot_versions proto, u8 *addr, int mask_bits) +{ + struct qeth_ipato_entry *ipatoe, *tmp; + unsigned long flags; + + QETH_DBF_TEXT(trace, 2, "delipato"); + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry_safe(ipatoe, tmp, &card->ipato.entries, entry) { + if (ipatoe->proto != proto) + continue; + if (!memcmp(ipatoe->addr, addr, + (proto == QETH_PROT_IPV4)? 4:16) && + (ipatoe->mask_bits == mask_bits)) { + list_del(&ipatoe->entry); + kfree(ipatoe); + } + } + spin_unlock_irqrestore(&card->ip_lock, flags); +} + +/* + * VIPA related functions + */ +int qeth_l3_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, + const u8 *addr) +{ + struct qeth_ipaddr *ipaddr; + unsigned long flags; + int rc = 0; + + ipaddr = qeth_l3_get_addr_buffer(proto); + if (ipaddr) { + if (proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "addvipa4"); + memcpy(&ipaddr->u.a4.addr, addr, 4); + ipaddr->u.a4.mask = 0; + } else if (proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "addvipa6"); + memcpy(&ipaddr->u.a6.addr, addr, 16); + ipaddr->u.a6.pfxlen = 0; + } + ipaddr->type = QETH_IP_TYPE_VIPA; + ipaddr->set_flags = QETH_IPA_SETIP_VIPA_FLAG; + ipaddr->del_flags = QETH_IPA_DELIP_VIPA_FLAG; + } else + return -ENOMEM; + spin_lock_irqsave(&card->ip_lock, flags); + if (qeth_l3_address_exists_in_list(&card->ip_list, ipaddr, 0) || + qeth_l3_address_exists_in_list(card->ip_tbd_list, ipaddr, 0)) + rc = -EEXIST; + spin_unlock_irqrestore(&card->ip_lock, flags); + if (rc) { + PRINT_WARN("Cannot add VIPA. Address already exists!\n"); + return rc; + } + if (!qeth_l3_add_ip(card, ipaddr)) + kfree(ipaddr); + qeth_l3_set_ip_addr_list(card); + return rc; +} + +void qeth_l3_del_vipa(struct qeth_card *card, enum qeth_prot_versions proto, + const u8 *addr) +{ + struct qeth_ipaddr *ipaddr; + + ipaddr = qeth_l3_get_addr_buffer(proto); + if (ipaddr) { + if (proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "delvipa4"); + memcpy(&ipaddr->u.a4.addr, addr, 4); + ipaddr->u.a4.mask = 0; + } else if (proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "delvipa6"); + memcpy(&ipaddr->u.a6.addr, addr, 16); + ipaddr->u.a6.pfxlen = 0; + } + ipaddr->type = QETH_IP_TYPE_VIPA; + } else + return; + if (!qeth_l3_delete_ip(card, ipaddr)) + kfree(ipaddr); + qeth_l3_set_ip_addr_list(card); +} + +/* + * proxy ARP related functions + */ +int qeth_l3_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, + const u8 *addr) +{ + struct qeth_ipaddr *ipaddr; + unsigned long flags; + int rc = 0; + + ipaddr = qeth_l3_get_addr_buffer(proto); + if (ipaddr) { + if (proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "addrxip4"); + memcpy(&ipaddr->u.a4.addr, addr, 4); + ipaddr->u.a4.mask = 0; + } else if (proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "addrxip6"); + memcpy(&ipaddr->u.a6.addr, addr, 16); + ipaddr->u.a6.pfxlen = 0; + } + ipaddr->type = QETH_IP_TYPE_RXIP; + ipaddr->set_flags = QETH_IPA_SETIP_TAKEOVER_FLAG; + ipaddr->del_flags = 0; + } else + return -ENOMEM; + spin_lock_irqsave(&card->ip_lock, flags); + if (qeth_l3_address_exists_in_list(&card->ip_list, ipaddr, 0) || + qeth_l3_address_exists_in_list(card->ip_tbd_list, ipaddr, 0)) + rc = -EEXIST; + spin_unlock_irqrestore(&card->ip_lock, flags); + if (rc) { + PRINT_WARN("Cannot add RXIP. Address already exists!\n"); + return rc; + } + if (!qeth_l3_add_ip(card, ipaddr)) + kfree(ipaddr); + qeth_l3_set_ip_addr_list(card); + return 0; +} + +void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions proto, + const u8 *addr) +{ + struct qeth_ipaddr *ipaddr; + + ipaddr = qeth_l3_get_addr_buffer(proto); + if (ipaddr) { + if (proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "addrxip4"); + memcpy(&ipaddr->u.a4.addr, addr, 4); + ipaddr->u.a4.mask = 0; + } else if (proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "addrxip6"); + memcpy(&ipaddr->u.a6.addr, addr, 16); + ipaddr->u.a6.pfxlen = 0; + } + ipaddr->type = QETH_IP_TYPE_RXIP; + } else + return; + if (!qeth_l3_delete_ip(card, ipaddr)) + kfree(ipaddr); + qeth_l3_set_ip_addr_list(card); +} + +static int qeth_l3_register_addr_entry(struct qeth_card *card, + struct qeth_ipaddr *addr) +{ + char buf[50]; + int rc = 0; + int cnt = 3; + + if (addr->proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "setaddr4"); + QETH_DBF_HEX(trace, 3, &addr->u.a4.addr, sizeof(int)); + } else if (addr->proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "setaddr6"); + QETH_DBF_HEX(trace, 3, &addr->u.a6.addr, 8); + QETH_DBF_HEX(trace, 3, ((char *)&addr->u.a6.addr) + 8, 8); + } else { + QETH_DBF_TEXT(trace, 2, "setaddr?"); + QETH_DBF_HEX(trace, 3, addr, sizeof(struct qeth_ipaddr)); + } + do { + if (addr->is_multicast) + rc = qeth_l3_send_setdelmc(card, addr, IPA_CMD_SETIPM); + else + rc = qeth_l3_send_setdelip(card, addr, IPA_CMD_SETIP, + addr->set_flags); + if (rc) + QETH_DBF_TEXT(trace, 2, "failed"); + } while ((--cnt > 0) && rc); + if (rc) { + QETH_DBF_TEXT(trace, 2, "FAILED"); + qeth_l3_ipaddr_to_string(addr->proto, (u8 *)&addr->u, buf); + PRINT_WARN("Could not register IP address %s (rc=0x%x/%d)\n", + buf, rc, rc); + } + return rc; +} + +static int qeth_l3_deregister_addr_entry(struct qeth_card *card, + struct qeth_ipaddr *addr) +{ + int rc = 0; + + if (addr->proto == QETH_PROT_IPV4) { + QETH_DBF_TEXT(trace, 2, "deladdr4"); + QETH_DBF_HEX(trace, 3, &addr->u.a4.addr, sizeof(int)); + } else if (addr->proto == QETH_PROT_IPV6) { + QETH_DBF_TEXT(trace, 2, "deladdr6"); + QETH_DBF_HEX(trace, 3, &addr->u.a6.addr, 8); + QETH_DBF_HEX(trace, 3, ((char *)&addr->u.a6.addr) + 8, 8); + } else { + QETH_DBF_TEXT(trace, 2, "deladdr?"); + QETH_DBF_HEX(trace, 3, addr, sizeof(struct qeth_ipaddr)); + } + if (addr->is_multicast) + rc = qeth_l3_send_setdelmc(card, addr, IPA_CMD_DELIPM); + else + rc = qeth_l3_send_setdelip(card, addr, IPA_CMD_DELIP, + addr->del_flags); + if (rc) { + QETH_DBF_TEXT(trace, 2, "failed"); + /* TODO: re-activate this warning as soon as we have a + * clean mirco code + qeth_ipaddr_to_string(addr->proto, (u8 *)&addr->u, buf); + PRINT_WARN("Could not deregister IP address %s (rc=%x)\n", + buf, rc); + */ + } + + return rc; +} + +static inline u8 qeth_l3_get_qeth_hdr_flags4(int cast_type) +{ + if (cast_type == RTN_MULTICAST) + return QETH_CAST_MULTICAST; + if (cast_type == RTN_BROADCAST) + return QETH_CAST_BROADCAST; + return QETH_CAST_UNICAST; +} + +static inline u8 qeth_l3_get_qeth_hdr_flags6(int cast_type) +{ + u8 ct = QETH_HDR_PASSTHRU | QETH_HDR_IPV6; + if (cast_type == RTN_MULTICAST) + return ct | QETH_CAST_MULTICAST; + if (cast_type == RTN_ANYCAST) + return ct | QETH_CAST_ANYCAST; + if (cast_type == RTN_BROADCAST) + return ct | QETH_CAST_BROADCAST; + return ct | QETH_CAST_UNICAST; +} + +static int qeth_l3_send_setadp_mode(struct qeth_card *card, __u32 command, + __u32 mode) +{ + int rc; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "adpmode"); + + iob = qeth_get_adapter_cmd(card, command, + sizeof(struct qeth_ipacmd_setadpparms)); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setadapterparms.data.mode = mode; + rc = qeth_send_ipa_cmd(card, iob, qeth_default_setadapterparms_cb, + NULL); + return rc; +} + +static int qeth_l3_setadapter_hstr(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 4, "adphstr"); + + if (qeth_adp_supported(card, IPA_SETADP_SET_BROADCAST_MODE)) { + rc = qeth_l3_send_setadp_mode(card, + IPA_SETADP_SET_BROADCAST_MODE, + card->options.broadcast_mode); + if (rc) + PRINT_WARN("couldn't set broadcast mode on " + "device %s: x%x\n", + CARD_BUS_ID(card), rc); + rc = qeth_l3_send_setadp_mode(card, + IPA_SETADP_ALTER_MAC_ADDRESS, + card->options.macaddr_mode); + if (rc) + PRINT_WARN("couldn't set macaddr mode on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); + return rc; + } + if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL) + PRINT_WARN("set adapter parameters not available " + "to set broadcast mode, using ALLRINGS " + "on device %s:\n", CARD_BUS_ID(card)); + if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL) + PRINT_WARN("set adapter parameters not available " + "to set macaddr mode, using NONCANONICAL " + "on device %s:\n", CARD_BUS_ID(card)); + return 0; +} + +static int qeth_l3_setadapter_parms(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(setup, 2, "setadprm"); + + if (!qeth_is_supported(card, IPA_SETADAPTERPARMS)) { + PRINT_WARN("set adapter parameters not supported " + "on device %s.\n", + CARD_BUS_ID(card)); + QETH_DBF_TEXT(setup, 2, " notsupp"); + return 0; + } + rc = qeth_query_setadapterparms(card); + if (rc) { + PRINT_WARN("couldn't set adapter parameters on device %s: " + "x%x\n", CARD_BUS_ID(card), rc); + return rc; + } + if (qeth_adp_supported(card, IPA_SETADP_ALTER_MAC_ADDRESS)) { + rc = qeth_setadpparms_change_macaddr(card); + if (rc) + PRINT_WARN("couldn't get MAC address on " + "device %s: x%x\n", + CARD_BUS_ID(card), rc); + } + + if ((card->info.link_type == QETH_LINK_TYPE_HSTR) || + (card->info.link_type == QETH_LINK_TYPE_LANE_TR)) + rc = qeth_l3_setadapter_hstr(card); + + return rc; +} + +static int qeth_l3_default_setassparms_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "defadpcb"); + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code == 0) { + cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code; + if (cmd->hdr.prot_version == QETH_PROT_IPV4) + card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; + if (cmd->hdr.prot_version == QETH_PROT_IPV6) + card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; + } + if (cmd->data.setassparms.hdr.assist_no == IPA_INBOUND_CHECKSUM && + cmd->data.setassparms.hdr.command_code == IPA_CMD_ASS_START) { + card->info.csum_mask = cmd->data.setassparms.data.flags_32bit; + QETH_DBF_TEXT_(trace, 3, "csum:%d", card->info.csum_mask); + } + return 0; +} + +static struct qeth_cmd_buffer *qeth_l3_get_setassparms_cmd( + struct qeth_card *card, enum qeth_ipa_funcs ipa_func, __u16 cmd_code, + __u16 len, enum qeth_prot_versions prot) +{ + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "getasscm"); + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SETASSPARMS, prot); + + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + cmd->data.setassparms.hdr.assist_no = ipa_func; + cmd->data.setassparms.hdr.length = 8 + len; + cmd->data.setassparms.hdr.command_code = cmd_code; + cmd->data.setassparms.hdr.return_code = 0; + cmd->data.setassparms.hdr.seq_no = 0; + + return iob; +} + +static int qeth_l3_send_setassparms(struct qeth_card *card, + struct qeth_cmd_buffer *iob, __u16 len, long data, + int (*reply_cb)(struct qeth_card *, struct qeth_reply *, + unsigned long), + void *reply_param) +{ + int rc; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 4, "sendassp"); + + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + if (len <= sizeof(__u32)) + cmd->data.setassparms.data.flags_32bit = (__u32) data; + else /* (len > sizeof(__u32)) */ + memcpy(&cmd->data.setassparms.data, (void *) data, len); + + rc = qeth_send_ipa_cmd(card, iob, reply_cb, reply_param); + return rc; +} + +#ifdef CONFIG_QETH_IPV6 +static int qeth_l3_send_simple_setassparms_ipv6(struct qeth_card *card, + enum qeth_ipa_funcs ipa_func, __u16 cmd_code) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 4, "simassp6"); + iob = qeth_l3_get_setassparms_cmd(card, ipa_func, cmd_code, + 0, QETH_PROT_IPV6); + rc = qeth_l3_send_setassparms(card, iob, 0, 0, + qeth_l3_default_setassparms_cb, NULL); + return rc; +} +#endif + +static int qeth_l3_send_simple_setassparms(struct qeth_card *card, + enum qeth_ipa_funcs ipa_func, __u16 cmd_code, long data) +{ + int rc; + int length = 0; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT(trace, 4, "simassp4"); + if (data) + length = sizeof(__u32); + iob = qeth_l3_get_setassparms_cmd(card, ipa_func, cmd_code, + length, QETH_PROT_IPV4); + rc = qeth_l3_send_setassparms(card, iob, length, data, + qeth_l3_default_setassparms_cb, NULL); + return rc; +} + +static int qeth_l3_start_ipa_arp_processing(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "ipaarp"); + + if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return 0; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Could not start ARP processing " + "assist on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + } + return rc; +} + +static int qeth_l3_start_ipa_ip_fragmentation(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "ipaipfrg"); + + if (!qeth_is_supported(card, IPA_IP_FRAGMENTATION)) { + PRINT_INFO("Hardware IP fragmentation not supported on %s\n", + QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + + rc = qeth_l3_send_simple_setassparms(card, IPA_IP_FRAGMENTATION, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Could not start Hardware IP fragmentation " + "assist on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + } else + PRINT_INFO("Hardware IP fragmentation enabled \n"); + return rc; +} + +static int qeth_l3_start_ipa_source_mac(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "stsrcmac"); + + if (!card->options.fake_ll) + return -EOPNOTSUPP; + + if (!qeth_is_supported(card, IPA_SOURCE_MAC)) { + PRINT_INFO("Inbound source address not " + "supported on %s\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + + rc = qeth_l3_send_simple_setassparms(card, IPA_SOURCE_MAC, + IPA_CMD_ASS_START, 0); + if (rc) + PRINT_WARN("Could not start inbound source " + "assist on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + return rc; +} + +static int qeth_l3_start_ipa_vlan(struct qeth_card *card) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "strtvlan"); + + if (!qeth_is_supported(card, IPA_FULL_VLAN)) { + PRINT_WARN("VLAN not supported on %s\n", + QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + + rc = qeth_l3_send_simple_setassparms(card, IPA_VLAN_PRIO, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Could not start vlan " + "assist on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + } else { + PRINT_INFO("VLAN enabled \n"); + } + return rc; +} + +static int qeth_l3_start_ipa_multicast(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "stmcast"); + + if (!qeth_is_supported(card, IPA_MULTICASTING)) { + PRINT_WARN("Multicast not supported on %s\n", + QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + + rc = qeth_l3_send_simple_setassparms(card, IPA_MULTICASTING, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Could not start multicast " + "assist on %s: rc=%i\n", + QETH_CARD_IFNAME(card), rc); + } else { + PRINT_INFO("Multicast enabled\n"); + card->dev->flags |= IFF_MULTICAST; + } + return rc; +} + +static int qeth_l3_query_ipassists_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(setup, 2, "qipasscb"); + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.prot_version == QETH_PROT_IPV4) { + card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; + card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; + } else { + card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; + card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; + } + QETH_DBF_TEXT(setup, 2, "suppenbl"); + QETH_DBF_TEXT_(setup, 2, "%x", cmd->hdr.ipa_supported); + QETH_DBF_TEXT_(setup, 2, "%x", cmd->hdr.ipa_enabled); + return 0; +} + +static int qeth_l3_query_ipassists(struct qeth_card *card, + enum qeth_prot_versions prot) +{ + int rc; + struct qeth_cmd_buffer *iob; + + QETH_DBF_TEXT_(setup, 2, "qipassi%i", prot); + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_QIPASSIST, prot); + rc = qeth_send_ipa_cmd(card, iob, qeth_l3_query_ipassists_cb, NULL); + return rc; +} + +#ifdef CONFIG_QETH_IPV6 +static int qeth_l3_softsetup_ipv6(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "softipv6"); + + if (card->info.type == QETH_CARD_TYPE_IQD) + goto out; + + rc = qeth_l3_query_ipassists(card, QETH_PROT_IPV6); + if (rc) { + PRINT_ERR("IPv6 query ipassist failed on %s\n", + QETH_CARD_IFNAME(card)); + return rc; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_IPV6, + IPA_CMD_ASS_START, 3); + if (rc) { + PRINT_WARN("IPv6 start assist (version 4) failed " + "on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + return rc; + } + rc = qeth_l3_send_simple_setassparms_ipv6(card, IPA_IPV6, + IPA_CMD_ASS_START); + if (rc) { + PRINT_WARN("IPV6 start assist (version 6) failed " + "on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + return rc; + } + rc = qeth_l3_send_simple_setassparms_ipv6(card, IPA_PASSTHRU, + IPA_CMD_ASS_START); + if (rc) { + PRINT_WARN("Could not enable passthrough " + "on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + return rc; + } +out: + PRINT_INFO("IPV6 enabled \n"); + return 0; +} +#endif + +static int qeth_l3_start_ipa_ipv6(struct qeth_card *card) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "strtipv6"); + + if (!qeth_is_supported(card, IPA_IPV6)) { + PRINT_WARN("IPv6 not supported on %s\n", + QETH_CARD_IFNAME(card)); + return 0; + } +#ifdef CONFIG_QETH_IPV6 + rc = qeth_l3_softsetup_ipv6(card); +#endif + return rc ; +} + +static int qeth_l3_start_ipa_broadcast(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "stbrdcst"); + card->info.broadcast_capable = 0; + if (!qeth_is_supported(card, IPA_FILTERING)) { + PRINT_WARN("Broadcast not supported on %s\n", + QETH_CARD_IFNAME(card)); + rc = -EOPNOTSUPP; + goto out; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_FILTERING, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Could not enable broadcasting filtering " + "on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + goto out; + } + + rc = qeth_l3_send_simple_setassparms(card, IPA_FILTERING, + IPA_CMD_ASS_CONFIGURE, 1); + if (rc) { + PRINT_WARN("Could not set up broadcast filtering on %s: 0x%x\n", + QETH_CARD_IFNAME(card), rc); + goto out; + } + card->info.broadcast_capable = QETH_BROADCAST_WITH_ECHO; + PRINT_INFO("Broadcast enabled \n"); + rc = qeth_l3_send_simple_setassparms(card, IPA_FILTERING, + IPA_CMD_ASS_ENABLE, 1); + if (rc) { + PRINT_WARN("Could not set up broadcast echo filtering on " + "%s: 0x%x\n", QETH_CARD_IFNAME(card), rc); + goto out; + } + card->info.broadcast_capable = QETH_BROADCAST_WITHOUT_ECHO; +out: + if (card->info.broadcast_capable) + card->dev->flags |= IFF_BROADCAST; + else + card->dev->flags &= ~IFF_BROADCAST; + return rc; +} + +static int qeth_l3_send_checksum_command(struct qeth_card *card) +{ + int rc; + + rc = qeth_l3_send_simple_setassparms(card, IPA_INBOUND_CHECKSUM, + IPA_CMD_ASS_START, 0); + if (rc) { + PRINT_WARN("Starting Inbound HW Checksumming failed on %s: " + "0x%x,\ncontinuing using Inbound SW Checksumming\n", + QETH_CARD_IFNAME(card), rc); + return rc; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_INBOUND_CHECKSUM, + IPA_CMD_ASS_ENABLE, + card->info.csum_mask); + if (rc) { + PRINT_WARN("Enabling Inbound HW Checksumming failed on %s: " + "0x%x,\ncontinuing using Inbound SW Checksumming\n", + QETH_CARD_IFNAME(card), rc); + return rc; + } + return 0; +} + +static int qeth_l3_start_ipa_checksum(struct qeth_card *card) +{ + int rc = 0; + + QETH_DBF_TEXT(trace, 3, "strtcsum"); + + if (card->options.checksum_type == NO_CHECKSUMMING) { + PRINT_WARN("Using no checksumming on %s.\n", + QETH_CARD_IFNAME(card)); + return 0; + } + if (card->options.checksum_type == SW_CHECKSUMMING) { + PRINT_WARN("Using SW checksumming on %s.\n", + QETH_CARD_IFNAME(card)); + return 0; + } + if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM)) { + PRINT_WARN("Inbound HW Checksumming not " + "supported on %s,\ncontinuing " + "using Inbound SW Checksumming\n", + QETH_CARD_IFNAME(card)); + card->options.checksum_type = SW_CHECKSUMMING; + return 0; + } + rc = qeth_l3_send_checksum_command(card); + if (!rc) + PRINT_INFO("HW Checksumming (inbound) enabled \n"); + + return rc; +} + +static int qeth_l3_start_ipa_tso(struct qeth_card *card) +{ + int rc; + + QETH_DBF_TEXT(trace, 3, "sttso"); + + if (!qeth_is_supported(card, IPA_OUTBOUND_TSO)) { + PRINT_WARN("Outbound TSO not supported on %s\n", + QETH_CARD_IFNAME(card)); + rc = -EOPNOTSUPP; + } else { + rc = qeth_l3_send_simple_setassparms(card, IPA_OUTBOUND_TSO, + IPA_CMD_ASS_START, 0); + if (rc) + PRINT_WARN("Could not start outbound TSO " + "assist on %s: rc=%i\n", + QETH_CARD_IFNAME(card), rc); + else + PRINT_INFO("Outbound TSO enabled\n"); + } + if (rc && (card->options.large_send == QETH_LARGE_SEND_TSO)) { + card->options.large_send = QETH_LARGE_SEND_NO; + card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG); + } + return rc; +} + +static int qeth_l3_start_ipassists(struct qeth_card *card) +{ + QETH_DBF_TEXT(trace, 3, "strtipas"); + qeth_l3_start_ipa_arp_processing(card); /* go on*/ + qeth_l3_start_ipa_ip_fragmentation(card); /* go on*/ + qeth_l3_start_ipa_source_mac(card); /* go on*/ + qeth_l3_start_ipa_vlan(card); /* go on*/ + qeth_l3_start_ipa_multicast(card); /* go on*/ + qeth_l3_start_ipa_ipv6(card); /* go on*/ + qeth_l3_start_ipa_broadcast(card); /* go on*/ + qeth_l3_start_ipa_checksum(card); /* go on*/ + qeth_l3_start_ipa_tso(card); /* go on*/ + return 0; +} + +static int qeth_l3_put_unique_id(struct qeth_card *card) +{ + + int rc = 0; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(trace, 2, "puniqeid"); + + if ((card->info.unique_id & UNIQUE_ID_NOT_BY_CARD) == + UNIQUE_ID_NOT_BY_CARD) + return -1; + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_DESTROY_ADDR, + QETH_PROT_IPV6); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + *((__u16 *) &cmd->data.create_destroy_addr.unique_id[6]) = + card->info.unique_id; + memcpy(&cmd->data.create_destroy_addr.unique_id[0], + card->dev->dev_addr, OSA_ADDR_LEN); + rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); + return rc; +} + +static int qeth_l3_iqd_read_initial_mac_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code == 0) + memcpy(card->dev->dev_addr, + cmd->data.create_destroy_addr.unique_id, ETH_ALEN); + else + random_ether_addr(card->dev->dev_addr); + + return 0; +} + +static int qeth_l3_iqd_read_initial_mac(struct qeth_card *card) +{ + int rc = 0; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(setup, 2, "hsrmac"); + + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_CREATE_ADDR, + QETH_PROT_IPV6); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + *((__u16 *) &cmd->data.create_destroy_addr.unique_id[6]) = + card->info.unique_id; + + rc = qeth_send_ipa_cmd(card, iob, qeth_l3_iqd_read_initial_mac_cb, + NULL); + return rc; +} + +static int qeth_l3_get_unique_id_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code == 0) + card->info.unique_id = *((__u16 *) + &cmd->data.create_destroy_addr.unique_id[6]); + else { + card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | + UNIQUE_ID_NOT_BY_CARD; + PRINT_WARN("couldn't get a unique id from the card on device " + "%s (result=x%x), using default id. ipv6 " + "autoconfig on other lpars may lead to duplicate " + "ip addresses. please use manually " + "configured ones.\n", + CARD_BUS_ID(card), cmd->hdr.return_code); + } + return 0; +} + +static int qeth_l3_get_unique_id(struct qeth_card *card) +{ + int rc = 0; + struct qeth_cmd_buffer *iob; + struct qeth_ipa_cmd *cmd; + + QETH_DBF_TEXT(setup, 2, "guniqeid"); + + if (!qeth_is_supported(card, IPA_IPV6)) { + card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | + UNIQUE_ID_NOT_BY_CARD; + return 0; + } + + iob = qeth_get_ipacmd_buffer(card, IPA_CMD_CREATE_ADDR, + QETH_PROT_IPV6); + cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); + *((__u16 *) &cmd->data.create_destroy_addr.unique_id[6]) = + card->info.unique_id; + + rc = qeth_send_ipa_cmd(card, iob, qeth_l3_get_unique_id_cb, NULL); + return rc; +} + +static void qeth_l3_get_mac_for_ipm(__u32 ipm, char *mac, + struct net_device *dev) +{ + if (dev->type == ARPHRD_IEEE802_TR) + ip_tr_mc_map(ipm, mac); + else + ip_eth_mc_map(ipm, mac); +} + +static void qeth_l3_add_mc(struct qeth_card *card, struct in_device *in4_dev) +{ + struct qeth_ipaddr *ipm; + struct ip_mc_list *im4; + char buf[MAX_ADDR_LEN]; + + QETH_DBF_TEXT(trace, 4, "addmc"); + for (im4 = in4_dev->mc_list; im4; im4 = im4->next) { + qeth_l3_get_mac_for_ipm(im4->multiaddr, buf, in4_dev->dev); + ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV4); + if (!ipm) + continue; + ipm->u.a4.addr = im4->multiaddr; + memcpy(ipm->mac, buf, OSA_ADDR_LEN); + ipm->is_multicast = 1; + if (!qeth_l3_add_ip(card, ipm)) + kfree(ipm); + } +} + +static void qeth_l3_add_vlan_mc(struct qeth_card *card) +{ + struct in_device *in_dev; + struct vlan_group *vg; + int i; + + QETH_DBF_TEXT(trace, 4, "addmcvl"); + if (!qeth_is_supported(card, IPA_FULL_VLAN) || (card->vlangrp == NULL)) + return; + + vg = card->vlangrp; + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + struct net_device *netdev = vlan_group_get_device(vg, i); + if (netdev == NULL || + !(netdev->flags & IFF_UP)) + continue; + in_dev = in_dev_get(netdev); + if (!in_dev) + continue; + read_lock(&in_dev->mc_list_lock); + qeth_l3_add_mc(card, in_dev); + read_unlock(&in_dev->mc_list_lock); + in_dev_put(in_dev); + } +} + +static void qeth_l3_add_multicast_ipv4(struct qeth_card *card) +{ + struct in_device *in4_dev; + + QETH_DBF_TEXT(trace, 4, "chkmcv4"); + in4_dev = in_dev_get(card->dev); + if (in4_dev == NULL) + return; + read_lock(&in4_dev->mc_list_lock); + qeth_l3_add_mc(card, in4_dev); + qeth_l3_add_vlan_mc(card); + read_unlock(&in4_dev->mc_list_lock); + in_dev_put(in4_dev); +} + +#ifdef CONFIG_QETH_IPV6 +static void qeth_l3_add_mc6(struct qeth_card *card, struct inet6_dev *in6_dev) +{ + struct qeth_ipaddr *ipm; + struct ifmcaddr6 *im6; + char buf[MAX_ADDR_LEN]; + + QETH_DBF_TEXT(trace, 4, "addmc6"); + for (im6 = in6_dev->mc_list; im6 != NULL; im6 = im6->next) { + ndisc_mc_map(&im6->mca_addr, buf, in6_dev->dev, 0); + ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV6); + if (!ipm) + continue; + ipm->is_multicast = 1; + memcpy(ipm->mac, buf, OSA_ADDR_LEN); + memcpy(&ipm->u.a6.addr, &im6->mca_addr.s6_addr, + sizeof(struct in6_addr)); + if (!qeth_l3_add_ip(card, ipm)) + kfree(ipm); + } +} + +static void qeth_l3_add_vlan_mc6(struct qeth_card *card) +{ + struct inet6_dev *in_dev; + struct vlan_group *vg; + int i; + + QETH_DBF_TEXT(trace, 4, "admc6vl"); + if (!qeth_is_supported(card, IPA_FULL_VLAN) || (card->vlangrp == NULL)) + return; + + vg = card->vlangrp; + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + struct net_device *netdev = vlan_group_get_device(vg, i); + if (netdev == NULL || + !(netdev->flags & IFF_UP)) + continue; + in_dev = in6_dev_get(netdev); + if (!in_dev) + continue; + read_lock_bh(&in_dev->lock); + qeth_l3_add_mc6(card, in_dev); + read_unlock_bh(&in_dev->lock); + in6_dev_put(in_dev); + } +} + +static void qeth_l3_add_multicast_ipv6(struct qeth_card *card) +{ + struct inet6_dev *in6_dev; + + QETH_DBF_TEXT(trace, 4, "chkmcv6"); + if (!qeth_is_supported(card, IPA_IPV6)) + return ; + in6_dev = in6_dev_get(card->dev); + if (in6_dev == NULL) + return; + read_lock_bh(&in6_dev->lock); + qeth_l3_add_mc6(card, in6_dev); + qeth_l3_add_vlan_mc6(card); + read_unlock_bh(&in6_dev->lock); + in6_dev_put(in6_dev); +} +#endif /* CONFIG_QETH_IPV6 */ + +static void qeth_l3_free_vlan_addresses4(struct qeth_card *card, + unsigned short vid) +{ + struct in_device *in_dev; + struct in_ifaddr *ifa; + struct qeth_ipaddr *addr; + + QETH_DBF_TEXT(trace, 4, "frvaddr4"); + + in_dev = in_dev_get(vlan_group_get_device(card->vlangrp, vid)); + if (!in_dev) + return; + for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) { + addr = qeth_l3_get_addr_buffer(QETH_PROT_IPV4); + if (addr) { + addr->u.a4.addr = ifa->ifa_address; + addr->u.a4.mask = ifa->ifa_mask; + addr->type = QETH_IP_TYPE_NORMAL; + if (!qeth_l3_delete_ip(card, addr)) + kfree(addr); + } + } + in_dev_put(in_dev); +} + +static void qeth_l3_free_vlan_addresses6(struct qeth_card *card, + unsigned short vid) +{ +#ifdef CONFIG_QETH_IPV6 + struct inet6_dev *in6_dev; + struct inet6_ifaddr *ifa; + struct qeth_ipaddr *addr; + + QETH_DBF_TEXT(trace, 4, "frvaddr6"); + + in6_dev = in6_dev_get(vlan_group_get_device(card->vlangrp, vid)); + if (!in6_dev) + return; + for (ifa = in6_dev->addr_list; ifa; ifa = ifa->lst_next) { + addr = qeth_l3_get_addr_buffer(QETH_PROT_IPV6); + if (addr) { + memcpy(&addr->u.a6.addr, &ifa->addr, + sizeof(struct in6_addr)); + addr->u.a6.pfxlen = ifa->prefix_len; + addr->type = QETH_IP_TYPE_NORMAL; + if (!qeth_l3_delete_ip(card, addr)) + kfree(addr); + } + } + in6_dev_put(in6_dev); +#endif /* CONFIG_QETH_IPV6 */ +} + +static void qeth_l3_free_vlan_addresses(struct qeth_card *card, + unsigned short vid) +{ + if (!card->vlangrp) + return; + qeth_l3_free_vlan_addresses4(card, vid); + qeth_l3_free_vlan_addresses6(card, vid); +} + +static void qeth_l3_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct qeth_card *card = netdev_priv(dev); + unsigned long flags; + + QETH_DBF_TEXT(trace, 4, "vlanreg"); + spin_lock_irqsave(&card->vlanlock, flags); + card->vlangrp = grp; + spin_unlock_irqrestore(&card->vlanlock, flags); +} + +static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct net_device *vlandev; + struct qeth_card *card = (struct qeth_card *) dev->priv; + struct in_device *in_dev; + + if (card->info.type == QETH_CARD_TYPE_IQD) + return; + + vlandev = vlan_group_get_device(card->vlangrp, vid); + vlandev->neigh_setup = qeth_l3_neigh_setup; + + in_dev = in_dev_get(vlandev); +#ifdef CONFIG_SYSCTL + neigh_sysctl_unregister(in_dev->arp_parms); +#endif + neigh_parms_release(&arp_tbl, in_dev->arp_parms); + + in_dev->arp_parms = neigh_parms_alloc(vlandev, &arp_tbl); +#ifdef CONFIG_SYSCTL + neigh_sysctl_register(vlandev, in_dev->arp_parms, NET_IPV4, + NET_IPV4_NEIGH, "ipv4", NULL, NULL); +#endif + in_dev_put(in_dev); + return; +} + +static void qeth_l3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct qeth_card *card = netdev_priv(dev); + unsigned long flags; + + QETH_DBF_TEXT_(trace, 4, "kid:%d", vid); + spin_lock_irqsave(&card->vlanlock, flags); + /* unregister IP addresses of vlan device */ + qeth_l3_free_vlan_addresses(card, vid); + vlan_group_set_device(card->vlangrp, vid, NULL); + spin_unlock_irqrestore(&card->vlanlock, flags); + qeth_l3_set_multicast_list(card->dev); +} + +static inline __u16 qeth_l3_rebuild_skb(struct qeth_card *card, + struct sk_buff *skb, struct qeth_hdr *hdr) +{ + unsigned short vlan_id = 0; + __be16 prot; + struct iphdr *ip_hdr; + unsigned char tg_addr[MAX_ADDR_LEN]; + + if (!(hdr->hdr.l3.flags & QETH_HDR_PASSTHRU)) { + prot = htons((hdr->hdr.l3.flags & QETH_HDR_IPV6)? ETH_P_IPV6 : + ETH_P_IP); + switch (hdr->hdr.l3.flags & QETH_HDR_CAST_MASK) { + case QETH_CAST_MULTICAST: + switch (prot) { +#ifdef CONFIG_QETH_IPV6 + case __constant_htons(ETH_P_IPV6): + ndisc_mc_map((struct in6_addr *) + skb->data + 24, + tg_addr, card->dev, 0); + break; +#endif + case __constant_htons(ETH_P_IP): + ip_hdr = (struct iphdr *)skb->data; + (card->dev->type == ARPHRD_IEEE802_TR) ? + ip_tr_mc_map(ip_hdr->daddr, tg_addr): + ip_eth_mc_map(ip_hdr->daddr, tg_addr); + break; + default: + memcpy(tg_addr, card->dev->broadcast, + card->dev->addr_len); + } + card->stats.multicast++; + skb->pkt_type = PACKET_MULTICAST; + break; + case QETH_CAST_BROADCAST: + memcpy(tg_addr, card->dev->broadcast, + card->dev->addr_len); + card->stats.multicast++; + skb->pkt_type = PACKET_BROADCAST; + break; + case QETH_CAST_UNICAST: + case QETH_CAST_ANYCAST: + case QETH_CAST_NOCAST: + default: + skb->pkt_type = PACKET_HOST; + memcpy(tg_addr, card->dev->dev_addr, + card->dev->addr_len); + } + card->dev->header_ops->create(skb, card->dev, prot, tg_addr, + "FAKELL", card->dev->addr_len); + } + +#ifdef CONFIG_TR + if (card->dev->type == ARPHRD_IEEE802_TR) + skb->protocol = tr_type_trans(skb, card->dev); + else +#endif + skb->protocol = eth_type_trans(skb, card->dev); + + if (hdr->hdr.l3.ext_flags & + (QETH_HDR_EXT_VLAN_FRAME | QETH_HDR_EXT_INCLUDE_VLAN_TAG)) { + vlan_id = (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_VLAN_FRAME)? + hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]); + } + + skb->ip_summed = card->options.checksum_type; + if (card->options.checksum_type == HW_CHECKSUMMING) { + if ((hdr->hdr.l3.ext_flags & + (QETH_HDR_EXT_CSUM_HDR_REQ | + QETH_HDR_EXT_CSUM_TRANSP_REQ)) == + (QETH_HDR_EXT_CSUM_HDR_REQ | + QETH_HDR_EXT_CSUM_TRANSP_REQ)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = SW_CHECKSUMMING; + } + + return vlan_id; +} + +static void qeth_l3_process_inbound_buffer(struct qeth_card *card, + struct qeth_qdio_buffer *buf, int index) +{ + struct qdio_buffer_element *element; + struct sk_buff *skb; + struct qeth_hdr *hdr; + int offset; + __u16 vlan_tag = 0; + unsigned int len; + + /* get first element of current buffer */ + element = (struct qdio_buffer_element *)&buf->buffer->element[0]; + offset = 0; + if (card->options.performance_stats) + card->perf_stats.bufs_rec++; + while ((skb = qeth_core_get_next_skb(card, buf->buffer, &element, + &offset, &hdr))) { + skb->dev = card->dev; + /* is device UP ? */ + if (!(card->dev->flags & IFF_UP)) { + dev_kfree_skb_any(skb); + continue; + } + + switch (hdr->hdr.l3.id) { + case QETH_HEADER_TYPE_LAYER3: + vlan_tag = qeth_l3_rebuild_skb(card, skb, hdr); + len = skb->len; + if (vlan_tag) + if (card->vlangrp) + vlan_hwaccel_rx(skb, card->vlangrp, + vlan_tag); + else { + dev_kfree_skb_any(skb); + continue; + } + else + netif_rx(skb); + break; + default: + dev_kfree_skb_any(skb); + QETH_DBF_TEXT(trace, 3, "inbunkno"); + QETH_DBF_HEX(control, 3, hdr, QETH_DBF_CONTROL_LEN); + continue; + } + + card->dev->last_rx = jiffies; + card->stats.rx_packets++; + card->stats.rx_bytes += len; + } +} + +static int qeth_l3_verify_vlan_dev(struct net_device *dev, + struct qeth_card *card) +{ + int rc = 0; + struct vlan_group *vg; + int i; + + vg = card->vlangrp; + if (!vg) + return rc; + + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + if (vlan_group_get_device(vg, i) == dev) { + rc = QETH_VLAN_CARD; + break; + } + } + + if (rc && !(netdev_priv(vlan_dev_info(dev)->real_dev) == (void *)card)) + return 0; + + return rc; +} + +static int qeth_l3_verify_dev(struct net_device *dev) +{ + struct qeth_card *card; + unsigned long flags; + int rc = 0; + + read_lock_irqsave(&qeth_core_card_list.rwlock, flags); + list_for_each_entry(card, &qeth_core_card_list.list, list) { + if (card->dev == dev) { + rc = QETH_REAL_CARD; + break; + } + rc = qeth_l3_verify_vlan_dev(dev, card); + if (rc) + break; + } + read_unlock_irqrestore(&qeth_core_card_list.rwlock, flags); + + return rc; +} + +static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev) +{ + struct qeth_card *card = NULL; + int rc; + + rc = qeth_l3_verify_dev(dev); + if (rc == QETH_REAL_CARD) + card = netdev_priv(dev); + else if (rc == QETH_VLAN_CARD) + card = netdev_priv(vlan_dev_info(dev)->real_dev); + if (card->options.layer2) + card = NULL; + QETH_DBF_TEXT_(trace, 4, "%d", rc); + return card ; +} + +static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode) +{ + int rc = 0; + + QETH_DBF_TEXT(setup, 2, "stopcard"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + + qeth_set_allowed_threads(card, 0, 1); + if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) + return -ERESTARTSYS; + if (card->read.state == CH_STATE_UP && + card->write.state == CH_STATE_UP && + (card->state == CARD_STATE_UP)) { + if (recovery_mode) + qeth_l3_stop(card->dev); + if (!card->use_hard_stop) { + rc = qeth_send_stoplan(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + } + card->state = CARD_STATE_SOFTSETUP; + } + if (card->state == CARD_STATE_SOFTSETUP) { + qeth_l3_clear_ip_list(card, !card->use_hard_stop, 1); + qeth_clear_ipacmd_list(card); + card->state = CARD_STATE_HARDSETUP; + } + if (card->state == CARD_STATE_HARDSETUP) { + if (!card->use_hard_stop && + (card->info.type != QETH_CARD_TYPE_IQD)) { + rc = qeth_l3_put_unique_id(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + } + qeth_qdio_clear_card(card, 0); + qeth_clear_qdio_buffers(card); + qeth_clear_working_pool_list(card); + card->state = CARD_STATE_DOWN; + } + if (card->state == CARD_STATE_DOWN) { + qeth_clear_cmd_buffers(&card->read); + qeth_clear_cmd_buffers(&card->write); + } + card->use_hard_stop = 0; + return rc; +} + +static void qeth_l3_set_multicast_list(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 3, "setmulti"); + qeth_l3_delete_mc_addresses(card); + qeth_l3_add_multicast_ipv4(card); +#ifdef CONFIG_QETH_IPV6 + qeth_l3_add_multicast_ipv6(card); +#endif + qeth_l3_set_ip_addr_list(card); + if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) + return; + qeth_setadp_promisc_mode(card); +} + +static const char *qeth_l3_arp_get_error_cause(int *rc) +{ + switch (*rc) { + case QETH_IPA_ARP_RC_FAILED: + *rc = -EIO; + return "operation failed"; + case QETH_IPA_ARP_RC_NOTSUPP: + *rc = -EOPNOTSUPP; + return "operation not supported"; + case QETH_IPA_ARP_RC_OUT_OF_RANGE: + *rc = -EINVAL; + return "argument out of range"; + case QETH_IPA_ARP_RC_Q_NOTSUPP: + *rc = -EOPNOTSUPP; + return "query operation not supported"; + case QETH_IPA_ARP_RC_Q_NO_DATA: + *rc = -ENOENT; + return "no query data available"; + default: + return "unknown error"; + } +} + +static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) +{ + int tmp; + int rc; + + QETH_DBF_TEXT(trace, 3, "arpstnoe"); + + /* + * currently GuestLAN only supports the ARP assist function + * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_SET_NO_ENTRIES; + * thus we say EOPNOTSUPP for this ARP function + */ + if (card->info.guestlan) + return -EOPNOTSUPP; + if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_ARP_SET_NO_ENTRIES, + no_entries); + if (rc) { + tmp = rc; + PRINT_WARN("Could not set number of ARP entries on %s: " + "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + } + return rc; +} + +static void qeth_l3_copy_arp_entries_stripped(struct qeth_arp_query_info *qinfo, + struct qeth_arp_query_data *qdata, int entry_size, + int uentry_size) +{ + char *entry_ptr; + char *uentry_ptr; + int i; + + entry_ptr = (char *)&qdata->data; + uentry_ptr = (char *)(qinfo->udata + qinfo->udata_offset); + for (i = 0; i < qdata->no_entries; ++i) { + /* strip off 32 bytes "media specific information" */ + memcpy(uentry_ptr, (entry_ptr + 32), entry_size - 32); + entry_ptr += entry_size; + uentry_ptr += uentry_size; + } +} + +static int qeth_l3_arp_query_cb(struct qeth_card *card, + struct qeth_reply *reply, unsigned long data) +{ + struct qeth_ipa_cmd *cmd; + struct qeth_arp_query_data *qdata; + struct qeth_arp_query_info *qinfo; + int entry_size; + int uentry_size; + int i; + + QETH_DBF_TEXT(trace, 4, "arpquecb"); + + qinfo = (struct qeth_arp_query_info *) reply->param; + cmd = (struct qeth_ipa_cmd *) data; + if (cmd->hdr.return_code) { + QETH_DBF_TEXT_(trace, 4, "qaer1%i", cmd->hdr.return_code); + return 0; + } + if (cmd->data.setassparms.hdr.return_code) { + cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code; + QETH_DBF_TEXT_(trace, 4, "qaer2%i", cmd->hdr.return_code); + return 0; + } + qdata = &cmd->data.setassparms.data.query_arp; + switch (qdata->reply_bits) { + case 5: + uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry5); + if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) + uentry_size = sizeof(struct qeth_arp_qi_entry5_short); + break; + case 7: + /* fall through to default */ + default: + /* tr is the same as eth -> entry7 */ + uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry7); + if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) + uentry_size = sizeof(struct qeth_arp_qi_entry7_short); + break; + } + /* check if there is enough room in userspace */ + if ((qinfo->udata_len - qinfo->udata_offset) < + qdata->no_entries * uentry_size){ + QETH_DBF_TEXT_(trace, 4, "qaer3%i", -ENOMEM); + cmd->hdr.return_code = -ENOMEM; + PRINT_WARN("query ARP user space buffer is too small for " + "the returned number of ARP entries. " + "Aborting query!\n"); + goto out_error; + } + QETH_DBF_TEXT_(trace, 4, "anore%i", + cmd->data.setassparms.hdr.number_of_replies); + QETH_DBF_TEXT_(trace, 4, "aseqn%i", cmd->data.setassparms.hdr.seq_no); + QETH_DBF_TEXT_(trace, 4, "anoen%i", qdata->no_entries); + + if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) { + /* strip off "media specific information" */ + qeth_l3_copy_arp_entries_stripped(qinfo, qdata, entry_size, + uentry_size); + } else + /*copy entries to user buffer*/ + memcpy(qinfo->udata + qinfo->udata_offset, + (char *)&qdata->data, qdata->no_entries*uentry_size); + + qinfo->no_entries += qdata->no_entries; + qinfo->udata_offset += (qdata->no_entries*uentry_size); + /* check if all replies received ... */ + if (cmd->data.setassparms.hdr.seq_no < + cmd->data.setassparms.hdr.number_of_replies) + return 1; + memcpy(qinfo->udata, &qinfo->no_entries, 4); + /* keep STRIP_ENTRIES flag so the user program can distinguish + * stripped entries from normal ones */ + if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) + qdata->reply_bits |= QETH_QARP_STRIP_ENTRIES; + memcpy(qinfo->udata + QETH_QARP_MASK_OFFSET, &qdata->reply_bits, 2); + return 0; +out_error: + i = 0; + memcpy(qinfo->udata, &i, 4); + return 0; +} + +static int qeth_l3_send_ipa_arp_cmd(struct qeth_card *card, + struct qeth_cmd_buffer *iob, int len, + int (*reply_cb)(struct qeth_card *, struct qeth_reply *, + unsigned long), + void *reply_param) +{ + QETH_DBF_TEXT(trace, 4, "sendarp"); + + memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); + memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); + return qeth_send_control_data(card, IPA_PDU_HEADER_SIZE + len, iob, + reply_cb, reply_param); +} + +static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) +{ + struct qeth_cmd_buffer *iob; + struct qeth_arp_query_info qinfo = {0, }; + int tmp; + int rc; + + QETH_DBF_TEXT(trace, 3, "arpquery"); + + if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/ + IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + /* get size of userspace buffer and mask_bits -> 6 bytes */ + if (copy_from_user(&qinfo, udata, 6)) + return -EFAULT; + qinfo.udata = kzalloc(qinfo.udata_len, GFP_KERNEL); + if (!qinfo.udata) + return -ENOMEM; + qinfo.udata_offset = QETH_QARP_ENTRIES_OFFSET; + iob = qeth_l3_get_setassparms_cmd(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_ARP_QUERY_INFO, + sizeof(int), QETH_PROT_IPV4); + + rc = qeth_l3_send_ipa_arp_cmd(card, iob, + QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN, + qeth_l3_arp_query_cb, (void *)&qinfo); + if (rc) { + tmp = rc; + PRINT_WARN("Error while querying ARP cache on %s: %s " + "(0x%x/%d)\n", QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + if (copy_to_user(udata, qinfo.udata, 4)) + rc = -EFAULT; + } else { + if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) + rc = -EFAULT; + } + kfree(qinfo.udata); + return rc; +} + +static int qeth_l3_arp_add_entry(struct qeth_card *card, + struct qeth_arp_cache_entry *entry) +{ + struct qeth_cmd_buffer *iob; + char buf[16]; + int tmp; + int rc; + + QETH_DBF_TEXT(trace, 3, "arpadent"); + + /* + * currently GuestLAN only supports the ARP assist function + * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_ADD_ENTRY; + * thus we say EOPNOTSUPP for this ARP function + */ + if (card->info.guestlan) + return -EOPNOTSUPP; + if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + + iob = qeth_l3_get_setassparms_cmd(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_ARP_ADD_ENTRY, + sizeof(struct qeth_arp_cache_entry), + QETH_PROT_IPV4); + rc = qeth_l3_send_setassparms(card, iob, + sizeof(struct qeth_arp_cache_entry), + (unsigned long) entry, + qeth_l3_default_setassparms_cb, NULL); + if (rc) { + tmp = rc; + qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); + PRINT_WARN("Could not add ARP entry for address %s on %s: " + "%s (0x%x/%d)\n", + buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + } + return rc; +} + +static int qeth_l3_arp_remove_entry(struct qeth_card *card, + struct qeth_arp_cache_entry *entry) +{ + struct qeth_cmd_buffer *iob; + char buf[16] = {0, }; + int tmp; + int rc; + + QETH_DBF_TEXT(trace, 3, "arprment"); + + /* + * currently GuestLAN only supports the ARP assist function + * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY; + * thus we say EOPNOTSUPP for this ARP function + */ + if (card->info.guestlan) + return -EOPNOTSUPP; + if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + memcpy(buf, entry, 12); + iob = qeth_l3_get_setassparms_cmd(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_ARP_REMOVE_ENTRY, + 12, + QETH_PROT_IPV4); + rc = qeth_l3_send_setassparms(card, iob, + 12, (unsigned long)buf, + qeth_l3_default_setassparms_cb, NULL); + if (rc) { + tmp = rc; + memset(buf, 0, 16); + qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); + PRINT_WARN("Could not delete ARP entry for address %s on %s: " + "%s (0x%x/%d)\n", + buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + } + return rc; +} + +static int qeth_l3_arp_flush_cache(struct qeth_card *card) +{ + int rc; + int tmp; + + QETH_DBF_TEXT(trace, 3, "arpflush"); + + /* + * currently GuestLAN only supports the ARP assist function + * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_FLUSH_CACHE; + * thus we say EOPNOTSUPP for this ARP function + */ + if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD)) + return -EOPNOTSUPP; + if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { + PRINT_WARN("ARP processing not supported " + "on %s!\n", QETH_CARD_IFNAME(card)); + return -EOPNOTSUPP; + } + rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, + IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); + if (rc) { + tmp = rc; + PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n", + QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + } + return rc; +} + +static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct qeth_card *card = netdev_priv(dev); + struct qeth_arp_cache_entry arp_entry; + struct mii_ioctl_data *mii_data; + int rc = 0; + + if (!card) + return -ENODEV; + + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_SOFTSETUP)) + return -ENODEV; + + switch (cmd) { + case SIOC_QETH_ARP_SET_NO_ENTRIES: + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + rc = qeth_l3_arp_set_no_entries(card, rq->ifr_ifru.ifru_ivalue); + break; + case SIOC_QETH_ARP_QUERY_INFO: + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + rc = qeth_l3_arp_query(card, rq->ifr_ifru.ifru_data); + break; + case SIOC_QETH_ARP_ADD_ENTRY: + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, + sizeof(struct qeth_arp_cache_entry))) + rc = -EFAULT; + else + rc = qeth_l3_arp_add_entry(card, &arp_entry); + break; + case SIOC_QETH_ARP_REMOVE_ENTRY: + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, + sizeof(struct qeth_arp_cache_entry))) + rc = -EFAULT; + else + rc = qeth_l3_arp_remove_entry(card, &arp_entry); + break; + case SIOC_QETH_ARP_FLUSH_CACHE: + if (!capable(CAP_NET_ADMIN)) { + rc = -EPERM; + break; + } + rc = qeth_l3_arp_flush_cache(card); + break; + case SIOC_QETH_ADP_SET_SNMP_CONTROL: + rc = qeth_snmp_command(card, rq->ifr_ifru.ifru_data); + break; + case SIOC_QETH_GET_CARD_TYPE: + if ((card->info.type == QETH_CARD_TYPE_OSAE) && + !card->info.guestlan) + return 1; + return 0; + break; + case SIOCGMIIPHY: + mii_data = if_mii(rq); + mii_data->phy_id = 0; + break; + case SIOCGMIIREG: + mii_data = if_mii(rq); + if (mii_data->phy_id != 0) + rc = -EINVAL; + else + mii_data->val_out = qeth_mdio_read(dev, + mii_data->phy_id, + mii_data->reg_num); + break; + default: + rc = -EOPNOTSUPP; + } + if (rc) + QETH_DBF_TEXT_(trace, 2, "ioce%d", rc); + return rc; +} + +static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, + struct sk_buff *skb, int ipv, int cast_type) +{ + QETH_DBF_TEXT(trace, 6, "fillhdr"); + + memset(hdr, 0, sizeof(struct qeth_hdr)); + hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3; + hdr->hdr.l3.ext_flags = 0; + + /* + * before we're going to overwrite this location with next hop ip. + * v6 uses passthrough, v4 sets the tag in the QDIO header. + */ + if (card->vlangrp && vlan_tx_tag_present(skb)) { + hdr->hdr.l3.ext_flags = (ipv == 4) ? + QETH_HDR_EXT_VLAN_FRAME : + QETH_HDR_EXT_INCLUDE_VLAN_TAG; + hdr->hdr.l3.vlan_id = vlan_tx_tag_get(skb); + } + + hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr); + if (ipv == 4) { + /* IPv4 */ + hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags4(cast_type); + memset(hdr->hdr.l3.dest_addr, 0, 12); + if ((skb->dst) && (skb->dst->neighbour)) { + *((u32 *) (&hdr->hdr.l3.dest_addr[12])) = + *((u32 *) skb->dst->neighbour->primary_key); + } else { + /* fill in destination address used in ip header */ + *((u32 *) (&hdr->hdr.l3.dest_addr[12])) = + ip_hdr(skb)->daddr; + } + } else if (ipv == 6) { + /* IPv6 */ + hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags6(cast_type); + if (card->info.type == QETH_CARD_TYPE_IQD) + hdr->hdr.l3.flags &= ~QETH_HDR_PASSTHRU; + if ((skb->dst) && (skb->dst->neighbour)) { + memcpy(hdr->hdr.l3.dest_addr, + skb->dst->neighbour->primary_key, 16); + } else { + /* fill in destination address used in ip header */ + memcpy(hdr->hdr.l3.dest_addr, + &ipv6_hdr(skb)->daddr, 16); + } + } else { + /* passthrough */ + if ((skb->dev->type == ARPHRD_IEEE802_TR) && + !memcmp(skb->data + sizeof(struct qeth_hdr) + + sizeof(__u16), skb->dev->broadcast, 6)) { + hdr->hdr.l3.flags = QETH_CAST_BROADCAST | + QETH_HDR_PASSTHRU; + } else if (!memcmp(skb->data + sizeof(struct qeth_hdr), + skb->dev->broadcast, 6)) { + /* broadcast? */ + hdr->hdr.l3.flags = QETH_CAST_BROADCAST | + QETH_HDR_PASSTHRU; + } else { + hdr->hdr.l3.flags = (cast_type == RTN_MULTICAST) ? + QETH_CAST_MULTICAST | QETH_HDR_PASSTHRU : + QETH_CAST_UNICAST | QETH_HDR_PASSTHRU; + } + } +} + +static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + int rc; + u16 *tag; + struct qeth_hdr *hdr = NULL; + int elements_needed = 0; + struct qeth_card *card = netdev_priv(dev); + struct sk_buff *new_skb = NULL; + int ipv = qeth_get_ip_version(skb); + int cast_type = qeth_get_cast_type(card, skb); + struct qeth_qdio_out_q *queue = card->qdio.out_qs + [qeth_get_priority_queue(card, skb, ipv, cast_type)]; + int tx_bytes = skb->len; + enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; + struct qeth_eddp_context *ctx = NULL; + + QETH_DBF_TEXT(trace, 6, "l3xmit"); + + if ((card->info.type == QETH_CARD_TYPE_IQD) && + (skb->protocol != htons(ETH_P_IPV6)) && + (skb->protocol != htons(ETH_P_IP))) + goto tx_drop; + + if ((card->state != CARD_STATE_UP) || !card->lan_online) { + card->stats.tx_carrier_errors++; + goto tx_drop; + } + + if ((cast_type == RTN_BROADCAST) && + (card->info.broadcast_capable == 0)) + goto tx_drop; + + if (card->options.performance_stats) { + card->perf_stats.outbound_cnt++; + card->perf_stats.outbound_start_time = qeth_get_micros(); + } + + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + + VLAN_HLEN); + if (!new_skb) + goto tx_drop; + + if (card->info.type == QETH_CARD_TYPE_IQD) { + skb_pull(new_skb, ETH_HLEN); + } else { + if (new_skb->protocol == htons(ETH_P_IP)) { + if (card->dev->type == ARPHRD_IEEE802_TR) + skb_pull(new_skb, TR_HLEN); + else + skb_pull(new_skb, ETH_HLEN); + } + + if (new_skb->protocol == ETH_P_IPV6 && card->vlangrp && + vlan_tx_tag_present(new_skb)) { + skb_push(new_skb, VLAN_HLEN); + skb_copy_to_linear_data(new_skb, new_skb->data + 4, 4); + skb_copy_to_linear_data_offset(new_skb, 4, + new_skb->data + 8, 4); + skb_copy_to_linear_data_offset(new_skb, 8, + new_skb->data + 12, 4); + tag = (u16 *)(new_skb->data + 12); + *tag = __constant_htons(ETH_P_8021Q); + *(tag + 1) = htons(vlan_tx_tag_get(new_skb)); + VLAN_TX_SKB_CB(new_skb)->magic = 0; + } + } + + netif_stop_queue(dev); + + if (skb_is_gso(new_skb)) + large_send = card->options.large_send; + + /* fix hardware limitation: as long as we do not have sbal + * chaining we can not send long frag lists so we temporary + * switch to EDDP + */ + if ((large_send == QETH_LARGE_SEND_TSO) && + ((skb_shinfo(new_skb)->nr_frags + 2) > 16)) + large_send = QETH_LARGE_SEND_EDDP; + + if ((large_send == QETH_LARGE_SEND_TSO) && + (cast_type == RTN_UNSPEC)) { + hdr = (struct qeth_hdr *)skb_push(new_skb, + sizeof(struct qeth_hdr_tso)); + memset(hdr, 0, sizeof(struct qeth_hdr_tso)); + qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type); + qeth_tso_fill_header(card, hdr, new_skb); + elements_needed++; + } else { + hdr = (struct qeth_hdr *)skb_push(new_skb, + sizeof(struct qeth_hdr)); + qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type); + } + + if (large_send == QETH_LARGE_SEND_EDDP) { + /* new_skb is not owned by a socket so we use skb to get + * the protocol + */ + ctx = qeth_eddp_create_context(card, new_skb, hdr, + skb->sk->sk_protocol); + if (ctx == NULL) { + PRINT_WARN("could not create eddp context\n"); + goto tx_drop; + } + } else { + int elems = qeth_get_elements_no(card, (void *)hdr, new_skb, + elements_needed); + if (!elems) + goto tx_drop; + elements_needed += elems; + } + + if ((large_send == QETH_LARGE_SEND_NO) && + (new_skb->ip_summed == CHECKSUM_PARTIAL)) + qeth_tx_csum(new_skb); + + if (card->info.type != QETH_CARD_TYPE_IQD) + rc = qeth_do_send_packet(card, queue, new_skb, hdr, + elements_needed, ctx); + else + rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, + elements_needed, ctx); + + if (!rc) { + card->stats.tx_packets++; + card->stats.tx_bytes += tx_bytes; + if (new_skb != skb) + dev_kfree_skb_any(skb); + if (card->options.performance_stats) { + if (large_send != QETH_LARGE_SEND_NO) { + card->perf_stats.large_send_bytes += tx_bytes; + card->perf_stats.large_send_cnt++; + } + if (skb_shinfo(new_skb)->nr_frags > 0) { + card->perf_stats.sg_skbs_sent++; + /* nr_frags + skb->data */ + card->perf_stats.sg_frags_sent += + skb_shinfo(new_skb)->nr_frags + 1; + } + } + + if (ctx != NULL) { + qeth_eddp_put_context(ctx); + dev_kfree_skb_any(new_skb); + } + } else { + if (ctx != NULL) + qeth_eddp_put_context(ctx); + + if (rc == -EBUSY) { + if (new_skb != skb) + dev_kfree_skb_any(new_skb); + return NETDEV_TX_BUSY; + } else + goto tx_drop; + } + + netif_wake_queue(dev); + if (card->options.performance_stats) + card->perf_stats.outbound_time += qeth_get_micros() - + card->perf_stats.outbound_start_time; + return rc; + +tx_drop: + card->stats.tx_dropped++; + card->stats.tx_errors++; + if ((new_skb != skb) && new_skb) + dev_kfree_skb_any(new_skb); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static int qeth_l3_open(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 4, "qethopen"); + if (card->state != CARD_STATE_SOFTSETUP) + return -ENODEV; + card->data.state = CH_STATE_UP; + card->state = CARD_STATE_UP; + card->dev->flags |= IFF_UP; + netif_start_queue(dev); + + if (!card->lan_online && netif_carrier_ok(dev)) + netif_carrier_off(dev); + return 0; +} + +static int qeth_l3_stop(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + QETH_DBF_TEXT(trace, 4, "qethstop"); + netif_tx_disable(dev); + card->dev->flags &= ~IFF_UP; + if (card->state == CARD_STATE_UP) + card->state = CARD_STATE_SOFTSETUP; + return 0; +} + +static u32 qeth_l3_ethtool_get_rx_csum(struct net_device *dev) +{ + struct qeth_card *card = netdev_priv(dev); + + return (card->options.checksum_type == HW_CHECKSUMMING); +} + +static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data) +{ + struct qeth_card *card = netdev_priv(dev); + enum qeth_card_states old_state; + enum qeth_checksum_types csum_type; + + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_DOWN)) + return -EPERM; + + if (data) + csum_type = HW_CHECKSUMMING; + else + csum_type = SW_CHECKSUMMING; + + if (card->options.checksum_type != csum_type) { + old_state = card->state; + if (card->state == CARD_STATE_UP) + __qeth_l3_set_offline(card->gdev, 1); + card->options.checksum_type = csum_type; + if (old_state == CARD_STATE_UP) + __qeth_l3_set_online(card->gdev, 1); + } + return 0; +} + +static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data) +{ + struct qeth_card *card = netdev_priv(dev); + + if (data) { + if (card->options.large_send == QETH_LARGE_SEND_NO) { + if (card->info.type == QETH_CARD_TYPE_IQD) + card->options.large_send = QETH_LARGE_SEND_EDDP; + else + card->options.large_send = QETH_LARGE_SEND_TSO; + dev->features |= NETIF_F_TSO; + } + } else { + dev->features &= ~NETIF_F_TSO; + card->options.large_send = QETH_LARGE_SEND_NO; + } + return 0; +} + +static struct ethtool_ops qeth_l3_ethtool_ops = { + .get_link = ethtool_op_get_link, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_hw_csum, + .get_rx_csum = qeth_l3_ethtool_get_rx_csum, + .set_rx_csum = qeth_l3_ethtool_set_rx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = qeth_l3_ethtool_set_tso, + .get_strings = qeth_core_get_strings, + .get_ethtool_stats = qeth_core_get_ethtool_stats, + .get_stats_count = qeth_core_get_stats_count, + .get_drvinfo = qeth_core_get_drvinfo, +}; + +/* + * we need NOARP for IPv4 but we want neighbor solicitation for IPv6. Setting + * NOARP on the netdevice is no option because it also turns off neighbor + * solicitation. For IPv4 we install a neighbor_setup function. We don't want + * arp resolution but we want the hard header (packet socket will work + * e.g. tcpdump) + */ +static int qeth_l3_neigh_setup_noarp(struct neighbour *n) +{ + n->nud_state = NUD_NOARP; + memcpy(n->ha, "FAKELL", 6); + n->output = n->ops->connected_output; + return 0; +} + +static int +qeth_l3_neigh_setup(struct net_device *dev, struct neigh_parms *np) +{ + if (np->tbl->family == AF_INET) + np->neigh_setup = qeth_l3_neigh_setup_noarp; + + return 0; +} + +static int qeth_l3_setup_netdev(struct qeth_card *card) +{ + if (card->info.type == QETH_CARD_TYPE_OSAE) { + if ((card->info.link_type == QETH_LINK_TYPE_LANE_TR) || + (card->info.link_type == QETH_LINK_TYPE_HSTR)) { +#ifdef CONFIG_TR + card->dev = alloc_trdev(0); +#endif + if (!card->dev) + return -ENODEV; + } else { + card->dev = alloc_etherdev(0); + if (!card->dev) + return -ENODEV; + card->dev->neigh_setup = qeth_l3_neigh_setup; + + /*IPv6 address autoconfiguration stuff*/ + qeth_l3_get_unique_id(card); + if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD)) + card->dev->dev_id = card->info.unique_id & + 0xffff; + } + } else if (card->info.type == QETH_CARD_TYPE_IQD) { + card->dev = alloc_netdev(0, "hsi%d", ether_setup); + if (!card->dev) + return -ENODEV; + card->dev->flags |= IFF_NOARP; + qeth_l3_iqd_read_initial_mac(card); + } else + return -ENODEV; + + card->dev->hard_start_xmit = qeth_l3_hard_start_xmit; + card->dev->priv = card; + card->dev->tx_timeout = &qeth_tx_timeout; + card->dev->watchdog_timeo = QETH_TX_TIMEOUT; + card->dev->open = qeth_l3_open; + card->dev->stop = qeth_l3_stop; + card->dev->do_ioctl = qeth_l3_do_ioctl; + card->dev->get_stats = qeth_get_stats; + card->dev->change_mtu = qeth_change_mtu; + card->dev->set_multicast_list = qeth_l3_set_multicast_list; + card->dev->vlan_rx_register = qeth_l3_vlan_rx_register; + card->dev->vlan_rx_add_vid = qeth_l3_vlan_rx_add_vid; + card->dev->vlan_rx_kill_vid = qeth_l3_vlan_rx_kill_vid; + card->dev->mtu = card->info.initial_mtu; + SET_ETHTOOL_OPS(card->dev, &qeth_l3_ethtool_ops); + card->dev->features |= NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + + SET_NETDEV_DEV(card->dev, &card->gdev->dev); + return register_netdev(card->dev); +} + +static void qeth_l3_qdio_input_handler(struct ccw_device *ccwdev, + unsigned int status, unsigned int qdio_err, + unsigned int siga_err, unsigned int queue, int first_element, + int count, unsigned long card_ptr) +{ + struct net_device *net_dev; + struct qeth_card *card; + struct qeth_qdio_buffer *buffer; + int index; + int i; + + QETH_DBF_TEXT(trace, 6, "qdinput"); + card = (struct qeth_card *) card_ptr; + net_dev = card->dev; + if (card->options.performance_stats) { + card->perf_stats.inbound_cnt++; + card->perf_stats.inbound_start_time = qeth_get_micros(); + } + if (status & QDIO_STATUS_LOOK_FOR_ERROR) { + if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(trace, 1, "qdinchk"); + QETH_DBF_TEXT_(trace, 1, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(trace, 1, "%04X%04X", + first_element, count); + QETH_DBF_TEXT_(trace, 1, "%04X%04X", queue, status); + qeth_schedule_recovery(card); + return; + } + } + for (i = first_element; i < (first_element + count); ++i) { + index = i % QDIO_MAX_BUFFERS_PER_Q; + buffer = &card->qdio.in_q->bufs[index]; + if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && + qeth_check_qdio_errors(buffer->buffer, + qdio_err, siga_err, "qinerr"))) + qeth_l3_process_inbound_buffer(card, buffer, index); + /* clear buffer and give back to hardware */ + qeth_put_buffer_pool_entry(card, buffer->pool_entry); + qeth_queue_input_buffer(card, index); + } + if (card->options.performance_stats) + card->perf_stats.inbound_time += qeth_get_micros() - + card->perf_stats.inbound_start_time; +} + +static int qeth_l3_probe_device(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + + qeth_l3_create_device_attributes(&gdev->dev); + card->options.layer2 = 0; + card->discipline.input_handler = (qdio_handler_t *) + qeth_l3_qdio_input_handler; + card->discipline.output_handler = (qdio_handler_t *) + qeth_qdio_output_handler; + card->discipline.recover = qeth_l3_recover; + return 0; +} + +static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) +{ + struct qeth_card *card = dev_get_drvdata(&cgdev->dev); + + wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0); + + if (cgdev->state == CCWGROUP_ONLINE) { + card->use_hard_stop = 1; + qeth_l3_set_offline(cgdev); + } + + if (card->dev) { + unregister_netdev(card->dev); + card->dev = NULL; + } + + qeth_l3_remove_device_attributes(&cgdev->dev); + qeth_l3_clear_ip_list(card, 0, 0); + qeth_l3_clear_ipato_list(card); + return; +} + +static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + int rc = 0; + enum qeth_card_states recover_flag; + + BUG_ON(!card); + QETH_DBF_TEXT(setup, 2, "setonlin"); + QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); + + qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); + if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { + PRINT_WARN("set_online of card %s interrupted by user!\n", + CARD_BUS_ID(card)); + return -ERESTARTSYS; + } + + recover_flag = card->state; + rc = ccw_device_set_online(CARD_RDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + rc = ccw_device_set_online(CARD_WDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + rc = ccw_device_set_online(CARD_DDEV(card)); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + return -EIO; + } + + rc = qeth_core_hardsetup_card(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + goto out_remove; + } + + qeth_l3_query_ipassists(card, QETH_PROT_IPV4); + + if (!card->dev && qeth_l3_setup_netdev(card)) + goto out_remove; + + card->state = CARD_STATE_HARDSETUP; + qeth_print_status_message(card); + + /* softsetup */ + QETH_DBF_TEXT(setup, 2, "softsetp"); + + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + if (rc == 0xe080) { + PRINT_WARN("LAN on card %s if offline! " + "Waiting for STARTLAN from card.\n", + CARD_BUS_ID(card)); + card->lan_online = 0; + } + return rc; + } else + card->lan_online = 1; + qeth_set_large_send(card, card->options.large_send); + + rc = qeth_l3_setadapter_parms(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); + rc = qeth_l3_start_ipassists(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + rc = qeth_l3_setrouting_v4(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "4err%d", rc); + rc = qeth_l3_setrouting_v6(card); + if (rc) + QETH_DBF_TEXT_(setup, 2, "5err%d", rc); + netif_tx_disable(card->dev); + + rc = qeth_init_qdio_queues(card); + if (rc) { + QETH_DBF_TEXT_(setup, 2, "6err%d", rc); + goto out_remove; + } + card->state = CARD_STATE_SOFTSETUP; + netif_carrier_on(card->dev); + + qeth_set_allowed_threads(card, 0xffffffff, 0); + if ((recover_flag == CARD_STATE_RECOVER) && recovery_mode) { + qeth_l3_open(card->dev); + qeth_l3_set_multicast_list(card->dev); + } + /* let user_space know that device is online */ + kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE); + return 0; +out_remove: + card->use_hard_stop = 1; + qeth_l3_stop_card(card, 0); + ccw_device_set_offline(CARD_DDEV(card)); + ccw_device_set_offline(CARD_WDEV(card)); + ccw_device_set_offline(CARD_RDEV(card)); + if (recover_flag == CARD_STATE_RECOVER) + card->state = CARD_STATE_RECOVER; + else + card->state = CARD_STATE_DOWN; + return -ENODEV; +} + +static int qeth_l3_set_online(struct ccwgroup_device *gdev) +{ + return __qeth_l3_set_online(gdev, 0); +} + +static int __qeth_l3_set_offline(struct ccwgroup_device *cgdev, + int recovery_mode) +{ + struct qeth_card *card = dev_get_drvdata(&cgdev->dev); + int rc = 0, rc2 = 0, rc3 = 0; + enum qeth_card_states recover_flag; + + QETH_DBF_TEXT(setup, 3, "setoffl"); + QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); + + if (card->dev && netif_carrier_ok(card->dev)) + netif_carrier_off(card->dev); + recover_flag = card->state; + if (qeth_l3_stop_card(card, recovery_mode) == -ERESTARTSYS) { + PRINT_WARN("Stopping card %s interrupted by user!\n", + CARD_BUS_ID(card)); + return -ERESTARTSYS; + } + rc = ccw_device_set_offline(CARD_DDEV(card)); + rc2 = ccw_device_set_offline(CARD_WDEV(card)); + rc3 = ccw_device_set_offline(CARD_RDEV(card)); + if (!rc) + rc = (rc2) ? rc2 : rc3; + if (rc) + QETH_DBF_TEXT_(setup, 2, "1err%d", rc); + if (recover_flag == CARD_STATE_UP) + card->state = CARD_STATE_RECOVER; + /* let user_space know that device is offline */ + kobject_uevent(&cgdev->dev.kobj, KOBJ_CHANGE); + return 0; +} + +static int qeth_l3_set_offline(struct ccwgroup_device *cgdev) +{ + return __qeth_l3_set_offline(cgdev, 0); +} + +static int qeth_l3_recover(void *ptr) +{ + struct qeth_card *card; + int rc = 0; + + card = (struct qeth_card *) ptr; + QETH_DBF_TEXT(trace, 2, "recover1"); + QETH_DBF_HEX(trace, 2, &card, sizeof(void *)); + if (!qeth_do_run_thread(card, QETH_RECOVER_THREAD)) + return 0; + QETH_DBF_TEXT(trace, 2, "recover2"); + PRINT_WARN("Recovery of device %s started ...\n", + CARD_BUS_ID(card)); + card->use_hard_stop = 1; + __qeth_l3_set_offline(card->gdev, 1); + rc = __qeth_l3_set_online(card->gdev, 1); + /* don't run another scheduled recovery */ + qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); + qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); + if (!rc) + PRINT_INFO("Device %s successfully recovered!\n", + CARD_BUS_ID(card)); + else + PRINT_INFO("Device %s could not be recovered!\n", + CARD_BUS_ID(card)); + return 0; +} + +static void qeth_l3_shutdown(struct ccwgroup_device *gdev) +{ + struct qeth_card *card = dev_get_drvdata(&gdev->dev); + qeth_l3_clear_ip_list(card, 0, 0); + qeth_qdio_clear_card(card, 0); + qeth_clear_qdio_buffers(card); +} + +struct ccwgroup_driver qeth_l3_ccwgroup_driver = { + .probe = qeth_l3_probe_device, + .remove = qeth_l3_remove_device, + .set_online = qeth_l3_set_online, + .set_offline = qeth_l3_set_offline, + .shutdown = qeth_l3_shutdown, +}; +EXPORT_SYMBOL_GPL(qeth_l3_ccwgroup_driver); + +static int qeth_l3_ip_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; + struct net_device *dev = (struct net_device *)ifa->ifa_dev->dev; + struct qeth_ipaddr *addr; + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 3, "ipevent"); + card = qeth_l3_get_card_from_dev(dev); + if (!card) + return NOTIFY_DONE; + + addr = qeth_l3_get_addr_buffer(QETH_PROT_IPV4); + if (addr != NULL) { + addr->u.a4.addr = ifa->ifa_address; + addr->u.a4.mask = ifa->ifa_mask; + addr->type = QETH_IP_TYPE_NORMAL; + } else + goto out; + + switch (event) { + case NETDEV_UP: + if (!qeth_l3_add_ip(card, addr)) + kfree(addr); + break; + case NETDEV_DOWN: + if (!qeth_l3_delete_ip(card, addr)) + kfree(addr); + break; + default: + break; + } + qeth_l3_set_ip_addr_list(card); +out: + return NOTIFY_DONE; +} + +static struct notifier_block qeth_l3_ip_notifier = { + qeth_l3_ip_event, + NULL, +}; + +#ifdef CONFIG_QETH_IPV6 +/** + * IPv6 event handler + */ +static int qeth_l3_ip6_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; + struct net_device *dev = (struct net_device *)ifa->idev->dev; + struct qeth_ipaddr *addr; + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 3, "ip6event"); + + card = qeth_l3_get_card_from_dev(dev); + if (!card) + return NOTIFY_DONE; + if (!qeth_is_supported(card, IPA_IPV6)) + return NOTIFY_DONE; + + addr = qeth_l3_get_addr_buffer(QETH_PROT_IPV6); + if (addr != NULL) { + memcpy(&addr->u.a6.addr, &ifa->addr, sizeof(struct in6_addr)); + addr->u.a6.pfxlen = ifa->prefix_len; + addr->type = QETH_IP_TYPE_NORMAL; + } else + goto out; + + switch (event) { + case NETDEV_UP: + if (!qeth_l3_add_ip(card, addr)) + kfree(addr); + break; + case NETDEV_DOWN: + if (!qeth_l3_delete_ip(card, addr)) + kfree(addr); + break; + default: + break; + } + qeth_l3_set_ip_addr_list(card); +out: + return NOTIFY_DONE; +} + +static struct notifier_block qeth_l3_ip6_notifier = { + qeth_l3_ip6_event, + NULL, +}; +#endif + +static int qeth_l3_register_notifiers(void) +{ + int rc; + + QETH_DBF_TEXT(trace, 5, "regnotif"); + rc = register_inetaddr_notifier(&qeth_l3_ip_notifier); + if (rc) + return rc; +#ifdef CONFIG_QETH_IPV6 + rc = register_inet6addr_notifier(&qeth_l3_ip6_notifier); + if (rc) { + unregister_inetaddr_notifier(&qeth_l3_ip_notifier); + return rc; + } +#else + PRINT_WARN("layer 3 discipline no IPv6 support\n"); +#endif + return 0; +} + +static void qeth_l3_unregister_notifiers(void) +{ + + QETH_DBF_TEXT(trace, 5, "unregnot"); + BUG_ON(unregister_inetaddr_notifier(&qeth_l3_ip_notifier)); +#ifdef CONFIG_QETH_IPV6 + BUG_ON(unregister_inet6addr_notifier(&qeth_l3_ip6_notifier)); +#endif /* QETH_IPV6 */ +} + +static int __init qeth_l3_init(void) +{ + int rc = 0; + + PRINT_INFO("register layer 3 discipline\n"); + rc = qeth_l3_register_notifiers(); + return rc; +} + +static void __exit qeth_l3_exit(void) +{ + qeth_l3_unregister_notifiers(); + PRINT_INFO("unregister layer 3 discipline\n"); +} + +module_init(qeth_l3_init); +module_exit(qeth_l3_exit); +MODULE_AUTHOR("Frank Blaschka "); +MODULE_DESCRIPTION("qeth layer 3 discipline"); +MODULE_LICENSE("GPL"); diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c new file mode 100644 index 0000000..08f51fd --- /dev/null +++ b/drivers/s390/net/qeth_l3_sys.c @@ -0,0 +1,1051 @@ +/* + * drivers/s390/net/qeth_l3_sys.c + * + * Copyright IBM Corp. 2007 + * Author(s): Utz Bacher , + * Frank Pavlic , + * Thomas Spatzier , + * Frank Blaschka + */ + +#include "qeth_l3.h" + +#define QETH_DEVICE_ATTR(_id, _name, _mode, _show, _store) \ +struct device_attribute dev_attr_##_id = __ATTR(_name, _mode, _show, _store) + +static const char *qeth_l3_get_checksum_str(struct qeth_card *card) +{ + if (card->options.checksum_type == SW_CHECKSUMMING) + return "sw"; + else if (card->options.checksum_type == HW_CHECKSUMMING) + return "hw"; + else + return "no"; +} + +static ssize_t qeth_l3_dev_route_show(struct qeth_card *card, + struct qeth_routing_info *route, char *buf) +{ + switch (route->type) { + case PRIMARY_ROUTER: + return sprintf(buf, "%s\n", "primary router"); + case SECONDARY_ROUTER: + return sprintf(buf, "%s\n", "secondary router"); + case MULTICAST_ROUTER: + if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) + return sprintf(buf, "%s\n", "multicast router+"); + else + return sprintf(buf, "%s\n", "multicast router"); + case PRIMARY_CONNECTOR: + if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) + return sprintf(buf, "%s\n", "primary connector+"); + else + return sprintf(buf, "%s\n", "primary connector"); + case SECONDARY_CONNECTOR: + if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) + return sprintf(buf, "%s\n", "secondary connector+"); + else + return sprintf(buf, "%s\n", "secondary connector"); + default: + return sprintf(buf, "%s\n", "no"); + } +} + +static ssize_t qeth_l3_dev_route4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_route_show(card, &card->options.route4, buf); +} + +static ssize_t qeth_l3_dev_route_store(struct qeth_card *card, + struct qeth_routing_info *route, enum qeth_prot_versions prot, + const char *buf, size_t count) +{ + enum qeth_routing_types old_route_type = route->type; + char *tmp; + int rc; + + tmp = strsep((char **) &buf, "\n"); + + if (!strcmp(tmp, "no_router")) { + route->type = NO_ROUTER; + } else if (!strcmp(tmp, "primary_connector")) { + route->type = PRIMARY_CONNECTOR; + } else if (!strcmp(tmp, "secondary_connector")) { + route->type = SECONDARY_CONNECTOR; + } else if (!strcmp(tmp, "primary_router")) { + route->type = PRIMARY_ROUTER; + } else if (!strcmp(tmp, "secondary_router")) { + route->type = SECONDARY_ROUTER; + } else if (!strcmp(tmp, "multicast_router")) { + route->type = MULTICAST_ROUTER; + } else { + PRINT_WARN("Invalid routing type '%s'.\n", tmp); + return -EINVAL; + } + if (((card->state == CARD_STATE_SOFTSETUP) || + (card->state == CARD_STATE_UP)) && + (old_route_type != route->type)) { + if (prot == QETH_PROT_IPV4) + rc = qeth_l3_setrouting_v4(card); + else if (prot == QETH_PROT_IPV6) + rc = qeth_l3_setrouting_v6(card); + } + return count; +} + +static ssize_t qeth_l3_dev_route4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_route_store(card, &card->options.route4, + QETH_PROT_IPV4, buf, count); +} + +static DEVICE_ATTR(route4, 0644, qeth_l3_dev_route4_show, + qeth_l3_dev_route4_store); + +static ssize_t qeth_l3_dev_route6_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + if (!qeth_is_supported(card, IPA_IPV6)) + return sprintf(buf, "%s\n", "n/a"); + + return qeth_l3_dev_route_show(card, &card->options.route6, buf); +} + +static ssize_t qeth_l3_dev_route6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + if (!qeth_is_supported(card, IPA_IPV6)) { + PRINT_WARN("IPv6 not supported for interface %s.\n" + "Routing status no changed.\n", + QETH_CARD_IFNAME(card)); + return -ENOTSUPP; + } + + return qeth_l3_dev_route_store(card, &card->options.route6, + QETH_PROT_IPV6, buf, count); +} + +static DEVICE_ATTR(route6, 0644, qeth_l3_dev_route6_show, + qeth_l3_dev_route6_store); + +static ssize_t qeth_l3_dev_fake_broadcast_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->options.fake_broadcast? 1:0); +} + +static ssize_t qeth_l3_dev_fake_broadcast_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + i = simple_strtoul(buf, &tmp, 16); + if ((i == 0) || (i == 1)) + card->options.fake_broadcast = i; + else { + PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n"); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(fake_broadcast, 0644, qeth_l3_dev_fake_broadcast_show, + qeth_l3_dev_fake_broadcast_store); + +static ssize_t qeth_l3_dev_broadcast_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || + (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) + return sprintf(buf, "n/a\n"); + + return sprintf(buf, "%s\n", (card->options.broadcast_mode == + QETH_TR_BROADCAST_ALLRINGS)? + "all rings":"local"); +} + +static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || + (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { + PRINT_WARN("Device is not a tokenring device!\n"); + return -EINVAL; + } + + tmp = strsep((char **) &buf, "\n"); + + if (!strcmp(tmp, "local")) { + card->options.broadcast_mode = QETH_TR_BROADCAST_LOCAL; + return count; + } else if (!strcmp(tmp, "all_rings")) { + card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; + return count; + } else { + PRINT_WARN("broadcast_mode: invalid mode %s!\n", + tmp); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(broadcast_mode, 0644, qeth_l3_dev_broadcast_mode_show, + qeth_l3_dev_broadcast_mode_store); + +static ssize_t qeth_l3_dev_canonical_macaddr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || + (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) + return sprintf(buf, "n/a\n"); + + return sprintf(buf, "%i\n", (card->options.macaddr_mode == + QETH_TR_MACADDR_CANONICAL)? 1:0); +} + +static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + int i; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || + (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { + PRINT_WARN("Device is not a tokenring device!\n"); + return -EINVAL; + } + + i = simple_strtoul(buf, &tmp, 16); + if ((i == 0) || (i == 1)) + card->options.macaddr_mode = i? + QETH_TR_MACADDR_CANONICAL : + QETH_TR_MACADDR_NONCANONICAL; + else { + PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n"); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(canonical_macaddr, 0644, qeth_l3_dev_canonical_macaddr_show, + qeth_l3_dev_canonical_macaddr_store); + +static ssize_t qeth_l3_dev_checksum_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%s checksumming\n", + qeth_l3_get_checksum_str(card)); +} + +static ssize_t qeth_l3_dev_checksum_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "sw_checksumming")) + card->options.checksum_type = SW_CHECKSUMMING; + else if (!strcmp(tmp, "hw_checksumming")) + card->options.checksum_type = HW_CHECKSUMMING; + else if (!strcmp(tmp, "no_checksumming")) + card->options.checksum_type = NO_CHECKSUMMING; + else { + PRINT_WARN("Unknown checksumming type '%s'\n", tmp); + return -EINVAL; + } + return count; +} + +static DEVICE_ATTR(checksumming, 0644, qeth_l3_dev_checksum_show, + qeth_l3_dev_checksum_store); + +static struct attribute *qeth_l3_device_attrs[] = { + &dev_attr_route4.attr, + &dev_attr_route6.attr, + &dev_attr_fake_broadcast.attr, + &dev_attr_broadcast_mode.attr, + &dev_attr_canonical_macaddr.attr, + &dev_attr_checksumming.attr, + NULL, +}; + +static struct attribute_group qeth_l3_device_attr_group = { + .attrs = qeth_l3_device_attrs, +}; + +static ssize_t qeth_l3_dev_ipato_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->ipato.enabled? 