# arch/arm/mach-exynos/Kconfig # # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. # http://www.samsung.com/ # # Licensed under GPLv2 # Configuration options for the EXYNOS if ARCH_EXYNOS choice prompt "EXYNOS system type" default ARCH_EXYNOS4 config ARCH_EXYNOS4 bool "Samsung Exynos4" select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 select ARM_ERRATA_764369 help Samsung EXYNOS4 series based systems config ARCH_EXYNOS5 bool "Samsung Exynos5" select ARM_ERRATA_761171 select ARM_ERRATA_762974 select ARM_ERRATA_763722 select HAVE_EXYNOS5_HSI2C if I2C help Samsung EXYNOS5 series based systems endchoice config CPU_EXYNOS4210 bool select S3C_PL330_DMA select PL310_ERRATA_727915 select ARM_ERRATA_753970 help Enable EXYNOS4210 CPU support config CPU_EXYNOS4212 bool select S3C_PL330_DMA help Enable EXYNOS4212 CPU support config CPU_EXYNOS4412 bool select S3C_PL330_DMA select ARM_ERRATA_761320 help Enable EXYNOS4412 CPU support config CPU_EXYNOS5210 bool select S3C_PL330_DMA help Enable EXYNOS5210 CPU support config S5PV310_HI_ARMCLK_THAN_1_2GHZ bool "Enable the higher ARM clock than 1.2GHz" default n help S5PV310 has different max arm clock. (i.e. 1.0GHz, 1.2GHz and 1.4GHz etc.) If you are using the chip to work at the high clock than 1.2GHz, activate this option. choice prompt "EXYNOS5210 core type" depends on CPU_EXYNOS5210 default CPU_A15 config CPU_EXYNOS5210_A15 bool "A15 core" help A15 dual core CPU support config CPU_EXYNOS5210_A5_IOP bool "A5 IOP core" help A5 single core CPU support endchoice config CPU_EXYNOS5250 bool select S3C_PL330_DMA help Enable EXYNOS5250 CPU support config EXYNOS_CONTENT_PATH_PROTECTION bool "Exynos Content Path Protection" depends on (ARM_TRUSTZONE && (ARCH_EXYNOS4 || ARCH_EXYNOS5)) default n help Enable content path protection of EXYNOS. config EXYNOS4_PM bool "Exynos4 Power Management" depends on (PM && ARCH_EXYNOS4) default y help Enable suspend and resume for Exynos4 series. config EXYNOS5_PM bool "Exynos5 Power Management" depends on (PM && ARCH_EXYNOS5) default y help Enable suspend and resume for Exynos5 series. config EXYNOS4_CPUIDLE bool "Exynos4 CPUIDLE Feature" depends on (CPU_IDLE && ARCH_EXYNOS4) default y help Enable CPUIDLE for Exynos4 series. config EXYNOS4_LOWPWR_IDLE bool "Exynos4 Lowpower IDLE Feature" depends on EXYNOS4_CPUIDLE default y help Enable Low power IDLE for Exynos4 series. config EXYNOS5_CPUIDLE bool "Exynos5 CPUIDLE Feature" depends on (CPU_IDLE && ARCH_EXYNOS5) default y help Enable CPUIDLE for Exynos5 series. config EXYNOS5_LOWPWR_IDLE bool "Exynos5 Lowpower IDLE Feature" depends on EXYNOS5_CPUIDLE default y help Enable Low power IDLE for Exynos5 series. config EXYNOS_MCT bool default y help Use MCT (Multi Core Timer) as kernel timers config EXYNOS5_DEV_AHCI bool help Compile in platform device definitions for AHCI SATA3.0 config EXYNOS4_DEV_AHCI bool help Compile in platform device definitions for AHCI config EXYNOS4_SETUP_FIMD0 bool help Common setup code for FIMD0. config EXYNOS4_SETUP_FIMD bool help Common setup code for FIMD. config EXYNOS4_SETUP_DP bool help Common setup code for DP. config EXYNOS_DEV_SYSMMU bool help Common setup code for SYSTEM MMU in EXYNOS config EXYNOS_DEV_PD bool select SAMSUNG_PD help Compile in platform device definitions for Power Domain config EXYNOS4_DEV_DWMCI bool help Compile in platform device definitions for DWMCI config EXYNOS4_DEV_FIMC_LITE bool help Compile in platform device definitions for FIMC_LITE config EXYNOS4_DEV_FIMC_IS bool depends on (VIDEO_EXYNOS_FIMC_IS || VIDEO_EXYNOS5_FIMC_IS) default y help Compile in platform device definition for FIMC-IS config EXYNOS4_SETUP_HDMI bool help Common setup code for hdmi config EXYNOS4_SETUP_I2C1 bool help Common setup code for i2c bus 1. config EXYNOS4_SETUP_I2C2 bool help Common setup code for i2c bus 2. config EXYNOS4_SETUP_I2C3 bool help Common setup code for i2c bus 3. config EXYNOS4_SETUP_I2C4 bool help Common setup code for i2c bus 4. config EXYNOS4_SETUP_I2C5 bool help Common setup code for i2c bus 5. config EXYNOS4_SETUP_I2C6 bool help Common setup code for i2c bus 6. config EXYNOS4_SETUP_I2C7 bool help Common setup code for i2c bus 7. config EXYNOS5_SETUP_HSI2C0 bool help Common setup code for hs-i2c bus 0. config EXYNOS5_SETUP_HSI2C1 bool help Common setup code for hs-i2c bus 1. config EXYNOS5_SETUP_HSI2C2 bool help Common setup code for hs-i2c bus 2. config EXYNOS5_DEV_HSI2C0 bool help Compile in platform device definitions for HS-I2C channel 0 