From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat, 16 Apr 2005 15:20:36 -0700
Subject: Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
---
 include/linux/scx200_gpio.h | 96 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 include/linux/scx200_gpio.h

(limited to 'include/linux/scx200_gpio.h')

diff --git a/include/linux/scx200_gpio.h b/include/linux/scx200_gpio.h
new file mode 100644
index 0000000..30cdd64
--- /dev/null
+++ b/include/linux/scx200_gpio.h
@@ -0,0 +1,96 @@
+#include <linux/spinlock.h>
+
+u32 scx200_gpio_configure(int index, u32 set, u32 clear);
+
+extern unsigned scx200_gpio_base;
+extern long scx200_gpio_shadow[2];
+
+#define scx200_gpio_present() (scx200_gpio_base!=0)
+
+/* Definitions to make sure I do the same thing in all functions */
+#define __SCx200_GPIO_BANK unsigned bank = index>>5
+#define __SCx200_GPIO_IOADDR unsigned short ioaddr = scx200_gpio_base+0x10*bank
+#define __SCx200_GPIO_SHADOW long *shadow = scx200_gpio_shadow+bank
+#define __SCx200_GPIO_INDEX index &= 31
+
+#define __SCx200_GPIO_OUT __asm__ __volatile__("outsl":"=mS" (shadow):"d" (ioaddr), "0" (shadow))
+
+/* returns the value of the GPIO pin */
+
+static inline int scx200_gpio_get(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR + 0x04;
+	__SCx200_GPIO_INDEX;
+		
+	return (inl(ioaddr) & (1<<index)) ? 1 : 0;
+}
+
+/* return the value driven on the GPIO signal (the value that will be
+   driven if the GPIO is configured as an output, it might not be the
+   state of the GPIO right now if the GPIO is configured as an input) */
+
+static inline int scx200_gpio_current(int index) {
+        __SCx200_GPIO_BANK;
+	__SCx200_GPIO_INDEX;
+		
+	return (scx200_gpio_shadow[bank] & (1<<index)) ? 1 : 0;
+}
+
+/* drive the GPIO signal high */
+
+static inline void scx200_gpio_set_high(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	set_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal low */
+
+static inline void scx200_gpio_set_low(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	clear_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal to state */
+
+static inline void scx200_gpio_set(int index, int state) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	if (state)
+		set_bit(index, shadow);
+	else
+		clear_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* toggle the GPIO signal */
+static inline void scx200_gpio_change(int index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	change_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+#undef __SCx200_GPIO_BANK
+#undef __SCx200_GPIO_IOADDR
+#undef __SCx200_GPIO_SHADOW
+#undef __SCx200_GPIO_INDEX
+#undef __SCx200_GPIO_OUT
+
+/*
+    Local variables:
+        compile-command: "make -C ../.. bzImage modules"
+        c-basic-offset: 8
+    End:
+*/
-- 
cgit v1.1