aboutsummaryrefslogtreecommitdiffstats
path: root/wpa_supplicant
Commit message (Collapse)AuthorAgeFilesLines
* wpa_cli: Use os_exec() for action script executionJouni Malinen2015-10-201-17/+8
| | | | | | | | | | | Use os_exec() to run the action script operations to avoid undesired command line processing for control interface event strings. Previously, it could have been possible for some of the event strings to include unsanitized data which is not suitable for system() use. (CVE-2014-3686) Change-Id: I0005ed08e4b06ba3d2ebe95b9240050e47ed2e8c Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Tested-by: Wolfgang Wiedmeyer <wolfgit@wiedmeyer.de>
* Add WFD dev info in device found eventIrfan Sheriff2012-12-141-2/+13
| | | | | Change-Id: Iad955663a694a88001fd8d4fc76fac3c6da7ba0e Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* WFD: Add preliminary WSD request processing and responseJouni Malinen2012-12-141-0/+62
| | | | | | | | | | This commit does not yet address support for different device roles, i.e., the same set of subelements are returned regardless of which role was indicated in the request. Change-Id: I8ddccfc043187c00ca6ad8a0848db2ab5715089d Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* WFD: Add support for sending Wi-Fi Display service discovery requestsJouni Malinen2012-12-144-0/+96
| | | | | | | | | | | | | | | | | wpa_cli p2p_serv_disc_req command can now be used to request WSD request to be sent to specified or all peers who support WSD. format: wifi-display <list of roles> <list of subelements> examples: p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source] 2,3,4,5 p2p_serv_disc_req 02:01:02:03:04:05 wifi-display [pri-sink] 3 p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [sec-source] 2 p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source+sink] 2,3,4,5 p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source][pri-sink] 2,3,4,5 Change-Id: I14f8a92aa9a2161d7db97f5670d2dfe3b63ef1e3 Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* WFD: Add wfd_subelems hexdump in BSS ctrl_iface command outputJouni Malinen2012-12-141-0/+26
| | | | | | | | This makes it easier to parse the WFD subelements from scan results. Change-Id: I1ce349bb33b56470888b47a37a96e56f1e0d6342 Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* wpa_supplicant: enable Wi-Fi display configVishal Mahaveer2012-12-141-0/+2
| | | | | | | Enable CONFIG_WIFI_DISPLAY flag for wpa_supplicant. Change-Id: Id5e959647693a2aa814d9429f06f8576aaed8848 Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* WFD: Add Wi-Fi Display supportJouni Malinen2012-12-148-1/+370
| | | | | | | | | | | | | | | | | | | | This commit adds control interface commands and internal storage of Wi-Fi Display related configuration. In addition, WFD IE is now added to various P2P frames, Probe Request/Response, and (Re)Association Request/Response frames. WFD subelements from peers are stored in the P2P peer table. Following control interface commands are now available: SET wifi_display <0/1> GET wifi_display WFD_SUBELEM_SET <subelem> [hexdump of length+body] WFD_SUBELEM_GET <subelem> Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> [vishalm@ti.com: Backported it to curent tree] Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Change-Id: Ief0cd61903facd9209927d9dc84c8f093f3b6bac
* wpa_supplicant: enable mr/mc by defaultIdo Reis2012-12-131-2/+2
| | | | | | | Update wpa_supplicant_template.conf for mr/mc Change-Id: Ib64d97cbfd24f205c57da3392b6fe2982ab4ba1b Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* Merge commit 'ol_r8.a5.06' into p-jb-mr1-releaseVishal Mahaveer2012-12-1110-25/+96
|\ | | | | | | | | | | | | | | Conflicts: wpa_supplicant/wpa_supplicant_template.conf Change-Id: Ifb38077650e8bb6075a17b8f2232f14b704281f1 Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
| * P2P: Fix broken rx action frame handling (INTERNAL-SQUASH)Eyal Shapira2012-11-131-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "P2P: Fix duplicate handling of rx action frames" went too far and dropped any rx action frames arriving on the GO interface. It assumed that any action frames were duplicated and received on both GO interface and P2P device interface. This is wrong as some actions frames like P2P presence request are sent to the GO interface address and won't be duplicated. The root cause of the duplication lies within the Rx path in mac80211 in Johannes` patch "mac80211: accept public action frames with mismatched BSSID". When wpa_s works with a separate group interface this creates a duplicated Rx on both the P2P dev interface and the GO interface. Fix the issue by canceling the duplication in wpa_s and discarding public action frames with unmatching bssid arriving on a dedicated GO interface (This should be squashed with "P2P: Fix duplicate handling of rx action frames") Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * wpa_s: don't accumulate delayed sched scan requests (UPSTREAM)Victor Goldenshtein2012-11-131-0/+3
