diff options
author | Eilon Greenstein <eilong@broadcom.com> | 2009-07-21 05:47:47 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-07-21 11:18:30 -0700 |
commit | 4d295db0efd2ccf06edb7a45ad885b40c56b7161 (patch) | |
tree | fb545833c5c3618d58754d50ba899b62dd37abef | |
parent | 5316bc0b9adbefe24f149b12caeddc30df6f04e1 (diff) | |
download | kernel_samsung_smdk4412-4d295db0efd2ccf06edb7a45ad885b40c56b7161.zip kernel_samsung_smdk4412-4d295db0efd2ccf06edb7a45ad885b40c56b7161.tar.gz kernel_samsung_smdk4412-4d295db0efd2ccf06edb7a45ad885b40c56b7161.tar.bz2 |
bnx2x: Supporting BCM8727 PHY
Adding support for BCM8727 - a dual port SFP+ PHY. That includes verification of
the optic module vendor and part number - the list of approved modules resides
on the nvram and the module is verified by the FW. Since not all users would
like to use this verification feature, it can be disabled. The default behavior
is to issue a warning if the module is not approved, but still allow using it -
but it is also possible to disable the link if the module is not approved.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/bnx2x.h | 1 | ||||
-rw-r--r-- | drivers/net/bnx2x_hsi.h | 25 | ||||
-rw-r--r-- | drivers/net/bnx2x_link.c | 1095 | ||||
-rw-r--r-- | drivers/net/bnx2x_link.h | 14 | ||||
-rw-r--r-- | drivers/net/bnx2x_main.c | 67 | ||||
-rw-r--r-- | drivers/net/bnx2x_reg.h | 26 |
6 files changed, 1049 insertions, 179 deletions
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 85a737c..8b6e83d 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1006,6 +1006,7 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port); int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port); +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command); static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, int wait) diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 41c6dcb..7de83c4 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -248,6 +248,8 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 @@ -358,10 +360,16 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ #define PORT_FEATURE_MBA_ENABLED 0x02000000 #define PORT_FEATURE_MFW_ENABLED 0x04000000 - /* Check the optic vendor via i2c before allowing it to be used by - SW */ -#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLED 0x00000000 -#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED 0x08000000 + /* Reserved bits: 28-29 */ + /* Check the optic vendor via i2c against a list of approved modules + in a separate nvram image */ +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK 0xE0000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_SHIFT 29 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT 0x00000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER 0x20000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG 0x40000000 +#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN 0x60000000 + u32 wol_config; /* Default is used when driver sets to "auto" mode */ @@ -657,6 +665,12 @@ struct drv_func_mb { #define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 #define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 #define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + /* + * The optic module verification commands requris bootcode + * v5.0.6 or later + */ +#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000 +#define REQ_BC_VER_4_VRFY_OPT_MDL 0x00050006 #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 @@ -691,6 +705,9 @@ struct drv_func_mb { #define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 #define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 #define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 +#define FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS 0xa0100000 +#define FW_MSG_CODE_VRFY_OPT_MDL_INVLD_IMG 0xa0200000 +#define FW_MSG_CODE_VRFY_OPT_MDL_UNAPPROVED 0xa0300000 #define FW_MSG_CODE_LIC_CHALLENGE 0xff010000 #define FW_MSG_CODE_LIC_RESPONSE 0xff020000 diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index ed648ac..b9c85a2 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -139,21 +139,26 @@ #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 + +#define SFP_EEPROM_COMP_CODE_ADDR 0x3 + #define SFP_EEPROM_COMP_CODE_SR_MASK (1<<4) + #define SFP_EEPROM_COMP_CODE_LR_MASK (1<<5) + #define SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6) + #define SFP_EEPROM_FC_TX_TECH_ADDR 0x8 #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4 #define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8 -#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 -#define SFP_EEPROM_VENDOR_NAME_SIZE 16 + #define SFP_EEPROM_OPTIONS_ADDR 0x40 #define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1 #define SFP_EEPROM_OPTIONS_SIZE 2 -#define SFP_MODULE_TYPE_UNKNOWN 0x0 -#define SFP_MODULE_TYPE_LC 0x1 -#define SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE 0x2 -#define SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE 0x3 +#define EDC_MODE_LINEAR 0x0022 +#define EDC_MODE_LIMITING 0x0044 +#define EDC_MODE_PASSIVE_DAC 0x0055 + + -#define SFP_LIMITING_MODE_VALUE 0x0044 /**********************************************************/ /* INTERFACE */ /**********************************************************/ @@ -793,6 +798,7 @@ static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port) switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: /* All MDC/MDIO is directed through single EMAC */ if (REG_RD(bp, NIG_REG_PORT_SWAP)) emac_base = GRCBASE_EMAC0; @@ -1887,6 +1893,10 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: /* Restore normal power mode*/ @@ -2171,13 +2181,15 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params) } -static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, u32 