/******************************************************************************* * Filename: target_core_pr.c * * This file contains SPC-3 compliant persistent reservations and * legacy SPC-2 reservations with compatible reservation handling (CRH=1) * * Copyright (c) 2009, 2010 Rising Tide Systems * Copyright (c) 2009, 2010 Linux-iSCSI.org * * Nicholas A. Bellinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ******************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "target_core_hba.h" #include "target_core_pr.h" #include "target_core_ua.h" /* * Used for Specify Initiator Ports Capable Bit (SPEC_I_PT) */ struct pr_transport_id_holder { int dest_local_nexus; struct t10_pr_registration *dest_pr_reg; struct se_portal_group *dest_tpg; struct se_node_acl *dest_node_acl; struct se_dev_entry *dest_se_deve; struct list_head dest_list; }; int core_pr_dump_initiator_port( struct t10_pr_registration *pr_reg, char *buf, u32 size) { if (!(pr_reg->isid_present_at_reg)) return 0; snprintf(buf, size, ",i,0x%s", &pr_reg->pr_reg_isid[0]); return 1; } static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *, struct t10_pr_registration *, int); static int core_scsi2_reservation_seq_non_holder( struct se_cmd *cmd, unsigned char *cdb, u32 pr_reg_type) { switch (cdb[0]) { case INQUIRY: case RELEASE: case RELEASE_10: return 0; default: return 1; } return 1; } static int core_scsi2_reservation_check(struct se_cmd *cmd, u32 *pr_reg_type) { struct se_device *dev = cmd->se_dev; struct se_session *sess = cmd->se_sess; int ret; if (!(sess)) return 0; spin_lock(&dev->dev_reservation_lock); if (!dev->dev_reserved_node_acl || !sess) { spin_unlock(&dev->dev_reservation_lock); return 0; } if (dev->dev_reserved_node_acl != sess->se_node_acl) { spin_unlock(&dev->dev_reservation_lock); return -1; } if (!(dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID)) { spin_unlock(&dev->dev_reservation_lock); return 0; } ret = (dev->dev_res_bin_isid == sess->sess_bin_isid) ? 0 : -1; spin_unlock(&dev->dev_reservation_lock); return ret; } static int core_scsi2_reservation_release(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; struct se_session *sess = cmd->se_sess; struct se_portal_group *tpg = sess->se_tpg; if (!(sess) || !(tpg)) return 0; spin_lock(&dev->dev_reservation_lock); if (!dev->dev_reserved_node_acl || !sess) { spin_unlock(&dev->dev_reservation_lock); return 0; } if (dev->dev_reserved_node_acl != sess->se_node_acl) { spin_unlock(&dev->dev_reservation_lock); return 0; } dev->dev_reserved_node_acl = NULL; dev->dev_flags &= ~DF_SPC2_RESERVATIONS; if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) { dev->dev_res_bin_isid = 0; dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID; } printk(KERN_INFO "SCSI-2 Released reservation for %s LUN: %u ->" " MAPPED LUN: %u for %s\n", TPG_TFO(tpg)->get_fabric_name(), SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); spin_unlock(&dev->dev_reservation_lock); return 0; } static int core_scsi2_reservation_reserve(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; struct se_session *sess = cmd->se_sess; struct se_portal_group *tpg = sess->se_tpg; if ((T_TASK(cmd)->t_task_cdb[1] & 0x01) && (T_TASK(cmd)->t_task_cdb[1] & 0x02)) { printk(KERN_ERR "LongIO and Obselete Bits set, returning" " ILLEGAL_REQUEST\n"); return PYX_TRANSPORT_ILLEGAL_REQUEST; } /* * This is currently the case for target_core_mod passthrough struct se_cmd * ops */ if (!(sess) || !(tpg)) return 0; spin_lock(&dev->dev_reservation_lock); if (dev->dev_reserved_node_acl && (dev->dev_reserved_node_acl != sess->se_node_acl)) { printk(KERN_ERR "SCSI-2 RESERVATION CONFLIFT for %s fabric\n", TPG_TFO(tpg)->get_fabric_name()); printk(KERN_ERR "Original reserver LUN: %u %s\n", SE_LUN(cmd)->unpacked_lun, dev->dev_reserved_node_acl->initiatorname); printk(KERN_ERR "Current attempt - LUN: %u -> MAPPED LUN: %u" " from %s \n", SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); spin_unlock(&dev->dev_reservation_lock); return PYX_TRANSPORT_RESERVATION_CONFLICT; } dev->dev_reserved_node_acl = sess->se_node_acl; dev->dev_flags |= DF_SPC2_RESERVATIONS; if (sess->sess_bin_isid != 0) { dev->dev_res_bin_isid = sess->sess_bin_isid; dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID; } printk(KERN_INFO "SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u" " for %s\n", TPG_TFO(tpg)->get_fabric_name(), SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); spin_unlock(&dev->dev_reservation_lock); return 0; } static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *, struct se_node_acl *, struct se_session *); static void core_scsi3_put_pr_reg(struct t10_pr_registration *); /* * Setup in target_core_transport.c:transport_generic_cmd_sequencer() * and called via struct se_cmd->transport_emulate_cdb() in TCM processing * thread context. */ int core_scsi2_emulate_crh(struct se_cmd *cmd) { struct se_session *se_sess = cmd->se_sess; struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev; struct t10_pr_registration *pr_reg; struct t10_reservation_template *pr_tmpl = &su_dev->t10_reservation; unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; int crh = (T10_RES(su_dev)->res_type == SPC3_PERSISTENT_RESERVATIONS); int conflict = 0; if (!(se_sess)) return 0; if (!(crh)) goto after_crh; pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, se_sess); if (pr_reg) { /* * From spc4r17 5.7.3 Exceptions to SPC-2 RESERVE and RELEASE * behavior * * A RESERVE(6) or RESERVE(10) command shall complete with GOOD * status, but no reservation shall be established and the * persistent reservation shall not be changed, if the command * is received from a) and b) below. * * A RELEASE(6) or RELEASE(10) command shall complete with GOOD * status, but the persistent reservation shall not be released, * if the command is received from a) and b) * * a) An I_T nexus that is a persistent reservation holder; or * b) An I_T nexus that is registered if a registrants only or * all registrants type persistent reservation is present. * * In all other cases, a RESERVE(6) command, RESERVE(10) command, * RELEASE(6) command, or RELEASE(10) command shall be processed * as defined in SPC-2. */ if (pr_reg->pr_res_holder) { core_scsi3_put_pr_reg(pr_reg); return 0; } if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) || (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { core_scsi3_put_pr_reg(pr_reg); return 0; } core_scsi3_put_pr_reg(pr_reg); conflict = 1; } else { /* * Following spc2r20 5.5.1 Reservations overview: * * If a logical unit has executed a PERSISTENT RESERVE OUT * command with the REGISTER or the REGISTER AND IGNORE * EXISTING KEY service action and is still registered by any * initiator, all RESERVE commands and all RELEASE commands * regardless of initiator shall conflict and shall terminate * with a RESERVATION CONFLICT status. */ spin_lock(&pr_tmpl->registration_lock); conflict = (list_empty(&pr_tmpl->registration_list)) ? 0 : 1; spin_unlock(&pr_tmpl->registration_lock); } if (conflict) { printk(KERN_ERR "Received legacy SPC-2 RESERVE/RELEASE" " while active SPC-3 registrations exist," " returning RESERVATION_CONFLICT\n"); return PYX_TRANSPORT_RESERVATION_CONFLICT; } after_crh: if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10)) return core_scsi2_reservation_reserve(cmd); else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10)) return core_scsi2_reservation_release(cmd); else return PYX_TRANSPORT_INVALID_CDB_FIELD; } /* * Begin SPC-3/SPC-4 Persistent Reservations emulation support * * This function is called by those initiator ports who are *NOT* * the active PR reservation holder when a reservation is present. */ static int core_scsi3_pr_seq_non_holder( struct se_cmd *cmd, unsigned char *cdb, u32 pr_reg_type) { struct se_dev_entry *se_deve; struct se_session *se_sess = SE_SESS(cmd); int other_cdb = 0, ignore_reg; int registered_nexus = 0, ret = 1; /* Conflict by default */ int all_reg = 0, reg_only = 0; /* ALL_REG, REG_ONLY */ int we = 0; /* Write Exclusive */ int legacy = 0; /* Act like a legacy device and return * RESERVATION CONFLICT on some CDBs */ /* * A legacy SPC-2 reservation is being held. */ if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) return core_scsi2_reservation_seq_non_holder(cmd, cdb, pr_reg_type); se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; /* * Determine if the registration should be ignored due to * non-matching ISIDs in core_scsi3_pr_reservation_check(). */ ignore_reg = (pr_reg_type & 0x80000000); if (ignore_reg) pr_reg_type &= ~0x80000000; switch (pr_reg_type) { case PR_TYPE_WRITE_EXCLUSIVE: we = 1; case PR_TYPE_EXCLUSIVE_ACCESS: /* * Some commands are only allowed for the persistent reservation * holder. */ if ((se_deve->def_pr_registered) && !(ignore_reg)) registered_nexus = 1; break; case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: we = 1; case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: /* * Some commands are only allowed for registered I_T Nexuses. */ reg_only = 1; if ((se_deve->def_pr_registered) && !(ignore_reg)) registered_nexus = 1; break; case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: we = 1; case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: /* * Each registered I_T Nexus is a reservation holder. */ all_reg = 1; if ((se_deve->def_pr_registered) && !(ignore_reg)) registered_nexus = 1; break; default: return -1; } /* * Referenced from spc4r17 table 45 for *NON* PR holder access */ switch (cdb[0]) { case SECURITY_PROTOCOL_IN: if (registered_nexus) return 0; ret = (we) ? 0 : 1; break; case MODE_SENSE: case MODE_SENSE_10: case READ_ATTRIBUTE: case READ_BUFFER: case RECEIVE_DIAGNOSTIC: if (legacy) { ret = 1; break; } if (registered_nexus) { ret = 0; break; } ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ break; case PERSISTENT_RESERVE_OUT: /* * This follows PERSISTENT_RESERVE_OUT service actions that * are allowed in the presence of various reservations. * See spc4r17, table 46 */ switch (cdb[1] & 0x1f) { case PRO_CLEAR: case PRO_PREEMPT: case PRO_PREEMPT_AND_ABORT: ret = (registered_nexus) ? 0 : 1; break; case PRO_REGISTER: case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: ret = 0; break; case PRO_REGISTER_AND_MOVE: case PRO_RESERVE: ret = 1; break; case PRO_RELEASE: ret = (registered_nexus) ? 0 : 1; break; default: printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" " action: 0x%02x\n", cdb[1] & 0x1f); return -1; } break; case RELEASE: case RELEASE_10: /* Handled by CRH=1 in core_scsi2_emulate_crh() */ ret = 0; break; case RESERVE: case RESERVE_10: /* Handled by CRH=1 in core_scsi2_emulate_crh() */ ret = 0; break; case TEST_UNIT_READY: ret = (legacy) ? 1 : 0; /* Conflict for legacy */ break; case MAINTENANCE_IN: switch (cdb[1] & 0x1f) { case MI_MANAGEMENT_PROTOCOL_IN: if (registered_nexus) { ret = 0; break; } ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ break; case MI_REPORT_SUPPORTED_OPERATION_CODES: case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS: if (legacy) { ret = 1; break; } if (registered_nexus) { ret = 0; break; } ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ break; case MI_REPORT_ALIASES: case MI_REPORT_IDENTIFYING_INFORMATION: case MI_REPORT_PRIORITY: case MI_REPORT_TARGET_PGS: case MI_REPORT_TIMESTAMP: ret = 0; /* Allowed */ break; default: printk(KERN_ERR "Unknown MI Service Action: 0x%02x\n", (cdb[1] & 0x1f)); return -1; } break; case ACCESS_CONTROL_IN: case ACCESS_CONTROL_OUT: case INQUIRY: case LOG_SENSE: case READ_MEDIA_SERIAL_NUMBER: case REPORT_LUNS: case REQUEST_SENSE: case PERSISTENT_RESERVE_IN: ret = 0; /*/ Allowed CDBs */ break; default: other_cdb = 1; break; } /* * Case where the CDB is explicitly allowed in the above switch * statement. */ if (!(ret) && !(other_cdb)) { #if 0 printk(KERN_INFO "Allowing explict CDB: 0x%02x for %s" " reservation holder\n", cdb[0], core_scsi3_pr_dump_type(pr_reg_type)); #endif return ret; } /* * Check if write exclusive initiator ports *NOT* holding the * WRITE_EXCLUSIVE_* reservation. */ if ((we) && !(registered_nexus)) { if (cmd->data_direction == DMA_TO_DEVICE) { /* * Conflict for write exclusive */ printk(KERN_INFO "%s Conflict for unregistered nexus" " %s CDB: 0x%02x to %s reservation\n", transport_dump_cmd_direction(cmd), se_sess->se_node_acl->initiatorname, cdb[0], core_scsi3_pr_dump_type(pr_reg_type)); return 1; } else { /* * Allow non WRITE CDBs for all Write Exclusive * PR TYPEs to pass for registered and * non-registered_nexuxes NOT holding the reservation. * * We only make noise for the unregisterd nexuses, * as we expect registered non-reservation holding * nexuses to issue CDBs. */ #if 0 if (!(registered_nexus)) { printk(KERN_INFO "Allowing implict CDB: 0x%02x" " for %s reservation on unregistered" " nexus\n", cdb[0], core_scsi3_pr_dump_type(pr_reg_type)); } #endif return 0; } } else if ((reg_only) || (all_reg)) { if (registered_nexus) { /* * For PR_*_REG_ONLY and PR_*_ALL_REG reservations, * allow commands from registered nexuses. */ #if 0 printk(KERN_INFO "Allowing implict CDB: 0x%02x for %s" " reservation\n", cdb[0], core_scsi3_pr_dump_type(pr_reg_type)); #endif return 0; } } printk(KERN_INFO "%s Conflict for %sregistered nexus %s CDB: 0x%2x" " for %s reservation\n", transport_dump_cmd_direction(cmd), (registered_nexus) ? "" : "un", se_sess->se_node_acl->initiatorname, cdb[0], core_scsi3_pr_dump_type(pr_reg_type)); return 1; /* Conflict by default */ } static u32 core_scsi3_pr_generation(struct se_device *dev) { struct se_subsystem_dev *su_dev = SU_DEV(dev); u32 prg; /* * PRGeneration field shall contain the value of a 32-bit wrapping * counter mainted by the device server. * * Note that this is done regardless of Active Persist across * Target PowerLoss (APTPL) * * See spc4r17 section 6.3.12 READ_KEYS service action */ spin_lock(&dev->dev_reservation_lock); prg = T10_RES(su_dev)->pr_generation++; spin_unlock(&dev->dev_reservation_lock); return prg; } static int core_scsi3_pr_reservation_check( struct se_cmd *cmd, u32 *pr_reg_type) { struct se_device *dev = cmd->se_dev; struct se_session *sess = cmd->se_sess; int ret; if (!(sess)) return 0; /* * A legacy SPC-2 reservation is being held. */ if (dev->dev_flags & DF_SPC2_RESERVATIONS) return core_scsi2_reservation_check(cmd, pr_reg_type); spin_lock(&dev->dev_reservation_lock); if (!