menu "CPU Frequency scaling" config CPU_FREQ bool "CPU Frequency scaling" help CPU Frequency scaling allows you to change the clock speed of CPUs on the fly. This is a nice method to save power, because the lower the CPU clock speed, the less power the CPU consumes. Note that this driver doesn't automatically change the CPU clock speed, you need to either enable a dynamic cpufreq governor (see below) after boot, or use a userspace tool. For details, take a look at . If in doubt, say N. if CPU_FREQ config HAS_BLUETOOTH_DEADLOCKS bool "System has bluetooth deadlocks" depends on BT_BCM4334 default y help It seems that Android Lollipop introduced a bug which causes an event listener to deadlock when A2DP is used and governor forces only one core to stay awake. This hack prevents such situation by always leaving at least two cores online. I wish we could get rid of this at some point. config CPU_FREQ_TABLE tristate config CPU_FREQ_STAT tristate "CPU frequency translation statistics" select CPU_FREQ_TABLE default y help This driver exports CPU frequency statistics information through sysfs file system. To compile this driver as a module, choose M here: the module will be called cpufreq_stats. If in doubt, say N. config CPU_FREQ_STAT_DETAILS bool "CPU frequency translation statistics details" depends on CPU_FREQ_STAT help This will show detail CPU frequency translation table in sysfs file system. If in doubt, say N. choice prompt "Default CPUFreq governor" default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 default CPU_FREQ_DEFAULT_GOV_PERFORMANCE help This option sets which CPUFreq governor shall be loaded at startup. If in doubt, select 'performance'. config CPU_FREQ_DEFAULT_GOV_PERFORMANCE bool "performance" select CPU_FREQ_GOV_PERFORMANCE help Use the CPUFreq governor 'performance' as default. This sets the frequency statically to the highest frequency supported by the CPU. config CPU_FREQ_DEFAULT_GOV_POWERSAVE bool "powersave" depends on EXPERT select CPU_FREQ_GOV_POWERSAVE help Use the CPUFreq governor 'powersave' as default. This sets the frequency statically to the lowest frequency supported by the CPU. config CPU_FREQ_DEFAULT_GOV_USERSPACE bool "userspace" select CPU_FREQ_GOV_USERSPACE help Use the CPUFreq governor 'userspace' as default. This allows you to set the CPU frequency manually or when a userspace program shall be able to set the CPU dynamically without having to enable the userspace governor manually. config CPU_FREQ_DEFAULT_GOV_ONDEMAND bool "ondemand" select CPU_FREQ_GOV_ONDEMAND select CPU_FREQ_GOV_PERFORMANCE help Use the CPUFreq governor 'ondemand' as default. This allows you to get a full dynamic frequency capable system by simply loading your cpufreq low-level hardware driver. Be aware that not all cpufreq drivers support the ondemand governor. If unsure have a look at the help section of the driver. Fallback governor will be the performance governor. config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE bool "conservative" select CPU_FREQ_GOV_CONSERVATIVE select CPU_FREQ_GOV_PERFORMANCE help Use the CPUFreq governor 'conservative' as default. This allows you to get a full dynamic frequency capable system by simply loading your cpufreq low-level hardware driver. Be aware that not all cpufreq drivers support the conservative governor. If unsure have a look at the help section of the driver. Fallback governor will be the performance governor. config CPU_FREQ_DEFAULT_GOV_INTERACTIVE bool "interactive" select CPU_FREQ_GOV_INTERACTIVE help Use the CPUFreq governor 'interactive' as default. This allows you to get a full dynamic cpu frequency capable system by simply loading your cpufreq low-level hardware driver, using the 'interactive' governor for latency-sensitive workloads. config CPU_FREQ_DEFAULT_GOV_ADAPTIVE bool "adaptive" select CPU_FREQ_GOV_ADAPTIVE help Use the CPUFreq governor 'adaptive' as default. This allows you to get a full dynamic cpu frequency capable system by simply loading your cpufreq low-level hardware driver, using the 'adaptive' governor for latency-sensitive workloads and demanding performance. config CPU_FREQ_DEFAULT_GOV_PEGASUSQ bool "pegasusq" select CPU_FREQ_GOV_PEGASUSQ endchoice config CPU_FREQ_GOV_PERFORMANCE tristate "'performance' governor" help This cpufreq governor sets the frequency statically to the highest available CPU frequency. To compile this driver as a module, choose M here: the module will be called cpufreq_performance. If in doubt, say Y. config CPU_FREQ_GOV_POWERSAVE tristate "'powersave' governor" help This cpufreq governor sets the frequency statically to the lowest available