shmem_base) +static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, + u8 ext_phy_addr, + u32 ext_phy_type, + u32 shmem_base) { /* Boot port from external ROM */ /* EDC grst */ bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, @@ -2185,21 +2197,21 @@ static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, /* ucode reboot and rst */ bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x008c); bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001); /* Reset internal microprocessor */ bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, @@ -2207,7 +2219,7 @@ static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, /* Release srst bit */ bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, @@ -2218,17 +2230,36 @@ static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, /* Clear ser_boot_ctl bit */ bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000); bnx2x_save_bcm_spirom_ver(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + ext_phy_type, ext_phy_addr, shmem_base); } +static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port, + u8 ext_phy_addr, + u32 shmem_base) +{ + bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073, + shmem_base); +} + +static void bnx2x_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, + u8 ext_phy_addr, + u32 shmem_base) +{ + bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + shmem_base); + +} + static void bnx2x_bcm8726_external_rom_boot(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -2258,9 +2289,10 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params) MDIO_PMA_REG_GEN_CTRL, MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + /* Set PLL register value to be same like in P13 ver */ bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_GEN_CTRL2, + MDIO_PMA_REG_PLL_CTRL, 0x73A0); /* Clear soft reset. @@ -2285,15 +2317,16 @@ static void bnx2x_bcm8726_external_rom_boot(struct link_params *params) params->shmem_base); } -static void bnx2x_bcm8726_set_transmitter(struct bnx2x *bp, u8 port, - u8 ext_phy_addr, u8 tx_en) +static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port, + u32 ext_phy_type, u8 ext_phy_addr, + u8 tx_en) { u16 val; DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n", tx_en, port); /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ bnx2x_cl45_read(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, @@ -2305,18 +2338,19 @@ static void bnx2x_bcm8726_set_transmitter(struct bnx2x *bp, u8 port, val |= (1<<15); bnx2x_cl45_write(bp, port, - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, + ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, val); } - -static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) { +static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params, + u16 addr, u8 byte_cnt, u8 *o_buf) +{ struct bnx2x *bp = params->bp; - u16 val, i; + u16 val = 0; + u16 i; u8 port = params->port; u8 ext_phy_addr = ((params->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> @@ -2332,7 +2366,7 @@ static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT, + MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, (byte_cnt | 0xa000)); /* Set the read command address */ @@ -2340,7 +2374,7 @@ static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR, + MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, addr); /* Activate read command */ @@ -2348,7 +2382,7 @@ static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_CTRL, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, 0x2c0f); /* Wait up to 500us for command complete status */ @@ -2357,18 +2391,18 @@ static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE) + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) break; udelay(5); } - if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) != - MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE) { + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { DP(NETIF_MSG_LINK, "Got bad status 0x%x when reading from SFP+ EEPROM\n", - (val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK)); + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); return -EINVAL; } @@ -2387,29 +2421,147 @@ static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, - MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val); - if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) == - MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE) + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) return 0;; msleep(1); } return -EINVAL; } +static u8 bnx2x_8727_read_sfp_module_eeprom(struct link_params *params, + u16 addr, u8 byte_cnt, u8 *o_buf) +{ + struct bnx2x *bp = params->bp; + u16 val, i; + u8 port = params->port; + u8 ext_phy_addr = ((params->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + + if (byte_cnt > 16) { + DP(NETIF_MSG_LINK, "Reading from eeprom is" + " is limited to 0xf\n"); + return -EINVAL; + } + + /* Need to read from 1.8000 to clear it */ + bnx2x_cl45_read(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + &val); -static u8 bnx2x_get_sfp_module_type(struct link_params *params, - u8 *module_type) + /* Set the read command byte count */ + bnx2x_cl45_write(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, + ((byte_cnt < 2) ? 