1:0); +} + +static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + if ((card->state != CARD_STATE_DOWN) && + (card->state != CARD_STATE_RECOVER)) + return -EPERM; + + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "toggle")) { + card->ipato.enabled = (card->ipato.enabled)? 0 : 1; + } else if (!strcmp(tmp, "1")) { + card->ipato.enabled = 1; + } else if (!strcmp(tmp, "0")) { + card->ipato.enabled = 0; + } else { + PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to " + "this file\n"); + return -EINVAL; + } + return count; +} + +static QETH_DEVICE_ATTR(ipato_enable, enable, 0644, + qeth_l3_dev_ipato_enable_show, + qeth_l3_dev_ipato_enable_store); + +static ssize_t qeth_l3_dev_ipato_invert4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->ipato.invert4? 1:0); +} + +static ssize_t qeth_l3_dev_ipato_invert4_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "toggle")) { + card->ipato.invert4 = (card->ipato.invert4)? 0 : 1; + } else if (!strcmp(tmp, "1")) { + card->ipato.invert4 = 1; + } else if (!strcmp(tmp, "0")) { + card->ipato.invert4 = 0; + } else { + PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to " + "this file\n"); + return -EINVAL; + } + return count; +} + +static QETH_DEVICE_ATTR(ipato_invert4, invert4, 0644, + qeth_l3_dev_ipato_invert4_show, + qeth_l3_dev_ipato_invert4_store); + +static ssize_t qeth_l3_dev_ipato_add_show(char *buf, struct qeth_card *card, + enum qeth_prot_versions proto) +{ + struct qeth_ipato_entry *ipatoe; + unsigned long flags; + char addr_str[40]; + int entry_len; /* length of 1 entry string, differs between v4 and v6 */ + int i = 0; + + entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; + /* add strlen for "/\n" */ + entry_len += (proto == QETH_PROT_IPV4)? 5 : 6; + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry(ipatoe, &card->ipato.entries, entry) { + if (ipatoe->proto != proto) + continue; + /* String must not be longer than PAGE_SIZE. So we check if + * string length gets near PAGE_SIZE. Then we can savely display + * the next IPv6 address (worst case, compared to IPv4) */ + if ((PAGE_SIZE - i) <= entry_len) + break; + qeth_l3_ipaddr_to_string(proto, ipatoe->addr, addr_str); + i += snprintf(buf + i, PAGE_SIZE - i, + "%s/%i\n", addr_str, ipatoe->mask_bits); + } + spin_unlock_irqrestore(&card->ip_lock, flags); + i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + + return i; +} + +static ssize_t qeth_l3_dev_ipato_add4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_add_show(buf, card, QETH_PROT_IPV4); +} + +static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, + u8 *addr, int *mask_bits) +{ + const char *start, *end; + char *tmp; + char buffer[40] = {0, }; + + start = buf; + /* get address string */ + end = strchr(start, '/'); + if (!end || (end - start >= 40)) { + PRINT_WARN("Invalid format for ipato_addx/delx. " + "Use /\n"); + return -EINVAL; + } + strncpy(buffer, start, end - start); + if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) { + PRINT_WARN("Invalid IP address format!\n"); + return -EINVAL; + } + start = end + 1; + *mask_bits = simple_strtoul(start, &tmp, 10); + if (!strlen(start) || + (tmp == start) || + (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) { + PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n"); + return -EINVAL; + } + return 0; +} + +static ssize_t qeth_l3_dev_ipato_add_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + struct qeth_ipato_entry *ipatoe; + u8 addr[16]; + int mask_bits; + int rc; + + rc = qeth_l3_parse_ipatoe(buf, proto, addr, &mask_bits); + if (rc) + return rc; + + ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL); + if (!ipatoe) { + PRINT_WARN("No memory to allocate ipato entry\n"); + return -ENOMEM; + } + ipatoe->proto = proto; + memcpy(ipatoe->addr, addr, (proto == QETH_PROT_IPV4)? 4:16); + ipatoe->mask_bits = mask_bits; + + rc = qeth_l3_add_ipato_entry(card, ipatoe); + if (rc) { + kfree(ipatoe); + return rc; + } + + return count; +} + +static ssize_t qeth_l3_dev_ipato_add4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_add_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(ipato_add4, add4, 0644, + qeth_l3_dev_ipato_add4_show, + qeth_l3_dev_ipato_add4_store); + +static ssize_t qeth_l3_dev_ipato_del_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + u8 addr[16]; + int mask_bits; + int rc; + + rc = qeth_l3_parse_ipatoe(buf, proto, addr, &mask_bits); + if (rc) + return rc; + + qeth_l3_del_ipato_entry(card, proto, addr, mask_bits); + + return count; +} + +static ssize_t qeth_l3_dev_ipato_del4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_del_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(ipato_del4, del4, 0200, NULL, + qeth_l3_dev_ipato_del4_store); + +static ssize_t qeth_l3_dev_ipato_invert6_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return sprintf(buf, "%i\n", card->ipato.invert6? 1:0); +} + +static ssize_t qeth_l3_dev_ipato_invert6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + char *tmp; + + if (!card) + return -EINVAL; + + tmp = strsep((char **) &buf, "\n"); + if (!strcmp(tmp, "toggle")) { + card->ipato.invert6 = (card->ipato.invert6)? 0 : 1; + } else if (!strcmp(tmp, "1")) { + card->ipato.invert6 = 1; + } else if (!strcmp(tmp, "0")) { + card->ipato.invert6 = 0; + } else { + PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to " + "this file\n"); + return -EINVAL; + } + return count; +} + +static QETH_DEVICE_ATTR(ipato_invert6, invert6, 0644, + qeth_l3_dev_ipato_invert6_show, + qeth_l3_dev_ipato_invert6_store); + + +static ssize_t qeth_l3_dev_ipato_add6_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_add_show(buf, card, QETH_PROT_IPV6); +} + +static ssize_t qeth_l3_dev_ipato_add6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_add_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(ipato_add6, add6, 0644, + qeth_l3_dev_ipato_add6_show, + qeth_l3_dev_ipato_add6_store); + +static ssize_t qeth_l3_dev_ipato_del6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_ipato_del_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(ipato_del6, del6, 0200, NULL, + qeth_l3_dev_ipato_del6_store); + +static struct attribute *qeth_ipato_device_attrs[] = { + &dev_attr_ipato_enable.attr, + &dev_attr_ipato_invert4.attr, + &dev_attr_ipato_add4.attr, + &dev_attr_ipato_del4.attr, + &dev_attr_ipato_invert6.attr, + &dev_attr_ipato_add6.attr, + &dev_attr_ipato_del6.attr, + NULL, +}; + +static struct attribute_group qeth_device_ipato_group = { + .name = "ipa_takeover", + .attrs = qeth_ipato_device_attrs, +}; + +static ssize_t qeth_l3_dev_vipa_add_show(char *buf, struct qeth_card *card, + enum qeth_prot_versions proto) +{ + struct qeth_ipaddr *ipaddr; + char addr_str[40]; + int entry_len; /* length of 1 entry string, differs between v4 and v6 */ + unsigned long flags; + int i = 0; + + entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; + entry_len += 2; /* \n + terminator */ + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry(ipaddr, &card->ip_list, entry) { + if (ipaddr->proto != proto) + continue; + if (ipaddr->type != QETH_IP_TYPE_VIPA) + continue; + /* String must not be longer than PAGE_SIZE. So we check if + * string length gets near PAGE_SIZE. Then we can savely display + * the next IPv6 address (worst case, compared to IPv4) */ + if ((PAGE_SIZE - i) <= entry_len) + break; + qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, + addr_str); + i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + } + spin_unlock_irqrestore(&card->ip_lock, flags); + i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + + return i; +} + +static ssize_t qeth_l3_dev_vipa_add4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_add_show(buf, card, QETH_PROT_IPV4); +} + +static int qeth_l3_parse_vipae(const char *buf, enum qeth_prot_versions proto, + u8 *addr) +{ + if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { + PRINT_WARN("Invalid IP address format!\n"); + return -EINVAL; + } + return 0; +} + +static ssize_t qeth_l3_dev_vipa_add_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + u8 addr[16] = {0, }; + int rc; + + rc = qeth_l3_parse_vipae(buf, proto, addr); + if (rc) + return rc; + + rc = qeth_l3_add_vipa(card, proto, addr); + if (rc) + return rc; + + return count; +} + +static ssize_t qeth_l3_dev_vipa_add4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_add_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(vipa_add4, add4, 0644, + qeth_l3_dev_vipa_add4_show, + qeth_l3_dev_vipa_add4_store); + +static ssize_t qeth_l3_dev_vipa_del_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + u8 addr[16]; + int rc; + + rc = qeth_l3_parse_vipae(buf, proto, addr); + if (rc) + return rc; + + qeth_l3_del_vipa(card, proto, addr); + + return count; +} + +static ssize_t qeth_l3_dev_vipa_del4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_del_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(vipa_del4, del4, 0200, NULL, + qeth_l3_dev_vipa_del4_store); + +static ssize_t qeth_l3_dev_vipa_add6_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_add_show(buf, card, QETH_PROT_IPV6); +} + +static ssize_t qeth_l3_dev_vipa_add6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_add_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(vipa_add6, add6, 0644, + qeth_l3_dev_vipa_add6_show, + qeth_l3_dev_vipa_add6_store); + +static ssize_t qeth_l3_dev_vipa_del6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_vipa_del_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(vipa_del6, del6, 0200, NULL, + qeth_l3_dev_vipa_del6_store); + +static struct attribute *qeth_vipa_device_attrs[] = { + &dev_attr_vipa_add4.attr, + &dev_attr_vipa_del4.attr, + &dev_attr_vipa_add6.attr, + &dev_attr_vipa_del6.attr, + NULL, +}; + +static struct attribute_group qeth_device_vipa_group = { + .name = "vipa", + .attrs = qeth_vipa_device_attrs, +}; + +static ssize_t qeth_l3_dev_rxip_add_show(char *buf, struct qeth_card *card, + enum qeth_prot_versions proto) +{ + struct qeth_ipaddr *ipaddr; + char addr_str[40]; + int entry_len; /* length of 1 entry string, differs between v4 and v6 */ + unsigned long flags; + int i = 0; + + entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; + entry_len += 2; /* \n + terminator */ + spin_lock_irqsave(&card->ip_lock, flags); + list_for_each_entry(ipaddr, &card->ip_list, entry) { + if (ipaddr->proto != proto) + continue; + if (ipaddr->type != QETH_IP_TYPE_RXIP) + continue; + /* String must not be longer than PAGE_SIZE. So we check if + * string length gets near PAGE_SIZE. Then we can savely display + * the next IPv6 address (worst case, compared to IPv4) */ + if ((PAGE_SIZE - i) <= entry_len) + break; + qeth_l3_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, + addr_str); + i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); + } + spin_unlock_irqrestore(&card->ip_lock, flags); + i += snprintf(buf + i, PAGE_SIZE - i, "\n"); + + return i; +} + +static ssize_t qeth_l3_dev_rxip_add4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_add_show(buf, card, QETH_PROT_IPV4); +} + +static int qeth_l3_parse_rxipe(const char *buf, enum qeth_prot_versions proto, + u8 *addr) +{ + if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { + PRINT_WARN("Invalid IP address format!\n"); + return -EINVAL; + } + return 0; +} + +static ssize_t qeth_l3_dev_rxip_add_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + u8 addr[16] = {0, }; + int rc; + + rc = qeth_l3_parse_rxipe(buf, proto, addr); + if (rc) + return rc; + + rc = qeth_l3_add_rxip(card, proto, addr); + if (rc) + return rc; + + return count; +} + +static ssize_t qeth_l3_dev_rxip_add4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_add_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(rxip_add4, add4, 0644, + qeth_l3_dev_rxip_add4_show, + qeth_l3_dev_rxip_add4_store); + +static ssize_t qeth_l3_dev_rxip_del_store(const char *buf, size_t count, + struct qeth_card *card, enum qeth_prot_versions proto) +{ + u8 addr[16]; + int rc; + + rc = qeth_l3_parse_rxipe(buf, proto, addr); + if (rc) + return rc; + + qeth_l3_del_rxip(card, proto, addr); + + return count; +} + +static ssize_t qeth_l3_dev_rxip_del4_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_del_store(buf, count, card, QETH_PROT_IPV4); +} + +static QETH_DEVICE_ATTR(rxip_del4, del4, 0200, NULL, + qeth_l3_dev_rxip_del4_store); + +static ssize_t qeth_l3_dev_rxip_add6_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_add_show(buf, card, QETH_PROT_IPV6); +} + +static ssize_t qeth_l3_dev_rxip_add6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_add_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(rxip_add6, add6, 0644, + qeth_l3_dev_rxip_add6_show, + qeth_l3_dev_rxip_add6_store); + +static ssize_t qeth_l3_dev_rxip_del6_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct qeth_card *card = dev_get_drvdata(dev); + + if (!card) + return -EINVAL; + + return qeth_l3_dev_rxip_del_store(buf, count, card, QETH_PROT_IPV6); +} + +static QETH_DEVICE_ATTR(rxip_del6, del6, 0200, NULL, + qeth_l3_dev_rxip_del6_store); + +static struct attribute *qeth_rxip_device_attrs[] = { + &dev_attr_rxip_add4.attr, + &dev_attr_rxip_del4.attr, + &dev_attr_rxip_add6.attr, + &dev_attr_rxip_del6.attr, + NULL, +}; + +static struct attribute_group qeth_device_rxip_group = { + .name = "rxip", + .attrs = qeth_rxip_device_attrs, +}; + +int qeth_l3_create_device_attributes(struct device *dev) +{ + int ret; + + ret = sysfs_create_group(&dev->kobj, &qeth_l3_device_attr_group); + if (ret) + return ret; + + ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group); + if (ret) { + sysfs_remove_group(&dev->kobj, &qeth_l3_device_attr_group); + return ret; + } + + ret = sysfs_create_group(&dev->kobj, &qeth_device_vipa_group); + if (ret) { + sysfs_remove_group(&dev->kobj, &qeth_l3_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); + return ret; + } + + ret = sysfs_create_group(&dev->kobj, &qeth_device_rxip_group); + if (ret) { + sysfs_remove_group(&dev->kobj, &qeth_l3_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); + sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); + return ret; + } + return 0; +} + +void qeth_l3_remove_device_attributes(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &qeth_l3_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); + sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); + sysfs_remove_group(&dev->kobj, &qeth_device_rxip_group); +} -- cgit v1.1 From 19a3da6c6e1e74ecac129a079139aaebb63fe6c8 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 15 Feb 2008 09:19:43 +0100 Subject: qeth: remove old qeth files Remove all obsolete qeth files. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth.h | 1253 ------ drivers/s390/net/qeth_eddp.c | 634 --- drivers/s390/net/qeth_eddp.h | 84 - drivers/s390/net/qeth_fs.h | 168 - drivers/s390/net/qeth_main.c | 8956 ------------------------------------------ drivers/s390/net/qeth_mpc.c | 269 -- drivers/s390/net/qeth_mpc.h | 583 --- drivers/s390/net/qeth_proc.c | 316 -- drivers/s390/net/qeth_sys.c | 1858 --------- drivers/s390/net/qeth_tso.h | 148 - 10 files changed, 14269 deletions(-) delete mode 100644 drivers/s390/net/qeth.h delete mode 100644 drivers/s390/net/qeth_eddp.c delete mode 100644 drivers/s390/net/qeth_eddp.h delete mode 100644 drivers/s390/net/qeth_fs.h delete mode 100644 drivers/s390/net/qeth_main.c delete mode 100644 drivers/s390/net/qeth_mpc.c delete mode 100644 drivers/s390/net/qeth_mpc.h delete mode 100644 drivers/s390/net/qeth_proc.c delete mode 100644 drivers/s390/net/qeth_sys.c delete mode 100644 drivers/s390/net/qeth_tso.h (limited to 'drivers') diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h deleted file mode 100644 index 8c6b72d..0000000 --- a/drivers/s390/net/qeth.h +++ /dev/null @@ -1,1253 +0,0 @@ -#ifndef __QETH_H__ -#define __QETH_H__ - -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - - -#include - -#include -#include -#include -#include - -#include "qeth_mpc.h" - -#ifdef CONFIG_QETH_IPV6 -#define QETH_VERSION_IPV6 ":IPv6" -#else -#define QETH_VERSION_IPV6 "" -#endif -#ifdef CONFIG_QETH_VLAN -#define QETH_VERSION_VLAN ":VLAN" -#else -#define QETH_VERSION_VLAN "" -#endif - -/** - * Debug Facility stuff - */ -#define QETH_DBF_SETUP_NAME "qeth_setup" -#define QETH_DBF_SETUP_LEN 8 -#define QETH_DBF_SETUP_PAGES 8 -#define QETH_DBF_SETUP_NR_AREAS 1 -#define QETH_DBF_SETUP_LEVEL 5 - -#define QETH_DBF_MISC_NAME "qeth_misc" -#define QETH_DBF_MISC_LEN 128 -#define QETH_DBF_MISC_PAGES 2 -#define QETH_DBF_MISC_NR_AREAS 1 -#define QETH_DBF_MISC_LEVEL 2 - -#define QETH_DBF_DATA_NAME "qeth_data" -#define QETH_DBF_DATA_LEN 96 -#define QETH_DBF_DATA_PAGES 8 -#define QETH_DBF_DATA_NR_AREAS 1 -#define QETH_DBF_DATA_LEVEL 2 - -#define QETH_DBF_CONTROL_NAME "qeth_control" -#define QETH_DBF_CONTROL_LEN 256 -#define QETH_DBF_CONTROL_PAGES 8 -#define QETH_DBF_CONTROL_NR_AREAS 2 -#define QETH_DBF_CONTROL_LEVEL 5 - -#define QETH_DBF_TRACE_NAME "qeth_trace" -#define QETH_DBF_TRACE_LEN 8 -#define QETH_DBF_TRACE_PAGES 4 -#define QETH_DBF_TRACE_NR_AREAS 2 -#define QETH_DBF_TRACE_LEVEL 3 -extern debug_info_t *qeth_dbf_trace; - -#define QETH_DBF_SENSE_NAME "qeth_sense" -#define QETH_DBF_SENSE_LEN 64 -#define QETH_DBF_SENSE_PAGES 2 -#define QETH_DBF_SENSE_NR_AREAS 1 -#define QETH_DBF_SENSE_LEVEL 2 - -#define QETH_DBF_QERR_NAME "qeth_qerr" -#define QETH_DBF_QERR_LEN 8 -#define QETH_DBF_QERR_PAGES 2 -#define QETH_DBF_QERR_NR_AREAS 2 -#define QETH_DBF_QERR_LEVEL 2 - -#define QETH_DBF_TEXT(name,level,text) \ - do { \ - debug_text_event(qeth_dbf_##name,level,text); \ - } while (0) - -#define QETH_DBF_HEX(name,level,addr,len) \ - do { \ - debug_event(qeth_dbf_##name,level,(void*)(addr),len); \ - } while (0) - -DECLARE_PER_CPU(char[256], qeth_dbf_txt_buf); - -#define QETH_DBF_TEXT_(name,level,text...) \ - do { \ - char* dbf_txt_buf = get_cpu_var(qeth_dbf_txt_buf); \ - sprintf(dbf_txt_buf, text); \ - debug_text_event(qeth_dbf_##name,level,dbf_txt_buf); \ - put_cpu_var(qeth_dbf_txt_buf); \ - } while (0) - -#define QETH_DBF_SPRINTF(name,level,text...) \ - do { \ - debug_sprintf_event(qeth_dbf_trace, level, ##text ); \ - debug_sprintf_event(qeth_dbf_trace, level, text ); \ - } while (0) - -/** - * some more debug stuff - */ -#define PRINTK_HEADER "qeth: " - -#define HEXDUMP16(importance,header,ptr) \ -PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x\n", \ - *(((char*)ptr)),*(((char*)ptr)+1),*(((char*)ptr)+2), \ - *(((char*)ptr)+3),*(((char*)ptr)+4),*(((char*)ptr)+5), \ - *(((char*)ptr)+6),*(((char*)ptr)+7),*(((char*)ptr)+8), \ - *(((char*)ptr)+9),*(((char*)ptr)+10),*(((char*)ptr)+11), \ - *(((char*)ptr)+12),*(((char*)ptr)+13), \ - *(((char*)ptr)+14),*(((char*)ptr)+15)); \ -PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x\n", \ - *(((char*)ptr)+16),*(((char*)ptr)+17), \ - *(((char*)ptr)+18),*(((char*)ptr)+19), \ - *(((char*)ptr)+20),*(((char*)ptr)+21), \ - *(((char*)ptr)+22),*(((char*)ptr)+23), \ - *(((char*)ptr)+24),*(((char*)ptr)+25), \ - *(((char*)ptr)+26),*(((char*)ptr)+27), \ - *(((char*)ptr)+28),*(((char*)ptr)+29), \ - *(((char*)ptr)+30),*(((char*)ptr)+31)); - -static inline void -qeth_hex_dump(unsigned char *buf, size_t len) -{ - size_t i; - - for (i = 0; i < len; i++) { - if (i && !(i % 16)) - printk("\n"); - printk("%02x ", *(buf + i)); - } - printk("\n"); -} - -#define SENSE_COMMAND_REJECT_BYTE 0 -#define SENSE_COMMAND_REJECT_FLAG 0x80 -#define SENSE_RESETTING_EVENT_BYTE 1 -#define SENSE_RESETTING_EVENT_FLAG 0x80 - -/* - * Common IO related definitions - */ -extern struct device *qeth_root_dev; -extern struct ccw_driver qeth_ccw_driver; -extern struct ccwgroup_driver qeth_ccwgroup_driver; - -#define CARD_RDEV(card) card->read.ccwdev -#define CARD_WDEV(card) card->write.ccwdev -#define CARD_DDEV(card) card->data.ccwdev -#define CARD_BUS_ID(card) card->gdev->dev.bus_id -#define CARD_RDEV_ID(card) card->read.ccwdev->dev.bus_id -#define CARD_WDEV_ID(card) card->write.ccwdev->dev.bus_id -#define CARD_DDEV_ID(card) card->data.ccwdev->dev.bus_id -#define CHANNEL_ID(channel) channel->ccwdev->dev.bus_id - -#define CARD_FROM_CDEV(cdev) (struct qeth_card *) \ - ((struct ccwgroup_device *)cdev->dev.driver_data)\ - ->dev.driver_data; - -/** - * card stuff - */ -struct qeth_perf_stats { - unsigned int bufs_rec; - unsigned int bufs_sent; - - unsigned int skbs_sent_pack; - unsigned int bufs_sent_pack; - - unsigned int sc_dp_p; - unsigned int sc_p_dp; - /* qdio_input_handler: number of times called, time spent in */ - __u64 inbound_start_time; - unsigned int inbound_cnt; - unsigned int inbound_time; - /* qeth_send_packet: number of times called, time spent in */ - __u64 outbound_start_time; - unsigned int outbound_cnt; - unsigned int outbound_time; - /* qdio_output_handler: number of times called, time spent in */ - __u64 outbound_handler_start_time; - unsigned int outbound_handler_cnt; - unsigned int outbound_handler_time; - /* number of calls to and time spent in do_QDIO for inbound queue */ - __u64 inbound_do_qdio_start_time; - unsigned int inbound_do_qdio_cnt; - unsigned int inbound_do_qdio_time; - /* number of calls to and time spent in do_QDIO for outbound queues */ - __u64 outbound_do_qdio_start_time; - unsigned int outbound_do_qdio_cnt; - unsigned int outbound_do_qdio_time; - /* eddp data */ - unsigned int large_send_bytes; - unsigned int large_send_cnt; - unsigned int sg_skbs_sent; - unsigned int sg_frags_sent; - /* initial values when measuring starts */ - unsigned long initial_rx_packets; - unsigned long initial_tx_packets; - /* inbound scatter gather data */ - unsigned int sg_skbs_rx; - unsigned int sg_frags_rx; - unsigned int sg_alloc_page_rx; -}; - -/* Routing stuff */ -struct qeth_routing_info { - enum qeth_routing_types type; -}; - -/* IPA stuff */ -struct qeth_ipa_info { - __u32 supported_funcs; - __u32 enabled_funcs; -}; - -static inline int -qeth_is_ipa_supported(struct qeth_ipa_info *ipa, enum qeth_ipa_funcs func) -{ - return (ipa->supported_funcs & func); -} - -static inline int -qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, enum qeth_ipa_funcs func) -{ - return (ipa->supported_funcs & ipa->enabled_funcs & func); -} - -#define qeth_adp_supported(c,f) \ - qeth_is_ipa_supported(&c->options.adp, f) -#define qeth_adp_enabled(c,f) \ - qeth_is_ipa_enabled(&c->options.adp, f) -#define qeth_is_supported(c,f) \ - qeth_is_ipa_supported(&c->options.ipa4, f) -#define qeth_is_enabled(c,f) \ - qeth_is_ipa_enabled(&c->options.ipa4, f) -#ifdef CONFIG_QETH_IPV6 -#define qeth_is_supported6(c,f) \ - qeth_is_ipa_supported(&c->options.ipa6, f) -#define qeth_is_enabled6(c,f) \ - qeth_is_ipa_enabled(&c->options.ipa6, f) -#else /* CONFIG_QETH_IPV6 */ -#define qeth_is_supported6(c,f) 0 -#define qeth_is_enabled6(c,f) 0 -#endif /* CONFIG_QETH_IPV6 */ -#define qeth_is_ipafunc_supported(c,prot,f) \ - (prot==QETH_PROT_IPV6)? qeth_is_supported6(c,f):qeth_is_supported(c,f) -#define qeth_is_ipafunc_enabled(c,prot,f) \ - (prot==QETH_PROT_IPV6)? qeth_is_enabled6(c,f):qeth_is_enabled(c,f) - - -#define QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT 0x0101 -#define QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT 0x0101 -#define QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT 0x4108 -#define QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT 0x5108 - -#define QETH_MODELLIST_ARRAY \ - {{0x1731,0x01,0x1732,0x01,QETH_CARD_TYPE_OSAE,1, \ - QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ - QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ - QETH_MAX_QUEUES,0}, \ - {0x1731,0x05,0x1732,0x05,QETH_CARD_TYPE_IQD,0, \ - QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT, \ - QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT, \ - QETH_MAX_QUEUES,0x103}, \ - {0x1731,0x06,0x1732,0x06,QETH_CARD_TYPE_OSN,0, \ - QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ - QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ - QETH_MAX_QUEUES,0}, \ - {0,0,0,0,0,0,0,0,0}} - -#define QETH_REAL_CARD 1 -#define QETH_VLAN_CARD 2 -#define QETH_BUFSIZE 4096 - -/** - * some more defs - */ -#define IF_NAME_LEN 16 -#define QETH_TX_TIMEOUT 100 * HZ -#define QETH_RCD_TIMEOUT 60 * HZ -#define QETH_HEADER_SIZE 32 -#define MAX_PORTNO 15 -#define QETH_FAKE_LL_LEN_ETH ETH_HLEN -#define QETH_FAKE_LL_LEN_TR (sizeof(struct trh_hdr)-TR_MAXRIFLEN+sizeof(struct trllc)) -#define QETH_FAKE_LL_V6_ADDR_POS 24 - -/*IPv6 address autoconfiguration stuff*/ -#define UNIQUE_ID_IF_CREATE_ADDR_FAILED 0xfffe -#define UNIQUE_ID_NOT_BY_CARD 0x10000 - -/*****************************************************************************/ -/* QDIO queue and buffer handling */ -/*****************************************************************************/ -#define QETH_MAX_QUEUES 4 -#define QETH_IN_BUF_SIZE_DEFAULT 65536 -#define QETH_IN_BUF_COUNT_DEFAULT 16 -#define QETH_IN_BUF_COUNT_MIN 8 -#define QETH_IN_BUF_COUNT_MAX 128 -#define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12) -#define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \ - ((card)->qdio.in_buf_pool.buf_count / 2) - -/* buffers we have to be behind before we get a PCI */ -#define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1) -/*enqueued free buffers left before we get a PCI*/ -#define QETH_PCI_THRESHOLD_B(card) 0 -/*not used unless the microcode gets patched*/ -#define QETH_PCI_TIMER_VALUE(card) 3 - -#define QETH_MIN_INPUT_THRESHOLD 1 -#define QETH_MAX_INPUT_THRESHOLD 500 -#define QETH_MIN_OUTPUT_THRESHOLD 1 -#define QETH_MAX_OUTPUT_THRESHOLD 300 - -/* priority queing */ -#define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING -#define QETH_DEFAULT_QUEUE 2 -#define QETH_NO_PRIO_QUEUEING 0 -#define QETH_PRIO_Q_ING_PREC 1 -#define QETH_PRIO_Q_ING_TOS 2 -#define IP_TOS_LOWDELAY 0x10 -#define IP_TOS_HIGHTHROUGHPUT 0x08 -#define IP_TOS_HIGHRELIABILITY 0x04 -#define IP_TOS_NOTIMPORTANT 0x02 - -/* Packing */ -#define QETH_LOW_WATERMARK_PACK 2 -#define QETH_HIGH_WATERMARK_PACK 5 -#define QETH_WATERMARK_PACK_FUZZ 1 - -#define QETH_IP_HEADER_SIZE 40 - -/* large receive scatter gather copy break */ -#define QETH_RX_SG_CB (PAGE_SIZE >> 1) - -struct qeth_hdr_layer3 { - __u8 id; - __u8 flags; - __u16 inbound_checksum; /*TSO:__u16 seqno */ - __u32 token; /*TSO: __u32 reserved */ - __u16 length; - __u8 vlan_prio; - __u8 ext_flags; - __u16 vlan_id; - __u16 frame_offset; - __u8 dest_addr[16]; -} __attribute__ ((packed)); - -struct qeth_hdr_layer2 { - __u8 id; - __u8 flags[3]; - __u8 port_no; - __u8 hdr_length; - __u16 pkt_length; - __u16 seq_no; - __u16 vlan_id; - __u32 reserved; - __u8 reserved2[16]; -} __attribute__ ((packed)); - -struct qeth_hdr_osn { - __u8 id; - __u8 reserved; - __u16 seq_no; - __u16 reserved2; - __u16 control_flags; - __u16 pdu_length; - __u8 reserved3[18]; - __u32 ccid; -} __attribute__ ((packed)); - -struct qeth_hdr { - union { - struct qeth_hdr_layer2 l2; - struct qeth_hdr_layer3 l3; - struct qeth_hdr_osn osn; - } hdr; -} __attribute__ ((packed)); - -/*TCP Segmentation Offload header*/ -struct qeth_hdr_ext_tso { - __u16 hdr_tot_len; - __u8 imb_hdr_no; - __u8 reserved; - __u8 hdr_type; - __u8 hdr_version; - __u16 hdr_len; - __u32 payload_len; - __u16 mss; - __u16 dg_hdr_len; - __u8 padding[16]; -} __attribute__ ((packed)); - -struct qeth_hdr_tso { - struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/ - struct qeth_hdr_ext_tso ext; -} __attribute__ ((packed)); - - -/* flags for qeth_hdr.flags */ -#define QETH_HDR_PASSTHRU 0x10 -#define QETH_HDR_IPV6 0x80 -#define QETH_HDR_CAST_MASK 0x07 -enum qeth_cast_flags { - QETH_CAST_UNICAST = 0x06, - QETH_CAST_MULTICAST = 0x04, - QETH_CAST_BROADCAST = 0x05, - QETH_CAST_ANYCAST = 0x07, - QETH_CAST_NOCAST = 0x00, -}; - -enum qeth_layer2_frame_flags { - QETH_LAYER2_FLAG_MULTICAST = 0x01, - QETH_LAYER2_FLAG_BROADCAST = 0x02, - QETH_LAYER2_FLAG_UNICAST = 0x04, - QETH_LAYER2_FLAG_VLAN = 0x10, -}; - -enum qeth_header_ids { - QETH_HEADER_TYPE_LAYER3 = 0x01, - QETH_HEADER_TYPE_LAYER2 = 0x02, - QETH_HEADER_TYPE_TSO = 0x03, - QETH_HEADER_TYPE_OSN = 0x04, -}; -/* flags for qeth_hdr.ext_flags */ -#define QETH_HDR_EXT_VLAN_FRAME 0x01 -#define QETH_HDR_EXT_TOKEN_ID 0x02 -#define QETH_HDR_EXT_INCLUDE_VLAN_TAG 0x04 -#define QETH_HDR_EXT_SRC_MAC_ADDR 0x08 -#define QETH_HDR_EXT_CSUM_HDR_REQ 0x10 -#define QETH_HDR_EXT_CSUM_TRANSP_REQ 0x20 -#define QETH_HDR_EXT_UDP_TSO 0x40 /*bit off for TCP*/ - -static inline int -qeth_is_last_sbale(struct qdio_buffer_element *sbale) -{ - return (sbale->flags & SBAL_FLAGS_LAST_ENTRY); -} - -enum qeth_qdio_buffer_states { - /* - * inbound: read out by driver; owned by hardware in order to be filled - * outbound: owned by driver in order to be filled - */ - QETH_QDIO_BUF_EMPTY, - /* - * inbound: filled by hardware; owned by driver in order to be read out - * outbound: filled by driver; owned by hardware in order to be sent - */ - QETH_QDIO_BUF_PRIMED, -}; - -enum qeth_qdio_info_states { - QETH_QDIO_UNINITIALIZED, - QETH_QDIO_ALLOCATED, - QETH_QDIO_ESTABLISHED, - QETH_QDIO_CLEANING -}; - -struct qeth_buffer_pool_entry { - struct list_head list; - struct list_head init_list; - void *elements[QDIO_MAX_ELEMENTS_PER_BUFFER]; -}; - -struct qeth_qdio_buffer_pool { - struct list_head entry_list; - int buf_count; -}; - -struct qeth_qdio_buffer { - struct qdio_buffer *buffer; - volatile enum qeth_qdio_buffer_states state; - /* the buffer pool entry currently associated to this buffer */ - struct qeth_buffer_pool_entry *pool_entry; -}; - -struct qeth_qdio_q { - struct qdio_buffer qdio_bufs[QDIO_MAX_BUFFERS_PER_Q]; - struct qeth_qdio_buffer bufs[QDIO_MAX_BUFFERS_PER_Q]; - /* - * buf_to_init means "buffer must be initialized by driver and must - * be made available for hardware" -> state is set to EMPTY - */ - volatile int next_buf_to_init; -} __attribute__ ((aligned(256))); - -/* possible types of qeth large_send support */ -enum qeth_large_send_types { - QETH_LARGE_SEND_NO, - QETH_LARGE_SEND_EDDP, - QETH_LARGE_SEND_TSO, -}; - -struct qeth_qdio_out_buffer { - struct qdio_buffer *buffer; - atomic_t state; - volatile int next_element_to_fill; - struct sk_buff_head skb_list; - struct list_head ctx_list; -}; - -struct qeth_card; - -enum qeth_out_q_states { - QETH_OUT_Q_UNLOCKED, - QETH_OUT_Q_LOCKED, - QETH_OUT_Q_LOCKED_FLUSH, -}; - -struct qeth_qdio_out_q { - struct qdio_buffer qdio_bufs[QDIO_MAX_BUFFERS_PER_Q]; - struct qeth_qdio_out_buffer bufs[QDIO_MAX_BUFFERS_PER_Q]; - int queue_no; - struct qeth_card *card; - atomic_t state; - volatile int do_pack; - /* - * index of buffer to be filled by driver; state EMPTY or PACKING - */ - volatile int next_buf_to_fill; - /* - * number of buffers that are currently filled (PRIMED) - * -> these buffers are hardware-owned - */ - atomic_t used_buffers; - /* indicates whether PCI flag must be set (or if one is outstanding) */ - atomic_t set_pci_flags_count; -} __attribute__ ((aligned(256))); - -struct qeth_qdio_info { - atomic_t state; - /* input */ - struct qeth_qdio_q *in_q; - struct qeth_qdio_buffer_pool in_buf_pool; - struct qeth_qdio_buffer_pool init_pool; - int in_buf_size; - - /* output */ - int no_out_queues; - struct qeth_qdio_out_q **out_qs; - - /* priority queueing */ - int do_prio_queueing; - int default_out_queue; -}; - -enum qeth_send_errors { - QETH_SEND_ERROR_NONE, - QETH_SEND_ERROR_LINK_FAILURE, - QETH_SEND_ERROR_RETRY, - QETH_SEND_ERROR_KICK_IT, -}; - -#define QETH_ETH_MAC_V4 0x0100 /* like v4 */ -#define QETH_ETH_MAC_V6 0x3333 /* like v6 */ -/* tr mc mac is longer, but that will be enough to detect mc frames */ -#define QETH_TR_MAC_NC 0xc000 /* non-canonical */ -#define QETH_TR_MAC_C 0x0300 /* canonical */ - -#define DEFAULT_ADD_HHLEN 0 -#define MAX_ADD_HHLEN 1024 - -/** - * buffer stuff for read channel - */ -#define QETH_CMD_BUFFER_NO 8 - -/** - * channel state machine - */ -enum qeth_channel_states { - CH_STATE_UP, - CH_STATE_DOWN, - CH_STATE_ACTIVATING, - CH_STATE_HALTED, - CH_STATE_STOPPED, - CH_STATE_RCD, - CH_STATE_RCD_DONE, -}; -/** - * card state machine - */ -enum qeth_card_states { - CARD_STATE_DOWN, - CARD_STATE_HARDSETUP, - CARD_STATE_SOFTSETUP, - CARD_STATE_UP, - CARD_STATE_RECOVER, -}; - -/** - * Protocol versions - */ -enum qeth_prot_versions { - QETH_PROT_IPV4 = 0x0004, - QETH_PROT_IPV6 = 0x0006, -}; - -enum qeth_ip_types { - QETH_IP_TYPE_NORMAL, - QETH_IP_TYPE_VIPA, - QETH_IP_TYPE_RXIP, - QETH_IP_TYPE_DEL_ALL_MC, -}; - -enum qeth_cmd_buffer_state { - BUF_STATE_FREE, - BUF_STATE_LOCKED, - BUF_STATE_PROCESSED, -}; -/** - * IP address and multicast list - */ -struct qeth_ipaddr { - struct list_head entry; - enum qeth_ip_types type; - enum qeth_ipa_setdelip_flags set_flags; - enum qeth_ipa_setdelip_flags del_flags; - int is_multicast; - volatile int users; - enum qeth_prot_versions proto; - unsigned char mac[OSA_ADDR_LEN]; - union { - struct { - unsigned int addr; - unsigned int mask; - } a4; - struct { - struct in6_addr addr; - unsigned int pfxlen; - } a6; - } u; -}; - -struct qeth_ipato_entry { - struct list_head entry; - enum qeth_prot_versions proto; - char addr[16]; - int mask_bits; -}; - -struct qeth_ipato { - int enabled; - int invert4; - int invert6; - struct list_head entries; -}; - -struct qeth_channel; - -struct qeth_cmd_buffer { - enum qeth_cmd_buffer_state state; - struct qeth_channel *channel; - unsigned char *data; - int rc; - void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *); -}; - - -/** - * definition of a qeth channel, used for read and write - */ -struct qeth_channel { - enum qeth_channel_states state; - struct ccw1 ccw; - spinlock_t iob_lock; - wait_queue_head_t wait_q; - struct tasklet_struct irq_tasklet; - struct ccw_device *ccwdev; -/*command buffer for control data*/ - struct qeth_cmd_buffer iob[QETH_CMD_BUFFER_NO]; - atomic_t irq_pending; - volatile int io_buf_no; - volatile int buf_no; -}; - -/** - * OSA card related definitions - */ -struct qeth_token { - __u32 issuer_rm_w; - __u32 issuer_rm_r; - __u32 cm_filter_w; - __u32 cm_filter_r; - __u32 cm_connection_w; - __u32 cm_connection_r; - __u32 ulp_filter_w; - __u32 ulp_filter_r; - __u32 ulp_connection_w; - __u32 ulp_connection_r; -}; - -struct qeth_seqno { - __u32 trans_hdr; - __u32 pdu_hdr; - __u32 pdu_hdr_ack; - __u16 ipa; - __u32 pkt_seqno; -}; - -struct qeth_reply { - struct list_head list; - wait_queue_head_t wait_q; - int (*callback)(struct qeth_card *,struct qeth_reply *,unsigned long); - u32 seqno; - unsigned long offset; - atomic_t received; - int rc; - void *param; - struct qeth_card *card; - atomic_t refcnt; -}; - - -struct qeth_card_blkt { - int time_total; - int inter_packet; - int inter_packet_jumbo; -}; - -#define QETH_BROADCAST_WITH_ECHO 0x01 -#define QETH_BROADCAST_WITHOUT_ECHO 0x02 -#define QETH_LAYER2_MAC_READ 0x01 -#define QETH_LAYER2_MAC_REGISTERED 0x02 -struct qeth_card_info { - unsigned short unit_addr2; - unsigned short cula; - unsigned short chpid; - __u16 func_level; - char mcl_level[QETH_MCL_LENGTH + 1]; - int guestlan; - int mac_bits; - int portname_required; - int portno; - char portname[9]; - enum qeth_card_types type; - enum qeth_link_types link_type; - int is_multicast_different; - int initial_mtu; - int max_mtu; - int broadcast_capable; - int unique_id; - struct qeth_card_blkt blkt; - __u32 csum_mask; - enum qeth_ipa_promisc_modes promisc_mode; -}; - -struct qeth_card_options { - struct qeth_routing_info route4; - struct qeth_ipa_info ipa4; - struct qeth_ipa_info adp; /*Adapter parameters*/ -#ifdef CONFIG_QETH_IPV6 - struct qeth_routing_info route6; - struct qeth_ipa_info ipa6; -#endif /* QETH_IPV6 */ - enum qeth_checksum_types checksum_type; - int broadcast_mode; - int macaddr_mode; - int fake_broadcast; - int add_hhlen; - int fake_ll; - int layer2; - enum qeth_large_send_types large_send; - int performance_stats; - int rx_sg_cb; -}; - -/* - * thread bits for qeth_card thread masks - */ -enum qeth_threads { - QETH_SET_IP_THREAD = 1, - QETH_RECOVER_THREAD = 2, - QETH_SET_PROMISC_MODE_THREAD = 4, -}; - -struct qeth_osn_info { - int (*assist_cb)(struct net_device *dev, void *data); - int (*data_cb)(struct sk_buff *skb); -}; - -struct qeth_card { - struct list_head list; - enum qeth_card_states state; - int lan_online; - spinlock_t lock; -/*hardware and sysfs stuff*/ - struct ccwgroup_device *gdev; - struct qeth_channel read; - struct qeth_channel write; - struct qeth_channel data; - - struct net_device *dev; - struct net_device_stats stats; - - struct qeth_card_info info; - struct qeth_token token; - struct qeth_seqno seqno; - struct qeth_card_options options; - - wait_queue_head_t wait_q; -#ifdef CONFIG_QETH_VLAN - spinlock_t vlanlock; - struct vlan_group *vlangrp; -#endif - struct work_struct kernel_thread_starter; - spinlock_t thread_mask_lock; - volatile unsigned long thread_start_mask; - volatile unsigned long thread_allowed_mask; - volatile unsigned long thread_running_mask; - spinlock_t ip_lock; - struct list_head ip_list; - struct list_head *ip_tbd_list; - struct qeth_ipato ipato; - struct list_head cmd_waiter_list; - /* QDIO buffer handling */ - struct qeth_qdio_info qdio; - struct qeth_perf_stats perf_stats; - int use_hard_stop; - const struct header_ops *orig_header_ops; - struct qeth_osn_info osn_info; - atomic_t force_alloc_skb; -}; - -struct qeth_card_list_struct { - struct list_head list; - rwlock_t rwlock; -}; - -extern struct qeth_card_list_struct qeth_card_list; - -/*notifier list */ -struct qeth_notify_list_struct { - struct list_head list; - struct task_struct *task; - int signum; -}; -extern spinlock_t qeth_notify_lock; -extern struct list_head qeth_notify_list; - -/*some helper functions*/ - -#define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") - -static inline __u8 -qeth_get_ipa_adp_type(enum qeth_link_types link_type) -{ - switch (link_type) { - case QETH_LINK_TYPE_HSTR: - return 2; - default: - return 1; - } -} - -static inline struct sk_buff * -qeth_realloc_headroom(struct qeth_card *card, struct sk_buff *skb, int size) -{ - struct sk_buff *new_skb = skb; - - if (skb_headroom(skb) >= size) - return skb; - new_skb = skb_realloc_headroom(skb, size); - if (!new_skb) - PRINT_ERR("Could not realloc headroom for qeth_hdr " - "on interface %s", QETH_CARD_IFNAME(card)); - return new_skb; -} - -static inline struct sk_buff * -qeth_pskb_unshare(struct sk_buff *skb, gfp_t pri) -{ - struct sk_buff *nskb; - if (!skb_cloned(skb)) - return skb; - nskb = skb_copy(skb, pri); - return nskb; -} - -static inline void * -qeth_push_skb(struct qeth_card *card, struct sk_buff *skb, int size) -{ - void *hdr; - - hdr = (void *) skb_push(skb, size); - /* - * sanity check, the Linux memory allocation scheme should - * never present us cases like this one (the qdio header size plus - * the first 40 bytes of the paket cross a 4k boundary) - */ - if ((((unsigned long) hdr) & (~(PAGE_SIZE - 1))) != - (((unsigned long) hdr + size + - QETH_IP_HEADER_SIZE) & (~(PAGE_SIZE - 1)))) { - PRINT_ERR("Misaligned packet on interface %s. Discarded.", - QETH_CARD_IFNAME(card)); - return NULL; - } - return hdr; -} - - -static inline int -qeth_get_hlen(__u8 link_type) -{ -#ifdef CONFIG_QETH_IPV6 - switch (link_type) { - case QETH_LINK_TYPE_HSTR: - case QETH_LINK_TYPE_LANE_TR: - return sizeof(struct qeth_hdr_tso) + TR_HLEN; - default: -#ifdef CONFIG_QETH_VLAN - return sizeof(struct qeth_hdr_tso) + VLAN_ETH_HLEN; -#else - return sizeof(struct qeth_hdr_tso) + ETH_HLEN; -#endif - } -#else /* CONFIG_QETH_IPV6 */ -#ifdef CONFIG_QETH_VLAN - return sizeof(struct qeth_hdr_tso) + VLAN_HLEN; -#else - return sizeof(struct qeth_hdr_tso); -#endif -#endif /* CONFIG_QETH_IPV6 */ -} - -static inline unsigned short -qeth_get_netdev_flags(struct qeth_card *card) -{ - if (card->options.layer2 && - (card->info.type == QETH_CARD_TYPE_OSAE)) - return 0; - switch (card->info.type) { - case QETH_CARD_TYPE_IQD: - case QETH_CARD_TYPE_OSN: - return IFF_NOARP; -#ifdef CONFIG_QETH_IPV6 - default: - return 0; -#else - default: - return IFF_NOARP; -#endif - } -} - -static inline int -qeth_get_initial_mtu_for_card(struct qeth_card * card) -{ - switch (card->info.type) { - case QETH_CARD_TYPE_UNKNOWN: - return 1500; - case QETH_CARD_TYPE_IQD: - return card->info.max_mtu; - case QETH_CARD_TYPE_OSAE: - switch (card->info.link_type) { - case QETH_LINK_TYPE_HSTR: - case QETH_LINK_TYPE_LANE_TR: - return 2000; - default: - return 1492; - } - default: - return 1500; - } -} - -static inline int -qeth_get_max_mtu_for_card(int cardtype) -{ - switch (cardtype) { - - case QETH_CARD_TYPE_UNKNOWN: - case QETH_CARD_TYPE_OSAE: - case QETH_CARD_TYPE_OSN: - return 61440; - case QETH_CARD_TYPE_IQD: - return 57344; - default: - return 1500; - } -} - -static inline int -qeth_get_mtu_out_of_mpc(int cardtype) -{ - switch (cardtype) { - case QETH_CARD_TYPE_IQD: - return 1; - default: - return 0; - } -} - -static inline int -qeth_get_mtu_outof_framesize(int framesize) -{ - switch (framesize) { - case 0x4000: - return 8192; - case 0x6000: - return 16384; - case 0xa000: - return 32768; - case 0xffff: - return 57344; - default: - return 0; - } -} - -static inline int -qeth_mtu_is_valid(struct qeth_card * card, int mtu) -{ - switch (card->info.type) { - case QETH_CARD_TYPE_OSAE: - return ((mtu >= 576) && (mtu <= 61440)); - case QETH_CARD_TYPE_IQD: - return ((mtu >= 576) && - (mtu <= card->info.max_mtu + 4096 - 32)); - case QETH_CARD_TYPE_OSN: - case QETH_CARD_TYPE_UNKNOWN: - default: - return 1; - } -} - -static inline int -qeth_get_arphdr_type(int cardtype, int linktype) -{ - switch (cardtype) { - case QETH_CARD_TYPE_OSAE: - case QETH_CARD_TYPE_OSN: - switch (linktype) { - case QETH_LINK_TYPE_LANE_TR: - case QETH_LINK_TYPE_HSTR: - return ARPHRD_IEEE802_TR; - default: - return ARPHRD_ETHER; - } - case QETH_CARD_TYPE_IQD: - default: - return ARPHRD_ETHER; - } -} - -static inline int -qeth_get_micros(void) -{ - return (int) (get_clock() >> 12); -} - -static inline int -qeth_get_qdio_q_format(struct qeth_card *card) -{ - switch (card->info.type) { - case QETH_CARD_TYPE_IQD: - return 2; - default: - return 0; - } -} - -static inline int -qeth_isxdigit(char * buf) -{ - while (*buf) { - if (!isxdigit(*buf++)) - return 0; - } - return 1; -} - -static inline void -qeth_ipaddr4_to_string(const __u8 *addr, char *buf) -{ - sprintf(buf, "%i.%i.%i.%i", addr[0], addr[1], addr[2], addr[3]); -} - -static inline int -qeth_string_to_ipaddr4(const char *buf, __u8 *addr) -{ - int count = 0, rc = 0; - int in[4]; - char c; - - rc = sscanf(buf, "%u.%u.%u.%u%c", - &in[0], &in[1], &in[2], &in[3], &c); - if (rc != 4 && (rc != 5 || c != '\n')) - return -EINVAL; - for (count = 0; count < 4; count++) { - if (in[count] > 255) - return -EINVAL; - addr[count] = in[count]; - } - return 0; -} - -static inline void -qeth_ipaddr6_to_string(const __u8 *addr, char *buf) -{ - sprintf(buf, "%02x%02x:%02x%02x:%02x%02x:%02x%02x" - ":%02x%02x:%02x%02x:%02x%02x:%02x%02x", - addr[0], addr[1], addr[2], addr[3], - addr[4], addr[5], addr[6], addr[7], - addr[8], addr[9], addr[10], addr[11], - addr[12], addr[13], addr[14], addr[15]); -} - -static inline int -qeth_string_to_ipaddr6(const char *buf, __u8 *addr) -{ - const char *end, *end_tmp, *start; - __u16 *in; - char num[5]; - int num2, cnt, out, found, save_cnt; - unsigned short in_tmp[8] = {0, }; - - cnt = out = found = save_cnt = num2 = 0; - end = start = buf; - in = (__u16 *) addr; - memset(in, 0, 16); - while (*end) { - end = strchr(start,':'); - if (end == NULL) { - end = buf + strlen(buf); - if ((end_tmp = strchr(start, '\n')) != NULL) - end = end_tmp; - out = 1; - } - if ((end - start)) { - memset(num, 0, 5); - if ((end - start) > 4) - return -EINVAL; - memcpy(num, start, end - start); - if (!qeth_isxdigit(num)) - return -EINVAL; - sscanf(start, "%x", &num2); - if (found) - in_tmp[save_cnt++] = num2; - else - in[cnt++] = num2; - if (out) - break; - } else { - if (found) - return -EINVAL; - found = 1; - } - start = ++end; - } - if (cnt + save_cnt > 8) - return -EINVAL; - cnt = 7; - while (save_cnt) - in[cnt--] = in_tmp[--save_cnt]; - return 0; -} - -static inline void -qeth_ipaddr_to_string(enum qeth_prot_versions proto, const __u8 *addr, - char *buf) -{ - if (proto == QETH_PROT_IPV4) - qeth_ipaddr4_to_string(addr, buf); - else if (proto == QETH_PROT_IPV6) - qeth_ipaddr6_to_string(addr, buf); -} - -static inline int -qeth_string_to_ipaddr(const char *buf, enum qeth_prot_versions proto, - __u8 *addr) -{ - if (proto == QETH_PROT_IPV4) - return qeth_string_to_ipaddr4(buf, addr); - else if (proto == QETH_PROT_IPV6) - return qeth_string_to_ipaddr6(buf, addr); - else - return -EINVAL; -} - -extern int -qeth_setrouting_v4(struct qeth_card *); -extern int -qeth_setrouting_v6(struct qeth_card *); - -extern int -qeth_add_ipato_entry(struct qeth_card *, struct qeth_ipato_entry *); - -extern void -qeth_del_ipato_entry(struct qeth_card *, enum qeth_prot_versions, u8 *, int); - -extern int -qeth_add_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *); - -extern void -qeth_del_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *); - -extern int -qeth_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *); - -extern void -qeth_del_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *); - -extern int -qeth_notifier_register(struct task_struct *, int ); - -extern int -qeth_notifier_unregister(struct task_struct * ); - -extern void -qeth_schedule_recovery(struct qeth_card *); - -extern int -qeth_realloc_buffer_pool(struct qeth_card *, int); - -extern int -qeth_set_large_send(struct qeth_card *, enum qeth_large_send_types); - -extern void -qeth_fill_header(struct qeth_card *, struct qeth_hdr *, - struct sk_buff *, int, int); -extern void -qeth_flush_buffers(struct qeth_qdio_out_q *, int, int, int); - -extern int -qeth_osn_assist(struct net_device *, void *, int); - -extern int -qeth_osn_register(unsigned char *read_dev_no, - struct net_device **, - int (*assist_cb)(struct net_device *, void *), - int (*data_cb)(struct sk_buff *)); - -extern void -qeth_osn_deregister(struct net_device *); - -#endif /* __QETH_H__ */ diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c deleted file mode 100644 index e3c268c..0000000 --- a/drivers/s390/net/qeth_eddp.c +++ /dev/null @@ -1,634 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_eddp.c - * - * Enhanced Device Driver Packing (EDDP) support for the qeth driver. - * - * Copyright 2004 IBM Corporation - * - * Author(s): Thomas Spatzier - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "qeth.h" -#include "qeth_mpc.h" -#include "qeth_eddp.h" - -int -qeth_eddp_check_buffers_for_context(struct qeth_qdio_out_q *queue, - struct qeth_eddp_context *ctx) -{ - int index = queue->next_buf_to_fill; - int elements_needed = ctx->num_elements; - int elements_in_buffer; - int skbs_in_buffer; - int buffers_needed = 0; - - QETH_DBF_TEXT(trace, 5, "eddpcbfc"); - while(elements_needed > 0) { - buffers_needed++; - if (atomic_read(&queue->bufs[index].state) != - QETH_QDIO_BUF_EMPTY) - return -EBUSY; - - elements_in_buffer = QETH_MAX_BUFFER_ELEMENTS(queue->card) - - queue->bufs[index].next_element_to_fill; - skbs_in_buffer = elements_in_buffer / ctx->elements_per_skb; - elements_needed -= skbs_in_buffer * ctx->elements_per_skb; - index = (index + 1) % QDIO_MAX_BUFFERS_PER_Q; - } - return buffers_needed; -} - -static void -qeth_eddp_free_context(struct qeth_eddp_context *ctx) -{ - int i; - - QETH_DBF_TEXT(trace, 5, "eddpfctx"); - for (i = 0; i < ctx->num_pages; ++i) - free_page((unsigned long)ctx->pages[i]); - kfree(ctx->pages); - kfree(ctx->elements); - kfree(ctx); -} - - -static inline void -qeth_eddp_get_context(struct qeth_eddp_context *ctx) -{ - atomic_inc(&ctx->refcnt); -} - -void -qeth_eddp_put_context(struct qeth_eddp_context *ctx) -{ - if (atomic_dec_return(&ctx->refcnt) == 0) - qeth_eddp_free_context(ctx); -} - -void -qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf) -{ - struct qeth_eddp_context_reference *ref; - - QETH_DBF_TEXT(trace, 6, "eddprctx"); - while (!list_empty(&buf->ctx_list)){ - ref = list_entry(buf->ctx_list.next, - struct qeth_eddp_context_reference, list); - qeth_eddp_put_context(ref->ctx); - list_del(&ref->list); - kfree(ref); - } -} - -static int -qeth_eddp_buf_ref_context(struct qeth_qdio_out_buffer *buf, - struct qeth_eddp_context *ctx) -{ - struct qeth_eddp_context_reference *ref; - - QETH_DBF_TEXT(trace, 6, "eddprfcx"); - ref = kmalloc(sizeof(struct qeth_eddp_context_reference), GFP_ATOMIC); - if (ref == NULL) - return -ENOMEM; - qeth_eddp_get_context(ctx); - ref->ctx = ctx; - list_add_tail(&ref->list, &buf->ctx_list); - return 0; -} - -int -qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, - struct qeth_eddp_context *ctx, - int index) -{ - struct qeth_qdio_out_buffer *buf = NULL; - struct qdio_buffer *buffer; - int elements = ctx->num_elements; - int element = 0; - int flush_cnt = 0; - int must_refcnt = 1; - int i; - - QETH_DBF_TEXT(trace, 5, "eddpfibu"); - while (elements > 0) { - buf = &queue->bufs[index]; - if (atomic_read(&buf->state) != QETH_QDIO_BUF_EMPTY){ - /* normally this should not happen since we checked for - * available elements in qeth_check_elements_for_context - */ - if (element == 0) - return -EBUSY; - else { - PRINT_WARN("could only partially fill eddp " - "buffer!\n"); - goto out; - } - } - /* check if the whole next skb fits into current buffer */ - if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) - - buf->next_element_to_fill) - < ctx->elements_per_skb){ - /* no -> go to next buffer */ - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - index = (index + 1) % QDIO_MAX_BUFFERS_PER_Q; - flush_cnt++; - /* new buffer, so we have to add ctx to buffer'ctx_list - * and increment ctx's refcnt */ - must_refcnt = 1; - continue; - } - if (must_refcnt){ - must_refcnt = 0; - if (qeth_eddp_buf_ref_context(buf, ctx)){ - PRINT_WARN("no memory to create eddp context " - "reference\n"); - goto out_check; - } - } - buffer = buf->buffer; - /* fill one skb into buffer */ - for (i = 0; i < ctx->elements_per_skb; ++i){ - if (ctx->elements[element].length != 0) { - buffer->element[buf->next_element_to_fill]. - addr = ctx->elements[element].addr; - buffer->element[buf->next_element_to_fill]. - length = ctx->elements[element].length; - buffer->element[buf->next_element_to_fill]. - flags = ctx->elements[element].flags; - buf->next_element_to_fill++; - } - element++; - elements--; - } - } -out_check: - if (!queue->do_pack) { - QETH_DBF_TEXT(trace, 6, "fillbfnp"); - /* set state to PRIMED -> will be flushed */ - if (buf->next_element_to_fill > 0){ - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - flush_cnt++; - } - } else { - if (queue->card->options.performance_stats) - queue->card->perf_stats.skbs_sent_pack++; - QETH_DBF_TEXT(trace, 6, "fillbfpa"); - if (buf->next_element_to_fill >= - QETH_MAX_BUFFER_ELEMENTS(queue->card)) { - /* - * packed buffer if full -> set state PRIMED - * -> will be flushed - */ - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - flush_cnt++; - } - } -out: - return flush_cnt; -} - -static void -qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx, - struct qeth_eddp_data *eddp, int data_len) -{ - u8 *page; - int page_remainder; - int page_offset; - int pkt_len; - struct qeth_eddp_element *element; - - QETH_DBF_TEXT(trace, 5, "eddpcrsh"); - page = ctx->pages[ctx->offset >> PAGE_SHIFT]; - page_offset = ctx->offset % PAGE_SIZE; - element = &ctx->elements[ctx->num_elements]; - pkt_len = eddp->nhl + eddp->thl + data_len; - /* FIXME: layer2 and VLAN !!! */ - if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) - pkt_len += ETH_HLEN; - if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) - pkt_len += VLAN_HLEN; - /* does complete packet fit in current page ? */ - page_remainder = PAGE_SIZE - page_offset; - if (page_remainder < (sizeof(struct qeth_hdr) + pkt_len)){ - /* no -> go to start of next page */ - ctx->offset += page_remainder; - page = ctx->pages[ctx->offset >> PAGE_SHIFT]; - page_offset = 0; - } - memcpy(page + page_offset, &eddp->qh, sizeof(struct qeth_hdr)); - element->addr = page + page_offset; - element->length = sizeof(struct qeth_hdr); - ctx->offset += sizeof(struct qeth_hdr); - page_offset += sizeof(struct qeth_hdr); - /* add mac header (?) */ - if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2){ - memcpy(page + page_offset, &eddp->mac, ETH_HLEN); - element->length += ETH_HLEN; - ctx->offset += ETH_HLEN; - page_offset += ETH_HLEN; - } - /* add VLAN tag */ - if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)){ - memcpy(page + page_offset, &eddp->vlan, VLAN_HLEN); - element->length += VLAN_HLEN; - ctx->offset += VLAN_HLEN; - page_offset += VLAN_HLEN; - } - /* add network header */ - memcpy(page + page_offset, (u8 *)&eddp->nh, eddp->nhl); - element->length += eddp->nhl; - eddp->nh_in_ctx = page + page_offset; - ctx->offset += eddp->nhl; - page_offset += eddp->nhl; - /* add transport header */ - memcpy(page + page_offset, (u8 *)&eddp->th, eddp->thl); - element->length += eddp->thl; - eddp->th_in_ctx = page + page_offset; - ctx->offset += eddp->thl; -} - -static void -qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len, - __wsum *hcsum) -{ - struct skb_frag_struct *frag; - int left_in_frag; - int copy_len; - u8 *src; - - QETH_DBF_TEXT(trace, 5, "eddpcdtc"); - if (skb_shinfo(eddp->skb)->nr_frags == 0) { - skb_copy_from_linear_data_offset(eddp->skb, eddp->skb_offset, - dst, len); - *hcsum = csum_partial(eddp->skb->data + eddp->skb_offset, len, - *hcsum); - eddp->skb_offset += len; - } else { - while (len > 0) { - if (eddp->frag < 0) { - /* we're in skb->data */ - left_in_frag = (eddp->skb->len - eddp->skb->data_len) - - eddp->skb_offset; - src = eddp->skb->data + eddp->skb_offset; - } else { - frag = &skb_shinfo(eddp->skb)-> - frags[eddp->frag]; - left_in_frag = frag->size - eddp->frag_offset; - src = (u8 *)( - (page_to_pfn(frag->page) << PAGE_SHIFT)+ - frag->page_offset + eddp->frag_offset); - } - if (left_in_frag <= 0) { - eddp->frag++; - eddp->frag_offset = 0; - continue; - } - copy_len = min(left_in_frag, len); - memcpy(dst, src, copy_len); - *hcsum = csum_partial(src, copy_len, *hcsum); - dst += copy_len; - eddp->frag_offset += copy_len; - eddp->skb_offset += copy_len; - len -= copy_len; - } - } -} - -static void -qeth_eddp_create_segment_data_tcp(struct qeth_eddp_context *ctx, - struct qeth_eddp_data *eddp, int data_len, - __wsum hcsum) -{ - u8 *page; - int page_remainder; - int page_offset; - struct qeth_eddp_element *element; - int first_lap = 1; - - QETH_DBF_TEXT(trace, 5, "eddpcsdt"); - page = ctx->pages[ctx->offset >> PAGE_SHIFT]; - page_offset = ctx->offset % PAGE_SIZE; - element = &ctx->elements[ctx->num_elements]; - while (data_len){ - page_remainder = PAGE_SIZE - page_offset; - if (page_remainder < data_len){ - qeth_eddp_copy_data_tcp(page + page_offset, eddp, - page_remainder, &hcsum); - element->length += page_remainder; - if (first_lap) - element->flags = SBAL_FLAGS_FIRST_FRAG; - else - element->flags = SBAL_FLAGS_MIDDLE_FRAG; - ctx->num_elements++; - element++; - data_len -= page_remainder; - ctx->offset += page_remainder; - page = ctx->pages[ctx->offset >> PAGE_SHIFT]; - page_offset = 0; - element->addr = page + page_offset; - } else { - qeth_eddp_copy_data_tcp(page + page_offset, eddp, - data_len, &hcsum); - element->length += data_len; - if (!first_lap) - element->flags = SBAL_FLAGS_LAST_FRAG; - ctx->num_elements++; - ctx->offset += data_len; - data_len = 0; - } - first_lap = 0; - } - ((struct tcphdr *)eddp->th_in_ctx)->check = csum_fold(hcsum); -} - -static __wsum -qeth_eddp_check_tcp4_hdr(struct qeth_eddp_data *eddp, int data_len) -{ - __wsum phcsum; /* pseudo header checksum */ - - QETH_DBF_TEXT(trace, 5, "eddpckt4"); - eddp->th.tcp.h.check = 0; - /* compute pseudo header checksum */ - phcsum = csum_tcpudp_nofold(eddp->nh.ip4.h.saddr, eddp->nh.ip4.h.daddr, - eddp->thl + data_len, IPPROTO_TCP, 0); - /* compute checksum of tcp header */ - return csum_partial((u8 *)&eddp->th, eddp->thl, phcsum); -} - -static __wsum -qeth_eddp_check_tcp6_hdr(struct qeth_eddp_data *eddp, int data_len) -{ - __be32 proto; - __wsum phcsum; /* pseudo header checksum */ - - QETH_DBF_TEXT(trace, 5, "eddpckt6"); - eddp->th.tcp.h.check = 0; - /* compute pseudo header checksum */ - phcsum = csum_partial((u8 *)&eddp->nh.ip6.h.saddr, - sizeof(struct in6_addr), 0); - phcsum = csum_partial((u8 *)&eddp->nh.ip6.h.daddr, - sizeof(struct in6_addr), phcsum); - proto = htonl(IPPROTO_TCP); - phcsum = csum_partial((u8 *)&proto, sizeof(u32), phcsum); - return phcsum; -} - -static struct qeth_eddp_data * -qeth_eddp_create_eddp_data(struct qeth_hdr *qh, u8 *nh, u8 nhl, u8 *th, u8 thl) -{ - struct qeth_eddp_data *eddp; - - QETH_DBF_TEXT(trace, 5, "eddpcrda"); - eddp = kzalloc(sizeof(struct qeth_eddp_data), GFP_ATOMIC); - if (eddp){ - eddp->nhl = nhl; - eddp->thl = thl; - memcpy(&eddp->qh, qh, sizeof(struct qeth_hdr)); - memcpy(&eddp->nh, nh, nhl); - memcpy(&eddp->th, th, thl); - eddp->frag = -1; /* initially we're in skb->data */ - } - return eddp; -} - -static void -__qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, - struct qeth_eddp_data *eddp) -{ - struct tcphdr *tcph; - int data_len; - __wsum hcsum; - - QETH_DBF_TEXT(trace, 5, "eddpftcp"); - eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl; - if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { - eddp->skb_offset += sizeof(struct ethhdr); -#ifdef CONFIG_QETH_VLAN - if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) - eddp->skb_offset += VLAN_HLEN; -#endif /* CONFIG_QETH_VLAN */ - } - tcph = tcp_hdr(eddp->skb); - while (eddp->skb_offset < eddp->skb->len) { - data_len = min((int)skb_shinfo(eddp->skb)->gso_size, - (int)(eddp->skb->len - eddp->skb_offset)); - /* prepare qdio hdr */ - if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2){ - eddp->qh.hdr.l2.pkt_length = data_len + ETH_HLEN + - eddp->nhl + eddp->thl; -#ifdef CONFIG_QETH_VLAN - if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) - eddp->qh.hdr.l2.pkt_length += VLAN_HLEN; -#endif /* CONFIG_QETH_VLAN */ - } else - eddp->qh.hdr.l3.length = data_len + eddp->nhl + - eddp->thl; - /* prepare ip hdr */ - if (eddp->skb->protocol == htons(ETH_P_IP)){ - eddp->nh.ip4.h.tot_len = htons(data_len + eddp->nhl + - eddp->thl); - eddp->nh.ip4.h.check = 0; - eddp->nh.ip4.h.check = - ip_fast_csum((u8 *)&eddp->nh.ip4.h, - eddp->nh.ip4.h.ihl); - } else - eddp->nh.ip6.h.payload_len = htons(data_len + eddp->thl); - /* prepare tcp hdr */ - if (data_len == (eddp->skb->len - eddp->skb_offset)){ - /* last segment -> set FIN and PSH flags */ - eddp->th.tcp.h.fin = tcph->fin; - eddp->th.tcp.h.psh = tcph->psh; - } - if (eddp->skb->protocol == htons(ETH_P_IP)) - hcsum = qeth_eddp_check_tcp4_hdr(eddp, data_len); - else - hcsum = qeth_eddp_check_tcp6_hdr(eddp, data_len); - /* fill the next segment into the context */ - qeth_eddp_create_segment_hdrs(ctx, eddp, data_len); - qeth_eddp_create_segment_data_tcp(ctx, eddp, data_len, hcsum); - if (eddp->skb_offset >= eddp->skb->len) - break; - /* prepare headers for next round */ - if (eddp->skb->protocol == htons(ETH_P_IP)) - eddp->nh.ip4.h.id = htons(ntohs(eddp->nh.ip4.h.id) + 1); - eddp->th.tcp.h.seq = htonl(ntohl(eddp->th.tcp.h.seq) + data_len); - } -} - -static int -qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, - struct sk_buff *skb, struct qeth_hdr *qhdr) -{ - struct qeth_eddp_data *eddp = NULL; - - QETH_DBF_TEXT(trace, 5, "eddpficx"); - /* create our segmentation headers and copy original headers */ - if (skb->protocol == htons(ETH_P_IP)) - eddp = qeth_eddp_create_eddp_data(qhdr, - skb_network_header(skb), - ip_hdrlen(skb), - skb_transport_header(skb), - tcp_hdrlen(skb)); - else - eddp = qeth_eddp_create_eddp_data(qhdr, - skb_network_header(skb), - sizeof(struct ipv6hdr), - skb_transport_header(skb), - tcp_hdrlen(skb)); - - if (eddp == NULL) { - QETH_DBF_TEXT(trace, 2, "eddpfcnm"); - return -ENOMEM; - } - if (qhdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2) { - skb_set_mac_header(skb, sizeof(struct qeth_hdr)); - memcpy(&eddp->mac, eth_hdr(skb), ETH_HLEN); -#ifdef CONFIG_QETH_VLAN - if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) { - eddp->vlan[0] = skb->protocol; - eddp->vlan[1] = htons(vlan_tx_tag_get(skb)); - } -#endif /* CONFIG_QETH_VLAN */ - } - /* the next flags will only be set on the last segment */ - eddp->th.tcp.h.fin = 0; - eddp->th.tcp.h.psh = 0; - eddp->skb = skb; - /* begin segmentation and fill context */ - __qeth_eddp_fill_context_tcp(ctx, eddp); - kfree(eddp); - return 0; -} - -static void -qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, struct sk_buff *skb, - int hdr_len) -{ - int skbs_per_page; - - QETH_DBF_TEXT(trace, 5, "eddpcanp"); - /* can we put multiple skbs in one page? */ - skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->gso_size + hdr_len); - if (skbs_per_page > 1){ - ctx->num_pages = (skb_shinfo(skb)->gso_segs + 1) / - skbs_per_page + 1; - ctx->elements_per_skb = 1; - } else { - /* no -> how many elements per skb? */ - ctx->elements_per_skb = (skb_shinfo(skb)->gso_size + hdr_len + - PAGE_SIZE) >> PAGE_SHIFT; - ctx->num_pages = ctx->elements_per_skb * - (skb_shinfo(skb)->gso_segs + 1); - } - ctx->num_elements = ctx->elements_per_skb * - (skb_shinfo(skb)->gso_segs + 1); -} - -static struct qeth_eddp_context * -qeth_eddp_create_context_generic(struct qeth_card *card, struct sk_buff *skb, - int hdr_len) -{ - struct qeth_eddp_context *ctx = NULL; - u8 *addr; - int i; - - QETH_DBF_TEXT(trace, 5, "creddpcg"); - /* create the context and allocate pages */ - ctx = kzalloc(sizeof(struct qeth_eddp_context), GFP_ATOMIC); - if (ctx == NULL){ - QETH_DBF_TEXT(trace, 2, "ceddpcn1"); - return NULL; - } - ctx->type = QETH_LARGE_SEND_EDDP; - qeth_eddp_calc_num_pages(ctx, skb, hdr_len); - if (ctx->elements_per_skb > QETH_MAX_BUFFER_ELEMENTS(card)){ - QETH_DBF_TEXT(trace, 2, "ceddpcis"); - kfree(ctx); - return NULL; - } - ctx->pages = kcalloc(ctx->num_pages, sizeof(u8 *), GFP_ATOMIC); - if (ctx->pages == NULL){ - QETH_DBF_TEXT(trace, 2, "ceddpcn2"); - kfree(ctx); - return NULL; - } - for (i = 0; i < ctx->num_pages; ++i){ - addr = (u8 *)__get_free_page(GFP_ATOMIC); - if (addr == NULL){ - QETH_DBF_TEXT(trace, 2, "ceddpcn3"); - ctx->num_pages = i; - qeth_eddp_free_context(ctx); - return NULL; - } - memset(addr, 0, PAGE_SIZE); - ctx->pages[i] = addr; - } - ctx->elements = kcalloc(ctx->num_elements, - sizeof(struct qeth_eddp_element), GFP_ATOMIC); - if (ctx->elements == NULL){ - QETH_DBF_TEXT(trace, 2, "ceddpcn4"); - qeth_eddp_free_context(ctx); - return NULL; - } - /* reset num_elements; will be incremented again in fill_buffer to - * reflect number of actually used elements */ - ctx->num_elements = 0; - return ctx; -} - -static struct qeth_eddp_context * -qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *qhdr) -{ - struct qeth_eddp_context *ctx = NULL; - - QETH_DBF_TEXT(trace, 5, "creddpct"); - if (skb->protocol == htons(ETH_P_IP)) - ctx = qeth_eddp_create_context_generic(card, skb, - (sizeof(struct qeth_hdr) + - ip_hdrlen(skb) + - tcp_hdrlen(skb))); - else if (skb->protocol == htons(ETH_P_IPV6)) - ctx = qeth_eddp_create_context_generic(card, skb, - sizeof(struct qeth_hdr) + sizeof(struct ipv6hdr) + - tcp_hdrlen(skb)); - else - QETH_DBF_TEXT(trace, 2, "cetcpinv"); - - if (ctx == NULL) { - QETH_DBF_TEXT(trace, 2, "creddpnl"); - return NULL; - } - if (qeth_eddp_fill_context_tcp(ctx, skb, qhdr)){ - QETH_DBF_TEXT(trace, 2, "ceddptfe"); - qeth_eddp_free_context(ctx); - return NULL; - } - atomic_set(&ctx->refcnt, 1); - return ctx; -} - -struct qeth_eddp_context * -qeth_eddp_create_context(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *qhdr, unsigned char sk_protocol) -{ - QETH_DBF_TEXT(trace, 5, "creddpc"); - switch (sk_protocol) { - case IPPROTO_TCP: - return qeth_eddp_create_context_tcp(card, skb, qhdr); - default: - QETH_DBF_TEXT(trace, 2, "eddpinvp"); - } - return NULL; -} diff --git a/drivers/s390/net/qeth_eddp.h b/drivers/s390/net/qeth_eddp.h deleted file mode 100644 index 52910c9..0000000 --- a/drivers/s390/net/qeth_eddp.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_eddp.h - * - * Header file for qeth enhanced device driver packing. - * - * Copyright 2004 IBM Corporation - * - * Author(s): Thomas Spatzier - * - */ -#ifndef __QETH_EDDP_H__ -#define __QETH_EDDP_H__ - -struct qeth_eddp_element { - u32 flags; - u32 length; - void *addr; -}; - -struct qeth_eddp_context { - atomic_t refcnt; - enum qeth_large_send_types type; - int num_pages; /* # of allocated pages */ - u8 **pages; /* pointers to pages */ - int offset; /* offset in ctx during creation */ - int num_elements; /* # of required 'SBALEs' */ - struct qeth_eddp_element *elements; /* array of 'SBALEs' */ - int elements_per_skb; /* # of 'SBALEs' per skb **/ -}; - -struct qeth_eddp_context_reference { - struct list_head list; - struct qeth_eddp_context *ctx; -}; - -extern struct qeth_eddp_context * -qeth_eddp_create_context(struct qeth_card *,struct sk_buff *, - struct qeth_hdr *, unsigned char); - -extern void -qeth_eddp_put_context(struct qeth_eddp_context *); - -extern int -qeth_eddp_fill_buffer(struct qeth_qdio_out_q *,struct qeth_eddp_context *,int); - -extern void -qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *); - -extern int -qeth_eddp_check_buffers_for_context(struct qeth_qdio_out_q *, - struct qeth_eddp_context *); -/* - * Data used for fragmenting a IP packet. - */ -struct qeth_eddp_data { - struct qeth_hdr qh; - struct ethhdr mac; - __be16 vlan[2]; - union { - struct { - struct iphdr h; - u8 options[40]; - } ip4; - struct { - struct ipv6hdr h; - } ip6; - } nh; - u8 nhl; - void *nh_in_ctx; /* address of nh within the ctx */ - union { - struct { - struct tcphdr h; - u8 options[40]; - } tcp; - } th; - u8 thl; - void *th_in_ctx; /* address of th within the ctx */ - struct sk_buff *skb; - int skb_offset; - int frag; - int frag_offset; -} __attribute__ ((packed)); - -#endif /* __QETH_EDDP_H__ */ diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h deleted file mode 100644 index 61faf05..0000000 --- a/drivers/s390/net/qeth_fs.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_fs.h - * - * Linux on zSeries OSA Express and HiperSockets support. - * - * This header file contains definitions related to sysfs and procfs. - * - * Copyright 2000,2003 IBM Corporation - * Author(s): Thomas Spatzier - * - */ -#ifndef __QETH_FS_H__ -#define __QETH_FS_H__ - -#ifdef CONFIG_PROC_FS -extern int -qeth_create_procfs_entries(void); - -extern void -qeth_remove_procfs_entries(void); -#else -static inline int -qeth_create_procfs_entries(void) -{ - return 0; -} - -static inline void -qeth_remove_procfs_entries(void) -{ -} -#endif /* CONFIG_PROC_FS */ - -extern int -qeth_create_device_attributes(struct device *dev); - -extern void -qeth_remove_device_attributes(struct device *dev); - -extern int -qeth_create_device_attributes_osn(struct device *dev); - -extern void -qeth_remove_device_attributes_osn(struct device *dev); - -extern int -qeth_create_driver_attributes(void); - -extern void -qeth_remove_driver_attributes(void); - -/* - * utility functions used in qeth_proc.c and qeth_sys.c - */ - -static inline const char * -qeth_get_checksum_str(struct qeth_card *card) -{ - if (card->options.checksum_type == SW_CHECKSUMMING) - return "sw"; - else if (card->options.checksum_type == HW_CHECKSUMMING) - return "hw"; - else - return "no"; -} - -static inline const char * -qeth_get_prioq_str(struct qeth_card *card, char *buf) -{ - if (card->qdio.do_prio_queueing == QETH_NO_PRIO_QUEUEING) - sprintf(buf, "always_q_%i", card->qdio.default_out_queue); - else - strcpy(buf, (card->qdio.do_prio_queueing == - QETH_PRIO_Q_ING_PREC)? - "by_prec." : "by_ToS"); - return buf; -} - -static inline const char * -qeth_get_bufsize_str(struct qeth_card *card) -{ - if (card->qdio.in_buf_size == 16384) - return "16k"; - else if (card->qdio.in_buf_size == 24576) - return "24k"; - else if (card->qdio.in_buf_size == 32768) - return "32k"; - else if (card->qdio.in_buf_size == 40960) - return "40k"; - else - return "64k"; -} - -static inline const char * -qeth_get_cardname(struct qeth_card *card) -{ - if (card->info.guestlan) { - switch (card->info.type) { - case QETH_CARD_TYPE_OSAE: - return " Guest LAN QDIO"; - case QETH_CARD_TYPE_IQD: - return " Guest LAN Hiper"; - default: - return " unknown"; - } - } else { - switch (card->info.type) { - case QETH_CARD_TYPE_OSAE: - return " OSD Express"; - case QETH_CARD_TYPE_IQD: - return " HiperSockets"; - case QETH_CARD_TYPE_OSN: - return " OSN QDIO"; - default: - return " unknown"; - } - } - return " n/a"; -} - -/* max length to be returned: 14 */ -static inline const char * -qeth_get_cardname_short(struct qeth_card *card) -{ - if (card->info.guestlan){ - switch (card->info.type){ - case QETH_CARD_TYPE_OSAE: - return "GuestLAN QDIO"; - case QETH_CARD_TYPE_IQD: - return "GuestLAN Hiper"; - default: - return "unknown"; - } - } else { - switch (card->info.type) { - case QETH_CARD_TYPE_OSAE: - switch (card->info.link_type) { - case QETH_LINK_TYPE_FAST_ETH: - return "OSD_100"; - case QETH_LINK_TYPE_HSTR: - return "HSTR"; - case QETH_LINK_TYPE_GBIT_ETH: - return "OSD_1000"; - case QETH_LINK_TYPE_10GBIT_ETH: - return "OSD_10GIG"; - case QETH_LINK_TYPE_LANE_ETH100: - return "OSD_FE_LANE"; - case QETH_LINK_TYPE_LANE_TR: - return "OSD_TR_LANE"; - case QETH_LINK_TYPE_LANE_ETH1000: - return "OSD_GbE_LANE"; - case QETH_LINK_TYPE_LANE: - return "OSD_ATM_LANE"; - default: - return "OSD_Express"; - } - case QETH_CARD_TYPE_IQD: - return "HiperSockets"; - case QETH_CARD_TYPE_OSN: - return "OSN"; - default: - return "unknown"; - } - } - return "n/a"; -} - -#endif /* __QETH_FS_H__ */ diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c deleted file mode 100644 index 62606ce..0000000 --- a/drivers/s390/net/qeth_main.c +++ /dev/null @@ -1,8956 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_main.c - * - * Linux on zSeries OSA Express and HiperSockets support - * - * Copyright 2000,2003 IBM Corporation - * - * Author(s): Original Code written by - * Utz Bacher (utz.bacher@de.ibm.com) - * Rewritten by - * Frank Pavlic (fpavlic@de.ibm.com) and - * Thomas Spatzier - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "qeth.h" -#include "qeth_mpc.h" -#include "qeth_fs.h" -#include "qeth_eddp.h" -#include "qeth_tso.h" - -static const char *version = "qeth S/390 OSA-Express driver"; - -/** - * Debug Facility Stuff - */ -static debug_info_t *qeth_dbf_setup = NULL; -static debug_info_t *qeth_dbf_data = NULL; -static debug_info_t *qeth_dbf_misc = NULL; -static debug_info_t *qeth_dbf_control = NULL; -debug_info_t *qeth_dbf_trace = NULL; -static debug_info_t *qeth_dbf_sense = NULL; -static debug_info_t *qeth_dbf_qerr = NULL; - -DEFINE_PER_CPU(char[256], qeth_dbf_txt_buf); - -static struct lock_class_key qdio_out_skb_queue_key; - -/** - * some more definitions and declarations - */ -static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY; - -/* list of our cards */ -struct qeth_card_list_struct qeth_card_list; -/*process list want to be notified*/ -spinlock_t qeth_notify_lock; -struct list_head qeth_notify_list; - -static void qeth_send_control_data_cb(struct qeth_channel *, - struct qeth_cmd_buffer *); - -/** - * here we go with function implementation - */ -static void -qeth_init_qdio_info(struct qeth_card *card); - -static int -qeth_init_qdio_queues(struct qeth_card *card); - -static int -qeth_alloc_qdio_buffers(struct qeth_card *card); - -static void -qeth_free_qdio_buffers(struct qeth_card *); - -static void -qeth_clear_qdio_buffers(struct qeth_card *); - -static void -qeth_clear_ip_list(struct qeth_card *, int, int); - -static void -qeth_clear_ipacmd_list(struct qeth_card *); - -static int -qeth_qdio_clear_card(struct qeth_card *, int); - -static void -qeth_clear_working_pool_list(struct qeth_card *); - -static void -qeth_clear_cmd_buffers(struct qeth_channel *); - -static int -qeth_stop(struct net_device *); - -static void -qeth_clear_ipato_list(struct qeth_card *); - -static int -qeth_is_addr_covered_by_ipato(struct qeth_card *, struct qeth_ipaddr *); - -static void -qeth_irq_tasklet(unsigned long); - -static int -qeth_set_online(struct ccwgroup_device *); - -static int -__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode); - -static struct qeth_ipaddr * -qeth_get_addr_buffer(enum qeth_prot_versions); - -static void -qeth_set_multicast_list(struct net_device *); - -static void -qeth_setadp_promisc_mode(struct qeth_card *); - -static int -qeth_hard_header_parse(const struct sk_buff *skb, unsigned char *haddr); - -static void -qeth_notify_processes(void) -{ - /*notify all registered processes */ - struct qeth_notify_list_struct *n_entry; - - QETH_DBF_TEXT(trace,3,"procnoti"); - spin_lock(&qeth_notify_lock); - list_for_each_entry(n_entry, &qeth_notify_list, list) { - send_sig(n_entry->signum, n_entry->task, 1); - } - spin_unlock(&qeth_notify_lock); - -} -int -qeth_notifier_unregister(struct task_struct *p) -{ - struct qeth_notify_list_struct *n_entry, *tmp; - - QETH_DBF_TEXT(trace, 2, "notunreg"); - spin_lock(&qeth_notify_lock); - list_for_each_entry_safe(n_entry, tmp, &qeth_notify_list, list) { - if (n_entry->task == p) { - list_del(&n_entry->list); - kfree(n_entry); - goto out; - } - } -out: - spin_unlock(&qeth_notify_lock); - return 0; -} -int -qeth_notifier_register(struct task_struct *p, int signum) -{ - struct qeth_notify_list_struct *n_entry; - - /*check first if entry already exists*/ - spin_lock(&qeth_notify_lock); - list_for_each_entry(n_entry, &qeth_notify_list, list) { - if (n_entry->task == p) { - n_entry->signum = signum; - spin_unlock(&qeth_notify_lock); - return 0; - } - } - spin_unlock(&qeth_notify_lock); - - n_entry = (struct qeth_notify_list_struct *) - kmalloc(sizeof(struct qeth_notify_list_struct),GFP_KERNEL); - if (!n_entry) - return -ENOMEM; - n_entry->task = p; - n_entry->signum = signum; - spin_lock(&qeth_notify_lock); - list_add(&n_entry->list,&qeth_notify_list); - spin_unlock(&qeth_notify_lock); - return 0; -} - - -/** - * free channel command buffers - */ -static void -qeth_clean_channel(struct qeth_channel *channel) -{ - int cnt; - - QETH_DBF_TEXT(setup, 2, "freech"); - for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) - kfree(channel->iob[cnt].data); -} - -/** - * free card - */ -static void -qeth_free_card(struct qeth_card *card) -{ - - QETH_DBF_TEXT(setup, 2, "freecrd"); - QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); - qeth_clean_channel(&card->read); - qeth_clean_channel(&card->write); - if (card->dev) - free_netdev(card->dev); - qeth_clear_ip_list(card, 0, 0); - qeth_clear_ipato_list(card); - kfree(card->ip_tbd_list); - qeth_free_qdio_buffers(card); - kfree(card); -} - -/** - * alloc memory for command buffer per channel - */ -static int -qeth_setup_channel(struct qeth_channel *channel) -{ - int cnt; - - QETH_DBF_TEXT(setup, 2, "setupch"); - for (cnt=0; cnt < QETH_CMD_BUFFER_NO; cnt++) { - channel->iob[cnt].data = (char *) - kmalloc(QETH_BUFSIZE, GFP_DMA|GFP_KERNEL); - if (channel->iob[cnt].data == NULL) - break; - channel->iob[cnt].state = BUF_STATE_FREE; - channel->iob[cnt].channel = channel; - channel->iob[cnt].callback = qeth_send_control_data_cb; - channel->iob[cnt].rc = 0; - } - if (cnt < QETH_CMD_BUFFER_NO) { - while (cnt-- > 0) - kfree(channel->iob[cnt].data); - return -ENOMEM; - } - channel->buf_no = 0; - channel->io_buf_no = 0; - atomic_set(&channel->irq_pending, 0); - spin_lock_init(&channel->iob_lock); - - init_waitqueue_head(&channel->wait_q); - channel->irq_tasklet.data = (unsigned long) channel; - channel->irq_tasklet.func = qeth_irq_tasklet; - return 0; -} - -/** - * alloc memory for card structure - */ -static struct qeth_card * -qeth_alloc_card(void) -{ - struct qeth_card *card; - - QETH_DBF_TEXT(setup, 2, "alloccrd"); - card = kzalloc(sizeof(struct qeth_card), GFP_DMA|GFP_KERNEL); - if (!card) - return NULL; - QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); - if (qeth_setup_channel(&card->read)) { - kfree(card); - return NULL; - } - if (qeth_setup_channel(&card->write)) { - qeth_clean_channel(&card->read); - kfree(card); - return NULL; - } - return card; -} - -static long -__qeth_check_irb_error(struct ccw_device *cdev, unsigned long intparm, - struct irb *irb) -{ - if (!IS_ERR(irb)) - return 0; - - switch (PTR_ERR(irb)) { - case -EIO: - PRINT_WARN("i/o-error on device %s\n", cdev->dev.bus_id); - QETH_DBF_TEXT(trace, 2, "ckirberr"); - QETH_DBF_TEXT_(trace, 2, " rc%d", -EIO); - break; - case -ETIMEDOUT: - PRINT_WARN("timeout on device %s\n", cdev->dev.bus_id); - QETH_DBF_TEXT(trace, 2, "ckirberr"); - QETH_DBF_TEXT_(trace, 2, " rc%d", -ETIMEDOUT); - if (intparm == QETH_RCD_PARM) { - struct qeth_card *card = CARD_FROM_CDEV(cdev); - - if (card && (card->data.ccwdev == cdev)) { - card->data.state = CH_STATE_DOWN; - wake_up(&card->wait_q); - } - } - break; - default: - PRINT_WARN("unknown error %ld on device %s\n", PTR_ERR(irb), - cdev->dev.bus_id); - QETH_DBF_TEXT(trace, 2, "ckirberr"); - QETH_DBF_TEXT(trace, 2, " rc???"); - } - return PTR_ERR(irb); -} - -static int -qeth_get_problem(struct ccw_device *cdev, struct irb *irb) -{ - int dstat,cstat; - char *sense; - - sense = (char *) irb->ecw; - cstat = irb->scsw.cstat; - dstat = irb->scsw.dstat; - - if (cstat & (SCHN_STAT_CHN_CTRL_CHK | SCHN_STAT_INTF_CTRL_CHK | - SCHN_STAT_CHN_DATA_CHK | SCHN_STAT_CHAIN_CHECK | - SCHN_STAT_PROT_CHECK | SCHN_STAT_PROG_CHECK)) { - QETH_DBF_TEXT(trace,2, "CGENCHK"); - PRINT_WARN("check on device %s, dstat=x%x, cstat=x%x ", - cdev->dev.bus_id, dstat, cstat); - HEXDUMP16(WARN, "irb: ", irb); - HEXDUMP16(WARN, "irb: ", ((char *) irb) + 32); - return 1; - } - - if (dstat & DEV_STAT_UNIT_CHECK) { - if (sense[SENSE_RESETTING_EVENT_BYTE] & - SENSE_RESETTING_EVENT_FLAG) { - QETH_DBF_TEXT(trace,2,"REVIND"); - return 1; - } - if (sense[SENSE_COMMAND_REJECT_BYTE] & - SENSE_COMMAND_REJECT_FLAG) { - QETH_DBF_TEXT(trace,2,"CMDREJi"); - return 0; - } - if ((sense[2] == 0xaf) && (sense[3] == 0xfe)) { - QETH_DBF_TEXT(trace,2,"AFFE"); - return 1; - } - if ((!sense[0]) && (!sense[1]) && (!sense[2]) && (!sense[3])) { - QETH_DBF_TEXT(trace,2,"ZEROSEN"); - return 0; - } - QETH_DBF_TEXT(trace,2,"DGENCHK"); - return 1; - } - return 0; -} -static int qeth_issue_next_read(struct qeth_card *); - -/** - * interrupt handler - */ -static void -qeth_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) -{ - int rc; - int cstat,dstat; - struct qeth_cmd_buffer *buffer; - struct qeth_channel *channel; - struct qeth_card *card; - - QETH_DBF_TEXT(trace,5,"irq"); - - if (__qeth_check_irb_error(cdev, intparm, irb)) - return; - cstat = irb->scsw.cstat; - dstat = irb->scsw.dstat; - - card = CARD_FROM_CDEV(cdev); - if (!card) - return; - - if (card->read.ccwdev == cdev){ - channel = &card->read; - QETH_DBF_TEXT(trace,5,"read"); - } else if (card->write.ccwdev == cdev) { - channel = &card->write; - QETH_DBF_TEXT(trace,5,"write"); - } else { - channel = &card->data; - QETH_DBF_TEXT(trace,5,"data"); - } - atomic_set(&channel->irq_pending, 0); - - if (irb->scsw.fctl & (SCSW_FCTL_CLEAR_FUNC)) - channel->state = CH_STATE_STOPPED; - - if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC)) - channel->state = CH_STATE_HALTED; - - /*let's wake up immediately on data channel*/ - if ((channel == &card->data) && (intparm != 0) && - (intparm != QETH_RCD_PARM)) - goto out; - - if (intparm == QETH_CLEAR_CHANNEL_PARM) { - QETH_DBF_TEXT(trace, 6, "clrchpar"); - /* we don't have to handle this further */ - intparm = 0; - } - if (intparm == QETH_HALT_CHANNEL_PARM) { - QETH_DBF_TEXT(trace, 6, "hltchpar"); - /* we don't have to handle this further */ - intparm = 0; - } - if ((dstat & DEV_STAT_UNIT_EXCEP) || - (dstat & DEV_STAT_UNIT_CHECK) || - (cstat)) { - if (irb->esw.esw0.erw.cons) { - /* TODO: we should make this s390dbf */ - PRINT_WARN("sense data available on channel %s.