From c6da2cfeb05178a11c6d062a06f8078150ee492f Mon Sep 17 00:00:00 2001 From: codeworkx Date: Sat, 2 Jun 2012 13:09:29 +0200 Subject: samsung update 1 --- include/compat/linux/ath9k_platform.h | 37 + include/compat/linux/atomic.h | 46 + include/compat/linux/average.h | 5 + include/compat/linux/bcma/bcma.h | 277 ++ include/compat/linux/bcma/bcma_driver_chipcommon.h | 390 +++ include/compat/linux/bcma/bcma_driver_mips.h | 51 + include/compat/linux/bcma/bcma_driver_pci.h | 91 + include/compat/linux/bcma/bcma_regs.h | 59 + include/compat/linux/bcma/bcma_soc.h | 16 + include/compat/linux/bitops.h | 211 ++ include/compat/linux/compat-2.6.14.h | 13 + include/compat/linux/compat-2.6.18.h | 13 + include/compat/linux/compat-2.6.19.h | 24 + include/compat/linux/compat-2.6.20.h | 21 + include/compat/linux/compat-2.6.21.h | 18 + include/compat/linux/compat-2.6.22.h | 104 + include/compat/linux/compat-2.6.23.h | 136 + include/compat/linux/compat-2.6.24.h | 247 ++ include/compat/linux/compat-2.6.25.h | 179 + include/compat/linux/compat-2.6.26.h | 455 +++ include/compat/linux/compat-2.6.27.h | 261 ++ include/compat/linux/compat-2.6.28.h | 247 ++ include/compat/linux/compat-2.6.29.h | 324 ++ include/compat/linux/compat-2.6.30.h | 47 + include/compat/linux/compat-2.6.31.h | 221 ++ include/compat/linux/compat-2.6.32.h | 129 + include/compat/linux/compat-2.6.33.h | 172 + include/compat/linux/compat-2.6.34.h | 297 ++ include/compat/linux/compat-2.6.35.h | 48 + include/compat/linux/compat-2.6.36.h | 172 + include/compat/linux/compat-2.6.37.h | 140 + include/compat/linux/compat-2.6.38.h | 95 + include/compat/linux/compat-2.6.39.h | 169 + include/compat/linux/compat-2.6.h | 42 + include/compat/linux/compat-3.0.h | 130 + include/compat/linux/compat-3.1.h | 49 + include/compat/linux/compat-3.2.h | 81 + include/compat/linux/compat-3.3.h | 56 + include/compat/linux/compat_autoconf.h | 38 + include/compat/linux/cordic.h | 48 + include/compat/linux/crc8.h | 101 + include/compat/linux/eeprom_93cx6.h | 74 + include/compat/linux/export.h | 12 + include/compat/linux/ieee80211.h | 1852 ++++++++++ include/compat/linux/kfifo.h | 857 +++++ include/compat/linux/math64.h | 10 + include/compat/linux/nl80211.h | 2932 ++++++++++++++++ include/compat/linux/of.h | 16 + include/compat/linux/pci-aspm.h | 5 + include/compat/linux/pci_ids.h | 2879 +++++++++++++++ include/compat/linux/pm_qos.h | 12 + include/compat/linux/pm_qos_params.h | 36 + include/compat/linux/pm_runtime.h | 14 + include/compat/linux/printk.h | 12 + include/compat/linux/rfkill.h | 32 + include/compat/linux/rfkill_backport.h | 359 ++ include/compat/linux/semaphore.h | 12 + include/compat/linux/spi/libertas_spi.h | 29 + include/compat/linux/ssb/ssb.h | 538 +++ include/compat/linux/ssb/ssb_driver_chipcommon.h | 665 ++++ include/compat/linux/ssb/ssb_driver_extif.h | 214 ++ include/compat/linux/ssb/ssb_driver_gige.h | 179 + include/compat/linux/ssb/ssb_driver_mips.h | 46 + include/compat/linux/ssb/ssb_driver_pci.h | 130 + include/compat/linux/ssb/ssb_embedded.h | 18 + include/compat/linux/ssb/ssb_regs.h | 543 +++ include/compat/linux/tracepoint.h | 10 + include/compat/linux/unaligned/access_ok.h | 67 + include/compat/linux/unaligned/be_byteshift.h | 70 + include/compat/linux/unaligned/be_memmove.h | 36 + include/compat/linux/unaligned/be_struct.h | 36 + include/compat/linux/unaligned/generic.h | 68 + include/compat/linux/unaligned/le_byteshift.h | 70 + include/compat/linux/unaligned/le_memmove.h | 36 + include/compat/linux/unaligned/le_struct.h | 36 + include/compat/linux/unaligned/memmove.h | 45 + include/compat/linux/unaligned/packed_struct.h | 46 + include/compat/linux/usb/rndis_host.h | 272 ++ include/compat/linux/usb/usbnet.h | 231 ++ include/compat/linux/version.h | 2 + include/compat/linux/wakelock.h | 90 + include/compat/linux/wireless.h | 1162 ++++++ include/compat/linux/wl12xx.h | 78 + include/compat/net/bluetooth/bluetooth.h | 276 ++ include/compat/net/bluetooth/hci.h | 1334 +++++++ include/compat/net/bluetooth/hci_core.h | 988 ++++++ include/compat/net/bluetooth/l2cap.h | 814 +++++ include/compat/net/bluetooth/mgmt.h | 324 ++ include/compat/net/bluetooth/rfcomm.h | 372 ++ include/compat/net/bluetooth/smp.h | 140 + include/compat/net/cfg80211-wext.h | 55 + include/compat/net/cfg80211.h | 3407 ++++++++++++++++++ include/compat/net/ieee80211_radiotap.h | 283 ++ include/compat/net/lib80211.h | 124 + include/compat/net/mac80211.h | 3686 ++++++++++++++++++++ include/compat/net/net_namespace.h | 10 + include/compat/net/regulatory.h | 116 + 97 files changed, 31020 insertions(+) create mode 100755 include/compat/linux/ath9k_platform.h create mode 100755 include/compat/linux/atomic.h create mode 100755 include/compat/linux/average.h create mode 100755 include/compat/linux/bcma/bcma.h create mode 100755 include/compat/linux/bcma/bcma_driver_chipcommon.h create mode 100755 include/compat/linux/bcma/bcma_driver_mips.h create mode 100755 include/compat/linux/bcma/bcma_driver_pci.h create mode 100755 include/compat/linux/bcma/bcma_regs.h create mode 100755 include/compat/linux/bcma/bcma_soc.h create mode 100755 include/compat/linux/bitops.h create mode 100755 include/compat/linux/compat-2.6.14.h create mode 100755 include/compat/linux/compat-2.6.18.h create mode 100755 include/compat/linux/compat-2.6.19.h create mode 100755 include/compat/linux/compat-2.6.20.h create mode 100755 include/compat/linux/compat-2.6.21.h create mode 100755 include/compat/linux/compat-2.6.22.h create mode 100755 include/compat/linux/compat-2.6.23.h create mode 100755 include/compat/linux/compat-2.6.24.h create mode 100755 include/compat/linux/compat-2.6.25.h create mode 100755 include/compat/linux/compat-2.6.26.h create mode 100755 include/compat/linux/compat-2.6.27.h create mode 100755 include/compat/linux/compat-2.6.28.h create mode 100755 include/compat/linux/compat-2.6.29.h create mode 100755 include/compat/linux/compat-2.6.30.h create mode 100755 include/compat/linux/compat-2.6.31.h create mode 100755 include/compat/linux/compat-2.6.32.h create mode 100755 include/compat/linux/compat-2.6.33.h create mode 100755 include/compat/linux/compat-2.6.34.h create mode 100755 include/compat/linux/compat-2.6.35.h create mode 100755 include/compat/linux/compat-2.6.36.h create mode 100755 include/compat/linux/compat-2.6.37.h create mode 100755 include/compat/linux/compat-2.6.38.h create mode 100755 include/compat/linux/compat-2.6.39.h create mode 100755 include/compat/linux/compat-2.6.h create mode 100755 include/compat/linux/compat-3.0.h create mode 100755 include/compat/linux/compat-3.1.h create mode 100755 include/compat/linux/compat-3.2.h create mode 100755 include/compat/linux/compat-3.3.h create mode 100755 include/compat/linux/compat_autoconf.h create mode 100755 include/compat/linux/cordic.h create mode 100755 include/compat/linux/crc8.h create mode 100755 include/compat/linux/eeprom_93cx6.h create mode 100755 include/compat/linux/export.h create mode 100755 include/compat/linux/ieee80211.h create mode 100755 include/compat/linux/kfifo.h create mode 100755 include/compat/linux/math64.h create mode 100755 include/compat/linux/nl80211.h create mode 100755 include/compat/linux/of.h create mode 100755 include/compat/linux/pci-aspm.h create mode 100755 include/compat/linux/pci_ids.h create mode 100755 include/compat/linux/pm_qos.h create mode 100755 include/compat/linux/pm_qos_params.h create mode 100755 include/compat/linux/pm_runtime.h create mode 100755 include/compat/linux/printk.h create mode 100755 include/compat/linux/rfkill.h create mode 100755 include/compat/linux/rfkill_backport.h create mode 100755 include/compat/linux/semaphore.h create mode 100755 include/compat/linux/spi/libertas_spi.h create mode 100755 include/compat/linux/ssb/ssb.h create mode 100755 include/compat/linux/ssb/ssb_driver_chipcommon.h create mode 100755 include/compat/linux/ssb/ssb_driver_extif.h create mode 100755 include/compat/linux/ssb/ssb_driver_gige.h create mode 100755 include/compat/linux/ssb/ssb_driver_mips.h create mode 100755 include/compat/linux/ssb/ssb_driver_pci.h create mode 100755 include/compat/linux/ssb/ssb_embedded.h create mode 100755 include/compat/linux/ssb/ssb_regs.h create mode 100755 include/compat/linux/tracepoint.h create mode 100755 include/compat/linux/unaligned/access_ok.h create mode 100755 include/compat/linux/unaligned/be_byteshift.h create mode 100755 include/compat/linux/unaligned/be_memmove.h create mode 100755 include/compat/linux/unaligned/be_struct.h create mode 100755 include/compat/linux/unaligned/generic.h create mode 100755 include/compat/linux/unaligned/le_byteshift.h create mode 100755 include/compat/linux/unaligned/le_memmove.h create mode 100755 include/compat/linux/unaligned/le_struct.h create mode 100755 include/compat/linux/unaligned/memmove.h create mode 100755 include/compat/linux/unaligned/packed_struct.h create mode 100755 include/compat/linux/usb/rndis_host.h create mode 100755 include/compat/linux/usb/usbnet.h create mode 100755 include/compat/linux/version.h create mode 100755 include/compat/linux/wakelock.h create mode 100755 include/compat/linux/wireless.h create mode 100755 include/compat/linux/wl12xx.h create mode 100755 include/compat/net/bluetooth/bluetooth.h create mode 100755 include/compat/net/bluetooth/hci.h create mode 100755 include/compat/net/bluetooth/hci_core.h create mode 100755 include/compat/net/bluetooth/l2cap.h create mode 100755 include/compat/net/bluetooth/mgmt.h create mode 100755 include/compat/net/bluetooth/rfcomm.h create mode 100755 include/compat/net/bluetooth/smp.h create mode 100755 include/compat/net/cfg80211-wext.h create mode 100755 include/compat/net/cfg80211.h create mode 100755 include/compat/net/ieee80211_radiotap.h create mode 100755 include/compat/net/lib80211.h create mode 100755 include/compat/net/mac80211.h create mode 100755 include/compat/net/net_namespace.h create mode 100755 include/compat/net/regulatory.h (limited to 'include/compat') diff --git a/include/compat/linux/ath9k_platform.h b/include/compat/linux/ath9k_platform.h new file mode 100755 index 0000000..6e3f54f --- /dev/null +++ b/include/compat/linux/ath9k_platform.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos + * Copyright (c) 2009 Imre Kaloz + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH9K_PLATFORM_H +#define _LINUX_ATH9K_PLATFORM_H + +#define ATH9K_PLAT_EEP_MAX_WORDS 2048 + +struct ath9k_platform_data { + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; + u8 *macaddr; + + int led_pin; + u32 gpio_mask; + u32 gpio_val; + + bool is_clk_25mhz; + int (*get_mac_revision)(void); + int (*external_reset)(void); +}; + +#endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/include/compat/linux/atomic.h b/include/compat/linux/atomic.h new file mode 100755 index 0000000..378b748 --- /dev/null +++ b/include/compat/linux/atomic.h @@ -0,0 +1,46 @@ +#ifndef _COMPAT_LINUX_ATOMIC_H +#define _COMPAT_LINUX_ATOMIC_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36)) +#include_next +#else + +#include + +/** + * atomic_inc_not_zero_hint - increment if not null + * @v: pointer of type atomic_t + * @hint: probable value of the atomic before the increment + * + * This version of atomic_inc_not_zero() gives a hint of probable + * value of the atomic. This helps processor to not read the memory + * before doing the atomic read/modify/write cycle, lowering + * number of bus transactions on some arches. + * + * Returns: 0 if increment was not done, 1 otherwise. + */ +#ifndef atomic_inc_not_zero_hint +static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint) +{ + int val, c = hint; + + /* sanity test, should be removed by compiler if hint is a constant */ + if (!hint) + return atomic_inc_not_zero(v); + + do { + val = atomic_cmpxchg(v, c, c + 1); + if (val == c) + return 1; + c = val; + } while (c); + + return 0; +} +#endif + +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36)) */ + +#endif /* _COMPAT_LINUX_ATOMIC_H */ diff --git a/include/compat/linux/average.h b/include/compat/linux/average.h new file mode 100755 index 0000000..ece86ca --- /dev/null +++ b/include/compat/linux/average.h @@ -0,0 +1,5 @@ +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,37)) +#include_next +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,37)) */ diff --git a/include/compat/linux/bcma/bcma.h b/include/compat/linux/bcma/bcma.h new file mode 100755 index 0000000..4d4b59d --- /dev/null +++ b/include/compat/linux/bcma/bcma.h @@ -0,0 +1,277 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + +#include +#include + +#include +#include +#include +#include /* SPROM sharing */ + +#include "bcma_regs.h" + +struct bcma_device; +struct bcma_bus; + +enum bcma_hosttype { + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, + BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { + u16 id; + u8 rev; + u8 pkg; +}; + +enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, +}; + +struct bcma_host_ops { + u8 (*read8)(struct bcma_device *core, u16 offset); + u16 (*read16)(struct bcma_device *core, u16 offset); + u32 (*read32)(struct bcma_device *core, u16 offset); + void (*write8)(struct bcma_device *core, u16 offset, u8 value); + void (*write16)(struct bcma_device *core, u16 offset, u16 value); + void (*write32)(struct bcma_device *core, u16 offset, u32 value); +#ifdef CONFIG_BCMA_BLOCKIO + void (*block_read)(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif + /* Agent ops */ + u32 (*aread32)(struct bcma_device *core, u16 offset); + void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); +}; + +/* Core manufacturers */ +#define BCMA_MANUF_ARM 0x43B +#define BCMA_MANUF_MIPS 0x4A7 +#define BCMA_MANUF_BCM 0x4BF + +/* Core class values. */ +#define BCMA_CL_SIM 0x0 +#define BCMA_CL_EROM 0x1 +#define BCMA_CL_CORESIGHT 0x9 +#define BCMA_CL_VERIF 0xB +#define BCMA_CL_OPTIMO 0xD +#define BCMA_CL_GEN 0xE +#define BCMA_CL_PRIMECELL 0xF + +/* Core-ID values. */ +#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_INVALID 0x700 +#define BCMA_CORE_CHIPCOMMON 0x800 +#define BCMA_CORE_ILINE20 0x801 +#define BCMA_CORE_SRAM 0x802 +#define BCMA_CORE_SDRAM 0x803 +#define BCMA_CORE_PCI 0x804 +#define BCMA_CORE_MIPS 0x805 +#define BCMA_CORE_ETHERNET 0x806 +#define BCMA_CORE_V90 0x807 +#define BCMA_CORE_USB11_HOSTDEV 0x808 +#define BCMA_CORE_ADSL 0x809 +#define BCMA_CORE_ILINE100 0x80A +#define BCMA_CORE_IPSEC 0x80B +#define BCMA_CORE_UTOPIA 0x80C +#define BCMA_CORE_PCMCIA 0x80D +#define BCMA_CORE_INTERNAL_MEM 0x80E +#define BCMA_CORE_MEMC_SDRAM 0x80F +#define BCMA_CORE_OFDM 0x810 +#define BCMA_CORE_EXTIF 0x811 +#define BCMA_CORE_80211 0x812 +#define BCMA_CORE_PHY_A 0x813 +#define BCMA_CORE_PHY_B 0x814 +#define BCMA_CORE_PHY_G 0x815 +#define BCMA_CORE_MIPS_3302 0x816 +#define BCMA_CORE_USB11_HOST 0x817 +#define BCMA_CORE_USB11_DEV 0x818 +#define BCMA_CORE_USB20_HOST 0x819 +#define BCMA_CORE_USB20_DEV 0x81A +#define BCMA_CORE_SDIO_HOST 0x81B +#define BCMA_CORE_ROBOSWITCH 0x81C +#define BCMA_CORE_PARA_ATA 0x81D +#define BCMA_CORE_SATA_XORDMA 0x81E +#define BCMA_CORE_ETHERNET_GBIT 0x81F +#define BCMA_CORE_PCIE 0x820 +#define BCMA_CORE_PHY_N 0x821 +#define BCMA_CORE_SRAM_CTL 0x822 +#define BCMA_CORE_MINI_MACPHY 0x823 +#define BCMA_CORE_ARM_1176 0x824 +#define BCMA_CORE_ARM_7TDMI 0x825 +#define BCMA_CORE_PHY_LP 0x826 +#define BCMA_CORE_PMU 0x827 +#define BCMA_CORE_PHY_SSN 0x828 +#define BCMA_CORE_SDIO_DEV 0x829 +#define BCMA_CORE_ARM_CM3 0x82A +#define BCMA_CORE_PHY_HT 0x82B +#define BCMA_CORE_MIPS_74K 0x82C +#define BCMA_CORE_MAC_GBIT 0x82D +#define BCMA_CORE_DDR12_MEM_CTL 0x82E +#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */ +#define BCMA_CORE_OCP_OCP_BRIDGE 0x830 +#define BCMA_CORE_SHARED_COMMON 0x831 +#define BCMA_CORE_OCP_AHB_BRIDGE 0x832 +#define BCMA_CORE_SPI_HOST 0x833 +#define BCMA_CORE_I2S 0x834 +#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ +#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_DEFAULT 0xFFF + +#define BCMA_MAX_NR_CORES 16 + +struct bcma_device { + struct bcma_bus *bus; + struct bcma_device_id id; + + struct device dev; + struct device *dma_dev; + + unsigned int irq; + bool dev_registered; + + u8 core_index; + + u32 addr; + u32 wrap; + + void __iomem *io_addr; + void __iomem *io_wrap; + + void *drvdata; + struct list_head list; +}; + +static inline void *bcma_get_drvdata(struct bcma_device *core) +{ + return core->drvdata; +} +static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata) +{ + core->drvdata = drvdata; +} + +struct bcma_driver { + const char *name; + const struct bcma_device_id *id_table; + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); + int (*suspend)(struct bcma_device *dev, pm_message_t state); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + + struct device_driver drv; +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +#define bcma_driver_register(drv) \ + __bcma_driver_register(drv, THIS_MODULE) + +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct bcma_host_ops *ops; + + enum bcma_hosttype hosttype; + union { + /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */ + struct pci_dev *host_pci; + /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ + struct sdio_func *host_sdio; + }; + + struct bcma_chipinfo chipinfo; + + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; + u8 init_done:1; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; + struct bcma_drv_mips drv_mips; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + +extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} +extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} +extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} +extern inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} +extern inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} +extern inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO +extern inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} +extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif +extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} +extern inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + +#define bcma_mask32(cc, offset, mask) \ + bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) +#define bcma_set32(cc, offset, set) \ + bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) +#define bcma_maskset32(cc, offset, mask, set) \ + bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); +extern void bcma_core_set_clockmode(struct bcma_device *core, + enum bcma_clkmode clkmode); +extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, + bool on); +#define BCMA_DMA_TRANSLATION_MASK 0xC0000000 +#define BCMA_DMA_TRANSLATION_NONE 0x00000000 +#define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */ +#define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */ +extern u32 bcma_core_dma_translation(struct bcma_device *core); + +#endif /* LINUX_BCMA_H_ */ diff --git a/include/compat/linux/bcma/bcma_driver_chipcommon.h b/include/compat/linux/bcma/bcma_driver_chipcommon.h new file mode 100755 index 0000000..1526d96 --- /dev/null +++ b/include/compat/linux/bcma/bcma_driver_chipcommon.h @@ -0,0 +1,390 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + +/** ChipCommon core registers. **/ +#define BCMA_CC_ID 0x0000 +#define BCMA_CC_ID_ID 0x0000FFFF +#define BCMA_CC_ID_ID_SHIFT 0 +#define BCMA_CC_ID_REV 0x000F0000 +#define BCMA_CC_ID_REV_SHIFT 16 +#define BCMA_CC_ID_PKG 0x00F00000 +#define BCMA_CC_ID_PKG_SHIFT 20 +#define BCMA_CC_ID_NRCORES 0x0F000000 +#define BCMA_CC_ID_NRCORES_SHIFT 24 +#define BCMA_CC_ID_TYPE 0xF0000000 +#define BCMA_CC_ID_TYPE_SHIFT 28 +#define BCMA_CC_CAP 0x0004 /* Capabilities */ +#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ +#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NFLASH 0x00000200 +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 +#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ +#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ +#define BCMA_CC_CAP_OTPS_SHIFT 19 +#define BCMA_CC_CAP_OTPS_BASE 5 +#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CORECTL 0x0008 +#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define BCMA_CC_BIST 0x000C +#define BCMA_CC_OTPS 0x0010 /* OTP status */ +#define BCMA_CC_OTPS_PROGFAIL 0x80000000 +#define BCMA_CC_OTPS_PROTECT 0x00000007 +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +#define BCMA_CC_OTPC_PRW_SHIFT 8 +#define BCMA_CC_OTPC_MAXFAIL 0x00000038 +#define BCMA_CC_OTPC_VSEL 0x00000006 +#define BCMA_CC_OTPC_SELVL 0x00000001 +#define BCMA_CC_OTPP 0x0018 /* OTP prog */ +#define BCMA_CC_OTPP_COL 0x000000FF +#define BCMA_CC_OTPP_ROW 0x0000FF00 +#define BCMA_CC_OTPP_ROW_SHIFT 8 +#define BCMA_CC_OTPP_READERR 0x10000000 +#define BCMA_CC_OTPP_VALUE 0x20000000 +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 +#define BCMA_CC_JCMD_PAUSE 0x40000000 +#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 +#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD0_ACC_DR 0x00001000 +#define BCMA_CC_JCMD0_ACC_IR 0x00002000 +#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 +#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 +#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 +#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 +#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD_ACC_DR 0x00010000 +#define BCMA_CC_JCMD_ACC_IR 0x00020000 +#define BCMA_CC_JCMD_ACC_RESET 0x00030000 +#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 +#define BCMA_CC_JCMD_ACC_PDR 0x00050000 +#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 +#define BCMA_CC_JCMD_IRW_SHIFT 8 +#define BCMA_CC_JCMD_DRW_MASK 0x0000003F +#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ +#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ +#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ +#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ +#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ +#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ +#define BCMA_CC_FLASHCTL 0x0040 +#define BCMA_CC_FLASHCTL_START 0x80000000 +#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +#define BCMA_CC_FLASHADDR 0x0044 +#define BCMA_CC_FLASHDATA 0x0048 +#define BCMA_CC_BCAST_ADDR 0x0050 +#define BCMA_CC_BCAST_DATA 0x0054 +#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ +#define BCMA_CC_GPIOIN 0x0060 +#define BCMA_CC_GPIOOUT 0x0064 +#define BCMA_CC_GPIOOUTEN 0x0068 +#define BCMA_CC_GPIOCTL 0x006C +#define BCMA_CC_GPIOPOL 0x0070 +#define BCMA_CC_GPIOIRQ 0x0074 +#define BCMA_CC_WATCHDOG 0x0080 +#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF +#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 +#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 +#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 +#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define BCMA_CC_CLOCK_N 0x0090 +#define BCMA_CC_CLOCK_SB 0x0094 +#define BCMA_CC_CLOCK_PCI 0x0098 +#define BCMA_CC_CLOCK_M2 0x009C +#define BCMA_CC_CLOCK_MIPS 0x00A0 +#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 +#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 +#define BCMA_CC_CLKDIV_OTP 0x000F0000 +#define BCMA_CC_CLKDIV_OTP_SHIFT 16 +#define BCMA_CC_CLKDIV_JTAG 0x00000F00 +#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 +#define BCMA_CC_CLKDIV_UART 0x000000FF +#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ +#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define BCMA_CC_EROM 0x00FC +#define BCMA_CC_PCMCIA_CFG 0x0100 +#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 +#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 +#define BCMA_CC_PCMCIA_IOWAIT 0x010C +#define BCMA_CC_IDE_CFG 0x0110 +#define BCMA_CC_IDE_MEMWAIT 0x0114 +#define BCMA_CC_IDE_ATTRWAIT 0x0118 +#define BCMA_CC_IDE_IOWAIT 0x011C +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 +#define BCMA_CC_UART0_IMR 0x0304 +#define BCMA_CC_UART0_FCR 0x0308 +#define BCMA_CC_UART0_LCR 0x030C +#define BCMA_CC_UART0_MCR 0x0310 +#define BCMA_CC_UART0_LSR 0x0314 +#define BCMA_CC_UART0_MSR 0x0318 +#define BCMA_CC_UART0_SCRATCH 0x031C +#define BCMA_CC_UART1_DATA 0x0400 +#define BCMA_CC_UART1_IMR 0x0404 +#define BCMA_CC_UART1_FCR 0x0408 +#define BCMA_CC_UART1_LCR 0x040C +#define BCMA_CC_UART1_MCR 0x0410 +#define BCMA_CC_UART1_LSR 0x0414 +#define BCMA_CC_UART1_MSR 0x0418 +#define BCMA_CC_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 +#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ +#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ +#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ +#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define BCMA_CC_CHIPCTL_ADDR 0x0650 +#define BCMA_CC_CHIPCTL_DATA 0x0654 +#define BCMA_CC_REGCTL_ADDR 0x0658 +#define BCMA_CC_REGCTL_DATA 0x065C +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 + +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f + +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +struct bcma_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; + u8 setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ +}; + +/* Register access */ +#define bcma_cc_read32(cc, offset) \ + bcma_read32((cc)->core, offset) +#define bcma_cc_write32(cc, offset, val) \ + bcma_write32((cc)->core, offset, val) + +#define bcma_cc_mask32(cc, offset, mask) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) +#define bcma_cc_set32(cc, offset, set) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) +#define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); + +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); + +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + +extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, + u32 mask, u32 set); +extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/compat/linux/bcma/bcma_driver_mips.h b/include/compat/linux/bcma/bcma_driver_mips.h new file mode 100755 index 0000000..c004364 --- /dev/null +++ b/include/compat/linux/bcma/bcma_driver_mips.h @@ -0,0 +1,51 @@ +#ifndef LINUX_BCMA_DRIVER_MIPS_H_ +#define LINUX_BCMA_DRIVER_MIPS_H_ + +#define BCMA_MIPS_IPSFLAG 0x0F08 +/* which sbflags get routed to mips interrupt 1 */ +#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F +#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 +/* which sbflags get routed to mips interrupt 2 */ +#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 +#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 +/* which sbflags get routed to mips interrupt 3 */ +#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 +#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 +/* which sbflags get routed to mips interrupt 4 */ +#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 +#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 + +/* MIPS 74K core registers */ +#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 +#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 +#define BCMA_MIPS_MIPS74K_BIST 0x000C +#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 +#define BCMA_MIPS_MIPS74K_INTMASK(int) \ + ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) +#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C +#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 +#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 +#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 +#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + +#define BCMA_MIPS_OOBSELOUTA30 0x100 + +struct bcma_device; + +struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + unsigned int assigned_irqs; +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +#else +static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +#endif + +extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/include/compat/linux/bcma/bcma_driver_pci.h b/include/compat/linux/bcma/bcma_driver_pci.h new file mode 100755 index 0000000..3871b66 --- /dev/null +++ b/include/compat/linux/bcma/bcma_driver_pci.h @@ -0,0 +1,91 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + +#include + +struct pci_dev; + +/** PCI core registers. **/ +#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ +#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ +#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ +#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF +#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ +#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ + +/* SBtoPCIx */ +#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 +#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 +#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 +#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/compat/linux/bcma/bcma_regs.h b/include/compat/linux/bcma/bcma_regs.h new file mode 100755 index 0000000..9faae2a --- /dev/null +++ b/include/compat/linux/bcma/bcma_regs.h @@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + +/* Some single registers are shared between many cores */ +/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */ +#define BCMA_CLKCTLST 0x01E0 /* Clock control and status */ +#define BCMA_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define BCMA_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define BCMA_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ +#define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ +#define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ +#define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ +#define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ +#define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ +/* Is there any BCM4328 on BCMA bus? */ +#define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ +#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ + +/* Agent registers (common for every core) */ +#define BCMA_IOCTL 0x0408 /* IO control */ +#define BCMA_IOCTL_CLK 0x0001 +#define BCMA_IOCTL_FGC 0x0002 +#define BCMA_IOCTL_CORE_BITS 0x3FFC +#define BCMA_IOCTL_PME_EN 0x4000 +#define BCMA_IOCTL_BIST_EN 0x8000 +#define BCMA_IOST 0x0500 /* IO status */ +#define BCMA_IOST_CORE_BITS 0x0FFF +#define BCMA_IOST_DMA64 0x1000 +#define BCMA_IOST_GATED_CLK 0x2000 +#define BCMA_IOST_BIST_ERROR 0x4000 +#define BCMA_IOST_BIST_DONE 0x8000 +#define BCMA_RESET_CTL 0x0800 +#define BCMA_RESET_CTL_RESET 0x0001 + +/* BCMA PCI config space registers. */ +#define BCMA_PCI_PMCSR 0x44 +#define BCMA_PCI_PE 0x100 +#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ +#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ +#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define BCMA_PCI_BAR0_WIN2 0xAC +#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + +#endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/compat/linux/bcma/bcma_soc.h b/include/compat/linux/bcma/bcma_soc.h new file mode 100755 index 0000000..4203c55 --- /dev/null +++ b/include/compat/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ +#ifndef LINUX_BCMA_SOC_H_ +#define LINUX_BCMA_SOC_H_ + +#include + +struct bcma_soc { + struct bcma_bus bus; + struct bcma_device core_cc; + struct bcma_device core_mips; +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc); + +int bcma_bus_register(struct bcma_bus *bus); + +#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/include/compat/linux/bitops.h b/include/compat/linux/bitops.h new file mode 100755 index 0000000..aa76af1 --- /dev/null +++ b/include/compat/linux/bitops.h @@ -0,0 +1,211 @@ +#ifndef _LINUX_BITOPS_H +#define _LINUX_BITOPS_H +#include + +#ifdef __KERNEL__ +#define BIT(nr) (1UL << (nr)) +#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BIT_WORD(nr) ((nr) / BITS_PER_LONG) +#define BITS_PER_BYTE 8 +#ifndef BITS_TO_LONGS /* Older kernels define this already */ +#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) +#endif +#endif + +extern unsigned int __sw_hweight8(unsigned int w); +extern unsigned int __sw_hweight16(unsigned int w); +extern unsigned int __sw_hweight32(unsigned int w); +extern unsigned long __sw_hweight64(__u64 w); + +/* + * Include this here because some architectures need generic_ffs/fls in + * scope + */ +#include + +#define for_each_set_bit(bit, addr, size) \ + for ((bit) = find_first_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_bit((addr), (size), (bit) + 1)) + +static __inline__ int get_bitmask_order(unsigned int count) +{ + int order; + + order = fls(count); + return order; /* We could be slightly more clever with -1 here... */ +} + +static __inline__ int get_count_order(unsigned int count) +{ + int order; + + order = fls(count) - 1; + if (count & (count - 1)) + order++; + return order; +} + +static inline unsigned long hweight_long(unsigned long w) +{ + return sizeof(w) == 4 ? hweight32(w) : hweight64(w); +} + +/** + * rol32 - rotate a 32-bit value left + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u32 rol32(__u32 word, unsigned int shift) +{ + return (word << shift) | (word >> (32 - shift)); +} + +/** + * ror32 - rotate a 32-bit value right + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u32 ror32(__u32 word, unsigned int shift) +{ + return (word >> shift) | (word << (32 - shift)); +} + +/** + * rol16 - rotate a 16-bit value left + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u16 rol16(__u16 word, unsigned int shift) +{ + return (word << shift) | (word >> (16 - shift)); +} + +/** + * ror16 - rotate a 16-bit value right + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u16 ror16(__u16 word, unsigned int shift) +{ + return (word >> shift) | (word << (16 - shift)); +} + +/** + * rol8 - rotate an 8-bit value left + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u8 rol8(__u8 word, unsigned int shift) +{ + return (word << shift) | (word >> (8 - shift)); +} + +/** + * ror8 - rotate an 8-bit value right + * @word: value to rotate + * @shift: bits to roll + */ +static inline __u8 ror8(__u8 word, unsigned int shift) +{ + return (word >> shift) | (word << (8 - shift)); +} + +/** + * sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit + * @value: value to sign extend + * @index: 0 based bit index (0<=index<32) to sign bit + */ +static inline __s32 sign_extend32(__u32 value, int index) +{ + __u8 shift = 31 - index; + return (__s32)(value << shift) >> shift; +} + +static inline unsigned fls_long(unsigned long l) +{ + if (sizeof(l) == 4) + return fls(l); + return fls64(l); +} + +/** + * __ffs64 - find first set bit in a 64 bit word + * @word: The 64 bit word + * + * On 64 bit arches this is a synomyn for __ffs + * The result is not defined if no bits are set, so check that @word + * is non-zero before calling this. + */ +static inline unsigned long __ffs64(u64 word) +{ +#if BITS_PER_LONG == 32 + if (((u32)word) == 0UL) + return __ffs((u32)(word >> 32)) + 32; +#elif BITS_PER_LONG != 64 +#error BITS_PER_LONG not 32 or 64 +#endif + return __ffs((unsigned long)word); +} + +#ifdef __KERNEL__ +#ifdef CONFIG_GENERIC_FIND_FIRST_BIT + +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit number of the first set bit. + */ +extern unsigned long find_first_bit(const unsigned long *addr, + unsigned long size); + +/** + * find_first_zero_bit - find the first cleared bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit number of the first cleared bit. + */ +extern unsigned long find_first_zero_bit(const unsigned long *addr, + unsigned long size); +#endif /* CONFIG_GENERIC_FIND_FIRST_BIT */ + +#ifdef CONFIG_GENERIC_FIND_LAST_BIT +/** + * find_last_bit - find the last set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit number of the first set bit, or size. + */ +extern unsigned long find_last_bit(const unsigned long *addr, + unsigned long size); +#endif /* CONFIG_GENERIC_FIND_LAST_BIT */ + +#ifdef CONFIG_GENERIC_FIND_NEXT_BIT + +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The bitmap size in bits + */ +extern unsigned long find_next_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); + +/** + * find_next_zero_bit - find the next cleared bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The bitmap size in bits + */ + +extern unsigned long find_next_zero_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); + +#endif /* CONFIG_GENERIC_FIND_NEXT_BIT */ +#endif /* __KERNEL__ */ +#endif diff --git a/include/compat/linux/compat-2.6.14.h b/include/compat/linux/compat-2.6.14.h new file mode 100755 index 0000000..1f19f7f --- /dev/null +++ b/include/compat/linux/compat-2.6.14.h @@ -0,0 +1,13 @@ +#ifndef LINUX_26_14_COMPAT_H +#define LINUX_26_14_COMPAT_H + +#include + +/* Compat work for 2.6.14 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)) + +typedef unsigned int gfp_t; + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)) */ + +#endif /* LINUX_26_14_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.18.h b/include/compat/linux/compat-2.6.18.h new file mode 100755 index 0000000..5e0182b --- /dev/null +++ b/include/compat/linux/compat-2.6.18.h @@ -0,0 +1,13 @@ +#ifndef LINUX_26_18_COMPAT_H +#define LINUX_26_18_COMPAT_H + +#include + +/* Compat work for 2.6.18 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) + +#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) */ + +#endif /* LINUX_26_18_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.19.h b/include/compat/linux/compat-2.6.19.h new file mode 100755 index 0000000..1e648c0 --- /dev/null +++ b/include/compat/linux/compat-2.6.19.h @@ -0,0 +1,24 @@ +#ifndef LINUX_26_19_COMPAT_H +#define LINUX_26_19_COMPAT_H + +#include + +/* Compat work for 2.6.19 */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)) + +#include + +static inline int +compat_kmem_cache_destroy(struct kmem_cache *cachep) +{ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) + return kmem_cache_destroy(cachep); +#else + kmem_cache_destroy(cachep); + return 0; +#endif +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)) */ + +#endif /* LINUX_26_19_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.20.h b/include/compat/linux/compat-2.6.20.h new file mode 100755 index 0000000..14579e2 --- /dev/null +++ b/include/compat/linux/compat-2.6.20.h @@ -0,0 +1,21 @@ +#ifndef LINUX_26_20_COMPAT_H +#define LINUX_26_20_COMPAT_H + +#include + +/* Compat work for 2.6.20 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)) + +#include + +typedef void (*work_func_t)(struct work_struct *work); +typedef void (*compat_work_func_t)(void *work); +static inline void (INIT_WORK)(struct work_struct *work, work_func_t func) +{ + INIT_WORK(work, (compat_work_func_t)func, work); +} +#undef INIT_WORK + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)) */ + +#endif /* LINUX_26_20_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.21.h b/include/compat/linux/compat-2.6.21.h new file mode 100755 index 0000000..89ed6d9 --- /dev/null +++ b/include/compat/linux/compat-2.6.21.h @@ -0,0 +1,18 @@ +#ifndef LINUX_26_21_COMPAT_H +#define LINUX_26_21_COMPAT_H + +#include + +/* Compat work for 2.6.21 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) + +#include + +#define register_sysctl_table(table) \ + ({ \ + register_sysctl_table((table), 0); \ + }) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) */ + +#endif /* LINUX_26_21_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.22.h b/include/compat/linux/compat-2.6.22.h new file mode 100755 index 0000000..7ca1b18 --- /dev/null +++ b/include/compat/linux/compat-2.6.22.h @@ -0,0 +1,104 @@ +#ifndef LINUX_26_22_COMPAT_H +#define LINUX_26_22_COMPAT_H + +#include + +/* Compat work for 2.6.21 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)) + +#include +#include + +/* reuse ax25_ptr */ +#define ieee80211_ptr ax25_ptr + +#ifdef CONFIG_AX25 +#error Compat reuses the AX.25 pointer so that may not be enabled! +#endif + +static inline unsigned char *skb_mac_header(const struct sk_buff *skb) +{ + return skb->mac.raw; +} + +static inline void skb_set_mac_header(struct sk_buff *skb, int offset) +{ + skb->mac.raw = skb->data + offset; +} + +static inline void skb_reset_mac_header(struct sk_buff *skb) +{ + skb->mac.raw = skb->data; +} + +static inline void skb_reset_network_header(struct sk_buff *skb) +{ + skb->nh.raw = skb->data; +} + +static inline void skb_set_network_header(struct sk_buff *skb, int offset) +{ + skb->nh.raw = skb->data + offset; +} + +static inline void skb_set_transport_header(struct sk_buff *skb, int offset) +{ + skb->h.raw = skb->data + offset; +} + +static inline unsigned char *skb_transport_header(struct sk_buff *skb) +{ + return skb->h.raw; +} + +static inline unsigned char *skb_network_header(const struct sk_buff *skb) +{ + return skb->nh.raw; +} + +static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb) +{ + return skb->tail; +} + +static inline struct iphdr *ip_hdr(const struct sk_buff *skb) +{ + return (struct iphdr *)skb_network_header(skb); +} + +static inline void skb_copy_from_linear_data(const struct sk_buff *skb, + void *to, + const unsigned int len) +{ + memcpy(to, skb->data, len); +} + +static inline void skb_copy_from_linear_data_offset(const struct sk_buff *skb, + const int offset, void *to, + const unsigned int len) +{ + memcpy(to, skb->data + offset, len); +} + +#define __maybe_unused __attribute__((unused)) + +#define uninitialized_var(x) x = x + +/* This will lead to very weird behaviour... */ +#define NLA_BINARY NLA_STRING + +static inline int pci_set_mwi(struct pci_dev *dev) +{ + return -ENOSYS; +} + +static inline void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#define list_first_entry(ptr, type, member) \ + list_entry((ptr)->next, type, member) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)) */ + +#endif /* LINUX_26_22_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.23.h b/include/compat/linux/compat-2.6.23.h new file mode 100755 index 0000000..766d4da --- /dev/null +++ b/include/compat/linux/compat-2.6.23.h @@ -0,0 +1,136 @@ +#ifndef LINUX_26_23_COMPAT_H +#define LINUX_26_23_COMPAT_H + +#include + +/* Compat work for < 2.6.23 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) + +#include +#include +#include +#include +#include + +/* + * Tell gcc if a function is cold. The compiler will assume any path + * directly leading to the call is unlikely. + */ + +#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 3) +/* Mark functions as cold. gcc will assume any path leading to a call + * to them will be unlikely. This means a lot of manual unlikely()s + * are unnecessary now for any paths leading to the usual suspects + * like BUG(), printk(), panic() etc. [but let's keep them for now for + * older compilers] + * + * Early snapshots of gcc 4.3 don't support this and we can't detect this + * in the preprocessor, but we can live with this because they're unreleased. + * Maketime probing would be overkill here. + * + * gcc also has a __attribute__((__hot__)) to move hot functions into + * a special section, but I don't see any sense in this right now in + * the kernel context */ +#define __cold __attribute__((__cold__)) +#endif /* gcc 4.3 check */ + +#ifndef __cold +#define __cold +#endif + +/* Added as of 2.6.23 in include/linux/netdevice.h */ +#define alloc_netdev_mq(sizeof_priv, name, setup, queue) \ + alloc_netdev(sizeof_priv, name, setup) +#define NETIF_F_MULTI_QUEUE 16384 + +/* Added as of 2.6.23 on include/linux/netdevice.h */ +static inline int netif_is_multiqueue(const struct net_device *dev) +{ + return (!!(NETIF_F_MULTI_QUEUE & dev->features)); +} + +/* 2.6.23 fixed a bug in tcf_destroy_chain and the parameter changed */ +static inline void tcf_destroy_chain_compat(struct tcf_proto **fl) +{ + struct tcf_proto *tp; + + while ((tp = *fl) != NULL) { + *fl = tp->next; + tp->ops->destroy(tp); + module_put(tp->ops->owner); + kfree(tp); + } +} + +/* dev_mc_list was replaced with dev_addr_list as of 2.6.23, + * only new member added is da_synced. */ +#define dev_addr_list dev_mc_list +#define da_addr dmi_addr +#define da_addrlen dmi_addrlen +#define da_users dmi_users +#define da_gusers dmi_gusers + +/* dev_set_promiscuity() was moved to __dev_set_promiscuity() on 2.6.23 and + * dev_set_promiscuity() became a wrapper. */ +#define __dev_set_promiscuity dev_set_promiscuity + +/* Our own 2.6.22 port on compat.c */ +extern void dev_mc_unsync(struct net_device *to, struct net_device *from); +extern int dev_mc_sync(struct net_device *to, struct net_device *from); + +/* Our own 2.6.22 port on compat.c */ +extern void __dev_set_rx_mode(struct net_device *dev); + +/* Simple to add this */ +extern int cancel_delayed_work_sync(struct delayed_work *work); + +#define cancel_delayed_work_sync cancel_rearming_delayed_work + +#define debugfs_rename(a, b, c, d) 1 + +/* nl80211 requires multicast group support which is new and added on + * 2.6.23. We can't add support for it for older kernels to support it + * genl_family structure was changed. Lets just let through the + * genl_register_mc_group call. This means no multicast group suppport */ + +#define genl_register_mc_group(a, b) 0 + +/** + * struct genl_multicast_group - generic netlink multicast group + * @name: name of the multicast group, names are per-family + * @id: multicast group ID, assigned by the core, to use with + * genlmsg_multicast(). + * @list: list entry for linking + * @family: pointer to family, need not be set before registering + */ +struct genl_multicast_group +{ + struct genl_family *family; /* private */ + struct list_head list; /* private */ + char name[GENL_NAMSIZ]; + u32 id; +}; + + +/* Added as of 2.6.23 */ +int pci_try_set_mwi(struct pci_dev *dev); + +/* Added as of 2.6.23 */ +#ifdef CONFIG_PM_SLEEP +/* + * Tell the freezer that the current task should be frozen by it + */ +static inline void set_freezable(void) +{ + current->flags &= ~PF_NOFREEZE; +} + +#else +static inline void set_freezable(void) {} +#endif /* CONFIG_PM_SLEEP */ + +#else +#define tcf_destroy_chain_compat tcf_destroy_chain +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) */ + +#endif /* LINUX_26_23_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.24.h b/include/compat/linux/compat-2.6.24.h new file mode 100755 index 0000000..c49c44d --- /dev/null +++ b/include/compat/linux/compat-2.6.24.h @@ -0,0 +1,247 @@ +#ifndef LINUX_26_24_COMPAT_H +#define LINUX_26_24_COMPAT_H + +#include + +/* Compat work for 2.6.21, 2.6.22 and 2.6.23 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) + +#include +#include +#include +#include +#include +#include +#include + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) + +struct proc_dir_entry; +struct net_device; +struct net { + atomic_t count; /* To decided when the network + * namespace should be freed. + */ + atomic_t use_count; /* To track references we + * destroy on demand + */ + struct list_head list; /* list of network namespaces */ + struct work_struct work; /* work struct for freeing */ + + struct proc_dir_entry *proc_net; + struct proc_dir_entry *proc_net_stat; + struct proc_dir_entry *proc_net_root; + + struct net_device *loopback_dev; /* The loopback */ + + struct list_head dev_base_head; + struct hlist_head *dev_name_head; + struct hlist_head *dev_index_head; +}; + +#ifdef CONFIG_NET +/* Init's network namespace */ +extern struct net init_net; +#define INIT_NET_NS(net_ns) .net_ns = &init_net, +#else +#define INIT_NET_NS(net_ns) +#endif + +/* Added on 2.6.24 in include/linux/types.h by Al viro on commit 142956af */ +typedef unsigned long uintptr_t; + +/* From include/linux/net.h */ +enum sock_shutdown_cmd { + SHUT_RD = 0, + SHUT_WR = 1, + SHUT_RDWR = 2, +}; + +#if (LINUX_VERSION_CODE == KERNEL_VERSION(2,6,23)) /* Local check */ +/* Added as of 2.6.24 in include/linux/skbuff.h. + * + * Although 2.6.23 does support for CONFIG_NETDEVICES_MULTIQUEUE + * this helper was not added until 2.6.24. This implementation + * is exactly as it is on newer kernels. + * + * For older kernels we use the an internal mac80211 hack. + * For details see changes to include/net/mac80211.h through + * compat.diff and compat/mq_compat.h */ +static inline u16 skb_get_queue_mapping(struct sk_buff *skb) +{ +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + return skb->queue_mapping; +#else + return 0; +#endif +} +#endif /* Local 2.6.23 check */ + +/* On older kernels we handle this a bit differently, so we yield to that + * code for its implementation in mq_compat.h as we want to make + * use of the internal mac80211 __ieee80211_queue_stopped() which itself + * uses internal mac80211 data structure hacks. */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) /* Local check */ +/** + * netif_subqueue_stopped - test status of subqueue + * @dev: network device + * @queue_index: sub queue index + * + * Check individual transmit queue of a device with multiple transmit queues. + */ +static inline int __netif_subqueue_stopped(const struct net_device *dev, + u16 queue_index) +{ +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + return test_bit(__LINK_STATE_XOFF, + &dev->egress_subqueue[queue_index].state); +#else + return 0; +#endif +} + +/* Note: although the backport implementation for netif_subqueue_stopped + * on older kernels is identical to upstream __netif_subqueue_stopped() + * (except for a const qualifier) we implement netif_subqueue_stopped() + * as part of mac80211 as it relies on internal mac80211 structures we + * use for MQ support. We this implement it in mq_compat.h */ + +#endif /* Local 2.6.23 check */ + +/* + * Force link bug if constructor is used, can't be done compatibly + * because constructor arguments were swapped since then! + */ +extern void __incompatible_kmem_cache_create(void); + +/* 2.6.21 and 2.6.22 kmem_cache_create() takes 6 arguments */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) +#define kmem_cache_create(name, objsize, align, flags, ctor) \ + ({ \ + if (ctor) __incompatible_kmem_cache_create(); \ + kmem_cache_create((name), (objsize), (align), \ + (flags), NULL, NULL); \ + }) +#endif + +/* 2.6.23 kmem_cache_create() takes 5 arguments */ +#if (LINUX_VERSION_CODE == KERNEL_VERSION(2,6,23)) +#define kmem_cache_create(name, objsize, align, flags, ctor) \ + ({ \ + if (ctor) __incompatible_kmem_cache_create(); \ + kmem_cache_create((name), (objsize), (align), \ + (flags), NULL); \ + }) +#endif + +/* From include/linux/mod_devicetable.h */ + +/* SSB core, see drivers/ssb/ */ +#ifndef SSB_DEVICE +struct ssb_device_id { + __u16 vendor; + __u16 coreid; + __u8 revision; +}; +#define SSB_DEVICE(_vendor, _coreid, _revision) \ + { .vendor = _vendor, .coreid = _coreid, .revision = _revision, } +#define SSB_DEVTABLE_END \ + { 0, }, + +#define SSB_ANY_VENDOR 0xFFFF +#define SSB_ANY_ID 0xFFFF +#define SSB_ANY_REV 0xFF +#endif + + +/* Namespace stuff, introduced on 2.6.24 */ +#define dev_get_by_index(a, b) dev_get_by_index(b) +#define __dev_get_by_index(a, b) __dev_get_by_index(b) + +extern int eth_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, void *daddr, + void *saddr, unsigned len); +extern int eth_rebuild_header(struct sk_buff *skb); +extern void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev, + unsigned char * haddr); +extern int eth_header_cache(struct neighbour *neigh, + struct hh_cache *hh); + +/* This structure is simply not present on 2.6.22 and 2.6.23 */ +struct header_ops { + int (*create) (struct sk_buff *skb, struct net_device *dev, + unsigned short type, void *daddr, + void *saddr, unsigned len); + int (*parse)(const struct sk_buff *skb, unsigned char *haddr); + int (*rebuild)(struct sk_buff *skb); + #define HAVE_HEADER_CACHE + int (*cache)(struct neighbour *neigh, struct hh_cache *hh); + void (*cache_update)(struct hh_cache *hh, + struct net_device *dev, + unsigned char *haddr); +}; + +/* net/ieee80211/ieee80211_crypt_tkip uses sg_init_table. This was added on + * 2.6.24. CONFIG_DEBUG_SG was added in 2.6.24 as well, so lets just ignore + * the debug stuff. Note that adding this required changes to the struct + * scatterlist on include/asm/scatterlist*, so the right way to port this + * is to simply ignore the new structure changes and zero the scatterlist + * array. We lave the kdoc intact for reference. + */ + +/** + * sg_mark_end - Mark the end of the scatterlist + * @sg: SG entryScatterlist + * + * Description: + * Marks the passed in sg entry as the termination point for the sg + * table. A call to sg_next() on this entry will return NULL. + * + **/ +static inline void sg_mark_end(struct scatterlist *sg) +{ +#ifdef CONFIG_DEBUG_SG + BUG_ON(sg->sg_magic != SG_MAGIC); +#endif +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) + /* + * Set termination bit, clear potential chain bit + */ + sg->page_link |= 0x02; + sg->page_link &= ~0x01; +#endif +} + +/** + * sg_init_table - Initialize SG table + * @sgl: The SG table + * @nents: Number of entries in table + * + * Notes: + * If this is part of a chained sg table, sg_mark_end() should be + * used only on the last table part. + * + **/ +static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents) +{ + memset(sgl, 0, sizeof(*sgl) * nents); +} + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) */ + +#endif /* LINUX_26_24_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.25.h b/include/compat/linux/compat-2.6.25.h new file mode 100755 index 0000000..ad3220a --- /dev/null +++ b/include/compat/linux/compat-2.6.25.h @@ -0,0 +1,179 @@ +#ifndef LINUX_26_25_COMPAT_H +#define LINUX_26_25_COMPAT_H + +#include + +/* Compat work for 2.6.24 */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The macro below uses a const upstream, this differs */ + +/** + * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table + * @_table: device table name + * + * This macro is used to create a struct pci_device_id array (a device table) + * in a generic manner. + */ +#define DEFINE_PCI_DEVICE_TABLE(_table) \ + const struct pci_device_id _table[] __devinitdata + +/* + * Backport work for QoS dependencies (kernel/pm_qos_params.c) + * pm-qos stuff written by mark gross mgross@linux.intel.com. + * + * ipw2100 now makes use of: + * + * pm_qos_add_requirement(), + * pm_qos_update_requirement() and + * pm_qos_remove_requirement() from it + * + * mac80211 uses the network latency to determine if to enable or not + * dynamic PS. mac80211 also and registers a notifier for when + * the latency changes. Since older kernels do no thave pm-qos stuff + * we just implement it completley here and register it upon cfg80211 + * init. I haven't tested ipw2100 on 2.6.24 though. + * + * This pm-qos implementation is copied verbatim from the kernel + * written by mark gross mgross@linux.intel.com. You don't have + * to do anythinig to use pm-qos except use the same exported + * routines as used in newer kernels. The compat_pm_qos_power_init() + * defned below is used by the compat module to initialize pm-qos. + */ +int compat_pm_qos_power_init(void); +int compat_pm_qos_power_deinit(void); + +/* + * 2.6.25 adds PM_EVENT_HIBERNATE as well here but + * we don't have this on <= 2.6.23) + */ +#ifndef PM_EVENT_SLEEP /* some distribution have mucked with their own headers to add this.. */ +#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND) +#endif + +/* Although we don't care about wimax this is needed for rfkill input stuff */ +#define KEY_WIMAX 246 + +/* Although pm_qos stuff is not implemented on <= 2.6.24 lets keep the define */ +#define PM_QOS_DEFAULT_VALUE -1 + +#define __WARN(foo) dump_stack() + +#define dev_emerg(dev, format, arg...) \ + dev_printk(KERN_EMERG , dev , format , ## arg) +#define dev_alert(dev, format, arg...) \ + dev_printk(KERN_ALERT , dev , format , ## arg) +#define dev_crit(dev, format, arg...) \ + dev_printk(KERN_CRIT , dev , format , ## arg) + +extern int __dev_addr_sync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count); +extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count); + +#define seq_file_net &init_net; + +enum nf_inet_hooks { + NF_INET_PRE_ROUTING = 0, + NF_INET_LOCAL_IN = 1, + NF_INET_FORWARD = 2, + NF_INET_LOCAL_OUT = 3, + NF_INET_POST_ROUTING = 4, + NF_INET_NUMHOOKS = 5 +}; + +/* The patch: + * commit 8b5f6883683c91ad7e1af32b7ceeb604d68e2865 + * Author: Marcin Slusarz + * Date: Fri Feb 8 04:20:12 2008 -0800 + * + * byteorder: move le32_add_cpu & friends from OCFS2 to core + * + * moves le*_add_cpu and be*_add_cpu functions from OCFS2 to core + * header (1st) and converted some existing code to it. We port + * it here as later kernels will most likely use it. + */ +static inline void le16_add_cpu(__le16 *var, u16 val) +{ + *var = cpu_to_le16(le16_to_cpu(*var) + val); +} + +static inline void le32_add_cpu(__le32 *var, u32 val) +{ + *var = cpu_to_le32(le32_to_cpu(*var) + val); +} + +static inline void le64_add_cpu(__le64 *var, u64 val) +{ + *var = cpu_to_le64(le64_to_cpu(*var) + val); +} + +static inline void be16_add_cpu(__be16 *var, u16 val) +{ + u16 v = be16_to_cpu(*var); + *var = cpu_to_be16(v + val); +} + +static inline void be32_add_cpu(__be32 *var, u32 val) +{ + u32 v = be32_to_cpu(*var); + *var = cpu_to_be32(v + val); +} + +static inline void be64_add_cpu(__be64 *var, u64 val) +{ + u64 v = be64_to_cpu(*var); + *var = cpu_to_be64(v + val); +} + +/* 2.6.25 changes hwrng_unregister()'s behaviour by supporting + * suspend of its parent device (the misc device, which is itself the + * hardware random number generator). It does this by passing a parameter to + * unregister_miscdev() which is not supported in older kernels. The suspend + * parameter allows us to enable access to the device's hardware + * number generator during suspend. As far as wireless is concerned this means + * if a driver goes to suspend it you won't have the HNR available in + * older kernels. */ +static inline void __hwrng_unregister(struct hwrng *rng, bool suspended) +{ + hwrng_unregister(rng); +} + +static inline void led_classdev_unregister_suspended(struct led_classdev *lcd) +{ + led_classdev_unregister(lcd); +} + +/** + * The following things are out of ./include/linux/kernel.h + * The new iwlwifi driver is using them. + */ +extern int strict_strtoul(const char *, unsigned int, unsigned long *); +extern int strict_strtol(const char *, unsigned int, long *); + +#else +/* + * Kernels >= 2.6.25 have pm-qos and its initialized as part of + * the bootup process + */ +static inline int compat_pm_qos_power_init(void) +{ + return 0; +} + +static inline int compat_pm_qos_power_deinit(void) +{ + return 0; +} +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)) */ + +#endif /* LINUX_26_25_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.26.h b/include/compat/linux/compat-2.6.26.h new file mode 100755 index 0000000..177792a --- /dev/null +++ b/include/compat/linux/compat-2.6.26.h @@ -0,0 +1,455 @@ +#ifndef LINUX_26_26_COMPAT_H +#define LINUX_26_26_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) + +#include +#include +#include +#include +#include +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) +#include +#endif +#include +#include +#include + +/* These jiffie helpers added as of 2.6.26 */ + +/* + * These four macros compare jiffies and 'a' for convenience. + */ + +/* time_is_before_jiffies(a) return true if a is before jiffies */ +#define time_is_before_jiffies(a) time_after(jiffies, a) + +/* time_is_after_jiffies(a) return true if a is after jiffies */ +#define time_is_after_jiffies(a) time_before(jiffies, a) + +/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/ +#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a) + +/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/ +#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a) + +/* This comes from include/linux/input.h */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ + +/* From kernel.h */ +#define USHORT_MAX ((u16)(~0U)) +#define SHORT_MAX ((s16)(USHORT_MAX>>1)) +#define SHORT_MIN (-SHORT_MAX - 1) + +extern int dev_set_name(struct device *dev, const char *name, ...) + __attribute__((format(printf, 2, 3))); + +/** + * clamp - return a value clamped to a given range with strict typechecking + * @val: current value + * @min: minimum allowable value + * @max: maximum allowable value + * + * This macro does strict typechecking of min/max to make sure they are of the + * same type as val. See the unnecessary pointer comparisons. + */ +#define clamp(val, min, max) ({ \ + typeof(val) __val = (val); \ + typeof(min) __min = (min); \ + typeof(max) __max = (max); \ + (void) (&__val == &__min); \ + (void) (&__val == &__max); \ + __val = __val < __min ? __min: __val; \ + __val > __max ? __max: __val; }) + +/** + * clamp_t - return a value clamped to a given range using a given type + * @type: the type of variable to use + * @val: current value + * @min: minimum allowable value + * @max: maximum allowable value + * + * This macro does no typechecking and uses temporary variables of type + * 'type' to make all the comparisons. + */ +#define clamp_t(type, val, min, max) ({ \ + type __val = (val); \ + type __min = (min); \ + type __max = (max); \ + __val = __val < __min ? __min: __val; \ + __val > __max ? __max: __val; }) + + +/* from include/linux/device.h */ +/* device_create_drvdata() is new */ +extern struct device *device_create_drvdata(struct class *cls, + struct device *parent, + dev_t devt, + void *drvdata, + const char *fmt, ...) +__attribute__((format(printf, 5, 6))); + +/* This is from include/linux/list.h */ + +/** + * list_is_singular - tests whether a list has just one entry. + * @head: the list to test. + */ +static inline int list_is_singular(const struct list_head *head) +{ + return !list_empty(head) && (head->next == head->prev); +} + +/* This is from include/linux/device.h, which was added as of 2.6.26 */ +static inline const char *dev_name(struct device *dev) +{ + /* will be changed into kobject_name(&dev->kobj) in the near future */ + return dev->bus_id; +} + +/* This is from include/linux/kernel.h, which was added as of 2.6.26 */ + +/** + * clamp_val - return a value clamped to a given range using val's type + * @val: current value + * @min: minimum allowable value + * @max: maximum allowable value + * + * This macro does no typechecking and uses temporary variables of whatever + * type the input argument 'val' is. This is useful when val is an unsigned + * type and min and max are literals that will otherwise be assigned a signed + * integer type. + */ + +#define clamp_val(val, min, max) ({ \ + typeof(val) __val = (val); \ + typeof(val) __min = (min); \ + typeof(val) __max = (max); \ + __val = __val < __min ? __min: __val; \ + __val > __max ? __max: __val; }) + +/* This comes from include/net/net_namespace.h */ + +#ifdef CONFIG_NET_NS +static inline +int net_eq(const struct net *net1, const struct net *net2) +{ + return net1 == net2; +} +#else +static inline +int net_eq(const struct net *net1, const struct net *net2) +{ + return 1; +} +#endif + +static inline +void dev_net_set(struct net_device *dev, struct net *net) +{ +#ifdef CONFIG_NET_NS + release_net(dev->nd_net); + dev->nd_net = hold_net(net); +#endif +} + +static inline +struct net *sock_net(const struct sock *sk) +{ +#ifdef CONFIG_NET_NS + return sk->sk_net; +#else + return &init_net; +#endif +} + +/* This comes from include/linux/netdevice.h */ + +/* + * Net namespace inlines + */ +static inline +struct net *dev_net(const struct net_device *dev) +{ +#ifdef CONFIG_NET_NS + /* + * compat-wirelss backport note: + * For older kernels we may just need to always return init_net, + * not sure when we added dev->nd_net. + */ + return dev->nd_net; +#else + return &init_net; +#endif +} + + +/* + * 2.6.26 added its own unaligned API which the + * new drivers can use. Lets port it here by including it in older + * kernels and also deal with the architecture handling here. + */ + +#ifdef CONFIG_ALPHA + +#include +#include +#include + +#endif /* alpha */ +#ifdef CONFIG_ARM + +/* arm */ +#include +#include +#include + +#endif /* arm */ +#ifdef CONFIG_AVR32 + +/* + * AVR32 can handle some unaligned accesses, depending on the + * implementation. The AVR32 AP implementation can handle unaligned + * words, but halfwords must be halfword-aligned, and doublewords must + * be word-aligned. + * + * However, swapped word loads must be word-aligned so we can't + * optimize word loads in general. + */ + +#include +#include +#include + +#endif +#ifdef CONFIG_BLACKFIN + +#include +#include +#include + +#endif /* blackfin */ +#ifdef CONFIG_CRIS + +/* + * CRIS can do unaligned accesses itself. + */ +#include +#include + +#endif /* cris */ +#ifdef CONFIG_FRV + +#include +#include +#include + +#endif /* frv */ +#ifdef CONFIG_H8300 + +#include +#include +#include + +#endif /* h8300 */ +#ifdef CONFIG_IA64 + +#include +#include +#include + +#endif /* ia64 */ +#ifdef CONFIG_M32R + +#if defined(__LITTLE_ENDIAN__) +# include +# include +# include +#else +# include +# include +# include +#endif + +#endif /* m32r */ +#ifdef CONFIG_M68K /* this handles both m68k and m68knommu */ + +#ifdef CONFIG_COLDFIRE +#include +#include +#include +#else + +/* + * The m68k can do unaligned accesses itself. + */ +#include +#include +#endif + +#endif /* m68k and m68knommu */ +#ifdef CONFIG_MIPS + +#if defined(__MIPSEB__) +# include +# include +# include +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#elif defined(__MIPSEL__) +# include +# include +# include +#endif + +#endif /* mips */ +#ifdef CONFIG_MN10300 + +#include +#include + +#endif /* mn10300 */ +#ifdef CONFIG_PARISC + +#include +#include +#include + +#endif /* parisc */ +#ifdef CONFIG_PPC +/* + * The PowerPC can do unaligned accesses itself in big endian mode. + */ +#include +#include + +#endif /* ppc */ +#ifdef CONFIG_S390 + +/* + * The S390 can do unaligned accesses itself. + */ +#include +#include + +#endif /* s390 */ +#ifdef CONFIG_SUPERH + +/* SH can't handle unaligned accesses. */ +#ifdef __LITTLE_ENDIAN__ +# include +# include +# include +#else +# include +# include +# include +#endif + +#endif /* sh - SUPERH */ +#ifdef CONFIG_SPARC + +/* sparc and sparc64 */ +#include +#include +#include + +#endif /* sparc */ +#ifdef CONFIG_UML + +#include "asm/arch/unaligned.h" + +#endif /* um - uml */ +#ifdef CONFIG_V850 + +#include +#include +#include + +#endif /* v850 */ +#ifdef CONFIG_X86 +/* + * The x86 can do unaligned accesses itself. + */ +#include +#include + +#endif /* x86 */ +#ifdef CONFIG_XTENSA + +#ifdef __XTENSA_EL__ +# include +# include +# include +#elif defined(__XTENSA_EB__) +# include +# include +# include +#else +# error processor byte order undefined! +#endif + +#endif /* xtensa */ + +#define PCIE_LINK_STATE_L0S 1 +#define PCIE_LINK_STATE_L1 2 +#define PCIE_LINK_STATE_CLKPM 4 + +static inline void pci_disable_link_state(struct pci_dev *pdev, int state) +{ +} +/* source: include/linux/pci-aspm.h */ + + +#if BITS_PER_LONG == 64 + +/** + * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder + * + * This is commonly provided by 32bit archs to provide an optimized 64bit + * divide. + */ +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +#elif BITS_PER_LONG == 32 + +#ifndef div_u64_rem +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = do_div(dividend, divisor); + return dividend; +} +#endif + +#endif /* BITS_PER_LONG */ + +/** + * div_u64 - unsigned 64bit divide with 32bit divisor + * + * This is the most common 64bit divide and should be used if possible, + * as many 32bit archs can optimize this variant better than a full 64bit + * divide. + */ +#ifndef div_u64 +static inline u64 div_u64(u64 dividend, u32 divisor) +{ + u32 remainder; + return div_u64_rem(dividend, divisor, &remainder); +} +#endif +/* source: include/math64.h */ + +#define hex_asc_lo(x) hex_asc((x) & 0x0f) +#define hex_asc_hi(x) hex_asc(((x) & 0xf0) >> 4) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) */ + +#endif /* LINUX_26_26_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.27.h b/include/compat/linux/compat-2.6.27.h new file mode 100755 index 0000000..22fadcd --- /dev/null +++ b/include/compat/linux/compat-2.6.27.h @@ -0,0 +1,261 @@ +#ifndef LINUX_26_27_COMPAT_H +#define LINUX_26_27_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27)) + +#include +#include +#include +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) +#include +#include +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define PCI_PM_CAP_PME_SHIFT 11 + +/* I can't find a more suitable replacement... */ +#define flush_work(work) cancel_work_sync(work) + +struct builtin_fw { + char *name; + void *data; + unsigned long size; +}; + +/* + * On older kernels we do not have net_device Multi Queue support, but + * since we no longer use MQ on mac80211 we can simply use the 0 queue. + * Note that if other fullmac drivers make use of this they then need + * to be backported somehow or deal with just 1 queueue from MQ. + */ +static inline void netif_tx_wake_all_queues(struct net_device *dev) +{ + netif_wake_queue(dev); +} +static inline void netif_tx_start_all_queues(struct net_device *dev) +{ + netif_start_queue(dev); +} +static inline void netif_tx_stop_all_queues(struct net_device *dev) +{ + netif_stop_queue(dev); +} + +/* Are all TX queues of the device empty? */ +static inline bool qdisc_all_tx_empty(const struct net_device *dev) +{ + return skb_queue_empty(&dev->qdisc->q); +} + +bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); + +/* + * The net_device has a spin_lock on newer kernels, on older kernels we're out of luck + */ +#define netif_addr_lock_bh(dev) +#define netif_addr_unlock_bh(dev) + +/* + * To port this properly we'd have to port warn_slowpath_null(), + * which I'm lazy to do so just do a regular print for now. If you + * want to port this read kernel/panic.c + */ +#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0) + +/* This is ported directly as-is on newer kernels */ +#ifndef WARN +#define WARN(condition, format...) ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + __WARN_printf(format); \ + unlikely(__ret_warn_on); \ +}) +#endif + +/* On 2.6.27 a second argument was added, on older kernels we ignore it */ +#define dma_mapping_error(pdev, dma_addr) dma_mapping_error(dma_addr) +#define pci_dma_mapping_error(pdev, dma_addr) dma_mapping_error(pdev, dma_addr) + +/* This is from include/linux/ieee80211.h */ +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 + +/* New link list changes added as of 2.6.27, needed for ath9k */ + +static inline void __list_cut_position(struct list_head *list, + struct list_head *head, struct list_head *entry) +{ + struct list_head *new_first = entry->next; + list->next = head->next; + list->next->prev = list; + list->prev = entry; + entry->next = list; + head->next = new_first; + new_first->prev = head; +} + +/** + * list_cut_position - cut a list into two + * @list: a new list to add all removed entries + * @head: a list with entries + * @entry: an entry within head, could be the head itself + * and if so we won't cut the list + * + * This helper moves the initial part of @head, up to and + * including @entry, from @head to @list. You should + * pass on @entry an element you know is on @head. @list + * should be an empty list or a list you do not care about + * losing its data. + * + */ +static inline void list_cut_position(struct list_head *list, + struct list_head *head, struct list_head *entry) +{ + if (list_empty(head)) + return; + if (list_is_singular(head) && + (head->next != entry && head != entry)) + return; + if (entry == head) + INIT_LIST_HEAD(list); + else + __list_cut_position(list, head, entry); +} + + +/* __list_splice as re-implemented on 2.6.27, we backport it */ +static inline void __compat_list_splice_new_27(const struct list_head *list, + struct list_head *prev, + struct list_head *next) +{ + struct list_head *first = list->next; + struct list_head *last = list->prev; + + first->prev = prev; + prev->next = first; + + last->next = next; + next->prev = last; +} + +/** + * list_splice_tail - join two lists, each list being a queue + * @list: the new list to add. + * @head: the place to add it in the first list. + */ +static inline void list_splice_tail(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) + __compat_list_splice_new_27(list, head->prev, head); +} + +/** + * list_splice_tail_init - join two lists and reinitialise the emptied list + * @list: the new list to add. + * @head: the place to add it in the first list. + * + * Each of the lists is a queue. + * The list at @list is reinitialised + */ +static inline void list_splice_tail_init(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) { + __compat_list_splice_new_27(list, head->prev, head); + INIT_LIST_HEAD(list); + } +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) +extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); +extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz); +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */ + +#define iwe_stream_add_value(info, event, value, ends, iwe, event_len) iwe_stream_add_value(event, value, ends, iwe, event_len) +#define iwe_stream_add_point(info, stream, ends, iwe, extra) iwe_stream_add_point(stream, ends, iwe, extra) +#define iwe_stream_add_event(info, stream, ends, iwe, event_len) iwe_stream_add_event(stream, ends, iwe, event_len) + +/* Flags available in struct iw_request_info */ +#define IW_REQUEST_FLAG_COMPAT 0x0001 /* Compat ioctl call */ + +static inline int iwe_stream_lcp_len(struct iw_request_info *info) +{ +#ifdef CONFIG_COMPAT + if (info->flags & IW_REQUEST_FLAG_COMPAT) + return IW_EV_COMPAT_LCP_LEN; +#endif + return IW_EV_LCP_LEN; +} + +#ifdef CONFIG_ARM + +/* + * The caller asks to handle a range between offset and offset + size, + * but we process a larger range from 0 to offset + size due to lack of + * offset support. + */ + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t handle, unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_for_cpu(dev, handle, offset + size, dir); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t handle, unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_for_device(dev, handle, offset + size, dir); +} + +#endif /* arm */ + +#if defined(CONFIG_DEBUG_FS) +void debugfs_remove_recursive(struct dentry *dentry); +#else +static inline void debugfs_remove_recursive(struct dentry *dentry) +{ } +#endif + +#define device_create(cls, parent, devt, drvdata, fmt, ...) \ +({ \ + struct device *_dev; \ + _dev = (device_create)(cls, parent, devt, fmt, __VA_ARGS__); \ + dev_set_drvdata(_dev, drvdata); \ + _dev; \ +}) + +#define dev_name(dev) dev_name((struct device *)dev) + +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + ep->speed = (__u16)speed; +} + +static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) +{ + return ep->speed; +} + +/** + * lower_32_bits - return bits 0-31 of a number + * @n: the number we're accessing + */ +#define lower_32_bits(n) ((u32)(n)) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27)) */ + +#endif /* LINUX_26_27_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.28.h b/include/compat/linux/compat-2.6.28.h new file mode 100755 index 0000000..c92c8b4 --- /dev/null +++ b/include/compat/linux/compat-2.6.28.h @@ -0,0 +1,247 @@ +#ifndef LINUX_26_28_COMPAT_H +#define LINUX_26_28_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)) + +#include +#include +#include + +#ifndef ETH_P_PAE +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#endif + +#include + +#ifndef WARN_ONCE +#define WARN_ONCE(condition, format...) ({ \ + static int __warned; \ + int __ret_warn_once = !!(condition); \ + \ + if (unlikely(__ret_warn_once)) \ + if (WARN(!__warned, format)) \ + __warned = 1; \ + unlikely(__ret_warn_once); \ +}) +#endif /* From include/asm-generic/bug.h */ + +#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) + +#include +#include +#include +#ifdef pcmcia_parse_tuple +#undef pcmcia_parse_tuple +#define pcmcia_parse_tuple(tuple, parse) pccard_parse_tuple(tuple, parse) +#endif + +/* From : include/pcmcia/ds.h */ +/* loop CIS entries for valid configuration */ +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data), + void *priv_data); + +#endif /* CONFIG_PCMCIA */ + +/* USB anchors were added as of 2.6.23 */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +#if 0 +extern void usb_poison_urb(struct urb *urb); +#endif +extern void usb_unpoison_urb(struct urb *urb); + +#if 0 +extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); +#endif + +extern int usb_anchor_empty(struct usb_anchor *anchor); +#endif /* CONFIG_USB */ +#endif + + +void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); + +/** + * skb_queue_is_last - check if skb is the last entry in the queue + * @list: queue head + * @skb: buffer + * + * Returns true if @skb is the last buffer on the list. + */ +static inline bool skb_queue_is_last(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + return (skb->next == (struct sk_buff *) list); +} + +/** + * skb_queue_next - return the next packet in the queue + * @list: queue head + * @skb: current buffer + * + * Return the next packet in @list after @skb. It is only valid to + * call this if skb_queue_is_last() evaluates to false. + */ +static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + /* This BUG_ON may seem severe, but if we just return then we + * are going to dereference garbage. + */ + BUG_ON(skb_queue_is_last(list, skb)); + return skb->next; +} + +/** + * __skb_queue_head_init - initialize non-spinlock portions of sk_buff_head + * @list: queue to initialize + * + * This initializes only the list and queue length aspects of + * an sk_buff_head object. This allows to initialize the list + * aspects of an sk_buff_head without reinitializing things like + * the spinlock. It can also be used for on-stack sk_buff_head + * objects where the spinlock is known to not be used. + */ +static inline void __skb_queue_head_init(struct sk_buff_head *list) +{ + list->prev = list->next = (struct sk_buff *)list; + list->qlen = 0; +} + +static inline void __skb_queue_splice(const struct sk_buff_head *list, + struct sk_buff *prev, + struct sk_buff *next) +{ + struct sk_buff *first = list->next; + struct sk_buff *last = list->prev; + + first->prev = prev; + prev->next = first; + + last->next = next; + next->prev = last; +} + +/** + * skb_queue_splice - join two skb lists, this is designed for stacks + * @list: the new list to add + * @head: the place to add it in the first list + */ +static inline void skb_queue_splice(const struct sk_buff_head *list, + struct sk_buff_head *head) +{ + if (!skb_queue_empty(list)) { + __skb_queue_splice(list, (struct sk_buff *) head, head->next); + head->qlen += list->qlen; + } +} + +/** + * skb_queue_splice - join two skb lists and reinitialise the emptied list + * @list: the new list to add + * @head: the place to add it in the first list + * + * The list at @list is reinitialised + */ +static inline void skb_queue_splice_init(struct sk_buff_head *list, + struct sk_buff_head *head) +{ + if (!skb_queue_empty(list)) { + __skb_queue_splice(list, (struct sk_buff *) head, head->next); + head->qlen += list->qlen; + __skb_queue_head_init(list); + } +} + +/** + * skb_queue_splice_tail - join two skb lists and reinitialise the emptied list + * @list: the new list to add + * @head: the place to add it in the first list + * + * Each of the lists is a queue. + * The list at @list is reinitialised + */ +static inline void skb_queue_splice_tail_init(struct sk_buff_head *list, + struct sk_buff_head *head) +{ + if (!skb_queue_empty(list)) { + __skb_queue_splice(list, head->prev, (struct sk_buff *) head); + head->qlen += list->qlen; + __skb_queue_head_init(list); + } +} /* From include/linux/skbuff.h */ + +/** + * skb_queue_splice_tail - join two skb lists, each list being a queue + * @list: the new list to add + * @head: the place to add it in the first list + */ +static inline void skb_queue_splice_tail(const struct sk_buff_head *list, + struct sk_buff_head *head) +{ + if (!skb_queue_empty(list)) { + __skb_queue_splice(list, head->prev, (struct sk_buff *) head); + head->qlen += list->qlen; + } +} + +#ifndef DECLARE_TRACE + +#define TP_PROTO(args...) args +#define TP_ARGS(args...) args + +#define DECLARE_TRACE(name, proto, args) \ + static inline void _do_trace_##name(struct tracepoint *tp, proto) \ + { } \ + static inline void trace_##name(proto) \ + { } \ + static inline int register_trace_##name(void (*probe)(proto)) \ + { \ + return -ENOSYS; \ + } \ + static inline int unregister_trace_##name(void (*probe)(proto)) \ + { \ + return -ENOSYS; \ + } + +#define EXPORT_TRACEPOINT_SYMBOL_GPL(name) +#define EXPORT_TRACEPOINT_SYMBOL(name) + + +#endif + +/* openSuse includes round_jiffies_up in it's kernel 2.6.27. + * This is needed to prevent conflicts with the openSuse definition. + */ +#define round_jiffies_up backport_round_jiffies_up + +unsigned long round_jiffies_up(unsigned long j); + +extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, + int off, int size); + +#define wake_up_interruptible_poll(x, m) \ + __wake_up(x, TASK_INTERRUPTIBLE, 1, (void *) (m)) + +extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); + +int pci_wake_from_d3(struct pci_dev *dev, bool enable); + +#define alloc_workqueue(name, flags, max_active) __create_workqueue(name, flags, max_active) + +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)) */ + +#endif /* LINUX_26_28_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.29.h b/include/compat/linux/compat-2.6.29.h new file mode 100755 index 0000000..bc27772 --- /dev/null +++ b/include/compat/linux/compat-2.6.29.h @@ -0,0 +1,324 @@ +#ifndef LINUX_26_29_COMPAT_H +#define LINUX_26_29_COMPAT_H + +#include +#include +#include + +/* + * I kow this looks odd.. but 2.6.32 added the netdev_tx_t + * and we backport that there so inlcude that header first + * as we need it for the netdev ops. + */ +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29)) + +#include +#include + +#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ + +/* + * Older kernels do not have struct net_device_ops but what we can + * do is just define the data structure and use a caller to let us + * set the data structure's routines onto the old netdev, essentially + * doing it the old way. This avoids huge deltas on our backports. + */ + +/* + * This structure defines the management hooks for network devices. + * The following hooks can be defined; unless noted otherwise, they are + * optional and can be filled with a null pointer. + * + * int (*ndo_init)(struct net_device *dev); + * This function is called once when network device is registered. + * The network device can use this to any late stage initializaton + * or semantic validattion. It can fail with an error code which will + * be propogated back to register_netdev + * + * void (*ndo_uninit)(struct net_device *dev); + * This function is called when device is unregistered or when registration + * fails. It is not called if init fails. + * + * int (*ndo_open)(struct net_device *dev); + * This function is called when network device transistions to the up + * state. + * + * int (*ndo_stop)(struct net_device *dev); + * This function is called when network device transistions to the down + * state. + * + * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, + * struct net_device *dev); + * Called when a packet needs to be transmitted. + * Must return NETDEV_TX_OK , NETDEV_TX_BUSY. + * (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX) + * Required can not be NULL. + * + * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); + * Called to decide which queue to when device supports multiple + * transmit queues. + * + * void (*ndo_change_rx_flags)(struct net_device *dev, int flags); + * This function is called to allow device receiver to make + * changes to configuration when multicast or promiscious is enabled. + * + * void (*ndo_set_rx_mode)(struct net_device *dev); + * This function is called device changes address list filtering. + * + * void (*ndo_set_multicast_list)(struct net_device *dev); + * This function is called when the multicast address list changes. + * + * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); + * This function is called when the Media Access Control address + * needs to be changed. If this interface is not defined, the + * mac address can not be changed. + * + * int (*ndo_validate_addr)(struct net_device *dev); + * Test if Media Access Control address is valid for the device. + * + * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd); + * Called when a user request an ioctl which can't be handled by + * the generic interface code. If not defined ioctl's return + * not supported error code. + * + * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map); + * Used to set network devices bus interface parameters. This interface + * is retained for legacy reason, new devices should use the bus + * interface (PCI) for low level management. + * + * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu); + * Called when a user wants to change the Maximum Transfer Unit + * of a device. If not defined, any request to change MTU will + * will return an error. + * + * void (*ndo_tx_timeout)(struct net_device *dev); + * Callback uses when the transmitter has not made any progress + * for dev->watchdog ticks. + * + * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev); + * Called when a user wants to get the network device usage + * statistics. If not defined, the counters in dev->stats will + * be used. + * + * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp); + * If device support VLAN receive accleration + * (ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called + * when vlan groups for the device changes. Note: grp is NULL + * if no vlan's groups are being used. + * + * void (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid); + * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER) + * this function is called when a VLAN id is registered. + * + * void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid); + * If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER) + * this function is called when a VLAN id is unregistered. + * + * void (*ndo_poll_controller)(struct net_device *dev); + * + * SR-IOV management functions. + * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac); + * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos); + * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate); + * int (*ndo_get_vf_config)(struct net_device *dev, + * int vf, struct ifla_vf_info *ivf); + */ +#define HAVE_NET_DEVICE_OPS +struct net_device_ops { + int (*ndo_init)(struct net_device *dev); + void (*ndo_uninit)(struct net_device *dev); + int (*ndo_open)(struct net_device *dev); + int (*ndo_stop)(struct net_device *dev); + netdev_tx_t (*ndo_start_xmit) (struct sk_buff *skb, + struct net_device *dev); + u16 (*ndo_select_queue)(struct net_device *dev, + struct sk_buff *skb); + void (*ndo_change_rx_flags)(struct net_device *dev, + int flags); + void (*ndo_set_rx_mode)(struct net_device *dev); + void (*ndo_set_multicast_list)(struct net_device *dev); + int (*ndo_set_mac_address)(struct net_device *dev, + void *addr); + int (*ndo_validate_addr)(struct net_device *dev); + int (*ndo_do_ioctl)(struct net_device *dev, + struct ifreq *ifr, int cmd); + int (*ndo_set_config)(struct net_device *dev, + struct ifmap *map); + int (*ndo_change_mtu)(struct net_device *dev, + int new_mtu); + int (*ndo_neigh_setup)(struct net_device *dev, + struct neigh_parms *); + void (*ndo_tx_timeout) (struct net_device *dev); + + struct net_device_stats* (*ndo_get_stats)(struct net_device *dev); + + void (*ndo_vlan_rx_register)(struct net_device *dev, + struct vlan_group *grp); + void (*ndo_vlan_rx_add_vid)(struct net_device *dev, + unsigned short vid); + void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, + unsigned short vid); +#ifdef CONFIG_NET_POLL_CONTROLLER + void (*ndo_poll_controller)(struct net_device *dev); +#endif + int (*ndo_set_vf_mac)(struct net_device *dev, + int queue, u8 *mac); + int (*ndo_set_vf_vlan)(struct net_device *dev, + int queue, u16 vlan, u8 qos); + int (*ndo_set_vf_tx_rate)(struct net_device *dev, + int vf, int rate); +/* + * The struct ifla_vf_info was added via b280da8d54b8d82b52f368a8703b7ada6c1744d5 + * on the v2.6.34-rc1~233^2~338 release + */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) + int (*ndo_get_vf_config)(struct net_device *dev, + int vf, + struct ifla_vf_info *ivf); +#endif +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) + int (*ndo_fcoe_enable)(struct net_device *dev); + int (*ndo_fcoe_disable)(struct net_device *dev); + int (*ndo_fcoe_ddp_setup)(struct net_device *dev, + u16 xid, + struct scatterlist *sgl, + unsigned int sgc); + int (*ndo_fcoe_ddp_done)(struct net_device *dev, + u16 xid); +#define NETDEV_FCOE_WWNN 0 +#define NETDEV_FCOE_WWPN 1 + int (*ndo_fcoe_get_wwn)(struct net_device *dev, + u64 *wwn, int type); +#endif +}; + +void netdev_attach_ops(struct net_device *dev, + const struct net_device_ops *ops); + +/** + * skb_queue_is_first - check if skb is the first entry in the queue + * @list: queue head + * @skb: buffer + * + * Returns true if @skb is the first buffer on the list. + */ +static inline bool skb_queue_is_first(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + return (skb->prev == (struct sk_buff *) list); +} + +/** + * skb_queue_prev - return the prev packet in the queue + * @list: queue head + * @skb: current buffer + * + * Return the prev packet in @list before @skb. It is only valid to + * call this if skb_queue_is_first() evaluates to false. + */ +static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list, + const struct sk_buff *skb) +{ + /* This BUG_ON may seem severe, but if we just return then we + * are going to dereference garbage. + */ + BUG_ON(skb_queue_is_first(list, skb)); + return skb->prev; +} + + +static inline struct net_device_stats *dev_get_stats(struct net_device *dev) +{ + return dev->get_stats(dev); +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); +#endif /* CONFIG_USB */ +#endif + +#define DIV_ROUND_CLOSEST(x, divisor)( \ +{ \ + typeof(divisor) __divisor = divisor; \ + (((x) + ((__divisor) / 2)) / (__divisor)); \ +} \ +) + +extern int eth_mac_addr(struct net_device *dev, void *p); +extern int eth_change_mtu(struct net_device *dev, int new_mtu); +extern int eth_validate_addr(struct net_device *dev); + +#ifdef CONFIG_NET_NS + +static inline void write_pnet(struct net **pnet, struct net *net) +{ + *pnet = net; +} + +static inline struct net *read_pnet(struct net * const *pnet) +{ + return *pnet; +} + +#else + +#define write_pnet(pnet, net) do { (void)(net);} while (0) +#define read_pnet(pnet) (&init_net) + +/* + * swap - swap value of @a and @b + */ +#define swap(a, b) \ + do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) + +#endif + +extern int init_dummy_netdev(struct net_device *dev); + +#define compat_pci_suspend(fn) \ + int fn##_compat(struct pci_dev *pdev, pm_message_t state) \ + { \ + int r; \ + \ + r = fn(&pdev->dev); \ + if (r) \ + return r; \ + \ + pci_save_state(pdev); \ + pci_disable_device(pdev); \ + pci_set_power_state(pdev, PCI_D3hot); \ + \ + return 0; \ + } + +#define compat_pci_resume(fn) \ + int fn##_compat(struct pci_dev *pdev) \ + { \ + int r; \ + \ + pci_set_power_state(pdev, PCI_D0); \ + r = pci_enable_device(pdev); \ + if (r) \ + return r; \ + pci_restore_state(pdev); \ + \ + return fn(&pdev->dev); \ + } + +#else + +static inline void netdev_attach_ops(struct net_device *dev, + const struct net_device_ops *ops) +{ + dev->netdev_ops = ops; +} + +#define compat_pci_suspend(fn) +#define compat_pci_resume(fn) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29)) */ + +#endif /* LINUX_26_29_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.30.h b/include/compat/linux/compat-2.6.30.h new file mode 100755 index 0000000..28f3d54 --- /dev/null +++ b/include/compat/linux/compat-2.6.30.h @@ -0,0 +1,47 @@ +#ifndef LINUX_26_30_COMPAT_H +#define LINUX_26_30_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) + +#include + +#ifndef TP_PROTO +#define TP_PROTO(args...) TPPROTO(args) +#endif +#ifndef TP_ARGS +#define TP_ARGS(args...) TPARGS(args) +#endif + +#define IRQ_WAKE_THREAD (2) + +/* From : include/linux/pm.h */ +/* How to reorder dpm_list after device_move() */ +enum dpm_order { + DPM_ORDER_NONE, + DPM_ORDER_DEV_AFTER_PARENT, + DPM_ORDER_PARENT_BEFORE_DEV, + DPM_ORDER_DEV_LAST, +}; + +static inline void dev_set_uevent_suppress(struct device *dev, int val) +{ + dev->uevent_suppress = val; +} + +/* + * Print a one-time message (analogous to WARN_ONCE() et al): + */ +#define printk_once(x...) ({ \ + static bool __print_once; \ + \ + if (!__print_once) { \ + __print_once = true; \ + printk(x); \ + } \ +}) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) */ + +#endif /* LINUX_26_30_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.31.h b/include/compat/linux/compat-2.6.31.h new file mode 100755 index 0000000..25db973 --- /dev/null +++ b/include/compat/linux/compat-2.6.31.h @@ -0,0 +1,221 @@ +#ifndef LINUX_26_31_COMPAT_H +#define LINUX_26_31_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)) + +#include +#include +#include +#include +#include +#include + +/* + * These macros allow us to backport rfkill without any + * changes on cfg80211 through compat.diff. Note that this + * file will be included by rfkill_backport.h so we must + * not conflict with things there. + */ +#define rfkill_get_led_trigger_name backport_rfkill_get_led_trigger_name +#define rfkill_set_led_trigger_name backport_rfkill_set_led_trigger_name +#define rfkill_set_hw_state backport_rfkill_set_hw_state +#define rfkill_set_sw_state backport_rfkill_set_sw_state +#define rfkill_init_sw_state backport_rfkill_init_sw_state +#define rfkill_set_states backport_rfkill_set_states +#define rfkill_pause_polling backport_rfkill_pause_polling +#define rfkill_resume_polling backport_rfkill_resume_polling +#define rfkill_blocked backport_rfkill_blocked +#define rfkill_alloc backport_rfkill_alloc +#define rfkill_register backport_rfkill_register +#define rfkill_unregister backport_rfkill_unregister +#define rfkill_destroy backport_rfkill_destroy + +#ifndef ERFKILL +#if !defined(CONFIG_ALPHA) && !defined(CONFIG_MIPS) && !defined(CONFIG_PARISC) && !defined(CONFIG_SPARC) +#define ERFKILL 132 /* Operation not possible due to RF-kill */ +#endif +#ifdef CONFIG_ALPHA +#define ERFKILL 138 /* Operation not possible due to RF-kill */ +#endif +#ifdef CONFIG_MIPS +#define ERFKILL 167 /* Operation not possible due to RF-kill */ +#endif +#ifdef CONFIG_PARISC +#define ERFKILL 256 /* Operation not possible due to RF-kill */ +#endif +#ifdef CONFIG_SPARC +#define ERFKILL 134 /* Operation not possible due to RF-kill */ +#endif +#endif + +#ifndef NETDEV_PRE_UP +#define NETDEV_PRE_UP 0x000D +#endif + +#ifndef SDIO_DEVICE_ID_MARVELL_8688WLAN +#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 +#endif + +struct compat_threaded_irq { + unsigned int irq; + irq_handler_t handler; + irq_handler_t thread_fn; + void *dev_id; + char wq_name[64]; + struct workqueue_struct *wq; + struct work_struct work; +}; + +/* + * kmemleak was introduced on 2.6.31, since older kernels do not have + * we simply ignore its tuning. + */ +static inline void kmemleak_ignore(const void *ptr) +{ + return; +} + +static inline void kmemleak_not_leak(const void *ptr) +{ + return; +} + +static inline void kmemleak_no_scan(const void *ptr) +{ + return; +} + +/* + * Added via adf30907d63893e4208dfe3f5c88ae12bc2f25d5 + * + * There is no _sk_dst on older kernels, so just set the + * old dst to NULL and release it directly. + */ +static inline void skb_dst_drop(struct sk_buff *skb) +{ + dst_release(skb->dst); + skb->dst = NULL; +} + +static inline struct dst_entry *skb_dst(const struct sk_buff *skb) +{ + return (struct dst_entry *)skb->dst; +} + +static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) +{ + skb->dst = dst; +} + +static inline struct rtable *skb_rtable(const struct sk_buff *skb) +{ + return (struct rtable *)skb_dst(skb); +} + +/* Backport threaded IRQ support */ + +static inline +void compat_irq_work(struct work_struct *work) +{ + struct compat_threaded_irq *comp = container_of(work, struct compat_threaded_irq, work); + comp->thread_fn(comp->irq, comp->dev_id); +} + +static inline +irqreturn_t compat_irq_dispatcher(int irq, void *dev_id) +{ + struct compat_threaded_irq *comp = dev_id; + irqreturn_t res; + + res = comp->handler(irq, comp->dev_id); + if (res == IRQ_WAKE_THREAD) { + queue_work(comp->wq, &comp->work); + res = IRQ_HANDLED; + } + + return res; +} + +static inline +int compat_request_threaded_irq(struct compat_threaded_irq *comp, + unsigned int irq, + irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, + const char *name, + void *dev_id) +{ + comp->irq = irq; + comp->handler = handler; + comp->thread_fn = thread_fn; + comp->dev_id = dev_id; + INIT_WORK(&comp->work, compat_irq_work); + + if (!comp->wq) { + snprintf(comp->wq_name, sizeof(comp->wq_name), + "compirq/%u-%s", irq, name); + comp->wq = create_singlethread_workqueue(comp->wq_name); + if (!comp->wq) { + printk(KERN_ERR "Failed to create compat-threaded-IRQ workqueue %s\n", + comp->wq_name); + return -ENOMEM; + } + } + return request_irq(irq, compat_irq_dispatcher, flags, name, comp); +} + +static inline +void compat_free_threaded_irq(struct compat_threaded_irq *comp) +{ + free_irq(comp->irq, comp); +} + +static inline +void compat_destroy_threaded_irq(struct compat_threaded_irq *comp) +{ + if (comp->wq) + destroy_workqueue(comp->wq); + comp->wq = NULL; +} + +static inline +void compat_synchronize_threaded_irq(struct compat_threaded_irq *comp) +{ + synchronize_irq(comp->irq); + cancel_work_sync(&comp->work); +} + +/** + * list_entry_rcu - get the struct for this entry + * @ptr: the &struct list_head pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * This primitive may safely run concurrently with the _rcu list-mutation + * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock(). + */ +#define list_entry_rcu(ptr, type, member) \ + container_of(rcu_dereference(ptr), type, member) + +#define skb_walk_frags(skb, iter) \ + for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) + +#ifndef CONFIG_64BIT + +typedef struct { + long long counter; +} atomic64_t; + +extern long long atomic64_read(const atomic64_t *v); +extern long long atomic64_add_return(long long a, atomic64_t *v); + +#define atomic64_inc_return(v) atomic64_add_return(1LL, (v)) + +#endif + + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31)) */ + +#endif /* LINUX_26_31_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.32.h b/include/compat/linux/compat-2.6.32.h new file mode 100755 index 0000000..3506291 --- /dev/null +++ b/include/compat/linux/compat-2.6.32.h @@ -0,0 +1,129 @@ +#ifndef LINUX_26_32_COMPAT_H +#define LINUX_26_32_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)) + +#include +#include +#include +#include +#include + +#define SDIO_VENDOR_ID_INTEL 0x0089 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403 +#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404 +#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405 +#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406 + +static inline void flush_delayed_work(struct delayed_work *dwork) +{ + if (del_timer_sync(&dwork->timer)) { + /* + * This is what would happen on 2.6.32 but since we don't have + * access to the singlethread_cpu we can't really backport this, + * so avoid really *flush*ing the work... Oh well. Any better ideas? + + struct cpu_workqueue_struct *cwq; + cwq = wq_per_cpu(keventd_wq, get_cpu()); + __queue_work(cwq, &dwork->work); + put_cpu(); + + */ + } + flush_work(&dwork->work); +} + +/* + * struct genl_multicast_group was made netns aware through + * patch "genetlink: make netns aware" by johannes, we just + * force this to always use the default init_net + */ +#define genl_info_net(x) &init_net +/* Just use init_net for older kernels */ +#define get_net_ns_by_pid(x) &init_net + +/* net namespace is lost */ +#define genlmsg_multicast_netns(a, b, c, d, e) genlmsg_multicast(b, c, d, e) +#define genlmsg_multicast_allns(a, b, c, d) genlmsg_multicast(a, b, c, d) +#define genlmsg_unicast(net, skb, pid) genlmsg_unicast(skb, pid) + +#define dev_change_net_namespace(a, b, c) (-EOPNOTSUPP) + +#define SET_NETDEV_DEVTYPE(netdev, type) + +#ifdef __KERNEL__ +/* Driver transmit return codes */ +enum netdev_tx { + BACKPORT_NETDEV_TX_OK = NETDEV_TX_OK, /* driver took care of packet */ + BACKPORT_NETDEV_TX_BUSY = NETDEV_TX_BUSY, /* driver tx path was busy*/ + BACKPORT_NETDEV_TX_LOCKED = NETDEV_TX_LOCKED, /* driver tx lock was already taken */ +}; +typedef enum netdev_tx netdev_tx_t; +#endif /* __KERNEL__ */ + +/* + * dev_pm_ops is only available on kernels >= 2.6.29, for + * older kernels we rely on reverting the work to old + * power management style stuff. + */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) +/* + * Use this if you want to use the same suspend and resume callbacks for suspend + * to RAM and hibernation. + */ +#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \ +struct dev_pm_ops name = { \ + .suspend = suspend_fn, \ + .resume = resume_fn, \ + .freeze = suspend_fn, \ + .thaw = resume_fn, \ + .poweroff = suspend_fn, \ + .restore = resume_fn, \ +} +#else +#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) +#endif /* >= 2.6.29 */ + +#define wireless_send_event(a, b, c, d) wireless_send_event(a, b, c, (char * ) d) + +/* The export symbol in changed in compat/patches/15-symbol-export-conflicts.patch */ +#define ieee80211_rx(hw, skb) mac80211_ieee80211_rx(hw, skb) + +#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev) + +#define lockdep_assert_held(l) do { } while (0) + +/* + * Similar to the struct tm in userspace , but it needs to be here so + * that the kernel source is self contained. + */ +struct tm { + /* + * the number of seconds after the minute, normally in the range + * 0 to 59, but can be up to 60 to allow for leap seconds + */ + int tm_sec; + /* the number of minutes after the hour, in the range 0 to 59*/ + int tm_min; + /* the number of hours past midnight, in the range 0 to 23 */ + int tm_hour; + /* the day of the month, in the range 1 to 31 */ + int tm_mday; + /* the number of months since January, in the range 0 to 11 */ + int tm_mon; + /* the number of years since 1900 */ + long tm_year; + /* the number of days since Sunday, in the range 0 to 6 */ + int tm_wday; + /* the number of days since January 1, in the range 0 to 365 */ + int tm_yday; +}; + +void time_to_tm(time_t totalsecs, int offset, struct tm *result); + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)) */ + +#endif /* LINUX_26_32_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.33.h b/include/compat/linux/compat-2.6.33.h new file mode 100755 index 0000000..9cefea4 --- /dev/null +++ b/include/compat/linux/compat-2.6.33.h @@ -0,0 +1,172 @@ +#ifndef LINUX_26_33_COMPAT_H +#define LINUX_26_33_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) + +#include +#include +#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE) +#include +#include +#include +#endif +#include +#include + +#if defined(CONFIG_COMPAT_FIRMWARE_CLASS) +#define release_firmware compat_release_firmware +#define request_firmware compat_request_firmware +#define request_firmware_nowait compat_request_firmware_nowait +#endif + +#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) +int compat_request_firmware(const struct firmware **fw, const char *name, + struct device *device); +int compat_request_firmware_nowait( + struct module *module, int uevent, + const char *name, struct device *device, gfp_t gfp, void *context, + void (*cont)(const struct firmware *fw, void *context)); + +void compat_release_firmware(const struct firmware *fw); +#else +static inline int compat_request_firmware(const struct firmware **fw, + const char *name, + struct device *device) +{ + return -EINVAL; +} +static inline int request_firmware_nowait( + struct module *module, int uevent, + const char *name, struct device *device, gfp_t gfp, void *context, + void (*cont)(const struct firmware *fw, void *context)) +{ + return -EINVAL; +} + +static inline void compat_release_firmware(const struct firmware *fw) +{ +} +#endif + +/* mask KEY_RFKILL as RHEL6 backports this */ +#if !defined(KEY_RFKILL) +#define KEY_RFKILL 247 /* Key that controls all radios */ +#endif + +#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ +/* source: include/linux/if.h */ + +/* this will never happen on older kernels */ +#define NETDEV_POST_INIT 0xffff + +/* mask netdev_alloc_skb_ip_align as debian squeeze also backports this */ +#define netdev_alloc_skb_ip_align(a, b) compat_netdev_alloc_skb_ip_align(a, b) + +static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, + unsigned int length) +{ + struct sk_buff *skb = netdev_alloc_skb(dev, length + NET_IP_ALIGN); + + if (NET_IP_ALIGN && skb) + skb_reserve(skb, NET_IP_ALIGN); + return skb; +} + +#if defined(CONFIG_PCCARD) || defined(CONFIG_PCCARD_MODULE) + +#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) + +#define pcmcia_request_window(a, b, c) pcmcia_request_window(&a, b, c) + +#define pcmcia_map_mem_page(a, b, c) pcmcia_map_mem_page(b, c) + +/* loop over CIS entries */ +int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code, + int (*loop_tuple) (struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv_data), + void *priv_data); + +#endif /* CONFIG_PCMCIA */ + +/* loop over CIS entries */ +int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function, + cisdata_t code, cisparse_t *parse, void *priv_data, + int (*loop_tuple) (tuple_t *tuple, + cisparse_t *parse, + void *priv_data)); + +#endif /* CONFIG_PCCARD */ + +/** + * list_for_each_entry_continue_rcu - continue iteration over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Continue to iterate over list of given type, continuing after + * the current position. + */ +#define list_for_each_entry_continue_rcu(pos, head, member) \ + for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \ + prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) + +#define sock_recv_ts_and_drops(msg, sk, skb) sock_recv_timestamp(msg, sk, skb) + +/* mask pci_pcie_cap as debian squeeze also backports this */ +#define pci_pcie_cap(a) compat_pci_pcie_cap(a) + +/** + * pci_pcie_cap - get the saved PCIe capability offset + * @dev: PCI device + * + * PCIe capability offset is calculated at PCI device initialization + * time and saved in the data structure. This function returns saved + * PCIe capability offset. Using this instead of pci_find_capability() + * reduces unnecessary search in the PCI configuration space. If you + * need to calculate PCIe capability offset from raw device for some + * reasons, please use pci_find_capability() instead. + */ +static inline int pci_pcie_cap(struct pci_dev *dev) +{ + return pci_find_capability(dev, PCI_CAP_ID_EXP); +} + +/* mask pci_is_pcie as RHEL6 backports this */ +#define pci_is_pcie(a) compat_pci_is_pcie(a) + +/** + * pci_is_pcie - check if the PCI device is PCI Express capable + * @dev: PCI device + * + * Retrun true if the PCI device is PCI Express capable, false otherwise. + */ +static inline bool pci_is_pcie(struct pci_dev *dev) +{ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) + return dev->is_pcie; +#else + return !!pci_pcie_cap(dev); +#endif +} + +#ifdef __GNUC__ +#define __always_unused __attribute__((unused)) +#else +#define __always_unused /* unimplemented */ +#endif + +/* mask IS_ERR_OR_NULL as debian squeeze also backports this */ +#define IS_ERR_OR_NULL(a) compat_IS_ERR_OR_NULL(a) + +static inline long __must_check IS_ERR_OR_NULL(const void *ptr) +{ + return !ptr || IS_ERR_VALUE((unsigned long)ptr); +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) */ + +#endif /* LINUX_26_33_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.34.h b/include/compat/linux/compat-2.6.34.h new file mode 100755 index 0000000..db910ac --- /dev/null +++ b/include/compat/linux/compat-2.6.34.h @@ -0,0 +1,297 @@ +#ifndef LINUX_26_34_COMPAT_H +#define LINUX_26_34_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)) + +#include +#include + +#define netdev_mc_count(dev) ((dev)->mc_count) +#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) + +#define netdev_for_each_mc_addr(mclist, dev) \ + for (mclist = dev->mc_list; mclist; mclist = mclist->next) +/* source: include/linux/netdevice.h */ + + +/* Logging, debugging and troubleshooting/diagnostic helpers. */ + +/* netdev_printk helpers, similar to dev_printk */ + +#ifndef netdev_name +#define netdev_name(__dev) \ + ((__dev->reg_state != NETREG_REGISTERED) ? \ + "(unregistered net_device)" : __dev->name) +#endif + +#define netdev_printk(level, netdev, format, args...) \ + dev_printk(level, (netdev)->dev.parent, \ + "%s: " format, \ + netdev_name(netdev), ##args) + +#define netdev_emerg(dev, format, args...) \ + netdev_printk(KERN_EMERG, dev, format, ##args) +#define netdev_alert(dev, format, args...) \ + netdev_printk(KERN_ALERT, dev, format, ##args) +#define netdev_crit(dev, format, args...) \ + netdev_printk(KERN_CRIT, dev, format, ##args) +#define netdev_err(dev, format, args...) \ + netdev_printk(KERN_ERR, dev, format, ##args) +#define netdev_warn(dev, format, args...) \ + netdev_printk(KERN_WARNING, dev, format, ##args) +#define netdev_notice(dev, format, args...) \ + netdev_printk(KERN_NOTICE, dev, format, ##args) +#define netdev_info(dev, format, args...) \ + netdev_printk(KERN_INFO, dev, format, ##args) + +/* mask netdev_dbg as RHEL6 backports this */ +#if !defined(netdev_dbg) + +#if defined(DEBUG) +#define netdev_dbg(__dev, format, args...) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args) +#elif defined(CONFIG_DYNAMIC_DEBUG) +#define netdev_dbg(__dev, format, args...) \ +do { \ + dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ + netdev_name(__dev), ##args); \ +} while (0) +#else +#define netdev_dbg(__dev, format, args...) \ +({ \ + if (0) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args); \ + 0; \ +}) +#endif + +#endif + +/* mask netdev_vdbg as RHEL6 backports this */ +#if !defined(netdev_dbg) + +#if defined(VERBOSE_DEBUG) +#define netdev_vdbg netdev_dbg +#else + +#define netdev_vdbg(dev, format, args...) \ +({ \ + if (0) \ + netdev_printk(KERN_DEBUG, dev, format, ##args); \ + 0; \ +}) +#endif + +#endif + +/* + * netdev_WARN() acts like dev_printk(), but with the key difference + * of using a WARN/WARN_ON to get the message out, including the + * file/line information and a backtrace. + */ +#define netdev_WARN(dev, format, args...) \ + WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args); + +/* netif printk helpers, similar to netdev_printk */ + +#define netif_printk(priv, type, level, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_printk(level, (dev), fmt, ##args); \ +} while (0) + +#define netif_emerg(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_EMERG, dev, fmt, ##args) +#define netif_alert(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_ALERT, dev, fmt, ##args) +#define netif_crit(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_CRIT, dev, fmt, ##args) +#define netif_err(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_ERR, dev, fmt, ##args) +#define netif_warn(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_WARNING, dev, fmt, ##args) +#define netif_notice(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_NOTICE, dev, fmt, ##args) +#define netif_info(priv, type, dev, fmt, args...) \ + netif_printk(priv, type, KERN_INFO, (dev), fmt, ##args) + +/* mask netif_dbg as RHEL6 backports this */ +#if !defined(netif_dbg) + +#if defined(DEBUG) +#define netif_dbg(priv, type, dev, format, args...) \ + netif_printk(priv, type, KERN_DEBUG, dev, format, ##args) +#elif defined(CONFIG_DYNAMIC_DEBUG) +#define netif_dbg(priv, type, netdev, format, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + dynamic_dev_dbg((netdev)->dev.parent, \ + "%s: " format, \ + netdev_name(netdev), ##args); \ +} while (0) +#else +#define netif_dbg(priv, type, dev, format, args...) \ +({ \ + if (0) \ + netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \ + 0; \ +}) +#endif + +#endif + +/* mask netif_vdbg as RHEL6 backports this */ +#if !defined(netif_vdbg) + +#if defined(VERBOSE_DEBUG) +#define netif_vdbg netdev_dbg +#else +#define netif_vdbg(priv, type, dev, format, args...) \ +({ \ + if (0) \ + netif_printk(KERN_DEBUG, dev, format, ##args); \ + 0; \ +}) +#endif +#endif +/* source: include/linux/netdevice.h */ + + +static inline void device_lock(struct device *dev) +{ +#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP) + mutex_lock(&dev->mutex); +#else + down(&dev->sem); +#endif +} + +static inline int device_trylock(struct device *dev) +{ +#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP) + return mutex_trylock(&dev->mutex); +#else + return down_trylock(&dev->sem); +#endif +} + +static inline void device_unlock(struct device *dev) +{ +#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_PREEMPT_DESKTOP) + mutex_unlock(&dev->mutex); +#else + up(&dev->sem); +#endif +} + +#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) +#define PCMCIA_DEVICE_PROD_ID3(v3, vh3) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID3, \ + .prod_id = { NULL, NULL, (v3), NULL }, \ + .prod_id_hash = { 0, 0, (vh3), 0 }, } +#endif + +#define rcu_dereference_check(p, c) rcu_dereference(p) + +/** + * sysfs_attr_init - initialize a dynamically allocated sysfs attribute + * @attr: struct attribute to initialize + * + * Initialize a dynamically allocated struct attribute so we can + * make lockdep happy. This is a new requirement for attributes + * and initially this is only needed when lockdep is enabled. + * Lockdep gives a nice error when your attribute is added to + * sysfs if you don't have this. + */ +#ifdef CONFIG_DEBUG_LOCK_ALLOC +#define sysfs_attr_init(attr) \ +do { \ + static struct lock_class_key __key; \ + \ + (attr)->key = &__key; \ +} while(0) +#else +#define sysfs_attr_init(attr) do {} while(0) +#endif + +/** + * sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute + * @attr: struct bin_attribute to initialize + * + * Initialize a dynamically allocated struct bin_attribute so we + * can make lockdep happy. This is a new requirement for + * attributes and initially this is only needed when lockdep is + * enabled. Lockdep gives a nice error when your attribute is + * added to sysfs if you don't have this. + */ +#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr) + +#define usb_alloc_coherent(dev, size, mem_flags, dma) usb_buffer_alloc(dev, size, mem_flags, dma) +#define usb_free_coherent(dev, size, addr, dma) usb_buffer_free(dev, size, addr, dma) + +/* only include this if DEFINE_DMA_UNMAP_ADDR is not set as debian squeeze also backports this */ +#ifndef DEFINE_DMA_UNMAP_ADDR +#ifdef CONFIG_NEED_DMA_MAP_STATE +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME +#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) +#else +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) +#define dma_unmap_addr(PTR, ADDR_NAME) (0) +#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define dma_unmap_len(PTR, LEN_NAME) (0) +#define dma_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif +#endif + +/* mask dma_set_coherent_mask as debian squeeze also backports this */ +#define dma_set_coherent_mask(a, b) compat_dma_set_coherent_mask(a, b) + +static inline int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (!dma_supported(dev, mask)) + return -EIO; + dev->coherent_dma_mask = mask; + return 0; +} + +/* USB autosuspend and autoresume */ +static inline int usb_enable_autosuspend(struct usb_device *udev) +{ return 0; } +static inline int usb_disable_autosuspend(struct usb_device *udev) +{ return 0; } + +#define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ +#define sdio_set_host_pm_flags(a, b) 0 + +#define rcu_dereference_protected(p, c) (p) +#define rcu_access_pointer(p) ACCESS_ONCE(p) + +#define rcu_dereference_raw(p) rcu_dereference(p) + +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +/* + * This looks more complex than it should be. But we need to + * get the type for the ~ right in round_down (it needs to be + * as wide as the result!), and we want to evaluate the macro + * arguments just once each. + */ +#define __round_mask(x, y) ((__typeof__(x))((y)-1)) +#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) +#define round_down(x, y) ((x) & ~__round_mask(x, y)) + +static inline int rcu_read_lock_held(void) +{ + return 1; +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)) */ + +#endif /* LINUX_26_34_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.35.h b/include/compat/linux/compat-2.6.35.h new file mode 100755 index 0000000..5e43002 --- /dev/null +++ b/include/compat/linux/compat-2.6.35.h @@ -0,0 +1,48 @@ +#ifndef LINUX_26_35_COMPAT_H +#define LINUX_26_35_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) +#include +#include +#include +#include + +/* added on linux/kernel.h */ +#define USHRT_MAX ((u16)(~0U)) +#define SHRT_MAX ((s16)(USHRT_MAX>>1)) +#define SHRT_MIN ((s16)(-SHRT_MAX - 1)) + +#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ +#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ + +#define netdev_hw_addr dev_mc_list + +static inline wait_queue_head_t *sk_sleep(struct sock *sk) +{ + return sk->sk_sleep; +} + +#define sdio_writeb_readb(func, write_byte, addr, err_ret) sdio_readb(func, addr, err_ret) + +/* mask hex_to_bin as RHEL6 backports this */ +#define hex_to_bin(a) compat_hex_to_bin(a) + +int hex_to_bin(char ch); + +extern loff_t noop_llseek(struct file *file, loff_t offset, int origin); + +#define pm_qos_request(_qos) pm_qos_requirement(_qos) + +static inline struct usb_host_endpoint * +usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe) +{ + struct usb_host_endpoint **eps; + eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out; + return eps[usb_pipeendpoint(pipe)]; +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) */ + +#endif /* LINUX_26_35_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.36.h b/include/compat/linux/compat-2.6.36.h new file mode 100755 index 0000000..314fb35 --- /dev/null +++ b/include/compat/linux/compat-2.6.36.h @@ -0,0 +1,172 @@ +#ifndef LINUX_26_36_COMPAT_H +#define LINUX_26_36_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)) + +#include +#include +#include +#include +#include + +#define kparam_block_sysfs_write(a) +#define kparam_unblock_sysfs_write(a) + +/* mask va_format as RHEL6 backports this */ +#define va_format compat_va_format + +struct va_format { + const char *fmt; + va_list *va; +}; + +#define device_rename(dev, new_name) device_rename(dev, (char *)new_name) + +#ifdef CONFIG_COMPAT_USB_URB_THREAD_FIX +#define usb_scuttle_anchored_urbs(anchor) compat_usb_scuttle_anchored_urbs(anchor) +#define usb_get_from_anchor(anchor) compat_usb_get_from_anchor(anchor) +#define usb_unlink_anchored_urbs(anchor) compat_usb_unlink_anchored_urbs(anchor) + +extern void compat_usb_unlink_anchored_urbs(struct usb_anchor *anchor); +extern struct urb *compat_usb_get_from_anchor(struct usb_anchor *anchor); +extern void compat_usb_scuttle_anchored_urbs(struct usb_anchor *anchor); +#endif + +/** + * pcmcia_read_config_byte() - read a byte from a card configuration register + * + * pcmcia_read_config_byte() reads a byte from a configuration register in + * attribute memory. + */ +static inline int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val) +{ + int ret; + conf_reg_t reg = { 0, CS_READ, where, 0 }; + ret = pcmcia_access_configuration_register(p_dev, ®); + *val = reg.Value; + return ret; +} + +/** + * pcmcia_write_config_byte() - write a byte to a card configuration register + * + * pcmcia_write_config_byte() writes a byte to a configuration register in + * attribute memory. + */ +static inline int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val) +{ + conf_reg_t reg = { 0, CS_WRITE, where, val }; + return pcmcia_access_configuration_register(p_dev, ®); +} + +struct pm_qos_request_list { + u32 qos; + void *request; +}; + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)) + +#define pm_qos_add_request(_req, _class, _value) do { \ + (_req)->request = #_req; \ + (_req)->qos = _class; \ + pm_qos_add_requirement((_class), (_req)->request, (_value)); \ + } while(0) + +#define pm_qos_update_request(_req, _value) \ + pm_qos_update_requirement((_req)->qos, (_req)->request, (_value)) + +#define pm_qos_remove_request(_req) \ + pm_qos_remove_requirement((_req)->qos, (_req)->request) + +#else + +#define pm_qos_add_request(_req, _class, _value) do { \ + (_req)->request = pm_qos_add_request((_class), (_value)); \ + } while (0) + +#define pm_qos_update_request(_req, _value) \ + pm_qos_update_request((_req)->request, (_value)) + +#define pm_qos_remove_request(_req) \ + pm_qos_remove_request((_req)->request) + +#endif + +/* + * Dummy printk for disabled debugging statements to use whilst maintaining + * gcc's format and side-effect checking. + */ +static inline __attribute__ ((format (printf, 1, 2))) +int no_printk(const char *s, ...) { return 0; } + +#ifndef alloc_workqueue +#define alloc_workqueue(name, flags, max_active) __create_workqueue(name, flags, max_active, 0) +#endif + +#define EXTPROC 0200000 +#define TIOCPKT_IOCTL 64 + +static inline void tty_lock(void) __acquires(kernel_lock) +{ +#ifdef CONFIG_LOCK_KERNEL + /* kernel_locked is 1 for !CONFIG_LOCK_KERNEL */ + WARN_ON(kernel_locked()); +#endif + lock_kernel(); +} +static inline void tty_unlock(void) __releases(kernel_lock) +{ + unlock_kernel(); +} +#define tty_locked() (kernel_locked()) + +#define usleep_range(_min, _max) msleep((_max) / 1000) + +#define __rcu + +static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {} + +static inline bool skb_defer_rx_timestamp(struct sk_buff *skb) +{ + return false; +} + +static inline void skb_tx_timestamp(struct sk_buff *skb) +{ +} + +extern struct workqueue_struct *system_nrt_wq; + +void compat_system_workqueue_create(void); +void compat_system_workqueue_destroy(void); + +#define br_port_exists(dev) (dev->br_port) + +#else + +static inline void compat_system_workqueue_create(void) +{ +} + +static inline void compat_system_workqueue_destroy(void) +{ +} + +/* + * This is not part of The 2.6.37 kernel yet but we + * we use it to optimize the backport code we + * need to implement. Instead of using ifdefs + * to check what version of the check we use + * we just replace all checks on current code + * with this. I'll submit this upstream too, that + * way all we'd have to do is to implement this + * for older kernels, then we would not have to + * edit the upstrema code for backport efforts. + */ +#define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)) */ + +#endif /* LINUX_26_36_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.37.h b/include/compat/linux/compat-2.6.37.h new file mode 100755 index 0000000..c19e781 --- /dev/null +++ b/include/compat/linux/compat-2.6.37.h @@ -0,0 +1,140 @@ +#ifndef LINUX_26_37_COMPAT_H +#define LINUX_26_37_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) + +#include +#include + +#define SDIO_CLASS_BT_AMP 0x09 /* Type-A Bluetooth AMP interface */ + +extern struct kobj_ns_type_operations net_ns_type_operations; + +/* mask skb_checksum_none_assert as RHEL6 backports this */ +#define skb_checksum_none_assert(a) compat_skb_checksum_none_assert(a) + +/** + * skb_checksum_none_assert - make sure skb ip_summed is CHECKSUM_NONE + * @skb: skb to check + * + * fresh skbs have their ip_summed set to CHECKSUM_NONE. + * Instead of forcing ip_summed to CHECKSUM_NONE, we can + * use this helper, to document places where we make this assertion. + */ +static inline void skb_checksum_none_assert(struct sk_buff *skb) +{ +#ifdef DEBUG + BUG_ON(skb->ip_summed != CHECKSUM_NONE); +#endif +} + +#define pcmcia_enable_device(link) pcmcia_request_configuration(link, &link->conf) + +#include + +struct compat_genl_info { + struct genl_info *info; + + u32 snd_seq; + u32 snd_pid; + struct genlmsghdr *genlhdr; + struct nlattr **attrs; + void *user_ptr[2]; +}; +#define genl_info compat_genl_info + +struct compat_genl_ops { + struct genl_ops ops; + + u8 cmd; + u8 internal_flags; + unsigned int flags; + const struct nla_policy *policy; + + int (*doit)(struct sk_buff *skb, struct genl_info *info); + int (*dumpit)(struct sk_buff *skb, struct netlink_callback *cb); + int (*done)(struct netlink_callback *cb); +}; +#define genl_ops compat_genl_ops + +struct compat_genl_family { + struct genl_family family; + + struct list_head list; + + unsigned int id, hdrsize, version, maxattr; + const char *name; + bool netnsok; + + struct nlattr **attrbuf; + + int (*pre_doit)(struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info); + + void (*post_doit)(struct genl_ops *ops, struct sk_buff *skb, + struct genl_info *info); +}; + +#define genl_family compat_genl_family + +#define genl_register_family_with_ops compat_genl_register_family_with_ops + +int genl_register_family_with_ops(struct genl_family *family, + struct genl_ops *ops, size_t n_ops); + +#define genl_unregister_family compat_genl_unregister_family + +int genl_unregister_family(struct genl_family *family); + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)) +#define genl_info_net(_info) genl_info_net((_info)->info) +#endif + +#define genlmsg_reply(_msg, _info) genlmsg_reply(_msg, (_info)->info) +#define genlmsg_put(_skb, _pid, _seq, _fam, _flags, _cmd) genlmsg_put(_skb, _pid, _seq, &(_fam)->family, _flags, _cmd) +#define genl_register_mc_group(_fam, _grp) genl_register_mc_group(&(_fam)->family, _grp) +#define genl_unregister_mc_group(_fam, _grp) genl_unregister_mc_group(&(_fam)->family, _grp) + + +extern void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); + +#define led_classdev_unregister compat_led_classdev_unregister +extern void compat_led_classdev_unregister(struct led_classdev *led_cdev); + +#define led_brightness_set compat_led_brightness_set +extern void compat_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness); + +#define alloc_ordered_workqueue(name, flags) create_singlethread_workqueue(name) + +#define netdev_refcnt_read(a) atomic_read(&a->refcnt) + +/* mask vzalloc as RHEL6 backports this */ +#define vzalloc(a) compat_vzalloc(a) + +extern void *vzalloc(unsigned long size); + +#define rtnl_dereference(p) \ + rcu_dereference_protected(p, lockdep_rtnl_is_held()) + +/** + * RCU_INIT_POINTER() - initialize an RCU protected pointer + * + * Initialize an RCU-protected pointer in such a way to avoid RCU-lockdep + * splats. + */ +#define RCU_INIT_POINTER(p, v) \ + p = (typeof(*v) __force __rcu *)(v) + +static inline bool skb_has_frag_list(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->frag_list != NULL; +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) */ + +#endif /* LINUX_26_37_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.38.h b/include/compat/linux/compat-2.6.38.h new file mode 100755 index 0000000..49460e6 --- /dev/null +++ b/include/compat/linux/compat-2.6.38.h @@ -0,0 +1,95 @@ +#ifndef LINUX_26_38_COMPAT_H +#define LINUX_26_38_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)) + +#include +#include +#include + +/* rename member in struct mmc_host in include/linux/mmc/host.h */ +#define max_segs max_hw_segs + + +/* Exponentially weighted moving average (EWMA) */ + +/* For more documentation see lib/average.c */ + +struct ewma { + unsigned long internal; + unsigned long factor; + unsigned long weight; +}; + +extern void ewma_init(struct ewma *avg, unsigned long factor, + unsigned long weight); + +extern struct ewma *ewma_add(struct ewma *avg, unsigned long val); + +/** + * ewma_read() - Get average value + * @avg: Average structure + * + * Returns the average value held in @avg. + */ +static inline unsigned long ewma_read(const struct ewma *avg) +{ + return DIV_ROUND_CLOSEST(avg->internal, avg->factor); +} + +#define pr_warn pr_warning +#define create_freezable_workqueue create_freezeable_workqueue + +static inline int skb_checksum_start_offset(const struct sk_buff *skb) +{ + return skb->csum_start - skb_headroom(skb); +} + +/* from include/linux/printk.h */ +#define pr_emerg_once(fmt, ...) \ + printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert_once(fmt, ...) \ + printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit_once(fmt, ...) \ + printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err_once(fmt, ...) \ + printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn_once(fmt, ...) \ + printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_notice_once(fmt, ...) \ + printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info_once(fmt, ...) \ + printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +#define pr_cont_once(fmt, ...) \ + printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__) +#if defined(DEBUG) +#define pr_debug_once(fmt, ...) \ + printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_debug_once(fmt, ...) \ + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#endif + +/* include/linux/netdevice.h */ +#define alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) \ + alloc_netdev_mq(sizeof_priv, name, setup, \ + max_t(unsigned int, txqs, rxqs)) + +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ + +/** + * is_unicast_ether_addr - Determine if the Ethernet address is unicast + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is a unicast address. + */ +static inline int is_unicast_ether_addr(const u8 *addr) +{ + return !is_multicast_ether_addr(addr); +} + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)) */ + +#endif /* LINUX_26_38_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.39.h b/include/compat/linux/compat-2.6.39.h new file mode 100755 index 0000000..254ad57 --- /dev/null +++ b/include/compat/linux/compat-2.6.39.h @@ -0,0 +1,169 @@ +#ifndef LINUX_26_39_COMPAT_H +#define LINUX_26_39_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39)) + +#include +#include +#include + +#define tiocmget(tty) tiocmget(tty, NULL) +#define tiocmset(tty, set, clear) tiocmset(tty, NULL, set, clear) + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) +extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)) */ + +static inline int irq_set_irq_wake(unsigned int irq, unsigned int on) +{ + return set_irq_wake(irq, on); +} +static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) +{ + return set_irq_chip(irq, chip); +} +static inline int irq_set_handler_data(unsigned int irq, void *data) +{ + return set_irq_data(irq, data); +} +static inline int irq_set_chip_data(unsigned int irq, void *data) +{ + return set_irq_chip_data(irq, data); +} +static inline int irq_set_irq_type(unsigned int irq, unsigned int type) +{ + return set_irq_type(irq, type); +} +static inline int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry) +{ + return set_irq_msi(irq, entry); +} +static inline struct irq_chip *irq_get_chip(unsigned int irq) +{ + return get_irq_chip(irq); +} +static inline void *irq_get_chip_data(unsigned int irq) +{ + return get_irq_chip_data(irq); +} +static inline void *irq_get_handler_data(unsigned int irq) +{ + return get_irq_data(irq); +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) +static inline void *irq_data_get_irq_handler_data(struct irq_data *d) +{ + return irq_data_get_irq_data(d); +} +#endif + +static inline struct msi_desc *irq_get_msi_desc(unsigned int irq) +{ + return get_irq_msi(irq); +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)) +static inline void irq_set_noprobe(unsigned int irq) +{ + set_irq_noprobe(irq); +} +static inline void irq_set_probe(unsigned int irq) +{ + set_irq_probe(irq); +} +#endif + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) +static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc) +{ + return get_irq_desc_chip(desc); +} +static inline void *irq_desc_get_handler_data(struct irq_desc *desc) +{ + return get_irq_desc_data(desc); +} + +static inline void *irq_desc_get_chip_data(struct irq_desc *desc) +{ + return get_irq_desc_chip_data(desc); +} + +static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc) +{ + return get_irq_desc_msi(desc); +} +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) */ + +/* + * kstrto* was included in kernel 2.6.38.4 and causes conflicts with the + * version included in compat-wireless. We use strict_strtol to check if + * kstrto* is already available. + */ +#ifndef strict_strtol +/* Internal, do not use. */ +int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res); +int __must_check _kstrtol(const char *s, unsigned int base, long *res); + +int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res); +int __must_check kstrtoll(const char *s, unsigned int base, long long *res); +static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res) +{ + /* + * We want to shortcut function call, but + * __builtin_types_compatible_p(unsigned long, unsigned long long) = 0. + */ + if (sizeof(unsigned long) == sizeof(unsigned long long) && + __alignof__(unsigned long) == __alignof__(unsigned long long)) + return kstrtoull(s, base, (unsigned long long *)res); + else + return _kstrtoul(s, base, res); +} + +static inline int __must_check kstrtol(const char *s, unsigned int base, long *res) +{ + /* + * We want to shortcut function call, but + * __builtin_types_compatible_p(long, long long) = 0. + */ + if (sizeof(long) == sizeof(long long) && + __alignof__(long) == __alignof__(long long)) + return kstrtoll(s, base, (long long *)res); + else + return _kstrtol(s, base, res); +} + +int __must_check kstrtouint(const char *s, unsigned int base, unsigned int *res); +int __must_check kstrtoint(const char *s, unsigned int base, int *res); + +static inline int __must_check kstrtou64(const char *s, unsigned int base, u64 *res) +{ + return kstrtoull(s, base, res); +} + +static inline int __must_check kstrtos64(const char *s, unsigned int base, s64 *res) +{ + return kstrtoll(s, base, res); +} + +static inline int __must_check kstrtou32(const char *s, unsigned int base, u32 *res) +{ + return kstrtouint(s, base, res); +} + +static inline int __must_check kstrtos32(const char *s, unsigned int base, s32 *res) +{ + return kstrtoint(s, base, res); +} + +int __must_check kstrtou16(const char *s, unsigned int base, u16 *res); +int __must_check kstrtos16(const char *s, unsigned int base, s16 *res); +int __must_check kstrtou8(const char *s, unsigned int base, u8 *res); +int __must_check kstrtos8(const char *s, unsigned int base, s8 *res); +#endif /* ifndef strict_strtol */ + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39)) */ + +#endif /* LINUX_26_39_COMPAT_H */ diff --git a/include/compat/linux/compat-2.6.h b/include/compat/linux/compat-2.6.h new file mode 100755 index 0000000..121d88f --- /dev/null +++ b/include/compat/linux/compat-2.6.h @@ -0,0 +1,42 @@ +#ifndef LINUX_26_COMPAT_H +#define LINUX_26_COMPAT_H + +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 1, 0)) +#include +#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 33)) +#include +#else +#include +#endif +#include + +/* + * Each compat file represents compatibility code for new kernel + * code introduced for *that* kernel revision. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#endif /* LINUX_26_COMPAT_H */ diff --git a/include/compat/linux/compat-3.0.h b/include/compat/linux/compat-3.0.h new file mode 100755 index 0000000..c5cd58d --- /dev/null +++ b/include/compat/linux/compat-3.0.h @@ -0,0 +1,130 @@ +#ifndef LINUX_3_0_COMPAT_H +#define LINUX_3_0_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)) + +#include + +/* + * since commit 1c5cae815d19ffe02bdfda1260949ef2b1806171 + * "net: call dev_alloc_name from register_netdevice" dev_alloc_name is + * called automatically. This is not implemented in older kernel + * versions so it will result in device wrong names. + */ +static inline int register_netdevice_name(struct net_device *dev) +{ + int err; + + if (strchr(dev->name, '%')) { + err = dev_alloc_name(dev, dev->name); + if (err < 0) + return err; + } + + return register_netdevice(dev); +} + +#define register_netdevice(dev) register_netdevice_name(dev) + +/* BCMA core, see drivers/bcma/ */ +#ifndef BCMA_CORE +/* Broadcom's specific AMBA core, see drivers/bcma/ */ +struct bcma_device_id { + __u16 manuf; + __u16 id; + __u8 rev; + __u8 class; +}; +#define BCMA_CORE(_manuf, _id, _rev, _class) \ + { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, } +#define BCMA_CORETABLE_END \ + { 0, }, + +#define BCMA_ANY_MANUF 0xFFFF +#define BCMA_ANY_ID 0xFFFF +#define BCMA_ANY_REV 0xFF +#define BCMA_ANY_CLASS 0xFF +#endif /* BCMA_CORE */ + +int mac_pton(const char *s, u8 *mac); + +int __must_check kstrtoull_from_user(const char __user *s, size_t count, unsigned int base, unsigned long long *res); +int __must_check kstrtoll_from_user(const char __user *s, size_t count, unsigned int base, long long *res); +int __must_check kstrtoul_from_user(const char __user *s, size_t count, unsigned int base, unsigned long *res); +int __must_check kstrtol_from_user(const char __user *s, size_t count, unsigned int base, long *res); +int __must_check kstrtouint_from_user(const char __user *s, size_t count, unsigned int base, unsigned int *res); +int __must_check kstrtoint_from_user(const char __user *s, size_t count, unsigned int base, int *res); +int __must_check kstrtou16_from_user(const char __user *s, size_t count, unsigned int base, u16 *res); +int __must_check kstrtos16_from_user(const char __user *s, size_t count, unsigned int base, s16 *res); +int __must_check kstrtou8_from_user(const char __user *s, size_t count, unsigned int base, u8 *res); +int __must_check kstrtos8_from_user(const char __user *s, size_t count, unsigned int base, s8 *res); + +static inline int __must_check kstrtou64_from_user(const char __user *s, size_t count, unsigned int base, u64 *res) +{ + return kstrtoull_from_user(s, count, base, res); +} + +static inline int __must_check kstrtos64_from_user(const char __user *s, size_t count, unsigned int base, s64 *res) +{ + return kstrtoll_from_user(s, count, base, res); +} + +static inline int __must_check kstrtou32_from_user(const char __user *s, size_t count, unsigned int base, u32 *res) +{ + return kstrtouint_from_user(s, count, base, res); +} + +static inline int __must_check kstrtos32_from_user(const char __user *s, size_t count, unsigned int base, s32 *res) +{ + return kstrtoint_from_user(s, count, base, res); +} + +/* + * This adds a nested function everywhere kfree_rcu() was called. This + * function frees the memory and is given as a function to call_rcu(). + * The rcu callback could happen every time also after the module was + * unloaded and this will cause problems. + */ +#define kfree_rcu(data, rcuhead) do { \ + void __kfree_rcu_fn(struct rcu_head *rcu_head) \ + { \ + void *___ptr; \ + ___ptr = container_of(rcu_head, typeof(*(data)), rcuhead);\ + kfree(___ptr); \ + } \ + call_rcu(&(data)->rcuhead, __kfree_rcu_fn); \ + } while (0) + +#ifdef MODULE + +/* + * The define overwriting module_exit is based on the original module_exit + * which looks like this: + * #define module_exit(exitfn) \ + * static inline exitcall_t __exittest(void) \ + * { return exitfn; } \ + * void cleanup_module(void) __attribute__((alias(#exitfn))); + * + * We replaced the call to the actual function exitfn() with a call to our + * function which calls the original exitfn() and then rcu_barrier() + * + * As a module will not be unloaded that ofter it should not have a big + * performance impact when rcu_barrier() is called on every module exit, + * also when no kfree_rcu() backport is used in that module. + */ +#undef module_exit +#define module_exit(exitfn) \ + static void __exit __exit_compat(void) \ + { \ + exitfn(); \ + rcu_barrier(); \ + } \ + void cleanup_module(void) __attribute__((alias("__exit_compat"))); + +#endif + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0)) */ + +#endif /* LINUX_3_0_COMPAT_H */ diff --git a/include/compat/linux/compat-3.1.h b/include/compat/linux/compat-3.1.h new file mode 100755 index 0000000..5b00ac9 --- /dev/null +++ b/include/compat/linux/compat-3.1.h @@ -0,0 +1,49 @@ +#ifndef LINUX_3_1_COMPAT_H +#define LINUX_3_1_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0)) + +#include + +#define genl_dump_check_consistent(cb, user_hdr, family) + +#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing + * skbs on transmit */ + +#define PCMCIA_DEVICE_MANF_CARD_PROD_ID3(manf, card, v3, vh3) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \ + PCMCIA_DEV_ID_MATCH_CARD_ID| \ + PCMCIA_DEV_ID_MATCH_PROD_ID3, \ + .manf_id = (manf), \ + .card_id = (card), \ + .prod_id = { NULL, NULL, (v3), NULL }, \ + .prod_id_hash = { 0, 0, (vh3), 0 }, } + +/* + * This has been defined in include/linux/security.h for some time, but was + * only given an EXPORT_SYMBOL for 3.1. Add a compat_* definition to avoid + * breaking the compile. + */ +#define security_sk_clone(a, b) compat_security_sk_clone(a, b) + +static inline void security_sk_clone(const struct sock *sk, struct sock *newsk) +{ +} + +/* + * In many versions, several architectures do not seem to include an + * atomic64_t implementation, and do not include the software emulation from + * asm-generic/atomic64_t. + * Detect and handle this here. + */ +#include + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) && !defined(ATOMIC64_INIT) && !defined(CONFIG_X86) && !((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)) && defined(CONFIG_ARM) && !defined(CONFIG_GENERIC_ATOMIC64)) +#include +#endif + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0)) */ + +#endif /* LINUX_3_1_COMPAT_H */ diff --git a/include/compat/linux/compat-3.2.h b/include/compat/linux/compat-3.2.h new file mode 100755 index 0000000..cb14f0b --- /dev/null +++ b/include/compat/linux/compat-3.2.h @@ -0,0 +1,81 @@ +#ifndef LINUX_3_2_COMPAT_H +#define LINUX_3_2_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)) + +#include +#include + +#define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0) + +/** + * skb_frag_page - retrieve the page refered to by a paged fragment + * @frag: the paged fragment + * + * Returns the &struct page associated with @frag. + */ +static inline struct page *skb_frag_page(const skb_frag_t *frag) +{ + return frag->page; +} + +/** + * skb_frag_dma_map - maps a paged fragment via the DMA API + * @device: the device to map the fragment to + * @frag: the paged fragment to map + * @offset: the offset within the fragment (starting at the + * fragment's own offset) + * @size: the number of bytes to map + * @direction: the direction of the mapping (%PCI_DMA_*) + * + * Maps the page associated with @frag to @device. + */ +static inline dma_addr_t skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} + +#define ETH_P_TDLS 0x890D /* TDLS */ + +static inline unsigned int skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} + +static inline char *hex_byte_pack(char *buf, u8 byte) +{ + *buf++ = hex_asc_hi(byte); + *buf++ = hex_asc_lo(byte); + return buf; +} + +/* module_platform_driver() - Helper macro for drivers that don't do + * anything special in module init/exit. This eliminates a lot of + * boilerplate. Each module may only use this macro once, and + * calling it replaces module_init() and module_exit() + */ +#define module_platform_driver(__platform_driver) \ + module_driver(__platform_driver, platform_driver_register, \ + platform_driver_unregister) + +static inline void *dma_zalloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret = dma_alloc_coherent(dev, size, dma_handle, flag); + if (ret) + memset(ret, 0, size); + return ret; +} + +extern int __netdev_printk(const char *level, const struct net_device *dev, + struct va_format *vaf); + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0)) */ + +#endif /* LINUX_3_2_COMPAT_H */ diff --git a/include/compat/linux/compat-3.3.h b/include/compat/linux/compat-3.3.h new file mode 100755 index 0000000..4965f23 --- /dev/null +++ b/include/compat/linux/compat-3.3.h @@ -0,0 +1,56 @@ +#ifndef LINUX_3_3_COMPAT_H +#define LINUX_3_3_COMPAT_H + +#include + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) + +/* include to override NL80211_FEATURE_SK_TX_STATUS */ +#include + +static inline void skb_complete_wifi_ack(struct sk_buff *skb, bool acked) +{ + WARN_ON(1); +} +#define NL80211_FEATURE_SK_TX_STATUS 0 + +typedef u32 netdev_features_t; + +/* source include/linux/device.h */ +/** + * module_driver() - Helper macro for drivers that don't do anything + * special in module init/exit. This eliminates a lot of boilerplate. + * Each module may only use this macro once, and calling it replaces + * module_init() and module_exit(). + * + * Use this macro to construct bus specific macros for registering + * drivers, and do not use it on its own. + */ +#define module_driver(__driver, __register, __unregister) \ +static int __init __driver##_init(void) \ +{ \ + return __register(&(__driver)); \ +} \ +module_init(__driver##_init); \ +static void __exit __driver##_exit(void) \ +{ \ + __unregister(&(__driver)); \ +} \ +module_exit(__driver##_exit); + +/* source include/linux/usb.h */ +/** + * module_usb_driver() - Helper macro for registering a USB driver + * @__usb_driver: usb_driver struct + * + * Helper macro for USB drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_usb_driver(__usb_driver) \ + module_driver(__usb_driver, usb_register, \ + usb_deregister) + +#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */ + +#endif /* LINUX_3_3_COMPAT_H */ diff --git a/include/compat/linux/compat_autoconf.h b/include/compat/linux/compat_autoconf.h new file mode 100755 index 0000000..eb10f02 --- /dev/null +++ b/include/compat/linux/compat_autoconf.h @@ -0,0 +1,38 @@ +#ifndef COMPAT_AUTOCONF_INCLUDED +#define COMPAT_AUTOCONF_INCLUDED + +/* + * This is an example of a compat autconf header file that gets + * automatically generated by your projet. You will only need this + * if you are working with a lot of config options. + * + * Your project will likely just override this, or leave this as-is. + */ + +/* + * Example automatically generated C config: don't edit + * Thu Dec 10 10:34:11 PST 2009 + * compat-wireless-2.6: master-2009-11-19-5-gb4fd4dd + * linux-2.6: next-20091208 + */ +/* #define COMPAT_PROJECT_FOO_RELEASE "master-2009-11-19-5-gb4fd4dd" +#define COMPAT_UPSTREAM_FOO_KERNEL_RELEASE "next-20091208" */ + +/* Example kernel version minimum requirement */ +/* #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)) +#error Compat-wireless requirement: Linux >= 2,6,10 +#endif */ /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) */ + +/* Example hard requirement */ +/* #error Compat-wireless requirement: +CONFIG_WIRELESS_EXT must be enabled in your kernel +#endif */ /* CONFIG_WIRELESS_EXT */ + +/* + * Example of how to match your external modules kconfig options into this. + * You'll need something to generate this for you. + */ +/* #ifndef CONFIG_FOO_BAR +#define CONFIG_FOO_BAR 1 */ + +#endif /* COMPAT_AUTOCONF_INCLUDED */ diff --git a/include/compat/linux/cordic.h b/include/compat/linux/cordic.h new file mode 100755 index 0000000..f932093 --- /dev/null +++ b/include/compat/linux/cordic.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CORDIC_H_ +#define __CORDIC_H_ + +#include + +/** + * struct cordic_iq - i/q coordinate. + * + * @i: real part of coordinate (in phase). + * @q: imaginary part of coordinate (quadrature). + */ +struct cordic_iq { + s32 i; + s32 q; +}; + +/** + * cordic_calc_iq() - calculates the i/q coordinate for given angle. + * + * @theta: angle in degrees for which i/q coordinate is to be calculated. + * @coord: function output parameter holding the i/q coordinate. + * + * The function calculates the i/q coordinate for a given angle using + * cordic algorithm. The coordinate consists of a real (i) and an + * imaginary (q) part. The real part is essentially the cosine of the + * angle and the imaginary part is the sine of the angle. The returned + * values are scaled by 2^16 for precision. The range for theta is + * for -180 degrees to +180 degrees. Passed values outside this range are + * converted before doing the actual calculation. + */ +struct cordic_iq cordic_calc_iq(s32 theta); + +#endif /* __CORDIC_H_ */ diff --git a/include/compat/linux/crc8.h b/include/compat/linux/crc8.h new file mode 100755 index 0000000..13c8dab --- /dev/null +++ b/include/compat/linux/crc8.h @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CRC8_H_ +#define __CRC8_H_ + +#include + +/* see usage of this value in crc8() description */ +#define CRC8_INIT_VALUE 0xFF + +/* + * Return value of crc8() indicating valid message+crc. This is true + * if a CRC is inverted before transmission. The CRC computed over the + * whole received bitstream is _table[x], where x is the bit pattern + * of the modification (almost always 0xff). + */ +#define CRC8_GOOD_VALUE(_table) (_table[0xFF]) + +/* required table size for crc8 algorithm */ +#define CRC8_TABLE_SIZE 256 + +/* helper macro assuring right table size is used */ +#define DECLARE_CRC8_TABLE(_table) \ + static u8 _table[CRC8_TABLE_SIZE] + +/** + * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * regular bit order (lsb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For lsb first direction x^7 maps to the lsb. So the polynomial is as below. + * + * - lsb first: poly = 10101011(1) = 0xAB + */ +void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * reverse bit order (msb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For msb first direction x^7 maps to the msb. So the polynomial is as below. + * + * - msb first: poly = (1)11010101 = 0xD5 + */ +void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8() - calculate a crc8 over the given input data. + * + * @table: crc table used for calculation. + * @pdata: pointer to data buffer. + * @nbytes: number of bytes in data buffer. + * @crc: previous returned crc8 value. + * + * The CRC8 is calculated using the polynomial given in crc8_populate_msb() + * or crc8_populate_lsb(). + * + * The caller provides the initial value (either %CRC8_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When validating a byte + * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE + * indicates the byte stream data can be considered valid. + * + * Reference: + * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993 + * Williams, Ross N., rossross.net + * (see URL http://www.ross.net/crc/download/crc_v3.txt). + */ +u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc); + +#endif /* __CRC8_H_ */ diff --git a/include/compat/linux/eeprom_93cx6.h b/include/compat/linux/eeprom_93cx6.h new file mode 100755 index 0000000..c4627cb --- /dev/null +++ b/include/compat/linux/eeprom_93cx6.h @@ -0,0 +1,74 @@ +/* + Copyright (C) 2004 - 2006 rt2x00 SourceForge Project + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: eeprom_93cx6 + Abstract: EEPROM reader datastructures for 93cx6 chipsets. + Supported chipsets: 93c46, 93c56 and 93c66. + */ + +/* + * EEPROM operation defines. + */ +#define PCI_EEPROM_WIDTH_93C46 6 +#define PCI_EEPROM_WIDTH_93C56 8 +#define PCI_EEPROM_WIDTH_93C66 8 +#define PCI_EEPROM_WIDTH_93C86 8 +#define PCI_EEPROM_WIDTH_OPCODE 3 +#define PCI_EEPROM_WRITE_OPCODE 0x05 +#define PCI_EEPROM_READ_OPCODE 0x06 +#define PCI_EEPROM_EWDS_OPCODE 0x10 +#define PCI_EEPROM_EWEN_OPCODE 0x13 + +/** + * struct eeprom_93cx6 - control structure for setting the commands + * for reading the eeprom data. + * @data: private pointer for the driver. + * @register_read(struct eeprom_93cx6 *eeprom): handler to + * read the eeprom register, this function should set all reg_* fields. + * @register_write(struct eeprom_93cx6 *eeprom): handler to + * write to the eeprom register by using all reg_* fields. + * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines + * @reg_data_in: register field to indicate data input + * @reg_data_out: register field to indicate data output + * @reg_data_clock: register field to set the data clock + * @reg_chip_select: register field to set the chip select + * + * This structure is used for the communication between the driver + * and the eeprom_93cx6 handlers for reading the eeprom. + */ +struct eeprom_93cx6 { + void *data; + + void (*register_read)(struct eeprom_93cx6 *eeprom); + void (*register_write)(struct eeprom_93cx6 *eeprom); + + int width; + + char reg_data_in; + char reg_data_out; + char reg_data_clock; + char reg_chip_select; +}; + +extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, + const u8 word, u16 *data); +extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, + const u8 word, __le16 *data, const u16 words); diff --git a/include/compat/linux/export.h b/include/compat/linux/export.h new file mode 100755 index 0000000..f7842b7 --- /dev/null +++ b/include/compat/linux/export.h @@ -0,0 +1,12 @@ +#ifndef _COMPAT_LINUX_EXPORT_H +#define _COMPAT_LINUX_EXPORT_H 1 + +#include + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) +#include_next +#else +#include +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) */ + +#endif /* _COMPAT_LINUX_EXPORT_H */ diff --git a/include/compat/linux/ieee80211.h b/include/compat/linux/ieee80211.h new file mode 100755 index 0000000..015bca2 --- /dev/null +++ b/include/compat/linux/ieee80211.h @@ -0,0 +1,1852 @@ +/* + * IEEE 802.11 defines + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef LINUX_IEEE80211_H +#define LINUX_IEEE80211_H + +#include +#include + +/* + * DS bit usage + * + * TA = transmitter address + * RA = receiver address + * DA = destination address + * SA = source address + * + * ToDS FromDS A1(RA) A2(TA) A3 A4 Use + * ----------------------------------------------------------------- + * 0 0 DA SA BSSID - IBSS/DLS + * 0 1 DA BSSID SA - AP -> STA + * 1 0 BSSID SA DA - AP <- STA + * 1 1 RA TA DA SA unspecified (WDS) + */ + +#define FCS_LEN 4 + +#define IEEE80211_FCTL_VERS 0x0003 +#define IEEE80211_FCTL_FTYPE 0x000c +#define IEEE80211_FCTL_STYPE 0x00f0 +#define IEEE80211_FCTL_TODS 0x0100 +#define IEEE80211_FCTL_FROMDS 0x0200 +#define IEEE80211_FCTL_MOREFRAGS 0x0400 +#define IEEE80211_FCTL_RETRY 0x0800 +#define IEEE80211_FCTL_PM 0x1000 +#define IEEE80211_FCTL_MOREDATA 0x2000 +#define IEEE80211_FCTL_PROTECTED 0x4000 +#define IEEE80211_FCTL_ORDER 0x8000 + +#define IEEE80211_SCTL_FRAG 0x000F +#define IEEE80211_SCTL_SEQ 0xFFF0 + +#define IEEE80211_FTYPE_MGMT 0x0000 +#define IEEE80211_FTYPE_CTL 0x0004 +#define IEEE80211_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE80211_STYPE_ASSOC_REQ 0x0000 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_REASSOC_REQ 0x0020 +#define IEEE80211_STYPE_REASSOC_RESP 0x0030 +#define IEEE80211_STYPE_PROBE_REQ 0x0040 +#define IEEE80211_STYPE_PROBE_RESP 0x0050 +#define IEEE80211_STYPE_BEACON 0x0080 +#define IEEE80211_STYPE_ATIM 0x0090 +#define IEEE80211_STYPE_DISASSOC 0x00A0 +#define IEEE80211_STYPE_AUTH 0x00B0 +#define IEEE80211_STYPE_DEAUTH 0x00C0 +#define IEEE80211_STYPE_ACTION 0x00D0 + +/* control */ +#define IEEE80211_STYPE_BACK_REQ 0x0080 +#define IEEE80211_STYPE_BACK 0x0090 +#define IEEE80211_STYPE_PSPOLL 0x00A0 +#define IEEE80211_STYPE_RTS 0x00B0 +#define IEEE80211_STYPE_CTS 0x00C0 +#define IEEE80211_STYPE_ACK 0x00D0 +#define IEEE80211_STYPE_CFEND 0x00E0 +#define IEEE80211_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE80211_STYPE_DATA 0x0000 +#define IEEE80211_STYPE_DATA_CFACK 0x0010 +#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 +#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE80211_STYPE_NULLFUNC 0x0040 +#define IEEE80211_STYPE_CFACK 0x0050 +#define IEEE80211_STYPE_CFPOLL 0x0060 +#define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 +#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 +#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 +#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 +#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 +#define IEEE80211_STYPE_QOS_CFACK 0x00D0 +#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 +#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 + + +/* miscellaneous IEEE 802.11 constants */ +#define IEEE80211_MAX_FRAG_THRESHOLD 2352 +#define IEEE80211_MAX_RTS_THRESHOLD 2353 +#define IEEE80211_MAX_AID 2007 +#define IEEE80211_MAX_TIM_LEN 251 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + 802.11e clarifies the figure in section 7.1.2. The frame body is + up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */ +#define IEEE80211_MAX_DATA_LEN 2304 +/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ +#define IEEE80211_MAX_FRAME_LEN 2352 + +#define IEEE80211_MAX_SSID_LEN 32 + +#define IEEE80211_MAX_MESH_ID_LEN 32 + +#define IEEE80211_QOS_CTL_LEN 2 +/* 1d tag mask */ +#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 +/* TID mask */ +#define IEEE80211_QOS_CTL_TID_MASK 0x000f +/* EOSP */ +#define IEEE80211_QOS_CTL_EOSP 0x0010 +/* ACK policy */ +#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020 +#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040 +#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 +#define IEEE80211_QOS_CTL_ACK_POLICY_MASK 0x0060 +/* A-MSDU 802.11n */ +#define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 +/* Mesh Control 802.11s */ +#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 + +/* U-APSD queue for WMM IEs sent by AP */ +#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) +#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f + +/* U-APSD queues for WMM IEs sent by STA */ +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI (1<<1) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK (1<<2) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE (1<<3) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK 0x0f + +/* U-APSD max SP length for WMM IEs sent by STA */ +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL 0x00 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2 0x01 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4 0x02 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6 0x03 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 + +#define IEEE80211_HT_CTL_LEN 4 + +struct ieee80211_hdr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; + u8 addr4[6]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; +} __attribute__ ((packed)); + +struct ieee80211_qos_hdr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; + __le16 qos_ctrl; +} __attribute__ ((packed)); + +/** + * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_tods(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0; +} + +/** + * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_fromds(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0; +} + +/** + * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_a4(__le16 fc) +{ + __le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); + return (fc & tmp) == tmp; +} + +/** + * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_morefrags(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0; +} + +/** + * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_retry(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0; +} + +/** + * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_pm(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0; +} + +/** + * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_moredata(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0; +} + +/** + * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_protected(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0; +} + +/** + * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_has_order(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0; +} + +/** + * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_mgmt(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT); +} + +/** + * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_ctl(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL); +} + +/** + * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA); +} + +/** + * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data_qos(__le16 fc) +{ + /* + * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need + * to check the one bit + */ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA); +} + +/** + * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_data_present(__le16 fc) +{ + /* + * mask with 0x40 and test that that bit is clear to only return true + * for the data-containing substypes. + */ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) == + cpu_to_le16(IEEE80211_FTYPE_DATA); +} + +/** + * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_assoc_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ); +} + +/** + * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_assoc_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP); +} + +/** + * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_reassoc_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ); +} + +/** + * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_reassoc_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP); +} + +/** + * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_probe_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ); +} + +/** + * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_probe_resp(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); +} + +/** + * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_beacon(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); +} + +/** + * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_atim(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM); +} + +/** + * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_disassoc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC); +} + +/** + * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_auth(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); +} + +/** + * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_deauth(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH); +} + +/** + * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_action(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION); +} + +/** + * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_back_req(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ); +} + +/** + * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_back(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK); +} + +/** + * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_pspoll(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); +} + +/** + * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_rts(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); +} + +/** + * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cts(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); +} + +/** + * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_ack(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK); +} + +/** + * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cfend(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND); +} + +/** + * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_cfendack(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK); +} + +/** + * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_nullfunc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC); +} + +/** + * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_qos_nullfunc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC); +} + +struct ieee80211s_hdr { + u8 flags; + u8 ttl; + __le32 seqnum; + u8 eaddr1[6]; + u8 eaddr2[6]; +} __attribute__ ((packed)); + +/* Mesh flags */ +#define MESH_FLAGS_AE_A4 0x1 +#define MESH_FLAGS_AE_A5_A6 0x2 +#define MESH_FLAGS_AE 0x3 +#define MESH_FLAGS_PS_DEEP 0x4 + +/** + * struct ieee80211_quiet_ie + * + * This structure refers to "Quiet information element" + */ +struct ieee80211_quiet_ie { + u8 count; + u8 period; + __le16 duration; + __le16 offset; +} __attribute__ ((packed)); + +/** + * struct ieee80211_msrment_ie + * + * This structure refers to "Measurement Request/Report information element" + */ +struct ieee80211_msrment_ie { + u8 token; + u8 mode; + u8 type; + u8 request[0]; +} __attribute__ ((packed)); + +/** + * struct ieee80211_channel_sw_ie + * + * This structure refers to "Channel Switch Announcement information element" + */ +struct ieee80211_channel_sw_ie { + u8 mode; + u8 new_ch_num; + u8 count; +} __attribute__ ((packed)); + +/** + * struct ieee80211_tim + * + * This structure refers to "Traffic Indication Map information element" + */ +struct ieee80211_tim_ie { + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + /* variable size: 1 - 251 bytes */ + u8 virtual_map[1]; +} __attribute__ ((packed)); + +/** + * struct ieee80211_meshconf_ie + * + * This structure refers to "Mesh Configuration information element" + */ +struct ieee80211_meshconf_ie { + u8 meshconf_psel; + u8 meshconf_pmetric; + u8 meshconf_congest; + u8 meshconf_synch; + u8 meshconf_auth; + u8 meshconf_form; + u8 meshconf_cap; +} __attribute__ ((packed)); + +/** + * struct ieee80211_rann_ie + * + * This structure refers to "Root Announcement information element" + */ +struct ieee80211_rann_ie { + u8 rann_flags; + u8 rann_hopcount; + u8 rann_ttl; + u8 rann_addr[6]; + u32 rann_seq; + u32 rann_interval; + u32 rann_metric; +} __attribute__ ((packed)); + +enum ieee80211_rann_flags { + RANN_FLAG_IS_GATE = 1 << 0, +}; + +#define WLAN_SA_QUERY_TR_ID_LEN 2 + +struct ieee80211_mgmt { + __le16 frame_control; + __le16 duration; + u8 da[6]; + u8 sa[6]; + u8 bssid[6]; + __le16 seq_ctrl; + union { + struct { + __le16 auth_alg; + __le16 auth_transaction; + __le16 status_code; + /* possibly followed by Challenge text */ + u8 variable[0]; + } __attribute__ ((packed)) auth; + struct { + __le16 reason_code; + } __attribute__ ((packed)) deauth; + struct { + __le16 capab_info; + __le16 listen_interval; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_req; + struct { + __le16 capab_info; + __le16 status_code; + __le16 aid; + /* followed by Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_resp, reassoc_resp; + struct { + __le16 capab_info; + __le16 listen_interval; + u8 current_ap[6]; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) reassoc_req; + struct { + __le16 reason_code; + } __attribute__ ((packed)) disassoc; + struct { + __le64 timestamp; + __le16 beacon_int; + __le16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params, TIM */ + u8 variable[0]; + } __attribute__ ((packed)) beacon; + struct { + /* only variable items: SSID, Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) probe_req; + struct { + __le64 timestamp; + __le16 beacon_int; + __le16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params */ + u8 variable[0]; + } __attribute__ ((packed)) probe_resp; + struct { + u8 category; + union { + struct { + u8 action_code; + u8 dialog_token; + u8 status_code; + u8 variable[0]; + } __attribute__ ((packed)) wme_action; + struct{ + u8 action_code; + u8 element_id; + u8 length; + struct ieee80211_channel_sw_ie sw_elem; + } __attribute__((packed)) chan_switch; + struct{ + u8 action_code; + u8 dialog_token; + u8 element_id; + u8 length; + struct ieee80211_msrment_ie msr_elem; + } __attribute__((packed)) measurement; + struct{ + u8 action_code; + u8 dialog_token; + __le16 capab; + __le16 timeout; + __le16 start_seq_num; + } __attribute__((packed)) addba_req; + struct{ + u8 action_code; + u8 dialog_token; + __le16 status; + __le16 capab; + __le16 timeout; + } __attribute__((packed)) addba_resp; + struct{ + u8 action_code; + __le16 params; + __le16 reason_code; + } __attribute__((packed)) delba; + struct { + u8 action_code; + u8 variable[0]; + } __attribute__((packed)) self_prot; + struct{ + u8 action_code; + u8 variable[0]; + } __attribute__((packed)) mesh_action; + struct { + u8 action; + u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; + } __attribute__ ((packed)) sa_query; + struct { + u8 action; + u8 smps_control; + } __attribute__ ((packed)) ht_smps; + struct { + u8 action_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed tdls_discover_resp; + } u; + } __attribute__ ((packed)) action; + } u; +} __attribute__ ((packed)); + +/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ +#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 + +/* mgmt header + 1 byte category code */ +#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) + + +/* Management MIC information element (IEEE 802.11w) */ +struct ieee80211_mmie { + u8 element_id; + u8 length; + __le16 key_id; + u8 sequence_number[6]; + u8 mic[8]; +} __attribute__ ((packed)); + +struct ieee80211_vendor_ie { + u8 element_id; + u8 len; + u8 oui[3]; + u8 oui_type; +} __packed; + +/* Control frames */ +struct ieee80211_rts { + __le16 frame_control; + __le16 duration; + u8 ra[6]; + u8 ta[6]; +} __attribute__ ((packed)); + +struct ieee80211_cts { + __le16 frame_control; + __le16 duration; + u8 ra[6]; +} __attribute__ ((packed)); + +struct ieee80211_pspoll { + __le16 frame_control; + __le16 aid; + u8 bssid[6]; + u8 ta[6]; +} __attribute__ ((packed)); + +/* TDLS */ + +/* Link-id information element */ +struct ieee80211_tdls_lnkie { + u8 ie_type; /* Link Identifier IE */ + u8 ie_len; + u8 bssid[6]; + u8 init_sta[6]; + u8 resp_sta[6]; +} __packed; + +struct ieee80211_tdls_data { + u8 da[6]; + u8 sa[6]; + __be16 ether_type; + u8 payload_type; + u8 category; + u8 action_code; + union { + struct { + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_req; + struct { + __le16 status_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_resp; + struct { + __le16 status_code; + u8 dialog_token; + u8 variable[0]; + } __packed setup_cfm; + struct { + __le16 reason_code; + u8 variable[0]; + } __packed teardown; + struct { + u8 dialog_token; + u8 variable[0]; + } __packed discover_req; + } u; +} __packed; + +/** + * struct ieee80211_bar - HT Block Ack Request + * + * This structure refers to "HT BlockAckReq" as + * described in 802.11n draft section 7.2.1.7.1 + */ +struct ieee80211_bar { + __le16 frame_control; + __le16 duration; + __u8 ra[6]; + __u8 ta[6]; + __le16 control; + __le16 start_seq_num; +} __attribute__((packed)); + +/* 802.11 BAR control masks */ +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - MCS information + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate. If set represents + * the highest supported RX data rate in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_params: TX parameters + */ +struct ieee80211_mcs_info { + u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __le16 rx_highest; + u8 tx_params; + u8 reserved[3]; +} __attribute__((packed)); + +/* 802.11n HT capability MSC set */ +#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff +#define IEEE80211_HT_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 +/* value 0 == 1 stream etc */ +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 +#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 +#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 + +/* + * 802.11n D5.0 20.3.5 / 20.6 says: + * - indices 0 to 7 and 32 are single spatial stream + * - 8 to 31 are multiple spatial streams using equal modulation + * [8..15 for two streams, 16..23 for three and 24..31 for four] + * - remainder are multiple spatial streams using unequal modulation + */ +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ + (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) + +/** + * struct ieee80211_ht_cap - HT capabilities + * + * This structure is the "HT capabilities element" as + * described in 802.11n D5.0 7.3.2.57 + */ +struct ieee80211_ht_cap { + __le16 cap_info; + u8 ampdu_params_info; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + + __le16 extended_ht_cap_info; + __le32 tx_BF_cap_info; + u8 antenna_selection_info; +} __attribute__ ((packed)); + +/* 802.11n HT capabilities masks (for cap_info) */ +#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 +#define IEEE80211_HT_CAP_GRN_FLD 0x0010 +#define IEEE80211_HT_CAP_SGI_20 0x0020 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_TX_STBC 0x0080 +#define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 +#define IEEE80211_HT_CAP_DELAY_BA 0x0400 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 +#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 + +/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ +#define IEEE80211_HT_EXT_CAP_PCO 0x0001 +#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 +#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 +#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 +#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 +#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 +#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 + +/* + * Maximum length of AMPDU that the STA can receive. + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_max_ampdu_length_exp { + IEEE80211_HT_MAX_AMPDU_8K = 0, + IEEE80211_HT_MAX_AMPDU_16K = 1, + IEEE80211_HT_MAX_AMPDU_32K = 2, + IEEE80211_HT_MAX_AMPDU_64K = 3 +}; + +#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 + +/* Minimum MPDU start spacing */ +enum ieee80211_min_mpdu_spacing { + IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ + IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ + IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ + IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ + IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ + IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ + IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ + IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ +}; + +/** + * struct ieee80211_ht_info - HT information + * + * This structure is the "HT information element" as + * described in 802.11n D5.0 7.3.2.58 + */ +struct ieee80211_ht_info { + u8 control_chan; + u8 ht_param; + __le16 operation_mode; + __le16 stbc_param; + u8 basic_set[16]; +} __attribute__ ((packed)); + +/* for ht_param */ +#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 +#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 +#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 +#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 +#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 + +/* for operation_mode */ +#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 +#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 +#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 +#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 + +/* for stbc_param */ +#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 +#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 +#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 +#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 +#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 +#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 + + +/* block-ack parameters */ +#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 +#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C +#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0 +#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 +#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 + +/* + * A-PMDU buffer sizes + * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) + */ +#define IEEE80211_MIN_AMPDU_BUF 0x8 +#define IEEE80211_MAX_AMPDU_BUF 0x40 + + +/* Spatial Multiplexing Power Save Modes (for capability) */ +#define WLAN_HT_CAP_SM_PS_STATIC 0 +#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 +#define WLAN_HT_CAP_SM_PS_INVALID 2 +#define WLAN_HT_CAP_SM_PS_DISABLED 3 + +/* for SM power control field lower two bits */ +#define WLAN_HT_SMPS_CONTROL_DISABLED 0 +#define WLAN_HT_SMPS_CONTROL_STATIC 1 +#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 + +/* Authentication algorithms */ +#define WLAN_AUTH_OPEN 0 +#define WLAN_AUTH_SHARED_KEY 1 +#define WLAN_AUTH_FT 2 +#define WLAN_AUTH_SAE 3 +#define WLAN_AUTH_LEAP 128 + +#define WLAN_AUTH_CHALLENGE_LEN 128 + +#define WLAN_CAPABILITY_ESS (1<<0) +#define WLAN_CAPABILITY_IBSS (1<<1) + +/* + * A mesh STA sets the ESS and IBSS capability bits to zero. + * however, this holds true for p2p probe responses (in the p2p_find + * phase) as well. + */ +#define WLAN_CAPABILITY_IS_STA_BSS(cap) \ + (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS))) + +#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) +#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) +#define WLAN_CAPABILITY_PRIVACY (1<<4) +#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) +#define WLAN_CAPABILITY_PBCC (1<<6) +#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) + +/* 802.11h */ +#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_QOS (1<<9) +#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) +#define WLAN_CAPABILITY_DSSS_OFDM (1<<13) +/* measurement */ +#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) +#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) +#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED (1<<2) + +#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 + + +/* 802.11g ERP information element */ +#define WLAN_ERP_NON_ERP_PRESENT (1<<0) +#define WLAN_ERP_USE_PROTECTION (1<<1) +#define WLAN_ERP_BARKER_PREAMBLE (1<<2) + +/* WLAN_ERP_BARKER_PREAMBLE values */ +enum { + WLAN_ERP_PREAMBLE_SHORT = 0, + WLAN_ERP_PREAMBLE_LONG = 1, +}; + +/* Status codes */ +enum ieee80211_statuscode { + WLAN_STATUS_SUCCESS = 0, + WLAN_STATUS_UNSPECIFIED_FAILURE = 1, + WLAN_STATUS_CAPS_UNSUPPORTED = 10, + WLAN_STATUS_REASSOC_NO_ASSOC = 11, + WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12, + WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13, + WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14, + WLAN_STATUS_CHALLENGE_FAIL = 15, + WLAN_STATUS_AUTH_TIMEOUT = 16, + WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17, + WLAN_STATUS_ASSOC_DENIED_RATES = 18, + /* 802.11b */ + WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19, + WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20, + WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21, + /* 802.11h */ + WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22, + WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23, + WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24, + /* 802.11g */ + WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, + WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, + /* 802.11w */ + WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30, + WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31, + /* 802.11i */ + WLAN_STATUS_INVALID_IE = 40, + WLAN_STATUS_INVALID_GROUP_CIPHER = 41, + WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42, + WLAN_STATUS_INVALID_AKMP = 43, + WLAN_STATUS_UNSUPP_RSN_VERSION = 44, + WLAN_STATUS_INVALID_RSN_IE_CAP = 45, + WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, + /* 802.11e */ + WLAN_STATUS_UNSPECIFIED_QOS = 32, + WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33, + WLAN_STATUS_ASSOC_DENIED_LOWACK = 34, + WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35, + WLAN_STATUS_REQUEST_DECLINED = 37, + WLAN_STATUS_INVALID_QOS_PARAM = 38, + WLAN_STATUS_CHANGE_TSPEC = 39, + WLAN_STATUS_WAIT_TS_DELAY = 47, + WLAN_STATUS_NO_DIRECT_LINK = 48, + WLAN_STATUS_STA_NOT_PRESENT = 49, + WLAN_STATUS_STA_NOT_QSTA = 50, + /* 802.11s */ + WLAN_STATUS_ANTI_CLOG_REQUIRED = 76, + WLAN_STATUS_FCG_NOT_SUPP = 78, + WLAN_STATUS_STA_NO_TBTT = 78, +}; + + +/* Reason codes */ +enum ieee80211_reasoncode { + WLAN_REASON_UNSPECIFIED = 1, + WLAN_REASON_PREV_AUTH_NOT_VALID = 2, + WLAN_REASON_DEAUTH_LEAVING = 3, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4, + WLAN_REASON_DISASSOC_AP_BUSY = 5, + WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6, + WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7, + WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8, + WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9, + /* 802.11h */ + WLAN_REASON_DISASSOC_BAD_POWER = 10, + WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11, + /* 802.11i */ + WLAN_REASON_INVALID_IE = 13, + WLAN_REASON_MIC_FAILURE = 14, + WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, + WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16, + WLAN_REASON_IE_DIFFERENT = 17, + WLAN_REASON_INVALID_GROUP_CIPHER = 18, + WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19, + WLAN_REASON_INVALID_AKMP = 20, + WLAN_REASON_UNSUPP_RSN_VERSION = 21, + WLAN_REASON_INVALID_RSN_IE_CAP = 22, + WLAN_REASON_IEEE8021X_FAILED = 23, + WLAN_REASON_CIPHER_SUITE_REJECTED = 24, + /* 802.11e */ + WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, + WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, + WLAN_REASON_DISASSOC_LOW_ACK = 34, + WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35, + WLAN_REASON_QSTA_LEAVE_QBSS = 36, + WLAN_REASON_QSTA_NOT_USE = 37, + WLAN_REASON_QSTA_REQUIRE_SETUP = 38, + WLAN_REASON_QSTA_TIMEOUT = 39, + WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45, + /* 802.11s */ + WLAN_REASON_MESH_PEER_CANCELED = 52, + WLAN_REASON_MESH_MAX_PEERS = 53, + WLAN_REASON_MESH_CONFIG = 54, + WLAN_REASON_MESH_CLOSE = 55, + WLAN_REASON_MESH_MAX_RETRIES = 56, + WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57, + WLAN_REASON_MESH_INVALID_GTK = 58, + WLAN_REASON_MESH_INCONSISTENT_PARAM = 59, + WLAN_REASON_MESH_INVALID_SECURITY = 60, + WLAN_REASON_MESH_PATH_ERROR = 61, + WLAN_REASON_MESH_PATH_NOFORWARD = 62, + WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63, + WLAN_REASON_MAC_EXISTS_IN_MBSS = 64, + WLAN_REASON_MESH_CHAN_REGULATORY = 65, + WLAN_REASON_MESH_CHAN = 66, +}; + + +/* Information Element IDs */ +enum ieee80211_eid { + WLAN_EID_SSID = 0, + WLAN_EID_SUPP_RATES = 1, + WLAN_EID_FH_PARAMS = 2, + WLAN_EID_DS_PARAMS = 3, + WLAN_EID_CF_PARAMS = 4, + WLAN_EID_TIM = 5, + WLAN_EID_IBSS_PARAMS = 6, + WLAN_EID_CHALLENGE = 16, + + WLAN_EID_COUNTRY = 7, + WLAN_EID_HP_PARAMS = 8, + WLAN_EID_HP_TABLE = 9, + WLAN_EID_REQUEST = 10, + + WLAN_EID_QBSS_LOAD = 11, + WLAN_EID_EDCA_PARAM_SET = 12, + WLAN_EID_TSPEC = 13, + WLAN_EID_TCLAS = 14, + WLAN_EID_SCHEDULE = 15, + WLAN_EID_TS_DELAY = 43, + WLAN_EID_TCLAS_PROCESSING = 44, + WLAN_EID_QOS_CAPA = 46, + /* 802.11z */ + WLAN_EID_LINK_ID = 101, + /* 802.11s */ + WLAN_EID_MESH_CONFIG = 113, + WLAN_EID_MESH_ID = 114, + WLAN_EID_LINK_METRIC_REPORT = 115, + WLAN_EID_CONGESTION_NOTIFICATION = 116, + WLAN_EID_PEER_MGMT = 117, + WLAN_EID_CHAN_SWITCH_PARAM = 118, + WLAN_EID_MESH_AWAKE_WINDOW = 119, + WLAN_EID_BEACON_TIMING = 120, + WLAN_EID_MCCAOP_SETUP_REQ = 121, + WLAN_EID_MCCAOP_SETUP_RESP = 122, + WLAN_EID_MCCAOP_ADVERT = 123, + WLAN_EID_MCCAOP_TEARDOWN = 124, + WLAN_EID_GANN = 125, + WLAN_EID_RANN = 126, + WLAN_EID_PREQ = 130, + WLAN_EID_PREP = 131, + WLAN_EID_PERR = 132, + WLAN_EID_PXU = 137, + WLAN_EID_PXUC = 138, + WLAN_EID_AUTH_MESH_PEER_EXCH = 139, + WLAN_EID_MIC = 140, + + WLAN_EID_PWR_CONSTRAINT = 32, + WLAN_EID_PWR_CAPABILITY = 33, + WLAN_EID_TPC_REQUEST = 34, + WLAN_EID_TPC_REPORT = 35, + WLAN_EID_SUPPORTED_CHANNELS = 36, + WLAN_EID_CHANNEL_SWITCH = 37, + WLAN_EID_MEASURE_REQUEST = 38, + WLAN_EID_MEASURE_REPORT = 39, + WLAN_EID_QUIET = 40, + WLAN_EID_IBSS_DFS = 41, + + WLAN_EID_ERP_INFO = 42, + WLAN_EID_EXT_SUPP_RATES = 50, + + WLAN_EID_HT_CAPABILITY = 45, + WLAN_EID_HT_INFORMATION = 61, + + WLAN_EID_RSN = 48, + WLAN_EID_MMIE = 76, + WLAN_EID_WPA = 221, + WLAN_EID_GENERIC = 221, + WLAN_EID_VENDOR_SPECIFIC = 221, + WLAN_EID_QOS_PARAMETER = 222, + + WLAN_EID_AP_CHAN_REPORT = 51, + WLAN_EID_NEIGHBOR_REPORT = 52, + WLAN_EID_RCPI = 53, + WLAN_EID_BSS_AVG_ACCESS_DELAY = 63, + WLAN_EID_ANTENNA_INFO = 64, + WLAN_EID_RSNI = 65, + WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66, + WLAN_EID_BSS_AVAILABLE_CAPACITY = 67, + WLAN_EID_BSS_AC_ACCESS_DELAY = 68, + WLAN_EID_RRM_ENABLED_CAPABILITIES = 70, + WLAN_EID_MULTIPLE_BSSID = 71, + WLAN_EID_BSS_COEX_2040 = 72, + WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74, + WLAN_EID_EXT_CAPABILITY = 127, + + WLAN_EID_MOBILITY_DOMAIN = 54, + WLAN_EID_FAST_BSS_TRANSITION = 55, + WLAN_EID_TIMEOUT_INTERVAL = 56, + WLAN_EID_RIC_DATA = 57, + WLAN_EID_RIC_DESCRIPTOR = 75, + + WLAN_EID_DSE_REGISTERED_LOCATION = 58, + WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, + WLAN_EID_EXT_CHANSWITCH_ANN = 60, +}; + +/* Action category code */ +enum ieee80211_category { + WLAN_CATEGORY_SPECTRUM_MGMT = 0, + WLAN_CATEGORY_QOS = 1, + WLAN_CATEGORY_DLS = 2, + WLAN_CATEGORY_BACK = 3, + WLAN_CATEGORY_PUBLIC = 4, + WLAN_CATEGORY_HT = 7, + WLAN_CATEGORY_SA_QUERY = 8, + WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, + WLAN_CATEGORY_TDLS = 12, + WLAN_CATEGORY_MESH_ACTION = 13, + WLAN_CATEGORY_MULTIHOP_ACTION = 14, + WLAN_CATEGORY_SELF_PROTECTED = 15, + WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, + WLAN_CATEGORY_VENDOR_SPECIFIC = 127, +}; + +/* SPECTRUM_MGMT action code */ +enum ieee80211_spectrum_mgmt_actioncode { + WLAN_ACTION_SPCT_MSR_REQ = 0, + WLAN_ACTION_SPCT_MSR_RPRT = 1, + WLAN_ACTION_SPCT_TPC_REQ = 2, + WLAN_ACTION_SPCT_TPC_RPRT = 3, + WLAN_ACTION_SPCT_CHL_SWITCH = 4, +}; + +/* HT action codes */ +enum ieee80211_ht_actioncode { + WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, + WLAN_HT_ACTION_SMPS = 1, + WLAN_HT_ACTION_PSMP = 2, + WLAN_HT_ACTION_PCO_PHASE = 3, + WLAN_HT_ACTION_CSI = 4, + WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, + WLAN_HT_ACTION_COMPRESSED_BF = 6, + WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, +}; + +/* Self Protected Action codes */ +enum ieee80211_self_protected_actioncode { + WLAN_SP_RESERVED = 0, + WLAN_SP_MESH_PEERING_OPEN = 1, + WLAN_SP_MESH_PEERING_CONFIRM = 2, + WLAN_SP_MESH_PEERING_CLOSE = 3, + WLAN_SP_MGK_INFORM = 4, + WLAN_SP_MGK_ACK = 5, +}; + +/* Mesh action codes */ +enum ieee80211_mesh_actioncode { + WLAN_MESH_ACTION_LINK_METRIC_REPORT, + WLAN_MESH_ACTION_HWMP_PATH_SELECTION, + WLAN_MESH_ACTION_GATE_ANNOUNCEMENT, + WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION, + WLAN_MESH_ACTION_MCCA_SETUP_REQUEST, + WLAN_MESH_ACTION_MCCA_SETUP_REPLY, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT, + WLAN_MESH_ACTION_MCCA_TEARDOWN, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE, +}; + +/* Security key length */ +enum ieee80211_key_len { + WLAN_KEY_LEN_WEP40 = 5, + WLAN_KEY_LEN_WEP104 = 13, + WLAN_KEY_LEN_CCMP = 16, + WLAN_KEY_LEN_TKIP = 32, + WLAN_KEY_LEN_AES_CMAC = 16, +}; + +/* Public action codes */ +enum ieee80211_pub_actioncode { + WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, +}; + +/* TDLS action codes */ +enum ieee80211_tdls_actioncode { + WLAN_TDLS_SETUP_REQUEST = 0, + WLAN_TDLS_SETUP_RESPONSE = 1, + WLAN_TDLS_SETUP_CONFIRM = 2, + WLAN_TDLS_TEARDOWN = 3, + WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4, + WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5, + WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6, + WLAN_TDLS_PEER_PSM_REQUEST = 7, + WLAN_TDLS_PEER_PSM_RESPONSE = 8, + WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9, + WLAN_TDLS_DISCOVERY_REQUEST = 10, +}; + +/* + * TDLS capabililites to be enabled in the 5th byte of the + * @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) +#define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) + +/* TDLS specific payload type in the LLC/SNAP header */ +#define WLAN_TDLS_SNAP_RFTYPE 0x2 + +/** + * enum - mesh path selection protocol identifier + * + * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol + * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will + * be specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_PROTOCOL_HWMP = 0, + IEEE80211_PATH_PROTOCOL_VENDOR = 255, +}; + +/** + * enum - mesh path selection metric identifier + * + * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric + * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be + * specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_METRIC_AIRTIME = 0, + IEEE80211_PATH_METRIC_VENDOR = 255, +}; + + +/* + * IEEE 802.11-2007 7.3.2.9 Country information element + * + * Minimum length is 8 octets, ie len must be evenly + * divisible by 2 + */ + +/* Although the spec says 8 I'm seeing 6 in practice */ +#define IEEE80211_COUNTRY_IE_MIN_LEN 6 + +/* The Country String field of the element shall be 3 octets in length */ +#define IEEE80211_COUNTRY_STRING_LEN 3 + +/* + * For regulatory extension stuff see IEEE 802.11-2007 + * Annex I (page 1141) and Annex J (page 1147). Also + * review 7.3.2.9. + * + * When dot11RegulatoryClassesRequired is true and the + * first_channel/reg_extension_id is >= 201 then the IE + * compromises of the 'ext' struct represented below: + * + * - Regulatory extension ID - when generating IE this just needs + * to be monotonically increasing for each triplet passed in + * the IE + * - Regulatory class - index into set of rules + * - Coverage class - index into air propagation time (Table 7-27), + * in microseconds, you can compute the air propagation time from + * the index by multiplying by 3, so index 10 yields a propagation + * of 10 us. Valid values are 0-31, values 32-255 are not defined + * yet. A value of 0 inicates air propagation of <= 1 us. + * + * See also Table I.2 for Emission limit sets and table + * I.3 for Behavior limit sets. Table J.1 indicates how to map + * a reg_class to an emission limit set and behavior limit set. + */ +#define IEEE80211_COUNTRY_EXTENSION_ID 201 + +/* + * Channels numbers in the IE must be monotonically increasing + * if dot11RegulatoryClassesRequired is not true. + * + * If dot11RegulatoryClassesRequired is true consecutive + * subband triplets following a regulatory triplet shall + * have monotonically increasing first_channel number fields. + * + * Channel numbers shall not overlap. + * + * Note that max_power is signed. + */ +struct ieee80211_country_ie_triplet { + union { + struct { + u8 first_channel; + u8 num_channels; + s8 max_power; + } __attribute__ ((packed)) chans; + struct { + u8 reg_extension_id; + u8 reg_class; + u8 coverage_class; + } __attribute__ ((packed)) ext; + }; +} __attribute__ ((packed)); + +enum ieee80211_timeout_interval_type { + WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, + WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */, + WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, +}; + +/* BACK action code */ +enum ieee80211_back_actioncode { + WLAN_ACTION_ADDBA_REQ = 0, + WLAN_ACTION_ADDBA_RESP = 1, + WLAN_ACTION_DELBA = 2, +}; + +/* BACK (block-ack) parties */ +enum ieee80211_back_parties { + WLAN_BACK_RECIPIENT = 0, + WLAN_BACK_INITIATOR = 1, +}; + +/* SA Query action */ +enum ieee80211_sa_query_action { + WLAN_ACTION_SA_QUERY_REQUEST = 0, + WLAN_ACTION_SA_QUERY_RESPONSE = 1, +}; + + +/* cipher suite selectors */ +#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00 +#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01 +#define WLAN_CIPHER_SUITE_TKIP 0x000FAC02 +/* reserved: 0x000FAC03 */ +#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 +#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 +#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 + +#define WLAN_CIPHER_SUITE_SMS4 0x00147201 + +/* AKM suite selectors */ +#define WLAN_AKM_SUITE_8021X 0x000FAC01 +#define WLAN_AKM_SUITE_PSK 0x000FAC02 +#define WLAN_AKM_SUITE_SAE 0x000FAC08 +#define WLAN_AKM_SUITE_FT_OVER_SAE 0x000FAC09 + +#define WLAN_MAX_KEY_LEN 32 + +#define WLAN_PMKID_LEN 16 + +#define WLAN_OUI_WFA 0x506f9a +#define WLAN_OUI_TYPE_WFA_P2P 9 + +/* + * WMM/802.11e Tspec Element + */ +#define IEEE80211_WMM_IE_TSPEC_TID_MASK 0x0F +#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT 1 + +enum ieee80211_tspec_status_code { + IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0, + IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1, +}; + +struct ieee80211_tspec_ie { + u8 element_id; + u8 len; + u8 oui[3]; + u8 oui_type; + u8 oui_subtype; + u8 version; + __le16 tsinfo; + u8 tsinfo_resvd; + __le16 nominal_msdu; + __le16 max_msdu; + __le32 min_service_int; + __le32 max_service_int; + __le32 inactivity_int; + __le32 suspension_int; + __le32 service_start_time; + __le32 min_data_rate; + __le32 mean_data_rate; + __le32 peak_data_rate; + __le32 max_burst_size; + __le32 delay_bound; + __le32 min_phy_rate; + __le16 sba; + __le16 medium_time; +} __packed; + +/** + * ieee80211_get_qos_ctl - get pointer to qos control bytes + * @hdr: the frame + * + * The qos ctrl bytes come after the frame_control, duration, seq_num + * and 3 or 4 addresses of length ETH_ALEN. + * 3 addr: 2 + 2 + 2 + 3*6 = 24 + * 4 addr: 2 + 2 + 2 + 4*6 = 30 + */ +static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr) +{ + if (ieee80211_has_a4(hdr->frame_control)) + return (u8 *)hdr + 30; + else + return (u8 *)hdr + 24; +} + +/** + * ieee80211_get_SA - get pointer to SA + * @hdr: the frame + * + * Given an 802.11 frame, this function returns the offset + * to the source address (SA). It does not verify that the + * header is long enough to contain the address, and the + * header must be long enough to contain the frame control + * field. + */ +static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) +{ + if (ieee80211_has_a4(hdr->frame_control)) + return hdr->addr4; + if (ieee80211_has_fromds(hdr->frame_control)) + return hdr->addr3; + return hdr->addr2; +} + +/** + * ieee80211_get_DA - get pointer to DA + * @hdr: the frame + * + * Given an 802.11 frame, this function returns the offset + * to the destination address (DA). It does not verify that + * the header is long enough to contain the address, and the + * header must be long enough to contain the frame control + * field. + */ +static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) +{ + if (ieee80211_has_tods(hdr->frame_control)) + return hdr->addr3; + else + return hdr->addr1; +} + +/** + * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame + * @hdr: the frame (buffer must include at least the first octet of payload) + */ +static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) +{ + if (ieee80211_is_disassoc(hdr->frame_control) || + ieee80211_is_deauth(hdr->frame_control)) + return true; + + if (ieee80211_is_action(hdr->frame_control)) { + u8 *category; + + /* + * Action frames, excluding Public Action frames, are Robust + * Management Frames. However, if we are looking at a Protected + * frame, skip the check since the data may be encrypted and + * the frame has already been found to be a Robust Management + * Frame (by the other end). + */ + if (ieee80211_has_protected(hdr->frame_control)) + return true; + category = ((u8 *) hdr) + 24; + return *category != WLAN_CATEGORY_PUBLIC && + *category != WLAN_CATEGORY_HT && + *category != WLAN_CATEGORY_SELF_PROTECTED && + *category != WLAN_CATEGORY_VENDOR_SPECIFIC; + } + + return false; +} + +/** + * ieee80211_fhss_chan_to_freq - get channel frequency + * @channel: the FHSS channel + * + * Convert IEEE802.11 FHSS channel to frequency (MHz) + * Ref IEEE 802.11-2007 section 14.6 + */ +static inline int ieee80211_fhss_chan_to_freq(int channel) +{ + if ((channel > 1) && (channel < 96)) + return channel + 2400; + else + return -1; +} + +/** + * ieee80211_freq_to_fhss_chan - get channel + * @freq: the channels frequency + * + * Convert frequency (MHz) to IEEE802.11 FHSS channel + * Ref IEEE 802.11-2007 section 14.6 + */ +static inline int ieee80211_freq_to_fhss_chan(int freq) +{ + if ((freq > 2401) && (freq < 2496)) + return freq - 2400; + else + return -1; +} + +/** + * ieee80211_dsss_chan_to_freq - get channel center frequency + * @channel: the DSSS channel + * + * Convert IEEE802.11 DSSS channel to the center frequency (MHz). + * Ref IEEE 802.11-2007 section 15.6 + */ +static inline int ieee80211_dsss_chan_to_freq(int channel) +{ + if ((channel > 0) && (channel < 14)) + return 2407 + (channel * 5); + else if (channel == 14) + return 2484; + else + return -1; +} + +/** + * ieee80211_freq_to_dsss_chan - get channel + * @freq: the frequency + * + * Convert frequency (MHz) to IEEE802.11 DSSS channel + * Ref IEEE 802.11-2007 section 15.6 + * + * This routine selects the channel with the closest center frequency. + */ +static inline int ieee80211_freq_to_dsss_chan(int freq) +{ + if ((freq >= 2410) && (freq < 2475)) + return (freq - 2405) / 5; + else if ((freq >= 2482) && (freq < 2487)) + return 14; + else + return -1; +} + +/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back + * Ref IEEE 802.11-2007 section 18.4.6.2 + * + * The channels and frequencies are the same as those defined for DSSS + */ +#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan) +#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq) + +/* Convert IEEE802.11 ERP channel to frequency (MHz) and back + * Ref IEEE 802.11-2007 section 19.4.2 + */ +#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan) +#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq) + +/** + * ieee80211_ofdm_chan_to_freq - get channel center frequency + * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz + * @channel: the OFDM channel + * + * Convert IEEE802.11 OFDM channel to center frequency (MHz) + * Ref IEEE 802.11-2007 section 17.3.8.3.2 + */ +static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel) +{ + if ((channel > 0) && (channel <= 200) && + (s_freq >= 4000)) + return s_freq + (channel * 5); + else + return -1; +} + +/** + * ieee80211_freq_to_ofdm_channel - get channel + * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz + * @freq: the frequency + * + * Convert frequency (MHz) to IEEE802.11 OFDM channel + * Ref IEEE 802.11-2007 section 17.3.8.3.2 + * + * This routine selects the channel with the closest center frequency. + */ +static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq) +{ + if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) && + (s_freq >= 4000)) + return (freq + 2 - s_freq) / 5; + else + return -1; +} + +/** + * ieee80211_tu_to_usec - convert time units (TU) to microseconds + * @tu: the TUs + */ +static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) +{ + return 1024 * tu; +} + +/** + * ieee80211_check_tim - check if AID bit is set in TIM + * @tim: the TIM IE + * @tim_len: length of the TIM IE + * @aid: the AID to look for + */ +static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, + u8 tim_len, u16 aid) +{ + u8 mask; + u8 index, indexn1, indexn2; + + if (unlikely(!tim || tim_len < sizeof(*tim))) + return false; + + aid &= 0x3fff; + index = aid / 8; + mask = 1 << (aid & 7); + + indexn1 = tim->bitmap_ctrl & 0xfe; + indexn2 = tim_len + indexn1 - 4; + + if (index < indexn1 || index > indexn2) + return false; + + index -= indexn1; + + return !!(tim->virtual_map[index] & mask); +} + +#endif /* LINUX_IEEE80211_H */ diff --git a/include/compat/linux/kfifo.h b/include/compat/linux/kfifo.h new file mode 100755 index 0000000..e30bb54 --- /dev/null +++ b/include/compat/linux/kfifo.h @@ -0,0 +1,857 @@ +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) +#include_next +#else +/* + * A generic kernel FIFO implementation + * + * Copyright (C) 2009/2010 Stefani Seibold + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LINUX_KFIFO_H +#define _LINUX_KFIFO_H + +/* + * How to porting drivers to the new generic FIFO API: + * + * - Modify the declaration of the "struct kfifo *" object into a + * in-place "struct kfifo" object + * - Init the in-place object with kfifo_alloc() or kfifo_init() + * Note: The address of the in-place "struct kfifo" object must be + * passed as the first argument to this functions + * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get + * into kfifo_out + * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get + * into kfifo_out_spinlocked + * Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc + * must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked + * as the last parameter + * - The formerly __kfifo_* functions are renamed into kfifo_* + */ + +/* + * Note about locking : There is no locking required until only * one reader + * and one writer is using the fifo and no kfifo_reset() will be * called + * kfifo_reset_out() can be safely used, until it will be only called + * in the reader thread. + * For multiple writer and one reader there is only a need to lock the writer. + * And vice versa for only one writer and multiple reader there is only a need + * to lock the reader. + */ + +#include +#include +#include +#include + +struct __kfifo { + unsigned int in; + unsigned int out; + unsigned int mask; + unsigned int esize; + void *data; +}; + +#define __STRUCT_KFIFO_COMMON(datatype, recsize, ptrtype) \ + union { \ + struct __kfifo kfifo; \ + datatype *type; \ + char (*rectype)[recsize]; \ + ptrtype *ptr; \ + const ptrtype *ptr_const; \ + } + +#define __STRUCT_KFIFO(type, size, recsize, ptrtype) \ +{ \ + __STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \ + type buf[((size < 2) || (size & (size - 1))) ? -1 : size]; \ +} + +#define STRUCT_KFIFO(type, size) \ + struct __STRUCT_KFIFO(type, size, 0, type) + +#define __STRUCT_KFIFO_PTR(type, recsize, ptrtype) \ +{ \ + __STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \ + type buf[0]; \ +} + +#define STRUCT_KFIFO_PTR(type) \ + struct __STRUCT_KFIFO_PTR(type, 0, type) + +/* + * define compatibility "struct kfifo" for dynamic allocated fifos + */ +struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void); + +#define STRUCT_KFIFO_REC_1(size) \ + struct __STRUCT_KFIFO(unsigned char, size, 1, void) + +#define STRUCT_KFIFO_REC_2(size) \ + struct __STRUCT_KFIFO(unsigned char, size, 2, void) + +/* + * define kfifo_rec types + */ +struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void); +struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void); + +/* + * helper macro to distinguish between real in place fifo where the fifo + * array is a part of the structure and the fifo type where the array is + * outside of the fifo structure. + */ +#define __is_kfifo_ptr(fifo) (sizeof(*fifo) == sizeof(struct __kfifo)) + +/** + * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object + * @fifo: name of the declared fifo + * @type: type of the fifo elements + */ +#define DECLARE_KFIFO_PTR(fifo, type) STRUCT_KFIFO_PTR(type) fifo + +/** + * DECLARE_KFIFO - macro to declare a fifo object + * @fifo: name of the declared fifo + * @type: type of the fifo elements + * @size: the number of elements in the fifo, this must be a power of 2 + */ +#define DECLARE_KFIFO(fifo, type, size) STRUCT_KFIFO(type, size) fifo + +/** + * INIT_KFIFO - Initialize a fifo declared by DECLARE_KFIFO + * @fifo: name of the declared fifo datatype + */ +#define INIT_KFIFO(fifo) \ +(void)({ \ + typeof(&(fifo)) __tmp = &(fifo); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + __kfifo->in = 0; \ + __kfifo->out = 0; \ + __kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\ + __kfifo->esize = sizeof(*__tmp->buf); \ + __kfifo->data = __is_kfifo_ptr(__tmp) ? NULL : __tmp->buf; \ +}) + +/** + * DEFINE_KFIFO - macro to define and initialize a fifo + * @fifo: name of the declared fifo datatype + * @type: type of the fifo elements + * @size: the number of elements in the fifo, this must be a power of 2 + * + * Note: the macro can be used for global and local fifo data type variables. + */ +#define DEFINE_KFIFO(fifo, type, size) \ + DECLARE_KFIFO(fifo, type, size) = \ + (typeof(fifo)) { \ + { \ + { \ + .in = 0, \ + .out = 0, \ + .mask = __is_kfifo_ptr(&(fifo)) ? \ + 0 : \ + ARRAY_SIZE((fifo).buf) - 1, \ + .esize = sizeof(*(fifo).buf), \ + .data = __is_kfifo_ptr(&(fifo)) ? \ + NULL : \ + (fifo).buf, \ + } \ + } \ + } + + +static inline unsigned int __must_check +__kfifo_uint_must_check_helper(unsigned int val) +{ + return val; +} + +static inline int __must_check +__kfifo_int_must_check_helper(int val) +{ + return val; +} + +/** + * kfifo_initialized - Check if the fifo is initialized + * @fifo: address of the fifo to check + * + * Return %true if fifo is initialized, otherwise %false. + * Assumes the fifo was 0 before. + */ +#define kfifo_initialized(fifo) ((fifo)->kfifo.mask) + +/** + * kfifo_esize - returns the size of the element managed by the fifo + * @fifo: address of the fifo to be used + */ +#define kfifo_esize(fifo) ((fifo)->kfifo.esize) + +/** + * kfifo_recsize - returns the size of the record length field + * @fifo: address of the fifo to be used + */ +#define kfifo_recsize(fifo) (sizeof(*(fifo)->rectype)) + +/** + * kfifo_size - returns the size of the fifo in elements + * @fifo: address of the fifo to be used + */ +#define kfifo_size(fifo) ((fifo)->kfifo.mask + 1) + +/** + * kfifo_reset - removes the entire fifo content + * @fifo: address of the fifo to be used + * + * Note: usage of kfifo_reset() is dangerous. It should be only called when the + * fifo is exclusived locked or when it is secured that no other thread is + * accessing the fifo. + */ +#define kfifo_reset(fifo) \ +(void)({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + __tmp->kfifo.in = __tmp->kfifo.out = 0; \ +}) + +/** + * kfifo_reset_out - skip fifo content + * @fifo: address of the fifo to be used + * + * Note: The usage of kfifo_reset_out() is safe until it will be only called + * from the reader thread and there is only one concurrent reader. Otherwise + * it is dangerous and must be handled in the same way as kfifo_reset(). + */ +#define kfifo_reset_out(fifo) \ +(void)({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + __tmp->kfifo.out = __tmp->kfifo.in; \ +}) + +/** + * kfifo_len - returns the number of used elements in the fifo + * @fifo: address of the fifo to be used + */ +#define kfifo_len(fifo) \ +({ \ + typeof((fifo) + 1) __tmpl = (fifo); \ + __tmpl->kfifo.in - __tmpl->kfifo.out; \ +}) + +/** + * kfifo_is_empty - returns true if the fifo is empty + * @fifo: address of the fifo to be used + */ +#define kfifo_is_empty(fifo) \ +({ \ + typeof((fifo) + 1) __tmpq = (fifo); \ + __tmpq->kfifo.in == __tmpq->kfifo.out; \ +}) + +/** + * kfifo_is_full - returns true if the fifo is full + * @fifo: address of the fifo to be used + */ +#define kfifo_is_full(fifo) \ +({ \ + typeof((fifo) + 1) __tmpq = (fifo); \ + kfifo_len(__tmpq) > __tmpq->kfifo.mask; \ +}) + +/** + * kfifo_avail - returns the number of unused elements in the fifo + * @fifo: address of the fifo to be used + */ +#define kfifo_avail(fifo) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmpq = (fifo); \ + const size_t __recsize = sizeof(*__tmpq->rectype); \ + unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \ + (__recsize) ? ((__avail <= __recsize) ? 0 : \ + __kfifo_max_r(__avail - __recsize, __recsize)) : \ + __avail; \ +}) \ +) + +/** + * kfifo_skip - skip output data + * @fifo: address of the fifo to be used + */ +#define kfifo_skip(fifo) \ +(void)({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (__recsize) \ + __kfifo_skip_r(__kfifo, __recsize); \ + else \ + __kfifo->out++; \ +}) + +/** + * kfifo_peek_len - gets the size of the next fifo record + * @fifo: address of the fifo to be used + * + * This function returns the size of the next fifo record in number of bytes. + */ +#define kfifo_peek_len(fifo) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + (!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \ + __kfifo_len_r(__kfifo, __recsize); \ +}) \ +) + +/** + * kfifo_alloc - dynamically allocates a new fifo buffer + * @fifo: pointer to the fifo + * @size: the number of elements in the fifo, this must be a power of 2 + * @gfp_mask: get_free_pages mask, passed to kmalloc() + * + * This macro dynamically allocates a new fifo buffer. + * + * The numer of elements will be rounded-up to a power of 2. + * The fifo will be release with kfifo_free(). + * Return 0 if no error, otherwise an error code. + */ +#define kfifo_alloc(fifo, size, gfp_mask) \ +__kfifo_int_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + __is_kfifo_ptr(__tmp) ? \ + __kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \ + -EINVAL; \ +}) \ +) + +/** + * kfifo_free - frees the fifo + * @fifo: the fifo to be freed + */ +#define kfifo_free(fifo) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (__is_kfifo_ptr(__tmp)) \ + __kfifo_free(__kfifo); \ +}) + +/** + * kfifo_init - initialize a fifo using a preallocated buffer + * @fifo: the fifo to assign the buffer + * @buffer: the preallocated buffer to be used + * @size: the size of the internal buffer, this have to be a power of 2 + * + * This macro initialize a fifo using a preallocated buffer. + * + * The numer of elements will be rounded-up to a power of 2. + * Return 0 if no error, otherwise an error code. + */ +#define kfifo_init(fifo, buffer, size) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + __is_kfifo_ptr(__tmp) ? \ + __kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \ + -EINVAL; \ +}) + +/** + * kfifo_put - put data into the fifo + * @fifo: address of the fifo to be used + * @val: the data to be added + * + * This macro copies the given value into the fifo. + * It returns 0 if the fifo was full. Otherwise it returns the number + * processed elements. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_put(fifo, val) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((val) + 1) __val = (val); \ + unsigned int __ret; \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) { \ + typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \ + __dummy = (typeof(__val))NULL; \ + } \ + if (__recsize) \ + __ret = __kfifo_in_r(__kfifo, __val, sizeof(*__val), \ + __recsize); \ + else { \ + __ret = !kfifo_is_full(__tmp); \ + if (__ret) { \ + (__is_kfifo_ptr(__tmp) ? \ + ((typeof(__tmp->type))__kfifo->data) : \ + (__tmp->buf) \ + )[__kfifo->in & __tmp->kfifo.mask] = \ + *(typeof(__tmp->type))__val; \ + smp_wmb(); \ + __kfifo->in++; \ + } \ + } \ + __ret; \ +}) + +/** + * kfifo_get - get data from the fifo + * @fifo: address of the fifo to be used + * @val: the var where to store the data to be added + * + * This macro reads the data from the fifo. + * It returns 0 if the fifo was empty. Otherwise it returns the number + * processed elements. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_get(fifo, val) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((val) + 1) __val = (val); \ + unsigned int __ret; \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) \ + __val = (typeof(__tmp->ptr))0; \ + if (__recsize) \ + __ret = __kfifo_out_r(__kfifo, __val, sizeof(*__val), \ + __recsize); \ + else { \ + __ret = !kfifo_is_empty(__tmp); \ + if (__ret) { \ + *(typeof(__tmp->type))__val = \ + (__is_kfifo_ptr(__tmp) ? \ + ((typeof(__tmp->type))__kfifo->data) : \ + (__tmp->buf) \ + )[__kfifo->out & __tmp->kfifo.mask]; \ + smp_wmb(); \ + __kfifo->out++; \ + } \ + } \ + __ret; \ +}) \ +) + +/** + * kfifo_peek - get data from the fifo without removing + * @fifo: address of the fifo to be used + * @val: the var where to store the data to be added + * + * This reads the data from the fifo without removing it from the fifo. + * It returns 0 if the fifo was empty. Otherwise it returns the number + * processed elements. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_peek(fifo, val) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((val) + 1) __val = (val); \ + unsigned int __ret; \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) \ + __val = (typeof(__tmp->ptr))NULL; \ + if (__recsize) \ + __ret = __kfifo_out_peek_r(__kfifo, __val, sizeof(*__val), \ + __recsize); \ + else { \ + __ret = !kfifo_is_empty(__tmp); \ + if (__ret) { \ + *(typeof(__tmp->type))__val = \ + (__is_kfifo_ptr(__tmp) ? \ + ((typeof(__tmp->type))__kfifo->data) : \ + (__tmp->buf) \ + )[__kfifo->out & __tmp->kfifo.mask]; \ + smp_wmb(); \ + } \ + } \ + __ret; \ +}) \ +) + +/** + * kfifo_in - put data into the fifo + * @fifo: address of the fifo to be used + * @buf: the data to be added + * @n: number of elements to be added + * + * This macro copies the given buffer into the fifo and returns the + * number of copied elements. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_in(fifo, buf, n) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((buf) + 1) __buf = (buf); \ + unsigned long __n = (n); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) { \ + typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \ + __dummy = (typeof(__buf))NULL; \ + } \ + (__recsize) ?\ + __kfifo_in_r(__kfifo, __buf, __n, __recsize) : \ + __kfifo_in(__kfifo, __buf, __n); \ +}) + +/** + * kfifo_in_spinlocked - put data into the fifo using a spinlock for locking + * @fifo: address of the fifo to be used + * @buf: the data to be added + * @n: number of elements to be added + * @lock: pointer to the spinlock to use for locking + * + * This macro copies the given values buffer into the fifo and returns the + * number of copied elements. + */ +#define kfifo_in_spinlocked(fifo, buf, n, lock) \ +({ \ + unsigned long __flags; \ + unsigned int __ret; \ + spin_lock_irqsave(lock, __flags); \ + __ret = kfifo_in(fifo, buf, n); \ + spin_unlock_irqrestore(lock, __flags); \ + __ret; \ +}) + +/* alias for kfifo_in_spinlocked, will be removed in a future release */ +#define kfifo_in_locked(fifo, buf, n, lock) \ + kfifo_in_spinlocked(fifo, buf, n, lock) + +/** + * kfifo_out - get data from the fifo + * @fifo: address of the fifo to be used + * @buf: pointer to the storage buffer + * @n: max. number of elements to get + * + * This macro get some data from the fifo and return the numbers of elements + * copied. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_out(fifo, buf, n) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((buf) + 1) __buf = (buf); \ + unsigned long __n = (n); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) { \ + typeof(__tmp->ptr) __dummy = NULL; \ + __buf = __dummy; \ + } \ + (__recsize) ?\ + __kfifo_out_r(__kfifo, __buf, __n, __recsize) : \ + __kfifo_out(__kfifo, __buf, __n); \ +}) \ +) + +/** + * kfifo_out_spinlocked - get data from the fifo using a spinlock for locking + * @fifo: address of the fifo to be used + * @buf: pointer to the storage buffer + * @n: max. number of elements to get + * @lock: pointer to the spinlock to use for locking + * + * This macro get the data from the fifo and return the numbers of elements + * copied. + */ +#define kfifo_out_spinlocked(fifo, buf, n, lock) \ +__kfifo_uint_must_check_helper( \ +({ \ + unsigned long __flags; \ + unsigned int __ret; \ + spin_lock_irqsave(lock, __flags); \ + __ret = kfifo_out(fifo, buf, n); \ + spin_unlock_irqrestore(lock, __flags); \ + __ret; \ +}) \ +) + +/* alias for kfifo_out_spinlocked, will be removed in a future release */ +#define kfifo_out_locked(fifo, buf, n, lock) \ + kfifo_out_spinlocked(fifo, buf, n, lock) + +/** + * kfifo_from_user - puts some data from user space into the fifo + * @fifo: address of the fifo to be used + * @from: pointer to the data to be added + * @len: the length of the data to be added + * @copied: pointer to output variable to store the number of copied bytes + * + * This macro copies at most @len bytes from the @from into the + * fifo, depending of the available space and returns -EFAULT/0. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_from_user(fifo, from, len, copied) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + const void __user *__from = (from); \ + unsigned int __len = (len); \ + unsigned int *__copied = (copied); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + (__recsize) ? \ + __kfifo_from_user_r(__kfifo, __from, __len, __copied, __recsize) : \ + __kfifo_from_user(__kfifo, __from, __len, __copied); \ +}) \ +) + +/** + * kfifo_to_user - copies data from the fifo into user space + * @fifo: address of the fifo to be used + * @to: where the data must be copied + * @len: the size of the destination buffer + * @copied: pointer to output variable to store the number of copied bytes + * + * This macro copies at most @len bytes from the fifo into the + * @to buffer and returns -EFAULT/0. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_to_user(fifo, to, len, copied) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + void __user *__to = (to); \ + unsigned int __len = (len); \ + unsigned int *__copied = (copied); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + (__recsize) ? \ + __kfifo_to_user_r(__kfifo, __to, __len, __copied, __recsize) : \ + __kfifo_to_user(__kfifo, __to, __len, __copied); \ +}) \ +) + +/** + * kfifo_dma_in_prepare - setup a scatterlist for DMA input + * @fifo: address of the fifo to be used + * @sgl: pointer to the scatterlist array + * @nents: number of entries in the scatterlist array + * @len: number of elements to transfer + * + * This macro fills a scatterlist for DMA input. + * It returns the number entries in the scatterlist array. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macros. + */ +#define kfifo_dma_in_prepare(fifo, sgl, nents, len) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + struct scatterlist *__sgl = (sgl); \ + int __nents = (nents); \ + unsigned int __len = (len); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + (__recsize) ? \ + __kfifo_dma_in_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \ + __kfifo_dma_in_prepare(__kfifo, __sgl, __nents, __len); \ +}) + +/** + * kfifo_dma_in_finish - finish a DMA IN operation + * @fifo: address of the fifo to be used + * @len: number of bytes to received + * + * This macro finish a DMA IN operation. The in counter will be updated by + * the len parameter. No error checking will be done. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macros. + */ +#define kfifo_dma_in_finish(fifo, len) \ +(void)({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + unsigned int __len = (len); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (__recsize) \ + __kfifo_dma_in_finish_r(__kfifo, __len, __recsize); \ + else \ + __kfifo->in += __len / sizeof(*__tmp->type); \ +}) + +/** + * kfifo_dma_out_prepare - setup a scatterlist for DMA output + * @fifo: address of the fifo to be used + * @sgl: pointer to the scatterlist array + * @nents: number of entries in the scatterlist array + * @len: number of elements to transfer + * + * This macro fills a scatterlist for DMA output which at most @len bytes + * to transfer. + * It returns the number entries in the scatterlist array. + * A zero means there is no space available and the scatterlist is not filled. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macros. + */ +#define kfifo_dma_out_prepare(fifo, sgl, nents, len) \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + struct scatterlist *__sgl = (sgl); \ + int __nents = (nents); \ + unsigned int __len = (len); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + (__recsize) ? \ + __kfifo_dma_out_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \ + __kfifo_dma_out_prepare(__kfifo, __sgl, __nents, __len); \ +}) + +/** + * kfifo_dma_out_finish - finish a DMA OUT operation + * @fifo: address of the fifo to be used + * @len: number of bytes transferd + * + * This macro finish a DMA OUT operation. The out counter will be updated by + * the len parameter. No error checking will be done. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macros. + */ +#define kfifo_dma_out_finish(fifo, len) \ +(void)({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + unsigned int __len = (len); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (__recsize) \ + __kfifo_dma_out_finish_r(__kfifo, __recsize); \ + else \ + __kfifo->out += __len / sizeof(*__tmp->type); \ +}) + +/** + * kfifo_out_peek - gets some data from the fifo + * @fifo: address of the fifo to be used + * @buf: pointer to the storage buffer + * @n: max. number of elements to get + * + * This macro get the data from the fifo and return the numbers of elements + * copied. The data is not removed from the fifo. + * + * Note that with only one concurrent reader and one concurrent + * writer, you don't need extra locking to use these macro. + */ +#define kfifo_out_peek(fifo, buf, n) \ +__kfifo_uint_must_check_helper( \ +({ \ + typeof((fifo) + 1) __tmp = (fifo); \ + typeof((buf) + 1) __buf = (buf); \ + unsigned long __n = (n); \ + const size_t __recsize = sizeof(*__tmp->rectype); \ + struct __kfifo *__kfifo = &__tmp->kfifo; \ + if (0) { \ + typeof(__tmp->ptr) __dummy __attribute__ ((unused)) = NULL; \ + __buf = __dummy; \ + } \ + (__recsize) ? \ + __kfifo_out_peek_r(__kfifo, __buf, __n, __recsize) : \ + __kfifo_out_peek(__kfifo, __buf, __n); \ +}) \ +) + +extern int __kfifo_alloc(struct __kfifo *fifo, unsigned int size, + size_t esize, gfp_t gfp_mask); + +extern void __kfifo_free(struct __kfifo *fifo); + +extern int __kfifo_init(struct __kfifo *fifo, void *buffer, + unsigned int size, size_t esize); + +extern unsigned int __kfifo_in(struct __kfifo *fifo, + const void *buf, unsigned int len); + +extern unsigned int __kfifo_out(struct __kfifo *fifo, + void *buf, unsigned int len); + +extern int __kfifo_from_user(struct __kfifo *fifo, + const void __user *from, unsigned long len, unsigned int *copied); + +extern int __kfifo_to_user(struct __kfifo *fifo, + void __user *to, unsigned long len, unsigned int *copied); + +extern unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo, + struct scatterlist *sgl, int nents, unsigned int len); + +extern unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo, + struct scatterlist *sgl, int nents, unsigned int len); + +extern unsigned int __kfifo_out_peek(struct __kfifo *fifo, + void *buf, unsigned int len); + +extern unsigned int __kfifo_in_r(struct __kfifo *fifo, + const void *buf, unsigned int len, size_t recsize); + +extern unsigned int __kfifo_out_r(struct __kfifo *fifo, + void *buf, unsigned int len, size_t recsize); + +extern int __kfifo_from_user_r(struct __kfifo *fifo, + const void __user *from, unsigned long len, unsigned int *copied, + size_t recsize); + +extern int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to, + unsigned long len, unsigned int *copied, size_t recsize); + +extern unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo, + struct scatterlist *sgl, int nents, unsigned int len, size_t recsize); + +extern void __kfifo_dma_in_finish_r(struct __kfifo *fifo, + unsigned int len, size_t recsize); + +extern unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo, + struct scatterlist *sgl, int nents, unsigned int len, size_t recsize); + +extern void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize); + +extern unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize); + +extern void __kfifo_skip_r(struct __kfifo *fifo, size_t recsize); + +extern unsigned int __kfifo_out_peek_r(struct __kfifo *fifo, + void *buf, unsigned int len, size_t recsize); + +extern unsigned int __kfifo_max_r(unsigned int len, size_t recsize); + +#endif +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) */ diff --git a/include/compat/linux/math64.h b/include/compat/linux/math64.h new file mode 100755 index 0000000..eb9e8e1 --- /dev/null +++ b/include/compat/linux/math64.h @@ -0,0 +1,10 @@ +#ifndef _COMPAT_LINUX_MATH64_H +#define _COMPAT_LINUX_MATH64_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) +#include_next +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */ + +#endif /* _COMPAT_LINUX_MATH64_H */ diff --git a/include/compat/linux/nl80211.h b/include/compat/linux/nl80211.h new file mode 100755 index 0000000..c1ba388 --- /dev/null +++ b/include/compat/linux/nl80211.h @@ -0,0 +1,2932 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006-2010 Johannes Berg + * Copyright 2008 Michael Wu + * Copyright 2008 Luis Carlos Cobo + * Copyright 2008 Michael Buesch + * Copyright 2008, 2009 Luis R. Rodriguez + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include + +/** + * DOC: Station handling + * + * Stations are added per interface, but a special case exists with VLAN + * interfaces. When a station is bound to an AP interface, it may be moved + * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). + * The station is still assumed to belong to the AP interface it was added + * to. + * + * TODO: need more info? + */ + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * management entities such as wpa_supplicant react to management frames + * that are not being handled by the kernel. This includes, for example, + * certain classes of action frames that cannot be handled in the kernel + * for various reasons. + * + * Frame registration is done on a per-interface basis and registrations + * cannot be removed other than by closing the socket. It is possible to + * specify a registration filter to register, for example, only for a + * certain type of action frame. In particular with action frames, those + * that userspace registers for will not be returned as unhandled by the + * driver, so that the registered application has to take responsibility + * for doing that. + * + * The type of frame that can be registered for is also dependent on the + * driver and interface type. The frame types are advertised in wiphy + * attributes so applications know what to expect. + * + * NOTE: When an interface changes type while registrations are active, + * these registrations are ignored until the interface type is + * changed again. This means that changing the interface type can + * lead to a situation that couldn't otherwise be produced, but + * any such registrations will be dormant in the sense that they + * will not be serviced, i.e. they will not receive any frames. + * + * Frame transmission allows userspace to send for example the required + * responses to action frames. It is subject to some sanity checking, + * but many frames can be transmitted. When a frame was transmitted, its + * status is indicated to the sending socket. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * DOC: Virtual interface / concurrency capabilities + * + * Some devices are able to operate with virtual MACs, they can have + * more than one virtual interface. The capability handling for this + * is a bit complex though, as there may be a number of restrictions + * on the types of concurrency that are supported. + * + * To start with, each device supports the interface types listed in + * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the + * types there no concurrency is implied. + * + * Once concurrency is desired, more attributes must be observed: + * To start with, since some interface types are purely managed in + * software, like the AP-VLAN type in mac80211 for example, there's + * an additional list of these, they can be added at any time and + * are only restricted by some semantic restrictions (e.g. AP-VLAN + * cannot be added without a corresponding AP interface). This list + * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. + * + * Further, the list of supported combinations is exported. This is + * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, + * it exports a list of "groups", and at any point in time the + * interfaces that are currently active must fall into any one of + * the advertised groups. Within each group, there are restrictions + * on the number of interfaces of different types that are supported + * and also the number of different channels, along with potentially + * some other restrictions. See &enum nl80211_if_combination_attrs. + * + * All together, these attributes define the concurrency of virtual + * interfaces that a given device supports. + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. + * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL + * instead, the support here is for backward compatibility only. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request on a %NL80211_ATTR_WIPHY or a specific get + * on an %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX + * or %NL80211_ATTR_MAC. + * + * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a + * %NL80222_CMD_NEW_BEACON message) + * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, + * parameters are like for %NL80211_CMD_SET_BEACON. + * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * + * @NL80211_CMD_GET_STATION: Get station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_STATION: Set station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by + * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. + * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all mesh paths, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set + * regulatory domain. + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. + * + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, + * partial scan results may be available + * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain + * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty + * string). If no SSID is passed, no probe requests are sent and + * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT + * if scheduled scan is not running. + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has + * stopped. The driver may issue this event at any time during a + * scheduled scan. One reason for stopping the scan is if the hardware + * does not support starting an association or a normal scan while running + * a scheduled scan. This event is also sent when the + * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface + * is brought down while a scheduled scan was running. + * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. + * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, + * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the STATUS_CODE attribute. + * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), + * sent as an event when the card/driver roamed by itself. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * + * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. + * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus + * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be + * optionally used to specify additional channel parameters. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds + * to remain on the channel. This command is also used as an event to + * notify when the requested duration starts (it may take a while for the + * driver to schedule this time due to other concurrent needs for the + * radio). + * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) + * that will be included with any events pertaining to this request; + * the cookie is also used to cancel the request. + * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a + * pending remain-on-channel duration if the desired operation has been + * completed prior to expiration of the originally requested duration. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the + * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to + * uniquely identify the request. + * This command is also used as an event to notify when a requested + * remain-on-channel duration has expired. + * + * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX + * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface + * and @NL80211_ATTR_TX_RATES the set of allowed rates. + * + * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames + * (via @NL80211_CMD_FRAME) for processing in userspace. This command + * requires an interface index, a frame type attribute (optional for + * backward compatibility reasons, if not given assumes action frames) + * and a match attribute containing the first few bytes of the frame + * that should match, e.g. a single byte for only a category match or + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This + * command is used both as a request to transmit a management frame and + * as an event indicating reception of a frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and + * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on + * which channel the frame is to be transmitted or was received. If this + * channel is not the current channel (remain-on-channel or the + * operational channel) the device will switch to the given channel and + * transmit the frame, optionally waiting for a response for the time + * specified using %NL80211_ATTR_DURATION. When called, this operation + * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the + * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. + * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this + * command may be used with the corresponding cookie to cancel the wait + * time if it is known that it is no longer necessary. + * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. + * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame + * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. + * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for + * backward compatibility. + * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command + * is used to configure connection quality monitoring notification trigger + * levels. + * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This + * command is used as an event to indicate the that a trigger level was + * reached. + * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ + * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed + * by %NL80211_ATTR_IFINDEX) shall operate on. + * In case multiple channels are supported by the device, the mechanism + * with which it switches channels is implementation-defined. + * When a monitor interface is given, it can only switch channel while + * no other interfaces are operating to avoid disturbing the operation + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * + * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial + * mesh config parameters may be given. + * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On + * reception of this notification, userspace may decide to create a new + * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * + * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. + * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. + * Since wireless is more complex than wired ethernet, it supports + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see + * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * + * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver + * the necessary information for supporting GTK rekey offload. This + * feature is typically used during WoWLAN. The configuration data + * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and + * contains the data in sub-attributes). After rekeying happened, + * this command may also be sent by the driver as an MLME event to + * inform userspace of the new replay counter. + * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. + * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * + * @NL80211_CMD_BTCOEX_INQ: This command is used to provide WiFi driver the + * Bluetooth inquiry status. The status will be available in flag + * %NL80211_ATTR_BTCOEX_INQ_STATUS. This information can be used to + * manage shared resources when the wireless device is a Bluetooth-Wifi + * coex solution. + * + * @NL80211_CMD_BTCOEX_SCO: This command is used to give the driver the + * Bluetooth SCO connection status. The SCO status is available in + * %NL80211_ATTR_BTCOEX_SCO_STATUS flag. It also provide + * %NL80211_ATTR_BTCOEX_TYPE_ESCO to specify if the connection is ESCO. + * It also has %NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL specifing the time + * between consecutive eSCO instance(Invalid for SCO). + * %NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN spedicying the the length in + * bytes of the eSCO payload in transmit direction.This feature + * useful for a Bluetooth-Wifi coex solution. + * + * @NL80211_CMD_BTCOEX_A2DP: This command is used to give the driver the + * Bluetooth A2DP profile connection status. The A2DP profile connection + * status is available in %NL80211_ATTR_BTCOEX_A2DP_STATUS flag. + * This feature is typically used when the wireless device is a + * Bluetooth-Wifi coex solution. + * + * @NL80211_CMD_BTCOEX_ACL_INFO: This command is used to let the wifi driver + * know information regarding the ACL link. Currently supported + * information includes The role as %NL80211_ATTR_BTCOEX_ACL_ROLE, + * %NL80211_ATTR_BTCOEX_REMOTE_LMP_VER showing the LMP version of the + * remote device. This feature is useful when the wireless device is a + * Bluetooth-Wifi coex solution. + * + * @NL80211_CMD_BTCOEX_ANTENNA_CONFIG: This command is used to let the wifi + * driver know information regarding the antenna configuration used + * in case of a BT-coex solution. This information is provide as + * %NL80211_ATTR_BTCOEX_ANTENNA_CONFIG.This feature is useful when + * the wireless device is a Bluetooth-Wifi coex solution. + * + * @NL80211_CMD_BTCOEX_BT_VENDOR: This command is used to let the wifi + * driver know the Bluetooth chip vendor. This would let it use + * different configuration in case of different BT chip vendor + * is used in BT-Coex scenario. This information is provided as + * %NL80211_ATTR_BT_VENDOR_ID.This feature is useful when + * the wireless device is a Bluetooth-Wifi coex solution. + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything between, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + NL80211_CMD_GET_KEY, + NL80211_CMD_SET_KEY, + NL80211_CMD_NEW_KEY, + NL80211_CMD_DEL_KEY, + + NL80211_CMD_GET_BEACON, + NL80211_CMD_SET_BEACON, + NL80211_CMD_NEW_BEACON, + NL80211_CMD_DEL_BEACON, + + NL80211_CMD_GET_STATION, + NL80211_CMD_SET_STATION, + NL80211_CMD_NEW_STATION, + NL80211_CMD_DEL_STATION, + + NL80211_CMD_GET_MPATH, + NL80211_CMD_SET_MPATH, + NL80211_CMD_NEW_MPATH, + NL80211_CMD_DEL_MPATH, + + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, + + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, + + NL80211_CMD_GET_REG, + + NL80211_CMD_GET_SCAN, + NL80211_CMD_TRIGGER_SCAN, + NL80211_CMD_NEW_SCAN_RESULTS, + NL80211_CMD_SCAN_ABORTED, + + NL80211_CMD_REG_CHANGE, + + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + + NL80211_CMD_MICHAEL_MIC_FAILURE, + + NL80211_CMD_REG_BEACON_HINT, + + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + + NL80211_CMD_REMAIN_ON_CHANNEL, + NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, + + NL80211_CMD_SET_TX_BITRATE_MASK, + + NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_FRAME, + NL80211_CMD_ACTION = NL80211_CMD_FRAME, + NL80211_CMD_FRAME_TX_STATUS, + NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, + + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + + NL80211_CMD_SET_CQM, + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, + NL80211_CMD_SET_WDS_PEER, + + NL80211_CMD_FRAME_WAIT_CANCEL, + + NL80211_CMD_JOIN_MESH, + NL80211_CMD_LEAVE_MESH, + + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + + NL80211_CMD_NEW_PEER_CANDIDATE, + + NL80211_CMD_GET_WOWLAN, + NL80211_CMD_SET_WOWLAN, + + NL80211_CMD_START_SCHED_SCAN, + NL80211_CMD_STOP_SCHED_SCAN, + NL80211_CMD_SCHED_SCAN_RESULTS, + NL80211_CMD_SCHED_SCAN_STOPPED, + + NL80211_CMD_SET_REKEY_OFFLOAD, + + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + + NL80211_CMD_UNEXPECTED_FRAME, + + NL80211_CMD_PROBE_CLIENT, + + NL80211_CMD_REGISTER_BEACONS, + + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + NL80211_CMD_SET_NOACK_MAP, + + NL80211_CMD_PRIV, + + NL80211_CMD_P2P_FLUSH, + + NL80211_CMD_BTCOEX_INQ, + NL80211_CMD_BTCOEX_SCO, + NL80211_CMD_BTCOEX_A2DP, + NL80211_CMD_BTCOEX_ACL_INFO, + NL80211_CMD_BTCOEX_ANTENNA_CONFIG, + NL80211_CMD_BTCOEX_BT_VENDOR, + NL80211_CMD_BTCOEX, + + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE +#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT + +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211//index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ + * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including + * this attribute) + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 + * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 + * section 7.3.2.9; dot11CoverageClass; u8 + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_MAC: MAC address (various uses) + * + * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * + * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU + * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing + * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE + * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE + * + * @NL80211_ATTR_STA_AID: Association ID for the station (u16) + * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) + * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by + * IEEE 802.11 7.3.1.6 (u16). + * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported + * rates as defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station + * to, or the AP interface the station was originally added to to. + * @NL80211_ATTR_STA_INFO: information about a station, part of station info + * given for %NL80211_CMD_GET_STATION, nested attribute containing + * info as possible, see &enum nl80211_sta_info. + * + * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, + * consisting of a nested array. + * + * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. + * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * &enum nl80211_mpath_info. + * + * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_mntr_flags. + * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * + * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with + * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can + * scan with a single scheduled scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request + * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information + * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive + * scanning and include a zero-length SSID (wildcard) for wildcard scan + * @NL80211_ATTR_BSS: scan result BSS + * + * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used + * with %NL80211_CMD_ASSOCIATE request + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE + * commands to specify using a reassociate frame + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * + * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. + * + * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. + * + * @NL80211_ATTR_TX_RATES: Nested set of attributes + * (enum nl80211_tx_rate_attributes) describing TX rates per band. The + * enum nl80211_band value is used as the index (nla_type() of the nested + * data. If a band is not included, it will be configured to allow all + * rates based on negotiated supported rates information. This attribute + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. + * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the + * @NL80211_CMD_REGISTER_FRAME command. + * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be transmitted with + * %NL80211_CMD_FRAME. + * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be registered for RX. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * + * @NL80211_ATTR_CQM: connection quality monitor configuration in a + * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. + * + * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command + * is requesting a local authentication/association state change without + * invoking actual management frame exchange. This can be used with + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, + * NL80211_CMD_DISASSOCIATE. + * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * + * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See + * &enum nl80211_tx_power_setting for possible values. + * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * + * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly + * means support for per-station GTKs. + * + * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. + * This can be used to mask out antennas which are not attached or should + * not be used for transmitting. If an antenna is not selected in this + * bitmap the hardware is not allowed to transmit on this antenna. + * + * Each bit represents one antenna, starting with antenna 1 at the first + * bit. Depending on which antennas are selected in the bitmap, 802.11n + * drivers can derive which chainmasks to use (if all antennas belonging to + * a particular chain are disabled this chain should be disabled) and if + * a chain has diversity antennas wether diversity should be used or not. + * HT capabilities (STBC, TX Beamforming, Antenna selection) can be + * derived from the available chains after applying the antenna mask. + * Non-802.11n drivers can derive wether to use diversity or not. + * Drivers may reject configurations or RX/TX mask combinations they cannot + * support by returning -EINVAL. + * + * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. + * This can be used to mask out antennas which are not attached or should + * not be used for receiving. If an antenna is not selected in this bitmap + * the hardware should not be configured to receive on this antenna. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available + * for configuration as TX antennas via the above parameters. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available + * for configuration as RX antennas via the above parameters. + * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * + * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be + * transmitted on another channel when the channel given doesn't match + * the current channel. If the current channel doesn't match and this + * flag isn't set, the frame will be rejected. This is also used as an + * nl80211 capability flag. + * + * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute + * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as + * defined in &enum nl80211_plink_state. Used when userspace is + * driving the peer link management state machine. + * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * + * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy + * capabilities, the supported WoWLAN triggers + * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to + * indicate which WoW triggers should be enabled. This is also + * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN + * triggers. + + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. + + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If ommited, no filtering is done. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes + * defined in &enum nl80211_if_combination_attrs. + * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like + * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that + * are managed in software: interfaces of these types aren't subject to + * any restrictions in their number or combinations. + * + * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. + * + * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, + * nested array attribute containing an entry for each band, with the entry + * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but + * without the length restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). + * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * + * @%NL80211_ATTR_BTCOEX_INQ_STATUS: A flag indicating if Bluetooth inquiry + * is in progress. this flag is useful for resource management in a + * bluetooth wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_SCO_STATUS: A flag indicating if Bluetooth SCO audio + * connection is active. this flag is useful for resource management in a + * bluetooth wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_TYPE_ESCO: A flag indicating if the audio connection + * is of type ESCO. If this attribute is available, the audio connection + * is of type ESCO. this information is useful for resource management + * in a bluetooth wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL: Provides the time between two + * consecutive eSCO instant, measured in slots.This attribute will be + * available only in case of an eSCO connection. + * this information is useful for resource management in a bluetooth + * wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN: Provides the length in bytes of the + * eSCO payload in the receive direction. This attribute will be available + * in case of an eSCO connection. + * this information is useful for resource management in a bluetooth + * wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_A2DP_STATUS: A flag indicating the Bluetooth + * A2DP connection status. This flag is useful for resource management + * in a bluetooth wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_ACL_ROLE: Indicates if Bluetooth chip's role + * in an ACL connection. See &enum nl80211_btcoex_acl_role for possible + * value. This flag is useful for resource management in a bluetooth + * wifi combo solution. + * + * @%NL80211_ATTR_BTCOEX_REMOTE_LMP_VER: Indicates the remote device LMP version + * in an ACL connection. See Link manager version parameter in Bluetooth + * assigned numbers for possible value. This values is useful for resource + * management in a bluetooth wifi combo solution. + * @%NL80211_ATTR_BTCOEX_ANTENNA_CONFIG: Indicates the Bluetooth wifi chip + * configuration. See &enum nl80211_btcoex_antenna_config for possible + * value. This flag is useful for resource management in a bluetooth + * wifi combo solution. + * @%NL80211_ATTR_BT_VENDOR_ID: Indicates the Bluetooth chip + * vendor name. See &enum nl80211_btcoex_vendor_list for possible + * value. This flag is useful for resource management in a bluetooth + * wifi combo solution. + * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything between, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + NL80211_ATTR_MAC, + + NL80211_ATTR_KEY_DATA, + NL80211_ATTR_KEY_IDX, + NL80211_ATTR_KEY_CIPHER, + NL80211_ATTR_KEY_SEQ, + NL80211_ATTR_KEY_DEFAULT, + + NL80211_ATTR_BEACON_INTERVAL, + NL80211_ATTR_DTIM_PERIOD, + NL80211_ATTR_BEACON_HEAD, + NL80211_ATTR_BEACON_TAIL, + + NL80211_ATTR_STA_AID, + NL80211_ATTR_STA_FLAGS, + NL80211_ATTR_STA_LISTEN_INTERVAL, + NL80211_ATTR_STA_SUPPORTED_RATES, + NL80211_ATTR_STA_VLAN, + NL80211_ATTR_STA_INFO, + + NL80211_ATTR_WIPHY_BANDS, + + NL80211_ATTR_MNTR_FLAGS, + + NL80211_ATTR_MESH_ID, + NL80211_ATTR_STA_PLINK_ACTION, + NL80211_ATTR_MPATH_NEXT_HOP, + NL80211_ATTR_MPATH_INFO, + + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + + NL80211_ATTR_MESH_CONFIG, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + NL80211_ATTR_WIPHY_FREQ, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, + + NL80211_ATTR_KEY_DEFAULT_MGMT, + + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + + NL80211_ATTR_MAX_NUM_SCAN_SSIDS, + + NL80211_ATTR_SCAN_FREQUENCIES, + NL80211_ATTR_SCAN_SSIDS, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ + NL80211_ATTR_BSS, + + NL80211_ATTR_REG_INITIATOR, + NL80211_ATTR_REG_TYPE, + + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + + NL80211_ATTR_KEY_TYPE, + + NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, + + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + + NL80211_ATTR_DURATION, + + NL80211_ATTR_COOKIE, + + NL80211_ATTR_WIPHY_COVERAGE_CLASS, + + NL80211_ATTR_TX_RATES, + + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + + NL80211_ATTR_PS_STATE, + + NL80211_ATTR_CQM, + + NL80211_ATTR_LOCAL_STATE_CHANGE, + + NL80211_ATTR_AP_ISOLATE, + + NL80211_ATTR_WIPHY_TX_POWER_SETTING, + NL80211_ATTR_WIPHY_TX_POWER_LEVEL, + + NL80211_ATTR_TX_FRAME_TYPES, + NL80211_ATTR_RX_FRAME_TYPES, + NL80211_ATTR_FRAME_TYPE, + + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + + NL80211_ATTR_SUPPORT_IBSS_RSN, + + NL80211_ATTR_WIPHY_ANTENNA_TX, + NL80211_ATTR_WIPHY_ANTENNA_RX, + + NL80211_ATTR_MCAST_RATE, + + NL80211_ATTR_OFFCHANNEL_TX_OK, + + NL80211_ATTR_BSS_HT_OPMODE, + + NL80211_ATTR_KEY_DEFAULT_TYPES, + + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + + NL80211_ATTR_MESH_SETUP, + + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + + NL80211_ATTR_SUPPORT_MESH_AUTH, + NL80211_ATTR_STA_PLINK_STATE, + + NL80211_ATTR_WOWLAN_TRIGGERS, + NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, + + NL80211_ATTR_SCHED_SCAN_INTERVAL, + + NL80211_ATTR_INTERFACE_COMBINATIONS, + NL80211_ATTR_SOFTWARE_IFTYPES, + + NL80211_ATTR_REKEY_DATA, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, + NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, + + NL80211_ATTR_SCAN_SUPP_RATES, + + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + + NL80211_ATTR_DEVICE_AP_SME, + + NL80211_ATTR_DONT_WAIT_FOR_ACK, + + NL80211_ATTR_FEATURE_FLAGS, + + NL80211_ATTR_PROBE_RESP_OFFLOAD, + + NL80211_ATTR_PROBE_RESP, + + NL80211_ATTR_DFS_REGION, + + NL80211_ATTR_DISABLE_HT, + NL80211_ATTR_HT_CAPABILITY_MASK, + + NL80211_ATTR_NOACK_MAP, + + NL80211_ATTR_PRIV_CMD, + + NL80211_ATTR_BTCOEX_INQ_STATUS, + NL80211_ATTR_BTCOEX_SCO_STATUS, + NL80211_ATTR_BTCOEX_TYPE_ESCO, + NL80211_ATTR_BTCOEX_ESCO_TX_INTERVAL, + NL80211_ATTR_BTCOEX_ESCO_TX_PKT_LEN, + NL80211_ATTR_BTCOEX_A2DP_STATUS, + NL80211_ATTR_BTCOEX_ACL_ROLE, + NL80211_ATTR_BTCOEX_REMOTE_LMP_VER, + NL80211_ATTR_BTCOEX_ANTENNA_CONFIG, + NL80211_ATTR_BT_VENDOR_ID, + NL80211_ATTR_BTCOEX_DATA, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG + +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS +#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE +#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR +#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_REG_RULES 32 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 + +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces + * are a bit special in that they must always be tied to a pre-existing + * AP type interface. + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, + + /* keep last */ + NUM_NL80211_IFTYPES, + NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 +}; + +/** + * enum nl80211_sta_flags - station flags + * + * Station flags. When a station is added to an AP interface, it is + * assumed to be already associated (and hence authenticated.) + * + * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved + * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) + * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames + * with short barker preamble + * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer + * @NL80211_STA_FLAG_MAX: highest station flag number currently defined + * @__NL80211_STA_FLAG_AFTER_LAST: internal use + */ +enum nl80211_sta_flags { + __NL80211_STA_FLAG_INVALID, + NL80211_STA_FLAG_AUTHORIZED, + NL80211_STA_FLAG_SHORT_PREAMBLE, + NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, + + /* keep last */ + __NL80211_STA_FLAG_AFTER_LAST, + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 +}; + +/** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** + * enum nl80211_rate_info - bitrate information + * + * These attribute types are used with %NL80211_STA_INFO_TXRATE + * when getting information about the bitrate of a station. + * + * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved + * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) + * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ +enum nl80211_rate_info { + __NL80211_RATE_INFO_INVALID, + NL80211_RATE_INFO_BITRATE, + NL80211_RATE_INFO_MCS, + NL80211_RATE_INFO_40_MHZ_WIDTH, + NL80211_RATE_INFO_SHORT_GI, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, + NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_bss_param - BSS information collected by STA + * + * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM + * when getting information about the bitrate of a station. + * + * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved + * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) + * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) + * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) + * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined + * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use + */ +enum nl80211_sta_bss_param { + __NL80211_STA_BSS_PARAM_INVALID, + NL80211_STA_BSS_PARAM_CTS_PROT, + NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, + NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, + NL80211_STA_BSS_PARAM_DTIM_PERIOD, + NL80211_STA_BSS_PARAM_BEACON_INTERVAL, + + /* keep last */ + __NL80211_STA_BSS_PARAM_AFTER_LAST, + NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_info - station information + * + * These attribute types are used with %NL80211_ATTR_STA_INFO + * when getting information about a station. + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute + * containing info as possible, see &enum nl80211_rate_info + * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this + * station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) + * @NL80211_STA_INFO_LLID: the station's mesh LLID + * @NL80211_STA_INFO_PLID: the station's mesh PLID + * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) + * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested + * attribute, like NL80211_STA_INFO_TX_BITRATE. + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, + NL80211_STA_INFO_INACTIVE_TIME, + NL80211_STA_INFO_RX_BYTES, + NL80211_STA_INFO_TX_BYTES, + NL80211_STA_INFO_LLID, + NL80211_STA_INFO_PLID, + NL80211_STA_INFO_PLINK_STATE, + NL80211_STA_INFO_SIGNAL, + NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, + NL80211_STA_INFO_TX_RETRIES, + NL80211_STA_INFO_TX_FAILED, + NL80211_STA_INFO_SIGNAL_AVG, + NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, + NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active + * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN + * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set + * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded + */ +enum nl80211_mpath_flags { + NL80211_MPATH_FLAG_ACTIVE = 1<<0, + NL80211_MPATH_FLAG_RESOLVING = 1<<1, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, + NL80211_MPATH_FLAG_FIXED = 1<<3, + NL80211_MPATH_FLAG_RESOLVED = 1<<4, +}; + +/** + * enum nl80211_mpath_info - mesh path information + * + * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting + * information about a mesh path. + * + * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved + * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination + * @NL80211_MPATH_INFO_SN: destination sequence number + * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path + * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now + * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in + * &enum nl80211_mpath_flags; + * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number + * currently defind + * @__NL80211_MPATH_INFO_AFTER_LAST: internal use + */ +enum nl80211_mpath_info { + __NL80211_MPATH_INFO_INVALID, + NL80211_MPATH_INFO_FRAME_QLEN, + NL80211_MPATH_INFO_SN, + NL80211_MPATH_INFO_METRIC, + NL80211_MPATH_INFO_EXPTIME, + NL80211_MPATH_INFO_FLAGS, + NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, + NL80211_MPATH_INFO_DISCOVERY_RETRIES, + + /* keep last */ + __NL80211_MPATH_INFO_AFTER_LAST, + NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, + * an array of nested frequency attributes + * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, + * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_attr { + __NL80211_BAND_ATTR_INVALID, + NL80211_BAND_ATTR_FREQS, + NL80211_BAND_ATTR_RATES, + + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + +/** + * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz + * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current + * regulatory domain. + * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is + * permitted on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + */ +enum nl80211_frequency_attr { + __NL80211_FREQUENCY_ATTR_INVALID, + NL80211_FREQUENCY_ATTR_FREQ, + NL80211_FREQUENCY_ATTR_DISABLED, + NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, + NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, + NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER + +/** + * enum nl80211_bitrate_attr - bitrate attributes + * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps + * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported + * in 2.4 GHz band. + * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number + * currently defined + * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_bitrate_attr { + __NL80211_BITRATE_ATTR_INVALID, + NL80211_BITRATE_ATTR_RATE, + NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, + + /* keep last */ + __NL80211_BITRATE_ATTR_AFTER_LAST, + NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_initiator - Indicates the initiator of a reg domain request + * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world + * regulatory domain. + * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the + * wireless core it thinks its knows the regulatory domain we should be in. + * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country + * code from the IE, and relies on the regulatory domain information + * structure passed by userspace (CRDA) from our wireless-regdb. + * If a channel is enabled but the country code indicates it should + * be disabled we disable the channel and re-enable it upon disassociation. + */ +enum nl80211_reg_initiator { + NL80211_REGDOM_SET_BY_CORE, + NL80211_REGDOM_SET_BY_USER, + NL80211_REGDOM_SET_BY_DRIVER, + NL80211_REGDOM_SET_BY_COUNTRY_IE, +}; + +/** + * enum nl80211_reg_type - specifies the type of regulatory domain + * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains + * to a specific country. When this is set you can count on the + * ISO / IEC 3166 alpha2 country code being valid. + * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory + * domain. + * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. + * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product + * of an intersection between two regulatory domains -- the previously + * set regulatory domain on the system and the last accepted regulatory + * domain request to be processed. + */ +enum nl80211_reg_type { + NL80211_REGDOM_TYPE_COUNTRY, + NL80211_REGDOM_TYPE_WORLD, + NL80211_REGDOM_TYPE_CUSTOM_WORLD, + NL80211_REGDOM_TYPE_INTERSECTION, +}; + +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + +/** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used + * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio + * spent on this channel + * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) + * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy + * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent + * receiving data + * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent + * transmitting data + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, + NL80211_SURVEY_INFO_CHANNEL_TIME, + NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_CHANNEL_TIME_RX, + NL80211_SURVEY_INFO_CHANNEL_TIME_TX, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mntr_flags - monitor configuration flags + * + * Monitor configuration flags. + * + * @__NL80211_MNTR_FLAG_INVALID: reserved + * + * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS + * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @NL80211_MNTR_FLAG_CONTROL: pass control frames + * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering + * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. + * overrides all other flags. + * + * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use + * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag + */ +enum nl80211_mntr_flags { + __NL80211_MNTR_FLAG_INVALID, + NL80211_MNTR_FLAG_FCSFAIL, + NL80211_MNTR_FLAG_PLCPFAIL, + NL80211_MNTR_FLAG_CONTROL, + NL80211_MNTR_FLAG_OTHER_BSS, + NL80211_MNTR_FLAG_COOK_FRAMES, + + /* keep last */ + __NL80211_MNTR_FLAG_AFTER_LAST, + NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters. These can be changed while the mesh is + * active. + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically + * open peer links when we detect compatible mesh peers. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the mesh + * + * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not + * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, + NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the default + * HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element that + * vendors will use to identify the path selection methods and metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. + * + * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication + * daemon will be securing peer link frames. AMPE is a secured version of Mesh + * Peering Management (MPM) and is implemented with the assistance of a + * userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and key + * management). When the flag is unset (default), the kernel can autonomously + * complete (unsecured) mesh peering without the need of a userspace daemon. + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, + NL80211_MESH_SETUP_USERSPACE_AMPE, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_txq_q { + NL80211_TXQ_Q_VO, + NL80211_TXQ_Q_VI, + NL80211_TXQ_Q_BE, + NL80211_TXQ_Q_BK +}; + +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS +}; + +/** + * enum nl80211_bss - netlink attributes for a BSS + * + * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) + * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) + * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) + * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) + * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the + * raw information elements from the probe response/beacon (bin); + * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are + * from a Probe Response frame; otherwise they are from a Beacon frame. + * However, if the driver does not indicate the source of the IEs, these + * IEs may be from either frame subtype. + * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon + * in mBm (100 * dBm) (s32) + * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon + * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms + * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information + * elements from a Beacon frame (bin); not present if no Beacon frame has + * yet been received + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +enum nl80211_bss { + __NL80211_BSS_INVALID, + NL80211_BSS_BSSID, + NL80211_BSS_FREQUENCY, + NL80211_BSS_TSF, + NL80211_BSS_BEACON_INTERVAL, + NL80211_BSS_CAPABILITY, + NL80211_BSS_INFORMATION_ELEMENTS, + NL80211_BSS_SIGNAL_MBM, + NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, + NL80211_BSS_BEACON_IES, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, + NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * + * The BSS status is a BSS attribute in scan dumps, which + * indicates the status the interface has wrt. this BSS. + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC +}; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NUM_NL80211_KEYTYPES: number of defined key types + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, + + NUM_NL80211_KEYTYPES +}; + +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, +}; + +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, +}; + +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not + * specified the default depends on whether a MAC address was + * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + +/** + * enum nl80211_tx_rate_attributes - TX rate set attributes + * @__NL80211_TXRATE_INVALID: invalid + * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection + * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with + * 1 = 500 kbps) but without the IE length restriction (at most + * %NL80211_MAX_SUPP_RATES in a single array). + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +enum nl80211_tx_rate_attributes { + __NL80211_TXRATE_INVALID, + NL80211_TXRATE_LEGACY, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, + NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + */ +enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, +}; + +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + +/** + * enum nl80211_attr_cqm - connection quality monitor attributes + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero + * to disable. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). + * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many + * consecutive packets were not acknowledged by the peer + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +enum nl80211_attr_cqm { + __NL80211_ATTR_CQM_INVALID, + NL80211_ATTR_CQM_RSSI_THOLD, + NL80211_ATTR_CQM_RSSI_HYST, + NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + NL80211_ATTR_CQM_PKT_LOSS_EVENT, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, + NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the + * configured threshold + */ +enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, +}; + + +/** + * enum nl80211_tx_power_setting - TX power adjustment + * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power + * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter + * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter + */ +enum nl80211_tx_power_setting { + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_LIMITED, + NL80211_TX_POWER_FIXED, +}; + +/** + * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute + * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * a zero bit are ignored + * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * a bit for each byte in the pattern. The lowest-order bit corresponds + * to the first byte of the pattern, but the bytes of the pattern are + * in a little-endian-like format, i.e. the 9th byte of the pattern + * corresponds to the lowest-order bit in the second byte of the mask. + * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where + * xx indicates "don't care") would be represented by a pattern of + * twelve zero bytes, and a mask of "0xed,0x07". + * Note that the pattern matching is done as though frames were not + * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked + * first (including SNAP header unpacking) and then matched. + * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes + * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + */ +enum nl80211_wowlan_packet_pattern_attr { + __NL80211_WOWLAN_PKTPAT_INVALID, + NL80211_WOWLAN_PKTPAT_MASK, + NL80211_WOWLAN_PKTPAT_PATTERN, + + NUM_NL80211_WOWLAN_PKTPAT, + MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, +}; + +/** + * struct nl80211_wowlan_pattern_support - pattern support information + * @max_patterns: maximum number of patterns supported + * @min_pattern_len: minimum length of each pattern + * @max_pattern_len: maximum length of each pattern + * + * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the + * capability information given by the kernel to userspace. + */ +struct nl80211_wowlan_pattern_support { + __u32 max_patterns; + __u32 min_pattern_len; + __u32 max_pattern_len; +} __attribute__((packed)); + +/** + * enum nl80211_wowlan_triggers - WoWLAN trigger definitions + * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed + * by 16 repetitions of MAC addr, anywhere in payload) (flag) + * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns + * which are passed in an array of nested attributes, each nested attribute + * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. + * Each pattern defines a wakeup packet. The matching is done on the MSDU, + * i.e. as though the packet was an 802.3 packet, so the pattern matching + * is done after the packet is converted to the MSDU. + * + * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute + * carrying a &struct nl80211_wowlan_pattern_support. + * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be + * used when setting, used only to indicate that GTK rekeying is supported + * by the device (flag) + * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if + * done by the device) (flag) + * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request + * packet (flag) + * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) + * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released + * (on devices that have rfkill in the device) (flag) + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + */ +enum nl80211_wowlan_triggers { + __NL80211_WOWLAN_TRIG_INVALID, + NL80211_WOWLAN_TRIG_ANY, + NL80211_WOWLAN_TRIG_DISCONNECT, + NL80211_WOWLAN_TRIG_MAGIC_PKT, + NL80211_WOWLAN_TRIG_PKT_PATTERN, + NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, + NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, + NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, + NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, + NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + + /* keep last */ + NUM_NL80211_WOWLAN_TRIG, + MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 +}; + +/** + * enum nl80211_iface_limit_attrs - limit attributes + * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) + * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that + * can be chosen from this set of interface types (u32) + * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a + * flag attribute for each interface type in this set + * @NUM_NL80211_IFACE_LIMIT: number of attributes + * @MAX_NL80211_IFACE_LIMIT: highest attribute number + */ +enum nl80211_iface_limit_attrs { + NL80211_IFACE_LIMIT_UNSPEC, + NL80211_IFACE_LIMIT_MAX, + NL80211_IFACE_LIMIT_TYPES, + + /* keep last */ + NUM_NL80211_IFACE_LIMIT, + MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 +}; + +/** + * enum nl80211_if_combination_attrs -- interface combination attributes + * + * @NL80211_IFACE_COMB_UNSPEC: (reserved) + * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits + * for given interface types, see &enum nl80211_iface_limit_attrs. + * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of + * interfaces that can be created in this group. This number doesn't + * apply to interfaces purely managed in software, which are listed + * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. + * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that + * beacon intervals within this group must be all the same even for + * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt + * the infrastructure network's beacon interval. + * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many + * different channels may be used within this group. + * @NUM_NL80211_IFACE_COMB: number of attributes + * @MAX_NL80211_IFACE_COMB: highest attribute number + * + * Examples: + * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 + * => allows an AP and a STA that must match BIs + * + * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 + * => allows 8 of AP/GO + * + * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 + * => allows two STAs on different channels + * + * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 + * => allows a STA plus three P2P interfaces + * + * The list of these four possiblities could completely be contained + * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate + * that any of these groups must match. + * + * "Combinations" of just a single interface will not be listed here, + * a single interface of any valid interface type is assumed to always + * be possible by itself. This means that implicitly, for each valid + * interface type, the following group always exists: + * numbers = [ #{} <= 1 ], channels = 1, max = 1 + */ +enum nl80211_if_combination_attrs { + NL80211_IFACE_COMB_UNSPEC, + NL80211_IFACE_COMB_LIMITS, + NL80211_IFACE_COMB_MAXNUM, + NL80211_IFACE_COMB_STA_AP_BI_MATCH, + NL80211_IFACE_COMB_NUM_CHANNELS, + + /* keep last */ + NUM_NL80211_IFACE_COMB, + MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 +}; + + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existant mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + +#define NL80211_KCK_LEN 16 +#define NL80211_KEK_LEN 16 +#define NL80211_REPLAY_CTR_LEN 8 + +/** + * enum nl80211_rekey_data - attributes for GTK rekey offload + * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes + * @NL80211_REKEY_DATA_KEK: key encryption key (binary) + * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) + * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) + * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) + */ +enum nl80211_rekey_data { + __NL80211_REKEY_DATA_INVALID, + NL80211_REKEY_DATA_KEK, + NL80211_REKEY_DATA_KCK, + NL80211_REKEY_DATA_REPLAY_CTR, + + /* keep last */ + NUM_NL80211_REKEY_DATA, + MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 +}; + +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + +/* + * enum nl80211_ap_sme_features - device-integrated AP features + * Reserved for future use, no bits are defined in + * NL80211_ATTR_DEVICE_AP_SME yet. +enum nl80211_ap_sme_features { +}; + */ + +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, +}; + +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + +/* + * enum nl80211_btcoex_acl_role - Bluetooth ACL link role + * @NL80211_BTCOEX_ACL_ROLE_UNKNOWN: Bluetooth chip role unknown. + * @NL80211_BTCOEX_ACL_ROLE_MASTER: Bluetooth chip is in master role. + * @NL80211_BTCOEX_ACL_ROLE_SLAVE: Bluetooth chip is in slave role. + */ +enum nl80211_btcoex_acl_role { + NL80211_BTCOEX_ACL_ROLE_UNKNOWN, + NL80211_BTCOEX_ACL_ROLE_MASTER, + NL80211_BTCOEX_ACL_ROLE_SLAVE +}; +/** + * enum nl80211_btcoex_antenna_config - Bluetooth WiFi antenna configuration + * @NL80211_BTCOEX_ANTENNA_DA: Bluetooth and WiFI chip used dual antenna. + * @NL80211_BTCOEX_ANTENNA_SA: Bluetooth and WiFI chip used dual antenna. + */ +enum nl80211_btcoex_antenna_config { + NL80211_BTCOEX_ANTENNA_DA, + NL80211_BTCOEX_ANTENNA_SA, +}; +/** + * enum nl80211_btcoex_vendor_list - Bluetooth chip vendor list + * @NL80211_BTCOEX_VENDOR_DEFAULT: Uses default Bluetooth chip. + * @NL80211_BTCOEX_VENDOR_QCOM: Uses Qualcomm Bluetooth chip. + */ +enum nl80211_btcoex_vendor_list { + NL80211_BTCOEX_VENDOR_DEFAULT, + NL80211_BTCOEX_VENDOR_QCOM, +}; + +enum nl80211_btcoex_cmds { + NL80211_WMI_SET_BT_STATUS = 0, + NL80211_WMI_SET_BT_PARAMS, + NL80211_WMI_SET_BT_FT_ANT, + NL80211_WMI_SET_COLOCATED_BT_DEV, + NL80211_WMI_SET_BT_INQUIRY_PAGE_CONFIG, + NL80211_WMI_SET_BT_SCO_CONFIG, + NL80211_WMI_SET_BT_A2DP_CONFIG, + NL80211_WMI_SET_BT_ACLCOEX_CONFIG, + NL80211_WMI_SET_BT_DEBUG, + NL80211_WMI_SET_BT_OPSTATUS, + NL80211_WMI_GET_BT_CONFIG, + NL80211_WMI_GET_BT_STATS, + NL80211_WMI_BT_MAX, +}; +#endif /* __LINUX_NL80211_H */ diff --git a/include/compat/linux/of.h b/include/compat/linux/of.h new file mode 100755 index 0000000..c5dc87c --- /dev/null +++ b/include/compat/linux/of.h @@ -0,0 +1,16 @@ +#ifndef _COMPAT_LINUX_OF_H +#define _COMPAT_LINUX_OF_H 1 + +#include + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) +#include_next +#else + +#ifdef CONFIG_OF +#include_next +#endif /* CONFIG_OF */ + +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,34)) */ + +#endif /* _COMPAT_LINUX_OF_H */ diff --git a/include/compat/linux/pci-aspm.h b/include/compat/linux/pci-aspm.h new file mode 100755 index 0000000..2bc6efb --- /dev/null +++ b/include/compat/linux/pci-aspm.h @@ -0,0 +1,5 @@ +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) +#include_next +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */ diff --git a/include/compat/linux/pci_ids.h b/include/compat/linux/pci_ids.h new file mode 100755 index 0000000..c3dc899 --- /dev/null +++ b/include/compat/linux/pci_ids.h @@ -0,0 +1,2879 @@ +/* + * PCI Class, Vendor and Device IDs + * + * Please keep sorted. + * + * Do not add new entries to this file unless the definitions + * are shared between multiple drivers. + */ + +/* Device classes and subclasses */ + +#define PCI_CLASS_NOT_DEFINED 0x0000 +#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 + +#define PCI_BASE_CLASS_STORAGE 0x01 +#define PCI_CLASS_STORAGE_SCSI 0x0100 +#define PCI_CLASS_STORAGE_IDE 0x0101 +#define PCI_CLASS_STORAGE_FLOPPY 0x0102 +#define PCI_CLASS_STORAGE_IPI 0x0103 +#define PCI_CLASS_STORAGE_RAID 0x0104 +#define PCI_CLASS_STORAGE_SATA 0x0106 +#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601 +#define PCI_CLASS_STORAGE_SAS 0x0107 +#define PCI_CLASS_STORAGE_OTHER 0x0180 + +#define PCI_BASE_CLASS_NETWORK 0x02 +#define PCI_CLASS_NETWORK_ETHERNET 0x0200 +#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 +#define PCI_CLASS_NETWORK_FDDI 0x0202 +#define PCI_CLASS_NETWORK_ATM 0x0203 +#define PCI_CLASS_NETWORK_OTHER 0x0280 + +#define PCI_BASE_CLASS_DISPLAY 0x03 +#define PCI_CLASS_DISPLAY_VGA 0x0300 +#define PCI_CLASS_DISPLAY_XGA 0x0301 +#define PCI_CLASS_DISPLAY_3D 0x0302 +#define PCI_CLASS_DISPLAY_OTHER 0x0380 + +#define PCI_BASE_CLASS_MULTIMEDIA 0x04 +#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 +#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 +#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402 +#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 + +#define PCI_BASE_CLASS_MEMORY 0x05 +#define PCI_CLASS_MEMORY_RAM 0x0500 +#define PCI_CLASS_MEMORY_FLASH 0x0501 +#define PCI_CLASS_MEMORY_OTHER 0x0580 + +#define PCI_BASE_CLASS_BRIDGE 0x06 +#define PCI_CLASS_BRIDGE_HOST 0x0600 +#define PCI_CLASS_BRIDGE_ISA 0x0601 +#define PCI_CLASS_BRIDGE_EISA 0x0602 +#define PCI_CLASS_BRIDGE_MC 0x0603 +#define PCI_CLASS_BRIDGE_PCI 0x0604 +#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 +#define PCI_CLASS_BRIDGE_NUBUS 0x0606 +#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 +#define PCI_CLASS_BRIDGE_RACEWAY 0x0608 +#define PCI_CLASS_BRIDGE_OTHER 0x0680 + +#define PCI_BASE_CLASS_COMMUNICATION 0x07 +#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 +#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 +#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702 +#define PCI_CLASS_COMMUNICATION_MODEM 0x0703 +#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 + +#define PCI_BASE_CLASS_SYSTEM 0x08 +#define PCI_CLASS_SYSTEM_PIC 0x0800 +#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010 +#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020 +#define PCI_CLASS_SYSTEM_DMA 0x0801 +#define PCI_CLASS_SYSTEM_TIMER 0x0802 +#define PCI_CLASS_SYSTEM_RTC 0x0803 +#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804 +#define PCI_CLASS_SYSTEM_SDHCI 0x0805 +#define PCI_CLASS_SYSTEM_OTHER 0x0880 + +#define PCI_BASE_CLASS_INPUT 0x09 +#define PCI_CLASS_INPUT_KEYBOARD 0x0900 +#define PCI_CLASS_INPUT_PEN 0x0901 +#define PCI_CLASS_INPUT_MOUSE 0x0902 +#define PCI_CLASS_INPUT_SCANNER 0x0903 +#define PCI_CLASS_INPUT_GAMEPORT 0x0904 +#define PCI_CLASS_INPUT_OTHER 0x0980 + +#define PCI_BASE_CLASS_DOCKING 0x0a +#define PCI_CLASS_DOCKING_GENERIC 0x0a00 +#define PCI_CLASS_DOCKING_OTHER 0x0a80 + +#define PCI_BASE_CLASS_PROCESSOR 0x0b +#define PCI_CLASS_PROCESSOR_386 0x0b00 +#define PCI_CLASS_PROCESSOR_486 0x0b01 +#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 +#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 +#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 +#define PCI_CLASS_PROCESSOR_MIPS 0x0b30 +#define PCI_CLASS_PROCESSOR_CO 0x0b40 + +#define PCI_BASE_CLASS_SERIAL 0x0c +#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 +#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010 +#define PCI_CLASS_SERIAL_ACCESS 0x0c01 +#define PCI_CLASS_SERIAL_SSA 0x0c02 +#define PCI_CLASS_SERIAL_USB 0x0c03 +#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 +#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 +#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 +#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330 +#define PCI_CLASS_SERIAL_FIBER 0x0c04 +#define PCI_CLASS_SERIAL_SMBUS 0x0c05 + +#define PCI_BASE_CLASS_WIRELESS 0x0d +#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10 +#define PCI_CLASS_WIRELESS_WHCI 0x0d1010 + +#define PCI_BASE_CLASS_INTELLIGENT 0x0e +#define PCI_CLASS_INTELLIGENT_I2O 0x0e00 + +#define PCI_BASE_CLASS_SATELLITE 0x0f +#define PCI_CLASS_SATELLITE_TV 0x0f00 +#define PCI_CLASS_SATELLITE_AUDIO 0x0f01 +#define PCI_CLASS_SATELLITE_VOICE 0x0f03 +#define PCI_CLASS_SATELLITE_DATA 0x0f04 + +#define PCI_BASE_CLASS_CRYPT 0x10 +#define PCI_CLASS_CRYPT_NETWORK 0x1000 +#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001 +#define PCI_CLASS_CRYPT_OTHER 0x1080 + +#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11 +#define PCI_CLASS_SP_DPIO 0x1100 +#define PCI_CLASS_SP_OTHER 0x1180 + +#define PCI_CLASS_OTHERS 0xff + +/* Vendors and devices. Sort key: vendor first, device next. */ + +#define PCI_VENDOR_ID_TTTECH 0x0357 +#define PCI_DEVICE_ID_TTTECH_MC322 0x000a + +#define PCI_VENDOR_ID_DYNALINK 0x0675 +#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702 + +#define PCI_VENDOR_ID_BERKOM 0x0871 +#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1 +#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2 +#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 +#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 + +#define PCI_VENDOR_ID_COMPAQ 0x0e11 +#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 +#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc +#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10 +#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32 +#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34 +#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33 +#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35 +#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40 +#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43 +#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011 +#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060 +#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178 +#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46 +#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130 +#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150 + +#define PCI_VENDOR_ID_NCR 0x1000 +#define PCI_VENDOR_ID_LSI_LOGIC 0x1000 +#define PCI_DEVICE_ID_NCR_53C810 0x0001 +#define PCI_DEVICE_ID_NCR_53C820 0x0002 +#define PCI_DEVICE_ID_NCR_53C825 0x0003 +#define PCI_DEVICE_ID_NCR_53C815 0x0004 +#define PCI_DEVICE_ID_LSI_53C810AP 0x0005 +#define PCI_DEVICE_ID_NCR_53C860 0x0006 +#define PCI_DEVICE_ID_LSI_53C1510 0x000a +#define PCI_DEVICE_ID_NCR_53C896 0x000b +#define PCI_DEVICE_ID_NCR_53C895 0x000c +#define PCI_DEVICE_ID_NCR_53C885 0x000d +#define PCI_DEVICE_ID_NCR_53C875 0x000f +#define PCI_DEVICE_ID_NCR_53C1510 0x0010 +#define PCI_DEVICE_ID_LSI_53C895A 0x0012 +#define PCI_DEVICE_ID_LSI_53C875A 0x0013 +#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020 +#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021 +#define PCI_DEVICE_ID_LSI_53C1030 0x0030 +#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032 +#define PCI_DEVICE_ID_LSI_53C1035 0x0040 +#define PCI_DEVICE_ID_NCR_53C875J 0x008f +#define PCI_DEVICE_ID_LSI_FC909 0x0621 +#define PCI_DEVICE_ID_LSI_FC929 0x0622 +#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623 +#define PCI_DEVICE_ID_LSI_FC919 0x0624 +#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625 +#define PCI_DEVICE_ID_LSI_FC929X 0x0626 +#define PCI_DEVICE_ID_LSI_FC939X 0x0642 +#define PCI_DEVICE_ID_LSI_FC949X 0x0640 +#define PCI_DEVICE_ID_LSI_FC949ES 0x0646 +#define PCI_DEVICE_ID_LSI_FC919X 0x0628 +#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701 +#define PCI_DEVICE_ID_LSI_61C102 0x0901 +#define PCI_DEVICE_ID_LSI_63C815 0x1000 +#define PCI_DEVICE_ID_LSI_SAS1064 0x0050 +#define PCI_DEVICE_ID_LSI_SAS1064R 0x0411 +#define PCI_DEVICE_ID_LSI_SAS1066 0x005E +#define PCI_DEVICE_ID_LSI_SAS1068 0x0054 +#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C +#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056 +#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A +#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058 +#define PCI_DEVICE_ID_LSI_SAS1078 0x0060 + +#define PCI_VENDOR_ID_ATI 0x1002 +/* Mach64 */ +#define PCI_DEVICE_ID_ATI_68800 0x4158 +#define PCI_DEVICE_ID_ATI_215CT222 0x4354 +#define PCI_DEVICE_ID_ATI_210888CX 0x4358 +#define PCI_DEVICE_ID_ATI_215ET222 0x4554 +/* Mach64 / Rage */ +#define PCI_DEVICE_ID_ATI_215GB 0x4742 +#define PCI_DEVICE_ID_ATI_215GD 0x4744 +#define PCI_DEVICE_ID_ATI_215GI 0x4749 +#define PCI_DEVICE_ID_ATI_215GP 0x4750 +#define PCI_DEVICE_ID_ATI_215GQ 0x4751 +#define PCI_DEVICE_ID_ATI_215XL 0x4752 +#define PCI_DEVICE_ID_ATI_215GT 0x4754 +#define PCI_DEVICE_ID_ATI_215GTB 0x4755 +#define PCI_DEVICE_ID_ATI_215_IV 0x4756 +#define PCI_DEVICE_ID_ATI_215_IW 0x4757 +#define PCI_DEVICE_ID_ATI_215_IZ 0x475A +#define PCI_DEVICE_ID_ATI_210888GX 0x4758 +#define PCI_DEVICE_ID_ATI_215_LB 0x4c42 +#define PCI_DEVICE_ID_ATI_215_LD 0x4c44 +#define PCI_DEVICE_ID_ATI_215_LG 0x4c47 +#define PCI_DEVICE_ID_ATI_215_LI 0x4c49 +#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D +#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E +#define PCI_DEVICE_ID_ATI_215_LR 0x4c52 +#define PCI_DEVICE_ID_ATI_215_LS 0x4c53 +#define PCI_DEVICE_ID_ATI_264_LT 0x4c54 +/* Mach64 VT */ +#define PCI_DEVICE_ID_ATI_264VT 0x5654 +#define PCI_DEVICE_ID_ATI_264VU 0x5655 +#define PCI_DEVICE_ID_ATI_264VV 0x5656 +/* Rage128 GL */ +#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245 +#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246 +#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247 +/* Rage128 VR */ +#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b +#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c +#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345 +#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346 +#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347 +#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348 +#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b +#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c +#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d +#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e +/* Rage128 Ultra */ +#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446 +#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c +#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 +#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453 +#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454 +#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455 +/* Rage128 M3 */ +#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45 +#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46 +/* Rage128 M4 */ +#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46 +#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c +/* Rage128 Pro GL */ +#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041 +#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042 +#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043 +#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044 +#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045 +#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 +/* Rage128 Pro VR */ +#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047 +#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048 +#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049 +#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A +#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B +#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C +#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D +#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E +#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F +#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050 +#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051 +#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052 +#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053 +#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054 +#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055 +#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056 +#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057 +#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058 +/* Rage128 M4 */ +/* Radeon R100 */ +#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144 +#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145 +#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146 +#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147 +/* Radeon RV100 (VE) */ +#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 +#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a +/* Radeon R200 (8500) */ +#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c +#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e +#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f +#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c +#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242 +/* Radeon R200 (9100) */ +#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d +/* Radeon RV200 (7500) */ +#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157 +#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158 +/* Radeon NV-100 */ +/* Radeon RV250 (9000) */ +#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964 +#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965 +#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966 +#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967 +/* Radeon RV280 (9200) */ +#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961 +#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964 +/* Radeon R300 (9500) */ +/* Radeon R300 (9700) */ +#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44 +#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45 +#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46 +#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47 +/* Radeon R350 (9800) */ +/* Radeon RV350 (9600) */ +/* Radeon M6 */ +#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59 +#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a +/* Radeon M7 */ +#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57 +#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58 +/* Radeon M9 */ +#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64 +#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65 +#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66 +#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67 +/* Radeon */ +/* RadeonIGP */ +#define PCI_DEVICE_ID_ATI_RS100 0xcab0 +#define PCI_DEVICE_ID_ATI_RS200 0xcab2 +#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2 +#define PCI_DEVICE_ID_ATI_RS250 0xcab3 +#define PCI_DEVICE_ID_ATI_RS300_100 0x5830 +#define PCI_DEVICE_ID_ATI_RS300_133 0x5831 +#define PCI_DEVICE_ID_ATI_RS300_166 0x5832 +#define PCI_DEVICE_ID_ATI_RS300_200 0x5833 +#define PCI_DEVICE_ID_ATI_RS350_100 0x7830 +#define PCI_DEVICE_ID_ATI_RS350_133 0x7831 +#define PCI_DEVICE_ID_ATI_RS350_166 0x7832 +#define PCI_DEVICE_ID_ATI_RS350_200 0x7833 +#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30 +#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31 +#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32 +#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33 +#define PCI_DEVICE_ID_ATI_RS480 0x5950 +/* ATI IXP Chipset */ +#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349 +#define PCI_DEVICE_ID_ATI_IXP200_SMBUS 0x4353 +#define PCI_DEVICE_ID_ATI_IXP300_SMBUS 0x4363 +#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369 +#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e +#define PCI_DEVICE_ID_ATI_IXP400_SMBUS 0x4372 +#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376 +#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379 +#define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a +#define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380 +#define PCI_DEVICE_ID_ATI_SBX00_SMBUS 0x4385 +#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c +#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390 +#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c + +#define PCI_VENDOR_ID_VLSI 0x1004 +#define PCI_DEVICE_ID_VLSI_82C592 0x0005 +#define PCI_DEVICE_ID_VLSI_82C593 0x0006 +#define PCI_DEVICE_ID_VLSI_82C594 0x0007 +#define PCI_DEVICE_ID_VLSI_82C597 0x0009 +#define PCI_DEVICE_ID_VLSI_82C541 0x000c +#define PCI_DEVICE_ID_VLSI_82C543 0x000d +#define PCI_DEVICE_ID_VLSI_82C532 0x0101 +#define PCI_DEVICE_ID_VLSI_82C534 0x0102 +#define PCI_DEVICE_ID_VLSI_82C535 0x0104 +#define PCI_DEVICE_ID_VLSI_82C147 0x0105 +#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702 + +/* AMD RD890 Chipset */ +#define PCI_DEVICE_ID_RD890_IOMMU 0x5a23 + +#define PCI_VENDOR_ID_ADL 0x1005 +#define PCI_DEVICE_ID_ADL_2301 0x2301 + +#define PCI_VENDOR_ID_NS 0x100b +#define PCI_DEVICE_ID_NS_87415 0x0002 +#define PCI_DEVICE_ID_NS_87560_LIO 0x000e +#define PCI_DEVICE_ID_NS_87560_USB 0x0012 +#define PCI_DEVICE_ID_NS_83815 0x0020 +#define PCI_DEVICE_ID_NS_83820 0x0022 +#define PCI_DEVICE_ID_NS_CS5535_ISA 0x002b +#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d +#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e +#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f +#define PCI_DEVICE_ID_NS_GX_VIDEO 0x0030 +#define PCI_DEVICE_ID_NS_SATURN 0x0035 +#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500 +#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501 +#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502 +#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503 +#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504 +#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505 +#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510 +#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511 +#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515 +#define PCI_DEVICE_ID_NS_87410 0xd001 + +#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE 0x0028 + +#define PCI_VENDOR_ID_TSENG 0x100c +#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202 +#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205 +#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206 +#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207 +#define PCI_DEVICE_ID_TSENG_ET6000 0x3208 + +#define PCI_VENDOR_ID_WEITEK 0x100e +#define PCI_DEVICE_ID_WEITEK_P9000 0x9001 +#define PCI_DEVICE_ID_WEITEK_P9100 0x9100 + +#define PCI_VENDOR_ID_DEC 0x1011 +#define PCI_DEVICE_ID_DEC_BRD 0x0001 +#define PCI_DEVICE_ID_DEC_TULIP 0x0002 +#define PCI_DEVICE_ID_DEC_TGA 0x0004 +#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009 +#define PCI_DEVICE_ID_DEC_TGA2 0x000D +#define PCI_DEVICE_ID_DEC_FDDI 0x000F +#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014 +#define PCI_DEVICE_ID_DEC_21142 0x0019 +#define PCI_DEVICE_ID_DEC_21052 0x0021 +#define PCI_DEVICE_ID_DEC_21150 0x0022 +#define PCI_DEVICE_ID_DEC_21152 0x0024 +#define PCI_DEVICE_ID_DEC_21153 0x0025 +#define PCI_DEVICE_ID_DEC_21154 0x0026 +#define PCI_DEVICE_ID_DEC_21285 0x1065 +#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046 + +#define PCI_VENDOR_ID_CIRRUS 0x1013 +#define PCI_DEVICE_ID_CIRRUS_7548 0x0038 +#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0 +#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4 +#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8 +#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac +#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8 +#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc +#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0 +#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4 +#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6 +#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 +#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 +#define PCI_DEVICE_ID_CIRRUS_7543 0x1202 +#define PCI_DEVICE_ID_CIRRUS_4610 0x6001 +#define PCI_DEVICE_ID_CIRRUS_4612 0x6003 +#define PCI_DEVICE_ID_CIRRUS_4615 0x6004 + +#define PCI_VENDOR_ID_IBM 0x1014 +#define PCI_DEVICE_ID_IBM_TR 0x0018 +#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e +#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc +#define PCI_DEVICE_ID_IBM_SNIPE 0x0180 +#define PCI_DEVICE_ID_IBM_CITRINE 0x028C +#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166 +#define PCI_DEVICE_ID_IBM_OBSIDIAN 0x02BD +#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031 +#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 +#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A +#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 +#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 +#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 + +#define PCI_SUBVENDOR_ID_IBM 0x1014 +#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4 + +#define PCI_VENDOR_ID_UNISYS 0x1018 +#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C + +#define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */ +#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 + +#define PCI_VENDOR_ID_WD 0x101c +#define PCI_DEVICE_ID_WD_90C 0xc24a + +#define PCI_VENDOR_ID_AMI 0x101e +#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960 +#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010 +#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060 + +#define PCI_VENDOR_ID_AMD 0x1022 +#define PCI_DEVICE_ID_AMD_K8_NB 0x1100 +#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP 0x1101 +#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL 0x1102 +#define PCI_DEVICE_ID_AMD_K8_NB_MISC 0x1103 +#define PCI_DEVICE_ID_AMD_10H_NB_HT 0x1200 +#define PCI_DEVICE_ID_AMD_10H_NB_MAP 0x1201 +#define PCI_DEVICE_ID_AMD_10H_NB_DRAM 0x1202 +#define PCI_DEVICE_ID_AMD_10H_NB_MISC 0x1203 +#define PCI_DEVICE_ID_AMD_10H_NB_LINK 0x1204 +#define PCI_DEVICE_ID_AMD_11H_NB_HT 0x1300 +#define PCI_DEVICE_ID_AMD_11H_NB_MAP 0x1301 +#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 +#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 +#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 +#define PCI_DEVICE_ID_AMD_LANCE 0x2000 +#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 +#define PCI_DEVICE_ID_AMD_SCSI 0x2020 +#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0 +#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006 +#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007 +#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C +#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E +#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401 +#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409 +#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B +#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410 +#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 +#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 +#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440 +#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 +#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 +#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443 +#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 +#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 +#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 +#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 +#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a +#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b +#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d +#define PCI_DEVICE_ID_AMD_8151_0 0x7454 +#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 +#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 +#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F +#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 +#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 +#define PCI_DEVICE_ID_AMD_CS5536_AUDIO 0x2093 +#define PCI_DEVICE_ID_AMD_CS5536_OHC 0x2094 +#define PCI_DEVICE_ID_AMD_CS5536_EHC 0x2095 +#define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096 +#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097 +#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A +#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 +#define PCI_DEVICE_ID_AMD_LX_AES 0x2082 +#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c +#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 + +#define PCI_VENDOR_ID_TRIDENT 0x1023 +#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 +#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 +#define PCI_DEVICE_ID_TRIDENT_9320 0x9320 +#define PCI_DEVICE_ID_TRIDENT_9388 0x9388 +#define PCI_DEVICE_ID_TRIDENT_9397 0x9397 +#define PCI_DEVICE_ID_TRIDENT_939A 0x939A +#define PCI_DEVICE_ID_TRIDENT_9520 0x9520 +#define PCI_DEVICE_ID_TRIDENT_9525 0x9525 +#define PCI_DEVICE_ID_TRIDENT_9420 0x9420 +#define PCI_DEVICE_ID_TRIDENT_9440 0x9440 +#define PCI_DEVICE_ID_TRIDENT_9660 0x9660 +#define PCI_DEVICE_ID_TRIDENT_9750 0x9750 +#define PCI_DEVICE_ID_TRIDENT_9850 0x9850 +#define PCI_DEVICE_ID_TRIDENT_9880 0x9880 +#define PCI_DEVICE_ID_TRIDENT_8400 0x8400 +#define PCI_DEVICE_ID_TRIDENT_8420 0x8420 +#define PCI_DEVICE_ID_TRIDENT_8500 0x8500 + +#define PCI_VENDOR_ID_AI 0x1025 +#define PCI_DEVICE_ID_AI_M1435 0x1435 + +#define PCI_VENDOR_ID_DELL 0x1028 +#define PCI_DEVICE_ID_DELL_RACIII 0x0008 +#define PCI_DEVICE_ID_DELL_RAC4 0x0012 +#define PCI_DEVICE_ID_DELL_PERC5 0x0015 + +#define PCI_VENDOR_ID_MATROX 0x102B +#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518 +#define PCI_DEVICE_ID_MATROX_MIL 0x0519 +#define PCI_DEVICE_ID_MATROX_MYS 0x051A +#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b +#define PCI_DEVICE_ID_MATROX_MYS_AGP 0x051e +#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f +#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10 +#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000 +#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001 +#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 +#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 +#define PCI_DEVICE_ID_MATROX_G400 0x0525 +#define PCI_DEVICE_ID_MATROX_G200EV_PCI 0x0530 +#define PCI_DEVICE_ID_MATROX_G550 0x2527 +#define PCI_DEVICE_ID_MATROX_VIA 0x4536 + +#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2 + +#define PCI_VENDOR_ID_CT 0x102c +#define PCI_DEVICE_ID_CT_69000 0x00c0 +#define PCI_DEVICE_ID_CT_65545 0x00d8 +#define PCI_DEVICE_ID_CT_65548 0x00dc +#define PCI_DEVICE_ID_CT_65550 0x00e0 +#define PCI_DEVICE_ID_CT_65554 0x00e4 +#define PCI_DEVICE_ID_CT_65555 0x00e5 + +#define PCI_VENDOR_ID_MIRO 0x1031 +#define PCI_DEVICE_ID_MIRO_36050 0x5601 +#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe +#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801 + +#define PCI_VENDOR_ID_NEC 0x1033 +#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */ +#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */ +#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */ +#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */ +#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */ +#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */ +#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */ +#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */ +#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */ +#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */ +#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */ +#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */ +#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */ +#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b +#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e +#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */ +#define PCI_DEVICE_ID_NEC_VRC5476 0x009b +#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5 +#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6 +#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */ +#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */ + +#define PCI_VENDOR_ID_FD 0x1036 +#define PCI_DEVICE_ID_FD_36C70 0x0000 + +#define PCI_VENDOR_ID_SI 0x1039 +#define PCI_DEVICE_ID_SI_5591_AGP 0x0001 +#define PCI_DEVICE_ID_SI_6202 0x0002 +#define PCI_DEVICE_ID_SI_503 0x0008 +#define PCI_DEVICE_ID_SI_ACPI 0x0009 +#define PCI_DEVICE_ID_SI_SMBUS 0x0016 +#define PCI_DEVICE_ID_SI_LPC 0x0018 +#define PCI_DEVICE_ID_SI_5597_VGA 0x0200 +#define PCI_DEVICE_ID_SI_6205 0x0205 +#define PCI_DEVICE_ID_SI_501 0x0406 +#define PCI_DEVICE_ID_SI_496 0x0496 +#define PCI_DEVICE_ID_SI_300 0x0300 +#define PCI_DEVICE_ID_SI_315H 0x0310 +#define PCI_DEVICE_ID_SI_315 0x0315 +#define PCI_DEVICE_ID_SI_315PRO 0x0325 +#define PCI_DEVICE_ID_SI_530 0x0530 +#define PCI_DEVICE_ID_SI_540 0x0540 +#define PCI_DEVICE_ID_SI_550 0x0550 +#define PCI_DEVICE_ID_SI_540_VGA 0x5300 +#define PCI_DEVICE_ID_SI_550_VGA 0x5315 +#define PCI_DEVICE_ID_SI_620 0x0620 +#define PCI_DEVICE_ID_SI_630 0x0630 +#define PCI_DEVICE_ID_SI_633 0x0633 +#define PCI_DEVICE_ID_SI_635 0x0635 +#define PCI_DEVICE_ID_SI_640 0x0640 +#define PCI_DEVICE_ID_SI_645 0x0645 +#define PCI_DEVICE_ID_SI_646 0x0646 +#define PCI_DEVICE_ID_SI_648 0x0648 +#define PCI_DEVICE_ID_SI_650 0x0650 +#define PCI_DEVICE_ID_SI_651 0x0651 +#define PCI_DEVICE_ID_SI_655 0x0655 +#define PCI_DEVICE_ID_SI_661 0x0661 +#define PCI_DEVICE_ID_SI_730 0x0730 +#define PCI_DEVICE_ID_SI_733 0x0733 +#define PCI_DEVICE_ID_SI_630_VGA 0x6300 +#define PCI_DEVICE_ID_SI_735 0x0735 +#define PCI_DEVICE_ID_SI_740 0x0740 +#define PCI_DEVICE_ID_SI_741 0x0741 +#define PCI_DEVICE_ID_SI_745 0x0745 +#define PCI_DEVICE_ID_SI_746 0x0746 +#define PCI_DEVICE_ID_SI_755 0x0755 +#define PCI_DEVICE_ID_SI_760 0x0760 +#define PCI_DEVICE_ID_SI_900 0x0900 +#define PCI_DEVICE_ID_SI_961 0x0961 +#define PCI_DEVICE_ID_SI_962 0x0962 +#define PCI_DEVICE_ID_SI_963 0x0963 +#define PCI_DEVICE_ID_SI_965 0x0965 +#define PCI_DEVICE_ID_SI_966 0x0966 +#define PCI_DEVICE_ID_SI_968 0x0968 +#define PCI_DEVICE_ID_SI_1180 0x1180 +#define PCI_DEVICE_ID_SI_5511 0x5511 +#define PCI_DEVICE_ID_SI_5513 0x5513 +#define PCI_DEVICE_ID_SI_5517 0x5517 +#define PCI_DEVICE_ID_SI_5518 0x5518 +#define PCI_DEVICE_ID_SI_5571 0x5571 +#define PCI_DEVICE_ID_SI_5581 0x5581 +#define PCI_DEVICE_ID_SI_5582 0x5582 +#define PCI_DEVICE_ID_SI_5591 0x5591 +#define PCI_DEVICE_ID_SI_5596 0x5596 +#define PCI_DEVICE_ID_SI_5597 0x5597 +#define PCI_DEVICE_ID_SI_5598 0x5598 +#define PCI_DEVICE_ID_SI_5600 0x5600 +#define PCI_DEVICE_ID_SI_7012 0x7012 +#define PCI_DEVICE_ID_SI_7013 0x7013 +#define PCI_DEVICE_ID_SI_7016 0x7016 +#define PCI_DEVICE_ID_SI_7018 0x7018 + +#define PCI_VENDOR_ID_HP 0x103c +#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 +#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 +#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 +#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a +#define PCI_DEVICE_ID_HP_TACHYON 0x1028 +#define PCI_DEVICE_ID_HP_TACHLITE 0x1029 +#define PCI_DEVICE_ID_HP_J2585A 0x1030 +#define PCI_DEVICE_ID_HP_J2585B 0x1031 +#define PCI_DEVICE_ID_HP_J2973A 0x1040 +#define PCI_DEVICE_ID_HP_J2970A 0x1042 +#define PCI_DEVICE_ID_HP_DIVA 0x1048 +#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049 +#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A +#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B +#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1 +#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b +#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223 +#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226 +#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227 +#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a +#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e +#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c +#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 +#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 +#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 +#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a +#define PCI_DEVICE_ID_HP_CISSA 0x3220 +#define PCI_DEVICE_ID_HP_CISSC 0x3230 +#define PCI_DEVICE_ID_HP_CISSD 0x3238 +#define PCI_DEVICE_ID_HP_CISSE 0x323a +#define PCI_DEVICE_ID_HP_CISSF 0x323b +#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 + +#define PCI_VENDOR_ID_PCTECH 0x1042 +#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 +#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001 +#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020 + +#define PCI_VENDOR_ID_ASUSTEK 0x1043 +#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675 + +#define PCI_VENDOR_ID_DPT 0x1044 +#define PCI_DEVICE_ID_DPT 0xa400 + +#define PCI_VENDOR_ID_OPTI 0x1045 +#define PCI_DEVICE_ID_OPTI_82C558 0xc558 +#define PCI_DEVICE_ID_OPTI_82C621 0xc621 +#define PCI_DEVICE_ID_OPTI_82C700 0xc700 +#define PCI_DEVICE_ID_OPTI_82C825 0xd568 + +#define PCI_VENDOR_ID_ELSA 0x1048 +#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000 +#define PCI_DEVICE_ID_ELSA_QS3000 0x3000 + +#define PCI_VENDOR_ID_STMICRO 0x104A + +#define PCI_VENDOR_ID_BUSLOGIC 0x104B +#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 +#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040 +#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130 + +#define PCI_VENDOR_ID_TI 0x104c +#define PCI_DEVICE_ID_TI_TVP4020 0x3d07 +#define PCI_DEVICE_ID_TI_4450 0x8011 +#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031 +#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033 +#define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034 +#define PCI_DEVICE_ID_TI_X515 0x8036 +#define PCI_DEVICE_ID_TI_XX12 0x8039 +#define PCI_DEVICE_ID_TI_XX12_FM 0x803b +#define PCI_DEVICE_ID_TI_XIO2000A 0x8231 +#define PCI_DEVICE_ID_TI_1130 0xac12 +#define PCI_DEVICE_ID_TI_1031 0xac13 +#define PCI_DEVICE_ID_TI_1131 0xac15 +#define PCI_DEVICE_ID_TI_1250 0xac16 +#define PCI_DEVICE_ID_TI_1220 0xac17 +#define PCI_DEVICE_ID_TI_1221 0xac19 +#define PCI_DEVICE_ID_TI_1210 0xac1a +#define PCI_DEVICE_ID_TI_1450 0xac1b +#define PCI_DEVICE_ID_TI_1225 0xac1c +#define PCI_DEVICE_ID_TI_1251A 0xac1d +#define PCI_DEVICE_ID_TI_1211 0xac1e +#define PCI_DEVICE_ID_TI_1251B 0xac1f +#define PCI_DEVICE_ID_TI_4410 0xac41 +#define PCI_DEVICE_ID_TI_4451 0xac42 +#define PCI_DEVICE_ID_TI_4510 0xac44 +#define PCI_DEVICE_ID_TI_4520 0xac46 +#define PCI_DEVICE_ID_TI_7510 0xac47 +#define PCI_DEVICE_ID_TI_7610 0xac48 +#define PCI_DEVICE_ID_TI_7410 0xac49 +#define PCI_DEVICE_ID_TI_1410 0xac50 +#define PCI_DEVICE_ID_TI_1420 0xac51 +#define PCI_DEVICE_ID_TI_1451A 0xac52 +#define PCI_DEVICE_ID_TI_1620 0xac54 +#define PCI_DEVICE_ID_TI_1520 0xac55 +#define PCI_DEVICE_ID_TI_1510 0xac56 +#define PCI_DEVICE_ID_TI_X620 0xac8d +#define PCI_DEVICE_ID_TI_X420 0xac8e +#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f + +#define PCI_VENDOR_ID_SONY 0x104d + +/* Winbond have two vendor IDs! See 0x10ad as well */ +#define PCI_VENDOR_ID_WINBOND2 0x1050 +#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a +#define PCI_DEVICE_ID_WINBOND2_6692 0x6692 + +#define PCI_VENDOR_ID_ANIGMA 0x1051 +#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100 + +#define PCI_VENDOR_ID_EFAR 0x1055 +#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130 +#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463 + +#define PCI_VENDOR_ID_MOTOROLA 0x1057 +#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001 +#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 +#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 +#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801 +#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802 +#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803 +#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b +#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803 +#define PCI_DEVICE_ID_MOTOROLA_MPC5200B 0x5809 + +#define PCI_VENDOR_ID_PROMISE 0x105a +#define PCI_DEVICE_ID_PROMISE_20265 0x0d30 +#define PCI_DEVICE_ID_PROMISE_20267 0x4d30 +#define PCI_DEVICE_ID_PROMISE_20246 0x4d33 +#define PCI_DEVICE_ID_PROMISE_20262 0x4d38 +#define PCI_DEVICE_ID_PROMISE_20263 0x0D38 +#define PCI_DEVICE_ID_PROMISE_20268 0x4d68 +#define PCI_DEVICE_ID_PROMISE_20269 0x4d69 +#define PCI_DEVICE_ID_PROMISE_20270 0x6268 +#define PCI_DEVICE_ID_PROMISE_20271 0x6269 +#define PCI_DEVICE_ID_PROMISE_20275 0x1275 +#define PCI_DEVICE_ID_PROMISE_20276 0x5275 +#define PCI_DEVICE_ID_PROMISE_20277 0x7275 + +#define PCI_VENDOR_ID_FOXCONN 0x105b + +#define PCI_VENDOR_ID_UMC 0x1060 +#define PCI_DEVICE_ID_UMC_UM8673F 0x0101 +#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a +#define PCI_DEVICE_ID_UMC_UM8886A 0x886a + +#define PCI_VENDOR_ID_PICOPOWER 0x1066 +#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002 +#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002 + +#define PCI_VENDOR_ID_MYLEX 0x1069 +#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001 +#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002 +#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010 +#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020 +#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050 +#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56 +#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166 + +#define PCI_VENDOR_ID_APPLE 0x106b +#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001 +#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e +#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018 +#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020 +#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021 +#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024 +#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 +#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d +#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e +#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 +#define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033 +#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 +#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b +#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043 +#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b +#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c +#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050 +#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 +#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 +#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 +#define PCI_DEVICE_ID_APPLE_U4_PCIE 0x005b +#define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066 +#define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069 +#define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a +#define PCI_DEVICE_ID_APPLE_IPID2_GMAC 0x006b +#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645 + +#define PCI_VENDOR_ID_YAMAHA 0x1073 +#define PCI_DEVICE_ID_YAMAHA_724 0x0004 +#define PCI_DEVICE_ID_YAMAHA_724F 0x000d +#define PCI_DEVICE_ID_YAMAHA_740 0x000a +#define PCI_DEVICE_ID_YAMAHA_740C 0x000c +#define PCI_DEVICE_ID_YAMAHA_744 0x0010 +#define PCI_DEVICE_ID_YAMAHA_754 0x0012 + +#define PCI_VENDOR_ID_QLOGIC 0x1077 +#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016 +#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020 +#define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080 +#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216 +#define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240 +#define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280 +#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100 +#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200 +#define PCI_DEVICE_ID_QLOGIC_ISP2300 0x2300 +#define PCI_DEVICE_ID_QLOGIC_ISP2312 0x2312 +#define PCI_DEVICE_ID_QLOGIC_ISP2322 0x2322 +#define PCI_DEVICE_ID_QLOGIC_ISP6312 0x6312 +#define PCI_DEVICE_ID_QLOGIC_ISP6322 0x6322 +#define PCI_DEVICE_ID_QLOGIC_ISP2422 0x2422 +#define PCI_DEVICE_ID_QLOGIC_ISP2432 0x2432 +#define PCI_DEVICE_ID_QLOGIC_ISP2512 0x2512 +#define PCI_DEVICE_ID_QLOGIC_ISP2522 0x2522 +#define PCI_DEVICE_ID_QLOGIC_ISP5422 0x5422 +#define PCI_DEVICE_ID_QLOGIC_ISP5432 0x5432 + +#define PCI_VENDOR_ID_CYRIX 0x1078 +#define PCI_DEVICE_ID_CYRIX_5510 0x0000 +#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001 +#define PCI_DEVICE_ID_CYRIX_5520 0x0002 +#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100 +#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102 +#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103 +#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104 + +#define PCI_VENDOR_ID_CONTAQ 0x1080 +#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693 + +#define PCI_VENDOR_ID_OLICOM 0x108d +#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012 +#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013 +#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014 + +#define PCI_VENDOR_ID_SUN 0x108e +#define PCI_DEVICE_ID_SUN_EBUS 0x1000 +#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001 +#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100 +#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101 +#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102 +#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103 +#define PCI_DEVICE_ID_SUN_GEM 0x2bad +#define PCI_DEVICE_ID_SUN_SIMBA 0x5000 +#define PCI_DEVICE_ID_SUN_PBM 0x8000 +#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001 +#define PCI_DEVICE_ID_SUN_SABRE 0xa000 +#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001 +#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801 +#define PCI_DEVICE_ID_SUN_CASSINI 0xabba + +#define PCI_VENDOR_ID_NI 0x1093 +#define PCI_DEVICE_ID_NI_PCI2322 0xd130 +#define PCI_DEVICE_ID_NI_PCI2324 0xd140 +#define PCI_DEVICE_ID_NI_PCI2328 0xd150 +#define PCI_DEVICE_ID_NI_PXI8422_2322 0xd190 +#define PCI_DEVICE_ID_NI_PXI8422_2324 0xd1a0 +#define PCI_DEVICE_ID_NI_PXI8420_2322 0xd1d0 +#define PCI_DEVICE_ID_NI_PXI8420_2324 0xd1e0 +#define PCI_DEVICE_ID_NI_PXI8420_2328 0xd1f0 +#define PCI_DEVICE_ID_NI_PXI8420_23216 0xd1f1 +#define PCI_DEVICE_ID_NI_PCI2322I 0xd250 +#define PCI_DEVICE_ID_NI_PCI2324I 0xd270 +#define PCI_DEVICE_ID_NI_PCI23216 0xd2b0 +#define PCI_DEVICE_ID_NI_PXI8430_2322 0x7080 +#define PCI_DEVICE_ID_NI_PCI8430_2322 0x70db +#define PCI_DEVICE_ID_NI_PXI8430_2324 0x70dd +#define PCI_DEVICE_ID_NI_PCI8430_2324 0x70df +#define PCI_DEVICE_ID_NI_PXI8430_2328 0x70e2 +#define PCI_DEVICE_ID_NI_PCI8430_2328 0x70e4 +#define PCI_DEVICE_ID_NI_PXI8430_23216 0x70e6 +#define PCI_DEVICE_ID_NI_PCI8430_23216 0x70e7 +#define PCI_DEVICE_ID_NI_PXI8432_2322 0x70e8 +#define PCI_DEVICE_ID_NI_PCI8432_2322 0x70ea +#define PCI_DEVICE_ID_NI_PXI8432_2324 0x70ec +#define PCI_DEVICE_ID_NI_PCI8432_2324 0x70ee + +#define PCI_VENDOR_ID_CMD 0x1095 +#define PCI_DEVICE_ID_CMD_643 0x0643 +#define PCI_DEVICE_ID_CMD_646 0x0646 +#define PCI_DEVICE_ID_CMD_648 0x0648 +#define PCI_DEVICE_ID_CMD_649 0x0649 + +#define PCI_DEVICE_ID_SII_680 0x0680 +#define PCI_DEVICE_ID_SII_3112 0x3112 +#define PCI_DEVICE_ID_SII_1210SA 0x0240 + +#define PCI_VENDOR_ID_BROOKTREE 0x109e +#define PCI_DEVICE_ID_BROOKTREE_878 0x0878 +#define PCI_DEVICE_ID_BROOKTREE_879 0x0879 + +#define PCI_VENDOR_ID_SGI 0x10a9 +#define PCI_DEVICE_ID_SGI_IOC3 0x0003 +#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 +#define PCI_DEVICE_ID_SGI_IOC4 0x100a + +#define PCI_VENDOR_ID_WINBOND 0x10ad +#define PCI_DEVICE_ID_WINBOND_82C105 0x0105 +#define PCI_DEVICE_ID_WINBOND_83C553 0x0565 + +#define PCI_VENDOR_ID_PLX 0x10b5 +#define PCI_DEVICE_ID_PLX_R685 0x1030 +#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a +#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076 +#define PCI_DEVICE_ID_PLX_1077 0x1077 +#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103 +#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 +#define PCI_DEVICE_ID_PLX_R753 0x1152 +#define PCI_DEVICE_ID_PLX_OLITEC 0x1187 +#define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196 +#define PCI_DEVICE_ID_PLX_9030 0x9030 +#define PCI_DEVICE_ID_PLX_9050 0x9050 +#define PCI_DEVICE_ID_PLX_9056 0x9056 +#define PCI_DEVICE_ID_PLX_9080 0x9080 +#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 + +#define PCI_VENDOR_ID_MADGE 0x10b6 +#define PCI_DEVICE_ID_MADGE_MK2 0x0002 + +#define PCI_VENDOR_ID_3COM 0x10b7 +#define PCI_DEVICE_ID_3COM_3C985 0x0001 +#define PCI_DEVICE_ID_3COM_3C940 0x1700 +#define PCI_DEVICE_ID_3COM_3C339 0x3390 +#define PCI_DEVICE_ID_3COM_3C359 0x3590 +#define PCI_DEVICE_ID_3COM_3C940B 0x80eb +#define PCI_DEVICE_ID_3COM_3CR990 0x9900 +#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902 +#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903 +#define PCI_DEVICE_ID_3COM_3CR990B 0x9904 +#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905 +#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908 +#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909 +#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a + +#define PCI_VENDOR_ID_AL 0x10b9 +#define PCI_DEVICE_ID_AL_M1533 0x1533 +#define PCI_DEVICE_ID_AL_M1535 0x1535 +#define PCI_DEVICE_ID_AL_M1541 0x1541 +#define PCI_DEVICE_ID_AL_M1563 0x1563 +#define PCI_DEVICE_ID_AL_M1621 0x1621 +#define PCI_DEVICE_ID_AL_M1631 0x1631 +#define PCI_DEVICE_ID_AL_M1632 0x1632 +#define PCI_DEVICE_ID_AL_M1641 0x1641 +#define PCI_DEVICE_ID_AL_M1644 0x1644 +#define PCI_DEVICE_ID_AL_M1647 0x1647 +#define PCI_DEVICE_ID_AL_M1651 0x1651 +#define PCI_DEVICE_ID_AL_M1671 0x1671 +#define PCI_DEVICE_ID_AL_M1681 0x1681 +#define PCI_DEVICE_ID_AL_M1683 0x1683 +#define PCI_DEVICE_ID_AL_M1689 0x1689 +#define PCI_DEVICE_ID_AL_M5219 0x5219 +#define PCI_DEVICE_ID_AL_M5228 0x5228 +#define PCI_DEVICE_ID_AL_M5229 0x5229 +#define PCI_DEVICE_ID_AL_M5451 0x5451 +#define PCI_DEVICE_ID_AL_M7101 0x7101 + +#define PCI_VENDOR_ID_NEOMAGIC 0x10c8 +#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005 +#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006 +#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016 + +#define PCI_VENDOR_ID_TCONRAD 0x10da +#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508 + +#define PCI_VENDOR_ID_NVIDIA 0x10de +#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 +#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028 +#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029 +#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a +#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C +#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E +#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 +#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 +#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE 0x005d +#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 +#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 +#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM 0x0069 +#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a +#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 +#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 +#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM 0x0089 +#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO 0x008a +#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT 0x0090 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX 0x0091 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800 0x0098 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099 +#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0 +#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1 +#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2 +#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8 +#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9 +#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc +#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce +#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 +#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 +#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 +#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM 0x00d9 +#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da +#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 +#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 +#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 +#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 +#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO 0x00ea +#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee +#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0 +#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1 +#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2 +#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3 +#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x00f9 +#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280 0x00fd +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101 +#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112 +#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152 +#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000 0x0185 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B +#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0 +#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4 +#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc +#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM 0x01c1 +#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS 0x0264 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS 0x0368 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289 +#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347 +#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C +#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E +#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0 0x0360 +#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4 0x0364 +#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS 0x03EB +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS 0x0446 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE 0x0448 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS 0x0542 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS 0x0752 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS 0x07D8 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS 0x0AA2 +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA 0x0D85 + +#define PCI_VENDOR_ID_IMS 0x10e0 +#define PCI_DEVICE_ID_IMS_TT128 0x9128 +#define PCI_DEVICE_ID_IMS_TT3D 0x9135 + +#define PCI_VENDOR_ID_INTERG 0x10ea +#define PCI_DEVICE_ID_INTERG_1682 0x1682 +#define PCI_DEVICE_ID_INTERG_2000 0x2000 +#define PCI_DEVICE_ID_INTERG_2010 0x2010 +#define PCI_DEVICE_ID_INTERG_5000 0x5000 +#define PCI_DEVICE_ID_INTERG_5050 0x5050 + +#define PCI_VENDOR_ID_REALTEK 0x10ec +#define PCI_DEVICE_ID_REALTEK_8139 0x8139 + +#define PCI_VENDOR_ID_XILINX 0x10ee +#define PCI_DEVICE_ID_RME_DIGI96 0x3fc0 +#define PCI_DEVICE_ID_RME_DIGI96_8 0x3fc1 +#define PCI_DEVICE_ID_RME_DIGI96_8_PRO 0x3fc2 +#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3 +#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5 +#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6 + +#define PCI_VENDOR_ID_INIT 0x1101 + +#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */ +#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 +#define PCI_DEVICE_ID_CREATIVE_20K1 0x0005 +#define PCI_DEVICE_ID_CREATIVE_20K2 0x000b +#define PCI_SUBDEVICE_ID_CREATIVE_SB0760 0x0024 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08801 0x0041 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08802 0x0042 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08803 0x0043 +#define PCI_SUBDEVICE_ID_CREATIVE_SB1270 0x0062 +#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX 0x6000 + +#define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ +#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 + +#define PCI_VENDOR_ID_TTI 0x1103 +#define PCI_DEVICE_ID_TTI_HPT343 0x0003 +#define PCI_DEVICE_ID_TTI_HPT366 0x0004 +#define PCI_DEVICE_ID_TTI_HPT372 0x0005 +#define PCI_DEVICE_ID_TTI_HPT302 0x0006 +#define PCI_DEVICE_ID_TTI_HPT371 0x0007 +#define PCI_DEVICE_ID_TTI_HPT374 0x0008 +#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 /* apparently a 372N variant? */ + +#define PCI_VENDOR_ID_VIA 0x1106 +#define PCI_DEVICE_ID_VIA_8763_0 0x0198 +#define PCI_DEVICE_ID_VIA_8380_0 0x0204 +#define PCI_DEVICE_ID_VIA_3238_0 0x0238 +#define PCI_DEVICE_ID_VIA_PT880 0x0258 +#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308 +#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 +#define PCI_DEVICE_ID_VIA_3269_0 0x0269 +#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 +#define PCI_DEVICE_ID_VIA_3296_0 0x0296 +#define PCI_DEVICE_ID_VIA_8363_0 0x0305 +#define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 +#define PCI_DEVICE_ID_VIA_P4M890 0x0327 +#define PCI_DEVICE_ID_VIA_VT3324 0x0324 +#define PCI_DEVICE_ID_VIA_VT3336 0x0336 +#define PCI_DEVICE_ID_VIA_VT3351 0x0351 +#define PCI_DEVICE_ID_VIA_VT3364 0x0364 +#define PCI_DEVICE_ID_VIA_8371_0 0x0391 +#define PCI_DEVICE_ID_VIA_6415 0x0415 +#define PCI_DEVICE_ID_VIA_8501_0 0x0501 +#define PCI_DEVICE_ID_VIA_82C561 0x0561 +#define PCI_DEVICE_ID_VIA_82C586_1 0x0571 +#define PCI_DEVICE_ID_VIA_82C576 0x0576 +#define PCI_DEVICE_ID_VIA_82C586_0 0x0586 +#define PCI_DEVICE_ID_VIA_82C596 0x0596 +#define PCI_DEVICE_ID_VIA_82C597_0 0x0597 +#define PCI_DEVICE_ID_VIA_82C598_0 0x0598 +#define PCI_DEVICE_ID_VIA_8601_0 0x0601 +#define PCI_DEVICE_ID_VIA_8605_0 0x0605 +#define PCI_DEVICE_ID_VIA_82C686 0x0686 +#define PCI_DEVICE_ID_VIA_82C691_0 0x0691 +#define PCI_DEVICE_ID_VIA_82C576_1 0x1571 +#define PCI_DEVICE_ID_VIA_82C586_2 0x3038 +#define PCI_DEVICE_ID_VIA_82C586_3 0x3040 +#define PCI_DEVICE_ID_VIA_82C596_3 0x3050 +#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051 +#define PCI_DEVICE_ID_VIA_82C686_4 0x3057 +#define PCI_DEVICE_ID_VIA_82C686_5 0x3058 +#define PCI_DEVICE_ID_VIA_8233_5 0x3059 +#define PCI_DEVICE_ID_VIA_8233_0 0x3074 +#define PCI_DEVICE_ID_VIA_8633_0 0x3091 +#define PCI_DEVICE_ID_VIA_8367_0 0x3099 +#define PCI_DEVICE_ID_VIA_8653_0 0x3101 +#define PCI_DEVICE_ID_VIA_8622 0x3102 +#define PCI_DEVICE_ID_VIA_8235_USB_2 0x3104 +#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 +#define PCI_DEVICE_ID_VIA_8361 0x3112 +#define PCI_DEVICE_ID_VIA_XM266 0x3116 +#define PCI_DEVICE_ID_VIA_612X 0x3119 +#define PCI_DEVICE_ID_VIA_862X_0 0x3123 +#define PCI_DEVICE_ID_VIA_8753_0 0x3128 +#define PCI_DEVICE_ID_VIA_8233A 0x3147 +#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 +#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 +#define PCI_DEVICE_ID_VIA_XN266 0x3156 +#define PCI_DEVICE_ID_VIA_6410 0x3164 +#define PCI_DEVICE_ID_VIA_8754C_0 0x3168 +#define PCI_DEVICE_ID_VIA_8235 0x3177 +#define PCI_DEVICE_ID_VIA_8385_0 0x3188 +#define PCI_DEVICE_ID_VIA_8377_0 0x3189 +#define PCI_DEVICE_ID_VIA_8378_0 0x3205 +#define PCI_DEVICE_ID_VIA_8783_0 0x3208 +#define PCI_DEVICE_ID_VIA_8237 0x3227 +#define PCI_DEVICE_ID_VIA_8251 0x3287 +#define PCI_DEVICE_ID_VIA_8261 0x3402 +#define PCI_DEVICE_ID_VIA_8237A 0x3337 +#define PCI_DEVICE_ID_VIA_8237S 0x3372 +#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 +#define PCI_DEVICE_ID_VIA_8231 0x8231 +#define PCI_DEVICE_ID_VIA_8231_4 0x8235 +#define PCI_DEVICE_ID_VIA_8365_1 0x8305 +#define PCI_DEVICE_ID_VIA_CX700 0x8324 +#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 +#define PCI_DEVICE_ID_VIA_VX800 0x8353 +#define PCI_DEVICE_ID_VIA_VX855 0x8409 +#define PCI_DEVICE_ID_VIA_8371_1 0x8391 +#define PCI_DEVICE_ID_VIA_82C598_1 0x8598 +#define PCI_DEVICE_ID_VIA_838X_1 0xB188 +#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 +#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409 +#define PCI_DEVICE_ID_VIA_ANON 0xFFFF + +#define PCI_VENDOR_ID_SIEMENS 0x110A +#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 + +#define PCI_VENDOR_ID_VORTEX 0x1119 +#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000 +#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001 +#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002 +#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003 +#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004 +#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005 +#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006 +#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007 +#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008 +#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009 +#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a +#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b +#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c +#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d +#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100 +#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101 +#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102 +#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103 +#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104 +#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105 + +#define PCI_VENDOR_ID_EF 0x111a +#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000 +#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002 +#define PCI_DEVICE_ID_EF_ATM_LANAI2 0x0003 +#define PCI_DEVICE_ID_EF_ATM_LANAIHB 0x0005 + +#define PCI_VENDOR_ID_IDT 0x111d +#define PCI_DEVICE_ID_IDT_IDT77201 0x0001 + +#define PCI_VENDOR_ID_FORE 0x1127 +#define PCI_DEVICE_ID_FORE_PCA200E 0x0300 + +#define PCI_VENDOR_ID_PHILIPS 0x1131 +#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146 +#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730 + +#define PCI_VENDOR_ID_EICON 0x1133 +#define PCI_DEVICE_ID_EICON_DIVA20 0xe002 +#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004 +#define PCI_DEVICE_ID_EICON_DIVA201 0xe005 +#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b +#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010 +#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012 +#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013 +#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014 + +#define PCI_VENDOR_ID_CISCO 0x1137 + +#define PCI_VENDOR_ID_ZIATECH 0x1138 +#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550 + + +#define PCI_VENDOR_ID_SYSKONNECT 0x1148 +#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200 +#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300 +#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320 +#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400 +#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500 + +#define PCI_VENDOR_ID_DIGI 0x114f +#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070 +#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 +#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 +#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073 +#define PCI_DEVICE_ID_DIGI_NEO_8 0x00B1 +#define PCI_DEVICE_ID_NEO_2DB9 0x00C8 +#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 +#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA +#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB +#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4 + +#define PCI_VENDOR_ID_XIRCOM 0x115d +#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 +#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103 + +#define PCI_VENDOR_ID_SERVERWORKS 0x1166 +#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 +#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 +#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 +#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB 0x0036 +#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103 +#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132 +#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 +#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 +#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 +#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205 +#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211 +#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212 +#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 +#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214 +#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 +#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227 +#define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408 + +#define PCI_VENDOR_ID_SBE 0x1176 +#define PCI_DEVICE_ID_SBE_WANXL100 0x0301 +#define PCI_DEVICE_ID_SBE_WANXL200 0x0302 +#define PCI_DEVICE_ID_SBE_WANXL400 0x0104 +#define PCI_SUBDEVICE_ID_SBE_T3E3 0x0009 +#define PCI_SUBDEVICE_ID_SBE_2T3E3_P0 0x0901 +#define PCI_SUBDEVICE_ID_SBE_2T3E3_P1 0x0902 + +#define PCI_VENDOR_ID_TOSHIBA 0x1179 +#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0101 +#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0102 +#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3 0x0103 +#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5 0x0105 +#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a +#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f +#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617 + +#define PCI_VENDOR_ID_TOSHIBA_2 0x102f +#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 +#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU 0x0031 +#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939 0x0032 +#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105 +#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 +#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3 + +#define PCI_VENDOR_ID_ATTO 0x117c + +#define PCI_VENDOR_ID_RICOH 0x1180 +#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465 +#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466 +#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475 +#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 +#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 +#define PCI_DEVICE_ID_RICOH_R5C822 0x0822 +#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823 +#define PCI_DEVICE_ID_RICOH_R5C832 0x0832 +#define PCI_DEVICE_ID_RICOH_R5C843 0x0843 + +#define PCI_VENDOR_ID_DLINK 0x1186 +#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00 + +#define PCI_VENDOR_ID_ARTOP 0x1191 +#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005 +#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006 +#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 +#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008 +#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009 +#define PCI_DEVICE_ID_ARTOP_ATP867A 0x000A +#define PCI_DEVICE_ID_ARTOP_ATP867B 0x000B +#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002 +#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010 +#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020 +#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030 +#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040 +#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050 +#define PCI_DEVICE_ID_ARTOP_8060 0x8060 + +#define PCI_VENDOR_ID_ZEITNET 0x1193 +#define PCI_DEVICE_ID_ZEITNET_1221 0x0001 +#define PCI_DEVICE_ID_ZEITNET_1225 0x0002 + +#define PCI_VENDOR_ID_FUJITSU_ME 0x119e +#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001 +#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003 + +#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9 +#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 + +#define PCI_VENDOR_ID_MARVELL 0x11ab +#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 +#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 +#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 +#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 +#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND 0x4100 +#define PCI_DEVICE_ID_MARVELL_88ALP01_SD 0x4101 +#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC 0x4102 + +#define PCI_VENDOR_ID_V3 0x11b0 +#define PCI_DEVICE_ID_V3_V960 0x0001 +#define PCI_DEVICE_ID_V3_V351 0x0002 + +#define PCI_VENDOR_ID_ATT 0x11c1 +#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480 + +#define PCI_VENDOR_ID_SPECIALIX 0x11cb +#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000 +#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000 +#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004 + +#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4 +#define PCI_DEVICE_ID_AD1889JS 0x1889 + +#define PCI_DEVICE_ID_SEGA_BBA 0x1234 + +#define PCI_VENDOR_ID_ZORAN 0x11de +#define PCI_DEVICE_ID_ZORAN_36057 0x6057 +#define PCI_DEVICE_ID_ZORAN_36120 0x6120 + +#define PCI_VENDOR_ID_COMPEX 0x11f6 +#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112 + +#define PCI_VENDOR_ID_PMC_Sierra 0x11f8 + +#define PCI_VENDOR_ID_RP 0x11fe +#define PCI_DEVICE_ID_RP32INTF 0x0001 +#define PCI_DEVICE_ID_RP8INTF 0x0002 +#define PCI_DEVICE_ID_RP16INTF 0x0003 +#define PCI_DEVICE_ID_RP4QUAD 0x0004 +#define PCI_DEVICE_ID_RP8OCTA 0x0005 +#define PCI_DEVICE_ID_RP8J 0x0006 +#define PCI_DEVICE_ID_RP4J 0x0007 +#define PCI_DEVICE_ID_RP8SNI 0x0008 +#define PCI_DEVICE_ID_RP16SNI 0x0009 +#define PCI_DEVICE_ID_RPP4 0x000A +#define PCI_DEVICE_ID_RPP8 0x000B +#define PCI_DEVICE_ID_RP4M 0x000D +#define PCI_DEVICE_ID_RP2_232 0x000E +#define PCI_DEVICE_ID_RP2_422 0x000F +#define PCI_DEVICE_ID_URP32INTF 0x0801 +#define PCI_DEVICE_ID_URP8INTF 0x0802 +#define PCI_DEVICE_ID_URP16INTF 0x0803 +#define PCI_DEVICE_ID_URP8OCTA 0x0805 +#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C +#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D +#define PCI_DEVICE_ID_CRP16INTF 0x0903 + +#define PCI_VENDOR_ID_CYCLADES 0x120e +#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100 +#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101 +#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102 +#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103 +#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104 +#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105 +#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200 +#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201 +#define PCI_DEVICE_ID_PC300_RX_2 0x0300 +#define PCI_DEVICE_ID_PC300_RX_1 0x0301 +#define PCI_DEVICE_ID_PC300_TE_2 0x0310 +#define PCI_DEVICE_ID_PC300_TE_1 0x0311 +#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320 +#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 + +#define PCI_VENDOR_ID_ESSENTIAL 0x120f +#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 + +#define PCI_VENDOR_ID_O2 0x1217 +#define PCI_DEVICE_ID_O2_6729 0x6729 +#define PCI_DEVICE_ID_O2_6730 0x673a +#define PCI_DEVICE_ID_O2_6832 0x6832 +#define PCI_DEVICE_ID_O2_6836 0x6836 +#define PCI_DEVICE_ID_O2_6812 0x6872 +#define PCI_DEVICE_ID_O2_6933 0x6933 +#define PCI_DEVICE_ID_O2_8120 0x8120 +#define PCI_DEVICE_ID_O2_8220 0x8220 +#define PCI_DEVICE_ID_O2_8221 0x8221 +#define PCI_DEVICE_ID_O2_8320 0x8320 +#define PCI_DEVICE_ID_O2_8321 0x8321 + +#define PCI_VENDOR_ID_3DFX 0x121a +#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001 +#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002 +#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003 +#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005 +#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009 + +#define PCI_VENDOR_ID_AVM 0x1244 +#define PCI_DEVICE_ID_AVM_B1 0x0700 +#define PCI_DEVICE_ID_AVM_C4 0x0800 +#define PCI_DEVICE_ID_AVM_A1 0x0a00 +#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00 +#define PCI_DEVICE_ID_AVM_C2 0x1100 +#define PCI_DEVICE_ID_AVM_T1 0x1200 + +#define PCI_VENDOR_ID_STALLION 0x124d + +/* Allied Telesyn */ +#define PCI_VENDOR_ID_AT 0x1259 +#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701 +#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 + +#define PCI_VENDOR_ID_ESS 0x125d +#define PCI_DEVICE_ID_ESS_ESS1968 0x1968 +#define PCI_DEVICE_ID_ESS_ESS1978 0x1978 +#define PCI_DEVICE_ID_ESS_ALLEGRO_1 0x1988 +#define PCI_DEVICE_ID_ESS_ALLEGRO 0x1989 +#define PCI_DEVICE_ID_ESS_CANYON3D_2LE 0x1990 +#define PCI_DEVICE_ID_ESS_CANYON3D_2 0x1992 +#define PCI_DEVICE_ID_ESS_MAESTRO3 0x1998 +#define PCI_DEVICE_ID_ESS_MAESTRO3_1 0x1999 +#define PCI_DEVICE_ID_ESS_MAESTRO3_HW 0x199a +#define PCI_DEVICE_ID_ESS_MAESTRO3_2 0x199b + +#define PCI_VENDOR_ID_SATSAGEM 0x1267 +#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016 + +#define PCI_VENDOR_ID_ENSONIQ 0x1274 +#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880 +#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000 +#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371 + +#define PCI_VENDOR_ID_TRANSMETA 0x1279 +#define PCI_DEVICE_ID_EFFICEON 0x0060 + +#define PCI_VENDOR_ID_ROCKWELL 0x127A + +#define PCI_VENDOR_ID_ITE 0x1283 +#define PCI_DEVICE_ID_ITE_8172 0x8172 +#define PCI_DEVICE_ID_ITE_8211 0x8211 +#define PCI_DEVICE_ID_ITE_8212 0x8212 +#define PCI_DEVICE_ID_ITE_8213 0x8213 +#define PCI_DEVICE_ID_ITE_8152 0x8152 +#define PCI_DEVICE_ID_ITE_8872 0x8872 +#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 + +/* formerly Platform Tech */ +#define PCI_DEVICE_ID_ESS_ESS0100 0x0100 + +#define PCI_VENDOR_ID_ALTEON 0x12ae + +#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ 0x000C +#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM 0x000D +#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI 0x0100 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2 0x0201 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4 0x0202 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232 0x0300 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232 0x0301 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232 0x0302 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1 0x0310 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2 0x0311 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4 0x0312 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2 0x0320 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4 0x0321 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8 0x0322 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485 0x0330 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485 0x0331 +#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485 0x0332 + +#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2 +#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018 + +#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0 +#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031 +#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021 +#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011 +#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041 +#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D +#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001 +#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010 + +#define PCI_VENDOR_ID_AUREAL 0x12eb +#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 +#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 +#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003 + +#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8 +#define PCI_DEVICE_ID_LML_33R10 0x8a02 + +#define PCI_VENDOR_ID_ESDGMBH 0x12fe +#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 + +#define PCI_VENDOR_ID_SIIG 0x131f +#define PCI_SUBVENDOR_ID_SIIG 0x131f +#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 +#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001 +#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002 +#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010 +#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011 +#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012 +#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020 +#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021 +#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030 +#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031 +#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032 +#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034 +#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035 +#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036 +#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050 +#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051 +#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052 +#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000 +#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001 +#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002 +#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020 +#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021 +#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030 +#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031 +#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032 +#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040 +#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041 +#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042 +#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010 +#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011 +#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012 +#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050 +#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051 +#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052 +#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 +#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 +#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 +#define PCI_DEVICE_ID_SIIG_8S_20x_550 0x2080 +#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081 +#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082 +#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530 + +#define PCI_VENDOR_ID_RADISYS 0x1331 + +#define PCI_VENDOR_ID_MICRO_MEMORY 0x1332 +#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN 0x5415 +#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN 0x5425 +#define PCI_DEVICE_ID_MICRO_MEMORY_6155 0x6155 + +#define PCI_VENDOR_ID_DOMEX 0x134a +#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 + +#define PCI_VENDOR_ID_INTASHIELD 0x135a +#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80 +#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0 + +#define PCI_VENDOR_ID_QUATECH 0x135C +#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 +#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 +#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 +#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 +#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278 + +#define PCI_VENDOR_ID_SEALEVEL 0x135e +#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101 +#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201 +#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402 +#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202 +#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401 +#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 +#define PCI_DEVICE_ID_SEALEVEL_7803 0x7803 +#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804 + +#define PCI_VENDOR_ID_HYPERCOPE 0x1365 +#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050 +#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104 +#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106 +#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 +#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 + +#define PCI_VENDOR_ID_DIGIGRAM 0x1369 +#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM 0xc001 +#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM 0xc002 + +#define PCI_VENDOR_ID_KAWASAKI 0x136b +#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 + +#define PCI_VENDOR_ID_CNET 0x1371 +#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e + +#define PCI_VENDOR_ID_LMC 0x1376 +#define PCI_DEVICE_ID_LMC_HSSI 0x0003 +#define PCI_DEVICE_ID_LMC_DS3 0x0004 +#define PCI_DEVICE_ID_LMC_SSI 0x0005 +#define PCI_DEVICE_ID_LMC_T1 0x0006 + +#define PCI_VENDOR_ID_NETGEAR 0x1385 +#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a + +#define PCI_VENDOR_ID_APPLICOM 0x1389 +#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 +#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 +#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 + +#define PCI_VENDOR_ID_MOXA 0x1393 +#define PCI_DEVICE_ID_MOXA_RC7000 0x0001 +#define PCI_DEVICE_ID_MOXA_CP102 0x1020 +#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021 +#define PCI_DEVICE_ID_MOXA_CP102U 0x1022 +#define PCI_DEVICE_ID_MOXA_C104 0x1040 +#define PCI_DEVICE_ID_MOXA_CP104U 0x1041 +#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 +#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043 +#define PCI_DEVICE_ID_MOXA_CT114 0x1140 +#define PCI_DEVICE_ID_MOXA_CP114 0x1141 +#define PCI_DEVICE_ID_MOXA_CP118U 0x1180 +#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181 +#define PCI_DEVICE_ID_MOXA_CP132 0x1320 +#define PCI_DEVICE_ID_MOXA_CP132U 0x1321 +#define PCI_DEVICE_ID_MOXA_CP134U 0x1340 +#define PCI_DEVICE_ID_MOXA_C168 0x1680 +#define PCI_DEVICE_ID_MOXA_CP168U 0x1681 +#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682 +#define PCI_DEVICE_ID_MOXA_CP204J 0x2040 +#define PCI_DEVICE_ID_MOXA_C218 0x2180 +#define PCI_DEVICE_ID_MOXA_C320 0x3200 + +#define PCI_VENDOR_ID_CCD 0x1397 +#define PCI_DEVICE_ID_CCD_HFC4S 0x08B4 +#define PCI_SUBDEVICE_ID_CCD_PMX2S 0x1234 +#define PCI_DEVICE_ID_CCD_HFC8S 0x16B8 +#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 +#define PCI_DEVICE_ID_CCD_HFCE1 0x30B1 +#define PCI_SUBDEVICE_ID_CCD_SPD4S 0x3136 +#define PCI_SUBDEVICE_ID_CCD_SPDE1 0x3137 +#define PCI_DEVICE_ID_CCD_B000 0xb000 +#define PCI_DEVICE_ID_CCD_B006 0xb006 +#define PCI_DEVICE_ID_CCD_B007 0xb007 +#define PCI_DEVICE_ID_CCD_B008 0xb008 +#define PCI_DEVICE_ID_CCD_B009 0xb009 +#define PCI_DEVICE_ID_CCD_B00A 0xb00a +#define PCI_DEVICE_ID_CCD_B00B 0xb00b +#define PCI_DEVICE_ID_CCD_B00C 0xb00c +#define PCI_DEVICE_ID_CCD_B100 0xb100 +#define PCI_SUBDEVICE_ID_CCD_IOB4ST 0xB520 +#define PCI_SUBDEVICE_ID_CCD_IOB8STR 0xB521 +#define PCI_SUBDEVICE_ID_CCD_IOB8ST 0xB522 +#define PCI_SUBDEVICE_ID_CCD_IOB1E1 0xB523 +#define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540 +#define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550 +#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552 +#define PCI_SUBDEVICE_ID_CCD_JHSE1 0xB553 +#define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B +#define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560 +#define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562 +#define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563 +#define PCI_SUBDEVICE_ID_CCD_BNE1D 0xB564 +#define PCI_SUBDEVICE_ID_CCD_BNE1DP 0xB565 +#define PCI_SUBDEVICE_ID_CCD_BN2S 0xB566 +#define PCI_SUBDEVICE_ID_CCD_BN1SM 0xB567 +#define PCI_SUBDEVICE_ID_CCD_BN4SM 0xB568 +#define PCI_SUBDEVICE_ID_CCD_BN2SM 0xB569 +#define PCI_SUBDEVICE_ID_CCD_BNE1M 0xB56A +#define PCI_SUBDEVICE_ID_CCD_BN8SP 0xB56B +#define PCI_SUBDEVICE_ID_CCD_HFC4S 0xB620 +#define PCI_SUBDEVICE_ID_CCD_HFC8S 0xB622 +#define PCI_DEVICE_ID_CCD_B700 0xb700 +#define PCI_DEVICE_ID_CCD_B701 0xb701 +#define PCI_SUBDEVICE_ID_CCD_HFCE1 0xC523 +#define PCI_SUBDEVICE_ID_CCD_OV2S 0xE884 +#define PCI_SUBDEVICE_ID_CCD_OV4S 0xE888 +#define PCI_SUBDEVICE_ID_CCD_OV8S 0xE998 + +#define PCI_VENDOR_ID_EXAR 0x13a8 +#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 +#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 +#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 + +#define PCI_VENDOR_ID_MICROGATE 0x13c0 +#define PCI_DEVICE_ID_MICROGATE_USC 0x0010 +#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 + +#define PCI_VENDOR_ID_3WARE 0x13C1 +#define PCI_DEVICE_ID_3WARE_1000 0x1000 +#define PCI_DEVICE_ID_3WARE_7000 0x1001 +#define PCI_DEVICE_ID_3WARE_9000 0x1002 + +#define PCI_VENDOR_ID_IOMEGA 0x13ca +#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231 + +#define PCI_VENDOR_ID_ABOCOM 0x13D1 +#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1 + +#define PCI_VENDOR_ID_SUNDANCE 0x13f0 + +#define PCI_VENDOR_ID_CMEDIA 0x13f6 +#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100 +#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101 +#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 +#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 + +#define PCI_VENDOR_ID_LAVA 0x1407 +#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ +#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ +#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ +#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ +#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */ +#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */ +#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000 +#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */ +#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */ +#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800 + +#define PCI_VENDOR_ID_TIMEDIA 0x1409 +#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168 + +#define PCI_VENDOR_ID_ICE 0x1412 +#define PCI_DEVICE_ID_ICE_1712 0x1712 +#define PCI_DEVICE_ID_VT1724 0x1724 + +#define PCI_VENDOR_ID_OXSEMI 0x1415 +#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403 +#define PCI_DEVICE_ID_OXSEMI_PCIe840 0xC000 +#define PCI_DEVICE_ID_OXSEMI_PCIe840_G 0xC004 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_0 0xC100 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G 0xC104 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1 0xC110 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G 0xC114 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C +#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 +#define PCI_DEVICE_ID_OXSEMI_C950 0x950B +#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 +#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 +#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521 +#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523 +#define PCI_SUBDEVICE_ID_OXSEMI_C950 0x0001 + +#define PCI_VENDOR_ID_CHELSIO 0x1425 + +#define PCI_VENDOR_ID_SAMSUNG 0x144d + +#define PCI_VENDOR_ID_GIGABYTE 0x1458 + +#define PCI_VENDOR_ID_AMBIT 0x1468 + +#define PCI_VENDOR_ID_MYRICOM 0x14c1 + +#define PCI_VENDOR_ID_TITAN 0x14D2 +#define PCI_DEVICE_ID_TITAN_010L 0x8001 +#define PCI_DEVICE_ID_TITAN_100L 0x8010 +#define PCI_DEVICE_ID_TITAN_110L 0x8011 +#define PCI_DEVICE_ID_TITAN_200L 0x8020 +#define PCI_DEVICE_ID_TITAN_210L 0x8021 +#define PCI_DEVICE_ID_TITAN_400L 0x8040 +#define PCI_DEVICE_ID_TITAN_800L 0x8080 +#define PCI_DEVICE_ID_TITAN_100 0xA001 +#define PCI_DEVICE_ID_TITAN_200 0xA005 +#define PCI_DEVICE_ID_TITAN_400 0xA003 +#define PCI_DEVICE_ID_TITAN_800B 0xA004 + +#define PCI_VENDOR_ID_PANACOM 0x14d4 +#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400 +#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402 + +#define PCI_VENDOR_ID_SIPACKETS 0x14d9 +#define PCI_DEVICE_ID_SP1011 0x0010 + +#define PCI_VENDOR_ID_AFAVLAB 0x14db +#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 +#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 +#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 + +#define PCI_VENDOR_ID_BCM_GVC 0x14a4 +#define PCI_VENDOR_ID_BROADCOM 0x14e4 +#define PCI_DEVICE_ID_TIGON3_5752 0x1600 +#define PCI_DEVICE_ID_TIGON3_5752M 0x1601 +#define PCI_DEVICE_ID_NX2_5709 0x1639 +#define PCI_DEVICE_ID_NX2_5709S 0x163a +#define PCI_DEVICE_ID_TIGON3_5700 0x1644 +#define PCI_DEVICE_ID_TIGON3_5701 0x1645 +#define PCI_DEVICE_ID_TIGON3_5702 0x1646 +#define PCI_DEVICE_ID_TIGON3_5703 0x1647 +#define PCI_DEVICE_ID_TIGON3_5704 0x1648 +#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649 +#define PCI_DEVICE_ID_NX2_5706 0x164a +#define PCI_DEVICE_ID_NX2_5708 0x164c +#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d +#define PCI_DEVICE_ID_NX2_57710 0x164e +#define PCI_DEVICE_ID_NX2_57711 0x164f +#define PCI_DEVICE_ID_NX2_57711E 0x1650 +#define PCI_DEVICE_ID_TIGON3_5705 0x1653 +#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 +#define PCI_DEVICE_ID_TIGON3_5721 0x1659 +#define PCI_DEVICE_ID_TIGON3_5722 0x165a +#define PCI_DEVICE_ID_TIGON3_5723 0x165b +#define PCI_DEVICE_ID_TIGON3_5705M 0x165d +#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e +#define PCI_DEVICE_ID_NX2_57712 0x1662 +#define PCI_DEVICE_ID_NX2_57712E 0x1663 +#define PCI_DEVICE_ID_TIGON3_5714 0x1668 +#define PCI_DEVICE_ID_TIGON3_5714S 0x1669 +#define PCI_DEVICE_ID_TIGON3_5780 0x166a +#define PCI_DEVICE_ID_TIGON3_5780S 0x166b +#define PCI_DEVICE_ID_TIGON3_5705F 0x166e +#define PCI_DEVICE_ID_TIGON3_5754M 0x1672 +#define PCI_DEVICE_ID_TIGON3_5755M 0x1673 +#define PCI_DEVICE_ID_TIGON3_5756 0x1674 +#define PCI_DEVICE_ID_TIGON3_5751 0x1677 +#define PCI_DEVICE_ID_TIGON3_5715 0x1678 +#define PCI_DEVICE_ID_TIGON3_5715S 0x1679 +#define PCI_DEVICE_ID_TIGON3_5754 0x167a +#define PCI_DEVICE_ID_TIGON3_5755 0x167b +#define PCI_DEVICE_ID_TIGON3_5751M 0x167d +#define PCI_DEVICE_ID_TIGON3_5751F 0x167e +#define PCI_DEVICE_ID_TIGON3_5787F 0x167f +#define PCI_DEVICE_ID_TIGON3_5761E 0x1680 +#define PCI_DEVICE_ID_TIGON3_5761 0x1681 +#define PCI_DEVICE_ID_TIGON3_5764 0x1684 +#define PCI_DEVICE_ID_NX2_57800 0x168a +#define PCI_DEVICE_ID_NX2_57840 0x168d +#define PCI_DEVICE_ID_NX2_57810 0x168e +#define PCI_DEVICE_ID_TIGON3_5787M 0x1693 +#define PCI_DEVICE_ID_TIGON3_5782 0x1696 +#define PCI_DEVICE_ID_TIGON3_5784 0x1698 +#define PCI_DEVICE_ID_TIGON3_5786 0x169a +#define PCI_DEVICE_ID_TIGON3_5787 0x169b +#define PCI_DEVICE_ID_TIGON3_5788 0x169c +#define PCI_DEVICE_ID_TIGON3_5789 0x169d +#define PCI_DEVICE_ID_NX2_57800_MF 0x16a5 +#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 +#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 +#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 +#define PCI_DEVICE_ID_NX2_57800_VF 0x16a9 +#define PCI_DEVICE_ID_NX2_5706S 0x16aa +#define PCI_DEVICE_ID_NX2_57840_MF 0x16ab +#define PCI_DEVICE_ID_NX2_5708S 0x16ac +#define PCI_DEVICE_ID_NX2_57840_VF 0x16ad +#define PCI_DEVICE_ID_NX2_57810_MF 0x16ae +#define PCI_DEVICE_ID_NX2_57810_VF 0x16af +#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 +#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 +#define PCI_DEVICE_ID_TIGON3_5781 0x16dd +#define PCI_DEVICE_ID_TIGON3_5753 0x16f7 +#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd +#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe +#define PCI_DEVICE_ID_TIGON3_5901 0x170d +#define PCI_DEVICE_ID_BCM4401B1 0x170c +#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e +#define PCI_DEVICE_ID_TIGON3_5906 0x1712 +#define PCI_DEVICE_ID_TIGON3_5906M 0x1713 +#define PCI_DEVICE_ID_BCM4401 0x4401 +#define PCI_DEVICE_ID_BCM4401B0 0x4402 + +#define PCI_VENDOR_ID_TOPIC 0x151f +#define PCI_DEVICE_ID_TOPIC_TP560 0x0000 + +#define PCI_VENDOR_ID_MAINPINE 0x1522 +#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100 +#define PCI_VENDOR_ID_ENE 0x1524 +#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510 +#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 +#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551 +#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750 +#define PCI_DEVICE_ID_ENE_CB714_SD_2 0x0751 +#define PCI_DEVICE_ID_ENE_1211 0x1211 +#define PCI_DEVICE_ID_ENE_1225 0x1225 +#define PCI_DEVICE_ID_ENE_1410 0x1410 +#define PCI_DEVICE_ID_ENE_710 0x1411 +#define PCI_DEVICE_ID_ENE_712 0x1412 +#define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_DEVICE_ID_ENE_720 0x1421 +#define PCI_DEVICE_ID_ENE_722 0x1422 + +#define PCI_SUBVENDOR_ID_PERLE 0x155f +#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001 +#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010 + +#define PCI_VENDOR_ID_SYBA 0x1592 +#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 +#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783 + +#define PCI_VENDOR_ID_MORETON 0x15aa +#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000 + +#define PCI_VENDOR_ID_ZOLTRIX 0x15b0 +#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0 + +#define PCI_VENDOR_ID_MELLANOX 0x15b3 +#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44 +#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46 +#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278 +#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282 +#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c +#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 + +#define PCI_VENDOR_ID_DFI 0x15bd + +#define PCI_VENDOR_ID_QUICKNET 0x15e2 +#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500 + +/* + * ADDI-DATA GmbH communication cards + */ +#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8 +#define PCI_VENDOR_ID_ADDIDATA 0x15B8 +#define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000 +#define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001 +#define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002 +#define PCI_DEVICE_ID_ADDIDATA_APCI7800 0x818E +#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009 +#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A +#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B +#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3 0x700C +#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D +#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E +#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F +#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013 + +#define PCI_VENDOR_ID_PDC 0x15e9 + +#define PCI_VENDOR_ID_FARSITE 0x1619 +#define PCI_DEVICE_ID_FARSITE_T2P 0x0400 +#define PCI_DEVICE_ID_FARSITE_T4P 0x0440 +#define PCI_DEVICE_ID_FARSITE_T1U 0x0610 +#define PCI_DEVICE_ID_FARSITE_T2U 0x0620 +#define PCI_DEVICE_ID_FARSITE_T4U 0x0640 +#define PCI_DEVICE_ID_FARSITE_TE1 0x1610 +#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612 + +#define PCI_VENDOR_ID_ARIMA 0x161f + +#define PCI_VENDOR_ID_BROCADE 0x1657 +#define PCI_DEVICE_ID_BROCADE_CT 0x0014 +#define PCI_DEVICE_ID_BROCADE_FC_8G1P 0x0017 +#define PCI_DEVICE_ID_BROCADE_CT_FC 0x0021 + +#define PCI_VENDOR_ID_SIBYTE 0x166d +#define PCI_DEVICE_ID_BCM1250_PCI 0x0001 +#define PCI_DEVICE_ID_BCM1250_HT 0x0002 + +#define PCI_VENDOR_ID_ATHEROS 0x168c + +#define PCI_VENDOR_ID_NETCELL 0x169c +#define PCI_DEVICE_ID_REVOLUTION 0x0044 + +#define PCI_VENDOR_ID_CENATEK 0x16CA +#define PCI_DEVICE_ID_CENATEK_IDE 0x0001 + +#define PCI_VENDOR_ID_VITESSE 0x1725 +#define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 + +#define PCI_VENDOR_ID_LINKSYS 0x1737 +#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 + +#define PCI_VENDOR_ID_ALTIMA 0x173b +#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8 +#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9 +#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea +#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb + +#define PCI_VENDOR_ID_BELKIN 0x1799 +#define PCI_DEVICE_ID_BELKIN_F5D7010V7 0x701f + +#define PCI_VENDOR_ID_RDC 0x17f3 +#define PCI_DEVICE_ID_RDC_R6020 0x6020 +#define PCI_DEVICE_ID_RDC_R6030 0x6030 +#define PCI_DEVICE_ID_RDC_R6040 0x6040 +#define PCI_DEVICE_ID_RDC_R6060 0x6060 +#define PCI_DEVICE_ID_RDC_R6061 0x6061 +#define PCI_DEVICE_ID_RDC_D1010 0x1010 + +#define PCI_VENDOR_ID_LENOVO 0x17aa + +#define PCI_VENDOR_ID_ARECA 0x17d3 +#define PCI_DEVICE_ID_ARECA_1110 0x1110 +#define PCI_DEVICE_ID_ARECA_1120 0x1120 +#define PCI_DEVICE_ID_ARECA_1130 0x1130 +#define PCI_DEVICE_ID_ARECA_1160 0x1160 +#define PCI_DEVICE_ID_ARECA_1170 0x1170 +#define PCI_DEVICE_ID_ARECA_1200 0x1200 +#define PCI_DEVICE_ID_ARECA_1201 0x1201 +#define PCI_DEVICE_ID_ARECA_1202 0x1202 +#define PCI_DEVICE_ID_ARECA_1210 0x1210 +#define PCI_DEVICE_ID_ARECA_1220 0x1220 +#define PCI_DEVICE_ID_ARECA_1230 0x1230 +#define PCI_DEVICE_ID_ARECA_1260 0x1260 +#define PCI_DEVICE_ID_ARECA_1270 0x1270 +#define PCI_DEVICE_ID_ARECA_1280 0x1280 +#define PCI_DEVICE_ID_ARECA_1380 0x1380 +#define PCI_DEVICE_ID_ARECA_1381 0x1381 +#define PCI_DEVICE_ID_ARECA_1680 0x1680 +#define PCI_DEVICE_ID_ARECA_1681 0x1681 + +#define PCI_VENDOR_ID_S2IO 0x17d5 +#define PCI_DEVICE_ID_S2IO_WIN 0x5731 +#define PCI_DEVICE_ID_S2IO_UNI 0x5831 +#define PCI_DEVICE_ID_HERC_WIN 0x5732 +#define PCI_DEVICE_ID_HERC_UNI 0x5832 + +#define PCI_VENDOR_ID_SITECOM 0x182d +#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069 + +#define PCI_VENDOR_ID_TOPSPIN 0x1867 + +#define PCI_VENDOR_ID_SILAN 0x1904 + +#define PCI_VENDOR_ID_RENESAS 0x1912 +#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001 +#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002 +#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004 +#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 +#define PCI_DEVICE_ID_RENESAS_SH7786 0x0010 + +#define PCI_VENDOR_ID_SOLARFLARE 0x1924 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710 + +#define PCI_VENDOR_ID_TDI 0x192E +#define PCI_DEVICE_ID_TDI_EHCI 0x0101 + +#define PCI_VENDOR_ID_FREESCALE 0x1957 +#define PCI_DEVICE_ID_MPC8308 0xc006 +#define PCI_DEVICE_ID_MPC8315E 0x00b4 +#define PCI_DEVICE_ID_MPC8315 0x00b5 +#define PCI_DEVICE_ID_MPC8314E 0x00b6 +#define PCI_DEVICE_ID_MPC8314 0x00b7 +#define PCI_DEVICE_ID_MPC8378E 0x00c4 +#define PCI_DEVICE_ID_MPC8378 0x00c5 +#define PCI_DEVICE_ID_MPC8377E 0x00c6 +#define PCI_DEVICE_ID_MPC8377 0x00c7 +#define PCI_DEVICE_ID_MPC8548E 0x0012 +#define PCI_DEVICE_ID_MPC8548 0x0013 +#define PCI_DEVICE_ID_MPC8543E 0x0014 +#define PCI_DEVICE_ID_MPC8543 0x0015 +#define PCI_DEVICE_ID_MPC8547E 0x0018 +#define PCI_DEVICE_ID_MPC8545E 0x0019 +#define PCI_DEVICE_ID_MPC8545 0x001a +#define PCI_DEVICE_ID_MPC8569E 0x0061 +#define PCI_DEVICE_ID_MPC8569 0x0060 +#define PCI_DEVICE_ID_MPC8568E 0x0020 +#define PCI_DEVICE_ID_MPC8568 0x0021 +#define PCI_DEVICE_ID_MPC8567E 0x0022 +#define PCI_DEVICE_ID_MPC8567 0x0023 +#define PCI_DEVICE_ID_MPC8533E 0x0030 +#define PCI_DEVICE_ID_MPC8533 0x0031 +#define PCI_DEVICE_ID_MPC8544E 0x0032 +#define PCI_DEVICE_ID_MPC8544 0x0033 +#define PCI_DEVICE_ID_MPC8572E 0x0040 +#define PCI_DEVICE_ID_MPC8572 0x0041 +#define PCI_DEVICE_ID_MPC8536E 0x0050 +#define PCI_DEVICE_ID_MPC8536 0x0051 +#define PCI_DEVICE_ID_P2020E 0x0070 +#define PCI_DEVICE_ID_P2020 0x0071 +#define PCI_DEVICE_ID_P2010E 0x0078 +#define PCI_DEVICE_ID_P2010 0x0079 +#define PCI_DEVICE_ID_P1020E 0x0100 +#define PCI_DEVICE_ID_P1020 0x0101 +#define PCI_DEVICE_ID_P1021E 0x0102 +#define PCI_DEVICE_ID_P1021 0x0103 +#define PCI_DEVICE_ID_P1011E 0x0108 +#define PCI_DEVICE_ID_P1011 0x0109 +#define PCI_DEVICE_ID_P1022E 0x0110 +#define PCI_DEVICE_ID_P1022 0x0111 +#define PCI_DEVICE_ID_P1013E 0x0118 +#define PCI_DEVICE_ID_P1013 0x0119 +#define PCI_DEVICE_ID_P4080E 0x0400 +#define PCI_DEVICE_ID_P4080 0x0401 +#define PCI_DEVICE_ID_P4040E 0x0408 +#define PCI_DEVICE_ID_P4040 0x0409 +#define PCI_DEVICE_ID_P2040E 0x0410 +#define PCI_DEVICE_ID_P2040 0x0411 +#define PCI_DEVICE_ID_P3041E 0x041E +#define PCI_DEVICE_ID_P3041 0x041F +#define PCI_DEVICE_ID_P5020E 0x0420 +#define PCI_DEVICE_ID_P5020 0x0421 +#define PCI_DEVICE_ID_P5010E 0x0428 +#define PCI_DEVICE_ID_P5010 0x0429 +#define PCI_DEVICE_ID_MPC8641 0x7010 +#define PCI_DEVICE_ID_MPC8641D 0x7011 +#define PCI_DEVICE_ID_MPC8610 0x7018 + +#define PCI_VENDOR_ID_PASEMI 0x1959 + +#define PCI_VENDOR_ID_ATTANSIC 0x1969 +#define PCI_DEVICE_ID_ATTANSIC_L1 0x1048 +#define PCI_DEVICE_ID_ATTANSIC_L2 0x2048 + +#define PCI_VENDOR_ID_JMICRON 0x197B +#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 +#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 +#define PCI_DEVICE_ID_JMICRON_JMB362 0x2362 +#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363 +#define PCI_DEVICE_ID_JMICRON_JMB364 0x2364 +#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 +#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 +#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 +#define PCI_DEVICE_ID_JMICRON_JMB369 0x2369 +#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 +#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382 +#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383 +#define PCI_DEVICE_ID_JMICRON_JMB385_MS 0x2388 +#define PCI_DEVICE_ID_JMICRON_JMB388_SD 0x2391 +#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392 +#define PCI_DEVICE_ID_JMICRON_JMB390_MS 0x2393 + +#define PCI_VENDOR_ID_KORENIX 0x1982 +#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 +#define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff +#define PCI_DEVICE_ID_KORENIX_JETCARDF2 0x1700 +#define PCI_DEVICE_ID_KORENIX_JETCARDF3 0x17ff + +#define PCI_VENDOR_ID_QMI 0x1a32 + +#define PCI_VENDOR_ID_AZWAVE 0x1a3b + +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 + +#define PCI_VENDOR_ID_TEKRAM 0x1de1 +#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 + +#define PCI_VENDOR_ID_TEHUTI 0x1fc9 +#define PCI_DEVICE_ID_TEHUTI_3009 0x3009 +#define PCI_DEVICE_ID_TEHUTI_3010 0x3010 +#define PCI_DEVICE_ID_TEHUTI_3014 0x3014 + +#define PCI_VENDOR_ID_HINT 0x3388 +#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013 + +#define PCI_VENDOR_ID_3DLABS 0x3d3d +#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007 +#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009 + +#define PCI_VENDOR_ID_NETXEN 0x4040 +#define PCI_DEVICE_ID_NX2031_10GXSR 0x0001 +#define PCI_DEVICE_ID_NX2031_10GCX4 0x0002 +#define PCI_DEVICE_ID_NX2031_4GCU 0x0003 +#define PCI_DEVICE_ID_NX2031_IMEZ 0x0004 +#define PCI_DEVICE_ID_NX2031_HMEZ 0x0005 +#define PCI_DEVICE_ID_NX2031_XG_MGMT 0x0024 +#define PCI_DEVICE_ID_NX2031_XG_MGMT2 0x0025 +#define PCI_DEVICE_ID_NX3031 0x0100 + +#define PCI_VENDOR_ID_AKS 0x416c +#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100 + +#define PCI_VENDOR_ID_ACCESSIO 0x494f +#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM 0x22c0 + +#define PCI_VENDOR_ID_S3 0x5333 +#define PCI_DEVICE_ID_S3_TRIO 0x8811 +#define PCI_DEVICE_ID_S3_868 0x8880 +#define PCI_DEVICE_ID_S3_968 0x88f0 +#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 +#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 +#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00 + +#define PCI_VENDOR_ID_DUNORD 0x5544 +#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 + +#define PCI_VENDOR_ID_DCI 0x6666 +#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 +#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002 +#define PCI_DEVICE_ID_DCI_PCCOM2 0x0004 + +#define PCI_VENDOR_ID_INTEL 0x8086 +#define PCI_DEVICE_ID_INTEL_EESSC 0x0008 +#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 +#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 +#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 +#define PCI_DEVICE_ID_INTEL_PXH_1 0x032A +#define PCI_DEVICE_ID_INTEL_PXHV 0x032C +#define PCI_DEVICE_ID_INTEL_80332_0 0x0330 +#define PCI_DEVICE_ID_INTEL_80332_1 0x0332 +#define PCI_DEVICE_ID_INTEL_80333_0 0x0370 +#define PCI_DEVICE_ID_INTEL_80333_1 0x0372 +#define PCI_DEVICE_ID_INTEL_82375 0x0482 +#define PCI_DEVICE_ID_INTEL_82424 0x0483 +#define PCI_DEVICE_ID_INTEL_82378 0x0484 +#define PCI_DEVICE_ID_INTEL_MRST_SD0 0x0807 +#define PCI_DEVICE_ID_INTEL_MRST_SD1 0x0808 +#define PCI_DEVICE_ID_INTEL_MFD_SD 0x0820 +#define PCI_DEVICE_ID_INTEL_MFD_SDIO1 0x0821 +#define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822 +#define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 +#define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 +#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F +#define PCI_DEVICE_ID_INTEL_I960 0x0960 +#define PCI_DEVICE_ID_INTEL_I960RM 0x0962 +#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062 +#define PCI_DEVICE_ID_INTEL_82573E_SOL 0x1085 +#define PCI_DEVICE_ID_INTEL_82573L_SOL 0x108F +#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 +#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 +#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 +#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 +#define PCI_DEVICE_ID_INTEL_7205_0 0x255d +#define PCI_DEVICE_ID_INTEL_82437 0x122d +#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e +#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230 +#define PCI_DEVICE_ID_INTEL_82371MX 0x1234 +#define PCI_DEVICE_ID_INTEL_82441 0x1237 +#define PCI_DEVICE_ID_INTEL_82380FB 0x124b +#define PCI_DEVICE_ID_INTEL_82439 0x1250 +#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 +#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 +#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 +#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f +#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 +#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 +#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 +#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 +#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416 +#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418 +#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420 +#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421 +#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423 +#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425 +#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426 +#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428 +#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440 +#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443 +#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445 +#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448 +#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a +#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b +#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c +#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e +#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450 +#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b +#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 +#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 +#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 +#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 +#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a +#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b +#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c +#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 +#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1 +#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2 +#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3 +#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5 +#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6 +#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9 +#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca +#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb +#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc +#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0 +#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1 +#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3 +#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 +#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 +#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db +#define PCI_DEVICE_ID_INTEL_82801EB_12 0x24dc +#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd +#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 +#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 +#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4 +#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6 +#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab +#define PCI_DEVICE_ID_INTEL_ESB_10 0x25ac +#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500 +#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501 +#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530 +#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531 +#define PCI_DEVICE_ID_INTEL_E7501_MCH 0x254c +#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560 +#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562 +#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570 +#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572 +#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578 +#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580 +#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 +#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 +#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 +#define PCI_DEVICE_ID_INTEL_5000_ERR 0x25F0 +#define PCI_DEVICE_ID_INTEL_5000_FBD0 0x25F5 +#define PCI_DEVICE_ID_INTEL_5000_FBD1 0x25F6 +#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 +#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 +#define PCI_DEVICE_ID_INTEL_3000_HB 0x2778 +#define PCI_DEVICE_ID_INTEL_82945GM_HB 0x27A0 +#define PCI_DEVICE_ID_INTEL_82945GM_IG 0x27A2 +#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 +#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 +#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 +#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a +#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d +#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e +#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f +#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670 +#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698 +#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b +#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e +#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 +#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 +#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 +#define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc +#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd +#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da +#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd +#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de +#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df +#define PCI_DEVICE_ID_INTEL_ICH8_0 0x2810 +#define PCI_DEVICE_ID_INTEL_ICH8_1 0x2811 +#define PCI_DEVICE_ID_INTEL_ICH8_2 0x2812 +#define PCI_DEVICE_ID_INTEL_ICH8_3 0x2814 +#define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815 +#define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e +#define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850 +#define PCI_DEVICE_ID_INTEL_ICH9_0 0x2910 +#define PCI_DEVICE_ID_INTEL_ICH9_1 0x2917 +#define PCI_DEVICE_ID_INTEL_ICH9_2 0x2912 +#define PCI_DEVICE_ID_INTEL_ICH9_3 0x2913 +#define PCI_DEVICE_ID_INTEL_ICH9_4 0x2914 +#define PCI_DEVICE_ID_INTEL_ICH9_5 0x2919 +#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930 +#define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916 +#define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918 +#define PCI_DEVICE_ID_INTEL_I7_MCR 0x2c18 +#define PCI_DEVICE_ID_INTEL_I7_MC_TAD 0x2c19 +#define PCI_DEVICE_ID_INTEL_I7_MC_RAS 0x2c1a +#define PCI_DEVICE_ID_INTEL_I7_MC_TEST 0x2c1c +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL 0x2c20 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR 0x2c21 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK 0x2c22 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC 0x2c23 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL 0x2c28 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR 0x2c29 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK 0x2c2a +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC 0x2c2b +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL 0x2c30 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR 0x2c31 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK 0x2c32 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC 0x2c33 +#define PCI_DEVICE_ID_INTEL_I7_NONCORE 0x2c41 +#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE 0x2c50 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD 0x2c81 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0 0x2c90 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0 0x2c91 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR 0x2c98 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD 0x2c99 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST 0x2c9C +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC 0x2ca3 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC 0x2cab +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2 0x2d98 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2 0x2d99 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2 0x2d9a +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2 0x2d9c +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2 0x2da0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2 0x2da1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2 0x2da2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2 0x2da3 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2 0x2da8 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2 0x2da9 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2 0x2daa +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2 0x2dab +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2 0x2db0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2 0x2db1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2 0x2db2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2 0x2db3 +#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a +#define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b +#define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c +#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e +#define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 +#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 +#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 +#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c +#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e +#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 +#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 +#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 +#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592 +#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595 +#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596 +#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597 +#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598 +#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 +#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a +#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e +#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c +#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f +#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610 +#define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b +#define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c +#define PCI_DEVICE_ID_INTEL_IOAT_JSF0 0x3710 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF1 0x3711 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF2 0x3712 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF3 0x3713 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF4 0x3714 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF5 0x3715 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF6 0x3716 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF7 0x3717 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF8 0x3718 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF9 0x3719 +#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14 +#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16 +#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18 +#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a +#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 +#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f +#define PCI_DEVICE_ID_INTEL_IOAT_SNB0 0x3c20 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB1 0x3c21 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB2 0x3c22 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB3 0x3c23 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB4 0x3c24 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB5 0x3c25 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB6 0x3c26 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e +#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f +#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f +#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 +#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 +#define PCI_DEVICE_ID_INTEL_5100_22 0x65f6 +#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 +#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035 +#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036 +#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff +#define PCI_DEVICE_ID_INTEL_EP80579_0 0x5031 +#define PCI_DEVICE_ID_INTEL_EP80579_1 0x5032 +#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 +#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 +#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 +#define PCI_DEVICE_ID_INTEL_82437VX 0x7030 +#define PCI_DEVICE_ID_INTEL_82439TX 0x7100 +#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110 +#define PCI_DEVICE_ID_INTEL_82371AB 0x7111 +#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112 +#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113 +#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120 +#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121 +#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122 +#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123 +#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124 +#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125 +#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180 +#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181 +#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190 +#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191 +#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192 +#define PCI_DEVICE_ID_INTEL_440MX 0x7195 +#define PCI_DEVICE_ID_INTEL_440MX_6 0x7196 +#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198 +#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199 +#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b +#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0 +#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2 +#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 +#define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119 +#define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a +#define PCI_DEVICE_ID_INTEL_ITC_LPC 0x8186 +#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 +#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 +#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca +#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb +#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea +#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 +#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 +#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 + +#define PCI_VENDOR_ID_SCALEMP 0x8686 +#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010 + +#define PCI_VENDOR_ID_COMPUTONE 0x8e0e +#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291 +#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302 +#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e +#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001 +#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002 +#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003 + +#define PCI_VENDOR_ID_KTI 0x8e2e + +#define PCI_VENDOR_ID_ADAPTEC 0x9004 +#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078 +#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178 +#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860 +#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078 +#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578 +#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038 +#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075 +#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078 +#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178 +#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078 +#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178 +#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278 +#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378 +#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478 +#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895 +#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078 +#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178 +#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278 +#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378 +#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478 +#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578 +#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678 +#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778 +#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878 + +#define PCI_VENDOR_ID_ADAPTEC2 0x9005 +#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010 +#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011 +#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013 +#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f +#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050 +#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051 +#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f +#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080 +#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081 +#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083 +#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f +#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0 +#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1 +#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3 +#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf +#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN 0x0500 +#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503 + +#define PCI_VENDOR_ID_HOLTEK 0x9412 +#define PCI_DEVICE_ID_HOLTEK_6565 0x6565 + +#define PCI_VENDOR_ID_NETMOS 0x9710 +#define PCI_DEVICE_ID_NETMOS_9705 0x9705 +#define PCI_DEVICE_ID_NETMOS_9715 0x9715 +#define PCI_DEVICE_ID_NETMOS_9735 0x9735 +#define PCI_DEVICE_ID_NETMOS_9745 0x9745 +#define PCI_DEVICE_ID_NETMOS_9755 0x9755 +#define PCI_DEVICE_ID_NETMOS_9805 0x9805 +#define PCI_DEVICE_ID_NETMOS_9815 0x9815 +#define PCI_DEVICE_ID_NETMOS_9835 0x9835 +#define PCI_DEVICE_ID_NETMOS_9845 0x9845 +#define PCI_DEVICE_ID_NETMOS_9855 0x9855 +#define PCI_DEVICE_ID_NETMOS_9865 0x9865 +#define PCI_DEVICE_ID_NETMOS_9900 0x9900 +#define PCI_DEVICE_ID_NETMOS_9901 0x9901 +#define PCI_DEVICE_ID_NETMOS_9904 0x9904 +#define PCI_DEVICE_ID_NETMOS_9912 0x9912 +#define PCI_DEVICE_ID_NETMOS_9922 0x9922 + +#define PCI_VENDOR_ID_3COM_2 0xa727 + +#define PCI_VENDOR_ID_DIGIUM 0xd161 +#define PCI_DEVICE_ID_DIGIUM_HFC4S 0xb410 + +#define PCI_SUBVENDOR_ID_EXSYS 0xd84d +#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 +#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 + +#define PCI_VENDOR_ID_TIGERJET 0xe159 +#define PCI_DEVICE_ID_TIGERJET_300 0x0001 +#define PCI_DEVICE_ID_TIGERJET_100 0x0002 + +#define PCI_VENDOR_ID_XILINX_RME 0xea60 +#define PCI_DEVICE_ID_RME_DIGI32 0x9896 +#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897 +#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898 + +#define PCI_VENDOR_ID_XEN 0x5853 +#define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 + +#define PCI_VENDOR_ID_OCZ 0x1b85 diff --git a/include/compat/linux/pm_qos.h b/include/compat/linux/pm_qos.h new file mode 100755 index 0000000..c58c1c1 --- /dev/null +++ b/include/compat/linux/pm_qos.h @@ -0,0 +1,12 @@ +#ifndef _COMPAT_LINUX_PM_QOS_H +#define _COMPAT_LINUX_PM_QOS_H 1 + +#include + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) +#include_next +#else +#include +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)) */ + +#endif /* _COMPAT_LINUX_PM_QOS_H */ diff --git a/include/compat/linux/pm_qos_params.h b/include/compat/linux/pm_qos_params.h new file mode 100755 index 0000000..d0e3ad8 --- /dev/null +++ b/include/compat/linux/pm_qos_params.h @@ -0,0 +1,36 @@ +#include + +#ifndef __COMPAT_LINUX_PM_QOS_PARAMS_H +#define __COMPAT_LINUX_PM_QOS_PARAMS_H + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)) +#include_next +#else +/* interface for the pm_qos_power infrastructure of the linux kernel. + * + * Mark Gross + */ +#include +#include +#include + +#define PM_QOS_RESERVED 0 +#define PM_QOS_CPU_DMA_LATENCY 1 +#define PM_QOS_NETWORK_LATENCY 2 +#define PM_QOS_NETWORK_THROUGHPUT 3 +#define PM_QOS_SYSTEM_BUS_FREQ 4 + +#define PM_QOS_NUM_CLASSES 5 +#define PM_QOS_DEFAULT_VALUE -1 + +int pm_qos_add_requirement(int qos, char *name, s32 value); +int pm_qos_update_requirement(int qos, char *name, s32 new_value); +void pm_qos_remove_requirement(int qos, char *name); + +int pm_qos_requirement(int qos); + +int pm_qos_add_notifier(int qos, struct notifier_block *notifier); +int pm_qos_remove_notifier(int qos, struct notifier_block *notifier); +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)) */ + +#endif diff --git a/include/compat/linux/pm_runtime.h b/include/compat/linux/pm_runtime.h new file mode 100755 index 0000000..eec965b --- /dev/null +++ b/include/compat/linux/pm_runtime.h @@ -0,0 +1,14 @@ +#include + +#ifndef __COMPAT_LINUX_PM_RUNTIME_H +#define __COMPAT_LINUX_PM_RUNTIME_H + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)) +#include_next +#else + +static inline void pm_runtime_enable(struct device *dev) {} + +#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)) */ + +#endif diff --git a/include/compat/linux/printk.h b/include/compat/linux/printk.h new file mode 100755 index 0000000..c0822ac --- /dev/null +++ b/include/compat/linux/printk.h @@ -0,0 +1,12 @@ +#ifndef _COMPAT_LINUX_PRINTK_H +#define _COMPAT_LINUX_PRINTK_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,36)) +#include_next +#else +#include +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)) */ + +#endif /* _COMPAT_LINUX_PRINTK_H */ diff --git a/include/compat/linux/rfkill.h b/include/compat/linux/rfkill.h new file mode 100755 index 0000000..d615ac9 --- /dev/null +++ b/include/compat/linux/rfkill.h @@ -0,0 +1,32 @@ +#ifndef __COMPAT_RFKILL_H +#define __COMPAT_RFKILL_H + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) + +#include_next + +#else + +#include + +#undef CONFIG_RFKILL +#undef CONFIG_RFKILL_INPUT +#undef CONFIG_RFKILL_LEDS + +#ifdef CONFIG_RFKILL_BACKPORT +#define CONFIG_RFKILL 1 +#endif + +#ifdef CONFIG_RFKILL_BACKPORT_INPUT +#define CONFIG_RFKILL_INPUT +#endif + +#ifdef CONFIG_RFKILL_BACKPORT_LEDS +#define CONFIG_RFKILL_LEDS +#endif + +#include + +#endif + +#endif diff --git a/include/compat/linux/rfkill_backport.h b/include/compat/linux/rfkill_backport.h new file mode 100755 index 0000000..c6c6084 --- /dev/null +++ b/include/compat/linux/rfkill_backport.h @@ -0,0 +1,359 @@ +#ifndef __RFKILL_H +#define __RFKILL_H + +/* + * Copyright (C) 2006 - 2007 Ivo van Doorn + * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 + +/** + * enum rfkill_type - type of rfkill switch. + * + * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @RFKILL_TYPE_GPS: switch is on a GPS device. + * @RFKILL_TYPE_FM: switch is on a FM radio device. + * @NUM_RFKILL_TYPES: number of defined rfkill types + */ +enum rfkill_type { + RFKILL_TYPE_ALL = 0, + RFKILL_TYPE_WLAN, + RFKILL_TYPE_BLUETOOTH, + RFKILL_TYPE_UWB, + RFKILL_TYPE_WIMAX, + RFKILL_TYPE_WWAN, + RFKILL_TYPE_GPS, + RFKILL_TYPE_FM, + NUM_RFKILL_TYPES, +}; + +/** + * enum rfkill_operation - operation types + * @RFKILL_OP_ADD: a device was added + * @RFKILL_OP_DEL: a device was removed + * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device + * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + */ +enum rfkill_operation { + RFKILL_OP_ADD = 0, + RFKILL_OP_DEL, + RFKILL_OP_CHANGE, + RFKILL_OP_CHANGE_ALL, +}; + +/** + * struct rfkill_event - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + */ +struct rfkill_event { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft, hard; +} __attribute__((packed)); + +/* + * We are planning to be backward and forward compatible with changes + * to the event struct, by adding new, optional, members at the end. + * When reading an event (whether the kernel from userspace or vice + * versa) we need to accept anything that's at least as large as the + * version 1 event size, but might be able to accept other sizes in + * the future. + * + * One exception is the kernel -- we already have two event sizes in + * that we've made the 'hard' member optional since our only option + * is to ignore it anyway. + */ +#define RFKILL_EVENT_SIZE_V1 8 + +/* ioctl for turning off rfkill-input (if present) */ +#define RFKILL_IOC_MAGIC 'R' +#define RFKILL_IOC_NOINPUT 1 +#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + +#include +#include +#include +#include +#include +#include + +/* this is opaque */ +struct rfkill; + +/** + * struct rfkill_ops - rfkill driver methods + * + * @poll: poll the rfkill block state(s) -- only assign this method + * when you need polling. When called, simply call one of the + * rfkill_set{,_hw,_sw}_state family of functions. If the hw + * is getting unblocked you need to take into account the return + * value of those functions to make sure the software block is + * properly used. + * @query: query the rfkill block state(s) and call exactly one of the + * rfkill_set{,_hw,_sw}_state family of functions. Assign this + * method if input events can cause hardware state changes to make + * the rfkill core query your driver before setting a requested + * block. + * @set_block: turn the transmitter on (blocked == false) or off + * (blocked == true) -- ignore and return 0 when hard blocked. + * This callback must be assigned. + */ +struct rfkill_ops { + void (*poll)(struct rfkill *rfkill, void *data); + void (*query)(struct rfkill *rfkill, void *data); + int (*set_block)(void *data, bool blocked); +}; + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) +/** + * rfkill_alloc - allocate rfkill structure + * @name: name of the struct -- the string is not copied internally + * @parent: device that has rf switch on it + * @type: type of the switch (RFKILL_TYPE_*) + * @ops: rfkill methods + * @ops_data: data passed to each method + * + * This function should be called by the transmitter driver to allocate an + * rfkill structure. Returns %NULL on failure. + */ +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data); + +/** + * rfkill_register - Register a rfkill structure. + * @rfkill: rfkill structure to be registered + * + * This function should be called by the transmitter driver to register + * the rfkill structure. Before calling this function the driver needs + * to be ready to service method calls from rfkill. + * + * If rfkill_init_sw_state() is not called before registration, + * set_block() will be called to initialize the software blocked state + * to a default value. + * + * If the hardware blocked state is not set before registration, + * it is assumed to be unblocked. + */ +int __must_check rfkill_register(struct rfkill *rfkill); + +/** + * rfkill_pause_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_pause_polling(struct rfkill *rfkill); + +/** + * rfkill_resume_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_resume_polling(struct rfkill *rfkill); + + +/** + * rfkill_unregister - Unregister a rfkill structure. + * @rfkill: rfkill structure to be unregistered + * + * This function should be called by the network driver during device + * teardown to destroy rfkill structure. Until it returns, the driver + * needs to be able to service method calls. + */ +void rfkill_unregister(struct rfkill *rfkill); + +/** + * rfkill_destroy - free rfkill structure + * @rfkill: rfkill structure to be destroyed + * + * Destroys the rfkill structure. + */ +void rfkill_destroy(struct rfkill *rfkill); + +/** + * rfkill_set_hw_state - Set the internal rfkill hardware block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current hardware block state to set + * + * rfkill drivers that get events when the hard-blocked state changes + * use this function to notify the rfkill core (and through that also + * userspace) of the current state. They should also use this after + * resume if the state could have changed. + * + * You need not (but may) call this function if poll_state is assigned. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked) so that drivers need not keep track of the soft + * block state -- which they might not be able to. + */ +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_sw_state - Set the internal rfkill software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that get events when the soft-blocked state changes + * (yes, some platforms directly act on input but allow changing again) + * use this function to notify the rfkill core (and through that also + * userspace) of the current state. + * + * Drivers should also call this function after resume if the state has + * been changed by the user. This only makes sense for "persistent" + * devices (see rfkill_init_sw_state()). + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked). + */ +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_init_sw_state - Initialize persistent software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that preserve their software block state over power off + * use this function to notify the rfkill core (and through that also + * userspace) of their initial state. It should only be used before + * registration. + * + * In addition, it marks the device as "persistent", an attribute which + * can be read by userspace. Persistent devices are expected to preserve + * their own state when suspended. + */ +void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_states - Set the internal rfkill block states + * @rfkill: pointer to the rfkill class to modify. + * @sw: the current software block state to set + * @hw: the current hardware block state to set + * + * This function can be called in any context, even from within rfkill + * callbacks. + */ +void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); + +/** + * rfkill_blocked - query rfkill block + * + * @rfkill: rfkill struct to query + */ +bool rfkill_blocked(struct rfkill *rfkill); +#else /* !RFKILL */ +static inline struct rfkill * __must_check +rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + return ERR_PTR(-ENODEV); +} + +static inline int __must_check rfkill_register(struct rfkill *rfkill) +{ + if (rfkill == ERR_PTR(-ENODEV)) + return 0; + return -EINVAL; +} + +static inline void rfkill_pause_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_resume_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_unregister(struct rfkill *rfkill) +{ +} + +static inline void rfkill_destroy(struct rfkill *rfkill) +{ +} + +static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked) +{ +} + +static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) +{ +} + +static inline bool rfkill_blocked(struct rfkill *rfkill) +{ + return false; +} +#endif /* RFKILL || RFKILL_MODULE */ + +#endif /* __KERNEL__ */ + +#endif /* RFKILL_H */ diff --git a/include/compat/linux/semaphore.h b/include/compat/linux/semaphore.h new file mode 100755 index 0000000..78af4db --- /dev/null +++ b/include/compat/linux/semaphore.h @@ -0,0 +1,12 @@ +#ifndef _COMPAT_LINUX_SEMAPHORE_H +#define _COMPAT_LINUX_SEMAPHORE_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) +#include_next +#else +#include +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,25)) */ + +#endif /* _COMPAT_LINUX_SEMAPHORE_H */ diff --git a/include/compat/linux/spi/libertas_spi.h b/include/compat/linux/spi/libertas_spi.h new file mode 100755 index 0000000..1b5d538 --- /dev/null +++ b/include/compat/linux/spi/libertas_spi.h @@ -0,0 +1,29 @@ +/* + * board-specific data for the libertas_spi driver. + * + * Copyright 2008 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#ifndef _LIBERTAS_SPI_H_ +#define _LIBERTAS_SPI_H_ + +struct spi_device; + +struct libertas_spi_platform_data { + /* There are two ways to read data from the WLAN module's SPI + * interface. Setting 0 or 1 here controls which one is used. + * + * Usually you want to set use_dummy_writes = 1. + * However, if that doesn't work or if you are using a slow SPI clock + * speed, you may want to use 0 here. */ + u16 use_dummy_writes; + + /* Board specific setup/teardown */ + int (*setup)(struct spi_device *spi); + int (*teardown)(struct spi_device *spi); +}; +#endif diff --git a/include/compat/linux/ssb/ssb.h b/include/compat/linux/ssb/ssb.h new file mode 100755 index 0000000..061e560 --- /dev/null +++ b/include/compat/linux/ssb/ssb.h @@ -0,0 +1,538 @@ +#ifndef LINUX_SSB_H_ +#define LINUX_SSB_H_ + +#include +#include +#include +#include +#include +#include +#include + +#include + + +struct pcmcia_device; +struct ssb_bus; +struct ssb_driver; + +struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ + u8 et0mac[6]; /* MAC address for Ethernet */ + u8 et1mac[6]; /* MAC address for 802.11a */ + u8 et0phyaddr; /* MII address for enet0 */ + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u16 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ + u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; + u16 pa1lob0; + u16 pa1lob1; + u16 pa1lob2; + u16 pa1hib0; + u16 pa1hib1; + u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ + u8 txpid2g[4]; /* 2GHz TX power index */ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; + u8 bxa2g; /* 2GHz BX arch */ + u8 rssisav5g; /* 5GHz RSSI params */ + u8 rssismc5g; + u8 rssismf5g; + u8 bxa5g; /* 5GHz BX arch */ + u16 cck2gpo; /* CCK power offset */ + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ + u16 boardflags_lo; /* Board flags (bits 0-15) */ + u16 boardflags_hi; /* Board flags (bits 16-31) */ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ + struct { + struct { + s8 a0, a1, a2, a3; + } ghz24; /* 2.4GHz band */ + struct { + s8 a0, a1, a2, a3; + } ghz5; /* 5GHz band */ + } antenna_gain; + + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ +}; + +/* Information about the PCB the circuitry is soldered on. */ +struct ssb_boardinfo { + u16 vendor; + u16 type; + u8 rev; +}; + + +struct ssb_device; +/* Lowlevel read/write operations on the device MMIO. + * Internal, don't use that outside of ssb. */ +struct ssb_bus_ops { + u8 (*read8)(struct ssb_device *dev, u16 offset); + u16 (*read16)(struct ssb_device *dev, u16 offset); + u32 (*read32)(struct ssb_device *dev, u16 offset); + void (*write8)(struct ssb_device *dev, u16 offset, u8 value); + void (*write16)(struct ssb_device *dev, u16 offset, u16 value); + void (*write32)(struct ssb_device *dev, u16 offset, u32 value); +#ifdef CONFIG_SSB_BLOCKIO + void (*block_read)(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif +}; + + +/* Core-ID values. */ +#define SSB_DEV_CHIPCOMMON 0x800 +#define SSB_DEV_ILINE20 0x801 +#define SSB_DEV_SDRAM 0x803 +#define SSB_DEV_PCI 0x804 +#define SSB_DEV_MIPS 0x805 +#define SSB_DEV_ETHERNET 0x806 +#define SSB_DEV_V90 0x807 +#define SSB_DEV_USB11_HOSTDEV 0x808 +#define SSB_DEV_ADSL 0x809 +#define SSB_DEV_ILINE100 0x80A +#define SSB_DEV_IPSEC 0x80B +#define SSB_DEV_PCMCIA 0x80D +#define SSB_DEV_INTERNAL_MEM 0x80E +#define SSB_DEV_MEMC_SDRAM 0x80F +#define SSB_DEV_EXTIF 0x811 +#define SSB_DEV_80211 0x812 +#define SSB_DEV_MIPS_3302 0x816 +#define SSB_DEV_USB11_HOST 0x817 +#define SSB_DEV_USB11_DEV 0x818 +#define SSB_DEV_USB20_HOST 0x819 +#define SSB_DEV_USB20_DEV 0x81A +#define SSB_DEV_SDIO_HOST 0x81B +#define SSB_DEV_ROBOSWITCH 0x81C +#define SSB_DEV_PARA_ATA 0x81D +#define SSB_DEV_SATA_XORDMA 0x81E +#define SSB_DEV_ETHERNET_GBIT 0x81F +#define SSB_DEV_PCIE 0x820 +#define SSB_DEV_MIMO_PHY 0x821 +#define SSB_DEV_SRAM_CTRLR 0x822 +#define SSB_DEV_MINI_MACPHY 0x823 +#define SSB_DEV_ARM_1176 0x824 +#define SSB_DEV_ARM_7TDMI 0x825 + +/* Vendor-ID values */ +#define SSB_VENDOR_BROADCOM 0x4243 + +/* Some kernel subsystems poke with dev->drvdata, so we must use the + * following ugly workaround to get from struct device to struct ssb_device */ +struct __ssb_dev_wrapper { + struct device dev; + struct ssb_device *sdev; +}; + +struct ssb_device { + /* Having a copy of the ops pointer in each dev struct + * is an optimization. */ + const struct ssb_bus_ops *ops; + + struct device *dev, *dma_dev; + + struct ssb_bus *bus; + struct ssb_device_id id; + + u8 core_index; + unsigned int irq; + + /* Internal-only stuff follows. */ + void *drvdata; /* Per-device data */ + void *devtypedata; /* Per-devicetype (eg 802.11) data */ +}; + +/* Go from struct device to struct ssb_device. */ +static inline +struct ssb_device * dev_to_ssb_dev(struct device *dev) +{ + struct __ssb_dev_wrapper *wrap; + wrap = container_of(dev, struct __ssb_dev_wrapper, dev); + return wrap->sdev; +} + +/* Device specific user data */ +static inline +void ssb_set_drvdata(struct ssb_device *dev, void *data) +{ + dev->drvdata = data; +} +static inline +void * ssb_get_drvdata(struct ssb_device *dev) +{ + return dev->drvdata; +} + +/* Devicetype specific user data. This is per device-type (not per device) */ +void ssb_set_devtypedata(struct ssb_device *dev, void *data); +static inline +void * ssb_get_devtypedata(struct ssb_device *dev) +{ + return dev->devtypedata; +} + + +struct ssb_driver { + const char *name; + const struct ssb_device_id *id_table; + + int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); + void (*remove)(struct ssb_device *dev); + int (*suspend)(struct ssb_device *dev, pm_message_t state); + int (*resume)(struct ssb_device *dev); + void (*shutdown)(struct ssb_device *dev); + + struct device_driver drv; +}; +#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + +extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +#define ssb_driver_register(drv) \ + __ssb_driver_register(drv, THIS_MODULE) + +extern void ssb_driver_unregister(struct ssb_driver *drv); + + + + +enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ +}; + +/* board_vendor */ +#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */ +#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ +#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ +/* board_type */ +#define SSB_BOARD_BCM94306MP 0x0418 +#define SSB_BOARD_BCM4309G 0x0421 +#define SSB_BOARD_BCM4306CB 0x0417 +#define SSB_BOARD_BCM4309MP 0x040C +#define SSB_BOARD_MP4318 0x044A +#define SSB_BOARD_BU4306 0x0416 +#define SSB_BOARD_BU4309 0x040A +/* chip_package */ +#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ +#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ +#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ + +#include +#include +#include +#include + +struct ssb_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct ssb_bus_ops *ops; + + /* The core currently mapped into the MMIO window. + * Not valid on all host-buses. So don't use outside of SSB. */ + struct ssb_device *mapped_device; + union { + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ + u8 mapped_pcmcia_seg; + /* Current SSB base address window for SDIO. */ + u32 sdio_sbaddr; + }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; + + /* The host-bus this backplane is running on. */ + enum ssb_bustype bustype; + /* Pointers to the host-bus. Check bustype before using any of these pointers. */ + union { + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ + struct sdio_func *host_sdio; + }; + + /* See enum ssb_quirks */ + unsigned int quirks; + +#ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ + struct mutex sprom_mutex; +#endif + + /* ID information about the Chip. */ + u16 chip_id; + u8 chip_rev; + u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + + /* List of devices (cores) on the backplane. */ + struct ssb_device devices[SSB_MAX_NR_CORES]; + u8 nr_devices; + + /* Software ID number for this bus. */ + unsigned int busnumber; + + /* The ChipCommon device (if available). */ + struct ssb_chipcommon chipco; + /* The PCI-core device (if available). */ + struct ssb_pcicore pcicore; + /* The MIPS-core device (if available). */ + struct ssb_mipscore mipscore; + /* The EXTif-core device (if available). */ + struct ssb_extif extif; + + /* The following structure elements are not available in early + * SSB initialization. Though, they are available for regular + * registered drivers at any stage. So be careful when + * using them in the ssb core code. */ + + /* ID information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* Contents of the SPROM. */ + struct ssb_sprom sprom; + /* If the board has a cardbus slot, this is set to true. */ + bool has_cardbus_slot; + +#ifdef CONFIG_SSB_EMBEDDED + /* Lock for GPIO register access. */ + spinlock_t gpio_lock; +#endif /* EMBEDDED */ + + /* Internal-only stuff follows. Do not touch. */ + struct list_head list; +#ifdef CONFIG_SSB_DEBUG + /* Is the bus already powered up? */ + bool powered_up; + int power_warn_count; +#endif /* DEBUG */ +}; + +enum ssb_quirks { + /* SDIO connected card requires performing a read after writing a 32-bit value */ + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), +}; + +/* The initialization-invariants. */ +struct ssb_init_invariants { + /* Versioning information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* The SPROM information. That's either stored in an + * EEPROM or NVRAM on the board. */ + struct ssb_sprom sprom; + /* If the board has a cardbus slot, this is set to true. */ + bool has_cardbus_slot; +}; +/* Type of function to fetch the invariants. */ +typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, + struct ssb_init_invariants *iv); + +/* Register a SSB system bus. get_invariants() is called after the + * basic system devices are initialized. + * The invariants are usually fetched from some NVRAM. + * Put the invariants into the struct pointed to by iv. */ +extern int ssb_bus_ssbbus_register(struct ssb_bus *bus, + unsigned long baseaddr, + ssb_invariants_func_t get_invariants); +#ifdef CONFIG_SSB_PCIHOST +extern int ssb_bus_pcibus_register(struct ssb_bus *bus, + struct pci_dev *host_pci); +#endif /* CONFIG_SSB_PCIHOST */ +#ifdef CONFIG_SSB_PCMCIAHOST +extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr); +#endif /* CONFIG_SSB_PCMCIAHOST */ +#ifdef CONFIG_SSB_SDIOHOST +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, + struct sdio_func *sdio_func, + unsigned int quirks); +#endif /* CONFIG_SSB_SDIOHOST */ + + +extern void ssb_bus_unregister(struct ssb_bus *bus); + +/* Does the device have an SPROM? */ +extern bool ssb_is_sprom_available(struct ssb_bus *bus); + +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int ssb_arch_register_fallback_sprom( + int (*sprom_callback)(struct ssb_bus *bus, + struct ssb_sprom *out)); + +/* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +extern int ssb_bus_suspend(struct ssb_bus *bus); +/* Resume a SSB bus. + * Call this from the parent bus resume routine. */ +extern int ssb_bus_resume(struct ssb_bus *bus); + +extern u32 ssb_clockspeed(struct ssb_bus *bus); + +/* Is the device enabled in hardware? */ +int ssb_device_is_enabled(struct ssb_device *dev); +/* Enable a device and pass device-specific SSB_TMSLOW flags. + * If no device-specific flags are available, use 0. */ +void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); +/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ +void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); + + +/* Device MMIO register read/write functions. */ +static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read8(dev, offset); +} +static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read16(dev, offset); +} +static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read32(dev, offset); +} +static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) +{ + dev->ops->write8(dev, offset, value); +} +static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + dev->ops->write16(dev, offset, value); +} +static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + dev->ops->write32(dev, offset, value); +} +#ifdef CONFIG_SSB_BLOCKIO +static inline void ssb_block_read(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_read(dev, buffer, count, offset, reg_width); +} + +static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_write(dev, buffer, count, offset, reg_width); +} +#endif /* CONFIG_SSB_BLOCKIO */ + + +/* The SSB DMA API. Use this API for any DMA operation on the device. + * This API basically is a wrapper that calls the correct DMA API for + * the host device type the SSB device is attached to. */ + +/* Translation (routing) bits that need to be ORed to DMA + * addresses before they are given to a device. */ +extern u32 ssb_dma_translation(struct ssb_device *dev); +#define SSB_DMA_TRANSLATION_MASK 0xC0000000 +#define SSB_DMA_TRANSLATION_SHIFT 30 + +static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DEBUG + printk(KERN_ERR "SSB: BUG! Calling DMA API for " + "unsupported bustype %d\n", dev->bus->bustype); +#endif /* DEBUG */ +} + +#ifdef CONFIG_SSB_PCIHOST +/* PCI-host wrapper driver */ +extern int ssb_pcihost_register(struct pci_driver *driver); +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ + pci_unregister_driver(driver); +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ + if (sdev->bus->bustype == SSB_BUSTYPE_PCI) + pci_set_power_state(sdev->bus->host_pci, state); +} +#else +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ +} +#endif /* CONFIG_SSB_PCIHOST */ + + +/* If a driver is shutdown or suspended, call this to signal + * that the bus may be completely powered down. SSB will decide, + * if it's really time to power down the bus, based on if there + * are other devices that want to run. */ +extern int ssb_bus_may_powerdown(struct ssb_bus *bus); +/* Before initializing and enabling a device, call this to power-up the bus. + * If you want to allow use of dynamic-power-control, pass the flag. + * Otherwise static always-on powercontrol will be used. */ +extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + +extern void ssb_commit_settings(struct ssb_bus *bus); + +/* Various helper functions */ +extern u32 ssb_admatch_base(u32 adm); +extern u32 ssb_admatch_size(u32 adm); + +/* PCI device mapping and fixup routines. + * Called from the architecture pcibios init code. + * These are only available on SSB_EMBEDDED configurations. */ +#ifdef CONFIG_SSB_EMBEDDED +int ssb_pcibios_plat_dev_init(struct pci_dev *dev); +int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +#endif /* CONFIG_SSB_EMBEDDED */ + +#endif /* LINUX_SSB_H_ */ diff --git a/include/compat/linux/ssb/ssb_driver_chipcommon.h b/include/compat/linux/ssb/ssb_driver_chipcommon.h new file mode 100755 index 0000000..5a5d21d --- /dev/null +++ b/include/compat/linux/ssb/ssb_driver_chipcommon.h @@ -0,0 +1,665 @@ +#ifndef LINUX_SSB_CHIPCO_H_ +#define LINUX_SSB_CHIPCO_H_ + +/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions + * + * The chipcommon core provides chip identification, SB control, + * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ + +/** ChipCommon core registers. **/ + +#define SSB_CHIPCO_CHIPID 0x0000 +#define SSB_CHIPCO_IDMASK 0x0000FFFF +#define SSB_CHIPCO_REVMASK 0x000F0000 +#define SSB_CHIPCO_REVSHIFT 16 +#define SSB_CHIPCO_PACKMASK 0x00F00000 +#define SSB_CHIPCO_PACKSHIFT 20 +#define SSB_CHIPCO_NRCORESMASK 0x0F000000 +#define SSB_CHIPCO_NRCORESSHIFT 24 +#define SSB_CHIPCO_CAP 0x0004 /* Capabilities */ +#define SSB_CHIPCO_CAP_NRUART 0x00000003 /* # of UARTs */ +#define SSB_CHIPCO_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define SSB_CHIPCO_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define SSB_CHIPCO_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define SSB_CHIPCO_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define SSB_CHIPCO_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define SSB_CHIPCO_CAP_FLASHT 0x00000700 /* Flash Type */ +#define SSB_CHIPCO_FLASHT_NONE 0x00000000 /* No flash */ +#define SSB_CHIPCO_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define SSB_CHIPCO_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define SSB_CHIPCO_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define SSB_CHIPCO_CAP_PLLT 0x00038000 /* PLL Type */ +#define SSB_PLLTYPE_NONE 0x00000000 +#define SSB_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define SSB_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define SSB_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define SSB_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define SSB_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define SSB_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */ +#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */ +#define SSB_CHIPCO_CAP_OTPS_SHIFT 19 +#define SSB_CHIPCO_CAP_OTPS_BASE 5 +#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ +#define SSB_CHIPCO_CORECTL 0x0008 +#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define SSB_CHIPCO_BIST 0x000C +#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */ +#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000 +#define SSB_CHIPCO_OTPS_PROTECT 0x00000007 +#define SSB_CHIPCO_OTPS_HW_PROTECT 0x00000001 +#define SSB_CHIPCO_OTPS_SW_PROTECT 0x00000002 +#define SSB_CHIPCO_OTPS_CID_PROTECT 0x00000004 +#define SSB_CHIPCO_OTPC 0x0014 /* OTP control */ +#define SSB_CHIPCO_OTPC_RECWAIT 0xFF000000 +#define SSB_CHIPCO_OTPC_PROGWAIT 0x00FFFF00 +#define SSB_CHIPCO_OTPC_PRW_SHIFT 8 +#define SSB_CHIPCO_OTPC_MAXFAIL 0x00000038 +#define SSB_CHIPCO_OTPC_VSEL 0x00000006 +#define SSB_CHIPCO_OTPC_SELVL 0x00000001 +#define SSB_CHIPCO_OTPP 0x0018 /* OTP prog */ +#define SSB_CHIPCO_OTPP_COL 0x000000FF +#define SSB_CHIPCO_OTPP_ROW 0x0000FF00 +#define SSB_CHIPCO_OTPP_ROW_SHIFT 8 +#define SSB_CHIPCO_OTPP_READERR 0x10000000 +#define SSB_CHIPCO_OTPP_VALUE 0x20000000 +#define SSB_CHIPCO_OTPP_READ 0x40000000 +#define SSB_CHIPCO_OTPP_START 0x80000000 +#define SSB_CHIPCO_OTPP_BUSY 0x80000000 +#define SSB_CHIPCO_IRQSTAT 0x0020 +#define SSB_CHIPCO_IRQMASK 0x0024 +#define SSB_CHIPCO_IRQ_GPIO 0x00000001 /* gpio intr */ +#define SSB_CHIPCO_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define SSB_CHIPCO_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define SSB_CHIPCO_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define SSB_CHIPCO_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define SSB_CHIPCO_JCMD 0x0030 /* Rev >= 10 only */ +#define SSB_CHIPCO_JCMD_START 0x80000000 +#define SSB_CHIPCO_JCMD_BUSY 0x80000000 +#define SSB_CHIPCO_JCMD_PAUSE 0x40000000 +#define SSB_CHIPCO_JCMD0_ACC_MASK 0x0000F000 +#define SSB_CHIPCO_JCMD0_ACC_IRDR 0x00000000 +#define SSB_CHIPCO_JCMD0_ACC_DR 0x00001000 +#define SSB_CHIPCO_JCMD0_ACC_IR 0x00002000 +#define SSB_CHIPCO_JCMD0_ACC_RESET 0x00003000 +#define SSB_CHIPCO_JCMD0_ACC_IRPDR 0x00004000 +#define SSB_CHIPCO_JCMD0_ACC_PDR 0x00005000 +#define SSB_CHIPCO_JCMD0_IRW_MASK 0x00000F00 +#define SSB_CHIPCO_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define SSB_CHIPCO_JCMD_ACC_IRDR 0x00000000 +#define SSB_CHIPCO_JCMD_ACC_DR 0x00010000 +#define SSB_CHIPCO_JCMD_ACC_IR 0x00020000 +#define SSB_CHIPCO_JCMD_ACC_RESET 0x00030000 +#define SSB_CHIPCO_JCMD_ACC_IRPDR 0x00040000 +#define SSB_CHIPCO_JCMD_ACC_PDR 0x00050000 +#define SSB_CHIPCO_JCMD_IRW_MASK 0x00001F00 +#define SSB_CHIPCO_JCMD_IRW_SHIFT 8 +#define SSB_CHIPCO_JCMD_DRW_MASK 0x0000003F +#define SSB_CHIPCO_JIR 0x0034 /* Rev >= 10 only */ +#define SSB_CHIPCO_JDR 0x0038 /* Rev >= 10 only */ +#define SSB_CHIPCO_JCTL 0x003C /* Rev >= 10 only */ +#define SSB_CHIPCO_JCTL_FORCE_CLK 4 /* Force clock */ +#define SSB_CHIPCO_JCTL_EXT_EN 2 /* Enable external targets */ +#define SSB_CHIPCO_JCTL_EN 1 /* Enable Jtag master */ +#define SSB_CHIPCO_FLASHCTL 0x0040 +#define SSB_CHIPCO_FLASHCTL_START 0x80000000 +#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START +#define SSB_CHIPCO_FLASHADDR 0x0044 +#define SSB_CHIPCO_FLASHDATA 0x0048 +#define SSB_CHIPCO_BCAST_ADDR 0x0050 +#define SSB_CHIPCO_BCAST_DATA 0x0054 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ +#define SSB_CHIPCO_GPIOIN 0x0060 +#define SSB_CHIPCO_GPIOOUT 0x0064 +#define SSB_CHIPCO_GPIOOUTEN 0x0068 +#define SSB_CHIPCO_GPIOCTL 0x006C +#define SSB_CHIPCO_GPIOPOL 0x0070 +#define SSB_CHIPCO_GPIOIRQ 0x0074 +#define SSB_CHIPCO_WATCHDOG 0x0080 +#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF +#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 +#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 +#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 +#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_CLOCK_N 0x0090 +#define SSB_CHIPCO_CLOCK_SB 0x0094 +#define SSB_CHIPCO_CLOCK_PCI 0x0098 +#define SSB_CHIPCO_CLOCK_M2 0x009C +#define SSB_CHIPCO_CLOCK_MIPS 0x00A0 +#define SSB_CHIPCO_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define SSB_CHIPCO_CLKDIV_SFLASH 0x0F000000 +#define SSB_CHIPCO_CLKDIV_SFLASH_SHIFT 24 +#define SSB_CHIPCO_CLKDIV_OTP 0x000F0000 +#define SSB_CHIPCO_CLKDIV_OTP_SHIFT 16 +#define SSB_CHIPCO_CLKDIV_JTAG 0x00000F00 +#define SSB_CHIPCO_CLKDIV_JTAG_SHIFT 8 +#define SSB_CHIPCO_CLKDIV_UART 0x000000FF +#define SSB_CHIPCO_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define SSB_CHIPCO_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define SSB_CHIPCO_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define SSB_CHIPCO_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define SSB_CHIPCO_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define SSB_CHIPCO_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define SSB_CHIPCO_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define SSB_CHIPCO_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define SSB_CHIPCO_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define SSB_CHIPCO_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define SSB_CHIPCO_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define SSB_CHIPCO_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define SSB_CHIPCO_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define SSB_CHIPCO_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define SSB_CHIPCO_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define SSB_CHIPCO_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define SSB_CHIPCO_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT 16 +#define SSB_CHIPCO_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define SSB_CHIPCO_PCMCIA_CFG 0x0100 +#define SSB_CHIPCO_PCMCIA_MEMWAIT 0x0104 +#define SSB_CHIPCO_PCMCIA_ATTRWAIT 0x0108 +#define SSB_CHIPCO_PCMCIA_IOWAIT 0x010C +#define SSB_CHIPCO_IDE_CFG 0x0110 +#define SSB_CHIPCO_IDE_MEMWAIT 0x0114 +#define SSB_CHIPCO_IDE_ATTRWAIT 0x0118 +#define SSB_CHIPCO_IDE_IOWAIT 0x011C +#define SSB_CHIPCO_PROG_CFG 0x0120 +#define SSB_CHIPCO_PROG_WAITCNT 0x0124 +#define SSB_CHIPCO_FLASH_CFG 0x0128 +#define SSB_CHIPCO_FLASH_WAITCNT 0x012C +#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ +#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define SSB_CHIPCO_UART0_DATA 0x0300 +#define SSB_CHIPCO_UART0_IMR 0x0304 +#define SSB_CHIPCO_UART0_FCR 0x0308 +#define SSB_CHIPCO_UART0_LCR 0x030C +#define SSB_CHIPCO_UART0_MCR 0x0310 +#define SSB_CHIPCO_UART0_LSR 0x0314 +#define SSB_CHIPCO_UART0_MSR 0x0318 +#define SSB_CHIPCO_UART0_SCRATCH 0x031C +#define SSB_CHIPCO_UART1_DATA 0x0400 +#define SSB_CHIPCO_UART1_IMR 0x0404 +#define SSB_CHIPCO_UART1_FCR 0x0408 +#define SSB_CHIPCO_UART1_LCR 0x040C +#define SSB_CHIPCO_UART1_MCR 0x0410 +#define SSB_CHIPCO_UART1_LSR 0x0414 +#define SSB_CHIPCO_UART1_MSR 0x0418 +#define SSB_CHIPCO_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 +#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2 +#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */ +#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */ +#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */ +#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */ +#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650 +#define SSB_CHIPCO_CHIPCTL_DATA 0x0654 +#define SSB_CHIPCO_REGCTL_ADDR 0x0658 +#define SSB_CHIPCO_REGCTL_DATA 0x065C +#define SSB_CHIPCO_PLLCTL_ADDR 0x0660 +#define SSB_CHIPCO_PLLCTL_DATA 0x0664 + + + +/** PMU PLL registers */ + +/* PMU rev 0 PLL registers */ +#define SSB_PMU0_PLLCTL0 0 +#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001 +#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */ +#define SSB_PMU0_PLLCTL1 1 +#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */ +#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28 +#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */ +#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8 +#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */ +#define SSB_PMU0_PLLCTL2 2 +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */ +#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0 + +/* PMU rev 1 PLL registers */ +#define SSB_PMU1_PLLCTL0 0 +#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ +#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 +#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ +#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL1 1 +#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ +#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ +#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ +#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 +#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ +#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL2 2 +#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ +#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 +#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ +#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 +#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ +#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 +#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ +#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 +#define SSB_PMU1_PLLCTL3 3 +#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ +#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 +#define SSB_PMU1_PLLCTL4 4 +#define SSB_PMU1_PLLCTL5 5 +#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ +#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 + +/* BCM4312 PLL resource numbers. */ +#define SSB_PMURES_4312_SWITCHER_BURST 0 +#define SSB_PMURES_4312_SWITCHER_PWM 1 +#define SSB_PMURES_4312_PA_REF_LDO 2 +#define SSB_PMURES_4312_CORE_LDO_BURST 3 +#define SSB_PMURES_4312_CORE_LDO_PWM 4 +#define SSB_PMURES_4312_RADIO_LDO 5 +#define SSB_PMURES_4312_ILP_REQUEST 6 +#define SSB_PMURES_4312_BG_FILTBYP 7 +#define SSB_PMURES_4312_TX_FILTBYP 8 +#define SSB_PMURES_4312_RX_FILTBYP 9 +#define SSB_PMURES_4312_XTAL_PU 10 +#define SSB_PMURES_4312_ALP_AVAIL 11 +#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 +#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 +#define SSB_PMURES_4312_HT_AVAIL 14 + +/* BCM4325 PLL resource numbers. */ +#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 +#define SSB_PMURES_4325_CBUCK_BURST 1 +#define SSB_PMURES_4325_CBUCK_PWM 2 +#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 +#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 +#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 +#define SSB_PMURES_4325_ILP_REQUEST 6 +#define SSB_PMURES_4325_ABUCK_BURST 7 +#define SSB_PMURES_4325_ABUCK_PWM 8 +#define SSB_PMURES_4325_LNLDO1_PU 9 +#define SSB_PMURES_4325_LNLDO2_PU 10 +#define SSB_PMURES_4325_LNLDO3_PU 11 +#define SSB_PMURES_4325_LNLDO4_PU 12 +#define SSB_PMURES_4325_XTAL_PU 13 +#define SSB_PMURES_4325_ALP_AVAIL 14 +#define SSB_PMURES_4325_RX_PWRSW_PU 15 +#define SSB_PMURES_4325_TX_PWRSW_PU 16 +#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 +#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 +#define SSB_PMURES_4325_AFE_PWRSW_PU 19 +#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 +#define SSB_PMURES_4325_HT_AVAIL 21 + +/* BCM4328 PLL resource numbers. */ +#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 +#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 +#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_4328_ILP_REQUEST 4 +#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_4328_ROM_SWITCH 7 +#define SSB_PMURES_4328_PA_REF_LDO 8 +#define SSB_PMURES_4328_RADIO_LDO 9 +#define SSB_PMURES_4328_AFE_LDO 10 +#define SSB_PMURES_4328_PLL_LDO 11 +#define SSB_PMURES_4328_BG_FILTBYP 12 +#define SSB_PMURES_4328_TX_FILTBYP 13 +#define SSB_PMURES_4328_RX_FILTBYP 14 +#define SSB_PMURES_4328_XTAL_PU 15 +#define SSB_PMURES_4328_XTAL_EN 16 +#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 +#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 +#define SSB_PMURES_4328_BB_PLL_PU 19 + +/* BCM5354 PLL resource numbers. */ +#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 +#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 +#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 +#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 +#define SSB_PMURES_5354_ILP_REQUEST 4 +#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 +#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 +#define SSB_PMURES_5354_ROM_SWITCH 7 +#define SSB_PMURES_5354_PA_REF_LDO 8 +#define SSB_PMURES_5354_RADIO_LDO 9 +#define SSB_PMURES_5354_AFE_LDO 10 +#define SSB_PMURES_5354_PLL_LDO 11 +#define SSB_PMURES_5354_BG_FILTBYP 12 +#define SSB_PMURES_5354_TX_FILTBYP 13 +#define SSB_PMURES_5354_RX_FILTBYP 14 +#define SSB_PMURES_5354_XTAL_PU 15 +#define SSB_PMURES_5354_XTAL_EN 16 +#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 +#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 +#define SSB_PMURES_5354_BB_PLL_PU 19 + + + +/** Chip specific Chip-Status register contents. */ +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ +#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 +#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ +#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ +#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004 +#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008 +#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0 +#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 +#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + +/** Macros to determine SPROM presence based on Chip-Status register. */ +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL) +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL)) + + + +/** Clockcontrol masks and values **/ + +/* SSB_CHIPCO_CLOCK_N */ +#define SSB_CHIPCO_CLK_N1 0x0000003F /* n1 control */ +#define SSB_CHIPCO_CLK_N2 0x00003F00 /* n2 control */ +#define SSB_CHIPCO_CLK_N2_SHIFT 8 +#define SSB_CHIPCO_CLK_PLLC 0x000F0000 /* pll control */ +#define SSB_CHIPCO_CLK_PLLC_SHIFT 16 + +/* SSB_CHIPCO_CLOCK_SB/PCI/UART */ +#define SSB_CHIPCO_CLK_M1 0x0000003F /* m1 control */ +#define SSB_CHIPCO_CLK_M2 0x00003F00 /* m2 control */ +#define SSB_CHIPCO_CLK_M2_SHIFT 8 +#define SSB_CHIPCO_CLK_M3 0x003F0000 /* m3 control */ +#define SSB_CHIPCO_CLK_M3_SHIFT 16 +#define SSB_CHIPCO_CLK_MC 0x1F000000 /* mux control */ +#define SSB_CHIPCO_CLK_MC_SHIFT 24 + +/* N3M Clock control magic field values */ +#define SSB_CHIPCO_CLK_F6_2 0x02 /* A factor of 2 in */ +#define SSB_CHIPCO_CLK_F6_3 0x03 /* 6-bit fields like */ +#define SSB_CHIPCO_CLK_F6_4 0x05 /* N1, M1 or M3 */ +#define SSB_CHIPCO_CLK_F6_5 0x09 +#define SSB_CHIPCO_CLK_F6_6 0x11 +#define SSB_CHIPCO_CLK_F6_7 0x21 + +#define SSB_CHIPCO_CLK_F5_BIAS 5 /* 5-bit fields get this added */ + +#define SSB_CHIPCO_CLK_MC_BYPASS 0x08 +#define SSB_CHIPCO_CLK_MC_M1 0x04 +#define SSB_CHIPCO_CLK_MC_M1M2 0x02 +#define SSB_CHIPCO_CLK_MC_M1M2M3 0x01 +#define SSB_CHIPCO_CLK_MC_M1M3 0x11 + +/* Type 2 Clock control magic field values */ +#define SSB_CHIPCO_CLK_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ +#define SSB_CHIPCO_CLK_T2M2_BIAS 3 /* m2 bias */ + +#define SSB_CHIPCO_CLK_T2MC_M1BYP 1 +#define SSB_CHIPCO_CLK_T2MC_M2BYP 2 +#define SSB_CHIPCO_CLK_T2MC_M3BYP 4 + +/* Type 6 Clock control magic field values */ +#define SSB_CHIPCO_CLK_T6_MMASK 1 /* bits of interest in m */ +#define SSB_CHIPCO_CLK_T6_M0 120000000 /* sb clock for m = 0 */ +#define SSB_CHIPCO_CLK_T6_M1 100000000 /* sb clock for m = 1 */ +#define SSB_CHIPCO_CLK_SB2MIPS_T6(sb) (2 * (sb)) + +/* Common clock base */ +#define SSB_CHIPCO_CLK_BASE1 24000000 /* Half the clock freq */ +#define SSB_CHIPCO_CLK_BASE2 12500000 /* Alternate crystal on some PLL's */ + +/* Clock control values for 200Mhz in 5350 */ +#define SSB_CHIPCO_CLK_5350_N 0x0311 +#define SSB_CHIPCO_CLK_5350_M 0x04020009 + + +/** Bits in the config registers **/ + +#define SSB_CHIPCO_CFG_EN 0x0001 /* Enable */ +#define SSB_CHIPCO_CFG_EXTM 0x000E /* Extif Mode */ +#define SSB_CHIPCO_CFG_EXTM_ASYNC 0x0002 /* Async/Parallel flash */ +#define SSB_CHIPCO_CFG_EXTM_SYNC 0x0004 /* Synchronous */ +#define SSB_CHIPCO_CFG_EXTM_PCMCIA 0x0008 /* PCMCIA */ +#define SSB_CHIPCO_CFG_EXTM_IDE 0x000A /* IDE */ +#define SSB_CHIPCO_CFG_DS16 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define SSB_CHIPCO_CFG_CLKDIV 0x0060 /* Sync: Clock divisor */ +#define SSB_CHIPCO_CFG_CLKEN 0x0080 /* Sync: Clock enable */ +#define SSB_CHIPCO_CFG_BSTRO 0x0100 /* Sync: Size/Bytestrobe */ + + +/** Flash-specific control/status values */ + +/* flashcontrol opcodes for ST flashes */ +#define SSB_CHIPCO_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define SSB_CHIPCO_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define SSB_CHIPCO_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define SSB_CHIPCO_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define SSB_CHIPCO_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ +#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ +#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ +#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ + +/* Status register bits for ST flashes */ +#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ +#define SSB_CHIPCO_FLASHSTA_ST_WEL 0x02 /* Write Enable Latch */ +#define SSB_CHIPCO_FLASHSTA_ST_BP 0x1C /* Block Protect */ +#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT 2 +#define SSB_CHIPCO_FLASHSTA_ST_SRWD 0x80 /* Status Register Write Disable */ + +/* flashcontrol opcodes for Atmel flashes */ +#define SSB_CHIPCO_FLASHCTL_AT_READ 0x07E8 +#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ 0x07D2 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ /* FIXME */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ /* FIXME */ +#define SSB_CHIPCO_FLASHCTL_AT_STATUS 0x01D7 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM 0x0283 /* Erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM 0x0286 /* Erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM 0x0382 /* Write erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM 0x0385 /* Write erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 + +/* Status register bits for Atmel flashes */ +#define SSB_CHIPCO_FLASHSTA_AT_READY 0x80 +#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH 0x40 +#define SSB_CHIPCO_FLASHSTA_AT_ID 0x38 +#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT 3 + + +/** OTP **/ + +/* OTP regions */ +#define SSB_CHIPCO_OTP_HW_REGION SSB_CHIPCO_OTPS_HW_PROTECT +#define SSB_CHIPCO_OTP_SW_REGION SSB_CHIPCO_OTPS_SW_PROTECT +#define SSB_CHIPCO_OTP_CID_REGION SSB_CHIPCO_OTPS_CID_PROTECT + +/* OTP regions (Byte offsets from otp size) */ +#define SSB_CHIPCO_OTP_SWLIM_OFF (-8) +#define SSB_CHIPCO_OTP_CIDBASE_OFF 0 +#define SSB_CHIPCO_OTP_CIDLIM_OFF 8 + +/* Predefined OTP words (Word offset from otp size) */ +#define SSB_CHIPCO_OTP_BOUNDARY_OFF (-4) +#define SSB_CHIPCO_OTP_HWSIGN_OFF (-3) +#define SSB_CHIPCO_OTP_SWSIGN_OFF (-2) +#define SSB_CHIPCO_OTP_CIDSIGN_OFF (-1) + +#define SSB_CHIPCO_OTP_CID_OFF 0 +#define SSB_CHIPCO_OTP_PKG_OFF 1 +#define SSB_CHIPCO_OTP_FID_OFF 2 +#define SSB_CHIPCO_OTP_RSV_OFF 3 +#define SSB_CHIPCO_OTP_LIM_OFF 4 + +#define SSB_CHIPCO_OTP_SIGNATURE 0x578A +#define SSB_CHIPCO_OTP_MAGIC 0x4E56 + + +struct ssb_device; +struct ssb_serial_port; + +/* Data for the PMU, if available. + * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU) + */ +struct ssb_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; + u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +}; + +static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) +{ + return (cc->dev != NULL); +} + +/* Register access */ +#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset) +#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val) + +#define chipco_mask32(cc, offset, mask) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask)) +#define chipco_set32(cc, offset, set) \ + chipco_write32(cc, offset, chipco_read32(cc, offset) | (set)) +#define chipco_maskset32(cc, offset, mask, set) \ + chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set)) + +extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); + +extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); +extern void ssb_chipco_resume(struct ssb_chipcommon *cc); + +extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m); +extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m); +extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc, + unsigned long ns_per_cycle); + +enum ssb_clkmode { + SSB_CLKMODE_SLOW, + SSB_CLKMODE_FAST, + SSB_CLKMODE_DYNAMIC, +}; + +extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, + enum ssb_clkmode mode); + +extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, + u32 ticks); + +void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); + +u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask); +u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); + +#ifdef CONFIG_SSB_SERIAL +extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, + struct ssb_serial_port *ports); +#endif /* CONFIG_SSB_SERIAL */ + +/* PMU support */ +extern void ssb_pmu_init(struct ssb_chipcommon *cc); + +enum ssb_pmu_ldo_volt_id { + LDO_PAREF = 0, + LDO_VOLT1, + LDO_VOLT2, + LDO_VOLT3, +}; + +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, + enum ssb_pmu_ldo_volt_id id, u32 voltage); +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); + +#endif /* LINUX_SSB_CHIPCO_H_ */ diff --git a/include/compat/linux/ssb/ssb_driver_extif.h b/include/compat/linux/ssb/ssb_driver_extif.h new file mode 100755 index 0000000..91161f0 --- /dev/null +++ b/include/compat/linux/ssb/ssb_driver_extif.h @@ -0,0 +1,214 @@ +/* + * Hardware-specific External Interface I/O core definitions + * for the BCM47xx family of SiliconBackplane-based chips. + * + * The External Interface core supports a total of three external chip selects + * supporting external interfaces. One of the external chip selects is + * used for Flash, one is used for PCMCIA, and the other may be + * programmed to support either a synchronous interface or an + * asynchronous interface. The asynchronous interface can be used to + * support external devices such as UARTs and the BCM2019 Bluetooth + * baseband processor. + * The external interface core also contains 2 on-chip 16550 UARTs, clock + * frequency control, a watchdog interrupt timer, and a GPIO interface. + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ +#ifndef LINUX_SSB_EXTIFCORE_H_ +#define LINUX_SSB_EXTIFCORE_H_ + +/* external interface address space */ +#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x) +#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) +#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) +#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000) +#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + +#define SSB_EXTIF_NR_GPIOOUT 5 +/* GPIO NOTE: + * The multiple instances of output and output enable registers + * are present to allow driver software for multiple cores to control + * gpio outputs without needing to share a single register pair. + * Use the following helper macro to get a register offset value. + */ +#define SSB_EXTIF_GPIO_OUT(index) ({ \ + BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \ + SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \ + }) +#define SSB_EXTIF_GPIO_OUTEN(index) ({ \ + BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \ + SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \ + }) + +/** EXTIF core registers **/ + +#define SSB_EXTIF_CTL 0x0000 +#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */ +#define SSB_EXTIF_EXTSTAT 0x0004 +#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */ +#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */ +#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */ +#define SSB_EXTIF_PCMCIA_CFG 0x0010 +#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014 +#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018 +#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C +#define SSB_EXTIF_PROG_CFG 0x0020 +#define SSB_EXTIF_PROG_WAITCNT 0x0024 +#define SSB_EXTIF_FLASH_CFG 0x0028 +#define SSB_EXTIF_FLASH_WAITCNT 0x002C +#define SSB_EXTIF_WATCHDOG 0x0040 +#define SSB_EXTIF_CLOCK_N 0x0044 +#define SSB_EXTIF_CLOCK_SB 0x0048 +#define SSB_EXTIF_CLOCK_PCI 0x004C +#define SSB_EXTIF_CLOCK_MII 0x0050 +#define SSB_EXTIF_GPIO_IN 0x0060 +#define SSB_EXTIF_GPIO_OUT_BASE 0x0064 +#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068 +#define SSB_EXTIF_EJTAG_OUTEN 0x0090 +#define SSB_EXTIF_GPIO_INTPOL 0x0094 +#define SSB_EXTIF_GPIO_INTMASK 0x0098 +#define SSB_EXTIF_UART_DATA 0x0300 +#define SSB_EXTIF_UART_TIMER 0x0310 +#define SSB_EXTIF_UART_FCR 0x0320 +#define SSB_EXTIF_UART_LCR 0x0330 +#define SSB_EXTIF_UART_MCR 0x0340 +#define SSB_EXTIF_UART_LSR 0x0350 +#define SSB_EXTIF_UART_MSR 0x0360 +#define SSB_EXTIF_UART_SCRATCH 0x0370 + + + + +/* pcmcia/prog/flash_config */ +#define SSB_EXTCFG_EN (1 << 0) /* enable */ +#define SSB_EXTCFG_MODE 0xE /* mode */ +#define SSB_EXTCFG_MODE_SHIFT 1 +#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */ +#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */ +#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */ +#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */ +#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */ +#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */ +#define SSB_EXTCFG_CLKDIV_SHIFT 6 +#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */ +#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */ +#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */ +#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */ +#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */ + +/* pcmcia_memwait */ +#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_MEMW_1_SHIFT 8 +#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_MEMW_2_SHIFT 16 +#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_MEMW_3_SHIFT 24 + +/* pcmcia_attrwait */ +#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_ATTW_1_SHIFT 8 +#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_ATTW_2_SHIFT 16 +#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_ATTW_3_SHIFT 24 + +/* pcmcia_iowait */ +#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_IOW_1_SHIFT 8 +#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_IOW_2_SHIFT 16 +#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_IOW_3_SHIFT 24 + +/* prog_waitcount */ +#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */ +#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */ +#define SSB_PROG_WCNT_1_SHIFT 8 +#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */ +#define SSB_PROG_WCNT_2_SHIFT 16 +#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */ +#define SSB_PROG_WCNT_3_SHIFT 24 + +#define SSB_PROG_W0 0x0000000C +#define SSB_PROG_W1 0x00000A00 +#define SSB_PROG_W2 0x00020000 +#define SSB_PROG_W3 0x01000000 + +/* flash_waitcount */ +#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */ +#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */ +#define SSB_FLASH_WCNT_1_SHIFT 8 +#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */ +#define SSB_FLASH_WCNT_2_SHIFT 16 +#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */ +#define SSB_FLASH_WCNT_3_SHIFT 24 + +/* watchdog */ +#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ + + + +#ifdef CONFIG_SSB_DRIVER_EXTIF + +struct ssb_extif { + struct ssb_device *dev; +}; + +static inline bool ssb_extif_available(struct ssb_extif *extif) +{ + return (extif->dev != NULL); +} + +extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *plltype, u32 *n, u32 *m); + +extern void ssb_extif_timing_init(struct ssb_extif *extif, + unsigned long ns); + +extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, + u32 ticks); + +/* Extif GPIO pin access */ +u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); +u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value); +u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value); +u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value); +u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value); + +#ifdef CONFIG_SSB_SERIAL +extern int ssb_extif_serial_init(struct ssb_extif *extif, + struct ssb_serial_port *ports); +#endif /* CONFIG_SSB_SERIAL */ + + +#else /* CONFIG_SSB_DRIVER_EXTIF */ +/* extif disabled */ + +struct ssb_extif { +}; + +static inline bool ssb_extif_available(struct ssb_extif *extif) +{ + return 0; +} + +static inline +void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *plltype, u32 *n, u32 *m) +{ +} + +static inline +void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, + u32 ticks) +{ +} + +#endif /* CONFIG_SSB_DRIVER_EXTIF */ +#endif /* LINUX_SSB_EXTIFCORE_H_ */ diff --git a/include/compat/linux/ssb/ssb_driver_gige.h b/include/compat/linux/ssb/ssb_driver_gige.h new file mode 100755 index 0000000..eba52a1 --- /dev/null +++ b/include/compat/linux/ssb/ssb_driver_gige.h @@ -0,0 +1,179 @@ +#ifndef LINUX_SSB_DRIVER_GIGE_H_ +#define LINUX_SSB_DRIVER_GIGE_H_ + +#include +#include +#include + + +#ifdef CONFIG_SSB_DRIVER_GIGE + + +#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ +#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ +#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ +#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ +#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ +#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ +#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ +#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ +#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ + +/* TM Status High flags */ +#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ +/* TM Status Low flags */ +#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */ + +/* Boardflags (low) */ +#define SSB_GIGE_BFL_ROBOSWITCH 0x0010 + + +#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory" +#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O" + +struct ssb_gige { + struct ssb_device *dev; + + spinlock_t lock; + + /* True, if the device has an RGMII bus. + * False, if the device has a GMII bus. */ + bool has_rgmii; + + /* The PCI controller device. */ + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; + +/* Check whether a PCI device is a SSB Gigabit Ethernet core. */ +extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev); + +/* Convert a pci_dev pointer to a ssb_gige pointer. */ +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + if (!pdev_is_ssb_gige_core(pdev)) + return NULL; + return container_of(pdev->bus->ops, struct ssb_gige, pci_ops); +} + +/* Returns whether the PHY is connected by an RGMII bus. */ +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + return (dev ? dev->has_rgmii : 0); +} + +/* Returns whether we have a Roboswitch. */ +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return !!