2 : byte_cnt)); + + /* Set the read command address */ + bnx2x_cl45_write(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, + addr); + /* Set the destination address */ + bnx2x_cl45_write(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + 0x8004, + MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF); + + /* Activate read command */ + bnx2x_cl45_write(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + 0x8002); + /* Wait appropriate time for two-wire command to finish before + polling the status register */ + msleep(1); + + /* Wait up to 500us for command complete status */ + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) + break; + udelay(5); + } + + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { + DP(NETIF_MSG_LINK, + "Got bad status 0x%x when reading from SFP+ EEPROM\n", + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); + return -EINVAL; + } + + /* Read the buffer */ + for (i = 0; i < byte_cnt; i++) { + bnx2x_cl45_read(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val); + o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK); + } + + for (i = 0; i < 100; i++) { + bnx2x_cl45_read(bp, port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) + return 0;; + msleep(1); + } + + return -EINVAL; +} + +u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf) +{ + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) + return bnx2x_8726_read_sfp_module_eeprom(params, addr, + byte_cnt, o_buf); + else if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) + return bnx2x_8727_read_sfp_module_eeprom(params, addr, + byte_cnt, o_buf); + return -EINVAL; +} + +static u8 bnx2x_get_edc_mode(struct link_params *params, + u16 *edc_mode) { struct bnx2x *bp = params->bp; - u8 val; - *module_type = SFP_MODULE_TYPE_UNKNOWN; + u8 val, check_limiting_mode = 0; + *edc_mode = EDC_MODE_LIMITING; /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(params, SFP_EEPROM_CON_TYPE_ADDR, 1, &val) != 0) { - DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM"); + DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n"); return -EINVAL; } @@ -2433,13 +2585,13 @@ static u8 bnx2x_get_sfp_module_type(struct link_params *params, if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - *module_type = SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE; + check_limiting_mode = 1; } else if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, "Passive Copper" " cable detected\n"); - *module_type = - SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE; + *edc_mode = + EDC_MODE_PASSIVE_DAC; } else { DP(NETIF_MSG_LINK, "Unknown copper-cable-" "type 0x%x !!!\n", copper_module_type); @@ -2449,7 +2601,7 @@ static u8 bnx2x_get_sfp_module_type(struct link_params *params, } case SFP_EEPROM_CON_TYPE_VAL_LC: DP(NETIF_MSG_LINK, "Optic module detected\n"); - *module_type = SFP_MODULE_TYPE_LC; + check_limiting_mode = 1; break; default: @@ -2457,89 +2609,92 @@ static u8 bnx2x_get_sfp_module_type(struct link_params *params, val); return -EINVAL; } + + if (check_limiting_mode) { + u8 options[SFP_EEPROM_OPTIONS_SIZE]; + if (bnx2x_read_sfp_module_eeprom(params, + SFP_EEPROM_OPTIONS_ADDR, + SFP_EEPROM_OPTIONS_SIZE, + options) != 0) { + DP(NETIF_MSG_LINK, "Failed to read Option" + " field from module EEPROM\n"); + return -EINVAL; + } + if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) + *edc_mode = EDC_MODE_LINEAR; + else + *edc_mode = EDC_MODE_LIMITING; + } + DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode); return 0; } - /* This function read the relevant field from the module ( SFP+ ), and verify it is compliant with this board */ -static u8 bnx2x_verify_sfp_module(struct link_params *params, - u8 module_type) +static u8 bnx2x_verify_sfp_module(struct link_params *params) { struct bnx2x *bp = params->bp; - u8 *str_p, *tmp_buf; - u16 i; - -#define COMPLIANCE_STR_CNT 6 - u8 *compliance_str[] = {"Broadcom", "JDSU", "Molex Inc", "PICOLIGHT", - "FINISAR CORP. ", "Amphenol"}; - u8 buf[SFP_EEPROM_VENDOR_NAME_SIZE]; - /* Passive Copper cables are allowed to participate, - since the module is hardwired to the copper cable */ - - if (!(params->feature_config_flags & - FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) { + u32 val; + u32 fw_resp; + char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1]; + char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1]; + + val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].config)); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { DP(NETIF_MSG_LINK, "NOT enforcing module verification\n"); return 0; } - if (module_type != SFP_MODULE_TYPE_LC) { - DP(NETIF_MSG_LINK, "No need to verify copper cable\n"); + /* Ask the FW to validate the module */ + if (!(params->feature_config_flags & + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY)) { + DP(NETIF_MSG_LINK, "FW does not support OPT MDL " + "verification\n"); + return -EINVAL; + } + + fw_resp = bnx2x_fw_command(bp, DRV_MSG_CODE_VRFY_OPT_MDL); + if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { + DP(NETIF_MSG_LINK, "Approved module\n"); return 0; } - /* In case of non copper cable or Active copper cable, - verify that the SFP+ module is compliant with this board*/ + /* format the warning message */ if (bnx2x_read_sfp_module_eeprom(params, SFP_EEPROM_VENDOR_NAME_ADDR, SFP_EEPROM_VENDOR_NAME_SIZE, - buf) != 0) { - DP(NETIF_MSG_LINK, "Failed to read Vendor-Name from" - " module EEPROM\n"); - return -EINVAL; - } - for (i = 0; i < COMPLIANCE_STR_CNT; i++) { - str_p = compliance_str[i]; - tmp_buf = buf; - while (*str_p) { - if ((u8)(*tmp_buf) != (u8)(*str_p)) - break; - str_p++; - tmp_buf++; - } + (u8 *)vendor_name)) + vendor_name[0] = '\0'; + else + vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; + if (bnx2x_read_sfp_module_eeprom(params, + SFP_EEPROM_PART_NO_ADDR, + SFP_EEPROM_PART_NO_SIZE, + (u8 *)vendor_pn)) + vendor_pn[0] = '\0'; + else + vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; - if (!(*str_p)) { - DP(NETIF_MSG_LINK, "SFP+ Module verified, " - "index=%x\n", i); - return 0; - } - } - DP(NETIF_MSG_LINK, "Incompliant SFP+ module. Disable module !!!