path: root/drivers/video/tridentfb.c

/*
 * Frame buffer driver for Trident Blade and Image series
 *
 * Copyright 2001,2002 - Jani Monoses   <jani@iv.ro>
 *
 *
 * CREDITS:(in order of appearance)
 * 	skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
 * 	Special thanks ;) to Mattia Crivellini <tia@mclink.it>
 * 	much inspired by the XFree86 4.x Trident driver sources by Alan Hourihane
 * 	the FreeVGA project
 *	Francesco Salvestrini <salvestrini@users.sf.net> XP support,code,suggestions
 * TODO:
 * 	timing value tweaking so it looks good on every monitor in every mode
 *	TGUI acceleration	
 */

#include <linux/module.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>

#include <linux/delay.h>
#include <video/trident.h>

#define VERSION		"0.7.8-NEWAPI"

struct tridentfb_par {
	int vclk;		//in MHz
	void __iomem * io_virt;	//iospace virtual memory address
};

static unsigned char eng_oper;		//engine operation...
static struct fb_ops tridentfb_ops;

static struct tridentfb_par default_par;

/* FIXME:kmalloc these 3 instead */
static struct fb_info fb_info;
static u32 pseudo_pal[16];


static struct fb_var_screeninfo default_var;

static struct fb_fix_screeninfo tridentfb_fix = {
	.id = "Trident",	
	.type = FB_TYPE_PACKED_PIXELS,
	.ypanstep = 1,
	.visual = FB_VISUAL_PSEUDOCOLOR,
	.accel = FB_ACCEL_NONE,
};

static int chip_id;

static int defaultaccel;
static int displaytype;


/* defaults which are normally overriden by user values */

/* video mode */
static char * mode = "640x480";
static int bpp = 8;

static int noaccel;

static int center;
static int stretch;

static int fp;
static int crt;

static int memsize;
static int memdiff;
static int nativex;


module_param(mode, charp, 0);
module_param(bpp, int, 0);
module_param(center, int, 0);
module_param(stretch, int, 0);
module_param(noaccel, int, 0);
module_param(memsize, int, 0);
module_param(memdiff, int, 0);
module_param(nativex, int, 0);
module_param(fp, int, 0);
module_param(crt, int, 0);


static int chip3D;
static int chipcyber;

static int is3Dchip(int id)
{
	return 	((id == BLADE3D) || (id == CYBERBLADEE4) ||
		 (id == CYBERBLADEi7) || (id == CYBERBLADEi7D) ||
		 (id == CYBER9397) || (id == CYBER9397DVD) ||
		 (id == CYBER9520) || (id == CYBER9525DVD) ||
		 (id == IMAGE975) || (id == IMAGE985) ||
		 (id == CYBERBLADEi1) || (id == CYBERBLADEi1D) ||
		 (id ==	CYBERBLADEAi1) || (id == CYBERBLADEAi1D) ||
		 (id ==	CYBERBLADEXPm8) || (id == CYBERBLADEXPm16) ||
		 (id ==	CYBERBLADEXPAi1));
}

static int iscyber(int id)
{
	switch (id) {
		case CYBER9388:		
		case CYBER9382:
		case CYBER9385:
		case CYBER9397:
		case CYBER9397DVD:
		case CYBER9520:
		case CYBER9525DVD:
		case CYBERBLADEE4:
		case CYBERBLADEi7D:
		case CYBERBLADEi1:
		case CYBERBLADEi1D: 
		case CYBERBLADEAi1: 
		case CYBERBLADEAi1D:
		case CYBERBLADEXPAi1:
			return 1;
		
		case CYBER9320:
		case TGUI9660:     
		case IMAGE975:
		case IMAGE985:
		case BLADE3D:
		case CYBERBLADEi7: /* VIA MPV4 integrated version */

		default:
			/* case CYBERBLDAEXPm8:	 Strange */
			/* case CYBERBLDAEXPm16: Strange */
			return 0;
	}
}

#define CRT 0x3D0		//CRTC registers offset for color display

#ifndef TRIDENT_MMIO
	#define TRIDENT_MMIO 1
#endif

#if TRIDENT_MMIO
	#define t_outb(val,reg)	writeb(val,((struct tridentfb_par *)(fb_info.par))->io_virt + reg)
	#define t_inb(reg)	readb(((struct tridentfb_par*)(fb_info.par))->io_virt + reg)
#else
	#define t_outb(val,reg) outb(val,reg)
	#define t_inb(reg) inb(reg)
#endif


static struct accel_switch {
	void (*init_accel)(int,int);
	void (*wait_engine)(void);
	void (*fill_rect)(__u32,__u32,__u32,__u32,__u32,__u32);
	void (*copy_rect)(__u32,__u32,__u32,__u32,__u32,__u32);
} *acc;

#define writemmr(r,v)	writel(v, ((struct tridentfb_par *)fb_info.par)->io_virt + r)
#define readmmr(r)	readl(((struct tridentfb_par *)fb_info.par)->io_virt + r)