config EXYNOS5_DEV_HSI2C1 bool help Compile in platform device definitions for HS-I2C channel 1 config EXYNOS5_DEV_HSI2C2 bool help Compile in platform device definitions for HS-I2C channel 2 config EXYNOS5_DEV_HSI2C3 bool help Compile in platform device definitions for HS-I2C channel 3 config EXYNOS5_SETUP_HSI2C3 bool help Common setup code for hs-i2c bus 3. config EXYNOS4_SETUP_KEYPAD bool help Common setup code for keypad. config EXYNOS4_SETUP_MFC bool help Common setup code for MFC. config EXYNOS4_SETUP_SDHCI bool select EXYNOS4_SETUP_SDHCI_GPIO help Internal helper functions for EXYNOS4 based SDHCI systems. config EXYNOS4_SETUP_SDHCI_GPIO bool help Common setup code for SDHCI gpio. config EXYNOS4_SETUP_MSHCI bool select EXYNOS4_SETUP_MSHCI_GPIO help Internal helper functions for EXYNOS4 based MSHCI systems. config EXYNOS4_SETUP_MSHCI_GPIO bool help Common setup code for MSHCI gpio. config EXYNOS4_SETUP_FIMC bool depends on VIDEO_SAMSUNG_S5P_FIMC default y help Common setup code for the camera interfaces. config EXYNOS4_SETUP_FIMC0 bool depends on VIDEO_FIMC default y help Common setup code for the camera interfaces. config EXYNOS4_SETUP_FIMC1 bool depends on VIDEO_FIMC default y help Common setup code for the camera interfaces. config EXYNOS4_SETUP_FIMC2 bool depends on VIDEO_FIMC default y help Common setup code for the camera interfaces. config EXYNOS4_SETUP_FIMC3 bool depends on VIDEO_FIMC default y help Common setup code for the camera interfaces. config EXYNOS4_SETUP_FIMC_IS bool depends on (VIDEO_EXYNOS_FIMC_IS || VIDEO_EXYNOS5_FIMC_IS) default y help Common setup code for the FIMC-IS config EXYNOS4_SETUP_USB_PHY bool help Common setup code for USB PHY controller config EXYNOS4_SETUP_CSIS bool depends on VIDEO_FIMC_MIPI default y help Common setup code for MIPI-CSIS config EXYNOS4_SETUP_FB_S5P bool default n help Setup code for EXYNOS4 FIMD config EXYNOS4_SETUP_TVOUT bool "enabel EXYNOS4_SETUP_TVOUT" default y help Common setup code for TVOUT config EXYNOS4_SETUP_THERMAL bool "Use thermal management for exynos4" depends on CPU_FREQ help Common setup code for Exynos4 TMU config EXYNOS_SETUP_THERMAL bool "Use thermal management" depends on CPU_FREQ help Common setup code for TMU config TMU_DEBUG bool "Thermal management Debug" depends on EXYNOS_SETUP_THERMAL help TMU debugging message on config EXYNOS4_SETUP_MIPI_DSI bool depends on FB_S5P_MIPI_DSIM default y help Common setup code for MIPI_DSIM. config EXYNOS4_SETUP_MIPI_DSIM bool depends on FB_MIPI_DSIM default y help Common setup code for MIPI_DSIM to support mainline style fimd. config EXYNOS4_SETUP_JPEG bool depends on VIDEO_JPEG_V2X default y help Common setup code for JPEG config EXYNOS5_DEV_GSC bool depends on VIDEO_EXYNOS_GSCALER default y help Compile in platform device definitions for GSC config EXYNOS5_DEV_FIMC_IS bool depends on VIDEO_EXYNOS5_FIMC_IS default y help Compile in platform device definition for FIMC-IS config EXYNOS5_SETUP_GSC bool depends on VIDEO_EXYNOS_GSCALER default y help Common setup code for GSC config EXYNOS4_ENABLE_CLOCK_DOWN bool "ARM core clock down feature enable" depends on EXYNOS4_CPUIDLE default n help ARM core clock down in idle time. config EXYNOS5_ENABLE_CLOCK_DOWN bool "ARM core clock down feature enable" depends on EXYNOS5_CPUIDLE default n help ARM core clock down in idle time. config EXYNOS4_CPUFREQ def_bool y depends on CPU_FREQ && ARCH_EXYNOS4 help Exynos4 cpufreq support config EXYNOS5_CPUFREQ def_bool y depends on CPU_FREQ && ARCH_EXYNOS5 help Exynos5 cpufreq support choice prompt "Max CPU frequency" depends on EXYNOS4_CPUFREQ default EXYNOS4X12_1400MHZ_SUPPORT if (CPU_EXYNOS4212 || CPU_EXYNOS4412) default EXYNOS4210_1400MHZ_SUPPORT if CPU_EXYNOS4210 config EXYNOS4210_1200MHZ_SUPPORT bool "Max 1200MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && CPU_EXYNOS4210 help Max 1.2Ghz support config EXYNOS4210_1400MHZ_SUPPORT bool "Max 1400MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && CPU_EXYNOS4210 help Max 1.4Ghz support config EXYNOS4X12_1500MHZ_SUPPORT bool "Max 1500MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && (CPU_EXYNOS4212 || CPU_EXYNOS4412) help Max 1.5Ghz support config EXYNOS4X12_1400MHZ_SUPPORT bool "Max 1400MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && (CPU_EXYNOS4212 || CPU_EXYNOS4412) help Max 1.4Ghz support config EXYNOS4X12_1200MHZ_SUPPORT bool "Max 1200MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && (CPU_EXYNOS4212 || CPU_EXYNOS4412) help Max 1.2Ghz