\n"); + printk(KERN_INFO PFX "Warning: " + "Unqualified SFP+ module " + "detected on %s, Port %d from %s part number %s\n" + , bp->dev->name, params->port, + vendor_name, vendor_pn); return -EINVAL; } - static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params, - u8 module_type) + u16 edc_mode) { struct bnx2x *bp = params->bp; u8 port = params->port; - u8 options[SFP_EEPROM_OPTIONS_SIZE]; - u8 limiting_mode; u8 ext_phy_addr = ((params->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); u16 cur_limiting_mode; - if (bnx2x_read_sfp_module_eeprom(params, - SFP_EEPROM_OPTIONS_ADDR, - SFP_EEPROM_OPTIONS_SIZE, - options) != 0) { - DP(NETIF_MSG_LINK, "Failed to read Option field from" - " module EEPROM\n"); - return -EINVAL; - } - limiting_mode = !(options[0] & - SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK); bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, @@ -2550,26 +2705,23 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params, DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n", cur_limiting_mode); - if (limiting_mode && - (module_type != SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE)) { + if (edc_mode == EDC_MODE_LIMITING) { DP(NETIF_MSG_LINK, - "Module options = 0x%x.Setting LIMITING MODE\n", - options[0]); + "Setting LIMITING MODE\n"); bnx2x_cl45_write(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, - SFP_LIMITING_MODE_VALUE); + EDC_MODE_LIMITING); } else { /* LRM mode ( default )*/ - DP(NETIF_MSG_LINK, "Module options = 0x%x.Setting LRM MODE\n", - options[0]); + DP(NETIF_MSG_LINK, "Setting LRM MODE\n"); /* Changing to LRM mode takes quite few seconds. So do it only if current mode is limiting ( default is LRM )*/ - if (cur_limiting_mode != SFP_LIMITING_MODE_VALUE) + if (cur_limiting_mode != EDC_MODE_LIMITING) return 0; bnx2x_cl45_write(bp, port, @@ -2600,6 +2752,56 @@ static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params, return 0; } +static u8 bnx2x_bcm8727_set_limiting_mode(struct link_params *params, + u16 edc_mode) +{ + struct bnx2x *bp = params->bp; + u8 port = params->port; + u16 phy_identifier; + u16 rom_ver2_val; + u8 ext_phy_addr = ((params->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + bnx2x_cl45_read(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &phy_identifier); + + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier & ~(1<<9))); + + bnx2x_cl45_read(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + &rom_ver2_val); + /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */ + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff)); + + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier | (1<<9))); + + return 0; +} + + static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params) { u8 val; @@ -2619,61 +2821,114 @@ static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params) return -EINVAL; } +static void bnx2x_8727_power_module(struct bnx2x *bp, + struct link_params *params, + u8 ext_phy_addr, u8 is_power_up) { + /* Make sure GPIOs are not using for LED mode */ + u16 val; + u8 port = params->port; + /* + * In the GPIO register, bit 4 is use to detemine if the GPIOs are + * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for + * output + * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0 + * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1 + * where the 1st bit is the over-current(only input), and 2nd bit is + * for power( only output ) + */ + + /* + * In case of NOC feature is disabled and power is up, set GPIO control + * as input to enable listening of over-current indication + */ + + if (!(params->feature_config_flags & + FEATURE_CONFIG_BCM8727_NOC) && is_power_up) + val = (1<<4); + else + /* + * Set GPIO control to OUTPUT, and set the power bit + * to according to the is_power_up + */ + val = ((!(is_power_up)) << 1); + + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + val); +} + static u8 bnx2x_sfp_module_detection(struct link_params *params) { struct bnx2x *bp = params->bp; - u8 module_type; + u16 edc_mode; + u8 rc = 0; u8 ext_phy_addr = ((params->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); - - if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) { - DP(NETIF_MSG_LINK, "Module detection is not required " - "for this phy\n"); - return 0; - } + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port].config)); DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n", params->port); - if (bnx2x_get_sfp_module_type(params, - &module_type) != 0) { + if (bnx2x_get_edc_mode(params, &edc_mode) != 0) { DP(NETIF_MSG_LINK, "Failed to get valid module type\n"); - if (!(params->feature_config_flags & - FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) { - /* In case module detection is disabled, it trys to - link up. The issue that can happen here is LRM / - LIMITING mode which set according to the module-type*/ - DP(NETIF_MSG_LINK, "Unable to read module-type." - "Probably due to Bit Stretching." - " Proceeding...\n"); - } else { - return -EINVAL; - } - } else if (bnx2x_verify_sfp_module(params, module_type) != + return -EINVAL; + } else if (bnx2x_verify_sfp_module(params) != 0) { /* check SFP+ module compatibility */ DP(NETIF_MSG_LINK, "Module verification failed!!