(dev->dev->bus->sprom.boardflags_lo & + SSB_GIGE_BFL_ROBOSWITCH); + return 0; +} + +/* Returns whether we can only do one DMA at once. */ +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return ((dev->dev->bus->chip_id == 0x4785) && + (dev->dev->bus->chip_rev < 2)); + return 0; +} + +/* Returns whether we must flush posted writes. */ +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return (dev->dev->bus->chip_id == 0x4785); + return 0; +} + +#ifdef CONFIG_BCM47XX +#include +/* Get the device MAC address */ +static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ + char buf[20]; + if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) + return; + nvram_parse_macaddr(buf, macaddr); +} +#else +static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ +} +#endif + +extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +extern int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev); + +/* The GigE driver is not a standalone module, because we don't have support + * for unregistering the driver. So we could not unload the module anyway. */ +extern int ssb_gige_init(void); +static inline void ssb_gige_exit(void) +{ + /* Currently we can not unregister the GigE driver, + * because we can not unregister the PCI bridge. */ + BUG(); +} + + +#else /* CONFIG_SSB_DRIVER_GIGE */ +/* Gigabit Ethernet driver disabled */ + + +static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_init(void) +{ + return 0; +} +static inline void ssb_gige_exit(void) +{ +} + +static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev) +{ + return 0; +} +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + return NULL; +} +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + return 0; +} + +#endif /* CONFIG_SSB_DRIVER_GIGE */ +#endif /* LINUX_SSB_DRIVER_GIGE_H_ */ diff --git a/include/compat/linux/ssb/ssb_driver_mips.h b/include/compat/linux/ssb/ssb_driver_mips.h new file mode 100755 index 0000000..5f44e97 --- /dev/null +++ b/include/compat/linux/ssb/ssb_driver_mips.h @@ -0,0 +1,46 @@ +#ifndef LINUX_SSB_MIPSCORE_H_ +#define LINUX_SSB_MIPSCORE_H_ + +#ifdef CONFIG_SSB_DRIVER_MIPS + +struct ssb_device; + +struct ssb_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; + + +struct ssb_mipscore { + struct ssb_device *dev; + + int nr_serial_ports; + struct ssb_serial_port serial_ports[4]; + + u8 flash_buswidth; + u32 flash_window; + u32 flash_window_size; +}; + +extern void ssb_mipscore_init(struct ssb_mipscore *mcore); +extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore); + +extern unsigned int ssb_mips_irq(struct ssb_device *dev); + + +#else /* CONFIG_SSB_DRIVER_MIPS */ + +struct ssb_mipscore { +}; + +static inline +void ssb_mipscore_init(struct ssb_mipscore *mcore) +{ +} + +#endif /* CONFIG_SSB_DRIVER_MIPS */ + +#endif /* LINUX_SSB_MIPSCORE_H_ */ diff --git a/include/compat/linux/ssb/ssb_driver_pci.h b/include/compat/linux/ssb/ssb_driver_pci.h new file mode 100755 index 0000000..41e330e --- /dev/null +++ b/include/compat/linux/ssb/ssb_driver_pci.h @@ -0,0 +1,130 @@ +#ifndef LINUX_SSB_PCICORE_H_ +#define LINUX_SSB_PCICORE_H_ + +#include + +struct pci_dev; + + +#ifdef CONFIG_SSB_DRIVER_PCICORE + +/* PCI core registers. */ +#define SSB_PCICORE_CTL 0x0000 /* PCI Control */ +#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */ +#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */ +#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */ +#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */ +#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF +#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */ +#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000 +#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000 +#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000 +#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ + +/* SBtoPCIx */ +#define SSB_PCICORE_SBTOPCI_MEM 0x00000000 +#define SSB_PCICORE_SBTOPCI_IO 0x00000001 +#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002 +#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003 +#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + + +/* PCIcore specific boardflags */ +#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + + +struct ssb_pcicore { + struct ssb_device *dev; + u8 setup_done:1; + u8 hostmode:1; + u8 cardbusmode:1; +}; + +extern void ssb_pcicore_init(struct ssb_pcicore *pc); + +/* Enable IRQ routing for a specific device */ +extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev); + +int ssb_pcicore_plat_dev_init(struct pci_dev *d); +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + + +#else /* CONFIG_SSB_DRIVER_PCICORE */ + + +struct ssb_pcicore { +}; + +static inline +void ssb_pcicore_init(struct ssb_pcicore *pc) +{ +} + +static inline +int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev) +{ + return 0; +} + +static inline +int ssb_pcicore_plat_dev_init(struct pci_dev *d) +{ + return -ENODEV; +} +static inline +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return -ENODEV; +} + +#endif /* CONFIG_SSB_DRIVER_PCICORE */ +#endif /* LINUX_SSB_PCICORE_H_ */ diff --git a/include/compat/linux/ssb/ssb_embedded.h b/include/compat/linux/ssb/ssb_embedded.h new file mode 100755 index 0000000..8d8dedf --- /dev/null +++ b/include/compat/linux/ssb/ssb_embedded.h @@ -0,0 +1,18 @@ +#ifndef LINUX_SSB_EMBEDDED_H_ +#define LINUX_SSB_EMBEDDED_H_ + +#include +#include + + +extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks); + +/* Generic GPIO API */ +u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask); +u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value); +u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value); +u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value); +u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value); +u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value); + +#endif /* LINUX_SSB_EMBEDDED_H_ */ diff --git a/include/compat/linux/ssb/ssb_regs.h b/include/compat/linux/ssb/ssb_regs.h new file mode 100755 index 0000000..d4b0cdf --- /dev/null +++ b/include/compat/linux/ssb/ssb_regs.h @@ -0,0 +1,543 @@ +#ifndef LINUX_SSB_REGS_H_ +#define LINUX_SSB_REGS_H_ + + +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define SSB_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define SSB_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define SSB_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */ +#define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */ + +#define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */ +#define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */ + +#define SSB_EXTIF_BASE 0x1f000000U /* External Interface region base address */ +#define SSB_FLASH1 0x1fc00000U /* Flash Region 1 */ +#define SSB_FLASH1_SZ 0x00400000U /* Size of Flash Region 1 */ + +#define SSB_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define SSB_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define SSB_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ +#define SSB_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ +#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000) +#define SSB_LED (SSB_EXTIF_BASE + 0x00900000) + + +/* Enumeration space constants */ +#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ +#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE) + + +/* mips address */ +#define SSB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + + +/* SSB PCI config space registers. */ +#define SSB_PMCSR 0x44 +#define SSB_PE 0x100 +#define SSB_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define SSB_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define SSB_SPROMCTL 0x88 /* SPROM control */ +#define SSB_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define SSB_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define SSB_PCI_IRQS 0x90 /* PCI interrupts */ +#define SSB_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define SSB_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define SSB_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define SSB_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define SSB_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define SSB_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define SSB_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define SSB_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define SSB_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + + +#define SSB_BAR0_MAX_RETRIES 50 + +/* Silicon backplane configuration register definitions */ +#define SSB_IPSFLAG 0x0F08 +#define SSB_IPSFLAG_IRQ1 0x0000003F /* which sbflags get routed to mips interrupt 1 */ +#define SSB_IPSFLAG_IRQ1_SHIFT 0 +#define SSB_IPSFLAG_IRQ2 0x00003F00 /* which sbflags get routed to mips interrupt 2 */ +#define SSB_IPSFLAG_IRQ2_SHIFT 8 +#define SSB_IPSFLAG_IRQ3 0x003F0000 /* which sbflags get routed to mips interrupt 3 */ +#define SSB_IPSFLAG_IRQ3_SHIFT 16 +#define SSB_IPSFLAG_IRQ4 0x3F000000 /* which sbflags get routed to mips interrupt 4 */ +#define SSB_IPSFLAG_IRQ4_SHIFT 24 +#define SSB_TPSFLAG 0x0F18 +#define SSB_TPSFLAG_BPFLAG 0x0000003F /* Backplane flag # */ +#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040 /* IRQ is always sent on the Backplane */ +#define SSB_TMERRLOGA 0x0F48 +#define SSB_TMERRLOG 0x0F50 +#define SSB_ADMATCH3 0x0F60 +#define SSB_ADMATCH2 0x0F68 +#define SSB_ADMATCH1 0x0F70 +#define SSB_IMSTATE 0x0F90 /* SB Initiator Agent State */ +#define SSB_IMSTATE_PC 0x0000000f /* Pipe Count */ +#define SSB_IMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ +#define SSB_IMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ +#define SSB_IMSTATE_AP_TS 0x00000010 /* Use timeslices only */ +#define SSB_IMSTATE_AP_TK 0x00000020 /* Use token only */ +#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */ +#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */ +#define SSB_IMSTATE_TO 0x00040000 /* Timeout */ +#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */ +#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */ +#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ +#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ +#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +#define SSB_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ +#define SSB_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ +#define SSB_INTVEC_USB 0x00000010 /* Enable interrupts for usb */ +#define SSB_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ +#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ +#define SSB_TMSLOW 0x0F98 /* SB Target State Low */ +#define SSB_TMSLOW_RESET 0x00000001 /* Reset */ +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ +#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ +#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ +#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */ +#define SSB_TMSLOW_BE 0x80000000 /* BIST Enable */ +#define SSB_TMSHIGH 0x0F9C /* SB Target State High */ +#define SSB_TMSHIGH_SERR 0x00000001 /* S-error */ +#define SSB_TMSHIGH_INT 0x00000002 /* Interrupt */ +#define SSB_TMSHIGH_BUSY 0x00000004 /* Busy */ +#define SSB_TMSHIGH_TO 0x00000020 /* Timeout. Backplane rev >= 2.3 only */ +#define SSB_TMSHIGH_COREFL 0x1FFF0000 /* Core specific flags */ +#define SSB_TMSHIGH_COREFL_SHIFT 16 +#define SSB_TMSHIGH_DMA64 0x10000000 /* 64bit DMA supported */ +#define SSB_TMSHIGH_GCR 0x20000000 /* Gated Clock Request */ +#define SSB_TMSHIGH_BISTF 0x40000000 /* BIST Failed */ +#define SSB_TMSHIGH_BISTD 0x80000000 /* BIST Done */ +#define SSB_BWA0 0x0FA0 +#define SSB_IMCFGLO 0x0FA8 +#define SSB_IMCFGLO_SERTO 0x00000007 /* Service timeout */ +#define SSB_IMCFGLO_REQTO 0x00000070 /* Request timeout */ +#define SSB_IMCFGLO_REQTO_SHIFT 4 +#define SSB_IMCFGLO_CONNID 0x00FF0000 /* Connection ID */ +#define SSB_IMCFGLO_CONNID_SHIFT 16 +#define SSB_IMCFGHI 0x0FAC +#define SSB_ADMATCH0 0x0FB0 +#define SSB_TMCFGLO 0x0FB8 +#define SSB_TMCFGHI 0x0FBC +#define SSB_BCONFIG 0x0FC0 +#define SSB_BSTATE 0x0FC8 +#define SSB_ACTCFG 0x0FD8 +#define SSB_FLAGST 0x0FE8 +#define SSB_IDLOW 0x0FF8 +#define SSB_IDLOW_CFGSP 0x00000003 /* Config Space */ +#define SSB_IDLOW_ADDRNGE 0x00000038 /* Address Ranges supported */ +#define SSB_IDLOW_ADDRNGE_SHIFT 3 +#define SSB_IDLOW_SYNC 0x00000040 +#define SSB_IDLOW_INITIATOR 0x00000080 +#define SSB_IDLOW_MIBL 0x00000F00 /* Minimum Backplane latency */ +#define SSB_IDLOW_MIBL_SHIFT 8 +#define SSB_IDLOW_MABL 0x0000F000 /* Maximum Backplane latency */ +#define SSB_IDLOW_MABL_SHIFT 12 +#define SSB_IDLOW_TIF 0x00010000 /* This Initiator is first */ +#define SSB_IDLOW_CCW 0x000C0000 /* Cycle counter width */ +#define SSB_IDLOW_CCW_SHIFT 18 +#define SSB_IDLOW_TPT 0x00F00000 /* Target ports */ +#define SSB_IDLOW_TPT_SHIFT 20 +#define SSB_IDLOW_INITP 0x0F000000 /* Initiator ports */ +#define SSB_IDLOW_INITP_SHIFT 24 +#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */ +#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */ +#define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */ +#define SSB_IDLOW_SSBREV_24 0x40000000 /* ?? Found in BCM4328 */ +#define SSB_IDLOW_SSBREV_25 0x50000000 /* ?? Not Found yet */ +#define SSB_IDLOW_SSBREV_26 0x60000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDLOW_SSBREV_27 0x70000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDHIGH 0x0FFC /* SB Identification High */ +#define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */ +#define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */ +#define SSB_IDHIGH_CC_SHIFT 4 +#define SSB_IDHIGH_RCHI 0x00007000 /* Revision Code (high part) */ +#define SSB_IDHIGH_RCHI_SHIFT 8 /* yes, shift 8 is right */ +#define SSB_IDHIGH_VC 0xFFFF0000 /* Vendor Code */ +#define SSB_IDHIGH_VC_SHIFT 16 + +/* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read + * in two-byte quantities. + */ +#define SSB_SPROMSIZE_WORDS 64 +#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +#define SSB_SPROMSIZE_WORDS_R123 64 +#define SSB_SPROMSIZE_WORDS_R4 220 +#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) +#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +#define SSB_SPROM_BASE1 0x1000 +#define SSB_SPROM_BASE31 0x0800 +#define SSB_SPROM_REVISION 0x007E +#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ +#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ +#define SSB_SPROM_REVISION_CRC_SHIFT 8 + +/* SPROM Revision 1 */ +#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ +#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ +#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ +#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ +#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ +#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ +#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ +#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 +#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ +#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +#define SSB_SPROM1_BINF 0x005C /* Board info */ +#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ +#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ +#define SSB_SPROM1_BINF_CCODE_SHIFT 8 +#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */ +#define SSB_SPROM1_BINF_ANTBG_SHIFT 12 +#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ +#define SSB_SPROM1_BINF_ANTA_SHIFT 14 +#define SSB_SPROM1_PA0B0 0x005E +#define SSB_SPROM1_PA0B1 0x0060 +#define SSB_SPROM1_PA0B2 0x0062 +#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ +#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM1_GPIOA_P1_SHIFT 8 +#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ +#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM1_GPIOB_P3_SHIFT 8 +#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ +#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A_SHIFT 8 +#define SSB_SPROM1_PA1B0 0x006A +#define SSB_SPROM1_PA1B1 0x006C +#define SSB_SPROM1_PA1B2 0x006E +#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ +#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ +#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_ITSSI_A_SHIFT 8 +#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ +#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ +#define SSB_SPROM1_AGAIN_BG_SHIFT 0 +#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_AGAIN_A_SHIFT 8 + +/* SPROM Revision 2 (inherits from rev 1) */ +#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ +#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ +#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ +#define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ +#define SSB_SPROM2_OPO_VALUE 0x00FF +#define SSB_SPROM2_OPO_UNUSED 0xFF00 +#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + +/* SPROM Revision 3 (inherits most data from rev 2) */ +#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ +#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ +#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 +#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ +#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ +#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ +#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ +#define SSB_SPROM3_CCKPO_2M_SHIFT 4 +#define SSB_SPROM3_CCKPO_55M 0x0F00 /* 5.5M Rate PO */ +#define SSB_SPROM3_CCKPO_55M_SHIFT 8 +#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */ +#define SSB_SPROM3_CCKPO_11M_SHIFT 12 +#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + +/* SPROM Revision 4 */ +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ +#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */ +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 +#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM4_AGAIN0_SHIFT 0 +#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM4_AGAIN1_SHIFT 8 +#define SSB_SPROM4_AGAIN23 0x0060 +#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM4_AGAIN2_SHIFT 0 +#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM4_AGAIN3_SHIFT 8 +#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */ +#define SSB_SPROM4_TXPID2G0 0x00FF +#define SSB_SPROM4_TXPID2G0_SHIFT 0 +#define SSB_SPROM4_TXPID2G1 0xFF00 +#define SSB_SPROM4_TXPID2G1_SHIFT 8 +#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */ +#define SSB_SPROM4_TXPID2G2 0x00FF +#define SSB_SPROM4_TXPID2G2_SHIFT 0 +#define SSB_SPROM4_TXPID2G3 0xFF00 +#define SSB_SPROM4_TXPID2G3_SHIFT 8 +#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */ +#define SSB_SPROM4_TXPID5G0 0x00FF +#define SSB_SPROM4_TXPID5G0_SHIFT 0 +#define SSB_SPROM4_TXPID5G1 0xFF00 +#define SSB_SPROM4_TXPID5G1_SHIFT 8 +#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */ +#define SSB_SPROM4_TXPID5G2 0x00FF +#define SSB_SPROM4_TXPID5G2_SHIFT 0 +#define SSB_SPROM4_TXPID5G3 0xFF00 +#define SSB_SPROM4_TXPID5G3_SHIFT 8 +#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */ +#define SSB_SPROM4_TXPID5GL0 0x00FF +#define SSB_SPROM4_TXPID5GL0_SHIFT 0 +#define SSB_SPROM4_TXPID5GL1 0xFF00 +#define SSB_SPROM4_TXPID5GL1_SHIFT 8 +#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */ +#define SSB_SPROM4_TXPID5GL2 0x00FF +#define SSB_SPROM4_TXPID5GL2_SHIFT 0 +#define SSB_SPROM4_TXPID5GL3 0xFF00 +#define SSB_SPROM4_TXPID5GL3_SHIFT 8 +#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */ +#define SSB_SPROM4_TXPID5GH0 0x00FF +#define SSB_SPROM4_TXPID5GH0_SHIFT 0 +#define SSB_SPROM4_TXPID5GH1 0xFF00 +#define SSB_SPROM4_TXPID5GH1_SHIFT 8 +#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */ +#define SSB_SPROM4_TXPID5GH2 0x00FF +#define SSB_SPROM4_TXPID5GH2_SHIFT 0 +#define SSB_SPROM4_TXPID5GH3 0xFF00 +#define SSB_SPROM4_TXPID5GH3_SHIFT 8 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ +#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +#define SSB_SPROM4_ITSSI_BG_SHIFT 8 +#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ +#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ +#define SSB_SPROM4_ITSSI_A_SHIFT 8 +#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ +#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ +#define SSB_SPROM4_PA0B2 0x0086 +#define SSB_SPROM4_PA1B0 0x008E +#define SSB_SPROM4_PA1B1 0x0090 +#define SSB_SPROM4_PA1B2 0x0092 + +/* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ +#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */ +#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */ +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM5_GPIOA_P1_SHIFT 8 +#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM5_GPIOB_P3_SHIFT 8 + +/* SPROM Revision 8 */ +#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ +#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ +#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ +#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ +#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ +#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ +#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM8_AGAIN0_SHIFT 0 +#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM8_AGAIN1_SHIFT 8 +#define SSB_SPROM8_AGAIN23 0x00A0 +#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM8_AGAIN2_SHIFT 0 +#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM8_AGAIN3_SHIFT 8 +#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSISMF2G 0x000F +#define SSB_SPROM8_RSSISMC2G 0x00F0 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4 +#define SSB_SPROM8_RSSISAV2G 0x0700 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8 +#define SSB_SPROM8_BXA2G 0x1800 +#define SSB_SPROM8_BXA2G_SHIFT 11 +#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSISMF5G 0x000F +#define SSB_SPROM8_RSSISMC5G 0x00F0 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4 +#define SSB_SPROM8_RSSISAV5G 0x0700 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8 +#define SSB_SPROM8_BXA5G 0x1800 +#define SSB_SPROM8_BXA5G_SHIFT 11 +#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ +#define SSB_SPROM8_TRI5G_SHIFT 8 +#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ +#define SSB_SPROM8_TRI5GH_SHIFT 8 +#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ +#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +#define SSB_SPROM8_ITSSI_BG_SHIFT 8 +#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ +#define SSB_SPROM8_PA0B1 0x00C4 +#define SSB_SPROM8_PA0B2 0x00C6 +#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ +#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ +#define SSB_SPROM8_ITSSI_A_SHIFT 8 +#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ +#define SSB_SPROM8_MAXP_AL_SHIFT 8 +#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ +#define SSB_SPROM8_PA1B1 0x00CE +#define SSB_SPROM8_PA1B2 0x00D0 +#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ +#define SSB_SPROM8_PA1LOB1 0x00D4 +#define SSB_SPROM8_PA1LOB2 0x00D6 +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x00DA +#define SSB_SPROM8_PA1HIB2 0x00DC +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ + +/* Values for boardflags_hi read from SPROM */ +#define SSB_BFH_NOPA 0x0001 /* has no PA */ +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ + +/* Values for boardflags2_lo read from SPROM */ +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + +/* Values for SSB_SPROM1_BINF_CCODE */ +enum { + SSB_SPROM1CCODE_WORLD = 0, + SSB_SPROM1CCODE_THAILAND, + SSB_SPROM1CCODE_ISRAEL, + SSB_SPROM1CCODE_JORDAN, + SSB_SPROM1CCODE_CHINA, + SSB_SPROM1CCODE_JAPAN, + SSB_SPROM1CCODE_USA_CANADA_ANZ, + SSB_SPROM1CCODE_EUROPE, + SSB_SPROM1CCODE_USA_LOW, + SSB_SPROM1CCODE_JAPAN_HIGH, + SSB_SPROM1CCODE_ALL, + SSB_SPROM1CCODE_NONE, +}; + +/* Address-Match values and masks (SSB_ADMATCHxxx) */ +#define SSB_ADM_TYPE 0x00000003 /* Address type */ +#define SSB_ADM_TYPE0 0 +#define SSB_ADM_TYPE1 1 +#define SSB_ADM_TYPE2 2 +#define SSB_ADM_AD64 0x00000004 +#define SSB_ADM_SZ0 0x000000F8 /* Type0 size */ +#define SSB_ADM_SZ0_SHIFT 3 +#define SSB_ADM_SZ1 0x000001F8 /* Type1 size */ +#define SSB_ADM_SZ1_SHIFT 3 +#define SSB_ADM_SZ2 0x000001F8 /* Type2 size */ +#define SSB_ADM_SZ2_SHIFT 3 +#define SSB_ADM_EN 0x00000400 /* Enable */ +#define SSB_ADM_NEG 0x00000800 /* Negative decode */ +#define SSB_ADM_BASE0 0xFFFFFF00 /* Type0 base address */ +#define SSB_ADM_BASE0_SHIFT 8 +#define SSB_ADM_BASE1 0xFFFFF000 /* Type1 base address for the core */ +#define SSB_ADM_BASE1_SHIFT 12 +#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ +#define SSB_ADM_BASE2_SHIFT 16 + + +#endif /* LINUX_SSB_REGS_H_ */ diff --git a/include/compat/linux/tracepoint.h b/include/compat/linux/tracepoint.h new file mode 100755 index 0000000..9f5add1 --- /dev/null +++ b/include/compat/linux/tracepoint.h @@ -0,0 +1,10 @@ +#ifndef _COMPAT_LINUX_TRACEPOINT_H +#define _COMPAT_LINUX_TRACEPOINT_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)) +#include_next +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)) */ + +#endif /* _COMPAT_LINUX_TRACEPOINT_H */ diff --git a/include/compat/linux/unaligned/access_ok.h b/include/compat/linux/unaligned/access_ok.h new file mode 100755 index 0000000..99c1b4d --- /dev/null +++ b/include/compat/linux/unaligned/access_ok.h @@ -0,0 +1,67 @@ +#ifndef _LINUX_UNALIGNED_ACCESS_OK_H +#define _LINUX_UNALIGNED_ACCESS_OK_H + +#include +#include + +static inline u16 get_unaligned_le16(const void *p) +{ + return le16_to_cpup((__le16 *)p); +} + +static inline u32 get_unaligned_le32(const void *p) +{ + return le32_to_cpup((__le32 *)p); +} + +static inline u64 get_unaligned_le64(const void *p) +{ + return le64_to_cpup((__le64 *)p); +} + +static inline u16 get_unaligned_be16(const void *p) +{ + return be16_to_cpup((__be16 *)p); +} + +static inline u32 get_unaligned_be32(const void *p) +{ + return be32_to_cpup((__be32 *)p); +} + +static inline u64 get_unaligned_be64(const void *p) +{ + return be64_to_cpup((__be64 *)p); +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + *((__le16 *)p) = cpu_to_le16(val); +} + +static inline void put_unaligned_le32(u32 val, void *p) +{ + *((__le32 *)p) = cpu_to_le32(val); +} + +static inline void put_unaligned_le64(u64 val, void *p) +{ + *((__le64 *)p) = cpu_to_le64(val); +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + *((__be16 *)p) = cpu_to_be16(val); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + *((__be32 *)p) = cpu_to_be32(val); +} + +static inline void put_unaligned_be64(u64 val, void *p) +{ + *((__be64 *)p) = cpu_to_be64(val); +} + +#endif /* _LINUX_UNALIGNED_ACCESS_OK_H */ diff --git a/include/compat/linux/unaligned/be_byteshift.h b/include/compat/linux/unaligned/be_byteshift.h new file mode 100755 index 0000000..9356b24 --- /dev/null +++ b/include/compat/linux/unaligned/be_byteshift.h @@ -0,0 +1,70 @@ +#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H +#define _LINUX_UNALIGNED_BE_BYTESHIFT_H + +#include + +static inline u16 __get_unaligned_be16(const u8 *p) +{ + return p[0] << 8 | p[1]; +} + +static inline u32 __get_unaligned_be32(const u8 *p) +{ + return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3]; +} + +static inline u64 __get_unaligned_be64(const u8 *p) +{ + return (u64)__get_unaligned_be32(p) << 32 | + __get_unaligned_be32(p + 4); +} + +static inline void __put_unaligned_be16(u16 val, u8 *p) +{ + *p++ = val >> 8; + *p++ = val; +} + +static inline void __put_unaligned_be32(u32 val, u8 *p) +{ + __put_unaligned_be16(val >> 16, p); + __put_unaligned_be16(val, p + 2); +} + +static inline void __put_unaligned_be64(u64 val, u8 *p) +{ + __put_unaligned_be32(val >> 32, p); + __put_unaligned_be32(val, p + 4); +} + +static inline u16 get_unaligned_be16(const void *p) +{ + return __get_unaligned_be16((const u8 *)p); +} + +static inline u32 get_unaligned_be32(const void *p) +{ + return __get_unaligned_be32((const u8 *)p); +} + +static inline u64 get_unaligned_be64(const void *p) +{ + return __get_unaligned_be64((const u8 *)p); +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + __put_unaligned_be16(val, p); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + __put_unaligned_be32(val, p); +} + +static inline void put_unaligned_be64(u64 val, void *p) +{ + __put_unaligned_be64(val, p); +} + +#endif /* _LINUX_UNALIGNED_BE_BYTESHIFT_H */ diff --git a/include/compat/linux/unaligned/be_memmove.h b/include/compat/linux/unaligned/be_memmove.h new file mode 100755 index 0000000..c2a76c5 --- /dev/null +++ b/include/compat/linux/unaligned/be_memmove.h @@ -0,0 +1,36 @@ +#ifndef _LINUX_UNALIGNED_BE_MEMMOVE_H +#define _LINUX_UNALIGNED_BE_MEMMOVE_H + +#include + +static inline u16 get_unaligned_be16(const void *p) +{ + return __get_unaligned_memmove16((const u8 *)p); +} + +static inline u32 get_unaligned_be32(const void *p) +{ + return __get_unaligned_memmove32((const u8 *)p); +} + +static inline u64 get_unaligned_be64(const void *p) +{ + return __get_unaligned_memmove64((const u8 *)p); +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + __put_unaligned_memmove16(val, p); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + __put_unaligned_memmove32(val, p); +} + +static inline void put_unaligned_be64(u64 val, void *p) +{ + __put_unaligned_memmove64(val, p); +} + +#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */ diff --git a/include/compat/linux/unaligned/be_struct.h b/include/compat/linux/unaligned/be_struct.h new file mode 100755 index 0000000..1324158 --- /dev/null +++ b/include/compat/linux/unaligned/be_struct.h @@ -0,0 +1,36 @@ +#ifndef _LINUX_UNALIGNED_BE_STRUCT_H +#define _LINUX_UNALIGNED_BE_STRUCT_H + +#include + +static inline u16 get_unaligned_be16(const void *p) +{ + return __get_unaligned_cpu16((const u8 *)p); +} + +static inline u32 get_unaligned_be32(const void *p) +{ + return __get_unaligned_cpu32((const u8 *)p); +} + +static inline u64 get_unaligned_be64(const void *p) +{ + return __get_unaligned_cpu64((const u8 *)p); +} + +static inline void put_unaligned_be16(u16 val, void *p) +{ + __put_unaligned_cpu16(val, p); +} + +static inline void put_unaligned_be32(u32 val, void *p) +{ + __put_unaligned_cpu32(val, p); +} + +static inline void put_unaligned_be64(u64 val, void *p) +{ + __put_unaligned_cpu64(val, p); +} + +#endif /* _LINUX_UNALIGNED_BE_STRUCT_H */ diff --git a/include/compat/linux/unaligned/generic.h b/include/compat/linux/unaligned/generic.h new file mode 100755 index 0000000..02d97ff --- /dev/null +++ b/include/compat/linux/unaligned/generic.h @@ -0,0 +1,68 @@ +#ifndef _LINUX_UNALIGNED_GENERIC_H +#define _LINUX_UNALIGNED_GENERIC_H + +/* + * Cause a link-time error if we try an unaligned access other than + * 1,2,4 or 8 bytes long + */ +extern void __bad_unaligned_access_size(void); + +#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({ \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)), \ + __bad_unaligned_access_size())))); \ + })) + +#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({ \ + __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ + __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)), \ + __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)), \ + __bad_unaligned_access_size())))); \ + })) + +#define __put_unaligned_le(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_le16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_le32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_le64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#define __put_unaligned_be(val, ptr) ({ \ + void *__gu_p = (ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(u8 *)__gu_p = (__force u8)(val); \ + break; \ + case 2: \ + put_unaligned_be16((__force u16)(val), __gu_p); \ + break; \ + case 4: \ + put_unaligned_be32((__force u32)(val), __gu_p); \ + break; \ + case 8: \ + put_unaligned_be64((__force u64)(val), __gu_p); \ + break; \ + default: \ + __bad_unaligned_access_size(); \ + break; \ + } \ + (void)0; }) + +#endif /* _LINUX_UNALIGNED_GENERIC_H */ diff --git a/include/compat/linux/unaligned/le_byteshift.h b/include/compat/linux/unaligned/le_byteshift.h new file mode 100755 index 0000000..be376fb --- /dev/null +++ b/include/compat/linux/unaligned/le_byteshift.h @@ -0,0 +1,70 @@ +#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H +#define _LINUX_UNALIGNED_LE_BYTESHIFT_H + +#include + +static inline u16 __get_unaligned_le16(const u8 *p) +{ + return p[0] | p[1] << 8; +} + +static inline u32 __get_unaligned_le32(const u8 *p) +{ + return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24; +} + +static inline u64 __get_unaligned_le64(const u8 *p) +{ + return (u64)__get_unaligned_le32(p + 4) << 32 | + __get_unaligned_le32(p); +} + +static inline void __put_unaligned_le16(u16 val, u8 *p) +{ + *p++ = val; + *p++ = val >> 8; +} + +static inline void __put_unaligned_le32(u32 val, u8 *p) +{ + __put_unaligned_le16(val >> 16, p + 2); + __put_unaligned_le16(val, p); +} + +static inline void __put_unaligned_le64(u64 val, u8 *p) +{ + __put_unaligned_le32(val >> 32, p + 4); + __put_unaligned_le32(val, p); +} + +static inline u16 get_unaligned_le16(const void *p) +{ + return __get_unaligned_le16((const u8 *)p); +} + +static inline u32 get_unaligned_le32(const void *p) +{ + return __get_unaligned_le32((const u8 *)p); +} + +static inline u64 get_unaligned_le64(const void *p) +{ + return __get_unaligned_le64((const u8 *)p); +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + __put_unaligned_le16(val, p); +} + +static inline void put_unaligned_le32(u32 val, void *p) +{ + __put_unaligned_le32(val, p); +} + +static inline void put_unaligned_le64(u64 val, void *p) +{ + __put_unaligned_le64(val, p); +} + +#endif /* _LINUX_UNALIGNED_LE_BYTESHIFT_H */ diff --git a/include/compat/linux/unaligned/le_memmove.h b/include/compat/linux/unaligned/le_memmove.h new file mode 100755 index 0000000..269849b --- /dev/null +++ b/include/compat/linux/unaligned/le_memmove.h @@ -0,0 +1,36 @@ +#ifndef _LINUX_UNALIGNED_LE_MEMMOVE_H +#define _LINUX_UNALIGNED_LE_MEMMOVE_H + +#include + +static inline u16 get_unaligned_le16(const void *p) +{ + return __get_unaligned_memmove16((const u8 *)p); +} + +static inline u32 get_unaligned_le32(const void *p) +{ + return __get_unaligned_memmove32((const u8 *)p); +} + +static inline u64 get_unaligned_le64(const void *p) +{ + return __get_unaligned_memmove64((const u8 *)p); +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + __put_unaligned_memmove16(val, p); +} + +static inline void put_unaligned_le32(u32 val, void *p) +{ + __put_unaligned_memmove32(val, p); +} + +static inline void put_unaligned_le64(u64 val, void *p) +{ + __put_unaligned_memmove64(val, p); +} + +#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */ diff --git a/include/compat/linux/unaligned/le_struct.h b/include/compat/linux/unaligned/le_struct.h new file mode 100755 index 0000000..088c457 --- /dev/null +++ b/include/compat/linux/unaligned/le_struct.h @@ -0,0 +1,36 @@ +#ifndef _LINUX_UNALIGNED_LE_STRUCT_H +#define _LINUX_UNALIGNED_LE_STRUCT_H + +#include + +static inline u16 get_unaligned_le16(const void *p) +{ + return __get_unaligned_cpu16((const u8 *)p); +} + +static inline u32 get_unaligned_le32(const void *p) +{ + return __get_unaligned_cpu32((const u8 *)p); +} + +static inline u64 get_unaligned_le64(const void *p) +{ + return __get_unaligned_cpu64((const u8 *)p); +} + +static inline void put_unaligned_le16(u16 val, void *p) +{ + __put_unaligned_cpu16(val, p); +} + +static inline void put_unaligned_le32(u32 val, void *p) +{ + __put_unaligned_cpu32(val, p); +} + +static inline void put_unaligned_le64(u64 val, void *p) +{ + __put_unaligned_cpu64(val, p); +} + +#endif /* _LINUX_UNALIGNED_LE_STRUCT_H */ diff --git a/include/compat/linux/unaligned/memmove.h b/include/compat/linux/unaligned/memmove.h new file mode 100755 index 0000000..eeb5a77 --- /dev/null +++ b/include/compat/linux/unaligned/memmove.h @@ -0,0 +1,45 @@ +#ifndef _LINUX_UNALIGNED_MEMMOVE_H +#define _LINUX_UNALIGNED_MEMMOVE_H + +#include +#include + +/* Use memmove here, so gcc does not insert a __builtin_memcpy. */ + +static inline u16 __get_unaligned_memmove16(const void *p) +{ + u16 tmp; + memmove(&tmp, p, 2); + return tmp; +} + +static inline u32 __get_unaligned_memmove32(const void *p) +{ + u32 tmp; + memmove(&tmp, p, 4); + return tmp; +} + +static inline u64 __get_unaligned_memmove64(const void *p) +{ + u64 tmp; + memmove(&tmp, p, 8); + return tmp; +} + +static inline void __put_unaligned_memmove16(u16 val, void *p) +{ + memmove(p, &val, 2); +} + +static inline void __put_unaligned_memmove32(u32 val, void *p) +{ + memmove(p, &val, 4); +} + +static inline void __put_unaligned_memmove64(u64 val, void *p) +{ + memmove(p, &val, 8); +} + +#endif /* _LINUX_UNALIGNED_MEMMOVE_H */ diff --git a/include/compat/linux/unaligned/packed_struct.h b/include/compat/linux/unaligned/packed_struct.h new file mode 100755 index 0000000..2498bb9 --- /dev/null +++ b/include/compat/linux/unaligned/packed_struct.h @@ -0,0 +1,46 @@ +#ifndef _LINUX_UNALIGNED_PACKED_STRUCT_H +#define _LINUX_UNALIGNED_PACKED_STRUCT_H + +#include + +struct __una_u16 { u16 x __attribute__((packed)); }; +struct __una_u32 { u32 x __attribute__((packed)); }; +struct __una_u64 { u64 x __attribute__((packed)); }; + +static inline u16 __get_unaligned_cpu16(const void *p) +{ + const struct __una_u16 *ptr = (const struct __una_u16 *)p; + return ptr->x; +} + +static inline u32 __get_unaligned_cpu32(const void *p) +{ + const struct __una_u32 *ptr = (const struct __una_u32 *)p; + return ptr->x; +} + +static inline u64 __get_unaligned_cpu64(const void *p) +{ + const struct __una_u64 *ptr = (const struct __una_u64 *)p; + return ptr->x; +} + +static inline void __put_unaligned_cpu16(u16 val, void *p) +{ + struct __una_u16 *ptr = (struct __una_u16 *)p; + ptr->x = val; +} + +static inline void __put_unaligned_cpu32(u32 val, void *p) +{ + struct __una_u32 *ptr = (struct __una_u32 *)p; + ptr->x = val; +} + +static inline void __put_unaligned_cpu64(u64 val, void *p) +{ + struct __una_u64 *ptr = (struct __una_u64 *)p; + ptr->x = val; +} + +#endif /* _LINUX_UNALIGNED_PACKED_STRUCT_H */ diff --git a/include/compat/linux/usb/rndis_host.h b/include/compat/linux/usb/rndis_host.h new file mode 100755 index 0000000..88fceb7 --- /dev/null +++ b/include/compat/linux/usb/rndis_host.h @@ -0,0 +1,272 @@ +/* + * Host Side support for RNDIS Networking Links + * Copyright (C) 2005 by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_RNDIS_HOST_H +#define __LINUX_USB_RNDIS_HOST_H + +/* + * CONTROL uses CDC "encapsulated commands" with funky notifications. + * - control-out: SEND_ENCAPSULATED + * - interrupt-in: RESPONSE_AVAILABLE + * - control-in: GET_ENCAPSULATED + * + * We'll try to ignore the RESPONSE_AVAILABLE notifications. + * + * REVISIT some RNDIS implementations seem to have curious issues still + * to be resolved. + */ +struct rndis_msg_hdr { + __le32 msg_type; /* RNDIS_MSG_* */ + __le32 msg_len; + /* followed by data that varies between messages */ + __le32 request_id; + __le32 status; + /* ... and more */ +} __attribute__ ((packed)); + +/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */ +#define CONTROL_BUFFER_SIZE 1025 + +/* RNDIS defines an (absurdly huge) 10 second control timeout, + * but ActiveSync seems to use a more usual 5 second timeout + * (which matches the USB 2.0 spec). + */ +#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000) + +#define RNDIS_MSG_COMPLETION cpu_to_le32(0x80000000) + +/* codes for "msg_type" field of rndis messages; + * only the data channel uses packet messages (maybe batched); + * everything else goes on the control channel. + */ +#define RNDIS_MSG_PACKET cpu_to_le32(0x00000001) /* 1-N packets */ +#define RNDIS_MSG_INIT cpu_to_le32(0x00000002) +#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION) +#define RNDIS_MSG_HALT cpu_to_le32(0x00000003) +#define RNDIS_MSG_QUERY cpu_to_le32(0x00000004) +#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION) +#define RNDIS_MSG_SET cpu_to_le32(0x00000005) +#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION) +#define RNDIS_MSG_RESET cpu_to_le32(0x00000006) +#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION) +#define RNDIS_MSG_INDICATE cpu_to_le32(0x00000007) +#define RNDIS_MSG_KEEPALIVE cpu_to_le32(0x00000008) +#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) + +/* codes for "status" field of completion messages */ +#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) +#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) +#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) +#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) +#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) +#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) +#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012) + +/* codes for OID_GEN_PHYSICAL_MEDIUM */ +#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000) +#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN cpu_to_le32(0x00000001) +#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM cpu_to_le32(0x00000002) +#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE cpu_to_le32(0x00000003) +#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE cpu_to_le32(0x00000004) +#define RNDIS_PHYSICAL_MEDIUM_DSL cpu_to_le32(0x00000005) +#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL cpu_to_le32(0x00000006) +#define RNDIS_PHYSICAL_MEDIUM_1394 cpu_to_le32(0x00000007) +#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN cpu_to_le32(0x00000008) +#define RNDIS_PHYSICAL_MEDIUM_MAX cpu_to_le32(0x00000009) + +struct rndis_data_hdr { + __le32 msg_type; /* RNDIS_MSG_PACKET */ + __le32 msg_len; /* rndis_data_hdr + data_len + pad */ + __le32 data_offset; /* 36 -- right after header */ + __le32 data_len; /* ... real packet size */ + + __le32 oob_data_offset; /* zero */ + __le32 oob_data_len; /* zero */ + __le32 num_oob; /* zero */ + __le32 packet_data_offset; /* zero */ + + __le32 packet_data_len; /* zero */ + __le32 vc_handle; /* zero */ + __le32 reserved; /* zero */ +} __attribute__ ((packed)); + +struct rndis_init { /* OUT */ + /* header and: */ + __le32 msg_type; /* RNDIS_MSG_INIT */ + __le32 msg_len; /* 24 */ + __le32 request_id; + __le32 major_version; /* of rndis (1.0) */ + __le32 minor_version; + __le32 max_transfer_size; +} __attribute__ ((packed)); + +struct rndis_init_c { /* IN */ + /* header and: */ + __le32 msg_type; /* RNDIS_MSG_INIT_C */ + __le32 msg_len; + __le32 request_id; + __le32 status; + __le32 major_version; /* of rndis (1.0) */ + __le32 minor_version; + __le32 device_flags; + __le32 medium; /* zero == 802.3 */ + __le32 max_packets_per_message; + __le32 max_transfer_size; + __le32 packet_alignment; /* max 7; (1< + * Copyright (C) 2003-2005 David Hollis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_USBNET_H +#define __LINUX_USB_USBNET_H + +/* interface from usbnet core to each USB networking link we handle */ +struct usbnet { + /* housekeeping */ + struct usb_device *udev; + struct usb_interface *intf; + struct driver_info *driver_info; + const char *driver_name; + void *driver_priv; + wait_queue_head_t *wait; + struct mutex phy_mutex; + unsigned char suspend_count; + + /* i/o info: pipes etc */ + unsigned in, out; + struct usb_host_endpoint *status; + unsigned maxpacket; + struct timer_list delay; + + /* protocol/interface state */ + struct net_device *net; + int msg_enable; + unsigned long data[5]; + u32 xid; + u32 hard_mtu; /* count any extra framing */ + size_t rx_urb_size; /* size for rx urbs */ + struct mii_if_info mii; + + /* various kinds of pending driver work */ + struct sk_buff_head rxq; + struct sk_buff_head txq; + struct sk_buff_head done; + struct sk_buff_head rxq_pause; + struct urb *interrupt; + struct usb_anchor deferred; + struct tasklet_struct bh; + + struct work_struct kevent; + unsigned long flags; +# define EVENT_TX_HALT 0 +# define EVENT_RX_HALT 1 +# define EVENT_RX_MEMORY 2 +# define EVENT_STS_SPLIT 3 +# define EVENT_LINK_RESET 4 +# define EVENT_RX_PAUSED 5 +# define EVENT_DEV_WAKING 6 +# define EVENT_DEV_ASLEEP 7 +# define EVENT_DEV_OPEN 8 +}; + +static inline struct usb_driver *driver_of(struct usb_interface *intf) +{ + return to_usb_driver(intf->dev.driver); +} + +/* interface from the device/framing level "minidriver" to core */ +struct driver_info { + char *description; + + int flags; +/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */ +#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */ +#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */ +#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */ +#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */ + +#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */ +#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ + +#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ +#define FLAG_WLAN 0x0080 /* use "wlan%d" names */ +#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */ +#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */ +#define FLAG_WWAN 0x0400 /* use "wwan%d" names */ + +#define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ + +#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ + +/* + * Indicates to usbnet, that USB driver accumulates multiple IP packets. + * Affects statistic (counters) and short packet handling. + */ +#define FLAG_MULTI_PACKET 0x2000 +#define FLAG_RX_ASSEMBLE 0x4000 /* rx packets may span >1 frames */ + + /* init device ... can sleep, or cause probe() failure */ + int (*bind)(struct usbnet *, struct usb_interface *); + + /* cleanup device ... can sleep, but can't fail */ + void (*unbind)(struct usbnet *, struct usb_interface *); + + /* reset device ... can sleep */ + int (*reset)(struct usbnet *); + + /* stop device ... can sleep */ + int (*stop)(struct usbnet *); + + /* see if peer is connected ... can sleep */ + int (*check_connect)(struct usbnet *); + + /* (dis)activate runtime power management */ + int (*manage_power)(struct usbnet *, int); + + /* for status polling */ + void (*status)(struct usbnet *, struct urb *); + + /* link reset handling, called from defer_kevent */ + int (*link_reset)(struct usbnet *); + + /* fixup rx packet (strip framing) */ + int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb); + + /* fixup tx packet (add framing) */ + struct sk_buff *(*tx_fixup)(struct usbnet *dev, + struct sk_buff *skb, gfp_t flags); + + /* early initialization code, can sleep. This is for minidrivers + * having 'subminidrivers' that need to do extra initialization + * right after minidriver have initialized hardware. */ + int (*early_init)(struct usbnet *dev); + + /* called by minidriver when receiving indication */ + void (*indication)(struct usbnet *dev, void *ind, int indlen); + + /* for new devices, use the descriptor-reading code instead */ + int in; /* rx endpoint */ + int out; /* tx endpoint */ + + unsigned long data; /* Misc driver specific data */ +}; + +/* Minidrivers are just drivers using the "usbnet" core as a powerful + * network-specific subroutine library ... that happens to do pretty + * much everything except custom framing and chip-specific stuff. + */ +extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *); +extern int usbnet_suspend(struct usb_interface *, pm_message_t); +extern int usbnet_resume(struct usb_interface *); +extern void usbnet_disconnect(struct usb_interface *); + + +/* Drivers that reuse some of the standard USB CDC infrastructure + * (notably, using multiple interfaces according to the CDC + * union descriptor) get some helper code. + */ +struct cdc_state { + struct usb_cdc_header_desc *header; + struct usb_cdc_union_desc *u; + struct usb_cdc_ether_desc *ether; + struct usb_interface *control; + struct usb_interface *data; +}; + +extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *); +extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *); +extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *); +extern void usbnet_cdc_status(struct usbnet *, struct urb *); + +/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */ +#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ + |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ + |USB_CDC_PACKET_TYPE_PROMISCUOUS \ + |USB_CDC_PACKET_TYPE_DIRECTED) + + +/* we record the state for each of our queued skbs */ +enum skb_state { + illegal = 0, + tx_start, tx_done, + rx_start, rx_done, rx_cleanup +}; + +struct skb_data { /* skb->cb is one of these */ + struct urb *urb; + struct usbnet *dev; + enum skb_state state; + size_t length; +}; + +extern int usbnet_open(struct net_device *net); +extern int usbnet_stop(struct net_device *net); +extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb, + struct net_device *net); +extern void usbnet_tx_timeout(struct net_device *net); +extern int usbnet_change_mtu(struct net_device *net, int new_mtu); + +extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); +extern int usbnet_get_ethernet_addr(struct usbnet *, int); +extern void usbnet_defer_kevent(struct usbnet *, int); +extern void usbnet_skb_return(struct usbnet *, struct sk_buff *); +extern void usbnet_unlink_rx_urbs(struct usbnet *); + +extern void usbnet_pause_rx(struct usbnet *); +extern void usbnet_resume_rx(struct usbnet *); +extern void usbnet_purge_paused_rxq(struct usbnet *); + +extern int usbnet_get_settings(struct net_device *net, + struct ethtool_cmd *cmd); +extern int usbnet_set_settings(struct net_device *net, + struct ethtool_cmd *cmd); +extern u32 usbnet_get_link(struct net_device *net); +extern u32 usbnet_get_msglevel(struct net_device *); +extern void usbnet_set_msglevel(struct net_device *, u32); +extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); +extern int usbnet_nway_reset(struct net_device *net); + +#endif /* __LINUX_USB_USBNET_H */ diff --git a/include/compat/linux/version.h b/include/compat/linux/version.h new file mode 100755 index 0000000..527f360 --- /dev/null +++ b/include/compat/linux/version.h @@ -0,0 +1,2 @@ +#define LINUX_VERSION_CODE 196623 +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) diff --git a/include/compat/linux/wakelock.h b/include/compat/linux/wakelock.h new file mode 100755 index 0000000..a9407fe --- /dev/null +++ b/include/compat/linux/wakelock.h @@ -0,0 +1,90 @@ +/* include/linux/wakelock.h + * + * Copyright (C) 2007-2008 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _LINUX_WAKELOCK_H +#define _LINUX_WAKELOCK_H + +#include +#include + +/* A wake_lock prevents the system from entering suspend or other low power + * states when active. If the type is set to WAKE_LOCK_SUSPEND, the wake_lock + * prevents a full system suspend. If the type is WAKE_LOCK_IDLE, low power + * states that cause large interrupt latencies or that disable a set of + * interrupts will not entered from idle until the wake_locks are released. + */ + +enum { + WAKE_LOCK_SUSPEND, /* Prevent suspend */ + WAKE_LOCK_IDLE, /* Prevent low power idle */ + WAKE_LOCK_TYPE_COUNT +}; + +struct wake_lock { +#ifdef CONFIG_HAS_WAKELOCK + struct list_head link; + int flags; + const char *name; + unsigned long expires; +#ifdef CONFIG_WAKELOCK_STAT + struct { + int count; + int expire_count; + int wakeup_count; + ktime_t total_time; + ktime_t prevent_suspend_time; + ktime_t max_time; + ktime_t last_time; + } stat; +#endif +#endif +}; + +#ifdef CONFIG_HAS_WAKELOCK + +void wake_lock_init(struct wake_lock *lock, int type, const char *name); +void wake_lock_destroy(struct wake_lock *lock); +void wake_lock(struct wake_lock *lock); +void wake_lock_timeout(struct wake_lock *lock, long timeout); +void wake_unlock(struct wake_lock *lock); + +/* wake_lock_active returns a non-zero value if the wake_lock is currently + * locked. If the wake_lock has a timeout, it does not check the timeout + * but if the timeout had aready been checked it will return 0. + */ +int wake_lock_active(struct wake_lock *lock); + +/* has_wake_lock returns 0 if no wake locks of the specified type are active, + * and non-zero if one or more wake locks are held. Specifically it returns + * -1 if one or more wake locks with no timeout are active or the + * number of jiffies until all active wake locks time out. + */ +long has_wake_lock(int type); + +#else + +static inline void wake_lock_init(struct wake_lock *lock, int type, + const char *name) {} +static inline void wake_lock_destroy(struct wake_lock *lock) {} +static inline void wake_lock(struct wake_lock *lock) {} +static inline void wake_lock_timeout(struct wake_lock *lock, long timeout) {} +static inline void wake_unlock(struct wake_lock *lock) {} + +static inline int wake_lock_active(struct wake_lock *lock) { return 0; } +static inline long has_wake_lock(int type) { return 0; } + +#endif + +#endif diff --git a/include/compat/linux/wireless.h b/include/compat/linux/wireless.h new file mode 100755 index 0000000..ef886ac --- /dev/null +++ b/include/compat/linux/wireless.h @@ -0,0 +1,1162 @@ +/* + * This file define a set of standard wireless extensions + * + * Version : 22 16.3.07 + * + * Authors : Jean Tourrilhes - HPL - + * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. + */ + +#ifndef _LINUX_WIRELESS_H +#define _LINUX_WIRELESS_H + +/************************** DOCUMENTATION **************************/ +/* + * Initial APIs (1996 -> onward) : + * ----------------------------- + * Basically, the wireless extensions are for now a set of standard ioctl + * call + /proc/net/wireless + * + * The entry /proc/net/wireless give statistics and information on the + * driver. + * This is better than having each driver having its entry because + * its centralised and we may remove the driver module safely. + * + * Ioctl are used to configure the driver and issue commands. This is + * better than command line options of insmod because we may want to + * change dynamically (while the driver is running) some parameters. + * + * The ioctl mechanimsm are copied from standard devices ioctl. + * We have the list of command plus a structure descibing the + * data exchanged... + * Note that to add these ioctl, I was obliged to modify : + * # net/core/dev.c (two place + add include) + * # net/ipv4/af_inet.c (one place + add include) + * + * /proc/net/wireless is a copy of /proc/net/dev. + * We have a structure for data passed from the driver to /proc/net/wireless + * Too add this, I've modified : + * # net/core/dev.c (two other places) + * # include/linux/netdevice.h (one place) + * # include/linux/proc_fs.h (one place) + * + * New driver API (2002 -> onward) : + * ------------------------------- + * This file is only concerned with the user space API and common definitions. + * The new driver API is defined and documented in : + * # include/net/iw_handler.h + * + * Note as well that /proc/net/wireless implementation has now moved in : + * # net/core/wireless.c + * + * Wireless Events (2002 -> onward) : + * -------------------------------- + * Events are defined at the end of this file, and implemented in : + * # net/core/wireless.c + * + * Other comments : + * -------------- + * Do not add here things that are redundant with other mechanisms + * (drivers init, ifconfig, /proc/net/dev, ...) and with are not + * wireless specific. + * + * These wireless extensions are not magic : each driver has to provide + * support for them... + * + * IMPORTANT NOTE : As everything in the kernel, this is very much a + * work in progress. Contact me if you have ideas of improvements... + */ + +/***************************** INCLUDES *****************************/ + +#include /* for __u* and __s* typedefs */ +#include /* for "struct sockaddr" et al */ +#include /* for IFNAMSIZ and co... */ + +/***************************** VERSION *****************************/ +/* + * This constant is used to know the availability of the wireless + * extensions and to know which version of wireless extensions it is + * (there is some stuff that will be added in the future...) + * I just plan to increment with each new version. + */ +#define WIRELESS_EXT 22 + +/* + * Changes : + * + * V2 to V3 + * -------- + * Alan Cox start some incompatibles changes. I've integrated a bit more. + * - Encryption renamed to Encode to avoid US regulation problems + * - Frequency changed from float to struct to avoid problems on old 386 + * + * V3 to V4 + * -------- + * - Add sensitivity + * + * V4 to V5 + * -------- + * - Missing encoding definitions in range + * - Access points stuff + * + * V5 to V6 + * -------- + * - 802.11 support (ESSID ioctls) + * + * V6 to V7 + * -------- + * - define IW_ESSID_MAX_SIZE and IW_MAX_AP + * + * V7 to V8 + * -------- + * - Changed my e-mail address + * - More 802.11 support (nickname, rate, rts, frag) + * - List index in frequencies + * + * V8 to V9 + * -------- + * - Support for 'mode of operation' (ad-hoc, managed...) + * - Support for unicast and multicast power saving + * - Change encoding to support larger tokens (>64 bits) + * - Updated iw_params (disable, flags) and use it for NWID + * - Extracted iw_point from iwreq for clarity + * + * V9 to V10 + * --------- + * - Add PM capability to range structure + * - Add PM modifier : MAX/MIN/RELATIVE + * - Add encoding option : IW_ENCODE_NOKEY + * - Add TxPower ioctls (work like TxRate) + * + * V10 to V11 + * ---------- + * - Add WE version in range (help backward/forward compatibility) + * - Add retry ioctls (work like PM) + * + * V11 to V12 + * ---------- + * - Add SIOCSIWSTATS to get /proc/net/wireless programatically + * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space + * - Add new statistics (frag, retry, beacon) + * - Add average quality (for user space calibration) + * + * V12 to V13 + * ---------- + * - Document creation of new driver API. + * - Extract union iwreq_data from struct iwreq (for new driver API). + * - Rename SIOCSIWNAME as SIOCSIWCOMMIT + * + * V13 to V14 + * ---------- + * - Wireless Events support : define struct iw_event + * - Define additional specific event numbers + * - Add "addr" and "param" fields in union iwreq_data + * - AP scanning stuff (SIOCSIWSCAN and friends) + * + * V14 to V15 + * ---------- + * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg + * - Make struct iw_freq signed (both m & e), add explicit padding + * - Add IWEVCUSTOM for driver specific event/scanning token + * - Add IW_MAX_GET_SPY for driver returning a lot of addresses + * - Add IW_TXPOW_RANGE for range of Tx Powers + * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points + * - Add IW_MODE_MONITOR for passive monitor + * + * V15 to V16 + * ---------- + * - Increase the number of bitrates in iw_range to 32 (for 802.11g) + * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) + * - Reshuffle struct iw_range for increases, add filler + * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses + * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support + * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" + * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index + * + * V16 to V17 + * ---------- + * - Add flags to frequency -> auto/fixed + * - Document (struct iw_quality *)->updated, add new flags (INVALID) + * - Wireless Event capability in struct iw_range + * - Add support for relative TxPower (yick !) + * + * V17 to V18 (From Jouni Malinen ) + * ---------- + * - Add support for WPA/WPA2 + * - Add extended encoding configuration (SIOCSIWENCODEEXT and + * SIOCGIWENCODEEXT) + * - Add SIOCSIWGENIE/SIOCGIWGENIE + * - Add SIOCSIWMLME + * - Add SIOCSIWPMKSA + * - Add struct iw_range bit field for supported encoding capabilities + * - Add optional scan request parameters for SIOCSIWSCAN + * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA + * related parameters (extensible up to 4096 parameter values) + * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, + * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND + * + * V18 to V19 + * ---------- + * - Remove (struct iw_point *)->pointer from events and streams + * - Remove header includes to help user space + * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 + * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros + * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM + * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros + * + * V19 to V20 + * ---------- + * - RtNetlink requests support (SET/GET) + * + * V20 to V21 + * ---------- + * - Remove (struct net_device *)->get_wireless_stats() + * - Change length in ESSID and NICK to strlen() instead of strlen()+1 + * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers + * - Power/Retry relative values no longer * 100000 + * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI + * + * V21 to V22 + * ---------- + * - Prevent leaking of kernel space in stream on 64 bits. + */ + +/**************************** CONSTANTS ****************************/ + +/* -------------------------- IOCTL LIST -------------------------- */ + +/* Wireless Identification */ +#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ +#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ +/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. + * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... + * Don't put the name of your driver there, it's useless. */ + +/* Basic operations */ +#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ +#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ +#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ +#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ +#define SIOCSIWMODE 0x8B06 /* set operation mode */ +#define SIOCGIWMODE 0x8B07 /* get operation mode */ +#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ +#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ + +/* Informative stuff */ +#define SIOCSIWRANGE 0x8B0A /* Unused */ +#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ +#define SIOCSIWPRIV 0x8B0C /* Unused */ +#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ +#define SIOCSIWSTATS 0x8B0E /* Unused */ +#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ +/* SIOCGIWSTATS is strictly used between user space and the kernel, and + * is never passed to the driver (i.e. the driver will never see it). */ + +/* Spy support (statistics per MAC address - used for Mobile IP support) */ +#define SIOCSIWSPY 0x8B10 /* set spy addresses */ +#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ +#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ +#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ + +/* Access Point manipulation */ +#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ +#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ +#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ +#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ +#define SIOCGIWSCAN 0x8B19 /* get scanning results */ + +/* 802.11 specific support */ +#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ +#define SIOCGIWESSID 0x8B1B /* get ESSID */ +#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ +#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ +/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit + * within the 'iwreq' structure, so we need to use the 'data' member to + * point to a string in user space, like it is done for RANGE... */ + +/* Other parameters useful in 802.11 and some other devices */ +#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ +#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ +#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ +#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ +#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ +#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ +#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ +#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ +#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ +#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ + +/* Encoding stuff (scrambling, hardware security, WEP...) */ +#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ +#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ +/* Power saving stuff (power management, unicast and multicast) */ +#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ +#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ + +/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). + * This ioctl uses struct iw_point and data buffer that includes IE id and len + * fields. More than one IE may be included in the request. Setting the generic + * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers + * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers + * are required to report the used IE as a wireless event, e.g., when + * associating with an AP. */ +#define SIOCSIWGENIE 0x8B30 /* set generic IE */ +#define SIOCGIWGENIE 0x8B31 /* get generic IE */ + +/* WPA : IEEE 802.11 MLME requests */ +#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses + * struct iw_mlme */ +/* WPA : Authentication mode parameters */ +#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ +#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ + +/* WPA : Extended version of encoding configuration */ +#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ +#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ + +/* WPA2 : PMKSA cache management */ +#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ + +/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ + +/* These 32 ioctl are wireless device private, for 16 commands. + * Each driver is free to use them for whatever purpose it chooses, + * however the driver *must* export the description of those ioctls + * with SIOCGIWPRIV and *must* use arguments as defined below. + * If you don't follow those rules, DaveM is going to hate you (reason : + * it make mixed 32/64bit operation impossible). + */ +#define SIOCIWFIRSTPRIV 0x8BE0 +#define SIOCIWLASTPRIV 0x8BFF +/* Previously, we were using SIOCDEVPRIVATE, but we now have our + * separate range because of collisions with other tools such as + * 'mii-tool'. + * We now have 32 commands, so a bit more space ;-). + * Also, all 'even' commands are only usable by root and don't return the + * content of ifr/iwr to user (but you are not obliged to use the set/get + * convention, just use every other two command). More details in iwpriv.c. + * And I repeat : you are not forced to use them with iwpriv, but you + * must be compliant with it. + */ + +/* ------------------------- IOCTL STUFF ------------------------- */ + +/* The first and the last (range) */ +#define SIOCIWFIRST 0x8B00 +#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ +#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) +#define IW_HANDLER(id, func) \ + [IW_IOCTL_IDX(id)] = func + +/* Odd : get (world access), even : set (root access) */ +#define IW_IS_SET(cmd) (!((cmd) & 0x1)) +#define IW_IS_GET(cmd) ((cmd) & 0x1) + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* Those are *NOT* ioctls, do not issue request on them !!! */ +/* Most events use the same identifier as ioctl requests */ + +#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ +#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ +#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ +#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ +#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ +#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) + * (scan results); This includes id and + * length fields. One IWEVGENIE may + * contain more than one IE. Scan + * results may contain one or more + * IWEVGENIE events. */ +#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure + * (struct iw_michaelmicfailure) + */ +#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. + * The data includes id and length + * fields and may contain more than one + * IE. This event is required in + * Managed mode if the driver + * generates its own WPA/RSN IE. This + * should be sent just before + * IWEVREGISTERED event for the + * association. */ +#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association + * Response. The data includes id and + * length fields and may contain more + * than one IE. This may be sent + * between IWEVASSOCREQIE and + * IWEVREGISTERED events for the + * association. */ +#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN + * pre-authentication + * (struct iw_pmkid_cand) */ + +#define IWEVFIRST 0x8C00 +#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) + +/* ------------------------- PRIVATE INFO ------------------------- */ +/* + * The following is used with SIOCGIWPRIV. It allow a driver to define + * the interface (name, type of data) for its private ioctl. + * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV + */ + +#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ +#define IW_PRIV_TYPE_NONE 0x0000 +#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ +#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ +#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ +#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ +#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ + +#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ + +#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ + +/* + * Note : if the number of args is fixed and the size < 16 octets, + * instead of passing a pointer we will put args in the iwreq struct... + */ + +/* ----------------------- OTHER CONSTANTS ----------------------- */ + +/* Maximum frequencies in the range struct */ +#define IW_MAX_FREQUENCIES 32 +/* Note : if you have something like 80 frequencies, + * don't increase this constant and don't fill the frequency list. + * The user will be able to set by channel anyway... */ + +/* Maximum bit rates in the range struct */ +#define IW_MAX_BITRATES 32 + +/* Maximum tx powers in the range struct */ +#define IW_MAX_TXPOWER 8 +/* Note : if you more than 8 TXPowers, just set the max and min or + * a few of them in the struct iw_range. */ + +/* Maximum of address that you may set with SPY */ +#define IW_MAX_SPY 8 + +/* Maximum of address that you may get in the + list of access points in range */ +#define IW_MAX_AP 64 + +/* Maximum size of the ESSID and NICKN strings */ +#define IW_ESSID_MAX_SIZE 32 + +/* Modes of operation */ +#define IW_MODE_AUTO 0 /* Let the driver decides */ +#define IW_MODE_ADHOC 1 /* Single cell network */ +#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ +#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ +#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ +#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ +#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ +#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ + +/* Statistics flags (bitmask in updated) */ +#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ +#define IW_QUAL_LEVEL_UPDATED 0x02 +#define IW_QUAL_NOISE_UPDATED 0x04 +#define IW_QUAL_ALL_UPDATED 0x07 +#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ +#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ +#define IW_QUAL_ALL_INVALID 0x70 + +/* Frequency flags */ +#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ +#define IW_FREQ_FIXED 0x01 /* Force a specific value */ + +/* Maximum number of size of encoding token available + * they are listed in the range structure */ +#define IW_MAX_ENCODING_SIZES 8 + +/* Maximum size of the encoding token in bytes */ +#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ + +/* Flags for encoding (along with the token) */ +#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ +#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ +#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ +#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ +#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ +#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ +#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ +#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ +#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ + +/* Power management flags available (along with the value, if any) */ +#define IW_POWER_ON 0x0000 /* No details... */ +#define IW_POWER_TYPE 0xF000 /* Type of parameter */ +#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ +#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ +#define IW_POWER_MODE 0x0F00 /* Power Management mode */ +#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ +#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ +#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ +#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ +#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ +#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ +#define IW_POWER_MIN 0x0001 /* Value is a minimum */ +#define IW_POWER_MAX 0x0002 /* Value is a maximum */ +#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ + +/* Transmit Power flags available */ +#define IW_TXPOW_TYPE 0x00FF /* Type of value */ +#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ +#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ +#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ +#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ + +/* Retry limits and lifetime flags available */ +#define IW_RETRY_ON 0x0000 /* No details... */ +#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ +#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ +#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ +#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ +#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ +#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ +#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ +#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ +#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ + +/* Scanning request flags */ +#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ +#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ +#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ +#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ +#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ +#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ +#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ +#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ +#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ +/* struct iw_scan_req scan_type */ +#define IW_SCAN_TYPE_ACTIVE 0 +#define IW_SCAN_TYPE_PASSIVE 1 +/* Maximum size of returned data */ +#define IW_SCAN_MAX_DATA 4096 /* In bytes */ + +/* Scan capability flags - in (struct iw_range *)->scan_capa */ +#define IW_SCAN_CAPA_NONE 0x00 +#define IW_SCAN_CAPA_ESSID 0x01 +#define IW_SCAN_CAPA_BSSID 0x02 +#define IW_SCAN_CAPA_CHANNEL 0x04 +#define IW_SCAN_CAPA_MODE 0x08 +#define IW_SCAN_CAPA_RATE 0x10 +#define IW_SCAN_CAPA_TYPE 0x20 +#define IW_SCAN_CAPA_TIME 0x40 + +/* Max number of char in custom event - use multiple of them if needed */ +#define IW_CUSTOM_MAX 256 /* In bytes */ + +/* Generic information element */ +#define IW_GENERIC_IE_MAX 1024 + +/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ +#define IW_MLME_DEAUTH 0 +#define IW_MLME_DISASSOC 1 +#define IW_MLME_AUTH 2 +#define IW_MLME_ASSOC 3 + +/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ +#define IW_AUTH_INDEX 0x0FFF +#define IW_AUTH_FLAGS 0xF000 +/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) + * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the + * parameter that is being set/get to; value will be read/written to + * struct iw_param value field) */ +#define IW_AUTH_WPA_VERSION 0 +#define IW_AUTH_CIPHER_PAIRWISE 1 +#define IW_AUTH_CIPHER_GROUP 2 +#define IW_AUTH_KEY_MGMT 3 +#define IW_AUTH_TKIP_COUNTERMEASURES 4 +#define IW_AUTH_DROP_UNENCRYPTED 5 +#define IW_AUTH_80211_AUTH_ALG 6 +#define IW_AUTH_WPA_ENABLED 7 +#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 +#define IW_AUTH_ROAMING_CONTROL 9 +#define IW_AUTH_PRIVACY_INVOKED 10 +#define IW_AUTH_CIPHER_GROUP_MGMT 11 +#define IW_AUTH_MFP 12 + +/* IW_AUTH_WPA_VERSION values (bit field) */ +#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 +#define IW_AUTH_WPA_VERSION_WPA 0x00000002 +#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 + +/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT + * values (bit field) */ +#define IW_AUTH_CIPHER_NONE 0x00000001 +#define IW_AUTH_CIPHER_WEP40 0x00000002 +#define IW_AUTH_CIPHER_TKIP 0x00000004 +#define IW_AUTH_CIPHER_CCMP 0x00000008 +#define IW_AUTH_CIPHER_WEP104 0x00000010 +#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 + +/* IW_AUTH_KEY_MGMT values (bit field) */ +#define IW_AUTH_KEY_MGMT_802_1X 1 +#define IW_AUTH_KEY_MGMT_PSK 2 + +/* IW_AUTH_80211_AUTH_ALG values (bit field) */ +#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 +#define IW_AUTH_ALG_SHARED_KEY 0x00000002 +#define IW_AUTH_ALG_LEAP 0x00000004 + +/* IW_AUTH_ROAMING_CONTROL values */ +#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ +#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming + * control */ + +/* IW_AUTH_MFP (management frame protection) values */ +#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ +#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ +#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ + +/* SIOCSIWENCODEEXT definitions */ +#define IW_ENCODE_SEQ_MAX_SIZE 8 +/* struct iw_encode_ext ->alg */ +#define IW_ENCODE_ALG_NONE 0 +#define IW_ENCODE_ALG_WEP 1 +#define IW_ENCODE_ALG_TKIP 2 +#define IW_ENCODE_ALG_CCMP 3 +#define IW_ENCODE_ALG_PMK 4 +#define IW_ENCODE_ALG_AES_CMAC 5 +/* struct iw_encode_ext ->ext_flags */ +#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 +#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 +#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 +#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 + +/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ +#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ +#define IW_MICFAILURE_GROUP 0x00000004 +#define IW_MICFAILURE_PAIRWISE 0x00000008 +#define IW_MICFAILURE_STAKEY 0x00000010 +#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) + */ + +/* Bit field values for enc_capa in struct iw_range */ +#define IW_ENC_CAPA_WPA 0x00000001 +#define IW_ENC_CAPA_WPA2 0x00000002 +#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 +#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 +#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 + +/* Event capability macros - in (struct iw_range *)->event_capa + * Because we have more than 32 possible events, we use an array of + * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ +#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ + (cmd - SIOCIWFIRSTPRIV + 0x60) : \ + (cmd - SIOCIWFIRST)) +#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) +#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) +/* Event capability constants - event autogenerated by the kernel + * This list is valid for most 802.11 devices, customise as needed... */ +#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ + IW_EVENT_CAPA_MASK(0x8B06) | \ + IW_EVENT_CAPA_MASK(0x8B1A)) +#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) +/* "Easy" macro to set events in iw_range (less efficient) */ +#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) +#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } + + +/****************************** TYPES ******************************/ + +/* --------------------------- SUBTYPES --------------------------- */ +/* + * Generic format for most parameters that fit in an int + */ +struct iw_param +{ + __s32 value; /* The value of the parameter itself */ + __u8 fixed; /* Hardware should not use auto select */ + __u8 disabled; /* Disable the feature */ + __u16 flags; /* Various specifc flags (if any) */ +}; + +/* + * For all data larger than 16 octets, we need to use a + * pointer to memory allocated in user space. + */ +struct iw_point +{ + void __user *pointer; /* Pointer to the data (in user space) */ + __u16 length; /* number of fields or size in bytes */ + __u16 flags; /* Optional params */ +}; + +#ifdef __KERNEL__ +#ifdef CONFIG_COMPAT + +#include + +struct compat_iw_point { + compat_caddr_t pointer; + __u16 length; + __u16 flags; +}; +#endif +#endif + +/* + * A frequency + * For numbers lower than 10^9, we encode the number in 'm' and + * set 'e' to 0 + * For number greater than 10^9, we divide it by the lowest power + * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... + * The power of 10 is in 'e', the result of the division is in 'm'. + */ +struct iw_freq +{ + __s32 m; /* Mantissa */ + __s16 e; /* Exponent */ + __u8 i; /* List index (when in range struct) */ + __u8 flags; /* Flags (fixed/auto) */ +}; + +/* + * Quality of the link + */ +struct iw_quality +{ + __u8 qual; /* link quality (%retries, SNR, + %missed beacons or better...) */ + __u8 level; /* signal level (dBm) */ + __u8 noise; /* noise level (dBm) */ + __u8 updated; /* Flags to know if updated */ +}; + +/* + * Packet discarded in the wireless adapter due to + * "wireless" specific problems... + * Note : the list of counter and statistics in net_device_stats + * is already pretty exhaustive, and you should use that first. + * This is only additional stats... + */ +struct iw_discarded +{ + __u32 nwid; /* Rx : Wrong nwid/essid */ + __u32 code; /* Rx : Unable to code/decode (WEP) */ + __u32 fragment; /* Rx : Can't perform MAC reassembly */ + __u32 retries; /* Tx : Max MAC retries num reached */ + __u32 misc; /* Others cases */ +}; + +/* + * Packet/Time period missed in the wireless adapter due to + * "wireless" specific problems... + */ +struct iw_missed +{ + __u32 beacon; /* Missed beacons/superframe */ +}; + +/* + * Quality range (for spy threshold) + */ +struct iw_thrspy +{ + struct sockaddr addr; /* Source address (hw/mac) */ + struct iw_quality qual; /* Quality of the link */ + struct iw_quality low; /* Low threshold */ + struct iw_quality high; /* High threshold */ +}; + +/* + * Optional data for scan request + * + * Note: these optional parameters are controlling parameters for the + * scanning behavior, these do not apply to getting scan results + * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and + * provide a merged results with all BSSes even if the previous scan + * request limited scanning to a subset, e.g., by specifying an SSID. + * Especially, scan results are required to include an entry for the + * current BSS if the driver is in Managed mode and associated with an AP. + */ +struct iw_scan_req +{ + __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ + __u8 essid_len; + __u8 num_channels; /* num entries in channel_list; + * 0 = scan all allowed channels */ + __u8 flags; /* reserved as padding; use zero, this may + * be used in the future for adding flags + * to request different scan behavior */ + struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or + * individual address of a specific BSS */ + + /* + * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using + * the current ESSID. This allows scan requests for specific ESSID + * without having to change the current ESSID and potentially breaking + * the current association. + */ + __u8 essid[IW_ESSID_MAX_SIZE]; + + /* + * Optional parameters for changing the default scanning behavior. + * These are based on the MLME-SCAN.request from IEEE Std 802.11. + * TU is 1.024 ms. If these are set to 0, driver is expected to use + * reasonable default values. min_channel_time defines the time that + * will be used to wait for the first reply on each channel. If no + * replies are received, next channel will be scanned after this. If + * replies are received, total time waited on the channel is defined by + * max_channel_time. + */ + __u32 min_channel_time; /* in TU */ + __u32 max_channel_time; /* in TU */ + + struct iw_freq channel_list[IW_MAX_FREQUENCIES]; +}; + +/* ------------------------- WPA SUPPORT ------------------------- */ + +/* + * Extended data structure for get/set encoding (this is used with + * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* + * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and + * only the data contents changes (key data -> this structure, including + * key data). + * + * If the new key is the first group key, it will be set as the default + * TX key. Otherwise, default TX key index is only changed if + * IW_ENCODE_EXT_SET_TX_KEY flag is set. + * + * Key will be changed with SIOCSIWENCODEEXT in all cases except for + * special "change TX key index" operation which is indicated by setting + * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. + * + * tx_seq/rx_seq are only used when respective + * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal + * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start + * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally + * used only by an Authenticator (AP or an IBSS station) to get the + * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and + * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for + * debugging/testing. + */ +struct iw_encode_ext +{ + __u32 ext_flags; /* IW_ENCODE_EXT_* */ + __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ + struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast + * (group) keys or unicast address for + * individual keys */ + __u16 alg; /* IW_ENCODE_ALG_* */ + __u16 key_len; + __u8 key[0]; +}; + +/* SIOCSIWMLME data */ +struct iw_mlme +{ + __u16 cmd; /* IW_MLME_* */ + __u16 reason_code; + struct sockaddr addr; +}; + +/* SIOCSIWPMKSA data */ +#define IW_PMKSA_ADD 1 +#define IW_PMKSA_REMOVE 2 +#define IW_PMKSA_FLUSH 3 + +#define IW_PMKID_LEN 16 + +struct iw_pmksa +{ + __u32 cmd; /* IW_PMKSA_* */ + struct sockaddr bssid; + __u8 pmkid[IW_PMKID_LEN]; +}; + +/* IWEVMICHAELMICFAILURE data */ +struct iw_michaelmicfailure +{ + __u32 flags; + struct sockaddr src_addr; + __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ +}; + +/* IWEVPMKIDCAND data */ +#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ +struct iw_pmkid_cand +{ + __u32 flags; /* IW_PMKID_CAND_* */ + __u32 index; /* the smaller the index, the higher the + * priority */ + struct sockaddr bssid; +}; + +/* ------------------------ WIRELESS STATS ------------------------ */ +/* + * Wireless statistics (used for /proc/net/wireless) + */ +struct iw_statistics +{ + __u16 status; /* Status + * - device dependent for now */ + + struct iw_quality qual; /* Quality of the link + * (instant/mean/max) */ + struct iw_discarded discard; /* Packet discarded counts */ + struct iw_missed miss; /* Packet missed counts */ +}; + +/* ------------------------ IOCTL REQUEST ------------------------ */ +/* + * This structure defines the payload of an ioctl, and is used + * below. + * + * Note that this structure should fit on the memory footprint + * of iwreq (which is the same as ifreq), which mean a max size of + * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... + * You should check this when increasing the structures defined + * above in this file... + */ +union iwreq_data +{ + /* Config - generic */ + char name[IFNAMSIZ]; + /* Name : used to verify the presence of wireless extensions. + * Name of the protocol/provider... */ + + struct iw_point essid; /* Extended network name */ + struct iw_param nwid; /* network id (or domain - the cell) */ + struct iw_freq freq; /* frequency or channel : + * 0-1000 = channel + * > 1000 = frequency in Hz */ + + struct iw_param sens; /* signal level threshold */ + struct iw_param bitrate; /* default bit rate */ + struct iw_param txpower; /* default transmit power */ + struct iw_param rts; /* RTS threshold threshold */ + struct iw_param frag; /* Fragmentation threshold */ + __u32 mode; /* Operation mode */ + struct iw_param retry; /* Retry limits & lifetime */ + + struct iw_point encoding; /* Encoding stuff : tokens */ + struct iw_param power; /* PM duration/timeout */ + struct iw_quality qual; /* Quality part of statistics */ + + struct sockaddr ap_addr; /* Access point address */ + struct sockaddr addr; /* Destination address (hw/mac) */ + + struct iw_param param; /* Other small parameters */ + struct iw_point data; /* Other large parameters */ +}; + +/* + * The structure to exchange data for ioctl. + * This structure is the same as 'struct ifreq', but (re)defined for + * convenience... + * Do I need to remind you about structure size (32 octets) ? + */ +struct iwreq +{ + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ + } ifr_ifrn; + + /* Data part (defined just above) */ + union iwreq_data u; +}; + +/* -------------------------- IOCTL DATA -------------------------- */ +/* + * For those ioctl which want to exchange mode data that what could + * fit in the above structure... + */ + +/* + * Range of parameters + */ + +struct iw_range +{ + /* Informative stuff (to choose between different interface) */ + __u32 throughput; /* To give an idea... */ + /* In theory this value should be the maximum benchmarked + * TCP/IP throughput, because with most of these devices the + * bit rate is meaningless (overhead an co) to estimate how + * fast the connection will go and pick the fastest one. + * I suggest people to play with Netperf or any benchmark... + */ + + /* NWID (or domain id) */ + __u32 min_nwid; /* Minimal NWID we are able to set */ + __u32 max_nwid; /* Maximal NWID we are able to set */ + + /* Old Frequency (backward compat - moved lower ) */ + __u16 old_num_channels; + __u8 old_num_frequency; + + /* Scan capabilities */ + __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ + + /* Wireless event capability bitmasks */ + __u32 event_capa[6]; + + /* signal level threshold range */ + __s32 sensitivity; + + /* Quality of link & SNR stuff */ + /* Quality range (link, level, noise) + * If the quality is absolute, it will be in the range [0 ; max_qual], + * if the quality is dBm, it will be in the range [max_qual ; 0]. + * Don't forget that we use 8 bit arithmetics... */ + struct iw_quality max_qual; /* Quality of the link */ + /* This should contain the average/typical values of the quality + * indicator. This should be the threshold between a "good" and + * a "bad" link (example : monitor going from green to orange). + * Currently, user space apps like quality monitors don't have any + * way to calibrate the measurement. With this, they can split + * the range between 0 and max_qual in different quality level + * (using a geometric subdivision centered on the average). + * I expect that people doing the user space apps will feedback + * us on which value we need to put in each driver... */ + struct iw_quality avg_qual; /* Quality of the link */ + + /* Rates */ + __u8 num_bitrates; /* Number of entries in the list */ + __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ + + /* RTS threshold */ + __s32 min_rts; /* Minimal RTS threshold */ + __s32 max_rts; /* Maximal RTS threshold */ + + /* Frag threshold */ + __s32 min_frag; /* Minimal frag threshold */ + __s32 max_frag; /* Maximal frag threshold */ + + /* Power Management duration & timeout */ + __s32 min_pmp; /* Minimal PM period */ + __s32 max_pmp; /* Maximal PM period */ + __s32 min_pmt; /* Minimal PM timeout */ + __s32 max_pmt; /* Maximal PM timeout */ + __u16 pmp_flags; /* How to decode max/min PM period */ + __u16 pmt_flags; /* How to decode max/min PM timeout */ + __u16 pm_capa; /* What PM options are supported */ + + /* Encoder stuff */ + __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ + __u8 num_encoding_sizes; /* Number of entry in the list */ + __u8 max_encoding_tokens; /* Max number of tokens */ + /* For drivers that need a "login/passwd" form */ + __u8 encoding_login_index; /* token index for login token */ + + /* Transmit power */ + __u16 txpower_capa; /* What options are supported */ + __u8 num_txpower; /* Number of entries in the list */ + __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ + + /* Wireless Extension version info */ + __u8 we_version_compiled; /* Must be WIRELESS_EXT */ + __u8 we_version_source; /* Last update of source */ + + /* Retry limits and lifetime */ + __u16 retry_capa; /* What retry options are supported */ + __u16 retry_flags; /* How to decode max/min retry limit */ + __u16 r_time_flags; /* How to decode max/min retry life */ + __s32 min_retry; /* Minimal number of retries */ + __s32 max_retry; /* Maximal number of retries */ + __s32 min_r_time; /* Minimal retry lifetime */ + __s32 max_r_time; /* Maximal retry lifetime */ + + /* Frequency */ + __u16 num_channels; /* Number of channels [0; num - 1] */ + __u8 num_frequency; /* Number of entry in the list */ + struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ + /* Note : this frequency list doesn't need to fit channel numbers, + * because each entry contain its channel index */ + + __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ +}; + +/* + * Private ioctl interface information + */ + +struct iw_priv_args +{ + __u32 cmd; /* Number of the ioctl to issue */ + __u16 set_args; /* Type and number of args */ + __u16 get_args; /* Type and number of args */ + char name[IFNAMSIZ]; /* Name of the extension */ +}; + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* + * Wireless events are carried through the rtnetlink socket to user + * space. They are encapsulated in the IFLA_WIRELESS field of + * a RTM_NEWLINK message. + */ + +/* + * A Wireless Event. Contains basically the same data as the ioctl... + */ +struct iw_event +{ + __u16 len; /* Real length of this stuff */ + __u16 cmd; /* Wireless IOCTL */ + union iwreq_data u; /* IOCTL fixed payload */ +}; + +/* Size of the Event prefix (including padding and alignement junk) */ +#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) +/* Size of the various events */ +#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) +#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) +#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) + +/* iw_point events are special. First, the payload (extra data) come at + * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, + * we omit the pointer, so start at an offset. */ +#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ + (char *) NULL) +#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ + IW_EV_POINT_OFF) + +#ifdef __KERNEL__ +#ifdef CONFIG_COMPAT +struct __compat_iw_event { + __u16 len; /* Real length of this stuff */ + __u16 cmd; /* Wireless IOCTL */ + compat_caddr_t pointer; +}; +#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer) +#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length) + +/* Size of the various events for compat */ +#define IW_EV_COMPAT_CHAR_LEN (IW_EV_COMPAT_LCP_LEN + IFNAMSIZ) +#define IW_EV_COMPAT_UINT_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(__u32)) +#define IW_EV_COMPAT_FREQ_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_COMPAT_PARAM_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_COMPAT_ADDR_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_COMPAT_QUAL_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality)) +#define IW_EV_COMPAT_POINT_LEN \ + (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ + IW_EV_COMPAT_POINT_OFF) +#endif +#endif + +/* Size of the Event prefix when packed in stream */ +#define IW_EV_LCP_PK_LEN (4) +/* Size of the various events when packed in stream */ +#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) +#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) +#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) +#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) +#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) + +#endif /* _LINUX_WIRELESS_H */ diff --git a/include/compat/linux/wl12xx.h b/include/compat/linux/wl12xx.h new file mode 100755 index 0000000..4b69739 --- /dev/null +++ b/include/compat/linux/wl12xx.h @@ -0,0 +1,78 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef _LINUX_WL12XX_H +#define _LINUX_WL12XX_H + +/* Reference clock values */ +enum { + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */ + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */ + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */ +}; + +/* TCXO clock values */ +enum { + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */ + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */ + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */ + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */ + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */ + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */ + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */ + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */ +}; + +struct wl12xx_platform_data { + void (*set_power)(bool enable); + /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */ + int irq; + bool use_eeprom; + int board_ref_clock; + int board_tcxo_clock; + unsigned long platform_quirks; +}; + +/* Platform does not support level trigger interrupts */ +#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) + +#ifdef CONFIG_WL12XX_PLATFORM_DATA + +int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); + +#else + +static inline +int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) +{ + return -ENOSYS; +} + +#endif + +const struct wl12xx_platform_data *wl12xx_get_platform_data(void); + +#endif diff --git a/include/compat/net/bluetooth/bluetooth.h b/include/compat/net/bluetooth/bluetooth.h new file mode 100755 index 0000000..f045a32 --- /dev/null +++ b/include/compat/net/bluetooth/bluetooth.h @@ -0,0 +1,276 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + Copyright (C) 2000-2001 Qualcomm Incorporated + + Written 2000,2001 by Maxim Krasnyansky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __BLUETOOTH_H +#define __BLUETOOTH_H + +#include +#include +#include +#include +#include + +#ifndef AF_BLUETOOTH +#define AF_BLUETOOTH 31 +#define PF_BLUETOOTH AF_BLUETOOTH +#endif + +/* Reserv for core and drivers use */ +#define BT_SKB_RESERVE 8 + +#define BTPROTO_L2CAP 0 +#define BTPROTO_HCI 1 +#define BTPROTO_SCO 2 +#define BTPROTO_RFCOMM 3 +#define BTPROTO_BNEP 4 +#define BTPROTO_CMTP 5 +#define BTPROTO_HIDP 6 +#define BTPROTO_AVDTP 7 + +#define SOL_HCI 0 +#define SOL_L2CAP 6 +#define SOL_SCO 17 +#define SOL_RFCOMM 18 + +#define BT_SECURITY 4 +struct bt_security { + __u8 level; + __u8 key_size; +}; +#define BT_SECURITY_SDP 0 +#define BT_SECURITY_LOW 1 +#define BT_SECURITY_MEDIUM 2 +#define BT_SECURITY_HIGH 3 + +#define BT_DEFER_SETUP 7 + +#define BT_FLUSHABLE 8 + +#define BT_FLUSHABLE_OFF 0 +#define BT_FLUSHABLE_ON 1 + +#define BT_POWER 9 +struct bt_power { + __u8 force_active; +}; +#define BT_POWER_FORCE_ACTIVE_OFF 0 +#define BT_POWER_FORCE_ACTIVE_ON 1 + +#define BT_CHANNEL_POLICY 10 + +/* BR/EDR only (default policy) + * AMP controllers cannot be used. + * Channel move requests from the remote device are denied. + * If the L2CAP channel is currently using AMP, move the channel to BR/EDR. + */ +#define BT_CHANNEL_POLICY_BREDR_ONLY 0 + +/* BR/EDR Preferred + * Allow use of AMP controllers. + * If the L2CAP channel is currently on AMP, move it to BR/EDR. + * Channel move requests from the remote device are allowed. + */ +#define BT_CHANNEL_POLICY_BREDR_PREFERRED 1 + +/* AMP Preferred + * Allow use of AMP controllers + * If the L2CAP channel is currently on BR/EDR and AMP controller + * resources are available, initiate a channel move to AMP. + * Channel move requests from the remote device are allowed. + * If the L2CAP socket has not been connected yet, try to create + * and configure the channel directly on an AMP controller rather + * than BR/EDR. + */ +#define BT_CHANNEL_POLICY_AMP_PREFERRED 2 + +__printf(2, 3) +int bt_printk(const char *level, const char *fmt, ...); + +#define BT_INFO(fmt, arg...) bt_printk(KERN_INFO, pr_fmt(fmt), ##arg) +#define BT_ERR(fmt, arg...) bt_printk(KERN_ERR, pr_fmt(fmt), ##arg) +#define BT_DBG(fmt, arg...) pr_debug(fmt "\n", ##arg) + +/* Connection and socket states */ +enum { + BT_CONNECTED = 1, /* Equal to TCP_ESTABLISHED to make net code happy */ + BT_OPEN, + BT_BOUND, + BT_LISTEN, + BT_CONNECT, + BT_CONNECT2, + BT_CONFIG, + BT_DISCONN, + BT_CLOSED +}; + +/* BD Address */ +typedef struct { + __u8 b[6]; +} __packed bdaddr_t; + +#define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}}) +#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff}}) + +/* Copy, swap, convert BD Address */ +static inline int bacmp(bdaddr_t *ba1, bdaddr_t *ba2) +{ + return memcmp(ba1, ba2, sizeof(bdaddr_t)); +} +static inline void bacpy(bdaddr_t *dst, bdaddr_t *src) +{ + memcpy(dst, src, sizeof(bdaddr_t)); +} + +void baswap(bdaddr_t *dst, bdaddr_t *src); +char *batostr(bdaddr_t *ba); +bdaddr_t *strtoba(char *str); + +/* Common socket structures and functions */ + +#define bt_sk(__sk) ((struct bt_sock *) __sk) + +struct bt_sock { + struct sock sk; + bdaddr_t src; + bdaddr_t dst; + struct list_head accept_q; + struct sock *parent; + u32 defer_setup; +}; + +struct bt_sock_list { + struct hlist_head head; + rwlock_t lock; +}; + +int bt_sock_register(int proto, const struct net_proto_family *ops); +int bt_sock_unregister(int proto); +void bt_sock_link(struct bt_sock_list *l, struct sock *s); +void bt_sock_unlink(struct bt_sock_list *l, struct sock *s); +int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t len, int flags); +int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t len, int flags); +uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait); +int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); +int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo); + +void bt_accept_enqueue(struct sock *parent, struct sock *sk); +void bt_accept_unlink(struct sock *sk); +struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock); + +/* Skb helpers */ +struct bt_skb_cb { + __u8 pkt_type; + __u8 incoming; + __u16 expect; + __u16 tx_seq; + __u8 retries; + __u8 sar; + unsigned short channel; + __u8 force_active; +}; +#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb)) + +static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how) +{ + struct sk_buff *skb; + + if ((skb = alloc_skb(len + BT_SKB_RESERVE, how))) { + skb_reserve(skb, BT_SKB_RESERVE); + bt_cb(skb)->incoming = 0; + } + return skb; +} + +static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, + unsigned long len, int nb, int *err) +{ + struct sk_buff *skb; + + release_sock(sk); + if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) { + skb_reserve(skb, BT_SKB_RESERVE); + bt_cb(skb)->incoming = 0; + } + lock_sock(sk); + + if (!skb && *err) + return NULL; + + *err = sock_error(sk); + if (*err) + goto out; + + if (sk->sk_shutdown) { + *err = -ECONNRESET; + goto out; + } + + return skb; + +out: + kfree_skb(skb); + return NULL; +} + +int bt_to_errno(__u16 code); + +extern int hci_sock_init(void); +extern void hci_sock_cleanup(void); + +extern int bt_sysfs_init(void); +extern void bt_sysfs_cleanup(void); + +extern struct dentry *bt_debugfs; + +#ifdef CONFIG_COMPAT_BT_L2CAP +int l2cap_init(void); +void l2cap_exit(void); +#else +static inline int l2cap_init(void) +{ + return 0; +} + +static inline void l2cap_exit(void) +{ +} +#endif + +#ifdef CONFIG_COMPAT_BT_SCO +int sco_init(void); +void sco_exit(void); +#else +static inline int sco_init(void) +{ + return 0; +} + +static inline void sco_exit(void) +{ +} +#endif + +#endif /* __BLUETOOTH_H */ diff --git a/include/compat/net/bluetooth/hci.h b/include/compat/net/bluetooth/hci.h new file mode 100755 index 0000000..139ce2a --- /dev/null +++ b/include/compat/net/bluetooth/hci.h @@ -0,0 +1,1334 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + Copyright (C) 2000-2001 Qualcomm Incorporated + + Written 2000,2001 by Maxim Krasnyansky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __HCI_H +#define __HCI_H + +#define HCI_MAX_ACL_SIZE 1024 +#define HCI_MAX_SCO_SIZE 255 +#define HCI_MAX_EVENT_SIZE 260 +#define HCI_MAX_FRAME_SIZE (HCI_MAX_ACL_SIZE + 4) + +/* HCI dev events */ +#define HCI_DEV_REG 1 +#define HCI_DEV_UNREG 2 +#define HCI_DEV_UP 3 +#define HCI_DEV_DOWN 4 +#define HCI_DEV_SUSPEND 5 +#define HCI_DEV_RESUME 6 + +/* HCI notify events */ +#define HCI_NOTIFY_CONN_ADD 1 +#define HCI_NOTIFY_CONN_DEL 2 +#define HCI_NOTIFY_VOICE_SETTING 3 + +/* HCI bus types */ +#define HCI_VIRTUAL 0 +#define HCI_USB 1 +#define HCI_PCCARD 2 +#define HCI_UART 3 +#define HCI_RS232 4 +#define HCI_PCI 5 +#define HCI_SDIO 6 + +/* HCI controller types */ +#define HCI_BREDR 0x00 +#define HCI_AMP 0x01 + +/* HCI device quirks */ +enum { + HCI_QUIRK_NO_RESET, + HCI_QUIRK_RAW_DEVICE, + HCI_QUIRK_FIXUP_BUFFER_SIZE +}; + +/* HCI device flags */ +enum { + HCI_UP, + HCI_INIT, + HCI_RUNNING, + + HCI_PSCAN, + HCI_ISCAN, + HCI_AUTH, + HCI_ENCRYPT, + HCI_INQUIRY, + + HCI_RAW, + + HCI_SETUP, + HCI_AUTO_OFF, + HCI_MGMT, + HCI_PAIRABLE, + HCI_SERVICE_CACHE, + HCI_LINK_KEYS, + HCI_DEBUG_KEYS, + + HCI_RESET, +}; + +/* HCI ioctl defines */ +#define HCIDEVUP _IOW('H', 201, int) +#define HCIDEVDOWN _IOW('H', 202, int) +#define HCIDEVRESET _IOW('H', 203, int) +#define HCIDEVRESTAT _IOW('H', 204, int) + +#define HCIGETDEVLIST _IOR('H', 210, int) +#define HCIGETDEVINFO _IOR('H', 211, int) +#define HCIGETCONNLIST _IOR('H', 212, int) +#define HCIGETCONNINFO _IOR('H', 213, int) +#define HCIGETAUTHINFO _IOR('H', 215, int) + +#define HCISETRAW _IOW('H', 220, int) +#define HCISETSCAN _IOW('H', 221, int) +#define HCISETAUTH _IOW('H', 222, int) +#define HCISETENCRYPT _IOW('H', 223, int) +#define HCISETPTYPE _IOW('H', 224, int) +#define HCISETLINKPOL _IOW('H', 225, int) +#define HCISETLINKMODE _IOW('H', 226, int) +#define HCISETACLMTU _IOW('H', 227, int) +#define HCISETSCOMTU _IOW('H', 228, int) + +#define HCIBLOCKADDR _IOW('H', 230, int) +#define HCIUNBLOCKADDR _IOW('H', 231, int) + +#define HCIINQUIRY _IOR('H', 240, int) + +/* HCI timeouts */ +#define HCI_CONNECT_TIMEOUT (40000) /* 40 seconds */ +#define HCI_DISCONN_TIMEOUT (2000) /* 2 seconds */ +#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */ +#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */ +#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */ +#define HCI_CMD_TIMEOUT (1000) /* 1 seconds */ + +/* HCI data types */ +#define HCI_COMMAND_PKT 0x01 +#define HCI_ACLDATA_PKT 0x02 +#define HCI_SCODATA_PKT 0x03 +#define HCI_EVENT_PKT 0x04 +#define HCI_VENDOR_PKT 0xff + +/* HCI packet types */ +#define HCI_DM1 0x0008 +#define HCI_DM3 0x0400 +#define HCI_DM5 0x4000 +#define HCI_DH1 0x0010 +#define HCI_DH3 0x0800 +#define HCI_DH5 0x8000 + +#define HCI_HV1 0x0020 +#define HCI_HV2 0x0040 +#define HCI_HV3 0x0080 + +#define SCO_PTYPE_MASK (HCI_HV1 | HCI_HV2 | HCI_HV3) +#define ACL_PTYPE_MASK (~SCO_PTYPE_MASK) + +/* eSCO packet types */ +#define