/* * File: arch/blackfin/mach-bf533/boards/cm_bf533.c * Based on: arch/blackfin/mach-bf533/boards/ezkit.c * Author: Aidan Williams Copyright 2005 * * Created: 2005 * Description: Board description file * * Modified: * Copyright 2004-2006 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see the file COPYING, or write * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Name the Board for the /proc/cpuinfo */ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, } }; static struct flash_platform_data bfin_spi_flash_data = { .name = "m25p80", .parts = bfin_spi_flash_partitions, .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), .type = "m25p64", }; /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ .bits_per_word = 8, }; #endif /* SPI ADC chip */ #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) static struct bfin5xx_spi_chip spi_adc_chip_info = { .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, }; #endif #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, }; #endif #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, .bits_per_word = 8, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ .chip_select = 2, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, }, #endif #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif }; /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { .start = SPI0_REGBASE, .end = SPI0_REGBASE + 0xFF, .flags = IORESOURCE_MEM, }, [1] = { .start = CH_SPI, .end = CH_SPI, .flags = IORESOURCE_IRQ, } }; /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { .name = "bfin-spi", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, .dev = { .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { { .start = 0x20200300, .end = 0x20200300 + 16, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF0, .end = IRQ_PF0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, }; static struct platform_device bfin_uart_device = { .name = "bfin-uart", .id = 1, .num_resources = ARRAY_SIZE(bfin_uart_resources), .resource = bfin_uart_resources, }; #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) static struct resource bfin_sir_resources[] = { #ifdef CONFIG_BFIN_SIR0 { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, #endif }; static struct platform_device bfin_sir_device = { .name = "bfin_sir", .id = 0, .num_resources = ARRAY_SIZE(bfin_sir_resources), .resource = bfin_sir_resources, }; #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, }; #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, .end = 0x20308000, .flags = IORESOURCE_MEM, }, { .start = 0x20308004, .end = 0x20308004, .flags = IORESOURCE_MEM, }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ, }, }; static struct isp1362_platform_data isp1362_priv = { .sel15Kres = 1, .clknotstop = 0, .oc_enable = 0, .int_act_high = 0, .int_edge_triggered = 0, .remote_wakeup_connected = 0, .no_power_switching = 1, .power_switching_mode = 0, }; static struct platform_device isp1362_hcd_device = { .name = "isp1362-hcd", .id = 0, .dev = { .platform_data = &isp1362_priv, }, .num_resources = ARRAY_SIZE(isp1362_hcd_resources), .resource = isp1362_hcd_resources, }; #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define PATA_INT 38 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, }; static struct resource bfin_pata_resources[] = { { .start = 0x2030C000, .end = 0x2030C01F, .flags = IORESOURCE_MEM, }, { .start = 0x2030D018, .end = 0x2030D01B, .flags = IORESOURCE_MEM, }, { .start = PATA_INT, .end = PATA_INT, .flags = IORESOURCE_IRQ, }, }; static struct platform_device bfin_pata_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(bfin_pata_resources), .resource = bfin_pata_resources, .dev = { .platform_data = &bfin_pata_platform_data, } }; #endif static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_085, 250000000), VRPAIR(VLEV_090, 376000000), VRPAIR(VLEV_095, 426000000), VRPAIR(VLEV_100, 426000000), VRPAIR(VLEV_105, 476000000), VRPAIR(VLEV_110, 476000000), VRPAIR(VLEV_115, 476000000), VRPAIR(VLEV_120, 600000000), VRPAIR(VLEV_125, 600000000), VRPAIR(VLEV_130, 600000000), }; static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { .tuple_tab = cclk_vlev_datasheet, .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), .vr_settling_time = 25 /* us */, }; static struct platform_device bfin_dpmc = { .name = "bfin dpmc", .dev = { .platform_data = &bfin_dmpc_vreg_data, }, }; static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_dpmc, #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) &bfin_sir_device, #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, #endif #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif }; static int __init cm_bf533_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif return 0; } arch_initcall(cm_bf533_init);