\n"); + rc = -EINVAL; /* Turn on fault module-detected led */ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_HIGH, params->port); - return -EINVAL; + if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) && + ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) { + /* Shutdown SFP+ module */ + DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n"); + bnx2x_8727_power_module(bp, params, + ext_phy_addr, 0); + return rc; + } + } else { + /* Turn off fault module-detected led */ + DP(NETIF_MSG_LINK, "Turn off fault module-detected led\n"); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_LOW, + params->port); } - /* Turn off fault module-detected led */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_LOW, - params->port); + /* power up the SFP module */ + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) + bnx2x_8727_power_module(bp, params, ext_phy_addr, 1); - /* Check and set limiting mode / LRM mode */ - bnx2x_bcm8726_set_limiting_mode(params, module_type); + /* Check and set limiting mode / LRM mode on 8726. + On 8727 it is done automatically */ + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) + bnx2x_bcm8726_set_limiting_mode(params, edc_mode); + else + bnx2x_bcm8727_set_limiting_mode(params, edc_mode); + /* + * Enable transmit for this module if the module is approved, or + * if unapproved modules should also enable the Tx laser + */ + if (rc == 0 || + (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + bnx2x_sfp_set_transmitter(bp, params->port, + ext_phy_type, ext_phy_addr, 1); + else + bnx2x_sfp_set_transmitter(bp, params->port, + ext_phy_type, ext_phy_addr, 0); - /* Enable transmit for this module */ - bnx2x_bcm8726_set_transmitter(bp, params->port, - ext_phy_addr, 1); - return 0; + return rc; } void bnx2x_handle_module_detect_int(struct link_params *params) @@ -2696,8 +2951,8 @@ void bnx2x_handle_module_detect_int(struct link_params *params) MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, port); - if (bnx2x_wait_for_sfp_module_initialized(params) - == 0) + if (bnx2x_wait_for_sfp_module_initialized(params) == + 0) bnx2x_sfp_module_detection(params); else DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); @@ -2705,13 +2960,22 @@ void bnx2x_handle_module_detect_int(struct link_params *params) u8 ext_phy_addr = ((params->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 ext_phy_type = + XGXS_EXT_PHY_TYPE(params->ext_phy_config); + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port]. + config)); + bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_INT_OUTPUT_SET, port); /* Module was plugged out. */ /* Disable transmit for this module */ - bnx2x_bcm8726_set_transmitter(bp, params->port, - ext_phy_addr, 0); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + bnx2x_sfp_set_transmitter(bp, params->port, + ext_phy_type, ext_phy_addr, 0); } } @@ -3160,6 +3424,9 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) driver is loaded, it reset all registers, including the transmitter */ bnx2x_sfp_module_detection(params); + + /* Set Flow control */ + bnx2x_ext_phy_set_pause(params, vars); if (params->req_line_speed == SPEED_1000) { DP(NETIF_MSG_LINK, "Setting 1G force\n"); bnx2x_cl45_write(bp, params->port, ext_phy_type, @@ -3450,6 +3717,187 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) ((val & (1<<7)) > 0)); break; } + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + { + u16 tmp1; + u16 rx_alarm_ctrl_val; + u16 lasi_ctrl_val; + + /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ + + u16 mod_abs; + rx_alarm_ctrl_val = (1<<2) | (1<<5) ; + lasi_ctrl_val = 0x0004; + + DP(NETIF_MSG_LINK, "Initializing BCM8727\n"); + /* enable LASI */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM_CTRL, + rx_alarm_ctrl_val); + + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_LASI_CTRL, + lasi_ctrl_val); + + /* Initially configure MOD_ABS to interrupt when + module is presence( bit 8) */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); + /* Set EDC off by setting OPTXLOS signal input to low + (bit 9). + When the EDC is off it locks onto a reference clock and + avoids becoming 'lost'.*/ + mod_abs &= ~((1<<8) | (1<<9)); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Make MOD_ABS give interrupt on change */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + &val); + val |= (1<<12); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + val); + + /* Set 8727 GPIOs to input to allow reading from the + 8727 GPIO0 status which reflect SFP+ module + over-current */ + + bnx2x_cl45_read(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + &val); + val &= 0xff8f; /* Reset bits 4-6 */ + bnx2x_cl45_write(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, + val); + + bnx2x_8727_power_module(bp, params, ext_phy_addr, 1); + bnx2x_bcm8073_set_xaui_low_power_mode(params); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_M8051_MSGOUT_REG, + &tmp1); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM, &tmp1); + + /* Set option 1G speed */ + if (params->req_line_speed == SPEED_1000) { + + DP(NETIF_MSG_LINK, "Setting 1G force\n"); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x40); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_10G_CTRL2, 0xD); + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_10G_CTRL2, &tmp1); + DP(NETIF_MSG_LINK, "1.7 = 0x%x \n", tmp1); + + } else if ((params->req_line_speed == + SPEED_AUTO_NEG) && + ((params->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) { + + DP(NETIF_MSG_LINK, "Setting 1G clause37 \n"); + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + MDIO_PMA_REG_8727_MISC_CTRL, 0); + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_AN, 0x1300); + } else { + /* Since the 8727 has only single reset pin, + need to set the 10G registers although it is + default */ + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + MDIO_AN_REG_CTRL, 0x0020); + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_AN_DEVAD, + 0x7, 0x0100); + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x2040); + bnx2x_cl45_write(bp, params->port, ext_phy_type, + ext_phy_addr, MDIO_PMA_DEVAD, + MDIO_PMA_REG_10G_CTRL2, 0x0008); + } + + /* Set 2-wire transfer rate to 400Khz since 100Khz + is