/*
 * Blade specific acceleration.
 */

#define point(x,y) ((y)<<16|(x))
#define STA	0x2120
#define CMD	0x2144
#define ROP	0x2148
#define CLR	0x2160
#define SR1	0x2100
#define SR2	0x2104
#define DR1	0x2108
#define DR2	0x210C

#define ROP_S	0xCC

static void blade_init_accel(int pitch,int bpp)
{
	int v1 = (pitch>>3)<<20;
	int tmp = 0,v2;
	switch (bpp) {
		case 8:tmp = 0;break;
		case 15:tmp = 5;break;
		case 16:tmp = 1;break;
		case 24:
		case 32:tmp = 2;break;
	}
	v2 = v1 | (tmp<<29);
	writemmr(0x21C0,v2);
	writemmr(0x21C4,v2);
	writemmr(0x21B8,v2);
	writemmr(0x21BC,v2);
	writemmr(0x21D0,v1);
	writemmr(0x21D4,v1);
	writemmr(0x21C8,v1);
	writemmr(0x21CC,v1);
	writemmr(0x216C,0);
}

static void blade_wait_engine(void)
{
	while(readmmr(STA) & 0xFA800000);
}

static void blade_fill_rect(__u32 x,__u32 y,__u32 w,__u32 h,__u32 c,__u32 rop)
{
	writemmr(CLR,c);
	writemmr(ROP,rop ? 0x66:ROP_S);
	writemmr(CMD,0x20000000|1<<19|1<<4|2<<2);

	writemmr(DR1,point(x,y));
	writemmr(DR2,point(x+w-1,y+h-1));
}

static void blade_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
{
	__u32 s1,s2,d1,d2;
	int direction = 2;
	s1 = point(x1,y1);
	s2 = point(x1+w-1,y1+h-1);
	d1 = point(x2,y2);
	d2 = point(x2+w-1,y2+h-1);

	if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
			direction = 0;


	writemmr(ROP,ROP_S);
	writemmr(CMD,0xE0000000|1<<19|1<<4|1<<2|direction);

	writemmr(SR1,direction?s2:s1);
	writemmr(SR2,direction?s1:s2);
	writemmr(DR1,direction?d2:d1);
	writemmr(DR2,direction?d1:d2);
}

static struct accel_switch accel_blade = {
	blade_init_accel,
	blade_wait_engine,
	blade_fill_rect,
	blade_copy_rect,
};


/*
 * BladeXP specific acceleration functions
 */

#define ROP_P 0xF0
#define masked_point(x,y) ((y & 0xffff)<<16|(x & 0xffff))

static void xp_init_accel(int pitch,int bpp)
{
	int tmp = 0,v1;
	unsigned char x = 0;

	switch (bpp) {
		case 8:  x = 0; break;
		case 16: x = 1; break;
		case 24: x = 3; break;
		case 32: x = 2; break;
	}

	switch (pitch << (bpp >> 3)) {
		case 8192:
		case 512:  x |= 0x00; break;
		case 1024: x |= 0x04; break;
		case 2048: x |= 0x08; break;
		case 4096: x |= 0x0C; break;
	}

	t_outb(x,0x2125);

	eng_oper = x | 0x40;

	switch (bpp) {
		case 8:  tmp = 18; break;
		case 15:
		case 16: tmp = 19; break;
		case 24:
		case 32: tmp = 20; break;
	}

	v1 = pitch << tmp;

	writemmr(0x2154,v1);
	writemmr(0x2150,v1);
	t_outb(3,0x2126);
}

static void xp_wait_engine(void)
{
	int busy;
	int count, timeout;

	count = 0;
	timeout = 0;
	for (;;) {
		busy = t_inb(STA) & 0x80;
		if (busy != 0x80)
			return;
		count++;
		if (count == 10000000) {
			/* Timeout */
			count = 9990000;
			timeout++;
			if (timeout == 8) {
				/* Reset engine */
				t_outb(0x00, 0x2120);
				return;
			}
		}
	}
}

static void xp_fill_rect(__u32 x,__u32 y,__u32 w,__u32 h,__u32 c,__u32 rop)
{
	writemmr(0x2127,ROP_P);
	writemmr(0x2158,c);
	writemmr(0x2128,0x4000);
	writemmr(0x2140,masked_point(h,w));
	writemmr(0x2138,masked_point(y,x));
	t_outb(0x01,0x2124);
        t_outb(eng_oper,0x2125);
}

static void xp_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
{
	int direction;
	__u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;

	direction = 0x0004;
	
	if ((x1 < x2) && (y1 == y2)) {
		direction |= 0x0200;
		x1_tmp = x1 + w - 1;
		x2_tmp = x2 + w - 1;
	} else {
		x1_tmp = x1;
		x2_tmp = x2;
	}
  
	if (y1 < y2) {
		direction |= 0x0100;
		y1_tmp = y1 + h - 1;
		y2_tmp = y2 + h - 1;
  	} else {
		y1_tmp = y1;
		y2_tmp = y2;
	}

	writemmr(0x2128,direction);	
	t_outb(ROP_S,0x2127);
	writemmr(0x213C,masked_point(y1_tmp,x1_tmp));
	writemmr(0x2138,masked_point(y2_tmp,x2_tmp));
	writemmr(0x2140,masked_point(h,w));
	t_outb(0x01,0x2124);
}

static struct accel_switch accel_xp = {
  	xp_init_accel,
	xp_wait_engine,
	xp_fill_rect,
	xp_copy_rect,
};


