diff options
author | Haavard Skinnemoen <hskinnemoen@atmel.com> | 2007-09-02 23:15:49 +0100 |
---|---|---|
committer | Richard Purdie <rpurdie@rpsys.net> | 2007-10-11 22:24:12 +0100 |
commit | 18f65c793a5106b9f99822ef248e71582db03386 (patch) | |
tree | 48883c01d63487ac44753ea9cd5a782250bbbc88 | |
parent | 0b75f2dfa2a67012ff6996b322117e1d7e45abe1 (diff) | |
download | kernel_samsung_smdk4412-18f65c793a5106b9f99822ef248e71582db03386.zip kernel_samsung_smdk4412-18f65c793a5106b9f99822ef248e71582db03386.tar.gz kernel_samsung_smdk4412-18f65c793a5106b9f99822ef248e71582db03386.tar.bz2 |
backlight: Add Samsung LTV350QV LCD driver
This patch adds support for powering on and off the Samsung LTV350QV LCD
panel via SPI. The driver responds to framebuffer power management, it
powers off the panel on reboot/halt/poweroff. It can also be controlled
through sysfs. The panel is powered up when the module is loaded, and off
when the module is unloaded. Verified on AVR32 STK1000.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
-rw-r--r-- | drivers/video/backlight/Kconfig | 12 | ||||
-rw-r--r-- | drivers/video/backlight/Makefile | 2 | ||||
-rw-r--r-- | drivers/video/backlight/ltv350qv.c | 330 | ||||
-rw-r--r-- | drivers/video/backlight/ltv350qv.h | 95 |
4 files changed, 439 insertions, 0 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 2580f5f..b6f936a 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -24,6 +24,18 @@ config LCD_CLASS_DEVICE To have support for your specific LCD panel you will have to select the proper drivers which depend on this option. +config LCD_LTV350QV + tristate "Samsung LTV350QV LCD Panel" + depends on LCD_CLASS_DEVICE && SPI_MASTER + default n + help + If you have a Samsung LTV350QV LCD panel, say y to include a + power control driver for it. The panel starts up in power + off state, so you need this driver in order to see any + output. + + The LTV350QV panel is present on all ATSTK1000 boards. + # # Backlight # diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index c6e2266..965a78b 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -1,6 +1,8 @@ # Backlight & LCD drivers obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o +obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o + obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c new file mode 100644 index 0000000..2eb206b --- /dev/null +++ b/drivers/video/backlight/ltv350qv.c @@ -0,0 +1,330 @@ +/* + * Power control for Samsung LTV350QV Quarter VGA LCD Panel + * + * Copyright (C) 2006, 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "ltv350qv.h" + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +struct ltv350qv { + struct spi_device *spi; + u8 *buffer; + int power; + struct lcd_device *ld; +}; + +/* + * The power-on and power-off sequences are taken from the + * LTV350QV-F04 data sheet from Samsung. The register definitions are + * taken from the S6F2002 command list also from Samsung. Both + * documents are distributed with the AVR32 Linux BSP CD from Atmel. + * + * There's still some voodoo going on here, but it's a lot better than + * in the first incarnation of the driver where all we had was the raw + * numbers from the initialization sequence. + */ +static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val) +{ + struct spi_message msg; + struct spi_transfer index_xfer = { + .len = 3, + .cs_change = 1, + }; + struct spi_transfer value_xfer = { + .len = 3, + }; + + spi_message_init(&msg); + + /* register index */ + lcd->buffer[0] = LTV_OPC_INDEX; + lcd->buffer[1] = 0x00; + lcd->buffer[2] = reg & 0x7f; + index_xfer.tx_buf = lcd->buffer; + spi_message_add_tail(&index_xfer, &msg); + + /* register value */ + lcd->buffer[4] = LTV_OPC_DATA; + lcd->buffer[5] = val >> 8; + lcd->buffer[6] = val; + value_xfer.tx_buf = lcd->buffer + 4; + spi_message_add_tail(&value_xfer, &msg); + + return spi_sync(lcd->spi, &msg); +} + +/* The comments are taken straight from the data sheet */ +static int ltv350qv_power_on(struct ltv350qv *lcd) +{ + int ret; + + /* Power On Reset Display off State */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000)) + goto err; + msleep(15); + + /* Power Setting