| | | | | | | | | | | | | | Clear any previous pending timeouts before scheduling a new delayed sched scan. Signed-off-by: Victor Goldenshtein <victorg@ti.com>
| * wpa_s: restart sched scan on channel list changeVictor Goldenshtein2012-11-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The channel list can be changed as a result of arriving beacon hints during normal scan or as a result of local Reg-Domain change, some passive channels can become active and shall be reconfigured accordingly for the scheduled scan. This fixes the connection to hidden SSIDs on 5Ghz band during default Reg-Domain 00 (world roaming). Signed-off-by: Victor Goldenshtein <victorg@ti.com>
| * Avoid sched scan flood in case of mismatched security (UPSTREAM)Eyal Shapira2012-11-121-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current sched scan in the kernel is limited to SSID matching. A rare corner case is when an AP with a matching SSID but unmatching security to a saved profile is in the vicinity. In such a case sched scan results will immediately be returned after initiating sched scan however no match will be found due to the security mismatch. This goes on in a tight loop which is bad as it will effectively prevent the host from suspending and scan results will eventually contain the single AP matched by the sched scan due to expiration of other APs scanned in normal scans which are less frequent. Avoid this by stopping sched scan after detecting sched scan results were received but no matched network. Don't start another sched scan immediately but wait for the next normal scan without any results to restart it. This prevents the tight loop. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * P2P: Fix duplicate handling of rx action frames (UPSTREAM)Eyal Shapira2012-11-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using a separate group iface both p2p device iface and the group iface are registered for action frames. This causes duplicate handling of rx action frames. One side effect of this is getting multiple responses for requests sent over action frames while GO/CLI are up like prov disc and dev disc. Fix this by discarding the duplicate p2p action frames received on the group iface. The code will handle all of these correctly when coming on the p2p dev iface as it looks at the DA when where relevant. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * android: wpa_s template: set p2p_go_max_inactivity to 60s (ANDROID)Eyal Shapira2012-11-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous value of 30s was problematic in passing WiFi Direct certification test 6.1.12. In this test the GO is checked for buffering packets while the client is in PS and doesn't send a trigger to get out of PS for 50s. Any value less than 50s would lead to a failed inactivity check and the GO disconnecting the client in this test. It's important to minimize p2p_go_max_inactivity as it helps the GO detect clients which disconnected despite missing on the deauth frame. This is not uncommon in JB as there are scans on the STA interface which take us off the GO oper channel. Until the GO performs an inactivity check the UI will keep showing the client as "Connected" and the GO will remain operational which creates a bad user experience. [This should supersede "P2P: set P2P_GO_MAX_INACTIVITY to 100s" in the next rebase] Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * P2P: set P2P_GO_MAX_INACTIVITY to 100sIgal Chernobelsky2012-11-011-1/+1
| | | | | | | | | | | | | | | | WiFi Direct certification test 6.1.12 expects GO to be active during 50 sec, so changing P2P_GO_MAX_INACTIVITY from 30 sec to 100 sec to pass the test. Signed-off-by: Igal Chernobelsky <igalc@ti.com>