/*
 * Image specific acceleration functions
 */
static void image_init_accel(int pitch,int bpp)
{
	int tmp = 0;
   	switch (bpp) {
		case 8:tmp = 0;break;
		case 15:tmp = 5;break;
		case 16:tmp = 1;break;
		case 24:
		case 32:tmp = 2;break;
	}
	writemmr(0x2120, 0xF0000000);
	writemmr(0x2120, 0x40000000|tmp);
	writemmr(0x2120, 0x80000000);
	writemmr(0x2144, 0x00000000);
	writemmr(0x2148, 0x00000000);
	writemmr(0x2150, 0x00000000);
	writemmr(0x2154, 0x00000000);
	writemmr(0x2120, 0x60000000|(pitch<<16) |pitch);
	writemmr(0x216C, 0x00000000);
	writemmr(0x2170, 0x00000000);
	writemmr(0x217C, 0x00000000);
	writemmr(0x2120, 0x10000000);
	writemmr(0x2130, (2047 << 16) | 2047);
}

static void image_wait_engine(void)
{
	while(readmmr(0x2164) & 0xF0000000);
}

static void image_fill_rect(__u32 x, __u32 y, __u32 w, __u32 h, __u32 c, __u32 rop)
{
	writemmr(0x2120,0x80000000);
	writemmr(0x2120,0x90000000|ROP_S);

	writemmr(0x2144,c);

	writemmr(DR1,point(x,y));
	writemmr(DR2,point(x+w-1,y+h-1));

	writemmr(0x2124,0x80000000|3<<22|1<<10|1<<9);
}

static void image_copy_rect(__u32 x1,__u32 y1,__u32 x2,__u32 y2,__u32 w,__u32 h)
{
	__u32 s1,s2,d1,d2;
	int direction = 2;
	s1 = point(x1,y1);
	s2 = point(x1+w-1,y1+h-1);
	d1 = point(x2,y2);
	d2 = point(x2+w-1,y2+h-1);

	if ((y1 > y2) || ((y1 == y2) && (x1 >x2)))
			direction = 0;

	writemmr(0x2120,0x80000000);
	writemmr(0x2120,0x90000000|ROP_S);

	writemmr(SR1,direction?s2:s1);
	writemmr(SR2,direction?s1:s2);
	writemmr(DR1,direction?d2:d1);
	writemmr(DR2,direction?d1:d2);
	writemmr(0x2124,0x80000000|1<<22|1<<10|1<<7|direction);
}


static struct accel_switch accel_image = {
	image_init_accel,
	image_wait_engine,
	image_fill_rect,
	image_copy_rect,
};

/*
 * Accel functions called by the upper layers
 */
#ifdef CONFIG_FB_TRIDENT_ACCEL
static void tridentfb_fillrect(struct fb_info * info, const struct fb_fillrect *fr)
{
	int bpp = info->var.bits_per_pixel;
	int col = 0;
	
	switch (bpp) {
		default:
		case 8: col |= fr->color;
			col |= col << 8;
			col |= col << 16;
			break;
		case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
			
			 break;
		case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
			 break;
	}		 
			
	acc->fill_rect(fr->dx, fr->dy, fr->width, fr->height, col, fr->rop);
	acc->wait_engine();
}
static void tridentfb_copyarea(struct fb_info *info, const struct fb_copyarea *ca)
{
	acc->copy_rect(ca->sx,ca->sy,ca->dx,ca->dy,ca->width,ca->height);
	acc->wait_engine();
}
#else /* !CONFIG_FB_TRIDENT_ACCEL */
#define tridentfb_fillrect cfb_fillrect
#define tridentfb_copyarea cfb_copyarea
#endif /* CONFIG_FB_TRIDENT_ACCEL */


/*
 * Hardware access functions
 */

static inline unsigned char read3X4(int reg)
{
	struct tridentfb_par * par = (struct tridentfb_par *)fb_info.par;
	writeb(reg, par->io_virt + CRT + 4);
	return readb( par->io_virt + CRT + 5);
}

static inline void write3X4(int reg, unsigned char val)
{
	struct tridentfb_par * par = (struct tridentfb_par *)fb_info.par;
	writeb(reg, par->io_virt + CRT + 4);
	writeb(val, par->io_virt + CRT + 5);
}

static inline unsigned char read3C4(int reg)
{
	t_outb(reg, 0x3C4);
	return t_inb(0x3C5);
}

static inline void write3C4(int reg, unsigned char val)
{
	t_outb(reg, 0x3C4);
	t_outb(val, 0x3C5);
}

static inline unsigned char read3CE(int reg)
{
	t_outb(reg, 0x3CE);
	return t_inb(0x3CF);
}

static inline void writeAttr(int reg, unsigned char val)
{
	readb(((struct tridentfb_par *)fb_info.par)->io_virt + CRT + 0x0A);	//flip-flop to index
	t_outb(reg, 0x3C0);
	t_outb(val, 0x3C0);
}

static inline void write3CE(int reg, unsigned char val)
{
	t_outb(reg, 0x3CE);
	t_outb(val, 0x3CF);
}

static inline void enable_mmio(void)
{
	/* Goto New Mode */
	outb(0x0B, 0x3C4);
	inb(0x3C5);