\n", - CHANNEL_ID(channel)); - PRINT_WARN(" cstat 0x%X\n dstat 0x%X\n", cstat, dstat); - HEXDUMP16(WARN,"irb: ",irb); - HEXDUMP16(WARN,"sense data: ",irb->ecw); - } - if (intparm == QETH_RCD_PARM) { - channel->state = CH_STATE_DOWN; - goto out; - } - rc = qeth_get_problem(cdev,irb); - if (rc) { - qeth_schedule_recovery(card); - goto out; - } - } - - if (intparm == QETH_RCD_PARM) { - channel->state = CH_STATE_RCD_DONE; - goto out; - } - if (intparm) { - buffer = (struct qeth_cmd_buffer *) __va((addr_t)intparm); - buffer->state = BUF_STATE_PROCESSED; - } - if (channel == &card->data) - return; - - if (channel == &card->read && - channel->state == CH_STATE_UP) - qeth_issue_next_read(card); - - qeth_irq_tasklet((unsigned long)channel); - return; -out: - wake_up(&card->wait_q); -} - -/** - * tasklet function scheduled from irq handler - */ -static void -qeth_irq_tasklet(unsigned long data) -{ - struct qeth_card *card; - struct qeth_channel *channel; - struct qeth_cmd_buffer *iob; - __u8 index; - - QETH_DBF_TEXT(trace,5,"irqtlet"); - channel = (struct qeth_channel *) data; - iob = channel->iob; - index = channel->buf_no; - card = CARD_FROM_CDEV(channel->ccwdev); - while (iob[index].state == BUF_STATE_PROCESSED) { - if (iob[index].callback !=NULL) { - iob[index].callback(channel,iob + index); - } - index = (index + 1) % QETH_CMD_BUFFER_NO; - } - channel->buf_no = index; - wake_up(&card->wait_q); -} - -static int qeth_stop_card(struct qeth_card *, int); - -static int -__qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) -{ - struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data; - int rc = 0, rc2 = 0, rc3 = 0; - enum qeth_card_states recover_flag; - - QETH_DBF_TEXT(setup, 3, "setoffl"); - QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); - - if (card->dev && netif_carrier_ok(card->dev)) - netif_carrier_off(card->dev); - recover_flag = card->state; - if (qeth_stop_card(card, recovery_mode) == -ERESTARTSYS){ - PRINT_WARN("Stopping card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } - rc = ccw_device_set_offline(CARD_DDEV(card)); - rc2 = ccw_device_set_offline(CARD_WDEV(card)); - rc3 = ccw_device_set_offline(CARD_RDEV(card)); - if (!rc) - rc = (rc2) ? rc2 : rc3; - if (rc) - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - if (recover_flag == CARD_STATE_UP) - card->state = CARD_STATE_RECOVER; - qeth_notify_processes(); - return 0; -} - -static int -qeth_set_offline(struct ccwgroup_device *cgdev) -{ - return __qeth_set_offline(cgdev, 0); -} - -static int -qeth_threads_running(struct qeth_card *card, unsigned long threads); - - -static void -qeth_remove_device(struct ccwgroup_device *cgdev) -{ - struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data; - unsigned long flags; - - QETH_DBF_TEXT(setup, 3, "rmdev"); - QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); - - if (!card) - return; - - wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0); - - if (cgdev->state == CCWGROUP_ONLINE){ - card->use_hard_stop = 1; - qeth_set_offline(cgdev); - } - /* remove form our internal list */ - write_lock_irqsave(&qeth_card_list.rwlock, flags); - list_del(&card->list); - write_unlock_irqrestore(&qeth_card_list.rwlock, flags); - if (card->dev) - unregister_netdev(card->dev); - qeth_remove_device_attributes(&cgdev->dev); - qeth_free_card(card); - cgdev->dev.driver_data = NULL; - put_device(&cgdev->dev); -} - -static int -qeth_register_addr_entry(struct qeth_card *, struct qeth_ipaddr *); -static int -qeth_deregister_addr_entry(struct qeth_card *, struct qeth_ipaddr *); - -/** - * Add/remove address to/from card's ip list, i.e. try to add or remove - * reference to/from an IP address that is already registered on the card. - * Returns: - * 0 address was on card and its reference count has been adjusted, - * but is still > 0, so nothing has to be done - * also returns 0 if card was not on card and the todo was to delete - * the address -> there is also nothing to be done - * 1 address was not on card and the todo is to add it to the card's ip - * list - * -1 address was on card and its reference count has been decremented - * to <= 0 by the todo -> address must be removed from card - */ -static int -__qeth_ref_ip_on_card(struct qeth_card *card, struct qeth_ipaddr *todo, - struct qeth_ipaddr **__addr) -{ - struct qeth_ipaddr *addr; - int found = 0; - - list_for_each_entry(addr, &card->ip_list, entry) { - if (card->options.layer2) { - if ((addr->type == todo->type) && - (memcmp(&addr->mac, &todo->mac, - OSA_ADDR_LEN) == 0)) { - found = 1; - break; - } - continue; - } - if ((addr->proto == QETH_PROT_IPV4) && - (todo->proto == QETH_PROT_IPV4) && - (addr->type == todo->type) && - (addr->u.a4.addr == todo->u.a4.addr) && - (addr->u.a4.mask == todo->u.a4.mask)) { - found = 1; - break; - } - if ((addr->proto == QETH_PROT_IPV6) && - (todo->proto == QETH_PROT_IPV6) && - (addr->type == todo->type) && - (addr->u.a6.pfxlen == todo->u.a6.pfxlen) && - (memcmp(&addr->u.a6.addr, &todo->u.a6.addr, - sizeof(struct in6_addr)) == 0)) { - found = 1; - break; - } - } - if (found) { - addr->users += todo->users; - if (addr->users <= 0){ - *__addr = addr; - return -1; - } else { - /* for VIPA and RXIP limit refcount to 1 */ - if (addr->type != QETH_IP_TYPE_NORMAL) - addr->users = 1; - return 0; - } - } - if (todo->users > 0) { - /* for VIPA and RXIP limit refcount to 1 */ - if (todo->type != QETH_IP_TYPE_NORMAL) - todo->users = 1; - return 1; - } else - return 0; -} - -static int -__qeth_address_exists_in_list(struct list_head *list, struct qeth_ipaddr *addr, - int same_type) -{ - struct qeth_ipaddr *tmp; - - list_for_each_entry(tmp, list, entry) { - if ((tmp->proto == QETH_PROT_IPV4) && - (addr->proto == QETH_PROT_IPV4) && - ((same_type && (tmp->type == addr->type)) || - (!same_type && (tmp->type != addr->type)) ) && - (tmp->u.a4.addr == addr->u.a4.addr) ){ - return 1; - } - if ((tmp->proto == QETH_PROT_IPV6) && - (addr->proto == QETH_PROT_IPV6) && - ((same_type && (tmp->type == addr->type)) || - (!same_type && (tmp->type != addr->type)) ) && - (memcmp(&tmp->u.a6.addr, &addr->u.a6.addr, - sizeof(struct in6_addr)) == 0) ) { - return 1; - } - } - return 0; -} - -/* - * Add IP to be added to todo list. If there is already an "add todo" - * in this list we just incremenent the reference count. - * Returns 0 if we just incremented reference count. - */ -static int -__qeth_insert_ip_todo(struct qeth_card *card, struct qeth_ipaddr *addr, int add) -{ - struct qeth_ipaddr *tmp, *t; - int found = 0; - - list_for_each_entry_safe(tmp, t, card->ip_tbd_list, entry) { - if ((addr->type == QETH_IP_TYPE_DEL_ALL_MC) && - (tmp->type == QETH_IP_TYPE_DEL_ALL_MC)) - return 0; - if (card->options.layer2) { - if ((tmp->type == addr->type) && - (tmp->is_multicast == addr->is_multicast) && - (memcmp(&tmp->mac, &addr->mac, - OSA_ADDR_LEN) == 0)) { - found = 1; - break; - } - continue; - } - if ((tmp->proto == QETH_PROT_IPV4) && - (addr->proto == QETH_PROT_IPV4) && - (tmp->type == addr->type) && - (tmp->is_multicast == addr->is_multicast) && - (tmp->u.a4.addr == addr->u.a4.addr) && - (tmp->u.a4.mask == addr->u.a4.mask)) { - found = 1; - break; - } - if ((tmp->proto == QETH_PROT_IPV6) && - (addr->proto == QETH_PROT_IPV6) && - (tmp->type == addr->type) && - (tmp->is_multicast == addr->is_multicast) && - (tmp->u.a6.pfxlen == addr->u.a6.pfxlen) && - (memcmp(&tmp->u.a6.addr, &addr->u.a6.addr, - sizeof(struct in6_addr)) == 0)) { - found = 1; - break; - } - } - if (found){ - if (addr->users != 0) - tmp->users += addr->users; - else - tmp->users += add? 1:-1; - if (tmp->users == 0) { - list_del(&tmp->entry); - kfree(tmp); - } - return 0; - } else { - if (addr->type == QETH_IP_TYPE_DEL_ALL_MC) - list_add(&addr->entry, card->ip_tbd_list); - else { - if (addr->users == 0) - addr->users += add? 1:-1; - if (add && (addr->type == QETH_IP_TYPE_NORMAL) && - qeth_is_addr_covered_by_ipato(card, addr)){ - QETH_DBF_TEXT(trace, 2, "tkovaddr"); - addr->set_flags |= QETH_IPA_SETIP_TAKEOVER_FLAG; - } - list_add_tail(&addr->entry, card->ip_tbd_list); - } - return 1; - } -} - -/** - * Remove IP address from list - */ -static int -qeth_delete_ip(struct qeth_card *card, struct qeth_ipaddr *addr) -{ - unsigned long flags; - int rc = 0; - - QETH_DBF_TEXT(trace, 4, "delip"); - - if (card->options.layer2) - QETH_DBF_HEX(trace, 4, &addr->mac, 6); - else if (addr->proto == QETH_PROT_IPV4) - QETH_DBF_HEX(trace, 4, &addr->u.a4.addr, 4); - else { - QETH_DBF_HEX(trace, 4, &addr->u.a6.addr, 8); - QETH_DBF_HEX(trace, 4, ((char *)&addr->u.a6.addr) + 8, 8); - } - spin_lock_irqsave(&card->ip_lock, flags); - rc = __qeth_insert_ip_todo(card, addr, 0); - spin_unlock_irqrestore(&card->ip_lock, flags); - return rc; -} - -static int -qeth_add_ip(struct qeth_card *card, struct qeth_ipaddr *addr) -{ - unsigned long flags; - int rc = 0; - - QETH_DBF_TEXT(trace, 4, "addip"); - if (card->options.layer2) - QETH_DBF_HEX(trace, 4, &addr->mac, 6); - else if (addr->proto == QETH_PROT_IPV4) - QETH_DBF_HEX(trace, 4, &addr->u.a4.addr, 4); - else { - QETH_DBF_HEX(trace, 4, &addr->u.a6.addr, 8); - QETH_DBF_HEX(trace, 4, ((char *)&addr->u.a6.addr) + 8, 8); - } - spin_lock_irqsave(&card->ip_lock, flags); - rc = __qeth_insert_ip_todo(card, addr, 1); - spin_unlock_irqrestore(&card->ip_lock, flags); - return rc; -} - -static void -__qeth_delete_all_mc(struct qeth_card *card, unsigned long *flags) -{ - struct qeth_ipaddr *addr, *tmp; - int rc; -again: - list_for_each_entry_safe(addr, tmp, &card->ip_list, entry) { - if (addr->is_multicast) { - list_del(&addr->entry); - spin_unlock_irqrestore(&card->ip_lock, *flags); - rc = qeth_deregister_addr_entry(card, addr); - spin_lock_irqsave(&card->ip_lock, *flags); - if (!rc) { - kfree(addr); - goto again; - } else - list_add(&addr->entry, &card->ip_list); - } - } -} - -static void -qeth_set_ip_addr_list(struct qeth_card *card) -{ - struct list_head *tbd_list; - struct qeth_ipaddr *todo, *addr; - unsigned long flags; - int rc; - - QETH_DBF_TEXT(trace, 2, "sdiplist"); - QETH_DBF_HEX(trace, 2, &card, sizeof(void *)); - - spin_lock_irqsave(&card->ip_lock, flags); - tbd_list = card->ip_tbd_list; - card->ip_tbd_list = kmalloc(sizeof(struct list_head), GFP_ATOMIC); - if (!card->ip_tbd_list) { - QETH_DBF_TEXT(trace, 0, "silnomem"); - card->ip_tbd_list = tbd_list; - spin_unlock_irqrestore(&card->ip_lock, flags); - return; - } else - INIT_LIST_HEAD(card->ip_tbd_list); - - while (!list_empty(tbd_list)){ - todo = list_entry(tbd_list->next, struct qeth_ipaddr, entry); - list_del(&todo->entry); - if (todo->type == QETH_IP_TYPE_DEL_ALL_MC){ - __qeth_delete_all_mc(card, &flags); - kfree(todo); - continue; - } - rc = __qeth_ref_ip_on_card(card, todo, &addr); - if (rc == 0) { - /* nothing to be done; only adjusted refcount */ - kfree(todo); - } else if (rc == 1) { - /* new entry to be added to on-card list */ - spin_unlock_irqrestore(&card->ip_lock, flags); - rc = qeth_register_addr_entry(card, todo); - spin_lock_irqsave(&card->ip_lock, flags); - if (!rc) - list_add_tail(&todo->entry, &card->ip_list); - else - kfree(todo); - } else if (rc == -1) { - /* on-card entry to be removed */ - list_del_init(&addr->entry); - spin_unlock_irqrestore(&card->ip_lock, flags); - rc = qeth_deregister_addr_entry(card, addr); - spin_lock_irqsave(&card->ip_lock, flags); - if (!rc) - kfree(addr); - else - list_add_tail(&addr->entry, &card->ip_list); - kfree(todo); - } - } - spin_unlock_irqrestore(&card->ip_lock, flags); - kfree(tbd_list); -} - -static void qeth_delete_mc_addresses(struct qeth_card *); -static void qeth_add_multicast_ipv4(struct qeth_card *); -static void qeth_layer2_add_multicast(struct qeth_card *); -#ifdef CONFIG_QETH_IPV6 -static void qeth_add_multicast_ipv6(struct qeth_card *); -#endif - -static int -qeth_set_thread_start_bit(struct qeth_card *card, unsigned long thread) -{ - unsigned long flags; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - if ( !(card->thread_allowed_mask & thread) || - (card->thread_start_mask & thread) ) { - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - return -EPERM; - } - card->thread_start_mask |= thread; - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - return 0; -} - -static void -qeth_clear_thread_start_bit(struct qeth_card *card, unsigned long thread) -{ - unsigned long flags; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - card->thread_start_mask &= ~thread; - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - wake_up(&card->wait_q); -} - -static void -qeth_clear_thread_running_bit(struct qeth_card *card, unsigned long thread) -{ - unsigned long flags; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - card->thread_running_mask &= ~thread; - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - wake_up(&card->wait_q); -} - -static int -__qeth_do_run_thread(struct qeth_card *card, unsigned long thread) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - if (card->thread_start_mask & thread){ - if ((card->thread_allowed_mask & thread) && - !(card->thread_running_mask & thread)){ - rc = 1; - card->thread_start_mask &= ~thread; - card->thread_running_mask |= thread; - } else - rc = -EPERM; - } - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - return rc; -} - -static int -qeth_do_run_thread(struct qeth_card *card, unsigned long thread) -{ - int rc = 0; - - wait_event(card->wait_q, - (rc = __qeth_do_run_thread(card, thread)) >= 0); - return rc; -} - -static int -qeth_recover(void *ptr) -{ - struct qeth_card *card; - int rc = 0; - - card = (struct qeth_card *) ptr; - daemonize("qeth_recover"); - QETH_DBF_TEXT(trace,2,"recover1"); - QETH_DBF_HEX(trace, 2, &card, sizeof(void *)); - if (!qeth_do_run_thread(card, QETH_RECOVER_THREAD)) - return 0; - QETH_DBF_TEXT(trace,2,"recover2"); - PRINT_WARN("Recovery of device %s started ...\n", - CARD_BUS_ID(card)); - card->use_hard_stop = 1; - __qeth_set_offline(card->gdev,1); - rc = __qeth_set_online(card->gdev,1); - /* don't run another scheduled recovery */ - qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); - qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); - if (!rc) - PRINT_INFO("Device %s successfully recovered!\n", - CARD_BUS_ID(card)); - else - PRINT_INFO("Device %s could not be recovered!\n", - CARD_BUS_ID(card)); - return 0; -} - -void -qeth_schedule_recovery(struct qeth_card *card) -{ - QETH_DBF_TEXT(trace,2,"startrec"); - if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0) - schedule_work(&card->kernel_thread_starter); -} - -static int -qeth_do_start_thread(struct qeth_card *card, unsigned long thread) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - QETH_DBF_TEXT_(trace, 4, " %02x%02x%02x", - (u8) card->thread_start_mask, - (u8) card->thread_allowed_mask, - (u8) card->thread_running_mask); - rc = (card->thread_start_mask & thread); - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - return rc; -} - -static void -qeth_start_kernel_thread(struct work_struct *work) -{ - struct qeth_card *card = container_of(work, struct qeth_card, kernel_thread_starter); - QETH_DBF_TEXT(trace , 2, "strthrd"); - - if (card->read.state != CH_STATE_UP && - card->write.state != CH_STATE_UP) - return; - if (qeth_do_start_thread(card, QETH_RECOVER_THREAD)) - kernel_thread(qeth_recover, (void *) card, SIGCHLD); -} - - -static void -qeth_set_intial_options(struct qeth_card *card) -{ - card->options.route4.type = NO_ROUTER; -#ifdef CONFIG_QETH_IPV6 - card->options.route6.type = NO_ROUTER; -#endif /* QETH_IPV6 */ - card->options.checksum_type = QETH_CHECKSUM_DEFAULT; - card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; - card->options.macaddr_mode = QETH_TR_MACADDR_NONCANONICAL; - card->options.fake_broadcast = 0; - card->options.add_hhlen = DEFAULT_ADD_HHLEN; - card->options.fake_ll = 0; - if (card->info.type == QETH_CARD_TYPE_OSN) - card->options.layer2 = 1; - else - card->options.layer2 = 0; - card->options.performance_stats = 0; - card->options.rx_sg_cb = QETH_RX_SG_CB; -} - -/** - * initialize channels ,card and all state machines - */ -static int -qeth_setup_card(struct qeth_card *card) -{ - - QETH_DBF_TEXT(setup, 2, "setupcrd"); - QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); - - card->read.state = CH_STATE_DOWN; - card->write.state = CH_STATE_DOWN; - card->data.state = CH_STATE_DOWN; - card->state = CARD_STATE_DOWN; - card->lan_online = 0; - card->use_hard_stop = 0; - card->dev = NULL; -#ifdef CONFIG_QETH_VLAN - spin_lock_init(&card->vlanlock); - card->vlangrp = NULL; -#endif - spin_lock_init(&card->lock); - spin_lock_init(&card->ip_lock); - spin_lock_init(&card->thread_mask_lock); - card->thread_start_mask = 0; - card->thread_allowed_mask = 0; - card->thread_running_mask = 0; - INIT_WORK(&card->kernel_thread_starter, qeth_start_kernel_thread); - INIT_LIST_HEAD(&card->ip_list); - card->ip_tbd_list = kmalloc(sizeof(struct list_head), GFP_KERNEL); - if (!card->ip_tbd_list) { - QETH_DBF_TEXT(setup, 0, "iptbdnom"); - return -ENOMEM; - } - INIT_LIST_HEAD(card->ip_tbd_list); - INIT_LIST_HEAD(&card->cmd_waiter_list); - init_waitqueue_head(&card->wait_q); - /* intial options */ - qeth_set_intial_options(card); - /* IP address takeover */ - INIT_LIST_HEAD(&card->ipato.entries); - card->ipato.enabled = 0; - card->ipato.invert4 = 0; - card->ipato.invert6 = 0; - /* init QDIO stuff */ - qeth_init_qdio_info(card); - return 0; -} - -static int -is_1920_device (struct qeth_card *card) -{ - int single_queue = 0; - struct ccw_device *ccwdev; - struct channelPath_dsc { - u8 flags; - u8 lsn; - u8 desc; - u8 chpid; - u8 swla; - u8 zeroes; - u8 chla; - u8 chpp; - } *chp_dsc; - - QETH_DBF_TEXT(setup, 2, "chk_1920"); - - ccwdev = card->data.ccwdev; - chp_dsc = (struct channelPath_dsc *)ccw_device_get_chp_desc(ccwdev, 0); - if (chp_dsc != NULL) { - /* CHPP field bit 6 == 1 -> single queue */ - single_queue = ((chp_dsc->chpp & 0x02) == 0x02); - kfree(chp_dsc); - } - QETH_DBF_TEXT_(setup, 2, "rc:%x", single_queue); - return single_queue; -} - -static int -qeth_determine_card_type(struct qeth_card *card) -{ - int i = 0; - - QETH_DBF_TEXT(setup, 2, "detcdtyp"); - - card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; - card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; - while (known_devices[i][4]) { - if ((CARD_RDEV(card)->id.dev_type == known_devices[i][2]) && - (CARD_RDEV(card)->id.dev_model == known_devices[i][3])) { - card->info.type = known_devices[i][4]; - card->qdio.no_out_queues = known_devices[i][8]; - card->info.is_multicast_different = known_devices[i][9]; - if (is_1920_device(card)) { - PRINT_INFO("Priority Queueing not able " - "due to hardware limitations!\n"); - card->qdio.no_out_queues = 1; - card->qdio.default_out_queue = 0; - } - return 0; - } - i++; - } - card->info.type = QETH_CARD_TYPE_UNKNOWN; - PRINT_ERR("unknown card type on device %s\n", CARD_BUS_ID(card)); - return -ENOENT; -} - -static int -qeth_probe_device(struct ccwgroup_device *gdev) -{ - struct qeth_card *card; - struct device *dev; - unsigned long flags; - int rc; - - QETH_DBF_TEXT(setup, 2, "probedev"); - - dev = &gdev->dev; - if (!get_device(dev)) - return -ENODEV; - - QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id); - - card = qeth_alloc_card(); - if (!card) { - put_device(dev); - QETH_DBF_TEXT_(setup, 2, "1err%d", -ENOMEM); - return -ENOMEM; - } - card->read.ccwdev = gdev->cdev[0]; - card->write.ccwdev = gdev->cdev[1]; - card->data.ccwdev = gdev->cdev[2]; - gdev->dev.driver_data = card; - card->gdev = gdev; - gdev->cdev[0]->handler = qeth_irq; - gdev->cdev[1]->handler = qeth_irq; - gdev->cdev[2]->handler = qeth_irq; - - if ((rc = qeth_determine_card_type(card))){ - PRINT_WARN("%s: not a valid card type\n", __func__); - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - put_device(dev); - qeth_free_card(card); - return rc; - } - if ((rc = qeth_setup_card(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - put_device(dev); - qeth_free_card(card); - return rc; - } - rc = qeth_create_device_attributes(dev); - if (rc) { - put_device(dev); - qeth_free_card(card); - return rc; - } - /* insert into our internal list */ - write_lock_irqsave(&qeth_card_list.rwlock, flags); - list_add_tail(&card->list, &qeth_card_list.list); - write_unlock_irqrestore(&qeth_card_list.rwlock, flags); - return rc; -} - - -static int qeth_read_conf_data(struct qeth_card *card, void **buffer, - int *length) -{ - struct ciw *ciw; - char *rcd_buf; - int ret; - struct qeth_channel *channel = &card->data; - unsigned long flags; - - /* - * scan for RCD command in extended SenseID data - */ - ciw = ccw_device_get_ciw(channel->ccwdev, CIW_TYPE_RCD); - if (!ciw || ciw->cmd == 0) - return -EOPNOTSUPP; - rcd_buf = kzalloc(ciw->count, GFP_KERNEL | GFP_DMA); - if (!rcd_buf) - return -ENOMEM; - - channel->ccw.cmd_code = ciw->cmd; - channel->ccw.cda = (__u32) __pa (rcd_buf); - channel->ccw.count = ciw->count; - channel->ccw.flags = CCW_FLAG_SLI; - channel->state = CH_STATE_RCD; - spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); - ret = ccw_device_start_timeout(channel->ccwdev, &channel->ccw, - QETH_RCD_PARM, LPM_ANYPATH, 0, - QETH_RCD_TIMEOUT); - spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); - if (!ret) - wait_event(card->wait_q, - (channel->state == CH_STATE_RCD_DONE || - channel->state == CH_STATE_DOWN)); - if (channel->state == CH_STATE_DOWN) - ret = -EIO; - else - channel->state = CH_STATE_DOWN; - if (ret) { - kfree(rcd_buf); - *buffer = NULL; - *length = 0; - } else { - *length = ciw->count; - *buffer = rcd_buf; - } - return ret; -} - -static int -qeth_get_unitaddr(struct qeth_card *card) -{ - int length; - char *prcd; - int rc; - - QETH_DBF_TEXT(setup, 2, "getunit"); - rc = qeth_read_conf_data(card, (void **) &prcd, &length); - if (rc) { - PRINT_ERR("qeth_read_conf_data for device %s returned %i\n", - CARD_DDEV_ID(card), rc); - return rc; - } - card->info.chpid = prcd[30]; - card->info.unit_addr2 = prcd[31]; - card->info.cula = prcd[63]; - card->info.guestlan = ((prcd[0x10] == _ascebc['V']) && - (prcd[0x11] == _ascebc['M'])); - kfree(prcd); - return 0; -} - -static void -qeth_init_tokens(struct qeth_card *card) -{ - card->token.issuer_rm_w = 0x00010103UL; - card->token.cm_filter_w = 0x00010108UL; - card->token.cm_connection_w = 0x0001010aUL; - card->token.ulp_filter_w = 0x0001010bUL; - card->token.ulp_connection_w = 0x0001010dUL; -} - -static inline __u16 -raw_devno_from_bus_id(char *id) -{ - id += (strlen(id) - 4); - return (__u16) simple_strtoul(id, &id, 16); -} -/** - * setup channel - */ -static void -qeth_setup_ccw(struct qeth_channel *channel,unsigned char *iob, __u32 len) -{ - struct qeth_card *card; - - QETH_DBF_TEXT(trace, 4, "setupccw"); - card = CARD_FROM_CDEV(channel->ccwdev); - if (channel == &card->read) - memcpy(&channel->ccw, READ_CCW, sizeof(struct ccw1)); - else - memcpy(&channel->ccw, WRITE_CCW, sizeof(struct ccw1)); - channel->ccw.count = len; - channel->ccw.cda = (__u32) __pa(iob); -} - -/** - * get free buffer for ccws (IDX activation, lancmds,ipassists...) - */ -static struct qeth_cmd_buffer * -__qeth_get_buffer(struct qeth_channel *channel) -{ - __u8 index; - - QETH_DBF_TEXT(trace, 6, "getbuff"); - index = channel->io_buf_no; - do { - if (channel->iob[index].state == BUF_STATE_FREE) { - channel->iob[index].state = BUF_STATE_LOCKED; - channel->io_buf_no = (channel->io_buf_no + 1) % - QETH_CMD_BUFFER_NO; - memset(channel->iob[index].data, 0, QETH_BUFSIZE); - return channel->iob + index; - } - index = (index + 1) % QETH_CMD_BUFFER_NO; - } while(index != channel->io_buf_no); - - return NULL; -} - -/** - * release command buffer - */ -static void -qeth_release_buffer(struct qeth_channel *channel, struct qeth_cmd_buffer *iob) -{ - unsigned long flags; - - QETH_DBF_TEXT(trace, 6, "relbuff"); - spin_lock_irqsave(&channel->iob_lock, flags); - memset(iob->data, 0, QETH_BUFSIZE); - iob->state = BUF_STATE_FREE; - iob->callback = qeth_send_control_data_cb; - iob->rc = 0; - spin_unlock_irqrestore(&channel->iob_lock, flags); -} - -static struct qeth_cmd_buffer * -qeth_get_buffer(struct qeth_channel *channel) -{ - struct qeth_cmd_buffer *buffer = NULL; - unsigned long flags; - - spin_lock_irqsave(&channel->iob_lock, flags); - buffer = __qeth_get_buffer(channel); - spin_unlock_irqrestore(&channel->iob_lock, flags); - return buffer; -} - -static struct qeth_cmd_buffer * -qeth_wait_for_buffer(struct qeth_channel *channel) -{ - struct qeth_cmd_buffer *buffer; - wait_event(channel->wait_q, - ((buffer = qeth_get_buffer(channel)) != NULL)); - return buffer; -} - -static void -qeth_clear_cmd_buffers(struct qeth_channel *channel) -{ - int cnt; - - for (cnt=0; cnt < QETH_CMD_BUFFER_NO; cnt++) - qeth_release_buffer(channel,&channel->iob[cnt]); - channel->buf_no = 0; - channel->io_buf_no = 0; -} - -/** - * start IDX for read and write channel - */ -static int -qeth_idx_activate_get_answer(struct qeth_channel *channel, - void (*idx_reply_cb)(struct qeth_channel *, - struct qeth_cmd_buffer *)) -{ - struct qeth_cmd_buffer *iob; - unsigned long flags; - int rc; - struct qeth_card *card; - - QETH_DBF_TEXT(setup, 2, "idxanswr"); - card = CARD_FROM_CDEV(channel->ccwdev); - iob = qeth_get_buffer(channel); - iob->callback = idx_reply_cb; - memcpy(&channel->ccw, READ_CCW, sizeof(struct ccw1)); - channel->ccw.count = QETH_BUFSIZE; - channel->ccw.cda = (__u32) __pa(iob->data); - - wait_event(card->wait_q, - atomic_cmpxchg(&channel->irq_pending, 0, 1) == 0); - QETH_DBF_TEXT(setup, 6, "noirqpnd"); - spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); - rc = ccw_device_start(channel->ccwdev, - &channel->ccw,(addr_t) iob, 0, 0); - spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); - - if (rc) { - PRINT_ERR("qeth: Error2 in activating channel rc=%d\n",rc); - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - atomic_set(&channel->irq_pending, 0); - wake_up(&card->wait_q); - return rc; - } - rc = wait_event_interruptible_timeout(card->wait_q, - channel->state == CH_STATE_UP, QETH_TIMEOUT); - if (rc == -ERESTARTSYS) - return rc; - if (channel->state != CH_STATE_UP){ - rc = -ETIME; - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - qeth_clear_cmd_buffers(channel); - } else - rc = 0; - return rc; -} - -static int -qeth_idx_activate_channel(struct qeth_channel *channel, - void (*idx_reply_cb)(struct qeth_channel *, - struct qeth_cmd_buffer *)) -{ - struct qeth_card *card; - struct qeth_cmd_buffer *iob; - unsigned long flags; - __u16 temp; - int rc; - - card = CARD_FROM_CDEV(channel->ccwdev); - - QETH_DBF_TEXT(setup, 2, "idxactch"); - - iob = qeth_get_buffer(channel); - iob->callback = idx_reply_cb; - memcpy(&channel->ccw, WRITE_CCW, sizeof(struct ccw1)); - channel->ccw.count = IDX_ACTIVATE_SIZE; - channel->ccw.cda = (__u32) __pa(iob->data); - if (channel == &card->write) { - memcpy(iob->data, IDX_ACTIVATE_WRITE, IDX_ACTIVATE_SIZE); - memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), - &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.trans_hdr++; - } else { - memcpy(iob->data, IDX_ACTIVATE_READ, IDX_ACTIVATE_SIZE); - memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), - &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); - } - memcpy(QETH_IDX_ACT_ISSUER_RM_TOKEN(iob->data), - &card->token.issuer_rm_w,QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data), - &card->info.func_level,sizeof(__u16)); - temp = raw_devno_from_bus_id(CARD_DDEV_ID(card)); - memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2); - temp = (card->info.cula << 8) + card->info.unit_addr2; - memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2); - - wait_event(card->wait_q, - atomic_cmpxchg(&channel->irq_pending, 0, 1) == 0); - QETH_DBF_TEXT(setup, 6, "noirqpnd"); - spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); - rc = ccw_device_start(channel->ccwdev, - &channel->ccw,(addr_t) iob, 0, 0); - spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); - - if (rc) { - PRINT_ERR("qeth: Error1 in activating channel. rc=%d\n",rc); - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - atomic_set(&channel->irq_pending, 0); - wake_up(&card->wait_q); - return rc; - } - rc = wait_event_interruptible_timeout(card->wait_q, - channel->state == CH_STATE_ACTIVATING, QETH_TIMEOUT); - if (rc == -ERESTARTSYS) - return rc; - if (channel->state != CH_STATE_ACTIVATING) { - PRINT_WARN("qeth: IDX activate timed out!\n"); - QETH_DBF_TEXT_(setup, 2, "2err%d", -ETIME); - qeth_clear_cmd_buffers(channel); - return -ETIME; - } - return qeth_idx_activate_get_answer(channel,idx_reply_cb); -} - -static int -qeth_peer_func_level(int level) -{ - if ((level & 0xff) == 8) - return (level & 0xff) + 0x400; - if (((level >> 8) & 3) == 1) - return (level & 0xff) + 0x200; - return level; -} - -static void -qeth_idx_write_cb(struct qeth_channel *channel, struct qeth_cmd_buffer *iob) -{ - struct qeth_card *card; - __u16 temp; - - QETH_DBF_TEXT(setup ,2, "idxwrcb"); - - if (channel->state == CH_STATE_DOWN) { - channel->state = CH_STATE_ACTIVATING; - goto out; - } - card = CARD_FROM_CDEV(channel->ccwdev); - - if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) { - if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19) - PRINT_ERR("IDX_ACTIVATE on write channel device %s: " - "adapter exclusively used by another host\n", - CARD_WDEV_ID(card)); - else - PRINT_ERR("IDX_ACTIVATE on write channel device %s: " - "negative reply\n", CARD_WDEV_ID(card)); - goto out; - } - memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); - if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) { - PRINT_WARN("IDX_ACTIVATE on write channel device %s: " - "function level mismatch " - "(sent: 0x%x, received: 0x%x)\n", - CARD_WDEV_ID(card), card->info.func_level, temp); - goto out; - } - channel->state = CH_STATE_UP; -out: - qeth_release_buffer(channel, iob); -} - -static int -qeth_check_idx_response(unsigned char *buffer) -{ - if (!buffer) - return 0; - - QETH_DBF_HEX(control, 2, buffer, QETH_DBF_CONTROL_LEN); - if ((buffer[2] & 0xc0) == 0xc0) { - PRINT_WARN("received an IDX TERMINATE " - "with cause code 0x%02x%s\n", - buffer[4], - ((buffer[4] == 0x22) ? - " -- try another portname" : "")); - QETH_DBF_TEXT(trace, 2, "ckidxres"); - QETH_DBF_TEXT(trace, 2, " idxterm"); - QETH_DBF_TEXT_(trace, 2, " rc%d", -EIO); - return -EIO; - } - return 0; -} - -static void -qeth_idx_read_cb(struct qeth_channel *channel, struct qeth_cmd_buffer *iob) -{ - struct qeth_card *card; - __u16 temp; - - QETH_DBF_TEXT(setup , 2, "idxrdcb"); - if (channel->state == CH_STATE_DOWN) { - channel->state = CH_STATE_ACTIVATING; - goto out; - } - - card = CARD_FROM_CDEV(channel->ccwdev); - if (qeth_check_idx_response(iob->data)) { - goto out; - } - if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) { - if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19) - PRINT_ERR("IDX_ACTIVATE on read channel device %s: " - "adapter exclusively used by another host\n", - CARD_RDEV_ID(card)); - else - PRINT_ERR("IDX_ACTIVATE on read channel device %s: " - "negative reply\n", CARD_RDEV_ID(card)); - goto out; - } - -/** - * temporary fix for microcode bug - * to revert it,replace OR by AND - */ - if ( (!QETH_IDX_NO_PORTNAME_REQUIRED(iob->data)) || - (card->info.type == QETH_CARD_TYPE_OSAE) ) - card->info.portname_required = 1; - - memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); - if (temp != qeth_peer_func_level(card->info.func_level)) { - PRINT_WARN("IDX_ACTIVATE on read channel device %s: function " - "level mismatch (sent: 0x%x, received: 0x%x)\n", - CARD_RDEV_ID(card), card->info.func_level, temp); - goto out; - } - memcpy(&card->token.issuer_rm_r, - QETH_IDX_ACT_ISSUER_RM_TOKEN(iob->data), - QETH_MPC_TOKEN_LENGTH); - memcpy(&card->info.mcl_level[0], - QETH_IDX_REPLY_LEVEL(iob->data), QETH_MCL_LENGTH); - channel->state = CH_STATE_UP; -out: - qeth_release_buffer(channel,iob); -} - -static int -qeth_issue_next_read(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace,5,"issnxrd"); - if (card->read.state != CH_STATE_UP) - return -EIO; - iob = qeth_get_buffer(&card->read); - if (!iob) { - PRINT_WARN("issue_next_read failed: no iob available!\n"); - return -ENOMEM; - } - qeth_setup_ccw(&card->read, iob->data, QETH_BUFSIZE); - QETH_DBF_TEXT(trace, 6, "noirqpnd"); - rc = ccw_device_start(card->read.ccwdev, &card->read.ccw, - (addr_t) iob, 0, 0); - if (rc) { - PRINT_ERR("Error in starting next read ccw! rc=%i\n", rc); - atomic_set(&card->read.irq_pending, 0); - qeth_schedule_recovery(card); - wake_up(&card->wait_q); - } - return rc; -} - -static struct qeth_reply * -qeth_alloc_reply(struct qeth_card *card) -{ - struct qeth_reply *reply; - - reply = kzalloc(sizeof(struct qeth_reply), GFP_ATOMIC); - if (reply){ - atomic_set(&reply->refcnt, 1); - atomic_set(&reply->received, 0); - reply->card = card; - }; - return reply; -} - -static void -qeth_get_reply(struct qeth_reply *reply) -{ - WARN_ON(atomic_read(&reply->refcnt) <= 0); - atomic_inc(&reply->refcnt); -} - -static void -qeth_put_reply(struct qeth_reply *reply) -{ - WARN_ON(atomic_read(&reply->refcnt) <= 0); - if (atomic_dec_and_test(&reply->refcnt)) - kfree(reply); -} - -static void -qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, struct qeth_card *card) -{ - int rc; - int com; - char * ipa_name; - - com = cmd->hdr.command; - rc = cmd->hdr.return_code; - ipa_name = qeth_get_ipa_cmd_name(com); - - PRINT_ERR("%s(x%X) for %s returned x%X \"%s\"\n", ipa_name, com, - QETH_CARD_IFNAME(card), rc, qeth_get_ipa_msg(rc)); -} - -static struct qeth_ipa_cmd * -qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) -{ - struct qeth_ipa_cmd *cmd = NULL; - - QETH_DBF_TEXT(trace,5,"chkipad"); - if (IS_IPA(iob->data)){ - cmd = (struct qeth_ipa_cmd *) PDU_ENCAPSULATION(iob->data); - if (IS_IPA_REPLY(cmd)) { - if (cmd->hdr.return_code) - qeth_issue_ipa_msg(cmd, card); - return cmd; - } - else { - switch (cmd->hdr.command) { - case IPA_CMD_STOPLAN: - PRINT_WARN("Link failure on %s (CHPID 0x%X) - " - "there is a network problem or " - "someone pulled the cable or " - "disabled the port.\n", - QETH_CARD_IFNAME(card), - card->info.chpid); - card->lan_online = 0; - if (card->dev && netif_carrier_ok(card->dev)) - netif_carrier_off(card->dev); - return NULL; - case IPA_CMD_STARTLAN: - PRINT_INFO("Link reestablished on %s " - "(CHPID 0x%X). Scheduling " - "IP address reset.\n", - QETH_CARD_IFNAME(card), - card->info.chpid); - netif_carrier_on(card->dev); - qeth_schedule_recovery(card); - return NULL; - case IPA_CMD_MODCCID: - return cmd; - case IPA_CMD_REGISTER_LOCAL_ADDR: - QETH_DBF_TEXT(trace,3, "irla"); - break; - case IPA_CMD_UNREGISTER_LOCAL_ADDR: - QETH_DBF_TEXT(trace,3, "urla"); - break; - default: - PRINT_WARN("Received data is IPA " - "but not a reply!\n"); - break; - } - } - } - return cmd; -} - -/** - * wake all waiting ipa commands - */ -static void -qeth_clear_ipacmd_list(struct qeth_card *card) -{ - struct qeth_reply *reply, *r; - unsigned long flags; - - QETH_DBF_TEXT(trace, 4, "clipalst"); - - spin_lock_irqsave(&card->lock, flags); - list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { - qeth_get_reply(reply); - reply->rc = -EIO; - atomic_inc(&reply->received); - list_del_init(&reply->list); - wake_up(&reply->wait_q); - qeth_put_reply(reply); - } - spin_unlock_irqrestore(&card->lock, flags); -} - -static void -qeth_send_control_data_cb(struct qeth_channel *channel, - struct qeth_cmd_buffer *iob) -{ - struct qeth_card *card; - struct qeth_reply *reply, *r; - struct qeth_ipa_cmd *cmd; - unsigned long flags; - int keep_reply; - - QETH_DBF_TEXT(trace,4,"sndctlcb"); - - card = CARD_FROM_CDEV(channel->ccwdev); - if (qeth_check_idx_response(iob->data)) { - qeth_clear_ipacmd_list(card); - qeth_schedule_recovery(card); - goto out; - } - - cmd = qeth_check_ipa_data(card, iob); - if ((cmd == NULL) && (card->state != CARD_STATE_DOWN)) - goto out; - /*in case of OSN : check if cmd is set */ - if (card->info.type == QETH_CARD_TYPE_OSN && - cmd && - cmd->hdr.command != IPA_CMD_STARTLAN && - card->osn_info.assist_cb != NULL) { - card->osn_info.assist_cb(card->dev, cmd); - goto out; - } - - spin_lock_irqsave(&card->lock, flags); - list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { - if ((reply->seqno == QETH_IDX_COMMAND_SEQNO) || - ((cmd) && (reply->seqno == cmd->hdr.seqno))) { - qeth_get_reply(reply); - list_del_init(&reply->list); - spin_unlock_irqrestore(&card->lock, flags); - keep_reply = 0; - if (reply->callback != NULL) { - if (cmd) { - reply->offset = (__u16)((char*)cmd - - (char *)iob->data); - keep_reply = reply->callback(card, - reply, - (unsigned long)cmd); - } else - keep_reply = reply->callback(card, - reply, - (unsigned long)iob); - } - if (cmd) - reply->rc = (u16) cmd->hdr.return_code; - else if (iob->rc) - reply->rc = iob->rc; - if (keep_reply) { - spin_lock_irqsave(&card->lock, flags); - list_add_tail(&reply->list, - &card->cmd_waiter_list); - spin_unlock_irqrestore(&card->lock, flags); - } else { - atomic_inc(&reply->received); - wake_up(&reply->wait_q); - } - qeth_put_reply(reply); - goto out; - } - } - spin_unlock_irqrestore(&card->lock, flags); -out: - memcpy(&card->seqno.pdu_hdr_ack, - QETH_PDU_HEADER_SEQ_NO(iob->data), - QETH_SEQ_NO_LENGTH); - qeth_release_buffer(channel,iob); -} - -static void -qeth_prepare_control_data(struct qeth_card *card, int len, - struct qeth_cmd_buffer *iob) -{ - qeth_setup_ccw(&card->write,iob->data,len); - iob->callback = qeth_release_buffer; - - memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), - &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.trans_hdr++; - memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), - &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.pdu_hdr++; - memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), - &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); - QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); -} - -static int -qeth_send_control_data(struct qeth_card *card, int len, - struct qeth_cmd_buffer *iob, - int (*reply_cb) - (struct qeth_card *, struct qeth_reply*, unsigned long), - void *reply_param) - -{ - int rc; - unsigned long flags; - struct qeth_reply *reply = NULL; - unsigned long timeout; - - QETH_DBF_TEXT(trace, 2, "sendctl"); - - reply = qeth_alloc_reply(card); - if (!reply) { - PRINT_WARN("Could no alloc qeth_reply!\n"); - return -ENOMEM; - } - reply->callback = reply_cb; - reply->param = reply_param; - if (card->state == CARD_STATE_DOWN) - reply->seqno = QETH_IDX_COMMAND_SEQNO; - else - reply->seqno = card->seqno.ipa++; - init_waitqueue_head(&reply->wait_q); - spin_lock_irqsave(&card->lock, flags); - list_add_tail(&reply->list, &card->cmd_waiter_list); - spin_unlock_irqrestore(&card->lock, flags); - QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); - - while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ; - qeth_prepare_control_data(card, len, iob); - - if (IS_IPA(iob->data)) - timeout = jiffies + QETH_IPA_TIMEOUT; - else - timeout = jiffies + QETH_TIMEOUT; - - QETH_DBF_TEXT(trace, 6, "noirqpnd"); - spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); - rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, - (addr_t) iob, 0, 0); - spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); - if (rc){ - PRINT_WARN("qeth_send_control_data: " - "ccw_device_start rc = %i\n", rc); - QETH_DBF_TEXT_(trace, 2, " err%d", rc); - spin_lock_irqsave(&card->lock, flags); - list_del_init(&reply->list); - qeth_put_reply(reply); - spin_unlock_irqrestore(&card->lock, flags); - qeth_release_buffer(iob->channel, iob); - atomic_set(&card->write.irq_pending, 0); - wake_up(&card->wait_q); - return rc; - } - while (!atomic_read(&reply->received)) { - if (time_after(jiffies, timeout)) { - spin_lock_irqsave(&reply->card->lock, flags); - list_del_init(&reply->list); - spin_unlock_irqrestore(&reply->card->lock, flags); - reply->rc = -ETIME; - atomic_inc(&reply->received); - wake_up(&reply->wait_q); - } - cpu_relax(); - }; - rc = reply->rc; - qeth_put_reply(reply); - return rc; -} - -static int -qeth_osn_send_control_data(struct qeth_card *card, int len, - struct qeth_cmd_buffer *iob) -{ - unsigned long flags; - int rc = 0; - - QETH_DBF_TEXT(trace, 5, "osndctrd"); - - wait_event(card->wait_q, - atomic_cmpxchg(&card->write.irq_pending, 0, 1) == 0); - qeth_prepare_control_data(card, len, iob); - QETH_DBF_TEXT(trace, 6, "osnoirqp"); - spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); - rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, - (addr_t) iob, 0, 0); - spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); - if (rc){ - PRINT_WARN("qeth_osn_send_control_data: " - "ccw_device_start rc = %i\n", rc); - QETH_DBF_TEXT_(trace, 2, " err%d", rc); - qeth_release_buffer(iob->channel, iob); - atomic_set(&card->write.irq_pending, 0); - wake_up(&card->wait_q); - } - return rc; -} - -static inline void -qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, - char prot_type) -{ - memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); - memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1); - memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); -} - -static int -qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, - int data_len) -{ - u16 s1, s2; - - QETH_DBF_TEXT(trace,4,"osndipa"); - - qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2); - s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len); - s2 = (u16)data_len; - memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); - memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); - memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); - memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); - return qeth_osn_send_control_data(card, s1, iob); -} - -static int -qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, - int (*reply_cb) - (struct qeth_card *,struct qeth_reply*, unsigned long), - void *reply_param) -{ - int rc; - char prot_type; - - QETH_DBF_TEXT(trace,4,"sendipa"); - - if (card->options.layer2) - if (card->info.type == QETH_CARD_TYPE_OSN) - prot_type = QETH_PROT_OSN2; - else - prot_type = QETH_PROT_LAYER2; - else - prot_type = QETH_PROT_TCPIP; - qeth_prepare_ipa_cmd(card,iob,prot_type); - rc = qeth_send_control_data(card, IPA_CMD_LENGTH, iob, - reply_cb, reply_param); - return rc; -} - - -static int -qeth_cm_enable_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup, 2, "cmenblcb"); - - iob = (struct qeth_cmd_buffer *) data; - memcpy(&card->token.cm_filter_r, - QETH_CM_ENABLE_RESP_FILTER_TOKEN(iob->data), - QETH_MPC_TOKEN_LENGTH); - QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); - return 0; -} - -static int -qeth_cm_enable(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup,2,"cmenable"); - - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data, CM_ENABLE, CM_ENABLE_SIZE); - memcpy(QETH_CM_ENABLE_ISSUER_RM_TOKEN(iob->data), - &card->token.issuer_rm_r, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_CM_ENABLE_FILTER_TOKEN(iob->data), - &card->token.cm_filter_w, QETH_MPC_TOKEN_LENGTH); - - rc = qeth_send_control_data(card, CM_ENABLE_SIZE, iob, - qeth_cm_enable_cb, NULL); - return rc; -} - -static int -qeth_cm_setup_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup, 2, "cmsetpcb"); - - iob = (struct qeth_cmd_buffer *) data; - memcpy(&card->token.cm_connection_r, - QETH_CM_SETUP_RESP_DEST_ADDR(iob->data), - QETH_MPC_TOKEN_LENGTH); - QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); - return 0; -} - -static int -qeth_cm_setup(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup,2,"cmsetup"); - - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data, CM_SETUP, CM_SETUP_SIZE); - memcpy(QETH_CM_SETUP_DEST_ADDR(iob->data), - &card->token.issuer_rm_r, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_CM_SETUP_CONNECTION_TOKEN(iob->data), - &card->token.cm_connection_w, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_CM_SETUP_FILTER_TOKEN(iob->data), - &card->token.cm_filter_r, QETH_MPC_TOKEN_LENGTH); - rc = qeth_send_control_data(card, CM_SETUP_SIZE, iob, - qeth_cm_setup_cb, NULL); - return rc; - -} - -static int -qeth_ulp_enable_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - - __u16 mtu, framesize; - __u16 len; - __u8 link_type; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup, 2, "ulpenacb"); - - iob = (struct qeth_cmd_buffer *) data; - memcpy(&card->token.ulp_filter_r, - QETH_ULP_ENABLE_RESP_FILTER_TOKEN(iob->data), - QETH_MPC_TOKEN_LENGTH); - if (qeth_get_mtu_out_of_mpc(card->info.type)) { - memcpy(&framesize, QETH_ULP_ENABLE_RESP_MAX_MTU(iob->data), 2); - mtu = qeth_get_mtu_outof_framesize(framesize); - if (!mtu) { - iob->rc = -EINVAL; - QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); - return 0; - } - card->info.max_mtu = mtu; - card->info.initial_mtu = mtu; - card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE; - } else { - card->info.initial_mtu = qeth_get_initial_mtu_for_card(card); - card->info.max_mtu = qeth_get_max_mtu_for_card(card->info.type); - card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT; - } - - memcpy(&len, QETH_ULP_ENABLE_RESP_DIFINFO_LEN(iob->data), 2); - if (len >= QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE) { - memcpy(&link_type, - QETH_ULP_ENABLE_RESP_LINK_TYPE(iob->data), 1); - card->info.link_type = link_type; - } else - card->info.link_type = 0; - QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); - return 0; -} - -static int -qeth_ulp_enable(struct qeth_card *card) -{ - int rc; - char prot_type; - struct qeth_cmd_buffer *iob; - - /*FIXME: trace view callbacks*/ - QETH_DBF_TEXT(setup,2,"ulpenabl"); - - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data, ULP_ENABLE, ULP_ENABLE_SIZE); - - *(QETH_ULP_ENABLE_LINKNUM(iob->data)) = - (__u8) card->info.portno; - if (card->options.layer2) - if (card->info.type == QETH_CARD_TYPE_OSN) - prot_type = QETH_PROT_OSN2; - else - prot_type = QETH_PROT_LAYER2; - else - prot_type = QETH_PROT_TCPIP; - - memcpy(QETH_ULP_ENABLE_PROT_TYPE(iob->data),&prot_type,1); - memcpy(QETH_ULP_ENABLE_DEST_ADDR(iob->data), - &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_ULP_ENABLE_FILTER_TOKEN(iob->data), - &card->token.ulp_filter_w, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_ULP_ENABLE_PORTNAME_AND_LL(iob->data), - card->info.portname, 9); - rc = qeth_send_control_data(card, ULP_ENABLE_SIZE, iob, - qeth_ulp_enable_cb, NULL); - return rc; - -} - -static int -qeth_ulp_setup_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup, 2, "ulpstpcb"); - - iob = (struct qeth_cmd_buffer *) data; - memcpy(&card->token.ulp_connection_r, - QETH_ULP_SETUP_RESP_CONNECTION_TOKEN(iob->data), - QETH_MPC_TOKEN_LENGTH); - QETH_DBF_TEXT_(setup, 2, " rc%d", iob->rc); - return 0; -} - -static int -qeth_ulp_setup(struct qeth_card *card) -{ - int rc; - __u16 temp; - struct qeth_cmd_buffer *iob; - struct ccw_dev_id dev_id; - - QETH_DBF_TEXT(setup,2,"ulpsetup"); - - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data, ULP_SETUP, ULP_SETUP_SIZE); - - memcpy(QETH_ULP_SETUP_DEST_ADDR(iob->data), - &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_ULP_SETUP_CONNECTION_TOKEN(iob->data), - &card->token.ulp_connection_w, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_ULP_SETUP_FILTER_TOKEN(iob->data), - &card->token.ulp_filter_r, QETH_MPC_TOKEN_LENGTH); - - ccw_device_get_id(CARD_DDEV(card), &dev_id); - memcpy(QETH_ULP_SETUP_CUA(iob->data), &dev_id.devno, 2); - temp = (card->info.cula << 8) + card->info.unit_addr2; - memcpy(QETH_ULP_SETUP_REAL_DEVADDR(iob->data), &temp, 2); - rc = qeth_send_control_data(card, ULP_SETUP_SIZE, iob, - qeth_ulp_setup_cb, NULL); - return rc; -} - -static inline int -qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error, - unsigned int siga_error, const char *dbftext) -{ - if (qdio_error || siga_error) { - QETH_DBF_TEXT(trace, 2, dbftext); - QETH_DBF_TEXT(qerr, 2, dbftext); - QETH_DBF_TEXT_(qerr, 2, " F15=%02X", - buf->element[15].flags & 0xff); - QETH_DBF_TEXT_(qerr, 2, " F14=%02X", - buf->element[14].flags & 0xff); - QETH_DBF_TEXT_(qerr, 2, " qerr=%X", qdio_error); - QETH_DBF_TEXT_(qerr, 2, " serr=%X", siga_error); - return 1; - } - return 0; -} - -static struct sk_buff * -qeth_get_skb(unsigned int length, struct qeth_hdr *hdr) -{ - struct sk_buff* skb; - int add_len; - - add_len = 0; - if (hdr->hdr.osn.id == QETH_HEADER_TYPE_OSN) - add_len = sizeof(struct qeth_hdr); -#ifdef CONFIG_QETH_VLAN - else - add_len = VLAN_HLEN; -#endif - skb = dev_alloc_skb(length + add_len); - if (skb && add_len) - skb_reserve(skb, add_len); - return skb; -} - -static inline int -qeth_create_skb_frag(struct qdio_buffer_element *element, - struct sk_buff **pskb, - int offset, int *pfrag, int data_len) -{ - struct page *page = virt_to_page(element->addr); - if (*pfrag == 0) { - /* the upper protocol layers assume that there is data in the - * skb itself. Copy a small amount (64 bytes) to make them - * happy. */ - *pskb = dev_alloc_skb(64 + QETH_FAKE_LL_LEN_ETH); - if (!(*pskb)) - return -ENOMEM; - skb_reserve(*pskb, QETH_FAKE_LL_LEN_ETH); - if (data_len <= 64) { - memcpy(skb_put(*pskb, data_len), element->addr + offset, - data_len); - } else { - get_page(page); - memcpy(skb_put(*pskb, 64), element->addr + offset, 64); - skb_fill_page_desc(*pskb, *pfrag, page, offset + 64, - data_len - 64); - (*pskb)->data_len += data_len - 64; - (*pskb)->len += data_len - 64; - (*pskb)->truesize += data_len - 64; - } - } else { - get_page(page); - skb_fill_page_desc(*pskb, *pfrag, page, offset, data_len); - (*pskb)->data_len += data_len; - (*pskb)->len += data_len; - (*pskb)->truesize += data_len; - } - (*pfrag)++; - return 0; -} - -static inline struct qeth_buffer_pool_entry * -qeth_find_free_buffer_pool_entry(struct qeth_card *card) -{ - struct list_head *plh; - struct qeth_buffer_pool_entry *entry; - int i, free; - struct page *page; - - if (list_empty(&card->qdio.in_buf_pool.entry_list)) - return NULL; - - list_for_each(plh, &card->qdio.in_buf_pool.entry_list) { - entry = list_entry(plh, struct qeth_buffer_pool_entry, list); - free = 1; - for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) { - if (page_count(virt_to_page(entry->elements[i])) > 1) { - free = 0; - break; - } - } - if (free) { - list_del_init(&entry->list); - return entry; - } - } - - /* no free buffer in pool so take first one and swap pages */ - entry = list_entry(card->qdio.in_buf_pool.entry_list.next, - struct qeth_buffer_pool_entry, list); - for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) { - if (page_count(virt_to_page(entry->elements[i])) > 1) { - page = alloc_page(GFP_ATOMIC|GFP_DMA); - if (!page) { - return NULL; - } else { - free_page((unsigned long)entry->elements[i]); - entry->elements[i] = page_address(page); - if (card->options.performance_stats) - card->perf_stats.sg_alloc_page_rx++; - } - } - } - list_del_init(&entry->list); - return entry; -} - -static struct sk_buff * -qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, - struct qdio_buffer_element **__element, int *__offset, - struct qeth_hdr **hdr) -{ - struct qdio_buffer_element *element = *__element; - int offset = *__offset; - struct sk_buff *skb = NULL; - int skb_len; - void *data_ptr; - int data_len; - int use_rx_sg = 0; - int frag = 0; - - QETH_DBF_TEXT(trace,6,"nextskb"); - /* qeth_hdr must not cross element boundaries */ - if (element->length < offset + sizeof(struct qeth_hdr)){ - if (qeth_is_last_sbale(element)) - return NULL; - element++; - offset = 0; - if (element->length < sizeof(struct qeth_hdr)) - return NULL; - } - *hdr = element->addr + offset; - - offset += sizeof(struct qeth_hdr); - if (card->options.layer2) - if (card->info.type == QETH_CARD_TYPE_OSN) - skb_len = (*hdr)->hdr.osn.pdu_length; - else - skb_len = (*hdr)->hdr.l2.pkt_length; - else - skb_len = (*hdr)->hdr.l3.length; - - if (!skb_len) - return NULL; - if ((skb_len >= card->options.rx_sg_cb) && - (!(card->info.type == QETH_CARD_TYPE_OSN)) && - (!atomic_read(&card->force_alloc_skb))) { - use_rx_sg = 1; - } else { - if (card->options.fake_ll) { - if (card->dev->type == ARPHRD_IEEE802_TR) { - if (!(skb = qeth_get_skb(skb_len + - QETH_FAKE_LL_LEN_TR, *hdr))) - goto no_mem; - skb_reserve(skb, QETH_FAKE_LL_LEN_TR); - } else { - if (!(skb = qeth_get_skb(skb_len + - QETH_FAKE_LL_LEN_ETH, *hdr))) - goto no_mem; - skb_reserve(skb, QETH_FAKE_LL_LEN_ETH); - } - } else { - skb = qeth_get_skb(skb_len, *hdr); - if (!skb) - goto no_mem; - } - } - - data_ptr = element->addr + offset; - while (skb_len) { - data_len = min(skb_len, (int)(element->length - offset)); - if (data_len) { - if (use_rx_sg) { - if (qeth_create_skb_frag(element, &skb, offset, - &frag, data_len)) - goto no_mem; - } else { - memcpy(skb_put(skb, data_len), data_ptr, - data_len); - } - } - skb_len -= data_len; - if (skb_len){ - if (qeth_is_last_sbale(element)){ - QETH_DBF_TEXT(trace,4,"unexeob"); - QETH_DBF_TEXT_(trace,4,"%s",CARD_BUS_ID(card)); - QETH_DBF_TEXT(qerr,2,"unexeob"); - QETH_DBF_TEXT_(qerr,2,"%s",CARD_BUS_ID(card)); - QETH_DBF_HEX(misc,4,buffer,sizeof(*buffer)); - dev_kfree_skb_any(skb); - card->stats.rx_errors++; - return NULL; - } - element++; - offset = 0; - data_ptr = element->addr; - } else { - offset += data_len; - } - } - *__element = element; - *__offset = offset; - if (use_rx_sg && card->options.performance_stats) { - card->perf_stats.sg_skbs_rx++; - card->perf_stats.sg_frags_rx += skb_shinfo(skb)->nr_frags; - } - return skb; -no_mem: - if (net_ratelimit()){ - PRINT_WARN("No memory for packet received on %s.\n", - QETH_CARD_IFNAME(card)); - QETH_DBF_TEXT(trace,2,"noskbmem"); - QETH_DBF_TEXT_(trace,2,"%s",CARD_BUS_ID(card)); - } - card->stats.rx_dropped++; - return NULL; -} - -static __be16 -qeth_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - struct qeth_card *card; - struct ethhdr *eth; - - QETH_DBF_TEXT(trace,6,"typtrans"); - - card = (struct qeth_card *)dev->priv; -#ifdef CONFIG_TR - if ((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR)) - return tr_type_trans(skb,dev); -#endif /* CONFIG_TR */ - skb_reset_mac_header(skb); - skb_pull(skb, ETH_HLEN ); - eth = eth_hdr(skb); - - if (*eth->h_dest & 1) { - if (memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; - } else if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN)) - skb->pkt_type = PACKET_OTHERHOST; - - if (ntohs(eth->h_proto) >= 1536) - return eth->h_proto; - if (*(unsigned short *) (skb->data) == 0xFFFF) - return htons(ETH_P_802_3); - return htons(ETH_P_802_2); -} - -static void -qeth_rebuild_skb_fake_ll_tr(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *hdr) -{ - struct trh_hdr *fake_hdr; - struct trllc *fake_llc; - struct iphdr *ip_hdr; - - QETH_DBF_TEXT(trace,5,"skbfktr"); - skb_set_mac_header(skb, (int)-QETH_FAKE_LL_LEN_TR); - /* this is a fake ethernet header */ - fake_hdr = tr_hdr(skb); - - /* the destination MAC address */ - switch (skb->pkt_type){ - case PACKET_MULTICAST: - switch (skb->protocol){ -#ifdef CONFIG_QETH_IPV6 - case __constant_htons(ETH_P_IPV6): - ndisc_mc_map((struct in6_addr *) - skb->data + QETH_FAKE_LL_V6_ADDR_POS, - fake_hdr->daddr, card->dev, 0); - break; -#endif /* CONFIG_QETH_IPV6 */ - case __constant_htons(ETH_P_IP): - ip_hdr = (struct iphdr *)skb->data; - ip_tr_mc_map(ip_hdr->daddr, fake_hdr->daddr); - break; - default: - memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN); - } - break; - case PACKET_BROADCAST: - memset(fake_hdr->daddr, 0xff, TR_ALEN); - break; - default: - memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN); - } - /* the source MAC address */ - if (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_SRC_MAC_ADDR) - memcpy(fake_hdr->saddr, &hdr->hdr.l3.dest_addr[2], TR_ALEN); - else - memset(fake_hdr->saddr, 0, TR_ALEN); - fake_hdr->rcf=0; - fake_llc = (struct trllc*)&(fake_hdr->rcf); - fake_llc->dsap = EXTENDED_SAP; - fake_llc->ssap = EXTENDED_SAP; - fake_llc->llc = UI_CMD; - fake_llc->protid[0] = 0; - fake_llc->protid[1] = 0; - fake_llc->protid[2] = 0; - fake_llc->ethertype = ETH_P_IP; -} - -static void -qeth_rebuild_skb_fake_ll_eth(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *hdr) -{ - struct ethhdr *fake_hdr; - struct iphdr *ip_hdr; - - QETH_DBF_TEXT(trace,5,"skbfketh"); - skb_set_mac_header(skb, -QETH_FAKE_LL_LEN_ETH); - /* this is a fake ethernet header */ - fake_hdr = eth_hdr(skb); - - /* the destination MAC address */ - switch (skb->pkt_type){ - case PACKET_MULTICAST: - switch (skb->protocol){ -#ifdef CONFIG_QETH_IPV6 - case __constant_htons(ETH_P_IPV6): - ndisc_mc_map((struct in6_addr *) - skb->data + QETH_FAKE_LL_V6_ADDR_POS, - fake_hdr->h_dest, card->dev, 0); - break; -#endif /* CONFIG_QETH_IPV6 */ - case __constant_htons(ETH_P_IP): - ip_hdr = (struct iphdr *)skb->data; - ip_eth_mc_map(ip_hdr->daddr, fake_hdr->h_dest); - break; - default: - memcpy(fake_hdr->h_dest, card->dev->dev_addr, ETH_ALEN); - } - break; - case PACKET_BROADCAST: - memset(fake_hdr->h_dest, 0xff, ETH_ALEN); - break; - default: - memcpy(fake_hdr->h_dest, card->dev->dev_addr, ETH_ALEN); - } - /* the source MAC address */ - if (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_SRC_MAC_ADDR) - memcpy(fake_hdr->h_source, &hdr->hdr.l3.dest_addr[2], ETH_ALEN); - else - memset(fake_hdr->h_source, 0, ETH_ALEN); - /* the protocol */ - fake_hdr->h_proto = skb->protocol; -} - -static inline void -qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *hdr) -{ - if (card->dev->type == ARPHRD_IEEE802_TR) - qeth_rebuild_skb_fake_ll_tr(card, skb, hdr); - else - qeth_rebuild_skb_fake_ll_eth(card, skb, hdr); -} - -static inline void -qeth_layer2_rebuild_skb(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *hdr) -{ - skb->pkt_type = PACKET_HOST; - skb->protocol = qeth_type_trans(skb, skb->dev); - if (card->options.checksum_type == NO_CHECKSUMMING) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb->ip_summed = CHECKSUM_NONE; - *((__u32 *)skb->cb) = ++card->seqno.pkt_seqno; -} - -static __u16 -qeth_rebuild_skb(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *hdr) -{ - unsigned short vlan_id = 0; -#ifdef CONFIG_QETH_IPV6 - if (hdr->hdr.l3.flags & QETH_HDR_PASSTHRU) { - skb->pkt_type = PACKET_HOST; - skb->protocol = qeth_type_trans(skb, card->dev); - return 0; - } -#endif /* CONFIG_QETH_IPV6 */ - skb->protocol = htons((hdr->hdr.l3.flags & QETH_HDR_IPV6)? ETH_P_IPV6 : - ETH_P_IP); - switch (hdr->hdr.l3.flags & QETH_HDR_CAST_MASK){ - case QETH_CAST_UNICAST: - skb->pkt_type = PACKET_HOST; - break; - case QETH_CAST_MULTICAST: - skb->pkt_type = PACKET_MULTICAST; - card->stats.multicast++; - break; - case QETH_CAST_BROADCAST: - skb->pkt_type = PACKET_BROADCAST; - card->stats.multicast++; - break; - case QETH_CAST_ANYCAST: - case QETH_CAST_NOCAST: - default: - skb->pkt_type = PACKET_HOST; - } - - if (hdr->hdr.l3.ext_flags & - (QETH_HDR_EXT_VLAN_FRAME | QETH_HDR_EXT_INCLUDE_VLAN_TAG)) { - vlan_id = (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_VLAN_FRAME)? - hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]); - } - - if (card->options.fake_ll) - qeth_rebuild_skb_fake_ll(card, skb, hdr); - else - skb_reset_mac_header(skb); - skb->ip_summed = card->options.checksum_type; - if (card->options.checksum_type == HW_CHECKSUMMING){ - if ( (hdr->hdr.l3.ext_flags & - (QETH_HDR_EXT_CSUM_HDR_REQ | - QETH_HDR_EXT_CSUM_TRANSP_REQ)) == - (QETH_HDR_EXT_CSUM_HDR_REQ | - QETH_HDR_EXT_CSUM_TRANSP_REQ) ) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb->ip_summed = SW_CHECKSUMMING; - } - return vlan_id; -} - -static void -qeth_process_inbound_buffer(struct qeth_card *card, - struct qeth_qdio_buffer *buf, int index) -{ - struct qdio_buffer_element *element; - struct sk_buff *skb; - struct qeth_hdr *hdr; - int offset; - int rxrc; - __u16 vlan_tag = 0; - - /* get first element of current buffer */ - element = (struct qdio_buffer_element *)&buf->buffer->element[0]; - offset = 0; - if (card->options.performance_stats) - card->perf_stats.bufs_rec++; - while((skb = qeth_get_next_skb(card, buf->buffer, &element, - &offset, &hdr))) { - skb->dev = card->dev; - if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2) - qeth_layer2_rebuild_skb(card, skb, hdr); - else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3) - vlan_tag = qeth_rebuild_skb(card, skb, hdr); - else if (hdr->hdr.osn.id == QETH_HEADER_TYPE_OSN) { - skb_push(skb, sizeof(struct qeth_hdr)); - skb_copy_to_linear_data(skb, hdr, - sizeof(struct qeth_hdr)); - } else { /* unknown header type */ - dev_kfree_skb_any(skb); - QETH_DBF_TEXT(trace, 3, "inbunkno"); - QETH_DBF_HEX(control, 3, hdr, QETH_DBF_CONTROL_LEN); - continue; - } - /* is device UP ? */ - if (!(card->dev->flags & IFF_UP)){ - dev_kfree_skb_any(skb); - continue; - } - if (card->info.type == QETH_CARD_TYPE_OSN) - rxrc = card->osn_info.data_cb(skb); - else -#ifdef CONFIG_QETH_VLAN - if (vlan_tag) - if (card->vlangrp) - vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag); - else { - dev_kfree_skb_any(skb); - continue; - } - else -#endif - rxrc = netif_rx(skb); - card->dev->last_rx = jiffies; - card->stats.rx_packets++; - card->stats.rx_bytes += skb->len; - } -} - -static int -qeth_init_input_buffer(struct qeth_card *card, struct qeth_qdio_buffer *buf) -{ - struct qeth_buffer_pool_entry *pool_entry; - int i; - - pool_entry = qeth_find_free_buffer_pool_entry(card); - if (!pool_entry) - return 1; - /* - * since the buffer is accessed only from the input_tasklet - * there shouldn't be a need to synchronize; also, since we use - * the QETH_IN_BUF_REQUEUE_THRESHOLD we should never run out off - * buffers - */ - BUG_ON(!pool_entry); - - buf->pool_entry = pool_entry; - for(i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i){ - buf->buffer->element[i].length = PAGE_SIZE; - buf->buffer->element[i].addr = pool_entry->elements[i]; - if (i == QETH_MAX_BUFFER_ELEMENTS(card) - 1) - buf->buffer->element[i].flags = SBAL_FLAGS_LAST_ENTRY; - else - buf->buffer->element[i].flags = 0; - } - buf->state = QETH_QDIO_BUF_EMPTY; - return 0; -} - -static void -qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf) -{ - int i; - struct sk_buff *skb; - - /* is PCI flag set on buffer? */ - if (buf->buffer->element[0].flags & 0x40) - atomic_dec(&queue->set_pci_flags_count); - - while ((skb = skb_dequeue(&buf->skb_list))){ - atomic_dec(&skb->users); - dev_kfree_skb_any(skb); - } - qeth_eddp_buf_release_contexts(buf); - for(i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i){ - buf->buffer->element[i].length = 0; - buf->buffer->element[i].addr = NULL; - buf->buffer->element[i].flags = 0; - } - buf->next_element_to_fill = 0; - atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY); -} - -static void -qeth_queue_input_buffer(struct qeth_card *card, int index) -{ - struct qeth_qdio_q *queue = card->qdio.in_q; - int count; - int i; - int rc; - int newcount = 0; - - QETH_DBF_TEXT(trace,6,"queinbuf"); - count = (index < queue->next_buf_to_init)? - card->qdio.in_buf_pool.buf_count - - (queue->next_buf_to_init - index) : - card->qdio.in_buf_pool.buf_count - - (queue->next_buf_to_init + QDIO_MAX_BUFFERS_PER_Q - index); - /* only requeue at a certain threshold to avoid SIGAs */ - if (count >= QETH_IN_BUF_REQUEUE_THRESHOLD(card)){ - for (i = queue->next_buf_to_init; - i < queue->next_buf_to_init + count; ++i) { - if (qeth_init_input_buffer(card, - &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q])) { - break; - } else { - newcount++; - } - } - - if (newcount < count) { - /* we are in memory shortage so we switch back to - traditional skb allocation and drop packages */ - if (!atomic_read(&card->force_alloc_skb) && - net_ratelimit()) - PRINT_WARN("Switch to alloc skb\n"); - atomic_set(&card->force_alloc_skb, 3); - count = newcount; - } else { - if ((atomic_read(&card->force_alloc_skb) == 1) && - net_ratelimit()) - PRINT_WARN("Switch to sg\n"); - atomic_add_unless(&card->force_alloc_skb, -1, 0); - } - - /* - * according to old code it should be avoided to requeue all - * 128 buffers in order to benefit from PCI avoidance. - * this function keeps at least one buffer (the buffer at - * 'index') un-requeued -> this buffer is the first buffer that - * will be requeued the next time - */ - if (card->options.performance_stats) { - card->perf_stats.inbound_do_qdio_cnt++; - card->perf_stats.inbound_do_qdio_start_time = - qeth_get_micros(); - } - rc = do_QDIO(CARD_DDEV(card), - QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT, - 0, queue->next_buf_to_init, count, NULL); - if (card->options.performance_stats) - card->perf_stats.inbound_do_qdio_time += - qeth_get_micros() - - card->perf_stats.inbound_do_qdio_start_time; - if (rc){ - PRINT_WARN("qeth_queue_input_buffer's do_QDIO " - "return %i (device %s).