support config EXYNOS4X12_1000MHZ_SUPPORT bool "Max 1000MHz CPUFREQ LEVEL" depends on EXYNOS4_CPUFREQ && (CPU_EXYNOS4212 || CPU_EXYNOS4412) help Max 1.0Ghz support endchoice config MIDAS_COMMON bool help Support common devices of MIDAS boards menu "Support dynamic CPU Hotplug" depends on HOTPLUG_CPU && SMP config EXYNOS_PM_HOTPLUG bool "EXYNOS Dynamic Hotplug" help Dynamic CPU HOTLUG for EXYNOS series choice prompt "Dynamic CPU HOTPLUG Policy" depends on EXYNOS_PM_HOTPLUG default DVFS_NR_RUNNING_POLICY if (CPU_EXYNOS4212 || CPU_EXYNOS4412 || CPU_EXYNOS5250) config STAND_ALONE_POLICY bool "Stand alone policy CPU hotplug" depends on EXYNOS_PM_HOTPLUG help PM hotplug policy. This is for exynos4210 Enable to use pm hotplug, then it uses stand-hotplug.c file. Avg-load is calculated with both cpu frequency aspect and run queue status. config LEGACY_HOTPLUG_POLICY bool "Legacy policy CPU hotplug" depends on EXYNOS_PM_HOTPLUG help PM hotplug policy. This is for exynos4210 Enable to use pm hotplug, then it uses pm-hotplug.c file. Avg-load is calculated with only cpu utilization of cpu frequency at that time. config WITH_DVFS_POLICY depends on EXYNOS4_CPUFREQ bool "Intergrated DVFS CPU hotplug" config DVFS_NR_RUNNING_POLICY depends on (EXYNOS4_CPUFREQ || EXYNOS5_CPUFREQ) bool "DVFS-nr_running CPU hotplug" config NR_RUNNING_POLICY bool "nr_running CPU hotplug" endchoice endmenu menu "Busfreq Model" depends on EXYNOS4_CPUFREQ || EXYNOS5_CPUFREQ config BUSFREQ bool "Busfreq with PPC/PPMU" depends on EXYNOS4_CPUFREQ config BUSFREQ_QOS bool "QoS with Busfreq" depends on BUSFREQ default n config BUSFREQ_OPP bool "Busfreq with OPP" depends on EXYNOS4_CPUFREQ || EXYNOS5_CPUFREQ config DISPFREQ_OPP bool "Dispfreq with OPP" depends on EXYNOS4_CPUFREQ || EXYNOS5_CPUFREQ config DEVFREQ_BUS bool "Busfreq support with Devfreq framework & Simple-Ondemand" depends on EXYNOS4_CPUFREQ select PM_DEVFREQ select ARM_EXYNOS4_BUS_DEVFREQ choice prompt "QoS LEVEL By Resolution" depends on BUSFREQ_QOS || BUSFREQ_OPP default BUSFREQ_QOS_LEVEL_NONE config BUSFREQ_QOS_NONE bool "QoS Setting is not required" config BUSFREQ_QOS_1024X600 bool "QoS for 1024x600 (like P2)" config BUSFREQ_QOS_1280X720 bool "QoS for 1280x720 (like M0/T0)" config BUSFREQ_QOS_1280X800 bool "QoS for 1280x800 or 800x1280 (like Q1/P8)" endchoice endmenu config BUSFREQ_DEBUG bool "BUSFREQ sysfs support" default n config GPIO_MIDAS_01_BD bool "GPIO configuration for Midas 01 BD" depends on MACH_SLP_MIDAS config GPIO_MIDAS_02_BD bool "GPIO configuration for Midas 02 BD" depends on MACH_SLP_MIDAS config BUSFREQ_L2_160M bool "Busfreq L2 level use 160MHz" default n help Busfreq uses 160MHz for L2, not 133MHz. Optimize busfreq dvfs level transition for LCD high resolution. This enable 160MHz of L2 level. Q1 has high LCD resolution, so uses busfreq dvfs L2 as 160MHz. config SEC_THERMISTOR bool "Use external thermistor with ADC" depends on SAMSUNG_DEV_ADC default n help Use thermistor driver for U1 & U1 Premium. U1 has two thermistors. this device driver use one of those to check system temperature. config EXYNOS_SYSREG_PM bool "PM Support for System Registers" depends on CPU_EXYNOS4210 || CPU_EXYNOS4412 || CPU_EXYNOS4212 default n help Use System Register save/restore for suspend-to-RAM Some boards have this code hard coded in device drivers(FB); however, this is better supported at SoC support code. Currently, SLP kernel depends on this. config ANDROID_WIP bool "work in progress hacks for android" default n help This enables 'work in progress' hacks for android issues. Please remove it later. config COMPACTION_RETRY bool "retry compaction once more after direct reclaim fails" default n depends on COMPACTION help This enables compaction retry in android. If fails to get pages even with direct reclaim, we give one more try to allocate pages with forced compaction. This might avoid oom-killer invocation. with many free pages being already there. config COMPACTION_RETRY_DEBUG bool "debug information for COMPACTION_RETRY" default n depends on COMPACTION_RETRY help This enables debug feature for compaction retry. This shows us the buddy information before and after compation retrial. This should be turned off later. # machine support menu "EXYNOS4 Machines" depends on ARCH_EXYNOS4 config MACH_SMDKC210 bool "SMDKC210" select CPU_EXYNOS4210 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_HWMON if S3C_ADC select S5P_GPIO_INT select S5P_DEV_FIMD0 select S5P_DEV_FIMD_S5P