not operational */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, + 0xa101); + + /* Set TX PreEmphasis if needed */ + if ((params->feature_config_flags & + FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x," + "TX_CTRL2 0x%x\n", + params->xgxs_config_tx[0], + params->xgxs_config_tx[1]); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TX_CTRL1, + params->xgxs_config_tx[0]); + + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TX_CTRL2, + params->xgxs_config_tx[1]); + } + + break; + } + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: { u16 fw_ver1, fw_ver2; @@ -3561,6 +4009,99 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) return rc; } +static void bnx2x_8727_handle_mod_abs(struct link_params *params) +{ + struct bnx2x *bp = params->bp; + u16 mod_abs, rx_alarm_status; + u8 ext_phy_addr = ((params->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port]. + config)); + bnx2x_cl45_read(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); + if (mod_abs & (1<<8)) { + + /* Module is absent */ + DP(NETIF_MSG_LINK, "MOD_ABS indication " + "show module is absent\n"); + + /* 1. Set mod_abs to detect next module + presence event + 2. Set EDC off by setting OPTXLOS signal input to low + (bit 9). + When the EDC is off it locks onto a reference clock and + avoids becoming 'lost'.*/ + mod_abs &= ~((1<<8)|(1<<9)); + bnx2x_cl45_write(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as + the mod_abs wasn't changed */ + bnx2x_cl45_read(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + + } else { + /* Module is present */ + DP(NETIF_MSG_LINK, "MOD_ABS indication " + "show module is present\n"); + /* First thing, disable transmitter, + and if the module is ok, the + module_detection will enable it*/ + + /* 1. Set mod_abs to detect next module + absent event ( bit 8) + 2. Restore the default polarity of the OPRXLOS signal and + this signal will then correctly indicate the presence or + absence of the Rx signal. (bit 9) */ + mod_abs |= ((1<<8)|(1<<9)); + bnx2x_cl45_write(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as + the mod_abs wasn't changed. This is need to be done + before calling the module detection, otherwise it will clear + the link update alarm */ + bnx2x_cl45_read(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + + + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + bnx2x_sfp_set_transmitter(bp, params->port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, 0); + + if (bnx2x_wait_for_sfp_module_initialized(params) + == 0) + bnx2x_sfp_module_detection(params); + else + DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n"); + } + + DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", + rx_alarm_status); + /* No need to check link status in case of + module plugged in/out */ +} + static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, struct link_vars *vars) @@ -3602,8 +4143,19 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); - DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd); - ext_phy_link_up = (rx_sd & 0x1); + + bnx2x_cl45_read(bp, params->port, ext_phy_type, + ext_phy_addr, + 1, + 0xc809, &val1); + bnx2x_cl45_read(bp, params->port, ext_phy_type, + ext_phy_addr, + 1, + 0xc809, &val1); + + DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1); + ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) + && ((val1 & (1<<8)) == 0)); if (ext_phy_link_up) vars->line_speed = SPEED_10000; break; @@ -3678,8 +4230,160 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, else vars->line_speed = SPEED_10000; } + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + { + u16 link_status = 0; + u16 rx_alarm_status; + /* Check the LASI */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM, &rx_alarm_status); + + DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", + rx_alarm_status); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_LASI_STATUS, &val1); + + DP(NETIF_MSG_LINK, + "8727 LASI status 0x%x\n", + val1); + + /* Clear MSG-OUT */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_M8051_MSGOUT_REG, + &val1); + + /* + * If a module is present and there is need to check + * for over current + */ + if (!(params->feature_config_flags & + FEATURE_CONFIG_BCM8727_NOC) && + !(rx_alarm_status & (1<<5))) { + /* Check over-current using 8727 GPIO0 input*/ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_GPIO_CTRL, + &val1); + + if ((val1 & (1<<8)) == 0) { + DP(NETIF_MSG_LINK, "8727 Power fault" + " has been detected on port" + " %d\n", params->port); + printk(KERN_ERR PFX "Error: Power" + " fault on %s Port %d has" + " been detected and the" + " power to that SFP+ module" + " has been removed to prevent" + " failure of the card. Please" + " remove the SFP+ module and" + " restart the system to clear" + " this error.\n" + , bp->dev->name, params->port); + /* + * Disable all RX_ALARMs except for + * mod_abs + */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM_CTRL, + (1<<5)); + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &val1); + /* Wait for module_absent_event */ + val1 |= (1<<8); + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + val1); + /* Clear RX alarm */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM, + &rx_alarm_status); + break; + } + } /* Over current check */ + + /* When module absent bit is set, check module */ + if (rx_alarm_status & (1<<5)) { + bnx2x_8727_handle_mod_abs(params); + /* Enable all mod_abs and link detection bits */ + bnx2x_cl45_write(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_RX_ALARM_CTRL, + ((1<<5) | (1<<2))); + } + + /* If transmitter is disabled, + ignore false link up indication */ + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &val1); + if (val1 & (1<<15)) { + DP(NETIF_MSG_LINK, "Tx is disabled\n"); + ext_phy_link_up = 0; + break; + } + + bnx2x_cl45_read(bp, params->port, + ext_phy_type, + ext_phy_addr, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_SPEED_LINK_STATUS, + &link_status); + /* Bits 0..2 --> speed detected, + bits 13..15--> link is down */ + if ((link_status & (1<<2)) && + (!