(dev->dev_pr_res_holder)) { spin_unlock(&dev->dev_reservation_lock); return 0; } *pr_reg_type = dev->dev_pr_res_holder->pr_res_type; cmd->pr_res_key = dev->dev_pr_res_holder->pr_res_key; if (dev->dev_pr_res_holder->pr_reg_nacl != sess->se_node_acl) { spin_unlock(&dev->dev_reservation_lock); return -1; } if (!(dev->dev_pr_res_holder->isid_present_at_reg)) { spin_unlock(&dev->dev_reservation_lock); return 0; } ret = (dev->dev_pr_res_holder->pr_reg_bin_isid == sess->sess_bin_isid) ? 0 : -1; /* * Use bit in *pr_reg_type to notify ISID mismatch in * core_scsi3_pr_seq_non_holder(). */ if (ret != 0) *pr_reg_type |= 0x80000000; spin_unlock(&dev->dev_reservation_lock); return ret; } static struct t10_pr_registration *__core_scsi3_do_alloc_registration( struct se_device *dev, struct se_node_acl *nacl, struct se_dev_entry *deve, unsigned char *isid, u64 sa_res_key, int all_tg_pt, int aptpl) { struct se_subsystem_dev *su_dev = SU_DEV(dev); struct t10_pr_registration *pr_reg; pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_ATOMIC); if (!(pr_reg)) { printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); return NULL; } pr_reg->pr_aptpl_buf = kzalloc(T10_RES(su_dev)->pr_aptpl_buf_len, GFP_ATOMIC); if (!(pr_reg->pr_aptpl_buf)) { printk(KERN_ERR "Unable to allocate pr_reg->pr_aptpl_buf\n"); kmem_cache_free(t10_pr_reg_cache, pr_reg); return NULL; } INIT_LIST_HEAD(&pr_reg->pr_reg_list); INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); atomic_set(&pr_reg->pr_res_holders, 0); pr_reg->pr_reg_nacl = nacl; pr_reg->pr_reg_deve = deve; pr_reg->pr_res_mapped_lun = deve->mapped_lun; pr_reg->pr_aptpl_target_lun = deve->se_lun->unpacked_lun; pr_reg->pr_res_key = sa_res_key; pr_reg->pr_reg_all_tg_pt = all_tg_pt; pr_reg->pr_reg_aptpl = aptpl; pr_reg->pr_reg_tg_pt_lun = deve->se_lun; /* * If an ISID value for this SCSI Initiator Port exists, * save it to the registration now. */ if (isid != NULL) { pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); pr_reg->isid_present_at_reg = 1; } return pr_reg; } static int core_scsi3_lunacl_depend_item(struct se_dev_entry *); static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *); /* * Function used for handling PR registrations for ALL_TG_PT=1 and ALL_TG_PT=0 * modes. */ static struct t10_pr_registration *__core_scsi3_alloc_registration( struct se_device *dev, struct se_node_acl *nacl, struct se_dev_entry *deve, unsigned char *isid, u64 sa_res_key, int all_tg_pt, int aptpl) { struct se_dev_entry *deve_tmp; struct se_node_acl *nacl_tmp; struct se_port *port, *port_tmp; struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; struct t10_pr_registration *pr_reg, *pr_reg_atp, *pr_reg_tmp, *pr_reg_tmp_safe; int ret; /* * Create a registration for the I_T Nexus upon which the * PROUT REGISTER was received. */ pr_reg = __core_scsi3_do_alloc_registration(dev, nacl, deve, isid, sa_res_key, all_tg_pt, aptpl); if (!(pr_reg)) return NULL; /* * Return pointer to pr_reg for ALL_TG_PT=0 */ if (!(all_tg_pt)) return pr_reg; /* * Create list of matching SCSI Initiator Port registrations * for ALL_TG_PT=1 */ spin_lock(&dev->se_port_lock); list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) { atomic_inc(&port->sep_tg_pt_ref_cnt); smp_mb__after_atomic_inc(); spin_unlock(&dev->se_port_lock); spin_lock_bh(&port->sep_alua_lock); list_for_each_entry(deve_tmp, &port->sep_alua_list, alua_port_list) { /* * This pointer will be NULL for demo mode MappedLUNs * that have not been make explict via a ConfigFS * MappedLUN group for the SCSI Initiator Node ACL. */ if (!(deve_tmp->se_lun_acl)) continue; nacl_tmp = deve_tmp->se_lun_acl->se_lun_nacl; /* * Skip the matching struct se_node_acl that is allocated * above.. */ if (nacl == nacl_tmp) continue; /* * Only perform PR registrations for target ports on * the same fabric module as the REGISTER w/ ALL_TG_PT=1 * arrived. */ if (tfo != nacl_tmp->se_tpg->se_tpg_tfo) continue; /* * Look for a matching Initiator Node ACL in ASCII format */ if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname)) continue; atomic_inc(&deve_tmp->pr_ref_count); smp_mb__after_atomic_inc(); spin_unlock_bh(&port->sep_alua_lock); /* * Grab a configfs group dependency that is released * for the exception path at label out: below, or upon * completion of adding ALL_TG_PT=1 registrations in * __core_scsi3_add_registration() */ ret = core_scsi3_lunacl_depend_item(deve_tmp); if (ret < 0) { printk(KERN_ERR "core_scsi3_lunacl_depend" "_item() failed\n"); atomic_dec(&port->sep_tg_pt_ref_cnt); smp_mb__after_atomic_dec(); atomic_dec(&deve_tmp->pr_ref_count); smp_mb__after_atomic_dec(); goto out; } /* * Located a matching SCSI Initiator Port on a different * port, allocate the pr_reg_atp and attach it to the * pr_reg->pr_reg_atp_list that will be processed once * the original *pr_reg is processed in * __core_scsi3_add_registration() */ pr_reg_atp = __core_scsi3_do_alloc_registration(dev, nacl_tmp, deve_tmp, NULL, sa_res_key, all_tg_pt, aptpl); if (!(pr_reg_atp)) { atomic_dec(&port->sep_tg_pt_ref_cnt); smp_mb__after_atomic_dec(); atomic_dec(&deve_tmp->pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_lunacl_undepend_item(deve_tmp); goto out; } list_add_tail(&pr_reg_atp->pr_reg_atp_mem_list, &pr_reg->pr_reg_atp_list); spin_lock_bh(&port->sep_alua_lock); } spin_unlock_bh(&port->sep_alua_lock); spin_lock(&dev->se_port_lock); atomic_dec(&port->sep_tg_pt_ref_cnt); smp_mb__after_atomic_dec(); } spin_unlock(&dev->se_port_lock); return pr_reg; out: list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { list_del(&pr_reg_tmp->pr_reg_atp_mem_list); core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); } kmem_cache_free(t10_pr_reg_cache, pr_reg); return NULL; } int core_scsi3_alloc_aptpl_registration( struct t10_reservation_template *pr_tmpl, u64 sa_res_key, unsigned char *i_port, unsigned char *isid, u32 mapped_lun, unsigned char *t_port, u16 tpgt, u32 target_lun, int res_holder, int all_tg_pt, u8 type) { struct t10_pr_registration *pr_reg; if (!(i_port) || !(t_port) || !(sa_res_key)) { printk(KERN_ERR "Illegal parameters for APTPL registration\n"); return -1; } pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_KERNEL); if (!(pr_reg)) { printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); return -1; } pr_reg->pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL); INIT_LIST_HEAD(&pr_reg->pr_reg_list); INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); atomic_set(&pr_reg->pr_res_holders, 0); pr_reg->pr_reg_nacl = NULL; pr_reg->pr_reg_deve = NULL; pr_reg->pr_res_mapped_lun = mapped_lun; pr_reg->pr_aptpl_target_lun = target_lun; pr_reg->pr_res_key = sa_res_key; pr_reg->pr_reg_all_tg_pt = all_tg_pt; pr_reg->pr_reg_aptpl = 1; pr_reg->pr_reg_tg_pt_lun = NULL; pr_reg->pr_res_scope = 0; /* Always LUN_SCOPE */ pr_reg->pr_res_type = type; /* * If an ISID value had been saved in APTPL metadata for this * SCSI Initiator Port, restore it now. */ if (isid != NULL) { pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); pr_reg->isid_present_at_reg = 1; } /* * Copy the i_port and t_port information from caller. */ snprintf(pr_reg->pr_iport, PR_APTPL_MAX_IPORT_LEN, "%s", i_port); snprintf(pr_reg->pr_tport, PR_APTPL_MAX_TPORT_LEN, "%s", t_port); pr_reg->pr_reg_tpgt = tpgt; /* * Set pr_res_holder from caller, the pr_reg who is the reservation * holder will get it's pointer set in core_scsi3_aptpl_reserve() once * the Initiator Node LUN ACL from the fabric module is created for * this registration. */ pr_reg->pr_res_holder = res_holder; list_add_tail(&pr_reg->pr_reg_aptpl_list, &pr_tmpl->aptpl_reg_list); printk(KERN_INFO "SPC-3 PR APTPL Successfully added registration%s from" " metadata\n", (res_holder) ? "+reservation" : ""); return 0; } static void core_scsi3_aptpl_reserve( struct se_device *dev, struct se_portal_group *tpg, struct se_node_acl *node_acl, struct t10_pr_registration *pr_reg) { char i_buf[PR_REG_ISID_ID_LEN]; int prf_isid; memset(i_buf, 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); spin_lock(&dev->dev_reservation_lock); dev->dev_pr_res_holder = pr_reg; spin_unlock(&dev->dev_reservation_lock); printk(KERN_INFO "SPC-3 PR [%s] Service Action: APTPL RESERVE created" " new reservation holder TYPE: %s ALL_TG_PT: %d\n", TPG_TFO(tpg)->get_fabric_name(), core_scsi3_pr_dump_type(pr_reg->pr_res_type), (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", TPG_TFO(tpg)->get_fabric_name(), node_acl->initiatorname, (prf_isid) ? &i_buf[0] : ""); } static void __core_scsi3_add_registration(struct se_device *, struct se_node_acl *, struct t10_pr_registration *, int, int); static int __core_scsi3_check_aptpl_registration( struct se_device *dev, struct se_portal_group *tpg, struct se_lun *lun, u32 target_lun, struct se_node_acl *nacl, struct se_dev_entry *deve) { struct t10_pr_registration *pr_reg, *pr_reg_tmp; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; unsigned char i_port[PR_APTPL_MAX_IPORT_LEN]; unsigned char t_port[PR_APTPL_MAX_TPORT_LEN]; u16 tpgt; memset(i_port, 0, PR_APTPL_MAX_IPORT_LEN); memset(t_port, 0, PR_APTPL_MAX_TPORT_LEN); /* * Copy Initiator Port information from struct se_node_acl */ snprintf(i_port, PR_APTPL_MAX_IPORT_LEN, "%s", nacl->initiatorname); snprintf(t_port, PR_APTPL_MAX_TPORT_LEN, "%s", TPG_TFO(tpg)->tpg_get_wwn(tpg)); tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg); /* * Look for the matching registrations+reservation from those * created from APTPL metadata. Note that multiple registrations * may exist for fabrics that use ISIDs in their SCSI Initiator Port * TransportIDs. */ spin_lock(&pr_tmpl->aptpl_reg_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, pr_reg_aptpl_list) { if (!(strcmp(pr_reg->pr_iport, i_port)) && (pr_reg->pr_res_mapped_lun == deve->mapped_lun) && !(strcmp(pr_reg->pr_tport, t_port)) && (pr_reg->pr_reg_tpgt == tpgt) && (pr_reg->pr_aptpl_target_lun == target_lun)) { pr_reg->pr_reg_nacl = nacl; pr_reg->pr_reg_deve = deve; pr_reg->pr_reg_tg_pt_lun = lun; list_del(&pr_reg->pr_reg_aptpl_list); spin_unlock(&pr_tmpl->aptpl_reg_lock); /* * At this point all of the pointers in *pr_reg will * be setup, so go ahead and add the registration. */ __core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0); /* * If this registration is the reservation holder, * make that happen now.. */ if (pr_reg->pr_res_holder) core_scsi3_aptpl_reserve(dev, tpg, nacl, pr_reg); /* * Reenable pr_aptpl_active to accept new metadata * updates once the SCSI device is active again.. */ spin_lock(&pr_tmpl->aptpl_reg_lock); pr_tmpl->pr_aptpl_active = 1; } } spin_unlock(&pr_tmpl->aptpl_reg_lock); return 0; } int core_scsi3_check_aptpl_registration( struct se_device *dev, struct se_portal_group *tpg, struct se_lun *lun, struct se_lun_acl *lun_acl) { struct se_subsystem_dev *su_dev = SU_DEV(dev); struct se_node_acl *nacl = lun_acl->se_lun_nacl; struct se_dev_entry *deve = &nacl->device_list[lun_acl->mapped_lun]; if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) return 0; return __core_scsi3_check_aptpl_registration(dev, tpg, lun, lun->unpacked_lun, nacl, deve); } static void __core_scsi3_dump_registration( struct target_core_fabric_ops *tfo, struct se_device *dev, struct se_node_acl *nacl, struct t10_pr_registration *pr_reg, int register_type) { struct se_portal_group *se_tpg = nacl->se_tpg; char i_buf[PR_REG_ISID_ID_LEN]; int prf_isid; memset(&i_buf[0], 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER%s Initiator" " Node: %s%s\n", tfo->get_fabric_name(), (register_type == 2) ? "_AND_MOVE" : (register_type == 1) ? "_AND_IGNORE_EXISTING_KEY" : "", nacl->initiatorname, (prf_isid) ? i_buf : ""); printk(KERN_INFO "SPC-3 PR [%s] registration on Target Port: %s,0x%04x\n", tfo->get_fabric_name(), tfo->tpg_get_wwn(se_tpg), tfo->tpg_get_tag(se_tpg)); printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" " Port(s)\n", tfo->get_fabric_name(), (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", TRANSPORT(dev)->name); printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" " 0x%08x APTPL: %d\n", tfo->get_fabric_name(), pr_reg->pr_res_key, pr_reg->pr_res_generation, pr_reg->pr_reg_aptpl); } /* * this function can be called with struct se_device->dev_reservation_lock * when register_move = 1 */ static void __core_scsi3_add_registration( struct se_device *dev, struct se_node_acl *nacl, struct t10_pr_registration *pr_reg, int register_type, int register_move) { struct se_subsystem_dev *su_dev = SU_DEV(dev); struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; /* * Increment PRgeneration counter for struct se_device upon a successful * REGISTER, see spc4r17 section 6.3.2 READ_KEYS service action * * Also, when register_move = 1 for PROUT REGISTER_AND_MOVE service * action, the struct se_device->dev_reservation_lock will already be held, * so we do not call core_scsi3_pr_generation() which grabs the lock * for the REGISTER. */ pr_reg->pr_res_generation = (register_move) ? T10_RES(su_dev)->pr_generation++ : core_scsi3_pr_generation(dev); spin_lock(&pr_tmpl->registration_lock); list_add_tail(&pr_reg->pr_reg_list, &pr_tmpl->registration_list); pr_reg->pr_reg_deve->def_pr_registered = 1; __core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type); spin_unlock(&pr_tmpl->registration_lock); /* * Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE. */ if (!(pr_reg->pr_reg_all_tg_pt) || (register_move)) return; /* * Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1 * allocated in __core_scsi3_alloc_registration() */ list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { list_del(&pr_reg_tmp->pr_reg_atp_mem_list); pr_reg_tmp->pr_res_generation = core_scsi3_pr_generation(dev); spin_lock(&pr_tmpl->registration_lock); list_add_tail(&pr_reg_tmp->pr_reg_list, &pr_tmpl->registration_list); pr_reg_tmp->pr_reg_deve->def_pr_registered = 1; __core_scsi3_dump_registration(tfo, dev, pr_reg_tmp->pr_reg_nacl, pr_reg_tmp, register_type); spin_unlock(&pr_tmpl->registration_lock); /* * Drop configfs group dependency reference from * __core_scsi3_alloc_registration() */ core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); } } static int core_scsi3_alloc_registration( struct se_device *dev, struct se_node_acl *nacl, struct se_dev_entry *deve, unsigned char *isid, u64 sa_res_key, int all_tg_pt, int aptpl, int register_type, int register_move) { struct t10_pr_registration *pr_reg; pr_reg = __core_scsi3_alloc_registration(dev, nacl, deve, isid, sa_res_key, all_tg_pt, aptpl); if (!