select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_ROTATOR select S5P_DEV_USBGADGET select S5P_DEV_JPEG select S5P_DEV_THERMAL select S5P_DEV_USB_EHCI select S5P_SYSTEM_MMU select EXYNOS_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_MFC select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS select SAMSUNG_DEV_TS1 select SAMSUNG_DEV_PWM select SAMSUNG_DEV_BACKLIGHT help Machine support for Samsung SMDKC210 config MACH_SMDKV310 bool "SMDKV310" select CPU_EXYNOS4210 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_HWMON if S3C_ADC select S5P_GPIO_INT select S5P_DEV_FIMD0 select S5P_DEV_FIMD_S5P select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_ROTATOR select S5P_DEV_USBGADGET select S5P_DEV_JPEG select S5P_DEV_THERMAL select S5P_DEV_USB_EHCI select S5P_SYSTEM_MMU select EXYNOS_DEV_PD select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_MFC select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_PWM select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS select SAMSUNG_DEV_TS1 help Machine support for Samsung SMDKV310 config MACH_ARMLEX4210 bool "ARMLEX4210" select CPU_EXYNOS4210 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5P_SYSTEM_MMU select EXYNOS4_DEV_AHCI select EXYNOS4_SETUP_SDHCI help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C5 select S5P_DEV_ONENAND select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI help Machine support for Samsung Mobile Universal S5PC210 Reference Board. config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C4 select S3C_DEV_I2C5 select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. config MACH_U1_NA_SPR bool "NA" select S3C_DEV_I2C17_EMUL select S3C_DEV_I2C4 select EXYNOS4_SETUP_I2C4 config MACH_U1_NA_USCC bool "NA" select S3C_DEV_I2C17_EMUL select S3C_DEV_I2C4 select EXYNOS4_SETUP_I2C4 config MACH_U1 bool "U1 board" select CPU_EXYNOS4210 select S5P_GPIO_INT select S5P_DEV_FIMD0 select S5P_DEV_FIMD_S5P select S5P_DEV_TVOUT select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_USB_EHCI select S5P_SYSTEM_MMU select S5P_DEV_USBGADGET select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_I2C6 select S3C_DEV_I2C7 select S3C_DEV_I2C8_EMUL select S3C_DEV_I2C9_EMUL select EXYNOS4_DEV_MSHC select EXYNOS4_MSHC_MPLL_40MHZ select EXYNOS4_MSHC_DDR select EXYNOS4_MSHC_8BIT select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS select SAMSUNG_DEV_TS1 select EXYNOS_DEV_PD select S5P_SYSTEM_MMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_MSHCI select EXYNOS4_SETUP_MFC select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_THERMAL help Machine support for U1 Board choice prompt "U1 board" depends on MACH_U1 || MACH_TRATS default MACH_U1_BD config MACH_U1_BD bool "U1 Board" config MACH_Q1_BD bool "Q1 Board" endchoice config TARGET_LOCALE_NAATT_TEMP bool "Support North America GSM ATT Board" depends on MACH_U1 default n config MACH_PX bool "PX board" select CPU_EXYNOS4210 select S5P_GPIO_INT select S5P_DEV_FIMD0 select S5P_DEV_FIMD_S5P select S5P_DEV_TVOUT select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_USB_EHCI select S5P_SYSTEM_MMU select S5P_DEV_USBGADGET select S5P_DEV_THERMAL select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C4 select S3C_DEV_I2C5 select S3C_DEV_I2C6 select S3C_DEV_I2C7 select S3C_DEV_I2C9_EMUL select EXYNOS4_DEV_MSHC select EXYNOS4_MSHC_MPLL_40MHZ select EXYNOS4_MSHC_DDR select EXYNOS4_MSHC_8BIT select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_TS select SAMSUNG_DEV_TS1 select EXYNOS_DEV_PD select S5P_SYSTEM_MMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_MSHCI select EXYNOS4_SETUP_MFC select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_USB_PHY help Machine support for PX Board choice prompt "PX board" depends on MACH_PX default MACH_P4 config MACH_P4 bool "P4 board" config MACH_P2 bool "P2 board" config MACH_P8 bool "P8 board" config MACH_P8LTE bool "P8 LTE board" select S3C64XX_DEV_SPI0 endchoice choice prompt "LCD panel select" depends on MACH_U1 || MACH_TRATS default PANEL_U1 config PANEL_U1 bool "U1/Q1 default panel" config PANEL_U1_NA_SPR bool "D710 panel" endchoice if MACH_U1 || MACH_C1 || MACH_M3 || MACH_M0 || MACH_P4 || MACH_P2 || MACH_P4NOTE || MACH_T0 || MACH_TRATS || MACH_GRANDE || MACH_GC1 || MACH_BAFFIN || MACH_KONA source "arch/arm/mach-exynos/Kconfig.local" endif config MACH_SMDK4X12 bool "SMDK4X12 board" select CPU_EXYNOS4212 select CPU_EXYNOS4412 select S3C_DEV_WDT select S3C_DEV_RTC select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_I2C3 