(link_status & (1<<15)))) { + ext_phy_link_up = 1; + vars->line_speed = SPEED_10000; + } else if ((link_status & (1<<0)) && + (!(link_status & (1<<13)))) { + ext_phy_link_up = 1; + vars->line_speed = SPEED_1000; + DP(NETIF_MSG_LINK, + "port %x: External link" + " up in 1G\n", params->port); + } else { + ext_phy_link_up = 0; + DP(NETIF_MSG_LINK, + "port %x: External link" + " is down\n", params->port); + } break; + } + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: { @@ -4241,6 +4945,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: @@ -4842,10 +5547,6 @@ static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr) PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); - - /* Disable Transmitter */ - bnx2x_bcm8726_set_transmitter(bp, port, ext_phy_addr, 0); - } u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, @@ -4858,6 +5559,11 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, u32 chip_id = params->chip_id; u8 port = params->port; u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config); + u32 val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_feature_config[params->port]. + config)); + /* disable attentions */ vars->link_status = 0; @@ -4892,6 +5598,21 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + { + + /* Disable Transmitter */ + u8 ext_phy_addr = ((params->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + bnx2x_sfp_set_transmitter(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr, 0); + break; + } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: DP(NETIF_MSG_LINK, "Setting 8073 port %d into " "low power mode\n", @@ -5216,6 +5937,74 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) } +static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base) +{ + u8 ext_phy_addr[PORT_MAX]; + s8 port; + u32 swap_val, swap_override; + DP(NETIF_MSG_LINK, "Executing BCM8727 common init\n"); + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + + bnx2x_hw_reset(bp, 1 ^ (swap_val && swap_override)); + msleep(5); + + /* PART1 - Reset both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + /* Extract the ext phy address for the port */ + u32 ext_phy_config = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].external_phy_config)); + + /* disable attentions */ + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + (NIG_MASK_XGXS0_LINK_STATUS | + NIG_MASK_XGXS0_LINK10G | + NIG_MASK_SERDES0_LINK_STATUS | + NIG_MASK_MI_INT)); + + ext_phy_addr[port] = ((ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* Reset the phy */ + bnx2x_cl45_write(bp, port, + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, + 1<<15); + } + + /* Add delay of 150ms after reset */ + msleep(150); + + /* PART2 - Download firmware to both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + u16 fw_ver1; + + bnx2x_bcm8727_external_rom_boot(bp, port, + ext_phy_addr[port], shmem_base); + + bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, + ext_phy_addr[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + if (fw_ver1 == 0 || fw_ver1 == 0x4321) { + DP(NETIF_MSG_LINK, + "bnx2x_8073_common_init_phy port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); + return -EINVAL; + } + + } + + + + return 0; +} + static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) { @@ -5274,6 +6063,12 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) rc = bnx2x_8073_common_init_phy(bp, shmem_base); break; } + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC: + rc = bnx2x_8727_common_init_phy(bp, shmem_base); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: /* GPIO1 affects both ports, so there's need to pull it for single port alone */ diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h index 19a866d..d25ef45 100644 --- a/drivers/net/bnx2x_link.h +++ b/drivers/net/bnx2x_link.h @@ -39,7 +39,13 @@ #define SPEED_15000 15000 #define SPEED_16000 16000 - +#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 +#define SFP_EEPROM_VENDOR_NAME_SIZE 16 +#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25 +#define SFP_EEPROM_VENDOR_OUI_SIZE 3 +#define SFP_EEPROM_PART_NO_ADDR 0x28 +#define SFP_EEPROM_PART_NO_SIZE 16 +#define PWR_FLT_ERR_MSG_LEN 250 /***********************************************************/ /* Structs */ /***********************************************************/ @@ -91,7 +97,8 @@ struct link_params { u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */ u32 feature_config_flags; #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) -#define FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED (2<<0) +#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) +#define FEATURE_CONFIG_BCM8727_NOC (1<<3) /* Device pointer passed to all callback functions */ struct bnx2x *bp; }; @@ -181,4 +188,7 @@ u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars); u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base); +u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); + #endif /* BNX2X_LINK_H */ diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index b404a9b..197dbe4 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -2637,7 +2637,7 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) { int port = BP_PORT(bp); int reg_offset; - u32 val; + u32 val, swap_val, swap_override; reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); @@ -2661,6 +2661,17 