(pr_reg)) return -1; __core_scsi3_add_registration(dev, nacl, pr_reg, register_type, register_move); return 0; } static struct t10_pr_registration *__core_scsi3_locate_pr_reg( struct se_device *dev, struct se_node_acl *nacl, unsigned char *isid) { struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; struct t10_pr_registration *pr_reg, *pr_reg_tmp; struct se_portal_group *tpg; spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { /* * First look for a matching struct se_node_acl */ if (pr_reg->pr_reg_nacl != nacl) continue; tpg = pr_reg->pr_reg_nacl->se_tpg; /* * If this registration does NOT contain a fabric provided * ISID, then we have found a match. */ if (!(pr_reg->isid_present_at_reg)) { /* * Determine if this SCSI device server requires that * SCSI Intiatior TransportID w/ ISIDs is enforced * for fabric modules (iSCSI) requiring them. */ if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { if (DEV_ATTRIB(dev)->enforce_pr_isids) continue; } atomic_inc(&pr_reg->pr_res_holders); smp_mb__after_atomic_inc(); spin_unlock(&pr_tmpl->registration_lock); return pr_reg; } /* * If the *pr_reg contains a fabric defined ISID for multi-value * SCSI Initiator Port TransportIDs, then we expect a valid * matching ISID to be provided by the local SCSI Initiator Port. */ if (!(isid)) continue; if (strcmp(isid, pr_reg->pr_reg_isid)) continue; atomic_inc(&pr_reg->pr_res_holders); smp_mb__after_atomic_inc(); spin_unlock(&pr_tmpl->registration_lock); return pr_reg; } spin_unlock(&pr_tmpl->registration_lock); return NULL; } static struct t10_pr_registration *core_scsi3_locate_pr_reg( struct se_device *dev, struct se_node_acl *nacl, struct se_session *sess) { struct se_portal_group *tpg = nacl->se_tpg; unsigned char buf[PR_REG_ISID_LEN], *isid_ptr = NULL; if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { memset(&buf[0], 0, PR_REG_ISID_LEN); TPG_TFO(tpg)->sess_get_initiator_sid(sess, &buf[0], PR_REG_ISID_LEN); isid_ptr = &buf[0]; } return __core_scsi3_locate_pr_reg(dev, nacl, isid_ptr); } static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg) { atomic_dec(&pr_reg->pr_res_holders); smp_mb__after_atomic_dec(); } static int core_scsi3_check_implict_release( struct se_device *dev, struct t10_pr_registration *pr_reg) { struct se_node_acl *nacl = pr_reg->pr_reg_nacl; struct t10_pr_registration *pr_res_holder; int ret = 0; spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (!(pr_res_holder)) { spin_unlock(&dev->dev_reservation_lock); return ret; } if (pr_res_holder == pr_reg) { /* * Perform an implict RELEASE if the registration that * is being released is holding the reservation. * * From spc4r17, section 5.7.11.1: * * e) If the I_T nexus is the persistent reservation holder * and the persistent reservation is not an all registrants * type, then a PERSISTENT RESERVE OUT command with REGISTER * service action or REGISTER AND IGNORE EXISTING KEY * service action with the SERVICE ACTION RESERVATION KEY * field set to zero (see 5.7.11.3). */ __core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0); ret = 1; /* * For 'All Registrants' reservation types, all existing * registrations are still processed as reservation holders * in core_scsi3_pr_seq_non_holder() after the initial * reservation holder is implictly released here. */ } else if (pr_reg->pr_reg_all_tg_pt && (!strcmp(pr_res_holder->pr_reg_nacl->initiatorname, pr_reg->pr_reg_nacl->initiatorname)) && (pr_res_holder->pr_res_key == pr_reg->pr_res_key)) { printk(KERN_ERR "SPC-3 PR: Unable to perform ALL_TG_PT=1" " UNREGISTER while existing reservation with matching" " key 0x%016Lx is present from another SCSI Initiator" " Port\n", pr_reg->pr_res_key); ret = -1; } spin_unlock(&dev->dev_reservation_lock); return ret; } /* * Called with struct t10_reservation_template->registration_lock held. */ static void __core_scsi3_free_registration( struct se_device *dev, struct t10_pr_registration *pr_reg, struct list_head *preempt_and_abort_list, int dec_holders) { struct target_core_fabric_ops *tfo = pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; char i_buf[PR_REG_ISID_ID_LEN]; int prf_isid; memset(i_buf, 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); pr_reg->pr_reg_deve->def_pr_registered = 0; pr_reg->pr_reg_deve->pr_res_key = 0; list_del(&pr_reg->pr_reg_list); /* * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(), * so call core_scsi3_put_pr_reg() to decrement our reference. */ if (dec_holders) core_scsi3_put_pr_reg(pr_reg); /* * Wait until all reference from any other I_T nexuses for this * *pr_reg have been released. Because list_del() is called above, * the last core_scsi3_put_pr_reg(pr_reg) will release this reference * count back to zero, and we release *pr_reg. */ while (atomic_read(&pr_reg->pr_res_holders) != 0) { spin_unlock(&pr_tmpl->registration_lock); printk("SPC-3 PR [%s] waiting for pr_res_holders\n", tfo->get_fabric_name()); cpu_relax(); spin_lock(&pr_tmpl->registration_lock); } printk(KERN_INFO "SPC-3 PR [%s] Service Action: UNREGISTER Initiator" " Node: %s%s\n", tfo->get_fabric_name(), pr_reg->pr_reg_nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" " Port(s)\n", tfo->get_fabric_name(), (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", TRANSPORT(dev)->name); printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" " 0x%08x\n", tfo->get_fabric_name(), pr_reg->pr_res_key, pr_reg->pr_res_generation); if (!(preempt_and_abort_list)) { pr_reg->pr_reg_deve = NULL; pr_reg->pr_reg_nacl = NULL; kfree(pr_reg->pr_aptpl_buf); kmem_cache_free(t10_pr_reg_cache, pr_reg); return; } /* * For PREEMPT_AND_ABORT, the list of *pr_reg in preempt_and_abort_list * are released once the ABORT_TASK_SET has completed.. */ list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list); } void core_scsi3_free_pr_reg_from_nacl( struct se_device *dev, struct se_node_acl *nacl) { struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; /* * If the passed se_node_acl matches the reservation holder, * release the reservation. */ spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if ((pr_res_holder != NULL) && (pr_res_holder->pr_reg_nacl == nacl)) __core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0); spin_unlock(&dev->dev_reservation_lock); /* * Release any registration associated with the struct se_node_acl. */ spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { if (pr_reg->pr_reg_nacl != nacl) continue; __core_scsi3_free_registration(dev, pr_reg, NULL, 0); } spin_unlock(&pr_tmpl->registration_lock); } void core_scsi3_free_all_registrations( struct se_device *dev) { struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (pr_res_holder != NULL) { struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; __core_scsi3_complete_pro_release(dev, pr_res_nacl, pr_res_holder, 0); } spin_unlock(&dev->dev_reservation_lock); spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { __core_scsi3_free_registration(dev, pr_reg, NULL, 0); } spin_unlock(&pr_tmpl->registration_lock); spin_lock(&pr_tmpl->aptpl_reg_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, pr_reg_aptpl_list) { list_del(&pr_reg->pr_reg_aptpl_list); kfree(pr_reg->pr_aptpl_buf); kmem_cache_free(t10_pr_reg_cache, pr_reg); } spin_unlock(&pr_tmpl->aptpl_reg_lock); } static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg) { return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, &tpg->tpg_group.cg_item); } static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg) { configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, &tpg->tpg_group.cg_item); atomic_dec(&tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); } static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl) { struct se_portal_group *tpg = nacl->se_tpg; if (nacl->dynamic_node_acl) return 0; return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, &nacl->acl_group.cg_item); } static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl) { struct se_portal_group *tpg = nacl->se_tpg; if (nacl->dynamic_node_acl) { atomic_dec(&nacl->acl_pr_ref_count); smp_mb__after_atomic_dec(); return; } configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, &nacl->acl_group.cg_item); atomic_dec(&nacl->acl_pr_ref_count); smp_mb__after_atomic_dec(); } static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve) { struct se_lun_acl *lun_acl = se_deve->se_lun_acl; struct se_node_acl *nacl; struct se_portal_group *tpg; /* * For nacl->dynamic_node_acl=1 */ if (!(lun_acl)) return 0; nacl = lun_acl->se_lun_nacl; tpg = nacl->se_tpg; return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, &lun_acl->se_lun_group.cg_item); } static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve) { struct se_lun_acl *lun_acl = se_deve->se_lun_acl; struct se_node_acl *nacl; struct se_portal_group *tpg; /* * For nacl->dynamic_node_acl=1 */ if (!(lun_acl)) { atomic_dec(&se_deve->pr_ref_count); smp_mb__after_atomic_dec(); return; } nacl = lun_acl->se_lun_nacl; tpg = nacl->se_tpg; configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, &lun_acl->se_lun_group.cg_item); atomic_dec(&se_deve->pr_ref_count); smp_mb__after_atomic_dec(); } static int core_scsi3_decode_spec_i_port( struct se_cmd *cmd, struct se_portal_group *tpg, unsigned char *l_isid, u64 sa_res_key, int all_tg_pt, int aptpl) { struct se_device *dev = SE_DEV(cmd); struct se_port *tmp_port; struct se_portal_group *dest_tpg = NULL, *tmp_tpg; struct se_session *se_sess = SE_SESS(cmd); struct se_node_acl *dest_node_acl = NULL; struct se_dev_entry *dest_se_deve = NULL, *local_se_deve; struct t10_pr_registration *dest_pr_reg, *local_pr_reg, *pr_reg_e; struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; struct list_head tid_dest_list; struct pr_transport_id_holder *tidh_new, *tidh, *tidh_tmp; struct target_core_fabric_ops *tmp_tf_ops; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; unsigned char *ptr, *i_str = NULL, proto_ident, tmp_proto_ident; char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; u32 tpdl, tid_len = 0; int ret, dest_local_nexus, prf_isid; u32 dest_rtpi = 0; memset(dest_iport, 0, 64); INIT_LIST_HEAD(&tid_dest_list); local_se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; /* * Allocate a struct pr_transport_id_holder and setup the * local_node_acl and local_se_deve pointers and add to * struct list_head tid_dest_list for add registration * processing in the loop of tid_dest_list below. */ tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); if (!(tidh_new)) { printk(KERN_ERR "Unable to allocate tidh_new\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } INIT_LIST_HEAD(&tidh_new->dest_list); tidh_new->dest_tpg = tpg; tidh_new->dest_node_acl = se_sess->se_node_acl; tidh_new->dest_se_deve = local_se_deve; local_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), se_sess->se_node_acl, local_se_deve, l_isid, sa_res_key, all_tg_pt, aptpl); if (!(local_pr_reg)) { kfree(tidh_new); return PYX_TRANSPORT_LU_COMM_FAILURE; } tidh_new->dest_pr_reg = local_pr_reg; /* * The local I_T nexus does not hold any configfs dependances, * so we set tid_h->dest_local_nexus=1 to prevent the * configfs_undepend_item() calls in the tid_dest_list loops below. */ tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, * first extract TransportID Parameter Data Length, and make sure * the value matches up to the SCSI expected data transfer length. */ tpdl = (buf[24] & 0xff) << 24; tpdl |= (buf[25] & 0xff) << 16; tpdl |= (buf[26] & 0xff) << 8; tpdl |= buf[27] & 0xff; if ((tpdl + 28) != cmd->data_length) { printk(KERN_ERR "SPC-3 PR: Illegal tpdl: %u + 28 byte header" " does not equal CDB data_length: %u\n", tpdl, cmd->data_length); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } /* * Start processing the received transport IDs using the * receiving I_T Nexus portal's fabric dependent methods to * obtain the SCSI Initiator Port/Device Identifiers. */ ptr = &buf[28]; while (tpdl > 0) { proto_ident = (ptr[0] & 0x0f); dest_tpg = NULL; spin_lock(&dev->se_port_lock); list_for_each_entry(tmp_port, &dev->dev_sep_list, sep_list) { tmp_tpg = tmp_port->sep_tpg; if (!(tmp_tpg)) continue; tmp_tf_ops = TPG_TFO(tmp_tpg); if (!(tmp_tf_ops)) continue; if (!(tmp_tf_ops->get_fabric_proto_ident) || !(tmp_tf_ops->tpg_parse_pr_out_transport_id)) continue; /* * Look for the matching proto_ident provided by * the received TransportID */ tmp_proto_ident = tmp_tf_ops->get_fabric_proto_ident(tmp_tpg); if (tmp_proto_ident != proto_ident) continue; dest_rtpi = tmp_port->sep_rtpi; i_str = tmp_tf_ops->tpg_parse_pr_out_transport_id( tmp_tpg, (const char *)ptr, &tid_len, &iport_ptr); if (!(i_str)) continue; atomic_inc(&tmp_tpg->tpg_pr_ref_count); smp_mb__after_atomic_inc(); spin_unlock(&dev->se_port_lock); ret = core_scsi3_tpg_depend_item(tmp_tpg); if (ret != 0) { printk(KERN_ERR " core_scsi3_tpg_depend_item()" " for tmp_tpg\n"); atomic_dec(&tmp_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } /* * Locate the desination initiator ACL to be registered * from the decoded fabric module specific TransportID * at *i_str. */ spin_lock_bh(&tmp_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl( tmp_tpg, i_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } spin_unlock_bh(&tmp_tpg->acl_node_lock); if (!(dest_node_acl)) { core_scsi3_tpg_undepend_item(tmp_tpg); spin_lock(&dev->se_port_lock); continue; } ret = core_scsi3_nodeacl_depend_item(dest_node_acl); if (ret != 0) { printk(KERN_ERR "configfs_depend_item() failed" " for dest_node_acl->acl_group\n"); atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_tpg_undepend_item(tmp_tpg); ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } dest_tpg = tmp_tpg; printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node:" " %s Port RTPI: %hu\n", TPG_TFO(dest_tpg)->get_fabric_name(), dest_node_acl->initiatorname, dest_rtpi); spin_lock(&dev->se_port_lock); break; } spin_unlock(&dev->se_port_lock); if (!(dest_tpg)) { printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Unable to locate" " dest_tpg\n"); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } #if 0 printk("SPC-3 PR SPEC_I_PT: Got %s data_length: %u tpdl: %u" " tid_len: %d for %s + %s\n", TPG_TFO(dest_tpg)->get_fabric_name(), cmd->data_length, tpdl, tid_len, i_str, iport_ptr); #endif if (tid_len > tpdl) { printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Illegal tid_len:" " %u for Transport ID: %s\n", tid_len, ptr); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } /* * Locate the desintation struct se_dev_entry pointer for matching * RELATIVE TARGET PORT IDENTIFIER on the receiving I_T Nexus * Target Port. */ dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, dest_rtpi); if (!