	/* Unprotect registers */
	outb(NewMode1, 0x3C4);
	outb(0x80, 0x3C5);
  
	/* Enable MMIO */
	outb(PCIReg, 0x3D4); 
	outb(inb(0x3D5) | 0x01, 0x3D5);
}


#define crtc_unlock()	write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)

/*  Return flat panel's maximum x resolution */
static int __devinit get_nativex(void)
{
	int x,y,tmp;

	if (nativex)
		return nativex;

       	tmp = (read3CE(VertStretch) >> 4) & 3;

	switch (tmp) {
		case 0: x = 1280; y = 1024; break;
		case 2: x = 1024; y = 768;  break;
		case 3: x = 800;  y = 600;  break; 
		case 4: x = 1400; y = 1050; break;
		case 1: 
		default:x = 640;  y = 480;  break;
	}

	output("%dx%d flat panel found\n", x, y);
	return x;
}

/* Set pitch */
static void set_lwidth(int width)
{
	write3X4(Offset, width & 0xFF);
	write3X4(AddColReg, (read3X4(AddColReg) & 0xCF) | ((width & 0x300) >>4));
}

/* For resolutions smaller than FP resolution stretch */
static void screen_stretch(void)
{
  	if (chip_id != CYBERBLADEXPAi1)
  		write3CE(BiosReg,0);
  	else
  		write3CE(BiosReg,8);
	write3CE(VertStretch,(read3CE(VertStretch) & 0x7C) | 1);
	write3CE(HorStretch,(read3CE(HorStretch) & 0x7C) | 1);
}

/* For resolutions smaller than FP resolution center */
static void screen_center(void)
{
	write3CE(VertStretch,(read3CE(VertStretch) & 0x7C) | 0x80);
	write3CE(HorStretch,(read3CE(HorStretch) & 0x7C) | 0x80);
}

/* Address of first shown pixel in display memory */
static void set_screen_start(int base)
{
	write3X4(StartAddrLow, base & 0xFF);
	write3X4(StartAddrHigh, (base & 0xFF00) >> 8);
	write3X4(CRTCModuleTest, (read3X4(CRTCModuleTest) & 0xDF) | ((base & 0x10000) >> 11));
	write3X4(CRTHiOrd, (read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
}

/* Use 20.12 fixed-point for NTSC value and frequency calculation */
#define calc_freq(n,m,k)  ( ((unsigned long)0xE517 * (n+8) / ((m+2)*(1<<k))) >> 12 )

/* Set dotclock frequency */
static void set_vclk(int freq)
{
	int m,n,k;
	int f,fi,d,di;
	unsigned char lo=0,hi=0;

	d = 20;
	for(k = 2;k>=0;k--)
	for(m = 0;m<63;m++)
	for(n = 0;n<128;n++) {
		fi = calc_freq(n,m,k);
		if ((di = abs(fi - freq)) < d) {
			d = di;
			f = fi;
			lo = n;
			hi = (k<<6) | m;
		}
	}
	if (chip3D) {
		write3C4(ClockHigh,hi);
		write3C4(ClockLow,lo);
	} else {
		outb(lo,0x43C8);
		outb(hi,0x43C9);
	}
	debug("VCLK = %X %X\n",hi,lo);
}

/* Set number of lines for flat panels*/
static void set_number_of_lines(int lines)
{
	int tmp = read3CE(CyberEnhance) & 0x8F;
	if (lines > 1024)
		tmp |= 0x50;
	else if (lines > 768)
		tmp |= 0x30;
	else if (lines > 600)
		tmp |= 0x20;
	else if (lines > 480)
		tmp |= 0x10;
	write3CE(CyberEnhance, tmp);
}

/*
 * If we see that FP is active we assume we have one.
 * Otherwise we have a CRT display.User can override.
 */
static unsigned int __devinit get_displaytype(void)
{
	if (fp)
		return DISPLAY_FP;
	if (crt || !chipcyber)
		return DISPLAY_CRT;
	return (read3CE(FPConfig) & 0x10)?DISPLAY_FP:DISPLAY_CRT;
}

/* Try detecting the video memory size */
static unsigned int __devinit get_memsize(void)
{
	unsigned char tmp, tmp2;
	unsigned int k;