ESCO_HV1 0x0001 +#define ESCO_HV2 0x0002 +#define ESCO_HV3 0x0004 +#define ESCO_EV3 0x0008 +#define ESCO_EV4 0x0010 +#define ESCO_EV5 0x0020 +#define ESCO_2EV3 0x0040 +#define ESCO_3EV3 0x0080 +#define ESCO_2EV5 0x0100 +#define ESCO_3EV5 0x0200 + +#define SCO_ESCO_MASK (ESCO_HV1 | ESCO_HV2 | ESCO_HV3) +#define EDR_ESCO_MASK (ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5) + +/* ACL flags */ +#define ACL_START_NO_FLUSH 0x00 +#define ACL_CONT 0x01 +#define ACL_START 0x02 +#define ACL_ACTIVE_BCAST 0x04 +#define ACL_PICO_BCAST 0x08 + +/* Baseband links */ +#define SCO_LINK 0x00 +#define ACL_LINK 0x01 +#define ESCO_LINK 0x02 +/* Low Energy links do not have defined link type. Use invented one */ +#define LE_LINK 0x80 + +/* LMP features */ +#define LMP_3SLOT 0x01 +#define LMP_5SLOT 0x02 +#define LMP_ENCRYPT 0x04 +#define LMP_SOFFSET 0x08 +#define LMP_TACCURACY 0x10 +#define LMP_RSWITCH 0x20 +#define LMP_HOLD 0x40 +#define LMP_SNIFF 0x80 + +#define LMP_PARK 0x01 +#define LMP_RSSI 0x02 +#define LMP_QUALITY 0x04 +#define LMP_SCO 0x08 +#define LMP_HV2 0x10 +#define LMP_HV3 0x20 +#define LMP_ULAW 0x40 +#define LMP_ALAW 0x80 + +#define LMP_CVSD 0x01 +#define LMP_PSCHEME 0x02 +#define LMP_PCONTROL 0x04 + +#define LMP_RSSI_INQ 0x40 +#define LMP_ESCO 0x80 + +#define LMP_EV4 0x01 +#define LMP_EV5 0x02 +#define LMP_LE 0x40 + +#define LMP_SNIFF_SUBR 0x02 +#define LMP_PAUSE_ENC 0x04 +#define LMP_EDR_ESCO_2M 0x20 +#define LMP_EDR_ESCO_3M 0x40 +#define LMP_EDR_3S_ESCO 0x80 + +#define LMP_EXT_INQ 0x01 +#define LMP_SIMUL_LE_BR 0x02 +#define LMP_SIMPLE_PAIR 0x08 +#define LMP_NO_FLUSH 0x40 + +#define LMP_LSTO 0x01 +#define LMP_INQ_TX_PWR 0x02 +#define LMP_EXTFEATURES 0x80 + +/* Extended LMP features */ +#define LMP_HOST_LE 0x02 + +/* Connection modes */ +#define HCI_CM_ACTIVE 0x0000 +#define HCI_CM_HOLD 0x0001 +#define HCI_CM_SNIFF 0x0002 +#define HCI_CM_PARK 0x0003 + +/* Link policies */ +#define HCI_LP_RSWITCH 0x0001 +#define HCI_LP_HOLD 0x0002 +#define HCI_LP_SNIFF 0x0004 +#define HCI_LP_PARK 0x0008 + +/* Link modes */ +#define HCI_LM_ACCEPT 0x8000 +#define HCI_LM_MASTER 0x0001 +#define HCI_LM_AUTH 0x0002 +#define HCI_LM_ENCRYPT 0x0004 +#define HCI_LM_TRUSTED 0x0008 +#define HCI_LM_RELIABLE 0x0010 +#define HCI_LM_SECURE 0x0020 + +/* Authentication types */ +#define HCI_AT_NO_BONDING 0x00 +#define HCI_AT_NO_BONDING_MITM 0x01 +#define HCI_AT_DEDICATED_BONDING 0x02 +#define HCI_AT_DEDICATED_BONDING_MITM 0x03 +#define HCI_AT_GENERAL_BONDING 0x04 +#define HCI_AT_GENERAL_BONDING_MITM 0x05 + +/* Link Key types */ +#define HCI_LK_COMBINATION 0x00 +#define HCI_LK_LOCAL_UNIT 0x01 +#define HCI_LK_REMOTE_UNIT 0x02 +#define HCI_LK_DEBUG_COMBINATION 0x03 +#define HCI_LK_UNAUTH_COMBINATION 0x04 +#define HCI_LK_AUTH_COMBINATION 0x05 +#define HCI_LK_CHANGED_COMBINATION 0x06 +/* The spec doesn't define types for SMP keys */ +#define HCI_LK_SMP_LTK 0x81 +#define HCI_LK_SMP_IRK 0x82 +#define HCI_LK_SMP_CSRK 0x83 + +/* ---- HCI Error Codes ---- */ +#define HCI_ERROR_AUTH_FAILURE 0x05 +#define HCI_ERROR_REJ_BAD_ADDR 0x0f +#define HCI_ERROR_REMOTE_USER_TERM 0x13 +#define HCI_ERROR_LOCAL_HOST_TERM 0x16 +#define HCI_ERROR_PAIRING_NOT_ALLOWED 0x18 + +/* ----- HCI Commands ---- */ +#define HCI_OP_NOP 0x0000 + +#define HCI_OP_INQUIRY 0x0401 +struct hci_cp_inquiry { + __u8 lap[3]; + __u8 length; + __u8 num_rsp; +} __packed; + +#define HCI_OP_INQUIRY_CANCEL 0x0402 + +#define HCI_OP_EXIT_PERIODIC_INQ 0x0404 + +#define HCI_OP_CREATE_CONN 0x0405 +struct hci_cp_create_conn { + bdaddr_t bdaddr; + __le16 pkt_type; + __u8 pscan_rep_mode; + __u8 pscan_mode; + __le16 clock_offset; + __u8 role_switch; +} __packed; + +#define HCI_OP_DISCONNECT 0x0406 +struct hci_cp_disconnect { + __le16 handle; + __u8 reason; +} __packed; + +#define HCI_OP_ADD_SCO 0x0407 +struct hci_cp_add_sco { + __le16 handle; + __le16 pkt_type; +} __packed; + +#define HCI_OP_CREATE_CONN_CANCEL 0x0408 +struct hci_cp_create_conn_cancel { + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_ACCEPT_CONN_REQ 0x0409 +struct hci_cp_accept_conn_req { + bdaddr_t bdaddr; + __u8 role; +} __packed; + +#define HCI_OP_REJECT_CONN_REQ 0x040a +struct hci_cp_reject_conn_req { + bdaddr_t bdaddr; + __u8 reason; +} __packed; + +#define HCI_OP_LINK_KEY_REPLY 0x040b +struct hci_cp_link_key_reply { + bdaddr_t bdaddr; + __u8 link_key[16]; +} __packed; + +#define HCI_OP_LINK_KEY_NEG_REPLY 0x040c +struct hci_cp_link_key_neg_reply { + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_PIN_CODE_REPLY 0x040d +struct hci_cp_pin_code_reply { + bdaddr_t bdaddr; + __u8 pin_len; + __u8 pin_code[16]; +} __packed; +struct hci_rp_pin_code_reply { + __u8 status; + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_PIN_CODE_NEG_REPLY 0x040e +struct hci_cp_pin_code_neg_reply { + bdaddr_t bdaddr; +} __packed; +struct hci_rp_pin_code_neg_reply { + __u8 status; + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_CHANGE_CONN_PTYPE 0x040f +struct hci_cp_change_conn_ptype { + __le16 handle; + __le16 pkt_type; +} __packed; + +#define HCI_OP_AUTH_REQUESTED 0x0411 +struct hci_cp_auth_requested { + __le16 handle; +} __packed; + +#define HCI_OP_SET_CONN_ENCRYPT 0x0413 +struct hci_cp_set_conn_encrypt { + __le16 handle; + __u8 encrypt; +} __packed; + +#define HCI_OP_CHANGE_CONN_LINK_KEY 0x0415 +struct hci_cp_change_conn_link_key { + __le16 handle; +} __packed; + +#define HCI_OP_REMOTE_NAME_REQ 0x0419 +struct hci_cp_remote_name_req { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_mode; + __le16 clock_offset; +} __packed; + +#define HCI_OP_REMOTE_NAME_REQ_CANCEL 0x041a +struct hci_cp_remote_name_req_cancel { + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_READ_REMOTE_FEATURES 0x041b +struct hci_cp_read_remote_features { + __le16 handle; +} __packed; + +#define HCI_OP_READ_REMOTE_EXT_FEATURES 0x041c +struct hci_cp_read_remote_ext_features { + __le16 handle; + __u8 page; +} __packed; + +#define HCI_OP_READ_REMOTE_VERSION 0x041d +struct hci_cp_read_remote_version { + __le16 handle; +} __packed; + +#define HCI_OP_SETUP_SYNC_CONN 0x0428 +struct hci_cp_setup_sync_conn { + __le16 handle; + __le32 tx_bandwidth; + __le32 rx_bandwidth; + __le16 max_latency; + __le16 voice_setting; + __u8 retrans_effort; + __le16 pkt_type; +} __packed; + +#define HCI_OP_ACCEPT_SYNC_CONN_REQ 0x0429 +struct hci_cp_accept_sync_conn_req { + bdaddr_t bdaddr; + __le32 tx_bandwidth; + __le32 rx_bandwidth; + __le16 max_latency; + __le16 content_format; + __u8 retrans_effort; + __le16 pkt_type; +} __packed; + +#define HCI_OP_REJECT_SYNC_CONN_REQ 0x042a +struct hci_cp_reject_sync_conn_req { + bdaddr_t bdaddr; + __u8 reason; +} __packed; + +#define HCI_OP_IO_CAPABILITY_REPLY 0x042b +struct hci_cp_io_capability_reply { + bdaddr_t bdaddr; + __u8 capability; + __u8 oob_data; + __u8 authentication; +} __packed; + +#define HCI_OP_USER_CONFIRM_REPLY 0x042c +struct hci_cp_user_confirm_reply { + bdaddr_t bdaddr; +} __packed; +struct hci_rp_user_confirm_reply { + __u8 status; + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_USER_CONFIRM_NEG_REPLY 0x042d + +#define HCI_OP_REMOTE_OOB_DATA_REPLY 0x0430 +struct hci_cp_remote_oob_data_reply { + bdaddr_t bdaddr; + __u8 hash[16]; + __u8 randomizer[16]; +} __packed; + +#define HCI_OP_REMOTE_OOB_DATA_NEG_REPLY 0x0433 +struct hci_cp_remote_oob_data_neg_reply { + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_IO_CAPABILITY_NEG_REPLY 0x0434 +struct hci_cp_io_capability_neg_reply { + bdaddr_t bdaddr; + __u8 reason; +} __packed; + +#define HCI_OP_SNIFF_MODE 0x0803 +struct hci_cp_sniff_mode { + __le16 handle; + __le16 max_interval; + __le16 min_interval; + __le16 attempt; + __le16 timeout; +} __packed; + +#define HCI_OP_EXIT_SNIFF_MODE 0x0804 +struct hci_cp_exit_sniff_mode { + __le16 handle; +} __packed; + +#define HCI_OP_ROLE_DISCOVERY 0x0809 +struct hci_cp_role_discovery { + __le16 handle; +} __packed; +struct hci_rp_role_discovery { + __u8 status; + __le16 handle; + __u8 role; +} __packed; + +#define HCI_OP_SWITCH_ROLE 0x080b +struct hci_cp_switch_role { + bdaddr_t bdaddr; + __u8 role; +} __packed; + +#define HCI_OP_READ_LINK_POLICY 0x080c +struct hci_cp_read_link_policy { + __le16 handle; +} __packed; +struct hci_rp_read_link_policy { + __u8 status; + __le16 handle; + __le16 policy; +} __packed; + +#define HCI_OP_WRITE_LINK_POLICY 0x080d +struct hci_cp_write_link_policy { + __le16 handle; + __le16 policy; +} __packed; +struct hci_rp_write_link_policy { + __u8 status; + __le16 handle; +} __packed; + +#define HCI_OP_READ_DEF_LINK_POLICY 0x080e +struct hci_rp_read_def_link_policy { + __u8 status; + __le16 policy; +} __packed; + +#define HCI_OP_WRITE_DEF_LINK_POLICY 0x080f +struct hci_cp_write_def_link_policy { + __le16 policy; +} __packed; + +#define HCI_OP_SNIFF_SUBRATE 0x0811 +struct hci_cp_sniff_subrate { + __le16 handle; + __le16 max_latency; + __le16 min_remote_timeout; + __le16 min_local_timeout; +} __packed; + +#define HCI_OP_SET_EVENT_MASK 0x0c01 +struct hci_cp_set_event_mask { + __u8 mask[8]; +} __packed; + +#define HCI_OP_RESET 0x0c03 + +#define HCI_OP_SET_EVENT_FLT 0x0c05 +struct hci_cp_set_event_flt { + __u8 flt_type; + __u8 cond_type; + __u8 condition[0]; +} __packed; + +/* Filter types */ +#define HCI_FLT_CLEAR_ALL 0x00 +#define HCI_FLT_INQ_RESULT 0x01 +#define HCI_FLT_CONN_SETUP 0x02 + +/* CONN_SETUP Condition types */ +#define HCI_CONN_SETUP_ALLOW_ALL 0x00 +#define HCI_CONN_SETUP_ALLOW_CLASS 0x01 +#define HCI_CONN_SETUP_ALLOW_BDADDR 0x02 + +/* CONN_SETUP Conditions */ +#define HCI_CONN_SETUP_AUTO_OFF 0x01 +#define HCI_CONN_SETUP_AUTO_ON 0x02 + +#define HCI_OP_DELETE_STORED_LINK_KEY 0x0c12 +struct hci_cp_delete_stored_link_key { + bdaddr_t bdaddr; + __u8 delete_all; +} __packed; + +#define HCI_MAX_NAME_LENGTH 248 + +#define HCI_OP_WRITE_LOCAL_NAME 0x0c13 +struct hci_cp_write_local_name { + __u8 name[HCI_MAX_NAME_LENGTH]; +} __packed; + +#define HCI_OP_READ_LOCAL_NAME 0x0c14 +struct hci_rp_read_local_name { + __u8 status; + __u8 name[HCI_MAX_NAME_LENGTH]; +} __packed; + +#define HCI_OP_WRITE_CA_TIMEOUT 0x0c16 + +#define HCI_OP_WRITE_PG_TIMEOUT 0x0c18 + +#define HCI_OP_WRITE_SCAN_ENABLE 0x0c1a + #define SCAN_DISABLED 0x00 + #define SCAN_INQUIRY 0x01 + #define SCAN_PAGE 0x02 + +#define HCI_OP_READ_AUTH_ENABLE 0x0c1f + +#define HCI_OP_WRITE_AUTH_ENABLE 0x0c20 + #define AUTH_DISABLED 0x00 + #define AUTH_ENABLED 0x01 + +#define HCI_OP_READ_ENCRYPT_MODE 0x0c21 + +#define HCI_OP_WRITE_ENCRYPT_MODE 0x0c22 + #define ENCRYPT_DISABLED 0x00 + #define ENCRYPT_P2P 0x01 + #define ENCRYPT_BOTH 0x02 + +#define HCI_OP_READ_CLASS_OF_DEV 0x0c23 +struct hci_rp_read_class_of_dev { + __u8 status; + __u8 dev_class[3]; +} __packed; + +#define HCI_OP_WRITE_CLASS_OF_DEV 0x0c24 +struct hci_cp_write_class_of_dev { + __u8 dev_class[3]; +} __packed; + +#define HCI_OP_READ_VOICE_SETTING 0x0c25 +struct hci_rp_read_voice_setting { + __u8 status; + __le16 voice_setting; +} __packed; + +#define HCI_OP_WRITE_VOICE_SETTING 0x0c26 +struct hci_cp_write_voice_setting { + __le16 voice_setting; +} __packed; + +#define HCI_OP_HOST_BUFFER_SIZE 0x0c33 +struct hci_cp_host_buffer_size { + __le16 acl_mtu; + __u8 sco_mtu; + __le16 acl_max_pkt; + __le16 sco_max_pkt; +} __packed; + +#define HCI_OP_WRITE_INQUIRY_MODE 0x0c45 + +#define HCI_MAX_EIR_LENGTH 240 + +#define HCI_OP_WRITE_EIR 0x0c52 +struct hci_cp_write_eir { + uint8_t fec; + uint8_t data[HCI_MAX_EIR_LENGTH]; +} __packed; + +#define HCI_OP_READ_SSP_MODE 0x0c55 +struct hci_rp_read_ssp_mode { + __u8 status; + __u8 mode; +} __packed; + +#define HCI_OP_WRITE_SSP_MODE 0x0c56 +struct hci_cp_write_ssp_mode { + __u8 mode; +} __packed; + +#define HCI_OP_READ_LOCAL_OOB_DATA 0x0c57 +struct hci_rp_read_local_oob_data { + __u8 status; + __u8 hash[16]; + __u8 randomizer[16]; +} __packed; + +#define HCI_OP_READ_INQ_RSP_TX_POWER 0x0c58 + +#define HCI_OP_WRITE_LE_HOST_SUPPORTED 0x0c6d +struct hci_cp_write_le_host_supported { + __u8 le; + __u8 simul; +} __packed; + +#define HCI_OP_READ_LOCAL_VERSION 0x1001 +struct hci_rp_read_local_version { + __u8 status; + __u8 hci_ver; + __le16 hci_rev; + __u8 lmp_ver; + __le16 manufacturer; + __le16 lmp_subver; +} __packed; + +#define HCI_OP_READ_LOCAL_COMMANDS 0x1002 +struct hci_rp_read_local_commands { + __u8 status; + __u8 commands[64]; +} __packed; + +#define HCI_OP_READ_LOCAL_FEATURES 0x1003 +struct hci_rp_read_local_features { + __u8 status; + __u8 features[8]; +} __packed; + +#define HCI_OP_READ_LOCAL_EXT_FEATURES 0x1004 +struct hci_cp_read_local_ext_features { + __u8 page; +} __packed; +struct hci_rp_read_local_ext_features { + __u8 status; + __u8 page; + __u8 max_page; + __u8 features[8]; +} __packed; + +#define HCI_OP_READ_BUFFER_SIZE 0x1005 +struct hci_rp_read_buffer_size { + __u8 status; + __le16 acl_mtu; + __u8 sco_mtu; + __le16 acl_max_pkt; + __le16 sco_max_pkt; +} __packed; + +#define HCI_OP_READ_BD_ADDR 0x1009 +struct hci_rp_read_bd_addr { + __u8 status; + bdaddr_t bdaddr; +} __packed; + +#define HCI_OP_WRITE_PAGE_SCAN_ACTIVITY 0x0c1c +struct hci_cp_write_page_scan_activity { + __le16 interval; + __le16 window; +} __packed; + +#define HCI_OP_WRITE_PAGE_SCAN_TYPE 0x0c47 + #define PAGE_SCAN_TYPE_STANDARD 0x00 + #define PAGE_SCAN_TYPE_INTERLACED 0x01 + +#define HCI_OP_READ_LOCAL_AMP_INFO 0x1409 +struct hci_rp_read_local_amp_info { + __u8 status; + __u8 amp_status; + __le32 total_bw; + __le32 max_bw; + __le32 min_latency; + __le32 max_pdu; + __u8 amp_type; + __le16 pal_cap; + __le16 max_assoc_size; + __le32 max_flush_to; + __le32 be_flush_to; +} __packed; + +#define HCI_OP_LE_SET_EVENT_MASK 0x2001 +struct hci_cp_le_set_event_mask { + __u8 mask[8]; +} __packed; + +#define HCI_OP_LE_READ_BUFFER_SIZE 0x2002 +struct hci_rp_le_read_buffer_size { + __u8 status; + __le16 le_mtu; + __u8 le_max_pkt; +} __packed; + +#define HCI_OP_LE_SET_SCAN_ENABLE 0x200c +struct hci_cp_le_set_scan_enable { + __u8 enable; + __u8 filter_dup; +} __packed; + +#define HCI_OP_LE_CREATE_CONN 0x200d +struct hci_cp_le_create_conn { + __le16 scan_interval; + __le16 scan_window; + __u8 filter_policy; + __u8 peer_addr_type; + bdaddr_t peer_addr; + __u8 own_address_type; + __le16 conn_interval_min; + __le16 conn_interval_max; + __le16 conn_latency; + __le16 supervision_timeout; + __le16 min_ce_len; + __le16 max_ce_len; +} __packed; + +#define HCI_OP_LE_CREATE_CONN_CANCEL 0x200e + +#define HCI_OP_LE_CONN_UPDATE 0x2013 +struct hci_cp_le_conn_update { + __le16 handle; + __le16 conn_interval_min; + __le16 conn_interval_max; + __le16 conn_latency; + __le16 supervision_timeout; + __le16 min_ce_len; + __le16 max_ce_len; +} __packed; + +#define HCI_OP_LE_START_ENC 0x2019 +struct hci_cp_le_start_enc { + __le16 handle; + __u8 rand[8]; + __le16 ediv; + __u8 ltk[16]; +} __packed; + +#define HCI_OP_LE_LTK_REPLY 0x201a +struct hci_cp_le_ltk_reply { + __le16 handle; + __u8 ltk[16]; +} __packed; +struct hci_rp_le_ltk_reply { + __u8 status; + __le16 handle; +} __packed; + +#define HCI_OP_LE_LTK_NEG_REPLY 0x201b +struct hci_cp_le_ltk_neg_reply { + __le16 handle; +} __packed; +struct hci_rp_le_ltk_neg_reply { + __u8 status; + __le16 handle; +} __packed; + +/* ---- HCI Events ---- */ +#define HCI_EV_INQUIRY_COMPLETE 0x01 + +#define HCI_EV_INQUIRY_RESULT 0x02 +struct inquiry_info { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_period_mode; + __u8 pscan_mode; + __u8 dev_class[3]; + __le16 clock_offset; +} __packed; + +#define HCI_EV_CONN_COMPLETE 0x03 +struct hci_ev_conn_complete { + __u8 status; + __le16 handle; + bdaddr_t bdaddr; + __u8 link_type; + __u8 encr_mode; +} __packed; + +#define HCI_EV_CONN_REQUEST 0x04 +struct hci_ev_conn_request { + bdaddr_t bdaddr; + __u8 dev_class[3]; + __u8 link_type; +} __packed; + +#define HCI_EV_DISCONN_COMPLETE 0x05 +struct hci_ev_disconn_complete { + __u8 status; + __le16 handle; + __u8 reason; +} __packed; + +#define HCI_EV_AUTH_COMPLETE 0x06 +struct hci_ev_auth_complete { + __u8 status; + __le16 handle; +} __packed; + +#define HCI_EV_REMOTE_NAME 0x07 +struct hci_ev_remote_name { + __u8 status; + bdaddr_t bdaddr; + __u8 name[HCI_MAX_NAME_LENGTH]; +} __packed; + +#define HCI_EV_ENCRYPT_CHANGE 0x08 +struct hci_ev_encrypt_change { + __u8 status; + __le16 handle; + __u8 encrypt; +} __packed; + +#define HCI_EV_CHANGE_LINK_KEY_COMPLETE 0x09 +struct hci_ev_change_link_key_complete { + __u8 status; + __le16 handle; +} __packed; + +#define HCI_EV_REMOTE_FEATURES 0x0b +struct hci_ev_remote_features { + __u8 status; + __le16 handle; + __u8 features[8]; +} __packed; + +#define HCI_EV_REMOTE_VERSION 0x0c +struct hci_ev_remote_version { + __u8 status; + __le16 handle; + __u8 lmp_ver; + __le16 manufacturer; + __le16 lmp_subver; +} __packed; + +#define HCI_EV_QOS_SETUP_COMPLETE 0x0d +struct hci_qos { + __u8 service_type; + __u32 token_rate; + __u32 peak_bandwidth; + __u32 latency; + __u32 delay_variation; +} __packed; +struct hci_ev_qos_setup_complete { + __u8 status; + __le16 handle; + struct hci_qos qos; +} __packed; + +#define HCI_EV_CMD_COMPLETE 0x0e +struct hci_ev_cmd_complete { + __u8 ncmd; + __le16 opcode; +} __packed; + +#define HCI_EV_CMD_STATUS 0x0f +struct hci_ev_cmd_status { + __u8 status; + __u8 ncmd; + __le16 opcode; +} __packed; + +#define HCI_EV_ROLE_CHANGE 0x12 +struct hci_ev_role_change { + __u8 status; + bdaddr_t bdaddr; + __u8 role; +} __packed; + +#define HCI_EV_NUM_COMP_PKTS 0x13 +struct hci_ev_num_comp_pkts { + __u8 num_hndl; + /* variable length part */ +} __packed; + +#define HCI_EV_MODE_CHANGE 0x14 +struct hci_ev_mode_change { + __u8 status; + __le16 handle; + __u8 mode; + __le16 interval; +} __packed; + +#define HCI_EV_PIN_CODE_REQ 0x16 +struct hci_ev_pin_code_req { + bdaddr_t bdaddr; +} __packed; + +#define HCI_EV_LINK_KEY_REQ 0x17 +struct hci_ev_link_key_req { + bdaddr_t bdaddr; +} __packed; + +#define HCI_EV_LINK_KEY_NOTIFY 0x18 +struct hci_ev_link_key_notify { + bdaddr_t bdaddr; + __u8 link_key[16]; + __u8 key_type; +} __packed; + +#define HCI_EV_CLOCK_OFFSET 0x1c +struct hci_ev_clock_offset { + __u8 status; + __le16 handle; + __le16 clock_offset; +} __packed; + +#define HCI_EV_PKT_TYPE_CHANGE 0x1d +struct hci_ev_pkt_type_change { + __u8 status; + __le16 handle; + __le16 pkt_type; +} __packed; + +#define HCI_EV_PSCAN_REP_MODE 0x20 +struct hci_ev_pscan_rep_mode { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; +} __packed; + +#define HCI_EV_INQUIRY_RESULT_WITH_RSSI 0x22 +struct inquiry_info_with_rssi { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_period_mode; + __u8 dev_class[3]; + __le16 clock_offset; + __s8 rssi; +} __packed; +struct inquiry_info_with_rssi_and_pscan_mode { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_period_mode; + __u8 pscan_mode; + __u8 dev_class[3]; + __le16 clock_offset; + __s8 rssi; +} __packed; + +#define HCI_EV_REMOTE_EXT_FEATURES 0x23 +struct hci_ev_remote_ext_features { + __u8 status; + __le16 handle; + __u8 page; + __u8 max_page; + __u8 features[8]; +} __packed; + +#define HCI_EV_SYNC_CONN_COMPLETE 0x2c +struct hci_ev_sync_conn_complete { + __u8 status; + __le16 handle; + bdaddr_t bdaddr; + __u8 link_type; + __u8 tx_interval; + __u8 retrans_window; + __le16 rx_pkt_len; + __le16 tx_pkt_len; + __u8 air_mode; +} __packed; + +#define HCI_EV_SYNC_CONN_CHANGED 0x2d +struct hci_ev_sync_conn_changed { + __u8 status; + __le16 handle; + __u8 tx_interval; + __u8 retrans_window; + __le16 rx_pkt_len; + __le16 tx_pkt_len; +} __packed; + +#define HCI_EV_SNIFF_SUBRATE 0x2e +struct hci_ev_sniff_subrate { + __u8 status; + __le16 handle; + __le16 max_tx_latency; + __le16 max_rx_latency; + __le16 max_remote_timeout; + __le16 max_local_timeout; +} __packed; + +#define HCI_EV_EXTENDED_INQUIRY_RESULT 0x2f +struct extended_inquiry_info { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_period_mode; + __u8 dev_class[3]; + __le16 clock_offset; + __s8 rssi; + __u8 data[240]; +} __packed; + +#define HCI_EV_IO_CAPA_REQUEST 0x31 +struct hci_ev_io_capa_request { + bdaddr_t bdaddr; +} __packed; + +#define HCI_EV_IO_CAPA_REPLY 0x32 +struct hci_ev_io_capa_reply { + bdaddr_t bdaddr; + __u8 capability; + __u8 oob_data; + __u8 authentication; +} __packed; + +#define HCI_EV_USER_CONFIRM_REQUEST 0x33 +struct hci_ev_user_confirm_req { + bdaddr_t bdaddr; + __le32 passkey; +} __packed; + +#define HCI_EV_REMOTE_OOB_DATA_REQUEST 0x35 +struct hci_ev_remote_oob_data_request { + bdaddr_t bdaddr; +} __packed; + +#define HCI_EV_SIMPLE_PAIR_COMPLETE 0x36 +struct hci_ev_simple_pair_complete { + __u8 status; + bdaddr_t bdaddr; +} __packed; + +#define HCI_EV_REMOTE_HOST_FEATURES 0x3d +struct hci_ev_remote_host_features { + bdaddr_t bdaddr; + __u8 features[8]; +} __packed; + +#define HCI_EV_LE_META 0x3e +struct hci_ev_le_meta { + __u8 subevent; +} __packed; + +/* Low energy meta events */ +#define HCI_EV_LE_CONN_COMPLETE 0x01 +struct hci_ev_le_conn_complete { + __u8 status; + __le16 handle; + __u8 role; + __u8 bdaddr_type; + bdaddr_t bdaddr; + __le16 interval; + __le16 latency; + __le16 supervision_timeout; + __u8 clk_accurancy; +} __packed; + +#define HCI_EV_LE_LTK_REQ 0x05 +struct hci_ev_le_ltk_req { + __le16 handle; + __u8 random[8]; + __le16 ediv; +} __packed; + +/* Advertising report event types */ +#define ADV_IND 0x00 +#define ADV_DIRECT_IND 0x01 +#define ADV_SCAN_IND 0x02 +#define ADV_NONCONN_IND 0x03 +#define ADV_SCAN_RSP 0x04 + +#define ADDR_LE_DEV_PUBLIC 0x00 +#define ADDR_LE_DEV_RANDOM 0x01 + +#define HCI_EV_LE_ADVERTISING_REPORT 0x02 +struct hci_ev_le_advertising_info { + __u8 evt_type; + __u8 bdaddr_type; + bdaddr_t bdaddr; + __u8 length; + __u8 data[0]; +} __packed; + +/* Internal events generated by Bluetooth stack */ +#define HCI_EV_STACK_INTERNAL 0xfd +struct hci_ev_stack_internal { + __u16 type; + __u8 data[0]; +} __packed; + +#define HCI_EV_SI_DEVICE 0x01 +struct hci_ev_si_device { + __u16 event; + __u16 dev_id; +} __packed; + +#define HCI_EV_SI_SECURITY 0x02 +struct hci_ev_si_security { + __u16 event; + __u16 proto; + __u16 subproto; + __u8 incoming; +} __packed; + +/* ---- HCI Packet structures ---- */ +#define HCI_COMMAND_HDR_SIZE 3 +#define HCI_EVENT_HDR_SIZE 2 +#define HCI_ACL_HDR_SIZE 4 +#define HCI_SCO_HDR_SIZE 3 + +struct hci_command_hdr { + __le16 opcode; /* OCF & OGF */ + __u8 plen; +} __packed; + +struct hci_event_hdr { + __u8 evt; + __u8 plen; +} __packed; + +struct hci_acl_hdr { + __le16 handle; /* Handle & Flags(PB, BC) */ + __le16 dlen; +} __packed; + +struct hci_sco_hdr { + __le16 handle; + __u8 dlen; +} __packed; + +#include +static inline struct hci_event_hdr *hci_event_hdr(const struct sk_buff *skb) +{ + return (struct hci_event_hdr *) skb->data; +} + +static inline struct hci_acl_hdr *hci_acl_hdr(const struct sk_buff *skb) +{ + return (struct hci_acl_hdr *) skb->data; +} + +static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb) +{ + return (struct hci_sco_hdr *) skb->data; +} + +/* Command opcode pack/unpack */ +#define hci_opcode_pack(ogf, ocf) (__u16) ((ocf & 0x03ff)|(ogf << 10)) +#define hci_opcode_ogf(op) (op >> 10) +#define hci_opcode_ocf(op) (op & 0x03ff) + +/* ACL handle and flags pack/unpack */ +#define hci_handle_pack(h, f) (__u16) ((h & 0x0fff)|(f << 12)) +#define hci_handle(h) (h & 0x0fff) +#define hci_flags(h) (h >> 12) + +/* ---- HCI Sockets ---- */ + +/* Socket options */ +#define HCI_DATA_DIR 1 +#define HCI_FILTER 2 +#define HCI_TIME_STAMP 3 + +/* CMSG flags */ +#define HCI_CMSG_DIR 0x0001 +#define HCI_CMSG_TSTAMP 0x0002 + +struct sockaddr_hci { + sa_family_t hci_family; + unsigned short hci_dev; + unsigned short hci_channel; +}; +#define HCI_DEV_NONE 0xffff + +#define HCI_CHANNEL_RAW 0 +#define HCI_CHANNEL_CONTROL 1 + +struct hci_filter { + unsigned long type_mask; + unsigned long event_mask[2]; + __le16 opcode; +}; + +struct hci_ufilter { + __u32 type_mask; + __u32 event_mask[2]; + __le16 opcode; +}; + +#define HCI_FLT_TYPE_BITS 31 +#define HCI_FLT_EVENT_BITS 63 +#define HCI_FLT_OGF_BITS 63 +#define HCI_FLT_OCF_BITS 127 + +/* ---- HCI Ioctl requests structures ---- */ +struct hci_dev_stats { + __u32 err_rx; + __u32 err_tx; + __u32 cmd_tx; + __u32 evt_rx; + __u32 acl_tx; + __u32 acl_rx; + __u32 sco_tx; + __u32 sco_rx; + __u32 byte_rx; + __u32 byte_tx; +}; + +struct hci_dev_info { + __u16 dev_id; + char name[8]; + + bdaddr_t bdaddr; + + __u32 flags; + __u8 type; + + __u8 features[8]; + + __u32 pkt_type; + __u32 link_policy; + __u32 link_mode; + + __u16 acl_mtu; + __u16 acl_pkts; + __u16 sco_mtu; + __u16 sco_pkts; + + struct hci_dev_stats stat; +}; + +struct hci_conn_info { + __u16 handle; + bdaddr_t bdaddr; + __u8 type; + __u8 out; + __u16 state; + __u32 link_mode; +}; + +struct hci_dev_req { + __u16 dev_id; + __u32 dev_opt; +}; + +struct hci_dev_list_req { + __u16 dev_num; + struct hci_dev_req dev_req[0]; /* hci_dev_req structures */ +}; + +struct hci_conn_list_req { + __u16 dev_id; + __u16 conn_num; + struct hci_conn_info conn_info[0]; +}; + +struct hci_conn_info_req { + bdaddr_t bdaddr; + __u8 type; + struct hci_conn_info conn_info[0]; +}; + +struct hci_auth_info_req { + bdaddr_t bdaddr; + __u8 type; +}; + +struct hci_inquiry_req { + __u16 dev_id; + __u16 flags; + __u8 lap[3]; + __u8 length; + __u8 num_rsp; +}; +#define IREQ_CACHE_FLUSH 0x0001 + +#endif /* __HCI_H */ diff --git a/include/compat/net/bluetooth/hci_core.h b/include/compat/net/bluetooth/hci_core.h new file mode 100755 index 0000000..f333e76 --- /dev/null +++ b/include/compat/net/bluetooth/hci_core.h @@ -0,0 +1,988 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved. + + Written 2000,2001 by Maxim Krasnyansky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __HCI_CORE_H +#define __HCI_CORE_H + +#include +#include + +/* HCI upper protocols */ +#define HCI_PROTO_L2CAP 0 +#define HCI_PROTO_SCO 1 + +/* HCI priority */ +#define HCI_PRIO_MAX 7 + +/* HCI Core structures */ +struct inquiry_data { + bdaddr_t bdaddr; + __u8 pscan_rep_mode; + __u8 pscan_period_mode; + __u8 pscan_mode; + __u8 dev_class[3]; + __le16 clock_offset; + __s8 rssi; + __u8 ssp_mode; +}; + +struct inquiry_entry { + struct inquiry_entry *next; + __u32 timestamp; + struct inquiry_data data; +}; + +struct inquiry_cache { + spinlock_t lock; + __u32 timestamp; + struct inquiry_entry *list; +}; + +struct hci_conn_hash { + struct list_head list; + spinlock_t lock; + unsigned int acl_num; + unsigned int sco_num; + unsigned int le_num; +}; + +struct hci_chan_hash { + struct list_head list; + spinlock_t lock; + unsigned int num; +}; + +struct bdaddr_list { + struct list_head list; + bdaddr_t bdaddr; +}; + +struct bt_uuid { + struct list_head list; + u8 uuid[16]; + u8 svc_hint; +}; + +struct key_master_id { + __le16 ediv; + u8 rand[8]; +} __packed; + +struct link_key_data { + bdaddr_t bdaddr; + u8 type; + u8 val[16]; + u8 pin_len; + u8 dlen; + u8 data[0]; +} __packed; + +struct link_key { + struct list_head list; + bdaddr_t bdaddr; + u8 type; + u8 val[16]; + u8 pin_len; + u8 dlen; + u8 data[0]; +}; + +struct oob_data { + struct list_head list; + bdaddr_t bdaddr; + u8 hash[16]; + u8 randomizer[16]; +}; + +struct adv_entry { + struct list_head list; + bdaddr_t bdaddr; + u8 bdaddr_type; +}; + +#define NUM_REASSEMBLY 4 +struct hci_dev { + struct list_head list; + spinlock_t lock; + atomic_t refcnt; + + char name[8]; + unsigned long flags; + __u16 id; + __u8 bus; + __u8 dev_type; + bdaddr_t bdaddr; + __u8 dev_name[HCI_MAX_NAME_LENGTH]; + __u8 eir[HCI_MAX_EIR_LENGTH]; + __u8 dev_class[3]; + __u8 major_class; + __u8 minor_class; + __u8 features[8]; + __u8 extfeatures[8]; + __u8 commands[64]; + __u8 ssp_mode; + __u8 hci_ver; + __u16 hci_rev; + __u8 lmp_ver; + __u16 manufacturer; + __le16 lmp_subver; + __u16 voice_setting; + __u8 io_capability; + + __u16 pkt_type; + __u16 esco_type; + __u16 link_policy; + __u16 link_mode; + + __u32 idle_timeout; + __u16 sniff_min_interval; + __u16 sniff_max_interval; + + __u8 amp_status; + __u32 amp_total_bw; + __u32 amp_max_bw; + __u32 amp_min_latency; + __u32 amp_max_pdu; + __u8 amp_type; + __u16 amp_pal_cap; + __u16 amp_assoc_size; + __u32 amp_max_flush_to; + __u32 amp_be_flush_to; + + unsigned int auto_accept_delay; + + unsigned long quirks; + + atomic_t cmd_cnt; + unsigned int acl_cnt; + unsigned int sco_cnt; + unsigned int le_cnt; + + unsigned int acl_mtu; + unsigned int sco_mtu; + unsigned int le_mtu; + unsigned int acl_pkts; + unsigned int sco_pkts; + unsigned int le_pkts; + + unsigned long acl_last_tx; + unsigned long sco_last_tx; + unsigned long le_last_tx; + + struct workqueue_struct *workqueue; + + struct work_struct power_on; + struct delayed_work power_off; + + __u16 discov_timeout; + struct delayed_work discov_off; + + struct timer_list cmd_timer; + struct tasklet_struct cmd_task; + struct tasklet_struct rx_task; + struct tasklet_struct tx_task; + + struct sk_buff_head rx_q; + struct sk_buff_head raw_q; + struct sk_buff_head cmd_q; + + struct sk_buff *sent_cmd; + struct sk_buff *reassembly[NUM_REASSEMBLY]; + + struct mutex req_lock; + wait_queue_head_t req_wait_q; + __u32 req_status; + __u32 req_result; + + __u16 init_last_cmd; + + struct list_head mgmt_pending; + + struct inquiry_cache inq_cache; + struct hci_conn_hash conn_hash; + struct list_head blacklist; + + struct list_head uuids; + + struct list_head link_keys; + + struct list_head remote_oob_data; + + struct list_head adv_entries; + struct timer_list adv_timer; + + struct hci_dev_stats stat; + + struct sk_buff_head driver_init; + + void *driver_data; + void *core_data; + + atomic_t promisc; + + struct dentry *debugfs; + + struct device *parent; + struct device dev; + + struct rfkill *rfkill; + + struct module *owner; + + int (*open)(struct hci_dev *hdev); + int (*close)(struct hci_dev *hdev); + int (*flush)(struct hci_dev *hdev); + int (*send)(struct sk_buff *skb); + void (*destruct)(struct hci_dev *hdev); + void (*notify)(struct hci_dev *hdev, unsigned int evt); + int (*ioctl)(struct hci_dev *hdev, unsigned int cmd, unsigned long arg); +}; + +struct hci_conn { + struct list_head list; + + atomic_t refcnt; + + bdaddr_t dst; + __u8 dst_type; + __u16 handle; + __u16 state; + __u8 mode; + __u8 type; + __u8 out; + __u8 attempt; + __u8 dev_class[3]; + __u8 features[8]; + __u8 ssp_mode; + __u16 interval; + __u16 pkt_type; + __u16 link_policy; + __u32 link_mode; + __u8 key_type; + __u8 auth_type; + __u8 sec_level; + __u8 pending_sec_level; + __u8 pin_length; + __u8 enc_key_size; + __u8 io_capability; + __u8 power_save; + __u16 disc_timeout; + unsigned long pend; + + __u8 remote_cap; + __u8 remote_oob; + __u8 remote_auth; + + unsigned int sent; + + struct sk_buff_head data_q; + struct hci_chan_hash chan_hash; + + struct timer_list disc_timer; + struct timer_list idle_timer; + struct timer_list auto_accept_timer; + + struct work_struct work_add; + struct work_struct work_del; + + struct device dev; + atomic_t devref; + + struct hci_dev *hdev; + void *l2cap_data; + void *sco_data; + + struct hci_conn *link; + + void (*connect_cfm_cb) (struct hci_conn *conn, u8 status); + void (*security_cfm_cb) (struct hci_conn *conn, u8 status); + void (*disconn_cfm_cb) (struct hci_conn *conn, u8 reason); +}; + +struct hci_chan { + struct list_head list; + + struct hci_conn *conn; + struct sk_buff_head data_q; + unsigned int sent; +}; + +extern struct hci_proto *hci_proto[]; +extern struct list_head hci_dev_list; +extern struct list_head hci_cb_list; +extern rwlock_t hci_dev_list_lock; +extern rwlock_t hci_cb_list_lock; + +/* ----- Inquiry cache ----- */ +#define INQUIRY_CACHE_AGE_MAX (HZ*30) /* 30 seconds */ +#define INQUIRY_ENTRY_AGE_MAX (HZ*60) /* 60 seconds */ + +#define inquiry_cache_lock(c) spin_lock(&c->lock) +#define inquiry_cache_unlock(c) spin_unlock(&c->lock) +#define inquiry_cache_lock_bh(c) spin_lock_bh(&c->lock) +#define inquiry_cache_unlock_bh(c) spin_unlock_bh(&c->lock) + +static inline void inquiry_cache_init(struct hci_dev *hdev) +{ + struct inquiry_cache *c = &hdev->inq_cache; + spin_lock_init(&c->lock); + c->list = NULL; +} + +static inline int inquiry_cache_empty(struct hci_dev *hdev) +{ + struct inquiry_cache *c = &hdev->inq_cache; + return c->list == NULL; +} + +static inline long inquiry_cache_age(struct hci_dev *hdev) +{ + struct inquiry_cache *c = &hdev->inq_cache; + return jiffies - c->timestamp; +} + +static inline long inquiry_entry_age(struct inquiry_entry *e) +{ + return jiffies - e->timestamp; +} + +struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev, + bdaddr_t *bdaddr); +void hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data); + +/* ----- HCI Connections ----- */ +enum { + HCI_CONN_AUTH_PEND, + HCI_CONN_REAUTH_PEND, + HCI_CONN_ENCRYPT_PEND, + HCI_CONN_RSWITCH_PEND, + HCI_CONN_MODE_CHANGE_PEND, + HCI_CONN_SCO_SETUP_PEND, + HCI_CONN_LE_SMP_PEND, +}; + +static inline void hci_conn_hash_init(struct hci_dev *hdev) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + INIT_LIST_HEAD(&h->list); + spin_lock_init(&h->lock); + h->acl_num = 0; + h->sco_num = 0; +} + +static inline void hci_conn_hash_add(struct hci_dev *hdev, struct hci_conn *c) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + list_add(&c->list, &h->list); + switch (c->type) { + case ACL_LINK: + h->acl_num++; + break; + case LE_LINK: + h->le_num++; + break; + case SCO_LINK: + case ESCO_LINK: + h->sco_num++; + break; + } +} + +static inline void hci_conn_hash_del(struct hci_dev *hdev, struct hci_conn *c) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + list_del(&c->list); + switch (c->type) { + case ACL_LINK: + h->acl_num--; + break; + case LE_LINK: + h->le_num--; + break; + case SCO_LINK: + case ESCO_LINK: + h->sco_num--; + break; + } +} + +static inline unsigned int hci_conn_num(struct hci_dev *hdev, __u8 type) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + switch (type) { + case ACL_LINK: + return h->acl_num; + case LE_LINK: + return h->le_num; + case SCO_LINK: + case ESCO_LINK: + return h->sco_num; + default: + return 0; + } +} + +static inline struct hci_conn *hci_conn_hash_lookup_handle(struct hci_dev *hdev, + __u16 handle) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + struct list_head *p; + struct hci_conn *c; + + list_for_each(p, &h->list) { + c = list_entry(p, struct hci_conn, list); + if (c->handle == handle) + return c; + } + return NULL; +} + +static inline struct hci_conn *hci_conn_hash_lookup_ba(struct hci_dev *hdev, + __u8 type, bdaddr_t *ba) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + struct list_head *p; + struct hci_conn *c; + + list_for_each(p, &h->list) { + c = list_entry(p, struct hci_conn, list); + if (c->type == type && !bacmp(&c->dst, ba)) + return c; + } + return NULL; +} + +static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev, + __u8 type, __u16 state) +{ + struct hci_conn_hash *h = &hdev->conn_hash; + struct list_head *p; + struct hci_conn *c; + + list_for_each(p, &h->list) { + c = list_entry(p, struct hci_conn, list); + if (c->type == type && c->state == state) + return c; + } + return NULL; +} + +static inline void hci_chan_hash_init(struct hci_conn *c) +{ + struct hci_chan_hash *h = &c->chan_hash; + INIT_LIST_HEAD(&h->list); + spin_lock_init(&h->lock); + h->num = 0; +} + +static inline void hci_chan_hash_add(struct hci_conn *c, struct hci_chan *chan) +{ + struct hci_chan_hash *h = &c->chan_hash; + list_add(&chan->list, &h->list); + h->num++; +} + +static inline void hci_chan_hash_del(struct hci_conn *c, struct hci_chan *chan) +{ + struct hci_chan_hash *h = &c->chan_hash; + list_del(&chan->list); + h->num--; +} + +void hci_acl_connect(struct hci_conn *conn); +void hci_acl_disconn(struct hci_conn *conn, __u8 reason); +void hci_add_sco(struct hci_conn *conn, __u16 handle); +void hci_setup_sync(struct hci_conn *conn, __u16 handle); +void hci_sco_setup(struct hci_conn *conn, __u8 status); + +struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst); +int hci_conn_del(struct hci_conn *conn); +void hci_conn_hash_flush(struct hci_dev *hdev); +void hci_conn_check_pending(struct hci_dev *hdev); + +struct hci_chan *hci_chan_create(struct hci_conn *conn); +int hci_chan_del(struct hci_chan *chan); +void hci_chan_hash_flush(struct hci_conn *conn); + +struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, + __u8 sec_level, __u8 auth_type); +int hci_conn_check_link_mode(struct hci_conn *conn); +int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level); +int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type); +int hci_conn_change_link_key(struct hci_conn *conn); +int hci_conn_switch_role(struct hci_conn *conn, __u8 role); + +void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active); +void hci_conn_enter_sniff_mode(struct hci_conn *conn); + +void hci_conn_hold_device(struct hci_conn *conn); +void hci_conn_put_device(struct hci_conn *conn); + +static inline void hci_conn_hold(struct hci_conn *conn) +{ + atomic_inc(&conn->refcnt); + del_timer(&conn->disc_timer); +} + +static inline void hci_conn_put(struct hci_conn *conn) +{ + if (atomic_dec_and_test(&conn->refcnt)) { + unsigned long timeo; + if (conn->type == ACL_LINK || conn->type == LE_LINK) { + del_timer(&conn->idle_timer); + if (conn->state == BT_CONNECTED) { + timeo = msecs_to_jiffies(conn->disc_timeout); + if (!conn->out) + timeo *= 2; + } else { + timeo = msecs_to_jiffies(10); + } + } else { + timeo = msecs_to_jiffies(10); + } + mod_timer(&conn->disc_timer, jiffies + timeo); + } +} + +/* ----- HCI Devices ----- */ +static inline void __hci_dev_put(struct hci_dev *d) +{ + if (atomic_dec_and_test(&d->refcnt)) + d->destruct(d); +} + +/* + * hci_dev_put and hci_dev_hold are macros to avoid dragging all the + * overhead of all the modular infrastructure into this header. + */ +#define hci_dev_put(d) \ +do { \ + __hci_dev_put(d); \ + module_put(d->owner); \ +} while (0) + +static inline struct hci_dev *__hci_dev_hold(struct hci_dev *d) +{ + atomic_inc(&d->refcnt); + return d; +} + +#define hci_dev_hold(d) \ +({ \ + try_module_get(d->owner) ? __hci_dev_hold(d) : NULL; \ +}) + +#define hci_dev_lock(d) spin_lock(&d->lock) +#define hci_dev_unlock(d) spin_unlock(&d->lock) +#define hci_dev_lock_bh(d) spin_lock_bh(&d->lock) +#define hci_dev_unlock_bh(d) spin_unlock_bh(&d->lock) + +struct hci_dev *hci_dev_get(int index); +struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst); + +struct hci_dev *hci_alloc_dev(void); +void hci_free_dev(struct hci_dev *hdev); +int hci_register_dev(struct hci_dev *hdev); +void hci_unregister_dev(struct hci_dev *hdev); +int hci_suspend_dev(struct hci_dev *hdev); +int hci_resume_dev(struct hci_dev *hdev); +int hci_dev_open(__u16 dev); +int hci_dev_close(__u16 dev); +int hci_dev_reset(__u16 dev); +int hci_dev_reset_stat(__u16 dev); +int hci_dev_cmd(unsigned int cmd, void __user *arg); +int hci_get_dev_list(void __user *arg); +int hci_get_dev_info(void __user *arg); +int hci_get_conn_list(void __user *arg); +int hci_get_conn_info(struct hci_dev *hdev, void __user *arg); +int hci_get_auth_info(struct hci_dev *hdev, void __user *arg); +int hci_inquiry(void __user *arg); + +struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr); +int hci_blacklist_clear(struct hci_dev *hdev); +int hci_blacklist_add(struct hci_dev *hdev, bdaddr_t *bdaddr); +int hci_blacklist_del(struct hci_dev *hdev, bdaddr_t *bdaddr); + +int hci_uuids_clear(struct hci_dev *hdev); + +int hci_link_keys_clear(struct hci_dev *hdev); +struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr); +int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, + bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len); +struct link_key *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]); +struct link_key *hci_find_link_key_type(struct hci_dev *hdev, + bdaddr_t *bdaddr, u8 type); +int hci_add_ltk(struct hci_dev *hdev, int new_key, bdaddr_t *bdaddr, + u8 key_size, __le16 ediv, u8 rand[8], u8 ltk[16]); +int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr); + +int hci_remote_oob_data_clear(struct hci_dev *hdev); +struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev, + bdaddr_t *bdaddr); +int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash, + u8 *randomizer); +int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr); + +#define ADV_CLEAR_TIMEOUT (3*60*HZ) /* Three minutes */ +int hci_adv_entries_clear(struct hci_dev *hdev); +struct adv_entry *hci_find_adv_entry(struct hci_dev *hdev, bdaddr_t *bdaddr); +int hci_add_adv_entry(struct hci_dev *hdev, + struct hci_ev_le_advertising_info *ev); + +void hci_del_off_timer(struct hci_dev *hdev); + +void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb); + +int hci_recv_frame(struct sk_buff *skb); +int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count); +int hci_recv_stream_fragment(struct hci_dev *hdev, void *data, int count); + +void hci_init_sysfs(struct hci_dev *hdev); +int hci_add_sysfs(struct hci_dev *hdev); +void hci_del_sysfs(struct hci_dev *hdev); +void hci_conn_init_sysfs(struct hci_conn *conn); +void hci_conn_add_sysfs(struct hci_conn *conn); +void hci_conn_del_sysfs(struct hci_conn *conn); + +#define SET_HCIDEV_DEV(hdev, pdev) ((hdev)->parent = (pdev)) + +/* ----- LMP capabilities ----- */ +#define lmp_rswitch_capable(dev) ((dev)->features[0] & LMP_RSWITCH) +#define lmp_encrypt_capable(dev) ((dev)->features[0] & LMP_ENCRYPT) +#define lmp_sniff_capable(dev) ((dev)->features[0] & LMP_SNIFF) +#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR) +#define lmp_esco_capable(dev) ((dev)->features[3] & LMP_ESCO) +#define lmp_ssp_capable(dev) ((dev)->features[6] & LMP_SIMPLE_PAIR) +#define lmp_no_flush_capable(dev) ((dev)->features[6] & LMP_NO_FLUSH) +#define lmp_le_capable(dev) ((dev)->features[4] & LMP_LE) + +/* ----- Extended LMP capabilities ----- */ +#define lmp_host_le_capable(dev) ((dev)->extfeatures[0] & LMP_HOST_LE) + +/* ----- HCI protocols ----- */ +struct hci_proto { + char *name; + unsigned int id; + unsigned long flags; + + void *priv; + + int (*connect_ind) (struct hci_dev *hdev, bdaddr_t *bdaddr, + __u8 type); + int (*connect_cfm) (struct hci_conn *conn, __u8 status); + int (*disconn_ind) (struct hci_conn *conn); + int (*disconn_cfm) (struct hci_conn *conn, __u8 reason); + int (*recv_acldata) (struct hci_conn *conn, struct sk_buff *skb, + __u16 flags); + int (*recv_scodata) (struct hci_conn *conn, struct sk_buff *skb); + int (*security_cfm) (struct hci_conn *conn, __u8 status, + __u8 encrypt); +}; + +static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, + __u8 type) +{ + register struct hci_proto *hp; + int mask = 0; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->connect_ind) + mask |= hp->connect_ind(hdev, bdaddr, type); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->connect_ind) + mask |= hp->connect_ind(hdev, bdaddr, type); + + return mask; +} + +static inline void hci_proto_connect_cfm(struct hci_conn *conn, __u8 status) +{ + register struct hci_proto *hp; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->connect_cfm) + hp->connect_cfm(conn, status); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->connect_cfm) + hp->connect_cfm(conn, status); + + if (conn->connect_cfm_cb) + conn->connect_cfm_cb(conn, status); +} + +static inline int hci_proto_disconn_ind(struct hci_conn *conn) +{ + register struct hci_proto *hp; + int reason = HCI_ERROR_REMOTE_USER_TERM; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->disconn_ind) + reason = hp->disconn_ind(conn); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->disconn_ind) + reason = hp->disconn_ind(conn); + + return reason; +} + +static inline void hci_proto_disconn_cfm(struct hci_conn *conn, __u8 reason) +{ + register struct hci_proto *hp; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->disconn_cfm) + hp->disconn_cfm(conn, reason); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->disconn_cfm) + hp->disconn_cfm(conn, reason); + + if (conn->disconn_cfm_cb) + conn->disconn_cfm_cb(conn, reason); +} + +static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status) +{ + register struct hci_proto *hp; + __u8 encrypt; + + if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + return; + + encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->security_cfm) + hp->security_cfm(conn, status, encrypt); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->security_cfm) + hp->security_cfm(conn, status, encrypt); + + if (conn->security_cfm_cb) + conn->security_cfm_cb(conn, status); +} + +static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status, + __u8 encrypt) +{ + register struct hci_proto *hp; + + hp = hci_proto[HCI_PROTO_L2CAP]; + if (hp && hp->security_cfm) + hp->security_cfm(conn, status, encrypt); + + hp = hci_proto[HCI_PROTO_SCO]; + if (hp && hp->security_cfm) + hp->security_cfm(conn, status, encrypt); + + if (conn->security_cfm_cb) + conn->security_cfm_cb(conn, status); +} + +int hci_register_proto(struct hci_proto *hproto); +int hci_unregister_proto(struct hci_proto *hproto); + +/* ----- HCI callbacks ----- */ +struct hci_cb { + struct list_head list; + + char *name; + + void (*security_cfm) (struct hci_conn *conn, __u8 status, + __u8 encrypt); + void (*key_change_cfm) (struct hci_conn *conn, __u8 status); + void (*role_switch_cfm) (struct hci_conn *conn, __u8 status, __u8 role); +}; + +static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status) +{ + struct list_head *p; + __u8 encrypt; + + hci_proto_auth_cfm(conn, status); + + if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + return; + + encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00; + + read_lock_bh(&hci_cb_list_lock); + list_for_each(p, &hci_cb_list) { + struct hci_cb *cb = list_entry(p, struct hci_cb, list); + if (cb->security_cfm) + cb->security_cfm(conn, status, encrypt); + } + read_unlock_bh(&hci_cb_list_lock); +} + +static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, + __u8 encrypt) +{ + struct list_head *p; + + if (conn->sec_level == BT_SECURITY_SDP) + conn->sec_level = BT_SECURITY_LOW; + + if (conn->pending_sec_level > conn->sec_level) + conn->sec_level = conn->pending_sec_level; + + hci_proto_encrypt_cfm(conn, status, encrypt); + + read_lock_bh(&hci_cb_list_lock); + list_for_each(p, &hci_cb_list) { + struct hci_cb *cb = list_entry(p, struct hci_cb, list); + if (cb->security_cfm) + cb->security_cfm(conn, status, encrypt); + } + read_unlock_bh(&hci_cb_list_lock); +} + +static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status) +{ + struct list_head *p; + + read_lock_bh(&hci_cb_list_lock); + list_for_each(p, &hci_cb_list) { + struct hci_cb *cb = list_entry(p, struct hci_cb, list); + if (cb->key_change_cfm) + cb->key_change_cfm(conn, status); + } + read_unlock_bh(&hci_cb_list_lock); +} + +static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status, + __u8 role) +{ + struct list_head *p; + + read_lock_bh(&hci_cb_list_lock); + list_for_each(p, &hci_cb_list) { + struct hci_cb *cb = list_entry(p, struct hci_cb, list); + if (cb->role_switch_cfm) + cb->role_switch_cfm(conn, status, role); + } + read_unlock_bh(&hci_cb_list_lock); +} + +int hci_register_cb(struct hci_cb *hcb); +int hci_unregister_cb(struct hci_cb *hcb); + +int hci_register_notifier(struct notifier_block *nb); +int hci_unregister_notifier(struct notifier_block *nb); + +int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen, void *param); +void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags); +void hci_send_sco(struct hci_conn *conn, struct sk_buff *skb); + +void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode); + +void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data); + +/* ----- HCI Sockets ----- */ +void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb, + struct sock *skip_sk); + +/* Management interface */ +int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); +int mgmt_index_added(struct hci_dev *hdev); +int mgmt_index_removed(struct hci_dev *hdev); +int mgmt_powered(struct hci_dev *hdev, u8 powered); +int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); +int mgmt_connectable(struct hci_dev *hdev, u8 connectable); +int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status); +int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, + u8 persistent); +int mgmt_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); +int mgmt_disconnected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type); +int mgmt_disconnect_failed(struct hci_dev *hdev); +int mgmt_connect_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type, + u8 status); +int mgmt_pin_code_request(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 secure); +int mgmt_pin_code_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr, + u8 status); +int mgmt_pin_code_neg_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr, + u8 status); +int mgmt_user_confirm_request(struct hci_dev *hdev, bdaddr_t *bdaddr, + __le32 value, u8 confirm_hint); +int mgmt_user_confirm_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr, + u8 status); +int mgmt_user_confirm_neg_reply_complete(struct hci_dev *hdev, + bdaddr_t *bdaddr, u8 status); +int mgmt_auth_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 status); +int mgmt_set_local_name_complete(struct hci_dev *hdev, u8 *name, u8 status); +int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash, + u8 *randomizer, u8 status); +int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type, + u8 *dev_class, s8 rssi, u8 *eir); +int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *name); +int mgmt_inquiry_failed(struct hci_dev *hdev, u8 status); +int mgmt_discovering(struct hci_dev *hdev, u8 discovering); +int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr); +int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr); + +/* HCI info for socket */ +#define hci_pi(sk) ((struct hci_pinfo *) sk) + +struct hci_pinfo { + struct bt_sock bt; + struct hci_dev *hdev; + struct hci_filter filter; + __u32 cmsg_mask; + unsigned short channel; +}; + +/* HCI security filter */ +#define HCI_SFLT_MAX_OGF 5 + +struct hci_sec_filter { + __u32 type_mask; + __u32 event_mask[2]; + __u32 ocf_mask[HCI_SFLT_MAX_OGF + 1][4]; +}; + +/* ----- HCI requests ----- */ +#define HCI_REQ_DONE 0 +#define HCI_REQ_PEND 1 +#define HCI_REQ_CANCELED 2 + +#define hci_req_lock(d) mutex_lock(&d->req_lock) +#define hci_req_unlock(d) mutex_unlock(&d->req_lock) + +void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result); + +void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, + u16 latency, u16 to_multiplier); +void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], + __u8 ltk[16]); +void hci_le_ltk_reply(struct hci_conn *conn, u8 ltk[16]); +void hci_le_ltk_neg_reply(struct hci_conn *conn); + +int hci_do_inquiry(struct hci_dev *hdev, u8 length); +int hci_cancel_inquiry(struct hci_dev *hdev); + +#endif /* __HCI_CORE_H */ diff --git a/include/compat/net/bluetooth/l2cap.h b/include/compat/net/bluetooth/l2cap.h new file mode 100755 index 0000000..875021a --- /dev/null +++ b/include/compat/net/bluetooth/l2cap.h @@ -0,0 +1,814 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + Copyright (C) 2000-2001 Qualcomm Incorporated + Copyright (C) 2009-2010 Gustavo F. Padovan + Copyright (C) 2010 Google Inc. + + Written 2000,2001 by Maxim Krasnyansky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __L2CAP_H +#define __L2CAP_H + +#include + +/* L2CAP defaults */ +#define L2CAP_DEFAULT_MTU 672 +#define L2CAP_DEFAULT_MIN_MTU 48 +#define L2CAP_DEFAULT_FLUSH_TO 0xffff +#define L2CAP_DEFAULT_TX_WINDOW 63 +#define L2CAP_DEFAULT_EXT_WINDOW 0x3FFF +#define L2CAP_DEFAULT_MAX_TX 3 +#define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */ +#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */ +#define L2CAP_DEFAULT_MAX_PDU_SIZE 1009 /* Sized for 3-DH5 packet */ +#define L2CAP_DEFAULT_ACK_TO 200 +#define L2CAP_LE_DEFAULT_MTU 23 +#define L2CAP_DEFAULT_MAX_SDU_SIZE 0xFFFF +#define L2CAP_DEFAULT_SDU_ITIME 0xFFFFFFFF +#define L2CAP_DEFAULT_ACC_LAT 0xFFFFFFFF + +#define L2CAP_DISC_TIMEOUT (100) +#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */ +#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ +#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ + +/* L2CAP socket address */ +struct sockaddr_l2 { + sa_family_t l2_family; + __le16 l2_psm; + bdaddr_t l2_bdaddr; + __le16 l2_cid; +}; + +/* L2CAP socket options */ +#define L2CAP_OPTIONS 0x01 +struct l2cap_options { + __u16 omtu; + __u16 imtu; + __u16 flush_to; + __u8 mode; + __u8 fcs; + __u8 max_tx; + __u16 txwin_size; +}; + +#define L2CAP_CONNINFO 0x02 +struct l2cap_conninfo { + __u16 hci_handle; + __u8 dev_class[3]; +}; + +#define L2CAP_LM 0x03 +#define L2CAP_LM_MASTER 0x0001 +#define L2CAP_LM_AUTH 0x0002 +#define L2CAP_LM_ENCRYPT 0x0004 +#define L2CAP_LM_TRUSTED 0x0008 +#define L2CAP_LM_RELIABLE 0x0010 +#define L2CAP_LM_SECURE 0x0020 + +/* L2CAP command codes */ +#define L2CAP_COMMAND_REJ 0x01 +#define L2CAP_CONN_REQ 0x02 +#define L2CAP_CONN_RSP 0x03 +#define L2CAP_CONF_REQ 0x04 +#define L2CAP_CONF_RSP 0x05 +#define L2CAP_DISCONN_REQ 0x06 +#define L2CAP_DISCONN_RSP 0x07 +#define L2CAP_ECHO_REQ 0x08 +#define L2CAP_ECHO_RSP 0x09 +#define L2CAP_INFO_REQ 0x0a +#define L2CAP_INFO_RSP 0x0b +#define L2CAP_CREATE_CHAN_REQ 0x0c +#define L2CAP_CREATE_CHAN_RSP 0x0d +#define L2CAP_MOVE_CHAN_REQ 0x0e +#define L2CAP_MOVE_CHAN_RSP 0x0f +#define L2CAP_MOVE_CHAN_CFM 0x10 +#define L2CAP_MOVE_CHAN_CFM_RSP 0x11 +#define L2CAP_CONN_PARAM_UPDATE_REQ 0x12 +#define L2CAP_CONN_PARAM_UPDATE_RSP 0x13 + +/* L2CAP extended feature mask */ +#define L2CAP_FEAT_FLOWCTL 0x00000001 +#define L2CAP_FEAT_RETRANS 0x00000002 +#define L2CAP_FEAT_BIDIR_QOS 0x00000004 +#define L2CAP_FEAT_ERTM 0x00000008 +#define L2CAP_FEAT_STREAMING 0x00000010 +#define L2CAP_FEAT_FCS 0x00000020 +#define L2CAP_FEAT_EXT_FLOW 0x00000040 +#define L2CAP_FEAT_FIXED_CHAN 0x00000080 +#define L2CAP_FEAT_EXT_WINDOW 0x00000100 +#define L2CAP_FEAT_UCD 0x00000200 + +/* L2CAP checksum option */ +#define L2CAP_FCS_NONE 0x00 +#define L2CAP_FCS_CRC16 0x01 + +/* L2CAP fixed channels */ +#define L2CAP_FC_L2CAP 0x02 +#define L2CAP_FC_A2MP 0x08 + +/* L2CAP Control Field bit masks */ +#define L2CAP_CTRL_SAR 0xC000 +#define L2CAP_CTRL_REQSEQ 0x3F00 +#define L2CAP_CTRL_TXSEQ 0x007E +#define L2CAP_CTRL_SUPERVISE 0x000C + +#define L2CAP_CTRL_RETRANS 0x0080 +#define L2CAP_CTRL_FINAL 0x0080 +#define L2CAP_CTRL_POLL 0x0010 +#define L2CAP_CTRL_FRAME_TYPE 0x0001 /* I- or S-Frame */ + +#define L2CAP_CTRL_TXSEQ_SHIFT 1 +#define L2CAP_CTRL_SUPER_SHIFT 2 +#define L2CAP_CTRL_REQSEQ_SHIFT 8 +#define L2CAP_CTRL_SAR_SHIFT 14 + +/* L2CAP Extended Control Field bit mask */ +#define L2CAP_EXT_CTRL_TXSEQ 0xFFFC0000 +#define L2CAP_EXT_CTRL_SAR 0x00030000 +#define L2CAP_EXT_CTRL_SUPERVISE 0x00030000 +#define L2CAP_EXT_CTRL_REQSEQ 0x0000FFFC + +#define L2CAP_EXT_CTRL_POLL 0x00040000 +#define L2CAP_EXT_CTRL_FINAL 0x00000002 +#define L2CAP_EXT_CTRL_FRAME_TYPE 0x00000001 /* I- or S-Frame */ + +#define L2CAP_EXT_CTRL_REQSEQ_SHIFT 2 +#define L2CAP_EXT_CTRL_SAR_SHIFT 16 +#define L2CAP_EXT_CTRL_SUPER_SHIFT 16 +#define L2CAP_EXT_CTRL_TXSEQ_SHIFT 18 + +/* L2CAP Supervisory Function */ +#define L2CAP_SUPER_RR 0x00 +#define L2CAP_SUPER_REJ 0x01 +#define L2CAP_SUPER_RNR 0x02 +#define L2CAP_SUPER_SREJ 0x03 + +/* L2CAP Segmentation and Reassembly */ +#define L2CAP_SAR_UNSEGMENTED 0x00 +#define L2CAP_SAR_START 0x01 +#define L2CAP_SAR_END 0x02 +#define L2CAP_SAR_CONTINUE 0x03 + +/* L2CAP Command rej. reasons */ +#define L2CAP_REJ_NOT_UNDERSTOOD 0x0000 +#define L2CAP_REJ_MTU_EXCEEDED 0x0001 +#define L2CAP_REJ_INVALID_CID 0x0002 + +/* L2CAP structures */ +struct l2cap_hdr { + __le16 len; + __le16 cid; +} __packed; +#define L2CAP_HDR_SIZE 4 +#define L2CAP_ENH_HDR_SIZE 6 +#define L2CAP_EXT_HDR_SIZE 8 + +#define L2CAP_FCS_SIZE 2 +#define L2CAP_SDULEN_SIZE 2 +#define L2CAP_PSMLEN_SIZE 2 + +struct l2cap_cmd_hdr { + __u8 code; + __u8 ident; + __le16 len; +} __packed; +#define L2CAP_CMD_HDR_SIZE 4 + +struct l2cap_cmd_rej_unk { + __le16 reason; +} __packed; + +struct l2cap_cmd_rej_mtu { + __le16 reason; + __le16 max_mtu; +} __packed; + +struct l2cap_cmd_rej_cid { + __le16 reason; + __le16 scid; + __le16 dcid; +} __packed; + +struct l2cap_conn_req { + __le16 psm; + __le16 scid; +} __packed; + +struct l2cap_conn_rsp { + __le16 dcid; + __le16 scid; + __le16 result; + __le16 status; +} __packed; + +/* channel indentifier */ +#define L2CAP_CID_SIGNALING 0x0001 +#define L2CAP_CID_CONN_LESS 0x0002 +#define L2CAP_CID_LE_DATA 0x0004 +#define L2CAP_CID_LE_SIGNALING 0x0005 +#define L2CAP_CID_SMP 0x0006 +#define L2CAP_CID_DYN_START 0x0040 +#define L2CAP_CID_DYN_END 0xffff + +/* connect/create channel results */ +#define L2CAP_CR_SUCCESS 0x0000 +#define L2CAP_CR_PEND 0x0001 +#define L2CAP_CR_BAD_PSM 0x0002 +#define L2CAP_CR_SEC_BLOCK 0x0003 +#define L2CAP_CR_NO_MEM 0x0004 +#define L2CAP_CR_BAD_AMP 0x0005 + +/* connect/create channel status */ +#define L2CAP_CS_NO_INFO 0x0000 +#define L2CAP_CS_AUTHEN_PEND 0x0001 +#define L2CAP_CS_AUTHOR_PEND 0x0002 + +struct l2cap_conf_req { + __le16 dcid; + __le16 flags; + __u8 data[0]; +} __packed; + +struct l2cap_conf_rsp { + __le16 scid; + __le16 flags; + __le16 result; + __u8 data[0]; +} __packed; + +#define L2CAP_CONF_SUCCESS 0x0000 +#define L2CAP_CONF_UNACCEPT 0x0001 +#define L2CAP_CONF_REJECT 0x0002 +#define L2CAP_CONF_UNKNOWN 0x0003 +#define L2CAP_CONF_PENDING 0x0004 +#define L2CAP_CONF_EFS_REJECT 0x0005 + +struct l2cap_conf_opt { + __u8 type; + __u8 len; + __u8 val[0]; +} __packed; +#define L2CAP_CONF_OPT_SIZE 2 + +#define L2CAP_CONF_HINT 0x80 +#define L2CAP_CONF_MASK 0x7f + +#define L2CAP_CONF_MTU 0x01 +#define L2CAP_CONF_FLUSH_TO 0x02 +#define L2CAP_CONF_QOS 0x03 +#define L2CAP_CONF_RFC 0x04 +#define L2CAP_CONF_FCS 0x05 +#define L2CAP_CONF_EFS 0x06 +#define L2CAP_CONF_EWS 0x07 + +#define L2CAP_CONF_MAX_SIZE 22 + +struct l2cap_conf_rfc { + __u8 mode; + __u8 txwin_size; + __u8 max_transmit; + __le16 retrans_timeout; + __le16 monitor_timeout; + __le16 max_pdu_size; +} __packed; + +#define L2CAP_MODE_BASIC 0x00 +#define L2CAP_MODE_RETRANS 0x01 +#define L2CAP_MODE_FLOWCTL 0x02 +#define L2CAP_MODE_ERTM 0x03 +#define L2CAP_MODE_STREAMING 0x04 + +struct l2cap_conf_efs { + __u8 id; + __u8 stype; + __le16 msdu; + __le32 sdu_itime; + __le32 acc_lat; + __le32 flush_to; +} __packed; + +#define L2CAP_SERV_NOTRAFIC 0x00 +#define L2CAP_SERV_BESTEFFORT 0x01 +#define L2CAP_SERV_GUARANTEED 0x02 + +#define L2CAP_BESTEFFORT_ID 0x01 + +struct l2cap_disconn_req { + __le16 dcid; + __le16 scid; +} __packed; + +struct l2cap_disconn_rsp { + __le16 dcid; + __le16 scid; +} __packed; + +struct l2cap_info_req { + __le16 type; +} __packed; + +struct l2cap_info_rsp { + __le16 type; + __le16 result; + __u8 data[0]; +} __packed; + +struct l2cap_create_chan_req { + __le16 psm; + __le16 scid; + __u8 amp_id; +} __packed; + +struct l2cap_create_chan_rsp { + __le16 dcid; + __le16 scid; + __le16 result; + __le16 status; +} __packed; + +struct l2cap_move_chan_req { + __le16 icid; + __u8 dest_amp_id; +} __packed; + +struct l2cap_move_chan_rsp { + __le16 icid; + __le16 result; +} __packed; + +#define L2CAP_MR_SUCCESS 0x0000 +#define L2CAP_MR_PEND 0x0001 +#define L2CAP_MR_BAD_ID 0x0002 +#define L2CAP_MR_SAME_ID 0x0003 +#define L2CAP_MR_NOT_SUPP 0x0004 +#define L2CAP_MR_COLLISION 0x0005 +#define L2CAP_MR_NOT_ALLOWED 0x0006 + +struct l2cap_move_chan_cfm { + __le16 icid; + __le16 result; +} __packed; + +#define L2CAP_MC_CONFIRMED 0x0000 +#define L2CAP_MC_UNCONFIRMED 0x0001 + +struct l2cap_move_chan_cfm_rsp { + __le16 icid; +} __packed; + +/* info type */ +#define L2CAP_IT_CL_MTU 0x0001 +#define L2CAP_IT_FEAT_MASK 0x0002 +#define L2CAP_IT_FIXED_CHAN 0x0003 + +/* info result */ +#define L2CAP_IR_SUCCESS 0x0000 +#define L2CAP_IR_NOTSUPP 0x0001 + +struct l2cap_conn_param_update_req { + __le16 min; + __le16 max; + __le16 latency; + __le16 to_multiplier; +} __packed; + +struct l2cap_conn_param_update_rsp { + __le16 result; +} __packed; + +/* Connection Parameters result */ +#define L2CAP_CONN_PARAM_ACCEPTED 0x0000 +#define L2CAP_CONN_PARAM_REJECTED 0x0001 + +/* ----- L2CAP channels and connections ----- */ +struct srej_list { + __u16 tx_seq; + struct list_head list; +}; + +struct l2cap_chan { + struct sock *sk; + + struct l2cap_conn *conn; + + __u8 state; + + atomic_t refcnt; + + __le16 psm; + __u16 dcid; + __u16 scid; + + __u16 imtu; + __u16 omtu; + __u16 flush_to; + __u8 mode; + __u8 chan_type; + __u8 chan_policy; + + __le16 sport; + + __u8 sec_level; + + __u8 ident; + + __u8 conf_req[64]; + __u8 conf_len; + __u8 num_conf_req; + __u8 num_conf_rsp; + + __u8 fcs; + + __u16 tx_win; + __u16 tx_win_max; + __u8 max_tx; + __u16 retrans_timeout; + __u16 monitor_timeout; + __u16 mps; + + unsigned long conf_state; + unsigned long conn_state; + unsigned long flags; + + __u16 next_tx_seq; + __u16 expected_ack_seq; + __u16 expected_tx_seq; + __u16 buffer_seq; + __u16 buffer_seq_srej; + __u16 srej_save_reqseq; + __u16 frames_sent; + __u16 unacked_frames; + __u8 retry_count; + __u8 num_acked; + __u16 sdu_len; + struct sk_buff *sdu; + struct sk_buff *sdu_last_frag; + + __u16 remote_tx_win; + __u8 remote_max_tx; + __u16 remote_mps; + + __u8 local_id; + __u8 local_stype; + __u16 local_msdu; + __u32 local_sdu_itime; + __u32 local_acc_lat; + __u32 local_flush_to; + + __u8 remote_id; + __u8 remote_stype; + __u16 remote_msdu; + __u32 remote_sdu_itime; + __u32 remote_acc_lat; + __u32 remote_flush_to; + + struct timer_list chan_timer; + struct timer_list retrans_timer; + struct timer_list monitor_timer; + struct timer_list ack_timer; + struct sk_buff *tx_send_head; + struct sk_buff_head tx_q; + struct sk_buff_head srej_q; + struct list_head srej_l; + + struct list_head list; + struct list_head global_l; + + void *data; + struct l2cap_ops *ops; +}; + +struct l2cap_ops { + char *name; + + struct l2cap_chan *(*new_connection) (void *data); + int (*recv) (void *data, struct sk_buff *skb); + void (*close) (void *data); + void (*state_change) (void *data, int state); +}; + +struct l2cap_conn { + struct hci_conn *hcon; + struct hci_chan *hchan; + + bdaddr_t *dst; + bdaddr_t *src; + + unsigned int mtu; + + __u32 feat_mask; + + __u8 info_state; + __u8 info_ident; + + struct timer_list info_timer; + + spinlock_t lock; + + struct sk_buff *rx_skb; + __u32 rx_len; + __u8 tx_ident; + + __u8 disc_reason; + + struct timer_list security_timer; + struct smp_chan *smp_chan; + + struct list_head chan_l; + rwlock_t chan_lock; +}; + +#define L2CAP_INFO_CL_MTU_REQ_SENT 0x01 +#define L2CAP_INFO_FEAT_MASK_REQ_SENT 0x04 +#define L2CAP_INFO_FEAT_MASK_REQ_DONE 0x08 + +#define L2CAP_CHAN_RAW 1 +#define L2CAP_CHAN_CONN_LESS 2 +#define L2CAP_CHAN_CONN_ORIENTED 3 + +/* ----- L2CAP socket info ----- */ +#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk) + +struct l2cap_pinfo { + struct bt_sock bt; + struct l2cap_chan *chan; + struct sk_buff *rx_busy_skb; +}; + +enum { + CONF_REQ_SENT, + CONF_INPUT_DONE, + CONF_OUTPUT_DONE, + CONF_MTU_DONE, + CONF_MODE_DONE, + CONF_CONNECT_PEND, + CONF_NO_FCS_RECV, + CONF_STATE2_DEVICE, + CONF_EWS_RECV, + CONF_LOC_CONF_PEND, + CONF_REM_CONF_PEND, +}; + +#define L2CAP_CONF_MAX_CONF_REQ 2 +#define L2CAP_CONF_MAX_CONF_RSP 2 + +enum { + CONN_SREJ_SENT, + CONN_WAIT_F, + CONN_SREJ_ACT, + CONN_SEND_PBIT, + CONN_REMOTE_BUSY, + CONN_LOCAL_BUSY, + CONN_REJ_ACT, + CONN_SEND_FBIT, + CONN_RNR_SENT, +}; + +/* Definitions for flags in l2cap_chan */ +enum { + FLAG_ROLE_SWITCH, + FLAG_FORCE_ACTIVE, + FLAG_FORCE_RELIABLE, + FLAG_FLUSHABLE, + FLAG_EXT_CTRL, + FLAG_EFS_ENABLE, +}; + +#define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t)) +#define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer) +#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \ + L2CAP_DEFAULT_RETRANS_TO); +#define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer) +#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \ + L2CAP_DEFAULT_MONITOR_TO); +#define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer) +#define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \ + L2CAP_DEFAULT_ACK_TO); +#define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer) + +static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2) +{ + int offset; + + offset = (seq1 - seq2) % (chan->tx_win_max + 1); + if (offset < 0) + offset += (chan->tx_win_max + 1); + + return offset; +} + +static inline __u16 __next_seq(struct l2cap_chan *chan, __u16 seq) +{ + return (seq + 1) % (chan->tx_win_max + 1); +} + +static inline int l2cap_tx_window_full(struct l2cap_chan *ch) +{ + int sub; + + sub = (ch->next_tx_seq - ch->expected_ack_seq) % 64; + + if (sub < 0) + sub += 64; + + return sub == ch->remote_tx_win; +} + +static inline __u16 __get_reqseq(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (ctrl & L2CAP_EXT_CTRL_REQSEQ) >> + L2CAP_EXT_CTRL_REQSEQ_SHIFT; + else + return (ctrl & L2CAP_CTRL_REQSEQ) >> L2CAP_CTRL_REQSEQ_SHIFT; +} + +static inline __u32 __set_reqseq(struct l2cap_chan *chan, __u32 reqseq) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (reqseq << L2CAP_EXT_CTRL_REQSEQ_SHIFT) & + L2CAP_EXT_CTRL_REQSEQ; + else + return (reqseq << L2CAP_CTRL_REQSEQ_SHIFT) & L2CAP_CTRL_REQSEQ; +} + +static inline __u16 __get_txseq(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (ctrl & L2CAP_EXT_CTRL_TXSEQ) >> + L2CAP_EXT_CTRL_TXSEQ_SHIFT; + else + return (ctrl & L2CAP_CTRL_TXSEQ) >> L2CAP_CTRL_TXSEQ_SHIFT; +} + +static inline __u32 __set_txseq(struct l2cap_chan *chan, __u32 txseq) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (txseq << L2CAP_EXT_CTRL_TXSEQ_SHIFT) & + L2CAP_EXT_CTRL_TXSEQ; + else + return (txseq << L2CAP_CTRL_TXSEQ_SHIFT) & L2CAP_CTRL_TXSEQ; +} + +static inline bool __is_sframe(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return ctrl & L2CAP_EXT_CTRL_FRAME_TYPE; + else + return ctrl & L2CAP_CTRL_FRAME_TYPE; +} + +static inline __u32 __set_sframe(struct l2cap_chan *chan) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return L2CAP_EXT_CTRL_FRAME_TYPE; + else + return L2CAP_CTRL_FRAME_TYPE; +} + +static inline __u8 __get_ctrl_sar(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (ctrl & L2CAP_EXT_CTRL_SAR) >> L2CAP_EXT_CTRL_SAR_SHIFT; + else + return (ctrl & L2CAP_CTRL_SAR) >> L2CAP_CTRL_SAR_SHIFT; +} + +static inline __u32 __set_ctrl_sar(struct l2cap_chan *chan, __u32 sar) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (sar << L2CAP_EXT_CTRL_SAR_SHIFT) & L2CAP_EXT_CTRL_SAR; + else + return (sar << L2CAP_CTRL_SAR_SHIFT) & L2CAP_CTRL_SAR; +} + +static inline bool __is_sar_start(struct l2cap_chan *chan, __u32 ctrl) +{ + return __get_ctrl_sar(chan, ctrl) == L2CAP_SAR_START; +} + +static inline __u32 __get_sar_mask(struct l2cap_chan *chan) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return L2CAP_EXT_CTRL_SAR; + else + return L2CAP_CTRL_SAR; +} + +static inline __u8 __get_ctrl_super(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (ctrl & L2CAP_EXT_CTRL_SUPERVISE) >> + L2CAP_EXT_CTRL_SUPER_SHIFT; + else + return (ctrl & L2CAP_CTRL_SUPERVISE) >> L2CAP_CTRL_SUPER_SHIFT; +} + +static inline __u32 __set_ctrl_super(struct l2cap_chan *chan, __u32 super) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return (super << L2CAP_EXT_CTRL_SUPER_SHIFT) & + L2CAP_EXT_CTRL_SUPERVISE; + else + return (super << L2CAP_CTRL_SUPER_SHIFT) & + L2CAP_CTRL_SUPERVISE; +} + +static inline __u32 __set_ctrl_final(struct l2cap_chan *chan) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return L2CAP_EXT_CTRL_FINAL; + else + return L2CAP_CTRL_FINAL; +} + +static inline bool __is_ctrl_final(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return ctrl & L2CAP_EXT_CTRL_FINAL; + else + return ctrl & L2CAP_CTRL_FINAL; +} + +static inline __u32 __set_ctrl_poll(struct l2cap_chan *chan) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return L2CAP_EXT_CTRL_POLL; + else + return L2CAP_CTRL_POLL; +} + +static inline bool __is_ctrl_poll(struct l2cap_chan *chan, __u32 ctrl) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return ctrl & L2CAP_EXT_CTRL_POLL; + else + return ctrl & L2CAP_CTRL_POLL; +} + +static inline __u32 __get_control(struct l2cap_chan *chan, void *p) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return get_unaligned_le32(p); + else + return get_unaligned_le16(p); +} + +static inline void __put_control(struct l2cap_chan *chan, __u32 control, + void *p) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return put_unaligned_le32(control, p); + else + return put_unaligned_le16(control, p); +} + +static inline __u8 __ctrl_size(struct l2cap_chan *chan) +{ + if (test_bit(FLAG_EXT_CTRL, &chan->flags)) + return L2CAP_EXT_HDR_SIZE - L2CAP_HDR_SIZE; + else + return L2CAP_ENH_HDR_SIZE - L2CAP_HDR_SIZE; +} + +extern int disable_ertm; +extern int enable_hs; + +int l2cap_init_sockets(void); +void l2cap_cleanup_sockets(void); + +void __l2cap_connect_rsp_defer(struct l2cap_chan *chan); +int __l2cap_wait_ack(struct sock *sk); + +int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm); +int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid); + +struct l2cap_chan *l2cap_chan_create(struct sock *sk); +void l2cap_chan_close(struct l2cap_chan *chan, int reason); +void l2cap_chan_destroy(struct l2cap_chan *chan); +int l2cap_chan_connect(struct l2cap_chan *chan); +int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len, + u32 priority); +void l2cap_chan_busy(struct l2cap_chan *chan, int busy); + +#endif /* __L2CAP_H */ diff --git a/include/compat/net/bluetooth/mgmt.h b/include/compat/net/bluetooth/mgmt.h new file mode 100755 index 0000000..3e320c9 --- /dev/null +++ b/include/compat/net/bluetooth/mgmt.h @@ -0,0 +1,324 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + + Copyright (C) 2010 Nokia Corporation + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#define MGMT_INDEX_NONE 0xFFFF + +struct mgmt_hdr { + __le16 opcode; + __le16 index; + __le16 len; +} __packed; + +#define MGMT_OP_READ_VERSION 0x0001 +struct mgmt_rp_read_version { + __u8 version; + __le16 revision; +} __packed; + +#define MGMT_OP_READ_INDEX_LIST 0x0003 +struct mgmt_rp_read_index_list { + __le16 num_controllers; + __le16 index[0]; +} __packed; + +/* Reserve one extra byte for names in management messages so that they + * are always guaranteed to be nul-terminated */ +#define MGMT_MAX_NAME_LENGTH (HCI_MAX_NAME_LENGTH + 1) + +#define MGMT_OP_READ_INFO 0x0004 +struct mgmt_rp_read_info { + __u8 type; + __u8 powered; + __u8 connectable; + __u8 discoverable; + __u8 pairable; + __u8 sec_mode; + bdaddr_t bdaddr; + __u8 dev_class[3]; + __u8 features[8]; + __u16 manufacturer; + __u8 hci_ver; + __u16 hci_rev; + __u8 name[MGMT_MAX_NAME_LENGTH]; +} __packed; + +struct mgmt_mode { + __u8 val; +} __packed; + +#define MGMT_OP_SET_POWERED 0x0005 + +#define MGMT_OP_SET_DISCOVERABLE 0x0006 +struct mgmt_cp_set_discoverable { + __u8 val; + __u16 timeout; +} __packed; + +#define MGMT_OP_SET_CONNECTABLE 0x0007 + +#define MGMT_OP_SET_PAIRABLE 0x0008 + +#define MGMT_OP_ADD_UUID 0x0009 +struct mgmt_cp_add_uuid { + __u8 uuid[16]; + __u8 svc_hint; +} __packed; + +#define MGMT_OP_REMOVE_UUID 0x000A +struct mgmt_cp_remove_uuid { + __u8 uuid[16]; +} __packed; + +#define MGMT_OP_SET_DEV_CLASS 0x000B +struct mgmt_cp_set_dev_class { + __u8 major; + __u8 minor; +} __packed; + +#define MGMT_OP_SET_SERVICE_CACHE 0x000C +struct mgmt_cp_set_service_cache { + __u8 enable; +} __packed; + +struct mgmt_link_key_info { + bdaddr_t bdaddr; + u8 type; + u8 val[16]; + u8 pin_len; +} __packed; + +#define MGMT_OP_LOAD_LINK_KEYS 0x000D +struct mgmt_cp_load_link_keys { + __u8 debug_keys; + __le16 key_count; + struct mgmt_link_key_info keys[0]; +} __packed; + +#define MGMT_OP_REMOVE_KEYS 0x000E +struct mgmt_cp_remove_keys { + bdaddr_t bdaddr; + __u8 disconnect; +} __packed; + +#define MGMT_OP_DISCONNECT 0x000F +struct mgmt_cp_disconnect { + bdaddr_t bdaddr; +} __packed; +struct mgmt_rp_disconnect { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_ADDR_BREDR 0x00 +#define MGMT_ADDR_LE 0x01 +#define MGMT_ADDR_BREDR_LE 0x02 +#define MGMT_ADDR_INVALID 0xff + +struct mgmt_addr_info { + bdaddr_t bdaddr; + __u8 type; +} __packed; + +#define MGMT_OP_GET_CONNECTIONS 0x0010 +struct mgmt_rp_get_connections { + __le16 conn_count; + struct mgmt_addr_info addr[0]; +} __packed; + +#define MGMT_OP_PIN_CODE_REPLY 0x0011 +struct mgmt_cp_pin_code_reply { + bdaddr_t bdaddr; + __u8 pin_len; + __u8 pin_code[16]; +} __packed; +struct mgmt_rp_pin_code_reply { + bdaddr_t bdaddr; + uint8_t status; +} __packed; + +#define MGMT_OP_PIN_CODE_NEG_REPLY 0x0012 +struct mgmt_cp_pin_code_neg_reply { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_OP_SET_IO_CAPABILITY 0x0013 +struct mgmt_cp_set_io_capability { + __u8 io_capability; +} __packed; + +#define MGMT_OP_PAIR_DEVICE 0x0014 +struct mgmt_cp_pair_device { + bdaddr_t bdaddr; + __u8 io_cap; +} __packed; +struct mgmt_rp_pair_device { + bdaddr_t bdaddr; + __u8 status; +} __packed; + +#define MGMT_OP_USER_CONFIRM_REPLY 0x0015 +struct mgmt_cp_user_confirm_reply { + bdaddr_t bdaddr; +} __packed; +struct mgmt_rp_user_confirm_reply { + bdaddr_t bdaddr; + __u8 status; +} __packed; + +#define MGMT_OP_USER_CONFIRM_NEG_REPLY 0x0016 + +#define MGMT_OP_SET_LOCAL_NAME 0x0017 +struct mgmt_cp_set_local_name { + __u8 name[MGMT_MAX_NAME_LENGTH]; +} __packed; + +#define MGMT_OP_READ_LOCAL_OOB_DATA 0x0018 +struct mgmt_rp_read_local_oob_data { + __u8 hash[16]; + __u8 randomizer[16]; +} __packed; + +#define MGMT_OP_ADD_REMOTE_OOB_DATA 0x0019 +struct mgmt_cp_add_remote_oob_data { + bdaddr_t bdaddr; + __u8 hash[16]; + __u8 randomizer[16]; +} __packed; + +#define MGMT_OP_REMOVE_REMOTE_OOB_DATA 0x001A +struct mgmt_cp_remove_remote_oob_data { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_OP_START_DISCOVERY 0x001B + +#define MGMT_OP_STOP_DISCOVERY 0x001C + +#define MGMT_OP_BLOCK_DEVICE 0x001D +struct mgmt_cp_block_device { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_OP_UNBLOCK_DEVICE 0x001E +struct mgmt_cp_unblock_device { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_OP_SET_FAST_CONNECTABLE 0x001F +struct mgmt_cp_set_fast_connectable { + __u8 enable; +} __packed; + +#define MGMT_EV_CMD_COMPLETE 0x0001 +struct mgmt_ev_cmd_complete { + __le16 opcode; + __u8 data[0]; +} __packed; + +#define MGMT_EV_CMD_STATUS 0x0002 +struct mgmt_ev_cmd_status { + __u8 status; + __le16 opcode; +} __packed; + +#define MGMT_EV_CONTROLLER_ERROR 0x0003 +struct mgmt_ev_controller_error { + __u8 error_code; +} __packed; + +#define MGMT_EV_INDEX_ADDED 0x0004 + +#define MGMT_EV_INDEX_REMOVED 0x0005 + +#define MGMT_EV_POWERED 0x0006 + +#define MGMT_EV_DISCOVERABLE 0x0007 + +#define MGMT_EV_CONNECTABLE 0x0008 + +#define MGMT_EV_PAIRABLE 0x0009 + +#define MGMT_EV_NEW_LINK_KEY 0x000A +struct mgmt_ev_new_link_key { + __u8 store_hint; + struct mgmt_link_key_info key; +} __packed; + +#define MGMT_EV_CONNECTED 0x000B + +#define MGMT_EV_DISCONNECTED 0x000C + +#define MGMT_EV_CONNECT_FAILED 0x000D +struct mgmt_ev_connect_failed { + struct mgmt_addr_info addr; + __u8 status; +} __packed; + +#define MGMT_EV_PIN_CODE_REQUEST 0x000E +struct mgmt_ev_pin_code_request { + bdaddr_t bdaddr; + __u8 secure; +} __packed; + +#define MGMT_EV_USER_CONFIRM_REQUEST 0x000F +struct mgmt_ev_user_confirm_request { + bdaddr_t bdaddr; + __u8 confirm_hint; + __le32 value; +} __packed; + +#define MGMT_EV_AUTH_FAILED 0x0010 +struct mgmt_ev_auth_failed { + bdaddr_t bdaddr; + __u8 status; +} __packed; + +#define MGMT_EV_LOCAL_NAME_CHANGED 0x0011 +struct mgmt_ev_local_name_changed { + __u8 name[MGMT_MAX_NAME_LENGTH]; +} __packed; + +#define MGMT_EV_DEVICE_FOUND 0x0012 +struct mgmt_ev_device_found { + struct mgmt_addr_info addr; + __u8 dev_class[3]; + __s8 rssi; + __u8 eir[HCI_MAX_EIR_LENGTH]; +} __packed; + +#define MGMT_EV_REMOTE_NAME 0x0013 +struct mgmt_ev_remote_name { + bdaddr_t bdaddr; + __u8 name[MGMT_MAX_NAME_LENGTH]; +} __packed; + +#define MGMT_EV_DISCOVERING 0x0014 + +#define MGMT_EV_DEVICE_BLOCKED 0x0015 +struct mgmt_ev_device_blocked { + bdaddr_t bdaddr; +} __packed; + +#define MGMT_EV_DEVICE_UNBLOCKED 0x0016 +struct mgmt_ev_device_unblocked { + bdaddr_t bdaddr; +} __packed; diff --git a/include/compat/net/bluetooth/rfcomm.h b/include/compat/net/bluetooth/rfcomm.h new file mode 100755 index 0000000..e2e3eca --- /dev/null +++ b/include/compat/net/bluetooth/rfcomm.h @@ -0,0 +1,372 @@ +/* + RFCOMM implementation for Linux Bluetooth stack (BlueZ) + Copyright (C) 2002 Maxim Krasnyansky + Copyright (C) 2002 Marcel Holtmann + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __RFCOMM_H +#define __RFCOMM_H + +#define RFCOMM_PSM 3 + +#define RFCOMM_CONN_TIMEOUT (HZ * 30) +#define RFCOMM_DISC_TIMEOUT (HZ * 20) +#define RFCOMM_AUTH_TIMEOUT (HZ * 25) +#define RFCOMM_IDLE_TIMEOUT (HZ * 2) + +#define RFCOMM_DEFAULT_MTU 127 +#define RFCOMM_DEFAULT_CREDITS 7 + +#define RFCOMM_MAX_L2CAP_MTU 1013 +#define RFCOMM_MAX_CREDITS 40 + +#define RFCOMM_SKB_HEAD_RESERVE 8 +#define RFCOMM_SKB_TAIL_RESERVE 2 +#define RFCOMM_SKB_RESERVE (RFCOMM_SKB_HEAD_RESERVE + RFCOMM_SKB_TAIL_RESERVE) + +#define RFCOMM_SABM 0x2f +#define RFCOMM_DISC 0x43 +#define RFCOMM_UA 0x63 +#define RFCOMM_DM 0x0f +#define RFCOMM_UIH 0xef + +#define RFCOMM_TEST 0x08 +#define RFCOMM_FCON 0x28 +#define RFCOMM_FCOFF 0x18 +#define RFCOMM_MSC 0x38 +#define RFCOMM_RPN 0x24 +#define RFCOMM_RLS 0x14 +#define RFCOMM_PN 0x20 +#define RFCOMM_NSC 0x04 + +#define RFCOMM_V24_FC 0x02 +#define RFCOMM_V24_RTC 0x04 +#define RFCOMM_V24_RTR 0x08 +#define RFCOMM_V24_IC 0x40 +#define RFCOMM_V24_DV 0x80 + +#define RFCOMM_RPN_BR_2400 0x0 +#define RFCOMM_RPN_BR_4800 0x1 +#define RFCOMM_RPN_BR_7200 0x2 +#define RFCOMM_RPN_BR_9600 0x3 +#define RFCOMM_RPN_BR_19200 0x4 +#define RFCOMM_RPN_BR_38400 0x5 +#define RFCOMM_RPN_BR_57600 0x6 +#define RFCOMM_RPN_BR_115200 0x7 +#define RFCOMM_RPN_BR_230400 0x8 + +#define RFCOMM_RPN_DATA_5 0x0 +#define RFCOMM_RPN_DATA_6 0x1 +#define RFCOMM_RPN_DATA_7 0x2 +#define RFCOMM_RPN_DATA_8 0x3 + +#define RFCOMM_RPN_STOP_1 0 +#define RFCOMM_RPN_STOP_15 1 + +#define RFCOMM_RPN_PARITY_NONE 0x0 +#define RFCOMM_RPN_PARITY_ODD 0x1 +#define RFCOMM_RPN_PARITY_EVEN 0x3 +#define RFCOMM_RPN_PARITY_MARK 0x5 +#define RFCOMM_RPN_PARITY_SPACE 0x7 + +#define RFCOMM_RPN_FLOW_NONE 0x00 + +#define RFCOMM_RPN_XON_CHAR 0x11 +#define RFCOMM_RPN_XOFF_CHAR 0x13 + +#define RFCOMM_RPN_PM_BITRATE 0x0001 +#define RFCOMM_RPN_PM_DATA 0x0002 +#define RFCOMM_RPN_PM_STOP 0x0004 +#define RFCOMM_RPN_PM_PARITY 0x0008 +#define RFCOMM_RPN_PM_PARITY_TYPE 0x0010 +#define RFCOMM_RPN_PM_XON 0x0020 +#define RFCOMM_RPN_PM_XOFF 0x0040 +#define RFCOMM_RPN_PM_FLOW 0x3F00 + +#define RFCOMM_RPN_PM_ALL 0x3F7F + +struct rfcomm_hdr { + u8 addr; + u8 ctrl; + u8 len; /* Actual size can be 2 bytes */ +} __packed; + +struct rfcomm_cmd { + u8 addr; + u8 ctrl; + u8 len; + u8 fcs; +} __packed; + +struct rfcomm_mcc { + u8 type; + u8 len; +} __packed; + +struct rfcomm_pn { + u8 dlci; + u8 flow_ctrl; + u8 priority; + u8 ack_timer; + __le16 mtu; + u8 max_retrans; + u8 credits; +} __packed; + +struct rfcomm_rpn { + u8 dlci; + u8 bit_rate; + u8 line_settings; + u8 flow_ctrl; + u8 xon_char; + u8 xoff_char; + __le16 param_mask; +} __packed; + +struct rfcomm_rls { + u8 dlci; + u8 status; +} __packed; + +struct rfcomm_msc { + u8 dlci; + u8 v24_sig; +} __packed; + +/* ---- Core structures, flags etc ---- */ + +struct rfcomm_session { + struct list_head list; + struct socket *sock; + struct timer_list timer; + unsigned long state; + unsigned long flags; + atomic_t refcnt; + int initiator; + + /* Default DLC parameters */ + int cfc; + uint mtu; + + struct list_head dlcs; +}; + +struct rfcomm_dlc { + struct list_head list; + struct rfcomm_session *session; + struct sk_buff_head tx_queue; + struct timer_list timer; + + spinlock_t lock; + unsigned long state; + unsigned long flags; + atomic_t refcnt; + u8 dlci; + u8 addr; + u8 priority; + u8 v24_sig; + u8 remote_v24_sig; + u8 mscex; + u8 out; + u8 sec_level; + u8 role_switch; + u32 defer_setup; + + uint mtu; + uint cfc; + uint rx_credits; + uint tx_credits; + + void *owner; + + void (*data_ready)(struct rfcomm_dlc *d, struct sk_buff *skb); + void (*state_change)(struct rfcomm_dlc *d, int err); + void (*modem_status)(struct rfcomm_dlc *d, u8 v24_sig); +}; + +/* DLC and session flags */ +#define RFCOMM_RX_THROTTLED 0 +#define RFCOMM_TX_THROTTLED 1 +#define RFCOMM_TIMED_OUT 2 +#define RFCOMM_MSC_PENDING 3 +#define RFCOMM_SEC_PENDING 4 +#define RFCOMM_AUTH_PENDING 5 +#define RFCOMM_AUTH_ACCEPT 6 +#define RFCOMM_AUTH_REJECT 7 +#define RFCOMM_DEFER_SETUP 8 +#define RFCOMM_ENC_DROP 9 + +/* Scheduling flags and events */ +#define RFCOMM_SCHED_WAKEUP 31 + +/* MSC exchange flags */ +#define RFCOMM_MSCEX_TX 1 +#define RFCOMM_MSCEX_RX 2 +#define RFCOMM_MSCEX_OK (RFCOMM_MSCEX_TX + RFCOMM_MSCEX_RX) + +/* CFC states */ +#define RFCOMM_CFC_UNKNOWN -1 +#define RFCOMM_CFC_DISABLED 0 +#define RFCOMM_CFC_ENABLED RFCOMM_MAX_CREDITS + +/* ---- RFCOMM SEND RPN ---- */ +int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci, + u8 bit_rate, u8 data_bits, u8 stop_bits, + u8 parity, u8 flow_ctrl_settings, + u8 xon_char, u8 xoff_char, u16 param_mask); + +/* ---- RFCOMM DLCs (channels) ---- */ +struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio); +void rfcomm_dlc_free(struct rfcomm_dlc *d); +int rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst, + u8 channel); +int rfcomm_dlc_close(struct rfcomm_dlc *d, int reason); +int rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb); +int rfcomm_dlc_set_modem_status(struct rfcomm_dlc *d, u8 v24_sig); +int rfcomm_dlc_get_modem_status(struct rfcomm_dlc *d, u8 *v24_sig); +void rfcomm_dlc_accept(struct rfcomm_dlc *d); + +#define rfcomm_dlc_lock(d) spin_lock(&d->lock) +#define rfcomm_dlc_unlock(d) spin_unlock(&d->lock) + +static inline void rfcomm_dlc_hold(struct rfcomm_dlc *d) +{ + atomic_inc(&d->refcnt); +} + +static inline void rfcomm_dlc_put(struct rfcomm_dlc *d) +{ + if (atomic_dec_and_test(&d->refcnt)) + rfcomm_dlc_free(d); +} + +extern void __rfcomm_dlc_throttle(struct rfcomm_dlc *d); +extern void __rfcomm_dlc_unthrottle(struct rfcomm_dlc *d); + +static inline void rfcomm_dlc_throttle(struct rfcomm_dlc *d) +{ + if (!test_and_set_bit(RFCOMM_RX_THROTTLED, &d->flags)) + __rfcomm_dlc_throttle(d); +} + +static inline void rfcomm_dlc_unthrottle(struct rfcomm_dlc *d) +{ + if (test_and_clear_bit(RFCOMM_RX_THROTTLED, &d->flags)) + __rfcomm_dlc_unthrottle(d); +} + +/* ---- RFCOMM sessions ---- */ +void rfcomm_session_getaddr(struct rfcomm_session *s, bdaddr_t *src, + bdaddr_t *dst); + +static inline void rfcomm_session_hold(struct rfcomm_session *s) +{ + atomic_inc(&s->refcnt); +} + +/* ---- RFCOMM sockets ---- */ +struct sockaddr_rc { + sa_family_t rc_family; + bdaddr_t rc_bdaddr; + u8 rc_channel; +}; + +#define RFCOMM_CONNINFO 0x02 +struct rfcomm_conninfo { + __u16 hci_handle; + __u8 dev_class[3]; +}; + +#define RFCOMM_LM 0x03 +#define RFCOMM_LM_MASTER 0x0001 +#define RFCOMM_LM_AUTH 0x0002 +#define RFCOMM_LM_ENCRYPT 0x0004 +#define RFCOMM_LM_TRUSTED 0x0008 +#define RFCOMM_LM_RELIABLE 0x0010 +#define RFCOMM_LM_SECURE 0x0020 + +#define rfcomm_pi(sk) ((struct rfcomm_pinfo *) sk) + +struct rfcomm_pinfo { + struct bt_sock bt; + struct rfcomm_dlc *dlc; + u8 channel; + u8 sec_level; + u8 role_switch; +}; + +int rfcomm_init_sockets(void); +void rfcomm_cleanup_sockets(void); + +int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, + struct rfcomm_dlc **d); + +/* ---- RFCOMM TTY ---- */ +#define RFCOMM_MAX_DEV 256 + +#define RFCOMMCREATEDEV _IOW('R', 200, int) +#define RFCOMMRELEASEDEV _IOW('R', 201, int) +#define RFCOMMGETDEVLIST _IOR('R', 210, int) +#define RFCOMMGETDEVINFO _IOR('R', 211, int) +#define RFCOMMSTEALDLC _IOW('R', 220, int) + +#define RFCOMM_REUSE_DLC 0 +#define RFCOMM_RELEASE_ONHUP 1 +#define RFCOMM_HANGUP_NOW 2 +#define RFCOMM_TTY_ATTACHED 3 +#define RFCOMM_TTY_RELEASED 4 + +struct rfcomm_dev_req { + s16 dev_id; + u32 flags; + bdaddr_t src; + bdaddr_t dst; + u8 channel; +}; + +struct rfcomm_dev_info { + s16 id; + u32 flags; + u16 state; + bdaddr_t src; + bdaddr_t dst; + u8 channel; +}; + +struct rfcomm_dev_list_req { + u16 dev_num; + struct rfcomm_dev_info dev_info[0]; +}; + +int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg); + +#ifdef CONFIG_BT_RFCOMM_TTY +int rfcomm_init_ttys(void); +void rfcomm_cleanup_ttys(void); +#else +static inline int rfcomm_init_ttys(void) +{ + return 0; +} +static inline void rfcomm_cleanup_ttys(void) +{ +} +#endif +#endif /* __RFCOMM_H */ diff --git a/include/compat/net/bluetooth/smp.h b/include/compat/net/bluetooth/smp.h new file mode 100755 index 0000000..15b97d5 --- /dev/null +++ b/include/compat/net/bluetooth/smp.h @@ -0,0 +1,140 @@ +/* + BlueZ - Bluetooth protocol stack for Linux + Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation; + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. + IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY + CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + + ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, + COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS + SOFTWARE IS DISCLAIMED. +*/ + +#ifndef __SMP_H +#define __SMP_H + +struct smp_command_hdr { + __u8 code; +} __packed; + +#define SMP_CMD_PAIRING_REQ 0x01 +#define SMP_CMD_PAIRING_RSP 0x02 +struct smp_cmd_pairing { + __u8 io_capability; + __u8 oob_flag; + __u8 auth_req; + __u8 max_key_size; + __u8 init_key_dist; + __u8 resp_key_dist; +} __packed; + +#define SMP_IO_DISPLAY_ONLY 0x00 +#define SMP_IO_DISPLAY_YESNO 0x01 +#define SMP_IO_KEYBOARD_ONLY 0x02 +#define SMP_IO_NO_INPUT_OUTPUT 0x03 +#define SMP_IO_KEYBOARD_DISPLAY 0x04 + +#define SMP_OOB_NOT_PRESENT 0x00 +#define SMP_OOB_PRESENT 0x01 + +#define SMP_DIST_ENC_KEY 0x01 +#define SMP_DIST_ID_KEY 0x02 +#define SMP_DIST_SIGN 0x04 + +#define SMP_AUTH_NONE 0x00 +#define SMP_AUTH_BONDING 0x01 +#define SMP_AUTH_MITM 0x04 + +#define SMP_CMD_PAIRING_CONFIRM 0x03 +struct smp_cmd_pairing_confirm { + __u8 confirm_val[16]; +} __packed; + +#define SMP_CMD_PAIRING_RANDOM 0x04 +struct smp_cmd_pairing_random { + __u8 rand_val[16]; +} __packed; + +#define SMP_CMD_PAIRING_FAIL 0x05 +struct smp_cmd_pairing_fail { + __u8 reason; +} __packed; + +#define SMP_CMD_ENCRYPT_INFO 0x06 +struct smp_cmd_encrypt_info { + __u8 ltk[16]; +} __packed; + +#define SMP_CMD_MASTER_IDENT 0x07 +struct smp_cmd_master_ident { + __u16 ediv; + __u8 rand[8]; +} __packed; + +#define SMP_CMD_IDENT_INFO 0x08 +struct smp_cmd_ident_info { + __u8 irk[16]; +} __packed; + +#define SMP_CMD_IDENT_ADDR_INFO 0x09 +struct smp_cmd_ident_addr_info { + __u8 addr_type; + bdaddr_t bdaddr; +} __packed; + +#define SMP_CMD_SIGN_INFO 0x0a +struct smp_cmd_sign_info { + __u8 csrk[16]; +} __packed; + +#define SMP_CMD_SECURITY_REQ 0x0b +struct smp_cmd_security_req { + __u8 auth_req; +} __packed; + +#define SMP_PASSKEY_ENTRY_FAILED 0x01 +#define SMP_OOB_NOT_AVAIL 0x02 +#define SMP_AUTH_REQUIREMENTS 0x03 +#define SMP_CONFIRM_FAILED 0x04 +#define SMP_PAIRING_NOTSUPP 0x05 +#define SMP_ENC_KEY_SIZE 0x06 +#define SMP_CMD_NOTSUPP 0x07 +#define SMP_UNSPECIFIED 0x08 +#define SMP_REPEATED_ATTEMPTS 0x09 + +#define SMP_MIN_ENC_KEY_SIZE 7 +#define SMP_MAX_ENC_KEY_SIZE 16 + +struct smp_chan { + struct l2cap_conn *conn; + u8 preq[7]; /* SMP Pairing Request */ + u8 prsp[7]; /* SMP Pairing Response */ + u8 prnd[16]; /* SMP Pairing Random (local) */ + u8 rrnd[16]; /* SMP Pairing Random (remote) */ + u8 pcnf[16]; /* SMP Pairing Confirm */ + u8 tk[16]; /* SMP Temporary Key */ + u8 smp_key_size; + struct crypto_blkcipher *tfm; + struct work_struct confirm; + struct work_struct random; + +}; + +/* SMP Commands */ +int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level); +int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb); +int smp_distribute_keys(struct l2cap_conn *conn, __u8 force); + +void smp_chan_destroy(struct l2cap_conn *conn); + +#endif /* __SMP_H */ diff --git a/include/compat/net/cfg80211-wext.h b/include/compat/net/cfg80211-wext.h new file mode 100755 index 0000000..25baddc --- /dev/null +++ b/include/compat/net/cfg80211-wext.h @@ -0,0 +1,55 @@ +#ifndef __NET_CFG80211_WEXT_H +#define __NET_CFG80211_WEXT_H +/* + * 802.11 device and configuration interface -- wext handlers + * + * Copyright 2006-2010 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +/* + * Temporary wext handlers & helper functions + * + * These are used only by drivers that aren't yet fully + * converted to cfg80211. + */ +int cfg80211_wext_giwname(struct net_device *dev, + struct iw_request_info *info, + char *name, char *extra); +int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info, + u32 *mode, char *extra); +int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info, + u32 *mode, char *extra); +int cfg80211_wext_siwscan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); +int cfg80211_wext_giwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_giwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); + +#endif /* __NET_CFG80211_WEXT_H */ diff --git a/include/compat/net/cfg80211.h b/include/compat/net/cfg80211.h new file mode 100755 index 0000000..881a0d9 --- /dev/null +++ b/include/compat/net/cfg80211.h @@ -0,0 +1,3407 @@ +#ifndef __NET_CFG80211_H +#define __NET_CFG80211_H +/* + * 802.11 device and configuration interface + * + * Copyright 2006-2010 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: Introduction + * + * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges + * userspace and drivers, and offers some utility functionality associated + * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used + * by all modern wireless drivers in Linux, so that they offer a consistent + * API through nl80211. For backward compatibility, cfg80211 also offers + * wireless extensions to userspace, but hides them from drivers completely. + * + * Additionally, cfg80211 contains code to help enforce regulatory spectrum + * use restrictions. + */ + + +/** + * DOC: Device registration + * + * In order for a driver to use cfg80211, it must register the hardware device + * with cfg80211. This happens through a number of hardware capability structs + * described below. + * + * The fundamental structure for each device is the 'wiphy', of which each + * instance describes a physical wireless device connected to the system. Each + * such wiphy can have zero, one, or many virtual interfaces associated with + * it, which need to be identified as such by pointing the network interface's + * @ieee80211_ptr pointer to a &struct wireless_dev which further describes + * the wireless part of the interface, normally this struct is embedded in the + * network interface's private data area. Drivers can optionally allow creating + * or destroying virtual interfaces on the fly, but without at least one or the + * ability to create some the wireless device isn't useful. + * + * Each wiphy structure contains device capability information, and also has + * a pointer to the various operations the driver offers. The definitions and + * structures here describe these capabilities in detail. + */ + +/* + * wireless hardware capability structures + */ + +/** + * enum ieee80211_band - supported frequency bands + * + * The bands are assigned this way because the supported + * bitrates differ in these bands. + * + * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band + * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) + * @IEEE80211_NUM_BANDS: number of defined bands + */ +enum ieee80211_band { + IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, + IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, + + /* keep last */ + IEEE80211_NUM_BANDS +}; + +/** + * enum ieee80211_channel_flags - channel flags + * + * Channel flags set by the regulatory control code. + * + * @IEEE80211_CHAN_DISABLED: This channel is disabled. + * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted + * on this channel. + * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel + * is not permitted. + */ +enum ieee80211_channel_flags { + IEEE80211_CHAN_DISABLED = 1<<0, + IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, + IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_HT40PLUS = 1<<4, + IEEE80211_CHAN_NO_HT40MINUS = 1<<5, +}; + +#define IEEE80211_CHAN_NO_HT40 \ + (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + +/** + * struct ieee80211_channel - channel definition + * + * This structure describes a single channel for use + * with cfg80211. + * + * @center_freq: center frequency in MHz + * @hw_value: hardware-specific value for the channel + * @flags: channel flags from &enum ieee80211_channel_flags. + * @orig_flags: channel flags at registration time, used by regulatory + * code to support devices with additional restrictions + * @band: band this channel belongs to. + * @max_antenna_gain: maximum antenna gain in dBi + * @max_power: maximum transmission power (in dBm) + * @beacon_found: helper to regulatory code to indicate when a beacon + * has been found on this channel. Use regulatory_hint_found_beacon() + * to enable this, this is useful only on 5 GHz band. + * @orig_mag: internal use + * @orig_mpwr: internal use + */ +struct ieee80211_channel { + enum ieee80211_band band; + u16 center_freq; + u16 hw_value; + u32 flags; + int max_antenna_gain; + int max_power; + bool beacon_found; + u32 orig_flags; + int orig_mag, orig_mpwr; +}; + +/** + * enum ieee80211_rate_flags - rate flags + * + * Hardware/specification flags for rates. These are structured + * in a way that allows using the same bitrate structure for + * different bands/PHY modes. + * + * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short + * preamble on this bitrate; only relevant in 2.4GHz band and + * with CCK rates. + * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate + * when used with 802.11a (on the 5 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate + * when used with 802.11b (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate + * when used with 802.11g (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. + */ +enum ieee80211_rate_flags { + IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, + IEEE80211_RATE_MANDATORY_A = 1<<1, + IEEE80211_RATE_MANDATORY_B = 1<<2, + IEEE80211_RATE_MANDATORY_G = 1<<3, + IEEE80211_RATE_ERP_G = 1<<4, +}; + +/** + * struct ieee80211_rate - bitrate definition + * + * This structure describes a bitrate that an 802.11 PHY can + * operate with. The two values @hw_value and @hw_value_short + * are only for driver use when pointers to this structure are + * passed around. + * + * @flags: rate-specific flags + * @bitrate: bitrate in units of 100 Kbps + * @hw_value: driver/hardware value for this rate + * @hw_value_short: driver/hardware value for this rate when + * short preamble is used + */ +struct ieee80211_rate { + u32 flags; + u16 bitrate; + u16 hw_value, hw_value_short; +}; + +/** + * struct ieee80211_sta_ht_cap - STA's HT capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11n HT capabilities for an STA. + * + * @ht_supported: is HT supported by the STA + * @cap: HT capabilities map as described in 802.11n spec + * @ampdu_factor: Maximum A-MPDU length factor + * @ampdu_density: Minimum A-MPDU spacing + * @mcs: Supported MCS rates + */ +struct ieee80211_sta_ht_cap { + u16 cap; /* use IEEE80211_HT_CAP_ */ + bool ht_supported; + u8 ampdu_factor; + u8 ampdu_density; + struct ieee80211_mcs_info mcs; +}; + +/** + * struct ieee80211_supported_band - frequency band definition + * + * This structure describes a frequency band a wiphy + * is able to operate in. + * + * @channels: Array of channels the hardware can operate in + * in this band. + * @band: the band this structure represents + * @n_channels: Number of channels in @channels + * @bitrates: Array of bitrates the hardware can operate with + * in this band. Must be sorted to give a valid "supported + * rates" IE, i.e. CCK rates first, then OFDM. + * @n_bitrates: Number of bitrates in @bitrates + * @ht_cap: HT capabilities in this band + */ +struct ieee80211_supported_band { + struct ieee80211_channel *channels; + struct ieee80211_rate *bitrates; + enum ieee80211_band band; + int n_channels; + int n_bitrates; + struct ieee80211_sta_ht_cap ht_cap; +}; + +/* + * Wireless hardware/device configuration structures and methods + */ + +/** + * DOC: Actions and configuration + * + * Each wireless device and each virtual interface offer a set of configuration + * operations and other actions that are invoked by userspace. Each of these + * actions is described in the operations structure, and the parameters these + * operations use are described separately. + * + * Additionally, some operations are asynchronous and expect to get status + * information via some functions that drivers need to call. + * + * Scanning and BSS list handling with its associated functionality is described + * in a separate chapter. + */ + +/** + * struct vif_params - describes virtual interface parameters + * @use_4addr: use 4-address frames + */ +struct vif_params { + int use_4addr; +}; + +/** + * struct key_params - key information + * + * Information about a key + * + * @key: key material + * @key_len: length of key material + * @cipher: cipher suite selector + * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used + * with the get_key() callback, must be in little endian, + * length given by @seq_len. + * @seq_len: length of @seq. + */ +struct key_params { + u8 *key; + u8 *seq; + int key_len; + int seq_len; + u32 cipher; +}; + +/** + * enum survey_info_flags - survey information flags + * + * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in + * @SURVEY_INFO_IN_USE: channel is currently being used + * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in + * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in + * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in + * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in + * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in + * + * Used by the driver to indicate which info in &struct survey_info + * it has filled in during the get_survey(). + */ +enum survey_info_flags { + SURVEY_INFO_NOISE_DBM = 1<<0, + SURVEY_INFO_IN_USE = 1<<1, + SURVEY_INFO_CHANNEL_TIME = 1<<2, + SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3, + SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4, + SURVEY_INFO_CHANNEL_TIME_RX = 1<<5, + SURVEY_INFO_CHANNEL_TIME_TX = 1<<6, +}; + +/** + * struct survey_info - channel survey response + * + * @channel: the channel this survey record reports, mandatory + * @filled: bitflag of flags from &enum survey_info_flags + * @noise: channel noise in dBm. This and all following fields are + * optional + * @channel_time: amount of time in ms the radio spent on the channel + * @channel_time_busy: amount of time the primary channel was sensed busy + * @channel_time_ext_busy: amount of time the extension channel was sensed busy + * @channel_time_rx: amount of time the radio spent receiving data + * @channel_time_tx: amount of time the radio spent transmitting data + * + * Used by dump_survey() to report back per-channel survey information. + * + * This structure can later be expanded with things like + * channel duty cycle etc. + */ +struct survey_info { + struct ieee80211_channel *channel; + u64 channel_time; + u64 channel_time_busy; + u64 channel_time_ext_busy; + u64 channel_time_rx; + u64 channel_time_tx; + u32 filled; + s8 noise; +}; + +/** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; +}; + +/** + * struct beacon_parameters - beacon parameters + * + * Used to configure the beacon for an interface. + * + * @head: head portion of beacon (before TIM IE) + * or %NULL if not changed + * @tail: tail portion of beacon (after TIM IE) + * or %NULL if not changed + * @interval: beacon interval or zero if not changed + * @dtim_period: DTIM period or zero if not changed + * @head_len: length of @head + * @tail_len: length of @tail + * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from + * user space) + * @ssid_len: length of @ssid + * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) + * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL + * @beacon_ies_len: length of beacon_ies in octets + * @proberesp_ies: extra information element(s) to add into Probe Response + * frames or %NULL + * @proberesp_ies_len: length of proberesp_ies in octets + * @assocresp_ies: extra information element(s) to add into (Re)Association + * Response frames or %NULL + * @assocresp_ies_len: length of assocresp_ies in octets + * @probe_resp_len: length of probe response template (@probe_resp) + * @probe_resp: probe response template (AP mode only) + */ +struct beacon_parameters { + u8 *head, *tail; + int interval, dtim_period; + int head_len, tail_len; + const u8 *ssid; + size_t ssid_len; + enum nl80211_hidden_ssid hidden_ssid; + struct cfg80211_crypto_settings crypto; + bool privacy; + enum nl80211_auth_type auth_type; + const u8 *beacon_ies; + size_t beacon_ies_len; + const u8 *proberesp_ies; + size_t proberesp_ies_len; + const u8 *assocresp_ies; + size_t assocresp_ies_len; + int probe_resp_len; + u8 *probe_resp; +}; + +/** + * enum plink_action - actions to perform in mesh peers + * + * @PLINK_ACTION_INVALID: action 0 is reserved + * @PLINK_ACTION_OPEN: start mesh peer link establishment + * @PLINK_ACTION_BLOCK: block traffic from this mesh peer + */ +enum plink_actions { + PLINK_ACTION_INVALID, + PLINK_ACTION_OPEN, + PLINK_ACTION_BLOCK, +}; + +/** + * enum station_parameters_apply_mask - station parameter values to apply + * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * + * Not all station parameters have in-band "no change" signalling, + * for those that don't these flags will are used. + */ +enum station_parameters_apply_mask { + STATION_PARAM_APPLY_UAPSD = BIT(0), +}; + +/** + * struct station_parameters - station parameters + * + * Used to change and create a new station. + * + * @vlan: vlan interface station should belong to + * @supported_rates: supported rates in IEEE 802.11 format + * (or NULL for no change) + * @supported_rates_len: number of supported rates + * @sta_flags_mask: station flags that changed + * (bitmask of BIT(NL80211_STA_FLAG_...)) + * @sta_flags_set: station flags values + * (bitmask of BIT(NL80211_STA_FLAG_...)) + * @listen_interval: listen interval or -1 for no change + * @aid: AID or zero for no change + * @plink_action: plink action to take + * @plink_state: set the peer link state for a station + * @ht_capa: HT capabilities of station + * @uapsd_queues: bitmap of queues configured for uapsd. same format + * as the AC bitmap in the QoS info field + * @max_sp: max Service Period. same format as the MAX_SP in the + * QoS info field (but already shifted down) + * @sta_modify_mask: bitmap indicating which parameters changed + * (for those that don't have a natural "no change" value), + * see &enum station_parameters_apply_mask + */ +struct station_parameters { + u8 *supported_rates; + struct net_device *vlan; + u32 sta_flags_mask, sta_flags_set; + u32 sta_modify_mask; + int listen_interval; + u16 aid; + u8 supported_rates_len; + u8 plink_action; + u8 plink_state; + struct ieee80211_ht_cap *ht_capa; + u8 uapsd_queues; + u8 max_sp; +}; + +/** + * enum station_info_flags - station information flags + * + * Used by the driver to indicate which info in &struct station_info + * it has filled in during get_station() or dump_station(). + * + * @STATION_INFO_INACTIVE_TIME: @inactive_time filled + * @STATION_INFO_RX_BYTES: @rx_bytes filled + * @STATION_INFO_TX_BYTES: @tx_bytes filled + * @STATION_INFO_LLID: @llid filled + * @STATION_INFO_PLID: @plid filled + * @STATION_INFO_PLINK_STATE: @plink_state filled + * @STATION_INFO_SIGNAL: @signal filled + * @STATION_INFO_TX_BITRATE: @txrate fields are filled + * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) + * @STATION_INFO_RX_PACKETS: @rx_packets filled + * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_TX_RETRIES: @tx_retries filled + * @STATION_INFO_TX_FAILED: @tx_failed filled + * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled + * @STATION_INFO_SIGNAL_AVG: @signal_avg filled + * @STATION_INFO_RX_BITRATE: @rxrate fields are filled + * @STATION_INFO_BSS_PARAM: @bss_param filled + * @STATION_INFO_CONNECTED_TIME: @connected_time filled + * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled + * @STATION_INFO_STA_FLAGS: @sta_flags filled + */ +enum station_info_flags { + STATION_INFO_INACTIVE_TIME = 1<<0, + STATION_INFO_RX_BYTES = 1<<1, + STATION_INFO_TX_BYTES = 1<<2, + STATION_INFO_LLID = 1<<3, + STATION_INFO_PLID = 1<<4, + STATION_INFO_PLINK_STATE = 1<<5, + STATION_INFO_SIGNAL = 1<<6, + STATION_INFO_TX_BITRATE = 1<<7, + STATION_INFO_RX_PACKETS = 1<<8, + STATION_INFO_TX_PACKETS = 1<<9, + STATION_INFO_TX_RETRIES = 1<<10, + STATION_INFO_TX_FAILED = 1<<11, + STATION_INFO_RX_DROP_MISC = 1<<12, + STATION_INFO_SIGNAL_AVG = 1<<13, + STATION_INFO_RX_BITRATE = 1<<14, + STATION_INFO_BSS_PARAM = 1<<15, + STATION_INFO_CONNECTED_TIME = 1<<16, + STATION_INFO_ASSOC_REQ_IES = 1<<17, + STATION_INFO_STA_FLAGS = 1<<18 +}; + +/** + * enum station_info_rate_flags - bitrate info flags + * + * Used by the driver to indicate the specific rate transmission + * type for 802.11n transmissions. + * + * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled + * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission + * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval + */ +enum rate_info_flags { + RATE_INFO_FLAGS_MCS = 1<<0, + RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1, + RATE_INFO_FLAGS_SHORT_GI = 1<<2, +}; + +/** + * struct rate_info - bitrate information + * + * Information about a receiving or transmitting bitrate + * + * @flags: bitflag of flags from &enum rate_info_flags + * @mcs: mcs index if struct describes a 802.11n bitrate + * @legacy: bitrate in 100kbit/s for 802.11abg + */ +struct rate_info { + u8 flags; + u8 mcs; + u16 legacy; +}; + +/** + * enum station_info_rate_flags - bitrate info flags + * + * Used by the driver to indicate the specific rate transmission + * type for 802.11n transmissions. + * + * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled + * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled + * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled + */ +enum bss_param_flags { + BSS_PARAM_FLAGS_CTS_PROT = 1<<0, + BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1, + BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2, +}; + +/** + * struct sta_bss_parameters - BSS parameters for the attached station + * + * Information about the currently associated BSS + * + * @flags: bitflag of flags from &enum bss_param_flags + * @dtim_period: DTIM period for the BSS + * @beacon_interval: beacon interval + */ +struct sta_bss_parameters { + u8 flags; + u8 dtim_period; + u16 beacon_interval; +}; + +/** + * struct station_info - station information + * + * Station information filled by driver for get_station() and dump_station. + * + * @filled: bitflag of flags from &enum station_info_flags + * @connected_time: time(in secs) since a station is last connected + * @inactive_time: time since last station activity (tx/rx) in milliseconds + * @rx_bytes: bytes received from this station + * @tx_bytes: bytes transmitted to this station + * @llid: mesh local link id + * @plid: mesh peer link id + * @plink_state: mesh peer link state + * @signal: signal strength of last received packet in dBm + * @signal_avg: signal strength average in dBm + * @txrate: current unicast bitrate from this station + * @rxrate: current unicast bitrate to this station + * @rx_packets: packets received from this station + * @tx_packets: packets transmitted to this station + * @tx_retries: cumulative retry counts + * @tx_failed: number of failed transmissions (retries exceeded, no ACK) + * @rx_dropped_misc: Dropped for un-specified reason. + * @bss_param: current BSS parameters + * @generation: generation number for nl80211 dumps. + * This number should increase every time the list of stations + * changes, i.e. when a station is added or removed, so that + * userspace can tell whether it got a consistent snapshot. + * @assoc_req_ies: IEs from (Re)Association Request. + * This is used only when in AP mode with drivers that do not use + * user space MLME/SME implementation. The information is provided for + * the cfg80211_new_sta() calls to notify user space of the IEs. + * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. + * @sta_flags: station flags mask & values + */ +struct station_info { + u32 filled; + u32 connected_time; + u32 inactive_time; + u32 rx_bytes; + u32 tx_bytes; + u16 llid; + u16 plid; + u8 plink_state; + s8 signal; + s8 signal_avg; + struct rate_info txrate; + struct rate_info rxrate; + u32 rx_packets; + u32 tx_packets; + u32 tx_retries; + u32 tx_failed; + u32 rx_dropped_misc; + struct sta_bss_parameters bss_param; + struct nl80211_sta_flag_update sta_flags; + + int generation; + + const u8 *assoc_req_ies; + size_t assoc_req_ies_len; + + /* + * Note: Add a new enum station_info_flags value for each new field and + * use it to check which fields are initialized. + */ +}; + +/** + * enum monitor_flags - monitor flags + * + * Monitor interface configuration flags. Note that these must be the bits + * according to the nl80211 flags. + * + * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS + * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @MONITOR_FLAG_CONTROL: pass control frames + * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering + * @MONITOR_FLAG_COOK_FRAMES: report frames after processing + */ +enum monitor_flags { + MONITOR_FLAG_FCSFAIL = 1<bss_priv_size bytes + */ +struct cfg80211_bss { + struct ieee80211_channel *channel; + + u8 bssid[ETH_ALEN]; + u64 tsf; + u16 beacon_interval; + u16 capability; + u8 *information_elements; + size_t len_information_elements; + u8 *beacon_ies; + size_t len_beacon_ies; + u8 *proberesp_ies; + size_t len_proberesp_ies; + + s32 signal; + + void (*free_priv)(struct cfg80211_bss *bss); + u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + +/** + * ieee80211_bss_get_ie - find IE with given ID + * @bss: the bss to search + * @ie: the IE ID + * Returns %NULL if not found. + */ +const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); + + +/** + * struct cfg80211_auth_request - Authentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * authentication. + * + * @bss: The BSS to authenticate with. + * @auth_type: Authentication type (algorithm) + * @ie: Extra IEs to add to Authentication frame or %NULL + * @ie_len: Length of ie buffer in octets + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication + * @local_state_change: This is a request for a local state only, i.e., no + * Authentication frame is to be transmitted and authentication state is + * to be changed without having to wait for a response from the peer STA + * (AP). + */ +struct cfg80211_auth_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + enum nl80211_auth_type auth_type; + const u8 *key; + u8 key_len, key_idx; + bool local_state_change; +}; + +/** + * struct cfg80211_assoc_request - (Re)Association request data + * + * This structure provides information needed to complete IEEE 802.11 + * (re)association. + * @bss: The BSS to associate with. + * @ie: Extra IEs to add to (Re)Association Request frame or %NULL + * @ie_len: Length of ie buffer in octets + * @use_mfp: Use management frame protection (IEEE 802.11w) in this association + * @crypto: crypto settings + * @prev_bssid: previous BSSID, if not %NULL use reassociate frame + */ +struct cfg80211_assoc_request { + struct cfg80211_bss *bss; + const u8 *ie, *prev_bssid; + size_t ie_len; + struct cfg80211_crypto_settings crypto; + bool use_mfp; +}; + +/** + * struct cfg80211_deauth_request - Deauthentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * deauthentication. + * + * @bss: the BSS to deauthenticate from + * @ie: Extra IEs to add to Deauthentication frame or %NULL + * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the deauthentication + * @local_state_change: This is a request for a local state only, i.e., no + * Deauthentication frame is to be transmitted. + */ +struct cfg80211_deauth_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + u16 reason_code; + bool local_state_change; +}; + +/** + * struct cfg80211_disassoc_request - Disassociation request data + * + * This structure provides information needed to complete IEEE 802.11 + * disassocation. + * + * @bss: the BSS to disassociate from + * @ie: Extra IEs to add to Disassociation frame or %NULL + * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the disassociation + * @local_state_change: This is a request for a local state only, i.e., no + * Disassociation frame is to be transmitted. + */ +struct cfg80211_disassoc_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + u16 reason_code; + bool local_state_change; +}; + +/** + * struct cfg80211_ibss_params - IBSS parameters + * + * This structure defines the IBSS parameters for the join_ibss() + * method. + * + * @ssid: The SSID, will always be non-null. + * @ssid_len: The length of the