\n", - rc, CARD_DDEV_ID(card)); - QETH_DBF_TEXT(trace,2,"qinberr"); - QETH_DBF_TEXT_(trace,2,"%s",CARD_BUS_ID(card)); - } - queue->next_buf_to_init = (queue->next_buf_to_init + count) % - QDIO_MAX_BUFFERS_PER_Q; - } -} - -static inline void -qeth_put_buffer_pool_entry(struct qeth_card *card, - struct qeth_buffer_pool_entry *entry) -{ - QETH_DBF_TEXT(trace, 6, "ptbfplen"); - list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list); -} - -static void -qeth_qdio_input_handler(struct ccw_device * ccwdev, unsigned int status, - unsigned int qdio_err, unsigned int siga_err, - unsigned int queue, int first_element, int count, - unsigned long card_ptr) -{ - struct net_device *net_dev; - struct qeth_card *card; - struct qeth_qdio_buffer *buffer; - int index; - int i; - - QETH_DBF_TEXT(trace, 6, "qdinput"); - card = (struct qeth_card *) card_ptr; - net_dev = card->dev; - if (card->options.performance_stats) { - card->perf_stats.inbound_cnt++; - card->perf_stats.inbound_start_time = qeth_get_micros(); - } - if (status & QDIO_STATUS_LOOK_FOR_ERROR) { - if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION){ - QETH_DBF_TEXT(trace, 1,"qdinchk"); - QETH_DBF_TEXT_(trace,1,"%s",CARD_BUS_ID(card)); - QETH_DBF_TEXT_(trace,1,"%04X%04X",first_element,count); - QETH_DBF_TEXT_(trace,1,"%04X%04X", queue, status); - qeth_schedule_recovery(card); - return; - } - } - for (i = first_element; i < (first_element + count); ++i) { - index = i % QDIO_MAX_BUFFERS_PER_Q; - buffer = &card->qdio.in_q->bufs[index]; - if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && - qeth_check_qdio_errors(buffer->buffer, - qdio_err, siga_err,"qinerr"))) - qeth_process_inbound_buffer(card, buffer, index); - /* clear buffer and give back to hardware */ - qeth_put_buffer_pool_entry(card, buffer->pool_entry); - qeth_queue_input_buffer(card, index); - } - if (card->options.performance_stats) - card->perf_stats.inbound_time += qeth_get_micros() - - card->perf_stats.inbound_start_time; -} - -static int -qeth_handle_send_error(struct qeth_card *card, - struct qeth_qdio_out_buffer *buffer, - unsigned int qdio_err, unsigned int siga_err) -{ - int sbalf15 = buffer->buffer->element[15].flags & 0xff; - int cc = siga_err & 3; - - QETH_DBF_TEXT(trace, 6, "hdsnderr"); - qeth_check_qdio_errors(buffer->buffer, qdio_err, siga_err, "qouterr"); - switch (cc) { - case 0: - if (qdio_err){ - QETH_DBF_TEXT(trace, 1,"lnkfail"); - QETH_DBF_TEXT_(trace,1,"%s",CARD_BUS_ID(card)); - QETH_DBF_TEXT_(trace,1,"%04x %02x", - (u16)qdio_err, (u8)sbalf15); - return QETH_SEND_ERROR_LINK_FAILURE; - } - return QETH_SEND_ERROR_NONE; - case 2: - if (siga_err & QDIO_SIGA_ERROR_B_BIT_SET) { - QETH_DBF_TEXT(trace, 1, "SIGAcc2B"); - QETH_DBF_TEXT_(trace,1,"%s",CARD_BUS_ID(card)); - return QETH_SEND_ERROR_KICK_IT; - } - if ((sbalf15 >= 15) && (sbalf15 <= 31)) - return QETH_SEND_ERROR_RETRY; - return QETH_SEND_ERROR_LINK_FAILURE; - /* look at qdio_error and sbalf 15 */ - case 1: - QETH_DBF_TEXT(trace, 1, "SIGAcc1"); - QETH_DBF_TEXT_(trace,1,"%s",CARD_BUS_ID(card)); - return QETH_SEND_ERROR_LINK_FAILURE; - case 3: - default: - QETH_DBF_TEXT(trace, 1, "SIGAcc3"); - QETH_DBF_TEXT_(trace,1,"%s",CARD_BUS_ID(card)); - return QETH_SEND_ERROR_KICK_IT; - } -} - -void -qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, - int index, int count) -{ - struct qeth_qdio_out_buffer *buf; - int rc; - int i; - unsigned int qdio_flags; - - QETH_DBF_TEXT(trace, 6, "flushbuf"); - - for (i = index; i < index + count; ++i) { - buf = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; - buf->buffer->element[buf->next_element_to_fill - 1].flags |= - SBAL_FLAGS_LAST_ENTRY; - - if (queue->card->info.type == QETH_CARD_TYPE_IQD) - continue; - - if (!queue->do_pack){ - if ((atomic_read(&queue->used_buffers) >= - (QETH_HIGH_WATERMARK_PACK - - QETH_WATERMARK_PACK_FUZZ)) && - !atomic_read(&queue->set_pci_flags_count)){ - /* it's likely that we'll go to packing - * mode soon */ - atomic_inc(&queue->set_pci_flags_count); - buf->buffer->element[0].flags |= 0x40; - } - } else { - if (!atomic_read(&queue->set_pci_flags_count)){ - /* - * there's no outstanding PCI any more, so we - * have to request a PCI to be sure that the PCI - * will wake at some time in the future then we - * can flush packed buffers that might still be - * hanging around, which can happen if no - * further send was requested by the stack - */ - atomic_inc(&queue->set_pci_flags_count); - buf->buffer->element[0].flags |= 0x40; - } - } - } - - queue->card->dev->trans_start = jiffies; - if (queue->card->options.performance_stats) { - queue->card->perf_stats.outbound_do_qdio_cnt++; - queue->card->perf_stats.outbound_do_qdio_start_time = - qeth_get_micros(); - } - qdio_flags = QDIO_FLAG_SYNC_OUTPUT; - if (under_int) - qdio_flags |= QDIO_FLAG_UNDER_INTERRUPT; - if (atomic_read(&queue->set_pci_flags_count)) - qdio_flags |= QDIO_FLAG_PCI_OUT; - rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, - queue->queue_no, index, count, NULL); - if (queue->card->options.performance_stats) - queue->card->perf_stats.outbound_do_qdio_time += - qeth_get_micros() - - queue->card->perf_stats.outbound_do_qdio_start_time; - if (rc){ - QETH_DBF_TEXT(trace, 2, "flushbuf"); - QETH_DBF_TEXT_(trace, 2, " err%d", rc); - QETH_DBF_TEXT_(trace, 2, "%s", CARD_DDEV_ID(queue->card)); - queue->card->stats.tx_errors += count; - /* this must not happen under normal circumstances. if it - * happens something is really wrong -> recover */ - qeth_schedule_recovery(queue->card); - return; - } - atomic_add(count, &queue->used_buffers); - if (queue->card->options.performance_stats) - queue->card->perf_stats.bufs_sent += count; -} - -/* - * Switched to packing state if the number of used buffers on a queue - * reaches a certain limit. - */ -static void -qeth_switch_to_packing_if_needed(struct qeth_qdio_out_q *queue) -{ - if (!queue->do_pack) { - if (atomic_read(&queue->used_buffers) - >= QETH_HIGH_WATERMARK_PACK){ - /* switch non-PACKING -> PACKING */ - QETH_DBF_TEXT(trace, 6, "np->pack"); - if (queue->card->options.performance_stats) - queue->card->perf_stats.sc_dp_p++; - queue->do_pack = 1; - } - } -} - -/* - * Switches from packing to non-packing mode. If there is a packing - * buffer on the queue this buffer will be prepared to be flushed. - * In that case 1 is returned to inform the caller. If no buffer - * has to be flushed, zero is returned. - */ -static int -qeth_switch_to_nonpacking_if_needed(struct qeth_qdio_out_q *queue) -{ - struct qeth_qdio_out_buffer *buffer; - int flush_count = 0; - - if (queue->do_pack) { - if (atomic_read(&queue->used_buffers) - <= QETH_LOW_WATERMARK_PACK) { - /* switch PACKING -> non-PACKING */ - QETH_DBF_TEXT(trace, 6, "pack->np"); - if (queue->card->options.performance_stats) - queue->card->perf_stats.sc_p_dp++; - queue->do_pack = 0; - /* flush packing buffers */ - buffer = &queue->bufs[queue->next_buf_to_fill]; - if ((atomic_read(&buffer->state) == - QETH_QDIO_BUF_EMPTY) && - (buffer->next_element_to_fill > 0)) { - atomic_set(&buffer->state,QETH_QDIO_BUF_PRIMED); - flush_count++; - queue->next_buf_to_fill = - (queue->next_buf_to_fill + 1) % - QDIO_MAX_BUFFERS_PER_Q; - } - } - } - return flush_count; -} - -/* - * Called to flush a packing buffer if no more pci flags are on the queue. - * Checks if there is a packing buffer and prepares it to be flushed. - * In that case returns 1, otherwise zero. - */ -static int -qeth_flush_buffers_on_no_pci(struct qeth_qdio_out_q *queue) -{ - struct qeth_qdio_out_buffer *buffer; - - buffer = &queue->bufs[queue->next_buf_to_fill]; - if((atomic_read(&buffer->state) == QETH_QDIO_BUF_EMPTY) && - (buffer->next_element_to_fill > 0)){ - /* it's a packing buffer */ - atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED); - queue->next_buf_to_fill = - (queue->next_buf_to_fill + 1) % QDIO_MAX_BUFFERS_PER_Q; - return 1; - } - return 0; -} - -static void -qeth_check_outbound_queue(struct qeth_qdio_out_q *queue) -{ - int index; - int flush_cnt = 0; - int q_was_packing = 0; - - /* - * check if weed have to switch to non-packing mode or if - * we have to get a pci flag out on the queue - */ - if ((atomic_read(&queue->used_buffers) <= QETH_LOW_WATERMARK_PACK) || - !atomic_read(&queue->set_pci_flags_count)){ - if (atomic_xchg(&queue->state, QETH_OUT_Q_LOCKED_FLUSH) == - QETH_OUT_Q_UNLOCKED) { - /* - * If we get in here, there was no action in - * do_send_packet. So, we check if there is a - * packing buffer to be flushed here. - */ - netif_stop_queue(queue->card->dev); - index = queue->next_buf_to_fill; - q_was_packing = queue->do_pack; - flush_cnt += qeth_switch_to_nonpacking_if_needed(queue); - if (!flush_cnt && - !atomic_read(&queue->set_pci_flags_count)) - flush_cnt += - qeth_flush_buffers_on_no_pci(queue); - if (queue->card->options.performance_stats && - q_was_packing) - queue->card->perf_stats.bufs_sent_pack += - flush_cnt; - if (flush_cnt) - qeth_flush_buffers(queue, 1, index, flush_cnt); - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - } - } -} - -static void -qeth_qdio_output_handler(struct ccw_device * ccwdev, unsigned int status, - unsigned int qdio_error, unsigned int siga_error, - unsigned int __queue, int first_element, int count, - unsigned long card_ptr) -{ - struct qeth_card *card = (struct qeth_card *) card_ptr; - struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue]; - struct qeth_qdio_out_buffer *buffer; - int i; - - QETH_DBF_TEXT(trace, 6, "qdouhdl"); - if (status & QDIO_STATUS_LOOK_FOR_ERROR) { - if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION){ - QETH_DBF_TEXT(trace, 2, "achkcond"); - QETH_DBF_TEXT_(trace, 2, "%s", CARD_BUS_ID(card)); - QETH_DBF_TEXT_(trace, 2, "%08x", status); - netif_stop_queue(card->dev); - qeth_schedule_recovery(card); - return; - } - } - if (card->options.performance_stats) { - card->perf_stats.outbound_handler_cnt++; - card->perf_stats.outbound_handler_start_time = - qeth_get_micros(); - } - for(i = first_element; i < (first_element + count); ++i){ - buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; - /*we only handle the KICK_IT error by doing a recovery */ - if (qeth_handle_send_error(card, buffer, - qdio_error, siga_error) - == QETH_SEND_ERROR_KICK_IT){ - netif_stop_queue(card->dev); - qeth_schedule_recovery(card); - return; - } - qeth_clear_output_buffer(queue, buffer); - } - atomic_sub(count, &queue->used_buffers); - /* check if we need to do something on this outbound queue */ - if (card->info.type != QETH_CARD_TYPE_IQD) - qeth_check_outbound_queue(queue); - - netif_wake_queue(queue->card->dev); - if (card->options.performance_stats) - card->perf_stats.outbound_handler_time += qeth_get_micros() - - card->perf_stats.outbound_handler_start_time; -} - -static void -qeth_create_qib_param_field(struct qeth_card *card, char *param_field) -{ - - param_field[0] = _ascebc['P']; - param_field[1] = _ascebc['C']; - param_field[2] = _ascebc['I']; - param_field[3] = _ascebc['T']; - *((unsigned int *) (¶m_field[4])) = QETH_PCI_THRESHOLD_A(card); - *((unsigned int *) (¶m_field[8])) = QETH_PCI_THRESHOLD_B(card); - *((unsigned int *) (¶m_field[12])) = QETH_PCI_TIMER_VALUE(card); -} - -static void -qeth_create_qib_param_field_blkt(struct qeth_card *card, char *param_field) -{ - param_field[16] = _ascebc['B']; - param_field[17] = _ascebc['L']; - param_field[18] = _ascebc['K']; - param_field[19] = _ascebc['T']; - *((unsigned int *) (¶m_field[20])) = card->info.blkt.time_total; - *((unsigned int *) (¶m_field[24])) = card->info.blkt.inter_packet; - *((unsigned int *) (¶m_field[28])) = card->info.blkt.inter_packet_jumbo; -} - -static void -qeth_initialize_working_pool_list(struct qeth_card *card) -{ - struct qeth_buffer_pool_entry *entry; - - QETH_DBF_TEXT(trace,5,"inwrklst"); - - list_for_each_entry(entry, - &card->qdio.init_pool.entry_list, init_list) { - qeth_put_buffer_pool_entry(card,entry); - } -} - -static void -qeth_clear_working_pool_list(struct qeth_card *card) -{ - struct qeth_buffer_pool_entry *pool_entry, *tmp; - - QETH_DBF_TEXT(trace,5,"clwrklst"); - list_for_each_entry_safe(pool_entry, tmp, - &card->qdio.in_buf_pool.entry_list, list){ - list_del(&pool_entry->list); - } -} - -static void -qeth_free_buffer_pool(struct qeth_card *card) -{ - struct qeth_buffer_pool_entry *pool_entry, *tmp; - int i=0; - QETH_DBF_TEXT(trace,5,"freepool"); - list_for_each_entry_safe(pool_entry, tmp, - &card->qdio.init_pool.entry_list, init_list){ - for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i) - free_page((unsigned long)pool_entry->elements[i]); - list_del(&pool_entry->init_list); - kfree(pool_entry); - } -} - -static int -qeth_alloc_buffer_pool(struct qeth_card *card) -{ - struct qeth_buffer_pool_entry *pool_entry; - void *ptr; - int i, j; - - QETH_DBF_TEXT(trace,5,"alocpool"); - for (i = 0; i < card->qdio.init_pool.buf_count; ++i){ - pool_entry = kmalloc(sizeof(*pool_entry), GFP_KERNEL); - if (!pool_entry){ - qeth_free_buffer_pool(card); - return -ENOMEM; - } - for(j = 0; j < QETH_MAX_BUFFER_ELEMENTS(card); ++j){ - ptr = (void *) __get_free_page(GFP_KERNEL|GFP_DMA); - if (!ptr) { - while (j > 0) - free_page((unsigned long) - pool_entry->elements[--j]); - kfree(pool_entry); - qeth_free_buffer_pool(card); - return -ENOMEM; - } - pool_entry->elements[j] = ptr; - } - list_add(&pool_entry->init_list, - &card->qdio.init_pool.entry_list); - } - return 0; -} - -int -qeth_realloc_buffer_pool(struct qeth_card *card, int bufcnt) -{ - QETH_DBF_TEXT(trace, 2, "realcbp"); - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - /* TODO: steel/add buffers from/to a running card's buffer pool (?) */ - qeth_clear_working_pool_list(card); - qeth_free_buffer_pool(card); - card->qdio.in_buf_pool.buf_count = bufcnt; - card->qdio.init_pool.buf_count = bufcnt; - return qeth_alloc_buffer_pool(card); -} - -static int -qeth_alloc_qdio_buffers(struct qeth_card *card) -{ - int i, j; - - QETH_DBF_TEXT(setup, 2, "allcqdbf"); - - if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED, - QETH_QDIO_ALLOCATED) != QETH_QDIO_UNINITIALIZED) - return 0; - - card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), - GFP_KERNEL|GFP_DMA); - if (!card->qdio.in_q) - goto out_nomem; - QETH_DBF_TEXT(setup, 2, "inq"); - QETH_DBF_HEX(setup, 2, &card->qdio.in_q, sizeof(void *)); - memset(card->qdio.in_q, 0, sizeof(struct qeth_qdio_q)); - /* give inbound qeth_qdio_buffers their qdio_buffers */ - for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; ++i) - card->qdio.in_q->bufs[i].buffer = - &card->qdio.in_q->qdio_bufs[i]; - /* inbound buffer pool */ - if (qeth_alloc_buffer_pool(card)) - goto out_freeinq; - /* outbound */ - card->qdio.out_qs = - kmalloc(card->qdio.no_out_queues * - sizeof(struct qeth_qdio_out_q *), GFP_KERNEL); - if (!card->qdio.out_qs) - goto out_freepool; - for (i = 0; i < card->qdio.no_out_queues; ++i) { - card->qdio.out_qs[i] = kmalloc(sizeof(struct qeth_qdio_out_q), - GFP_KERNEL|GFP_DMA); - if (!card->qdio.out_qs[i]) - goto out_freeoutq; - QETH_DBF_TEXT_(setup, 2, "outq %i", i); - QETH_DBF_HEX(setup, 2, &card->qdio.out_qs[i], sizeof(void *)); - memset(card->qdio.out_qs[i], 0, sizeof(struct qeth_qdio_out_q)); - card->qdio.out_qs[i]->queue_no = i; - /* give outbound qeth_qdio_buffers their qdio_buffers */ - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j){ - card->qdio.out_qs[i]->bufs[j].buffer = - &card->qdio.out_qs[i]->qdio_bufs[j]; - skb_queue_head_init(&card->qdio.out_qs[i]->bufs[j]. - skb_list); - lockdep_set_class( - &card->qdio.out_qs[i]->bufs[j].skb_list.lock, - &qdio_out_skb_queue_key); - INIT_LIST_HEAD(&card->qdio.out_qs[i]->bufs[j].ctx_list); - } - } - return 0; - -out_freeoutq: - while (i > 0) - kfree(card->qdio.out_qs[--i]); - kfree(card->qdio.out_qs); - card->qdio.out_qs = NULL; -out_freepool: - qeth_free_buffer_pool(card); -out_freeinq: - kfree(card->qdio.in_q); - card->qdio.in_q = NULL; -out_nomem: - atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED); - return -ENOMEM; -} - -static void -qeth_free_qdio_buffers(struct qeth_card *card) -{ - int i, j; - - QETH_DBF_TEXT(trace, 2, "freeqdbf"); - if (atomic_xchg(&card->qdio.state, QETH_QDIO_UNINITIALIZED) == - QETH_QDIO_UNINITIALIZED) - return; - kfree(card->qdio.in_q); - card->qdio.in_q = NULL; - /* inbound buffer pool */ - qeth_free_buffer_pool(card); - /* free outbound qdio_qs */ - if (card->qdio.out_qs) { - for (i = 0; i < card->qdio.no_out_queues; ++i) { - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) - qeth_clear_output_buffer(card->qdio.out_qs[i], - &card->qdio.out_qs[i]->bufs[j]); - kfree(card->qdio.out_qs[i]); - } - kfree(card->qdio.out_qs); - card->qdio.out_qs = NULL; - } -} - -static void -qeth_clear_qdio_buffers(struct qeth_card *card) -{ - int i, j; - - QETH_DBF_TEXT(trace, 2, "clearqdbf"); - /* clear outbound buffers to free skbs */ - for (i = 0; i < card->qdio.no_out_queues; ++i) - if (card->qdio.out_qs && card->qdio.out_qs[i]) { - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) - qeth_clear_output_buffer(card->qdio.out_qs[i], - &card->qdio.out_qs[i]->bufs[j]); - } -} - -static void -qeth_init_qdio_info(struct qeth_card *card) -{ - QETH_DBF_TEXT(setup, 4, "intqdinf"); - atomic_set(&card->qdio.state, QETH_QDIO_UNINITIALIZED); - /* inbound */ - card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT; - card->qdio.init_pool.buf_count = QETH_IN_BUF_COUNT_DEFAULT; - card->qdio.in_buf_pool.buf_count = card->qdio.init_pool.buf_count; - INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list); - INIT_LIST_HEAD(&card->qdio.init_pool.entry_list); -} - -static int -qeth_init_qdio_queues(struct qeth_card *card) -{ - int i, j; - int rc; - - QETH_DBF_TEXT(setup, 2, "initqdqs"); - - /* inbound queue */ - memset(card->qdio.in_q->qdio_bufs, 0, - QDIO_MAX_BUFFERS_PER_Q * sizeof(struct qdio_buffer)); - qeth_initialize_working_pool_list(card); - /*give only as many buffers to hardware as we have buffer pool entries*/ - for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; ++i) - qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]); - card->qdio.in_q->next_buf_to_init = card->qdio.in_buf_pool.buf_count - 1; - rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, 0, - card->qdio.in_buf_pool.buf_count - 1, NULL); - if (rc) { - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - return rc; - } - rc = qdio_synchronize(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0); - if (rc) { - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - return rc; - } - /* outbound queue */ - for (i = 0; i < card->qdio.no_out_queues; ++i){ - memset(card->qdio.out_qs[i]->qdio_bufs, 0, - QDIO_MAX_BUFFERS_PER_Q * sizeof(struct qdio_buffer)); - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j){ - qeth_clear_output_buffer(card->qdio.out_qs[i], - &card->qdio.out_qs[i]->bufs[j]); - } - card->qdio.out_qs[i]->card = card; - card->qdio.out_qs[i]->next_buf_to_fill = 0; - card->qdio.out_qs[i]->do_pack = 0; - atomic_set(&card->qdio.out_qs[i]->used_buffers,0); - atomic_set(&card->qdio.out_qs[i]->set_pci_flags_count, 0); - atomic_set(&card->qdio.out_qs[i]->state, - QETH_OUT_Q_UNLOCKED); - } - return 0; -} - -static int -qeth_qdio_establish(struct qeth_card *card) -{ - struct qdio_initialize init_data; - char *qib_param_field; - struct qdio_buffer **in_sbal_ptrs; - struct qdio_buffer **out_sbal_ptrs; - int i, j, k; - int rc = 0; - - QETH_DBF_TEXT(setup, 2, "qdioest"); - - qib_param_field = kzalloc(QDIO_MAX_BUFFERS_PER_Q * sizeof(char), - GFP_KERNEL); - if (!qib_param_field) - return -ENOMEM; - - qeth_create_qib_param_field(card, qib_param_field); - qeth_create_qib_param_field_blkt(card, qib_param_field); - - in_sbal_ptrs = kmalloc(QDIO_MAX_BUFFERS_PER_Q * sizeof(void *), - GFP_KERNEL); - if (!in_sbal_ptrs) { - kfree(qib_param_field); - return -ENOMEM; - } - for(i = 0; i < QDIO_MAX_BUFFERS_PER_Q; ++i) - in_sbal_ptrs[i] = (struct qdio_buffer *) - virt_to_phys(card->qdio.in_q->bufs[i].buffer); - - out_sbal_ptrs = - kmalloc(card->qdio.no_out_queues * QDIO_MAX_BUFFERS_PER_Q * - sizeof(void *), GFP_KERNEL); - if (!out_sbal_ptrs) { - kfree(in_sbal_ptrs); - kfree(qib_param_field); - return -ENOMEM; - } - for(i = 0, k = 0; i < card->qdio.no_out_queues; ++i) - for(j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j, ++k){ - out_sbal_ptrs[k] = (struct qdio_buffer *) - virt_to_phys(card->qdio.out_qs[i]-> - bufs[j].buffer); - } - - memset(&init_data, 0, sizeof(struct qdio_initialize)); - init_data.cdev = CARD_DDEV(card); - init_data.q_format = qeth_get_qdio_q_format(card); - init_data.qib_param_field_format = 0; - init_data.qib_param_field = qib_param_field; - init_data.min_input_threshold = QETH_MIN_INPUT_THRESHOLD; - init_data.max_input_threshold = QETH_MAX_INPUT_THRESHOLD; - init_data.min_output_threshold = QETH_MIN_OUTPUT_THRESHOLD; - init_data.max_output_threshold = QETH_MAX_OUTPUT_THRESHOLD; - init_data.no_input_qs = 1; - init_data.no_output_qs = card->qdio.no_out_queues; - init_data.input_handler = (qdio_handler_t *) - qeth_qdio_input_handler; - init_data.output_handler = (qdio_handler_t *) - qeth_qdio_output_handler; - init_data.int_parm = (unsigned long) card; - init_data.flags = QDIO_INBOUND_0COPY_SBALS | - QDIO_OUTBOUND_0COPY_SBALS | - QDIO_USE_OUTBOUND_PCIS; - init_data.input_sbal_addr_array = (void **) in_sbal_ptrs; - init_data.output_sbal_addr_array = (void **) out_sbal_ptrs; - - if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED, - QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED) - if ((rc = qdio_initialize(&init_data))) - atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED); - - kfree(out_sbal_ptrs); - kfree(in_sbal_ptrs); - kfree(qib_param_field); - return rc; -} - -static int -qeth_qdio_activate(struct qeth_card *card) -{ - QETH_DBF_TEXT(setup,3,"qdioact"); - return qdio_activate(CARD_DDEV(card), 0); -} - -static int -qeth_clear_channel(struct qeth_channel *channel) -{ - unsigned long flags; - struct qeth_card *card; - int rc; - - QETH_DBF_TEXT(trace,3,"clearch"); - card = CARD_FROM_CDEV(channel->ccwdev); - spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); - rc = ccw_device_clear(channel->ccwdev, QETH_CLEAR_CHANNEL_PARM); - spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); - - if (rc) - return rc; - rc = wait_event_interruptible_timeout(card->wait_q, - channel->state==CH_STATE_STOPPED, QETH_TIMEOUT); - if (rc == -ERESTARTSYS) - return rc; - if (channel->state != CH_STATE_STOPPED) - return -ETIME; - channel->state = CH_STATE_DOWN; - return 0; -} - -static int -qeth_halt_channel(struct qeth_channel *channel) -{ - unsigned long flags; - struct qeth_card *card; - int rc; - - QETH_DBF_TEXT(trace,3,"haltch"); - card = CARD_FROM_CDEV(channel->ccwdev); - spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags); - rc = ccw_device_halt(channel->ccwdev, QETH_HALT_CHANNEL_PARM); - spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); - - if (rc) - return rc; - rc = wait_event_interruptible_timeout(card->wait_q, - channel->state==CH_STATE_HALTED, QETH_TIMEOUT); - if (rc == -ERESTARTSYS) - return rc; - if (channel->state != CH_STATE_HALTED) - return -ETIME; - return 0; -} - -static int -qeth_halt_channels(struct qeth_card *card) -{ - int rc1 = 0, rc2=0, rc3 = 0; - - QETH_DBF_TEXT(trace,3,"haltchs"); - rc1 = qeth_halt_channel(&card->read); - rc2 = qeth_halt_channel(&card->write); - rc3 = qeth_halt_channel(&card->data); - if (rc1) - return rc1; - if (rc2) - return rc2; - return rc3; -} -static int -qeth_clear_channels(struct qeth_card *card) -{ - int rc1 = 0, rc2=0, rc3 = 0; - - QETH_DBF_TEXT(trace,3,"clearchs"); - rc1 = qeth_clear_channel(&card->read); - rc2 = qeth_clear_channel(&card->write); - rc3 = qeth_clear_channel(&card->data); - if (rc1) - return rc1; - if (rc2) - return rc2; - return rc3; -} - -static int -qeth_clear_halt_card(struct qeth_card *card, int halt) -{ - int rc = 0; - - QETH_DBF_TEXT(trace,3,"clhacrd"); - QETH_DBF_HEX(trace, 3, &card, sizeof(void *)); - - if (halt) - rc = qeth_halt_channels(card); - if (rc) - return rc; - return qeth_clear_channels(card); -} - -static int -qeth_qdio_clear_card(struct qeth_card *card, int use_halt) -{ - int rc = 0; - - QETH_DBF_TEXT(trace,3,"qdioclr"); - switch (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ESTABLISHED, - QETH_QDIO_CLEANING)) { - case QETH_QDIO_ESTABLISHED: - if ((rc = qdio_cleanup(CARD_DDEV(card), - (card->info.type == QETH_CARD_TYPE_IQD) ? - QDIO_FLAG_CLEANUP_USING_HALT : - QDIO_FLAG_CLEANUP_USING_CLEAR))) - QETH_DBF_TEXT_(trace, 3, "1err%d", rc); - atomic_set(&card->qdio.state, QETH_QDIO_ALLOCATED); - break; - case QETH_QDIO_CLEANING: - return rc; - default: - break; - } - if ((rc = qeth_clear_halt_card(card, use_halt))) - QETH_DBF_TEXT_(trace, 3, "2err%d", rc); - card->state = CARD_STATE_DOWN; - return rc; -} - -static int -qeth_dm_act(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(setup,2,"dmact"); - - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data, DM_ACT, DM_ACT_SIZE); - - memcpy(QETH_DM_ACT_DEST_ADDR(iob->data), - &card->token.cm_connection_r, QETH_MPC_TOKEN_LENGTH); - memcpy(QETH_DM_ACT_CONNECTION_TOKEN(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); - rc = qeth_send_control_data(card, DM_ACT_SIZE, iob, NULL, NULL); - return rc; -} - -static int -qeth_mpc_initialize(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(setup,2,"mpcinit"); - - if ((rc = qeth_issue_next_read(card))){ - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - return rc; - } - if ((rc = qeth_cm_enable(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - goto out_qdio; - } - if ((rc = qeth_cm_setup(card))){ - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - goto out_qdio; - } - if ((rc = qeth_ulp_enable(card))){ - QETH_DBF_TEXT_(setup, 2, "4err%d", rc); - goto out_qdio; - } - if ((rc = qeth_ulp_setup(card))){ - QETH_DBF_TEXT_(setup, 2, "5err%d", rc); - goto out_qdio; - } - if ((rc = qeth_alloc_qdio_buffers(card))){ - QETH_DBF_TEXT_(setup, 2, "5err%d", rc); - goto out_qdio; - } - if ((rc = qeth_qdio_establish(card))){ - QETH_DBF_TEXT_(setup, 2, "6err%d", rc); - qeth_free_qdio_buffers(card); - goto out_qdio; - } - if ((rc = qeth_qdio_activate(card))){ - QETH_DBF_TEXT_(setup, 2, "7err%d", rc); - goto out_qdio; - } - if ((rc = qeth_dm_act(card))){ - QETH_DBF_TEXT_(setup, 2, "8err%d", rc); - goto out_qdio; - } - - return 0; -out_qdio: - qeth_qdio_clear_card(card, card->info.type!=QETH_CARD_TYPE_IQD); - return rc; -} - -static struct net_device * -qeth_get_netdevice(enum qeth_card_types type, enum qeth_link_types linktype) -{ - struct net_device *dev = NULL; - - switch (type) { - case QETH_CARD_TYPE_OSAE: - switch (linktype) { - case QETH_LINK_TYPE_LANE_TR: - case QETH_LINK_TYPE_HSTR: -#ifdef CONFIG_TR - dev = alloc_trdev(0); -#endif /* CONFIG_TR */ - break; - default: - dev = alloc_etherdev(0); - } - break; - case QETH_CARD_TYPE_IQD: - dev = alloc_netdev(0, "hsi%d", ether_setup); - break; - case QETH_CARD_TYPE_OSN: - dev = alloc_netdev(0, "osn%d", ether_setup); - break; - default: - dev = alloc_etherdev(0); - } - return dev; -} - -/*hard_header fake function; used in case fake_ll is set */ -static int -qeth_fake_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, const void *daddr, const void *saddr, - unsigned len) -{ - if(dev->type == ARPHRD_IEEE802_TR){ - struct trh_hdr *hdr; - hdr = (struct trh_hdr *)skb_push(skb, QETH_FAKE_LL_LEN_TR); - memcpy(hdr->saddr, dev->dev_addr, TR_ALEN); - memcpy(hdr->daddr, "FAKELL", TR_ALEN); - return QETH_FAKE_LL_LEN_TR; - - } else { - struct ethhdr *hdr; - hdr = (struct ethhdr *)skb_push(skb, QETH_FAKE_LL_LEN_ETH); - memcpy(hdr->h_source, dev->dev_addr, ETH_ALEN); - memcpy(hdr->h_dest, "FAKELL", ETH_ALEN); - if (type != ETH_P_802_3) - hdr->h_proto = htons(type); - else - hdr->h_proto = htons(len); - return QETH_FAKE_LL_LEN_ETH; - - } -} - -static const struct header_ops qeth_fake_ops = { - .create = qeth_fake_header, - .parse = qeth_hard_header_parse, -}; - -static int -qeth_send_packet(struct qeth_card *, struct sk_buff *); - -static int -qeth_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - int rc; - struct qeth_card *card; - - QETH_DBF_TEXT(trace, 6, "hrdstxmi"); - card = (struct qeth_card *)dev->priv; - if (skb==NULL) { - card->stats.tx_dropped++; - card->stats.tx_errors++; - /* return OK; otherwise ksoftirqd goes to 100% */ - return NETDEV_TX_OK; - } - if ((card->state != CARD_STATE_UP) || !card->lan_online) { - card->stats.tx_dropped++; - card->stats.tx_errors++; - card->stats.tx_carrier_errors++; - dev_kfree_skb_any(skb); - /* return OK; otherwise ksoftirqd goes to 100% */ - return NETDEV_TX_OK; - } - if (card->options.performance_stats) { - card->perf_stats.outbound_cnt++; - card->perf_stats.outbound_start_time = qeth_get_micros(); - } - netif_stop_queue(dev); - if ((rc = qeth_send_packet(card, skb))) { - if (rc == -EBUSY) { - return NETDEV_TX_BUSY; - } else { - card->stats.tx_errors++; - card->stats.tx_dropped++; - dev_kfree_skb_any(skb); - /*set to OK; otherwise ksoftirqd goes to 100% */ - rc = NETDEV_TX_OK; - } - } - netif_wake_queue(dev); - if (card->options.performance_stats) - card->perf_stats.outbound_time += qeth_get_micros() - - card->perf_stats.outbound_start_time; - return rc; -} - -static int -qeth_verify_vlan_dev(struct net_device *dev, struct qeth_card *card) -{ - int rc = 0; -#ifdef CONFIG_QETH_VLAN - struct vlan_group *vg; - int i; - - if (!(vg = card->vlangrp)) - return rc; - - for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++){ - if (vlan_group_get_device(vg, i) == dev){ - rc = QETH_VLAN_CARD; - break; - } - } - if (rc && !(vlan_dev_info(dev)->real_dev->priv == (void *)card)) - return 0; - -#endif - return rc; -} - -static int -qeth_verify_dev(struct net_device *dev) -{ - struct qeth_card *card; - unsigned long flags; - int rc = 0; - - read_lock_irqsave(&qeth_card_list.rwlock, flags); - list_for_each_entry(card, &qeth_card_list.list, list){ - if (card->dev == dev){ - rc = QETH_REAL_CARD; - break; - } - rc = qeth_verify_vlan_dev(dev, card); - if (rc) - break; - } - read_unlock_irqrestore(&qeth_card_list.rwlock, flags); - - return rc; -} - -static struct qeth_card * -qeth_get_card_from_dev(struct net_device *dev) -{ - struct qeth_card *card = NULL; - int rc; - - rc = qeth_verify_dev(dev); - if (rc == QETH_REAL_CARD) - card = (struct qeth_card *)dev->priv; - else if (rc == QETH_VLAN_CARD) - card = (struct qeth_card *) - vlan_dev_info(dev)->real_dev->priv; - - QETH_DBF_TEXT_(trace, 4, "%d", rc); - return card ; -} - -static void -qeth_tx_timeout(struct net_device *dev) -{ - struct qeth_card *card; - - card = (struct qeth_card *) dev->priv; - card->stats.tx_errors++; - qeth_schedule_recovery(card); -} - -static int -qeth_open(struct net_device *dev) -{ - struct qeth_card *card; - - QETH_DBF_TEXT(trace, 4, "qethopen"); - - card = (struct qeth_card *) dev->priv; - - if (card->state != CARD_STATE_SOFTSETUP) - return -ENODEV; - - if ( (card->info.type != QETH_CARD_TYPE_OSN) && - (card->options.layer2) && - (!(card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED))) { - QETH_DBF_TEXT(trace,4,"nomacadr"); - return -EPERM; - } - card->data.state = CH_STATE_UP; - card->state = CARD_STATE_UP; - card->dev->flags |= IFF_UP; - netif_start_queue(dev); - - if (!card->lan_online && netif_carrier_ok(dev)) - netif_carrier_off(dev); - return 0; -} - -static int -qeth_stop(struct net_device *dev) -{ - struct qeth_card *card; - - QETH_DBF_TEXT(trace, 4, "qethstop"); - - card = (struct qeth_card *) dev->priv; - - netif_tx_disable(dev); - card->dev->flags &= ~IFF_UP; - if (card->state == CARD_STATE_UP) - card->state = CARD_STATE_SOFTSETUP; - return 0; -} - -static int -qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb) -{ - int cast_type = RTN_UNSPEC; - - if (card->info.type == QETH_CARD_TYPE_OSN) - return cast_type; - - if (skb->dst && skb->dst->neighbour){ - cast_type = skb->dst->neighbour->type; - if ((cast_type == RTN_BROADCAST) || - (cast_type == RTN_MULTICAST) || - (cast_type == RTN_ANYCAST)) - return cast_type; - else - return RTN_UNSPEC; - } - /* try something else */ - if (skb->protocol == ETH_P_IPV6) - return (skb_network_header(skb)[24] == 0xff) ? - RTN_MULTICAST : 0; - else if (skb->protocol == ETH_P_IP) - return ((skb_network_header(skb)[16] & 0xf0) == 0xe0) ? - RTN_MULTICAST : 0; - /* ... */ - if (!memcmp(skb->data, skb->dev->broadcast, 6)) - return RTN_BROADCAST; - else { - u16 hdr_mac; - - hdr_mac = *((u16 *)skb->data); - /* tr multicast? */ - switch (card->info.link_type) { - case QETH_LINK_TYPE_HSTR: - case QETH_LINK_TYPE_LANE_TR: - if ((hdr_mac == QETH_TR_MAC_NC) || - (hdr_mac == QETH_TR_MAC_C)) - return RTN_MULTICAST; - break; - /* eth or so multicast? */ - default: - if ((hdr_mac == QETH_ETH_MAC_V4) || - (hdr_mac == QETH_ETH_MAC_V6)) - return RTN_MULTICAST; - } - } - return cast_type; -} - -static int -qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb, - int ipv, int cast_type) -{ - if (!ipv && (card->info.type == QETH_CARD_TYPE_OSAE)) - return card->qdio.default_out_queue; - switch (card->qdio.no_out_queues) { - case 4: - if (cast_type && card->info.is_multicast_different) - return card->info.is_multicast_different & - (card->qdio.no_out_queues - 1); - if (card->qdio.do_prio_queueing && (ipv == 4)) { - const u8 tos = ip_hdr(skb)->tos; - - if (card->qdio.do_prio_queueing==QETH_PRIO_Q_ING_TOS){ - if (tos & IP_TOS_NOTIMPORTANT) - return 3; - if (tos & IP_TOS_HIGHRELIABILITY) - return 2; - if (tos & IP_TOS_HIGHTHROUGHPUT) - return 1; - if (tos & IP_TOS_LOWDELAY) - return 0; - } - if (card->qdio.do_prio_queueing==QETH_PRIO_Q_ING_PREC) - return 3 - (tos >> 6); - } else if (card->qdio.do_prio_queueing && (ipv == 6)) { - /* TODO: IPv6!!! */ - } - return card->qdio.default_out_queue; - case 1: /* fallthrough for single-out-queue 1920-device */ - default: - return card->qdio.default_out_queue; - } -} - -static inline int -qeth_get_ip_version(struct sk_buff *skb) -{ - switch (skb->protocol) { - case ETH_P_IPV6: - return 6; - case ETH_P_IP: - return 4; - default: - return 0; - } -} - -static struct qeth_hdr * -__qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb, int ipv) -{ -#ifdef CONFIG_QETH_VLAN - u16 *tag; - if (card->vlangrp && vlan_tx_tag_present(skb) && - ((ipv == 6) || card->options.layer2) ) { - /* - * Move the mac addresses (6 bytes src, 6 bytes dest) - * to the beginning of the new header. We are using three - * memcpys instead of one memmove to save cycles. - */ - skb_push(skb, VLAN_HLEN); - skb_copy_to_linear_data(skb, skb->data + 4, 4); - skb_copy_to_linear_data_offset(skb, 4, skb->data + 8, 4); - skb_copy_to_linear_data_offset(skb, 8, skb->data + 12, 4); - tag = (u16 *)(skb->data + 12); - /* - * first two bytes = ETH_P_8021Q (0x8100) - * second two bytes = VLANID - */ - *tag = __constant_htons(ETH_P_8021Q); - *(tag + 1) = htons(vlan_tx_tag_get(skb)); - } -#endif - return ((struct qeth_hdr *) - qeth_push_skb(card, skb, sizeof(struct qeth_hdr))); -} - -static void -__qeth_free_new_skb(struct sk_buff *orig_skb, struct sk_buff *new_skb) -{ - if (orig_skb != new_skb) - dev_kfree_skb_any(new_skb); -} - -static struct sk_buff * -qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr **hdr, int ipv) -{ - struct sk_buff *new_skb, *new_skb2; - - QETH_DBF_TEXT(trace, 6, "prepskb"); - new_skb = skb; - new_skb = qeth_pskb_unshare(skb, GFP_ATOMIC); - if (!new_skb) - return NULL; - new_skb2 = qeth_realloc_headroom(card, new_skb, - sizeof(struct qeth_hdr)); - if (!new_skb2) { - __qeth_free_new_skb(skb, new_skb); - return NULL; - } - if (new_skb != skb) - __qeth_free_new_skb(new_skb2, new_skb); - new_skb = new_skb2; - *hdr = __qeth_prepare_skb(card, new_skb, ipv); - if (*hdr == NULL) { - __qeth_free_new_skb(skb, new_skb); - return NULL; - } - return new_skb; -} - -static inline u8 -qeth_get_qeth_hdr_flags4(int cast_type) -{ - if (cast_type == RTN_MULTICAST) - return QETH_CAST_MULTICAST; - if (cast_type == RTN_BROADCAST) - return QETH_CAST_BROADCAST; - return QETH_CAST_UNICAST; -} - -static inline u8 -qeth_get_qeth_hdr_flags6(int cast_type) -{ - u8 ct = QETH_HDR_PASSTHRU | QETH_HDR_IPV6; - if (cast_type == RTN_MULTICAST) - return ct | QETH_CAST_MULTICAST; - if (cast_type == RTN_ANYCAST) - return ct | QETH_CAST_ANYCAST; - if (cast_type == RTN_BROADCAST) - return ct | QETH_CAST_BROADCAST; - return ct | QETH_CAST_UNICAST; -} - -static void -qeth_layer2_get_packet_type(struct qeth_card *card, struct qeth_hdr *hdr, - struct sk_buff *skb) -{ - __u16 hdr_mac; - - if (!memcmp(skb->data+QETH_HEADER_SIZE, - skb->dev->broadcast,6)) { /* broadcast? */ - *(__u32 *)hdr->hdr.l2.flags |= - QETH_LAYER2_FLAG_BROADCAST << 8; - return; - } - hdr_mac=*((__u16*)skb->data); - /* tr multicast? */ - switch (card->info.link_type) { - case QETH_LINK_TYPE_HSTR: - case QETH_LINK_TYPE_LANE_TR: - if ((hdr_mac == QETH_TR_MAC_NC) || - (hdr_mac == QETH_TR_MAC_C) ) - *(__u32 *)hdr->hdr.l2.flags |= - QETH_LAYER2_FLAG_MULTICAST << 8; - else - *(__u32 *)hdr->hdr.l2.flags |= - QETH_LAYER2_FLAG_UNICAST << 8; - break; - /* eth or so multicast? */ - default: - if ( (hdr_mac==QETH_ETH_MAC_V4) || - (hdr_mac==QETH_ETH_MAC_V6) ) - *(__u32 *)hdr->hdr.l2.flags |= - QETH_LAYER2_FLAG_MULTICAST << 8; - else - *(__u32 *)hdr->hdr.l2.flags |= - QETH_LAYER2_FLAG_UNICAST << 8; - } -} - -static void -qeth_layer2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, - struct sk_buff *skb, int cast_type) -{ - memset(hdr, 0, sizeof(struct qeth_hdr)); - hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2; - - /* set byte 0 to "0x02" and byte 3 to casting flags */ - if (cast_type==RTN_MULTICAST) - *(__u32 *)hdr->hdr.l2.flags |= QETH_LAYER2_FLAG_MULTICAST << 8; - else if (cast_type==RTN_BROADCAST) - *(__u32 *)hdr->hdr.l2.flags |= QETH_LAYER2_FLAG_BROADCAST << 8; - else - qeth_layer2_get_packet_type(card, hdr, skb); - - hdr->hdr.l2.pkt_length = skb->len-QETH_HEADER_SIZE; -#ifdef CONFIG_QETH_VLAN - /* VSWITCH relies on the VLAN - * information to be present in - * the QDIO header */ - if ((card->vlangrp != NULL) && - vlan_tx_tag_present(skb)) { - *(__u32 *)hdr->hdr.l2.flags |= QETH_LAYER2_FLAG_VLAN << 8; - hdr->hdr.l2.vlan_id = vlan_tx_tag_get(skb); - } -#endif -} - -void -qeth_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, - struct sk_buff *skb, int ipv, int cast_type) -{ - QETH_DBF_TEXT(trace, 6, "fillhdr"); - - memset(hdr, 0, sizeof(struct qeth_hdr)); - if (card->options.layer2) { - qeth_layer2_fill_header(card, hdr, skb, cast_type); - return; - } - hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3; - hdr->hdr.l3.ext_flags = 0; -#ifdef CONFIG_QETH_VLAN - /* - * before we're going to overwrite this location with next hop ip. - * v6 uses passthrough, v4 sets the tag in the QDIO header. - */ - if (card->vlangrp && vlan_tx_tag_present(skb)) { - hdr->hdr.l3.ext_flags = (ipv == 4) ? - QETH_HDR_EXT_VLAN_FRAME : - QETH_HDR_EXT_INCLUDE_VLAN_TAG; - hdr->hdr.l3.vlan_id = vlan_tx_tag_get(skb); - } -#endif /* CONFIG_QETH_VLAN */ - hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr); - if (ipv == 4) { /* IPv4 */ - hdr->hdr.l3.flags = qeth_get_qeth_hdr_flags4(cast_type); - memset(hdr->hdr.l3.dest_addr, 0, 12); - if ((skb->dst) && (skb->dst->neighbour)) { - *((u32 *) (&hdr->hdr.l3.dest_addr[12])) = - *((u32 *) skb->dst->neighbour->primary_key); - } else { - /* fill in destination address used in ip header */ - *((u32 *)(&hdr->hdr.l3.dest_addr[12])) = - ip_hdr(skb)->daddr; - } - } else if (ipv == 6) { /* IPv6 or passthru */ - hdr->hdr.l3.flags = qeth_get_qeth_hdr_flags6(cast_type); - if ((skb->dst) && (skb->dst->neighbour)) { - memcpy(hdr->hdr.l3.dest_addr, - skb->dst->neighbour->primary_key, 16); - } else { - /* fill in destination address used in ip header */ - memcpy(hdr->hdr.l3.dest_addr, - &ipv6_hdr(skb)->daddr, 16); - } - } else { /* passthrough */ - if((skb->dev->type == ARPHRD_IEEE802_TR) && - !memcmp(skb->data + sizeof(struct qeth_hdr) + - sizeof(__u16), skb->dev->broadcast, 6)) { - hdr->hdr.l3.flags = QETH_CAST_BROADCAST | - QETH_HDR_PASSTHRU; - } else if (!memcmp(skb->data + sizeof(struct qeth_hdr), - skb->dev->broadcast, 6)) { /* broadcast? */ - hdr->hdr.l3.flags = QETH_CAST_BROADCAST | - QETH_HDR_PASSTHRU; - } else { - hdr->hdr.l3.flags = (cast_type == RTN_MULTICAST) ? - QETH_CAST_MULTICAST | QETH_HDR_PASSTHRU : - QETH_CAST_UNICAST | QETH_HDR_PASSTHRU; - } - } -} - -static void -__qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, - int is_tso, int *next_element_to_fill) -{ - int length = skb->len; - int length_here; - int element; - char *data; - int first_lap ; - - element = *next_element_to_fill; - data = skb->data; - first_lap = (is_tso == 0 ? 1 : 0); - - while (length > 0) { - /* length_here is the remaining amount of data in this page */ - length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); - if (length < length_here) - length_here = length; - - buffer->element[element].addr = data; - buffer->element[element].length = length_here; - length -= length_here; - if (!length) { - if (first_lap) - buffer->element[element].flags = 0; - else - buffer->element[element].flags = - SBAL_FLAGS_LAST_FRAG; - } else { - if (first_lap) - buffer->element[element].flags = - SBAL_FLAGS_FIRST_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - } - data += length_here; - element++; - first_lap = 0; - } - *next_element_to_fill = element; -} - -static int -qeth_fill_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, - struct sk_buff *skb) -{ - struct qdio_buffer *buffer; - struct qeth_hdr_tso *hdr; - int flush_cnt = 0, hdr_len, large_send = 0; - - QETH_DBF_TEXT(trace, 6, "qdfillbf"); - - buffer = buf->buffer; - atomic_inc(&skb->users); - skb_queue_tail(&buf->skb_list, skb); - - hdr = (struct qeth_hdr_tso *) skb->data; - /*check first on TSO ....*/ - if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { - int element = buf->next_element_to_fill; - - hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; - /*fill first buffer entry only with header information */ - buffer->element[element].addr = skb->data; - buffer->element[element].length = hdr_len; - buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; - buf->next_element_to_fill++; - skb->data += hdr_len; - skb->len -= hdr_len; - large_send = 1; - } - if (skb_shinfo(skb)->nr_frags == 0) - __qeth_fill_buffer(skb, buffer, large_send, - (int *)&buf->next_element_to_fill); - else - __qeth_fill_buffer_frag(skb, buffer, large_send, - (int *)&buf->next_element_to_fill); - - if (!queue->do_pack) { - QETH_DBF_TEXT(trace, 6, "fillbfnp"); - /* set state to PRIMED -> will be flushed */ - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - flush_cnt = 1; - } else { - QETH_DBF_TEXT(trace, 6, "fillbfpa"); - if (queue->card->options.performance_stats) - queue->card->perf_stats.skbs_sent_pack++; - if (buf->next_element_to_fill >= - QETH_MAX_BUFFER_ELEMENTS(queue->card)) { - /* - * packed buffer if full -> set state PRIMED - * -> will be flushed - */ - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - flush_cnt = 1; - } - } - return flush_cnt; -} - -static int -qeth_do_send_packet_fast(struct qeth_card *card, struct qeth_qdio_out_q *queue, - struct sk_buff *skb, struct qeth_hdr *hdr, - int elements_needed, - struct qeth_eddp_context *ctx) -{ - struct qeth_qdio_out_buffer *buffer; - int buffers_needed = 0; - int flush_cnt = 0; - int index; - - QETH_DBF_TEXT(trace, 6, "dosndpfa"); - - /* spin until we get the queue ... */ - while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED, - QETH_OUT_Q_LOCKED) != QETH_OUT_Q_UNLOCKED); - /* ... now we've got the queue */ - index = queue->next_buf_to_fill; - buffer = &queue->bufs[queue->next_buf_to_fill]; - /* - * check if buffer is empty to make sure that we do not 'overtake' - * ourselves and try to fill a buffer that is already primed - */ - if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) - goto out; - if (ctx == NULL) - queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) % - QDIO_MAX_BUFFERS_PER_Q; - else { - buffers_needed = qeth_eddp_check_buffers_for_context(queue,ctx); - if (buffers_needed < 0) - goto out; - queue->next_buf_to_fill = - (queue->next_buf_to_fill + buffers_needed) % - QDIO_MAX_BUFFERS_PER_Q; - } - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - if (ctx == NULL) { - qeth_fill_buffer(queue, buffer, skb); - qeth_flush_buffers(queue, 0, index, 1); - } else { - flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); - WARN_ON(buffers_needed != flush_cnt); - qeth_flush_buffers(queue, 0, index, flush_cnt); - } - return 0; -out: - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - return -EBUSY; -} - -static int -qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, - struct sk_buff *skb, struct qeth_hdr *hdr, - int elements_needed, struct qeth_eddp_context *ctx) -{ - struct qeth_qdio_out_buffer *buffer; - int start_index; - int flush_count = 0; - int do_pack = 0; - int tmp; - int rc = 0; - - QETH_DBF_TEXT(trace, 6, "dosndpkt"); - - /* spin until we get the queue ... */ - while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED, - QETH_OUT_Q_LOCKED) != QETH_OUT_Q_UNLOCKED); - start_index = queue->next_buf_to_fill; - buffer = &queue->bufs[queue->next_buf_to_fill]; - /* - * check if buffer is empty to make sure that we do not 'overtake' - * ourselves and try to fill a buffer that is already primed - */ - if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) { - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - return -EBUSY; - } - /* check if we need to switch packing state of this queue */ - qeth_switch_to_packing_if_needed(queue); - if (queue->do_pack){ - do_pack = 1; - if (ctx == NULL) { - /* does packet fit in current buffer? */ - if((QETH_MAX_BUFFER_ELEMENTS(card) - - buffer->next_element_to_fill) < elements_needed){ - /* ... no -> set state PRIMED */ - atomic_set(&buffer->state,QETH_QDIO_BUF_PRIMED); - flush_count++; - queue->next_buf_to_fill = - (queue->next_buf_to_fill + 1) % - QDIO_MAX_BUFFERS_PER_Q; - buffer = &queue->bufs[queue->next_buf_to_fill]; - /* we did a step forward, so check buffer state - * again */ - if (atomic_read(&buffer->state) != - QETH_QDIO_BUF_EMPTY){ - qeth_flush_buffers(queue, 0, start_index, flush_count); - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - return -EBUSY; - } - } - } else { - /* check if we have enough elements (including following - * free buffers) to handle eddp context */ - if (qeth_eddp_check_buffers_for_context(queue,ctx) < 0){ - if (net_ratelimit()) - PRINT_WARN("eddp tx_dropped 1\n"); - rc = -EBUSY; - goto out; - } - } - } - if (ctx == NULL) - tmp = qeth_fill_buffer(queue, buffer, skb); - else { - tmp = qeth_eddp_fill_buffer(queue,ctx,queue->next_buf_to_fill); - if (tmp < 0) { - printk("eddp tx_dropped 2\n"); - rc = - EBUSY; - goto out; - } - } - queue->next_buf_to_fill = (queue->next_buf_to_fill + tmp) % - QDIO_MAX_BUFFERS_PER_Q; - flush_count += tmp; -out: - if (flush_count) - qeth_flush_buffers(queue, 0, start_index, flush_count); - else if (!atomic_read(&queue->set_pci_flags_count)) - atomic_xchg(&queue->state, QETH_OUT_Q_LOCKED_FLUSH); - /* - * queue->state will go from LOCKED -> UNLOCKED or from - * LOCKED_FLUSH -> LOCKED if output_handler wanted to 'notify' us - * (switch packing state or flush buffer to get another pci flag out). - * In that case we will enter this loop - */ - while (atomic_dec_return(&queue->state)){ - flush_count = 0; - start_index = queue->next_buf_to_fill; - /* check if we can go back to non-packing state */ - flush_count += qeth_switch_to_nonpacking_if_needed(queue); - /* - * check if we need to flush a packing buffer to get a pci - * flag out on the queue - */ - if (!flush_count && !atomic_read(&queue->set_pci_flags_count)) - flush_count += qeth_flush_buffers_on_no_pci(queue); - if (flush_count) - qeth_flush_buffers(queue, 0, start_index, flush_count); - } - /* at this point the queue is UNLOCKED again */ - if (queue->card->options.performance_stats && do_pack) - queue->card->perf_stats.bufs_sent_pack += flush_count; - - return rc; -} - -static int -qeth_get_elements_no(struct qeth_card *card, void *hdr, - struct sk_buff *skb, int elems) -{ - int elements_needed = 0; - - if (skb_shinfo(skb)->nr_frags > 0) - elements_needed = (skb_shinfo(skb)->nr_frags + 1); - if (elements_needed == 0) - elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) - + skb->len) >> PAGE_SHIFT); - if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)){ - PRINT_ERR("Invalid size of IP packet " - "(Number=%d / Length=%d). Discarded.\n", - (elements_needed+elems), skb->len); - return 0; - } - return elements_needed; -} - -static void qeth_tx_csum(struct sk_buff *skb) -{ - int tlen; - - if (skb->protocol == htons(ETH_P_IP)) { - tlen = ntohs(ip_hdr(skb)->tot_len) - (ip_hdr(skb)->ihl << 2); - switch (ip_hdr(skb)->protocol) { - case IPPROTO_TCP: - tcp_hdr(skb)->check = 0; - tcp_hdr(skb)->check = csum_tcpudp_magic( - ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, - tlen, ip_hdr(skb)->protocol, - skb_checksum(skb, skb_transport_offset(skb), - tlen, 0)); - break; - case IPPROTO_UDP: - udp_hdr(skb)->check = 0; - udp_hdr(skb)->check = csum_tcpudp_magic( - ip_hdr(skb)->saddr, ip_hdr(skb)->daddr, - tlen, ip_hdr(skb)->protocol, - skb_checksum(skb, skb_transport_offset(skb), - tlen, 0)); - break; - } - } else if (skb->protocol == htons(ETH_P_IPV6)) { - switch (ipv6_hdr(skb)->nexthdr) { - case IPPROTO_TCP: - tcp_hdr(skb)->check = 0; - tcp_hdr(skb)->check = csum_ipv6_magic( - &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, - ipv6_hdr(skb)->payload_len, - ipv6_hdr(skb)->nexthdr, - skb_checksum(skb, skb_transport_offset(skb), - ipv6_hdr(skb)->payload_len, 0)); - break; - case IPPROTO_UDP: - udp_hdr(skb)->check = 0; - udp_hdr(skb)->check = csum_ipv6_magic( - &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, - ipv6_hdr(skb)->payload_len, - ipv6_hdr(skb)->nexthdr, - skb_checksum(skb, skb_transport_offset(skb), - ipv6_hdr(skb)->payload_len, 0)); - break; - } - } -} - -static int -qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) -{ - int ipv = 0; - int cast_type; - struct qeth_qdio_out_q *queue; - struct qeth_hdr *hdr = NULL; - int elements_needed = 0; - enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; - struct qeth_eddp_context *ctx = NULL; - int tx_bytes = skb->len; - unsigned short nr_frags = skb_shinfo(skb)->nr_frags; - unsigned short tso_size = skb_shinfo(skb)->gso_size; - struct sk_buff *new_skb, *new_skb2; - int rc; - - QETH_DBF_TEXT(trace, 6, "sendpkt"); - - new_skb = skb; - if ((card->info.type == QETH_CARD_TYPE_OSN) && - (skb->protocol == htons(ETH_P_IPV6))) - return -EPERM; - cast_type = qeth_get_cast_type(card, skb); - if ((cast_type == RTN_BROADCAST) && - (card->info.broadcast_capable == 0)) - return -EPERM; - queue = card->qdio.out_qs - [qeth_get_priority_queue(card, skb, ipv, cast_type)]; - if (!card->options.layer2) { - ipv = qeth_get_ip_version(skb); - if ((card->dev->header_ops == &qeth_fake_ops) && ipv) { - new_skb = qeth_pskb_unshare(skb, GFP_ATOMIC); - if (!new_skb) - return -ENOMEM; - if(card->dev->type == ARPHRD_IEEE802_TR){ - skb_pull(new_skb, QETH_FAKE_LL_LEN_TR); - } else { - skb_pull(new_skb, QETH_FAKE_LL_LEN_ETH); - } - } - } - if (skb_is_gso(skb)) - large_send = card->options.large_send; - /* check on OSN device*/ - if (card->info.type == QETH_CARD_TYPE_OSN) - hdr = (struct qeth_hdr *)new_skb->data; - /*are we able to do TSO ? */ - if ((large_send == QETH_LARGE_SEND_TSO) && - (cast_type == RTN_UNSPEC)) { - rc = qeth_tso_prepare_packet(card, new_skb, ipv, cast_type); - if (rc) { - __qeth_free_new_skb(skb, new_skb); - return rc; - } - elements_needed++; - } else if (card->info.type != QETH_CARD_TYPE_OSN) { - new_skb2 = qeth_prepare_skb(card, new_skb, &hdr, ipv); - if (!new_skb2) { - __qeth_free_new_skb(skb, new_skb); - return -EINVAL; - } - if (new_skb != skb) - __qeth_free_new_skb(new_skb2, new_skb); - new_skb = new_skb2; - qeth_fill_header(card, hdr, new_skb, ipv, cast_type); - } - if (large_send == QETH_LARGE_SEND_EDDP) { - ctx = qeth_eddp_create_context(card, new_skb, hdr, - skb->sk->sk_protocol); - if (ctx == NULL) { - __qeth_free_new_skb(skb, new_skb); - PRINT_WARN("could not create eddp context\n"); - return -EINVAL; - } - } else { - int elems = qeth_get_elements_no(card,(void*) hdr, new_skb, - elements_needed); - if (!elems) { - __qeth_free_new_skb(skb, new_skb); - return -EINVAL; - } - elements_needed += elems; - } - - if ((large_send == QETH_LARGE_SEND_NO) && - (skb->ip_summed == CHECKSUM_PARTIAL)) - qeth_tx_csum(new_skb); - - if (card->info.type != QETH_CARD_TYPE_IQD) - rc = qeth_do_send_packet(card, queue, new_skb, hdr, - elements_needed, ctx); - else { - if ((!card->options.layer2) && - (ipv == 0)) { - __qeth_free_new_skb(skb, new_skb); - return -EPERM; - } - rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements_needed, ctx); - } - if (!rc) { - card->stats.tx_packets++; - card->stats.tx_bytes += tx_bytes; - if (new_skb != skb) - dev_kfree_skb_any(skb); - if (card->options.performance_stats) { - if (tso_size && - !(large_send == QETH_LARGE_SEND_NO)) { - card->perf_stats.large_send_bytes += tx_bytes; - card->perf_stats.large_send_cnt++; - } - if (nr_frags > 0) { - card->perf_stats.sg_skbs_sent++; - /* nr_frags + skb->data */ - card->perf_stats.sg_frags_sent += - nr_frags + 1; - } - } - } else { - card->stats.tx_dropped++; - __qeth_free_new_skb(skb, new_skb); - } - if (ctx != NULL) { - /* drop creator's reference */ - qeth_eddp_put_context(ctx); - /* free skb; it's not referenced by a buffer */ - if (!rc) - dev_kfree_skb_any(new_skb); - } - return rc; -} - -static int -qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) -{ - struct qeth_card *card = (struct qeth_card *) dev->priv; - int rc = 0; - - switch(regnum){ - case MII_BMCR: /* Basic mode control register */ - rc = BMCR_FULLDPLX; - if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH)&& - (card->info.link_type != QETH_LINK_TYPE_OSN) && - (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) - rc |= BMCR_SPEED100; - break; - case MII_BMSR: /* Basic mode status register */ - rc = BMSR_ERCAP | BMSR_ANEGCOMPLETE | BMSR_LSTATUS | - BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | BMSR_100FULL | - BMSR_100BASE4; - break; - case MII_PHYSID1: /* PHYS ID 1 */ - rc = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 8) | - dev->dev_addr[2]; - rc = (rc >> 5) & 0xFFFF; - break; - case MII_PHYSID2: /* PHYS ID 2 */ - rc = (dev->dev_addr[2] << 10) & 0xFFFF; - break; - case MII_ADVERTISE: /* Advertisement control reg */ - rc = ADVERTISE_ALL; - break; - case MII_LPA: /* Link partner ability reg */ - rc = LPA_10HALF | LPA_10FULL | LPA_100HALF | LPA_100FULL | - LPA_100BASE4 | LPA_LPACK; - break; - case MII_EXPANSION: /* Expansion register */ - break; - case MII_DCOUNTER: /* disconnect counter */ - break; - case MII_FCSCOUNTER: /* false carrier counter */ - break; - case MII_NWAYTEST: /* N-way auto-neg test register */ - break; - case MII_RERRCOUNTER: /* rx error counter */ - rc = card->stats.rx_errors; - break; - case MII_SREVISION: /* silicon revision */ - break; - case MII_RESV1: /* reserved 1 */ - break; - case MII_LBRERROR: /* loopback, rx, bypass error */ - break; - case MII_PHYADDR: /* physical address */ - break; - case MII_RESV2: /* reserved 2 */ - break; - case MII_TPISTATUS: /* TPI status for 10mbps */ - break; - case MII_NCONFIG: /* network interface config */ - break; - default: - break; - } - return rc; -} - - -static const char * -qeth_arp_get_error_cause(int *rc) -{ - switch (*rc) { - case QETH_IPA_ARP_RC_FAILED: - *rc = -EIO; - return "operation failed"; - case QETH_IPA_ARP_RC_NOTSUPP: - *rc = -EOPNOTSUPP; - return "operation not supported"; - case QETH_IPA_ARP_RC_OUT_OF_RANGE: - *rc = -EINVAL; - return "argument out of range"; - case QETH_IPA_ARP_RC_Q_NOTSUPP: - *rc = -EOPNOTSUPP; - return "query operation not supported"; - case QETH_IPA_ARP_RC_Q_NO_DATA: - *rc = -ENOENT; - return "no query data available"; - default: - return "unknown error"; - } -} - -static int -qeth_send_simple_setassparms(struct qeth_card *, enum qeth_ipa_funcs, - __u16, long); - -static int -qeth_arp_set_no_entries(struct qeth_card *card, int no_entries) -{ - int tmp; - int rc; - - QETH_DBF_TEXT(trace,3,"arpstnoe"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_SET_NO_ENTRIES; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan) - return -EOPNOTSUPP; - if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_SET_NO_ENTRIES, - no_entries); - if (rc) { - tmp = rc; - PRINT_WARN("Could not set number of ARP entries on %s: " - "%s (0x%x/%d)\n", - QETH_CARD_IFNAME(card), qeth_arp_get_error_cause(&rc), - tmp, tmp); - } - return rc; -} - -static void -qeth_copy_arp_entries_stripped(struct qeth_arp_query_info *qinfo, - struct qeth_arp_query_data *qdata, - int entry_size, int uentry_size) -{ - char *entry_ptr; - char *uentry_ptr; - int i; - - entry_ptr = (char *)&qdata->data; - uentry_ptr = (char *)(qinfo->udata + qinfo->udata_offset); - for (i = 0; i < qdata->no_entries; ++i){ - /* strip off 32 bytes "media specific information" */ - memcpy(uentry_ptr, (entry_ptr + 32), entry_size - 32); - entry_ptr += entry_size; - uentry_ptr += uentry_size; - } -} - -static int -qeth_arp_query_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - struct qeth_arp_query_data *qdata; - struct qeth_arp_query_info *qinfo; - int entry_size; - int uentry_size; - int i; - - QETH_DBF_TEXT(trace,4,"arpquecb"); - - qinfo = (struct qeth_arp_query_info *) reply->param; - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code) { - QETH_DBF_TEXT_(trace,4,"qaer1%i", cmd->hdr.return_code); - return 0; - } - if (cmd->data.setassparms.hdr.return_code) { - cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code; - QETH_DBF_TEXT_(trace,4,"qaer2%i", cmd->hdr.return_code); - return 0; - } - qdata = &cmd->data.setassparms.data.query_arp; - switch(qdata->reply_bits){ - case 5: - uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry5); - if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) - uentry_size = sizeof(struct qeth_arp_qi_entry5_short); - break; - case 7: - /* fall through to default */ - default: - /* tr is the same as eth -> entry7 */ - uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry7); - if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) - uentry_size = sizeof(struct qeth_arp_qi_entry7_short); - break; - } - /* check if there is enough room in userspace */ - if ((qinfo->udata_len - qinfo->udata_offset) < - qdata->no_entries * uentry_size){ - QETH_DBF_TEXT_(trace, 4, "qaer3%i", -ENOMEM); - cmd->hdr.return_code = -ENOMEM; - PRINT_WARN("query ARP user space buffer is too small for " - "the returned number of ARP entries. " - "Aborting query!\n"); - goto out_error; - } - QETH_DBF_TEXT_(trace, 4, "anore%i", - cmd->data.setassparms.hdr.number_of_replies); - QETH_DBF_TEXT_(trace, 4, "aseqn%i", cmd->data.setassparms.hdr.seq_no); - QETH_DBF_TEXT_(trace, 4, "anoen%i", qdata->no_entries); - - if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) { - /* strip off "media specific information" */ - qeth_copy_arp_entries_stripped(qinfo, qdata, entry_size, - uentry_size); - } else - /*copy entries to user buffer*/ - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)&qdata->data, qdata->no_entries*uentry_size); - - qinfo->no_entries += qdata->no_entries; - qinfo->udata_offset += (qdata->no_entries*uentry_size); - /* check if all replies received ... */ - if (cmd->data.setassparms.hdr.seq_no < - cmd->data.setassparms.hdr.number_of_replies) - return 1; - memcpy(qinfo->udata, &qinfo->no_entries, 4); - /* keep STRIP_ENTRIES flag so the user program can distinguish - * stripped entries from normal ones */ - if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) - qdata->reply_bits |= QETH_QARP_STRIP_ENTRIES; - memcpy(qinfo->udata + QETH_QARP_MASK_OFFSET,&qdata->reply_bits,2); - return 0; -out_error: - i = 0; - memcpy(qinfo->udata, &i, 4); - return 0; -} - -static int -qeth_send_ipa_arp_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, - int len, int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, - unsigned long), - void *reply_param) -{ - QETH_DBF_TEXT(trace,4,"sendarp"); - - memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); - memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); - return qeth_send_control_data(card, IPA_PDU_HEADER_SIZE + len, iob, - reply_cb, reply_param); -} - -static int -qeth_send_ipa_snmp_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, - int len, int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, - unsigned long), - void *reply_param) -{ - u16 s1, s2; - - QETH_DBF_TEXT(trace,4,"sendsnmp"); - - memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); - memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); - /* adjust PDU length fields in IPA_PDU_HEADER */ - s1 = (u32) IPA_PDU_HEADER_SIZE + len; - s2 = (u32) len; - memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); - memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); - memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); - memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); - return qeth_send_control_data(card, IPA_PDU_HEADER_SIZE + len, iob, - reply_cb, reply_param); -} - -static struct qeth_cmd_buffer * -qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs, - __u16, __u16, enum qeth_prot_versions); -static int -qeth_arp_query(struct qeth_card *card, char __user *udata) -{ - struct qeth_cmd_buffer *iob; - struct qeth_arp_query_info qinfo = {0, }; - int tmp; - int rc; - - QETH_DBF_TEXT(trace,3,"arpquery"); - - if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/ - IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - /* get size of userspace buffer and mask_bits -> 6 bytes */ - if (copy_from_user(&qinfo, udata, 6)) - return -EFAULT; - if (!(qinfo.udata = kzalloc(qinfo.udata_len, GFP_KERNEL))) - return -ENOMEM; - qinfo.udata_offset = QETH_QARP_ENTRIES_OFFSET; - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_QUERY_INFO, - sizeof(int),QETH_PROT_IPV4); - - rc = qeth_send_ipa_arp_cmd(card, iob, - QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN, - qeth_arp_query_cb, (void *)&qinfo); - if (rc) { - tmp = rc; - PRINT_WARN("Error while querying ARP cache on %s: %s " - "(0x%x/%d)\n", - QETH_CARD_IFNAME(card), qeth_arp_get_error_cause(&rc), - tmp, tmp); - if (copy_to_user(udata, qinfo.udata, 4)) - rc = -EFAULT; - } else { - if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) - rc = -EFAULT; - } - kfree(qinfo.udata); - return rc; -} - -/** - * SNMP command callback - */ -static int -qeth_snmp_command_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long sdata) -{ - struct qeth_ipa_cmd *cmd; - struct qeth_arp_query_info *qinfo; - struct qeth_snmp_cmd *snmp; - unsigned char *data; - __u16 data_len; - - QETH_DBF_TEXT(trace,3,"snpcmdcb"); - - cmd = (struct qeth_ipa_cmd *) sdata; - data = (unsigned char *)((char *)cmd - reply->offset); - qinfo = (struct qeth_arp_query_info *) reply->param; - snmp = &cmd->data.setadapterparms.data.snmp; - - if (cmd->hdr.return_code) { - QETH_DBF_TEXT_(trace,4,"scer1%i", cmd->hdr.return_code); - return 0; - } - if (cmd->data.setadapterparms.hdr.return_code) { - cmd->hdr.return_code = cmd->data.setadapterparms.hdr.return_code; - QETH_DBF_TEXT_(trace,4,"scer2%i", cmd->hdr.return_code); - return 0; - } - data_len = *((__u16*)QETH_IPA_PDU_LEN_PDU1(data)); - if (cmd->data.setadapterparms.hdr.seq_no == 1) - data_len -= (__u16)((char *)&snmp->data - (char *)cmd); - else - data_len -= (__u16)((char*)&snmp->request - (char *)cmd); - - /* check if there is enough room in userspace */ - if ((qinfo->udata_len - qinfo->udata_offset) < data_len) { - QETH_DBF_TEXT_(trace, 4, "scer3%i", -ENOMEM); - cmd->hdr.return_code = -ENOMEM; - return 0; - } - QETH_DBF_TEXT_(trace, 4, "snore%i", - cmd->data.setadapterparms.hdr.used_total); - QETH_DBF_TEXT_(trace, 4, "sseqn%i", cmd->data.setadapterparms.hdr.seq_no); - /*copy entries to user buffer*/ - if (cmd->data.setadapterparms.hdr.seq_no == 1) { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)snmp, - data_len + offsetof(struct qeth_snmp_cmd,data)); - qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data); - } else { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)&snmp->request, data_len); - } - qinfo->udata_offset += data_len; - /* check if all replies received ... */ - QETH_DBF_TEXT_(trace, 4, "srtot%i", - cmd->data.setadapterparms.hdr.used_total); - QETH_DBF_TEXT_(trace, 4, "srseq%i", - cmd->data.setadapterparms.hdr.seq_no); - if (cmd->data.setadapterparms.hdr.seq_no < - cmd->data.setadapterparms.hdr.used_total) - return 1; - return 0; -} - -static struct qeth_cmd_buffer * -qeth_get_ipacmd_buffer(struct qeth_card *, enum qeth_ipa_cmds, - enum qeth_prot_versions ); - -static struct qeth_cmd_buffer * -qeth_get_adapter_cmd(struct qeth_card *card, __u32 command, __u32 cmdlen) -{ - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - iob = qeth_get_ipacmd_buffer(card,IPA_CMD_SETADAPTERPARMS, - QETH_PROT_IPV4); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setadapterparms.hdr.cmdlength = cmdlen; - cmd->data.setadapterparms.hdr.command_code = command; - cmd->data.setadapterparms.hdr.used_total = 1; - cmd->data.setadapterparms.hdr.seq_no = 1; - - return iob; -} - -/** - * function to send SNMP commands to OSA-E card - */ -static int -qeth_snmp_command(struct qeth_card *card, char __user *udata) -{ - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - struct qeth_snmp_ureq *ureq; - int req_len; - struct qeth_arp_query_info qinfo = {0, }; - int rc = 0; - - QETH_DBF_TEXT(trace,3,"snmpcmd"); - - if (card->info.guestlan) - return -EOPNOTSUPP; - - if ((!qeth_adp_supported(card,IPA_SETADP_SET_SNMP_CONTROL)) && - (!card->options.layer2) ) { - PRINT_WARN("SNMP Query MIBS not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - /* skip 4 bytes (data_len struct member) to get req_len */ - if (copy_from_user(&req_len, udata + sizeof(int), sizeof(int))) - return -EFAULT; - ureq = kmalloc(req_len+sizeof(struct qeth_snmp_ureq_hdr), GFP_KERNEL); - if (!ureq) { - QETH_DBF_TEXT(trace, 2, "snmpnome"); - return -ENOMEM; - } - if (copy_from_user(ureq, udata, - req_len+sizeof(struct qeth_snmp_ureq_hdr))){ - kfree(ureq); - return -EFAULT; - } - qinfo.udata_len = ureq->hdr.data_len; - if (!(qinfo.udata = kzalloc(qinfo.udata_len, GFP_KERNEL))){ - kfree(ureq); - return -ENOMEM; - } - qinfo.udata_offset = sizeof(struct qeth_snmp_ureq_hdr); - - iob = qeth_get_adapter_cmd(card, IPA_SETADP_SET_SNMP_CONTROL, - QETH_SNMP_SETADP_CMDLENGTH + req_len); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - memcpy(&cmd->data.setadapterparms.data.snmp, &ureq->cmd, req_len); - rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, - qeth_snmp_command_cb, (void *)&qinfo); - if (rc) - PRINT_WARN("SNMP command failed on %s: (0x%x)\n", - QETH_CARD_IFNAME(card), rc); - else { - if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) - rc = -EFAULT; - } - - kfree(ureq); - kfree(qinfo.udata); - return rc; -} - -static int -qeth_default_setassparms_cb(struct qeth_card *, struct qeth_reply *, - unsigned long); - -static int -qeth_default_setadapterparms_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data); -static int -qeth_send_setassparms(struct qeth_card *, struct qeth_cmd_buffer *, - __u16, long, - int (*reply_cb) - (struct qeth_card *, struct qeth_reply *, unsigned long), - void *reply_param); - -static int -qeth_arp_add_entry(struct qeth_card *card, struct qeth_arp_cache_entry *entry) -{ - struct qeth_cmd_buffer *iob; - char buf[16]; - int tmp; - int rc; - - QETH_DBF_TEXT(trace,3,"arpadent"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_ADD_ENTRY; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan) - return -EOPNOTSUPP; - if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_ADD_ENTRY, - sizeof(struct qeth_arp_cache_entry), - QETH_PROT_IPV4); - rc = qeth_send_setassparms(card, iob, - sizeof(struct qeth_arp_cache_entry), - (unsigned long) entry, - qeth_default_setassparms_cb, NULL); - if (rc) { - tmp = rc; - qeth_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not add ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; -} - -static int -qeth_arp_remove_entry(struct qeth_card *card, struct qeth_arp_cache_entry *entry) -{ - struct qeth_cmd_buffer *iob; - char buf[16] = {0, }; - int tmp; - int rc; - - QETH_DBF_TEXT(trace,3,"arprment"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan) - return -EOPNOTSUPP; - if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - memcpy(buf, entry, 12); - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_REMOVE_ENTRY, - 12, - QETH_PROT_IPV4); - rc = qeth_send_setassparms(card, iob, - 12, (unsigned long)buf, - qeth_default_setassparms_cb, NULL); - if (rc) { - tmp = rc; - memset(buf, 0, 16); - qeth_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not delete ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; -} - -static int -qeth_arp_flush_cache(struct qeth_card *card) -{ - int rc; - int tmp; - - QETH_DBF_TEXT(trace,3,"arpflush"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_FLUSH_CACHE; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD)) - return -EOPNOTSUPP; - if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); - if (rc){ - tmp = rc; - PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n", - QETH_CARD_IFNAME(card), qeth_arp_get_error_cause(&rc), - tmp, tmp); - } - return rc; -} - -static int -qeth_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - struct qeth_arp_cache_entry arp_entry; - struct mii_ioctl_data *mii_data; - int rc = 0; - - if (!card) - return -ENODEV; - - if ((card->state != CARD_STATE_UP) && - (card->state != CARD_STATE_SOFTSETUP)) - return -ENODEV; - - if (card->info.type == QETH_CARD_TYPE_OSN) - return -EPERM; - - switch (cmd){ - case SIOC_QETH_ARP_SET_NO_ENTRIES: - if ( !capable(CAP_NET_ADMIN) || - (card->options.layer2) ) { - rc = -EPERM; - break; - } - rc = qeth_arp_set_no_entries(card, rq->ifr_ifru.ifru_ivalue); - break; - case SIOC_QETH_ARP_QUERY_INFO: - if ( !capable(CAP_NET_ADMIN) || - (card->options.layer2) ) { - rc = -EPERM; - break; - } - rc = qeth_arp_query(card, rq->ifr_ifru.ifru_data); - break; - case SIOC_QETH_ARP_ADD_ENTRY: - if ( !capable(CAP_NET_ADMIN) || - (card->options.layer2) ) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_arp_add_entry(card, &arp_entry); - break; - case SIOC_QETH_ARP_REMOVE_ENTRY: - if ( !capable(CAP_NET_ADMIN) || - (card->options.layer2) ) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_arp_remove_entry(card, &arp_entry); - break; - case SIOC_QETH_ARP_FLUSH_CACHE: - if ( !capable(CAP_NET_ADMIN) || - (card->options.layer2) ) { - rc = -EPERM; - break; - } - rc = qeth_arp_flush_cache(card); - break; - case SIOC_QETH_ADP_SET_SNMP_CONTROL: - rc = qeth_snmp_command(card, rq->ifr_ifru.ifru_data); - break; - case SIOC_QETH_GET_CARD_TYPE: - if ((card->info.type == QETH_CARD_TYPE_OSAE) && - !card->info.guestlan) - return 1; - return 0; - break; - case SIOCGMIIPHY: - mii_data = if_mii(rq); - mii_data->phy_id = 0; - break; - case SIOCGMIIREG: - mii_data = if_mii(rq); - if (mii_data->phy_id != 0) - rc = -EINVAL; - else - mii_data->val_out = qeth_mdio_read(dev,mii_data->phy_id, - mii_data->reg_num); - break; - default: - rc = -EOPNOTSUPP; - } - if (rc) - QETH_DBF_TEXT_(trace, 2, "ioce%d", rc); - return rc; -} - -static struct net_device_stats * -qeth_get_stats(struct net_device *dev) -{ - struct qeth_card *card; - - card = (struct qeth_card *) (dev->priv); - - QETH_DBF_TEXT(trace,5,"getstat"); - - return &card->stats; -} - -static int -qeth_change_mtu(struct net_device *dev, int new_mtu) -{ - struct qeth_card *card; - char dbf_text[15]; - - card = (struct qeth_card *) (dev->priv); - - QETH_DBF_TEXT(trace,4,"chgmtu"); - sprintf(dbf_text, "%8x", new_mtu); - QETH_DBF_TEXT(trace,4,dbf_text); - - if (new_mtu < 64) - return -EINVAL; - if (new_mtu > 65535) - return -EINVAL; - if ((!qeth_is_supported(card,IPA_IP_FRAGMENTATION)) && - (!qeth_mtu_is_valid(card, new_mtu))) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - -#ifdef CONFIG_QETH_VLAN -static void -qeth_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -{ - struct qeth_card *card; - unsigned long flags; - - QETH_DBF_TEXT(trace,4,"vlanreg"); - - card = (struct qeth_card *) dev->priv; - spin_lock_irqsave(&card->vlanlock, flags); - card->vlangrp = grp; - spin_unlock_irqrestore(&card->vlanlock, flags); -} - -static void -qeth_free_vlan_buffer(struct qeth_card *card, struct qeth_qdio_out_buffer *buf, - unsigned short vid) -{ - int i; - struct sk_buff *skb; - struct sk_buff_head tmp_list; - - skb_queue_head_init(&tmp_list); - lockdep_set_class(&tmp_list.lock, &qdio_out_skb_queue_key); - for(i = 0; i < QETH_MAX_BUFFER_ELEMENTS(card); ++i){ - while ((skb = skb_dequeue(&buf->skb_list))){ - if (vlan_tx_tag_present(skb) && - (vlan_tx_tag_get(skb) == vid)) { - atomic_dec(&skb->users); - dev_kfree_skb(skb); - } else - skb_queue_tail(&tmp_list, skb); - } - } - while ((skb = skb_dequeue(&tmp_list))) - skb_queue_tail(&buf->skb_list, skb); -} - -static void -qeth_free_vlan_skbs(struct qeth_card *card, unsigned short vid) -{ - int i, j; - - QETH_DBF_TEXT(trace, 4, "frvlskbs"); - for (i = 0; i < card->qdio.no_out_queues; ++i){ - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) - qeth_free_vlan_buffer(card, &card->qdio. - out_qs[i]->bufs[j], vid); - } -} - -static void -qeth_free_vlan_addresses4(struct qeth_card *card, unsigned short vid) -{ - struct in_device *in_dev; - struct in_ifaddr *ifa; - struct qeth_ipaddr *addr; - - QETH_DBF_TEXT(trace, 4, "frvaddr4"); - - rcu_read_lock(); - in_dev = __in_dev_get_rcu(vlan_group_get_device(card->vlangrp, vid)); - if (!in_dev) - goto out; - for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) { - addr = qeth_get_addr_buffer(QETH_PROT_IPV4); - if (addr){ - addr->u.a4.addr = ifa->ifa_address; - addr->u.a4.mask = ifa->ifa_mask; - addr->type = QETH_IP_TYPE_NORMAL; - if (!qeth_delete_ip(card, addr)) - kfree(addr); - } - } -out: - rcu_read_unlock(); -} - -static void -qeth_free_vlan_addresses6(struct qeth_card *card, unsigned short vid) -{ -#ifdef CONFIG_QETH_IPV6 - struct inet6_dev *in6_dev; - struct inet6_ifaddr *ifa; - struct qeth_ipaddr *addr; - - QETH_DBF_TEXT(trace, 4, "frvaddr6"); - - in6_dev = in6_dev_get(vlan_group_get_device(card->vlangrp, vid)); - if (!in6_dev) - return; - for (ifa = in6_dev->addr_list; ifa; ifa = ifa->lst_next){ - addr = qeth_get_addr_buffer(QETH_PROT_IPV6); - if (addr){ - memcpy(&addr->u.a6.addr, &ifa->addr, - sizeof(struct in6_addr)); - addr->u.a6.pfxlen = ifa->prefix_len; - addr->type = QETH_IP_TYPE_NORMAL; - if (!qeth_delete_ip(card, addr)) - kfree(addr); - } - } - in6_dev_put(in6_dev); -#endif /* CONFIG_QETH_IPV6 */ -} - -static void -qeth_free_vlan_addresses(struct qeth_card *card, unsigned short vid) -{ - if (card->options.layer2 || !card->vlangrp) - return; - qeth_free_vlan_addresses4(card, vid); - qeth_free_vlan_addresses6(card, vid); -} - -static int -qeth_layer2_send_setdelvlan_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace, 2, "L2sdvcb"); - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code) { - PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. " - "Continuing\n",cmd->data.setdelvlan.vlan_id, - QETH_CARD_IFNAME(card), cmd->hdr.return_code); - QETH_DBF_TEXT_(trace, 2, "L2VL%4x", cmd->hdr.command); - QETH_DBF_TEXT_(trace, 2, "L2%s", CARD_BUS_ID(card)); - QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code); - } - return 0; -} - -static int -qeth_layer2_send_setdelvlan(struct qeth_card *card, __u16 i, - enum qeth_ipa_cmds ipacmd) -{ - struct qeth_ipa_cmd *cmd; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT_(trace, 4, "L2sdv%x",ipacmd); - iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setdelvlan.vlan_id = i; - return qeth_send_ipa_cmd(card, iob, - qeth_layer2_send_setdelvlan_cb, NULL); -} - -static void -qeth_layer2_process_vlans(struct qeth_card *card, int clear) -{ - unsigned short i; - - QETH_DBF_TEXT(trace, 3, "L2prcvln"); - - if (!card->vlangrp) - return; - for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { - if (vlan_group_get_device(card->vlangrp, i) == NULL) - continue; - if (clear) - qeth_layer2_send_setdelvlan(card, i, IPA_CMD_DELVLAN); - else - qeth_layer2_send_setdelvlan(card, i, IPA_CMD_SETVLAN); - } -} - -/*add_vid is layer 2 used only ....*/ -static void -qeth_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) -{ - struct qeth_card *card; - - QETH_DBF_TEXT_(trace, 4, "aid:%d", vid); - - card = (struct qeth_card *) dev->priv; - if (!card->options.layer2) - return; - qeth_layer2_send_setdelvlan(card, vid, IPA_CMD_SETVLAN); -} - -/*... kill_vid used for both modes*/ -static void -qeth_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) -{ - struct qeth_card *card; - unsigned long flags; - - QETH_DBF_TEXT_(trace, 4, "kid:%d", vid); - - card = (struct qeth_card *) dev->priv; - /* free all skbs for the vlan device */ - qeth_free_vlan_skbs(card, vid); - spin_lock_irqsave(&card->vlanlock, flags); - /* unregister IP addresses of vlan device */ - qeth_free_vlan_addresses(card, vid); - vlan_group_set_device(card->vlangrp, vid, NULL); - spin_unlock_irqrestore(&card->vlanlock, flags); - if (card->options.layer2) - qeth_layer2_send_setdelvlan(card, vid, IPA_CMD_DELVLAN); - qeth_set_multicast_list(card->dev); -} -#endif -/** - * Examine hardware response to SET_PROMISC_MODE - */ -static int -qeth_setadp_promisc_mode_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - struct qeth_ipacmd_setadpparms *setparms; - - QETH_DBF_TEXT(trace,4,"prmadpcb"); - - cmd = (struct qeth_ipa_cmd *) data; - setparms = &(cmd->data.setadapterparms); - - qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd); - if (cmd->hdr.return_code) { - QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code); - setparms->data.mode = SET_PROMISC_MODE_OFF; - } - card->info.promisc_mode = setparms->data.mode; - return 0; -} -/* - * Set promiscuous mode (on or off) (SET_PROMISC_MODE command) - */ -static void -qeth_setadp_promisc_mode(struct qeth_card *card) -{ - enum qeth_ipa_promisc_modes mode; - struct net_device *dev = card->dev; - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace, 4, "setprom"); - - if (((dev->flags & IFF_PROMISC) && - (card->info.promisc_mode == SET_PROMISC_MODE_ON)) || - (!(dev->flags & IFF_PROMISC) && - (card->info.promisc_mode == SET_PROMISC_MODE_OFF))) - return; - mode = SET_PROMISC_MODE_OFF; - if (dev->flags & IFF_PROMISC) - mode = SET_PROMISC_MODE_ON; - QETH_DBF_TEXT_(trace, 4, "mode:%x", mode); - - iob = qeth_get_adapter_cmd(card, IPA_SETADP_SET_PROMISC_MODE, - sizeof(struct qeth_ipacmd_setadpparms)); - cmd = (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE); - cmd->data.setadapterparms.data.mode = mode; - qeth_send_ipa_cmd(card, iob, qeth_setadp_promisc_mode_cb, NULL); -} - -/** - * set multicast address on card - */ -static void -qeth_set_multicast_list(struct net_device *dev) -{ - struct qeth_card *card = (struct qeth_card *) dev->priv; - - if (card->info.type == QETH_CARD_TYPE_OSN) - return ; - - QETH_DBF_TEXT(trace, 3, "setmulti"); - qeth_delete_mc_addresses(card); - if (card->options.layer2) { - qeth_layer2_add_multicast(card); - goto out; - } - qeth_add_multicast_ipv4(card); -#ifdef CONFIG_QETH_IPV6 - qeth_add_multicast_ipv6(card); -#endif -out: - qeth_set_ip_addr_list(card); - if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) - return; - qeth_setadp_promisc_mode(card); -} - -static int -qeth_neigh_setup(struct net_device *dev, struct neigh_parms *np) -{ - return 0; -} - -static void -qeth_get_mac_for_ipm(__u32 ipm, char *mac, struct net_device *dev) -{ - if (dev->type == ARPHRD_IEEE802_TR) - ip_tr_mc_map(ipm, mac); - else - ip_eth_mc_map(ipm, mac); -} - -static struct qeth_ipaddr * -qeth_get_addr_buffer(enum qeth_prot_versions prot) -{ - struct qeth_ipaddr *addr; - - addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC); - if (addr == NULL) { - PRINT_WARN("Not enough memory to add address\n"); - return NULL; - } - addr->type = QETH_IP_TYPE_NORMAL; - addr->proto = prot; - return addr; -} - -int -qeth_osn_assist(struct net_device *dev, - void *data, - int data_len) -{ - struct qeth_cmd_buffer *iob; - struct qeth_card *card; - int rc; - - QETH_DBF_TEXT(trace, 2, "osnsdmc"); - if (!dev) - return -ENODEV; - card = (struct qeth_card *)dev->priv; - if (!card) - return -ENODEV; - if ((card->state != CARD_STATE_UP) && - (card->state != CARD_STATE_SOFTSETUP)) - return -ENODEV; - iob = qeth_wait_for_buffer(&card->write); - memcpy(iob->data+IPA_PDU_HEADER_SIZE, data, data_len); - rc = qeth_osn_send_ipa_cmd(card, iob, data_len); - return rc; -} - -static struct net_device * -qeth_netdev_by_devno(unsigned char *read_dev_no) -{ - struct qeth_card *card; - struct net_device *ndev; - unsigned char *readno; - __u16 temp_dev_no, card_dev_no; - char *endp; - unsigned long flags; - - ndev = NULL; - memcpy(&temp_dev_no, read_dev_no, 2); - read_lock_irqsave(&qeth_card_list.rwlock, flags); - list_for_each_entry(card, &qeth_card_list.list, list) { - readno = CARD_RDEV_ID(card); - readno += (strlen(readno) - 4); - card_dev_no = simple_strtoul(readno, &endp, 16); - if (card_dev_no == temp_dev_no) { - ndev = card->dev; - break; - } - } - read_unlock_irqrestore(&qeth_card_list.rwlock, flags); - return ndev; -} - -int -qeth_osn_register(unsigned char *read_dev_no, - struct net_device **dev, - int (*assist_cb)(struct net_device *, void *), - int (*data_cb)(struct sk_buff *)) -{ - struct qeth_card * card; - - QETH_DBF_TEXT(trace, 2, "osnreg"); - *dev = qeth_netdev_by_devno(read_dev_no); - if (*dev == NULL) - return -ENODEV; - card = (struct qeth_card *)(*dev)->priv; - if (!card) - return -ENODEV; - if ((assist_cb == NULL) || (data_cb == NULL)) - return -EINVAL; - card->osn_info.assist_cb = assist_cb; - card->osn_info.data_cb = data_cb; - return 0; -} - -void -qeth_osn_deregister(struct net_device * dev) -{ - struct qeth_card *card; - - QETH_DBF_TEXT(trace, 2, "osndereg"); - if (!dev) - return; - card = (struct qeth_card *)dev->priv; - if (!card) - return; - card->osn_info.assist_cb = NULL; - card->osn_info.data_cb = NULL; - return; -} - -static void -qeth_delete_mc_addresses(struct qeth_card *card) -{ - struct qeth_ipaddr *iptodo; - unsigned long flags; - - QETH_DBF_TEXT(trace,4,"delmc"); - iptodo = qeth_get_addr_buffer(QETH_PROT_IPV4); - if (!iptodo) { - QETH_DBF_TEXT(trace, 2, "dmcnomem"); - return; - } - iptodo->type = QETH_IP_TYPE_DEL_ALL_MC; - spin_lock_irqsave(&card->ip_lock, flags); - if (!__qeth_insert_ip_todo(card, iptodo, 0)) - kfree(iptodo); - spin_unlock_irqrestore(&card->ip_lock, flags); -} - -static void -qeth_add_mc(struct qeth_card *card, struct in_device *in4_dev) -{ - struct qeth_ipaddr *ipm; - struct ip_mc_list *im4; - char buf[MAX_ADDR_LEN]; - - QETH_DBF_TEXT(trace,4,"addmc"); - for (im4 = in4_dev->mc_list; im4; im4 = im4->next) { - qeth_get_mac_for_ipm(im4->multiaddr, buf, in4_dev->dev); - ipm = qeth_get_addr_buffer(QETH_PROT_IPV4); - if (!ipm) - continue; - ipm->u.a4.addr = im4->multiaddr; - memcpy(ipm->mac,buf,OSA_ADDR_LEN); - ipm->is_multicast = 1; - if (!qeth_add_ip(card,ipm)) - kfree(ipm); - } -} - -static inline void -qeth_add_vlan_mc(struct qeth_card *card) -{ -#ifdef CONFIG_QETH_VLAN - struct in_device *in_dev; - struct vlan_group *vg; - int i; - - QETH_DBF_TEXT(trace,4,"addmcvl"); - if ( ((card->options.layer2 == 0) && - (!qeth_is_supported(card,IPA_FULL_VLAN))) || - (card->vlangrp == NULL) ) - return ; - - vg = card->vlangrp; - for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { - struct net_device *netdev = vlan_group_get_device(vg, i); - if (netdev == NULL || - !(netdev->flags & IFF_UP)) - continue; - in_dev = in_dev_get(netdev); - if (!in_dev) - continue; - read_lock(&in_dev->mc_list_lock); - qeth_add_mc(card,in_dev); - read_unlock(&in_dev->mc_list_lock); - in_dev_put(in_dev); - } -#endif -} - -static void -qeth_add_multicast_ipv4(struct qeth_card *card) -{ - struct in_device *in4_dev; - - QETH_DBF_TEXT(trace,4,"chkmcv4"); - in4_dev = in_dev_get(card->dev); - if (in4_dev == NULL) - return; - read_lock(&in4_dev->mc_list_lock); - qeth_add_mc(card, in4_dev); - qeth_add_vlan_mc(card); - read_unlock(&in4_dev->mc_list_lock); - in_dev_put(in4_dev); -} - -static void -qeth_layer2_add_multicast(struct qeth_card *card) -{ - struct qeth_ipaddr *ipm; - struct dev_mc_list *dm; - - QETH_DBF_TEXT(trace,4,"L2addmc"); - for (dm = card->dev->mc_list; dm; dm = dm->next) { - ipm = qeth_get_addr_buffer(QETH_PROT_IPV4); - if (!ipm) - continue; - memcpy(ipm->mac,dm->dmi_addr,MAX_ADDR_LEN); - ipm->is_multicast = 1; - if (!qeth_add_ip(card, ipm)) - kfree(ipm); - } -} - -#ifdef CONFIG_QETH_IPV6 -static void -qeth_add_mc6(struct qeth_card *card, struct inet6_dev *in6_dev) -{ - struct qeth_ipaddr *ipm; - struct ifmcaddr6 *im6; - char buf[MAX_ADDR_LEN]; - - QETH_DBF_TEXT(trace,4,"addmc6"); - for (im6 = in6_dev->mc_list; im6 != NULL; im6 = im6->next) { - ndisc_mc_map(&im6->mca_addr, buf, in6_dev->dev, 0); - ipm = qeth_get_addr_buffer(QETH_PROT_IPV6); - if (!ipm) - continue; - ipm->is_multicast = 1; - memcpy(ipm->mac,buf,OSA_ADDR_LEN); - memcpy(&ipm->u.a6.addr,&im6->mca_addr.s6_addr, - sizeof(struct in6_addr)); - if (!qeth_add_ip(card,ipm)) - kfree(ipm); - } -} - -static inline void -qeth_add_vlan_mc6(struct qeth_card *card) -{ -#ifdef CONFIG_QETH_VLAN - struct inet6_dev *in_dev; - struct vlan_group *vg; - int i; - - QETH_DBF_TEXT(trace,4,"admc6vl"); - if ( ((card->options.layer2 == 0) && - (!qeth_is_supported(card,IPA_FULL_VLAN))) || - (card->vlangrp == NULL)) - return ; - - vg = card->vlangrp; - for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { - struct net_device *netdev = vlan_group_get_device(vg, i); - if (netdev == NULL || - !