	/* If memory size provided by user */
	if (memsize)
		k = memsize * Kb;
	else
	switch (chip_id) {
		case CYBER9525DVD:    k = 2560 * Kb; break;
		default:
			tmp = read3X4(SPR) & 0x0F;
			switch (tmp) {

				case 0x01: k = 512;     break;
				case 0x02: k = 6 * Mb;  break; /* XP */
				case 0x03: k = 1 * Mb;  break;
				case 0x04: k = 8 * Mb;  break;
				case 0x06: k = 10 * Mb; break; /* XP */
				case 0x07: k = 2 * Mb;  break;
				case 0x08: k = 12 * Mb; break; /* XP */
				case 0x0A: k = 14 * Mb; break; /* XP */
				case 0x0C: k = 16 * Mb; break; /* XP */
				case 0x0E:                     /* XP */
  
					tmp2 = read3C4(0xC1);
					switch (tmp2) {
						case 0x00: k = 20 * Mb; break;
						case 0x01: k = 24 * Mb; break;
						case 0x10: k = 28 * Mb; break;
						case 0x11: k = 32 * Mb; break;
						default:   k = 1 * Mb;  break;
					}
				break;
	
				case 0x0F: k = 4 * Mb; break;
				default:   k = 1 * Mb;
			}
	}

	k -= memdiff * Kb;
	output("framebuffer size = %d Kb\n", k/Kb);
	return k;
}

/* See if we can handle the video mode described in var */
static int tridentfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
	int bpp = var->bits_per_pixel;
	debug("enter\n");

	/* check color depth */
	if (bpp == 24 )
		bpp = var->bits_per_pixel = 32;
	/* check whether resolution fits on panel and in memory*/
	if (flatpanel && nativex && var->xres > nativex)
		return -EINVAL;
	if (var->xres * var->yres_virtual * bpp/8 > info->fix.smem_len)
		return -EINVAL;

	switch (bpp) {
		case 8:
			var->red.offset = 0;
			var->green.offset = 0;
			var->blue.offset = 0;
			var->red.length = 6;
			var->green.length = 6;
			var->blue.length = 6;
			break;
		case 16:
			var->red.offset = 11;
			var->green.offset = 5;
			var->blue.offset = 0;
			var->red.length = 5;
			var->green.length = 6;
			var->blue.length = 5;
			break;
		case 32:
			var->red.offset = 16;
			var->green.offset = 8;
			var->blue.offset = 0;
			var->red.length = 8;
			var->green.length = 8;
			var->blue.length = 8;
			break;
		default:
			return -EINVAL;	
	}
	debug("exit\n");

	return 0;

}
/* Pan the display */
static int tridentfb_pan_display(struct fb_var_screeninfo *var,
				   struct fb_info *info)
{
	unsigned int offset;

	debug("enter\n");
	offset = (var->xoffset + (var->yoffset * var->xres))
			* var->bits_per_pixel/32;
	info->var.xoffset = var->xoffset;
	info->var.yoffset = var->yoffset;
	set_screen_start(offset);
	debug("exit\n");
	return 0;
}

#define shadowmode_on()  write3CE(CyberControl,read3CE(CyberControl) | 0x81)
#define shadowmode_off() write3CE(CyberControl,read3CE(CyberControl) & 0x7E)

/* Set the hardware to the requested video mode */
static int tridentfb_set_par(struct fb_info *info)
{
	struct tridentfb_par * par = (struct tridentfb_par *)(info->par);
	u32	htotal,hdispend,hsyncstart,hsyncend,hblankstart,hblankend,
		vtotal,vdispend,vsyncstart,vsyncend,vblankstart,vblankend;
	struct fb_var_screeninfo *var = &info->var;	
	int bpp = var->bits_per_pixel;
	unsigned char tmp;
	debug("enter\n");
	htotal = (var->xres + var->left_margin + var->right_margin + var->hsync_len)/8 - 10;
	hdispend = var->xres/8 - 1;
	hsyncstart = (var->xres + var->right_margin)/8;
	hsyncend = var->hsync_len/8;
	hblankstart = hdispend + 1;
	hblankend = htotal + 5;

	vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len - 2;
	vdispend = var->yres - 1;
	vsyncstart = var->yres + var->lower_margin;
	vsyncend = var->vsync_len;
	vblankstart = var->yres;
	vblankend = vtotal + 2;

	enable_mmio();
	crtc_unlock();
	write3CE(CyberControl,8);

	if (flatpanel && var->xres < nativex) {
		/*
		 * on flat panels with native size larger
		 * than requested resolution decide whether
		 * we stretch or center
		 */
		t_outb(0xEB,0x3C2);

		shadowmode_on();

		if (center) 
			screen_center();
		else if (stretch)
			screen_stretch();

	} else {
		t_outb(0x2B,0x3C2);
		write3CE(CyberControl,8);
	}

	/* vertical timing values */
	write3X4(CRTVTotal, vtotal & 0xFF);
	write3X4(CRTVDispEnd, vdispend & 0xFF);
	write3X4(CRTVSyncStart, vsyncstart & 0xFF);
	write3X4(CRTVSyncEnd, (vsyncend & 0x0F));
	write3X4(CRTVBlankStart, vblankstart & 0xFF);
	write3X4(CRTVBlankEnd, 0/*p->vblankend & 0xFF*/);