(dest_se_deve)) { printk(KERN_ERR "Unable to locate %s dest_se_deve" " from destination RTPI: %hu\n", TPG_TFO(dest_tpg)->get_fabric_name(), dest_rtpi); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } ret = core_scsi3_lunacl_depend_item(dest_se_deve); if (ret < 0) { printk(KERN_ERR "core_scsi3_lunacl_depend_item()" " failed\n"); atomic_dec(&dest_se_deve->pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } #if 0 printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node: %s" " dest_se_deve mapped_lun: %u\n", TPG_TFO(dest_tpg)->get_fabric_name(), dest_node_acl->initiatorname, dest_se_deve->mapped_lun); #endif /* * Skip any TransportIDs that already have a registration for * this target port. */ pr_reg_e = __core_scsi3_locate_pr_reg(dev, dest_node_acl, iport_ptr); if (pr_reg_e) { core_scsi3_put_pr_reg(pr_reg_e); core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); ptr += tid_len; tpdl -= tid_len; tid_len = 0; continue; } /* * Allocate a struct pr_transport_id_holder and setup * the dest_node_acl and dest_se_deve pointers for the * loop below. */ tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); if (!(tidh_new)) { printk(KERN_ERR "Unable to allocate tidh_new\n"); core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } INIT_LIST_HEAD(&tidh_new->dest_list); tidh_new->dest_tpg = dest_tpg; tidh_new->dest_node_acl = dest_node_acl; tidh_new->dest_se_deve = dest_se_deve; /* * Allocate, but do NOT add the registration for the * TransportID referenced SCSI Initiator port. This * done because of the following from spc4r17 in section * 6.14.3 wrt SPEC_I_PT: * * "If a registration fails for any initiator port (e.g., if th * logical unit does not have enough resources available to * hold the registration information), no registrations shall be * made, and the command shall be terminated with * CHECK CONDITION status." * * That means we call __core_scsi3_alloc_registration() here, * and then call __core_scsi3_add_registration() in the * 2nd loop which will never fail. */ dest_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), dest_node_acl, dest_se_deve, iport_ptr, sa_res_key, all_tg_pt, aptpl); if (!(dest_pr_reg)) { core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); kfree(tidh_new); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } tidh_new->dest_pr_reg = dest_pr_reg; list_add_tail(&tidh_new->dest_list, &tid_dest_list); ptr += tid_len; tpdl -= tid_len; tid_len = 0; } /* * Go ahead and create a registrations from tid_dest_list for the * SPEC_I_PT provided TransportID for the *tidh referenced dest_node_acl * and dest_se_deve. * * The SA Reservation Key from the PROUT is set for the * registration, and ALL_TG_PT is also passed. ALL_TG_PT=1 * means that the TransportID Initiator port will be * registered on all of the target ports in the SCSI target device * ALL_TG_PT=0 means the registration will only be for the * SCSI target port the PROUT REGISTER with SPEC_I_PT=1 * was received. */ list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { dest_tpg = tidh->dest_tpg; dest_node_acl = tidh->dest_node_acl; dest_se_deve = tidh->dest_se_deve; dest_pr_reg = tidh->dest_pr_reg; dest_local_nexus = tidh->dest_local_nexus; list_del(&tidh->dest_list); kfree(tidh); memset(i_buf, 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(dest_pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); __core_scsi3_add_registration(SE_DEV(cmd), dest_node_acl, dest_pr_reg, 0, 0); printk(KERN_INFO "SPC-3 PR [%s] SPEC_I_PT: Successfully" " registered Transport ID for Node: %s%s Mapped LUN:" " %u\n", TPG_TFO(dest_tpg)->get_fabric_name(), dest_node_acl->initiatorname, (prf_isid) ? &i_buf[0] : "", dest_se_deve->mapped_lun); if (dest_local_nexus) continue; core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); } return 0; out: /* * For the failure case, release everything from tid_dest_list * including *dest_pr_reg and the configfs dependances.. */ list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { dest_tpg = tidh->dest_tpg; dest_node_acl = tidh->dest_node_acl; dest_se_deve = tidh->dest_se_deve; dest_pr_reg = tidh->dest_pr_reg; dest_local_nexus = tidh->dest_local_nexus; list_del(&tidh->dest_list); kfree(tidh); /* * Release any extra ALL_TG_PT=1 registrations for * the SPEC_I_PT=1 case. */ list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, &dest_pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { list_del(&pr_reg_tmp->pr_reg_atp_mem_list); core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); } kfree(dest_pr_reg->pr_aptpl_buf); kmem_cache_free(t10_pr_reg_cache, dest_pr_reg); if (dest_local_nexus) continue; core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); } return ret; } /* * Called with struct se_device->dev_reservation_lock held */ static int __core_scsi3_update_aptpl_buf( struct se_device *dev, unsigned char *buf, u32 pr_aptpl_buf_len, int clear_aptpl_metadata) { struct se_lun *lun; struct se_portal_group *tpg; struct se_subsystem_dev *su_dev = SU_DEV(dev); struct t10_pr_registration *pr_reg; unsigned char tmp[512], isid_buf[32]; ssize_t len = 0; int reg_count = 0; memset(buf, 0, pr_aptpl_buf_len); /* * Called to clear metadata once APTPL has been deactivated. */ if (clear_aptpl_metadata) { snprintf(buf, pr_aptpl_buf_len, "No Registrations or Reservations\n"); return 0; } /* * Walk the registration list.. */ spin_lock(&T10_RES(su_dev)->registration_lock); list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, pr_reg_list) { tmp[0] = '\0'; isid_buf[0] = '\0'; tpg = pr_reg->pr_reg_nacl->se_tpg; lun = pr_reg->pr_reg_tg_pt_lun; /* * Write out any ISID value to APTPL metadata that was included * in the original registration. */ if (pr_reg->isid_present_at_reg) snprintf(isid_buf, 32, "initiator_sid=%s\n", pr_reg->pr_reg_isid); /* * Include special metadata if the pr_reg matches the * reservation holder. */ if (dev->dev_pr_res_holder == pr_reg) { snprintf(tmp, 512, "PR_REG_START: %d" "\ninitiator_fabric=%s\n" "initiator_node=%s\n%s" "sa_res_key=%llu\n" "res_holder=1\nres_type=%02x\n" "res_scope=%02x\nres_all_tg_pt=%d\n" "mapped_lun=%u\n", reg_count, TPG_TFO(tpg)->get_fabric_name(), pr_reg->pr_reg_nacl->initiatorname, isid_buf, pr_reg->pr_res_key, pr_reg->pr_res_type, pr_reg->pr_res_scope, pr_reg->pr_reg_all_tg_pt, pr_reg->pr_res_mapped_lun); } else { snprintf(tmp, 512, "PR_REG_START: %d\n" "initiator_fabric=%s\ninitiator_node=%s\n%s" "sa_res_key=%llu\nres_holder=0\n" "res_all_tg_pt=%d\nmapped_lun=%u\n", reg_count, TPG_TFO(tpg)->get_fabric_name(), pr_reg->pr_reg_nacl->initiatorname, isid_buf, pr_reg->pr_res_key, pr_reg->pr_reg_all_tg_pt, pr_reg->pr_res_mapped_lun); } if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); return -1; } len += sprintf(buf+len, "%s", tmp); /* * Include information about the associated SCSI target port. */ snprintf(tmp, 512, "target_fabric=%s\ntarget_node=%s\n" "tpgt=%hu\nport_rtpi=%hu\ntarget_lun=%u\nPR_REG_END:" " %d\n", TPG_TFO(tpg)->get_fabric_name(), TPG_TFO(tpg)->tpg_get_wwn(tpg), TPG_TFO(tpg)->tpg_get_tag(tpg), lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); return -1; } len += sprintf(buf+len, "%s", tmp); reg_count++; } spin_unlock(&T10_RES(su_dev)->registration_lock); if (!(reg_count)) len += sprintf(buf+len, "No Registrations or Reservations"); return 0; } static int core_scsi3_update_aptpl_buf( struct se_device *dev, unsigned char *buf, u32 pr_aptpl_buf_len, int clear_aptpl_metadata) { int ret; spin_lock(&dev->dev_reservation_lock); ret = __core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, clear_aptpl_metadata); spin_unlock(&dev->dev_reservation_lock); return ret; } /* * Called with struct se_device->aptpl_file_mutex held */ static int __core_scsi3_write_aptpl_to_file( struct se_device *dev, unsigned char *buf, u32 pr_aptpl_buf_len) { struct t10_wwn *wwn = &SU_DEV(dev)->t10_wwn; struct file *file; struct iovec iov[1]; mm_segment_t old_fs; int flags = O_RDWR | O_CREAT | O_TRUNC; char path[512]; int ret; memset(iov, 0, sizeof(struct iovec)); memset(path, 0, 512); if (strlen(&wwn->unit_serial[0]) >= 512) { printk(KERN_ERR "WWN value for struct se_device does not fit" " into path buffer\n"); return -1; } snprintf(path, 512, "/var/target/pr/aptpl_%s", &wwn->unit_serial[0]); file = filp_open(path, flags, 0600); if (IS_ERR(file) || !file || !file->f_dentry) { printk(KERN_ERR "filp_open(%s) for APTPL metadata" " failed\n", path); return -1; } iov[0].iov_base = &buf[0]; if (!(pr_aptpl_buf_len)) iov[0].iov_len = (strlen(&buf[0]) + 1); /* Add extra for NULL */ else iov[0].iov_len = pr_aptpl_buf_len; old_fs = get_fs(); set_fs(get_ds()); ret = vfs_writev(file, &iov[0], 1, &file->f_pos); set_fs(old_fs); if (ret < 0) { printk("Error writing APTPL metadata file: %s\n", path); filp_close(file, NULL); return -1; } filp_close(file, NULL); return 0; } static int core_scsi3_update_and_write_aptpl( struct se_device *dev, unsigned char *in_buf, u32 in_pr_aptpl_buf_len) { unsigned char null_buf[64], *buf; u32 pr_aptpl_buf_len; int ret, clear_aptpl_metadata = 0; /* * Can be called with a NULL pointer from PROUT service action CLEAR */ if (!(in_buf)) { memset(null_buf, 0, 64); buf = &null_buf[0]; /* * This will clear the APTPL metadata to: * "No Registrations or Reservations" status */ pr_aptpl_buf_len = 64; clear_aptpl_metadata = 1; } else { buf = in_buf; pr_aptpl_buf_len = in_pr_aptpl_buf_len; } ret = core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, clear_aptpl_metadata); if (ret != 0) return -1; /* * __core_scsi3_write_aptpl_to_file() will call strlen() * on the passed buf to determine pr_aptpl_buf_len. */ ret = __core_scsi3_write_aptpl_to_file(dev, buf, 0); if (ret != 0) return -1; return ret; } static int core_scsi3_emulate_pro_register( struct se_cmd *cmd, u64 res_key, u64 sa_res_key, int aptpl, int all_tg_pt, int spec_i_pt, int ignore_key) { struct se_session *se_sess = SE_SESS(cmd); struct se_device *dev = SE_DEV(cmd); struct se_dev_entry *se_deve; struct se_lun *se_lun = SE_LUN(cmd); struct se_portal_group *se_tpg; struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; /* Used for APTPL metadata w/ UNREGISTER */ unsigned char *pr_aptpl_buf = NULL; unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL; int pr_holder = 0, ret = 0, type; if (!(se_sess) || !(se_lun)) { printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) { memset(&isid_buf[0], 0, PR_REG_ISID_LEN); TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, &isid_buf[0], PR_REG_ISID_LEN); isid_ptr = &isid_buf[0]; } /* * Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47 */ pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); if (!(pr_reg_e)) { if (res_key) { printk(KERN_WARNING "SPC-3 PR: Reservation Key non-zero" " for SA REGISTER, returning CONFLICT\n"); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * Do nothing but return GOOD status. */ if (!(sa_res_key)) return PYX_TRANSPORT_SENT_TO_TRANSPORT; if (!(spec_i_pt)) { /* * Perform the Service Action REGISTER on the Initiator * Port Endpoint that the PRO was received from on the * Logical Unit of the SCSI device server. */ ret = core_scsi3_alloc_registration(SE_DEV(cmd), se_sess->se_node_acl, se_deve, isid_ptr, sa_res_key, all_tg_pt, aptpl, ignore_key, 0); if (ret != 0) { printk(KERN_ERR "Unable to allocate" " struct t10_pr_registration\n"); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } } else { /* * Register both the Initiator port that received * PROUT SA REGISTER + SPEC_I_PT=1 and extract SCSI * TransportID from Parameter list and loop through * fabric dependent parameter list while calling * logic from of core_scsi3_alloc_registration() for * each TransportID provided SCSI Initiator Port/Device */ ret = core_scsi3_decode_spec_i_port(cmd, se_tpg, isid_ptr, sa_res_key, all_tg_pt, aptpl); if (ret != 0) return ret; } /* * Nothing left to do for the APTPL=0 case. */ if (!(aptpl)) { pr_tmpl->pr_aptpl_active = 0; core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); printk("SPC-3 PR: Set APTPL Bit Deactivated for" " REGISTER\n"); return 0; } /* * Locate the newly allocated local I_T Nexus *pr_reg, and * update the APTPL metadata information using its * preallocated *pr_reg->pr_aptpl_buf. */ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, se_sess); ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &pr_reg->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) { pr_tmpl->pr_aptpl_active = 1; printk("SPC-3 PR: Set APTPL Bit Activated for REGISTER\n"); } core_scsi3_put_pr_reg(pr_reg); return ret; } else { /* * Locate the existing *pr_reg via struct se_node_acl pointers */ pr_reg = pr_reg_e; type = pr_reg->pr_res_type; if (!(ignore_key)) { if (res_key != pr_reg->pr_res_key) { printk(KERN_ERR "SPC-3 PR REGISTER: Received" " res_key: 0x%016Lx does not match" " existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } } if (spec_i_pt) { printk(KERN_ERR "SPC-3 PR UNREGISTER: SPEC_I_PT" " set while sa_res_key=0\n"); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * An existing ALL_TG_PT=1 registration being released * must also set ALL_TG_PT=1 in the incoming PROUT. */ if (pr_reg->pr_reg_all_tg_pt && !(all_tg_pt)) { printk(KERN_ERR "SPC-3 PR UNREGISTER: ALL_TG_PT=1" " registration exists, but ALL_TG_PT=1 bit not" " present in received PROUT\n"); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_CDB_FIELD; } /* * Allocate APTPL metadata buffer used for UNREGISTER ops */ if (aptpl) { pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL); if (!(pr_aptpl_buf)) { printk(KERN_ERR "Unable to allocate" " pr_aptpl_buf\n"); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_LU_COMM_FAILURE; } } /* * sa_res_key=0 Unregister Reservation Key for registered I_T * Nexus sa_res_key=1 Change Reservation Key for registered I_T * Nexus. */ if (!(sa_res_key)) { pr_holder = core_scsi3_check_implict_release( SE_DEV(cmd), pr_reg); if (pr_holder < 0) { kfree(pr_aptpl_buf); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } spin_lock(&pr_tmpl->registration_lock); /* * Release all ALL_TG_PT=1 for the matching SCSI Initiator Port * and matching pr_res_key. */ if (pr_reg->pr_reg_all_tg_pt) { list_for_each_entry_safe(pr_reg_p, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { if (!