Function 1 */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE)) + goto err; + if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE)) + goto err_power1; + + /* Power Setting Function 2 */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5))) + goto err_power2; + + msleep(55); + + /* Instruction Setting */ + ret = ltv350qv_write_reg(lcd, LTV_IFCTL, + LTV_NMD | LTV_REV | LTV_NL(0x1d)); + ret |= ltv350qv_write_reg(lcd, LTV_DATACTL, + LTV_DS_SAME | LTV_CHS_480 + | LTV_DF_RGB | LTV_RGB_BGR); + ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE, + LTV_VSPL_ACTIVE_LOW + | LTV_HSPL_ACTIVE_LOW + | LTV_DPL_SAMPLE_RISING + | LTV_EPL_ACTIVE_LOW + | LTV_SS_RIGHT_TO_LEFT); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); + ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a); + ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021); + ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0)); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000); + if (ret) + goto err_settings; + + /* Wait more than 2 frames */ + msleep(20); + + /* Display On Sequence */ + ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE + | LTV_POWER_ON | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3)); + if (ret) + goto err_disp_on; + + /* Display should now be ON. Phew. */ + return 0; + +err_disp_on: + /* + * Try to recover. Error handling probably isn't very useful + * at this point, just make a best effort to switch the panel + * off. + */ + ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); +err_settings: +err_power2: +err_power1: + ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); + msleep(1); +err: + ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); + return -EIO; +} + +static int ltv350qv_power_off(struct ltv350qv *lcd) +{ + int ret; + + /* Display Off Sequence */ + ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE + | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); + + /* Power down setting 1 */ + ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); + + /* Wait at least 1 ms */ + msleep(1); + + /* Power down setting 2 */ + ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); + + /* + * No point in trying to recover here. If we can't switch the + * panel off, what are we supposed to do other than inform the + * user about the failure? + */ + if (ret) + return -EIO; + + /* Display power should now be OFF */ + return 0; +} + +static int ltv350qv_power(struct ltv350qv *lcd, int power) +{ + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ltv350qv_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ltv350qv_power_off(lcd); + + if (!ret) + lcd->power = power; + + return ret; +} + +static int ltv350qv_set_power(struct lcd_device *ld, int power) +{ + struct ltv350qv *lcd = lcd_get_data(ld); + + return ltv350qv_power(lcd, power); +} + +static int ltv350qv_get_power(struct lcd_device *ld) +{ + struct ltv350qv *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static struct lcd_ops ltv_ops = { + .get_power = ltv350qv_get_power, + .set_power = ltv350qv_set_power, +}; + +static int __devinit ltv350qv_probe(struct spi_device *spi) +{ + struct ltv350qv *lcd; + struct lcd_device *ld; + int ret; + + lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->spi = spi; + lcd->power = FB_BLANK_POWERDOWN; + lcd->buffer = kzalloc(8, GFP_KERNEL); + + ld = lcd_device_register("ltv350qv", &spi->dev, lcd, <v_ops); + if (IS_ERR(ld)) { + ret = PTR_ERR(ld); + goto out_free_lcd; + } + lcd->ld = ld; + + ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK); + if (ret) + goto out_unregister; + + dev_set_drvdata(&spi->dev, lcd); + + return 0; + +out_unregister: + lcd_device_unregister(ld); +out_free_lcd: + kfree(lcd); + return ret; +} + +static int __devexit ltv350qv_remove(struct spi_device *spi) +{ + struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); + + ltv350qv_power(lcd, FB_BLANK_POWERDOWN); + lcd_device_unregister(lcd->ld); + kfree(lcd); + + return 0; +} + +#ifdef CONFIG_PM +static int ltv350qv_suspend(struct spi_device *spi, pm_message_t state) +{ + struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); + + return ltv350qv_power(lcd, FB_BLANK_POWERDOWN); +} + +static