	/* horizontal timing values */
	write3X4(CRTHTotal, htotal & 0xFF);
	write3X4(CRTHDispEnd, hdispend & 0xFF);
	write3X4(CRTHSyncStart, hsyncstart & 0xFF);
	write3X4(CRTHSyncEnd, (hsyncend & 0x1F) | ((hblankend & 0x20)<<2));
	write3X4(CRTHBlankStart, hblankstart & 0xFF);
	write3X4(CRTHBlankEnd, 0/*(p->hblankend & 0x1F)*/);

	/* higher bits of vertical timing values */
	tmp = 0x10;
	if (vtotal & 0x100) tmp |= 0x01;
	if (vdispend & 0x100) tmp |= 0x02;
	if (vsyncstart & 0x100) tmp |= 0x04;
	if (vblankstart & 0x100) tmp |= 0x08;

	if (vtotal & 0x200) tmp |= 0x20;
	if (vdispend & 0x200) tmp |= 0x40;
	if (vsyncstart & 0x200) tmp |= 0x80;
	write3X4(CRTOverflow, tmp);

	tmp = read3X4(CRTHiOrd) | 0x08;	//line compare bit 10
	if (vtotal & 0x400) tmp |= 0x80;
	if (vblankstart & 0x400) tmp |= 0x40;
	if (vsyncstart & 0x400) tmp |= 0x20;
	if (vdispend & 0x400) tmp |= 0x10;
	write3X4(CRTHiOrd, tmp);

	tmp = 0;
	if (htotal & 0x800) tmp |= 0x800 >> 11;
	if (hblankstart & 0x800) tmp |= 0x800 >> 7;
	write3X4(HorizOverflow, tmp);
	
	tmp = 0x40;
	if (vblankstart & 0x200) tmp |= 0x20;
//FIXME	if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80;  //double scan for 200 line modes
	write3X4(CRTMaxScanLine, tmp);

	write3X4(CRTLineCompare,0xFF);
	write3X4(CRTPRowScan,0);
	write3X4(CRTModeControl,0xC3);

	write3X4(LinearAddReg,0x20);	//enable linear addressing

	tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84:0x80;
	write3X4(CRTCModuleTest,tmp);	//enable access extended memory

	write3X4(GraphEngReg, 0x80);	//enable GE for text acceleration

#ifdef CONFIG_FB_TRIDENT_ACCEL	
	acc->init_accel(info->var.xres,bpp);
#endif
	
	switch (bpp) {
		case 8:  tmp = 0x00; break;
		case 16: tmp = 0x05; break;
		case 24: tmp = 0x29; break;
		case 32: tmp = 0x09; 
	}

	write3X4(PixelBusReg, tmp);

	tmp = 0x10;
	if (chipcyber)
	    tmp |= 0x20;
	write3X4(DRAMControl, tmp);	//both IO,linear enable

	write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
	write3X4(Performance,0x92);
	write3X4(PCIReg,0x07);		//MMIO & PCI read and write burst enable

	/* convert from picoseconds to MHz */
	par->vclk = 1000000/info->var.pixclock;
	if (bpp == 32)
		par->vclk *=2;
	set_vclk(par->vclk);

	write3C4(0,3);
	write3C4(1,1);		//set char clock 8 dots wide
	write3C4(2,0x0F);	//enable 4 maps because needed in chain4 mode
	write3C4(3,0);
	write3C4(4,0x0E);	//memory mode enable bitmaps ??

	write3CE(MiscExtFunc,(bpp==32)?0x1A:0x12);	//divide clock by 2 if 32bpp
							//chain4 mode display and CPU path
	write3CE(0x5,0x40);	//no CGA compat,allow 256 col
	write3CE(0x6,0x05);	//graphics mode
	write3CE(0x7,0x0F);	//planes?

	if (chip_id == CYBERBLADEXPAi1) {
		/* This fixes snow-effect in 32 bpp */
		write3X4(CRTHSyncStart,0x84);
	}

	writeAttr(0x10,0x41);	//graphics mode and support 256 color modes
	writeAttr(0x12,0x0F);	//planes
	writeAttr(0x13,0);	//horizontal pel panning

	//colors
	for(tmp = 0;tmp < 0x10;tmp++)
		writeAttr(tmp,tmp);
	readb(par->io_virt + CRT + 0x0A);	//flip-flop to index
	t_outb(0x20, 0x3C0);			//enable attr

	switch (bpp) {
		case 8:	tmp = 0;break;		//256 colors
		case 15: tmp = 0x10;break;
		case 16: tmp = 0x30;break;	//hicolor
		case 24: 			//truecolor
		case 32: tmp = 0xD0;break;
	}

	t_inb(0x3C8);
	t_inb(0x3C6);
	t_inb(0x3C6);
	t_inb(0x3C6);
	t_inb(0x3C6);
	t_outb(tmp,0x3C6);
	t_inb(0x3C8);

	if (flatpanel)
		set_number_of_lines(info->var.yres);
	set_lwidth(info->var.xres * bpp/(4*16));
	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
	info->fix.line_length = info->var.xres * (bpp >> 3);  
	info->cmap.len = (bpp == 8) ? 256: 16;
	debug("exit\n");
	return 0;
}