CPU frequency. To compile this driver as a module, choose M here: the module will be called cpufreq_powersave. If in doubt, say Y. config CPU_FREQ_GOV_USERSPACE tristate "'userspace' governor for userspace frequency scaling" help Enable this cpufreq governor when you either want to set the CPU frequency manually or when a userspace program shall be able to set the CPU dynamically, like on LART . To compile this driver as a module, choose M here: the module will be called cpufreq_userspace. For details, take a look at . If in doubt, say Y. config CPU_FREQ_GOV_ONDEMAND tristate "'ondemand' cpufreq policy governor" select CPU_FREQ_TABLE help 'ondemand' - This driver adds a dynamic cpufreq policy governor. The governor does a periodic polling and changes frequency based on the CPU utilization. The support for this governor depends on CPU capability to do fast frequency switching (i.e, very low latency frequency transitions). To compile this driver as a module, choose M here: the module will be called cpufreq_ondemand. For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. config CPU_FREQ_GOV_ONDEMAND_FLEXRATE bool "flexrate interface for 'ondemand' cpufreq policy governor" depends on CPU_FREQ_GOV_ONDEMAND help Flexrate for 'ondemand' governor provides an interface to request faster polling temporarily. This is to let it react quickly to load changes when there is high probablity of load increase in short time. For example, when a user event occurs, we have use this interface. It does not increase the frequency unconditionally; however, it allows ondemand to react fast by temporarily decreasing sampling rate. Flexrate provides both sysfs interface and in-kernel interface. config CPU_FREQ_GOV_ONDEMAND_FLEXRATE_MAX_DURATION int "flexrate's maximum duration of sampling rate override" range 5 500 depends on CPU_FREQ_GOV_ONDEMAND_FLEXRATE default "100" help The maximum number of ondemand sampling whose rate is overriden by Flexrate for ondemand. config CPU_FREQ_GOV_INTERACTIVE tristate "'interactive' cpufreq policy governor" help 'interactive' - This driver adds a dynamic cpufreq policy governor designed for latency-sensitive workloads. This governor attempts to reduce the latency of clock increases so that the system is more responsive to interactive workloads. To compile this driver as a module, choose M here: the module will be called cpufreq_interactive. For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. config CPU_FREQ_GOV_CONSERVATIVE tristate "'conservative' cpufreq governor" depends on CPU_FREQ help 'conservative' - this driver is rather similar to the 'ondemand' governor both in its source code and its purpose, the difference is its optimisation for better suitability in a battery powered environment. The frequency is gracefully increased and decreased rather than jumping to 100% when speed is required. If you have a desktop machine then you should really be considering the 'ondemand' governor instead, however if you are using a laptop, PDA or even an AMD64 based computer (due to the unacceptable step-by-step latency issues between the minimum and maximum frequency transitions in the CPU) you will probably want to use this governor. To compile this driver as a module, choose M here: the module will be called cpufreq_conservative. For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. config CPU_FREQ_GOV_ADAPTIVE tristate "'adaptive' cpufreq policy governor" help 'adaptive' - This driver adds a dynamic cpufreq policy governor designed for latency-sensitive workloads and also for demanding performance. This governor attempts to reduce the latency of clock increases so that the system is more responsive to interactive workloads in loweset steady-state but to to reduce power consumption in middle operation level level up will be done in step by step to prohibit system from going to max operation level. To compile this driver as a module, choose M here: the module will be called cpufreq_adaptive. For details, take a look at linux/Documentation/cpu-freq. If in doubt, say N. config CPU_FREQ_GOV_PEGASUSQ tristate "'pegasusq' cpufreq policy governor" config CPU_FREQ_GOV_SLP tristate "'slp' cpufreq policy governor" config SLP_CHECK_CPU_LOAD bool "check load and frequency of cpu" depends on CPU_FREQ_GOV_SLP config SLP_GOV_DYNAMIC_PARAMS bool "check SLP GOV. Dynamic Params feature" depends on CPU_FREQ_GOV_SLP config CPU_FREQ_DVFS_MONITOR bool "dvfs monitor" depends on CPU_FREQ help This option adds a proc node for dvfs monitoring. /proc/dvfs_mon menu "x86 CPU frequency scaling drivers" depends on X86 source "drivers/cpufreq/Kconfig.x86" endmenu endif endmenu