# bcmdhd
#####################
# SDIO Basic feature
#####################

DHDCFLAGS += -Wall -Wstrict-prototypes -Dlinux -DLINUX -DBCMDRIVER             \
        -DBCMDONGLEHOST -DUNRELEASEDCHIP -DBCMDMA32 -DBCMFILEIMAGE            \
        -DDHDTHREAD -DBDC -DOOB_INTR_ONLY                                     \
        -DDHD_BCMEVENTS -DSHOW_EVENTS -DBCMDBG                                \
        -DMMC_SDIO_ABORT -DBCMSDIO -DBCMLXSDMMC -DBCMPLATFORM_BUS -DWLP2P     \
        -DWIFI_ACT_FRAME -DARP_OFFLOAD_SUPPORT          \
        -DKEEP_ALIVE -DCSCAN -DPKT_FILTER_SUPPORT                             \
        -DEMBEDDED_PLATFORM -DPNO_SUPPORT

#################
# Common feature
#################

DHDCFLAGS += -DCUSTOMER_HW4
DHDCFLAGS += -DDEBUGFS_CFG80211
DHDCFLAGS += -DBLOCK_IPV6_PACKET
DHDCFLAGS += -DSUPPORT_DEEP_SLEEP
DHDCFLAGS += -DSIMPLE_MAC_PRINT

# Print out kernel panic point of file and line info when assertion happened 
DHDCFLAGS += -DBCMASSERT_LOG 

# For p2p connection issue
DHDCFLAGS += -DWL_CFG80211_GON_COLLISION
DHDCFLAGS += -DWL_SCB_TIMEOUT=10

# For Passing all multicast packets to host when not in suspend mode.
DHDCFLAGS += -DPASS_ALL_MCAST_PKTS

# Early suspend
DHDCFLAGS += -DDHD_USE_EARLYSUSPEND

DHDCFLAGS += -DSUPPORT_PM2_ONLY

# For Scan result patch
DHDCFLAGS += -DESCAN_RESULT_PATCH
DHDCFLAGS += -DDUAL_ESCAN_RESULT_BUFFER

DHDCFLAGS += -DROAM_ENABLE -DROAM_CHANNEL_CACHE -DROAM_API
DHDCFLAGS += -DENABLE_FW_ROAM_SUSPEND

# For Static Buffer
ifeq ($(CONFIG_BROADCOM_WIFI_RESERVED_MEM),y)
  DHDCFLAGS += -DCONFIG_DHD_USE_STATIC_BUF
  DHDCFLAGS += -DENHANCED_STATIC_BUF
  DHDCFLAGS += -DSTATIC_WL_PRIV_STRUCT
endif

# For CCX
ifeq ($(CONFIG_BRCM_CCX),y)
  DHDCFLAGS += -DBCMCCX
endif

DHDCFLAGS += -DWL_CFG80211

# SoftAP
DHDCFLAGS += -DSUPPORT_AUTO_CHANNEL -DSUPPORT_HIDDEN_AP
DHDCFLAGS += -DSUPPORT_SOFTAP_SINGL_DISASSOC
DHDCFLAGS += -DUSE_STAMAC_4SOFTAP

# DPC priority
DHDCFLAGS += -DCUSTOM_DPC_PRIO_SETTING=49

# WiFi turn off delay
DHDCFLAGS += -DWIFI_TURNOFF_DELAY=100

# DTIM listen interval in suspend mode(0 means follow AP's DTIM period)
DHDCFLAGS += -DCUSTOM_SUSPEND_BCN_LI_DTIM=0

# Priority mismatch fix with kernel stack
DHDCFLAGS += -DPKTPRIO_OVERRIDE

# Ioctl timeout 5000ms
DHDCFLAGS += -DIOCTL_RESP_TIMEOUT=5000

# WiFi Kernel thread type
DHDCFLAGS += -DUSE_KTHREAD_API

############
# JellyBean
############
DHDCFLAGS += -DWL_ENABLE_P2P_IF
DHDCFLAGS += -DMULTIPLE_SUPPLICANT
DHDCFLAGS += -DWL_CFG80211_STA_EVENT