select S3C_DEV_I2C4 select S3C_DEV_I2C5 select S3C_DEV_I2C7 select S5P_DEV_I2C_HDMIPHY select S5P_GPIO_INT select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_FIMD0 select S5P_DEV_FIMD_S5P select S5P_DEV_USB_EHCI select S5P_DEV_USBGADGET select S5P_DEV_USB_SWITCH select S5P_DEV_THERMAL select S5P_SYSTEM_MMU select EXYNOS_DEV_PD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C2 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_MFC select EXYNOS4_DEV_FIMC_LITE select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_KEYPAD help Machine support for Samsung SMDK4X12 config MACH_MIDAS bool "MIDAS board" select CPU_EXYNOS4212 select CPU_EXYNOS4412 select S3C_DEV_WDT select S3C_DEV_RTC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_ADC select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C6 select S3C_DEV_I2C7 select S5P_GPIO_INT select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_FIMD_S5P select S5P_DEV_USB_EHCI select S5P_DEV_USBGADGET select EXYNOS4_DEV_MSHC select EXYNOS4_SETUP_MSHCI select EXYNOS4_MSHC_MPLL_40MHZ select EXYNOS4_MSHC_DDR select EXYNOS4_MSHC_8BIT select EXYNOS4_SETUP_SDHCI select EXYNOS4_DEV_FIMC_LITE select EXYNOS4_SETUP_FB_S5P select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_MFC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS_DEV_PD select EXYNOS4_SETUP_MFC select MIDAS_COMMON help Machine support for Samsung midas board choice prompt "EXYNOS4212 board" depends on MACH_MIDAS default MACH_M0 config MACH_M0 bool "M0 board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select MIDAS_COMMON_BD config MACH_C1 bool "C1 board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select MIDAS_COMMON_BD config MACH_M3 bool "C2 board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select MIDAS_COMMON_BD config MACH_P4NOTE bool "P4 Note board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select P4NOTE_00_BD config MACH_GC1 bool "Galuxy Camera board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select GC1_00_BD config MACH_T0 bool "T0 board" select EXYNOS4_SETUP_I2C2 select S3C_DEV_I2C2 select S3C_DEV_I2C4 select S3C_DEV_I2C5 config MACH_KONA bool "KONA Note8 board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 config MACH_IRON bool "Iron board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select IRON_BD select EXYNOS4_SETUP_KEYPAD select SAMSUNG_DEV_KEYPAD config MACH_GRANDE bool "Grande board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 select GRANDE_BD select EXYNOS4_SETUP_KEYPAD select SAMSUNG_DEV_KEYPAD config MACH_BAFFIN bool "BAFFIN board" select S3C_DEV_I2C4 select S3C_DEV_I2C5 endchoice config MIDAS_COMMON_BD bool "Midas default common Board" config P4NOTE_00_BD bool "P4 Note PQ common Board" config GC1_00_BD bool "Galaxy Camera common Board" config T0_00_BD bool "T0 Revison 00 board" default n config T0_04_BD bool "T0 Revison 04 board" default n config KONA_00_BD bool "KONA note8 rev00 common Board" default n config KONA_01_BD bool "KONA note8 rev01 common Board" default n config IRON_BD bool "Iron common Board" config GRANDE_BD bool "Grande common Board" config WRITEBACK_ENABLED bool "Samsung Writeback Enable" help This option enables writeback operations. It can support fimd streams data to fimc destinations ram. writeback operations support final blended stream. when enable this options. config EXYNOS_SOUND_PLATFORM_DATA bool "Sound platform data" config JACK_FET bool "Ear Micbias dischage Enable" config JACK_GROUND_DET bool "Ear Ground Detection Enable" config USE_ADC_DET bool "Jack Detection with ADC IC" config SAMSUNG_ANALOG_UART_SWITCH int "SAMSUNG analog switch for UART" default 1 endmenu menu "EXYNOS5 Machines" depends on ARCH_EXYNOS5 config MACH_SMDK5210 bool "SMDK5210 board" select CPU_EXYNOS5210 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S5P_DEV_DP select S5P_DEV_FIMD1 select S5P_DEV_MFC select S5P_DEV_USB_EHCI select EXYNOS_DEV_PD select EXYNOS4_SETUP_DP select EXYNOS4_SETUP_FIMD select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C2 select EXYNOS4_SETUP_MFC select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select S5P_DEV_I2C_HDMIPHY select EXYNOS_DEV_SS_UDC help Machine support for Samsung SMDK5210 config MACH_SMDK5250 bool "SMDK5250 board" select CPU_EXYNOS5250 select S3C_DEV_HWMON if S3C_ADC select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_I2C4 select S3C_DEV_I2C5 select S3C_DEV_I2C7 select S5P_GPIO_INT select S5P_DEV_DP select EXYNOS_DEV_SYSMMU