/* Set one color register */
static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
				 unsigned blue, unsigned transp,
				 struct fb_info *info)
{
	int bpp = info->var.bits_per_pixel;

	if (regno >= info->cmap.len)
		return 1;


	if (bpp==8) {
		t_outb(0xFF,0x3C6);
		t_outb(regno,0x3C8);

		t_outb(red>>10,0x3C9);
		t_outb(green>>10,0x3C9);
		t_outb(blue>>10,0x3C9);

	} else if (bpp == 16) {	/* RGB 565 */
		u32 col;

		col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
			((blue & 0xF800) >> 11);
		col |= col << 16;	
		((u32 *)(info->pseudo_palette))[regno] = col;
	} else if (bpp == 32)		/* ARGB 8888 */
		((u32*)info->pseudo_palette)[regno] =
			((transp & 0xFF00) <<16) 	|
			((red & 0xFF00) << 8) 		|
			((green & 0xFF00))		|
			((blue & 0xFF00)>>8);

//	debug("exit\n");
	return 0;
}

/* Try blanking the screen.For flat panels it does nothing */
static int tridentfb_blank(int blank_mode, struct fb_info *info)
{
	unsigned char PMCont,DPMSCont;

	debug("enter\n");
	if (flatpanel)
		return 0;
	t_outb(0x04,0x83C8); /* Read DPMS Control */
	PMCont = t_inb(0x83C6) & 0xFC;
	DPMSCont = read3CE(PowerStatus) & 0xFC;
	switch (blank_mode)
	{
	case FB_BLANK_UNBLANK:
		/* Screen: On, HSync: On, VSync: On */
	case FB_BLANK_NORMAL:
		/* Screen: Off, HSync: On, VSync: On */
		PMCont |= 0x03;
		DPMSCont |= 0x00;
		break;
	case FB_BLANK_HSYNC_SUSPEND:
		/* Screen: Off, HSync: Off, VSync: On */
		PMCont |= 0x02;
		DPMSCont |= 0x01;
		break;
	case FB_BLANK_VSYNC_SUSPEND:
		/* Screen: Off, HSync: On, VSync: Off */
		PMCont |= 0x02;
		DPMSCont |= 0x02;
		break;
	case FB_BLANK_POWERDOWN:
		/* Screen: Off, HSync: Off, VSync: Off */
		PMCont |= 0x00;
		DPMSCont |= 0x03;
		break;
    	}

	write3CE(PowerStatus,DPMSCont);
	t_outb(4,0x83C8);
	t_outb(PMCont,0x83C6);

	debug("exit\n");

	/* let fbcon do a softblank for us */
	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
}

static int __devinit trident_pci_probe(struct pci_dev * dev, const struct pci_device_id * id)
{
	int err;
	unsigned char revision;

	err = pci_enable_device(dev);
	if (err)
		return err;

	chip_id = id->device;

	if(chip_id == CYBERBLADEi1)
		output("*** Please do use cyblafb, Cyberblade/i1 support "
		       "will soon be removed from tridentfb!\n");


	/* If PCI id is 0x9660 then further detect chip type */
	
	if (chip_id == TGUI9660) {
		outb(RevisionID,0x3C4);
		revision = inb(0x3C5);	
	
		switch (revision) {
			case 0x22:
			case 0x23: chip_id = CYBER9397;break;
			case 0x2A: chip_id = CYBER9397DVD;break;
			case 0x30:
			case 0x33:
			case 0x34:
			case 0x35:
			case 0x38:
			case 0x3A:
			case 0xB3: chip_id = CYBER9385;break;
			case 0x40 ... 0x43: chip_id = CYBER9382;break;
			case 0x4A: chip_id = CYBER9388;break;
			default:break;	
		}
	}

	chip3D = is3Dchip(chip_id);
	chipcyber = iscyber(chip_id);

	if (is_xp(chip_id)) {
		acc = &accel_xp;
	} else 
	if (is_blade(chip_id)) {
		acc = &accel_blade;
	} else {
		acc = &accel_image;
	}

	/* acceleration is on by default for 3D chips */
	defaultaccel = chip3D && !noaccel;

	fb_info.par = &default_par;

	/* setup MMIO region */
	tridentfb_fix.mmio_start = pci_resource_start(dev,1);
	tridentfb_fix.mmio_len = chip3D ? 0x20000:0x10000;

	if (!request_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len, "tridentfb")) {
		debug("request_region failed!\n");
		return -1;
	}

	default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);

	if (!default_par.io_virt) {
		release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
		debug("ioremap failed\n");
		return -1;
	}

	enable_mmio();
	
	/* setup framebuffer memory */
	tridentfb_fix.smem_start = pci_resource_start(dev,0);
	tridentfb_fix.smem_len = get_memsize();
	
