diff options
Diffstat (limited to 'hostapd/ChangeLog')
| -rw-r--r-- | hostapd/ChangeLog | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/hostapd/ChangeLog b/hostapd/ChangeLog index 47f2423..9fc05f7 100644 --- a/hostapd/ChangeLog +++ b/hostapd/ChangeLog @@ -1,5 +1,112 @@ ChangeLog for hostapd +2012-05-10 - v1.0 + * Add channel selection support in hostapd. See hostapd.conf. + * Add support for IEEE 802.11v Time Advertisement mechanism with UTC + TSF offset. See hostapd.conf for config info. + * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. + This allows the driver to use PS buffering of Deauthentication and + Disassociation frames when the STA is in power save sleep. Only + available with drivers that provide TX status events for Deauth/ + Disassoc frames (nl80211). + * Allow PMKSA caching to be disabled on the Authenticator. See + hostap.conf config parameter disable_pmksa_caching. + * atheros: Add support for IEEE 802.11w configuration. + * bsd: Add support for setting HT values in IFM_MMASK. + * Allow client isolation to be configured with ap_isolate. Client + isolation can be used to prevent low-level bridging of frames + between associated stations in the BSS. By default, this bridging + is allowed. + * Allow coexistance of HT BSSes with WEP/TKIP BSSes. + * Add require_ht config parameter, which can be used to configure + hostapd to reject association with any station that does not support + HT PHY. + * Add support for writing debug log to a file using "-f" option. Also + add relog CLI command to re-open the log file. + * Add bridge handling for WDS STA interfaces. By default they are + added to the configured bridge of the AP interface (if present), + but the user can also specify a separate bridge using cli command + wds_bridge. + * hostapd_cli: + - Add wds_bridge command for specifying bridge for WDS STA + interfaces. + - Add relog command for reopening log file. + - Send AP-STA-DISCONNECTED event when an AP disconnects a station + due to inactivity. + - Add wps_config ctrl_interface command for configuring AP. This + command can be used to configure the AP using the internal WPS + registrar. It works in the same way as new AP settings received + from an ER. + - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. + - Add command get version, that returns hostapd version string. + * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. + Use hostapd_cli ess_disassoc (STA addr) (URL) to send the + notification to the STA. + * Allow AP mode to disconnect STAs based on low ACK condition (when + the data connection is not working properly, e.g., due to the STA + going outside the range of the AP). Disabled by default, enable by + config option disassoc_low_ack. + * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad + config file. + * WPS: + - Send AP Settings as a wrapped Credential attribute to ctrl_iface + in WPS-NEW-AP-SETTINGS. + - Dispatch more WPS events through hostapd ctrl_iface. + - Add mechanism for indicating non-standard WPS errors. + - Change concurrent radio AP to use only one WPS UPnP instance. + - Add wps_check_pin command for processing PIN from user input. + UIs can use this command to process a PIN entered by a user and to + validate the checksum digit (if present). + - Add hostap_cli get_config command to display current AP config. + - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at + runtime and support dynamic AP PIN management. + - Disable AP PIN after 10 consecutive failures. Slow down attacks + on failures up to 10. + - Allow AP to start in Enrollee mode without AP PIN for probing, + to be compatible with Windows 7. + - Add Config Error into WPS-FAIL events to provide more info + to the user on how to resolve the issue. + - When controlling multiple interfaces: + - apply WPS commands to all interfaces configured to use WPS + - apply WPS config changes to all interfaces that use WPS + - when an attack is detected on any interface, disable AP PIN on + all interfaces + * WPS ER: + - Show SetSelectedRegistrar events as ctrl_iface events. + - Add special AP Setup Locked mode to allow read only ER. + ap_setup_locked=2 can now be used to enable a special mode where + WPS ER can learn the current AP settings, but cannot change them. + * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) + - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool + for testing protocol extensibility. + - Add build option CONFIG_WPS_STRICT to allow disabling of WPS + workarounds. + - Add support for AuthorizedMACs attribute. + * TDLS: + - Allow TDLS use or TDLS channel switching in the BSS to be + prohibited in the BSS, using config params tdls_prohibit and + tdls_prohibit_chan_switch. + * EAP server: Add support for configuring fragment size (see + fragment_size in hostapd.conf). + * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. + wlantest can be used to capture frames from a monitor interface + for realtime capturing or from pcap files for offline analysis. + * Interworking: Support added for 802.11u. Enable in .config with + CONFIG_INTERWORKING. See hostapd.conf for config parameters for + interworking. + * Android: Add build and runtime support for Android hostapd. + * Add a new debug message level for excessive information. Use + -ddd to enable. + * TLS: Add support for tls_disable_time_checks=1 in client mode. + * Internal TLS: + - Add support for TLS v1.1 (RFC 4346). Enable with build parameter + CONFIG_TLSV11. + - Add domainComponent parser for X.509 names + * Reorder some IEs to get closer to IEEE 802.11 standard. Move + WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. + Move HT IEs to be later in (Re)Assoc Resp. + * Many bugfixes. + 2010-04-18 - v0.7.2 * fix WPS internal Registrar use when an external Registrar is also active |