select S5P_DEV_FIMD1 select S5P_DEV_USB_EHCI select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_ROTATOR select S5P_DEV_USBGADGET select S5P_DEV_I2C_HDMIPHY select S5P_DEV_THERMAL select S5P_DEV_USB_SWITCH select EXYNOS_DEV_PD select EXYNOS4_DEV_FIMC_LITE select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C2 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_DP select EXYNOS4_SETUP_FIMD select EXYNOS4_SETUP_USB_PHY select EXYNOS4_SETUP_MFC select EXYNOS5_DEV_AHCI select EXYNOS5_DEV_DWMCI2 select EXYNOS_DEV_SS_UDC select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM help Machine support for Samsung SMDK5250 config MACH_P10 bool "P10 board" select CPU_EXYNOS5250 select S3C_DEV_HWMON if S3C_ADC select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C4 select S3C_DEV_I2C5 select S3C_DEV_I2C7 select S5P_GPIO_INT select S5P_DEV_DP select EXYNOS_DEV_SYSMMU select S5P_DEV_FIMD1 select S5P_DEV_USB_EHCI select S5P_DEV_TV select S5P_DEV_USBGADGET select S5P_DEV_MFC select S5P_DEV_FIMG2D select S5P_DEV_ROTATOR select S5P_DEV_I2C_HDMIPHY select EXYNOS_DEV_PD select EXYNOS4_DEV_FIMC_LITE select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C4 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_DP select EXYNOS4_SETUP_SDHCI select EXYNOS4_DEV_DWMCI select EXYNOS4_SETUP_FIMD select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS4_SETUP_MFC select EXYNOS_DEV_SS_UDC select SAMSUNG_DEV_ADC select EXYNOS4_SETUP_THERMAL help Machine support for Samsung P10 board choice prompt "P10 board" depends on MACH_P10 default MACH_P10_00_BD config MACH_P10_00_BD bool "P10 Rev 0.0 board" config MACH_P10_LTE_00_BD bool "P10 LTE Rev 0.0 board" config MACH_P10_WIFI_00_BD bool "P10 WIFI Rev 0.0 board" config MACH_P10_LUNGO_01_BD bool "P10 lungo Rev 0.1 board" config MACH_P10_LUNGO_WIFI_01_BD bool "P10 lungo Wifi Rev 0.1 board" endchoice choice prompt "P10 DP version" depends on MACH_P10 default MACH_P10_DP_01 config MACH_P10_DP_00 bool "P10 DP 0.0(evt0.0)" config MACH_P10_DP_01 bool "P10 DP 0.1(evt0.1)" endchoice choice prompt "DP FrameRate of P10" depends on MACH_P10 default DP_40HZ_P10 config DP_40HZ_P10 bool "support 40HZ for DP of P10" config DP_60HZ_P10 bool "support 60HZ for DP of P10" endchoice endmenu config EXYNOS5_DEV_BTS bool "Support BTS driver" select S5P_BTS help Compile in platform device definitions for BTS devices menu "MMC/SD slot setup" depends on PLAT_S5P comment "SELECT SYNOPSYS CONTROLLER INTERFACE DRIVER" config EXYNOS4_DEV_DWMCI bool "DWMCI" depends on PLAT_S5P && MMC_DW default n help IF DWMCI is used, SDHC channel 0 is disabled. config EXYNOS5_DEV_DWMCI1 bool help Compile in platform device definitions for DWMCI channel 1 config EXYNOS5_DEV_DWMCI2 bool help Compile in platform device definitions for DWMCI channel 2 config EXYNOS5_DEV_DWMCI3 bool help Compile in platform device definitions for DWMCI channel 3 config EXYNOS4_DEV_MSHC bool "MSHCI" depends on PLAT_S5P default n help IF MSHC is used, SDHC channel 0 is disabled. choice prompt "Use Special PLL for MSHC" depends on PLAT_S5P && EXYNOS4_DEV_MSHC help This feature change MMC4OUT's clock source between MPLL and EPLL default EXYNOS4_MSHC_MPLL_40MHZ config EXYNOS4_MSHC_MPLL_40MHZ bool "MPLL" config EXYNOS4_MSHC_VPLL_46MHZ bool "VPLL" config EXYNOS4_MSHC_EPLL_45MHZ bool "EPLL" endchoice config EXYNOS4_MSHC_SUPPORT_PQPRIME_EPLL bool "Support EPLL 45MHz for PegasusQ Prime dynamically" depends on PLAT_S5P && EXYNOS4_DEV_MSHC && EXYNOS4_MSHC_MPLL_40MHZ default n comment "Use 8-bit bus width" config EXYNOS4_MSHC_8BIT bool "MSHC with 8-bit bus" depends on PLAT_S5P && EXYNOS4_DEV_MSHC default n help IF MSHC uses 8-bit bus, SDHC channel 1 is disabled. config EXYNOS4_SDHCI_CH0_8BIT bool "SDHC Channel 0 with 8-bit bus" depends on PLAT_S5P && !EXYNOS4_DEV_DWMCI && !EXYNOS4_DEV_MSHC default n help Support HSMMC Channel 0 8-bit bus. If selected, Channel 1 is disabled. config EXYNOS4_SDHCI_CH2_8BIT bool "SDHC Channel 2 with 8-bit bus" help Support HSMMC Channel 2 8-bit bus. If selected, Channel 3 is disabled. comment "Use DDR" depends on PLAT_S5P && EXYNOS4_DEV_MSHC config EXYNOS4_MSHC_DDR depends on PLAT_S5P && EXYNOS4_DEV_MSHC bool "MSHC with DDR mode" default n help Enabling DDR(Dual Data Rate) mode. endmenu comment "Miscellaneous drivers" config WAKEUP_ASSIST bool "Wakeup assist driver" depends on PM help If the wakeup time is too slow, toggling POWER butten shortly causes to ignore report of key event. It makes the android system not execute