SSID, will always be non-zero. + * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not + * search for IBSSs with a different BSSID. + * @channel: The channel to use if no IBSS can be found to join. + * @channel_fixed: The channel should be fixed -- do not search for + * IBSSs to join on other channels. + * @ie: information element(s) to include in the beacon + * @ie_len: length of that + * @beacon_interval: beacon interval to use + * @privacy: this is a protected network, keys will be configured + * after joining + * @basic_rates: bitmap of basic rates to use when creating the IBSS + * @mcast_rate: per-band multicast rate index + 1 (0: disabled) + */ +struct cfg80211_ibss_params { + u8 *ssid; + u8 *bssid; + struct ieee80211_channel *channel; + u8 *ie; + u8 ssid_len, ie_len; + u16 beacon_interval; + u32 basic_rates; + bool channel_fixed; + bool privacy; + int mcast_rate[IEEE80211_NUM_BANDS]; +}; + +/** + * struct cfg80211_connect_params - Connection parameters + * + * This structure provides information needed to complete IEEE 802.11 + * authentication and association. + * + * @channel: The channel to use or %NULL if not specified (auto-select based + * on scan results) + * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan + * results) + * @ssid: SSID + * @ssid_len: Length of ssid in octets + * @auth_type: Authentication type (algorithm) + * @ie: IEs for association request + * @ie_len: Length of assoc_ie in octets + * @privacy: indicates whether privacy-enabled APs should be used + * @crypto: crypto settings + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication + */ +struct cfg80211_connect_params { + struct ieee80211_channel *channel; + u8 *bssid; + u8 *ssid; + size_t ssid_len; + enum nl80211_auth_type auth_type; + u8 *ie; + size_t ie_len; + bool privacy; + struct cfg80211_crypto_settings crypto; + const u8 *key; + u8 key_len, key_idx; +}; + +/** + * enum wiphy_params_flags - set_wiphy_params bitfield values + * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed + * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed + * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed + * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed + */ +enum wiphy_params_flags { + WIPHY_PARAM_RETRY_SHORT = 1 << 0, + WIPHY_PARAM_RETRY_LONG = 1 << 1, + WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, + WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, + WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, +}; + +/* + * cfg80211_bitrate_mask - masks for bitrate control + */ +struct cfg80211_bitrate_mask { + struct { + u32 legacy; + /* TODO: add support for masking MCS rates; e.g.: */ + /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */ + } control[IEEE80211_NUM_BANDS]; +}; +/** + * struct cfg80211_pmksa - PMK Security Association + * + * This structure is passed to the set/del_pmksa() method for PMKSA + * caching. + * + * @bssid: The AP's BSSID. + * @pmkid: The PMK material itself. + */ +struct cfg80211_pmksa { + u8 *bssid; + u8 *pmkid; +}; + +/** + * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern + * @mask: bitmask where to match pattern and where to ignore bytes, + * one bit per byte, in same format as nl80211 + * @pattern: bytes to match where bitmask is 1 + * @pattern_len: length of pattern (in bytes) + * + * Internal note: @mask and @pattern are allocated in one chunk of + * memory, free @mask only! + */ +struct cfg80211_wowlan_trig_pkt_pattern { + u8 *mask, *pattern; + int pattern_len; +}; + +/** + * struct cfg80211_wowlan - Wake on Wireless-LAN support info + * + * This structure defines the enabled WoWLAN triggers for the device. + * @any: wake up on any activity -- special trigger if device continues + * operating as normal during suspend + * @disconnect: wake up if getting disconnected + * @magic_pkt: wake up on receiving magic packet + * @patterns: wake up on receiving packet matching a pattern + * @n_patterns: number of patterns + * @gtk_rekey_failure: wake up on GTK rekey failure + * @eap_identity_req: wake up on EAP identity request packet + * @four_way_handshake: wake up on 4-way handshake + * @rfkill_release: wake up when rfkill is released + */ +struct cfg80211_wowlan { + bool any, disconnect, magic_pkt, gtk_rekey_failure, + eap_identity_req, four_way_handshake, + rfkill_release; + struct cfg80211_wowlan_trig_pkt_pattern *patterns; + int n_patterns; +}; + +/** + * struct cfg80211_gtk_rekey_data - rekey data + * @kek: key encryption key + * @kck: key confirmation key + * @replay_ctr: replay counter + */ +struct cfg80211_gtk_rekey_data { + u8 kek[NL80211_KEK_LEN]; + u8 kck[NL80211_KCK_LEN]; + u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; +}; + +/** + * struct cfg80211_ops - backend description for wireless configuration + * + * This struct is registered by fullmac card drivers and/or wireless stacks + * in order to handle configuration requests on their interfaces. + * + * All callbacks except where otherwise noted should return 0 + * on success or a negative error code. + * + * All operations are currently invoked under rtnl for consistency with the + * wireless extensions but this is subject to reevaluation as soon as this + * code is used more widely and we have a first user without wext. + * + * @suspend: wiphy device needs to be suspended. The variable @wow will + * be %NULL or contain the enabled Wake-on-Wireless triggers that are + * configured for the device. + * @resume: wiphy device needs to be resumed + * + * @add_virtual_intf: create a new virtual interface with the given name, + * must set the struct wireless_dev's iftype. Beware: You must create + * the new netdev in the wiphy's network namespace! Returns the netdev, + * or an ERR_PTR. + * + * @del_virtual_intf: remove the virtual interface determined by ifindex. + * + * @change_virtual_intf: change type/configuration of virtual interface, + * keep the struct wireless_dev's iftype updated. + * + * @add_key: add a key with the given parameters. @mac_addr will be %NULL + * when adding a group key. + * + * @get_key: get information about the key with the given parameters. + * @mac_addr will be %NULL when requesting information for a group + * key. All pointers given to the @callback function need not be valid + * after it returns. This function should return an error if it is + * not possible to retrieve the key, -ENOENT if it doesn't exist. + * + * @del_key: remove a key given the @mac_addr (%NULL for a group key) + * and @key_index, return -ENOENT if the key doesn't exist. + * + * @set_default_key: set the default key on an interface + * + * @set_default_mgmt_key: set the default management frame key on an interface + * + * @set_rekey_data: give the data necessary for GTK rekeying to the driver + * + * @add_beacon: Add a beacon with given parameters, @head, @interval + * and @dtim_period will be valid, @tail is optional. + * @set_beacon: Change the beacon parameters for an access point mode + * interface. This should reject the call when no beacon has been + * configured. + * @del_beacon: Remove beacon configuration and stop sending the beacon. + * + * @add_station: Add a new station. + * @del_station: Remove a station; @mac may be NULL to remove all stations. + * @change_station: Modify a given station. + * @get_station: get station information for the station identified by @mac + * @dump_station: dump station callback -- resume dump at index @idx + * + * @add_mpath: add a fixed mesh path + * @del_mpath: delete a given mesh path + * @change_mpath: change a given mesh path + * @get_mpath: get a mesh path for the given parameters + * @dump_mpath: dump mesh path callback -- resume dump at index @idx + * @join_mesh: join the mesh network with the specified parameters + * @leave_mesh: leave the current mesh network + * + * @get_mesh_config: Get the current mesh configuration + * + * @update_mesh_config: Update mesh parameters on a running mesh. + * The mask is a bitfield which tells us which parameters to + * set, and which to leave alone. + * + * @change_bss: Modify parameters for a given BSS. + * + * @set_txq_params: Set TX queue parameters + * + * @set_channel: Set channel for a given wireless interface. Some devices + * may support multi-channel operation (by channel hopping) so cfg80211 + * doesn't verify much. Note, however, that the passed netdev may be + * %NULL as well if the user requested changing the channel for the + * device itself, or for a monitor interface. + * @get_channel: Get the current operating channel, should return %NULL if + * there's no single defined operating channel if for example the + * device implements channel hopping for multi-channel virtual interfaces. + * + * @scan: Request to do a scan. If returning zero, the scan request is given + * the driver, and will be valid until passed to cfg80211_scan_done(). + * For scan results, call cfg80211_inform_bss(); you can call this outside + * the scan/scan_done bracket too. + * + * @auth: Request to authenticate with the specified peer + * @assoc: Request to (re)associate with the specified peer + * @deauth: Request to deauthenticate from the specified peer + * @disassoc: Request to disassociate from the specified peer + * + * @connect: Connect to the ESS with the specified parameters. When connected, + * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. + * If the connection fails for some reason, call cfg80211_connect_result() + * with the status from the AP. + * @disconnect: Disconnect from the BSS/ESS. + * + * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call + * cfg80211_ibss_joined(), also call that function when changing BSSID due + * to a merge. + * @leave_ibss: Leave the IBSS. + * + * @set_wiphy_params: Notify that wiphy parameters have changed; + * @changed bitfield (see &enum wiphy_params_flags) describes which values + * have changed. The actual parameter values are available in + * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful + * + * @set_wds_peer: set the WDS peer for a WDS interface + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state + * + * @dump_survey: get site survey information. + * + * @remain_on_channel: Request the driver to remain awake on the specified + * channel for the specified duration to complete an off-channel + * operation (e.g., public action frame exchange). When the driver is + * ready on the requested channel, it must indicate this with an event + * notification by calling cfg80211_ready_on_channel(). + * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. + * This allows the operation to be terminated prior to timeout based on + * the duration value. + * @mgmt_tx: Transmit a management frame. + * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management + * frame on another channel + * + * @testmode_cmd: run a test mode command + * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be + * used by the function, but 0 and 1 must not be touched. Additionally, + * return error codes other than -ENOBUFS and -ENOENT will terminate the + * dump and return to userspace with an error, so be careful. If any data + * was passed in from userspace then the data/len arguments will be present + * and point to the data contained in %NL80211_ATTR_TESTDATA. + * + * @set_bitrate_mask: set the bitrate mask configuration + * + * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac + * devices running firmwares capable of generating the (re) association + * RSN IE. It allows for faster roaming between WPA2 BSSIDs. + * @del_pmksa: Delete a cached PMKID. + * @flush_pmksa: Flush all cached PMKIDs. + * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 + * allows the driver to adjust the dynamic ps timeout value. + * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. + * @sched_scan_start: Tell the driver to start a scheduled scan. + * @sched_scan_stop: Tell the driver to stop an ongoing scheduled + * scan. The driver_initiated flag specifies whether the driver + * itself has informed that the scan has stopped. + * + * @mgmt_frame_register: Notify driver that a management frame type was + * registered. Note that this callback may not sleep, and cannot run + * concurrently with itself. + * + * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. + * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may + * reject TX/RX mask combinations they cannot support by returning -EINVAL + * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). + * + * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). + * + * @set_ringparam: Set tx and rx ring sizes. + * + * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tdls_mgmt: Transmit a TDLS management frame. + * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). + * + * @probe_client: probe an associated client, must return a cookie that it + * later passes to cfg80211_probe_status(). + * + * @notify_btcoex_inq_status: Notify the Bluetooth inquiry status in + * case of a Bleutooth co-ex device. + * + * @notify_btcoex_sco_status: Notify the Bluetooth SCO connection status in + * case of a Bluetooth co-ex device. + * + * @notify_btcoex_a2dp_status: Notify the Bluetooth A2DP connection status in + * case of a Bluetooth co-ex device. + * + * @notify_btcoex_acl_info: Notify the Bluetooth chip's ACL connction + * information + * + * @notify_btcoex_antenna_config: Notify the Bluetooth WiFi chip antenna + * configuration + * + * @notify_btcoex_bt_vendor: Notify the Bluetooth chip vendor in case of using + * different Bluetooth chip vendor + */ + +struct cfg80211_ops { + int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); + int (*resume)(struct wiphy *wiphy); + + struct net_device * (*add_virtual_intf)(struct wiphy *wiphy, + char *name, + enum nl80211_iftype type, + u32 *flags, + struct vif_params *params); + int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev); + int (*change_virtual_intf)(struct wiphy *wiphy, + struct net_device *dev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params); + + int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr, + struct key_params *params); + int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr, + void *cookie, + void (*callback)(void *cookie, struct key_params*)); + int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr); + int (*set_default_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index, bool unicast, bool multicast); + int (*set_default_mgmt_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index); + + int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev, + struct beacon_parameters *info); + int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev, + struct beacon_parameters *info); + int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev); + + + int (*add_station)(struct wiphy *wiphy, struct net_device *dev, + u8 *mac, struct station_parameters *params); + int (*del_station)(struct wiphy *wiphy, struct net_device *dev, + u8 *mac); + int (*change_station)(struct wiphy *wiphy, struct net_device *dev, + u8 *mac, struct station_parameters *params); + int (*get_station)(struct wiphy *wiphy, struct net_device *dev, + u8 *mac, struct station_info *sinfo); + int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, + int idx, u8 *mac, struct station_info *sinfo); + + int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst, u8 *next_hop); + int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst); + int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst, u8 *next_hop); + int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst, u8 *next_hop, + struct mpath_info *pinfo); + int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, + int idx, u8 *dst, u8 *next_hop, + struct mpath_info *pinfo); + int (*get_mesh_config)(struct wiphy *wiphy, + struct net_device *dev, + struct mesh_config *conf); + int (*update_mesh_config)(struct wiphy *wiphy, + struct net_device *dev, u32 mask, + const struct mesh_config *nconf); + int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, + const struct mesh_config *conf, + const struct mesh_setup *setup); + int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); + + int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, + struct bss_parameters *params); + + int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_txq_params *params); + + int (*set_channel)(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type); + + int (*scan)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_scan_request *request); + + int (*auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_auth_request *req); + int (*assoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_assoc_request *req); + int (*deauth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_deauth_request *req, + void *cookie); + int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_disassoc_request *req, + void *cookie); + + int (*connect)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme); + int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code); + + int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params); + int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum nl80211_tx_power_setting type, int mbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, + const u8 *addr); + + void (*rfkill_poll)(struct wiphy *wiphy); + +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); + int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len); +#endif + + int (*set_bitrate_mask)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *peer, + const struct cfg80211_bitrate_mask *mask); + + int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, + int idx, struct survey_info *info); + + int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_pmksa *pmksa); + int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_pmksa *pmksa); + int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); + + int (*remain_on_channel)(struct wiphy *wiphy, + struct net_device *dev, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + unsigned int duration, + u64 *cookie); + int (*cancel_remain_on_channel)(struct wiphy *wiphy, + struct net_device *dev, + u64 cookie); + + int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_channel *chan, bool offchan, + enum nl80211_channel_type channel_type, + bool channel_type_valid, unsigned int wait, + const u8 *buf, size_t len, bool no_cck, + bool dont_wait_for_ack, u64 *cookie); + int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, + struct net_device *dev, + u64 cookie); + + int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, + bool enabled, int timeout); + + int (*set_cqm_rssi_config)(struct wiphy *wiphy, + struct net_device *dev, + s32 rssi_thold, u32 rssi_hyst); + + void (*mgmt_frame_register)(struct wiphy *wiphy, + struct net_device *dev, + u16 frame_type, bool reg); + + int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); + int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); + + int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx); + void (*get_ringparam)(struct wiphy *wiphy, + u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); + + int (*sched_scan_start)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_sched_scan_request *request); + int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_gtk_rekey_data *data); + + int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, u8 action_code, u8 dialog_token, + u16 status_code, const u8 *buf, size_t len); + int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, enum nl80211_tdls_operation oper); + + int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, + const u8 *peer, u64 *cookie); + + struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy); + + int (*notify_btcoex_inq_status)(struct wiphy *wiphy, bool status); + int (*notify_btcoex_sco_status)(struct wiphy *wiphy, bool status, + bool esco, u32 tx_interval, + u32 tx_pkt_len); + int (*notify_btcoex_a2dp_status)(struct wiphy *wiphy, bool status); + int (*notify_btcoex_acl_info)(struct wiphy *wiphy, + enum nl80211_btcoex_acl_role role, + u32 remote_lmp_ver); + int (*notify_btcoex_antenna_config)(struct wiphy *wiphy, + enum nl80211_btcoex_antenna_config); + int (*notify_btcoex_bt_vendor)(struct wiphy *wiphy, + enum nl80211_btcoex_vendor_list); + int (*notify_btcoex)(struct wiphy *wiphy, + u8 *buf, int len); + int (*priv_cmd)(struct wiphy *wiphy, struct net_device *dev, + char *priv_cmd); + int (*notify_p2p_flush)(struct wiphy *wiphy); +}; + +/* + * wireless hardware and networking interfaces structures + * and registration/helper functions + */ + +/** + * enum wiphy_flags - wiphy capability flags + * + * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). + * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will + * ignore regulatory domain settings until it gets its own regulatory + * domain via its regulatory_hint() unless the regulatory hint is + * from a country IE. After its gets its own regulatory domain it will + * only allow further regulatory domain settings to further enhance + * compliance. For example if channel 13 and 14 are disabled by this + * regulatory domain no user regulatory domain can enable these channels + * at a later time. This can be used for devices which do not have + * calibration information guaranteed for frequencies or settings + * outside of its regulatory domain. + * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure + * that passive scan flags and beaconing flags may not be lifted by + * cfg80211 due to regulatory beacon hints. For more information on beacon + * hints read the documenation for regulatory_hint_found_beacon() + * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this + * wiphy at all + * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface + * combinations for this device. This flag is used for backward + * compatibility only until all drivers advertise combinations and + * they will always be enforced. + * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled + * by default -- this flag will be set depending on the kernel's default + * on wiphy_new(), but can be changed by the driver if it has a good + * reason to override the default + * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station + * on a VLAN interface) + * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the + * control port protocol ethertype. The device also honours the + * control_port_no_encrypt flag. + * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. + * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing + * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. + * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. + * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the + * firmware. + * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. + * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. + * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) + * link setup/discovery operations internally. Setup, discovery and + * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT + * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be + * used for asking the driver/firmware to perform a TDLS operation. + * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME + * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes + * when there are virtual interfaces in AP mode by calling + * cfg80211_report_obss_beacon(). + * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device + * responds to probe-requests in hardware. + */ +enum wiphy_flags { + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), + WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), + WIPHY_FLAG_IBSS_RSN = BIT(8), + WIPHY_FLAG_MESH_AUTH = BIT(10), + WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), + WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), + WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), + WIPHY_FLAG_AP_UAPSD = BIT(14), + WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), + WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), + WIPHY_FLAG_HAVE_AP_SME = BIT(17), + WIPHY_FLAG_REPORTS_OBSS = BIT(18), + WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), +}; + +/** + * struct ieee80211_iface_limit - limit on certain interface types + * @max: maximum number of interfaces of these types + * @types: interface types (bits) + */ +struct ieee80211_iface_limit { + u16 max; + u16 types; +}; + +/** + * struct ieee80211_iface_combination - possible interface combination + * @limits: limits for the given interface types + * @n_limits: number of limitations + * @num_different_channels: can use up to this many different channels + * @max_interfaces: maximum number of interfaces in total allowed in this + * group + * @beacon_int_infra_match: In this combination, the beacon intervals + * between infrastructure and AP types must match. This is required + * only in special cases. + * + * These examples can be expressed as follows: + * + * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: + * + * struct ieee80211_iface_limit limits1[] = { + * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, + * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, }, + * }; + * struct ieee80211_iface_combination combination1 = { + * .limits = limits1, + * .n_limits = ARRAY_SIZE(limits1), + * .max_interfaces = 2, + * .beacon_int_infra_match = true, + * }; + * + * + * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: + * + * struct ieee80211_iface_limit limits2[] = { + * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | + * BIT(NL80211_IFTYPE_P2P_GO), }, + * }; + * struct ieee80211_iface_combination combination2 = { + * .limits = limits2, + * .n_limits = ARRAY_SIZE(limits2), + * .max_interfaces = 8, + * .num_different_channels = 1, + * }; + * + * + * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. + * This allows for an infrastructure connection and three P2P connections. + * + * struct ieee80211_iface_limit limits3[] = { + * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, + * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) | + * BIT(NL80211_IFTYPE_P2P_CLIENT), }, + * }; + * struct ieee80211_iface_combination combination3 = { + * .limits = limits3, + * .n_limits = ARRAY_SIZE(limits3), + * .max_interfaces = 4, + * .num_different_channels = 2, + * }; + */ +struct ieee80211_iface_combination { + const struct ieee80211_iface_limit *limits; + u32 num_different_channels; + u16 max_interfaces; + u8 n_limits; + bool beacon_int_infra_match; +}; + +struct mac_address { + u8 addr[ETH_ALEN]; +}; + +struct ieee80211_txrx_stypes { + u16 tx, rx; +}; + +/** + * enum wiphy_wowlan_support_flags - WoWLAN support flags + * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any" + * trigger that keeps the device operating as-is and + * wakes up the host on any activity, for example a + * received packet that passed filtering; note that the + * packet should be preserved in that case + * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet + * (see nl80211.h) + * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect + * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep + * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure + * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request + * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure + * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release + */ +enum wiphy_wowlan_support_flags { + WIPHY_WOWLAN_ANY = BIT(0), + WIPHY_WOWLAN_MAGIC_PKT = BIT(1), + WIPHY_WOWLAN_DISCONNECT = BIT(2), + WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), + WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), + WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), + WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), + WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), +}; + +/** + * struct wiphy_wowlan_support - WoWLAN support data + * @flags: see &enum wiphy_wowlan_support_flags + * @n_patterns: number of supported wakeup patterns + * (see nl80211.h for the pattern definition) + * @pattern_max_len: maximum length of each pattern + * @pattern_min_len: minimum length of each pattern + */ +struct wiphy_wowlan_support { + u32 flags; + int n_patterns; + int pattern_max_len; + int pattern_min_len; +}; + +/** + * struct wiphy - wireless hardware description + * @reg_notifier: the driver's regulatory notification callback, + * note that if your driver uses wiphy_apply_custom_regulatory() + * the reg_notifier's request can be passed as NULL + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. + * @signal_type: signal type reported in &struct cfg80211_bss. + * @cipher_suites: supported cipher suites + * @n_cipher_suites: number of supported cipher suites + * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) + * @retry_long: Retry limit for long frames (dot11LongRetryLimit) + * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); + * -1 = fragmentation disabled, only odd values >= 256 used + * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled + * @_net: the network namespace this wiphy currently lives in + * @perm_addr: permanent MAC address of this device + * @addr_mask: If the device supports multiple MAC addresses by masking, + * set this to a mask with variable bits set to 1, e.g. if the last + * four bits are variable then set it to 00:...:00:0f. The actual + * variable bits shall be determined by the interfaces added, with + * interfaces not matching the mask being rejected to be brought up. + * @n_addresses: number of addresses in @addresses. + * @addresses: If the device has more than one address, set this pointer + * to a list of addresses (6 bytes each). The first one will be used + * by default for perm_addr. In this case, the mask should be set to + * all-zeroes. In this case it is assumed that the device can handle + * the same number of arbitrary MAC addresses. + * @registered: protects ->resume and ->suspend sysfs callbacks against + * unregister hardware + * @debugfsdir: debugfs directory used for this wiphy, will be renamed + * automatically on wiphy renames + * @dev: (virtual) struct device for this wiphy + * @registered: helps synchronize suspend/resume with wiphy unregister + * @wext: wireless extension handlers + * @priv: driver private data (sized according to wiphy_new() parameter) + * @interface_modes: bitmask of interfaces types valid for this wiphy, + * must be set by driver + * @iface_combinations: Valid interface combinations array, should not + * list single interface types. + * @n_iface_combinations: number of entries in @iface_combinations array. + * @software_iftypes: bitmask of software interface types, these are not + * subject to any restrictions since they are purely managed in SW. + * @flags: wiphy flags, see &enum wiphy_flags + * @features: features advertised to nl80211, see &enum nl80211_feature_flags. + * @bss_priv_size: each BSS struct has private data allocated with it, + * this variable determines its size + * @max_scan_ssids: maximum number of SSIDs the device can scan for in + * any given scan + * @max_sched_scan_ssids: maximum number of SSIDs the device can scan + * for in any given scheduled scan + * @max_match_sets: maximum number of match sets the device can handle + * when performing a scheduled scan, 0 if filtering is not + * supported. + * @max_scan_ie_len: maximum length of user-controlled IEs device can + * add to probe request frames transmitted during a scan, must not + * include fixed IEs like supported rates + * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled + * scans + * @coverage_class: current coverage class + * @fw_version: firmware version for ethtool reporting + * @hw_version: hardware version for ethtool reporting + * @max_num_pmkids: maximum number of PMKIDs supported by device + * @privid: a pointer that drivers can use to identify if an arbitrary + * wiphy is theirs, e.g. in global notifiers + * @bands: information about bands/channels supported by this device + * + * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or + * transmitted through nl80211, points to an array indexed by interface + * type + * + * @available_antennas_tx: bitmap of antennas which are available to be + * configured as TX antennas. Antenna configuration commands will be + * rejected unless this or @available_antennas_rx is set. + * + * @available_antennas_rx: bitmap of antennas which are available to be + * configured as RX antennas. Antenna configuration commands will be + * rejected unless this or @available_antennas_tx is set. + * + * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation + * may request, if implemented. + * + * @wowlan: WoWLAN support information + * + * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. + */ +struct wiphy { + /* assign these fields before you register the wiphy */ + +#define WIPHY_COMPAT_PAD_SIZE 2048 + u8 padding[WIPHY_COMPAT_PAD_SIZE]; + + /* permanent MAC address(es) */ + u8 perm_addr[ETH_ALEN]; + u8 addr_mask[ETH_ALEN]; + + struct mac_address *addresses; + + const struct ieee80211_txrx_stypes *mgmt_stypes; + + const struct ieee80211_iface_combination *iface_combinations; + int n_iface_combinations; + u16 software_iftypes; + + u16 n_addresses; + + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ + u16 interface_modes; + + u32 flags, features; + + u32 ap_sme_capa; + + enum cfg80211_signal_type signal_type; + + int bss_priv_size; + u8 max_scan_ssids; + u8 max_sched_scan_ssids; + u8 max_match_sets; + u16 max_scan_ie_len; + u16 max_sched_scan_ie_len; + + int n_cipher_suites; + const u32 *cipher_suites; + + u8 retry_short; + u8 retry_long; + u32 frag_threshold; + u32 rts_threshold; + u8 coverage_class; + + char fw_version[ETHTOOL_BUSINFO_LEN]; + u32 hw_version; + + struct wiphy_wowlan_support wowlan; + + u16 max_remain_on_channel_duration; + + u8 max_num_pmkids; + + u32 available_antennas_tx; + u32 available_antennas_rx; + + /* + * Bitmap of supported protocols for probe response offloading + * see &enum nl80211_probe_resp_offload_support_attr. Only valid + * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. + */ + u32 probe_resp_offload; + + /* If multiple wiphys are registered and you're handed e.g. + * a regular netdev with assigned ieee80211_ptr, you won't + * know whether it points to a wiphy your driver has registered + * or not. Assign this to something global to your driver to + * help determine whether you own this wiphy or not. */ + const void *privid; + + struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); + + /* fields below are read-only, assigned by cfg80211 */ + + const struct ieee80211_regdomain *regd; + + /* the item in /sys/class/ieee80211/ points to this, + * you need use set_wiphy_dev() (see below) */ + struct device dev; + + /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ + bool registered; + + /* dir in debugfs: ieee80211/ */ + struct dentry *debugfsdir; + +#ifdef CONFIG_NET_NS + /* the network namespace this phy lives in currently */ + struct net *_net; +#endif + +#ifdef CONFIG_CFG80211_WEXT + const struct iw_handler_def *wext; +#endif + + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); +}; + +static inline struct net *wiphy_net(struct wiphy *wiphy) +{ + return read_pnet(&wiphy->_net); +} + +static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) +{ + write_pnet(&wiphy->_net, net); +} + +/** + * wiphy_priv - return priv from wiphy + * + * @wiphy: the wiphy whose priv pointer to return + */ +static inline void *wiphy_priv(struct wiphy *wiphy) +{ + BUG_ON(!wiphy); + return &wiphy->priv; +} + +/** + * priv_to_wiphy - return the wiphy containing the priv + * + * @priv: a pointer previously returned by wiphy_priv + */ +static inline struct wiphy *priv_to_wiphy(void *priv) +{ + BUG_ON(!priv); + return container_of(priv, struct wiphy, priv); +} + +/** + * set_wiphy_dev - set device pointer for wiphy + * + * @wiphy: The wiphy whose device to bind + * @dev: The device to parent it to + */ +static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) +{ + wiphy->dev.parent = dev; +} + +/** + * wiphy_dev - get wiphy dev pointer + * + * @wiphy: The wiphy whose device struct to look up + */ +static inline struct device *wiphy_dev(struct wiphy *wiphy) +{ + return wiphy->dev.parent; +} + +/** + * wiphy_name - get wiphy name + * + * @wiphy: The wiphy whose name to return + */ +static inline const char *wiphy_name(const struct wiphy *wiphy) +{ + return dev_name(&wiphy->dev); +} + +/** + * wiphy_new - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * The returned pointer must be assigned to each netdev's + * ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); + +/** + * wiphy_register - register a wiphy with cfg80211 + * + * @wiphy: The wiphy to register. + * + * Returns a non-negative wiphy index or a negative error code. + */ +extern int wiphy_register(struct wiphy *wiphy); + +/** + * wiphy_unregister - deregister a wiphy from cfg80211 + * + * @wiphy: The wiphy to unregister. + * + * After this call, no more requests can be made with this priv + * pointer, but the call may sleep to wait for an outstanding + * request that is being handled. + */ +extern void wiphy_unregister(struct wiphy *wiphy); + +/** + * wiphy_free - free wiphy + * + * @wiphy: The wiphy to free + */ +extern void wiphy_free(struct wiphy *wiphy); + +/* internal structs */ +struct cfg80211_conn; +struct cfg80211_internal_bss; +struct cfg80211_cached_keys; + +#define MAX_AUTH_BSSES 4 + +/** + * struct wireless_dev - wireless per-netdev state + * + * This structure must be allocated by the driver/stack + * that uses the ieee80211_ptr field in struct net_device + * (this is intentional so it can be allocated along with + * the netdev.) + * + * @wiphy: pointer to hardware description + * @iftype: interface type + * @list: (private) Used to collect the interfaces + * @netdev: (private) Used to reference back to the netdev + * @current_bss: (private) Used by the internal configuration code + * @channel: (private) Used by the internal configuration code to track + * user-set AP, monitor and WDS channels for wireless extensions + * @bssid: (private) Used by the internal configuration code + * @ssid: (private) Used by the internal configuration code + * @ssid_len: (private) Used by the internal configuration code + * @mesh_id_len: (private) Used by the internal configuration code + * @mesh_id_up_len: (private) Used by the internal configuration code + * @wext: (private) Used by the internal wireless extensions compat code + * @use_4addr: indicates 4addr mode is used on this interface, must be + * set by driver (if supported) on add_interface BEFORE registering the + * netdev and may otherwise be used by driver read-only, will be update + * by cfg80211 on change_interface + * @mgmt_registrations: list of registrations for management frames + * @mgmt_registrations_lock: lock for the list + * @mtx: mutex used to lock data in this struct + * @cleanup_work: work struct used for cleanup that can't be done directly + * @beacon_interval: beacon interval used on this device for transmitting + * beacons, 0 when not valid + */ +struct wireless_dev { + struct wiphy *wiphy; + enum nl80211_iftype iftype; + + /* the remainder of this struct should be private to cfg80211 */ + struct list_head list; + struct net_device *netdev; + + struct list_head mgmt_registrations; + spinlock_t mgmt_registrations_lock; + + struct mutex mtx; + + struct work_struct cleanup_work; + + bool use_4addr; + + /* currently used for IBSS and SME - might be rearranged later */ + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len, mesh_id_len, mesh_id_up_len; + enum { + CFG80211_SME_IDLE, + CFG80211_SME_CONNECTING, + CFG80211_SME_CONNECTED, + } sme_state; + struct cfg80211_conn *conn; + struct cfg80211_cached_keys *connect_keys; + + struct list_head event_list; + spinlock_t event_lock; + + struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *current_bss; /* associated / joined */ + struct ieee80211_channel *channel; + + bool ps; + int ps_timeout; + + int beacon_interval; + + u32 ap_unexpected_nlpid; + +#ifdef CONFIG_CFG80211_WEXT + /* wext data */ + struct { + struct cfg80211_ibss_params ibss; + struct cfg80211_connect_params connect; + struct cfg80211_cached_keys *keys; + u8 *ie; + size_t ie_len; + u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + s8 default_key, default_mgmt_key; + bool prev_bssid_valid; + } wext; +#endif +}; + +/** + * wdev_priv - return wiphy priv from wireless_dev + * + * @wdev: The wireless device whose wiphy's priv pointer to return + */ +static inline void *wdev_priv(struct wireless_dev *wdev) +{ + BUG_ON(!wdev); + return wiphy_priv(wdev->wiphy); +} + +/** + * DOC: Utility functions + * + * cfg80211 offers a number of utility functions that can be useful. + */ + +/** + * ieee80211_channel_to_frequency - convert channel number to frequency + * @chan: channel number + * @band: band, necessary due to channel number overlap + */ +extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); + +/** + * ieee80211_frequency_to_channel - convert frequency to channel number + * @freq: center frequency + */ +extern int ieee80211_frequency_to_channel(int freq); + +/* + * Name indirection necessary because the ieee80211 code also has + * a function named "ieee80211_get_channel", so if you include + * cfg80211's header file you get cfg80211's version, if you try + * to include both header files you'll (rightfully!) get a symbol + * clash. + */ +extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, + int freq); +/** + * ieee80211_get_channel - get channel struct from wiphy for specified frequency + * @wiphy: the struct wiphy to get the channel for + * @freq: the center frequency of the channel + */ +static inline struct ieee80211_channel * +ieee80211_get_channel(struct wiphy *wiphy, int freq) +{ + return __ieee80211_get_channel(wiphy, freq); +} + +/** + * ieee80211_get_response_rate - get basic rate for a given rate + * + * @sband: the band to look for rates in + * @basic_rates: bitmap of basic rates + * @bitrate: the bitrate for which to find the basic rate + * + * This function returns the basic rate corresponding to a given + * bitrate, that is the next lower bitrate contained in the basic + * rate map, which is, for this function, given as a bitmap of + * indices of rates in the band's bitrate table. + */ +struct ieee80211_rate * +ieee80211_get_response_rate(struct ieee80211_supported_band *sband, + u32 basic_rates, int bitrate); + +/* + * Radiotap parsing functions -- for controlled injection support + * + * Implemented in net/wireless/radiotap.c + * Documentation in Documentation/networking/radiotap-headers.txt + */ + +struct radiotap_align_size { + uint8_t align:4, size:4; +}; + +struct ieee80211_radiotap_namespace { + const struct radiotap_align_size *align_size; + int n_bits; + uint32_t oui; + uint8_t subns; +}; + +struct ieee80211_radiotap_vendor_namespaces { + const struct ieee80211_radiotap_namespace *ns; + int n_ns; +}; + +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @this_arg_index: index of current arg, valid after each successful call + * to ieee80211_radiotap_iterator_next() + * @this_arg: pointer to current radiotap arg; it is valid after each + * call to ieee80211_radiotap_iterator_next() but also after + * ieee80211_radiotap_iterator_init() where it will point to + * the beginning of the actual data portion + * @this_arg_size: length of the current arg, for convenience + * @current_namespace: pointer to the current namespace definition + * (or internally %NULL if the current namespace is unknown) + * @is_radiotap_ns: indicates whether the current namespace is the default + * radiotap namespace or not + * + * @_rtheader: pointer to the radiotap header we are walking through + * @_max_length: length of radiotap header in cpu byte ordering + * @_arg_index: next argument index + * @_arg: next argument pointer + * @_next_bitmap: internal pointer to next present u32 + * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * @_vns: vendor namespace definitions + * @_next_ns_data: beginning of the next namespace's data + * @_reset_on_ext: internal; reset the arg index to 0 when going to the + * next bitmap word + * + * Describes the radiotap parser state. Fields prefixed with an underscore + * must not be used by users of the parser, only by the parser internally. + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *_rtheader; + const struct ieee80211_radiotap_vendor_namespaces *_vns; + const struct ieee80211_radiotap_namespace *current_namespace; + + unsigned char *_arg, *_next_ns_data; + __le32 *_next_bitmap; + + unsigned char *this_arg; + int this_arg_index; + int this_arg_size; + + int is_radiotap_ns; + + int _max_length; + int _arg_index; + uint32_t _bitmap_shifter; + int _reset_on_ext; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + + +extern const unsigned char rfc1042_header[6]; +extern const unsigned char bridge_tunnel_header[6]; + +/* Parsed Information Elements */ +struct ieee802_11_elems { + u8 *ie_start; + size_t total_len; + + /* pointers to IEs */ + u8 *ssid; + u8 *supp_rates; + u8 *fh_params; + u8 *ds_params; + u8 *cf_params; + struct ieee80211_tim_ie *tim; + u8 *ibss_params; + u8 *challenge; + u8 *wpa; + u8 *rsn; + u8 *erp_info; + u8 *ext_supp_rates; + u8 *wmm_info; + u8 *wmm_param; + struct ieee80211_ht_cap *ht_cap_elem; + struct ieee80211_ht_info *ht_info_elem; + struct ieee80211_meshconf_ie *mesh_config; + u8 *mesh_id; + u8 *peering; + u8 *preq; + u8 *prep; + u8 *perr; + struct ieee80211_rann_ie *rann; + u8 *ch_switch_elem; + u8 *country_elem; + u8 *pwr_constr_elem; + u8 *quiet_elem; /* first quite element */ + u8 *timeout_int; + + /* length of them, respectively */ + u8 ssid_len; + u8 supp_rates_len; + u8 fh_params_len; + u8 ds_params_len; + u8 cf_params_len; + u8 tim_len; + u8 ibss_params_len; + u8 challenge_len; + u8 wpa_len; + u8 rsn_len; + u8 erp_info_len; + u8 ext_supp_rates_len; + u8 wmm_info_len; + u8 wmm_param_len; + u8 mesh_id_len; + u8 peering_len; + u8 preq_len; + u8 prep_len; + u8 perr_len; + u8 ch_switch_elem_len; + u8 country_elem_len; + u8 pwr_constr_elem_len; + u8 quiet_elem_len; + u8 num_of_quiet_elem; /* can be more the one */ + u8 timeout_int_len; +}; + +/** + * ieee80211_get_hdrlen_from_skb - get header length from data + * + * Given an skb with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + * + * @skb: the frame + */ +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); + +/** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); + +/** + * DOC: Data path helpers + * + * In addition to generic utilities, cfg80211 also offers + * functions that help implement the data path for devices + * that do not do the 802.11/802.3 conversion on the device. + */ + +/** + * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 + * @skb: the 802.11 data frame + * @addr: the device MAC address + * @iftype: the virtual interface type + */ +int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, + enum nl80211_iftype iftype); + +/** + * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 + * @skb: the 802.3 frame + * @addr: the device MAC address + * @iftype: the virtual interface type + * @bssid: the network bssid (used only for iftype STATION and ADHOC) + * @qos: build 802.11 QoS data frame + */ +int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, + enum nl80211_iftype iftype, u8 *bssid, bool qos); + +/** + * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame + * + * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of + * 802.3 frames. The @list will be empty if the decode fails. The + * @skb is consumed after the function returns. + * + * @skb: The input IEEE 802.11n A-MSDU frame. + * @list: The output list of 802.3 frames. It must be allocated and + * initialized by by the caller. + * @addr: The device MAC address. + * @iftype: The device interface type. + * @extra_headroom: The hardware extra headroom for SKBs in the @list. + * @has_80211_header: Set it true if SKB is with IEEE 802.11 header. + */ +void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, + const u8 *addr, enum nl80211_iftype iftype, + const unsigned int extra_headroom, + bool has_80211_header); + +/** + * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame + * @skb: the data frame + */ +unsigned int cfg80211_classify8021d(struct sk_buff *skb); + +/** + * cfg80211_find_ie - find information element in data + * + * @eid: element ID + * @ies: data consisting of IEs + * @len: length of data + * + * This function will return %NULL if the element ID could + * not be found or if the element is invalid (claims to be + * longer than the given data), or a pointer to the first byte + * of the requested element, that is the byte containing the + * element ID. There are no checks on the element length + * other than having to fit into the given data. + */ +const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); + +/** + * cfg80211_find_vendor_ie - find vendor specific information element in data + * + * @oui: vendor OUI + * @oui_type: vendor-specific OUI type + * @ies: data consisting of IEs + * @len: length of data + * + * This function will return %NULL if the vendor specific element ID + * could not be found or if the element is invalid (claims to be + * longer than the given data), or a pointer to the first byte + * of the requested element, that is the byte containing the + * element ID. There are no checks on the element length + * other than having to fit into the given data. + */ +const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, + const u8 *ies, int len); + +/** + * DOC: Regulatory enforcement infrastructure + * + * TODO + */ + +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * The wiphy must have been registered to cfg80211 prior to this call. + * For cfg80211 drivers this means you must first use wiphy_register(), + * for mac80211 drivers you must first use ieee80211_register_hw(). + * + * Drivers should check the return value, its possible you can get + * an -ENOMEM. + */ +extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @desired_bw_khz: the desired max bandwidth you want to use per + * channel. Note that this is still 20 MHz if you want to use HT40 + * as HT40 makes use of two channels for its 40 MHz width bandwidth. + * If set to 0 we'll assume you want the standard 20 MHz. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, + const struct ieee80211_reg_rule **reg_rule); + +/* + * callbacks for asynchronous cfg80211 methods, notification + * functions and BSS handling helpers + */ + +/** + * cfg80211_scan_done - notify that scan finished + * + * @request: the corresponding scan request + * @aborted: set to true if the scan was aborted for any reason, + * userspace will be notified of that + */ +void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); + +/** + * cfg80211_sched_scan_results - notify that new scan results are available + * + * @wiphy: the wiphy which got scheduled scan results + */ +void cfg80211_sched_scan_results(struct wiphy *wiphy); + +/** + * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped + * + * @wiphy: the wiphy on which the scheduled scan stopped + * + * The driver can call this function to inform cfg80211 that the + * scheduled scan had to be stopped, for whatever reason. The driver + * is then called back via the sched_scan_stop operation when done. + */ +void cfg80211_sched_scan_stopped(struct wiphy *wiphy); + +/** + * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame + * + * @wiphy: the wiphy reporting the BSS + * @channel: The channel the frame was received on + * @mgmt: the management frame (probe response or beacon) + * @len: length of the management frame + * @signal: the signal strength, type depends on the wiphy's signal_type + * @gfp: context flags + * + * This informs cfg80211 that BSS information was found and + * the BSS should be updated/added. + * + * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + */ +struct cfg80211_bss * __must_check +cfg80211_inform_bss_frame(struct wiphy *wiphy, + struct ieee80211_channel *channel, + struct ieee80211_mgmt *mgmt, size_t len, + s32 signal, gfp_t gfp); + +/** + * cfg80211_inform_bss - inform cfg80211 of a new BSS + * + * @wiphy: the wiphy reporting the BSS + * @channel: The channel the frame was received on + * @bssid: the BSSID of the BSS + * @timestamp: the TSF timestamp sent by the peer + * @capability: the capability field sent by the peer + * @beacon_interval: the beacon interval announced by the peer + * @ie: additional IEs sent by the peer + * @ielen: length of the additional IEs + * @signal: the signal strength, type depends on the wiphy's signal_type + * @gfp: context flags + * + * This informs cfg80211 that BSS information was found and + * the BSS should be updated/added. + * + * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + */ +struct cfg80211_bss * __must_check +cfg80211_inform_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + u64 timestamp, u16 capability, u16 beacon_interval, + const u8 *ie, size_t ielen, + s32 signal, gfp_t gfp); + +struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + const u8 *ssid, size_t ssid_len, + u16 capa_mask, u16 capa_val); +static inline struct cfg80211_bss * +cfg80211_get_ibss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *ssid, size_t ssid_len) +{ + return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, + WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); +} + +struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *meshid, size_t meshidlen, + const u8 *meshcfg); +void cfg80211_put_bss(struct cfg80211_bss *bss); + +/** + * cfg80211_unlink_bss - unlink BSS from internal data structures + * @wiphy: the wiphy + * @bss: the bss to remove + * + * This function removes the given BSS from the internal data structures + * thereby making it no longer show up in scan results etc. Use this + * function when you detect a BSS is gone. Normally BSSes will also time + * out, so it is not necessary to use this function at all. + */ +void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); + +void cfg80211_unlink_allbss(struct wiphy *wiphy); + + +/** + * cfg80211_send_rx_auth - notification of processed authentication + * @dev: network device + * @buf: authentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever an authentication has been processed in + * station mode. The driver is required to call either this function or + * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() + * call. This function may sleep. + */ +void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_auth_timeout - notification of timed out authentication + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * This function may sleep. + */ +void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); + +/** + * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * When a pending authentication had no action yet, the driver may decide + * to not send a deauth frame, but in that case must calls this function + * to tell cfg80211 about this decision. It is only valid to call this + * function within the deauth() callback. + */ +void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_rx_assoc - notification of processed association + * @dev: network device + * @buf: (re)association response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a (re)association response has been + * processed in station mode. The driver is required to call either this + * function or cfg80211_send_assoc_timeout() to indicate the result of + * cfg80211_ops::assoc() call. This function may sleep. + */ +void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_assoc_timeout - notification of timed out association + * @dev: network device + * @addr: The MAC address of the device with which the association timed out + * + * This function may sleep. + */ +void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever deauthentication has been processed in + * station mode. This includes both received deauthentication frames and + * locally generated ones. This function may sleep. + */ +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_deauth(), but doesn't take the wdev lock. + */ +void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever disassociation has been processed in + * station mode. This includes both received disassociation frames and locally + * generated ones. This function may sleep. + */ +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_disassoc(), but doesn't take the wdev lock. + */ +void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_send_unprot_deauth - notification of unprotected deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a received Deauthentication frame has been + * dropped in station mode because of MFP being used but the Deauthentication + * frame was not protected. This function may sleep. + */ +void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_send_unprot_disassoc - notification of unprotected disassociation + * @dev: network device + * @buf: disassociation frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a received Disassociation frame has been + * dropped in station mode because of MFP being used but the Disassociation + * frame was not protected. This function may sleep. + */ +void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) + * @dev: network device + * @addr: The source MAC address of the frame + * @key_type: The key type that the received frame used + * @key_id: Key identifier (0..3). Can be -1 if missing. + * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) + * @gfp: allocation flags + * + * This function is called whenever the local MAC detects a MIC failure in a + * received frame. This matches with MLME-MICHAELMICFAILURE.indication() + * primitive. + */ +void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, + enum nl80211_key_type key_type, int key_id, + const u8 *tsc, gfp_t gfp); + +/** + * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS + * + * @dev: network device + * @bssid: the BSSID of the IBSS joined + * @gfp: allocation flags + * + * This function notifies cfg80211 that the device joined an IBSS or + * switched to a different BSSID. Before this function can be called, + * either a beacon has to have been received from the IBSS, or one of + * the cfg80211_inform_bss{,_frame} functions must have been called + * with the locally generated beacon -- this guarantees that there is + * always a scan result for this IBSS. cfg80211 will handle the rest. + */ +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); + +/** + * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate + * + * @dev: network device + * @macaddr: the MAC address of the new candidate + * @ie: information elements advertised by the peer candidate + * @ie_len: lenght of the information elements buffer + * @gfp: allocation flags + * + * This function notifies cfg80211 that the mesh peer candidate has been + * detected, most likely via a beacon or, less likely, via a probe response. + * cfg80211 then sends a notification to userspace. + */ +void cfg80211_notify_new_peer_candidate(struct net_device *dev, + const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp); + +/** + * DOC: RFkill integration + * + * RFkill integration in cfg80211 is almost invisible to drivers, + * as cfg80211 automatically registers an rfkill instance for each + * wireless device it knows about. Soft kill is also translated + * into disconnecting and turning all interfaces off, drivers are + * expected to turn off the device when all interfaces are down. + * + * However, devices may have a hard RFkill line, in which case they + * also need to interact with the rfkill subsystem, via cfg80211. + * They can do this with a few helper functions documented here. + */ + +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + +#ifdef CONFIG_NL80211_TESTMODE +/** + * DOC: Test mode + * + * Test mode is a set of utility functions to allow drivers to + * interact with driver-specific tools to aid, for instance, + * factory programming. + * + * This chapter describes how drivers interact with it, for more + * information see the nl80211 book's chapter on it. + */ + +/** + * cfg80211_testmode_alloc_reply_skb - allocate testmode reply + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * + * This function allocates and pre-fills an skb for a reply to + * the testmode command. Since it is intended for a reply, calling + * it outside of the @testmode_cmd operation is invalid. + * + * The returned skb (or %NULL if any errors happen) is pre-filled + * with the wiphy index and set up in a way that any data that is + * put into the skb (with skb_put(), nla_put() or similar) will end + * up being within the %NL80211_ATTR_TESTDATA attribute, so all that + * needs to be done with the skb is adding data for the corresponding + * userspace tool which can then read that data out of the testdata + * attribute. You must not modify the skb in any other way. + * + * When done, call cfg80211_testmode_reply() with the skb and return + * its error code as the result of the @testmode_cmd operation. + */ +struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, + int approxlen); + +/** + * cfg80211_testmode_reply - send the reply skb + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_reply_skb() + * + * Returns an error code or 0 on success, since calling this + * function will usually be the last thing before returning + * from the @testmode_cmd you should return the error code. + * Note that this function consumes the skb regardless of the + * return value. + */ +int cfg80211_testmode_reply(struct sk_buff *skb); + +/** + * cfg80211_testmode_alloc_event_skb - allocate testmode event + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * @gfp: allocation flags + * + * This function allocates and pre-fills an skb for an event on the + * testmode multicast group. + * + * The returned skb (or %NULL if any errors happen) is set up in the + * same way as with cfg80211_testmode_alloc_reply_skb() but prepared + * for an event. As there, you should simply add data to it that will + * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must + * not modify the skb in any other way. + * + * When done filling the skb, call cfg80211_testmode_event() with the + * skb to send the event. + */ +struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, + int approxlen, gfp_t gfp); + +/** + * cfg80211_testmode_event - send the event + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_event_skb() + * @gfp: allocation flags + * + * This function sends the given @skb, which must have been allocated + * by cfg80211_testmode_alloc_event_skb(), as an event. It always + * consumes it. + */ +void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); + +#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), +#define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd), +#else +#define CFG80211_TESTMODE_CMD(cmd) +#define CFG80211_TESTMODE_DUMP(cmd) +#endif + +/** + * cfg80211_connect_result - notify cfg80211 of connection result + * + * @dev: network device + * @bssid: the BSSID of the AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @status: status code, 0 for successful connection, use + * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you + * the real status code for failures. + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever connect() has + * succeeded. + */ +void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, + u16 status, gfp_t gfp); + +/** + * cfg80211_roamed - notify cfg80211 of roaming + * + * @dev: network device + * @channel: the channel of the new AP + * @bssid: the BSSID of the new AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever it roamed + * from one AP to another while connected. + */ +void cfg80211_roamed(struct net_device *dev, + struct ieee80211_channel *channel, + const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); + +/** + * cfg80211_roamed_bss - notify cfg80211 of roaming + * + * @dev: network device + * @bss: entry of bss to which STA got roamed + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @gfp: allocation flags + * + * This is just a wrapper to notify cfg80211 of roaming event with driver + * passing bss to avoid a race in timeout of the bss entry. It should be + * called by the underlying driver whenever it roamed from one AP to another + * while connected. Drivers which have roaming implemented in firmware + * may use this function to avoid a race in bss entry timeout where the bss + * entry of the new AP is seen in the driver, but gets timed out by the time + * it is accessed in __cfg80211_roamed() due to delay in scheduling + * rdev->event_work. In case of any failures, the reference is released + * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise, + * it will be released while diconneting from the current bss. + */ +void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); + +/** + * cfg80211_disconnected - notify cfg80211 that connection was dropped + * + * @dev: network device + * @ie: information elements of the deauth/disassoc frame (may be %NULL) + * @ie_len: length of IEs + * @reason: reason code for the disconnection, set it to 0 if unknown + * @gfp: allocation flags + * + * After it calls this function, the driver should enter an idle state + * and not try to connect to any AP any more. + */ +void cfg80211_disconnected(struct net_device *dev, u16 reason, + u8 *ie, size_t ie_len, gfp_t gfp); + +/** + * cfg80211_ready_on_channel - notification of remain_on_channel start + * @dev: network device + * @cookie: the request cookie + * @chan: The current channel (from remain_on_channel request) + * @channel_type: Channel type + * @duration: Duration in milliseconds that the driver intents to remain on the + * channel + * @gfp: allocation flags + */ +void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + unsigned int duration, gfp_t gfp); + +/** + * cfg80211_remain_on_channel_expired - remain_on_channel duration expired + * @dev: network device + * @cookie: the request cookie + * @chan: The current channel (from remain_on_channel request) + * @channel_type: Channel type + * @gfp: allocation flags + */ +void cfg80211_remain_on_channel_expired(struct net_device *dev, + u64 cookie, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + gfp_t gfp); + + +/** + * cfg80211_new_sta - notify userspace about station + * + * @dev: the netdev + * @mac_addr: the station's address + * @sinfo: the station information + * @gfp: allocation flags + */ +void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, + struct station_info *sinfo, gfp_t gfp); + +/** + * cfg80211_del_sta - notify userspace about deletion of a station + * + * @dev: the netdev + * @mac_addr: the station's address + * @gfp: allocation flags + */ +void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); + +/** + * cfg80211_rx_mgmt - notification of received, unprocessed management frame + * @dev: network device + * @freq: Frequency on which the frame was received in MHz + * @buf: Management frame (header + body) + * @len: length of the frame data + * @gfp: context flags + * + * Returns %true if a user space application has registered for this frame. + * For action frames, that makes it responsible for rejecting unrecognized + * action frames; %false otherwise, in which case for action frames the + * driver is responsible for rejecting the frame. + * + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + */ +bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf, + size_t len, gfp_t gfp); + +/** + * cfg80211_mgmt_tx_status - notification of TX status for management frame + * @dev: network device + * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() + * @buf: Management frame (header + body) + * @len: length of the frame data + * @ack: Whether frame was acknowledged + * @gfp: context flags + * + * This function is called whenever a management frame was requested to be + * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the + * transmission attempt. + */ +void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie, + const u8 *buf, size_t len, bool ack, gfp_t gfp); + + +/** + * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event + * @dev: network device + * @rssi_event: the triggered RSSI event + * @gfp: context flags + * + * This function is called when a configured connection quality monitoring + * rssi threshold reached event occurs. + */ +void cfg80211_cqm_rssi_notify(struct net_device *dev, + enum nl80211_cqm_rssi_threshold_event rssi_event, + gfp_t gfp); + +/** + * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer + * @dev: network device + * @peer: peer's MAC address + * @num_packets: how many packets were lost -- should be a fixed threshold + * but probably no less than maybe 50, or maybe a throughput dependent + * threshold (to account for temporary interference) + * @gfp: context flags + */ +void cfg80211_cqm_pktloss_notify(struct net_device *dev, + const u8 *peer, u32 num_packets, gfp_t gfp); + +/** + * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying + * @dev: network device + * @bssid: BSSID of AP (to avoid races) + * @replay_ctr: new replay counter + * @gfp: allocation flags + */ +void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, + const u8 *replay_ctr, gfp_t gfp); + +/** + * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate + * @dev: network device + * @index: candidate index (the smaller the index, the higher the priority) + * @bssid: BSSID of AP + * @preauth: Whether AP advertises support for RSN pre-authentication + * @gfp: allocation flags + */ +void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, + const u8 *bssid, bool preauth, gfp_t gfp); + +/** + * cfg80211_rx_spurious_frame - inform userspace about a spurious frame + * @dev: The device the frame matched to + * @addr: the transmitter address + * @gfp: context flags + * + * This function is used in AP mode (only!) to inform userspace that + * a spurious class 3 frame was received, to be able to deauth the + * sender. + * Returns %true if the frame was passed to userspace (or this failed + * for a reason other than not having a subscription.) + */ +bool cfg80211_rx_spurious_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp); + +/** + * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame + * @dev: The device the frame matched to + * @addr: the transmitter address + * @gfp: context flags + * + * This function is used in AP mode (only!) to inform userspace that + * an associated station sent a 4addr frame but that wasn't expected. + * It is allowed and desirable to send this event only once for each + * station to avoid event flooding. + * Returns %true if the frame was passed to userspace (or this failed + * for a reason other than not having a subscription.) + */ +bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp); + +/** + * cfg80211_probe_status - notify userspace about probe status + * @dev: the device the probe was sent on + * @addr: the address of the peer + * @cookie: the cookie filled in @probe_client previously + * @acked: indicates whether probe was acked or not + * @gfp: allocation flags + */ +void cfg80211_probe_status(struct net_device *dev, const u8 *addr, + u64 cookie, bool acked, gfp_t gfp); + +/** + * cfg80211_report_obss_beacon - report beacon from other APs + * @wiphy: The wiphy that received the beacon + * @frame: the frame + * @len: length of the frame + * @freq: frequency the frame was received on + * @gfp: allocation flags + * + * Use this function to report to userspace when a beacon was + * received. It is not useful to call this when there is no + * netdev that is in AP/GO mode. + */ +void cfg80211_report_obss_beacon(struct wiphy *wiphy, + const u8 *frame, size_t len, + int freq, gfp_t gfp); + +/* Logging, debugging and troubleshooting/diagnostic helpers. */ + +/* wiphy_printk helpers, similar to dev_printk */ + +#define wiphy_printk(level, wiphy, format, args...) \ + dev_printk(level, &(wiphy)->dev, format, ##args) +#define wiphy_emerg(wiphy, format, args...) \ + dev_emerg(&(wiphy)->dev, format, ##args) +#define wiphy_alert(wiphy, format, args...) \ + dev_alert(&(wiphy)->dev, format, ##args) +#define wiphy_crit(wiphy, format, args...) \ + dev_crit(&(wiphy)->dev, format, ##args) +#define wiphy_err(wiphy, format, args...) \ + dev_err(&(wiphy)->dev, format, ##args) +#define wiphy_warn(wiphy, format, args...) \ + dev_warn(&(wiphy)->dev, format, ##args) +#define wiphy_notice(wiphy, format, args...) \ + dev_notice(&(wiphy)->dev, format, ##args) +#define wiphy_info(wiphy, format, args...) \ + dev_info(&(wiphy)->dev, format, ##args) + +#define wiphy_debug(wiphy, format, args...) \ + wiphy_printk(KERN_DEBUG, wiphy, format, ##args) + +#define wiphy_dbg(wiphy, format, args...) \ + dev_dbg(&(wiphy)->dev, format, ##args) + +#if defined(VERBOSE_DEBUG) +#define wiphy_vdbg wiphy_dbg +#else +#define wiphy_vdbg(wiphy, format, args...) \ +({ \ + if (0) \ + wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \ + 0; \ +}) +#endif + +/* + * wiphy_WARN() acts like wiphy_printk(), but with the key difference + * of using a WARN/WARN_ON to get the message out, including the + * file/line information and a backtrace. + */ +#define wiphy_WARN(wiphy, format, args...) \ + WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args); + +#endif /* __NET_CFG80211_H */ diff --git a/include/compat/net/ieee80211_radiotap.h b/include/compat/net/ieee80211_radiotap.h new file mode 100755 index 0000000..7139254 --- /dev/null +++ b/include/compat/net/ieee80211_radiotap.h @@ -0,0 +1,283 @@ +/* + * Copyright (c) 2003, 2004 David Young. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of David Young may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID + * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +/* + * Modifications to fit into the linux IEEE 802.11 stack, + * Mike Kershaw (dragorn@kismetwireless.net) + */ + +#ifndef IEEE80211RADIOTAP_H +#define IEEE80211RADIOTAP_H + +#include +#include +#include + +/* Base version of the radiotap packet header data */ +#define PKTHDR_RADIOTAP_VERSION 0 + +/* A generic radio capture format is desirable. There is one for + * Linux, but it is neither rigidly defined (there were not even + * units given for some fields) nor easily extensible. + * + * I suggest the following extensible radio capture format. It is + * based on a bitmap indicating which fields are present. + * + * I am trying to describe precisely what the application programmer + * should expect in the following, and for that reason I tell the + * units and origin of each measurement (where it applies), or else I + * use sufficiently weaselly language ("is a monotonically nondecreasing + * function of...") that I cannot set false expectations for lawyerly + * readers. + */ + +/* + * The radio capture header precedes the 802.11 header. + * All data in the header is little endian on all platforms. + */ +struct ieee80211_radiotap_header { + u8 it_version; /* Version 0. Only increases + * for drastic changes, + * introduction of compatible + * new fields does not count. + */ + u8 it_pad; + __le16 it_len; /* length of the whole + * header in bytes, including + * it_version, it_pad, + * it_len, and data fields. + */ + __le32 it_present; /* A bitmap telling which + * fields are present. Set bit 31 + * (0x80000000) to extend the + * bitmap by another 32 bits. + * Additional extensions are made + * by setting bit 31. + */ +} __packed; + +/* Name Data type Units + * ---- --------- ----- + * + * IEEE80211_RADIOTAP_TSFT __le64 microseconds + * + * Value in microseconds of the MAC's 64-bit 802.11 Time + * Synchronization Function timer when the first bit of the + * MPDU arrived at the MAC. For received frames, only. + * + * IEEE80211_RADIOTAP_CHANNEL 2 x __le16 MHz, bitmap + * + * Tx/Rx frequency in MHz, followed by flags (see below). + * + * IEEE80211_RADIOTAP_FHSS __le16 see below + * + * For frequency-hopping radios, the hop set (first byte) + * and pattern (second byte). + * + * IEEE80211_RADIOTAP_RATE u8 500kb/s + * + * Tx/Rx data rate + * + * IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from + * one milliwatt (dBm) + * + * RF signal power at the antenna, decibel difference from + * one milliwatt. + * + * IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from + * one milliwatt (dBm) + * + * RF noise power at the antenna, decibel difference from one + * milliwatt. + * + * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB) + * + * RF signal power at the antenna, decibel difference from an + * arbitrary, fixed reference. + * + * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB) + * + * RF noise power at the antenna, decibel difference from an + * arbitrary, fixed reference point. + * + * IEEE80211_RADIOTAP_LOCK_QUALITY __le16 unitless + * + * Quality of Barker code lock. Unitless. Monotonically + * nondecreasing with "better" lock strength. Called "Signal + * Quality" in datasheets. (Is there a standard way to measure + * this?) + * + * IEEE80211_RADIOTAP_TX_ATTENUATION __le16 unitless + * + * Transmit power expressed as unitless distance from max + * power set at factory calibration. 0 is max power. + * Monotonically nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16 decibels (dB) + * + * Transmit power expressed as decibel distance from max power + * set at factory calibration. 0 is max power. Monotonically + * nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from + * one milliwatt (dBm) + * + * Transmit power expressed as dBm (decibels from a 1 milliwatt + * reference). This is the absolute power level measured at + * the antenna port. + * + * IEEE80211_RADIOTAP_FLAGS u8 bitmap + * + * Properties of transmitted and received frames. See flags + * defined below. + * + * IEEE80211_RADIOTAP_ANTENNA u8 antenna index + * + * Unitless indication of the Rx/Tx antenna for this packet. + * The first antenna is antenna 0. + * + * IEEE80211_RADIOTAP_RX_FLAGS __le16 bitmap + * + * Properties of received frames. See flags defined below. + * + * IEEE80211_RADIOTAP_TX_FLAGS __le16 bitmap + * + * Properties of transmitted frames. See flags defined below. + * + * IEEE80211_RADIOTAP_RTS_RETRIES u8 data + * + * Number of rts retries a transmitted frame used. + * + * IEEE80211_RADIOTAP_DATA_RETRIES u8 data + * + * Number of unicast retries a transmitted frame used. + * + * IEEE80211_RADIOTAP_MCS u8, u8, u8 unitless + * + * Contains a bitmap of known fields/flags, the flags, and + * the MCS index. + * + */ +enum ieee80211_radiotap_type { + IEEE80211_RADIOTAP_TSFT = 0, + IEEE80211_RADIOTAP_FLAGS = 1, + IEEE80211_RADIOTAP_RATE = 2, + IEEE80211_RADIOTAP_CHANNEL = 3, + IEEE80211_RADIOTAP_FHSS = 4, + IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5, + IEEE80211_RADIOTAP_DBM_ANTNOISE = 6, + IEEE80211_RADIOTAP_LOCK_QUALITY = 7, + IEEE80211_RADIOTAP_TX_ATTENUATION = 8, + IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9, + IEEE80211_RADIOTAP_DBM_TX_POWER = 10, + IEEE80211_RADIOTAP_ANTENNA = 11, + IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12, + IEEE80211_RADIOTAP_DB_ANTNOISE = 13, + IEEE80211_RADIOTAP_RX_FLAGS = 14, + IEEE80211_RADIOTAP_TX_FLAGS = 15, + IEEE80211_RADIOTAP_RTS_RETRIES = 16, + IEEE80211_RADIOTAP_DATA_RETRIES = 17, + + IEEE80211_RADIOTAP_MCS = 19, + + /* valid in every it_present bitmap, even vendor namespaces */ + IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29, + IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30, + IEEE80211_RADIOTAP_EXT = 31 +}; + +/* Channel flags. */ +#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ +#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ +#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ +#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ +#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ +#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ +#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ +#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ + +/* For IEEE80211_RADIOTAP_FLAGS */ +#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received + * during CFP + */ +#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received + * with short + * preamble + */ +#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received + * with WEP encryption + */ +#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received + * with fragmentation + */ +#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */ +#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between + * 802.11 header and payload + * (to 32-bit boundary) + */ +#define IEEE80211_RADIOTAP_F_BADFCS 0x40 /* bad FCS */ + +/* For IEEE80211_RADIOTAP_RX_FLAGS */ +#define IEEE80211_RADIOTAP_F_RX_BADPLCP 0x0002 /* frame has bad PLCP */ + +/* For IEEE80211_RADIOTAP_TX_FLAGS */ +#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive + * retries */ +#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */ +#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */ +#define IEEE80211_RADIOTAP_F_TX_NOACK 0x0008 /* don't expect an ack */ + + +/* For IEEE80211_RADIOTAP_MCS */ +#define IEEE80211_RADIOTAP_MCS_HAVE_BW 0x01 +#define IEEE80211_RADIOTAP_MCS_HAVE_MCS 0x02 +#define IEEE80211_RADIOTAP_MCS_HAVE_GI 0x04 +#define IEEE80211_RADIOTAP_MCS_HAVE_FMT 0x08 +#define IEEE80211_RADIOTAP_MCS_HAVE_FEC 0x10 + +#define IEEE80211_RADIOTAP_MCS_BW_MASK 0x03 +#define IEEE80211_RADIOTAP_MCS_BW_20 0 +#define IEEE80211_RADIOTAP_MCS_BW_40 1 +#define IEEE80211_RADIOTAP_MCS_BW_20L 2 +#define IEEE80211_RADIOTAP_MCS_BW_20U 3 +#define IEEE80211_RADIOTAP_MCS_SGI 0x04 +#define IEEE80211_RADIOTAP_MCS_FMT_GF 0x08 +#define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10 + + +/* helpers */ +static inline int ieee80211_get_radiotap_len(unsigned char *data) +{ + struct ieee80211_radiotap_header *hdr = + (struct ieee80211_radiotap_header *)data; + + return get_unaligned_le16(&hdr->it_len); +} + +#endif /* IEEE80211_RADIOTAP_H */ diff --git a/include/compat/net/lib80211.h b/include/compat/net/lib80211.h new file mode 100755 index 0000000..d178c26 --- /dev/null +++ b/include/compat/net/lib80211.h @@ -0,0 +1,124 @@ +/* + * lib80211.h -- common bits for IEEE802.11 wireless drivers + * + * Copyright (c) 2008, John W. Linville + * + * Some bits copied from old ieee80211 component, w/ original copyright + * notices below: + * + * Original code based on Host AP (software wireless LAN access point) driver + * for Intersil Prism2/2.5/3. + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * + * Adaption to a generic IEEE 802.11 stack by James Ketrenos + * + * + * Copyright (c) 2004, Intel Corporation + * + */ + +#ifndef LIB80211_H +#define LIB80211_H + +#include +#include +#include +#include +#include +#include +#include +/* print_ssid() is intended to be used in debug (and possibly error) + * messages. It should never be used for passing ssid to user space. */ +const char *print_ssid(char *buf, const char *ssid, u8 ssid_len); +#define DECLARE_SSID_BUF(var) char var[IEEE80211_MAX_SSID_LEN * 4 + 1] __maybe_unused + +#define NUM_WEP_KEYS 4 + +enum { + IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0), +}; + +struct module; + +struct lib80211_crypto_ops { + const char *name; + struct list_head list; + + /* init new crypto context (e.g., allocate private data space, + * select IV, etc.); returns NULL on failure or pointer to allocated + * private data on success */ + void *(*init) (int keyidx); + + /* deinitialize crypto context and free allocated private data */ + void (*deinit) (void *priv); + + /* encrypt/decrypt return < 0 on error or >= 0 on success. The return + * value from decrypt_mpdu is passed as the keyidx value for + * decrypt_msdu. skb must have enough head and tail room for the + * encryption; if not, error will be returned; these functions are + * called for all MPDUs (i.e., fragments). + */ + int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); + + /* These functions are called for full MSDUs, i.e. full frames. + * These can be NULL if full MSDU operations are not needed. */ + int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len, + void *priv); + + int (*set_key) (void *key, int len, u8 * seq, void *priv); + int (*get_key) (void *key, int len, u8 * seq, void *priv); + + /* procfs handler for printing out key information and possible + * statistics */ + char *(*print_stats) (char *p, void *priv); + + /* Crypto specific flag get/set for configuration settings */ + unsigned long (*get_flags) (void *priv); + unsigned long (*set_flags) (unsigned long flags, void *priv); + + /* maximum number of bytes added by encryption; encrypt buf is + * allocated with extra_prefix_len bytes, copy of in_buf, and + * extra_postfix_len; encrypt need not use all this space, but + * the result must start at the beginning of the buffer and correct + * length must be returned */ + int extra_mpdu_prefix_len, extra_mpdu_postfix_len; + int extra_msdu_prefix_len, extra_msdu_postfix_len; + + struct module *owner; +}; + +struct lib80211_crypt_data { + struct list_head list; /* delayed deletion list */ + struct lib80211_crypto_ops *ops; + void *priv; + atomic_t refcnt; +}; + +struct lib80211_crypt_info { + char *name; + /* Most clients will already have a lock, + so just point to that. */ + spinlock_t *lock; + + struct lib80211_crypt_data *crypt[NUM_WEP_KEYS]; + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + struct list_head crypt_deinit_list; + struct timer_list crypt_deinit_timer; + int crypt_quiesced; +}; + +int lib80211_crypt_info_init(struct lib80211_crypt_info *info, char *name, + spinlock_t *lock); +void lib80211_crypt_info_free(struct lib80211_crypt_info *info); +int lib80211_register_crypto_ops(struct lib80211_crypto_ops *ops); +int lib80211_unregister_crypto_ops(struct lib80211_crypto_ops *ops); +struct lib80211_crypto_ops *lib80211_get_crypto_ops(const char *name); +void lib80211_crypt_delayed_deinit(struct lib80211_crypt_info *info, + struct lib80211_crypt_data **crypt); + +#endif /* LIB80211_H */ diff --git a/include/compat/net/mac80211.h b/include/compat/net/mac80211.h new file mode 100755 index 0000000..c26795fc --- /dev/null +++ b/include/compat/net/mac80211.h @@ -0,0 +1,3686 @@ +/* + * mac80211 <-> driver interface + * + * Copyright 2002-2005, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc + * Copyright 2007-2010 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MAC80211_H +#define MAC80211_H + +#include +#include +#include +#include +#include +#include +#include + +/** + * DOC: Introduction + * + * mac80211 is the Linux stack for 802.11 hardware that implements + * only partial functionality in hard- or firmware. This document + * defines the interface between mac80211 and low-level hardware + * drivers. + */ + +/** + * DOC: Calling mac80211 from interrupts + * + * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be + * called in hardware interrupt context. The low-level driver must not call any + * other functions in hardware interrupt context. If there is a need for such + * call, the low-level driver should first ACK the interrupt and perform the + * IEEE 802.11 code call after this, e.g. from a scheduled workqueue or even + * tasklet function. + * + * NOTE: If the driver opts to use the _irqsafe() functions, it may not also + * use the non-IRQ-safe functions! + */ + +/** + * DOC: Warning + * + * If you're reading this document and not the header file itself, it will + * be incomplete because not all documentation has been converted yet. + */ + +/** + * DOC: Frame format + * + * As a general rule, when frames are passed between mac80211 and the driver, + * they start with the IEEE 802.11 header and include the same octets that are + * sent over the air except for the FCS which should be calculated by the + * hardware. + * + * There are, however, various exceptions to this rule for advanced features: + * + * The first exception is for hardware encryption and decryption offload + * where the IV/ICV may or may not be generated in hardware. + * + * Secondly, when the hardware handles fragmentation, the frame handed to + * the driver from mac80211 is the MSDU, not the MPDU. + * + * Finally, for received frames, the driver is able to indicate that it has + * filled a radiotap header and put that in front of the frame; if it does + * not do so then mac80211 may add this under certain circumstances. + */ + +/** + * DOC: mac80211 workqueue + * + * mac80211 provides its own workqueue for drivers and internal mac80211 use. + * The workqueue is a single threaded workqueue and can only be accessed by + * helpers for sanity checking. Drivers must ensure all work added onto the + * mac80211 workqueue should be cancelled on the driver stop() callback. + * + * mac80211 will flushed the workqueue upon interface removal and during + * suspend. + * + * All work performed on the mac80211 workqueue must not acquire the RTNL lock. + * + */ + +/** + * enum ieee80211_max_queues - maximum number of queues + * + * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. + */ +enum ieee80211_max_queues { + IEEE80211_MAX_QUEUES = 4, +}; + +/** + * enum ieee80211_ac_numbers - AC numbers as used in mac80211 + * @IEEE80211_AC_VO: voice + * @IEEE80211_AC_VI: video + * @IEEE80211_AC_BE: best effort + * @IEEE80211_AC_BK: background + */ +enum ieee80211_ac_numbers { + IEEE80211_AC_VO = 0, + IEEE80211_AC_VI = 1, + IEEE80211_AC_BE = 2, + IEEE80211_AC_BK = 3, +}; +#define IEEE80211_NUM_ACS 4 + +/** + * struct ieee80211_tx_queue_params - transmit queue configuration + * + * The information provided in this structure is required for QoS + * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. + * + * @aifs: arbitration interframe space [0..255] + * @cw_min: minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @cw_max: maximum contention window [like @cw_min] + * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled + * @uapsd: is U-APSD mode enabled for the queue + */ +struct ieee80211_tx_queue_params { + u16 txop; + u16 cw_min; + u16 cw_max; + u8 aifs; + bool uapsd; +}; + +struct ieee80211_low_level_stats { + unsigned int dot11ACKFailureCount; + unsigned int dot11RTSFailureCount; + unsigned int dot11FCSErrorCount; + unsigned int dot11RTSSuccessCount; +}; + +/** + * enum ieee80211_bss_change - BSS change notification flags + * + * These flags are used with the bss_info_changed() callback + * to indicate which BSS parameter changed. + * + * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated), + * also implies a change in the AID. + * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed + * @BSS_CHANGED_ERP_PREAMBLE: preamble changed + * @BSS_CHANGED_ERP_SLOT: slot timing changed + * @BSS_CHANGED_HT: 802.11n parameters changed + * @BSS_CHANGED_BASIC_RATES: Basic rateset changed + * @BSS_CHANGED_BEACON_INT: Beacon interval changed + * @BSS_CHANGED_BSSID: BSSID changed, for whatever + * reason (IBSS and managed mode) + * @BSS_CHANGED_BEACON: Beacon data changed, retrieve + * new beacon (beaconing modes) + * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be + * enabled/disabled (beaconing modes) + * @BSS_CHANGED_CQM: Connection quality monitor config changed + * @BSS_CHANGED_IBSS: IBSS join status changed + * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed. + * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note + * that it is only ever disabled for station mode. + * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface. + * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) + * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) + */ +enum ieee80211_bss_change { + BSS_CHANGED_ASSOC = 1<<0, + BSS_CHANGED_ERP_CTS_PROT = 1<<1, + BSS_CHANGED_ERP_PREAMBLE = 1<<2, + BSS_CHANGED_ERP_SLOT = 1<<3, + BSS_CHANGED_HT = 1<<4, + BSS_CHANGED_BASIC_RATES = 1<<5, + BSS_CHANGED_BEACON_INT = 1<<6, + BSS_CHANGED_BSSID = 1<<7, + BSS_CHANGED_BEACON = 1<<8, + BSS_CHANGED_BEACON_ENABLED = 1<<9, + BSS_CHANGED_CQM = 1<<10, + BSS_CHANGED_IBSS = 1<<11, + BSS_CHANGED_ARP_FILTER = 1<<12, + BSS_CHANGED_QOS = 1<<13, + BSS_CHANGED_IDLE = 1<<14, + BSS_CHANGED_SSID = 1<<15, + BSS_CHANGED_AP_PROBE_RESP = 1<<16, + + /* when adding here, make sure to change ieee80211_reconfig */ +}; + +/* + * The maximum number of IPv4 addresses listed for ARP filtering. If the number + * of addresses for an interface increase beyond this value, hardware ARP + * filtering will be disabled. + */ +#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4 + +/** + * enum ieee80211_rssi_event - RSSI threshold event + * An indicator for when RSSI goes below/above a certain threshold. + * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver. + * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver. + */ +enum ieee80211_rssi_event { + RSSI_EVENT_HIGH, + RSSI_EVENT_LOW, +}; + +/** + * struct ieee80211_bss_conf - holds the BSS's changing parameters + * + * This structure keeps information about a BSS (and an association + * to that BSS) that can change during the lifetime of the BSS. + * + * @assoc: association status + * @ibss_joined: indicates whether this station is part of an IBSS + * or not + * @aid: association ID number, valid only when @assoc is true + * @use_cts_prot: use CTS protection + * @use_short_preamble: use 802.11b short preamble; + * if the hardware cannot handle this it must set the + * IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag + * @use_short_slot: use short slot time (only relevant for ERP); + * if the hardware cannot handle this it must set the + * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag + * @dtim_period: num of beacons before the next DTIM, for beaconing, + * valid in station mode only while @assoc is true and if also + * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf + * @ps_dtim_period) + * @timestamp: beacon timestamp + * @beacon_int: beacon interval + * @assoc_capability: capabilities taken from assoc resp + * @basic_rates: bitmap of basic rates, each bit stands for an + * index into the rate table configured by the driver in + * the current band. + * @mcast_rate: per-band multicast rate index + 1 (0: disabled) + * @bssid: The BSSID for this BSS + * @enable_beacon: whether beaconing should be enabled or not + * @channel_type: Channel type for this BSS -- the hardware might be + * configured for HT40+ while this BSS only uses no-HT, for + * example. + * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). + * This field is only valid when the channel type is one of the HT types. + * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value + * implies disabled + * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis + * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The + * may filter ARP queries targeted for other addresses than listed here. + * The driver must allow ARP queries targeted for all address listed here + * to pass through. An empty list implies no ARP queries need to pass. + * @arp_addr_cnt: Number of addresses currently on the list. + * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may + * filter ARP queries based on the @arp_addr_list, if disabled, the + * hardware must not perform any ARP filtering. Note, that the filter will + * be enabled also in promiscuous mode. + * @qos: This is a QoS-enabled BSS. + * @idle: This interface is idle. There's also a global idle flag in the + * hardware config which may be more appropriate depending on what + * your driver/device needs to do. + * @ssid: The SSID of the current vif. Only valid in AP-mode. + * @ssid_len: Length of SSID given in @ssid. + * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. + */ +struct ieee80211_bss_conf { + const u8 *bssid; + /* association related data */ + bool assoc, ibss_joined; + u16 aid; + /* erp related data */ + bool use_cts_prot; + bool use_short_preamble; + bool use_short_slot; + bool enable_beacon; + u8 dtim_period; + u16 beacon_int; + u16 assoc_capability; + u64 timestamp; + u32 basic_rates; + int mcast_rate[IEEE80211_NUM_BANDS]; + u16 ht_operation_mode; + s32 cqm_rssi_thold; + u32 cqm_rssi_hyst; + enum nl80211_channel_type channel_type; + __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; + u8 arp_addr_cnt; + bool arp_filter_enabled; + bool qos; + bool idle; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + size_t ssid_len; + bool hidden_ssid; +}; + +/** + * enum mac80211_tx_control_flags - flags to describe transmission information/status + * + * These flags are used with the @flags member of &ieee80211_tx_info. + * + * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons and always be clear for frames without a sequence number field. + * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination + * station + * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. + * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. Note that to + * avoid race conditions, the filter must be set by the hardware or + * firmware upon receiving a frame that indicates that the station + * went to sleep (must be done on device to filter frames already on + * the queue) and may only be unset after mac80211 gives the OK for + * that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above), + * since only then is it guaranteed that no more frames are in the + * hardware queue. + * @IEEE80211_TX_STAT_ACK: Frame was acknowledged + * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. + * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, + * so consider using block ack request (BAR). + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be + * set by rate control algorithms to indicate probe rate, will + * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, + * used to indicate that a pending frame requires TX processing before + * it can be sent out. + * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211, + * used to indicate that a frame was already retried due to PS + * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, + * used to indicate frame should not be encrypted + * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll + * frame (PS-Poll or uAPSD) and should be sent although the station + * is in powersave mode. + * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the + * transmit function after the current frame, this can be used + * by drivers to kick the DMA queue only if unset or when the + * queue gets full. + * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted + * after TX status because the destination was asleep, it must not + * be modified again (no seqno assignment, crypto, etc.) + * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211 + * MLME command (internal to mac80211 to figure out whether to send TX + * status to user space) + * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame + * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this + * frame and selects the maximum number of streams that it can use. + * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on + * the off-channel channel when a remain-on-channel offload is done + * in hardware -- normal packets still flow and are expected to be + * handled properly by the device. + * @IEEE80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP + * testing. It will be sent out with incorrect Michael MIC key to allow + * TKIP countermeasures to be tested. + * @IEEE80211_TX_CTL_NO_CCK_RATE: This frame will be sent at non CCK rate. + * This flag is actually used for management frame especially for P2P + * frames not being sent at CCK rate in 2GHz band. + * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period, + * when its status is reported the service period ends. For frames in + * an SP that mac80211 transmits, it is already set; for driver frames + * the driver may set this flag. It is also used to do the same for + * PS-Poll responses. + * @IEEE80211_TX_CTL_USE_MINRATE: This frame will be sent at lowest rate. + * This flag is used to send nullfunc frame at minimum rate when + * the nullfunc is used for connection monitoring purpose. + * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it + * would be fragmented by size (this is optional, only used for + * monitor injection). + * + * Note: If you have to add new flags to the enumeration, then don't + * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. + */ +enum mac80211_tx_control_flags { + IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), + IEEE80211_TX_CTL_NO_ACK = BIT(2), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5), + IEEE80211_TX_CTL_AMPDU = BIT(6), + IEEE80211_TX_CTL_INJECTED = BIT(7), + IEEE80211_TX_STAT_TX_FILTERED = BIT(8), + IEEE80211_TX_STAT_ACK = BIT(9), + IEEE80211_TX_STAT_AMPDU = BIT(10), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), + IEEE80211_TX_INTFL_RETRIED = BIT(15), + IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), + IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17), + IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), + IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), + /* hole at 20, use later */ + IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21), + IEEE80211_TX_CTL_LDPC = BIT(22), + IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24), + IEEE80211_TX_CTL_TX_OFFCHAN = BIT(25), + IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26), + IEEE80211_TX_CTL_NO_CCK_RATE = BIT(27), + IEEE80211_TX_STATUS_EOSP = BIT(28), + IEEE80211_TX_CTL_USE_MINRATE = BIT(29), + IEEE80211_TX_CTL_DONTFRAG = BIT(30), +}; + +#define IEEE80211_TX_CTL_STBC_SHIFT 23 + +/* + * This definition is used as a mask to clear all temporary flags, which are + * set by the tx handlers for each transmission attempt by the mac80211 stack. + */ +#define IEEE80211_TX_TEMPORARY_FLAGS (IEEE80211_TX_CTL_NO_ACK | \ + IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT | \ + IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \ + IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \ + IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \ + IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \ + IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \ + IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP) + +/** + * enum mac80211_rate_control_flags - per-rate flags set by the + * Rate Control algorithm. + * + * These flags are set by the Rate control algorithm for each rate during tx, + * in the @flags member of struct ieee80211_tx_rate. + * + * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate. + * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required. + * This is set if the current BSS requires ERP protection. + * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble. + * @IEEE80211_TX_RC_MCS: HT rate. + * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in + * Greenfield mode. + * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz. + * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the + * adjacent 20 MHz channels, if the current channel type is + * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS. + * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate. + */ +enum mac80211_rate_control_flags { + IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), + IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), + IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an MCS rate number instead of an index */ + IEEE80211_TX_RC_MCS = BIT(3), + IEEE80211_TX_RC_GREEN_FIELD = BIT(4), + IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), + IEEE80211_TX_RC_DUP_DATA = BIT(6), + IEEE80211_TX_RC_SHORT_GI = BIT(7), +}; + + +/* there are 40 bytes if you don't need the rateset to be kept */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40 + +/* if you do need the rateset, then you have less space */ +#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24 + +/* maximum number of rate stages */ +#define IEEE80211_TX_MAX_RATES 5 + +/** + * struct ieee80211_tx_rate - rate selection/status + * + * @idx: rate index to attempt to send with + * @flags: rate control flags (&enum mac80211_rate_control_flags) + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate along with the flags it used. + * + * &struct ieee80211_tx_info contains an array of these structs + * in the control information, and it will be filled by the rate + * control algorithm according to what should be sent. For example, + * if this array contains, in the format { , } the + * information + * { 3, 2 }, { 2, 2 }, { 1, 4 }, { -1, 0 }, { -1, 0 } + * then this means that the frame should be transmitted + * up to twice at rate 3, up to twice at rate 2, and up to four + * times at rate 1 if it doesn't get acknowledged. Say it gets + * acknowledged by the peer after the fifth attempt, the status + * information should then contain + * { 3, 2 }, { 2, 2 }, { 1, 1 }, { -1, 0 } ... + * since it was transmitted twice at rate 3, twice at rate 2 + * and once at rate 1 after which we received an acknowledgement. + */ +struct ieee80211_tx_rate { + s8 idx; + u8 count; + u8 flags; +} __packed; + +/** + * struct ieee80211_tx_info - skb transmit information + * + * This structure is placed in skb->cb for three uses: + * (1) mac80211 TX control - mac80211 tells the driver what to do + * (2) driver internal use (if applicable) + * (3) TX status information - driver tells mac80211 what happened + * + * The TX control's sta pointer is only valid during the ->tx call, + * it may be NULL. + * + * @flags: transmit info flags, defined above + * @band: the band to transmit on (use for checking for races) + * @antenna_sel_tx: antenna to use, 0 for automatic diversity + * @ack_frame_id: internal frame ID for TX status, used internally + * @control: union for control data + * @status: union for status data + * @driver_data: array of driver_data pointers + * @ampdu_ack_len: number of acked aggregated frames. + * relevant only if IEEE80211_TX_STAT_AMPDU was set. + * @ampdu_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STAT_AMPDU was set. + * @ack_signal: signal strength of the ACK frame + */ +struct ieee80211_tx_info { + /* common information */ + u32 flags; + u8 band; + + u8 antenna_sel_tx; + + u16 ack_frame_id; + + union { + struct { + union { + /* rate control */ + struct { + struct ieee80211_tx_rate rates[ + IEEE80211_TX_MAX_RATES]; + s8 rts_cts_rate_idx; + }; + /* only needed before rate control */ + unsigned long jiffies; + }; + /* NB: vif can be NULL for injected frames */ + struct ieee80211_vif *vif; + struct ieee80211_key_conf *hw_key; + struct ieee80211_sta *sta; + } control; + struct { + struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; + u8 ampdu_ack_len; + int ack_signal; + u8 ampdu_len; + /* 15 bytes free */ + } status; + struct { + struct ieee80211_tx_rate driver_rates[ + IEEE80211_TX_MAX_RATES]; + void *rate_driver_data[ + IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; + }; + void *driver_data[ + IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)]; + }; +}; + +/** + * struct ieee80211_sched_scan_ies - scheduled scan IEs + * + * This structure is used to pass the appropriate IEs to be used in scheduled + * scans for all bands. It contains both the IEs passed from the userspace + * and the ones generated by mac80211. + * + * @ie: array with the IEs for each supported band + * @len: array with the total length of the IEs for each band + */ +struct ieee80211_sched_scan_ies { + u8 *ie[IEEE80211_NUM_BANDS]; + size_t len[IEEE80211_NUM_BANDS]; +}; + +static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) +{ + return (struct ieee80211_tx_info *)skb->cb; +} + +static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb) +{ + return (struct ieee80211_rx_status *)skb->cb; +} + +/** + * ieee80211_tx_info_clear_status - clear TX status + * + * @info: The &struct ieee80211_tx_info to be cleared. + * + * When the driver passes an skb back to mac80211, it must report + * a number of things in TX status. This function clears everything + * in the TX status but the rate control information (it does clear + * the count since you need to fill that in anyway). + * + * NOTE: You can only use this function if you do NOT use + * info->driver_data! Use info->rate_driver_data + * instead if you need only the less space that allows. + */ +static inline void +ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) +{ + int i; + + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, control.rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); + /* clear the rate counts */ + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + info->status.rates[i].count = 0; + + BUILD_BUG_ON( + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23); + memset(&info->status.ampdu_ack_len, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); +} + + +/** + * enum mac80211_rx_flags - receive flags + * + * These flags are used with the @flag member of &struct ieee80211_rx_status. + * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame. + * Use together with %RX_FLAG_MMIC_STRIPPED. + * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware. + * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame, + * verification has been done by the hardware. + * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame. + * If this flag is set, the stack cannot do any replay detection + * hence the driver or hardware will have to do that. + * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on + * the frame. + * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on + * the frame. + * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime + * field) is valid and contains the time the first symbol of the MPDU + * was received. This is useful in monitor mode and for proper IBSS + * merging. + * @RX_FLAG_SHORTPRE: Short preamble was used for this frame + * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index + * @RX_FLAG_40MHZ: HT40 (40 MHz) was used + * @RX_FLAG_SHORT_GI: Short guard interval was used + */ +enum mac80211_rx_flags { + RX_FLAG_MMIC_ERROR = 1<<0, + RX_FLAG_DECRYPTED = 1<<1, + RX_FLAG_MMIC_STRIPPED = 1<<3, + RX_FLAG_IV_STRIPPED = 1<<4, + RX_FLAG_FAILED_FCS_CRC = 1<<5, + RX_FLAG_FAILED_PLCP_CRC = 1<<6, + RX_FLAG_MACTIME_MPDU = 1<<7, + RX_FLAG_SHORTPRE = 1<<8, + RX_FLAG_HT = 1<<9, + RX_FLAG_40MHZ = 1<<10, + RX_FLAG_SHORT_GI = 1<<11, +}; + +/** + * struct ieee80211_rx_status - receive status + * + * The low-level driver should provide this information (the subset + * supported by hardware) to the 802.11 code with each received + * frame, in the skb's control buffer (cb). + * + * @mactime: value in microseconds of the 64-bit Time Synchronization Function + * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. + * @band: the active band when this frame was received + * @freq: frequency the radio was tuned to when receiving this frame, in MHz + * @signal: signal strength when receiving this frame, either in dBm, in dB or + * unspecified depending on the hardware capabilities flags + * @IEEE80211_HW_SIGNAL_* + * @antenna: antenna used + * @rate_idx: index of data rate into band's supported rates or MCS index if + * HT rates are use (RX_FLAG_HT) + * @flag: %RX_FLAG_* + * @rx_flags: internal RX flags for mac80211 + */ +struct ieee80211_rx_status { + u64 mactime; + enum ieee80211_band band; + int freq; + int signal; + int antenna; + int rate_idx; + int flag; + unsigned int rx_flags; +}; + +/** + * enum ieee80211_conf_flags - configuration flags + * + * Flags to define PHY configuration options + * + * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this + * to determine for example whether to calculate timestamps for packets + * or not, do not use instead of filter flags! + * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only). + * This is the power save mode defined by IEEE 802.11-2007 section 11.2, + * meaning that the hardware still wakes up for beacons, is able to + * transmit frames and receive the possible acknowledgment frames. + * Not to be confused with hardware specific wakeup/sleep states, + * driver is responsible for that. See the section "Powersave support" + * for more. + * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set + * the driver should be prepared to handle configuration requests but + * may turn the device off as much as possible. Typically, this flag will + * be set when an interface is set UP but not associated or scanning, but + * it can also be unset in that case when monitor interfaces are active. + * @IEEE80211_CONF_OFFCHANNEL: The device is currently not on its main + * operating channel. + */ +enum ieee80211_conf_flags { + IEEE80211_CONF_MONITOR = (1<<0), + IEEE80211_CONF_PS = (1<<1), + IEEE80211_CONF_IDLE = (1<<2), + IEEE80211_CONF_OFFCHANNEL = (1<<3), +}; + + +/** + * enum ieee80211_conf_changed - denotes which configuration changed + * + * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed + * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed + * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed + * @IEEE80211_CONF_CHANGE_POWER: the TX power changed + * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed + * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed + * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed + */ +enum ieee80211_conf_changed { + IEEE80211_CONF_CHANGE_SMPS = BIT(1), + IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), + IEEE80211_CONF_CHANGE_MONITOR = BIT(3), + IEEE80211_CONF_CHANGE_PS = BIT(4), + IEEE80211_CONF_CHANGE_POWER = BIT(5), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), + IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_IDLE = BIT(8), +}; + +/** + * enum ieee80211_smps_mode - spatial multiplexing power save mode + * + * @IEEE80211_SMPS_AUTOMATIC: automatic + * @IEEE80211_SMPS_OFF: off + * @IEEE80211_SMPS_STATIC: static + * @IEEE80211_SMPS_DYNAMIC: dynamic + * @IEEE80211_SMPS_NUM_MODES: internal, don't use + */ +enum ieee80211_smps_mode { + IEEE80211_SMPS_AUTOMATIC, + IEEE80211_SMPS_OFF, + IEEE80211_SMPS_STATIC, + IEEE80211_SMPS_DYNAMIC, + + /* keep last */ + IEEE80211_SMPS_NUM_MODES, +}; + +/** + * struct ieee80211_conf - configuration of the device + * + * This struct indicates how the driver shall configure the hardware. + * + * @flags: configuration flags defined above + * + * @listen_interval: listen interval in units of beacon interval + * @max_sleep_period: the maximum number of beacon intervals to sleep for + * before checking the beacon for a TIM bit (managed mode only); this + * value will be only achievable between DTIM frames, the hardware + * needs to check for the multicast traffic bit in DTIM beacons. + * This variable is valid only when the CONF_PS flag is set. + * @ps_dtim_period: The DTIM period of the AP we're connected to, for use + * in power saving. Power saving will not be enabled until a beacon + * has been received and the DTIM period is known. + * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the + * powersave documentation below. This variable is valid only when + * the CONF_PS flag is set. + * + * @power_level: requested transmit power (in dBm) + * + * @channel: the channel to tune to + * @channel_type: the channel (HT) type + * + * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame + * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, + * but actually means the number of transmissions not the number of retries + * @short_frame_max_tx_count: Maximum number of transmissions for a "short" + * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the + * number of transmissions not the number of retries + * + * @smps_mode: spatial multiplexing powersave mode; note that + * %IEEE80211_SMPS_STATIC is used when the device is not + * configured for an HT channel + */ +struct ieee80211_conf { + u32 flags; + int power_level, dynamic_ps_timeout; + int max_sleep_period; + + u16 listen_interval; + u8 ps_dtim_period; + + u8 long_frame_max_tx_count, short_frame_max_tx_count; + + struct ieee80211_channel *channel; + enum nl80211_channel_type channel_type; + enum ieee80211_smps_mode smps_mode; +}; + +/** + * struct ieee80211_channel_switch - holds the channel switch data + * + * The information provided in this structure is required for channel switch + * operation. + * + * @timestamp: value in microseconds of the 64-bit Time Synchronization + * Function (TSF) timer when the frame containing the channel switch + * announcement was received. This is simply the rx.mactime parameter + * the driver passed into mac80211. + * @block_tx: Indicates whether transmission must be blocked before the + * scheduled channel switch, as indicated by the AP. + * @channel: the new channel to switch to + * @count: the number of TBTT's until the channel switch event + */ +struct ieee80211_channel_switch { + u64 timestamp; + bool block_tx; + struct ieee80211_channel *channel; + u8 count; +}; + +/** + * struct ieee80211_vif - per-interface data + * + * Data in this structure is continually present for driver + * use during the life of a virtual interface. + * + * @type: type of this virtual interface + * @bss_conf: BSS configuration for this interface, either our own + * or the BSS we're associated to + * @addr: address of this interface + * @p2p: indicates whether this AP or STA interface is a p2p + * interface, i.e. a GO or p2p-sta respectively + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *). + */ +struct ieee80211_vif { + enum nl80211_iftype type; + struct ieee80211_bss_conf bss_conf; + u8 addr[ETH_ALEN]; + bool p2p; + /* must be last */ + u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + +static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) +{ +#ifdef CONFIG_MAC80211_MESH + return vif->type == NL80211_IFTYPE_MESH_POINT; +#endif + return false; +} + +/** + * enum ieee80211_key_flags - key flags + * + * These flags are used for communication about keys between the driver + * and mac80211, with the @flags parameter of &struct ieee80211_key_conf. + * + * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates + * that the STA this key will be used with could be using QoS. + * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the + * driver to indicate that it requires IV generation for this + * particular key. + * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by + * the driver for a TKIP key if it requires Michael MIC + * generation in software. + * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates + * that the key is pairwise rather then a shared key. + * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a + * CCMP key if it requires CCMP encryption of management frames (MFP) to + * be done in software. + * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver + * for a CCMP key if space should be prepared for the IV, but the IV + * itself should not be generated. Do not set together with + * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. + */ +enum ieee80211_key_flags { + IEEE80211_KEY_FLAG_WMM_STA = 1<<0, + IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, + IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, + IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, + IEEE80211_KEY_FLAG_SW_MGMT = 1<<4, + IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5, +}; + +/** + * struct ieee80211_key_conf - key information + * + * This key information is given by mac80211 to the driver by + * the set_key() callback in &struct ieee80211_ops. + * + * @hw_key_idx: To be set by the driver, this is the key index the driver + * wants to be given when a frame is transmitted and needs to be + * encrypted in hardware. + * @cipher: The key's cipher suite selector. + * @flags: key flags, see &enum ieee80211_key_flags. + * @keyidx: the key index (0-3) + * @keylen: key material length + * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte) + * data block: + * - Temporal Encryption Key (128 bits) + * - Temporal Authenticator Tx MIC Key (64 bits) + * - Temporal Authenticator Rx MIC Key (64 bits) + * @icv_len: The ICV length for this key type + * @iv_len: The IV length for this key type + */ +struct ieee80211_key_conf { + u32 cipher; + u8 icv_len; + u8 iv_len; + u8 hw_key_idx; + u8 flags; + s8 keyidx; + u8 keylen; + u8 key[0]; +}; + +/** + * enum set_key_cmd - key command + * + * Used with the set_key() callback in &struct ieee80211_ops, this + * indicates whether a key is being removed or added. + * + * @SET_KEY: a key is set + * @DISABLE_KEY: a key must be disabled + */ +enum set_key_cmd { + SET_KEY, DISABLE_KEY, +}; + +/** + * struct ieee80211_sta - station table entry + * + * A station table entry represents a station we are possibly + * communicating with. Since stations are RCU-managed in + * mac80211, any ieee80211_sta pointer you get access to must + * either be protected by rcu_read_lock() explicitly or implicitly, + * or you must take good care to not use such a pointer after a + * call to your sta_remove callback that removed it. + * + * @addr: MAC address + * @aid: AID we assigned to the station if we're an AP + * @supp_rates: Bitmap of supported rates (per band) + * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities + * @wme: indicates whether the STA supports WME. Only valid during AP-mode. + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *), size is determined in hw information. + * @uapsd_queues: bitmap of queues configured for uapsd. Only valid + * if wme is supported. + * @max_sp: max Service Period. Only valid if wme is supported. + */ +struct ieee80211_sta { + u32 supp_rates[IEEE80211_NUM_BANDS]; + u8 addr[ETH_ALEN]; + u16 aid; + struct ieee80211_sta_ht_cap ht_cap; + bool wme; + u8 uapsd_queues; + u8 max_sp; + + /* must be last */ + u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + +/** + * enum sta_notify_cmd - sta notify command + * + * Used with the sta_notify() callback in &struct ieee80211_ops, this + * indicates if an associated station made a power state transition. + * + * @STA_NOTIFY_SLEEP: a station is now sleeping + * @STA_NOTIFY_AWAKE: a sleeping station woke up + */ +enum sta_notify_cmd { + STA_NOTIFY_SLEEP, STA_NOTIFY_AWAKE, +}; + +/** + * enum ieee80211_hw_flags - hardware flags + * + * These flags are used to indicate hardware capabilities to + * the stack. Generally, flags here should have their meaning + * done in a way that the simplest hardware doesn't need setting + * any particular flags. There are some exceptions to this rule, + * however, so you are advised to review these flags carefully. + * + * @IEEE80211_HW_HAS_RATE_CONTROL: + * The hardware or firmware includes rate control, and cannot be + * controlled by the stack. As such, no rate control algorithm + * should be instantiated, and the TX rate reported to userspace + * will be taken from the TX status instead of the rate control + * algorithm. + * Note that this requires that the driver implement a number of + * callbacks so it has the correct information, it needs to have + * the @set_rts_threshold callback and must look at the BSS config + * @use_cts_prot for G/N protection, @use_short_slot for slot + * timing in 2.4 GHz and @use_short_preamble for preambles for + * CCK frames. + * + * @IEEE80211_HW_RX_INCLUDES_FCS: + * Indicates that received frames passed to the stack include + * the FCS at the end. + * + * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING: + * Some wireless LAN chipsets buffer broadcast/multicast frames + * for power saving stations in the hardware/firmware and others + * rely on the host system for such buffering. This option is used + * to configure the IEEE 802.11 upper layer to buffer broadcast and + * multicast frames when there are power saving stations so that + * the driver can fetch them with ieee80211_get_buffered_bc(). + * + * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE: + * Hardware is not capable of short slot operation on the 2.4 GHz band. + * + * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE: + * Hardware is not capable of receiving frames with short preamble on + * the 2.4 GHz band. + * + * @IEEE80211_HW_SIGNAL_UNSPEC: + * Hardware can provide signal values but we don't know its units. We + * expect values between 0 and @max_signal. + * If possible please provide dB or dBm instead. + * + * @IEEE80211_HW_SIGNAL_DBM: + * Hardware gives signal values in dBm, decibel difference from + * one milliwatt. This is the preferred method since it is standardized + * between different devices. @max_signal does not need to be set. + * + * @IEEE80211_HW_SPECTRUM_MGMT: + * Hardware supports spectrum management defined in 802.11h + * Measurement, Channel Switch, Quieting, TPC + * + * @IEEE80211_HW_AMPDU_AGGREGATION: + * Hardware supports 11n A-MPDU aggregation. + * + * @IEEE80211_HW_SUPPORTS_PS: + * Hardware has power save support (i.e. can go to sleep). + * + * @IEEE80211_HW_PS_NULLFUNC_STACK: + * Hardware requires nullfunc frame handling in stack, implies + * stack support for dynamic PS. