1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
/* linux/arch/arm/mach-exynos/setup-sdhci.c
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *exynos4_hsmmc_clksrcs[4] = {
[0] = NULL,
[1] = NULL,
[2] = "sclk_mmc", /* mmc_bus */
[3] = NULL,
};
void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
struct mmc_ios *ios, struct mmc_card *card)
{
u32 ctrl2, ctrl3;
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
/* don't need to alter anything according to card-type */
ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
/* select base clock source to HCLK */
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
/*
* clear async mode, enable conflict mask, rx feedback ctrl, SD
* clk hold and no use debounce count
*/
ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
S3C_SDHCI_CTRL2_ENFBCLKRX |
S3C_SDHCI_CTRL2_DFCNT_NONE |
S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
#if defined(CONFIG_MACH_M0) || defined(CONFIG_MACH_C1_USA_ATT) || \
defined(CONFIG_MACH_T0) || defined(CONFIG_MACH_M3)
/* set 2ns delay for TX. This setting is just for wifi sdio i/f of
M0 and his brother projects. */
if (pdata->pm_flags == S3C_SDHCI_PM_IGNORE_SUSPEND_RESUME &&
(ios->clock >= 25 * 1000000)) {
/* to distinguish tflash and sdio i/f, it checks pm_flags's
value. This way only can be applied to Braodcom
wifi module. */
ctrl2 |= S3C_SDHCI_CTRL2_ENFBCLKTX;
}
#endif
/* Tx and Rx feedback clock delay control */
if (ios->clock < 25 * 1000000)
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
S3C_SDHCI_CTRL3_FCSEL2 |
S3C_SDHCI_CTRL3_FCSEL1 |
S3C_SDHCI_CTRL3_FCSEL0);
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
S3C_SDHCI_CTRL3_FCSEL2 |
S3C_SDHCI_CTRL3_FCSEL1 |
S3C_SDHCI_CTRL3_FCSEL0);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
|