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) MISC_REGISTERS_GPIO_OUTPUT_LOW, port); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + /* The PHY reset is controlled by GPIO 1 */ + /* fake the port number to cancel the swap done in + set_gpio() */ + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port = (swap_val && swap_override) ^ 1; + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + break; + default: break; } @@ -5562,6 +5573,8 @@ static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp) ((phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) || (phy_type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) || + (phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481)); } @@ -5812,6 +5825,7 @@ static int bnx2x_init_common(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: bp->port.need_hw_lock = 1; break; @@ -6050,10 +6064,15 @@ static int bnx2x_init_port(struct bnx2x *bp) break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: /* add SPIO 5 to group 0 */ - val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + { + u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val = REG_RD(bp, reg_addr); val |= AEU_INPUTS_ATTN_BITS_SPIO5; - REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val); + REG_WR(bp, reg_addr, val); + } break; default: @@ -6203,7 +6222,7 @@ init_hw_err: } /* send the MCP a request, block until there is a reply */ -static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) +u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { int func = BP_FUNC(bp); u32 seq = ++bp->fw_seq; @@ -7676,6 +7695,9 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) BNX2X_ERR("This driver needs bc_ver %X but found %X," " please upgrade BC\n", BNX2X_BC_VER, val); } + bp->link_params.feature_config_flags |= + (val >= REQ_BC_VER_4_VRFY_OPT_MDL) ? + FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0; if (BP_E1HVN(bp) == 0) { pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc); @@ -7836,6 +7858,18 @@ static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp, SUPPORTED_Asym_Pause); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8727)\n", + ext_phy_type); + + bp->port.supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n", ext_phy_type); @@ -8099,6 +8133,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) bp->link_params.ext_phy_config = SHMEM_RD(bp, dev_info.port_hw_config[port].external_phy_config); + /* BCM8727_NOC => BCM8727 no over current */ + if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC) { + bp->link_params.ext_phy_config &= + ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + bp->link_params.ext_phy_config |= + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727; + bp->link_params.feature_config_flags |= + FEATURE_CONFIG_BCM8727_NOC; + } + bp->link_params.speed_cap_mask = SHMEM_RD(bp, dev_info.port_hw_config[port].speed_capability_mask); @@ -8119,17 +8164,10 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff); } - config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); - if (config & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED) - bp->link_params.feature_config_flags |= - FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED; - else - bp->link_params.feature_config_flags &= - ~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED; - /* If the device is capable of WoL, set the default state according * to the HW */ + config = SHMEM_RD(bp, dev_info.port_feature_config[port].config); bp->wol = (!(bp->flags & NO_WOL_FLAG) && (config & PORT_FEATURE_WOL_ENABLED)); @@ -8139,8 +8177,8 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) bp->link_params.ext_phy_config, bp->link_params.speed_cap_mask, bp->port.link_config); - bp->link_params.switch_cfg = (bp->port.link_config & - PORT_FEATURE_CONNECTED_SWITCH_MASK); + bp->link_params.switch_cfg |= (bp->port.link_config & + PORT_FEATURE_CONNECTED_SWITCH_MASK); bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg); bnx2x_link_settings_requested(bp); @@ -8336,6 +8374,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: cmd->port = PORT_FIBRE; break; diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 6d77730..d771168 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -5845,25 +5845,33 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_PMA_REG_ROM_VER2 0xca1a #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d -#define MDIO_PMA_REG_GEN_CTRL2 0xca1e +#define MDIO_PMA_REG_PLL_CTRL 0xca1e #define MDIO_PMA_REG_MISC_CTRL0 0xca23 #define MDIO_PMA_REG_LRM_MODE 0xca3f #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 #define MDIO_PMA_REG_MISC_CTRL1 0xca85 -#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL 0x8000 -#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK 0x000c -#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE 0x0000 -#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE 0x0004 -#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 -#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_FAILED 0x000c -#define MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT 0x8002 -#define MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR 0x8003 +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002 +#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff #define MDIO_PMA_REG_8726_TX_CTRL1 0xca01 #define MDIO_PMA_REG_8726_TX_CTRL2 0xca05 +#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309 +#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02 +#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05 +#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 +#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e #define MDIO_PMA_REG_8073_CHIP_REV 0xc801 #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 |