move telephony specific parts back to device

4 files changed, 0 insertions, 220 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index 95f212c..64f1653 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -49,10 +49,6 @@
          config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
     <bool name="config_automatic_brightness_available">true</bool>
 
-    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
-         autodetected from the Configuration. -->
-    <bool name="config_showNavigationBar">false</bool>
-
     <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 zones as follows:
 
@@ -175,41 +171,6 @@
     <!-- Minimum screen brightness allowed by the power manager. -->
     <integer name="config_screenBrightnessDim">10</integer>
 
-    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
-         Please don't copy them, copy anything else. -->
-
-    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
-         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
-    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
-         before automatically restore the default connection.  Set -1 if the connection
-         does not require auto-restore. -->
-    <!-- the 6th element indicates boot-time dependency-met value. -->
-    <string-array translatable="false" name="networkAttributes">
-        <item>"wifi,1,1,1,-1,true"</item>
-        <item>"mobile,0,0,0,-1,true"</item>
-        <item>"mobile_mms,2,0,2,60000,true"</item>
-        <item>"mobile_supl,3,0,2,60000,true"</item>
-        <item>"mobile_dun,4,0,3,60000,true"</item>
-        <item>"mobile_hipri,5,0,3,60000,true"</item>
-        <item>"mobile_bluetooth,7,7,1,-1,true"</item>
-        <item>"wifi_p2p,13,1,0,-1,true"</item>
-    </string-array>
-
-    <!-- An Array of "[ConnectivityManager connectionType],
-         [# simultaneous connection types]"  -->
-    <string-array translatable="false" name="radioAttributes">
-        <item>"1,1"</item>
-        <item>"0,1"</item>
-        <item>"7,1"</item>
-    </string-array>
-
-    <!-- List of regexpressions describing the interface (if any) that represent tetherable
-         USB interfaces.  If the device doesn't want to support tething over USB this should
-         be empty.  An example would be "usb.*" -->
-    <string-array translatable="false" name="config_tether_usb_regexs">
-        <item>"rndis0"</item>
-    </string-array>
-
     <!-- List of regexpressions describing the interface (if any) that represent tetherable
          Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
          should be empty.  An example would be "softap.*" -->
@@ -224,16 +185,6 @@
         <item>"bnep\\d"</item>
     </string-array>
 
-    <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
-    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
-    <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
-    <integer-array translatable="false" name="config_tether_upstream_types">
-        <item>0</item>
-        <item>1</item>
-        <item>5</item>
-        <item>7</item>
-    </integer-array>
-
     <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
     <bool translatable="false" name="config_wifi_dual_band_support">true</bool>
 