#########################
# Chip dependent feature
#########################

ifneq ($(CONFIG_BCM4335),)
  DHDCFLAGS += -DBCM4335_CHIP -DHW_OOB -DSUPPORT_MULTIPLE_REVISION
  DHDCFLAGS += -DDHD_USE_IDLECOUNT
  DHDCFLAGS += -DSUPPORT_AMPDU_MPDU_CMD
  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
  DHDCFLAGS += -DUSE_CID_CHECK -DCONFIG_CONTROL_PM
  DHDCFLAGS += -DPROP_TXSTATUS -DPROP_TXSTATUS_VSDB
  DHDCFLAGS += -DVSDB
  DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=5 -DCUSTOM_RXCHAIN=1
  DHDCFLAGS += -DENABLE_BCN_LI_BCN_WAKEUP 
  DHDCFLAGS += -DROAM_AP_ENV_DETECTION
  DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
  DHDCFLAGS += -DDHDTCPACK_SUPPRESS
# DHDCFLAGS += -DDHD_SET_FW_HIGHSPEED
  DHDCFLAGS += -DUSE_WL_TXBF
  DHDCFLAGS += -DUSE_WL_FRAMEBURST
  DHDCFLAGS += -DSDIO_CRC_ERROR_FIX
  DHDCFLAGS += -DRXFRAME_THREAD
  DHDCFLAGS += -DREPEAT_READFRAME
  DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
  DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=40
  DHDCFLAGS += -DWL11U
  DHDCFLAGS += -DBCMCCX
  DHDCFLAGS += -DWES_SUPPORT
  DHDCFLAGS += -DOKC_SUPPORT
  DHDCFLAGS += -DWLTDLS
# DHDCFLAGS += -DTPUT_DEBUG
  DHDCFLAGS += -DWLFBT
  DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=32
# For BT LOCK
ifeq ($(CONFIG_BCM4335BT),y)
  DHDCFLAGS += -DENABLE_4335BT_WAR
endif
  # Remove define for BCM4335
  DHDCFLAGS :=$(filter-out -DWL_CFG80211_GON_COLLISION,$(DHDCFLAGS))
endif

ifneq ($(CONFIG_BCM4334),)
  DHDCFLAGS += -DBCM4334_CHIP -DHW_OOB -DSUPPORT_MULTIPLE_REVISION
  DHDCFLAGS += -DUSE_CID_CHECK -DCONFIG_CONTROL_PM
  DHDCFLAGS += -DPROP_TXSTATUS -DPROP_TXSTATUS_VSDB
  DHDCFLAGS += -DVSDB
  DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
  DHDCFLAGS += -DDHD_USE_IDLECOUNT
  DHDCFLAGS += -DSUPPORT_AMPDU_MPDU_CMD
  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=64
  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=5 -DENABLE_BCN_LI_BCN_WAKEUP
  DHDCFLAGS += -DROAM_AP_ENV_DETECTION
  DHDCFLAGS += -DWES_SUPPORT
  DHDCFLAGS :=$(filter-out -DWL_CFG80211_GON_COLLISION,$(DHDCFLAGS))
endif

ifneq ($(CONFIG_BCM4330),)
  DHDCFLAGS += -DBCM4330_CHIP
  DHDCFLAGS += -DMCAST_LIST_ACCUMULATION
  DHDCFLAGS += -DCONFIG_CONTROL_PM
  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=0
  DHDCFLAGS += -DPASS_ARP_PACKET
  DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
endif

ifneq ($(CONFIG_BCM43241),)
  DHDCFLAGS += -DBCM43241_CHIP -DHW_OOB
  DHDCFLAGS += -DCONFIG_CONTROL_PM
  DHDCFLAGS += -DPROP_TXSTATUS
  DHDCFLAGS += -DVSDB
  DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
  DHDCFLAGS += -DDHD_USE_IDLECOUNT
  DHDCFLAGS += -DSUPPORT_AMPDU_MPDU_CMD
  DHDCFLAGS += -DMIMO_ANT_SETTING -DAMPDU_HOSTREORDER
  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=1 -DCUSTOM_SDIO_F2_BLKSIZE=128
  DHDCFLAGS += -DROAM_AP_ENV_DETECTION
  DHDCFLAGS += -DSDIO_CRC_ERROR_FIX
  DHDCFLAGS :=$(filter-out -DWL_CFG80211_GON_COLLISION,$(DHDCFLAGS))
  ifeq ($(CONFIG_BCM43241),m)
    DHDCFLAGS += -fno-pic
  endif
endif