| * Don't disable and select new network if SETBAND didn't change (ANDROID)Eyal Shapira2012-10-291-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Current SETBAND would trigger network selection and as part of this a scan attempt. This is not required in case SETBAND didn't change the existing setting. In Android which sends SETBAND immediately after WiFi startup this would trigger needless scan attempts which would usually fail with -EBUSY as another framework triggers scan was already going on. The retry mechanism would then attempt further scans every 1 sec. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * Trigger sched scan on wpa_s init if enabled networks (INTERNAL)Eyal Shapira2012-10-291-5/+2
| | | | | | | | | | | | | | | | | | | | The switch to triggering a normal scan initially was done to prevent interference between sched scan and normal scan. This is no longer an issue. Triggering a sched scan is better as it works better in our case than the normal scan wrt hidden networks. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * android: wpa_s template: enable concurrent_sched_scan (ANDROID)Eyal Shapira2012-10-291-0/+1
| | | | | | | | | | | | | | Our solution supports this and it speeds up initial connection to hidden networks. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * Allow concurrent normal scan and sched scan (UPSTREAM)Eyal Shapira2012-10-294-2/+15
| | | | | | | | | | | | | | | | | | | | Some drivers support sched scan and normal scan. Enable this by configuration of concurrent_sched_scan=1 This can speed up connection to scan_ssid=1 networks as the sched scan doesn't get interrupted by a normal scan for wildcard SSID. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * Avoid normal scans before sched scan if max_scan_ssids=1 (UPSTREAM)Eyal Shapira2012-10-291-0/+5
| | | | | | | | | | | | | | | | | | | | In the case of max_scan_ssids=1 we may fallback to normal scan if there's a single scan_ssid network. However the normal scan can't add a wildcard SSID to the ssid list as it's limited to a single entry. This delays getting broadcast scan results. Always prefer to do a sched scan in such a case. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * Disable p2p on wlan0 (JB)Eyal Shapira2012-10-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This prevents P2P IEs from being added to probes of scans on the STA interface. These are not needed and prolong required channel dwell time and Tx of probes. This is somewhat of a hack but was a preferred approach on adding framework changes to add p2p_disabled=1 to p2p_supplicant.conf and not to wpa_supplicant.conf when both are created from the same template. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * P2P: Allow P2P functionality to be disabled per interfaceJouni Malinen2012-10-294-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, P2P is enabled globally for all virtual interfaces and this makes wpa_supplicant include WSC and P2P IEs in Probe Request frames for all scans even if this is for a non-P2P station connection to speed up device discovery. If an interface is dedicated for non-P2P station mode operations, it is now possible to disable addition of WSC and P2P IEs into Probe Request frames with a per-interface p2p_disabled parameter. This can be set either in the configuration file (p2p_disabled=1) or at run time ("wpa_cli -i wlan0 set p2p_disabled 1"). Unlike the previous mechanism ("wpa_cli p2p_set disabled 1"), the new parameter changes the behavior only for the specified interface while other interfaces continue to follow the global P2P enabled/disabled state. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * Revert "Add P2P IEs to probe requests only when in P2P (UPSTREAM)"Eyal Shapira2012-10-293-9/+1
| | | | | | | | | | | | | | | | | | | | | | This is replaced by a recent patch by Jouni in the upstream: "P2P: Allow P2P functionality to be disabled per interface" This reverts commit a56f6df6f8e5dcd650893e8beb4a16a633c179d1. Conflicts: src/p2p/p2p.c
| * P2P: speed up scans when connecting to persistent GO (UPSTREAM)Eyal Shapira2012-10-291-1/+2
| | | | | | | | | | | | | | | | | | | | In the case of a persistent GO invoking a P2P group by invite the P2P client starts scanning for the GO but it might still not be up. If not found the next scan is scheduled for scan_interval secs but this too long. Speed up scans to find GO like it's being done in P2P provisioing. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * wpa_s: fix bss selection on identical SSIDs with WEP+AES/TKIPVictor Goldenshtein2012-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Configuring two identical SSIDs - one with WEP-SHARED security and one with AES/TKIP breaks any authentication attempt with WEP-SHARED SSID. Reason for this behavior is that during BSS selection from the priority group wrong BSS (with AES/TKIP) was selected. Fix this by disallowing "non-WPA/WPA2" BSS selection with defined rsn_ie/wpa_ie. Signed-off-by: Victor Goldenshtein <victorg@ti.com>