	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
		debug("request_mem_region failed!\n");
		return -1;
	}

	fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
		       			tridentfb_fix.smem_len);

	if (!fb_info.screen_base) {
		release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
		debug("ioremap failed\n");
		return -1;
	}

	output("%s board found\n", pci_name(dev));
#if 0	
	output("Trident board found : mem = %X,io = %X, mem_v = %X, io_v = %X\n",
		tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt);
#endif
	displaytype = get_displaytype();

	if(flatpanel)
		nativex = get_nativex();

	fb_info.fix = tridentfb_fix;
	fb_info.fbops = &tridentfb_ops;


	fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
#ifdef CONFIG_FB_TRIDENT_ACCEL
	fb_info.flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
#endif
	fb_info.pseudo_palette = pseudo_pal;

	if (!fb_find_mode(&default_var,&fb_info,mode,NULL,0,NULL,bpp))
		return -EINVAL;
	fb_alloc_cmap(&fb_info.cmap,256,0);
	if (defaultaccel && acc)
		default_var.accel_flags |= FB_ACCELF_TEXT;
	else
		default_var.accel_flags &= ~FB_ACCELF_TEXT;
	default_var.activate |= FB_ACTIVATE_NOW;
	fb_info.var = default_var;
	fb_info.device = &dev->dev;
	if (register_framebuffer(&fb_info) < 0) {
		printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
		return -EINVAL;
	}
	output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
	   fb_info.node, fb_info.fix.id,default_var.xres,
	   default_var.yres,default_var.bits_per_pixel);
	return 0;
}

static void __devexit trident_pci_remove(struct pci_dev * dev)
{
	struct tridentfb_par *par = (struct tridentfb_par*)fb_info.par;
	unregister_framebuffer(&fb_info);
	iounmap(par->io_virt);
	iounmap(fb_info.screen_base);
	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
	release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
}

/* List of boards that we are trying to support */
static struct pci_device_id trident_devices[] = {
	{PCI_VENDOR_ID_TRIDENT,	BLADE3D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEi7, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEi7D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEi1D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEAi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEAi1D, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEE4, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	TGUI9660, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	IMAGE975, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	IMAGE985, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9320, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9388, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9520, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9525DVD, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9397, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBER9397DVD, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEXPAi1, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEXPm8, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEXPm16, PCI_ANY_ID,PCI_ANY_ID,0,0,0},
	{0,}
};	
	
MODULE_DEVICE_TABLE(pci,trident_devices); 

static struct pci_driver tridentfb_pci_driver = {
	.name		= "tridentfb",
	.id_table	= trident_devices,
	.probe		= trident_pci_probe,
	.remove		= __devexit_p(trident_pci_remove)
};

/*
 * Parse user specified options (`video=trident:')
 * example:
 * 	video=trident:800x600,bpp=16,noaccel
 */
#ifndef MODULE
static int tridentfb_setup(char *options)
{
	char * opt;
	if (!options || !*options)
		return 0;
	while((opt = strsep(&options,",")) != NULL ) {
		if (!*opt) continue;
		if (!strncmp(opt,"noaccel",7))
			noaccel = 1;
		else if (!strncmp(opt,"fp",2))
			displaytype = DISPLAY_FP;
		else if (!strncmp(opt,"crt",3))
			displaytype = DISPLAY_CRT;
		else if (!strncmp(opt,"bpp=",4))
			bpp = simple_strtoul(opt+4,NULL,0);
		else if (!strncmp(opt,"center",6))
			center = 1;
		else if (!strncmp(opt,"stretch",7))
			stretch = 1;
		else if (!strncmp(opt,"memsize=",8))
			memsize = simple_strtoul(opt+8,NULL,0);
		else if (!strncmp(opt,"memdiff=",8))
			memdiff = simple_strtoul(opt+8,NULL,0);
		else if (!strncmp(opt,"nativex=",8))
			nativex = simple_strtoul(opt+8,NULL,0);
		else
			mode = opt;
	}
	return 0;
}
#endif

static int __init tridentfb_init(void)
{
#ifndef MODULE
	char *option = NULL;

	if (fb_get_options("tridentfb", &option))
		return -ENODEV;
	tridentfb_setup(option);
#endif
	output("Trident framebuffer %s initializing\n", VERSION);
	return pci_register_driver(&tridentfb_pci_driver);
}

static void __exit tridentfb_exit(void)
{
	pci_unregister_driver(&tridentfb_pci_driver);
}

static struct fb_ops tridentfb_ops = {
	.owner	= THIS_MODULE,
	.fb_setcolreg = tridentfb_setcolreg,
	.fb_pan_display = tridentfb_pan_display,
	.fb_blank = tridentfb_blank,
	.fb_check_var = tridentfb_check_var,
	.fb_set_par = tridentfb_set_par,
	.fb_fillrect = tridentfb_fillrect,
	.fb_copyarea= tridentfb_copyarea,
	.fb_imageblit = cfb_imageblit,
};

module_init(tridentfb_init);
module_exit(tridentfb_exit);

MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
MODULE_LICENSE("GPL");