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS: + * Hardware has support for dynamic PS. + * + * @IEEE80211_HW_MFP_CAPABLE: + * Hardware supports management frame protection (MFP, IEEE 802.11w). + * + * @IEEE80211_HW_BEACON_FILTER: + * Hardware supports dropping of irrelevant beacon frames to + * avoid waking up cpu. + * + * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: + * Hardware supports static spatial multiplexing powersave, + * ie. can turn off all but one chain even on HT connections + * that should be using more chains. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS: + * Hardware supports dynamic spatial multiplexing powersave, + * ie. can turn off all but one chain and then wake the rest + * up as required after, for example, rts/cts handshake. + * + * @IEEE80211_HW_SUPPORTS_UAPSD: + * Hardware supports Unscheduled Automatic Power Save Delivery + * (U-APSD) in managed mode. The mode is configured with + * conf_tx() operation. + * + * @IEEE80211_HW_REPORTS_TX_ACK_STATUS: + * Hardware can provide ack status reports of Tx frames to + * the stack. + * + * @IEEE80211_HW_CONNECTION_MONITOR: + * The hardware performs its own connection monitoring, including + * periodic keep-alives to the AP and probing the AP on beacon loss. + * When this flag is set, signaling beacon-loss will cause an immediate + * change to disassociated state. + * + * @IEEE80211_HW_SUPPORTS_CQM_RSSI: + * Hardware can do connection quality monitoring - i.e. it can monitor + * connection quality related parameters, such as the RSSI level and + * provide notifications if configured trigger levels are reached. + * + * @IEEE80211_HW_NEED_DTIM_PERIOD: + * This device needs to know the DTIM period for the BSS before + * associating. + * + * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports + * per-station GTKs as used by IBSS RSN or during fast transition. If + * the device doesn't support per-station GTKs, but can be asked not + * to decrypt group addressed frames, then IBSS RSN support is still + * possible but software crypto will be used. Advertise the wiphy flag + * only in that case. + * + * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device + * autonomously manages the PS status of connected stations. When + * this flag is set mac80211 will not trigger PS mode for connected + * stations based on the PM bit of incoming frames. + * Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure + * the PS mode of connected stations. + * + * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session + * setup strictly in HW. mac80211 should not attempt to do this in + * software. + */ +enum ieee80211_hw_flags { + IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, + IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, + IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, + IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, + IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, + IEEE80211_HW_SIGNAL_DBM = 1<<6, + IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7, + IEEE80211_HW_SPECTRUM_MGMT = 1<<8, + IEEE80211_HW_AMPDU_AGGREGATION = 1<<9, + IEEE80211_HW_SUPPORTS_PS = 1<<10, + IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, + IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, + IEEE80211_HW_MFP_CAPABLE = 1<<13, + IEEE80211_HW_BEACON_FILTER = 1<<14, + IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, + IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, + IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, + IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, + IEEE80211_HW_CONNECTION_MONITOR = 1<<19, + IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, + IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, + IEEE80211_HW_AP_LINK_PS = 1<<22, + IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, +}; + +/** + * struct ieee80211_hw - hardware information and state + * + * This structure contains the configuration and hardware + * information for an 802.11 PHY. + * + * @wiphy: This points to the &struct wiphy allocated for this + * 802.11 PHY. You must fill in the @perm_addr and @dev + * members of this structure using SET_IEEE80211_DEV() + * and SET_IEEE80211_PERM_ADDR(). Additionally, all supported + * bands (with channels, bitrates) are registered here. + * + * @conf: &struct ieee80211_conf, device configuration, don't use. + * + * @priv: pointer to private area that was allocated for driver use + * along with this structure. + * + * @flags: hardware flags, see &enum ieee80211_hw_flags. + * + * @extra_tx_headroom: headroom to reserve in each transmit skb + * for use by the driver (e.g. for transmit headers.) + * + * @channel_change_time: time (in microseconds) it takes to change channels. + * + * @max_signal: Maximum value for signal (rssi) in RX information, used + * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB + * + * @max_listen_interval: max listen interval in units of beacon interval + * that HW supports + * + * @queues: number of available hardware transmit queues for + * data packets. WMM/QoS requires at least four, these + * queues need to have configurable access parameters. + * + * @rate_control_algorithm: rate control algorithm for this hardware. + * If unset (NULL), the default algorithm will be used. Must be + * set before calling ieee80211_register_hw(). + * + * @vif_data_size: size (in bytes) of the drv_priv data area + * within &struct ieee80211_vif. + * @sta_data_size: size (in bytes) of the drv_priv data area + * within &struct ieee80211_sta. + * + * @max_rates: maximum number of alternate rate retry stages the hw + * can handle. + * @max_report_rates: maximum number of alternate rate retry stages + * the hw can report back. + * @max_rate_tries: maximum number of tries for each stage + * + * @napi_weight: weight used for NAPI polling. You must specify an + * appropriate value here if a napi_poll operation is provided + * by your driver. + * + * @max_rx_aggregation_subframes: maximum buffer size (number of + * sub-frames) to be used for A-MPDU block ack receiver + * aggregation. + * This is only relevant if the device has restrictions on the + * number of subframes, if it relies on mac80211 to do reordering + * it shouldn't be set. + * + * @max_tx_aggregation_subframes: maximum number of subframes in an + * aggregate an HT driver will transmit, used by the peer as a + * hint to size its reorder buffer. + */ +struct ieee80211_hw { + struct ieee80211_conf conf; + struct wiphy *wiphy; + const char *rate_control_algorithm; + void *priv; + u32 flags; + unsigned int extra_tx_headroom; + int channel_change_time; + int vif_data_size; + int sta_data_size; + int napi_weight; + u16 queues; + u16 max_listen_interval; + s8 max_signal; + u8 max_rates; + u8 max_report_rates; + u8 max_rate_tries; + u8 max_rx_aggregation_subframes; + u8 max_tx_aggregation_subframes; +}; + +/** + * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy + * + * @wiphy: the &struct wiphy which we want to query + * + * mac80211 drivers can use this to get to their respective + * &struct ieee80211_hw. Drivers wishing to get to their own private + * structure can then access it via hw->priv. Note that mac802111 drivers should + * not use wiphy_priv() to try to get their private driver structure as this + * is already used internally by mac80211. + */ +struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy); + +/** + * SET_IEEE80211_DEV - set device for 802.11 hardware + * + * @hw: the &struct ieee80211_hw to set the device for + * @dev: the &struct device of this 802.11 device + */ +static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev) +{ + set_wiphy_dev(hw->wiphy, dev); +} + +/** + * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware + * + * @hw: the &struct ieee80211_hw to set the MAC address for + * @addr: the address to set + */ +static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) +{ + memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); +} + +static inline struct ieee80211_rate * +ieee80211_get_tx_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c) +{ + if (WARN_ON(c->control.rates[0].idx < 0)) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c) +{ + if (c->control.rts_cts_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c, int idx) +{ + if (c->control.rates[idx + 1].idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx]; +} + +/** + * ieee80211_free_txskb - free TX skb + * @hw: the hardware + * @skb: the skb + * + * Free a transmit skb. Use this funtion when some failure + * to transmit happened and thus status cannot be reported. + */ +void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); + +/** + * DOC: Hardware crypto acceleration + * + * mac80211 is capable of taking advantage of many hardware + * acceleration designs for encryption and decryption operations. + * + * The set_key() callback in the &struct ieee80211_ops for a given + * device is called to enable hardware acceleration of encryption and + * decryption. The callback takes a @sta parameter that will be NULL + * for default keys or keys used for transmission only, or point to + * the station information for the peer for individual keys. + * Multiple transmission keys with the same key index may be used when + * VLANs are configured for an access point. + * + * When transmitting, the TX control data will use the @hw_key_idx + * selected by the driver by modifying the &struct ieee80211_key_conf + * pointed to by the @key parameter to the set_key() function. + * + * The set_key() call for the %SET_KEY command should return 0 if + * the key is now in use, -%EOPNOTSUPP or -%ENOSPC if it couldn't be + * added; if you return 0 then hw_key_idx must be assigned to the + * hardware key index, you are free to use the full u8 range. + * + * When the cmd is %DISABLE_KEY then it must succeed. + * + * Note that it is permissible to not decrypt a frame even if a key + * for it has been uploaded to hardware, the stack will not make any + * decision based on whether a key has been uploaded or not but rather + * based on the receive flags. + * + * The &struct ieee80211_key_conf structure pointed to by the @key + * parameter is guaranteed to be valid until another call to set_key() + * removes it, but it can only be used as a cookie to differentiate + * keys. + * + * In TKIP some HW need to be provided a phase 1 key, for RX decryption + * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key + * handler. + * The update_tkip_key() call updates the driver with the new phase 1 key. + * This happens every time the iv16 wraps around (every 65536 packets). The + * set_key() call will happen only once for each key (unless the AP did + * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is + * provided by update_tkip_key only. The trigger that makes mac80211 call this + * handler is software decryption with wrap around of iv16. + */ + +/** + * DOC: Powersave support + * + * mac80211 has support for various powersave implementations. + * + * First, it can support hardware that handles all powersaving by itself, + * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware + * flag. In that case, it will be told about the desired powersave mode + * with the %IEEE80211_CONF_PS flag depending on the association status. + * The hardware must take care of sending nullfunc frames when necessary, + * i.e. when entering and leaving powersave mode. The hardware is required + * to look at the AID in beacons and signal to the AP that it woke up when + * it finds traffic directed to it. + * + * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in + * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused + * with hardware wakeup and sleep states. Driver is responsible for waking + * up the hardware before issuing commands to the hardware and putting it + * back to sleep at appropriate times. + * + * When PS is enabled, hardware needs to wakeup for beacons and receive the + * buffered multicast/broadcast frames after the beacon. Also it must be + * possible to send frames and receive the acknowledment frame. + * + * Other hardware designs cannot send nullfunc frames by themselves and also + * need software support for parsing the TIM bitmap. This is also supported + * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and + * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still + * required to pass up beacons. The hardware is still required to handle + * waking up for multicast traffic; if it cannot the driver must handle that + * as best as it can, mac80211 is too slow to do that. + * + * Dynamic powersave is an extension to normal powersave in which the + * hardware stays awake for a user-specified period of time after sending a + * frame so that reply frames need not be buffered and therefore delayed to + * the next wakeup. It's compromise of getting good enough latency when + * there's data traffic and still saving significantly power in idle + * periods. + * + * Dynamic powersave is simply supported by mac80211 enabling and disabling + * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS + * flag and mac80211 will handle everything automatically. Additionally, + * hardware having support for the dynamic PS feature may set the + * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support + * dynamic PS mode itself. The driver needs to look at the + * @dynamic_ps_timeout hardware configuration value and use it that value + * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable + * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS + * enabled whenever user has enabled powersave. + * + * Some hardware need to toggle a single shared antenna between WLAN and + * Bluetooth to facilitate co-existence. These types of hardware set + * limitations on the use of host controlled dynamic powersave whenever there + * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the + * driver may request temporarily going into full power save, in order to + * enable toggling the antenna between BT and WLAN. If the driver requests + * disabling dynamic powersave, the @dynamic_ps_timeout value will be + * temporarily set to zero until the driver re-enables dynamic powersave. + * + * Driver informs U-APSD client support by enabling + * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the + * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS + * Nullfunc frames and stay awake until the service period has ended. To + * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames + * from that AC are transmitted with powersave enabled. + * + * Note: U-APSD client mode is not yet supported with + * %IEEE80211_HW_PS_NULLFUNC_STACK. + */ + +/** + * DOC: Beacon filter support + * + * Some hardware have beacon filter support to reduce host cpu wakeups + * which will reduce system power consumption. It usuallly works so that + * the firmware creates a checksum of the beacon but omits all constantly + * changing elements (TSF, TIM etc). Whenever the checksum changes the + * beacon is forwarded to the host, otherwise it will be just dropped. That + * way the host will only receive beacons where some relevant information + * (for example ERP protection or WMM settings) have changed. + * + * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER + * hardware capability. The driver needs to enable beacon filter support + * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When + * power save is enabled, the stack will not check for beacon loss and the + * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). + * + * The time (or number of beacons missed) until the firmware notifies the + * driver of a beacon loss event (which in turn causes the driver to call + * ieee80211_beacon_loss()) should be configurable and will be controlled + * by mac80211 and the roaming algorithm in the future. + * + * Since there may be constantly changing information elements that nothing + * in the software stack cares about, we will, in the future, have mac80211 + * tell the driver which information elements are interesting in the sense + * that we want to see changes in them. This will include + * - a list of information element IDs + * - a list of OUIs for the vendor information element + * + * Ideally, the hardware would filter out any beacons without changes in the + * requested elements, but if it cannot support that it may, at the expense + * of some efficiency, filter out only a subset. For example, if the device + * doesn't support checking for OUIs it should pass up all changes in all + * vendor information elements. + * + * Note that change, for the sake of simplification, also includes information + * elements appearing or disappearing from the beacon. + * + * Some hardware supports an "ignore list" instead, just make sure nothing + * that was requested is on the ignore list, and include commonly changing + * information element IDs in the ignore list, for example 11 (BSS load) and + * the various vendor-assigned IEs with unknown contents (128, 129, 133-136, + * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility + * it could also include some currently unused IDs. + * + * + * In addition to these capabilities, hardware should support notifying the + * host of changes in the beacon RSSI. This is relevant to implement roaming + * when no traffic is flowing (when traffic is flowing we see the RSSI of + * the received data packets). This can consist in notifying the host when + * the RSSI changes significantly or when it drops below or rises above + * configurable thresholds. In the future these thresholds will also be + * configured by mac80211 (which gets them from userspace) to implement + * them as the roaming algorithm requires. + * + * If the hardware cannot implement this, the driver should ask it to + * periodically pass beacon frames to the host so that software can do the + * signal strength threshold checking. + */ + +/** + * DOC: Spatial multiplexing power save + * + * SMPS (Spatial multiplexing power save) is a mechanism to conserve + * power in an 802.11n implementation. For details on the mechanism + * and rationale, please refer to 802.11 (as amended by 802.11n-2009) + * "11.2.3 SM power save". + * + * The mac80211 implementation is capable of sending action frames + * to update the AP about the station's SMPS mode, and will instruct + * the driver to enter the specific mode. It will also announce the + * requested SMPS mode during the association handshake. Hardware + * support for this feature is required, and can be indicated by + * hardware flags. + * + * The default mode will be "automatic", which nl80211/cfg80211 + * defines to be dynamic SMPS in (regular) powersave, and SMPS + * turned off otherwise. + * + * To support this feature, the driver must set the appropriate + * hardware support flags, and handle the SMPS flag to the config() + * operation. It will then with this mechanism be instructed to + * enter the requested SMPS mode while associated to an HT AP. + */ + +/** + * DOC: Frame filtering + * + * mac80211 requires to see many management frames for proper + * operation, and users may want to see many more frames when + * in monitor mode. However, for best CPU usage and power consumption, + * having as few frames as possible percolate through the stack is + * desirable. Hence, the hardware should filter as much as possible. + * + * To achieve this, mac80211 uses filter flags (see below) to tell + * the driver's configure_filter() function which frames should be + * passed to mac80211 and which should be filtered out. + * + * Before configure_filter() is invoked, the prepare_multicast() + * callback is invoked with the parameters @mc_count and @mc_list + * for the combined multicast address list of all virtual interfaces. + * It's use is optional, and it returns a u64 that is passed to + * configure_filter(). Additionally, configure_filter() has the + * arguments @changed_flags telling which flags were changed and + * @total_flags with the new flag states. + * + * If your device has no multicast address filters your driver will + * need to check both the %FIF_ALLMULTI flag and the @mc_count + * parameter to see whether multicast frames should be accepted + * or dropped. + * + * All unsupported flags in @total_flags must be cleared. + * Hardware does not support a flag if it is incapable of _passing_ + * the frame to the stack. Otherwise the driver must ignore + * the flag, but not clear it. + * You must _only_ clear the flag (announce no support for the + * flag to mac80211) if you are not able to pass the packet type + * to the stack (so the hardware always filters it). + * So for example, you should clear @FIF_CONTROL, if your hardware + * always filters control frames. If your hardware always passes + * control frames to the kernel and is incapable of filtering them, + * you do _not_ clear the @FIF_CONTROL flag. + * This rule applies to all other FIF flags as well. + */ + +/** + * DOC: AP support for powersaving clients + * + * In order to implement AP and P2P GO modes, mac80211 has support for + * client powersaving, both "legacy" PS (PS-Poll/null data) and uAPSD. + * There currently is no support for sAPSD. + * + * There is one assumption that mac80211 makes, namely that a client + * will not poll with PS-Poll and trigger with uAPSD at the same time. + * Both are supported, and both can be used by the same client, but + * they can't be used concurrently by the same client. This simplifies + * the driver code. + * + * The first thing to keep in mind is that there is a flag for complete + * driver implementation: %IEEE80211_HW_AP_LINK_PS. If this flag is set, + * mac80211 expects the driver to handle most of the state machine for + * powersaving clients and will ignore the PM bit in incoming frames. + * Drivers then use ieee80211_sta_ps_transition() to inform mac80211 of + * stations' powersave transitions. In this mode, mac80211 also doesn't + * handle PS-Poll/uAPSD. + * + * In the mode without %IEEE80211_HW_AP_LINK_PS, mac80211 will check the + * PM bit in incoming frames for client powersave transitions. When a + * station goes to sleep, we will stop transmitting to it. There is, + * however, a race condition: a station might go to sleep while there is + * data buffered on hardware queues. If the device has support for this + * it will reject frames, and the driver should give the frames back to + * mac80211 with the %IEEE80211_TX_STAT_TX_FILTERED flag set which will + * cause mac80211 to retry the frame when the station wakes up. The + * driver is also notified of powersave transitions by calling its + * @sta_notify callback. + * + * When the station is asleep, it has three choices: it can wake up, + * it can PS-Poll, or it can possibly start a uAPSD service period. + * Waking up is implemented by simply transmitting all buffered (and + * filtered) frames to the station. This is the easiest case. When + * the station sends a PS-Poll or a uAPSD trigger frame, mac80211 + * will inform the driver of this with the @allow_buffered_frames + * callback; this callback is optional. mac80211 will then transmit + * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE + * on each frame. The last frame in the service period (or the only + * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to + * indicate that it ends the service period; as this frame must have + * TX status report it also sets %IEEE80211_TX_CTL_REQ_TX_STATUS. + * When TX status is reported for this frame, the service period is + * marked has having ended and a new one can be started by the peer. + * + * Another race condition can happen on some devices like iwlwifi + * when there are frames queued for the station and it wakes up + * or polls; the frames that are already queued could end up being + * transmitted first instead, causing reordering and/or wrong + * processing of the EOSP. The cause is that allowing frames to be + * transmitted to a certain station is out-of-band communication to + * the device. To allow this problem to be solved, the driver can + * call ieee80211_sta_block_awake() if frames are buffered when it + * is notified that the station went to sleep. When all these frames + * have been filtered (see above), it must call the function again + * to indicate that the station is no longer blocked. + * + * If the driver buffers frames in the driver for aggregation in any + * way, it must use the ieee80211_sta_set_buffered() call when it is + * notified of the station going to sleep to inform mac80211 of any + * TIDs that have frames buffered. Note that when a station wakes up + * this information is reset (hence the requirement to call it when + * informed of the station going to sleep). Then, when a service + * period starts for any reason, @release_buffered_frames is called + * with the number of frames to be released and which TIDs they are + * to come from. In this case, the driver is responsible for setting + * the EOSP (for uAPSD) and MORE_DATA bits in the released frames, + * to help the @more_data paramter is passed to tell the driver if + * there is more data on other TIDs -- the TIDs to release frames + * from are ignored since mac80211 doesn't know how many frames the + * buffers for those TIDs contain. + * + * If the driver also implement GO mode, where absence periods may + * shorten service periods (or abort PS-Poll responses), it must + * filter those response frames except in the case of frames that + * are buffered in the driver -- those must remain buffered to avoid + * reordering. Because it is possible that no frames are released + * in this case, the driver must call ieee80211_sta_eosp_irqsafe() + * to indicate to mac80211 that the service period ended anyway. + * + * Finally, if frames from multiple TIDs are released from mac80211 + * but the driver might reorder them, it must clear & set the flags + * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP) + * and also take care of the EOSP and MORE_DATA bits in the frame. + * The driver may also use ieee80211_sta_eosp_irqsafe() in this case. + */ + +/** + * enum ieee80211_filter_flags - hardware filter flags + * + * These flags determine what the filter in hardware should be + * programmed to let through and what should not be passed to the + * stack. It is always safe to pass more frames than requested, + * but this has negative impact on power consumption. + * + * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS, + * think of the BSS as your network segment and then this corresponds + * to the regular ethernet device promiscuous mode. + * + * @FIF_ALLMULTI: pass all multicast frames, this is used if requested + * by the user or if the hardware is not capable of filtering by + * multicast address. + * + * @FIF_FCSFAIL: pass frames with failed FCS (but you need to set the + * %RX_FLAG_FAILED_FCS_CRC for them) + * + * @FIF_PLCPFAIL: pass frames with failed PLCP CRC (but you need to set + * the %RX_FLAG_FAILED_PLCP_CRC for them + * + * @FIF_BCN_PRBRESP_PROMISC: This flag is set during scanning to indicate + * to the hardware that it should not filter beacons or probe responses + * by BSSID. Filtering them can greatly reduce the amount of processing + * mac80211 needs to do and the amount of CPU wakeups, so you should + * honour this flag if possible. + * + * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS + * is not set then only those addressed to this station. + * + * @FIF_OTHER_BSS: pass frames destined to other BSSes + * + * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only + * those addressed to this station. + * + * @FIF_PROBE_REQ: pass probe request frames + */ +enum ieee80211_filter_flags { + FIF_PROMISC_IN_BSS = 1<<0, + FIF_ALLMULTI = 1<<1, + FIF_FCSFAIL = 1<<2, + FIF_PLCPFAIL = 1<<3, + FIF_BCN_PRBRESP_PROMISC = 1<<4, + FIF_CONTROL = 1<<5, + FIF_OTHER_BSS = 1<<6, + FIF_PSPOLL = 1<<7, + FIF_PROBE_REQ = 1<<8, +}; + +/** + * enum ieee80211_ampdu_mlme_action - A-MPDU actions + * + * These flags are used with the ampdu_action() callback in + * &struct ieee80211_ops to indicate which action is needed. + * + * Note that drivers MUST be able to deal with a TX aggregation + * session being stopped even before they OK'ed starting it by + * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer + * might receive the addBA frame and send a delBA right away! + * + * @IEEE80211_AMPDU_RX_START: start Rx aggregation + * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation + * @IEEE80211_AMPDU_TX_START: start Tx aggregation + * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation + * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational + */ +enum ieee80211_ampdu_mlme_action { + IEEE80211_AMPDU_RX_START, + IEEE80211_AMPDU_RX_STOP, + IEEE80211_AMPDU_TX_START, + IEEE80211_AMPDU_TX_STOP, + IEEE80211_AMPDU_TX_OPERATIONAL, +}; + +/** + * enum ieee80211_tx_sync_type - TX sync type + * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication + * (and possibly also before direct probe) + * @IEEE80211_TX_SYNC_ASSOC: sync TX for association + * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame + * (not implemented yet) + */ +enum ieee80211_tx_sync_type { + IEEE80211_TX_SYNC_AUTH, + IEEE80211_TX_SYNC_ASSOC, + IEEE80211_TX_SYNC_ACTION, +}; + +/** + * enum ieee80211_frame_release_type - frame release reason + * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll + * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to + * frame received on trigger-enabled AC + */ +enum ieee80211_frame_release_type { + IEEE80211_FRAME_RELEASE_PSPOLL, + IEEE80211_FRAME_RELEASE_UAPSD, +}; + +/** + * struct ieee80211_ops - callbacks from mac80211 to the driver + * + * This structure contains various callbacks that the driver may + * handle or, in some cases, must handle, for example to configure + * the hardware to a new channel or to transmit a frame. + * + * @tx: Handler that 802.11 module calls for each transmitted frame. + * skb contains the buffer starting from the IEEE 802.11 header. + * The low-level driver should send the frame out based on + * configuration in the TX control data. This handler should, + * preferably, never fail and stop queues appropriately, more + * importantly, however, it must never fail for A-MPDU-queues. + * This function should return NETDEV_TX_OK except in very + * limited cases. + * Must be implemented and atomic. + * + * @start: Called before the first netdevice attached to the hardware + * is enabled. This should turn on the hardware and must turn on + * frame reception (for possibly enabled monitor interfaces.) + * Returns negative error codes, these may be seen in userspace, + * or zero. + * When the device is started it should not have a MAC address + * to avoid acknowledging frames before a non-monitor device + * is added. + * Must be implemented and can sleep. + * + * @stop: Called after last netdevice attached to the hardware + * is disabled. This should turn off the hardware (at least + * it must turn off frame reception.) + * May be called right after add_interface if that rejects + * an interface. If you added any work onto the mac80211 workqueue + * you should ensure to cancel it on this callback. + * Must be implemented and can sleep. + * + * @suspend: Suspend the device; mac80211 itself will quiesce before and + * stop transmitting and doing any other configuration, and then + * ask the device to suspend. This is only invoked when WoWLAN is + * configured, otherwise the device is deconfigured completely and + * reconfigured at resume time. + * The driver may also impose special conditions under which it + * wants to use the "normal" suspend (deconfigure), say if it only + * supports WoWLAN when the device is associated. In this case, it + * must return 1 from this function. + * + * @resume: If WoWLAN was configured, this indicates that mac80211 is + * now resuming its operation, after this the device must be fully + * functional again. If this returns an error, the only way out is + * to also unregister the device. If it returns 1, then mac80211 + * will also go through the regular complete restart on resume. + * + * @add_interface: Called when a netdevice attached to the hardware is + * enabled. Because it is not called for monitor mode devices, @start + * and @stop must be implemented. + * The driver should perform any initialization it needs before + * the device can be enabled. The initial configuration for the + * interface is given in the conf parameter. + * The callback may refuse to add an interface by returning a + * negative error code (which will be seen in userspace.) + * Must be implemented and can sleep. + * + * @change_interface: Called when a netdevice changes type. This callback + * is optional, but only if it is supported can interface types be + * switched while the interface is UP. The callback may sleep. + * Note that while an interface is being switched, it will not be + * found by the interface iteration callbacks. + * + * @remove_interface: Notifies a driver that an interface is going down. + * The @stop callback is called after this if it is the last interface + * and no monitor interfaces are present. + * When all interfaces are removed, the MAC address in the hardware + * must be cleared so the device no longer acknowledges packets, + * the mac_addr member of the conf structure is, however, set to the + * MAC address of the device going away. + * Hence, this callback must be implemented. It can sleep. + * + * @config: Handler for configuration requests. IEEE 802.11 code calls this + * function to change hardware configuration, e.g., channel. + * This function should never fail but returns a negative error code + * if it does. The callback can sleep. + * + * @bss_info_changed: Handler for configuration requests related to BSS + * parameters that may vary during BSS's lifespan, and may affect low + * level driver (e.g. assoc/disassoc status, erp parameters). + * This function should not be used if no BSS has been set, unless + * for association indication. The @changed parameter indicates which + * of the bss parameters has changed when a call is made. The callback + * can sleep. + * + * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the + * driver should sync with the GO's powersaving so the device doesn't + * transmit the frame while the GO is asleep. In the regular AP case + * it may be used by drivers for devices implementing other restrictions + * on talking to APs, e.g. due to regulatory enforcement or just HW + * restrictions. + * This function is called for every authentication, association and + * action frame separately since applications might attempt to auth + * with multiple APs before chosing one to associate to. If it returns + * an error, the corresponding authentication, association or frame + * transmission is aborted and reported as having failed. It is always + * called after tuning to the correct channel. + * The callback might be called multiple times before @finish_tx_sync + * (but @finish_tx_sync will be called once for each) but in practice + * this is unlikely to happen. It can also refuse in that case if the + * driver cannot handle that situation. + * This callback can sleep. + * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned + * an error. This callback can sleep. + * + * @prepare_multicast: Prepare for multicast filter configuration. + * This callback is optional, and its return value is passed + * to configure_filter(). This callback must be atomic. + * + * @configure_filter: Configure the device's RX filter. + * See the section "Frame filtering" for more information. + * This callback must be implemented and can sleep. + * + * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit + * must be set or cleared for a given STA. Must be atomic. + * + * @set_key: See the section "Hardware crypto acceleration" + * This callback is only called between add_interface and + * remove_interface calls, i.e. while the given virtual interface + * is enabled. + * Returns a negative error code if the key can't be added. + * The callback can sleep. + * + * @update_tkip_key: See the section "Hardware crypto acceleration" + * This callback will be called in the context of Rx. Called for drivers + * which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY. + * The callback must be atomic. + * + * @set_rekey_data: If the device supports GTK rekeying, for example while the + * host is suspended, it can assign this callback to retrieve the data + * necessary to do GTK rekeying, this is the KEK, KCK and replay counter. + * After rekeying was done it should (for example during resume) notify + * userspace of the new replay counter using ieee80211_gtk_rekey_notify(). + * + * @hw_scan: Ask the hardware to service the scan request, no need to start + * the scan state machine in stack. The scan must honour the channel + * configuration done by the regulatory agent in the wiphy's + * registered bands. The hardware (or the driver) needs to make sure + * that power save is disabled. + * The @req ie/ie_len members are rewritten by mac80211 to contain the + * entire IEs after the SSID, so that drivers need not look at these + * at all but just send them after the SSID -- mac80211 includes the + * (extended) supported rates and HT information (where applicable). + * When the scan finishes, ieee80211_scan_completed() must be called; + * note that it also must be called when the scan cannot finish due to + * any error unless this callback returned a negative error code. + * The callback can sleep. + * + * @cancel_hw_scan: Ask the low-level tp cancel the active hw scan. + * The driver should ask the hardware to cancel the scan (if possible), + * but the scan will be completed only after the driver will call + * ieee80211_scan_completed(). + * This callback is needed for wowlan, to prevent enqueueing a new + * scan_work after the low-level driver was already suspended. + * The callback can sleep. + * + * @sched_scan_start: Ask the hardware to start scanning repeatedly at + * specific intervals. The driver must call the + * ieee80211_sched_scan_results() function whenever it finds results. + * This process will continue until sched_scan_stop is called. + * + * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan. + * + * @sw_scan_start: Notifier function that is called just before a software scan + * is started. Can be NULL, if the driver doesn't need this notification. + * The callback can sleep. + * + * @sw_scan_complete: Notifier function that is called just after a + * software scan finished. Can be NULL, if the driver doesn't need + * this notification. + * The callback can sleep. + * + * @get_stats: Return low-level statistics. + * Returns zero if statistics are available. + * The callback can sleep. + * + * @get_tkip_seq: If your device implements TKIP encryption in hardware this + * callback should be provided to read the TKIP transmit IVs (both IV32 + * and IV16) for the given key from hardware. + * The callback must be atomic. + * + * @set_frag_threshold: Configuration of fragmentation threshold. Assign this + * if the device does fragmentation by itself; if this callback is + * implemented then the stack will not do fragmentation. + * The callback can sleep. + * + * @set_rts_threshold: Configuration of RTS threshold (if device needs it) + * The callback can sleep. + * + * @sta_add: Notifies low level driver about addition of an associated station, + * AP, IBSS/WDS/mesh peer etc. This callback can sleep. + * + * @sta_remove: Notifies low level driver about removal of an associated + * station, AP, IBSS/WDS/mesh peer etc. This callback can sleep. + * + * @sta_notify: Notifies low level driver about power state transition of an + * associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating + * in AP mode, this callback will not be called when the flag + * %IEEE80211_HW_AP_LINK_PS is set. Must be atomic. + * + * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), + * bursting) for a hardware TX queue. + * Returns a negative error code on failure. + * The callback can sleep. + * + * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, + * this is only used for IBSS mode BSSID merging and debugging. Is not a + * required function. + * The callback can sleep. + * + * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware. + * Currently, this is only used for IBSS mode debugging. Is not a + * required function. + * The callback can sleep. + * + * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize + * with other STAs in the IBSS. This is only used in IBSS mode. This + * function is optional if the firmware/hardware takes full care of + * TSF synchronization. + * The callback can sleep. + * + * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. + * This is needed only for IBSS mode and the result of this function is + * used to determine whether to reply to Probe Requests. + * Returns non-zero if this device sent the last beacon. + * The callback can sleep. + * + * @ampdu_action: Perform a certain A-MPDU action + * The RA/TID combination determines the destination and TID we want + * the ampdu action to be performed for. The action is defined through + * ieee80211_ampdu_mlme_action. Starting sequence number (@ssn) + * is the first frame we expect to perform the action on. Notice + * that TX/RX_STOP can pass NULL for this parameter. + * The @buf_size parameter is only valid when the action is set to + * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder + * buffer size (number of subframes) for this session -- the driver + * may neither send aggregates containing more subframes than this + * nor send aggregates in a way that lost frames would exceed the + * buffer size. If just limiting the aggregate size, this would be + * possible with a buf_size of 8: + * - TX: 1.....7 + * - RX: 2....7 (lost frame #1) + * - TX: 8..1... + * which is invalid since #1 was now re-transmitted well past the + * buffer size of 8. Correct ways to retransmit #1 would be: + * - TX: 1 or 18 or 81 + * Even "189" would be wrong since 1 could be lost again. + * + * Returns a negative error code on failure. + * The callback can sleep. + * + * @get_survey: Return per-channel survey information + * + * @rfkill_poll: Poll rfkill hardware state. If you need this, you also + * need to set wiphy->rfkill_poll to %true before registration, + * and need to call wiphy_rfkill_set_hw_state() in the callback. + * The callback can sleep. + * + * @set_coverage_class: Set slot time for given coverage class as specified + * in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout + * accordingly. This callback is not required and may sleep. + * + * @testmode_cmd: Implement a cfg80211 test mode command. + * The callback can sleep. + * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep. + * + * @flush: Flush all pending frames from the hardware queue, making sure + * that the hardware queues are empty. If the parameter @drop is set + * to %true, pending frames may be dropped. The callback can sleep. + * + * @channel_switch: Drivers that need (or want) to offload the channel + * switch operation for CSAs received from the AP may implement this + * callback. They must then call ieee80211_chswitch_done() to indicate + * completion of the channel switch. + * + * @napi_poll: Poll Rx queue for incoming data frames. + * + * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. + * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may + * reject TX/RX mask combinations they cannot support by returning -EINVAL + * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). + * + * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). + * + * @remain_on_channel: Starts an off-channel period on the given channel, must + * call back to ieee80211_ready_on_channel() when on that channel. Note + * that normal channel traffic is not stopped as this is intended for hw + * offload. Frames to transmit on the off-channel channel are transmitted + * normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the + * duration (which will always be non-zero) expires, the driver must call + * ieee80211_remain_on_channel_expired(). This callback may sleep. + * @cancel_remain_on_channel: Requests that an ongoing off-channel period is + * aborted before it expires. This callback may sleep. + * + * @set_ringparam: Set tx and rx ring sizes. + * + * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tx_frames_pending: Check if there is any pending frame in the hardware + * queues before entering power save. + * + * @set_bitrate_mask: Set a mask of rates to be used for rate control selection + * when transmitting a frame. Currently only legacy rates are handled. + * The callback can sleep. + * @rssi_callback: Notify driver when the average RSSI goes above/below + * thresholds that were registered previously. The callback can sleep. + * + * @release_buffered_frames: Release buffered frames according to the given + * parameters. In the case where the driver buffers some frames for + * sleeping stations mac80211 will use this callback to tell the driver + * to release some frames, either for PS-poll or uAPSD. + * Note that if the @more_data paramter is %false the driver must check + * if there are more frames on the given TIDs, and if there are more than + * the frames being released then it must still set the more-data bit in + * the frame. If the @more_data parameter is %true, then of course the + * more-data bit must always be set. + * The @tids parameter tells the driver which TIDs to release frames + * from, for PS-poll it will always have only a single bit set. + * In the case this is used for a PS-poll initiated release, the + * @num_frames parameter will always be 1 so code can be shared. In + * this case the driver must also set %IEEE80211_TX_STATUS_EOSP flag + * on the TX status (and must report TX status) so that the PS-poll + * period is properly ended. This is used to avoid sending multiple + * responses for a retried PS-poll frame. + * In the case this is used for uAPSD, the @num_frames parameter may be + * bigger than one, but the driver may send fewer frames (it must send + * at least one, however). In this case it is also responsible for + * setting the EOSP flag in the QoS header of the frames. Also, when the + * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP + * on the last frame in the SP. Alternatively, it may call the function + * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP. + * This callback must be atomic. + * @allow_buffered_frames: Prepare device to allow the given number of frames + * to go out to the given station. The frames will be sent by mac80211 + * via the usual TX path after this call. The TX information for frames + * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set + * and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case + * frames from multiple TIDs are released and the driver might reorder + * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag + * on the last frame and clear it on all others and also handle the EOSP + * bit in the QoS header correctly. Alternatively, it can also call the + * ieee80211_sta_eosp_irqsafe() function. + * The @tids parameter is a bitmap and tells the driver which TIDs the + * frames will be on; it will at most have two bits set. + * This callback must be atomic. + */ +struct ieee80211_ops { + void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); + int (*start)(struct ieee80211_hw *hw); + void (*stop)(struct ieee80211_hw *hw); +#ifdef CONFIG_PM + int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan); + int (*resume)(struct ieee80211_hw *hw); +#endif + int (*add_interface)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*change_interface)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum nl80211_iftype new_type, bool p2p); + void (*remove_interface)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*config)(struct ieee80211_hw *hw, u32 changed); + void (*bss_info_changed)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed); + + int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + const u8 *bssid, enum ieee80211_tx_sync_type type); + void (*finish_tx_sync)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *bssid, + enum ieee80211_tx_sync_type type); + + u64 (*prepare_multicast)(struct ieee80211_hw *hw, +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)) + struct netdev_hw_addr_list *mc_list); +#else + int mc_count, struct dev_addr_list *mc_list); +#endif + void (*configure_filter)(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast); + int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, + bool set); + int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key); + void (*update_tkip_key)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *conf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key); + void (*set_rekey_data)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_gtk_rekey_data *data); + int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct cfg80211_scan_request *req); + void (*cancel_hw_scan)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*sched_scan_start)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_sched_scan_request *req, + struct ieee80211_sched_scan_ies *ies); + void (*sched_scan_stop)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + void (*sw_scan_start)(struct ieee80211_hw *hw); + void (*sw_scan_complete)(struct ieee80211_hw *hw); + int (*get_stats)(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats); + void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, + u32 *iv32, u16 *iv16); + int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); + int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); + int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum sta_notify_cmd, struct ieee80211_sta *sta); + int (*conf_tx)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, + const struct ieee80211_tx_queue_params *params); + u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u64 tsf); + void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + int (*tx_last_beacon)(struct ieee80211_hw *hw); + int (*ampdu_action)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, + u8 buf_size); + int (*get_survey)(struct ieee80211_hw *hw, int idx, + struct survey_info *survey); + void (*rfkill_poll)(struct ieee80211_hw *hw); + void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); + int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len); +#endif + void (*flush)(struct ieee80211_hw *hw, bool drop); + void (*channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_channel_switch *ch_switch); + int (*napi_poll)(struct ieee80211_hw *hw, int budget); + int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); + int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); + + int (*remain_on_channel)(struct ieee80211_hw *hw, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + int duration); + int (*cancel_remain_on_channel)(struct ieee80211_hw *hw); + int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx); + void (*get_ringparam)(struct ieee80211_hw *hw, + u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); + bool (*tx_frames_pending)(struct ieee80211_hw *hw); + int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + const struct cfg80211_bitrate_mask *mask); + void (*rssi_callback)(struct ieee80211_hw *hw, + enum ieee80211_rssi_event rssi_event); + + void (*allow_buffered_frames)(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u16 tids, int num_frames, + enum ieee80211_frame_release_type reason, + bool more_data); + void (*release_buffered_frames)(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u16 tids, int num_frames, + enum ieee80211_frame_release_type reason, + bool more_data); +}; + +/** + * ieee80211_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac80211 allocates a private data area for the driver pointed to by + * @priv in &struct ieee80211_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + */ +struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, + const struct ieee80211_ops *ops); + +/** + * ieee80211_register_hw - Register hardware device + * + * You must call this function before any other functions in + * mac80211. Note that before a hardware can be registered, you + * need to fill the contained wiphy's information. + * + * @hw: the device to register as returned by ieee80211_alloc_hw() + */ +int ieee80211_register_hw(struct ieee80211_hw *hw); + +/** + * struct ieee80211_tpt_blink - throughput blink description + * @throughput: throughput in Kbit/sec + * @blink_time: blink time in milliseconds + * (full cycle, ie. one off + one on period) + */ +struct ieee80211_tpt_blink { + int throughput; + int blink_time; +}; + +/** + * enum ieee80211_tpt_led_trigger_flags - throughput trigger flags + * @IEEE80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio + * @IEEE80211_TPT_LEDTRIG_FL_WORK: enable blinking when working + * @IEEE80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one + * interface is connected in some way, including being an AP + */ +enum ieee80211_tpt_led_trigger_flags { + IEEE80211_TPT_LEDTRIG_FL_RADIO = BIT(0), + IEEE80211_TPT_LEDTRIG_FL_WORK = BIT(1), + IEEE80211_TPT_LEDTRIG_FL_CONNECTED = BIT(2), +}; + +#ifdef CONFIG_MAC80211_LEDS +extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_create_tpt_led_trigger( + struct ieee80211_hw *hw, unsigned int flags, + const struct ieee80211_tpt_blink *blink_table, + unsigned int blink_table_len); +#endif +/** + * ieee80211_get_tx_led_name - get name of TX LED + * + * mac80211 creates a transmit LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_tx_led_name(hw); +#else + return NULL; +#endif +} + +/** + * ieee80211_get_rx_led_name - get name of RX LED + * + * mac80211 creates a receive LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_rx_led_name(hw); +#else + return NULL; +#endif +} + +/** + * ieee80211_get_assoc_led_name - get name of association LED + * + * mac80211 creates a association LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_assoc_led_name(hw); +#else + return NULL; +#endif +} + +/** + * ieee80211_get_radio_led_name - get name of radio LED + * + * mac80211 creates a radio change LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_radio_led_name(hw); +#else + return NULL; +#endif +} + +/** + * ieee80211_create_tpt_led_trigger - create throughput LED trigger + * @hw: the hardware to create the trigger for + * @flags: trigger flags, see &enum ieee80211_tpt_led_trigger_flags + * @blink_table: the blink table -- needs to be ordered by throughput + * @blink_table_len: size of the blink table + * + * This function returns %NULL (in case of error, or if no LED + * triggers are configured) or the name of the new trigger. + * This function must be called before ieee80211_register_hw(). + */ +static inline char * +ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags, + const struct ieee80211_tpt_blink *blink_table, + unsigned int blink_table_len) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_create_tpt_led_trigger(hw, flags, blink_table, + blink_table_len); +#else + return NULL; +#endif +} + +/** + * ieee80211_unregister_hw - Unregister a hardware device + * + * This function instructs mac80211 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ +void ieee80211_unregister_hw(struct ieee80211_hw *hw); + +/** + * ieee80211_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee80211_unregister_hw() + * before calling this function. + * + * @hw: the hardware to free + */ +void ieee80211_free_hw(struct ieee80211_hw *hw); + +/** + * ieee80211_restart_hw - restart hardware completely + * + * Call this function when the hardware was restarted for some reason + * (hardware error, ...) and the driver is unable to restore its state + * by itself. mac80211 assumes that at this point the driver/hardware + * is completely uninitialised and stopped, it starts the process by + * calling the ->start() operation. The driver will need to reset all + * internal state that it has prior to calling this function. + * + * @hw: the hardware to restart + */ +void ieee80211_restart_hw(struct ieee80211_hw *hw); + +/** ieee80211_napi_schedule - schedule NAPI poll + * + * Use this function to schedule NAPI polling on a device. + * + * @hw: the hardware to start polling + */ +void ieee80211_napi_schedule(struct ieee80211_hw *hw); + +/** ieee80211_napi_complete - complete NAPI polling + * + * Use this function to finish NAPI polling on a device. + * + * @hw: the hardware to stop polling + */ +void ieee80211_napi_complete(struct ieee80211_hw *hw); + +/** + * ieee80211_rx - receive frame + * + * Use this function to hand received frames to mac80211. The receive + * buffer in @skb must start with an IEEE 802.11 header. In case of a + * paged @skb is used, the driver is recommended to put the ieee80211 + * header of the frame on the linear part of the @skb to avoid memory + * allocation and/or memcpy by the stack. + * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. Calls to + * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be + * mixed for a single hardware. + * + * In process context use instead ieee80211_rx_ni(). + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + */ +void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); + +/** + * ieee80211_rx_irqsafe - receive frame + * + * Like ieee80211_rx() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not + * be mixed for a single hardware. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + */ +void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); + +/** + * ieee80211_rx_ni - receive frame (in process context) + * + * Like ieee80211_rx() but can be called in process context + * (internally disables bottom halves). + * + * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may + * not be mixed for a single hardware. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + */ +static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + local_bh_disable(); + ieee80211_rx(hw, skb); + local_bh_enable(); +} + +/** + * ieee80211_sta_ps_transition - PS transition for connected sta + * + * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS + * flag set, use this function to inform mac80211 about a connected station + * entering/leaving PS mode. + * + * This function may not be called in IRQ context or with softirqs enabled. + * + * Calls to this function for a single hardware must be synchronized against + * each other. + * + * The function returns -EINVAL when the requested PS mode is already set. + * + * @sta: currently connected sta + * @start: start or stop PS + */ +int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start); + +/** + * ieee80211_sta_ps_transition_ni - PS transition for connected sta + * (in process context) + * + * Like ieee80211_sta_ps_transition() but can be called in process context + * (internally disables bottom halves). Concurrent call restriction still + * applies. + * + * @sta: currently connected sta + * @start: start or stop PS + */ +static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, + bool start) +{ + int ret; + + local_bh_disable(); + ret = ieee80211_sta_ps_transition(sta, start); + local_bh_enable(); + + return ret; +} + +/* + * The TX headroom reserved by mac80211 for its own tx_status functions. + * This is enough for the radiotap header. + */ +#define IEEE80211_TX_STATUS_HEADROOM 14 + +/** + * ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames + * @sta: &struct ieee80211_sta pointer for the sleeping station + * @tid: the TID that has buffered frames + * @buffered: indicates whether or not frames are buffered for this TID + * + * If a driver buffers frames for a powersave station instead of passing + * them back to mac80211 for retransmission, the station may still need + * to be told that there are buffered frames via the TIM bit. + * + * This function informs mac80211 whether or not there are frames that are + * buffered in the driver for a given TID; mac80211 can then use this data + * to set the TIM bit (NOTE: This may call back into the driver's set_tim + * call! Beware of the locking!) + * + * If all frames are released to the station (due to PS-poll or uAPSD) + * then the driver needs to inform mac80211 that there no longer are + * frames buffered. However, when the station wakes up mac80211 assumes + * that all buffered frames will be transmitted and clears this data, + * drivers need to make sure they inform mac80211 about all buffered + * frames on the sleep transition (sta_notify() with %STA_NOTIFY_SLEEP). + * + * Note that technically mac80211 only needs to know this per AC, not per + * TID, but since driver buffering will inevitably happen per TID (since + * it is related to aggregation) it is easier to make mac80211 map the + * TID to the AC as required instead of keeping track in all drivers that + * use this API. + */ +void ieee80211_sta_set_buffered(struct ieee80211_sta *sta, + u8 tid, bool buffered); + +/** + * ieee80211_tx_status - transmit status callback + * + * Call this function for all transmitted frames after they have been + * transmitted. It is permissible to not call this function for + * multicast frames but this can affect statistics. + * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. Calls + * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() + * may not be mixed for a single hardware. + * + * @hw: the hardware the frame was transmitted by + * @skb: the frame that was transmitted, owned by mac80211 after this call + */ +void ieee80211_tx_status(struct ieee80211_hw *hw, + struct sk_buff *skb); + +/** + * ieee80211_tx_status_ni - transmit status callback (in process context) + * + * Like ieee80211_tx_status() but can be called in process context. + * + * Calls to this function, ieee80211_tx_status() and + * ieee80211_tx_status_irqsafe() may not be mixed + * for a single hardware. + * + * @hw: the hardware the frame was transmitted by + * @skb: the frame that was transmitted, owned by mac80211 after this call + */ +static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + local_bh_disable(); + ieee80211_tx_status(hw, skb); + local_bh_enable(); +} + +/** + * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback + * + * Like ieee80211_tx_status() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * Calls to this function, ieee80211_tx_status() and + * ieee80211_tx_status_ni() may not be mixed for a single hardware. + * + * @hw: the hardware the frame was transmitted by + * @skb: the frame that was transmitted, owned by mac80211 after this call + */ +void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb); + +/** + * ieee80211_report_low_ack - report non-responding station + * + * When operating in AP-mode, call this function to report a non-responding + * connected STA. + * + * @sta: the non-responding connected sta + * @num_packets: number of packets sent to @sta without a response + */ +void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); + +/** + * ieee80211_beacon_get_tim - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @tim_offset: pointer to variable that will receive the TIM IE offset. + * Set to 0 if invalid (in non-AP modes). + * @tim_length: pointer to variable that will receive the TIM IE length, + * (including the ID and length bytes!). + * Set to 0 if invalid (in non-AP modes). + * + * If the driver implements beaconing modes, it must use this function to + * obtain the beacon frame/template. + * + * If the beacon frames are generated by the host system (i.e., not in + * hardware/firmware), the driver uses this function to get each beacon + * frame from mac80211 -- it is responsible for calling this function + * before the beacon is needed (e.g. based on hardware interrupt). + * + * If the beacon frames are generated by the device, then the driver + * must use the returned beacon as the template and change the TIM IE + * according to the current DTIM parameters/TIM bitmap. + * + * The driver is responsible for freeing the returned skb. + */ +struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u16 *tim_offset, u16 *tim_length); + +/** + * ieee80211_beacon_get - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * See ieee80211_beacon_get_tim(). + */ +static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + return ieee80211_beacon_get_tim(hw, vif, NULL, NULL); +} + +/** + * ieee80211_proberesp_get - retrieve a Probe Response template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Probe Response template which can, for example, be uploaded to + * hardware. The destination address should be set by the caller. + * + * Can only be called in AP mode. + */ +struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_pspoll_get - retrieve a PS Poll template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a PS Poll a template which can, for example, uploaded to + * hardware. The template must be updated after association so that correct + * AID, BSSID and MAC address is used. + * + * Note: Caller (or hardware) is responsible for setting the + * &IEEE80211_FCTL_PM bit. + */ +struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_nullfunc_get - retrieve a nullfunc template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Nullfunc template which can, for example, uploaded to + * hardware. The template must be updated after association so that correct + * BSSID and address is used. + * + * Note: Caller (or hardware) is responsible for setting the + * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields. + */ +struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_probereq_get - retrieve a Probe Request template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @ssid: SSID buffer + * @ssid_len: length of SSID + * @ie: buffer containing all IEs except SSID for the template + * @ie_len: length of the IE buffer + * + * Creates a Probe Request template which can, for example, be uploaded to + * hardware. + */ +struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len); + +/** + * ieee80211_rts_get - RTS frame generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @frame: pointer to the frame that is going to be protected by the RTS. + * @frame_len: the frame length (in octets). + * @frame_txctl: &struct ieee80211_tx_info of the frame. + * @rts: The buffer where to store the RTS frame. + * + * If the RTS frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next RTS frame from the 802.11 code. The low-level is responsible + * for calling this function before and RTS frame is needed. + */ +void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + const void *frame, size_t frame_len, + const struct ieee80211_tx_info *frame_txctl, + struct ieee80211_rts *rts); + +/** + * ieee80211_rts_duration - Get the duration field for an RTS frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @frame_len: the length of the frame that is going to be protected by the RTS. + * @frame_txctl: &struct ieee80211_tx_info of the frame. + * + * If the RTS is generated in firmware, but the host system must provide + * the duration field, the low-level driver uses this function to receive + * the duration field value in little-endian byteorder. + */ +__le16 ieee80211_rts_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, size_t frame_len, + const struct ieee80211_tx_info *frame_txctl); + +/** + * ieee80211_ctstoself_get - CTS-to-self frame generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @frame: pointer to the frame that is going to be protected by the CTS-to-self. + * @frame_len: the frame length (in octets). + * @frame_txctl: &struct ieee80211_tx_info of the frame. + * @cts: The buffer where to store the CTS-to-self frame. + * + * If the CTS-to-self frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next CTS-to-self frame from the 802.11 code. The low-level is responsible + * for calling this function before and CTS-to-self frame is needed. + */ +void ieee80211_ctstoself_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const void *frame, size_t frame_len, + const struct ieee80211_tx_info *frame_txctl, + struct ieee80211_cts *cts); + +/** + * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. + * @frame_txctl: &struct ieee80211_tx_info of the frame. + * + * If the CTS-to-self is generated in firmware, but the host system must provide + * the duration field, the low-level driver uses this function to receive + * the duration field value in little-endian byteorder. + */ +__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + size_t frame_len, + const struct ieee80211_tx_info *frame_txctl); + +/** + * ieee80211_generic_frame_duration - Calculate the duration field for a frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @frame_len: the length of the frame. + * @rate: the rate at which the frame is going to be transmitted. + * + * Calculate the duration field of some generic frame, given its + * length and transmission rate (in 100kbps). + */ +__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + size_t frame_len, + struct ieee80211_rate *rate); + +/** + * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Function for accessing buffered broadcast and multicast frames. If + * hardware/firmware does not implement buffering of broadcast/multicast + * frames when power saving is used, 802.11 code buffers them in the host + * memory. The low-level driver uses this function to fetch next buffered + * frame. In most cases, this is used when generating beacon frame. This + * function returns a pointer to the next buffered skb or NULL if no more + * buffered frames are available. + * + * Note: buffered frames are returned only after DTIM beacon frame was + * generated with ieee80211_beacon_get() and the low-level driver must thus + * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns + * NULL if the previous generated beacon was not DTIM, so the low-level driver + * does not need to check for DTIM beacons separately and should be able to + * use common code for all beacons. + */ +struct sk_buff * +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + +/** + * ieee80211_get_tkip_p1k_iv - get a TKIP phase 1 key for IV32 + * + * This function returns the TKIP phase 1 key for the given IV32. + * + * @keyconf: the parameter passed with the set key + * @iv32: IV32 to get the P1K for + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf, + u32 iv32, u16 *p1k); + +/** + * ieee80211_get_tkip_p1k - get a TKIP phase 1 key + * + * This function returns the TKIP phase 1 key for the IV32 taken + * from the given packet. + * + * @keyconf: the parameter passed with the set key + * @skb: the packet to take the IV32 value from that will be encrypted + * with this P1K + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +static inline void ieee80211_get_tkip_p1k(struct ieee80211_key_conf *keyconf, + struct sk_buff *skb, u16 *p1k) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control); + u32 iv32 = get_unaligned_le32(&data[4]); + + ieee80211_get_tkip_p1k_iv(keyconf, iv32, p1k); +} + +/** + * ieee80211_get_tkip_rx_p1k - get a TKIP phase 1 key for RX + * + * This function returns the TKIP phase 1 key for the given IV32 + * and transmitter address. + * + * @keyconf: the parameter passed with the set key + * @ta: TA that will be used with the key + * @iv32: IV32 to get the P1K for + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +void ieee80211_get_tkip_rx_p1k(struct ieee80211_key_conf *keyconf, + const u8 *ta, u32 iv32, u16 *p1k); + +/** + * ieee80211_get_tkip_p2k - get a TKIP phase 2 key + * + * This function computes the TKIP RC4 key for the IV values + * in the packet. + * + * @keyconf: the parameter passed with the set key + * @skb: the packet to take the IV32/IV16 values from that will be + * encrypted with this key + * @p2k: a buffer to which the key will be written, 16 bytes + */ +void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, + struct sk_buff *skb, u8 *p2k); + +/** + * struct ieee80211_key_seq - key sequence counter + * + * @tkip: TKIP data, containing IV32 and IV16 in host byte order + * @ccmp: PN data, most significant byte first (big endian, + * reverse order than in packet) + * @aes_cmac: PN data, most significant byte first (big endian, + * reverse order than in packet) + */ +struct ieee80211_key_seq { + union { + struct { + u32 iv32; + u16 iv16; + } tkip; + struct { + u8 pn[6]; + } ccmp; + struct { + u8 pn[6]; + } aes_cmac; + }; +}; + +/** + * ieee80211_get_key_tx_seq - get key TX sequence counter + * + * @keyconf: the parameter passed with the set key + * @seq: buffer to receive the sequence data + * + * This function allows a driver to retrieve the current TX IV/PN + * for the given key. It must not be called if IV generation is + * offloaded to the device. + * + * Note that this function may only be called when no TX processing + * can be done concurrently, for example when queues are stopped + * and the stop has been synchronized. + */ +void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf, + struct ieee80211_key_seq *seq); + +/** + * ieee80211_get_key_rx_seq - get key RX sequence counter + * + * @keyconf: the parameter passed with the set key + * @tid: The TID, or -1 for the management frame value (CCMP only); + * the value on TID 0 is also used for non-QoS frames. For + * CMAC, only TID 0 is valid. + * @seq: buffer to receive the sequence data + * + * This function allows a driver to retrieve the current RX IV/PNs + * for the given key. It must not be called if IV checking is done + * by the device and not by mac80211. + * + * Note that this function may only be called when no RX processing + * can be done concurrently. + */ +void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf, + int tid, struct ieee80211_key_seq *seq); + +/** + * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying + * @vif: virtual interface the rekeying was done on + * @bssid: The BSSID of the AP, for checking association + * @replay_ctr: the new replay counter after GTK rekeying + * @gfp: allocation flags + */ +void ieee80211_gtk_rekey_notify(struct ieee80211_vif *vif, const u8 *bssid, + const u8 *replay_ctr, gfp_t gfp); + +/** + * ieee80211_wake_queue - wake specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_wake_queue. + */ +void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_stop_queue - stop specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_queue_stopped - test status of the queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_stop_queue. + */ + +int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_stop_queues - stop all queues + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_wake_queues - wake all queues + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_wake_queue. + */ +void ieee80211_wake_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_scan_completed - completed hardware scan + * + * When hardware scan offload is used (i.e. the hw_scan() callback is + * assigned) this function needs to be called by the driver to notify + * mac80211 that the scan finished. This function can be called from + * any context, including hardirq context. + * + * @hw: the hardware that finished the scan + * @aborted: set to true if scan was aborted + */ +void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted); + +/** + * ieee80211_sched_scan_results - got results from scheduled scan + * + * When a scheduled scan is running, this function needs to be called by the + * driver whenever there are new scan results available. + * + * @hw: the hardware that is performing scheduled scans + */ +void ieee80211_sched_scan_results(struct ieee80211_hw *hw); + +/** + * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped + * + * When a scheduled scan is running, this function can be called by + * the driver if it needs to stop the scan to perform another task. + * Usual scenarios are drivers that cannot continue the scheduled scan + * while associating, for instance. + * + * @hw: the hardware that is performing scheduled scans + */ +void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw); + +/** + * ieee80211_iterate_active_interfaces - iterate active interfaces + * + * This function iterates over the interfaces associated with a given + * hardware that are currently active and calls the callback for them. + * This function allows the iterator function to sleep, when the iterator + * function is atomic @ieee80211_iterate_active_interfaces_atomic can + * be used. + * Does not iterate over a new interface during add_interface() + * + * @hw: the hardware struct of which the interfaces should be iterated over + * @iterator: the iterator function to call + * @data: first argument of the iterator function + */ +void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, + void (*iterator)(void *data, u8 *mac, + struct ieee80211_vif *vif), + void *data); + +/** + * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces + * + * This function iterates over the interfaces associated with a given + * hardware that are currently active and calls the callback for them. + * This function requires the iterator callback function to be atomic, + * if that is not desired, use @ieee80211_iterate_active_interfaces instead. + * Does not iterate over a new interface during add_interface() + * + * @hw: the hardware struct of which the interfaces should be iterated over + * @iterator: the iterator function to call, cannot sleep + * @data: first argument of the iterator function + */ +void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, + void (*iterator)(void *data, + u8 *mac, + struct ieee80211_vif *vif), + void *data); + +/** + * ieee80211_queue_work - add work onto the mac80211 workqueue + * + * Drivers and mac80211 use this to add work onto the mac80211 workqueue. + * This helper ensures drivers are not queueing work when they should not be. + * + * @hw: the hardware struct for the interface we are adding work for + * @work: the work we want to add onto the mac80211 workqueue + */ +void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work); + +/** + * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue + * + * Drivers and mac80211 use this to queue delayed work onto the mac80211 + * workqueue. + * + * @hw: the hardware struct for the interface we are adding work for + * @dwork: delayable work to queue onto the mac80211 workqueue + * @delay: number of jiffies to wait before queueing + */ +void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, + struct delayed_work *dwork, + unsigned long delay); + +/** + * ieee80211_start_tx_ba_session - Start a tx Block Ack session. + * @sta: the station for which to start a BA session + * @tid: the TID to BA on. + * @timeout: session timeout value (in TUs) + * + * Return: success if addBA request was sent, failure otherwise + * + * Although mac80211/low level driver/user space application can estimate + * the need to start aggregation on a certain RA/TID, the session level + * will be managed by the mac80211. + */ +int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid, + u16 timeout); + +/** + * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. + * @vif: &struct ieee80211_vif pointer from the add_interface callback + * @ra: receiver address of the BA session recipient. + * @tid: the TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session. It can be called + * from any context. + */ +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, + u16 tid); + +/** + * ieee80211_stop_tx_ba_session - Stop a Block Ack session. + * @sta: the station whose BA session to stop + * @tid: the TID to stop BA. + * + * Return: negative error if the TID is invalid, or no aggregation active + * + * Although mac80211/low level driver/user space application can estimate + * the need to stop aggregation on a certain RA/TID, the session level + * will be managed by the mac80211. + */ +int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid); + +/** + * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate. + * @vif: &struct ieee80211_vif pointer from the add_interface callback + * @ra: receiver address of the BA session recipient. + * @tid: the desired TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session tear down. It + * can be called from any context. + */ +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, + u16 tid); + +/** + * ieee80211_find_sta - find a station + * + * @vif: virtual interface to look for station on + * @addr: station's address + * + * This function must be called under RCU lock and the + * resulting pointer is only valid under RCU lock as well. + */ +struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, + const u8 *addr); + +/** + * ieee80211_find_sta_by_ifaddr - find a station on hardware + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @addr: remote station's address + * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'. + * + * This function must be called under RCU lock and the + * resulting pointer is only valid under RCU lock as well. + * + * NOTE: You may pass NULL for localaddr, but then you will just get + * the first STA that matches the remote address 'addr'. + * We can have multiple STA associated with multiple + * logical stations (e.g. consider a station connecting to another + * BSSID on the same AP hardware without disconnecting first). + * In this case, the result of this method with localaddr NULL + * is not reliable. + * + * DO NOT USE THIS FUNCTION with localaddr NULL if at all possible. + */ +struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, + const u8 *addr, + const u8 *localaddr); + +/** + * ieee80211_sta_block_awake - block station from waking up + * @hw: the hardware + * @pubsta: the station + * @block: whether to block or unblock + * + * Some devices require that all frames that are on the queues + * for a specific station that went to sleep are flushed before + * a poll response or frames after the station woke up can be + * delivered to that it. Note that such frames must be rejected + * by the driver as filtered, with the appropriate status flag. + * + * This function allows implementing this mode in a race-free + * manner. + * + * To do this, a driver must keep track of the number of frames + * still enqueued for a specific station. If this number is not + * zero when the station goes to sleep, the driver must call + * this function to force mac80211 to consider the station to + * be asleep regardless of the station's actual state. Once the + * number of outstanding frames reaches zero, the driver must + * call this function again to unblock the station. That will + * cause mac80211 to be able to send ps-poll responses, and if + * the station queried in the meantime then frames will also + * be sent out as a result of this. Additionally, the driver + * will be notified that the station woke up some time after + * it is unblocked, regardless of whether the station actually + * woke up while blocked or not. + */ +void ieee80211_sta_block_awake(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, bool block); + +/** + * ieee80211_sta_eosp - notify mac80211 about end of SP + * @pubsta: the station + * + * When a device transmits frames in a way that it can't tell + * mac80211 in the TX status about the EOSP, it must clear the + * %IEEE80211_TX_STATUS_EOSP bit and call this function instead. + * This applies for PS-Poll as well as uAPSD. + * + * Note that there is no non-_irqsafe version right now as + * it wasn't needed, but just like _tx_status() and _rx() + * must not be mixed in irqsafe/non-irqsafe versions, this + * function must not be mixed with those either. Use the + * all irqsafe, or all non-irqsafe, don't mix! If you need + * the non-irqsafe version of this, you need to add it. + */ +void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta); + +/** + * ieee80211_iter_keys - iterate keys programmed into the device + * @hw: pointer obtained from ieee80211_alloc_hw() + * @vif: virtual interface to iterate, may be %NULL for all + * @iter: iterator function that will be called for each key + * @iter_data: custom data to pass to the iterator function + * + * This function can be used to iterate all the keys known to + * mac80211, even those that weren't previously programmed into + * the device. This is intended for use in WoWLAN if the device + * needs reprogramming of the keys during suspend. Note that due + * to locking reasons, it is also only safe to call this at few + * spots since it must hold the RTNL and be able to sleep. + * + * The order in which the keys are iterated matches the order + * in which they were originally installed and handed to the + * set_key callback. + */ +void ieee80211_iter_keys(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + void (*iter)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + void *data), + void *iter_data); + +/** + * ieee80211_ap_probereq_get - retrieve a Probe Request template + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Creates a Probe Request template which can, for example, be uploaded to + * hardware. The template is filled with bssid, ssid and supported rate + * information. This function must only be called from within the + * .bss_info_changed callback function and only in managed mode. The function + * is only useful when the interface is associated, otherwise it will return + * NULL. + */ +struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + +/** + * ieee80211_beacon_loss - inform hardware does not receive beacons + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and + * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the + * hardware is not receiving beacons with this function. + */ +void ieee80211_beacon_loss(struct ieee80211_vif *vif); + +/** + * ieee80211_connection_loss - inform hardware has lost connection to the AP + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and + * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver + * needs to inform if the connection to the AP has been lost. + * + * This function will cause immediate change to disassociated state, + * without connection recovery attempts. + */ +void ieee80211_connection_loss(struct ieee80211_vif *vif); + +/** + * ieee80211_resume_disconnect - disconnect from AP after resume + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Instructs mac80211 to disconnect from the AP after resume. + * Drivers can use this after WoWLAN if they know that the + * connection cannot be kept up, for example because keys were + * used while the device was asleep but the replay counters or + * similar cannot be retrieved from the device during resume. + * + * Note that due to implementation issues, if the driver uses + * the reconfiguration functionality during resume the interface + * will still be added as associated first during resume and then + * disconnect normally later. + * + * This function can only be called from the resume callback and + * the driver must not be holding any of its own locks while it + * calls this function, or at least not any locks it needs in the + * key configuration paths (if it supports HW crypto). + */ +void ieee80211_resume_disconnect(struct ieee80211_vif *vif); + +/** + * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Some hardware require full power save to manage simultaneous BT traffic + * on the WLAN frequency. Full PSM is required periodically, whenever there are + * burst of BT traffic. The hardware gets information of BT traffic via + * hardware co-existence lines, and consequentially requests mac80211 to + * (temporarily) enter full psm. + * This function will only temporarily disable dynamic PS, not enable PSM if + * it was not already enabled. + * The driver must make sure to re-enable dynamic PS using + * ieee80211_enable_dyn_ps() if the driver has disabled it. + * + */ +void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif); + +/** + * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * This function restores dynamic PS after being temporarily disabled via + * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must + * be coupled with an eventual call to this function. + * + */ +void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); + +/** + * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring + * rssi threshold triggered + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @rssi_event: the RSSI trigger event type + * @gfp: context flags + * + * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality + * monitoring is configured with an rssi threshold, the driver will inform + * whenever the rssi level reaches the threshold. + */ +void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, + enum nl80211_cqm_rssi_threshold_event rssi_event, + gfp_t gfp); + +/** + * ieee80211_get_operstate - get the operstate of the vif + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * The driver might need to know the operstate of the net_device + * (specifically, whether the link is IF_OPER_UP after resume) + */ +unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif); + +/** + * ieee80211_chswitch_done - Complete channel switch process + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @success: make the channel switch successful or not + * + * Complete the channel switch post-process: set the new operational channel + * and wake up the suspended queues. + */ +void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success); + +/** + * ieee80211_request_smps - request SM PS transition + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @smps_mode: new SM PS mode + * + * This allows the driver to request an SM PS transition in managed + * mode. This is useful when the driver has more information than + * the stack about possible interference, for example by bluetooth. + */ +void ieee80211_request_smps(struct ieee80211_vif *vif, + enum ieee80211_smps_mode smps_mode); + +/** + * ieee80211_key_removed - disable hw acceleration for key + * @key_conf: The key hw acceleration should be disabled for + * + * This allows drivers to indicate that the given key has been + * removed from hardware acceleration, due to a new key that + * was added. Don't use this if the key can continue to be used + * for TX, if the key restriction is on RX only it is permitted + * to keep the key for TX only and not call this function. + * + * Due to locking constraints, it may only be called during + * @set_key. This function must be allowed to sleep, and the + * key it tries to disable may still be used until it returns. + */ +void ieee80211_key_removed(struct ieee80211_key_conf *key_conf); + +/** + * ieee80211_ready_on_channel - notification of remain-on-channel start + * @hw: pointer as obtained from ieee80211_alloc_hw() + */ +void ieee80211_ready_on_channel(struct ieee80211_hw *hw); + +/** + * ieee80211_remain_on_channel_expired - remain_on_channel duration expired + * @hw: pointer as obtained from ieee80211_alloc_hw() + */ +void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw); + +/** + * ieee80211_stop_rx_ba_session - callback to stop existing BA sessions + * + * in order not to harm the system performance and user experience, the device + * may request not to allow any rx ba session and tear down existing rx ba + * sessions based on system constraints such as periodic BT activity that needs + * to limit wlan activity (eg.sco or a2dp)." + * in such cases, the intention is to limit the duration of the rx ppdu and + * therefore prevent the peer device to use a-mpdu aggregation. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @ba_rx_bitmap: Bit map of open rx ba per tid + * @addr: & to bssid mac address + */ +void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap, + const u8 *addr); + +/** + * ieee80211_send_bar - send a BlockAckReq frame + * + * can be used to flush pending frames from the peer's aggregation reorder + * buffer. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @ra: the peer's destination address + * @tid: the TID of the aggregation session + * @ssn: the new starting sequence number for the receiver + */ +void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); + +/* Rate control API */ + +/** + * enum rate_control_changed - flags to indicate which parameter changed + * + * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have + * changed, rate control algorithm can update its internal state if needed. + */ +enum rate_control_changed { + IEEE80211_RC_HT_CHANGED = BIT(0) +}; + +/** + * struct ieee80211_tx_rate_control - rate control information for/from RC algo + * + * @hw: The hardware the algorithm is invoked for. + * @sband: The band this frame is being transmitted on. + * @bss_conf: the current BSS configuration + * @reported_rate: The rate control algorithm can fill this in to indicate + * which rate should be reported to userspace as the current rate and + * used for rate calculations in the mesh network. + * @rts: whether RTS will be used for this frame because it is longer than the + * RTS threshold + * @short_preamble: whether mac80211 will request short-preamble transmission + * if the selected rate supports it + * @max_rate_idx: user-requested maximum rate (not MCS for now) + * (deprecated; this will be removed once drivers get updated to use + * rate_idx_mask) + * @rate_idx_mask: user-requested rate mask (not MCS for now) + * @skb: the skb that will be transmitted, the control information in it needs + * to be filled in + * @bss: whether this frame is sent out in AP or IBSS mode + */ +struct ieee80211_tx_rate_control { + struct ieee80211_hw *hw; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_conf *bss_conf; + struct sk_buff *skb; + struct ieee80211_tx_rate reported_rate; + bool rts, short_preamble; + u8 max_rate_idx; + u32 rate_idx_mask; + bool bss; +}; + +struct rate_control_ops { + struct module *module; + const char *name; + void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir); + void (*free)(void *priv); + + void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp); + void (*rate_init)(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta); + void (*rate_update)(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, + void *priv_sta, u32 changed, + enum nl80211_channel_type oper_chan_type); + void (*free_sta)(void *priv, struct ieee80211_sta *sta, + void *priv_sta); + + void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct sk_buff *skb); + void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc); + + void (*add_sta_debugfs)(void *priv, void *priv_sta, + struct dentry *dir); + void (*remove_sta_debugfs)(void *priv, void *priv_sta); +}; + +static inline int rate_supported(struct ieee80211_sta *sta, + enum ieee80211_band band, + int index) +{ + return (sta == NULL || sta->supp_rates[band] & BIT(index)); +} + +/** + * rate_control_send_low - helper for drivers for management/no-ack frames + * + * Rate control algorithms that agree to use the lowest rate to + * send management frames and NO_ACK data with the respective hw + * retries should use this in the beginning of their mac80211 get_rate + * callback. If true is returned the rate control can simply return. + * If false is returned we guarantee that sta and sta and priv_sta is + * not null. + * + * Rate control algorithms wishing to do more intelligent selection of + * rate for multicast/broadcast frames may choose to not use this. + * + * @sta: &struct ieee80211_sta pointer to the target destination. Note + * that this may be null. + * @priv_sta: private rate control structure. This may be null. + * @txrc: rate control information we sholud populate for mac80211. + */ +bool rate_control_send_low(struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc); + + +static inline s8 +rate_lowest_index(struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + int i; + + for (i = 0; i < sband->n_bitrates; i++) + if (rate_supported(sta, sband->band, i)) + return i; + + /* warn when we cannot find a rate. */ + WARN_ON_ONCE(1); + + /* and return 0 (the lowest index) */ + return 0; +} + +static inline +bool rate_usable_index_exists(struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + unsigned int i; + + for (i = 0; i < sband->n_bitrates; i++) + if (rate_supported(sta, sband->band, i)) + return true; + return false; +} + +int ieee80211_rate_control_register(struct rate_control_ops *ops); +void ieee80211_rate_control_unregister(struct rate_control_ops *ops); + +static inline bool +conf_is_ht20(struct ieee80211_conf *conf) +{ + return conf->channel_type == NL80211_CHAN_HT20; +} + +static inline bool +conf_is_ht40_minus(struct ieee80211_conf *conf) +{ + return conf->channel_type == NL80211_CHAN_HT40MINUS; +} + +static inline bool +conf_is_ht40_plus(struct ieee80211_conf *conf) +{ + return conf->channel_type == NL80211_CHAN_HT40PLUS; +} + +static inline bool +conf_is_ht40(struct ieee80211_conf *conf) +{ + return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); +} + +static inline bool +conf_is_ht(struct ieee80211_conf *conf) +{ + return conf->channel_type != NL80211_CHAN_NO_HT; +} + +static inline enum nl80211_iftype +ieee80211_iftype_p2p(enum nl80211_iftype type, bool p2p) +{ + if (p2p) { + switch (type) { + case NL80211_IFTYPE_STATION: + return NL80211_IFTYPE_P2P_CLIENT; + case NL80211_IFTYPE_AP: + return NL80211_IFTYPE_P2P_GO; + default: + break; + } + } + return type; +} + +static inline enum nl80211_iftype +ieee80211_vif_type_p2p(struct ieee80211_vif *vif) +{ + return ieee80211_iftype_p2p(vif->type, vif->p2p); +} + +void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, + int rssi_min_thold, + int rssi_max_thold); + +void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); + +int ieee80211_add_srates_ie(struct ieee80211_vif *vif, struct sk_buff *skb); + +int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif, + struct sk_buff *skb); +#endif /* MAC80211_H */ diff --git a/include/compat/net/net_namespace.h b/include/compat/net/net_namespace.h new file mode 100755 index 0000000..0f74944 --- /dev/null +++ b/include/compat/net/net_namespace.h @@ -0,0 +1,10 @@ +#ifndef _COMPAT_NET_NET_NAMESPACE_H +#define _COMPAT_NET_NET_NAMESPACE_H 1 + +#include + +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,23)) +#include_next +#endif /* (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,23)) */ + +#endif /* _COMPAT_NET_NET_NAMESPACE_H */ diff --git a/include/compat/net/regulatory.h b/include/compat/net/regulatory.h new file mode 100755 index 0000000..ebe5fe7 --- /dev/null +++ b/include/compat/net/regulatory.h @@ -0,0 +1,116 @@ +#ifndef __NET_REGULATORY_H +#define __NET_REGULATORY_H +/* + * regulatory support structures + * + * Copyright 2008-2009 Luis R. Rodriguez + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + +/** + * enum environment_cap - Environment parsed from country IE + * @ENVIRON_ANY: indicates country IE applies to both indoor and + * outdoor operation. + * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation + * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation + */ +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + +/** + * struct regulatory_request - used to keep track of regulatory requests + * + * @wiphy_idx: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * 97 - regulatory domain has not yet been configured + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + * @processed: indicates whether or not this requests has already been + * processed. When the last request is processed it means that the + * currently regulatory domain set on cfg80211 is updated from + * CRDA and can be used by other regulatory requests. When a + * the last request is not yet processed we must yield until it + * is processed before processing any new requests. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter + * @list: used to insert into the reg_requests_list linked list + */ +struct regulatory_request { + int wiphy_idx; + enum nl80211_reg_initiator initiator; + char alpha2[2]; + bool intersect; + bool processed; + enum environment_cap country_ie_env; + struct list_head list; +}; + +struct ieee80211_freq_range { + u32 start_freq_khz; + u32 end_freq_khz; + u32 max_bandwidth_khz; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) ((freq) * 1000) +#define KHZ_TO_MHZ(freq) ((freq) / 1000) +#define DBI_TO_MBI(gain) ((gain) * 100) +#define MBI_TO_DBI(gain) ((gain) / 100) +#define DBM_TO_MBM(gain) ((gain) * 100) +#define MBM_TO_DBM(gain) ((gain) / 100) + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ +{ \ + .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ + .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ + .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ + .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\ + .power_rule.max_eirp = DBM_TO_MBM(eirp), \ + .flags = reg_flags, \ +} + +#endif -- cgit v1.1