(pr_reg_p->pr_reg_all_tg_pt)) continue; if (pr_reg_p->pr_res_key != res_key) continue; if (pr_reg == pr_reg_p) continue; if (strcmp(pr_reg->pr_reg_nacl->initiatorname, pr_reg_p->pr_reg_nacl->initiatorname)) continue; __core_scsi3_free_registration(dev, pr_reg_p, NULL, 0); } } /* * Release the calling I_T Nexus registration now.. */ __core_scsi3_free_registration(SE_DEV(cmd), pr_reg, NULL, 1); /* * From spc4r17, section 5.7.11.3 Unregistering * * If the persistent reservation is a registrants only * type, the device server shall establish a unit * attention condition for the initiator port associated * with every registered I_T nexus except for the I_T * nexus on which the PERSISTENT RESERVE OUT command was * received, with the additional sense code set to * RESERVATIONS RELEASED. */ if (pr_holder && ((type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || (type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY))) { list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list, pr_reg_list) { core_scsi3_ua_allocate( pr_reg_p->pr_reg_nacl, pr_reg_p->pr_res_mapped_lun, 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED); } } spin_unlock(&pr_tmpl->registration_lock); if (!(aptpl)) { pr_tmpl->pr_aptpl_active = 0; core_scsi3_update_and_write_aptpl(dev, NULL, 0); printk("SPC-3 PR: Set APTPL Bit Deactivated" " for UNREGISTER\n"); return 0; } ret = core_scsi3_update_and_write_aptpl(dev, &pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) { pr_tmpl->pr_aptpl_active = 1; printk("SPC-3 PR: Set APTPL Bit Activated" " for UNREGISTER\n"); } kfree(pr_aptpl_buf); return ret; } else { /* * Increment PRgeneration counter for struct se_device" * upon a successful REGISTER, see spc4r17 section 6.3.2 * READ_KEYS service action. */ pr_reg->pr_res_generation = core_scsi3_pr_generation( SE_DEV(cmd)); pr_reg->pr_res_key = sa_res_key; printk("SPC-3 PR [%s] REGISTER%s: Changed Reservation" " Key for %s to: 0x%016Lx PRgeneration:" " 0x%08x\n", CMD_TFO(cmd)->get_fabric_name(), (ignore_key) ? "_AND_IGNORE_EXISTING_KEY" : "", pr_reg->pr_reg_nacl->initiatorname, pr_reg->pr_res_key, pr_reg->pr_res_generation); if (!(aptpl)) { pr_tmpl->pr_aptpl_active = 0; core_scsi3_update_and_write_aptpl(dev, NULL, 0); core_scsi3_put_pr_reg(pr_reg); printk("SPC-3 PR: Set APTPL Bit Deactivated" " for REGISTER\n"); return 0; } ret = core_scsi3_update_and_write_aptpl(dev, &pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) { pr_tmpl->pr_aptpl_active = 1; printk("SPC-3 PR: Set APTPL Bit Activated" " for REGISTER\n"); } kfree(pr_aptpl_buf); core_scsi3_put_pr_reg(pr_reg); } } return 0; } unsigned char *core_scsi3_pr_dump_type(int type) { switch (type) { case PR_TYPE_WRITE_EXCLUSIVE: return "Write Exclusive Access"; case PR_TYPE_EXCLUSIVE_ACCESS: return "Exclusive Access"; case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: return "Write Exclusive Access, Registrants Only"; case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: return "Exclusive Access, Registrants Only"; case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: return "Write Exclusive Access, All Registrants"; case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: return "Exclusive Access, All Registrants"; default: break; } return "Unknown SPC-3 PR Type"; } static int core_scsi3_pro_reserve( struct se_cmd *cmd, struct se_device *dev, int type, int scope, u64 res_key) { struct se_session *se_sess = SE_SESS(cmd); struct se_dev_entry *se_deve; struct se_lun *se_lun = SE_LUN(cmd); struct se_portal_group *se_tpg; struct t10_pr_registration *pr_reg, *pr_res_holder; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; char i_buf[PR_REG_ISID_ID_LEN]; int ret, prf_isid; memset(i_buf, 0, PR_REG_ISID_ID_LEN); if (!(se_sess) || !(se_lun)) { printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; /* * Locate the existing *pr_reg via struct se_node_acl pointers */ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, se_sess); if (!(pr_reg)) { printk(KERN_ERR "SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RESERVE\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } /* * From spc4r17 Section 5.7.9: Reserving: * * An application client creates a persistent reservation by issuing * a PERSISTENT RESERVE OUT command with RESERVE service action through * a registered I_T nexus with the following parameters: * a) RESERVATION KEY set to the value of the reservation key that is * registered with the logical unit for the I_T nexus; and */ if (res_key != pr_reg->pr_res_key) { printk(KERN_ERR "SPC-3 PR RESERVE: Received res_key: 0x%016Lx" " does not match existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * From spc4r17 Section 5.7.9: Reserving: * * From above: * b) TYPE field and SCOPE field set to the persistent reservation * being created. * * Only one persistent reservation is allowed at a time per logical unit * and that persistent reservation has a scope of LU_SCOPE. */ if (scope != PR_SCOPE_LU_SCOPE) { printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * See if we have an existing PR reservation holder pointer at * struct se_device->dev_pr_res_holder in the form struct t10_pr_registration * *pr_res_holder. */ spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if ((pr_res_holder)) { /* * From spc4r17 Section 5.7.9: Reserving: * * If the device server receives a PERSISTENT RESERVE OUT * command from an I_T nexus other than a persistent reservation * holder (see 5.7.10) that attempts to create a persistent * reservation when a persistent reservation already exists for * the logical unit, then the command shall be completed with * RESERVATION CONFLICT status. */ if (pr_res_holder != pr_reg) { struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" " [%s]: %s while reservation already held by" " [%s]: %s, returning RESERVATION_CONFLICT\n", CMD_TFO(cmd)->get_fabric_name(), se_sess->se_node_acl->initiatorname, TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), pr_res_holder->pr_reg_nacl->initiatorname); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * From spc4r17 Section 5.7.9: Reserving: * * If a persistent reservation holder attempts to modify the * type or scope of an existing persistent reservation, the * command shall be completed with RESERVATION CONFLICT status. */ if ((pr_res_holder->pr_res_type != type) || (pr_res_holder->pr_res_scope != scope)) { struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" " [%s]: %s trying to change TYPE and/or SCOPE," " while reservation already held by [%s]: %s," " returning RESERVATION_CONFLICT\n", CMD_TFO(cmd)->get_fabric_name(), se_sess->se_node_acl->initiatorname, TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), pr_res_holder->pr_reg_nacl->initiatorname); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * From spc4r17 Section 5.7.9: Reserving: * * If the device server receives a PERSISTENT RESERVE OUT * command with RESERVE service action where the TYPE field and * the SCOPE field contain the same values as the existing type * and scope from a persistent reservation holder, it shall not * make any change to the existing persistent reservation and * shall completethe command with GOOD status. */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_SENT_TO_TRANSPORT; } /* * Otherwise, our *pr_reg becomes the PR reservation holder for said * TYPE/SCOPE. Also set the received scope and type in *pr_reg. */ pr_reg->pr_res_scope = scope; pr_reg->pr_res_type = type; pr_reg->pr_res_holder = 1; dev->dev_pr_res_holder = pr_reg; prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); printk(KERN_INFO "SPC-3 PR [%s] Service Action: RESERVE created new" " reservation holder TYPE: %s ALL_TG_PT: %d\n", CMD_TFO(cmd)->get_fabric_name(), core_scsi3_pr_dump_type(type), (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", CMD_TFO(cmd)->get_fabric_name(), se_sess->se_node_acl->initiatorname, (prf_isid) ? &i_buf[0] : ""); spin_unlock(&dev->dev_reservation_lock); if (pr_tmpl->pr_aptpl_active) { ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &pr_reg->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" " for RESERVE\n"); } core_scsi3_put_pr_reg(pr_reg); return 0; } static int core_scsi3_emulate_pro_reserve( struct se_cmd *cmd, int type, int scope, u64 res_key) { struct se_device *dev = cmd->se_dev; int ret = 0; switch (type) { case PR_TYPE_WRITE_EXCLUSIVE: case PR_TYPE_EXCLUSIVE_ACCESS: case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: ret = core_scsi3_pro_reserve(cmd, dev, type, scope, res_key); break; default: printk(KERN_ERR "SPC-3 PR: Unknown Service Action RESERVE Type:" " 0x%02x\n", type); return PYX_TRANSPORT_INVALID_CDB_FIELD; } return ret; } /* * Called with struct se_device->dev_reservation_lock held. */ static void __core_scsi3_complete_pro_release( struct se_device *dev, struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg, int explict) { struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo; char i_buf[PR_REG_ISID_ID_LEN]; int prf_isid; memset(i_buf, 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); /* * Go ahead and release the current PR reservation holder. */ dev->dev_pr_res_holder = NULL; printk(KERN_INFO "SPC-3 PR [%s] Service Action: %s RELEASE cleared" " reservation holder TYPE: %s ALL_TG_PT: %d\n", tfo->get_fabric_name(), (explict) ? "explict" : "implict", core_scsi3_pr_dump_type(pr_reg->pr_res_type), (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); printk(KERN_INFO "SPC-3 PR [%s] RELEASE Node: %s%s\n", tfo->get_fabric_name(), se_nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); /* * Clear TYPE and SCOPE for the next PROUT Service Action: RESERVE */ pr_reg->pr_res_holder = pr_reg->pr_res_type = pr_reg->pr_res_scope = 0; } static int core_scsi3_emulate_pro_release( struct se_cmd *cmd, int type, int scope, u64 res_key) { struct se_device *dev = cmd->se_dev; struct se_session *se_sess = SE_SESS(cmd); struct se_lun *se_lun = SE_LUN(cmd); struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_res_holder; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; int ret, all_reg = 0; if (!(se_sess) || !(se_lun)) { printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } /* * Locate the existing *pr_reg via struct se_node_acl pointers */ pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); if (!(pr_reg)) { printk(KERN_ERR "SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RELEASE\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } /* * From spc4r17 Section 5.7.11.2 Releasing: * * If there is no persistent reservation or in response to a persistent * reservation release request from a registered I_T nexus that is not a * persistent reservation holder (see 5.7.10), the device server shall * do the following: * * a) Not release the persistent reservation, if any; * b) Not remove any registrations; and * c) Complete the command with GOOD status. */ spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (!(pr_res_holder)) { /* * No persistent reservation, return GOOD status. */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_SENT_TO_TRANSPORT; } if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) all_reg = 1; if ((all_reg == 0) && (pr_res_holder != pr_reg)) { /* * Non 'All Registrants' PR Type cases.. * Release request from a registered I_T nexus that is not a * persistent reservation holder. return GOOD status. */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_SENT_TO_TRANSPORT; } /* * From spc4r17 Section 5.7.11.2 Releasing: * * Only the persistent reservation holder (see 5.7.10) is allowed to * release a persistent reservation. * * An application client releases the persistent reservation by issuing * a PERSISTENT RESERVE OUT command with RELEASE service action through * an I_T nexus that is a persistent reservation holder with the * following parameters: * * a) RESERVATION KEY field set to the value of the reservation key * that is registered with the logical unit for the I_T nexus; */ if (res_key != pr_reg->pr_res_key) { printk(KERN_ERR "SPC-3 PR RELEASE: Received res_key: 0x%016Lx" " does not match existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * From spc4r17 Section 5.7.11.2 Releasing and above: * * b) TYPE field and SCOPE field set to match the persistent * reservation being released. */ if ((pr_res_holder->pr_res_type != type) || (pr_res_holder->pr_res_scope != scope)) { struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; printk(KERN_ERR "SPC-3 PR RELEASE: Attempted to release" " reservation from [%s]: %s with different TYPE " "and/or SCOPE while reservation already held by" " [%s]: %s, returning RESERVATION_CONFLICT\n", CMD_TFO(cmd)->get_fabric_name(), se_sess->se_node_acl->initiatorname, TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), pr_res_holder->pr_reg_nacl->initiatorname); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * In response to a persistent reservation release request from the * persistent reservation holder the device server shall perform a * release by doing the following as an uninterrupted series of actions: * a) Release the persistent reservation; * b) Not remove any registration(s); * c) If the released persistent reservation is a registrants only type * or all registrants type persistent reservation, * the device server shall establish a unit attention condition for * the initiator port associated with every regis- * tered I_T nexus other than I_T nexus on which the PERSISTENT * RESERVE OUT command with RELEASE service action was received, * with the additional sense code set to RESERVATIONS RELEASED; and * d) If the persistent reservation is of any other type, the device * server shall not establish a unit attention condition. */ __core_scsi3_complete_pro_release(dev, se_sess->se_node_acl, pr_reg, 1); spin_unlock(&dev->dev_reservation_lock); if ((type != PR_TYPE_WRITE_EXCLUSIVE_REGONLY) && (type != PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) && (type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) && (type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { /* * If no UNIT ATTENTION conditions will be established for * PR_TYPE_WRITE_EXCLUSIVE or PR_TYPE_EXCLUSIVE_ACCESS * go ahead and check for APTPL=1 update+write below */ goto write_aptpl; } spin_lock(&pr_tmpl->registration_lock); list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list, pr_reg_list) { /* * Do not establish a UNIT ATTENTION condition * for the calling I_T Nexus */ if (pr_reg_p == pr_reg) continue; core_scsi3_ua_allocate(pr_reg_p->pr_reg_nacl, pr_reg_p->pr_res_mapped_lun, 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED); } spin_unlock(&pr_tmpl->registration_lock); write_aptpl: if (pr_tmpl->pr_aptpl_active) { ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &pr_reg->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) printk("SPC-3 PR: Updated APTPL metadata for RELEASE\n"); } core_scsi3_put_pr_reg(pr_reg); return 0; } static int core_scsi3_emulate_pro_clear( struct se_cmd *cmd, u64 res_key) { struct se_device *dev = cmd->se_dev; struct se_node_acl *pr_reg_nacl; struct se_session *se_sess = SE_SESS(cmd); struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; u32 pr_res_mapped_lun = 0; int calling_it_nexus = 0; /* * Locate the existing *pr_reg via struct se_node_acl pointers */ pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, se_sess); if (!