(netdev->flags & IFF_UP)) - continue; - in_dev = in6_dev_get(netdev); - if (!in_dev) - continue; - read_lock_bh(&in_dev->lock); - qeth_add_mc6(card,in_dev); - read_unlock_bh(&in_dev->lock); - in6_dev_put(in_dev); - } -#endif /* CONFIG_QETH_VLAN */ -} - -static void -qeth_add_multicast_ipv6(struct qeth_card *card) -{ - struct inet6_dev *in6_dev; - - QETH_DBF_TEXT(trace,4,"chkmcv6"); - if (!qeth_is_supported(card, IPA_IPV6)) - return ; - in6_dev = in6_dev_get(card->dev); - if (in6_dev == NULL) - return; - read_lock_bh(&in6_dev->lock); - qeth_add_mc6(card, in6_dev); - qeth_add_vlan_mc6(card); - read_unlock_bh(&in6_dev->lock); - in6_dev_put(in6_dev); -} -#endif /* CONFIG_QETH_IPV6 */ - -static int -qeth_layer2_send_setdelmac(struct qeth_card *card, __u8 *mac, - enum qeth_ipa_cmds ipacmd, - int (*reply_cb) (struct qeth_card *, - struct qeth_reply*, - unsigned long)) -{ - struct qeth_ipa_cmd *cmd; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace, 2, "L2sdmac"); - iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setdelmac.mac_length = OSA_ADDR_LEN; - memcpy(&cmd->data.setdelmac.mac, mac, OSA_ADDR_LEN); - return qeth_send_ipa_cmd(card, iob, reply_cb, NULL); -} - -static int -qeth_layer2_send_setgroupmac_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - __u8 *mac; - - QETH_DBF_TEXT(trace, 2, "L2Sgmacb"); - cmd = (struct qeth_ipa_cmd *) data; - mac = &cmd->data.setdelmac.mac[0]; - /* MAC already registered, needed in couple/uncouple case */ - if (cmd->hdr.return_code == 0x2005) { - PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \ - "already existing on %s \n", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], - QETH_CARD_IFNAME(card)); - cmd->hdr.return_code = 0; - } - if (cmd->hdr.return_code) - PRINT_ERR("Could not set group MAC " \ - "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], - QETH_CARD_IFNAME(card),cmd->hdr.return_code); - return 0; -} - -static int -qeth_layer2_send_setgroupmac(struct qeth_card *card, __u8 *mac) -{ - QETH_DBF_TEXT(trace, 2, "L2Sgmac"); - return qeth_layer2_send_setdelmac(card, mac, IPA_CMD_SETGMAC, - qeth_layer2_send_setgroupmac_cb); -} - -static int -qeth_layer2_send_delgroupmac_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - __u8 *mac; - - QETH_DBF_TEXT(trace, 2, "L2Dgmacb"); - cmd = (struct qeth_ipa_cmd *) data; - mac = &cmd->data.setdelmac.mac[0]; - if (cmd->hdr.return_code) - PRINT_ERR("Could not delete group MAC " \ - "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], - QETH_CARD_IFNAME(card), cmd->hdr.return_code); - return 0; -} - -static int -qeth_layer2_send_delgroupmac(struct qeth_card *card, __u8 *mac) -{ - QETH_DBF_TEXT(trace, 2, "L2Dgmac"); - return qeth_layer2_send_setdelmac(card, mac, IPA_CMD_DELGMAC, - qeth_layer2_send_delgroupmac_cb); -} - -static int -qeth_layer2_send_setmac_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace, 2, "L2Smaccb"); - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code) { - QETH_DBF_TEXT_(trace, 2, "L2er%x", cmd->hdr.return_code); - card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; - cmd->hdr.return_code = -EIO; - } else { - card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED; - memcpy(card->dev->dev_addr,cmd->data.setdelmac.mac, - OSA_ADDR_LEN); - PRINT_INFO("MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " - "successfully registered on device %s\n", - card->dev->dev_addr[0], card->dev->dev_addr[1], - card->dev->dev_addr[2], card->dev->dev_addr[3], - card->dev->dev_addr[4], card->dev->dev_addr[5], - card->dev->name); - } - return 0; -} - -static int -qeth_layer2_send_setmac(struct qeth_card *card, __u8 *mac) -{ - QETH_DBF_TEXT(trace, 2, "L2Setmac"); - return qeth_layer2_send_setdelmac(card, mac, IPA_CMD_SETVMAC, - qeth_layer2_send_setmac_cb); -} - -static int -qeth_layer2_send_delmac_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace, 2, "L2Dmaccb"); - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code) { - QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code); - cmd->hdr.return_code = -EIO; - return 0; - } - card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; - - return 0; -} -static int -qeth_layer2_send_delmac(struct qeth_card *card, __u8 *mac) -{ - QETH_DBF_TEXT(trace, 2, "L2Delmac"); - if (!(card->info.mac_bits & QETH_LAYER2_MAC_REGISTERED)) - return 0; - return qeth_layer2_send_setdelmac(card, mac, IPA_CMD_DELVMAC, - qeth_layer2_send_delmac_cb); -} - -static int -qeth_layer2_set_mac_address(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - struct qeth_card *card; - int rc = 0; - - QETH_DBF_TEXT(trace, 3, "setmac"); - - if (qeth_verify_dev(dev) != QETH_REAL_CARD) { - QETH_DBF_TEXT(trace, 3, "setmcINV"); - return -EOPNOTSUPP; - } - card = (struct qeth_card *) dev->priv; - - if (!card->options.layer2) { - PRINT_WARN("Setting MAC address on %s is not supported " - "in Layer 3 mode.\n", dev->name); - QETH_DBF_TEXT(trace, 3, "setmcLY3"); - return -EOPNOTSUPP; - } - if (card->info.type == QETH_CARD_TYPE_OSN) { - PRINT_WARN("Setting MAC address on %s is not supported.\n", - dev->name); - QETH_DBF_TEXT(trace, 3, "setmcOSN"); - return -EOPNOTSUPP; - } - QETH_DBF_TEXT_(trace, 3, "%s", CARD_BUS_ID(card)); - QETH_DBF_HEX(trace, 3, addr->sa_data, OSA_ADDR_LEN); - rc = qeth_layer2_send_delmac(card, &card->dev->dev_addr[0]); - if (!rc) - rc = qeth_layer2_send_setmac(card, addr->sa_data); - return rc; -} - -static void -qeth_fill_ipacmd_header(struct qeth_card *card, struct qeth_ipa_cmd *cmd, - __u8 command, enum qeth_prot_versions prot) -{ - memset(cmd, 0, sizeof (struct qeth_ipa_cmd)); - cmd->hdr.command = command; - cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST; - cmd->hdr.seqno = card->seqno.ipa; - cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type); - cmd->hdr.rel_adapter_no = (__u8) card->info.portno; - if (card->options.layer2) - cmd->hdr.prim_version_no = 2; - else - cmd->hdr.prim_version_no = 1; - cmd->hdr.param_count = 1; - cmd->hdr.prot_version = prot; - cmd->hdr.ipa_supported = 0; - cmd->hdr.ipa_enabled = 0; -} - -static struct qeth_cmd_buffer * -qeth_get_ipacmd_buffer(struct qeth_card *card, enum qeth_ipa_cmds ipacmd, - enum qeth_prot_versions prot) -{ - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - iob = qeth_wait_for_buffer(&card->write); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - qeth_fill_ipacmd_header(card, cmd, ipacmd, prot); - - return iob; -} - -static int -qeth_send_setdelmc(struct qeth_card *card, struct qeth_ipaddr *addr, int ipacmd) -{ - int rc; - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"setdelmc"); - - iob = qeth_get_ipacmd_buffer(card, ipacmd, addr->proto); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - memcpy(&cmd->data.setdelipm.mac,addr->mac, OSA_ADDR_LEN); - if (addr->proto == QETH_PROT_IPV6) - memcpy(cmd->data.setdelipm.ip6, &addr->u.a6.addr, - sizeof(struct in6_addr)); - else - memcpy(&cmd->data.setdelipm.ip4, &addr->u.a4.addr,4); - - rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); - - return rc; -} -static void -qeth_fill_netmask(u8 *netmask, unsigned int len) -{ - int i,j; - for (i=0;i<16;i++) { - j=(len)-(i*8); - if (j >= 8) - netmask[i] = 0xff; - else if (j > 0) - netmask[i] = (u8)(0xFF00>>j); - else - netmask[i] = 0; - } -} - -static int -qeth_send_setdelip(struct qeth_card *card, struct qeth_ipaddr *addr, - int ipacmd, unsigned int flags) -{ - int rc; - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - __u8 netmask[16]; - - QETH_DBF_TEXT(trace,4,"setdelip"); - QETH_DBF_TEXT_(trace,4,"flags%02X", flags); - - iob = qeth_get_ipacmd_buffer(card, ipacmd, addr->proto); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - if (addr->proto == QETH_PROT_IPV6) { - memcpy(cmd->data.setdelip6.ip_addr, &addr->u.a6.addr, - sizeof(struct in6_addr)); - qeth_fill_netmask(netmask,addr->u.a6.pfxlen); - memcpy(cmd->data.setdelip6.mask, netmask, - sizeof(struct in6_addr)); - cmd->data.setdelip6.flags = flags; - } else { - memcpy(cmd->data.setdelip4.ip_addr, &addr->u.a4.addr, 4); - memcpy(cmd->data.setdelip4.mask, &addr->u.a4.mask, 4); - cmd->data.setdelip4.flags = flags; - } - - rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); - - return rc; -} - -static int -qeth_layer2_register_addr_entry(struct qeth_card *card, - struct qeth_ipaddr *addr) -{ - if (!addr->is_multicast) - return 0; - QETH_DBF_TEXT(trace, 2, "setgmac"); - QETH_DBF_HEX(trace,3,&addr->mac[0],OSA_ADDR_LEN); - return qeth_layer2_send_setgroupmac(card, &addr->mac[0]); -} - -static int -qeth_layer2_deregister_addr_entry(struct qeth_card *card, - struct qeth_ipaddr *addr) -{ - if (!addr->is_multicast) - return 0; - QETH_DBF_TEXT(trace, 2, "delgmac"); - QETH_DBF_HEX(trace,3,&addr->mac[0],OSA_ADDR_LEN); - return qeth_layer2_send_delgroupmac(card, &addr->mac[0]); -} - -static int -qeth_layer3_register_addr_entry(struct qeth_card *card, - struct qeth_ipaddr *addr) -{ - char buf[50]; - int rc; - int cnt = 3; - - if (addr->proto == QETH_PROT_IPV4) { - QETH_DBF_TEXT(trace, 2,"setaddr4"); - QETH_DBF_HEX(trace, 3, &addr->u.a4.addr, sizeof(int)); - } else if (addr->proto == QETH_PROT_IPV6) { - QETH_DBF_TEXT(trace, 2, "setaddr6"); - QETH_DBF_HEX(trace,3,&addr->u.a6.addr,8); - QETH_DBF_HEX(trace,3,((char *)&addr->u.a6.addr)+8,8); - } else { - QETH_DBF_TEXT(trace, 2, "setaddr?"); - QETH_DBF_HEX(trace, 3, addr, sizeof(struct qeth_ipaddr)); - } - do { - if (addr->is_multicast) - rc = qeth_send_setdelmc(card, addr, IPA_CMD_SETIPM); - else - rc = qeth_send_setdelip(card, addr, IPA_CMD_SETIP, - addr->set_flags); - if (rc) - QETH_DBF_TEXT(trace, 2, "failed"); - } while ((--cnt > 0) && rc); - if (rc){ - QETH_DBF_TEXT(trace, 2, "FAILED"); - qeth_ipaddr_to_string(addr->proto, (u8 *)&addr->u, buf); - PRINT_WARN("Could not register IP address %s (rc=0x%x/%d)\n", - buf, rc, rc); - } - return rc; -} - -static int -qeth_layer3_deregister_addr_entry(struct qeth_card *card, - struct qeth_ipaddr *addr) -{ - //char buf[50]; - int rc; - - if (addr->proto == QETH_PROT_IPV4) { - QETH_DBF_TEXT(trace, 2,"deladdr4"); - QETH_DBF_HEX(trace, 3, &addr->u.a4.addr, sizeof(int)); - } else if (addr->proto == QETH_PROT_IPV6) { - QETH_DBF_TEXT(trace, 2, "deladdr6"); - QETH_DBF_HEX(trace,3,&addr->u.a6.addr,8); - QETH_DBF_HEX(trace,3,((char *)&addr->u.a6.addr)+8,8); - } else { - QETH_DBF_TEXT(trace, 2, "deladdr?"); - QETH_DBF_HEX(trace, 3, addr, sizeof(struct qeth_ipaddr)); - } - if (addr->is_multicast) - rc = qeth_send_setdelmc(card, addr, IPA_CMD_DELIPM); - else - rc = qeth_send_setdelip(card, addr, IPA_CMD_DELIP, - addr->del_flags); - if (rc) { - QETH_DBF_TEXT(trace, 2, "failed"); - /* TODO: re-activate this warning as soon as we have a - * clean mirco code - qeth_ipaddr_to_string(addr->proto, (u8 *)&addr->u, buf); - PRINT_WARN("Could not deregister IP address %s (rc=%x)\n", - buf, rc); - */ - } - return rc; -} - -static int -qeth_register_addr_entry(struct qeth_card *card, struct qeth_ipaddr *addr) -{ - if (card->options.layer2) - return qeth_layer2_register_addr_entry(card, addr); - - return qeth_layer3_register_addr_entry(card, addr); -} - -static int -qeth_deregister_addr_entry(struct qeth_card *card, struct qeth_ipaddr *addr) -{ - if (card->options.layer2) - return qeth_layer2_deregister_addr_entry(card, addr); - - return qeth_layer3_deregister_addr_entry(card, addr); -} - -static u32 -qeth_ethtool_get_tx_csum(struct net_device *dev) -{ - return (dev->features & NETIF_F_HW_CSUM) != 0; -} - -static int -qeth_ethtool_set_tx_csum(struct net_device *dev, u32 data) -{ - if (data) - dev->features |= NETIF_F_HW_CSUM; - else - dev->features &= ~NETIF_F_HW_CSUM; - - return 0; -} - -static u32 -qeth_ethtool_get_rx_csum(struct net_device *dev) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - return (card->options.checksum_type == HW_CHECKSUMMING); -} - -static int -qeth_ethtool_set_rx_csum(struct net_device *dev, u32 data) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - if (data) - card->options.checksum_type = HW_CHECKSUMMING; - else - card->options.checksum_type = SW_CHECKSUMMING; - return 0; -} - -static u32 -qeth_ethtool_get_sg(struct net_device *dev) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - return ((card->options.large_send != QETH_LARGE_SEND_NO) && - (dev->features & NETIF_F_SG)); -} - -static int -qeth_ethtool_set_sg(struct net_device *dev, u32 data) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - if (data) { - if (card->options.large_send != QETH_LARGE_SEND_NO) - dev->features |= NETIF_F_SG; - else { - dev->features &= ~NETIF_F_SG; - return -EINVAL; - } - } else - dev->features &= ~NETIF_F_SG; - return 0; -} - -static u32 -qeth_ethtool_get_tso(struct net_device *dev) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - return ((card->options.large_send != QETH_LARGE_SEND_NO) && - (dev->features & NETIF_F_TSO)); -} - -static int -qeth_ethtool_set_tso(struct net_device *dev, u32 data) -{ - struct qeth_card *card = (struct qeth_card *)dev->priv; - - if (data) { - if (card->options.large_send != QETH_LARGE_SEND_NO) - dev->features |= NETIF_F_TSO; - else { - dev->features &= ~NETIF_F_TSO; - return -EINVAL; - } - } else - dev->features &= ~NETIF_F_TSO; - return 0; -} - -static struct ethtool_ops qeth_ethtool_ops = { - .get_tx_csum = qeth_ethtool_get_tx_csum, - .set_tx_csum = qeth_ethtool_set_tx_csum, - .get_rx_csum = qeth_ethtool_get_rx_csum, - .set_rx_csum = qeth_ethtool_set_rx_csum, - .get_sg = qeth_ethtool_get_sg, - .set_sg = qeth_ethtool_set_sg, - .get_tso = qeth_ethtool_get_tso, - .set_tso = qeth_ethtool_set_tso, -}; - -static int -qeth_hard_header_parse(const struct sk_buff *skb, unsigned char *haddr) -{ - const struct qeth_card *card; - const struct ethhdr *eth; - struct net_device *dev = skb->dev; - - if (dev->type != ARPHRD_IEEE802_TR) - return 0; - - card = qeth_get_card_from_dev(dev); - if (card->options.layer2) - goto haveheader; -#ifdef CONFIG_QETH_IPV6 - /* cause of the manipulated arp constructor and the ARP - flag for OSAE devices we have some nasty exceptions */ - if (card->info.type == QETH_CARD_TYPE_OSAE) { - if (!card->options.fake_ll) { - if ((skb->pkt_type==PACKET_OUTGOING) && - (skb->protocol==ETH_P_IPV6)) - goto haveheader; - else - return 0; - } else { - if ((skb->pkt_type==PACKET_OUTGOING) && - (skb->protocol==ETH_P_IP)) - return 0; - else - goto haveheader; - } - } -#endif - if (!card->options.fake_ll) - return 0; -haveheader: - eth = eth_hdr(skb); - memcpy(haddr, eth->h_source, ETH_ALEN); - return ETH_ALEN; -} - -static const struct header_ops qeth_null_ops = { - .parse = qeth_hard_header_parse, -}; - -static int -qeth_netdev_init(struct net_device *dev) -{ - struct qeth_card *card; - - card = (struct qeth_card *) dev->priv; - - QETH_DBF_TEXT(trace,3,"initdev"); - - dev->tx_timeout = &qeth_tx_timeout; - dev->watchdog_timeo = QETH_TX_TIMEOUT; - dev->open = qeth_open; - dev->stop = qeth_stop; - dev->hard_start_xmit = qeth_hard_start_xmit; - dev->do_ioctl = qeth_do_ioctl; - dev->get_stats = qeth_get_stats; - dev->change_mtu = qeth_change_mtu; - dev->neigh_setup = qeth_neigh_setup; - dev->set_multicast_list = qeth_set_multicast_list; -#ifdef CONFIG_QETH_VLAN - dev->vlan_rx_register = qeth_vlan_rx_register; - dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid; - dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid; -#endif - if (qeth_get_netdev_flags(card) & IFF_NOARP) - dev->header_ops = &qeth_null_ops; - -#ifdef CONFIG_QETH_IPV6 - /*IPv6 address autoconfiguration stuff*/ - if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD)) - card->dev->dev_id = card->info.unique_id & 0xffff; -#endif - if (card->options.fake_ll && - (qeth_get_netdev_flags(card) & IFF_NOARP)) - dev->header_ops = &qeth_fake_ops; - - dev->set_mac_address = qeth_layer2_set_mac_address; - dev->flags |= qeth_get_netdev_flags(card); - if ((card->options.fake_broadcast) || - (card->info.broadcast_capable)) - dev->flags |= IFF_BROADCAST; - dev->hard_header_len = - qeth_get_hlen(card->info.link_type) + card->options.add_hhlen; - dev->addr_len = OSA_ADDR_LEN; - dev->mtu = card->info.initial_mtu; - if (card->info.type != QETH_CARD_TYPE_OSN) - SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops); - return 0; -} - -static void -qeth_init_func_level(struct qeth_card *card) -{ - if (card->ipato.enabled) { - if (card->info.type == QETH_CARD_TYPE_IQD) - card->info.func_level = - QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT; - else - card->info.func_level = - QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT; - } else { - if (card->info.type == QETH_CARD_TYPE_IQD) - /*FIXME:why do we have same values for dis and ena for osae??? */ - card->info.func_level = - QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT; - else - card->info.func_level = - QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT; - } -} - -/** - * hardsetup card, initialize MPC and QDIO stuff - */ -static int -qeth_hardsetup_card(struct qeth_card *card) -{ - int retries = 3; - int rc; - - QETH_DBF_TEXT(setup, 2, "hrdsetup"); - - atomic_set(&card->force_alloc_skb, 0); -retry: - if (retries < 3){ - PRINT_WARN("Retrying to do IDX activates.\n"); - ccw_device_set_offline(CARD_DDEV(card)); - ccw_device_set_offline(CARD_WDEV(card)); - ccw_device_set_offline(CARD_RDEV(card)); - ccw_device_set_online(CARD_RDEV(card)); - ccw_device_set_online(CARD_WDEV(card)); - ccw_device_set_online(CARD_DDEV(card)); - } - rc = qeth_qdio_clear_card(card,card->info.type!=QETH_CARD_TYPE_IQD); - if (rc == -ERESTARTSYS) { - QETH_DBF_TEXT(setup, 2, "break1"); - return rc; - } else if (rc) { - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - if (--retries < 0) - goto out; - else - goto retry; - } - if ((rc = qeth_get_unitaddr(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - return rc; - } - qeth_init_tokens(card); - qeth_init_func_level(card); - rc = qeth_idx_activate_channel(&card->read, qeth_idx_read_cb); - if (rc == -ERESTARTSYS) { - QETH_DBF_TEXT(setup, 2, "break2"); - return rc; - } else if (rc) { - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - if (--retries < 0) - goto out; - else - goto retry; - } - rc = qeth_idx_activate_channel(&card->write, qeth_idx_write_cb); - if (rc == -ERESTARTSYS) { - QETH_DBF_TEXT(setup, 2, "break3"); - return rc; - } else if (rc) { - QETH_DBF_TEXT_(setup, 2, "4err%d", rc); - if (--retries < 0) - goto out; - else - goto retry; - } - if ((rc = qeth_mpc_initialize(card))){ - QETH_DBF_TEXT_(setup, 2, "5err%d", rc); - goto out; - } - /*network device will be recovered*/ - if (card->dev) { - card->dev->header_ops = card->orig_header_ops; - if (card->options.fake_ll && - (qeth_get_netdev_flags(card) & IFF_NOARP)) - card->dev->header_ops = &qeth_fake_ops; - return 0; - } - /* at first set_online allocate netdev */ - card->dev = qeth_get_netdevice(card->info.type, - card->info.link_type); - if (!card->dev){ - qeth_qdio_clear_card(card, card->info.type != - QETH_CARD_TYPE_IQD); - rc = -ENODEV; - QETH_DBF_TEXT_(setup, 2, "6err%d", rc); - goto out; - } - card->dev->priv = card; - card->orig_header_ops = card->dev->header_ops; - card->dev->type = qeth_get_arphdr_type(card->info.type, - card->info.link_type); - card->dev->init = qeth_netdev_init; - return 0; -out: - PRINT_ERR("Initialization in hardsetup failed! rc=%d\n", rc); - return rc; -} - -static int -qeth_default_setassparms_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"defadpcb"); - - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code == 0){ - cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code; - if (cmd->hdr.prot_version == QETH_PROT_IPV4) - card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; -#ifdef CONFIG_QETH_IPV6 - if (cmd->hdr.prot_version == QETH_PROT_IPV6) - card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; -#endif - } - if (cmd->data.setassparms.hdr.assist_no == IPA_INBOUND_CHECKSUM && - cmd->data.setassparms.hdr.command_code == IPA_CMD_ASS_START) { - card->info.csum_mask = cmd->data.setassparms.data.flags_32bit; - QETH_DBF_TEXT_(trace, 3, "csum:%d", card->info.csum_mask); - } - return 0; -} - -static int -qeth_default_setadapterparms_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"defadpcb"); - - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code == 0) - cmd->hdr.return_code = cmd->data.setadapterparms.hdr.return_code; - return 0; -} - - - -static int -qeth_query_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,3,"quyadpcb"); - - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->data.setadapterparms.data.query_cmds_supp.lan_type & 0x7f) - card->info.link_type = - cmd->data.setadapterparms.data.query_cmds_supp.lan_type; - card->options.adp.supported_funcs = - cmd->data.setadapterparms.data.query_cmds_supp.supported_cmds; - return qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd); -} - -static int -qeth_query_setadapterparms(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace,3,"queryadp"); - iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_COMMANDS_SUPPORTED, - sizeof(struct qeth_ipacmd_setadpparms)); - rc = qeth_send_ipa_cmd(card, iob, qeth_query_setadapterparms_cb, NULL); - return rc; -} - -static int -qeth_setadpparms_change_macaddr_cb(struct qeth_card *card, - struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"chgmaccb"); - - cmd = (struct qeth_ipa_cmd *) data; - if (!card->options.layer2 || - !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) { - memcpy(card->dev->dev_addr, - &cmd->data.setadapterparms.data.change_addr.addr, - OSA_ADDR_LEN); - card->info.mac_bits |= QETH_LAYER2_MAC_READ; - } - qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd); - return 0; -} - -static int -qeth_setadpparms_change_macaddr(struct qeth_card *card) -{ - int rc; - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"chgmac"); - - iob = qeth_get_adapter_cmd(card,IPA_SETADP_ALTER_MAC_ADDRESS, - sizeof(struct qeth_ipacmd_setadpparms)); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setadapterparms.data.change_addr.cmd = CHANGE_ADDR_READ_MAC; - cmd->data.setadapterparms.data.change_addr.addr_size = OSA_ADDR_LEN; - memcpy(&cmd->data.setadapterparms.data.change_addr.addr, - card->dev->dev_addr, OSA_ADDR_LEN); - rc = qeth_send_ipa_cmd(card, iob, qeth_setadpparms_change_macaddr_cb, - NULL); - return rc; -} - -static int -qeth_send_setadp_mode(struct qeth_card *card, __u32 command, __u32 mode) -{ - int rc; - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"adpmode"); - - iob = qeth_get_adapter_cmd(card, command, - sizeof(struct qeth_ipacmd_setadpparms)); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setadapterparms.data.mode = mode; - rc = qeth_send_ipa_cmd(card, iob, qeth_default_setadapterparms_cb, - NULL); - return rc; -} - -static int -qeth_setadapter_hstr(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,4,"adphstr"); - - if (qeth_adp_supported(card,IPA_SETADP_SET_BROADCAST_MODE)) { - rc = qeth_send_setadp_mode(card, IPA_SETADP_SET_BROADCAST_MODE, - card->options.broadcast_mode); - if (rc) - PRINT_WARN("couldn't set broadcast mode on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); - rc = qeth_send_setadp_mode(card, IPA_SETADP_ALTER_MAC_ADDRESS, - card->options.macaddr_mode); - if (rc) - PRINT_WARN("couldn't set macaddr mode on " - "device %s: x%x\n", CARD_BUS_ID(card), rc); - return rc; - } - if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL) - PRINT_WARN("set adapter parameters not available " - "to set broadcast mode, using ALLRINGS " - "on device %s:\n", CARD_BUS_ID(card)); - if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL) - PRINT_WARN("set adapter parameters not available " - "to set macaddr mode, using NONCANONICAL " - "on device %s:\n", CARD_BUS_ID(card)); - return 0; -} - -static int -qeth_setadapter_parms(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(setup, 2, "setadprm"); - - if (!qeth_is_supported(card, IPA_SETADAPTERPARMS)){ - PRINT_WARN("set adapter parameters not supported " - "on device %s.\n", - CARD_BUS_ID(card)); - QETH_DBF_TEXT(setup, 2, " notsupp"); - return 0; - } - rc = qeth_query_setadapterparms(card); - if (rc) { - PRINT_WARN("couldn't set adapter parameters on device %s: " - "x%x\n", CARD_BUS_ID(card), rc); - return rc; - } - if (qeth_adp_supported(card,IPA_SETADP_ALTER_MAC_ADDRESS)) { - rc = qeth_setadpparms_change_macaddr(card); - if (rc) - PRINT_WARN("couldn't get MAC address on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); - } - - if ((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR)) - rc = qeth_setadapter_hstr(card); - - return rc; -} - -static int -qeth_layer2_initialize(struct qeth_card *card) -{ - int rc = 0; - - - QETH_DBF_TEXT(setup, 2, "doL2init"); - QETH_DBF_TEXT_(setup, 2, "doL2%s", CARD_BUS_ID(card)); - - rc = qeth_query_setadapterparms(card); - if (rc) { - PRINT_WARN("could not query adapter parameters on device %s: " - "x%x\n", CARD_BUS_ID(card), rc); - } - - rc = qeth_setadpparms_change_macaddr(card); - if (rc) { - PRINT_WARN("couldn't get MAC address on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); - QETH_DBF_TEXT_(setup, 2,"1err%d",rc); - return rc; - } - QETH_DBF_HEX(setup,2, card->dev->dev_addr, OSA_ADDR_LEN); - - rc = qeth_layer2_send_setmac(card, &card->dev->dev_addr[0]); - if (rc) - QETH_DBF_TEXT_(setup, 2,"2err%d",rc); - return 0; -} - - -static int -qeth_send_startstoplan(struct qeth_card *card, enum qeth_ipa_cmds ipacmd, - enum qeth_prot_versions prot) -{ - int rc; - struct qeth_cmd_buffer *iob; - - iob = qeth_get_ipacmd_buffer(card,ipacmd,prot); - rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); - - return rc; -} - -static int -qeth_send_startlan(struct qeth_card *card, enum qeth_prot_versions prot) -{ - int rc; - - QETH_DBF_TEXT_(setup, 2, "strtlan%i", prot); - - rc = qeth_send_startstoplan(card, IPA_CMD_STARTLAN, prot); - return rc; -} - -static int -qeth_send_stoplan(struct qeth_card *card) -{ - int rc = 0; - - /* - * TODO: according to the IPA format document page 14, - * TCP/IP (we!) never issue a STOPLAN - * is this right ?!? - */ - QETH_DBF_TEXT(trace, 2, "stoplan"); - - rc = qeth_send_startstoplan(card, IPA_CMD_STOPLAN, QETH_PROT_IPV4); - return rc; -} - -static int -qeth_query_ipassists_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(setup, 2, "qipasscb"); - - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.prot_version == QETH_PROT_IPV4) { - card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; - card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; - /* Disable IPV6 support hard coded for Hipersockets */ - if(card->info.type == QETH_CARD_TYPE_IQD) - card->options.ipa4.supported_funcs &= ~IPA_IPV6; - } else { -#ifdef CONFIG_QETH_IPV6 - card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; - card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; -#endif - } - QETH_DBF_TEXT(setup, 2, "suppenbl"); - QETH_DBF_TEXT_(setup, 2, "%x",cmd->hdr.ipa_supported); - QETH_DBF_TEXT_(setup, 2, "%x",cmd->hdr.ipa_enabled); - return 0; -} - -static int -qeth_query_ipassists(struct qeth_card *card, enum qeth_prot_versions prot) -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT_(setup, 2, "qipassi%i", prot); - if (card->options.layer2) { - QETH_DBF_TEXT(setup, 2, "noprmly2"); - return -EPERM; - } - - iob = qeth_get_ipacmd_buffer(card,IPA_CMD_QIPASSIST,prot); - rc = qeth_send_ipa_cmd(card, iob, qeth_query_ipassists_cb, NULL); - return rc; -} - -static struct qeth_cmd_buffer * -qeth_get_setassparms_cmd(struct qeth_card *card, enum qeth_ipa_funcs ipa_func, - __u16 cmd_code, __u16 len, - enum qeth_prot_versions prot) -{ - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"getasscm"); - iob = qeth_get_ipacmd_buffer(card,IPA_CMD_SETASSPARMS,prot); - - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setassparms.hdr.assist_no = ipa_func; - cmd->data.setassparms.hdr.length = 8 + len; - cmd->data.setassparms.hdr.command_code = cmd_code; - cmd->data.setassparms.hdr.return_code = 0; - cmd->data.setassparms.hdr.seq_no = 0; - - return iob; -} - -static int -qeth_send_setassparms(struct qeth_card *card, struct qeth_cmd_buffer *iob, - __u16 len, long data, - int (*reply_cb) - (struct qeth_card *,struct qeth_reply *,unsigned long), - void *reply_param) -{ - int rc; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,4,"sendassp"); - - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - if (len <= sizeof(__u32)) - cmd->data.setassparms.data.flags_32bit = (__u32) data; - else /* (len > sizeof(__u32)) */ - memcpy(&cmd->data.setassparms.data, (void *) data, len); - - rc = qeth_send_ipa_cmd(card, iob, reply_cb, reply_param); - return rc; -} - -#ifdef CONFIG_QETH_IPV6 -static int -qeth_send_simple_setassparms_ipv6(struct qeth_card *card, - enum qeth_ipa_funcs ipa_func, __u16 cmd_code) - -{ - int rc; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace,4,"simassp6"); - iob = qeth_get_setassparms_cmd(card, ipa_func, cmd_code, - 0, QETH_PROT_IPV6); - rc = qeth_send_setassparms(card, iob, 0, 0, - qeth_default_setassparms_cb, NULL); - return rc; -} -#endif - -static int -qeth_send_simple_setassparms(struct qeth_card *card, - enum qeth_ipa_funcs ipa_func, - __u16 cmd_code, long data) -{ - int rc; - int length = 0; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace,4,"simassp4"); - if (data) - length = sizeof(__u32); - iob = qeth_get_setassparms_cmd(card, ipa_func, cmd_code, - length, QETH_PROT_IPV4); - rc = qeth_send_setassparms(card, iob, length, data, - qeth_default_setassparms_cb, NULL); - return rc; -} - -static int -qeth_start_ipa_arp_processing(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"ipaarp"); - - if (!qeth_is_supported(card,IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); - return 0; - } - rc = qeth_send_simple_setassparms(card,IPA_ARP_PROCESSING, - IPA_CMD_ASS_START, 0); - if (rc) { - PRINT_WARN("Could not start ARP processing " - "assist on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - } - return rc; -} - -static int -qeth_start_ipa_ip_fragmentation(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"ipaipfrg"); - - if (!qeth_is_supported(card, IPA_IP_FRAGMENTATION)) { - PRINT_INFO("Hardware IP fragmentation not supported on %s\n", - QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - - rc = qeth_send_simple_setassparms(card, IPA_IP_FRAGMENTATION, - IPA_CMD_ASS_START, 0); - if (rc) { - PRINT_WARN("Could not start Hardware IP fragmentation " - "assist on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - } else - PRINT_INFO("Hardware IP fragmentation enabled \n"); - return rc; -} - -static int -qeth_start_ipa_source_mac(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"stsrcmac"); - - if (!card->options.fake_ll) - return -EOPNOTSUPP; - - if (!qeth_is_supported(card, IPA_SOURCE_MAC)) { - PRINT_INFO("Inbound source address not " - "supported on %s\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - - rc = qeth_send_simple_setassparms(card, IPA_SOURCE_MAC, - IPA_CMD_ASS_START, 0); - if (rc) - PRINT_WARN("Could not start inbound source " - "assist on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - return rc; -} - -static int -qeth_start_ipa_vlan(struct qeth_card *card) -{ - int rc = 0; - - QETH_DBF_TEXT(trace,3,"strtvlan"); - -#ifdef CONFIG_QETH_VLAN - if (!qeth_is_supported(card, IPA_FULL_VLAN)) { - PRINT_WARN("VLAN not supported on %s\n", QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - - rc = qeth_send_simple_setassparms(card, IPA_VLAN_PRIO, - IPA_CMD_ASS_START,0); - if (rc) { - PRINT_WARN("Could not start vlan " - "assist on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - } else { - PRINT_INFO("VLAN enabled \n"); - card->dev->features |= - NETIF_F_HW_VLAN_FILTER | - NETIF_F_HW_VLAN_TX | - NETIF_F_HW_VLAN_RX; - } -#endif /* QETH_VLAN */ - return rc; -} - -static int -qeth_start_ipa_multicast(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"stmcast"); - - if (!qeth_is_supported(card, IPA_MULTICASTING)) { - PRINT_WARN("Multicast not supported on %s\n", - QETH_CARD_IFNAME(card)); - return -EOPNOTSUPP; - } - - rc = qeth_send_simple_setassparms(card, IPA_MULTICASTING, - IPA_CMD_ASS_START,0); - if (rc) { - PRINT_WARN("Could not start multicast " - "assist on %s: rc=%i\n", - QETH_CARD_IFNAME(card), rc); - } else { - PRINT_INFO("Multicast enabled\n"); - card->dev->flags |= IFF_MULTICAST; - } - return rc; -} - -#ifdef CONFIG_QETH_IPV6 -static int -qeth_softsetup_ipv6(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"softipv6"); - - rc = qeth_send_startlan(card, QETH_PROT_IPV6); - if (rc) { - PRINT_ERR("IPv6 startlan failed on %s\n", - QETH_CARD_IFNAME(card)); - return rc; - } - rc = qeth_query_ipassists(card,QETH_PROT_IPV6); - if (rc) { - PRINT_ERR("IPv6 query ipassist failed on %s\n", - QETH_CARD_IFNAME(card)); - return rc; - } - rc = qeth_send_simple_setassparms(card, IPA_IPV6, - IPA_CMD_ASS_START, 3); - if (rc) { - PRINT_WARN("IPv6 start assist (version 4) failed " - "on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - return rc; - } - rc = qeth_send_simple_setassparms_ipv6(card, IPA_IPV6, - IPA_CMD_ASS_START); - if (rc) { - PRINT_WARN("IPV6 start assist (version 6) failed " - "on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - return rc; - } - rc = qeth_send_simple_setassparms_ipv6(card, IPA_PASSTHRU, - IPA_CMD_ASS_START); - if (rc) { - PRINT_WARN("Could not enable passthrough " - "on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - return rc; - } - PRINT_INFO("IPV6 enabled \n"); - return 0; -} - -#endif - -static int -qeth_start_ipa_ipv6(struct qeth_card *card) -{ - int rc = 0; -#ifdef CONFIG_QETH_IPV6 - QETH_DBF_TEXT(trace,3,"strtipv6"); - - if (!qeth_is_supported(card, IPA_IPV6)) { - PRINT_WARN("IPv6 not supported on %s\n", - QETH_CARD_IFNAME(card)); - return 0; - } - rc = qeth_softsetup_ipv6(card); -#endif - return rc ; -} - -static int -qeth_start_ipa_broadcast(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"stbrdcst"); - card->info.broadcast_capable = 0; - if (!qeth_is_supported(card, IPA_FILTERING)) { - PRINT_WARN("Broadcast not supported on %s\n", - QETH_CARD_IFNAME(card)); - rc = -EOPNOTSUPP; - goto out; - } - rc = qeth_send_simple_setassparms(card, IPA_FILTERING, - IPA_CMD_ASS_START, 0); - if (rc) { - PRINT_WARN("Could not enable broadcasting filtering " - "on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - goto out; - } - - rc = qeth_send_simple_setassparms(card, IPA_FILTERING, - IPA_CMD_ASS_CONFIGURE, 1); - if (rc) { - PRINT_WARN("Could not set up broadcast filtering on %s: 0x%x\n", - QETH_CARD_IFNAME(card), rc); - goto out; - } - card->info.broadcast_capable = QETH_BROADCAST_WITH_ECHO; - PRINT_INFO("Broadcast enabled \n"); - rc = qeth_send_simple_setassparms(card, IPA_FILTERING, - IPA_CMD_ASS_ENABLE, 1); - if (rc) { - PRINT_WARN("Could not set up broadcast echo filtering on " - "%s: 0x%x\n", QETH_CARD_IFNAME(card), rc); - goto out; - } - card->info.broadcast_capable = QETH_BROADCAST_WITHOUT_ECHO; -out: - if (card->info.broadcast_capable) - card->dev->flags |= IFF_BROADCAST; - else - card->dev->flags &= ~IFF_BROADCAST; - return rc; -} - -static int -qeth_send_checksum_command(struct qeth_card *card) -{ - int rc; - - rc = qeth_send_simple_setassparms(card, IPA_INBOUND_CHECKSUM, - IPA_CMD_ASS_START, 0); - if (rc) { - PRINT_WARN("Starting Inbound HW Checksumming failed on %s: " - "0x%x,\ncontinuing using Inbound SW Checksumming\n", - QETH_CARD_IFNAME(card), rc); - return rc; - } - rc = qeth_send_simple_setassparms(card, IPA_INBOUND_CHECKSUM, - IPA_CMD_ASS_ENABLE, - card->info.csum_mask); - if (rc) { - PRINT_WARN("Enabling Inbound HW Checksumming failed on %s: " - "0x%x,\ncontinuing using Inbound SW Checksumming\n", - QETH_CARD_IFNAME(card), rc); - return rc; - } - return 0; -} - -static int -qeth_start_ipa_checksum(struct qeth_card *card) -{ - int rc = 0; - - QETH_DBF_TEXT(trace,3,"strtcsum"); - - if (card->options.checksum_type == NO_CHECKSUMMING) { - PRINT_WARN("Using no checksumming on %s.\n", - QETH_CARD_IFNAME(card)); - return 0; - } - if (card->options.checksum_type == SW_CHECKSUMMING) { - PRINT_WARN("Using SW checksumming on %s.\n", - QETH_CARD_IFNAME(card)); - return 0; - } - if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM)) { - PRINT_WARN("Inbound HW Checksumming not " - "supported on %s,\ncontinuing " - "using Inbound SW Checksumming\n", - QETH_CARD_IFNAME(card)); - card->options.checksum_type = SW_CHECKSUMMING; - return 0; - } - rc = qeth_send_checksum_command(card); - if (!rc) { - PRINT_INFO("HW Checksumming (inbound) enabled \n"); - } - return rc; -} - -static int -qeth_start_ipa_tso(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"sttso"); - - if (!qeth_is_supported(card, IPA_OUTBOUND_TSO)) { - PRINT_WARN("Outbound TSO not supported on %s\n", - QETH_CARD_IFNAME(card)); - rc = -EOPNOTSUPP; - } else { - rc = qeth_send_simple_setassparms(card, IPA_OUTBOUND_TSO, - IPA_CMD_ASS_START,0); - if (rc) - PRINT_WARN("Could not start outbound TSO " - "assist on %s: rc=%i\n", - QETH_CARD_IFNAME(card), rc); - else - PRINT_INFO("Outbound TSO enabled\n"); - } - if (rc && (card->options.large_send == QETH_LARGE_SEND_TSO)){ - card->options.large_send = QETH_LARGE_SEND_NO; - card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | - NETIF_F_HW_CSUM); - } - return rc; -} - -static int -qeth_start_ipassists(struct qeth_card *card) -{ - QETH_DBF_TEXT(trace,3,"strtipas"); - qeth_start_ipa_arp_processing(card); /* go on*/ - qeth_start_ipa_ip_fragmentation(card); /* go on*/ - qeth_start_ipa_source_mac(card); /* go on*/ - qeth_start_ipa_vlan(card); /* go on*/ - qeth_start_ipa_multicast(card); /* go on*/ - qeth_start_ipa_ipv6(card); /* go on*/ - qeth_start_ipa_broadcast(card); /* go on*/ - qeth_start_ipa_checksum(card); /* go on*/ - qeth_start_ipa_tso(card); /* go on*/ - return 0; -} - -static int -qeth_send_setrouting(struct qeth_card *card, enum qeth_routing_types type, - enum qeth_prot_versions prot) -{ - int rc; - struct qeth_ipa_cmd *cmd; - struct qeth_cmd_buffer *iob; - - QETH_DBF_TEXT(trace,4,"setroutg"); - iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SETRTG, prot); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - cmd->data.setrtg.type = (type); - rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); - - return rc; - -} - -static void -qeth_correct_routing_type(struct qeth_card *card, enum qeth_routing_types *type, - enum qeth_prot_versions prot) -{ - if (card->info.type == QETH_CARD_TYPE_IQD) { - switch (*type) { - case NO_ROUTER: - case PRIMARY_CONNECTOR: - case SECONDARY_CONNECTOR: - case MULTICAST_ROUTER: - return; - default: - goto out_inval; - } - } else { - switch (*type) { - case NO_ROUTER: - case PRIMARY_ROUTER: - case SECONDARY_ROUTER: - return; - case MULTICAST_ROUTER: - if (qeth_is_ipafunc_supported(card, prot, - IPA_OSA_MC_ROUTER)) - return; - default: - goto out_inval; - } - } -out_inval: - PRINT_WARN("Routing type '%s' not supported for interface %s.\n" - "Router status set to 'no router'.\n", - ((*type == PRIMARY_ROUTER)? "primary router" : - (*type == SECONDARY_ROUTER)? "secondary router" : - (*type == PRIMARY_CONNECTOR)? "primary connector" : - (*type == SECONDARY_CONNECTOR)? "secondary connector" : - (*type == MULTICAST_ROUTER)? "multicast router" : - "unknown"), - card->dev->name); - *type = NO_ROUTER; -} - -int -qeth_setrouting_v4(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(trace,3,"setrtg4"); - - qeth_correct_routing_type(card, &card->options.route4.type, - QETH_PROT_IPV4); - - rc = qeth_send_setrouting(card, card->options.route4.type, - QETH_PROT_IPV4); - if (rc) { - card->options.route4.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); - } - return rc; -} - -int -qeth_setrouting_v6(struct qeth_card *card) -{ - int rc = 0; - - QETH_DBF_TEXT(trace,3,"setrtg6"); -#ifdef CONFIG_QETH_IPV6 - - if (!qeth_is_supported(card, IPA_IPV6)) - return 0; - qeth_correct_routing_type(card, &card->options.route6.type, - QETH_PROT_IPV6); - - rc = qeth_send_setrouting(card, card->options.route6.type, - QETH_PROT_IPV6); - if (rc) { - card->options.route6.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); - } -#endif - return rc; -} - -int -qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type) -{ - int rc = 0; - - if (card->dev == NULL) { - card->options.large_send = type; - return 0; - } - if (card->state == CARD_STATE_UP) - netif_tx_disable(card->dev); - card->options.large_send = type; - switch (card->options.large_send) { - case QETH_LARGE_SEND_EDDP: - card->dev->features |= NETIF_F_TSO | NETIF_F_SG | - NETIF_F_HW_CSUM; - break; - case QETH_LARGE_SEND_TSO: - if (qeth_is_supported(card, IPA_OUTBOUND_TSO)){ - card->dev->features |= NETIF_F_TSO | NETIF_F_SG | - NETIF_F_HW_CSUM; - } else { - PRINT_WARN("TSO not supported on %s. " - "large_send set to 'no'.\n", - card->dev->name); - card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | - NETIF_F_HW_CSUM); - card->options.large_send = QETH_LARGE_SEND_NO; - rc = -EOPNOTSUPP; - } - break; - default: /* includes QETH_LARGE_SEND_NO */ - card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | - NETIF_F_HW_CSUM); - break; - } - if (card->state == CARD_STATE_UP) - netif_wake_queue(card->dev); - return rc; -} - -/* - * softsetup card: init IPA stuff - */ -static int -qeth_softsetup_card(struct qeth_card *card) -{ - int rc; - - QETH_DBF_TEXT(setup, 2, "softsetp"); - - if ((rc = qeth_send_startlan(card, QETH_PROT_IPV4))){ - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - if (rc == 0xe080){ - PRINT_WARN("LAN on card %s if offline! " - "Waiting for STARTLAN from card.\n", - CARD_BUS_ID(card)); - card->lan_online = 0; - } - return rc; - } else - card->lan_online = 1; - if (card->info.type==QETH_CARD_TYPE_OSN) - goto out; - qeth_set_large_send(card, card->options.large_send); - if (card->options.layer2) { - card->dev->features |= - NETIF_F_HW_VLAN_FILTER | - NETIF_F_HW_VLAN_TX | - NETIF_F_HW_VLAN_RX; - card->dev->flags|=IFF_MULTICAST|IFF_BROADCAST; - card->info.broadcast_capable=1; - if ((rc = qeth_layer2_initialize(card))) { - QETH_DBF_TEXT_(setup, 2, "L2err%d", rc); - return rc; - } -#ifdef CONFIG_QETH_VLAN - qeth_layer2_process_vlans(card, 0); -#endif - goto out; - } - if ((rc = qeth_setadapter_parms(card))) - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - if ((rc = qeth_start_ipassists(card))) - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - if ((rc = qeth_setrouting_v4(card))) - QETH_DBF_TEXT_(setup, 2, "4err%d", rc); - if ((rc = qeth_setrouting_v6(card))) - QETH_DBF_TEXT_(setup, 2, "5err%d", rc); -out: - netif_tx_disable(card->dev); - return 0; -} - -#ifdef CONFIG_QETH_IPV6 -static int -qeth_get_unique_id_cb(struct qeth_card *card, struct qeth_reply *reply, - unsigned long data) -{ - struct qeth_ipa_cmd *cmd; - - cmd = (struct qeth_ipa_cmd *) data; - if (cmd->hdr.return_code == 0) - card->info.unique_id = *((__u16 *) - &cmd->data.create_destroy_addr.unique_id[6]); - else { - card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | - UNIQUE_ID_NOT_BY_CARD; - PRINT_WARN("couldn't get a unique id from the card on device " - "%s (result=x%x), using default id. ipv6 " - "autoconfig on other lpars may lead to duplicate " - "ip addresses. please use manually " - "configured ones.\n", - CARD_BUS_ID(card), cmd->hdr.return_code); - } - return 0; -} -#endif - -static int -qeth_put_unique_id(struct qeth_card *card) -{ - - int rc = 0; -#ifdef CONFIG_QETH_IPV6 - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(trace,2,"puniqeid"); - - if ((card->info.unique_id & UNIQUE_ID_NOT_BY_CARD) == - UNIQUE_ID_NOT_BY_CARD) - return -1; - iob = qeth_get_ipacmd_buffer(card, IPA_CMD_DESTROY_ADDR, - QETH_PROT_IPV6); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - *((__u16 *) &cmd->data.create_destroy_addr.unique_id[6]) = - card->info.unique_id; - memcpy(&cmd->data.create_destroy_addr.unique_id[0], - card->dev->dev_addr, OSA_ADDR_LEN); - rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); -#else - card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | - UNIQUE_ID_NOT_BY_CARD; -#endif - return rc; -} - -/** - * Clear IP List - */ -static void -qeth_clear_ip_list(struct qeth_card *card, int clean, int recover) -{ - struct qeth_ipaddr *addr, *tmp; - unsigned long flags; - - QETH_DBF_TEXT(trace,4,"clearip"); - spin_lock_irqsave(&card->ip_lock, flags); - /* clear todo list */ - list_for_each_entry_safe(addr, tmp, card->ip_tbd_list, entry){ - list_del(&addr->entry); - kfree(addr); - } - - while (!list_empty(&card->ip_list)) { - addr = list_entry(card->ip_list.next, - struct qeth_ipaddr, entry); - list_del_init(&addr->entry); - if (clean) { - spin_unlock_irqrestore(&card->ip_lock, flags); - qeth_deregister_addr_entry(card, addr); - spin_lock_irqsave(&card->ip_lock, flags); - } - if (!recover || addr->is_multicast) { - kfree(addr); - continue; - } - list_add_tail(&addr->entry, card->ip_tbd_list); - } - spin_unlock_irqrestore(&card->ip_lock, flags); -} - -static void -qeth_set_allowed_threads(struct qeth_card *card, unsigned long threads, - int clear_start_mask) -{ - unsigned long flags; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - card->thread_allowed_mask = threads; - if (clear_start_mask) - card->thread_start_mask &= threads; - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - wake_up(&card->wait_q); -} - -static int -qeth_threads_running(struct qeth_card *card, unsigned long threads) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&card->thread_mask_lock, flags); - rc = (card->thread_running_mask & threads); - spin_unlock_irqrestore(&card->thread_mask_lock, flags); - return rc; -} - -static int -qeth_wait_for_threads(struct qeth_card *card, unsigned long threads) -{ - return wait_event_interruptible(card->wait_q, - qeth_threads_running(card, threads) == 0); -} - -static int -qeth_stop_card(struct qeth_card *card, int recovery_mode) -{ - int rc = 0; - - QETH_DBF_TEXT(setup ,2,"stopcard"); - QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); - - qeth_set_allowed_threads(card, 0, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) - return -ERESTARTSYS; - if (card->read.state == CH_STATE_UP && - card->write.state == CH_STATE_UP && - (card->state == CARD_STATE_UP)) { - if (recovery_mode && - card->info.type != QETH_CARD_TYPE_OSN) { - qeth_stop(card->dev); - } else { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); - } - if (!card->use_hard_stop) { - __u8 *mac = &card->dev->dev_addr[0]; - rc = qeth_layer2_send_delmac(card, mac); - QETH_DBF_TEXT_(setup, 2, "Lerr%d", rc); - if ((rc = qeth_send_stoplan(card))) - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - } - card->state = CARD_STATE_SOFTSETUP; - } - if (card->state == CARD_STATE_SOFTSETUP) { -#ifdef CONFIG_QETH_VLAN - if (card->options.layer2) - qeth_layer2_process_vlans(card, 1); -#endif - qeth_clear_ip_list(card, !card->use_hard_stop, 1); - qeth_clear_ipacmd_list(card); - card->state = CARD_STATE_HARDSETUP; - } - if (card->state == CARD_STATE_HARDSETUP) { - if ((!card->use_hard_stop) && - (!card->options.layer2)) - if ((rc = qeth_put_unique_id(card))) - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - qeth_qdio_clear_card(card, 0); - qeth_clear_qdio_buffers(card); - qeth_clear_working_pool_list(card); - card->state = CARD_STATE_DOWN; - } - if (card->state == CARD_STATE_DOWN) { - qeth_clear_cmd_buffers(&card->read); - qeth_clear_cmd_buffers(&card->write); - } - card->use_hard_stop = 0; - return rc; -} - - -static int -qeth_get_unique_id(struct qeth_card *card) -{ - int rc = 0; -#ifdef CONFIG_QETH_IPV6 - struct qeth_cmd_buffer *iob; - struct qeth_ipa_cmd *cmd; - - QETH_DBF_TEXT(setup, 2, "guniqeid"); - - if (!qeth_is_supported(card,IPA_IPV6)) { - card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | - UNIQUE_ID_NOT_BY_CARD; - return 0; - } - - iob = qeth_get_ipacmd_buffer(card, IPA_CMD_CREATE_ADDR, - QETH_PROT_IPV6); - cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE); - *((__u16 *) &cmd->data.create_destroy_addr.unique_id[6]) = - card->info.unique_id; - - rc = qeth_send_ipa_cmd(card, iob, qeth_get_unique_id_cb, NULL); -#else - card->info.unique_id = UNIQUE_ID_IF_CREATE_ADDR_FAILED | - UNIQUE_ID_NOT_BY_CARD; -#endif - return rc; -} -static void -qeth_print_status_with_portname(struct qeth_card *card) -{ - char dbf_text[15]; - int i; - - sprintf(dbf_text, "%s", card->info.portname + 1); - for (i = 0; i < 8; i++) - dbf_text[i] = - (char) _ebcasc[(__u8) dbf_text[i]]; - dbf_text[8] = 0; - printk("qeth: Device %s/%s/%s is a%s card%s%s%s\n" - "with link type %s (portname: %s)\n", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card), - qeth_get_cardname(card), - (card->info.mcl_level[0]) ? " (level: " : "", - (card->info.mcl_level[0]) ? card->info.mcl_level : "", - (card->info.mcl_level[0]) ? ")" : "", - qeth_get_cardname_short(card), - dbf_text); - -} - -static void -qeth_print_status_no_portname(struct qeth_card *card) -{ - if (card->info.portname[0]) - printk("qeth: Device %s/%s/%s is a%s " - "card%s%s%s\nwith link type %s " - "(no portname needed by interface).\n", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card), - qeth_get_cardname(card), - (card->info.mcl_level[0]) ? " (level: " : "", - (card->info.mcl_level[0]) ? card->info.mcl_level : "", - (card->info.mcl_level[0]) ? ")" : "", - qeth_get_cardname_short(card)); - else - printk("qeth: Device %s/%s/%s is a%s " - "card%s%s%s\nwith link type %s.\n", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card), - qeth_get_cardname(card), - (card->info.mcl_level[0]) ? " (level: " : "", - (card->info.mcl_level[0]) ? card->info.mcl_level : "", - (card->info.mcl_level[0]) ? ")" : "", - qeth_get_cardname_short(card)); -} - -static void -qeth_print_status_message(struct qeth_card *card) -{ - switch (card->info.type) { - case QETH_CARD_TYPE_OSAE: - /* VM will use a non-zero first character - * to indicate a HiperSockets like reporting - * of the level OSA sets the first character to zero - * */ - if (!card->info.mcl_level[0]) { - sprintf(card->info.mcl_level,"%02x%02x", - card->info.mcl_level[2], - card->info.mcl_level[3]); - - card->info.mcl_level[QETH_MCL_LENGTH] = 0; - break; - } - /* fallthrough */ - case QETH_CARD_TYPE_IQD: - if (card->info.guestlan) { - card->info.mcl_level[0] = (char) _ebcasc[(__u8) - card->info.mcl_level[0]]; - card->info.mcl_level[1] = (char) _ebcasc[(__u8) - card->info.mcl_level[1]]; - card->info.mcl_level[2] = (char) _ebcasc[(__u8) - card->info.mcl_level[2]]; - card->info.mcl_level[3] = (char) _ebcasc[(__u8) - card->info.mcl_level[3]]; - card->info.mcl_level[QETH_MCL_LENGTH] = 0; - } - break; - default: - memset(&card->info.mcl_level[0], 0, QETH_MCL_LENGTH + 1); - } - if (card->info.portname_required) - qeth_print_status_with_portname(card); - else - qeth_print_status_no_portname(card); -} - -static int -qeth_register_netdev(struct qeth_card *card) -{ - QETH_DBF_TEXT(setup, 3, "regnetd"); - if (card->dev->reg_state != NETREG_UNINITIALIZED) - return 0; - /* sysfs magic */ - SET_NETDEV_DEV(card->dev, &card->gdev->dev); - return register_netdev(card->dev); -} - -static void -qeth_start_again(struct qeth_card *card, int recovery_mode) -{ - QETH_DBF_TEXT(setup ,2, "startag"); - - if (recovery_mode && - card->info.type != QETH_CARD_TYPE_OSN) { - qeth_open(card->dev); - } else { - rtnl_lock(); - dev_open(card->dev); - rtnl_unlock(); - } - /* this also sets saved unicast addresses */ - qeth_set_multicast_list(card->dev); -} - - -/* Layer 2 specific stuff */ -#define IGNORE_PARAM_EQ(option,value,reset_value,msg) \ - if (card->options.option == value) { \ - PRINT_ERR("%s not supported with layer 2 " \ - "functionality, ignoring option on read" \ - "channel device %s .\n",msg,CARD_RDEV_ID(card)); \ - card->options.option = reset_value; \ - } -#define IGNORE_PARAM_NEQ(option,value,reset_value,msg) \ - if (card->options.option != value) { \ - PRINT_ERR("%s not supported with layer 2 " \ - "functionality, ignoring option on read" \ - "channel device %s .\n",msg,CARD_RDEV_ID(card)); \ - card->options.option = reset_value; \ - } - - -static void qeth_make_parameters_consistent(struct qeth_card *card) -{ - - if (card->options.layer2 == 0) - return; - if (card->info.type == QETH_CARD_TYPE_OSN) - return; - if (card->info.type == QETH_CARD_TYPE_IQD) { - PRINT_ERR("Device %s does not support layer 2 functionality." \ - " Ignoring layer2 option.\n",CARD_BUS_ID(card)); - card->options.layer2 = 0; - return; - } - IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); -#ifdef CONFIG_QETH_IPV6 - IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); -#endif - IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING, - QETH_CHECKSUM_DEFAULT, - "Checksumming options are"); - IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS, - QETH_TR_BROADCAST_ALLRINGS, - "Broadcast mode options are"); - IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL, - QETH_TR_MACADDR_NONCANONICAL, - "Canonical MAC addr options are"); - IGNORE_PARAM_NEQ(fake_broadcast, 0, 0, - "Broadcast faking options are"); - IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN, - DEFAULT_ADD_HHLEN,"Option add_hhlen is"); - IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is"); -} - - -static int -__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode) -{ - struct qeth_card *card = gdev->dev.driver_data; - int rc = 0; - enum qeth_card_states recover_flag; - - BUG_ON(!card); - QETH_DBF_TEXT(setup ,2, "setonlin"); - QETH_DBF_HEX(setup, 2, &card, sizeof(void *)); - - qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)){ - PRINT_WARN("set_online of card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } - - recover_flag = card->state; - if ((rc = ccw_device_set_online(CARD_RDEV(card))) || - (rc = ccw_device_set_online(CARD_WDEV(card))) || - (rc = ccw_device_set_online(CARD_DDEV(card)))){ - QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - return -EIO; - } - - qeth_make_parameters_consistent(card); - - if ((rc = qeth_hardsetup_card(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - goto out_remove; - } - card->state = CARD_STATE_HARDSETUP; - - if (!(rc = qeth_query_ipassists(card,QETH_PROT_IPV4))) - rc = qeth_get_unique_id(card); - - if (rc && card->options.layer2 == 0) { - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); - goto out_remove; - } - qeth_print_status_message(card); - if ((rc = qeth_register_netdev(card))){ - QETH_DBF_TEXT_(setup, 2, "4err%d", rc); - goto out_remove; - } - if ((rc = qeth_softsetup_card(card))){ - QETH_DBF_TEXT_(setup, 2, "5err%d", rc); - goto out_remove; - } - - if ((rc = qeth_init_qdio_queues(card))){ - QETH_DBF_TEXT_(setup, 2, "6err%d", rc); - goto out_remove; - } - card->state = CARD_STATE_SOFTSETUP; - netif_carrier_on(card->dev); - - qeth_set_allowed_threads(card, 0xffffffff, 0); - if (recover_flag == CARD_STATE_RECOVER) - qeth_start_again(card, recovery_mode); - qeth_notify_processes(); - return 0; -out_remove: - card->use_hard_stop = 1; - qeth_stop_card(card, 0); - ccw_device_set_offline(CARD_DDEV(card)); - ccw_device_set_offline(CARD_WDEV(card)); - ccw_device_set_offline(CARD_RDEV(card)); - if (recover_flag == CARD_STATE_RECOVER) - card->state = CARD_STATE_RECOVER; - else - card->state = CARD_STATE_DOWN; - return -ENODEV; -} - -static int -qeth_set_online(struct ccwgroup_device *gdev) -{ - return __qeth_set_online(gdev, 0); -} - -static struct ccw_device_id qeth_ids[] = { - {CCW_DEVICE(0x1731, 0x01), .driver_info = QETH_CARD_TYPE_OSAE}, - {CCW_DEVICE(0x1731, 0x05), .driver_info = QETH_CARD_TYPE_IQD}, - {CCW_DEVICE(0x1731, 0x06), .driver_info = QETH_CARD_TYPE_OSN}, - {}, -}; -MODULE_DEVICE_TABLE(ccw, qeth_ids); - -struct device *qeth_root_dev = NULL; - -struct ccwgroup_driver qeth_ccwgroup_driver = { - .owner = THIS_MODULE, - .name = "qeth", - .driver_id = 0xD8C5E3C8, - .probe = qeth_probe_device, - .remove = qeth_remove_device, - .set_online = qeth_set_online, - .set_offline = qeth_set_offline, -}; - -struct ccw_driver qeth_ccw_driver = { - .name = "qeth", - .ids = qeth_ids, - .probe = ccwgroup_probe_ccwdev, - .remove = ccwgroup_remove_ccwdev, -}; - - -static void -qeth_unregister_dbf_views(void) -{ - if (qeth_dbf_setup) - debug_unregister(qeth_dbf_setup); - if (qeth_dbf_qerr) - debug_unregister(qeth_dbf_qerr); - if (qeth_dbf_sense) - debug_unregister(qeth_dbf_sense); - if (qeth_dbf_misc) - debug_unregister(qeth_dbf_misc); - if (qeth_dbf_data) - debug_unregister(qeth_dbf_data); - if (qeth_dbf_control) - debug_unregister(qeth_dbf_control); - if (qeth_dbf_trace) - debug_unregister(qeth_dbf_trace); -} -static int -qeth_register_dbf_views(void) -{ - qeth_dbf_setup = debug_register(QETH_DBF_SETUP_NAME, - QETH_DBF_SETUP_PAGES, - QETH_DBF_SETUP_NR_AREAS, - QETH_DBF_SETUP_LEN); - qeth_dbf_misc = debug_register(QETH_DBF_MISC_NAME, - QETH_DBF_MISC_PAGES, - QETH_DBF_MISC_NR_AREAS, - QETH_DBF_MISC_LEN); - qeth_dbf_data = debug_register(QETH_DBF_DATA_NAME, - QETH_DBF_DATA_PAGES, - QETH_DBF_DATA_NR_AREAS, - QETH_DBF_DATA_LEN); - qeth_dbf_control = debug_register(QETH_DBF_CONTROL_NAME, - QETH_DBF_CONTROL_PAGES, - QETH_DBF_CONTROL_NR_AREAS, - QETH_DBF_CONTROL_LEN); - qeth_dbf_sense = debug_register(QETH_DBF_SENSE_NAME, - QETH_DBF_SENSE_PAGES, - QETH_DBF_SENSE_NR_AREAS, - QETH_DBF_SENSE_LEN); - qeth_dbf_qerr = debug_register(QETH_DBF_QERR_NAME, - QETH_DBF_QERR_PAGES, - QETH_DBF_QERR_NR_AREAS, - QETH_DBF_QERR_LEN); - qeth_dbf_trace = debug_register(QETH_DBF_TRACE_NAME, - QETH_DBF_TRACE_PAGES, - QETH_DBF_TRACE_NR_AREAS, - QETH_DBF_TRACE_LEN); - - if ((qeth_dbf_setup == NULL) || (qeth_dbf_misc == NULL) || - (qeth_dbf_data == NULL) || (qeth_dbf_control == NULL) || - (qeth_dbf_sense == NULL) || (qeth_dbf_qerr == NULL) || - (qeth_dbf_trace == NULL)) { - qeth_unregister_dbf_views(); - return -ENOMEM; - } - debug_register_view(qeth_dbf_setup, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_setup, QETH_DBF_SETUP_LEVEL); - - debug_register_view(qeth_dbf_misc, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_misc, QETH_DBF_MISC_LEVEL); - - debug_register_view(qeth_dbf_data, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_data, QETH_DBF_DATA_LEVEL); - - debug_register_view(qeth_dbf_control, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_control, QETH_DBF_CONTROL_LEVEL); - - debug_register_view(qeth_dbf_sense, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_sense, QETH_DBF_SENSE_LEVEL); - - debug_register_view(qeth_dbf_qerr, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_qerr, QETH_DBF_QERR_LEVEL); - - debug_register_view(qeth_dbf_trace, &debug_hex_ascii_view); - debug_set_level(qeth_dbf_trace, QETH_DBF_TRACE_LEVEL); - - return 0; -} - -#ifdef CONFIG_QETH_IPV6 -extern struct neigh_table arp_tbl; -static struct neigh_ops *arp_direct_ops; -static int (*qeth_old_arp_constructor) (struct neighbour *); - -static struct neigh_ops arp_direct_ops_template = { - .family = AF_INET, - .solicit = NULL, - .error_report = NULL, - .output = dev_queue_xmit, - .connected_output = dev_queue_xmit, - .hh_output = dev_queue_xmit, - .queue_xmit = dev_queue_xmit -}; - -static int -qeth_arp_constructor(struct neighbour *neigh) -{ - struct net_device *dev = neigh->dev; - struct in_device *in_dev; - struct neigh_parms *parms; - struct qeth_card *card; - - card = qeth_get_card_from_dev(dev); - if (card == NULL) - goto out; - if((card->options.layer2) || - (card->dev->header_ops == &qeth_fake_ops)) - goto out; - - rcu_read_lock(); - in_dev = __in_dev_get_rcu(dev); - if (in_dev == NULL) { - rcu_read_unlock(); - return -EINVAL; - } - - parms = in_dev->arp_parms; - __neigh_parms_put(neigh->parms); - neigh->parms = neigh_parms_clone(parms); - rcu_read_unlock(); - - neigh->type = inet_addr_type(&init_net, *(__be32 *) neigh->primary_key); - neigh->nud_state = NUD_NOARP; - neigh->ops = arp_direct_ops; - neigh->output = neigh->ops->queue_xmit; - return 0; -out: - return qeth_old_arp_constructor(neigh); -} -#endif /*CONFIG_QETH_IPV6*/ - -/* - * IP address takeover related functions - */ -static void -qeth_clear_ipato_list(struct qeth_card *card) -{ - struct qeth_ipato_entry *ipatoe, *tmp; - unsigned long flags; - - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry_safe(ipatoe, tmp, &card->ipato.entries, entry) { - list_del(&ipatoe->entry); - kfree(ipatoe); - } - spin_unlock_irqrestore(&card->ip_lock, flags); -} - -int -qeth_add_ipato_entry(struct qeth_card *card, struct qeth_ipato_entry *new) -{ - struct qeth_ipato_entry *ipatoe; - unsigned long flags; - int rc = 0; - - QETH_DBF_TEXT(trace, 2, "addipato"); - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry(ipatoe, &card->ipato.entries, entry){ - if (ipatoe->proto != new->proto) - continue; - if (!memcmp(ipatoe->addr, new->addr, - (ipatoe->proto == QETH_PROT_IPV4)? 4:16) && - (ipatoe->mask_bits == new->mask_bits)){ - PRINT_WARN("ipato entry already exists!\n"); - rc = -EEXIST; - break; - } - } - if (!rc) { - list_add_tail(&new->entry, &card->ipato.entries); - } - spin_unlock_irqrestore(&card->ip_lock, flags); - return rc; -} - -void -qeth_del_ipato_entry(struct qeth_card *card, enum qeth_prot_versions proto, - u8 *addr, int mask_bits) -{ - struct qeth_ipato_entry *ipatoe, *tmp; - unsigned long flags; - - QETH_DBF_TEXT(trace, 2, "delipato"); - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry_safe(ipatoe, tmp, &card->ipato.entries, entry){ - if (ipatoe->proto != proto) - continue; - if (!memcmp(ipatoe->addr, addr, - (proto == QETH_PROT_IPV4)? 4:16) && - (ipatoe->mask_bits == mask_bits)){ - list_del(&ipatoe->entry); - kfree(ipatoe); - } - } - spin_unlock_irqrestore(&card->ip_lock, flags); -} - -static void -qeth_convert_addr_to_bits(u8 *addr, u8 *bits, int len) -{ - int i, j; - u8 octet; - - for (i = 0; i < len; ++i){ - octet = addr[i]; - for (j = 7; j >= 0; --j){ - bits[i*8 + j] = octet & 1; - octet >>= 1; - } - } -} - -static int -qeth_is_addr_covered_by_ipato(struct qeth_card *card, struct qeth_ipaddr *addr) -{ - struct qeth_ipato_entry *ipatoe; - u8 addr_bits[128] = {0, }; - u8 ipatoe_bits[128] = {0, }; - int rc = 0; - - if (!card->ipato.enabled) - return 0; - - qeth_convert_addr_to_bits((u8 *) &addr->u, addr_bits, - (addr->proto == QETH_PROT_IPV4)? 4:16); - list_for_each_entry(ipatoe, &card->ipato.entries, entry){ - if (addr->proto != ipatoe->proto) - continue; - qeth_convert_addr_to_bits(ipatoe->addr, ipatoe_bits, - (ipatoe->proto==QETH_PROT_IPV4) ? - 4:16); - if (addr->proto == QETH_PROT_IPV4) - rc = !memcmp(addr_bits, ipatoe_bits, - min(32, ipatoe->mask_bits)); - else - rc = !memcmp(addr_bits, ipatoe_bits, - min(128, ipatoe->mask_bits)); - if (rc) - break; - } - /* invert? */ - if ((addr->proto == QETH_PROT_IPV4) && card->ipato.invert4) - rc = !rc; - else if ((addr->proto == QETH_PROT_IPV6) && card->ipato.invert6) - rc = !rc; - - return rc; -} - -/* - * VIPA related functions - */ -int -qeth_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, - const u8 *addr) -{ - struct qeth_ipaddr *ipaddr; - unsigned long flags; - int rc = 0; - - ipaddr = qeth_get_addr_buffer(proto); - if (ipaddr){ - if (proto == QETH_PROT_IPV4){ - QETH_DBF_TEXT(trace, 2, "addvipa4"); - memcpy(&ipaddr->u.a4.addr, addr, 4); - ipaddr->u.a4.mask = 0; -#ifdef CONFIG_QETH_IPV6 - } else if (proto == QETH_PROT_IPV6){ - QETH_DBF_TEXT(trace, 2, "addvipa6"); - memcpy(&ipaddr->u.a6.addr, addr, 16); - ipaddr->u.a6.pfxlen = 0; -#endif - } - ipaddr->type = QETH_IP_TYPE_VIPA; - ipaddr->set_flags = QETH_IPA_SETIP_VIPA_FLAG; - ipaddr->del_flags = QETH_IPA_DELIP_VIPA_FLAG; - } else - return -ENOMEM; - spin_lock_irqsave(&card->ip_lock, flags); - if (__qeth_address_exists_in_list(&card->ip_list, ipaddr, 0) || - __qeth_address_exists_in_list(card->ip_tbd_list, ipaddr, 0)) - rc = -EEXIST; - spin_unlock_irqrestore(&card->ip_lock, flags); - if (rc){ - PRINT_WARN("Cannot add VIPA. Address already exists!\n"); - return rc; - } - if (!qeth_add_ip(card, ipaddr)) - kfree(ipaddr); - qeth_set_ip_addr_list(card); - return rc; -} - -void -qeth_del_vipa(struct qeth_card *card, enum qeth_prot_versions proto, - const u8 *addr) -{ - struct qeth_ipaddr *ipaddr; - - ipaddr = qeth_get_addr_buffer(proto); - if (ipaddr){ - if (proto == QETH_PROT_IPV4){ - QETH_DBF_TEXT(trace, 2, "delvipa4"); - memcpy(&ipaddr->u.a4.addr, addr, 4); - ipaddr->u.a4.mask = 0; -#ifdef CONFIG_QETH_IPV6 - } else if (proto == QETH_PROT_IPV6){ - QETH_DBF_TEXT(trace, 2, "delvipa6"); - memcpy(&ipaddr->u.a6.addr, addr, 16); - ipaddr->u.a6.pfxlen = 0; -#endif - } - ipaddr->type = QETH_IP_TYPE_VIPA; - } else - return; - if (!qeth_delete_ip(card, ipaddr)) - kfree(ipaddr); - qeth_set_ip_addr_list(card); -} - -/* - * proxy ARP related functions - */ -int -qeth_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, - const u8 *addr) -{ - struct qeth_ipaddr *ipaddr; - unsigned long flags; - int rc = 0; - - ipaddr = qeth_get_addr_buffer(proto); - if (ipaddr){ - if (proto == QETH_PROT_IPV4){ - QETH_DBF_TEXT(trace, 2, "addrxip4"); - memcpy(&ipaddr->u.a4.addr, addr, 4); - ipaddr->u.a4.mask = 0; -#ifdef CONFIG_QETH_IPV6 - } else if (proto == QETH_PROT_IPV6){ - QETH_DBF_TEXT(trace, 2, "addrxip6"); - memcpy(&ipaddr->u.a6.addr, addr, 16); - ipaddr->u.a6.pfxlen = 0; -#endif - } - ipaddr->type = QETH_IP_TYPE_RXIP; - ipaddr->set_flags = QETH_IPA_SETIP_TAKEOVER_FLAG; - ipaddr->del_flags = 0; - } else - return -ENOMEM; - spin_lock_irqsave(&card->ip_lock, flags); - if (__qeth_address_exists_in_list(&card->ip_list, ipaddr, 0) || - __qeth_address_exists_in_list(card->ip_tbd_list, ipaddr, 0)) - rc = -EEXIST; - spin_unlock_irqrestore(&card->ip_lock, flags); - if (rc){ - PRINT_WARN("Cannot add RXIP. Address already exists!\n"); - return rc; - } - if (!qeth_add_ip(card, ipaddr)) - kfree(ipaddr); - qeth_set_ip_addr_list(card); - return 0; -} - -void -qeth_del_rxip(struct qeth_card *card, enum qeth_prot_versions proto, - const u8 *addr) -{ - struct qeth_ipaddr *ipaddr; - - ipaddr = qeth_get_addr_buffer(proto); - if (ipaddr){ - if (proto == QETH_PROT_IPV4){ - QETH_DBF_TEXT(trace, 2, "addrxip4"); - memcpy(&ipaddr->u.a4.addr, addr, 4); - ipaddr->u.a4.mask = 0; -#ifdef CONFIG_QETH_IPV6 - } else if (proto == QETH_PROT_IPV6){ - QETH_DBF_TEXT(trace, 2, "addrxip6"); - memcpy(&ipaddr->u.a6.addr, addr, 16); - ipaddr->u.a6.pfxlen = 0; -#endif - } - ipaddr->type = QETH_IP_TYPE_RXIP; - } else - return; - if (!qeth_delete_ip(card, ipaddr)) - kfree(ipaddr); - qeth_set_ip_addr_list(card); -} - -/** - * IP event handler - */ -static int -qeth_ip_event(struct notifier_block *this, - unsigned long event,void *ptr) -{ - struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; - struct net_device *dev =(struct net_device *) ifa->ifa_dev->dev; - struct qeth_ipaddr *addr; - struct qeth_card *card; - - QETH_DBF_TEXT(trace,3,"ipevent"); - card = qeth_get_card_from_dev(dev); - if (!card) - return NOTIFY_DONE; - if (card->options.layer2) - return NOTIFY_DONE; - - addr = qeth_get_addr_buffer(QETH_PROT_IPV4); - if (addr != NULL) { - addr->u.a4.addr = ifa->ifa_address; - addr->u.a4.mask = ifa->ifa_mask; - addr->type = QETH_IP_TYPE_NORMAL; - } else - goto out; - - switch(event) { - case NETDEV_UP: - if (!qeth_add_ip(card, addr)) - kfree(addr); - break; - case NETDEV_DOWN: - if (!qeth_delete_ip(card, addr)) - kfree(addr); - break; - default: - break; - } - qeth_set_ip_addr_list(card); -out: - return NOTIFY_DONE; -} - -static struct notifier_block qeth_ip_notifier = { - qeth_ip_event, - NULL, -}; - -#ifdef CONFIG_QETH_IPV6 -/** - * IPv6 event handler - */ -static int -qeth_ip6_event(struct notifier_block *this, - unsigned long event,void *ptr) -{ - - struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; - struct net_device *dev = (struct net_device *)ifa->idev->dev; - struct qeth_ipaddr *addr; - struct qeth_card *card; - - QETH_DBF_TEXT(trace,3,"ip6event"); - - card = qeth_get_card_from_dev(dev); - if (!card) - return NOTIFY_DONE; - if (!qeth_is_supported(card, IPA_IPV6)) - return NOTIFY_DONE; - - addr = qeth_get_addr_buffer(QETH_PROT_IPV6); - if (addr != NULL) { - memcpy(&addr->u.a6.addr, &ifa->addr, sizeof(struct in6_addr)); - addr->u.a6.pfxlen = ifa->prefix_len; - addr->type = QETH_IP_TYPE_NORMAL; - } else - goto out; - - switch(event) { - case NETDEV_UP: - if (!qeth_add_ip(card, addr)) - kfree(addr); - break; - case NETDEV_DOWN: - if (!qeth_delete_ip(card, addr)) - kfree(addr); - break; - default: - break; - } - qeth_set_ip_addr_list(card); -out: - return NOTIFY_DONE; -} - -static struct notifier_block qeth_ip6_notifier = { - qeth_ip6_event, - NULL, -}; -#endif - -static int -__qeth_reboot_event_card(struct device *dev, void *data) -{ - struct qeth_card *card; - - card = (struct qeth_card *) dev->driver_data; - qeth_clear_ip_list(card, 0, 0); - qeth_qdio_clear_card(card, 0); - qeth_clear_qdio_buffers(card); - return 0; -} - -static int -qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - int ret; - - ret = driver_for_each_device(&qeth_ccwgroup_driver.driver, NULL, NULL, - __qeth_reboot_event_card); - return ret ? NOTIFY_BAD : NOTIFY_DONE; -} - - -static struct notifier_block qeth_reboot_notifier = { - qeth_reboot_event, - NULL, -}; - -static int -qeth_register_notifiers(void) -{ - int r; - - QETH_DBF_TEXT(trace,5,"regnotif"); - if ((r = register_reboot_notifier(&qeth_reboot_notifier))) - return r; - if ((r = register_inetaddr_notifier(&qeth_ip_notifier))) - goto out_reboot; -#ifdef CONFIG_QETH_IPV6 - if ((r = register_inet6addr_notifier(&qeth_ip6_notifier))) - goto out_ipv4; -#endif - return 0; - -#ifdef CONFIG_QETH_IPV6 -out_ipv4: - unregister_inetaddr_notifier(&qeth_ip_notifier); -#endif -out_reboot: - unregister_reboot_notifier(&qeth_reboot_notifier); - return r; -} - -/** - * unregister all event notifiers - */ -static void -qeth_unregister_notifiers(void) -{ - - QETH_DBF_TEXT(trace,5,"unregnot"); - BUG_ON(unregister_reboot_notifier(&qeth_reboot_notifier)); - BUG_ON(unregister_inetaddr_notifier(&qeth_ip_notifier)); -#ifdef CONFIG_QETH_IPV6 - BUG_ON(unregister_inet6addr_notifier(&qeth_ip6_notifier)); -#endif /* QETH_IPV6 */ - -} - -#ifdef CONFIG_QETH_IPV6 -static int -qeth_ipv6_init(void) -{ - qeth_old_arp_constructor = arp_tbl.constructor; - write_lock_bh(&arp_tbl.lock); - arp_tbl.constructor = qeth_arp_constructor; - write_unlock_bh(&arp_tbl.lock); - - arp_direct_ops = (struct neigh_ops*) - kmalloc(sizeof(struct neigh_ops), GFP_KERNEL); - if (!arp_direct_ops) - return -ENOMEM; - - memcpy(arp_direct_ops, &arp_direct_ops_template, - sizeof(struct neigh_ops)); - - return 0; -} - -static void -qeth_ipv6_uninit(void) -{ - write_lock_bh(&arp_tbl.lock); - arp_tbl.constructor = qeth_old_arp_constructor; - write_unlock_bh(&arp_tbl.lock); - kfree(arp_direct_ops); -} -#endif /* CONFIG_QETH_IPV6 */ - -static void -qeth_sysfs_unregister(void) -{ - s390_root_dev_unregister(qeth_root_dev); - qeth_remove_driver_attributes(); - ccw_driver_unregister(&qeth_ccw_driver); - ccwgroup_driver_unregister(&qeth_ccwgroup_driver); -} - -/** - * register qeth at sysfs - */ -static int -qeth_sysfs_register(void) -{ - int rc; - - rc = ccwgroup_driver_register(&qeth_ccwgroup_driver); - if (rc) - goto out; - - rc = ccw_driver_register(&qeth_ccw_driver); - if (rc) - goto out_ccw_driver; - - rc = qeth_create_driver_attributes(); - if (rc) - goto out_qeth_attr; - - qeth_root_dev = s390_root_dev_register("qeth"); - rc = IS_ERR(qeth_root_dev) ? PTR_ERR(qeth_root_dev) : 0; - if (!rc) - goto out; - - qeth_remove_driver_attributes(); -out_qeth_attr: - ccw_driver_unregister(&qeth_ccw_driver); -out_ccw_driver: - ccwgroup_driver_unregister(&qeth_ccwgroup_driver); -out: - return rc; -} - -/*** - * init function - */ -static int __init -qeth_init(void) -{ - int rc; - - PRINT_INFO("loading %s\n", version); - - INIT_LIST_HEAD(&qeth_card_list.list); - INIT_LIST_HEAD(&qeth_notify_list); - spin_lock_init(&qeth_notify_lock); - rwlock_init(&qeth_card_list.rwlock); - - rc = qeth_register_dbf_views(); - if (rc) - goto out_err; - - rc = qeth_sysfs_register(); - if (rc) - goto out_dbf; - -#ifdef CONFIG_QETH_IPV6 - rc = qeth_ipv6_init(); - if (rc) { - PRINT_ERR("Out of memory during ipv6 init code = %d\n", rc); - goto out_sysfs; - } -#endif /* QETH_IPV6 */ - rc = qeth_register_notifiers(); - if (rc) - goto out_ipv6; - rc = qeth_create_procfs_entries(); - if (rc) - goto out_notifiers; - - return rc; - -out_notifiers: - qeth_unregister_notifiers(); -out_ipv6: -#ifdef CONFIG_QETH_IPV6 - qeth_ipv6_uninit(); -out_sysfs: -#endif /* QETH_IPV6 */ - qeth_sysfs_unregister(); -out_dbf: - qeth_unregister_dbf_views(); -out_err: - PRINT_ERR("Initialization failed with code %d\n", rc); - return rc; -} - -static void -__exit qeth_exit(void) -{ - struct qeth_card *card, *tmp; - unsigned long flags; - - QETH_DBF_TEXT(trace,1, "cleanup."); - - /* - * Weed would not need to clean up our devices here, because the - * common device layer calls qeth_remove_device for each device - * as soon as we unregister our driver (done in qeth_sysfs_unregister). - * But we do cleanup here so we can do a "soft" shutdown of our cards. - * qeth_remove_device called by the common device layer would otherwise - * do a "hard" shutdown (card->use_hard_stop is set to one in - * qeth_remove_device). - */ -again: - read_lock_irqsave(&qeth_card_list.rwlock, flags); - list_for_each_entry_safe(card, tmp, &qeth_card_list.list, list){ - read_unlock_irqrestore(&qeth_card_list.rwlock, flags); - qeth_set_offline(card->gdev); - qeth_remove_device(card->gdev); - goto again; - } - read_unlock_irqrestore(&qeth_card_list.rwlock, flags); -#ifdef CONFIG_QETH_IPV6 - qeth_ipv6_uninit(); -#endif - qeth_unregister_notifiers(); - qeth_remove_procfs_entries(); - qeth_sysfs_unregister(); - qeth_unregister_dbf_views(); - printk("qeth: removed\n"); -} - -EXPORT_SYMBOL(qeth_osn_register); -EXPORT_SYMBOL(qeth_osn_deregister); -EXPORT_SYMBOL(qeth_osn_assist); -module_init(qeth_init); -module_exit(qeth_exit); -MODULE_AUTHOR("Frank Pavlic "); -MODULE_DESCRIPTION("Linux on zSeries OSA Express and HiperSockets support\n" \ - "Copyright 2000,2003 IBM Corporation\n"); - -MODULE_LICENSE("GPL"); diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c deleted file mode 100644 index f29a4bc..0000000 --- a/drivers/s390/net/qeth_mpc.