wake up codes. If selected, the wakeup assistant driver will report POWER key event directly endif config EXYNOS_C2C bool "C2C device support" depends on SAMSUNG_C2C default y help Add C2C device driver config S3C64XX_DEV_SPI0 bool depends on S3C64XX_DEV_SPI default n help Samsung S3C64XX series type SPI config EXYNOS_DEV_C2C bool depends on EXYNOS_C2C default y comment "Debugging Feature" menuconfig SEC_DEBUG bool "Samsung TN Ramdump Feature" default y help Samsung TN Ramdump Feature. Use INFORM3 and magic number at 0xc0000000. if SEC_DEBUG config SEC_DEBUG_SCHED_LOG bool "Samsung Scheduler Logging Feature" default n help Samsung Scheduler Logging Feature for Debug use. config SEC_DEBUG_HRTIMER_LOG bool "Samsung hrtimer Logging Feature" default n depends on SEC_DEBUG_SCHED_LOG && !SAMSUNG_PRODUCT_SHIP help Samsung hrtimer Logging Feature for Debug use. This option enables us to log hrtimer enter/exit. config SEC_DEBUG_SOFTIRQ_LOG bool "Samsung Softirq Logging Feature" default n depends on SEC_DEBUG_SCHED_LOG help Samsung Softirq Logging Feature for Debug use. This option enables us to log softirq enter/exit. It is not only hard-irq which results in scheduler lockup, To be more clear we need to see also softirq logs. config SEC_DEBUG_SCHED_LOG_NONCACHED bool "Samsung Scheduler Logging on noncached buf" depends on SEC_DEBUG_SCHED_LOG default n help This option enables sec_debug_sched_log_noncached support. It can support non-cached sched log in RAM dump and We don't need to concern cache flush status for analyzing sudden lockup issue. config SEC_DEBUG_SEMAPHORE_LOG bool "Samsung Semaphore Logging Feature" default n help Samsung Semaphore Logging Feature for Debug use. config SEC_DEBUG_USER bool "Panic on Userspace fault" default y help Panic on Userspace fault config SEC_DEBUG_PM_TEMP bool "Temporary Logging for Sleep/Wakeup Issue" default n help Verbose Log on Sleep/Wakeup. config SEC_DEBUG_IRQ_EXIT_LOG bool "Temporary Logging for IRQ delay" default n help Verbose Logging for IRQ delay. config SEC_DEBUG_AUXILIARY_LOG bool "Samsung Auxiliary Logging on noncached buf" default n help This option enables sec_auxiliary_log support. we can log repeated information insuitable for kernel log like DVFS or power domain control information. It can support non-cached auxiliary log in RAM dump and We don't need to concern cache flush status for analyzing sudden system hang issue. config SEC_DEBUG_FUPLOAD_DUMP_MORE bool "Dump more information at forced upload" default n help More information is printed out when a forced upload happens. It uses customized dump functions instead of panic call. config SEC_DEBUG_UMP_ALLOC_FAIL bool "Show warning message when UMP allcation fails" default n help When UMP allocation fails there's no way to figure out the reason. For UMP and Mali is supposed to allocate per 1 page, we should take a good look at this failure. This only shows the alloc fail warning. config SEC_DEBUG_LIST_CORRUPTION bool "Panic when list corruption detected" default n help Panic when list structure corruption detected. Sometimes list corruptions are reported. But it reports only with WARN level. This will immediately stop the system. menuconfig SEC_WATCHDOG_RESET bool "S5PV310 watchdog reset to exit from lockup" depends on (CPU_EXYNOS4210 || CPU_EXYNOS4212 || CPU_EXYNOS4412) default n help Use watchdog reset to exit from lockup if SEC_WATCHDOG_RESET config SEC_WATCHDOG_PET_TIME int "sec watchdog kicking time interval value" default 5 endif endif config SEC_LOG default n bool "Enable support for sec_log" if EMBEDDED depends on PRINTK help This option enables sec_log support. This provides combined log buffer for both bootloader and kernel. It also preserves previous content before reboot. config SEC_LOG_NONCACHED default n bool "Enable non cached kernel sec_log support" if EMBEDDED depends on SEC_LOG help This option enables sec_non_cached_klog support. It can support non-cached kernel log in RAM dump and We don't need to concern cache flush status for analyzing sudden lockup issue. config SEC_LOG_LAST_KMSG default n bool "Enable /proc/last_kmsg support" if EMBEDDED depends on SEC_LOG help This option enables /proc/last_kmsg support. config EHCI_IRQ_DISTRIBUTION bool "ehci irq distribution" default n if (LINK_DEVICE_USB || LINK_DEVICE_HSIC) config EHCI_MODEM_PORTNUM int "EHCI port number of modem connection" default 2 config CMC_MODEM_HSIC_SYSREV int "System revision number which CMC modem support HSIC i/f" depends on LTE_MODEM_CMC221 