(pr_reg_n)) { printk(KERN_ERR "SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for CLEAR\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } /* * From spc4r17 section 5.7.11.6, Clearing: * * Any application client may release the persistent reservation and * remove all registrations from a device server by issuing a * PERSISTENT RESERVE OUT command with CLEAR service action through a * registered I_T nexus with the following parameter: * * a) RESERVATION KEY field set to the value of the reservation key * that is registered with the logical unit for the I_T nexus. */ if (res_key != pr_reg_n->pr_res_key) { printk(KERN_ERR "SPC-3 PR REGISTER: Received" " res_key: 0x%016Lx does not match" " existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); core_scsi3_put_pr_reg(pr_reg_n); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * a) Release the persistent reservation, if any; */ spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (pr_res_holder) { struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; __core_scsi3_complete_pro_release(dev, pr_res_nacl, pr_res_holder, 0); } spin_unlock(&dev->dev_reservation_lock); /* * b) Remove all registration(s) (see spc4r17 5.7.7); */ spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; pr_reg_nacl = pr_reg->pr_reg_nacl; pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; __core_scsi3_free_registration(dev, pr_reg, NULL, calling_it_nexus); /* * e) Establish a unit attention condition for the initiator * port associated with every registered I_T nexus other * than the I_T nexus on which the PERSISTENT RESERVE OUT * command with CLEAR service action was received, with the * additional sense code set to RESERVATIONS PREEMPTED. */ if (!(calling_it_nexus)) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, ASCQ_2AH_RESERVATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); printk(KERN_INFO "SPC-3 PR [%s] Service Action: CLEAR complete\n", CMD_TFO(cmd)->get_fabric_name()); if (pr_tmpl->pr_aptpl_active) { core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" " for CLEAR\n"); } core_scsi3_pr_generation(dev); return 0; } /* * Called with struct se_device->dev_reservation_lock held. */ static void __core_scsi3_complete_pro_preempt( struct se_device *dev, struct t10_pr_registration *pr_reg, struct list_head *preempt_and_abort_list, int type, int scope, int abort) { struct se_node_acl *nacl = pr_reg->pr_reg_nacl; struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; char i_buf[PR_REG_ISID_ID_LEN]; int prf_isid; memset(i_buf, 0, PR_REG_ISID_ID_LEN); prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); /* * Do an implict RELEASE of the existing reservation. */ if (dev->dev_pr_res_holder) __core_scsi3_complete_pro_release(dev, nacl, dev->dev_pr_res_holder, 0); dev->dev_pr_res_holder = pr_reg; pr_reg->pr_res_holder = 1; pr_reg->pr_res_type = type; pr_reg->pr_res_scope = scope; printk(KERN_INFO "SPC-3 PR [%s] Service Action: PREEMPT%s created new" " reservation holder TYPE: %s ALL_TG_PT: %d\n", tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", core_scsi3_pr_dump_type(type), (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); printk(KERN_INFO "SPC-3 PR [%s] PREEMPT%s from Node: %s%s\n", tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); /* * For PREEMPT_AND_ABORT, add the preempting reservation's * struct t10_pr_registration to the list that will be compared * against received CDBs.. */ if (preempt_and_abort_list) list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list); } static void core_scsi3_release_preempt_and_abort( struct list_head *preempt_and_abort_list, struct t10_pr_registration *pr_reg_holder) { struct t10_pr_registration *pr_reg, *pr_reg_tmp; list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, pr_reg_abort_list) { list_del(&pr_reg->pr_reg_abort_list); if (pr_reg_holder == pr_reg) continue; if (pr_reg->pr_res_holder) { printk(KERN_WARNING "pr_reg->pr_res_holder still set\n"); continue; } pr_reg->pr_reg_deve = NULL; pr_reg->pr_reg_nacl = NULL; kfree(pr_reg->pr_aptpl_buf); kmem_cache_free(t10_pr_reg_cache, pr_reg); } } int core_scsi3_check_cdb_abort_and_preempt( struct list_head *preempt_and_abort_list, struct se_cmd *cmd) { struct t10_pr_registration *pr_reg, *pr_reg_tmp; list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, pr_reg_abort_list) { if (pr_reg->pr_res_key == cmd->pr_res_key) return 0; } return 1; } static int core_scsi3_pro_preempt( struct se_cmd *cmd, int type, int scope, u64 res_key, u64 sa_res_key, int abort) { struct se_device *dev = SE_DEV(cmd); struct se_dev_entry *se_deve; struct se_node_acl *pr_reg_nacl; struct se_session *se_sess = SE_SESS(cmd); struct list_head preempt_and_abort_list; struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; u32 pr_res_mapped_lun = 0; int all_reg = 0, calling_it_nexus = 0, released_regs = 0; int prh_type = 0, prh_scope = 0, ret; if (!(se_sess)) return PYX_TRANSPORT_LU_COMM_FAILURE; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, se_sess); if (!(pr_reg_n)) { printk(KERN_ERR "SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for PREEMPT%s\n", (abort) ? "_AND_ABORT" : ""); return PYX_TRANSPORT_RESERVATION_CONFLICT; } if (pr_reg_n->pr_res_key != res_key) { core_scsi3_put_pr_reg(pr_reg_n); return PYX_TRANSPORT_RESERVATION_CONFLICT; } if (scope != PR_SCOPE_LU_SCOPE) { printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg_n); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } INIT_LIST_HEAD(&preempt_and_abort_list); spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (pr_res_holder && ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))) all_reg = 1; if (!(all_reg) && !(sa_res_key)) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * From spc4r17, section 5.7.11.4.4 Removing Registrations: * * If the SERVICE ACTION RESERVATION KEY field does not identify a * persistent reservation holder or there is no persistent reservation * holder (i.e., there is no persistent reservation), then the device * server shall perform a preempt by doing the following in an * uninterrupted series of actions. (See below..) */ if (!(pr_res_holder) || (pr_res_holder->pr_res_key != sa_res_key)) { /* * No existing or SA Reservation Key matching reservations.. * * PROUT SA PREEMPT with All Registrant type reservations are * allowed to be processed without a matching SA Reservation Key */ spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { /* * Removing of registrations in non all registrants * type reservations without a matching SA reservation * key. * * a) Remove the registrations for all I_T nexuses * specified by the SERVICE ACTION RESERVATION KEY * field; * b) Ignore the contents of the SCOPE and TYPE fields; * c) Process tasks as defined in 5.7.1; and * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. */ if (!(all_reg)) { if (pr_reg->pr_res_key != sa_res_key) continue; calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; pr_reg_nacl = pr_reg->pr_reg_nacl; pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; __core_scsi3_free_registration(dev, pr_reg, (abort) ? &preempt_and_abort_list : NULL, calling_it_nexus); released_regs++; } else { /* * Case for any existing all registrants type * reservation, follow logic in spc4r17 section * 5.7.11.4 Preempting, Table 52 and Figure 7. * * For a ZERO SA Reservation key, release * all other registrations and do an implict * release of active persistent reservation. * * For a non-ZERO SA Reservation key, only * release the matching reservation key from * registrations. */ if ((sa_res_key) && (pr_reg->pr_res_key != sa_res_key)) continue; calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; if (calling_it_nexus) continue; pr_reg_nacl = pr_reg->pr_reg_nacl; pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; __core_scsi3_free_registration(dev, pr_reg, (abort) ? &preempt_and_abort_list : NULL, 0); released_regs++; } if (!(calling_it_nexus)) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* * If a PERSISTENT RESERVE OUT with a PREEMPT service action or * a PREEMPT AND ABORT service action sets the SERVICE ACTION * RESERVATION KEY field to a value that does not match any * registered reservation key, then the device server shall * complete the command with RESERVATION CONFLICT status. */ if (!(released_regs)) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * For an existing all registrants type reservation * with a zero SA rservation key, preempt the existing * reservation with the new PR type and scope. */ if (pr_res_holder && all_reg && !(sa_res_key)) { __core_scsi3_complete_pro_preempt(dev, pr_reg_n, (abort) ? &preempt_and_abort_list : NULL, type, scope, abort); if (abort) core_scsi3_release_preempt_and_abort( &preempt_and_abort_list, pr_reg_n); } spin_unlock(&dev->dev_reservation_lock); if (pr_tmpl->pr_aptpl_active) { ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &pr_reg_n->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) printk(KERN_INFO "SPC-3 PR: Updated APTPL" " metadata for PREEMPT%s\n", (abort) ? "_AND_ABORT" : ""); } core_scsi3_put_pr_reg(pr_reg_n); core_scsi3_pr_generation(SE_DEV(cmd)); return 0; } /* * The PREEMPTing SA reservation key matches that of the * existing persistent reservation, first, we check if * we are preempting our own reservation. * From spc4r17, section 5.7.11.4.3 Preempting * persistent reservations and registration handling * * If an all registrants persistent reservation is not * present, it is not an error for the persistent * reservation holder to preempt itself (i.e., a * PERSISTENT RESERVE OUT with a PREEMPT service action * or a PREEMPT AND ABORT service action with the * SERVICE ACTION RESERVATION KEY value equal to the * persistent reservation holder's reservation key that * is received from the persistent reservation holder). * In that case, the device server shall establish the * new persistent reservation and maintain the * registration. */ prh_type = pr_res_holder->pr_res_type; prh_scope = pr_res_holder->pr_res_scope; /* * If the SERVICE ACTION RESERVATION KEY field identifies a * persistent reservation holder (see 5.7.10), the device * server shall perform a preempt by doing the following as * an uninterrupted series of actions: * * a) Release the persistent reservation for the holder * identified by the SERVICE ACTION RESERVATION KEY field; */ if (pr_reg_n != pr_res_holder) __core_scsi3_complete_pro_release(dev, pr_res_holder->pr_reg_nacl, dev->dev_pr_res_holder, 0); /* * b) Remove the registrations for all I_T nexuses identified * by the SERVICE ACTION RESERVATION KEY field, except the * I_T nexus that is being used for the PERSISTENT RESERVE * OUT command. If an all registrants persistent reservation * is present and the SERVICE ACTION RESERVATION KEY field * is set to zero, then all registrations shall be removed * except for that of the I_T nexus that is being used for * the PERSISTENT RESERVE OUT command; */ spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; if (calling_it_nexus) continue; if (pr_reg->pr_res_key != sa_res_key) continue; pr_reg_nacl = pr_reg->pr_reg_nacl; pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; __core_scsi3_free_registration(dev, pr_reg, (abort) ? &preempt_and_abort_list : NULL, calling_it_nexus); /* * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; */ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* * c) Establish a persistent reservation for the preempting * I_T nexus using the contents of the SCOPE and TYPE fields; */ __core_scsi3_complete_pro_preempt(dev, pr_reg_n, (abort) ? &preempt_and_abort_list : NULL, type, scope, abort); /* * d) Process tasks as defined in 5.7.1; * e) See above.. * f) If the type or scope has changed, then for every I_T nexus * whose reservation key was not removed, except for the I_T * nexus on which the PERSISTENT RESERVE OUT command was * received, the device server shall establish a unit * attention condition for the initiator port associated with * that I_T nexus, with the additional sense code set to * RESERVATIONS RELEASED. If the type or scope have not * changed, then no unit attention condition(s) shall be * established for this reason. */ if ((prh_type != type) || (prh_scope != scope)) { spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; if (calling_it_nexus) continue; core_scsi3_ua_allocate(pr_reg->pr_reg_nacl, pr_reg->pr_res_mapped_lun, 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED); } spin_unlock(&pr_tmpl->registration_lock); } spin_unlock(&dev->dev_reservation_lock); /* * Call LUN_RESET logic upon list of struct t10_pr_registration, * All received CDBs for the matching existing reservation and * registrations undergo ABORT_TASK logic. * * From there, core_scsi3_release_preempt_and_abort() will * release every registration in the list (which have already * been removed from the primary pr_reg list), except the * new persistent reservation holder, the calling Initiator Port. */ if (abort) { core_tmr_lun_reset(dev, NULL, &preempt_and_abort_list, cmd); core_scsi3_release_preempt_and_abort(&preempt_and_abort_list, pr_reg_n); } if (pr_tmpl->pr_aptpl_active) { ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &pr_reg_n->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) printk("SPC-3 PR: Updated APTPL metadata for PREEMPT" "%s\n", (abort) ? "_AND_ABORT" : ""); } core_scsi3_put_pr_reg(pr_reg_n); core_scsi3_pr_generation(SE_DEV(cmd)); return 0; } static int core_scsi3_emulate_pro_preempt( struct se_cmd *cmd, int type, int scope, u64 res_key, u64 sa_res_key, int abort) { int ret = 0; switch (type) { case PR_TYPE_WRITE_EXCLUSIVE: case PR_TYPE_EXCLUSIVE_ACCESS: case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: ret = core_scsi3_pro_preempt(cmd, type, scope, res_key, sa_res_key, abort); break; default: printk(KERN_ERR "SPC-3 PR: Unknown Service Action PREEMPT%s" " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); return PYX_TRANSPORT_INVALID_CDB_FIELD; } return ret; } static int core_scsi3_emulate_pro_register_and_move( struct se_cmd *cmd, u64 res_key, u64 sa_res_key, int aptpl, int unreg) { struct se_session *se_sess = SE_SESS(cmd); struct se_device *dev = SE_DEV(cmd); struct se_dev_entry *se_deve, *dest_se_deve = NULL; struct se_lun *se_lun = SE_LUN(cmd); struct se_node_acl *pr_res_nacl, *pr_reg_nacl, *dest_node_acl = NULL; struct se_port *se_port; struct se_portal_group *se_tpg, *dest_se_tpg = NULL; struct target_core_fabric_ops *dest_tf_ops = NULL, *tf_ops; struct t10_pr_registration *pr_reg, *pr_res_holder, *dest_pr_reg; struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; unsigned char *initiator_str; char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; u32 tid_len, tmp_tid_len; int new_reg = 0, type, scope, ret, matching_iname, prf_isid; unsigned short rtpi; unsigned char proto_ident; if (!