#############################
# Platform dependent feature
#############################

ifeq ($(CONFIG_SPI_SC8810),y)
  DHDCFLAGS += -DREAD_MACADDR -DBCMSPI -DBCMSPI_ANDROID -DSPI_PIO_32BIT_RW -DSPI_PIO_RW_BIGENDIAN -DDISABLE_11N

  #Remove defines for SDMMC
  DHDCFLAGS :=$(filter-out -DOOB_INTR_ONLY,$(DHDCFLAGS))
  DHDCFLAGS :=$(filter-out -DBCMLXSDMMC,$(DHDCFLAGS))

  #Remove defines for JB
  DHDCFLAGS :=$(filter-out -DWL_ENABLE_P2P_IF,$(DHDCFLAGS))
  DHDCFLAGS :=$(filter-out -DMULTIPLE_SUPPLICANT,$(DHDCFLAGS))
  DHDCFLAGS :=$(filter-out -DWL_CFG80211_STA_EVENT,$(DHDCFLAGS))
endif

#For INITIAL 2G scan features
#ifneq ($(CONFIG_TARGET_LOCALE_KOR),y)
#  DHDCFLAGS += -DUSE_INITIAL_2G_SCAN
#endif

# For SLP feature
ifeq ($(CONFIG_SLP),y)
  DHDCFLAGS += -DPLATFORM_SLP
  DHDCFLAGS += -UWL_ENABLE_P2P_IF
  DHDCFLAGS += -UMULTIPLE_SUPPLICANT
  DHDCFLAGS += -UWL_CFG80211_STA_EVENT
endif

# GGSM_WIFI_5GHz_CHANNELS feature is define for only GGSM model
ifeq ($(GGSM_WIFI_5GHz_CHANNELS),true)
  DHDCFLAGS += -DCUSTOMER_SET_COUNTRY
endif

ifeq ($(CONFIG_TARGET_LOCALE_CHN),y)
  DHDCFLAGS += -DBCMWAPI_WPI -DBCMWAPI_WAI
endif

##############################################################
# dhd_sec_feature.h
DHDCFLAGS += -include "dhd_sec_feature.h"
##############################################################

#########
# Others
#########

EXTRA_LDFLAGS += --strip-debug

EXTRA_CFLAGS += $(DHDCFLAGS) -DDHD_DEBUG
EXTRA_CFLAGS += -DSRCBASE=\"$(src)\"
EXTRA_CFLAGS += -I$(src)/include/ -I$(src)/
KBUILD_CFLAGS += -I$(LINUXDIR)/include -I$(shell pwd)

DHDOFILES := bcmsdh.o bcmsdh_linux.o bcmsdh_sdmmc.o bcmsdh_sdmmc_linux.o \
	dhd_cdc.o dhd_common.o dhd_custom_gpio.o dhd_custom_sec.o \
	dhd_linux.o dhd_linux_sched.o dhd_cfg80211.o dhd_sdio.o aiutils.o bcmevent.o \
	bcmutils.o bcmwifi_channels.o hndpmu.o linux_osl.o sbutils.o siutils.o \
	wl_android.o wl_cfg80211.o wl_cfgp2p.o wldev_common.o wl_linux_mon.o wl_roam.o

# For SPI projects
ifeq ($(CONFIG_SPI_SC8810),y)
DHDOFILES += bcmsdspi_linux.o bcmspibrcm.o
DHDOFILES :=$(filter-out bcmsdh_sdmmc.o,$(DHDOFILES))
DHDOFILES :=$(filter-out bcmsdh_sdmmc_linux.o,$(DHDOFILES))
endif

dhd-y := $(DHDOFILES)
obj-m   += dhd.o

all:
	@echo "$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules"
	@$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules

clean:
	rm -rf *.o *.ko *.mod.c *~ .*.cmd *.o.cmd .*.o.cmd \
	Module.symvers modules.order .tmp_versions modules.builtin

install:
	@$(MAKE) --no-print-directory -C $(KDIR) \
		SUBDIRS=$(CURDIR) modules_install