default 9 endif if SEC_MODEM comment "Samsung Modem Feature" config LTE_VIA_SWITCH bool default n config SEC_DUAL_MODEM_MODE bool "sec dual modem mode" default n choice prompt "SEC MODEM CONFIG" depends on SEC_MODEM default SEC_MODEM_M0_C2C config SEC_MODEM_M0_C2C bool "M0 with xmm6262 c2c" select UMTS_MODEM_XMM6262 select LINK_DEVICE_HSIC select LINK_DEVICE_C2C select SAMSUNG_C2C select C2C_DEUBG select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_M0 bool "M0 with xmm6262" select UMTS_MODEM_XMM6262 select LINK_DEVICE_HSIC select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_M0_CTC bool "M0 CTC with MDM6600" select CDMA_MODEM_MDM6600 select USBHUB_USB3503 config SEC_MODEM_T0_CU_DUOS bool "T0 CU DUOS with ESC6270" select GSM_MODEM_ESC6270 select LINK_DEVICE_PLD config SEC_MODEM_T0_OPEN_DUOS bool "T0 OPEN DUOS with ESC6270" select GSM_MODEM_ESC6270 select LINK_DEVICE_PLD config SEC_MODEM_M0_GRANDECTC bool "M0 CTC with ESC6270" select GSM_MODEM_ESC6270 config SEC_MODEM_M1 bool "M1 with cmc221" select LTE_MODEM_CMC221 select LINK_DEVICE_DPRAM select LINK_DEVICE_USB select USBHUB_USB3503 select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_C1 bool "C1 with cmc221" select LTE_MODEM_CMC221 select LINK_DEVICE_DPRAM select LINK_DEVICE_USB select USBHUB_USB3503 select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_C1_LGT bool "C1 with CMC221 and CBP7.2" select CDMA_MODEM_CBP72 select LTE_MODEM_CMC221 select LTE_VIA_SWITCH select LINK_DEVICE_DPRAM select LINK_DEVICE_USB select USBHUB_USB3503 select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_M2 bool "M2 with MDM9x15" config SEC_MODEM_U1 bool "U1 with xmm6260" select UMTS_MODEM_XMM6260 select LINK_DEVICE_HSIC select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_U1_LGT bool "U1 with mdm6600" select CDMA_MODEM_MDM6600 select LINK_DEVICE_DPRAM config SEC_MODEM_GAIA bool "GAIA with cmc221" select LTE_MODEM_CMC221 select LINK_DEVICE_DPRAM config SEC_MODEM_IRON bool "Iron with xmm6262" select UMTS_MODEM_XMM6262 select LINK_DEVICE_HSIC select EHCI_IRQ_DISTRIBUTION config SEC_MODEM_P8LTE bool "P8 VZW with CMC220 and CBP7.1" select CDMA_MODEM_CBP71 select LINK_DEVICE_DPRAM select LTE_MODEM_CMC220 select LINK_DEVICE_USB select INTERNAL_MODEM_IF config SEC_MODEM_T0_TD_DUAL bool "T0 with SPRD8803 & XMM6262" select UMTS_MODEM_XMM6262 select LINK_DEVICE_HSIC select EHCI_IRQ_DISTRIBUTION select TDSCDMA_MODEM_SPRD8803 select LINK_DEVICE_SPI config SEC_MODEM_U1_SPR bool "U1 with qsc6085" select CDMA_MODEM_QSC6085 select LINK_DEVICE_DPRAM select INTERNAL_MODEM_IF endchoice endif comment "Connectivity Feature" config GPS_BRCM_475X bool "BRCM_475X_CHIPSET" default n if BT config BT_CSR8811 bool "Enable CSR8811 driver" default n config BT_BCM4330 bool "Enable BCM4330 driver" default n config BT_BCM4334 bool "Enable BCM4334 driver" default n help Adds BCM4334 RFKILL driver for Broadcom BCM4334 chipset config BT_BCM43241 bool "Enable BCM43241 driver" default n help Adds BCM43241 RFKILL driver for Broadcom BCM4334 chipset config BT_MGMT bool "Bluetooth Mgmt" default n help This is for bluetooth mgmt endif comment "Qualcomm Modem Feature" config QC_MODEM bool "Qualcomm modem support" default n config MSM_SUBSYSTEM_RESTART bool "QC Modem restart handler" default n config QC_MODEM_MDM9X15 bool "support QC mdm9x15 modem" default n config MDM_HSIC_PM bool "support QC mdm9x15 PM over HSIC" default n config EMI_ERROR_RECOVERY bool "unsuspected emi error recovery on HUB" default n config SIM_DETECT bool "support sim detect" default n if QC_MODEM choice prompt "QC MODEM CONFIG" depends on QC_MODEM default QC_MODEM_M3 config QC_MODEM_M3 bool "M3 support QMI interface over HSIC" select MODEM_SUPPORT_QMI_INTERFACE select MSM_SUBSYSTEM_RESTART select USB_QCOM_DIAG_BRIDGE select USB_QCOM_MDM_BRIDGE select QC_MODEM_MDM9X15 select USB_NET_QMI_WWAN select DIAG_CHAR select MDM_HSIC_PM endchoice endif config USB_CDFS_SUPPORT bool "Auto install for cdfs" default y config SAMSUNG_PRODUCT_SHIP bool "set up for product shippling" default n config CORESIGHT_ETM bool "CoreSight ETM debug system" help Enables the CoreSight ETM debug system. config CORESIGHT_ETM_DEFAULT_ENABLE bool "Turn on ETM Tracing by Default" depends on CORESIGHT_ETM help Turns on ETM tracing by default. Otherwise, tracing is disabled by default but can be enabled by other means. config MACH_KONA_SENSOR bool "KONA Sensor Enable" help Support sensors of KONA boards BMA254 / BOSCH YAS532 / YAMAHA GP2A030A / SHARP