(se_sess) || !(se_lun)) { printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } memset(dest_iport, 0, 64); memset(i_buf, 0, PR_REG_ISID_ID_LEN); se_tpg = se_sess->se_tpg; tf_ops = TPG_TFO(se_tpg); se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; /* * Follow logic from spc4r17 Section 5.7.8, Table 50 -- * Register behaviors for a REGISTER AND MOVE service action * * Locate the existing *pr_reg via struct se_node_acl pointers */ pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, se_sess); if (!(pr_reg)) { printk(KERN_ERR "SPC-3 PR: Unable to locate PR_REGISTERED" " *pr_reg for REGISTER_AND_MOVE\n"); return PYX_TRANSPORT_LU_COMM_FAILURE; } /* * The provided reservation key much match the existing reservation key * provided during this initiator's I_T nexus registration. */ if (res_key != pr_reg->pr_res_key) { printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received" " res_key: 0x%016Lx does not match existing SA REGISTER" " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_RESERVATION_CONFLICT; } /* * The service active reservation key needs to be non zero */ if (!(sa_res_key)) { printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received zero" " sa_res_key\n"); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * Determine the Relative Target Port Identifier where the reservation * will be moved to for the TransportID containing SCSI initiator WWN * information. */ rtpi = (buf[18] & 0xff) << 8; rtpi |= buf[19] & 0xff; tid_len = (buf[20] & 0xff) << 24; tid_len |= (buf[21] & 0xff) << 16; tid_len |= (buf[22] & 0xff) << 8; tid_len |= buf[23] & 0xff; if ((tid_len + 24) != cmd->data_length) { printk(KERN_ERR "SPC-3 PR: Illegal tid_len: %u + 24 byte header" " does not equal CDB data_length: %u\n", tid_len, cmd->data_length); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } spin_lock(&dev->se_port_lock); list_for_each_entry(se_port, &dev->dev_sep_list, sep_list) { if (se_port->sep_rtpi != rtpi) continue; dest_se_tpg = se_port->sep_tpg; if (!(dest_se_tpg)) continue; dest_tf_ops = TPG_TFO(dest_se_tpg); if (!(dest_tf_ops)) continue; atomic_inc(&dest_se_tpg->tpg_pr_ref_count); smp_mb__after_atomic_inc(); spin_unlock(&dev->se_port_lock); ret = core_scsi3_tpg_depend_item(dest_se_tpg); if (ret != 0) { printk(KERN_ERR "core_scsi3_tpg_depend_item() failed" " for dest_se_tpg\n"); atomic_dec(&dest_se_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_LU_COMM_FAILURE; } spin_lock(&dev->se_port_lock); break; } spin_unlock(&dev->se_port_lock); if (!(dest_se_tpg) || (!dest_tf_ops)) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" " fabric ops from Relative Target Port Identifier:" " %hu\n", rtpi); core_scsi3_put_pr_reg(pr_reg); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } proto_ident = (buf[24] & 0x0f); #if 0 printk("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" " 0x%02x\n", proto_ident); #endif if (proto_ident != dest_tf_ops->get_fabric_proto_ident(dest_se_tpg)) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Received" " proto_ident: 0x%02x does not match ident: 0x%02x" " from fabric: %s\n", proto_ident, dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), dest_tf_ops->get_fabric_name()); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Fabric does not" " containg a valid tpg_parse_pr_out_transport_id" " function pointer\n"); ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, (const char *)&buf[24], &tmp_tid_len, &iport_ptr); if (!(initiator_str)) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" " initiator_str from Transport ID\n"); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } printk(KERN_INFO "SPC-3 PR [%s] Extracted initiator %s identifier: %s" " %s\n", dest_tf_ops->get_fabric_name(), (iport_ptr != NULL) ? "port" : "device", initiator_str, (iport_ptr != NULL) ? iport_ptr : ""); /* * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service * action specifies a TransportID that is the same as the initiator port * of the I_T nexus for the command received, then the command shall * be terminated with CHECK CONDITION status, with the sense key set to * ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD * IN PARAMETER LIST. */ pr_reg_nacl = pr_reg->pr_reg_nacl; matching_iname = (!strcmp(initiator_str, pr_reg_nacl->initiatorname)) ? 1 : 0; if (!(matching_iname)) goto after_iport_check; if (!(iport_ptr) || !(pr_reg->isid_present_at_reg)) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" " matches: %s on received I_T Nexus\n", initiator_str, pr_reg_nacl->initiatorname); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } if (!(strcmp(iport_ptr, pr_reg->pr_reg_isid))) { printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s" " matches: %s %s on received I_T Nexus\n", initiator_str, iport_ptr, pr_reg_nacl->initiatorname, pr_reg->pr_reg_isid); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } after_iport_check: /* * Locate the destination struct se_node_acl from the received Transport ID */ spin_lock_bh(&dest_se_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg, initiator_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } spin_unlock_bh(&dest_se_tpg->acl_node_lock); if (!(dest_node_acl)) { printk(KERN_ERR "Unable to locate %s dest_node_acl for" " TransportID%s\n", dest_tf_ops->get_fabric_name(), initiator_str); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } ret = core_scsi3_nodeacl_depend_item(dest_node_acl); if (ret != 0) { printk(KERN_ERR "core_scsi3_nodeacl_depend_item() for" " dest_node_acl\n"); atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); dest_node_acl = NULL; ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } #if 0 printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Found %s dest_node_acl:" " %s from TransportID\n", dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname); #endif /* * Locate the struct se_dev_entry pointer for the matching RELATIVE TARGET * PORT IDENTIFIER. */ dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, rtpi); if (!(dest_se_deve)) { printk(KERN_ERR "Unable to locate %s dest_se_deve from RTPI:" " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } ret = core_scsi3_lunacl_depend_item(dest_se_deve); if (ret < 0) { printk(KERN_ERR "core_scsi3_lunacl_depend_item() failed\n"); atomic_dec(&dest_se_deve->pr_ref_count); smp_mb__after_atomic_dec(); dest_se_deve = NULL; ret = PYX_TRANSPORT_LU_COMM_FAILURE; goto out; } #if 0 printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Located %s node %s LUN" " ACL for dest_se_deve->mapped_lun: %u\n", dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname, dest_se_deve->mapped_lun); #endif /* * A persistent reservation needs to already existing in order to * successfully complete the REGISTER_AND_MOVE service action.. */ spin_lock(&dev->dev_reservation_lock); pr_res_holder = dev->dev_pr_res_holder; if (!(pr_res_holder)) { printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: No reservation" " currently held\n"); spin_unlock(&dev->dev_reservation_lock); ret = PYX_TRANSPORT_INVALID_CDB_FIELD; goto out; } /* * The received on I_T Nexus must be the reservation holder. * * From spc4r17 section 5.7.8 Table 50 -- * Register behaviors for a REGISTER AND MOVE service action */ if (pr_res_holder != pr_reg) { printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Calling I_T" " Nexus is not reservation holder\n"); spin_unlock(&dev->dev_reservation_lock); ret = PYX_TRANSPORT_RESERVATION_CONFLICT; goto out; } /* * From spc4r17 section 5.7.8: registering and moving reservation * * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service * action is received and the established persistent reservation is a * Write Exclusive - All Registrants type or Exclusive Access - * All Registrants type reservation, then the command shall be completed * with RESERVATION CONFLICT status. */ if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Unable to move" " reservation for type: %s\n", core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); spin_unlock(&dev->dev_reservation_lock); ret = PYX_TRANSPORT_RESERVATION_CONFLICT; goto out; } pr_res_nacl = pr_res_holder->pr_reg_nacl; /* * b) Ignore the contents of the (received) SCOPE and TYPE fields; */ type = pr_res_holder->pr_res_type; scope = pr_res_holder->pr_res_type; /* * c) Associate the reservation key specified in the SERVICE ACTION * RESERVATION KEY field with the I_T nexus specified as the * destination of the register and move, where: * A) The I_T nexus is specified by the TransportID and the * RELATIVE TARGET PORT IDENTIFIER field (see 6.14.4); and * B) Regardless of the TransportID format used, the association for * the initiator port is based on either the initiator port name * (see 3.1.71) on SCSI transport protocols where port names are * required or the initiator port identifier (see 3.1.70) on SCSI * transport protocols where port names are not required; * d) Register the reservation key specified in the SERVICE ACTION * RESERVATION KEY field; * e) Retain the reservation key specified in the SERVICE ACTION * RESERVATION KEY field and associated information; * * Also, It is not an error for a REGISTER AND MOVE service action to * register an I_T nexus that is already registered with the same * reservation key or a different reservation key. */ dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, iport_ptr); if (!(dest_pr_reg)) { ret = core_scsi3_alloc_registration(SE_DEV(cmd), dest_node_acl, dest_se_deve, iport_ptr, sa_res_key, 0, aptpl, 2, 1); if (ret != 0) { spin_unlock(&dev->dev_reservation_lock); ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; goto out; } dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, iport_ptr); new_reg = 1; } /* * f) Release the persistent reservation for the persistent reservation * holder (i.e., the I_T nexus on which the */ __core_scsi3_complete_pro_release(dev, pr_res_nacl, dev->dev_pr_res_holder, 0); /* * g) Move the persistent reservation to the specified I_T nexus using * the same scope and type as the persistent reservation released in * item f); and */ dev->dev_pr_res_holder = dest_pr_reg; dest_pr_reg->pr_res_holder = 1; dest_pr_reg->pr_res_type = type; pr_reg->pr_res_scope = scope; prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], PR_REG_ISID_ID_LEN); /* * Increment PRGeneration for existing registrations.. */ if (!(new_reg)) dest_pr_reg->pr_res_generation = pr_tmpl->pr_generation++; spin_unlock(&dev->dev_reservation_lock); printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER_AND_MOVE" " created new reservation holder TYPE: %s on object RTPI:" " %hu PRGeneration: 0x%08x\n", dest_tf_ops->get_fabric_name(), core_scsi3_pr_dump_type(type), rtpi, dest_pr_reg->pr_res_generation); printk(KERN_INFO "SPC-3 PR Successfully moved reservation from" " %s Fabric Node: %s%s -> %s Fabric Node: %s %s\n", tf_ops->get_fabric_name(), pr_reg_nacl->initiatorname, (prf_isid) ? &i_buf[0] : "", dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname, (iport_ptr != NULL) ? iport_ptr : ""); /* * It is now safe to release configfs group dependencies for destination * of Transport ID Initiator Device/Port Identifier */ core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_se_tpg); /* * h) If the UNREG bit is set to one, unregister (see 5.7.11.3) the I_T * nexus on which PERSISTENT RESERVE OUT command was received. */ if (unreg) { spin_lock(&pr_tmpl->registration_lock); __core_scsi3_free_registration(dev, pr_reg, NULL, 1); spin_unlock(&pr_tmpl->registration_lock); } else core_scsi3_put_pr_reg(pr_reg); /* * Clear the APTPL metadata if APTPL has been disabled, otherwise * write out the updated metadata to struct file for this SCSI device. */ if (!(aptpl)) { pr_tmpl->pr_aptpl_active = 0; core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); printk("SPC-3 PR: Set APTPL Bit Deactivated for" " REGISTER_AND_MOVE\n"); } else { pr_tmpl->pr_aptpl_active = 1; ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), &dest_pr_reg->pr_aptpl_buf[0], pr_tmpl->pr_aptpl_buf_len); if (!(ret)) printk("SPC-3 PR: Set APTPL Bit Activated for" " REGISTER_AND_MOVE\n"); } core_scsi3_put_pr_reg(dest_pr_reg); return 0; out: if (dest_se_deve) core_scsi3_lunacl_undepend_item(dest_se_deve); if (dest_node_acl) core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_se_tpg); core_scsi3_put_pr_reg(pr_reg); return ret; } static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb) { unsigned int __v1, __v2; __v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3]; __v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7]; return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; } /* * See spc4r17 section 6.14 Table 170 */ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb) { unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; u64 res_key, sa_res_key; int sa, scope, type, aptpl; int spec_i_pt = 0, all_tg_pt = 0, unreg = 0; /* * FIXME: A NULL struct se_session pointer means an this is not coming from * a $FABRIC_MOD's nexus, but from internal passthrough ops. */ if (!