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_mpc.c - * - * Linux on zSeries OSA Express and HiperSockets support - * - * Copyright 2000,2003 IBM Corporation - * Author(s): Frank Pavlic - * Thomas Spatzier - * - */ -#include -#include "qeth_mpc.h" - -unsigned char IDX_ACTIVATE_READ[]={ - 0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00, - 0x19,0x01,0x01,0x80, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0xc8,0xc1, - 0xd3,0xd3,0xd6,0xd3, 0xc5,0x40,0x00,0x00, - 0x00,0x00 -}; - -unsigned char IDX_ACTIVATE_WRITE[]={ - 0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00, - 0x15,0x01,0x01,0x80, 0x00,0x00,0x00,0x00, - 0xff,0xff,0x00,0x00, 0x00,0x00,0xc8,0xc1, - 0xd3,0xd3,0xd6,0xd3, 0xc5,0x40,0x00,0x00, - 0x00,0x00 -}; - -unsigned char CM_ENABLE[]={ - 0x00,0xe0,0x00,0x00, 0x00,0x00,0x00,0x01, - 0x00,0x00,0x00,0x14, 0x00,0x00,0x00,0x63, - 0x10,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, - 0x81,0x7e,0x00,0x01, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x24,0x00,0x23, - 0x00,0x00,0x23,0x05, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00,0x00,0x23, 0x00,0x00,0x00,0x40, - 0x00,0x0c,0x41,0x02, 0x00,0x17,0x00,0x00, - 0x00,0x00,0x00,0x00, - 0x00,0x0b,0x04,0x01, - 0x7e,0x04,0x05,0x00, 0x01,0x01,0x0f, - 0x00, - 0x0c,0x04,0x02,0xff, 0xff,0xff,0xff,0xff, - 0xff,0xff,0xff -}; - -unsigned char CM_SETUP[]={ - 0x00,0xe0,0x00,0x00, 0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0x14, 0x00,0x00,0x00,0x64, - 0x10,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, - 0x81,0x7e,0x00,0x01, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x24,0x00,0x24, - 0x00,0x00,0x24,0x05, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00,0x00,0x24, 0x00,0x00,0x00,0x40, - 0x00,0x0c,0x41,0x04, 0x00,0x18,0x00,0x00, - 0x00,0x00,0x00,0x00, - 0x00,0x09,0x04,0x04, - 0x05,0x00,0x01,0x01, 0x11, - 0x00,0x09,0x04, - 0x05,0x05,0x00,0x00, 0x00,0x00, - 0x00,0x06, - 0x04,0x06,0xc8,0x00 -}; - -unsigned char ULP_ENABLE[]={ - 0x00,0xe0,0x00,0x00, 0x00,0x00,0x00,0x03, - 0x00,0x00,0x00,0x14, 0x00,0x00,0x00,0x6b, - 0x10,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, - 0x41,0x7e,0x00,0x01, 0x00,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, 0x00,0x24,0x00,0x2b, - 0x00,0x00,0x2b,0x05, 0x20,0x01,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00,0x00,0x2b, 0x00,0x00,0x00,0x40, - 0x00,0x0c,0x41,0x02, 0x00,0x1f,0x00,0x00, - 0x00,0x00,0x00,0x00, - 0x00,0x0b,0x04,0x01, - 0x03,0x04,0x05,0x00, 0x01,0x01,0x12, - 0x00, - 0x14,0x04,0x0a,0x00, 0x20,0x00,0x00,0xff, - 0xff,0x00,0x08,0xc8, 0xe8,0xc4,0xf1,0xc7, - 0xf1,0x00,0x00 -}; - -unsigned char ULP_SETUP[]={ - 0x00,0xe0,0x00,0x00, 0x00,0x00,0x00,0x04, - 0x00,0x00,0x00,0x14, 0x00,0x00,0x00,0x6c, - 0x10,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, - 0x41,0x7e,0x00,0x01, 0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0x01, 0x00,0x24,0x00,0x2c, - 0x00,0x00,0x2c,0x05, 0x20,0x01,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00,0x00,0x2c, 0x00,0x00,0x00,0x40, - 0x00,0x0c,0x41,0x04, 0x00,0x20,0x00,0x00, - 0x00,0x00,0x00,0x00, - 0x00,0x09,0x04,0x04, - 0x05,0x00,0x01,0x01, 0x14, - 0x00,0x09,0x04, - 0x05,0x05,0x30,0x01, 0x00,0x00, - 0x00,0x06, - 0x04,0x06,0x40,0x00, - 0x00,0x08,0x04,0x0b, - 0x00,0x00,0x00,0x00 -}; - -unsigned char DM_ACT[]={ - 0x00,0xe0,0x00,0x00, 0x00,0x00,0x00,0x05, - 0x00,0x00,0x00,0x14, 0x00,0x00,0x00,0x55, - 0x10,0x00,0x00,0x01, - 0x00,0x00,0x00,0x00, - 0x41,0x7e,0x00,0x01, 0x00,0x00,0x00,0x03, - 0x00,0x00,0x00,0x02, 0x00,0x24,0x00,0x15, - 0x00,0x00,0x2c,0x05, 0x20,0x01,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00,0x00,0x15, 0x00,0x00,0x00,0x40, - 0x00,0x0c,0x43,0x60, 0x00,0x09,0x00,0x00, - 0x00,0x00,0x00,0x00, - 0x00,0x09,0x04,0x04, - 0x05,0x40,0x01,0x01, 0x00 -}; - -unsigned char IPA_PDU_HEADER[]={ - 0x00,0xe0,0x00,0x00, 0x77,0x77,0x77,0x77, - 0x00,0x00,0x00,0x14, 0x00,0x00, - (IPA_PDU_HEADER_SIZE+sizeof(struct qeth_ipa_cmd))/256, - (IPA_PDU_HEADER_SIZE+sizeof(struct qeth_ipa_cmd))%256, - 0x10,0x00,0x00,0x01, 0x00,0x00,0x00,0x00, - 0xc1,0x03,0x00,0x01, 0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00, 0x00,0x24, - sizeof(struct qeth_ipa_cmd)/256, - sizeof(struct qeth_ipa_cmd)%256, - 0x00, - sizeof(struct qeth_ipa_cmd)/256, - sizeof(struct qeth_ipa_cmd)%256, - 0x05, - 0x77,0x77,0x77,0x77, - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, - 0x01,0x00, - sizeof(struct qeth_ipa_cmd)/256, - sizeof(struct qeth_ipa_cmd)%256, - 0x00,0x00,0x00,0x40, -}; - -unsigned char WRITE_CCW[]={ - 0x01,CCW_FLAG_SLI,0,0, - 0,0,0,0 -}; - -unsigned char READ_CCW[]={ - 0x02,CCW_FLAG_SLI,0,0, - 0,0,0,0 -}; - - -struct ipa_rc_msg { - enum qeth_ipa_return_codes rc; - char *msg; -}; - -static struct ipa_rc_msg qeth_ipa_rc_msg[] = { - {IPA_RC_SUCCESS, "success"}, - {IPA_RC_NOTSUPP, "Command not supported"}, - {IPA_RC_IP_TABLE_FULL, "Add Addr IP Table Full - ipv6"}, - {IPA_RC_UNKNOWN_ERROR, "IPA command failed - reason unknown"}, - {IPA_RC_UNSUPPORTED_COMMAND, "Command not supported"}, - {IPA_RC_DUP_IPV6_REMOTE,"ipv6 address already registered remote"}, - {IPA_RC_DUP_IPV6_HOME, "ipv6 address already registered"}, - {IPA_RC_UNREGISTERED_ADDR, "Address not registered"}, - {IPA_RC_NO_ID_AVAILABLE, "No identifiers available"}, - {IPA_RC_ID_NOT_FOUND, "Identifier not found"}, - {IPA_RC_INVALID_IP_VERSION, "IP version incorrect"}, - {IPA_RC_LAN_FRAME_MISMATCH, "LAN and frame mismatch"}, - {IPA_RC_L2_UNSUPPORTED_CMD, "Unsupported layer 2 command"}, - {IPA_RC_L2_DUP_MAC, "Duplicate MAC address"}, - {IPA_RC_L2_ADDR_TABLE_FULL, "Layer2 address table full"}, - {IPA_RC_L2_DUP_LAYER3_MAC, "Duplicate with layer 3 MAC"}, - {IPA_RC_L2_GMAC_NOT_FOUND, "GMAC not found"}, - {IPA_RC_L2_MAC_NOT_FOUND, "L2 mac address not found"}, - {IPA_RC_L2_INVALID_VLAN_ID, "L2 invalid vlan id"}, - {IPA_RC_L2_DUP_VLAN_ID, "L2 duplicate vlan id"}, - {IPA_RC_L2_VLAN_ID_NOT_FOUND, "L2 vlan id not found"}, - {IPA_RC_DATA_MISMATCH, "Data field mismatch (v4/v6 mixed)"}, - {IPA_RC_INVALID_MTU_SIZE, "Invalid MTU size"}, - {IPA_RC_INVALID_LANTYPE, "Invalid LAN type"}, - {IPA_RC_INVALID_LANNUM, "Invalid LAN num"}, - {IPA_RC_DUPLICATE_IP_ADDRESS, "Address already registered"}, - {IPA_RC_IP_ADDR_TABLE_FULL, "IP address table full"}, - {IPA_RC_LAN_PORT_STATE_ERROR, "LAN port state error"}, - {IPA_RC_SETIP_NO_STARTLAN, "Setip no startlan received"}, - {IPA_RC_SETIP_ALREADY_RECEIVED, "Setip already received"}, - {IPA_RC_IP_ADDR_ALREADY_USED, "IP address already in use on LAN"}, - {IPA_RC_MULTICAST_FULL, "No task available, multicast full"}, - {IPA_RC_SETIP_INVALID_VERSION, "SETIP invalid IP version"}, - {IPA_RC_UNSUPPORTED_SUBCMD, "Unsupported assist subcommand"}, - {IPA_RC_ARP_ASSIST_NO_ENABLE, "Only partial success, no enable"}, - {IPA_RC_PRIMARY_ALREADY_DEFINED,"Primary already defined"}, - {IPA_RC_SECOND_ALREADY_DEFINED, "Secondary already defined"}, - {IPA_RC_INVALID_SETRTG_INDICATOR,"Invalid SETRTG indicator"}, - {IPA_RC_MC_ADDR_ALREADY_DEFINED,"Multicast address already defined"}, - {IPA_RC_LAN_OFFLINE, "STRTLAN_LAN_DISABLED - LAN offline"}, - {IPA_RC_INVALID_IP_VERSION2, "Invalid IP version"}, - {IPA_RC_FFFF, "Unknown Error"} -}; - - - -char * -qeth_get_ipa_msg(enum qeth_ipa_return_codes rc) -{ - int x = 0; - qeth_ipa_rc_msg[sizeof(qeth_ipa_rc_msg) / - sizeof(struct ipa_rc_msg) - 1].rc = rc; - while(qeth_ipa_rc_msg[x].rc != rc) - x++; - return qeth_ipa_rc_msg[x].msg; -} - - -struct ipa_cmd_names { - enum qeth_ipa_cmds cmd; - char *name; -}; - -static struct ipa_cmd_names qeth_ipa_cmd_names[] = { - {IPA_CMD_STARTLAN, "startlan"}, - {IPA_CMD_STOPLAN, "stoplan"}, - {IPA_CMD_SETVMAC, "setvmac"}, - {IPA_CMD_DELVMAC, "delvmca"}, - {IPA_CMD_SETGMAC, "setgmac"}, - {IPA_CMD_DELGMAC, "delgmac"}, - {IPA_CMD_SETVLAN, "setvlan"}, - {IPA_CMD_DELVLAN, "delvlan"}, - {IPA_CMD_SETCCID, "setccid"}, - {IPA_CMD_DELCCID, "delccid"}, - {IPA_CMD_MODCCID, "setip"}, - {IPA_CMD_SETIP, "setip"}, - {IPA_CMD_QIPASSIST, "qipassist"}, - {IPA_CMD_SETASSPARMS, "setassparms"}, - {IPA_CMD_SETIPM, "setipm"}, - {IPA_CMD_DELIPM, "delipm"}, - {IPA_CMD_SETRTG, "setrtg"}, - {IPA_CMD_DELIP, "delip"}, - {IPA_CMD_SETADAPTERPARMS, "setadapterparms"}, - {IPA_CMD_SET_DIAG_ASS, "set_diag_ass"}, - {IPA_CMD_CREATE_ADDR, "create_addr"}, - {IPA_CMD_DESTROY_ADDR, "destroy_addr"}, - {IPA_CMD_REGISTER_LOCAL_ADDR, "register_local_addr"}, - {IPA_CMD_UNREGISTER_LOCAL_ADDR, "unregister_local_addr"}, - {IPA_CMD_UNKNOWN, "unknown"}, -}; - -char * -qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd) -{ - int x = 0; - qeth_ipa_cmd_names[ - sizeof(qeth_ipa_cmd_names)/ - sizeof(struct ipa_cmd_names)-1].cmd = cmd; - while(qeth_ipa_cmd_names[x].cmd != cmd) - x++; - return qeth_ipa_cmd_names[x].name; -} - - diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h deleted file mode 100644 index 6de2da5..0000000 --- a/drivers/s390/net/qeth_mpc.h +++ /dev/null @@ -1,583 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_mpc.h - * - * Linux on zSeries OSA Express and HiperSockets support - * - * Copyright 2000,2003 IBM Corporation - * Author(s): Utz Bacher - * Thomas Spatzier - * Frank Pavlic - * - */ -#ifndef __QETH_MPC_H__ -#define __QETH_MPC_H__ - -#include - -#define IPA_PDU_HEADER_SIZE 0x40 -#define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer+0x0e) -#define QETH_IPA_PDU_LEN_PDU1(buffer) (buffer+0x26) -#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer+0x29) -#define QETH_IPA_PDU_LEN_PDU3(buffer) (buffer+0x3a) - -extern unsigned char IPA_PDU_HEADER[]; -#define QETH_IPA_CMD_DEST_ADDR(buffer) (buffer+0x2c) - -#define IPA_CMD_LENGTH (IPA_PDU_HEADER_SIZE + sizeof(struct qeth_ipa_cmd)) - -#define QETH_SEQ_NO_LENGTH 4 -#define QETH_MPC_TOKEN_LENGTH 4 -#define QETH_MCL_LENGTH 4 -#define OSA_ADDR_LEN 6 - -#define QETH_TIMEOUT (10 * HZ) -#define QETH_IPA_TIMEOUT (45 * HZ) -#define QETH_IDX_COMMAND_SEQNO 0xffff0000 -#define SR_INFO_LEN 16 - -#define QETH_CLEAR_CHANNEL_PARM -10 -#define QETH_HALT_CHANNEL_PARM -11 -#define QETH_RCD_PARM -12 - -/*****************************************************************************/ -/* IP Assist related definitions */ -/*****************************************************************************/ -#define IPA_CMD_INITIATOR_HOST 0x00 -#define IPA_CMD_INITIATOR_OSA 0x01 -#define IPA_CMD_INITIATOR_HOST_REPLY 0x80 -#define IPA_CMD_INITIATOR_OSA_REPLY 0x81 -#define IPA_CMD_PRIM_VERSION_NO 0x01 - -enum qeth_card_types { - QETH_CARD_TYPE_UNKNOWN = 0, - QETH_CARD_TYPE_OSAE = 10, - QETH_CARD_TYPE_IQD = 1234, - QETH_CARD_TYPE_OSN = 11, -}; - -#define QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE 0x18 -/* only the first two bytes are looked at in qeth_get_cardname_short */ -enum qeth_link_types { - QETH_LINK_TYPE_FAST_ETH = 0x01, - QETH_LINK_TYPE_HSTR = 0x02, - QETH_LINK_TYPE_GBIT_ETH = 0x03, - QETH_LINK_TYPE_OSN = 0x04, - QETH_LINK_TYPE_10GBIT_ETH = 0x10, - QETH_LINK_TYPE_LANE_ETH100 = 0x81, - QETH_LINK_TYPE_LANE_TR = 0x82, - QETH_LINK_TYPE_LANE_ETH1000 = 0x83, - QETH_LINK_TYPE_LANE = 0x88, - QETH_LINK_TYPE_ATM_NATIVE = 0x90, -}; - -enum qeth_tr_macaddr_modes { - QETH_TR_MACADDR_NONCANONICAL = 0, - QETH_TR_MACADDR_CANONICAL = 1, -}; - -enum qeth_tr_broadcast_modes { - QETH_TR_BROADCAST_ALLRINGS = 0, - QETH_TR_BROADCAST_LOCAL = 1, -}; - -/* these values match CHECKSUM_* in include/linux/skbuff.h */ -enum qeth_checksum_types { - SW_CHECKSUMMING = 0, /* TODO: set to bit flag used in IPA Command */ - HW_CHECKSUMMING = 1, - NO_CHECKSUMMING = 2, -}; -#define QETH_CHECKSUM_DEFAULT SW_CHECKSUMMING - -/* - * Routing stuff - */ -#define RESET_ROUTING_FLAG 0x10 /* indicate that routing type shall be set */ -enum qeth_routing_types { - NO_ROUTER = 0, /* TODO: set to bit flag used in IPA Command */ - PRIMARY_ROUTER = 1, - SECONDARY_ROUTER = 2, - MULTICAST_ROUTER = 3, - PRIMARY_CONNECTOR = 4, - SECONDARY_CONNECTOR = 5, -}; - -/* IPA Commands */ -enum qeth_ipa_cmds { - IPA_CMD_STARTLAN = 0x01, - IPA_CMD_STOPLAN = 0x02, - IPA_CMD_SETVMAC = 0x21, - IPA_CMD_DELVMAC = 0x22, - IPA_CMD_SETGMAC = 0x23, - IPA_CMD_DELGMAC = 0x24, - IPA_CMD_SETVLAN = 0x25, - IPA_CMD_DELVLAN = 0x26, - IPA_CMD_SETCCID = 0x41, - IPA_CMD_DELCCID = 0x42, - IPA_CMD_MODCCID = 0x43, - IPA_CMD_SETIP = 0xb1, - IPA_CMD_QIPASSIST = 0xb2, - IPA_CMD_SETASSPARMS = 0xb3, - IPA_CMD_SETIPM = 0xb4, - IPA_CMD_DELIPM = 0xb5, - IPA_CMD_SETRTG = 0xb6, - IPA_CMD_DELIP = 0xb7, - IPA_CMD_SETADAPTERPARMS = 0xb8, - IPA_CMD_SET_DIAG_ASS = 0xb9, - IPA_CMD_CREATE_ADDR = 0xc3, - IPA_CMD_DESTROY_ADDR = 0xc4, - IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1, - IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2, - IPA_CMD_UNKNOWN = 0x00 -}; - -enum qeth_ip_ass_cmds { - IPA_CMD_ASS_START = 0x0001, - IPA_CMD_ASS_STOP = 0x0002, - IPA_CMD_ASS_CONFIGURE = 0x0003, - IPA_CMD_ASS_ENABLE = 0x0004, -}; - -enum qeth_arp_process_subcmds { - IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003, - IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004, - IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005, - IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006, - IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007, - IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104, - IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204, -}; - - -/* Return Codes for IPA Commands - * according to OSA card Specs */ - -enum qeth_ipa_return_codes { - IPA_RC_SUCCESS = 0x0000, - IPA_RC_NOTSUPP = 0x0001, - IPA_RC_IP_TABLE_FULL = 0x0002, - IPA_RC_UNKNOWN_ERROR = 0x0003, - IPA_RC_UNSUPPORTED_COMMAND = 0x0004, - IPA_RC_DUP_IPV6_REMOTE = 0x0008, - IPA_RC_DUP_IPV6_HOME = 0x0010, - IPA_RC_UNREGISTERED_ADDR = 0x0011, - IPA_RC_NO_ID_AVAILABLE = 0x0012, - IPA_RC_ID_NOT_FOUND = 0x0013, - IPA_RC_INVALID_IP_VERSION = 0x0020, - IPA_RC_LAN_FRAME_MISMATCH = 0x0040, - IPA_RC_L2_UNSUPPORTED_CMD = 0x2003, - IPA_RC_L2_DUP_MAC = 0x2005, - IPA_RC_L2_ADDR_TABLE_FULL = 0x2006, - IPA_RC_L2_DUP_LAYER3_MAC = 0x200a, - IPA_RC_L2_GMAC_NOT_FOUND = 0x200b, - IPA_RC_L2_MAC_NOT_FOUND = 0x2010, - IPA_RC_L2_INVALID_VLAN_ID = 0x2015, - IPA_RC_L2_DUP_VLAN_ID = 0x2016, - IPA_RC_L2_VLAN_ID_NOT_FOUND = 0x2017, - IPA_RC_DATA_MISMATCH = 0xe001, - IPA_RC_INVALID_MTU_SIZE = 0xe002, - IPA_RC_INVALID_LANTYPE = 0xe003, - IPA_RC_INVALID_LANNUM = 0xe004, - IPA_RC_DUPLICATE_IP_ADDRESS = 0xe005, - IPA_RC_IP_ADDR_TABLE_FULL = 0xe006, - IPA_RC_LAN_PORT_STATE_ERROR = 0xe007, - IPA_RC_SETIP_NO_STARTLAN = 0xe008, - IPA_RC_SETIP_ALREADY_RECEIVED = 0xe009, - IPA_RC_IP_ADDR_ALREADY_USED = 0xe00a, - IPA_RC_MULTICAST_FULL = 0xe00b, - IPA_RC_SETIP_INVALID_VERSION = 0xe00d, - IPA_RC_UNSUPPORTED_SUBCMD = 0xe00e, - IPA_RC_ARP_ASSIST_NO_ENABLE = 0xe00f, - IPA_RC_PRIMARY_ALREADY_DEFINED = 0xe010, - IPA_RC_SECOND_ALREADY_DEFINED = 0xe011, - IPA_RC_INVALID_SETRTG_INDICATOR = 0xe012, - IPA_RC_MC_ADDR_ALREADY_DEFINED = 0xe013, - IPA_RC_LAN_OFFLINE = 0xe080, - IPA_RC_INVALID_IP_VERSION2 = 0xf001, - IPA_RC_FFFF = 0xffff -}; - -/* IPA function flags; each flag marks availability of respective function */ -enum qeth_ipa_funcs { - IPA_ARP_PROCESSING = 0x00000001L, - IPA_INBOUND_CHECKSUM = 0x00000002L, - IPA_OUTBOUND_CHECKSUM = 0x00000004L, - IPA_IP_FRAGMENTATION = 0x00000008L, - IPA_FILTERING = 0x00000010L, - IPA_IPV6 = 0x00000020L, - IPA_MULTICASTING = 0x00000040L, - IPA_IP_REASSEMBLY = 0x00000080L, - IPA_QUERY_ARP_COUNTERS = 0x00000100L, - IPA_QUERY_ARP_ADDR_INFO = 0x00000200L, - IPA_SETADAPTERPARMS = 0x00000400L, - IPA_VLAN_PRIO = 0x00000800L, - IPA_PASSTHRU = 0x00001000L, - IPA_FLUSH_ARP_SUPPORT = 0x00002000L, - IPA_FULL_VLAN = 0x00004000L, - IPA_INBOUND_PASSTHRU = 0x00008000L, - IPA_SOURCE_MAC = 0x00010000L, - IPA_OSA_MC_ROUTER = 0x00020000L, - IPA_QUERY_ARP_ASSIST = 0x00040000L, - IPA_INBOUND_TSO = 0x00080000L, - IPA_OUTBOUND_TSO = 0x00100000L, -}; - -/* SETIP/DELIP IPA Command: ***************************************************/ -enum qeth_ipa_setdelip_flags { - QETH_IPA_SETDELIP_DEFAULT = 0x00L, /* default */ - QETH_IPA_SETIP_VIPA_FLAG = 0x01L, /* no grat. ARP */ - QETH_IPA_SETIP_TAKEOVER_FLAG = 0x02L, /* nofail on grat. ARP */ - QETH_IPA_DELIP_ADDR_2_B_TAKEN_OVER = 0x20L, - QETH_IPA_DELIP_VIPA_FLAG = 0x40L, - QETH_IPA_DELIP_ADDR_NEEDS_SETIP = 0x80L, -}; - -/* SETADAPTER IPA Command: ****************************************************/ -enum qeth_ipa_setadp_cmd { - IPA_SETADP_QUERY_COMMANDS_SUPPORTED = 0x01, - IPA_SETADP_ALTER_MAC_ADDRESS = 0x02, - IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x04, - IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x08, - IPA_SETADP_SET_ADDRESSING_MODE = 0x10, - IPA_SETADP_SET_CONFIG_PARMS = 0x20, - IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x40, - IPA_SETADP_SET_BROADCAST_MODE = 0x80, - IPA_SETADP_SEND_OSA_MESSAGE = 0x0100, - IPA_SETADP_SET_SNMP_CONTROL = 0x0200, - IPA_SETADP_QUERY_CARD_INFO = 0x0400, - IPA_SETADP_SET_PROMISC_MODE = 0x0800, -}; -enum qeth_ipa_mac_ops { - CHANGE_ADDR_READ_MAC = 0, - CHANGE_ADDR_REPLACE_MAC = 1, - CHANGE_ADDR_ADD_MAC = 2, - CHANGE_ADDR_DEL_MAC = 4, - CHANGE_ADDR_RESET_MAC = 8, -}; -enum qeth_ipa_addr_ops { - CHANGE_ADDR_READ_ADDR = 0, - CHANGE_ADDR_ADD_ADDR = 1, - CHANGE_ADDR_DEL_ADDR = 2, - CHANGE_ADDR_FLUSH_ADDR_TABLE = 4, -}; -enum qeth_ipa_promisc_modes { - SET_PROMISC_MODE_OFF = 0, - SET_PROMISC_MODE_ON = 1, -}; - -/* (SET)DELIP(M) IPA stuff ***************************************************/ -struct qeth_ipacmd_setdelip4 { - __u8 ip_addr[4]; - __u8 mask[4]; - __u32 flags; -} __attribute__ ((packed)); - -struct qeth_ipacmd_setdelip6 { - __u8 ip_addr[16]; - __u8 mask[16]; - __u32 flags; -} __attribute__ ((packed)); - -struct qeth_ipacmd_setdelipm { - __u8 mac[6]; - __u8 padding[2]; - __u8 ip6[12]; - __u8 ip4[4]; -} __attribute__ ((packed)); - -struct qeth_ipacmd_layer2setdelmac { - __u32 mac_length; - __u8 mac[6]; -} __attribute__ ((packed)); - -struct qeth_ipacmd_layer2setdelvlan { - __u16 vlan_id; -} __attribute__ ((packed)); - - -struct qeth_ipacmd_setassparms_hdr { - __u32 assist_no; - __u16 length; - __u16 command_code; - __u16 return_code; - __u8 number_of_replies; - __u8 seq_no; -} __attribute__((packed)); - -struct qeth_arp_query_data { - __u16 request_bits; - __u16 reply_bits; - __u32 no_entries; - char data; -} __attribute__((packed)); - -/* used as parameter for arp_query reply */ -struct qeth_arp_query_info { - __u32 udata_len; - __u16 mask_bits; - __u32 udata_offset; - __u32 no_entries; - char *udata; -}; - -/* SETASSPARMS IPA Command: */ -struct qeth_ipacmd_setassparms { - struct qeth_ipacmd_setassparms_hdr hdr; - union { - __u32 flags_32bit; - struct qeth_arp_cache_entry add_arp_entry; - struct qeth_arp_query_data query_arp; - __u8 ip[16]; - } data; -} __attribute__ ((packed)); - - -/* SETRTG IPA Command: ****************************************************/ -struct qeth_set_routing { - __u8 type; -}; - -/* SETADAPTERPARMS IPA Command: *******************************************/ -struct qeth_query_cmds_supp { - __u32 no_lantypes_supp; - __u8 lan_type; - __u8 reserved1[3]; - __u32 supported_cmds; - __u8 reserved2[8]; -} __attribute__ ((packed)); - -struct qeth_change_addr { - __u32 cmd; - __u32 addr_size; - __u32 no_macs; - __u8 addr[OSA_ADDR_LEN]; -} __attribute__ ((packed)); - - -struct qeth_snmp_cmd { - __u8 token[16]; - __u32 request; - __u32 interface; - __u32 returncode; - __u32 firmwarelevel; - __u32 seqno; - __u8 data; -} __attribute__ ((packed)); - -struct qeth_snmp_ureq_hdr { - __u32 data_len; - __u32 req_len; - __u32 reserved1; - __u32 reserved2; -} __attribute__ ((packed)); - -struct qeth_snmp_ureq { - struct qeth_snmp_ureq_hdr hdr; - struct qeth_snmp_cmd cmd; -} __attribute__((packed)); - -struct qeth_ipacmd_setadpparms_hdr { - __u32 supp_hw_cmds; - __u32 reserved1; - __u16 cmdlength; - __u16 reserved2; - __u32 command_code; - __u16 return_code; - __u8 used_total; - __u8 seq_no; - __u32 reserved3; -} __attribute__ ((packed)); - -struct qeth_ipacmd_setadpparms { - struct qeth_ipacmd_setadpparms_hdr hdr; - union { - struct qeth_query_cmds_supp query_cmds_supp; - struct qeth_change_addr change_addr; - struct qeth_snmp_cmd snmp; - __u32 mode; - } data; -} __attribute__ ((packed)); - -/* IPFRAME IPA Command: ***************************************************/ -/* TODO: define in analogy to commands define above */ - -/* ADD_ADDR_ENTRY IPA Command: ********************************************/ -/* TODO: define in analogy to commands define above */ - -/* DELETE_ADDR_ENTRY IPA Command: *****************************************/ -/* TODO: define in analogy to commands define above */ - -/* CREATE_ADDR IPA Command: ***********************************************/ -struct qeth_create_destroy_address { - __u8 unique_id[8]; -} __attribute__ ((packed)); - -/* REGISTER_LOCAL_ADDR IPA Command: ***************************************/ -/* TODO: define in analogy to commands define above */ - -/* UNREGISTER_LOCAL_ADDR IPA Command: *************************************/ -/* TODO: define in analogy to commands define above */ - -/* Header for each IPA command */ -struct qeth_ipacmd_hdr { - __u8 command; - __u8 initiator; - __u16 seqno; - __u16 return_code; - __u8 adapter_type; - __u8 rel_adapter_no; - __u8 prim_version_no; - __u8 param_count; - __u16 prot_version; - __u32 ipa_supported; - __u32 ipa_enabled; -} __attribute__ ((packed)); - -/* The IPA command itself */ -struct qeth_ipa_cmd { - struct qeth_ipacmd_hdr hdr; - union { - struct qeth_ipacmd_setdelip4 setdelip4; - struct qeth_ipacmd_setdelip6 setdelip6; - struct qeth_ipacmd_setdelipm setdelipm; - struct qeth_ipacmd_setassparms setassparms; - struct qeth_ipacmd_layer2setdelmac setdelmac; - struct qeth_ipacmd_layer2setdelvlan setdelvlan; - struct qeth_create_destroy_address create_destroy_addr; - struct qeth_ipacmd_setadpparms setadapterparms; - struct qeth_set_routing setrtg; - } data; -} __attribute__ ((packed)); - -/* - * special command for ARP processing. - * this is not included in setassparms command before, because we get - * problem with the size of struct qeth_ipacmd_setassparms otherwise - */ -enum qeth_ipa_arp_return_codes { - QETH_IPA_ARP_RC_SUCCESS = 0x0000, - QETH_IPA_ARP_RC_FAILED = 0x0001, - QETH_IPA_ARP_RC_NOTSUPP = 0x0002, - QETH_IPA_ARP_RC_OUT_OF_RANGE = 0x0003, - QETH_IPA_ARP_RC_Q_NOTSUPP = 0x0004, - QETH_IPA_ARP_RC_Q_NO_DATA = 0x0008, -}; - - -extern char * -qeth_get_ipa_msg(enum qeth_ipa_return_codes rc); -extern char * -qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd); - -#define QETH_SETASS_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \ - sizeof(struct qeth_ipacmd_setassparms_hdr)) -#define QETH_IPA_ARP_DATA_POS(buffer) (buffer + IPA_PDU_HEADER_SIZE + \ - QETH_SETASS_BASE_LEN) -#define QETH_SETADP_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \ - sizeof(struct qeth_ipacmd_setadpparms_hdr)) -#define QETH_SNMP_SETADP_CMDLENGTH 16 - -#define QETH_ARP_DATA_SIZE 3968 -#define QETH_ARP_CMD_LEN (QETH_ARP_DATA_SIZE + 8) -/* Helper functions */ -#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \ - (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY)) - -/*****************************************************************************/ -/* END OF IP Assist related definitions */ -/*****************************************************************************/ - - -extern unsigned char WRITE_CCW[]; -extern unsigned char READ_CCW[]; - -extern unsigned char CM_ENABLE[]; -#define CM_ENABLE_SIZE 0x63 -#define QETH_CM_ENABLE_ISSUER_RM_TOKEN(buffer) (buffer+0x2c) -#define QETH_CM_ENABLE_FILTER_TOKEN(buffer) (buffer+0x53) -#define QETH_CM_ENABLE_USER_DATA(buffer) (buffer+0x5b) - -#define QETH_CM_ENABLE_RESP_FILTER_TOKEN(buffer) \ - (PDU_ENCAPSULATION(buffer)+ 0x13) - - -extern unsigned char CM_SETUP[]; -#define CM_SETUP_SIZE 0x64 -#define QETH_CM_SETUP_DEST_ADDR(buffer) (buffer+0x2c) -#define QETH_CM_SETUP_CONNECTION_TOKEN(buffer) (buffer+0x51) -#define QETH_CM_SETUP_FILTER_TOKEN(buffer) (buffer+0x5a) - -#define QETH_CM_SETUP_RESP_DEST_ADDR(buffer) \ - (PDU_ENCAPSULATION(buffer) + 0x1a) - -extern unsigned char ULP_ENABLE[]; -#define ULP_ENABLE_SIZE 0x6b -#define QETH_ULP_ENABLE_LINKNUM(buffer) (buffer+0x61) -#define QETH_ULP_ENABLE_DEST_ADDR(buffer) (buffer+0x2c) -#define QETH_ULP_ENABLE_FILTER_TOKEN(buffer) (buffer+0x53) -#define QETH_ULP_ENABLE_PORTNAME_AND_LL(buffer) (buffer+0x62) -#define QETH_ULP_ENABLE_RESP_FILTER_TOKEN(buffer) \ - (PDU_ENCAPSULATION(buffer) + 0x13) -#define QETH_ULP_ENABLE_RESP_MAX_MTU(buffer) \ - (PDU_ENCAPSULATION(buffer)+ 0x1f) -#define QETH_ULP_ENABLE_RESP_DIFINFO_LEN(buffer) \ - (PDU_ENCAPSULATION(buffer) + 0x17) -#define QETH_ULP_ENABLE_RESP_LINK_TYPE(buffer) \ - (PDU_ENCAPSULATION(buffer)+ 0x2b) -/* Layer 2 defintions */ -#define QETH_PROT_LAYER2 0x08 -#define QETH_PROT_TCPIP 0x03 -#define QETH_PROT_OSN2 0x0a -#define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50) -#define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19) - -extern unsigned char ULP_SETUP[]; -#define ULP_SETUP_SIZE 0x6c -#define QETH_ULP_SETUP_DEST_ADDR(buffer) (buffer+0x2c) -#define QETH_ULP_SETUP_CONNECTION_TOKEN(buffer) (buffer+0x51) -#define QETH_ULP_SETUP_FILTER_TOKEN(buffer) (buffer+0x5a) -#define QETH_ULP_SETUP_CUA(buffer) (buffer+0x68) -#define QETH_ULP_SETUP_REAL_DEVADDR(buffer) (buffer+0x6a) - -#define QETH_ULP_SETUP_RESP_CONNECTION_TOKEN(buffer) \ - (PDU_ENCAPSULATION(buffer)+0x1a) - - -extern unsigned char DM_ACT[]; -#define DM_ACT_SIZE 0x55 -#define QETH_DM_ACT_DEST_ADDR(buffer) (buffer+0x2c) -#define QETH_DM_ACT_CONNECTION_TOKEN(buffer) (buffer+0x51) - - - -#define QETH_TRANSPORT_HEADER_SEQ_NO(buffer) (buffer+4) -#define QETH_PDU_HEADER_SEQ_NO(buffer) (buffer+0x1c) -#define QETH_PDU_HEADER_ACK_SEQ_NO(buffer) (buffer+0x20) - -extern unsigned char IDX_ACTIVATE_READ[]; -extern unsigned char IDX_ACTIVATE_WRITE[]; - -#define IDX_ACTIVATE_SIZE 0x22 -#define QETH_IDX_ACT_ISSUER_RM_TOKEN(buffer) (buffer+0x0c) -#define QETH_IDX_NO_PORTNAME_REQUIRED(buffer) ((buffer)[0x0b]&0x80) -#define QETH_IDX_ACT_FUNC_LEVEL(buffer) (buffer+0x10) -#define QETH_IDX_ACT_DATASET_NAME(buffer) (buffer+0x16) -#define QETH_IDX_ACT_QDIO_DEV_CUA(buffer) (buffer+0x1e) -#define QETH_IDX_ACT_QDIO_DEV_REALADDR(buffer) (buffer+0x20) -#define QETH_IS_IDX_ACT_POS_REPLY(buffer) (((buffer)[0x08]&3)==2) -#define QETH_IDX_REPLY_LEVEL(buffer) (buffer+0x12) -#define QETH_IDX_ACT_CAUSE_CODE(buffer) (buffer)[0x09] - -#define PDU_ENCAPSULATION(buffer) \ - (buffer + *(buffer + (*(buffer+0x0b)) + \ - *(buffer + *(buffer+0x0b)+0x11) +0x07)) - -#define IS_IPA(buffer) \ - ((buffer) && \ - ( *(buffer + ((*(buffer+0x0b))+4) )==0xc1) ) - -#define ADDR_FRAME_TYPE_DIX 1 -#define ADDR_FRAME_TYPE_802_3 2 -#define ADDR_FRAME_TYPE_TR_WITHOUT_SR 0x10 -#define ADDR_FRAME_TYPE_TR_WITH_SR 0x20 - -#endif diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c deleted file mode 100644 index 46ecd03..0000000 --- a/drivers/s390/net/qeth_proc.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * - * linux/drivers/s390/net/qeth_fs.c - * - * Linux on zSeries OSA Express and HiperSockets support - * This file contains code related to procfs. - * - * Copyright 2000,2003 IBM Corporation - * - * Author(s): Thomas Spatzier - * - */ -#include -#include -#include -#include -#include -#include - -#include "qeth.h" -#include "qeth_mpc.h" -#include "qeth_fs.h" - -/***** /proc/qeth *****/ -#define QETH_PROCFILE_NAME "qeth" -static struct proc_dir_entry *qeth_procfile; - -static int -qeth_procfile_seq_match(struct device *dev, void *data) -{ - return(dev ? 1 : 0); -} - -static void * -qeth_procfile_seq_start(struct seq_file *s, loff_t *offset) -{ - struct device *dev = NULL; - loff_t nr = 0; - - if (*offset == 0) - return SEQ_START_TOKEN; - while (1) { - dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, - NULL, qeth_procfile_seq_match); - if (++nr == *offset) - break; - put_device(dev); - } - return dev; -} - -static void -qeth_procfile_seq_stop(struct seq_file *s, void* it) -{ -} - -static void * -qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) -{ - struct device *prev, *next; - - if (it == SEQ_START_TOKEN) - prev = NULL; - else - prev = (struct device *) it; - next = driver_find_device(&qeth_ccwgroup_driver.driver, - prev, NULL, qeth_procfile_seq_match); - (*offset)++; - return (void *) next; -} - -static inline const char * -qeth_get_router_str(struct qeth_card *card, int ipv) -{ - enum qeth_routing_types routing_type = NO_ROUTER; - - if (ipv == 4) { - routing_type = card->options.route4.type; - } else { -#ifdef CONFIG_QETH_IPV6 - routing_type = card->options.route6.type; -#else - return "n/a"; -#endif /* CONFIG_QETH_IPV6 */ - } - - switch (routing_type){ - case PRIMARY_ROUTER: - return "pri"; - case SECONDARY_ROUTER: - return "sec"; - case MULTICAST_ROUTER: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return "mc+"; - return "mc"; - case PRIMARY_CONNECTOR: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return "p+c"; - return "p.c"; - case SECONDARY_CONNECTOR: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return "s+c"; - return "s.c"; - default: /* NO_ROUTER */ - return "no"; - } -} - -static int -qeth_procfile_seq_show(struct seq_file *s, void *it) -{ - struct device *device; - struct qeth_card *card; - char tmp[12]; /* for qeth_get_prioq_str */ - - if (it == SEQ_START_TOKEN){ - seq_printf(s, "devices CHPID interface " - "cardtype port chksum prio-q'ing rtr4 " - "rtr6 fsz cnt\n"); - seq_printf(s, "-------------------------- ----- ---------- " - "-------------- ---- ------ ---------- ---- " - "---- ----- -----\n"); - } else { - device = (struct device *) it; - card = device->driver_data; - seq_printf(s, "%s/%s/%s x%02X %-10s %-14s %-4i ", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card), - card->info.chpid, - QETH_CARD_IFNAME(card), - qeth_get_cardname_short(card), - card->info.portno); - if (card->lan_online) - seq_printf(s, "%-6s %-10s %-4s %-4s %-5s %-5i\n", - qeth_get_checksum_str(card), - qeth_get_prioq_str(card, tmp), - qeth_get_router_str(card, 4), - qeth_get_router_str(card, 6), - qeth_get_bufsize_str(card), - card->qdio.in_buf_pool.buf_count); - else - seq_printf(s, " +++ LAN OFFLINE +++\n"); - put_device(device); - } - return 0; -} - -static const struct seq_operations qeth_procfile_seq_ops = { - .start = qeth_procfile_seq_start, - .stop = qeth_procfile_seq_stop, - .next = qeth_procfile_seq_next, - .show = qeth_procfile_seq_show, -}; - -static int -qeth_procfile_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &qeth_procfile_seq_ops); -} - -static const struct file_operations qeth_procfile_fops = { - .owner = THIS_MODULE, - .open = qeth_procfile_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -/***** /proc/qeth_perf *****/ -#define QETH_PERF_PROCFILE_NAME "qeth_perf" -static struct proc_dir_entry *qeth_perf_procfile; - -static int -qeth_perf_procfile_seq_show(struct seq_file *s, void *it) -{ - struct device *device; - struct qeth_card *card; - - - if (it == SEQ_START_TOKEN) - return 0; - - device = (struct device *) it; - card = device->driver_data; - seq_printf(s, "For card with devnos %s/%s/%s (%s):\n", - CARD_RDEV_ID(card), - CARD_WDEV_ID(card), - CARD_DDEV_ID(card), - QETH_CARD_IFNAME(card) - ); - if (!card->options.performance_stats) - seq_printf(s, "Performance statistics are deactivated.\n"); - seq_printf(s, " Skb's/buffers received : %lu/%u\n" - " Skb's/buffers sent : %lu/%u\n\n", - card->stats.rx_packets - - card->perf_stats.initial_rx_packets, - card->perf_stats.bufs_rec, - card->stats.tx_packets - - card->perf_stats.initial_tx_packets, - card->perf_stats.bufs_sent - ); - seq_printf(s, " Skb's/buffers sent without packing : %lu/%u\n" - " Skb's/buffers sent with packing : %u/%u\n\n", - card->stats.tx_packets - card->perf_stats.initial_tx_packets - - card->perf_stats.skbs_sent_pack, - card->perf_stats.bufs_sent - card->perf_stats.bufs_sent_pack, - card->perf_stats.skbs_sent_pack, - card->perf_stats.bufs_sent_pack - ); - seq_printf(s, " Skbs sent in SG mode : %u\n" - " Skb fragments sent in SG mode : %u\n\n", - card->perf_stats.sg_skbs_sent, - card->perf_stats.sg_frags_sent); - seq_printf(s, " Skbs received in SG mode : %u\n" - " Skb fragments received in SG mode : %u\n" - " Page allocations for rx SG mode : %u\n\n", - card->perf_stats.sg_skbs_rx, - card->perf_stats.sg_frags_rx, - card->perf_stats.sg_alloc_page_rx); - seq_printf(s, " large_send tx (in Kbytes) : %u\n" - " large_send count : %u\n\n", - card->perf_stats.large_send_bytes >> 10, - card->perf_stats.large_send_cnt); - seq_printf(s, " Packing state changes no pkg.->packing : %u/%u\n" - " Watermarks L/H : %i/%i\n" - " Current buffer usage (outbound q's) : " - "%i/%i/%i/%i\n\n", - card->perf_stats.sc_dp_p, card->perf_stats.sc_p_dp, - QETH_LOW_WATERMARK_PACK, QETH_HIGH_WATERMARK_PACK, - atomic_read(&card->qdio.out_qs[0]->used_buffers), - (card->qdio.no_out_queues > 1)? - atomic_read(&card->qdio.out_qs[1]->used_buffers) - : 0, - (card->qdio.no_out_queues > 2)? - atomic_read(&card->qdio.out_qs[2]->used_buffers) - : 0, - (card->qdio.no_out_queues > 3)? - atomic_read(&card->qdio.out_qs[3]->used_buffers) - : 0 - ); - seq_printf(s, " Inbound handler time (in us) : %u\n" - " Inbound handler count : %u\n" - " Inbound do_QDIO time (in us) : %u\n" - " Inbound do_QDIO count : %u\n\n" - " Outbound handler time (in us) : %u\n" - " Outbound handler count : %u\n\n" - " Outbound time (in us, incl QDIO) : %u\n" - " Outbound count : %u\n" - " Outbound do_QDIO time (in us) : %u\n" - " Outbound do_QDIO count : %u\n\n", - card->perf_stats.inbound_time, - card->perf_stats.inbound_cnt, - card->perf_stats.inbound_do_qdio_time, - card->perf_stats.inbound_do_qdio_cnt, - card->perf_stats.outbound_handler_time, - card->perf_stats.outbound_handler_cnt, - card->perf_stats.outbound_time, - card->perf_stats.outbound_cnt, - card->perf_stats.outbound_do_qdio_time, - card->perf_stats.outbound_do_qdio_cnt - ); - put_device(device); - return 0; -} - -static const struct seq_operations qeth_perf_procfile_seq_ops = { - .start = qeth_procfile_seq_start, - .stop = qeth_procfile_seq_stop, - .next = qeth_procfile_seq_next, - .show = qeth_perf_procfile_seq_show, -}; - -static int -qeth_perf_procfile_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &qeth_perf_procfile_seq_ops); -} - -static const struct file_operations qeth_perf_procfile_fops = { - .owner = THIS_MODULE, - .open = qeth_perf_procfile_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -int __init -qeth_create_procfs_entries(void) -{ - qeth_procfile = create_proc_entry(QETH_PROCFILE_NAME, - S_IFREG | 0444, NULL); - if (qeth_procfile) - qeth_procfile->proc_fops = &qeth_procfile_fops; - - qeth_perf_procfile = create_proc_entry(QETH_PERF_PROCFILE_NAME, - S_IFREG | 0444, NULL); - if (qeth_perf_procfile) - qeth_perf_procfile->proc_fops = &qeth_perf_procfile_fops; - - if (qeth_procfile && - qeth_perf_procfile) - return 0; - else - return -ENOMEM; -} - -void __exit -qeth_remove_procfs_entries(void) -{ - if (qeth_procfile) - remove_proc_entry(QETH_PROCFILE_NAME, NULL); - if (qeth_perf_procfile) - remove_proc_entry(QETH_PERF_PROCFILE_NAME, NULL); -} - diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c deleted file mode 100644 index 2cc3f3a..0000000 --- a/drivers/s390/net/qeth_sys.c +++ /dev/null @@ -1,1858 +0,0 @@ -/* - * - * linux/drivers/s390/net/qeth_sys.c - * - * Linux on zSeries OSA Express and HiperSockets support - * This file contains code related to sysfs. - * - * Copyright 2000,2003 IBM Corporation - * - * Author(s): Thomas Spatzier - * Frank Pavlic - * - */ -#include -#include - -#include - -#include "qeth.h" -#include "qeth_mpc.h" -#include "qeth_fs.h" - -/*****************************************************************************/ -/* */ -/* /sys-fs stuff UNDER DEVELOPMENT !!! */ -/* */ -/*****************************************************************************/ -//low/high watermark - -static ssize_t -qeth_dev_state_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - if (!card) - return -EINVAL; - - switch (card->state) { - case CARD_STATE_DOWN: - return sprintf(buf, "DOWN\n"); - case CARD_STATE_HARDSETUP: - return sprintf(buf, "HARDSETUP\n"); - case CARD_STATE_SOFTSETUP: - return sprintf(buf, "SOFTSETUP\n"); - case CARD_STATE_UP: - if (card->lan_online) - return sprintf(buf, "UP (LAN ONLINE)\n"); - else - return sprintf(buf, "UP (LAN OFFLINE)\n"); - case CARD_STATE_RECOVER: - return sprintf(buf, "RECOVER\n"); - default: - return sprintf(buf, "UNKNOWN\n"); - } -} - -static DEVICE_ATTR(state, 0444, qeth_dev_state_show, NULL); - -static ssize_t -qeth_dev_chpid_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - if (!card) - return -EINVAL; - - return sprintf(buf, "%02X\n", card->info.chpid); -} - -static DEVICE_ATTR(chpid, 0444, qeth_dev_chpid_show, NULL); - -static ssize_t -qeth_dev_if_name_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - if (!card) - return -EINVAL; - return sprintf(buf, "%s\n", QETH_CARD_IFNAME(card)); -} - -static DEVICE_ATTR(if_name, 0444, qeth_dev_if_name_show, NULL); - -static ssize_t -qeth_dev_card_type_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - if (!card) - return -EINVAL; - - return sprintf(buf, "%s\n", qeth_get_cardname_short(card)); -} - -static DEVICE_ATTR(card_type, 0444, qeth_dev_card_type_show, NULL); - -static ssize_t -qeth_dev_portno_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->info.portno); -} - -static ssize_t -qeth_dev_portno_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - unsigned int portno; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - portno = simple_strtoul(buf, &tmp, 16); - if (portno > MAX_PORTNO){ - PRINT_WARN("portno 0x%X is out of range\n", portno); - return -EINVAL; - } - - card->info.portno = portno; - return count; -} - -static DEVICE_ATTR(portno, 0644, qeth_dev_portno_show, qeth_dev_portno_store); - -static ssize_t -qeth_dev_portname_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - char portname[9] = {0, }; - - if (!card) - return -EINVAL; - - if (card->info.portname_required) { - memcpy(portname, card->info.portname + 1, 8); - EBCASC(portname, 8); - return sprintf(buf, "%s\n", portname); - } else - return sprintf(buf, "no portname required\n"); -} - -static ssize_t -qeth_dev_portname_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - tmp = strsep((char **) &buf, "\n"); - if ((strlen(tmp) > 8) || (strlen(tmp) == 0)) - return -EINVAL; - - card->info.portname[0] = strlen(tmp); - /* for beauty reasons */ - for (i = 1; i < 9; i++) - card->info.portname[i] = ' '; - strcpy(card->info.portname + 1, tmp); - ASCEBC(card->info.portname + 1, 8); - - return count; -} - -static DEVICE_ATTR(portname, 0644, qeth_dev_portname_show, - qeth_dev_portname_store); - -static ssize_t -qeth_dev_checksum_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%s checksumming\n", qeth_get_checksum_str(card)); -} - -static ssize_t -qeth_dev_checksum_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "sw_checksumming")) - card->options.checksum_type = SW_CHECKSUMMING; - else if (!strcmp(tmp, "hw_checksumming")) - card->options.checksum_type = HW_CHECKSUMMING; - else if (!strcmp(tmp, "no_checksumming")) - card->options.checksum_type = NO_CHECKSUMMING; - else { - PRINT_WARN("Unknown checksumming type '%s'\n", tmp); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(checksumming, 0644, qeth_dev_checksum_show, - qeth_dev_checksum_store); - -static ssize_t -qeth_dev_prioqing_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - switch (card->qdio.do_prio_queueing) { - case QETH_PRIO_Q_ING_PREC: - return sprintf(buf, "%s\n", "by precedence"); - case QETH_PRIO_Q_ING_TOS: - return sprintf(buf, "%s\n", "by type of service"); - default: - return sprintf(buf, "always queue %i\n", - card->qdio.default_out_queue); - } -} - -static ssize_t -qeth_dev_prioqing_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - /* check if 1920 devices are supported , - * if though we have to permit priority queueing - */ - if (card->qdio.no_out_queues == 1) { - PRINT_WARN("Priority queueing disabled due " - "to hardware limitations!\n"); - card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; - return -EPERM; - } - - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "prio_queueing_prec")) - card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_PREC; - else if (!strcmp(tmp, "prio_queueing_tos")) - card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_TOS; - else if (!strcmp(tmp, "no_prio_queueing:0")) { - card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; - card->qdio.default_out_queue = 0; - } else if (!strcmp(tmp, "no_prio_queueing:1")) { - card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; - card->qdio.default_out_queue = 1; - } else if (!strcmp(tmp, "no_prio_queueing:2")) { - card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; - card->qdio.default_out_queue = 2; - } else if (!strcmp(tmp, "no_prio_queueing:3")) { - card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; - card->qdio.default_out_queue = 3; - } else if (!strcmp(tmp, "no_prio_queueing")) { - card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; - card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; - } else { - PRINT_WARN("Unknown queueing type '%s'\n", tmp); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(priority_queueing, 0644, qeth_dev_prioqing_show, - qeth_dev_prioqing_store); - -static ssize_t -qeth_dev_bufcnt_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->qdio.in_buf_pool.buf_count); -} - -static ssize_t -qeth_dev_bufcnt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int cnt, old_cnt; - int rc; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - old_cnt = card->qdio.in_buf_pool.buf_count; - cnt = simple_strtoul(buf, &tmp, 10); - cnt = (cnt < QETH_IN_BUF_COUNT_MIN) ? QETH_IN_BUF_COUNT_MIN : - ((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt); - if (old_cnt != cnt) { - if ((rc = qeth_realloc_buffer_pool(card, cnt))) - PRINT_WARN("Error (%d) while setting " - "buffer count.\n", rc); - } - return count; -} - -static DEVICE_ATTR(buffer_count, 0644, qeth_dev_bufcnt_show, - qeth_dev_bufcnt_store); - -static ssize_t -qeth_dev_route_show(struct qeth_card *card, struct qeth_routing_info *route, - char *buf) -{ - switch (route->type) { - case PRIMARY_ROUTER: - return sprintf(buf, "%s\n", "primary router"); - case SECONDARY_ROUTER: - return sprintf(buf, "%s\n", "secondary router"); - case MULTICAST_ROUTER: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return sprintf(buf, "%s\n", "multicast router+"); - else - return sprintf(buf, "%s\n", "multicast router"); - case PRIMARY_CONNECTOR: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return sprintf(buf, "%s\n", "primary connector+"); - else - return sprintf(buf, "%s\n", "primary connector"); - case SECONDARY_CONNECTOR: - if (card->info.broadcast_capable == QETH_BROADCAST_WITHOUT_ECHO) - return sprintf(buf, "%s\n", "secondary connector+"); - else - return sprintf(buf, "%s\n", "secondary connector"); - default: - return sprintf(buf, "%s\n", "no"); - } -} - -static ssize_t -qeth_dev_route4_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_route_show(card, &card->options.route4, buf); -} - -static ssize_t -qeth_dev_route_store(struct qeth_card *card, struct qeth_routing_info *route, - enum qeth_prot_versions prot, const char *buf, size_t count) -{ - enum qeth_routing_types old_route_type = route->type; - char *tmp; - int rc; - - tmp = strsep((char **) &buf, "\n"); - - if (!strcmp(tmp, "no_router")){ - route->type = NO_ROUTER; - } else if (!strcmp(tmp, "primary_connector")) { - route->type = PRIMARY_CONNECTOR; - } else if (!strcmp(tmp, "secondary_connector")) { - route->type = SECONDARY_CONNECTOR; - } else if (!strcmp(tmp, "primary_router")) { - route->type = PRIMARY_ROUTER; - } else if (!strcmp(tmp, "secondary_router")) { - route->type = SECONDARY_ROUTER; - } else if (!strcmp(tmp, "multicast_router")) { - route->type = MULTICAST_ROUTER; - } else { - PRINT_WARN("Invalid routing type '%s'.\n", tmp); - return -EINVAL; - } - if (((card->state == CARD_STATE_SOFTSETUP) || - (card->state == CARD_STATE_UP)) && - (old_route_type != route->type)){ - if (prot == QETH_PROT_IPV4) - rc = qeth_setrouting_v4(card); - else if (prot == QETH_PROT_IPV6) - rc = qeth_setrouting_v6(card); - } - return count; -} - -static ssize_t -qeth_dev_route4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_route_store(card, &card->options.route4, - QETH_PROT_IPV4, buf, count); -} - -static DEVICE_ATTR(route4, 0644, qeth_dev_route4_show, qeth_dev_route4_store); - -#ifdef CONFIG_QETH_IPV6 -static ssize_t -qeth_dev_route6_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (!qeth_is_supported(card, IPA_IPV6)) - return sprintf(buf, "%s\n", "n/a"); - - return qeth_dev_route_show(card, &card->options.route6, buf); -} - -static ssize_t -qeth_dev_route6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (!qeth_is_supported(card, IPA_IPV6)){ - PRINT_WARN("IPv6 not supported for interface %s.\n" - "Routing status no changed.\n", - QETH_CARD_IFNAME(card)); - return -ENOTSUPP; - } - - return qeth_dev_route_store(card, &card->options.route6, - QETH_PROT_IPV6, buf, count); -} - -static DEVICE_ATTR(route6, 0644, qeth_dev_route6_show, qeth_dev_route6_store); -#endif - -static ssize_t -qeth_dev_add_hhlen_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->options.add_hhlen); -} - -static ssize_t -qeth_dev_add_hhlen_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 10); - if ((i < 0) || (i > MAX_ADD_HHLEN)) { - PRINT_WARN("add_hhlen out of range\n"); - return -EINVAL; - } - card->options.add_hhlen = i; - - return count; -} - -static DEVICE_ATTR(add_hhlen, 0644, qeth_dev_add_hhlen_show, - qeth_dev_add_hhlen_store); - -static ssize_t -qeth_dev_fake_ll_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->options.fake_ll? 1:0); -} - -static ssize_t -qeth_dev_fake_ll_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 16); - if ((i != 0) && (i != 1)) { - PRINT_WARN("fake_ll: write 0 or 1 to this file!\n"); - return -EINVAL; - } - card->options.fake_ll = i; - return count; -} - -static DEVICE_ATTR(fake_ll, 0644, qeth_dev_fake_ll_show, - qeth_dev_fake_ll_store); - -static ssize_t -qeth_dev_fake_broadcast_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->options.fake_broadcast? 1:0); -} - -static ssize_t -qeth_dev_fake_broadcast_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 16); - if ((i == 0) || (i == 1)) - card->options.fake_broadcast = i; - else { - PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n"); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(fake_broadcast, 0644, qeth_dev_fake_broadcast_show, - qeth_dev_fake_broadcast_store); - -static ssize_t -qeth_dev_recover_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if (card->state != CARD_STATE_UP) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 16); - if (i == 1) - qeth_schedule_recovery(card); - - return count; -} - -static DEVICE_ATTR(recover, 0200, NULL, qeth_dev_recover_store); - -static ssize_t -qeth_dev_broadcast_mode_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) - return sprintf(buf, "n/a\n"); - - return sprintf(buf, "%s\n", (card->options.broadcast_mode == - QETH_TR_BROADCAST_ALLRINGS)? - "all rings":"local"); -} - -static ssize_t -qeth_dev_broadcast_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR))){ - PRINT_WARN("Device is not a tokenring device!\n"); - return -EINVAL; - } - - tmp = strsep((char **) &buf, "\n"); - - if (!strcmp(tmp, "local")){ - card->options.broadcast_mode = QETH_TR_BROADCAST_LOCAL; - return count; - } else if (!strcmp(tmp, "all_rings")) { - card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; - return count; - } else { - PRINT_WARN("broadcast_mode: invalid mode %s!\n", - tmp); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(broadcast_mode, 0644, qeth_dev_broadcast_mode_show, - qeth_dev_broadcast_mode_store); - -static ssize_t -qeth_dev_canonical_macaddr_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) - return sprintf(buf, "n/a\n"); - - return sprintf(buf, "%i\n", (card->options.macaddr_mode == - QETH_TR_MACADDR_CANONICAL)? 1:0); -} - -static ssize_t -qeth_dev_canonical_macaddr_store(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || - (card->info.link_type == QETH_LINK_TYPE_LANE_TR))){ - PRINT_WARN("Device is not a tokenring device!\n"); - return -EINVAL; - } - - i = simple_strtoul(buf, &tmp, 16); - if ((i == 0) || (i == 1)) - card->options.macaddr_mode = i? - QETH_TR_MACADDR_CANONICAL : - QETH_TR_MACADDR_NONCANONICAL; - else { - PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n"); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(canonical_macaddr, 0644, qeth_dev_canonical_macaddr_show, - qeth_dev_canonical_macaddr_store); - -static ssize_t -qeth_dev_layer2_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->options.layer2 ? 1:0); -} - -static ssize_t -qeth_dev_layer2_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - if (card->info.type == QETH_CARD_TYPE_IQD) { - PRINT_WARN("Layer2 on Hipersockets is not supported! \n"); - return -EPERM; - } - - if (((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER))) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 16); - if ((i == 0) || (i == 1)) - card->options.layer2 = i; - else { - PRINT_WARN("layer2: write 0 or 1 to this file!\n"); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(layer2, 0644, qeth_dev_layer2_show, - qeth_dev_layer2_store); - -static ssize_t -qeth_dev_performance_stats_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", card->options.performance_stats ? 1:0); -} - -static ssize_t -qeth_dev_performance_stats_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - int i; - - if (!card) - return -EINVAL; - - i = simple_strtoul(buf, &tmp, 16); - if ((i == 0) || (i == 1)) { - if (i == card->options.performance_stats) - return count; - card->options.performance_stats = i; - if (i == 0) - memset(&card->perf_stats, 0, - sizeof(struct qeth_perf_stats)); - card->perf_stats.initial_rx_packets = card->stats.rx_packets; - card->perf_stats.initial_tx_packets = card->stats.tx_packets; - } else { - PRINT_WARN("performance_stats: write 0 or 1 to this file!\n"); - return -EINVAL; - } - return count; -} - -static DEVICE_ATTR(performance_stats, 0644, qeth_dev_performance_stats_show, - qeth_dev_performance_stats_store); - -static ssize_t -qeth_dev_large_send_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - switch (card->options.large_send) { - case QETH_LARGE_SEND_NO: - return sprintf(buf, "%s\n", "no"); - case QETH_LARGE_SEND_EDDP: - return sprintf(buf, "%s\n", "EDDP"); - case QETH_LARGE_SEND_TSO: - return sprintf(buf, "%s\n", "TSO"); - default: - return sprintf(buf, "%s\n", "N/A"); - } -} - -static ssize_t -qeth_dev_large_send_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - enum qeth_large_send_types type; - int rc = 0; - char *tmp; - - if (!card) - return -EINVAL; - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "no")){ - type = QETH_LARGE_SEND_NO; - } else if (!strcmp(tmp, "EDDP")) { - type = QETH_LARGE_SEND_EDDP; - } else if (!strcmp(tmp, "TSO")) { - type = QETH_LARGE_SEND_TSO; - } else { - PRINT_WARN("large_send: invalid mode %s!\n", tmp); - return -EINVAL; - } - if (card->options.large_send == type) - return count; - if ((rc = qeth_set_large_send(card, type))) - return rc; - return count; -} - -static DEVICE_ATTR(large_send, 0644, qeth_dev_large_send_show, - qeth_dev_large_send_store); - -static ssize_t -qeth_dev_blkt_show(char *buf, struct qeth_card *card, int value ) -{ - - if (!card) - return -EINVAL; - - return sprintf(buf, "%i\n", value); -} - -static ssize_t -qeth_dev_blkt_store(struct qeth_card *card, const char *buf, size_t count, - int *value, int max_value) -{ - char *tmp; - int i; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - i = simple_strtoul(buf, &tmp, 10); - if (i <= max_value) { - *value = i; - } else { - PRINT_WARN("blkt total time: write values between" - " 0 and %d to this file!\n", max_value); - return -EINVAL; - } - return count; -} - -static ssize_t -qeth_dev_blkt_total_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_show(buf, card, card->info.blkt.time_total); -} - - -static ssize_t -qeth_dev_blkt_total_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_store(card, buf, count, - &card->info.blkt.time_total,1000); -} - - - -static DEVICE_ATTR(total, 0644, qeth_dev_blkt_total_show, - qeth_dev_blkt_total_store); - -static ssize_t -qeth_dev_blkt_inter_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_show(buf, card, card->info.blkt.inter_packet); -} - - -static ssize_t -qeth_dev_blkt_inter_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_store(card, buf, count, - &card->info.blkt.inter_packet,100); -} - -static DEVICE_ATTR(inter, 0644, qeth_dev_blkt_inter_show, - qeth_dev_blkt_inter_store); - -static ssize_t -qeth_dev_blkt_inter_jumbo_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_show(buf, card, - card->info.blkt.inter_packet_jumbo); -} - - -static ssize_t -qeth_dev_blkt_inter_jumbo_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - return qeth_dev_blkt_store(card, buf, count, - &card->info.blkt.inter_packet_jumbo,100); -} - -static DEVICE_ATTR(inter_jumbo, 0644, qeth_dev_blkt_inter_jumbo_show, - qeth_dev_blkt_inter_jumbo_store); - -static struct device_attribute * qeth_blkt_device_attrs[] = { - &dev_attr_total, - &dev_attr_inter, - &dev_attr_inter_jumbo, - NULL, -}; - -static struct attribute_group qeth_device_blkt_group = { - .name = "blkt", - .attrs = (struct attribute **)qeth_blkt_device_attrs, -}; - -static struct device_attribute * qeth_device_attrs[] = { - &dev_attr_state, - &dev_attr_chpid, - &dev_attr_if_name, - &dev_attr_card_type, - &dev_attr_portno, - &dev_attr_portname, - &dev_attr_checksumming, - &dev_attr_priority_queueing, - &dev_attr_buffer_count, - &dev_attr_route4, -#ifdef CONFIG_QETH_IPV6 - &dev_attr_route6, -#endif - &dev_attr_add_hhlen, - &dev_attr_fake_ll, - &dev_attr_fake_broadcast, - &dev_attr_recover, - &dev_attr_broadcast_mode, - &dev_attr_canonical_macaddr, - &dev_attr_layer2, - &dev_attr_large_send, - &dev_attr_performance_stats, - NULL, -}; - -static struct attribute_group qeth_device_attr_group = { - .attrs = (struct attribute **)qeth_device_attrs, -}; - -static struct device_attribute * qeth_osn_device_attrs[] = { - &dev_attr_state, - &dev_attr_chpid, - &dev_attr_if_name, - &dev_attr_card_type, - &dev_attr_buffer_count, - &dev_attr_recover, - NULL, -}; - -static struct attribute_group qeth_osn_device_attr_group = { - .attrs = (struct attribute **)qeth_osn_device_attrs, -}; - -#define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \ -struct device_attribute dev_attr_##_id = { \ - .attr = {.name=__stringify(_name), .mode=_mode, },\ - .show = _show, \ - .store = _store, \ -}; - -static int -qeth_check_layer2(struct qeth_card *card) -{ - if (card->options.layer2) - return -EPERM; - return 0; -} - - -static ssize_t -qeth_dev_ipato_enable_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - return sprintf(buf, "%i\n", card->ipato.enabled? 1:0); -} - -static ssize_t -qeth_dev_ipato_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if ((card->state != CARD_STATE_DOWN) && - (card->state != CARD_STATE_RECOVER)) - return -EPERM; - - if (qeth_check_layer2(card)) - return -EPERM; - - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "toggle")){ - card->ipato.enabled = (card->ipato.enabled)? 0 : 1; - } else if (!strcmp(tmp, "1")){ - card->ipato.enabled = 1; - } else if (!strcmp(tmp, "0")){ - card->ipato.enabled = 0; - } else { - PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to " - "this file\n"); - return -EINVAL; - } - return count; -} - -static QETH_DEVICE_ATTR(ipato_enable, enable, 0644, - qeth_dev_ipato_enable_show, - qeth_dev_ipato_enable_store); - -static ssize_t -qeth_dev_ipato_invert4_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - - return sprintf(buf, "%i\n", card->ipato.invert4? 1:0); -} - -static ssize_t -qeth_dev_ipato_invert4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "toggle")){ - card->ipato.invert4 = (card->ipato.invert4)? 0 : 1; - } else if (!strcmp(tmp, "1")){ - card->ipato.invert4 = 1; - } else if (!strcmp(tmp, "0")){ - card->ipato.invert4 = 0; - } else { - PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to " - "this file\n"); - return -EINVAL; - } - return count; -} - -static QETH_DEVICE_ATTR(ipato_invert4, invert4, 0644, - qeth_dev_ipato_invert4_show, - qeth_dev_ipato_invert4_store); - -static ssize_t -qeth_dev_ipato_add_show(char *buf, struct qeth_card *card, - enum qeth_prot_versions proto) -{ - struct qeth_ipato_entry *ipatoe; - unsigned long flags; - char addr_str[40]; - int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - int i = 0; - - if (qeth_check_layer2(card)) - return -EPERM; - - entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; - /* add strlen for "/\n" */ - entry_len += (proto == QETH_PROT_IPV4)? 5 : 6; - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry(ipatoe, &card->ipato.entries, entry){ - if (ipatoe->proto != proto) - continue; - /* String must not be longer than PAGE_SIZE. So we check if - * string length gets near PAGE_SIZE. Then we can savely display - * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) - break; - qeth_ipaddr_to_string(proto, ipatoe->addr, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, - "%s/%i\n", addr_str, ipatoe->mask_bits); - } - spin_unlock_irqrestore(&card->ip_lock, flags); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); - - return i; -} - -static ssize_t -qeth_dev_ipato_add4_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_add_show(buf, card, QETH_PROT_IPV4); -} - -static int -qeth_parse_ipatoe(const char* buf, enum qeth_prot_versions proto, - u8 *addr, int *mask_bits) -{ - const char *start, *end; - char *tmp; - char buffer[40] = {0, }; - - start = buf; - /* get address string */ - end = strchr(start, '/'); - if (!end || (end - start >= 40)){ - PRINT_WARN("Invalid format for ipato_addx/delx. " - "Use /\n"); - return -EINVAL; - } - strncpy(buffer, start, end - start); - if (qeth_string_to_ipaddr(buffer, proto, addr)){ - PRINT_WARN("Invalid IP address format!\n"); - return -EINVAL; - } - start = end + 1; - *mask_bits = simple_strtoul(start, &tmp, 10); - if (!strlen(start) || - (tmp == start) || - (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) { - PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n"); - return -EINVAL; - } - return 0; -} - -static ssize_t -qeth_dev_ipato_add_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - struct qeth_ipato_entry *ipatoe; - u8 addr[16]; - int mask_bits; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_ipatoe(buf, proto, addr, &mask_bits))) - return rc; - - if (!(ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL))){ - PRINT_WARN("No memory to allocate ipato entry\n"); - return -ENOMEM; - } - ipatoe->proto = proto; - memcpy(ipatoe->addr, addr, (proto == QETH_PROT_IPV4)? 4:16); - ipatoe->mask_bits = mask_bits; - - if ((rc = qeth_add_ipato_entry(card, ipatoe))){ - kfree(ipatoe); - return rc; - } - - return count; -} - -static ssize_t -qeth_dev_ipato_add4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_add_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(ipato_add4, add4, 0644, - qeth_dev_ipato_add4_show, - qeth_dev_ipato_add4_store); - -static ssize_t -qeth_dev_ipato_del_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - u8 addr[16]; - int mask_bits; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_ipatoe(buf, proto, addr, &mask_bits))) - return rc; - - qeth_del_ipato_entry(card, proto, addr, mask_bits); - - return count; -} - -static ssize_t -qeth_dev_ipato_del4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_del_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(ipato_del4, del4, 0200, NULL, - qeth_dev_ipato_del4_store); - -#ifdef CONFIG_QETH_IPV6 -static ssize_t -qeth_dev_ipato_invert6_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - - return sprintf(buf, "%i\n", card->ipato.invert6? 1:0); -} - -static ssize_t -qeth_dev_ipato_invert6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - char *tmp; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - - tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "toggle")){ - card->ipato.invert6 = (card->ipato.invert6)? 0 : 1; - } else if (!strcmp(tmp, "1")){ - card->ipato.invert6 = 1; - } else if (!strcmp(tmp, "0")){ - card->ipato.invert6 = 0; - } else { - PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to " - "this file\n"); - return -EINVAL; - } - return count; -} - -static QETH_DEVICE_ATTR(ipato_invert6, invert6, 0644, - qeth_dev_ipato_invert6_show, - qeth_dev_ipato_invert6_store); - - -static ssize_t -qeth_dev_ipato_add6_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_add_show(buf, card, QETH_PROT_IPV6); -} - -static ssize_t -qeth_dev_ipato_add6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_add_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(ipato_add6, add6, 0644, - qeth_dev_ipato_add6_show, - qeth_dev_ipato_add6_store); - -static ssize_t -qeth_dev_ipato_del6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_ipato_del_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(ipato_del6, del6, 0200, NULL, - qeth_dev_ipato_del6_store); -#endif /* CONFIG_QETH_IPV6 */ - -static struct device_attribute * qeth_ipato_device_attrs[] = { - &dev_attr_ipato_enable, - &dev_attr_ipato_invert4, - &dev_attr_ipato_add4, - &dev_attr_ipato_del4, -#ifdef CONFIG_QETH_IPV6 - &dev_attr_ipato_invert6, - &dev_attr_ipato_add6, - &dev_attr_ipato_del6, -#endif - NULL, -}; - -static struct attribute_group qeth_device_ipato_group = { - .name = "ipa_takeover", - .attrs = (struct attribute **)qeth_ipato_device_attrs, -}; - -static ssize_t -qeth_dev_vipa_add_show(char *buf, struct qeth_card *card, - enum qeth_prot_versions proto) -{ - struct qeth_ipaddr *ipaddr; - char addr_str[40]; - int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - unsigned long flags; - int i = 0; - - if (qeth_check_layer2(card)) - return -EPERM; - - entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; - entry_len += 2; /* \n + terminator */ - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry(ipaddr, &card->ip_list, entry){ - if (ipaddr->proto != proto) - continue; - if (ipaddr->type != QETH_IP_TYPE_VIPA) - continue; - /* String must not be longer than PAGE_SIZE. So we check if - * string length gets near PAGE_SIZE. Then we can savely display - * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) - break; - qeth_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); - } - spin_unlock_irqrestore(&card->ip_lock, flags); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); - - return i; -} - -static ssize_t -qeth_dev_vipa_add4_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_vipa_add_show(buf, card, QETH_PROT_IPV4); -} - -static int -qeth_parse_vipae(const char* buf, enum qeth_prot_versions proto, - u8 *addr) -{ - if (qeth_string_to_ipaddr(buf, proto, addr)){ - PRINT_WARN("Invalid IP address format!\n"); - return -EINVAL; - } - return 0; -} - -static ssize_t -qeth_dev_vipa_add_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - u8 addr[16] = {0, }; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_vipae(buf, proto, addr))) - return rc; - - if ((rc = qeth_add_vipa(card, proto, addr))) - return rc; - - return count; -} - -static ssize_t -qeth_dev_vipa_add4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_vipa_add_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(vipa_add4, add4, 0644, - qeth_dev_vipa_add4_show, - qeth_dev_vipa_add4_store); - -static ssize_t -qeth_dev_vipa_del_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - u8 addr[16]; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_vipae(buf, proto, addr))) - return rc; - - qeth_del_vipa(card, proto, addr); - - return count; -} - -static ssize_t -qeth_dev_vipa_del4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_vipa_del_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(vipa_del4, del4, 0200, NULL, - qeth_dev_vipa_del4_store); - -#ifdef CONFIG_QETH_IPV6 -static ssize_t -qeth_dev_vipa_add6_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_vipa_add_show(buf, card, QETH_PROT_IPV6); -} - -static ssize_t -qeth_dev_vipa_add6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_vipa_add_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(vipa_add6, add6, 0644, - qeth_dev_vipa_add6_show, - qeth_dev_vipa_add6_store); - -static ssize_t -qeth_dev_vipa_del6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - if (qeth_check_layer2(card)) - return -EPERM; - - return qeth_dev_vipa_del_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(vipa_del6, del6, 0200, NULL, - qeth_dev_vipa_del6_store); -#endif /* CONFIG_QETH_IPV6 */ - -static struct device_attribute * qeth_vipa_device_attrs[] = { - &dev_attr_vipa_add4, - &dev_attr_vipa_del4, -#ifdef CONFIG_QETH_IPV6 - &dev_attr_vipa_add6, - &dev_attr_vipa_del6, -#endif - NULL, -}; - -static struct attribute_group qeth_device_vipa_group = { - .name = "vipa", - .attrs = (struct attribute **)qeth_vipa_device_attrs, -}; - -static ssize_t -qeth_dev_rxip_add_show(char *buf, struct qeth_card *card, - enum qeth_prot_versions proto) -{ - struct qeth_ipaddr *ipaddr; - char addr_str[40]; - int entry_len; /* length of 1 entry string, differs between v4 and v6 */ - unsigned long flags; - int i = 0; - - if (qeth_check_layer2(card)) - return -EPERM; - - entry_len = (proto == QETH_PROT_IPV4)? 12 : 40; - entry_len += 2; /* \n + terminator */ - spin_lock_irqsave(&card->ip_lock, flags); - list_for_each_entry(ipaddr, &card->ip_list, entry){ - if (ipaddr->proto != proto) - continue; - if (ipaddr->type != QETH_IP_TYPE_RXIP) - continue; - /* String must not be longer than PAGE_SIZE. So we check if - * string length gets near PAGE_SIZE. Then we can savely display - * the next IPv6 address (worst case, compared to IPv4) */ - if ((PAGE_SIZE - i) <= entry_len) - break; - qeth_ipaddr_to_string(proto, (const u8 *)&ipaddr->u, addr_str); - i += snprintf(buf + i, PAGE_SIZE - i, "%s\n", addr_str); - } - spin_unlock_irqrestore(&card->ip_lock, flags); - i += snprintf(buf + i, PAGE_SIZE - i, "\n"); - - return i; -} - -static ssize_t -qeth_dev_rxip_add4_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_add_show(buf, card, QETH_PROT_IPV4); -} - -static int -qeth_parse_rxipe(const char* buf, enum qeth_prot_versions proto, - u8 *addr) -{ - if (qeth_string_to_ipaddr(buf, proto, addr)){ - PRINT_WARN("Invalid IP address format!\n"); - return -EINVAL; - } - return 0; -} - -static ssize_t -qeth_dev_rxip_add_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - u8 addr[16] = {0, }; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_rxipe(buf, proto, addr))) - return rc; - - if ((rc = qeth_add_rxip(card, proto, addr))) - return rc; - - return count; -} - -static ssize_t -qeth_dev_rxip_add4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_add_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(rxip_add4, add4, 0644, - qeth_dev_rxip_add4_show, - qeth_dev_rxip_add4_store); - -static ssize_t -qeth_dev_rxip_del_store(const char *buf, size_t count, - struct qeth_card *card, enum qeth_prot_versions proto) -{ - u8 addr[16]; - int rc; - - if (qeth_check_layer2(card)) - return -EPERM; - if ((rc = qeth_parse_rxipe(buf, proto, addr))) - return rc; - - qeth_del_rxip(card, proto, addr); - - return count; -} - -static ssize_t -qeth_dev_rxip_del4_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_del_store(buf, count, card, QETH_PROT_IPV4); -} - -static QETH_DEVICE_ATTR(rxip_del4, del4, 0200, NULL, - qeth_dev_rxip_del4_store); - -#ifdef CONFIG_QETH_IPV6 -static ssize_t -qeth_dev_rxip_add6_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_add_show(buf, card, QETH_PROT_IPV6); -} - -static ssize_t -qeth_dev_rxip_add6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_add_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(rxip_add6, add6, 0644, - qeth_dev_rxip_add6_show, - qeth_dev_rxip_add6_store); - -static ssize_t -qeth_dev_rxip_del6_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct qeth_card *card = dev->driver_data; - - if (!card) - return -EINVAL; - - return qeth_dev_rxip_del_store(buf, count, card, QETH_PROT_IPV6); -} - -static QETH_DEVICE_ATTR(rxip_del6, del6, 0200, NULL, - qeth_dev_rxip_del6_store); -#endif /* CONFIG_QETH_IPV6 */ - -static struct device_attribute * qeth_rxip_device_attrs[] = { - &dev_attr_rxip_add4, - &dev_attr_rxip_del4, -#ifdef CONFIG_QETH_IPV6 - &dev_attr_rxip_add6, - &dev_attr_rxip_del6, -#endif - NULL, -}; - -static struct attribute_group qeth_device_rxip_group = { - .name = "rxip", - .attrs = (struct attribute **)qeth_rxip_device_attrs, -}; - -int -qeth_create_device_attributes(struct device *dev) -{ - int ret; - struct qeth_card *card = dev->driver_data; - - if (card->info.type == QETH_CARD_TYPE_OSN) - return sysfs_create_group(&dev->kobj, - &qeth_osn_device_attr_group); - - if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group))) - return ret; - if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){ - sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); - return ret; - } - if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_vipa_group))){ - sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); - sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); - return ret; - } - if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_rxip_group))){ - sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); - sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); - sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); - return ret; - } - if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_blkt_group))){ - sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); - sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); - sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); - sysfs_remove_group(&dev->kobj, &qeth_device_rxip_group); - return ret; - } - return 0; -} - -void -qeth_remove_device_attributes(struct device *dev) -{ - struct qeth_card *card = dev->driver_data; - - if (card->info.type == QETH_CARD_TYPE_OSN) { - sysfs_remove_group(&dev->kobj, &qeth_osn_device_attr_group); - return; - } - sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); - sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); - sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); - sysfs_remove_group(&dev->kobj, &qeth_device_rxip_group); - sysfs_remove_group(&dev->kobj, &qeth_device_blkt_group); -} - -/**********************/ -/* DRIVER ATTRIBUTES */ -/**********************/ -static ssize_t -qeth_driver_group_store(struct device_driver *ddrv, const char *buf, - size_t count) -{ - const char *start, *end; - char bus_ids[3][BUS_ID_SIZE], *argv[3]; - int i; - int err; - - start = buf; - for (i = 0; i < 3; i++) { - static const char delim[] = { ',', ',', '\n' }; - int len; - - if (!(end = strchr(start, delim[i]))) - return -EINVAL; - len = min_t(ptrdiff_t, BUS_ID_SIZE, end - start); - strncpy(bus_ids[i], start, len); - bus_ids[i][len] = '\0'; - start = end + 1; - argv[i] = bus_ids[i]; - } - err = ccwgroup_create(qeth_root_dev, qeth_ccwgroup_driver.driver_id, - &qeth_ccw_driver, 3, argv); - if (err) - return err; - else - return count; -} - - -static DRIVER_ATTR(group, 0200, NULL, qeth_driver_group_store); - -static ssize_t -qeth_driver_notifier_register_store(struct device_driver *ddrv, const char *buf, - size_t count) -{ - int rc; - int signum; - char *tmp, *tmp2; - - tmp = strsep((char **) &buf, "\n"); - if (!strncmp(tmp, "unregister", 10)){ - if ((rc = qeth_notifier_unregister(current))) - return rc; - return count; - } - - signum = simple_strtoul(tmp, &tmp2, 10); - if ((signum < 0) || (signum > 32)){ - PRINT_WARN("Signal number %d is out of range\n", signum); - return -EINVAL; - } - if ((rc = qeth_notifier_register(current, signum))) - return rc; - - return count; -} - -static DRIVER_ATTR(notifier_register, 0200, NULL, - qeth_driver_notifier_register_store); - -int -qeth_create_driver_attributes(void) -{ - int rc; - - if ((rc = driver_create_file(&qeth_ccwgroup_driver.driver, - &driver_attr_group))) - return rc; - return driver_create_file(&qeth_ccwgroup_driver.driver, - &driver_attr_notifier_register); -} - -void -qeth_remove_driver_attributes(void) -{ - driver_remove_file(&qeth_ccwgroup_driver.driver, - &driver_attr_group); - driver_remove_file(&qeth_ccwgroup_driver.driver, - &driver_attr_notifier_register); -} diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h deleted file mode 100644 index c20e923..0000000 --- a/drivers/s390/net/qeth_tso.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_tso.h - * - * Header file for qeth TCP Segmentation Offload support. - * - * Copyright 2004 IBM Corporation - * - * Author(s): Frank Pavlic - * - */ -#ifndef __QETH_TSO_H__ -#define __QETH_TSO_H__ - -#include -#include -#include -#include -#include -#include "qeth.h" -#include "qeth_mpc.h" - - -static inline struct qeth_hdr_tso * -qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb) -{ - QETH_DBF_TEXT(trace, 5, "tsoprsk"); - return qeth_push_skb(card, *skb, sizeof(struct qeth_hdr_tso)); -} - -/** - * fill header for a TSO packet - */ -static inline void -qeth_tso_fill_header(struct qeth_card *card, struct sk_buff *skb) -{ - struct qeth_hdr_tso *hdr; - struct tcphdr *tcph; - struct iphdr *iph; - - QETH_DBF_TEXT(trace, 5, "tsofhdr"); - - hdr = (struct qeth_hdr_tso *) skb->data; - iph = ip_hdr(skb); - tcph = tcp_hdr(skb); - /*fix header to TSO values ...*/ - hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO; - /*set values which are fix for the first approach ...*/ - hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso); - hdr->ext.imb_hdr_no = 1; - hdr->ext.hdr_type = 1; - hdr->ext.hdr_version = 1; - hdr->ext.hdr_len = 28; - /*insert non-fix values */ - hdr->ext.mss = skb_shinfo(skb)->gso_size; - hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4); - hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len - - sizeof(struct qeth_hdr_tso)); -} - -/** - * change some header values as requested by hardware - */ -static inline void -qeth_tso_set_tcpip_header(struct qeth_card *card, struct sk_buff *skb) -{ - struct iphdr *iph = ip_hdr(skb); - struct ipv6hdr *ip6h = ipv6_hdr(skb); - struct tcphdr *tcph = tcp_hdr(skb); - - tcph->check = 0; - if (skb->protocol == ETH_P_IPV6) { - ip6h->payload_len = 0; - tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, - 0, IPPROTO_TCP, 0); - return; - } - /*OSA want us to set these values ...