* | Add delimiter for bss commandIrfan Sheriff2012-10-241-0/+7
| | | | | | | | | | | | | | | | With the availability of MASK option, the number of lines per BSS is not obvious, add a delimiter to make parsing less flaky Bug: 2961159 Change-Id: I9e5523f8da183e0735dbc06f0c09c9f841060504
* | Merge commit 'ol_r8.a4.04' into d-jb-releaseVishal Mahaveer2012-10-166-7/+77
|\ \ | |/
| * P2P: Don't delete group on non P2P interfaces (UPSTREAM)Eyal Shapira2012-10-101-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | p2p_group_remove * calls wpas_p2p_disconnect on all interfaces including non P2P ones. This has undesired effects such as disconnecting concurrent connected STA interfaces as well as emitting P2P-GROUP-REMOVED events on all interfaces including ones that didn't actually have a P2P CLI or GO running. Instead fail explicitly when attempting to p2p disconnect an interface with no P2P activity. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * android: wpa_s template: disassoc on low ack by default (ANDROID)Arik Nemtsov2012-10-031-0/+1
| | | | | | | | | | | | When operating as a GO, disassoc the peer station on aging/Tx failure Signed-off-by: Arik Nemtsov <arik@wizery.com>
| * P2P: block find if P2P GO or CLI are active (INTERNAL)Eyal Shapira2012-09-301-0/+20
| | | | | | | | | | | | | | | | | | The roc on a channel for 100+ ms which is part of the find disturbs the P2P GO/CLI as these scenarios are unsupported in non multi channel driver. Therefore block the find in this case. Signed-off-by: Eyal Shapira <eyal@wizery.com>
| * wpa_s: handle channel conflicts on GO+STA shared interfaceVictor Goldenshtein2012-09-271-0/+6
| | | | | | | | | | | | | | | | | | Stop blocking GO role if its operational channel differs from the STA channel, as now the driver can handle channel conflicts by sending channel switch request to the userspace. Signed-off-by: Victor Goldenshtein <victorg@ti.com>
| * P2P: correct p2p_mult_chan operation (SQUASH)Arik Nemtsov2012-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Should be squashed with: commit 61d59eaa7ebf59c926d40b00228e227b3d27f8c9 Author: Arik Nemtsov <arik@wizery.com> Date: Mon Sep 24 17:39:23 2012 +0200 P2P: add conf param to prefer p2p multi channel Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com>
| * android: wpa_s template: allow p2p multi channel operation (ANDROID)Arik Nemtsov2012-09-241-0/+1
| | | | | | | | | | | | | | | | | | Set the p2p_multi_chan parameter to 1 by default. It will have no effect if the current driver doesn't support multi-channel. Otherwise it will allow the P2P channel to be set while disregarding other connected interfaces on the phy. Signed-off-by: Arik Nemtsov <arik@wizery.com>
| * P2P: add conf param to prefer p2p multi channelArik Nemtsov2012-09-244-7/+22
| | | | | | | | | | | | | | | | | | | | | | When p2p_multi_chan=1 is set in the wpa_supplicant.conf file, don't set the P2P operating channel according to any existing shared frequency. Normally we would force the operating channel to be the same as that of other interfaces operating on the same phy. This param allow us to optimize P2P user experience by allowing an arbitrary operating channel. Signed-off-by: Arik Nemtsov <arik@wizery.com>
| * P2P: don't handle concurrency conflicts in multi-chan mode (ANDROID)Arik Nemtsov2012-09-241-0/+3
| | | | | | | | | | | | | | When the multi-channel flag is on, don't try to force specific p2p connection modes or change go_intent. Signed-off-by: Arik Nemtsov <arik@wizery.com>
* | Merge commit 'ol_R5.SP3.01' into d-jb-releaseVishal Mahaveer2012-09-201-0/+6
|\ \ | |/
| * hostap: add channel switch ability to AP & GO (INTERNAL)Victor Goldenshtein2012-09-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add channel switch command and handle channel switch request/complete events. New hostapd_eid_csa() which builds the channel switch announcement IE. Add this CSA to the beacon frame prior performing a channel switch and remove it once it's completed. New EVENT_REQ_CH_SW which indicates that the driver has requested to perform a channel switch. Signed-hostap: Victor Goldenshtein <victorg@ti.com>