(SE_SESS(cmd))) return PYX_TRANSPORT_LU_COMM_FAILURE; if (cmd->data_length < 24) { printk(KERN_WARNING "SPC-PR: Received PR OUT parameter list" " length too small: %u\n", cmd->data_length); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB) */ sa = (cdb[1] & 0x1f); scope = (cdb[2] & 0xf0); type = (cdb[2] & 0x0f); /* * From PERSISTENT_RESERVE_OUT parameter list (payload) */ res_key = core_scsi3_extract_reservation_key(&buf[0]); sa_res_key = core_scsi3_extract_reservation_key(&buf[8]); /* * REGISTER_AND_MOVE uses a different SA parameter list containing * SCSI TransportIDs. */ if (sa != PRO_REGISTER_AND_MOVE) { spec_i_pt = (buf[20] & 0x08); all_tg_pt = (buf[20] & 0x04); aptpl = (buf[20] & 0x01); } else { aptpl = (buf[17] & 0x01); unreg = (buf[17] & 0x02); } /* * SPEC_I_PT=1 is only valid for Service action: REGISTER */ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) return PYX_TRANSPORT_INVALID_PARAMETER_LIST; /* * From spc4r17 section 6.14: * * If the SPEC_I_PT bit is set to zero, the service action is not * REGISTER AND MOVE, and the parameter list length is not 24, then * the command shall be terminated with CHECK CONDITION status, with * the sense key set to ILLEGAL REQUEST, and the additional sense * code set to PARAMETER LIST LENGTH ERROR. */ if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) && (cmd->data_length != 24)) { printk(KERN_WARNING "SPC-PR: Received PR OUT illegal parameter" " list length: %u\n", cmd->data_length); return PYX_TRANSPORT_INVALID_PARAMETER_LIST; } /* * (core_scsi3_emulate_pro_* function parameters * are defined by spc4r17 Table 174: * PERSISTENT_RESERVE_OUT service actions and valid parameters. */ switch (sa) { case PRO_REGISTER: return core_scsi3_emulate_pro_register(cmd, res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0); case PRO_RESERVE: return core_scsi3_emulate_pro_reserve(cmd, type, scope, res_key); case PRO_RELEASE: return core_scsi3_emulate_pro_release(cmd, type, scope, res_key); case PRO_CLEAR: return core_scsi3_emulate_pro_clear(cmd, res_key); case PRO_PREEMPT: return core_scsi3_emulate_pro_preempt(cmd, type, scope, res_key, sa_res_key, 0); case PRO_PREEMPT_AND_ABORT: return core_scsi3_emulate_pro_preempt(cmd, type, scope, res_key, sa_res_key, 1); case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: return core_scsi3_emulate_pro_register(cmd, 0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1); case PRO_REGISTER_AND_MOVE: return core_scsi3_emulate_pro_register_and_move(cmd, res_key, sa_res_key, aptpl, unreg); default: printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" " action: 0x%02x\n", cdb[1] & 0x1f); return PYX_TRANSPORT_INVALID_CDB_FIELD; } return PYX_TRANSPORT_INVALID_CDB_FIELD; } /* * PERSISTENT_RESERVE_IN Service Action READ_KEYS * * See spc4r17 section 5.7.6.2 and section 6.13.2, Table 160 */ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) { struct se_device *se_dev = SE_DEV(cmd); struct se_subsystem_dev *su_dev = SU_DEV(se_dev); struct t10_pr_registration *pr_reg; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; u32 add_len = 0, off = 8; if (cmd->data_length < 8) { printk(KERN_ERR "PRIN SA READ_KEYS SCSI Data Length: %u" " too small\n", cmd->data_length); return PYX_TRANSPORT_INVALID_CDB_FIELD; } buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); spin_lock(&T10_RES(su_dev)->registration_lock); list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, pr_reg_list) { /* * Check for overflow of 8byte PRI READ_KEYS payload and * next reservation key list descriptor. */ if ((add_len + 8) > (cmd->data_length - 8)) break; buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); buf[off++] = (pr_reg->pr_res_key & 0xff); add_len += 8; } spin_unlock(&T10_RES(su_dev)->registration_lock); buf[4] = ((add_len >> 24) & 0xff); buf[5] = ((add_len >> 16) & 0xff); buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); return 0; } /* * PERSISTENT_RESERVE_IN Service Action READ_RESERVATION * * See spc4r17 section 5.7.6.3 and section 6.13.3.2 Table 161 and 162 */ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) { struct se_device *se_dev = SE_DEV(cmd); struct se_subsystem_dev *su_dev = SU_DEV(se_dev); struct t10_pr_registration *pr_reg; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; u64 pr_res_key; u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */ if (cmd->data_length < 8) { printk(KERN_ERR "PRIN SA READ_RESERVATIONS SCSI Data Length: %u" " too small\n", cmd->data_length); return PYX_TRANSPORT_INVALID_CDB_FIELD; } buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); spin_lock(&se_dev->dev_reservation_lock); pr_reg = se_dev->dev_pr_res_holder; if ((pr_reg)) { /* * Set the hardcoded Additional Length */ buf[4] = ((add_len >> 24) & 0xff); buf[5] = ((add_len >> 16) & 0xff); buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); if (cmd->data_length < 22) { spin_unlock(&se_dev->dev_reservation_lock); return 0; } /* * Set the Reservation key. * * From spc4r17, section 5.7.10: * A persistent reservation holder has its reservation key * returned in the parameter data from a PERSISTENT * RESERVE IN command with READ RESERVATION service action as * follows: * a) For a persistent reservation of the type Write Exclusive * - All Registrants or Exclusive Access ­ All Regitrants, * the reservation key shall be set to zero; or * b) For all other persistent reservation types, the * reservation key shall be set to the registered * reservation key for the I_T nexus that holds the * persistent reservation. */ if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) pr_res_key = 0; else pr_res_key = pr_reg->pr_res_key; buf[8] = ((pr_res_key >> 56) & 0xff); buf[9] = ((pr_res_key >> 48) & 0xff); buf[10] = ((pr_res_key >> 40) & 0xff); buf[11] = ((pr_res_key >> 32) & 0xff); buf[12] = ((pr_res_key >> 24) & 0xff); buf[13] = ((pr_res_key >> 16) & 0xff); buf[14] = ((pr_res_key >> 8) & 0xff); buf[15] = (pr_res_key & 0xff); /* * Set the SCOPE and TYPE */ buf[21] = (pr_reg->pr_res_scope & 0xf0) | (pr_reg->pr_res_type & 0x0f); } spin_unlock(&se_dev->dev_reservation_lock); return 0; } /* * PERSISTENT_RESERVE_IN Service Action REPORT_CAPABILITIES * * See spc4r17 section 6.13.4 Table 165 */ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) { struct se_device *dev = SE_DEV(cmd); struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; u16 add_len = 8; /* Hardcoded to 8. */ if (cmd->data_length < 6) { printk(KERN_ERR "PRIN SA REPORT_CAPABILITIES SCSI Data Length:" " %u too small\n", cmd->data_length); return PYX_TRANSPORT_INVALID_CDB_FIELD; } buf[0] = ((add_len << 8) & 0xff); buf[1] = (add_len & 0xff); buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */ buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */ buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */ buf[2] |= 0x01; /* PTPL_C: Persistence across Target Power Loss bit */ /* * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so * set the TMV: Task Mask Valid bit. */ buf[3] |= 0x80; /* * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166 */ buf[3] |= 0x10; /* ALLOW COMMANDs field 001b */ /* * PTPL_A: Persistence across Target Power Loss Active bit */ if (pr_tmpl->pr_aptpl_active) buf[3] |= 0x01; /* * Setup the PERSISTENT RESERVATION TYPE MASK from Table 167 */ buf[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ buf[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */ buf[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */ buf[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */ buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ return 0; } /* * PERSISTENT_RESERVE_IN Service Action READ_FULL_STATUS * * See spc4r17 section 6.13.5 Table 168 and 169 */ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) { struct se_device *se_dev = SE_DEV(cmd); struct se_node_acl *se_nacl; struct se_subsystem_dev *su_dev = SU_DEV(se_dev); struct se_portal_group *se_tpg; struct t10_pr_registration *pr_reg, *pr_reg_tmp; struct t10_reservation_template *pr_tmpl = &SU_DEV(se_dev)->t10_reservation; unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len; u32 off = 8; /* off into first Full Status descriptor */ int format_code = 0; if (cmd->data_length < 8) { printk(KERN_ERR "PRIN SA READ_FULL_STATUS SCSI Data Length: %u" " too small\n", cmd->data_length); return PYX_TRANSPORT_INVALID_CDB_FIELD; } buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); spin_lock(&pr_tmpl->registration_lock); list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->registration_list, pr_reg_list) { se_nacl = pr_reg->pr_reg_nacl; se_tpg = pr_reg->pr_reg_nacl->se_tpg; add_desc_len = 0; atomic_inc(&pr_reg->pr_res_holders); smp_mb__after_atomic_inc(); spin_unlock(&pr_tmpl->registration_lock); /* * Determine expected length of $FABRIC_MOD specific * TransportID full status descriptor.. */ exp_desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id_len( se_tpg, se_nacl, pr_reg, &format_code); if ((exp_desc_len + add_len) > cmd->data_length) { printk(KERN_WARNING "SPC-3 PRIN READ_FULL_STATUS ran" " out of buffer: %d\n", cmd->data_length); spin_lock(&pr_tmpl->registration_lock); atomic_dec(&pr_reg->pr_res_holders); smp_mb__after_atomic_dec(); break; } /* * Set RESERVATION KEY */ buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); buf[off++] = (pr_reg->pr_res_key & 0xff); off += 4; /* Skip Over Reserved area */ /* * Set ALL_TG_PT bit if PROUT SA REGISTER had this set. */ if (pr_reg->pr_reg_all_tg_pt) buf[off] = 0x02; /* * The struct se_lun pointer will be present for the * reservation holder for PR_HOLDER bit. * * Also, if this registration is the reservation * holder, fill in SCOPE and TYPE in the next byte. */ if (pr_reg->pr_res_holder) { buf[off++] |= 0x01; buf[off++] = (pr_reg->pr_res_scope & 0xf0) | (pr_reg->pr_res_type & 0x0f); } else off += 2; off += 4; /* Skip over reserved area */ /* * From spc4r17 6.3.15: * * If the ALL_TG_PT bit set to zero, the RELATIVE TARGET PORT * IDENTIFIER field contains the relative port identifier (see * 3.1.120) of the target port that is part of the I_T nexus * described by this full status descriptor. If the ALL_TG_PT * bit is set to one, the contents of the RELATIVE TARGET PORT * IDENTIFIER field are not defined by this standard. */ if (!(pr_reg->pr_reg_all_tg_pt)) { struct se_port *port = pr_reg->pr_reg_tg_pt_lun->lun_sep; buf[off++] = ((port->sep_rtpi >> 8) & 0xff); buf[off++] = (port->sep_rtpi & 0xff); } else off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */ /* * Now, have the $FABRIC_MOD fill in the protocol identifier */ desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id(se_tpg, se_nacl, pr_reg, &format_code, &buf[off+4]); spin_lock(&pr_tmpl->registration_lock); atomic_dec(&pr_reg->pr_res_holders); smp_mb__after_atomic_dec(); /* * Set the ADDITIONAL DESCRIPTOR LENGTH */ buf[off++] = ((desc_len >> 24) & 0xff); buf[off++] = ((desc_len >> 16) & 0xff); buf[off++] = ((desc_len >> 8) & 0xff); buf[off++] = (desc_len & 0xff); /* * Size of full desctipor header minus TransportID * containing $FABRIC_MOD specific) initiator device/port * WWN information. * * See spc4r17 Section 6.13.5 Table 169 */ add_desc_len = (24 + desc_len); off += desc_len; add_len += add_desc_len; } spin_unlock(&pr_tmpl->registration_lock); /* * Set ADDITIONAL_LENGTH */ buf[4] = ((add_len >> 24) & 0xff); buf[5] = ((add_len >> 16) & 0xff); buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); return 0; } static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb) { switch (cdb[1] & 0x1f) { case PRI_READ_KEYS: return core_scsi3_pri_read_keys(cmd); case PRI_READ_RESERVATION: return core_scsi3_pri_read_reservation(cmd); case PRI_REPORT_CAPABILITIES: return core_scsi3_pri_report_capabilities(cmd); case PRI_READ_FULL_STATUS: return core_scsi3_pri_read_full_status(cmd); default: printk(KERN_ERR "Unknown PERSISTENT_RESERVE_IN service" " action: 0x%02x\n", cdb[1] & 0x1f); return PYX_TRANSPORT_INVALID_CDB_FIELD; } } int core_scsi3_emulate_pr(struct se_cmd *cmd) { unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; struct se_device *dev = cmd->se_dev; /* * Following spc2r20 5.5.1 Reservations overview: * * If a logical unit has been reserved by any RESERVE command and is * still reserved by any initiator, all PERSISTENT RESERVE IN and all * PERSISTENT RESERVE OUT commands shall conflict regardless of * initiator or service action and shall terminate with a RESERVATION * CONFLICT status. */ if (dev->dev_flags & DF_SPC2_RESERVATIONS) { printk(KERN_ERR "Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); return PYX_TRANSPORT_RESERVATION_CONFLICT; } return (cdb[0] == PERSISTENT_RESERVE_OUT) ? core_scsi3_emulate_pr_out(cmd, cdb) : core_scsi3_emulate_pr_in(cmd, cdb); } static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type) { return 0; } static int core_pt_seq_non_holder( struct se_cmd *cmd, unsigned char *cdb, u32 pr_reg_type) { return 0; } int core_setup_reservations(struct se_device *dev, int force_pt) { struct se_subsystem_dev *su_dev = dev->se_sub_dev; struct t10_reservation_template *rest = &su_dev->t10_reservation; /* * If this device is from Target_Core_Mod/pSCSI, use the reservations * of the Underlying SCSI hardware. In Linux/SCSI terms, this can * cause a problem because libata and some SATA RAID HBAs appear * under Linux/SCSI, but to emulate reservations themselves. */ if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) && !(DEV_ATTRIB(dev)->emulate_reservations)) || force_pt) { rest->res_type = SPC_PASSTHROUGH; rest->pr_ops.t10_reservation_check = &core_pt_reservation_check; rest->pr_ops.t10_seq_non_holder = &core_pt_seq_non_holder; printk(KERN_INFO "%s: Using SPC_PASSTHROUGH, no reservation" " emulation\n", TRANSPORT(dev)->name); return 0; } /* * If SPC-3 or above is reported by real or emulated struct se_device, * use emulated Persistent Reservations. */ if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) { rest->res_type = SPC3_PERSISTENT_RESERVATIONS; rest->pr_ops.t10_reservation_check = &core_scsi3_pr_reservation_check; rest->pr_ops.t10_seq_non_holder = &core_scsi3_pr_seq_non_holder; printk(KERN_INFO "%s: Using SPC3_PERSISTENT_RESERVATIONS" " emulation\n", TRANSPORT(dev)->name); } else { rest->res_type = SPC2_RESERVATIONS; rest->pr_ops.t10_reservation_check = &core_scsi2_reservation_check; rest->pr_ops.t10_seq_non_holder = &core_scsi2_reservation_seq_non_holder; printk(KERN_INFO "%s: Using SPC2_RESERVATIONS emulation\n", TRANSPORT(dev)->name); } return 0; }