*/ - tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, - 0, IPPROTO_TCP, 0); - iph->tot_len = 0; - iph->check = 0; -} - -static inline int -qeth_tso_prepare_packet(struct qeth_card *card, struct sk_buff *skb, - int ipv, int cast_type) -{ - struct qeth_hdr_tso *hdr; - - QETH_DBF_TEXT(trace, 5, "tsoprep"); - - hdr = (struct qeth_hdr_tso *) qeth_tso_prepare_skb(card, &skb); - if (hdr == NULL) { - QETH_DBF_TEXT(trace, 4, "tsoperr"); - return -ENOMEM; - } - memset(hdr, 0, sizeof(struct qeth_hdr_tso)); - /*fill first 32 bytes of qdio header as used - *FIXME: TSO has two struct members - * with different names but same size - * */ - qeth_fill_header(card, &hdr->hdr, skb, ipv, cast_type); - qeth_tso_fill_header(card, skb); - qeth_tso_set_tcpip_header(card, skb); - return 0; -} - -static inline void -__qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer, - int is_tso, int *next_element_to_fill) -{ - struct skb_frag_struct *frag; - int fragno; - unsigned long addr; - int element, cnt, dlen; - - fragno = skb_shinfo(skb)->nr_frags; - element = *next_element_to_fill; - dlen = 0; - - if (is_tso) - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_FIRST_FRAG; - if ( (dlen = (skb->len - skb->data_len)) ) { - buffer->element[element].addr = skb->data; - buffer->element[element].length = dlen; - element++; - } - for (cnt = 0; cnt < fragno; cnt++) { - frag = &skb_shinfo(skb)->frags[cnt]; - addr = (page_to_pfn(frag->page) << PAGE_SHIFT) + - frag->page_offset; - buffer->element[element].addr = (char *)addr; - buffer->element[element].length = frag->size; - if (cnt < (fragno - 1)) - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_LAST_FRAG; - element++; - } - *next_element_to_fill = element; -} -#endif /* __QETH_TSO_H__ */ -- cgit v1.1 From 3a3d5756ac552ee2d2cca6ba0912f0ff328e8357 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Wed, 20 Feb 2008 16:44:07 -0500 Subject: S2io: Multiqueue network device support implementation - Resubmit #3 Multiqueue netwrok device support implementation. - Added a loadable parameter "multiq" to enable/disable multiqueue support, by default it is disabled. - skb->queue_mapping is not used for queue/fifo selection. FIFO selection is based on skb->priority. - Added per FIFO flags FIFO_QUEUE_START and FIFO_QUEUE_STOP. Check this flag for starting and stopping netif queue and update the flags accordingly. - In tx_intr_handler added a check to ensure that we have free TXDs before wak- ing up the queue. - Added helper functions for queue manipulation(start/stop/wakeup) to invoke appropriate netif_ functions. - Calling netif_start/stop for link up/down case respectively. - As per Andi kleen's review comments, using skb->priority field for FIFO selection. Signed-off-by: Surjit Reang Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 206 +++++++++++++++++++++++++++++++++++++++++++++-------- drivers/net/s2io.h | 10 +++ 2 files changed, 186 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index c72787a..3ddc0aa 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -50,6 +50,8 @@ * Possible values '1' for enable , '0' for disable. * Default is '2' - which means disable in promisc mode * and enable in non-promiscuous mode. + * multiq: This parameter used to enable/disable MULTIQUEUE support. + * Possible values '1' for enable and '0' for disable. Default is '0' ************************************************************************/ #include @@ -458,8 +460,7 @@ MODULE_VERSION(DRV_VERSION); /* Module Loadable parameters. */ S2IO_PARM_INT(tx_fifo_num, 1); S2IO_PARM_INT(rx_ring_num, 1); - - +S2IO_PARM_INT(multiq, 0); S2IO_PARM_INT(rx_ring_mode, 1); S2IO_PARM_INT(use_continuous_tx_intrs, 1); S2IO_PARM_INT(rmac_pause_time, 0x100); @@ -533,6 +534,101 @@ static struct pci_driver s2io_driver = { /* A simplifier macro used both by init and free shared_mem Fns(). */ #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each) +/* netqueue manipulation helper functions */ +static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp) +{ + int i; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) { + for (i = 0; i < sp->config.tx_fifo_num; i++) + netif_stop_subqueue(sp->dev, i); + } else +#endif + { + for (i = 0; i < sp->config.tx_fifo_num; i++) + sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP; + netif_stop_queue(sp->dev); + } +} + +static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no) +{ +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) + netif_stop_subqueue(sp->dev, fifo_no); + else +#endif + { + sp->mac_control.fifos[fifo_no].queue_state = + FIFO_QUEUE_STOP; + netif_stop_queue(sp->dev); + } +} + +static inline void s2io_start_all_tx_queue(struct s2io_nic *sp) +{ + int i; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) { + for (i = 0; i < sp->config.tx_fifo_num; i++) + netif_start_subqueue(sp->dev, i); + } else +#endif + { + for (i = 0; i < sp->config.tx_fifo_num; i++) + sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; + netif_start_queue(sp->dev); + } +} + +static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no) +{ +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) + netif_start_subqueue(sp->dev, fifo_no); + else +#endif + { + sp->mac_control.fifos[fifo_no].queue_state = + FIFO_QUEUE_START; + netif_start_queue(sp->dev); + } +} + +static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp) +{ + int i; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) { + for (i = 0; i < sp->config.tx_fifo_num; i++) + netif_wake_subqueue(sp->dev, i); + } else +#endif + { + for (i = 0; i < sp->config.tx_fifo_num; i++) + sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; + netif_wake_queue(sp->dev); + } +} + +static inline void s2io_wake_tx_queue( + struct fifo_info *fifo, int cnt, u8 multiq) +{ + +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (multiq) { + if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no)) + netif_wake_subqueue(fifo->dev, fifo->fifo_no); + } else +#endif + if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) { + if (netif_queue_stopped(fifo->dev)) { + fifo->queue_state = FIFO_QUEUE_START; + netif_wake_queue(fifo->dev); + } + } +} + /** * init_shared_mem - Allocation and Initialization of Memory * @nic: Device private variable. @@ -614,6 +710,7 @@ static int init_shared_mem(struct s2io_nic *nic) mac_control->fifos[i].fifo_no = i; mac_control->fifos[i].nic = nic; mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2; + mac_control->fifos[i].dev = dev; for (j = 0; j < page_num; j++) { int k = 0; @@ -2972,10 +3069,10 @@ static void rx_intr_handler(struct ring_info *ring_data) static void tx_intr_handler(struct fifo_info *fifo_data) { struct s2io_nic *nic = fifo_data->nic; - struct net_device *dev = (struct net_device *) nic->dev; struct tx_curr_get_info get_info, put_info; - struct sk_buff *skb; + struct sk_buff *skb = NULL; struct TxD *txdlp; + int pkt_cnt = 0; unsigned long flags = 0; u8 err_mask; @@ -3036,6 +3133,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data) DBG_PRINT(ERR_DBG, "in Tx Free Intr\n"); return; } + pkt_cnt++; /* Updating the statistics block */ nic->stats.tx_bytes += skb->len; @@ -3051,8 +3149,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data) get_info.offset; } - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); + s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq); spin_unlock_irqrestore(&fifo_data->tx_lock, flags); } @@ -3933,8 +4030,7 @@ static int s2io_open(struct net_device *dev) err = -ENODEV; goto hw_init_failed; } - - netif_start_queue(dev); + s2io_start_all_tx_queue(sp); return 0; hw_init_failed: @@ -3979,8 +4075,7 @@ static int s2io_close(struct net_device *dev) if (!is_s2io_card_up(sp)) return 0; - netif_stop_queue(dev); - + s2io_stop_all_tx_queue(sp); /* delete all populated mac entries */ for (offset = 1; offset < config->max_mc_addr; offset++) { tmp64 = do_s2io_read_unicast_mc(sp, offset); @@ -4016,7 +4111,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) struct TxFIFO_element __iomem *tx_fifo; unsigned long flags = 0; u16 vlan_tag = 0; - int vlan_priority = 0; struct fifo_info *fifo = NULL; struct mac_info *mac_control; struct config_param *config; @@ -4043,14 +4137,29 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) queue = 0; /* Get Fifo number to Transmit based on vlan priority */ - if (sp->vlgrp && vlan_tx_tag_present(skb)) { + if (sp->vlgrp && vlan_tx_tag_present(skb)) vlan_tag = vlan_tx_tag_get(skb); - vlan_priority = vlan_tag >> 13; - queue = config->fifo_mapping[vlan_priority]; - } + + /* get fifo number based on skb->priority value */ + queue = config->fifo_mapping[skb->priority & (MAX_TX_FIFOS - 1)]; fifo = &mac_control->fifos[queue]; spin_lock_irqsave(&fifo->tx_lock, flags); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (sp->config.multiq) { + if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { + spin_unlock_irqrestore(&fifo->tx_lock, flags); + return NETDEV_TX_BUSY; + } + } else +#endif + if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) { + if (netif_queue_stopped(dev)) { + spin_unlock_irqrestore(&fifo->tx_lock, flags); + return NETDEV_TX_BUSY; + } + } + put_off = (u16) fifo->tx_curr_put_info.offset; get_off = (u16) fifo->tx_curr_get_info.offset; txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr; @@ -4060,7 +4169,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) if (txdp->Host_Control || ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) { DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); - netif_stop_queue(dev); + s2io_stop_tx_queue(sp, fifo->fifo_no); dev_kfree_skb(skb); spin_unlock_irqrestore(&fifo->tx_lock, flags); return 0; @@ -4080,7 +4189,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_LIST_OWN_XENA; txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no); - if (sp->vlgrp && vlan_tx_tag_present(skb)) { + if (vlan_tag) { txdp->Control_2 |= TXD_VLAN_ENABLE; txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); } @@ -4166,7 +4275,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) DBG_PRINT(TX_DBG, "No free TxDs for xmit, Put: 0x%x Get:0x%x\n", put_off, get_off); - netif_stop_queue(dev); + s2io_stop_tx_queue(sp, fifo->fifo_no); } mac_control->stats_info->sw_stat.mem_allocated += skb->truesize; dev->trans_start = jiffies; @@ -4175,7 +4284,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; pci_map_failed: stats->pci_map_fail_cnt++; - netif_stop_queue(dev); + s2io_stop_tx_queue(sp, fifo->fifo_no); stats->mem_freed += skb->truesize; dev_kfree_skb(skb); spin_unlock_irqrestore(&fifo->tx_lock, flags); @@ -4587,7 +4696,7 @@ static void s2io_handle_errors(void * dev_id) return; reset: - netif_stop_queue(dev); + s2io_stop_all_tx_queue(sp); schedule_work(&sp->rst_timer_task); sw_stat->soft_reset_cnt++; return; @@ -6574,16 +6683,15 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; if (netif_running(dev)) { + s2io_stop_all_tx_queue(sp); s2io_card_down(sp); - netif_stop_queue(dev); ret = s2io_card_up(sp); if (ret) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", __FUNCTION__); return ret; } - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); + s2io_wake_all_tx_queue(sp); } else { /* Device is down */ struct XENA_dev_config __iomem *bar0 = sp->bar0; u64 val64 = new_mtu; @@ -6691,7 +6799,7 @@ static void s2io_set_link(struct work_struct *work) } else { DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name); DBG_PRINT(ERR_DBG, "device is not Quiescent\n"); - netif_stop_queue(dev); + s2io_stop_all_tx_queue(nic); } } val64 = readq(&bar0->adapter_control); @@ -7181,7 +7289,7 @@ static void s2io_restart_nic(struct work_struct *work) DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); } - netif_wake_queue(dev); + s2io_wake_all_tx_queue(sp); DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); out_unlock: @@ -7460,6 +7568,7 @@ static void s2io_link(struct s2io_nic * sp, int link) init_tti(sp, link); if (link == LINK_DOWN) { DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name); + s2io_stop_all_tx_queue(sp); netif_carrier_off(dev); if(sp->mac_control.stats_info->sw_stat.link_up_cnt) sp->mac_control.stats_info->sw_stat.link_up_time = @@ -7472,6 +7581,7 @@ static void s2io_link(struct s2io_nic * sp, int link) jiffies - sp->start_time; sp->mac_control.stats_info->sw_stat.link_up_cnt++; netif_carrier_on(dev); + s2io_wake_all_tx_queue(sp); } } sp->last_link_state = link; @@ -7508,7 +7618,8 @@ static void s2io_init_pci(struct s2io_nic * sp) pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); } -static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) +static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, + u8 *dev_multiq) { if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < FIFO_DEFAULT_NUM)) { @@ -7522,6 +7633,18 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) DBG_PRINT(ERR_DBG, "tx fifos\n"); } +#ifndef CONFIG_NETDEVICES_MULTIQUEUE + if (multiq) { + DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n"); + multiq = 0; + } +#endif + /* if multiqueue is enabled configure all fifos */ + if (multiq) { + tx_fifo_num = MAX_TX_FIFOS; + *dev_multiq = multiq; + } + if ( rx_ring_num > 8) { DBG_PRINT(ERR_DBG, "s2io: Requested number of Rx rings not " "supported\n"); @@ -7613,9 +7736,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) struct config_param *config; int mode; u8 dev_intr_type = intr_type; + u8 dev_multiq = 0; DECLARE_MAC_BUF(mac); - if ((ret = s2io_verify_parm(pdev, &dev_intr_type))) + ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq); + if (ret) return ret; if ((ret = pci_enable_device(pdev))) { @@ -7646,7 +7771,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) pci_disable_device(pdev); return -ENODEV; } - +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (dev_multiq) + dev = alloc_etherdev_mq(sizeof(struct s2io_nic), MAX_TX_FIFOS); + else +#endif dev = alloc_etherdev(sizeof(struct s2io_nic)); if (dev == NULL) { DBG_PRINT(ERR_DBG, "Device allocation failed\n"); @@ -7698,6 +7827,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* Tx side parameters. */ config->tx_fifo_num = tx_fifo_num; + config->multiq = dev_multiq; for (i = 0; i < MAX_TX_FIFOS; i++) { config->tx_cfg[i].fifo_len = tx_fifo_len[i]; config->tx_cfg[i].fifo_priority = i; @@ -7705,7 +7835,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* mapping the QoS priority to the configured fifos */ for (i = 0; i < MAX_TX_FIFOS; i++) - config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i]; + config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i]; config->tx_intr_type = TXD_INT_TYPE_UTILZ; for (i = 0; i < config->tx_fifo_num; i++) { @@ -7810,7 +7940,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_UFO; dev->features |= NETIF_F_HW_CSUM; } - +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (config->multiq) + dev->features |= NETIF_F_MULTI_QUEUE; +#endif dev->tx_timeout = &s2io_tx_watchdog; dev->watchdog_timeo = WATCH_DOG_TIMEOUT; INIT_WORK(&sp->rst_timer_task, s2io_restart_nic); @@ -7959,6 +8092,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (napi) DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); + + DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, + sp->config.tx_fifo_num); + switch(sp->config.intr_type) { case INTA: DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); @@ -7967,6 +8104,15 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name); break; } + if (sp->config.multiq) { + for (i = 0; i < sp->config.tx_fifo_num; i++) + mac_control->fifos[i].multiq = config->multiq; + DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", + dev->name); + } else + DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", + dev->name); + if (sp->lro) DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 64b88eb..fdc0a94 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -464,6 +464,7 @@ struct config_param { int max_mc_addr; /* xena=64 herc=256 */ int max_mac_addr; /* xena=16 herc=64 */ int mc_start_offset; /* xena=16 herc=64 */ + u8 multiq; }; /* Structure representing MAC Addrs */ @@ -720,6 +721,15 @@ struct fifo_info { * the buffers */ struct tx_curr_get_info tx_curr_get_info; +#define FIFO_QUEUE_START 0 +#define FIFO_QUEUE_STOP 1 + int queue_state; + + /* copy of sp->dev pointer */ + struct net_device *dev; + + /* copy of multiq status */ + u8 multiq; /* Per fifo lock */ spinlock_t tx_lock; -- cgit v1.1 From 6cfc482b4b1c512d81712eba41fa324b24e5e7b2 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Wed, 20 Feb 2008 17:07:51 -0500 Subject: S2io: Multiqueue network device support - FIFO selection based on L4 ports - Resubmit #2 - Transmit fifo selection based on TCP/UDP ports. - Added tx_steering_type loadable parameter for transmit fifo selection. 0x0 NO_STEERING: Default FIFO is selected. 0x1 TX_PRIORITY_STEERING: FIFO is selected based on skb->priority. 0x2 TX_DEFAULT_STEERING: FIFO is selected based on L4 Ports. Signed-off-by: Surjit Reang Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++------- drivers/net/s2io.h | 34 +++++++++++++- 2 files changed, 150 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 3ddc0aa..9786de9 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -458,7 +458,7 @@ MODULE_VERSION(DRV_VERSION); /* Module Loadable parameters. */ -S2IO_PARM_INT(tx_fifo_num, 1); +S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM); S2IO_PARM_INT(rx_ring_num, 1); S2IO_PARM_INT(multiq, 0); S2IO_PARM_INT(rx_ring_mode, 1); @@ -470,6 +470,8 @@ S2IO_PARM_INT(shared_splits, 0); S2IO_PARM_INT(tmac_util_period, 5); S2IO_PARM_INT(rmac_util_period, 5); S2IO_PARM_INT(l3l4hdr_size, 128); +/* 0 is no steering, 1 is Priority steering, 2 is Default steering */ +S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING); /* Frequency of Rx desc syncs expressed as power of 2 */ S2IO_PARM_INT(rxsync_frequency, 3); /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */ @@ -4114,7 +4116,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) struct fifo_info *fifo = NULL; struct mac_info *mac_control; struct config_param *config; + int do_spin_lock = 1; int offload_type; + int enable_per_list_interrupt = 0; struct swStat *stats = &sp->mac_control.stats_info->sw_stat; mac_control = &sp->mac_control; @@ -4136,15 +4140,52 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } queue = 0; - /* Get Fifo number to Transmit based on vlan priority */ if (sp->vlgrp && vlan_tx_tag_present(skb)) vlan_tag = vlan_tx_tag_get(skb); + if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) { + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *ip; + struct tcphdr *th; + ip = ip_hdr(skb); + + if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { + th = (struct tcphdr *)(((unsigned char *)ip) + + ip->ihl*4); + + if (ip->protocol == IPPROTO_TCP) { + queue_len = sp->total_tcp_fifos; + queue = (ntohs(th->source) + + ntohs(th->dest)) & + sp->fifo_selector[queue_len - 1]; + if (queue >= queue_len) + queue = queue_len - 1; + } else if (ip->protocol == IPPROTO_UDP) { + queue_len = sp->total_udp_fifos; + queue = (ntohs(th->source) + + ntohs(th->dest)) & + sp->fifo_selector[queue_len - 1]; + if (queue >= queue_len) + queue = queue_len - 1; + queue += sp->udp_fifo_idx; + if (skb->len > 1024) + enable_per_list_interrupt = 1; + do_spin_lock = 0; + } + } + } + } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING) + /* get fifo number based on skb->priority value */ + queue = config->fifo_mapping + [skb->priority & (MAX_TX_FIFOS - 1)]; + fifo = &mac_control->fifos[queue]; - /* get fifo number based on skb->priority value */ - queue = config->fifo_mapping[skb->priority & (MAX_TX_FIFOS - 1)]; + if (do_spin_lock) + spin_lock_irqsave(&fifo->tx_lock, flags); + else { + if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) + return NETDEV_TX_LOCKED; + } - fifo = &mac_control->fifos[queue]; - spin_lock_irqsave(&fifo->tx_lock, flags); #ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { @@ -4188,7 +4229,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_GATHER_CODE_FIRST; txdp->Control_1 |= TXD_LIST_OWN_XENA; txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no); - + if (enable_per_list_interrupt) + if (put_off & (queue_len >> 5)) + txdp->Control_2 |= TXD_INT_TYPE_PER_LIST; if (vlan_tag) { txdp->Control_2 |= TXD_VLAN_ENABLE; txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); @@ -7622,13 +7665,15 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, u8 *dev_multiq) { if ((tx_fifo_num > MAX_TX_FIFOS) || - (tx_fifo_num < FIFO_DEFAULT_NUM)) { + (tx_fifo_num < 1)) { DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos " "(%d) not supported\n", tx_fifo_num); - tx_fifo_num = - ((tx_fifo_num > MAX_TX_FIFOS)? MAX_TX_FIFOS : - ((tx_fifo_num < FIFO_DEFAULT_NUM) ? FIFO_DEFAULT_NUM : - tx_fifo_num)); + + if (tx_fifo_num < 1) + tx_fifo_num = 1; + else + tx_fifo_num = MAX_TX_FIFOS; + DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num); DBG_PRINT(ERR_DBG, "tx fifos\n"); } @@ -7639,10 +7684,23 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, multiq = 0; } #endif - /* if multiqueue is enabled configure all fifos */ - if (multiq) { - tx_fifo_num = MAX_TX_FIFOS; + if (multiq) *dev_multiq = multiq; + + if (tx_steering_type && (1 == tx_fifo_num)) { + if (tx_steering_type != TX_DEFAULT_STEERING) + DBG_PRINT(ERR_DBG, + "s2io: Tx steering is not supported with " + "one fifo. Disabling Tx steering.\n"); + tx_steering_type = NO_STEERING; + } + + if ((tx_steering_type < NO_STEERING) || + (tx_steering_type > TX_DEFAULT_STEERING)) { + DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not " + "supported\n"); + DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n"); + tx_steering_type = NO_STEERING; } if ( rx_ring_num > 8) { @@ -7773,7 +7831,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } #ifdef CONFIG_NETDEVICES_MULTIQUEUE if (dev_multiq) - dev = alloc_etherdev_mq(sizeof(struct s2io_nic), MAX_TX_FIFOS); + dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num); else #endif dev = alloc_etherdev(sizeof(struct s2io_nic)); @@ -7824,11 +7882,33 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config = &sp->config; config->napi = napi; + config->tx_steering_type = tx_steering_type; /* Tx side parameters. */ - config->tx_fifo_num = tx_fifo_num; + if (config->tx_steering_type == TX_PRIORITY_STEERING) + config->tx_fifo_num = MAX_TX_FIFOS; + else + config->tx_fifo_num = tx_fifo_num; + + /* Initialize the fifos used for tx steering */ + if (config->tx_fifo_num < 5) { + if (config->tx_fifo_num == 1) + sp->total_tcp_fifos = 1; + else + sp->total_tcp_fifos = config->tx_fifo_num - 1; + sp->udp_fifo_idx = config->tx_fifo_num - 1; + sp->total_udp_fifos = 1; + sp->other_fifo_idx = sp->total_tcp_fifos - 1; + } else { + sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM - + FIFO_OTHER_MAX_NUM); + sp->udp_fifo_idx = sp->total_tcp_fifos; + sp->total_udp_fifos = FIFO_UDP_MAX_NUM; + sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM; + } + config->multiq = dev_multiq; - for (i = 0; i < MAX_TX_FIFOS; i++) { + for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].fifo_len = tx_fifo_len[i]; config->tx_cfg[i].fifo_priority = i; } @@ -7837,6 +7917,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) for (i = 0; i < MAX_TX_FIFOS; i++) config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i]; + /* map the hashing selector table to the configured fifos */ + for (i = 0; i < config->tx_fifo_num; i++) + sp->fifo_selector[i] = fifo_selector[i]; + + config->tx_intr_type = TXD_INT_TYPE_UTILZ; for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].f_no_snoop = @@ -8113,6 +8198,20 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", dev->name); + switch (sp->config.tx_steering_type) { + case NO_STEERING: + DBG_PRINT(ERR_DBG, "%s: No steering enabled for" + " transmit\n", dev->name); + break; + case TX_PRIORITY_STEERING: + DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for" + " transmit\n", dev->name); + break; + case TX_DEFAULT_STEERING: + DBG_PRINT(ERR_DBG, "%s: Default steering enabled for" + " transmit\n", dev->name); + } + if (sp->lro) DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index fdc0a94..5e351c0 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -360,7 +360,10 @@ struct stat_block { #define MAX_TX_FIFOS 8 #define MAX_RX_RINGS 8 -#define FIFO_DEFAULT_NUM 1 +#define FIFO_DEFAULT_NUM 5 +#define FIFO_UDP_MAX_NUM 2 /* 0 - even, 1 -odd ports */ +#define FIFO_OTHER_MAX_NUM 1 + #define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 ) #define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 ) @@ -379,6 +382,8 @@ static int fifo_map[][MAX_TX_FIFOS] = { {0, 1, 2, 3, 4, 5, 6, 7}, }; +static u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7}; + /* Maintains Per FIFO related information. */ struct tx_fifo_config { #define MAX_AVAILABLE_TXDS 8192 @@ -431,6 +436,12 @@ struct config_param { /* Tx Side */ u32 tx_fifo_num; /*Number of Tx FIFOs */ + /* 0-No steering, 1-Priority steering, 2-Default fifo map */ +#define NO_STEERING 0 +#define TX_PRIORITY_STEERING 0x1 +#define TX_DEFAULT_STEERING 0x2 + u8 tx_steering_type; + u8 fifo_mapping[MAX_TX_FIFOS]; struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */ u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */ @@ -895,6 +906,27 @@ struct s2io_nic { */ int rx_csum; + /* Below variables are used for fifo selection to transmit a packet */ + u16 fifo_selector[MAX_TX_FIFOS]; + + /* Total fifos for tcp packets */ + u8 total_tcp_fifos; + + /* + * Beginning index of udp for udp packets + * Value will be equal to + * (tx_fifo_num - FIFO_UDP_MAX_NUM - FIFO_OTHER_MAX_NUM) + */ + u8 udp_fifo_idx; + + u8 total_udp_fifos; + + /* + * Beginning index of fifo for all other packets + * Value will be equal to (tx_fifo_num - FIFO_OTHER_MAX_NUM) + */ + u8 other_fifo_idx; + /* after blink, the adapter must be restored with original * values. */ -- cgit v1.1 From cdb5bf02f4fc0507518ea6b93c21b2707336ffef Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Wed, 20 Feb 2008 17:09:15 -0500 Subject: S2io: Support for vlan_rx_kill_vid entry point - Resubmit #3 - Added s2io_vlan_rx_kill_vid entry point function for unregistering vlan. - Fix to aggregate vlan packets. IP offset is incremented by 4 bytes if the packet contains vlan header. Signed-off-by: Surjit Reang Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 115 +++++++++++++++++++++++++++++++---------------------- drivers/net/s2io.h | 6 ++- 2 files changed, 71 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 9786de9..0d65aae 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -388,6 +388,26 @@ static void s2io_vlan_rx_register(struct net_device *dev, /* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */ static int vlan_strip_flag; +/* Unregister the vlan */ +static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) +{ + int i; + struct s2io_nic *nic = dev->priv; + unsigned long flags[MAX_TX_FIFOS]; + struct mac_info *mac_control = &nic->mac_control; + struct config_param *config = &nic->config; + + for (i = 0; i < config->tx_fifo_num; i++) + spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]); + + if (nic->vlgrp) + vlan_group_set_device(nic->vlgrp, vid, NULL); + + for (i = config->tx_fifo_num - 1; i >= 0; i--) + spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, + flags[i]); +} + /* * Constants to be programmed into the Xena's registers, to configure * the XAUI. @@ -3047,7 +3067,7 @@ static void rx_intr_handler(struct ring_info *ring_data) struct lro *lro = &nic->lro0_n[i]; if (lro->in_use) { update_L3L4_header(nic, lro); - queue_rx_frame(lro->parent); + queue_rx_frame(lro->parent, lro->vlan_tag); clear_lro_session(lro); } } @@ -7522,7 +7542,8 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) { lro_append_pkt(sp, lro, skb, tcp_len); - queue_rx_frame(lro->parent); + queue_rx_frame(lro->parent, + lro->vlan_tag); clear_lro_session(lro); sp->mac_control.stats_info-> sw_stat.flush_max_pkts++; @@ -7533,7 +7554,8 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) lro->frags_len; sp->mac_control.stats_info-> sw_stat.sending_both++; - queue_rx_frame(lro->parent); + queue_rx_frame(lro->parent, + lro->vlan_tag); clear_lro_session(lro); goto send_up; case 0: /* sessions exceeded */ @@ -7559,31 +7581,12 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) */ skb->ip_summed = CHECKSUM_NONE; } - } else { + } else skb->ip_summed = CHECKSUM_NONE; - } + sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; - if (!sp->lro) { - skb->protocol = eth_type_trans(skb, dev); - if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) && - vlan_strip_flag)) { - /* Queueing the vlan frame to the upper layer */ - if (napi) - vlan_hwaccel_receive_skb(skb, sp->vlgrp, - RXD_GET_VLAN_TAG(rxdp->Control_2)); - else - vlan_hwaccel_rx(skb, sp->vlgrp, - RXD_GET_VLAN_TAG(rxdp->Control_2)); - } else { - if (napi) - netif_receive_skb(skb); - else - netif_rx(skb); - } - } else { send_up: - queue_rx_frame(skb); - } + queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2)); dev->last_rx = jiffies; aggregate: atomic_dec(&sp->rx_bufs_left[ring_no]); @@ -8005,6 +8008,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; dev->vlan_rx_register = s2io_vlan_rx_register; + dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid; /* * will use eth_mac_addr() for dev->set_mac_address @@ -8306,7 +8310,8 @@ module_init(s2io_starter); module_exit(s2io_closer); static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip, - struct tcphdr **tcp, struct RxD_t *rxdp) + struct tcphdr **tcp, struct RxD_t *rxdp, + struct s2io_nic *sp) { int ip_off; u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len; @@ -8317,19 +8322,20 @@ static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip, return -1; } - /* TODO: - * By default the VLAN field in the MAC is stripped by the card, if this - * feature is turned off in rx_pa_cfg register, then the ip_off field - * has to be shifted by a further 2 bytes - */ - switch (l2_type) { - case 0: /* DIX type */ - case 4: /* DIX type with VLAN */ - ip_off = HEADER_ETHERNET_II_802_3_SIZE; - break; + /* Checking for DIX type or DIX type with VLAN */ + if ((l2_type == 0) + || (l2_type == 4)) { + ip_off = HEADER_ETHERNET_II_802_3_SIZE; + /* + * If vlan stripping is disabled and the frame is VLAN tagged, + * shift the offset by the VLAN header size bytes. + */ + if ((!vlan_strip_flag) && + (rxdp->Control_1 & RXD_FRAME_VLAN_TAG)) + ip_off += HEADER_VLAN_SIZE; + } else { /* LLC, SNAP etc are considered non-mergeable */ - default: - return -1; + return -1; } *ip = (struct iphdr *)((u8 *)buffer + ip_off); @@ -8356,7 +8362,7 @@ static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp) } static void initiate_new_session(struct lro *lro, u8 *l2h, - struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len) + struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag) { DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__); lro->l2h = l2h; @@ -8367,6 +8373,7 @@ static void initiate_new_session(struct lro *lro, u8 *l2h, lro->sg_num = 1; lro->total_len = ntohs(ip->tot_len); lro->frags_len = 0; + lro->vlan_tag = vlan_tag; /* * check if we saw TCP timestamp. Other consistency checks have * already been done. @@ -8498,15 +8505,16 @@ s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro, struct iphdr *ip; struct tcphdr *tcph; int ret = 0, i; + u16 vlan_tag = 0; if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp, - rxdp))) { + rxdp, sp))) { DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr); - } else { + } else return ret; - } + vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2); tcph = (struct tcphdr *)*tcp; *tcp_len = get_l4_pyld_length(ip, tcph); for (i=0; idev; + struct s2io_nic *sp = dev->priv; skb->protocol = eth_type_trans(skb, dev); - if (napi) - netif_receive_skb(skb); - else - netif_rx(skb); + if (sp->vlgrp && vlan_tag + && (vlan_strip_flag)) { + /* Queueing the vlan frame to the upper layer */ + if (sp->config.napi) + vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag); + else + vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag); + } else { + if (sp->config.napi) + netif_receive_skb(skb); + else + netif_rx(skb); + } } static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro, diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 5e351c0..e68fdf7 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -546,6 +546,7 @@ struct RxD_t { #define RXD_OWN_XENA s2BIT(7) #define RXD_T_CODE (s2BIT(12)|s2BIT(13)|s2BIT(14)|s2BIT(15)) #define RXD_FRAME_PROTO vBIT(0xFFFF,24,8) +#define RXD_FRAME_VLAN_TAG s2BIT(24) #define RXD_FRAME_PROTO_IPV4 s2BIT(27) #define RXD_FRAME_PROTO_IPV6 s2BIT(28) #define RXD_FRAME_IP_FRAG s2BIT(29) @@ -829,10 +830,11 @@ struct lro { int sg_num; int in_use; __be16 window; + u16 vlan_tag; u32 cur_tsval; __be32 cur_tsecr; u8 saw_ts; -}; +} ____cacheline_aligned; /* These flags represent the devices temporary state */ enum s2io_device_state_t @@ -1129,7 +1131,7 @@ static int s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro, struct RxD_t *rxdp, struct s2io_nic *sp); static void clear_lro_session(struct lro *lro); -static void queue_rx_frame(struct sk_buff *skb); +static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag); static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro); static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro, struct sk_buff *skb, u32 tcp_len); -- cgit v1.1 From cf374a855363ea2ad06a1c08fc513024295334cc Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Wed, 20 Feb 2008 17:10:28 -0500 Subject: S2io: Version update for multiqueue and vlan patches - Updated version number. Signed-off-by: Surjit Reang Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0d65aae..6d8e5c4 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -86,7 +86,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.15-2" +#define DRV_VERSION "2.0.26.19" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -- cgit v1.1 From cfdfa86536d2fbc8102780ec15faea185e957d3d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 22 Feb 2008 19:55:05 +0900 Subject: smc91x: pass along private data V2 Pass a private data pointer to macros and functions. This makes it easy to later on make run time decisions. This patch does not change any logic. These changes should be optimized away during compilation. V2 changes the macro argument name from "priv" to "lp". Signed-off-by: Magnus Damm Acked-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 301 ++++++++++++++++++++++++++------------------------- drivers/net/smc91x.h | 254 ++++++++++++++++++++++--------------------- 2 files changed, 280 insertions(+), 275 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 4020e9e..d0ef80a 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -220,22 +220,22 @@ static void PRINT_PKT(u_char *buf, int length) /* this enables an interrupt in the interrupt mask register */ -#define SMC_ENABLE_INT(x) do { \ +#define SMC_ENABLE_INT(lp, x) do { \ unsigned char mask; \ spin_lock_irq(&lp->lock); \ - mask = SMC_GET_INT_MASK(); \ + mask = SMC_GET_INT_MASK(lp); \ mask |= (x); \ - SMC_SET_INT_MASK(mask); \ + SMC_SET_INT_MASK(lp, mask); \ spin_unlock_irq(&lp->lock); \ } while (0) /* this disables an interrupt from the interrupt mask register */ -#define SMC_DISABLE_INT(x) do { \ +#define SMC_DISABLE_INT(lp, x) do { \ unsigned char mask; \ spin_lock_irq(&lp->lock); \ - mask = SMC_GET_INT_MASK(); \ + mask = SMC_GET_INT_MASK(lp); \ mask &= ~(x); \ - SMC_SET_INT_MASK(mask); \ + SMC_SET_INT_MASK(lp, mask); \ spin_unlock_irq(&lp->lock); \ } while (0) @@ -244,10 +244,10 @@ static void PRINT_PKT(u_char *buf, int length) * if at all, but let's avoid deadlocking the system if the hardware * decides to go south. */ -#define SMC_WAIT_MMU_BUSY() do { \ - if (unlikely(SMC_GET_MMU_CMD() & MC_BUSY)) { \ +#define SMC_WAIT_MMU_BUSY(lp) do { \ + if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) { \ unsigned long timeout = jiffies + 2; \ - while (SMC_GET_MMU_CMD() & MC_BUSY) { \ + while (SMC_GET_MMU_CMD(lp) & MC_BUSY) { \ if (time_after(jiffies, timeout)) { \ printk("%s: timeout %s line %d\n", \ dev->name, __FILE__, __LINE__); \ @@ -273,8 +273,8 @@ static void smc_reset(struct net_device *dev) /* Disable all interrupts, block TX tasklet */ spin_lock_irq(&lp->lock); - SMC_SELECT_BANK(2); - SMC_SET_INT_MASK(0); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, 0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; spin_unlock_irq(&lp->lock); @@ -290,15 +290,15 @@ static void smc_reset(struct net_device *dev) * This resets the registers mostly to defaults, but doesn't * affect EEPROM. That seems unnecessary */ - SMC_SELECT_BANK(0); - SMC_SET_RCR(RCR_SOFTRST); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_SOFTRST); /* * Setup the Configuration Register * This is necessary because the CONFIG_REG is not affected * by a soft reset */ - SMC_SELECT_BANK(1); + SMC_SELECT_BANK(lp, 1); cfg = CONFIG_DEFAULT; @@ -316,7 +316,7 @@ static void smc_reset(struct net_device *dev) */ cfg |= CONFIG_EPH_POWER_EN; - SMC_SET_CONFIG(cfg); + SMC_SET_CONFIG(lp, cfg); /* this should pause enough for the chip to be happy */ /* @@ -329,12 +329,12 @@ static void smc_reset(struct net_device *dev) udelay(1); /* Disable transmit and receive functionality */ - SMC_SELECT_BANK(0); - SMC_SET_RCR(RCR_CLEAR); - SMC_SET_TCR(TCR_CLEAR); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_CLEAR); + SMC_SET_TCR(lp, TCR_CLEAR); - SMC_SELECT_BANK(1); - ctl = SMC_GET_CTL() | CTL_LE_ENABLE; + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE; /* * Set the control register to automatically release successfully @@ -345,12 +345,12 @@ static void smc_reset(struct net_device *dev) ctl |= CTL_AUTO_RELEASE; else ctl &= ~CTL_AUTO_RELEASE; - SMC_SET_CTL(ctl); + SMC_SET_CTL(lp, ctl); /* Reset the MMU */ - SMC_SELECT_BANK(2); - SMC_SET_MMU_CMD(MC_RESET); - SMC_WAIT_MMU_BUSY(); + SMC_SELECT_BANK(lp, 2); + SMC_SET_MMU_CMD(lp, MC_RESET); + SMC_WAIT_MMU_BUSY(lp); } /* @@ -365,19 +365,19 @@ static void smc_enable(struct net_device *dev) DBG(2, "%s: %s\n", dev->name, __FUNCTION__); /* see the header file for options in TCR/RCR DEFAULT */ - SMC_SELECT_BANK(0); - SMC_SET_TCR(lp->tcr_cur_mode); - SMC_SET_RCR(lp->rcr_cur_mode); + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); + SMC_SET_RCR(lp, lp->rcr_cur_mode); - SMC_SELECT_BANK(1); - SMC_SET_MAC_ADDR(dev->dev_addr); + SMC_SELECT_BANK(lp, 1); + SMC_SET_MAC_ADDR(lp, dev->dev_addr); /* now, enable interrupts */ mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT; if (lp->version >= (CHIP_91100 << 4)) mask |= IM_MDINT; - SMC_SELECT_BANK(2); - SMC_SET_INT_MASK(mask); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, mask); /* * From this point the register bank must _NOT_ be switched away @@ -400,8 +400,8 @@ static void smc_shutdown(struct net_device *dev) /* no more interrupts for me */ spin_lock_irq(&lp->lock); - SMC_SELECT_BANK(2); - SMC_SET_INT_MASK(0); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, 0); pending_skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; spin_unlock_irq(&lp->lock); @@ -409,14 +409,14 @@ static void smc_shutdown(struct net_device *dev) dev_kfree_skb(pending_skb); /* and tell the card to stay away from that nasty outside world */ - SMC_SELECT_BANK(0); - SMC_SET_RCR(RCR_CLEAR); - SMC_SET_TCR(TCR_CLEAR); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_CLEAR); + SMC_SET_TCR(lp, TCR_CLEAR); #ifdef POWER_DOWN /* finally, shut the chip down */ - SMC_SELECT_BANK(1); - SMC_SET_CONFIG(SMC_GET_CONFIG() & ~CONFIG_EPH_POWER_EN); + SMC_SELECT_BANK(lp, 1); + SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN); #endif } @@ -431,17 +431,17 @@ static inline void smc_rcv(struct net_device *dev) DBG(3, "%s: %s\n", dev->name, __FUNCTION__); - packet_number = SMC_GET_RXFIFO(); + packet_number = SMC_GET_RXFIFO(lp); if (unlikely(packet_number & RXFIFO_REMPTY)) { PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name); return; } /* read from start of packet */ - SMC_SET_PTR(PTR_READ | PTR_RCV | PTR_AUTOINC); + SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC); /* First two words are status and packet length */ - SMC_GET_PKT_HDR(status, packet_len); + SMC_GET_PKT_HDR(lp, status, packet_len); packet_len &= 0x07ff; /* mask off top bits */ DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n", dev->name, packet_number, status, @@ -460,8 +460,8 @@ static inline void smc_rcv(struct net_device *dev) dev->name, packet_len, status); status |= RS_TOOSHORT; } - SMC_WAIT_MMU_BUSY(); - SMC_SET_MMU_CMD(MC_RELEASE); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); dev->stats.rx_errors++; if (status & RS_ALGNERR) dev->stats.rx_frame_errors++; @@ -490,8 +490,8 @@ static inline void smc_rcv(struct net_device *dev) if (unlikely(skb == NULL)) { printk(KERN_NOTICE "%s: Low memory, packet dropped.\n", dev->name); - SMC_WAIT_MMU_BUSY(); - SMC_SET_MMU_CMD(MC_RELEASE); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); dev->stats.rx_dropped++; return; } @@ -510,10 +510,10 @@ static inline void smc_rcv(struct net_device *dev) */ data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6); data = skb_put(skb, data_len); - SMC_PULL_DATA(data, packet_len - 4); + SMC_PULL_DATA(lp, data, packet_len - 4); - SMC_WAIT_MMU_BUSY(); - SMC_SET_MMU_CMD(MC_RELEASE); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); PRINT_PKT(data, packet_len - 4); @@ -591,7 +591,7 @@ static void smc_hardware_send_pkt(unsigned long data) } lp->pending_tx_skb = NULL; - packet_no = SMC_GET_AR(); + packet_no = SMC_GET_AR(lp); if (unlikely(packet_no & AR_FAILED)) { printk("%s: Memory allocation failed.\n", dev->name); dev->stats.tx_errors++; @@ -601,8 +601,8 @@ static void smc_hardware_send_pkt(unsigned long data) } /* point to the beginning of the packet */ - SMC_SET_PN(packet_no); - SMC_SET_PTR(PTR_AUTOINC); + SMC_SET_PN(lp, packet_no); + SMC_SET_PTR(lp, PTR_AUTOINC); buf = skb->data; len = skb->len; @@ -614,13 +614,13 @@ static void smc_hardware_send_pkt(unsigned long data) * Send the packet length (+6 for status words, length, and ctl. * The card will pad to 64 bytes with zeroes if packet is too small. */ - SMC_PUT_PKT_HDR(0, len + 6); + SMC_PUT_PKT_HDR(lp, 0, len + 6); /* send the actual data */ - SMC_PUSH_DATA(buf, len & ~1); + SMC_PUSH_DATA(lp, buf, len & ~1); /* Send final ctl word with the last byte if there is one */ - SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG); + SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp)); /* * If THROTTLE_TX_PKTS is set, we stop the queue here. This will @@ -634,14 +634,14 @@ static void smc_hardware_send_pkt(unsigned long data) netif_stop_queue(dev); /* queue the packet for TX */ - SMC_SET_MMU_CMD(MC_ENQUEUE); + SMC_SET_MMU_CMD(lp, MC_ENQUEUE); smc_special_unlock(&lp->lock); dev->trans_start = jiffies; dev->stats.tx_packets++; dev->stats.tx_bytes += len; - SMC_ENABLE_INT(IM_TX_INT | IM_TX_EMPTY_INT); + SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT); done: if (!THROTTLE_TX_PKTS) netif_wake_queue(dev); @@ -688,7 +688,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) smc_special_lock(&lp->lock); /* now, try to allocate the memory */ - SMC_SET_MMU_CMD(MC_ALLOC | numPages); + SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages); /* * Poll the chip for a short amount of time in case the @@ -696,9 +696,9 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) */ poll_count = MEMORY_WAIT_TIME; do { - status = SMC_GET_INT(); + status = SMC_GET_INT(lp); if (status & IM_ALLOC_INT) { - SMC_ACK_INT(IM_ALLOC_INT); + SMC_ACK_INT(lp, IM_ALLOC_INT); break; } } while (--poll_count); @@ -710,7 +710,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) /* oh well, wait until the chip finds memory later */ netif_stop_queue(dev); DBG(2, "%s: TX memory allocation deferred.\n", dev->name); - SMC_ENABLE_INT(IM_ALLOC_INT); + SMC_ENABLE_INT(lp, IM_ALLOC_INT); } else { /* * Allocation succeeded: push packet to the chip's own memory @@ -736,19 +736,19 @@ static void smc_tx(struct net_device *dev) DBG(3, "%s: %s\n", dev->name, __FUNCTION__); /* If the TX FIFO is empty then nothing to do */ - packet_no = SMC_GET_TXFIFO(); + packet_no = SMC_GET_TXFIFO(lp); if (unlikely(packet_no & TXFIFO_TEMPTY)) { PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name); return; } /* select packet to read from */ - saved_packet = SMC_GET_PN(); - SMC_SET_PN(packet_no); + saved_packet = SMC_GET_PN(lp); + SMC_SET_PN(lp, packet_no); /* read the first word (status word) from this packet */ - SMC_SET_PTR(PTR_AUTOINC | PTR_READ); - SMC_GET_PKT_HDR(tx_status, pkt_len); + SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ); + SMC_GET_PKT_HDR(lp, tx_status, pkt_len); DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n", dev->name, tx_status, packet_no); @@ -771,17 +771,17 @@ static void smc_tx(struct net_device *dev) } /* kill the packet */ - SMC_WAIT_MMU_BUSY(); - SMC_SET_MMU_CMD(MC_FREEPKT); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_FREEPKT); /* Don't restore Packet Number Reg until busy bit is cleared */ - SMC_WAIT_MMU_BUSY(); - SMC_SET_PN(saved_packet); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_PN(lp, saved_packet); /* re-enable transmit */ - SMC_SELECT_BANK(0); - SMC_SET_TCR(lp->tcr_cur_mode); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); + SMC_SELECT_BANK(lp, 2); } @@ -793,7 +793,7 @@ static void smc_mii_out(struct net_device *dev, unsigned int val, int bits) void __iomem *ioaddr = lp->base; unsigned int mii_reg, mask; - mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO); + mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO); mii_reg |= MII_MDOE; for (mask = 1 << (bits - 1); mask; mask >>= 1) { @@ -802,9 +802,9 @@ static void smc_mii_out(struct net_device *dev, unsigned int val, int bits) else mii_reg &= ~MII_MDO; - SMC_SET_MII(mii_reg); + SMC_SET_MII(lp, mii_reg); udelay(MII_DELAY); - SMC_SET_MII(mii_reg | MII_MCLK); + SMC_SET_MII(lp, mii_reg | MII_MCLK); udelay(MII_DELAY); } } @@ -815,16 +815,16 @@ static unsigned int smc_mii_in(struct net_device *dev, int bits) void __iomem *ioaddr = lp->base; unsigned int mii_reg, mask, val; - mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO); - SMC_SET_MII(mii_reg); + mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO); + SMC_SET_MII(lp, mii_reg); for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) { - if (SMC_GET_MII() & MII_MDI) + if (SMC_GET_MII(lp) & MII_MDI) val |= mask; - SMC_SET_MII(mii_reg); + SMC_SET_MII(lp, mii_reg); udelay(MII_DELAY); - SMC_SET_MII(mii_reg | MII_MCLK); + SMC_SET_MII(lp, mii_reg | MII_MCLK); udelay(MII_DELAY); } @@ -840,7 +840,7 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg) void __iomem *ioaddr = lp->base; unsigned int phydata; - SMC_SELECT_BANK(3); + SMC_SELECT_BANK(lp, 3); /* Idle - 32 ones */ smc_mii_out(dev, 0xffffffff, 32); @@ -852,12 +852,12 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg) phydata = smc_mii_in(dev, 18); /* Return to idle state */ - SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO)); + SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO)); DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", __FUNCTION__, phyaddr, phyreg, phydata); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 2); return phydata; } @@ -870,7 +870,7 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg, struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - SMC_SELECT_BANK(3); + SMC_SELECT_BANK(lp, 3); /* Idle - 32 ones */ smc_mii_out(dev, 0xffffffff, 32); @@ -879,12 +879,12 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg, smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32); /* Return to idle state */ - SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO)); + SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO)); DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", __FUNCTION__, phyaddr, phyreg, phydata); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 2); } /* @@ -957,9 +957,9 @@ static int smc_phy_fixed(struct net_device *dev) smc_phy_write(dev, phyaddr, MII_BMCR, bmcr); /* Re-Configure the Receive/Phy Control register */ - SMC_SELECT_BANK(0); - SMC_SET_RPC(lp->rpc_cur_mode); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RPC(lp, lp->rpc_cur_mode); + SMC_SELECT_BANK(lp, 2); return 1; } @@ -1050,8 +1050,8 @@ static void smc_phy_check_media(struct net_device *dev, int init) lp->tcr_cur_mode &= ~TCR_SWFDUP; } - SMC_SELECT_BANK(0); - SMC_SET_TCR(lp->tcr_cur_mode); + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); } } @@ -1100,8 +1100,8 @@ static void smc_phy_configure(struct work_struct *work) PHY_INT_SPDDET | PHY_INT_DPLXDET); /* Configure the Receive/Phy Control register */ - SMC_SELECT_BANK(0); - SMC_SET_RPC(lp->rpc_cur_mode); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RPC(lp, lp->rpc_cur_mode); /* If the user requested no auto neg, then go set his request */ if (lp->mii.force_media) { @@ -1158,7 +1158,7 @@ static void smc_phy_configure(struct work_struct *work) smc_phy_check_media(dev, 1); smc_phy_configure_exit: - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); lp->work_pending = 0; } @@ -1200,9 +1200,9 @@ static void smc_10bt_check_media(struct net_device *dev, int init) old_carrier = netif_carrier_ok(dev) ? 1 : 0; - SMC_SELECT_BANK(0); - new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0; - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 0); + new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0; + SMC_SELECT_BANK(lp, 2); if (init || (old_carrier != new_carrier)) { if (!new_carrier) { @@ -1224,11 +1224,11 @@ static void smc_eph_interrupt(struct net_device *dev) smc_10bt_check_media(dev, 0); - SMC_SELECT_BANK(1); - ctl = SMC_GET_CTL(); - SMC_SET_CTL(ctl & ~CTL_LE_ENABLE); - SMC_SET_CTL(ctl); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE); + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); } /* @@ -1252,22 +1252,22 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id) * ISR. */ SMC_INTERRUPT_PREAMBLE; - saved_pointer = SMC_GET_PTR(); - mask = SMC_GET_INT_MASK(); - SMC_SET_INT_MASK(0); + saved_pointer = SMC_GET_PTR(lp); + mask = SMC_GET_INT_MASK(lp); + SMC_SET_INT_MASK(lp, 0); /* set a timeout value, so I don't stay here forever */ timeout = MAX_IRQ_LOOPS; do { - status = SMC_GET_INT(); + status = SMC_GET_INT(lp); DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n", dev->name, status, mask, - ({ int meminfo; SMC_SELECT_BANK(0); - meminfo = SMC_GET_MIR(); - SMC_SELECT_BANK(2); meminfo; }), - SMC_GET_FIFO()); + ({ int meminfo; SMC_SELECT_BANK(lp, 0); + meminfo = SMC_GET_MIR(lp); + SMC_SELECT_BANK(lp, 2); meminfo; }), + SMC_GET_FIFO(lp)); status &= mask; if (!status) @@ -1277,7 +1277,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id) /* do this before RX as it will free memory quickly */ DBG(3, "%s: TX int\n", dev->name); smc_tx(dev); - SMC_ACK_INT(IM_TX_INT); + SMC_ACK_INT(lp, IM_TX_INT); if (THROTTLE_TX_PKTS) netif_wake_queue(dev); } else if (status & IM_RCV_INT) { @@ -1292,9 +1292,9 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id) mask &= ~IM_TX_EMPTY_INT; /* update stats */ - SMC_SELECT_BANK(0); - card_stats = SMC_GET_COUNTER(); - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 0); + card_stats = SMC_GET_COUNTER(lp); + SMC_SELECT_BANK(lp, 2); /* single collisions */ dev->stats.collisions += card_stats & 0xF; @@ -1304,26 +1304,26 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id) dev->stats.collisions += card_stats & 0xF; } else if (status & IM_RX_OVRN_INT) { DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name, - ({ int eph_st; SMC_SELECT_BANK(0); - eph_st = SMC_GET_EPH_STATUS(); - SMC_SELECT_BANK(2); eph_st; }) ); - SMC_ACK_INT(IM_RX_OVRN_INT); + ({ int eph_st; SMC_SELECT_BANK(lp, 0); + eph_st = SMC_GET_EPH_STATUS(lp); + SMC_SELECT_BANK(lp, 2); eph_st; })); + SMC_ACK_INT(lp, IM_RX_OVRN_INT); dev->stats.rx_errors++; dev->stats.rx_fifo_errors++; } else if (status & IM_EPH_INT) { smc_eph_interrupt(dev); } else if (status & IM_MDINT) { - SMC_ACK_INT(IM_MDINT); + SMC_ACK_INT(lp, IM_MDINT); smc_phy_interrupt(dev); } else if (status & IM_ERCV_INT) { - SMC_ACK_INT(IM_ERCV_INT); + SMC_ACK_INT(lp, IM_ERCV_INT); PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT \n", dev->name); } } while (--timeout); /* restore register states */ - SMC_SET_PTR(saved_pointer); - SMC_SET_INT_MASK(mask); + SMC_SET_PTR(lp, saved_pointer); + SMC_SET_INT_MASK(lp, mask); spin_unlock(&lp->lock); if (timeout == MAX_IRQ_LOOPS) @@ -1366,13 +1366,13 @@ static void smc_timeout(struct net_device *dev) DBG(2, "%s: %s\n", dev->name, __FUNCTION__); spin_lock_irq(&lp->lock); - status = SMC_GET_INT(); - mask = SMC_GET_INT_MASK(); - fifo = SMC_GET_FIFO(); - SMC_SELECT_BANK(0); - eph_st = SMC_GET_EPH_STATUS(); - meminfo = SMC_GET_MIR(); - SMC_SELECT_BANK(2); + status = SMC_GET_INT(lp); + mask = SMC_GET_INT_MASK(lp); + fifo = SMC_GET_FIFO(lp); + SMC_SELECT_BANK(lp, 0); + eph_st = SMC_GET_EPH_STATUS(lp); + meminfo = SMC_GET_MIR(lp); + SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x " "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n", @@ -1492,13 +1492,13 @@ static void smc_set_multicast_list(struct net_device *dev) } spin_lock_irq(&lp->lock); - SMC_SELECT_BANK(0); - SMC_SET_RCR(lp->rcr_cur_mode); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, lp->rcr_cur_mode); if (update_multicast) { - SMC_SELECT_BANK(3); - SMC_SET_MCAST(multicast_table); + SMC_SELECT_BANK(lp, 3); + SMC_SET_MCAST(lp, multicast_table); } - SMC_SELECT_BANK(2); + SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); } @@ -1702,8 +1702,9 @@ static const struct ethtool_ops smc_ethtool_ops = { * I just deleted auto_irq.c, since it was never built... * --jgarzik */ -static int __init smc_findirq(void __iomem *ioaddr) +static int __init smc_findirq(struct smc_local *lp) { + void __iomem *ioaddr = lp->base; int timeout = 20; unsigned long cookie; @@ -1717,14 +1718,14 @@ static int __init smc_findirq(void __iomem *ioaddr) * when done. */ /* enable ALLOCation interrupts ONLY */ - SMC_SELECT_BANK(2); - SMC_SET_INT_MASK(IM_ALLOC_INT); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, IM_ALLOC_INT); /* * Allocate 512 bytes of memory. Note that the chip was just * reset so all the memory is available */ - SMC_SET_MMU_CMD(MC_ALLOC | 1); + SMC_SET_MMU_CMD(lp, MC_ALLOC | 1); /* * Wait until positive that the interrupt has been generated @@ -1732,7 +1733,7 @@ static int __init smc_findirq(void __iomem *ioaddr) do { int int_status; udelay(10); - int_status = SMC_GET_INT(); + int_status = SMC_GET_INT(lp); if (int_status & IM_ALLOC_INT) break; /* got the interrupt */ } while (--timeout); @@ -1745,7 +1746,7 @@ static int __init smc_findirq(void __iomem *ioaddr) */ /* and disable all interrupts again */ - SMC_SET_INT_MASK(0); + SMC_SET_INT_MASK(lp, 0); /* and return what I found */ return probe_irq_off(cookie); @@ -1788,7 +1789,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__); /* First, see if the high byte is 0x33 */ - val = SMC_CURRENT_BANK(); + val = SMC_CURRENT_BANK(lp); DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val); if ((val & 0xFF00) != 0x3300) { if ((val & 0xFF) == 0x33) { @@ -1804,8 +1805,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, * The above MIGHT indicate a device, but I need to write to * further test this. */ - SMC_SELECT_BANK(0); - val = SMC_CURRENT_BANK(); + SMC_SELECT_BANK(lp, 0); + val = SMC_CURRENT_BANK(lp); if ((val & 0xFF00) != 0x3300) { retval = -ENODEV; goto err_out; @@ -1817,8 +1818,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, * register to bank 1, so I can access the base address * register */ - SMC_SELECT_BANK(1); - val = SMC_GET_BASE(); + SMC_SELECT_BANK(lp, 1); + val = SMC_GET_BASE(lp); val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { printk("%s: IOADDR %p doesn't match configuration (%x).\n", @@ -1830,8 +1831,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, * recognize. These might need to be added to later, * as future revisions could be added. */ - SMC_SELECT_BANK(3); - revision_register = SMC_GET_REV(); + SMC_SELECT_BANK(lp, 3); + revision_register = SMC_GET_REV(lp); DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register); version_string = chip_ids[ (revision_register >> 4) & 0xF]; if (!version_string || (revision_register & 0xff00) != 0x3300) { @@ -1855,8 +1856,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, spin_lock_init(&lp->lock); /* Get the MAC address */ - SMC_SELECT_BANK(1); - SMC_GET_MAC_ADDR(dev->dev_addr); + SMC_SELECT_BANK(lp, 1); + SMC_GET_MAC_ADDR(lp, dev->dev_addr); /* now, reset the chip, and put it into a known state */ smc_reset(dev); @@ -1881,7 +1882,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, trials = 3; while (trials--) { - dev->irq = smc_findirq(ioaddr); + dev->irq = smc_findirq(lp); if (dev->irq) break; /* kick the card and try again */ diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 51d4134..92ff9c4 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -720,7 +720,7 @@ smc_pxa_dma_irq(int dma, void *dummy) // Transmit Control Register /* BANK 0 */ -#define TCR_REG SMC_REG(0x0000, 0) +#define TCR_REG(lp) SMC_REG(lp, 0x0000, 0) #define TCR_ENABLE 0x0001 // When 1 we can transmit #define TCR_LOOP 0x0002 // Controls output pin LBK #define TCR_FORCOL 0x0004 // When 1 will force a collision @@ -739,7 +739,7 @@ smc_pxa_dma_irq(int dma, void *dummy) // EPH Status Register /* BANK 0 */ -#define EPH_STATUS_REG SMC_REG(0x0002, 0) +#define EPH_STATUS_REG(lp) SMC_REG(lp, 0x0002, 0) #define ES_TX_SUC 0x0001 // Last TX was successful #define ES_SNGL_COL 0x0002 // Single collision detected for last tx #define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx @@ -758,7 +758,7 @@ smc_pxa_dma_irq(int dma, void *dummy) // Receive Control Register /* BANK 0 */ -#define RCR_REG SMC_REG(0x0004, 0) +#define RCR_REG(lp) SMC_REG(lp, 0x0004, 0) #define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted #define RCR_PRMS 0x0002 // Enable promiscuous mode #define RCR_ALMUL 0x0004 // When set accepts all multicast frames @@ -775,17 +775,17 @@ smc_pxa_dma_irq(int dma, void *dummy) // Counter Register /* BANK 0 */ -#define COUNTER_REG SMC_REG(0x0006, 0) +#define COUNTER_REG(lp) SMC_REG(lp, 0x0006, 0) // Memory Information Register /* BANK 0 */ -#define MIR_REG SMC_REG(0x0008, 0) +#define MIR_REG(lp) SMC_REG(lp, 0x0008, 0) // Receive/Phy Control Register /* BANK 0 */ -#define RPC_REG SMC_REG(0x000A, 0) +#define RPC_REG(lp) SMC_REG(lp, 0x000A, 0) #define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. #define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode @@ -819,7 +819,7 @@ smc_pxa_dma_irq(int dma, void *dummy) // Configuration Reg /* BANK 1 */ -#define CONFIG_REG SMC_REG(0x0000, 1) +#define CONFIG_REG(lp) SMC_REG(lp, 0x0000, 1) #define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy #define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL #define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus @@ -831,24 +831,24 @@ smc_pxa_dma_irq(int dma, void *dummy) // Base Address Register /* BANK 1 */ -#define BASE_REG SMC_REG(0x0002, 1) +#define BASE_REG(lp) SMC_REG(lp, 0x0002, 1) // Individual Address Registers /* BANK 1 */ -#define ADDR0_REG SMC_REG(0x0004, 1) -#define ADDR1_REG SMC_REG(0x0006, 1) -#define ADDR2_REG SMC_REG(0x0008, 1) +#define ADDR0_REG(lp) SMC_REG(lp, 0x0004, 1) +#define ADDR1_REG(lp) SMC_REG(lp, 0x0006, 1) +#define ADDR2_REG(lp) SMC_REG(lp, 0x0008, 1) // General Purpose Register /* BANK 1 */ -#define GP_REG SMC_REG(0x000A, 1) +#define GP_REG(lp) SMC_REG(lp, 0x000A, 1) // Control Register /* BANK 1 */ -#define CTL_REG SMC_REG(0x000C, 1) +#define CTL_REG(lp) SMC_REG(lp, 0x000C, 1) #define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically #define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt @@ -861,7 +861,7 @@ smc_pxa_dma_irq(int dma, void *dummy) // MMU Command Register /* BANK 2 */ -#define MMU_CMD_REG SMC_REG(0x0000, 2) +#define MMU_CMD_REG(lp) SMC_REG(lp, 0x0000, 2) #define MC_BUSY 1 // When 1 the last release has not completed #define MC_NOP (0<<5) // No Op #define MC_ALLOC (1<<5) // OR with number of 256 byte packets @@ -875,30 +875,30 @@ smc_pxa_dma_irq(int dma, void *dummy) // Packet Number Register /* BANK 2 */ -#define PN_REG SMC_REG(0x0002, 2) +#define PN_REG(lp) SMC_REG(lp, 0x0002, 2) // Allocation Result Register /* BANK 2 */ -#define AR_REG SMC_REG(0x0003, 2) +#define AR_REG(lp) SMC_REG(lp, 0x0003, 2) #define AR_FAILED 0x80 // Alocation Failed // TX FIFO Ports Register /* BANK 2 */ -#define TXFIFO_REG SMC_REG(0x0004, 2) +#define TXFIFO_REG(lp) SMC_REG(lp, 0x0004, 2) #define TXFIFO_TEMPTY 0x80 // TX FIFO Empty // RX FIFO Ports Register /* BANK 2 */ -#define RXFIFO_REG SMC_REG(0x0005, 2) +#define RXFIFO_REG(lp) SMC_REG(lp, 0x0005, 2) #define RXFIFO_REMPTY 0x80 // RX FIFO Empty -#define FIFO_REG SMC_REG(0x0004, 2) +#define FIFO_REG(lp) SMC_REG(lp, 0x0004, 2) // Pointer Register /* BANK 2 */ -#define PTR_REG SMC_REG(0x0006, 2) +#define PTR_REG(lp) SMC_REG(lp, 0x0006, 2) #define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area #define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access #define PTR_READ 0x2000 // When 1 the operation is a read @@ -906,17 +906,17 @@ smc_pxa_dma_irq(int dma, void *dummy) // Data Register /* BANK 2 */ -#define DATA_REG SMC_REG(0x0008, 2) +#define DATA_REG(lp) SMC_REG(lp, 0x0008, 2) // Interrupt Status/Acknowledge Register /* BANK 2 */ -#define INT_REG SMC_REG(0x000C, 2) +#define INT_REG(lp) SMC_REG(lp, 0x000C, 2) // Interrupt Mask Register /* BANK 2 */ -#define IM_REG SMC_REG(0x000D, 2) +#define IM_REG(lp) SMC_REG(lp, 0x000D, 2) #define IM_MDINT 0x80 // PHY MI Register 18 Interrupt #define IM_ERCV_INT 0x40 // Early Receive Interrupt #define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section @@ -929,15 +929,15 @@ smc_pxa_dma_irq(int dma, void *dummy) // Multicast Table Registers /* BANK 3 */ -#define MCAST_REG1 SMC_REG(0x0000, 3) -#define MCAST_REG2 SMC_REG(0x0002, 3) -#define MCAST_REG3 SMC_REG(0x0004, 3) -#define MCAST_REG4 SMC_REG(0x0006, 3) +#define MCAST_REG1(lp) SMC_REG(lp, 0x0000, 3) +#define MCAST_REG2(lp) SMC_REG(lp, 0x0002, 3) +#define MCAST_REG3(lp) SMC_REG(lp, 0x0004, 3) +#define MCAST_REG4(lp) SMC_REG(lp, 0x0006, 3) // Management Interface Register (MII) /* BANK 3 */ -#define MII_REG SMC_REG(0x0008, 3) +#define MII_REG(lp) SMC_REG(lp, 0x0008, 3) #define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup #define MII_MDOE 0x0008 // MII Output Enable #define MII_MCLK 0x0004 // MII Clock, pin MDCLK @@ -948,20 +948,20 @@ smc_pxa_dma_irq(int dma, void *dummy) // Revision Register /* BANK 3 */ /* ( hi: chip id low: rev # ) */ -#define REV_REG SMC_REG(0x000A, 3) +#define REV_REG(lp) SMC_REG(lp, 0x000A, 3) // Early RCV Register /* BANK 3 */ /* this is NOT on SMC9192 */ -#define ERCV_REG SMC_REG(0x000C, 3) +#define ERCV_REG(lp) SMC_REG(lp, 0x000C, 3) #define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received #define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask // External Register /* BANK 7 */ -#define EXT_REG SMC_REG(0x0000, 7) +#define EXT_REG(lp) SMC_REG(lp, 0x0000, 7) #define CHIP_9192 3 @@ -1085,9 +1085,9 @@ static const char * chip_ids[ 16 ] = { */ #if SMC_DEBUG > 0 -#define SMC_REG(reg, bank) \ +#define SMC_REG(lp, reg, bank) \ ({ \ - int __b = SMC_CURRENT_BANK(); \ + int __b = SMC_CURRENT_BANK(lp); \ if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \ printk( "%s: bank reg screwed (0x%04x)\n", \ CARDNAME, __b ); \ @@ -1096,7 +1096,7 @@ static const char * chip_ids[ 16 ] = { reg<> 8) ) +#define SMC_GET_AR(lp) \ + (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG(lp))) \ + : (SMC_inw(ioaddr, PN_REG(lp)) >> 8)) -#define SMC_GET_TXFIFO() \ - ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \ - : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) ) +#define SMC_GET_TXFIFO(lp) \ + (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \ + : (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF)) -#define SMC_GET_RXFIFO() \ - ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \ - : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) ) +#define SMC_GET_RXFIFO(lp) \ + (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \ + : (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8)) -#define SMC_GET_INT() \ - ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \ - : (SMC_inw(ioaddr, INT_REG) & 0xFF) ) +#define SMC_GET_INT(lp) \ + (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG(lp))) \ + : (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF)) -#define SMC_ACK_INT(x) \ +#define SMC_ACK_INT(lp, x) \ do { \ if (SMC_CAN_USE_8BIT) \ - SMC_outb(x, ioaddr, INT_REG); \ + SMC_outb(x, ioaddr, INT_REG(lp)); \ else { \ unsigned long __flags; \ int __mask; \ local_irq_save(__flags); \ - __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ - SMC_outw( __mask | (x), ioaddr, INT_REG ); \ + __mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \ + SMC_outw(__mask | (x), ioaddr, INT_REG(lp)); \ local_irq_restore(__flags); \ } \ } while (0) -#define SMC_GET_INT_MASK() \ - ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \ - : (SMC_inw( ioaddr, INT_REG ) >> 8) ) +#define SMC_GET_INT_MASK(lp) \ + (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG(lp))) \ + : (SMC_inw(ioaddr, INT_REG(lp)) >> 8)) -#define SMC_SET_INT_MASK(x) \ +#define SMC_SET_INT_MASK(lp, x) \ do { \ if (SMC_CAN_USE_8BIT) \ - SMC_outb(x, ioaddr, IM_REG); \ + SMC_outb(x, ioaddr, IM_REG(lp)); \ else \ - SMC_outw((x) << 8, ioaddr, INT_REG); \ + SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \ } while (0) -#define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT) +#define SMC_CURRENT_BANK(lp) SMC_inw(ioaddr, BANK_SELECT) -#define SMC_SELECT_BANK(x) \ +#define SMC_SELECT_BANK(lp, x) \ do { \ if (SMC_MUST_ALIGN_WRITE) \ SMC_outl((x)<<16, ioaddr, 12<> 8; \ - __v = SMC_inw( ioaddr, ADDR1_REG ); \ + __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ addr[2] = __v; addr[3] = __v >> 8; \ - __v = SMC_inw( ioaddr, ADDR2_REG ); \ + __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ addr[4] = __v; addr[5] = __v >> 8; \ } while (0) #endif -#define SMC_SET_MAC_ADDR(addr) \ +#define SMC_SET_MAC_ADDR(lp, addr) \ do { \ - SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \ - SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \ - SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \ + SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \ + SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \ + SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \ } while (0) -#define SMC_SET_MCAST(x) \ +#define SMC_SET_MCAST(lp, x) \ do { \ const unsigned char *mt = (x); \ - SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \ - SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \ - SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \ - SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \ + SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \ + SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \ + SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \ + SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \ } while (0) -#define SMC_PUT_PKT_HDR(status, length) \ +#define SMC_PUT_PKT_HDR(lp, status, length) \ do { \ if (SMC_CAN_USE_32BIT) \ - SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \ + SMC_outl((status) | (length)<<16, ioaddr, \ + DATA_REG(lp)); \ else { \ - SMC_outw(status, ioaddr, DATA_REG); \ - SMC_outw(length, ioaddr, DATA_REG); \ + SMC_outw(status, ioaddr, DATA_REG(lp)); \ + SMC_outw(length, ioaddr, DATA_REG(lp)); \ } \ } while (0) -#define SMC_GET_PKT_HDR(status, length) \ +#define SMC_GET_PKT_HDR(lp, status, length) \ do { \ if (SMC_CAN_USE_32BIT) { \ - unsigned int __val = SMC_inl(ioaddr, DATA_REG); \ + unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \ (status) = __val & 0xffff; \ (length) = __val >> 16; \ } else { \ - (status) = SMC_inw(ioaddr, DATA_REG); \ - (length) = SMC_inw(ioaddr, DATA_REG); \ + (status) = SMC_inw(ioaddr, DATA_REG(lp)); \ + (length) = SMC_inw(ioaddr, DATA_REG(lp)); \ } \ } while (0) -#define SMC_PUSH_DATA(p, l) \ +#define SMC_PUSH_DATA(lp, p, l) \ do { \ if (SMC_CAN_USE_32BIT) { \ void *__ptr = (p); \ @@ -1295,23 +1296,25 @@ static const char * chip_ids[ 16 ] = { void __iomem *__ioaddr = ioaddr; \ if (__len >= 2 && (unsigned long)__ptr & 2) { \ __len -= 2; \ - SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \ + SMC_outw(*(u16 *)__ptr, ioaddr, \ + DATA_REG(lp)); \ __ptr += 2; \ } \ if (SMC_CAN_USE_DATACS && lp->datacs) \ __ioaddr = lp->datacs; \ - SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ if (__len & 2) { \ __ptr += (__len & ~3); \ - SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \ + SMC_outw(*((u16 *)__ptr), ioaddr, \ + DATA_REG(lp)); \ } \ } else if (SMC_CAN_USE_16BIT) \ - SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \ + SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ else if (SMC_CAN_USE_8BIT) \ - SMC_outsb(ioaddr, DATA_REG, p, l); \ + SMC_outsb(ioaddr, DATA_REG(lp), p, l); \ } while (0) -#define SMC_PULL_DATA(p, l) \ +#define SMC_PULL_DATA(lp, p, l) \ do { \ if (SMC_CAN_USE_32BIT) { \ void *__ptr = (p); \ @@ -1333,16 +1336,17 @@ static const char * chip_ids[ 16 ] = { */ \ __ptr -= 2; \ __len += 2; \ - SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ + SMC_SET_PTR(lp, \ + 2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ } \ if (SMC_CAN_USE_DATACS && lp->datacs) \ __ioaddr = lp->datacs; \ __len += 2; \ - SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ } else if (SMC_CAN_USE_16BIT) \ - SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \ + SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ else if (SMC_CAN_USE_8BIT) \ - SMC_insb(ioaddr, DATA_REG, p, l); \ + SMC_insb(ioaddr, DATA_REG(lp), p, l); \ } while (0) #endif /* _SMC91X_H_ */ -- cgit v1.1 From 3e94794355724f77dc6cbb5ad956f7c72d8313a4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 22 Feb 2008 19:55:15 +0900 Subject: smc91x: introduce platform data flags V2 This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm Acked-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 34 ++++++++++++++++++++++++++----- drivers/net/smc91x.h | 57 ++++++++++++++++++++++++++++++++-------------------- 2 files changed, 64 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index d0ef80a..97bdb2a 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1997,6 +1997,8 @@ err_out: static int smc_enable_device(struct platform_device *pdev) { + struct net_device *ndev = platform_get_drvdata(pdev); + struct smc_local *lp = netdev_priv(ndev); unsigned long flags; unsigned char ecor, ecsr; void __iomem *addr; @@ -2039,7 +2041,7 @@ static int smc_enable_device(struct platform_device *pdev) * Set the appropriate byte/word mode. */ ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8; - if (!SMC_CAN_USE_16BIT) + if (!SMC_16BIT(lp)) ecsr |= ECSR_IOIS8; writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT)); local_irq_restore(flags); @@ -2124,10 +2126,11 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * */ static int smc_drv_probe(struct platform_device *pdev) { + struct smc91x_platdata *pd = pdev->dev.platform_data; + struct smc_local *lp; struct net_device *ndev; struct resource *res, *ires; unsigned int __iomem *addr; - unsigned long irq_flags = SMC_IRQ_FLAGS; int ret; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); @@ -2152,6 +2155,27 @@ static int smc_drv_probe(struct platform_device *pdev) } SET_NETDEV_DEV(ndev, &pdev->dev); + /* get configuration from platform data, only allow use of + * bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set. + */ + + lp = netdev_priv(ndev); + lp->cfg.irq_flags = SMC_IRQ_FLAGS; + +#ifdef SMC_DYNAMIC_BUS_CONFIG + if (pd) + memcpy(&lp->cfg, pd, sizeof(lp->cfg)); + else { + lp->cfg.flags = SMC91X_USE_8BIT; + lp->cfg.flags |= SMC91X_USE_16BIT; + lp->cfg.flags |= SMC91X_USE_32BIT; + } + + lp->cfg.flags &= ~(SMC_CAN_USE_8BIT ? 0 : SMC91X_USE_8BIT); + lp->cfg.flags &= ~(SMC_CAN_USE_16BIT ? 0 : SMC91X_USE_16BIT); + lp->cfg.flags &= ~(SMC_CAN_USE_32BIT ? 0 : SMC91X_USE_32BIT); +#endif + ndev->dma = (unsigned char)-1; ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -2162,7 +2186,7 @@ static int smc_drv_probe(struct platform_device *pdev) ndev->irq = ires->start; if (SMC_IRQ_FLAGS == -1) - irq_flags = ires->flags & IRQF_TRIGGER_MASK; + lp->cfg.irq_flags = ires->flags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev); if (ret) @@ -2170,6 +2194,7 @@ static int smc_drv_probe(struct platform_device *pdev) #if defined(CONFIG_SA1100_ASSABET) NCR_0 |= NCR_ENET_OSC_EN; #endif + platform_set_drvdata(pdev, ndev); ret = smc_enable_device(pdev); if (ret) goto out_release_attrib; @@ -2188,8 +2213,7 @@ static int smc_drv_probe(struct platform_device *pdev) } #endif - platform_set_drvdata(pdev, ndev); - ret = smc_probe(ndev, addr, irq_flags); + ret = smc_probe(ndev, addr, lp->cfg.irq_flags); if (ret != 0) goto out_iounmap; diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 92ff9c4..e044b4d 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -34,6 +34,7 @@ #ifndef _SMC91X_H_ #define _SMC91X_H_ +#include /* * Define your architecture specific bus configuration parameters here. @@ -481,6 +482,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define RPC_LSA_DEFAULT RPC_LED_100_10 #define RPC_LSB_DEFAULT RPC_LED_TX_RX +#define SMC_DYNAMIC_BUS_CONFIG #endif @@ -526,8 +528,19 @@ struct smc_local { #endif void __iomem *base; void __iomem *datacs; + + struct smc91x_platdata cfg; }; +#ifdef SMC_DYNAMIC_BUS_CONFIG +#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT) +#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT) +#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT) +#else +#define SMC_8BIT(p) SMC_CAN_USE_8BIT +#define SMC_16BIT(p) SMC_CAN_USE_16BIT +#define SMC_32BIT(p) SMC_CAN_USE_32BIT +#endif #ifdef SMC_USE_PXA_DMA /* @@ -1108,41 +1121,41 @@ static const char * chip_ids[ 16 ] = { * * Enforce it on any 32-bit capable setup for now. */ -#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT +#define SMC_MUST_ALIGN_WRITE(lp) SMC_32BIT(lp) #define SMC_GET_PN(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, PN_REG(lp))) \ : (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF)) #define SMC_SET_PN(lp, x) \ do { \ - if (SMC_MUST_ALIGN_WRITE) \ + if (SMC_MUST_ALIGN_WRITE(lp)) \ SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2)); \ - else if (SMC_CAN_USE_8BIT) \ + else if (SMC_8BIT(lp)) \ SMC_outb(x, ioaddr, PN_REG(lp)); \ else \ SMC_outw(x, ioaddr, PN_REG(lp)); \ } while (0) #define SMC_GET_AR(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, AR_REG(lp))) \ : (SMC_inw(ioaddr, PN_REG(lp)) >> 8)) #define SMC_GET_TXFIFO(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \ : (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF)) #define SMC_GET_RXFIFO(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \ : (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8)) #define SMC_GET_INT(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, INT_REG(lp))) \ : (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF)) #define SMC_ACK_INT(lp, x) \ do { \ - if (SMC_CAN_USE_8BIT) \ + if (SMC_8BIT(lp)) \ SMC_outb(x, ioaddr, INT_REG(lp)); \ else { \ unsigned long __flags; \ @@ -1155,12 +1168,12 @@ static const char * chip_ids[ 16 ] = { } while (0) #define SMC_GET_INT_MASK(lp) \ - (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG(lp))) \ + (SMC_8BIT(lp) ? (SMC_inb(ioaddr, IM_REG(lp))) \ : (SMC_inw(ioaddr, INT_REG(lp)) >> 8)) #define SMC_SET_INT_MASK(lp, x) \ do { \ - if (SMC_CAN_USE_8BIT) \ + if (SMC_8BIT(lp)) \ SMC_outb(x, ioaddr, IM_REG(lp)); \ else \ SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \ @@ -1170,7 +1183,7 @@ static const char * chip_ids[ 16 ] = { #define SMC_SELECT_BANK(lp, x) \ do { \ - if (SMC_MUST_ALIGN_WRITE) \ + if (SMC_MUST_ALIGN_WRITE(lp)) \ SMC_outl((x)<<16, ioaddr, 12<> 16; \ @@ -1290,7 +1303,7 @@ static const char * chip_ids[ 16 ] = { #define SMC_PUSH_DATA(lp, p, l) \ do { \ - if (SMC_CAN_USE_32BIT) { \ + if (SMC_32BIT(lp)) { \ void *__ptr = (p); \ int __len = (l); \ void __iomem *__ioaddr = ioaddr; \ @@ -1308,15 +1321,15 @@ static const char * chip_ids[ 16 ] = { SMC_outw(*((u16 *)__ptr), ioaddr, \ DATA_REG(lp)); \ } \ - } else if (SMC_CAN_USE_16BIT) \ + } else if (SMC_16BIT(lp)) \ SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ - else if (SMC_CAN_USE_8BIT) \ + else if (SMC_8BIT(lp)) \ SMC_outsb(ioaddr, DATA_REG(lp), p, l); \ } while (0) #define SMC_PULL_DATA(lp, p, l) \ do { \ - if (SMC_CAN_USE_32BIT) { \ + if (SMC_32BIT(lp)) { \ void *__ptr = (p); \ int __len = (l); \ void __iomem *__ioaddr = ioaddr; \ @@ -1343,9 +1356,9 @@ static const char * chip_ids[ 16 ] = { __ioaddr = lp->datacs; \ __len += 2; \ SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ - } else if (SMC_CAN_USE_16BIT) \ + } else if (SMC_16BIT(lp)) \ SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ - else if (SMC_CAN_USE_8BIT) \ + else if (SMC_8BIT(lp)) \ SMC_insb(ioaddr, DATA_REG(lp), p, l); \ } while (0) -- cgit v1.1 From 8a214c125a06e974b6fba7c38fb06297ab449d3a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 22 Feb 2008 19:55:24 +0900 Subject: smc91x: add insw/outsw to default config V2 This patch makes sure SMC_insw()/SMC_outsw() are defined for the default configuration. Without this change BUG()s will be triggered when using 16-bit only platform data and the default configuration. Signed-off-by: Magnus Damm Acked-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index e044b4d..c4f2f46 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -476,6 +476,8 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -- cgit v1.1 From 56872167e7339c3afba2fbeb8aa2ce75b93fd991 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 22 Feb 2008 19:55:33 +0900 Subject: smc91x: make superh use default config V2 Removes superh board specific configuration from the header file. These boards will instead be configured using platform data. Signed-off-by: Magnus Damm Acked-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.h | 30 ------------------------------ 1 file changed, 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index c4f2f46..69e97a1 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -292,36 +292,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insw(a, r, p, l) insw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) -#elif defined(CONFIG_SUPERH) - -#ifdef CONFIG_SOLUTION_ENGINE -#define SMC_IRQ_FLAGS (0) -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) - -#else /* BOARDS */ - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 - -#define SMC_inb(a, r) inb((a) + (r)) -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_outb(v, a, r) outb(v, (a) + (r)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) - -#endif /* BOARDS */ - #elif defined(CONFIG_M32R) #define SMC_CAN_USE_8BIT 0 -- cgit v1.1 From 08dc732bf4aa844b2c3994f2ac0d53a7cfe6d656 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Thu, 28 Feb 2008 01:30:14 -0600 Subject: /drivers/net/8390.c replaced init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Jeff Garzik --- drivers/net/8390.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/8390.c b/drivers/net/8390.c index a828076..0ed41a3 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -48,14 +48,16 @@ EXPORT_SYMBOL(__alloc_ei_netdev); #if defined(MODULE) -int init_module(void) +static int __init ns8390_module_init(void) { return 0; } -void cleanup_module(void) +static void __exit ns8390_module_exit(void) { } +module_init(ns8390_init_module); +module_exit(ns8390_module_exit); #endif /* MODULE */ MODULE_LICENSE("GPL"); -- cgit v1.1 From b32dac08e4170e54c7edd25212ff48f921bda6e8 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Thu, 28 Feb 2008 01:30:50 -0600 Subject: /drivers/net/appletalk/cops.c replaced init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Jeff Garzik --- drivers/net/appletalk/cops.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 92c3a4c..65b901e 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -1010,7 +1010,7 @@ module_param(io, int, 0); module_param(irq, int, 0); module_param(board_type, int, 0); -int __init init_module(void) +static int __init cops_module_init(void) { if (io == 0) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", @@ -1021,12 +1021,14 @@ int __init init_module(void) return 0; } -void __exit cleanup_module(void) +static void __exit cops_module_exit(void) { unregister_netdev(cops_dev); cleanup_card(cops_dev); free_netdev(cops_dev); } +module_init(cops_module_init); +module_exit(cops_module_exit); #endif /* MODULE */ /* -- cgit v1.1 From 0ebd1c1d7dec3aae2c336fb1fd930961735ff249 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Thu, 28 Feb 2008 01:31:08 -0600 Subject: /drivers/net/arcnet/com20020.c replaced init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Jeff Garzik --- drivers/net/arcnet/com20020.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 7cf0a25..8b51313 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -348,14 +348,15 @@ MODULE_LICENSE("GPL"); #ifdef MODULE -int init_module(void) +static int __init com20020_module_init(void) { BUGLVL(D_NORMAL) printk(VERSION); return 0; } -void cleanup_module(void) +static void __exit com20020_module_exit(void) { } - +module_init(com20020_module_init); +module_exit(com20020_module_exit); #endif /* MODULE */ -- cgit v1.1 From 5250f33229c1e41b1fac27bb564697046e525b93 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Thu, 28 Feb 2008 01:31:12 -0600 Subject: /drivers/net/at1700.c replaced init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Jeff Garzik --- drivers/net/at1700.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index 24d81f9..7e874d4 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -881,7 +881,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); -int __init init_module(void) +static int __init at1700_module_init(void) { if (io == 0) printk("at1700: You should not use auto-probing with insmod!\n"); @@ -891,13 +891,14 @@ int __init init_module(void) return 0; } -void __exit -cleanup_module(void) +static void __exit at1700_module_exit(void) { unregister_netdev(dev_at1700); cleanup_card(dev_at1700); free_netdev(dev_at1700); } +module_init(at1700_module_init); +module_exit(at1700_module_exit); #endif /* MODULE */ MODULE_LICENSE("GPL"); -- cgit v1.1 From 53e7c46b0680ccc3ac67a2b8cd7f050569836e44 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Thu, 28 Feb 2008 01:31:18 -0600 Subject: /drivers/net/atarilance.c replaced init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Jeff Garzik --- drivers/net/atarilance.