* | wpa_supplicant: template conf file updateVishal Mahaveer2012-09-171-6/+0
|/ | | | | | | | | | | | | | | | In Android we don't have to hardcode device related parameters in wpa_supplicant.conf file. It comes from Android properties as shown below, device_name --> ro.product.name manufacturer --> ro.product.manufacturer model_name --> ro.product.model model_number --> ro.product.model serial_number --> ro.serialno Also use_p2p_group_interface=1 part is defined in service defenition Change-Id: Ifd6c60c3c493a52c8a4dd45ab9cfcb244e1b7c71 Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
* android: wpa_s template: allow HT40 GO by default (ANDROID)Arik Nemtsov2012-09-041-1/+2
| | | | Signed-off-by: Arik Nemtsov <arik@wizery.com>
* P2P: add a conf parameter to start a GO as HT40 if allowedArik Nemtsov2012-09-044-2/+15
| | | | | | | | | | When specified in the conf file this parameter will make all invocations of p2p_group_add and p2p_connect behave as if "ht40" has been specified on the command line. This shouldn't do harm since regulatory constraints and driver capabilities are consulted anyway before starting HT40 mode. Signed-hostap: Arik Nemtsov <arik@wizery.com>
* P2P: Use larger GO config timeout if HT40 is usedJouni Malinen2012-09-041-0/+7
| | | | | | | Increase GO config timeout if HT40 is used since it takes some time to scan channels for coex purposes before the BSS can be started. Signed-hostap: Jouni Malinen <j@w1.fi>
* P2P: Add optional "ht40" argument for p2p_connectRajkumar Manoharan2012-09-046-8/+21
| | | | | | | This can be used to start negotiated GO in 40 MHz channel width in 5GHz band. Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
* P2P: Enable 40 MHz support for autonomous P2P group additionRajkumar Manoharan2012-09-047-19/+68
| | | | | | | | Add optional "ht40" argument for p2p_group_add command to enable 40 MHz in 5GHz band. This configures the secondary channel, when HT support is enabled and if the HW supports 40 MHz channel width. Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
* P2P: Move channel validation into a separate functionRajkumar Manoharan2012-09-041-25/+38
| | | | Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
* Supply the connection scan results to bgscan after initYoni Divinsky2012-09-041-1/+9
| | | | | | | | | If bgscan is enabled, then bgscan is initiated after the connection, with no bss scan result information. Since a scan was performed prior to the connection, the information exists and can be used to initialize the bgscan's cache. Signed-hostap: Yoni Divinsky <yoni.divinsky@ti.com>
* Revert "Supply the connection scan results to bgscan after init"Arik Nemtsov2012-09-041-5/+1
| | | | | | | This reverts commit 1cd9da6b88d7dd9b3c887b62a584aba4bb08299f. This old commit has a memory leak. Use a newer commit from upstream that amends this.
* Remove default ACM=1 from AC_VO and AC_VIJouni Malinen2012-09-041-2/+2
| | | | | | | | | | There is no need to mandate admission control (ACM=1) by default, so clear that flag in the case the configuration file does not specify wmm_ac_{vo,vi}_acm value. This gets closer to the values mentioned in the sample hostapd.conf file and reduces the need to specify WMM parameters in the configuration file for most common use cases. Signed-hostap: Jouni Malinen <j@w1.fi>
* ctrl_iface: allow forcing go_intent during p2p_connect (ANDROID)Arik Nemtsov2012-08-151-9/+17
| | | | | | | | | | | | Allow the p2p_connect command to ignore android p2p concurrency considerations. Use the command line argument "no_p2p_conc" to p2p_connect in order to be able to set the go_intent. For instance: wpa_cli p2p_connect 00:11:22:33:44:55 pbc no_p2p_conc go_intent=3 Signed-off-by: Arik Nemtsov <arik@wizery.com>
* Add P2P IEs to probe requests only when in P2P (UPSTREAM)Eyal Shapira2012-08-133-1/+9
| | | | | | | | | | | | The current code caused P2P and consquently WPS IEs to be added to any probe as the check was for non null global->p2p. global->p2p gets set whenever P2P is initialized globally and that occurs on the first interface init. Fix this by indicating wps is in use only when in active P2P discovery or connection establishement. (i.e. not P2P_IDLE - either doing search, neg or provisioning) Signed-off-by: Eyal Shapira <eyal@wizery.com>
generated by cgit v1.1 at 2024-12-22 08:50:59 +0000