int ltv350qv_resume(struct spi_device *spi) +{ + struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); + + return ltv350qv_power(lcd, FB_BLANK_UNBLANK); +} +#else +#define ltv350qv_suspend NULL +#define ltv350qv_resume NULL +#endif + +/* Power down all displays on reboot, poweroff or halt */ +static void ltv350qv_shutdown(struct spi_device *spi) +{ + struct ltv350qv *lcd = dev_get_drvdata(&spi->dev); + + ltv350qv_power(lcd, FB_BLANK_POWERDOWN); +} + +static struct spi_driver ltv350qv_driver = { + .driver = { + .name = "ltv350qv", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = ltv350qv_probe, + .remove = __devexit_p(ltv350qv_remove), + .shutdown = ltv350qv_shutdown, + .suspend = ltv350qv_suspend, + .resume = ltv350qv_resume, +}; + +static int __init ltv350qv_init(void) +{ + return spi_register_driver(<v350qv_driver); +} + +static void __exit ltv350qv_exit(void) +{ + spi_unregister_driver(<v350qv_driver); +} +module_init(ltv350qv_init); +module_exit(ltv350qv_exit); + +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h new file mode 100644 index 0000000..189112e --- /dev/null +++ b/drivers/video/backlight/ltv350qv.h @@ -0,0 +1,95 @@ +/* + * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel + * + * Copyright (C) 2006, 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LTV350QV_H +#define __LTV350QV_H + +#define LTV_OPC_INDEX 0x74 +#define LTV_OPC_DATA 0x76 + +#define LTV_ID 0x00 /* ID Read */ +#define LTV_IFCTL 0x01 /* Display Interface Control */ +#define LTV_DATACTL 0x02 /* Display Data Control */ +#define LTV_ENTRY_MODE 0x03 /* Entry Mode */ +#define LTV_GATECTL1 0x04 /* Gate Control 1 */ +#define LTV_GATECTL2 0x05 /* Gate Control 2 */ +#define LTV_VBP 0x06 /* Vertical Back Porch */ +#define LTV_HBP 0x07 /* Horizontal Back Porch */ +#define LTV_SOTCTL 0x08 /* Source Output Timing Control */ +#define LTV_PWRCTL1 0x09 /* Power Control 1 */ +#define LTV_PWRCTL2 0x0a /* Power Control 2 */ +#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */ + +/* Bit definitions for LTV_IFCTL */ +#define LTV_IM (1 << 15) +#define LTV_NMD (1 << 14) +#define LTV_SSMD (1 << 13) +#define LTV_REV (1 << 7) +#define LTV_NL(x) (((x) & 0x001f) << 0) + +/* Bit definitions for LTV_DATACTL */ +#define LTV_DS_SAME (0 << 12) +#define LTV_DS_D_TO_S (1 << 12) +#define LTV_DS_S_TO_D (2 << 12) +#define LTV_CHS_384 (0 << 9) +#define LTV_CHS_480 (1 << 9) +#define LTV_CHS_492 (2 << 9) +#define LTV_DF_RGB (0 << 6) +#define LTV_DF_RGBX (1 << 6) +#define LTV_DF_XRGB (2 << 6) +#define LTV_RGB_RGB (0 << 2) +#define LTV_RGB_BGR (1 << 2) +#define LTV_RGB_GRB (2 << 2) +#define LTV_RGB_RBG (3 << 2) + +/* Bit definitions for LTV_ENTRY_MODE */ +#define LTV_VSPL_ACTIVE_LOW (0 << 15) +#define LTV_VSPL_ACTIVE_HIGH (1 << 15) +#define LTV_HSPL_ACTIVE_LOW (0 << 14) +#define LTV_HSPL_ACTIVE_HIGH (1 << 14) +#define LTV_DPL_SAMPLE_RISING (0 << 13) +#define LTV_DPL_SAMPLE_FALLING (1 << 13) +#define LTV_EPL_ACTIVE_LOW (0 << 12) +#define LTV_EPL_ACTIVE_HIGH (1 << 12) +#define LTV_SS_LEFT_TO_RIGHT (0 << 8) +#define LTV_SS_RIGHT_TO_LEFT (1 << 8) +#define LTV_STB (1 << 1) + +/* Bit definitions for LTV_GATECTL1 */ +#define LTV_CLW(x) (((x) & 0x0007) << 12) +#define LTV_GAON (1 << 5) +#define LTV_SDR (1 << 3) + +/* Bit definitions for LTV_GATECTL2 */ +#define LTV_NW_INV_FRAME (0 << 14) +#define LTV_NW_INV_1LINE (1 << 14) +#define LTV_NW_INV_2LINE (2 << 14) +#define LTV_DSC (1 << 12) +#define LTV_GIF (1 << 8) +#define LTV_FHN (1 << 7) +#define LTV_FTI(x) (((x) & 0x0003) << 4) +#define LTV_FWI(x) (((x) & 0x0003) << 0) + +/* Bit definitions for LTV_SOTCTL */ +#define LTV_SDT(x) (((x) & 0x0007) << 10) +#define LTV_EQ(x) (((x) & 0x0007) << 2) + +/* Bit definitions for LTV_PWRCTL1 */ +#define LTV_VCOM_DISABLE (1 << 14) +#define LTV_VCOMOUT_ENABLE (1 << 11) +#define LTV_POWER_ON (1 << 9) +#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */ +#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */ + +/* Bit definitions for LTV_PWRCTL2 */ +#define LTV_VCOML_ENABLE (1 << 13) +#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */ +#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */ + +#endif /* __LTV350QV_H */ |