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index 13c293b..4cceaac 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -1155,7 +1155,7 @@ static int lance_set_mac_address( struct net_device *dev, void *addr ) #ifdef MODULE static struct net_device *atarilance_dev; -int __init init_module(void) +static int __init atarilance_module_init(void) { atarilance_dev = atarilance_probe(-1); if (IS_ERR(atarilance_dev)) @@ -1163,13 +1163,14 @@ int __init init_module(void) return 0; } -void __exit cleanup_module(void) +static void __exit atarilance_module_exit(void) { unregister_netdev(atarilance_dev); free_irq(atarilance_dev->irq, atarilance_dev); free_netdev(atarilance_dev); } - +module_init(atarilance_module_init); +module_exit(atarilance_module_exit); #endif /* MODULE */ -- cgit v1.1 From 021230d40ae0e6508d6c717b6e0d6d81cd77ac25 Mon Sep 17 00:00:00 2001 From: Ayyappan Veeraiyan Date: Mon, 3 Mar 2008 15:03:45 -0800 Subject: ixgbe: Introduce MSI-X queue vector code This code abstracts the per-queue MSI-X interrupt vector into a queue vector layer. This abstraction is needed since there can be many more queues than available MSI-X vectors in a machine. The MSI-X irq vectors are remapped to a shared queue vector which can point to several (both RX and TX) hardware queues. The NAPI algorithm then cleans the appropriate ring/queues on interrupt or poll. The remapping is a delicate and complex calculation to make sure that we're not unbalancing the irq load, and spreads the irqs as much as possible, and may combine RX and TX flows onto the same queue vector. This effectively enables receive flow hashing across vectors and helps irq load balance across CPUs. Signed-off-by: Ayyappan Veeraiyan Signed-off-by: Auke Kok Acked-by: Jesse Brandeburg Acked-by: Waskiewicz Jr, Peter P Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe.h | 69 ++- drivers/net/ixgbe/ixgbe_main.c | 1107 ++++++++++++++++++++++++++++------------ 2 files changed, 826 insertions(+), 350 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index d0bf206..2077477 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -120,7 +120,6 @@ struct ixgbe_queue_stats { }; struct ixgbe_ring { - struct ixgbe_adapter *adapter; /* backlink */ void *desc; /* descriptor ring memory */ dma_addr_t dma; /* phys. address of descriptor ring */ unsigned int size; /* length in bytes */ @@ -128,6 +127,7 @@ struct ixgbe_ring { unsigned int next_to_use; unsigned int next_to_clean; + int queue_index; /* needed for multiqueue queue management */ union { struct ixgbe_tx_buffer *tx_buffer_info; struct ixgbe_rx_buffer *rx_buffer_info; @@ -137,7 +137,13 @@ struct ixgbe_ring { u16 tail; + u16 reg_idx; /* holds the special value that gets the hardware register + * offset associated with this ring, which is different + * for DCE and RSS modes */ struct ixgbe_queue_stats stats; + u8 v_idx; /* maps directly to the index for this ring in the hardware + * vector array, can also be used for finding the bit in EICR + * and friends that represents the vector for this ring */ u32 eims_value; u16 itr_register; @@ -146,6 +152,31 @@ struct ixgbe_ring { u16 work_limit; /* max work per interrupt */ }; +#define RING_F_VMDQ 1 +#define RING_F_RSS 2 +#define IXGBE_MAX_RSS_INDICES 16 +#define IXGBE_MAX_VMDQ_INDICES 16 +struct ixgbe_ring_feature { + int indices; + int mask; +}; + +#define MAX_RX_QUEUES 64 +#define MAX_TX_QUEUES 32 + +/* MAX_MSIX_Q_VECTORS of these are allocated, + * but we only use one per queue-specific vector. + */ +struct ixgbe_q_vector { + struct ixgbe_adapter *adapter; + struct napi_struct napi; + DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */ + DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */ + u8 rxr_count; /* Rx ring count assigned to this vector */ + u8 txr_count; /* Tx ring count assigned to this vector */ + u32 eitr; +}; + /* Helper macros to switch between ints/sec and what the register uses. * And yes, it's the same math going both ways. */ @@ -166,6 +197,14 @@ struct ixgbe_ring { #define IXGBE_MAX_JUMBO_FRAME_SIZE 16128 +#define OTHER_VECTOR 1 +#define NON_Q_VECTORS (OTHER_VECTOR) + +#define MAX_MSIX_Q_VECTORS 16 +#define MIN_MSIX_Q_VECTORS 2 +#define MAX_MSIX_COUNT (MAX_MSIX_Q_VECTORS + NON_Q_VECTORS) +#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS) + /* board specific private data structure */ struct ixgbe_adapter { struct timer_list watchdog_timer; @@ -173,10 +212,11 @@ struct ixgbe_adapter { u16 bd_number; u16 rx_buf_len; struct work_struct reset_task; + struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS]; + char name[MAX_MSIX_COUNT][IFNAMSIZ + 5]; /* TX */ struct ixgbe_ring *tx_ring; /* One per active queue */ - struct napi_struct napi; u64 restart_queue; u64 lsc_int; u64 hw_tso_ctxt; @@ -192,22 +232,26 @@ struct ixgbe_adapter { u64 non_eop_descs; int num_tx_queues; int num_rx_queues; + int num_msix_vectors; + struct ixgbe_ring_feature ring_feature[3]; struct msix_entry *msix_entries; u64 rx_hdr_split; u32 alloc_rx_page_failed; u32 alloc_rx_buff_failed; + /* Some features need tri-state capability, + * thus the additional *_CAPABLE flags. + */ u32 flags; -#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1) +#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1 << 0) #define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1) -#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2) -#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3) -#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4) - - /* Interrupt Throttle Rate */ - u32 rx_eitr; - u32 tx_eitr; +#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2) +#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3) +#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4) +#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5) +#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 6) +#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 7) /* OS defined structs */ struct net_device *netdev; @@ -218,7 +262,10 @@ struct ixgbe_adapter { struct ixgbe_hw hw; u16 msg_enable; struct ixgbe_hw_stats stats; - char lsc_name[IFNAMSIZ + 5]; + + /* Interrupt Throttle Rate */ + u32 rx_eitr; + u32 tx_eitr; unsigned long state; u64 tx_busy; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index c2095ce..fecc8ea 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -559,7 +559,7 @@ next_desc: return cleaned; } -#define IXGBE_MAX_INTR 10 +static int ixgbe_clean_rxonly(struct napi_struct *, int); /** * ixgbe_configure_msix - Configure MSI-X hardware * @adapter: board private structure @@ -569,28 +569,57 @@ next_desc: **/ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) { - int i, vector = 0; + struct ixgbe_q_vector *q_vector; + int i, j, q_vectors, v_idx, r_idx; + u32 mask; - for (i = 0; i < adapter->num_tx_queues; i++) { - ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), - IXGBE_MSIX_VECTOR(vector)); - writel(EITR_INTS_PER_SEC_TO_REG(adapter->tx_eitr), - adapter->hw.hw_addr + adapter->tx_ring[i].itr_register); - vector++; - } + q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; - for (i = 0; i < adapter->num_rx_queues; i++) { - ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(i), - IXGBE_MSIX_VECTOR(vector)); - writel(EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr), - adapter->hw.hw_addr + adapter->rx_ring[i].itr_register); - vector++; + /* Populate the IVAR table and set the ITR values to the + * corresponding register. + */ + for (v_idx = 0; v_idx < q_vectors; v_idx++) { + q_vector = &adapter->q_vector[v_idx]; + /* XXX for_each_bit(...) */ + r_idx = find_first_bit(q_vector->rxr_idx, + adapter->num_rx_queues); + + for (i = 0; i < q_vector->rxr_count; i++) { + j = adapter->rx_ring[r_idx].reg_idx; + ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(j), v_idx); + r_idx = find_next_bit(q_vector->rxr_idx, + adapter->num_rx_queues, + r_idx + 1); + } + r_idx = find_first_bit(q_vector->txr_idx, + adapter->num_tx_queues); + + for (i = 0; i < q_vector->txr_count; i++) { + j = adapter->tx_ring[r_idx].reg_idx; + ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(j), v_idx); + r_idx = find_next_bit(q_vector->txr_idx, + adapter->num_tx_queues, + r_idx + 1); + } + + /* if this is a tx only vector use half the irq (tx) rate */ + if (q_vector->txr_count && !q_vector->rxr_count) + q_vector->eitr = adapter->tx_eitr; + else + /* rx only or mixed */ + q_vector->eitr = adapter->rx_eitr; + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), + EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); } - vector = adapter->num_tx_queues + adapter->num_rx_queues; - ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, - IXGBE_MSIX_VECTOR(vector)); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(vector), 1950); + ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, v_idx); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); + + /* set up to autoclear timer, lsc, and the vectors */ + mask = IXGBE_EIMS_ENABLE_MASK; + mask &= ~IXGBE_EIMS_OTHER; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); } static irqreturn_t ixgbe_msix_lsc(int irq, void *data) @@ -614,153 +643,241 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) { - struct ixgbe_ring *txr = data; - struct ixgbe_adapter *adapter = txr->adapter; + struct ixgbe_q_vector *q_vector = data; + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_ring *txr; + int i, r_idx; + + if (!q_vector->txr_count) + return IRQ_HANDLED; + + r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); + for (i = 0; i < q_vector->txr_count; i++) { + txr = &(adapter->tx_ring[r_idx]); + ixgbe_clean_tx_irq(adapter, txr); + r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, + r_idx + 1); + } - ixgbe_clean_tx_irq(adapter, txr); return IRQ_HANDLED; } +/** + * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues) + * @irq: unused + * @data: pointer to our q_vector struct for this interrupt vector + **/ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) { - struct ixgbe_ring *rxr = data; - struct ixgbe_adapter *adapter = rxr->adapter; + struct ixgbe_q_vector *q_vector = data; + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_ring *rxr; + int r_idx; + + r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); + if (!q_vector->rxr_count) + return IRQ_HANDLED; + + rxr = &(adapter->rx_ring[r_idx]); + /* disable interrupts on this vector only */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->v_idx); + netif_rx_schedule(adapter->netdev, &q_vector->napi); + + return IRQ_HANDLED; +} + +static irqreturn_t ixgbe_msix_clean_many(int irq, void *data) +{ + ixgbe_msix_clean_rx(irq, data); + ixgbe_msix_clean_tx(irq, data); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->eims_value); - netif_rx_schedule(adapter->netdev, &adapter->napi); return IRQ_HANDLED; } +/** + * ixgbe_clean_rxonly - msix (aka one shot) rx clean routine + * @napi: napi struct with our devices info in it + * @budget: amount of work driver is allowed to do this pass, in packets + * + **/ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) { - struct ixgbe_adapter *adapter = container_of(napi, - struct ixgbe_adapter, napi); - struct net_device *netdev = adapter->netdev; + struct ixgbe_q_vector *q_vector = + container_of(napi, struct ixgbe_q_vector, napi); + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_ring *rxr; int work_done = 0; - struct ixgbe_ring *rxr = adapter->rx_ring; + long r_idx; - /* Keep link state information with original netdev */ - if (!netif_carrier_ok(netdev)) - goto quit_polling; + r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); + rxr = &(adapter->rx_ring[r_idx]); ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget); - /* If no Tx and not enough Rx work done, exit the polling mode */ - if ((work_done < budget) || !netif_running(netdev)) { -quit_polling: - netif_rx_complete(netdev, napi); + /* If all Rx work done, exit the polling mode */ + if (work_done < budget) { + netif_rx_complete(adapter->netdev, napi); if (!test_bit(__IXGBE_DOWN, &adapter->state)) - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, - rxr->eims_value); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rxr->v_idx); } return work_done; } +static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx, + int r_idx) +{ + a->q_vector[v_idx].adapter = a; + set_bit(r_idx, a->q_vector[v_idx].rxr_idx); + a->q_vector[v_idx].rxr_count++; + a->rx_ring[r_idx].v_idx = 1 << v_idx; +} + +static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx, + int r_idx) +{ + a->q_vector[v_idx].adapter = a; + set_bit(r_idx, a->q_vector[v_idx].txr_idx); + a->q_vector[v_idx].txr_count++; + a->tx_ring[r_idx].v_idx = 1 << v_idx; +} + /** - * ixgbe_setup_msix - Initialize MSI-X interrupts + * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors + * @adapter: board private structure to initialize + * @vectors: allotted vector count for descriptor rings * - * ixgbe_setup_msix allocates MSI-X vectors and requests - * interrutps from the kernel. + * This function maps descriptor rings to the queue-specific vectors + * we were allotted through the MSI-X enabling code. Ideally, we'd have + * one vector per ring/queue, but on a constrained vector budget, we + * group the rings as "efficiently" as possible. You would add new + * mapping configurations in here. **/ -static int ixgbe_setup_msix(struct ixgbe_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int i, int_vector = 0, err = 0; - int max_msix_count; +static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter, + int vectors) +{ + int v_start = 0; + int rxr_idx = 0, txr_idx = 0; + int rxr_remaining = adapter->num_rx_queues; + int txr_remaining = adapter->num_tx_queues; + int i, j; + int rqpv, tqpv; + int err = 0; + + /* No mapping required if MSI-X is disabled. */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + goto out; - /* +1 for the LSC interrupt */ - max_msix_count = adapter->num_rx_queues + adapter->num_tx_queues + 1; - adapter->msix_entries = kcalloc(max_msix_count, - sizeof(struct msix_entry), GFP_KERNEL); - if (!adapter->msix_entries) - return -ENOMEM; + /* + * The ideal configuration... + * We have enough vectors to map one per queue. + */ + if (vectors == adapter->num_rx_queues + adapter->num_tx_queues) { + for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++) + map_vector_to_rxq(adapter, v_start, rxr_idx); - for (i = 0; i < max_msix_count; i++) - adapter->msix_entries[i].entry = i; + for (; txr_idx < txr_remaining; v_start++, txr_idx++) + map_vector_to_txq(adapter, v_start, txr_idx); - err = pci_enable_msix(adapter->pdev, adapter->msix_entries, - max_msix_count); - if (err) goto out; + } - for (i = 0; i < adapter->num_tx_queues; i++) { - sprintf(adapter->tx_ring[i].name, "%s-tx%d", netdev->name, i); - err = request_irq(adapter->msix_entries[int_vector].vector, - &ixgbe_msix_clean_tx, - 0, - adapter->tx_ring[i].name, - &(adapter->tx_ring[i])); - if (err) { - DPRINTK(PROBE, ERR, - "request_irq failed for MSIX interrupt " - "Error: %d\n", err); - goto release_irqs; + /* + * If we don't have enough vectors for a 1-to-1 + * mapping, we'll have to group them so there are + * multiple queues per vector. + */ + /* Re-adjusting *qpv takes care of the remainder. */ + for (i = v_start; i < vectors; i++) { + rqpv = DIV_ROUND_UP(rxr_remaining, vectors - i); + for (j = 0; j < rqpv; j++) { + map_vector_to_rxq(adapter, i, rxr_idx); + rxr_idx++; + rxr_remaining--; + } + } + for (i = v_start; i < vectors; i++) { + tqpv = DIV_ROUND_UP(txr_remaining, vectors - i); + for (j = 0; j < tqpv; j++) { + map_vector_to_txq(adapter, i, txr_idx); + txr_idx++; + txr_remaining--; } - adapter->tx_ring[i].eims_value = - (1 << IXGBE_MSIX_VECTOR(int_vector)); - adapter->tx_ring[i].itr_register = IXGBE_EITR(int_vector); - int_vector++; } - for (i = 0; i < adapter->num_rx_queues; i++) { - if (strlen(netdev->name) < (IFNAMSIZ - 5)) - sprintf(adapter->rx_ring[i].name, - "%s-rx%d", netdev->name, i); - else - memcpy(adapter->rx_ring[i].name, - netdev->name, IFNAMSIZ); - err = request_irq(adapter->msix_entries[int_vector].vector, - &ixgbe_msix_clean_rx, 0, - adapter->rx_ring[i].name, - &(adapter->rx_ring[i])); +out: + return err; +} + +/** + * ixgbe_request_msix_irqs - Initialize MSI-X interrupts + * @adapter: board private structure + * + * ixgbe_request_msix_irqs allocates MSI-X vectors and requests + * interrupts from the kernel. + **/ +static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + irqreturn_t (*handler)(int, void *); + int i, vector, q_vectors, err; + + /* Decrement for Other and TCP Timer vectors */ + q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* Map the Tx/Rx rings to the vectors we were allotted. */ + err = ixgbe_map_rings_to_vectors(adapter, q_vectors); + if (err) + goto out; + +#define SET_HANDLER(_v) ((!(_v)->rxr_count) ? &ixgbe_msix_clean_tx : \ + (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \ + &ixgbe_msix_clean_many) + for (vector = 0; vector < q_vectors; vector++) { + handler = SET_HANDLER(&adapter->q_vector[vector]); + sprintf(adapter->name[vector], "%s:v%d-%s", + netdev->name, vector, + (handler == &ixgbe_msix_clean_rx) ? "Rx" : + ((handler == &ixgbe_msix_clean_tx) ? "Tx" : "TxRx")); + err = request_irq(adapter->msix_entries[vector].vector, + handler, 0, adapter->name[vector], + &(adapter->q_vector[vector])); if (err) { DPRINTK(PROBE, ERR, "request_irq failed for MSIX interrupt " "Error: %d\n", err); - goto release_irqs; + goto free_queue_irqs; } - - adapter->rx_ring[i].eims_value = - (1 << IXGBE_MSIX_VECTOR(int_vector)); - adapter->rx_ring[i].itr_register = IXGBE_EITR(int_vector); - int_vector++; } - sprintf(adapter->lsc_name, "%s-lsc", netdev->name); - err = request_irq(adapter->msix_entries[int_vector].vector, - &ixgbe_msix_lsc, 0, adapter->lsc_name, netdev); + sprintf(adapter->name[vector], "%s:lsc", netdev->name); + err = request_irq(adapter->msix_entries[vector].vector, + &ixgbe_msix_lsc, 0, adapter->name[vector], netdev); if (err) { DPRINTK(PROBE, ERR, "request_irq for msix_lsc failed: %d\n", err); - goto release_irqs; + goto free_queue_irqs; } - /* FIXME: implement netif_napi_remove() instead */ - adapter->napi.poll = ixgbe_clean_rxonly; - adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; return 0; -release_irqs: - int_vector--; - for (; int_vector >= adapter->num_tx_queues; int_vector--) - free_irq(adapter->msix_entries[int_vector].vector, - &(adapter->rx_ring[int_vector - - adapter->num_tx_queues])); - - for (; int_vector >= 0; int_vector--) - free_irq(adapter->msix_entries[int_vector].vector, - &(adapter->tx_ring[int_vector])); -out: +free_queue_irqs: + for (i = vector - 1; i >= 0; i--) + free_irq(adapter->msix_entries[--vector].vector, + &(adapter->q_vector[i])); + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + pci_disable_msix(adapter->pdev); kfree(adapter->msix_entries); adapter->msix_entries = NULL; - adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; +out: return err; } +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); + /** - * ixgbe_intr - Interrupt Handler + * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure * @pt_regs: CPU registers structure @@ -772,8 +889,10 @@ static irqreturn_t ixgbe_intr(int irq, void *data) struct ixgbe_hw *hw = &adapter->hw; u32 eicr; - eicr = IXGBE_READ_REG(hw, IXGBE_EICR); + /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read + * therefore no explict interrupt disable is necessary */ + eicr = IXGBE_READ_REG(hw, IXGBE_EICR); if (!eicr) return IRQ_NONE; /* Not our interrupt */ @@ -782,16 +901,29 @@ static irqreturn_t ixgbe_intr(int irq, void *data) if (!test_bit(__IXGBE_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies); } - if (netif_rx_schedule_prep(netdev, &adapter->napi)) { - /* Disable interrupts and register for poll. The flush of the - * posted write is intentionally left out. */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); - __netif_rx_schedule(netdev, &adapter->napi); + + + if (netif_rx_schedule_prep(netdev, &adapter->q_vector[0].napi)) { + /* would disable interrupts here but EIAM disabled it */ + __netif_rx_schedule(netdev, &adapter->q_vector[0].napi); } return IRQ_HANDLED; } +static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter) +{ + int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + for (i = 0; i < q_vectors; i++) { + struct ixgbe_q_vector *q_vector = &adapter->q_vector[i]; + bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES); + bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES); + q_vector->rxr_count = 0; + q_vector->txr_count = 0; + } +} + /** * ixgbe_request_irq - initialize interrupts * @adapter: board private structure @@ -799,40 +931,24 @@ static irqreturn_t ixgbe_intr(int irq, void *data) * Attempts to configure interrupts using the best available * capabilities of the hardware and kernel. **/ -static int ixgbe_request_irq(struct ixgbe_adapter *adapter, u32 *num_rx_queues) +static int ixgbe_request_irq(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int flags, err; - irq_handler_t handler = ixgbe_intr; - - flags = IRQF_SHARED; - - err = ixgbe_setup_msix(adapter); - if (!err) - goto request_done; - - /* - * if we can't do MSI-X, fall through and try MSI - * No need to reallocate memory since we're decreasing the number of - * queues. We just won't use the other ones, also it is freed correctly - * on ixgbe_remove. - */ - *num_rx_queues = 1; + int err; - /* do MSI */ - err = pci_enable_msi(adapter->pdev); - if (!err) { - adapter->flags |= IXGBE_FLAG_MSI_ENABLED; - flags &= ~IRQF_SHARED; - handler = &ixgbe_intr; + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + err = ixgbe_request_msix_irqs(adapter); + } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + err = request_irq(adapter->pdev->irq, &ixgbe_intr, 0, + netdev->name, netdev); + } else { + err = request_irq(adapter->pdev->irq, &ixgbe_intr, IRQF_SHARED, + netdev->name, netdev); } - err = request_irq(adapter->pdev->irq, handler, flags, - netdev->name, netdev); if (err) DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err); -request_done: return err; } @@ -841,28 +957,22 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter) struct net_device *netdev = adapter->netdev; if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { - int i; + int i, q_vectors; - for (i = 0; i < adapter->num_tx_queues; i++) - free_irq(adapter->msix_entries[i].vector, - &(adapter->tx_ring[i])); - for (i = 0; i < adapter->num_rx_queues; i++) - free_irq(adapter->msix_entries[i + - adapter->num_tx_queues].vector, - &(adapter->rx_ring[i])); - i = adapter->num_rx_queues + adapter->num_tx_queues; + q_vectors = adapter->num_msix_vectors; + + i = q_vectors - 1; free_irq(adapter->msix_entries[i].vector, netdev); - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; - adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; - return; - } - free_irq(adapter->pdev->irq, netdev); - if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { - pci_disable_msi(adapter->pdev); - adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; + i--; + for (; i >= 0; i--) { + free_irq(adapter->msix_entries[i].vector, + &(adapter->q_vector[i])); + } + + ixgbe_reset_q_vectors(adapter); + } else { + free_irq(adapter->pdev->irq, netdev); } } @@ -874,7 +984,13 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) { IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); IXGBE_WRITE_FLUSH(&adapter->hw); - synchronize_irq(adapter->pdev->irq); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } } /** @@ -883,12 +999,9 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) **/ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) { - if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, - (IXGBE_EIMS_ENABLE_MASK & - ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC))); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, - IXGBE_EIMS_ENABLE_MASK); + u32 mask; + mask = IXGBE_EIMS_ENABLE_MASK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); IXGBE_WRITE_FLUSH(&adapter->hw); } @@ -898,20 +1011,18 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) **/ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) { - int i; struct ixgbe_hw *hw = &adapter->hw; - if (adapter->rx_eitr) - IXGBE_WRITE_REG(hw, IXGBE_EITR(0), - EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr)); - - /* for re-triggering the interrupt in non-NAPI mode */ - adapter->rx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0)); - adapter->tx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0)); + IXGBE_WRITE_REG(hw, IXGBE_EITR(0), + EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr)); ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(0), 0); - for (i = 0; i < adapter->num_tx_queues; i++) - ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), i); + ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(0), 0); + + map_vector_to_rxq(adapter, 0, 0); + map_vector_to_txq(adapter, 0, 0); + + DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n"); } /** @@ -924,23 +1035,29 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) { u64 tdba; struct ixgbe_hw *hw = &adapter->hw; - u32 i, tdlen; + u32 i, j, tdlen, txctrl; /* Setup the HW Tx Head and Tail descriptor pointers */ for (i = 0; i < adapter->num_tx_queues; i++) { + j = adapter->tx_ring[i].reg_idx; tdba = adapter->tx_ring[i].dma; tdlen = adapter->tx_ring[i].count * - sizeof(union ixgbe_adv_tx_desc); - IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i), (tdba & DMA_32BIT_MASK)); - IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32)); - IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i), tdlen); - IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0); - adapter->tx_ring[i].head = IXGBE_TDH(i); - adapter->tx_ring[i].tail = IXGBE_TDT(i); + sizeof(union ixgbe_adv_tx_desc); + IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j), + (tdba & DMA_32BIT_MASK)); + IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen); + IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0); + IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); + adapter->tx_ring[i].head = IXGBE_TDH(j); + adapter->tx_ring[i].tail = IXGBE_TDT(j); + /* Disable Tx Head Writeback RO bit, since this hoses + * bookkeeping if things aren't delivered in order. + */ + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), txctrl); } - - IXGBE_WRITE_REG(hw, IXGBE_TIPG, IXGBE_TIPG_FIBER_DEFAULT); } #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ @@ -959,13 +1076,12 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + int i, j; u32 rdlen, rxctrl, rxcsum; u32 random[10]; - u32 reta, mrqc; - int i; u32 fctrl, hlreg0; - u32 srrctl; u32 pages; + u32 reta = 0, mrqc, srrctl; /* Decide whether to use packet split mode or not */ if (netdev->mtu > ETH_DATA_LEN) @@ -985,6 +1101,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); fctrl |= IXGBE_FCTRL_BAM; + fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl); hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); @@ -1036,37 +1153,23 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) adapter->rx_ring[i].tail = IXGBE_RDT(i); } - if (adapter->num_rx_queues > 1) { - /* Random 40bytes used as random key in RSS hash function */ - get_random_bytes(&random[0], 40); - - switch (adapter->num_rx_queues) { - case 8: - case 4: - /* Bits [3:0] in each byte refers the Rx queue no */ - reta = 0x00010203; - break; - case 2: - reta = 0x00010001; - break; - default: - reta = 0x00000000; - break; - } - + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { /* Fill out redirection table */ - for (i = 0; i < 32; i++) { - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i, reta); - if (adapter->num_rx_queues > 4) { - i++; - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i, - 0x04050607); - } + for (i = 0, j = 0; i < 128; i++, j++) { + if (j == adapter->ring_feature[RING_F_RSS].indices) + j = 0; + /* reta = 4-byte sliding window of + * 0x00..(indices-1)(indices-1)00..etc. */ + reta = (reta << 8) | (j * 0x11); + if ((i & 3) == 3) + IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); } /* Fill out hash function seeds */ + /* XXX use a random constant here to glue certain flows */ + get_random_bytes(&random[0], 40); for (i = 0; i < 10; i++) - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RSSRK(0), i, random[i]); + IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]); mrqc = IXGBE_MRQC_RSSEN /* Perform hash on these packet types */ @@ -1080,26 +1183,23 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) | IXGBE_MRQC_RSS_FIELD_IPV6_UDP | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); + } - /* Multiqueue and packet checksumming are mutually exclusive. */ - rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED || + adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) { + /* Disable indicating checksum in descriptor, enables + * RSS hash */ rxcsum |= IXGBE_RXCSUM_PCSD; - IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); - } else { - /* Enable Receive Checksum Offload for TCP and UDP */ - rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); - if (adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) { - /* Enable IPv4 payload checksum for UDP fragments - * Must be used in conjunction with packet-split. */ - rxcsum |= IXGBE_RXCSUM_IPPCSE; - } else { - /* don't need to clear IPPCSE as it defaults to 0 */ - } - IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } - /* Enable Receives */ - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); - rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + if (!(rxcsum & IXGBE_RXCSUM_PCSD)) { + /* Enable IPv4 payload checksum for UDP fragments + * if PCSD is not set */ + rxcsum |= IXGBE_RXCSUM_IPPCSE; + } + + IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } static void ixgbe_vlan_rx_register(struct net_device *netdev, @@ -1219,6 +1319,43 @@ static void ixgbe_set_multi(struct net_device *netdev) } +static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) +{ + int q_idx; + struct ixgbe_q_vector *q_vector; + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* legacy and MSI only use one vector */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + for (q_idx = 0; q_idx < q_vectors; q_idx++) { + q_vector = &adapter->q_vector[q_idx]; + if (!q_vector->rxr_count) + continue; + napi_enable(&q_vector->napi); + } +} + +static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) +{ + int q_idx; + struct ixgbe_q_vector *q_vector; + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* legacy and MSI only use one vector */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + for (q_idx = 0; q_idx < q_vectors; q_idx++) { + q_vector = &adapter->q_vector[q_idx]; + if (!q_vector->rxr_count) + continue; + napi_disable(&q_vector->napi); + } +} + + static void ixgbe_configure(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -1238,30 +1375,35 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) static int ixgbe_up_complete(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int i; - u32 gpie = 0; struct ixgbe_hw *hw = &adapter->hw; - u32 txdctl, rxdctl, mhadd; + int i, j = 0; int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + u32 txdctl, rxdctl, mhadd; + u32 gpie; ixgbe_get_hw_control(adapter); - if (adapter->flags & (IXGBE_FLAG_MSIX_ENABLED | - IXGBE_FLAG_MSI_ENABLED)) { + if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) || + (adapter->flags & IXGBE_FLAG_MSI_ENABLED)) { if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { gpie = (IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME | IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD); } else { /* MSI only */ - gpie = (IXGBE_GPIE_EIAME | - IXGBE_GPIE_PBA_SUPPORT); + gpie = 0; } - IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie); - gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE); + /* XXX: to interrupt immediately for EICS writes, enable this */ + /* gpie |= IXGBE_GPIE_EIMEN; */ + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); } - mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + /* legacy interrupts, use EIAM to auto-mask when reading EICR, + * specifically only auto mask tx and rx interrupts */ + IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); + } + mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { mhadd &= ~IXGBE_MHADD_MFS_MASK; mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; @@ -1270,15 +1412,21 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) } for (i = 0; i < adapter->num_tx_queues; i++) { - txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i)); + j = adapter->tx_ring[i].reg_idx; + txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j)); txdctl |= IXGBE_TXDCTL_ENABLE; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl); + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl); } for (i = 0; i < adapter->num_rx_queues; i++) { - rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i)); + j = adapter->rx_ring[i].reg_idx; + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); + /* enable PTHRESH=32 descriptors (half the internal cache) + * and HTHRESH=0 descriptors (to minimize latency on fetch), + * this also removes a pesky rx_no_buffer_count increment */ + rxdctl |= 0x0020; rxdctl |= IXGBE_RXDCTL_ENABLE; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl); + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), rxdctl); } /* enable all receives */ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); @@ -1291,7 +1439,11 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_configure_msi_and_legacy(adapter); clear_bit(__IXGBE_DOWN, &adapter->state); - napi_enable(&adapter->napi); + ixgbe_napi_enable_all(adapter); + + /* clear any pending interrupts, may auto mask */ + IXGBE_READ_REG(hw, IXGBE_EICR); + ixgbe_irq_enable(adapter); /* bring the link up in the watchdog, this could race with our first @@ -1333,7 +1485,7 @@ static int ixgbe_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); - u32 err, num_rx_queues = adapter->num_rx_queues; + u32 err; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); @@ -1349,7 +1501,7 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); if (netif_running(netdev)) { - err = ixgbe_request_irq(adapter, &num_rx_queues); + err = ixgbe_request_irq(adapter); if (err) return err; } @@ -1449,27 +1601,27 @@ static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter, } /** - * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues + * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues * @adapter: board private structure **/ -static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) +static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) { int i; - for (i = 0; i < adapter->num_tx_queues; i++) - ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]); + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]); } /** - * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues + * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues * @adapter: board private structure **/ -static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) +static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) { int i; - for (i = 0; i < adapter->num_rx_queues; i++) - ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]); + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]); } void ixgbe_down(struct ixgbe_adapter *adapter) @@ -1493,10 +1645,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter) IXGBE_WRITE_FLUSH(&adapter->hw); msleep(10); - napi_disable(&adapter->napi); - ixgbe_irq_disable(adapter); + ixgbe_napi_disable_all(adapter); del_timer_sync(&adapter->watchdog_timer); netif_carrier_off(netdev); @@ -1547,27 +1698,28 @@ static void ixgbe_shutdown(struct pci_dev *pdev) } /** - * ixgbe_clean - NAPI Rx polling callback - * @adapter: board private structure + * ixgbe_poll - NAPI Rx polling callback + * @napi: structure for representing this polling device + * @budget: how many packets driver is allowed to clean + * + * This function is used for legacy and MSI, NAPI mode **/ -static int ixgbe_clean(struct napi_struct *napi, int budget) +static int ixgbe_poll(struct napi_struct *napi, int budget) { - struct ixgbe_adapter *adapter = container_of(napi, - struct ixgbe_adapter, napi); - struct net_device *netdev = adapter->netdev; + struct ixgbe_q_vector *q_vector = container_of(napi, + struct ixgbe_q_vector, napi); + struct ixgbe_adapter *adapter = q_vector->adapter; int tx_cleaned = 0, work_done = 0; - /* In non-MSIX case, there is no multi-Tx/Rx queue */ tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); - ixgbe_clean_rx_irq(adapter, &adapter->rx_ring[0], &work_done, - budget); + ixgbe_clean_rx_irq(adapter, adapter->rx_ring, &work_done, budget); if (tx_cleaned) work_done = budget; /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { - netif_rx_complete(netdev, napi); + netif_rx_complete(adapter->netdev, napi); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable(adapter); } @@ -1597,6 +1749,132 @@ static void ixgbe_reset_task(struct work_struct *work) ixgbe_reinit_locked(adapter); } +static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, + int vectors) +{ + int err, vector_threshold; + + /* We'll want at least 3 (vector_threshold): + * 1) TxQ[0] Cleanup + * 2) RxQ[0] Cleanup + * 3) Other (Link Status Change, etc.) + * 4) TCP Timer (optional) + */ + vector_threshold = MIN_MSIX_COUNT; + + /* The more we get, the more we will assign to Tx/Rx Cleanup + * for the separate queues...where Rx Cleanup >= Tx Cleanup. + * Right now, we simply care about how many we'll get; we'll + * set them up later while requesting irq's. + */ + while (vectors >= vector_threshold) { + err = pci_enable_msix(adapter->pdev, adapter->msix_entries, + vectors); + if (!err) /* Success in acquiring all requested vectors. */ + break; + else if (err < 0) + vectors = 0; /* Nasty failure, quit now */ + else /* err == number of vectors we should try again with */ + vectors = err; + } + + if (vectors < vector_threshold) { + /* Can't allocate enough MSI-X interrupts? Oh well. + * This just means we'll go with either a single MSI + * vector or fall back to legacy interrupts. + */ + DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n"); + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + adapter->num_tx_queues = 1; + adapter->num_rx_queues = 1; + } else { + adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */ + adapter->num_msix_vectors = vectors; + } +} + +static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter) +{ + int nrq, ntq; + int feature_mask = 0, rss_i, rss_m; + + /* Number of supported queues */ + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + rss_i = adapter->ring_feature[RING_F_RSS].indices; + rss_m = 0; + feature_mask |= IXGBE_FLAG_RSS_ENABLED; + + switch (adapter->flags & feature_mask) { + case (IXGBE_FLAG_RSS_ENABLED): + rss_m = 0xF; + nrq = rss_i; + ntq = 1; + break; + case 0: + default: + rss_i = 0; + rss_m = 0; + nrq = 1; + ntq = 1; + break; + } + + adapter->ring_feature[RING_F_RSS].indices = rss_i; + adapter->ring_feature[RING_F_RSS].mask = rss_m; + break; + default: + nrq = 1; + ntq = 1; + break; + } + + adapter->num_rx_queues = nrq; + adapter->num_tx_queues = ntq; +} + +/** + * ixgbe_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + **/ +static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +{ + /* TODO: Remove all uses of the indices in the cases where multiple + * features are OR'd together, if the feature set makes sense. + */ + int feature_mask = 0, rss_i; + int i, txr_idx, rxr_idx; + + /* Number of supported queues */ + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + rss_i = adapter->ring_feature[RING_F_RSS].indices; + txr_idx = 0; + rxr_idx = 0; + feature_mask |= IXGBE_FLAG_RSS_ENABLED; + switch (adapter->flags & feature_mask) { + case (IXGBE_FLAG_RSS_ENABLED): + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].reg_idx = i; + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].reg_idx = i; + break; + case 0: + default: + break; + } + break; + default: + break; + } +} + /** * ixgbe_alloc_queues - Allocate memory for all rings * @adapter: board private structure to initialize @@ -1612,25 +1890,163 @@ static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) adapter->tx_ring = kcalloc(adapter->num_tx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); if (!adapter->tx_ring) - return -ENOMEM; - - for (i = 0; i < adapter->num_tx_queues; i++) - adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD; + goto err_tx_ring_allocation; adapter->rx_ring = kcalloc(adapter->num_rx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); - if (!adapter->rx_ring) { - kfree(adapter->tx_ring); - return -ENOMEM; - } + if (!adapter->rx_ring) + goto err_rx_ring_allocation; + for (i = 0; i < adapter->num_tx_queues; i++) { + adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD; + adapter->tx_ring[i].queue_index = i; + } for (i = 0; i < adapter->num_rx_queues; i++) { - adapter->rx_ring[i].adapter = adapter; - adapter->rx_ring[i].itr_register = IXGBE_EITR(i); adapter->rx_ring[i].count = IXGBE_DEFAULT_RXD; + adapter->rx_ring[i].queue_index = i; + } + + ixgbe_cache_ring_register(adapter); + + return 0; + +err_rx_ring_allocation: + kfree(adapter->tx_ring); +err_tx_ring_allocation: + return -ENOMEM; +} + +/** + * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported + * @adapter: board private structure to initialize + * + * Attempt to configure the interrupts using the best available + * capabilities of the hardware and the kernel. + **/ +static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter + *adapter) +{ + int err = 0; + int vector, v_budget; + + /* + * It's easy to be greedy for MSI-X vectors, but it really + * doesn't do us much good if we have a lot more vectors + * than CPU's. So let's be conservative and only ask for + * (roughly) twice the number of vectors as there are CPU's. + */ + v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues, + (int)(num_online_cpus() * 2)) + NON_Q_VECTORS; + + /* + * At the same time, hardware can only support a maximum of + * MAX_MSIX_COUNT vectors. With features such as RSS and VMDq, + * we can easily reach upwards of 64 Rx descriptor queues and + * 32 Tx queues. Thus, we cap it off in those rare cases where + * the cpu count also exceeds our vector limit. + */ + v_budget = min(v_budget, MAX_MSIX_COUNT); + + /* A failure in MSI-X entry allocation isn't fatal, but it does + * mean we disable MSI-X capabilities of the adapter. */ + adapter->msix_entries = kcalloc(v_budget, + sizeof(struct msix_entry), GFP_KERNEL); + if (!adapter->msix_entries) { + adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + ixgbe_set_num_queues(adapter); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + err = ixgbe_alloc_queues(adapter); + if (err) { + DPRINTK(PROBE, ERR, "Unable to allocate memory " + "for queues\n"); + goto out; + } + + goto try_msi; + } + + for (vector = 0; vector < v_budget; vector++) + adapter->msix_entries[vector].entry = vector; + + ixgbe_acquire_msix_vectors(adapter, v_budget); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + goto out; + +try_msi: + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->flags |= IXGBE_FLAG_MSI_ENABLED; + } else { + DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, " + "falling back to legacy. Error: %d\n", err); + /* reset err */ + err = 0; + } + +out: + + return err; +} + +static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) +{ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; + pci_disable_msi(adapter->pdev); + } + return; +} + +/** + * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme + * @adapter: board private structure to initialize + * + * We determine which interrupt scheme to use based on... + * - Kernel support (MSI, MSI-X) + * - which can be user-defined (via MODULE_PARAM) + * - Hardware queue count (num_*_queues) + * - defined by miscellaneous hardware support/features (RSS, etc.) + **/ +static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +{ + int err; + + /* Number of supported queues */ + ixgbe_set_num_queues(adapter); + + err = ixgbe_alloc_queues(adapter); + if (err) { + DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); + goto err_alloc_queues; + } + + err = ixgbe_set_interrupt_capability(adapter); + if (err) { + DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n"); + goto err_set_interrupt; } + DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, " + "Tx Queue count = %u\n", + (adapter->num_rx_queues > 1) ? "Enabled" : + "Disabled", adapter->num_rx_queues, adapter->num_tx_queues); + + set_bit(__IXGBE_DOWN, &adapter->state); + return 0; + +err_set_interrupt: + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +err_alloc_queues: + return err; } /** @@ -1645,11 +2061,18 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; + unsigned int rss; + + /* Set capability flags */ + rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus()); + adapter->ring_feature[RING_F_RSS].indices = rss; + adapter->flags |= IXGBE_FLAG_RSS_ENABLED; /* default flow control settings */ hw->fc.original_type = ixgbe_fc_full; hw->fc.type = ixgbe_fc_full; + /* select 10G link by default */ hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; if (hw->mac.ops.reset(hw)) { dev_err(&pdev->dev, "HW Init failed\n"); @@ -1667,16 +2090,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) return -EIO; } - /* Set the default values */ - adapter->num_rx_queues = IXGBE_DEFAULT_RXQ; - adapter->num_tx_queues = 1; + /* enable rx csum by default */ adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; - if (ixgbe_alloc_queues(adapter)) { - dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); - return -ENOMEM; - } - set_bit(__IXGBE_DOWN, &adapter->state); return 0; @@ -1716,7 +2132,6 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, return -ENOMEM; } - txdr->adapter = adapter; txdr->next_to_use = 0; txdr->next_to_clean = 0; txdr->work_limit = txdr->count; @@ -1735,7 +2150,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, struct ixgbe_ring *rxdr) { struct pci_dev *pdev = adapter->pdev; - int size, desc_len; + int size; size = sizeof(struct ixgbe_rx_buffer) * rxdr->count; rxdr->rx_buffer_info = vmalloc(size); @@ -1746,10 +2161,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, } memset(rxdr->rx_buffer_info, 0, size); - desc_len = sizeof(union ixgbe_adv_rx_desc); - /* Round up to nearest 4K */ - rxdr->size = rxdr->count * desc_len; + rxdr->size = rxdr->count * sizeof(union ixgbe_adv_rx_desc); rxdr->size = ALIGN(rxdr->size, 4096); rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); @@ -1763,7 +2176,6 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, rxdr->next_to_clean = 0; rxdr->next_to_use = 0; - rxdr->adapter = adapter; return 0; } @@ -1841,8 +2253,7 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) } /** - * ixgbe_setup_all_tx_resources - wrapper to allocate Tx resources - * (Descriptors) for all queues + * ixgbe_setup_all_tx_resources - allocate all queues Tx resources * @adapter: board private structure * * If this function returns with an error, then it's possible one or @@ -1868,8 +2279,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) } /** - * ixgbe_setup_all_rx_resources - wrapper to allocate Rx resources - * (Descriptors) for all queues + * ixgbe_setup_all_rx_resources - allocate all queues Rx resources * @adapter: board private structure * * If this function returns with an error, then it's possible one or @@ -1911,6 +2321,9 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) return -EINVAL; + DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n", + netdev->mtu, new_mtu); + /* must set new MTU before calling down or up */ netdev->mtu = new_mtu; if (netif_running(netdev)) @@ -1935,23 +2348,16 @@ static int ixgbe_open(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); int err; - u32 num_rx_queues = adapter->num_rx_queues; /* disallow open during test */ if (test_bit(__IXGBE_TESTING, &adapter->state)) return -EBUSY; -try_intr_reinit: /* allocate transmit descriptors */ err = ixgbe_setup_all_tx_resources(adapter); if (err) goto err_setup_tx; - if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { - num_rx_queues = 1; - adapter->num_rx_queues = num_rx_queues; - } - /* allocate receive descriptors */ err = ixgbe_setup_all_rx_resources(adapter); if (err) @@ -1959,31 +2365,10 @@ try_intr_reinit: ixgbe_configure(adapter); - err = ixgbe_request_irq(adapter, &num_rx_queues); + err = ixgbe_request_irq(adapter); if (err) goto err_req_irq; - /* ixgbe_request might have reduced num_rx_queues */ - if (num_rx_queues < adapter->num_rx_queues) { - /* We didn't get MSI-X, so we need to release everything, - * set our Rx queue count to num_rx_queues, and redo the - * whole init process. - */ - ixgbe_free_irq(adapter); - if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { - pci_disable_msi(adapter->pdev); - adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; - } - ixgbe_free_all_rx_resources(adapter); - ixgbe_free_all_tx_resources(adapter); - adapter->num_rx_queues = num_rx_queues; - - /* Reset the hardware, and start over. */ - ixgbe_reset(adapter); - - goto try_intr_reinit; - } - err = ixgbe_up_complete(adapter); if (err) goto err_up; @@ -2154,10 +2539,23 @@ static void ixgbe_watchdog(unsigned long data) ixgbe_update_stats(adapter); - /* Reset the timer */ - if (!test_bit(__IXGBE_DOWN, &adapter->state)) + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + /* Cause software interrupt to ensure rx rings are cleaned */ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + u32 eics = + (1 << (adapter->num_msix_vectors - NON_Q_VECTORS)) - 1; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, eics); + } else { + /* for legacy and MSI interrupts don't set any bits that + * are enabled for EIAM, because this operation would + * set *both* EIMS and EICS for any bit in EIAM */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, + (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); + } + /* Reset the timer */ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ)); + } } static int ixgbe_tso(struct ixgbe_adapter *adapter, @@ -2604,6 +3002,31 @@ static void ixgbe_netpoll(struct net_device *netdev) #endif /** + * ixgbe_napi_add_all - prep napi structs for use + * @adapter: private struct + * helper function to napi_add each possible q_vector->napi + */ +static void ixgbe_napi_add_all(struct ixgbe_adapter *adapter) +{ + int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + int (*poll)(struct napi_struct *, int); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + poll = &ixgbe_clean_rxonly; + } else { + poll = &ixgbe_poll; + /* only one q_vector for legacy modes */ + q_vectors = 1; + } + + for (i = 0; i < q_vectors; i++) { + struct ixgbe_q_vector *q_vector = &adapter->q_vector[i]; + netif_napi_add(adapter->netdev, &q_vector->napi, + (*poll), 64); + } +} + +/** * ixgbe_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in ixgbe_pci_tbl @@ -2696,7 +3119,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, ixgbe_set_ethtool_ops(netdev); netdev->tx_timeout = &ixgbe_tx_timeout; netdev->watchdog_timeo = 5 * HZ; - netif_napi_add(netdev, &adapter->napi, ixgbe_clean, 64); netdev->vlan_rx_register = ixgbe_vlan_rx_register; netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid; netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid; @@ -2719,6 +3141,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* Setup hw api */ memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); + hw->mac.type = ii->mac; err = ii->get_invariants(hw); if (err) @@ -2770,9 +3193,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->fc.low_water = IXGBE_DEFAULT_FCRTL; hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; - /* Interrupt Throttle Rate */ - adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS); - adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS); + err = ixgbe_init_interrupt_scheme(adapter); + if (err) + goto err_sw_init; /* print bus type/speed/width info */ pci_read_config_word(pdev, IXGBE_PCI_LINK_STATUS, &link_status); @@ -2809,6 +3232,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netif_carrier_off(netdev); netif_stop_queue(netdev); + ixgbe_napi_add_all(adapter); + strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); if (err) @@ -2823,6 +3248,7 @@ err_register: ixgbe_release_hw_control(adapter); err_hw_init: err_sw_init: + ixgbe_reset_interrupt_capability(adapter); err_eeprom: iounmap(hw->hw_addr); err_ioremap: @@ -2856,14 +3282,17 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) unregister_netdev(netdev); - ixgbe_release_hw_control(adapter); + ixgbe_reset_interrupt_capability(adapter); - kfree(adapter->tx_ring); - kfree(adapter->rx_ring); + ixgbe_release_hw_control(adapter); iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); + DPRINTK(PROBE, INFO, "complete\n"); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + free_netdev(netdev); pci_disable_device(pdev); -- cgit v1.1 From 30eba97a3f076cf4e100b598ee9a1b1439b0cfaa Mon Sep 17 00:00:00 2001 From: Ayyappan Veeraiyan Date: Mon, 3 Mar 2008 15:03:52 -0800 Subject: ixgbe: Introduce Multiqueue TX Now that the irq vector code is in place, we can add the conditional multiqueue TX code in the driver. This requires the optional CONFIG_NETDEVICES_MULTIQUEUE=y and will not be enabled without it. Signed-off-by: Ayyappan Veeraiyan Signed-off-by: Auke Kok Acked-by: Waskiewicz Jr, Peter P Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_ethtool.c | 15 ++++++++++- drivers/net/ixgbe/ixgbe_main.c | 56 ++++++++++++++++++++++++++++++++++++--- 2 files changed, 66 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index a119cbd..85b7d15 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -246,13 +246,26 @@ static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data) static int ixgbe_set_tso(struct net_device *netdev, u32 data) { - if (data) { netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; } else { +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i; +#endif + netif_stop_queue(netdev); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + for (i = 0; i < adapter->num_tx_queues; i++) + netif_stop_subqueue(netdev, i); +#endif netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + for (i = 0; i < adapter->num_tx_queues; i++) + netif_start_subqueue(netdev, i); +#endif + netif_start_queue(netdev); } return 0; } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index fecc8ea..fc1c226 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -256,16 +256,28 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) && + !test_bit(__IXGBE_DOWN, &adapter->state)) { + netif_wake_subqueue(netdev, tx_ring->queue_index); + adapter->restart_queue++; + } +#else if (netif_queue_stopped(netdev) && !test_bit(__IXGBE_DOWN, &adapter->state)) { netif_wake_queue(netdev); adapter->restart_queue++; } +#endif } if (adapter->detect_tx_hung) if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc)) +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + netif_stop_subqueue(netdev, tx_ring->queue_index); +#else netif_stop_queue(netdev); +#endif if (total_tx_packets >= tx_ring->work_limit) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); @@ -1812,7 +1824,11 @@ static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter) case (IXGBE_FLAG_RSS_ENABLED): rss_m = 0xF; nrq = rss_i; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + ntq = rss_i; +#else ntq = 1; +#endif break; case 0: default: @@ -1986,6 +2002,10 @@ try_msi: } out: +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + /* Notify the stack of the (possibly) reduced Tx Queue count. */ + adapter->netdev->egress_subqueue_count = adapter->num_tx_queues; +#endif return err; } @@ -2504,6 +2524,9 @@ static void ixgbe_watchdog(unsigned long data) struct net_device *netdev = adapter->netdev; bool link_up; u32 link_speed = 0; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + int i; +#endif adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up); @@ -2525,6 +2548,10 @@ static void ixgbe_watchdog(unsigned long data) netif_carrier_on(netdev); netif_wake_queue(netdev); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + for (i = 0; i < adapter->num_tx_queues; i++) + netif_wake_subqueue(netdev, i); +#endif } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -2568,7 +2595,6 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter, struct ixgbe_tx_buffer *tx_buffer_info; u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; u32 mss_l4len_idx = 0, l4len; - *hdr_len = 0; if (skb_is_gso(skb)) { if (skb_header_cloned(skb)) { @@ -2852,7 +2878,11 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + netif_stop_subqueue(netdev, tx_ring->queue_index); +#else netif_stop_queue(netdev); +#endif /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ @@ -2864,7 +2894,11 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev, return -EBUSY; /* A reprieve! - use start_queue because it doesn't call schedule */ +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + netif_wake_subqueue(netdev, tx_ring->queue_index); +#else netif_wake_queue(netdev); +#endif ++adapter->restart_queue; return 0; } @@ -2885,15 +2919,18 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int len = skb->len; unsigned int first; unsigned int tx_flags = 0; - u8 hdr_len; - int tso; + u8 hdr_len = 0; + int r_idx = 0, tso; unsigned int mss = 0; int count = 0; unsigned int f; unsigned int nr_frags = skb_shinfo(skb)->nr_frags; len -= skb->data_len; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping; +#endif + tx_ring = &adapter->tx_ring[r_idx]; - tx_ring = adapter->tx_ring; if (skb->len <= 0) { dev_kfree_skb(skb); @@ -3078,7 +3115,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, pci_set_master(pdev); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES); +#else netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); +#endif if (!netdev) { err = -ENOMEM; goto err_alloc_etherdev; @@ -3164,6 +3205,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + netdev->features |= NETIF_F_MULTI_QUEUE; +#endif /* make sure the EEPROM is good */ if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) { @@ -3231,6 +3275,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netif_carrier_off(netdev); netif_stop_queue(netdev); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + for (i = 0; i < adapter->num_tx_queues; i++) + netif_stop_subqueue(netdev, i); +#endif ixgbe_napi_add_all(adapter); -- cgit v1.1 From f494e8faa77bd4147324f7666441e0b780e7db94 Mon Sep 17 00:00:00 2001 From: Ayyappan Veeraiyan Date: Mon, 3 Mar 2008 15:03:57 -0800 Subject: ixgbe: Introduce adaptive interrupt moderation 82598 can produce a formidable interrupt rate, and is largely unusable without some form of moderation. The default behaviour before this patch is to limit irq's to a reasonable number. However, just like our other drivers we can reduce latency for small packet-type traffic considerably by allowing the irq rate to go up dynamically. This patch introduces a simple irq moderation algorithm based on traffic analysis. The driver will use more CPU to service small packets quicker but will perform the same on bulk traffic as the old code. Signed-off-by: Ayyappan Veeraiyan Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe.h | 9 ++ drivers/net/ixgbe/ixgbe_ethtool.c | 24 +++-- drivers/net/ixgbe/ixgbe_main.c | 211 +++++++++++++++++++++++++++++++++++++- 3 files changed, 232 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 2077477..79f5519 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -136,6 +136,8 @@ struct ixgbe_ring { u16 head; u16 tail; + unsigned int total_bytes; + unsigned int total_packets; u16 reg_idx; /* holds the special value that gets the hardware register * offset associated with this ring, which is different @@ -174,6 +176,8 @@ struct ixgbe_q_vector { DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */ u8 rxr_count; /* Rx ring count assigned to this vector */ u8 txr_count; /* Tx ring count assigned to this vector */ + u8 tx_eitr; + u8 rx_eitr; u32 eitr; }; @@ -215,6 +219,11 @@ struct ixgbe_adapter { struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS]; char name[MAX_MSIX_COUNT][IFNAMSIZ + 5]; + /* Interrupt Throttle Rate */ + u32 itr_setting; + u16 eitr_low; + u16 eitr_high; + /* TX */ struct ixgbe_ring *tx_ring; /* One per active queue */ u64 restart_queue; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 85b7d15..4e46377 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -886,13 +886,13 @@ static int ixgbe_get_coalesce(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); - if (adapter->rx_eitr == 0) - ec->rx_coalesce_usecs = 0; + if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) + ec->rx_coalesce_usecs = adapter->rx_eitr; else ec->rx_coalesce_usecs = 1000000 / adapter->rx_eitr; - if (adapter->tx_eitr == 0) - ec->tx_coalesce_usecs = 0; + if (adapter->tx_eitr < IXGBE_MIN_ITR_USECS) + ec->tx_coalesce_usecs = adapter->tx_eitr; else ec->tx_coalesce_usecs = 1000000 / adapter->tx_eitr; @@ -906,22 +906,26 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); if ((ec->rx_coalesce_usecs > IXGBE_MAX_ITR_USECS) || - ((ec->rx_coalesce_usecs > 0) && + ((ec->rx_coalesce_usecs != 0) && + (ec->rx_coalesce_usecs != 1) && + (ec->rx_coalesce_usecs != 3) && (ec->rx_coalesce_usecs < IXGBE_MIN_ITR_USECS))) return -EINVAL; if ((ec->tx_coalesce_usecs > IXGBE_MAX_ITR_USECS) || - ((ec->tx_coalesce_usecs > 0) && + ((ec->tx_coalesce_usecs != 0) && + (ec->tx_coalesce_usecs != 1) && + (ec->tx_coalesce_usecs != 3) && (ec->tx_coalesce_usecs < IXGBE_MIN_ITR_USECS))) return -EINVAL; /* convert to rate of irq's per second */ - if (ec->rx_coalesce_usecs == 0) - adapter->rx_eitr = 0; + if (ec->rx_coalesce_usecs < IXGBE_MIN_ITR_USECS) + adapter->rx_eitr = ec->rx_coalesce_usecs; else adapter->rx_eitr = (1000000 / ec->rx_coalesce_usecs); - if (ec->tx_coalesce_usecs == 0) - adapter->tx_eitr = 0; + if (ec->tx_coalesce_usecs < IXGBE_MIN_ITR_USECS) + adapter->tx_eitr = ec->rx_coalesce_usecs; else adapter->tx_eitr = (1000000 / ec->tx_coalesce_usecs); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index fc1c226..e1f11e6 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -282,6 +282,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, if (total_tx_packets >= tx_ring->work_limit) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); + tx_ring->total_bytes += total_tx_bytes; + tx_ring->total_packets += total_tx_packets; adapter->net_stats.tx_bytes += total_tx_bytes; adapter->net_stats.tx_packets += total_tx_packets; cleaned = total_tx_packets ? true : false; @@ -568,6 +570,11 @@ next_desc: adapter->net_stats.rx_bytes += total_rx_bytes; adapter->net_stats.rx_packets += total_rx_packets; + rx_ring->total_packets += total_rx_packets; + rx_ring->total_bytes += total_rx_bytes; + adapter->net_stats.rx_bytes += total_rx_bytes; + adapter->net_stats.rx_packets += total_rx_packets; + return cleaned; } @@ -634,6 +641,144 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); } +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * ixgbe_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @eitr: eitr setting (ints per sec) to give last timeslice + * @itr_setting: current throttle rate in ints/second + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see ixgbe_param.c) + **/ +static u8 ixgbe_update_itr(struct ixgbe_adapter *adapter, + u32 eitr, u8 itr_setting, + int packets, int bytes) +{ + unsigned int retval = itr_setting; + u32 timepassed_us; + u64 bytes_perint; + + if (packets == 0) + goto update_itr_done; + + + /* simple throttlerate management + * 0-20MB/s lowest (100000 ints/s) + * 20-100MB/s low (20000 ints/s) + * 100-1249MB/s bulk (8000 ints/s) + */ + /* what was last interrupt timeslice? */ + timepassed_us = 1000000/eitr; + bytes_perint = bytes / timepassed_us; /* bytes/usec */ + + switch (itr_setting) { + case lowest_latency: + if (bytes_perint > adapter->eitr_low) + retval = low_latency; + break; + case low_latency: + if (bytes_perint > adapter->eitr_high) + retval = bulk_latency; + else if (bytes_perint <= adapter->eitr_low) + retval = lowest_latency; + break; + case bulk_latency: + if (bytes_perint <= adapter->eitr_high) + retval = low_latency; + break; + } + +update_itr_done: + return retval; +} + +static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_hw *hw = &adapter->hw; + u32 new_itr; + u8 current_itr, ret_itr; + int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) / + sizeof(struct ixgbe_q_vector); + struct ixgbe_ring *rx_ring, *tx_ring; + + r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); + for (i = 0; i < q_vector->txr_count; i++) { + tx_ring = &(adapter->tx_ring[r_idx]); + ret_itr = ixgbe_update_itr(adapter, q_vector->eitr, + q_vector->tx_eitr, + tx_ring->total_packets, + tx_ring->total_bytes); + /* if the result for this queue would decrease interrupt + * rate for this vector then use that result */ + q_vector->tx_eitr = ((q_vector->tx_eitr > ret_itr) ? + q_vector->tx_eitr - 1 : ret_itr); + r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, + r_idx + 1); + } + + r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); + for (i = 0; i < q_vector->rxr_count; i++) { + rx_ring = &(adapter->rx_ring[r_idx]); + ret_itr = ixgbe_update_itr(adapter, q_vector->eitr, + q_vector->rx_eitr, + rx_ring->total_packets, + rx_ring->total_bytes); + /* if the result for this queue would decrease interrupt + * rate for this vector then use that result */ + q_vector->rx_eitr = ((q_vector->rx_eitr > ret_itr) ? + q_vector->rx_eitr - 1 : ret_itr); + r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, + r_idx + 1); + } + + current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr); + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 100000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + default: + new_itr = 8000; + break; + } + + if (new_itr != q_vector->eitr) { + u32 itr_reg; + /* do an exponential smoothing */ + new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); + q_vector->eitr = new_itr; + itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); + /* must write high and low 16 bits to reset counter */ + DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx, + itr_reg); + IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16); + } + + return; +} + static irqreturn_t ixgbe_msix_lsc(int irq, void *data) { struct net_device *netdev = data; @@ -666,12 +811,13 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); for (i = 0; i < q_vector->txr_count; i++) { txr = &(adapter->tx_ring[r_idx]); + txr->total_bytes = 0; + txr->total_packets = 0; ixgbe_clean_tx_irq(adapter, txr); r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, r_idx + 1); } - return IRQ_HANDLED; } @@ -694,6 +840,8 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) rxr = &(adapter->rx_ring[r_idx]); /* disable interrupts on this vector only */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->v_idx); + rxr->total_bytes = 0; + rxr->total_packets = 0; netif_rx_schedule(adapter->netdev, &q_vector->napi); return IRQ_HANDLED; @@ -730,6 +878,8 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { netif_rx_complete(adapter->netdev, napi); + if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) + ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rxr->v_idx); } @@ -886,6 +1036,54 @@ out: return err; } +static void ixgbe_set_itr(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_q_vector *q_vector = adapter->q_vector; + u8 current_itr; + u32 new_itr = q_vector->eitr; + struct ixgbe_ring *rx_ring = &adapter->rx_ring[0]; + struct ixgbe_ring *tx_ring = &adapter->tx_ring[0]; + + q_vector->tx_eitr = ixgbe_update_itr(adapter, new_itr, + q_vector->tx_eitr, + tx_ring->total_packets, + tx_ring->total_bytes); + q_vector->rx_eitr = ixgbe_update_itr(adapter, new_itr, + q_vector->rx_eitr, + rx_ring->total_packets, + rx_ring->total_bytes); + + current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr); + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 100000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 8000; + break; + default: + break; + } + + if (new_itr != q_vector->eitr) { + u32 itr_reg; + /* do an exponential smoothing */ + new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); + q_vector->eitr = new_itr; + itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); + /* must write high and low 16 bits to reset counter */ + IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16); + } + + return; +} + static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); /** @@ -916,6 +1114,10 @@ static irqreturn_t ixgbe_intr(int irq, void *data) if (netif_rx_schedule_prep(netdev, &adapter->q_vector[0].napi)) { + adapter->tx_ring[0].total_packets = 0; + adapter->tx_ring[0].total_bytes = 0; + adapter->rx_ring[0].total_packets = 0; + adapter->rx_ring[0].total_bytes = 0; /* would disable interrupts here but EIAM disabled it */ __netif_rx_schedule(netdev, &adapter->q_vector[0].napi); } @@ -1367,7 +1569,6 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) } } - static void ixgbe_configure(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -1732,6 +1933,8 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { netif_rx_complete(adapter->netdev, napi); + if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) + ixgbe_set_itr(adapter); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable(adapter); } @@ -2088,6 +2291,10 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->ring_feature[RING_F_RSS].indices = rss; adapter->flags |= IXGBE_FLAG_RSS_ENABLED; + /* Enable Dynamic interrupt throttling by default */ + adapter->rx_eitr = 1; + adapter->tx_eitr = 1; + /* default flow control settings */ hw->fc.original_type = ixgbe_fc_full; hw->fc.type = ixgbe_fc_full; -- cgit v1.1 From bd0362dde080cef377d99fa5beb5c25308c29c73 Mon Sep 17 00:00:00 2001 From: Jeb Cramer Date: Mon, 3 Mar 2008 15:04:02 -0800 Subject: ixgbe: Add optional DCA infrastructure 82598 cards and up support DCA, which enables the chipset to warm up the caches for upcoming payload data. This code makes the driver plug into the CONFIG_DCA infrastructure that was merged earlier. Signed-off-by: Jeb Cramer Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe.h | 9 +++ drivers/net/ixgbe/ixgbe_main.c | 148 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 157 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 79f5519..d981134 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -36,6 +36,9 @@ #include "ixgbe_type.h" #include "ixgbe_common.h" +#ifdef CONFIG_DCA +#include +#endif #define IXGBE_ERR(args...) printk(KERN_ERR "ixgbe: " args) @@ -142,6 +145,11 @@ struct ixgbe_ring { u16 reg_idx; /* holds the special value that gets the hardware register * offset associated with this ring, which is different * for DCE and RSS modes */ + +#ifdef CONFIG_DCA + /* cpu for tx queue */ + int cpu; +#endif struct ixgbe_queue_stats stats; u8 v_idx; /* maps directly to the index for this ring in the hardware * vector array, can also be used for finding the bit in EICR @@ -261,6 +269,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5) #define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 6) #define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 7) +#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 8) /* OS defined structs */ struct net_device *netdev; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e1f11e6..da8becf 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -80,6 +80,16 @@ static struct pci_device_id ixgbe_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); +#ifdef CONFIG_DCA +static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, + void *p); +static struct notifier_block dca_notifier = { + .notifier_call = ixgbe_notify_dca, + .next = NULL, + .priority = 0 +}; +#endif + MODULE_AUTHOR("Intel Corporation, "); MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); MODULE_LICENSE("GPL"); @@ -290,6 +300,91 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, return cleaned; } +#ifdef CONFIG_DCA +static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rxr) +{ + u32 rxctrl; + int cpu = get_cpu(); + int q = rxr - adapter->rx_ring; + + if (rxr->cpu != cpu) { + rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q)); + rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; + rxctrl |= dca_get_tag(cpu); + rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; + rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); + rxr->cpu = cpu; + } + put_cpu(); +} + +static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, + struct ixgbe_ring *txr) +{ + u32 txctrl; + int cpu = get_cpu(); + int q = txr - adapter->tx_ring; + + if (txr->cpu != cpu) { + txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); + txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; + txctrl |= dca_get_tag(cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); + txr->cpu = cpu; + } + put_cpu(); +} + +static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) +{ + int i; + + if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) + return; + + for (i = 0; i < adapter->num_tx_queues; i++) { + adapter->tx_ring[i].cpu = -1; + ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]); + } + for (i = 0; i < adapter->num_rx_queues; i++) { + adapter->rx_ring[i].cpu = -1; + ixgbe_update_rx_dca(adapter, &adapter->rx_ring[i]); + } +} + +static int __ixgbe_notify_dca(struct device *dev, void *data) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct ixgbe_adapter *adapter = netdev_priv(netdev); + unsigned long event = *(unsigned long *)data; + + switch (event) { + case DCA_PROVIDER_ADD: + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + /* Always use CB2 mode, difference is masked + * in the CB driver. */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); + if (dca_add_requester(dev) == IXGBE_SUCCESS) { + ixgbe_setup_dca(adapter); + break; + } + /* Fall Through since DCA is disabled. */ + case DCA_PROVIDER_REMOVE: + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + dca_remove_requester(dev); + adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + } + break; + } + + return IXGBE_SUCCESS; +} + +#endif /* CONFIG_DCA */ /** * ixgbe_receive_skb - Send a completed packet up the stack * @adapter: board private structure @@ -811,6 +906,10 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); for (i = 0; i < q_vector->txr_count; i++) { txr = &(adapter->tx_ring[r_idx]); +#ifdef CONFIG_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + ixgbe_update_tx_dca(adapter, txr); +#endif txr->total_bytes = 0; txr->total_packets = 0; ixgbe_clean_tx_irq(adapter, txr); @@ -872,6 +971,10 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); rxr = &(adapter->rx_ring[r_idx]); +#ifdef CONFIG_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + ixgbe_update_rx_dca(adapter, rxr); +#endif ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget); @@ -1924,6 +2027,13 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) struct ixgbe_adapter *adapter = q_vector->adapter; int tx_cleaned = 0, work_done = 0; +#ifdef CONFIG_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + ixgbe_update_tx_dca(adapter, adapter->tx_ring); + ixgbe_update_rx_dca(adapter, adapter->rx_ring); + } +#endif + tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); ixgbe_clean_rx_irq(adapter, adapter->rx_ring, &work_done, budget); @@ -3494,6 +3604,15 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (err) goto err_register; +#ifdef CONFIG_DCA + if (dca_add_requester(&pdev->dev) == IXGBE_SUCCESS) { + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + /* always use CB2 mode, difference is masked + * in the CB driver */ + IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2); + ixgbe_setup_dca(adapter); + } +#endif dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n"); cards_found++; @@ -3535,6 +3654,14 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) flush_scheduled_work(); +#ifdef CONFIG_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; + dca_remove_requester(&pdev->dev); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + } + +#endif unregister_netdev(netdev); ixgbe_reset_interrupt_capability(adapter); @@ -3659,6 +3786,10 @@ static int __init ixgbe_init_module(void) printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright); +#ifdef CONFIG_DCA + dca_register_notify(&dca_notifier); + +#endif ret = pci_register_driver(&ixgbe_driver); return ret; } @@ -3672,8 +3803,25 @@ module_init(ixgbe_init_module); **/ static void __exit ixgbe_exit_module(void) { +#ifdef CONFIG_DCA + dca_unregister_notify(&dca_notifier); +#endif pci_unregister_driver(&ixgbe_driver); } + +#ifdef CONFIG_DCA +static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int ret_val; + + ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, + __ixgbe_notify_dca); + + return ret_val ? NOTIFY_BAD : NOTIFY_DONE; +} +#endif /* CONFIG_DCA */ + module_exit(ixgbe_exit_module); /* ixgbe_main.c */ -- cgit v1.1 From ef8500457b29eed13d03ff19af36d810308e57b7 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 3 Mar 2008 15:04:07 -0800 Subject: ixgbe: Increment version Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index da8becf..7ad2993 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "1.1.18" +#define DRV_VERSION "1.3.18-k2" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation."; -- cgit v1.1