@@ -301,28 +252,4 @@
         <item>10</item>
     </integer-array>
 
-    <!-- The default iface on which to monitor data use -->
-    <string name="config_datause_iface">pdp0</string>
-    
-    <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
-    <bool name="config_disableMenuKeyInLockScreen">true</bool>
-
-    <!-- Disable the home key unlock setting -->
-    <bool name="config_disableHomeUnlockSetting">false</bool>
-
-    <!-- Workaround for devices with broken keyboards -->
-    <bool name="config_forceDisableHardwareKeyboard">true</bool>
-
-    <!-- Hardware 'face' keys present on the device, stored as a bit field.
-         This integer should equal the sum of the corresponding value for each
-         of the following keys present:
-             1 - Home
-             2 - Back
-             4 - Menu
-             8 - Assistant (search)
-            16 - App switch
-         For example, a device with Home, Back and Menu keys would set this
-         config to 7. -->
-    <integer name="config_deviceHardwareKeys">7</integer>
-
 </resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
deleted file mode 100644
index e6eb4e4..0000000
--- a/overlay/frameworks/base/core/res/res/xml/power_profile.xml
+++ /dev/null
@@ -1,69 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-**
-** Copyright 2009, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License")
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<device name="Android">
-  <!-- All values are in mAh except as noted -->
-  <item name="none">0</item>
-  <item name="screen.on">49</item>
-  <item name="bluetooth.active">142</item>
-  <item name="bluetooth.on">0.3</item>
-  <item name="bluetooth.at">35690</item>
-  <item name="screen.full">260</item>
-  <item name="wifi.on">4</item>
-  <item name="wifi.active">120</item>
-  <item name="wifi.scan">220</item>
-  <item name="dsp.audio">88</item>
-  <item name="dsp.video">88</item>
-  <item name="radio.active">185</item>
-  <!-- The current consumed by the radio when it is scanning for a signal -->
-  <item name="radio.scanning">88</item>
-  <item name="gps.on">50</item>
-  <!-- Current consumed by the radio at different signal strengths, when paging -->
-  <array name="radio.on"> <!-- Strength 0 to BINS-1 -->
-      <value>3.4</value>
-      <value>3.4</value>
-  </array>
-  <!-- Different CPU speeds as reported in
-       /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state -->
-  <array name="cpu.speeds">
-      <value>200000</value>
-      <value>500000</value>
-      <value>800000</value>
-      <value>1000000</value>
-      <value>1200000</value>
-      <value>1400000</value>
-      <value>1600000</value>
-  </array>
-  <!-- Power consumption when CPU is idle -->
-  <item name="cpu.idle">1.4</item>
-  <!-- Power consumption due to wake lock held -->
-  <item name="cpu.awake">44</item>
-  <!-- Power consumption at different speeds -->
-  <array name="cpu.active">
-      <value>55.4</value>
-      <value>82.1</value>
-      <value>113.7</value>
-      <value>140.0</value>
-      <value>170.0</value>
-      <value>200.0</value>
-      <value>230.0</value>
-  </array>
-  <!-- This is the battery capacity in mAh -->
-  <item name="battery.capacity">1650</item>
-</device>
diff --git a/overlay/frameworks/base/core/res/res/xml/storage_list.xml b/overlay/frameworks/base/core/res/res/xml/storage_list.xml
deleted file mode 100644
index d9247c5..0000000
--- a/overlay/frameworks/base/core/res/res/xml/storage_list.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-**
-** Copyright 2011, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License")
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- The <device> element should contain one or more <storage> elements.
-     Exactly one of these should have the attribute primary="true".
-     This storage will be the primary external storage and should have mountPoint="/mnt/sdcard".
-     Each storage should have both a mountPoint and storageDescription attribute.
-     The following attributes are optional:
-
-        primary:    (boolean) this storage is the primary external storage
-        removable:  (boolean) this is removable storage (for example, a real SD card)
-        emulated:   (boolean) the storage is emulated via the FUSE sdcard daemon
-        mtpReserve: (integer) number of megabytes of storage MTP should reserve for free storage
-                     (used for emulated storage that is shared with system's data partition)
-
-      A storage should not have both emulated and removable set to true
--->
-
-<StorageList xmlns:android="http://schemas.android.com/apk/res/android">
-    <storage android:mountPoint="/storage/sdcard0"
-             android:storageDescription="@string/storage_internal"
-             android:primary="true"
-             android:emulated="true"
-             android:mtpReserve="100" />
-
-    <storage android:mountPoint="/storage/sdcard1"
-             android:storageDescription="@string/storage_sd_card"
-             android:primary="false"
-             android:removable="true"
-             android:allowMassStorage="true" />
-
-    <storage android:mountPoint="/storage/usbdisk0"
-             android:storageDescription="@string/storage_usb"
-             android:primary="false"
-             android:removable="true" />
-</StorageList>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
deleted file mode 100644
index 88851f7..0000000
--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ /dev/null
@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2011, The CyanogenMod Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds. -->
-<resources>
-    <!-- Control whether status bar should distinguish HSPA data icon form UMTS data icon on devices -->
-    <bool name="config_hspa_data_distinguishable">true</bool>
-</resources>
-